diff options
Diffstat (limited to 'arch/sh')
179 files changed, 20392 insertions, 4880 deletions
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 496d635f89b2..1cd9c8fd927d 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -6,8 +6,7 @@ mainmenu "Linux/SuperH Kernel Configuration" config SUPERH - bool - default y + def_bool y select EMBEDDED help The SuperH is a RISC processor targeted for use in embedded systems @@ -15,36 +14,36 @@ config SUPERH gaming console. The SuperH port has a home page at <http://www.linux-sh.org/>. +config SUPERH32 + def_bool !SUPERH64 + +config SUPERH64 + def_bool y if CPU_SH5 + config RWSEM_GENERIC_SPINLOCK - bool - default y + def_bool y config RWSEM_XCHGADD_ALGORITHM bool config GENERIC_BUG def_bool y - depends on BUG + depends on BUG && SUPERH32 config GENERIC_FIND_NEXT_BIT - bool - default y + def_bool y config GENERIC_HWEIGHT - bool - default y + def_bool y config GENERIC_HARDIRQS - bool - default y + def_bool y config GENERIC_IRQ_PROBE - bool - default y + def_bool y config GENERIC_CALIBRATE_DELAY - bool - default y + def_bool y config GENERIC_IOMAP bool @@ -75,20 +74,16 @@ config ARCH_MAY_HAVE_PC_FDC bool config STACKTRACE_SUPPORT - bool - default y + def_bool y config LOCKDEP_SUPPORT - bool - default y + def_bool y config ARCH_HAS_ILOG2_U32 - bool - default n + def_bool n config ARCH_HAS_ILOG2_U64 - bool - default n + def_bool n config ARCH_NO_VIRT_TO_BUS def_bool y @@ -97,110 +92,234 @@ source "init/Kconfig" menu "System type" -source "arch/sh/mm/Kconfig" +# +# Processor families +# +config CPU_SH2 + bool -menu "Processor features" +config CPU_SH2A + bool + select CPU_SH2 + +config CPU_SH3 + bool + select CPU_HAS_INTEVT + select CPU_HAS_SR_RB + +config CPU_SH4 + bool + select CPU_HAS_INTEVT + select CPU_HAS_SR_RB + select CPU_HAS_PTEA if !CPU_SH4A || CPU_SHX2 + select CPU_HAS_FPU if !CPU_SH4AL_DSP + +config CPU_SH4A + bool + select CPU_SH4 + +config CPU_SH4AL_DSP + bool + select CPU_SH4A + select CPU_HAS_DSP + +config CPU_SH5 + bool + select CPU_HAS_FPU + +config CPU_SHX2 + bool + +config CPU_SHX3 + bool choice - prompt "Endianess selection" - default CPU_LITTLE_ENDIAN - help - Some SuperH machines can be configured for either little or big - endian byte order. These modes require different kernels. + prompt "Processor sub-type selection" -config CPU_LITTLE_ENDIAN - bool "Little Endian" +# +# Processor subtypes +# -config CPU_BIG_ENDIAN - bool "Big Endian" +# SH-2 Processor Support -endchoice +config CPU_SUBTYPE_SH7619 + bool "Support SH7619 processor" + select CPU_SH2 + +# SH-2A Processor Support + +config CPU_SUBTYPE_SH7203 + bool "Support SH7203 processor" + select CPU_SH2A + select CPU_HAS_FPU + +config CPU_SUBTYPE_SH7206 + bool "Support SH7206 processor" + select CPU_SH2A -config SH_FPU - bool "FPU support" - depends on CPU_HAS_FPU - default y +config CPU_SUBTYPE_SH7263 + bool "Support SH7263 processor" + select CPU_SH2A + select CPU_HAS_FPU + +# SH-3 Processor Support + +config CPU_SUBTYPE_SH7705 + bool "Support SH7705 processor" + select CPU_SH3 + +config CPU_SUBTYPE_SH7706 + bool "Support SH7706 processor" + select CPU_SH3 help - Selecting this option will enable support for SH processors that - have FPU units (ie, SH77xx). + Select SH7706 if you have a 133 Mhz SH-3 HD6417706 CPU. - This option must be set in order to enable the FPU. +config CPU_SUBTYPE_SH7707 + bool "Support SH7707 processor" + select CPU_SH3 + help + Select SH7707 if you have a 60 Mhz SH-3 HD6417707 CPU. -config SH_FPU_EMU - bool "FPU emulation support" - depends on !SH_FPU && EXPERIMENTAL - default n +config CPU_SUBTYPE_SH7708 + bool "Support SH7708 processor" + select CPU_SH3 help - Selecting this option will enable support for software FPU emulation. - Most SH-3 users will want to say Y here, whereas most SH-4 users will - want to say N. + Select SH7708 if you have a 60 Mhz SH-3 HD6417708S or + if you have a 100 Mhz SH-3 HD6417708R CPU. -config SH_DSP - bool "DSP support" - depends on CPU_HAS_DSP - default y +config CPU_SUBTYPE_SH7709 + bool "Support SH7709 processor" + select CPU_SH3 help - Selecting this option will enable support for SH processors that - have DSP units (ie, SH2-DSP, SH3-DSP, and SH4AL-DSP). + Select SH7709 if you have a 80 Mhz SH-3 HD6417709 CPU. - This option must be set in order to enable the DSP. +config CPU_SUBTYPE_SH7710 + bool "Support SH7710 processor" + select CPU_SH3 + select CPU_HAS_DSP + help + Select SH7710 if you have a SH3-DSP SH7710 CPU. -config SH_ADC - bool "ADC support" - depends on CPU_SH3 - default y +config CPU_SUBTYPE_SH7712 + bool "Support SH7712 processor" + select CPU_SH3 + select CPU_HAS_DSP help - Selecting this option will allow the Linux kernel to use SH3 on-chip - ADC module. + Select SH7712 if you have a SH3-DSP SH7712 CPU. - If unsure, say N. +config CPU_SUBTYPE_SH7720 + bool "Support SH7720 processor" + select CPU_SH3 + select CPU_HAS_DSP + help + Select SH7720 if you have a SH3-DSP SH7720 CPU. -config SH_STORE_QUEUES - bool "Support for Store Queues" - depends on CPU_SH4 +config CPU_SUBTYPE_SH7721 + bool "Support SH7721 processor" + select CPU_SH3 + select CPU_HAS_DSP help - Selecting this option will enable an in-kernel API for manipulating - the store queues integrated in the SH-4 processors. + Select SH7721 if you have a SH3-DSP SH7721 CPU. -config SPECULATIVE_EXECUTION - bool "Speculative subroutine return" - depends on CPU_SUBTYPE_SH7780 && EXPERIMENTAL +# SH-4 Processor Support + +config CPU_SUBTYPE_SH7750 + bool "Support SH7750 processor" + select CPU_SH4 help - This enables support for a speculative instruction fetch for - subroutine return. There are various pitfalls associated with - this, as outlined in the SH7780 hardware manual. + Select SH7750 if you have a 200 Mhz SH-4 HD6417750 CPU. - If unsure, say N. +config CPU_SUBTYPE_SH7091 + bool "Support SH7091 processor" + select CPU_SH4 + help + Select SH7091 if you have an SH-4 based Sega device (such as + the Dreamcast, Naomi, and Naomi 2). -config CPU_HAS_INTEVT - bool +config CPU_SUBTYPE_SH7750R + bool "Support SH7750R processor" + select CPU_SH4 -config CPU_HAS_MASKREG_IRQ - bool +config CPU_SUBTYPE_SH7750S + bool "Support SH7750S processor" + select CPU_SH4 -config CPU_HAS_IPR_IRQ - bool +config CPU_SUBTYPE_SH7751 + bool "Support SH7751 processor" + select CPU_SH4 + help + Select SH7751 if you have a 166 Mhz SH-4 HD6417751 CPU, + or if you have a HD6417751R CPU. -config CPU_HAS_SR_RB - bool +config CPU_SUBTYPE_SH7751R + bool "Support SH7751R processor" + select CPU_SH4 + +config CPU_SUBTYPE_SH7760 + bool "Support SH7760 processor" + select CPU_SH4 + +config CPU_SUBTYPE_SH4_202 + bool "Support SH4-202 processor" + select CPU_SH4 + +# SH-4A Processor Support + +config CPU_SUBTYPE_SH7763 + bool "Support SH7763 processor" + select CPU_SH4A help - This will enable the use of SR.RB register bank usage. Processors - that are lacking this bit must have another method in place for - accomplishing what is taken care of by the banked registers. + Select SH7763 if you have a SH4A SH7763(R5S77631) CPU. - See <file:Documentation/sh/register-banks.txt> for further - information on SR.RB and register banking in the kernel in general. +config CPU_SUBTYPE_SH7770 + bool "Support SH7770 processor" + select CPU_SH4A -config CPU_HAS_PTEA - bool +config CPU_SUBTYPE_SH7780 + bool "Support SH7780 processor" + select CPU_SH4A -config CPU_HAS_DSP - bool +config CPU_SUBTYPE_SH7785 + bool "Support SH7785 processor" + select CPU_SH4A + select CPU_SHX2 + select ARCH_SPARSEMEM_ENABLE + select SYS_SUPPORTS_NUMA -config CPU_HAS_FPU - bool +config CPU_SUBTYPE_SHX3 + bool "Support SH-X3 processor" + select CPU_SH4A + select CPU_SHX3 + select ARCH_SPARSEMEM_ENABLE + select SYS_SUPPORTS_NUMA + select SYS_SUPPORTS_SMP -endmenu +# SH4AL-DSP Processor Support + +config CPU_SUBTYPE_SH7343 + bool "Support SH7343 processor" + select CPU_SH4AL_DSP + +config CPU_SUBTYPE_SH7722 + bool "Support SH7722 processor" + select CPU_SH4AL_DSP + select CPU_SHX2 + select ARCH_SPARSEMEM_ENABLE + select SYS_SUPPORTS_NUMA + +# SH-5 Processor Support + +config CPU_SUBTYPE_SH5_101 + bool "Support SH5-101 processor" + select CPU_SH5 + +config CPU_SUBTYPE_SH5_103 + bool "Support SH5-103 processor" + +endchoice + +source "arch/sh/mm/Kconfig" +source "arch/sh/Kconfig.cpu" menu "Board support" @@ -321,13 +440,6 @@ config SH_SECUREEDGE5410 This includes both the OEM SecureEdge products as well as the SME product line. -config SH_HS7751RVOIP - bool "HS7751RVOIP" - depends on CPU_SUBTYPE_SH7751R - help - Select HS7751RVOIP if configuring for a Renesas Technology - Sales VoIP board. - config SH_7710VOIPGW bool "SH7710-VOIP-GW" depends on CPU_SUBTYPE_SH7710 @@ -343,6 +455,14 @@ config SH_RTS7751R2D Select RTS7751R2D if configuring for a Renesas Technology Sales SH-Graphics board. +config SH_SDK7780 + bool "SDK7780R3" + depends on CPU_SUBTYPE_SH7780 + select SYS_SUPPORTS_PCI + help + Select SDK7780 if configuring for a Renesas SH7780 SDK7780R3 + evaluation board. + config SH_HIGHLANDER bool "Highlander" depends on CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785 @@ -399,41 +519,47 @@ config SH_MAGIC_PANEL_R2 help Select Magic Panel R2 if configuring for Magic Panel R2. +config SH_CAYMAN + bool "Hitachi Cayman" + depends on CPU_SUBTYPE_SH5_101 || CPU_SUBTYPE_SH5_103 + select SYS_SUPPORTS_PCI + endmenu -source "arch/sh/boards/renesas/hs7751rvoip/Kconfig" source "arch/sh/boards/renesas/rts7751r2d/Kconfig" source "arch/sh/boards/renesas/r7780rp/Kconfig" +source "arch/sh/boards/renesas/sdk7780/Kconfig" source "arch/sh/boards/magicpanelr2/Kconfig" menu "Timer and clock configuration" config SH_TMU - bool "TMU timer support" + def_bool y + prompt "TMU timer support" depends on CPU_SH3 || CPU_SH4 select GENERIC_TIME select GENERIC_CLOCKEVENTS - default y help This enables the use of the TMU as the system timer. config SH_CMT - bool "CMT timer support" + def_bool y + prompt "CMT timer support" depends on CPU_SH2 - default y help This enables the use of the CMT as the system timer. config SH_MTU2 - bool "MTU2 timer support" + def_bool n + prompt "MTU2 timer support" depends on CPU_SH2A - default n help This enables the use of the MTU2 as the system timer. config SH_TIMER_IRQ int - default "28" if CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785 + default "28" if CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785 || \ + CPU_SUBTYPE_SH7763 default "86" if CPU_SUBTYPE_SH7619 default "140" if CPU_SUBTYPE_SH7206 default "16" @@ -445,7 +571,8 @@ config SH_PCLK_FREQ default "32000000" if CPU_SUBTYPE_SH7722 default "33333333" if CPU_SUBTYPE_SH7770 || \ CPU_SUBTYPE_SH7760 || CPU_SUBTYPE_SH7705 || \ - CPU_SUBTYPE_SH7206 + CPU_SUBTYPE_SH7203 || CPU_SUBTYPE_SH7206 || \ + CPU_SUBTYPE_SH7263 default "60000000" if CPU_SUBTYPE_SH7751 || CPU_SUBTYPE_SH7751R default "66000000" if CPU_SUBTYPE_SH4_202 default "50000000" @@ -456,7 +583,7 @@ config SH_PCLK_FREQ config SH_CLK_MD int "CPU Mode Pin Setting" - depends on CPU_SUBTYPE_SH7619 || CPU_SUBTYPE_SH7206 + depends on CPU_SH2 default 6 if CPU_SUBTYPE_SH7206 default 5 if CPU_SUBTYPE_SH7619 default 0 @@ -490,9 +617,8 @@ source "arch/sh/drivers/Kconfig" endmenu config ISA_DMA_API - bool + def_bool y depends on SH_MPC1211 - default y menu "Kernel features" @@ -570,7 +696,7 @@ source "kernel/Kconfig.preempt" config GUSA def_bool y - depends on !SMP + depends on !SMP && SUPERH32 help This enables support for gUSA (general UserSpace Atomicity). This is the default implementation for both UP and non-ll/sc @@ -582,6 +708,16 @@ config GUSA This should only be disabled for special cases where alternate atomicity implementations exist. +config GUSA_RB + bool "Implement atomic operations by roll-back (gRB) (EXPERIMENTAL)" + depends on GUSA && CPU_SH3 || (CPU_SH4 && !CPU_SH4A) + help + Enabling this option will allow the kernel to implement some + atomic operations using a software implemention of load-locked/ + store-conditional (LLSC). On machines which do not have hardware + LLSC, this should be more efficient than the other alternative of + disabling insterrupts around the atomic sequence. + endmenu menu "Boot options" diff --git a/arch/sh/Kconfig.cpu b/arch/sh/Kconfig.cpu new file mode 100644 index 000000000000..d850184d0694 --- /dev/null +++ b/arch/sh/Kconfig.cpu @@ -0,0 +1,115 @@ +menu "Processor features" + +choice + prompt "Endianess selection" + default CPU_LITTLE_ENDIAN + help + Some SuperH machines can be configured for either little or big + endian byte order. These modes require different kernels. + +config CPU_LITTLE_ENDIAN + bool "Little Endian" + +config CPU_BIG_ENDIAN + bool "Big Endian" + +endchoice + +config SH_FPU + def_bool y + prompt "FPU support" + depends on CPU_HAS_FPU + help + Selecting this option will enable support for SH processors that + have FPU units (ie, SH77xx). + + This option must be set in order to enable the FPU. + +config SH64_FPU_DENORM_FLUSH + bool "Flush floating point denorms to zero" + depends on SH_FPU && SUPERH64 + +config SH_FPU_EMU + def_bool n + prompt "FPU emulation support" + depends on !SH_FPU && EXPERIMENTAL + help + Selecting this option will enable support for software FPU emulation. + Most SH-3 users will want to say Y here, whereas most SH-4 users will + want to say N. + +config SH_DSP + def_bool y + prompt "DSP support" + depends on CPU_HAS_DSP + help + Selecting this option will enable support for SH processors that + have DSP units (ie, SH2-DSP, SH3-DSP, and SH4AL-DSP). + + This option must be set in order to enable the DSP. + +config SH_ADC + def_bool y + prompt "ADC support" + depends on CPU_SH3 + help + Selecting this option will allow the Linux kernel to use SH3 on-chip + ADC module. + + If unsure, say N. + +config SH_STORE_QUEUES + bool "Support for Store Queues" + depends on CPU_SH4 + help + Selecting this option will enable an in-kernel API for manipulating + the store queues integrated in the SH-4 processors. + +config SPECULATIVE_EXECUTION + bool "Speculative subroutine return" + depends on CPU_SUBTYPE_SH7780 && EXPERIMENTAL + help + This enables support for a speculative instruction fetch for + subroutine return. There are various pitfalls associated with + this, as outlined in the SH7780 hardware manual. + + If unsure, say N. + +config SH64_USER_MISALIGNED_FIXUP + def_bool y + prompt "Fixup misaligned loads/stores occurring in user mode" + depends on SUPERH64 + +config SH64_ID2815_WORKAROUND + bool "Include workaround for SH5-101 cut2 silicon defect ID2815" + depends on CPU_SUBTYPE_SH5_101 + +config CPU_HAS_INTEVT + bool + +config CPU_HAS_MASKREG_IRQ + bool + +config CPU_HAS_IPR_IRQ + bool + +config CPU_HAS_SR_RB + bool + help + This will enable the use of SR.RB register bank usage. Processors + that are lacking this bit must have another method in place for + accomplishing what is taken care of by the banked registers. + + See <file:Documentation/sh/register-banks.txt> for further + information on SR.RB and register banking in the kernel in general. + +config CPU_HAS_PTEA + bool + +config CPU_HAS_DSP + bool + +config CPU_HAS_FPU + bool + +endmenu diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug index 722da6851f56..f7c716166ce8 100644 --- a/arch/sh/Kconfig.debug +++ b/arch/sh/Kconfig.debug @@ -1,8 +1,7 @@ menu "Kernel hacking" config TRACE_IRQFLAGS_SUPPORT - bool - default y + def_bool y source "lib/Kconfig.debug" @@ -30,12 +29,13 @@ config EARLY_SCIF_CONSOLE config EARLY_SCIF_CONSOLE_PORT hex depends on EARLY_SCIF_CONSOLE - default "0xffe00000" if CPU_SUBTYPE_SH7780 + default "0xffe00000" if CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7763 default "0xffea0000" if CPU_SUBTYPE_SH7785 - default "0xfffe9800" if CPU_SUBTYPE_SH7206 + default "0xfffe8000" if CPU_SUBTYPE_SH7203 + default "0xfffe9800" if CPU_SUBTYPE_SH7206 || CPU_SUBTYPE_SH7263 default "0xf8420000" if CPU_SUBTYPE_SH7619 default "0xa4400000" if CPU_SUBTYPE_SH7712 || CPU_SUBTYPE_SH7705 - default "0xa4430000" if CPU_SUBTYPE_SH7720 + default "0xa4430000" if CPU_SUBTYPE_SH7720 || CPU_SUBTYPE_SH7721 default "0xffc30000" if CPU_SUBTYPE_SHX3 default "0xffe80000" if CPU_SH4 default "0x00000000" @@ -62,7 +62,7 @@ config DEBUG_BOOTMEM config DEBUG_STACKOVERFLOW bool "Check for stack overflows" - depends on DEBUG_KERNEL + depends on DEBUG_KERNEL && SUPERH32 help This option will cause messages to be printed if free stack space drops below a certain limit. @@ -88,7 +88,7 @@ config 4KSTACKS config IRQSTACKS bool "Use separate kernel stacks when processing interrupts" - depends on DEBUG_KERNEL + depends on DEBUG_KERNEL && SUPERH32 help If you say Y here the kernel will use separate kernel stacks for handling hard and soft interrupts. This can help avoid @@ -119,19 +119,19 @@ config COMPILE_OPTIONS depends on MORE_COMPILE_OPTIONS config KGDB_NMI - bool "Enter KGDB on NMI" - default n + def_bool n + prompt "Enter KGDB on NMI" config SH_KGDB_CONSOLE - bool "Console messages through GDB" + def_bool n + prompt "Console messages through GDB" depends on !SERIAL_SH_SCI_CONSOLE && SERIAL_SH_SCI=y select SERIAL_CORE_CONSOLE - default n config KGDB_SYSRQ - bool "Allow SysRq 'G' to enter KGDB" + def_bool y + prompt "Allow SysRq 'G' to enter KGDB" depends on MAGIC_SYSRQ - default y comment "Serial port setup" @@ -174,4 +174,29 @@ endchoice endmenu +if SUPERH64 + +config SH64_PROC_ASIDS + bool "Debug: report ASIDs through /proc/asids" + depends on PROC_FS + +config SH64_SR_WATCH + bool "Debug: set SR.WATCH to enable hardware watchpoints and trace" + +config POOR_MANS_STRACE + bool "Debug: enable rudimentary strace facility" + help + This option allows system calls to be traced to the console. It also + aids in detecting kernel stack underflow. It is useful for debugging + early-userland problems (e.g. init incurring fatal exceptions.) + +config SH_ALPHANUMERIC + bool "Enable debug outputs to on-board alphanumeric display" + depends on SH_CAYMAN + +config SH_NO_BSS_INIT + bool "Avoid zeroing BSS (to speed-up startup on suitable platforms)" + +endif + endmenu diff --git a/arch/sh/Makefile b/arch/sh/Makefile index e189fae8b60c..17fc36186bf4 100644 --- a/arch/sh/Makefile +++ b/arch/sh/Makefile @@ -1,17 +1,13 @@ -# $Id: Makefile,v 1.35 2004/04/15 03:39:20 sugioka Exp $ # -# This file is subject to the terms and conditions of the GNU General Public -# License. See the file "COPYING" in the main directory of this archive -# for more details. +# arch/sh/Makefile # # Copyright (C) 1999 Kaz Kojima # Copyright (C) 2002, 2003, 2004 Paul Mundt # Copyright (C) 2002 M. R. Brown # -# This file is included by the global makefile so that you can add your own -# architecture-specific flags and dependencies. Remember to do have actions -# for "archclean" and "archdep" for cleaning up and making dependencies for -# this architecture +# This file is subject to the terms and conditions of the GNU General Public +# License. See the file "COPYING" in the main directory of this archive +# for more details. # isa-y := any isa-$(CONFIG_SH_DSP) := sh @@ -21,13 +17,9 @@ isa-$(CONFIG_CPU_SH3) := sh3 isa-$(CONFIG_CPU_SH4) := sh4 isa-$(CONFIG_CPU_SH4A) := sh4a isa-$(CONFIG_CPU_SH4AL_DSP) := sh4al - +isa-$(CONFIG_CPU_SH5) := shmedia isa-$(CONFIG_SH_DSP) := $(isa-y)-dsp -ifndef CONFIG_MMU -isa-y := $(isa-y)-nommu -endif - ifndef CONFIG_SH_DSP ifndef CONFIG_SH_FPU isa-y := $(isa-y)-nofpu @@ -44,6 +36,7 @@ cflags-$(CONFIG_CPU_SH4) := $(call cc-option,-m4,) \ $(call cc-option,-mno-implicit-fp,-m4-nofpu) cflags-$(CONFIG_CPU_SH4A) += $(call cc-option,-m4a,) \ $(call cc-option,-m4a-nofpu,) +cflags-$(CONFIG_CPU_SH5) := $(call cc-option,-m5-32media-nofpu,) cflags-$(CONFIG_CPU_BIG_ENDIAN) += -mb cflags-$(CONFIG_CPU_LITTLE_ENDIAN) += -ml @@ -66,22 +59,27 @@ cflags-y += $(isaflags-y) -ffreestanding cflags-$(CONFIG_MORE_COMPILE_OPTIONS) += \ $(shell echo $(CONFIG_COMPILE_OPTIONS) | sed -e 's/"//g') -OBJCOPYFLAGS := -O binary -R .note -R .note.gnu.build-id -R .comment -R .stab -R .stabstr -S +OBJCOPYFLAGS := -O binary -R .note -R .note.gnu.build-id -R .comment \ + -R .stab -R .stabstr -S -# -# arch/sh/defconfig doesn't reflect any real hardware, and as such should -# never be used by anyone. Use a board-specific defconfig that has a -# reasonable chance of being current instead. -# -KBUILD_DEFCONFIG := r7780rp_defconfig +# Give the various platforms the opportunity to set default image types +defaultimage-$(CONFIG_SUPERH32) := zImage -KBUILD_IMAGE := arch/sh/boot/zImage +# Set some sensible Kbuild defaults +KBUILD_DEFCONFIG := r7780mp_defconfig +KBUILD_IMAGE := $(defaultimage-y) # # Choosing incompatible machines durings configuration will result in # error messages during linking. # -LDFLAGS_vmlinux += -e _stext +ifdef CONFIG_SUPERH32 +LDFLAGS_vmlinux += -e _stext +else +LDFLAGS_vmlinux += --defsym phys_stext=_stext-$(CONFIG_PAGE_OFFSET) \ + --defsym phys_stext_shmedia=phys_stext+1 \ + -e phys_stext_shmedia +endif ifdef CONFIG_CPU_LITTLE_ENDIAN LDFLAGS_vmlinux += --defsym 'jiffies=jiffies_64' @@ -94,7 +92,9 @@ endif KBUILD_CFLAGS += -pipe $(cflags-y) KBUILD_AFLAGS += $(cflags-y) -head-y := arch/sh/kernel/head.o arch/sh/kernel/init_task.o +head-y := arch/sh/kernel/init_task.o +head-$(CONFIG_SUPERH32) += arch/sh/kernel/head_32.o +head-$(CONFIG_SUPERH64) += arch/sh/kernel/head_64.o LIBGCC := $(shell $(CC) $(KBUILD_CFLAGS) -print-libgcc-file-name) @@ -112,11 +112,11 @@ machdir-$(CONFIG_SH_DREAMCAST) += dreamcast machdir-$(CONFIG_SH_MPC1211) += mpc1211 machdir-$(CONFIG_SH_SH03) += sh03 machdir-$(CONFIG_SH_SECUREEDGE5410) += snapgear -machdir-$(CONFIG_SH_HS7751RVOIP) += renesas/hs7751rvoip machdir-$(CONFIG_SH_RTS7751R2D) += renesas/rts7751r2d machdir-$(CONFIG_SH_7751_SYSTEMH) += renesas/systemh machdir-$(CONFIG_SH_EDOSK7705) += renesas/edosk7705 machdir-$(CONFIG_SH_HIGHLANDER) += renesas/r7780rp +machdir-$(CONFIG_SH_SDK7780) += renesas/sdk7780 machdir-$(CONFIG_SH_7710VOIPGW) += renesas/sh7710voipgw machdir-$(CONFIG_SH_X3PROTO) += renesas/x3proto machdir-$(CONFIG_SH_SH4202_MICRODEV) += superh/microdev @@ -127,6 +127,7 @@ machdir-$(CONFIG_SH_7206_SOLUTION_ENGINE) += se/7206 machdir-$(CONFIG_SH_7619_SOLUTION_ENGINE) += se/7619 machdir-$(CONFIG_SH_LBOX_RE2) += lboxre2 machdir-$(CONFIG_SH_MAGIC_PANEL_R2) += magicpanelr2 +machdir-$(CONFIG_SH_CAYMAN) += cayman incdir-y := $(notdir $(machdir-y)) @@ -137,22 +138,22 @@ endif # Companion chips core-$(CONFIG_HD6446X_SERIES) += arch/sh/cchips/hd6446x/ -core-$(CONFIG_MFD_SM501) += arch/sh/cchips/voyagergx/ cpuincdir-$(CONFIG_CPU_SH2) := cpu-sh2 cpuincdir-$(CONFIG_CPU_SH2A) := cpu-sh2a cpuincdir-$(CONFIG_CPU_SH3) := cpu-sh3 cpuincdir-$(CONFIG_CPU_SH4) := cpu-sh4 +cpuincdir-$(CONFIG_CPU_SH5) := cpu-sh5 -libs-y := arch/sh/lib/ $(libs-y) $(LIBGCC) +libs-$(CONFIG_SUPERH32) := arch/sh/lib/ $(libs-y) +libs-$(CONFIG_SUPERH64) := arch/sh/lib64/ $(libs-y) +libs-y += $(LIBGCC) drivers-y += arch/sh/drivers/ drivers-$(CONFIG_OPROFILE) += arch/sh/oprofile/ boot := arch/sh/boot -CPPFLAGS_vmlinux.lds := -traditional - incdir-prefix := $(srctree)/include/asm-sh/ # Update machine arch and proc symlinks if something which affects @@ -196,29 +197,61 @@ include/asm-sh/.mach: $(wildcard include/config/sh/*.h) \ done @touch $@ -archprepare: include/asm-sh/.cpu include/asm-sh/.mach maketools - PHONY += maketools FORCE + maketools: include/linux/version.h FORCE $(Q)$(MAKE) $(build)=arch/sh/tools include/asm-sh/machtypes.h -all: zImage +all: $(KBUILD_IMAGE) zImage uImage uImage.srec vmlinux.srec: vmlinux $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@ compressed: zImage +archprepare: include/asm-sh/.cpu include/asm-sh/.mach maketools \ + arch/sh/lib64/syscalltab.h + archclean: $(Q)$(MAKE) $(clean)=$(boot) -CLEAN_FILES += include/asm-sh/machtypes.h \ - include/asm-sh/cpu include/asm-sh/.cpu \ - include/asm-sh/mach include/asm-sh/.mach - define archhelp @echo '* zImage - Compressed kernel image' @echo ' vmlinux.srec - Create an ELF S-record' @echo ' uImage - Create a bootable image for U-Boot' @echo ' uImage.srec - Create an S-record for U-Boot' endef + +define filechk_gen-syscalltab + (set -e; \ + echo "/*"; \ + echo " * DO NOT MODIFY."; \ + echo " *"; \ + echo " * This file was generated by arch/sh/Makefile"; \ + echo " * Any changes will be reverted at build time."; \ + echo " */"; \ + echo ""; \ + echo "#ifndef __SYSCALLTAB_H"; \ + echo "#define __SYSCALLTAB_H"; \ + echo ""; \ + echo "#include <linux/kernel.h>"; \ + echo ""; \ + echo "struct syscall_info {"; \ + echo " const char *name;"; \ + echo "} syscall_info_table[] = {"; \ + sed -e '/^.*\.long /!d;s// { "/;s/\(\([^/]*\)\/\)\{1\}.*/\2/; \ + s/[ \t]*$$//g;s/$$/" },/;s/\("\)sys_/\1/g'; \ + echo "};"; \ + echo ""; \ + echo "#define NUM_SYSCALL_INFO_ENTRIES ARRAY_SIZE(syscall_info_table)";\ + echo ""; \ + echo "#endif /* __SYSCALLTAB_H */" ) +endef + +arch/sh/lib64/syscalltab.h: arch/sh/kernel/syscalls_64.S + $(call filechk,gen-syscalltab) + +CLEAN_FILES += arch/sh/lib64/syscalltab.h \ + include/asm-sh/machtypes.h \ + include/asm-sh/cpu include/asm-sh/.cpu \ + include/asm-sh/mach include/asm-sh/.mach diff --git a/arch/sh/boards/cayman/Makefile b/arch/sh/boards/cayman/Makefile new file mode 100644 index 000000000000..489a8f867368 --- /dev/null +++ b/arch/sh/boards/cayman/Makefile @@ -0,0 +1,5 @@ +# +# Makefile for the Hitachi Cayman specific parts of the kernel +# +obj-y := setup.o irq.o +obj-$(CONFIG_HEARTBEAT) += led.o diff --git a/arch/sh/boards/cayman/irq.c b/arch/sh/boards/cayman/irq.c new file mode 100644 index 000000000000..30ec7bebfaf1 --- /dev/null +++ b/arch/sh/boards/cayman/irq.c @@ -0,0 +1,197 @@ +/* + * arch/sh/mach-cayman/irq.c - SH-5 Cayman Interrupt Support + * + * This file handles the board specific parts of the Cayman interrupt system + * + * Copyright (C) 2002 Stuart Menefy + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/io.h> +#include <linux/irq.h> +#include <linux/interrupt.h> +#include <linux/signal.h> +#include <asm/cpu/irq.h> +#include <asm/page.h> + +/* Setup for the SMSC FDC37C935 / LAN91C100FD */ +#define SMSC_IRQ IRQ_IRL1 + +/* Setup for PCI Bus 2, which transmits interrupts via the EPLD */ +#define PCI2_IRQ IRQ_IRL3 + +unsigned long epld_virt; + +#define EPLD_BASE 0x04002000 +#define EPLD_STATUS_BASE (epld_virt + 0x10) +#define EPLD_MASK_BASE (epld_virt + 0x20) + +/* Note the SMSC SuperIO chip and SMSC LAN chip interrupts are all muxed onto + the same SH-5 interrupt */ + +static irqreturn_t cayman_interrupt_smsc(int irq, void *dev_id) +{ + printk(KERN_INFO "CAYMAN: spurious SMSC interrupt\n"); + return IRQ_NONE; +} + +static irqreturn_t cayman_interrupt_pci2(int irq, void *dev_id) +{ + printk(KERN_INFO "CAYMAN: spurious PCI interrupt, IRQ %d\n", irq); + return IRQ_NONE; +} + +static struct irqaction cayman_action_smsc = { + .name = "Cayman SMSC Mux", + .handler = cayman_interrupt_smsc, + .flags = IRQF_DISABLED, +}; + +static struct irqaction cayman_action_pci2 = { + .name = "Cayman PCI2 Mux", + .handler = cayman_interrupt_pci2, + .flags = IRQF_DISABLED, +}; + +static void enable_cayman_irq(unsigned int irq) +{ + unsigned long flags; + unsigned long mask; + unsigned int reg; + unsigned char bit; + + irq -= START_EXT_IRQS; + reg = EPLD_MASK_BASE + ((irq / 8) << 2); + bit = 1<<(irq % 8); + local_irq_save(flags); + mask = ctrl_inl(reg); + mask |= bit; + ctrl_outl(mask, reg); + local_irq_restore(flags); +} + +void disable_cayman_irq(unsigned int irq) +{ + unsigned long flags; + unsigned long mask; + unsigned int reg; + unsigned char bit; + + irq -= START_EXT_IRQS; + reg = EPLD_MASK_BASE + ((irq / 8) << 2); + bit = 1<<(irq % 8); + local_irq_save(flags); + mask = ctrl_inl(reg); + mask &= ~bit; + ctrl_outl(mask, reg); + local_irq_restore(flags); +} + +static void ack_cayman_irq(unsigned int irq) +{ + disable_cayman_irq(irq); +} + +static void end_cayman_irq(unsigned int irq) +{ + if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) + enable_cayman_irq(irq); +} + +static unsigned int startup_cayman_irq(unsigned int irq) +{ + enable_cayman_irq(irq); + return 0; /* never anything pending */ +} + +static void shutdown_cayman_irq(unsigned int irq) +{ + disable_cayman_irq(irq); +} + +struct hw_interrupt_type cayman_irq_type = { + .typename = "Cayman-IRQ", + .startup = startup_cayman_irq, + .shutdown = shutdown_cayman_irq, + .enable = enable_cayman_irq, + .disable = disable_cayman_irq, + .ack = ack_cayman_irq, + .end = end_cayman_irq, +}; + +int cayman_irq_demux(int evt) +{ + int irq = intc_evt_to_irq[evt]; + + if (irq == SMSC_IRQ) { + unsigned long status; + int i; + + status = ctrl_inl(EPLD_STATUS_BASE) & + ctrl_inl(EPLD_MASK_BASE) & 0xff; + if (status == 0) { + irq = -1; + } else { + for (i=0; i<8; i++) { + if (status & (1<<i)) + break; + } + irq = START_EXT_IRQS + i; + } + } + + if (irq == PCI2_IRQ) { + unsigned long status; + int i; + + status = ctrl_inl(EPLD_STATUS_BASE + 3 * sizeof(u32)) & + ctrl_inl(EPLD_MASK_BASE + 3 * sizeof(u32)) & 0xff; + if (status == 0) { + irq = -1; + } else { + for (i=0; i<8; i++) { + if (status & (1<<i)) + break; + } + irq = START_EXT_IRQS + (3 * 8) + i; + } + } + + return irq; +} + +#if defined(CONFIG_PROC_FS) && defined(CONFIG_SYSCTL) +int cayman_irq_describe(char* p, int irq) +{ + if (irq < NR_INTC_IRQS) { + return intc_irq_describe(p, irq); + } else if (irq < NR_INTC_IRQS + 8) { + return sprintf(p, "(SMSC %d)", irq - NR_INTC_IRQS); + } else if ((irq >= NR_INTC_IRQS + 24) && (irq < NR_INTC_IRQS + 32)) { + return sprintf(p, "(PCI2 %d)", irq - (NR_INTC_IRQS + 24)); + } + + return 0; +} +#endif + +void init_cayman_irq(void) +{ + int i; + + epld_virt = onchip_remap(EPLD_BASE, 1024, "EPLD"); + if (!epld_virt) { + printk(KERN_ERR "Cayman IRQ: Unable to remap EPLD\n"); + return; + } + + for (i=0; i<NR_EXT_IRQS; i++) { + irq_desc[START_EXT_IRQS + i].chip = &cayman_irq_type; + } + + /* Setup the SMSC interrupt */ + setup_irq(SMSC_IRQ, &cayman_action_smsc); + setup_irq(PCI2_IRQ, &cayman_action_pci2); +} diff --git a/arch/sh/boards/cayman/led.c b/arch/sh/boards/cayman/led.c new file mode 100644 index 000000000000..a808eac4ecd6 --- /dev/null +++ b/arch/sh/boards/cayman/led.c @@ -0,0 +1,51 @@ +/* + * arch/sh/boards/cayman/led.c + * + * Copyright (C) 2002 Stuart Menefy <stuart.menefy@st.com> + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + * + * Flash the LEDs + */ +#include <asm/io.h> + +/* +** It is supposed these functions to be used for a low level +** debugging (via Cayman LEDs), hence to be available as soon +** as possible. +** Unfortunately Cayman LEDs relies on Cayman EPLD to be mapped +** (this happen when IRQ are initialized... quite late). +** These triky dependencies should be removed. Temporary, it +** may be enough to NOP until EPLD is mapped. +*/ + +extern unsigned long epld_virt; + +#define LED_ADDR (epld_virt + 0x008) +#define HDSP2534_ADDR (epld_virt + 0x100) + +void mach_led(int position, int value) +{ + if (!epld_virt) + return; + + if (value) + ctrl_outl(0, LED_ADDR); + else + ctrl_outl(1, LED_ADDR); + +} + +void mach_alphanum(int position, unsigned char value) +{ + if (!epld_virt) + return; + + ctrl_outb(value, HDSP2534_ADDR + 0xe0 + (position << 2)); +} + +void mach_alphanum_brightness(int setting) +{ + ctrl_outb(setting & 7, HDSP2534_ADDR + 0xc0); +} diff --git a/arch/sh/boards/cayman/setup.c b/arch/sh/boards/cayman/setup.c new file mode 100644 index 000000000000..8c9fa472d8f5 --- /dev/null +++ b/arch/sh/boards/cayman/setup.c @@ -0,0 +1,187 @@ +/* + * arch/sh/mach-cayman/setup.c + * + * SH5 Cayman support + * + * Copyright (C) 2002 David J. Mckay & Benedict Gaster + * Copyright (C) 2003 - 2007 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/init.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <asm/cpu/irq.h> + +/* + * Platform Dependent Interrupt Priorities. + */ + +/* Using defaults defined in irq.h */ +#define RES NO_PRIORITY /* Disabled */ +#define IR0 IRL0_PRIORITY /* IRLs */ +#define IR1 IRL1_PRIORITY +#define IR2 IRL2_PRIORITY +#define IR3 IRL3_PRIORITY +#define PCA INTA_PRIORITY /* PCI Ints */ +#define PCB INTB_PRIORITY +#define PCC INTC_PRIORITY +#define PCD INTD_PRIORITY +#define SER TOP_PRIORITY +#define ERR TOP_PRIORITY +#define PW0 TOP_PRIORITY +#define PW1 TOP_PRIORITY +#define PW2 TOP_PRIORITY +#define PW3 TOP_PRIORITY +#define DM0 NO_PRIORITY /* DMA Ints */ +#define DM1 NO_PRIORITY +#define DM2 NO_PRIORITY +#define DM3 NO_PRIORITY +#define DAE NO_PRIORITY +#define TU0 TIMER_PRIORITY /* TMU Ints */ +#define TU1 NO_PRIORITY +#define TU2 NO_PRIORITY +#define TI2 NO_PRIORITY +#define ATI NO_PRIORITY /* RTC Ints */ +#define PRI NO_PRIORITY +#define CUI RTC_PRIORITY +#define ERI SCIF_PRIORITY /* SCIF Ints */ +#define RXI SCIF_PRIORITY +#define BRI SCIF_PRIORITY +#define TXI SCIF_PRIORITY +#define ITI TOP_PRIORITY /* WDT Ints */ + +/* Setup for the SMSC FDC37C935 */ +#define SMSC_SUPERIO_BASE 0x04000000 +#define SMSC_CONFIG_PORT_ADDR 0x3f0 +#define SMSC_INDEX_PORT_ADDR SMSC_CONFIG_PORT_ADDR +#define SMSC_DATA_PORT_ADDR 0x3f1 + +#define SMSC_ENTER_CONFIG_KEY 0x55 +#define SMSC_EXIT_CONFIG_KEY 0xaa + +#define SMCS_LOGICAL_DEV_INDEX 0x07 +#define SMSC_DEVICE_ID_INDEX 0x20 +#define SMSC_DEVICE_REV_INDEX 0x21 +#define SMSC_ACTIVATE_INDEX 0x30 +#define SMSC_PRIMARY_BASE_INDEX 0x60 +#define SMSC_SECONDARY_BASE_INDEX 0x62 +#define SMSC_PRIMARY_INT_INDEX 0x70 +#define SMSC_SECONDARY_INT_INDEX 0x72 + +#define SMSC_IDE1_DEVICE 1 +#define SMSC_KEYBOARD_DEVICE 7 +#define SMSC_CONFIG_REGISTERS 8 + +#define SMSC_SUPERIO_READ_INDEXED(index) ({ \ + outb((index), SMSC_INDEX_PORT_ADDR); \ + inb(SMSC_DATA_PORT_ADDR); }) +#define SMSC_SUPERIO_WRITE_INDEXED(val, index) ({ \ + outb((index), SMSC_INDEX_PORT_ADDR); \ + outb((val), SMSC_DATA_PORT_ADDR); }) + +#define IDE1_PRIMARY_BASE 0x01f0 +#define IDE1_SECONDARY_BASE 0x03f6 + +unsigned long smsc_superio_virt; + +int platform_int_priority[NR_INTC_IRQS] = { + IR0, IR1, IR2, IR3, PCA, PCB, PCC, PCD, /* IRQ 0- 7 */ + RES, RES, RES, RES, SER, ERR, PW3, PW2, /* IRQ 8-15 */ + PW1, PW0, DM0, DM1, DM2, DM3, DAE, RES, /* IRQ 16-23 */ + RES, RES, RES, RES, RES, RES, RES, RES, /* IRQ 24-31 */ + TU0, TU1, TU2, TI2, ATI, PRI, CUI, ERI, /* IRQ 32-39 */ + RXI, BRI, TXI, RES, RES, RES, RES, RES, /* IRQ 40-47 */ + RES, RES, RES, RES, RES, RES, RES, RES, /* IRQ 48-55 */ + RES, RES, RES, RES, RES, RES, RES, ITI, /* IRQ 56-63 */ +}; + +static int __init smsc_superio_setup(void) +{ + unsigned char devid, devrev; + + smsc_superio_virt = onchip_remap(SMSC_SUPERIO_BASE, 1024, "SMSC SuperIO"); + if (!smsc_superio_virt) { + panic("Unable to remap SMSC SuperIO\n"); + } + + /* Initially the chip is in run state */ + /* Put it into configuration state */ + outb(SMSC_ENTER_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR); + outb(SMSC_ENTER_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR); + + /* Read device ID info */ + devid = SMSC_SUPERIO_READ_INDEXED(SMSC_DEVICE_ID_INDEX); + devrev = SMSC_SUPERIO_READ_INDEXED(SMSC_DEVICE_REV_INDEX); + printk("SMSC SuperIO devid %02x rev %02x\n", devid, devrev); + + /* Select the keyboard device */ + SMSC_SUPERIO_WRITE_INDEXED(SMSC_KEYBOARD_DEVICE, SMCS_LOGICAL_DEV_INDEX); + + /* enable it */ + SMSC_SUPERIO_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX); + + /* Select the interrupts */ + /* On a PC keyboard is IRQ1, mouse is IRQ12 */ + SMSC_SUPERIO_WRITE_INDEXED(1, SMSC_PRIMARY_INT_INDEX); + SMSC_SUPERIO_WRITE_INDEXED(12, SMSC_SECONDARY_INT_INDEX); + +#ifdef CONFIG_IDE + /* + * Only IDE1 exists on the Cayman + */ + + /* Power it on */ + SMSC_SUPERIO_WRITE_INDEXED(1 << SMSC_IDE1_DEVICE, 0x22); + + SMSC_SUPERIO_WRITE_INDEXED(SMSC_IDE1_DEVICE, SMCS_LOGICAL_DEV_INDEX); + SMSC_SUPERIO_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX); + + SMSC_SUPERIO_WRITE_INDEXED(IDE1_PRIMARY_BASE >> 8, + SMSC_PRIMARY_BASE_INDEX + 0); + SMSC_SUPERIO_WRITE_INDEXED(IDE1_PRIMARY_BASE & 0xff, + SMSC_PRIMARY_BASE_INDEX + 1); + + SMSC_SUPERIO_WRITE_INDEXED(IDE1_SECONDARY_BASE >> 8, + SMSC_SECONDARY_BASE_INDEX + 0); + SMSC_SUPERIO_WRITE_INDEXED(IDE1_SECONDARY_BASE & 0xff, + SMSC_SECONDARY_BASE_INDEX + 1); + + SMSC_SUPERIO_WRITE_INDEXED(14, SMSC_PRIMARY_INT_INDEX); + + SMSC_SUPERIO_WRITE_INDEXED(SMSC_CONFIG_REGISTERS, + SMCS_LOGICAL_DEV_INDEX); + + SMSC_SUPERIO_WRITE_INDEXED(0x00, 0xc2); /* GP42 = nIDE1_OE */ + SMSC_SUPERIO_WRITE_INDEXED(0x01, 0xc5); /* GP45 = IDE1_IRQ */ + SMSC_SUPERIO_WRITE_INDEXED(0x00, 0xc6); /* GP46 = nIOROP */ + SMSC_SUPERIO_WRITE_INDEXED(0x00, 0xc7); /* GP47 = nIOWOP */ +#endif + + /* Exit the configuration state */ + outb(SMSC_EXIT_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR); + + return 0; +} +__initcall(smsc_superio_setup); + +static void __iomem *cayman_ioport_map(unsigned long port, unsigned int len) +{ + if (port < 0x400) { + extern unsigned long smsc_superio_virt; + return (void __iomem *)((port << 2) | smsc_superio_virt); + } + + return (void __iomem *)port; +} + +extern void init_cayman_irq(void); + +static struct sh_machine_vector mv_cayman __initmv = { + .mv_name = "Hitachi Cayman", + .mv_nr_irqs = 64, + .mv_ioport_map = cayman_ioport_map, + .mv_init_irq = init_cayman_irq, +}; diff --git a/arch/sh/boards/dreamcast/irq.c b/arch/sh/boards/dreamcast/irq.c index 5bf01f86c20c..9d0673a9092a 100644 --- a/arch/sh/boards/dreamcast/irq.c +++ b/arch/sh/boards/dreamcast/irq.c @@ -136,7 +136,7 @@ int systemasic_irq_demux(int irq) emr = EMR_BASE + (level << 4) + (level << 2); esr = ESR_BASE + (level << 2); - /* Mask the ESR to filter any spurious, unwanted interrtupts */ + /* Mask the ESR to filter any spurious, unwanted interrupts */ status = inl(esr); status &= inl(emr); diff --git a/arch/sh/boards/dreamcast/setup.c b/arch/sh/boards/dreamcast/setup.c index 8799df6e866a..2581c8cd5df7 100644 --- a/arch/sh/boards/dreamcast/setup.c +++ b/arch/sh/boards/dreamcast/setup.c @@ -33,9 +33,6 @@ extern void aica_time_init(void); extern int gapspci_init(void); extern int systemasic_irq_demux(int); -void *dreamcast_consistent_alloc(struct device *, size_t, dma_addr_t *, gfp_t); -int dreamcast_consistent_free(struct device *, size_t, void *, dma_addr_t); - static void __init dreamcast_setup(char **cmdline_p) { int i; @@ -64,9 +61,4 @@ static struct sh_machine_vector mv_dreamcast __initmv = { .mv_name = "Sega Dreamcast", .mv_setup = dreamcast_setup, .mv_irq_demux = systemasic_irq_demux, - -#ifdef CONFIG_PCI - .mv_consistent_alloc = dreamcast_consistent_alloc, - .mv_consistent_free = dreamcast_consistent_free, -#endif }; diff --git a/arch/sh/boards/landisk/gio.c b/arch/sh/boards/landisk/gio.c index a37643d002b2..17025080db35 100644 --- a/arch/sh/boards/landisk/gio.c +++ b/arch/sh/boards/landisk/gio.c @@ -121,7 +121,7 @@ static int gio_ioctl(struct inode *inode, struct file *filp, return 0; } -static struct file_operations gio_fops = { +static const struct file_operations gio_fops = { .owner = THIS_MODULE, .open = gio_open, /* open */ .release = gio_close, /* release */ diff --git a/arch/sh/boards/renesas/hs7751rvoip/Kconfig b/arch/sh/boards/renesas/hs7751rvoip/Kconfig deleted file mode 100644 index 1743be477be5..000000000000 --- a/arch/sh/boards/renesas/hs7751rvoip/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if SH_HS7751RVOIP - -menu "HS7751RVoIP options" - -config HS7751RVOIP_CODEC - bool "Support VoIP Codec section" - help - Selecting this option will support CODEC section. - -endmenu - -endif diff --git a/arch/sh/boards/renesas/hs7751rvoip/Makefile b/arch/sh/boards/renesas/hs7751rvoip/Makefile deleted file mode 100644 index e626377c55ee..000000000000 --- a/arch/sh/boards/renesas/hs7751rvoip/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# Makefile for the HS7751RVoIP specific parts of the kernel -# - -obj-y := setup.o io.o irq.o - -obj-$(CONFIG_PCI) += pci.o - diff --git a/arch/sh/boards/renesas/hs7751rvoip/io.c b/arch/sh/boards/renesas/hs7751rvoip/io.c deleted file mode 100644 index bb9aa0d62852..000000000000 --- a/arch/sh/boards/renesas/hs7751rvoip/io.c +++ /dev/null @@ -1,283 +0,0 @@ -/* - * linux/arch/sh/boards/renesas/hs7751rvoip/io.c - * - * Copyright (C) 2001 Ian da Silva, Jeremy Siegel - * Based largely on io_se.c. - * - * I/O routine for Renesas Technology sales HS7751RVoIP - * - * Initial version only to support LAN access; some - * placeholder code from io_hs7751rvoip.c left in with the - * expectation of later SuperIO and PCMCIA access. - */ -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/module.h> -#include <linux/pci.h> -#include <asm/io.h> -#include <asm/hs7751rvoip.h> -#include <asm/addrspace.h> - -extern void *area6_io8_base; /* Area 6 8bit I/O Base address */ -extern void *area5_io16_base; /* Area 5 16bit I/O Base address */ - -/* - * The 7751R HS7751RVoIP uses the built-in PCI controller (PCIC) - * of the 7751R processor, and has a SuperIO accessible via the PCI. - * The board also includes a PCMCIA controller on its memory bus, - * like the other Solution Engine boards. - */ - -#define CODEC_IO_BASE 0x1000 -#define CODEC_IOMAP(a) ((unsigned long)area6_io8_base + ((a) - CODEC_IO_BASE)) - -static inline unsigned long port2adr(unsigned int port) -{ - if ((0x1f0 <= port && port < 0x1f8) || port == 0x3f6) - if (port == 0x3f6) - return ((unsigned long)area5_io16_base + 0x0c); - else - return ((unsigned long)area5_io16_base + 0x800 + - ((port-0x1f0) << 1)); - else - maybebadio((unsigned long)port); - return port; -} - -/* The 7751R HS7751RVoIP seems to have everything hooked */ -/* up pretty normally (nothing on high-bytes only...) so this */ -/* shouldn't be needed */ -static inline int shifted_port(unsigned long port) -{ - /* For IDE registers, value is not shifted */ - if ((0x1f0 <= port && port < 0x1f8) || port == 0x3f6) - return 0; - else - return 1; -} - -#if defined(CONFIG_HS7751RVOIP_CODEC) -#define codec_port(port) \ - ((CODEC_IO_BASE <= (port)) && ((port) < (CODEC_IO_BASE + 0x20))) -#else -#define codec_port(port) (0) -#endif - -/* - * General outline: remap really low stuff [eventually] to SuperIO, - * stuff in PCI IO space (at or above window at pci.h:PCIBIOS_MIN_IO) - * is mapped through the PCI IO window. Stuff with high bits (PXSEG) - * should be way beyond the window, and is used w/o translation for - * compatibility. - */ -unsigned char hs7751rvoip_inb(unsigned long port) -{ - if (PXSEG(port)) - return ctrl_inb(port); - else if (codec_port(port)) - return ctrl_inb(CODEC_IOMAP(port)); - else if (is_pci_ioaddr(port) || shifted_port(port)) - return ctrl_inb(pci_ioaddr(port)); - else - return ctrl_inw(port2adr(port)) & 0xff; -} - -unsigned char hs7751rvoip_inb_p(unsigned long port) -{ - unsigned char v; - - if (PXSEG(port)) - v = ctrl_inb(port); - else if (codec_port(port)) - v = ctrl_inb(CODEC_IOMAP(port)); - else if (is_pci_ioaddr(port) || shifted_port(port)) - v = ctrl_inb(pci_ioaddr(port)); - else - v = ctrl_inw(port2adr(port)) & 0xff; - ctrl_delay(); - return v; -} - -unsigned short hs7751rvoip_inw(unsigned long port) -{ - if (PXSEG(port)) - return ctrl_inw(port); - else if (is_pci_ioaddr(port) || shifted_port(port)) - return ctrl_inw(pci_ioaddr(port)); - else - maybebadio(port); - return 0; -} - -unsigned int hs7751rvoip_inl(unsigned long port) -{ - if (PXSEG(port)) - return ctrl_inl(port); - else if (is_pci_ioaddr(port) || shifted_port(port)) - return ctrl_inl(pci_ioaddr(port)); - else - maybebadio(port); - return 0; -} - -void hs7751rvoip_outb(unsigned char value, unsigned long port) -{ - - if (PXSEG(port)) - ctrl_outb(value, port); - else if (codec_port(port)) - ctrl_outb(value, CODEC_IOMAP(port)); - else if (is_pci_ioaddr(port) || shifted_port(port)) - ctrl_outb(value, pci_ioaddr(port)); - else - ctrl_outb(value, port2adr(port)); -} - -void hs7751rvoip_outb_p(unsigned char value, unsigned long port) -{ - if (PXSEG(port)) - ctrl_outb(value, port); - else if (codec_port(port)) - ctrl_outb(value, CODEC_IOMAP(port)); - else if (is_pci_ioaddr(port) || shifted_port(port)) - ctrl_outb(value, pci_ioaddr(port)); - else - ctrl_outw(value, port2adr(port)); - - ctrl_delay(); -} - -void hs7751rvoip_outw(unsigned short value, unsigned long port) -{ - if (PXSEG(port)) - ctrl_outw(value, port); - else if (is_pci_ioaddr(port) || shifted_port(port)) - ctrl_outw(value, pci_ioaddr(port)); - else - maybebadio(port); -} - -void hs7751rvoip_outl(unsigned int value, unsigned long port) -{ - if (PXSEG(port)) - ctrl_outl(value, port); - else if (is_pci_ioaddr(port) || shifted_port(port)) - ctrl_outl(value, pci_ioaddr(port)); - else - maybebadio(port); -} - -void hs7751rvoip_insb(unsigned long port, void *addr, unsigned long count) -{ - u8 *buf = addr; - - if (PXSEG(port)) - while (count--) - *buf++ = ctrl_inb(port); - else if (codec_port(port)) - while (count--) - *buf++ = ctrl_inb(CODEC_IOMAP(port)); - else if (is_pci_ioaddr(port) || shifted_port(port)) { - volatile u8 *bp = (volatile u8 *)pci_ioaddr(port); - - while (count--) - *buf++ = *bp; - } else { - volatile u16 *p = (volatile u16 *)port2adr(port); - - while (count--) - *buf++ = *p & 0xff; - } -} - -void hs7751rvoip_insw(unsigned long port, void *addr, unsigned long count) -{ - volatile u16 *p; - u16 *buf = addr; - - if (PXSEG(port)) - p = (volatile u16 *)port; - else if (is_pci_ioaddr(port) || shifted_port(port)) - p = (volatile u16 *)pci_ioaddr(port); - else - p = (volatile u16 *)port2adr(port); - while (count--) - *buf++ = *p; -} - -void hs7751rvoip_insl(unsigned long port, void *addr, unsigned long count) -{ - - if (is_pci_ioaddr(port) || shifted_port(port)) { - volatile u32 *p = (volatile u32 *)pci_ioaddr(port); - u32 *buf = addr; - - while (count--) - *buf++ = *p; - } else - maybebadio(port); -} - -void hs7751rvoip_outsb(unsigned long port, const void *addr, unsigned long count) -{ - const u8 *buf = addr; - - if (PXSEG(port)) - while (count--) - ctrl_outb(*buf++, port); - else if (codec_port(port)) - while (count--) - ctrl_outb(*buf++, CODEC_IOMAP(port)); - else if (is_pci_ioaddr(port) || shifted_port(port)) { - volatile u8 *bp = (volatile u8 *)pci_ioaddr(port); - - while (count--) - *bp = *buf++; - } else { - volatile u16 *p = (volatile u16 *)port2adr(port); - - while (count--) - *p = *buf++; - } -} - -void hs7751rvoip_outsw(unsigned long port, const void *addr, unsigned long count) -{ - volatile u16 *p; - const u16 *buf = addr; - - if (PXSEG(port)) - p = (volatile u16 *)port; - else if (is_pci_ioaddr(port) || shifted_port(port)) - p = (volatile u16 *)pci_ioaddr(port); - else - p = (volatile u16 *)port2adr(port); - - while (count--) - *p = *buf++; -} - -void hs7751rvoip_outsl(unsigned long port, const void *addr, unsigned long count) -{ - const u32 *buf = addr; - - if (is_pci_ioaddr(port) || shifted_port(port)) { - volatile u32 *p = (volatile u32 *)pci_ioaddr(port); - - while (count--) - *p = *buf++; - } else - maybebadio(port); -} - -void __iomem *hs7751rvoip_ioport_map(unsigned long port, unsigned int size) -{ - if (PXSEG(port)) - return (void __iomem *)port; - else if (unlikely(codec_port(port) && (size == 1))) - return (void __iomem *)CODEC_IOMAP(port); - else if (is_pci_ioaddr(port)) - return (void __iomem *)pci_ioaddr(port); - - return (void __iomem *)port2adr(port); -} diff --git a/arch/sh/boards/renesas/hs7751rvoip/irq.c b/arch/sh/boards/renesas/hs7751rvoip/irq.c deleted file mode 100644 index e55c6686b21f..000000000000 --- a/arch/sh/boards/renesas/hs7751rvoip/irq.c +++ /dev/null @@ -1,116 +0,0 @@ -/* - * linux/arch/sh/boards/renesas/hs7751rvoip/irq.c - * - * Copyright (C) 2000 Kazumoto Kojima - * - * Renesas Technology Sales HS7751RVoIP Support. - * - * Modified for HS7751RVoIP by - * Atom Create Engineering Co., Ltd. 2002. - * Lineo uSolutions, Inc. 2003. - */ - -#include <linux/init.h> -#include <linux/irq.h> -#include <linux/interrupt.h> -#include <asm/io.h> -#include <asm/irq.h> -#include <asm/hs7751rvoip.h> - -static int mask_pos[] = {8, 9, 10, 11, 12, 13, 0, 1, 2, 3, 4, 5, 6, 7}; - -static void enable_hs7751rvoip_irq(unsigned int irq); -static void disable_hs7751rvoip_irq(unsigned int irq); - -/* shutdown is same as "disable" */ -#define shutdown_hs7751rvoip_irq disable_hs7751rvoip_irq - -static void ack_hs7751rvoip_irq(unsigned int irq); -static void end_hs7751rvoip_irq(unsigned int irq); - -static unsigned int startup_hs7751rvoip_irq(unsigned int irq) -{ - enable_hs7751rvoip_irq(irq); - return 0; /* never anything pending */ -} - -static void disable_hs7751rvoip_irq(unsigned int irq) -{ - unsigned short val; - unsigned short mask = 0xffff ^ (0x0001 << mask_pos[irq]); - - /* Set the priority in IPR to 0 */ - val = ctrl_inw(IRLCNTR3); - val &= mask; - ctrl_outw(val, IRLCNTR3); -} - -static void enable_hs7751rvoip_irq(unsigned int irq) -{ - unsigned short val; - unsigned short value = (0x0001 << mask_pos[irq]); - - /* Set priority in IPR back to original value */ - val = ctrl_inw(IRLCNTR3); - val |= value; - ctrl_outw(val, IRLCNTR3); -} - -static void ack_hs7751rvoip_irq(unsigned int irq) -{ - disable_hs7751rvoip_irq(irq); -} - -static void end_hs7751rvoip_irq(unsigned int irq) -{ - if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) - enable_hs7751rvoip_irq(irq); -} - -static struct hw_interrupt_type hs7751rvoip_irq_type = { - .typename = "HS7751RVoIP IRQ", - .startup = startup_hs7751rvoip_irq, - .shutdown = shutdown_hs7751rvoip_irq, - .enable = enable_hs7751rvoip_irq, - .disable = disable_hs7751rvoip_irq, - .ack = ack_hs7751rvoip_irq, - .end = end_hs7751rvoip_irq, -}; - -static void make_hs7751rvoip_irq(unsigned int irq) -{ - disable_irq_nosync(irq); - irq_desc[irq].chip = &hs7751rvoip_irq_type; - disable_hs7751rvoip_irq(irq); -} - -/* - * Initialize IRQ setting - */ -void __init init_hs7751rvoip_IRQ(void) -{ - int i; - - /* IRL0=ON HOOK1 - * IRL1=OFF HOOK1 - * IRL2=ON HOOK2 - * IRL3=OFF HOOK2 - * IRL4=Ringing Detection - * IRL5=CODEC - * IRL6=Ethernet - * IRL7=Ethernet Hub - * IRL8=USB Communication - * IRL9=USB Connection - * IRL10=USB DMA - * IRL11=CF Card - * IRL12=PCMCIA - * IRL13=PCI Slot - */ - ctrl_outw(0x9876, IRLCNTR1); - ctrl_outw(0xdcba, IRLCNTR2); - ctrl_outw(0x0050, IRLCNTR4); - ctrl_outw(0x4321, IRLCNTR5); - - for (i=0; i<14; i++) - make_hs7751rvoip_irq(i); -} diff --git a/arch/sh/boards/renesas/hs7751rvoip/pci.c b/arch/sh/boards/renesas/hs7751rvoip/pci.c deleted file mode 100644 index 1c0ddee30d21..000000000000 --- a/arch/sh/boards/renesas/hs7751rvoip/pci.c +++ /dev/null @@ -1,149 +0,0 @@ -/* - * linux/arch/sh/boards/renesas/hs7751rvoip/pci.c - * - * Author: Ian DaSilva (idasilva@mvista.com) - * - * Highly leveraged from pci-bigsur.c, written by Dustin McIntire. - * - * May be copied or modified under the terms of the GNU General Public - * License. See linux/COPYING for more information. - * - * PCI initialization for the Renesas SH7751R HS7751RVoIP board - */ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/init.h> -#include <linux/delay.h> -#include <linux/pci.h> -#include <linux/module.h> - -#include <asm/io.h> -#include "../../../drivers/pci/pci-sh7751.h" -#include <asm/hs7751rvoip/hs7751rvoip.h> - -#define PCIMCR_MRSET_OFF 0xBFFFFFFF -#define PCIMCR_RFSH_OFF 0xFFFFFFFB - -/* - * Only long word accesses of the PCIC's internal local registers and the - * configuration registers from the CPU is supported. - */ -#define PCIC_WRITE(x,v) writel((v), PCI_REG(x)) -#define PCIC_READ(x) readl(PCI_REG(x)) - -/* - * Description: This function sets up and initializes the pcic, sets - * up the BARS, maps the DRAM into the address space etc, etc. - */ -int __init pcibios_init_platform(void) -{ - unsigned long bcr1, wcr1, wcr2, wcr3, mcr; - unsigned short bcr2, bcr3; - - /* - * Initialize the slave bus controller on the pcic. The values used - * here should not be hardcoded, but they should be taken from the bsc - * on the processor, to make this function as generic as possible. - * (i.e. Another sbc may usr different SDRAM timing settings -- in order - * for the pcic to work, its settings need to be exactly the same.) - */ - bcr1 = (*(volatile unsigned long *)(SH7751_BCR1)); - bcr2 = (*(volatile unsigned short *)(SH7751_BCR2)); - bcr3 = (*(volatile unsigned short *)(SH7751_BCR3)); - wcr1 = (*(volatile unsigned long *)(SH7751_WCR1)); - wcr2 = (*(volatile unsigned long *)(SH7751_WCR2)); - wcr3 = (*(volatile unsigned long *)(SH7751_WCR3)); - mcr = (*(volatile unsigned long *)(SH7751_MCR)); - - bcr1 = bcr1 | 0x00080000; /* Enable Bit 19, BREQEN */ - (*(volatile unsigned long *)(SH7751_BCR1)) = bcr1; - - bcr1 = bcr1 | 0x40080000; /* Enable Bit 19 BREQEN, set PCIC to slave */ - PCIC_WRITE(SH7751_PCIBCR1, bcr1); /* PCIC BCR1 */ - PCIC_WRITE(SH7751_PCIBCR2, bcr2); /* PCIC BCR2 */ - PCIC_WRITE(SH7751_PCIBCR3, bcr3); /* PCIC BCR3 */ - PCIC_WRITE(SH7751_PCIWCR1, wcr1); /* PCIC WCR1 */ - PCIC_WRITE(SH7751_PCIWCR2, wcr2); /* PCIC WCR2 */ - PCIC_WRITE(SH7751_PCIWCR3, wcr3); /* PCIC WCR3 */ - mcr = (mcr & PCIMCR_MRSET_OFF) & PCIMCR_RFSH_OFF; - PCIC_WRITE(SH7751_PCIMCR, mcr); /* PCIC MCR */ - - /* Enable all interrupts, so we know what to fix */ - PCIC_WRITE(SH7751_PCIINTM, 0x0000c3ff); - PCIC_WRITE(SH7751_PCIAINTM, 0x0000380f); - - /* Set up standard PCI config registers */ - PCIC_WRITE(SH7751_PCICONF1, 0xFB900047); /* Bus Master, Mem & I/O access */ - PCIC_WRITE(SH7751_PCICONF2, 0x00000000); /* PCI Class code & Revision ID */ - PCIC_WRITE(SH7751_PCICONF4, 0xab000001); /* PCI I/O address (local regs) */ - PCIC_WRITE(SH7751_PCICONF5, 0x0c000000); /* PCI MEM address (local RAM) */ - PCIC_WRITE(SH7751_PCICONF6, 0xd0000000); /* PCI MEM address (unused) */ - PCIC_WRITE(SH7751_PCICONF11, 0x35051054); /* PCI Subsystem ID & Vendor ID */ - PCIC_WRITE(SH7751_PCILSR0, 0x03f00000); /* MEM (full 64M exposed) */ - PCIC_WRITE(SH7751_PCILSR1, 0x00000000); /* MEM (unused) */ - PCIC_WRITE(SH7751_PCILAR0, 0x0c000000); /* MEM (direct map from PCI) */ - PCIC_WRITE(SH7751_PCILAR1, 0x00000000); /* MEM (unused) */ - - /* Now turn it on... */ - PCIC_WRITE(SH7751_PCICR, 0xa5000001); - - /* - * Set PCIMBR and PCIIOBR here, assuming a single window - * (16M MEM, 256K IO) is enough. If a larger space is - * needed, the readx/writex and inx/outx functions will - * have to do more (e.g. setting registers for each call). - */ - - /* - * Set the MBR so PCI address is one-to-one with window, - * meaning all calls go straight through... use ifdef to - * catch erroneous assumption. - */ - BUG_ON(PCIBIOS_MIN_MEM != SH7751_PCI_MEMORY_BASE); - - PCIC_WRITE(SH7751_PCIMBR, PCIBIOS_MIN_MEM); - - /* Set IOBR for window containing area specified in pci.h */ - PCIC_WRITE(SH7751_PCIIOBR, (PCIBIOS_MIN_IO & SH7751_PCIIOBR_MASK)); - - /* All done, may as well say so... */ - printk("SH7751R PCI: Finished initialization of the PCI controller\n"); - - return 1; -} - -int __init pcibios_map_platform_irq(u8 slot, u8 pin) -{ - switch (slot) { - case 0: return IRQ_PCISLOT; /* PCI Extend slot */ - case 1: return IRQ_PCMCIA; /* PCI Cardbus Bridge */ - case 2: return IRQ_PCIETH; /* Realtek Ethernet controller */ - case 3: return IRQ_PCIHUB; /* Realtek Ethernet Hub controller */ - default: - printk("PCI: Bad IRQ mapping request for slot %d\n", slot); - return -1; - } -} - -static struct resource sh7751_io_resource = { - .name = "SH7751_IO", - .start = 0x4000, - .end = 0x4000 + SH7751_PCI_IO_SIZE - 1, - .flags = IORESOURCE_IO -}; - -static struct resource sh7751_mem_resource = { - .name = "SH7751_mem", - .start = SH7751_PCI_MEMORY_BASE, - .end = SH7751_PCI_MEMORY_BASE + SH7751_PCI_MEM_SIZE - 1, - .flags = IORESOURCE_MEM -}; - -extern struct pci_ops sh7751_pci_ops; - -struct pci_channel board_pci_channels[] = { - { &sh7751_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff }, - { NULL, NULL, NULL, 0, 0 }, -}; -EXPORT_SYMBOL(board_pci_channels); diff --git a/arch/sh/boards/renesas/hs7751rvoip/setup.c b/arch/sh/boards/renesas/hs7751rvoip/setup.c deleted file mode 100644 index c05625975f2c..000000000000 --- a/arch/sh/boards/renesas/hs7751rvoip/setup.c +++ /dev/null @@ -1,105 +0,0 @@ -/* - * Renesas Technology Sales HS7751RVoIP Support. - * - * Copyright (C) 2000 Kazumoto Kojima - * - * Modified for HS7751RVoIP by - * Atom Create Engineering Co., Ltd. 2002. - * Lineo uSolutions, Inc. 2003. - */ -#include <linux/init.h> -#include <linux/irq.h> -#include <linux/mm.h> -#include <linux/pm.h> -#include <asm/hs7751rvoip.h> -#include <asm/io.h> -#include <asm/machvec.h> - -static void hs7751rvoip_power_off(void) -{ - ctrl_outw(ctrl_inw(PA_OUTPORTR) & 0xffdf, PA_OUTPORTR); -} - -void *area5_io8_base; -void *area6_io8_base; -void *area5_io16_base; -void *area6_io16_base; - -static int __init hs7751rvoip_cf_init(void) -{ - pgprot_t prot; - unsigned long paddrbase; - - /* open I/O area window */ - paddrbase = virt_to_phys((void *)(PA_AREA5_IO+0x00000800)); - prot = PAGE_KERNEL_PCC(1, _PAGE_PCC_COM16); - area5_io16_base = p3_ioremap(paddrbase, PAGE_SIZE, prot.pgprot); - if (!area5_io16_base) { - printk("allocate_cf_area : can't open CF I/O window!\n"); - return -ENOMEM; - } - - /* XXX : do we need attribute and common-memory area also? */ - - paddrbase = virt_to_phys((void *)PA_AREA6_IO); -#if defined(CONFIG_HS7751RVOIP_CODEC) - prot = PAGE_KERNEL_PCC(0, _PAGE_PCC_COM8); -#else - prot = PAGE_KERNEL_PCC(0, _PAGE_PCC_IO8); -#endif - area6_io8_base = p3_ioremap(paddrbase, PAGE_SIZE, prot.pgprot); - if (!area6_io8_base) { - printk("allocate_cf_area : can't open CODEC I/O 8bit window!\n"); - return -ENOMEM; - } - prot = PAGE_KERNEL_PCC(0, _PAGE_PCC_IO16); - area6_io16_base = p3_ioremap(paddrbase, PAGE_SIZE, prot.pgprot); - if (!area6_io16_base) { - printk("allocate_cf_area : can't open CODEC I/O 16bit window!\n"); - return -ENOMEM; - } - - return 0; -} -device_initcall(hs7751rvoip_cf_init); - -/* - * Initialize the board - */ -static void __init hs7751rvoip_setup(char **cmdline_p) -{ - ctrl_outb(0xf0, PA_OUTPORTR); - pm_power_off = hs7751rvoip_power_off; - - printk(KERN_INFO "Renesas Technology Sales HS7751RVoIP-2 support.\n"); -} - -static struct sh_machine_vector mv_hs7751rvoip __initmv = { - .mv_name = "HS7751RVoIP", - .mv_setup = hs7751rvoip_setup, - .mv_nr_irqs = 72, - - .mv_inb = hs7751rvoip_inb, - .mv_inw = hs7751rvoip_inw, - .mv_inl = hs7751rvoip_inl, - .mv_outb = hs7751rvoip_outb, - .mv_outw = hs7751rvoip_outw, - .mv_outl = hs7751rvoip_outl, - - .mv_inb_p = hs7751rvoip_inb_p, - .mv_inw_p = hs7751rvoip_inw, - .mv_inl_p = hs7751rvoip_inl, - .mv_outb_p = hs7751rvoip_outb_p, - .mv_outw_p = hs7751rvoip_outw, - .mv_outl_p = hs7751rvoip_outl, - - .mv_insb = hs7751rvoip_insb, - .mv_insw = hs7751rvoip_insw, - .mv_insl = hs7751rvoip_insl, - .mv_outsb = hs7751rvoip_outsb, - .mv_outsw = hs7751rvoip_outsw, - .mv_outsl = hs7751rvoip_outsl, - - .mv_init_irq = init_hs7751rvoip_IRQ, - .mv_ioport_map = hs7751rvoip_ioport_map, -}; diff --git a/arch/sh/boards/renesas/r7780rp/Makefile b/arch/sh/boards/renesas/r7780rp/Makefile index dd26182fbf58..20a10080b11f 100644 --- a/arch/sh/boards/renesas/r7780rp/Makefile +++ b/arch/sh/boards/renesas/r7780rp/Makefile @@ -3,7 +3,7 @@ # irqinit-$(CONFIG_SH_R7780MP) := irq-r7780mp.o irqinit-$(CONFIG_SH_R7785RP) := irq-r7785rp.o -irqinit-$(CONFIG_SH_R7780RP) := irq-r7780rp.o irq.o +irqinit-$(CONFIG_SH_R7780RP) := irq-r7780rp.o obj-y := setup.o $(irqinit-y) ifneq ($(CONFIG_SH_R7785RP),y) diff --git a/arch/sh/boards/renesas/r7780rp/irq-r7780mp.c b/arch/sh/boards/renesas/r7780rp/irq-r7780mp.c index 59b47fe061f9..1f8f073f27be 100644 --- a/arch/sh/boards/renesas/r7780rp/irq-r7780mp.c +++ b/arch/sh/boards/renesas/r7780rp/irq-r7780mp.c @@ -47,7 +47,7 @@ static unsigned char irl2irq[HL_NR_IRL] __initdata = { }; static DECLARE_INTC_DESC(intc_desc, "r7780mp", vectors, - NULL, NULL, mask_registers, NULL, NULL); + NULL, mask_registers, NULL, NULL); unsigned char * __init highlander_init_irq_r7780mp(void) { diff --git a/arch/sh/boards/renesas/r7780rp/irq-r7780rp.c b/arch/sh/boards/renesas/r7780rp/irq-r7780rp.c index fa4a534cade9..bd34048ed0e1 100644 --- a/arch/sh/boards/renesas/r7780rp/irq-r7780rp.c +++ b/arch/sh/boards/renesas/r7780rp/irq-r7780rp.c @@ -3,21 +3,65 @@ * * Copyright (C) 2002 Atom Create Engineering Co., Ltd. * Copyright (C) 2006 Paul Mundt + * Copyright (C) 2008 Magnus Damm * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive * for more details. */ #include <linux/init.h> +#include <linux/irq.h> #include <linux/io.h> #include <asm/r7780rp.h> +enum { + UNUSED = 0, + + /* board specific interrupt sources */ + + AX88796, /* Ethernet controller */ + PSW, /* Push Switch */ + CF, /* Compact Flash */ + + PCI_A, + PCI_B, + PCI_C, + PCI_D, +}; + +static struct intc_vect vectors[] __initdata = { + INTC_IRQ(PCI_A, 65), /* dirty: overwrite cpu vectors for pci */ + INTC_IRQ(PCI_B, 66), + INTC_IRQ(PCI_C, 67), + INTC_IRQ(PCI_D, 68), + INTC_IRQ(CF, IRQ_CF), + INTC_IRQ(PSW, IRQ_PSW), + INTC_IRQ(AX88796, IRQ_AX88796), +}; + +static struct intc_mask_reg mask_registers[] __initdata = { + { 0xa5000000, 0, 16, /* IRLMSK */ + { PCI_A, PCI_B, PCI_C, PCI_D, CF, 0, 0, 0, + 0, 0, 0, 0, 0, 0, PSW, AX88796 } }, +}; + +static unsigned char irl2irq[HL_NR_IRL] __initdata = { + 65, 66, 67, 68, + IRQ_CF, 0, 0, 0, + 0, 0, 0, 0, + IRQ_AX88796, IRQ_PSW +}; + +static DECLARE_INTC_DESC(intc_desc, "r7780rp", vectors, + NULL, mask_registers, NULL, NULL); + unsigned char * __init highlander_init_irq_r7780rp(void) { - int i; - - for (i = 0; i < 15; i++) - make_r7780rp_irq(i); + if (ctrl_inw(0xa5000600)) { + printk(KERN_INFO "Using r7780rp interrupt controller.\n"); + register_intc_controller(&intc_desc); + return irl2irq; + } return NULL; } diff --git a/arch/sh/boards/renesas/r7780rp/irq-r7785rp.c b/arch/sh/boards/renesas/r7780rp/irq-r7785rp.c index b2c6a84673bd..bf7ec107fbc6 100644 --- a/arch/sh/boards/renesas/r7780rp/irq-r7785rp.c +++ b/arch/sh/boards/renesas/r7780rp/irq-r7785rp.c @@ -2,7 +2,7 @@ * Renesas Solutions Highlander R7785RP Support. * * Copyright (C) 2002 Atom Create Engineering Co., Ltd. - * Copyright (C) 2006 Paul Mundt + * Copyright (C) 2006 - 2008 Paul Mundt * Copyright (C) 2007 Magnus Damm * * This file is subject to the terms and conditions of the GNU General Public @@ -17,31 +17,52 @@ enum { UNUSED = 0, - /* board specific interrupt sources */ - AX88796, /* Ethernet controller */ - CF, /* Compact Flash */ + /* FPGA specific interrupt sources */ + CF, /* Compact Flash */ + SMBUS, /* SMBUS */ + TP, /* Touch panel */ + RTC, /* RTC Alarm */ + TH_ALERT, /* Temperature sensor */ + AX88796, /* Ethernet controller */ + + /* external bus connector */ + EXT0, EXT1, EXT2, EXT3, EXT4, EXT5, EXT6, EXT7, }; static struct intc_vect vectors[] __initdata = { INTC_IRQ(CF, IRQ_CF), + INTC_IRQ(SMBUS, IRQ_SMBUS), + INTC_IRQ(TP, IRQ_TP), + INTC_IRQ(RTC, IRQ_RTC), + INTC_IRQ(TH_ALERT, IRQ_TH_ALERT), + + INTC_IRQ(EXT0, IRQ_EXT0), INTC_IRQ(EXT1, IRQ_EXT1), + INTC_IRQ(EXT2, IRQ_EXT2), INTC_IRQ(EXT3, IRQ_EXT3), + + INTC_IRQ(EXT4, IRQ_EXT4), INTC_IRQ(EXT5, IRQ_EXT5), + INTC_IRQ(EXT6, IRQ_EXT6), INTC_IRQ(EXT7, IRQ_EXT7), + INTC_IRQ(AX88796, IRQ_AX88796), }; static struct intc_mask_reg mask_registers[] __initdata = { { 0xa4000010, 0, 16, /* IRLMCR1 */ - { 0, 0, 0, 0, CF, AX88796, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0 } }, + { 0, 0, 0, 0, CF, AX88796, SMBUS, TP, + RTC, 0, TH_ALERT, 0, 0, 0, 0, 0 } }, + { 0xa4000012, 0, 16, /* IRLMCR2 */ + { 0, 0, 0, 0, 0, 0, 0, 0, + EXT7, EXT6, EXT5, EXT4, EXT3, EXT2, EXT1, EXT0 } }, }; static unsigned char irl2irq[HL_NR_IRL] __initdata = { - 0, IRQ_CF, 0, 0, - 0, 0, 0, 0, - 0, 0, IRQ_AX88796, 0, - 0, 0, 0, + 0, IRQ_CF, IRQ_EXT4, IRQ_EXT5, + IRQ_EXT6, IRQ_EXT7, IRQ_SMBUS, IRQ_TP, + IRQ_RTC, IRQ_TH_ALERT, IRQ_AX88796, IRQ_EXT0, + IRQ_EXT1, IRQ_EXT2, IRQ_EXT3, }; static DECLARE_INTC_DESC(intc_desc, "r7785rp", vectors, - NULL, NULL, mask_registers, NULL, NULL); + NULL, mask_registers, NULL, NULL); unsigned char * __init highlander_init_irq_r7785rp(void) { @@ -58,7 +79,7 @@ unsigned char * __init highlander_init_irq_r7785rp(void) ctrl_outw(0x7060, PA_IRLPRC); /* FPGA IRLC */ ctrl_outw(0x0000, PA_IRLPRD); /* FPGA IRLD */ ctrl_outw(0x4321, PA_IRLPRE); /* FPGA IRLE */ - ctrl_outw(0x0000, PA_IRLPRF); /* FPGA IRLF */ + ctrl_outw(0xdcba, PA_IRLPRF); /* FPGA IRLF */ register_intc_controller(&intc_desc); return irl2irq; diff --git a/arch/sh/boards/renesas/r7780rp/irq.c b/arch/sh/boards/renesas/r7780rp/irq.c deleted file mode 100644 index e0b8eb52f376..000000000000 --- a/arch/sh/boards/renesas/r7780rp/irq.c +++ /dev/null @@ -1,51 +0,0 @@ -/* - * Renesas Solutions Highlander R7780RP-1 Support. - * - * Copyright (C) 2002 Atom Create Engineering Co., Ltd. - * Copyright (C) 2006 Paul Mundt - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#include <linux/init.h> -#include <linux/irq.h> -#include <linux/interrupt.h> -#include <linux/io.h> -#include <asm/r7780rp.h> - -#ifdef CONFIG_SH_R7780RP -static int mask_pos[] = {15, 14, 13, 12, 11, 10, 9, 8, 7, 5, 6, 4, 0, 1, 2, 0}; -#elif defined(CONFIG_SH_R7780MP) -static int mask_pos[] = {12, 11, 9, 14, 15, 8, 13, 6, 5, 4, 3, 2, 0, 0, 1, 0}; -#elif defined(CONFIG_SH_R7785RP) -static int mask_pos[] = {2, 11, 2, 2, 2, 2, 9, 8, 7, 5, 10, 2, 2, 2, 2, 2}; -#endif - -static void enable_r7780rp_irq(unsigned int irq) -{ - /* Set priority in IPR back to original value */ - ctrl_outw(ctrl_inw(IRLCNTR1) | (1 << mask_pos[irq]), IRLCNTR1); -} - -static void disable_r7780rp_irq(unsigned int irq) -{ - /* Set the priority in IPR to 0 */ - ctrl_outw(ctrl_inw(IRLCNTR1) & (0xffff ^ (1 << mask_pos[irq])), - IRLCNTR1); -} - -static struct irq_chip r7780rp_irq_chip __read_mostly = { - .name = "R7780RP", - .mask = disable_r7780rp_irq, - .unmask = enable_r7780rp_irq, - .mask_ack = disable_r7780rp_irq, -}; - -void make_r7780rp_irq(unsigned int irq) -{ - disable_irq_nosync(irq); - set_irq_chip_and_handler_name(irq, &r7780rp_irq_chip, - handle_level_irq, "level"); - enable_r7780rp_irq(irq); -} diff --git a/arch/sh/boards/renesas/r7780rp/setup.c b/arch/sh/boards/renesas/r7780rp/setup.c index 0fdc0bc19145..a43b47726f54 100644 --- a/arch/sh/boards/renesas/r7780rp/setup.c +++ b/arch/sh/boards/renesas/r7780rp/setup.c @@ -179,9 +179,11 @@ static struct platform_device ax88796_device = { static struct platform_device *r7780rp_devices[] __initdata = { &r8a66597_usb_host_device, &m66592_usb_peripheral_device, - &cf_ide_device, &heartbeat_device, +#ifndef CONFIG_SH_R7780RP + &cf_ide_device, &ax88796_device, +#endif }; static int __init r7780rp_devices_setup(void) @@ -316,9 +318,9 @@ void __init highlander_init_irq(void) break; #endif #ifdef CONFIG_SH_R7780RP - highlander_init_irq_r7780rp(); - ucp = irl2irq; - break; + ucp = highlander_init_irq_r7780rp(); + if (ucp) + break; #endif } while (0); diff --git a/arch/sh/boards/renesas/rts7751r2d/irq.c b/arch/sh/boards/renesas/rts7751r2d/irq.c index 7cc2813adfe4..8e49f6e51247 100644 --- a/arch/sh/boards/renesas/rts7751r2d/irq.c +++ b/arch/sh/boards/renesas/rts7751r2d/irq.c @@ -13,7 +13,6 @@ #include <linux/irq.h> #include <linux/interrupt.h> #include <linux/io.h> -#include <asm/voyagergx.h> #include <asm/rts7751r2d.h> #define R2D_NR_IRL 13 @@ -71,7 +70,7 @@ static unsigned char irl2irq_r2d_1[R2D_NR_IRL] __initdata = { }; static DECLARE_INTC_DESC(intc_desc_r2d_1, "r2d-1", vectors_r2d_1, - NULL, NULL, mask_registers_r2d_1, NULL, NULL); + NULL, mask_registers_r2d_1, NULL, NULL); #endif /* CONFIG_RTS7751R2D_1 */ @@ -109,7 +108,7 @@ static unsigned char irl2irq_r2d_plus[R2D_NR_IRL] __initdata = { }; static DECLARE_INTC_DESC(intc_desc_r2d_plus, "r2d-plus", vectors_r2d_plus, - NULL, NULL, mask_registers_r2d_plus, NULL, NULL); + NULL, mask_registers_r2d_plus, NULL, NULL); #endif /* CONFIG_RTS7751R2D_PLUS */ @@ -153,7 +152,4 @@ void __init init_rts7751r2d_IRQ(void) } register_intc_controller(d); -#ifdef CONFIG_MFD_SM501 - setup_voyagergx_irq(); -#endif } diff --git a/arch/sh/boards/renesas/rts7751r2d/setup.c b/arch/sh/boards/renesas/rts7751r2d/setup.c index 8125d20fdbd8..3452b072adde 100644 --- a/arch/sh/boards/renesas/rts7751r2d/setup.c +++ b/arch/sh/boards/renesas/rts7751r2d/setup.c @@ -13,34 +13,15 @@ #include <linux/pata_platform.h> #include <linux/serial_8250.h> #include <linux/sm501.h> +#include <linux/sm501-regs.h> #include <linux/pm.h> +#include <linux/fb.h> +#include <linux/spi/spi.h> +#include <linux/spi/spi_bitbang.h> #include <asm/machvec.h> #include <asm/rts7751r2d.h> -#include <asm/voyagergx.h> #include <asm/io.h> - -static void __init voyagergx_serial_init(void) -{ - unsigned long val; - - /* - * GPIO Control - */ - val = readl((void __iomem *)GPIO_MUX_HIGH); - val |= 0x00001fe0; - writel(val, (void __iomem *)GPIO_MUX_HIGH); - - /* - * Power Mode Gate - */ - val = readl((void __iomem *)POWER_MODE0_GATE); - val |= (POWER_MODE0_GATE_U0 | POWER_MODE0_GATE_U1); - writel(val, (void __iomem *)POWER_MODE0_GATE); - - val = readl((void __iomem *)POWER_MODE1_GATE); - val |= (POWER_MODE1_GATE_U0 | POWER_MODE1_GATE_U1); - writel(val, (void __iomem *)POWER_MODE1_GATE); -} +#include <asm/spi.h> static struct resource cf_ide_resources[] = { [0] = { @@ -75,6 +56,43 @@ static struct platform_device cf_ide_device = { }, }; +static struct spi_board_info spi_bus[] = { + { + .modalias = "rtc-r9701", + .max_speed_hz = 1000000, + .mode = SPI_MODE_3, + }, +}; + +static void r2d_chip_select(struct sh_spi_info *spi, int cs, int state) +{ + BUG_ON(cs != 0); /* Single Epson RTC-9701JE attached on CS0 */ + ctrl_outw(state == BITBANG_CS_ACTIVE, PA_RTCCE); +} + +static struct sh_spi_info spi_info = { + .num_chipselect = 1, + .chip_select = r2d_chip_select, +}; + +static struct resource spi_sh_sci_resources[] = { + { + .start = 0xffe00000, + .end = 0xffe0001f, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device spi_sh_sci_device = { + .name = "spi_sh_sci", + .id = -1, + .num_resources = ARRAY_SIZE(spi_sh_sci_resources), + .resource = spi_sh_sci_resources, + .dev = { + .platform_data = &spi_info, + }, +}; + static struct resource heartbeat_resources[] = { [0] = { .start = PA_OUTPORT, @@ -93,11 +111,11 @@ static struct platform_device heartbeat_device = { #ifdef CONFIG_MFD_SM501 static struct plat_serial8250_port uart_platform_data[] = { { - .membase = (void __iomem *)VOYAGER_UART_BASE, - .mapbase = VOYAGER_UART_BASE, + .membase = (void __iomem *)0xb3e30000, + .mapbase = 0xb3e30000, .iotype = UPIO_MEM, - .irq = IRQ_SM501_U0, - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, + .irq = IRQ_VOYAGER, + .flags = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ, .regshift = 2, .uartclk = (9600 * 16), }, @@ -124,14 +142,67 @@ static struct resource sm501_resources[] = { .flags = IORESOURCE_MEM, }, [2] = { - .start = IRQ_SM501_CV, + .start = IRQ_VOYAGER, .flags = IORESOURCE_IRQ, }, }; +static struct fb_videomode sm501_default_mode = { + .pixclock = 35714, + .xres = 640, + .yres = 480, + .left_margin = 105, + .right_margin = 50, + .upper_margin = 35, + .lower_margin = 0, + .hsync_len = 96, + .vsync_len = 2, + .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, +}; + +static struct sm501_platdata_fbsub sm501_pdata_fbsub_pnl = { + .def_bpp = 16, + .def_mode = &sm501_default_mode, + .flags = SM501FB_FLAG_USE_INIT_MODE | + SM501FB_FLAG_USE_HWCURSOR | + SM501FB_FLAG_USE_HWACCEL | + SM501FB_FLAG_DISABLE_AT_EXIT, +}; + +static struct sm501_platdata_fbsub sm501_pdata_fbsub_crt = { + .flags = (SM501FB_FLAG_USE_INIT_MODE | + SM501FB_FLAG_USE_HWCURSOR | + SM501FB_FLAG_USE_HWACCEL | + SM501FB_FLAG_DISABLE_AT_EXIT), + +}; + +static struct sm501_platdata_fb sm501_fb_pdata = { + .fb_route = SM501_FB_OWN, + .fb_crt = &sm501_pdata_fbsub_crt, + .fb_pnl = &sm501_pdata_fbsub_pnl, + .flags = SM501_FBPD_SWAP_FB_ENDIAN, +}; + +static struct sm501_initdata sm501_initdata = { + .gpio_high = { + .set = 0x00001fe0, + .mask = 0x0, + }, + .devices = SM501_USE_USB_HOST, +}; + +static struct sm501_platdata sm501_platform_data = { + .init = &sm501_initdata, + .fb = &sm501_fb_pdata, +}; + static struct platform_device sm501_device = { .name = "sm501", .id = -1, + .dev = { + .platform_data = &sm501_platform_data, + }, .num_resources = ARRAY_SIZE(sm501_resources), .resource = sm501_resources, }; @@ -145,10 +216,12 @@ static struct platform_device *rts7751r2d_devices[] __initdata = { #endif &cf_ide_device, &heartbeat_device, + &spi_sh_sci_device, }; static int __init rts7751r2d_devices_setup(void) { + spi_register_board_info(spi_bus, ARRAY_SIZE(spi_bus)); return platform_add_devices(rts7751r2d_devices, ARRAY_SIZE(rts7751r2d_devices)); } @@ -192,6 +265,7 @@ u8 rts7751r2d_readb(void __iomem *addr) */ static void __init rts7751r2d_setup(char **cmdline_p) { + void __iomem *sm501_reg; u16 ver = ctrl_inw(PA_VERREG); printk(KERN_INFO "Renesas Technology Sales RTS7751R2D support.\n"); @@ -202,7 +276,30 @@ static void __init rts7751r2d_setup(char **cmdline_p) ctrl_outw(0x0000, PA_OUTPORT); pm_power_off = rts7751r2d_power_off; - voyagergx_serial_init(); + /* sm501 dram configuration: + * ColSizeX = 11 - External Memory Column Size: 256 words. + * APX = 1 - External Memory Active to Pre-Charge Delay: 7 clocks. + * RstX = 1 - External Memory Reset: Normal. + * Rfsh = 1 - Local Memory Refresh to Command Delay: 12 clocks. + * BwC = 1 - Local Memory Block Write Cycle Time: 2 clocks. + * BwP = 1 - Local Memory Block Write to Pre-Charge Delay: 1 clock. + * AP = 1 - Internal Memory Active to Pre-Charge Delay: 7 clocks. + * Rst = 1 - Internal Memory Reset: Normal. + * RA = 1 - Internal Memory Remain in Active State: Do not remain. + */ + + sm501_reg = (void __iomem *)0xb3e00000 + SM501_DRAM_CONTROL; + writel(readl(sm501_reg) | 0x00f107c0, sm501_reg); + + /* + * Power Mode Gate - Enable UART0 + */ + + sm501_reg = (void __iomem *)0xb3e00000 + SM501_POWER_MODE_0_GATE; + writel(readl(sm501_reg) | (1 << SM501_GATE_UART0), sm501_reg); + + sm501_reg = (void __iomem *)0xb3e00000 + SM501_POWER_MODE_1_GATE; + writel(readl(sm501_reg) | (1 << SM501_GATE_UART0), sm501_reg); } /* @@ -215,8 +312,4 @@ static struct sh_machine_vector mv_rts7751r2d __initmv = { .mv_irq_demux = rts7751r2d_irq_demux, .mv_writeb = rts7751r2d_writeb, .mv_readb = rts7751r2d_readb, -#if defined(CONFIG_MFD_SM501) && defined(CONFIG_USB_OHCI_HCD) - .mv_consistent_alloc = voyagergx_consistent_alloc, - .mv_consistent_free = voyagergx_consistent_free, -#endif }; diff --git a/arch/sh/boards/renesas/sdk7780/Kconfig b/arch/sh/boards/renesas/sdk7780/Kconfig new file mode 100644 index 000000000000..e4f5b6985be1 --- /dev/null +++ b/arch/sh/boards/renesas/sdk7780/Kconfig @@ -0,0 +1,23 @@ +if SH_SDK7780 + +choice + prompt "SDK7780 options" + default SH_SDK7780_BASE + +config SH_SDK7780_STANDALONE + bool "SDK7780 board support" + depends on CPU_SUBTYPE_SH7780 + help + Selecting this option will enable support for the + standalone version of the SDK7780. If in doubt, say Y. + +config SH_SDK7780_BASE + bool "SDK7780 with base-board support" + depends on CPU_SUBTYPE_SH7780 + help + Selecting this option will enable support for the expansion + baseboard devices. If in doubt, say Y. + +endchoice + +endif diff --git a/arch/sh/boards/renesas/sdk7780/Makefile b/arch/sh/boards/renesas/sdk7780/Makefile new file mode 100644 index 000000000000..3d8f0befc35d --- /dev/null +++ b/arch/sh/boards/renesas/sdk7780/Makefile @@ -0,0 +1,5 @@ +# +# Makefile for the SDK7780 specific parts of the kernel +# +obj-y := setup.o irq.o + diff --git a/arch/sh/boards/renesas/sdk7780/irq.c b/arch/sh/boards/renesas/sdk7780/irq.c new file mode 100644 index 000000000000..87cdc578f6ff --- /dev/null +++ b/arch/sh/boards/renesas/sdk7780/irq.c @@ -0,0 +1,46 @@ +/* + * linux/arch/sh/boards/renesas/sdk7780/irq.c + * + * Renesas Technology Europe SDK7780 Support. + * + * Copyright (C) 2008 Nicholas Beck <nbeck@mpc-data.co.uk> + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/init.h> +#include <linux/irq.h> +#include <linux/io.h> +#include <asm/sdk7780.h> + +enum { + UNUSED = 0, + /* board specific interrupt sources */ + SMC91C111, /* Ethernet controller */ +}; + +static struct intc_vect fpga_vectors[] __initdata = { + INTC_IRQ(SMC91C111, IRQ_ETHERNET), +}; + +static struct intc_mask_reg fpga_mask_registers[] __initdata = { + { 0, FPGA_IRQ0MR, 16, + { 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, SMC91C111, 0, 0, 0, 0 } }, +}; + +static DECLARE_INTC_DESC(fpga_intc_desc, "sdk7780-irq", fpga_vectors, + NULL, fpga_mask_registers, NULL, NULL); + +void __init init_sdk7780_IRQ(void) +{ + printk(KERN_INFO "Using SDK7780 interrupt controller.\n"); + + ctrl_outw(0xFFFF, FPGA_IRQ0MR); + /* Setup IRL 0-3 */ + ctrl_outw(0x0003, FPGA_IMSR); + plat_irq_setup_pins(IRQ_MODE_IRL3210); + + register_intc_controller(&fpga_intc_desc); +} diff --git a/arch/sh/boards/renesas/sdk7780/setup.c b/arch/sh/boards/renesas/sdk7780/setup.c new file mode 100644 index 000000000000..5df32f201870 --- /dev/null +++ b/arch/sh/boards/renesas/sdk7780/setup.c @@ -0,0 +1,109 @@ +/* + * arch/sh/boards/renesas/sdk7780/setup.c + * + * Renesas Solutions SH7780 SDK Support + * Copyright (C) 2008 Nicholas Beck <nbeck@mpc-data.co.uk> + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/init.h> +#include <linux/types.h> +#include <linux/platform_device.h> +#include <linux/pata_platform.h> +#include <asm/machvec.h> +#include <asm/sdk7780.h> +#include <asm/heartbeat.h> +#include <asm/io.h> +#include <asm/addrspace.h> + +#define GPIO_PECR 0xFFEA0008 + +//* Heartbeat */ +static struct heartbeat_data heartbeat_data = { + .regsize = 16, +}; + +static struct resource heartbeat_resources[] = { + [0] = { + .start = PA_LED, + .end = PA_LED, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device heartbeat_device = { + .name = "heartbeat", + .id = -1, + .dev = { + .platform_data = &heartbeat_data, + }, + .num_resources = ARRAY_SIZE(heartbeat_resources), + .resource = heartbeat_resources, +}; + +/* SMC91x */ +static struct resource smc91x_eth_resources[] = { + [0] = { + .name = "smc91x-regs" , + .start = PA_LAN + 0x300, + .end = PA_LAN + 0x300 + 0x10 , + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_ETHERNET, + .end = IRQ_ETHERNET, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device smc91x_eth_device = { + .name = "smc91x", + .id = 0, + .dev = { + .dma_mask = NULL, /* don't use dma */ + .coherent_dma_mask = 0xffffffff, + }, + .num_resources = ARRAY_SIZE(smc91x_eth_resources), + .resource = smc91x_eth_resources, +}; + +static struct platform_device *sdk7780_devices[] __initdata = { + &heartbeat_device, + &smc91x_eth_device, +}; + +static int __init sdk7780_devices_setup(void) +{ + return platform_add_devices(sdk7780_devices, + ARRAY_SIZE(sdk7780_devices)); +} +device_initcall(sdk7780_devices_setup); + +static void __init sdk7780_setup(char **cmdline_p) +{ + u16 ver = ctrl_inw(FPGA_FPVERR); + u16 dateStamp = ctrl_inw(FPGA_FPDATER); + + printk(KERN_INFO "Renesas Technology Europe SDK7780 support.\n"); + printk(KERN_INFO "Board version: %d (revision %d), " + "FPGA version: %d (revision %d), datestamp : %d\n", + (ver >> 12) & 0xf, (ver >> 8) & 0xf, + (ver >> 4) & 0xf, ver & 0xf, + dateStamp); + + /* Setup pin mux'ing for PCIC */ + ctrl_outw(0x0000, GPIO_PECR); +} + +/* + * The Machine Vector + */ +static struct sh_machine_vector mv_se7780 __initmv = { + .mv_name = "Renesas SDK7780-R3" , + .mv_setup = sdk7780_setup, + .mv_nr_irqs = 111, + .mv_init_irq = init_sdk7780_IRQ, +}; + diff --git a/arch/sh/boot/Makefile b/arch/sh/boot/Makefile index 1b0f5be01d10..59f552c13349 100644 --- a/arch/sh/boot/Makefile +++ b/arch/sh/boot/Makefile @@ -35,17 +35,28 @@ $(obj)/compressed/vmlinux: FORCE KERNEL_LOAD := $(shell /bin/bash -c 'printf "0x%8x" \ $$[$(CONFIG_PAGE_OFFSET) + \ $(CONFIG_MEMORY_START) + \ + $(CONFIG_ZERO_PAGE_OFFSET)]') + +KERNEL_ENTRY := $(shell /bin/bash -c 'printf "0x%8x" \ + $$[$(CONFIG_PAGE_OFFSET) + \ + $(CONFIG_MEMORY_START) + \ $(CONFIG_ZERO_PAGE_OFFSET)+0x1000]') quiet_cmd_uimage = UIMAGE $@ cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A sh -O linux -T kernel \ - -C none -a $(KERNEL_LOAD) -e $(KERNEL_LOAD) \ + -C none -a $(KERNEL_LOAD) -e $(KERNEL_ENTRY) \ -n 'Linux-$(KERNELRELEASE)' -d $< $@ -$(obj)/uImage: $(obj)/zImage FORCE +$(obj)/uImage: $(obj)/vmlinux.bin.gz FORCE $(call if_changed,uimage) @echo ' Image $@ is ready' +$(obj)/vmlinux.bin: vmlinux FORCE + $(call if_changed,objcopy) + +$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE + $(call if_changed,gzip) + OBJCOPYFLAGS_vmlinux.srec := -I binary -O srec $(obj)/vmlinux.srec: $(obj)/compressed/vmlinux $(call if_changed,objcopy) @@ -54,4 +65,5 @@ OBJCOPYFLAGS_uImage.srec := -I binary -O srec $(obj)/uImage.srec: $(obj)/uImage $(call if_changed,objcopy) -clean-files += uImage uImage.srec vmlinux.srec +clean-files += uImage uImage.srec vmlinux.srec \ + vmlinux.bin vmlinux.bin.gz diff --git a/arch/sh/boot/compressed/Makefile b/arch/sh/boot/compressed/Makefile index 906a13f82fe0..efb01dc3c8c3 100644 --- a/arch/sh/boot/compressed/Makefile +++ b/arch/sh/boot/compressed/Makefile @@ -1,43 +1,5 @@ -# -# linux/arch/sh/boot/compressed/Makefile -# -# create a compressed vmlinux image from the original vmlinux -# - -targets := vmlinux vmlinux.bin vmlinux.bin.gz head.o misc.o piggy.o -EXTRA_AFLAGS := -traditional - -OBJECTS = $(obj)/head.o $(obj)/misc.o - -ifdef CONFIG_SH_STANDARD_BIOS -OBJECTS += $(obj)/../../kernel/sh_bios.o +ifeq ($(CONFIG_SUPERH32),y) +include ${srctree}/arch/sh/boot/compressed/Makefile_32 +else +include ${srctree}/arch/sh/boot/compressed/Makefile_64 endif - -# -# IMAGE_OFFSET is the load offset of the compression loader -# -IMAGE_OFFSET := $(shell /bin/bash -c 'printf "0x%08x" \ - $$[$(CONFIG_PAGE_OFFSET) + \ - $(CONFIG_MEMORY_START) + \ - $(CONFIG_BOOT_LINK_OFFSET)]') - -LIBGCC := $(shell $(CC) $(KBUILD_CFLAGS) -print-libgcc-file-name) - -LDFLAGS_vmlinux := -Ttext $(IMAGE_OFFSET) -e startup -T $(obj)/../../kernel/vmlinux.lds - - -$(obj)/vmlinux: $(OBJECTS) $(obj)/piggy.o $(LIBGCC) FORCE - $(call if_changed,ld) - @: - -$(obj)/vmlinux.bin: vmlinux FORCE - $(call if_changed,objcopy) - -$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE - $(call if_changed,gzip) - -LDFLAGS_piggy.o := -r --format binary --oformat elf32-sh-linux -T -OBJCOPYFLAGS += -R .empty_zero_page - -$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.gz FORCE - $(call if_changed,ld) diff --git a/arch/sh/boot/compressed/Makefile_32 b/arch/sh/boot/compressed/Makefile_32 new file mode 100644 index 000000000000..6ac8d4a4ed1d --- /dev/null +++ b/arch/sh/boot/compressed/Makefile_32 @@ -0,0 +1,43 @@ +# +# linux/arch/sh/boot/compressed/Makefile +# +# create a compressed vmlinux image from the original vmlinux +# + +targets := vmlinux vmlinux.bin vmlinux.bin.gz \ + head_32.o misc_32.o piggy.o +EXTRA_AFLAGS := -traditional + +OBJECTS = $(obj)/head_32.o $(obj)/misc_32.o + +ifdef CONFIG_SH_STANDARD_BIOS +OBJECTS += $(obj)/../../kernel/sh_bios.o +endif + +# +# IMAGE_OFFSET is the load offset of the compression loader +# +IMAGE_OFFSET := $(shell /bin/bash -c 'printf "0x%08x" \ + $$[$(CONFIG_PAGE_OFFSET) + \ + $(CONFIG_MEMORY_START) + \ + $(CONFIG_BOOT_LINK_OFFSET)]') + +LIBGCC := $(shell $(CC) $(KBUILD_CFLAGS) -print-libgcc-file-name) + +LDFLAGS_vmlinux := -Ttext $(IMAGE_OFFSET) -e startup -T $(obj)/../../kernel/vmlinux.lds + +$(obj)/vmlinux: $(OBJECTS) $(obj)/piggy.o $(LIBGCC) FORCE + $(call if_changed,ld) + @: + +$(obj)/vmlinux.bin: vmlinux FORCE + $(call if_changed,objcopy) + +$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE + $(call if_changed,gzip) + +LDFLAGS_piggy.o := -r --format binary --oformat elf32-sh-linux -T +OBJCOPYFLAGS += -R .empty_zero_page + +$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.gz FORCE + $(call if_changed,ld) diff --git a/arch/sh/boot/compressed/Makefile_64 b/arch/sh/boot/compressed/Makefile_64 new file mode 100644 index 000000000000..4334f2b86d8f --- /dev/null +++ b/arch/sh/boot/compressed/Makefile_64 @@ -0,0 +1,45 @@ +# +# arch/sh/boot/compressed/Makefile_64 +# +# create a compressed vmlinux image from the original vmlinux +# +# Copyright (C) 2002 Stuart Menefy +# Copyright (C) 2004 Paul Mundt +# +# This file is subject to the terms and conditions of the GNU General Public +# License. See the file "COPYING" in the main directory of this archive +# for more details. +# + +targets := vmlinux vmlinux.bin vmlinux.bin.gz \ + head_64.o misc_64.o cache.o piggy.o +EXTRA_AFLAGS := -traditional + +OBJECTS := $(obj)/vmlinux_64.lds $(obj)/head_64.o $(obj)/misc_64.o \ + $(obj)/cache.o + +# +# ZIMAGE_OFFSET is the load offset of the compression loader +# (4M for the kernel plus 64K for this loader) +# +ZIMAGE_OFFSET := $(shell /bin/bash -c 'printf "0x%08x" \ + $$[$(CONFIG_PAGE_OFFSET)+0x400000+0x10000]') + +LDFLAGS_vmlinux := -Ttext $(ZIMAGE_OFFSET) -e startup \ + -T $(obj)/../../kernel/vmlinux.lds + +$(obj)/vmlinux: $(OBJECTS) $(obj)/piggy.o FORCE + $(call if_changed,ld) + @: + +$(obj)/vmlinux.bin: vmlinux FORCE + $(call if_changed,objcopy) + +$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE + $(call if_changed,gzip) + +LDFLAGS_piggy.o := -r --format binary --oformat elf32-sh64-linux -T +OBJCOPYFLAGS += -R .empty_zero_page + +$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.gz FORCE + $(call if_changed,ld) diff --git a/arch/sh/boot/compressed/cache.c b/arch/sh/boot/compressed/cache.c new file mode 100644 index 000000000000..e27fc74f228c --- /dev/null +++ b/arch/sh/boot/compressed/cache.c @@ -0,0 +1,12 @@ +int cache_control(unsigned int command) +{ + volatile unsigned int *p = (volatile unsigned int *) 0x80000000; + int i; + + for (i = 0; i < (32 * 1024); i += 32) { + (void)*p; + p += (32 / sizeof (int)); + } + + return 0; +} diff --git a/arch/sh/boot/compressed/head.S b/arch/sh/boot/compressed/head_32.S index a8399b013729..a8399b013729 100644 --- a/arch/sh/boot/compressed/head.S +++ b/arch/sh/boot/compressed/head_32.S diff --git a/arch/sh/boot/compressed/head_64.S b/arch/sh/boot/compressed/head_64.S new file mode 100644 index 000000000000..1d4ecbfc767c --- /dev/null +++ b/arch/sh/boot/compressed/head_64.S @@ -0,0 +1,163 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * arch/shmedia/boot/compressed/head.S + * + * Copied from + * arch/shmedia/kernel/head.S + * which carried the copyright: + * Copyright (C) 2000, 2001 Paolo Alberelli + * + * Modification for compressed loader: + * Copyright (C) 2002 Stuart Menefy (stuart.menefy@st.com) + */ +#include <linux/linkage.h> +#include <asm/cache.h> +#include <asm/cpu/mmu_context.h> +#include <asm/cpu/registers.h> + +/* + * Fixed TLB entries to identity map the beginning of RAM + */ +#define MMUIR_TEXT_H 0x0000000000000003 | CONFIG_MEMORY_START + /* Enabled, Shared, ASID 0, Eff. Add. 0xA0000000 */ +#define MMUIR_TEXT_L 0x000000000000009a | CONFIG_MEMORY_START + /* 512 Mb, Cacheable (Write-back), execute, Not User, Ph. Add. */ + +#define MMUDR_CACHED_H 0x0000000000000003 | CONFIG_MEMORY_START + /* Enabled, Shared, ASID 0, Eff. Add. 0xA0000000 */ +#define MMUDR_CACHED_L 0x000000000000015a | CONFIG_MEMORY_START + /* 512 Mb, Cacheable (Write-back), read/write, Not User, Ph. Add. */ + +#define ICCR0_INIT_VAL ICCR0_ON | ICCR0_ICI /* ICE + ICI */ +#define ICCR1_INIT_VAL ICCR1_NOLOCK /* No locking */ + +#if 1 +#define OCCR0_INIT_VAL OCCR0_ON | OCCR0_OCI | OCCR0_WB /* OCE + OCI + WB */ +#else +#define OCCR0_INIT_VAL OCCR0_OFF +#endif +#define OCCR1_INIT_VAL OCCR1_NOLOCK /* No locking */ + + .text + + .global startup +startup: + /* + * Prevent speculative fetch on device memory due to + * uninitialized target registers. + * This must be executed before the first branch. + */ + ptabs/u r63, tr0 + ptabs/u r63, tr1 + ptabs/u r63, tr2 + ptabs/u r63, tr3 + ptabs/u r63, tr4 + ptabs/u r63, tr5 + ptabs/u r63, tr6 + ptabs/u r63, tr7 + synci + + /* + * Set initial TLB entries for cached and uncached regions. + * Note: PTA/BLINK is PIC code, PTABS/BLINK isn't ! + */ + /* Clear ITLBs */ + pta 1f, tr1 + movi ITLB_FIXED, r21 + movi ITLB_LAST_VAR_UNRESTRICTED+TLB_STEP, r22 +1: putcfg r21, 0, r63 /* Clear MMUIR[n].PTEH.V */ + addi r21, TLB_STEP, r21 + bne r21, r22, tr1 + + /* Clear DTLBs */ + pta 1f, tr1 + movi DTLB_FIXED, r21 + movi DTLB_LAST_VAR_UNRESTRICTED+TLB_STEP, r22 +1: putcfg r21, 0, r63 /* Clear MMUDR[n].PTEH.V */ + addi r21, TLB_STEP, r21 + bne r21, r22, tr1 + + /* Map one big (512Mb) page for ITLB */ + movi ITLB_FIXED, r21 + movi MMUIR_TEXT_L, r22 /* PTEL first */ + putcfg r21, 1, r22 /* Set MMUIR[0].PTEL */ + movi MMUIR_TEXT_H, r22 /* PTEH last */ + putcfg r21, 0, r22 /* Set MMUIR[0].PTEH */ + + /* Map one big CACHED (512Mb) page for DTLB */ + movi DTLB_FIXED, r21 + movi MMUDR_CACHED_L, r22 /* PTEL first */ + putcfg r21, 1, r22 /* Set MMUDR[0].PTEL */ + movi MMUDR_CACHED_H, r22 /* PTEH last */ + putcfg r21, 0, r22 /* Set MMUDR[0].PTEH */ + + /* ICache */ + movi ICCR_BASE, r21 + movi ICCR0_INIT_VAL, r22 + movi ICCR1_INIT_VAL, r23 + putcfg r21, ICCR_REG0, r22 + putcfg r21, ICCR_REG1, r23 + synci + + /* OCache */ + movi OCCR_BASE, r21 + movi OCCR0_INIT_VAL, r22 + movi OCCR1_INIT_VAL, r23 + putcfg r21, OCCR_REG0, r22 + putcfg r21, OCCR_REG1, r23 + synco + + /* + * Enable the MMU. + * From here-on code can be non-PIC. + */ + movi SR_HARMLESS | SR_ENABLE_MMU, r22 + putcon r22, SSR + movi 1f, r22 + putcon r22, SPC + synco + rte /* And now go into the hyperspace ... */ +1: /* ... that's the next instruction ! */ + + /* Set initial stack pointer */ + movi datalabel stack_start, r0 + ld.l r0, 0, r15 + + /* + * Clear bss + */ + pt 1f, tr1 + movi datalabel __bss_start, r22 + movi datalabel _end, r23 +1: st.l r22, 0, r63 + addi r22, 4, r22 + bne r22, r23, tr1 + + /* + * Decompress the kernel. + */ + pt decompress_kernel, tr0 + blink tr0, r18 + + /* + * Disable the MMU. + */ + movi SR_HARMLESS, r22 + putcon r22, SSR + movi 1f, r22 + putcon r22, SPC + synco + rte /* And now go into the hyperspace ... */ +1: /* ... that's the next instruction ! */ + + /* Jump into the decompressed kernel */ + movi datalabel (CONFIG_MEMORY_START + 0x2000)+1, r19 + ptabs r19, tr0 + blink tr0, r18 + + /* Shouldn't return here, but just in case, loop forever */ + pt 1f, tr0 +1: blink tr0, r63 diff --git a/arch/sh/boot/compressed/misc.c b/arch/sh/boot/compressed/misc_32.c index df65e305acf7..adcea31e663e 100644 --- a/arch/sh/boot/compressed/misc.c +++ b/arch/sh/boot/compressed/misc_32.c @@ -230,7 +230,10 @@ long* stack_start = &user_stack[STACK_SIZE]; void decompress_kernel(void) { output_data = 0; - output_ptr = P2SEGADDR((unsigned long)&_text+PAGE_SIZE); + output_ptr = PHYSADDR((unsigned long)&_text+PAGE_SIZE); +#ifdef CONFIG_29BIT + output_ptr |= P2SEG; +#endif free_mem_ptr = (unsigned long)&_end; free_mem_end_ptr = free_mem_ptr + HEAP_SIZE; diff --git a/arch/sh/boot/compressed/misc_64.c b/arch/sh/boot/compressed/misc_64.c new file mode 100644 index 000000000000..a006ef89b9dd --- /dev/null +++ b/arch/sh/boot/compressed/misc_64.c @@ -0,0 +1,250 @@ +/* + * arch/sh/boot/compressed/misc_64.c + * + * This is a collection of several routines from gzip-1.0.3 + * adapted for Linux. + * + * malloc by Hannu Savolainen 1993 and Matthias Urlichs 1994 + * + * Adapted for SHmedia from sh by Stuart Menefy, May 2002 + */ + +#include <asm/uaccess.h> + +/* cache.c */ +#define CACHE_ENABLE 0 +#define CACHE_DISABLE 1 +int cache_control(unsigned int command); + +/* + * gzip declarations + */ + +#define OF(args) args +#define STATIC static + +#undef memset +#undef memcpy +#define memzero(s, n) memset ((s), 0, (n)) + +typedef unsigned char uch; +typedef unsigned short ush; +typedef unsigned long ulg; + +#define WSIZE 0x8000 /* Window size must be at least 32k, */ + /* and a power of two */ + +static uch *inbuf; /* input buffer */ +static uch window[WSIZE]; /* Sliding window buffer */ + +static unsigned insize = 0; /* valid bytes in inbuf */ +static unsigned inptr = 0; /* index of next byte to be processed in inbuf */ +static unsigned outcnt = 0; /* bytes in output buffer */ + +/* gzip flag byte */ +#define ASCII_FLAG 0x01 /* bit 0 set: file probably ASCII text */ +#define CONTINUATION 0x02 /* bit 1 set: continuation of multi-part gzip file */ +#define EXTRA_FIELD 0x04 /* bit 2 set: extra field present */ +#define ORIG_NAME 0x08 /* bit 3 set: original file name present */ +#define COMMENT 0x10 /* bit 4 set: file comment present */ +#define ENCRYPTED 0x20 /* bit 5 set: file is encrypted */ +#define RESERVED 0xC0 /* bit 6,7: reserved */ + +#define get_byte() (inptr < insize ? inbuf[inptr++] : fill_inbuf()) + +/* Diagnostic functions */ +#ifdef DEBUG +# define Assert(cond,msg) {if(!(cond)) error(msg);} +# define Trace(x) fprintf x +# define Tracev(x) {if (verbose) fprintf x ;} +# define Tracevv(x) {if (verbose>1) fprintf x ;} +# define Tracec(c,x) {if (verbose && (c)) fprintf x ;} +# define Tracecv(c,x) {if (verbose>1 && (c)) fprintf x ;} +#else +# define Assert(cond,msg) +# define Trace(x) +# define Tracev(x) +# define Tracevv(x) +# define Tracec(c,x) +# define Tracecv(c,x) +#endif + +static int fill_inbuf(void); +static void flush_window(void); +static void error(char *m); +static void gzip_mark(void **); +static void gzip_release(void **); + +extern char input_data[]; +extern int input_len; + +static long bytes_out = 0; +static uch *output_data; +static unsigned long output_ptr = 0; + +static void *malloc(int size); +static void free(void *where); +static void error(char *m); +static void gzip_mark(void **); +static void gzip_release(void **); + +static void puts(const char *); + +extern int _text; /* Defined in vmlinux.lds.S */ +extern int _end; +static unsigned long free_mem_ptr; +static unsigned long free_mem_end_ptr; + +#define HEAP_SIZE 0x10000 + +#include "../../../../lib/inflate.c" + +static void *malloc(int size) +{ + void *p; + + if (size < 0) + error("Malloc error\n"); + if (free_mem_ptr == 0) + error("Memory error\n"); + + free_mem_ptr = (free_mem_ptr + 3) & ~3; /* Align */ + + p = (void *) free_mem_ptr; + free_mem_ptr += size; + + if (free_mem_ptr >= free_mem_end_ptr) + error("\nOut of memory\n"); + + return p; +} + +static void free(void *where) +{ /* Don't care */ +} + +static void gzip_mark(void **ptr) +{ + *ptr = (void *) free_mem_ptr; +} + +static void gzip_release(void **ptr) +{ + free_mem_ptr = (long) *ptr; +} + +void puts(const char *s) +{ +} + +void *memset(void *s, int c, size_t n) +{ + int i; + char *ss = (char *) s; + + for (i = 0; i < n; i++) + ss[i] = c; + return s; +} + +void *memcpy(void *__dest, __const void *__src, size_t __n) +{ + int i; + char *d = (char *) __dest, *s = (char *) __src; + + for (i = 0; i < __n; i++) + d[i] = s[i]; + return __dest; +} + +/* =========================================================================== + * Fill the input buffer. This is called only when the buffer is empty + * and at least one byte is really needed. + */ +static int fill_inbuf(void) +{ + if (insize != 0) { + error("ran out of input data\n"); + } + + inbuf = input_data; + insize = input_len; + inptr = 1; + return inbuf[0]; +} + +/* =========================================================================== + * Write the output window window[0..outcnt-1] and update crc and bytes_out. + * (Used for the decompressed data only.) + */ +static void flush_window(void) +{ + ulg c = crc; /* temporary variable */ + unsigned n; + uch *in, *out, ch; + + in = window; + out = &output_data[output_ptr]; + for (n = 0; n < outcnt; n++) { + ch = *out++ = *in++; + c = crc_32_tab[((int) c ^ ch) & 0xff] ^ (c >> 8); + } + crc = c; + bytes_out += (ulg) outcnt; + output_ptr += (ulg) outcnt; + outcnt = 0; + puts("."); +} + +static void error(char *x) +{ + puts("\n\n"); + puts(x); + puts("\n\n -- System halted"); + + while (1) ; /* Halt */ +} + +#define STACK_SIZE (4096) +long __attribute__ ((aligned(8))) user_stack[STACK_SIZE]; +long *stack_start = &user_stack[STACK_SIZE]; + +void decompress_kernel(void) +{ + output_data = (uch *) (CONFIG_MEMORY_START + 0x2000); + free_mem_ptr = (unsigned long) &_end; + free_mem_end_ptr = free_mem_ptr + HEAP_SIZE; + + makecrc(); + puts("Uncompressing Linux... "); + cache_control(CACHE_ENABLE); + gunzip(); + puts("\n"); + +#if 0 + /* When booting from ROM may want to do something like this if the + * boot loader doesn't. + */ + + /* Set up the parameters and command line */ + { + volatile unsigned int *parambase = + (int *) (CONFIG_MEMORY_START + 0x1000); + + parambase[0] = 0x1; /* MOUNT_ROOT_RDONLY */ + parambase[1] = 0x0; /* RAMDISK_FLAGS */ + parambase[2] = 0x0200; /* ORIG_ROOT_DEV */ + parambase[3] = 0x0; /* LOADER_TYPE */ + parambase[4] = 0x0; /* INITRD_START */ + parambase[5] = 0x0; /* INITRD_SIZE */ + parambase[6] = 0; + + strcpy((char *) ((int) parambase + 0x100), + "console=ttySC0,38400"); + } +#endif + + puts("Ok, booting the kernel.\n"); + + cache_control(CACHE_DISABLE); +} diff --git a/arch/sh/boot/compressed/vmlinux_64.lds b/arch/sh/boot/compressed/vmlinux_64.lds new file mode 100644 index 000000000000..59c2ef4aeda5 --- /dev/null +++ b/arch/sh/boot/compressed/vmlinux_64.lds @@ -0,0 +1,64 @@ +/* + * ld script to make compressed SuperH/shmedia Linux kernel+decompression + * bootstrap + * Modified by Stuart Menefy from arch/sh/vmlinux.lds.S written by Niibe Yutaka + */ + + +#ifdef CONFIG_LITTLE_ENDIAN +/* OUTPUT_FORMAT("elf32-sh64l-linux", "elf32-sh64l-linux", "elf32-sh64l-linux") */ +#define NOP 0x6ff0fff0 +#else +/* OUTPUT_FORMAT("elf32-sh64", "elf32-sh64", "elf32-sh64") */ +#define NOP 0xf0fff06f +#endif + +OUTPUT_FORMAT("elf32-sh64-linux") +OUTPUT_ARCH(sh) +ENTRY(_start) + +#define ALIGNED_GAP(section, align) (((ADDR(section)+SIZEOF(section)+(align)-1) & ~((align)-1))-ADDR(section)) +#define FOLLOWING(section, align) AT (LOADADDR(section) + ALIGNED_GAP(section,align)) + +SECTIONS +{ + _text = .; /* Text and read-only data */ + + .text : { + *(.text) + *(.text64) + *(.text..SHmedia32) + *(.fixup) + *(.gnu.warning) + } = NOP + . = ALIGN(4); + .rodata : { *(.rodata) } + + /* There is no 'real' reason for eight byte alignment, four would work + * as well, but gdb downloads much (*4) faster with this. + */ + . = ALIGN(8); + .image : { *(.image) } + . = ALIGN(4); + _etext = .; /* End of text section */ + + .data : /* Data */ + FOLLOWING(.image, 4) + { + _data = .; + *(.data) + } + _data_image = LOADADDR(.data);/* Address of data section in ROM */ + + _edata = .; /* End of data section */ + + .stack : { stack = .; _stack = .; } + + . = ALIGN(4); + __bss_start = .; /* BSS */ + .bss : { + *(.bss) + } + . = ALIGN(4); + _end = . ; +} diff --git a/arch/sh/cchips/voyagergx/Makefile b/arch/sh/cchips/voyagergx/Makefile deleted file mode 100644 index f73963cb3744..000000000000 --- a/arch/sh/cchips/voyagergx/Makefile +++ /dev/null @@ -1,9 +0,0 @@ -# -# Makefile for VoyagerGX -# - -obj-y := irq.o setup.o - -obj-$(CONFIG_USB_OHCI_HCD) += consistent.o - -EXTRA_CFLAGS += -Werror diff --git a/arch/sh/cchips/voyagergx/consistent.c b/arch/sh/cchips/voyagergx/consistent.c deleted file mode 100644 index 07e8b9c5a531..000000000000 --- a/arch/sh/cchips/voyagergx/consistent.c +++ /dev/null @@ -1,121 +0,0 @@ -/* - * arch/sh/cchips/voyagergx/consistent.c - * - * Copyright (C) 2004 Paul Mundt - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#include <linux/mm.h> -#include <linux/dma-mapping.h> -#include <linux/slab.h> -#include <linux/list.h> -#include <linux/types.h> -#include <linux/module.h> -#include <linux/device.h> -#include <asm/io.h> - - -struct voya_alloc_entry { - struct list_head list; - unsigned long ofs; - unsigned long len; -}; - -static DEFINE_SPINLOCK(voya_list_lock); -static LIST_HEAD(voya_alloc_list); - -#define OHCI_SRAM_START 0xb0000000 -#define OHCI_HCCA_SIZE 0x100 -#define OHCI_SRAM_SIZE 0x10000 - -#define VOYAGER_OHCI_NAME "voyager-ohci" - -void *voyagergx_consistent_alloc(struct device *dev, size_t size, - dma_addr_t *handle, gfp_t flag) -{ - struct list_head *list = &voya_alloc_list; - struct voya_alloc_entry *entry; - unsigned long start, end; - unsigned long flags; - - /* - * The SM501 contains an integrated 8051 with its own SRAM. - * Devices within the cchip can all hook into the 8051 SRAM. - * We presently use this for the OHCI. - * - * Everything else goes through consistent_alloc(). - */ - if (!dev || strcmp(dev->driver->name, VOYAGER_OHCI_NAME)) - return NULL; - - start = OHCI_SRAM_START + OHCI_HCCA_SIZE; - - entry = kmalloc(sizeof(struct voya_alloc_entry), GFP_ATOMIC); - if (!entry) - return ERR_PTR(-ENOMEM); - - entry->len = (size + 15) & ~15; - - /* - * The basis for this allocator is dwmw2's malloc.. the - * Matrox allocator :-) - */ - spin_lock_irqsave(&voya_list_lock, flags); - list_for_each(list, &voya_alloc_list) { - struct voya_alloc_entry *p; - - p = list_entry(list, struct voya_alloc_entry, list); - - if (p->ofs - start >= size) - goto out; - - start = p->ofs + p->len; - } - - end = start + (OHCI_SRAM_SIZE - OHCI_HCCA_SIZE); - list = &voya_alloc_list; - - if (end - start >= size) { -out: - entry->ofs = start; - list_add_tail(&entry->list, list); - spin_unlock_irqrestore(&voya_list_lock, flags); - - *handle = start; - return (void *)start; - } - - kfree(entry); - spin_unlock_irqrestore(&voya_list_lock, flags); - - return ERR_PTR(-EINVAL); -} - -int voyagergx_consistent_free(struct device *dev, size_t size, - void *vaddr, dma_addr_t handle) -{ - struct voya_alloc_entry *entry; - unsigned long flags; - - if (!dev || strcmp(dev->driver->name, VOYAGER_OHCI_NAME)) - return -EINVAL; - - spin_lock_irqsave(&voya_list_lock, flags); - list_for_each_entry(entry, &voya_alloc_list, list) { - if (entry->ofs != handle) - continue; - - list_del(&entry->list); - kfree(entry); - - break; - } - spin_unlock_irqrestore(&voya_list_lock, flags); - - return 0; -} - -EXPORT_SYMBOL(voyagergx_consistent_alloc); -EXPORT_SYMBOL(voyagergx_consistent_free); diff --git a/arch/sh/cchips/voyagergx/irq.c b/arch/sh/cchips/voyagergx/irq.c deleted file mode 100644 index ade303876841..000000000000 --- a/arch/sh/cchips/voyagergx/irq.c +++ /dev/null @@ -1,101 +0,0 @@ -/* -------------------------------------------------------------------- */ -/* setup_voyagergx.c: */ -/* -------------------------------------------------------------------- */ -/* This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - - Copyright 2003 (c) Lineo uSolutions,Inc. -*/ -#include <linux/interrupt.h> -#include <linux/init.h> -#include <linux/io.h> -#include <asm/voyagergx.h> -#include <asm/rts7751r2d.h> - -enum { - UNUSED = 0, - - /* voyager specific interrupt sources */ - UP, G54, G53, G52, G51, G50, G49, G48, - I2C, PW, DMA, PCI, I2S, AC, US, - U1, U0, CV, MC, S1, S0, - UH, TWOD, ZD, PV, CI, -}; - -static struct intc_vect vectors[] __initdata = { - INTC_IRQ(UP, IRQ_SM501_UP), INTC_IRQ(G54, IRQ_SM501_G54), - INTC_IRQ(G53, IRQ_SM501_G53), INTC_IRQ(G52, IRQ_SM501_G52), - INTC_IRQ(G51, IRQ_SM501_G51), INTC_IRQ(G50, IRQ_SM501_G50), - INTC_IRQ(G49, IRQ_SM501_G49), INTC_IRQ(G48, IRQ_SM501_G48), - INTC_IRQ(I2C, IRQ_SM501_I2C), INTC_IRQ(PW, IRQ_SM501_PW), - INTC_IRQ(DMA, IRQ_SM501_DMA), INTC_IRQ(PCI, IRQ_SM501_PCI), - INTC_IRQ(I2S, IRQ_SM501_I2S), INTC_IRQ(AC, IRQ_SM501_AC), - INTC_IRQ(US, IRQ_SM501_US), INTC_IRQ(U1, IRQ_SM501_U1), - INTC_IRQ(U0, IRQ_SM501_U0), INTC_IRQ(CV, IRQ_SM501_CV), - INTC_IRQ(MC, IRQ_SM501_MC), INTC_IRQ(S1, IRQ_SM501_S1), - INTC_IRQ(S0, IRQ_SM501_S0), INTC_IRQ(UH, IRQ_SM501_UH), - INTC_IRQ(TWOD, IRQ_SM501_2D), INTC_IRQ(ZD, IRQ_SM501_ZD), - INTC_IRQ(PV, IRQ_SM501_PV), INTC_IRQ(CI, IRQ_SM501_CI), -}; - -static struct intc_mask_reg mask_registers[] __initdata = { - { VOYAGER_INT_MASK, 0, 32, /* "Interrupt Mask", MMIO_base + 0x30 */ - { UP, G54, G53, G52, G51, G50, G49, G48, - I2C, PW, 0, DMA, PCI, I2S, AC, US, - 0, 0, U1, U0, CV, MC, S1, S0, - 0, UH, 0, 0, TWOD, ZD, PV, CI } }, -}; - -static DECLARE_INTC_DESC(intc_desc, "voyagergx", vectors, - NULL, NULL, mask_registers, NULL, NULL); - -static unsigned int voyagergx_stat2irq[32] = { - IRQ_SM501_CI, IRQ_SM501_PV, IRQ_SM501_ZD, IRQ_SM501_2D, - 0, 0, IRQ_SM501_UH, 0, - IRQ_SM501_S0, IRQ_SM501_S1, IRQ_SM501_MC, IRQ_SM501_CV, - IRQ_SM501_U0, IRQ_SM501_U1, 0, 0, - IRQ_SM501_US, IRQ_SM501_AC, IRQ_SM501_I2S, IRQ_SM501_PCI, - IRQ_SM501_DMA, 0, IRQ_SM501_PW, IRQ_SM501_I2C, - IRQ_SM501_G48, IRQ_SM501_G49, IRQ_SM501_G50, IRQ_SM501_G51, - IRQ_SM501_G52, IRQ_SM501_G53, IRQ_SM501_G54, IRQ_SM501_UP -}; - -static void voyagergx_irq_demux(unsigned int irq, struct irq_desc *desc) -{ - unsigned long intv = ctrl_inl(INT_STATUS); - struct irq_desc *ext_desc; - unsigned int ext_irq; - unsigned int k = 0; - - while (intv) { - ext_irq = voyagergx_stat2irq[k]; - if (ext_irq && (intv & 1)) { - ext_desc = irq_desc + ext_irq; - handle_level_irq(ext_irq, ext_desc); - } - intv >>= 1; - k++; - } -} - -void __init setup_voyagergx_irq(void) -{ - printk(KERN_INFO "VoyagerGX on irq %d (mapped into %d to %d)\n", - IRQ_VOYAGER, - VOYAGER_IRQ_BASE, - VOYAGER_IRQ_BASE + VOYAGER_IRQ_NUM - 1); - - register_intc_controller(&intc_desc); - set_irq_chained_handler(IRQ_VOYAGER, voyagergx_irq_demux); -} diff --git a/arch/sh/cchips/voyagergx/setup.c b/arch/sh/cchips/voyagergx/setup.c deleted file mode 100644 index 33f03027c193..000000000000 --- a/arch/sh/cchips/voyagergx/setup.c +++ /dev/null @@ -1,37 +0,0 @@ -/* - * arch/sh/cchips/voyagergx/setup.c - * - * Setup routines for VoyagerGX cchip. - * - * Copyright (C) 2003 Lineo uSolutions, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#include <linux/init.h> -#include <linux/module.h> -#include <asm/io.h> -#include <asm/voyagergx.h> - -static int __init setup_voyagergx(void) -{ - unsigned long val; - - val = readl((void __iomem *)DRAM_CTRL); - val |= (DRAM_CTRL_CPU_COLUMN_SIZE_256 | - DRAM_CTRL_CPU_ACTIVE_PRECHARGE | - DRAM_CTRL_CPU_RESET | - DRAM_CTRL_REFRESH_COMMAND | - DRAM_CTRL_BLOCK_WRITE_TIME | - DRAM_CTRL_BLOCK_WRITE_PRECHARGE | - DRAM_CTRL_ACTIVE_PRECHARGE | - DRAM_CTRL_RESET | - DRAM_CTRL_REMAIN_ACTIVE); - writel(val, (void __iomem *)DRAM_CTRL); - - return 0; -} - -module_init(setup_voyagergx); diff --git a/arch/sh/configs/cayman_defconfig b/arch/sh/configs/cayman_defconfig new file mode 100644 index 000000000000..a05b278d72f5 --- /dev/null +++ b/arch/sh/configs/cayman_defconfig @@ -0,0 +1,1166 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.24-rc3 +# Fri Nov 23 14:15:55 2007 +# +CONFIG_SUPERH=y +# CONFIG_SUPERH32 is not set +CONFIG_SUPERH64=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +# CONFIG_GENERIC_TIME is not set +# CONFIG_GENERIC_CLOCKEVENTS is not set +CONFIG_SYS_SUPPORTS_PCI=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_NO_VIRT_TO_BUS=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +# CONFIG_SYSVIPC is not set +CONFIG_POSIX_MQUEUE=y +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_FAIR_GROUP_SCHED=y +CONFIG_FAIR_USER_SCHED=y +# CONFIG_FAIR_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +# CONFIG_BLK_DEV_INITRD is not set +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" + +# +# System type +# +CONFIG_CPU_SH5=y +# CONFIG_CPU_SUBTYPE_SH7619 is not set +# CONFIG_CPU_SUBTYPE_SH7206 is not set +# CONFIG_CPU_SUBTYPE_SH7705 is not set +# CONFIG_CPU_SUBTYPE_SH7706 is not set +# CONFIG_CPU_SUBTYPE_SH7707 is not set +# CONFIG_CPU_SUBTYPE_SH7708 is not set +# CONFIG_CPU_SUBTYPE_SH7709 is not set +# CONFIG_CPU_SUBTYPE_SH7710 is not set +# CONFIG_CPU_SUBTYPE_SH7712 is not set +# CONFIG_CPU_SUBTYPE_SH7720 is not set +# CONFIG_CPU_SUBTYPE_SH7750 is not set +# CONFIG_CPU_SUBTYPE_SH7091 is not set +# CONFIG_CPU_SUBTYPE_SH7750R is not set +# CONFIG_CPU_SUBTYPE_SH7750S is not set +# CONFIG_CPU_SUBTYPE_SH7751 is not set +# CONFIG_CPU_SUBTYPE_SH7751R is not set +# CONFIG_CPU_SUBTYPE_SH7760 is not set +# CONFIG_CPU_SUBTYPE_SH4_202 is not set +# CONFIG_CPU_SUBTYPE_SH7770 is not set +# CONFIG_CPU_SUBTYPE_SH7780 is not set +# CONFIG_CPU_SUBTYPE_SH7785 is not set +# CONFIG_CPU_SUBTYPE_SHX3 is not set +# CONFIG_CPU_SUBTYPE_SH7343 is not set +# CONFIG_CPU_SUBTYPE_SH7722 is not set +CONFIG_CPU_SUBTYPE_SH5_101=y +# CONFIG_CPU_SUBTYPE_SH5_103 is not set + +# +# Memory management options +# +CONFIG_QUICKLIST=y +CONFIG_MMU=y +CONFIG_PAGE_OFFSET=0x20000000 +CONFIG_MEMORY_START=0x80000000 +CONFIG_MEMORY_SIZE=0x00400000 +CONFIG_32BIT=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_DEFAULT=y +CONFIG_MAX_ACTIVE_REGIONS=1 +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_PAGE_SIZE_4KB=y +# CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_64KB is not set +CONFIG_HUGETLB_PAGE_SIZE_64K=y +# CONFIG_HUGETLB_PAGE_SIZE_256K is not set +# CONFIG_HUGETLB_PAGE_SIZE_1MB is not set +# CONFIG_HUGETLB_PAGE_SIZE_4MB is not set +# CONFIG_HUGETLB_PAGE_SIZE_64MB is not set +# CONFIG_HUGETLB_PAGE_SIZE_512MB is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_SPARSEMEM_STATIC=y +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_RESOURCES_64BIT=y +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_NR_QUICK=2 + +# +# Cache configuration +# +# CONFIG_SH_DIRECT_MAPPED is not set +# CONFIG_CACHE_WRITEBACK is not set +# CONFIG_CACHE_WRITETHROUGH is not set +CONFIG_CACHE_OFF=y + +# +# Processor features +# +CONFIG_CPU_LITTLE_ENDIAN=y +# CONFIG_CPU_BIG_ENDIAN is not set +CONFIG_SH_FPU=y +# CONFIG_SH64_FPU_DENORM_FLUSH is not set +CONFIG_SH64_USER_MISALIGNED_FIXUP=y +CONFIG_SH64_ID2815_WORKAROUND=y +CONFIG_CPU_HAS_FPU=y + +# +# Board support +# +CONFIG_SH_CAYMAN=y + +# +# Timer and clock configuration +# +CONFIG_SH_TIMER_IRQ=16 +CONFIG_SH_PCLK_FREQ=50000000 +# CONFIG_TICK_ONESHOT is not set + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# DMA support +# + +# +# Companion Chips +# + +# +# Additional SuperH Device Drivers +# +CONFIG_HEARTBEAT=y +# CONFIG_PUSH_SWITCH is not set + +# +# Kernel features +# +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +# CONFIG_KEXEC is not set +# CONFIG_CRASH_DUMP is not set +# CONFIG_PREEMPT_NONE is not set +# CONFIG_PREEMPT_VOLUNTARY is not set +CONFIG_PREEMPT=y +CONFIG_PREEMPT_BKL=y +CONFIG_GUSA=y + +# +# Boot options +# +CONFIG_ZERO_PAGE_OFFSET=0x00001000 +CONFIG_BOOT_LINK_OFFSET=0x00800000 +# CONFIG_CMDLINE_BOOL is not set + +# +# Bus options +# +CONFIG_PCI=y +CONFIG_SH_PCIDMA_NONCOHERENT=y +CONFIG_PCI_AUTO=y +CONFIG_PCI_AUTO_UPDATE_RESOURCES=y +# CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_PCI_LEGACY=y +# CONFIG_PCI_DEBUG is not set +# CONFIG_PCCARD is not set +# CONFIG_HOTPLUG_PCI is not set + +# +# Executable file formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +# CONFIG_MTD is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +# CONFIG_PHANTOM is not set +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +CONFIG_SCSI_MULTI_LUN=y +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +CONFIG_SCSI_SPI_ATTRS=y +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_ARCMSR is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_HPTIOP is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_STEX is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +# CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_QLA_ISCSI is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_NSP32 is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_SRP is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_FIREWIRE is not set +# CONFIG_IEEE1394 is not set +# CONFIG_I2O is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_IP1000 is not set +# CONFIG_ARCNET is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +# CONFIG_MII is not set +# CONFIG_AX88796 is not set +# CONFIG_STNIC is not set +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_SMC91X is not set +# CONFIG_SMC911X is not set +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_NET_PCI is not set +# CONFIG_B44 is not set +CONFIG_NETDEV_1000=y +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_E1000E is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +# CONFIG_SK98LIN is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set +# CONFIG_QLA3XXX is not set +# CONFIG_ATL1 is not set +CONFIG_NETDEV_10000=y +# CONFIG_CHELSIO_T1 is not set +# CONFIG_CHELSIO_T3 is not set +# CONFIG_IXGBE is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set +# CONFIG_MYRI10GE is not set +# CONFIG_NETXEN_NIC is not set +# CONFIG_NIU is not set +# CONFIG_MLX4_CORE is not set +# CONFIG_TEHUTI is not set +# CONFIG_TR is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NET_FC is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_SH_SCI is not set +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_DEVPORT=y +CONFIG_I2C=m +CONFIG_I2C_BOARDINFO=y +# CONFIG_I2C_CHARDEV is not set + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PROSAVAGE is not set +# CONFIG_I2C_SAVAGE4 is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set +# CONFIG_I2C_VOODOO3 is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_I5K_AMB is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX6650 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SIS5595 is not set +# CONFIG_SENSORS_DME1737 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_VIA686A is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_VT8231 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set + +# +# PCI-based Watchdog Cards +# +# CONFIG_PCIPCWATCHDOG is not set +# CONFIG_WDTPCI is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set + +# +# Multimedia devices +# +CONFIG_VIDEO_DEV=m +# CONFIG_VIDEO_V4L1 is not set +# CONFIG_VIDEO_V4L1_COMPAT is not set +CONFIG_VIDEO_V4L2=y +CONFIG_VIDEO_CAPTURE_DRIVERS=y +# CONFIG_VIDEO_ADV_DEBUG is not set +CONFIG_VIDEO_HELPER_CHIPS_AUTO=y +# CONFIG_VIDEO_VIVI is not set +# CONFIG_VIDEO_SAA5246A is not set +# CONFIG_VIDEO_SAA5249 is not set +# CONFIG_VIDEO_SAA7134 is not set +# CONFIG_VIDEO_HEXIUM_ORION is not set +# CONFIG_VIDEO_HEXIUM_GEMINI is not set +# CONFIG_VIDEO_CX88 is not set +# CONFIG_VIDEO_CX23885 is not set +# CONFIG_VIDEO_CAFE_CCIC is not set +# CONFIG_RADIO_ADAPTERS is not set +CONFIG_DVB_CORE=y +# CONFIG_DVB_CORE_ATTACH is not set +CONFIG_DVB_CAPTURE_DRIVERS=y + +# +# Supported SAA7146 based PCI Adapters +# + +# +# Supported FlexCopII (B2C2) Adapters +# +# CONFIG_DVB_B2C2_FLEXCOP is not set + +# +# Supported BT878 Adapters +# + +# +# Supported Pluto2 Adapters +# +# CONFIG_DVB_PLUTO2 is not set + +# +# Supported DVB Frontends +# + +# +# Customise DVB Frontends +# +# CONFIG_DVB_FE_CUSTOMISE is not set + +# +# DVB-S (satellite) frontends +# +# CONFIG_DVB_STV0299 is not set +# CONFIG_DVB_CX24110 is not set +# CONFIG_DVB_CX24123 is not set +# CONFIG_DVB_TDA8083 is not set +# CONFIG_DVB_MT312 is not set +# CONFIG_DVB_VES1X93 is not set +# CONFIG_DVB_S5H1420 is not set +# CONFIG_DVB_TDA10086 is not set + +# +# DVB-T (terrestrial) frontends +# +# CONFIG_DVB_SP8870 is not set +# CONFIG_DVB_SP887X is not set +# CONFIG_DVB_CX22700 is not set +# CONFIG_DVB_CX22702 is not set +# CONFIG_DVB_L64781 is not set +# CONFIG_DVB_TDA1004X is not set +# CONFIG_DVB_NXT6000 is not set +# CONFIG_DVB_MT352 is not set +# CONFIG_DVB_ZL10353 is not set +# CONFIG_DVB_DIB3000MB is not set +# CONFIG_DVB_DIB3000MC is not set +# CONFIG_DVB_DIB7000M is not set +# CONFIG_DVB_DIB7000P is not set + +# +# DVB-C (cable) frontends +# +# CONFIG_DVB_VES1820 is not set +# CONFIG_DVB_TDA10021 is not set +# CONFIG_DVB_TDA10023 is not set +# CONFIG_DVB_STV0297 is not set + +# +# ATSC (North American/Korean Terrestrial/Cable DTV) frontends +# +# CONFIG_DVB_NXT200X is not set +# CONFIG_DVB_OR51211 is not set +# CONFIG_DVB_OR51132 is not set +# CONFIG_DVB_BCM3510 is not set +# CONFIG_DVB_LGDT330X is not set +# CONFIG_DVB_S5H1409 is not set + +# +# Tuners/PLL support +# +# CONFIG_DVB_PLL is not set +# CONFIG_DVB_TDA826X is not set +# CONFIG_DVB_TDA827X is not set +# CONFIG_DVB_TUNER_QT1010 is not set +# CONFIG_DVB_TUNER_MT2060 is not set +# CONFIG_DVB_TUNER_MT2266 is not set +# CONFIG_DVB_TUNER_MT2131 is not set +# CONFIG_DVB_TUNER_DIB0070 is not set + +# +# Miscellaneous devices +# +# CONFIG_DVB_LNBP21 is not set +# CONFIG_DVB_ISL6421 is not set +# CONFIG_DVB_TUA6100 is not set +CONFIG_DAB=y + +# +# Graphics support +# +# CONFIG_DRM is not set +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=y +CONFIG_FB=y +CONFIG_FIRMWARE_EDID=y +# CONFIG_FB_DDC is not set +# CONFIG_FB_CFB_FILLRECT is not set +# CONFIG_FB_CFB_COPYAREA is not set +# CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +CONFIG_FB_MODE_HELPERS=y +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_CIRRUS is not set +# CONFIG_FB_PM2 is not set +# CONFIG_FB_CYBER2000 is not set +# CONFIG_FB_ASILIANT is not set +# CONFIG_FB_IMSTT is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_NVIDIA is not set +# CONFIG_FB_RIVA is not set +# CONFIG_FB_MATROX is not set +# CONFIG_FB_RADEON is not set +# CONFIG_FB_ATY128 is not set +# CONFIG_FB_ATY is not set +# CONFIG_FB_S3 is not set +# CONFIG_FB_SAVAGE is not set +# CONFIG_FB_SIS is not set +# CONFIG_FB_NEOMAGIC is not set +# CONFIG_FB_KYRO is not set +# CONFIG_FB_3DFX is not set +# CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_VT8623 is not set +# CONFIG_FB_TRIDENT is not set +# CONFIG_FB_ARK is not set +# CONFIG_FB_PM3 is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +CONFIG_FONTS=y +# CONFIG_FONT_8x8 is not set +CONFIG_FONT_8x16=y +# CONFIG_FONT_6x11 is not set +# CONFIG_FONT_7x14 is not set +# CONFIG_FONT_PEARL_8x8 is not set +# CONFIG_FONT_ACORN_8x8 is not set +# CONFIG_FONT_MINI_4x6 is not set +# CONFIG_FONT_SUN8x16 is not set +# CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_10x18 is not set +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +# CONFIG_LOGO_LINUX_CLUT224 is not set +# CONFIG_LOGO_SUPERH_MONO is not set +# CONFIG_LOGO_SUPERH_VGA16 is not set +CONFIG_LOGO_SUPERH_CLUT224=y + +# +# Sound +# +# CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +# CONFIG_USB is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set +# CONFIG_MMC is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_INFINIBAND is not set +# CONFIG_RTC_CLASS is not set + +# +# Userspace I/O +# +# CONFIG_UIO is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +CONFIG_MINIX_FS=y +CONFIG_ROMFS_FS=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +CONFIG_HUGETLBFS=y +CONFIG_HUGETLB_PAGE=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +# CONFIG_NLS is not set +# CONFIG_DLM is not set +CONFIG_INSTRUMENTATION=y +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set + +# +# Kernel hacking +# +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +CONFIG_SCHED_DEBUG=y +CONFIG_SCHEDSTATS=y +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_PREEMPT=y +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +CONFIG_FRAME_POINTER=y +CONFIG_FORCED_INLINING=y +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_SAMPLES is not set +# CONFIG_SH_STANDARD_BIOS is not set +# CONFIG_EARLY_SCIF_CONSOLE is not set +# CONFIG_DEBUG_BOOTMEM is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_4KSTACKS is not set +CONFIG_SH64_PROC_ASIDS=y +CONFIG_SH64_SR_WATCH=y +# CONFIG_POOR_MANS_STRACE is not set +# CONFIG_SH_ALPHANUMERIC is not set +# CONFIG_SH_NO_BSS_INIT is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_CRYPTO is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/sh/configs/hs7751rvoip_defconfig b/arch/sh/configs/hs7751rvoip_defconfig deleted file mode 100644 index 5d9da5a02759..000000000000 --- a/arch/sh/configs/hs7751rvoip_defconfig +++ /dev/null @@ -1,908 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.18 -# Tue Oct 3 13:04:52 2006 -# -CONFIG_SUPERH=y -CONFIG_RWSEM_GENERIC_SPINLOCK=y -CONFIG_GENERIC_FIND_NEXT_BIT=y -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_LOCK_KERNEL=y -CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set -CONFIG_POSIX_MQUEUE=y -CONFIG_BSD_PROCESS_ACCT=y -# CONFIG_BSD_PROCESS_ACCT_V3 is not set -# CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set -# CONFIG_AUDIT is not set -# CONFIG_IKCONFIG is not set -# CONFIG_RELAY is not set -CONFIG_INITRAMFS_SOURCE="" -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_SYSCTL=y -CONFIG_EMBEDDED=y -CONFIG_UID16=y -# CONFIG_SYSCTL_SYSCALL is not set -# CONFIG_KALLSYMS is not set -CONFIG_HOTPLUG=y -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_EPOLL=y -CONFIG_SHMEM=y -CONFIG_SLAB=y -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y - -# -# Block layer -# -CONFIG_BLOCK=y -# CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y -# CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" - -# -# System type -# -# CONFIG_SH_SOLUTION_ENGINE is not set -# CONFIG_SH_7751_SOLUTION_ENGINE is not set -# CONFIG_SH_7300_SOLUTION_ENGINE is not set -# CONFIG_SH_7343_SOLUTION_ENGINE is not set -# CONFIG_SH_73180_SOLUTION_ENGINE is not set -# CONFIG_SH_7751_SYSTEMH is not set -# CONFIG_SH_HP6XX is not set -# CONFIG_SH_EC3104 is not set -# CONFIG_SH_SATURN is not set -# CONFIG_SH_DREAMCAST is not set -# CONFIG_SH_BIGSUR is not set -# CONFIG_SH_MPC1211 is not set -# CONFIG_SH_SH03 is not set -# CONFIG_SH_SECUREEDGE5410 is not set -CONFIG_SH_HS7751RVOIP=y -# CONFIG_SH_7710VOIPGW is not set -# CONFIG_SH_RTS7751R2D is not set -# CONFIG_SH_R7780RP is not set -# CONFIG_SH_EDOSK7705 is not set -# CONFIG_SH_SH4202_MICRODEV is not set -# CONFIG_SH_LANDISK is not set -# CONFIG_SH_TITAN is not set -# CONFIG_SH_SHMIN is not set -# CONFIG_SH_UNKNOWN is not set - -# -# Processor selection -# -CONFIG_CPU_SH4=y - -# -# SH-2 Processor Support -# -# CONFIG_CPU_SUBTYPE_SH7604 is not set - -# -# SH-3 Processor Support -# -# CONFIG_CPU_SUBTYPE_SH7300 is not set -# CONFIG_CPU_SUBTYPE_SH7705 is not set -# CONFIG_CPU_SUBTYPE_SH7706 is not set -# CONFIG_CPU_SUBTYPE_SH7707 is not set -# CONFIG_CPU_SUBTYPE_SH7708 is not set -# CONFIG_CPU_SUBTYPE_SH7709 is not set -# CONFIG_CPU_SUBTYPE_SH7710 is not set - -# -# SH-4 Processor Support -# -# CONFIG_CPU_SUBTYPE_SH7750 is not set -# CONFIG_CPU_SUBTYPE_SH7091 is not set -# CONFIG_CPU_SUBTYPE_SH7750R is not set -# CONFIG_CPU_SUBTYPE_SH7750S is not set -# CONFIG_CPU_SUBTYPE_SH7751 is not set -CONFIG_CPU_SUBTYPE_SH7751R=y -# CONFIG_CPU_SUBTYPE_SH7760 is not set -# CONFIG_CPU_SUBTYPE_SH4_202 is not set - -# -# ST40 Processor Support -# -# CONFIG_CPU_SUBTYPE_ST40STB1 is not set -# CONFIG_CPU_SUBTYPE_ST40GX1 is not set - -# -# SH-4A Processor Support -# -# CONFIG_CPU_SUBTYPE_SH7770 is not set -# CONFIG_CPU_SUBTYPE_SH7780 is not set - -# -# SH4AL-DSP Processor Support -# -# CONFIG_CPU_SUBTYPE_SH73180 is not set -# CONFIG_CPU_SUBTYPE_SH7343 is not set - -# -# Memory management options -# -CONFIG_MMU=y -CONFIG_PAGE_OFFSET=0x80000000 -CONFIG_MEMORY_START=0x0c000000 -CONFIG_MEMORY_SIZE=0x04000000 -CONFIG_VSYSCALL=y -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set - -# -# Cache configuration -# -# CONFIG_SH_DIRECT_MAPPED is not set -# CONFIG_SH_WRITETHROUGH is not set -# CONFIG_SH_OCRAM is not set - -# -# Processor features -# -CONFIG_CPU_LITTLE_ENDIAN=y -CONFIG_SH_FPU=y -# CONFIG_SH_DSP is not set -# CONFIG_SH_STORE_QUEUES is not set -CONFIG_CPU_HAS_INTEVT=y -CONFIG_CPU_HAS_SR_RB=y - -# -# Timer support -# -CONFIG_SH_TMU=y - -# -# HS7751RVoIP options -# -CONFIG_HS7751RVOIP_CODEC=y -CONFIG_SH_PCLK_FREQ=60000000 - -# -# CPU Frequency scaling -# -# CONFIG_CPU_FREQ is not set - -# -# DMA support -# -# CONFIG_SH_DMA is not set - -# -# Companion Chips -# -# CONFIG_HD6446X_SERIES is not set - -# -# Kernel features -# -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y -# CONFIG_HZ_1000 is not set -CONFIG_HZ=250 -# CONFIG_KEXEC is not set -# CONFIG_SMP is not set -# CONFIG_PREEMPT_NONE is not set -# CONFIG_PREEMPT_VOLUNTARY is not set -CONFIG_PREEMPT=y -CONFIG_PREEMPT_BKL=y - -# -# Boot options -# -CONFIG_ZERO_PAGE_OFFSET=0x00001000 -CONFIG_BOOT_LINK_OFFSET=0x00800000 -# CONFIG_UBC_WAKEUP is not set -CONFIG_CMDLINE_BOOL=y -CONFIG_CMDLINE="mem=64M console=ttySC1,115200 root=/dev/hda1" - -# -# Bus options -# -# CONFIG_PCI is not set - -# -# PCCARD (PCMCIA/CardBus) support -# -# CONFIG_PCCARD is not set - -# -# PCI Hotplug Support -# - -# -# Executable file formats -# -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_FLAT is not set -# CONFIG_BINFMT_MISC is not set - -# -# Power management options (EXPERIMENTAL) -# -# CONFIG_PM is not set - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -# CONFIG_NETDEBUG is not set -CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y -CONFIG_UNIX=y -CONFIG_XFRM=y -# CONFIG_XFRM_USER is not set -# CONFIG_XFRM_SUB_POLICY is not set -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_ADVANCED_ROUTER=y -CONFIG_ASK_IP_FIB_HASH=y -# CONFIG_IP_FIB_TRIE is not set -CONFIG_IP_FIB_HASH=y -# CONFIG_IP_MULTIPLE_TABLES is not set -# CONFIG_IP_ROUTE_MULTIPATH is not set -# CONFIG_IP_ROUTE_VERBOSE is not set -# CONFIG_IP_PNP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_INET_XFRM_MODE_TRANSPORT=y -CONFIG_INET_XFRM_MODE_TUNNEL=y -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_CUBIC=y -CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set -# CONFIG_NETWORK_SECMARK is not set -# CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_IEEE80211 is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=m -# CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# -# CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_DEV_COW_COMMON is not set -# CONFIG_BLK_DEV_LOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_RAM is not set -# CONFIG_BLK_DEV_INITRD is not set -# CONFIG_CDROM_PKTCDVD is not set -# CONFIG_ATA_OVER_ETH is not set - -# -# ATA/ATAPI/MFM/RLL support -# -CONFIG_IDE=y -CONFIG_IDE_MAX_HWIFS=1 -CONFIG_BLK_DEV_IDE=y - -# -# Please see Documentation/ide.txt for help/info on IDE drives -# -# CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -# CONFIG_BLK_DEV_IDECD is not set -# CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set -# CONFIG_IDE_TASK_IOCTL is not set - -# -# IDE chipset support/bugfixes -# -CONFIG_IDE_GENERIC=y -# CONFIG_IDE_ARM is not set -# CONFIG_BLK_DEV_IDEDMA is not set -# CONFIG_IDEDMA_AUTO is not set -# CONFIG_BLK_DEV_HD is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -# CONFIG_SCSI is not set -# CONFIG_SCSI_NETLINK is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# -# CONFIG_ATA is not set - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# Network device support -# -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set - -# -# PHY device support -# -# CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_STNIC is not set -# CONFIG_SMC91X is not set - -# -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices -# - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set - -# -# Userland interfaces -# -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -CONFIG_SERIO=y -CONFIG_SERIO_I8042=y -CONFIG_SERIO_SERPORT=y -# CONFIG_SERIO_LIBPS2 is not set -# CONFIG_SERIO_RAW is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -# CONFIG_VT is not set -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -# CONFIG_SERIAL_8250 is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_SH_SCI=y -CONFIG_SERIAL_SH_SCI_NR_UARTS=2 -CONFIG_SERIAL_SH_SCI_CONSOLE=y -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_UNIX98_PTYS=y -# CONFIG_LEGACY_PTYS is not set - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -CONFIG_HW_RANDOM=y -# CONFIG_GEN_RTC is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# -# CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set - -# -# I2C support -# -# CONFIG_I2C is not set - -# -# SPI support -# -# CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# - -# -# Hardware Monitoring support -# -CONFIG_HWMON=y -# CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_ABITUGURU is not set -# CONFIG_SENSORS_F71805F is not set -# CONFIG_SENSORS_VT1211 is not set -# CONFIG_HWMON_DEBUG_CHIP is not set - -# -# Misc devices -# - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set -CONFIG_VIDEO_V4L2=y - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -CONFIG_FIRMWARE_EDID=y -# CONFIG_FB is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -# CONFIG_USB_ARCH_HAS_HCD is not set -# CONFIG_USB_ARCH_HAS_OHCI is not set -# CONFIG_USB_ARCH_HAS_EHCI is not set - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# LED devices -# -# CONFIG_NEW_LEDS is not set - -# -# LED drivers -# - -# -# LED Triggers -# - -# -# InfiniBand support -# - -# -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# - -# -# Real Time Clock -# -# CONFIG_RTC_CLASS is not set - -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT2_FS_XIP is not set -# CONFIG_EXT3_FS is not set -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set -# CONFIG_XFS_FS is not set -# CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_PROC_SYSCTL=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_TMPFS_POSIX_ACL is not set -# CONFIG_HUGETLBFS is not set -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y -# CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -CONFIG_NFS_V4=y -CONFIG_NFS_DIRECTIO=y -# CONFIG_NFSD is not set -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -CONFIG_SUNRPC_GSS=y -CONFIG_RPCSEC_GSS_KRB5=y -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -CONFIG_MSDOS_PARTITION=y -# CONFIG_BSD_DISKLABEL is not set -# CONFIG_MINIX_SUBPARTITION is not set -# CONFIG_SOLARIS_X86_PARTITION is not set -# CONFIG_UNIXWARE_DISKLABEL is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_KARMA_PARTITION is not set -# CONFIG_EFI_PARTITION is not set - -# -# Native Language Support -# -# CONFIG_NLS is not set - -# -# Profiling support -# -# CONFIG_PROFILING is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -CONFIG_ENABLE_MUST_CHECK=y -# CONFIG_MAGIC_SYSRQ is not set -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_SH_STANDARD_BIOS is not set -# CONFIG_EARLY_SCIF_CONSOLE is not set -# CONFIG_KGDB is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -CONFIG_CRYPTO=y -CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_BLKCIPHER=m -CONFIG_CRYPTO_MANAGER=m -# CONFIG_CRYPTO_HMAC is not set -# CONFIG_CRYPTO_NULL is not set -# CONFIG_CRYPTO_MD4 is not set -CONFIG_CRYPTO_MD5=y -# CONFIG_CRYPTO_SHA1 is not set -# CONFIG_CRYPTO_SHA256 is not set -# CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set -# CONFIG_CRYPTO_TGR192 is not set -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=m -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set -# CONFIG_CRYPTO_AES is not set -# CONFIG_CRYPTO_CAST5 is not set -# CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set -# CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_TEST is not set - -# -# Hardware crypto devices -# - -# -# Library routines -# -# CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set -CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set -CONFIG_PLIST=y diff --git a/arch/sh/configs/r7785rp_defconfig b/arch/sh/configs/r7785rp_defconfig index 2e43a2a971a9..0dc1ce7b9349 100644 --- a/arch/sh/configs/r7785rp_defconfig +++ b/arch/sh/configs/r7785rp_defconfig @@ -1,9 +1,10 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24-rc2 -# Tue Nov 13 20:34:57 2007 +# Linux kernel version: 2.6.24-rc3 +# Fri Nov 23 14:03:57 2007 # CONFIG_SUPERH=y +CONFIG_SUPERH32=y CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_FIND_NEXT_BIT=y @@ -39,6 +40,7 @@ CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set # CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y @@ -130,6 +132,8 @@ CONFIG_CPU_SUBTYPE_SH7785=y # CONFIG_CPU_SUBTYPE_SHX3 is not set # CONFIG_CPU_SUBTYPE_SH7343 is not set # CONFIG_CPU_SUBTYPE_SH7722 is not set +# CONFIG_CPU_SUBTYPE_SH5_101 is not set +# CONFIG_CPU_SUBTYPE_SH5_103 is not set # # Memory management options @@ -139,7 +143,8 @@ CONFIG_MMU=y CONFIG_PAGE_OFFSET=0x80000000 CONFIG_MEMORY_START=0x08000000 CONFIG_MEMORY_SIZE=0x08000000 -# CONFIG_32BIT is not set +CONFIG_29BIT=y +# CONFIG_PMB is not set # CONFIG_X2TLB is not set CONFIG_VSYSCALL=y # CONFIG_NUMA is not set @@ -158,6 +163,7 @@ CONFIG_PAGE_SIZE_4KB=y CONFIG_HUGETLB_PAGE_SIZE_1MB=y # CONFIG_HUGETLB_PAGE_SIZE_4MB is not set # CONFIG_HUGETLB_PAGE_SIZE_64MB is not set +# CONFIG_HUGETLB_PAGE_SIZE_512MB is not set CONFIG_SELECT_MEMORY_MODEL=y # CONFIG_FLATMEM_MANUAL is not set # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -701,6 +707,7 @@ CONFIG_DEVPORT=y # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_I5K_AMB is not set # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_IT87 is not set diff --git a/arch/sh/configs/r7780rp_defconfig b/arch/sh/configs/sdk7780_defconfig index 12cc01910cf8..bb9bcd6591ab 100644 --- a/arch/sh/configs/r7780rp_defconfig +++ b/arch/sh/configs/sdk7780_defconfig @@ -1,9 +1,10 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.21-rc7 -# Tue May 1 12:28:39 2007 +# Linux kernel version: 2.6.24-rc7 +# Tue Jan 22 11:34:03 2008 # CONFIG_SUPERH=y +CONFIG_SUPERH32=y CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_FIND_NEXT_BIT=y @@ -11,149 +12,107 @@ CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_CALIBRATE_DELAY=y -# CONFIG_GENERIC_TIME is not set +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_SYS_SUPPORTS_PCI=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_NO_VIRT_TO_BUS=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION="_SDK7780" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set CONFIG_SYSVIPC_SYSCTL=y -# CONFIG_POSIX_MQUEUE is not set +CONFIG_POSIX_MQUEUE=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y -# CONFIG_SYSFS_DEPRECATED is not set -# CONFIG_RELAY is not set +CONFIG_LOG_BUF_SHIFT=18 +# CONFIG_CGROUPS is not set +CONFIG_FAIR_GROUP_SCHED=y +CONFIG_FAIR_USER_SCHED=y +# CONFIG_FAIR_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_RELAY=y # CONFIG_BLK_DEV_INITRD is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_UID16=y -# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_ALL is not set +CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y -# CONFIG_FUTEX is not set -# CONFIG_EPOLL is not set +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLUB_DEBUG=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y -# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y - -# -# Block layer -# CONFIG_BLOCK=y -# CONFIG_LBD is not set +CONFIG_LBD=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set # # IO Schedulers # CONFIG_IOSCHED_NOOP=y -# CONFIG_IOSCHED_AS is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -# CONFIG_DEFAULT_AS is not set +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set # CONFIG_DEFAULT_CFQ is not set -CONFIG_DEFAULT_NOOP=y -CONFIG_DEFAULT_IOSCHED="noop" +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" # # System type # -# CONFIG_SH_SOLUTION_ENGINE is not set -# CONFIG_SH_7722_SOLUTION_ENGINE is not set -# CONFIG_SH_7751_SOLUTION_ENGINE is not set -# CONFIG_SH_7780_SOLUTION_ENGINE is not set -# CONFIG_SH_7300_SOLUTION_ENGINE is not set -# CONFIG_SH_7343_SOLUTION_ENGINE is not set -# CONFIG_SH_73180_SOLUTION_ENGINE is not set -# CONFIG_SH_7751_SYSTEMH is not set -# CONFIG_SH_HP6XX is not set -# CONFIG_SH_SATURN is not set -# CONFIG_SH_DREAMCAST is not set -# CONFIG_SH_MPC1211 is not set -# CONFIG_SH_SH03 is not set -# CONFIG_SH_SECUREEDGE5410 is not set -# CONFIG_SH_HS7751RVOIP is not set -# CONFIG_SH_7710VOIPGW is not set -# CONFIG_SH_RTS7751R2D is not set -CONFIG_SH_HIGHLANDER=y -# CONFIG_SH_EDOSK7705 is not set -# CONFIG_SH_SH4202_MICRODEV is not set -# CONFIG_SH_LANDISK is not set -# CONFIG_SH_TITAN is not set -# CONFIG_SH_SHMIN is not set -# CONFIG_SH_7206_SOLUTION_ENGINE is not set -# CONFIG_SH_7619_SOLUTION_ENGINE is not set -# CONFIG_SH_LBOX_RE2 is not set -# CONFIG_SH_UNKNOWN is not set -CONFIG_SH_R7780RP=y -# CONFIG_SH_R7780MP is not set -# CONFIG_SH_R7785RP is not set - -# -# Processor selection -# CONFIG_CPU_SH4=y CONFIG_CPU_SH4A=y - -# -# SH-2 Processor Support -# -# CONFIG_CPU_SUBTYPE_SH7604 is not set # CONFIG_CPU_SUBTYPE_SH7619 is not set - -# -# SH-2A Processor Support -# +# CONFIG_CPU_SUBTYPE_SH7203 is not set # CONFIG_CPU_SUBTYPE_SH7206 is not set - -# -# SH-3 Processor Support -# -# CONFIG_CPU_SUBTYPE_SH7300 is not set +# CONFIG_CPU_SUBTYPE_SH7263 is not set # CONFIG_CPU_SUBTYPE_SH7705 is not set # CONFIG_CPU_SUBTYPE_SH7706 is not set # CONFIG_CPU_SUBTYPE_SH7707 is not set @@ -161,10 +120,8 @@ CONFIG_CPU_SH4A=y # CONFIG_CPU_SUBTYPE_SH7709 is not set # CONFIG_CPU_SUBTYPE_SH7710 is not set # CONFIG_CPU_SUBTYPE_SH7712 is not set - -# -# SH-4 Processor Support -# +# CONFIG_CPU_SUBTYPE_SH7720 is not set +# CONFIG_CPU_SUBTYPE_SH7721 is not set # CONFIG_CPU_SUBTYPE_SH7750 is not set # CONFIG_CPU_SUBTYPE_SH7091 is not set # CONFIG_CPU_SUBTYPE_SH7750R is not set @@ -173,38 +130,33 @@ CONFIG_CPU_SH4A=y # CONFIG_CPU_SUBTYPE_SH7751R is not set # CONFIG_CPU_SUBTYPE_SH7760 is not set # CONFIG_CPU_SUBTYPE_SH4_202 is not set - -# -# ST40 Processor Support -# -# CONFIG_CPU_SUBTYPE_ST40STB1 is not set -# CONFIG_CPU_SUBTYPE_ST40GX1 is not set - -# -# SH-4A Processor Support -# +# CONFIG_CPU_SUBTYPE_SH7763 is not set # CONFIG_CPU_SUBTYPE_SH7770 is not set CONFIG_CPU_SUBTYPE_SH7780=y # CONFIG_CPU_SUBTYPE_SH7785 is not set - -# -# SH4AL-DSP Processor Support -# -# CONFIG_CPU_SUBTYPE_SH73180 is not set +# CONFIG_CPU_SUBTYPE_SHX3 is not set # CONFIG_CPU_SUBTYPE_SH7343 is not set # CONFIG_CPU_SUBTYPE_SH7722 is not set +# CONFIG_CPU_SUBTYPE_SH5_101 is not set +# CONFIG_CPU_SUBTYPE_SH5_103 is not set # # Memory management options # +CONFIG_QUICKLIST=y CONFIG_MMU=y CONFIG_PAGE_OFFSET=0x80000000 CONFIG_MEMORY_START=0x08000000 CONFIG_MEMORY_SIZE=0x08000000 -# CONFIG_32BIT is not set +CONFIG_29BIT=y +# CONFIG_PMB is not set CONFIG_VSYSCALL=y CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_DEFAULT=y +CONFIG_MAX_ACTIVE_REGIONS=1 CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_64KB is not set @@ -213,23 +165,27 @@ CONFIG_HUGETLB_PAGE_SIZE_64K=y # CONFIG_HUGETLB_PAGE_SIZE_1MB is not set # CONFIG_HUGETLB_PAGE_SIZE_4MB is not set # CONFIG_HUGETLB_PAGE_SIZE_64MB is not set +# CONFIG_HUGETLB_PAGE_SIZE_512MB is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPARSEMEM_STATIC=y +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set +CONFIG_RESOURCES_64BIT=y CONFIG_ZONE_DMA_FLAG=0 +CONFIG_NR_QUICK=2 # # Cache configuration # # CONFIG_SH_DIRECT_MAPPED is not set -# CONFIG_SH_WRITETHROUGH is not set -# CONFIG_SH_OCRAM is not set +CONFIG_CACHE_WRITEBACK=y +# CONFIG_CACHE_WRITETHROUGH is not set +# CONFIG_CACHE_OFF is not set # # Processor features @@ -237,20 +193,31 @@ CONFIG_ZONE_DMA_FLAG=0 CONFIG_CPU_LITTLE_ENDIAN=y # CONFIG_CPU_BIG_ENDIAN is not set CONFIG_SH_FPU=y -# CONFIG_SH_DSP is not set CONFIG_SH_STORE_QUEUES=y -CONFIG_SPECULATIVE_EXECUTION=y +# CONFIG_SPECULATIVE_EXECUTION is not set CONFIG_CPU_HAS_INTEVT=y -CONFIG_CPU_HAS_INTC_IRQ=y CONFIG_CPU_HAS_SR_RB=y +CONFIG_CPU_HAS_FPU=y + +# +# Board support +# +# CONFIG_SH_7780_SOLUTION_ENGINE is not set +CONFIG_SH_SDK7780=y +# CONFIG_SH_HIGHLANDER is not set +# CONFIG_SH_SDK7780_STANDALONE is not set +CONFIG_SH_SDK7780_BASE=y # # Timer and clock configuration # CONFIG_SH_TMU=y CONFIG_SH_TIMER_IRQ=28 -CONFIG_NO_IDLE_HZ=y -CONFIG_SH_PCLK_FREQ=32000000 +CONFIG_SH_PCLK_FREQ=33333333 +CONFIG_TICK_ONESHOT=y +# CONFIG_NO_HZ is not set +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # # CPU Frequency scaling @@ -260,18 +227,20 @@ CONFIG_SH_PCLK_FREQ=32000000 # # DMA support # -# CONFIG_SH_DMA is not set +CONFIG_SH_DMA_API=y +CONFIG_SH_DMA=y +CONFIG_NR_ONCHIP_DMA_CHANNELS=12 +# CONFIG_NR_DMA_CHANNELS_BOOL is not set # # Companion Chips # -# CONFIG_HD6446X_SERIES is not set # # Additional SuperH Device Drivers # -# CONFIG_HEARTBEAT is not set -CONFIG_PUSH_SWITCH=y +CONFIG_HEARTBEAT=y +# CONFIG_PUSH_SWITCH is not set # # Kernel features @@ -281,22 +250,21 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 -CONFIG_KEXEC=y +# CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set -# CONFIG_SMP is not set # CONFIG_PREEMPT_NONE is not set # CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y CONFIG_PREEMPT_BKL=y +CONFIG_GUSA=y # # Boot options # CONFIG_ZERO_PAGE_OFFSET=0x00001000 -CONFIG_BOOT_LINK_OFFSET=0x00800000 -# CONFIG_UBC_WAKEUP is not set +CONFIG_BOOT_LINK_OFFSET=0x01800000 CONFIG_CMDLINE_BOOL=y -CONFIG_CMDLINE="mem=128M console=ttySC0,115200 root=/dev/sda1" +CONFIG_CMDLINE="mem=128M console=tty0 console=ttySC0,115200 ip=bootp root=/dev/nfs nfsroot=192.168.0.1:/home/rootfs" # # Bus options @@ -305,31 +273,40 @@ CONFIG_PCI=y CONFIG_SH_PCIDMA_NONCOHERENT=y CONFIG_PCI_AUTO=y CONFIG_PCI_AUTO_UPDATE_RESOURCES=y -# CONFIG_PCI_DEBUG is not set - -# -# PCCARD (PCMCIA/CardBus) support -# -# CONFIG_PCCARD is not set - -# -# PCI Hotplug Support -# -# CONFIG_HOTPLUG_PCI is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCI_LEGACY is not set +CONFIG_PCI_DEBUG=y +CONFIG_PCCARD=y +# CONFIG_PCMCIA_DEBUG is not set +CONFIG_PCMCIA=y +CONFIG_PCMCIA_LOAD_CIS=y +CONFIG_PCMCIA_IOCTL=y +CONFIG_CARDBUS=y + +# +# PC-card bridges +# +CONFIG_YENTA=y +CONFIG_YENTA_O2=y +CONFIG_YENTA_RICOH=y +CONFIG_YENTA_TI=y +CONFIG_YENTA_ENE_TUNE=y +CONFIG_YENTA_TOSHIBA=y +# CONFIG_PD6729 is not set +# CONFIG_I82092 is not set +CONFIG_PCCARD_NONSTATIC=y +CONFIG_HOTPLUG_PCI=y +# CONFIG_HOTPLUG_PCI_FAKE is not set +# CONFIG_HOTPLUG_PCI_CPCI is not set +# CONFIG_HOTPLUG_PCI_SHPC is not set # # Executable file formats # CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_FLAT is not set # CONFIG_BINFMT_MISC is not set # -# Power management options (EXPERIMENTAL) -# -# CONFIG_PM is not set - -# # Networking # CONFIG_NET=y @@ -337,7 +314,6 @@ CONFIG_NET=y # # Networking options # -# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -347,7 +323,7 @@ CONFIG_XFRM=y # CONFIG_XFRM_MIGRATE is not set # CONFIG_NET_KEY is not set CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set +CONFIG_IP_MULTICAST=y CONFIG_IP_ADVANCED_ROUTER=y CONFIG_ASK_IP_FIB_HASH=y # CONFIG_IP_FIB_TRIE is not set @@ -356,52 +332,55 @@ CONFIG_IP_FIB_HASH=y # CONFIG_IP_ROUTE_MULTIPATH is not set # CONFIG_IP_ROUTE_VERBOSE is not set CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_DHCP is not set +CONFIG_IP_PNP_BOOTP=y # CONFIG_IP_PNP_RARP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set # CONFIG_ARPD is not set # CONFIG_SYN_COOKIES is not set # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set -# CONFIG_INET_TUNNEL is not set +CONFIG_INET_TUNNEL=y CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y -CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set -# CONFIG_IPV6 is not set +CONFIG_IPV6=y +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_IPV6_OPTIMISTIC_DAD is not set +# CONFIG_INET6_AH is not set +# CONFIG_INET6_ESP is not set +# CONFIG_INET6_IPCOMP is not set +# CONFIG_IPV6_MIP6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set +CONFIG_INET6_XFRM_MODE_TRANSPORT=y +CONFIG_INET6_XFRM_MODE_TUNNEL=y +# CONFIG_INET6_XFRM_MODE_BEET is not set +# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set +CONFIG_IPV6_SIT=y +# CONFIG_IPV6_TUNNEL is not set +# CONFIG_IPV6_MULTIPLE_TABLES is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# # CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# # CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# # CONFIG_TIPC is not set # CONFIG_ATM is not set -CONFIG_BRIDGE=m +# CONFIG_BRIDGE is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set -CONFIG_LLC=m # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set @@ -409,11 +388,39 @@ CONFIG_LLC=m # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +CONFIG_NET_SCHED=y + +# +# Queueing/Scheduling +# +# CONFIG_NET_SCH_CBQ is not set +# CONFIG_NET_SCH_HTB is not set +# CONFIG_NET_SCH_HFSC is not set +# CONFIG_NET_SCH_PRIO is not set +# CONFIG_NET_SCH_RR is not set +# CONFIG_NET_SCH_RED is not set +# CONFIG_NET_SCH_SFQ is not set +# CONFIG_NET_SCH_TEQL is not set +# CONFIG_NET_SCH_TBF is not set +# CONFIG_NET_SCH_GRED is not set +# CONFIG_NET_SCH_DSMARK is not set +# CONFIG_NET_SCH_NETEM is not set +# CONFIG_NET_SCH_INGRESS is not set # -# QoS and/or fair queueing +# Classification # -# CONFIG_NET_SCHED is not set +# CONFIG_NET_CLS_BASIC is not set +# CONFIG_NET_CLS_TCINDEX is not set +# CONFIG_NET_CLS_ROUTE4 is not set +# CONFIG_NET_CLS_FW is not set +# CONFIG_NET_CLS_U32 is not set +# CONFIG_NET_CLS_RSVP is not set +# CONFIG_NET_CLS_RSVP6 is not set +# CONFIG_NET_EMATCH is not set +# CONFIG_NET_CLS_ACT is not set +# CONFIG_NET_CLS_POLICE is not set +CONFIG_NET_SCH_FIFO=y # # Network testing @@ -422,8 +429,17 @@ CONFIG_LLC=m # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set -CONFIG_WIRELESS_EXT=y +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -432,69 +448,108 @@ CONFIG_WIRELESS_EXT=y # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=m +CONFIG_FW_LOADER=y # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# # CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# # CONFIG_MTD is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# -# CONFIG_PNPACPI is not set - -# -# Block devices -# -# CONFIG_BLK_CPQ_DA is not set +CONFIG_PARPORT=y +# CONFIG_PARPORT_PC is not set +# CONFIG_PARPORT_GSC is not set +# CONFIG_PARPORT_AX88796 is not set +# CONFIG_PARPORT_1284 is not set +CONFIG_BLK_DEV=y # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set -# CONFIG_BLK_DEV_LOOP is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set - -# -# Misc devices -# -# CONFIG_SGI_IOC4 is not set -# CONFIG_TIFM_CORE is not set - -# -# ATA/ATAPI/MFM/RLL support -# -# CONFIG_IDE is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_IDE=y +CONFIG_IDE_MAX_HWIFS=4 +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=y +CONFIG_IDEDISK_MULTI_MODE=y +# CONFIG_BLK_DEV_IDECS is not set +# CONFIG_BLK_DEV_DELKIN is not set +CONFIG_BLK_DEV_IDECD=y +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +# CONFIG_BLK_DEV_IDESCSI is not set +# CONFIG_IDE_TASK_IOCTL is not set +CONFIG_IDE_PROC_FS=y + +# +# IDE chipset support/bugfixes +# +CONFIG_IDE_GENERIC=y +CONFIG_BLK_DEV_PLATFORM=y + +# +# PCI IDE chipsets support +# +CONFIG_BLK_DEV_IDEPCI=y +# CONFIG_IDEPCI_SHARE_IRQ is not set +CONFIG_IDEPCI_PCIBUS_ORDER=y +# CONFIG_BLK_DEV_OFFBOARD is not set +CONFIG_BLK_DEV_GENERIC=y +# CONFIG_BLK_DEV_OPTI621 is not set +# CONFIG_BLK_DEV_AEC62XX is not set +# CONFIG_BLK_DEV_ALI15X3 is not set +# CONFIG_BLK_DEV_AMD74XX is not set +# CONFIG_BLK_DEV_CMD64X is not set +# CONFIG_BLK_DEV_TRIFLEX is not set +# CONFIG_BLK_DEV_CY82C693 is not set +# CONFIG_BLK_DEV_CS5520 is not set +# CONFIG_BLK_DEV_CS5530 is not set +# CONFIG_BLK_DEV_HPT34X is not set +# CONFIG_BLK_DEV_HPT366 is not set +# CONFIG_BLK_DEV_JMICRON is not set +# CONFIG_BLK_DEV_SC1200 is not set +# CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT8213 is not set +# CONFIG_BLK_DEV_IT821X is not set +# CONFIG_BLK_DEV_NS87415 is not set +# CONFIG_BLK_DEV_PDC202XX_OLD is not set +# CONFIG_BLK_DEV_PDC202XX_NEW is not set +# CONFIG_BLK_DEV_SVWKS is not set +# CONFIG_BLK_DEV_SIIMAGE is not set +# CONFIG_BLK_DEV_SLC90E66 is not set +# CONFIG_BLK_DEV_TRM290 is not set +# CONFIG_BLK_DEV_VIA82CXXX is not set +# CONFIG_BLK_DEV_TC86C001 is not set +# CONFIG_IDE_ARM is not set +# CONFIG_BLK_DEV_IDEDMA is not set +# CONFIG_IDE_ARCH_OBSOLETE_INIT is not set +# CONFIG_BLK_DEV_HD is not set # # SCSI device support # # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y +CONFIG_SCSI_DMA=y # CONFIG_SCSI_TGT is not set -# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_NETLINK=y CONFIG_SCSI_PROC_FS=y # @@ -503,8 +558,9 @@ CONFIG_SCSI_PROC_FS=y CONFIG_BLK_DEV_SD=y # CONFIG_CHR_DEV_ST is not set # CONFIG_CHR_DEV_OSST is not set -# CONFIG_BLK_DEV_SR is not set -CONFIG_CHR_DEV_SG=m +CONFIG_BLK_DEV_SR=y +# CONFIG_BLK_DEV_SR_VENDOR is not set +CONFIG_CHR_DEV_SG=y # CONFIG_CHR_DEV_SCH is not set # @@ -514,19 +570,17 @@ CONFIG_CHR_DEV_SG=m # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set # CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m # # SCSI Transports # -# CONFIG_SCSI_SPI_ATTRS is not set -# CONFIG_SCSI_FC_ATTRS is not set +CONFIG_SCSI_SPI_ATTRS=y +CONFIG_SCSI_FC_ATTRS=y # CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set - -# -# SCSI low-level drivers -# +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set @@ -536,7 +590,6 @@ CONFIG_CHR_DEV_SG=m # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set -# CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_ARCMSR is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set @@ -559,10 +612,7 @@ CONFIG_CHR_DEV_SG=m # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# +# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set # CONFIG_SATA_AHCI is not set @@ -574,7 +624,7 @@ CONFIG_ATA=y # CONFIG_SATA_QSTOR is not set # CONFIG_SATA_PROMISE is not set # CONFIG_SATA_SX4 is not set -CONFIG_SATA_SIL=y +# CONFIG_SATA_SIL is not set # CONFIG_SATA_SIL24 is not set # CONFIG_SATA_SIS is not set # CONFIG_SATA_ULI is not set @@ -585,6 +635,7 @@ CONFIG_SATA_SIL=y # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set # CONFIG_PATA_ATIIXP is not set +# CONFIG_PATA_CMD640_PCI is not set # CONFIG_PATA_CMD64X is not set # CONFIG_PATA_CS5520 is not set # CONFIG_PATA_CS5530 is not set @@ -604,8 +655,10 @@ CONFIG_SATA_SIL=y # CONFIG_PATA_OLDPIIX is not set # CONFIG_PATA_NETCELL is not set # CONFIG_PATA_NS87410 is not set +# CONFIG_PATA_NS87415 is not set # CONFIG_PATA_OPTI is not set # CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PCMCIA is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set # CONFIG_PATA_RZ1000 is not set @@ -616,185 +669,87 @@ CONFIG_SATA_SIL=y # CONFIG_PATA_SIS is not set # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set -CONFIG_PATA_PLATFORM=y - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# Fusion MPT device support -# +# CONFIG_PATA_PLATFORM is not set +CONFIG_MD=y +# CONFIG_BLK_DEV_MD is not set +CONFIG_BLK_DEV_DM=y +# CONFIG_DM_DEBUG is not set +# CONFIG_DM_CRYPT is not set +# CONFIG_DM_SNAPSHOT is not set +# CONFIG_DM_MIRROR is not set +# CONFIG_DM_ZERO is not set +# CONFIG_DM_MULTIPATH is not set +# CONFIG_DM_DELAY is not set +# CONFIG_DM_UEVENT is not set # CONFIG_FUSION is not set -# CONFIG_FUSION_SPI is not set -# CONFIG_FUSION_FC is not set -# CONFIG_FUSION_SAS is not set # # IEEE 1394 (FireWire) support # +# CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set - -# -# I2O device support -# # CONFIG_I2O is not set - -# -# Network device support -# CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set - -# -# ARCnet devices -# +# CONFIG_VETH is not set # CONFIG_ARCNET is not set - -# -# PHY device support -# # CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# CONFIG_NET_ETHERNET=y CONFIG_MII=y +# CONFIG_AX88796 is not set # CONFIG_STNIC is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set -# CONFIG_SMC91X is not set - -# -# Tulip family network device support -# +CONFIG_SMC91X=y # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set -CONFIG_NET_PCI=y -CONFIG_PCNET32=m -# CONFIG_PCNET32_NAPI is not set -# CONFIG_AMD8111_ETH is not set -# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_NET_PCI is not set # CONFIG_B44 is not set -# CONFIG_FORCEDETH is not set -# CONFIG_DGRS is not set -# CONFIG_EEPRO100 is not set -# CONFIG_E100 is not set -# CONFIG_FEALNX is not set -# CONFIG_NATSEMI is not set -# CONFIG_NE2K_PCI is not set -CONFIG_8139CP=m -CONFIG_8139TOO=m -# CONFIG_8139TOO_PIO is not set -# CONFIG_8139TOO_TUNE_TWISTER is not set -CONFIG_8139TOO_8129=y -# CONFIG_8139_OLD_RX_RESET is not set -# CONFIG_SIS900 is not set -# CONFIG_EPIC100 is not set -# CONFIG_SUNDANCE is not set -# CONFIG_TLAN is not set -CONFIG_VIA_RHINE=m -CONFIG_VIA_RHINE_MMIO=y -# CONFIG_VIA_RHINE_NAPI is not set -# CONFIG_SC92031 is not set - -# -# Ethernet (1000 Mbit) -# -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -CONFIG_E1000=m -# CONFIG_E1000_NAPI is not set -# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -CONFIG_R8169=y -# CONFIG_R8169_NAPI is not set -# CONFIG_SIS190 is not set -# CONFIG_SKGE is not set -# CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set -# CONFIG_VIA_VELOCITY is not set -# CONFIG_TIGON3 is not set -# CONFIG_BNX2 is not set -# CONFIG_QLA3XXX is not set -# CONFIG_ATL1 is not set - -# -# Ethernet (10000 Mbit) -# -# CONFIG_CHELSIO_T1 is not set -# CONFIG_CHELSIO_T3 is not set -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set -# CONFIG_MYRI10GE is not set -# CONFIG_NETXEN_NIC is not set - -# -# Token Ring devices -# +# CONFIG_NET_POCKET is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set # -# Wireless LAN (non-hamradio) -# -CONFIG_NET_RADIO=y -# CONFIG_NET_WIRELESS_RTNETLINK is not set - -# -# Obsolete Wireless cards support (pre-802.11) -# -# CONFIG_STRIP is not set - -# -# Wireless 802.11b ISA/PCI cards support -# -# CONFIG_IPW2100 is not set -# CONFIG_IPW2200 is not set -CONFIG_HERMES=m -# CONFIG_PLX_HERMES is not set -# CONFIG_TMD_HERMES is not set -# CONFIG_NORTEL_HERMES is not set -# CONFIG_PCI_HERMES is not set -# CONFIG_ATMEL is not set - -# -# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support +# Wireless LAN # -CONFIG_PRISM54=m -# CONFIG_HOSTAP is not set -CONFIG_NET_WIRELESS=y +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set # -# Wan interfaces +# USB Network Adapters # +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_NET_PCMCIA is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set +# CONFIG_PLIP is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_NET_FC is not set # CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# +CONFIG_NETCONSOLE=y +# CONFIG_NETCONSOLE_DYNAMIC is not set +CONFIG_NETPOLL=y +# CONFIG_NETPOLL_TRAP is not set +CONFIG_NET_POLL_CONTROLLER=y # CONFIG_ISDN is not set - -# -# Telephony Support -# # CONFIG_PHONE is not set # @@ -802,17 +757,17 @@ CONFIG_NET_WIRELESS=y # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces # CONFIG_INPUT_MOUSEDEV=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set +CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set # @@ -825,8 +780,19 @@ CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set # CONFIG_KEYBOARD_STOWAWAY is not set -# CONFIG_INPUT_MOUSE is not set +CONFIG_INPUT_MOUSE=y +CONFIG_MOUSE_PS2=y +CONFIG_MOUSE_PS2_ALPS=y +CONFIG_MOUSE_PS2_LOGIPS2PP=y +CONFIG_MOUSE_PS2_SYNAPTICS=y +CONFIG_MOUSE_PS2_LIFEBOOK=y +CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_TOUCHKIT is not set +# CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_APPLETOUCH is not set +# CONFIG_MOUSE_VSXXXAA is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set @@ -836,6 +802,7 @@ CONFIG_KEYBOARD_ATKBD=y CONFIG_SERIO=y # CONFIG_SERIO_I8042 is not set # CONFIG_SERIO_SERPORT is not set +# CONFIG_SERIO_PARKBD is not set # CONFIG_SERIO_PCIPS2 is not set CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_RAW is not set @@ -844,7 +811,10 @@ CONFIG_SERIO_LIBPS2=y # # Character devices # -# CONFIG_VT is not set +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set # CONFIG_SERIAL_NONSTANDARD is not set # @@ -864,32 +834,22 @@ CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# +# CONFIG_PRINTER is not set +# CONFIG_PPDEV is not set # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set CONFIG_HW_RANDOM=y -# CONFIG_GEN_RTC is not set -# CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set -# CONFIG_DRM is not set -# CONFIG_RAW_DRIVER is not set # -# TPM devices +# PCMCIA character devices # +# CONFIG_SYNCLINK_CS is not set +# CONFIG_CARDMAN_4000 is not set +# CONFIG_CARDMAN_4040 is not set +# CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set - -# -# I2C support -# +CONFIG_DEVPORT=y # CONFIG_I2C is not set # @@ -897,22 +857,27 @@ CONFIG_HW_RANDOM=y # # CONFIG_SPI is not set # CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# # CONFIG_W1 is not set +CONFIG_POWER_SUPPLY=y +# CONFIG_POWER_SUPPLY_DEBUG is not set +# CONFIG_PDA_POWER is not set +# CONFIG_BATTERY_DS2760 is not set +# CONFIG_HWMON is not set +# CONFIG_WATCHDOG is not set # -# Hardware Monitoring support +# Sonics Silicon Backplane # -CONFIG_HWMON=y -# CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_ABITUGURU is not set -# CONFIG_SENSORS_F71805F is not set -# CONFIG_SENSORS_PC87427 is not set -# CONFIG_SENSORS_VT1211 is not set -# CONFIG_HWMON_DEBUG_CHIP is not set +CONFIG_SSB_POSSIBLE=y +CONFIG_SSB=y +CONFIG_SSB_PCIHOST_POSSIBLE=y +CONFIG_SSB_PCIHOST=y +CONFIG_SSB_PCMCIAHOST_POSSIBLE=y +# CONFIG_SSB_PCMCIAHOST is not set +# CONFIG_SSB_SILENT is not set +# CONFIG_SSB_DEBUG is not set +CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y +CONFIG_SSB_DRIVER_PCICORE=y # # Multifunction device drivers @@ -923,22 +888,93 @@ CONFIG_HWMON=y # Multimedia devices # # CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_DRM is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_CFB_FILLRECT is not set +# CONFIG_FB_CFB_COPYAREA is not set +# CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_CIRRUS is not set +# CONFIG_FB_PM2 is not set +# CONFIG_FB_CYBER2000 is not set +# CONFIG_FB_ASILIANT is not set +# CONFIG_FB_IMSTT is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_NVIDIA is not set +# CONFIG_FB_RIVA is not set +# CONFIG_FB_MATROX is not set +# CONFIG_FB_RADEON is not set +# CONFIG_FB_ATY128 is not set +# CONFIG_FB_ATY is not set +# CONFIG_FB_S3 is not set +# CONFIG_FB_SAVAGE is not set +# CONFIG_FB_SIS is not set +# CONFIG_FB_NEOMAGIC is not set +# CONFIG_FB_KYRO is not set +# CONFIG_FB_3DFX is not set +# CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_VT8623 is not set +# CONFIG_FB_TRIDENT is not set +# CONFIG_FB_ARK is not set +# CONFIG_FB_PM3 is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # -# Digital Video Broadcasting Devices +# Display device support # -# CONFIG_DVB is not set +CONFIG_DISPLAY_SUPPORT=y # -# Graphics support +# Display hardware drivers # -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set -# CONFIG_FB is not set + +# +# Console display driver support +# +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +CONFIG_LOGO=y +CONFIG_LOGO_LINUX_MONO=y +CONFIG_LOGO_LINUX_VGA16=y +CONFIG_LOGO_LINUX_CLUT224=y +CONFIG_LOGO_SUPERH_MONO=y +CONFIG_LOGO_SUPERH_VGA16=y +CONFIG_LOGO_SUPERH_CLUT224=y # # Sound # -CONFIG_SOUND=m +CONFIG_SOUND=y # # Advanced Linux Sound Architecture @@ -948,126 +984,162 @@ CONFIG_SOUND=m # # Open Sound System # -CONFIG_SOUND_PRIME=m -# CONFIG_OBSOLETE_OSS is not set -# CONFIG_SOUND_BT878 is not set -# CONFIG_SOUND_ICH is not set +CONFIG_SOUND_PRIME=y # CONFIG_SOUND_TRIDENT is not set # CONFIG_SOUND_MSNDCLAS is not set # CONFIG_SOUND_MSNDPIN is not set -# CONFIG_SOUND_VIA82CXXX is not set - -# -# HID Devices -# +CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set # -# USB support +# USB Input Devices # +CONFIG_USB_HID=y +# CONFIG_USB_HIDINPUT_POWERBOOK is not set +# CONFIG_HID_FF is not set +# CONFIG_USB_HIDDEV is not set +CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y -# CONFIG_USB is not set +CONFIG_USB=y +CONFIG_USB_DEBUG=y # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# Miscellaneous USB options # +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_DEVICE_CLASS is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set # -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# LED devices +# USB Host Controller Drivers # -# CONFIG_NEW_LEDS is not set +CONFIG_USB_EHCI_HCD=y +# CONFIG_USB_EHCI_SPLIT_ISO is not set +# CONFIG_USB_EHCI_ROOT_HUB_TT is not set +# CONFIG_USB_EHCI_TT_NEWSCHED is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_OHCI_HCD is not set +# CONFIG_USB_UHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set # -# LED drivers +# USB Device Class drivers # +# CONFIG_USB_ACM is not set +CONFIG_USB_PRINTER=y # -# LED Triggers +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # # -# InfiniBand support +# may also be needed; see USB_STORAGE Help for more information # -# CONFIG_INFINIBAND is not set +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_LIBUSUAL is not set # -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# USB Imaging devices # +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set +CONFIG_USB_MON=y # -# Real Time Clock +# USB port drivers # -CONFIG_RTC_LIB=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_HCTOSYS=y -CONFIG_RTC_HCTOSYS_DEVICE="rtc0" -# CONFIG_RTC_DEBUG is not set +# CONFIG_USB_USS720 is not set # -# RTC interfaces +# USB Serial Converter support # -CONFIG_RTC_INTF_SYSFS=y -CONFIG_RTC_INTF_PROC=y -CONFIG_RTC_INTF_DEV=y -# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_USB_SERIAL is not set # -# RTC drivers +# USB Miscellaneous drivers # -# CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_DS1742 is not set -# CONFIG_RTC_DRV_M48T86 is not set -CONFIG_RTC_DRV_SH=y -# CONFIG_RTC_DRV_TEST is not set -# CONFIG_RTC_DRV_V3020 is not set +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set # -# DMA Engine support +# USB DSL modem support # -# CONFIG_DMA_ENGINE is not set # -# DMA Clients +# USB Gadget Support # +# CONFIG_USB_GADGET is not set +# CONFIG_MMC is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y # -# DMA Devices +# LED drivers # # -# Auxiliary Display support +# LED Triggers # +# CONFIG_LEDS_TRIGGERS is not set +# CONFIG_INFINIBAND is not set +# CONFIG_RTC_CLASS is not set +# CONFIG_AUXDISPLAY is not set # -# Virtualization +# Userspace I/O # +# CONFIG_UIO is not set # # File systems # CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT2_FS_POSIX_ACL=y +# CONFIG_EXT2_FS_SECURITY is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y -# CONFIG_EXT3_FS_POSIX_ACL is not set +CONFIG_EXT3_FS_POSIX_ACL=y # CONFIG_EXT3_FS_SECURITY is not set # CONFIG_EXT4DEV_FS is not set CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set @@ -1082,13 +1154,16 @@ CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -CONFIG_FUSE_FS=m +CONFIG_AUTOFS4_FS=y +# CONFIG_FUSE_FS is not set +CONFIG_GENERIC_ACL=y # # CD-ROM/DVD Filesystems # -# CONFIG_ISO9660_FS is not set +CONFIG_ISO9660_FS=y +# CONFIG_JOLIET is not set +# CONFIG_ZISOFS is not set # CONFIG_UDF_FS is not set # @@ -1100,22 +1175,21 @@ CONFIG_VFAT_FS=y CONFIG_FAT_DEFAULT_CODEPAGE=437 CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_NTFS_FS=y -# CONFIG_NTFS_DEBUG is not set +CONFIG_NTFS_DEBUG=y CONFIG_NTFS_RW=y # # Pseudo filesystems # CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y +# CONFIG_PROC_KCORE is not set CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y CONFIG_TMPFS=y -# CONFIG_TMPFS_POSIX_ACL is not set +CONFIG_TMPFS_POSIX_ACL=y CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y -CONFIG_RAMFS=y -CONFIG_CONFIGFS_FS=m +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -1133,19 +1207,16 @@ CONFIG_CONFIGFS_FS=m # CONFIG_QNX4FS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set -CONFIG_NFS_V4=y +# CONFIG_NFS_V4 is not set # CONFIG_NFS_DIRECTIO is not set CONFIG_NFSD=y CONFIG_NFSD_V3=y # CONFIG_NFSD_V3_ACL is not set -CONFIG_NFSD_V4=y +# CONFIG_NFSD_V4 is not set CONFIG_NFSD_TCP=y CONFIG_ROOT_NFS=y CONFIG_LOCKD=y @@ -1153,25 +1224,20 @@ CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -CONFIG_SUNRPC_GSS=y -CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=y @@ -1191,13 +1257,13 @@ CONFIG_NLS_CODEPAGE_437=y # CONFIG_NLS_CODEPAGE_869 is not set # CONFIG_NLS_CODEPAGE_936 is not set # CONFIG_NLS_CODEPAGE_950 is not set -CONFIG_NLS_CODEPAGE_932=y +# CONFIG_NLS_CODEPAGE_932 is not set # CONFIG_NLS_CODEPAGE_949 is not set # CONFIG_NLS_CODEPAGE_874 is not set # CONFIG_NLS_ISO8859_8 is not set # CONFIG_NLS_CODEPAGE_1250 is not set # CONFIG_NLS_CODEPAGE_1251 is not set -# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ASCII=y CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set @@ -1208,44 +1274,39 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_ISO8859_9 is not set # CONFIG_NLS_ISO8859_13 is not set # CONFIG_NLS_ISO8859_14 is not set -# CONFIG_NLS_ISO8859_15 is not set +CONFIG_NLS_ISO8859_15=y # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set -# CONFIG_NLS_UTF8 is not set - -# -# Distributed Lock Manager -# +CONFIG_NLS_UTF8=y # CONFIG_DLM is not set - -# -# Profiling support -# -CONFIG_PROFILING=y -CONFIG_OPROFILE=m +# CONFIG_INSTRUMENTATION is not set # # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set -CONFIG_ENABLE_MUST_CHECK=y +CONFIG_ENABLE_WARN_DEPRECATED=y +# CONFIG_ENABLE_MUST_CHECK is not set CONFIG_MAGIC_SYSRQ=y -# CONFIG_UNUSED_SYMBOLS is not set -CONFIG_DEBUG_FS=y +CONFIG_UNUSED_SYMBOLS=y +# CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set -CONFIG_LOG_BUF_SHIFT=14 CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHED_DEBUG is not set # CONFIG_SCHEDSTATS is not set -# CONFIG_TIMER_STATS is not set -# CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_PREEMPT is not set +CONFIG_TIMER_STATS=y +# CONFIG_SLUB_DEBUG_ON is not set +CONFIG_DEBUG_PREEMPT=y +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set # CONFIG_DEBUG_LOCK_ALLOC is not set # CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set @@ -1253,16 +1314,21 @@ CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set # CONFIG_FRAME_POINTER is not set -CONFIG_FORCED_INLINING=y +# CONFIG_FORCED_INLINING is not set +# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_SAMPLES is not set CONFIG_SH_STANDARD_BIOS=y # CONFIG_EARLY_SCIF_CONSOLE is not set -CONFIG_EARLY_PRINTK=y +# CONFIG_EARLY_PRINTK is not set +# CONFIG_DEBUG_BOOTMEM is not set CONFIG_DEBUG_STACKOVERFLOW=y # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_4KSTACKS is not set +# CONFIG_IRQSTACKS is not set # CONFIG_SH_KGDB is not set # @@ -1270,16 +1336,11 @@ CONFIG_DEBUG_STACKOVERFLOW=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set - -# -# Cryptographic options -# +# CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_BLKCIPHER=y -CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_MANAGER=y -CONFIG_CRYPTO_HMAC=y +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_MD4 is not set @@ -1290,10 +1351,12 @@ CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set # CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_PCBC is not set # CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_XTS is not set +# CONFIG_CRYPTO_CRYPTD is not set CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_BLOWFISH is not set @@ -1306,15 +1369,14 @@ CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_ARC4 is not set # CONFIG_CRYPTO_KHAZAD is not set # CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_TEST is not set - -# -# Hardware crypto devices -# +# CONFIG_CRYPTO_AUTHENC is not set +CONFIG_CRYPTO_HW=y # # Library routines @@ -1322,7 +1384,11 @@ CONFIG_CRYPTO_DES=y CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set +CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/sh/configs/se7712_defconfig b/arch/sh/configs/se7712_defconfig index a5e37dbc5353..240a1cef69aa 100644 --- a/arch/sh/configs/se7712_defconfig +++ b/arch/sh/configs/se7712_defconfig @@ -237,7 +237,7 @@ CONFIG_CPU_HAS_SR_RB=y CONFIG_SH_TMU=y CONFIG_SH_TIMER_IRQ=16 # CONFIG_NO_IDLE_HZ is not set -CONFIG_SH_PCLK_FREQ=33333333 +CONFIG_SH_PCLK_FREQ=66666666 # # CPU Frequency scaling diff --git a/arch/sh/drivers/dma/Kconfig b/arch/sh/drivers/dma/Kconfig index 4e711a0c3dae..01936368b8b0 100644 --- a/arch/sh/drivers/dma/Kconfig +++ b/arch/sh/drivers/dma/Kconfig @@ -12,7 +12,7 @@ config SH_DMA config NR_ONCHIP_DMA_CHANNELS int depends on SH_DMA - default "6" if CPU_SUBTYPE_SH7720 + default "6" if CPU_SUBTYPE_SH7720 || CPU_SUBTYPE_SH7721 default "8" if CPU_SUBTYPE_SH7750R || CPU_SUBTYPE_SH7751R default "12" if CPU_SUBTYPE_SH7780 default "4" diff --git a/arch/sh/drivers/dma/dma-sh.c b/arch/sh/drivers/dma/dma-sh.c index 958bac1c585a..5c3359756a92 100644 --- a/arch/sh/drivers/dma/dma-sh.c +++ b/arch/sh/drivers/dma/dma-sh.c @@ -25,6 +25,7 @@ static int dmte_irq_map[] = { DMTE2_IRQ, DMTE3_IRQ, #if defined(CONFIG_CPU_SUBTYPE_SH7720) || \ + defined(CONFIG_CPU_SUBTYPE_SH7721) || \ defined(CONFIG_CPU_SUBTYPE_SH7751R) || \ defined(CONFIG_CPU_SUBTYPE_SH7760) || \ defined(CONFIG_CPU_SUBTYPE_SH7709) || \ @@ -203,6 +204,7 @@ static int sh_dmac_get_dma_residue(struct dma_channel *chan) } #if defined(CONFIG_CPU_SUBTYPE_SH7720) || \ + defined(CONFIG_CPU_SUBTYPE_SH7721) || \ defined(CONFIG_CPU_SUBTYPE_SH7780) #define dmaor_read_reg() ctrl_inw(DMAOR) #define dmaor_write_reg(data) ctrl_outw(data, DMAOR) diff --git a/arch/sh/drivers/pci/Makefile b/arch/sh/drivers/pci/Makefile index fba6b5ba0b3a..0718805774e8 100644 --- a/arch/sh/drivers/pci/Makefile +++ b/arch/sh/drivers/pci/Makefile @@ -7,16 +7,19 @@ obj-$(CONFIG_PCI_AUTO) += pci-auto.o obj-$(CONFIG_CPU_SUBTYPE_SH7751) += pci-sh7751.o ops-sh4.o obj-$(CONFIG_CPU_SUBTYPE_SH7751R) += pci-sh7751.o ops-sh4.o +obj-$(CONFIG_CPU_SUBTYPE_SH7763) += pci-sh7780.o ops-sh4.o obj-$(CONFIG_CPU_SUBTYPE_SH7780) += pci-sh7780.o ops-sh4.o obj-$(CONFIG_CPU_SUBTYPE_SH7785) += pci-sh7780.o ops-sh4.o +obj-$(CONFIG_CPU_SH5) += pci-sh5.o ops-sh5.o -obj-$(CONFIG_SH_DREAMCAST) += ops-dreamcast.o fixups-dreamcast.o \ - dma-dreamcast.o +obj-$(CONFIG_SH_DREAMCAST) += ops-dreamcast.o fixups-dreamcast.o obj-$(CONFIG_SH_SECUREEDGE5410) += ops-snapgear.o obj-$(CONFIG_SH_RTS7751R2D) += ops-rts7751r2d.o fixups-rts7751r2d.o obj-$(CONFIG_SH_SH03) += ops-sh03.o fixups-sh03.o obj-$(CONFIG_SH_HIGHLANDER) += ops-r7780rp.o fixups-r7780rp.o +obj-$(CONFIG_SH_SDK7780) += ops-sdk7780.o fixups-sdk7780.o obj-$(CONFIG_SH_TITAN) += ops-titan.o obj-$(CONFIG_SH_LANDISK) += ops-landisk.o obj-$(CONFIG_SH_LBOX_RE2) += ops-lboxre2.o fixups-lboxre2.o obj-$(CONFIG_SH_7780_SOLUTION_ENGINE) += ops-se7780.o fixups-se7780.o +obj-$(CONFIG_SH_CAYMAN) += ops-cayman.o diff --git a/arch/sh/drivers/pci/dma-dreamcast.c b/arch/sh/drivers/pci/dma-dreamcast.c deleted file mode 100644 index 888a34050599..000000000000 --- a/arch/sh/drivers/pci/dma-dreamcast.c +++ /dev/null @@ -1,70 +0,0 @@ -/* - * arch/sh/drivers/pci/dma-dreamcast.c - * - * PCI DMA support for the Sega Dreamcast - * - * Copyright (C) 2001, 2002 M. R. Brown - * Copyright (C) 2002, 2003 Paul Mundt - * - * This file originally bore the message (with enclosed-$): - * Id: pci.c,v 1.3 2003/05/04 19:29:46 lethal Exp - * Dreamcast PCI: Supports SEGA Broadband Adaptor only. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#include <linux/sched.h> -#include <linux/kernel.h> -#include <linux/param.h> -#include <linux/interrupt.h> -#include <linux/init.h> -#include <linux/irq.h> -#include <linux/pci.h> -#include <linux/dma-mapping.h> -#include <linux/device.h> - -#include <asm/io.h> -#include <asm/irq.h> -#include <asm/mach/pci.h> - -static int gapspci_dma_used = 0; - -void *dreamcast_consistent_alloc(struct device *dev, size_t size, - dma_addr_t *dma_handle, gfp_t flag) -{ - unsigned long buf; - - if (dev && dev->bus != &pci_bus_type) - return NULL; - - if (gapspci_dma_used + size > GAPSPCI_DMA_SIZE) - return ERR_PTR(-EINVAL); - - buf = GAPSPCI_DMA_BASE + gapspci_dma_used; - - gapspci_dma_used = PAGE_ALIGN(gapspci_dma_used+size); - - *dma_handle = (dma_addr_t)buf; - - buf = P2SEGADDR(buf); - - /* Flush the dcache before we hand off the buffer */ - __flush_purge_region((void *)buf, size); - - return (void *)buf; -} - -int dreamcast_consistent_free(struct device *dev, size_t size, - void *vaddr, dma_addr_t dma_handle) -{ - if (dev && dev->bus != &pci_bus_type) - return -EINVAL; - - /* XXX */ - gapspci_dma_used = 0; - - return 0; -} - diff --git a/arch/sh/drivers/pci/fixups-dreamcast.c b/arch/sh/drivers/pci/fixups-dreamcast.c index 6f53f8200dc3..c44699301eeb 100644 --- a/arch/sh/drivers/pci/fixups-dreamcast.c +++ b/arch/sh/drivers/pci/fixups-dreamcast.c @@ -22,6 +22,7 @@ #include <linux/init.h> #include <linux/irq.h> #include <linux/pci.h> +#include <linux/dma-mapping.h> #include <asm/io.h> #include <asm/irq.h> @@ -40,6 +41,15 @@ static void __init gapspci_fixup_resources(struct pci_dev *dev) */ dev->resource[1].start = p->io_resource->start + 0x100; dev->resource[1].end = dev->resource[1].start + 0x200 - 1; + /* + * Redirect dma memory allocations to special memory window. + */ + BUG_ON(!dma_declare_coherent_memory(&dev->dev, + GAPSPCI_DMA_BASE, + GAPSPCI_DMA_BASE, + GAPSPCI_DMA_SIZE, + DMA_MEMORY_MAP | + DMA_MEMORY_EXCLUSIVE)); break; default: printk("PCI: Failed resource fixup\n"); diff --git a/arch/sh/drivers/pci/fixups-sdk7780.c b/arch/sh/drivers/pci/fixups-sdk7780.c new file mode 100644 index 000000000000..2f8863099dd1 --- /dev/null +++ b/arch/sh/drivers/pci/fixups-sdk7780.c @@ -0,0 +1,59 @@ +/* + * arch/sh/drivers/pci/fixups-sdk7780.c + * + * PCI fixups for the SDK7780SE03 + * + * Copyright (C) 2003 Lineo uSolutions, Inc. + * Copyright (C) 2004 - 2006 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/pci.h> +#include "pci-sh4.h" +#include <asm/io.h> + +int pci_fixup_pcic(void) +{ + ctrl_outl(0x00000001, SH7780_PCI_VCR2); + + /* Enable all interrupts, so we know what to fix */ + pci_write_reg(0x0000C3FF, SH7780_PCIIMR); + pci_write_reg(0x0000380F, SH7780_PCIAINTM); + + /* Set up standard PCI config registers */ + pci_write_reg(0xFB00, SH7780_PCISTATUS); + pci_write_reg(0x0047, SH7780_PCICMD); + pci_write_reg(0x00, SH7780_PCIPIF); + pci_write_reg(0x00, SH7780_PCISUB); + pci_write_reg(0x06, SH7780_PCIBCC); + pci_write_reg(0x1912, SH7780_PCISVID); + pci_write_reg(0x0001, SH7780_PCISID); + + pci_write_reg(0x08000000, SH7780_PCIMBAR0); /* PCI */ + pci_write_reg(0x08000000, SH7780_PCILAR0); /* SHwy */ + pci_write_reg(0x07F00001, SH7780_PCILSR); /* size 128M w/ MBAR */ + + pci_write_reg(0x00000000, SH7780_PCIMBAR1); + pci_write_reg(0x00000000, SH7780_PCILAR1); + pci_write_reg(0x00000000, SH7780_PCILSR1); + + pci_write_reg(0xAB000801, SH7780_PCIIBAR); + + /* + * Set the MBR so PCI address is one-to-one with window, + * meaning all calls go straight through... use ifdef to + * catch erroneous assumption. + */ + pci_write_reg(0xFD000000 , SH7780_PCIMBR0); + pci_write_reg(0x00FC0000 , SH7780_PCIMBMR0); /* 16M */ + + /* Set IOBR for window containing area specified in pci.h */ + pci_write_reg(PCIBIOS_MIN_IO & ~(SH7780_PCI_IO_SIZE-1), SH7780_PCIIOBR); + pci_write_reg((SH7780_PCI_IO_SIZE-1) & (7 << 18), SH7780_PCIIOBMR); + + pci_write_reg(0xA5000C01, SH7780_PCICR); + + return 0; +} diff --git a/arch/sh/drivers/pci/ops-cayman.c b/arch/sh/drivers/pci/ops-cayman.c new file mode 100644 index 000000000000..980275ffa30b --- /dev/null +++ b/arch/sh/drivers/pci/ops-cayman.c @@ -0,0 +1,94 @@ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/pci.h> +#include <linux/types.h> +#include <asm/cpu/irq.h> +#include "pci-sh5.h" + +static inline u8 bridge_swizzle(u8 pin, u8 slot) +{ + return (((pin - 1) + slot) % 4) + 1; +} + +int __init pcibios_map_platform_irq(struct pci_dev *dev, u8 slot, u8 pin) +{ + int result = -1; + + /* The complication here is that the PCI IRQ lines from the Cayman's 2 + 5V slots get into the CPU via a different path from the IRQ lines + from the 3 3.3V slots. Thus, we have to detect whether the card's + interrupts go via the 5V or 3.3V path, i.e. the 'bridge swizzling' + at the point where we cross from 5V to 3.3V is not the normal case. + + The added complication is that we don't know that the 5V slots are + always bus 2, because a card containing a PCI-PCI bridge may be + plugged into a 3.3V slot, and this changes the bus numbering. + + Also, the Cayman has an intermediate PCI bus that goes a custom + expansion board header (and to the secondary bridge). This bus has + never been used in practice. + + The 1ary onboard PCI-PCI bridge is device 3 on bus 0 + The 2ary onboard PCI-PCI bridge is device 0 on the 2ary bus of + the 1ary bridge. + */ + + struct slot_pin { + int slot; + int pin; + } path[4]; + int i=0; + + while (dev->bus->number > 0) { + + slot = path[i].slot = PCI_SLOT(dev->devfn); + pin = path[i].pin = bridge_swizzle(pin, slot); + dev = dev->bus->self; + i++; + if (i > 3) panic("PCI path to root bus too long!\n"); + } + + slot = PCI_SLOT(dev->devfn); + /* This is the slot on bus 0 through which the device is eventually + reachable. */ + + /* Now work back up. */ + if ((slot < 3) || (i == 0)) { + /* Bus 0 (incl. PCI-PCI bridge itself) : perform the final + swizzle now. */ + result = IRQ_INTA + bridge_swizzle(pin, slot) - 1; + } else { + i--; + slot = path[i].slot; + pin = path[i].pin; + if (slot > 0) { + panic("PCI expansion bus device found - not handled!\n"); + } else { + if (i > 0) { + /* 5V slots */ + i--; + slot = path[i].slot; + pin = path[i].pin; + /* 'pin' was swizzled earlier wrt slot, don't do it again. */ + result = IRQ_P2INTA + (pin - 1); + } else { + /* IRQ for 2ary PCI-PCI bridge : unused */ + result = -1; + } + } + } + + return result; +} + +struct pci_channel board_pci_channels[] = { + { &sh5_pci_ops, NULL, NULL, 0, 0xff }, + { NULL, NULL, NULL, 0, 0 }, +}; +EXPORT_SYMBOL(board_pci_channels); + +int __init pcibios_init_platform(void) +{ + return sh5pci_init(__pa(memory_start), + __pa(memory_end) - __pa(memory_start)); +} diff --git a/arch/sh/drivers/pci/ops-r7780rp.c b/arch/sh/drivers/pci/ops-r7780rp.c index 48fe4032ebea..5fdadaeed6fc 100644 --- a/arch/sh/drivers/pci/ops-r7780rp.c +++ b/arch/sh/drivers/pci/ops-r7780rp.c @@ -17,25 +17,13 @@ #include <asm/io.h> #include "pci-sh4.h" -static char r7780rp_irq_tab[] __initdata = { - 0, 1, 2, 3, -}; - -static char r7780mp_irq_tab[] __initdata = { +static char irq_tab[] __initdata = { 65, 66, 67, 68, }; int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin) { - if (mach_is_r7780rp()) - return r7780rp_irq_tab[slot]; - if (mach_is_r7780mp() || mach_is_r7785rp()) - return r7780mp_irq_tab[slot]; - - printk(KERN_ERR "PCI: Bad IRQ mapping " - "request for slot %d, func %d\n", slot, pin-1); - - return -1; + return irq_tab[slot]; } static struct resource sh7780_io_resource = { diff --git a/arch/sh/drivers/pci/ops-sdk7780.c b/arch/sh/drivers/pci/ops-sdk7780.c new file mode 100644 index 000000000000..66a9b4047f26 --- /dev/null +++ b/arch/sh/drivers/pci/ops-sdk7780.c @@ -0,0 +1,73 @@ +/* + * linux/arch/sh/drivers/pci/ops-sdk7780.c + * + * Copyright (C) 2006 Nobuhiro Iwamatsu + * + * PCI initialization for the SDK7780SE03 + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + */ +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/pci.h> +#include <asm/sdk7780.h> +#include <asm/io.h> +#include "pci-sh4.h" + +/* IDSEL [16][17][18][19][20][21][22][23][24][25][26][27][28][29][30][31] */ +static char sdk7780_irq_tab[4][16] __initdata = { + /* INTA */ + { 65, 68, 67, 68, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 }, + /* INTB */ + { 66, 65, -1, 65, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 }, + /* INTC */ + { 67, 66, -1, 66, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 }, + /* INTD */ + { 68, 67, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 }, +}; + +int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin) +{ + return sdk7780_irq_tab[pin-1][slot]; +} + +static struct resource sdk7780_io_resource = { + .name = "SH7780_IO", + .start = SH7780_PCI_IO_BASE, + .end = SH7780_PCI_IO_BASE + SH7780_PCI_IO_SIZE - 1, + .flags = IORESOURCE_IO +}; + +static struct resource sdk7780_mem_resource = { + .name = "SH7780_mem", + .start = SH7780_PCI_MEMORY_BASE, + .end = SH7780_PCI_MEMORY_BASE + SH7780_PCI_MEM_SIZE - 1, + .flags = IORESOURCE_MEM +}; + +struct pci_channel board_pci_channels[] = { + { &sh4_pci_ops, &sdk7780_io_resource, &sdk7780_mem_resource, 0, 0xff }, + { NULL, NULL, NULL, 0, 0 }, +}; +EXPORT_SYMBOL(board_pci_channels); + +static struct sh4_pci_address_map sdk7780_pci_map = { + .window0 = { + .base = SH7780_CS2_BASE_ADDR, + .size = 0x04000000, + }, + .window1 = { + .base = SH7780_CS3_BASE_ADDR, + .size = 0x04000000, + }, + .flags = SH4_PCIC_NO_RESET, +}; + +int __init pcibios_init_platform(void) +{ + printk(KERN_INFO "SH7780 PCI: Finished initializing PCI controller\n"); + return sh7780_pcic_init(&sdk7780_pci_map); +} diff --git a/arch/sh/drivers/pci/ops-sh5.c b/arch/sh/drivers/pci/ops-sh5.c new file mode 100644 index 000000000000..729e38a6fe07 --- /dev/null +++ b/arch/sh/drivers/pci/ops-sh5.c @@ -0,0 +1,93 @@ +/* + * Support functions for the SH5 PCI hardware. + * + * Copyright (C) 2001 David J. Mckay (david.mckay@st.com) + * Copyright (C) 2003, 2004 Paul Mundt + * Copyright (C) 2004 Richard Curnow + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + */ +#include <linux/kernel.h> +#include <linux/rwsem.h> +#include <linux/smp.h> +#include <linux/interrupt.h> +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/pci.h> +#include <linux/delay.h> +#include <linux/types.h> +#include <linux/irq.h> +#include <asm/pci.h> +#include <asm/io.h> +#include "pci-sh5.h" + +static void __init pci_fixup_ide_bases(struct pci_dev *d) +{ + int i; + + /* + * PCI IDE controllers use non-standard I/O port decoding, respect it. + */ + if ((d->class >> 8) != PCI_CLASS_STORAGE_IDE) + return; + printk("PCI: IDE base address fixup for %s\n", pci_name(d)); + for(i=0; i<4; i++) { + struct resource *r = &d->resource[i]; + if ((r->start & ~0x80) == 0x374) { + r->start |= 2; + r->end = r->start; + } + } +} +DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_ide_bases); + +char * __devinit pcibios_setup(char *str) +{ + return str; +} + +static int sh5pci_read(struct pci_bus *bus, unsigned int devfn, int where, + int size, u32 *val) +{ + SH5PCI_WRITE(PAR, CONFIG_CMD(bus, devfn, where)); + + switch (size) { + case 1: + *val = (u8)SH5PCI_READ_BYTE(PDR + (where & 3)); + break; + case 2: + *val = (u16)SH5PCI_READ_SHORT(PDR + (where & 2)); + break; + case 4: + *val = SH5PCI_READ(PDR); + break; + } + + return PCIBIOS_SUCCESSFUL; +} + +static int sh5pci_write(struct pci_bus *bus, unsigned int devfn, int where, + int size, u32 val) +{ + SH5PCI_WRITE(PAR, CONFIG_CMD(bus, devfn, where)); + + switch (size) { + case 1: + SH5PCI_WRITE_BYTE(PDR + (where & 3), (u8)val); + break; + case 2: + SH5PCI_WRITE_SHORT(PDR + (where & 2), (u16)val); + break; + case 4: + SH5PCI_WRITE(PDR, val); + break; + } + + return PCIBIOS_SUCCESSFUL; +} + +struct pci_ops sh5_pci_ops = { + .read = sh5pci_read, + .write = sh5pci_write, +}; diff --git a/arch/sh/drivers/pci/pci-auto.c b/arch/sh/drivers/pci/pci-auto.c index 224e007736fb..ea404704ace8 100644 --- a/arch/sh/drivers/pci/pci-auto.c +++ b/arch/sh/drivers/pci/pci-auto.c @@ -516,10 +516,8 @@ pciauto_bus_scan(struct pci_channel *hose, int top_bus, int current_bus) PCI_COMMAND, cmdstat | PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER); -#if !defined(CONFIG_SH_HS7751RVOIP) && !defined(CONFIG_SH_RTS7751R2D) early_write_config_byte(hose, top_bus, current_bus, pci_devfn, PCI_LATENCY_TIMER, 0x80); -#endif /* Allocate PCI I/O and/or memory space */ pciauto_setup_bars(hose, top_bus, current_bus, pci_devfn, PCI_BASE_ADDRESS_5); diff --git a/arch/sh/drivers/pci/pci-sh4.h b/arch/sh/drivers/pci/pci-sh4.h index 1901c33cde6a..4925c79ea959 100644 --- a/arch/sh/drivers/pci/pci-sh4.h +++ b/arch/sh/drivers/pci/pci-sh4.h @@ -1,7 +1,9 @@ #ifndef __PCI_SH4_H #define __PCI_SH4_H -#if defined(CONFIG_CPU_SUBTYPE_SH7780) || defined(CONFIG_CPU_SUBTYPE_SH7785) +#if defined(CONFIG_CPU_SUBTYPE_SH7780) || \ + defined(CONFIG_CPU_SUBTYPE_SH7785) || \ + defined(CONFIG_CPU_SUBTYPE_SH7763) #include "pci-sh7780.h" #else #include "pci-sh7751.h" diff --git a/arch/sh/drivers/pci/pci-sh5.c b/arch/sh/drivers/pci/pci-sh5.c new file mode 100644 index 000000000000..a00a4df8c02d --- /dev/null +++ b/arch/sh/drivers/pci/pci-sh5.c @@ -0,0 +1,228 @@ +/* + * Copyright (C) 2001 David J. Mckay (david.mckay@st.com) + * Copyright (C) 2003, 2004 Paul Mundt + * Copyright (C) 2004 Richard Curnow + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + * + * Support functions for the SH5 PCI hardware. + */ + +#include <linux/kernel.h> +#include <linux/rwsem.h> +#include <linux/smp.h> +#include <linux/interrupt.h> +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/pci.h> +#include <linux/delay.h> +#include <linux/types.h> +#include <linux/irq.h> +#include <asm/cpu/irq.h> +#include <asm/pci.h> +#include <asm/io.h> +#include "pci-sh5.h" + +unsigned long pcicr_virt; +unsigned long PCI_IO_AREA; + +/* Rounds a number UP to the nearest power of two. Used for + * sizing the PCI window. + */ +static u32 __init r2p2(u32 num) +{ + int i = 31; + u32 tmp = num; + + if (num == 0) + return 0; + + do { + if (tmp & (1 << 31)) + break; + i--; + tmp <<= 1; + } while (i >= 0); + + tmp = 1 << i; + /* If the original number isn't a power of 2, round it up */ + if (tmp != num) + tmp <<= 1; + + return tmp; +} + +static irqreturn_t pcish5_err_irq(int irq, void *dev_id) +{ + struct pt_regs *regs = get_irq_regs(); + unsigned pci_int, pci_air, pci_cir, pci_aint; + + pci_int = SH5PCI_READ(INT); + pci_cir = SH5PCI_READ(CIR); + pci_air = SH5PCI_READ(AIR); + + if (pci_int) { + printk("PCI INTERRUPT (at %08llx)!\n", regs->pc); + printk("PCI INT -> 0x%x\n", pci_int & 0xffff); + printk("PCI AIR -> 0x%x\n", pci_air); + printk("PCI CIR -> 0x%x\n", pci_cir); + SH5PCI_WRITE(INT, ~0); + } + + pci_aint = SH5PCI_READ(AINT); + if (pci_aint) { + printk("PCI ARB INTERRUPT!\n"); + printk("PCI AINT -> 0x%x\n", pci_aint); + printk("PCI AIR -> 0x%x\n", pci_air); + printk("PCI CIR -> 0x%x\n", pci_cir); + SH5PCI_WRITE(AINT, ~0); + } + + return IRQ_HANDLED; +} + +static irqreturn_t pcish5_serr_irq(int irq, void *dev_id) +{ + printk("SERR IRQ\n"); + + return IRQ_NONE; +} + +int __init sh5pci_init(unsigned long memStart, unsigned long memSize) +{ + u32 lsr0; + u32 uval; + + if (request_irq(IRQ_ERR, pcish5_err_irq, + IRQF_DISABLED, "PCI Error",NULL) < 0) { + printk(KERN_ERR "PCISH5: Cannot hook PCI_PERR interrupt\n"); + return -EINVAL; + } + + if (request_irq(IRQ_SERR, pcish5_serr_irq, + IRQF_DISABLED, "PCI SERR interrupt", NULL) < 0) { + printk(KERN_ERR "PCISH5: Cannot hook PCI_SERR interrupt\n"); + return -EINVAL; + } + + pcicr_virt = onchip_remap(SH5PCI_ICR_BASE, 1024, "PCICR"); + if (!pcicr_virt) { + panic("Unable to remap PCICR\n"); + } + + PCI_IO_AREA = onchip_remap(SH5PCI_IO_BASE, 0x10000, "PCIIO"); + if (!PCI_IO_AREA) { + panic("Unable to remap PCIIO\n"); + } + + /* Clear snoop registers */ + SH5PCI_WRITE(CSCR0, 0); + SH5PCI_WRITE(CSCR1, 0); + + /* Switch off interrupts */ + SH5PCI_WRITE(INTM, 0); + SH5PCI_WRITE(AINTM, 0); + SH5PCI_WRITE(PINTM, 0); + + /* Set bus active, take it out of reset */ + uval = SH5PCI_READ(CR); + + /* Set command Register */ + SH5PCI_WRITE(CR, uval | CR_LOCK_MASK | CR_CFINT| CR_FTO | CR_PFE | + CR_PFCS | CR_BMAM); + + uval=SH5PCI_READ(CR); + + /* Allow it to be a master */ + /* NB - WE DISABLE I/O ACCESS to stop overlap */ + /* set WAIT bit to enable stepping, an attempt to improve stability */ + SH5PCI_WRITE_SHORT(CSR_CMD, + PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | + PCI_COMMAND_WAIT); + + /* + ** Set translation mapping memory in order to convert the address + ** used for the main bus, to the PCI internal address. + */ + SH5PCI_WRITE(MBR,0x40000000); + + /* Always set the max size 512M */ + SH5PCI_WRITE(MBMR, PCISH5_MEM_SIZCONV(512*1024*1024)); + + /* + ** I/O addresses are mapped at internal PCI specific address + ** as is described into the configuration bridge table. + ** These are changed to 0, to allow cards that have legacy + ** io such as vga to function correctly. We set the SH5 IOBAR to + ** 256K, which is a bit big as we can only have 64K of address space + */ + + SH5PCI_WRITE(IOBR,0x0); + + /* Set up a 256K window. Totally pointless waste of address space */ + SH5PCI_WRITE(IOBMR,0); + + /* The SH5 has a HUGE 256K I/O region, which breaks the PCI spec. + * Ideally, we would want to map the I/O region somewhere, but it + * is so big this is not that easy! + */ + SH5PCI_WRITE(CSR_IBAR0,~0); + /* Set memory size value */ + memSize = memory_end - memory_start; + + /* Now we set up the mbars so the PCI bus can see the memory of + * the machine */ + if (memSize < (1024 * 1024)) { + printk(KERN_ERR "PCISH5: Ridiculous memory size of 0x%lx?\n", + memSize); + return -EINVAL; + } + + /* Set LSR 0 */ + lsr0 = (memSize > (512 * 1024 * 1024)) ? 0x1ff00001 : + ((r2p2(memSize) - 0x100000) | 0x1); + SH5PCI_WRITE(LSR0, lsr0); + + /* Set MBAR 0 */ + SH5PCI_WRITE(CSR_MBAR0, memory_start); + SH5PCI_WRITE(LAR0, memory_start); + + SH5PCI_WRITE(CSR_MBAR1,0); + SH5PCI_WRITE(LAR1,0); + SH5PCI_WRITE(LSR1,0); + + /* Enable the PCI interrupts on the device */ + SH5PCI_WRITE(INTM, ~0); + SH5PCI_WRITE(AINTM, ~0); + SH5PCI_WRITE(PINTM, ~0); + + return 0; +} + +void __devinit pcibios_fixup_bus(struct pci_bus *bus) +{ + struct pci_dev *dev = bus->self; + int i; + + if (dev) { + for (i= 0; i < 3; i++) { + bus->resource[i] = + &dev->resource[PCI_BRIDGE_RESOURCES+i]; + bus->resource[i]->name = bus->name; + } + bus->resource[0]->flags |= IORESOURCE_IO; + bus->resource[1]->flags |= IORESOURCE_MEM; + + /* For now, propagate host limits to the bus; + * we'll adjust them later. */ + bus->resource[0]->end = 64*1024 - 1 ; + bus->resource[1]->end = PCIBIOS_MIN_MEM+(256*1024*1024)-1; + bus->resource[0]->start = PCIBIOS_MIN_IO; + bus->resource[1]->start = PCIBIOS_MIN_MEM; + + /* Turn off downstream PF memory address range by default */ + bus->resource[2]->start = 1024*1024; + bus->resource[2]->end = bus->resource[2]->start - 1; + } +} diff --git a/arch/sh/drivers/pci/pci-sh5.h b/arch/sh/drivers/pci/pci-sh5.h new file mode 100644 index 000000000000..7cff3fc04d30 --- /dev/null +++ b/arch/sh/drivers/pci/pci-sh5.h @@ -0,0 +1,113 @@ +/* + * Copyright (C) 2001 David J. Mckay (david.mckay@st.com) + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + * + * Definitions for the SH5 PCI hardware. + */ +#ifndef __PCI_SH5_H +#define __PCI_SH5_H + +/* Product ID */ +#define PCISH5_PID 0x350d + +/* vendor ID */ +#define PCISH5_VID 0x1054 + +/* Configuration types */ +#define ST_TYPE0 0x00 /* Configuration cycle type 0 */ +#define ST_TYPE1 0x01 /* Configuration cycle type 1 */ + +/* VCR data */ +#define PCISH5_VCR_STATUS 0x00 +#define PCISH5_VCR_VERSION 0x08 + +/* +** ICR register offsets and bits +*/ +#define PCISH5_ICR_CR 0x100 /* PCI control register values */ +#define CR_PBAM (1<<12) +#define CR_PFCS (1<<11) +#define CR_FTO (1<<10) +#define CR_PFE (1<<9) +#define CR_TBS (1<<8) +#define CR_SPUE (1<<7) +#define CR_BMAM (1<<6) +#define CR_HOST (1<<5) +#define CR_CLKEN (1<<4) +#define CR_SOCS (1<<3) +#define CR_IOCS (1<<2) +#define CR_RSTCTL (1<<1) +#define CR_CFINT (1<<0) +#define CR_LOCK_MASK 0xa5000000 + +#define PCISH5_ICR_INT 0x114 /* Interrupt registert values */ +#define INT_MADIM (1<<2) + +#define PCISH5_ICR_LSR0 0X104 /* Local space register values */ +#define PCISH5_ICR_LSR1 0X108 /* Local space register values */ +#define PCISH5_ICR_LAR0 0x10c /* Local address register values */ +#define PCISH5_ICR_LAR1 0x110 /* Local address register values */ +#define PCISH5_ICR_INTM 0x118 /* Interrupt mask register values */ +#define PCISH5_ICR_AIR 0x11c /* Interrupt error address information register values */ +#define PCISH5_ICR_CIR 0x120 /* Interrupt error command information register values */ +#define PCISH5_ICR_AINT 0x130 /* Interrupt error arbiter interrupt register values */ +#define PCISH5_ICR_AINTM 0x134 /* Interrupt error arbiter interrupt mask register values */ +#define PCISH5_ICR_BMIR 0x138 /* Interrupt error info register of bus master values */ +#define PCISH5_ICR_PAR 0x1c0 /* Pio address register values */ +#define PCISH5_ICR_MBR 0x1c4 /* Memory space bank register values */ +#define PCISH5_ICR_IOBR 0x1c8 /* I/O space bank register values */ +#define PCISH5_ICR_PINT 0x1cc /* power management interrupt register values */ +#define PCISH5_ICR_PINTM 0x1d0 /* power management interrupt mask register values */ +#define PCISH5_ICR_MBMR 0x1d8 /* memory space bank mask register values */ +#define PCISH5_ICR_IOBMR 0x1dc /* I/O space bank mask register values */ +#define PCISH5_ICR_CSCR0 0x210 /* PCI cache snoop control register 0 */ +#define PCISH5_ICR_CSCR1 0x214 /* PCI cache snoop control register 1 */ +#define PCISH5_ICR_PDR 0x220 /* Pio data register values */ + +/* These are configs space registers */ +#define PCISH5_ICR_CSR_VID 0x000 /* Vendor id */ +#define PCISH5_ICR_CSR_DID 0x002 /* Device id */ +#define PCISH5_ICR_CSR_CMD 0x004 /* Command register */ +#define PCISH5_ICR_CSR_STATUS 0x006 /* Stautus */ +#define PCISH5_ICR_CSR_IBAR0 0x010 /* I/O base address register */ +#define PCISH5_ICR_CSR_MBAR0 0x014 /* First Memory base address register */ +#define PCISH5_ICR_CSR_MBAR1 0x018 /* Second Memory base address register */ + +/* Base address of registers */ +#define SH5PCI_ICR_BASE (PHYS_PCI_BLOCK + 0x00040000) +#define SH5PCI_IO_BASE (PHYS_PCI_BLOCK + 0x00800000) +/* #define SH5PCI_VCR_BASE (P2SEG_PCICB_BLOCK + P2SEG) */ + +extern unsigned long pcicr_virt; +/* Register selection macro */ +#define PCISH5_ICR_REG(x) ( pcicr_virt + (PCISH5_ICR_##x)) +/* #define PCISH5_VCR_REG(x) ( SH5PCI_VCR_BASE (PCISH5_VCR_##x)) */ + +/* Write I/O functions */ +#define SH5PCI_WRITE(reg,val) ctrl_outl((u32)(val),PCISH5_ICR_REG(reg)) +#define SH5PCI_WRITE_SHORT(reg,val) ctrl_outw((u16)(val),PCISH5_ICR_REG(reg)) +#define SH5PCI_WRITE_BYTE(reg,val) ctrl_outb((u8)(val),PCISH5_ICR_REG(reg)) + +/* Read I/O functions */ +#define SH5PCI_READ(reg) ctrl_inl(PCISH5_ICR_REG(reg)) +#define SH5PCI_READ_SHORT(reg) ctrl_inw(PCISH5_ICR_REG(reg)) +#define SH5PCI_READ_BYTE(reg) ctrl_inb(PCISH5_ICR_REG(reg)) + +/* Set PCI config bits */ +#define SET_CONFIG_BITS(bus,devfn,where) ((((bus) << 16) | ((devfn) << 8) | ((where) & ~3)) | 0x80000000) + +/* Set PCI command register */ +#define CONFIG_CMD(bus, devfn, where) SET_CONFIG_BITS(bus->number,devfn,where) + +/* Size converters */ +#define PCISH5_MEM_SIZCONV(x) (((x / 0x40000) - 1) << 18) +#define PCISH5_IO_SIZCONV(x) (((x / 0x40000) - 1) << 18) + +extern struct pci_ops sh5_pci_ops; + +/* arch/sh/drivers/pci/pci-sh5.c */ +int sh5pci_init(unsigned long memStart, unsigned long memSize); + +#endif /* __PCI_SH5_H */ diff --git a/arch/sh/drivers/pci/pci-sh7780.c b/arch/sh/drivers/pci/pci-sh7780.c index e516087fb435..7d797f4de5e7 100644 --- a/arch/sh/drivers/pci/pci-sh7780.c +++ b/arch/sh/drivers/pci/pci-sh7780.c @@ -58,6 +58,7 @@ static int __init sh7780_pci_init(void) id = pci_read_reg(SH7780_PCIVID); if ((id & 0xffff) == SH7780_VENDOR_ID) { switch ((id >> 16) & 0xffff) { + case SH7763_DEVICE_ID: case SH7780_DEVICE_ID: case SH7781_DEVICE_ID: case SH7785_DEVICE_ID: diff --git a/arch/sh/drivers/pci/pci-sh7780.h b/arch/sh/drivers/pci/pci-sh7780.h index 1d069a859de2..97b2c98f05c4 100644 --- a/arch/sh/drivers/pci/pci-sh7780.h +++ b/arch/sh/drivers/pci/pci-sh7780.h @@ -16,6 +16,7 @@ #define SH7780_VENDOR_ID 0x1912 #define SH7781_DEVICE_ID 0x0001 #define SH7780_DEVICE_ID 0x0002 +#define SH7763_DEVICE_ID 0x0004 #define SH7785_DEVICE_ID 0x0007 /* SH7780 Control Registers */ diff --git a/arch/sh/drivers/pci/pci.c b/arch/sh/drivers/pci/pci.c index ccaba368ac9b..49b435c3a57a 100644 --- a/arch/sh/drivers/pci/pci.c +++ b/arch/sh/drivers/pci/pci.c @@ -71,7 +71,7 @@ subsys_initcall(pcibios_init); * Called after each bus is probed, but before its children * are examined. */ -void __devinit pcibios_fixup_bus(struct pci_bus *bus) +void __devinit __weak pcibios_fixup_bus(struct pci_bus *bus) { pci_read_bridge_bases(bus); } diff --git a/arch/sh/kernel/Makefile b/arch/sh/kernel/Makefile index 4b81d9c47b00..349d833deab5 100644 --- a/arch/sh/kernel/Makefile +++ b/arch/sh/kernel/Makefile @@ -1,25 +1,5 @@ -# -# Makefile for the Linux/SuperH kernel. -# - -extra-y := head.o init_task.o vmlinux.lds - -obj-y := debugtraps.o io.o io_generic.o irq.o machvec.o process.o ptrace.o \ - semaphore.o setup.o signal.o sys_sh.o syscalls.o \ - time.o topology.o traps.o - -obj-y += cpu/ timers/ -obj-$(CONFIG_VSYSCALL) += vsyscall/ -obj-$(CONFIG_SMP) += smp.o -obj-$(CONFIG_CF_ENABLER) += cf-enabler.o -obj-$(CONFIG_SH_STANDARD_BIOS) += sh_bios.o -obj-$(CONFIG_SH_KGDB) += kgdb_stub.o kgdb_jmp.o -obj-$(CONFIG_SH_CPU_FREQ) += cpufreq.o -obj-$(CONFIG_MODULES) += sh_ksyms.o module.o -obj-$(CONFIG_EARLY_PRINTK) += early_printk.o -obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o -obj-$(CONFIG_CRASH_DUMP) += crash_dump.o -obj-$(CONFIG_PM) += pm.o -obj-$(CONFIG_STACKTRACE) += stacktrace.o - -EXTRA_CFLAGS += -Werror +ifeq ($(CONFIG_SUPERH32),y) +include ${srctree}/arch/sh/kernel/Makefile_32 +else +include ${srctree}/arch/sh/kernel/Makefile_64 +endif diff --git a/arch/sh/kernel/Makefile_32 b/arch/sh/kernel/Makefile_32 new file mode 100644 index 000000000000..c89289831053 --- /dev/null +++ b/arch/sh/kernel/Makefile_32 @@ -0,0 +1,26 @@ +# +# Makefile for the Linux/SuperH kernel. +# + +extra-y := head_32.o init_task.o vmlinux.lds + +obj-y := debugtraps.o io.o io_generic.o irq.o machvec.o process_32.o \ + ptrace_32.o semaphore.o setup.o signal_32.o sys_sh.o sys_sh32.o \ + syscalls_32.o time_32.o topology.o traps.o traps_32.o + +obj-y += cpu/ timers/ +obj-$(CONFIG_VSYSCALL) += vsyscall/ +obj-$(CONFIG_SMP) += smp.o +obj-$(CONFIG_CF_ENABLER) += cf-enabler.o +obj-$(CONFIG_SH_STANDARD_BIOS) += sh_bios.o +obj-$(CONFIG_SH_KGDB) += kgdb_stub.o kgdb_jmp.o +obj-$(CONFIG_SH_CPU_FREQ) += cpufreq.o +obj-$(CONFIG_MODULES) += sh_ksyms_32.o module.o +obj-$(CONFIG_EARLY_PRINTK) += early_printk.o +obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o +obj-$(CONFIG_CRASH_DUMP) += crash_dump.o +obj-$(CONFIG_PM) += pm.o +obj-$(CONFIG_STACKTRACE) += stacktrace.o +obj-$(CONFIG_BINFMT_ELF) += dump_task.o + +EXTRA_CFLAGS += -Werror diff --git a/arch/sh/kernel/Makefile_64 b/arch/sh/kernel/Makefile_64 new file mode 100644 index 000000000000..1ef21cc087f3 --- /dev/null +++ b/arch/sh/kernel/Makefile_64 @@ -0,0 +1,22 @@ +extra-y := head_64.o init_task.o vmlinux.lds + +obj-y := debugtraps.o io.o io_generic.o irq.o machvec.o process_64.o \ + ptrace_64.o semaphore.o setup.o signal_64.o sys_sh.o sys_sh64.o \ + syscalls_64.o time_64.o topology.o traps.o traps_64.o + +obj-y += cpu/ timers/ +obj-$(CONFIG_VSYSCALL) += vsyscall/ +obj-$(CONFIG_SMP) += smp.o +obj-$(CONFIG_CF_ENABLER) += cf-enabler.o +obj-$(CONFIG_SH_STANDARD_BIOS) += sh_bios.o +obj-$(CONFIG_SH_KGDB) += kgdb_stub.o kgdb_jmp.o +obj-$(CONFIG_SH_CPU_FREQ) += cpufreq.o +obj-$(CONFIG_MODULES) += sh_ksyms_64.o module.o +obj-$(CONFIG_EARLY_PRINTK) += early_printk.o +obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o +obj-$(CONFIG_CRASH_DUMP) += crash_dump.o +obj-$(CONFIG_PM) += pm.o +obj-$(CONFIG_STACKTRACE) += stacktrace.o +obj-$(CONFIG_BINFMT_ELF) += dump_task.o + +EXTRA_CFLAGS += -Werror diff --git a/arch/sh/kernel/cpu/Makefile b/arch/sh/kernel/cpu/Makefile index d055a3ea6b4b..f471d242774e 100644 --- a/arch/sh/kernel/cpu/Makefile +++ b/arch/sh/kernel/cpu/Makefile @@ -6,8 +6,14 @@ obj-$(CONFIG_CPU_SH2) = sh2/ obj-$(CONFIG_CPU_SH2A) = sh2a/ obj-$(CONFIG_CPU_SH3) = sh3/ obj-$(CONFIG_CPU_SH4) = sh4/ +obj-$(CONFIG_CPU_SH5) = sh5/ + +# Special cases for family ancestry. + obj-$(CONFIG_CPU_SH4A) += sh4a/ +# Common interfaces. + obj-$(CONFIG_UBC_WAKEUP) += ubc.o obj-$(CONFIG_SH_ADC) += adc.o diff --git a/arch/sh/kernel/cpu/init.c b/arch/sh/kernel/cpu/init.c index c217c4bf0085..80a31329ead9 100644 --- a/arch/sh/kernel/cpu/init.c +++ b/arch/sh/kernel/cpu/init.c @@ -13,6 +13,7 @@ #include <linux/init.h> #include <linux/kernel.h> #include <linux/mm.h> +#include <linux/log2.h> #include <asm/mmu_context.h> #include <asm/processor.h> #include <asm/uaccess.h> @@ -20,9 +21,12 @@ #include <asm/system.h> #include <asm/cacheflush.h> #include <asm/cache.h> +#include <asm/elf.h> #include <asm/io.h> -#include <asm/ubc.h> #include <asm/smp.h> +#ifdef CONFIG_SUPERH32 +#include <asm/ubc.h> +#endif /* * Generic wrapper for command line arguments to disable on-chip @@ -61,25 +65,12 @@ static void __init speculative_execution_init(void) /* * Generic first-level cache init */ -static void __init cache_init(void) +#ifdef CONFIG_SUPERH32 +static void __uses_jump_to_uncached cache_init(void) { unsigned long ccr, flags; - /* First setup the rest of the I-cache info */ - current_cpu_data.icache.entry_mask = current_cpu_data.icache.way_incr - - current_cpu_data.icache.linesz; - - current_cpu_data.icache.way_size = current_cpu_data.icache.sets * - current_cpu_data.icache.linesz; - - /* And the D-cache too */ - current_cpu_data.dcache.entry_mask = current_cpu_data.dcache.way_incr - - current_cpu_data.dcache.linesz; - - current_cpu_data.dcache.way_size = current_cpu_data.dcache.sets * - current_cpu_data.dcache.linesz; - - jump_to_P2(); + jump_to_uncached(); ccr = ctrl_inl(CCR); /* @@ -156,7 +147,31 @@ static void __init cache_init(void) #endif ctrl_outl(flags, CCR); - back_to_P1(); + back_to_cached(); +} +#else +#define cache_init() do { } while (0) +#endif + +#define CSHAPE(totalsize, linesize, assoc) \ + ((totalsize & ~0xff) | (linesize << 4) | assoc) + +#define CACHE_DESC_SHAPE(desc) \ + CSHAPE((desc).way_size * (desc).ways, ilog2((desc).linesz), (desc).ways) + +static void detect_cache_shape(void) +{ + l1d_cache_shape = CACHE_DESC_SHAPE(current_cpu_data.dcache); + + if (current_cpu_data.dcache.flags & SH_CACHE_COMBINED) + l1i_cache_shape = l1d_cache_shape; + else + l1i_cache_shape = CACHE_DESC_SHAPE(current_cpu_data.icache); + + if (current_cpu_data.flags & CPU_HAS_L2_CACHE) + l2_cache_shape = CACHE_DESC_SHAPE(current_cpu_data.scache); + else + l2_cache_shape = -1; /* No S-cache */ } #ifdef CONFIG_SH_DSP @@ -228,14 +243,32 @@ asmlinkage void __cpuinit sh_cpu_init(void) if (current_cpu_data.type == CPU_SH_NONE) panic("Unknown CPU"); + /* First setup the rest of the I-cache info */ + current_cpu_data.icache.entry_mask = current_cpu_data.icache.way_incr - + current_cpu_data.icache.linesz; + + current_cpu_data.icache.way_size = current_cpu_data.icache.sets * + current_cpu_data.icache.linesz; + + /* And the D-cache too */ + current_cpu_data.dcache.entry_mask = current_cpu_data.dcache.way_incr - + current_cpu_data.dcache.linesz; + + current_cpu_data.dcache.way_size = current_cpu_data.dcache.sets * + current_cpu_data.dcache.linesz; + /* Init the cache */ cache_init(); - if (raw_smp_processor_id() == 0) + if (raw_smp_processor_id() == 0) { shm_align_mask = max_t(unsigned long, current_cpu_data.dcache.way_size - 1, PAGE_SIZE - 1); + /* Boot CPU sets the cache shape */ + detect_cache_shape(); + } + /* Disable the FPU */ if (fpu_disabled) { printk("FPU Disabled\n"); @@ -273,7 +306,10 @@ asmlinkage void __cpuinit sh_cpu_init(void) * like PTRACE_SINGLESTEP or doing hardware watchpoints in GDB. So .. * we wake it up and hope that all is well. */ +#ifdef CONFIG_SUPERH32 if (raw_smp_processor_id() == 0) ubc_wakeup(); +#endif + speculative_execution_init(); } diff --git a/arch/sh/kernel/cpu/irq/Makefile b/arch/sh/kernel/cpu/irq/Makefile index 8da8e178f09c..cc1836e47a5d 100644 --- a/arch/sh/kernel/cpu/irq/Makefile +++ b/arch/sh/kernel/cpu/irq/Makefile @@ -1,7 +1,9 @@ # # Makefile for the Linux/SuperH CPU-specifc IRQ handlers. # -obj-y += imask.o intc.o +obj-y += intc.o +obj-$(CONFIG_SUPERH32) += imask.o +obj-$(CONFIG_CPU_SH5) += intc-sh5.o obj-$(CONFIG_CPU_HAS_IPR_IRQ) += ipr.o obj-$(CONFIG_CPU_HAS_MASKREG_IRQ) += maskreg.o diff --git a/arch/sh/kernel/cpu/irq/intc-sh5.c b/arch/sh/kernel/cpu/irq/intc-sh5.c new file mode 100644 index 000000000000..43ee7a9a4f0b --- /dev/null +++ b/arch/sh/kernel/cpu/irq/intc-sh5.c @@ -0,0 +1,257 @@ +/* + * arch/sh/kernel/cpu/irq/intc-sh5.c + * + * Interrupt Controller support for SH5 INTC. + * + * Copyright (C) 2000, 2001 Paolo Alberelli + * Copyright (C) 2003 Paul Mundt + * + * Per-interrupt selective. IRLM=0 (Fixed priority) is not + * supported being useless without a cascaded interrupt + * controller. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/bitops.h> +#include <asm/cpu/irq.h> +#include <asm/page.h> + +/* + * Maybe the generic Peripheral block could move to a more + * generic include file. INTC Block will be defined here + * and only here to make INTC self-contained in a single + * file. + */ +#define INTC_BLOCK_OFFSET 0x01000000 + +/* Base */ +#define INTC_BASE PHYS_PERIPHERAL_BLOCK + \ + INTC_BLOCK_OFFSET + +/* Address */ +#define INTC_ICR_SET (intc_virt + 0x0) +#define INTC_ICR_CLEAR (intc_virt + 0x8) +#define INTC_INTPRI_0 (intc_virt + 0x10) +#define INTC_INTSRC_0 (intc_virt + 0x50) +#define INTC_INTSRC_1 (intc_virt + 0x58) +#define INTC_INTREQ_0 (intc_virt + 0x60) +#define INTC_INTREQ_1 (intc_virt + 0x68) +#define INTC_INTENB_0 (intc_virt + 0x70) +#define INTC_INTENB_1 (intc_virt + 0x78) +#define INTC_INTDSB_0 (intc_virt + 0x80) +#define INTC_INTDSB_1 (intc_virt + 0x88) + +#define INTC_ICR_IRLM 0x1 +#define INTC_INTPRI_PREGS 8 /* 8 Priority Registers */ +#define INTC_INTPRI_PPREG 8 /* 8 Priorities per Register */ + + +/* + * Mapper between the vector ordinal and the IRQ number + * passed to kernel/device drivers. + */ +int intc_evt_to_irq[(0xE20/0x20)+1] = { + -1, -1, -1, -1, -1, -1, -1, -1, /* 0x000 - 0x0E0 */ + -1, -1, -1, -1, -1, -1, -1, -1, /* 0x100 - 0x1E0 */ + 0, 0, 0, 0, 0, 1, 0, 0, /* 0x200 - 0x2E0 */ + 2, 0, 0, 3, 0, 0, 0, -1, /* 0x300 - 0x3E0 */ + 32, 33, 34, 35, 36, 37, 38, -1, /* 0x400 - 0x4E0 */ + -1, -1, -1, 63, -1, -1, -1, -1, /* 0x500 - 0x5E0 */ + -1, -1, 18, 19, 20, 21, 22, -1, /* 0x600 - 0x6E0 */ + 39, 40, 41, 42, -1, -1, -1, -1, /* 0x700 - 0x7E0 */ + 4, 5, 6, 7, -1, -1, -1, -1, /* 0x800 - 0x8E0 */ + -1, -1, -1, -1, -1, -1, -1, -1, /* 0x900 - 0x9E0 */ + 12, 13, 14, 15, 16, 17, -1, -1, /* 0xA00 - 0xAE0 */ + -1, -1, -1, -1, -1, -1, -1, -1, /* 0xB00 - 0xBE0 */ + -1, -1, -1, -1, -1, -1, -1, -1, /* 0xC00 - 0xCE0 */ + -1, -1, -1, -1, -1, -1, -1, -1, /* 0xD00 - 0xDE0 */ + -1, -1 /* 0xE00 - 0xE20 */ +}; + +/* + * Opposite mapper. + */ +static int IRQ_to_vectorN[NR_INTC_IRQS] = { + 0x12, 0x15, 0x18, 0x1B, 0x40, 0x41, 0x42, 0x43, /* 0- 7 */ + -1, -1, -1, -1, 0x50, 0x51, 0x52, 0x53, /* 8-15 */ + 0x54, 0x55, 0x32, 0x33, 0x34, 0x35, 0x36, -1, /* 16-23 */ + -1, -1, -1, -1, -1, -1, -1, -1, /* 24-31 */ + 0x20, 0x21, 0x22, 0x23, 0x24, 0x25, 0x26, 0x38, /* 32-39 */ + 0x39, 0x3A, 0x3B, -1, -1, -1, -1, -1, /* 40-47 */ + -1, -1, -1, -1, -1, -1, -1, -1, /* 48-55 */ + -1, -1, -1, -1, -1, -1, -1, 0x2B, /* 56-63 */ + +}; + +static unsigned long intc_virt; + +static unsigned int startup_intc_irq(unsigned int irq); +static void shutdown_intc_irq(unsigned int irq); +static void enable_intc_irq(unsigned int irq); +static void disable_intc_irq(unsigned int irq); +static void mask_and_ack_intc(unsigned int); +static void end_intc_irq(unsigned int irq); + +static struct hw_interrupt_type intc_irq_type = { + .typename = "INTC", + .startup = startup_intc_irq, + .shutdown = shutdown_intc_irq, + .enable = enable_intc_irq, + .disable = disable_intc_irq, + .ack = mask_and_ack_intc, + .end = end_intc_irq +}; + +static int irlm; /* IRL mode */ + +static unsigned int startup_intc_irq(unsigned int irq) +{ + enable_intc_irq(irq); + return 0; /* never anything pending */ +} + +static void shutdown_intc_irq(unsigned int irq) +{ + disable_intc_irq(irq); +} + +static void enable_intc_irq(unsigned int irq) +{ + unsigned long reg; + unsigned long bitmask; + + if ((irq <= IRQ_IRL3) && (irlm == NO_PRIORITY)) + printk("Trying to use straight IRL0-3 with an encoding platform.\n"); + + if (irq < 32) { + reg = INTC_INTENB_0; + bitmask = 1 << irq; + } else { + reg = INTC_INTENB_1; + bitmask = 1 << (irq - 32); + } + + ctrl_outl(bitmask, reg); +} + +static void disable_intc_irq(unsigned int irq) +{ + unsigned long reg; + unsigned long bitmask; + + if (irq < 32) { + reg = INTC_INTDSB_0; + bitmask = 1 << irq; + } else { + reg = INTC_INTDSB_1; + bitmask = 1 << (irq - 32); + } + + ctrl_outl(bitmask, reg); +} + +static void mask_and_ack_intc(unsigned int irq) +{ + disable_intc_irq(irq); +} + +static void end_intc_irq(unsigned int irq) +{ + enable_intc_irq(irq); +} + +/* For future use, if we ever support IRLM=0) */ +void make_intc_irq(unsigned int irq) +{ + disable_irq_nosync(irq); + irq_desc[irq].chip = &intc_irq_type; + disable_intc_irq(irq); +} + +#if defined(CONFIG_PROC_FS) && defined(CONFIG_SYSCTL) +int intc_irq_describe(char* p, int irq) +{ + if (irq < NR_INTC_IRQS) + return sprintf(p, "(0x%3x)", IRQ_to_vectorN[irq]*0x20); + else + return 0; +} +#endif + +void __init plat_irq_setup(void) +{ + unsigned long long __dummy0, __dummy1=~0x00000000100000f0; + unsigned long reg; + unsigned long data; + int i; + + intc_virt = onchip_remap(INTC_BASE, 1024, "INTC"); + if (!intc_virt) { + panic("Unable to remap INTC\n"); + } + + + /* Set default: per-line enable/disable, priority driven ack/eoi */ + for (i = 0; i < NR_INTC_IRQS; i++) { + if (platform_int_priority[i] != NO_PRIORITY) { + irq_desc[i].chip = &intc_irq_type; + } + } + + + /* Disable all interrupts and set all priorities to 0 to avoid trouble */ + ctrl_outl(-1, INTC_INTDSB_0); + ctrl_outl(-1, INTC_INTDSB_1); + + for (reg = INTC_INTPRI_0, i = 0; i < INTC_INTPRI_PREGS; i++, reg += 8) + ctrl_outl( NO_PRIORITY, reg); + + + /* Set IRLM */ + /* If all the priorities are set to 'no priority', then + * assume we are using encoded mode. + */ + irlm = platform_int_priority[IRQ_IRL0] + platform_int_priority[IRQ_IRL1] + \ + platform_int_priority[IRQ_IRL2] + platform_int_priority[IRQ_IRL3]; + + if (irlm == NO_PRIORITY) { + /* IRLM = 0 */ + reg = INTC_ICR_CLEAR; + i = IRQ_INTA; + printk("Trying to use encoded IRL0-3. IRLs unsupported.\n"); + } else { + /* IRLM = 1 */ + reg = INTC_ICR_SET; + i = IRQ_IRL0; + } + ctrl_outl(INTC_ICR_IRLM, reg); + + /* Set interrupt priorities according to platform description */ + for (data = 0, reg = INTC_INTPRI_0; i < NR_INTC_IRQS; i++) { + data |= platform_int_priority[i] << ((i % INTC_INTPRI_PPREG) * 4); + if ((i % INTC_INTPRI_PPREG) == (INTC_INTPRI_PPREG - 1)) { + /* Upon the 7th, set Priority Register */ + ctrl_outl(data, reg); + data = 0; + reg += 8; + } + } + + /* + * And now let interrupts come in. + * sti() is not enough, we need to + * lower priority, too. + */ + __asm__ __volatile__("getcon " __SR ", %0\n\t" + "and %0, %1, %0\n\t" + "putcon %0, " __SR "\n\t" + : "=&r" (__dummy0) + : "r" (__dummy1)); +} diff --git a/arch/sh/kernel/cpu/irq/intc.c b/arch/sh/kernel/cpu/irq/intc.c index 6ac018c15e03..84806b2027f8 100644 --- a/arch/sh/kernel/cpu/irq/intc.c +++ b/arch/sh/kernel/cpu/irq/intc.c @@ -335,31 +335,6 @@ static intc_enum __init intc_grp_id(struct intc_desc *desc, return 0; } -static unsigned int __init intc_prio_value(struct intc_desc *desc, - intc_enum enum_id, int do_grps) -{ - struct intc_prio *p = desc->priorities; - unsigned int i; - - for (i = 0; p && enum_id && i < desc->nr_priorities; i++) { - p = desc->priorities + i; - - if (p->enum_id != enum_id) - continue; - - return p->priority; - } - - if (do_grps) - return intc_prio_value(desc, intc_grp_id(desc, enum_id), 0); - - /* default to the lowest priority possible if no priority is set - * - this needs to be at least 2 for 5-bit priorities on 7780 - */ - - return 2; -} - static unsigned int __init intc_mask_data(struct intc_desc *desc, struct intc_desc_int *d, intc_enum enum_id, int do_grps) @@ -518,8 +493,10 @@ static void __init intc_register_irq(struct intc_desc *desc, handle_level_irq, "level"); set_irq_chip_data(irq, (void *)data[primary]); - /* record the desired priority level */ - intc_prio_level[irq] = intc_prio_value(desc, enum_id, 1); + /* set priority level + * - this needs to be at least 2 for 5-bit priorities on 7780 + */ + intc_prio_level[irq] = 2; /* enable secondary masking method if present */ if (data[!primary]) diff --git a/arch/sh/kernel/cpu/sh2/entry.S b/arch/sh/kernel/cpu/sh2/entry.S index ee8f1fe84b08..7a26569e7956 100644 --- a/arch/sh/kernel/cpu/sh2/entry.S +++ b/arch/sh/kernel/cpu/sh2/entry.S @@ -149,6 +149,14 @@ ENTRY(exception_handler) mov #32,r8 cmp/hs r8,r9 bt trap_entry ! 64 > vec >= 32 is trap + +#if defined(CONFIG_SH_FPU) + mov #13,r8 + cmp/eq r8,r9 + bt 10f ! fpu + nop +#endif + mov.l 4f,r8 mov r9,r4 shll2 r9 @@ -158,6 +166,10 @@ ENTRY(exception_handler) cmp/eq r9,r8 bf 3f mov.l 8f,r8 ! unhandled exception +#if defined(CONFIG_SH_FPU) +10: + mov.l 9f, r8 ! unhandled exception +#endif 3: mov.l 5f,r10 jmp @r8 @@ -177,7 +189,10 @@ interrupt_entry: 6: .long ret_from_irq 7: .long do_IRQ 8: .long do_exception_error - +#ifdef CONFIG_SH_FPU +9: .long fpu_error_trap_handler +#endif + trap_entry: mov #0x30,r8 cmp/ge r8,r9 ! vector 0x20-0x2f is systemcall @@ -250,7 +265,7 @@ ENTRY(sh_bios_handler) 1: .long gdb_vbr_vector #endif /* CONFIG_SH_STANDARD_BIOS */ -ENTRY(address_error_handler) +ENTRY(address_error_trap_handler) mov r15,r4 ! regs add #4,r4 mov #OFF_PC,r0 diff --git a/arch/sh/kernel/cpu/sh2/setup-sh7619.c b/arch/sh/kernel/cpu/sh2/setup-sh7619.c index ec6adc3f306f..b230eb278cef 100644 --- a/arch/sh/kernel/cpu/sh2/setup-sh7619.c +++ b/arch/sh/kernel/cpu/sh2/setup-sh7619.c @@ -65,7 +65,7 @@ static struct intc_prio_reg prio_registers[] __initdata = { }; static DECLARE_INTC_DESC(intc_desc, "sh7619", vectors, groups, - NULL, NULL, prio_registers, NULL); + NULL, prio_registers, NULL); static struct plat_sci_port sci_platform_data[] = { { diff --git a/arch/sh/kernel/cpu/sh2a/Makefile b/arch/sh/kernel/cpu/sh2a/Makefile index 965fa2572b23..b279cdc3a233 100644 --- a/arch/sh/kernel/cpu/sh2a/Makefile +++ b/arch/sh/kernel/cpu/sh2a/Makefile @@ -6,4 +6,8 @@ obj-y := common.o probe.o opcode_helper.o common-y += $(addprefix ../sh2/, ex.o entry.o) +obj-$(CONFIG_SH_FPU) += fpu.o + obj-$(CONFIG_CPU_SUBTYPE_SH7206) += setup-sh7206.o clock-sh7206.o +obj-$(CONFIG_CPU_SUBTYPE_SH7203) += setup-sh7203.o clock-sh7203.o +obj-$(CONFIG_CPU_SUBTYPE_SH7263) += setup-sh7203.o clock-sh7203.o diff --git a/arch/sh/kernel/cpu/sh2a/clock-sh7203.c b/arch/sh/kernel/cpu/sh2a/clock-sh7203.c new file mode 100644 index 000000000000..3feb95a4fcbc --- /dev/null +++ b/arch/sh/kernel/cpu/sh2a/clock-sh7203.c @@ -0,0 +1,89 @@ +/* + * arch/sh/kernel/cpu/sh2a/clock-sh7203.c + * + * SH7203 support for the clock framework + * + * Copyright (C) 2007 Kieran Bingham (MPC-Data Ltd) + * + * Based on clock-sh7263.c + * Copyright (C) 2006 Yoshinori Sato + * + * Based on clock-sh4.c + * Copyright (C) 2005 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/init.h> +#include <linux/kernel.h> +#include <asm/clock.h> +#include <asm/freq.h> +#include <asm/io.h> + +const static int pll1rate[]={8,12,16,0}; +const static int pfc_divisors[]={1,2,3,4,6,8,12}; +#define ifc_divisors pfc_divisors + +#if (CONFIG_SH_CLK_MD == 0) +#define PLL2 (1) +#elif (CONFIG_SH_CLK_MD == 1) +#define PLL2 (2) +#elif (CONFIG_SH_CLK_MD == 2) +#define PLL2 (4) +#elif (CONFIG_SH_CLK_MD == 3) +#define PLL2 (4) +#else +#error "Illegal Clock Mode!" +#endif + +static void master_clk_init(struct clk *clk) +{ + clk->rate *= pll1rate[(ctrl_inw(FREQCR) >> 8) & 0x0003] * PLL2 ; +} + +static struct clk_ops sh7203_master_clk_ops = { + .init = master_clk_init, +}; + +static void module_clk_recalc(struct clk *clk) +{ + int idx = (ctrl_inw(FREQCR) & 0x0007); + clk->rate = clk->parent->rate / pfc_divisors[idx]; +} + +static struct clk_ops sh7203_module_clk_ops = { + .recalc = module_clk_recalc, +}; + +static void bus_clk_recalc(struct clk *clk) +{ + int idx = (ctrl_inw(FREQCR) & 0x0007); + clk->rate = clk->parent->rate / pfc_divisors[idx-2]; +} + +static struct clk_ops sh7203_bus_clk_ops = { + .recalc = bus_clk_recalc, +}; + +static void cpu_clk_recalc(struct clk *clk) +{ + clk->rate = clk->parent->rate; +} + +static struct clk_ops sh7203_cpu_clk_ops = { + .recalc = cpu_clk_recalc, +}; + +static struct clk_ops *sh7203_clk_ops[] = { + &sh7203_master_clk_ops, + &sh7203_module_clk_ops, + &sh7203_bus_clk_ops, + &sh7203_cpu_clk_ops, +}; + +void __init arch_init_clk_ops(struct clk_ops **ops, int idx) +{ + if (idx < ARRAY_SIZE(sh7203_clk_ops)) + *ops = sh7203_clk_ops[idx]; +} diff --git a/arch/sh/kernel/cpu/sh2a/fpu.c b/arch/sh/kernel/cpu/sh2a/fpu.c new file mode 100644 index 000000000000..ff99562456fb --- /dev/null +++ b/arch/sh/kernel/cpu/sh2a/fpu.c @@ -0,0 +1,633 @@ +/* + * Save/restore floating point context for signal handlers. + * + * Copyright (C) 1999, 2000 Kaz Kojima & Niibe Yutaka + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * FIXME! These routines can be optimized in big endian case. + */ +#include <linux/sched.h> +#include <linux/signal.h> +#include <asm/processor.h> +#include <asm/io.h> + +/* The PR (precision) bit in the FP Status Register must be clear when + * an frchg instruction is executed, otherwise the instruction is undefined. + * Executing frchg with PR set causes a trap on some SH4 implementations. + */ + +#define FPSCR_RCHG 0x00000000 + + +/* + * Save FPU registers onto task structure. + * Assume called with FPU enabled (SR.FD=0). + */ +void +save_fpu(struct task_struct *tsk, struct pt_regs *regs) +{ + unsigned long dummy; + + clear_tsk_thread_flag(tsk, TIF_USEDFPU); + enable_fpu(); + asm volatile("sts.l fpul, @-%0\n\t" + "sts.l fpscr, @-%0\n\t" + "fmov.s fr15, @-%0\n\t" + "fmov.s fr14, @-%0\n\t" + "fmov.s fr13, @-%0\n\t" + "fmov.s fr12, @-%0\n\t" + "fmov.s fr11, @-%0\n\t" + "fmov.s fr10, @-%0\n\t" + "fmov.s fr9, @-%0\n\t" + "fmov.s fr8, @-%0\n\t" + "fmov.s fr7, @-%0\n\t" + "fmov.s fr6, @-%0\n\t" + "fmov.s fr5, @-%0\n\t" + "fmov.s fr4, @-%0\n\t" + "fmov.s fr3, @-%0\n\t" + "fmov.s fr2, @-%0\n\t" + "fmov.s fr1, @-%0\n\t" + "fmov.s fr0, @-%0\n\t" + "lds %3, fpscr\n\t" + : "=r" (dummy) + : "0" ((char *)(&tsk->thread.fpu.hard.status)), + "r" (FPSCR_RCHG), + "r" (FPSCR_INIT) + : "memory"); + + disable_fpu(); + release_fpu(regs); +} + +static void +restore_fpu(struct task_struct *tsk) +{ + unsigned long dummy; + + enable_fpu(); + asm volatile("fmov.s @%0+, fr0\n\t" + "fmov.s @%0+, fr1\n\t" + "fmov.s @%0+, fr2\n\t" + "fmov.s @%0+, fr3\n\t" + "fmov.s @%0+, fr4\n\t" + "fmov.s @%0+, fr5\n\t" + "fmov.s @%0+, fr6\n\t" + "fmov.s @%0+, fr7\n\t" + "fmov.s @%0+, fr8\n\t" + "fmov.s @%0+, fr9\n\t" + "fmov.s @%0+, fr10\n\t" + "fmov.s @%0+, fr11\n\t" + "fmov.s @%0+, fr12\n\t" + "fmov.s @%0+, fr13\n\t" + "fmov.s @%0+, fr14\n\t" + "fmov.s @%0+, fr15\n\t" + "lds.l @%0+, fpscr\n\t" + "lds.l @%0+, fpul\n\t" + : "=r" (dummy) + : "0" (&tsk->thread.fpu), "r" (FPSCR_RCHG) + : "memory"); + disable_fpu(); +} + +/* + * Load the FPU with signalling NANS. This bit pattern we're using + * has the property that no matter wether considered as single or as + * double precission represents signaling NANS. + */ + +static void +fpu_init(void) +{ + enable_fpu(); + asm volatile("lds %0, fpul\n\t" + "fsts fpul, fr0\n\t" + "fsts fpul, fr1\n\t" + "fsts fpul, fr2\n\t" + "fsts fpul, fr3\n\t" + "fsts fpul, fr4\n\t" + "fsts fpul, fr5\n\t" + "fsts fpul, fr6\n\t" + "fsts fpul, fr7\n\t" + "fsts fpul, fr8\n\t" + "fsts fpul, fr9\n\t" + "fsts fpul, fr10\n\t" + "fsts fpul, fr11\n\t" + "fsts fpul, fr12\n\t" + "fsts fpul, fr13\n\t" + "fsts fpul, fr14\n\t" + "fsts fpul, fr15\n\t" + "lds %2, fpscr\n\t" + : /* no output */ + : "r" (0), "r" (FPSCR_RCHG), "r" (FPSCR_INIT)); + disable_fpu(); +} + +/* + * Emulate arithmetic ops on denormalized number for some FPU insns. + */ + +/* denormalized float * float */ +static int denormal_mulf(int hx, int hy) +{ + unsigned int ix, iy; + unsigned long long m, n; + int exp, w; + + ix = hx & 0x7fffffff; + iy = hy & 0x7fffffff; + if (iy < 0x00800000 || ix == 0) + return ((hx ^ hy) & 0x80000000); + + exp = (iy & 0x7f800000) >> 23; + ix &= 0x007fffff; + iy = (iy & 0x007fffff) | 0x00800000; + m = (unsigned long long)ix * iy; + n = m; + w = -1; + while (n) { n >>= 1; w++; } + + /* FIXME: use guard bits */ + exp += w - 126 - 46; + if (exp > 0) + ix = ((int) (m >> (w - 23)) & 0x007fffff) | (exp << 23); + else if (exp + 22 >= 0) + ix = (int) (m >> (w - 22 - exp)) & 0x007fffff; + else + ix = 0; + + ix |= (hx ^ hy) & 0x80000000; + return ix; +} + +/* denormalized double * double */ +static void mult64(unsigned long long x, unsigned long long y, + unsigned long long *highp, unsigned long long *lowp) +{ + unsigned long long sub0, sub1, sub2, sub3; + unsigned long long high, low; + + sub0 = (x >> 32) * (unsigned long) (y >> 32); + sub1 = (x & 0xffffffffLL) * (unsigned long) (y >> 32); + sub2 = (x >> 32) * (unsigned long) (y & 0xffffffffLL); + sub3 = (x & 0xffffffffLL) * (unsigned long) (y & 0xffffffffLL); + low = sub3; + high = 0LL; + sub3 += (sub1 << 32); + if (low > sub3) + high++; + low = sub3; + sub3 += (sub2 << 32); + if (low > sub3) + high++; + low = sub3; + high += (sub1 >> 32) + (sub2 >> 32); + high += sub0; + *lowp = low; + *highp = high; +} + +static inline long long rshift64(unsigned long long mh, + unsigned long long ml, int n) +{ + if (n >= 64) + return mh >> (n - 64); + return (mh << (64 - n)) | (ml >> n); +} + +static long long denormal_muld(long long hx, long long hy) +{ + unsigned long long ix, iy; + unsigned long long mh, ml, nh, nl; + int exp, w; + + ix = hx & 0x7fffffffffffffffLL; + iy = hy & 0x7fffffffffffffffLL; + if (iy < 0x0010000000000000LL || ix == 0) + return ((hx ^ hy) & 0x8000000000000000LL); + + exp = (iy & 0x7ff0000000000000LL) >> 52; + ix &= 0x000fffffffffffffLL; + iy = (iy & 0x000fffffffffffffLL) | 0x0010000000000000LL; + mult64(ix, iy, &mh, &ml); + nh = mh; + nl = ml; + w = -1; + if (nh) { + while (nh) { nh >>= 1; w++;} + w += 64; + } else + while (nl) { nl >>= 1; w++;} + + /* FIXME: use guard bits */ + exp += w - 1022 - 52 * 2; + if (exp > 0) + ix = (rshift64(mh, ml, w - 52) & 0x000fffffffffffffLL) + | ((long long)exp << 52); + else if (exp + 51 >= 0) + ix = rshift64(mh, ml, w - 51 - exp) & 0x000fffffffffffffLL; + else + ix = 0; + + ix |= (hx ^ hy) & 0x8000000000000000LL; + return ix; +} + +/* ix - iy where iy: denormal and ix, iy >= 0 */ +static int denormal_subf1(unsigned int ix, unsigned int iy) +{ + int frac; + int exp; + + if (ix < 0x00800000) + return ix - iy; + + exp = (ix & 0x7f800000) >> 23; + if (exp - 1 > 31) + return ix; + iy >>= exp - 1; + if (iy == 0) + return ix; + + frac = (ix & 0x007fffff) | 0x00800000; + frac -= iy; + while (frac < 0x00800000) { + if (--exp == 0) + return frac; + frac <<= 1; + } + + return (exp << 23) | (frac & 0x007fffff); +} + +/* ix + iy where iy: denormal and ix, iy >= 0 */ +static int denormal_addf1(unsigned int ix, unsigned int iy) +{ + int frac; + int exp; + + if (ix < 0x00800000) + return ix + iy; + + exp = (ix & 0x7f800000) >> 23; + if (exp - 1 > 31) + return ix; + iy >>= exp - 1; + if (iy == 0) + return ix; + + frac = (ix & 0x007fffff) | 0x00800000; + frac += iy; + if (frac >= 0x01000000) { + frac >>= 1; + ++exp; + } + + return (exp << 23) | (frac & 0x007fffff); +} + +static int denormal_addf(int hx, int hy) +{ + unsigned int ix, iy; + int sign; + + if ((hx ^ hy) & 0x80000000) { + sign = hx & 0x80000000; + ix = hx & 0x7fffffff; + iy = hy & 0x7fffffff; + if (iy < 0x00800000) { + ix = denormal_subf1(ix, iy); + if (ix < 0) { + ix = -ix; + sign ^= 0x80000000; + } + } else { + ix = denormal_subf1(iy, ix); + sign ^= 0x80000000; + } + } else { + sign = hx & 0x80000000; + ix = hx & 0x7fffffff; + iy = hy & 0x7fffffff; + if (iy < 0x00800000) + ix = denormal_addf1(ix, iy); + else + ix = denormal_addf1(iy, ix); + } + + return sign | ix; +} + +/* ix - iy where iy: denormal and ix, iy >= 0 */ +static long long denormal_subd1(unsigned long long ix, unsigned long long iy) +{ + long long frac; + int exp; + + if (ix < 0x0010000000000000LL) + return ix - iy; + + exp = (ix & 0x7ff0000000000000LL) >> 52; + if (exp - 1 > 63) + return ix; + iy >>= exp - 1; + if (iy == 0) + return ix; + + frac = (ix & 0x000fffffffffffffLL) | 0x0010000000000000LL; + frac -= iy; + while (frac < 0x0010000000000000LL) { + if (--exp == 0) + return frac; + frac <<= 1; + } + + return ((long long)exp << 52) | (frac & 0x000fffffffffffffLL); +} + +/* ix + iy where iy: denormal and ix, iy >= 0 */ +static long long denormal_addd1(unsigned long long ix, unsigned long long iy) +{ + long long frac; + long long exp; + + if (ix < 0x0010000000000000LL) + return ix + iy; + + exp = (ix & 0x7ff0000000000000LL) >> 52; + if (exp - 1 > 63) + return ix; + iy >>= exp - 1; + if (iy == 0) + return ix; + + frac = (ix & 0x000fffffffffffffLL) | 0x0010000000000000LL; + frac += iy; + if (frac >= 0x0020000000000000LL) { + frac >>= 1; + ++exp; + } + + return (exp << 52) | (frac & 0x000fffffffffffffLL); +} + +static long long denormal_addd(long long hx, long long hy) +{ + unsigned long long ix, iy; + long long sign; + + if ((hx ^ hy) & 0x8000000000000000LL) { + sign = hx & 0x8000000000000000LL; + ix = hx & 0x7fffffffffffffffLL; + iy = hy & 0x7fffffffffffffffLL; + if (iy < 0x0010000000000000LL) { + ix = denormal_subd1(ix, iy); + if (ix < 0) { + ix = -ix; + sign ^= 0x8000000000000000LL; + } + } else { + ix = denormal_subd1(iy, ix); + sign ^= 0x8000000000000000LL; + } + } else { + sign = hx & 0x8000000000000000LL; + ix = hx & 0x7fffffffffffffffLL; + iy = hy & 0x7fffffffffffffffLL; + if (iy < 0x0010000000000000LL) + ix = denormal_addd1(ix, iy); + else + ix = denormal_addd1(iy, ix); + } + + return sign | ix; +} + +/** + * denormal_to_double - Given denormalized float number, + * store double float + * + * @fpu: Pointer to sh_fpu_hard structure + * @n: Index to FP register + */ +static void +denormal_to_double (struct sh_fpu_hard_struct *fpu, int n) +{ + unsigned long du, dl; + unsigned long x = fpu->fpul; + int exp = 1023 - 126; + + if (x != 0 && (x & 0x7f800000) == 0) { + du = (x & 0x80000000); + while ((x & 0x00800000) == 0) { + x <<= 1; + exp--; + } + x &= 0x007fffff; + du |= (exp << 20) | (x >> 3); + dl = x << 29; + + fpu->fp_regs[n] = du; + fpu->fp_regs[n+1] = dl; + } +} + +/** + * ieee_fpe_handler - Handle denormalized number exception + * + * @regs: Pointer to register structure + * + * Returns 1 when it's handled (should not cause exception). + */ +static int +ieee_fpe_handler (struct pt_regs *regs) +{ + unsigned short insn = *(unsigned short *) regs->pc; + unsigned short finsn; + unsigned long nextpc; + int nib[4] = { + (insn >> 12) & 0xf, + (insn >> 8) & 0xf, + (insn >> 4) & 0xf, + insn & 0xf}; + + if (nib[0] == 0xb || + (nib[0] == 0x4 && nib[2] == 0x0 && nib[3] == 0xb)) /* bsr & jsr */ + regs->pr = regs->pc + 4; + if (nib[0] == 0xa || nib[0] == 0xb) { /* bra & bsr */ + nextpc = regs->pc + 4 + ((short) ((insn & 0xfff) << 4) >> 3); + finsn = *(unsigned short *) (regs->pc + 2); + } else if (nib[0] == 0x8 && nib[1] == 0xd) { /* bt/s */ + if (regs->sr & 1) + nextpc = regs->pc + 4 + ((char) (insn & 0xff) << 1); + else + nextpc = regs->pc + 4; + finsn = *(unsigned short *) (regs->pc + 2); + } else if (nib[0] == 0x8 && nib[1] == 0xf) { /* bf/s */ + if (regs->sr & 1) + nextpc = regs->pc + 4; + else + nextpc = regs->pc + 4 + ((char) (insn & 0xff) << 1); + finsn = *(unsigned short *) (regs->pc + 2); + } else if (nib[0] == 0x4 && nib[3] == 0xb && + (nib[2] == 0x0 || nib[2] == 0x2)) { /* jmp & jsr */ + nextpc = regs->regs[nib[1]]; + finsn = *(unsigned short *) (regs->pc + 2); + } else if (nib[0] == 0x0 && nib[3] == 0x3 && + (nib[2] == 0x0 || nib[2] == 0x2)) { /* braf & bsrf */ + nextpc = regs->pc + 4 + regs->regs[nib[1]]; + finsn = *(unsigned short *) (regs->pc + 2); + } else if (insn == 0x000b) { /* rts */ + nextpc = regs->pr; + finsn = *(unsigned short *) (regs->pc + 2); + } else { + nextpc = regs->pc + 2; + finsn = insn; + } + +#define FPSCR_FPU_ERROR (1 << 17) + + if ((finsn & 0xf1ff) == 0xf0ad) { /* fcnvsd */ + struct task_struct *tsk = current; + + if ((tsk->thread.fpu.hard.fpscr & FPSCR_FPU_ERROR)) { + /* FPU error */ + denormal_to_double (&tsk->thread.fpu.hard, + (finsn >> 8) & 0xf); + } else + return 0; + + regs->pc = nextpc; + return 1; + } else if ((finsn & 0xf00f) == 0xf002) { /* fmul */ + struct task_struct *tsk = current; + int fpscr; + int n, m, prec; + unsigned int hx, hy; + + n = (finsn >> 8) & 0xf; + m = (finsn >> 4) & 0xf; + hx = tsk->thread.fpu.hard.fp_regs[n]; + hy = tsk->thread.fpu.hard.fp_regs[m]; + fpscr = tsk->thread.fpu.hard.fpscr; + prec = fpscr & (1 << 19); + + if ((fpscr & FPSCR_FPU_ERROR) + && (prec && ((hx & 0x7fffffff) < 0x00100000 + || (hy & 0x7fffffff) < 0x00100000))) { + long long llx, lly; + + /* FPU error because of denormal */ + llx = ((long long) hx << 32) + | tsk->thread.fpu.hard.fp_regs[n+1]; + lly = ((long long) hy << 32) + | tsk->thread.fpu.hard.fp_regs[m+1]; + if ((hx & 0x7fffffff) >= 0x00100000) + llx = denormal_muld(lly, llx); + else + llx = denormal_muld(llx, lly); + tsk->thread.fpu.hard.fp_regs[n] = llx >> 32; + tsk->thread.fpu.hard.fp_regs[n+1] = llx & 0xffffffff; + } else if ((fpscr & FPSCR_FPU_ERROR) + && (!prec && ((hx & 0x7fffffff) < 0x00800000 + || (hy & 0x7fffffff) < 0x00800000))) { + /* FPU error because of denormal */ + if ((hx & 0x7fffffff) >= 0x00800000) + hx = denormal_mulf(hy, hx); + else + hx = denormal_mulf(hx, hy); + tsk->thread.fpu.hard.fp_regs[n] = hx; + } else + return 0; + + regs->pc = nextpc; + return 1; + } else if ((finsn & 0xf00e) == 0xf000) { /* fadd, fsub */ + struct task_struct *tsk = current; + int fpscr; + int n, m, prec; + unsigned int hx, hy; + + n = (finsn >> 8) & 0xf; + m = (finsn >> 4) & 0xf; + hx = tsk->thread.fpu.hard.fp_regs[n]; + hy = tsk->thread.fpu.hard.fp_regs[m]; + fpscr = tsk->thread.fpu.hard.fpscr; + prec = fpscr & (1 << 19); + + if ((fpscr & FPSCR_FPU_ERROR) + && (prec && ((hx & 0x7fffffff) < 0x00100000 + || (hy & 0x7fffffff) < 0x00100000))) { + long long llx, lly; + + /* FPU error because of denormal */ + llx = ((long long) hx << 32) + | tsk->thread.fpu.hard.fp_regs[n+1]; + lly = ((long long) hy << 32) + | tsk->thread.fpu.hard.fp_regs[m+1]; + if ((finsn & 0xf00f) == 0xf000) + llx = denormal_addd(llx, lly); + else + llx = denormal_addd(llx, lly ^ (1LL << 63)); + tsk->thread.fpu.hard.fp_regs[n] = llx >> 32; + tsk->thread.fpu.hard.fp_regs[n+1] = llx & 0xffffffff; + } else if ((fpscr & FPSCR_FPU_ERROR) + && (!prec && ((hx & 0x7fffffff) < 0x00800000 + || (hy & 0x7fffffff) < 0x00800000))) { + /* FPU error because of denormal */ + if ((finsn & 0xf00f) == 0xf000) + hx = denormal_addf(hx, hy); + else + hx = denormal_addf(hx, hy ^ 0x80000000); + tsk->thread.fpu.hard.fp_regs[n] = hx; + } else + return 0; + + regs->pc = nextpc; + return 1; + } + + return 0; +} + +BUILD_TRAP_HANDLER(fpu_error) +{ + struct task_struct *tsk = current; + TRAP_HANDLER_DECL; + + save_fpu(tsk, regs); + if (ieee_fpe_handler(regs)) { + tsk->thread.fpu.hard.fpscr &= + ~(FPSCR_CAUSE_MASK | FPSCR_FLAG_MASK); + grab_fpu(regs); + restore_fpu(tsk); + set_tsk_thread_flag(tsk, TIF_USEDFPU); + return; + } + + force_sig(SIGFPE, tsk); +} + +BUILD_TRAP_HANDLER(fpu_state_restore) +{ + struct task_struct *tsk = current; + TRAP_HANDLER_DECL; + + grab_fpu(regs); + if (!user_mode(regs)) { + printk(KERN_ERR "BUG: FPU is used in kernel mode.\n"); + return; + } + + if (used_math()) { + /* Using the FPU again. */ + restore_fpu(tsk); + } else { + /* First time FPU user. */ + fpu_init(); + set_used_math(); + } + set_tsk_thread_flag(tsk, TIF_USEDFPU); +} diff --git a/arch/sh/kernel/cpu/sh2a/probe.c b/arch/sh/kernel/cpu/sh2a/probe.c index 6d02465704b9..6910e2664468 100644 --- a/arch/sh/kernel/cpu/sh2a/probe.c +++ b/arch/sh/kernel/cpu/sh2a/probe.c @@ -3,25 +3,36 @@ * * CPU Subtype Probing for SH-2A. * - * Copyright (C) 2004, 2005 Paul Mundt + * Copyright (C) 2004 - 2007 Paul Mundt * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive * for more details. */ - #include <linux/init.h> #include <asm/processor.h> #include <asm/cache.h> int __init detect_cpu_and_cache_system(void) { - /* Just SH7206 for now .. */ - boot_cpu_data.type = CPU_SH7206; + /* All SH-2A CPUs have support for 16 and 32-bit opcodes.. */ boot_cpu_data.flags |= CPU_HAS_OP32; +#if defined(CONFIG_CPU_SUBTYPE_SH7203) + boot_cpu_data.type = CPU_SH7203; + /* SH7203 has an FPU.. */ + boot_cpu_data.flags |= CPU_HAS_FPU; +#elif defined(CONFIG_CPU_SUBTYPE_SH7263) + boot_cpu_data.type = CPU_SH7263; + boot_cpu_data.flags |= CPU_HAS_FPU; +#elif defined(CONFIG_CPU_SUBTYPE_SH7206) + boot_cpu_data.type = CPU_SH7206; + /* While SH7206 has a DSP.. */ + boot_cpu_data.flags |= CPU_HAS_DSP; +#endif + boot_cpu_data.dcache.ways = 4; - boot_cpu_data.dcache.way_incr = (1 << 11); + boot_cpu_data.dcache.way_incr = (1 << 11); boot_cpu_data.dcache.sets = 128; boot_cpu_data.dcache.entry_shift = 4; boot_cpu_data.dcache.linesz = L1_CACHE_BYTES; @@ -37,4 +48,3 @@ int __init detect_cpu_and_cache_system(void) return 0; } - diff --git a/arch/sh/kernel/cpu/sh2a/setup-sh7203.c b/arch/sh/kernel/cpu/sh2a/setup-sh7203.c new file mode 100644 index 000000000000..db6ef5cecde1 --- /dev/null +++ b/arch/sh/kernel/cpu/sh2a/setup-sh7203.c @@ -0,0 +1,319 @@ +/* + * SH7203 and SH7263 Setup + * + * Copyright (C) 2007 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/platform_device.h> +#include <linux/init.h> +#include <linux/serial.h> +#include <asm/sci.h> + +enum { + UNUSED = 0, + + /* interrupt sources */ + IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7, + PINT0, PINT1, PINT2, PINT3, PINT4, PINT5, PINT6, PINT7, + DMAC0_DEI, DMAC0_HEI, DMAC1_DEI, DMAC1_HEI, + DMAC2_DEI, DMAC2_HEI, DMAC3_DEI, DMAC3_HEI, + DMAC4_DEI, DMAC4_HEI, DMAC5_DEI, DMAC5_HEI, + DMAC6_DEI, DMAC6_HEI, DMAC7_DEI, DMAC7_HEI, + USB, LCDC, CMT0, CMT1, BSC, WDT, + MTU2_TGI0A, MTU2_TGI0B, MTU2_TGI0C, MTU2_TGI0D, + MTU2_TCI0V, MTU2_TGI0E, MTU2_TGI0F, + MTU2_TGI1A, MTU2_TGI1B, MTU2_TCI1V, MTU2_TCI1U, + MTU2_TGI2A, MTU2_TGI2B, MTU2_TCI2V, MTU2_TCI2U, + MTU2_TGI3A, MTU2_TGI3B, MTU2_TGI3C, MTU2_TGI3D, MTU2_TCI3V, + MTU2_TGI4A, MTU2_TGI4B, MTU2_TGI4C, MTU2_TGI4D, MTU2_TCI4V, + ADC_ADI, + IIC30_STPI, IIC30_NAKI, IIC30_RXI, IIC30_TXI, IIC30_TEI, + IIC31_STPI, IIC31_NAKI, IIC31_RXI, IIC31_TXI, IIC31_TEI, + IIC32_STPI, IIC32_NAKI, IIC32_RXI, IIC32_TXI, IIC32_TEI, + IIC33_STPI, IIC33_NAKI, IIC33_RXI, IIC33_TXI, IIC33_TEI, + SCIF0_BRI, SCIF0_ERI, SCIF0_RXI, SCIF0_TXI, + SCIF1_BRI, SCIF1_ERI, SCIF1_RXI, SCIF1_TXI, + SCIF2_BRI, SCIF2_ERI, SCIF2_RXI, SCIF2_TXI, + SCIF3_BRI, SCIF3_ERI, SCIF3_RXI, SCIF3_TXI, + SSU0_SSERI, SSU0_SSRXI, SSU0_SSTXI, + SSU1_SSERI, SSU1_SSRXI, SSU1_SSTXI, + SSI0_SSII, SSI1_SSII, SSI2_SSII, SSI3_SSII, + + /* ROM-DEC, SDHI, SRC, and IEB are SH7263 specific */ + ROMDEC_ISY, ROMDEC_IERR, ROMDEC_IARG, ROMDEC_ISEC, ROMDEC_IBUF, + ROMDEC_IREADY, + + FLCTL_FLSTEI, FLCTL_FLTENDI, FLCTL_FLTREQ0I, FLCTL_FLTREQ1I, + + SDHI3, SDHI0, SDHI1, + + RTC_ARM, RTC_PRD, RTC_CUP, + RCAN0_ERS, RCAN0_OVR, RCAN0_RM0, RCAN0_RM1, RCAN0_SLE, + RCAN1_ERS, RCAN1_OVR, RCAN1_RM0, RCAN1_RM1, RCAN1_SLE, + + SRC_OVF, SRC_ODFI, SRC_IDEI, IEBI, + + /* interrupt groups */ + PINT, DMAC0, DMAC1, DMAC2, DMAC3, DMAC4, DMAC5, DMAC6, DMAC7, + MTU0_ABCD, MTU0_VEF, MTU1_AB, MTU1_VU, MTU2_AB, MTU2_VU, + MTU3_ABCD, MTU4_ABCD, + IIC30, IIC31, IIC32, IIC33, SCIF0, SCIF1, SCIF2, SCIF3, + SSU0, SSU1, ROMDEC, SDHI, FLCTL, RTC, RCAN0, RCAN1, SRC +}; + +static struct intc_vect vectors[] __initdata = { + INTC_IRQ(IRQ0, 64), INTC_IRQ(IRQ1, 65), + INTC_IRQ(IRQ2, 66), INTC_IRQ(IRQ3, 67), + INTC_IRQ(IRQ4, 68), INTC_IRQ(IRQ5, 69), + INTC_IRQ(IRQ6, 70), INTC_IRQ(IRQ7, 71), + INTC_IRQ(PINT0, 80), INTC_IRQ(PINT1, 81), + INTC_IRQ(PINT2, 82), INTC_IRQ(PINT3, 83), + INTC_IRQ(PINT4, 84), INTC_IRQ(PINT5, 85), + INTC_IRQ(PINT6, 86), INTC_IRQ(PINT7, 87), + INTC_IRQ(DMAC0_DEI, 108), INTC_IRQ(DMAC0_HEI, 109), + INTC_IRQ(DMAC1_DEI, 112), INTC_IRQ(DMAC1_HEI, 113), + INTC_IRQ(DMAC2_DEI, 116), INTC_IRQ(DMAC2_HEI, 117), + INTC_IRQ(DMAC3_DEI, 120), INTC_IRQ(DMAC3_HEI, 121), + INTC_IRQ(DMAC4_DEI, 124), INTC_IRQ(DMAC4_HEI, 125), + INTC_IRQ(DMAC5_DEI, 128), INTC_IRQ(DMAC5_HEI, 129), + INTC_IRQ(DMAC6_DEI, 132), INTC_IRQ(DMAC6_HEI, 133), + INTC_IRQ(DMAC7_DEI, 136), INTC_IRQ(DMAC7_HEI, 137), + INTC_IRQ(USB, 140), INTC_IRQ(LCDC, 141), + INTC_IRQ(CMT0, 142), INTC_IRQ(CMT1, 143), + INTC_IRQ(BSC, 144), INTC_IRQ(WDT, 145), + INTC_IRQ(MTU2_TGI0A, 146), INTC_IRQ(MTU2_TGI0B, 147), + INTC_IRQ(MTU2_TGI0C, 148), INTC_IRQ(MTU2_TGI0D, 149), + INTC_IRQ(MTU2_TCI0V, 150), + INTC_IRQ(MTU2_TGI0E, 151), INTC_IRQ(MTU2_TGI0F, 152), + INTC_IRQ(MTU2_TGI1A, 153), INTC_IRQ(MTU2_TGI1B, 154), + INTC_IRQ(MTU2_TCI1V, 155), INTC_IRQ(MTU2_TCI1U, 156), + INTC_IRQ(MTU2_TGI2A, 157), INTC_IRQ(MTU2_TGI2B, 158), + INTC_IRQ(MTU2_TCI2V, 159), INTC_IRQ(MTU2_TCI2U, 160), + INTC_IRQ(MTU2_TGI3A, 161), INTC_IRQ(MTU2_TGI3B, 162), + INTC_IRQ(MTU2_TGI3C, 163), INTC_IRQ(MTU2_TGI3D, 164), + INTC_IRQ(MTU2_TCI3V, 165), + INTC_IRQ(MTU2_TGI4A, 166), INTC_IRQ(MTU2_TGI4B, 167), + INTC_IRQ(MTU2_TGI4C, 168), INTC_IRQ(MTU2_TGI4D, 169), + INTC_IRQ(MTU2_TCI4V, 170), + INTC_IRQ(ADC_ADI, 171), + INTC_IRQ(IIC30_STPI, 172), INTC_IRQ(IIC30_NAKI, 173), + INTC_IRQ(IIC30_RXI, 174), INTC_IRQ(IIC30_TXI, 175), + INTC_IRQ(IIC30_TEI, 176), + INTC_IRQ(IIC31_STPI, 177), INTC_IRQ(IIC31_NAKI, 178), + INTC_IRQ(IIC31_RXI, 179), INTC_IRQ(IIC31_TXI, 180), + INTC_IRQ(IIC31_TEI, 181), + INTC_IRQ(IIC32_STPI, 182), INTC_IRQ(IIC32_NAKI, 183), + INTC_IRQ(IIC32_RXI, 184), INTC_IRQ(IIC32_TXI, 185), + INTC_IRQ(IIC32_TEI, 186), + INTC_IRQ(IIC33_STPI, 187), INTC_IRQ(IIC33_NAKI, 188), + INTC_IRQ(IIC33_RXI, 189), INTC_IRQ(IIC33_TXI, 190), + INTC_IRQ(IIC33_TEI, 191), + INTC_IRQ(SCIF0_BRI, 192), INTC_IRQ(SCIF0_ERI, 193), + INTC_IRQ(SCIF0_RXI, 194), INTC_IRQ(SCIF0_TXI, 195), + INTC_IRQ(SCIF1_BRI, 196), INTC_IRQ(SCIF1_ERI, 197), + INTC_IRQ(SCIF1_RXI, 198), INTC_IRQ(SCIF1_TXI, 199), + INTC_IRQ(SCIF2_BRI, 200), INTC_IRQ(SCIF2_ERI, 201), + INTC_IRQ(SCIF2_RXI, 202), INTC_IRQ(SCIF2_TXI, 203), + INTC_IRQ(SCIF3_BRI, 204), INTC_IRQ(SCIF3_ERI, 205), + INTC_IRQ(SCIF3_RXI, 206), INTC_IRQ(SCIF3_TXI, 207), + INTC_IRQ(SSU0_SSERI, 208), INTC_IRQ(SSU0_SSRXI, 209), + INTC_IRQ(SSU0_SSTXI, 210), + INTC_IRQ(SSU1_SSERI, 211), INTC_IRQ(SSU1_SSRXI, 212), + INTC_IRQ(SSU1_SSTXI, 213), + INTC_IRQ(SSI0_SSII, 214), INTC_IRQ(SSI1_SSII, 215), + INTC_IRQ(SSI2_SSII, 216), INTC_IRQ(SSI3_SSII, 217), + INTC_IRQ(FLCTL_FLSTEI, 224), INTC_IRQ(FLCTL_FLTENDI, 225), + INTC_IRQ(FLCTL_FLTREQ0I, 226), INTC_IRQ(FLCTL_FLTREQ1I, 227), + INTC_IRQ(RTC_ARM, 231), INTC_IRQ(RTC_PRD, 232), + INTC_IRQ(RTC_CUP, 233), + INTC_IRQ(RCAN0_ERS, 234), INTC_IRQ(RCAN0_OVR, 235), + INTC_IRQ(RCAN0_RM0, 236), INTC_IRQ(RCAN0_RM1, 237), + INTC_IRQ(RCAN0_SLE, 238), + INTC_IRQ(RCAN1_ERS, 239), INTC_IRQ(RCAN1_OVR, 240), + INTC_IRQ(RCAN1_RM0, 241), INTC_IRQ(RCAN1_RM1, 242), + INTC_IRQ(RCAN1_SLE, 243), + + /* SH7263-specific trash */ +#ifdef CONFIG_CPU_SUBTYPE_SH7263 + INTC_IRQ(ROMDEC_ISY, 218), INTC_IRQ(ROMDEC_IERR, 219), + INTC_IRQ(ROMDEC_IARG, 220), INTC_IRQ(ROMDEC_ISEC, 221), + INTC_IRQ(ROMDEC_IBUF, 222), INTC_IRQ(ROMDEC_IREADY, 223), + + INTC_IRQ(SDHI3, 228), INTC_IRQ(SDHI0, 229), INTC_IRQ(SDHI1, 230), + + INTC_IRQ(SRC_OVF, 244), INTC_IRQ(SRC_ODFI, 245), + INTC_IRQ(SRC_IDEI, 246), + + INTC_IRQ(IEBI, 247), +#endif +}; + +static struct intc_group groups[] __initdata = { + INTC_GROUP(PINT, PINT0, PINT1, PINT2, PINT3, + PINT4, PINT5, PINT6, PINT7), + INTC_GROUP(DMAC0, DMAC0_DEI, DMAC0_HEI), + INTC_GROUP(DMAC1, DMAC1_DEI, DMAC1_HEI), + INTC_GROUP(DMAC2, DMAC2_DEI, DMAC2_HEI), + INTC_GROUP(DMAC3, DMAC3_DEI, DMAC3_HEI), + INTC_GROUP(DMAC4, DMAC4_DEI, DMAC4_HEI), + INTC_GROUP(DMAC5, DMAC5_DEI, DMAC5_HEI), + INTC_GROUP(DMAC6, DMAC6_DEI, DMAC6_HEI), + INTC_GROUP(DMAC7, DMAC7_DEI, DMAC7_HEI), + INTC_GROUP(MTU0_ABCD, MTU2_TGI0A, MTU2_TGI0B, MTU2_TGI0C, MTU2_TGI0D), + INTC_GROUP(MTU0_VEF, MTU2_TCI0V, MTU2_TGI0E, MTU2_TGI0F), + INTC_GROUP(MTU1_AB, MTU2_TGI1A, MTU2_TGI1B), + INTC_GROUP(MTU1_VU, MTU2_TCI1V, MTU2_TCI1U), + INTC_GROUP(MTU2_AB, MTU2_TGI2A, MTU2_TGI2B), + INTC_GROUP(MTU2_VU, MTU2_TCI2V, MTU2_TCI2U), + INTC_GROUP(MTU3_ABCD, MTU2_TGI3A, MTU2_TGI3B, MTU2_TGI3C, MTU2_TGI3D), + INTC_GROUP(MTU4_ABCD, MTU2_TGI4A, MTU2_TGI4B, MTU2_TGI4C, MTU2_TGI4D), + INTC_GROUP(IIC30, IIC30_STPI, IIC30_NAKI, IIC30_RXI, IIC30_TXI, + IIC30_TEI), + INTC_GROUP(IIC31, IIC31_STPI, IIC31_NAKI, IIC31_RXI, IIC31_TXI, + IIC31_TEI), + INTC_GROUP(IIC32, IIC32_STPI, IIC32_NAKI, IIC32_RXI, IIC32_TXI, + IIC32_TEI), + INTC_GROUP(IIC33, IIC33_STPI, IIC33_NAKI, IIC33_RXI, IIC33_TXI, + IIC33_TEI), + INTC_GROUP(SCIF0, SCIF0_BRI, SCIF0_ERI, SCIF0_RXI, SCIF0_TXI), + INTC_GROUP(SCIF1, SCIF1_BRI, SCIF1_ERI, SCIF1_RXI, SCIF1_TXI), + INTC_GROUP(SCIF2, SCIF2_BRI, SCIF2_ERI, SCIF2_RXI, SCIF2_TXI), + INTC_GROUP(SCIF3, SCIF3_BRI, SCIF3_ERI, SCIF3_RXI, SCIF3_TXI), + INTC_GROUP(SSU0, SSU0_SSERI, SSU0_SSRXI, SSU0_SSTXI), + INTC_GROUP(SSU1, SSU1_SSERI, SSU1_SSRXI, SSU1_SSTXI), + INTC_GROUP(FLCTL, FLCTL_FLSTEI, FLCTL_FLTENDI, FLCTL_FLTREQ0I, + FLCTL_FLTREQ1I), + INTC_GROUP(RTC, RTC_ARM, RTC_PRD, RTC_CUP), + INTC_GROUP(RCAN0, RCAN0_ERS, RCAN0_OVR, RCAN0_RM0, RCAN0_RM1, + RCAN0_SLE), + INTC_GROUP(RCAN1, RCAN1_ERS, RCAN1_OVR, RCAN1_RM0, RCAN1_RM1, + RCAN1_SLE), + +#ifdef CONFIG_CPU_SUBTYPE_SH7263 + INTC_GROUP(ROMDEC, ROMDEC_ISY, ROMDEC_IERR, ROMDEC_IARG, + ROMDEC_ISEC, ROMDEC_IBUF, ROMDEC_IREADY), + INTC_GROUP(SDHI, SDHI3, SDHI0, SDHI1), + INTC_GROUP(SRC, SRC_OVF, SRC_ODFI, SRC_IDEI), +#endif +}; + +static struct intc_prio_reg prio_registers[] __initdata = { + { 0xfffe0818, 0, 16, 4, /* IPR01 */ { IRQ0, IRQ1, IRQ2, IRQ3 } }, + { 0xfffe081a, 0, 16, 4, /* IPR02 */ { IRQ4, IRQ5, IRQ6, IRQ7 } }, + { 0xfffe0820, 0, 16, 4, /* IPR05 */ { PINT, 0, 0, 0 } }, + { 0xfffe0c00, 0, 16, 4, /* IPR06 */ { DMAC0, DMAC1, DMAC2, DMAC3 } }, + { 0xfffe0c02, 0, 16, 4, /* IPR07 */ { DMAC4, DMAC5, DMAC6, DMAC7 } }, + { 0xfffe0c04, 0, 16, 4, /* IPR08 */ { USB, LCDC, CMT0, CMT1 } }, + { 0xfffe0c06, 0, 16, 4, /* IPR09 */ { BSC, WDT, MTU0_ABCD, MTU0_VEF } }, + { 0xfffe0c08, 0, 16, 4, /* IPR10 */ { MTU1_AB, MTU1_VU, MTU2_AB, + MTU2_VU } }, + { 0xfffe0c0a, 0, 16, 4, /* IPR11 */ { MTU3_ABCD, MTU2_TCI3V, MTU4_ABCD, + MTU2_TCI4V } }, + { 0xfffe0c0c, 0, 16, 4, /* IPR12 */ { ADC_ADI, IIC30, IIC31, IIC32 } }, + { 0xfffe0c0e, 0, 16, 4, /* IPR13 */ { IIC33, SCIF0, SCIF1, SCIF2 } }, + { 0xfffe0c10, 0, 16, 4, /* IPR14 */ { SCIF3, SSU0, SSU1, SSI0_SSII } }, +#ifdef CONFIG_CPU_SUBTYPE_SH7203 + { 0xfffe0c12, 0, 16, 4, /* IPR15 */ { SSI1_SSII, SSI2_SSII, + SSI3_SSII, 0 } }, + { 0xfffe0c14, 0, 16, 4, /* IPR16 */ { FLCTL, 0, RTC, RCAN0 } }, + { 0xfffe0c16, 0, 16, 4, /* IPR17 */ { RCAN1, 0, 0, 0 } }, +#else + { 0xfffe0c12, 0, 16, 4, /* IPR15 */ { SSI1_SSII, SSI2_SSII, + SSI3_SSII, ROMDEC } }, + { 0xfffe0c14, 0, 16, 4, /* IPR16 */ { FLCTL, SDHI, RTC, RCAN0 } }, + { 0xfffe0c16, 0, 16, 4, /* IPR17 */ { RCAN1, SRC, IEBI, 0 } }, +#endif +}; + +static struct intc_mask_reg mask_registers[] __initdata = { + { 0xfffe0808, 0, 16, /* PINTER */ + { 0, 0, 0, 0, 0, 0, 0, 0, + PINT7, PINT6, PINT5, PINT4, PINT3, PINT2, PINT1, PINT0 } }, +}; + +static DECLARE_INTC_DESC(intc_desc, "sh7203", vectors, groups, + mask_registers, prio_registers, NULL); + +static struct plat_sci_port sci_platform_data[] = { + { + .mapbase = 0xfffe8000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 193, 194, 195, 192 }, + }, { + .mapbase = 0xfffe8800, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 197, 198, 199, 196 }, + }, { + .mapbase = 0xfffe9000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 201, 202, 203, 200 }, + }, { + .mapbase = 0xfffe9800, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 205, 206, 207, 204 }, + }, { + .flags = 0, + } +}; + +static struct platform_device sci_device = { + .name = "sh-sci", + .id = -1, + .dev = { + .platform_data = sci_platform_data, + }, +}; + +static struct resource rtc_resources[] = { + [0] = { + .start = 0xffff2000, + .end = 0xffff2000 + 0x58 - 1, + .flags = IORESOURCE_IO, + }, + [1] = { + /* Period IRQ */ + .start = 232, + .flags = IORESOURCE_IRQ, + }, + [2] = { + /* Carry IRQ */ + .start = 233, + .flags = IORESOURCE_IRQ, + }, + [3] = { + /* Alarm IRQ */ + .start = 231, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device rtc_device = { + .name = "sh-rtc", + .id = -1, + .num_resources = ARRAY_SIZE(rtc_resources), + .resource = rtc_resources, +}; + +static struct platform_device *sh7203_devices[] __initdata = { + &sci_device, + &rtc_device, +}; + +static int __init sh7203_devices_setup(void) +{ + return platform_add_devices(sh7203_devices, + ARRAY_SIZE(sh7203_devices)); +} +__initcall(sh7203_devices_setup); + +void __init plat_irq_setup(void) +{ + register_intc_controller(&intc_desc); +} diff --git a/arch/sh/kernel/cpu/sh2a/setup-sh7206.c b/arch/sh/kernel/cpu/sh2a/setup-sh7206.c index bd745aa87222..a564425b905f 100644 --- a/arch/sh/kernel/cpu/sh2a/setup-sh7206.c +++ b/arch/sh/kernel/cpu/sh2a/setup-sh7206.c @@ -167,7 +167,7 @@ static struct intc_mask_reg mask_registers[] __initdata = { }; static DECLARE_INTC_DESC(intc_desc, "sh7206", vectors, groups, - NULL, mask_registers, prio_registers, NULL); + mask_registers, prio_registers, NULL); static struct plat_sci_port sci_platform_data[] = { { diff --git a/arch/sh/kernel/cpu/sh3/Makefile b/arch/sh/kernel/cpu/sh3/Makefile index 646eb6933614..3ae4d9111f19 100644 --- a/arch/sh/kernel/cpu/sh3/Makefile +++ b/arch/sh/kernel/cpu/sh3/Makefile @@ -13,6 +13,7 @@ obj-$(CONFIG_CPU_SUBTYPE_SH7709) += setup-sh770x.o obj-$(CONFIG_CPU_SUBTYPE_SH7710) += setup-sh7710.o obj-$(CONFIG_CPU_SUBTYPE_SH7712) += setup-sh7710.o obj-$(CONFIG_CPU_SUBTYPE_SH7720) += setup-sh7720.o +obj-$(CONFIG_CPU_SUBTYPE_SH7721) += setup-sh7720.o # Primary on-chip clocks (common) clock-$(CONFIG_CPU_SH3) := clock-sh3.o @@ -21,5 +22,6 @@ clock-$(CONFIG_CPU_SUBTYPE_SH7706) := clock-sh7706.o clock-$(CONFIG_CPU_SUBTYPE_SH7709) := clock-sh7709.o clock-$(CONFIG_CPU_SUBTYPE_SH7710) := clock-sh7710.o clock-$(CONFIG_CPU_SUBTYPE_SH7720) := clock-sh7710.o +clock-$(CONFIG_CPU_SUBTYPE_SH7712) := clock-sh7712.o obj-y += $(clock-y) diff --git a/arch/sh/kernel/cpu/sh3/clock-sh7712.c b/arch/sh/kernel/cpu/sh3/clock-sh7712.c new file mode 100644 index 000000000000..54f54df51ef0 --- /dev/null +++ b/arch/sh/kernel/cpu/sh3/clock-sh7712.c @@ -0,0 +1,71 @@ +/* + * arch/sh/kernel/cpu/sh3/clock-sh7712.c + * + * SH7712 support for the clock framework + * + * Copyright (C) 2007 Andrew Murray <amurray@mpc-data.co.uk> + * + * Based on arch/sh/kernel/cpu/sh3/clock-sh3.c + * Copyright (C) 2005 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/init.h> +#include <linux/kernel.h> +#include <asm/clock.h> +#include <asm/freq.h> +#include <asm/io.h> + +static int multipliers[] = { 1, 2, 3 }; +static int divisors[] = { 1, 2, 3, 4, 6 }; + +static void master_clk_init(struct clk *clk) +{ + int frqcr = ctrl_inw(FRQCR); + int idx = (frqcr & 0x0300) >> 8; + + clk->rate *= multipliers[idx]; +} + +static struct clk_ops sh7712_master_clk_ops = { + .init = master_clk_init, +}; + +static void module_clk_recalc(struct clk *clk) +{ + int frqcr = ctrl_inw(FRQCR); + int idx = frqcr & 0x0007; + + clk->rate = clk->parent->rate / divisors[idx]; +} + +static struct clk_ops sh7712_module_clk_ops = { + .recalc = module_clk_recalc, +}; + +static void cpu_clk_recalc(struct clk *clk) +{ + int frqcr = ctrl_inw(FRQCR); + int idx = (frqcr & 0x0030) >> 4; + + clk->rate = clk->parent->rate / divisors[idx]; +} + +static struct clk_ops sh7712_cpu_clk_ops = { + .recalc = cpu_clk_recalc, +}; + +static struct clk_ops *sh7712_clk_ops[] = { + &sh7712_master_clk_ops, + &sh7712_module_clk_ops, + &sh7712_cpu_clk_ops, +}; + +void __init arch_init_clk_ops(struct clk_ops **ops, int idx) +{ + if (idx < ARRAY_SIZE(sh7712_clk_ops)) + *ops = sh7712_clk_ops[idx]; +} + diff --git a/arch/sh/kernel/cpu/sh3/entry.S b/arch/sh/kernel/cpu/sh3/entry.S index 0d12a124055c..4004073f98cd 100644 --- a/arch/sh/kernel/cpu/sh3/entry.S +++ b/arch/sh/kernel/cpu/sh3/entry.S @@ -13,8 +13,9 @@ #include <linux/linkage.h> #include <asm/asm-offsets.h> #include <asm/thread_info.h> -#include <asm/cpu/mmu_context.h> #include <asm/unistd.h> +#include <asm/cpu/mmu_context.h> +#include <asm/page.h> ! NOTE: ! GNU as (as of 2.9.1) changes bf/s into bt/s and bra, when the address @@ -409,6 +410,27 @@ ENTRY(handle_exception) ! Using k0, k1 for scratch registers (r0_bank1, r1_bank), ! save all registers onto stack. ! + +#ifdef CONFIG_GUSA + ! Check for roll back gRB (User and Kernel) + mov r15, k0 + shll k0 + bf/s 1f + shll k0 + bf/s 1f + stc spc, k1 + stc r0_bank, k0 + cmp/hs k0, k1 ! test k1 (saved PC) >= k0 (saved r0) + bt/s 2f + stc r1_bank, k1 + + add #-2, k0 + add r15, k0 + ldc k0, spc ! PC = saved r0 + r15 - 2 +2: mov k1, r15 ! SP = r1 +1: +#endif + stc ssr, k0 ! Is it from kernel space? shll k0 ! Check MD bit (bit30) by shifting it into... shll k0 ! ...the T bit diff --git a/arch/sh/kernel/cpu/sh3/ex.S b/arch/sh/kernel/cpu/sh3/ex.S index b6abf38d3a8d..11b6d9c6edae 100644 --- a/arch/sh/kernel/cpu/sh3/ex.S +++ b/arch/sh/kernel/cpu/sh3/ex.S @@ -36,7 +36,7 @@ ENTRY(exception_handling_table) .long exception_error ! address error store /* 100 */ #endif #if defined(CONFIG_SH_FPU) - .long do_fpu_error /* 120 */ + .long fpu_error_trap_handler /* 120 */ #else .long exception_error /* 120 */ #endif diff --git a/arch/sh/kernel/cpu/sh3/probe.c b/arch/sh/kernel/cpu/sh3/probe.c index bf579e061e09..fcc80bb7bee7 100644 --- a/arch/sh/kernel/cpu/sh3/probe.c +++ b/arch/sh/kernel/cpu/sh3/probe.c @@ -16,11 +16,11 @@ #include <asm/cache.h> #include <asm/io.h> -int __init detect_cpu_and_cache_system(void) +int __uses_jump_to_uncached detect_cpu_and_cache_system(void) { unsigned long addr0, addr1, data0, data1, data2, data3; - jump_to_P2(); + jump_to_uncached(); /* * Check if the entry shadows or not. * When shadowed, it's 128-entry system. @@ -48,7 +48,7 @@ int __init detect_cpu_and_cache_system(void) ctrl_outl(data0&~SH_CACHE_VALID, addr0); ctrl_outl(data2&~SH_CACHE_VALID, addr1); - back_to_P1(); + back_to_cached(); boot_cpu_data.dcache.ways = 4; boot_cpu_data.dcache.entry_shift = 4; @@ -84,6 +84,9 @@ int __init detect_cpu_and_cache_system(void) #if defined(CONFIG_CPU_SUBTYPE_SH7720) boot_cpu_data.type = CPU_SH7720; #endif +#if defined(CONFIG_CPU_SUBTYPE_SH7721) + boot_cpu_data.type = CPU_SH7721; +#endif #if defined(CONFIG_CPU_SUBTYPE_SH7705) boot_cpu_data.type = CPU_SH7705; diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7705.c b/arch/sh/kernel/cpu/sh3/setup-sh7705.c index f6c65f2659e9..dd0a20a685f7 100644 --- a/arch/sh/kernel/cpu/sh3/setup-sh7705.c +++ b/arch/sh/kernel/cpu/sh3/setup-sh7705.c @@ -66,12 +66,6 @@ static struct intc_group groups[] __initdata = { INTC_GROUP(SCIF2, SCIF2_ERI, SCIF2_RXI, SCIF2_TXI), }; -static struct intc_prio priorities[] __initdata = { - INTC_PRIO(DMAC, 7), - INTC_PRIO(SCIF2, 3), - INTC_PRIO(SCIF0, 3), -}; - static struct intc_prio_reg prio_registers[] __initdata = { { 0xfffffee2, 0, 16, 4, /* IPRA */ { TMU0, TMU1, TMU2, RTC } }, { 0xfffffee4, 0, 16, 4, /* IPRB */ { WDT, REF_RCMI, 0, 0 } }, @@ -85,7 +79,7 @@ static struct intc_prio_reg prio_registers[] __initdata = { }; static DECLARE_INTC_DESC(intc_desc, "sh7705", vectors, groups, - priorities, NULL, prio_registers, NULL); + NULL, prio_registers, NULL); static struct intc_vect vectors_irq[] __initdata = { INTC_VECT(IRQ0, 0x600), INTC_VECT(IRQ1, 0x620), @@ -93,7 +87,7 @@ static struct intc_vect vectors_irq[] __initdata = { }; static DECLARE_INTC_DESC(intc_desc_irq, "sh7705-irq", vectors_irq, NULL, - priorities, NULL, prio_registers, NULL); + NULL, prio_registers, NULL); static struct plat_sci_port sci_platform_data[] = { { diff --git a/arch/sh/kernel/cpu/sh3/setup-sh770x.c b/arch/sh/kernel/cpu/sh3/setup-sh770x.c index 60b04b1f9453..969804bb523b 100644 --- a/arch/sh/kernel/cpu/sh3/setup-sh770x.c +++ b/arch/sh/kernel/cpu/sh3/setup-sh770x.c @@ -81,13 +81,6 @@ static struct intc_group groups[] __initdata = { INTC_GROUP(SCIF2, SCIF2_ERI, SCIF2_RXI, SCIF2_BRI, SCIF2_TXI), }; -static struct intc_prio priorities[] __initdata = { - INTC_PRIO(DMAC, 7), - INTC_PRIO(SCI, 3), - INTC_PRIO(SCIF2, 3), - INTC_PRIO(SCIF0, 3), -}; - static struct intc_prio_reg prio_registers[] __initdata = { { 0xfffffee2, 0, 16, 4, /* IPRA */ { TMU0, TMU1, TMU2, RTC } }, { 0xfffffee4, 0, 16, 4, /* IPRB */ { WDT, REF, SCI, 0 } }, @@ -109,7 +102,7 @@ static struct intc_prio_reg prio_registers[] __initdata = { }; static DECLARE_INTC_DESC(intc_desc, "sh770x", vectors, groups, - priorities, NULL, prio_registers, NULL); + NULL, prio_registers, NULL); #if defined(CONFIG_CPU_SUBTYPE_SH7706) || \ defined(CONFIG_CPU_SUBTYPE_SH7707) || \ @@ -120,7 +113,7 @@ static struct intc_vect vectors_irq[] __initdata = { }; static DECLARE_INTC_DESC(intc_desc_irq, "sh770x-irq", vectors_irq, NULL, - priorities, NULL, prio_registers, NULL); + NULL, prio_registers, NULL); #endif static struct resource rtc_resources[] = { diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7710.c b/arch/sh/kernel/cpu/sh3/setup-sh7710.c index 84e5629fa841..0cc0e2bf135d 100644 --- a/arch/sh/kernel/cpu/sh3/setup-sh7710.c +++ b/arch/sh/kernel/cpu/sh3/setup-sh7710.c @@ -73,18 +73,6 @@ static struct intc_group groups[] __initdata = { INTC_GROUP(SIOF1, SIOF1_ERI, SIOF1_TXI, SIOF1_RXI, SIOF1_CCI), }; -static struct intc_prio priorities[] __initdata = { - INTC_PRIO(DMAC1, 7), - INTC_PRIO(DMAC2, 7), - INTC_PRIO(SCIF0, 3), - INTC_PRIO(SCIF1, 3), - INTC_PRIO(SIOF0, 3), - INTC_PRIO(SIOF1, 3), - INTC_PRIO(EDMAC0, 5), - INTC_PRIO(EDMAC1, 5), - INTC_PRIO(EDMAC2, 5), -}; - static struct intc_prio_reg prio_registers[] __initdata = { { 0xfffffee2, 0, 16, 4, /* IPRA */ { TMU0, TMU1, TMU2, RTC } }, { 0xfffffee4, 0, 16, 4, /* IPRB */ { WDT, REF, 0, 0 } }, @@ -101,7 +89,7 @@ static struct intc_prio_reg prio_registers[] __initdata = { }; static DECLARE_INTC_DESC(intc_desc, "sh7710", vectors, groups, - priorities, NULL, prio_registers, NULL); + NULL, prio_registers, NULL); static struct intc_vect vectors_irq[] __initdata = { INTC_VECT(IRQ0, 0x600), INTC_VECT(IRQ1, 0x620), @@ -109,7 +97,7 @@ static struct intc_vect vectors_irq[] __initdata = { }; static DECLARE_INTC_DESC(intc_desc_irq, "sh7710-irq", vectors_irq, NULL, - priorities, NULL, prio_registers, NULL); + NULL, prio_registers, NULL); static struct resource rtc_resources[] = { [0] = { diff --git a/arch/sh/kernel/cpu/sh3/setup-sh7720.c b/arch/sh/kernel/cpu/sh3/setup-sh7720.c index a0929b8a95ae..3855ea4c21c8 100644 --- a/arch/sh/kernel/cpu/sh3/setup-sh7720.c +++ b/arch/sh/kernel/cpu/sh3/setup-sh7720.c @@ -85,9 +85,62 @@ static struct platform_device sci_device = { }, }; +static struct resource usb_ohci_resources[] = { + [0] = { + .start = 0xA4428000, + .end = 0xA44280FF, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 67, + .end = 67, + .flags = IORESOURCE_IRQ, + }, +}; + +static u64 usb_ohci_dma_mask = 0xffffffffUL; +static struct platform_device usb_ohci_device = { + .name = "sh_ohci", + .id = -1, + .dev = { + .dma_mask = &usb_ohci_dma_mask, + .coherent_dma_mask = 0xffffffff, + }, + .num_resources = ARRAY_SIZE(usb_ohci_resources), + .resource = usb_ohci_resources, +}; + +static struct resource usbf_resources[] = { + [0] = { + .name = "sh_udc", + .start = 0xA4420000, + .end = 0xA44200FF, + .flags = IORESOURCE_MEM, + }, + [1] = { + .name = "sh_udc", + .start = 65, + .end = 65, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device usbf_device = { + .name = "sh_udc", + .id = -1, + .dev = { + .dma_mask = NULL, + .coherent_dma_mask = 0xffffffff, + }, + .num_resources = ARRAY_SIZE(usbf_resources), + .resource = usbf_resources, +}; + static struct platform_device *sh7720_devices[] __initdata = { &rtc_device, &sci_device, + &usb_ohci_device, + &usbf_device, }; static int __init sh7720_devices_setup(void) @@ -127,8 +180,11 @@ static struct intc_vect vectors[] __initdata = { INTC_VECT(USBF_SPD, 0x6e0), INTC_VECT(DMAC1_DEI0, 0x800), INTC_VECT(DMAC1_DEI1, 0x820), INTC_VECT(DMAC1_DEI2, 0x840), INTC_VECT(DMAC1_DEI3, 0x860), INTC_VECT(LCDC, 0x900), - INTC_VECT(SSL, 0x980), INTC_VECT(USBFI0, 0xa20), - INTC_VECT(USBFI1, 0xa40), INTC_VECT(USBHI, 0xa60), +#if defined(CONFIG_CPU_SUBTYPE_SH7720) + INTC_VECT(SSL, 0x980), +#endif + INTC_VECT(USBFI0, 0xa20), INTC_VECT(USBFI1, 0xa40), + INTC_VECT(USBHI, 0xa60), INTC_VECT(DMAC2_DEI4, 0xb80), INTC_VECT(DMAC2_DEI5, 0xba0), INTC_VECT(ADC, 0xbe0), INTC_VECT(SCIF0, 0xc00), INTC_VECT(SCIF1, 0xc20), INTC_VECT(PINT07, 0xc80), @@ -153,22 +209,16 @@ static struct intc_group groups[] __initdata = { INTC_GROUP(MMC, MMCI0, MMCI1, MMCI2, MMCI3), }; -static struct intc_prio priorities[] __initdata = { - INTC_PRIO(SCIF0, 2), - INTC_PRIO(SCIF1, 2), - INTC_PRIO(DMAC1, 1), - INTC_PRIO(DMAC2, 1), - INTC_PRIO(RTC, 2), - INTC_PRIO(TMU, 2), - INTC_PRIO(TPU, 2), -}; - static struct intc_prio_reg prio_registers[] __initdata = { { 0xA414FEE2UL, 0, 16, 4, /* IPRA */ { TMU0, TMU1, TMU2, RTC } }, { 0xA414FEE4UL, 0, 16, 4, /* IPRB */ { WDT, REF_RCMI, SIM, 0 } }, { 0xA4140016UL, 0, 16, 4, /* IPRC */ { IRQ3, IRQ2, IRQ1, IRQ0 } }, { 0xA4140018UL, 0, 16, 4, /* IPRD */ { USBF_SPD, TMU_SUNI, IRQ5, IRQ4 } }, +#if defined(CONFIG_CPU_SUBTYPE_SH7720) { 0xA414001AUL, 0, 16, 4, /* IPRE */ { DMAC1, 0, LCDC, SSL } }, +#else + { 0xA414001AUL, 0, 16, 4, /* IPRE */ { DMAC1, 0, LCDC, 0 } }, +#endif { 0xA4080000UL, 0, 16, 4, /* IPRF */ { ADC, DMAC2, USBFI, CMT } }, { 0xA4080002UL, 0, 16, 4, /* IPRG */ { SCIF0, SCIF1, 0, 0 } }, { 0xA4080004UL, 0, 16, 4, /* IPRH */ { PINT07, PINT815, TPU, IIC } }, @@ -177,7 +227,7 @@ static struct intc_prio_reg prio_registers[] __initdata = { }; static DECLARE_INTC_DESC(intc_desc, "sh7720", vectors, groups, - priorities, NULL, prio_registers, NULL); + NULL, prio_registers, NULL); static struct intc_sense_reg sense_registers[] __initdata = { { INTC_ICR1, 16, 2, { 0, 0, IRQ5, IRQ4, IRQ3, IRQ2, IRQ1, IRQ0 } }, @@ -190,7 +240,7 @@ static struct intc_vect vectors_irq[] __initdata = { }; static DECLARE_INTC_DESC(intc_irq_desc, "sh7720-irq", vectors_irq, - NULL, priorities, NULL, prio_registers, sense_registers); + NULL, NULL, prio_registers, sense_registers); void __init plat_irq_setup_pins(int mode) { diff --git a/arch/sh/kernel/cpu/sh4/Makefile b/arch/sh/kernel/cpu/sh4/Makefile index dadd6bffc128..d608557c7a3f 100644 --- a/arch/sh/kernel/cpu/sh4/Makefile +++ b/arch/sh/kernel/cpu/sh4/Makefile @@ -5,7 +5,7 @@ obj-y := probe.o common.o common-y += $(addprefix ../sh3/, entry.o ex.o) -obj-$(CONFIG_SH_FPU) += fpu.o +obj-$(CONFIG_SH_FPU) += fpu.o softfloat.o obj-$(CONFIG_SH_STORE_QUEUES) += sq.o # CPU subtype setup diff --git a/arch/sh/kernel/cpu/sh4/fpu.c b/arch/sh/kernel/cpu/sh4/fpu.c index c5a4fc77fa06..817f9939cda6 100644 --- a/arch/sh/kernel/cpu/sh4/fpu.c +++ b/arch/sh/kernel/cpu/sh4/fpu.c @@ -1,7 +1,4 @@ -/* $Id: fpu.c,v 1.4 2004/01/13 05:52:11 kkojima Exp $ - * - * linux/arch/sh/kernel/fpu.c - * +/* * Save/restore floating point context for signal handlers. * * This file is subject to the terms and conditions of the GNU General Public @@ -9,15 +6,16 @@ * for more details. * * Copyright (C) 1999, 2000 Kaz Kojima & Niibe Yutaka + * Copyright (C) 2006 ST Microelectronics Ltd. (denorm support) * - * FIXME! These routines can be optimized in big endian case. + * FIXME! These routines have not been tested for big endian case. */ - #include <linux/sched.h> #include <linux/signal.h> +#include <linux/io.h> +#include <asm/cpu/fpu.h> #include <asm/processor.h> #include <asm/system.h> -#include <asm/io.h> /* The PR (precision) bit in the FP Status Register must be clear when * an frchg instruction is executed, otherwise the instruction is undefined. @@ -25,177 +23,184 @@ */ #define FPSCR_RCHG 0x00000000 +extern unsigned long long float64_div(unsigned long long a, + unsigned long long b); +extern unsigned long int float32_div(unsigned long int a, unsigned long int b); +extern unsigned long long float64_mul(unsigned long long a, + unsigned long long b); +extern unsigned long int float32_mul(unsigned long int a, unsigned long int b); +extern unsigned long long float64_add(unsigned long long a, + unsigned long long b); +extern unsigned long int float32_add(unsigned long int a, unsigned long int b); +extern unsigned long long float64_sub(unsigned long long a, + unsigned long long b); +extern unsigned long int float32_sub(unsigned long int a, unsigned long int b); +static unsigned int fpu_exception_flags; /* * Save FPU registers onto task structure. * Assume called with FPU enabled (SR.FD=0). */ -void -save_fpu(struct task_struct *tsk, struct pt_regs *regs) +void save_fpu(struct task_struct *tsk, struct pt_regs *regs) { unsigned long dummy; clear_tsk_thread_flag(tsk, TIF_USEDFPU); enable_fpu(); - asm volatile("sts.l fpul, @-%0\n\t" - "sts.l fpscr, @-%0\n\t" - "lds %2, fpscr\n\t" - "frchg\n\t" - "fmov.s fr15, @-%0\n\t" - "fmov.s fr14, @-%0\n\t" - "fmov.s fr13, @-%0\n\t" - "fmov.s fr12, @-%0\n\t" - "fmov.s fr11, @-%0\n\t" - "fmov.s fr10, @-%0\n\t" - "fmov.s fr9, @-%0\n\t" - "fmov.s fr8, @-%0\n\t" - "fmov.s fr7, @-%0\n\t" - "fmov.s fr6, @-%0\n\t" - "fmov.s fr5, @-%0\n\t" - "fmov.s fr4, @-%0\n\t" - "fmov.s fr3, @-%0\n\t" - "fmov.s fr2, @-%0\n\t" - "fmov.s fr1, @-%0\n\t" - "fmov.s fr0, @-%0\n\t" - "frchg\n\t" - "fmov.s fr15, @-%0\n\t" - "fmov.s fr14, @-%0\n\t" - "fmov.s fr13, @-%0\n\t" - "fmov.s fr12, @-%0\n\t" - "fmov.s fr11, @-%0\n\t" - "fmov.s fr10, @-%0\n\t" - "fmov.s fr9, @-%0\n\t" - "fmov.s fr8, @-%0\n\t" - "fmov.s fr7, @-%0\n\t" - "fmov.s fr6, @-%0\n\t" - "fmov.s fr5, @-%0\n\t" - "fmov.s fr4, @-%0\n\t" - "fmov.s fr3, @-%0\n\t" - "fmov.s fr2, @-%0\n\t" - "fmov.s fr1, @-%0\n\t" - "fmov.s fr0, @-%0\n\t" - "lds %3, fpscr\n\t" - : "=r" (dummy) - : "0" ((char *)(&tsk->thread.fpu.hard.status)), - "r" (FPSCR_RCHG), - "r" (FPSCR_INIT) - : "memory"); - - disable_fpu(); - release_fpu(regs); + asm volatile ("sts.l fpul, @-%0\n\t" + "sts.l fpscr, @-%0\n\t" + "lds %2, fpscr\n\t" + "frchg\n\t" + "fmov.s fr15, @-%0\n\t" + "fmov.s fr14, @-%0\n\t" + "fmov.s fr13, @-%0\n\t" + "fmov.s fr12, @-%0\n\t" + "fmov.s fr11, @-%0\n\t" + "fmov.s fr10, @-%0\n\t" + "fmov.s fr9, @-%0\n\t" + "fmov.s fr8, @-%0\n\t" + "fmov.s fr7, @-%0\n\t" + "fmov.s fr6, @-%0\n\t" + "fmov.s fr5, @-%0\n\t" + "fmov.s fr4, @-%0\n\t" + "fmov.s fr3, @-%0\n\t" + "fmov.s fr2, @-%0\n\t" + "fmov.s fr1, @-%0\n\t" + "fmov.s fr0, @-%0\n\t" + "frchg\n\t" + "fmov.s fr15, @-%0\n\t" + "fmov.s fr14, @-%0\n\t" + "fmov.s fr13, @-%0\n\t" + "fmov.s fr12, @-%0\n\t" + "fmov.s fr11, @-%0\n\t" + "fmov.s fr10, @-%0\n\t" + "fmov.s fr9, @-%0\n\t" + "fmov.s fr8, @-%0\n\t" + "fmov.s fr7, @-%0\n\t" + "fmov.s fr6, @-%0\n\t" + "fmov.s fr5, @-%0\n\t" + "fmov.s fr4, @-%0\n\t" + "fmov.s fr3, @-%0\n\t" + "fmov.s fr2, @-%0\n\t" + "fmov.s fr1, @-%0\n\t" + "fmov.s fr0, @-%0\n\t" + "lds %3, fpscr\n\t":"=r" (dummy) + :"0"((char *)(&tsk->thread.fpu.hard.status)), + "r"(FPSCR_RCHG), "r"(FPSCR_INIT) + :"memory"); + + disable_fpu(); + release_fpu(regs); } -static void -restore_fpu(struct task_struct *tsk) +static void restore_fpu(struct task_struct *tsk) { unsigned long dummy; - enable_fpu(); - asm volatile("lds %2, fpscr\n\t" - "fmov.s @%0+, fr0\n\t" - "fmov.s @%0+, fr1\n\t" - "fmov.s @%0+, fr2\n\t" - "fmov.s @%0+, fr3\n\t" - "fmov.s @%0+, fr4\n\t" - "fmov.s @%0+, fr5\n\t" - "fmov.s @%0+, fr6\n\t" - "fmov.s @%0+, fr7\n\t" - "fmov.s @%0+, fr8\n\t" - "fmov.s @%0+, fr9\n\t" - "fmov.s @%0+, fr10\n\t" - "fmov.s @%0+, fr11\n\t" - "fmov.s @%0+, fr12\n\t" - "fmov.s @%0+, fr13\n\t" - "fmov.s @%0+, fr14\n\t" - "fmov.s @%0+, fr15\n\t" - "frchg\n\t" - "fmov.s @%0+, fr0\n\t" - "fmov.s @%0+, fr1\n\t" - "fmov.s @%0+, fr2\n\t" - "fmov.s @%0+, fr3\n\t" - "fmov.s @%0+, fr4\n\t" - "fmov.s @%0+, fr5\n\t" - "fmov.s @%0+, fr6\n\t" - "fmov.s @%0+, fr7\n\t" - "fmov.s @%0+, fr8\n\t" - "fmov.s @%0+, fr9\n\t" - "fmov.s @%0+, fr10\n\t" - "fmov.s @%0+, fr11\n\t" - "fmov.s @%0+, fr12\n\t" - "fmov.s @%0+, fr13\n\t" - "fmov.s @%0+, fr14\n\t" - "fmov.s @%0+, fr15\n\t" - "frchg\n\t" - "lds.l @%0+, fpscr\n\t" - "lds.l @%0+, fpul\n\t" - : "=r" (dummy) - : "0" (&tsk->thread.fpu), "r" (FPSCR_RCHG) - : "memory"); + enable_fpu(); + asm volatile ("lds %2, fpscr\n\t" + "fmov.s @%0+, fr0\n\t" + "fmov.s @%0+, fr1\n\t" + "fmov.s @%0+, fr2\n\t" + "fmov.s @%0+, fr3\n\t" + "fmov.s @%0+, fr4\n\t" + "fmov.s @%0+, fr5\n\t" + "fmov.s @%0+, fr6\n\t" + "fmov.s @%0+, fr7\n\t" + "fmov.s @%0+, fr8\n\t" + "fmov.s @%0+, fr9\n\t" + "fmov.s @%0+, fr10\n\t" + "fmov.s @%0+, fr11\n\t" + "fmov.s @%0+, fr12\n\t" + "fmov.s @%0+, fr13\n\t" + "fmov.s @%0+, fr14\n\t" + "fmov.s @%0+, fr15\n\t" + "frchg\n\t" + "fmov.s @%0+, fr0\n\t" + "fmov.s @%0+, fr1\n\t" + "fmov.s @%0+, fr2\n\t" + "fmov.s @%0+, fr3\n\t" + "fmov.s @%0+, fr4\n\t" + "fmov.s @%0+, fr5\n\t" + "fmov.s @%0+, fr6\n\t" + "fmov.s @%0+, fr7\n\t" + "fmov.s @%0+, fr8\n\t" + "fmov.s @%0+, fr9\n\t" + "fmov.s @%0+, fr10\n\t" + "fmov.s @%0+, fr11\n\t" + "fmov.s @%0+, fr12\n\t" + "fmov.s @%0+, fr13\n\t" + "fmov.s @%0+, fr14\n\t" + "fmov.s @%0+, fr15\n\t" + "frchg\n\t" + "lds.l @%0+, fpscr\n\t" + "lds.l @%0+, fpul\n\t" + :"=r" (dummy) + :"0"(&tsk->thread.fpu), "r"(FPSCR_RCHG) + :"memory"); disable_fpu(); } /* * Load the FPU with signalling NANS. This bit pattern we're using * has the property that no matter wether considered as single or as - * double precision represents signaling NANS. + * double precision represents signaling NANS. */ -static void -fpu_init(void) +static void fpu_init(void) { enable_fpu(); - asm volatile("lds %0, fpul\n\t" - "lds %1, fpscr\n\t" - "fsts fpul, fr0\n\t" - "fsts fpul, fr1\n\t" - "fsts fpul, fr2\n\t" - "fsts fpul, fr3\n\t" - "fsts fpul, fr4\n\t" - "fsts fpul, fr5\n\t" - "fsts fpul, fr6\n\t" - "fsts fpul, fr7\n\t" - "fsts fpul, fr8\n\t" - "fsts fpul, fr9\n\t" - "fsts fpul, fr10\n\t" - "fsts fpul, fr11\n\t" - "fsts fpul, fr12\n\t" - "fsts fpul, fr13\n\t" - "fsts fpul, fr14\n\t" - "fsts fpul, fr15\n\t" - "frchg\n\t" - "fsts fpul, fr0\n\t" - "fsts fpul, fr1\n\t" - "fsts fpul, fr2\n\t" - "fsts fpul, fr3\n\t" - "fsts fpul, fr4\n\t" - "fsts fpul, fr5\n\t" - "fsts fpul, fr6\n\t" - "fsts fpul, fr7\n\t" - "fsts fpul, fr8\n\t" - "fsts fpul, fr9\n\t" - "fsts fpul, fr10\n\t" - "fsts fpul, fr11\n\t" - "fsts fpul, fr12\n\t" - "fsts fpul, fr13\n\t" - "fsts fpul, fr14\n\t" - "fsts fpul, fr15\n\t" - "frchg\n\t" - "lds %2, fpscr\n\t" - : /* no output */ - : "r" (0), "r" (FPSCR_RCHG), "r" (FPSCR_INIT)); - disable_fpu(); + asm volatile ( "lds %0, fpul\n\t" + "lds %1, fpscr\n\t" + "fsts fpul, fr0\n\t" + "fsts fpul, fr1\n\t" + "fsts fpul, fr2\n\t" + "fsts fpul, fr3\n\t" + "fsts fpul, fr4\n\t" + "fsts fpul, fr5\n\t" + "fsts fpul, fr6\n\t" + "fsts fpul, fr7\n\t" + "fsts fpul, fr8\n\t" + "fsts fpul, fr9\n\t" + "fsts fpul, fr10\n\t" + "fsts fpul, fr11\n\t" + "fsts fpul, fr12\n\t" + "fsts fpul, fr13\n\t" + "fsts fpul, fr14\n\t" + "fsts fpul, fr15\n\t" + "frchg\n\t" + "fsts fpul, fr0\n\t" + "fsts fpul, fr1\n\t" + "fsts fpul, fr2\n\t" + "fsts fpul, fr3\n\t" + "fsts fpul, fr4\n\t" + "fsts fpul, fr5\n\t" + "fsts fpul, fr6\n\t" + "fsts fpul, fr7\n\t" + "fsts fpul, fr8\n\t" + "fsts fpul, fr9\n\t" + "fsts fpul, fr10\n\t" + "fsts fpul, fr11\n\t" + "fsts fpul, fr12\n\t" + "fsts fpul, fr13\n\t" + "fsts fpul, fr14\n\t" + "fsts fpul, fr15\n\t" + "frchg\n\t" + "lds %2, fpscr\n\t" + : /* no output */ + :"r" (0), "r"(FPSCR_RCHG), "r"(FPSCR_INIT)); + disable_fpu(); } /** - * denormal_to_double - Given denormalized float number, - * store double float + * denormal_to_double - Given denormalized float number, + * store double float * - * @fpu: Pointer to sh_fpu_hard structure - * @n: Index to FP register + * @fpu: Pointer to sh_fpu_hard structure + * @n: Index to FP register */ -static void -denormal_to_double (struct sh_fpu_hard_struct *fpu, int n) +static void denormal_to_double(struct sh_fpu_hard_struct *fpu, int n) { unsigned long du, dl; unsigned long x = fpu->fpul; @@ -212,7 +217,7 @@ denormal_to_double (struct sh_fpu_hard_struct *fpu, int n) dl = x << 29; fpu->fp_regs[n] = du; - fpu->fp_regs[n+1] = dl; + fpu->fp_regs[n + 1] = dl; } } @@ -223,68 +228,191 @@ denormal_to_double (struct sh_fpu_hard_struct *fpu, int n) * * Returns 1 when it's handled (should not cause exception). */ -static int -ieee_fpe_handler (struct pt_regs *regs) +static int ieee_fpe_handler(struct pt_regs *regs) { - unsigned short insn = *(unsigned short *) regs->pc; + unsigned short insn = *(unsigned short *)regs->pc; unsigned short finsn; unsigned long nextpc; int nib[4] = { (insn >> 12) & 0xf, (insn >> 8) & 0xf, (insn >> 4) & 0xf, - insn & 0xf}; - - if (nib[0] == 0xb || - (nib[0] == 0x4 && nib[2] == 0x0 && nib[3] == 0xb)) /* bsr & jsr */ - regs->pr = regs->pc + 4; - - if (nib[0] == 0xa || nib[0] == 0xb) { /* bra & bsr */ - nextpc = regs->pc + 4 + ((short) ((insn & 0xfff) << 4) >> 3); - finsn = *(unsigned short *) (regs->pc + 2); - } else if (nib[0] == 0x8 && nib[1] == 0xd) { /* bt/s */ + insn & 0xf + }; + + if (nib[0] == 0xb || (nib[0] == 0x4 && nib[2] == 0x0 && nib[3] == 0xb)) + regs->pr = regs->pc + 4; /* bsr & jsr */ + + if (nib[0] == 0xa || nib[0] == 0xb) { + /* bra & bsr */ + nextpc = regs->pc + 4 + ((short)((insn & 0xfff) << 4) >> 3); + finsn = *(unsigned short *)(regs->pc + 2); + } else if (nib[0] == 0x8 && nib[1] == 0xd) { + /* bt/s */ if (regs->sr & 1) - nextpc = regs->pc + 4 + ((char) (insn & 0xff) << 1); + nextpc = regs->pc + 4 + ((char)(insn & 0xff) << 1); else nextpc = regs->pc + 4; - finsn = *(unsigned short *) (regs->pc + 2); - } else if (nib[0] == 0x8 && nib[1] == 0xf) { /* bf/s */ + finsn = *(unsigned short *)(regs->pc + 2); + } else if (nib[0] == 0x8 && nib[1] == 0xf) { + /* bf/s */ if (regs->sr & 1) nextpc = regs->pc + 4; else - nextpc = regs->pc + 4 + ((char) (insn & 0xff) << 1); - finsn = *(unsigned short *) (regs->pc + 2); + nextpc = regs->pc + 4 + ((char)(insn & 0xff) << 1); + finsn = *(unsigned short *)(regs->pc + 2); } else if (nib[0] == 0x4 && nib[3] == 0xb && - (nib[2] == 0x0 || nib[2] == 0x2)) { /* jmp & jsr */ + (nib[2] == 0x0 || nib[2] == 0x2)) { + /* jmp & jsr */ nextpc = regs->regs[nib[1]]; - finsn = *(unsigned short *) (regs->pc + 2); + finsn = *(unsigned short *)(regs->pc + 2); } else if (nib[0] == 0x0 && nib[3] == 0x3 && - (nib[2] == 0x0 || nib[2] == 0x2)) { /* braf & bsrf */ + (nib[2] == 0x0 || nib[2] == 0x2)) { + /* braf & bsrf */ nextpc = regs->pc + 4 + regs->regs[nib[1]]; - finsn = *(unsigned short *) (regs->pc + 2); - } else if (insn == 0x000b) { /* rts */ + finsn = *(unsigned short *)(regs->pc + 2); + } else if (insn == 0x000b) { + /* rts */ nextpc = regs->pr; - finsn = *(unsigned short *) (regs->pc + 2); + finsn = *(unsigned short *)(regs->pc + 2); } else { nextpc = regs->pc + instruction_size(insn); finsn = insn; } - if ((finsn & 0xf1ff) == 0xf0ad) { /* fcnvsd */ + if ((finsn & 0xf1ff) == 0xf0ad) { + /* fcnvsd */ struct task_struct *tsk = current; save_fpu(tsk, regs); - if ((tsk->thread.fpu.hard.fpscr & (1 << 17))) { + if ((tsk->thread.fpu.hard.fpscr & FPSCR_CAUSE_ERROR)) /* FPU error */ - denormal_to_double (&tsk->thread.fpu.hard, - (finsn >> 8) & 0xf); - tsk->thread.fpu.hard.fpscr &= - ~(FPSCR_CAUSE_MASK | FPSCR_FLAG_MASK); - grab_fpu(regs); - restore_fpu(tsk); - set_tsk_thread_flag(tsk, TIF_USEDFPU); + denormal_to_double(&tsk->thread.fpu.hard, + (finsn >> 8) & 0xf); + else + return 0; + + regs->pc = nextpc; + return 1; + } else if ((finsn & 0xf00f) == 0xf002) { + /* fmul */ + struct task_struct *tsk = current; + int fpscr; + int n, m, prec; + unsigned int hx, hy; + + n = (finsn >> 8) & 0xf; + m = (finsn >> 4) & 0xf; + hx = tsk->thread.fpu.hard.fp_regs[n]; + hy = tsk->thread.fpu.hard.fp_regs[m]; + fpscr = tsk->thread.fpu.hard.fpscr; + prec = fpscr & FPSCR_DBL_PRECISION; + + if ((fpscr & FPSCR_CAUSE_ERROR) + && (prec && ((hx & 0x7fffffff) < 0x00100000 + || (hy & 0x7fffffff) < 0x00100000))) { + long long llx, lly; + + /* FPU error because of denormal (doubles) */ + llx = ((long long)hx << 32) + | tsk->thread.fpu.hard.fp_regs[n + 1]; + lly = ((long long)hy << 32) + | tsk->thread.fpu.hard.fp_regs[m + 1]; + llx = float64_mul(llx, lly); + tsk->thread.fpu.hard.fp_regs[n] = llx >> 32; + tsk->thread.fpu.hard.fp_regs[n + 1] = llx & 0xffffffff; + } else if ((fpscr & FPSCR_CAUSE_ERROR) + && (!prec && ((hx & 0x7fffffff) < 0x00800000 + || (hy & 0x7fffffff) < 0x00800000))) { + /* FPU error because of denormal (floats) */ + hx = float32_mul(hx, hy); + tsk->thread.fpu.hard.fp_regs[n] = hx; + } else + return 0; + + regs->pc = nextpc; + return 1; + } else if ((finsn & 0xf00e) == 0xf000) { + /* fadd, fsub */ + struct task_struct *tsk = current; + int fpscr; + int n, m, prec; + unsigned int hx, hy; + + n = (finsn >> 8) & 0xf; + m = (finsn >> 4) & 0xf; + hx = tsk->thread.fpu.hard.fp_regs[n]; + hy = tsk->thread.fpu.hard.fp_regs[m]; + fpscr = tsk->thread.fpu.hard.fpscr; + prec = fpscr & FPSCR_DBL_PRECISION; + + if ((fpscr & FPSCR_CAUSE_ERROR) + && (prec && ((hx & 0x7fffffff) < 0x00100000 + || (hy & 0x7fffffff) < 0x00100000))) { + long long llx, lly; + + /* FPU error because of denormal (doubles) */ + llx = ((long long)hx << 32) + | tsk->thread.fpu.hard.fp_regs[n + 1]; + lly = ((long long)hy << 32) + | tsk->thread.fpu.hard.fp_regs[m + 1]; + if ((finsn & 0xf00f) == 0xf000) + llx = float64_add(llx, lly); + else + llx = float64_sub(llx, lly); + tsk->thread.fpu.hard.fp_regs[n] = llx >> 32; + tsk->thread.fpu.hard.fp_regs[n + 1] = llx & 0xffffffff; + } else if ((fpscr & FPSCR_CAUSE_ERROR) + && (!prec && ((hx & 0x7fffffff) < 0x00800000 + || (hy & 0x7fffffff) < 0x00800000))) { + /* FPU error because of denormal (floats) */ + if ((finsn & 0xf00f) == 0xf000) + hx = float32_add(hx, hy); + else + hx = float32_sub(hx, hy); + tsk->thread.fpu.hard.fp_regs[n] = hx; + } else + return 0; + + regs->pc = nextpc; + return 1; + } else if ((finsn & 0xf003) == 0xf003) { + /* fdiv */ + struct task_struct *tsk = current; + int fpscr; + int n, m, prec; + unsigned int hx, hy; + + n = (finsn >> 8) & 0xf; + m = (finsn >> 4) & 0xf; + hx = tsk->thread.fpu.hard.fp_regs[n]; + hy = tsk->thread.fpu.hard.fp_regs[m]; + fpscr = tsk->thread.fpu.hard.fpscr; + prec = fpscr & FPSCR_DBL_PRECISION; + + if ((fpscr & FPSCR_CAUSE_ERROR) + && (prec && ((hx & 0x7fffffff) < 0x00100000 + || (hy & 0x7fffffff) < 0x00100000))) { + long long llx, lly; + + /* FPU error because of denormal (doubles) */ + llx = ((long long)hx << 32) + | tsk->thread.fpu.hard.fp_regs[n + 1]; + lly = ((long long)hy << 32) + | tsk->thread.fpu.hard.fp_regs[m + 1]; + + llx = float64_div(llx, lly); + + tsk->thread.fpu.hard.fp_regs[n] = llx >> 32; + tsk->thread.fpu.hard.fp_regs[n + 1] = llx & 0xffffffff; + } else if ((fpscr & FPSCR_CAUSE_ERROR) + && (!prec && ((hx & 0x7fffffff) < 0x00800000 + || (hy & 0x7fffffff) < 0x00800000))) { + /* FPU error because of denormal (floats) */ + hx = float32_div(hx, hy); + tsk->thread.fpu.hard.fp_regs[n] = hx; } else - force_sig(SIGFPE, tsk); + return 0; regs->pc = nextpc; return 1; @@ -293,27 +421,48 @@ ieee_fpe_handler (struct pt_regs *regs) return 0; } -asmlinkage void -do_fpu_error(unsigned long r4, unsigned long r5, unsigned long r6, - unsigned long r7, struct pt_regs __regs) +void float_raise(unsigned int flags) +{ + fpu_exception_flags |= flags; +} + +int float_rounding_mode(void) { - struct pt_regs *regs = RELOC_HIDE(&__regs, 0); struct task_struct *tsk = current; + int roundingMode = FPSCR_ROUNDING_MODE(tsk->thread.fpu.hard.fpscr); + return roundingMode; +} - if (ieee_fpe_handler(regs)) - return; +BUILD_TRAP_HANDLER(fpu_error) +{ + struct task_struct *tsk = current; + TRAP_HANDLER_DECL; - regs->pc += 2; save_fpu(tsk, regs); + fpu_exception_flags = 0; + if (ieee_fpe_handler(regs)) { + tsk->thread.fpu.hard.fpscr &= + ~(FPSCR_CAUSE_MASK | FPSCR_FLAG_MASK); + tsk->thread.fpu.hard.fpscr |= fpu_exception_flags; + /* Set the FPSCR flag as well as cause bits - simply + * replicate the cause */ + tsk->thread.fpu.hard.fpscr |= (fpu_exception_flags >> 10); + grab_fpu(regs); + restore_fpu(tsk); + set_tsk_thread_flag(tsk, TIF_USEDFPU); + if ((((tsk->thread.fpu.hard.fpscr & FPSCR_ENABLE_MASK) >> 7) & + (fpu_exception_flags >> 2)) == 0) { + return; + } + } + force_sig(SIGFPE, tsk); } -asmlinkage void -do_fpu_state_restore(unsigned long r4, unsigned long r5, unsigned long r6, - unsigned long r7, struct pt_regs __regs) +BUILD_TRAP_HANDLER(fpu_state_restore) { - struct pt_regs *regs = RELOC_HIDE(&__regs, 0); struct task_struct *tsk = current; + TRAP_HANDLER_DECL; grab_fpu(regs); if (!user_mode(regs)) { @@ -324,7 +473,7 @@ do_fpu_state_restore(unsigned long r4, unsigned long r5, unsigned long r6, if (used_math()) { /* Using the FPU again. */ restore_fpu(tsk); - } else { + } else { /* First time FPU user. */ fpu_init(); set_used_math(); diff --git a/arch/sh/kernel/cpu/sh4/probe.c b/arch/sh/kernel/cpu/sh4/probe.c index bc9c28a69bf1..f2b9238cda04 100644 --- a/arch/sh/kernel/cpu/sh4/probe.c +++ b/arch/sh/kernel/cpu/sh4/probe.c @@ -98,6 +98,8 @@ int __init detect_cpu_and_cache_system(void) case 0x200A: if (prr == 0x61) boot_cpu_data.type = CPU_SH7781; + else if (prr == 0xa1) + boot_cpu_data.type = CPU_SH7763; else boot_cpu_data.type = CPU_SH7780; diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7750.c b/arch/sh/kernel/cpu/sh4/setup-sh7750.c index 523f68a9ce0e..ae3603aca615 100644 --- a/arch/sh/kernel/cpu/sh4/setup-sh7750.c +++ b/arch/sh/kernel/cpu/sh4/setup-sh7750.c @@ -126,12 +126,6 @@ static struct intc_group groups[] __initdata = { INTC_GROUP(REF, REF_RCMI, REF_ROVI), }; -static struct intc_prio priorities[] __initdata = { - INTC_PRIO(SCIF, 3), - INTC_PRIO(SCI1, 3), - INTC_PRIO(DMAC, 7), -}; - static struct intc_prio_reg prio_registers[] __initdata = { { 0xffd00004, 0, 16, 4, /* IPRA */ { TMU0, TMU1, TMU2, RTC } }, { 0xffd00008, 0, 16, 4, /* IPRB */ { WDT, REF, SCI1, 0 } }, @@ -143,7 +137,7 @@ static struct intc_prio_reg prio_registers[] __initdata = { }; static DECLARE_INTC_DESC(intc_desc, "sh7750", vectors, groups, - priorities, NULL, prio_registers, NULL); + NULL, prio_registers, NULL); /* SH7750, SH7750S, SH7751 and SH7091 all have 4-channel DMA controllers */ #if defined(CONFIG_CPU_SUBTYPE_SH7750) || \ @@ -163,7 +157,7 @@ static struct intc_group groups_dma4[] __initdata = { static DECLARE_INTC_DESC(intc_desc_dma4, "sh7750_dma4", vectors_dma4, groups_dma4, - priorities, NULL, prio_registers, NULL); + NULL, prio_registers, NULL); #endif /* SH7750R and SH7751R both have 8-channel DMA controllers */ @@ -184,7 +178,7 @@ static struct intc_group groups_dma8[] __initdata = { static DECLARE_INTC_DESC(intc_desc_dma8, "sh7750_dma8", vectors_dma8, groups_dma8, - priorities, NULL, prio_registers, NULL); + NULL, prio_registers, NULL); #endif /* SH7750R, SH7751 and SH7751R all have two extra timer channels */ @@ -205,7 +199,7 @@ static struct intc_mask_reg mask_registers[] __initdata = { }; static DECLARE_INTC_DESC(intc_desc_tmu34, "sh7750_tmu34", - vectors_tmu34, NULL, priorities, + vectors_tmu34, NULL, mask_registers, prio_registers, NULL); #endif @@ -216,7 +210,7 @@ static struct intc_vect vectors_irlm[] __initdata = { }; static DECLARE_INTC_DESC(intc_desc_irlm, "sh7750_irlm", vectors_irlm, NULL, - priorities, NULL, prio_registers, NULL); + NULL, prio_registers, NULL); /* SH7751 and SH7751R both have PCI */ #if defined(CONFIG_CPU_SUBTYPE_SH7751) || defined(CONFIG_CPU_SUBTYPE_SH7751R) @@ -233,7 +227,7 @@ static struct intc_group groups_pci[] __initdata = { }; static DECLARE_INTC_DESC(intc_desc_pci, "sh7750_pci", vectors_pci, groups_pci, - priorities, mask_registers, prio_registers, NULL); + mask_registers, prio_registers, NULL); #endif #if defined(CONFIG_CPU_SUBTYPE_SH7750) || \ diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7760.c b/arch/sh/kernel/cpu/sh4/setup-sh7760.c index 7a898cb1d940..85f81579b97e 100644 --- a/arch/sh/kernel/cpu/sh4/setup-sh7760.c +++ b/arch/sh/kernel/cpu/sh4/setup-sh7760.c @@ -92,15 +92,6 @@ static struct intc_group groups[] __initdata = { INTC_GROUP(REF, REF_RCMI, REF_ROVI), }; -static struct intc_prio priorities[] __initdata = { - INTC_PRIO(SCIF0, 3), - INTC_PRIO(SCIF1, 3), - INTC_PRIO(SCIF2, 3), - INTC_PRIO(SIM, 3), - INTC_PRIO(DMAC, 7), - INTC_PRIO(DMABRG, 13), -}; - static struct intc_mask_reg mask_registers[] __initdata = { { 0xfe080040, 0xfe080060, 32, /* INTMSK00 / INTMSKCLR00 */ { IRQ4, IRQ5, IRQ6, IRQ7, 0, 0, HCAN20, HCAN21, @@ -132,7 +123,7 @@ static struct intc_prio_reg prio_registers[] __initdata = { }; static DECLARE_INTC_DESC(intc_desc, "sh7760", vectors, groups, - priorities, mask_registers, prio_registers, NULL); + mask_registers, prio_registers, NULL); static struct intc_vect vectors_irq[] __initdata = { INTC_VECT(IRL0, 0x240), INTC_VECT(IRL1, 0x2a0), @@ -140,7 +131,7 @@ static struct intc_vect vectors_irq[] __initdata = { }; static DECLARE_INTC_DESC(intc_desc_irq, "sh7760-irq", vectors_irq, groups, - priorities, mask_registers, prio_registers, NULL); + mask_registers, prio_registers, NULL); static struct plat_sci_port sci_platform_data[] = { { diff --git a/arch/sh/kernel/cpu/sh4/softfloat.c b/arch/sh/kernel/cpu/sh4/softfloat.c new file mode 100644 index 000000000000..7b2d337ee412 --- /dev/null +++ b/arch/sh/kernel/cpu/sh4/softfloat.c @@ -0,0 +1,892 @@ +/* + * Floating point emulation support for subnormalised numbers on SH4 + * architecture This file is derived from the SoftFloat IEC/IEEE + * Floating-point Arithmetic Package, Release 2 the original license of + * which is reproduced below. + * + * ======================================================================== + * + * This C source file is part of the SoftFloat IEC/IEEE Floating-point + * Arithmetic Package, Release 2. + * + * Written by John R. Hauser. This work was made possible in part by the + * International Computer Science Institute, located at Suite 600, 1947 Center + * Street, Berkeley, California 94704. Funding was partially provided by the + * National Science Foundation under grant MIP-9311980. The original version + * of this code was written as part of a project to build a fixed-point vector + * processor in collaboration with the University of California at Berkeley, + * overseen by Profs. Nelson Morgan and John Wawrzynek. More information + * is available through the web page `http://HTTP.CS.Berkeley.EDU/~jhauser/ + * arithmetic/softfloat.html'. + * + * THIS SOFTWARE IS DISTRIBUTED AS IS, FOR FREE. Although reasonable effort + * has been made to avoid it, THIS SOFTWARE MAY CONTAIN FAULTS THAT WILL AT + * TIMES RESULT IN INCORRECT BEHAVIOR. USE OF THIS SOFTWARE IS RESTRICTED TO + * PERSONS AND ORGANIZATIONS WHO CAN AND WILL TAKE FULL RESPONSIBILITY FOR ANY + * AND ALL LOSSES, COSTS, OR OTHER PROBLEMS ARISING FROM ITS USE. + * + * Derivative works are acceptable, even for commercial purposes, so long as + * (1) they include prominent notice that the work is derivative, and (2) they + * include prominent notice akin to these three paragraphs for those parts of + * this code that are retained. + * + * ======================================================================== + * + * SH4 modifications by Ismail Dhaoui <ismail.dhaoui@st.com> + * and Kamel Khelifi <kamel.khelifi@st.com> + */ +#include <linux/kernel.h> +#include <asm/cpu/fpu.h> + +#define LIT64( a ) a##LL + +typedef char flag; +typedef unsigned char uint8; +typedef signed char int8; +typedef int uint16; +typedef int int16; +typedef unsigned int uint32; +typedef signed int int32; + +typedef unsigned long long int bits64; +typedef signed long long int sbits64; + +typedef unsigned char bits8; +typedef signed char sbits8; +typedef unsigned short int bits16; +typedef signed short int sbits16; +typedef unsigned int bits32; +typedef signed int sbits32; + +typedef unsigned long long int uint64; +typedef signed long long int int64; + +typedef unsigned long int float32; +typedef unsigned long long float64; + +extern void float_raise(unsigned int flags); /* in fpu.c */ +extern int float_rounding_mode(void); /* in fpu.c */ + +inline bits64 extractFloat64Frac(float64 a); +inline flag extractFloat64Sign(float64 a); +inline int16 extractFloat64Exp(float64 a); +inline int16 extractFloat32Exp(float32 a); +inline flag extractFloat32Sign(float32 a); +inline bits32 extractFloat32Frac(float32 a); +inline float64 packFloat64(flag zSign, int16 zExp, bits64 zSig); +inline void shift64RightJamming(bits64 a, int16 count, bits64 * zPtr); +inline float32 packFloat32(flag zSign, int16 zExp, bits32 zSig); +inline void shift32RightJamming(bits32 a, int16 count, bits32 * zPtr); +float64 float64_sub(float64 a, float64 b); +float32 float32_sub(float32 a, float32 b); +float32 float32_add(float32 a, float32 b); +float64 float64_add(float64 a, float64 b); +float64 float64_div(float64 a, float64 b); +float32 float32_div(float32 a, float32 b); +float32 float32_mul(float32 a, float32 b); +float64 float64_mul(float64 a, float64 b); +inline void add128(bits64 a0, bits64 a1, bits64 b0, bits64 b1, bits64 * z0Ptr, + bits64 * z1Ptr); +inline void sub128(bits64 a0, bits64 a1, bits64 b0, bits64 b1, bits64 * z0Ptr, + bits64 * z1Ptr); +inline void mul64To128(bits64 a, bits64 b, bits64 * z0Ptr, bits64 * z1Ptr); + +static int8 countLeadingZeros32(bits32 a); +static int8 countLeadingZeros64(bits64 a); +static float64 normalizeRoundAndPackFloat64(flag zSign, int16 zExp, + bits64 zSig); +static float64 subFloat64Sigs(float64 a, float64 b, flag zSign); +static float64 addFloat64Sigs(float64 a, float64 b, flag zSign); +static float32 roundAndPackFloat32(flag zSign, int16 zExp, bits32 zSig); +static float32 normalizeRoundAndPackFloat32(flag zSign, int16 zExp, + bits32 zSig); +static float64 roundAndPackFloat64(flag zSign, int16 zExp, bits64 zSig); +static float32 subFloat32Sigs(float32 a, float32 b, flag zSign); +static float32 addFloat32Sigs(float32 a, float32 b, flag zSign); +static void normalizeFloat64Subnormal(bits64 aSig, int16 * zExpPtr, + bits64 * zSigPtr); +static bits64 estimateDiv128To64(bits64 a0, bits64 a1, bits64 b); +static void normalizeFloat32Subnormal(bits32 aSig, int16 * zExpPtr, + bits32 * zSigPtr); + +inline bits64 extractFloat64Frac(float64 a) +{ + return a & LIT64(0x000FFFFFFFFFFFFF); +} + +inline flag extractFloat64Sign(float64 a) +{ + return a >> 63; +} + +inline int16 extractFloat64Exp(float64 a) +{ + return (a >> 52) & 0x7FF; +} + +inline int16 extractFloat32Exp(float32 a) +{ + return (a >> 23) & 0xFF; +} + +inline flag extractFloat32Sign(float32 a) +{ + return a >> 31; +} + +inline bits32 extractFloat32Frac(float32 a) +{ + return a & 0x007FFFFF; +} + +inline float64 packFloat64(flag zSign, int16 zExp, bits64 zSig) +{ + return (((bits64) zSign) << 63) + (((bits64) zExp) << 52) + zSig; +} + +inline void shift64RightJamming(bits64 a, int16 count, bits64 * zPtr) +{ + bits64 z; + + if (count == 0) { + z = a; + } else if (count < 64) { + z = (a >> count) | ((a << ((-count) & 63)) != 0); + } else { + z = (a != 0); + } + *zPtr = z; +} + +static int8 countLeadingZeros32(bits32 a) +{ + static const int8 countLeadingZerosHigh[] = { + 8, 7, 6, 6, 5, 5, 5, 5, 4, 4, 4, 4, 4, 4, 4, 4, + 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 + }; + int8 shiftCount; + + shiftCount = 0; + if (a < 0x10000) { + shiftCount += 16; + a <<= 16; + } + if (a < 0x1000000) { + shiftCount += 8; + a <<= 8; + } + shiftCount += countLeadingZerosHigh[a >> 24]; + return shiftCount; + +} + +static int8 countLeadingZeros64(bits64 a) +{ + int8 shiftCount; + + shiftCount = 0; + if (a < ((bits64) 1) << 32) { + shiftCount += 32; + } else { + a >>= 32; + } + shiftCount += countLeadingZeros32(a); + return shiftCount; + +} + +static float64 normalizeRoundAndPackFloat64(flag zSign, int16 zExp, bits64 zSig) +{ + int8 shiftCount; + + shiftCount = countLeadingZeros64(zSig) - 1; + return roundAndPackFloat64(zSign, zExp - shiftCount, + zSig << shiftCount); + +} + +static float64 subFloat64Sigs(float64 a, float64 b, flag zSign) +{ + int16 aExp, bExp, zExp; + bits64 aSig, bSig, zSig; + int16 expDiff; + + aSig = extractFloat64Frac(a); + aExp = extractFloat64Exp(a); + bSig = extractFloat64Frac(b); + bExp = extractFloat64Exp(b); + expDiff = aExp - bExp; + aSig <<= 10; + bSig <<= 10; + if (0 < expDiff) + goto aExpBigger; + if (expDiff < 0) + goto bExpBigger; + if (aExp == 0) { + aExp = 1; + bExp = 1; + } + if (bSig < aSig) + goto aBigger; + if (aSig < bSig) + goto bBigger; + return packFloat64(float_rounding_mode() == FPSCR_RM_ZERO, 0, 0); + bExpBigger: + if (bExp == 0x7FF) { + return packFloat64(zSign ^ 1, 0x7FF, 0); + } + if (aExp == 0) { + ++expDiff; + } else { + aSig |= LIT64(0x4000000000000000); + } + shift64RightJamming(aSig, -expDiff, &aSig); + bSig |= LIT64(0x4000000000000000); + bBigger: + zSig = bSig - aSig; + zExp = bExp; + zSign ^= 1; + goto normalizeRoundAndPack; + aExpBigger: + if (aExp == 0x7FF) { + return a; + } + if (bExp == 0) { + --expDiff; + } else { + bSig |= LIT64(0x4000000000000000); + } + shift64RightJamming(bSig, expDiff, &bSig); + aSig |= LIT64(0x4000000000000000); + aBigger: + zSig = aSig - bSig; + zExp = aExp; + normalizeRoundAndPack: + --zExp; + return normalizeRoundAndPackFloat64(zSign, zExp, zSig); + +} +static float64 addFloat64Sigs(float64 a, float64 b, flag zSign) +{ + int16 aExp, bExp, zExp; + bits64 aSig, bSig, zSig; + int16 expDiff; + + aSig = extractFloat64Frac(a); + aExp = extractFloat64Exp(a); + bSig = extractFloat64Frac(b); + bExp = extractFloat64Exp(b); + expDiff = aExp - bExp; + aSig <<= 9; + bSig <<= 9; + if (0 < expDiff) { + if (aExp == 0x7FF) { + return a; + } + if (bExp == 0) { + --expDiff; + } else { + bSig |= LIT64(0x2000000000000000); + } + shift64RightJamming(bSig, expDiff, &bSig); + zExp = aExp; + } else if (expDiff < 0) { + if (bExp == 0x7FF) { + return packFloat64(zSign, 0x7FF, 0); + } + if (aExp == 0) { + ++expDiff; + } else { + aSig |= LIT64(0x2000000000000000); + } + shift64RightJamming(aSig, -expDiff, &aSig); + zExp = bExp; + } else { + if (aExp == 0x7FF) { + return a; + } + if (aExp == 0) + return packFloat64(zSign, 0, (aSig + bSig) >> 9); + zSig = LIT64(0x4000000000000000) + aSig + bSig; + zExp = aExp; + goto roundAndPack; + } + aSig |= LIT64(0x2000000000000000); + zSig = (aSig + bSig) << 1; + --zExp; + if ((sbits64) zSig < 0) { + zSig = aSig + bSig; + ++zExp; + } + roundAndPack: + return roundAndPackFloat64(zSign, zExp, zSig); + +} + +inline float32 packFloat32(flag zSign, int16 zExp, bits32 zSig) +{ + return (((bits32) zSign) << 31) + (((bits32) zExp) << 23) + zSig; +} + +inline void shift32RightJamming(bits32 a, int16 count, bits32 * zPtr) +{ + bits32 z; + if (count == 0) { + z = a; + } else if (count < 32) { + z = (a >> count) | ((a << ((-count) & 31)) != 0); + } else { + z = (a != 0); + } + *zPtr = z; +} + +static float32 roundAndPackFloat32(flag zSign, int16 zExp, bits32 zSig) +{ + flag roundNearestEven; + int8 roundIncrement, roundBits; + flag isTiny; + + /* SH4 has only 2 rounding modes - round to nearest and round to zero */ + roundNearestEven = (float_rounding_mode() == FPSCR_RM_NEAREST); + roundIncrement = 0x40; + if (!roundNearestEven) { + roundIncrement = 0; + } + roundBits = zSig & 0x7F; + if (0xFD <= (bits16) zExp) { + if ((0xFD < zExp) + || ((zExp == 0xFD) + && ((sbits32) (zSig + roundIncrement) < 0)) + ) { + float_raise(FPSCR_CAUSE_OVERFLOW | FPSCR_CAUSE_INEXACT); + return packFloat32(zSign, 0xFF, + 0) - (roundIncrement == 0); + } + if (zExp < 0) { + isTiny = (zExp < -1) + || (zSig + roundIncrement < 0x80000000); + shift32RightJamming(zSig, -zExp, &zSig); + zExp = 0; + roundBits = zSig & 0x7F; + if (isTiny && roundBits) + float_raise(FPSCR_CAUSE_UNDERFLOW); + } + } + if (roundBits) + float_raise(FPSCR_CAUSE_INEXACT); + zSig = (zSig + roundIncrement) >> 7; + zSig &= ~(((roundBits ^ 0x40) == 0) & roundNearestEven); + if (zSig == 0) + zExp = 0; + return packFloat32(zSign, zExp, zSig); + +} + +static float32 normalizeRoundAndPackFloat32(flag zSign, int16 zExp, bits32 zSig) +{ + int8 shiftCount; + + shiftCount = countLeadingZeros32(zSig) - 1; + return roundAndPackFloat32(zSign, zExp - shiftCount, + zSig << shiftCount); +} + +static float64 roundAndPackFloat64(flag zSign, int16 zExp, bits64 zSig) +{ + flag roundNearestEven; + int16 roundIncrement, roundBits; + flag isTiny; + + /* SH4 has only 2 rounding modes - round to nearest and round to zero */ + roundNearestEven = (float_rounding_mode() == FPSCR_RM_NEAREST); + roundIncrement = 0x200; + if (!roundNearestEven) { + roundIncrement = 0; + } + roundBits = zSig & 0x3FF; + if (0x7FD <= (bits16) zExp) { + if ((0x7FD < zExp) + || ((zExp == 0x7FD) + && ((sbits64) (zSig + roundIncrement) < 0)) + ) { + float_raise(FPSCR_CAUSE_OVERFLOW | FPSCR_CAUSE_INEXACT); + return packFloat64(zSign, 0x7FF, + 0) - (roundIncrement == 0); + } + if (zExp < 0) { + isTiny = (zExp < -1) + || (zSig + roundIncrement < + LIT64(0x8000000000000000)); + shift64RightJamming(zSig, -zExp, &zSig); + zExp = 0; + roundBits = zSig & 0x3FF; + if (isTiny && roundBits) + float_raise(FPSCR_CAUSE_UNDERFLOW); + } + } + if (roundBits) + float_raise(FPSCR_CAUSE_INEXACT); + zSig = (zSig + roundIncrement) >> 10; + zSig &= ~(((roundBits ^ 0x200) == 0) & roundNearestEven); + if (zSig == 0) + zExp = 0; + return packFloat64(zSign, zExp, zSig); + +} + +static float32 subFloat32Sigs(float32 a, float32 b, flag zSign) +{ + int16 aExp, bExp, zExp; + bits32 aSig, bSig, zSig; + int16 expDiff; + + aSig = extractFloat32Frac(a); + aExp = extractFloat32Exp(a); + bSig = extractFloat32Frac(b); + bExp = extractFloat32Exp(b); + expDiff = aExp - bExp; + aSig <<= 7; + bSig <<= 7; + if (0 < expDiff) + goto aExpBigger; + if (expDiff < 0) + goto bExpBigger; + if (aExp == 0) { + aExp = 1; + bExp = 1; + } + if (bSig < aSig) + goto aBigger; + if (aSig < bSig) + goto bBigger; + return packFloat32(float_rounding_mode() == FPSCR_RM_ZERO, 0, 0); + bExpBigger: + if (bExp == 0xFF) { + return packFloat32(zSign ^ 1, 0xFF, 0); + } + if (aExp == 0) { + ++expDiff; + } else { + aSig |= 0x40000000; + } + shift32RightJamming(aSig, -expDiff, &aSig); + bSig |= 0x40000000; + bBigger: + zSig = bSig - aSig; + zExp = bExp; + zSign ^= 1; + goto normalizeRoundAndPack; + aExpBigger: + if (aExp == 0xFF) { + return a; + } + if (bExp == 0) { + --expDiff; + } else { + bSig |= 0x40000000; + } + shift32RightJamming(bSig, expDiff, &bSig); + aSig |= 0x40000000; + aBigger: + zSig = aSig - bSig; + zExp = aExp; + normalizeRoundAndPack: + --zExp; + return normalizeRoundAndPackFloat32(zSign, zExp, zSig); + +} + +static float32 addFloat32Sigs(float32 a, float32 b, flag zSign) +{ + int16 aExp, bExp, zExp; + bits32 aSig, bSig, zSig; + int16 expDiff; + + aSig = extractFloat32Frac(a); + aExp = extractFloat32Exp(a); + bSig = extractFloat32Frac(b); + bExp = extractFloat32Exp(b); + expDiff = aExp - bExp; + aSig <<= 6; + bSig <<= 6; + if (0 < expDiff) { + if (aExp == 0xFF) { + return a; + } + if (bExp == 0) { + --expDiff; + } else { + bSig |= 0x20000000; + } + shift32RightJamming(bSig, expDiff, &bSig); + zExp = aExp; + } else if (expDiff < 0) { + if (bExp == 0xFF) { + return packFloat32(zSign, 0xFF, 0); + } + if (aExp == 0) { + ++expDiff; + } else { + aSig |= 0x20000000; + } + shift32RightJamming(aSig, -expDiff, &aSig); + zExp = bExp; + } else { + if (aExp == 0xFF) { + return a; + } + if (aExp == 0) + return packFloat32(zSign, 0, (aSig + bSig) >> 6); + zSig = 0x40000000 + aSig + bSig; + zExp = aExp; + goto roundAndPack; + } + aSig |= 0x20000000; + zSig = (aSig + bSig) << 1; + --zExp; + if ((sbits32) zSig < 0) { + zSig = aSig + bSig; + ++zExp; + } + roundAndPack: + return roundAndPackFloat32(zSign, zExp, zSig); + +} + +float64 float64_sub(float64 a, float64 b) +{ + flag aSign, bSign; + + aSign = extractFloat64Sign(a); + bSign = extractFloat64Sign(b); + if (aSign == bSign) { + return subFloat64Sigs(a, b, aSign); + } else { + return addFloat64Sigs(a, b, aSign); + } + +} + +float32 float32_sub(float32 a, float32 b) +{ + flag aSign, bSign; + + aSign = extractFloat32Sign(a); + bSign = extractFloat32Sign(b); + if (aSign == bSign) { + return subFloat32Sigs(a, b, aSign); + } else { + return addFloat32Sigs(a, b, aSign); + } + +} + +float32 float32_add(float32 a, float32 b) +{ + flag aSign, bSign; + + aSign = extractFloat32Sign(a); + bSign = extractFloat32Sign(b); + if (aSign == bSign) { + return addFloat32Sigs(a, b, aSign); + } else { + return subFloat32Sigs(a, b, aSign); + } + +} + +float64 float64_add(float64 a, float64 b) +{ + flag aSign, bSign; + + aSign = extractFloat64Sign(a); + bSign = extractFloat64Sign(b); + if (aSign == bSign) { + return addFloat64Sigs(a, b, aSign); + } else { + return subFloat64Sigs(a, b, aSign); + } +} + +static void +normalizeFloat64Subnormal(bits64 aSig, int16 * zExpPtr, bits64 * zSigPtr) +{ + int8 shiftCount; + + shiftCount = countLeadingZeros64(aSig) - 11; + *zSigPtr = aSig << shiftCount; + *zExpPtr = 1 - shiftCount; +} + +inline void add128(bits64 a0, bits64 a1, bits64 b0, bits64 b1, bits64 * z0Ptr, + bits64 * z1Ptr) +{ + bits64 z1; + + z1 = a1 + b1; + *z1Ptr = z1; + *z0Ptr = a0 + b0 + (z1 < a1); +} + +inline void +sub128(bits64 a0, bits64 a1, bits64 b0, bits64 b1, bits64 * z0Ptr, + bits64 * z1Ptr) +{ + *z1Ptr = a1 - b1; + *z0Ptr = a0 - b0 - (a1 < b1); +} + +static bits64 estimateDiv128To64(bits64 a0, bits64 a1, bits64 b) +{ + bits64 b0, b1; + bits64 rem0, rem1, term0, term1; + bits64 z; + if (b <= a0) + return LIT64(0xFFFFFFFFFFFFFFFF); + b0 = b >> 32; + z = (b0 << 32 <= a0) ? LIT64(0xFFFFFFFF00000000) : (a0 / b0) << 32; + mul64To128(b, z, &term0, &term1); + sub128(a0, a1, term0, term1, &rem0, &rem1); + while (((sbits64) rem0) < 0) { + z -= LIT64(0x100000000); + b1 = b << 32; + add128(rem0, rem1, b0, b1, &rem0, &rem1); + } + rem0 = (rem0 << 32) | (rem1 >> 32); + z |= (b0 << 32 <= rem0) ? 0xFFFFFFFF : rem0 / b0; + return z; +} + +inline void mul64To128(bits64 a, bits64 b, bits64 * z0Ptr, bits64 * z1Ptr) +{ + bits32 aHigh, aLow, bHigh, bLow; + bits64 z0, zMiddleA, zMiddleB, z1; + + aLow = a; + aHigh = a >> 32; + bLow = b; + bHigh = b >> 32; + z1 = ((bits64) aLow) * bLow; + zMiddleA = ((bits64) aLow) * bHigh; + zMiddleB = ((bits64) aHigh) * bLow; + z0 = ((bits64) aHigh) * bHigh; + zMiddleA += zMiddleB; + z0 += (((bits64) (zMiddleA < zMiddleB)) << 32) + (zMiddleA >> 32); + zMiddleA <<= 32; + z1 += zMiddleA; + z0 += (z1 < zMiddleA); + *z1Ptr = z1; + *z0Ptr = z0; + +} + +static void normalizeFloat32Subnormal(bits32 aSig, int16 * zExpPtr, + bits32 * zSigPtr) +{ + int8 shiftCount; + + shiftCount = countLeadingZeros32(aSig) - 8; + *zSigPtr = aSig << shiftCount; + *zExpPtr = 1 - shiftCount; + +} + +float64 float64_div(float64 a, float64 b) +{ + flag aSign, bSign, zSign; + int16 aExp, bExp, zExp; + bits64 aSig, bSig, zSig; + bits64 rem0, rem1; + bits64 term0, term1; + + aSig = extractFloat64Frac(a); + aExp = extractFloat64Exp(a); + aSign = extractFloat64Sign(a); + bSig = extractFloat64Frac(b); + bExp = extractFloat64Exp(b); + bSign = extractFloat64Sign(b); + zSign = aSign ^ bSign; + if (aExp == 0x7FF) { + if (bExp == 0x7FF) { + } + return packFloat64(zSign, 0x7FF, 0); + } + if (bExp == 0x7FF) { + return packFloat64(zSign, 0, 0); + } + if (bExp == 0) { + if (bSig == 0) { + if ((aExp | aSig) == 0) { + float_raise(FPSCR_CAUSE_INVALID); + } + return packFloat64(zSign, 0x7FF, 0); + } + normalizeFloat64Subnormal(bSig, &bExp, &bSig); + } + if (aExp == 0) { + if (aSig == 0) + return packFloat64(zSign, 0, 0); + normalizeFloat64Subnormal(aSig, &aExp, &aSig); + } + zExp = aExp - bExp + 0x3FD; + aSig = (aSig | LIT64(0x0010000000000000)) << 10; + bSig = (bSig | LIT64(0x0010000000000000)) << 11; + if (bSig <= (aSig + aSig)) { + aSig >>= 1; + ++zExp; + } + zSig = estimateDiv128To64(aSig, 0, bSig); + if ((zSig & 0x1FF) <= 2) { + mul64To128(bSig, zSig, &term0, &term1); + sub128(aSig, 0, term0, term1, &rem0, &rem1); + while ((sbits64) rem0 < 0) { + --zSig; + add128(rem0, rem1, 0, bSig, &rem0, &rem1); + } + zSig |= (rem1 != 0); + } + return roundAndPackFloat64(zSign, zExp, zSig); + +} + +float32 float32_div(float32 a, float32 b) +{ + flag aSign, bSign, zSign; + int16 aExp, bExp, zExp; + bits32 aSig, bSig, zSig; + + aSig = extractFloat32Frac(a); + aExp = extractFloat32Exp(a); + aSign = extractFloat32Sign(a); + bSig = extractFloat32Frac(b); + bExp = extractFloat32Exp(b); + bSign = extractFloat32Sign(b); + zSign = aSign ^ bSign; + if (aExp == 0xFF) { + if (bExp == 0xFF) { + } + return packFloat32(zSign, 0xFF, 0); + } + if (bExp == 0xFF) { + return packFloat32(zSign, 0, 0); + } + if (bExp == 0) { + if (bSig == 0) { + return packFloat32(zSign, 0xFF, 0); + } + normalizeFloat32Subnormal(bSig, &bExp, &bSig); + } + if (aExp == 0) { + if (aSig == 0) + return packFloat32(zSign, 0, 0); + normalizeFloat32Subnormal(aSig, &aExp, &aSig); + } + zExp = aExp - bExp + 0x7D; + aSig = (aSig | 0x00800000) << 7; + bSig = (bSig | 0x00800000) << 8; + if (bSig <= (aSig + aSig)) { + aSig >>= 1; + ++zExp; + } + zSig = (((bits64) aSig) << 32) / bSig; + if ((zSig & 0x3F) == 0) { + zSig |= (((bits64) bSig) * zSig != ((bits64) aSig) << 32); + } + return roundAndPackFloat32(zSign, zExp, zSig); + +} + +float32 float32_mul(float32 a, float32 b) +{ + char aSign, bSign, zSign; + int aExp, bExp, zExp; + unsigned int aSig, bSig; + unsigned long long zSig64; + unsigned int zSig; + + aSig = extractFloat32Frac(a); + aExp = extractFloat32Exp(a); + aSign = extractFloat32Sign(a); + bSig = extractFloat32Frac(b); + bExp = extractFloat32Exp(b); + bSign = extractFloat32Sign(b); + zSign = aSign ^ bSign; + if (aExp == 0) { + if (aSig == 0) + return packFloat32(zSign, 0, 0); + normalizeFloat32Subnormal(aSig, &aExp, &aSig); + } + if (bExp == 0) { + if (bSig == 0) + return packFloat32(zSign, 0, 0); + normalizeFloat32Subnormal(bSig, &bExp, &bSig); + } + if ((bExp == 0xff && bSig == 0) || (aExp == 0xff && aSig == 0)) + return roundAndPackFloat32(zSign, 0xff, 0); + + zExp = aExp + bExp - 0x7F; + aSig = (aSig | 0x00800000) << 7; + bSig = (bSig | 0x00800000) << 8; + shift64RightJamming(((unsigned long long)aSig) * bSig, 32, &zSig64); + zSig = zSig64; + if (0 <= (signed int)(zSig << 1)) { + zSig <<= 1; + --zExp; + } + return roundAndPackFloat32(zSign, zExp, zSig); + +} + +float64 float64_mul(float64 a, float64 b) +{ + char aSign, bSign, zSign; + int aExp, bExp, zExp; + unsigned long long int aSig, bSig, zSig0, zSig1; + + aSig = extractFloat64Frac(a); + aExp = extractFloat64Exp(a); + aSign = extractFloat64Sign(a); + bSig = extractFloat64Frac(b); + bExp = extractFloat64Exp(b); + bSign = extractFloat64Sign(b); + zSign = aSign ^ bSign; + + if (aExp == 0) { + if (aSig == 0) + return packFloat64(zSign, 0, 0); + normalizeFloat64Subnormal(aSig, &aExp, &aSig); + } + if (bExp == 0) { + if (bSig == 0) + return packFloat64(zSign, 0, 0); + normalizeFloat64Subnormal(bSig, &bExp, &bSig); + } + if ((aExp == 0x7ff && aSig == 0) || (bExp == 0x7ff && bSig == 0)) + return roundAndPackFloat64(zSign, 0x7ff, 0); + + zExp = aExp + bExp - 0x3FF; + aSig = (aSig | 0x0010000000000000LL) << 10; + bSig = (bSig | 0x0010000000000000LL) << 11; + mul64To128(aSig, bSig, &zSig0, &zSig1); + zSig0 |= (zSig1 != 0); + if (0 <= (signed long long int)(zSig0 << 1)) { + zSig0 <<= 1; + --zExp; + } + return roundAndPackFloat64(zSign, zExp, zSig0); +} diff --git a/arch/sh/kernel/cpu/sh4a/Makefile b/arch/sh/kernel/cpu/sh4a/Makefile index 24539873943a..08ac6387bf17 100644 --- a/arch/sh/kernel/cpu/sh4a/Makefile +++ b/arch/sh/kernel/cpu/sh4a/Makefile @@ -3,6 +3,7 @@ # # CPU subtype setup +obj-$(CONFIG_CPU_SUBTYPE_SH7763) += setup-sh7763.o obj-$(CONFIG_CPU_SUBTYPE_SH7770) += setup-sh7770.o obj-$(CONFIG_CPU_SUBTYPE_SH7780) += setup-sh7780.o obj-$(CONFIG_CPU_SUBTYPE_SH7785) += setup-sh7785.o @@ -14,6 +15,7 @@ obj-$(CONFIG_CPU_SUBTYPE_SHX3) += setup-shx3.o smp-$(CONFIG_CPU_SUBTYPE_SHX3) := smp-shx3.o # Primary on-chip clocks (common) +clock-$(CONFIG_CPU_SUBTYPE_SH7763) := clock-sh7763.o clock-$(CONFIG_CPU_SUBTYPE_SH7770) := clock-sh7770.o clock-$(CONFIG_CPU_SUBTYPE_SH7780) := clock-sh7780.o clock-$(CONFIG_CPU_SUBTYPE_SH7785) := clock-sh7785.o diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7763.c b/arch/sh/kernel/cpu/sh4a/clock-sh7763.c new file mode 100644 index 000000000000..45889d412c80 --- /dev/null +++ b/arch/sh/kernel/cpu/sh4a/clock-sh7763.c @@ -0,0 +1,126 @@ +/* + * arch/sh/kernel/cpu/sh4a/clock-sh7763.c + * + * SH7763 support for the clock framework + * + * Copyright (C) 2005 Paul Mundt + * Copyright (C) 2007 Yoshihiro Shimoda + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/init.h> +#include <linux/kernel.h> +#include <asm/clock.h> +#include <asm/freq.h> +#include <asm/io.h> + +static int bfc_divisors[] = { 1, 1, 1, 8, 1, 1, 1, 1 }; +static int p0fc_divisors[] = { 1, 1, 1, 8, 1, 1, 1, 1 }; +static int p1fc_divisors[] = { 1, 1, 1, 16, 1, 1, 1, 1 }; +static int cfc_divisors[] = { 1, 1, 4, 1, 1, 1, 1, 1 }; + +static void master_clk_init(struct clk *clk) +{ + clk->rate *= p0fc_divisors[(ctrl_inl(FRQCR) >> 4) & 0x07]; +} + +static struct clk_ops sh7763_master_clk_ops = { + .init = master_clk_init, +}; + +static void module_clk_recalc(struct clk *clk) +{ + int idx = ((ctrl_inl(FRQCR) >> 4) & 0x07); + clk->rate = clk->parent->rate / p0fc_divisors[idx]; +} + +static struct clk_ops sh7763_module_clk_ops = { + .recalc = module_clk_recalc, +}; + +static void bus_clk_recalc(struct clk *clk) +{ + int idx = ((ctrl_inl(FRQCR) >> 16) & 0x07); + clk->rate = clk->parent->rate / bfc_divisors[idx]; +} + +static struct clk_ops sh7763_bus_clk_ops = { + .recalc = bus_clk_recalc, +}; + +static void cpu_clk_recalc(struct clk *clk) +{ + clk->rate = clk->parent->rate; +} + +static struct clk_ops sh7763_cpu_clk_ops = { + .recalc = cpu_clk_recalc, +}; + +static struct clk_ops *sh7763_clk_ops[] = { + &sh7763_master_clk_ops, + &sh7763_module_clk_ops, + &sh7763_bus_clk_ops, + &sh7763_cpu_clk_ops, +}; + +void __init arch_init_clk_ops(struct clk_ops **ops, int idx) +{ + if (idx < ARRAY_SIZE(sh7763_clk_ops)) + *ops = sh7763_clk_ops[idx]; +} + +static void shyway_clk_recalc(struct clk *clk) +{ + int idx = ((ctrl_inl(FRQCR) >> 20) & 0x07); + clk->rate = clk->parent->rate / cfc_divisors[idx]; +} + +static struct clk_ops sh7763_shyway_clk_ops = { + .recalc = shyway_clk_recalc, +}; + +static struct clk sh7763_shyway_clk = { + .name = "shyway_clk", + .flags = CLK_ALWAYS_ENABLED, + .ops = &sh7763_shyway_clk_ops, +}; + +/* + * Additional SH7763-specific on-chip clocks that aren't already part of the + * clock framework + */ +static struct clk *sh7763_onchip_clocks[] = { + &sh7763_shyway_clk, +}; + +static int __init sh7763_clk_init(void) +{ + struct clk *clk = clk_get(NULL, "master_clk"); + int i; + + for (i = 0; i < ARRAY_SIZE(sh7763_onchip_clocks); i++) { + struct clk *clkp = sh7763_onchip_clocks[i]; + + clkp->parent = clk; + clk_register(clkp); + clk_enable(clkp); + } + + /* + * Now that we have the rest of the clocks registered, we need to + * force the parent clock to propagate so that these clocks will + * automatically figure out their rate. We cheat by handing the + * parent clock its current rate and forcing child propagation. + */ + clk_set_rate(clk, clk_get_rate(clk)); + + clk_put(clk); + + return 0; +} + +arch_initcall(sh7763_clk_init); + diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c index b9c6547c4a90..73c778d40d13 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c @@ -157,14 +157,6 @@ static struct intc_group groups[] __initdata = { INTC_GROUP(SDHI, SDHI0, SDHI1, SDHI2, SDHI3), }; -static struct intc_prio priorities[] __initdata = { - INTC_PRIO(SCIF0, 3), - INTC_PRIO(SCIF1, 3), - INTC_PRIO(SCIF2, 3), - INTC_PRIO(TMU0, 2), - INTC_PRIO(TMU1, 2), -}; - static struct intc_mask_reg mask_registers[] __initdata = { { 0xa4080080, 0xa40800c0, 8, /* IMR0 / IMCR0 */ { } }, @@ -217,7 +209,7 @@ static struct intc_sense_reg sense_registers[] __initdata = { { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } }, }; -static DECLARE_INTC_DESC(intc_desc, "sh7722", vectors, groups, priorities, +static DECLARE_INTC_DESC(intc_desc, "sh7722", vectors, groups, mask_registers, prio_registers, sense_registers); void __init plat_irq_setup(void) diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7763.c b/arch/sh/kernel/cpu/sh4a/setup-sh7763.c new file mode 100644 index 000000000000..eabd5386812d --- /dev/null +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7763.c @@ -0,0 +1,390 @@ +/* + * SH7763 Setup + * + * Copyright (C) 2006 Paul Mundt + * Copyright (C) 2007 Yoshihiro Shimoda + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/platform_device.h> +#include <linux/init.h> +#include <linux/serial.h> +#include <linux/io.h> +#include <asm/sci.h> + +static struct resource rtc_resources[] = { + [0] = { + .start = 0xffe80000, + .end = 0xffe80000 + 0x58 - 1, + .flags = IORESOURCE_IO, + }, + [1] = { + /* Period IRQ */ + .start = 21, + .flags = IORESOURCE_IRQ, + }, + [2] = { + /* Carry IRQ */ + .start = 22, + .flags = IORESOURCE_IRQ, + }, + [3] = { + /* Alarm IRQ */ + .start = 20, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device rtc_device = { + .name = "sh-rtc", + .id = -1, + .num_resources = ARRAY_SIZE(rtc_resources), + .resource = rtc_resources, +}; + +static struct plat_sci_port sci_platform_data[] = { + { + .mapbase = 0xffe00000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 40, 41, 43, 42 }, + }, { + .mapbase = 0xffe08000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 76, 77, 79, 78 }, + }, { + .flags = 0, + } +}; + +static struct platform_device sci_device = { + .name = "sh-sci", + .id = -1, + .dev = { + .platform_data = sci_platform_data, + }, +}; + +static struct resource usb_ohci_resources[] = { + [0] = { + .start = 0xffec8000, + .end = 0xffec80ff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 83, + .end = 83, + .flags = IORESOURCE_IRQ, + }, +}; + +static u64 usb_ohci_dma_mask = 0xffffffffUL; +static struct platform_device usb_ohci_device = { + .name = "sh_ohci", + .id = -1, + .dev = { + .dma_mask = &usb_ohci_dma_mask, + .coherent_dma_mask = 0xffffffff, + }, + .num_resources = ARRAY_SIZE(usb_ohci_resources), + .resource = usb_ohci_resources, +}; + +static struct resource usbf_resources[] = { + [0] = { + .start = 0xffec0000, + .end = 0xffec00ff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 84, + .end = 84, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device usbf_device = { + .name = "sh_udc", + .id = -1, + .dev = { + .dma_mask = NULL, + .coherent_dma_mask = 0xffffffff, + }, + .num_resources = ARRAY_SIZE(usbf_resources), + .resource = usbf_resources, +}; + +static struct platform_device *sh7763_devices[] __initdata = { + &rtc_device, + &sci_device, + &usb_ohci_device, + &usbf_device, +}; + +static int __init sh7763_devices_setup(void) +{ + return platform_add_devices(sh7763_devices, + ARRAY_SIZE(sh7763_devices)); +} +__initcall(sh7763_devices_setup); + +enum { + UNUSED = 0, + + /* interrupt sources */ + + IRL_LLLL, IRL_LLLH, IRL_LLHL, IRL_LLHH, + IRL_LHLL, IRL_LHLH, IRL_LHHL, IRL_LHHH, + IRL_HLLL, IRL_HLLH, IRL_HLHL, IRL_HLHH, + IRL_HHLL, IRL_HHLH, IRL_HHHL, + + IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7, + RTC_ATI, RTC_PRI, RTC_CUI, + WDT, TMU0, TMU1, TMU2, TMU2_TICPI, + HUDI, LCDC, + DMAC0_DMINT0, DMAC0_DMINT1, DMAC0_DMINT2, DMAC0_DMINT3, DMAC0_DMAE, + SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI, + DMAC0_DMINT4, DMAC0_DMINT5, + IIC0, IIC1, + CMT, + GEINT0, GEINT1, GEINT2, + HAC, + PCISERR, PCIINTA, PCIINTB, PCIINTC, PCIINTD, + PCIERR, PCIPWD3, PCIPWD2, PCIPWD1, PCIPWD0, + STIF0, STIF1, + SCIF1_ERI, SCIF1_RXI, SCIF1_BRI, SCIF1_TXI, + SIOF0, SIOF1, SIOF2, + USBH, USBFI0, USBFI1, + TPU, PCC, + MMCIF_FSTAT, MMCIF_TRAN, MMCIF_ERR, MMCIF_FRDY, + SIM_ERI, SIM_RXI, SIM_TXI, SIM_TEND, + TMU3, TMU4, TMU5, ADC, SSI0, SSI1, SSI2, SSI3, + SCIF2_ERI, SCIF2_RXI, SCIF2_BRI, SCIF2_TXI, + GPIO_CH0, GPIO_CH1, GPIO_CH2, GPIO_CH3, + + /* interrupt groups */ + + TMU012, TMU345, RTC, DMAC, SCIF0, GETHER, PCIC5, + SCIF1, USBF, MMCIF, SIM, SCIF2, GPIO, +}; + +static struct intc_vect vectors[] __initdata = { + INTC_VECT(RTC_ATI, 0x480), INTC_VECT(RTC_PRI, 0x4a0), + INTC_VECT(RTC_CUI, 0x4c0), + INTC_VECT(WDT, 0x560), INTC_VECT(TMU0, 0x580), + INTC_VECT(TMU1, 0x5a0), INTC_VECT(TMU2, 0x5c0), + INTC_VECT(TMU2_TICPI, 0x5e0), INTC_VECT(HUDI, 0x600), + INTC_VECT(LCDC, 0x620), + INTC_VECT(DMAC0_DMINT0, 0x640), INTC_VECT(DMAC0_DMINT1, 0x660), + INTC_VECT(DMAC0_DMINT2, 0x680), INTC_VECT(DMAC0_DMINT3, 0x6a0), + INTC_VECT(DMAC0_DMAE, 0x6c0), + INTC_VECT(SCIF0_ERI, 0x700), INTC_VECT(SCIF0_RXI, 0x720), + INTC_VECT(SCIF0_BRI, 0x740), INTC_VECT(SCIF0_TXI, 0x760), + INTC_VECT(DMAC0_DMINT4, 0x780), INTC_VECT(DMAC0_DMINT5, 0x7a0), + INTC_VECT(IIC0, 0x8A0), INTC_VECT(IIC1, 0x8C0), + INTC_VECT(CMT, 0x900), INTC_VECT(GEINT0, 0x920), + INTC_VECT(GEINT1, 0x940), INTC_VECT(GEINT2, 0x960), + INTC_VECT(HAC, 0x980), + INTC_VECT(PCISERR, 0xa00), INTC_VECT(PCIINTA, 0xa20), + INTC_VECT(PCIINTB, 0xa40), INTC_VECT(PCIINTC, 0xa60), + INTC_VECT(PCIINTD, 0xa80), INTC_VECT(PCIERR, 0xaa0), + INTC_VECT(PCIPWD3, 0xac0), INTC_VECT(PCIPWD2, 0xae0), + INTC_VECT(PCIPWD1, 0xb00), INTC_VECT(PCIPWD0, 0xb20), + INTC_VECT(STIF0, 0xb40), INTC_VECT(STIF1, 0xb60), + INTC_VECT(SCIF1_ERI, 0xb80), INTC_VECT(SCIF1_RXI, 0xba0), + INTC_VECT(SCIF1_BRI, 0xbc0), INTC_VECT(SCIF1_TXI, 0xbe0), + INTC_VECT(SIOF0, 0xc00), INTC_VECT(SIOF1, 0xc20), + INTC_VECT(USBH, 0xc60), INTC_VECT(USBFI0, 0xc80), + INTC_VECT(USBFI1, 0xca0), + INTC_VECT(TPU, 0xcc0), INTC_VECT(PCC, 0xce0), + INTC_VECT(MMCIF_FSTAT, 0xd00), INTC_VECT(MMCIF_TRAN, 0xd20), + INTC_VECT(MMCIF_ERR, 0xd40), INTC_VECT(MMCIF_FRDY, 0xd60), + INTC_VECT(SIM_ERI, 0xd80), INTC_VECT(SIM_RXI, 0xda0), + INTC_VECT(SIM_TXI, 0xdc0), INTC_VECT(SIM_TEND, 0xde0), + INTC_VECT(TMU3, 0xe00), INTC_VECT(TMU4, 0xe20), + INTC_VECT(TMU5, 0xe40), INTC_VECT(ADC, 0xe60), + INTC_VECT(SSI0, 0xe80), INTC_VECT(SSI1, 0xea0), + INTC_VECT(SSI2, 0xec0), INTC_VECT(SSI3, 0xee0), + INTC_VECT(SCIF1_ERI, 0xf00), INTC_VECT(SCIF1_RXI, 0xf20), + INTC_VECT(SCIF1_BRI, 0xf40), INTC_VECT(SCIF1_TXI, 0xf60), + INTC_VECT(GPIO_CH0, 0xf80), INTC_VECT(GPIO_CH1, 0xfa0), + INTC_VECT(GPIO_CH2, 0xfc0), INTC_VECT(GPIO_CH3, 0xfe0), +}; + +static struct intc_group groups[] __initdata = { + INTC_GROUP(TMU012, TMU0, TMU1, TMU2, TMU2_TICPI), + INTC_GROUP(TMU345, TMU3, TMU4, TMU5), + INTC_GROUP(RTC, RTC_ATI, RTC_PRI, RTC_CUI), + INTC_GROUP(DMAC, DMAC0_DMINT0, DMAC0_DMINT1, DMAC0_DMINT2, + DMAC0_DMINT3, DMAC0_DMINT4, DMAC0_DMINT5, DMAC0_DMAE), + INTC_GROUP(SCIF0, SCIF0_ERI, SCIF0_RXI, SCIF0_BRI, SCIF0_TXI), + INTC_GROUP(GETHER, GEINT0, GEINT1, GEINT2), + INTC_GROUP(PCIC5, PCIERR, PCIPWD3, PCIPWD2, PCIPWD1, PCIPWD0), + INTC_GROUP(SCIF1, SCIF1_ERI, SCIF1_RXI, SCIF1_BRI, SCIF1_TXI), + INTC_GROUP(USBF, USBFI0, USBFI1), + INTC_GROUP(MMCIF, MMCIF_FSTAT, MMCIF_TRAN, MMCIF_ERR, MMCIF_FRDY), + INTC_GROUP(SIM, SIM_ERI, SIM_RXI, SIM_TXI, SIM_TEND), + INTC_GROUP(SCIF2, SCIF2_ERI, SCIF2_RXI, SCIF2_BRI, SCIF2_TXI), + INTC_GROUP(GPIO, GPIO_CH0, GPIO_CH1, GPIO_CH2, GPIO_CH3), +}; + +static struct intc_prio priorities[] __initdata = { + INTC_PRIO(SCIF0, 3), + INTC_PRIO(SCIF1, 3), + INTC_PRIO(SCIF2, 3), +}; + +static struct intc_mask_reg mask_registers[] __initdata = { + { 0xffd40038, 0xffd4003c, 32, /* INT2MSKR / INT2MSKCR */ + { 0, 0, 0, 0, 0, 0, GPIO, 0, + SSI0, MMCIF, 0, SIOF0, PCIC5, PCIINTD, PCIINTC, PCIINTB, + PCIINTA, PCISERR, HAC, CMT, 0, 0, 0, DMAC, + HUDI, 0, WDT, SCIF1, SCIF0, RTC, TMU345, TMU012 } }, + { 0xffd400d0, 0xffd400d4, 32, /* INT2MSKR1 / INT2MSKCR1 */ + { 0, 0, 0, 0, 0, 0, SCIF2, USBF, + 0, 0, STIF1, STIF0, 0, 0, USBH, GETHER, + PCC, 0, 0, ADC, TPU, SIM, SIOF2, SIOF1, + LCDC, 0, IIC1, IIC0, SSI3, SSI2, SSI1, 0 } }, +}; + +static struct intc_prio_reg prio_registers[] __initdata = { + { 0xffd40000, 0, 32, 8, /* INT2PRI0 */ { TMU0, TMU1, + TMU2, TMU2_TICPI } }, + { 0xffd40004, 0, 32, 8, /* INT2PRI1 */ { TMU3, TMU4, TMU5, RTC } }, + { 0xffd40008, 0, 32, 8, /* INT2PRI2 */ { SCIF0, SCIF1, WDT } }, + { 0xffd4000c, 0, 32, 8, /* INT2PRI3 */ { HUDI, DMAC, ADC } }, + { 0xffd40010, 0, 32, 8, /* INT2PRI4 */ { CMT, HAC, + PCISERR, PCIINTA } }, + { 0xffd40014, 0, 32, 8, /* INT2PRI5 */ { PCIINTB, PCIINTC, + PCIINTD, PCIC5 } }, + { 0xffd40018, 0, 32, 8, /* INT2PRI6 */ { SIOF0, USBF, MMCIF, SSI0 } }, + { 0xffd4001c, 0, 32, 8, /* INT2PRI7 */ { SCIF2, GPIO } }, + { 0xffd400a0, 0, 32, 8, /* INT2PRI8 */ { SSI3, SSI2, SSI1, 0 } }, + { 0xffd400a4, 0, 32, 8, /* INT2PRI9 */ { LCDC, 0, IIC1, IIC0 } }, + { 0xffd400a8, 0, 32, 8, /* INT2PRI10 */ { TPU, SIM, SIOF2, SIOF1 } }, + { 0xffd400ac, 0, 32, 8, /* INT2PRI11 */ { PCC } }, + { 0xffd400b0, 0, 32, 8, /* INT2PRI12 */ { 0, 0, USBH, GETHER } }, + { 0xffd400b4, 0, 32, 8, /* INT2PRI13 */ { 0, 0, STIF1, STIF0 } }, +}; + +static DECLARE_INTC_DESC(intc_desc, "sh7763", vectors, groups, priorities, + mask_registers, prio_registers, NULL); + +/* Support for external interrupt pins in IRQ mode */ + +static struct intc_vect irq_vectors[] __initdata = { + INTC_VECT(IRQ0, 0x240), INTC_VECT(IRQ1, 0x280), + INTC_VECT(IRQ2, 0x2c0), INTC_VECT(IRQ3, 0x300), + INTC_VECT(IRQ4, 0x340), INTC_VECT(IRQ5, 0x380), + INTC_VECT(IRQ6, 0x3c0), INTC_VECT(IRQ7, 0x200), +}; + +static struct intc_mask_reg irq_mask_registers[] __initdata = { + { 0xffd00044, 0xffd00064, 32, /* INTMSK0 / INTMSKCLR0 */ + { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } }, +}; + +static struct intc_prio_reg irq_prio_registers[] __initdata = { + { 0xffd00010, 0, 32, 4, /* INTPRI */ { IRQ0, IRQ1, IRQ2, IRQ3, + IRQ4, IRQ5, IRQ6, IRQ7 } }, +}; + +static struct intc_sense_reg irq_sense_registers[] __initdata = { + { 0xffd0001c, 32, 2, /* ICR1 */ { IRQ0, IRQ1, IRQ2, IRQ3, + IRQ4, IRQ5, IRQ6, IRQ7 } }, +}; + +static DECLARE_INTC_DESC(intc_irq_desc, "sh7763-irq", irq_vectors, + NULL, NULL, irq_mask_registers, irq_prio_registers, + irq_sense_registers); + +/* External interrupt pins in IRL mode */ + +static struct intc_vect irl_vectors[] __initdata = { + INTC_VECT(IRL_LLLL, 0x200), INTC_VECT(IRL_LLLH, 0x220), + INTC_VECT(IRL_LLHL, 0x240), INTC_VECT(IRL_LLHH, 0x260), + INTC_VECT(IRL_LHLL, 0x280), INTC_VECT(IRL_LHLH, 0x2a0), + INTC_VECT(IRL_LHHL, 0x2c0), INTC_VECT(IRL_LHHH, 0x2e0), + INTC_VECT(IRL_HLLL, 0x300), INTC_VECT(IRL_HLLH, 0x320), + INTC_VECT(IRL_HLHL, 0x340), INTC_VECT(IRL_HLHH, 0x360), + INTC_VECT(IRL_HHLL, 0x380), INTC_VECT(IRL_HHLH, 0x3a0), + INTC_VECT(IRL_HHHL, 0x3c0), +}; + +static struct intc_mask_reg irl3210_mask_registers[] __initdata = { + { 0xffd40080, 0xffd40084, 32, /* INTMSK2 / INTMSKCLR2 */ + { IRL_LLLL, IRL_LLLH, IRL_LLHL, IRL_LLHH, + IRL_LHLL, IRL_LHLH, IRL_LHHL, IRL_LHHH, + IRL_HLLL, IRL_HLLH, IRL_HLHL, IRL_HLHH, + IRL_HHLL, IRL_HHLH, IRL_HHHL, } }, +}; + +static struct intc_mask_reg irl7654_mask_registers[] __initdata = { + { 0xffd40080, 0xffd40084, 32, /* INTMSK2 / INTMSKCLR2 */ + { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + IRL_LLLL, IRL_LLLH, IRL_LLHL, IRL_LLHH, + IRL_LHLL, IRL_LHLH, IRL_LHHL, IRL_LHHH, + IRL_HLLL, IRL_HLLH, IRL_HLHL, IRL_HLHH, + IRL_HHLL, IRL_HHLH, IRL_HHHL, } }, +}; + +static DECLARE_INTC_DESC(intc_irl7654_desc, "sh7763-irl7654", irl_vectors, + NULL, NULL, irl7654_mask_registers, NULL, NULL); + +static DECLARE_INTC_DESC(intc_irl3210_desc, "sh7763-irl3210", irl_vectors, + NULL, NULL, irl3210_mask_registers, NULL, NULL); + +#define INTC_ICR0 0xffd00000 +#define INTC_INTMSK0 0xffd00044 +#define INTC_INTMSK1 0xffd00048 +#define INTC_INTMSK2 0xffd40080 +#define INTC_INTMSKCLR1 0xffd00068 +#define INTC_INTMSKCLR2 0xffd40084 + +void __init plat_irq_setup(void) +{ + /* disable IRQ7-0 */ + ctrl_outl(0xff000000, INTC_INTMSK0); + + /* disable IRL3-0 + IRL7-4 */ + ctrl_outl(0xc0000000, INTC_INTMSK1); + ctrl_outl(0xfffefffe, INTC_INTMSK2); + + register_intc_controller(&intc_desc); +} + +void __init plat_irq_setup_pins(int mode) +{ + switch (mode) { + case IRQ_MODE_IRQ: + /* select IRQ mode for IRL3-0 + IRL7-4 */ + ctrl_outl(ctrl_inl(INTC_ICR0) | 0x00c00000, INTC_ICR0); + register_intc_controller(&intc_irq_desc); + break; + case IRQ_MODE_IRL7654: + /* enable IRL7-4 but don't provide any masking */ + ctrl_outl(0x40000000, INTC_INTMSKCLR1); + ctrl_outl(0x0000fffe, INTC_INTMSKCLR2); + break; + case IRQ_MODE_IRL3210: + /* enable IRL0-3 but don't provide any masking */ + ctrl_outl(0x80000000, INTC_INTMSKCLR1); + ctrl_outl(0xfffe0000, INTC_INTMSKCLR2); + break; + case IRQ_MODE_IRL7654_MASK: + /* enable IRL7-4 and mask using cpu intc controller */ + ctrl_outl(0x40000000, INTC_INTMSKCLR1); + register_intc_controller(&intc_irl7654_desc); + break; + case IRQ_MODE_IRL3210_MASK: + /* enable IRL0-3 and mask using cpu intc controller */ + ctrl_outl(0x80000000, INTC_INTMSKCLR1); + register_intc_controller(&intc_irl3210_desc); + break; + default: + BUG(); + } +} diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7780.c b/arch/sh/kernel/cpu/sh4a/setup-sh7780.c index e8fd33ff0605..293004b526ff 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7780.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7780.c @@ -168,11 +168,6 @@ static struct intc_group groups[] __initdata = { INTC_GROUP(GPIO, GPIOI0, GPIOI1, GPIOI2, GPIOI3), }; -static struct intc_prio priorities[] __initdata = { - INTC_PRIO(SCIF0, 3), - INTC_PRIO(SCIF1, 3), -}; - static struct intc_mask_reg mask_registers[] __initdata = { { 0xffd40038, 0xffd4003c, 32, /* INT2MSKR / INT2MSKCR */ { 0, 0, 0, 0, 0, 0, GPIO, FLCTL, @@ -195,7 +190,7 @@ static struct intc_prio_reg prio_registers[] __initdata = { { 0xffd4001c, 0, 32, 8, /* INT2PRI7 */ { FLCTL, GPIO } }, }; -static DECLARE_INTC_DESC(intc_desc, "sh7780", vectors, groups, priorities, +static DECLARE_INTC_DESC(intc_desc, "sh7780", vectors, groups, mask_registers, prio_registers, NULL); /* Support for external interrupt pins in IRQ mode */ @@ -223,7 +218,7 @@ static struct intc_sense_reg irq_sense_registers[] __initdata = { }; static DECLARE_INTC_DESC(intc_irq_desc, "sh7780-irq", irq_vectors, - NULL, NULL, irq_mask_registers, irq_prio_registers, + NULL, irq_mask_registers, irq_prio_registers, irq_sense_registers); /* External interrupt pins in IRL mode */ @@ -257,10 +252,10 @@ static struct intc_mask_reg irl7654_mask_registers[] __initdata = { }; static DECLARE_INTC_DESC(intc_irl7654_desc, "sh7780-irl7654", irl_vectors, - NULL, NULL, irl7654_mask_registers, NULL, NULL); + NULL, irl7654_mask_registers, NULL, NULL); static DECLARE_INTC_DESC(intc_irl3210_desc, "sh7780-irl3210", irl_vectors, - NULL, NULL, irl3210_mask_registers, NULL, NULL); + NULL, irl3210_mask_registers, NULL, NULL); #define INTC_ICR0 0xffd00000 #define INTC_INTMSK0 0xffd00044 diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7785.c b/arch/sh/kernel/cpu/sh4a/setup-sh7785.c index 39b215d6cee5..74b60e96cdf4 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7785.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7785.c @@ -178,15 +178,6 @@ static struct intc_group groups[] __initdata = { INTC_GROUP(GPIO, GPIOI0, GPIOI1, GPIOI2, GPIOI3), }; -static struct intc_prio priorities[] __initdata = { - INTC_PRIO(SCIF0, 3), - INTC_PRIO(SCIF1, 3), - INTC_PRIO(SCIF2, 3), - INTC_PRIO(SCIF3, 3), - INTC_PRIO(SCIF4, 3), - INTC_PRIO(SCIF5, 3), -}; - static struct intc_mask_reg mask_registers[] __initdata = { { 0xffd00044, 0xffd00064, 32, /* INTMSK0 / INTMSKCLR0 */ { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } }, @@ -227,7 +218,7 @@ static struct intc_prio_reg prio_registers[] __initdata = { { 0xffd40024, 0, 32, 8, /* INT2PRI9 */ { DU, GDTA, } }, }; -static DECLARE_INTC_DESC(intc_desc, "sh7785", vectors, groups, priorities, +static DECLARE_INTC_DESC(intc_desc, "sh7785", vectors, groups, mask_registers, prio_registers, NULL); /* Support for external interrupt pins in IRQ mode */ @@ -248,11 +239,11 @@ static struct intc_sense_reg sense_registers[] __initdata = { }; static DECLARE_INTC_DESC(intc_desc_irq0123, "sh7785-irq0123", vectors_irq0123, - NULL, NULL, mask_registers, prio_registers, + NULL, mask_registers, prio_registers, sense_registers); static DECLARE_INTC_DESC(intc_desc_irq4567, "sh7785-irq4567", vectors_irq4567, - NULL, NULL, mask_registers, prio_registers, + NULL, mask_registers, prio_registers, sense_registers); /* External interrupt pins in IRL mode */ @@ -280,10 +271,10 @@ static struct intc_vect vectors_irl4567[] __initdata = { }; static DECLARE_INTC_DESC(intc_desc_irl0123, "sh7785-irl0123", vectors_irl0123, - NULL, NULL, mask_registers, NULL, NULL); + NULL, mask_registers, NULL, NULL); static DECLARE_INTC_DESC(intc_desc_irl4567, "sh7785-irl4567", vectors_irl4567, - NULL, NULL, mask_registers, NULL, NULL); + NULL, mask_registers, NULL, NULL); #define INTC_ICR0 0xffd00000 #define INTC_INTMSK0 0xffd00044 diff --git a/arch/sh/kernel/cpu/sh4a/setup-shx3.c b/arch/sh/kernel/cpu/sh4a/setup-shx3.c index c6cdd7e3b049..4dc958b6b314 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-shx3.c +++ b/arch/sh/kernel/cpu/sh4a/setup-shx3.c @@ -165,13 +165,6 @@ static struct intc_group groups[] __initdata = { INTC_GROUP(DTU3, DTU3_TEND, DTU3_AE, DTU3_TMISS), }; -static struct intc_prio priorities[] __initdata = { - INTC_PRIO(SCIF0, 3), - INTC_PRIO(SCIF1, 3), - INTC_PRIO(SCIF2, 3), - INTC_PRIO(SCIF3, 3), -}; - static struct intc_mask_reg mask_registers[] __initdata = { { 0xfe410030, 0xfe410050, 32, /* CnINTMSK0 / CnINTMSKCLR0 */ { IRQ0, IRQ1, IRQ2, IRQ3 } }, @@ -218,7 +211,7 @@ static struct intc_prio_reg prio_registers[] __initdata = { INTICI3, INTICI2, INTICI1, INTICI0 }, INTC_SMP(4, 4) }, }; -static DECLARE_INTC_DESC(intc_desc, "shx3", vectors, groups, priorities, +static DECLARE_INTC_DESC(intc_desc, "shx3", vectors, groups, mask_registers, prio_registers, NULL); /* Support for external interrupt pins in IRQ mode */ @@ -232,8 +225,7 @@ static struct intc_sense_reg sense_registers[] __initdata = { }; static DECLARE_INTC_DESC(intc_desc_irq, "shx3-irq", vectors_irq, groups, - priorities, mask_registers, prio_registers, - sense_registers); + mask_registers, prio_registers, sense_registers); /* External interrupt pins in IRL mode */ static struct intc_vect vectors_irl[] __initdata = { @@ -248,7 +240,7 @@ static struct intc_vect vectors_irl[] __initdata = { }; static DECLARE_INTC_DESC(intc_desc_irl, "shx3-irl", vectors_irl, groups, - priorities, mask_registers, prio_registers, NULL); + mask_registers, prio_registers, NULL); void __init plat_irq_setup_pins(int mode) { diff --git a/arch/sh/kernel/cpu/sh5/Makefile b/arch/sh/kernel/cpu/sh5/Makefile new file mode 100644 index 000000000000..8646363e9ded --- /dev/null +++ b/arch/sh/kernel/cpu/sh5/Makefile @@ -0,0 +1,7 @@ +# +# Makefile for the Linux/SuperH SH-5 backends. +# +obj-y := entry.o probe.o switchto.o + +obj-$(CONFIG_SH_FPU) += fpu.o +obj-$(CONFIG_KALLSYMS) += unwind.o diff --git a/arch/sh/kernel/cpu/sh5/entry.S b/arch/sh/kernel/cpu/sh5/entry.S new file mode 100644 index 000000000000..ba8750176d91 --- /dev/null +++ b/arch/sh/kernel/cpu/sh5/entry.S @@ -0,0 +1,2101 @@ +/* + * arch/sh/kernel/cpu/sh5/entry.S + * + * Copyright (C) 2000, 2001 Paolo Alberelli + * Copyright (C) 2004 - 2007 Paul Mundt + * Copyright (C) 2003, 2004 Richard Curnow + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/errno.h> +#include <linux/sys.h> +#include <asm/cpu/registers.h> +#include <asm/processor.h> +#include <asm/unistd.h> +#include <asm/thread_info.h> +#include <asm/asm-offsets.h> + +/* + * SR fields. + */ +#define SR_ASID_MASK 0x00ff0000 +#define SR_FD_MASK 0x00008000 +#define SR_SS 0x08000000 +#define SR_BL 0x10000000 +#define SR_MD 0x40000000 + +/* + * Event code. + */ +#define EVENT_INTERRUPT 0 +#define EVENT_FAULT_TLB 1 +#define EVENT_FAULT_NOT_TLB 2 +#define EVENT_DEBUG 3 + +/* EXPEVT values */ +#define RESET_CAUSE 0x20 +#define DEBUGSS_CAUSE 0x980 + +/* + * Frame layout. Quad index. + */ +#define FRAME_T(x) FRAME_TBASE+(x*8) +#define FRAME_R(x) FRAME_RBASE+(x*8) +#define FRAME_S(x) FRAME_SBASE+(x*8) +#define FSPC 0 +#define FSSR 1 +#define FSYSCALL_ID 2 + +/* Arrange the save frame to be a multiple of 32 bytes long */ +#define FRAME_SBASE 0 +#define FRAME_RBASE (FRAME_SBASE+(3*8)) /* SYSCALL_ID - SSR - SPC */ +#define FRAME_TBASE (FRAME_RBASE+(63*8)) /* r0 - r62 */ +#define FRAME_PBASE (FRAME_TBASE+(8*8)) /* tr0 -tr7 */ +#define FRAME_SIZE (FRAME_PBASE+(2*8)) /* pad0-pad1 */ + +#define FP_FRAME_SIZE FP_FRAME_BASE+(33*8) /* dr0 - dr31 + fpscr */ +#define FP_FRAME_BASE 0 + +#define SAVED_R2 0*8 +#define SAVED_R3 1*8 +#define SAVED_R4 2*8 +#define SAVED_R5 3*8 +#define SAVED_R18 4*8 +#define SAVED_R6 5*8 +#define SAVED_TR0 6*8 + +/* These are the registers saved in the TLB path that aren't saved in the first + level of the normal one. */ +#define TLB_SAVED_R25 7*8 +#define TLB_SAVED_TR1 8*8 +#define TLB_SAVED_TR2 9*8 +#define TLB_SAVED_TR3 10*8 +#define TLB_SAVED_TR4 11*8 +/* Save R0/R1 : PT-migrating compiler currently dishounours -ffixed-r0 and -ffixed-r1 causing + breakage otherwise. */ +#define TLB_SAVED_R0 12*8 +#define TLB_SAVED_R1 13*8 + +#define CLI() \ + getcon SR, r6; \ + ori r6, 0xf0, r6; \ + putcon r6, SR; + +#define STI() \ + getcon SR, r6; \ + andi r6, ~0xf0, r6; \ + putcon r6, SR; + +#ifdef CONFIG_PREEMPT +# define preempt_stop() CLI() +#else +# define preempt_stop() +# define resume_kernel restore_all +#endif + + .section .data, "aw" + +#define FAST_TLBMISS_STACK_CACHELINES 4 +#define FAST_TLBMISS_STACK_QUADWORDS (4*FAST_TLBMISS_STACK_CACHELINES) + +/* Register back-up area for all exceptions */ + .balign 32 + /* Allow for 16 quadwords to be pushed by fast tlbmiss handling + * register saves etc. */ + .fill FAST_TLBMISS_STACK_QUADWORDS, 8, 0x0 +/* This is 32 byte aligned by construction */ +/* Register back-up area for all exceptions */ +reg_save_area: + .quad 0 + .quad 0 + .quad 0 + .quad 0 + + .quad 0 + .quad 0 + .quad 0 + .quad 0 + + .quad 0 + .quad 0 + .quad 0 + .quad 0 + + .quad 0 + .quad 0 + +/* Save area for RESVEC exceptions. We cannot use reg_save_area because of + * reentrancy. Note this area may be accessed via physical address. + * Align so this fits a whole single cache line, for ease of purging. + */ + .balign 32,0,32 +resvec_save_area: + .quad 0 + .quad 0 + .quad 0 + .quad 0 + .quad 0 + .balign 32,0,32 + +/* Jump table of 3rd level handlers */ +trap_jtable: + .long do_exception_error /* 0x000 */ + .long do_exception_error /* 0x020 */ + .long tlb_miss_load /* 0x040 */ + .long tlb_miss_store /* 0x060 */ + ! ARTIFICIAL pseudo-EXPEVT setting + .long do_debug_interrupt /* 0x080 */ + .long tlb_miss_load /* 0x0A0 */ + .long tlb_miss_store /* 0x0C0 */ + .long do_address_error_load /* 0x0E0 */ + .long do_address_error_store /* 0x100 */ +#ifdef CONFIG_SH_FPU + .long do_fpu_error /* 0x120 */ +#else + .long do_exception_error /* 0x120 */ +#endif + .long do_exception_error /* 0x140 */ + .long system_call /* 0x160 */ + .long do_reserved_inst /* 0x180 */ + .long do_illegal_slot_inst /* 0x1A0 */ + .long do_exception_error /* 0x1C0 - NMI */ + .long do_exception_error /* 0x1E0 */ + .rept 15 + .long do_IRQ /* 0x200 - 0x3C0 */ + .endr + .long do_exception_error /* 0x3E0 */ + .rept 32 + .long do_IRQ /* 0x400 - 0x7E0 */ + .endr + .long fpu_error_or_IRQA /* 0x800 */ + .long fpu_error_or_IRQB /* 0x820 */ + .long do_IRQ /* 0x840 */ + .long do_IRQ /* 0x860 */ + .rept 6 + .long do_exception_error /* 0x880 - 0x920 */ + .endr + .long do_software_break_point /* 0x940 */ + .long do_exception_error /* 0x960 */ + .long do_single_step /* 0x980 */ + + .rept 3 + .long do_exception_error /* 0x9A0 - 0x9E0 */ + .endr + .long do_IRQ /* 0xA00 */ + .long do_IRQ /* 0xA20 */ + .long itlb_miss_or_IRQ /* 0xA40 */ + .long do_IRQ /* 0xA60 */ + .long do_IRQ /* 0xA80 */ + .long itlb_miss_or_IRQ /* 0xAA0 */ + .long do_exception_error /* 0xAC0 */ + .long do_address_error_exec /* 0xAE0 */ + .rept 8 + .long do_exception_error /* 0xB00 - 0xBE0 */ + .endr + .rept 18 + .long do_IRQ /* 0xC00 - 0xE20 */ + .endr + + .section .text64, "ax" + +/* + * --- Exception/Interrupt/Event Handling Section + */ + +/* + * VBR and RESVEC blocks. + * + * First level handler for VBR-based exceptions. + * + * To avoid waste of space, align to the maximum text block size. + * This is assumed to be at most 128 bytes or 32 instructions. + * DO NOT EXCEED 32 instructions on the first level handlers ! + * + * Also note that RESVEC is contained within the VBR block + * where the room left (1KB - TEXT_SIZE) allows placing + * the RESVEC block (at most 512B + TEXT_SIZE). + * + * So first (and only) level handler for RESVEC-based exceptions. + * + * Where the fault/interrupt is handled (not_a_tlb_miss, tlb_miss + * and interrupt) we are a lot tight with register space until + * saving onto the stack frame, which is done in handle_exception(). + * + */ + +#define TEXT_SIZE 128 +#define BLOCK_SIZE 1664 /* Dynamic check, 13*128 */ + + .balign TEXT_SIZE +LVBR_block: + .space 256, 0 /* Power-on class handler, */ + /* not required here */ +not_a_tlb_miss: + synco /* TAKum03020 (but probably a good idea anyway.) */ + /* Save original stack pointer into KCR1 */ + putcon SP, KCR1 + + /* Save other original registers into reg_save_area */ + movi reg_save_area, SP + st.q SP, SAVED_R2, r2 + st.q SP, SAVED_R3, r3 + st.q SP, SAVED_R4, r4 + st.q SP, SAVED_R5, r5 + st.q SP, SAVED_R6, r6 + st.q SP, SAVED_R18, r18 + gettr tr0, r3 + st.q SP, SAVED_TR0, r3 + + /* Set args for Non-debug, Not a TLB miss class handler */ + getcon EXPEVT, r2 + movi ret_from_exception, r3 + ori r3, 1, r3 + movi EVENT_FAULT_NOT_TLB, r4 + or SP, ZERO, r5 + getcon KCR1, SP + pta handle_exception, tr0 + blink tr0, ZERO + + .balign 256 + ! VBR+0x200 + nop + .balign 256 + ! VBR+0x300 + nop + .balign 256 + /* + * Instead of the natural .balign 1024 place RESVEC here + * respecting the final 1KB alignment. + */ + .balign TEXT_SIZE + /* + * Instead of '.space 1024-TEXT_SIZE' place the RESVEC + * block making sure the final alignment is correct. + */ +tlb_miss: + synco /* TAKum03020 (but probably a good idea anyway.) */ + putcon SP, KCR1 + movi reg_save_area, SP + /* SP is guaranteed 32-byte aligned. */ + st.q SP, TLB_SAVED_R0 , r0 + st.q SP, TLB_SAVED_R1 , r1 + st.q SP, SAVED_R2 , r2 + st.q SP, SAVED_R3 , r3 + st.q SP, SAVED_R4 , r4 + st.q SP, SAVED_R5 , r5 + st.q SP, SAVED_R6 , r6 + st.q SP, SAVED_R18, r18 + + /* Save R25 for safety; as/ld may want to use it to achieve the call to + * the code in mm/tlbmiss.c */ + st.q SP, TLB_SAVED_R25, r25 + gettr tr0, r2 + gettr tr1, r3 + gettr tr2, r4 + gettr tr3, r5 + gettr tr4, r18 + st.q SP, SAVED_TR0 , r2 + st.q SP, TLB_SAVED_TR1 , r3 + st.q SP, TLB_SAVED_TR2 , r4 + st.q SP, TLB_SAVED_TR3 , r5 + st.q SP, TLB_SAVED_TR4 , r18 + + pt do_fast_page_fault, tr0 + getcon SSR, r2 + getcon EXPEVT, r3 + getcon TEA, r4 + shlri r2, 30, r2 + andi r2, 1, r2 /* r2 = SSR.MD */ + blink tr0, LINK + + pt fixup_to_invoke_general_handler, tr1 + + /* If the fast path handler fixed the fault, just drop through quickly + to the restore code right away to return to the excepting context. + */ + beqi/u r2, 0, tr1 + +fast_tlb_miss_restore: + ld.q SP, SAVED_TR0, r2 + ld.q SP, TLB_SAVED_TR1, r3 + ld.q SP, TLB_SAVED_TR2, r4 + + ld.q SP, TLB_SAVED_TR3, r5 + ld.q SP, TLB_SAVED_TR4, r18 + + ptabs r2, tr0 + ptabs r3, tr1 + ptabs r4, tr2 + ptabs r5, tr3 + ptabs r18, tr4 + + ld.q SP, TLB_SAVED_R0, r0 + ld.q SP, TLB_SAVED_R1, r1 + ld.q SP, SAVED_R2, r2 + ld.q SP, SAVED_R3, r3 + ld.q SP, SAVED_R4, r4 + ld.q SP, SAVED_R5, r5 + ld.q SP, SAVED_R6, r6 + ld.q SP, SAVED_R18, r18 + ld.q SP, TLB_SAVED_R25, r25 + + getcon KCR1, SP + rte + nop /* for safety, in case the code is run on sh5-101 cut1.x */ + +fixup_to_invoke_general_handler: + + /* OK, new method. Restore stuff that's not expected to get saved into + the 'first-level' reg save area, then just fall through to setting + up the registers and calling the second-level handler. */ + + /* 2nd level expects r2,3,4,5,6,18,tr0 to be saved. So we must restore + r25,tr1-4 and save r6 to get into the right state. */ + + ld.q SP, TLB_SAVED_TR1, r3 + ld.q SP, TLB_SAVED_TR2, r4 + ld.q SP, TLB_SAVED_TR3, r5 + ld.q SP, TLB_SAVED_TR4, r18 + ld.q SP, TLB_SAVED_R25, r25 + + ld.q SP, TLB_SAVED_R0, r0 + ld.q SP, TLB_SAVED_R1, r1 + + ptabs/u r3, tr1 + ptabs/u r4, tr2 + ptabs/u r5, tr3 + ptabs/u r18, tr4 + + /* Set args for Non-debug, TLB miss class handler */ + getcon EXPEVT, r2 + movi ret_from_exception, r3 + ori r3, 1, r3 + movi EVENT_FAULT_TLB, r4 + or SP, ZERO, r5 + getcon KCR1, SP + pta handle_exception, tr0 + blink tr0, ZERO + +/* NB TAKE GREAT CARE HERE TO ENSURE THAT THE INTERRUPT CODE + DOES END UP AT VBR+0x600 */ + nop + nop + nop + nop + nop + nop + + .balign 256 + /* VBR + 0x600 */ + +interrupt: + synco /* TAKum03020 (but probably a good idea anyway.) */ + /* Save original stack pointer into KCR1 */ + putcon SP, KCR1 + + /* Save other original registers into reg_save_area */ + movi reg_save_area, SP + st.q SP, SAVED_R2, r2 + st.q SP, SAVED_R3, r3 + st.q SP, SAVED_R4, r4 + st.q SP, SAVED_R5, r5 + st.q SP, SAVED_R6, r6 + st.q SP, SAVED_R18, r18 + gettr tr0, r3 + st.q SP, SAVED_TR0, r3 + + /* Set args for interrupt class handler */ + getcon INTEVT, r2 + movi ret_from_irq, r3 + ori r3, 1, r3 + movi EVENT_INTERRUPT, r4 + or SP, ZERO, r5 + getcon KCR1, SP + pta handle_exception, tr0 + blink tr0, ZERO + .balign TEXT_SIZE /* let's waste the bare minimum */ + +LVBR_block_end: /* Marker. Used for total checking */ + + .balign 256 +LRESVEC_block: + /* Panic handler. Called with MMU off. Possible causes/actions: + * - Reset: Jump to program start. + * - Single Step: Turn off Single Step & return. + * - Others: Call panic handler, passing PC as arg. + * (this may need to be extended...) + */ +reset_or_panic: + synco /* TAKum03020 (but probably a good idea anyway.) */ + putcon SP, DCR + /* First save r0-1 and tr0, as we need to use these */ + movi resvec_save_area-CONFIG_PAGE_OFFSET, SP + st.q SP, 0, r0 + st.q SP, 8, r1 + gettr tr0, r0 + st.q SP, 32, r0 + + /* Check cause */ + getcon EXPEVT, r0 + movi RESET_CAUSE, r1 + sub r1, r0, r1 /* r1=0 if reset */ + movi _stext-CONFIG_PAGE_OFFSET, r0 + ori r0, 1, r0 + ptabs r0, tr0 + beqi r1, 0, tr0 /* Jump to start address if reset */ + + getcon EXPEVT, r0 + movi DEBUGSS_CAUSE, r1 + sub r1, r0, r1 /* r1=0 if single step */ + pta single_step_panic, tr0 + beqi r1, 0, tr0 /* jump if single step */ + + /* Now jump to where we save the registers. */ + movi panic_stash_regs-CONFIG_PAGE_OFFSET, r1 + ptabs r1, tr0 + blink tr0, r63 + +single_step_panic: + /* We are in a handler with Single Step set. We need to resume the + * handler, by turning on MMU & turning off Single Step. */ + getcon SSR, r0 + movi SR_MMU, r1 + or r0, r1, r0 + movi ~SR_SS, r1 + and r0, r1, r0 + putcon r0, SSR + /* Restore EXPEVT, as the rte won't do this */ + getcon PEXPEVT, r0 + putcon r0, EXPEVT + /* Restore regs */ + ld.q SP, 32, r0 + ptabs r0, tr0 + ld.q SP, 0, r0 + ld.q SP, 8, r1 + getcon DCR, SP + synco + rte + + + .balign 256 +debug_exception: + synco /* TAKum03020 (but probably a good idea anyway.) */ + /* + * Single step/software_break_point first level handler. + * Called with MMU off, so the first thing we do is enable it + * by doing an rte with appropriate SSR. + */ + putcon SP, DCR + /* Save SSR & SPC, together with R0 & R1, as we need to use 2 regs. */ + movi resvec_save_area-CONFIG_PAGE_OFFSET, SP + + /* With the MMU off, we are bypassing the cache, so purge any + * data that will be made stale by the following stores. + */ + ocbp SP, 0 + synco + + st.q SP, 0, r0 + st.q SP, 8, r1 + getcon SPC, r0 + st.q SP, 16, r0 + getcon SSR, r0 + st.q SP, 24, r0 + + /* Enable MMU, block exceptions, set priv mode, disable single step */ + movi SR_MMU | SR_BL | SR_MD, r1 + or r0, r1, r0 + movi ~SR_SS, r1 + and r0, r1, r0 + putcon r0, SSR + /* Force control to debug_exception_2 when rte is executed */ + movi debug_exeception_2, r0 + ori r0, 1, r0 /* force SHmedia, just in case */ + putcon r0, SPC + getcon DCR, SP + synco + rte +debug_exeception_2: + /* Restore saved regs */ + putcon SP, KCR1 + movi resvec_save_area, SP + ld.q SP, 24, r0 + putcon r0, SSR + ld.q SP, 16, r0 + putcon r0, SPC + ld.q SP, 0, r0 + ld.q SP, 8, r1 + + /* Save other original registers into reg_save_area */ + movi reg_save_area, SP + st.q SP, SAVED_R2, r2 + st.q SP, SAVED_R3, r3 + st.q SP, SAVED_R4, r4 + st.q SP, SAVED_R5, r5 + st.q SP, SAVED_R6, r6 + st.q SP, SAVED_R18, r18 + gettr tr0, r3 + st.q SP, SAVED_TR0, r3 + + /* Set args for debug class handler */ + getcon EXPEVT, r2 + movi ret_from_exception, r3 + ori r3, 1, r3 + movi EVENT_DEBUG, r4 + or SP, ZERO, r5 + getcon KCR1, SP + pta handle_exception, tr0 + blink tr0, ZERO + + .balign 256 +debug_interrupt: + /* !!! WE COME HERE IN REAL MODE !!! */ + /* Hook-up debug interrupt to allow various debugging options to be + * hooked into its handler. */ + /* Save original stack pointer into KCR1 */ + synco + putcon SP, KCR1 + movi resvec_save_area-CONFIG_PAGE_OFFSET, SP + ocbp SP, 0 + ocbp SP, 32 + synco + + /* Save other original registers into reg_save_area thru real addresses */ + st.q SP, SAVED_R2, r2 + st.q SP, SAVED_R3, r3 + st.q SP, SAVED_R4, r4 + st.q SP, SAVED_R5, r5 + st.q SP, SAVED_R6, r6 + st.q SP, SAVED_R18, r18 + gettr tr0, r3 + st.q SP, SAVED_TR0, r3 + + /* move (spc,ssr)->(pspc,pssr). The rte will shift + them back again, so that they look like the originals + as far as the real handler code is concerned. */ + getcon spc, r6 + putcon r6, pspc + getcon ssr, r6 + putcon r6, pssr + + ! construct useful SR for handle_exception + movi 3, r6 + shlli r6, 30, r6 + getcon sr, r18 + or r18, r6, r6 + putcon r6, ssr + + ! SSR is now the current SR with the MD and MMU bits set + ! i.e. the rte will switch back to priv mode and put + ! the mmu back on + + ! construct spc + movi handle_exception, r18 + ori r18, 1, r18 ! for safety (do we need this?) + putcon r18, spc + + /* Set args for Non-debug, Not a TLB miss class handler */ + + ! EXPEVT==0x80 is unused, so 'steal' this value to put the + ! debug interrupt handler in the vectoring table + movi 0x80, r2 + movi ret_from_exception, r3 + ori r3, 1, r3 + movi EVENT_FAULT_NOT_TLB, r4 + + or SP, ZERO, r5 + movi CONFIG_PAGE_OFFSET, r6 + add r6, r5, r5 + getcon KCR1, SP + + synco ! for safety + rte ! -> handle_exception, switch back to priv mode again + +LRESVEC_block_end: /* Marker. Unused. */ + + .balign TEXT_SIZE + +/* + * Second level handler for VBR-based exceptions. Pre-handler. + * In common to all stack-frame sensitive handlers. + * + * Inputs: + * (KCR0) Current [current task union] + * (KCR1) Original SP + * (r2) INTEVT/EXPEVT + * (r3) appropriate return address + * (r4) Event (0 = interrupt, 1 = TLB miss fault, 2 = Not TLB miss fault, 3=debug) + * (r5) Pointer to reg_save_area + * (SP) Original SP + * + * Available registers: + * (r6) + * (r18) + * (tr0) + * + */ +handle_exception: + /* Common 2nd level handler. */ + + /* First thing we need an appropriate stack pointer */ + getcon SSR, r6 + shlri r6, 30, r6 + andi r6, 1, r6 + pta stack_ok, tr0 + bne r6, ZERO, tr0 /* Original stack pointer is fine */ + + /* Set stack pointer for user fault */ + getcon KCR0, SP + movi THREAD_SIZE, r6 /* Point to the end */ + add SP, r6, SP + +stack_ok: + +/* DEBUG : check for underflow/overflow of the kernel stack */ + pta no_underflow, tr0 + getcon KCR0, r6 + movi 1024, r18 + add r6, r18, r6 + bge SP, r6, tr0 ! ? below 1k from bottom of stack : danger zone + +/* Just panic to cause a crash. */ +bad_sp: + ld.b r63, 0, r6 + nop + +no_underflow: + pta bad_sp, tr0 + getcon kcr0, r6 + movi THREAD_SIZE, r18 + add r18, r6, r6 + bgt SP, r6, tr0 ! sp above the stack + + /* Make some room for the BASIC frame. */ + movi -(FRAME_SIZE), r6 + add SP, r6, SP + +/* Could do this with no stalling if we had another spare register, but the + code below will be OK. */ + ld.q r5, SAVED_R2, r6 + ld.q r5, SAVED_R3, r18 + st.q SP, FRAME_R(2), r6 + ld.q r5, SAVED_R4, r6 + st.q SP, FRAME_R(3), r18 + ld.q r5, SAVED_R5, r18 + st.q SP, FRAME_R(4), r6 + ld.q r5, SAVED_R6, r6 + st.q SP, FRAME_R(5), r18 + ld.q r5, SAVED_R18, r18 + st.q SP, FRAME_R(6), r6 + ld.q r5, SAVED_TR0, r6 + st.q SP, FRAME_R(18), r18 + st.q SP, FRAME_T(0), r6 + + /* Keep old SP around */ + getcon KCR1, r6 + + /* Save the rest of the general purpose registers */ + st.q SP, FRAME_R(0), r0 + st.q SP, FRAME_R(1), r1 + st.q SP, FRAME_R(7), r7 + st.q SP, FRAME_R(8), r8 + st.q SP, FRAME_R(9), r9 + st.q SP, FRAME_R(10), r10 + st.q SP, FRAME_R(11), r11 + st.q SP, FRAME_R(12), r12 + st.q SP, FRAME_R(13), r13 + st.q SP, FRAME_R(14), r14 + + /* SP is somewhere else */ + st.q SP, FRAME_R(15), r6 + + st.q SP, FRAME_R(16), r16 + st.q SP, FRAME_R(17), r17 + /* r18 is saved earlier. */ + st.q SP, FRAME_R(19), r19 + st.q SP, FRAME_R(20), r20 + st.q SP, FRAME_R(21), r21 + st.q SP, FRAME_R(22), r22 + st.q SP, FRAME_R(23), r23 + st.q SP, FRAME_R(24), r24 + st.q SP, FRAME_R(25), r25 + st.q SP, FRAME_R(26), r26 + st.q SP, FRAME_R(27), r27 + st.q SP, FRAME_R(28), r28 + st.q SP, FRAME_R(29), r29 + st.q SP, FRAME_R(30), r30 + st.q SP, FRAME_R(31), r31 + st.q SP, FRAME_R(32), r32 + st.q SP, FRAME_R(33), r33 + st.q SP, FRAME_R(34), r34 + st.q SP, FRAME_R(35), r35 + st.q SP, FRAME_R(36), r36 + st.q SP, FRAME_R(37), r37 + st.q SP, FRAME_R(38), r38 + st.q SP, FRAME_R(39), r39 + st.q SP, FRAME_R(40), r40 + st.q SP, FRAME_R(41), r41 + st.q SP, FRAME_R(42), r42 + st.q SP, FRAME_R(43), r43 + st.q SP, FRAME_R(44), r44 + st.q SP, FRAME_R(45), r45 + st.q SP, FRAME_R(46), r46 + st.q SP, FRAME_R(47), r47 + st.q SP, FRAME_R(48), r48 + st.q SP, FRAME_R(49), r49 + st.q SP, FRAME_R(50), r50 + st.q SP, FRAME_R(51), r51 + st.q SP, FRAME_R(52), r52 + st.q SP, FRAME_R(53), r53 + st.q SP, FRAME_R(54), r54 + st.q SP, FRAME_R(55), r55 + st.q SP, FRAME_R(56), r56 + st.q SP, FRAME_R(57), r57 + st.q SP, FRAME_R(58), r58 + st.q SP, FRAME_R(59), r59 + st.q SP, FRAME_R(60), r60 + st.q SP, FRAME_R(61), r61 + st.q SP, FRAME_R(62), r62 + + /* + * Save the S* registers. + */ + getcon SSR, r61 + st.q SP, FRAME_S(FSSR), r61 + getcon SPC, r62 + st.q SP, FRAME_S(FSPC), r62 + movi -1, r62 /* Reset syscall_nr */ + st.q SP, FRAME_S(FSYSCALL_ID), r62 + + /* Save the rest of the target registers */ + gettr tr1, r6 + st.q SP, FRAME_T(1), r6 + gettr tr2, r6 + st.q SP, FRAME_T(2), r6 + gettr tr3, r6 + st.q SP, FRAME_T(3), r6 + gettr tr4, r6 + st.q SP, FRAME_T(4), r6 + gettr tr5, r6 + st.q SP, FRAME_T(5), r6 + gettr tr6, r6 + st.q SP, FRAME_T(6), r6 + gettr tr7, r6 + st.q SP, FRAME_T(7), r6 + + ! setup FP so that unwinder can wind back through nested kernel mode + ! exceptions + add SP, ZERO, r14 + +#ifdef CONFIG_POOR_MANS_STRACE + /* We've pushed all the registers now, so only r2-r4 hold anything + * useful. Move them into callee save registers */ + or r2, ZERO, r28 + or r3, ZERO, r29 + or r4, ZERO, r30 + + /* Preserve r2 as the event code */ + movi evt_debug, r3 + ori r3, 1, r3 + ptabs r3, tr0 + + or SP, ZERO, r6 + getcon TRA, r5 + blink tr0, LINK + + or r28, ZERO, r2 + or r29, ZERO, r3 + or r30, ZERO, r4 +#endif + + /* For syscall and debug race condition, get TRA now */ + getcon TRA, r5 + + /* We are in a safe position to turn SR.BL off, but set IMASK=0xf + * Also set FD, to catch FPU usage in the kernel. + * + * benedict.gaster@superh.com 29/07/2002 + * + * On all SH5-101 revisions it is unsafe to raise the IMASK and at the + * same time change BL from 1->0, as any pending interrupt of a level + * higher than he previous value of IMASK will leak through and be + * taken unexpectedly. + * + * To avoid this we raise the IMASK and then issue another PUTCON to + * enable interrupts. + */ + getcon SR, r6 + movi SR_IMASK | SR_FD, r7 + or r6, r7, r6 + putcon r6, SR + movi SR_UNBLOCK_EXC, r7 + and r6, r7, r6 + putcon r6, SR + + + /* Now call the appropriate 3rd level handler */ + or r3, ZERO, LINK + movi trap_jtable, r3 + shlri r2, 3, r2 + ldx.l r2, r3, r3 + shlri r2, 2, r2 + ptabs r3, tr0 + or SP, ZERO, r3 + blink tr0, ZERO + +/* + * Second level handler for VBR-based exceptions. Post-handlers. + * + * Post-handlers for interrupts (ret_from_irq), exceptions + * (ret_from_exception) and common reentrance doors (restore_all + * to get back to the original context, ret_from_syscall loop to + * check kernel exiting). + * + * ret_with_reschedule and work_notifysig are an inner lables of + * the ret_from_syscall loop. + * + * In common to all stack-frame sensitive handlers. + * + * Inputs: + * (SP) struct pt_regs *, original register's frame pointer (basic) + * + */ + .global ret_from_irq +ret_from_irq: +#ifdef CONFIG_POOR_MANS_STRACE + pta evt_debug_ret_from_irq, tr0 + ori SP, 0, r2 + blink tr0, LINK +#endif + ld.q SP, FRAME_S(FSSR), r6 + shlri r6, 30, r6 + andi r6, 1, r6 + pta resume_kernel, tr0 + bne r6, ZERO, tr0 /* no further checks */ + STI() + pta ret_with_reschedule, tr0 + blink tr0, ZERO /* Do not check softirqs */ + + .global ret_from_exception +ret_from_exception: + preempt_stop() + +#ifdef CONFIG_POOR_MANS_STRACE + pta evt_debug_ret_from_exc, tr0 + ori SP, 0, r2 + blink tr0, LINK +#endif + + ld.q SP, FRAME_S(FSSR), r6 + shlri r6, 30, r6 + andi r6, 1, r6 + pta resume_kernel, tr0 + bne r6, ZERO, tr0 /* no further checks */ + + /* Check softirqs */ + +#ifdef CONFIG_PREEMPT + pta ret_from_syscall, tr0 + blink tr0, ZERO + +resume_kernel: + pta restore_all, tr0 + + getcon KCR0, r6 + ld.l r6, TI_PRE_COUNT, r7 + beq/u r7, ZERO, tr0 + +need_resched: + ld.l r6, TI_FLAGS, r7 + movi (1 << TIF_NEED_RESCHED), r8 + and r8, r7, r8 + bne r8, ZERO, tr0 + + getcon SR, r7 + andi r7, 0xf0, r7 + bne r7, ZERO, tr0 + + movi ((PREEMPT_ACTIVE >> 16) & 65535), r8 + shori (PREEMPT_ACTIVE & 65535), r8 + st.l r6, TI_PRE_COUNT, r8 + + STI() + movi schedule, r7 + ori r7, 1, r7 + ptabs r7, tr1 + blink tr1, LINK + + st.l r6, TI_PRE_COUNT, ZERO + CLI() + + pta need_resched, tr1 + blink tr1, ZERO +#endif + + .global ret_from_syscall +ret_from_syscall: + +ret_with_reschedule: + getcon KCR0, r6 ! r6 contains current_thread_info + ld.l r6, TI_FLAGS, r7 ! r7 contains current_thread_info->flags + + movi _TIF_NEED_RESCHED, r8 + and r8, r7, r8 + pta work_resched, tr0 + bne r8, ZERO, tr0 + + pta restore_all, tr1 + + movi (_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK), r8 + and r8, r7, r8 + pta work_notifysig, tr0 + bne r8, ZERO, tr0 + + blink tr1, ZERO + +work_resched: + pta ret_from_syscall, tr0 + gettr tr0, LINK + movi schedule, r6 + ptabs r6, tr0 + blink tr0, ZERO /* Call schedule(), return on top */ + +work_notifysig: + gettr tr1, LINK + + movi do_signal, r6 + ptabs r6, tr0 + or SP, ZERO, r2 + or ZERO, ZERO, r3 + blink tr0, LINK /* Call do_signal(regs, 0), return here */ + +restore_all: + /* Do prefetches */ + + ld.q SP, FRAME_T(0), r6 + ld.q SP, FRAME_T(1), r7 + ld.q SP, FRAME_T(2), r8 + ld.q SP, FRAME_T(3), r9 + ptabs r6, tr0 + ptabs r7, tr1 + ptabs r8, tr2 + ptabs r9, tr3 + ld.q SP, FRAME_T(4), r6 + ld.q SP, FRAME_T(5), r7 + ld.q SP, FRAME_T(6), r8 + ld.q SP, FRAME_T(7), r9 + ptabs r6, tr4 + ptabs r7, tr5 + ptabs r8, tr6 + ptabs r9, tr7 + + ld.q SP, FRAME_R(0), r0 + ld.q SP, FRAME_R(1), r1 + ld.q SP, FRAME_R(2), r2 + ld.q SP, FRAME_R(3), r3 + ld.q SP, FRAME_R(4), r4 + ld.q SP, FRAME_R(5), r5 + ld.q SP, FRAME_R(6), r6 + ld.q SP, FRAME_R(7), r7 + ld.q SP, FRAME_R(8), r8 + ld.q SP, FRAME_R(9), r9 + ld.q SP, FRAME_R(10), r10 + ld.q SP, FRAME_R(11), r11 + ld.q SP, FRAME_R(12), r12 + ld.q SP, FRAME_R(13), r13 + ld.q SP, FRAME_R(14), r14 + + ld.q SP, FRAME_R(16), r16 + ld.q SP, FRAME_R(17), r17 + ld.q SP, FRAME_R(18), r18 + ld.q SP, FRAME_R(19), r19 + ld.q SP, FRAME_R(20), r20 + ld.q SP, FRAME_R(21), r21 + ld.q SP, FRAME_R(22), r22 + ld.q SP, FRAME_R(23), r23 + ld.q SP, FRAME_R(24), r24 + ld.q SP, FRAME_R(25), r25 + ld.q SP, FRAME_R(26), r26 + ld.q SP, FRAME_R(27), r27 + ld.q SP, FRAME_R(28), r28 + ld.q SP, FRAME_R(29), r29 + ld.q SP, FRAME_R(30), r30 + ld.q SP, FRAME_R(31), r31 + ld.q SP, FRAME_R(32), r32 + ld.q SP, FRAME_R(33), r33 + ld.q SP, FRAME_R(34), r34 + ld.q SP, FRAME_R(35), r35 + ld.q SP, FRAME_R(36), r36 + ld.q SP, FRAME_R(37), r37 + ld.q SP, FRAME_R(38), r38 + ld.q SP, FRAME_R(39), r39 + ld.q SP, FRAME_R(40), r40 + ld.q SP, FRAME_R(41), r41 + ld.q SP, FRAME_R(42), r42 + ld.q SP, FRAME_R(43), r43 + ld.q SP, FRAME_R(44), r44 + ld.q SP, FRAME_R(45), r45 + ld.q SP, FRAME_R(46), r46 + ld.q SP, FRAME_R(47), r47 + ld.q SP, FRAME_R(48), r48 + ld.q SP, FRAME_R(49), r49 + ld.q SP, FRAME_R(50), r50 + ld.q SP, FRAME_R(51), r51 + ld.q SP, FRAME_R(52), r52 + ld.q SP, FRAME_R(53), r53 + ld.q SP, FRAME_R(54), r54 + ld.q SP, FRAME_R(55), r55 + ld.q SP, FRAME_R(56), r56 + ld.q SP, FRAME_R(57), r57 + ld.q SP, FRAME_R(58), r58 + + getcon SR, r59 + movi SR_BLOCK_EXC, r60 + or r59, r60, r59 + putcon r59, SR /* SR.BL = 1, keep nesting out */ + ld.q SP, FRAME_S(FSSR), r61 + ld.q SP, FRAME_S(FSPC), r62 + movi SR_ASID_MASK, r60 + and r59, r60, r59 + andc r61, r60, r61 /* Clear out older ASID */ + or r59, r61, r61 /* Retain current ASID */ + putcon r61, SSR + putcon r62, SPC + + /* Ignore FSYSCALL_ID */ + + ld.q SP, FRAME_R(59), r59 + ld.q SP, FRAME_R(60), r60 + ld.q SP, FRAME_R(61), r61 + ld.q SP, FRAME_R(62), r62 + + /* Last touch */ + ld.q SP, FRAME_R(15), SP + rte + nop + +/* + * Third level handlers for VBR-based exceptions. Adapting args to + * and/or deflecting to fourth level handlers. + * + * Fourth level handlers interface. + * Most are C-coded handlers directly pointed by the trap_jtable. + * (Third = Fourth level) + * Inputs: + * (r2) fault/interrupt code, entry number (e.g. NMI = 14, + * IRL0-3 (0000) = 16, RTLBMISS = 2, SYSCALL = 11, etc ...) + * (r3) struct pt_regs *, original register's frame pointer + * (r4) Event (0 = interrupt, 1 = TLB miss fault, 2 = Not TLB miss fault) + * (r5) TRA control register (for syscall/debug benefit only) + * (LINK) return address + * (SP) = r3 + * + * Kernel TLB fault handlers will get a slightly different interface. + * (r2) struct pt_regs *, original register's frame pointer + * (r3) writeaccess, whether it's a store fault as opposed to load fault + * (r4) execaccess, whether it's a ITLB fault as opposed to DTLB fault + * (r5) Effective Address of fault + * (LINK) return address + * (SP) = r2 + * + * fpu_error_or_IRQ? is a helper to deflect to the right cause. + * + */ +tlb_miss_load: + or SP, ZERO, r2 + or ZERO, ZERO, r3 /* Read */ + or ZERO, ZERO, r4 /* Data */ + getcon TEA, r5 + pta call_do_page_fault, tr0 + beq ZERO, ZERO, tr0 + +tlb_miss_store: + or SP, ZERO, r2 + movi 1, r3 /* Write */ + or ZERO, ZERO, r4 /* Data */ + getcon TEA, r5 + pta call_do_page_fault, tr0 + beq ZERO, ZERO, tr0 + +itlb_miss_or_IRQ: + pta its_IRQ, tr0 + beqi/u r4, EVENT_INTERRUPT, tr0 + or SP, ZERO, r2 + or ZERO, ZERO, r3 /* Read */ + movi 1, r4 /* Text */ + getcon TEA, r5 + /* Fall through */ + +call_do_page_fault: + movi do_page_fault, r6 + ptabs r6, tr0 + blink tr0, ZERO + +fpu_error_or_IRQA: + pta its_IRQ, tr0 + beqi/l r4, EVENT_INTERRUPT, tr0 +#ifdef CONFIG_SH_FPU + movi do_fpu_state_restore, r6 +#else + movi do_exception_error, r6 +#endif + ptabs r6, tr0 + blink tr0, ZERO + +fpu_error_or_IRQB: + pta its_IRQ, tr0 + beqi/l r4, EVENT_INTERRUPT, tr0 +#ifdef CONFIG_SH_FPU + movi do_fpu_state_restore, r6 +#else + movi do_exception_error, r6 +#endif + ptabs r6, tr0 + blink tr0, ZERO + +its_IRQ: + movi do_IRQ, r6 + ptabs r6, tr0 + blink tr0, ZERO + +/* + * system_call/unknown_trap third level handler: + * + * Inputs: + * (r2) fault/interrupt code, entry number (TRAP = 11) + * (r3) struct pt_regs *, original register's frame pointer + * (r4) Not used. Event (0=interrupt, 1=TLB miss fault, 2=Not TLB miss fault) + * (r5) TRA Control Reg (0x00xyzzzz: x=1 SYSCALL, y = #args, z=nr) + * (SP) = r3 + * (LINK) return address: ret_from_exception + * (*r3) Syscall parms: SC#, arg0, arg1, ..., arg5 in order (Saved r2/r7) + * + * Outputs: + * (*r3) Syscall reply (Saved r2) + * (LINK) In case of syscall only it can be scrapped. + * Common second level post handler will be ret_from_syscall. + * Common (non-trace) exit point to that is syscall_ret (saving + * result to r2). Common bad exit point is syscall_bad (returning + * ENOSYS then saved to r2). + * + */ + +unknown_trap: + /* Unknown Trap or User Trace */ + movi do_unknown_trapa, r6 + ptabs r6, tr0 + ld.q r3, FRAME_R(9), r2 /* r2 = #arg << 16 | syscall # */ + andi r2, 0x1ff, r2 /* r2 = syscall # */ + blink tr0, LINK + + pta syscall_ret, tr0 + blink tr0, ZERO + + /* New syscall implementation*/ +system_call: + pta unknown_trap, tr0 + or r5, ZERO, r4 /* TRA (=r5) -> r4 */ + shlri r4, 20, r4 + bnei r4, 1, tr0 /* unknown_trap if not 0x1yzzzz */ + + /* It's a system call */ + st.q r3, FRAME_S(FSYSCALL_ID), r5 /* ID (0x1yzzzz) -> stack */ + andi r5, 0x1ff, r5 /* syscall # -> r5 */ + + STI() + + pta syscall_allowed, tr0 + movi NR_syscalls - 1, r4 /* Last valid */ + bgeu/l r4, r5, tr0 + +syscall_bad: + /* Return ENOSYS ! */ + movi -(ENOSYS), r2 /* Fall-through */ + + .global syscall_ret +syscall_ret: + st.q SP, FRAME_R(9), r2 /* Expecting SP back to BASIC frame */ + +#ifdef CONFIG_POOR_MANS_STRACE + /* nothing useful in registers at this point */ + + movi evt_debug2, r5 + ori r5, 1, r5 + ptabs r5, tr0 + ld.q SP, FRAME_R(9), r2 + or SP, ZERO, r3 + blink tr0, LINK +#endif + + ld.q SP, FRAME_S(FSPC), r2 + addi r2, 4, r2 /* Move PC, being pre-execution event */ + st.q SP, FRAME_S(FSPC), r2 + pta ret_from_syscall, tr0 + blink tr0, ZERO + + +/* A different return path for ret_from_fork, because we now need + * to call schedule_tail with the later kernels. Because prev is + * loaded into r2 by switch_to() means we can just call it straight away + */ + +.global ret_from_fork +ret_from_fork: + + movi schedule_tail,r5 + ori r5, 1, r5 + ptabs r5, tr0 + blink tr0, LINK + +#ifdef CONFIG_POOR_MANS_STRACE + /* nothing useful in registers at this point */ + + movi evt_debug2, r5 + ori r5, 1, r5 + ptabs r5, tr0 + ld.q SP, FRAME_R(9), r2 + or SP, ZERO, r3 + blink tr0, LINK +#endif + + ld.q SP, FRAME_S(FSPC), r2 + addi r2, 4, r2 /* Move PC, being pre-execution event */ + st.q SP, FRAME_S(FSPC), r2 + pta ret_from_syscall, tr0 + blink tr0, ZERO + + + +syscall_allowed: + /* Use LINK to deflect the exit point, default is syscall_ret */ + pta syscall_ret, tr0 + gettr tr0, LINK + pta syscall_notrace, tr0 + + getcon KCR0, r2 + ld.l r2, TI_FLAGS, r4 + movi (_TIF_SYSCALL_TRACE | _TIF_SINGLESTEP | _TIF_SYSCALL_AUDIT), r6 + and r6, r4, r6 + beq/l r6, ZERO, tr0 + + /* Trace it by calling syscall_trace before and after */ + movi syscall_trace, r4 + or SP, ZERO, r2 + or ZERO, ZERO, r3 + ptabs r4, tr0 + blink tr0, LINK + + /* Reload syscall number as r5 is trashed by syscall_trace */ + ld.q SP, FRAME_S(FSYSCALL_ID), r5 + andi r5, 0x1ff, r5 + + pta syscall_ret_trace, tr0 + gettr tr0, LINK + +syscall_notrace: + /* Now point to the appropriate 4th level syscall handler */ + movi sys_call_table, r4 + shlli r5, 2, r5 + ldx.l r4, r5, r5 + ptabs r5, tr0 + + /* Prepare original args */ + ld.q SP, FRAME_R(2), r2 + ld.q SP, FRAME_R(3), r3 + ld.q SP, FRAME_R(4), r4 + ld.q SP, FRAME_R(5), r5 + ld.q SP, FRAME_R(6), r6 + ld.q SP, FRAME_R(7), r7 + + /* And now the trick for those syscalls requiring regs * ! */ + or SP, ZERO, r8 + + /* Call it */ + blink tr0, ZERO /* LINK is already properly set */ + +syscall_ret_trace: + /* We get back here only if under trace */ + st.q SP, FRAME_R(9), r2 /* Save return value */ + + movi syscall_trace, LINK + or SP, ZERO, r2 + movi 1, r3 + ptabs LINK, tr0 + blink tr0, LINK + + /* This needs to be done after any syscall tracing */ + ld.q SP, FRAME_S(FSPC), r2 + addi r2, 4, r2 /* Move PC, being pre-execution event */ + st.q SP, FRAME_S(FSPC), r2 + + pta ret_from_syscall, tr0 + blink tr0, ZERO /* Resume normal return sequence */ + +/* + * --- Switch to running under a particular ASID and return the previous ASID value + * --- The caller is assumed to have done a cli before calling this. + * + * Input r2 : new ASID + * Output r2 : old ASID + */ + + .global switch_and_save_asid +switch_and_save_asid: + getcon sr, r0 + movi 255, r4 + shlli r4, 16, r4 /* r4 = mask to select ASID */ + and r0, r4, r3 /* r3 = shifted old ASID */ + andi r2, 255, r2 /* mask down new ASID */ + shlli r2, 16, r2 /* align new ASID against SR.ASID */ + andc r0, r4, r0 /* efface old ASID from SR */ + or r0, r2, r0 /* insert the new ASID */ + putcon r0, ssr + movi 1f, r0 + putcon r0, spc + rte + nop +1: + ptabs LINK, tr0 + shlri r3, 16, r2 /* r2 = old ASID */ + blink tr0, r63 + + .global route_to_panic_handler +route_to_panic_handler: + /* Switch to real mode, goto panic_handler, don't return. Useful for + last-chance debugging, e.g. if no output wants to go to the console. + */ + + movi panic_handler - CONFIG_PAGE_OFFSET, r1 + ptabs r1, tr0 + pta 1f, tr1 + gettr tr1, r0 + putcon r0, spc + getcon sr, r0 + movi 1, r1 + shlli r1, 31, r1 + andc r0, r1, r0 + putcon r0, ssr + rte + nop +1: /* Now in real mode */ + blink tr0, r63 + nop + + .global peek_real_address_q +peek_real_address_q: + /* Two args: + r2 : real mode address to peek + r2(out) : result quadword + + This is provided as a cheapskate way of manipulating device + registers for debugging (to avoid the need to onchip_remap the debug + module, and to avoid the need to onchip_remap the watchpoint + controller in a way that identity maps sufficient bits to avoid the + SH5-101 cut2 silicon defect). + + This code is not performance critical + */ + + add.l r2, r63, r2 /* sign extend address */ + getcon sr, r0 /* r0 = saved original SR */ + movi 1, r1 + shlli r1, 28, r1 + or r0, r1, r1 /* r0 with block bit set */ + putcon r1, sr /* now in critical section */ + movi 1, r36 + shlli r36, 31, r36 + andc r1, r36, r1 /* turn sr.mmu off in real mode section */ + + putcon r1, ssr + movi .peek0 - CONFIG_PAGE_OFFSET, r36 /* real mode target address */ + movi 1f, r37 /* virtual mode return addr */ + putcon r36, spc + + synco + rte + nop + +.peek0: /* come here in real mode, don't touch caches!! + still in critical section (sr.bl==1) */ + putcon r0, ssr + putcon r37, spc + /* Here's the actual peek. If the address is bad, all bets are now off + * what will happen (handlers invoked in real-mode = bad news) */ + ld.q r2, 0, r2 + synco + rte /* Back to virtual mode */ + nop + +1: + ptabs LINK, tr0 + blink tr0, r63 + + .global poke_real_address_q +poke_real_address_q: + /* Two args: + r2 : real mode address to poke + r3 : quadword value to write. + + This is provided as a cheapskate way of manipulating device + registers for debugging (to avoid the need to onchip_remap the debug + module, and to avoid the need to onchip_remap the watchpoint + controller in a way that identity maps sufficient bits to avoid the + SH5-101 cut2 silicon defect). + + This code is not performance critical + */ + + add.l r2, r63, r2 /* sign extend address */ + getcon sr, r0 /* r0 = saved original SR */ + movi 1, r1 + shlli r1, 28, r1 + or r0, r1, r1 /* r0 with block bit set */ + putcon r1, sr /* now in critical section */ + movi 1, r36 + shlli r36, 31, r36 + andc r1, r36, r1 /* turn sr.mmu off in real mode section */ + + putcon r1, ssr + movi .poke0-CONFIG_PAGE_OFFSET, r36 /* real mode target address */ + movi 1f, r37 /* virtual mode return addr */ + putcon r36, spc + + synco + rte + nop + +.poke0: /* come here in real mode, don't touch caches!! + still in critical section (sr.bl==1) */ + putcon r0, ssr + putcon r37, spc + /* Here's the actual poke. If the address is bad, all bets are now off + * what will happen (handlers invoked in real-mode = bad news) */ + st.q r2, 0, r3 + synco + rte /* Back to virtual mode */ + nop + +1: + ptabs LINK, tr0 + blink tr0, r63 + +/* + * --- User Access Handling Section + */ + +/* + * User Access support. It all moved to non inlined Assembler + * functions in here. + * + * __kernel_size_t __copy_user(void *__to, const void *__from, + * __kernel_size_t __n) + * + * Inputs: + * (r2) target address + * (r3) source address + * (r4) size in bytes + * + * Ouputs: + * (*r2) target data + * (r2) non-copied bytes + * + * If a fault occurs on the user pointer, bail out early and return the + * number of bytes not copied in r2. + * Strategy : for large blocks, call a real memcpy function which can + * move >1 byte at a time using unaligned ld/st instructions, and can + * manipulate the cache using prefetch + alloco to improve the speed + * further. If a fault occurs in that function, just revert to the + * byte-by-byte approach used for small blocks; this is rare so the + * performance hit for that case does not matter. + * + * For small blocks it's not worth the overhead of setting up and calling + * the memcpy routine; do the copy a byte at a time. + * + */ + .global __copy_user +__copy_user: + pta __copy_user_byte_by_byte, tr1 + movi 16, r0 ! this value is a best guess, should tune it by benchmarking + bge/u r0, r4, tr1 + pta copy_user_memcpy, tr0 + addi SP, -32, SP + /* Save arguments in case we have to fix-up unhandled page fault */ + st.q SP, 0, r2 + st.q SP, 8, r3 + st.q SP, 16, r4 + st.q SP, 24, r35 ! r35 is callee-save + /* Save LINK in a register to reduce RTS time later (otherwise + ld SP,*,LINK;ptabs LINK;trn;blink trn,r63 becomes a critical path) */ + ori LINK, 0, r35 + blink tr0, LINK + + /* Copy completed normally if we get back here */ + ptabs r35, tr0 + ld.q SP, 24, r35 + /* don't restore r2-r4, pointless */ + /* set result=r2 to zero as the copy must have succeeded. */ + or r63, r63, r2 + addi SP, 32, SP + blink tr0, r63 ! RTS + + .global __copy_user_fixup +__copy_user_fixup: + /* Restore stack frame */ + ori r35, 0, LINK + ld.q SP, 24, r35 + ld.q SP, 16, r4 + ld.q SP, 8, r3 + ld.q SP, 0, r2 + addi SP, 32, SP + /* Fall through to original code, in the 'same' state we entered with */ + +/* The slow byte-by-byte method is used if the fast copy traps due to a bad + user address. In that rare case, the speed drop can be tolerated. */ +__copy_user_byte_by_byte: + pta ___copy_user_exit, tr1 + pta ___copy_user1, tr0 + beq/u r4, r63, tr1 /* early exit for zero length copy */ + sub r2, r3, r0 + addi r0, -1, r0 + +___copy_user1: + ld.b r3, 0, r5 /* Fault address 1 */ + + /* Could rewrite this to use just 1 add, but the second comes 'free' + due to load latency */ + addi r3, 1, r3 + addi r4, -1, r4 /* No real fixup required */ +___copy_user2: + stx.b r3, r0, r5 /* Fault address 2 */ + bne r4, ZERO, tr0 + +___copy_user_exit: + or r4, ZERO, r2 + ptabs LINK, tr0 + blink tr0, ZERO + +/* + * __kernel_size_t __clear_user(void *addr, __kernel_size_t size) + * + * Inputs: + * (r2) target address + * (r3) size in bytes + * + * Ouputs: + * (*r2) zero-ed target data + * (r2) non-zero-ed bytes + */ + .global __clear_user +__clear_user: + pta ___clear_user_exit, tr1 + pta ___clear_user1, tr0 + beq/u r3, r63, tr1 + +___clear_user1: + st.b r2, 0, ZERO /* Fault address */ + addi r2, 1, r2 + addi r3, -1, r3 /* No real fixup required */ + bne r3, ZERO, tr0 + +___clear_user_exit: + or r3, ZERO, r2 + ptabs LINK, tr0 + blink tr0, ZERO + + +/* + * int __strncpy_from_user(unsigned long __dest, unsigned long __src, + * int __count) + * + * Inputs: + * (r2) target address + * (r3) source address + * (r4) maximum size in bytes + * + * Ouputs: + * (*r2) copied data + * (r2) -EFAULT (in case of faulting) + * copied data (otherwise) + */ + .global __strncpy_from_user +__strncpy_from_user: + pta ___strncpy_from_user1, tr0 + pta ___strncpy_from_user_done, tr1 + or r4, ZERO, r5 /* r5 = original count */ + beq/u r4, r63, tr1 /* early exit if r4==0 */ + movi -(EFAULT), r6 /* r6 = reply, no real fixup */ + or ZERO, ZERO, r7 /* r7 = data, clear top byte of data */ + +___strncpy_from_user1: + ld.b r3, 0, r7 /* Fault address: only in reading */ + st.b r2, 0, r7 + addi r2, 1, r2 + addi r3, 1, r3 + beq/u ZERO, r7, tr1 + addi r4, -1, r4 /* return real number of copied bytes */ + bne/l ZERO, r4, tr0 + +___strncpy_from_user_done: + sub r5, r4, r6 /* If done, return copied */ + +___strncpy_from_user_exit: + or r6, ZERO, r2 + ptabs LINK, tr0 + blink tr0, ZERO + +/* + * extern long __strnlen_user(const char *__s, long __n) + * + * Inputs: + * (r2) source address + * (r3) source size in bytes + * + * Ouputs: + * (r2) -EFAULT (in case of faulting) + * string length (otherwise) + */ + .global __strnlen_user +__strnlen_user: + pta ___strnlen_user_set_reply, tr0 + pta ___strnlen_user1, tr1 + or ZERO, ZERO, r5 /* r5 = counter */ + movi -(EFAULT), r6 /* r6 = reply, no real fixup */ + or ZERO, ZERO, r7 /* r7 = data, clear top byte of data */ + beq r3, ZERO, tr0 + +___strnlen_user1: + ldx.b r2, r5, r7 /* Fault address: only in reading */ + addi r3, -1, r3 /* No real fixup */ + addi r5, 1, r5 + beq r3, ZERO, tr0 + bne r7, ZERO, tr1 +! The line below used to be active. This meant led to a junk byte lying between each pair +! of entries in the argv & envp structures in memory. Whilst the program saw the right data +! via the argv and envp arguments to main, it meant the 'flat' representation visible through +! /proc/$pid/cmdline was corrupt, causing trouble with ps, for example. +! addi r5, 1, r5 /* Include '\0' */ + +___strnlen_user_set_reply: + or r5, ZERO, r6 /* If done, return counter */ + +___strnlen_user_exit: + or r6, ZERO, r2 + ptabs LINK, tr0 + blink tr0, ZERO + +/* + * extern long __get_user_asm_?(void *val, long addr) + * + * Inputs: + * (r2) dest address + * (r3) source address (in User Space) + * + * Ouputs: + * (r2) -EFAULT (faulting) + * 0 (not faulting) + */ + .global __get_user_asm_b +__get_user_asm_b: + or r2, ZERO, r4 + movi -(EFAULT), r2 /* r2 = reply, no real fixup */ + +___get_user_asm_b1: + ld.b r3, 0, r5 /* r5 = data */ + st.b r4, 0, r5 + or ZERO, ZERO, r2 + +___get_user_asm_b_exit: + ptabs LINK, tr0 + blink tr0, ZERO + + + .global __get_user_asm_w +__get_user_asm_w: + or r2, ZERO, r4 + movi -(EFAULT), r2 /* r2 = reply, no real fixup */ + +___get_user_asm_w1: + ld.w r3, 0, r5 /* r5 = data */ + st.w r4, 0, r5 + or ZERO, ZERO, r2 + +___get_user_asm_w_exit: + ptabs LINK, tr0 + blink tr0, ZERO + + + .global __get_user_asm_l +__get_user_asm_l: + or r2, ZERO, r4 + movi -(EFAULT), r2 /* r2 = reply, no real fixup */ + +___get_user_asm_l1: + ld.l r3, 0, r5 /* r5 = data */ + st.l r4, 0, r5 + or ZERO, ZERO, r2 + +___get_user_asm_l_exit: + ptabs LINK, tr0 + blink tr0, ZERO + + + .global __get_user_asm_q +__get_user_asm_q: + or r2, ZERO, r4 + movi -(EFAULT), r2 /* r2 = reply, no real fixup */ + +___get_user_asm_q1: + ld.q r3, 0, r5 /* r5 = data */ + st.q r4, 0, r5 + or ZERO, ZERO, r2 + +___get_user_asm_q_exit: + ptabs LINK, tr0 + blink tr0, ZERO + +/* + * extern long __put_user_asm_?(void *pval, long addr) + * + * Inputs: + * (r2) kernel pointer to value + * (r3) dest address (in User Space) + * + * Ouputs: + * (r2) -EFAULT (faulting) + * 0 (not faulting) + */ + .global __put_user_asm_b +__put_user_asm_b: + ld.b r2, 0, r4 /* r4 = data */ + movi -(EFAULT), r2 /* r2 = reply, no real fixup */ + +___put_user_asm_b1: + st.b r3, 0, r4 + or ZERO, ZERO, r2 + +___put_user_asm_b_exit: + ptabs LINK, tr0 + blink tr0, ZERO + + + .global __put_user_asm_w +__put_user_asm_w: + ld.w r2, 0, r4 /* r4 = data */ + movi -(EFAULT), r2 /* r2 = reply, no real fixup */ + +___put_user_asm_w1: + st.w r3, 0, r4 + or ZERO, ZERO, r2 + +___put_user_asm_w_exit: + ptabs LINK, tr0 + blink tr0, ZERO + + + .global __put_user_asm_l +__put_user_asm_l: + ld.l r2, 0, r4 /* r4 = data */ + movi -(EFAULT), r2 /* r2 = reply, no real fixup */ + +___put_user_asm_l1: + st.l r3, 0, r4 + or ZERO, ZERO, r2 + +___put_user_asm_l_exit: + ptabs LINK, tr0 + blink tr0, ZERO + + + .global __put_user_asm_q +__put_user_asm_q: + ld.q r2, 0, r4 /* r4 = data */ + movi -(EFAULT), r2 /* r2 = reply, no real fixup */ + +___put_user_asm_q1: + st.q r3, 0, r4 + or ZERO, ZERO, r2 + +___put_user_asm_q_exit: + ptabs LINK, tr0 + blink tr0, ZERO + +panic_stash_regs: + /* The idea is : when we get an unhandled panic, we dump the registers + to a known memory location, the just sit in a tight loop. + This allows the human to look at the memory region through the GDB + session (assuming the debug module's SHwy initiator isn't locked up + or anything), to hopefully analyze the cause of the panic. */ + + /* On entry, former r15 (SP) is in DCR + former r0 is at resvec_saved_area + 0 + former r1 is at resvec_saved_area + 8 + former tr0 is at resvec_saved_area + 32 + DCR is the only register whose value is lost altogether. + */ + + movi 0xffffffff80000000, r0 ! phy of dump area + ld.q SP, 0x000, r1 ! former r0 + st.q r0, 0x000, r1 + ld.q SP, 0x008, r1 ! former r1 + st.q r0, 0x008, r1 + st.q r0, 0x010, r2 + st.q r0, 0x018, r3 + st.q r0, 0x020, r4 + st.q r0, 0x028, r5 + st.q r0, 0x030, r6 + st.q r0, 0x038, r7 + st.q r0, 0x040, r8 + st.q r0, 0x048, r9 + st.q r0, 0x050, r10 + st.q r0, 0x058, r11 + st.q r0, 0x060, r12 + st.q r0, 0x068, r13 + st.q r0, 0x070, r14 + getcon dcr, r14 + st.q r0, 0x078, r14 + st.q r0, 0x080, r16 + st.q r0, 0x088, r17 + st.q r0, 0x090, r18 + st.q r0, 0x098, r19 + st.q r0, 0x0a0, r20 + st.q r0, 0x0a8, r21 + st.q r0, 0x0b0, r22 + st.q r0, 0x0b8, r23 + st.q r0, 0x0c0, r24 + st.q r0, 0x0c8, r25 + st.q r0, 0x0d0, r26 + st.q r0, 0x0d8, r27 + st.q r0, 0x0e0, r28 + st.q r0, 0x0e8, r29 + st.q r0, 0x0f0, r30 + st.q r0, 0x0f8, r31 + st.q r0, 0x100, r32 + st.q r0, 0x108, r33 + st.q r0, 0x110, r34 + st.q r0, 0x118, r35 + st.q r0, 0x120, r36 + st.q r0, 0x128, r37 + st.q r0, 0x130, r38 + st.q r0, 0x138, r39 + st.q r0, 0x140, r40 + st.q r0, 0x148, r41 + st.q r0, 0x150, r42 + st.q r0, 0x158, r43 + st.q r0, 0x160, r44 + st.q r0, 0x168, r45 + st.q r0, 0x170, r46 + st.q r0, 0x178, r47 + st.q r0, 0x180, r48 + st.q r0, 0x188, r49 + st.q r0, 0x190, r50 + st.q r0, 0x198, r51 + st.q r0, 0x1a0, r52 + st.q r0, 0x1a8, r53 + st.q r0, 0x1b0, r54 + st.q r0, 0x1b8, r55 + st.q r0, 0x1c0, r56 + st.q r0, 0x1c8, r57 + st.q r0, 0x1d0, r58 + st.q r0, 0x1d8, r59 + st.q r0, 0x1e0, r60 + st.q r0, 0x1e8, r61 + st.q r0, 0x1f0, r62 + st.q r0, 0x1f8, r63 ! bogus, but for consistency's sake... + + ld.q SP, 0x020, r1 ! former tr0 + st.q r0, 0x200, r1 + gettr tr1, r1 + st.q r0, 0x208, r1 + gettr tr2, r1 + st.q r0, 0x210, r1 + gettr tr3, r1 + st.q r0, 0x218, r1 + gettr tr4, r1 + st.q r0, 0x220, r1 + gettr tr5, r1 + st.q r0, 0x228, r1 + gettr tr6, r1 + st.q r0, 0x230, r1 + gettr tr7, r1 + st.q r0, 0x238, r1 + + getcon sr, r1 + getcon ssr, r2 + getcon pssr, r3 + getcon spc, r4 + getcon pspc, r5 + getcon intevt, r6 + getcon expevt, r7 + getcon pexpevt, r8 + getcon tra, r9 + getcon tea, r10 + getcon kcr0, r11 + getcon kcr1, r12 + getcon vbr, r13 + getcon resvec, r14 + + st.q r0, 0x240, r1 + st.q r0, 0x248, r2 + st.q r0, 0x250, r3 + st.q r0, 0x258, r4 + st.q r0, 0x260, r5 + st.q r0, 0x268, r6 + st.q r0, 0x270, r7 + st.q r0, 0x278, r8 + st.q r0, 0x280, r9 + st.q r0, 0x288, r10 + st.q r0, 0x290, r11 + st.q r0, 0x298, r12 + st.q r0, 0x2a0, r13 + st.q r0, 0x2a8, r14 + + getcon SPC,r2 + getcon SSR,r3 + getcon EXPEVT,r4 + /* Prepare to jump to C - physical address */ + movi panic_handler-CONFIG_PAGE_OFFSET, r1 + ori r1, 1, r1 + ptabs r1, tr0 + getcon DCR, SP + blink tr0, ZERO + nop + nop + nop + nop + + + + +/* + * --- Signal Handling Section + */ + +/* + * extern long long _sa_default_rt_restorer + * extern long long _sa_default_restorer + * + * or, better, + * + * extern void _sa_default_rt_restorer(void) + * extern void _sa_default_restorer(void) + * + * Code prototypes to do a sys_rt_sigreturn() or sys_sysreturn() + * from user space. Copied into user space by signal management. + * Both must be quad aligned and 2 quad long (4 instructions). + * + */ + .balign 8 + .global sa_default_rt_restorer +sa_default_rt_restorer: + movi 0x10, r9 + shori __NR_rt_sigreturn, r9 + trapa r9 + nop + + .balign 8 + .global sa_default_restorer +sa_default_restorer: + movi 0x10, r9 + shori __NR_sigreturn, r9 + trapa r9 + nop + +/* + * --- __ex_table Section + */ + +/* + * User Access Exception Table. + */ + .section __ex_table, "a" + + .global asm_uaccess_start /* Just a marker */ +asm_uaccess_start: + + .long ___copy_user1, ___copy_user_exit + .long ___copy_user2, ___copy_user_exit + .long ___clear_user1, ___clear_user_exit + .long ___strncpy_from_user1, ___strncpy_from_user_exit + .long ___strnlen_user1, ___strnlen_user_exit + .long ___get_user_asm_b1, ___get_user_asm_b_exit + .long ___get_user_asm_w1, ___get_user_asm_w_exit + .long ___get_user_asm_l1, ___get_user_asm_l_exit + .long ___get_user_asm_q1, ___get_user_asm_q_exit + .long ___put_user_asm_b1, ___put_user_asm_b_exit + .long ___put_user_asm_w1, ___put_user_asm_w_exit + .long ___put_user_asm_l1, ___put_user_asm_l_exit + .long ___put_user_asm_q1, ___put_user_asm_q_exit + + .global asm_uaccess_end /* Just a marker */ +asm_uaccess_end: + + + + +/* + * --- .text.init Section + */ + + .section .text.init, "ax" + +/* + * void trap_init (void) + * + */ + .global trap_init +trap_init: + addi SP, -24, SP /* Room to save r28/r29/r30 */ + st.q SP, 0, r28 + st.q SP, 8, r29 + st.q SP, 16, r30 + + /* Set VBR and RESVEC */ + movi LVBR_block, r19 + andi r19, -4, r19 /* reset MMUOFF + reserved */ + /* For RESVEC exceptions we force the MMU off, which means we need the + physical address. */ + movi LRESVEC_block-CONFIG_PAGE_OFFSET, r20 + andi r20, -4, r20 /* reset reserved */ + ori r20, 1, r20 /* set MMUOFF */ + putcon r19, VBR + putcon r20, RESVEC + + /* Sanity check */ + movi LVBR_block_end, r21 + andi r21, -4, r21 + movi BLOCK_SIZE, r29 /* r29 = expected size */ + or r19, ZERO, r30 + add r19, r29, r19 + + /* + * Ugly, but better loop forever now than crash afterwards. + * We should print a message, but if we touch LVBR or + * LRESVEC blocks we should not be surprised if we get stuck + * in trap_init(). + */ + pta trap_init_loop, tr1 + gettr tr1, r28 /* r28 = trap_init_loop */ + sub r21, r30, r30 /* r30 = actual size */ + + /* + * VBR/RESVEC handlers overlap by being bigger than + * allowed. Very bad. Just loop forever. + * (r28) panic/loop address + * (r29) expected size + * (r30) actual size + */ +trap_init_loop: + bne r19, r21, tr1 + + /* Now that exception vectors are set up reset SR.BL */ + getcon SR, r22 + movi SR_UNBLOCK_EXC, r23 + and r22, r23, r22 + putcon r22, SR + + addi SP, 24, SP + ptabs LINK, tr0 + blink tr0, ZERO + diff --git a/arch/sh/kernel/cpu/sh5/fpu.c b/arch/sh/kernel/cpu/sh5/fpu.c new file mode 100644 index 000000000000..30b76a94abf2 --- /dev/null +++ b/arch/sh/kernel/cpu/sh5/fpu.c @@ -0,0 +1,166 @@ +/* + * arch/sh/kernel/cpu/sh5/fpu.c + * + * Copyright (C) 2001 Manuela Cirronis, Paolo Alberelli + * Copyright (C) 2002 STMicroelectronics Limited + * Author : Stuart Menefy + * + * Started from SH4 version: + * Copyright (C) 1999, 2000 Kaz Kojima & Niibe Yutaka + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/sched.h> +#include <linux/signal.h> +#include <asm/processor.h> +#include <asm/user.h> +#include <asm/io.h> + +/* + * Initially load the FPU with signalling NANS. This bit pattern + * has the property that no matter whether considered as single or as + * double precision, it still represents a signalling NAN. + */ +#define sNAN64 0xFFFFFFFFFFFFFFFFULL +#define sNAN32 0xFFFFFFFFUL + +static union sh_fpu_union init_fpuregs = { + .hard = { + .fp_regs = { [0 ... 63] = sNAN32 }, + .fpscr = FPSCR_INIT + } +}; + +void save_fpu(struct task_struct *tsk, struct pt_regs *regs) +{ + asm volatile("fst.p %0, (0*8), fp0\n\t" + "fst.p %0, (1*8), fp2\n\t" + "fst.p %0, (2*8), fp4\n\t" + "fst.p %0, (3*8), fp6\n\t" + "fst.p %0, (4*8), fp8\n\t" + "fst.p %0, (5*8), fp10\n\t" + "fst.p %0, (6*8), fp12\n\t" + "fst.p %0, (7*8), fp14\n\t" + "fst.p %0, (8*8), fp16\n\t" + "fst.p %0, (9*8), fp18\n\t" + "fst.p %0, (10*8), fp20\n\t" + "fst.p %0, (11*8), fp22\n\t" + "fst.p %0, (12*8), fp24\n\t" + "fst.p %0, (13*8), fp26\n\t" + "fst.p %0, (14*8), fp28\n\t" + "fst.p %0, (15*8), fp30\n\t" + "fst.p %0, (16*8), fp32\n\t" + "fst.p %0, (17*8), fp34\n\t" + "fst.p %0, (18*8), fp36\n\t" + "fst.p %0, (19*8), fp38\n\t" + "fst.p %0, (20*8), fp40\n\t" + "fst.p %0, (21*8), fp42\n\t" + "fst.p %0, (22*8), fp44\n\t" + "fst.p %0, (23*8), fp46\n\t" + "fst.p %0, (24*8), fp48\n\t" + "fst.p %0, (25*8), fp50\n\t" + "fst.p %0, (26*8), fp52\n\t" + "fst.p %0, (27*8), fp54\n\t" + "fst.p %0, (28*8), fp56\n\t" + "fst.p %0, (29*8), fp58\n\t" + "fst.p %0, (30*8), fp60\n\t" + "fst.p %0, (31*8), fp62\n\t" + + "fgetscr fr63\n\t" + "fst.s %0, (32*8), fr63\n\t" + : /* no output */ + : "r" (&tsk->thread.fpu.hard) + : "memory"); +} + +static inline void +fpload(struct sh_fpu_hard_struct *fpregs) +{ + asm volatile("fld.p %0, (0*8), fp0\n\t" + "fld.p %0, (1*8), fp2\n\t" + "fld.p %0, (2*8), fp4\n\t" + "fld.p %0, (3*8), fp6\n\t" + "fld.p %0, (4*8), fp8\n\t" + "fld.p %0, (5*8), fp10\n\t" + "fld.p %0, (6*8), fp12\n\t" + "fld.p %0, (7*8), fp14\n\t" + "fld.p %0, (8*8), fp16\n\t" + "fld.p %0, (9*8), fp18\n\t" + "fld.p %0, (10*8), fp20\n\t" + "fld.p %0, (11*8), fp22\n\t" + "fld.p %0, (12*8), fp24\n\t" + "fld.p %0, (13*8), fp26\n\t" + "fld.p %0, (14*8), fp28\n\t" + "fld.p %0, (15*8), fp30\n\t" + "fld.p %0, (16*8), fp32\n\t" + "fld.p %0, (17*8), fp34\n\t" + "fld.p %0, (18*8), fp36\n\t" + "fld.p %0, (19*8), fp38\n\t" + "fld.p %0, (20*8), fp40\n\t" + "fld.p %0, (21*8), fp42\n\t" + "fld.p %0, (22*8), fp44\n\t" + "fld.p %0, (23*8), fp46\n\t" + "fld.p %0, (24*8), fp48\n\t" + "fld.p %0, (25*8), fp50\n\t" + "fld.p %0, (26*8), fp52\n\t" + "fld.p %0, (27*8), fp54\n\t" + "fld.p %0, (28*8), fp56\n\t" + "fld.p %0, (29*8), fp58\n\t" + "fld.p %0, (30*8), fp60\n\t" + + "fld.s %0, (32*8), fr63\n\t" + "fputscr fr63\n\t" + + "fld.p %0, (31*8), fp62\n\t" + : /* no output */ + : "r" (fpregs) ); +} + +void fpinit(struct sh_fpu_hard_struct *fpregs) +{ + *fpregs = init_fpuregs.hard; +} + +asmlinkage void +do_fpu_error(unsigned long ex, struct pt_regs *regs) +{ + struct task_struct *tsk = current; + + regs->pc += 4; + + tsk->thread.trap_no = 11; + tsk->thread.error_code = 0; + force_sig(SIGFPE, tsk); +} + + +asmlinkage void +do_fpu_state_restore(unsigned long ex, struct pt_regs *regs) +{ + void die(const char *str, struct pt_regs *regs, long err); + + if (! user_mode(regs)) + die("FPU used in kernel", regs, ex); + + regs->sr &= ~SR_FD; + + if (last_task_used_math == current) + return; + + enable_fpu(); + if (last_task_used_math != NULL) + /* Other processes fpu state, save away */ + save_fpu(last_task_used_math, regs); + + last_task_used_math = current; + if (used_math()) { + fpload(¤t->thread.fpu.hard); + } else { + /* First time FPU user. */ + fpload(&init_fpuregs.hard); + set_used_math(); + } + disable_fpu(); +} diff --git a/arch/sh/kernel/cpu/sh5/probe.c b/arch/sh/kernel/cpu/sh5/probe.c new file mode 100644 index 000000000000..15d167fd0ae7 --- /dev/null +++ b/arch/sh/kernel/cpu/sh5/probe.c @@ -0,0 +1,76 @@ +/* + * arch/sh/kernel/cpu/sh5/probe.c + * + * CPU Subtype Probing for SH-5. + * + * Copyright (C) 2000, 2001 Paolo Alberelli + * Copyright (C) 2003 - 2007 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/init.h> +#include <linux/io.h> +#include <linux/string.h> +#include <asm/processor.h> +#include <asm/cache.h> + +int __init detect_cpu_and_cache_system(void) +{ + unsigned long long cir; + + /* Do peeks in real mode to avoid having to set up a mapping for the + WPC registers. On SH5-101 cut2, such a mapping would be exposed to + an address translation erratum which would make it hard to set up + correctly. */ + cir = peek_real_address_q(0x0d000008); + if ((cir & 0xffff) == 0x5103) { + boot_cpu_data.type = CPU_SH5_103; + } else if (((cir >> 32) & 0xffff) == 0x51e2) { + /* CPU.VCR aliased at CIR address on SH5-101 */ + boot_cpu_data.type = CPU_SH5_101; + } else { + boot_cpu_data.type = CPU_SH_NONE; + } + + /* + * First, setup some sane values for the I-cache. + */ + boot_cpu_data.icache.ways = 4; + boot_cpu_data.icache.sets = 256; + boot_cpu_data.icache.linesz = L1_CACHE_BYTES; + +#if 0 + /* + * FIXME: This can probably be cleaned up a bit as well.. for example, + * do we really need the way shift _and_ the way_step_shift ?? Judging + * by the existing code, I would guess no.. is there any valid reason + * why we need to be tracking this around? + */ + boot_cpu_data.icache.way_shift = 13; + boot_cpu_data.icache.entry_shift = 5; + boot_cpu_data.icache.set_shift = 4; + boot_cpu_data.icache.way_step_shift = 16; + boot_cpu_data.icache.asid_shift = 2; + + /* + * way offset = cache size / associativity, so just don't factor in + * associativity in the first place.. + */ + boot_cpu_data.icache.way_ofs = boot_cpu_data.icache.sets * + boot_cpu_data.icache.linesz; + + boot_cpu_data.icache.asid_mask = 0x3fc; + boot_cpu_data.icache.idx_mask = 0x1fe0; + boot_cpu_data.icache.epn_mask = 0xffffe000; +#endif + + boot_cpu_data.icache.flags = 0; + + /* A trivial starting point.. */ + memcpy(&boot_cpu_data.dcache, + &boot_cpu_data.icache, sizeof(struct cache_info)); + + return 0; +} diff --git a/arch/sh/kernel/cpu/sh5/switchto.S b/arch/sh/kernel/cpu/sh5/switchto.S new file mode 100644 index 000000000000..45c351b0f1ba --- /dev/null +++ b/arch/sh/kernel/cpu/sh5/switchto.S @@ -0,0 +1,198 @@ +/* + * arch/sh/kernel/cpu/sh5/switchto.S + * + * sh64 context switch + * + * Copyright (C) 2004 Richard Curnow + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. +*/ + + .section .text..SHmedia32,"ax" + .little + + .balign 32 + + .type sh64_switch_to,@function + .global sh64_switch_to + .global __sh64_switch_to_end +sh64_switch_to: + +/* Incoming args + r2 - prev + r3 - &prev->thread + r4 - next + r5 - &next->thread + + Outgoing results + r2 - last (=prev) : this just stays in r2 throughout + + Want to create a full (struct pt_regs) on the stack to allow backtracing + functions to work. However, we only need to populate the callee-save + register slots in this structure; since we're a function our ancestors must + have themselves preserved all caller saved state in the stack. This saves + some wasted effort since we won't need to look at the values. + + In particular, all caller-save registers are immediately available for + scratch use. + +*/ + +#define FRAME_SIZE (76*8 + 8) + + movi FRAME_SIZE, r0 + sub.l r15, r0, r15 + ! Do normal-style register save to support backtrace + + st.l r15, 0, r18 ! save link reg + st.l r15, 4, r14 ! save fp + add.l r15, r63, r14 ! setup frame pointer + + ! hopefully this looks normal to the backtrace now. + + addi.l r15, 8, r1 ! base of pt_regs + addi.l r1, 24, r0 ! base of pt_regs.regs + addi.l r0, (63*8), r8 ! base of pt_regs.trregs + + /* Note : to be fixed? + struct pt_regs is really designed for holding the state on entry + to an exception, i.e. pc,sr,regs etc. However, for the context + switch state, some of this is not required. But the unwinder takes + struct pt_regs * as an arg so we have to build this structure + to allow unwinding switched tasks in show_state() */ + + st.q r0, ( 9*8), r9 + st.q r0, (10*8), r10 + st.q r0, (11*8), r11 + st.q r0, (12*8), r12 + st.q r0, (13*8), r13 + st.q r0, (14*8), r14 ! for unwind, want to look as though we took a trap at + ! the point where the process is left in suspended animation, i.e. current + ! fp here, not the saved one. + st.q r0, (16*8), r16 + + st.q r0, (24*8), r24 + st.q r0, (25*8), r25 + st.q r0, (26*8), r26 + st.q r0, (27*8), r27 + st.q r0, (28*8), r28 + st.q r0, (29*8), r29 + st.q r0, (30*8), r30 + st.q r0, (31*8), r31 + st.q r0, (32*8), r32 + st.q r0, (33*8), r33 + st.q r0, (34*8), r34 + st.q r0, (35*8), r35 + + st.q r0, (44*8), r44 + st.q r0, (45*8), r45 + st.q r0, (46*8), r46 + st.q r0, (47*8), r47 + st.q r0, (48*8), r48 + st.q r0, (49*8), r49 + st.q r0, (50*8), r50 + st.q r0, (51*8), r51 + st.q r0, (52*8), r52 + st.q r0, (53*8), r53 + st.q r0, (54*8), r54 + st.q r0, (55*8), r55 + st.q r0, (56*8), r56 + st.q r0, (57*8), r57 + st.q r0, (58*8), r58 + st.q r0, (59*8), r59 + + ! do this early as pta->gettr has no pipeline forwarding (=> 5 cycle latency) + ! Use a local label to avoid creating a symbol that will confuse the ! + ! backtrace + pta .Lsave_pc, tr0 + + gettr tr5, r45 + gettr tr6, r46 + gettr tr7, r47 + st.q r8, (5*8), r45 + st.q r8, (6*8), r46 + st.q r8, (7*8), r47 + + ! Now switch context + gettr tr0, r9 + st.l r3, 0, r15 ! prev->thread.sp + st.l r3, 8, r1 ! prev->thread.kregs + st.l r3, 4, r9 ! prev->thread.pc + st.q r1, 0, r9 ! save prev->thread.pc into pt_regs->pc + + ! Load PC for next task (init value or save_pc later) + ld.l r5, 4, r18 ! next->thread.pc + ! Switch stacks + ld.l r5, 0, r15 ! next->thread.sp + ptabs r18, tr0 + + ! Update current + ld.l r4, 4, r9 ! next->thread_info (2nd element of next task_struct) + putcon r9, kcr0 ! current = next->thread_info + + ! go to save_pc for a reschedule, or the initial thread.pc for a new process + blink tr0, r63 + + ! Restore (when we come back to a previously saved task) +.Lsave_pc: + addi.l r15, 32, r0 ! r0 = next's regs + addi.l r0, (63*8), r8 ! r8 = next's tr_regs + + ld.q r8, (5*8), r45 + ld.q r8, (6*8), r46 + ld.q r8, (7*8), r47 + ptabs r45, tr5 + ptabs r46, tr6 + ptabs r47, tr7 + + ld.q r0, ( 9*8), r9 + ld.q r0, (10*8), r10 + ld.q r0, (11*8), r11 + ld.q r0, (12*8), r12 + ld.q r0, (13*8), r13 + ld.q r0, (14*8), r14 + ld.q r0, (16*8), r16 + + ld.q r0, (24*8), r24 + ld.q r0, (25*8), r25 + ld.q r0, (26*8), r26 + ld.q r0, (27*8), r27 + ld.q r0, (28*8), r28 + ld.q r0, (29*8), r29 + ld.q r0, (30*8), r30 + ld.q r0, (31*8), r31 + ld.q r0, (32*8), r32 + ld.q r0, (33*8), r33 + ld.q r0, (34*8), r34 + ld.q r0, (35*8), r35 + + ld.q r0, (44*8), r44 + ld.q r0, (45*8), r45 + ld.q r0, (46*8), r46 + ld.q r0, (47*8), r47 + ld.q r0, (48*8), r48 + ld.q r0, (49*8), r49 + ld.q r0, (50*8), r50 + ld.q r0, (51*8), r51 + ld.q r0, (52*8), r52 + ld.q r0, (53*8), r53 + ld.q r0, (54*8), r54 + ld.q r0, (55*8), r55 + ld.q r0, (56*8), r56 + ld.q r0, (57*8), r57 + ld.q r0, (58*8), r58 + ld.q r0, (59*8), r59 + + ! epilogue + ld.l r15, 0, r18 + ld.l r15, 4, r14 + ptabs r18, tr0 + movi FRAME_SIZE, r0 + add r15, r0, r15 + blink tr0, r63 +__sh64_switch_to_end: +.LFE1: + .size sh64_switch_to,.LFE1-sh64_switch_to + diff --git a/arch/sh/kernel/cpu/sh5/unwind.c b/arch/sh/kernel/cpu/sh5/unwind.c new file mode 100644 index 000000000000..119c20afd4e5 --- /dev/null +++ b/arch/sh/kernel/cpu/sh5/unwind.c @@ -0,0 +1,326 @@ +/* + * arch/sh/kernel/cpu/sh5/unwind.c + * + * Copyright (C) 2004 Paul Mundt + * Copyright (C) 2004 Richard Curnow + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/kallsyms.h> +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/errno.h> +#include <asm/page.h> +#include <asm/ptrace.h> +#include <asm/processor.h> +#include <asm/io.h> + +static u8 regcache[63]; + +/* + * Finding the previous stack frame isn't horribly straightforward as it is + * on some other platforms. In the sh64 case, we don't have "linked" stack + * frames, so we need to do a bit of work to determine the previous frame, + * and in turn, the previous r14/r18 pair. + * + * There are generally a few cases which determine where we can find out + * the r14/r18 values. In the general case, this can be determined by poking + * around the prologue of the symbol PC is in (note that we absolutely must + * have frame pointer support as well as the kernel symbol table mapped, + * otherwise we can't even get this far). + * + * In other cases, such as the interrupt/exception path, we can poke around + * the sp/fp. + * + * Notably, this entire approach is somewhat error prone, and in the event + * that the previous frame cannot be determined, that's all we can do. + * Either way, this still leaves us with a more correct backtrace then what + * we would be able to come up with by walking the stack (which is garbage + * for anything beyond the first frame). + * -- PFM. + */ +static int lookup_prev_stack_frame(unsigned long fp, unsigned long pc, + unsigned long *pprev_fp, unsigned long *pprev_pc, + struct pt_regs *regs) +{ + const char *sym; + char namebuf[128]; + unsigned long offset; + unsigned long prologue = 0; + unsigned long fp_displacement = 0; + unsigned long fp_prev = 0; + unsigned long offset_r14 = 0, offset_r18 = 0; + int i, found_prologue_end = 0; + + sym = kallsyms_lookup(pc, NULL, &offset, NULL, namebuf); + if (!sym) + return -EINVAL; + + prologue = pc - offset; + if (!prologue) + return -EINVAL; + + /* Validate fp, to avoid risk of dereferencing a bad pointer later. + Assume 128Mb since that's the amount of RAM on a Cayman. Modify + when there is an SH-5 board with more. */ + if ((fp < (unsigned long) phys_to_virt(__MEMORY_START)) || + (fp >= (unsigned long)(phys_to_virt(__MEMORY_START)) + 128*1024*1024) || + ((fp & 7) != 0)) { + return -EINVAL; + } + + /* + * Depth to walk, depth is completely arbitrary. + */ + for (i = 0; i < 100; i++, prologue += sizeof(unsigned long)) { + unsigned long op; + u8 major, minor; + u8 src, dest, disp; + + op = *(unsigned long *)prologue; + + major = (op >> 26) & 0x3f; + src = (op >> 20) & 0x3f; + minor = (op >> 16) & 0xf; + disp = (op >> 10) & 0x3f; + dest = (op >> 4) & 0x3f; + + /* + * Stack frame creation happens in a number of ways.. in the + * general case when the stack frame is less than 511 bytes, + * it's generally created by an addi or addi.l: + * + * addi/addi.l r15, -FRAME_SIZE, r15 + * + * in the event that the frame size is bigger than this, it's + * typically created using a movi/sub pair as follows: + * + * movi FRAME_SIZE, rX + * sub r15, rX, r15 + */ + + switch (major) { + case (0x00 >> 2): + switch (minor) { + case 0x8: /* add.l */ + case 0x9: /* add */ + /* Look for r15, r63, r14 */ + if (src == 15 && disp == 63 && dest == 14) + found_prologue_end = 1; + + break; + case 0xa: /* sub.l */ + case 0xb: /* sub */ + if (src != 15 || dest != 15) + continue; + + fp_displacement -= regcache[disp]; + fp_prev = fp - fp_displacement; + break; + } + break; + case (0xa8 >> 2): /* st.l */ + if (src != 15) + continue; + + switch (dest) { + case 14: + if (offset_r14 || fp_displacement == 0) + continue; + + offset_r14 = (u64)(((((s64)op >> 10) & 0x3ff) << 54) >> 54); + offset_r14 *= sizeof(unsigned long); + offset_r14 += fp_displacement; + break; + case 18: + if (offset_r18 || fp_displacement == 0) + continue; + + offset_r18 = (u64)(((((s64)op >> 10) & 0x3ff) << 54) >> 54); + offset_r18 *= sizeof(unsigned long); + offset_r18 += fp_displacement; + break; + } + + break; + case (0xcc >> 2): /* movi */ + if (dest >= 63) { + printk(KERN_NOTICE "%s: Invalid dest reg %d " + "specified in movi handler. Failed " + "opcode was 0x%lx: ", __FUNCTION__, + dest, op); + + continue; + } + + /* Sign extend */ + regcache[dest] = + ((((s64)(u64)op >> 10) & 0xffff) << 54) >> 54; + break; + case (0xd0 >> 2): /* addi */ + case (0xd4 >> 2): /* addi.l */ + /* Look for r15, -FRAME_SIZE, r15 */ + if (src != 15 || dest != 15) + continue; + + /* Sign extended frame size.. */ + fp_displacement += + (u64)(((((s64)op >> 10) & 0x3ff) << 54) >> 54); + fp_prev = fp - fp_displacement; + break; + } + + if (found_prologue_end && offset_r14 && (offset_r18 || *pprev_pc) && fp_prev) + break; + } + + if (offset_r14 == 0 || fp_prev == 0) { + if (!offset_r14) + pr_debug("Unable to find r14 offset\n"); + if (!fp_prev) + pr_debug("Unable to find previous fp\n"); + + return -EINVAL; + } + + /* For innermost leaf function, there might not be a offset_r18 */ + if (!*pprev_pc && (offset_r18 == 0)) + return -EINVAL; + + *pprev_fp = *(unsigned long *)(fp_prev + offset_r14); + + if (offset_r18) + *pprev_pc = *(unsigned long *)(fp_prev + offset_r18); + + *pprev_pc &= ~1; + + return 0; +} + +/* Don't put this on the stack since we'll want to call sh64_unwind + * when we're close to underflowing the stack anyway. */ +static struct pt_regs here_regs; + +extern const char syscall_ret; +extern const char ret_from_syscall; +extern const char ret_from_exception; +extern const char ret_from_irq; + +static void sh64_unwind_inner(struct pt_regs *regs); + +static void unwind_nested (unsigned long pc, unsigned long fp) +{ + if ((fp >= __MEMORY_START) && + ((fp & 7) == 0)) { + sh64_unwind_inner((struct pt_regs *) fp); + } +} + +static void sh64_unwind_inner(struct pt_regs *regs) +{ + unsigned long pc, fp; + int ofs = 0; + int first_pass; + + pc = regs->pc & ~1; + fp = regs->regs[14]; + + first_pass = 1; + for (;;) { + int cond; + unsigned long next_fp, next_pc; + + if (pc == ((unsigned long) &syscall_ret & ~1)) { + printk("SYSCALL\n"); + unwind_nested(pc,fp); + return; + } + + if (pc == ((unsigned long) &ret_from_syscall & ~1)) { + printk("SYSCALL (PREEMPTED)\n"); + unwind_nested(pc,fp); + return; + } + + /* In this case, the PC is discovered by lookup_prev_stack_frame but + it has 4 taken off it to look like the 'caller' */ + if (pc == ((unsigned long) &ret_from_exception & ~1)) { + printk("EXCEPTION\n"); + unwind_nested(pc,fp); + return; + } + + if (pc == ((unsigned long) &ret_from_irq & ~1)) { + printk("IRQ\n"); + unwind_nested(pc,fp); + return; + } + + cond = ((pc >= __MEMORY_START) && (fp >= __MEMORY_START) && + ((pc & 3) == 0) && ((fp & 7) == 0)); + + pc -= ofs; + + printk("[<%08lx>] ", pc); + print_symbol("%s\n", pc); + + if (first_pass) { + /* If the innermost frame is a leaf function, it's + * possible that r18 is never saved out to the stack. + */ + next_pc = regs->regs[18]; + } else { + next_pc = 0; + } + + if (lookup_prev_stack_frame(fp, pc, &next_fp, &next_pc, regs) == 0) { + ofs = sizeof(unsigned long); + pc = next_pc & ~1; + fp = next_fp; + } else { + printk("Unable to lookup previous stack frame\n"); + break; + } + first_pass = 0; + } + + printk("\n"); + +} + +void sh64_unwind(struct pt_regs *regs) +{ + if (!regs) { + /* + * Fetch current regs if we have no other saved state to back + * trace from. + */ + regs = &here_regs; + + __asm__ __volatile__ ("ori r14, 0, %0" : "=r" (regs->regs[14])); + __asm__ __volatile__ ("ori r15, 0, %0" : "=r" (regs->regs[15])); + __asm__ __volatile__ ("ori r18, 0, %0" : "=r" (regs->regs[18])); + + __asm__ __volatile__ ("gettr tr0, %0" : "=r" (regs->tregs[0])); + __asm__ __volatile__ ("gettr tr1, %0" : "=r" (regs->tregs[1])); + __asm__ __volatile__ ("gettr tr2, %0" : "=r" (regs->tregs[2])); + __asm__ __volatile__ ("gettr tr3, %0" : "=r" (regs->tregs[3])); + __asm__ __volatile__ ("gettr tr4, %0" : "=r" (regs->tregs[4])); + __asm__ __volatile__ ("gettr tr5, %0" : "=r" (regs->tregs[5])); + __asm__ __volatile__ ("gettr tr6, %0" : "=r" (regs->tregs[6])); + __asm__ __volatile__ ("gettr tr7, %0" : "=r" (regs->tregs[7])); + + __asm__ __volatile__ ( + "pta 0f, tr0\n\t" + "blink tr0, %0\n\t" + "0: nop" + : "=r" (regs->pc) + ); + } + + printk("\nCall Trace:\n"); + sh64_unwind_inner(regs); +} + diff --git a/arch/sh/kernel/dump_task.c b/arch/sh/kernel/dump_task.c new file mode 100644 index 000000000000..4a8a4083ff0b --- /dev/null +++ b/arch/sh/kernel/dump_task.c @@ -0,0 +1,31 @@ +#include <linux/elfcore.h> +#include <linux/sched.h> + +/* + * Capture the user space registers if the task is not running (in user space) + */ +int dump_task_regs(struct task_struct *tsk, elf_gregset_t *regs) +{ + struct pt_regs ptregs; + + ptregs = *task_pt_regs(tsk); + elf_core_copy_regs(regs, &ptregs); + + return 1; +} + +int dump_task_fpu(struct task_struct *tsk, elf_fpregset_t *fpu) +{ + int fpvalid = 0; + +#if defined(CONFIG_SH_FPU) + fpvalid = !!tsk_used_math(tsk); + if (fpvalid) { + unlazy_fpu(tsk, task_pt_regs(tsk)); + memcpy(fpu, &tsk->thread.fpu.hard, sizeof(*fpu)); + } +#endif + + return fpvalid; +} + diff --git a/arch/sh/kernel/early_printk.c b/arch/sh/kernel/early_printk.c index 2f30977558ad..957f25611543 100644 --- a/arch/sh/kernel/early_printk.c +++ b/arch/sh/kernel/early_printk.c @@ -63,7 +63,8 @@ static struct console bios_console = { #include <linux/serial_core.h> #include "../../../drivers/serial/sh-sci.h" -#if defined(CONFIG_CPU_SUBTYPE_SH7720) +#if defined(CONFIG_CPU_SUBTYPE_SH7720) || \ + defined(CONFIG_CPU_SUBTYPE_SH7721) #define EPK_SCSMR_VALUE 0x000 #define EPK_SCBRR_VALUE 0x00C #define EPK_FIFO_SIZE 64 @@ -117,7 +118,8 @@ static struct console scif_console = { }; #if !defined(CONFIG_SH_STANDARD_BIOS) -#if defined(CONFIG_CPU_SUBTYPE_SH7720) +#if defined(CONFIG_CPU_SUBTYPE_SH7720) || \ + defined(CONFIG_CPU_SUBTYPE_SH7721) static void scif_sercon_init(char *s) { sci_out(&scif_port, SCSCR, 0x0000); /* clear TE and RE */ @@ -208,10 +210,12 @@ static int __init setup_early_printk(char *buf) if (!strncmp(buf, "serial", 6)) { early_console = &scif_console; -#if (defined(CONFIG_CPU_SH4) || defined(CONFIG_CPU_SUBTYPE_SH7720)) && \ - !defined(CONFIG_SH_STANDARD_BIOS) +#if !defined(CONFIG_SH_STANDARD_BIOS) +#if defined(CONFIG_CPU_SH4) || defined(CONFIG_CPU_SUBTYPE_SH7720) || \ + defined(CONFIG_CPU_SUBTYPE_SH7721) scif_sercon_init(buf + 6); #endif +#endif } #endif diff --git a/arch/sh/kernel/entry-common.S b/arch/sh/kernel/entry-common.S index e0317ed080c3..926b2e7b11c1 100644 --- a/arch/sh/kernel/entry-common.S +++ b/arch/sh/kernel/entry-common.S @@ -176,25 +176,6 @@ work_notifysig: jmp @r1 lds r0, pr work_resched: -#if defined(CONFIG_GUSA) && !defined(CONFIG_PREEMPT) - ! gUSA handling - mov.l @(OFF_SP,r15), r0 ! get user space stack pointer - mov r0, r1 - shll r0 - bf/s 1f - shll r0 - bf/s 1f - mov #OFF_PC, r0 - ! SP >= 0xc0000000 : gUSA mark - mov.l @(r0,r15), r2 ! get user space PC (program counter) - mov.l @(OFF_R0,r15), r3 ! end point - cmp/hs r3, r2 ! r2 >= r3? - bt 1f - add r3, r1 ! rewind point #2 - mov.l r1, @(r0,r15) ! reset PC to rewind point #2 - ! -1: -#endif mov.l 1f, r1 jsr @r1 ! schedule nop @@ -224,7 +205,7 @@ work_resched: syscall_exit_work: ! r0: current_thread_info->flags ! r8: current_thread_info - tst #_TIF_SYSCALL_TRACE | _TIF_SINGLESTEP, r0 + tst #_TIF_SYSCALL_TRACE | _TIF_SINGLESTEP | _TIF_SYSCALL_AUDIT, r0 bt/s work_pending tst #_TIF_NEED_RESCHED, r0 #ifdef CONFIG_TRACE_IRQFLAGS @@ -234,6 +215,8 @@ syscall_exit_work: #endif sti ! XXX setup arguments... + mov r15, r4 + mov #1, r5 mov.l 4f, r0 ! do_syscall_trace jsr @r0 nop @@ -244,6 +227,8 @@ syscall_exit_work: syscall_trace_entry: ! Yes it is traced. ! XXX setup arguments... + mov r15, r4 + mov #0, r5 mov.l 4f, r11 ! Call do_syscall_trace which notifies jsr @r11 ! superior (will chomp R[0-7]) nop @@ -366,7 +351,7 @@ ENTRY(system_call) ! get_current_thread_info r8, r10 mov.l @(TI_FLAGS,r8), r8 - mov #_TIF_SYSCALL_TRACE, r10 + mov #(_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT), r10 tst r10, r8 bf syscall_trace_entry ! diff --git a/arch/sh/kernel/head.S b/arch/sh/kernel/head_32.S index 3338239717f1..d67d7ed09f22 100644 --- a/arch/sh/kernel/head.S +++ b/arch/sh/kernel/head_32.S @@ -32,7 +32,11 @@ ENTRY(empty_zero_page) .long 1 /* LOADER_TYPE */ .long 0x00360000 /* INITRD_START */ .long 0x000a0000 /* INITRD_SIZE */ - .long 0 +#ifdef CONFIG_32BIT + .long 0x53453f00 + 32 /* "SE?" = 32 bit */ +#else + .long 0x53453f00 + 29 /* "SE?" = 29 bit */ +#endif 1: .skip PAGE_SIZE - empty_zero_page - 1b diff --git a/arch/sh/kernel/head_64.S b/arch/sh/kernel/head_64.S new file mode 100644 index 000000000000..f42d4c0feb76 --- /dev/null +++ b/arch/sh/kernel/head_64.S @@ -0,0 +1,356 @@ +/* + * arch/sh/kernel/head_64.S + * + * Copyright (C) 2000, 2001 Paolo Alberelli + * Copyright (C) 2003, 2004 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <asm/page.h> +#include <asm/cache.h> +#include <asm/tlb.h> +#include <asm/cpu/registers.h> +#include <asm/cpu/mmu_context.h> +#include <asm/thread_info.h> + +/* + * MMU defines: TLB boundaries. + */ + +#define MMUIR_FIRST ITLB_FIXED +#define MMUIR_END ITLB_LAST_VAR_UNRESTRICTED+TLB_STEP +#define MMUIR_STEP TLB_STEP + +#define MMUDR_FIRST DTLB_FIXED +#define MMUDR_END DTLB_LAST_VAR_UNRESTRICTED+TLB_STEP +#define MMUDR_STEP TLB_STEP + +/* Safety check : CONFIG_PAGE_OFFSET has to be a multiple of 512Mb */ +#if (CONFIG_PAGE_OFFSET & ((1UL<<29)-1)) +#error "CONFIG_PAGE_OFFSET must be a multiple of 512Mb" +#endif + +/* + * MMU defines: Fixed TLBs. + */ +/* Deal safely with the case where the base of RAM is not 512Mb aligned */ + +#define ALIGN_512M_MASK (0xffffffffe0000000) +#define ALIGNED_EFFECTIVE ((CONFIG_PAGE_OFFSET + CONFIG_MEMORY_START) & ALIGN_512M_MASK) +#define ALIGNED_PHYSICAL (CONFIG_MEMORY_START & ALIGN_512M_MASK) + +#define MMUIR_TEXT_H (0x0000000000000003 | ALIGNED_EFFECTIVE) + /* Enabled, Shared, ASID 0, Eff. Add. 0xA0000000 */ + +#define MMUIR_TEXT_L (0x000000000000009a | ALIGNED_PHYSICAL) + /* 512 Mb, Cacheable, Write-back, execute, Not User, Ph. Add. */ + +#define MMUDR_CACHED_H 0x0000000000000003 | ALIGNED_EFFECTIVE + /* Enabled, Shared, ASID 0, Eff. Add. 0xA0000000 */ +#define MMUDR_CACHED_L 0x000000000000015a | ALIGNED_PHYSICAL + /* 512 Mb, Cacheable, Write-back, read/write, Not User, Ph. Add. */ + +#ifdef CONFIG_CACHE_OFF +#define ICCR0_INIT_VAL ICCR0_OFF /* ICACHE off */ +#else +#define ICCR0_INIT_VAL ICCR0_ON | ICCR0_ICI /* ICE + ICI */ +#endif +#define ICCR1_INIT_VAL ICCR1_NOLOCK /* No locking */ + +#if defined (CONFIG_CACHE_OFF) +#define OCCR0_INIT_VAL OCCR0_OFF /* D-cache: off */ +#elif defined (CONFIG_CACHE_WRITETHROUGH) +#define OCCR0_INIT_VAL OCCR0_ON | OCCR0_OCI | OCCR0_WT /* D-cache: on, */ + /* WT, invalidate */ +#elif defined (CONFIG_CACHE_WRITEBACK) +#define OCCR0_INIT_VAL OCCR0_ON | OCCR0_OCI | OCCR0_WB /* D-cache: on, */ + /* WB, invalidate */ +#else +#error preprocessor flag CONFIG_CACHE_... not recognized! +#endif + +#define OCCR1_INIT_VAL OCCR1_NOLOCK /* No locking */ + + .section .empty_zero_page, "aw" + .global empty_zero_page + +empty_zero_page: + .long 1 /* MOUNT_ROOT_RDONLY */ + .long 0 /* RAMDISK_FLAGS */ + .long 0x0200 /* ORIG_ROOT_DEV */ + .long 1 /* LOADER_TYPE */ + .long 0x00800000 /* INITRD_START */ + .long 0x00800000 /* INITRD_SIZE */ + .long 0 + + .text + .balign 4096,0,4096 + + .section .data, "aw" + .balign PAGE_SIZE + + .section .data, "aw" + .balign PAGE_SIZE + + .global mmu_pdtp_cache +mmu_pdtp_cache: + .space PAGE_SIZE, 0 + + .global empty_bad_page +empty_bad_page: + .space PAGE_SIZE, 0 + + .global empty_bad_pte_table +empty_bad_pte_table: + .space PAGE_SIZE, 0 + + .global fpu_in_use +fpu_in_use: .quad 0 + + + .section .text.head, "ax" + .balign L1_CACHE_BYTES +/* + * Condition at the entry of __stext: + * . Reset state: + * . SR.FD = 1 (FPU disabled) + * . SR.BL = 1 (Exceptions disabled) + * . SR.MD = 1 (Privileged Mode) + * . SR.MMU = 0 (MMU Disabled) + * . SR.CD = 0 (CTC User Visible) + * . SR.IMASK = Undefined (Interrupt Mask) + * + * Operations supposed to be performed by __stext: + * . prevent speculative fetch onto device memory while MMU is off + * . reflect as much as possible SH5 ABI (r15, r26, r27, r18) + * . first, save CPU state and set it to something harmless + * . any CPU detection and/or endianness settings (?) + * . initialize EMI/LMI (but not TMU/RTC/INTC/SCIF): TBD + * . set initial TLB entries for cached and uncached regions + * (no fine granularity paging) + * . set initial cache state + * . enable MMU and caches + * . set CPU to a consistent state + * . registers (including stack pointer and current/KCR0) + * . NOT expecting to set Exception handling nor VBR/RESVEC/DCR + * at this stage. This is all to later Linux initialization steps. + * . initialize FPU + * . clear BSS + * . jump into start_kernel() + * . be prepared to hopeless start_kernel() returns. + * + */ + .global _stext +_stext: + /* + * Prevent speculative fetch on device memory due to + * uninitialized target registers. + */ + ptabs/u ZERO, tr0 + ptabs/u ZERO, tr1 + ptabs/u ZERO, tr2 + ptabs/u ZERO, tr3 + ptabs/u ZERO, tr4 + ptabs/u ZERO, tr5 + ptabs/u ZERO, tr6 + ptabs/u ZERO, tr7 + synci + + /* + * Read/Set CPU state. After this block: + * r29 = Initial SR + */ + getcon SR, r29 + movi SR_HARMLESS, r20 + putcon r20, SR + + /* + * Initialize EMI/LMI. To Be Done. + */ + + /* + * CPU detection and/or endianness settings (?). To Be Done. + * Pure PIC code here, please ! Just save state into r30. + * After this block: + * r30 = CPU type/Platform Endianness + */ + + /* + * Set initial TLB entries for cached and uncached regions. + * Note: PTA/BLINK is PIC code, PTABS/BLINK isn't ! + */ + /* Clear ITLBs */ + pta clear_ITLB, tr1 + movi MMUIR_FIRST, r21 + movi MMUIR_END, r22 +clear_ITLB: + putcfg r21, 0, ZERO /* Clear MMUIR[n].PTEH.V */ + addi r21, MMUIR_STEP, r21 + bne r21, r22, tr1 + + /* Clear DTLBs */ + pta clear_DTLB, tr1 + movi MMUDR_FIRST, r21 + movi MMUDR_END, r22 +clear_DTLB: + putcfg r21, 0, ZERO /* Clear MMUDR[n].PTEH.V */ + addi r21, MMUDR_STEP, r21 + bne r21, r22, tr1 + + /* Map one big (512Mb) page for ITLB */ + movi MMUIR_FIRST, r21 + movi MMUIR_TEXT_L, r22 /* PTEL first */ + add.l r22, r63, r22 /* Sign extend */ + putcfg r21, 1, r22 /* Set MMUIR[0].PTEL */ + movi MMUIR_TEXT_H, r22 /* PTEH last */ + add.l r22, r63, r22 /* Sign extend */ + putcfg r21, 0, r22 /* Set MMUIR[0].PTEH */ + + /* Map one big CACHED (512Mb) page for DTLB */ + movi MMUDR_FIRST, r21 + movi MMUDR_CACHED_L, r22 /* PTEL first */ + add.l r22, r63, r22 /* Sign extend */ + putcfg r21, 1, r22 /* Set MMUDR[0].PTEL */ + movi MMUDR_CACHED_H, r22 /* PTEH last */ + add.l r22, r63, r22 /* Sign extend */ + putcfg r21, 0, r22 /* Set MMUDR[0].PTEH */ + +#ifdef CONFIG_EARLY_PRINTK + /* + * Setup a DTLB translation for SCIF phys. + */ + addi r21, MMUDR_STEP, r21 + movi 0x0a03, r22 /* SCIF phys */ + shori 0x0148, r22 + putcfg r21, 1, r22 /* PTEL first */ + movi 0xfa03, r22 /* 0xfa030000, fixed SCIF virt */ + shori 0x0003, r22 + putcfg r21, 0, r22 /* PTEH last */ +#endif + + /* + * Set cache behaviours. + */ + /* ICache */ + movi ICCR_BASE, r21 + movi ICCR0_INIT_VAL, r22 + movi ICCR1_INIT_VAL, r23 + putcfg r21, ICCR_REG0, r22 + putcfg r21, ICCR_REG1, r23 + + /* OCache */ + movi OCCR_BASE, r21 + movi OCCR0_INIT_VAL, r22 + movi OCCR1_INIT_VAL, r23 + putcfg r21, OCCR_REG0, r22 + putcfg r21, OCCR_REG1, r23 + + + /* + * Enable Caches and MMU. Do the first non-PIC jump. + * Now head.S global variables, constants and externs + * can be used. + */ + getcon SR, r21 + movi SR_ENABLE_MMU, r22 + or r21, r22, r21 + putcon r21, SSR + movi hyperspace, r22 + ori r22, 1, r22 /* Make it SHmedia, not required but..*/ + putcon r22, SPC + synco + rte /* And now go into the hyperspace ... */ +hyperspace: /* ... that's the next instruction ! */ + + /* + * Set CPU to a consistent state. + * r31 = FPU support flag + * tr0/tr7 in use. Others give a chance to loop somewhere safe + */ + movi start_kernel, r32 + ori r32, 1, r32 + + ptabs r32, tr0 /* r32 = _start_kernel address */ + pta/u hopeless, tr1 + pta/u hopeless, tr2 + pta/u hopeless, tr3 + pta/u hopeless, tr4 + pta/u hopeless, tr5 + pta/u hopeless, tr6 + pta/u hopeless, tr7 + gettr tr1, r28 /* r28 = hopeless address */ + + /* Set initial stack pointer */ + movi init_thread_union, SP + putcon SP, KCR0 /* Set current to init_task */ + movi THREAD_SIZE, r22 /* Point to the end */ + add SP, r22, SP + + /* + * Initialize FPU. + * Keep FPU flag in r31. After this block: + * r31 = FPU flag + */ + movi fpu_in_use, r31 /* Temporary */ + +#ifdef CONFIG_SH_FPU + getcon SR, r21 + movi SR_ENABLE_FPU, r22 + and r21, r22, r22 + putcon r22, SR /* Try to enable */ + getcon SR, r22 + xor r21, r22, r21 + shlri r21, 15, r21 /* Supposedly 0/1 */ + st.q r31, 0 , r21 /* Set fpu_in_use */ +#else + movi 0, r21 + st.q r31, 0 , r21 /* Set fpu_in_use */ +#endif + or r21, ZERO, r31 /* Set FPU flag at last */ + +#ifndef CONFIG_SH_NO_BSS_INIT +/* Don't clear BSS if running on slow platforms such as an RTL simulation, + remote memory via SHdebug link, etc. For these the memory can be guaranteed + to be all zero on boot anyway. */ + /* + * Clear bss + */ + pta clear_quad, tr1 + movi __bss_start, r22 + movi _end, r23 +clear_quad: + st.q r22, 0, ZERO + addi r22, 8, r22 + bne r22, r23, tr1 /* Both quad aligned, see vmlinux.lds.S */ +#endif + pta/u hopeless, tr1 + + /* Say bye to head.S but be prepared to wrongly get back ... */ + blink tr0, LINK + + /* If we ever get back here through LINK/tr1-tr7 */ + pta/u hopeless, tr7 + +hopeless: + /* + * Something's badly wrong here. Loop endlessly, + * there's nothing more we can do about it. + * + * Note on hopeless: it can be jumped into invariably + * before or after jumping into hyperspace. The only + * requirement is to be PIC called (PTA) before and + * any way (PTA/PTABS) after. According to Virtual + * to Physical mapping a simulator/emulator can easily + * tell where we came here from just looking at hopeless + * (PC) address. + * + * For debugging purposes: + * (r28) hopeless/loop address + * (r29) Original SR + * (r30) CPU type/Platform endianness + * (r31) FPU Support + * (r32) _start_kernel address + */ + blink tr7, ZERO diff --git a/arch/sh/kernel/init_task.c b/arch/sh/kernel/init_task.c index 4b449c4a6bad..f9bcc606127e 100644 --- a/arch/sh/kernel/init_task.c +++ b/arch/sh/kernel/init_task.c @@ -11,8 +11,8 @@ static struct fs_struct init_fs = INIT_FS; static struct files_struct init_files = INIT_FILES; static struct signal_struct init_signals = INIT_SIGNALS(init_signals); static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand); +struct pt_regs fake_swapper_regs; struct mm_struct init_mm = INIT_MM(init_mm); - EXPORT_SYMBOL(init_mm); /* @@ -22,7 +22,7 @@ EXPORT_SYMBOL(init_mm); * way process stacks are handled. This is done by having a special * "init_task" linker map entry.. */ -union thread_union init_thread_union +union thread_union init_thread_union __attribute__((__section__(".data.init_task"))) = { INIT_THREAD_INFO(init_task) }; diff --git a/arch/sh/kernel/io.c b/arch/sh/kernel/io.c index 501fe03e3715..71c9fde2fd90 100644 --- a/arch/sh/kernel/io.c +++ b/arch/sh/kernel/io.c @@ -61,73 +61,6 @@ void memset_io(volatile void __iomem *dst, int c, unsigned long count) } EXPORT_SYMBOL(memset_io); -void __raw_readsl(unsigned long addr, void *datap, int len) -{ - u32 *data; - - for (data = datap; (len != 0) && (((u32)data & 0x1f) != 0); len--) - *data++ = ctrl_inl(addr); - - if (likely(len >= (0x20 >> 2))) { - int tmp2, tmp3, tmp4, tmp5, tmp6; - - __asm__ __volatile__( - "1: \n\t" - "mov.l @%7, r0 \n\t" - "mov.l @%7, %2 \n\t" -#ifdef CONFIG_CPU_SH4 - "movca.l r0, @%0 \n\t" -#else - "mov.l r0, @%0 \n\t" -#endif - "mov.l @%7, %3 \n\t" - "mov.l @%7, %4 \n\t" - "mov.l @%7, %5 \n\t" - "mov.l @%7, %6 \n\t" - "mov.l @%7, r7 \n\t" - "mov.l @%7, r0 \n\t" - "mov.l %2, @(0x04,%0) \n\t" - "mov #0x20>>2, %2 \n\t" - "mov.l %3, @(0x08,%0) \n\t" - "sub %2, %1 \n\t" - "mov.l %4, @(0x0c,%0) \n\t" - "cmp/hi %1, %2 ! T if 32 > len \n\t" - "mov.l %5, @(0x10,%0) \n\t" - "mov.l %6, @(0x14,%0) \n\t" - "mov.l r7, @(0x18,%0) \n\t" - "mov.l r0, @(0x1c,%0) \n\t" - "bf.s 1b \n\t" - " add #0x20, %0 \n\t" - : "=&r" (data), "=&r" (len), - "=&r" (tmp2), "=&r" (tmp3), "=&r" (tmp4), - "=&r" (tmp5), "=&r" (tmp6) - : "r"(addr), "0" (data), "1" (len) - : "r0", "r7", "t", "memory"); - } - - for (; len != 0; len--) - *data++ = ctrl_inl(addr); -} -EXPORT_SYMBOL(__raw_readsl); - -void __raw_writesl(unsigned long addr, const void *data, int len) -{ - if (likely(len != 0)) { - int tmp1; - - __asm__ __volatile__ ( - "1: \n\t" - "mov.l @%0+, %1 \n\t" - "dt %3 \n\t" - "bf.s 1b \n\t" - " mov.l %1, @%4 \n\t" - : "=&r" (data), "=&r" (tmp1) - : "0" (data), "r" (len), "r"(addr) - : "t", "memory"); - } -} -EXPORT_SYMBOL(__raw_writesl); - void __iomem *ioport_map(unsigned long port, unsigned int nr) { return sh_mv.mv_ioport_map(port, nr); diff --git a/arch/sh/kernel/module.c b/arch/sh/kernel/module.c index 142a4e5b7ebc..b3d0a03b4c76 100644 --- a/arch/sh/kernel/module.c +++ b/arch/sh/kernel/module.c @@ -1,5 +1,15 @@ /* Kernel module help for SH. + SHcompact version by Kaz Kojima and Paul Mundt. + + SHmedia bits: + + Copyright 2004 SuperH (UK) Ltd + Author: Richard Curnow + + Based on the sh version, and on code from the sh64-specific parts of + modutils, originally written by Richard Curnow and Ben Gaster. + This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or @@ -21,12 +31,6 @@ #include <linux/string.h> #include <linux/kernel.h> -#if 0 -#define DEBUGP printk -#else -#define DEBUGP(fmt...) -#endif - void *module_alloc(unsigned long size) { if (size == 0) @@ -52,6 +56,7 @@ int module_frob_arch_sections(Elf_Ehdr *hdr, return 0; } +#ifdef CONFIG_SUPERH32 #define COPY_UNALIGNED_WORD(sw, tw, align) \ { \ void *__s = &(sw), *__t = &(tw); \ @@ -74,6 +79,10 @@ int module_frob_arch_sections(Elf_Ehdr *hdr, break; \ } \ } +#else +/* One thing SHmedia doesn't screw up! */ +#define COPY_UNALIGNED_WORD(sw, tw, align) { (tw) = (sw); } +#endif int apply_relocate_add(Elf32_Shdr *sechdrs, const char *strtab, @@ -89,8 +98,8 @@ int apply_relocate_add(Elf32_Shdr *sechdrs, uint32_t value; int align; - DEBUGP("Applying relocate section %u to %u\n", relsec, - sechdrs[relsec].sh_info); + pr_debug("Applying relocate section %u to %u\n", relsec, + sechdrs[relsec].sh_info); for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) { /* This is where to make the change */ location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr @@ -102,17 +111,44 @@ int apply_relocate_add(Elf32_Shdr *sechdrs, relocation = sym->st_value + rel[i].r_addend; align = (int)location & 3; +#ifdef CONFIG_SUPERH64 + /* For text addresses, bit2 of the st_other field indicates + * whether the symbol is SHmedia (1) or SHcompact (0). If + * SHmedia, the LSB of the symbol needs to be asserted + * for the CPU to be in SHmedia mode when it starts executing + * the branch target. */ + relocation |= (sym->st_other & 4); +#endif + switch (ELF32_R_TYPE(rel[i].r_info)) { case R_SH_DIR32: - COPY_UNALIGNED_WORD (*location, value, align); + COPY_UNALIGNED_WORD (*location, value, align); value += relocation; - COPY_UNALIGNED_WORD (value, *location, align); + COPY_UNALIGNED_WORD (value, *location, align); break; case R_SH_REL32: - relocation = (relocation - (Elf32_Addr) location); - COPY_UNALIGNED_WORD (*location, value, align); + relocation = (relocation - (Elf32_Addr) location); + COPY_UNALIGNED_WORD (*location, value, align); value += relocation; - COPY_UNALIGNED_WORD (value, *location, align); + COPY_UNALIGNED_WORD (value, *location, align); + break; + case R_SH_IMM_LOW16: + *location = (*location & ~0x3fffc00) | + ((relocation & 0xffff) << 10); + break; + case R_SH_IMM_MEDLOW16: + *location = (*location & ~0x3fffc00) | + (((relocation >> 16) & 0xffff) << 10); + break; + case R_SH_IMM_LOW16_PCREL: + relocation -= (Elf32_Addr) location; + *location = (*location & ~0x3fffc00) | + ((relocation & 0xffff) << 10); + break; + case R_SH_IMM_MEDLOW16_PCREL: + relocation -= (Elf32_Addr) location; + *location = (*location & ~0x3fffc00) | + (((relocation >> 16) & 0xffff) << 10); break; default: printk(KERN_ERR "module %s: Unknown relocation: %u\n", diff --git a/arch/sh/kernel/process.c b/arch/sh/kernel/process_32.c index 6d7f2b07e491..9ab1926b9d10 100644 --- a/arch/sh/kernel/process.c +++ b/arch/sh/kernel/process_32.c @@ -230,34 +230,6 @@ int dump_fpu(struct pt_regs *regs, elf_fpregset_t *fpu) return fpvalid; } -/* - * Capture the user space registers if the task is not running (in user space) - */ -int dump_task_regs(struct task_struct *tsk, elf_gregset_t *regs) -{ - struct pt_regs ptregs; - - ptregs = *task_pt_regs(tsk); - elf_core_copy_regs(regs, &ptregs); - - return 1; -} - -int dump_task_fpu(struct task_struct *tsk, elf_fpregset_t *fpu) -{ - int fpvalid = 0; - -#if defined(CONFIG_SH_FPU) - fpvalid = !!tsk_used_math(tsk); - if (fpvalid) { - unlazy_fpu(tsk, task_pt_regs(tsk)); - memcpy(fpu, &tsk->thread.fpu.hard, sizeof(*fpu)); - } -#endif - - return fpvalid; -} - asmlinkage void ret_from_fork(void); int copy_thread(int nr, unsigned long clone_flags, unsigned long usp, @@ -350,25 +322,6 @@ struct task_struct *__switch_to(struct task_struct *prev, unlazy_fpu(prev, task_pt_regs(prev)); #endif -#if defined(CONFIG_GUSA) && defined(CONFIG_PREEMPT) - { - struct pt_regs *regs; - - preempt_disable(); - regs = task_pt_regs(prev); - if (user_mode(regs) && regs->regs[15] >= 0xc0000000) { - int offset = (int)regs->regs[15]; - - /* Reset stack pointer: clear critical region mark */ - regs->regs[15] = regs->regs[1]; - if (regs->pc < regs->regs[0]) - /* Go to rewind point */ - regs->pc = regs->regs[0] + offset; - } - preempt_enable_no_resched(); - } -#endif - #ifdef CONFIG_MMU /* * Restore the kernel mode register @@ -510,49 +463,3 @@ asmlinkage void break_point_trap(void) force_sig(SIGTRAP, current); } - -/* - * Generic trap handler. - */ -asmlinkage void debug_trap_handler(unsigned long r4, unsigned long r5, - unsigned long r6, unsigned long r7, - struct pt_regs __regs) -{ - struct pt_regs *regs = RELOC_HIDE(&__regs, 0); - - /* Rewind */ - regs->pc -= instruction_size(ctrl_inw(regs->pc - 4)); - - if (notify_die(DIE_TRAP, "debug trap", regs, 0, regs->tra & 0xff, - SIGTRAP) == NOTIFY_STOP) - return; - - force_sig(SIGTRAP, current); -} - -/* - * Special handler for BUG() traps. - */ -asmlinkage void bug_trap_handler(unsigned long r4, unsigned long r5, - unsigned long r6, unsigned long r7, - struct pt_regs __regs) -{ - struct pt_regs *regs = RELOC_HIDE(&__regs, 0); - - /* Rewind */ - regs->pc -= instruction_size(ctrl_inw(regs->pc - 4)); - - if (notify_die(DIE_TRAP, "bug trap", regs, 0, TRAPA_BUG_OPCODE & 0xff, - SIGTRAP) == NOTIFY_STOP) - return; - -#ifdef CONFIG_BUG - if (__kernel_text_address(instruction_pointer(regs))) { - u16 insn = *(u16 *)instruction_pointer(regs); - if (insn == TRAPA_BUG_OPCODE) - handle_BUG(regs); - } -#endif - - force_sig(SIGTRAP, current); -} diff --git a/arch/sh/kernel/process_64.c b/arch/sh/kernel/process_64.c new file mode 100644 index 000000000000..cff3b7dc9c56 --- /dev/null +++ b/arch/sh/kernel/process_64.c @@ -0,0 +1,701 @@ +/* + * arch/sh/kernel/process_64.c + * + * This file handles the architecture-dependent parts of process handling.. + * + * Copyright (C) 2000, 2001 Paolo Alberelli + * Copyright (C) 2003 - 2007 Paul Mundt + * Copyright (C) 2003, 2004 Richard Curnow + * + * Started from SH3/4 version: + * Copyright (C) 1999, 2000 Niibe Yutaka & Kaz Kojima + * + * In turn started from i386 version: + * Copyright (C) 1995 Linus Torvalds + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/mm.h> +#include <linux/fs.h> +#include <linux/ptrace.h> +#include <linux/reboot.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/proc_fs.h> +#include <linux/io.h> +#include <asm/uaccess.h> +#include <asm/pgtable.h> +#include <asm/mmu_context.h> + +struct task_struct *last_task_used_math = NULL; + +static int hlt_counter = 1; + +#define HARD_IDLE_TIMEOUT (HZ / 3) + +void disable_hlt(void) +{ + hlt_counter++; +} + +void enable_hlt(void) +{ + hlt_counter--; +} + +static int __init nohlt_setup(char *__unused) +{ + hlt_counter = 1; + return 1; +} + +static int __init hlt_setup(char *__unused) +{ + hlt_counter = 0; + return 1; +} + +__setup("nohlt", nohlt_setup); +__setup("hlt", hlt_setup); + +static inline void hlt(void) +{ + __asm__ __volatile__ ("sleep" : : : "memory"); +} + +/* + * The idle loop on a uniprocessor SH.. + */ +void cpu_idle(void) +{ + /* endless idle loop with no priority at all */ + while (1) { + if (hlt_counter) { + while (!need_resched()) + cpu_relax(); + } else { + local_irq_disable(); + while (!need_resched()) { + local_irq_enable(); + hlt(); + local_irq_disable(); + } + local_irq_enable(); + } + preempt_enable_no_resched(); + schedule(); + preempt_disable(); + } + +} + +void machine_restart(char * __unused) +{ + extern void phys_stext(void); + + phys_stext(); +} + +void machine_halt(void) +{ + for (;;); +} + +void machine_power_off(void) +{ +#if 0 + /* Disable watchdog timer */ + ctrl_outl(0xa5000000, WTCSR); + /* Configure deep standby on sleep */ + ctrl_outl(0x03, STBCR); +#endif + + __asm__ __volatile__ ( + "sleep\n\t" + "synci\n\t" + "nop;nop;nop;nop\n\t" + ); + + panic("Unexpected wakeup!\n"); +} + +void (*pm_power_off)(void) = machine_power_off; +EXPORT_SYMBOL(pm_power_off); + +void show_regs(struct pt_regs * regs) +{ + unsigned long long ah, al, bh, bl, ch, cl; + + printk("\n"); + + ah = (regs->pc) >> 32; + al = (regs->pc) & 0xffffffff; + bh = (regs->regs[18]) >> 32; + bl = (regs->regs[18]) & 0xffffffff; + ch = (regs->regs[15]) >> 32; + cl = (regs->regs[15]) & 0xffffffff; + printk("PC : %08Lx%08Lx LINK: %08Lx%08Lx SP : %08Lx%08Lx\n", + ah, al, bh, bl, ch, cl); + + ah = (regs->sr) >> 32; + al = (regs->sr) & 0xffffffff; + asm volatile ("getcon " __TEA ", %0" : "=r" (bh)); + asm volatile ("getcon " __TEA ", %0" : "=r" (bl)); + bh = (bh) >> 32; + bl = (bl) & 0xffffffff; + asm volatile ("getcon " __KCR0 ", %0" : "=r" (ch)); + asm volatile ("getcon " __KCR0 ", %0" : "=r" (cl)); + ch = (ch) >> 32; + cl = (cl) & 0xffffffff; + printk("SR : %08Lx%08Lx TEA : %08Lx%08Lx KCR0: %08Lx%08Lx\n", + ah, al, bh, bl, ch, cl); + + ah = (regs->regs[0]) >> 32; + al = (regs->regs[0]) & 0xffffffff; + bh = (regs->regs[1]) >> 32; + bl = (regs->regs[1]) & 0xffffffff; + ch = (regs->regs[2]) >> 32; + cl = (regs->regs[2]) & 0xffffffff; + printk("R0 : %08Lx%08Lx R1 : %08Lx%08Lx R2 : %08Lx%08Lx\n", + ah, al, bh, bl, ch, cl); + + ah = (regs->regs[3]) >> 32; + al = (regs->regs[3]) & 0xffffffff; + bh = (regs->regs[4]) >> 32; + bl = (regs->regs[4]) & 0xffffffff; + ch = (regs->regs[5]) >> 32; + cl = (regs->regs[5]) & 0xffffffff; + printk("R3 : %08Lx%08Lx R4 : %08Lx%08Lx R5 : %08Lx%08Lx\n", + ah, al, bh, bl, ch, cl); + + ah = (regs->regs[6]) >> 32; + al = (regs->regs[6]) & 0xffffffff; + bh = (regs->regs[7]) >> 32; + bl = (regs->regs[7]) & 0xffffffff; + ch = (regs->regs[8]) >> 32; + cl = (regs->regs[8]) & 0xffffffff; + printk("R6 : %08Lx%08Lx R7 : %08Lx%08Lx R8 : %08Lx%08Lx\n", + ah, al, bh, bl, ch, cl); + + ah = (regs->regs[9]) >> 32; + al = (regs->regs[9]) & 0xffffffff; + bh = (regs->regs[10]) >> 32; + bl = (regs->regs[10]) & 0xffffffff; + ch = (regs->regs[11]) >> 32; + cl = (regs->regs[11]) & 0xffffffff; + printk("R9 : %08Lx%08Lx R10 : %08Lx%08Lx R11 : %08Lx%08Lx\n", + ah, al, bh, bl, ch, cl); + + ah = (regs->regs[12]) >> 32; + al = (regs->regs[12]) & 0xffffffff; + bh = (regs->regs[13]) >> 32; + bl = (regs->regs[13]) & 0xffffffff; + ch = (regs->regs[14]) >> 32; + cl = (regs->regs[14]) & 0xffffffff; + printk("R12 : %08Lx%08Lx R13 : %08Lx%08Lx R14 : %08Lx%08Lx\n", + ah, al, bh, bl, ch, cl); + + ah = (regs->regs[16]) >> 32; + al = (regs->regs[16]) & 0xffffffff; + bh = (regs->regs[17]) >> 32; + bl = (regs->regs[17]) & 0xffffffff; + ch = (regs->regs[19]) >> 32; + cl = (regs->regs[19]) & 0xffffffff; + printk("R16 : %08Lx%08Lx R17 : %08Lx%08Lx R19 : %08Lx%08Lx\n", + ah, al, bh, bl, ch, cl); + + ah = (regs->regs[20]) >> 32; + al = (regs->regs[20]) & 0xffffffff; + bh = (regs->regs[21]) >> 32; + bl = (regs->regs[21]) & 0xffffffff; + ch = (regs->regs[22]) >> 32; + cl = (regs->regs[22]) & 0xffffffff; + printk("R20 : %08Lx%08Lx R21 : %08Lx%08Lx R22 : %08Lx%08Lx\n", + ah, al, bh, bl, ch, cl); + + ah = (regs->regs[23]) >> 32; + al = (regs->regs[23]) & 0xffffffff; + bh = (regs->regs[24]) >> 32; + bl = (regs->regs[24]) & 0xffffffff; + ch = (regs->regs[25]) >> 32; + cl = (regs->regs[25]) & 0xffffffff; + printk("R23 : %08Lx%08Lx R24 : %08Lx%08Lx R25 : %08Lx%08Lx\n", + ah, al, bh, bl, ch, cl); + + ah = (regs->regs[26]) >> 32; + al = (regs->regs[26]) & 0xffffffff; + bh = (regs->regs[27]) >> 32; + bl = (regs->regs[27]) & 0xffffffff; + ch = (regs->regs[28]) >> 32; + cl = (regs->regs[28]) & 0xffffffff; + printk("R26 : %08Lx%08Lx R27 : %08Lx%08Lx R28 : %08Lx%08Lx\n", + ah, al, bh, bl, ch, cl); + + ah = (regs->regs[29]) >> 32; + al = (regs->regs[29]) & 0xffffffff; + bh = (regs->regs[30]) >> 32; + bl = (regs->regs[30]) & 0xffffffff; + ch = (regs->regs[31]) >> 32; + cl = (regs->regs[31]) & 0xffffffff; + printk("R29 : %08Lx%08Lx R30 : %08Lx%08Lx R31 : %08Lx%08Lx\n", + ah, al, bh, bl, ch, cl); + + ah = (regs->regs[32]) >> 32; + al = (regs->regs[32]) & 0xffffffff; + bh = (regs->regs[33]) >> 32; + bl = (regs->regs[33]) & 0xffffffff; + ch = (regs->regs[34]) >> 32; + cl = (regs->regs[34]) & 0xffffffff; + printk("R32 : %08Lx%08Lx R33 : %08Lx%08Lx R34 : %08Lx%08Lx\n", + ah, al, bh, bl, ch, cl); + + ah = (regs->regs[35]) >> 32; + al = (regs->regs[35]) & 0xffffffff; + bh = (regs->regs[36]) >> 32; + bl = (regs->regs[36]) & 0xffffffff; + ch = (regs->regs[37]) >> 32; + cl = (regs->regs[37]) & 0xffffffff; + printk("R35 : %08Lx%08Lx R36 : %08Lx%08Lx R37 : %08Lx%08Lx\n", + ah, al, bh, bl, ch, cl); + + ah = (regs->regs[38]) >> 32; + al = (regs->regs[38]) & 0xffffffff; + bh = (regs->regs[39]) >> 32; + bl = (regs->regs[39]) & 0xffffffff; + ch = (regs->regs[40]) >> 32; + cl = (regs->regs[40]) & 0xffffffff; + printk("R38 : %08Lx%08Lx R39 : %08Lx%08Lx R40 : %08Lx%08Lx\n", + ah, al, bh, bl, ch, cl); + + ah = (regs->regs[41]) >> 32; + al = (regs->regs[41]) & 0xffffffff; + bh = (regs->regs[42]) >> 32; + bl = (regs->regs[42]) & 0xffffffff; + ch = (regs->regs[43]) >> 32; + cl = (regs->regs[43]) & 0xffffffff; + printk("R41 : %08Lx%08Lx R42 : %08Lx%08Lx R43 : %08Lx%08Lx\n", + ah, al, bh, bl, ch, cl); + + ah = (regs->regs[44]) >> 32; + al = (regs->regs[44]) & 0xffffffff; + bh = (regs->regs[45]) >> 32; + bl = (regs->regs[45]) & 0xffffffff; + ch = (regs->regs[46]) >> 32; + cl = (regs->regs[46]) & 0xffffffff; + printk("R44 : %08Lx%08Lx R45 : %08Lx%08Lx R46 : %08Lx%08Lx\n", + ah, al, bh, bl, ch, cl); + + ah = (regs->regs[47]) >> 32; + al = (regs->regs[47]) & 0xffffffff; + bh = (regs->regs[48]) >> 32; + bl = (regs->regs[48]) & 0xffffffff; + ch = (regs->regs[49]) >> 32; + cl = (regs->regs[49]) & 0xffffffff; + printk("R47 : %08Lx%08Lx R48 : %08Lx%08Lx R49 : %08Lx%08Lx\n", + ah, al, bh, bl, ch, cl); + + ah = (regs->regs[50]) >> 32; + al = (regs->regs[50]) & 0xffffffff; + bh = (regs->regs[51]) >> 32; + bl = (regs->regs[51]) & 0xffffffff; + ch = (regs->regs[52]) >> 32; + cl = (regs->regs[52]) & 0xffffffff; + printk("R50 : %08Lx%08Lx R51 : %08Lx%08Lx R52 : %08Lx%08Lx\n", + ah, al, bh, bl, ch, cl); + + ah = (regs->regs[53]) >> 32; + al = (regs->regs[53]) & 0xffffffff; + bh = (regs->regs[54]) >> 32; + bl = (regs->regs[54]) & 0xffffffff; + ch = (regs->regs[55]) >> 32; + cl = (regs->regs[55]) & 0xffffffff; + printk("R53 : %08Lx%08Lx R54 : %08Lx%08Lx R55 : %08Lx%08Lx\n", + ah, al, bh, bl, ch, cl); + + ah = (regs->regs[56]) >> 32; + al = (regs->regs[56]) & 0xffffffff; + bh = (regs->regs[57]) >> 32; + bl = (regs->regs[57]) & 0xffffffff; + ch = (regs->regs[58]) >> 32; + cl = (regs->regs[58]) & 0xffffffff; + printk("R56 : %08Lx%08Lx R57 : %08Lx%08Lx R58 : %08Lx%08Lx\n", + ah, al, bh, bl, ch, cl); + + ah = (regs->regs[59]) >> 32; + al = (regs->regs[59]) & 0xffffffff; + bh = (regs->regs[60]) >> 32; + bl = (regs->regs[60]) & 0xffffffff; + ch = (regs->regs[61]) >> 32; + cl = (regs->regs[61]) & 0xffffffff; + printk("R59 : %08Lx%08Lx R60 : %08Lx%08Lx R61 : %08Lx%08Lx\n", + ah, al, bh, bl, ch, cl); + + ah = (regs->regs[62]) >> 32; + al = (regs->regs[62]) & 0xffffffff; + bh = (regs->tregs[0]) >> 32; + bl = (regs->tregs[0]) & 0xffffffff; + ch = (regs->tregs[1]) >> 32; + cl = (regs->tregs[1]) & 0xffffffff; + printk("R62 : %08Lx%08Lx T0 : %08Lx%08Lx T1 : %08Lx%08Lx\n", + ah, al, bh, bl, ch, cl); + + ah = (regs->tregs[2]) >> 32; + al = (regs->tregs[2]) & 0xffffffff; + bh = (regs->tregs[3]) >> 32; + bl = (regs->tregs[3]) & 0xffffffff; + ch = (regs->tregs[4]) >> 32; + cl = (regs->tregs[4]) & 0xffffffff; + printk("T2 : %08Lx%08Lx T3 : %08Lx%08Lx T4 : %08Lx%08Lx\n", + ah, al, bh, bl, ch, cl); + + ah = (regs->tregs[5]) >> 32; + al = (regs->tregs[5]) & 0xffffffff; + bh = (regs->tregs[6]) >> 32; + bl = (regs->tregs[6]) & 0xffffffff; + ch = (regs->tregs[7]) >> 32; + cl = (regs->tregs[7]) & 0xffffffff; + printk("T5 : %08Lx%08Lx T6 : %08Lx%08Lx T7 : %08Lx%08Lx\n", + ah, al, bh, bl, ch, cl); + + /* + * If we're in kernel mode, dump the stack too.. + */ + if (!user_mode(regs)) { + void show_stack(struct task_struct *tsk, unsigned long *sp); + unsigned long sp = regs->regs[15] & 0xffffffff; + struct task_struct *tsk = get_current(); + + tsk->thread.kregs = regs; + + show_stack(tsk, (unsigned long *)sp); + } +} + +struct task_struct * alloc_task_struct(void) +{ + /* Get task descriptor pages */ + return (struct task_struct *) + __get_free_pages(GFP_KERNEL, get_order(THREAD_SIZE)); +} + +void free_task_struct(struct task_struct *p) +{ + free_pages((unsigned long) p, get_order(THREAD_SIZE)); +} + +/* + * Create a kernel thread + */ +ATTRIB_NORET void kernel_thread_helper(void *arg, int (*fn)(void *)) +{ + do_exit(fn(arg)); +} + +/* + * This is the mechanism for creating a new kernel thread. + * + * NOTE! Only a kernel-only process(ie the swapper or direct descendants + * who haven't done an "execve()") should use this: it will work within + * a system call from a "real" process, but the process memory space will + * not be freed until both the parent and the child have exited. + */ +int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags) +{ + struct pt_regs regs; + + memset(®s, 0, sizeof(regs)); + regs.regs[2] = (unsigned long)arg; + regs.regs[3] = (unsigned long)fn; + + regs.pc = (unsigned long)kernel_thread_helper; + regs.sr = (1 << 30); + + return do_fork(flags | CLONE_VM | CLONE_UNTRACED, 0, + ®s, 0, NULL, NULL); +} + +/* + * Free current thread data structures etc.. + */ +void exit_thread(void) +{ + /* + * See arch/sparc/kernel/process.c for the precedent for doing + * this -- RPC. + * + * The SH-5 FPU save/restore approach relies on + * last_task_used_math pointing to a live task_struct. When + * another task tries to use the FPU for the 1st time, the FPUDIS + * trap handling (see arch/sh/kernel/cpu/sh5/fpu.c) will save the + * existing FPU state to the FP regs field within + * last_task_used_math before re-loading the new task's FPU state + * (or initialising it if the FPU has been used before). So if + * last_task_used_math is stale, and its page has already been + * re-allocated for another use, the consequences are rather + * grim. Unless we null it here, there is no other path through + * which it would get safely nulled. + */ +#ifdef CONFIG_SH_FPU + if (last_task_used_math == current) { + last_task_used_math = NULL; + } +#endif +} + +void flush_thread(void) +{ + + /* Called by fs/exec.c (flush_old_exec) to remove traces of a + * previously running executable. */ +#ifdef CONFIG_SH_FPU + if (last_task_used_math == current) { + last_task_used_math = NULL; + } + /* Force FPU state to be reinitialised after exec */ + clear_used_math(); +#endif + + /* if we are a kernel thread, about to change to user thread, + * update kreg + */ + if(current->thread.kregs==&fake_swapper_regs) { + current->thread.kregs = + ((struct pt_regs *)(THREAD_SIZE + (unsigned long) current) - 1); + current->thread.uregs = current->thread.kregs; + } +} + +void release_thread(struct task_struct *dead_task) +{ + /* do nothing */ +} + +/* Fill in the fpu structure for a core dump.. */ +int dump_fpu(struct pt_regs *regs, elf_fpregset_t *fpu) +{ +#ifdef CONFIG_SH_FPU + int fpvalid; + struct task_struct *tsk = current; + + fpvalid = !!tsk_used_math(tsk); + if (fpvalid) { + if (current == last_task_used_math) { + enable_fpu(); + save_fpu(tsk, regs); + disable_fpu(); + last_task_used_math = 0; + regs->sr |= SR_FD; + } + + memcpy(fpu, &tsk->thread.fpu.hard, sizeof(*fpu)); + } + + return fpvalid; +#else + return 0; /* Task didn't use the fpu at all. */ +#endif +} + +asmlinkage void ret_from_fork(void); + +int copy_thread(int nr, unsigned long clone_flags, unsigned long usp, + unsigned long unused, + struct task_struct *p, struct pt_regs *regs) +{ + struct pt_regs *childregs; + unsigned long long se; /* Sign extension */ + +#ifdef CONFIG_SH_FPU + if(last_task_used_math == current) { + enable_fpu(); + save_fpu(current, regs); + disable_fpu(); + last_task_used_math = NULL; + regs->sr |= SR_FD; + } +#endif + /* Copy from sh version */ + childregs = (struct pt_regs *)(THREAD_SIZE + task_stack_page(p)) - 1; + + *childregs = *regs; + + if (user_mode(regs)) { + childregs->regs[15] = usp; + p->thread.uregs = childregs; + } else { + childregs->regs[15] = (unsigned long)task_stack_page(p) + THREAD_SIZE; + } + + childregs->regs[9] = 0; /* Set return value for child */ + childregs->sr |= SR_FD; /* Invalidate FPU flag */ + + p->thread.sp = (unsigned long) childregs; + p->thread.pc = (unsigned long) ret_from_fork; + + /* + * Sign extend the edited stack. + * Note that thread.pc and thread.pc will stay + * 32-bit wide and context switch must take care + * of NEFF sign extension. + */ + + se = childregs->regs[15]; + se = (se & NEFF_SIGN) ? (se | NEFF_MASK) : se; + childregs->regs[15] = se; + + return 0; +} + +asmlinkage int sys_fork(unsigned long r2, unsigned long r3, + unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7, + struct pt_regs *pregs) +{ + return do_fork(SIGCHLD, pregs->regs[15], pregs, 0, 0, 0); +} + +asmlinkage int sys_clone(unsigned long clone_flags, unsigned long newsp, + unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7, + struct pt_regs *pregs) +{ + if (!newsp) + newsp = pregs->regs[15]; + return do_fork(clone_flags, newsp, pregs, 0, 0, 0); +} + +/* + * This is trivial, and on the face of it looks like it + * could equally well be done in user mode. + * + * Not so, for quite unobvious reasons - register pressure. + * In user mode vfork() cannot have a stack frame, and if + * done by calling the "clone()" system call directly, you + * do not have enough call-clobbered registers to hold all + * the information you need. + */ +asmlinkage int sys_vfork(unsigned long r2, unsigned long r3, + unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7, + struct pt_regs *pregs) +{ + return do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD, pregs->regs[15], pregs, 0, 0, 0); +} + +/* + * sys_execve() executes a new program. + */ +asmlinkage int sys_execve(char *ufilename, char **uargv, + char **uenvp, unsigned long r5, + unsigned long r6, unsigned long r7, + struct pt_regs *pregs) +{ + int error; + char *filename; + + lock_kernel(); + filename = getname((char __user *)ufilename); + error = PTR_ERR(filename); + if (IS_ERR(filename)) + goto out; + + error = do_execve(filename, + (char __user * __user *)uargv, + (char __user * __user *)uenvp, + pregs); + if (error == 0) { + task_lock(current); + current->ptrace &= ~PT_DTRACE; + task_unlock(current); + } + putname(filename); +out: + unlock_kernel(); + return error; +} + +/* + * These bracket the sleeping functions.. + */ +extern void interruptible_sleep_on(wait_queue_head_t *q); + +#define mid_sched ((unsigned long) interruptible_sleep_on) + +static int in_sh64_switch_to(unsigned long pc) +{ + extern char __sh64_switch_to_end; + /* For a sleeping task, the PC is somewhere in the middle of the function, + so we don't have to worry about masking the LSB off */ + return (pc >= (unsigned long) sh64_switch_to) && + (pc < (unsigned long) &__sh64_switch_to_end); +} + +unsigned long get_wchan(struct task_struct *p) +{ + unsigned long schedule_fp; + unsigned long sh64_switch_to_fp; + unsigned long schedule_caller_pc; + unsigned long pc; + + if (!p || p == current || p->state == TASK_RUNNING) + return 0; + + /* + * The same comment as on the Alpha applies here, too ... + */ + pc = thread_saved_pc(p); + +#ifdef CONFIG_FRAME_POINTER + if (in_sh64_switch_to(pc)) { + sh64_switch_to_fp = (long) p->thread.sp; + /* r14 is saved at offset 4 in the sh64_switch_to frame */ + schedule_fp = *(unsigned long *) (long)(sh64_switch_to_fp + 4); + + /* and the caller of 'schedule' is (currently!) saved at offset 24 + in the frame of schedule (from disasm) */ + schedule_caller_pc = *(unsigned long *) (long)(schedule_fp + 24); + return schedule_caller_pc; + } +#endif + return pc; +} + +/* Provide a /proc/asids file that lists out the + ASIDs currently associated with the processes. (If the DM.PC register is + examined through the debug link, this shows ASID + PC. To make use of this, + the PID->ASID relationship needs to be known. This is primarily for + debugging.) + */ + +#if defined(CONFIG_SH64_PROC_ASIDS) +static int +asids_proc_info(char *buf, char **start, off_t fpos, int length, int *eof, void *data) +{ + int len=0; + struct task_struct *p; + read_lock(&tasklist_lock); + for_each_process(p) { + int pid = p->pid; + + if (!pid) + continue; + if (p->mm) + len += sprintf(buf+len, "%5d : %02lx\n", pid, + asid_cache(smp_processor_id())); + else + len += sprintf(buf+len, "%5d : (none)\n", pid); + } + read_unlock(&tasklist_lock); + *eof = 1; + return len; +} + +static int __init register_proc_asids(void) +{ + create_proc_read_entry("asids", 0, NULL, asids_proc_info, NULL); + return 0; +} +__initcall(register_proc_asids); +#endif diff --git a/arch/sh/kernel/ptrace.c b/arch/sh/kernel/ptrace_32.c index ac725f0aeb72..ce0664a58b49 100644 --- a/arch/sh/kernel/ptrace.c +++ b/arch/sh/kernel/ptrace_32.c @@ -6,7 +6,7 @@ * edited by Linus Torvalds * * SuperH version: Copyright (C) 1999, 2000 Kaz Kojima & Niibe Yutaka - * + * Audit support: Yuichi Nakamura <ynakam@hitachisoft.jp> */ #include <linux/kernel.h> #include <linux/sched.h> @@ -19,6 +19,7 @@ #include <linux/security.h> #include <linux/signal.h> #include <linux/io.h> +#include <linux/audit.h> #include <asm/uaccess.h> #include <asm/pgtable.h> #include <asm/system.h> @@ -248,15 +249,20 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) return ret; } -asmlinkage void do_syscall_trace(void) +asmlinkage void do_syscall_trace(struct pt_regs *regs, int entryexit) { struct task_struct *tsk = current; + if (unlikely(current->audit_context) && entryexit) + audit_syscall_exit(AUDITSC_RESULT(regs->regs[0]), + regs->regs[0]); + if (!test_thread_flag(TIF_SYSCALL_TRACE) && !test_thread_flag(TIF_SINGLESTEP)) - return; + goto out; if (!(tsk->ptrace & PT_PTRACED)) - return; + goto out; + /* the 0x80 provides a way for the tracing parent to distinguish between a syscall stop and SIGTRAP delivery */ ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD) && @@ -271,4 +277,11 @@ asmlinkage void do_syscall_trace(void) send_sig(tsk->exit_code, tsk, 1); tsk->exit_code = 0; } + +out: + if (unlikely(current->audit_context) && !entryexit) + audit_syscall_entry(AUDIT_ARCH_SH, regs->regs[3], + regs->regs[4], regs->regs[5], + regs->regs[6], regs->regs[7]); + } diff --git a/arch/sh/kernel/ptrace_64.c b/arch/sh/kernel/ptrace_64.c new file mode 100644 index 000000000000..f6fbdfa6876d --- /dev/null +++ b/arch/sh/kernel/ptrace_64.c @@ -0,0 +1,341 @@ +/* + * arch/sh/kernel/ptrace_64.c + * + * Copyright (C) 2000, 2001 Paolo Alberelli + * Copyright (C) 2003 - 2007 Paul Mundt + * + * Started from SH3/4 version: + * SuperH version: Copyright (C) 1999, 2000 Kaz Kojima & Niibe Yutaka + * + * Original x86 implementation: + * By Ross Biro 1/23/92 + * edited by Linus Torvalds + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/kernel.h> +#include <linux/rwsem.h> +#include <linux/sched.h> +#include <linux/mm.h> +#include <linux/smp.h> +#include <linux/smp_lock.h> +#include <linux/errno.h> +#include <linux/ptrace.h> +#include <linux/user.h> +#include <linux/signal.h> +#include <linux/syscalls.h> +#include <linux/audit.h> +#include <asm/io.h> +#include <asm/uaccess.h> +#include <asm/pgtable.h> +#include <asm/system.h> +#include <asm/processor.h> +#include <asm/mmu_context.h> + +/* This mask defines the bits of the SR which the user is not allowed to + change, which are everything except S, Q, M, PR, SZ, FR. */ +#define SR_MASK (0xffff8cfd) + +/* + * does not yet catch signals sent when the child dies. + * in exit.c or in signal.c. + */ + +/* + * This routine will get a word from the user area in the process kernel stack. + */ +static inline int get_stack_long(struct task_struct *task, int offset) +{ + unsigned char *stack; + + stack = (unsigned char *)(task->thread.uregs); + stack += offset; + return (*((int *)stack)); +} + +static inline unsigned long +get_fpu_long(struct task_struct *task, unsigned long addr) +{ + unsigned long tmp; + struct pt_regs *regs; + regs = (struct pt_regs*)((unsigned char *)task + THREAD_SIZE) - 1; + + if (!tsk_used_math(task)) { + if (addr == offsetof(struct user_fpu_struct, fpscr)) { + tmp = FPSCR_INIT; + } else { + tmp = 0xffffffffUL; /* matches initial value in fpu.c */ + } + return tmp; + } + + if (last_task_used_math == task) { + enable_fpu(); + save_fpu(task, regs); + disable_fpu(); + last_task_used_math = 0; + regs->sr |= SR_FD; + } + + tmp = ((long *)&task->thread.fpu)[addr / sizeof(unsigned long)]; + return tmp; +} + +/* + * This routine will put a word into the user area in the process kernel stack. + */ +static inline int put_stack_long(struct task_struct *task, int offset, + unsigned long data) +{ + unsigned char *stack; + + stack = (unsigned char *)(task->thread.uregs); + stack += offset; + *(unsigned long *) stack = data; + return 0; +} + +static inline int +put_fpu_long(struct task_struct *task, unsigned long addr, unsigned long data) +{ + struct pt_regs *regs; + + regs = (struct pt_regs*)((unsigned char *)task + THREAD_SIZE) - 1; + + if (!tsk_used_math(task)) { + fpinit(&task->thread.fpu.hard); + set_stopped_child_used_math(task); + } else if (last_task_used_math == task) { + enable_fpu(); + save_fpu(task, regs); + disable_fpu(); + last_task_used_math = 0; + regs->sr |= SR_FD; + } + + ((long *)&task->thread.fpu)[addr / sizeof(unsigned long)] = data; + return 0; +} + + +long arch_ptrace(struct task_struct *child, long request, long addr, long data) +{ + int ret; + + switch (request) { + /* when I and D space are separate, these will need to be fixed. */ + case PTRACE_PEEKTEXT: /* read word at location addr. */ + case PTRACE_PEEKDATA: + ret = generic_ptrace_peekdata(child, addr, data); + break; + + /* read the word at location addr in the USER area. */ + case PTRACE_PEEKUSR: { + unsigned long tmp; + + ret = -EIO; + if ((addr & 3) || addr < 0) + break; + + if (addr < sizeof(struct pt_regs)) + tmp = get_stack_long(child, addr); + else if ((addr >= offsetof(struct user, fpu)) && + (addr < offsetof(struct user, u_fpvalid))) { + tmp = get_fpu_long(child, addr - offsetof(struct user, fpu)); + } else if (addr == offsetof(struct user, u_fpvalid)) { + tmp = !!tsk_used_math(child); + } else { + break; + } + ret = put_user(tmp, (unsigned long *)data); + break; + } + + /* when I and D space are separate, this will have to be fixed. */ + case PTRACE_POKETEXT: /* write the word at location addr. */ + case PTRACE_POKEDATA: + ret = generic_ptrace_pokedata(child, addr, data); + break; + + case PTRACE_POKEUSR: + /* write the word at location addr in the USER area. We must + disallow any changes to certain SR bits or u_fpvalid, since + this could crash the kernel or result in a security + loophole. */ + ret = -EIO; + if ((addr & 3) || addr < 0) + break; + + if (addr < sizeof(struct pt_regs)) { + /* Ignore change of top 32 bits of SR */ + if (addr == offsetof (struct pt_regs, sr)+4) + { + ret = 0; + break; + } + /* If lower 32 bits of SR, ignore non-user bits */ + if (addr == offsetof (struct pt_regs, sr)) + { + long cursr = get_stack_long(child, addr); + data &= ~(SR_MASK); + data |= (cursr & SR_MASK); + } + ret = put_stack_long(child, addr, data); + } + else if ((addr >= offsetof(struct user, fpu)) && + (addr < offsetof(struct user, u_fpvalid))) { + ret = put_fpu_long(child, addr - offsetof(struct user, fpu), data); + } + break; + + case PTRACE_SYSCALL: /* continue and stop at next (return from) syscall */ + case PTRACE_CONT: { /* restart after signal. */ + ret = -EIO; + if (!valid_signal(data)) + break; + if (request == PTRACE_SYSCALL) + set_tsk_thread_flag(child, TIF_SYSCALL_TRACE); + else + clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE); + child->exit_code = data; + wake_up_process(child); + ret = 0; + break; + } + +/* + * make the child exit. Best I can do is send it a sigkill. + * perhaps it should be put in the status that it wants to + * exit. + */ + case PTRACE_KILL: { + ret = 0; + if (child->exit_state == EXIT_ZOMBIE) /* already dead */ + break; + child->exit_code = SIGKILL; + wake_up_process(child); + break; + } + + case PTRACE_SINGLESTEP: { /* set the trap flag. */ + struct pt_regs *regs; + + ret = -EIO; + if (!valid_signal(data)) + break; + clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE); + if ((child->ptrace & PT_DTRACE) == 0) { + /* Spurious delayed TF traps may occur */ + child->ptrace |= PT_DTRACE; + } + + regs = child->thread.uregs; + + regs->sr |= SR_SSTEP; /* auto-resetting upon exception */ + + child->exit_code = data; + /* give it a chance to run. */ + wake_up_process(child); + ret = 0; + break; + } + + default: + ret = ptrace_request(child, request, addr, data); + break; + } + return ret; +} + +asmlinkage int sh64_ptrace(long request, long pid, long addr, long data) +{ +#define WPC_DBRMODE 0x0d104008 + static int first_call = 1; + + lock_kernel(); + if (first_call) { + /* Set WPC.DBRMODE to 0. This makes all debug events get + * delivered through RESVEC, i.e. into the handlers in entry.S. + * (If the kernel was downloaded using a remote gdb, WPC.DBRMODE + * would normally be left set to 1, which makes debug events get + * delivered through DBRVEC, i.e. into the remote gdb's + * handlers. This prevents ptrace getting them, and confuses + * the remote gdb.) */ + printk("DBRMODE set to 0 to permit native debugging\n"); + poke_real_address_q(WPC_DBRMODE, 0); + first_call = 0; + } + unlock_kernel(); + + return sys_ptrace(request, pid, addr, data); +} + +asmlinkage void syscall_trace(struct pt_regs *regs, int entryexit) +{ + struct task_struct *tsk = current; + + if (unlikely(current->audit_context) && entryexit) + audit_syscall_exit(AUDITSC_RESULT(regs->regs[9]), + regs->regs[9]); + + if (!test_thread_flag(TIF_SYSCALL_TRACE) && + !test_thread_flag(TIF_SINGLESTEP)) + goto out; + if (!(tsk->ptrace & PT_PTRACED)) + goto out; + + ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD) && + !test_thread_flag(TIF_SINGLESTEP) ? 0x80 : 0)); + + /* + * this isn't the same as continuing with a signal, but it will do + * for normal use. strace only continues with a signal if the + * stopping signal is not SIGTRAP. -brl + */ + if (tsk->exit_code) { + send_sig(tsk->exit_code, tsk, 1); + tsk->exit_code = 0; + } + +out: + if (unlikely(current->audit_context) && !entryexit) + audit_syscall_entry(AUDIT_ARCH_SH, regs->regs[1], + regs->regs[2], regs->regs[3], + regs->regs[4], regs->regs[5]); +} + +/* Called with interrupts disabled */ +asmlinkage void do_single_step(unsigned long long vec, struct pt_regs *regs) +{ + /* This is called after a single step exception (DEBUGSS). + There is no need to change the PC, as it is a post-execution + exception, as entry.S does not do anything to the PC for DEBUGSS. + We need to clear the Single Step setting in SR to avoid + continually stepping. */ + local_irq_enable(); + regs->sr &= ~SR_SSTEP; + force_sig(SIGTRAP, current); +} + +/* Called with interrupts disabled */ +asmlinkage void do_software_break_point(unsigned long long vec, + struct pt_regs *regs) +{ + /* We need to forward step the PC, to counteract the backstep done + in signal.c. */ + local_irq_enable(); + force_sig(SIGTRAP, current); + regs->pc += 4; +} + +/* + * Called by kernel/ptrace.c when detaching.. + * + * Make sure single step bits etc are not set. + */ +void ptrace_disable(struct task_struct *child) +{ + /* nothing to do.. */ +} diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c index 4156aac8c27d..855cdf9d85b1 100644 --- a/arch/sh/kernel/setup.c +++ b/arch/sh/kernel/setup.c @@ -26,6 +26,7 @@ #include <asm/uaccess.h> #include <asm/io.h> #include <asm/page.h> +#include <asm/elf.h> #include <asm/sections.h> #include <asm/irq.h> #include <asm/setup.h> @@ -78,12 +79,25 @@ EXPORT_SYMBOL(memory_start); unsigned long memory_end = 0; EXPORT_SYMBOL(memory_end); +int l1i_cache_shape, l1d_cache_shape, l2_cache_shape; + static int __init early_parse_mem(char *p) { unsigned long size; - memory_start = (unsigned long)PAGE_OFFSET+__MEMORY_START; + memory_start = (unsigned long)__va(__MEMORY_START); size = memparse(p, &p); + + if (size > __MEMORY_SIZE) { + static char msg[] __initdata = KERN_ERR + "Using mem= to increase the size of kernel memory " + "is not allowed.\n" + " Recompile the kernel with the correct value for " + "CONFIG_MEMORY_SIZE.\n"; + printk(msg); + return 0; + } + memory_end = memory_start + size; return 0; @@ -243,7 +257,7 @@ void __init setup_arch(char **cmdline_p) data_resource.start = virt_to_phys(_etext); data_resource.end = virt_to_phys(_edata)-1; - memory_start = (unsigned long)PAGE_OFFSET+__MEMORY_START; + memory_start = (unsigned long)__va(__MEMORY_START); if (!memory_end) memory_end = memory_start + __MEMORY_SIZE; @@ -294,20 +308,23 @@ void __init setup_arch(char **cmdline_p) } static const char *cpu_name[] = { + [CPU_SH7203] = "SH7203", [CPU_SH7263] = "SH7263", [CPU_SH7206] = "SH7206", [CPU_SH7619] = "SH7619", [CPU_SH7705] = "SH7705", [CPU_SH7706] = "SH7706", [CPU_SH7707] = "SH7707", [CPU_SH7708] = "SH7708", [CPU_SH7709] = "SH7709", [CPU_SH7710] = "SH7710", [CPU_SH7712] = "SH7712", [CPU_SH7720] = "SH7720", - [CPU_SH7729] = "SH7729", [CPU_SH7750] = "SH7750", - [CPU_SH7750S] = "SH7750S", [CPU_SH7750R] = "SH7750R", - [CPU_SH7751] = "SH7751", [CPU_SH7751R] = "SH7751R", - [CPU_SH7760] = "SH7760", + [CPU_SH7721] = "SH7721", [CPU_SH7729] = "SH7729", + [CPU_SH7750] = "SH7750", [CPU_SH7750S] = "SH7750S", + [CPU_SH7750R] = "SH7750R", [CPU_SH7751] = "SH7751", + [CPU_SH7751R] = "SH7751R", [CPU_SH7760] = "SH7760", [CPU_SH4_202] = "SH4-202", [CPU_SH4_501] = "SH4-501", - [CPU_SH7770] = "SH7770", [CPU_SH7780] = "SH7780", - [CPU_SH7781] = "SH7781", [CPU_SH7343] = "SH7343", - [CPU_SH7785] = "SH7785", [CPU_SH7722] = "SH7722", - [CPU_SHX3] = "SH-X3", [CPU_SH_NONE] = "Unknown" + [CPU_SH7763] = "SH7763", [CPU_SH7770] = "SH7770", + [CPU_SH7780] = "SH7780", [CPU_SH7781] = "SH7781", + [CPU_SH7343] = "SH7343", [CPU_SH7785] = "SH7785", + [CPU_SH7722] = "SH7722", [CPU_SHX3] = "SH-X3", + [CPU_SH5_101] = "SH5-101", [CPU_SH5_103] = "SH5-103", + [CPU_SH_NONE] = "Unknown" }; const char *get_cpu_subtype(struct sh_cpuinfo *c) @@ -410,7 +427,7 @@ static void *c_next(struct seq_file *m, void *v, loff_t *pos) static void c_stop(struct seq_file *m, void *v) { } -struct seq_operations cpuinfo_op = { +const struct seq_operations cpuinfo_op = { .start = c_start, .next = c_next, .stop = c_stop, diff --git a/arch/sh/kernel/sh_ksyms.c b/arch/sh/kernel/sh_ksyms_32.c index e1a6de9088b5..e1a6de9088b5 100644 --- a/arch/sh/kernel/sh_ksyms.c +++ b/arch/sh/kernel/sh_ksyms_32.c diff --git a/arch/sh/kernel/sh_ksyms_64.c b/arch/sh/kernel/sh_ksyms_64.c new file mode 100644 index 000000000000..8004c38d3d37 --- /dev/null +++ b/arch/sh/kernel/sh_ksyms_64.c @@ -0,0 +1,55 @@ +/* + * arch/sh/kernel/sh_ksyms_64.c + * + * Copyright (C) 2000, 2001 Paolo Alberelli + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/rwsem.h> +#include <linux/module.h> +#include <linux/smp.h> +#include <linux/user.h> +#include <linux/elfcore.h> +#include <linux/sched.h> +#include <linux/in6.h> +#include <linux/interrupt.h> +#include <linux/screen_info.h> +#include <asm/semaphore.h> +#include <asm/processor.h> +#include <asm/uaccess.h> +#include <asm/checksum.h> +#include <asm/io.h> +#include <asm/delay.h> +#include <asm/irq.h> + +extern int dump_fpu(struct pt_regs *, elf_fpregset_t *); + +/* platform dependent support */ +EXPORT_SYMBOL(dump_fpu); +EXPORT_SYMBOL(kernel_thread); + +/* Networking helper routines. */ +EXPORT_SYMBOL(csum_partial_copy_nocheck); + +#ifdef CONFIG_VT +EXPORT_SYMBOL(screen_info); +#endif + +EXPORT_SYMBOL(__down); +EXPORT_SYMBOL(__down_trylock); +EXPORT_SYMBOL(__up); +EXPORT_SYMBOL(__put_user_asm_l); +EXPORT_SYMBOL(__get_user_asm_l); +EXPORT_SYMBOL(__copy_user); +EXPORT_SYMBOL(memcpy); +EXPORT_SYMBOL(__udelay); +EXPORT_SYMBOL(__ndelay); + +/* Ugh. These come in from libgcc.a at link time. */ +#define DECLARE_EXPORT(name) extern void name(void);EXPORT_SYMBOL(name) + +DECLARE_EXPORT(__sdivsi3); +DECLARE_EXPORT(__muldi3); +DECLARE_EXPORT(__udivsi3); diff --git a/arch/sh/kernel/signal.c b/arch/sh/kernel/signal_32.c index ca754fd42437..f6b5fbfe75c4 100644 --- a/arch/sh/kernel/signal.c +++ b/arch/sh/kernel/signal_32.c @@ -507,24 +507,6 @@ handle_signal(unsigned long sig, struct k_sigaction *ka, siginfo_t *info, ctrl_inw(regs->pc - 4)); break; } -#ifdef CONFIG_GUSA - } else { - /* gUSA handling */ - preempt_disable(); - - if (regs->regs[15] >= 0xc0000000) { - int offset = (int)regs->regs[15]; - - /* Reset stack pointer: clear critical region mark */ - regs->regs[15] = regs->regs[1]; - if (regs->pc < regs->regs[0]) - /* Go to rewind point #1 */ - regs->pc = regs->regs[0] + offset - - instruction_size(ctrl_inw(regs->pc-4)); - } - - preempt_enable_no_resched(); -#endif } /* Set up the stack frame */ diff --git a/arch/sh/kernel/signal_64.c b/arch/sh/kernel/signal_64.c new file mode 100644 index 000000000000..80bde19d445b --- /dev/null +++ b/arch/sh/kernel/signal_64.c @@ -0,0 +1,751 @@ +/* + * arch/sh/kernel/signal_64.c + * + * Copyright (C) 2000, 2001 Paolo Alberelli + * Copyright (C) 2003 Paul Mundt + * Copyright (C) 2004 Richard Curnow + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/rwsem.h> +#include <linux/sched.h> +#include <linux/mm.h> +#include <linux/smp.h> +#include <linux/kernel.h> +#include <linux/signal.h> +#include <linux/errno.h> +#include <linux/wait.h> +#include <linux/personality.h> +#include <linux/freezer.h> +#include <linux/ptrace.h> +#include <linux/unistd.h> +#include <linux/stddef.h> +#include <asm/ucontext.h> +#include <asm/uaccess.h> +#include <asm/pgtable.h> +#include <asm/cacheflush.h> + +#define REG_RET 9 +#define REG_ARG1 2 +#define REG_ARG2 3 +#define REG_ARG3 4 +#define REG_SP 15 +#define REG_PR 18 +#define REF_REG_RET regs->regs[REG_RET] +#define REF_REG_SP regs->regs[REG_SP] +#define DEREF_REG_PR regs->regs[REG_PR] + +#define DEBUG_SIG 0 + +#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP))) + +asmlinkage int do_signal(struct pt_regs *regs, sigset_t *oldset); + +/* + * Atomically swap in the new signal mask, and wait for a signal. + */ + +asmlinkage int +sys_sigsuspend(old_sigset_t mask, + unsigned long r3, unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7, + struct pt_regs * regs) +{ + sigset_t saveset; + + mask &= _BLOCKABLE; + spin_lock_irq(¤t->sighand->siglock); + saveset = current->blocked; + siginitset(¤t->blocked, mask); + recalc_sigpending(); + spin_unlock_irq(¤t->sighand->siglock); + + REF_REG_RET = -EINTR; + while (1) { + current->state = TASK_INTERRUPTIBLE; + schedule(); + regs->pc += 4; /* because sys_sigreturn decrements the pc */ + if (do_signal(regs, &saveset)) { + /* pc now points at signal handler. Need to decrement + it because entry.S will increment it. */ + regs->pc -= 4; + return -EINTR; + } + } +} + +asmlinkage int +sys_rt_sigsuspend(sigset_t *unewset, size_t sigsetsize, + unsigned long r4, unsigned long r5, unsigned long r6, + unsigned long r7, + struct pt_regs * regs) +{ + sigset_t saveset, newset; + + /* XXX: Don't preclude handling different sized sigset_t's. */ + if (sigsetsize != sizeof(sigset_t)) + return -EINVAL; + + if (copy_from_user(&newset, unewset, sizeof(newset))) + return -EFAULT; + sigdelsetmask(&newset, ~_BLOCKABLE); + spin_lock_irq(¤t->sighand->siglock); + saveset = current->blocked; + current->blocked = newset; + recalc_sigpending(); + spin_unlock_irq(¤t->sighand->siglock); + + REF_REG_RET = -EINTR; + while (1) { + current->state = TASK_INTERRUPTIBLE; + schedule(); + regs->pc += 4; /* because sys_sigreturn decrements the pc */ + if (do_signal(regs, &saveset)) { + /* pc now points at signal handler. Need to decrement + it because entry.S will increment it. */ + regs->pc -= 4; + return -EINTR; + } + } +} + +asmlinkage int +sys_sigaction(int sig, const struct old_sigaction __user *act, + struct old_sigaction __user *oact) +{ + struct k_sigaction new_ka, old_ka; + int ret; + + if (act) { + old_sigset_t mask; + if (!access_ok(VERIFY_READ, act, sizeof(*act)) || + __get_user(new_ka.sa.sa_handler, &act->sa_handler) || + __get_user(new_ka.sa.sa_restorer, &act->sa_restorer)) + return -EFAULT; + __get_user(new_ka.sa.sa_flags, &act->sa_flags); + __get_user(mask, &act->sa_mask); + siginitset(&new_ka.sa.sa_mask, mask); + } + + ret = do_sigaction(sig, act ? &new_ka : NULL, oact ? &old_ka : NULL); + + if (!ret && oact) { + if (!access_ok(VERIFY_WRITE, oact, sizeof(*oact)) || + __put_user(old_ka.sa.sa_handler, &oact->sa_handler) || + __put_user(old_ka.sa.sa_restorer, &oact->sa_restorer)) + return -EFAULT; + __put_user(old_ka.sa.sa_flags, &oact->sa_flags); + __put_user(old_ka.sa.sa_mask.sig[0], &oact->sa_mask); + } + + return ret; +} + +asmlinkage int +sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss, + unsigned long r4, unsigned long r5, unsigned long r6, + unsigned long r7, + struct pt_regs * regs) +{ + return do_sigaltstack(uss, uoss, REF_REG_SP); +} + + +/* + * Do a signal return; undo the signal stack. + */ + +struct sigframe +{ + struct sigcontext sc; + unsigned long extramask[_NSIG_WORDS-1]; + long long retcode[2]; +}; + +struct rt_sigframe +{ + struct siginfo __user *pinfo; + void *puc; + struct siginfo info; + struct ucontext uc; + long long retcode[2]; +}; + +#ifdef CONFIG_SH_FPU +static inline int +restore_sigcontext_fpu(struct pt_regs *regs, struct sigcontext __user *sc) +{ + int err = 0; + int fpvalid; + + err |= __get_user (fpvalid, &sc->sc_fpvalid); + conditional_used_math(fpvalid); + if (! fpvalid) + return err; + + if (current == last_task_used_math) { + last_task_used_math = NULL; + regs->sr |= SR_FD; + } + + err |= __copy_from_user(¤t->thread.fpu.hard, &sc->sc_fpregs[0], + (sizeof(long long) * 32) + (sizeof(int) * 1)); + + return err; +} + +static inline int +setup_sigcontext_fpu(struct pt_regs *regs, struct sigcontext __user *sc) +{ + int err = 0; + int fpvalid; + + fpvalid = !!used_math(); + err |= __put_user(fpvalid, &sc->sc_fpvalid); + if (! fpvalid) + return err; + + if (current == last_task_used_math) { + enable_fpu(); + save_fpu(current, regs); + disable_fpu(); + last_task_used_math = NULL; + regs->sr |= SR_FD; + } + + err |= __copy_to_user(&sc->sc_fpregs[0], ¤t->thread.fpu.hard, + (sizeof(long long) * 32) + (sizeof(int) * 1)); + clear_used_math(); + + return err; +} +#else +static inline int +restore_sigcontext_fpu(struct pt_regs *regs, struct sigcontext __user *sc) +{ + return 0; +} +static inline int +setup_sigcontext_fpu(struct pt_regs *regs, struct sigcontext __user *sc) +{ + return 0; +} +#endif + +static int +restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc, long long *r2_p) +{ + unsigned int err = 0; + unsigned long long current_sr, new_sr; +#define SR_MASK 0xffff8cfd + +#define COPY(x) err |= __get_user(regs->x, &sc->sc_##x) + + COPY(regs[0]); COPY(regs[1]); COPY(regs[2]); COPY(regs[3]); + COPY(regs[4]); COPY(regs[5]); COPY(regs[6]); COPY(regs[7]); + COPY(regs[8]); COPY(regs[9]); COPY(regs[10]); COPY(regs[11]); + COPY(regs[12]); COPY(regs[13]); COPY(regs[14]); COPY(regs[15]); + COPY(regs[16]); COPY(regs[17]); COPY(regs[18]); COPY(regs[19]); + COPY(regs[20]); COPY(regs[21]); COPY(regs[22]); COPY(regs[23]); + COPY(regs[24]); COPY(regs[25]); COPY(regs[26]); COPY(regs[27]); + COPY(regs[28]); COPY(regs[29]); COPY(regs[30]); COPY(regs[31]); + COPY(regs[32]); COPY(regs[33]); COPY(regs[34]); COPY(regs[35]); + COPY(regs[36]); COPY(regs[37]); COPY(regs[38]); COPY(regs[39]); + COPY(regs[40]); COPY(regs[41]); COPY(regs[42]); COPY(regs[43]); + COPY(regs[44]); COPY(regs[45]); COPY(regs[46]); COPY(regs[47]); + COPY(regs[48]); COPY(regs[49]); COPY(regs[50]); COPY(regs[51]); + COPY(regs[52]); COPY(regs[53]); COPY(regs[54]); COPY(regs[55]); + COPY(regs[56]); COPY(regs[57]); COPY(regs[58]); COPY(regs[59]); + COPY(regs[60]); COPY(regs[61]); COPY(regs[62]); + COPY(tregs[0]); COPY(tregs[1]); COPY(tregs[2]); COPY(tregs[3]); + COPY(tregs[4]); COPY(tregs[5]); COPY(tregs[6]); COPY(tregs[7]); + + /* Prevent the signal handler manipulating SR in a way that can + crash the kernel. i.e. only allow S, Q, M, PR, SZ, FR to be + modified */ + current_sr = regs->sr; + err |= __get_user(new_sr, &sc->sc_sr); + regs->sr &= SR_MASK; + regs->sr |= (new_sr & ~SR_MASK); + + COPY(pc); + +#undef COPY + + /* Must do this last in case it sets regs->sr.fd (i.e. after rest of sr + * has been restored above.) */ + err |= restore_sigcontext_fpu(regs, sc); + + regs->syscall_nr = -1; /* disable syscall checks */ + err |= __get_user(*r2_p, &sc->sc_regs[REG_RET]); + return err; +} + +asmlinkage int sys_sigreturn(unsigned long r2, unsigned long r3, + unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7, + struct pt_regs * regs) +{ + struct sigframe __user *frame = (struct sigframe __user *) (long) REF_REG_SP; + sigset_t set; + long long ret; + + if (!access_ok(VERIFY_READ, frame, sizeof(*frame))) + goto badframe; + + if (__get_user(set.sig[0], &frame->sc.oldmask) + || (_NSIG_WORDS > 1 + && __copy_from_user(&set.sig[1], &frame->extramask, + sizeof(frame->extramask)))) + goto badframe; + + sigdelsetmask(&set, ~_BLOCKABLE); + + spin_lock_irq(¤t->sighand->siglock); + current->blocked = set; + recalc_sigpending(); + spin_unlock_irq(¤t->sighand->siglock); + + if (restore_sigcontext(regs, &frame->sc, &ret)) + goto badframe; + regs->pc -= 4; + + return (int) ret; + +badframe: + force_sig(SIGSEGV, current); + return 0; +} + +asmlinkage int sys_rt_sigreturn(unsigned long r2, unsigned long r3, + unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7, + struct pt_regs * regs) +{ + struct rt_sigframe __user *frame = (struct rt_sigframe __user *) (long) REF_REG_SP; + sigset_t set; + stack_t __user st; + long long ret; + + if (!access_ok(VERIFY_READ, frame, sizeof(*frame))) + goto badframe; + + if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set))) + goto badframe; + + sigdelsetmask(&set, ~_BLOCKABLE); + spin_lock_irq(¤t->sighand->siglock); + current->blocked = set; + recalc_sigpending(); + spin_unlock_irq(¤t->sighand->siglock); + + if (restore_sigcontext(regs, &frame->uc.uc_mcontext, &ret)) + goto badframe; + regs->pc -= 4; + + if (__copy_from_user(&st, &frame->uc.uc_stack, sizeof(st))) + goto badframe; + /* It is more difficult to avoid calling this function than to + call it and ignore errors. */ + do_sigaltstack(&st, NULL, REF_REG_SP); + + return (int) ret; + +badframe: + force_sig(SIGSEGV, current); + return 0; +} + +/* + * Set up a signal frame. + */ + +static int +setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs, + unsigned long mask) +{ + int err = 0; + + /* Do this first, otherwise is this sets sr->fd, that value isn't preserved. */ + err |= setup_sigcontext_fpu(regs, sc); + +#define COPY(x) err |= __put_user(regs->x, &sc->sc_##x) + + COPY(regs[0]); COPY(regs[1]); COPY(regs[2]); COPY(regs[3]); + COPY(regs[4]); COPY(regs[5]); COPY(regs[6]); COPY(regs[7]); + COPY(regs[8]); COPY(regs[9]); COPY(regs[10]); COPY(regs[11]); + COPY(regs[12]); COPY(regs[13]); COPY(regs[14]); COPY(regs[15]); + COPY(regs[16]); COPY(regs[17]); COPY(regs[18]); COPY(regs[19]); + COPY(regs[20]); COPY(regs[21]); COPY(regs[22]); COPY(regs[23]); + COPY(regs[24]); COPY(regs[25]); COPY(regs[26]); COPY(regs[27]); + COPY(regs[28]); COPY(regs[29]); COPY(regs[30]); COPY(regs[31]); + COPY(regs[32]); COPY(regs[33]); COPY(regs[34]); COPY(regs[35]); + COPY(regs[36]); COPY(regs[37]); COPY(regs[38]); COPY(regs[39]); + COPY(regs[40]); COPY(regs[41]); COPY(regs[42]); COPY(regs[43]); + COPY(regs[44]); COPY(regs[45]); COPY(regs[46]); COPY(regs[47]); + COPY(regs[48]); COPY(regs[49]); COPY(regs[50]); COPY(regs[51]); + COPY(regs[52]); COPY(regs[53]); COPY(regs[54]); COPY(regs[55]); + COPY(regs[56]); COPY(regs[57]); COPY(regs[58]); COPY(regs[59]); + COPY(regs[60]); COPY(regs[61]); COPY(regs[62]); + COPY(tregs[0]); COPY(tregs[1]); COPY(tregs[2]); COPY(tregs[3]); + COPY(tregs[4]); COPY(tregs[5]); COPY(tregs[6]); COPY(tregs[7]); + COPY(sr); COPY(pc); + +#undef COPY + + err |= __put_user(mask, &sc->oldmask); + + return err; +} + +/* + * Determine which stack to use.. + */ +static inline void __user * +get_sigframe(struct k_sigaction *ka, unsigned long sp, size_t frame_size) +{ + if ((ka->sa.sa_flags & SA_ONSTACK) != 0 && ! sas_ss_flags(sp)) + sp = current->sas_ss_sp + current->sas_ss_size; + + return (void __user *)((sp - frame_size) & -8ul); +} + +void sa_default_restorer(void); /* See comments below */ +void sa_default_rt_restorer(void); /* See comments below */ + +static void setup_frame(int sig, struct k_sigaction *ka, + sigset_t *set, struct pt_regs *regs) +{ + struct sigframe __user *frame; + int err = 0; + int signal; + + frame = get_sigframe(ka, regs->regs[REG_SP], sizeof(*frame)); + + if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame))) + goto give_sigsegv; + + signal = current_thread_info()->exec_domain + && current_thread_info()->exec_domain->signal_invmap + && sig < 32 + ? current_thread_info()->exec_domain->signal_invmap[sig] + : sig; + + err |= setup_sigcontext(&frame->sc, regs, set->sig[0]); + + /* Give up earlier as i386, in case */ + if (err) + goto give_sigsegv; + + if (_NSIG_WORDS > 1) { + err |= __copy_to_user(frame->extramask, &set->sig[1], + sizeof(frame->extramask)); } + + /* Give up earlier as i386, in case */ + if (err) + goto give_sigsegv; + + /* Set up to return from userspace. If provided, use a stub + already in userspace. */ + if (ka->sa.sa_flags & SA_RESTORER) { + DEREF_REG_PR = (unsigned long) ka->sa.sa_restorer | 0x1; + + /* + * On SH5 all edited pointers are subject to NEFF + */ + DEREF_REG_PR = (DEREF_REG_PR & NEFF_SIGN) ? + (DEREF_REG_PR | NEFF_MASK) : DEREF_REG_PR; + } else { + /* + * Different approach on SH5. + * . Endianness independent asm code gets placed in entry.S . + * This is limited to four ASM instructions corresponding + * to two long longs in size. + * . err checking is done on the else branch only + * . flush_icache_range() is called upon __put_user() only + * . all edited pointers are subject to NEFF + * . being code, linker turns ShMedia bit on, always + * dereference index -1. + */ + DEREF_REG_PR = (unsigned long) frame->retcode | 0x01; + DEREF_REG_PR = (DEREF_REG_PR & NEFF_SIGN) ? + (DEREF_REG_PR | NEFF_MASK) : DEREF_REG_PR; + + if (__copy_to_user(frame->retcode, + (unsigned long long)sa_default_restorer & (~1), 16) != 0) + goto give_sigsegv; + + /* Cohere the trampoline with the I-cache. */ + flush_cache_sigtramp(DEREF_REG_PR-1); + } + + /* + * Set up registers for signal handler. + * All edited pointers are subject to NEFF. + */ + regs->regs[REG_SP] = (unsigned long) frame; + regs->regs[REG_SP] = (regs->regs[REG_SP] & NEFF_SIGN) ? + (regs->regs[REG_SP] | NEFF_MASK) : regs->regs[REG_SP]; + regs->regs[REG_ARG1] = signal; /* Arg for signal handler */ + + /* FIXME: + The glibc profiling support for SH-5 needs to be passed a sigcontext + so it can retrieve the PC. At some point during 2003 the glibc + support was changed to receive the sigcontext through the 2nd + argument, but there are still versions of libc.so in use that use + the 3rd argument. Until libc.so is stabilised, pass the sigcontext + through both 2nd and 3rd arguments. + */ + + regs->regs[REG_ARG2] = (unsigned long long)(unsigned long)(signed long)&frame->sc; + regs->regs[REG_ARG3] = (unsigned long long)(unsigned long)(signed long)&frame->sc; + + regs->pc = (unsigned long) ka->sa.sa_handler; + regs->pc = (regs->pc & NEFF_SIGN) ? (regs->pc | NEFF_MASK) : regs->pc; + + set_fs(USER_DS); + +#if DEBUG_SIG + /* Broken %016Lx */ + printk("SIG deliver (#%d,%s:%d): sp=%p pc=%08Lx%08Lx link=%08Lx%08Lx\n", + signal, + current->comm, current->pid, frame, + regs->pc >> 32, regs->pc & 0xffffffff, + DEREF_REG_PR >> 32, DEREF_REG_PR & 0xffffffff); +#endif + + return; + +give_sigsegv: + force_sigsegv(sig, current); +} + +static void setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, + sigset_t *set, struct pt_regs *regs) +{ + struct rt_sigframe __user *frame; + int err = 0; + int signal; + + frame = get_sigframe(ka, regs->regs[REG_SP], sizeof(*frame)); + + if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame))) + goto give_sigsegv; + + signal = current_thread_info()->exec_domain + && current_thread_info()->exec_domain->signal_invmap + && sig < 32 + ? current_thread_info()->exec_domain->signal_invmap[sig] + : sig; + + err |= __put_user(&frame->info, &frame->pinfo); + err |= __put_user(&frame->uc, &frame->puc); + err |= copy_siginfo_to_user(&frame->info, info); + + /* Give up earlier as i386, in case */ + if (err) + goto give_sigsegv; + + /* Create the ucontext. */ + err |= __put_user(0, &frame->uc.uc_flags); + err |= __put_user(0, &frame->uc.uc_link); + err |= __put_user((void *)current->sas_ss_sp, + &frame->uc.uc_stack.ss_sp); + err |= __put_user(sas_ss_flags(regs->regs[REG_SP]), + &frame->uc.uc_stack.ss_flags); + err |= __put_user(current->sas_ss_size, &frame->uc.uc_stack.ss_size); + err |= setup_sigcontext(&frame->uc.uc_mcontext, + regs, set->sig[0]); + err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set)); + + /* Give up earlier as i386, in case */ + if (err) + goto give_sigsegv; + + /* Set up to return from userspace. If provided, use a stub + already in userspace. */ + if (ka->sa.sa_flags & SA_RESTORER) { + DEREF_REG_PR = (unsigned long) ka->sa.sa_restorer | 0x1; + + /* + * On SH5 all edited pointers are subject to NEFF + */ + DEREF_REG_PR = (DEREF_REG_PR & NEFF_SIGN) ? + (DEREF_REG_PR | NEFF_MASK) : DEREF_REG_PR; + } else { + /* + * Different approach on SH5. + * . Endianness independent asm code gets placed in entry.S . + * This is limited to four ASM instructions corresponding + * to two long longs in size. + * . err checking is done on the else branch only + * . flush_icache_range() is called upon __put_user() only + * . all edited pointers are subject to NEFF + * . being code, linker turns ShMedia bit on, always + * dereference index -1. + */ + + DEREF_REG_PR = (unsigned long) frame->retcode | 0x01; + DEREF_REG_PR = (DEREF_REG_PR & NEFF_SIGN) ? + (DEREF_REG_PR | NEFF_MASK) : DEREF_REG_PR; + + if (__copy_to_user(frame->retcode, + (unsigned long long)sa_default_rt_restorer & (~1), 16) != 0) + goto give_sigsegv; + + flush_icache_range(DEREF_REG_PR-1, DEREF_REG_PR-1+15); + } + + /* + * Set up registers for signal handler. + * All edited pointers are subject to NEFF. + */ + regs->regs[REG_SP] = (unsigned long) frame; + regs->regs[REG_SP] = (regs->regs[REG_SP] & NEFF_SIGN) ? + (regs->regs[REG_SP] | NEFF_MASK) : regs->regs[REG_SP]; + regs->regs[REG_ARG1] = signal; /* Arg for signal handler */ + regs->regs[REG_ARG2] = (unsigned long long)(unsigned long)(signed long)&frame->info; + regs->regs[REG_ARG3] = (unsigned long long)(unsigned long)(signed long)&frame->uc.uc_mcontext; + regs->pc = (unsigned long) ka->sa.sa_handler; + regs->pc = (regs->pc & NEFF_SIGN) ? (regs->pc | NEFF_MASK) : regs->pc; + + set_fs(USER_DS); + +#if DEBUG_SIG + /* Broken %016Lx */ + printk("SIG deliver (#%d,%s:%d): sp=%p pc=%08Lx%08Lx link=%08Lx%08Lx\n", + signal, + current->comm, current->pid, frame, + regs->pc >> 32, regs->pc & 0xffffffff, + DEREF_REG_PR >> 32, DEREF_REG_PR & 0xffffffff); +#endif + + return; + +give_sigsegv: + force_sigsegv(sig, current); +} + +/* + * OK, we're invoking a handler + */ + +static void +handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka, + sigset_t *oldset, struct pt_regs * regs) +{ + /* Are we from a system call? */ + if (regs->syscall_nr >= 0) { + /* If so, check system call restarting.. */ + switch (regs->regs[REG_RET]) { + case -ERESTART_RESTARTBLOCK: + case -ERESTARTNOHAND: + regs->regs[REG_RET] = -EINTR; + break; + + case -ERESTARTSYS: + if (!(ka->sa.sa_flags & SA_RESTART)) { + regs->regs[REG_RET] = -EINTR; + break; + } + /* fallthrough */ + case -ERESTARTNOINTR: + /* Decode syscall # */ + regs->regs[REG_RET] = regs->syscall_nr; + regs->pc -= 4; + } + } + + /* Set up the stack frame */ + if (ka->sa.sa_flags & SA_SIGINFO) + setup_rt_frame(sig, ka, info, oldset, regs); + else + setup_frame(sig, ka, oldset, regs); + + spin_lock_irq(¤t->sighand->siglock); + sigorsets(¤t->blocked,¤t->blocked,&ka->sa.sa_mask); + if (!(ka->sa.sa_flags & SA_NODEFER)) + sigaddset(¤t->blocked,sig); + recalc_sigpending(); + spin_unlock_irq(¤t->sighand->siglock); +} + +/* + * Note that 'init' is a special process: it doesn't get signals it doesn't + * want to handle. Thus you cannot kill init even with a SIGKILL even by + * mistake. + * + * Note that we go through the signals twice: once to check the signals that + * the kernel can handle, and then we build all the user-level signal handling + * stack-frames in one go after that. + */ +int do_signal(struct pt_regs *regs, sigset_t *oldset) +{ + siginfo_t info; + int signr; + struct k_sigaction ka; + + /* + * We want the common case to go fast, which + * is why we may in certain cases get here from + * kernel mode. Just return without doing anything + * if so. + */ + if (!user_mode(regs)) + return 1; + + if (try_to_freeze()) + goto no_signal; + + if (test_thread_flag(TIF_RESTORE_SIGMASK)) + oldset = ¤t->saved_sigmask; + else if (!oldset) + oldset = ¤t->blocked; + + signr = get_signal_to_deliver(&info, &ka, regs, 0); + + if (signr > 0) { + /* Whee! Actually deliver the signal. */ + handle_signal(signr, &info, &ka, oldset, regs); + + /* + * If a signal was successfully delivered, the saved sigmask + * is in its frame, and we can clear the TIF_RESTORE_SIGMASK + * flag. + */ + if (test_thread_flag(TIF_RESTORE_SIGMASK)) + clear_thread_flag(TIF_RESTORE_SIGMASK); + + return 1; + } + +no_signal: + /* Did we come from a system call? */ + if (regs->syscall_nr >= 0) { + /* Restart the system call - no handlers present */ + switch (regs->regs[REG_RET]) { + case -ERESTARTNOHAND: + case -ERESTARTSYS: + case -ERESTARTNOINTR: + /* Decode Syscall # */ + regs->regs[REG_RET] = regs->syscall_nr; + regs->pc -= 4; + break; + + case -ERESTART_RESTARTBLOCK: + regs->regs[REG_RET] = __NR_restart_syscall; + regs->pc -= 4; + break; + } + } + + /* No signal to deliver -- put the saved sigmask back */ + if (test_thread_flag(TIF_RESTORE_SIGMASK)) { + clear_thread_flag(TIF_RESTORE_SIGMASK); + sigprocmask(SIG_SETMASK, ¤t->saved_sigmask, NULL); + } + + return 0; +} diff --git a/arch/sh/kernel/sys_sh.c b/arch/sh/kernel/sys_sh.c index d545a686a201..59cd2859ce9b 100644 --- a/arch/sh/kernel/sys_sh.c +++ b/arch/sh/kernel/sys_sh.c @@ -7,7 +7,6 @@ * * Taken from i386 version. */ - #include <linux/errno.h> #include <linux/sched.h> #include <linux/mm.h> @@ -27,28 +26,7 @@ #include <asm/uaccess.h> #include <asm/unistd.h> -/* - * sys_pipe() is the normal C calling standard for creating - * a pipe. It's not the way Unix traditionally does this, though. - */ -asmlinkage int sys_pipe(unsigned long r4, unsigned long r5, - unsigned long r6, unsigned long r7, - struct pt_regs __regs) -{ - struct pt_regs *regs = RELOC_HIDE(&__regs, 0); - int fd[2]; - int error; - - error = do_pipe(fd); - if (!error) { - regs->regs[1] = fd[1]; - return fd[0]; - } - return error; -} - unsigned long shm_align_mask = PAGE_SIZE - 1; /* Sane caches */ - EXPORT_SYMBOL(shm_align_mask); #ifdef CONFIG_MMU @@ -140,7 +118,7 @@ full_search: #endif /* CONFIG_MMU */ static inline long -do_mmap2(unsigned long addr, unsigned long len, unsigned long prot, +do_mmap2(unsigned long addr, unsigned long len, unsigned long prot, unsigned long flags, int fd, unsigned long pgoff) { int error = -EBADF; @@ -195,12 +173,13 @@ asmlinkage int sys_ipc(uint call, int first, int second, if (call <= SEMCTL) switch (call) { case SEMOP: - return sys_semtimedop(first, (struct sembuf __user *)ptr, + return sys_semtimedop(first, + (struct sembuf __user *)ptr, second, NULL); case SEMTIMEDOP: - return sys_semtimedop(first, (struct sembuf __user *)ptr, - second, - (const struct timespec __user *)fifth); + return sys_semtimedop(first, + (struct sembuf __user *)ptr, second, + (const struct timespec __user *)fifth); case SEMGET: return sys_semget (first, second, third); case SEMCTL: { @@ -215,25 +194,28 @@ asmlinkage int sys_ipc(uint call, int first, int second, return -EINVAL; } - if (call <= MSGCTL) + if (call <= MSGCTL) switch (call) { case MSGSND: - return sys_msgsnd (first, (struct msgbuf __user *) ptr, + return sys_msgsnd (first, (struct msgbuf __user *) ptr, second, third); case MSGRCV: switch (version) { - case 0: { + case 0: + { struct ipc_kludge tmp; + if (!ptr) return -EINVAL; - + if (copy_from_user(&tmp, - (struct ipc_kludge __user *) ptr, + (struct ipc_kludge __user *) ptr, sizeof (tmp))) return -EFAULT; + return sys_msgrcv (first, tmp.msgp, second, tmp.msgtyp, third); - } + } default: return sys_msgrcv (first, (struct msgbuf __user *) ptr, @@ -247,7 +229,7 @@ asmlinkage int sys_ipc(uint call, int first, int second, default: return -EINVAL; } - if (call <= SHMCTL) + if (call <= SHMCTL) switch (call) { case SHMAT: switch (version) { @@ -265,7 +247,7 @@ asmlinkage int sys_ipc(uint call, int first, int second, return do_shmat (first, (char __user *) ptr, second, (ulong *) third); } - case SHMDT: + case SHMDT: return sys_shmdt ((char __user *)ptr); case SHMGET: return sys_shmget (first, second, third); @@ -275,7 +257,7 @@ asmlinkage int sys_ipc(uint call, int first, int second, default: return -EINVAL; } - + return -EINVAL; } @@ -289,49 +271,3 @@ asmlinkage int sys_uname(struct old_utsname * name) up_read(&uts_sem); return err?-EFAULT:0; } - -asmlinkage ssize_t sys_pread_wrapper(unsigned int fd, char * buf, - size_t count, long dummy, loff_t pos) -{ - return sys_pread64(fd, buf, count, pos); -} - -asmlinkage ssize_t sys_pwrite_wrapper(unsigned int fd, const char * buf, - size_t count, long dummy, loff_t pos) -{ - return sys_pwrite64(fd, buf, count, pos); -} - -asmlinkage int sys_fadvise64_64_wrapper(int fd, u32 offset0, u32 offset1, - u32 len0, u32 len1, int advice) -{ -#ifdef __LITTLE_ENDIAN__ - return sys_fadvise64_64(fd, (u64)offset1 << 32 | offset0, - (u64)len1 << 32 | len0, advice); -#else - return sys_fadvise64_64(fd, (u64)offset0 << 32 | offset1, - (u64)len0 << 32 | len1, advice); -#endif -} - -#if defined(CONFIG_CPU_SH2) || defined(CONFIG_CPU_SH2A) -#define SYSCALL_ARG3 "trapa #0x23" -#else -#define SYSCALL_ARG3 "trapa #0x13" -#endif - -/* - * Do a system call from kernel instead of calling sys_execve so we - * end up with proper pt_regs. - */ -int kernel_execve(const char *filename, char *const argv[], char *const envp[]) -{ - register long __sc0 __asm__ ("r3") = __NR_execve; - register long __sc4 __asm__ ("r4") = (long) filename; - register long __sc5 __asm__ ("r5") = (long) argv; - register long __sc6 __asm__ ("r6") = (long) envp; - __asm__ __volatile__ (SYSCALL_ARG3 : "=z" (__sc0) - : "0" (__sc0), "r" (__sc4), "r" (__sc5), "r" (__sc6) - : "memory"); - return __sc0; -} diff --git a/arch/sh/kernel/sys_sh32.c b/arch/sh/kernel/sys_sh32.c new file mode 100644 index 000000000000..125e493ead82 --- /dev/null +++ b/arch/sh/kernel/sys_sh32.c @@ -0,0 +1,84 @@ +#include <linux/errno.h> +#include <linux/sched.h> +#include <linux/mm.h> +#include <linux/smp.h> +#include <linux/sem.h> +#include <linux/msg.h> +#include <linux/shm.h> +#include <linux/stat.h> +#include <linux/syscalls.h> +#include <linux/mman.h> +#include <linux/file.h> +#include <linux/utsname.h> +#include <linux/module.h> +#include <linux/fs.h> +#include <linux/ipc.h> +#include <asm/cacheflush.h> +#include <asm/uaccess.h> +#include <asm/unistd.h> + +/* + * sys_pipe() is the normal C calling standard for creating + * a pipe. It's not the way Unix traditionally does this, though. + */ +asmlinkage int sys_pipe(unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7, + struct pt_regs __regs) +{ + struct pt_regs *regs = RELOC_HIDE(&__regs, 0); + int fd[2]; + int error; + + error = do_pipe(fd); + if (!error) { + regs->regs[1] = fd[1]; + return fd[0]; + } + return error; +} + +asmlinkage ssize_t sys_pread_wrapper(unsigned int fd, char * buf, + size_t count, long dummy, loff_t pos) +{ + return sys_pread64(fd, buf, count, pos); +} + +asmlinkage ssize_t sys_pwrite_wrapper(unsigned int fd, const char * buf, + size_t count, long dummy, loff_t pos) +{ + return sys_pwrite64(fd, buf, count, pos); +} + +asmlinkage int sys_fadvise64_64_wrapper(int fd, u32 offset0, u32 offset1, + u32 len0, u32 len1, int advice) +{ +#ifdef __LITTLE_ENDIAN__ + return sys_fadvise64_64(fd, (u64)offset1 << 32 | offset0, + (u64)len1 << 32 | len0, advice); +#else + return sys_fadvise64_64(fd, (u64)offset0 << 32 | offset1, + (u64)len0 << 32 | len1, advice); +#endif +} + +#if defined(CONFIG_CPU_SH2) || defined(CONFIG_CPU_SH2A) +#define SYSCALL_ARG3 "trapa #0x23" +#else +#define SYSCALL_ARG3 "trapa #0x13" +#endif + +/* + * Do a system call from kernel instead of calling sys_execve so we + * end up with proper pt_regs. + */ +int kernel_execve(const char *filename, char *const argv[], char *const envp[]) +{ + register long __sc0 __asm__ ("r3") = __NR_execve; + register long __sc4 __asm__ ("r4") = (long) filename; + register long __sc5 __asm__ ("r5") = (long) argv; + register long __sc6 __asm__ ("r6") = (long) envp; + __asm__ __volatile__ (SYSCALL_ARG3 : "=z" (__sc0) + : "0" (__sc0), "r" (__sc4), "r" (__sc5), "r" (__sc6) + : "memory"); + return __sc0; +} diff --git a/arch/sh/kernel/sys_sh64.c b/arch/sh/kernel/sys_sh64.c new file mode 100644 index 000000000000..578004d71e02 --- /dev/null +++ b/arch/sh/kernel/sys_sh64.c @@ -0,0 +1,66 @@ +/* + * arch/sh/kernel/sys_sh64.c + * + * Copyright (C) 2000, 2001 Paolo Alberelli + * + * This file contains various random system calls that + * have a non-standard calling sequence on the Linux/SH5 + * platform. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/errno.h> +#include <linux/rwsem.h> +#include <linux/sched.h> +#include <linux/mm.h> +#include <linux/fs.h> +#include <linux/smp.h> +#include <linux/sem.h> +#include <linux/msg.h> +#include <linux/shm.h> +#include <linux/stat.h> +#include <linux/mman.h> +#include <linux/file.h> +#include <linux/utsname.h> +#include <linux/syscalls.h> +#include <linux/ipc.h> +#include <asm/uaccess.h> +#include <asm/ptrace.h> +#include <asm/unistd.h> + +/* + * sys_pipe() is the normal C calling standard for creating + * a pipe. It's not the way Unix traditionally does this, though. + */ +asmlinkage int sys_pipe(unsigned long * fildes) +{ + int fd[2]; + int error; + + error = do_pipe(fd); + if (!error) { + if (copy_to_user(fildes, fd, 2*sizeof(int))) + error = -EFAULT; + } + return error; +} + +/* + * Do a system call from kernel instead of calling sys_execve so we + * end up with proper pt_regs. + */ +int kernel_execve(const char *filename, char *const argv[], char *const envp[]) +{ + register unsigned long __sc0 __asm__ ("r9") = ((0x13 << 16) | __NR_execve); + register unsigned long __sc2 __asm__ ("r2") = (unsigned long) filename; + register unsigned long __sc3 __asm__ ("r3") = (unsigned long) argv; + register unsigned long __sc4 __asm__ ("r4") = (unsigned long) envp; + __asm__ __volatile__ ("trapa %1 !\t\t\t execve(%2,%3,%4)" + : "=r" (__sc0) + : "r" (__sc0), "r" (__sc2), "r" (__sc3), "r" (__sc4) ); + __asm__ __volatile__ ("!dummy %0 %1 %2 %3" + : : "r" (__sc0), "r" (__sc2), "r" (__sc3), "r" (__sc4) : "memory"); + return __sc0; +} diff --git a/arch/sh/kernel/syscalls.S b/arch/sh/kernel/syscalls_32.S index 10bec45415ba..10bec45415ba 100644 --- a/arch/sh/kernel/syscalls.S +++ b/arch/sh/kernel/syscalls_32.S diff --git a/arch/sh/kernel/syscalls_64.S b/arch/sh/kernel/syscalls_64.S new file mode 100644 index 000000000000..98a93efe3691 --- /dev/null +++ b/arch/sh/kernel/syscalls_64.S @@ -0,0 +1,381 @@ +/* + * arch/sh/kernel/syscalls_64.S + * + * Copyright (C) 2000, 2001 Paolo Alberelli + * Copyright (C) 2004 - 2007 Paul Mundt + * Copyright (C) 2003, 2004 Richard Curnow + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include <linux/sys.h> + + .section .data, "aw" + .balign 32 + +/* + * System calls jump table + */ + .globl sys_call_table +sys_call_table: + .long sys_restart_syscall /* 0 - old "setup()" system call */ + .long sys_exit + .long sys_fork + .long sys_read + .long sys_write + .long sys_open /* 5 */ + .long sys_close + .long sys_waitpid + .long sys_creat + .long sys_link + .long sys_unlink /* 10 */ + .long sys_execve + .long sys_chdir + .long sys_time + .long sys_mknod + .long sys_chmod /* 15 */ + .long sys_lchown16 + .long sys_ni_syscall /* old break syscall holder */ + .long sys_stat + .long sys_lseek + .long sys_getpid /* 20 */ + .long sys_mount + .long sys_oldumount + .long sys_setuid16 + .long sys_getuid16 + .long sys_stime /* 25 */ + .long sh64_ptrace + .long sys_alarm + .long sys_fstat + .long sys_pause + .long sys_utime /* 30 */ + .long sys_ni_syscall /* old stty syscall holder */ + .long sys_ni_syscall /* old gtty syscall holder */ + .long sys_access + .long sys_nice + .long sys_ni_syscall /* 35 */ /* old ftime syscall holder */ + .long sys_sync + .long sys_kill + .long sys_rename + .long sys_mkdir + .long sys_rmdir /* 40 */ + .long sys_dup + .long sys_pipe + .long sys_times + .long sys_ni_syscall /* old prof syscall holder */ + .long sys_brk /* 45 */ + .long sys_setgid16 + .long sys_getgid16 + .long sys_signal + .long sys_geteuid16 + .long sys_getegid16 /* 50 */ + .long sys_acct + .long sys_umount /* recycled never used phys( */ + .long sys_ni_syscall /* old lock syscall holder */ + .long sys_ioctl + .long sys_fcntl /* 55 */ + .long sys_ni_syscall /* old mpx syscall holder */ + .long sys_setpgid + .long sys_ni_syscall /* old ulimit syscall holder */ + .long sys_ni_syscall /* sys_olduname */ + .long sys_umask /* 60 */ + .long sys_chroot + .long sys_ustat + .long sys_dup2 + .long sys_getppid + .long sys_getpgrp /* 65 */ + .long sys_setsid + .long sys_sigaction + .long sys_sgetmask + .long sys_ssetmask + .long sys_setreuid16 /* 70 */ + .long sys_setregid16 + .long sys_sigsuspend + .long sys_sigpending + .long sys_sethostname + .long sys_setrlimit /* 75 */ + .long sys_old_getrlimit + .long sys_getrusage + .long sys_gettimeofday + .long sys_settimeofday + .long sys_getgroups16 /* 80 */ + .long sys_setgroups16 + .long sys_ni_syscall /* sys_oldselect */ + .long sys_symlink + .long sys_lstat + .long sys_readlink /* 85 */ + .long sys_uselib + .long sys_swapon + .long sys_reboot + .long old_readdir + .long old_mmap /* 90 */ + .long sys_munmap + .long sys_truncate + .long sys_ftruncate + .long sys_fchmod + .long sys_fchown16 /* 95 */ + .long sys_getpriority + .long sys_setpriority + .long sys_ni_syscall /* old profil syscall holder */ + .long sys_statfs + .long sys_fstatfs /* 100 */ + .long sys_ni_syscall /* ioperm */ + .long sys_socketcall /* Obsolete implementation of socket syscall */ + .long sys_syslog + .long sys_setitimer + .long sys_getitimer /* 105 */ + .long sys_newstat + .long sys_newlstat + .long sys_newfstat + .long sys_uname + .long sys_ni_syscall /* 110 */ /* iopl */ + .long sys_vhangup + .long sys_ni_syscall /* idle */ + .long sys_ni_syscall /* vm86old */ + .long sys_wait4 + .long sys_swapoff /* 115 */ + .long sys_sysinfo + .long sys_ipc /* Obsolete ipc syscall implementation */ + .long sys_fsync + .long sys_sigreturn + .long sys_clone /* 120 */ + .long sys_setdomainname + .long sys_newuname + .long sys_ni_syscall /* sys_modify_ldt */ + .long sys_adjtimex + .long sys_mprotect /* 125 */ + .long sys_sigprocmask + .long sys_ni_syscall /* old "create_module" */ + .long sys_init_module + .long sys_delete_module + .long sys_ni_syscall /* 130: old "get_kernel_syms" */ + .long sys_quotactl + .long sys_getpgid + .long sys_fchdir + .long sys_bdflush + .long sys_sysfs /* 135 */ + .long sys_personality + .long sys_ni_syscall /* for afs_syscall */ + .long sys_setfsuid16 + .long sys_setfsgid16 + .long sys_llseek /* 140 */ + .long sys_getdents + .long sys_select + .long sys_flock + .long sys_msync + .long sys_readv /* 145 */ + .long sys_writev + .long sys_getsid + .long sys_fdatasync + .long sys_sysctl + .long sys_mlock /* 150 */ + .long sys_munlock + .long sys_mlockall + .long sys_munlockall + .long sys_sched_setparam + .long sys_sched_getparam /* 155 */ + .long sys_sched_setscheduler + .long sys_sched_getscheduler + .long sys_sched_yield + .long sys_sched_get_priority_max + .long sys_sched_get_priority_min /* 160 */ + .long sys_sched_rr_get_interval + .long sys_nanosleep + .long sys_mremap + .long sys_setresuid16 + .long sys_getresuid16 /* 165 */ + .long sys_ni_syscall /* vm86 */ + .long sys_ni_syscall /* old "query_module" */ + .long sys_poll + .long sys_nfsservctl + .long sys_setresgid16 /* 170 */ + .long sys_getresgid16 + .long sys_prctl + .long sys_rt_sigreturn + .long sys_rt_sigaction + .long sys_rt_sigprocmask /* 175 */ + .long sys_rt_sigpending + .long sys_rt_sigtimedwait + .long sys_rt_sigqueueinfo + .long sys_rt_sigsuspend + .long sys_pread64 /* 180 */ + .long sys_pwrite64 + .long sys_chown16 + .long sys_getcwd + .long sys_capget + .long sys_capset /* 185 */ + .long sys_sigaltstack + .long sys_sendfile + .long sys_ni_syscall /* streams1 */ + .long sys_ni_syscall /* streams2 */ + .long sys_vfork /* 190 */ + .long sys_getrlimit + .long sys_mmap2 + .long sys_truncate64 + .long sys_ftruncate64 + .long sys_stat64 /* 195 */ + .long sys_lstat64 + .long sys_fstat64 + .long sys_lchown + .long sys_getuid + .long sys_getgid /* 200 */ + .long sys_geteuid + .long sys_getegid + .long sys_setreuid + .long sys_setregid + .long sys_getgroups /* 205 */ + .long sys_setgroups + .long sys_fchown + .long sys_setresuid + .long sys_getresuid + .long sys_setresgid /* 210 */ + .long sys_getresgid + .long sys_chown + .long sys_setuid + .long sys_setgid + .long sys_setfsuid /* 215 */ + .long sys_setfsgid + .long sys_pivot_root + .long sys_mincore + .long sys_madvise + /* Broken-out socket family (maintain backwards compatibility in syscall + numbering with 2.4) */ + .long sys_socket /* 220 */ + .long sys_bind + .long sys_connect + .long sys_listen + .long sys_accept + .long sys_getsockname /* 225 */ + .long sys_getpeername + .long sys_socketpair + .long sys_send + .long sys_sendto + .long sys_recv /* 230*/ + .long sys_recvfrom + .long sys_shutdown + .long sys_setsockopt + .long sys_getsockopt + .long sys_sendmsg /* 235 */ + .long sys_recvmsg + /* Broken-out IPC family (maintain backwards compatibility in syscall + numbering with 2.4) */ + .long sys_semop + .long sys_semget + .long sys_semctl + .long sys_msgsnd /* 240 */ + .long sys_msgrcv + .long sys_msgget + .long sys_msgctl + .long sys_shmat + .long sys_shmdt /* 245 */ + .long sys_shmget + .long sys_shmctl + /* Rest of syscalls listed in 2.4 i386 unistd.h */ + .long sys_getdents64 + .long sys_fcntl64 + .long sys_ni_syscall /* 250 reserved for TUX */ + .long sys_ni_syscall /* Reserved for Security */ + .long sys_gettid + .long sys_readahead + .long sys_setxattr + .long sys_lsetxattr /* 255 */ + .long sys_fsetxattr + .long sys_getxattr + .long sys_lgetxattr + .long sys_fgetxattr + .long sys_listxattr /* 260 */ + .long sys_llistxattr + .long sys_flistxattr + .long sys_removexattr + .long sys_lremovexattr + .long sys_fremovexattr /* 265 */ + .long sys_tkill + .long sys_sendfile64 + .long sys_futex + .long sys_sched_setaffinity + .long sys_sched_getaffinity /* 270 */ + .long sys_ni_syscall + .long sys_ni_syscall + .long sys_io_setup + .long sys_io_destroy + .long sys_io_getevents /* 275 */ + .long sys_io_submit + .long sys_io_cancel + .long sys_fadvise64 + .long sys_ni_syscall + .long sys_exit_group /* 280 */ + /* Rest of new 2.6 syscalls */ + .long sys_lookup_dcookie + .long sys_epoll_create + .long sys_epoll_ctl + .long sys_epoll_wait + .long sys_remap_file_pages /* 285 */ + .long sys_set_tid_address + .long sys_timer_create + .long sys_timer_settime + .long sys_timer_gettime + .long sys_timer_getoverrun /* 290 */ + .long sys_timer_delete + .long sys_clock_settime + .long sys_clock_gettime + .long sys_clock_getres + .long sys_clock_nanosleep /* 295 */ + .long sys_statfs64 + .long sys_fstatfs64 + .long sys_tgkill + .long sys_utimes + .long sys_fadvise64_64 /* 300 */ + .long sys_ni_syscall /* Reserved for vserver */ + .long sys_ni_syscall /* Reserved for mbind */ + .long sys_ni_syscall /* get_mempolicy */ + .long sys_ni_syscall /* set_mempolicy */ + .long sys_mq_open /* 305 */ + .long sys_mq_unlink + .long sys_mq_timedsend + .long sys_mq_timedreceive + .long sys_mq_notify + .long sys_mq_getsetattr /* 310 */ + .long sys_ni_syscall /* Reserved for kexec */ + .long sys_waitid + .long sys_add_key + .long sys_request_key + .long sys_keyctl /* 315 */ + .long sys_ioprio_set + .long sys_ioprio_get + .long sys_inotify_init + .long sys_inotify_add_watch + .long sys_inotify_rm_watch /* 320 */ + .long sys_ni_syscall + .long sys_migrate_pages + .long sys_openat + .long sys_mkdirat + .long sys_mknodat /* 325 */ + .long sys_fchownat + .long sys_futimesat + .long sys_fstatat64 + .long sys_unlinkat + .long sys_renameat /* 330 */ + .long sys_linkat + .long sys_symlinkat + .long sys_readlinkat + .long sys_fchmodat + .long sys_faccessat /* 335 */ + .long sys_pselect6 + .long sys_ppoll + .long sys_unshare + .long sys_set_robust_list + .long sys_get_robust_list /* 340 */ + .long sys_splice + .long sys_sync_file_range + .long sys_tee + .long sys_vmsplice + .long sys_move_pages /* 345 */ + .long sys_getcpu + .long sys_epoll_pwait + .long sys_utimensat + .long sys_signalfd + .long sys_timerfd /* 350 */ + .long sys_eventfd + .long sys_fallocate diff --git a/arch/sh/kernel/time.c b/arch/sh/kernel/time_32.c index 2bc04bfee738..2bc04bfee738 100644 --- a/arch/sh/kernel/time.c +++ b/arch/sh/kernel/time_32.c diff --git a/arch/sh/kernel/time_64.c b/arch/sh/kernel/time_64.c new file mode 100644 index 000000000000..f819ba38a6ce --- /dev/null +++ b/arch/sh/kernel/time_64.c @@ -0,0 +1,519 @@ +/* + * arch/sh/kernel/time_64.c + * + * Copyright (C) 2000, 2001 Paolo Alberelli + * Copyright (C) 2003 - 2007 Paul Mundt + * Copyright (C) 2003 Richard Curnow + * + * Original TMU/RTC code taken from sh version. + * Copyright (C) 1999 Tetsuya Okada & Niibe Yutaka + * Some code taken from i386 version. + * Copyright (C) 1991, 1992, 1995 Linus Torvalds + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/errno.h> +#include <linux/rwsem.h> +#include <linux/sched.h> +#include <linux/kernel.h> +#include <linux/param.h> +#include <linux/string.h> +#include <linux/mm.h> +#include <linux/interrupt.h> +#include <linux/time.h> +#include <linux/delay.h> +#include <linux/init.h> +#include <linux/profile.h> +#include <linux/smp.h> +#include <linux/module.h> +#include <linux/bcd.h> +#include <linux/timex.h> +#include <linux/irq.h> +#include <linux/io.h> +#include <linux/platform_device.h> +#include <asm/cpu/registers.h> /* required by inline __asm__ stmt. */ +#include <asm/cpu/irq.h> +#include <asm/addrspace.h> +#include <asm/processor.h> +#include <asm/uaccess.h> +#include <asm/delay.h> + +#define TMU_TOCR_INIT 0x00 +#define TMU0_TCR_INIT 0x0020 +#define TMU_TSTR_INIT 1 +#define TMU_TSTR_OFF 0 + +/* Real Time Clock */ +#define RTC_BLOCK_OFF 0x01040000 +#define RTC_BASE PHYS_PERIPHERAL_BLOCK + RTC_BLOCK_OFF +#define RTC_RCR1_CIE 0x10 /* Carry Interrupt Enable */ +#define RTC_RCR1 (rtc_base + 0x38) + +/* Clock, Power and Reset Controller */ +#define CPRC_BLOCK_OFF 0x01010000 +#define CPRC_BASE PHYS_PERIPHERAL_BLOCK + CPRC_BLOCK_OFF + +#define FRQCR (cprc_base+0x0) +#define WTCSR (cprc_base+0x0018) +#define STBCR (cprc_base+0x0030) + +/* Time Management Unit */ +#define TMU_BLOCK_OFF 0x01020000 +#define TMU_BASE PHYS_PERIPHERAL_BLOCK + TMU_BLOCK_OFF +#define TMU0_BASE tmu_base + 0x8 + (0xc * 0x0) +#define TMU1_BASE tmu_base + 0x8 + (0xc * 0x1) +#define TMU2_BASE tmu_base + 0x8 + (0xc * 0x2) + +#define TMU_TOCR tmu_base+0x0 /* Byte access */ +#define TMU_TSTR tmu_base+0x4 /* Byte access */ + +#define TMU0_TCOR TMU0_BASE+0x0 /* Long access */ +#define TMU0_TCNT TMU0_BASE+0x4 /* Long access */ +#define TMU0_TCR TMU0_BASE+0x8 /* Word access */ + +#define TICK_SIZE (tick_nsec / 1000) + +static unsigned long tmu_base, rtc_base; +unsigned long cprc_base; + +/* Variables to allow interpolation of time of day to resolution better than a + * jiffy. */ + +/* This is effectively protected by xtime_lock */ +static unsigned long ctc_last_interrupt; +static unsigned long long usecs_per_jiffy = 1000000/HZ; /* Approximation */ + +#define CTC_JIFFY_SCALE_SHIFT 40 + +/* 2**CTC_JIFFY_SCALE_SHIFT / ctc_ticks_per_jiffy */ +static unsigned long long scaled_recip_ctc_ticks_per_jiffy; + +/* Estimate number of microseconds that have elapsed since the last timer tick, + by scaling the delta that has occurred in the CTC register. + + WARNING WARNING WARNING : This algorithm relies on the CTC decrementing at + the CPU clock rate. If the CPU sleeps, the CTC stops counting. Bear this + in mind if enabling SLEEP_WORKS in process.c. In that case, this algorithm + probably needs to use TMU.TCNT0 instead. This will work even if the CPU is + sleeping, though will be coarser. + + FIXME : What if usecs_per_tick is moving around too much, e.g. if an adjtime + is running or if the freq or tick arguments of adjtimex are modified after + we have calibrated the scaling factor? This will result in either a jump at + the end of a tick period, or a wrap backwards at the start of the next one, + if the application is reading the time of day often enough. I think we + ought to do better than this. For this reason, usecs_per_jiffy is left + separated out in the calculation below. This allows some future hook into + the adjtime-related stuff in kernel/timer.c to remove this hazard. + +*/ + +static unsigned long usecs_since_tick(void) +{ + unsigned long long current_ctc; + long ctc_ticks_since_interrupt; + unsigned long long ull_ctc_ticks_since_interrupt; + unsigned long result; + + unsigned long long mul1_out; + unsigned long long mul1_out_high; + unsigned long long mul2_out_low, mul2_out_high; + + /* Read CTC register */ + asm ("getcon cr62, %0" : "=r" (current_ctc)); + /* Note, the CTC counts down on each CPU clock, not up. + Note(2), use long type to get correct wraparound arithmetic when + the counter crosses zero. */ + ctc_ticks_since_interrupt = (long) ctc_last_interrupt - (long) current_ctc; + ull_ctc_ticks_since_interrupt = (unsigned long long) ctc_ticks_since_interrupt; + + /* Inline assembly to do 32x32x32->64 multiplier */ + asm volatile ("mulu.l %1, %2, %0" : + "=r" (mul1_out) : + "r" (ull_ctc_ticks_since_interrupt), "r" (usecs_per_jiffy)); + + mul1_out_high = mul1_out >> 32; + + asm volatile ("mulu.l %1, %2, %0" : + "=r" (mul2_out_low) : + "r" (mul1_out), "r" (scaled_recip_ctc_ticks_per_jiffy)); + +#if 1 + asm volatile ("mulu.l %1, %2, %0" : + "=r" (mul2_out_high) : + "r" (mul1_out_high), "r" (scaled_recip_ctc_ticks_per_jiffy)); +#endif + + result = (unsigned long) (((mul2_out_high << 32) + mul2_out_low) >> CTC_JIFFY_SCALE_SHIFT); + + return result; +} + +void do_gettimeofday(struct timeval *tv) +{ + unsigned long flags; + unsigned long seq; + unsigned long usec, sec; + + do { + seq = read_seqbegin_irqsave(&xtime_lock, flags); + usec = usecs_since_tick(); + sec = xtime.tv_sec; + usec += xtime.tv_nsec / 1000; + } while (read_seqretry_irqrestore(&xtime_lock, seq, flags)); + + while (usec >= 1000000) { + usec -= 1000000; + sec++; + } + + tv->tv_sec = sec; + tv->tv_usec = usec; +} + +int do_settimeofday(struct timespec *tv) +{ + time_t wtm_sec, sec = tv->tv_sec; + long wtm_nsec, nsec = tv->tv_nsec; + + if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC) + return -EINVAL; + + write_seqlock_irq(&xtime_lock); + /* + * This is revolting. We need to set "xtime" correctly. However, the + * value in this location is the value at the most recent update of + * wall time. Discover what correction gettimeofday() would have + * made, and then undo it! + */ + nsec -= 1000 * usecs_since_tick(); + + wtm_sec = wall_to_monotonic.tv_sec + (xtime.tv_sec - sec); + wtm_nsec = wall_to_monotonic.tv_nsec + (xtime.tv_nsec - nsec); + + set_normalized_timespec(&xtime, sec, nsec); + set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec); + + ntp_clear(); + write_sequnlock_irq(&xtime_lock); + clock_was_set(); + + return 0; +} +EXPORT_SYMBOL(do_settimeofday); + +/* Dummy RTC ops */ +static void null_rtc_get_time(struct timespec *tv) +{ + tv->tv_sec = mktime(2000, 1, 1, 0, 0, 0); + tv->tv_nsec = 0; +} + +static int null_rtc_set_time(const time_t secs) +{ + return 0; +} + +void (*rtc_sh_get_time)(struct timespec *) = null_rtc_get_time; +int (*rtc_sh_set_time)(const time_t) = null_rtc_set_time; + +/* last time the RTC clock got updated */ +static long last_rtc_update; + +/* + * timer_interrupt() needs to keep up the real-time clock, + * as well as call the "do_timer()" routine every clocktick + */ +static inline void do_timer_interrupt(void) +{ + unsigned long long current_ctc; + asm ("getcon cr62, %0" : "=r" (current_ctc)); + ctc_last_interrupt = (unsigned long) current_ctc; + + do_timer(1); +#ifndef CONFIG_SMP + update_process_times(user_mode(get_irq_regs())); +#endif + if (current->pid) + profile_tick(CPU_PROFILING); + +#ifdef CONFIG_HEARTBEAT + if (sh_mv.mv_heartbeat != NULL) + sh_mv.mv_heartbeat(); +#endif + + /* + * If we have an externally synchronized Linux clock, then update + * RTC clock accordingly every ~11 minutes. Set_rtc_mmss() has to be + * called as close as possible to 500 ms before the new second starts. + */ + if (ntp_synced() && + xtime.tv_sec > last_rtc_update + 660 && + (xtime.tv_nsec / 1000) >= 500000 - ((unsigned) TICK_SIZE) / 2 && + (xtime.tv_nsec / 1000) <= 500000 + ((unsigned) TICK_SIZE) / 2) { + if (rtc_sh_set_time(xtime.tv_sec) == 0) + last_rtc_update = xtime.tv_sec; + else + /* do it again in 60 s */ + last_rtc_update = xtime.tv_sec - 600; + } +} + +/* + * This is the same as the above, except we _also_ save the current + * Time Stamp Counter value at the time of the timer interrupt, so that + * we later on can estimate the time of day more exactly. + */ +static irqreturn_t timer_interrupt(int irq, void *dev_id) +{ + unsigned long timer_status; + + /* Clear UNF bit */ + timer_status = ctrl_inw(TMU0_TCR); + timer_status &= ~0x100; + ctrl_outw(timer_status, TMU0_TCR); + + /* + * Here we are in the timer irq handler. We just have irqs locally + * disabled but we don't know if the timer_bh is running on the other + * CPU. We need to avoid to SMP race with it. NOTE: we don' t need + * the irq version of write_lock because as just said we have irq + * locally disabled. -arca + */ + write_lock(&xtime_lock); + do_timer_interrupt(); + write_unlock(&xtime_lock); + + return IRQ_HANDLED; +} + + +static __init unsigned int get_cpu_hz(void) +{ + unsigned int count; + unsigned long __dummy; + unsigned long ctc_val_init, ctc_val; + + /* + ** Regardless the toolchain, force the compiler to use the + ** arbitrary register r3 as a clock tick counter. + ** NOTE: r3 must be in accordance with sh64_rtc_interrupt() + */ + register unsigned long long __rtc_irq_flag __asm__ ("r3"); + + local_irq_enable(); + do {} while (ctrl_inb(rtc_base) != 0); + ctrl_outb(RTC_RCR1_CIE, RTC_RCR1); /* Enable carry interrupt */ + + /* + * r3 is arbitrary. CDC does not support "=z". + */ + ctc_val_init = 0xffffffff; + ctc_val = ctc_val_init; + + asm volatile("gettr tr0, %1\n\t" + "putcon %0, " __CTC "\n\t" + "and %2, r63, %2\n\t" + "pta $+4, tr0\n\t" + "beq/l %2, r63, tr0\n\t" + "ptabs %1, tr0\n\t" + "getcon " __CTC ", %0\n\t" + : "=r"(ctc_val), "=r" (__dummy), "=r" (__rtc_irq_flag) + : "0" (0)); + local_irq_disable(); + /* + * SH-3: + * CPU clock = 4 stages * loop + * tst rm,rm if id ex + * bt/s 1b if id ex + * add #1,rd if id ex + * (if) pipe line stole + * tst rm,rm if id ex + * .... + * + * + * SH-4: + * CPU clock = 6 stages * loop + * I don't know why. + * .... + * + * SH-5: + * Use CTC register to count. This approach returns the right value + * even if the I-cache is disabled (e.g. whilst debugging.) + * + */ + + count = ctc_val_init - ctc_val; /* CTC counts down */ + + /* + * This really is count by the number of clock cycles + * by the ratio between a complete R64CNT + * wrap-around (128) and CUI interrupt being raised (64). + */ + return count*2; +} + +static irqreturn_t sh64_rtc_interrupt(int irq, void *dev_id) +{ + struct pt_regs *regs = get_irq_regs(); + + ctrl_outb(0, RTC_RCR1); /* Disable Carry Interrupts */ + regs->regs[3] = 1; /* Using r3 */ + + return IRQ_HANDLED; +} + +static struct irqaction irq0 = { + .handler = timer_interrupt, + .flags = IRQF_DISABLED, + .mask = CPU_MASK_NONE, + .name = "timer", +}; +static struct irqaction irq1 = { + .handler = sh64_rtc_interrupt, + .flags = IRQF_DISABLED, + .mask = CPU_MASK_NONE, + .name = "rtc", +}; + +void __init time_init(void) +{ + unsigned int cpu_clock, master_clock, bus_clock, module_clock; + unsigned long interval; + unsigned long frqcr, ifc, pfc; + static int ifc_table[] = { 2, 4, 6, 8, 10, 12, 16, 24 }; +#define bfc_table ifc_table /* Same */ +#define pfc_table ifc_table /* Same */ + + tmu_base = onchip_remap(TMU_BASE, 1024, "TMU"); + if (!tmu_base) { + panic("Unable to remap TMU\n"); + } + + rtc_base = onchip_remap(RTC_BASE, 1024, "RTC"); + if (!rtc_base) { + panic("Unable to remap RTC\n"); + } + + cprc_base = onchip_remap(CPRC_BASE, 1024, "CPRC"); + if (!cprc_base) { + panic("Unable to remap CPRC\n"); + } + + rtc_sh_get_time(&xtime); + + setup_irq(TIMER_IRQ, &irq0); + setup_irq(RTC_IRQ, &irq1); + + /* Check how fast it is.. */ + cpu_clock = get_cpu_hz(); + + /* Note careful order of operations to maintain reasonable precision and avoid overflow. */ + scaled_recip_ctc_ticks_per_jiffy = ((1ULL << CTC_JIFFY_SCALE_SHIFT) / (unsigned long long)(cpu_clock / HZ)); + + free_irq(RTC_IRQ, NULL); + + printk("CPU clock: %d.%02dMHz\n", + (cpu_clock / 1000000), (cpu_clock % 1000000)/10000); + { + unsigned short bfc; + frqcr = ctrl_inl(FRQCR); + ifc = ifc_table[(frqcr>> 6) & 0x0007]; + bfc = bfc_table[(frqcr>> 3) & 0x0007]; + pfc = pfc_table[(frqcr>> 12) & 0x0007]; + master_clock = cpu_clock * ifc; + bus_clock = master_clock/bfc; + } + + printk("Bus clock: %d.%02dMHz\n", + (bus_clock/1000000), (bus_clock % 1000000)/10000); + module_clock = master_clock/pfc; + printk("Module clock: %d.%02dMHz\n", + (module_clock/1000000), (module_clock % 1000000)/10000); + interval = (module_clock/(HZ*4)); + + printk("Interval = %ld\n", interval); + + current_cpu_data.cpu_clock = cpu_clock; + current_cpu_data.master_clock = master_clock; + current_cpu_data.bus_clock = bus_clock; + current_cpu_data.module_clock = module_clock; + + /* Start TMU0 */ + ctrl_outb(TMU_TSTR_OFF, TMU_TSTR); + ctrl_outb(TMU_TOCR_INIT, TMU_TOCR); + ctrl_outw(TMU0_TCR_INIT, TMU0_TCR); + ctrl_outl(interval, TMU0_TCOR); + ctrl_outl(interval, TMU0_TCNT); + ctrl_outb(TMU_TSTR_INIT, TMU_TSTR); +} + +void enter_deep_standby(void) +{ + /* Disable watchdog timer */ + ctrl_outl(0xa5000000, WTCSR); + /* Configure deep standby on sleep */ + ctrl_outl(0x03, STBCR); + +#ifdef CONFIG_SH_ALPHANUMERIC + { + extern void mach_alphanum(int position, unsigned char value); + extern void mach_alphanum_brightness(int setting); + char halted[] = "Halted. "; + int i; + mach_alphanum_brightness(6); /* dimmest setting above off */ + for (i=0; i<8; i++) { + mach_alphanum(i, halted[i]); + } + asm __volatile__ ("synco"); + } +#endif + + asm __volatile__ ("sleep"); + asm __volatile__ ("synci"); + asm __volatile__ ("nop"); + asm __volatile__ ("nop"); + asm __volatile__ ("nop"); + asm __volatile__ ("nop"); + panic("Unexpected wakeup!\n"); +} + +static struct resource rtc_resources[] = { + [0] = { + /* RTC base, filled in by rtc_init */ + .flags = IORESOURCE_IO, + }, + [1] = { + /* Period IRQ */ + .start = IRQ_PRI, + .flags = IORESOURCE_IRQ, + }, + [2] = { + /* Carry IRQ */ + .start = IRQ_CUI, + .flags = IORESOURCE_IRQ, + }, + [3] = { + /* Alarm IRQ */ + .start = IRQ_ATI, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device rtc_device = { + .name = "sh-rtc", + .id = -1, + .num_resources = ARRAY_SIZE(rtc_resources), + .resource = rtc_resources, +}; + +static int __init rtc_init(void) +{ + rtc_resources[0].start = rtc_base; + rtc_resources[0].end = rtc_resources[0].start + 0x58 - 1; + + return platform_device_register(&rtc_device); +} +device_initcall(rtc_init); diff --git a/arch/sh/kernel/timers/timer-cmt.c b/arch/sh/kernel/timers/timer-cmt.c index 82de6895ade5..499e07beebe2 100644 --- a/arch/sh/kernel/timers/timer-cmt.c +++ b/arch/sh/kernel/timers/timer-cmt.c @@ -31,7 +31,9 @@ #define cmt_clock_enable() do { ctrl_outb(ctrl_inb(STBCR3) & ~0x10, STBCR3); } while(0) #define CMT_CMCSR_INIT 0x0040 #define CMT_CMCSR_CALIB 0x0000 -#elif defined(CONFIG_CPU_SUBTYPE_SH7206) +#elif defined(CONFIG_CPU_SUBTYPE_SH7203) || \ + defined(CONFIG_CPU_SUBTYPE_SH7206) || \ + defined(CONFIG_CPU_SUBTYPE_SH7263) #define CMT_CMSTR 0xfffec000 #define CMT_CMCSR_0 0xfffec002 #define CMT_CMCNT_0 0xfffec004 diff --git a/arch/sh/kernel/timers/timer-tmu.c b/arch/sh/kernel/timers/timer-tmu.c index 628ec9a15e38..8935570008d2 100644 --- a/arch/sh/kernel/timers/timer-tmu.c +++ b/arch/sh/kernel/timers/timer-tmu.c @@ -174,6 +174,7 @@ static int tmu_timer_init(void) tmu_timer_stop(); #if !defined(CONFIG_CPU_SUBTYPE_SH7720) && \ + !defined(CONFIG_CPU_SUBTYPE_SH7721) && \ !defined(CONFIG_CPU_SUBTYPE_SH7760) && \ !defined(CONFIG_CPU_SUBTYPE_SH7785) && \ !defined(CONFIG_CPU_SUBTYPE_SHX3) diff --git a/arch/sh/kernel/traps.c b/arch/sh/kernel/traps.c index cf99111cb33f..a3bdc68ef02c 100644 --- a/arch/sh/kernel/traps.c +++ b/arch/sh/kernel/traps.c @@ -1,947 +1,68 @@ -/* - * 'traps.c' handles hardware traps and faults after we have saved some - * state in 'entry.S'. - * - * SuperH version: Copyright (C) 1999 Niibe Yutaka - * Copyright (C) 2000 Philipp Rumpf - * Copyright (C) 2000 David Howells - * Copyright (C) 2002 - 2007 Paul Mundt - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#include <linux/kernel.h> -#include <linux/ptrace.h> -#include <linux/init.h> -#include <linux/spinlock.h> -#include <linux/module.h> -#include <linux/kallsyms.h> -#include <linux/io.h> #include <linux/bug.h> -#include <linux/debug_locks.h> +#include <linux/io.h> +#include <linux/types.h> #include <linux/kdebug.h> -#include <linux/kexec.h> -#include <linux/limits.h> +#include <linux/signal.h> +#include <linux/sched.h> #include <asm/system.h> -#include <asm/uaccess.h> - -#ifdef CONFIG_SH_KGDB -#include <asm/kgdb.h> -#define CHK_REMOTE_DEBUG(regs) \ -{ \ - if (kgdb_debug_hook && !user_mode(regs))\ - (*kgdb_debug_hook)(regs); \ -} -#else -#define CHK_REMOTE_DEBUG(regs) -#endif - -#ifdef CONFIG_CPU_SH2 -# define TRAP_RESERVED_INST 4 -# define TRAP_ILLEGAL_SLOT_INST 6 -# define TRAP_ADDRESS_ERROR 9 -# ifdef CONFIG_CPU_SH2A -# define TRAP_DIVZERO_ERROR 17 -# define TRAP_DIVOVF_ERROR 18 -# endif -#else -#define TRAP_RESERVED_INST 12 -#define TRAP_ILLEGAL_SLOT_INST 13 -#endif - -static void dump_mem(const char *str, unsigned long bottom, unsigned long top) -{ - unsigned long p; - int i; - - printk("%s(0x%08lx to 0x%08lx)\n", str, bottom, top); - - for (p = bottom & ~31; p < top; ) { - printk("%04lx: ", p & 0xffff); - - for (i = 0; i < 8; i++, p += 4) { - unsigned int val; - - if (p < bottom || p >= top) - printk(" "); - else { - if (__get_user(val, (unsigned int __user *)p)) { - printk("\n"); - return; - } - printk("%08x ", val); - } - } - printk("\n"); - } -} - -static DEFINE_SPINLOCK(die_lock); - -void die(const char * str, struct pt_regs * regs, long err) -{ - static int die_counter; - - oops_enter(); - - console_verbose(); - spin_lock_irq(&die_lock); - bust_spinlocks(1); - - printk("%s: %04lx [#%d]\n", str, err & 0xffff, ++die_counter); - - CHK_REMOTE_DEBUG(regs); - print_modules(); - show_regs(regs); - - printk("Process: %s (pid: %d, stack limit = %p)\n", current->comm, - task_pid_nr(current), task_stack_page(current) + 1); - - if (!user_mode(regs) || in_interrupt()) - dump_mem("Stack: ", regs->regs[15], THREAD_SIZE + - (unsigned long)task_stack_page(current)); - - bust_spinlocks(0); - add_taint(TAINT_DIE); - spin_unlock_irq(&die_lock); - - if (kexec_should_crash(current)) - crash_kexec(regs); - - if (in_interrupt()) - panic("Fatal exception in interrupt"); - - if (panic_on_oops) - panic("Fatal exception"); - - oops_exit(); - do_exit(SIGSEGV); -} - -static inline void die_if_kernel(const char *str, struct pt_regs *regs, - long err) -{ - if (!user_mode(regs)) - die(str, regs, err); -} - -/* - * try and fix up kernelspace address errors - * - userspace errors just cause EFAULT to be returned, resulting in SEGV - * - kernel/userspace interfaces cause a jump to an appropriate handler - * - other kernel errors are bad - * - return 0 if fixed-up, -EFAULT if non-fatal (to the kernel) fault - */ -static int die_if_no_fixup(const char * str, struct pt_regs * regs, long err) -{ - if (!user_mode(regs)) { - const struct exception_table_entry *fixup; - fixup = search_exception_tables(regs->pc); - if (fixup) { - regs->pc = fixup->fixup; - return 0; - } - die(str, regs, err); - } - return -EFAULT; -} - -/* - * handle an instruction that does an unaligned memory access by emulating the - * desired behaviour - * - note that PC _may not_ point to the faulting instruction - * (if that instruction is in a branch delay slot) - * - return 0 if emulation okay, -EFAULT on existential error - */ -static int handle_unaligned_ins(u16 instruction, struct pt_regs *regs) -{ - int ret, index, count; - unsigned long *rm, *rn; - unsigned char *src, *dst; - - index = (instruction>>8)&15; /* 0x0F00 */ - rn = ®s->regs[index]; - - index = (instruction>>4)&15; /* 0x00F0 */ - rm = ®s->regs[index]; - - count = 1<<(instruction&3); - - ret = -EFAULT; - switch (instruction>>12) { - case 0: /* mov.[bwl] to/from memory via r0+rn */ - if (instruction & 8) { - /* from memory */ - src = (unsigned char*) *rm; - src += regs->regs[0]; - dst = (unsigned char*) rn; - *(unsigned long*)dst = 0; - -#ifdef __LITTLE_ENDIAN__ - if (copy_from_user(dst, src, count)) - goto fetch_fault; - - if ((count == 2) && dst[1] & 0x80) { - dst[2] = 0xff; - dst[3] = 0xff; - } -#else - dst += 4-count; - - if (__copy_user(dst, src, count)) - goto fetch_fault; - - if ((count == 2) && dst[2] & 0x80) { - dst[0] = 0xff; - dst[1] = 0xff; - } -#endif - } else { - /* to memory */ - src = (unsigned char*) rm; -#if !defined(__LITTLE_ENDIAN__) - src += 4-count; -#endif - dst = (unsigned char*) *rn; - dst += regs->regs[0]; - - if (copy_to_user(dst, src, count)) - goto fetch_fault; - } - ret = 0; - break; - - case 1: /* mov.l Rm,@(disp,Rn) */ - src = (unsigned char*) rm; - dst = (unsigned char*) *rn; - dst += (instruction&0x000F)<<2; - - if (copy_to_user(dst,src,4)) - goto fetch_fault; - ret = 0; - break; - - case 2: /* mov.[bwl] to memory, possibly with pre-decrement */ - if (instruction & 4) - *rn -= count; - src = (unsigned char*) rm; - dst = (unsigned char*) *rn; -#if !defined(__LITTLE_ENDIAN__) - src += 4-count; -#endif - if (copy_to_user(dst, src, count)) - goto fetch_fault; - ret = 0; - break; - - case 5: /* mov.l @(disp,Rm),Rn */ - src = (unsigned char*) *rm; - src += (instruction&0x000F)<<2; - dst = (unsigned char*) rn; - *(unsigned long*)dst = 0; - - if (copy_from_user(dst,src,4)) - goto fetch_fault; - ret = 0; - break; - case 6: /* mov.[bwl] from memory, possibly with post-increment */ - src = (unsigned char*) *rm; - if (instruction & 4) - *rm += count; - dst = (unsigned char*) rn; - *(unsigned long*)dst = 0; - -#ifdef __LITTLE_ENDIAN__ - if (copy_from_user(dst, src, count)) - goto fetch_fault; - - if ((count == 2) && dst[1] & 0x80) { - dst[2] = 0xff; - dst[3] = 0xff; - } -#else - dst += 4-count; - - if (copy_from_user(dst, src, count)) - goto fetch_fault; - - if ((count == 2) && dst[2] & 0x80) { - dst[0] = 0xff; - dst[1] = 0xff; - } -#endif - ret = 0; - break; - - case 8: - switch ((instruction&0xFF00)>>8) { - case 0x81: /* mov.w R0,@(disp,Rn) */ - src = (unsigned char*) ®s->regs[0]; -#if !defined(__LITTLE_ENDIAN__) - src += 2; -#endif - dst = (unsigned char*) *rm; /* called Rn in the spec */ - dst += (instruction&0x000F)<<1; - - if (copy_to_user(dst, src, 2)) - goto fetch_fault; - ret = 0; - break; - - case 0x85: /* mov.w @(disp,Rm),R0 */ - src = (unsigned char*) *rm; - src += (instruction&0x000F)<<1; - dst = (unsigned char*) ®s->regs[0]; - *(unsigned long*)dst = 0; - -#if !defined(__LITTLE_ENDIAN__) - dst += 2; -#endif - - if (copy_from_user(dst, src, 2)) - goto fetch_fault; - -#ifdef __LITTLE_ENDIAN__ - if (dst[1] & 0x80) { - dst[2] = 0xff; - dst[3] = 0xff; - } -#else - if (dst[2] & 0x80) { - dst[0] = 0xff; - dst[1] = 0xff; - } -#endif - ret = 0; - break; - } - break; - } - return ret; - - fetch_fault: - /* Argh. Address not only misaligned but also non-existent. - * Raise an EFAULT and see if it's trapped - */ - return die_if_no_fixup("Fault in unaligned fixup", regs, 0); -} - -/* - * emulate the instruction in the delay slot - * - fetches the instruction from PC+2 - */ -static inline int handle_unaligned_delayslot(struct pt_regs *regs) +#ifdef CONFIG_BUG +static void handle_BUG(struct pt_regs *regs) { - u16 instruction; - - if (copy_from_user(&instruction, (u16 *)(regs->pc+2), 2)) { - /* the instruction-fetch faulted */ - if (user_mode(regs)) - return -EFAULT; - - /* kernel */ - die("delay-slot-insn faulting in handle_unaligned_delayslot", - regs, 0); + enum bug_trap_type tt; + tt = report_bug(regs->pc, regs); + if (tt == BUG_TRAP_TYPE_WARN) { + regs->pc += instruction_size(regs->pc); + return; } - return handle_unaligned_ins(instruction,regs); + die("Kernel BUG", regs, TRAPA_BUG_OPCODE & 0xff); } -/* - * handle an instruction that does an unaligned memory access - * - have to be careful of branch delay-slot instructions that fault - * SH3: - * - if the branch would be taken PC points to the branch - * - if the branch would not be taken, PC points to delay-slot - * SH4: - * - PC always points to delayed branch - * - return 0 if handled, -EFAULT if failed (may not return if in kernel) - */ - -/* Macros to determine offset from current PC for branch instructions */ -/* Explicit type coercion is used to force sign extension where needed */ -#define SH_PC_8BIT_OFFSET(instr) ((((signed char)(instr))*2) + 4) -#define SH_PC_12BIT_OFFSET(instr) ((((signed short)(instr<<4))>>3) + 4) - -/* - * XXX: SH-2A needs this too, but it needs an overhaul thanks to mixed 32-bit - * opcodes.. - */ -#ifndef CONFIG_CPU_SH2A -static int handle_unaligned_notify_count = 10; - -static int handle_unaligned_access(u16 instruction, struct pt_regs *regs) +int is_valid_bugaddr(unsigned long addr) { - u_int rm; - int ret, index; - - index = (instruction>>8)&15; /* 0x0F00 */ - rm = regs->regs[index]; - - /* shout about the first ten userspace fixups */ - if (user_mode(regs) && handle_unaligned_notify_count>0) { - handle_unaligned_notify_count--; - - printk(KERN_NOTICE "Fixing up unaligned userspace access " - "in \"%s\" pid=%d pc=0x%p ins=0x%04hx\n", - current->comm, task_pid_nr(current), - (u16 *)regs->pc, instruction); - } - - ret = -EFAULT; - switch (instruction&0xF000) { - case 0x0000: - if (instruction==0x000B) { - /* rts */ - ret = handle_unaligned_delayslot(regs); - if (ret==0) - regs->pc = regs->pr; - } - else if ((instruction&0x00FF)==0x0023) { - /* braf @Rm */ - ret = handle_unaligned_delayslot(regs); - if (ret==0) - regs->pc += rm + 4; - } - else if ((instruction&0x00FF)==0x0003) { - /* bsrf @Rm */ - ret = handle_unaligned_delayslot(regs); - if (ret==0) { - regs->pr = regs->pc + 4; - regs->pc += rm + 4; - } - } - else { - /* mov.[bwl] to/from memory via r0+rn */ - goto simple; - } - break; - - case 0x1000: /* mov.l Rm,@(disp,Rn) */ - goto simple; - - case 0x2000: /* mov.[bwl] to memory, possibly with pre-decrement */ - goto simple; - - case 0x4000: - if ((instruction&0x00FF)==0x002B) { - /* jmp @Rm */ - ret = handle_unaligned_delayslot(regs); - if (ret==0) - regs->pc = rm; - } - else if ((instruction&0x00FF)==0x000B) { - /* jsr @Rm */ - ret = handle_unaligned_delayslot(regs); - if (ret==0) { - regs->pr = regs->pc + 4; - regs->pc = rm; - } - } - else { - /* mov.[bwl] to/from memory via r0+rn */ - goto simple; - } - break; - - case 0x5000: /* mov.l @(disp,Rm),Rn */ - goto simple; - - case 0x6000: /* mov.[bwl] from memory, possibly with post-increment */ - goto simple; - - case 0x8000: /* bf lab, bf/s lab, bt lab, bt/s lab */ - switch (instruction&0x0F00) { - case 0x0100: /* mov.w R0,@(disp,Rm) */ - goto simple; - case 0x0500: /* mov.w @(disp,Rm),R0 */ - goto simple; - case 0x0B00: /* bf lab - no delayslot*/ - break; - case 0x0F00: /* bf/s lab */ - ret = handle_unaligned_delayslot(regs); - if (ret==0) { -#if defined(CONFIG_CPU_SH4) || defined(CONFIG_SH7705_CACHE_32KB) - if ((regs->sr & 0x00000001) != 0) - regs->pc += 4; /* next after slot */ - else -#endif - regs->pc += SH_PC_8BIT_OFFSET(instruction); - } - break; - case 0x0900: /* bt lab - no delayslot */ - break; - case 0x0D00: /* bt/s lab */ - ret = handle_unaligned_delayslot(regs); - if (ret==0) { -#if defined(CONFIG_CPU_SH4) || defined(CONFIG_SH7705_CACHE_32KB) - if ((regs->sr & 0x00000001) == 0) - regs->pc += 4; /* next after slot */ - else -#endif - regs->pc += SH_PC_8BIT_OFFSET(instruction); - } - break; - } - break; - - case 0xA000: /* bra label */ - ret = handle_unaligned_delayslot(regs); - if (ret==0) - regs->pc += SH_PC_12BIT_OFFSET(instruction); - break; - - case 0xB000: /* bsr label */ - ret = handle_unaligned_delayslot(regs); - if (ret==0) { - regs->pr = regs->pc + 4; - regs->pc += SH_PC_12BIT_OFFSET(instruction); - } - break; - } - return ret; - - /* handle non-delay-slot instruction */ - simple: - ret = handle_unaligned_ins(instruction,regs); - if (ret==0) - regs->pc += instruction_size(instruction); - return ret; + return addr >= PAGE_OFFSET; } -#endif /* CONFIG_CPU_SH2A */ - -#ifdef CONFIG_CPU_HAS_SR_RB -#define lookup_exception_vector(x) \ - __asm__ __volatile__ ("stc r2_bank, %0\n\t" : "=r" ((x))) -#else -#define lookup_exception_vector(x) \ - __asm__ __volatile__ ("mov r4, %0\n\t" : "=r" ((x))) #endif /* - * Handle various address error exceptions: - * - instruction address error: - * misaligned PC - * PC >= 0x80000000 in user mode - * - data address error (read and write) - * misaligned data access - * access to >= 0x80000000 is user mode - * Unfortuntaly we can't distinguish between instruction address error - * and data address errors caused by read accesses. + * Generic trap handler. */ -asmlinkage void do_address_error(struct pt_regs *regs, - unsigned long writeaccess, - unsigned long address) +BUILD_TRAP_HANDLER(debug) { - unsigned long error_code = 0; - mm_segment_t oldfs; - siginfo_t info; -#ifndef CONFIG_CPU_SH2A - u16 instruction; - int tmp; -#endif - - /* Intentional ifdef */ -#ifdef CONFIG_CPU_HAS_SR_RB - lookup_exception_vector(error_code); -#endif - - oldfs = get_fs(); - - if (user_mode(regs)) { - int si_code = BUS_ADRERR; - - local_irq_enable(); + TRAP_HANDLER_DECL; - /* bad PC is not something we can fix */ - if (regs->pc & 1) { - si_code = BUS_ADRALN; - goto uspace_segv; - } + /* Rewind */ + regs->pc -= instruction_size(ctrl_inw(regs->pc - 4)); -#ifndef CONFIG_CPU_SH2A - set_fs(USER_DS); - if (copy_from_user(&instruction, (u16 *)(regs->pc), 2)) { - /* Argh. Fault on the instruction itself. - This should never happen non-SMP - */ - set_fs(oldfs); - goto uspace_segv; - } - - tmp = handle_unaligned_access(instruction, regs); - set_fs(oldfs); - - if (tmp==0) - return; /* sorted */ -#endif - -uspace_segv: - printk(KERN_NOTICE "Sending SIGBUS to \"%s\" due to unaligned " - "access (PC %lx PR %lx)\n", current->comm, regs->pc, - regs->pr); - - info.si_signo = SIGBUS; - info.si_errno = 0; - info.si_code = si_code; - info.si_addr = (void __user *)address; - force_sig_info(SIGBUS, &info, current); - } else { - if (regs->pc & 1) - die("unaligned program counter", regs, error_code); - -#ifndef CONFIG_CPU_SH2A - set_fs(KERNEL_DS); - if (copy_from_user(&instruction, (u16 *)(regs->pc), 2)) { - /* Argh. Fault on the instruction itself. - This should never happen non-SMP - */ - set_fs(oldfs); - die("insn faulting in do_address_error", regs, 0); - } - - handle_unaligned_access(instruction, regs); - set_fs(oldfs); -#else - printk(KERN_NOTICE "Killing process \"%s\" due to unaligned " - "access\n", current->comm); + if (notify_die(DIE_TRAP, "debug trap", regs, 0, vec & 0xff, + SIGTRAP) == NOTIFY_STOP) + return; - force_sig(SIGSEGV, current); -#endif - } + force_sig(SIGTRAP, current); } -#ifdef CONFIG_SH_DSP /* - * SH-DSP support gerg@snapgear.com. + * Special handler for BUG() traps. */ -int is_dsp_inst(struct pt_regs *regs) +BUILD_TRAP_HANDLER(bug) { - unsigned short inst = 0; - - /* - * Safe guard if DSP mode is already enabled or we're lacking - * the DSP altogether. - */ - if (!(current_cpu_data.flags & CPU_HAS_DSP) || (regs->sr & SR_DSP)) - return 0; - - get_user(inst, ((unsigned short *) regs->pc)); - - inst &= 0xf000; - - /* Check for any type of DSP or support instruction */ - if ((inst == 0xf000) || (inst == 0x4000)) - return 1; - - return 0; -} -#else -#define is_dsp_inst(regs) (0) -#endif /* CONFIG_SH_DSP */ + TRAP_HANDLER_DECL; -#ifdef CONFIG_CPU_SH2A -asmlinkage void do_divide_error(unsigned long r4, unsigned long r5, - unsigned long r6, unsigned long r7, - struct pt_regs __regs) -{ - siginfo_t info; - - switch (r4) { - case TRAP_DIVZERO_ERROR: - info.si_code = FPE_INTDIV; - break; - case TRAP_DIVOVF_ERROR: - info.si_code = FPE_INTOVF; - break; - } - - force_sig_info(SIGFPE, &info, current); -} -#endif - -/* arch/sh/kernel/cpu/sh4/fpu.c */ -extern int do_fpu_inst(unsigned short, struct pt_regs *); -extern asmlinkage void do_fpu_state_restore(unsigned long r4, unsigned long r5, - unsigned long r6, unsigned long r7, struct pt_regs __regs); - -asmlinkage void do_reserved_inst(unsigned long r4, unsigned long r5, - unsigned long r6, unsigned long r7, - struct pt_regs __regs) -{ - struct pt_regs *regs = RELOC_HIDE(&__regs, 0); - unsigned long error_code; - struct task_struct *tsk = current; - -#ifdef CONFIG_SH_FPU_EMU - unsigned short inst = 0; - int err; - - get_user(inst, (unsigned short*)regs->pc); - - err = do_fpu_inst(inst, regs); - if (!err) { - regs->pc += instruction_size(inst); - return; - } - /* not a FPU inst. */ -#endif + /* Rewind */ + regs->pc -= instruction_size(ctrl_inw(regs->pc - 4)); -#ifdef CONFIG_SH_DSP - /* Check if it's a DSP instruction */ - if (is_dsp_inst(regs)) { - /* Enable DSP mode, and restart instruction. */ - regs->sr |= SR_DSP; + if (notify_die(DIE_TRAP, "bug trap", regs, 0, TRAPA_BUG_OPCODE & 0xff, + SIGTRAP) == NOTIFY_STOP) return; - } -#endif - - lookup_exception_vector(error_code); - - local_irq_enable(); - CHK_REMOTE_DEBUG(regs); - force_sig(SIGILL, tsk); - die_if_no_fixup("reserved instruction", regs, error_code); -} - -#ifdef CONFIG_SH_FPU_EMU -static int emulate_branch(unsigned short inst, struct pt_regs* regs) -{ - /* - * bfs: 8fxx: PC+=d*2+4; - * bts: 8dxx: PC+=d*2+4; - * bra: axxx: PC+=D*2+4; - * bsr: bxxx: PC+=D*2+4 after PR=PC+4; - * braf:0x23: PC+=Rn*2+4; - * bsrf:0x03: PC+=Rn*2+4 after PR=PC+4; - * jmp: 4x2b: PC=Rn; - * jsr: 4x0b: PC=Rn after PR=PC+4; - * rts: 000b: PC=PR; - */ - if ((inst & 0xfd00) == 0x8d00) { - regs->pc += SH_PC_8BIT_OFFSET(inst); - return 0; - } - - if ((inst & 0xe000) == 0xa000) { - regs->pc += SH_PC_12BIT_OFFSET(inst); - return 0; - } - - if ((inst & 0xf0df) == 0x0003) { - regs->pc += regs->regs[(inst & 0x0f00) >> 8] + 4; - return 0; - } - - if ((inst & 0xf0df) == 0x400b) { - regs->pc = regs->regs[(inst & 0x0f00) >> 8]; - return 0; - } - - if ((inst & 0xffff) == 0x000b) { - regs->pc = regs->pr; - return 0; - } - - return 1; -} -#endif - -asmlinkage void do_illegal_slot_inst(unsigned long r4, unsigned long r5, - unsigned long r6, unsigned long r7, - struct pt_regs __regs) -{ - struct pt_regs *regs = RELOC_HIDE(&__regs, 0); - unsigned long error_code; - struct task_struct *tsk = current; -#ifdef CONFIG_SH_FPU_EMU - unsigned short inst = 0; - - get_user(inst, (unsigned short *)regs->pc + 1); - if (!do_fpu_inst(inst, regs)) { - get_user(inst, (unsigned short *)regs->pc); - if (!emulate_branch(inst, regs)) - return; - /* fault in branch.*/ - } - /* not a FPU inst. */ -#endif - - lookup_exception_vector(error_code); - - local_irq_enable(); - CHK_REMOTE_DEBUG(regs); - force_sig(SIGILL, tsk); - die_if_no_fixup("illegal slot instruction", regs, error_code); -} - -asmlinkage void do_exception_error(unsigned long r4, unsigned long r5, - unsigned long r6, unsigned long r7, - struct pt_regs __regs) -{ - struct pt_regs *regs = RELOC_HIDE(&__regs, 0); - long ex; - - lookup_exception_vector(ex); - die_if_kernel("exception", regs, ex); -} - -#if defined(CONFIG_SH_STANDARD_BIOS) -void *gdb_vbr_vector; - -static inline void __init gdb_vbr_init(void) -{ - register unsigned long vbr; - - /* - * Read the old value of the VBR register to initialise - * the vector through which debug and BIOS traps are - * delegated by the Linux trap handler. - */ - asm volatile("stc vbr, %0" : "=r" (vbr)); - - gdb_vbr_vector = (void *)(vbr + 0x100); - printk("Setting GDB trap vector to 0x%08lx\n", - (unsigned long)gdb_vbr_vector); -} -#endif - -void __cpuinit per_cpu_trap_init(void) -{ - extern void *vbr_base; - -#ifdef CONFIG_SH_STANDARD_BIOS - if (raw_smp_processor_id() == 0) - gdb_vbr_init(); -#endif - - /* NOTE: The VBR value should be at P1 - (or P2, virtural "fixed" address space). - It's definitely should not in physical address. */ - - asm volatile("ldc %0, vbr" - : /* no output */ - : "r" (&vbr_base) - : "memory"); -} - -void *set_exception_table_vec(unsigned int vec, void *handler) -{ - extern void *exception_handling_table[]; - void *old_handler; - - old_handler = exception_handling_table[vec]; - exception_handling_table[vec] = handler; - return old_handler; -} - -extern asmlinkage void address_error_handler(unsigned long r4, unsigned long r5, - unsigned long r6, unsigned long r7, - struct pt_regs __regs); - -void __init trap_init(void) -{ - set_exception_table_vec(TRAP_RESERVED_INST, do_reserved_inst); - set_exception_table_vec(TRAP_ILLEGAL_SLOT_INST, do_illegal_slot_inst); - -#if defined(CONFIG_CPU_SH4) && !defined(CONFIG_SH_FPU) || \ - defined(CONFIG_SH_FPU_EMU) - /* - * For SH-4 lacking an FPU, treat floating point instructions as - * reserved. They'll be handled in the math-emu case, or faulted on - * otherwise. - */ - set_exception_table_evt(0x800, do_reserved_inst); - set_exception_table_evt(0x820, do_illegal_slot_inst); -#elif defined(CONFIG_SH_FPU) -#ifdef CONFIG_CPU_SUBTYPE_SHX3 - set_exception_table_evt(0xd80, do_fpu_state_restore); - set_exception_table_evt(0xda0, do_fpu_state_restore); -#else - set_exception_table_evt(0x800, do_fpu_state_restore); - set_exception_table_evt(0x820, do_fpu_state_restore); -#endif -#endif - -#ifdef CONFIG_CPU_SH2 - set_exception_table_vec(TRAP_ADDRESS_ERROR, address_error_handler); -#endif -#ifdef CONFIG_CPU_SH2A - set_exception_table_vec(TRAP_DIVZERO_ERROR, do_divide_error); - set_exception_table_vec(TRAP_DIVOVF_ERROR, do_divide_error); -#endif - - /* Setup VBR for boot cpu */ - per_cpu_trap_init(); -} #ifdef CONFIG_BUG -void handle_BUG(struct pt_regs *regs) -{ - enum bug_trap_type tt; - tt = report_bug(regs->pc, regs); - if (tt == BUG_TRAP_TYPE_WARN) { - regs->pc += 2; - return; + if (__kernel_text_address(instruction_pointer(regs))) { + opcode_t insn = *(opcode_t *)instruction_pointer(regs); + if (insn == TRAPA_BUG_OPCODE) + handle_BUG(regs); } - - die("Kernel BUG", regs, TRAPA_BUG_OPCODE & 0xff); -} - -int is_valid_bugaddr(unsigned long addr) -{ - return addr >= PAGE_OFFSET; -} -#endif - -void show_trace(struct task_struct *tsk, unsigned long *sp, - struct pt_regs *regs) -{ - unsigned long addr; - - if (regs && user_mode(regs)) - return; - - printk("\nCall trace: "); -#ifdef CONFIG_KALLSYMS - printk("\n"); #endif - while (!kstack_end(sp)) { - addr = *sp++; - if (kernel_text_address(addr)) - print_ip_sym(addr); - } - - printk("\n"); - - if (!tsk) - tsk = current; - - debug_show_held_locks(tsk); -} - -void show_stack(struct task_struct *tsk, unsigned long *sp) -{ - unsigned long stack; - - if (!tsk) - tsk = current; - if (tsk == current) - sp = (unsigned long *)current_stack_pointer; - else - sp = (unsigned long *)tsk->thread.sp; - - stack = (unsigned long)sp; - dump_mem("Stack: ", stack, THREAD_SIZE + - (unsigned long)task_stack_page(tsk)); - show_trace(tsk, sp, NULL); -} - -void dump_stack(void) -{ - show_stack(NULL, NULL); + force_sig(SIGTRAP, current); } -EXPORT_SYMBOL(dump_stack); diff --git a/arch/sh/kernel/traps_32.c b/arch/sh/kernel/traps_32.c new file mode 100644 index 000000000000..2e58f7a6b746 --- /dev/null +++ b/arch/sh/kernel/traps_32.c @@ -0,0 +1,919 @@ +/* + * 'traps.c' handles hardware traps and faults after we have saved some + * state in 'entry.S'. + * + * SuperH version: Copyright (C) 1999 Niibe Yutaka + * Copyright (C) 2000 Philipp Rumpf + * Copyright (C) 2000 David Howells + * Copyright (C) 2002 - 2007 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/kernel.h> +#include <linux/ptrace.h> +#include <linux/init.h> +#include <linux/spinlock.h> +#include <linux/module.h> +#include <linux/kallsyms.h> +#include <linux/io.h> +#include <linux/bug.h> +#include <linux/debug_locks.h> +#include <linux/kdebug.h> +#include <linux/kexec.h> +#include <linux/limits.h> +#include <asm/system.h> +#include <asm/uaccess.h> + +#ifdef CONFIG_SH_KGDB +#include <asm/kgdb.h> +#define CHK_REMOTE_DEBUG(regs) \ +{ \ + if (kgdb_debug_hook && !user_mode(regs))\ + (*kgdb_debug_hook)(regs); \ +} +#else +#define CHK_REMOTE_DEBUG(regs) +#endif + +#ifdef CONFIG_CPU_SH2 +# define TRAP_RESERVED_INST 4 +# define TRAP_ILLEGAL_SLOT_INST 6 +# define TRAP_ADDRESS_ERROR 9 +# ifdef CONFIG_CPU_SH2A +# define TRAP_DIVZERO_ERROR 17 +# define TRAP_DIVOVF_ERROR 18 +# endif +#else +#define TRAP_RESERVED_INST 12 +#define TRAP_ILLEGAL_SLOT_INST 13 +#endif + +static void dump_mem(const char *str, unsigned long bottom, unsigned long top) +{ + unsigned long p; + int i; + + printk("%s(0x%08lx to 0x%08lx)\n", str, bottom, top); + + for (p = bottom & ~31; p < top; ) { + printk("%04lx: ", p & 0xffff); + + for (i = 0; i < 8; i++, p += 4) { + unsigned int val; + + if (p < bottom || p >= top) + printk(" "); + else { + if (__get_user(val, (unsigned int __user *)p)) { + printk("\n"); + return; + } + printk("%08x ", val); + } + } + printk("\n"); + } +} + +static DEFINE_SPINLOCK(die_lock); + +void die(const char * str, struct pt_regs * regs, long err) +{ + static int die_counter; + + oops_enter(); + + console_verbose(); + spin_lock_irq(&die_lock); + bust_spinlocks(1); + + printk("%s: %04lx [#%d]\n", str, err & 0xffff, ++die_counter); + + CHK_REMOTE_DEBUG(regs); + print_modules(); + show_regs(regs); + + printk("Process: %s (pid: %d, stack limit = %p)\n", current->comm, + task_pid_nr(current), task_stack_page(current) + 1); + + if (!user_mode(regs) || in_interrupt()) + dump_mem("Stack: ", regs->regs[15], THREAD_SIZE + + (unsigned long)task_stack_page(current)); + + bust_spinlocks(0); + add_taint(TAINT_DIE); + spin_unlock_irq(&die_lock); + + if (kexec_should_crash(current)) + crash_kexec(regs); + + if (in_interrupt()) + panic("Fatal exception in interrupt"); + + if (panic_on_oops) + panic("Fatal exception"); + + oops_exit(); + do_exit(SIGSEGV); +} + +static inline void die_if_kernel(const char *str, struct pt_regs *regs, + long err) +{ + if (!user_mode(regs)) + die(str, regs, err); +} + +/* + * try and fix up kernelspace address errors + * - userspace errors just cause EFAULT to be returned, resulting in SEGV + * - kernel/userspace interfaces cause a jump to an appropriate handler + * - other kernel errors are bad + * - return 0 if fixed-up, -EFAULT if non-fatal (to the kernel) fault + */ +static int die_if_no_fixup(const char * str, struct pt_regs * regs, long err) +{ + if (!user_mode(regs)) { + const struct exception_table_entry *fixup; + fixup = search_exception_tables(regs->pc); + if (fixup) { + regs->pc = fixup->fixup; + return 0; + } + die(str, regs, err); + } + return -EFAULT; +} + +/* + * handle an instruction that does an unaligned memory access by emulating the + * desired behaviour + * - note that PC _may not_ point to the faulting instruction + * (if that instruction is in a branch delay slot) + * - return 0 if emulation okay, -EFAULT on existential error + */ +static int handle_unaligned_ins(u16 instruction, struct pt_regs *regs) +{ + int ret, index, count; + unsigned long *rm, *rn; + unsigned char *src, *dst; + + index = (instruction>>8)&15; /* 0x0F00 */ + rn = ®s->regs[index]; + + index = (instruction>>4)&15; /* 0x00F0 */ + rm = ®s->regs[index]; + + count = 1<<(instruction&3); + + ret = -EFAULT; + switch (instruction>>12) { + case 0: /* mov.[bwl] to/from memory via r0+rn */ + if (instruction & 8) { + /* from memory */ + src = (unsigned char*) *rm; + src += regs->regs[0]; + dst = (unsigned char*) rn; + *(unsigned long*)dst = 0; + +#ifdef __LITTLE_ENDIAN__ + if (copy_from_user(dst, src, count)) + goto fetch_fault; + + if ((count == 2) && dst[1] & 0x80) { + dst[2] = 0xff; + dst[3] = 0xff; + } +#else + dst += 4-count; + + if (__copy_user(dst, src, count)) + goto fetch_fault; + + if ((count == 2) && dst[2] & 0x80) { + dst[0] = 0xff; + dst[1] = 0xff; + } +#endif + } else { + /* to memory */ + src = (unsigned char*) rm; +#if !defined(__LITTLE_ENDIAN__) + src += 4-count; +#endif + dst = (unsigned char*) *rn; + dst += regs->regs[0]; + + if (copy_to_user(dst, src, count)) + goto fetch_fault; + } + ret = 0; + break; + + case 1: /* mov.l Rm,@(disp,Rn) */ + src = (unsigned char*) rm; + dst = (unsigned char*) *rn; + dst += (instruction&0x000F)<<2; + + if (copy_to_user(dst,src,4)) + goto fetch_fault; + ret = 0; + break; + + case 2: /* mov.[bwl] to memory, possibly with pre-decrement */ + if (instruction & 4) + *rn -= count; + src = (unsigned char*) rm; + dst = (unsigned char*) *rn; +#if !defined(__LITTLE_ENDIAN__) + src += 4-count; +#endif + if (copy_to_user(dst, src, count)) + goto fetch_fault; + ret = 0; + break; + + case 5: /* mov.l @(disp,Rm),Rn */ + src = (unsigned char*) *rm; + src += (instruction&0x000F)<<2; + dst = (unsigned char*) rn; + *(unsigned long*)dst = 0; + + if (copy_from_user(dst,src,4)) + goto fetch_fault; + ret = 0; + break; + + case 6: /* mov.[bwl] from memory, possibly with post-increment */ + src = (unsigned char*) *rm; + if (instruction & 4) + *rm += count; + dst = (unsigned char*) rn; + *(unsigned long*)dst = 0; + +#ifdef __LITTLE_ENDIAN__ + if (copy_from_user(dst, src, count)) + goto fetch_fault; + + if ((count == 2) && dst[1] & 0x80) { + dst[2] = 0xff; + dst[3] = 0xff; + } +#else + dst += 4-count; + + if (copy_from_user(dst, src, count)) + goto fetch_fault; + + if ((count == 2) && dst[2] & 0x80) { + dst[0] = 0xff; + dst[1] = 0xff; + } +#endif + ret = 0; + break; + + case 8: + switch ((instruction&0xFF00)>>8) { + case 0x81: /* mov.w R0,@(disp,Rn) */ + src = (unsigned char*) ®s->regs[0]; +#if !defined(__LITTLE_ENDIAN__) + src += 2; +#endif + dst = (unsigned char*) *rm; /* called Rn in the spec */ + dst += (instruction&0x000F)<<1; + + if (copy_to_user(dst, src, 2)) + goto fetch_fault; + ret = 0; + break; + + case 0x85: /* mov.w @(disp,Rm),R0 */ + src = (unsigned char*) *rm; + src += (instruction&0x000F)<<1; + dst = (unsigned char*) ®s->regs[0]; + *(unsigned long*)dst = 0; + +#if !defined(__LITTLE_ENDIAN__) + dst += 2; +#endif + + if (copy_from_user(dst, src, 2)) + goto fetch_fault; + +#ifdef __LITTLE_ENDIAN__ + if (dst[1] & 0x80) { + dst[2] = 0xff; + dst[3] = 0xff; + } +#else + if (dst[2] & 0x80) { + dst[0] = 0xff; + dst[1] = 0xff; + } +#endif + ret = 0; + break; + } + break; + } + return ret; + + fetch_fault: + /* Argh. Address not only misaligned but also non-existent. + * Raise an EFAULT and see if it's trapped + */ + return die_if_no_fixup("Fault in unaligned fixup", regs, 0); +} + +/* + * emulate the instruction in the delay slot + * - fetches the instruction from PC+2 + */ +static inline int handle_unaligned_delayslot(struct pt_regs *regs) +{ + u16 instruction; + + if (copy_from_user(&instruction, (u16 *)(regs->pc+2), 2)) { + /* the instruction-fetch faulted */ + if (user_mode(regs)) + return -EFAULT; + + /* kernel */ + die("delay-slot-insn faulting in handle_unaligned_delayslot", + regs, 0); + } + + return handle_unaligned_ins(instruction,regs); +} + +/* + * handle an instruction that does an unaligned memory access + * - have to be careful of branch delay-slot instructions that fault + * SH3: + * - if the branch would be taken PC points to the branch + * - if the branch would not be taken, PC points to delay-slot + * SH4: + * - PC always points to delayed branch + * - return 0 if handled, -EFAULT if failed (may not return if in kernel) + */ + +/* Macros to determine offset from current PC for branch instructions */ +/* Explicit type coercion is used to force sign extension where needed */ +#define SH_PC_8BIT_OFFSET(instr) ((((signed char)(instr))*2) + 4) +#define SH_PC_12BIT_OFFSET(instr) ((((signed short)(instr<<4))>>3) + 4) + +/* + * XXX: SH-2A needs this too, but it needs an overhaul thanks to mixed 32-bit + * opcodes.. + */ +#ifndef CONFIG_CPU_SH2A +static int handle_unaligned_notify_count = 10; + +static int handle_unaligned_access(u16 instruction, struct pt_regs *regs) +{ + u_int rm; + int ret, index; + + index = (instruction>>8)&15; /* 0x0F00 */ + rm = regs->regs[index]; + + /* shout about the first ten userspace fixups */ + if (user_mode(regs) && handle_unaligned_notify_count>0) { + handle_unaligned_notify_count--; + + printk(KERN_NOTICE "Fixing up unaligned userspace access " + "in \"%s\" pid=%d pc=0x%p ins=0x%04hx\n", + current->comm, task_pid_nr(current), + (u16 *)regs->pc, instruction); + } + + ret = -EFAULT; + switch (instruction&0xF000) { + case 0x0000: + if (instruction==0x000B) { + /* rts */ + ret = handle_unaligned_delayslot(regs); + if (ret==0) + regs->pc = regs->pr; + } + else if ((instruction&0x00FF)==0x0023) { + /* braf @Rm */ + ret = handle_unaligned_delayslot(regs); + if (ret==0) + regs->pc += rm + 4; + } + else if ((instruction&0x00FF)==0x0003) { + /* bsrf @Rm */ + ret = handle_unaligned_delayslot(regs); + if (ret==0) { + regs->pr = regs->pc + 4; + regs->pc += rm + 4; + } + } + else { + /* mov.[bwl] to/from memory via r0+rn */ + goto simple; + } + break; + + case 0x1000: /* mov.l Rm,@(disp,Rn) */ + goto simple; + + case 0x2000: /* mov.[bwl] to memory, possibly with pre-decrement */ + goto simple; + + case 0x4000: + if ((instruction&0x00FF)==0x002B) { + /* jmp @Rm */ + ret = handle_unaligned_delayslot(regs); + if (ret==0) + regs->pc = rm; + } + else if ((instruction&0x00FF)==0x000B) { + /* jsr @Rm */ + ret = handle_unaligned_delayslot(regs); + if (ret==0) { + regs->pr = regs->pc + 4; + regs->pc = rm; + } + } + else { + /* mov.[bwl] to/from memory via r0+rn */ + goto simple; + } + break; + + case 0x5000: /* mov.l @(disp,Rm),Rn */ + goto simple; + + case 0x6000: /* mov.[bwl] from memory, possibly with post-increment */ + goto simple; + + case 0x8000: /* bf lab, bf/s lab, bt lab, bt/s lab */ + switch (instruction&0x0F00) { + case 0x0100: /* mov.w R0,@(disp,Rm) */ + goto simple; + case 0x0500: /* mov.w @(disp,Rm),R0 */ + goto simple; + case 0x0B00: /* bf lab - no delayslot*/ + break; + case 0x0F00: /* bf/s lab */ + ret = handle_unaligned_delayslot(regs); + if (ret==0) { +#if defined(CONFIG_CPU_SH4) || defined(CONFIG_SH7705_CACHE_32KB) + if ((regs->sr & 0x00000001) != 0) + regs->pc += 4; /* next after slot */ + else +#endif + regs->pc += SH_PC_8BIT_OFFSET(instruction); + } + break; + case 0x0900: /* bt lab - no delayslot */ + break; + case 0x0D00: /* bt/s lab */ + ret = handle_unaligned_delayslot(regs); + if (ret==0) { +#if defined(CONFIG_CPU_SH4) || defined(CONFIG_SH7705_CACHE_32KB) + if ((regs->sr & 0x00000001) == 0) + regs->pc += 4; /* next after slot */ + else +#endif + regs->pc += SH_PC_8BIT_OFFSET(instruction); + } + break; + } + break; + + case 0xA000: /* bra label */ + ret = handle_unaligned_delayslot(regs); + if (ret==0) + regs->pc += SH_PC_12BIT_OFFSET(instruction); + break; + + case 0xB000: /* bsr label */ + ret = handle_unaligned_delayslot(regs); + if (ret==0) { + regs->pr = regs->pc + 4; + regs->pc += SH_PC_12BIT_OFFSET(instruction); + } + break; + } + return ret; + + /* handle non-delay-slot instruction */ + simple: + ret = handle_unaligned_ins(instruction,regs); + if (ret==0) + regs->pc += instruction_size(instruction); + return ret; +} +#endif /* CONFIG_CPU_SH2A */ + +#ifdef CONFIG_CPU_HAS_SR_RB +#define lookup_exception_vector(x) \ + __asm__ __volatile__ ("stc r2_bank, %0\n\t" : "=r" ((x))) +#else +#define lookup_exception_vector(x) \ + __asm__ __volatile__ ("mov r4, %0\n\t" : "=r" ((x))) +#endif + +/* + * Handle various address error exceptions: + * - instruction address error: + * misaligned PC + * PC >= 0x80000000 in user mode + * - data address error (read and write) + * misaligned data access + * access to >= 0x80000000 is user mode + * Unfortuntaly we can't distinguish between instruction address error + * and data address errors caused by read accesses. + */ +asmlinkage void do_address_error(struct pt_regs *regs, + unsigned long writeaccess, + unsigned long address) +{ + unsigned long error_code = 0; + mm_segment_t oldfs; + siginfo_t info; +#ifndef CONFIG_CPU_SH2A + u16 instruction; + int tmp; +#endif + + /* Intentional ifdef */ +#ifdef CONFIG_CPU_HAS_SR_RB + lookup_exception_vector(error_code); +#endif + + oldfs = get_fs(); + + if (user_mode(regs)) { + int si_code = BUS_ADRERR; + + local_irq_enable(); + + /* bad PC is not something we can fix */ + if (regs->pc & 1) { + si_code = BUS_ADRALN; + goto uspace_segv; + } + +#ifndef CONFIG_CPU_SH2A + set_fs(USER_DS); + if (copy_from_user(&instruction, (u16 *)(regs->pc), 2)) { + /* Argh. Fault on the instruction itself. + This should never happen non-SMP + */ + set_fs(oldfs); + goto uspace_segv; + } + + tmp = handle_unaligned_access(instruction, regs); + set_fs(oldfs); + + if (tmp==0) + return; /* sorted */ +#endif + +uspace_segv: + printk(KERN_NOTICE "Sending SIGBUS to \"%s\" due to unaligned " + "access (PC %lx PR %lx)\n", current->comm, regs->pc, + regs->pr); + + info.si_signo = SIGBUS; + info.si_errno = 0; + info.si_code = si_code; + info.si_addr = (void __user *)address; + force_sig_info(SIGBUS, &info, current); + } else { + if (regs->pc & 1) + die("unaligned program counter", regs, error_code); + +#ifndef CONFIG_CPU_SH2A + set_fs(KERNEL_DS); + if (copy_from_user(&instruction, (u16 *)(regs->pc), 2)) { + /* Argh. Fault on the instruction itself. + This should never happen non-SMP + */ + set_fs(oldfs); + die("insn faulting in do_address_error", regs, 0); + } + + handle_unaligned_access(instruction, regs); + set_fs(oldfs); +#else + printk(KERN_NOTICE "Killing process \"%s\" due to unaligned " + "access\n", current->comm); + + force_sig(SIGSEGV, current); +#endif + } +} + +#ifdef CONFIG_SH_DSP +/* + * SH-DSP support gerg@snapgear.com. + */ +int is_dsp_inst(struct pt_regs *regs) +{ + unsigned short inst = 0; + + /* + * Safe guard if DSP mode is already enabled or we're lacking + * the DSP altogether. + */ + if (!(current_cpu_data.flags & CPU_HAS_DSP) || (regs->sr & SR_DSP)) + return 0; + + get_user(inst, ((unsigned short *) regs->pc)); + + inst &= 0xf000; + + /* Check for any type of DSP or support instruction */ + if ((inst == 0xf000) || (inst == 0x4000)) + return 1; + + return 0; +} +#else +#define is_dsp_inst(regs) (0) +#endif /* CONFIG_SH_DSP */ + +#ifdef CONFIG_CPU_SH2A +asmlinkage void do_divide_error(unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7, + struct pt_regs __regs) +{ + siginfo_t info; + + switch (r4) { + case TRAP_DIVZERO_ERROR: + info.si_code = FPE_INTDIV; + break; + case TRAP_DIVOVF_ERROR: + info.si_code = FPE_INTOVF; + break; + } + + force_sig_info(SIGFPE, &info, current); +} +#endif + +asmlinkage void do_reserved_inst(unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7, + struct pt_regs __regs) +{ + struct pt_regs *regs = RELOC_HIDE(&__regs, 0); + unsigned long error_code; + struct task_struct *tsk = current; + +#ifdef CONFIG_SH_FPU_EMU + unsigned short inst = 0; + int err; + + get_user(inst, (unsigned short*)regs->pc); + + err = do_fpu_inst(inst, regs); + if (!err) { + regs->pc += instruction_size(inst); + return; + } + /* not a FPU inst. */ +#endif + +#ifdef CONFIG_SH_DSP + /* Check if it's a DSP instruction */ + if (is_dsp_inst(regs)) { + /* Enable DSP mode, and restart instruction. */ + regs->sr |= SR_DSP; + return; + } +#endif + + lookup_exception_vector(error_code); + + local_irq_enable(); + CHK_REMOTE_DEBUG(regs); + force_sig(SIGILL, tsk); + die_if_no_fixup("reserved instruction", regs, error_code); +} + +#ifdef CONFIG_SH_FPU_EMU +static int emulate_branch(unsigned short inst, struct pt_regs* regs) +{ + /* + * bfs: 8fxx: PC+=d*2+4; + * bts: 8dxx: PC+=d*2+4; + * bra: axxx: PC+=D*2+4; + * bsr: bxxx: PC+=D*2+4 after PR=PC+4; + * braf:0x23: PC+=Rn*2+4; + * bsrf:0x03: PC+=Rn*2+4 after PR=PC+4; + * jmp: 4x2b: PC=Rn; + * jsr: 4x0b: PC=Rn after PR=PC+4; + * rts: 000b: PC=PR; + */ + if ((inst & 0xfd00) == 0x8d00) { + regs->pc += SH_PC_8BIT_OFFSET(inst); + return 0; + } + + if ((inst & 0xe000) == 0xa000) { + regs->pc += SH_PC_12BIT_OFFSET(inst); + return 0; + } + + if ((inst & 0xf0df) == 0x0003) { + regs->pc += regs->regs[(inst & 0x0f00) >> 8] + 4; + return 0; + } + + if ((inst & 0xf0df) == 0x400b) { + regs->pc = regs->regs[(inst & 0x0f00) >> 8]; + return 0; + } + + if ((inst & 0xffff) == 0x000b) { + regs->pc = regs->pr; + return 0; + } + + return 1; +} +#endif + +asmlinkage void do_illegal_slot_inst(unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7, + struct pt_regs __regs) +{ + struct pt_regs *regs = RELOC_HIDE(&__regs, 0); + unsigned long error_code; + struct task_struct *tsk = current; +#ifdef CONFIG_SH_FPU_EMU + unsigned short inst = 0; + + get_user(inst, (unsigned short *)regs->pc + 1); + if (!do_fpu_inst(inst, regs)) { + get_user(inst, (unsigned short *)regs->pc); + if (!emulate_branch(inst, regs)) + return; + /* fault in branch.*/ + } + /* not a FPU inst. */ +#endif + + lookup_exception_vector(error_code); + + local_irq_enable(); + CHK_REMOTE_DEBUG(regs); + force_sig(SIGILL, tsk); + die_if_no_fixup("illegal slot instruction", regs, error_code); +} + +asmlinkage void do_exception_error(unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7, + struct pt_regs __regs) +{ + struct pt_regs *regs = RELOC_HIDE(&__regs, 0); + long ex; + + lookup_exception_vector(ex); + die_if_kernel("exception", regs, ex); +} + +#if defined(CONFIG_SH_STANDARD_BIOS) +void *gdb_vbr_vector; + +static inline void __init gdb_vbr_init(void) +{ + register unsigned long vbr; + + /* + * Read the old value of the VBR register to initialise + * the vector through which debug and BIOS traps are + * delegated by the Linux trap handler. + */ + asm volatile("stc vbr, %0" : "=r" (vbr)); + + gdb_vbr_vector = (void *)(vbr + 0x100); + printk("Setting GDB trap vector to 0x%08lx\n", + (unsigned long)gdb_vbr_vector); +} +#endif + +void __cpuinit per_cpu_trap_init(void) +{ + extern void *vbr_base; + +#ifdef CONFIG_SH_STANDARD_BIOS + if (raw_smp_processor_id() == 0) + gdb_vbr_init(); +#endif + + /* NOTE: The VBR value should be at P1 + (or P2, virtural "fixed" address space). + It's definitely should not in physical address. */ + + asm volatile("ldc %0, vbr" + : /* no output */ + : "r" (&vbr_base) + : "memory"); +} + +void *set_exception_table_vec(unsigned int vec, void *handler) +{ + extern void *exception_handling_table[]; + void *old_handler; + + old_handler = exception_handling_table[vec]; + exception_handling_table[vec] = handler; + return old_handler; +} + +void __init trap_init(void) +{ + set_exception_table_vec(TRAP_RESERVED_INST, do_reserved_inst); + set_exception_table_vec(TRAP_ILLEGAL_SLOT_INST, do_illegal_slot_inst); + +#if defined(CONFIG_CPU_SH4) && !defined(CONFIG_SH_FPU) || \ + defined(CONFIG_SH_FPU_EMU) + /* + * For SH-4 lacking an FPU, treat floating point instructions as + * reserved. They'll be handled in the math-emu case, or faulted on + * otherwise. + */ + set_exception_table_evt(0x800, do_reserved_inst); + set_exception_table_evt(0x820, do_illegal_slot_inst); +#elif defined(CONFIG_SH_FPU) +#ifdef CONFIG_CPU_SUBTYPE_SHX3 + set_exception_table_evt(0xd80, fpu_state_restore_trap_handler); + set_exception_table_evt(0xda0, fpu_state_restore_trap_handler); +#else + set_exception_table_evt(0x800, fpu_state_restore_trap_handler); + set_exception_table_evt(0x820, fpu_state_restore_trap_handler); +#endif +#endif + +#ifdef CONFIG_CPU_SH2 + set_exception_table_vec(TRAP_ADDRESS_ERROR, address_error_trap_handler); +#endif +#ifdef CONFIG_CPU_SH2A + set_exception_table_vec(TRAP_DIVZERO_ERROR, do_divide_error); + set_exception_table_vec(TRAP_DIVOVF_ERROR, do_divide_error); +#endif + + /* Setup VBR for boot cpu */ + per_cpu_trap_init(); +} + +void show_trace(struct task_struct *tsk, unsigned long *sp, + struct pt_regs *regs) +{ + unsigned long addr; + + if (regs && user_mode(regs)) + return; + + printk("\nCall trace: "); +#ifdef CONFIG_KALLSYMS + printk("\n"); +#endif + + while (!kstack_end(sp)) { + addr = *sp++; + if (kernel_text_address(addr)) + print_ip_sym(addr); + } + + printk("\n"); + + if (!tsk) + tsk = current; + + debug_show_held_locks(tsk); +} + +void show_stack(struct task_struct *tsk, unsigned long *sp) +{ + unsigned long stack; + + if (!tsk) + tsk = current; + if (tsk == current) + sp = (unsigned long *)current_stack_pointer; + else + sp = (unsigned long *)tsk->thread.sp; + + stack = (unsigned long)sp; + dump_mem("Stack: ", stack, THREAD_SIZE + + (unsigned long)task_stack_page(tsk)); + show_trace(tsk, sp, NULL); +} + +void dump_stack(void) +{ + show_stack(NULL, NULL); +} +EXPORT_SYMBOL(dump_stack); diff --git a/arch/sh/kernel/traps_64.c b/arch/sh/kernel/traps_64.c new file mode 100644 index 000000000000..c0b3c6f6edb5 --- /dev/null +++ b/arch/sh/kernel/traps_64.c @@ -0,0 +1,975 @@ +/* + * arch/sh/kernel/traps_64.c + * + * Copyright (C) 2000, 2001 Paolo Alberelli + * Copyright (C) 2003, 2004 Paul Mundt + * Copyright (C) 2003, 2004 Richard Curnow + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/sched.h> +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/errno.h> +#include <linux/ptrace.h> +#include <linux/timer.h> +#include <linux/mm.h> +#include <linux/smp.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/spinlock.h> +#include <linux/kallsyms.h> +#include <linux/interrupt.h> +#include <linux/sysctl.h> +#include <linux/module.h> +#include <asm/system.h> +#include <asm/uaccess.h> +#include <asm/io.h> +#include <asm/atomic.h> +#include <asm/processor.h> +#include <asm/pgtable.h> + +#undef DEBUG_EXCEPTION +#ifdef DEBUG_EXCEPTION +/* implemented in ../lib/dbg.c */ +extern void show_excp_regs(char *fname, int trapnr, int signr, + struct pt_regs *regs); +#else +#define show_excp_regs(a, b, c, d) +#endif + +static void do_unhandled_exception(int trapnr, int signr, char *str, char *fn_name, + unsigned long error_code, struct pt_regs *regs, struct task_struct *tsk); + +#define DO_ERROR(trapnr, signr, str, name, tsk) \ +asmlinkage void do_##name(unsigned long error_code, struct pt_regs *regs) \ +{ \ + do_unhandled_exception(trapnr, signr, str, __stringify(name), error_code, regs, current); \ +} + +spinlock_t die_lock; + +void die(const char * str, struct pt_regs * regs, long err) +{ + console_verbose(); + spin_lock_irq(&die_lock); + printk("%s: %lx\n", str, (err & 0xffffff)); + show_regs(regs); + spin_unlock_irq(&die_lock); + do_exit(SIGSEGV); +} + +static inline void die_if_kernel(const char * str, struct pt_regs * regs, long err) +{ + if (!user_mode(regs)) + die(str, regs, err); +} + +static void die_if_no_fixup(const char * str, struct pt_regs * regs, long err) +{ + if (!user_mode(regs)) { + const struct exception_table_entry *fixup; + fixup = search_exception_tables(regs->pc); + if (fixup) { + regs->pc = fixup->fixup; + return; + } + die(str, regs, err); + } +} + +DO_ERROR(13, SIGILL, "illegal slot instruction", illegal_slot_inst, current) +DO_ERROR(87, SIGSEGV, "address error (exec)", address_error_exec, current) + + +/* Implement misaligned load/store handling for kernel (and optionally for user + mode too). Limitation : only SHmedia mode code is handled - there is no + handling at all for misaligned accesses occurring in SHcompact code yet. */ + +static int misaligned_fixup(struct pt_regs *regs); + +asmlinkage void do_address_error_load(unsigned long error_code, struct pt_regs *regs) +{ + if (misaligned_fixup(regs) < 0) { + do_unhandled_exception(7, SIGSEGV, "address error(load)", + "do_address_error_load", + error_code, regs, current); + } + return; +} + +asmlinkage void do_address_error_store(unsigned long error_code, struct pt_regs *regs) +{ + if (misaligned_fixup(regs) < 0) { + do_unhandled_exception(8, SIGSEGV, "address error(store)", + "do_address_error_store", + error_code, regs, current); + } + return; +} + +#if defined(CONFIG_SH64_ID2815_WORKAROUND) + +#define OPCODE_INVALID 0 +#define OPCODE_USER_VALID 1 +#define OPCODE_PRIV_VALID 2 + +/* getcon/putcon - requires checking which control register is referenced. */ +#define OPCODE_CTRL_REG 3 + +/* Table of valid opcodes for SHmedia mode. + Form a 10-bit value by concatenating the major/minor opcodes i.e. + opcode[31:26,20:16]. The 6 MSBs of this value index into the following + array. The 4 LSBs select the bit-pair in the entry (bits 1:0 correspond to + LSBs==4'b0000 etc). */ +static unsigned long shmedia_opcode_table[64] = { + 0x55554044,0x54445055,0x15141514,0x14541414,0x00000000,0x10001000,0x01110055,0x04050015, + 0x00000444,0xc0000000,0x44545515,0x40405555,0x55550015,0x10005555,0x55555505,0x04050000, + 0x00000555,0x00000404,0x00040445,0x15151414,0x00000000,0x00000000,0x00000000,0x00000000, + 0x00000055,0x40404444,0x00000404,0xc0009495,0x00000000,0x00000000,0x00000000,0x00000000, + 0x55555555,0x55555555,0x55555555,0x55555555,0x55555555,0x55555555,0x55555555,0x55555555, + 0x55555555,0x55555555,0x55555555,0x55555555,0x55555555,0x55555555,0x55555555,0x55555555, + 0x80005050,0x04005055,0x55555555,0x55555555,0x55555555,0x55555555,0x55555555,0x55555555, + 0x81055554,0x00000404,0x55555555,0x55555555,0x00000000,0x00000000,0x00000000,0x00000000 +}; + +void do_reserved_inst(unsigned long error_code, struct pt_regs *regs) +{ + /* Workaround SH5-101 cut2 silicon defect #2815 : + in some situations, inter-mode branches from SHcompact -> SHmedia + which should take ITLBMISS or EXECPROT exceptions at the target + falsely take RESINST at the target instead. */ + + unsigned long opcode = 0x6ff4fff0; /* guaranteed reserved opcode */ + unsigned long pc, aligned_pc; + int get_user_error; + int trapnr = 12; + int signr = SIGILL; + char *exception_name = "reserved_instruction"; + + pc = regs->pc; + if ((pc & 3) == 1) { + /* SHmedia : check for defect. This requires executable vmas + to be readable too. */ + aligned_pc = pc & ~3; + if (!access_ok(VERIFY_READ, aligned_pc, sizeof(unsigned long))) { + get_user_error = -EFAULT; + } else { + get_user_error = __get_user(opcode, (unsigned long *)aligned_pc); + } + if (get_user_error >= 0) { + unsigned long index, shift; + unsigned long major, minor, combined; + unsigned long reserved_field; + reserved_field = opcode & 0xf; /* These bits are currently reserved as zero in all valid opcodes */ + major = (opcode >> 26) & 0x3f; + minor = (opcode >> 16) & 0xf; + combined = (major << 4) | minor; + index = major; + shift = minor << 1; + if (reserved_field == 0) { + int opcode_state = (shmedia_opcode_table[index] >> shift) & 0x3; + switch (opcode_state) { + case OPCODE_INVALID: + /* Trap. */ + break; + case OPCODE_USER_VALID: + /* Restart the instruction : the branch to the instruction will now be from an RTE + not from SHcompact so the silicon defect won't be triggered. */ + return; + case OPCODE_PRIV_VALID: + if (!user_mode(regs)) { + /* Should only ever get here if a module has + SHcompact code inside it. If so, the same fix up is needed. */ + return; /* same reason */ + } + /* Otherwise, user mode trying to execute a privileged instruction - + fall through to trap. */ + break; + case OPCODE_CTRL_REG: + /* If in privileged mode, return as above. */ + if (!user_mode(regs)) return; + /* In user mode ... */ + if (combined == 0x9f) { /* GETCON */ + unsigned long regno = (opcode >> 20) & 0x3f; + if (regno >= 62) { + return; + } + /* Otherwise, reserved or privileged control register, => trap */ + } else if (combined == 0x1bf) { /* PUTCON */ + unsigned long regno = (opcode >> 4) & 0x3f; + if (regno >= 62) { + return; + } + /* Otherwise, reserved or privileged control register, => trap */ + } else { + /* Trap */ + } + break; + default: + /* Fall through to trap. */ + break; + } + } + /* fall through to normal resinst processing */ + } else { + /* Error trying to read opcode. This typically means a + real fault, not a RESINST any more. So change the + codes. */ + trapnr = 87; + exception_name = "address error (exec)"; + signr = SIGSEGV; + } + } + + do_unhandled_exception(trapnr, signr, exception_name, "do_reserved_inst", error_code, regs, current); +} + +#else /* CONFIG_SH64_ID2815_WORKAROUND */ + +/* If the workaround isn't needed, this is just a straightforward reserved + instruction */ +DO_ERROR(12, SIGILL, "reserved instruction", reserved_inst, current) + +#endif /* CONFIG_SH64_ID2815_WORKAROUND */ + +/* Called with interrupts disabled */ +asmlinkage void do_exception_error(unsigned long ex, struct pt_regs *regs) +{ + show_excp_regs(__FUNCTION__, -1, -1, regs); + die_if_kernel("exception", regs, ex); +} + +int do_unknown_trapa(unsigned long scId, struct pt_regs *regs) +{ + /* Syscall debug */ + printk("System call ID error: [0x1#args:8 #syscall:16 0x%lx]\n", scId); + + die_if_kernel("unknown trapa", regs, scId); + + return -ENOSYS; +} + +void show_stack(struct task_struct *tsk, unsigned long *sp) +{ +#ifdef CONFIG_KALLSYMS + extern void sh64_unwind(struct pt_regs *regs); + struct pt_regs *regs; + + regs = tsk ? tsk->thread.kregs : NULL; + + sh64_unwind(regs); +#else + printk(KERN_ERR "Can't backtrace on sh64 without CONFIG_KALLSYMS\n"); +#endif +} + +void show_task(unsigned long *sp) +{ + show_stack(NULL, sp); +} + +void dump_stack(void) +{ + show_task(NULL); +} +/* Needed by any user of WARN_ON in view of the defn in include/asm-sh/bug.h */ +EXPORT_SYMBOL(dump_stack); + +static void do_unhandled_exception(int trapnr, int signr, char *str, char *fn_name, + unsigned long error_code, struct pt_regs *regs, struct task_struct *tsk) +{ + show_excp_regs(fn_name, trapnr, signr, regs); + tsk->thread.error_code = error_code; + tsk->thread.trap_no = trapnr; + + if (user_mode(regs)) + force_sig(signr, tsk); + + die_if_no_fixup(str, regs, error_code); +} + +static int read_opcode(unsigned long long pc, unsigned long *result_opcode, int from_user_mode) +{ + int get_user_error; + unsigned long aligned_pc; + unsigned long opcode; + + if ((pc & 3) == 1) { + /* SHmedia */ + aligned_pc = pc & ~3; + if (from_user_mode) { + if (!access_ok(VERIFY_READ, aligned_pc, sizeof(unsigned long))) { + get_user_error = -EFAULT; + } else { + get_user_error = __get_user(opcode, (unsigned long *)aligned_pc); + *result_opcode = opcode; + } + return get_user_error; + } else { + /* If the fault was in the kernel, we can either read + * this directly, or if not, we fault. + */ + *result_opcode = *(unsigned long *) aligned_pc; + return 0; + } + } else if ((pc & 1) == 0) { + /* SHcompact */ + /* TODO : provide handling for this. We don't really support + user-mode SHcompact yet, and for a kernel fault, this would + have to come from a module built for SHcompact. */ + return -EFAULT; + } else { + /* misaligned */ + return -EFAULT; + } +} + +static int address_is_sign_extended(__u64 a) +{ + __u64 b; +#if (NEFF == 32) + b = (__u64)(__s64)(__s32)(a & 0xffffffffUL); + return (b == a) ? 1 : 0; +#else +#error "Sign extend check only works for NEFF==32" +#endif +} + +static int generate_and_check_address(struct pt_regs *regs, + __u32 opcode, + int displacement_not_indexed, + int width_shift, + __u64 *address) +{ + /* return -1 for fault, 0 for OK */ + + __u64 base_address, addr; + int basereg; + + basereg = (opcode >> 20) & 0x3f; + base_address = regs->regs[basereg]; + if (displacement_not_indexed) { + __s64 displacement; + displacement = (opcode >> 10) & 0x3ff; + displacement = ((displacement << 54) >> 54); /* sign extend */ + addr = (__u64)((__s64)base_address + (displacement << width_shift)); + } else { + __u64 offset; + int offsetreg; + offsetreg = (opcode >> 10) & 0x3f; + offset = regs->regs[offsetreg]; + addr = base_address + offset; + } + + /* Check sign extended */ + if (!address_is_sign_extended(addr)) { + return -1; + } + +#if defined(CONFIG_SH64_USER_MISALIGNED_FIXUP) + /* Check accessible. For misaligned access in the kernel, assume the + address is always accessible (and if not, just fault when the + load/store gets done.) */ + if (user_mode(regs)) { + if (addr >= TASK_SIZE) { + return -1; + } + /* Do access_ok check later - it depends on whether it's a load or a store. */ + } +#endif + + *address = addr; + return 0; +} + +/* Default value as for sh */ +#if defined(CONFIG_SH64_USER_MISALIGNED_FIXUP) +static int user_mode_unaligned_fixup_count = 10; +static int user_mode_unaligned_fixup_enable = 1; +#endif + +static int kernel_mode_unaligned_fixup_count = 32; + +static void misaligned_kernel_word_load(__u64 address, int do_sign_extend, __u64 *result) +{ + unsigned short x; + unsigned char *p, *q; + p = (unsigned char *) (int) address; + q = (unsigned char *) &x; + q[0] = p[0]; + q[1] = p[1]; + + if (do_sign_extend) { + *result = (__u64)(__s64) *(short *) &x; + } else { + *result = (__u64) x; + } +} + +static void misaligned_kernel_word_store(__u64 address, __u64 value) +{ + unsigned short x; + unsigned char *p, *q; + p = (unsigned char *) (int) address; + q = (unsigned char *) &x; + + x = (__u16) value; + p[0] = q[0]; + p[1] = q[1]; +} + +static int misaligned_load(struct pt_regs *regs, + __u32 opcode, + int displacement_not_indexed, + int width_shift, + int do_sign_extend) +{ + /* Return -1 for a fault, 0 for OK */ + int error; + int destreg; + __u64 address; + + error = generate_and_check_address(regs, opcode, + displacement_not_indexed, width_shift, &address); + if (error < 0) { + return error; + } + + destreg = (opcode >> 4) & 0x3f; +#if defined(CONFIG_SH64_USER_MISALIGNED_FIXUP) + if (user_mode(regs)) { + __u64 buffer; + + if (!access_ok(VERIFY_READ, (unsigned long) address, 1UL<<width_shift)) { + return -1; + } + + if (__copy_user(&buffer, (const void *)(int)address, (1 << width_shift)) > 0) { + return -1; /* fault */ + } + switch (width_shift) { + case 1: + if (do_sign_extend) { + regs->regs[destreg] = (__u64)(__s64) *(__s16 *) &buffer; + } else { + regs->regs[destreg] = (__u64) *(__u16 *) &buffer; + } + break; + case 2: + regs->regs[destreg] = (__u64)(__s64) *(__s32 *) &buffer; + break; + case 3: + regs->regs[destreg] = buffer; + break; + default: + printk("Unexpected width_shift %d in misaligned_load, PC=%08lx\n", + width_shift, (unsigned long) regs->pc); + break; + } + } else +#endif + { + /* kernel mode - we can take short cuts since if we fault, it's a genuine bug */ + __u64 lo, hi; + + switch (width_shift) { + case 1: + misaligned_kernel_word_load(address, do_sign_extend, ®s->regs[destreg]); + break; + case 2: + asm ("ldlo.l %1, 0, %0" : "=r" (lo) : "r" (address)); + asm ("ldhi.l %1, 3, %0" : "=r" (hi) : "r" (address)); + regs->regs[destreg] = lo | hi; + break; + case 3: + asm ("ldlo.q %1, 0, %0" : "=r" (lo) : "r" (address)); + asm ("ldhi.q %1, 7, %0" : "=r" (hi) : "r" (address)); + regs->regs[destreg] = lo | hi; + break; + + default: + printk("Unexpected width_shift %d in misaligned_load, PC=%08lx\n", + width_shift, (unsigned long) regs->pc); + break; + } + } + + return 0; + +} + +static int misaligned_store(struct pt_regs *regs, + __u32 opcode, + int displacement_not_indexed, + int width_shift) +{ + /* Return -1 for a fault, 0 for OK */ + int error; + int srcreg; + __u64 address; + + error = generate_and_check_address(regs, opcode, + displacement_not_indexed, width_shift, &address); + if (error < 0) { + return error; + } + + srcreg = (opcode >> 4) & 0x3f; +#if defined(CONFIG_SH64_USER_MISALIGNED_FIXUP) + if (user_mode(regs)) { + __u64 buffer; + + if (!access_ok(VERIFY_WRITE, (unsigned long) address, 1UL<<width_shift)) { + return -1; + } + + switch (width_shift) { + case 1: + *(__u16 *) &buffer = (__u16) regs->regs[srcreg]; + break; + case 2: + *(__u32 *) &buffer = (__u32) regs->regs[srcreg]; + break; + case 3: + buffer = regs->regs[srcreg]; + break; + default: + printk("Unexpected width_shift %d in misaligned_store, PC=%08lx\n", + width_shift, (unsigned long) regs->pc); + break; + } + + if (__copy_user((void *)(int)address, &buffer, (1 << width_shift)) > 0) { + return -1; /* fault */ + } + } else +#endif + { + /* kernel mode - we can take short cuts since if we fault, it's a genuine bug */ + __u64 val = regs->regs[srcreg]; + + switch (width_shift) { + case 1: + misaligned_kernel_word_store(address, val); + break; + case 2: + asm ("stlo.l %1, 0, %0" : : "r" (val), "r" (address)); + asm ("sthi.l %1, 3, %0" : : "r" (val), "r" (address)); + break; + case 3: + asm ("stlo.q %1, 0, %0" : : "r" (val), "r" (address)); + asm ("sthi.q %1, 7, %0" : : "r" (val), "r" (address)); + break; + + default: + printk("Unexpected width_shift %d in misaligned_store, PC=%08lx\n", + width_shift, (unsigned long) regs->pc); + break; + } + } + + return 0; + +} + +#if defined(CONFIG_SH64_USER_MISALIGNED_FIXUP) +/* Never need to fix up misaligned FPU accesses within the kernel since that's a real + error. */ +static int misaligned_fpu_load(struct pt_regs *regs, + __u32 opcode, + int displacement_not_indexed, + int width_shift, + int do_paired_load) +{ + /* Return -1 for a fault, 0 for OK */ + int error; + int destreg; + __u64 address; + + error = generate_and_check_address(regs, opcode, + displacement_not_indexed, width_shift, &address); + if (error < 0) { + return error; + } + + destreg = (opcode >> 4) & 0x3f; + if (user_mode(regs)) { + __u64 buffer; + __u32 buflo, bufhi; + + if (!access_ok(VERIFY_READ, (unsigned long) address, 1UL<<width_shift)) { + return -1; + } + + if (__copy_user(&buffer, (const void *)(int)address, (1 << width_shift)) > 0) { + return -1; /* fault */ + } + /* 'current' may be the current owner of the FPU state, so + context switch the registers into memory so they can be + indexed by register number. */ + if (last_task_used_math == current) { + enable_fpu(); + save_fpu(current, regs); + disable_fpu(); + last_task_used_math = NULL; + regs->sr |= SR_FD; + } + + buflo = *(__u32*) &buffer; + bufhi = *(1 + (__u32*) &buffer); + + switch (width_shift) { + case 2: + current->thread.fpu.hard.fp_regs[destreg] = buflo; + break; + case 3: + if (do_paired_load) { + current->thread.fpu.hard.fp_regs[destreg] = buflo; + current->thread.fpu.hard.fp_regs[destreg+1] = bufhi; + } else { +#if defined(CONFIG_LITTLE_ENDIAN) + current->thread.fpu.hard.fp_regs[destreg] = bufhi; + current->thread.fpu.hard.fp_regs[destreg+1] = buflo; +#else + current->thread.fpu.hard.fp_regs[destreg] = buflo; + current->thread.fpu.hard.fp_regs[destreg+1] = bufhi; +#endif + } + break; + default: + printk("Unexpected width_shift %d in misaligned_fpu_load, PC=%08lx\n", + width_shift, (unsigned long) regs->pc); + break; + } + return 0; + } else { + die ("Misaligned FPU load inside kernel", regs, 0); + return -1; + } + + +} + +static int misaligned_fpu_store(struct pt_regs *regs, + __u32 opcode, + int displacement_not_indexed, + int width_shift, + int do_paired_load) +{ + /* Return -1 for a fault, 0 for OK */ + int error; + int srcreg; + __u64 address; + + error = generate_and_check_address(regs, opcode, + displacement_not_indexed, width_shift, &address); + if (error < 0) { + return error; + } + + srcreg = (opcode >> 4) & 0x3f; + if (user_mode(regs)) { + __u64 buffer; + /* Initialise these to NaNs. */ + __u32 buflo=0xffffffffUL, bufhi=0xffffffffUL; + + if (!access_ok(VERIFY_WRITE, (unsigned long) address, 1UL<<width_shift)) { + return -1; + } + + /* 'current' may be the current owner of the FPU state, so + context switch the registers into memory so they can be + indexed by register number. */ + if (last_task_used_math == current) { + enable_fpu(); + save_fpu(current, regs); + disable_fpu(); + last_task_used_math = NULL; + regs->sr |= SR_FD; + } + + switch (width_shift) { + case 2: + buflo = current->thread.fpu.hard.fp_regs[srcreg]; + break; + case 3: + if (do_paired_load) { + buflo = current->thread.fpu.hard.fp_regs[srcreg]; + bufhi = current->thread.fpu.hard.fp_regs[srcreg+1]; + } else { +#if defined(CONFIG_LITTLE_ENDIAN) + bufhi = current->thread.fpu.hard.fp_regs[srcreg]; + buflo = current->thread.fpu.hard.fp_regs[srcreg+1]; +#else + buflo = current->thread.fpu.hard.fp_regs[srcreg]; + bufhi = current->thread.fpu.hard.fp_regs[srcreg+1]; +#endif + } + break; + default: + printk("Unexpected width_shift %d in misaligned_fpu_store, PC=%08lx\n", + width_shift, (unsigned long) regs->pc); + break; + } + + *(__u32*) &buffer = buflo; + *(1 + (__u32*) &buffer) = bufhi; + if (__copy_user((void *)(int)address, &buffer, (1 << width_shift)) > 0) { + return -1; /* fault */ + } + return 0; + } else { + die ("Misaligned FPU load inside kernel", regs, 0); + return -1; + } +} +#endif + +static int misaligned_fixup(struct pt_regs *regs) +{ + unsigned long opcode; + int error; + int major, minor; + +#if !defined(CONFIG_SH64_USER_MISALIGNED_FIXUP) + /* Never fixup user mode misaligned accesses without this option enabled. */ + return -1; +#else + if (!user_mode_unaligned_fixup_enable) return -1; +#endif + + error = read_opcode(regs->pc, &opcode, user_mode(regs)); + if (error < 0) { + return error; + } + major = (opcode >> 26) & 0x3f; + minor = (opcode >> 16) & 0xf; + +#if defined(CONFIG_SH64_USER_MISALIGNED_FIXUP) + if (user_mode(regs) && (user_mode_unaligned_fixup_count > 0)) { + --user_mode_unaligned_fixup_count; + /* Only do 'count' worth of these reports, to remove a potential DoS against syslog */ + printk("Fixing up unaligned userspace access in \"%s\" pid=%d pc=0x%08x ins=0x%08lx\n", + current->comm, task_pid_nr(current), (__u32)regs->pc, opcode); + } else +#endif + if (!user_mode(regs) && (kernel_mode_unaligned_fixup_count > 0)) { + --kernel_mode_unaligned_fixup_count; + if (in_interrupt()) { + printk("Fixing up unaligned kernelspace access in interrupt pc=0x%08x ins=0x%08lx\n", + (__u32)regs->pc, opcode); + } else { + printk("Fixing up unaligned kernelspace access in \"%s\" pid=%d pc=0x%08x ins=0x%08lx\n", + current->comm, task_pid_nr(current), (__u32)regs->pc, opcode); + } + } + + + switch (major) { + case (0x84>>2): /* LD.W */ + error = misaligned_load(regs, opcode, 1, 1, 1); + break; + case (0xb0>>2): /* LD.UW */ + error = misaligned_load(regs, opcode, 1, 1, 0); + break; + case (0x88>>2): /* LD.L */ + error = misaligned_load(regs, opcode, 1, 2, 1); + break; + case (0x8c>>2): /* LD.Q */ + error = misaligned_load(regs, opcode, 1, 3, 0); + break; + + case (0xa4>>2): /* ST.W */ + error = misaligned_store(regs, opcode, 1, 1); + break; + case (0xa8>>2): /* ST.L */ + error = misaligned_store(regs, opcode, 1, 2); + break; + case (0xac>>2): /* ST.Q */ + error = misaligned_store(regs, opcode, 1, 3); + break; + + case (0x40>>2): /* indexed loads */ + switch (minor) { + case 0x1: /* LDX.W */ + error = misaligned_load(regs, opcode, 0, 1, 1); + break; + case 0x5: /* LDX.UW */ + error = misaligned_load(regs, opcode, 0, 1, 0); + break; + case 0x2: /* LDX.L */ + error = misaligned_load(regs, opcode, 0, 2, 1); + break; + case 0x3: /* LDX.Q */ + error = misaligned_load(regs, opcode, 0, 3, 0); + break; + default: + error = -1; + break; + } + break; + + case (0x60>>2): /* indexed stores */ + switch (minor) { + case 0x1: /* STX.W */ + error = misaligned_store(regs, opcode, 0, 1); + break; + case 0x2: /* STX.L */ + error = misaligned_store(regs, opcode, 0, 2); + break; + case 0x3: /* STX.Q */ + error = misaligned_store(regs, opcode, 0, 3); + break; + default: + error = -1; + break; + } + break; + +#if defined(CONFIG_SH64_USER_MISALIGNED_FIXUP) + case (0x94>>2): /* FLD.S */ + error = misaligned_fpu_load(regs, opcode, 1, 2, 0); + break; + case (0x98>>2): /* FLD.P */ + error = misaligned_fpu_load(regs, opcode, 1, 3, 1); + break; + case (0x9c>>2): /* FLD.D */ + error = misaligned_fpu_load(regs, opcode, 1, 3, 0); + break; + case (0x1c>>2): /* floating indexed loads */ + switch (minor) { + case 0x8: /* FLDX.S */ + error = misaligned_fpu_load(regs, opcode, 0, 2, 0); + break; + case 0xd: /* FLDX.P */ + error = misaligned_fpu_load(regs, opcode, 0, 3, 1); + break; + case 0x9: /* FLDX.D */ + error = misaligned_fpu_load(regs, opcode, 0, 3, 0); + break; + default: + error = -1; + break; + } + break; + case (0xb4>>2): /* FLD.S */ + error = misaligned_fpu_store(regs, opcode, 1, 2, 0); + break; + case (0xb8>>2): /* FLD.P */ + error = misaligned_fpu_store(regs, opcode, 1, 3, 1); + break; + case (0xbc>>2): /* FLD.D */ + error = misaligned_fpu_store(regs, opcode, 1, 3, 0); + break; + case (0x3c>>2): /* floating indexed stores */ + switch (minor) { + case 0x8: /* FSTX.S */ + error = misaligned_fpu_store(regs, opcode, 0, 2, 0); + break; + case 0xd: /* FSTX.P */ + error = misaligned_fpu_store(regs, opcode, 0, 3, 1); + break; + case 0x9: /* FSTX.D */ + error = misaligned_fpu_store(regs, opcode, 0, 3, 0); + break; + default: + error = -1; + break; + } + break; +#endif + + default: + /* Fault */ + error = -1; + break; + } + + if (error < 0) { + return error; + } else { + regs->pc += 4; /* Skip the instruction that's just been emulated */ + return 0; + } + +} + +static ctl_table unaligned_table[] = { + { + .ctl_name = CTL_UNNUMBERED, + .procname = "kernel_reports", + .data = &kernel_mode_unaligned_fixup_count, + .maxlen = sizeof(int), + .mode = 0644, + .proc_handler = &proc_dointvec + }, +#if defined(CONFIG_SH64_USER_MISALIGNED_FIXUP) + { + .ctl_name = CTL_UNNUMBERED, + .procname = "user_reports", + .data = &user_mode_unaligned_fixup_count, + .maxlen = sizeof(int), + .mode = 0644, + .proc_handler = &proc_dointvec + }, + { + .ctl_name = CTL_UNNUMBERED, + .procname = "user_enable", + .data = &user_mode_unaligned_fixup_enable, + .maxlen = sizeof(int), + .mode = 0644, + .proc_handler = &proc_dointvec}, +#endif + {} +}; + +static ctl_table unaligned_root[] = { + { + .ctl_name = CTL_UNNUMBERED, + .procname = "unaligned_fixup", + .mode = 0555, + unaligned_table + }, + {} +}; + +static ctl_table sh64_root[] = { + { + .ctl_name = CTL_UNNUMBERED, + .procname = "sh64", + .mode = 0555, + .child = unaligned_root + }, + {} +}; +static struct ctl_table_header *sysctl_header; +static int __init init_sysctl(void) +{ + sysctl_header = register_sysctl_table(sh64_root); + return 0; +} + +__initcall(init_sysctl); + + +asmlinkage void do_debug_interrupt(unsigned long code, struct pt_regs *regs) +{ + u64 peek_real_address_q(u64 addr); + u64 poke_real_address_q(u64 addr, u64 val); + unsigned long long DM_EXP_CAUSE_PHY = 0x0c100010; + unsigned long long exp_cause; + /* It's not worth ioremapping the debug module registers for the amount + of access we make to them - just go direct to their physical + addresses. */ + exp_cause = peek_real_address_q(DM_EXP_CAUSE_PHY); + if (exp_cause & ~4) { + printk("DM.EXP_CAUSE had unexpected bits set (=%08lx)\n", + (unsigned long)(exp_cause & 0xffffffff)); + } + show_state(); + /* Clear all DEBUGINT causes */ + poke_real_address_q(DM_EXP_CAUSE_PHY, 0x0); +} diff --git a/arch/sh/kernel/vmlinux.lds.S b/arch/sh/kernel/vmlinux.lds.S index 0956fb3681a3..d7d4991f32af 100644 --- a/arch/sh/kernel/vmlinux.lds.S +++ b/arch/sh/kernel/vmlinux.lds.S @@ -1,138 +1,5 @@ -/* - * ld script to make SuperH Linux kernel - * Written by Niibe Yutaka - */ -#include <asm/thread_info.h> -#include <asm/cache.h> -#include <asm-generic/vmlinux.lds.h> - -#ifdef CONFIG_CPU_LITTLE_ENDIAN -OUTPUT_FORMAT("elf32-sh-linux", "elf32-sh-linux", "elf32-sh-linux") +#ifdef CONFIG_SUPERH32 +# include "vmlinux_32.lds.S" #else -OUTPUT_FORMAT("elf32-shbig-linux", "elf32-shbig-linux", "elf32-shbig-linux") +# include "vmlinux_64.lds.S" #endif -OUTPUT_ARCH(sh) -ENTRY(_start) -SECTIONS -{ - . = CONFIG_PAGE_OFFSET + CONFIG_MEMORY_START + CONFIG_ZERO_PAGE_OFFSET; - _text = .; /* Text and read-only data */ - - .empty_zero_page : { - *(.empty_zero_page) - } = 0 - - .text : { - *(.text.head) - TEXT_TEXT - SCHED_TEXT - LOCK_TEXT - KPROBES_TEXT - *(.fixup) - *(.gnu.warning) - } = 0x0009 - - . = ALIGN(16); /* Exception table */ - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - _etext = .; /* End of text section */ - - BUG_TABLE - NOTES - RO_DATA(PAGE_SIZE) - - . = ALIGN(THREAD_SIZE); - .data : { /* Data */ - *(.data.init_task) - - . = ALIGN(L1_CACHE_BYTES); - *(.data.cacheline_aligned) - - . = ALIGN(L1_CACHE_BYTES); - *(.data.read_mostly) - - . = ALIGN(PAGE_SIZE); - *(.data.page_aligned) - - __nosave_begin = .; - *(.data.nosave) - . = ALIGN(PAGE_SIZE); - __nosave_end = .; - - DATA_DATA - CONSTRUCTORS - } - - _edata = .; /* End of data section */ - - . = ALIGN(PAGE_SIZE); /* Init code and data */ - __init_begin = .; - _sinittext = .; - .init.text : { *(.init.text) } - _einittext = .; - .init.data : { *(.init.data) } - - . = ALIGN(16); - __setup_start = .; - .init.setup : { *(.init.setup) } - __setup_end = .; - - __initcall_start = .; - .initcall.init : { - INITCALLS - } - __initcall_end = .; - __con_initcall_start = .; - .con_initcall.init : { *(.con_initcall.init) } - __con_initcall_end = .; - - SECURITY_INIT - -#ifdef CONFIG_BLK_DEV_INITRD - . = ALIGN(PAGE_SIZE); - __initramfs_start = .; - .init.ramfs : { *(.init.ramfs) } - __initramfs_end = .; -#endif - - . = ALIGN(4); - __machvec_start = .; - .machvec.init : { *(.machvec.init) } - __machvec_end = .; - - PERCPU(PAGE_SIZE) - - /* - * .exit.text is discarded at runtime, not link time, to deal with - * references from __bug_table - */ - .exit.text : { *(.exit.text) } - .exit.data : { *(.exit.data) } - - . = ALIGN(PAGE_SIZE); - .bss : { - __init_end = .; - __bss_start = .; /* BSS */ - *(.bss.page_aligned) - *(.bss) - *(COMMON) - . = ALIGN(4); - _ebss = .; /* uClinux MTD sucks */ - _end = . ; - } - - /* - * When something in the kernel is NOT compiled as a module, the - * module cleanup code and data are put into these segments. Both - * can then be thrown away, as cleanup code is never called unless - * it's a module. - */ - /DISCARD/ : { - *(.exitcall.exit) - } - - STABS_DEBUG - DWARF_DEBUG -} diff --git a/arch/sh/kernel/vmlinux_32.lds.S b/arch/sh/kernel/vmlinux_32.lds.S new file mode 100644 index 000000000000..d549fac6d3e7 --- /dev/null +++ b/arch/sh/kernel/vmlinux_32.lds.S @@ -0,0 +1,152 @@ +/* + * ld script to make SuperH Linux kernel + * Written by Niibe Yutaka + */ +#include <asm/thread_info.h> +#include <asm/cache.h> +#include <asm-generic/vmlinux.lds.h> + +#ifdef CONFIG_CPU_LITTLE_ENDIAN +OUTPUT_FORMAT("elf32-sh-linux", "elf32-sh-linux", "elf32-sh-linux") +#else +OUTPUT_FORMAT("elf32-shbig-linux", "elf32-shbig-linux", "elf32-shbig-linux") +#endif +OUTPUT_ARCH(sh) +ENTRY(_start) +SECTIONS +{ +#ifdef CONFIG_32BIT + . = CONFIG_PAGE_OFFSET + CONFIG_ZERO_PAGE_OFFSET; +#else + . = CONFIG_PAGE_OFFSET + CONFIG_MEMORY_START + CONFIG_ZERO_PAGE_OFFSET; +#endif + + _text = .; /* Text and read-only data */ + + .empty_zero_page : { + *(.empty_zero_page) + } = 0 + + .text : { + *(.text.head) + TEXT_TEXT + SCHED_TEXT + LOCK_TEXT + KPROBES_TEXT + *(.fixup) + *(.gnu.warning) + } = 0x0009 + + . = ALIGN(16); /* Exception table */ + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + _etext = .; /* End of text section */ + + BUG_TABLE + NOTES + RO_DATA(PAGE_SIZE) + + /* + * Code which must be executed uncached and the associated data + */ + . = ALIGN(PAGE_SIZE); + __uncached_start = .; + .uncached.text : { *(.uncached.text) } + .uncached.data : { *(.uncached.data) } + __uncached_end = .; + + . = ALIGN(THREAD_SIZE); + .data : { /* Data */ + *(.data.init_task) + + . = ALIGN(L1_CACHE_BYTES); + *(.data.cacheline_aligned) + + . = ALIGN(L1_CACHE_BYTES); + *(.data.read_mostly) + + . = ALIGN(PAGE_SIZE); + *(.data.page_aligned) + + __nosave_begin = .; + *(.data.nosave) + . = ALIGN(PAGE_SIZE); + __nosave_end = .; + + DATA_DATA + CONSTRUCTORS + } + + _edata = .; /* End of data section */ + + . = ALIGN(PAGE_SIZE); /* Init code and data */ + __init_begin = .; + _sinittext = .; + .init.text : { *(.init.text) } + _einittext = .; + .init.data : { *(.init.data) } + + . = ALIGN(16); + __setup_start = .; + .init.setup : { *(.init.setup) } + __setup_end = .; + + __initcall_start = .; + .initcall.init : { + INITCALLS + } + __initcall_end = .; + __con_initcall_start = .; + .con_initcall.init : { *(.con_initcall.init) } + __con_initcall_end = .; + + SECURITY_INIT + +#ifdef CONFIG_BLK_DEV_INITRD + . = ALIGN(PAGE_SIZE); + __initramfs_start = .; + .init.ramfs : { *(.init.ramfs) } + __initramfs_end = .; +#endif + + . = ALIGN(4); + __machvec_start = .; + .machvec.init : { *(.machvec.init) } + __machvec_end = .; + + PERCPU(PAGE_SIZE) + + /* + * .exit.text is discarded at runtime, not link time, to deal with + * references from __bug_table + */ + .exit.text : { *(.exit.text) } + .exit.data : { *(.exit.data) } + + . = ALIGN(PAGE_SIZE); + .bss : { + __init_end = .; + __bss_start = .; /* BSS */ + *(.bss.page_aligned) + *(.bss) + *(COMMON) + . = ALIGN(4); + _ebss = .; /* uClinux MTD sucks */ + _end = . ; + } + + /* + * When something in the kernel is NOT compiled as a module, the + * module cleanup code and data are put into these segments. Both + * can then be thrown away, as cleanup code is never called unless + * it's a module. + */ + /DISCARD/ : { + *(.exitcall.exit) + } + + STABS_DEBUG + DWARF_DEBUG +} diff --git a/arch/sh/kernel/vmlinux_64.lds.S b/arch/sh/kernel/vmlinux_64.lds.S new file mode 100644 index 000000000000..2fd0f7401484 --- /dev/null +++ b/arch/sh/kernel/vmlinux_64.lds.S @@ -0,0 +1,164 @@ +/* + * ld script to make SH64 Linux kernel + * + * Copyright (C) 2000, 2001 Paolo Alberelli + * + * benedict.gaster@superh.com: 2nd May 2002 + * Add definition of empty_zero_page to be the first page of kernel image. + * + * benedict.gaster@superh.com: 3rd May 2002 + * Added support for ramdisk, removing statically linked romfs at the + * same time. + * + * lethal@linux-sh.org: 9th May 2003 + * Kill off GLOBAL_NAME() usage and other CDC-isms. + * + * lethal@linux-sh.org: 19th May 2003 + * Remove support for ancient toolchains. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <asm/page.h> +#include <asm/cache.h> +#include <asm/thread_info.h> + +#define LOAD_OFFSET CONFIG_PAGE_OFFSET +#include <asm-generic/vmlinux.lds.h> + +OUTPUT_ARCH(sh:sh5) + +#define C_PHYS(x) AT (ADDR(x) - LOAD_OFFSET) + +ENTRY(__start) +SECTIONS +{ + . = CONFIG_PAGE_OFFSET + CONFIG_MEMORY_START + PAGE_SIZE; + _text = .; /* Text and read-only data */ + + .empty_zero_page : C_PHYS(.empty_zero_page) { + *(.empty_zero_page) + } = 0 + + .text : C_PHYS(.text) { + *(.text.head) + TEXT_TEXT + *(.text64) + *(.text..SHmedia32) + SCHED_TEXT + LOCK_TEXT + KPROBES_TEXT + *(.fixup) + *(.gnu.warning) +#ifdef CONFIG_LITTLE_ENDIAN + } = 0x6ff0fff0 +#else + } = 0xf0fff06f +#endif + + /* We likely want __ex_table to be Cache Line aligned */ + . = ALIGN(L1_CACHE_BYTES); /* Exception table */ + __start___ex_table = .; + __ex_table : C_PHYS(__ex_table) { *(__ex_table) } + __stop___ex_table = .; + + _etext = .; /* End of text section */ + + BUG_TABLE + NOTES + RO_DATA(PAGE_SIZE) + + . = ALIGN(THREAD_SIZE); + .data : C_PHYS(.data) { /* Data */ + *(.data.init_task) + + . = ALIGN(L1_CACHE_BYTES); + *(.data.cacheline_aligned) + + . = ALIGN(L1_CACHE_BYTES); + *(.data.read_mostly) + + . = ALIGN(PAGE_SIZE); + *(.data.page_aligned) + + __nosave_begin = .; + *(.data.nosave) + . = ALIGN(PAGE_SIZE); + __nosave_end = .; + + DATA_DATA + CONSTRUCTORS + } + + _edata = .; /* End of data section */ + + . = ALIGN(PAGE_SIZE); /* Init code and data */ + __init_begin = .; + _sinittext = .; + .init.text : C_PHYS(.init.text) { *(.init.text) } + _einittext = .; + .init.data : C_PHYS(.init.data) { *(.init.data) } + . = ALIGN(L1_CACHE_BYTES); /* Better if Cache Line aligned */ + __setup_start = .; + .init.setup : C_PHYS(.init.setup) { *(.init.setup) } + __setup_end = .; + __initcall_start = .; + .initcall.init : C_PHYS(.initcall.init) { + INITCALLS + } + __initcall_end = .; + __con_initcall_start = .; + .con_initcall.init : C_PHYS(.con_initcall.init) { + *(.con_initcall.init) + } + __con_initcall_end = .; + + SECURITY_INIT + +#ifdef CONFIG_BLK_DEV_INITRD + . = ALIGN(PAGE_SIZE); + __initramfs_start = .; + .init.ramfs : C_PHYS(.init.ramfs) { *(.init.ramfs) } + __initramfs_end = .; +#endif + + . = ALIGN(8); + __machvec_start = .; + .machvec.init : C_PHYS(.machvec.init) { *(.machvec.init) } + __machvec_end = .; + + PERCPU(PAGE_SIZE) + + /* + * .exit.text is discarded at runtime, not link time, to deal with + * references from __bug_table + */ + .exit.text : C_PHYS(.exit.text) { *(.exit.text) } + .exit.data : C_PHYS(.exit.data) { *(.exit.data) } + + . = ALIGN(PAGE_SIZE); + .bss : C_PHYS(.bss) { + __init_end = .; + __bss_start = .; /* BSS */ + *(.bss.page_aligned) + *(.bss) + *(COMMON) + . = ALIGN(4); + _ebss = .; /* uClinux MTD sucks */ + _end = . ; + } + + /* + * When something in the kernel is NOT compiled as a module, the + * module cleanup code and data are put into these segments. Both + * can then be thrown away, as cleanup code is never called unless + * it's a module. + */ + /DISCARD/ : { + *(.exitcall.exit) + } + + STABS_DEBUG + DWARF_DEBUG +} diff --git a/arch/sh/lib/Makefile b/arch/sh/lib/Makefile index 9dc7b6985052..ebb55d1149f5 100644 --- a/arch/sh/lib/Makefile +++ b/arch/sh/lib/Makefile @@ -2,12 +2,13 @@ # Makefile for SuperH-specific library files.. # -lib-y = delay.o memset.o memmove.o memchr.o \ +lib-y = delay.o io.o memset.o memmove.o memchr.o \ checksum.o strlen.o div64.o div64-generic.o memcpy-y := memcpy.o memcpy-$(CONFIG_CPU_SH4) := memcpy-sh4.o -lib-y += $(memcpy-y) +lib-$(CONFIG_MMU) += copy_page.o clear_page.o +lib-y += $(memcpy-y) EXTRA_CFLAGS += -Werror diff --git a/arch/sh/mm/clear_page.S b/arch/sh/lib/clear_page.S index 7a7c81ee3f01..3539123fe517 100644 --- a/arch/sh/mm/clear_page.S +++ b/arch/sh/lib/clear_page.S @@ -9,10 +9,10 @@ #include <asm/page.h> /* - * clear_page_slow + * clear_page * @to: P1 address * - * void clear_page_slow(void *to) + * void clear_page(void *to) */ /* @@ -20,7 +20,7 @@ * r4 --- to * r5 --- to + PAGE_SIZE */ -ENTRY(clear_page_slow) +ENTRY(clear_page) mov r4,r5 mov.l .Llimit,r0 add r0,r5 @@ -50,6 +50,8 @@ ENTRY(clear_page_slow) ! rts nop + + .balign 4 .Llimit: .long (PAGE_SIZE-28) ENTRY(__clear_user) diff --git a/arch/sh/mm/copy_page.S b/arch/sh/lib/copy_page.S index 40685018b952..e002b91c8752 100644 --- a/arch/sh/mm/copy_page.S +++ b/arch/sh/lib/copy_page.S @@ -9,11 +9,11 @@ #include <asm/page.h> /* - * copy_page_slow + * copy_page * @to: P1 address * @from: P1 address * - * void copy_page_slow(void *to, void *from) + * void copy_page(void *to, void *from) */ /* @@ -23,7 +23,7 @@ * r10 --- to * r11 --- from */ -ENTRY(copy_page_slow) +ENTRY(copy_page) mov.l r8,@-r15 mov.l r10,@-r15 mov.l r11,@-r15 @@ -68,8 +68,9 @@ ENTRY(copy_page_slow) rts nop - .align 2 + .balign 4 .Lpsz: .long PAGE_SIZE + /* * __kernel_size_t __copy_user(void *to, const void *from, __kernel_size_t n); * Return the number of bytes NOT copied diff --git a/arch/sh/lib/io.c b/arch/sh/lib/io.c new file mode 100644 index 000000000000..4f54ec43516f --- /dev/null +++ b/arch/sh/lib/io.c @@ -0,0 +1,82 @@ +/* + * arch/sh/lib/io.c - SH32 optimized I/O routines + * + * Copyright (C) 2000 Stuart Menefy + * Copyright (C) 2005 Paul Mundt + * + * Provide real functions which expand to whatever the header file defined. + * Also definitions of machine independent IO functions. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/module.h> +#include <linux/io.h> + +void __raw_readsl(unsigned long addr, void *datap, int len) +{ + u32 *data; + + for (data = datap; (len != 0) && (((u32)data & 0x1f) != 0); len--) + *data++ = ctrl_inl(addr); + + if (likely(len >= (0x20 >> 2))) { + int tmp2, tmp3, tmp4, tmp5, tmp6; + + __asm__ __volatile__( + "1: \n\t" + "mov.l @%7, r0 \n\t" + "mov.l @%7, %2 \n\t" +#ifdef CONFIG_CPU_SH4 + "movca.l r0, @%0 \n\t" +#else + "mov.l r0, @%0 \n\t" +#endif + "mov.l @%7, %3 \n\t" + "mov.l @%7, %4 \n\t" + "mov.l @%7, %5 \n\t" + "mov.l @%7, %6 \n\t" + "mov.l @%7, r7 \n\t" + "mov.l @%7, r0 \n\t" + "mov.l %2, @(0x04,%0) \n\t" + "mov #0x20>>2, %2 \n\t" + "mov.l %3, @(0x08,%0) \n\t" + "sub %2, %1 \n\t" + "mov.l %4, @(0x0c,%0) \n\t" + "cmp/hi %1, %2 ! T if 32 > len \n\t" + "mov.l %5, @(0x10,%0) \n\t" + "mov.l %6, @(0x14,%0) \n\t" + "mov.l r7, @(0x18,%0) \n\t" + "mov.l r0, @(0x1c,%0) \n\t" + "bf.s 1b \n\t" + " add #0x20, %0 \n\t" + : "=&r" (data), "=&r" (len), + "=&r" (tmp2), "=&r" (tmp3), "=&r" (tmp4), + "=&r" (tmp5), "=&r" (tmp6) + : "r"(addr), "0" (data), "1" (len) + : "r0", "r7", "t", "memory"); + } + + for (; len != 0; len--) + *data++ = ctrl_inl(addr); +} +EXPORT_SYMBOL(__raw_readsl); + +void __raw_writesl(unsigned long addr, const void *data, int len) +{ + if (likely(len != 0)) { + int tmp1; + + __asm__ __volatile__ ( + "1: \n\t" + "mov.l @%0+, %1 \n\t" + "dt %3 \n\t" + "bf.s 1b \n\t" + " mov.l %1, @%4 \n\t" + : "=&r" (data), "=&r" (tmp1) + : "0" (data), "r" (len), "r"(addr) + : "t", "memory"); + } +} +EXPORT_SYMBOL(__raw_writesl); diff --git a/arch/sh/lib64/.gitignore b/arch/sh/lib64/.gitignore new file mode 100644 index 000000000000..3508c2cb23c4 --- /dev/null +++ b/arch/sh/lib64/.gitignore @@ -0,0 +1 @@ +syscalltab.h diff --git a/arch/sh/lib64/Makefile b/arch/sh/lib64/Makefile new file mode 100644 index 000000000000..9950966923a0 --- /dev/null +++ b/arch/sh/lib64/Makefile @@ -0,0 +1,15 @@ +# +# Makefile for the SH-5 specific library files.. +# +# Copyright (C) 2000, 2001 Paolo Alberelli +# Copyright (C) 2003 Paul Mundt +# +# This file is subject to the terms and conditions of the GNU General Public +# License. See the file "COPYING" in the main directory of this archive +# for more details. +# + +# Panic should really be compiled as PIC +lib-y := udelay.o c-checksum.o dbg.o panic.o memcpy.o copy_user_memcpy.o \ + copy_page.o clear_page.o + diff --git a/arch/sh/lib64/c-checksum.c b/arch/sh/lib64/c-checksum.c new file mode 100644 index 000000000000..5dfbd8b5e558 --- /dev/null +++ b/arch/sh/lib64/c-checksum.c @@ -0,0 +1,214 @@ +/* + * arch/sh/lib64/c-checksum.c + * + * This file contains network checksum routines that are better done + * in an architecture-specific manner due to speed.. + */ +#include <linux/string.h> +#include <linux/errno.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <asm/byteorder.h> +#include <asm/uaccess.h> + +static inline unsigned short from64to16(unsigned long long x) +{ + /* add up 32-bit words for 33 bits */ + x = (x & 0xffffffff) + (x >> 32); + /* add up 16-bit and 17-bit words for 17+c bits */ + x = (x & 0xffff) + (x >> 16); + /* add up 16-bit and 2-bit for 16+c bit */ + x = (x & 0xffff) + (x >> 16); + /* add up carry.. */ + x = (x & 0xffff) + (x >> 16); + return x; +} + +static inline unsigned short foldto16(unsigned long x) +{ + /* add up 16-bit for 17 bits */ + x = (x & 0xffff) + (x >> 16); + /* add up carry.. */ + x = (x & 0xffff) + (x >> 16); + return x; +} + +static inline unsigned short myfoldto16(unsigned long long x) +{ + /* Fold down to 32-bits so we don't loose in the typedef-less + network stack. */ + /* 64 to 33 */ + x = (x & 0xffffffff) + (x >> 32); + /* 33 to 32 */ + x = (x & 0xffffffff) + (x >> 32); + + /* add up 16-bit for 17 bits */ + x = (x & 0xffff) + (x >> 16); + /* add up carry.. */ + x = (x & 0xffff) + (x >> 16); + return x; +} + +#define odd(x) ((x)&1) +#define U16(x) ntohs(x) + +static unsigned long do_csum(const unsigned char *buff, int len) +{ + int odd, count; + unsigned long result = 0; + + pr_debug("do_csum buff %p, len %d (0x%x)\n", buff, len, len); +#ifdef DEBUG + for (i = 0; i < len; i++) { + if ((i % 26) == 0) + printk("\n"); + printk("%02X ", buff[i]); + } +#endif + + if (len <= 0) + goto out; + + odd = 1 & (unsigned long) buff; + if (odd) { + result = *buff << 8; + len--; + buff++; + } + count = len >> 1; /* nr of 16-bit words.. */ + if (count) { + if (2 & (unsigned long) buff) { + result += *(unsigned short *) buff; + count--; + len -= 2; + buff += 2; + } + count >>= 1; /* nr of 32-bit words.. */ + if (count) { + unsigned long carry = 0; + do { + unsigned long w = *(unsigned long *) buff; + buff += 4; + count--; + result += carry; + result += w; + carry = (w > result); + } while (count); + result += carry; + result = (result & 0xffff) + (result >> 16); + } + if (len & 2) { + result += *(unsigned short *) buff; + buff += 2; + } + } + if (len & 1) + result += *buff; + result = foldto16(result); + if (odd) + result = ((result >> 8) & 0xff) | ((result & 0xff) << 8); + + pr_debug("\nCHECKSUM is 0x%lx\n", result); + + out: + return result; +} + +/* computes the checksum of a memory block at buff, length len, + and adds in "sum" (32-bit) */ +__wsum csum_partial(const void *buff, int len, __wsum sum) +{ + unsigned long long result = do_csum(buff, len); + + /* add in old sum, and carry.. */ + result += (__force u32)sum; + /* 32+c bits -> 32 bits */ + result = (result & 0xffffffff) + (result >> 32); + + pr_debug("csum_partial, buff %p len %d sum 0x%x result=0x%016Lx\n", + buff, len, sum, result); + + return (__force __wsum)result; +} + +/* Copy while checksumming, otherwise like csum_partial. */ +__wsum +csum_partial_copy_nocheck(const void *src, void *dst, int len, __wsum sum) +{ + sum = csum_partial(src, len, sum); + memcpy(dst, src, len); + + return sum; +} + +/* Copy from userspace and compute checksum. If we catch an exception + then zero the rest of the buffer. */ +__wsum +csum_partial_copy_from_user(const void __user *src, void *dst, int len, + __wsum sum, int *err_ptr) +{ + int missing; + + pr_debug + ("csum_partial_copy_from_user src %p, dest %p, len %d, sum %08x, err_ptr %p\n", + src, dst, len, sum, err_ptr); + missing = copy_from_user(dst, src, len); + pr_debug(" access_ok %d\n", __access_ok((unsigned long) src, len)); + pr_debug(" missing %d\n", missing); + if (missing) { + memset(dst + len - missing, 0, missing); + *err_ptr = -EFAULT; + } + + return csum_partial(dst, len, sum); +} + +/* Copy to userspace and compute checksum. */ +__wsum +csum_partial_copy_to_user(const unsigned char *src, unsigned char *dst, int len, + __wsum sum, int *err_ptr) +{ + sum = csum_partial(src, len, sum); + + if (copy_to_user(dst, src, len)) + *err_ptr = -EFAULT; + + return sum; +} + +/* + * This is a version of ip_compute_csum() optimized for IP headers, + * which always checksum on 4 octet boundaries. + */ +__sum16 ip_fast_csum(const void *iph, unsigned int ihl) +{ + pr_debug("ip_fast_csum %p,%d\n", iph, ihl); + + return (__force __sum16)~do_csum(iph, ihl * 4); +} + +__wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr, + unsigned short len, + unsigned short proto, __wsum sum) +{ + unsigned long long result; + + pr_debug("ntohs(0x%x)=0x%x\n", 0xdead, ntohs(0xdead)); + pr_debug("htons(0x%x)=0x%x\n", 0xdead, htons(0xdead)); + + result = (__force u64) saddr + (__force u64) daddr + + (__force u64) sum + ((len + proto) << 8); + + /* Fold down to 32-bits so we don't loose in the typedef-less + network stack. */ + /* 64 to 33 */ + result = (result & 0xffffffff) + (result >> 32); + /* 33 to 32 */ + result = (result & 0xffffffff) + (result >> 32); + + pr_debug("%s saddr %x daddr %x len %x proto %x sum %x result %08Lx\n", + __FUNCTION__, saddr, daddr, len, proto, sum, result); + + return (__wsum)result; +} +EXPORT_SYMBOL(csum_tcpudp_nofold); diff --git a/arch/sh/lib64/clear_page.S b/arch/sh/lib64/clear_page.S new file mode 100644 index 000000000000..007ab48ecc1c --- /dev/null +++ b/arch/sh/lib64/clear_page.S @@ -0,0 +1,54 @@ +/* + Copyright 2003 Richard Curnow, SuperH (UK) Ltd. + + This file is subject to the terms and conditions of the GNU General Public + License. See the file "COPYING" in the main directory of this archive + for more details. + + Tight version of memset for the case of just clearing a page. It turns out + that having the alloco's spaced out slightly due to the increment/branch + pair causes them to contend less for access to the cache. Similarly, + keeping the stores apart from the allocos causes less contention. => Do two + separate loops. Do multiple stores per loop to amortise the + increment/branch cost a little. + + Parameters: + r2 : source effective address (start of page) + + Always clears 4096 bytes. + + Note : alloco guarded by synco to avoid TAKum03020 erratum + +*/ + + .section .text..SHmedia32,"ax" + .little + + .balign 8 + .global clear_page +clear_page: + pta/l 1f, tr1 + pta/l 2f, tr2 + ptabs/l r18, tr0 + + movi 4096, r7 + add r2, r7, r7 + add r2, r63, r6 +1: + alloco r6, 0 + synco ! TAKum03020 + addi r6, 32, r6 + bgt/l r7, r6, tr1 + + add r2, r63, r6 +2: + st.q r6, 0, r63 + st.q r6, 8, r63 + st.q r6, 16, r63 + st.q r6, 24, r63 + addi r6, 32, r6 + bgt/l r7, r6, tr2 + + blink tr0, r63 + + diff --git a/arch/sh/lib64/copy_page.S b/arch/sh/lib64/copy_page.S new file mode 100644 index 000000000000..0ec6fca63b56 --- /dev/null +++ b/arch/sh/lib64/copy_page.S @@ -0,0 +1,89 @@ +/* + Copyright 2003 Richard Curnow, SuperH (UK) Ltd. + + This file is subject to the terms and conditions of the GNU General Public + License. See the file "COPYING" in the main directory of this archive + for more details. + + Tight version of mempy for the case of just copying a page. + Prefetch strategy empirically optimised against RTL simulations + of SH5-101 cut2 eval chip with Cayman board DDR memory. + + Parameters: + r2 : destination effective address (start of page) + r3 : source effective address (start of page) + + Always copies 4096 bytes. + + Points to review. + * Currently the prefetch is 4 lines ahead and the alloco is 2 lines ahead. + It seems like the prefetch needs to be at at least 4 lines ahead to get + the data into the cache in time, and the allocos contend with outstanding + prefetches for the same cache set, so it's better to have the numbers + different. + */ + + .section .text..SHmedia32,"ax" + .little + + .balign 8 + .global copy_page +copy_page: + + /* Copy 4096 bytes worth of data from r3 to r2. + Do prefetches 4 lines ahead. + Do alloco 2 lines ahead */ + + pta 1f, tr1 + pta 2f, tr2 + pta 3f, tr3 + ptabs r18, tr0 + +#if 0 + /* TAKum03020 */ + ld.q r3, 0x00, r63 + ld.q r3, 0x20, r63 + ld.q r3, 0x40, r63 + ld.q r3, 0x60, r63 +#endif + alloco r2, 0x00 + synco ! TAKum03020 + alloco r2, 0x20 + synco ! TAKum03020 + + movi 3968, r6 + add r2, r6, r6 + addi r6, 64, r7 + addi r7, 64, r8 + sub r3, r2, r60 + addi r60, 8, r61 + addi r61, 8, r62 + addi r62, 8, r23 + addi r60, 0x80, r22 + +/* Minimal code size. The extra branches inside the loop don't cost much + because they overlap with the time spent waiting for prefetches to + complete. */ +1: +#if 0 + /* TAKum03020 */ + bge/u r2, r6, tr2 ! skip prefetch for last 4 lines + ldx.q r2, r22, r63 ! prefetch 4 lines hence +#endif +2: + bge/u r2, r7, tr3 ! skip alloco for last 2 lines + alloco r2, 0x40 ! alloc destination line 2 lines ahead + synco ! TAKum03020 +3: + ldx.q r2, r60, r36 + ldx.q r2, r61, r37 + ldx.q r2, r62, r38 + ldx.q r2, r23, r39 + st.q r2, 0, r36 + st.q r2, 8, r37 + st.q r2, 16, r38 + st.q r2, 24, r39 + addi r2, 32, r2 + bgt/l r8, r2, tr1 + + blink tr0, r63 ! return diff --git a/arch/sh/lib64/copy_user_memcpy.S b/arch/sh/lib64/copy_user_memcpy.S new file mode 100644 index 000000000000..2a62816d2ddd --- /dev/null +++ b/arch/sh/lib64/copy_user_memcpy.S @@ -0,0 +1,217 @@ +! +! Fast SH memcpy +! +! by Toshiyasu Morita (tm@netcom.com) +! hacked by J"orn Rernnecke (joern.rennecke@superh.com) ("o for o-umlaut) +! SH5 code Copyright 2002 SuperH Ltd. +! +! Entry: ARG0: destination pointer +! ARG1: source pointer +! ARG2: byte count +! +! Exit: RESULT: destination pointer +! any other registers in the range r0-r7: trashed +! +! Notes: Usually one wants to do small reads and write a longword, but +! unfortunately it is difficult in some cases to concatanate bytes +! into a longword on the SH, so this does a longword read and small +! writes. +! +! This implementation makes two assumptions about how it is called: +! +! 1.: If the byte count is nonzero, the address of the last byte to be +! copied is unsigned greater than the address of the first byte to +! be copied. This could be easily swapped for a signed comparison, +! but the algorithm used needs some comparison. +! +! 2.: When there are two or three bytes in the last word of an 11-or-more +! bytes memory chunk to b copied, the rest of the word can be read +! without side effects. +! This could be easily changed by increasing the minumum size of +! a fast memcpy and the amount subtracted from r7 before L_2l_loop be 2, +! however, this would cost a few extra cyles on average. +! For SHmedia, the assumption is that any quadword can be read in its +! enirety if at least one byte is included in the copy. + +/* Imported into Linux kernel by Richard Curnow. This is used to implement the + __copy_user function in the general case, so it has to be a distinct + function from intra-kernel memcpy to allow for exception fix-ups in the + event that the user pointer is bad somewhere in the copy (e.g. due to + running off the end of the vma). + + Note, this algorithm will be slightly wasteful in the case where the source + and destination pointers are equally aligned, because the stlo/sthi pairs + could then be merged back into single stores. If there are a lot of cache + misses, this is probably offset by the stall lengths on the preloads. + +*/ + +/* NOTE : Prefetches removed and allocos guarded by synco to avoid TAKum03020 + * erratum. The first two prefetches are nop-ed out to avoid upsetting the + * instruction counts used in the jump address calculation. + * */ + + .section .text..SHmedia32,"ax" + .little + .balign 32 + .global copy_user_memcpy + .global copy_user_memcpy_end +copy_user_memcpy: + +#define LDUAQ(P,O,D0,D1) ldlo.q P,O,D0; ldhi.q P,O+7,D1 +#define STUAQ(P,O,D0,D1) stlo.q P,O,D0; sthi.q P,O+7,D1 +#define LDUAL(P,O,D0,D1) ldlo.l P,O,D0; ldhi.l P,O+3,D1 +#define STUAL(P,O,D0,D1) stlo.l P,O,D0; sthi.l P,O+3,D1 + + nop ! ld.b r3,0,r63 ! TAKum03020 + pta/l Large,tr0 + movi 25,r0 + bgeu/u r4,r0,tr0 + nsb r4,r0 + shlli r0,5,r0 + movi (L1-L0+63*32 + 1) & 0xffff,r1 + sub r1, r0, r0 +L0: ptrel r0,tr0 + add r2,r4,r5 + ptabs r18,tr1 + add r3,r4,r6 + blink tr0,r63 + +/* Rearranged to make cut2 safe */ + .balign 8 +L4_7: /* 4..7 byte memcpy cntd. */ + stlo.l r2, 0, r0 + or r6, r7, r6 + sthi.l r5, -1, r6 + stlo.l r5, -4, r6 + blink tr1,r63 + + .balign 8 +L1: /* 0 byte memcpy */ + nop + blink tr1,r63 + nop + nop + nop + nop + +L2_3: /* 2 or 3 byte memcpy cntd. */ + st.b r5,-1,r6 + blink tr1,r63 + + /* 1 byte memcpy */ + ld.b r3,0,r0 + st.b r2,0,r0 + blink tr1,r63 + +L8_15: /* 8..15 byte memcpy cntd. */ + stlo.q r2, 0, r0 + or r6, r7, r6 + sthi.q r5, -1, r6 + stlo.q r5, -8, r6 + blink tr1,r63 + + /* 2 or 3 byte memcpy */ + ld.b r3,0,r0 + nop ! ld.b r2,0,r63 ! TAKum03020 + ld.b r3,1,r1 + st.b r2,0,r0 + pta/l L2_3,tr0 + ld.b r6,-1,r6 + st.b r2,1,r1 + blink tr0, r63 + + /* 4 .. 7 byte memcpy */ + LDUAL (r3, 0, r0, r1) + pta L4_7, tr0 + ldlo.l r6, -4, r7 + or r0, r1, r0 + sthi.l r2, 3, r0 + ldhi.l r6, -1, r6 + blink tr0, r63 + + /* 8 .. 15 byte memcpy */ + LDUAQ (r3, 0, r0, r1) + pta L8_15, tr0 + ldlo.q r6, -8, r7 + or r0, r1, r0 + sthi.q r2, 7, r0 + ldhi.q r6, -1, r6 + blink tr0, r63 + + /* 16 .. 24 byte memcpy */ + LDUAQ (r3, 0, r0, r1) + LDUAQ (r3, 8, r8, r9) + or r0, r1, r0 + sthi.q r2, 7, r0 + or r8, r9, r8 + sthi.q r2, 15, r8 + ldlo.q r6, -8, r7 + ldhi.q r6, -1, r6 + stlo.q r2, 8, r8 + stlo.q r2, 0, r0 + or r6, r7, r6 + sthi.q r5, -1, r6 + stlo.q r5, -8, r6 + blink tr1,r63 + +Large: + ! ld.b r2, 0, r63 ! TAKum03020 + pta/l Loop_ua, tr1 + ori r3, -8, r7 + sub r2, r7, r22 + sub r3, r2, r6 + add r2, r4, r5 + ldlo.q r3, 0, r0 + addi r5, -16, r5 + movi 64+8, r27 ! could subtract r7 from that. + stlo.q r2, 0, r0 + sthi.q r2, 7, r0 + ldx.q r22, r6, r0 + bgtu/l r27, r4, tr1 + + addi r5, -48, r27 + pta/l Loop_line, tr0 + addi r6, 64, r36 + addi r6, -24, r19 + addi r6, -16, r20 + addi r6, -8, r21 + +Loop_line: + ! ldx.q r22, r36, r63 ! TAKum03020 + alloco r22, 32 + synco + addi r22, 32, r22 + ldx.q r22, r19, r23 + sthi.q r22, -25, r0 + ldx.q r22, r20, r24 + ldx.q r22, r21, r25 + stlo.q r22, -32, r0 + ldx.q r22, r6, r0 + sthi.q r22, -17, r23 + sthi.q r22, -9, r24 + sthi.q r22, -1, r25 + stlo.q r22, -24, r23 + stlo.q r22, -16, r24 + stlo.q r22, -8, r25 + bgeu r27, r22, tr0 + +Loop_ua: + addi r22, 8, r22 + sthi.q r22, -1, r0 + stlo.q r22, -8, r0 + ldx.q r22, r6, r0 + bgtu/l r5, r22, tr1 + + add r3, r4, r7 + ldlo.q r7, -8, r1 + sthi.q r22, 7, r0 + ldhi.q r7, -1, r7 + ptabs r18,tr1 + stlo.q r22, 0, r0 + or r1, r7, r1 + sthi.q r5, 15, r1 + stlo.q r5, 8, r1 + blink tr1, r63 +copy_user_memcpy_end: + nop diff --git a/arch/sh/lib64/dbg.c b/arch/sh/lib64/dbg.c new file mode 100644 index 000000000000..75825ef6e084 --- /dev/null +++ b/arch/sh/lib64/dbg.c @@ -0,0 +1,430 @@ +/*-------------------------------------------------------------------------- +-- +-- Identity : Linux50 Debug Funcions +-- +-- File : arch/sh/lib64/dbg.c +-- +-- Copyright 2000, 2001 STMicroelectronics Limited. +-- Copyright 2004 Richard Curnow (evt_debug etc) +-- +--------------------------------------------------------------------------*/ +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/mm.h> +#include <linux/fs.h> +#include <asm/mmu_context.h> + +typedef u64 regType_t; + +static regType_t getConfigReg(u64 id) +{ + register u64 reg __asm__("r2"); + asm volatile ("getcfg %1, 0, %0":"=r" (reg):"r"(id)); + return (reg); +} + +/* ======================================================================= */ + +static char *szTab[] = { "4k", "64k", "1M", "512M" }; +static char *protTab[] = { "----", + "---R", + "--X-", + "--XR", + "-W--", + "-W-R", + "-WX-", + "-WXR", + "U---", + "U--R", + "U-X-", + "U-XR", + "UW--", + "UW-R", + "UWX-", + "UWXR" +}; +#define ITLB_BASE 0x00000000 +#define DTLB_BASE 0x00800000 +#define MAX_TLBs 64 +/* PTE High */ +#define GET_VALID(pte) ((pte) & 0x1) +#define GET_SHARED(pte) ((pte) & 0x2) +#define GET_ASID(pte) ((pte >> 2) & 0x0ff) +#define GET_EPN(pte) ((pte) & 0xfffff000) + +/* PTE Low */ +#define GET_CBEHAVIOR(pte) ((pte) & 0x3) +#define GET_PAGE_SIZE(pte) szTab[((pte >> 3) & 0x3)] +#define GET_PROTECTION(pte) protTab[((pte >> 6) & 0xf)] +#define GET_PPN(pte) ((pte) & 0xfffff000) + +#define PAGE_1K_MASK 0x00000000 +#define PAGE_4K_MASK 0x00000010 +#define PAGE_64K_MASK 0x00000080 +#define MMU_PAGESIZE_MASK (PAGE_64K_MASK | PAGE_4K_MASK) +#define PAGE_1MB_MASK MMU_PAGESIZE_MASK +#define PAGE_1K (1024) +#define PAGE_4K (1024 * 4) +#define PAGE_64K (1024 * 64) +#define PAGE_1MB (1024 * 1024) + +#define HOW_TO_READ_TLB_CONTENT \ + "[ ID] PPN EPN ASID Share CB P.Size PROT.\n" + +void print_single_tlb(unsigned long tlb, int single_print) +{ + regType_t pteH; + regType_t pteL; + unsigned int valid, shared, asid, epn, cb, ppn; + char *pSize; + char *pProt; + + /* + ** in case of single print <single_print> is true, this implies: + ** 1) print the TLB in any case also if NOT VALID + ** 2) print out the header + */ + + pteH = getConfigReg(tlb); + valid = GET_VALID(pteH); + if (single_print) + printk(HOW_TO_READ_TLB_CONTENT); + else if (!valid) + return; + + pteL = getConfigReg(tlb + 1); + + shared = GET_SHARED(pteH); + asid = GET_ASID(pteH); + epn = GET_EPN(pteH); + cb = GET_CBEHAVIOR(pteL); + pSize = GET_PAGE_SIZE(pteL); + pProt = GET_PROTECTION(pteL); + ppn = GET_PPN(pteL); + printk("[%c%2ld] 0x%08x 0x%08x %03d %02x %02x %4s %s\n", + ((valid) ? ' ' : 'u'), ((tlb & 0x0ffff) / TLB_STEP), + ppn, epn, asid, shared, cb, pSize, pProt); +} + +void print_dtlb(void) +{ + int count; + unsigned long tlb; + + printk(" ================= SH-5 D-TLBs Status ===================\n"); + printk(HOW_TO_READ_TLB_CONTENT); + tlb = DTLB_BASE; + for (count = 0; count < MAX_TLBs; count++, tlb += TLB_STEP) + print_single_tlb(tlb, 0); + printk + (" =============================================================\n"); +} + +void print_itlb(void) +{ + int count; + unsigned long tlb; + + printk(" ================= SH-5 I-TLBs Status ===================\n"); + printk(HOW_TO_READ_TLB_CONTENT); + tlb = ITLB_BASE; + for (count = 0; count < MAX_TLBs; count++, tlb += TLB_STEP) + print_single_tlb(tlb, 0); + printk + (" =============================================================\n"); +} + +/* ======================================================================= */ + +#ifdef CONFIG_POOR_MANS_STRACE + +#include "syscalltab.h" + +struct ring_node { + int evt; + int ret_addr; + int event; + int tra; + int pid; + unsigned long sp; + unsigned long pc; +}; + +static struct ring_node event_ring[16]; +static int event_ptr = 0; + +struct stored_syscall_data { + int pid; + int syscall_number; +}; + +#define N_STORED_SYSCALLS 16 + +static struct stored_syscall_data stored_syscalls[N_STORED_SYSCALLS]; +static int syscall_next=0; +static int syscall_next_print=0; + +void evt_debug(int evt, int ret_addr, int event, int tra, struct pt_regs *regs) +{ + int syscallno = tra & 0xff; + unsigned long sp; + unsigned long stack_bottom; + int pid; + struct ring_node *rr; + + pid = current->pid; + stack_bottom = (unsigned long) task_stack_page(current); + asm volatile("ori r15, 0, %0" : "=r" (sp)); + rr = event_ring + event_ptr; + rr->evt = evt; + rr->ret_addr = ret_addr; + rr->event = event; + rr->tra = tra; + rr->pid = pid; + rr->sp = sp; + rr->pc = regs->pc; + + if (sp < stack_bottom + 3092) { + printk("evt_debug : stack underflow report\n"); + int i, j; + for (j=0, i = event_ptr; j<16; j++) { + rr = event_ring + i; + printk("evt=%08x event=%08x tra=%08x pid=%5d sp=%08lx pc=%08lx\n", + rr->evt, rr->event, rr->tra, rr->pid, rr->sp, rr->pc); + i--; + i &= 15; + } + panic("STACK UNDERFLOW\n"); + } + + event_ptr = (event_ptr + 1) & 15; + + if ((event == 2) && (evt == 0x160)) { + if (syscallno < NUM_SYSCALL_INFO_ENTRIES) { + /* Store the syscall information to print later. We + * can't print this now - currently we're running with + * SR.BL=1, so we can't take a tlbmiss (which could occur + * in the console drivers under printk). + * + * Just overwrite old entries on ring overflow - this + * is only for last-hope debugging. */ + stored_syscalls[syscall_next].pid = current->pid; + stored_syscalls[syscall_next].syscall_number = syscallno; + syscall_next++; + syscall_next &= (N_STORED_SYSCALLS - 1); + } + } +} + +static void drain_syscalls(void) { + while (syscall_next_print != syscall_next) { + printk("Task %d: %s()\n", + stored_syscalls[syscall_next_print].pid, + syscall_info_table[stored_syscalls[syscall_next_print].syscall_number].name); + syscall_next_print++; + syscall_next_print &= (N_STORED_SYSCALLS - 1); + } +} + +void evt_debug2(unsigned int ret) +{ + drain_syscalls(); + printk("Task %d: syscall returns %08x\n", current->pid, ret); +} + +void evt_debug_ret_from_irq(struct pt_regs *regs) +{ + int pid; + struct ring_node *rr; + + pid = current->pid; + rr = event_ring + event_ptr; + rr->evt = 0xffff; + rr->ret_addr = 0; + rr->event = 0; + rr->tra = 0; + rr->pid = pid; + rr->pc = regs->pc; + event_ptr = (event_ptr + 1) & 15; +} + +void evt_debug_ret_from_exc(struct pt_regs *regs) +{ + int pid; + struct ring_node *rr; + + pid = current->pid; + rr = event_ring + event_ptr; + rr->evt = 0xfffe; + rr->ret_addr = 0; + rr->event = 0; + rr->tra = 0; + rr->pid = pid; + rr->pc = regs->pc; + event_ptr = (event_ptr + 1) & 15; +} + +#endif /* CONFIG_POOR_MANS_STRACE */ + +/* ======================================================================= */ + +void show_excp_regs(char *from, int trapnr, int signr, struct pt_regs *regs) +{ + + unsigned long long ah, al, bh, bl, ch, cl; + + printk("\n"); + printk("EXCEPTION - %s: task %d; Linux trap # %d; signal = %d\n", + ((from) ? from : "???"), current->pid, trapnr, signr); + + asm volatile ("getcon " __EXPEVT ", %0":"=r"(ah)); + asm volatile ("getcon " __EXPEVT ", %0":"=r"(al)); + ah = (ah) >> 32; + al = (al) & 0xffffffff; + asm volatile ("getcon " __KCR1 ", %0":"=r"(bh)); + asm volatile ("getcon " __KCR1 ", %0":"=r"(bl)); + bh = (bh) >> 32; + bl = (bl) & 0xffffffff; + asm volatile ("getcon " __INTEVT ", %0":"=r"(ch)); + asm volatile ("getcon " __INTEVT ", %0":"=r"(cl)); + ch = (ch) >> 32; + cl = (cl) & 0xffffffff; + printk("EXPE: %08Lx%08Lx KCR1: %08Lx%08Lx INTE: %08Lx%08Lx\n", + ah, al, bh, bl, ch, cl); + + asm volatile ("getcon " __PEXPEVT ", %0":"=r"(ah)); + asm volatile ("getcon " __PEXPEVT ", %0":"=r"(al)); + ah = (ah) >> 32; + al = (al) & 0xffffffff; + asm volatile ("getcon " __PSPC ", %0":"=r"(bh)); + asm volatile ("getcon " __PSPC ", %0":"=r"(bl)); + bh = (bh) >> 32; + bl = (bl) & 0xffffffff; + asm volatile ("getcon " __PSSR ", %0":"=r"(ch)); + asm volatile ("getcon " __PSSR ", %0":"=r"(cl)); + ch = (ch) >> 32; + cl = (cl) & 0xffffffff; + printk("PEXP: %08Lx%08Lx PSPC: %08Lx%08Lx PSSR: %08Lx%08Lx\n", + ah, al, bh, bl, ch, cl); + + ah = (regs->pc) >> 32; + al = (regs->pc) & 0xffffffff; + bh = (regs->regs[18]) >> 32; + bl = (regs->regs[18]) & 0xffffffff; + ch = (regs->regs[15]) >> 32; + cl = (regs->regs[15]) & 0xffffffff; + printk("PC : %08Lx%08Lx LINK: %08Lx%08Lx SP : %08Lx%08Lx\n", + ah, al, bh, bl, ch, cl); + + ah = (regs->sr) >> 32; + al = (regs->sr) & 0xffffffff; + asm volatile ("getcon " __TEA ", %0":"=r"(bh)); + asm volatile ("getcon " __TEA ", %0":"=r"(bl)); + bh = (bh) >> 32; + bl = (bl) & 0xffffffff; + asm volatile ("getcon " __KCR0 ", %0":"=r"(ch)); + asm volatile ("getcon " __KCR0 ", %0":"=r"(cl)); + ch = (ch) >> 32; + cl = (cl) & 0xffffffff; + printk("SR : %08Lx%08Lx TEA : %08Lx%08Lx KCR0: %08Lx%08Lx\n", + ah, al, bh, bl, ch, cl); + + ah = (regs->regs[0]) >> 32; + al = (regs->regs[0]) & 0xffffffff; + bh = (regs->regs[1]) >> 32; + bl = (regs->regs[1]) & 0xffffffff; + ch = (regs->regs[2]) >> 32; + cl = (regs->regs[2]) & 0xffffffff; + printk("R0 : %08Lx%08Lx R1 : %08Lx%08Lx R2 : %08Lx%08Lx\n", + ah, al, bh, bl, ch, cl); + + ah = (regs->regs[3]) >> 32; + al = (regs->regs[3]) & 0xffffffff; + bh = (regs->regs[4]) >> 32; + bl = (regs->regs[4]) & 0xffffffff; + ch = (regs->regs[5]) >> 32; + cl = (regs->regs[5]) & 0xffffffff; + printk("R3 : %08Lx%08Lx R4 : %08Lx%08Lx R5 : %08Lx%08Lx\n", + ah, al, bh, bl, ch, cl); + + ah = (regs->regs[6]) >> 32; + al = (regs->regs[6]) & 0xffffffff; + bh = (regs->regs[7]) >> 32; + bl = (regs->regs[7]) & 0xffffffff; + ch = (regs->regs[8]) >> 32; + cl = (regs->regs[8]) & 0xffffffff; + printk("R6 : %08Lx%08Lx R7 : %08Lx%08Lx R8 : %08Lx%08Lx\n", + ah, al, bh, bl, ch, cl); + + ah = (regs->regs[9]) >> 32; + al = (regs->regs[9]) & 0xffffffff; + bh = (regs->regs[10]) >> 32; + bl = (regs->regs[10]) & 0xffffffff; + ch = (regs->regs[11]) >> 32; + cl = (regs->regs[11]) & 0xffffffff; + printk("R9 : %08Lx%08Lx R10 : %08Lx%08Lx R11 : %08Lx%08Lx\n", + ah, al, bh, bl, ch, cl); + printk("....\n"); + + ah = (regs->tregs[0]) >> 32; + al = (regs->tregs[0]) & 0xffffffff; + bh = (regs->tregs[1]) >> 32; + bl = (regs->tregs[1]) & 0xffffffff; + ch = (regs->tregs[2]) >> 32; + cl = (regs->tregs[2]) & 0xffffffff; + printk("T0 : %08Lx%08Lx T1 : %08Lx%08Lx T2 : %08Lx%08Lx\n", + ah, al, bh, bl, ch, cl); + printk("....\n"); + + print_dtlb(); + print_itlb(); +} + +/* ======================================================================= */ + +/* +** Depending on <base> scan the MMU, Data or Instruction side +** looking for a valid mapping matching Eaddr & asid. +** Return -1 if not found or the TLB id entry otherwise. +** Note: it works only for 4k pages! +*/ +static unsigned long +lookup_mmu_side(unsigned long base, unsigned long Eaddr, unsigned long asid) +{ + regType_t pteH; + unsigned long epn; + int count; + + epn = Eaddr & 0xfffff000; + + for (count = 0; count < MAX_TLBs; count++, base += TLB_STEP) { + pteH = getConfigReg(base); + if (GET_VALID(pteH)) + if ((unsigned long) GET_EPN(pteH) == epn) + if ((unsigned long) GET_ASID(pteH) == asid) + break; + } + return ((unsigned long) ((count < MAX_TLBs) ? base : -1)); +} + +unsigned long lookup_dtlb(unsigned long Eaddr) +{ + unsigned long asid = get_asid(); + return (lookup_mmu_side((u64) DTLB_BASE, Eaddr, asid)); +} + +unsigned long lookup_itlb(unsigned long Eaddr) +{ + unsigned long asid = get_asid(); + return (lookup_mmu_side((u64) ITLB_BASE, Eaddr, asid)); +} + +void print_page(struct page *page) +{ + printk(" page[%p] -> index 0x%lx, count 0x%x, flags 0x%lx\n", + page, page->index, page_count(page), page->flags); + printk(" address_space = %p, pages =%ld\n", page->mapping, + page->mapping->nrpages); + +} diff --git a/arch/sh/lib64/memcpy.c b/arch/sh/lib64/memcpy.c new file mode 100644 index 000000000000..fba436a92bfa --- /dev/null +++ b/arch/sh/lib64/memcpy.c @@ -0,0 +1,81 @@ +/* + * Copyright (C) 2002 Mark Debbage (Mark.Debbage@superh.com) + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + * + */ + +#include <linux/types.h> +#include <asm/string.h> + +// This is a simplistic optimization of memcpy to increase the +// granularity of access beyond one byte using aligned +// loads and stores. This is not an optimal implementation +// for SH-5 (especially with regard to prefetching and the cache), +// and a better version should be provided later ... + +void *memcpy(void *dest, const void *src, size_t count) +{ + char *d = (char *) dest, *s = (char *) src; + + if (count >= 32) { + int i = 8 - (((unsigned long) d) & 0x7); + + if (i != 8) + while (i-- && count--) { + *d++ = *s++; + } + + if (((((unsigned long) d) & 0x7) == 0) && + ((((unsigned long) s) & 0x7) == 0)) { + while (count >= 32) { + unsigned long long t1, t2, t3, t4; + t1 = *(unsigned long long *) (s); + t2 = *(unsigned long long *) (s + 8); + t3 = *(unsigned long long *) (s + 16); + t4 = *(unsigned long long *) (s + 24); + *(unsigned long long *) (d) = t1; + *(unsigned long long *) (d + 8) = t2; + *(unsigned long long *) (d + 16) = t3; + *(unsigned long long *) (d + 24) = t4; + d += 32; + s += 32; + count -= 32; + } + while (count >= 8) { + *(unsigned long long *) d = + *(unsigned long long *) s; + d += 8; + s += 8; + count -= 8; + } + } + + if (((((unsigned long) d) & 0x3) == 0) && + ((((unsigned long) s) & 0x3) == 0)) { + while (count >= 4) { + *(unsigned long *) d = *(unsigned long *) s; + d += 4; + s += 4; + count -= 4; + } + } + + if (((((unsigned long) d) & 0x1) == 0) && + ((((unsigned long) s) & 0x1) == 0)) { + while (count >= 2) { + *(unsigned short *) d = *(unsigned short *) s; + d += 2; + s += 2; + count -= 2; + } + } + } + + while (count--) { + *d++ = *s++; + } + + return d; +} diff --git a/arch/sh/lib64/panic.c b/arch/sh/lib64/panic.c new file mode 100644 index 000000000000..ff559e2a96f7 --- /dev/null +++ b/arch/sh/lib64/panic.c @@ -0,0 +1,58 @@ +/* + * Copyright (C) 2003 Richard Curnow, SuperH UK Limited + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include <linux/kernel.h> +#include <asm/io.h> +#include <asm/cpu/registers.h> + +/* THIS IS A PHYSICAL ADDRESS */ +#define HDSP2534_ADDR (0x04002100) + +#ifdef CONFIG_SH_CAYMAN + +static void poor_mans_delay(void) +{ + int i; + for (i = 0; i < 2500000; i++) { + } /* poor man's delay */ +} + +static void show_value(unsigned long x) +{ + int i; + unsigned nibble; + for (i = 0; i < 8; i++) { + nibble = ((x >> (i * 4)) & 0xf); + + ctrl_outb(nibble + ((nibble > 9) ? 55 : 48), + HDSP2534_ADDR + 0xe0 + ((7 - i) << 2)); + } +} + +#endif + +void +panic_handler(unsigned long panicPC, unsigned long panicSSR, + unsigned long panicEXPEVT) +{ +#ifdef CONFIG_SH_CAYMAN + while (1) { + /* This piece of code displays the PC on the LED display */ + show_value(panicPC); + poor_mans_delay(); + show_value(panicSSR); + poor_mans_delay(); + show_value(panicEXPEVT); + poor_mans_delay(); + } +#endif + + /* Never return from the panic handler */ + for (;;) ; + +} diff --git a/arch/sh/lib64/udelay.c b/arch/sh/lib64/udelay.c new file mode 100644 index 000000000000..23c7d17fb9f7 --- /dev/null +++ b/arch/sh/lib64/udelay.c @@ -0,0 +1,56 @@ +/* + * arch/sh/lib64/udelay.c + * + * Delay routines, using a pre-computed "loops_per_jiffy" value. + * + * Copyright (C) 2000, 2001 Paolo Alberelli + * Copyright (C) 2003, 2004 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/sched.h> +#include <asm/param.h> + +/* + * Use only for very small delays (< 1 msec). + * + * The active part of our cycle counter is only 32-bits wide, and + * we're treating the difference between two marks as signed. On + * a 1GHz box, that's about 2 seconds. + */ + +void __delay(int loops) +{ + long long dummy; + __asm__ __volatile__("gettr tr0, %1\n\t" + "pta $+4, tr0\n\t" + "addi %0, -1, %0\n\t" + "bne %0, r63, tr0\n\t" + "ptabs %1, tr0\n\t":"=r"(loops), + "=r"(dummy) + :"0"(loops)); +} + +void __udelay(unsigned long long usecs, unsigned long lpj) +{ + usecs *= (((unsigned long long) HZ << 32) / 1000000) * lpj; + __delay((long long) usecs >> 32); +} + +void __ndelay(unsigned long long nsecs, unsigned long lpj) +{ + nsecs *= (((unsigned long long) HZ << 32) / 1000000000) * lpj; + __delay((long long) nsecs >> 32); +} + +void udelay(unsigned long usecs) +{ + __udelay(usecs, cpu_data[raw_smp_processor_id()].loops_per_jiffy); +} + +void ndelay(unsigned long nsecs) +{ + __ndelay(nsecs, cpu_data[raw_smp_processor_id()].loops_per_jiffy); +} diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig index 1265f204f7d1..f549b8cd2501 100644 --- a/arch/sh/mm/Kconfig +++ b/arch/sh/mm/Kconfig @@ -1,193 +1,3 @@ -# -# Processor families -# -config CPU_SH2 - bool - -config CPU_SH2A - bool - select CPU_SH2 - -config CPU_SH3 - bool - select CPU_HAS_INTEVT - select CPU_HAS_SR_RB - -config CPU_SH4 - bool - select CPU_HAS_INTEVT - select CPU_HAS_SR_RB - select CPU_HAS_PTEA if !CPU_SH4A || CPU_SHX2 - select CPU_HAS_FPU if !CPU_SH4AL_DSP - -config CPU_SH4A - bool - select CPU_SH4 - -config CPU_SH4AL_DSP - bool - select CPU_SH4A - select CPU_HAS_DSP - -config CPU_SHX2 - bool - -config CPU_SHX3 - bool - -choice - prompt "Processor sub-type selection" - -# -# Processor subtypes -# - -# SH-2 Processor Support - -config CPU_SUBTYPE_SH7619 - bool "Support SH7619 processor" - select CPU_SH2 - -# SH-2A Processor Support - -config CPU_SUBTYPE_SH7206 - bool "Support SH7206 processor" - select CPU_SH2A - -# SH-3 Processor Support - -config CPU_SUBTYPE_SH7705 - bool "Support SH7705 processor" - select CPU_SH3 - -config CPU_SUBTYPE_SH7706 - bool "Support SH7706 processor" - select CPU_SH3 - help - Select SH7706 if you have a 133 Mhz SH-3 HD6417706 CPU. - -config CPU_SUBTYPE_SH7707 - bool "Support SH7707 processor" - select CPU_SH3 - help - Select SH7707 if you have a 60 Mhz SH-3 HD6417707 CPU. - -config CPU_SUBTYPE_SH7708 - bool "Support SH7708 processor" - select CPU_SH3 - help - Select SH7708 if you have a 60 Mhz SH-3 HD6417708S or - if you have a 100 Mhz SH-3 HD6417708R CPU. - -config CPU_SUBTYPE_SH7709 - bool "Support SH7709 processor" - select CPU_SH3 - help - Select SH7709 if you have a 80 Mhz SH-3 HD6417709 CPU. - -config CPU_SUBTYPE_SH7710 - bool "Support SH7710 processor" - select CPU_SH3 - select CPU_HAS_DSP - help - Select SH7710 if you have a SH3-DSP SH7710 CPU. - -config CPU_SUBTYPE_SH7712 - bool "Support SH7712 processor" - select CPU_SH3 - select CPU_HAS_DSP - help - Select SH7712 if you have a SH3-DSP SH7712 CPU. - -config CPU_SUBTYPE_SH7720 - bool "Support SH7720 processor" - select CPU_SH3 - select CPU_HAS_DSP - help - Select SH7720 if you have a SH3-DSP SH7720 CPU. - -# SH-4 Processor Support - -config CPU_SUBTYPE_SH7750 - bool "Support SH7750 processor" - select CPU_SH4 - help - Select SH7750 if you have a 200 Mhz SH-4 HD6417750 CPU. - -config CPU_SUBTYPE_SH7091 - bool "Support SH7091 processor" - select CPU_SH4 - help - Select SH7091 if you have an SH-4 based Sega device (such as - the Dreamcast, Naomi, and Naomi 2). - -config CPU_SUBTYPE_SH7750R - bool "Support SH7750R processor" - select CPU_SH4 - -config CPU_SUBTYPE_SH7750S - bool "Support SH7750S processor" - select CPU_SH4 - -config CPU_SUBTYPE_SH7751 - bool "Support SH7751 processor" - select CPU_SH4 - help - Select SH7751 if you have a 166 Mhz SH-4 HD6417751 CPU, - or if you have a HD6417751R CPU. - -config CPU_SUBTYPE_SH7751R - bool "Support SH7751R processor" - select CPU_SH4 - -config CPU_SUBTYPE_SH7760 - bool "Support SH7760 processor" - select CPU_SH4 - -config CPU_SUBTYPE_SH4_202 - bool "Support SH4-202 processor" - select CPU_SH4 - -# SH-4A Processor Support - -config CPU_SUBTYPE_SH7770 - bool "Support SH7770 processor" - select CPU_SH4A - -config CPU_SUBTYPE_SH7780 - bool "Support SH7780 processor" - select CPU_SH4A - -config CPU_SUBTYPE_SH7785 - bool "Support SH7785 processor" - select CPU_SH4A - select CPU_SHX2 - select ARCH_SPARSEMEM_ENABLE - select SYS_SUPPORTS_NUMA - -config CPU_SUBTYPE_SHX3 - bool "Support SH-X3 processor" - select CPU_SH4A - select CPU_SHX3 - select ARCH_SPARSEMEM_ENABLE - select SYS_SUPPORTS_NUMA - select SYS_SUPPORTS_SMP - -# SH4AL-DSP Processor Support - -config CPU_SUBTYPE_SH7343 - bool "Support SH7343 processor" - select CPU_SH4AL_DSP - -config CPU_SUBTYPE_SH7722 - bool "Support SH7722 processor" - select CPU_SH4AL_DSP - select CPU_SHX2 - select ARCH_SPARSEMEM_ENABLE - select SYS_SUPPORTS_NUMA - -endchoice - menu "Memory management options" config QUICKLIST @@ -207,7 +17,8 @@ config MMU config PAGE_OFFSET hex - default "0x80000000" if MMU + default "0x80000000" if MMU && SUPERH32 + default "0x20000000" if MMU && SUPERH64 default "0x00000000" config MEMORY_START @@ -228,17 +39,28 @@ config MEMORY_START config MEMORY_SIZE hex "Physical memory size" - default "0x00400000" + default "0x04000000" help This sets the default memory size assumed by your SH kernel. It can be overridden as normal by the 'mem=' argument on the kernel command line. If unsure, consult your board specifications or just leave it - as 0x00400000 which was the default value before this became + as 0x04000000 which was the default value before this became configurable. +# Physical addressing modes + +config 29BIT + def_bool !32BIT + depends on SUPERH32 + config 32BIT + bool + default y if CPU_SH5 + +config PMB bool "Support 32-bit physical addressing through PMB" depends on MMU && (CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785) + select 32BIT default y help If you say Y here, physical addressing will be extended to @@ -256,7 +78,7 @@ config X2TLB config VSYSCALL bool "Support vsyscall page" - depends on MMU + depends on MMU && (CPU_SH3 || CPU_SH4) default y help This will enable support for the kernel mapping a vDSO page @@ -335,7 +157,7 @@ config PAGE_SIZE_8KB config PAGE_SIZE_64KB bool "64kB" - depends on CPU_SH4 + depends on CPU_SH4 || CPU_SH5 help This enables support for 64kB pages, possible on all SH-4 CPUs and later. @@ -344,7 +166,7 @@ endchoice choice prompt "HugeTLB page size" - depends on HUGETLB_PAGE && CPU_SH4 && MMU + depends on HUGETLB_PAGE && (CPU_SH4 || CPU_SH5) && MMU default HUGETLB_PAGE_SIZE_64K config HUGETLB_PAGE_SIZE_64K @@ -365,6 +187,10 @@ config HUGETLB_PAGE_SIZE_64MB bool "64MB" depends on X2TLB +config HUGETLB_PAGE_SIZE_512MB + bool "512MB" + depends on CPU_SH5 + endchoice source "mm/Kconfig" @@ -392,12 +218,12 @@ config SH_DIRECT_MAPPED choice prompt "Cache mode" - default CACHE_WRITEBACK if CPU_SH2A || CPU_SH3 || CPU_SH4 + default CACHE_WRITEBACK if CPU_SH2A || CPU_SH3 || CPU_SH4 || CPU_SH5 default CACHE_WRITETHROUGH if (CPU_SH2 && !CPU_SH2A) config CACHE_WRITEBACK bool "Write-back" - depends on CPU_SH2A || CPU_SH3 || CPU_SH4 + depends on CPU_SH2A || CPU_SH3 || CPU_SH4 || CPU_SH5 config CACHE_WRITETHROUGH bool "Write-through" diff --git a/arch/sh/mm/Makefile b/arch/sh/mm/Makefile index aa44607f072d..9f4bc3d90b1e 100644 --- a/arch/sh/mm/Makefile +++ b/arch/sh/mm/Makefile @@ -1,37 +1,5 @@ -# -# Makefile for the Linux SuperH-specific parts of the memory manager. -# - -obj-y := init.o extable.o consistent.o - -ifndef CONFIG_CACHE_OFF -obj-$(CONFIG_CPU_SH2) += cache-sh2.o -obj-$(CONFIG_CPU_SH3) += cache-sh3.o -obj-$(CONFIG_CPU_SH4) += cache-sh4.o -obj-$(CONFIG_SH7705_CACHE_32KB) += cache-sh7705.o +ifeq ($(CONFIG_SUPERH32),y) +include ${srctree}/arch/sh/mm/Makefile_32 +else +include ${srctree}/arch/sh/mm/Makefile_64 endif - -mmu-y := tlb-nommu.o pg-nommu.o -mmu-$(CONFIG_MMU) := fault.o clear_page.o copy_page.o tlb-flush.o \ - ioremap.o - -obj-y += $(mmu-y) - -ifdef CONFIG_DEBUG_FS -obj-$(CONFIG_CPU_SH4) += cache-debugfs.o -endif - -ifdef CONFIG_MMU -obj-$(CONFIG_CPU_SH3) += tlb-sh3.o -obj-$(CONFIG_CPU_SH4) += tlb-sh4.o -ifndef CONFIG_CACHE_OFF -obj-$(CONFIG_CPU_SH4) += pg-sh4.o -obj-$(CONFIG_SH7705_CACHE_32KB) += pg-sh7705.o -endif -endif - -obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o -obj-$(CONFIG_32BIT) += pmb.o -obj-$(CONFIG_NUMA) += numa.o - -EXTRA_CFLAGS += -Werror diff --git a/arch/sh/mm/Makefile_32 b/arch/sh/mm/Makefile_32 new file mode 100644 index 000000000000..e295db60b91b --- /dev/null +++ b/arch/sh/mm/Makefile_32 @@ -0,0 +1,36 @@ +# +# Makefile for the Linux SuperH-specific parts of the memory manager. +# + +obj-y := init.o extable_32.o consistent.o + +ifndef CONFIG_CACHE_OFF +obj-$(CONFIG_CPU_SH2) += cache-sh2.o +obj-$(CONFIG_CPU_SH3) += cache-sh3.o +obj-$(CONFIG_CPU_SH4) += cache-sh4.o +obj-$(CONFIG_SH7705_CACHE_32KB) += cache-sh7705.o +endif + +mmu-y := tlb-nommu.o pg-nommu.o +mmu-$(CONFIG_MMU) := fault_32.o tlbflush_32.o ioremap_32.o + +obj-y += $(mmu-y) + +ifdef CONFIG_DEBUG_FS +obj-$(CONFIG_CPU_SH4) += cache-debugfs.o +endif + +ifdef CONFIG_MMU +obj-$(CONFIG_CPU_SH3) += tlb-sh3.o +obj-$(CONFIG_CPU_SH4) += tlb-sh4.o +ifndef CONFIG_CACHE_OFF +obj-$(CONFIG_CPU_SH4) += pg-sh4.o +obj-$(CONFIG_SH7705_CACHE_32KB) += pg-sh7705.o +endif +endif + +obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o +obj-$(CONFIG_PMB) += pmb.o +obj-$(CONFIG_NUMA) += numa.o + +EXTRA_CFLAGS += -Werror diff --git a/arch/sh/mm/Makefile_64 b/arch/sh/mm/Makefile_64 new file mode 100644 index 000000000000..cbd6aa33c5ac --- /dev/null +++ b/arch/sh/mm/Makefile_64 @@ -0,0 +1,44 @@ +# +# Makefile for the Linux SuperH-specific parts of the memory manager. +# + +obj-y := init.o extable_64.o consistent.o + +mmu-y := tlb-nommu.o pg-nommu.o +mmu-$(CONFIG_MMU) := fault_64.o ioremap_64.o tlbflush_64.o tlb-sh5.o + +ifndef CONFIG_CACHE_OFF +obj-y += cache-sh5.o +endif + +obj-y += $(mmu-y) + +obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o +obj-$(CONFIG_NUMA) += numa.o + +EXTRA_CFLAGS += -Werror + +# Special flags for fault_64.o. This puts restrictions on the number of +# caller-save registers that the compiler can target when building this file. +# This is required because the code is called from a context in entry.S where +# very few registers have been saved in the exception handler (for speed +# reasons). +# The caller save registers that have been saved and which can be used are +# r2,r3,r4,r5 : argument passing +# r15, r18 : SP and LINK +# tr0-4 : allow all caller-save TR's. The compiler seems to be able to make +# use of them, so it's probably beneficial to performance to save them +# and have them available for it. +# +# The resources not listed below are callee save, i.e. the compiler is free to +# use any of them and will spill them to the stack itself. + +CFLAGS_fault_64.o += -ffixed-r7 \ + -ffixed-r8 -ffixed-r9 -ffixed-r10 -ffixed-r11 -ffixed-r12 \ + -ffixed-r13 -ffixed-r14 -ffixed-r16 -ffixed-r17 -ffixed-r19 \ + -ffixed-r20 -ffixed-r21 -ffixed-r22 -ffixed-r23 \ + -ffixed-r24 -ffixed-r25 -ffixed-r26 -ffixed-r27 \ + -ffixed-r36 -ffixed-r37 -ffixed-r38 -ffixed-r39 -ffixed-r40 \ + -ffixed-r41 -ffixed-r42 -ffixed-r43 \ + -ffixed-r60 -ffixed-r61 -ffixed-r62 \ + -fomit-frame-pointer diff --git a/arch/sh/mm/cache-debugfs.c b/arch/sh/mm/cache-debugfs.c index de6d2c9aa477..db6d950b6f5e 100644 --- a/arch/sh/mm/cache-debugfs.c +++ b/arch/sh/mm/cache-debugfs.c @@ -22,7 +22,8 @@ enum cache_type { CACHE_TYPE_UNIFIED, }; -static int cache_seq_show(struct seq_file *file, void *iter) +static int __uses_jump_to_uncached cache_seq_show(struct seq_file *file, + void *iter) { unsigned int cache_type = (unsigned int)file->private; struct cache_info *cache; @@ -34,11 +35,11 @@ static int cache_seq_show(struct seq_file *file, void *iter) * Go uncached immediately so we don't skew the results any * more than we already are.. */ - jump_to_P2(); + jump_to_uncached(); ccr = ctrl_inl(CCR); if ((ccr & CCR_CACHE_ENABLE) == 0) { - back_to_P1(); + back_to_cached(); seq_printf(file, "disabled\n"); return 0; @@ -104,7 +105,7 @@ static int cache_seq_show(struct seq_file *file, void *iter) addrstart += cache->way_incr; } - back_to_P1(); + back_to_cached(); return 0; } diff --git a/arch/sh/mm/cache-sh4.c b/arch/sh/mm/cache-sh4.c index 226b190c5b9c..43d7ff6b6ec7 100644 --- a/arch/sh/mm/cache-sh4.c +++ b/arch/sh/mm/cache-sh4.c @@ -190,7 +190,7 @@ void flush_icache_range(unsigned long start, unsigned long end) * .. which happens to be the same behavior as flush_icache_range(). * So, we simply flush out a line. */ -void flush_cache_sigtramp(unsigned long addr) +void __uses_jump_to_uncached flush_cache_sigtramp(unsigned long addr) { unsigned long v, index; unsigned long flags; @@ -205,13 +205,13 @@ void flush_cache_sigtramp(unsigned long addr) (v & boot_cpu_data.icache.entry_mask); local_irq_save(flags); - jump_to_P2(); + jump_to_uncached(); for (i = 0; i < boot_cpu_data.icache.ways; i++, index += boot_cpu_data.icache.way_incr) ctrl_outl(0, index); /* Clear out Valid-bit */ - back_to_P1(); + back_to_cached(); wmb(); local_irq_restore(flags); } @@ -256,12 +256,12 @@ void flush_dcache_page(struct page *page) } /* TODO: Selective icache invalidation through IC address array.. */ -static inline void flush_icache_all(void) +static inline void __uses_jump_to_uncached flush_icache_all(void) { unsigned long flags, ccr; local_irq_save(flags); - jump_to_P2(); + jump_to_uncached(); /* Flush I-cache */ ccr = ctrl_inl(CCR); @@ -269,11 +269,11 @@ static inline void flush_icache_all(void) ctrl_outl(ccr, CCR); /* - * back_to_P1() will take care of the barrier for us, don't add + * back_to_cached() will take care of the barrier for us, don't add * another one! */ - back_to_P1(); + back_to_cached(); local_irq_restore(flags); } diff --git a/arch/sh/mm/cache-sh5.c b/arch/sh/mm/cache-sh5.c new file mode 100644 index 000000000000..4617e3aeee73 --- /dev/null +++ b/arch/sh/mm/cache-sh5.c @@ -0,0 +1,1029 @@ +/* + * arch/sh/mm/cache-sh5.c + * + * Original version Copyright (C) 2000, 2001 Paolo Alberelli + * Second version Copyright (C) benedict.gaster@superh.com 2002 + * Third version Copyright Richard.Curnow@superh.com 2003 + * Hacks to third version Copyright (C) 2003 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/init.h> +#include <linux/mman.h> +#include <linux/mm.h> +#include <linux/threads.h> +#include <asm/page.h> +#include <asm/pgtable.h> +#include <asm/processor.h> +#include <asm/cache.h> +#include <asm/tlb.h> +#include <asm/io.h> +#include <asm/uaccess.h> +#include <asm/mmu_context.h> +#include <asm/pgalloc.h> /* for flush_itlb_range */ + +#include <linux/proc_fs.h> + +/* This function is in entry.S */ +extern unsigned long switch_and_save_asid(unsigned long new_asid); + +/* Wired TLB entry for the D-cache */ +static unsigned long long dtlb_cache_slot; + +/** + * sh64_cache_init() + * + * This is pretty much just a straightforward clone of the SH + * detect_cpu_and_cache_system(). + * + * This function is responsible for setting up all of the cache + * info dynamically as well as taking care of CPU probing and + * setting up the relevant subtype data. + * + * FIXME: For the time being, we only really support the SH5-101 + * out of the box, and don't support dynamic probing for things + * like the SH5-103 or even cut2 of the SH5-101. Implement this + * later! + */ +int __init sh64_cache_init(void) +{ + /* + * First, setup some sane values for the I-cache. + */ + cpu_data->icache.ways = 4; + cpu_data->icache.sets = 256; + cpu_data->icache.linesz = L1_CACHE_BYTES; + + /* + * FIXME: This can probably be cleaned up a bit as well.. for example, + * do we really need the way shift _and_ the way_step_shift ?? Judging + * by the existing code, I would guess no.. is there any valid reason + * why we need to be tracking this around? + */ + cpu_data->icache.way_shift = 13; + cpu_data->icache.entry_shift = 5; + cpu_data->icache.set_shift = 4; + cpu_data->icache.way_step_shift = 16; + cpu_data->icache.asid_shift = 2; + + /* + * way offset = cache size / associativity, so just don't factor in + * associativity in the first place.. + */ + cpu_data->icache.way_ofs = cpu_data->icache.sets * + cpu_data->icache.linesz; + + cpu_data->icache.asid_mask = 0x3fc; + cpu_data->icache.idx_mask = 0x1fe0; + cpu_data->icache.epn_mask = 0xffffe000; + cpu_data->icache.flags = 0; + + /* + * Next, setup some sane values for the D-cache. + * + * On the SH5, these are pretty consistent with the I-cache settings, + * so we just copy over the existing definitions.. these can be fixed + * up later, especially if we add runtime CPU probing. + * + * Though in the meantime it saves us from having to duplicate all of + * the above definitions.. + */ + cpu_data->dcache = cpu_data->icache; + + /* + * Setup any cache-related flags here + */ +#if defined(CONFIG_DCACHE_WRITE_THROUGH) + set_bit(SH_CACHE_MODE_WT, &(cpu_data->dcache.flags)); +#elif defined(CONFIG_DCACHE_WRITE_BACK) + set_bit(SH_CACHE_MODE_WB, &(cpu_data->dcache.flags)); +#endif + + /* + * We also need to reserve a slot for the D-cache in the DTLB, so we + * do this now .. + */ + dtlb_cache_slot = sh64_get_wired_dtlb_entry(); + + return 0; +} + +#ifdef CONFIG_DCACHE_DISABLED +#define sh64_dcache_purge_all() do { } while (0) +#define sh64_dcache_purge_coloured_phy_page(paddr, eaddr) do { } while (0) +#define sh64_dcache_purge_user_range(mm, start, end) do { } while (0) +#define sh64_dcache_purge_phy_page(paddr) do { } while (0) +#define sh64_dcache_purge_virt_page(mm, eaddr) do { } while (0) +#define sh64_dcache_purge_kernel_range(start, end) do { } while (0) +#define sh64_dcache_wback_current_user_range(start, end) do { } while (0) +#endif + +/*##########################################################################*/ + +/* From here onwards, a rewrite of the implementation, + by Richard.Curnow@superh.com. + + The major changes in this compared to the old version are; + 1. use more selective purging through OCBP instead of using ALLOCO to purge + by natural replacement. This avoids purging out unrelated cache lines + that happen to be in the same set. + 2. exploit the APIs copy_user_page and clear_user_page better + 3. be more selective about I-cache purging, in particular use invalidate_all + more sparingly. + + */ + +/*########################################################################## + SUPPORT FUNCTIONS + ##########################################################################*/ + +/****************************************************************************/ +/* The following group of functions deal with mapping and unmapping a temporary + page into the DTLB slot that have been set aside for our exclusive use. */ +/* In order to accomplish this, we use the generic interface for adding and + removing a wired slot entry as defined in arch/sh/mm/tlb-sh5.c */ +/****************************************************************************/ + +static unsigned long slot_own_flags; + +static inline void sh64_setup_dtlb_cache_slot(unsigned long eaddr, unsigned long asid, unsigned long paddr) +{ + local_irq_save(slot_own_flags); + sh64_setup_tlb_slot(dtlb_cache_slot, eaddr, asid, paddr); +} + +static inline void sh64_teardown_dtlb_cache_slot(void) +{ + sh64_teardown_tlb_slot(dtlb_cache_slot); + local_irq_restore(slot_own_flags); +} + +/****************************************************************************/ + +#ifndef CONFIG_ICACHE_DISABLED + +static void __inline__ sh64_icache_inv_all(void) +{ + unsigned long long addr, flag, data; + unsigned int flags; + + addr=ICCR0; + flag=ICCR0_ICI; + data=0; + + /* Make this a critical section for safety (probably not strictly necessary.) */ + local_irq_save(flags); + + /* Without %1 it gets unexplicably wrong */ + asm volatile("getcfg %3, 0, %0\n\t" + "or %0, %2, %0\n\t" + "putcfg %3, 0, %0\n\t" + "synci" + : "=&r" (data) + : "0" (data), "r" (flag), "r" (addr)); + + local_irq_restore(flags); +} + +static void sh64_icache_inv_kernel_range(unsigned long start, unsigned long end) +{ + /* Invalidate range of addresses [start,end] from the I-cache, where + * the addresses lie in the kernel superpage. */ + + unsigned long long ullend, addr, aligned_start; +#if (NEFF == 32) + aligned_start = (unsigned long long)(signed long long)(signed long) start; +#else +#error "NEFF != 32" +#endif + aligned_start &= L1_CACHE_ALIGN_MASK; + addr = aligned_start; +#if (NEFF == 32) + ullend = (unsigned long long) (signed long long) (signed long) end; +#else +#error "NEFF != 32" +#endif + while (addr <= ullend) { + asm __volatile__ ("icbi %0, 0" : : "r" (addr)); + addr += L1_CACHE_BYTES; + } +} + +static void sh64_icache_inv_user_page(struct vm_area_struct *vma, unsigned long eaddr) +{ + /* If we get called, we know that vma->vm_flags contains VM_EXEC. + Also, eaddr is page-aligned. */ + + unsigned long long addr, end_addr; + unsigned long flags = 0; + unsigned long running_asid, vma_asid; + addr = eaddr; + end_addr = addr + PAGE_SIZE; + + /* Check whether we can use the current ASID for the I-cache + invalidation. For example, if we're called via + access_process_vm->flush_cache_page->here, (e.g. when reading from + /proc), 'running_asid' will be that of the reader, not of the + victim. + + Also, note the risk that we might get pre-empted between the ASID + compare and blocking IRQs, and before we regain control, the + pid->ASID mapping changes. However, the whole cache will get + invalidated when the mapping is renewed, so the worst that can + happen is that the loop below ends up invalidating somebody else's + cache entries. + */ + + running_asid = get_asid(); + vma_asid = (vma->vm_mm->context & MMU_CONTEXT_ASID_MASK); + if (running_asid != vma_asid) { + local_irq_save(flags); + switch_and_save_asid(vma_asid); + } + while (addr < end_addr) { + /* Worth unrolling a little */ + asm __volatile__("icbi %0, 0" : : "r" (addr)); + asm __volatile__("icbi %0, 32" : : "r" (addr)); + asm __volatile__("icbi %0, 64" : : "r" (addr)); + asm __volatile__("icbi %0, 96" : : "r" (addr)); + addr += 128; + } + if (running_asid != vma_asid) { + switch_and_save_asid(running_asid); + local_irq_restore(flags); + } +} + +/****************************************************************************/ + +static void sh64_icache_inv_user_page_range(struct mm_struct *mm, + unsigned long start, unsigned long end) +{ + /* Used for invalidating big chunks of I-cache, i.e. assume the range + is whole pages. If 'start' or 'end' is not page aligned, the code + is conservative and invalidates to the ends of the enclosing pages. + This is functionally OK, just a performance loss. */ + + /* See the comments below in sh64_dcache_purge_user_range() regarding + the choice of algorithm. However, for the I-cache option (2) isn't + available because there are no physical tags so aliases can't be + resolved. The icbi instruction has to be used through the user + mapping. Because icbi is cheaper than ocbp on a cache hit, it + would be cheaper to use the selective code for a large range than is + possible with the D-cache. Just assume 64 for now as a working + figure. + */ + + int n_pages; + + if (!mm) return; + + n_pages = ((end - start) >> PAGE_SHIFT); + if (n_pages >= 64) { + sh64_icache_inv_all(); + } else { + unsigned long aligned_start; + unsigned long eaddr; + unsigned long after_last_page_start; + unsigned long mm_asid, current_asid; + unsigned long long flags = 0ULL; + + mm_asid = mm->context & MMU_CONTEXT_ASID_MASK; + current_asid = get_asid(); + + if (mm_asid != current_asid) { + /* Switch ASID and run the invalidate loop under cli */ + local_irq_save(flags); + switch_and_save_asid(mm_asid); + } + + aligned_start = start & PAGE_MASK; + after_last_page_start = PAGE_SIZE + ((end - 1) & PAGE_MASK); + + while (aligned_start < after_last_page_start) { + struct vm_area_struct *vma; + unsigned long vma_end; + vma = find_vma(mm, aligned_start); + if (!vma || (aligned_start <= vma->vm_end)) { + /* Avoid getting stuck in an error condition */ + aligned_start += PAGE_SIZE; + continue; + } + vma_end = vma->vm_end; + if (vma->vm_flags & VM_EXEC) { + /* Executable */ + eaddr = aligned_start; + while (eaddr < vma_end) { + sh64_icache_inv_user_page(vma, eaddr); + eaddr += PAGE_SIZE; + } + } + aligned_start = vma->vm_end; /* Skip to start of next region */ + } + if (mm_asid != current_asid) { + switch_and_save_asid(current_asid); + local_irq_restore(flags); + } + } +} + +static void sh64_icache_inv_user_small_range(struct mm_struct *mm, + unsigned long start, int len) +{ + + /* Invalidate a small range of user context I-cache, not necessarily + page (or even cache-line) aligned. */ + + unsigned long long eaddr = start; + unsigned long long eaddr_end = start + len; + unsigned long current_asid, mm_asid; + unsigned long long flags; + unsigned long long epage_start; + + /* Since this is used inside ptrace, the ASID in the mm context + typically won't match current_asid. We'll have to switch ASID to do + this. For safety, and given that the range will be small, do all + this under cli. + + Note, there is a hazard that the ASID in mm->context is no longer + actually associated with mm, i.e. if the mm->context has started a + new cycle since mm was last active. However, this is just a + performance issue: all that happens is that we invalidate lines + belonging to another mm, so the owning process has to refill them + when that mm goes live again. mm itself can't have any cache + entries because there will have been a flush_cache_all when the new + mm->context cycle started. */ + + /* Align to start of cache line. Otherwise, suppose len==8 and start + was at 32N+28 : the last 4 bytes wouldn't get invalidated. */ + eaddr = start & L1_CACHE_ALIGN_MASK; + eaddr_end = start + len; + + local_irq_save(flags); + mm_asid = mm->context & MMU_CONTEXT_ASID_MASK; + current_asid = switch_and_save_asid(mm_asid); + + epage_start = eaddr & PAGE_MASK; + + while (eaddr < eaddr_end) + { + asm __volatile__("icbi %0, 0" : : "r" (eaddr)); + eaddr += L1_CACHE_BYTES; + } + switch_and_save_asid(current_asid); + local_irq_restore(flags); +} + +static void sh64_icache_inv_current_user_range(unsigned long start, unsigned long end) +{ + /* The icbi instruction never raises ITLBMISS. i.e. if there's not a + cache hit on the virtual tag the instruction ends there, without a + TLB lookup. */ + + unsigned long long aligned_start; + unsigned long long ull_end; + unsigned long long addr; + + ull_end = end; + + /* Just invalidate over the range using the natural addresses. TLB + miss handling will be OK (TBC). Since it's for the current process, + either we're already in the right ASID context, or the ASIDs have + been recycled since we were last active in which case we might just + invalidate another processes I-cache entries : no worries, just a + performance drop for him. */ + aligned_start = start & L1_CACHE_ALIGN_MASK; + addr = aligned_start; + while (addr < ull_end) { + asm __volatile__ ("icbi %0, 0" : : "r" (addr)); + asm __volatile__ ("nop"); + asm __volatile__ ("nop"); + addr += L1_CACHE_BYTES; + } +} + +#endif /* !CONFIG_ICACHE_DISABLED */ + +/****************************************************************************/ + +#ifndef CONFIG_DCACHE_DISABLED + +/* Buffer used as the target of alloco instructions to purge data from cache + sets by natural eviction. -- RPC */ +#define DUMMY_ALLOCO_AREA_SIZE L1_CACHE_SIZE_BYTES + (1024 * 4) +static unsigned char dummy_alloco_area[DUMMY_ALLOCO_AREA_SIZE] __cacheline_aligned = { 0, }; + +/****************************************************************************/ + +static void __inline__ sh64_dcache_purge_sets(int sets_to_purge_base, int n_sets) +{ + /* Purge all ways in a particular block of sets, specified by the base + set number and number of sets. Can handle wrap-around, if that's + needed. */ + + int dummy_buffer_base_set; + unsigned long long eaddr, eaddr0, eaddr1; + int j; + int set_offset; + + dummy_buffer_base_set = ((int)&dummy_alloco_area & cpu_data->dcache.idx_mask) >> cpu_data->dcache.entry_shift; + set_offset = sets_to_purge_base - dummy_buffer_base_set; + + for (j=0; j<n_sets; j++, set_offset++) { + set_offset &= (cpu_data->dcache.sets - 1); + eaddr0 = (unsigned long long)dummy_alloco_area + (set_offset << cpu_data->dcache.entry_shift); + + /* Do one alloco which hits the required set per cache way. For + write-back mode, this will purge the #ways resident lines. There's + little point unrolling this loop because the allocos stall more if + they're too close together. */ + eaddr1 = eaddr0 + cpu_data->dcache.way_ofs * cpu_data->dcache.ways; + for (eaddr=eaddr0; eaddr<eaddr1; eaddr+=cpu_data->dcache.way_ofs) { + asm __volatile__ ("alloco %0, 0" : : "r" (eaddr)); + asm __volatile__ ("synco"); /* TAKum03020 */ + } + + eaddr1 = eaddr0 + cpu_data->dcache.way_ofs * cpu_data->dcache.ways; + for (eaddr=eaddr0; eaddr<eaddr1; eaddr+=cpu_data->dcache.way_ofs) { + /* Load from each address. Required because alloco is a NOP if + the cache is write-through. Write-through is a config option. */ + if (test_bit(SH_CACHE_MODE_WT, &(cpu_data->dcache.flags))) + *(volatile unsigned char *)(int)eaddr; + } + } + + /* Don't use OCBI to invalidate the lines. That costs cycles directly. + If the dummy block is just left resident, it will naturally get + evicted as required. */ + + return; +} + +/****************************************************************************/ + +static void sh64_dcache_purge_all(void) +{ + /* Purge the entire contents of the dcache. The most efficient way to + achieve this is to use alloco instructions on a region of unused + memory equal in size to the cache, thereby causing the current + contents to be discarded by natural eviction. The alternative, + namely reading every tag, setting up a mapping for the corresponding + page and doing an OCBP for the line, would be much more expensive. + */ + + sh64_dcache_purge_sets(0, cpu_data->dcache.sets); + + return; + +} + +/****************************************************************************/ + +static void sh64_dcache_purge_kernel_range(unsigned long start, unsigned long end) +{ + /* Purge the range of addresses [start,end] from the D-cache. The + addresses lie in the superpage mapping. There's no harm if we + overpurge at either end - just a small performance loss. */ + unsigned long long ullend, addr, aligned_start; +#if (NEFF == 32) + aligned_start = (unsigned long long)(signed long long)(signed long) start; +#else +#error "NEFF != 32" +#endif + aligned_start &= L1_CACHE_ALIGN_MASK; + addr = aligned_start; +#if (NEFF == 32) + ullend = (unsigned long long) (signed long long) (signed long) end; +#else +#error "NEFF != 32" +#endif + while (addr <= ullend) { + asm __volatile__ ("ocbp %0, 0" : : "r" (addr)); + addr += L1_CACHE_BYTES; + } + return; +} + +/* Assumes this address (+ (2**n_synbits) pages up from it) aren't used for + anything else in the kernel */ +#define MAGIC_PAGE0_START 0xffffffffec000000ULL + +static void sh64_dcache_purge_coloured_phy_page(unsigned long paddr, unsigned long eaddr) +{ + /* Purge the physical page 'paddr' from the cache. It's known that any + cache lines requiring attention have the same page colour as the the + address 'eaddr'. + + This relies on the fact that the D-cache matches on physical tags + when no virtual tag matches. So we create an alias for the original + page and purge through that. (Alternatively, we could have done + this by switching ASID to match the original mapping and purged + through that, but that involves ASID switching cost + probably a + TLBMISS + refill anyway.) + */ + + unsigned long long magic_page_start; + unsigned long long magic_eaddr, magic_eaddr_end; + + magic_page_start = MAGIC_PAGE0_START + (eaddr & CACHE_OC_SYN_MASK); + + /* As long as the kernel is not pre-emptible, this doesn't need to be + under cli/sti. */ + + sh64_setup_dtlb_cache_slot(magic_page_start, get_asid(), paddr); + + magic_eaddr = magic_page_start; + magic_eaddr_end = magic_eaddr + PAGE_SIZE; + while (magic_eaddr < magic_eaddr_end) { + /* Little point in unrolling this loop - the OCBPs are blocking + and won't go any quicker (i.e. the loop overhead is parallel + to part of the OCBP execution.) */ + asm __volatile__ ("ocbp %0, 0" : : "r" (magic_eaddr)); + magic_eaddr += L1_CACHE_BYTES; + } + + sh64_teardown_dtlb_cache_slot(); +} + +/****************************************************************************/ + +static void sh64_dcache_purge_phy_page(unsigned long paddr) +{ + /* Pure a page given its physical start address, by creating a + temporary 1 page mapping and purging across that. Even if we know + the virtual address (& vma or mm) of the page, the method here is + more elegant because it avoids issues of coping with page faults on + the purge instructions (i.e. no special-case code required in the + critical path in the TLB miss handling). */ + + unsigned long long eaddr_start, eaddr, eaddr_end; + int i; + + /* As long as the kernel is not pre-emptible, this doesn't need to be + under cli/sti. */ + + eaddr_start = MAGIC_PAGE0_START; + for (i=0; i < (1 << CACHE_OC_N_SYNBITS); i++) { + sh64_setup_dtlb_cache_slot(eaddr_start, get_asid(), paddr); + + eaddr = eaddr_start; + eaddr_end = eaddr + PAGE_SIZE; + while (eaddr < eaddr_end) { + asm __volatile__ ("ocbp %0, 0" : : "r" (eaddr)); + eaddr += L1_CACHE_BYTES; + } + + sh64_teardown_dtlb_cache_slot(); + eaddr_start += PAGE_SIZE; + } +} + +static void sh64_dcache_purge_user_pages(struct mm_struct *mm, + unsigned long addr, unsigned long end) +{ + pgd_t *pgd; + pmd_t *pmd; + pte_t *pte; + pte_t entry; + spinlock_t *ptl; + unsigned long paddr; + + if (!mm) + return; /* No way to find physical address of page */ + + pgd = pgd_offset(mm, addr); + if (pgd_bad(*pgd)) + return; + + pmd = pmd_offset(pgd, addr); + if (pmd_none(*pmd) || pmd_bad(*pmd)) + return; + + pte = pte_offset_map_lock(mm, pmd, addr, &ptl); + do { + entry = *pte; + if (pte_none(entry) || !pte_present(entry)) + continue; + paddr = pte_val(entry) & PAGE_MASK; + sh64_dcache_purge_coloured_phy_page(paddr, addr); + } while (pte++, addr += PAGE_SIZE, addr != end); + pte_unmap_unlock(pte - 1, ptl); +} +/****************************************************************************/ + +static void sh64_dcache_purge_user_range(struct mm_struct *mm, + unsigned long start, unsigned long end) +{ + /* There are at least 5 choices for the implementation of this, with + pros (+), cons(-), comments(*): + + 1. ocbp each line in the range through the original user's ASID + + no lines spuriously evicted + - tlbmiss handling (must either handle faults on demand => extra + special-case code in tlbmiss critical path), or map the page in + advance (=> flush_tlb_range in advance to avoid multiple hits) + - ASID switching + - expensive for large ranges + + 2. temporarily map each page in the range to a special effective + address and ocbp through the temporary mapping; relies on the + fact that SH-5 OCB* always do TLB lookup and match on ptags (they + never look at the etags) + + no spurious evictions + - expensive for large ranges + * surely cheaper than (1) + + 3. walk all the lines in the cache, check the tags, if a match + occurs create a page mapping to ocbp the line through + + no spurious evictions + - tag inspection overhead + - (especially for small ranges) + - potential cost of setting up/tearing down page mapping for + every line that matches the range + * cost partly independent of range size + + 4. walk all the lines in the cache, check the tags, if a match + occurs use 4 * alloco to purge the line (+3 other probably + innocent victims) by natural eviction + + no tlb mapping overheads + - spurious evictions + - tag inspection overhead + + 5. implement like flush_cache_all + + no tag inspection overhead + - spurious evictions + - bad for small ranges + + (1) can be ruled out as more expensive than (2). (2) appears best + for small ranges. The choice between (3), (4) and (5) for large + ranges and the range size for the large/small boundary need + benchmarking to determine. + + For now use approach (2) for small ranges and (5) for large ones. + + */ + + int n_pages; + + n_pages = ((end - start) >> PAGE_SHIFT); + if (n_pages >= 64 || ((start ^ (end - 1)) & PMD_MASK)) { +#if 1 + sh64_dcache_purge_all(); +#else + unsigned long long set, way; + unsigned long mm_asid = mm->context & MMU_CONTEXT_ASID_MASK; + for (set = 0; set < cpu_data->dcache.sets; set++) { + unsigned long long set_base_config_addr = CACHE_OC_ADDRESS_ARRAY + (set << cpu_data->dcache.set_shift); + for (way = 0; way < cpu_data->dcache.ways; way++) { + unsigned long long config_addr = set_base_config_addr + (way << cpu_data->dcache.way_step_shift); + unsigned long long tag0; + unsigned long line_valid; + + asm __volatile__("getcfg %1, 0, %0" : "=r" (tag0) : "r" (config_addr)); + line_valid = tag0 & SH_CACHE_VALID; + if (line_valid) { + unsigned long cache_asid; + unsigned long epn; + + cache_asid = (tag0 & cpu_data->dcache.asid_mask) >> cpu_data->dcache.asid_shift; + /* The next line needs some + explanation. The virtual tags + encode bits [31:13] of the virtual + address, bit [12] of the 'tag' being + implied by the cache set index. */ + epn = (tag0 & cpu_data->dcache.epn_mask) | ((set & 0x80) << cpu_data->dcache.entry_shift); + + if ((cache_asid == mm_asid) && (start <= epn) && (epn < end)) { + /* TODO : could optimise this + call by batching multiple + adjacent sets together. */ + sh64_dcache_purge_sets(set, 1); + break; /* Don't waste time inspecting other ways for this set */ + } + } + } + } +#endif + } else { + /* Small range, covered by a single page table page */ + start &= PAGE_MASK; /* should already be so */ + end = PAGE_ALIGN(end); /* should already be so */ + sh64_dcache_purge_user_pages(mm, start, end); + } + return; +} + +static void sh64_dcache_wback_current_user_range(unsigned long start, unsigned long end) +{ + unsigned long long aligned_start; + unsigned long long ull_end; + unsigned long long addr; + + ull_end = end; + + /* Just wback over the range using the natural addresses. TLB miss + handling will be OK (TBC) : the range has just been written to by + the signal frame setup code, so the PTEs must exist. + + Note, if we have CONFIG_PREEMPT and get preempted inside this loop, + it doesn't matter, even if the pid->ASID mapping changes whilst + we're away. In that case the cache will have been flushed when the + mapping was renewed. So the writebacks below will be nugatory (and + we'll doubtless have to fault the TLB entry/ies in again with the + new ASID), but it's a rare case. + */ + aligned_start = start & L1_CACHE_ALIGN_MASK; + addr = aligned_start; + while (addr < ull_end) { + asm __volatile__ ("ocbwb %0, 0" : : "r" (addr)); + addr += L1_CACHE_BYTES; + } +} + +/****************************************************************************/ + +/* These *MUST* lie in an area of virtual address space that's otherwise unused. */ +#define UNIQUE_EADDR_START 0xe0000000UL +#define UNIQUE_EADDR_END 0xe8000000UL + +static unsigned long sh64_make_unique_eaddr(unsigned long user_eaddr, unsigned long paddr) +{ + /* Given a physical address paddr, and a user virtual address + user_eaddr which will eventually be mapped to it, create a one-off + kernel-private eaddr mapped to the same paddr. This is used for + creating special destination pages for copy_user_page and + clear_user_page */ + + static unsigned long current_pointer = UNIQUE_EADDR_START; + unsigned long coloured_pointer; + + if (current_pointer == UNIQUE_EADDR_END) { + sh64_dcache_purge_all(); + current_pointer = UNIQUE_EADDR_START; + } + + coloured_pointer = (current_pointer & ~CACHE_OC_SYN_MASK) | (user_eaddr & CACHE_OC_SYN_MASK); + sh64_setup_dtlb_cache_slot(coloured_pointer, get_asid(), paddr); + + current_pointer += (PAGE_SIZE << CACHE_OC_N_SYNBITS); + + return coloured_pointer; +} + +/****************************************************************************/ + +static void sh64_copy_user_page_coloured(void *to, void *from, unsigned long address) +{ + void *coloured_to; + + /* Discard any existing cache entries of the wrong colour. These are + present quite often, if the kernel has recently used the page + internally, then given it up, then it's been allocated to the user. + */ + sh64_dcache_purge_coloured_phy_page(__pa(to), (unsigned long) to); + + coloured_to = (void *) sh64_make_unique_eaddr(address, __pa(to)); + sh64_page_copy(from, coloured_to); + + sh64_teardown_dtlb_cache_slot(); +} + +static void sh64_clear_user_page_coloured(void *to, unsigned long address) +{ + void *coloured_to; + + /* Discard any existing kernel-originated lines of the wrong colour (as + above) */ + sh64_dcache_purge_coloured_phy_page(__pa(to), (unsigned long) to); + + coloured_to = (void *) sh64_make_unique_eaddr(address, __pa(to)); + sh64_page_clear(coloured_to); + + sh64_teardown_dtlb_cache_slot(); +} + +#endif /* !CONFIG_DCACHE_DISABLED */ + +/****************************************************************************/ + +/*########################################################################## + EXTERNALLY CALLABLE API. + ##########################################################################*/ + +/* These functions are described in Documentation/cachetlb.txt. + Each one of these functions varies in behaviour depending on whether the + I-cache and/or D-cache are configured out. + + Note that the Linux term 'flush' corresponds to what is termed 'purge' in + the sh/sh64 jargon for the D-cache, i.e. write back dirty data then + invalidate the cache lines, and 'invalidate' for the I-cache. + */ + +#undef FLUSH_TRACE + +void flush_cache_all(void) +{ + /* Invalidate the entire contents of both caches, after writing back to + memory any dirty data from the D-cache. */ + sh64_dcache_purge_all(); + sh64_icache_inv_all(); +} + +/****************************************************************************/ + +void flush_cache_mm(struct mm_struct *mm) +{ + /* Invalidate an entire user-address space from both caches, after + writing back dirty data (e.g. for shared mmap etc). */ + + /* This could be coded selectively by inspecting all the tags then + doing 4*alloco on any set containing a match (as for + flush_cache_range), but fork/exit/execve (where this is called from) + are expensive anyway. */ + + /* Have to do a purge here, despite the comments re I-cache below. + There could be odd-coloured dirty data associated with the mm still + in the cache - if this gets written out through natural eviction + after the kernel has reused the page there will be chaos. + */ + + sh64_dcache_purge_all(); + + /* The mm being torn down won't ever be active again, so any Icache + lines tagged with its ASID won't be visible for the rest of the + lifetime of this ASID cycle. Before the ASID gets reused, there + will be a flush_cache_all. Hence we don't need to touch the + I-cache. This is similar to the lack of action needed in + flush_tlb_mm - see fault.c. */ +} + +/****************************************************************************/ + +void flush_cache_range(struct vm_area_struct *vma, unsigned long start, + unsigned long end) +{ + struct mm_struct *mm = vma->vm_mm; + + /* Invalidate (from both caches) the range [start,end) of virtual + addresses from the user address space specified by mm, after writing + back any dirty data. + + Note, 'end' is 1 byte beyond the end of the range to flush. */ + + sh64_dcache_purge_user_range(mm, start, end); + sh64_icache_inv_user_page_range(mm, start, end); +} + +/****************************************************************************/ + +void flush_cache_page(struct vm_area_struct *vma, unsigned long eaddr, unsigned long pfn) +{ + /* Invalidate any entries in either cache for the vma within the user + address space vma->vm_mm for the page starting at virtual address + 'eaddr'. This seems to be used primarily in breaking COW. Note, + the I-cache must be searched too in case the page in question is + both writable and being executed from (e.g. stack trampolines.) + + Note, this is called with pte lock held. + */ + + sh64_dcache_purge_phy_page(pfn << PAGE_SHIFT); + + if (vma->vm_flags & VM_EXEC) { + sh64_icache_inv_user_page(vma, eaddr); + } +} + +/****************************************************************************/ + +#ifndef CONFIG_DCACHE_DISABLED + +void copy_user_page(void *to, void *from, unsigned long address, struct page *page) +{ + /* 'from' and 'to' are kernel virtual addresses (within the superpage + mapping of the physical RAM). 'address' is the user virtual address + where the copy 'to' will be mapped after. This allows a custom + mapping to be used to ensure that the new copy is placed in the + right cache sets for the user to see it without having to bounce it + out via memory. Note however : the call to flush_page_to_ram in + (generic)/mm/memory.c:(break_cow) undoes all this good work in that one + very important case! + + TBD : can we guarantee that on every call, any cache entries for + 'from' are in the same colour sets as 'address' also? i.e. is this + always used just to deal with COW? (I suspect not). */ + + /* There are two possibilities here for when the page 'from' was last accessed: + * by the kernel : this is OK, no purge required. + * by the/a user (e.g. for break_COW) : need to purge. + + If the potential user mapping at 'address' is the same colour as + 'from' there is no need to purge any cache lines from the 'from' + page mapped into cache sets of colour 'address'. (The copy will be + accessing the page through 'from'). + */ + + if (((address ^ (unsigned long) from) & CACHE_OC_SYN_MASK) != 0) { + sh64_dcache_purge_coloured_phy_page(__pa(from), address); + } + + if (((address ^ (unsigned long) to) & CACHE_OC_SYN_MASK) == 0) { + /* No synonym problem on destination */ + sh64_page_copy(from, to); + } else { + sh64_copy_user_page_coloured(to, from, address); + } + + /* Note, don't need to flush 'from' page from the cache again - it's + done anyway by the generic code */ +} + +void clear_user_page(void *to, unsigned long address, struct page *page) +{ + /* 'to' is a kernel virtual address (within the superpage + mapping of the physical RAM). 'address' is the user virtual address + where the 'to' page will be mapped after. This allows a custom + mapping to be used to ensure that the new copy is placed in the + right cache sets for the user to see it without having to bounce it + out via memory. + */ + + if (((address ^ (unsigned long) to) & CACHE_OC_SYN_MASK) == 0) { + /* No synonym problem on destination */ + sh64_page_clear(to); + } else { + sh64_clear_user_page_coloured(to, address); + } +} + +#endif /* !CONFIG_DCACHE_DISABLED */ + +/****************************************************************************/ + +void flush_dcache_page(struct page *page) +{ + sh64_dcache_purge_phy_page(page_to_phys(page)); + wmb(); +} + +/****************************************************************************/ + +void flush_icache_range(unsigned long start, unsigned long end) +{ + /* Flush the range [start,end] of kernel virtual adddress space from + the I-cache. The corresponding range must be purged from the + D-cache also because the SH-5 doesn't have cache snooping between + the caches. The addresses will be visible through the superpage + mapping, therefore it's guaranteed that there no cache entries for + the range in cache sets of the wrong colour. + + Primarily used for cohering the I-cache after a module has + been loaded. */ + + /* We also make sure to purge the same range from the D-cache since + flush_page_to_ram() won't be doing this for us! */ + + sh64_dcache_purge_kernel_range(start, end); + wmb(); + sh64_icache_inv_kernel_range(start, end); +} + +/****************************************************************************/ + +void flush_icache_user_range(struct vm_area_struct *vma, + struct page *page, unsigned long addr, int len) +{ + /* Flush the range of user (defined by vma->vm_mm) address space + starting at 'addr' for 'len' bytes from the cache. The range does + not straddle a page boundary, the unique physical page containing + the range is 'page'. This seems to be used mainly for invalidating + an address range following a poke into the program text through the + ptrace() call from another process (e.g. for BRK instruction + insertion). */ + + sh64_dcache_purge_coloured_phy_page(page_to_phys(page), addr); + mb(); + + if (vma->vm_flags & VM_EXEC) { + sh64_icache_inv_user_small_range(vma->vm_mm, addr, len); + } +} + +/*########################################################################## + ARCH/SH64 PRIVATE CALLABLE API. + ##########################################################################*/ + +void flush_cache_sigtramp(unsigned long start, unsigned long end) +{ + /* For the address range [start,end), write back the data from the + D-cache and invalidate the corresponding region of the I-cache for + the current process. Used to flush signal trampolines on the stack + to make them executable. */ + + sh64_dcache_wback_current_user_range(start, end); + wmb(); + sh64_icache_inv_current_user_range(start, end); +} + diff --git a/arch/sh/mm/cache-sh7705.c b/arch/sh/mm/cache-sh7705.c index 4896d7376926..22dacc778823 100644 --- a/arch/sh/mm/cache-sh7705.c +++ b/arch/sh/mm/cache-sh7705.c @@ -71,7 +71,7 @@ void flush_icache_range(unsigned long start, unsigned long end) /* * Writeback&Invalidate the D-cache of the page */ -static void __flush_dcache_page(unsigned long phys) +static void __uses_jump_to_uncached __flush_dcache_page(unsigned long phys) { unsigned long ways, waysize, addrstart; unsigned long flags; @@ -92,7 +92,7 @@ static void __flush_dcache_page(unsigned long phys) * possible. */ local_irq_save(flags); - jump_to_P2(); + jump_to_uncached(); ways = current_cpu_data.dcache.ways; waysize = current_cpu_data.dcache.sets; @@ -118,7 +118,7 @@ static void __flush_dcache_page(unsigned long phys) addrstart += current_cpu_data.dcache.way_incr; } while (--ways); - back_to_P1(); + back_to_cached(); local_irq_restore(flags); } @@ -132,15 +132,15 @@ void flush_dcache_page(struct page *page) __flush_dcache_page(PHYSADDR(page_address(page))); } -void flush_cache_all(void) +void __uses_jump_to_uncached flush_cache_all(void) { unsigned long flags; local_irq_save(flags); - jump_to_P2(); + jump_to_uncached(); cache_wback_all(); - back_to_P1(); + back_to_cached(); local_irq_restore(flags); } diff --git a/arch/sh/mm/consistent.c b/arch/sh/mm/consistent.c index e220c29a3c00..7b2131c9eeda 100644 --- a/arch/sh/mm/consistent.c +++ b/arch/sh/mm/consistent.c @@ -1,7 +1,9 @@ /* * arch/sh/mm/consistent.c * - * Copyright (C) 2004 Paul Mundt + * Copyright (C) 2004 - 2007 Paul Mundt + * + * Declared coherent memory functions based on arch/x86/kernel/pci-dma_32.c * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive @@ -13,58 +15,152 @@ #include <asm/addrspace.h> #include <asm/io.h> -void *consistent_alloc(gfp_t gfp, size_t size, dma_addr_t *handle) +struct dma_coherent_mem { + void *virt_base; + u32 device_base; + int size; + int flags; + unsigned long *bitmap; +}; + +void *dma_alloc_coherent(struct device *dev, size_t size, + dma_addr_t *dma_handle, gfp_t gfp) { - struct page *page, *end, *free; void *ret; - int order; + struct dma_coherent_mem *mem = dev ? dev->dma_mem : NULL; + int order = get_order(size); - size = PAGE_ALIGN(size); - order = get_order(size); + if (mem) { + int page = bitmap_find_free_region(mem->bitmap, mem->size, + order); + if (page >= 0) { + *dma_handle = mem->device_base + (page << PAGE_SHIFT); + ret = mem->virt_base + (page << PAGE_SHIFT); + memset(ret, 0, size); + return ret; + } + if (mem->flags & DMA_MEMORY_EXCLUSIVE) + return NULL; + } - page = alloc_pages(gfp, order); - if (!page) - return NULL; - split_page(page, order); + ret = (void *)__get_free_pages(gfp, order); - ret = page_address(page); - memset(ret, 0, size); - *handle = virt_to_phys(ret); + if (ret != NULL) { + memset(ret, 0, size); + /* + * Pages from the page allocator may have data present in + * cache. So flush the cache before using uncached memory. + */ + dma_cache_sync(NULL, ret, size, DMA_BIDIRECTIONAL); + *dma_handle = virt_to_phys(ret); + } + return ret; +} +EXPORT_SYMBOL(dma_alloc_coherent); - /* - * We must flush the cache before we pass it on to the device - */ - __flush_purge_region(ret, size); +void dma_free_coherent(struct device *dev, size_t size, + void *vaddr, dma_addr_t dma_handle) +{ + struct dma_coherent_mem *mem = dev ? dev->dma_mem : NULL; + int order = get_order(size); - page = virt_to_page(ret); - free = page + (size >> PAGE_SHIFT); - end = page + (1 << order); + if (mem && vaddr >= mem->virt_base && vaddr < (mem->virt_base + (mem->size << PAGE_SHIFT))) { + int page = (vaddr - mem->virt_base) >> PAGE_SHIFT; - while (++page < end) { - /* Free any unused pages */ - if (page >= free) { - __free_page(page); - } + bitmap_release_region(mem->bitmap, page, order); + } else { + WARN_ON(irqs_disabled()); /* for portability */ + BUG_ON(mem && mem->flags & DMA_MEMORY_EXCLUSIVE); + free_pages((unsigned long)vaddr, order); } +} +EXPORT_SYMBOL(dma_free_coherent); + +int dma_declare_coherent_memory(struct device *dev, dma_addr_t bus_addr, + dma_addr_t device_addr, size_t size, int flags) +{ + void __iomem *mem_base = NULL; + int pages = size >> PAGE_SHIFT; + int bitmap_size = BITS_TO_LONGS(pages) * sizeof(long); + + if ((flags & (DMA_MEMORY_MAP | DMA_MEMORY_IO)) == 0) + goto out; + if (!size) + goto out; + if (dev->dma_mem) + goto out; + + /* FIXME: this routine just ignores DMA_MEMORY_INCLUDES_CHILDREN */ - return P2SEGADDR(ret); + mem_base = ioremap_nocache(bus_addr, size); + if (!mem_base) + goto out; + + dev->dma_mem = kmalloc(sizeof(struct dma_coherent_mem), GFP_KERNEL); + if (!dev->dma_mem) + goto out; + dev->dma_mem->bitmap = kzalloc(bitmap_size, GFP_KERNEL); + if (!dev->dma_mem->bitmap) + goto free1_out; + + dev->dma_mem->virt_base = mem_base; + dev->dma_mem->device_base = device_addr; + dev->dma_mem->size = pages; + dev->dma_mem->flags = flags; + + if (flags & DMA_MEMORY_MAP) + return DMA_MEMORY_MAP; + + return DMA_MEMORY_IO; + + free1_out: + kfree(dev->dma_mem); + out: + if (mem_base) + iounmap(mem_base); + return 0; } +EXPORT_SYMBOL(dma_declare_coherent_memory); -void consistent_free(void *vaddr, size_t size) +void dma_release_declared_memory(struct device *dev) { - unsigned long addr = P1SEGADDR((unsigned long)vaddr); - struct page *page=virt_to_page(addr); - int num_pages=(size+PAGE_SIZE-1) >> PAGE_SHIFT; - int i; + struct dma_coherent_mem *mem = dev->dma_mem; - for(i=0;i<num_pages;i++) { - __free_page((page+i)); - } + if (!mem) + return; + dev->dma_mem = NULL; + iounmap(mem->virt_base); + kfree(mem->bitmap); + kfree(mem); } +EXPORT_SYMBOL(dma_release_declared_memory); -void consistent_sync(void *vaddr, size_t size, int direction) +void *dma_mark_declared_memory_occupied(struct device *dev, + dma_addr_t device_addr, size_t size) { - void * p1addr = (void*) P1SEGADDR((unsigned long)vaddr); + struct dma_coherent_mem *mem = dev->dma_mem; + int pages = (size + (device_addr & ~PAGE_MASK) + PAGE_SIZE - 1) >> PAGE_SHIFT; + int pos, err; + + if (!mem) + return ERR_PTR(-EINVAL); + + pos = (device_addr - mem->device_base) >> PAGE_SHIFT; + err = bitmap_allocate_region(mem->bitmap, pos, get_order(pages)); + if (err != 0) + return ERR_PTR(err); + return mem->virt_base + (pos << PAGE_SHIFT); +} +EXPORT_SYMBOL(dma_mark_declared_memory_occupied); + +void dma_cache_sync(struct device *dev, void *vaddr, size_t size, + enum dma_data_direction direction) +{ +#ifdef CONFIG_CPU_SH5 + void *p1addr = vaddr; +#else + void *p1addr = (void*) P1SEGADDR((unsigned long)vaddr); +#endif switch (direction) { case DMA_FROM_DEVICE: /* invalidate only */ @@ -80,8 +176,4 @@ void consistent_sync(void *vaddr, size_t size, int direction) BUG(); } } - -EXPORT_SYMBOL(consistent_alloc); -EXPORT_SYMBOL(consistent_free); -EXPORT_SYMBOL(consistent_sync); - +EXPORT_SYMBOL(dma_cache_sync); diff --git a/arch/sh/mm/extable.c b/arch/sh/mm/extable_32.c index c1cf4463d09d..c1cf4463d09d 100644 --- a/arch/sh/mm/extable.c +++ b/arch/sh/mm/extable_32.c diff --git a/arch/sh/mm/extable_64.c b/arch/sh/mm/extable_64.c new file mode 100644 index 000000000000..f05499688d88 --- /dev/null +++ b/arch/sh/mm/extable_64.c @@ -0,0 +1,82 @@ +/* + * arch/sh/mm/extable_64.c + * + * Copyright (C) 2003 Richard Curnow + * Copyright (C) 2003, 2004 Paul Mundt + * + * Cloned from the 2.5 SH version.. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/rwsem.h> +#include <linux/module.h> +#include <asm/uaccess.h> + +extern unsigned long copy_user_memcpy, copy_user_memcpy_end; +extern void __copy_user_fixup(void); + +static const struct exception_table_entry __copy_user_fixup_ex = { + .fixup = (unsigned long)&__copy_user_fixup, +}; + +/* + * Some functions that may trap due to a bad user-mode address have too + * many loads and stores in them to make it at all practical to label + * each one and put them all in the main exception table. + * + * In particular, the fast memcpy routine is like this. It's fix-up is + * just to fall back to a slow byte-at-a-time copy, which is handled the + * conventional way. So it's functionally OK to just handle any trap + * occurring in the fast memcpy with that fixup. + */ +static const struct exception_table_entry *check_exception_ranges(unsigned long addr) +{ + if ((addr >= (unsigned long)©_user_memcpy) && + (addr <= (unsigned long)©_user_memcpy_end)) + return &__copy_user_fixup_ex; + + return NULL; +} + +/* Simple binary search */ +const struct exception_table_entry * +search_extable(const struct exception_table_entry *first, + const struct exception_table_entry *last, + unsigned long value) +{ + const struct exception_table_entry *mid; + + mid = check_exception_ranges(value); + if (mid) + return mid; + + while (first <= last) { + long diff; + + mid = (last - first) / 2 + first; + diff = mid->insn - value; + if (diff == 0) + return mid; + else if (diff < 0) + first = mid+1; + else + last = mid-1; + } + + return NULL; +} + +int fixup_exception(struct pt_regs *regs) +{ + const struct exception_table_entry *fixup; + + fixup = search_exception_tables(regs->pc); + if (fixup) { + regs->pc = fixup->fixup; + return 1; + } + + return 0; +} diff --git a/arch/sh/mm/fault.c b/arch/sh/mm/fault_32.c index 60d74f793a1d..33b43d20e9f6 100644 --- a/arch/sh/mm/fault.c +++ b/arch/sh/mm/fault_32.c @@ -172,7 +172,7 @@ no_context: bust_spinlocks(1); if (oops_may_print()) { - __typeof__(pte_val(__pte(0))) page; + unsigned long page; if (address < PAGE_SIZE) printk(KERN_ALERT "Unable to handle kernel NULL " diff --git a/arch/sh/mm/fault_64.c b/arch/sh/mm/fault_64.c new file mode 100644 index 000000000000..399d53710d2f --- /dev/null +++ b/arch/sh/mm/fault_64.c @@ -0,0 +1,275 @@ +/* + * The SH64 TLB miss. + * + * Original code from fault.c + * Copyright (C) 2000, 2001 Paolo Alberelli + * + * Fast PTE->TLB refill path + * Copyright (C) 2003 Richard.Curnow@superh.com + * + * IMPORTANT NOTES : + * The do_fast_page_fault function is called from a context in entry.S + * where very few registers have been saved. In particular, the code in + * this file must be compiled not to use ANY caller-save registers that + * are not part of the restricted save set. Also, it means that code in + * this file must not make calls to functions elsewhere in the kernel, or + * else the excepting context will see corruption in its caller-save + * registers. Plus, the entry.S save area is non-reentrant, so this code + * has to run with SR.BL==1, i.e. no interrupts taken inside it and panic + * on any exception. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/signal.h> +#include <linux/sched.h> +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/string.h> +#include <linux/types.h> +#include <linux/ptrace.h> +#include <linux/mman.h> +#include <linux/mm.h> +#include <linux/smp.h> +#include <linux/interrupt.h> +#include <asm/system.h> +#include <asm/tlb.h> +#include <asm/io.h> +#include <asm/uaccess.h> +#include <asm/pgalloc.h> +#include <asm/mmu_context.h> +#include <asm/cpu/registers.h> + +/* Callable from fault.c, so not static */ +inline void __do_tlb_refill(unsigned long address, + unsigned long long is_text_not_data, pte_t *pte) +{ + unsigned long long ptel; + unsigned long long pteh=0; + struct tlb_info *tlbp; + unsigned long long next; + + /* Get PTEL first */ + ptel = pte_val(*pte); + + /* + * Set PTEH register + */ + pteh = address & MMU_VPN_MASK; + + /* Sign extend based on neff. */ +#if (NEFF == 32) + /* Faster sign extension */ + pteh = (unsigned long long)(signed long long)(signed long)pteh; +#else + /* General case */ + pteh = (pteh & NEFF_SIGN) ? (pteh | NEFF_MASK) : pteh; +#endif + + /* Set the ASID. */ + pteh |= get_asid() << PTEH_ASID_SHIFT; + pteh |= PTEH_VALID; + + /* Set PTEL register, set_pte has performed the sign extension */ + ptel &= _PAGE_FLAGS_HARDWARE_MASK; /* drop software flags */ + + tlbp = is_text_not_data ? &(cpu_data->itlb) : &(cpu_data->dtlb); + next = tlbp->next; + __flush_tlb_slot(next); + asm volatile ("putcfg %0,1,%2\n\n\t" + "putcfg %0,0,%1\n" + : : "r" (next), "r" (pteh), "r" (ptel) ); + + next += TLB_STEP; + if (next > tlbp->last) next = tlbp->first; + tlbp->next = next; + +} + +static int handle_vmalloc_fault(struct mm_struct *mm, + unsigned long protection_flags, + unsigned long long textaccess, + unsigned long address) +{ + pgd_t *dir; + pud_t *pud; + pmd_t *pmd; + static pte_t *pte; + pte_t entry; + + dir = pgd_offset_k(address); + + pud = pud_offset(dir, address); + if (pud_none_or_clear_bad(pud)) + return 0; + + pmd = pmd_offset(pud, address); + if (pmd_none_or_clear_bad(pmd)) + return 0; + + pte = pte_offset_kernel(pmd, address); + entry = *pte; + + if (pte_none(entry) || !pte_present(entry)) + return 0; + if ((pte_val(entry) & protection_flags) != protection_flags) + return 0; + + __do_tlb_refill(address, textaccess, pte); + + return 1; +} + +static int handle_tlbmiss(struct mm_struct *mm, + unsigned long long protection_flags, + unsigned long long textaccess, + unsigned long address) +{ + pgd_t *dir; + pud_t *pud; + pmd_t *pmd; + pte_t *pte; + pte_t entry; + + /* NB. The PGD currently only contains a single entry - there is no + page table tree stored for the top half of the address space since + virtual pages in that region should never be mapped in user mode. + (In kernel mode, the only things in that region are the 512Mb super + page (locked in), and vmalloc (modules) + I/O device pages (handled + by handle_vmalloc_fault), so no PGD for the upper half is required + by kernel mode either). + + See how mm->pgd is allocated and initialised in pgd_alloc to see why + the next test is necessary. - RPC */ + if (address >= (unsigned long) TASK_SIZE) + /* upper half - never has page table entries. */ + return 0; + + dir = pgd_offset(mm, address); + if (pgd_none(*dir) || !pgd_present(*dir)) + return 0; + if (!pgd_present(*dir)) + return 0; + + pud = pud_offset(dir, address); + if (pud_none(*pud) || !pud_present(*pud)) + return 0; + + pmd = pmd_offset(pud, address); + if (pmd_none(*pmd) || !pmd_present(*pmd)) + return 0; + + pte = pte_offset_kernel(pmd, address); + entry = *pte; + + if (pte_none(entry) || !pte_present(entry)) + return 0; + + /* + * If the page doesn't have sufficient protection bits set to + * service the kind of fault being handled, there's not much + * point doing the TLB refill. Punt the fault to the general + * handler. + */ + if ((pte_val(entry) & protection_flags) != protection_flags) + return 0; + + __do_tlb_refill(address, textaccess, pte); + + return 1; +} + +/* + * Put all this information into one structure so that everything is just + * arithmetic relative to a single base address. This reduces the number + * of movi/shori pairs needed just to load addresses of static data. + */ +struct expevt_lookup { + unsigned short protection_flags[8]; + unsigned char is_text_access[8]; + unsigned char is_write_access[8]; +}; + +#define PRU (1<<9) +#define PRW (1<<8) +#define PRX (1<<7) +#define PRR (1<<6) + +#define DIRTY (_PAGE_DIRTY | _PAGE_ACCESSED) +#define YOUNG (_PAGE_ACCESSED) + +/* Sized as 8 rather than 4 to allow checking the PTE's PRU bit against whether + the fault happened in user mode or privileged mode. */ +static struct expevt_lookup expevt_lookup_table = { + .protection_flags = {PRX, PRX, 0, 0, PRR, PRR, PRW, PRW}, + .is_text_access = {1, 1, 0, 0, 0, 0, 0, 0} +}; + +/* + This routine handles page faults that can be serviced just by refilling a + TLB entry from an existing page table entry. (This case represents a very + large majority of page faults.) Return 1 if the fault was successfully + handled. Return 0 if the fault could not be handled. (This leads into the + general fault handling in fault.c which deals with mapping file-backed + pages, stack growth, segmentation faults, swapping etc etc) + */ +asmlinkage int do_fast_page_fault(unsigned long long ssr_md, + unsigned long long expevt, + unsigned long address) +{ + struct task_struct *tsk; + struct mm_struct *mm; + unsigned long long textaccess; + unsigned long long protection_flags; + unsigned long long index; + unsigned long long expevt4; + + /* The next few lines implement a way of hashing EXPEVT into a + * small array index which can be used to lookup parameters + * specific to the type of TLBMISS being handled. + * + * Note: + * ITLBMISS has EXPEVT==0xa40 + * RTLBMISS has EXPEVT==0x040 + * WTLBMISS has EXPEVT==0x060 + */ + expevt4 = (expevt >> 4); + /* TODO : xor ssr_md into this expression too. Then we can check + * that PRU is set when it needs to be. */ + index = expevt4 ^ (expevt4 >> 5); + index &= 7; + protection_flags = expevt_lookup_table.protection_flags[index]; + textaccess = expevt_lookup_table.is_text_access[index]; + + /* SIM + * Note this is now called with interrupts still disabled + * This is to cope with being called for a missing IO port + * address with interrupts disabled. This should be fixed as + * soon as we have a better 'fast path' miss handler. + * + * Plus take care how you try and debug this stuff. + * For example, writing debug data to a port which you + * have just faulted on is not going to work. + */ + + tsk = current; + mm = tsk->mm; + + if ((address >= VMALLOC_START && address < VMALLOC_END) || + (address >= IOBASE_VADDR && address < IOBASE_END)) { + if (ssr_md) + /* + * Process-contexts can never have this address + * range mapped + */ + if (handle_vmalloc_fault(mm, protection_flags, + textaccess, address)) + return 1; + } else if (!in_interrupt() && mm) { + if (handle_tlbmiss(mm, protection_flags, textaccess, address)) + return 1; + } + + return 0; +} diff --git a/arch/sh/mm/init.c b/arch/sh/mm/init.c index d5e160da64b2..2918c6b14659 100644 --- a/arch/sh/mm/init.c +++ b/arch/sh/mm/init.c @@ -23,9 +23,7 @@ DEFINE_PER_CPU(struct mmu_gather, mmu_gathers); pgd_t swapper_pg_dir[PTRS_PER_PGD]; - -void (*copy_page)(void *from, void *to); -void (*clear_page)(void *to); +unsigned long cached_to_uncached = 0; void show_mem(void) { @@ -102,7 +100,8 @@ static void set_pte_phys(unsigned long addr, unsigned long phys, pgprot_t prot) set_pte(pte, pfn_pte(phys >> PAGE_SHIFT, prot)); - flush_tlb_one(get_asid(), addr); + if (cached_to_uncached) + flush_tlb_one(get_asid(), addr); } /* @@ -131,6 +130,37 @@ void __set_fixmap(enum fixed_addresses idx, unsigned long phys, pgprot_t prot) set_pte_phys(address, phys, prot); } + +void __init page_table_range_init(unsigned long start, unsigned long end, + pgd_t *pgd_base) +{ + pgd_t *pgd; + pud_t *pud; + pmd_t *pmd; + int pgd_idx; + unsigned long vaddr; + + vaddr = start & PMD_MASK; + end = (end + PMD_SIZE - 1) & PMD_MASK; + pgd_idx = pgd_index(vaddr); + pgd = pgd_base + pgd_idx; + + for ( ; (pgd_idx < PTRS_PER_PGD) && (vaddr != end); pgd++, pgd_idx++) { + BUG_ON(pgd_none(*pgd)); + pud = pud_offset(pgd, 0); + BUG_ON(pud_none(*pud)); + pmd = pmd_offset(pud, 0); + + if (!pmd_present(*pmd)) { + pte_t *pte_table; + pte_table = (pte_t *)alloc_bootmem_low_pages(PAGE_SIZE); + memset(pte_table, 0, PAGE_SIZE); + pmd_populate_kernel(&init_mm, pmd, pte_table); + } + + vaddr += PMD_SIZE; + } +} #endif /* CONFIG_MMU */ /* @@ -150,6 +180,11 @@ void __init paging_init(void) * check for a null value. */ set_TTB(swapper_pg_dir); + /* Populate the relevant portions of swapper_pg_dir so that + * we can use the fixmap entries without calling kmalloc. + * pte's will be filled in by __set_fixmap(). */ + page_table_range_init(FIXADDR_START, FIXADDR_TOP, swapper_pg_dir); + memset(max_zone_pfns, 0, sizeof(max_zone_pfns)); for_each_online_node(nid) { @@ -167,9 +202,22 @@ void __init paging_init(void) } free_area_init_nodes(max_zone_pfns); + + /* Set up the uncached fixmap */ + set_fixmap_nocache(FIX_UNCACHED, __pa(&__uncached_start)); + +#ifdef CONFIG_29BIT + /* + * Handle trivial transitions between cached and uncached + * segments, making use of the 1:1 mapping relationship in + * 512MB lowmem. + */ + cached_to_uncached = P2SEG - P1SEG; +#endif } static struct kcore_list kcore_mem, kcore_vmalloc; +int after_bootmem = 0; void __init mem_init(void) { @@ -202,17 +250,7 @@ void __init mem_init(void) memset(empty_zero_page, 0, PAGE_SIZE); __flush_wback_region(empty_zero_page, PAGE_SIZE); - /* - * Setup wrappers for copy/clear_page(), these will get overridden - * later in the boot process if a better method is available. - */ -#ifdef CONFIG_MMU - copy_page = copy_page_slow; - clear_page = clear_page_slow; -#else - copy_page = copy_page_nommu; - clear_page = clear_page_nommu; -#endif + after_bootmem = 1; codesize = (unsigned long) &_etext - (unsigned long) &_text; datasize = (unsigned long) &_edata - (unsigned long) &_etext; diff --git a/arch/sh/mm/ioremap.c b/arch/sh/mm/ioremap_32.c index 0c7b7e33abdc..0c7b7e33abdc 100644 --- a/arch/sh/mm/ioremap.c +++ b/arch/sh/mm/ioremap_32.c diff --git a/arch/sh/mm/ioremap_64.c b/arch/sh/mm/ioremap_64.c new file mode 100644 index 000000000000..e27d16519235 --- /dev/null +++ b/arch/sh/mm/ioremap_64.c @@ -0,0 +1,404 @@ +/* + * arch/sh/mm/ioremap_64.c + * + * Copyright (C) 2000, 2001 Paolo Alberelli + * Copyright (C) 2003 - 2007 Paul Mundt + * + * Mostly derived from arch/sh/mm/ioremap.c which, in turn is mostly + * derived from arch/i386/mm/ioremap.c . + * + * (C) Copyright 1995 1996 Linus Torvalds + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/vmalloc.h> +#include <linux/ioport.h> +#include <linux/module.h> +#include <linux/mm.h> +#include <linux/io.h> +#include <linux/bootmem.h> +#include <linux/proc_fs.h> +#include <asm/page.h> +#include <asm/pgalloc.h> +#include <asm/addrspace.h> +#include <asm/cacheflush.h> +#include <asm/tlbflush.h> +#include <asm/mmu.h> + +static void shmedia_mapioaddr(unsigned long, unsigned long); +static unsigned long shmedia_ioremap(struct resource *, u32, int); + +/* + * Generic mapping function (not visible outside): + */ + +/* + * Remap an arbitrary physical address space into the kernel virtual + * address space. Needed when the kernel wants to access high addresses + * directly. + * + * NOTE! We need to allow non-page-aligned mappings too: we will obviously + * have to convert them into an offset in a page-aligned mapping, but the + * caller shouldn't need to know that small detail. + */ +void *__ioremap(unsigned long phys_addr, unsigned long size, + unsigned long flags) +{ + void * addr; + struct vm_struct * area; + unsigned long offset, last_addr; + pgprot_t pgprot; + + /* Don't allow wraparound or zero size */ + last_addr = phys_addr + size - 1; + if (!size || last_addr < phys_addr) + return NULL; + + pgprot = __pgprot(_PAGE_PRESENT | _PAGE_READ | + _PAGE_WRITE | _PAGE_DIRTY | + _PAGE_ACCESSED | _PAGE_SHARED | flags); + + /* + * Mappings have to be page-aligned + */ + offset = phys_addr & ~PAGE_MASK; + phys_addr &= PAGE_MASK; + size = PAGE_ALIGN(last_addr + 1) - phys_addr; + + /* + * Ok, go for it.. + */ + area = get_vm_area(size, VM_IOREMAP); + pr_debug("Get vm_area returns %p addr %p\n",area,area->addr); + if (!area) + return NULL; + area->phys_addr = phys_addr; + addr = area->addr; + if (ioremap_page_range((unsigned long)addr, (unsigned long)addr + size, + phys_addr, pgprot)) { + vunmap(addr); + return NULL; + } + return (void *) (offset + (char *)addr); +} +EXPORT_SYMBOL(__ioremap); + +void __iounmap(void *addr) +{ + struct vm_struct *area; + + vfree((void *) (PAGE_MASK & (unsigned long) addr)); + area = remove_vm_area((void *) (PAGE_MASK & (unsigned long) addr)); + if (!area) { + printk(KERN_ERR "iounmap: bad address %p\n", addr); + return; + } + + kfree(area); +} +EXPORT_SYMBOL(__iounmap); + +static struct resource shmedia_iomap = { + .name = "shmedia_iomap", + .start = IOBASE_VADDR + PAGE_SIZE, + .end = IOBASE_END - 1, +}; + +static void shmedia_mapioaddr(unsigned long pa, unsigned long va); +static void shmedia_unmapioaddr(unsigned long vaddr); +static unsigned long shmedia_ioremap(struct resource *res, u32 pa, int sz); + +/* + * We have the same problem as the SPARC, so lets have the same comment: + * Our mini-allocator... + * Boy this is gross! We need it because we must map I/O for + * timers and interrupt controller before the kmalloc is available. + */ + +#define XNMLN 15 +#define XNRES 10 + +struct xresource { + struct resource xres; /* Must be first */ + int xflag; /* 1 == used */ + char xname[XNMLN+1]; +}; + +static struct xresource xresv[XNRES]; + +static struct xresource *xres_alloc(void) +{ + struct xresource *xrp; + int n; + + xrp = xresv; + for (n = 0; n < XNRES; n++) { + if (xrp->xflag == 0) { + xrp->xflag = 1; + return xrp; + } + xrp++; + } + return NULL; +} + +static void xres_free(struct xresource *xrp) +{ + xrp->xflag = 0; +} + +static struct resource *shmedia_find_resource(struct resource *root, + unsigned long vaddr) +{ + struct resource *res; + + for (res = root->child; res; res = res->sibling) + if (res->start <= vaddr && res->end >= vaddr) + return res; + + return NULL; +} + +static unsigned long shmedia_alloc_io(unsigned long phys, unsigned long size, + const char *name) +{ + static int printed_full = 0; + struct xresource *xres; + struct resource *res; + char *tack; + int tlen; + + if (name == NULL) name = "???"; + + if ((xres = xres_alloc()) != 0) { + tack = xres->xname; + res = &xres->xres; + } else { + if (!printed_full) { + printk("%s: done with statics, switching to kmalloc\n", + __FUNCTION__); + printed_full = 1; + } + tlen = strlen(name); + tack = kmalloc(sizeof (struct resource) + tlen + 1, GFP_KERNEL); + if (!tack) + return -ENOMEM; + memset(tack, 0, sizeof(struct resource)); + res = (struct resource *) tack; + tack += sizeof (struct resource); + } + + strncpy(tack, name, XNMLN); + tack[XNMLN] = 0; + res->name = tack; + + return shmedia_ioremap(res, phys, size); +} + +static unsigned long shmedia_ioremap(struct resource *res, u32 pa, int sz) +{ + unsigned long offset = ((unsigned long) pa) & (~PAGE_MASK); + unsigned long round_sz = (offset + sz + PAGE_SIZE-1) & PAGE_MASK; + unsigned long va; + unsigned int psz; + + if (allocate_resource(&shmedia_iomap, res, round_sz, + shmedia_iomap.start, shmedia_iomap.end, + PAGE_SIZE, NULL, NULL) != 0) { + panic("alloc_io_res(%s): cannot occupy\n", + (res->name != NULL)? res->name: "???"); + } + + va = res->start; + pa &= PAGE_MASK; + + psz = (res->end - res->start + (PAGE_SIZE - 1)) / PAGE_SIZE; + + /* log at boot time ... */ + printk("mapioaddr: %6s [%2d page%s] va 0x%08lx pa 0x%08x\n", + ((res->name != NULL) ? res->name : "???"), + psz, psz == 1 ? " " : "s", va, pa); + + for (psz = res->end - res->start + 1; psz != 0; psz -= PAGE_SIZE) { + shmedia_mapioaddr(pa, va); + va += PAGE_SIZE; + pa += PAGE_SIZE; + } + + res->start += offset; + res->end = res->start + sz - 1; /* not strictly necessary.. */ + + return res->start; +} + +static void shmedia_free_io(struct resource *res) +{ + unsigned long len = res->end - res->start + 1; + + BUG_ON((len & (PAGE_SIZE - 1)) != 0); + + while (len) { + len -= PAGE_SIZE; + shmedia_unmapioaddr(res->start + len); + } + + release_resource(res); +} + +static __init_refok void *sh64_get_page(void) +{ + extern int after_bootmem; + void *page; + + if (after_bootmem) { + page = (void *)get_zeroed_page(GFP_ATOMIC); + } else { + page = alloc_bootmem_pages(PAGE_SIZE); + } + + if (!page || ((unsigned long)page & ~PAGE_MASK)) + panic("sh64_get_page: Out of memory already?\n"); + + return page; +} + +static void shmedia_mapioaddr(unsigned long pa, unsigned long va) +{ + pgd_t *pgdp; + pud_t *pudp; + pmd_t *pmdp; + pte_t *ptep, pte; + pgprot_t prot; + unsigned long flags = 1; /* 1 = CB0-1 device */ + + pr_debug("shmedia_mapiopage pa %08lx va %08lx\n", pa, va); + + pgdp = pgd_offset_k(va); + if (pgd_none(*pgdp) || !pgd_present(*pgdp)) { + pudp = (pud_t *)sh64_get_page(); + set_pgd(pgdp, __pgd((unsigned long)pudp | _KERNPG_TABLE)); + } + + pudp = pud_offset(pgdp, va); + if (pud_none(*pudp) || !pud_present(*pudp)) { + pmdp = (pmd_t *)sh64_get_page(); + set_pud(pudp, __pud((unsigned long)pmdp | _KERNPG_TABLE)); + } + + pmdp = pmd_offset(pudp, va); + if (pmd_none(*pmdp) || !pmd_present(*pmdp) ) { + ptep = (pte_t *)sh64_get_page(); + set_pmd(pmdp, __pmd((unsigned long)ptep + _PAGE_TABLE)); + } + + prot = __pgprot(_PAGE_PRESENT | _PAGE_READ | _PAGE_WRITE | + _PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_SHARED | flags); + + pte = pfn_pte(pa >> PAGE_SHIFT, prot); + ptep = pte_offset_kernel(pmdp, va); + + if (!pte_none(*ptep) && + pte_val(*ptep) != pte_val(pte)) + pte_ERROR(*ptep); + + set_pte(ptep, pte); + + flush_tlb_kernel_range(va, PAGE_SIZE); +} + +static void shmedia_unmapioaddr(unsigned long vaddr) +{ + pgd_t *pgdp; + pud_t *pudp; + pmd_t *pmdp; + pte_t *ptep; + + pgdp = pgd_offset_k(vaddr); + if (pgd_none(*pgdp) || pgd_bad(*pgdp)) + return; + + pudp = pud_offset(pgdp, vaddr); + if (pud_none(*pudp) || pud_bad(*pudp)) + return; + + pmdp = pmd_offset(pudp, vaddr); + if (pmd_none(*pmdp) || pmd_bad(*pmdp)) + return; + + ptep = pte_offset_kernel(pmdp, vaddr); + + if (pte_none(*ptep) || !pte_present(*ptep)) + return; + + clear_page((void *)ptep); + pte_clear(&init_mm, vaddr, ptep); +} + +unsigned long onchip_remap(unsigned long phys, unsigned long size, const char *name) +{ + if (size < PAGE_SIZE) + size = PAGE_SIZE; + + return shmedia_alloc_io(phys, size, name); +} + +void onchip_unmap(unsigned long vaddr) +{ + struct resource *res; + unsigned int psz; + + res = shmedia_find_resource(&shmedia_iomap, vaddr); + if (!res) { + printk(KERN_ERR "%s: Failed to free 0x%08lx\n", + __FUNCTION__, vaddr); + return; + } + + psz = (res->end - res->start + (PAGE_SIZE - 1)) / PAGE_SIZE; + + printk(KERN_DEBUG "unmapioaddr: %6s [%2d page%s] freed\n", + res->name, psz, psz == 1 ? " " : "s"); + + shmedia_free_io(res); + + if ((char *)res >= (char *)xresv && + (char *)res < (char *)&xresv[XNRES]) { + xres_free((struct xresource *)res); + } else { + kfree(res); + } +} + +#ifdef CONFIG_PROC_FS +static int +ioremap_proc_info(char *buf, char **start, off_t fpos, int length, int *eof, + void *data) +{ + char *p = buf, *e = buf + length; + struct resource *r; + const char *nm; + + for (r = ((struct resource *)data)->child; r != NULL; r = r->sibling) { + if (p + 32 >= e) /* Better than nothing */ + break; + if ((nm = r->name) == 0) nm = "???"; + p += sprintf(p, "%08lx-%08lx: %s\n", + (unsigned long)r->start, + (unsigned long)r->end, nm); + } + + return p-buf; +} +#endif /* CONFIG_PROC_FS */ + +static int __init register_proc_onchip(void) +{ +#ifdef CONFIG_PROC_FS + create_proc_read_entry("io_map",0,0, ioremap_proc_info, &shmedia_iomap); +#endif + return 0; +} + +__initcall(register_proc_onchip); diff --git a/arch/sh/mm/pg-nommu.c b/arch/sh/mm/pg-nommu.c index d15221beaa16..677dd57f0877 100644 --- a/arch/sh/mm/pg-nommu.c +++ b/arch/sh/mm/pg-nommu.c @@ -14,12 +14,12 @@ #include <linux/string.h> #include <asm/page.h> -void copy_page_nommu(void *to, void *from) +void copy_page(void *to, void *from) { memcpy(to, from, PAGE_SIZE); } -void clear_page_nommu(void *to) +void clear_page(void *to) { memset(to, 0, PAGE_SIZE); } diff --git a/arch/sh/mm/pmb.c b/arch/sh/mm/pmb.c index 1d45b82f0a63..ab81c602295f 100644 --- a/arch/sh/mm/pmb.c +++ b/arch/sh/mm/pmb.c @@ -27,6 +27,7 @@ #include <asm/pgtable.h> #include <asm/mmu.h> #include <asm/io.h> +#include <asm/mmu_context.h> #define NR_PMB_ENTRIES 16 @@ -162,18 +163,18 @@ repeat: return 0; } -int set_pmb_entry(struct pmb_entry *pmbe) +int __uses_jump_to_uncached set_pmb_entry(struct pmb_entry *pmbe) { int ret; - jump_to_P2(); + jump_to_uncached(); ret = __set_pmb_entry(pmbe->vpn, pmbe->ppn, pmbe->flags, &pmbe->entry); - back_to_P1(); + back_to_cached(); return ret; } -void clear_pmb_entry(struct pmb_entry *pmbe) +void __uses_jump_to_uncached clear_pmb_entry(struct pmb_entry *pmbe) { unsigned int entry = pmbe->entry; unsigned long addr; @@ -187,7 +188,7 @@ void clear_pmb_entry(struct pmb_entry *pmbe) entry >= NR_PMB_ENTRIES)) return; - jump_to_P2(); + jump_to_uncached(); /* Clear V-bit */ addr = mk_pmb_addr(entry); @@ -196,7 +197,7 @@ void clear_pmb_entry(struct pmb_entry *pmbe) addr = mk_pmb_data(entry); ctrl_outl(ctrl_inl(addr) & ~PMB_V, addr); - back_to_P1(); + back_to_cached(); clear_bit(entry, &pmb_map); } @@ -301,17 +302,17 @@ static void pmb_cache_ctor(struct kmem_cache *cachep, void *pmb) pmbe->entry = PMB_NO_ENTRY; } -static int __init pmb_init(void) +static int __uses_jump_to_uncached pmb_init(void) { unsigned int nr_entries = ARRAY_SIZE(pmb_init_map); - unsigned int entry; + unsigned int entry, i; BUG_ON(unlikely(nr_entries >= NR_PMB_ENTRIES)); pmb_cache = kmem_cache_create("pmb", sizeof(struct pmb_entry), 0, SLAB_PANIC, pmb_cache_ctor); - jump_to_P2(); + jump_to_uncached(); /* * Ordering is important, P2 must be mapped in the PMB before we @@ -329,7 +330,12 @@ static int __init pmb_init(void) /* PMB.SE and UB[7] */ ctrl_outl((1 << 31) | (1 << 7), PMB_PASCR); - back_to_P1(); + /* Flush out the TLB */ + i = ctrl_inl(MMUCR); + i |= MMUCR_TI; + ctrl_outl(i, MMUCR); + + back_to_cached(); return 0; } diff --git a/arch/sh/mm/tlb-nommu.c b/arch/sh/mm/tlb-nommu.c index 1ccca7c0532e..15111bc7ddd6 100644 --- a/arch/sh/mm/tlb-nommu.c +++ b/arch/sh/mm/tlb-nommu.c @@ -9,6 +9,7 @@ */ #include <linux/kernel.h> #include <linux/mm.h> +#include <asm/pgtable.h> /* * Nothing too terribly exciting here .. @@ -49,3 +50,12 @@ void update_mmu_cache(struct vm_area_struct * vma, { BUG(); } + +void __init page_table_range_init(unsigned long start, unsigned long end, + pgd_t *pgd_base) +{ +} + +void __set_fixmap(enum fixed_addresses idx, unsigned long phys, pgprot_t prot) +{ +} diff --git a/arch/sh/mm/tlb-sh4.c b/arch/sh/mm/tlb-sh4.c index 2d1dd6044307..f0c7b7397fa6 100644 --- a/arch/sh/mm/tlb-sh4.c +++ b/arch/sh/mm/tlb-sh4.c @@ -79,7 +79,8 @@ void update_mmu_cache(struct vm_area_struct * vma, local_irq_restore(flags); } -void local_flush_tlb_one(unsigned long asid, unsigned long page) +void __uses_jump_to_uncached local_flush_tlb_one(unsigned long asid, + unsigned long page) { unsigned long addr, data; @@ -91,7 +92,7 @@ void local_flush_tlb_one(unsigned long asid, unsigned long page) */ addr = MMU_UTLB_ADDRESS_ARRAY | MMU_PAGE_ASSOC_BIT; data = page | asid; /* VALID bit is off */ - jump_to_P2(); + jump_to_uncached(); ctrl_outl(data, addr); - back_to_P1(); + back_to_cached(); } diff --git a/arch/sh/mm/tlb-sh5.c b/arch/sh/mm/tlb-sh5.c new file mode 100644 index 000000000000..f34274a1ded3 --- /dev/null +++ b/arch/sh/mm/tlb-sh5.c @@ -0,0 +1,164 @@ +/* + * arch/sh/mm/tlb-sh5.c + * + * Copyright (C) 2003 Paul Mundt <lethal@linux-sh.org> + * Copyright (C) 2003 Richard Curnow <richard.curnow@superh.com> + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/mm.h> +#include <linux/init.h> +#include <asm/page.h> +#include <asm/tlb.h> +#include <asm/mmu_context.h> + +/** + * sh64_tlb_init + * + * Perform initial setup for the DTLB and ITLB. + */ +int __init sh64_tlb_init(void) +{ + /* Assign some sane DTLB defaults */ + cpu_data->dtlb.entries = 64; + cpu_data->dtlb.step = 0x10; + + cpu_data->dtlb.first = DTLB_FIXED | cpu_data->dtlb.step; + cpu_data->dtlb.next = cpu_data->dtlb.first; + + cpu_data->dtlb.last = DTLB_FIXED | + ((cpu_data->dtlb.entries - 1) * + cpu_data->dtlb.step); + + /* And again for the ITLB */ + cpu_data->itlb.entries = 64; + cpu_data->itlb.step = 0x10; + + cpu_data->itlb.first = ITLB_FIXED | cpu_data->itlb.step; + cpu_data->itlb.next = cpu_data->itlb.first; + cpu_data->itlb.last = ITLB_FIXED | + ((cpu_data->itlb.entries - 1) * + cpu_data->itlb.step); + + return 0; +} + +/** + * sh64_next_free_dtlb_entry + * + * Find the next available DTLB entry + */ +unsigned long long sh64_next_free_dtlb_entry(void) +{ + return cpu_data->dtlb.next; +} + +/** + * sh64_get_wired_dtlb_entry + * + * Allocate a wired (locked-in) entry in the DTLB + */ +unsigned long long sh64_get_wired_dtlb_entry(void) +{ + unsigned long long entry = sh64_next_free_dtlb_entry(); + + cpu_data->dtlb.first += cpu_data->dtlb.step; + cpu_data->dtlb.next += cpu_data->dtlb.step; + + return entry; +} + +/** + * sh64_put_wired_dtlb_entry + * + * @entry: Address of TLB slot. + * + * Free a wired (locked-in) entry in the DTLB. + * + * Works like a stack, last one to allocate must be first one to free. + */ +int sh64_put_wired_dtlb_entry(unsigned long long entry) +{ + __flush_tlb_slot(entry); + + /* + * We don't do any particularly useful tracking of wired entries, + * so this approach works like a stack .. last one to be allocated + * has to be the first one to be freed. + * + * We could potentially load wired entries into a list and work on + * rebalancing the list periodically (which also entails moving the + * contents of a TLB entry) .. though I have a feeling that this is + * more trouble than it's worth. + */ + + /* + * Entry must be valid .. we don't want any ITLB addresses! + */ + if (entry <= DTLB_FIXED) + return -EINVAL; + + /* + * Next, check if we're within range to be freed. (ie, must be the + * entry beneath the first 'free' entry! + */ + if (entry < (cpu_data->dtlb.first - cpu_data->dtlb.step)) + return -EINVAL; + + /* If we are, then bring this entry back into the list */ + cpu_data->dtlb.first -= cpu_data->dtlb.step; + cpu_data->dtlb.next = entry; + + return 0; +} + +/** + * sh64_setup_tlb_slot + * + * @config_addr: Address of TLB slot. + * @eaddr: Virtual address. + * @asid: Address Space Identifier. + * @paddr: Physical address. + * + * Load up a virtual<->physical translation for @eaddr<->@paddr in the + * pre-allocated TLB slot @config_addr (see sh64_get_wired_dtlb_entry). + */ +inline void sh64_setup_tlb_slot(unsigned long long config_addr, + unsigned long eaddr, + unsigned long asid, + unsigned long paddr) +{ + unsigned long long pteh, ptel; + + /* Sign extension */ +#if (NEFF == 32) + pteh = (unsigned long long)(signed long long)(signed long) eaddr; +#else +#error "Can't sign extend more than 32 bits yet" +#endif + pteh &= PAGE_MASK; + pteh |= (asid << PTEH_ASID_SHIFT) | PTEH_VALID; +#if (NEFF == 32) + ptel = (unsigned long long)(signed long long)(signed long) paddr; +#else +#error "Can't sign extend more than 32 bits yet" +#endif + ptel &= PAGE_MASK; + ptel |= (_PAGE_CACHABLE | _PAGE_READ | _PAGE_WRITE); + + asm volatile("putcfg %0, 1, %1\n\t" + "putcfg %0, 0, %2\n" + : : "r" (config_addr), "r" (ptel), "r" (pteh)); +} + +/** + * sh64_teardown_tlb_slot + * + * @config_addr: Address of TLB slot. + * + * Teardown any existing mapping in the TLB slot @config_addr. + */ +inline void sh64_teardown_tlb_slot(unsigned long long config_addr) + __attribute__ ((alias("__flush_tlb_slot"))); diff --git a/arch/sh/mm/tlb-flush.c b/arch/sh/mm/tlbflush_32.c index 6f45c1f8a7fe..6f45c1f8a7fe 100644 --- a/arch/sh/mm/tlb-flush.c +++ b/arch/sh/mm/tlbflush_32.c diff --git a/arch/sh/mm/tlbflush_64.c b/arch/sh/mm/tlbflush_64.c new file mode 100644 index 000000000000..2a98c9ec88ff --- /dev/null +++ b/arch/sh/mm/tlbflush_64.c @@ -0,0 +1,475 @@ +/* + * arch/sh/mm/tlb-flush_64.c + * + * Copyright (C) 2000, 2001 Paolo Alberelli + * Copyright (C) 2003 Richard Curnow (/proc/tlb, bug fixes) + * Copyright (C) 2003 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/signal.h> +#include <linux/rwsem.h> +#include <linux/sched.h> +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/string.h> +#include <linux/types.h> +#include <linux/ptrace.h> +#include <linux/mman.h> +#include <linux/mm.h> +#include <linux/smp.h> +#include <linux/interrupt.h> +#include <asm/system.h> +#include <asm/io.h> +#include <asm/tlb.h> +#include <asm/uaccess.h> +#include <asm/pgalloc.h> +#include <asm/mmu_context.h> + +extern void die(const char *,struct pt_regs *,long); + +#define PFLAG(val,flag) (( (val) & (flag) ) ? #flag : "" ) +#define PPROT(flag) PFLAG(pgprot_val(prot),flag) + +static inline void print_prots(pgprot_t prot) +{ + printk("prot is 0x%08lx\n",pgprot_val(prot)); + + printk("%s %s %s %s %s\n",PPROT(_PAGE_SHARED),PPROT(_PAGE_READ), + PPROT(_PAGE_EXECUTE),PPROT(_PAGE_WRITE),PPROT(_PAGE_USER)); +} + +static inline void print_vma(struct vm_area_struct *vma) +{ + printk("vma start 0x%08lx\n", vma->vm_start); + printk("vma end 0x%08lx\n", vma->vm_end); + + print_prots(vma->vm_page_prot); + printk("vm_flags 0x%08lx\n", vma->vm_flags); +} + +static inline void print_task(struct task_struct *tsk) +{ + printk("Task pid %d\n", task_pid_nr(tsk)); +} + +static pte_t *lookup_pte(struct mm_struct *mm, unsigned long address) +{ + pgd_t *dir; + pud_t *pud; + pmd_t *pmd; + pte_t *pte; + pte_t entry; + + dir = pgd_offset(mm, address); + if (pgd_none(*dir)) + return NULL; + + pud = pud_offset(dir, address); + if (pud_none(*pud)) + return NULL; + + pmd = pmd_offset(pud, address); + if (pmd_none(*pmd)) + return NULL; + + pte = pte_offset_kernel(pmd, address); + entry = *pte; + if (pte_none(entry) || !pte_present(entry)) + return NULL; + + return pte; +} + +/* + * This routine handles page faults. It determines the address, + * and the problem, and then passes it off to one of the appropriate + * routines. + */ +asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long writeaccess, + unsigned long textaccess, unsigned long address) +{ + struct task_struct *tsk; + struct mm_struct *mm; + struct vm_area_struct * vma; + const struct exception_table_entry *fixup; + pte_t *pte; + int fault; + + /* SIM + * Note this is now called with interrupts still disabled + * This is to cope with being called for a missing IO port + * address with interrupts disabled. This should be fixed as + * soon as we have a better 'fast path' miss handler. + * + * Plus take care how you try and debug this stuff. + * For example, writing debug data to a port which you + * have just faulted on is not going to work. + */ + + tsk = current; + mm = tsk->mm; + + /* Not an IO address, so reenable interrupts */ + local_irq_enable(); + + /* + * If we're in an interrupt or have no user + * context, we must not take the fault.. + */ + if (in_atomic() || !mm) + goto no_context; + + /* TLB misses upon some cache flushes get done under cli() */ + down_read(&mm->mmap_sem); + + vma = find_vma(mm, address); + + if (!vma) { +#ifdef DEBUG_FAULT + print_task(tsk); + printk("%s:%d fault, address is 0x%08x PC %016Lx textaccess %d writeaccess %d\n", + __FUNCTION__,__LINE__, + address,regs->pc,textaccess,writeaccess); + show_regs(regs); +#endif + goto bad_area; + } + if (vma->vm_start <= address) { + goto good_area; + } + + if (!(vma->vm_flags & VM_GROWSDOWN)) { +#ifdef DEBUG_FAULT + print_task(tsk); + printk("%s:%d fault, address is 0x%08x PC %016Lx textaccess %d writeaccess %d\n", + __FUNCTION__,__LINE__, + address,regs->pc,textaccess,writeaccess); + show_regs(regs); + + print_vma(vma); +#endif + goto bad_area; + } + if (expand_stack(vma, address)) { +#ifdef DEBUG_FAULT + print_task(tsk); + printk("%s:%d fault, address is 0x%08x PC %016Lx textaccess %d writeaccess %d\n", + __FUNCTION__,__LINE__, + address,regs->pc,textaccess,writeaccess); + show_regs(regs); +#endif + goto bad_area; + } +/* + * Ok, we have a good vm_area for this memory access, so + * we can handle it.. + */ +good_area: + if (textaccess) { + if (!(vma->vm_flags & VM_EXEC)) + goto bad_area; + } else { + if (writeaccess) { + if (!(vma->vm_flags & VM_WRITE)) + goto bad_area; + } else { + if (!(vma->vm_flags & VM_READ)) + goto bad_area; + } + } + + /* + * If for any reason at all we couldn't handle the fault, + * make sure we exit gracefully rather than endlessly redo + * the fault. + */ +survive: + fault = handle_mm_fault(mm, vma, address, writeaccess); + if (unlikely(fault & VM_FAULT_ERROR)) { + if (fault & VM_FAULT_OOM) + goto out_of_memory; + else if (fault & VM_FAULT_SIGBUS) + goto do_sigbus; + BUG(); + } + if (fault & VM_FAULT_MAJOR) + tsk->maj_flt++; + else + tsk->min_flt++; + + /* If we get here, the page fault has been handled. Do the TLB refill + now from the newly-setup PTE, to avoid having to fault again right + away on the same instruction. */ + pte = lookup_pte (mm, address); + if (!pte) { + /* From empirical evidence, we can get here, due to + !pte_present(pte). (e.g. if a swap-in occurs, and the page + is swapped back out again before the process that wanted it + gets rescheduled?) */ + goto no_pte; + } + + __do_tlb_refill(address, textaccess, pte); + +no_pte: + + up_read(&mm->mmap_sem); + return; + +/* + * Something tried to access memory that isn't in our memory map.. + * Fix it, but check if it's kernel or user first.. + */ +bad_area: +#ifdef DEBUG_FAULT + printk("fault:bad area\n"); +#endif + up_read(&mm->mmap_sem); + + if (user_mode(regs)) { + static int count=0; + siginfo_t info; + if (count < 4) { + /* This is really to help debug faults when starting + * usermode, so only need a few */ + count++; + printk("user mode bad_area address=%08lx pid=%d (%s) pc=%08lx\n", + address, task_pid_nr(current), current->comm, + (unsigned long) regs->pc); +#if 0 + show_regs(regs); +#endif + } + if (is_global_init(tsk)) { + panic("INIT had user mode bad_area\n"); + } + tsk->thread.address = address; + tsk->thread.error_code = writeaccess; + info.si_signo = SIGSEGV; + info.si_errno = 0; + info.si_addr = (void *) address; + force_sig_info(SIGSEGV, &info, tsk); + return; + } + +no_context: +#ifdef DEBUG_FAULT + printk("fault:No context\n"); +#endif + /* Are we prepared to handle this kernel fault? */ + fixup = search_exception_tables(regs->pc); + if (fixup) { + regs->pc = fixup->fixup; + return; + } + +/* + * Oops. The kernel tried to access some bad page. We'll have to + * terminate things with extreme prejudice. + * + */ + if (address < PAGE_SIZE) + printk(KERN_ALERT "Unable to handle kernel NULL pointer dereference"); + else + printk(KERN_ALERT "Unable to handle kernel paging request"); + printk(" at virtual address %08lx\n", address); + printk(KERN_ALERT "pc = %08Lx%08Lx\n", regs->pc >> 32, regs->pc & 0xffffffff); + die("Oops", regs, writeaccess); + do_exit(SIGKILL); + +/* + * We ran out of memory, or some other thing happened to us that made + * us unable to handle the page fault gracefully. + */ +out_of_memory: + if (is_global_init(current)) { + panic("INIT out of memory\n"); + yield(); + goto survive; + } + printk("fault:Out of memory\n"); + up_read(&mm->mmap_sem); + if (is_global_init(current)) { + yield(); + down_read(&mm->mmap_sem); + goto survive; + } + printk("VM: killing process %s\n", tsk->comm); + if (user_mode(regs)) + do_group_exit(SIGKILL); + goto no_context; + +do_sigbus: + printk("fault:Do sigbus\n"); + up_read(&mm->mmap_sem); + + /* + * Send a sigbus, regardless of whether we were in kernel + * or user mode. + */ + tsk->thread.address = address; + tsk->thread.error_code = writeaccess; + tsk->thread.trap_no = 14; + force_sig(SIGBUS, tsk); + + /* Kernel mode? Handle exceptions or die */ + if (!user_mode(regs)) + goto no_context; +} + +void update_mmu_cache(struct vm_area_struct * vma, + unsigned long address, pte_t pte) +{ + /* + * This appears to get called once for every pte entry that gets + * established => I don't think it's efficient to try refilling the + * TLBs with the pages - some may not get accessed even. Also, for + * executable pages, it is impossible to determine reliably here which + * TLB they should be mapped into (or both even). + * + * So, just do nothing here and handle faults on demand. In the + * TLBMISS handling case, the refill is now done anyway after the pte + * has been fixed up, so that deals with most useful cases. + */ +} + +void local_flush_tlb_one(unsigned long asid, unsigned long page) +{ + unsigned long long match, pteh=0, lpage; + unsigned long tlb; + + /* + * Sign-extend based on neff. + */ + lpage = (page & NEFF_SIGN) ? (page | NEFF_MASK) : page; + match = (asid << PTEH_ASID_SHIFT) | PTEH_VALID; + match |= lpage; + + for_each_itlb_entry(tlb) { + asm volatile ("getcfg %1, 0, %0" + : "=r" (pteh) + : "r" (tlb) ); + + if (pteh == match) { + __flush_tlb_slot(tlb); + break; + } + } + + for_each_dtlb_entry(tlb) { + asm volatile ("getcfg %1, 0, %0" + : "=r" (pteh) + : "r" (tlb) ); + + if (pteh == match) { + __flush_tlb_slot(tlb); + break; + } + + } +} + +void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long page) +{ + unsigned long flags; + + if (vma->vm_mm) { + page &= PAGE_MASK; + local_irq_save(flags); + local_flush_tlb_one(get_asid(), page); + local_irq_restore(flags); + } +} + +void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start, + unsigned long end) +{ + unsigned long flags; + unsigned long long match, pteh=0, pteh_epn, pteh_low; + unsigned long tlb; + unsigned int cpu = smp_processor_id(); + struct mm_struct *mm; + + mm = vma->vm_mm; + if (cpu_context(cpu, mm) == NO_CONTEXT) + return; + + local_irq_save(flags); + + start &= PAGE_MASK; + end &= PAGE_MASK; + + match = (cpu_asid(cpu, mm) << PTEH_ASID_SHIFT) | PTEH_VALID; + + /* Flush ITLB */ + for_each_itlb_entry(tlb) { + asm volatile ("getcfg %1, 0, %0" + : "=r" (pteh) + : "r" (tlb) ); + + pteh_epn = pteh & PAGE_MASK; + pteh_low = pteh & ~PAGE_MASK; + + if (pteh_low == match && pteh_epn >= start && pteh_epn <= end) + __flush_tlb_slot(tlb); + } + + /* Flush DTLB */ + for_each_dtlb_entry(tlb) { + asm volatile ("getcfg %1, 0, %0" + : "=r" (pteh) + : "r" (tlb) ); + + pteh_epn = pteh & PAGE_MASK; + pteh_low = pteh & ~PAGE_MASK; + + if (pteh_low == match && pteh_epn >= start && pteh_epn <= end) + __flush_tlb_slot(tlb); + } + + local_irq_restore(flags); +} + +void local_flush_tlb_mm(struct mm_struct *mm) +{ + unsigned long flags; + unsigned int cpu = smp_processor_id(); + + if (cpu_context(cpu, mm) == NO_CONTEXT) + return; + + local_irq_save(flags); + + cpu_context(cpu, mm) = NO_CONTEXT; + if (mm == current->mm) + activate_context(mm, cpu); + + local_irq_restore(flags); +} + +void local_flush_tlb_all(void) +{ + /* Invalidate all, including shared pages, excluding fixed TLBs */ + unsigned long flags, tlb; + + local_irq_save(flags); + + /* Flush each ITLB entry */ + for_each_itlb_entry(tlb) + __flush_tlb_slot(tlb); + + /* Flush each DTLB entry */ + for_each_dtlb_entry(tlb) + __flush_tlb_slot(tlb); + + local_irq_restore(flags); +} + +void local_flush_tlb_kernel_range(unsigned long start, unsigned long end) +{ + /* FIXME: Optimize this later.. */ + flush_tlb_all(); +} diff --git a/arch/sh/tools/mach-types b/arch/sh/tools/mach-types index ff071693325c..25810670a0fa 100644 --- a/arch/sh/tools/mach-types +++ b/arch/sh/tools/mach-types @@ -29,7 +29,6 @@ HP6XX SH_HP6XX DREAMCAST SH_DREAMCAST MPC1211 SH_MPC1211 SNAPGEAR SH_SECUREEDGE5410 -HS7751RVOIP SH_HS7751RVOIP EDOSK7705 SH_EDOSK7705 SH4202_MICRODEV SH_SH4202_MICRODEV SH03 SH_SH03 @@ -45,3 +44,4 @@ X3PROTO SH_X3PROTO MAGICPANELR2 SH_MAGIC_PANEL_R2 R2D_PLUS RTS7751R2D_PLUS R2D_1 RTS7751R2D_1 +CAYMAN SH_CAYMAN |
