diff options
Diffstat (limited to 'arch/sh')
467 files changed, 27354 insertions, 4947 deletions
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 9a854c8e5274..5131d50f851a 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -8,8 +8,10 @@ mainmenu "Linux/SuperH Kernel Configuration" config SUPERH def_bool y select EMBEDDED + select HAVE_CLK select HAVE_IDE select HAVE_OPROFILE + select HAVE_GENERIC_DMA_COHERENT help The SuperH is a RISC processor targeted for use in embedded systems and consumer electronics; it was also used in the Sega Dreamcast @@ -22,6 +24,11 @@ config SUPERH32 config SUPERH64 def_bool y if CPU_SH5 +config ARCH_DEFCONFIG + string + default "arch/sh/configs/shx3_defconfig" if SUPERH32 + default "arch/sh/configs/cayman_defconfig" if SUPERH64 + config RWSEM_GENERIC_SPINLOCK def_bool y @@ -41,6 +48,9 @@ config GENERIC_HWEIGHT config GENERIC_HARDIRQS def_bool y +config GENERIC_HARDIRQS_NO__DO_IRQ + def_bool y + config GENERIC_IRQ_PROBE def_bool y @@ -56,6 +66,10 @@ config GENERIC_TIME config GENERIC_CLOCKEVENTS def_bool n +config GENERIC_LOCKBREAK + def_bool y + depends on SMP && PREEMPT + config SYS_SUPPORTS_PM bool @@ -87,9 +101,6 @@ config ARCH_HAS_ILOG2_U64 config ARCH_NO_VIRT_TO_BUS def_bool y -config ARCH_SUPPORTS_AOUT - def_bool y - config IO_TRAPPED bool @@ -346,219 +357,10 @@ config CPU_SUBTYPE_SH5_103 endchoice source "arch/sh/mm/Kconfig" + source "arch/sh/Kconfig.cpu" -menu "Board support" - -config SOLUTION_ENGINE - bool - -config SH_SOLUTION_ENGINE - bool "SolutionEngine" - select SOLUTION_ENGINE - select CPU_HAS_IPR_IRQ - depends on CPU_SUBTYPE_SH7705 || CPU_SUBTYPE_SH7709 || CPU_SUBTYPE_SH7710 || \ - CPU_SUBTYPE_SH7712 || CPU_SUBTYPE_SH7750 || CPU_SUBTYPE_SH7750S || \ - CPU_SUBTYPE_SH7750R - help - Select SolutionEngine if configuring for a Hitachi SH7705, SH7709, - SH7710, SH7712, SH7750, SH7750S or SH7750R evaluation board. - -config SH_7206_SOLUTION_ENGINE - bool "SolutionEngine7206" - select SOLUTION_ENGINE - depends on CPU_SUBTYPE_SH7206 - help - Select 7206 SolutionEngine if configuring for a Hitachi SH7206 - evaluation board. - -config SH_7619_SOLUTION_ENGINE - bool "SolutionEngine7619" - select SOLUTION_ENGINE - depends on CPU_SUBTYPE_SH7619 - help - Select 7619 SolutionEngine if configuring for a Hitachi SH7619 - evaluation board. - -config SH_7721_SOLUTION_ENGINE - bool "SolutionEngine7721" - select SOLUTION_ENGINE - depends on CPU_SUBTYPE_SH7721 - help - Select 7721 SolutionEngine if configuring for a Hitachi SH7721 - evaluation board. - -config SH_7722_SOLUTION_ENGINE - bool "SolutionEngine7722" - select SOLUTION_ENGINE - depends on CPU_SUBTYPE_SH7722 - help - Select 7722 SolutionEngine if configuring for a Hitachi SH772 - evaluation board. - -config SH_7751_SOLUTION_ENGINE - bool "SolutionEngine7751" - select SOLUTION_ENGINE - select CPU_HAS_IPR_IRQ - depends on CPU_SUBTYPE_SH7751 - help - Select 7751 SolutionEngine if configuring for a Hitachi SH7751 - evaluation board. - -config SH_7780_SOLUTION_ENGINE - bool "SolutionEngine7780" - select SOLUTION_ENGINE - select SYS_SUPPORTS_PCI - depends on CPU_SUBTYPE_SH7780 - help - Select 7780 SolutionEngine if configuring for a Renesas SH7780 - evaluation board. - -config SH_7343_SOLUTION_ENGINE - bool "SolutionEngine7343" - select SOLUTION_ENGINE - depends on CPU_SUBTYPE_SH7343 - help - Select 7343 SolutionEngine if configuring for a Hitachi - SH7343 (SH-Mobile 3AS) evaluation board. - -config SH_7751_SYSTEMH - bool "SystemH7751R" - depends on CPU_SUBTYPE_SH7751R - help - Select SystemH if you are configuring for a Renesas SystemH - 7751R evaluation board. - -config SH_HP6XX - bool "HP6XX" - select SYS_SUPPORTS_APM_EMULATION - select HD6446X_SERIES - depends on CPU_SUBTYPE_SH7709 - help - Select HP6XX if configuring for a HP jornada HP6xx. - More information (hardware only) at - <http://www.hp.com/jornada/>. - -config SH_DREAMCAST - bool "Dreamcast" - select SYS_SUPPORTS_PCI - depends on CPU_SUBTYPE_SH7091 - help - Select Dreamcast if configuring for a SEGA Dreamcast. - More information at <http://www.linux-sh.org> - -config SH_SH03 - bool "Interface CTP/PCI-SH03" - depends on CPU_SUBTYPE_SH7751 - select CPU_HAS_IPR_IRQ - select SYS_SUPPORTS_PCI - help - CTP/PCI-SH03 is a CPU module computer that is produced - by Interface Corporation. - More information at <http://www.interface.co.jp> - -config SH_SECUREEDGE5410 - bool "SecureEdge5410" - depends on CPU_SUBTYPE_SH7751R - select CPU_HAS_IPR_IRQ - select SYS_SUPPORTS_PCI - help - Select SecureEdge5410 if configuring for a SnapGear SH board. - This includes both the OEM SecureEdge products as well as the - SME product line. - -config SH_RTS7751R2D - bool "RTS7751R2D" - depends on CPU_SUBTYPE_SH7751R - select SYS_SUPPORTS_PCI - select IO_TRAPPED - help - Select RTS7751R2D if configuring for a Renesas Technology - Sales SH-Graphics board. - -config SH_SDK7780 - bool "SDK7780R3" - depends on CPU_SUBTYPE_SH7780 - select SYS_SUPPORTS_PCI - help - Select SDK7780 if configuring for a Renesas SH7780 SDK7780R3 - evaluation board. - -config SH_HIGHLANDER - bool "Highlander" - depends on CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785 - select SYS_SUPPORTS_PCI - select IO_TRAPPED - -config SH_MIGOR - bool "Migo-R" - depends on CPU_SUBTYPE_SH7722 - help - Select Migo-R if configuring for the SH7722 Migo-R platform - by Renesas System Solutions Asia Pte. Ltd. - -config SH_EDOSK7705 - bool "EDOSK7705" - depends on CPU_SUBTYPE_SH7705 - -config SH_SH4202_MICRODEV - bool "SH4-202 MicroDev" - depends on CPU_SUBTYPE_SH4_202 - help - Select SH4-202 MicroDev if configuring for a SuperH MicroDev board - with an SH4-202 CPU. - -config SH_LANDISK - bool "LANDISK" - depends on CPU_SUBTYPE_SH7751R - select SYS_SUPPORTS_PCI - help - I-O DATA DEVICE, INC. "LANDISK Series" support. - -config SH_TITAN - bool "TITAN" - depends on CPU_SUBTYPE_SH7751R - select CPU_HAS_IPR_IRQ - select SYS_SUPPORTS_PCI - help - Select Titan if you are configuring for a Nimble Microsystems - NetEngine NP51R. - -config SH_SHMIN - bool "SHMIN" - depends on CPU_SUBTYPE_SH7706 - select CPU_HAS_IPR_IRQ - help - Select SHMIN if configuring for the SHMIN board. - -config SH_LBOX_RE2 - bool "L-BOX RE2" - depends on CPU_SUBTYPE_SH7751R - select SYS_SUPPORTS_PCI - help - Select L-BOX RE2 if configuring for the NTT COMWARE L-BOX RE2. - -config SH_X3PROTO - bool "SH-X3 Prototype board" - depends on CPU_SUBTYPE_SHX3 - -config SH_MAGIC_PANEL_R2 - bool "Magic Panel R2" - depends on CPU_SUBTYPE_SH7720 - help - Select Magic Panel R2 if configuring for Magic Panel R2. - -config SH_CAYMAN - bool "Hitachi Cayman" - depends on CPU_SUBTYPE_SH5_101 || CPU_SUBTYPE_SH5_103 - select SYS_SUPPORTS_PCI - -endmenu - -source "arch/sh/boards/renesas/rts7751r2d/Kconfig" -source "arch/sh/boards/renesas/r7780rp/Kconfig" -source "arch/sh/boards/renesas/sdk7780/Kconfig" -source "arch/sh/boards/magicpanelr2/Kconfig" +source "arch/sh/boards/Kconfig" menu "Timer and clock configuration" @@ -685,9 +487,27 @@ config CRASH_DUMP For more details see Documentation/kdump/kdump.txt +config SECCOMP + bool "Enable seccomp to safely compute untrusted bytecode" + depends on PROC_FS + default y + help + This kernel feature is useful for number crunching applications + that may need to compute untrusted bytecode during their + execution. By using pipes or other transports made available to + the process as file descriptors supporting the read/write + syscalls, it's possible to isolate those applications in + their own address space using seccomp. Once seccomp is + enabled via prctl, it cannot be disabled and the task is only + allowed to execute a few safe syscalls defined by each seccomp + mode. + + If unsure, say N. + config SMP bool "Symmetric multi-processing support" depends on SYS_SUPPORTS_SMP + select USE_GENERIC_SMP_HELPERS ---help--- This enables support for systems with more than one CPU. If you have a system with only one CPU, like most personal computers, say N. If diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug index 0f4549860226..4d2d102e00d5 100644 --- a/arch/sh/Kconfig.debug +++ b/arch/sh/Kconfig.debug @@ -36,7 +36,8 @@ config EARLY_SCIF_CONSOLE_PORT default "0xff804000" if CPU_SUBTYPE_MXG default "0xffc30000" if CPU_SUBTYPE_SHX3 default "0xffe00000" if CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7763 || \ - CPU_SUBTYPE_SH7722 || CPU_SUBTYPE_SH7366 + CPU_SUBTYPE_SH7722 || CPU_SUBTYPE_SH7366 || \ + CPU_SUBTYPE_SH7343 default "0xffe80000" if CPU_SH4 default "0xffea0000" if CPU_SUBTYPE_SH7785 default "0xfffe8000" if CPU_SUBTYPE_SH7203 @@ -181,7 +182,7 @@ if SUPERH64 config SH64_PROC_ASIDS bool "Debug: report ASIDs through /proc/asids" - depends on PROC_FS + depends on PROC_FS && MMU config SH64_SR_WATCH bool "Debug: set SR.WATCH to enable hardware watchpoints and trace" diff --git a/arch/sh/Makefile b/arch/sh/Makefile index fb7b1b15e392..01d85c74481d 100644 --- a/arch/sh/Makefile +++ b/arch/sh/Makefile @@ -68,7 +68,7 @@ OBJCOPYFLAGS := -O binary -R .note -R .note.gnu.build-id -R .comment \ defaultimage-$(CONFIG_SUPERH32) := zImage # Set some sensible Kbuild defaults -KBUILD_DEFCONFIG := r7780mp_defconfig +KBUILD_DEFCONFIG := shx3_defconfig KBUILD_IMAGE := $(defaultimage-y) # @@ -91,47 +91,32 @@ LDFLAGS_vmlinux += --defsym 'jiffies=jiffies_64+4' LDFLAGS += -EB endif -KBUILD_CFLAGS += -pipe $(cflags-y) -KBUILD_AFLAGS += $(cflags-y) - head-y := arch/sh/kernel/init_task.o head-$(CONFIG_SUPERH32) += arch/sh/kernel/head_32.o head-$(CONFIG_SUPERH64) += arch/sh/kernel/head_64.o -LIBGCC := $(shell $(CC) $(KBUILD_CFLAGS) -print-libgcc-file-name) - -core-y += arch/sh/kernel/ arch/sh/mm/ +core-y += arch/sh/kernel/ arch/sh/mm/ arch/sh/boards/ core-$(CONFIG_SH_FPU_EMU) += arch/sh/math-emu/ -# Boards -machdir-$(CONFIG_SH_SOLUTION_ENGINE) += se/770x -machdir-$(CONFIG_SH_7722_SOLUTION_ENGINE) += se/7722 -machdir-$(CONFIG_SH_7751_SOLUTION_ENGINE) += se/7751 -machdir-$(CONFIG_SH_7780_SOLUTION_ENGINE) += se/7780 -machdir-$(CONFIG_SH_7343_SOLUTION_ENGINE) += se/7343 -machdir-$(CONFIG_SH_7721_SOLUTION_ENGINE) += se/7721 -machdir-$(CONFIG_SH_HP6XX) += hp6xx -machdir-$(CONFIG_SH_DREAMCAST) += dreamcast -machdir-$(CONFIG_SH_SH03) += sh03 -machdir-$(CONFIG_SH_SECUREEDGE5410) += snapgear -machdir-$(CONFIG_SH_RTS7751R2D) += renesas/rts7751r2d -machdir-$(CONFIG_SH_7751_SYSTEMH) += renesas/systemh -machdir-$(CONFIG_SH_EDOSK7705) += renesas/edosk7705 -machdir-$(CONFIG_SH_HIGHLANDER) += renesas/r7780rp -machdir-$(CONFIG_SH_MIGOR) += renesas/migor -machdir-$(CONFIG_SH_SDK7780) += renesas/sdk7780 -machdir-$(CONFIG_SH_X3PROTO) += renesas/x3proto -machdir-$(CONFIG_SH_SH4202_MICRODEV) += superh/microdev -machdir-$(CONFIG_SH_LANDISK) += landisk -machdir-$(CONFIG_SH_TITAN) += titan -machdir-$(CONFIG_SH_SHMIN) += shmin -machdir-$(CONFIG_SH_7206_SOLUTION_ENGINE) += se/7206 -machdir-$(CONFIG_SH_7619_SOLUTION_ENGINE) += se/7619 -machdir-$(CONFIG_SH_LBOX_RE2) += lboxre2 -machdir-$(CONFIG_SH_MAGIC_PANEL_R2) += magicpanelr2 -machdir-$(CONFIG_SH_CAYMAN) += cayman - -incdir-y := $(notdir $(machdir-y)) +# Mach groups +machdir-$(CONFIG_SOLUTION_ENGINE) += mach-se +machdir-$(CONFIG_SH_HP6XX) += mach-hp6xx +machdir-$(CONFIG_SH_DREAMCAST) += mach-dreamcast +machdir-$(CONFIG_SH_SH03) += mach-sh03 +machdir-$(CONFIG_SH_SECUREEDGE5410) += mach-snapgear +machdir-$(CONFIG_SH_RTS7751R2D) += mach-r2d +machdir-$(CONFIG_SH_7751_SYSTEMH) += mach-systemh +machdir-$(CONFIG_SH_EDOSK7705) += mach-edosk7705 +machdir-$(CONFIG_SH_HIGHLANDER) += mach-highlander +machdir-$(CONFIG_SH_MIGOR) += mach-migor +machdir-$(CONFIG_SH_SDK7780) += mach-sdk7780 +machdir-$(CONFIG_SH_X3PROTO) += mach-x3proto +machdir-$(CONFIG_SH_SH7763RDP) += mach-sh7763rdp +machdir-$(CONFIG_SH_SH4202_MICRODEV) += mach-microdev +machdir-$(CONFIG_SH_LANDISK) += mach-landisk +machdir-$(CONFIG_SH_TITAN) += mach-titan +machdir-$(CONFIG_SH_LBOX_RE2) += mach-lboxre2 +machdir-$(CONFIG_SH_CAYMAN) += mach-cayman ifneq ($(machdir-y),) core-y += $(addprefix arch/sh/boards/, \ @@ -141,67 +126,40 @@ endif # Companion chips core-$(CONFIG_HD6446X_SERIES) += arch/sh/cchips/hd6446x/ -cpuincdir-$(CONFIG_CPU_SH2) := cpu-sh2 -cpuincdir-$(CONFIG_CPU_SH2A) := cpu-sh2a -cpuincdir-$(CONFIG_CPU_SH3) := cpu-sh3 -cpuincdir-$(CONFIG_CPU_SH4) := cpu-sh4 -cpuincdir-$(CONFIG_CPU_SH5) := cpu-sh5 - -libs-$(CONFIG_SUPERH32) := arch/sh/lib/ $(libs-y) -libs-$(CONFIG_SUPERH64) := arch/sh/lib64/ $(libs-y) -libs-y += $(LIBGCC) +# +# CPU header paths +# +# These are ordered by optimization level. A CPU family that is a subset +# of another (ie, SH-2A / SH-2), is picked up first, with increasing +# levels of genericness if nothing more suitable is situated in the +# hierarchy. +# +# As an example, in order of preference, SH-2A > SH-2 > common definitions. +# +cpuincdir-$(CONFIG_CPU_SH2A) += cpu-sh2a +cpuincdir-$(CONFIG_CPU_SH2) += cpu-sh2 +cpuincdir-$(CONFIG_CPU_SH3) += cpu-sh3 +cpuincdir-$(CONFIG_CPU_SH4) += cpu-sh4 +cpuincdir-$(CONFIG_CPU_SH5) += cpu-sh5 +cpuincdir-y += cpu-common # Must be last drivers-y += arch/sh/drivers/ drivers-$(CONFIG_OPROFILE) += arch/sh/oprofile/ boot := arch/sh/boot -ifneq ($(KBUILD_SRC),) -incdir-prefix := $(srctree)/include/asm-sh/ -else -incdir-prefix := -endif +cflags-y += $(foreach d, $(cpuincdir-y), -Iarch/sh/include/$(d)) \ + $(foreach d, $(machdir-y), -Iarch/sh/include/$(d)) -# Update machine arch and proc symlinks if something which affects -# them changed. We use .arch and .mach to indicate when they were -# updated last, otherwise make uses the target directory mtime. +KBUILD_CFLAGS += -pipe $(cflags-y) +KBUILD_CPPFLAGS += $(cflags-y) +KBUILD_AFLAGS += $(cflags-y) -include/asm-sh/.cpu: $(wildcard include/config/cpu/*.h) \ - include/config/auto.conf FORCE - @echo ' SYMLINK include/asm-sh/cpu -> include/asm-sh/$(cpuincdir-y)' - $(Q)if [ ! -d include/asm-sh ]; then mkdir -p include/asm-sh; fi - $(Q)ln -fsn $(incdir-prefix)$(cpuincdir-y) include/asm-sh/cpu - @touch $@ +LIBGCC := $(shell $(CC) $(KBUILD_CFLAGS) -print-libgcc-file-name) -# Most boards have their own mach directories. For the ones that -# don't, just reference the parent directory so the semantics are -# kept roughly the same. -# -# When multiple boards are compiled in at the same time, preference -# for the mach link is given to whichever has a directory for its -# headers. However, this is only a workaround until platforms that -# can live in the same kernel image back away from relying on the -# mach link. - -include/asm-sh/.mach: $(wildcard include/config/sh/*.h) \ - include/config/auto.conf FORCE - $(Q)if [ ! -d include/asm-sh ]; then mkdir -p include/asm-sh; fi - $(Q)rm -f include/asm-sh/mach - $(Q)for i in $(incdir-y); do \ - if [ -d $(srctree)/include/asm-sh/$$i ]; then \ - echo -n ' SYMLINK include/asm-sh/mach -> '; \ - echo -e "include/asm-sh/$$i"; \ - ln -fsn $(incdir-prefix)$$i \ - include/asm-sh/mach; \ - else \ - if [ ! -d include/asm-sh/mach ]; then \ - echo -n ' SYMLINK include/asm-sh/mach -> '; \ - echo -e 'include/asm-sh'; \ - ln -fsn $(incdir-prefix)../asm-sh include/asm-sh/mach; \ - fi; \ - fi; \ - done - @touch $@ +libs-$(CONFIG_SUPERH32) := arch/sh/lib/ $(libs-y) +libs-$(CONFIG_SUPERH64) := arch/sh/lib64/ $(libs-y) +libs-y += $(LIBGCC) PHONY += maketools FORCE @@ -215,8 +173,7 @@ zImage uImage uImage.srec vmlinux.srec: vmlinux compressed: zImage -archprepare: include/asm-sh/.cpu include/asm-sh/.mach maketools \ - arch/sh/lib64/syscalltab.h +archprepare: maketools arch/sh/lib64/syscalltab.h archclean: $(Q)$(MAKE) $(clean)=$(boot) @@ -258,6 +215,4 @@ arch/sh/lib64/syscalltab.h: arch/sh/kernel/syscalls_64.S $(call filechk,gen-syscalltab) CLEAN_FILES += arch/sh/lib64/syscalltab.h \ - include/asm-sh/machtypes.h \ - include/asm-sh/cpu include/asm-sh/.cpu \ - include/asm-sh/mach include/asm-sh/.mach + include/asm-sh/machtypes.h diff --git a/arch/sh/boards/Kconfig b/arch/sh/boards/Kconfig new file mode 100644 index 000000000000..ae194869fd60 --- /dev/null +++ b/arch/sh/boards/Kconfig @@ -0,0 +1,258 @@ +menu "Board support" + +config SOLUTION_ENGINE + bool + +config SH_SOLUTION_ENGINE + bool "SolutionEngine" + select SOLUTION_ENGINE + select CPU_HAS_IPR_IRQ + depends on CPU_SUBTYPE_SH7705 || CPU_SUBTYPE_SH7709 || CPU_SUBTYPE_SH7710 || \ + CPU_SUBTYPE_SH7712 || CPU_SUBTYPE_SH7750 || CPU_SUBTYPE_SH7750S || \ + CPU_SUBTYPE_SH7750R + help + Select SolutionEngine if configuring for a Hitachi SH7705, SH7709, + SH7710, SH7712, SH7750, SH7750S or SH7750R evaluation board. + +config SH_7206_SOLUTION_ENGINE + bool "SolutionEngine7206" + select SOLUTION_ENGINE + depends on CPU_SUBTYPE_SH7206 + help + Select 7206 SolutionEngine if configuring for a Hitachi SH7206 + evaluation board. + +config SH_7619_SOLUTION_ENGINE + bool "SolutionEngine7619" + select SOLUTION_ENGINE + depends on CPU_SUBTYPE_SH7619 + help + Select 7619 SolutionEngine if configuring for a Hitachi SH7619 + evaluation board. + +config SH_7721_SOLUTION_ENGINE + bool "SolutionEngine7721" + select SOLUTION_ENGINE + depends on CPU_SUBTYPE_SH7721 + help + Select 7721 SolutionEngine if configuring for a Hitachi SH7721 + evaluation board. + +config SH_7722_SOLUTION_ENGINE + bool "SolutionEngine7722" + select SOLUTION_ENGINE + depends on CPU_SUBTYPE_SH7722 + help + Select 7722 SolutionEngine if configuring for a Hitachi SH772 + evaluation board. + +config SH_7751_SOLUTION_ENGINE + bool "SolutionEngine7751" + select SOLUTION_ENGINE + select CPU_HAS_IPR_IRQ + depends on CPU_SUBTYPE_SH7751 + help + Select 7751 SolutionEngine if configuring for a Hitachi SH7751 + evaluation board. + +config SH_7780_SOLUTION_ENGINE + bool "SolutionEngine7780" + select SOLUTION_ENGINE + select SYS_SUPPORTS_PCI + depends on CPU_SUBTYPE_SH7780 + help + Select 7780 SolutionEngine if configuring for a Renesas SH7780 + evaluation board. + +config SH_7343_SOLUTION_ENGINE + bool "SolutionEngine7343" + select SOLUTION_ENGINE + depends on CPU_SUBTYPE_SH7343 + help + Select 7343 SolutionEngine if configuring for a Hitachi + SH7343 (SH-Mobile 3AS) evaluation board. + +config SH_7751_SYSTEMH + bool "SystemH7751R" + depends on CPU_SUBTYPE_SH7751R + help + Select SystemH if you are configuring for a Renesas SystemH + 7751R evaluation board. + +config SH_HP6XX + bool "HP6XX" + select SYS_SUPPORTS_APM_EMULATION + select HD6446X_SERIES + depends on CPU_SUBTYPE_SH7709 + help + Select HP6XX if configuring for a HP jornada HP6xx. + More information (hardware only) at + <http://www.hp.com/jornada/>. + +config SH_DREAMCAST + bool "Dreamcast" + select SYS_SUPPORTS_PCI + depends on CPU_SUBTYPE_SH7091 + help + Select Dreamcast if configuring for a SEGA Dreamcast. + More information at <http://www.linux-sh.org> + +config SH_SH03 + bool "Interface CTP/PCI-SH03" + depends on CPU_SUBTYPE_SH7751 + select CPU_HAS_IPR_IRQ + select SYS_SUPPORTS_PCI + help + CTP/PCI-SH03 is a CPU module computer that is produced + by Interface Corporation. + More information at <http://www.interface.co.jp> + +config SH_SECUREEDGE5410 + bool "SecureEdge5410" + depends on CPU_SUBTYPE_SH7751R + select CPU_HAS_IPR_IRQ + select SYS_SUPPORTS_PCI + help + Select SecureEdge5410 if configuring for a SnapGear SH board. + This includes both the OEM SecureEdge products as well as the + SME product line. + +config SH_RTS7751R2D + bool "RTS7751R2D" + depends on CPU_SUBTYPE_SH7751R + select SYS_SUPPORTS_PCI + select IO_TRAPPED + help + Select RTS7751R2D if configuring for a Renesas Technology + Sales SH-Graphics board. + +config SH_RSK7203 + bool "RSK7203" + depends on CPU_SUBTYPE_SH7203 + +config SH_SDK7780 + bool "SDK7780R3" + depends on CPU_SUBTYPE_SH7780 + select SYS_SUPPORTS_PCI + help + Select SDK7780 if configuring for a Renesas SH7780 SDK7780R3 + evaluation board. + +config SH_HIGHLANDER + bool "Highlander" + depends on CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785 + select SYS_SUPPORTS_PCI + select IO_TRAPPED + +config SH_SH7785LCR + bool "SH7785LCR" + depends on CPU_SUBTYPE_SH7785 + select SYS_SUPPORTS_PCI + select IO_TRAPPED + +config SH_SH7785LCR_29BIT_PHYSMAPS + bool "SH7785LCR 29bit physmaps" + depends on SH_SH7785LCR + default y + help + This board has 2 physical memory maps. It can be changed with + DIP switch(S2-5). If you set the DIP switch for S2-5 = ON, + you can access all on-board device in 29bit address mode. + +config SH_MIGOR + bool "Migo-R" + depends on CPU_SUBTYPE_SH7722 + help + Select Migo-R if configuring for the SH7722 Migo-R platform + by Renesas System Solutions Asia Pte. Ltd. + +config SH_AP325RXA + bool "AP-325RXA" + depends on CPU_SUBTYPE_SH7723 + help + Renesas "AP-325RXA" support. + Compatible with ALGO SYSTEM CO.,LTD. "AP-320A" + +config SH_SH7763RDP + bool "SH7763RDP" + depends on CPU_SUBTYPE_SH7763 + help + Select SH7763RDP if configuring for a Renesas SH7763 + evaluation board. + +config SH_EDOSK7705 + bool "EDOSK7705" + depends on CPU_SUBTYPE_SH7705 + +config SH_SH4202_MICRODEV + bool "SH4-202 MicroDev" + depends on CPU_SUBTYPE_SH4_202 + help + Select SH4-202 MicroDev if configuring for a SuperH MicroDev board + with an SH4-202 CPU. + +config SH_LANDISK + bool "LANDISK" + depends on CPU_SUBTYPE_SH7751R + select SYS_SUPPORTS_PCI + help + I-O DATA DEVICE, INC. "LANDISK Series" support. + +config SH_TITAN + bool "TITAN" + depends on CPU_SUBTYPE_SH7751R + select CPU_HAS_IPR_IRQ + select SYS_SUPPORTS_PCI + help + Select Titan if you are configuring for a Nimble Microsystems + NetEngine NP51R. + +config SH_SHMIN + bool "SHMIN" + depends on CPU_SUBTYPE_SH7706 + select CPU_HAS_IPR_IRQ + help + Select SHMIN if configuring for the SHMIN board. + +config SH_LBOX_RE2 + bool "L-BOX RE2" + depends on CPU_SUBTYPE_SH7751R + select SYS_SUPPORTS_PCI + help + Select L-BOX RE2 if configuring for the NTT COMWARE L-BOX RE2. + +config SH_X3PROTO + bool "SH-X3 Prototype board" + depends on CPU_SUBTYPE_SHX3 + +config SH_MAGIC_PANEL_R2 + bool "Magic Panel R2" + depends on CPU_SUBTYPE_SH7720 + help + Select Magic Panel R2 if configuring for Magic Panel R2. + +config SH_CAYMAN + bool "Hitachi Cayman" + depends on CPU_SUBTYPE_SH5_101 || CPU_SUBTYPE_SH5_103 + select SYS_SUPPORTS_PCI + +endmenu + +source "arch/sh/boards/mach-r2d/Kconfig" +source "arch/sh/boards/mach-highlander/Kconfig" +source "arch/sh/boards/mach-sdk7780/Kconfig" +source "arch/sh/boards/mach-migor/Kconfig" + +if SH_MAGIC_PANEL_R2 + +menu "Magic Panel R2 options" + +config SH_MAGIC_PANEL_R2_VERSION + int SH_MAGIC_PANEL_R2_VERSION + default "3" + help + Set the version of the Magic Panel R2 + +endmenu + +endif diff --git a/arch/sh/boards/Makefile b/arch/sh/boards/Makefile new file mode 100644 index 000000000000..463022c7df3c --- /dev/null +++ b/arch/sh/boards/Makefile @@ -0,0 +1,8 @@ +# +# Specific board support, not covered by a mach group. +# +obj-$(CONFIG_SH_AP325RXA) += board-ap325rxa.o +obj-$(CONFIG_SH_MAGIC_PANEL_R2) += board-magicpanelr2.o +obj-$(CONFIG_SH_RSK7203) += board-rsk7203.o +obj-$(CONFIG_SH_SH7785LCR) += board-sh7785lcr.o +obj-$(CONFIG_SH_SHMIN) += board-shmin.o diff --git a/arch/sh/boards/board-ap325rxa.c b/arch/sh/boards/board-ap325rxa.c new file mode 100644 index 000000000000..025d4fe55a58 --- /dev/null +++ b/arch/sh/boards/board-ap325rxa.c @@ -0,0 +1,316 @@ +/* + * Renesas - AP-325RXA + * (Compatible with Algo System ., LTD. - AP-320A) + * + * Copyright (C) 2008 Renesas Solutions Corp. + * Author : Yusuke Goda <goda.yuske@renesas.com> + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include <linux/init.h> +#include <linux/device.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/mtd/physmap.h> +#include <linux/delay.h> +#include <linux/i2c.h> +#include <linux/smc911x.h> +#include <media/soc_camera_platform.h> +#include <media/sh_mobile_ceu.h> +#include <asm/sh_mobile_lcdc.h> +#include <asm/io.h> +#include <asm/clock.h> + +static struct smc911x_platdata smc911x_info = { + .flags = SMC911X_USE_32BIT, + .irq_flags = IRQF_TRIGGER_LOW, +}; + +static struct resource smc9118_resources[] = { + [0] = { + .start = 0xb6080000, + .end = 0xb60fffff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 35, + .end = 35, + .flags = IORESOURCE_IRQ, + } +}; + +static struct platform_device smc9118_device = { + .name = "smc911x", + .id = -1, + .num_resources = ARRAY_SIZE(smc9118_resources), + .resource = smc9118_resources, + .dev = { + .platform_data = &smc911x_info, + }, +}; + +static struct mtd_partition ap325rxa_nor_flash_partitions[] = { + { + .name = "uboot", + .offset = 0, + .size = (1 * 1024 * 1024), + .mask_flags = MTD_WRITEABLE, /* Read-only */ + }, { + .name = "kernel", + .offset = MTDPART_OFS_APPEND, + .size = (2 * 1024 * 1024), + }, { + .name = "other", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct physmap_flash_data ap325rxa_nor_flash_data = { + .width = 2, + .parts = ap325rxa_nor_flash_partitions, + .nr_parts = ARRAY_SIZE(ap325rxa_nor_flash_partitions), +}; + +static struct resource ap325rxa_nor_flash_resources[] = { + [0] = { + .name = "NOR Flash", + .start = 0x00000000, + .end = 0x00ffffff, + .flags = IORESOURCE_MEM, + } +}; + +static struct platform_device ap325rxa_nor_flash_device = { + .name = "physmap-flash", + .resource = ap325rxa_nor_flash_resources, + .num_resources = ARRAY_SIZE(ap325rxa_nor_flash_resources), + .dev = { + .platform_data = &ap325rxa_nor_flash_data, + }, +}; + +#define FPGA_LCDREG 0xB4100180 +#define FPGA_BKLREG 0xB4100212 +#define FPGA_LCDREG_VAL 0x0018 +#define PORT_PHCR 0xA405010E +#define PORT_PLCR 0xA4050114 +#define PORT_PMCR 0xA4050116 +#define PORT_PRCR 0xA405011C +#define PORT_PSCR 0xA405011E +#define PORT_PZCR 0xA405014C +#define PORT_HIZCRA 0xA4050158 +#define PORT_MSELCRB 0xA4050182 +#define PORT_PSDR 0xA405013E +#define PORT_PZDR 0xA405016C +#define PORT_PSELD 0xA4050154 + +static void ap320_wvga_power_on(void *board_data) +{ + msleep(100); + + /* ASD AP-320/325 LCD ON */ + ctrl_outw(FPGA_LCDREG_VAL, FPGA_LCDREG); + + /* backlight */ + ctrl_outw((ctrl_inw(PORT_PSCR) & ~0x00C0) | 0x40, PORT_PSCR); + ctrl_outb(ctrl_inb(PORT_PSDR) & ~0x08, PORT_PSDR); + ctrl_outw(0x100, FPGA_BKLREG); +} + +static struct sh_mobile_lcdc_info lcdc_info = { + .clock_source = LCDC_CLK_EXTERNAL, + .ch[0] = { + .chan = LCDC_CHAN_MAINLCD, + .bpp = 16, + .interface_type = RGB18, + .clock_divider = 1, + .lcd_cfg = { + .name = "LB070WV1", + .xres = 800, + .yres = 480, + .left_margin = 40, + .right_margin = 160, + .hsync_len = 8, + .upper_margin = 63, + .lower_margin = 80, + .vsync_len = 1, + .sync = 0, /* hsync and vsync are active low */ + }, + .board_cfg = { + .display_on = ap320_wvga_power_on, + }, + } +}; + +static struct resource lcdc_resources[] = { + [0] = { + .name = "LCDC", + .start = 0xfe940000, /* P4-only space */ + .end = 0xfe941fff, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device lcdc_device = { + .name = "sh_mobile_lcdc_fb", + .num_resources = ARRAY_SIZE(lcdc_resources), + .resource = lcdc_resources, + .dev = { + .platform_data = &lcdc_info, + }, +}; + +#ifdef CONFIG_I2C +static unsigned char camera_ncm03j_magic[] = +{ + 0x87, 0x00, 0x88, 0x08, 0x89, 0x01, 0x8A, 0xE8, + 0x1D, 0x00, 0x1E, 0x8A, 0x21, 0x00, 0x33, 0x36, + 0x36, 0x60, 0x37, 0x08, 0x3B, 0x31, 0x44, 0x0F, + 0x46, 0xF0, 0x4B, 0x28, 0x4C, 0x21, 0x4D, 0x55, + 0x4E, 0x1B, 0x4F, 0xC7, 0x50, 0xFC, 0x51, 0x12, + 0x58, 0x02, 0x66, 0xC0, 0x67, 0x46, 0x6B, 0xA0, + 0x6C, 0x34, 0x7E, 0x25, 0x7F, 0x25, 0x8D, 0x0F, + 0x92, 0x40, 0x93, 0x04, 0x94, 0x26, 0x95, 0x0A, + 0x99, 0x03, 0x9A, 0xF0, 0x9B, 0x14, 0x9D, 0x7A, + 0xC5, 0x02, 0xD6, 0x07, 0x59, 0x00, 0x5A, 0x1A, + 0x5B, 0x2A, 0x5C, 0x37, 0x5D, 0x42, 0x5E, 0x56, + 0xC8, 0x00, 0xC9, 0x1A, 0xCA, 0x2A, 0xCB, 0x37, + 0xCC, 0x42, 0xCD, 0x56, 0xCE, 0x00, 0xCF, 0x1A, + 0xD0, 0x2A, 0xD1, 0x37, 0xD2, 0x42, 0xD3, 0x56, + 0x5F, 0x68, 0x60, 0x87, 0x61, 0xA3, 0x62, 0xBC, + 0x63, 0xD4, 0x64, 0xEA, 0xD6, 0x0F, +}; + +static int camera_set_capture(struct soc_camera_platform_info *info, + int enable) +{ + struct i2c_adapter *a = i2c_get_adapter(0); + struct i2c_msg msg; + int ret = 0; + int i; + + if (!enable) + return 0; /* no disable for now */ + + for (i = 0; i < ARRAY_SIZE(camera_ncm03j_magic); i += 2) { + u_int8_t buf[8]; + + msg.addr = 0x6e; + msg.buf = buf; + msg.len = 2; + msg.flags = 0; + + buf[0] = camera_ncm03j_magic[i]; + buf[1] = camera_ncm03j_magic[i + 1]; + + ret = (ret < 0) ? ret : i2c_transfer(a, &msg, 1); + } + + return ret; +} + +static struct soc_camera_platform_info camera_info = { + .iface = 0, + .format_name = "UYVY", + .format_depth = 16, + .format = { + .pixelformat = V4L2_PIX_FMT_UYVY, + .colorspace = V4L2_COLORSPACE_SMPTE170M, + .width = 640, + .height = 480, + }, + .bus_param = SOCAM_PCLK_SAMPLE_RISING | SOCAM_HSYNC_ACTIVE_HIGH | + SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_MASTER | SOCAM_DATAWIDTH_8, + .set_capture = camera_set_capture, +}; + +static struct platform_device camera_device = { + .name = "soc_camera_platform", + .dev = { + .platform_data = &camera_info, + }, +}; +#endif /* CONFIG_I2C */ + +static struct sh_mobile_ceu_info sh_mobile_ceu_info = { + .flags = SOCAM_PCLK_SAMPLE_RISING | SOCAM_HSYNC_ACTIVE_HIGH | + SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_MASTER | SOCAM_DATAWIDTH_8, +}; + +static struct resource ceu_resources[] = { + [0] = { + .name = "CEU", + .start = 0xfe910000, + .end = 0xfe91009f, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 52, + .flags = IORESOURCE_IRQ, + }, + [2] = { + /* place holder for contiguous memory */ + }, +}; + +static struct platform_device ceu_device = { + .name = "sh_mobile_ceu", + .num_resources = ARRAY_SIZE(ceu_resources), + .resource = ceu_resources, + .dev = { + .platform_data = &sh_mobile_ceu_info, + }, +}; + +static struct platform_device *ap325rxa_devices[] __initdata = { + &smc9118_device, + &ap325rxa_nor_flash_device, + &lcdc_device, + &ceu_device, +#ifdef CONFIG_I2C + &camera_device, +#endif +}; + +static struct i2c_board_info __initdata ap325rxa_i2c_devices[] = { +}; + +static int __init ap325rxa_devices_setup(void) +{ + clk_always_enable("mstp200"); /* LCDC */ + clk_always_enable("mstp203"); /* CEU */ + + platform_resource_setup_memory(&ceu_device, "ceu", 4 << 20); + + i2c_register_board_info(0, ap325rxa_i2c_devices, + ARRAY_SIZE(ap325rxa_i2c_devices)); + + return platform_add_devices(ap325rxa_devices, + ARRAY_SIZE(ap325rxa_devices)); +} +device_initcall(ap325rxa_devices_setup); + +static void __init ap325rxa_setup(char **cmdline_p) +{ + /* LCDC configuration */ + ctrl_outw(ctrl_inw(PORT_PHCR) & ~0xffff, PORT_PHCR); + ctrl_outw(ctrl_inw(PORT_PLCR) & ~0xffff, PORT_PLCR); + ctrl_outw(ctrl_inw(PORT_PMCR) & ~0xffff, PORT_PMCR); + ctrl_outw(ctrl_inw(PORT_PRCR) & ~0x03ff, PORT_PRCR); + ctrl_outw(ctrl_inw(PORT_HIZCRA) & ~0x01C0, PORT_HIZCRA); + + /* CEU */ + ctrl_outw(ctrl_inw(PORT_MSELCRB) & ~0x0001, PORT_MSELCRB); + ctrl_outw(ctrl_inw(PORT_PSELD) & ~0x0003, PORT_PSELD); + ctrl_outw((ctrl_inw(PORT_PZCR) & ~0xff00) | 0x5500, PORT_PZCR); + ctrl_outb((ctrl_inb(PORT_PZDR) & ~0xf0) | 0x20, PORT_PZDR); +} + +static struct sh_machine_vector mv_ap325rxa __initmv = { + .mv_name = "AP-325RXA", + .mv_setup = ap325rxa_setup, +}; diff --git a/arch/sh/boards/magicpanelr2/setup.c b/arch/sh/boards/board-magicpanelr2.c index f3b8b07ea5d6..f3b8b07ea5d6 100644 --- a/arch/sh/boards/magicpanelr2/setup.c +++ b/arch/sh/boards/board-magicpanelr2.c diff --git a/arch/sh/boards/board-rsk7203.c b/arch/sh/boards/board-rsk7203.c new file mode 100644 index 000000000000..ffbedc59a973 --- /dev/null +++ b/arch/sh/boards/board-rsk7203.c @@ -0,0 +1,136 @@ +/* + * Renesas Technology Europe RSK+ 7203 Support. + * + * Copyright (C) 2008 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/init.h> +#include <linux/types.h> +#include <linux/platform_device.h> +#include <linux/interrupt.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> +#include <linux/mtd/map.h> +#include <linux/smc911x.h> +#include <asm/machvec.h> +#include <asm/io.h> + +static struct smc911x_platdata smc911x_info = { + .flags = SMC911X_USE_16BIT, + .irq_flags = IRQF_TRIGGER_LOW, +}; + +static struct resource smc911x_resources[] = { + [0] = { + .start = 0x24000000, + .end = 0x24000000 + 0x100, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 64, + .end = 64, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device smc911x_device = { + .name = "smc911x", + .id = -1, + .num_resources = ARRAY_SIZE(smc911x_resources), + .resource = smc911x_resources, + .dev = { + .platform_data = &smc911x_info, + }, +}; + +static const char *probes[] = { "cmdlinepart", NULL }; + +static struct mtd_partition *parsed_partitions; + +static struct mtd_partition rsk7203_partitions[] = { + { + .name = "Bootloader", + .offset = 0x00000000, + .size = 0x00040000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "Kernel", + .offset = MTDPART_OFS_NXTBLK, + .size = 0x001c0000, + }, { + .name = "Flash_FS", + .offset = MTDPART_OFS_NXTBLK, + .size = MTDPART_SIZ_FULL, + } +}; + +static struct physmap_flash_data flash_data = { + .width = 2, +}; + +static struct resource flash_resource = { + .start = 0x20000000, + .end = 0x20400000, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device flash_device = { + .name = "physmap-flash", + .id = -1, + .resource = &flash_resource, + .num_resources = 1, + .dev = { + .platform_data = &flash_data, + }, +}; + +static struct mtd_info *flash_mtd; + +static struct map_info rsk7203_flash_map = { + .name = "RSK+ Flash", + .size = 0x400000, + .bankwidth = 2, +}; + +static void __init set_mtd_partitions(void) +{ + int nr_parts = 0; + + simple_map_init(&rsk7203_flash_map); + flash_mtd = do_map_probe("cfi_probe", &rsk7203_flash_map); + nr_parts = parse_mtd_partitions(flash_mtd, probes, + &parsed_partitions, 0); + /* If there is no partition table, used the hard coded table */ + if (nr_parts <= 0) { + flash_data.parts = rsk7203_partitions; + flash_data.nr_parts = ARRAY_SIZE(rsk7203_partitions); + } else { + flash_data.nr_parts = nr_parts; + flash_data.parts = parsed_partitions; + } +} + + +static struct platform_device *rsk7203_devices[] __initdata = { + &smc911x_device, + &flash_device, +}; + +static int __init rsk7203_devices_setup(void) +{ + set_mtd_partitions(); + return platform_add_devices(rsk7203_devices, + ARRAY_SIZE(rsk7203_devices)); +} +device_initcall(rsk7203_devices_setup); + +/* + * The Machine Vector + */ +static struct sh_machine_vector mv_rsk7203 __initmv = { + .mv_name = "RSK+7203", +}; diff --git a/arch/sh/boards/board-sh7785lcr.c b/arch/sh/boards/board-sh7785lcr.c new file mode 100644 index 000000000000..b95d674ee704 --- /dev/null +++ b/arch/sh/boards/board-sh7785lcr.c @@ -0,0 +1,302 @@ +/* + * Renesas Technology Corp. R0P7785LC0011RL Support. + * + * Copyright (C) 2008 Yoshihiro Shimoda + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/sm501.h> +#include <linux/sm501-regs.h> +#include <linux/fb.h> +#include <linux/mtd/physmap.h> +#include <linux/delay.h> +#include <linux/i2c.h> +#include <linux/i2c-pca-platform.h> +#include <linux/i2c-algo-pca.h> +#include <asm/heartbeat.h> +#include <asm/sh7785lcr.h> + +/* + * NOTE: This board has 2 physical memory maps. + * Please look at include/asm-sh/sh7785lcr.h or hardware manual. + */ +static struct resource heartbeat_resources[] = { + [0] = { + .start = PLD_LEDCR, + .end = PLD_LEDCR, + .flags = IORESOURCE_MEM, + }, +}; + +static struct heartbeat_data heartbeat_data = { + .regsize = 8, +}; + +static struct platform_device heartbeat_device = { + .name = "heartbeat", + .id = -1, + .dev = { + .platform_data = &heartbeat_data, + }, + .num_resources = ARRAY_SIZE(heartbeat_resources), + .resource = heartbeat_resources, +}; + +static struct mtd_partition nor_flash_partitions[] = { + { + .name = "loader", + .offset = 0x00000000, + .size = 512 * 1024, + }, + { + .name = "bootenv", + .offset = MTDPART_OFS_APPEND, + .size = 512 * 1024, + }, + { + .name = "kernel", + .offset = MTDPART_OFS_APPEND, + .size = 4 * 1024 * 1024, + }, + { + .name = "data", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct physmap_flash_data nor_flash_data = { + .width = 4, + .parts = nor_flash_partitions, + .nr_parts = ARRAY_SIZE(nor_flash_partitions), +}; + +static struct resource nor_flash_resources[] = { + [0] = { + .start = NOR_FLASH_ADDR, + .end = NOR_FLASH_ADDR + NOR_FLASH_SIZE - 1, + .flags = IORESOURCE_MEM, + } +}; + +static struct platform_device nor_flash_device = { + .name = "physmap-flash", + .dev = { + .platform_data = &nor_flash_data, + }, + .num_resources = ARRAY_SIZE(nor_flash_resources), + .resource = nor_flash_resources, +}; + +static struct resource r8a66597_usb_host_resources[] = { + [0] = { + .name = "r8a66597_hcd", + .start = R8A66597_ADDR, + .end = R8A66597_ADDR + R8A66597_SIZE - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .name = "r8a66597_hcd", + .start = 2, + .end = 2, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device r8a66597_usb_host_device = { + .name = "r8a66597_hcd", + .id = -1, + .dev = { + .dma_mask = NULL, + .coherent_dma_mask = 0xffffffff, + }, + .num_resources = ARRAY_SIZE(r8a66597_usb_host_resources), + .resource = r8a66597_usb_host_resources, +}; + +static struct resource sm501_resources[] = { + [0] = { + .start = SM107_MEM_ADDR, + .end = SM107_MEM_ADDR + SM107_MEM_SIZE - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = SM107_REG_ADDR, + .end = SM107_REG_ADDR + SM107_REG_SIZE - 1, + .flags = IORESOURCE_MEM, + }, + [2] = { + .start = 10, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct fb_videomode sm501_default_mode_crt = { + .pixclock = 35714, /* 28MHz */ + .xres = 640, + .yres = 480, + .left_margin = 105, + .right_margin = 16, + .upper_margin = 33, + .lower_margin = 10, + .hsync_len = 39, + .vsync_len = 2, + .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, +}; + +static struct fb_videomode sm501_default_mode_pnl = { + .pixclock = 40000, /* 25MHz */ + .xres = 640, + .yres = 480, + .left_margin = 2, + .right_margin = 16, + .upper_margin = 33, + .lower_margin = 10, + .hsync_len = 39, + .vsync_len = 2, + .sync = 0, +}; + +static struct sm501_platdata_fbsub sm501_pdata_fbsub_pnl = { + .def_bpp = 16, + .def_mode = &sm501_default_mode_pnl, + .flags = SM501FB_FLAG_USE_INIT_MODE | + SM501FB_FLAG_USE_HWCURSOR | + SM501FB_FLAG_USE_HWACCEL | + SM501FB_FLAG_DISABLE_AT_EXIT | + SM501FB_FLAG_PANEL_NO_VBIASEN, +}; + +static struct sm501_platdata_fbsub sm501_pdata_fbsub_crt = { + .def_bpp = 16, + .def_mode = &sm501_default_mode_crt, + .flags = SM501FB_FLAG_USE_INIT_MODE | + SM501FB_FLAG_USE_HWCURSOR | + SM501FB_FLAG_USE_HWACCEL | + SM501FB_FLAG_DISABLE_AT_EXIT, +}; + +static struct sm501_platdata_fb sm501_fb_pdata = { + .fb_route = SM501_FB_OWN, + .fb_crt = &sm501_pdata_fbsub_crt, + .fb_pnl = &sm501_pdata_fbsub_pnl, +}; + +static struct sm501_initdata sm501_initdata = { + .gpio_high = { + .set = 0x00001fe0, + .mask = 0x0, + }, + .devices = 0, + .mclk = 84 * 1000000, + .m1xclk = 112 * 1000000, +}; + +static struct sm501_platdata sm501_platform_data = { + .init = &sm501_initdata, + .fb = &sm501_fb_pdata, +}; + +static struct platform_device sm501_device = { + .name = "sm501", + .id = -1, + .dev = { + .platform_data = &sm501_platform_data, + }, + .num_resources = ARRAY_SIZE(sm501_resources), + .resource = sm501_resources, +}; + +static struct resource i2c_resources[] = { + [0] = { + .start = PCA9564_ADDR, + .end = PCA9564_ADDR + PCA9564_SIZE - 1, + .flags = IORESOURCE_MEM | IORESOURCE_MEM_8BIT, + }, + [1] = { + .start = 12, + .end = 12, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct i2c_pca9564_pf_platform_data i2c_platform_data = { + .gpio = 0, + .i2c_clock_speed = I2C_PCA_CON_330kHz, + .timeout = 100, +}; + +static struct platform_device i2c_device = { + .name = "i2c-pca-platform", + .id = -1, + .dev = { + .platform_data = &i2c_platform_data, + }, + .num_resources = ARRAY_SIZE(i2c_resources), + .resource = i2c_resources, +}; + +static struct platform_device *sh7785lcr_devices[] __initdata = { + &heartbeat_device, + &nor_flash_device, + &r8a66597_usb_host_device, + &sm501_device, + &i2c_device, +}; + +static struct i2c_board_info __initdata sh7785lcr_i2c_devices[] = { + { + I2C_BOARD_INFO("r2025sd", 0x32), + }, +}; + +static int __init sh7785lcr_devices_setup(void) +{ + i2c_register_board_info(0, sh7785lcr_i2c_devices, + ARRAY_SIZE(sh7785lcr_i2c_devices)); + + return platform_add_devices(sh7785lcr_devices, + ARRAY_SIZE(sh7785lcr_devices)); +} +__initcall(sh7785lcr_devices_setup); + +/* Initialize IRQ setting */ +void __init init_sh7785lcr_IRQ(void) +{ + plat_irq_setup_pins(IRQ_MODE_IRQ7654); + plat_irq_setup_pins(IRQ_MODE_IRQ3210); +} + +static void sh7785lcr_power_off(void) +{ + ctrl_outb(0x01, P2SEGADDR(PLD_POFCR)); +} + +/* Initialize the board */ +static void __init sh7785lcr_setup(char **cmdline_p) +{ + void __iomem *sm501_reg; + + printk(KERN_INFO "Renesas Technology Corp. R0P7785LC0011RL support.\n"); + + pm_power_off = sh7785lcr_power_off; + + /* sm501 DRAM configuration */ + sm501_reg = (void __iomem *)0xb3e00000 + SM501_DRAM_CONTROL; + writel(0x000307c2, sm501_reg); +} + +/* + * The Machine Vector + */ +static struct sh_machine_vector mv_sh7785lcr __initmv = { + .mv_name = "SH7785LCR", + .mv_setup = sh7785lcr_setup, + .mv_init_irq = init_sh7785lcr_IRQ, +}; + diff --git a/arch/sh/boards/shmin/setup.c b/arch/sh/boards/board-shmin.c index 16e5dae8ecfb..16e5dae8ecfb 100644 --- a/arch/sh/boards/shmin/setup.c +++ b/arch/sh/boards/board-shmin.c diff --git a/arch/sh/boards/cayman/Makefile b/arch/sh/boards/mach-cayman/Makefile index 489a8f867368..489a8f867368 100644 --- a/arch/sh/boards/cayman/Makefile +++ b/arch/sh/boards/mach-cayman/Makefile diff --git a/arch/sh/boards/cayman/irq.c b/arch/sh/boards/mach-cayman/irq.c index 30ec7bebfaf1..ceb37ae92c70 100644 --- a/arch/sh/boards/cayman/irq.c +++ b/arch/sh/boards/mach-cayman/irq.c @@ -13,7 +13,7 @@ #include <linux/irq.h> #include <linux/interrupt.h> #include <linux/signal.h> -#include <asm/cpu/irq.h> +#include <cpu/irq.h> #include <asm/page.h> /* Setup for the SMSC FDC37C935 / LAN91C100FD */ diff --git a/arch/sh/boards/cayman/led.c b/arch/sh/boards/mach-cayman/led.c index a808eac4ecd6..a808eac4ecd6 100644 --- a/arch/sh/boards/cayman/led.c +++ b/arch/sh/boards/mach-cayman/led.c diff --git a/arch/sh/boards/cayman/setup.c b/arch/sh/boards/mach-cayman/setup.c index 8c9fa472d8f5..e7f9cc5f2ff1 100644 --- a/arch/sh/boards/cayman/setup.c +++ b/arch/sh/boards/mach-cayman/setup.c @@ -13,7 +13,7 @@ #include <linux/init.h> #include <linux/io.h> #include <linux/kernel.h> -#include <asm/cpu/irq.h> +#include <cpu/irq.h> /* * Platform Dependent Interrupt Priorities. diff --git a/arch/sh/boards/dreamcast/Makefile b/arch/sh/boards/mach-dreamcast/Makefile index 7b97546c7e5f..7b97546c7e5f 100644 --- a/arch/sh/boards/dreamcast/Makefile +++ b/arch/sh/boards/mach-dreamcast/Makefile diff --git a/arch/sh/boards/dreamcast/irq.c b/arch/sh/boards/mach-dreamcast/irq.c index 9d0673a9092a..67bdc33dd411 100644 --- a/arch/sh/boards/dreamcast/irq.c +++ b/arch/sh/boards/mach-dreamcast/irq.c @@ -12,7 +12,7 @@ #include <linux/irq.h> #include <asm/io.h> #include <asm/irq.h> -#include <asm/dreamcast/sysasic.h> +#include <mach/sysasic.h> /* Dreamcast System ASIC Hardware Events - diff --git a/arch/sh/boards/dreamcast/rtc.c b/arch/sh/boards/mach-dreamcast/rtc.c index b3a876a3b859..a7433685798d 100644 --- a/arch/sh/boards/dreamcast/rtc.c +++ b/arch/sh/boards/mach-dreamcast/rtc.c @@ -30,7 +30,7 @@ * * Grabs the current RTC seconds counter and adjusts it to the Unix Epoch. */ -void aica_rtc_gettimeofday(struct timespec *ts) +static void aica_rtc_gettimeofday(struct timespec *ts) { unsigned long val1, val2; @@ -54,7 +54,7 @@ void aica_rtc_gettimeofday(struct timespec *ts) * * Adjusts the given @tv to the AICA Epoch and sets the RTC seconds counter. */ -int aica_rtc_settimeofday(const time_t secs) +static int aica_rtc_settimeofday(const time_t secs) { unsigned long val1, val2; unsigned long adj = secs + TWENTY_YEARS; diff --git a/arch/sh/boards/dreamcast/setup.c b/arch/sh/boards/mach-dreamcast/setup.c index 2581c8cd5df7..7d944fc75e93 100644 --- a/arch/sh/boards/dreamcast/setup.c +++ b/arch/sh/boards/mach-dreamcast/setup.c @@ -26,7 +26,7 @@ #include <asm/irq.h> #include <asm/rtc.h> #include <asm/machvec.h> -#include <asm/mach/sysasic.h> +#include <mach/sysasic.h> extern struct hw_interrupt_type systemasic_int; extern void aica_time_init(void); diff --git a/arch/sh/boards/renesas/edosk7705/Makefile b/arch/sh/boards/mach-edosk7705/Makefile index 14bdd531f116..14bdd531f116 100644 --- a/arch/sh/boards/renesas/edosk7705/Makefile +++ b/arch/sh/boards/mach-edosk7705/Makefile diff --git a/arch/sh/boards/renesas/edosk7705/io.c b/arch/sh/boards/mach-edosk7705/io.c index 541cea2a652f..541cea2a652f 100644 --- a/arch/sh/boards/renesas/edosk7705/io.c +++ b/arch/sh/boards/mach-edosk7705/io.c diff --git a/arch/sh/boards/renesas/edosk7705/setup.c b/arch/sh/boards/mach-edosk7705/setup.c index f076c45308dd..f076c45308dd 100644 --- a/arch/sh/boards/renesas/edosk7705/setup.c +++ b/arch/sh/boards/mach-edosk7705/setup.c diff --git a/arch/sh/boards/renesas/r7780rp/Kconfig b/arch/sh/boards/mach-highlander/Kconfig index fc8f28e04ba3..fc8f28e04ba3 100644 --- a/arch/sh/boards/renesas/r7780rp/Kconfig +++ b/arch/sh/boards/mach-highlander/Kconfig diff --git a/arch/sh/boards/renesas/r7780rp/Makefile b/arch/sh/boards/mach-highlander/Makefile index 20a10080b11f..20a10080b11f 100644 --- a/arch/sh/boards/renesas/r7780rp/Makefile +++ b/arch/sh/boards/mach-highlander/Makefile diff --git a/arch/sh/boards/renesas/r7780rp/irq-r7780mp.c b/arch/sh/boards/mach-highlander/irq-r7780mp.c index ae1cfcb29700..ae1cfcb29700 100644 --- a/arch/sh/boards/renesas/r7780rp/irq-r7780mp.c +++ b/arch/sh/boards/mach-highlander/irq-r7780mp.c diff --git a/arch/sh/boards/renesas/r7780rp/irq-r7780rp.c b/arch/sh/boards/mach-highlander/irq-r7780rp.c index 9d3921fe27c0..9d3921fe27c0 100644 --- a/arch/sh/boards/renesas/r7780rp/irq-r7780rp.c +++ b/arch/sh/boards/mach-highlander/irq-r7780rp.c diff --git a/arch/sh/boards/renesas/r7780rp/irq-r7785rp.c b/arch/sh/boards/mach-highlander/irq-r7785rp.c index 896c045aa39d..896c045aa39d 100644 --- a/arch/sh/boards/renesas/r7780rp/irq-r7785rp.c +++ b/arch/sh/boards/mach-highlander/irq-r7785rp.c diff --git a/arch/sh/boards/renesas/r7780rp/psw.c b/arch/sh/boards/mach-highlander/psw.c index c844dfa5d58d..be8d5477fc65 100644 --- a/arch/sh/boards/renesas/r7780rp/psw.c +++ b/arch/sh/boards/mach-highlander/psw.c @@ -13,7 +13,7 @@ #include <linux/init.h> #include <linux/interrupt.h> #include <linux/platform_device.h> -#include <asm/mach/r7780rp.h> +#include <asm/r7780rp.h> #include <asm/push-switch.h> static irqreturn_t psw_irq_handler(int irq, void *arg) diff --git a/arch/sh/boards/renesas/r7780rp/setup.c b/arch/sh/boards/mach-highlander/setup.c index bc79afb6fc4c..bc79afb6fc4c 100644 --- a/arch/sh/boards/renesas/r7780rp/setup.c +++ b/arch/sh/boards/mach-highlander/setup.c diff --git a/arch/sh/boards/hp6xx/Makefile b/arch/sh/boards/mach-hp6xx/Makefile index b3124278247c..b3124278247c 100644 --- a/arch/sh/boards/hp6xx/Makefile +++ b/arch/sh/boards/mach-hp6xx/Makefile diff --git a/arch/sh/boards/hp6xx/hp6xx_apm.c b/arch/sh/boards/mach-hp6xx/hp6xx_apm.c index 177f4f028e0d..177f4f028e0d 100644 --- a/arch/sh/boards/hp6xx/hp6xx_apm.c +++ b/arch/sh/boards/mach-hp6xx/hp6xx_apm.c diff --git a/arch/sh/boards/hp6xx/pm.c b/arch/sh/boards/mach-hp6xx/pm.c index d22f6eac9cca..e96684def788 100644 --- a/arch/sh/boards/hp6xx/pm.c +++ b/arch/sh/boards/mach-hp6xx/pm.c @@ -13,7 +13,7 @@ #include <asm/io.h> #include <asm/hd64461.h> #include <asm/hp6xx.h> -#include <asm/cpu/dac.h> +#include <cpu/dac.h> #include <asm/pm.h> #define STBCR 0xffffff82 diff --git a/arch/sh/boards/hp6xx/pm_wakeup.S b/arch/sh/boards/mach-hp6xx/pm_wakeup.S index 45e9bf0b9115..44b648cf6f23 100644 --- a/arch/sh/boards/hp6xx/pm_wakeup.S +++ b/arch/sh/boards/mach-hp6xx/pm_wakeup.S @@ -8,7 +8,7 @@ */ #include <linux/linkage.h> -#include <asm/cpu/mmu_context.h> +#include <cpu/mmu_context.h> #define k0 r0 #define k1 r1 diff --git a/arch/sh/boards/hp6xx/setup.c b/arch/sh/boards/mach-hp6xx/setup.c index 2f414ac3c690..475b46caec1f 100644 --- a/arch/sh/boards/hp6xx/setup.c +++ b/arch/sh/boards/mach-hp6xx/setup.c @@ -16,7 +16,7 @@ #include <asm/io.h> #include <asm/irq.h> #include <asm/hp6xx.h> -#include <asm/cpu/dac.h> +#include <cpu/dac.h> #define SCPCR 0xa4000116 #define SCPDR 0xa4000136 diff --git a/arch/sh/boards/landisk/Makefile b/arch/sh/boards/mach-landisk/Makefile index a696b4277fa9..a696b4277fa9 100644 --- a/arch/sh/boards/landisk/Makefile +++ b/arch/sh/boards/mach-landisk/Makefile diff --git a/arch/sh/boards/landisk/gio.c b/arch/sh/boards/mach-landisk/gio.c index 0c15b0a50b99..25cdf7358000 100644 --- a/arch/sh/boards/landisk/gio.c +++ b/arch/sh/boards/mach-landisk/gio.c @@ -20,8 +20,8 @@ #include <linux/fs.h> #include <asm/io.h> #include <asm/uaccess.h> -#include <asm/landisk/gio.h> -#include <asm/landisk/iodata_landisk.h> +#include <mach-landisk/mach/gio.h> +#include <mach-landisk/mach/iodata_landisk.h> #define DEVCOUNT 4 #define GIO_MINOR 2 /* GIO minor no. */ diff --git a/arch/sh/boards/landisk/irq.c b/arch/sh/boards/mach-landisk/irq.c index 258649491d44..7b284cde1f58 100644 --- a/arch/sh/boards/landisk/irq.c +++ b/arch/sh/boards/mach-landisk/irq.c @@ -16,7 +16,7 @@ #include <linux/irq.h> #include <linux/interrupt.h> #include <linux/io.h> -#include <asm/landisk/iodata_landisk.h> +#include <mach-landisk/mach/iodata_landisk.h> static void disable_landisk_irq(unsigned int irq) { diff --git a/arch/sh/boards/landisk/psw.c b/arch/sh/boards/mach-landisk/psw.c index 5a9b70b5decb..e6b0efa098d1 100644 --- a/arch/sh/boards/landisk/psw.c +++ b/arch/sh/boards/mach-landisk/psw.c @@ -14,7 +14,7 @@ #include <linux/init.h> #include <linux/interrupt.h> #include <linux/platform_device.h> -#include <asm/landisk/iodata_landisk.h> +#include <mach-landisk/mach/iodata_landisk.h> #include <asm/push-switch.h> static irqreturn_t psw_irq_handler(int irq, void *arg) diff --git a/arch/sh/boards/landisk/setup.c b/arch/sh/boards/mach-landisk/setup.c index 2b708ec72558..db22ea2e6d49 100644 --- a/arch/sh/boards/landisk/setup.c +++ b/arch/sh/boards/mach-landisk/setup.c @@ -18,7 +18,7 @@ #include <linux/pm.h> #include <linux/mm.h> #include <asm/machvec.h> -#include <asm/landisk/iodata_landisk.h> +#include <mach-landisk/mach/iodata_landisk.h> #include <asm/io.h> void init_landisk_IRQ(void); diff --git a/arch/sh/boards/lboxre2/Makefile b/arch/sh/boards/mach-lboxre2/Makefile index e9ed140c06f6..e9ed140c06f6 100644 --- a/arch/sh/boards/lboxre2/Makefile +++ b/arch/sh/boards/mach-lboxre2/Makefile diff --git a/arch/sh/boards/lboxre2/irq.c b/arch/sh/boards/mach-lboxre2/irq.c index 5a1c3bbe7b50..5a1c3bbe7b50 100644 --- a/arch/sh/boards/lboxre2/irq.c +++ b/arch/sh/boards/mach-lboxre2/irq.c diff --git a/arch/sh/boards/lboxre2/setup.c b/arch/sh/boards/mach-lboxre2/setup.c index c74440d38ee9..c74440d38ee9 100644 --- a/arch/sh/boards/lboxre2/setup.c +++ b/arch/sh/boards/mach-lboxre2/setup.c diff --git a/arch/sh/boards/superh/microdev/Makefile b/arch/sh/boards/mach-microdev/Makefile index 1387dd6c85eb..1387dd6c85eb 100644 --- a/arch/sh/boards/superh/microdev/Makefile +++ b/arch/sh/boards/mach-microdev/Makefile diff --git a/arch/sh/boards/superh/microdev/io.c b/arch/sh/boards/mach-microdev/io.c index 9f8a540f7e14..9f8a540f7e14 100644 --- a/arch/sh/boards/superh/microdev/io.c +++ b/arch/sh/boards/mach-microdev/io.c diff --git a/arch/sh/boards/superh/microdev/irq.c b/arch/sh/boards/mach-microdev/irq.c index 4d335077a3ff..4d335077a3ff 100644 --- a/arch/sh/boards/superh/microdev/irq.c +++ b/arch/sh/boards/mach-microdev/irq.c diff --git a/arch/sh/boards/superh/microdev/led.c b/arch/sh/boards/mach-microdev/led.c index 36e54b47a752..36e54b47a752 100644 --- a/arch/sh/boards/superh/microdev/led.c +++ b/arch/sh/boards/mach-microdev/led.c diff --git a/arch/sh/boards/superh/microdev/setup.c b/arch/sh/boards/mach-microdev/setup.c index fc8cd06d66cf..fc8cd06d66cf 100644 --- a/arch/sh/boards/superh/microdev/setup.c +++ b/arch/sh/boards/mach-microdev/setup.c diff --git a/arch/sh/boards/mach-migor/Kconfig b/arch/sh/boards/mach-migor/Kconfig new file mode 100644 index 000000000000..a7b3b728ec3c --- /dev/null +++ b/arch/sh/boards/mach-migor/Kconfig @@ -0,0 +1,15 @@ +if SH_MIGOR + +choice + prompt "Migo-R LCD Panel Board Selection" + default SH_MIGOR_QVGA + +config SH_MIGOR_QVGA + bool "QVGA (320x240)" + +config SH_MIGOR_RTA_WVGA + bool "RTA WVGA (800x480)" + +endchoice + +endif diff --git a/arch/sh/boards/mach-migor/Makefile b/arch/sh/boards/mach-migor/Makefile new file mode 100644 index 000000000000..5f231dd25c0e --- /dev/null +++ b/arch/sh/boards/mach-migor/Makefile @@ -0,0 +1,2 @@ +obj-y := setup.o +obj-$(CONFIG_SH_MIGOR_QVGA) += lcd_qvga.o diff --git a/arch/sh/boards/mach-migor/lcd_qvga.c b/arch/sh/boards/mach-migor/lcd_qvga.c new file mode 100644 index 000000000000..6e9609596448 --- /dev/null +++ b/arch/sh/boards/mach-migor/lcd_qvga.c @@ -0,0 +1,165 @@ +/* + * Support for SuperH MigoR Quarter VGA LCD Panel + * + * Copyright (C) 2008 Magnus Damm + * + * Based on lcd_powertip.c from Kenati Technologies Pvt Ltd. + * Copyright (c) 2007 Ujjwal Pande <ujjwal@kenati.com>, + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/fb.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <asm/sh_mobile_lcdc.h> +#include <asm/migor.h> + +/* LCD Module is a PH240320T according to board schematics. This module + * is made up of a 240x320 LCD hooked up to a R61505U (or HX8347-A01?) + * Driver IC. This IC is connected to the SH7722 built-in LCDC using a + * SYS-80 interface configured in 16 bit mode. + * + * Index 0: "Device Code Read" returns 0x1505. + */ + +static void reset_lcd_module(void) +{ + ctrl_outb(ctrl_inb(PORT_PHDR) & ~0x04, PORT_PHDR); + mdelay(2); + ctrl_outb(ctrl_inb(PORT_PHDR) | 0x04, PORT_PHDR); + mdelay(1); +} + +/* DB0-DB7 are connected to D1-D8, and DB8-DB15 to D10-D17 */ + +static unsigned long adjust_reg18(unsigned short data) +{ + unsigned long tmp1, tmp2; + + tmp1 = (data<<1 | 0x00000001) & 0x000001FF; + tmp2 = (data<<2 | 0x00000200) & 0x0003FE00; + return tmp1 | tmp2; +} + +static void write_reg(void *sys_ops_handle, + struct sh_mobile_lcdc_sys_bus_ops *sys_ops, + unsigned short reg, unsigned short data) +{ + sys_ops->write_index(sys_ops_handle, adjust_reg18(reg << 8 | data)); +} + +static void write_reg16(void *sys_ops_handle, + struct sh_mobile_lcdc_sys_bus_ops *sys_ops, + unsigned short reg, unsigned short data) +{ + sys_ops->write_index(sys_ops_handle, adjust_reg18(reg)); + sys_ops->write_data(sys_ops_handle, adjust_reg18(data)); +} + +static unsigned long read_reg16(void *sys_ops_handle, + struct sh_mobile_lcdc_sys_bus_ops *sys_ops, + unsigned short reg) +{ + unsigned long data; + + sys_ops->write_index(sys_ops_handle, adjust_reg18(reg)); + data = sys_ops->read_data(sys_ops_handle); + return ((data >> 1) & 0xff) | ((data >> 2) & 0xff00); +} + +static void migor_lcd_qvga_seq(void *sys_ops_handle, + struct sh_mobile_lcdc_sys_bus_ops *sys_ops, + unsigned short const *data, int no_data) +{ + int i; + + for (i = 0; i < no_data; i += 2) + write_reg16(sys_ops_handle, sys_ops, data[i], data[i + 1]); +} + +static const unsigned short sync_data[] = { + 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, +}; + +static const unsigned short magic0_data[] = { + 0x0060, 0x2700, 0x0008, 0x0808, 0x0090, 0x001A, 0x0007, 0x0001, + 0x0017, 0x0001, 0x0019, 0x0000, 0x0010, 0x17B0, 0x0011, 0x0116, + 0x0012, 0x0198, 0x0013, 0x1400, 0x0029, 0x000C, 0x0012, 0x01B8, +}; + +static const unsigned short magic1_data[] = { + 0x0030, 0x0307, 0x0031, 0x0303, 0x0032, 0x0603, 0x0033, 0x0202, + 0x0034, 0x0202, 0x0035, 0x0202, 0x0036, 0x1F1F, 0x0037, 0x0303, + 0x0038, 0x0303, 0x0039, 0x0603, 0x003A, 0x0202, 0x003B, 0x0102, + 0x003C, 0x0204, 0x003D, 0x0000, 0x0001, 0x0100, 0x0002, 0x0300, + 0x0003, 0x5028, 0x0020, 0x00ef, 0x0021, 0x0000, 0x0004, 0x0000, + 0x0009, 0x0000, 0x000A, 0x0008, 0x000C, 0x0000, 0x000D, 0x0000, + 0x0015, 0x8000, +}; + +static const unsigned short magic2_data[] = { + 0x0061, 0x0001, 0x0092, 0x0100, 0x0093, 0x0001, 0x0007, 0x0021, +}; + +static const unsigned short magic3_data[] = { + 0x0010, 0x16B0, 0x0011, 0x0111, 0x0007, 0x0061, +}; + +int migor_lcd_qvga_setup(void *board_data, void *sohandle, + struct sh_mobile_lcdc_sys_bus_ops *so) +{ + unsigned long xres = 320; + unsigned long yres = 240; + int k; + + reset_lcd_module(); + migor_lcd_qvga_seq(sohandle, so, sync_data, ARRAY_SIZE(sync_data)); + + if (read_reg16(sohandle, so, 0) != 0x1505) + return -ENODEV; + + pr_info("Migo-R QVGA LCD Module detected.\n"); + + migor_lcd_qvga_seq(sohandle, so, sync_data, ARRAY_SIZE(sync_data)); + write_reg16(sohandle, so, 0x00A4, 0x0001); + mdelay(10); + + migor_lcd_qvga_seq(sohandle, so, magic0_data, ARRAY_SIZE(magic0_data)); + mdelay(100); + + migor_lcd_qvga_seq(sohandle, so, magic1_data, ARRAY_SIZE(magic1_data)); + write_reg16(sohandle, so, 0x0050, 0xef - (yres - 1)); + write_reg16(sohandle, so, 0x0051, 0x00ef); + write_reg16(sohandle, so, 0x0052, 0x0000); + write_reg16(sohandle, so, 0x0053, xres - 1); + + migor_lcd_qvga_seq(sohandle, so, magic2_data, ARRAY_SIZE(magic2_data)); + mdelay(10); + + migor_lcd_qvga_seq(sohandle, so, magic3_data, ARRAY_SIZE(magic3_data)); + mdelay(40); + + /* clear GRAM to avoid displaying garbage */ + + write_reg16(sohandle, so, 0x0020, 0x0000); /* horiz addr */ + write_reg16(sohandle, so, 0x0021, 0x0000); /* vert addr */ + + for (k = 0; k < (xres * 256); k++) /* yes, 256 words per line */ + write_reg16(sohandle, so, 0x0022, 0x0000); + + write_reg16(sohandle, so, 0x0020, 0x0000); /* reset horiz addr */ + write_reg16(sohandle, so, 0x0021, 0x0000); /* reset vert addr */ + write_reg16(sohandle, so, 0x0007, 0x0173); + mdelay(40); + + /* enable display */ + write_reg(sohandle, so, 0x00, 0x22); + mdelay(100); + return 0; +} diff --git a/arch/sh/boards/mach-migor/setup.c b/arch/sh/boards/mach-migor/setup.c new file mode 100644 index 000000000000..e499ee384d58 --- /dev/null +++ b/arch/sh/boards/mach-migor/setup.c @@ -0,0 +1,527 @@ +/* + * Renesas System Solutions Asia Pte. Ltd - Migo-R + * + * Copyright (C) 2008 Magnus Damm + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/interrupt.h> +#include <linux/input.h> +#include <linux/mtd/physmap.h> +#include <linux/mtd/nand.h> +#include <linux/i2c.h> +#include <linux/smc91x.h> +#include <linux/delay.h> +#include <linux/clk.h> +#include <media/soc_camera_platform.h> +#include <media/sh_mobile_ceu.h> +#include <asm/clock.h> +#include <asm/machvec.h> +#include <asm/io.h> +#include <asm/sh_keysc.h> +#include <asm/sh_mobile_lcdc.h> +#include <asm/migor.h> + +/* Address IRQ Size Bus Description + * 0x00000000 64MB 16 NOR Flash (SP29PL256N) + * 0x0c000000 64MB 64 SDRAM (2xK4M563233G) + * 0x10000000 IRQ0 16 Ethernet (SMC91C111) + * 0x14000000 IRQ4 16 USB 2.0 Host Controller (M66596) + * 0x18000000 8GB 8 NAND Flash (K9K8G08U0A) + */ + +static struct smc91x_platdata smc91x_info = { + .flags = SMC91X_USE_16BIT, +}; + +static struct resource smc91x_eth_resources[] = { + [0] = { + .name = "SMC91C111" , + .start = 0x10000300, + .end = 0x1000030f, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 32, /* IRQ0 */ + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, + }, +}; + +static struct platform_device smc91x_eth_device = { + .name = "smc91x", + .num_resources = ARRAY_SIZE(smc91x_eth_resources), + .resource = smc91x_eth_resources, + .dev = { + .platform_data = &smc91x_info, + }, +}; + +static struct sh_keysc_info sh_keysc_info = { + .mode = SH_KEYSC_MODE_2, /* KEYOUT0->4, KEYIN1->5 */ + .scan_timing = 3, + .delay = 5, + .keycodes = { + 0, KEY_UP, KEY_DOWN, KEY_LEFT, KEY_RIGHT, KEY_ENTER, + 0, KEY_F, KEY_C, KEY_D, KEY_H, KEY_1, + 0, KEY_2, KEY_3, KEY_4, KEY_5, KEY_6, + 0, KEY_7, KEY_8, KEY_9, KEY_S, KEY_0, + 0, KEY_P, KEY_STOP, KEY_REWIND, KEY_PLAY, KEY_FASTFORWARD, + }, +}; + +static struct resource sh_keysc_resources[] = { + [0] = { + .start = 0x044b0000, + .end = 0x044b000f, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 79, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device sh_keysc_device = { + .name = "sh_keysc", + .num_resources = ARRAY_SIZE(sh_keysc_resources), + .resource = sh_keysc_resources, + .dev = { + .platform_data = &sh_keysc_info, + }, +}; + +static struct mtd_partition migor_nor_flash_partitions[] = +{ + { + .name = "uboot", + .offset = 0, + .size = (1 * 1024 * 1024), + .mask_flags = MTD_WRITEABLE, /* Read-only */ + }, + { + .name = "rootfs", + .offset = MTDPART_OFS_APPEND, + .size = (15 * 1024 * 1024), + }, + { + .name = "other", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct physmap_flash_data migor_nor_flash_data = { + .width = 2, + .parts = migor_nor_flash_partitions, + .nr_parts = ARRAY_SIZE(migor_nor_flash_partitions), +}; + +static struct resource migor_nor_flash_resources[] = { + [0] = { + .name = "NOR Flash", + .start = 0x00000000, + .end = 0x03ffffff, + .flags = IORESOURCE_MEM, + } +}; + +static struct platform_device migor_nor_flash_device = { + .name = "physmap-flash", + .resource = migor_nor_flash_resources, + .num_resources = ARRAY_SIZE(migor_nor_flash_resources), + .dev = { + .platform_data = &migor_nor_flash_data, + }, +}; + +static struct mtd_partition migor_nand_flash_partitions[] = { + { + .name = "nanddata1", + .offset = 0x0, + .size = 512 * 1024 * 1024, + }, + { + .name = "nanddata2", + .offset = MTDPART_OFS_APPEND, + .size = 512 * 1024 * 1024, + }, +}; + +static void migor_nand_flash_cmd_ctl(struct mtd_info *mtd, int cmd, + unsigned int ctrl) +{ + struct nand_chip *chip = mtd->priv; + + if (cmd == NAND_CMD_NONE) + return; + + if (ctrl & NAND_CLE) + writeb(cmd, chip->IO_ADDR_W + 0x00400000); + else if (ctrl & NAND_ALE) + writeb(cmd, chip->IO_ADDR_W + 0x00800000); + else + writeb(cmd, chip->IO_ADDR_W); +} + +static int migor_nand_flash_ready(struct mtd_info *mtd) +{ + return ctrl_inb(PORT_PADR) & 0x02; /* PTA1 */ +} + +struct platform_nand_data migor_nand_flash_data = { + .chip = { + .nr_chips = 1, + .partitions = migor_nand_flash_partitions, + .nr_partitions = ARRAY_SIZE(migor_nand_flash_partitions), + .chip_delay = 20, + .part_probe_types = (const char *[]) { "cmdlinepart", NULL }, + }, + .ctrl = { + .dev_ready = migor_nand_flash_ready, + .cmd_ctrl = migor_nand_flash_cmd_ctl, + }, +}; + +static struct resource migor_nand_flash_resources[] = { + [0] = { + .name = "NAND Flash", + .start = 0x18000000, + .end = 0x18ffffff, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device migor_nand_flash_device = { + .name = "gen_nand", + .resource = migor_nand_flash_resources, + .num_resources = ARRAY_SIZE(migor_nand_flash_resources), + .dev = { + .platform_data = &migor_nand_flash_data, + } +}; + +static struct sh_mobile_lcdc_info sh_mobile_lcdc_info = { +#ifdef CONFIG_SH_MIGOR_RTA_WVGA + .clock_source = LCDC_CLK_BUS, + .ch[0] = { + .chan = LCDC_CHAN_MAINLCD, + .bpp = 16, + .interface_type = RGB16, + .clock_divider = 2, + .lcd_cfg = { + .name = "LB070WV1", + .xres = 800, + .yres = 480, + .left_margin = 64, + .right_margin = 16, + .hsync_len = 120, + .upper_margin = 1, + .lower_margin = 17, + .vsync_len = 2, + .sync = 0, + }, + } +#endif +#ifdef CONFIG_SH_MIGOR_QVGA + .clock_source = LCDC_CLK_PERIPHERAL, + .ch[0] = { + .chan = LCDC_CHAN_MAINLCD, + .bpp = 16, + .interface_type = SYS16A, + .clock_divider = 10, + .lcd_cfg = { + .name = "PH240320T", + .xres = 320, + .yres = 240, + .left_margin = 0, + .right_margin = 16, + .hsync_len = 8, + .upper_margin = 1, + .lower_margin = 17, + .vsync_len = 2, + .sync = FB_SYNC_HOR_HIGH_ACT, + }, + .board_cfg = { + .setup_sys = migor_lcd_qvga_setup, + }, + .sys_bus_cfg = { + .ldmt2r = 0x06000a09, + .ldmt3r = 0x180e3418, + }, + } +#endif +}; + +static struct resource migor_lcdc_resources[] = { + [0] = { + .name = "LCDC", + .start = 0xfe940000, /* P4-only space */ + .end = 0xfe941fff, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device migor_lcdc_device = { + .name = "sh_mobile_lcdc_fb", + .num_resources = ARRAY_SIZE(migor_lcdc_resources), + .resource = migor_lcdc_resources, + .dev = { + .platform_data = &sh_mobile_lcdc_info, + }, +}; + +static struct clk *camera_clk; + +static void camera_power_on(void) +{ + unsigned char value; + + camera_clk = clk_get(NULL, "video_clk"); + clk_set_rate(camera_clk, 24000000); + clk_enable(camera_clk); /* start VIO_CKO */ + + mdelay(10); + value = ctrl_inb(PORT_PTDR); + value &= ~0x09; +#ifndef CONFIG_SH_MIGOR_RTA_WVGA + value |= 0x01; +#endif + ctrl_outb(value, PORT_PTDR); + mdelay(10); + + ctrl_outb(value | 8, PORT_PTDR); +} + +static void camera_power_off(void) +{ + clk_disable(camera_clk); /* stop VIO_CKO */ + clk_put(camera_clk); + + ctrl_outb(ctrl_inb(PORT_PTDR) & ~0x08, PORT_PTDR); +} + +#ifdef CONFIG_I2C +static unsigned char camera_ov772x_magic[] = +{ + 0x09, 0x01, 0x0c, 0x10, 0x0d, 0x41, 0x0e, 0x01, + 0x12, 0x00, 0x13, 0x8F, 0x14, 0x4A, 0x15, 0x00, + 0x16, 0x00, 0x17, 0x23, 0x18, 0xa0, 0x19, 0x07, + 0x1a, 0xf0, 0x1b, 0x40, 0x1f, 0x00, 0x20, 0x10, + 0x22, 0xff, 0x23, 0x01, 0x28, 0x00, 0x29, 0xa0, + 0x2a, 0x00, 0x2b, 0x00, 0x2c, 0xf0, 0x2d, 0x00, + 0x2e, 0x00, 0x30, 0x80, 0x31, 0x60, 0x32, 0x00, + 0x33, 0x00, 0x34, 0x00, 0x3d, 0x80, 0x3e, 0xe2, + 0x3f, 0x1f, 0x42, 0x80, 0x43, 0x80, 0x44, 0x80, + 0x45, 0x80, 0x46, 0x00, 0x47, 0x00, 0x48, 0x00, + 0x49, 0x50, 0x4a, 0x30, 0x4b, 0x50, 0x4c, 0x50, + 0x4d, 0x00, 0x4e, 0xef, 0x4f, 0x10, 0x50, 0x60, + 0x51, 0x00, 0x52, 0x00, 0x53, 0x24, 0x54, 0x7a, + 0x55, 0xfc, 0x62, 0xff, 0x63, 0xf0, 0x64, 0x1f, + 0x65, 0x00, 0x66, 0x10, 0x67, 0x00, 0x68, 0x00, + 0x69, 0x5c, 0x6a, 0x11, 0x6b, 0xa2, 0x6c, 0x01, + 0x6d, 0x50, 0x6e, 0x80, 0x6f, 0x80, 0x70, 0x0f, + 0x71, 0x00, 0x72, 0x00, 0x73, 0x0f, 0x74, 0x0f, + 0x75, 0xff, 0x78, 0x10, 0x79, 0x70, 0x7a, 0x70, + 0x7b, 0xf0, 0x7c, 0xf0, 0x7d, 0xf0, 0x7e, 0x0e, + 0x7f, 0x1a, 0x80, 0x31, 0x81, 0x5a, 0x82, 0x69, + 0x83, 0x75, 0x84, 0x7e, 0x85, 0x88, 0x86, 0x8f, + 0x87, 0x96, 0x88, 0xa3, 0x89, 0xaf, 0x8a, 0xc4, + 0x8b, 0xd7, 0x8c, 0xe8, 0x8d, 0x20, 0x8e, 0x00, + 0x8f, 0x00, 0x90, 0x08, 0x91, 0x10, 0x92, 0x1f, + 0x93, 0x01, 0x94, 0x2c, 0x95, 0x24, 0x96, 0x08, + 0x97, 0x14, 0x98, 0x24, 0x99, 0x38, 0x9a, 0x9e, + 0x9b, 0x00, 0x9c, 0x40, 0x9e, 0x11, 0x9f, 0x02, + 0xa0, 0x00, 0xa1, 0x40, 0xa2, 0x40, 0xa3, 0x06, + 0xa4, 0x00, 0xa6, 0x00, 0xa7, 0x40, 0xa8, 0x40, + 0xa9, 0x80, 0xaa, 0x80, 0xab, 0x06, 0xac, 0xff, + 0x12, 0x06, 0x64, 0x3f, 0x12, 0x46, 0x17, 0x3f, + 0x18, 0x50, 0x19, 0x03, 0x1a, 0x78, 0x29, 0x50, + 0x2c, 0x78, +}; + +static int ov772x_set_capture(struct soc_camera_platform_info *info, + int enable) +{ + struct i2c_adapter *a = i2c_get_adapter(0); + struct i2c_msg msg; + int ret = 0; + int i; + + if (!enable) + return 0; /* camera_power_off() is enough */ + + for (i = 0; i < ARRAY_SIZE(camera_ov772x_magic); i += 2) { + u_int8_t buf[8]; + + msg.addr = 0x21; + msg.buf = buf; + msg.len = 2; + msg.flags = 0; + + buf[0] = camera_ov772x_magic[i]; + buf[1] = camera_ov772x_magic[i + 1]; + + ret = (ret < 0) ? ret : i2c_transfer(a, &msg, 1); + } + + return ret; +} + +static struct soc_camera_platform_info ov772x_info = { + .iface = 0, + .format_name = "RGB565", + .format_depth = 16, + .format = { + .pixelformat = V4L2_PIX_FMT_RGB565, + .colorspace = V4L2_COLORSPACE_SRGB, + .width = 320, + .height = 240, + }, + .bus_param = SOCAM_PCLK_SAMPLE_RISING | SOCAM_HSYNC_ACTIVE_HIGH | + SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_MASTER | SOCAM_DATAWIDTH_8, + .set_capture = ov772x_set_capture, +}; + +static struct platform_device migor_camera_device = { + .name = "soc_camera_platform", + .dev = { + .platform_data = &ov772x_info, + }, +}; +#endif /* CONFIG_I2C */ + +static struct sh_mobile_ceu_info sh_mobile_ceu_info = { + .flags = SOCAM_MASTER | SOCAM_DATAWIDTH_8 | SOCAM_PCLK_SAMPLE_RISING \ + | SOCAM_HSYNC_ACTIVE_HIGH | SOCAM_VSYNC_ACTIVE_HIGH, + .enable_camera = camera_power_on, + .disable_camera = camera_power_off, +}; + +static struct resource migor_ceu_resources[] = { + [0] = { + .name = "CEU", + .start = 0xfe910000, + .end = 0xfe91009f, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 52, + .flags = IORESOURCE_IRQ, + }, + [2] = { + /* place holder for contiguous memory */ + }, +}; + +static struct platform_device migor_ceu_device = { + .name = "sh_mobile_ceu", + .num_resources = ARRAY_SIZE(migor_ceu_resources), + .resource = migor_ceu_resources, + .dev = { + .platform_data = &sh_mobile_ceu_info, + }, +}; + +static struct platform_device *migor_devices[] __initdata = { + &smc91x_eth_device, + &sh_keysc_device, + &migor_lcdc_device, + &migor_ceu_device, +#ifdef CONFIG_I2C + &migor_camera_device, +#endif + &migor_nor_flash_device, + &migor_nand_flash_device, +}; + +static struct i2c_board_info migor_i2c_devices[] = { + { + I2C_BOARD_INFO("rs5c372b", 0x32), + }, + { + I2C_BOARD_INFO("migor_ts", 0x51), + .irq = 38, /* IRQ6 */ + }, +}; + +static int __init migor_devices_setup(void) +{ + clk_always_enable("mstp214"); /* KEYSC */ + clk_always_enable("mstp200"); /* LCDC */ + clk_always_enable("mstp203"); /* CEU */ + + platform_resource_setup_memory(&migor_ceu_device, "ceu", 4 << 20); + + i2c_register_board_info(0, migor_i2c_devices, + ARRAY_SIZE(migor_i2c_devices)); + + return platform_add_devices(migor_devices, ARRAY_SIZE(migor_devices)); +} +__initcall(migor_devices_setup); + +static void __init migor_setup(char **cmdline_p) +{ + /* SMC91C111 - Enable IRQ0 */ + ctrl_outw(ctrl_inw(PORT_PJCR) & ~0x0003, PORT_PJCR); + + /* KEYSC */ + ctrl_outw(ctrl_inw(PORT_PYCR) & ~0x0fff, PORT_PYCR); + ctrl_outw(ctrl_inw(PORT_PZCR) & ~0x0ff0, PORT_PZCR); + ctrl_outw(ctrl_inw(PORT_PSELA) & ~0x4100, PORT_PSELA); + ctrl_outw(ctrl_inw(PORT_HIZCRA) & ~0x4000, PORT_HIZCRA); + ctrl_outw(ctrl_inw(PORT_HIZCRC) & ~0xc000, PORT_HIZCRC); + + /* NAND Flash */ + ctrl_outw(ctrl_inw(PORT_PXCR) & 0x0fff, PORT_PXCR); + ctrl_outl((ctrl_inl(BSC_CS6ABCR) & ~0x00000600) | 0x00000200, + BSC_CS6ABCR); + + /* Touch Panel - Enable IRQ6 */ + ctrl_outw(ctrl_inw(PORT_PZCR) & ~0xc, PORT_PZCR); + ctrl_outw((ctrl_inw(PORT_PSELA) | 0x8000), PORT_PSELA); + ctrl_outw((ctrl_inw(PORT_HIZCRC) & ~0x4000), PORT_HIZCRC); + +#ifdef CONFIG_SH_MIGOR_RTA_WVGA + /* LCDC - WVGA - Enable RGB Interface signals */ + ctrl_outw(ctrl_inw(PORT_PACR) & ~0x0003, PORT_PACR); + ctrl_outw(0x0000, PORT_PHCR); + ctrl_outw(0x0000, PORT_PLCR); + ctrl_outw(0x0000, PORT_PMCR); + ctrl_outw(ctrl_inw(PORT_PRCR) & ~0x000f, PORT_PRCR); + ctrl_outw((ctrl_inw(PORT_PSELD) & ~0x000d) | 0x0400, PORT_PSELD); + ctrl_outw(ctrl_inw(PORT_MSELCRB) & ~0x0100, PORT_MSELCRB); + ctrl_outw(ctrl_inw(PORT_HIZCRA) & ~0x01e0, PORT_HIZCRA); +#endif +#ifdef CONFIG_SH_MIGOR_QVGA + /* LCDC - QVGA - Enable SYS Interface signals */ + ctrl_outw(ctrl_inw(PORT_PACR) & ~0x0003, PORT_PACR); + ctrl_outw((ctrl_inw(PORT_PHCR) & ~0xcfff) | 0x0010, PORT_PHCR); + ctrl_outw(0x0000, PORT_PLCR); + ctrl_outw(0x0000, PORT_PMCR); + ctrl_outw(ctrl_inw(PORT_PRCR) & ~0x030f, PORT_PRCR); + ctrl_outw((ctrl_inw(PORT_PSELD) & ~0x0001) | 0x0420, PORT_PSELD); + ctrl_outw(ctrl_inw(PORT_MSELCRB) | 0x0100, PORT_MSELCRB); + ctrl_outw(ctrl_inw(PORT_HIZCRA) & ~0x01e0, PORT_HIZCRA); +#endif + + /* CEU */ + ctrl_outw((ctrl_inw(PORT_PTCR) & ~0x03c3) | 0x0051, PORT_PTCR); + ctrl_outw(ctrl_inw(PORT_PUCR) & ~0x03ff, PORT_PUCR); + ctrl_outw(ctrl_inw(PORT_PVCR) & ~0x03ff, PORT_PVCR); + ctrl_outw(ctrl_inw(PORT_PWCR) & ~0x3c00, PORT_PWCR); + ctrl_outw(ctrl_inw(PORT_PSELC) | 0x0001, PORT_PSELC); + ctrl_outw(ctrl_inw(PORT_PSELD) & ~0x2000, PORT_PSELD); + ctrl_outw(ctrl_inw(PORT_PSELE) | 0x000f, PORT_PSELE); + ctrl_outw(ctrl_inw(PORT_MSELCRB) | 0x2200, PORT_MSELCRB); + ctrl_outw(ctrl_inw(PORT_HIZCRA) & ~0x0a00, PORT_HIZCRA); + ctrl_outw(ctrl_inw(PORT_HIZCRB) & ~0x0003, PORT_HIZCRB); +} + +static struct sh_machine_vector mv_migor __initmv = { + .mv_name = "Migo-R", + .mv_setup = migor_setup, +}; diff --git a/arch/sh/boards/renesas/rts7751r2d/Kconfig b/arch/sh/boards/mach-r2d/Kconfig index 8122a9667fc9..8122a9667fc9 100644 --- a/arch/sh/boards/renesas/rts7751r2d/Kconfig +++ b/arch/sh/boards/mach-r2d/Kconfig diff --git a/arch/sh/boards/renesas/rts7751r2d/Makefile b/arch/sh/boards/mach-r2d/Makefile index 0d4c75a72be0..0d4c75a72be0 100644 --- a/arch/sh/boards/renesas/rts7751r2d/Makefile +++ b/arch/sh/boards/mach-r2d/Makefile diff --git a/arch/sh/boards/renesas/rts7751r2d/irq.c b/arch/sh/boards/mach-r2d/irq.c index 8e49f6e51247..8e49f6e51247 100644 --- a/arch/sh/boards/renesas/rts7751r2d/irq.c +++ b/arch/sh/boards/mach-r2d/irq.c diff --git a/arch/sh/boards/renesas/rts7751r2d/setup.c b/arch/sh/boards/mach-r2d/setup.c index 2308e8753bcd..2308e8753bcd 100644 --- a/arch/sh/boards/renesas/rts7751r2d/setup.c +++ b/arch/sh/boards/mach-r2d/setup.c diff --git a/arch/sh/boards/renesas/sdk7780/Kconfig b/arch/sh/boards/mach-sdk7780/Kconfig index 065f1df09bf1..065f1df09bf1 100644 --- a/arch/sh/boards/renesas/sdk7780/Kconfig +++ b/arch/sh/boards/mach-sdk7780/Kconfig diff --git a/arch/sh/boards/renesas/sdk7780/Makefile b/arch/sh/boards/mach-sdk7780/Makefile index 3d8f0befc35d..3d8f0befc35d 100644 --- a/arch/sh/boards/renesas/sdk7780/Makefile +++ b/arch/sh/boards/mach-sdk7780/Makefile diff --git a/arch/sh/boards/renesas/sdk7780/irq.c b/arch/sh/boards/mach-sdk7780/irq.c index 87cdc578f6ff..87cdc578f6ff 100644 --- a/arch/sh/boards/renesas/sdk7780/irq.c +++ b/arch/sh/boards/mach-sdk7780/irq.c diff --git a/arch/sh/boards/renesas/sdk7780/setup.c b/arch/sh/boards/mach-sdk7780/setup.c index acc5932587f1..acc5932587f1 100644 --- a/arch/sh/boards/renesas/sdk7780/setup.c +++ b/arch/sh/boards/mach-sdk7780/setup.c diff --git a/arch/sh/boards/se/7206/Makefile b/arch/sh/boards/mach-se/7206/Makefile index 63e7ed699f39..63e7ed699f39 100644 --- a/arch/sh/boards/se/7206/Makefile +++ b/arch/sh/boards/mach-se/7206/Makefile diff --git a/arch/sh/boards/se/7206/io.c b/arch/sh/boards/mach-se/7206/io.c index 1308e618e044..9c3a33210d61 100644 --- a/arch/sh/boards/se/7206/io.c +++ b/arch/sh/boards/mach-se/7206/io.c @@ -11,7 +11,7 @@ #include <linux/kernel.h> #include <linux/types.h> #include <asm/io.h> -#include <asm/se7206.h> +#include <mach-se/mach/se7206.h> static inline void delay(void) diff --git a/arch/sh/boards/se/7206/irq.c b/arch/sh/boards/mach-se/7206/irq.c index 9d5bfc77d0de..aef7f052851a 100644 --- a/arch/sh/boards/se/7206/irq.c +++ b/arch/sh/boards/mach-se/7206/irq.c @@ -10,7 +10,7 @@ #include <linux/irq.h> #include <linux/io.h> #include <linux/interrupt.h> -#include <asm/se7206.h> +#include <mach-se/mach/se7206.h> #define INTSTS0 0x31800000 #define INTSTS1 0x31800002 diff --git a/arch/sh/boards/se/7206/setup.c b/arch/sh/boards/mach-se/7206/setup.c index 4fe84cc08406..f5466384972e 100644 --- a/arch/sh/boards/se/7206/setup.c +++ b/arch/sh/boards/mach-se/7206/setup.c @@ -10,7 +10,7 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/smc91x.h> -#include <asm/se7206.h> +#include <mach-se/mach/se7206.h> #include <asm/io.h> #include <asm/machvec.h> #include <asm/heartbeat.h> diff --git a/arch/sh/boards/se/7343/Makefile b/arch/sh/boards/mach-se/7343/Makefile index 3024796c6203..3024796c6203 100644 --- a/arch/sh/boards/se/7343/Makefile +++ b/arch/sh/boards/mach-se/7343/Makefile diff --git a/arch/sh/boards/se/7343/io.c b/arch/sh/boards/mach-se/7343/io.c index 3a6d11424938..8741abc1da7b 100644 --- a/arch/sh/boards/se/7343/io.c +++ b/arch/sh/boards/mach-se/7343/io.c @@ -6,7 +6,7 @@ */ #include <linux/kernel.h> #include <asm/io.h> -#include <asm/mach/se7343.h> +#include <mach-se/mach/se7343.h> #define badio(fn, a) panic("bad i/o operation %s for %08lx.", #fn, a) diff --git a/arch/sh/boards/mach-se/7343/irq.c b/arch/sh/boards/mach-se/7343/irq.c new file mode 100644 index 000000000000..051c29d4eae0 --- /dev/null +++ b/arch/sh/boards/mach-se/7343/irq.c @@ -0,0 +1,79 @@ +/* + * linux/arch/sh/boards/se/7343/irq.c + * + * Copyright (C) 2008 Yoshihiro Shimoda + * + * Based on linux/arch/sh/boards/se/7722/irq.c + * Copyright (C) 2007 Nobuhiro Iwamatsu + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/init.h> +#include <linux/irq.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <mach-se/mach/se7343.h> + +static void disable_se7343_irq(unsigned int irq) +{ + unsigned int bit = irq - SE7343_FPGA_IRQ_BASE; + ctrl_outw(ctrl_inw(PA_CPLD_IMSK) | 1 << bit, PA_CPLD_IMSK); +} + +static void enable_se7343_irq(unsigned int irq) +{ + unsigned int bit = irq - SE7343_FPGA_IRQ_BASE; + ctrl_outw(ctrl_inw(PA_CPLD_IMSK) & ~(1 << bit), PA_CPLD_IMSK); +} + +static struct irq_chip se7343_irq_chip __read_mostly = { + .name = "SE7343-FPGA", + .mask = disable_se7343_irq, + .unmask = enable_se7343_irq, + .mask_ack = disable_se7343_irq, +}; + +static void se7343_irq_demux(unsigned int irq, struct irq_desc *desc) +{ + unsigned short intv = ctrl_inw(PA_CPLD_ST); + struct irq_desc *ext_desc; + unsigned int ext_irq = SE7343_FPGA_IRQ_BASE; + + intv &= (1 << SE7343_FPGA_IRQ_NR) - 1; + + while (intv) { + if (intv & 1) { + ext_desc = irq_desc + ext_irq; + handle_level_irq(ext_irq, ext_desc); + } + intv >>= 1; + ext_irq++; + } +} + +/* + * Initialize IRQ setting + */ +void __init init_7343se_IRQ(void) +{ + int i; + + ctrl_outw(0, PA_CPLD_IMSK); /* disable all irqs */ + ctrl_outw(0x2000, 0xb03fffec); /* mrshpc irq enable */ + + for (i = 0; i < SE7343_FPGA_IRQ_NR; i++) + set_irq_chip_and_handler_name(SE7343_FPGA_IRQ_BASE + i, + &se7343_irq_chip, + handle_level_irq, "level"); + + set_irq_chained_handler(IRQ0_IRQ, se7343_irq_demux); + set_irq_type(IRQ0_IRQ, IRQ_TYPE_LEVEL_LOW); + set_irq_chained_handler(IRQ1_IRQ, se7343_irq_demux); + set_irq_type(IRQ1_IRQ, IRQ_TYPE_LEVEL_LOW); + set_irq_chained_handler(IRQ4_IRQ, se7343_irq_demux); + set_irq_type(IRQ4_IRQ, IRQ_TYPE_LEVEL_LOW); + set_irq_chained_handler(IRQ5_IRQ, se7343_irq_demux); + set_irq_type(IRQ5_IRQ, IRQ_TYPE_LEVEL_LOW); +} diff --git a/arch/sh/boards/se/7343/setup.c b/arch/sh/boards/mach-se/7343/setup.c index c9431b3a051b..486f40bf9274 100644 --- a/arch/sh/boards/se/7343/setup.c +++ b/arch/sh/boards/mach-se/7343/setup.c @@ -1,10 +1,11 @@ #include <linux/init.h> #include <linux/platform_device.h> +#include <linux/mtd/physmap.h> #include <asm/machvec.h> -#include <asm/mach/se7343.h> +#include <mach-se/mach/se7343.h> +#include <asm/heartbeat.h> #include <asm/irq.h> - -void init_7343se_IRQ(void); +#include <asm/io.h> static struct resource smc91x_resources[] = { [0] = { @@ -17,8 +18,8 @@ static struct resource smc91x_resources[] = { * shared with other devices via externel * interrupt controller in FPGA... */ - .start = EXT_IRQ2, - .end = EXT_IRQ2, + .start = SMC_IRQ, + .end = SMC_IRQ, .flags = IORESOURCE_IRQ, }, }; @@ -38,16 +39,65 @@ static struct resource heartbeat_resources[] = { }, }; +static struct heartbeat_data heartbeat_data = { + .regsize = 16, +}; + static struct platform_device heartbeat_device = { .name = "heartbeat", .id = -1, + .dev = { + .platform_data = &heartbeat_data, + }, .num_resources = ARRAY_SIZE(heartbeat_resources), .resource = heartbeat_resources, }; +static struct mtd_partition nor_flash_partitions[] = { + { + .name = "loader", + .offset = 0x00000000, + .size = 128 * 1024, + }, + { + .name = "rootfs", + .offset = MTDPART_OFS_APPEND, + .size = 31 * 1024 * 1024, + }, + { + .name = "data", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct physmap_flash_data nor_flash_data = { + .width = 2, + .parts = nor_flash_partitions, + .nr_parts = ARRAY_SIZE(nor_flash_partitions), +}; + +static struct resource nor_flash_resources[] = { + [0] = { + .start = 0x00000000, + .end = 0x01ffffff, + .flags = IORESOURCE_MEM, + } +}; + +static struct platform_device nor_flash_device = { + .name = "physmap-flash", + .dev = { + .platform_data = &nor_flash_data, + }, + .num_resources = ARRAY_SIZE(nor_flash_resources), + .resource = nor_flash_resources, +}; + static struct platform_device *sh7343se_platform_devices[] __initdata = { &smc91x_device, &heartbeat_device, + &nor_flash_device, }; static int __init sh7343se_devices_setup(void) @@ -55,10 +105,19 @@ static int __init sh7343se_devices_setup(void) return platform_add_devices(sh7343se_platform_devices, ARRAY_SIZE(sh7343se_platform_devices)); } +device_initcall(sh7343se_devices_setup); +/* + * Initialize the board + */ static void __init sh7343se_setup(char **cmdline_p) { - device_initcall(sh7343se_devices_setup); + ctrl_outw(0xf900, FPGA_OUT); /* FPGA */ + + ctrl_outw(0x0002, PORT_PECR); /* PORT E 1 = IRQ5 */ + ctrl_outw(0x0020, PORT_PSELD); + + printk(KERN_INFO "MS7343CP01 Setup...done\n"); } /* @@ -90,5 +149,4 @@ static struct sh_machine_vector mv_7343se __initmv = { .mv_outsl = sh7343se_outsl, .mv_init_irq = init_7343se_IRQ, - .mv_irq_demux = shmse_irq_demux, }; diff --git a/arch/sh/boards/se/770x/Makefile b/arch/sh/boards/mach-se/770x/Makefile index 8e624b06d5ea..8e624b06d5ea 100644 --- a/arch/sh/boards/se/770x/Makefile +++ b/arch/sh/boards/mach-se/770x/Makefile diff --git a/arch/sh/boards/se/770x/io.c b/arch/sh/boards/mach-se/770x/io.c index c4550473d4c3..28833c8786ea 100644 --- a/arch/sh/boards/se/770x/io.c +++ b/arch/sh/boards/mach-se/770x/io.c @@ -1,24 +1,12 @@ -/* $Id: io.c,v 1.7 2006/02/05 21:55:29 lethal Exp $ - * - * linux/arch/sh/kernel/io_se.c - * +/* * Copyright (C) 2000 Kazumoto Kojima * * I/O routine for Hitachi SolutionEngine. - * */ - #include <linux/kernel.h> #include <linux/types.h> #include <asm/io.h> -#include <asm/se.h> - -/* SH pcmcia io window base, start and end. */ -int sh_pcic_io_wbase = 0xb8400000; -int sh_pcic_io_start; -int sh_pcic_io_stop; -int sh_pcic_io_type; -int sh_pcic_io_dummy; +#include <mach-se/mach/se.h> /* MS7750 requires special versions of in*, out* routines, since PC-like io ports are located at upper half byte of 16-bit word which @@ -33,8 +21,6 @@ port2adr(unsigned int port) return (volatile __u16 *) (PA_MRSHPC + (port - 0x2000)); else if (port >= 0x1000) return (volatile __u16 *) (PA_83902 + (port << 1)); - else if (sh_pcic_io_start <= port && port <= sh_pcic_io_stop) - return (volatile __u16 *) (sh_pcic_io_wbase + (port &~ 1)); else return (volatile __u16 *) (PA_SUPERIO + (port << 1)); } @@ -51,32 +37,27 @@ shifted_port(unsigned long port) unsigned char se_inb(unsigned long port) { - if (sh_pcic_io_start <= port && port <= sh_pcic_io_stop) - return *(__u8 *) (sh_pcic_io_wbase + 0x40000 + port); - else if (shifted_port(port)) - return (*port2adr(port) >> 8); + if (shifted_port(port)) + return (*port2adr(port) >> 8); else - return (*port2adr(port))&0xff; + return (*port2adr(port))&0xff; } unsigned char se_inb_p(unsigned long port) { unsigned long v; - if (sh_pcic_io_start <= port && port <= sh_pcic_io_stop) - v = *(__u8 *) (sh_pcic_io_wbase + 0x40000 + port); - else if (shifted_port(port)) - v = (*port2adr(port) >> 8); + if (shifted_port(port)) + v = (*port2adr(port) >> 8); else - v = (*port2adr(port))&0xff; + v = (*port2adr(port))&0xff; ctrl_delay(); return v; } unsigned short se_inw(unsigned long port) { - if (port >= 0x2000 || - (sh_pcic_io_start <= port && port <= sh_pcic_io_stop)) + if (port >= 0x2000) return *port2adr(port); else maybebadio(port); @@ -91,9 +72,7 @@ unsigned int se_inl(unsigned long port) void se_outb(unsigned char value, unsigned long port) { - if (sh_pcic_io_start <= port && port <= sh_pcic_io_stop) - *(__u8 *)(sh_pcic_io_wbase + port) = value; - else if (shifted_port(port)) + if (shifted_port(port)) *(port2adr(port)) = value << 8; else *(port2adr(port)) = value; @@ -101,9 +80,7 @@ void se_outb(unsigned char value, unsigned long port) void se_outb_p(unsigned char value, unsigned long port) { - if (sh_pcic_io_start <= port && port <= sh_pcic_io_stop) - *(__u8 *)(sh_pcic_io_wbase + port) = value; - else if (shifted_port(port)) + if (shifted_port(port)) *(port2adr(port)) = value << 8; else *(port2adr(port)) = value; @@ -112,8 +89,7 @@ void se_outb_p(unsigned char value, unsigned long port) void se_outw(unsigned short value, unsigned long port) { - if (port >= 0x2000 || - (sh_pcic_io_start <= port && port <= sh_pcic_io_stop)) + if (port >= 0x2000) *port2adr(port) = value; else maybebadio(port); @@ -129,11 +105,7 @@ void se_insb(unsigned long port, void *addr, unsigned long count) volatile __u16 *p = port2adr(port); __u8 *ap = addr; - if (sh_pcic_io_start <= port && port <= sh_pcic_io_stop) { - volatile __u8 *bp = (__u8 *) (sh_pcic_io_wbase + 0x40000 + port); - while (count--) - *ap++ = *bp; - } else if (shifted_port(port)) { + if (shifted_port(port)) { while (count--) *ap++ = *p >> 8; } else { @@ -160,11 +132,7 @@ void se_outsb(unsigned long port, const void *addr, unsigned long count) volatile __u16 *p = port2adr(port); const __u8 *ap = addr; - if (sh_pcic_io_start <= port && port <= sh_pcic_io_stop) { - volatile __u8 *bp = (__u8 *) (sh_pcic_io_wbase + port); - while (count--) - *bp = *ap++; - } else if (shifted_port(port)) { + if (shifted_port(port)) { while (count--) *p = *ap++ << 8; } else { @@ -177,6 +145,7 @@ void se_outsw(unsigned long port, const void *addr, unsigned long count) { volatile __u16 *p = port2adr(port); const __u16 *ap = addr; + while (count--) *p = *ap++; } diff --git a/arch/sh/boards/se/770x/irq.c b/arch/sh/boards/mach-se/770x/irq.c index cdb0807928a5..ec1fea571b52 100644 --- a/arch/sh/boards/se/770x/irq.c +++ b/arch/sh/boards/mach-se/770x/irq.c @@ -13,7 +13,7 @@ #include <linux/irq.h> #include <asm/irq.h> #include <asm/io.h> -#include <asm/se.h> +#include <mach-se/mach/se.h> static struct ipr_data ipr_irq_table[] = { /* diff --git a/arch/sh/boards/se/770x/setup.c b/arch/sh/boards/mach-se/770x/setup.c index 318bc8a3969c..9123d9687bf7 100644 --- a/arch/sh/boards/se/770x/setup.c +++ b/arch/sh/boards/mach-se/770x/setup.c @@ -9,13 +9,11 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <asm/machvec.h> -#include <asm/se.h> +#include <mach-se/mach/se.h> #include <asm/io.h> #include <asm/smc37c93x.h> #include <asm/heartbeat.h> -void init_se_IRQ(void); - /* * Configure the Super I/O chip */ @@ -73,7 +71,7 @@ static struct resource cf_ide_resources[] = { }, [1] = { .start = PA_MRSHPC_IO + 0x1f0 + 0x206, - .end = PA_MRSHPC_IO + 0x1f0 +8 + 0x206 + 8, + .end = PA_MRSHPC_IO + 0x1f0 + 8 + 0x206 + 8, .flags = IORESOURCE_MEM, }, [2] = { @@ -115,9 +113,64 @@ static struct platform_device heartbeat_device = { .resource = heartbeat_resources, }; +#if defined(CONFIG_CPU_SUBTYPE_SH7710) ||\ + defined(CONFIG_CPU_SUBTYPE_SH7712) +/* SH771X Ethernet driver */ +static struct resource sh_eth0_resources[] = { + [0] = { + .start = SH_ETH0_BASE, + .end = SH_ETH0_BASE + 0x1B8, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = SH_ETH0_IRQ, + .end = SH_ETH0_IRQ, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device sh_eth0_device = { + .name = "sh-eth", + .id = 0, + .dev = { + .platform_data = PHY_ID, + }, + .num_resources = ARRAY_SIZE(sh_eth0_resources), + .resource = sh_eth0_resources, +}; + +static struct resource sh_eth1_resources[] = { + [0] = { + .start = SH_ETH1_BASE, + .end = SH_ETH1_BASE + 0x1B8, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = SH_ETH1_IRQ, + .end = SH_ETH1_IRQ, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device sh_eth1_device = { + .name = "sh-eth", + .id = 1, + .dev = { + .platform_data = PHY_ID, + }, + .num_resources = ARRAY_SIZE(sh_eth1_resources), + .resource = sh_eth1_resources, +}; +#endif + static struct platform_device *se_devices[] __initdata = { &heartbeat_device, &cf_ide_device, +#if defined(CONFIG_CPU_SUBTYPE_SH7710) ||\ + defined(CONFIG_CPU_SUBTYPE_SH7712) + &sh_eth0_device, + &sh_eth1_device, +#endif }; static int __init se_devices_setup(void) diff --git a/arch/sh/boards/se/7721/Makefile b/arch/sh/boards/mach-se/7721/Makefile index 7f09030980b3..7f09030980b3 100644 --- a/arch/sh/boards/se/7721/Makefile +++ b/arch/sh/boards/mach-se/7721/Makefile diff --git a/arch/sh/boards/se/7721/irq.c b/arch/sh/boards/mach-se/7721/irq.c index c4fdd622bf8b..b417acc4dad0 100644 --- a/arch/sh/boards/se/7721/irq.c +++ b/arch/sh/boards/mach-se/7721/irq.c @@ -11,7 +11,7 @@ #include <linux/irq.h> #include <linux/interrupt.h> #include <linux/io.h> -#include <asm/se7721.h> +#include <mach-se/mach/se7721.h> enum { UNUSED = 0, diff --git a/arch/sh/boards/se/7721/setup.c b/arch/sh/boards/mach-se/7721/setup.c index 1be3e92752f7..d3fc80ff4d83 100644 --- a/arch/sh/boards/se/7721/setup.c +++ b/arch/sh/boards/mach-se/7721/setup.c @@ -13,7 +13,7 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <asm/machvec.h> -#include <asm/se7721.h> +#include <mach-se/mach/se7721.h> #include <asm/io.h> #include <asm/heartbeat.h> diff --git a/arch/sh/boards/se/7722/Makefile b/arch/sh/boards/mach-se/7722/Makefile index 8694373389e5..8694373389e5 100644 --- a/arch/sh/boards/se/7722/Makefile +++ b/arch/sh/boards/mach-se/7722/Makefile diff --git a/arch/sh/boards/se/7722/irq.c b/arch/sh/boards/mach-se/7722/irq.c index 0b03f3f610b8..02d21a3e2a8f 100644 --- a/arch/sh/boards/se/7722/irq.c +++ b/arch/sh/boards/mach-se/7722/irq.c @@ -14,7 +14,7 @@ #include <linux/interrupt.h> #include <asm/irq.h> #include <asm/io.h> -#include <asm/se7722.h> +#include <mach-se/mach/se7722.h> static void disable_se7722_irq(unsigned int irq) { diff --git a/arch/sh/boards/se/7722/setup.c b/arch/sh/boards/mach-se/7722/setup.c index ede3957fc14a..fe6f96517e12 100644 --- a/arch/sh/boards/se/7722/setup.c +++ b/arch/sh/boards/mach-se/7722/setup.c @@ -16,7 +16,8 @@ #include <linux/input.h> #include <linux/smc91x.h> #include <asm/machvec.h> -#include <asm/se7722.h> +#include <asm/clock.h> +#include <mach-se/mach/se7722.h> #include <asm/io.h> #include <asm/heartbeat.h> #include <asm/sh_keysc.h> @@ -145,6 +146,8 @@ static struct platform_device *se7722_devices[] __initdata = { static int __init se7722_devices_setup(void) { + clk_always_enable("mstp214"); /* KEYSC */ + return platform_add_devices(se7722_devices, ARRAY_SIZE(se7722_devices)); } @@ -154,11 +157,6 @@ static void __init se7722_setup(char **cmdline_p) { ctrl_outw(0x010D, FPGA_OUT); /* FPGA */ - ctrl_outl(0x00051001, MSTPCR0); - ctrl_outl(0x00000000, MSTPCR1); - /* KEYSC, VOU, BEU, CEU, VEU, VPU, LCDC, USB */ - ctrl_outl(0xffffb7c0, MSTPCR2); - ctrl_outw(0x0000, PORT_PECR); /* PORT E 1 = IRQ5 ,E 0 = BS */ ctrl_outw(0x1000, PORT_PJCR); /* PORT J 1 = IRQ1,J 0 =IRQ0 */ diff --git a/arch/sh/boards/se/7751/Makefile b/arch/sh/boards/mach-se/7751/Makefile index dbc29f3a9de5..dbc29f3a9de5 100644 --- a/arch/sh/boards/se/7751/Makefile +++ b/arch/sh/boards/mach-se/7751/Makefile diff --git a/arch/sh/boards/se/7751/io.c b/arch/sh/boards/mach-se/7751/io.c index e8d846cec89d..6287ae570319 100644 --- a/arch/sh/boards/se/7751/io.c +++ b/arch/sh/boards/mach-se/7751/io.c @@ -12,7 +12,7 @@ #include <linux/types.h> #include <linux/pci.h> #include <asm/io.h> -#include <asm/se7751.h> +#include <mach-se/mach/se7751.h> #include <asm/addrspace.h> static inline volatile u16 *port2adr(unsigned int port) diff --git a/arch/sh/boards/se/7751/irq.c b/arch/sh/boards/mach-se/7751/irq.c index c3d12590e5db..5c9847ea1e7c 100644 --- a/arch/sh/boards/se/7751/irq.c +++ b/arch/sh/boards/mach-se/7751/irq.c @@ -12,7 +12,7 @@ #include <linux/init.h> #include <linux/irq.h> #include <asm/irq.h> -#include <asm/se7751.h> +#include <mach-se/mach/se7751.h> static struct ipr_data ipr_irq_table[] = { { 13, 3, 3, 2 }, diff --git a/arch/sh/boards/se/7751/pci.c b/arch/sh/boards/mach-se/7751/pci.c index 203b2923fe7f..203b2923fe7f 100644 --- a/arch/sh/boards/se/7751/pci.c +++ b/arch/sh/boards/mach-se/7751/pci.c diff --git a/arch/sh/boards/se/7751/setup.c b/arch/sh/boards/mach-se/7751/setup.c index deefbfd92591..50572512e3e8 100644 --- a/arch/sh/boards/se/7751/setup.c +++ b/arch/sh/boards/mach-se/7751/setup.c @@ -11,7 +11,7 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <asm/machvec.h> -#include <asm/se7751.h> +#include <mach-se/mach/se7751.h> #include <asm/io.h> #include <asm/heartbeat.h> diff --git a/arch/sh/boards/se/7780/Makefile b/arch/sh/boards/mach-se/7780/Makefile index 6b88adae3ecc..6b88adae3ecc 100644 --- a/arch/sh/boards/se/7780/Makefile +++ b/arch/sh/boards/mach-se/7780/Makefile diff --git a/arch/sh/boards/se/7780/irq.c b/arch/sh/boards/mach-se/7780/irq.c index 6bd70da6bb47..66ad292c9fc3 100644 --- a/arch/sh/boards/se/7780/irq.c +++ b/arch/sh/boards/mach-se/7780/irq.c @@ -14,7 +14,7 @@ #include <linux/interrupt.h> #include <asm/irq.h> #include <asm/io.h> -#include <asm/se7780.h> +#include <mach-se/mach/se7780.h> /* * Initialize IRQ setting diff --git a/arch/sh/boards/se/7780/setup.c b/arch/sh/boards/mach-se/7780/setup.c index 0f08ab3b2bec..1d3a867e94e3 100644 --- a/arch/sh/boards/se/7780/setup.c +++ b/arch/sh/boards/mach-se/7780/setup.c @@ -12,7 +12,7 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <asm/machvec.h> -#include <asm/se7780.h> +#include <mach-se/mach/se7780.h> #include <asm/io.h> #include <asm/heartbeat.h> diff --git a/arch/sh/boards/mach-se/Makefile b/arch/sh/boards/mach-se/Makefile new file mode 100644 index 000000000000..2de42bae4b4f --- /dev/null +++ b/arch/sh/boards/mach-se/Makefile @@ -0,0 +1,9 @@ +obj-$(CONFIG_SH_7619_SOLUTION_ENGINE) += board-se7619.o + +obj-$(CONFIG_SH_SOLUTION_ENGINE) += 770x/ +obj-$(CONFIG_SH_7206_SOLUTION_ENGINE) += 7206/ +obj-$(CONFIG_SH_7722_SOLUTION_ENGINE) += 7722/ +obj-$(CONFIG_SH_7751_SOLUTION_ENGINE) += 7751/ +obj-$(CONFIG_SH_7780_SOLUTION_ENGINE) += 7780/ +obj-$(CONFIG_SH_7343_SOLUTION_ENGINE) += 7343/ +obj-$(CONFIG_SH_7721_SOLUTION_ENGINE) += 7721/ diff --git a/arch/sh/boards/se/7619/setup.c b/arch/sh/boards/mach-se/board-se7619.c index 1d0ef7faa10d..1d0ef7faa10d 100644 --- a/arch/sh/boards/se/7619/setup.c +++ b/arch/sh/boards/mach-se/board-se7619.c diff --git a/arch/sh/boards/sh03/Makefile b/arch/sh/boards/mach-sh03/Makefile index 400306a796ec..400306a796ec 100644 --- a/arch/sh/boards/sh03/Makefile +++ b/arch/sh/boards/mach-sh03/Makefile diff --git a/arch/sh/boards/sh03/rtc.c b/arch/sh/boards/mach-sh03/rtc.c index 0a9266bb51c5..0a9266bb51c5 100644 --- a/arch/sh/boards/sh03/rtc.c +++ b/arch/sh/boards/mach-sh03/rtc.c diff --git a/arch/sh/boards/sh03/setup.c b/arch/sh/boards/mach-sh03/setup.c index 934ac4f1c48f..5771219be3fd 100644 --- a/arch/sh/boards/sh03/setup.c +++ b/arch/sh/boards/mach-sh03/setup.c @@ -11,8 +11,8 @@ #include <linux/platform_device.h> #include <asm/io.h> #include <asm/rtc.h> -#include <asm/sh03/io.h> -#include <asm/sh03/sh03.h> +#include <mach-sh03/mach/io.h> +#include <mach-sh03/mach/sh03.h> #include <asm/addrspace.h> static void __init init_sh03_IRQ(void) diff --git a/arch/sh/boards/mach-sh7763rdp/Makefile b/arch/sh/boards/mach-sh7763rdp/Makefile new file mode 100644 index 000000000000..f6c0b55516d2 --- /dev/null +++ b/arch/sh/boards/mach-sh7763rdp/Makefile @@ -0,0 +1 @@ +obj-y := setup.o irq.o diff --git a/arch/sh/boards/mach-sh7763rdp/irq.c b/arch/sh/boards/mach-sh7763rdp/irq.c new file mode 100644 index 000000000000..fd850bad2dec --- /dev/null +++ b/arch/sh/boards/mach-sh7763rdp/irq.c @@ -0,0 +1,45 @@ +/* + * linux/arch/sh/boards/renesas/sh7763rdp/irq.c + * + * Renesas Solutions SH7763RDP Support. + * + * Copyright (C) 2008 Renesas Solutions Corp. + * Copyright (C) 2008 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include <linux/init.h> +#include <linux/irq.h> +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/sh7763rdp.h> + +#define INTC_BASE (0xFFD00000) +#define INTC_INT2PRI7 (INTC_BASE+0x4001C) +#define INTC_INT2MSKCR (INTC_BASE+0x4003C) +#define INTC_INT2MSKCR1 (INTC_BASE+0x400D4) + +/* + * Initialize IRQ setting + */ +void __init init_sh7763rdp_IRQ(void) +{ + /* GPIO enabled */ + ctrl_outl(1 << 25, INTC_INT2MSKCR); + + /* enable GPIO interrupts */ + ctrl_outl((ctrl_inl(INTC_INT2PRI7) & 0xFF00FFFF) | 0x000F0000, + INTC_INT2PRI7); + + /* USBH enabled */ + ctrl_outl(1 << 17, INTC_INT2MSKCR1); + + /* GETHER enabled */ + ctrl_outl(1 << 16, INTC_INT2MSKCR1); + + /* DMAC enabled */ + ctrl_outl(1 << 8, INTC_INT2MSKCR); +} diff --git a/arch/sh/boards/mach-sh7763rdp/setup.c b/arch/sh/boards/mach-sh7763rdp/setup.c new file mode 100644 index 000000000000..925f16af7121 --- /dev/null +++ b/arch/sh/boards/mach-sh7763rdp/setup.c @@ -0,0 +1,128 @@ +/* + * linux/arch/sh/boards/renesas/sh7763rdp/setup.c + * + * Renesas Solutions sh7763rdp board + * + * Copyright (C) 2008 Renesas Solutions Corp. + * Copyright (C) 2008 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/interrupt.h> +#include <linux/input.h> +#include <linux/mtd/physmap.h> +#include <asm/io.h> +#include <asm/sh7763rdp.h> + +/* NOR Flash */ +static struct mtd_partition sh7763rdp_nor_flash_partitions[] = { + { + .name = "U-Boot", + .offset = 0, + .size = (2 * 128 * 1024), + .mask_flags = MTD_WRITEABLE, /* Read-only */ + }, { + .name = "Linux-Kernel", + .offset = MTDPART_OFS_APPEND, + .size = (20 * 128 * 1024), + }, { + .name = "Root Filesystem", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct physmap_flash_data sh7763rdp_nor_flash_data = { + .width = 2, + .parts = sh7763rdp_nor_flash_partitions, + .nr_parts = ARRAY_SIZE(sh7763rdp_nor_flash_partitions), +}; + +static struct resource sh7763rdp_nor_flash_resources[] = { + [0] = { + .name = "NOR Flash", + .start = 0, + .end = (64 * 1024 * 1024), + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device sh7763rdp_nor_flash_device = { + .name = "physmap-flash", + .resource = sh7763rdp_nor_flash_resources, + .num_resources = ARRAY_SIZE(sh7763rdp_nor_flash_resources), + .dev = { + .platform_data = &sh7763rdp_nor_flash_data, + }, +}; + +static struct platform_device *sh7763rdp_devices[] __initdata = { + &sh7763rdp_nor_flash_device, +}; + +static int __init sh7763rdp_devices_setup(void) +{ + return platform_add_devices(sh7763rdp_devices, + ARRAY_SIZE(sh7763rdp_devices)); +} +__initcall(sh7763rdp_devices_setup); + +static void __init sh7763rdp_setup(char **cmdline_p) +{ + /* Board version check */ + if (ctrl_inw(CPLD_BOARD_ID_ERV_REG) == 0xECB1) + printk(KERN_INFO "RTE Standard Configuration\n"); + else + printk(KERN_INFO "RTA Standard Configuration\n"); + + /* USB pin select bits (clear bit 5-2 to 0) */ + ctrl_outw((ctrl_inw(PORT_PSEL2) & 0xFFC3), PORT_PSEL2); + /* USBH setup port I controls to other (clear bits 4-9 to 0) */ + ctrl_outw(ctrl_inw(PORT_PICR) & 0xFC0F, PORT_PICR); + + /* Select USB Host controller */ + ctrl_outw(0x00, USB_USBHSC); + + /* For LCD */ + /* set PTJ7-1, bits 15-2 of PJCR to 0 */ + ctrl_outw(ctrl_inw(PORT_PJCR) & 0x0003, PORT_PJCR); + /* set PTI5, bits 11-10 of PICR to 0 */ + ctrl_outw(ctrl_inw(PORT_PICR) & 0xF3FF, PORT_PICR); + ctrl_outw(0, PORT_PKCR); + ctrl_outw(0, PORT_PLCR); + /* set PSEL2 bits 14-8, 5-4, of PSEL2 to 0 */ + ctrl_outw((ctrl_inw(PORT_PSEL2) & 0x00C0), PORT_PSEL2); + /* set PSEL3 bits 14-12, 6-4, 2-0 of PSEL3 to 0 */ + ctrl_outw((ctrl_inw(PORT_PSEL3) & 0x0700), PORT_PSEL3); + + /* For HAC */ + /* bit3-0 0100:HAC & SSI1 enable */ + ctrl_outw((ctrl_inw(PORT_PSEL1) & 0xFFF0) | 0x0004, PORT_PSEL1); + /* bit14 1:SSI_HAC_CLK enable */ + ctrl_outw(ctrl_inw(PORT_PSEL4) | 0x4000, PORT_PSEL4); + + /* SH-Ether */ + ctrl_outw((ctrl_inw(PORT_PSEL1) & ~0xff00) | 0x2400, PORT_PSEL1); + ctrl_outw(0x0, PORT_PFCR); + ctrl_outw(0x0, PORT_PFCR); + ctrl_outw(0x0, PORT_PFCR); + + /* MMC */ + /*selects SCIF and MMC other functions */ + ctrl_outw(0x0001, PORT_PSEL0); + /* MMC clock operates */ + ctrl_outl(ctrl_inl(MSTPCR1) & ~0x8, MSTPCR1); + ctrl_outw(ctrl_inw(PORT_PACR) & ~0x3000, PORT_PACR); + ctrl_outw(ctrl_inw(PORT_PCCR) & ~0xCFC3, PORT_PCCR); +} + +static struct sh_machine_vector mv_sh7763rdp __initmv = { + .mv_name = "sh7763drp", + .mv_setup = sh7763rdp_setup, + .mv_nr_irqs = 112, + .mv_init_irq = init_sh7763rdp_IRQ, +}; diff --git a/arch/sh/boards/snapgear/Makefile b/arch/sh/boards/mach-snapgear/Makefile index d2d2f4b6a502..d2d2f4b6a502 100644 --- a/arch/sh/boards/snapgear/Makefile +++ b/arch/sh/boards/mach-snapgear/Makefile diff --git a/arch/sh/boards/snapgear/io.c b/arch/sh/boards/mach-snapgear/io.c index 0f4824264557..0f4824264557 100644 --- a/arch/sh/boards/snapgear/io.c +++ b/arch/sh/boards/mach-snapgear/io.c diff --git a/arch/sh/boards/snapgear/setup.c b/arch/sh/boards/mach-snapgear/setup.c index 7022483f98e8..a5e349d3dda2 100644 --- a/arch/sh/boards/snapgear/setup.c +++ b/arch/sh/boards/mach-snapgear/setup.c @@ -22,7 +22,7 @@ #include <asm/snapgear.h> #include <asm/irq.h> #include <asm/io.h> -#include <asm/cpu/timer.h> +#include <cpu/timer.h> /* * EraseConfig handling functions diff --git a/arch/sh/boards/renesas/systemh/Makefile b/arch/sh/boards/mach-systemh/Makefile index 2cc6a23d9d39..2cc6a23d9d39 100644 --- a/arch/sh/boards/renesas/systemh/Makefile +++ b/arch/sh/boards/mach-systemh/Makefile diff --git a/arch/sh/boards/renesas/systemh/io.c b/arch/sh/boards/mach-systemh/io.c index 1b767e1a1428..1b767e1a1428 100644 --- a/arch/sh/boards/renesas/systemh/io.c +++ b/arch/sh/boards/mach-systemh/io.c diff --git a/arch/sh/boards/renesas/systemh/irq.c b/arch/sh/boards/mach-systemh/irq.c index 0ba2fe674c47..601c9c8cdbec 100644 --- a/arch/sh/boards/renesas/systemh/irq.c +++ b/arch/sh/boards/mach-systemh/irq.c @@ -11,9 +11,8 @@ #include <linux/init.h> #include <linux/irq.h> +#include <linux/interrupt.h> -#include <linux/hdreg.h> -#include <linux/ide.h> #include <asm/io.h> #include <asm/systemh7751.h> #include <asm/smc37c93x.h> diff --git a/arch/sh/boards/renesas/systemh/setup.c b/arch/sh/boards/mach-systemh/setup.c index ee78af842778..ee78af842778 100644 --- a/arch/sh/boards/renesas/systemh/setup.c +++ b/arch/sh/boards/mach-systemh/setup.c diff --git a/arch/sh/boards/titan/Makefile b/arch/sh/boards/mach-titan/Makefile index 08d753700062..08d753700062 100644 --- a/arch/sh/boards/titan/Makefile +++ b/arch/sh/boards/mach-titan/Makefile diff --git a/arch/sh/boards/titan/io.c b/arch/sh/boards/mach-titan/io.c index 4730c1dd697d..4730c1dd697d 100644 --- a/arch/sh/boards/titan/io.c +++ b/arch/sh/boards/mach-titan/io.c diff --git a/arch/sh/boards/titan/setup.c b/arch/sh/boards/mach-titan/setup.c index 5de3b2ad71af..5de3b2ad71af 100644 --- a/arch/sh/boards/titan/setup.c +++ b/arch/sh/boards/mach-titan/setup.c diff --git a/arch/sh/boards/renesas/x3proto/Makefile b/arch/sh/boards/mach-x3proto/Makefile index 983e4551fecf..983e4551fecf 100644 --- a/arch/sh/boards/renesas/x3proto/Makefile +++ b/arch/sh/boards/mach-x3proto/Makefile diff --git a/arch/sh/boards/renesas/x3proto/ilsel.c b/arch/sh/boards/mach-x3proto/ilsel.c index b5c673c39337..b5c673c39337 100644 --- a/arch/sh/boards/renesas/x3proto/ilsel.c +++ b/arch/sh/boards/mach-x3proto/ilsel.c diff --git a/arch/sh/boards/renesas/x3proto/setup.c b/arch/sh/boards/mach-x3proto/setup.c index abc5b6d418fe..abc5b6d418fe 100644 --- a/arch/sh/boards/renesas/x3proto/setup.c +++ b/arch/sh/boards/mach-x3proto/setup.c diff --git a/arch/sh/boards/magicpanelr2/Kconfig b/arch/sh/boards/magicpanelr2/Kconfig deleted file mode 100644 index b0abddc3e84f..000000000000 --- a/arch/sh/boards/magicpanelr2/Kconfig +++ /dev/null @@ -1,13 +0,0 @@ -if SH_MAGIC_PANEL_R2 - -menu "Magic Panel R2 options" - -config SH_MAGIC_PANEL_R2_VERSION - int SH_MAGIC_PANEL_R2_VERSION - default "3" - help - Set the version of the Magic Panel R2 - -endmenu - -endif diff --git a/arch/sh/boards/magicpanelr2/Makefile b/arch/sh/boards/magicpanelr2/Makefile deleted file mode 100644 index 7a6d586b9072..000000000000 --- a/arch/sh/boards/magicpanelr2/Makefile +++ /dev/null @@ -1,5 +0,0 @@ -# -# Makefile for the Magic Panel specific parts -# - -obj-y := setup.o
\ No newline at end of file diff --git a/arch/sh/boards/renesas/migor/Makefile b/arch/sh/boards/renesas/migor/Makefile deleted file mode 100644 index 77037567633b..000000000000 --- a/arch/sh/boards/renesas/migor/Makefile +++ /dev/null @@ -1 +0,0 @@ -obj-y := setup.o diff --git a/arch/sh/boards/renesas/migor/setup.c b/arch/sh/boards/renesas/migor/setup.c deleted file mode 100644 index 01af44245b57..000000000000 --- a/arch/sh/boards/renesas/migor/setup.c +++ /dev/null @@ -1,258 +0,0 @@ -/* - * Renesas System Solutions Asia Pte. Ltd - Migo-R - * - * Copyright (C) 2008 Magnus Damm - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/interrupt.h> -#include <linux/input.h> -#include <linux/mtd/physmap.h> -#include <linux/mtd/nand.h> -#include <linux/i2c.h> -#include <linux/smc91x.h> -#include <asm/machvec.h> -#include <asm/io.h> -#include <asm/sh_keysc.h> -#include <asm/migor.h> - -/* Address IRQ Size Bus Description - * 0x00000000 64MB 16 NOR Flash (SP29PL256N) - * 0x0c000000 64MB 64 SDRAM (2xK4M563233G) - * 0x10000000 IRQ0 16 Ethernet (SMC91C111) - * 0x14000000 IRQ4 16 USB 2.0 Host Controller (M66596) - * 0x18000000 8GB 8 NAND Flash (K9K8G08U0A) - */ - -static struct smc91x_platdata smc91x_info = { - .flags = SMC91X_USE_16BIT, - .irq_flags = IRQF_TRIGGER_HIGH, -}; - -static struct resource smc91x_eth_resources[] = { - [0] = { - .name = "SMC91C111" , - .start = 0x10000300, - .end = 0x1000030f, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = 32, /* IRQ0 */ - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device smc91x_eth_device = { - .name = "smc91x", - .num_resources = ARRAY_SIZE(smc91x_eth_resources), - .resource = smc91x_eth_resources, - .dev = { - .platform_data = &smc91x_info, - }, -}; - -static struct sh_keysc_info sh_keysc_info = { - .mode = SH_KEYSC_MODE_2, /* KEYOUT0->4, KEYIN1->5 */ - .scan_timing = 3, - .delay = 5, - .keycodes = { - 0, KEY_UP, KEY_DOWN, KEY_LEFT, KEY_RIGHT, KEY_ENTER, - 0, KEY_F, KEY_C, KEY_D, KEY_H, KEY_1, - 0, KEY_2, KEY_3, KEY_4, KEY_5, KEY_6, - 0, KEY_7, KEY_8, KEY_9, KEY_S, KEY_0, - 0, KEY_P, KEY_STOP, KEY_REWIND, KEY_PLAY, KEY_FASTFORWARD, - }, -}; - -static struct resource sh_keysc_resources[] = { - [0] = { - .start = 0x044b0000, - .end = 0x044b000f, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = 79, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device sh_keysc_device = { - .name = "sh_keysc", - .num_resources = ARRAY_SIZE(sh_keysc_resources), - .resource = sh_keysc_resources, - .dev = { - .platform_data = &sh_keysc_info, - }, -}; - -static struct mtd_partition migor_nor_flash_partitions[] = -{ - { - .name = "uboot", - .offset = 0, - .size = (1 * 1024 * 1024), - .mask_flags = MTD_WRITEABLE, /* Read-only */ - }, - { - .name = "rootfs", - .offset = MTDPART_OFS_APPEND, - .size = (15 * 1024 * 1024), - }, - { - .name = "other", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - }, -}; - -static struct physmap_flash_data migor_nor_flash_data = { - .width = 2, - .parts = migor_nor_flash_partitions, - .nr_parts = ARRAY_SIZE(migor_nor_flash_partitions), -}; - -static struct resource migor_nor_flash_resources[] = { - [0] = { - .name = "NOR Flash", - .start = 0x00000000, - .end = 0x03ffffff, - .flags = IORESOURCE_MEM, - } -}; - -static struct platform_device migor_nor_flash_device = { - .name = "physmap-flash", - .resource = migor_nor_flash_resources, - .num_resources = ARRAY_SIZE(migor_nor_flash_resources), - .dev = { - .platform_data = &migor_nor_flash_data, - }, -}; - -static struct mtd_partition migor_nand_flash_partitions[] = { - { - .name = "nanddata1", - .offset = 0x0, - .size = 512 * 1024 * 1024, - }, - { - .name = "nanddata2", - .offset = MTDPART_OFS_APPEND, - .size = 512 * 1024 * 1024, - }, -}; - -static void migor_nand_flash_cmd_ctl(struct mtd_info *mtd, int cmd, - unsigned int ctrl) -{ - struct nand_chip *chip = mtd->priv; - - if (cmd == NAND_CMD_NONE) - return; - - if (ctrl & NAND_CLE) - writeb(cmd, chip->IO_ADDR_W + 0x00400000); - else if (ctrl & NAND_ALE) - writeb(cmd, chip->IO_ADDR_W + 0x00800000); - else - writeb(cmd, chip->IO_ADDR_W); -} - -static int migor_nand_flash_ready(struct mtd_info *mtd) -{ - return ctrl_inb(PORT_PADR) & 0x02; /* PTA1 */ -} - -struct platform_nand_data migor_nand_flash_data = { - .chip = { - .nr_chips = 1, - .partitions = migor_nand_flash_partitions, - .nr_partitions = ARRAY_SIZE(migor_nand_flash_partitions), - .chip_delay = 20, - .part_probe_types = (const char *[]) { "cmdlinepart", NULL }, - }, - .ctrl = { - .dev_ready = migor_nand_flash_ready, - .cmd_ctrl = migor_nand_flash_cmd_ctl, - }, -}; - -static struct resource migor_nand_flash_resources[] = { - [0] = { - .name = "NAND Flash", - .start = 0x18000000, - .end = 0x18ffffff, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device migor_nand_flash_device = { - .name = "gen_nand", - .resource = migor_nand_flash_resources, - .num_resources = ARRAY_SIZE(migor_nand_flash_resources), - .dev = { - .platform_data = &migor_nand_flash_data, - } -}; - -static struct platform_device *migor_devices[] __initdata = { - &smc91x_eth_device, - &sh_keysc_device, - &migor_nor_flash_device, - &migor_nand_flash_device, -}; - -static struct i2c_board_info __initdata migor_i2c_devices[] = { - { - I2C_BOARD_INFO("rs5c372b", 0x32), - }, - { - I2C_BOARD_INFO("migor_ts", 0x51), - .irq = 38, /* IRQ6 */ - }, -}; - -static int __init migor_devices_setup(void) -{ - i2c_register_board_info(0, migor_i2c_devices, - ARRAY_SIZE(migor_i2c_devices)); - - return platform_add_devices(migor_devices, ARRAY_SIZE(migor_devices)); -} -__initcall(migor_devices_setup); - -static void __init migor_setup(char **cmdline_p) -{ - /* SMC91C111 - Enable IRQ0 */ - ctrl_outw(ctrl_inw(PORT_PJCR) & ~0x0003, PORT_PJCR); - - /* KEYSC */ - ctrl_outw(ctrl_inw(PORT_PYCR) & ~0x0fff, PORT_PYCR); - ctrl_outw(ctrl_inw(PORT_PZCR) & ~0x0ff0, PORT_PZCR); - ctrl_outw(ctrl_inw(PORT_PSELA) & ~0x4100, PORT_PSELA); - ctrl_outw(ctrl_inw(PORT_HIZCRA) & ~0x4000, PORT_HIZCRA); - ctrl_outw(ctrl_inw(PORT_HIZCRC) & ~0xc000, PORT_HIZCRC); - ctrl_outl(ctrl_inl(MSTPCR2) & ~0x00004000, MSTPCR2); - - /* NAND Flash */ - ctrl_outw(ctrl_inw(PORT_PXCR) & 0x0fff, PORT_PXCR); - ctrl_outl((ctrl_inl(BSC_CS6ABCR) & ~0x00000600) | 0x00000200, - BSC_CS6ABCR); - - /* I2C */ - ctrl_outl(ctrl_inl(MSTPCR1) & ~0x00000200, MSTPCR1); - - /* Touch Panel - Enable IRQ6 */ - ctrl_outw(ctrl_inw(PORT_PZCR) & ~0xc, PORT_PZCR); - ctrl_outw((ctrl_inw(PORT_PSELA) | 0x8000), PORT_PSELA); - ctrl_outw((ctrl_inw(PORT_HIZCRC) & ~0x4000), PORT_HIZCRC); -} - -static struct sh_machine_vector mv_migor __initmv = { - .mv_name = "Migo-R", - .mv_setup = migor_setup, -}; diff --git a/arch/sh/boards/se/7343/irq.c b/arch/sh/boards/se/7343/irq.c deleted file mode 100644 index 763f6deba814..000000000000 --- a/arch/sh/boards/se/7343/irq.c +++ /dev/null @@ -1,202 +0,0 @@ -/* - * arch/sh/boards/se/7343/irq.c - * - */ -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <asm/irq.h> -#include <asm/io.h> -#include <asm/mach/se7343.h> - -static void -disable_intreq_irq(unsigned int irq) -{ - int bit = irq - OFFCHIP_IRQ_BASE; - u16 val; - - val = ctrl_inw(PA_CPLD_IMSK); - val |= 1 << bit; - ctrl_outw(val, PA_CPLD_IMSK); -} - -static void -enable_intreq_irq(unsigned int irq) -{ - int bit = irq - OFFCHIP_IRQ_BASE; - u16 val; - - val = ctrl_inw(PA_CPLD_IMSK); - val &= ~(1 << bit); - ctrl_outw(val, PA_CPLD_IMSK); -} - -static void -mask_and_ack_intreq_irq(unsigned int irq) -{ - disable_intreq_irq(irq); -} - -static unsigned int -startup_intreq_irq(unsigned int irq) -{ - enable_intreq_irq(irq); - return 0; -} - -static void -shutdown_intreq_irq(unsigned int irq) -{ - disable_intreq_irq(irq); -} - -static void -end_intreq_irq(unsigned int irq) -{ - if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) - enable_intreq_irq(irq); -} - -static struct hw_interrupt_type intreq_irq_type = { - .typename = "FPGA-IRQ", - .startup = startup_intreq_irq, - .shutdown = shutdown_intreq_irq, - .enable = enable_intreq_irq, - .disable = disable_intreq_irq, - .ack = mask_and_ack_intreq_irq, - .end = end_intreq_irq -}; - -static void -make_intreq_irq(unsigned int irq) -{ - disable_irq_nosync(irq); - irq_desc[irq].chip = &intreq_irq_type; - disable_intreq_irq(irq); -} - -int -shmse_irq_demux(int irq) -{ - int bit; - volatile u16 val; - - if (irq == IRQ5_IRQ) { - /* Read status Register */ - val = ctrl_inw(PA_CPLD_ST); - bit = ffs(val); - if (bit != 0) - return OFFCHIP_IRQ_BASE + bit - 1; - } - return irq; -} - -/* IRQ5 is multiplexed between the following sources: - * 1. PC Card socket - * 2. Extension slot - * 3. USB Controller - * 4. Serial Controller - * - * We configure IRQ5 as a cascade IRQ. - */ -static struct irqaction irq5 = { - .handler = no_action, - .mask = CPU_MASK_NONE, - .name = "IRQ5-cascade", -}; - -static struct ipr_data se7343_irq5_ipr_map[] = { - { IRQ5_IRQ, IRQ5_IPR_ADDR+2, IRQ5_IPR_POS, IRQ5_PRIORITY }, -}; -static struct ipr_data se7343_siof0_vpu_ipr_map[] = { - { SIOF0_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS, SIOF0_PRIORITY }, - { VPU_IRQ, VPU_IPR_ADDR, VPU_IPR_POS, 8 }, -}; -static struct ipr_data se7343_other_ipr_map[] = { - { DMTE0_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY }, - { DMTE1_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY }, - { DMTE2_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY }, - { DMTE3_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY }, - { DMTE4_IRQ, DMA2_IPR_ADDR, DMA2_IPR_POS, DMA2_PRIORITY }, - { DMTE5_IRQ, DMA2_IPR_ADDR, DMA2_IPR_POS, DMA2_PRIORITY }, - - /* I2C block */ - { IIC0_ALI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, IIC0_PRIORITY }, - { IIC0_TACKI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, IIC0_PRIORITY }, - { IIC0_WAITI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, IIC0_PRIORITY }, - { IIC0_DTEI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, IIC0_PRIORITY }, - - { IIC1_ALI_IRQ, IIC1_IPR_ADDR, IIC1_IPR_POS, IIC1_PRIORITY }, - { IIC1_TACKI_IRQ, IIC1_IPR_ADDR, IIC1_IPR_POS, IIC1_PRIORITY }, - { IIC1_WAITI_IRQ, IIC1_IPR_ADDR, IIC1_IPR_POS, IIC1_PRIORITY }, - { IIC1_DTEI_IRQ, IIC1_IPR_ADDR, IIC1_IPR_POS, IIC1_PRIORITY }, - - /* SIOF */ - { SIOF0_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS, SIOF0_PRIORITY }, - - /* SIU */ - { SIU_IRQ, SIU_IPR_ADDR, SIU_IPR_POS, SIU_PRIORITY }, - - /* VIO interrupt */ - { CEU_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY }, - { BEU_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY }, - { VEU_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY }, - - /*MFI interrupt*/ - - { MFI_IRQ, MFI_IPR_ADDR, MFI_IPR_POS, MFI_PRIORITY }, - - /* LCD controller */ - { LCDC_IRQ, LCDC_IPR_ADDR, LCDC_IPR_POS, LCDC_PRIORITY }, -}; - -/* - * Initialize IRQ setting - */ -void __init -init_7343se_IRQ(void) -{ - /* Setup Multiplexed interrupts */ - ctrl_outw(8, PA_CPLD_MODESET); /* Set all CPLD interrupts to active - * low. - */ - /* Mask all CPLD controller interrupts */ - ctrl_outw(0x0fff, PA_CPLD_IMSK); - - /* PC Card interrupts */ - make_intreq_irq(PC_IRQ0); - make_intreq_irq(PC_IRQ1); - make_intreq_irq(PC_IRQ2); - make_intreq_irq(PC_IRQ3); - - /* Extension Slot Interrupts */ - make_intreq_irq(EXT_IRQ0); - make_intreq_irq(EXT_IRQ1); - make_intreq_irq(EXT_IRQ2); - make_intreq_irq(EXT_IRQ3); - - /* USB Controller interrupts */ - make_intreq_irq(USB_IRQ0); - make_intreq_irq(USB_IRQ1); - - /* Serial Controller interrupts */ - make_intreq_irq(UART_IRQ0); - make_intreq_irq(UART_IRQ1); - - /* Setup all external interrupts to be active low */ - ctrl_outw(0xaaaa, INTC_ICR1); - - make_ipr_irq(se7343_irq5_ipr_map, ARRAY_SIZE(se7343_irq5_ipr_map)); - - setup_irq(IRQ5_IRQ, &irq5); - /* Set port control to use IRQ5 */ - *(u16 *)0xA4050108 &= ~0xc; - - make_ipr_irq(se7343_siof0_vpu_ipr_map, ARRAY_SIZE(se7343_siof0_vpu_ipr_map)); - - ctrl_outb(0x0f, INTC_IMCR5); /* enable SCIF IRQ */ - - make_ipr_irq(se7343_other_ipr_map, ARRAY_SIZE(se7343_other_ipr_map)); - - ctrl_outw(0x2000, PA_MRSHPC + 0x0c); /* mrshpc irq enable */ -} diff --git a/arch/sh/boards/se/7619/Makefile b/arch/sh/boards/se/7619/Makefile deleted file mode 100644 index d21775c28cda..000000000000 --- a/arch/sh/boards/se/7619/Makefile +++ /dev/null @@ -1,5 +0,0 @@ -# -# Makefile for the 7619 SolutionEngine specific parts of the kernel -# - -obj-y := setup.o diff --git a/arch/sh/boards/shmin/Makefile b/arch/sh/boards/shmin/Makefile deleted file mode 100644 index 3190cc72430e..000000000000 --- a/arch/sh/boards/shmin/Makefile +++ /dev/null @@ -1,5 +0,0 @@ -# -# Makefile for the SHMIN board. -# - -obj-y := setup.o diff --git a/arch/sh/boot/Makefile b/arch/sh/boot/Makefile index 89b408620dcb..5b54965eef98 100644 --- a/arch/sh/boot/Makefile +++ b/arch/sh/boot/Makefile @@ -18,9 +18,10 @@ CONFIG_PAGE_OFFSET ?= 0x80000000 CONFIG_MEMORY_START ?= 0x0c000000 CONFIG_BOOT_LINK_OFFSET ?= 0x00800000 CONFIG_ZERO_PAGE_OFFSET ?= 0x00001000 +CONFIG_ENTRY_OFFSET ?= 0x00001000 export CONFIG_PAGE_OFFSET CONFIG_MEMORY_START CONFIG_BOOT_LINK_OFFSET \ - CONFIG_ZERO_PAGE_OFFSET + CONFIG_ZERO_PAGE_OFFSET CONFIG_ENTRY_OFFSET targets := zImage vmlinux.srec uImage uImage.srec subdir- := compressed @@ -40,7 +41,7 @@ KERNEL_LOAD := $(shell /bin/bash -c 'printf "0x%08x" \ KERNEL_ENTRY := $(shell /bin/bash -c 'printf "0x%08x" \ $$[$(CONFIG_PAGE_OFFSET) + \ $(CONFIG_MEMORY_START) + \ - $(CONFIG_ZERO_PAGE_OFFSET)+0x1000]') + $(CONFIG_ZERO_PAGE_OFFSET) + $(CONFIG_ENTRY_OFFSET)]') quiet_cmd_uimage = UIMAGE $@ cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A sh -O linux -T kernel \ diff --git a/arch/sh/boot/compressed/Makefile_32 b/arch/sh/boot/compressed/Makefile_32 index c0d25fb1aa60..47685f618ae7 100644 --- a/arch/sh/boot/compressed/Makefile_32 +++ b/arch/sh/boot/compressed/Makefile_32 @@ -35,8 +35,7 @@ $(obj)/vmlinux.bin: vmlinux FORCE $(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE $(call if_changed,gzip) -LDFLAGS_piggy.o := -r --format binary --oformat elf32-sh-linux -T OBJCOPYFLAGS += -R .empty_zero_page -$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.gz FORCE - $(call if_changed,ld) +$(obj)/piggy.o: $(obj)/piggy.S $(obj)/vmlinux.bin.gz FORCE + $(call if_changed,as_o_S) diff --git a/arch/sh/boot/compressed/Makefile_64 b/arch/sh/boot/compressed/Makefile_64 index 912f3e205a0d..658d4f915556 100644 --- a/arch/sh/boot/compressed/Makefile_64 +++ b/arch/sh/boot/compressed/Makefile_64 @@ -37,8 +37,7 @@ $(obj)/vmlinux.bin: vmlinux FORCE $(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE $(call if_changed,gzip) -LDFLAGS_piggy.o := -r --format binary --oformat elf32-sh64-linux -T OBJCOPYFLAGS += -R .empty_zero_page -$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.gz FORCE - $(call if_changed,ld) +$(obj)/piggy.o: $(obj)/piggy.S $(obj)/vmlinux.bin.gz FORCE + $(call if_changed,as_o_S) diff --git a/arch/sh/boot/compressed/head_64.S b/arch/sh/boot/compressed/head_64.S index f72c1989f5f2..622eac3cf556 100644 --- a/arch/sh/boot/compressed/head_64.S +++ b/arch/sh/boot/compressed/head_64.S @@ -14,8 +14,8 @@ * Copyright (C) 2002 Stuart Menefy (stuart.menefy@st.com) */ #include <asm/cache.h> -#include <asm/cpu/mmu_context.h> -#include <asm/cpu/registers.h> +#include <cpu/mmu_context.h> +#include <cpu/registers.h> /* * Fixed TLB entries to identity map the beginning of RAM diff --git a/arch/sh/boot/compressed/misc_32.c b/arch/sh/boot/compressed/misc_32.c index adcea31e663e..f386997e4d9c 100644 --- a/arch/sh/boot/compressed/misc_32.c +++ b/arch/sh/boot/compressed/misc_32.c @@ -74,8 +74,6 @@ static unsigned outcnt = 0; /* bytes in output buffer */ static int fill_inbuf(void); static void flush_window(void); static void error(char *m); -static void gzip_mark(void **); -static void gzip_release(void **); extern char input_data[]; extern int input_len; @@ -84,11 +82,7 @@ static long bytes_out = 0; static uch *output_data; static unsigned long output_ptr = 0; -static void *malloc(int size); -static void free(void *where); static void error(char *m); -static void gzip_mark(void **); -static void gzip_release(void **); int puts(const char *); @@ -101,38 +95,6 @@ static unsigned long free_mem_end_ptr; #include "../../../../lib/inflate.c" -static void *malloc(int size) -{ - void *p; - - if (size <0) error("Malloc error"); - if (free_mem_ptr == 0) error("Memory error"); - - free_mem_ptr = (free_mem_ptr + 3) & ~3; /* Align */ - - p = (void *)free_mem_ptr; - free_mem_ptr += size; - - if (free_mem_ptr >= free_mem_end_ptr) - error("Out of memory"); - - return p; -} - -static void free(void *where) -{ /* Don't care */ -} - -static void gzip_mark(void **ptr) -{ - *ptr = (void *) free_mem_ptr; -} - -static void gzip_release(void **ptr) -{ - free_mem_ptr = (long) *ptr; -} - #ifdef CONFIG_SH_STANDARD_BIOS size_t strlen(const char *s) { diff --git a/arch/sh/boot/compressed/misc_64.c b/arch/sh/boot/compressed/misc_64.c index a006ef89b9dd..2941657e18aa 100644 --- a/arch/sh/boot/compressed/misc_64.c +++ b/arch/sh/boot/compressed/misc_64.c @@ -72,8 +72,6 @@ static unsigned outcnt = 0; /* bytes in output buffer */ static int fill_inbuf(void); static void flush_window(void); static void error(char *m); -static void gzip_mark(void **); -static void gzip_release(void **); extern char input_data[]; extern int input_len; @@ -82,11 +80,7 @@ static long bytes_out = 0; static uch *output_data; static unsigned long output_ptr = 0; -static void *malloc(int size); -static void free(void *where); static void error(char *m); -static void gzip_mark(void **); -static void gzip_release(void **); static void puts(const char *); @@ -99,40 +93,6 @@ static unsigned long free_mem_end_ptr; #include "../../../../lib/inflate.c" -static void *malloc(int size) -{ - void *p; - - if (size < 0) - error("Malloc error\n"); - if (free_mem_ptr == 0) - error("Memory error\n"); - - free_mem_ptr = (free_mem_ptr + 3) & ~3; /* Align */ - - p = (void *) free_mem_ptr; - free_mem_ptr += size; - - if (free_mem_ptr >= free_mem_end_ptr) - error("\nOut of memory\n"); - - return p; -} - -static void free(void *where) -{ /* Don't care */ -} - -static void gzip_mark(void **ptr) -{ - *ptr = (void *) free_mem_ptr; -} - -static void gzip_release(void **ptr) -{ - free_mem_ptr = (long) *ptr; -} - void puts(const char *s) { } diff --git a/arch/sh/boot/compressed/piggy.S b/arch/sh/boot/compressed/piggy.S new file mode 100644 index 000000000000..566071926b13 --- /dev/null +++ b/arch/sh/boot/compressed/piggy.S @@ -0,0 +1,8 @@ + .global input_len, input_data + .data +input_len: + .long input_data_end - input_data +input_data: + .incbin "arch/sh/boot/compressed/vmlinux.bin.gz" +input_data_end: + .end diff --git a/arch/sh/boot/compressed/vmlinux.scr b/arch/sh/boot/compressed/vmlinux.scr deleted file mode 100644 index 1ed9d791f863..000000000000 --- a/arch/sh/boot/compressed/vmlinux.scr +++ /dev/null @@ -1,9 +0,0 @@ -SECTIONS -{ - .data : { - input_len = .; - LONG(input_data_end - input_data) input_data = .; - *(.data) - input_data_end = .; - } -} diff --git a/arch/sh/configs/ap325rxa_defconfig b/arch/sh/configs/ap325rxa_defconfig new file mode 100644 index 000000000000..29926a9b9ce2 --- /dev/null +++ b/arch/sh/configs/ap325rxa_defconfig @@ -0,0 +1,964 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.26 +# Wed Jul 30 01:18:59 2008 +# +CONFIG_SUPERH=y +CONFIG_SUPERH32=y +CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_BUG=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_NO_VIRT_TO_BUS=y +CONFIG_ARCH_SUPPORTS_AOUT=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_KALLSYMS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set +# CONFIG_HAVE_IOREMAP_PROT is not set +# CONFIG_HAVE_KPROBES is not set +# CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_ARCH_TRACEHOOK is not set +# CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +CONFIG_HAVE_CLK=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +CONFIG_CLASSIC_RCU=y + +# +# System type +# +CONFIG_CPU_SH4=y +CONFIG_CPU_SH4A=y +CONFIG_CPU_SHX2=y +# CONFIG_CPU_SUBTYPE_SH7619 is not set +# CONFIG_CPU_SUBTYPE_SH7203 is not set +# CONFIG_CPU_SUBTYPE_SH7206 is not set +# CONFIG_CPU_SUBTYPE_SH7263 is not set +# CONFIG_CPU_SUBTYPE_MXG is not set +# CONFIG_CPU_SUBTYPE_SH7705 is not set +# CONFIG_CPU_SUBTYPE_SH7706 is not set +# CONFIG_CPU_SUBTYPE_SH7707 is not set +# CONFIG_CPU_SUBTYPE_SH7708 is not set +# CONFIG_CPU_SUBTYPE_SH7709 is not set +# CONFIG_CPU_SUBTYPE_SH7710 is not set +# CONFIG_CPU_SUBTYPE_SH7712 is not set +# CONFIG_CPU_SUBTYPE_SH7720 is not set +# CONFIG_CPU_SUBTYPE_SH7721 is not set +# CONFIG_CPU_SUBTYPE_SH7750 is not set +# CONFIG_CPU_SUBTYPE_SH7091 is not set +# CONFIG_CPU_SUBTYPE_SH7750R is not set +# CONFIG_CPU_SUBTYPE_SH7750S is not set +# CONFIG_CPU_SUBTYPE_SH7751 is not set +# CONFIG_CPU_SUBTYPE_SH7751R is not set +# CONFIG_CPU_SUBTYPE_SH7760 is not set +# CONFIG_CPU_SUBTYPE_SH4_202 is not set +CONFIG_CPU_SUBTYPE_SH7723=y +# CONFIG_CPU_SUBTYPE_SH7763 is not set +# CONFIG_CPU_SUBTYPE_SH7770 is not set +# CONFIG_CPU_SUBTYPE_SH7780 is not set +# CONFIG_CPU_SUBTYPE_SH7785 is not set +# CONFIG_CPU_SUBTYPE_SHX3 is not set +# CONFIG_CPU_SUBTYPE_SH7343 is not set +# CONFIG_CPU_SUBTYPE_SH7722 is not set +# CONFIG_CPU_SUBTYPE_SH7366 is not set +# CONFIG_CPU_SUBTYPE_SH5_101 is not set +# CONFIG_CPU_SUBTYPE_SH5_103 is not set + +# +# Memory management options +# +CONFIG_QUICKLIST=y +CONFIG_MMU=y +CONFIG_PAGE_OFFSET=0x80000000 +CONFIG_MEMORY_START=0x08000000 +CONFIG_MEMORY_SIZE=0x08000000 +CONFIG_29BIT=y +# CONFIG_X2TLB is not set +CONFIG_VSYSCALL=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_DEFAULT=y +CONFIG_MAX_ACTIVE_REGIONS=1 +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_PAGE_SIZE_4KB=y +# CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_16KB is not set +# CONFIG_PAGE_SIZE_64KB is not set +CONFIG_ENTRY_OFFSET=0x00001000 +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_SPARSEMEM_STATIC=y +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_NR_QUICK=2 + +# +# Cache configuration +# +# CONFIG_SH_DIRECT_MAPPED is not set +CONFIG_CACHE_WRITEBACK=y +# CONFIG_CACHE_WRITETHROUGH is not set +# CONFIG_CACHE_OFF is not set + +# +# Processor features +# +CONFIG_CPU_LITTLE_ENDIAN=y +# CONFIG_CPU_BIG_ENDIAN is not set +CONFIG_SH_FPU=y +# CONFIG_SH_STORE_QUEUES is not set +CONFIG_CPU_HAS_INTEVT=y +CONFIG_CPU_HAS_SR_RB=y +CONFIG_CPU_HAS_PTEA=y +CONFIG_CPU_HAS_FPU=y + +# +# Board support +# +CONFIG_SH_AP325RXA=y + +# +# Timer and clock configuration +# +CONFIG_SH_TMU=y +CONFIG_SH_TIMER_IRQ=16 +CONFIG_SH_PCLK_FREQ=33333333 +CONFIG_TICK_ONESHOT=y +# CONFIG_NO_HZ is not set +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# DMA support +# +# CONFIG_SH_DMA is not set + +# +# Companion Chips +# + +# +# Additional SuperH Device Drivers +# +# CONFIG_HEARTBEAT is not set +# CONFIG_PUSH_SWITCH is not set + +# +# Kernel features +# +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set +# CONFIG_KEXEC is not set +# CONFIG_CRASH_DUMP is not set +# CONFIG_PREEMPT_NONE is not set +# CONFIG_PREEMPT_VOLUNTARY is not set +CONFIG_PREEMPT=y +# CONFIG_PREEMPT_RCU is not set +CONFIG_GUSA=y + +# +# Boot options +# +CONFIG_ZERO_PAGE_OFFSET=0x00001000 +CONFIG_BOOT_LINK_OFFSET=0x00800000 +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE="console=tty1 console=ttySC5,38400 root=/dev/nfs ip=dhcp" + +# +# Bus options +# +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Executable file formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_ASK_IP_FIB_HASH=y +# CONFIG_IP_FIB_TRIE is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_MULTIPLE_TABLES is not set +# CONFIG_IP_ROUTE_MULTIPATH is not set +# CONFIG_IP_ROUTE_VERBOSE is not set +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0xffffffff +CONFIG_MTD_PHYSMAP_LEN=0 +CONFIG_MTD_PHYSMAP_BANKWIDTH=0 +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=4 +CONFIG_BLK_DEV_RAM_SIZE=4096 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_DH is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +# CONFIG_STNIC is not set +# CONFIG_SMC91X is not set +CONFIG_SMC911X=y +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_SH_SCI=y +CONFIG_SERIAL_SH_SCI_NR_UARTS=6 +CONFIG_SERIAL_SH_SCI_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set +# CONFIG_SPI is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +CONFIG_DUMMY_CONSOLE=y +# CONFIG_SOUND is not set +# CONFIG_HID_SUPPORT is not set +# CONFIG_USB_SUPPORT is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_UIO is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT2_FS_POSIX_ACL=y +CONFIG_EXT2_FS_SECURITY=y +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +CONFIG_EXT3_FS_POSIX_ACL=y +CONFIG_EXT3_FS_SECURITY=y +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +# CONFIG_MSDOS_FS is not set +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLBFS is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +CONFIG_ROOT_NFS=y +CONFIG_NFSD=y +CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set +# CONFIG_NFSD_V4 is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +CONFIG_NLS_CODEPAGE_932=y +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set +# CONFIG_DLM is not set + +# +# Kernel hacking +# +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +# CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_SAMPLES is not set +# CONFIG_SH_STANDARD_BIOS is not set +# CONFIG_EARLY_SCIF_CONSOLE is not set +# CONFIG_SH_KGDB is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_HW=y + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +CONFIG_CRC_T10DIF=y +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/sh/configs/dreamcast_defconfig b/arch/sh/configs/dreamcast_defconfig index 57728788b753..3dc1cbd8a981 100644 --- a/arch/sh/configs/dreamcast_defconfig +++ b/arch/sh/configs/dreamcast_defconfig @@ -1,14 +1,17 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.23-rc7 -# Fri Sep 21 15:46:27 2007 +# Linux kernel version: 2.6.27-rc1 +# Mon Aug 4 16:49:13 2008 # CONFIG_SUPERH=y +CONFIG_SUPERH32=y +CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_TIME=y @@ -37,12 +40,15 @@ CONFIG_SYSVIPC_SYSCTL=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +# CONFIG_GROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set # CONFIG_BLK_DEV_INITRD is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y @@ -55,21 +61,39 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +CONFIG_PROFILING=y +# CONFIG_MARKERS is not set +# CONFIG_OPROFILE is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set +# CONFIG_HAVE_IOREMAP_PROT is not set +# CONFIG_HAVE_KPROBES is not set +# CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_ARCH_TRACEHOOK is not set +# CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +CONFIG_HAVE_CLK=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set @@ -80,6 +104,7 @@ CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -93,13 +118,17 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y # # System type # CONFIG_CPU_SH4=y # CONFIG_CPU_SUBTYPE_SH7619 is not set +# CONFIG_CPU_SUBTYPE_SH7203 is not set # CONFIG_CPU_SUBTYPE_SH7206 is not set +# CONFIG_CPU_SUBTYPE_SH7263 is not set +# CONFIG_CPU_SUBTYPE_MXG is not set # CONFIG_CPU_SUBTYPE_SH7705 is not set # CONFIG_CPU_SUBTYPE_SH7706 is not set # CONFIG_CPU_SUBTYPE_SH7707 is not set @@ -108,6 +137,7 @@ CONFIG_CPU_SH4=y # CONFIG_CPU_SUBTYPE_SH7710 is not set # CONFIG_CPU_SUBTYPE_SH7712 is not set # CONFIG_CPU_SUBTYPE_SH7720 is not set +# CONFIG_CPU_SUBTYPE_SH7721 is not set # CONFIG_CPU_SUBTYPE_SH7750 is not set CONFIG_CPU_SUBTYPE_SH7091=y # CONFIG_CPU_SUBTYPE_SH7750R is not set @@ -116,14 +146,17 @@ CONFIG_CPU_SUBTYPE_SH7091=y # CONFIG_CPU_SUBTYPE_SH7751R is not set # CONFIG_CPU_SUBTYPE_SH7760 is not set # CONFIG_CPU_SUBTYPE_SH4_202 is not set -# CONFIG_CPU_SUBTYPE_ST40STB1 is not set -# CONFIG_CPU_SUBTYPE_ST40GX1 is not set +# CONFIG_CPU_SUBTYPE_SH7723 is not set +# CONFIG_CPU_SUBTYPE_SH7763 is not set # CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set # CONFIG_CPU_SUBTYPE_SH7785 is not set # CONFIG_CPU_SUBTYPE_SHX3 is not set # CONFIG_CPU_SUBTYPE_SH7343 is not set # CONFIG_CPU_SUBTYPE_SH7722 is not set +# CONFIG_CPU_SUBTYPE_SH7366 is not set +# CONFIG_CPU_SUBTYPE_SH5_101 is not set +# CONFIG_CPU_SUBTYPE_SH5_103 is not set # # Memory management options @@ -133,6 +166,7 @@ CONFIG_MMU=y CONFIG_PAGE_OFFSET=0x80000000 CONFIG_MEMORY_START=0x0c000000 CONFIG_MEMORY_SIZE=0x01000000 +CONFIG_29BIT=y CONFIG_VSYSCALL=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_SPARSEMEM_ENABLE=y @@ -142,12 +176,15 @@ CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set +CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_HUGETLB_PAGE_SIZE_64K=y # CONFIG_HUGETLB_PAGE_SIZE_256K is not set # CONFIG_HUGETLB_PAGE_SIZE_1MB is not set # CONFIG_HUGETLB_PAGE_SIZE_4MB is not set # CONFIG_HUGETLB_PAGE_SIZE_64MB is not set +# CONFIG_HUGETLB_PAGE_SIZE_512MB is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -155,6 +192,8 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPARSEMEM_STATIC=y +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 @@ -194,6 +233,7 @@ CONFIG_SH_PCLK_FREQ=49876504 # CONFIG_TICK_ONESHOT is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # # CPU Frequency scaling @@ -204,7 +244,10 @@ CONFIG_CPU_FREQ_TABLE=y CONFIG_CPU_FREQ_STAT=y # CONFIG_CPU_FREQ_STAT_DETAILS is not set CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set CONFIG_CPU_FREQ_GOV_PERFORMANCE=y CONFIG_CPU_FREQ_GOV_POWERSAVE=y CONFIG_CPU_FREQ_GOV_USERSPACE=y @@ -239,12 +282,16 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +CONFIG_SECCOMP=y # CONFIG_PREEMPT_NONE is not set # CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y -CONFIG_PREEMPT_BKL=y +# CONFIG_PREEMPT_RCU is not set +CONFIG_GUSA=y +# CONFIG_GUSA_RB is not set # # Boot options @@ -263,10 +310,7 @@ CONFIG_PCI=y CONFIG_SH_PCIDMA_NONCOHERENT=y CONFIG_PCI_AUTO=y # CONFIG_ARCH_SUPPORTS_MSI is not set - -# -# PCCARD (PCMCIA/CardBus) support -# +CONFIG_PCI_LEGACY=y # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set @@ -275,10 +319,6 @@ CONFIG_PCI_AUTO=y # CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set - -# -# Networking -# CONFIG_NET=y # @@ -291,6 +331,7 @@ CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -309,6 +350,7 @@ CONFIG_IP_FIB_HASH=y CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -316,8 +358,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -334,10 +374,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set # @@ -345,6 +381,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set @@ -366,6 +403,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_STANDALONE is not set CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -374,6 +412,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_MTD is not set # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y +CONFIG_GDROM=y # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_UMEM is not set @@ -384,11 +423,15 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_RAM is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -400,44 +443,49 @@ CONFIG_MISC_DEVICES=y # CONFIG_SCSI_NETLINK is not set # CONFIG_ATA is not set # CONFIG_MD is not set +# CONFIG_FUSION is not set # -# Fusion MPT device support +# IEEE 1394 (FireWire) support # -# CONFIG_FUSION is not set # -# IEEE 1394 (FireWire) support +# Enable only one of the two stacks, unless you know what you are doing # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set +# CONFIG_VETH is not set # CONFIG_ARCNET is not set # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y +# CONFIG_AX88796 is not set # CONFIG_STNIC is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_SMC91X is not set +# CONFIG_SMC911X is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set -# CONFIG_DGRS is not set # CONFIG_EEPRO100 is not set # CONFIG_E100 is not set # CONFIG_FEALNX is not set @@ -449,6 +497,7 @@ CONFIG_8139TOO=y # CONFIG_8139TOO_TUNE_TWISTER is not set # CONFIG_8139TOO_8129 is not set # CONFIG_8139_OLD_RX_RESET is not set +# CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set @@ -464,12 +513,12 @@ CONFIG_8139TOO=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -491,7 +540,6 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set @@ -505,6 +553,8 @@ CONFIG_INPUT_KEYBOARD=y # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set # CONFIG_KEYBOARD_STOWAWAY is not set +CONFIG_KEYBOARD_MAPLE=y +# CONFIG_KEYBOARD_SH_KEYSC is not set CONFIG_INPUT_MOUSE=y # CONFIG_MOUSE_PS2 is not set # CONFIG_MOUSE_SERIAL is not set @@ -530,10 +580,13 @@ CONFIG_SERIO_LIBPS2=y # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set # # Serial drivers @@ -553,6 +606,19 @@ CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_DEVPORT=y +# CONFIG_I2C is not set +# CONFIG_SPI is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -568,45 +634,40 @@ CONFIG_SH_WDT=y # # CONFIG_PCIPCWATCHDOG is not set # CONFIG_WDTPCI is not set -CONFIG_HW_RANDOM=y -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set -# CONFIG_DRM is not set -# CONFIG_RAW_DRIVER is not set -# CONFIG_TCG_TPM is not set -CONFIG_DEVPORT=y -# CONFIG_I2C is not set # -# SPI support +# Sonics Silicon Backplane # -# CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set -# CONFIG_W1 is not set -# CONFIG_POWER_SUPPLY is not set -# CONFIG_HWMON is not set +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set -# CONFIG_DAB is not set +# CONFIG_VIDEO_MEDIA is not set # -# Graphics support +# Multimedia drivers # -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +# CONFIG_DAB is not set # -# Display device support +# Graphics support # -# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m CONFIG_FB=y @@ -615,11 +676,12 @@ CONFIG_FIRMWARE_EDID=y CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set # CONFIG_FB_SYS_FILLRECT is not set # CONFIG_FB_SYS_COPYAREA is not set # CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set # CONFIG_FB_SYS_FOPS is not set -CONFIG_FB_DEFERRED_IO=y # CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set @@ -653,7 +715,15 @@ CONFIG_FB_PVR2=y # CONFIG_FB_TRIDENT is not set # CONFIG_FB_ARK is not set # CONFIG_FB_PM3 is not set +# CONFIG_FB_CARMINE is not set +# CONFIG_FB_SH_MOBILE_LCDC is not set # CONFIG_FB_VIRTUAL is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set # # Console display driver support @@ -680,49 +750,30 @@ CONFIG_LOGO=y # CONFIG_LOGO_SUPERH_MONO is not set # CONFIG_LOGO_SUPERH_VGA16 is not set CONFIG_LOGO_SUPERH_CLUT224=y - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # - -# -# USB Gadget Support -# # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_RTC_CLASS is not set - -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# - -# -# Userspace I/O -# +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # @@ -735,14 +786,11 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +# CONFIG_DNOTIFY is not set CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -# CONFIG_DNOTIFY is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -771,7 +819,6 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set # @@ -786,14 +833,14 @@ CONFIG_RAMFS=y # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y # CONFIG_NFS_FS is not set # CONFIG_NFSD is not set # CONFIG_SMB_FS is not set @@ -807,35 +854,25 @@ CONFIG_RAMFS=y # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# # CONFIG_NLS is not set - -# -# Distributed Lock Manager -# # CONFIG_DLM is not set # -# Profiling support -# -CONFIG_PROFILING=y -# CONFIG_OPROFILE is not set - -# # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_SAMPLES is not set # CONFIG_SH_STANDARD_BIOS is not set # CONFIG_EARLY_SCIF_CONSOLE is not set # CONFIG_SH_KGDB is not set @@ -845,14 +882,95 @@ CONFIG_ENABLE_MUST_CHECK=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set -# CONFIG_CRYPTO is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_HIFN_795X is not set # # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set diff --git a/arch/sh/configs/hp6xx_defconfig b/arch/sh/configs/hp6xx_defconfig index 756d38dc2f71..41e25b3a5b01 100644 --- a/arch/sh/configs/hp6xx_defconfig +++ b/arch/sh/configs/hp6xx_defconfig @@ -1,9 +1,11 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.23-rc4 -# Tue Sep 11 19:42:44 2007 +# Linux kernel version: 2.6.26 +# Wed Jul 30 01:24:57 2008 # CONFIG_SUPERH=y +CONFIG_SUPERH32=y +CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_FIND_NEXT_BIT=y @@ -20,6 +22,7 @@ CONFIG_LOCKDEP_SUPPORT=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_ARCH_NO_VIRT_TO_BUS=y +CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -34,12 +37,15 @@ CONFIG_SWAP=y # CONFIG_SYSVIPC is not set CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set -# CONFIG_USER_NS is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +# CONFIG_GROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set # CONFIG_BLK_DEV_INITRD is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y @@ -52,6 +58,7 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y @@ -64,6 +71,19 @@ CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set +# CONFIG_HAVE_IOREMAP_PROT is not set +# CONFIG_HAVE_KPROBES is not set +# CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_ARCH_TRACEHOOK is not set +# CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +CONFIG_HAVE_CLK=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -73,6 +93,7 @@ CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -86,13 +107,17 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y # # System type # CONFIG_CPU_SH3=y # CONFIG_CPU_SUBTYPE_SH7619 is not set +# CONFIG_CPU_SUBTYPE_SH7203 is not set # CONFIG_CPU_SUBTYPE_SH7206 is not set +# CONFIG_CPU_SUBTYPE_SH7263 is not set +# CONFIG_CPU_SUBTYPE_MXG is not set # CONFIG_CPU_SUBTYPE_SH7705 is not set # CONFIG_CPU_SUBTYPE_SH7706 is not set # CONFIG_CPU_SUBTYPE_SH7707 is not set @@ -101,6 +126,7 @@ CONFIG_CPU_SUBTYPE_SH7709=y # CONFIG_CPU_SUBTYPE_SH7710 is not set # CONFIG_CPU_SUBTYPE_SH7712 is not set # CONFIG_CPU_SUBTYPE_SH7720 is not set +# CONFIG_CPU_SUBTYPE_SH7721 is not set # CONFIG_CPU_SUBTYPE_SH7750 is not set # CONFIG_CPU_SUBTYPE_SH7091 is not set # CONFIG_CPU_SUBTYPE_SH7750R is not set @@ -109,14 +135,17 @@ CONFIG_CPU_SUBTYPE_SH7709=y # CONFIG_CPU_SUBTYPE_SH7751R is not set # CONFIG_CPU_SUBTYPE_SH7760 is not set # CONFIG_CPU_SUBTYPE_SH4_202 is not set -# CONFIG_CPU_SUBTYPE_ST40STB1 is not set -# CONFIG_CPU_SUBTYPE_ST40GX1 is not set +# CONFIG_CPU_SUBTYPE_SH7723 is not set +# CONFIG_CPU_SUBTYPE_SH7763 is not set # CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set # CONFIG_CPU_SUBTYPE_SH7785 is not set # CONFIG_CPU_SUBTYPE_SHX3 is not set # CONFIG_CPU_SUBTYPE_SH7343 is not set # CONFIG_CPU_SUBTYPE_SH7722 is not set +# CONFIG_CPU_SUBTYPE_SH7366 is not set +# CONFIG_CPU_SUBTYPE_SH5_101 is not set +# CONFIG_CPU_SUBTYPE_SH5_103 is not set # # Memory management options @@ -126,6 +155,7 @@ CONFIG_MMU=y CONFIG_PAGE_OFFSET=0x80000000 CONFIG_MEMORY_START=0x0d000000 CONFIG_MEMORY_SIZE=0x00400000 +CONFIG_29BIT=y CONFIG_VSYSCALL=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_SPARSEMEM_ENABLE=y @@ -135,7 +165,9 @@ CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set +CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -143,6 +175,8 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPARSEMEM_STATIC=y +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 @@ -181,6 +215,7 @@ CONFIG_SH_PCLK_FREQ=22110000 # CONFIG_TICK_ONESHOT is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # # CPU Frequency scaling @@ -219,11 +254,14 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set +CONFIG_GUSA=y +# CONFIG_GUSA_RB is not set # # Boot options @@ -237,10 +275,6 @@ CONFIG_BOOT_LINK_OFFSET=0x00800000 # CONFIG_ISA=y # CONFIG_ARCH_SUPPORTS_MSI is not set - -# -# PCCARD (PCMCIA/CardBus) support -# CONFIG_PCCARD=y # CONFIG_PCMCIA_DEBUG is not set CONFIG_PCMCIA=y @@ -263,11 +297,12 @@ CONFIG_BINFMT_ELF=y # # Power management options (EXPERIMENTAL) # +CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_PM=y -CONFIG_PM_LEGACY=y # CONFIG_PM_DEBUG is not set CONFIG_PM_SLEEP=y CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y CONFIG_APM_EMULATION=y # @@ -282,9 +317,12 @@ CONFIG_APM_EMULATION=y # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_STANDALONE is not set CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_SYS_HYPERVISOR is not set # CONFIG_MTD is not set # CONFIG_PARPORT is not set @@ -294,8 +332,11 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_RAM is not set # CONFIG_CDROM_PKTCDVD is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -332,6 +373,7 @@ CONFIG_BLK_DEV_SD=y # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_AHA152X is not set # CONFIG_SCSI_AIC7XXX_OLD is not set @@ -342,14 +384,17 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set # CONFIG_SCSI_NCR53C406A is not set # CONFIG_SCSI_PAS16 is not set -# CONFIG_SCSI_PSI240I is not set # CONFIG_SCSI_QLOGIC_FAS is not set # CONFIG_SCSI_SYM53C416 is not set # CONFIG_SCSI_T128 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set +# CONFIG_SCSI_DH is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_SATA_PMP=y +CONFIG_ATA_SFF=y +# CONFIG_SATA_MV is not set # CONFIG_PATA_LEGACY is not set # CONFIG_PATA_PCMCIA is not set # CONFIG_PATA_QDI is not set @@ -370,11 +415,9 @@ CONFIG_INPUT_POLLDEV=y # # CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_JOYDEV is not set -CONFIG_INPUT_TSDEV=y -CONFIG_INPUT_TSDEV_SCREEN_X=240 -CONFIG_INPUT_TSDEV_SCREEN_Y=320 CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set +# CONFIG_INPUT_APMPOWER is not set # # Input Device Drivers @@ -387,6 +430,7 @@ CONFIG_INPUT_KEYBOARD=y # CONFIG_KEYBOARD_NEWTON is not set # CONFIG_KEYBOARD_STOWAWAY is not set CONFIG_KEYBOARD_HP6XX=y +# CONFIG_KEYBOARD_SH_KEYSC is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set @@ -395,12 +439,15 @@ CONFIG_INPUT_TOUCHSCREEN=y # CONFIG_TOUCHSCREEN_GUNZE is not set # CONFIG_TOUCHSCREEN_ELO is not set # CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_INEXIO is not set # CONFIG_TOUCHSCREEN_MK712 is not set CONFIG_TOUCHSCREEN_HP600=y +# CONFIG_TOUCHSCREEN_HTCPEN is not set # CONFIG_TOUCHSCREEN_PENMOUNT is not set # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set # CONFIG_TOUCHSCREEN_TOUCHWIN is not set # CONFIG_TOUCHSCREEN_UCB1400 is not set +# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set # CONFIG_INPUT_MISC is not set # @@ -417,9 +464,11 @@ CONFIG_SERIO=y # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -439,7 +488,6 @@ CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=64 # CONFIG_IPMI_HANDLER is not set -# CONFIG_WATCHDOG is not set CONFIG_HW_RANDOM=y # CONFIG_DTLK is not set # CONFIG_R3964 is not set @@ -454,39 +502,45 @@ CONFIG_HW_RANDOM=y # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set -# CONFIG_DAB is not set +# CONFIG_VIDEO_MEDIA is not set # -# Graphics support +# Multimedia drivers # -CONFIG_BACKLIGHT_LCD_SUPPORT=y -CONFIG_LCD_CLASS_DEVICE=y -CONFIG_BACKLIGHT_CLASS_DEVICE=y -CONFIG_BACKLIGHT_HP680=y +# CONFIG_DAB is not set # -# Display device support +# Graphics support # -# CONFIG_DISPLAY_SUPPORT is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=y CONFIG_FB=y @@ -495,11 +549,12 @@ CONFIG_FIRMWARE_EDID=y CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set # CONFIG_FB_SYS_FILLRECT is not set # CONFIG_FB_SYS_COPYAREA is not set # CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set # CONFIG_FB_SYS_FOPS is not set -CONFIG_FB_DEFERRED_IO=y # CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set @@ -511,7 +566,20 @@ CONFIG_FB_DEFERRED_IO=y # # CONFIG_FB_S1D13XXX is not set CONFIG_FB_HIT=y +CONFIG_FB_SH_MOBILE_LCDC=y # CONFIG_FB_VIRTUAL is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_CLASS_DEVICE=y +# CONFIG_LCD_ILI9320 is not set +# CONFIG_LCD_PLATFORM is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +# CONFIG_BACKLIGHT_CORGI is not set +CONFIG_BACKLIGHT_HP680=y + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set # # Console display driver support @@ -533,15 +601,13 @@ CONFIG_FONT_PEARL_8x8=y # CONFIG_FONT_SUN12x22 is not set # CONFIG_FONT_10x18 is not set # CONFIG_LOGO is not set - -# -# Sound -# # CONFIG_SOUND is not set # CONFIG_HID_SUPPORT is not set # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y @@ -564,9 +630,10 @@ CONFIG_RTC_INTF_DEV=y # # Platform RTC drivers # +# CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T59 is not set # CONFIG_RTC_DRV_V3020 is not set @@ -575,23 +642,7 @@ CONFIG_RTC_INTF_DEV=y # on-CPU RTC drivers # CONFIG_RTC_DRV_SH=y - -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# - -# -# Userspace I/O -# +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # @@ -606,13 +657,10 @@ CONFIG_EXT2_FS=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -643,7 +691,6 @@ CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set # @@ -658,8 +705,11 @@ CONFIG_RAMFS=y # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set @@ -668,10 +718,6 @@ CONFIG_RAMFS=y # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_CODEPAGE_437 is not set @@ -714,22 +760,21 @@ CONFIG_NLS_CODEPAGE_850=y # CONFIG_NLS_UTF8 is not set # -# Profiling support -# -# CONFIG_PROFILING is not set - -# # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_SAMPLES is not set # CONFIG_SH_STANDARD_BIOS is not set # CONFIG_EARLY_SCIF_CONSOLE is not set # CONFIG_SH_KGDB is not set @@ -739,50 +784,95 @@ CONFIG_ENABLE_MUST_CHECK=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=y +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=y +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=y -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=y -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_CRYPTD is not set -# CONFIG_CRYPTO_DES is not set -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_LZO is not set # CONFIG_CRYPTO_HW is not set # # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set CONFIG_CRC16=y +CONFIG_CRC_T10DIF=y # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set diff --git a/arch/sh/configs/landisk_defconfig b/arch/sh/configs/landisk_defconfig index 38f934ab50c7..99cc39c5c6ca 100644 --- a/arch/sh/configs/landisk_defconfig +++ b/arch/sh/configs/landisk_defconfig @@ -1,44 +1,53 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.19 -# Thu Dec 7 17:13:04 2006 +# Linux kernel version: 2.6.26 +# Wed Jul 30 01:35:07 2008 # CONFIG_SUPERH=y +CONFIG_SUPERH32=y +CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_BUG=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_CALIBRATE_DELAY=y -# CONFIG_GENERIC_TIME is not set +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_SYS_SUPPORTS_PCI=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_NO_VIRT_TO_BUS=y +CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +# CONFIG_GROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set -CONFIG_INITRAMFS_SOURCE="" +# CONFIG_NAMESPACES is not set +# CONFIG_BLK_DEV_INITRD is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y CONFIG_EMBEDDED=y @@ -50,34 +59,48 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y +CONFIG_ANON_INODES=y CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set +# CONFIG_HAVE_IOREMAP_PROT is not set +# CONFIG_HAVE_KPROBES is not set +# CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_ARCH_TRACEHOOK is not set +# CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +CONFIG_HAVE_CLK=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y - -# -# Block layer -# CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -91,67 +114,26 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y # # System type # -# CONFIG_SH_SOLUTION_ENGINE is not set -# CONFIG_SH_7751_SOLUTION_ENGINE is not set -# CONFIG_SH_7300_SOLUTION_ENGINE is not set -# CONFIG_SH_7343_SOLUTION_ENGINE is not set -# CONFIG_SH_73180_SOLUTION_ENGINE is not set -# CONFIG_SH_7751_SYSTEMH is not set -# CONFIG_SH_HP6XX is not set -# CONFIG_SH_EC3104 is not set -# CONFIG_SH_SATURN is not set -# CONFIG_SH_DREAMCAST is not set -# CONFIG_SH_BIGSUR is not set -# CONFIG_SH_MPC1211 is not set -# CONFIG_SH_SH03 is not set -# CONFIG_SH_SECUREEDGE5410 is not set -# CONFIG_SH_HS7751RVOIP is not set -# CONFIG_SH_7710VOIPGW is not set -# CONFIG_SH_RTS7751R2D is not set -# CONFIG_SH_R7780RP is not set -# CONFIG_SH_EDOSK7705 is not set -# CONFIG_SH_SH4202_MICRODEV is not set -CONFIG_SH_LANDISK=y -# CONFIG_SH_TITAN is not set -# CONFIG_SH_SHMIN is not set -# CONFIG_SH_7206_SOLUTION_ENGINE is not set -# CONFIG_SH_7619_SOLUTION_ENGINE is not set -# CONFIG_SH_UNKNOWN is not set - -# -# Processor selection -# CONFIG_CPU_SH4=y - -# -# SH-2 Processor Support -# -# CONFIG_CPU_SUBTYPE_SH7604 is not set # CONFIG_CPU_SUBTYPE_SH7619 is not set - -# -# SH-2A Processor Support -# +# CONFIG_CPU_SUBTYPE_SH7203 is not set # CONFIG_CPU_SUBTYPE_SH7206 is not set - -# -# SH-3 Processor Support -# -# CONFIG_CPU_SUBTYPE_SH7300 is not set +# CONFIG_CPU_SUBTYPE_SH7263 is not set +# CONFIG_CPU_SUBTYPE_MXG is not set # CONFIG_CPU_SUBTYPE_SH7705 is not set # CONFIG_CPU_SUBTYPE_SH7706 is not set # CONFIG_CPU_SUBTYPE_SH7707 is not set # CONFIG_CPU_SUBTYPE_SH7708 is not set # CONFIG_CPU_SUBTYPE_SH7709 is not set # CONFIG_CPU_SUBTYPE_SH7710 is not set - -# -# SH-4 Processor Support -# +# CONFIG_CPU_SUBTYPE_SH7712 is not set +# CONFIG_CPU_SUBTYPE_SH7720 is not set +# CONFIG_CPU_SUBTYPE_SH7721 is not set # CONFIG_CPU_SUBTYPE_SH7750 is not set # CONFIG_CPU_SUBTYPE_SH7091 is not set # CONFIG_CPU_SUBTYPE_SH7750R is not set @@ -160,53 +142,60 @@ CONFIG_CPU_SH4=y CONFIG_CPU_SUBTYPE_SH7751R=y # CONFIG_CPU_SUBTYPE_SH7760 is not set # CONFIG_CPU_SUBTYPE_SH4_202 is not set - -# -# ST40 Processor Support -# -# CONFIG_CPU_SUBTYPE_ST40STB1 is not set -# CONFIG_CPU_SUBTYPE_ST40GX1 is not set - -# -# SH-4A Processor Support -# +# CONFIG_CPU_SUBTYPE_SH7723 is not set +# CONFIG_CPU_SUBTYPE_SH7763 is not set # CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set # CONFIG_CPU_SUBTYPE_SH7785 is not set - -# -# SH4AL-DSP Processor Support -# -# CONFIG_CPU_SUBTYPE_SH73180 is not set +# CONFIG_CPU_SUBTYPE_SHX3 is not set # CONFIG_CPU_SUBTYPE_SH7343 is not set +# CONFIG_CPU_SUBTYPE_SH7722 is not set +# CONFIG_CPU_SUBTYPE_SH7366 is not set +# CONFIG_CPU_SUBTYPE_SH5_101 is not set +# CONFIG_CPU_SUBTYPE_SH5_103 is not set # # Memory management options # +CONFIG_QUICKLIST=y CONFIG_MMU=y CONFIG_PAGE_OFFSET=0x80000000 CONFIG_MEMORY_START=0x0c000000 CONFIG_MEMORY_SIZE=0x04000000 +CONFIG_29BIT=y CONFIG_VSYSCALL=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_DEFAULT=y +CONFIG_MAX_ACTIVE_REGIONS=1 +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set +CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPARSEMEM_STATIC=y +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_NR_QUICK=2 # # Cache configuration # # CONFIG_SH_DIRECT_MAPPED is not set -# CONFIG_SH_WRITETHROUGH is not set -# CONFIG_SH_OCRAM is not set +CONFIG_CACHE_WRITEBACK=y +# CONFIG_CACHE_WRITETHROUGH is not set +# CONFIG_CACHE_OFF is not set # # Processor features @@ -214,19 +203,32 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_CPU_LITTLE_ENDIAN=y # CONFIG_CPU_BIG_ENDIAN is not set CONFIG_SH_FPU=y -# CONFIG_SH_DSP is not set # CONFIG_SH_STORE_QUEUES is not set CONFIG_CPU_HAS_INTEVT=y -CONFIG_CPU_HAS_INTC_IRQ=y CONFIG_CPU_HAS_SR_RB=y CONFIG_CPU_HAS_PTEA=y +CONFIG_CPU_HAS_FPU=y # -# Timer support +# Board support +# +# CONFIG_SH_7751_SYSTEMH is not set +# CONFIG_SH_SECUREEDGE5410 is not set +# CONFIG_SH_RTS7751R2D is not set +CONFIG_SH_LANDISK=y +# CONFIG_SH_TITAN is not set +# CONFIG_SH_LBOX_RE2 is not set + +# +# Timer and clock configuration # CONFIG_SH_TMU=y CONFIG_SH_TIMER_IRQ=16 CONFIG_SH_PCLK_FREQ=33333333 +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # # CPU Frequency scaling @@ -241,12 +243,11 @@ CONFIG_SH_PCLK_FREQ=33333333 # # Companion Chips # -# CONFIG_HD6446X_SERIES is not set -CONFIG_HEARTBEAT=y # # Additional SuperH Device Drivers # +CONFIG_HEARTBEAT=y # CONFIG_PUSH_SWITCH is not set # @@ -254,13 +255,17 @@ CONFIG_HEARTBEAT=y # # CONFIG_HZ_100 is not set CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set CONFIG_KEXEC=y -# CONFIG_SMP is not set +# CONFIG_CRASH_DUMP is not set CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set +CONFIG_GUSA=y +# CONFIG_GUSA_RB is not set # # Boot options @@ -273,16 +278,12 @@ CONFIG_BOOT_LINK_OFFSET=0x00800000 # # Bus options # -CONFIG_ISA=y CONFIG_PCI=y CONFIG_SH_PCIDMA_NONCOHERENT=y CONFIG_PCI_AUTO=y CONFIG_PCI_AUTO_UPDATE_RESOURCES=y -# CONFIG_PCI_MULTITHREAD_PROBE is not set - -# -# PCCARD (PCMCIA/CardBus) support -# +# CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_PCI_LEGACY=y CONFIG_PCCARD=y # CONFIG_PCMCIA_DEBUG is not set CONFIG_PCMCIA=y @@ -301,29 +302,16 @@ CONFIG_YENTA_ENE_TUNE=y CONFIG_YENTA_TOSHIBA=y # CONFIG_PD6729 is not set # CONFIG_I82092 is not set -# CONFIG_I82365 is not set -# CONFIG_TCIC is not set -CONFIG_PCMCIA_PROBE=y CONFIG_PCCARD_NONSTATIC=y - -# -# PCI Hotplug Support -# # CONFIG_HOTPLUG_PCI is not set # # Executable file formats # CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_FLAT is not set # CONFIG_BINFMT_MISC is not set # -# Power management options (EXPERIMENTAL) -# -# CONFIG_PM is not set - -# # Networking # CONFIG_NET=y @@ -331,13 +319,14 @@ CONFIG_NET=y # # Networking options # -# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -364,49 +353,36 @@ CONFIG_IP_PNP=y CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set - -# -# IP: Virtual Server Configuration -# # CONFIG_IP_VS is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set +CONFIG_NETFILTER_ADVANCED=y # # Core Netfilter Configuration # -# CONFIG_NETFILTER_NETLINK is not set -# CONFIG_NF_CONNTRACK_ENABLED is not set +# CONFIG_NETFILTER_NETLINK_QUEUE is not set +# CONFIG_NETFILTER_NETLINK_LOG is not set +# CONFIG_NF_CONNTRACK is not set # CONFIG_NETFILTER_XTABLES is not set # # IP: Netfilter Configuration # CONFIG_IP_NF_QUEUE=m - -# -# DCCP Configuration (EXPERIMENTAL) -# +# CONFIG_IP_NF_IPTABLES is not set +# CONFIG_IP_NF_ARPTABLES is not set # CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# # CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -421,10 +397,6 @@ CONFIG_ATALK=m # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set # @@ -432,9 +404,20 @@ CONFIG_ATALK=m # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -443,35 +426,17 @@ CONFIG_ATALK=m # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# # CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# # CONFIG_MTD is not set - -# -# Parallel port support -# # CONFIG_PARPORT is not set - -# -# Plug and Play support -# -# CONFIG_PNP is not set - -# -# Block devices -# -# CONFIG_BLK_CPQ_DA is not set +CONFIG_BLK_DEV=y # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_UMEM is not set @@ -484,63 +449,66 @@ CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 -# CONFIG_BLK_DEV_INITRD is not set +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set - -# -# Misc devices -# +# CONFIG_BLK_DEV_HD is not set +CONFIG_MISC_DEVICES=y +# CONFIG_PHANTOM is not set +# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set - -# -# ATA/ATAPI/MFM/RLL support -# +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set +CONFIG_HAVE_IDE=y CONFIG_IDE=y CONFIG_IDE_MAX_HWIFS=4 CONFIG_BLK_DEV_IDE=y # -# Please see Documentation/ide.txt for help/info on IDE drives +# Please see Documentation/ide/ide.txt for help/info on IDE drives # +CONFIG_IDE_ATAPI=y # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_BLK_DEV_IDEDISK=y # CONFIG_IDEDISK_MULTI_MODE is not set # CONFIG_BLK_DEV_IDECS is not set +# CONFIG_BLK_DEV_DELKIN is not set CONFIG_BLK_DEV_IDECD=y +CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y # CONFIG_BLK_DEV_IDETAPE is not set # CONFIG_BLK_DEV_IDEFLOPPY is not set CONFIG_BLK_DEV_IDESCSI=y # CONFIG_IDE_TASK_IOCTL is not set +CONFIG_IDE_PROC_FS=y # # IDE chipset support/bugfixes # -CONFIG_IDE_GENERIC=y +# CONFIG_BLK_DEV_PLATFORM is not set +CONFIG_BLK_DEV_IDEDMA_SFF=y + +# +# PCI IDE chipsets support +# CONFIG_BLK_DEV_IDEPCI=y -CONFIG_IDEPCI_SHARE_IRQ=y +CONFIG_IDEPCI_PCIBUS_ORDER=y CONFIG_BLK_DEV_OFFBOARD=y CONFIG_BLK_DEV_GENERIC=y # CONFIG_BLK_DEV_OPTI621 is not set CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -CONFIG_IDEDMA_PCI_AUTO=y -CONFIG_IDEDMA_ONLYDISK=y CONFIG_BLK_DEV_AEC62XX=y # CONFIG_BLK_DEV_ALI15X3 is not set # CONFIG_BLK_DEV_AMD74XX is not set # CONFIG_BLK_DEV_CMD64X is not set # CONFIG_BLK_DEV_TRIFLEX is not set -# CONFIG_BLK_DEV_CY82C693 is not set # CONFIG_BLK_DEV_CS5520 is not set # CONFIG_BLK_DEV_CS5530 is not set -# CONFIG_BLK_DEV_HPT34X is not set # CONFIG_BLK_DEV_HPT366 is not set # CONFIG_BLK_DEV_JMICRON is not set # CONFIG_BLK_DEV_SC1200 is not set # CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT8213 is not set # CONFIG_BLK_DEV_IT821X is not set # CONFIG_BLK_DEV_NS87415 is not set # CONFIG_BLK_DEV_PDC202XX_OLD is not set @@ -550,18 +518,15 @@ CONFIG_BLK_DEV_AEC62XX=y # CONFIG_BLK_DEV_SLC90E66 is not set # CONFIG_BLK_DEV_TRM290 is not set # CONFIG_BLK_DEV_VIA82CXXX is not set -# CONFIG_IDE_ARM is not set -# CONFIG_IDE_CHIPSETS is not set +# CONFIG_BLK_DEV_TC86C001 is not set CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_IDEDMA_IVB is not set -CONFIG_IDEDMA_AUTO=y -# CONFIG_BLK_DEV_HD is not set # # SCSI device support # # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y +CONFIG_SCSI_DMA=y # CONFIG_SCSI_TGT is not set # CONFIG_SCSI_NETLINK is not set CONFIG_SCSI_PROC_FS=y @@ -583,6 +548,7 @@ CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set # CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m # # SCSI Transports @@ -590,77 +556,43 @@ CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set - -# -# SCSI low-level drivers -# +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set -# CONFIG_SCSI_AHA152X is not set # CONFIG_SCSI_AACRAID is not set # CONFIG_SCSI_AIC7XXX is not set # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set -# CONFIG_SCSI_DPT_I2O is not set -# CONFIG_SCSI_IN2000 is not set # CONFIG_SCSI_ARCMSR is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_DTC3280 is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GENERIC_NCR5380 is not set -# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_NCR53C406A is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set -# CONFIG_SCSI_PAS16 is not set -# CONFIG_SCSI_PSI240I is not set -# CONFIG_SCSI_QLOGIC_FAS is not set # CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_QLA_FC is not set # CONFIG_SCSI_QLA_ISCSI is not set # CONFIG_SCSI_LPFC is not set -# CONFIG_SCSI_SYM53C416 is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set -# CONFIG_SCSI_T128 is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set - -# -# PCMCIA SCSI adapter support -# -# CONFIG_PCMCIA_AHA152X is not set -# CONFIG_PCMCIA_FDOMAIN is not set -# CONFIG_PCMCIA_NINJA_SCSI is not set -# CONFIG_PCMCIA_QLOGIC is not set -# CONFIG_PCMCIA_SYM53C500 is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# +# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set +# CONFIG_SCSI_DH is not set # CONFIG_ATA is not set - -# -# Old CD-ROM drivers (not SCSI, not IDE) -# -# CONFIG_CD_NO_IDESCSI is not set - -# -# Multi-device support (RAID and LVM) -# CONFIG_MD=y CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m @@ -671,76 +603,49 @@ CONFIG_MD_RAID1=m # CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set # CONFIG_BLK_DEV_DM is not set - -# -# Fusion MPT device support -# # CONFIG_FUSION is not set -# CONFIG_FUSION_SPI is not set -# CONFIG_FUSION_FC is not set -# CONFIG_FUSION_SAS is not set # # IEEE 1394 (FireWire) support # -# CONFIG_IEEE1394 is not set # -# I2O device support +# Enable only one of the two stacks, unless you know what you are doing # +# CONFIG_FIREWIRE is not set +# CONFIG_IEEE1394 is not set # CONFIG_I2O is not set - -# -# Network device support -# CONFIG_NETDEVICES=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set CONFIG_TUN=m - -# -# ARCnet devices -# +# CONFIG_VETH is not set # CONFIG_ARCNET is not set - -# -# PHY device support -# # CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# CONFIG_NET_ETHERNET=y CONFIG_MII=y +# CONFIG_AX88796 is not set # CONFIG_STNIC is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set -# CONFIG_NET_VENDOR_SMC is not set # CONFIG_SMC91X is not set -# CONFIG_NET_VENDOR_RACAL is not set - -# -# Tulip family network device support -# +# CONFIG_SMC911X is not set # CONFIG_NET_TULIP is not set -# CONFIG_AT1700 is not set -# CONFIG_DEPCA is not set # CONFIG_HP100 is not set -# CONFIG_NET_ISA is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set # CONFIG_ADAPTEC_STARFIRE is not set -# CONFIG_AC3200 is not set -# CONFIG_APRICOT is not set # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set -# CONFIG_CS89x0 is not set -# CONFIG_DGRS is not set # CONFIG_EEPRO100 is not set # CONFIG_E100 is not set # CONFIG_FEALNX is not set @@ -748,18 +653,20 @@ CONFIG_NET_PCI=y # CONFIG_NE2K_PCI is not set CONFIG_8139CP=y # CONFIG_8139TOO is not set +# CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set - -# -# Ethernet (1000 Mbit) -# +# CONFIG_SC92031 is not set +CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set +# CONFIG_E1000E is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -767,58 +674,53 @@ CONFIG_8139CP=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set # CONFIG_QLA3XXX is not set - -# -# Ethernet (10000 Mbit) -# +# CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set +CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set +# CONFIG_CHELSIO_T3 is not set +# CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set - -# -# Token Ring devices -# +# CONFIG_NIU is not set +# CONFIG_MLX4_CORE is not set +# CONFIG_TEHUTI is not set +# CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # -# Wireless LAN (non-hamradio) +# Wireless LAN # -# CONFIG_NET_RADIO is not set +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # -# PCMCIA network device support +# USB Network Adapters # +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +CONFIG_USB_PEGASUS=m +CONFIG_USB_RTL8150=m +# CONFIG_USB_USBNET is not set # CONFIG_NET_PCMCIA is not set - -# -# Wan interfaces -# # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set - -# -# Telephony Support -# # CONFIG_PHONE is not set # @@ -826,6 +728,7 @@ CONFIG_8139CP=y # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces @@ -835,7 +738,6 @@ CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set @@ -845,6 +747,7 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set @@ -858,10 +761,13 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set # # Serial drivers @@ -880,22 +786,10 @@ CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set CONFIG_HW_RANDOM=y -# CONFIG_GEN_RTC is not set -# CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set -# CONFIG_DRM is not set # # PCMCIA character devices @@ -903,65 +797,77 @@ CONFIG_HW_RANDOM=y # CONFIG_SYNCLINK_CS is not set # CONFIG_CARDMAN_4000 is not set # CONFIG_CARDMAN_4040 is not set +# CONFIG_IPWIRELESS is not set # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# # CONFIG_TCG_TPM is not set - -# -# I2C support -# +CONFIG_DEVPORT=y # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# # CONFIG_W1 is not set - -# -# Hardware Monitoring support -# +# CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_I5K_AMB is not set # CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SIS5595 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_VT8231 is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # -CONFIG_VIDEO_DEV=m -CONFIG_VIDEO_V4L1=y -CONFIG_VIDEO_V4L1_COMPAT=y -CONFIG_VIDEO_V4L2=y # -# Video Capture Adapters +# Multimedia core support # +CONFIG_VIDEO_DEV=m +CONFIG_VIDEO_V4L2_COMMON=m +CONFIG_VIDEO_ALLOW_V4L1=y +CONFIG_VIDEO_V4L1_COMPAT=y +# CONFIG_DVB_CORE is not set +CONFIG_VIDEO_MEDIA=m # -# Video Capture Adapters +# Multimedia drivers # +# CONFIG_MEDIA_ATTACH is not set +CONFIG_VIDEO_V4L2=m +CONFIG_VIDEO_V4L1=m +CONFIG_VIDEO_CAPTURE_DRIVERS=y # CONFIG_VIDEO_ADV_DEBUG is not set CONFIG_VIDEO_HELPER_CHIPS_AUTO=y # CONFIG_VIDEO_VIVI is not set -# CONFIG_VIDEO_PMS is not set # CONFIG_VIDEO_CPIA is not set # CONFIG_VIDEO_CPIA2 is not set -# CONFIG_VIDEO_STRADIS is not set - -# -# V4L USB devices -# +CONFIG_V4L_USB_DRIVERS=y +# CONFIG_USB_VIDEO_CLASS is not set +# CONFIG_USB_GSPCA is not set CONFIG_VIDEO_USBVIDEO=m CONFIG_USB_VICAM=m CONFIG_USB_IBMCAM=m @@ -975,106 +881,100 @@ CONFIG_USB_STV680=m # CONFIG_USB_ZC0301 is not set CONFIG_USB_PWC=m # CONFIG_USB_PWC_DEBUG is not set - -# -# Radio Adapters -# -# CONFIG_RADIO_CADET is not set -# CONFIG_RADIO_RTRACK is not set -# CONFIG_RADIO_RTRACK2 is not set -# CONFIG_RADIO_AZTECH is not set -# CONFIG_RADIO_GEMTEK is not set +# CONFIG_USB_ZR364XX is not set +# CONFIG_USB_STKWEBCAM is not set +# CONFIG_USB_S2255 is not set +# CONFIG_SOC_CAMERA is not set +# CONFIG_VIDEO_SH_MOBILE_CEU is not set +CONFIG_RADIO_ADAPTERS=y # CONFIG_RADIO_GEMTEK_PCI is not set # CONFIG_RADIO_MAXIRADIO is not set # CONFIG_RADIO_MAESTRO is not set -# CONFIG_RADIO_SF16FMI is not set -# CONFIG_RADIO_SF16FMR2 is not set -# CONFIG_RADIO_TERRATEC is not set -# CONFIG_RADIO_TRUST is not set -# CONFIG_RADIO_TYPHOON is not set -# CONFIG_RADIO_ZOLTRIX is not set CONFIG_USB_DSBR=m +# CONFIG_USB_SI470X is not set +# CONFIG_DAB is not set # -# Digital Video Broadcasting Devices +# Graphics support # -# CONFIG_DVB is not set -CONFIG_USB_DABUSB=m +# CONFIG_DRM is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # -# Graphics support +# Display device support # -CONFIG_FIRMWARE_EDID=y -# CONFIG_FB is not set +# CONFIG_DISPLAY_SUPPORT is not set # # Console display driver support # -# CONFIG_MDA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y CONFIG_FONT_8x16=y -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Sound -# CONFIG_SOUND=m - -# -# Advanced Linux Sound Architecture -# # CONFIG_SND is not set +CONFIG_SOUND_PRIME=m +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set # -# Open Sound System +# USB Input Devices # -CONFIG_SOUND_PRIME=m -# CONFIG_OSS_OBSOLETE_DRIVER is not set -# CONFIG_SOUND_BT878 is not set -# CONFIG_SOUND_ES1371 is not set -# CONFIG_SOUND_ICH is not set -# CONFIG_SOUND_TRIDENT is not set -# CONFIG_SOUND_MSNDCLAS is not set -# CONFIG_SOUND_MSNDPIN is not set -# CONFIG_SOUND_VIA82CXXX is not set +CONFIG_USB_HID=m +# CONFIG_USB_HIDINPUT_POWERBOOK is not set +# CONFIG_HID_FF is not set +# CONFIG_USB_HIDDEV is not set # -# USB support +# USB HID Boot Protocol drivers # +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set +CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set # # Miscellaneous USB options # CONFIG_USB_DEVICEFS=y -# CONFIG_USB_BANDWIDTH is not set +CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_MULTITHREAD_PROBE is not set # CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set CONFIG_USB_EHCI_HCD=y -# CONFIG_USB_EHCI_SPLIT_ISO is not set # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y -# CONFIG_USB_OHCI_BIG_ENDIAN is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set # # USB Device Class drivers # # CONFIG_USB_ACM is not set CONFIG_USB_PRINTER=m +# CONFIG_USB_WDM is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1094,66 +994,28 @@ CONFIG_USB_STORAGE_SDDR09=y CONFIG_USB_STORAGE_SDDR55=y CONFIG_USB_STORAGE_JUMPSHOT=y # CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set # -# USB Input Devices -# -CONFIG_USB_HID=m -CONFIG_USB_HIDINPUT=y -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set -# CONFIG_USB_HIDDEV is not set - -# -# USB HID Boot Protocol drivers -# -# CONFIG_USB_KBD is not set -# CONFIG_USB_MOUSE is not set -# CONFIG_USB_AIPTEK is not set -# CONFIG_USB_WACOM is not set -# CONFIG_USB_ACECAD is not set -# CONFIG_USB_KBTAB is not set -# CONFIG_USB_POWERMATE is not set -# CONFIG_USB_TOUCHSCREEN is not set -# CONFIG_USB_YEALINK is not set -# CONFIG_USB_XPAD is not set -# CONFIG_USB_ATI_REMOTE is not set -# CONFIG_USB_ATI_REMOTE2 is not set -# CONFIG_USB_KEYSPAN_REMOTE is not set -# CONFIG_USB_APPLETOUCH is not set - -# # USB Imaging devices # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set - -# -# USB Network Adapters -# -# CONFIG_USB_CATC is not set -# CONFIG_USB_KAWETH is not set -CONFIG_USB_PEGASUS=m -CONFIG_USB_RTL8150=m -# CONFIG_USB_USBNET_MII is not set -# CONFIG_USB_USBNET is not set CONFIG_USB_MON=y # # USB port drivers # - -# -# USB Serial Converter support -# CONFIG_USB_SERIAL=m +# CONFIG_USB_EZUSB is not set # CONFIG_USB_SERIAL_GENERIC is not set # CONFIG_USB_SERIAL_AIRCABLE is not set -# CONFIG_USB_SERIAL_AIRPRIME is not set # CONFIG_USB_SERIAL_ARK3116 is not set # CONFIG_USB_SERIAL_BELKIN is not set +# CONFIG_USB_SERIAL_CH341 is not set # CONFIG_USB_SERIAL_WHITEHEAT is not set # CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set # CONFIG_USB_SERIAL_CP2101 is not set @@ -1168,6 +1030,7 @@ CONFIG_USB_SERIAL_FTDI_SIO=m # CONFIG_USB_SERIAL_EDGEPORT_TI is not set # CONFIG_USB_SERIAL_GARMIN is not set # CONFIG_USB_SERIAL_IPW is not set +# CONFIG_USB_SERIAL_IUU is not set # CONFIG_USB_SERIAL_KEYSPAN_PDA is not set # CONFIG_USB_SERIAL_KEYSPAN is not set # CONFIG_USB_SERIAL_KLSI is not set @@ -1175,8 +1038,11 @@ CONFIG_USB_SERIAL_FTDI_SIO=m # CONFIG_USB_SERIAL_MCT_U232 is not set # CONFIG_USB_SERIAL_MOS7720 is not set # CONFIG_USB_SERIAL_MOS7840 is not set +# CONFIG_USB_SERIAL_MOTOROLA is not set # CONFIG_USB_SERIAL_NAVMAN is not set CONFIG_USB_SERIAL_PL2303=m +# CONFIG_USB_SERIAL_OTI6858 is not set +# CONFIG_USB_SERIAL_SPCP8X5 is not set # CONFIG_USB_SERIAL_HP4X is not set # CONFIG_USB_SERIAL_SAFE is not set # CONFIG_USB_SERIAL_SIERRAWIRELESS is not set @@ -1197,6 +1063,7 @@ CONFIG_USB_EMI26=m # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set @@ -1208,61 +1075,18 @@ CONFIG_USB_SISUSBVGA=m CONFIG_USB_SISUSBVGA_CON=y # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# +# CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# # CONFIG_MMC is not set - -# -# LED devices -# +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set - -# -# LED drivers -# - -# -# LED Triggers -# - -# -# InfiniBand support -# +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set - -# -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# - -# -# Real Time Clock -# # CONFIG_RTC_CLASS is not set - -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# +# CONFIG_DMADEVICES is not set +# CONFIG_UIO is not set # # File systems @@ -1276,7 +1100,6 @@ CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_SECURITY is not set # CONFIG_EXT4DEV_FS is not set CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y CONFIG_REISERFS_FS=y # CONFIG_REISERFS_CHECK is not set @@ -1285,14 +1108,11 @@ CONFIG_REISERFS_FS=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -CONFIG_ROMFS_FS=y +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -1328,7 +1148,6 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set # @@ -1343,26 +1162,24 @@ CONFIG_RAMFS=y # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +CONFIG_ROMFS_FS=y # CONFIG_SYSV_FS is not set CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set # CONFIG_UFS_DEBUG is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=m CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set CONFIG_NFSD=m CONFIG_NFSD_V3=y # CONFIG_NFSD_V3_ACL is not set # CONFIG_NFSD_V4 is not set -CONFIG_NFSD_TCP=y CONFIG_LOCKD=m CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=m @@ -1376,17 +1193,12 @@ CONFIG_SMB_FS=m # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=y @@ -1427,46 +1239,128 @@ CONFIG_NLS_CODEPAGE_932=y # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set - -# -# Profiling support -# -# CONFIG_PROFILING is not set +# CONFIG_DLM is not set # # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_SAMPLES is not set CONFIG_SH_STANDARD_BIOS=y # CONFIG_EARLY_SCIF_CONSOLE is not set # CONFIG_EARLY_PRINTK is not set -# CONFIG_KGDB is not set +# CONFIG_SH_KGDB is not set # # Security options # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set # -# Cryptographic options +# Compression # -# CONFIG_CRYPTO is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_HIFN_795X is not set # # Library routines # +CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +CONFIG_CRC_T10DIF=y +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/sh/configs/lboxre2_defconfig b/arch/sh/configs/lboxre2_defconfig index b68b6cdbb78f..aecdfd33c695 100644 --- a/arch/sh/configs/lboxre2_defconfig +++ b/arch/sh/configs/lboxre2_defconfig @@ -1,9 +1,11 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.21-rc4 -# Sat Mar 24 22:04:27 2007 +# Linux kernel version: 2.6.26 +# Wed Jul 30 01:39:41 2008 # CONFIG_SUPERH=y +CONFIG_SUPERH32=y +CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_FIND_NEXT_BIT=y @@ -11,37 +13,40 @@ CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_CALIBRATE_DELAY=y -# CONFIG_GENERIC_TIME is not set +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_SYS_SUPPORTS_PCI=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_NO_VIRT_TO_BUS=y +CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +# CONFIG_GROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set # CONFIG_BLK_DEV_INITRD is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y @@ -54,34 +59,48 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y +CONFIG_ANON_INODES=y CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set +# CONFIG_HAVE_IOREMAP_PROT is not set +# CONFIG_HAVE_KPROBES is not set +# CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_ARCH_TRACEHOOK is not set +# CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +CONFIG_HAVE_CLK=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y - -# -# Block layer -# CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -95,66 +114,26 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y # # System type # -# CONFIG_SH_SOLUTION_ENGINE is not set -# CONFIG_SH_7751_SOLUTION_ENGINE is not set -# CONFIG_SH_7300_SOLUTION_ENGINE is not set -# CONFIG_SH_7343_SOLUTION_ENGINE is not set -# CONFIG_SH_73180_SOLUTION_ENGINE is not set -# CONFIG_SH_7751_SYSTEMH is not set -# CONFIG_SH_HP6XX is not set -# CONFIG_SH_SATURN is not set -# CONFIG_SH_DREAMCAST is not set -# CONFIG_SH_MPC1211 is not set -# CONFIG_SH_SH03 is not set -# CONFIG_SH_SECUREEDGE5410 is not set -# CONFIG_SH_HS7751RVOIP is not set -# CONFIG_SH_7710VOIPGW is not set -# CONFIG_SH_RTS7751R2D is not set -# CONFIG_SH_HIGHLANDER is not set -# CONFIG_SH_EDOSK7705 is not set -# CONFIG_SH_SH4202_MICRODEV is not set -# CONFIG_SH_LANDISK is not set -# CONFIG_SH_TITAN is not set -# CONFIG_SH_SHMIN is not set -# CONFIG_SH_7206_SOLUTION_ENGINE is not set -# CONFIG_SH_7619_SOLUTION_ENGINE is not set -CONFIG_SH_LBOX_RE2=y -# CONFIG_SH_UNKNOWN is not set - -# -# Processor selection -# CONFIG_CPU_SH4=y - -# -# SH-2 Processor Support -# -# CONFIG_CPU_SUBTYPE_SH7604 is not set # CONFIG_CPU_SUBTYPE_SH7619 is not set - -# -# SH-2A Processor Support -# +# CONFIG_CPU_SUBTYPE_SH7203 is not set # CONFIG_CPU_SUBTYPE_SH7206 is not set - -# -# SH-3 Processor Support -# -# CONFIG_CPU_SUBTYPE_SH7300 is not set +# CONFIG_CPU_SUBTYPE_SH7263 is not set +# CONFIG_CPU_SUBTYPE_MXG is not set # CONFIG_CPU_SUBTYPE_SH7705 is not set # CONFIG_CPU_SUBTYPE_SH7706 is not set # CONFIG_CPU_SUBTYPE_SH7707 is not set # CONFIG_CPU_SUBTYPE_SH7708 is not set # CONFIG_CPU_SUBTYPE_SH7709 is not set # CONFIG_CPU_SUBTYPE_SH7710 is not set - -# -# SH-4 Processor Support -# +# CONFIG_CPU_SUBTYPE_SH7712 is not set +# CONFIG_CPU_SUBTYPE_SH7720 is not set +# CONFIG_CPU_SUBTYPE_SH7721 is not set # CONFIG_CPU_SUBTYPE_SH7750 is not set # CONFIG_CPU_SUBTYPE_SH7091 is not set # CONFIG_CPU_SUBTYPE_SH7750R is not set @@ -163,55 +142,60 @@ CONFIG_CPU_SH4=y CONFIG_CPU_SUBTYPE_SH7751R=y # CONFIG_CPU_SUBTYPE_SH7760 is not set # CONFIG_CPU_SUBTYPE_SH4_202 is not set - -# -# ST40 Processor Support -# -# CONFIG_CPU_SUBTYPE_ST40STB1 is not set -# CONFIG_CPU_SUBTYPE_ST40GX1 is not set - -# -# SH-4A Processor Support -# +# CONFIG_CPU_SUBTYPE_SH7723 is not set +# CONFIG_CPU_SUBTYPE_SH7763 is not set # CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set # CONFIG_CPU_SUBTYPE_SH7785 is not set - -# -# SH4AL-DSP Processor Support -# -# CONFIG_CPU_SUBTYPE_SH73180 is not set +# CONFIG_CPU_SUBTYPE_SHX3 is not set # CONFIG_CPU_SUBTYPE_SH7343 is not set # CONFIG_CPU_SUBTYPE_SH7722 is not set +# CONFIG_CPU_SUBTYPE_SH7366 is not set +# CONFIG_CPU_SUBTYPE_SH5_101 is not set +# CONFIG_CPU_SUBTYPE_SH5_103 is not set # # Memory management options # +CONFIG_QUICKLIST=y CONFIG_MMU=y CONFIG_PAGE_OFFSET=0x80000000 CONFIG_MEMORY_START=0x0c000000 CONFIG_MEMORY_SIZE=0x04000000 +CONFIG_29BIT=y CONFIG_VSYSCALL=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_DEFAULT=y +CONFIG_MAX_ACTIVE_REGIONS=1 +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set +CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPARSEMEM_STATIC=y +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 +CONFIG_NR_QUICK=2 # # Cache configuration # # CONFIG_SH_DIRECT_MAPPED is not set -# CONFIG_SH_WRITETHROUGH is not set -# CONFIG_SH_OCRAM is not set +CONFIG_CACHE_WRITEBACK=y +# CONFIG_CACHE_WRITETHROUGH is not set +# CONFIG_CACHE_OFF is not set # # Processor features @@ -219,12 +203,21 @@ CONFIG_ZONE_DMA_FLAG=0 CONFIG_CPU_LITTLE_ENDIAN=y # CONFIG_CPU_BIG_ENDIAN is not set CONFIG_SH_FPU=y -# CONFIG_SH_DSP is not set # CONFIG_SH_STORE_QUEUES is not set CONFIG_CPU_HAS_INTEVT=y -CONFIG_CPU_HAS_INTC_IRQ=y CONFIG_CPU_HAS_SR_RB=y CONFIG_CPU_HAS_PTEA=y +CONFIG_CPU_HAS_FPU=y + +# +# Board support +# +# CONFIG_SH_7751_SYSTEMH is not set +# CONFIG_SH_SECUREEDGE5410 is not set +# CONFIG_SH_RTS7751R2D is not set +# CONFIG_SH_LANDISK is not set +# CONFIG_SH_TITAN is not set +CONFIG_SH_LBOX_RE2=y # # Timer and clock configuration @@ -232,6 +225,10 @@ CONFIG_CPU_HAS_PTEA=y CONFIG_SH_TMU=y CONFIG_SH_TIMER_IRQ=16 CONFIG_SH_PCLK_FREQ=40000000 +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # # CPU Frequency scaling @@ -246,7 +243,6 @@ CONFIG_SH_PCLK_FREQ=40000000 # # Companion Chips # -# CONFIG_HD6446X_SERIES is not set # # Additional SuperH Device Drivers @@ -262,11 +258,14 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set CONFIG_KEXEC=y -# CONFIG_SMP is not set +# CONFIG_CRASH_DUMP is not set CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set +CONFIG_GUSA=y +# CONFIG_GUSA_RB is not set # # Boot options @@ -280,15 +279,12 @@ CONFIG_CMDLINE="console=ttySC1,115200 root=/dev/sda1" # # Bus options # -CONFIG_ISA=y CONFIG_PCI=y CONFIG_SH_PCIDMA_NONCOHERENT=y CONFIG_PCI_AUTO=y CONFIG_PCI_AUTO_UPDATE_RESOURCES=y - -# -# PCCARD (PCMCIA/CardBus) support -# +# CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_PCI_LEGACY=y CONFIG_PCCARD=y CONFIG_PCMCIA_DEBUG=y CONFIG_PCMCIA=y @@ -306,29 +302,16 @@ CONFIG_YENTA_O2=y # CONFIG_YENTA_TOSHIBA is not set # CONFIG_PD6729 is not set # CONFIG_I82092 is not set -# CONFIG_I82365 is not set -# CONFIG_TCIC is not set -CONFIG_PCMCIA_PROBE=y CONFIG_PCCARD_NONSTATIC=y - -# -# PCI Hotplug Support -# # CONFIG_HOTPLUG_PCI is not set # # Executable file formats # CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_FLAT is not set # CONFIG_BINFMT_MISC is not set # -# Power management options (EXPERIMENTAL) -# -# CONFIG_PM is not set - -# # Networking # CONFIG_NET=y @@ -336,7 +319,6 @@ CONFIG_NET=y # # Networking options # -# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -344,6 +326,7 @@ CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -370,29 +353,26 @@ CONFIG_IP_PNP=y CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set - -# -# IP: Virtual Server Configuration -# # CONFIG_IP_VS is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set +CONFIG_NETFILTER_ADVANCED=y # # Core Netfilter Configuration # -# CONFIG_NETFILTER_NETLINK is not set -# CONFIG_NF_CONNTRACK_ENABLED is not set +# CONFIG_NETFILTER_NETLINK_QUEUE is not set +# CONFIG_NETFILTER_NETLINK_LOG is not set +# CONFIG_NF_CONNTRACK is not set # CONFIG_NETFILTER_XTABLES is not set # @@ -401,20 +381,8 @@ CONFIG_NETFILTER=y # CONFIG_IP_NF_QUEUE is not set # CONFIG_IP_NF_IPTABLES is not set # CONFIG_IP_NF_ARPTABLES is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# # CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# # CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -427,10 +395,6 @@ CONFIG_NETFILTER=y # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set # @@ -438,9 +402,20 @@ CONFIG_NETFILTER=y # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -449,36 +424,17 @@ CONFIG_NETFILTER=y # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# # CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# # CONFIG_MTD is not set - -# -# Parallel port support -# # CONFIG_PARPORT is not set - -# -# Plug and Play support -# -# CONFIG_PNP is not set -# CONFIG_PNPACPI is not set - -# -# Block devices -# -# CONFIG_BLK_CPQ_DA is not set +CONFIG_BLK_DEV=y # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_UMEM is not set @@ -490,19 +446,18 @@ CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set - -# -# Misc devices -# +# CONFIG_BLK_DEV_HD is not set +CONFIG_MISC_DEVICES=y +# CONFIG_PHANTOM is not set +# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set - -# -# ATA/ATAPI/MFM/RLL support -# +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -510,6 +465,7 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y +CONFIG_SCSI_DMA=y # CONFIG_SCSI_TGT is not set # CONFIG_SCSI_NETLINK is not set CONFIG_SCSI_PROC_FS=y @@ -531,6 +487,7 @@ CONFIG_BLK_DEV_SD=y # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set # CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m # # SCSI Transports @@ -538,71 +495,49 @@ CONFIG_BLK_DEV_SD=y # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set - -# -# SCSI low-level drivers -# +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set -# CONFIG_SCSI_AHA152X is not set # CONFIG_SCSI_AACRAID is not set # CONFIG_SCSI_AIC7XXX is not set # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set -# CONFIG_SCSI_DPT_I2O is not set -# CONFIG_SCSI_IN2000 is not set # CONFIG_SCSI_ARCMSR is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_DTC3280 is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GENERIC_NCR5380 is not set -# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_NCR53C406A is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_PAS16 is not set -# CONFIG_SCSI_PSI240I is not set -# CONFIG_SCSI_QLOGIC_FAS is not set # CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_QLA_FC is not set # CONFIG_SCSI_QLA_ISCSI is not set # CONFIG_SCSI_LPFC is not set -# CONFIG_SCSI_SYM53C416 is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set -# CONFIG_SCSI_T128 is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set - -# -# PCMCIA SCSI adapter support -# -# CONFIG_PCMCIA_AHA152X is not set -# CONFIG_PCMCIA_FDOMAIN is not set -# CONFIG_PCMCIA_NINJA_SCSI is not set -# CONFIG_PCMCIA_QLOGIC is not set -# CONFIG_PCMCIA_SYM53C500 is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# +# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set +# CONFIG_SCSI_DH is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_SATA_PMP=y # CONFIG_SATA_AHCI is not set +# CONFIG_SATA_SIL24 is not set +CONFIG_ATA_SFF=y # CONFIG_SATA_SVW is not set # CONFIG_ATA_PIIX is not set # CONFIG_SATA_MV is not set @@ -612,7 +547,6 @@ CONFIG_ATA=y # CONFIG_SATA_PROMISE is not set # CONFIG_SATA_SX4 is not set # CONFIG_SATA_SIL is not set -# CONFIG_SATA_SIL24 is not set # CONFIG_SATA_SIS is not set # CONFIG_SATA_ULI is not set # CONFIG_SATA_VIA is not set @@ -622,6 +556,7 @@ CONFIG_ATA=y # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set # CONFIG_PATA_ATIIXP is not set +# CONFIG_PATA_CMD640_PCI is not set # CONFIG_PATA_CMD64X is not set # CONFIG_PATA_CS5520 is not set # CONFIG_PATA_CS5530 is not set @@ -635,18 +570,18 @@ CONFIG_ATA=y # CONFIG_PATA_IT821X is not set # CONFIG_PATA_IT8213 is not set # CONFIG_PATA_JMICRON is not set -# CONFIG_PATA_LEGACY is not set # CONFIG_PATA_TRIFLEX is not set # CONFIG_PATA_MARVELL is not set # CONFIG_PATA_MPIIX is not set # CONFIG_PATA_OLDPIIX is not set # CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NINJA32 is not set # CONFIG_PATA_NS87410 is not set +# CONFIG_PATA_NS87415 is not set # CONFIG_PATA_OPTI is not set # CONFIG_PATA_OPTIDMA is not set # CONFIG_PATA_PCMCIA is not set # CONFIG_PATA_PDC_OLD is not set -# CONFIG_PATA_QDI is not set # CONFIG_PATA_RADISYS is not set # CONFIG_PATA_RZ1000 is not set # CONFIG_PATA_SC1200 is not set @@ -656,88 +591,52 @@ CONFIG_ATA=y # CONFIG_PATA_SIS is not set # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set -# CONFIG_PATA_WINBOND_VLB is not set CONFIG_PATA_PLATFORM=y - -# -# Old CD-ROM drivers (not SCSI, not IDE) -# -# CONFIG_CD_NO_IDESCSI is not set - -# -# Multi-device support (RAID and LVM) -# +# CONFIG_PATA_SCH is not set # CONFIG_MD is not set - -# -# Fusion MPT device support -# # CONFIG_FUSION is not set -# CONFIG_FUSION_SPI is not set -# CONFIG_FUSION_FC is not set -# CONFIG_FUSION_SAS is not set # # IEEE 1394 (FireWire) support # -# CONFIG_IEEE1394 is not set # -# I2O device support +# Enable only one of the two stacks, unless you know what you are doing # +# CONFIG_FIREWIRE is not set +# CONFIG_IEEE1394 is not set # CONFIG_I2O is not set - -# -# Network device support -# CONFIG_NETDEVICES=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set - -# -# ARCnet devices -# +# CONFIG_VETH is not set # CONFIG_ARCNET is not set - -# -# PHY device support -# # CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# CONFIG_NET_ETHERNET=y CONFIG_MII=y +# CONFIG_AX88796 is not set # CONFIG_STNIC is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set -# CONFIG_NET_VENDOR_SMC is not set # CONFIG_SMC91X is not set -# CONFIG_NET_VENDOR_RACAL is not set - -# -# Tulip family network device support -# +# CONFIG_SMC911X is not set # CONFIG_NET_TULIP is not set -# CONFIG_AT1700 is not set -# CONFIG_DEPCA is not set # CONFIG_HP100 is not set -# CONFIG_NET_ISA is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set # CONFIG_ADAPTEC_STARFIRE is not set -# CONFIG_AC3200 is not set -# CONFIG_APRICOT is not set # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set -# CONFIG_CS89x0 is not set -# CONFIG_DGRS is not set # CONFIG_EEPRO100 is not set # CONFIG_E100 is not set # CONFIG_FEALNX is not set @@ -749,19 +648,20 @@ CONFIG_8139TOO_PIO=y CONFIG_8139TOO_TUNE_TWISTER=y # CONFIG_8139TOO_8129 is not set # CONFIG_8139_OLD_RX_RESET is not set +# CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set - -# -# Ethernet (1000 Mbit) -# +CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set +# CONFIG_E1000E is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -769,36 +669,33 @@ CONFIG_8139TOO_TUNE_TWISTER=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set - -# -# Ethernet (10000 Mbit) -# +# CONFIG_ATL1E is not set +CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set - -# -# Token Ring devices -# +# CONFIG_NIU is not set +# CONFIG_MLX4_CORE is not set +# CONFIG_TEHUTI is not set +# CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# PCMCIA network device support +# Wireless LAN # +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set CONFIG_NET_PCMCIA=y # CONFIG_PCMCIA_3C589 is not set # CONFIG_PCMCIA_3C574 is not set @@ -808,29 +705,16 @@ CONFIG_PCMCIA_PCNET=y # CONFIG_PCMCIA_SMC91C92 is not set # CONFIG_PCMCIA_XIRC2PS is not set # CONFIG_PCMCIA_AXNET is not set - -# -# Wan interfaces -# # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set - -# -# Telephony Support -# # CONFIG_PHONE is not set # @@ -838,6 +722,7 @@ CONFIG_PCMCIA_PCNET=y # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces @@ -847,7 +732,6 @@ CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set @@ -857,6 +741,7 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set @@ -870,10 +755,13 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set # # Serial drivers @@ -892,22 +780,10 @@ CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set CONFIG_HW_RANDOM=y -# CONFIG_GEN_RTC is not set -# CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set -# CONFIG_DRM is not set # # PCMCIA character devices @@ -915,125 +791,104 @@ CONFIG_HW_RANDOM=y # CONFIG_SYNCLINK_CS is not set # CONFIG_CARDMAN_4000 is not set # CONFIG_CARDMAN_4040 is not set +# CONFIG_IPWIRELESS is not set # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# # CONFIG_TCG_TPM is not set - -# -# I2C support -# +CONFIG_DEVPORT=y # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# # CONFIG_W1 is not set - -# -# Hardware Monitoring support -# +# CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_I5K_AMB is not set # CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SIS5595 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_VT8231 is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set # -# Digital Video Broadcasting Devices +# Multimedia drivers # -# CONFIG_DVB is not set +# CONFIG_DAB is not set # # Graphics support # -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +# CONFIG_DRM is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set # CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # -# Console display driver support +# Display device support # -# CONFIG_MDA_CONSOLE is not set -CONFIG_DUMMY_CONSOLE=y +# CONFIG_DISPLAY_SUPPORT is not set # -# Sound +# Console display driver support # +CONFIG_DUMMY_CONSOLE=y # CONFIG_SOUND is not set - -# -# HID Devices -# +CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set - -# -# USB support -# +# CONFIG_HIDRAW is not set +CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # - -# -# USB Gadget Support -# # CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# # CONFIG_MMC is not set - -# -# LED devices -# +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set - -# -# LED drivers -# - -# -# LED Triggers -# - -# -# InfiniBand support -# +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set - -# -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# - -# -# Real Time Clock -# CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y @@ -1047,37 +902,29 @@ CONFIG_RTC_INTF_SYSFS=y CONFIG_RTC_INTF_PROC=y CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set - -# -# RTC drivers -# -# CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_DS1742 is not set -# CONFIG_RTC_DRV_M48T86 is not set -# CONFIG_RTC_DRV_SH is not set # CONFIG_RTC_DRV_TEST is not set -# CONFIG_RTC_DRV_V3020 is not set - -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# # -# DMA Devices +# SPI RTC drivers # # -# Auxiliary Display support +# Platform RTC drivers # +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_V3020 is not set # -# Virtualization +# on-CPU RTC drivers # +# CONFIG_RTC_DRV_SH is not set +# CONFIG_DMADEVICES is not set +# CONFIG_UIO is not set # # File systems @@ -1091,20 +938,16 @@ CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_SECURITY is not set # CONFIG_EXT4DEV_FS is not set CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -CONFIG_ROMFS_FS=y +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -1136,7 +979,6 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set # @@ -1151,14 +993,14 @@ CONFIG_RAMFS=y # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +CONFIG_ROMFS_FS=y # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y # CONFIG_NFS_FS is not set # CONFIG_NFSD is not set # CONFIG_SMB_FS is not set @@ -1166,17 +1008,12 @@ CONFIG_RAMFS=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=y @@ -1217,30 +1054,24 @@ CONFIG_NLS_CODEPAGE_437=y # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set - -# -# Distributed Lock Manager -# # CONFIG_DLM is not set # -# Profiling support -# -# CONFIG_PROFILING is not set - -# # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 # CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_SAMPLES is not set CONFIG_SH_STANDARD_BIOS=y # CONFIG_EARLY_SCIF_CONSOLE is not set # CONFIG_EARLY_PRINTK is not set @@ -1251,20 +1082,100 @@ CONFIG_SH_STANDARD_BIOS=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set # -# Cryptographic options +# Compression # -# CONFIG_CRYPTO is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_HIFN_795X is not set # # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +CONFIG_CRC_T10DIF=y +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/sh/configs/magicpanelr2_defconfig b/arch/sh/configs/magicpanelr2_defconfig index f8398a5f10ee..a3a80f3d27c0 100644 --- a/arch/sh/configs/magicpanelr2_defconfig +++ b/arch/sh/configs/magicpanelr2_defconfig @@ -1,9 +1,11 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.23-rc2 -# Fri Aug 17 12:15:16 2007 +# Linux kernel version: 2.6.26 +# Wed Jul 30 01:41:08 2008 # CONFIG_SUPERH=y +CONFIG_SUPERH32=y +CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_FIND_NEXT_BIT=y @@ -18,6 +20,7 @@ CONFIG_LOCKDEP_SUPPORT=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_ARCH_NO_VIRT_TO_BUS=y +CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -35,12 +38,16 @@ CONFIG_POSIX_MQUEUE=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_BSD_PROCESS_ACCT_V3=y # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set CONFIG_AUDIT=y +# CONFIG_AUDITSYSCALL is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=17 +# CONFIG_CGROUPS is not set +# CONFIG_GROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y CONFIG_RELAY=y +# CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set @@ -48,6 +55,7 @@ CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -55,6 +63,7 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y @@ -67,10 +76,24 @@ CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set +# CONFIG_HAVE_IOREMAP_PROT is not set +# CONFIG_HAVE_KPROBES is not set +# CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_ARCH_TRACEHOOK is not set +# CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +CONFIG_HAVE_CLK=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set CONFIG_MODVERSIONS=y @@ -81,6 +104,7 @@ CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -94,13 +118,17 @@ CONFIG_IOSCHED_NOOP=y # CONFIG_DEFAULT_CFQ is not set CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" +CONFIG_CLASSIC_RCU=y # # System type # CONFIG_CPU_SH3=y # CONFIG_CPU_SUBTYPE_SH7619 is not set +# CONFIG_CPU_SUBTYPE_SH7203 is not set # CONFIG_CPU_SUBTYPE_SH7206 is not set +# CONFIG_CPU_SUBTYPE_SH7263 is not set +# CONFIG_CPU_SUBTYPE_MXG is not set # CONFIG_CPU_SUBTYPE_SH7705 is not set # CONFIG_CPU_SUBTYPE_SH7706 is not set # CONFIG_CPU_SUBTYPE_SH7707 is not set @@ -109,6 +137,7 @@ CONFIG_CPU_SH3=y # CONFIG_CPU_SUBTYPE_SH7710 is not set # CONFIG_CPU_SUBTYPE_SH7712 is not set CONFIG_CPU_SUBTYPE_SH7720=y +# CONFIG_CPU_SUBTYPE_SH7721 is not set # CONFIG_CPU_SUBTYPE_SH7750 is not set # CONFIG_CPU_SUBTYPE_SH7091 is not set # CONFIG_CPU_SUBTYPE_SH7750R is not set @@ -117,14 +146,17 @@ CONFIG_CPU_SUBTYPE_SH7720=y # CONFIG_CPU_SUBTYPE_SH7751R is not set # CONFIG_CPU_SUBTYPE_SH7760 is not set # CONFIG_CPU_SUBTYPE_SH4_202 is not set -# CONFIG_CPU_SUBTYPE_ST40STB1 is not set -# CONFIG_CPU_SUBTYPE_ST40GX1 is not set +# CONFIG_CPU_SUBTYPE_SH7723 is not set +# CONFIG_CPU_SUBTYPE_SH7763 is not set # CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set # CONFIG_CPU_SUBTYPE_SH7785 is not set # CONFIG_CPU_SUBTYPE_SHX3 is not set # CONFIG_CPU_SUBTYPE_SH7343 is not set # CONFIG_CPU_SUBTYPE_SH7722 is not set +# CONFIG_CPU_SUBTYPE_SH7366 is not set +# CONFIG_CPU_SUBTYPE_SH5_101 is not set +# CONFIG_CPU_SUBTYPE_SH5_103 is not set # # Memory management options @@ -134,6 +166,7 @@ CONFIG_MMU=y CONFIG_PAGE_OFFSET=0x80000000 CONFIG_MEMORY_START=0x0C000000 CONFIG_MEMORY_SIZE=0x03F00000 +CONFIG_29BIT=y CONFIG_VSYSCALL=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_SPARSEMEM_ENABLE=y @@ -143,7 +176,9 @@ CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set +CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -151,6 +186,8 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPARSEMEM_STATIC=y +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 @@ -173,7 +210,6 @@ CONFIG_CPU_LITTLE_ENDIAN=y CONFIG_SH_DSP=y CONFIG_SH_ADC=y CONFIG_CPU_HAS_INTEVT=y -CONFIG_CPU_HAS_INTC_IRQ=y CONFIG_CPU_HAS_SR_RB=y CONFIG_CPU_HAS_DSP=y @@ -196,6 +232,7 @@ CONFIG_SH_PCLK_FREQ=24000000 # CONFIG_TICK_ONESHOT is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # # CPU Frequency scaling @@ -228,11 +265,14 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set +CONFIG_GUSA=y +# CONFIG_GUSA_RB is not set # # Boot options @@ -245,10 +285,6 @@ CONFIG_BOOT_LINK_OFFSET=0x00800000 # Bus options # # CONFIG_ARCH_SUPPORTS_MSI is not set - -# -# PCCARD (PCMCIA/CardBus) support -# # CONFIG_PCCARD is not set # @@ -289,6 +325,7 @@ CONFIG_IP_PNP_DHCP=y # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -296,8 +333,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -314,10 +349,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set # @@ -325,6 +356,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set @@ -346,9 +378,12 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_STANDALONE is not set # CONFIG_PREVENT_FIRMWARE_BUILD is not set CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set @@ -362,6 +397,7 @@ CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 # CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set # CONFIG_MTD_REDBOOT_PARTS_READONLY is not set CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -374,6 +410,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set # CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set # # RAM/ROM/Flash chip drivers @@ -408,7 +445,6 @@ CONFIG_MTD_PHYSMAP=y CONFIG_MTD_PHYSMAP_START=0x0000000 CONFIG_MTD_PHYSMAP_LEN=0 CONFIG_MTD_PHYSMAP_BANKWIDTH=0 -# CONFIG_MTD_SOLUTIONENGINE is not set # CONFIG_MTD_PLATRAM is not set # @@ -440,11 +476,14 @@ CONFIG_BLK_DEV=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=65536 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -457,18 +496,24 @@ CONFIG_MISC_DEVICES=y # CONFIG_ATA is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set +# CONFIG_VETH is not set # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y +# CONFIG_AX88796 is not set # CONFIG_STNIC is not set # CONFIG_SMC91X is not set CONFIG_SMC911X=y +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set @@ -477,10 +522,10 @@ CONFIG_SMC911X=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -502,7 +547,6 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set @@ -516,6 +560,7 @@ CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set # CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_SH_KEYSC is not set CONFIG_INPUT_MOUSE=y # CONFIG_MOUSE_PS2 is not set # CONFIG_MOUSE_SERIAL is not set @@ -539,9 +584,11 @@ CONFIG_SERIO_LIBPS2=y # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -569,60 +616,72 @@ CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set -# CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # # Graphics support # +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Display device support # # CONFIG_DISPLAY_SUPPORT is not set -# CONFIG_VGASTATE is not set -# CONFIG_VIDEO_OUTPUT_CONTROL is not set -# CONFIG_FB is not set # # Console display driver support # CONFIG_DUMMY_CONSOLE=y - -# -# Sound -# # CONFIG_SOUND is not set # CONFIG_HID_SUPPORT is not set # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y # CONFIG_RTC_HCTOSYS is not set @@ -644,9 +703,10 @@ CONFIG_RTC_INTF_DEV=y # # Platform RTC drivers # +# CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T59 is not set # CONFIG_RTC_DRV_V3020 is not set @@ -655,23 +715,7 @@ CONFIG_RTC_INTF_DEV=y # on-CPU RTC drivers # CONFIG_RTC_DRV_SH=y - -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# - -# -# Userspace I/O -# +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # @@ -684,18 +728,14 @@ CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set # CONFIG_EXT4DEV_FS is not set CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +# CONFIG_DNOTIFY is not set # CONFIG_INOTIFY is not set # CONFIG_QUOTA is not set -# CONFIG_DNOTIFY is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -724,7 +764,6 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set # @@ -744,30 +783,29 @@ CONFIG_JFFS2_FS_DEBUG=0 # CONFIG_JFFS2_FS_XATTR is not set # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -CONFIG_SUNRPC_BIND34=y # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -781,10 +819,6 @@ CONFIG_SUNRPC_BIND34=y # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# CONFIG_NLS=y CONFIG_NLS_DEFAULT="cp437" CONFIG_NLS_CODEPAGE_437=y @@ -825,23 +859,16 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set - -# -# Distributed Lock Manager -# # CONFIG_DLM is not set # -# Profiling support -# -# CONFIG_PROFILING is not set - -# # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -852,6 +879,7 @@ CONFIG_DEBUG_KERNEL=y # CONFIG_SCHED_DEBUG is not set # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set @@ -866,11 +894,16 @@ CONFIG_DEBUG_KOBJECT=y CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set CONFIG_FRAME_POINTER=y -# CONFIG_FORCED_INLINING is not set +# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_SAMPLES is not set # CONFIG_SH_STANDARD_BIOS is not set CONFIG_EARLY_SCIF_CONSOLE=y CONFIG_EARLY_SCIF_CONSOLE_PORT=0xa4430000 @@ -879,6 +912,7 @@ CONFIG_EARLY_PRINTK=y # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_4KSTACKS is not set +# CONFIG_IRQSTACKS is not set CONFIG_SH_KGDB=y # @@ -904,14 +938,17 @@ CONFIG_KGDB_DEFBITS_8=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_CRYPTO is not set # # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set CONFIG_CRC_CCITT=m CONFIG_CRC16=m +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set diff --git a/arch/sh/configs/microdev_defconfig b/arch/sh/configs/microdev_defconfig index e89d951c3c16..e4b900e72dcd 100644 --- a/arch/sh/configs/microdev_defconfig +++ b/arch/sh/configs/microdev_defconfig @@ -1,28 +1,35 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.18 -# Tue Oct 3 11:27:01 2006 +# Linux kernel version: 2.6.26 +# Wed Jul 30 01:47:16 2008 # CONFIG_SUPERH=y +CONFIG_SUPERH32=y +CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_BUG=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_NO_VIRT_TO_BUS=y +CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y @@ -31,10 +38,16 @@ CONFIG_SWAP=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +# CONFIG_GROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y @@ -47,29 +60,42 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y +CONFIG_ANON_INODES=y CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set +# CONFIG_HAVE_IOREMAP_PROT is not set +# CONFIG_HAVE_KPROBES is not set +# CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_ARCH_TRACEHOOK is not set +# CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +CONFIG_HAVE_CLK=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# # CONFIG_MODULES is not set - -# -# Block layer -# CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -83,59 +109,26 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y # # System type # -# CONFIG_SH_SOLUTION_ENGINE is not set -# CONFIG_SH_7751_SOLUTION_ENGINE is not set -# CONFIG_SH_7300_SOLUTION_ENGINE is not set -# CONFIG_SH_7343_SOLUTION_ENGINE is not set -# CONFIG_SH_73180_SOLUTION_ENGINE is not set -# CONFIG_SH_7751_SYSTEMH is not set -# CONFIG_SH_HP6XX is not set -# CONFIG_SH_EC3104 is not set -# CONFIG_SH_SATURN is not set -# CONFIG_SH_DREAMCAST is not set -# CONFIG_SH_BIGSUR is not set -# CONFIG_SH_MPC1211 is not set -# CONFIG_SH_SH03 is not set -# CONFIG_SH_SECUREEDGE5410 is not set -# CONFIG_SH_HS7751RVOIP is not set -# CONFIG_SH_7710VOIPGW is not set -# CONFIG_SH_RTS7751R2D is not set -# CONFIG_SH_R7780RP is not set -# CONFIG_SH_EDOSK7705 is not set -CONFIG_SH_SH4202_MICRODEV=y -# CONFIG_SH_LANDISK is not set -# CONFIG_SH_TITAN is not set -# CONFIG_SH_SHMIN is not set -# CONFIG_SH_UNKNOWN is not set - -# -# Processor selection -# CONFIG_CPU_SH4=y - -# -# SH-2 Processor Support -# -# CONFIG_CPU_SUBTYPE_SH7604 is not set - -# -# SH-3 Processor Support -# -# CONFIG_CPU_SUBTYPE_SH7300 is not set +# CONFIG_CPU_SUBTYPE_SH7619 is not set +# CONFIG_CPU_SUBTYPE_SH7203 is not set +# CONFIG_CPU_SUBTYPE_SH7206 is not set +# CONFIG_CPU_SUBTYPE_SH7263 is not set +# CONFIG_CPU_SUBTYPE_MXG is not set # CONFIG_CPU_SUBTYPE_SH7705 is not set # CONFIG_CPU_SUBTYPE_SH7706 is not set # CONFIG_CPU_SUBTYPE_SH7707 is not set # CONFIG_CPU_SUBTYPE_SH7708 is not set # CONFIG_CPU_SUBTYPE_SH7709 is not set # CONFIG_CPU_SUBTYPE_SH7710 is not set - -# -# SH-4 Processor Support -# +# CONFIG_CPU_SUBTYPE_SH7712 is not set +# CONFIG_CPU_SUBTYPE_SH7720 is not set +# CONFIG_CPU_SUBTYPE_SH7721 is not set # CONFIG_CPU_SUBTYPE_SH7750 is not set # CONFIG_CPU_SUBTYPE_SH7091 is not set # CONFIG_CPU_SUBTYPE_SH7750R is not set @@ -144,67 +137,94 @@ CONFIG_CPU_SH4=y # CONFIG_CPU_SUBTYPE_SH7751R is not set # CONFIG_CPU_SUBTYPE_SH7760 is not set CONFIG_CPU_SUBTYPE_SH4_202=y - -# -# ST40 Processor Support -# -# CONFIG_CPU_SUBTYPE_ST40STB1 is not set -# CONFIG_CPU_SUBTYPE_ST40GX1 is not set - -# -# SH-4A Processor Support -# +# CONFIG_CPU_SUBTYPE_SH7723 is not set +# CONFIG_CPU_SUBTYPE_SH7763 is not set # CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set - -# -# SH4AL-DSP Processor Support -# -# CONFIG_CPU_SUBTYPE_SH73180 is not set +# CONFIG_CPU_SUBTYPE_SH7785 is not set +# CONFIG_CPU_SUBTYPE_SHX3 is not set # CONFIG_CPU_SUBTYPE_SH7343 is not set +# CONFIG_CPU_SUBTYPE_SH7722 is not set +# CONFIG_CPU_SUBTYPE_SH7366 is not set +# CONFIG_CPU_SUBTYPE_SH5_101 is not set +# CONFIG_CPU_SUBTYPE_SH5_103 is not set # # Memory management options # +CONFIG_QUICKLIST=y CONFIG_MMU=y CONFIG_PAGE_OFFSET=0x80000000 CONFIG_MEMORY_START=0x08000000 CONFIG_MEMORY_SIZE=0x04000000 +CONFIG_29BIT=y CONFIG_VSYSCALL=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_DEFAULT=y +CONFIG_MAX_ACTIVE_REGIONS=1 +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_PAGE_SIZE_4KB=y +# CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_16KB is not set +# CONFIG_PAGE_SIZE_64KB is not set +CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_HUGETLB_PAGE_SIZE_64K=y +# CONFIG_HUGETLB_PAGE_SIZE_256K is not set # CONFIG_HUGETLB_PAGE_SIZE_1MB is not set +# CONFIG_HUGETLB_PAGE_SIZE_4MB is not set +# CONFIG_HUGETLB_PAGE_SIZE_64MB is not set +# CONFIG_HUGETLB_PAGE_SIZE_512MB is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPARSEMEM_STATIC=y +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_NR_QUICK=2 # # Cache configuration # # CONFIG_SH_DIRECT_MAPPED is not set -CONFIG_SH_WRITETHROUGH=y -# CONFIG_SH_OCRAM is not set +CONFIG_CACHE_WRITEBACK=y +# CONFIG_CACHE_WRITETHROUGH is not set +# CONFIG_CACHE_OFF is not set # # Processor features # CONFIG_CPU_LITTLE_ENDIAN=y +# CONFIG_CPU_BIG_ENDIAN is not set CONFIG_SH_FPU=y -# CONFIG_SH_DSP is not set # CONFIG_SH_STORE_QUEUES is not set CONFIG_CPU_HAS_INTEVT=y CONFIG_CPU_HAS_SR_RB=y +CONFIG_CPU_HAS_PTEA=y +CONFIG_CPU_HAS_FPU=y # -# Timer support +# Board support +# +CONFIG_SH_SH4202_MICRODEV=y + +# +# Timer and clock configuration # CONFIG_SH_TMU=y +CONFIG_SH_TIMER_IRQ=16 CONFIG_SH_PCLK_FREQ=66000000 +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # # CPU Frequency scaling @@ -214,6 +234,7 @@ CONFIG_SH_PCLK_FREQ=66000000 # # DMA support # +CONFIG_SH_DMA_API=y CONFIG_SH_DMA=y CONFIG_NR_ONCHIP_DMA_CHANNELS=4 # CONFIG_NR_DMA_CHANNELS_BOOL is not set @@ -221,22 +242,30 @@ CONFIG_NR_ONCHIP_DMA_CHANNELS=4 # # Companion Chips # -# CONFIG_HD6446X_SERIES is not set + +# +# Additional SuperH Device Drivers +# CONFIG_HEARTBEAT=y +# CONFIG_PUSH_SWITCH is not set # # Kernel features # # CONFIG_HZ_100 is not set CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set # CONFIG_KEXEC is not set -# CONFIG_SMP is not set +# CONFIG_CRASH_DUMP is not set # CONFIG_PREEMPT_NONE is not set # CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y -CONFIG_PREEMPT_BKL=y +# CONFIG_PREEMPT_RCU is not set +CONFIG_GUSA=y +# CONFIG_GUSA_RB is not set # # Boot options @@ -251,30 +280,16 @@ CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/hda1" # Bus options # CONFIG_SUPERHYWAY=y -# CONFIG_PCI is not set - -# -# PCCARD (PCMCIA/CardBus) support -# +# CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_PCCARD is not set # -# PCI Hotplug Support -# - -# # Executable file formats # CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_FLAT is not set # CONFIG_BINFMT_MISC is not set # -# Power management options (EXPERIMENTAL) -# -# CONFIG_PM is not set - -# # Networking # CONFIG_NET=y @@ -282,12 +297,13 @@ CONFIG_NET=y # # Networking options # -# CONFIG_NETDEBUG is not set # CONFIG_PACKET is not set # CONFIG_UNIX is not set CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -308,30 +324,19 @@ CONFIG_IP_PNP=y # CONFIG_INET_TUNNEL is not set CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# # CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# # CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -344,10 +349,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set # @@ -355,9 +356,20 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -366,159 +378,96 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# # CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# # CONFIG_MTD is not set - -# -# Parallel port support -# # CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# +CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_NBD is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 -CONFIG_BLK_DEV_INITRD=y +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set - -# -# ATA/ATAPI/MFM/RLL support -# +# CONFIG_BLK_DEV_HD is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y CONFIG_IDE=y CONFIG_IDE_MAX_HWIFS=1 CONFIG_BLK_DEV_IDE=y # -# Please see Documentation/ide.txt for help/info on IDE drives +# Please see Documentation/ide/ide.txt for help/info on IDE drives # # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_BLK_DEV_IDEDISK=y # CONFIG_IDEDISK_MULTI_MODE is not set CONFIG_BLK_DEV_IDECD=y +CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y # CONFIG_BLK_DEV_IDETAPE is not set # CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_IDE_TASK_IOCTL is not set +CONFIG_IDE_PROC_FS=y # # IDE chipset support/bugfixes # -CONFIG_IDE_GENERIC=y -# CONFIG_IDE_ARM is not set +# CONFIG_BLK_DEV_PLATFORM is not set # CONFIG_BLK_DEV_IDEDMA is not set -# CONFIG_IDEDMA_AUTO is not set -# CONFIG_BLK_DEV_HD is not set # # SCSI device support # # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set # CONFIG_SCSI_NETLINK is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# # CONFIG_ATA is not set - -# -# Multi-device support (RAID and LVM) -# # CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# Network device support -# CONFIG_NETDEVICES=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set - -# -# PHY device support -# +# CONFIG_VETH is not set # CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# CONFIG_NET_ETHERNET=y CONFIG_MII=y +# CONFIG_AX88796 is not set # CONFIG_STNIC is not set CONFIG_SMC91X=y +# CONFIG_SMC911X is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set +CONFIG_NETDEV_1000=y +CONFIG_NETDEV_10000=y # -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices -# - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces +# Wireless LAN # +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set - -# -# Telephony Support -# # CONFIG_PHONE is not set # @@ -536,6 +485,7 @@ CONFIG_SMC91X=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -554,143 +504,93 @@ CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set CONFIG_HW_RANDOM=y -# CONFIG_GEN_RTC is not set -# CONFIG_DTLK is not set # CONFIG_R3964 is not set - -# -# Ftape, the floppy tape device driver -# # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# # CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set - -# -# I2C support -# # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# - -# -# Hardware Monitoring support -# +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_ABITUGURU is not set # CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set # -# Misc devices +# Sonics Silicon Backplane # +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set -CONFIG_VIDEO_V4L2=y +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set # -# Digital Video Broadcasting Devices +# Multimedia drivers # -# CONFIG_DVB is not set +# CONFIG_DAB is not set # # Graphics support # -CONFIG_FIRMWARE_EDID=y +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set # CONFIG_FB is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # -# Sound +# Display device support # +# CONFIG_DISPLAY_SUPPORT is not set # CONFIG_SOUND is not set - -# -# USB support -# -# CONFIG_USB_ARCH_HAS_HCD is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_USB_ARCH_HAS_OHCI is not set # CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # - -# -# USB Gadget Support -# # CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# # CONFIG_MMC is not set - -# -# LED devices -# +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set - -# -# LED drivers -# - -# -# LED Triggers -# - -# -# InfiniBand support -# - -# -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# - -# -# Real Time Clock -# +# CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set - -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# +# CONFIG_DMADEVICES is not set +# CONFIG_UIO is not set # # File systems @@ -702,20 +602,18 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -747,7 +645,6 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set # @@ -762,21 +659,20 @@ CONFIG_RAMFS=y # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y @@ -789,17 +685,12 @@ CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_CODEPAGE_437 is not set @@ -840,76 +731,127 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set - -# -# Profiling support -# -# CONFIG_PROFILING is not set +# CONFIG_DLM is not set # # Kernel hacking # +CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 # CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_UNWIND_INFO is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_SAMPLES is not set # CONFIG_SH_STANDARD_BIOS is not set # CONFIG_EARLY_SCIF_CONSOLE is not set -# CONFIG_KGDB is not set +# CONFIG_SH_KGDB is not set # # Security options # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y # -# Cryptographic options +# Crypto core or helper # -CONFIG_CRYPTO=y CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_MANAGER=y -# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=y +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -CONFIG_CRYPTO_ECB=y -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set # -# Hardware crypto devices +# Compression # +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_HW=y # # Library routines # +CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/sh/configs/migor_defconfig b/arch/sh/configs/migor_defconfig index 287408b2ace6..c4b3e1d8950d 100644 --- a/arch/sh/configs/migor_defconfig +++ b/arch/sh/configs/migor_defconfig @@ -1,10 +1,11 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc3 -# Thu May 22 14:30:07 2008 +# Linux kernel version: 2.6.26 +# Wed Jul 30 01:44:41 2008 # CONFIG_SUPERH=y CONFIG_SUPERH32=y +CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_FIND_NEXT_BIT=y @@ -77,9 +78,14 @@ CONFIG_PROFILING=y # CONFIG_MARKERS is not set CONFIG_OPROFILE=y CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set +# CONFIG_HAVE_IOREMAP_PROT is not set # CONFIG_HAVE_KPROBES is not set # CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_ARCH_TRACEHOOK is not set # CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +CONFIG_HAVE_CLK=y CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -90,12 +96,13 @@ CONFIG_MODULES=y # CONFIG_MODULE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set +CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -173,7 +180,9 @@ CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set +CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_SELECT_MEMORY_MODEL=y # CONFIG_FLATMEM_MANUAL is not set # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -216,6 +225,8 @@ CONFIG_CPU_HAS_DSP=y # # CONFIG_SH_7722_SOLUTION_ENGINE is not set CONFIG_SH_MIGOR=y +CONFIG_SH_MIGOR_QVGA=y +# CONFIG_SH_MIGOR_RTA_WVGA is not set # # Timer and clock configuration @@ -362,6 +373,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_CFG80211 is not set CONFIG_WIRELESS_EXT=y +CONFIG_WIRELESS_EXT_SYSFS=y # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set # CONFIG_RFKILL is not set @@ -378,6 +390,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=m +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set CONFIG_MTD=y @@ -475,6 +489,7 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set @@ -521,10 +536,10 @@ CONFIG_SCSI_WAIT_SCAN=m CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_DH is not set # CONFIG_ATA is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -537,6 +552,7 @@ CONFIG_MII=y # CONFIG_AX88796 is not set # CONFIG_STNIC is not set CONFIG_SMC91X=y +# CONFIG_SMC911X is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -602,6 +618,7 @@ CONFIG_KEYBOARD_SH_KEYSC=y # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_VT_HW_CONSOLE_BINDING=y @@ -636,21 +653,35 @@ CONFIG_I2C_BOARDINFO=y # # I2C Hardware Bus support # + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# # CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set +CONFIG_I2C_SH_MOBILE=y # CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_STUB is not set + +# +# Other I2C/SMBus bus drivers +# # CONFIG_I2C_PCA_PLATFORM is not set -CONFIG_I2C_SH_MOBILE=y +# CONFIG_I2C_STUB is not set # # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set +# CONFIG_AT24 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set @@ -663,6 +694,7 @@ CONFIG_I2C_SH_MOBILE=y # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set # @@ -674,6 +706,7 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set @@ -710,10 +743,6 @@ CONFIG_SSB_POSSIBLE=y # Console display driver support # CONFIG_DUMMY_CONSOLE=y - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y @@ -738,7 +767,7 @@ CONFIG_USB_GADGET_SELECTED=y # CONFIG_USB_GADGET_ATMEL_USBA is not set # CONFIG_USB_GADGET_FSL_USB2 is not set # CONFIG_USB_GADGET_NET2280 is not set -# CONFIG_USB_GADGET_PXA2XX is not set +# CONFIG_USB_GADGET_PXA25X is not set CONFIG_USB_GADGET_M66592=y CONFIG_USB_M66592=y CONFIG_SUPERH_BUILT_IN_M66592=y @@ -757,6 +786,7 @@ CONFIG_USB_GADGET_DUALSPEED=y CONFIG_USB_G_SERIAL=y # CONFIG_USB_MIDI_GADGET is not set # CONFIG_USB_G_PRINTER is not set +# CONFIG_USB_CDC_COMPOSITE is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -790,6 +820,7 @@ CONFIG_RTC_DRV_RS5C372=y # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set # # SPI RTC drivers @@ -810,6 +841,7 @@ CONFIG_RTC_DRV_RS5C372=y # on-CPU RTC drivers # CONFIG_RTC_DRV_SH=y +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # @@ -870,6 +902,7 @@ CONFIG_TMPFS=y # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -899,6 +932,7 @@ CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_SAMPLES is not set # CONFIG_SH_STANDARD_BIOS is not set CONFIG_EARLY_SCIF_CONSOLE=y @@ -955,6 +989,10 @@ CONFIG_CRYPTO=y # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set @@ -994,6 +1032,7 @@ CONFIG_BITREVERSE=y # CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +CONFIG_CRC_T10DIF=y # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set diff --git a/arch/sh/configs/r7780mp_defconfig b/arch/sh/configs/r7780mp_defconfig index 1a072615ffd4..57a300797584 100644 --- a/arch/sh/configs/r7780mp_defconfig +++ b/arch/sh/configs/r7780mp_defconfig @@ -1,10 +1,11 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc4 -# Thu Mar 6 15:39:59 2008 +# Linux kernel version: 2.6.26 +# Wed Jul 30 01:51:13 2008 # CONFIG_SUPERH=y CONFIG_SUPERH32=y +CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_FIND_NEXT_BIT=y @@ -84,13 +85,20 @@ CONFIG_PROFILING=y # CONFIG_MARKERS is not set CONFIG_OPROFILE=m CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set +# CONFIG_HAVE_IOREMAP_PROT is not set # CONFIG_HAVE_KPROBES is not set # CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_ARCH_TRACEHOOK is not set +# CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +CONFIG_HAVE_CLK=y CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set @@ -101,6 +109,7 @@ CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -115,7 +124,6 @@ CONFIG_IOSCHED_NOOP=y CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" CONFIG_CLASSIC_RCU=y -# CONFIG_PREEMPT_RCU is not set # # System type @@ -126,6 +134,7 @@ CONFIG_CPU_SH4A=y # CONFIG_CPU_SUBTYPE_SH7203 is not set # CONFIG_CPU_SUBTYPE_SH7206 is not set # CONFIG_CPU_SUBTYPE_SH7263 is not set +# CONFIG_CPU_SUBTYPE_MXG is not set # CONFIG_CPU_SUBTYPE_SH7705 is not set # CONFIG_CPU_SUBTYPE_SH7706 is not set # CONFIG_CPU_SUBTYPE_SH7707 is not set @@ -143,6 +152,7 @@ CONFIG_CPU_SH4A=y # CONFIG_CPU_SUBTYPE_SH7751R is not set # CONFIG_CPU_SUBTYPE_SH7760 is not set # CONFIG_CPU_SUBTYPE_SH4_202 is not set +# CONFIG_CPU_SUBTYPE_SH7723 is not set # CONFIG_CPU_SUBTYPE_SH7763 is not set # CONFIG_CPU_SUBTYPE_SH7770 is not set CONFIG_CPU_SUBTYPE_SH7780=y @@ -173,7 +183,9 @@ CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set +CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_HUGETLB_PAGE_SIZE_64K=y # CONFIG_HUGETLB_PAGE_SIZE_256K is not set # CONFIG_HUGETLB_PAGE_SIZE_1MB is not set @@ -188,6 +200,7 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPARSEMEM_STATIC=y # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 @@ -268,7 +281,7 @@ CONFIG_KEXEC=y # CONFIG_PREEMPT_NONE is not set # CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y -CONFIG_RCU_TRACE=y +# CONFIG_PREEMPT_RCU is not set CONFIG_GUSA=y # @@ -348,14 +361,13 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set +CONFIG_STP=m CONFIG_BRIDGE=m # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set @@ -384,6 +396,7 @@ CONFIG_LLC=m # # CONFIG_CFG80211 is not set CONFIG_WIRELESS_EXT=y +CONFIG_WIRELESS_EXT_SYSFS=y # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set # CONFIG_RFKILL is not set @@ -400,6 +413,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=m +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set @@ -420,12 +435,14 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set CONFIG_EEPROM_93CX6=y # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -499,9 +516,13 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_DH is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_SATA_PMP=y # CONFIG_SATA_AHCI is not set +# CONFIG_SATA_SIL24 is not set +CONFIG_ATA_SFF=y # CONFIG_SATA_SVW is not set # CONFIG_ATA_PIIX is not set # CONFIG_SATA_MV is not set @@ -511,7 +532,6 @@ CONFIG_ATA=y # CONFIG_SATA_PROMISE is not set # CONFIG_SATA_SX4 is not set CONFIG_SATA_SIL=y -# CONFIG_SATA_SIL24 is not set # CONFIG_SATA_SIS is not set # CONFIG_SATA_ULI is not set # CONFIG_SATA_VIA is not set @@ -556,17 +576,21 @@ CONFIG_SATA_SIL=y # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set CONFIG_PATA_PLATFORM=y +# CONFIG_PATA_SCH is not set # CONFIG_MD is not set # CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -585,6 +609,7 @@ CONFIG_AX88796_93CX6=y # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_SMC91X is not set +# CONFIG_SMC911X is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -593,7 +618,6 @@ CONFIG_AX88796_93CX6=y # CONFIG_IBM_NEW_EMAC_EMAC4 is not set CONFIG_NET_PCI=y CONFIG_PCNET32=m -# CONFIG_PCNET32_NAPI is not set # CONFIG_AMD8111_ETH is not set # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_B44 is not set @@ -616,32 +640,28 @@ CONFIG_8139TOO_8129=y # CONFIG_TLAN is not set CONFIG_VIA_RHINE=m CONFIG_VIA_RHINE_MMIO=y -# CONFIG_VIA_RHINE_NAPI is not set # CONFIG_SC92031 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set CONFIG_E1000=m -# CONFIG_E1000_NAPI is not set # CONFIG_E1000_DISABLE_PACKET_SPLIT is not set # CONFIG_E1000E is not set -# CONFIG_E1000E_ENABLED is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set CONFIG_R8169=y -# CONFIG_R8169_NAPI is not set # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set @@ -654,6 +674,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -661,6 +682,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -701,6 +723,7 @@ CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set # CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_SH_KEYSC is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set @@ -722,6 +745,7 @@ CONFIG_SERIO_LIBPS2=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -750,12 +774,7 @@ CONFIG_HW_RANDOM=y # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y @@ -776,6 +795,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set CONFIG_THERMAL=y +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set # @@ -787,13 +807,24 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # @@ -809,24 +840,9 @@ CONFIG_DAB=y # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# CONFIG_SOUND=m - -# -# Advanced Linux Sound Architecture -# # CONFIG_SND is not set - -# -# Open Sound System -# CONFIG_SOUND_PRIME=m -# CONFIG_SOUND_TRIDENT is not set -# CONFIG_SOUND_MSNDCLAS is not set -# CONFIG_SOUND_MSNDPIN is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set @@ -836,6 +852,8 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -844,6 +862,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y @@ -879,10 +898,7 @@ CONFIG_RTC_INTF_DEV=y # on-CPU RTC drivers # CONFIG_RTC_DRV_SH=y - -# -# Userspace I/O -# +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # @@ -903,7 +919,6 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -957,6 +972,7 @@ CONFIG_CONFIGFS_FS=m # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set CONFIG_MINIX_FS=y +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -967,20 +983,17 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y -# CONFIG_NFS_DIRECTIO is not set +CONFIG_ROOT_NFS=y CONFIG_NFSD=y CONFIG_NFSD_V3=y # CONFIG_NFSD_V3_ACL is not set CONFIG_NFSD_V4=y -CONFIG_NFSD_TCP=y -CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_BIND34 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1043,6 +1056,7 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y @@ -1050,9 +1064,12 @@ CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_PREEMPT is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -1066,6 +1083,8 @@ CONFIG_SCHED_DEBUG=y CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_FRAME_POINTER is not set @@ -1091,51 +1110,84 @@ CONFIG_DEBUG_STACKOVERFLOW=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y -# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=m +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# CONFIG_CRYPTO_HMAC=y # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set @@ -1144,8 +1196,10 @@ CONFIG_CRYPTO_HW=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +CONFIG_CRC_T10DIF=y # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set diff --git a/arch/sh/configs/r7785rp_defconfig b/arch/sh/configs/r7785rp_defconfig index 0dc1ce7b9349..1d09d24d4298 100644 --- a/arch/sh/configs/r7785rp_defconfig +++ b/arch/sh/configs/r7785rp_defconfig @@ -1,10 +1,11 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24-rc3 -# Fri Nov 23 14:03:57 2007 +# Linux kernel version: 2.6.26 +# Wed Jul 30 00:59:19 2008 # CONFIG_SUPERH=y CONFIG_SUPERH32=y +CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_FIND_NEXT_BIT=y @@ -21,6 +22,8 @@ CONFIG_LOCKDEP_SUPPORT=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_ARCH_NO_VIRT_TO_BUS=y +CONFIG_ARCH_SUPPORTS_AOUT=y +CONFIG_IO_TRAPPED=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -39,18 +42,16 @@ CONFIG_SYSVIPC_SYSCTL=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set -CONFIG_FAIR_GROUP_SCHED=y -CONFIG_FAIR_USER_SCHED=y -# CONFIG_FAIR_CGROUP_SCHED is not set -# CONFIG_SYSFS_DEPRECATED is not set +# CONFIG_GROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set # CONFIG_BLK_DEV_INITRD is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y @@ -64,20 +65,37 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y # CONFIG_FUTEX is not set CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +CONFIG_PROFILING=y +# CONFIG_MARKERS is not set +CONFIG_OPROFILE=m +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set +# CONFIG_HAVE_IOREMAP_PROT is not set +# CONFIG_HAVE_KPROBES is not set +# CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_ARCH_TRACEHOOK is not set +# CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +CONFIG_HAVE_CLK=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set @@ -88,6 +106,7 @@ CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -101,6 +120,7 @@ CONFIG_IOSCHED_NOOP=y # CONFIG_DEFAULT_CFQ is not set CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" +CONFIG_CLASSIC_RCU=y # # System type @@ -109,7 +129,10 @@ CONFIG_CPU_SH4=y CONFIG_CPU_SH4A=y CONFIG_CPU_SHX2=y # CONFIG_CPU_SUBTYPE_SH7619 is not set +# CONFIG_CPU_SUBTYPE_SH7203 is not set # CONFIG_CPU_SUBTYPE_SH7206 is not set +# CONFIG_CPU_SUBTYPE_SH7263 is not set +# CONFIG_CPU_SUBTYPE_MXG is not set # CONFIG_CPU_SUBTYPE_SH7705 is not set # CONFIG_CPU_SUBTYPE_SH7706 is not set # CONFIG_CPU_SUBTYPE_SH7707 is not set @@ -118,6 +141,7 @@ CONFIG_CPU_SHX2=y # CONFIG_CPU_SUBTYPE_SH7710 is not set # CONFIG_CPU_SUBTYPE_SH7712 is not set # CONFIG_CPU_SUBTYPE_SH7720 is not set +# CONFIG_CPU_SUBTYPE_SH7721 is not set # CONFIG_CPU_SUBTYPE_SH7750 is not set # CONFIG_CPU_SUBTYPE_SH7091 is not set # CONFIG_CPU_SUBTYPE_SH7750R is not set @@ -126,12 +150,15 @@ CONFIG_CPU_SHX2=y # CONFIG_CPU_SUBTYPE_SH7751R is not set # CONFIG_CPU_SUBTYPE_SH7760 is not set # CONFIG_CPU_SUBTYPE_SH4_202 is not set +# CONFIG_CPU_SUBTYPE_SH7723 is not set +# CONFIG_CPU_SUBTYPE_SH7763 is not set # CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set CONFIG_CPU_SUBTYPE_SH7785=y # CONFIG_CPU_SUBTYPE_SHX3 is not set # CONFIG_CPU_SUBTYPE_SH7343 is not set # CONFIG_CPU_SUBTYPE_SH7722 is not set +# CONFIG_CPU_SUBTYPE_SH7366 is not set # CONFIG_CPU_SUBTYPE_SH5_101 is not set # CONFIG_CPU_SUBTYPE_SH5_103 is not set @@ -157,7 +184,9 @@ CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set +CONFIG_ENTRY_OFFSET=0x00001000 # CONFIG_HUGETLB_PAGE_SIZE_64K is not set # CONFIG_HUGETLB_PAGE_SIZE_256K is not set CONFIG_HUGETLB_PAGE_SIZE_1MB=y @@ -173,6 +202,7 @@ CONFIG_HAVE_MEMORY_PRESENT=y CONFIG_SPARSEMEM_STATIC=y # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set # CONFIG_MEMORY_HOTPLUG is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 @@ -202,6 +232,7 @@ CONFIG_CPU_HAS_FPU=y # Board support # CONFIG_SH_HIGHLANDER=y +# CONFIG_SH_SH7785LCR is not set # CONFIG_SH_R7780RP is not set # CONFIG_SH_R7780MP is not set CONFIG_SH_R7785RP=y @@ -245,12 +276,13 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set CONFIG_KEXEC=y # CONFIG_CRASH_DUMP is not set # CONFIG_PREEMPT_NONE is not set # CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y -CONFIG_PREEMPT_BKL=y +# CONFIG_PREEMPT_RCU is not set CONFIG_GUSA=y # @@ -295,6 +327,7 @@ CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -329,14 +362,13 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set +CONFIG_STP=m CONFIG_BRIDGE=m # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set @@ -355,6 +387,7 @@ CONFIG_LLC=m # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set @@ -364,6 +397,7 @@ CONFIG_LLC=m # # CONFIG_CFG80211 is not set CONFIG_WIRELESS_EXT=y +CONFIG_WIRELESS_EXT_SYSFS=y # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set # CONFIG_RFKILL is not set @@ -380,6 +414,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=m +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set @@ -397,14 +433,18 @@ CONFIG_BLK_DEV=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set CONFIG_EEPROM_93CX6=y # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -464,6 +504,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set @@ -476,9 +517,13 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_DH is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_SATA_PMP=y # CONFIG_SATA_AHCI is not set +# CONFIG_SATA_SIL24 is not set +CONFIG_ATA_SFF=y # CONFIG_SATA_SVW is not set # CONFIG_ATA_PIIX is not set # CONFIG_SATA_MV is not set @@ -488,7 +533,6 @@ CONFIG_ATA=y # CONFIG_SATA_PROMISE is not set # CONFIG_SATA_SX4 is not set CONFIG_SATA_SIL=y -# CONFIG_SATA_SIL24 is not set # CONFIG_SATA_SIS is not set # CONFIG_SATA_ULI is not set # CONFIG_SATA_VIA is not set @@ -517,6 +561,7 @@ CONFIG_SATA_SIL=y # CONFIG_PATA_MPIIX is not set # CONFIG_PATA_OLDPIIX is not set # CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NINJA32 is not set # CONFIG_PATA_NS87410 is not set # CONFIG_PATA_NS87415 is not set # CONFIG_PATA_OPTI is not set @@ -532,24 +577,27 @@ CONFIG_SATA_SIL=y # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set CONFIG_PATA_PLATFORM=y +# CONFIG_PATA_SCH is not set # CONFIG_MD is not set # CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_VETH is not set -# CONFIG_IP1000 is not set # CONFIG_ARCNET is not set # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y @@ -576,20 +624,21 @@ CONFIG_NETDEV_1000=y # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set CONFIG_R8169=y -# CONFIG_R8169_NAPI is not set # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set @@ -601,6 +650,8 @@ CONFIG_NETDEV_10000=y # CONFIG_NIU is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set +# CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -608,13 +659,13 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -649,6 +700,7 @@ CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set # CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_SH_KEYSC is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set @@ -670,7 +722,9 @@ CONFIG_SERIO_LIBPS2=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set # # Serial drivers @@ -697,12 +751,7 @@ CONFIG_HW_RANDOM=y # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y @@ -722,6 +771,8 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set # @@ -733,13 +784,24 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# # CONFIG_DAB is not set # @@ -751,15 +813,15 @@ CONFIG_SSB_POSSIBLE=y CONFIG_FB=y # CONFIG_FIRMWARE_EDID is not set # CONFIG_FB_DDC is not set -# CONFIG_FB_CFB_FILLRECT is not set -# CONFIG_FB_CFB_COPYAREA is not set -# CONFIG_FB_CFB_IMAGEBLIT is not set +CONFIG_FB_CFB_FILLRECT=m +CONFIG_FB_CFB_COPYAREA=m +CONFIG_FB_CFB_IMAGEBLIT=m # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set # CONFIG_FB_SYS_FILLRECT is not set # CONFIG_FB_SYS_COPYAREA is not set # CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set # CONFIG_FB_SYS_FOPS is not set -CONFIG_FB_DEFERRED_IO=y # CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set @@ -792,6 +854,8 @@ CONFIG_FB_DEFERRED_IO=y # CONFIG_FB_TRIDENT is not set # CONFIG_FB_ARK is not set # CONFIG_FB_PM3 is not set +# CONFIG_FB_CARMINE is not set +CONFIG_FB_SH_MOBILE_LCDC=m # CONFIG_FB_VIRTUAL is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set @@ -800,24 +864,9 @@ CONFIG_FB_DEFERRED_IO=y # # CONFIG_DISPLAY_SUPPORT is not set # CONFIG_LOGO is not set - -# -# Sound -# CONFIG_SOUND=m - -# -# Advanced Linux Sound Architecture -# # CONFIG_SND is not set - -# -# Open Sound System -# CONFIG_SOUND_PRIME=m -# CONFIG_SOUND_TRIDENT is not set -# CONFIG_SOUND_MSNDCLAS is not set -# CONFIG_SOUND_MSNDPIN is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set @@ -827,17 +876,17 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # - -# -# USB Gadget Support -# # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y @@ -861,9 +910,10 @@ CONFIG_RTC_INTF_DEV=y # # Platform RTC drivers # +# CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T59 is not set # CONFIG_RTC_DRV_V3020 is not set @@ -872,10 +922,7 @@ CONFIG_RTC_INTF_DEV=y # on-CPU RTC drivers # CONFIG_RTC_DRV_SH=y - -# -# Userspace I/O -# +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # @@ -896,14 +943,11 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -CONFIG_MINIX_FS=y -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set CONFIG_FUSE_FS=m @@ -951,8 +995,11 @@ CONFIG_CONFIGFS_FS=m # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +CONFIG_MINIX_FS=y +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y @@ -960,20 +1007,17 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y -# CONFIG_NFS_DIRECTIO is not set +CONFIG_ROOT_NFS=y CONFIG_NFSD=y CONFIG_NFSD_V3=y # CONFIG_NFSD_V3_ACL is not set CONFIG_NFSD_V4=y -CONFIG_NFSD_TCP=y -CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_BIND34 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1028,10 +1072,6 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set # CONFIG_DLM is not set -CONFIG_INSTRUMENTATION=y -CONFIG_PROFILING=y -CONFIG_OPROFILE=m -# CONFIG_MARKERS is not set # # Kernel hacking @@ -1040,6 +1080,7 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y @@ -1050,6 +1091,7 @@ CONFIG_DEBUG_KERNEL=y CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_PREEMPT is not set CONFIG_DEBUG_SPINLOCK=y @@ -1066,12 +1108,14 @@ CONFIG_STACKTRACE=y CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set CONFIG_FRAME_POINTER=y -CONFIG_FORCED_INLINING=y # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_SAMPLES is not set CONFIG_SH_STANDARD_BIOS=y @@ -1091,54 +1135,96 @@ CONFIG_4KSTACKS=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=m +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# CONFIG_CRYPTO_HMAC=y # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_SALSA20 is not set # CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_HIFN_795X is not set # # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +CONFIG_CRC_T10DIF=y # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set diff --git a/arch/sh/configs/rsk7203_defconfig b/arch/sh/configs/rsk7203_defconfig index a0ebd439cbd2..840fe3843ffa 100644 --- a/arch/sh/configs/rsk7203_defconfig +++ b/arch/sh/configs/rsk7203_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc4 -# Tue Jun 3 13:02:42 2008 +# Linux kernel version: 2.6.26 +# Mon Jul 28 22:23:03 2008 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -33,21 +33,22 @@ CONFIG_LOCALVERSION="" CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y -# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set -# CONFIG_IKCONFIG is not set +CONFIG_IKCONFIG=y +# CONFIG_IKCONFIG_PROC is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set -CONFIG_GROUP_SCHED=y -CONFIG_FAIR_GROUP_SCHED=y -# CONFIG_RT_GROUP_SCHED is not set -CONFIG_USER_SCHED=y -# CONFIG_CGROUP_SCHED is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_GROUP_SCHED is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set -# CONFIG_NAMESPACES is not set +CONFIG_NAMESPACES=y +CONFIG_UTS_NS=y +CONFIG_IPC_NS=y +CONFIG_USER_NS=y +CONFIG_PID_NS=y CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" CONFIG_CC_OPTIMIZE_FOR_SIZE=y @@ -72,26 +73,36 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_VM_EVENT_COUNTERS=y -CONFIG_SLAB=y +# CONFIG_SLAB is not set # CONFIG_SLUB is not set -# CONFIG_SLOB is not set +CONFIG_SLOB=y CONFIG_PROFILING=y # CONFIG_MARKERS is not set CONFIG_OPROFILE=y CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set +# CONFIG_HAVE_IOREMAP_PROT is not set # CONFIG_HAVE_KPROBES is not set # CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_ARCH_TRACEHOOK is not set # CONFIG_HAVE_DMA_ATTRS is not set -CONFIG_SLABINFO=y +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +CONFIG_HAVE_CLK=y CONFIG_RT_MUTEXES=y CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=0 -# CONFIG_MODULES is not set +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +# CONFIG_MODULE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -162,7 +173,9 @@ CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set +CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -196,6 +209,7 @@ CONFIG_CPU_HAS_FPU=y # # Board support # +CONFIG_SH_RSK7203=y # # Timer and clock configuration @@ -274,6 +288,7 @@ CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=serial ignore_loglevel" # # Executable file formats # +CONFIG_BINFMT_ELF_FDPIC=y CONFIG_BINFMT_FLAT=y CONFIG_BINFMT_ZFLAT=y CONFIG_BINFMT_SHARED_FLAT=y @@ -424,8 +439,8 @@ CONFIG_MTD_CFI_UTIL=y # # CONFIG_MTD_COMPLEX_MAPPINGS is not set CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PHYSMAP_START=0x20000000 -CONFIG_MTD_PHYSMAP_LEN=0x01000000 +CONFIG_MTD_PHYSMAP_START=0x0 +CONFIG_MTD_PHYSMAP_LEN=0x0 CONFIG_MTD_PHYSMAP_BANKWIDTH=4 # CONFIG_MTD_UCLINUX is not set # CONFIG_MTD_PLATRAM is not set @@ -456,9 +471,11 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set # CONFIG_BLK_DEV_RAM is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set @@ -475,7 +492,6 @@ CONFIG_HAVE_IDE=y # CONFIG_ATA is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -487,15 +503,15 @@ CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_AX88796 is not set # CONFIG_STNIC is not set -CONFIG_SMC91X=y +# CONFIG_SMC91X is not set +CONFIG_SMC911X=y # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set # CONFIG_B44 is not set -CONFIG_NETDEV_1000=y -# CONFIG_E1000E_ENABLED is not set -CONFIG_NETDEV_10000=y +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set # # Wireless LAN @@ -503,6 +519,15 @@ CONFIG_NETDEV_10000=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set # CONFIG_IWLWIFI_LEDS is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -587,6 +612,7 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set @@ -605,6 +631,7 @@ CONFIG_SSB_POSSIBLE=y # Multimedia drivers # CONFIG_DAB=y +# CONFIG_USB_DABUSB is not set # # Graphics support @@ -618,26 +645,96 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_USB_HIDINPUT_POWERBOOK is not set +# CONFIG_HID_FF is not set +# CONFIG_USB_HIDDEV is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_USB_ARCH_HAS_OHCI is not set # CONFIG_USB_ARCH_HAS_EHCI is not set -# CONFIG_USB is not set +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +CONFIG_USB_ANNOUNCE_NEW_DEVICES=y + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set # +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_SL811_HCD is not set +CONFIG_USB_R8A66597_HCD=y + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set + +# # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # + +# +# may also be needed; see USB_STORAGE Help for more information +# +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -677,6 +774,7 @@ CONFIG_RTC_INTF_DEV=y # on-CPU RTC drivers # CONFIG_RTC_DRV_SH=y +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # @@ -734,6 +832,7 @@ CONFIG_SYSFS=y # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set CONFIG_ROMFS_FS=y @@ -743,12 +842,11 @@ CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -775,16 +873,20 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set +CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_SHIRQ=y CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set -# CONFIG_DEBUG_OBJECTS is not set -# CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_OBJECTS=y +# CONFIG_DEBUG_OBJECTS_SELFTEST is not set +# CONFIG_DEBUG_OBJECTS_FREE is not set +# CONFIG_DEBUG_OBJECTS_TIMERS is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -797,12 +899,14 @@ CONFIG_DEBUG_SPINLOCK_SLEEP=y # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_INFO=y -# CONFIG_DEBUG_VM is not set -# CONFIG_DEBUG_WRITECOUNT is not set -# CONFIG_DEBUG_LIST is not set -# CONFIG_DEBUG_SG is not set +CONFIG_DEBUG_VM=y +CONFIG_DEBUG_WRITECOUNT=y +# CONFIG_DEBUG_MEMORY_INIT is not set +CONFIG_DEBUG_LIST=y +CONFIG_DEBUG_SG=y CONFIG_FRAME_POINTER=y # CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_SAMPLES is not set @@ -830,6 +934,7 @@ CONFIG_BITREVERSE=y # CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set diff --git a/arch/sh/configs/rts7751r2d1_defconfig b/arch/sh/configs/rts7751r2d1_defconfig index 3a915fd436d9..8413236c1b37 100644 --- a/arch/sh/configs/rts7751r2d1_defconfig +++ b/arch/sh/configs/rts7751r2d1_defconfig @@ -1,10 +1,11 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24 -# Thu Feb 7 16:25:55 2008 +# Linux kernel version: 2.6.26 +# Wed Jul 30 01:55:52 2008 # CONFIG_SUPERH=y CONFIG_SUPERH32=y +CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_FIND_NEXT_BIT=y @@ -20,6 +21,8 @@ CONFIG_LOCKDEP_SUPPORT=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_ARCH_NO_VIRT_TO_BUS=y +CONFIG_ARCH_SUPPORTS_AOUT=y +CONFIG_IO_TRAPPED=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -36,17 +39,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set -CONFIG_FAIR_GROUP_SCHED=y -CONFIG_FAIR_USER_SCHED=y -# CONFIG_FAIR_CGROUP_SCHED is not set +# CONFIG_GROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set # CONFIG_BLK_DEV_INITRD is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y @@ -76,22 +77,31 @@ CONFIG_PROFILING=y # CONFIG_MARKERS is not set CONFIG_OPROFILE=y CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set +# CONFIG_HAVE_IOREMAP_PROT is not set # CONFIG_HAVE_KPROBES is not set +# CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_ARCH_TRACEHOOK is not set +# CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +CONFIG_HAVE_CLK=y CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set # CONFIG_MODULE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set +CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -106,7 +116,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y -# CONFIG_PREEMPT_RCU is not set # # System type @@ -116,6 +125,7 @@ CONFIG_CPU_SH4=y # CONFIG_CPU_SUBTYPE_SH7203 is not set # CONFIG_CPU_SUBTYPE_SH7206 is not set # CONFIG_CPU_SUBTYPE_SH7263 is not set +# CONFIG_CPU_SUBTYPE_MXG is not set # CONFIG_CPU_SUBTYPE_SH7705 is not set # CONFIG_CPU_SUBTYPE_SH7706 is not set # CONFIG_CPU_SUBTYPE_SH7707 is not set @@ -133,6 +143,7 @@ CONFIG_CPU_SH4=y CONFIG_CPU_SUBTYPE_SH7751R=y # CONFIG_CPU_SUBTYPE_SH7760 is not set # CONFIG_CPU_SUBTYPE_SH4_202 is not set +# CONFIG_CPU_SUBTYPE_SH7723 is not set # CONFIG_CPU_SUBTYPE_SH7763 is not set # CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set @@ -140,6 +151,7 @@ CONFIG_CPU_SUBTYPE_SH7751R=y # CONFIG_CPU_SUBTYPE_SHX3 is not set # CONFIG_CPU_SUBTYPE_SH7343 is not set # CONFIG_CPU_SUBTYPE_SH7722 is not set +# CONFIG_CPU_SUBTYPE_SH7366 is not set # CONFIG_CPU_SUBTYPE_SH5_101 is not set # CONFIG_CPU_SUBTYPE_SH5_103 is not set @@ -161,7 +173,9 @@ CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set +CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -170,6 +184,7 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPARSEMEM_STATIC=y # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 @@ -256,7 +271,6 @@ CONFIG_HZ=250 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set -CONFIG_RCU_TRACE=y CONFIG_GUSA=y # CONFIG_GUSA_RB is not set @@ -332,8 +346,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -367,6 +379,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_CFG80211 is not set CONFIG_WIRELESS_EXT=y +CONFIG_WIRELESS_EXT_SYSFS=y # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set # CONFIG_RFKILL is not set @@ -383,6 +396,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=m +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set # CONFIG_MTD is not set @@ -399,14 +414,18 @@ CONFIG_BLK_DEV=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -466,6 +485,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set @@ -478,9 +498,13 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_DH is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_SATA_PMP=y # CONFIG_SATA_AHCI is not set +# CONFIG_SATA_SIL24 is not set +CONFIG_ATA_SFF=y # CONFIG_SATA_SVW is not set # CONFIG_ATA_PIIX is not set # CONFIG_SATA_MV is not set @@ -490,7 +514,6 @@ CONFIG_ATA=y # CONFIG_SATA_PROMISE is not set # CONFIG_SATA_SX4 is not set # CONFIG_SATA_SIL is not set -# CONFIG_SATA_SIL24 is not set # CONFIG_SATA_SIS is not set # CONFIG_SATA_ULI is not set # CONFIG_SATA_VIA is not set @@ -535,17 +558,21 @@ CONFIG_ATA=y # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set CONFIG_PATA_PLATFORM=y +# CONFIG_PATA_SCH is not set # CONFIG_MD is not set # CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -564,6 +591,7 @@ CONFIG_MII=y # CONFIG_NET_VENDOR_3COM is not set # CONFIG_SMC91X is not set # CONFIG_ENC28J60 is not set +# CONFIG_SMC911X is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -599,7 +627,6 @@ CONFIG_NETDEV_1000=y # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set -# CONFIG_E1000E_ENABLED is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set # CONFIG_NS83820 is not set @@ -609,12 +636,12 @@ CONFIG_NETDEV_1000=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set @@ -627,6 +654,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -634,6 +662,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # # USB Network Adapters @@ -690,9 +719,11 @@ CONFIG_INPUT=y # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -726,10 +757,6 @@ CONFIG_HW_RANDOM=y # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y # CONFIG_I2C is not set - -# -# SPI support -# CONFIG_SPI=y CONFIG_SPI_MASTER=y @@ -765,6 +792,8 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set # @@ -776,13 +805,24 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set CONFIG_MFD_SM501=y +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # CONFIG_USB_DABUSB is not set @@ -802,8 +842,8 @@ CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_SYS_FILLRECT is not set # CONFIG_FB_SYS_COPYAREA is not set # CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set # CONFIG_FB_SYS_FOPS is not set -CONFIG_FB_DEFERRED_IO=y # CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set @@ -836,6 +876,8 @@ CONFIG_FB_DEFERRED_IO=y # CONFIG_FB_TRIDENT is not set # CONFIG_FB_ARK is not set # CONFIG_FB_PM3 is not set +# CONFIG_FB_CARMINE is not set +CONFIG_FB_SH_MOBILE_LCDC=m CONFIG_FB_SM501=y # CONFIG_FB_VIRTUAL is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set @@ -862,15 +904,7 @@ CONFIG_LOGO=y # CONFIG_LOGO_SUPERH_MONO is not set # CONFIG_LOGO_SUPERH_VGA16 is not set CONFIG_LOGO_SUPERH_CLUT224=y - -# -# Sound -# CONFIG_SOUND=y - -# -# Advanced Linux Sound Architecture -# CONFIG_SND=m CONFIG_SND_TIMER=m CONFIG_SND_PCM=m @@ -884,21 +918,17 @@ CONFIG_SND_SUPPORT_OLD_API=y CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set - -# -# Generic devices -# +CONFIG_SND_VMASTER=y CONFIG_SND_MPU401_UART=m CONFIG_SND_OPL3_LIB=m CONFIG_SND_AC97_CODEC=m +CONFIG_SND_DRIVERS=y # CONFIG_SND_DUMMY is not set # CONFIG_SND_MTPAV is not set # CONFIG_SND_SERIAL_U16550 is not set # CONFIG_SND_MPU401 is not set - -# -# PCI devices -# +# CONFIG_SND_AC97_POWER_SAVE is not set +CONFIG_SND_PCI=y # CONFIG_SND_AD1889 is not set # CONFIG_SND_ALS300 is not set # CONFIG_SND_ALI5451 is not set @@ -907,6 +937,7 @@ CONFIG_SND_AC97_CODEC=m # CONFIG_SND_AU8810 is not set # CONFIG_SND_AU8820 is not set # CONFIG_SND_AU8830 is not set +# CONFIG_SND_AW2 is not set # CONFIG_SND_AZT3328 is not set # CONFIG_SND_BT87X is not set # CONFIG_SND_CA0106 is not set @@ -957,43 +988,13 @@ CONFIG_SND_AC97_CODEC=m # CONFIG_SND_VIRTUOSO is not set # CONFIG_SND_VX222 is not set CONFIG_SND_YMFPCI=m -CONFIG_SND_YMFPCI_FIRMWARE_IN_KERNEL=y -# CONFIG_SND_AC97_POWER_SAVE is not set - -# -# SPI devices -# - -# -# SUPERH devices -# - -# -# USB devices -# +CONFIG_SND_SPI=y +CONFIG_SND_SUPERH=y +CONFIG_SND_USB=y # CONFIG_SND_USB_AUDIO is not set # CONFIG_SND_USB_CAIAQ is not set - -# -# System on Chip audio support -# # CONFIG_SND_SOC is not set - -# -# SoC Audio support for SuperH -# - -# -# ALSA SoC audio for Freescale SOCs -# - -# -# Open Sound System -# CONFIG_SOUND_PRIME=m -# CONFIG_SOUND_TRIDENT is not set -# CONFIG_SOUND_MSNDCLAS is not set -# CONFIG_SOUND_MSNDPIN is not set CONFIG_AC97_BUS=m CONFIG_HID_SUPPORT=y CONFIG_HID=y @@ -1022,12 +1023,16 @@ CONFIG_USB_ANNOUNCE_NEW_DEVICES=y CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set # CONFIG_USB_EHCI_HCD is not set # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set @@ -1041,6 +1046,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1060,7 +1066,9 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set CONFIG_USB_LIBUSUAL=y # @@ -1096,9 +1104,12 @@ CONFIG_USB_LIBUSUAL=y # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y @@ -1118,6 +1129,8 @@ CONFIG_RTC_INTF_DEV=y # # SPI RTC drivers # +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set # CONFIG_RTC_DRV_MAX6902 is not set CONFIG_RTC_DRV_R9701=y # CONFIG_RTC_DRV_RS5C348 is not set @@ -1137,10 +1150,7 @@ CONFIG_RTC_DRV_R9701=y # on-CPU RTC drivers # # CONFIG_RTC_DRV_SH is not set - -# -# Userspace I/O -# +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # @@ -1155,14 +1165,11 @@ CONFIG_EXT2_FS=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -CONFIG_MINIX_FS=y -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -1208,8 +1215,11 @@ CONFIG_TMPFS=y # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +CONFIG_MINIX_FS=y +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y @@ -1275,12 +1285,14 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_SAMPLES is not set # CONFIG_SH_STANDARD_BIOS is not set CONFIG_EARLY_SCIF_CONSOLE=y @@ -1295,48 +1307,81 @@ CONFIG_EARLY_PRINTK=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y -# CONFIG_CRYPTO_SEQIV is not set + +# +# Crypto core or helper +# # CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_ECB is not set -# CONFIG_CRYPTO_CBC is not set -# CONFIG_CRYPTO_PCBC is not set -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -# CONFIG_CRYPTO_DES is not set -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set @@ -1345,8 +1390,10 @@ CONFIG_CRYPTO_HW=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +CONFIG_CRC_T10DIF=y # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set diff --git a/arch/sh/configs/rts7751r2dplus_defconfig b/arch/sh/configs/rts7751r2dplus_defconfig index 0a6d3b9e648b..7d9fa6e9ded5 100644 --- a/arch/sh/configs/rts7751r2dplus_defconfig +++ b/arch/sh/configs/rts7751r2dplus_defconfig @@ -1,10 +1,11 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24 -# Thu Feb 7 16:17:47 2008 +# Linux kernel version: 2.6.26 +# Wed Jul 30 01:59:18 2008 # CONFIG_SUPERH=y CONFIG_SUPERH32=y +CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_FIND_NEXT_BIT=y @@ -20,6 +21,8 @@ CONFIG_LOCKDEP_SUPPORT=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_ARCH_NO_VIRT_TO_BUS=y +CONFIG_ARCH_SUPPORTS_AOUT=y +CONFIG_IO_TRAPPED=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -36,17 +39,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set -CONFIG_FAIR_GROUP_SCHED=y -CONFIG_FAIR_USER_SCHED=y -# CONFIG_FAIR_CGROUP_SCHED is not set +# CONFIG_GROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set # CONFIG_BLK_DEV_INITRD is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y @@ -76,22 +77,31 @@ CONFIG_PROFILING=y # CONFIG_MARKERS is not set CONFIG_OPROFILE=y CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set +# CONFIG_HAVE_IOREMAP_PROT is not set # CONFIG_HAVE_KPROBES is not set +# CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_ARCH_TRACEHOOK is not set +# CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +CONFIG_HAVE_CLK=y CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set # CONFIG_MODULE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set +CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -106,7 +116,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y -# CONFIG_PREEMPT_RCU is not set # # System type @@ -116,6 +125,7 @@ CONFIG_CPU_SH4=y # CONFIG_CPU_SUBTYPE_SH7203 is not set # CONFIG_CPU_SUBTYPE_SH7206 is not set # CONFIG_CPU_SUBTYPE_SH7263 is not set +# CONFIG_CPU_SUBTYPE_MXG is not set # CONFIG_CPU_SUBTYPE_SH7705 is not set # CONFIG_CPU_SUBTYPE_SH7706 is not set # CONFIG_CPU_SUBTYPE_SH7707 is not set @@ -133,6 +143,7 @@ CONFIG_CPU_SH4=y CONFIG_CPU_SUBTYPE_SH7751R=y # CONFIG_CPU_SUBTYPE_SH7760 is not set # CONFIG_CPU_SUBTYPE_SH4_202 is not set +# CONFIG_CPU_SUBTYPE_SH7723 is not set # CONFIG_CPU_SUBTYPE_SH7763 is not set # CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set @@ -140,6 +151,7 @@ CONFIG_CPU_SUBTYPE_SH7751R=y # CONFIG_CPU_SUBTYPE_SHX3 is not set # CONFIG_CPU_SUBTYPE_SH7343 is not set # CONFIG_CPU_SUBTYPE_SH7722 is not set +# CONFIG_CPU_SUBTYPE_SH7366 is not set # CONFIG_CPU_SUBTYPE_SH5_101 is not set # CONFIG_CPU_SUBTYPE_SH5_103 is not set @@ -161,7 +173,9 @@ CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set +CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -170,6 +184,7 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPARSEMEM_STATIC=y # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 @@ -256,7 +271,6 @@ CONFIG_HZ=250 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set -CONFIG_RCU_TRACE=y CONFIG_GUSA=y # CONFIG_GUSA_RB is not set @@ -332,8 +346,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -367,6 +379,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_CFG80211 is not set CONFIG_WIRELESS_EXT=y +CONFIG_WIRELESS_EXT_SYSFS=y # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set # CONFIG_RFKILL is not set @@ -383,6 +396,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=m +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set # CONFIG_MTD is not set @@ -399,14 +414,18 @@ CONFIG_BLK_DEV=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -466,6 +485,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set @@ -478,9 +498,13 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_DH is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_SATA_PMP=y # CONFIG_SATA_AHCI is not set +# CONFIG_SATA_SIL24 is not set +CONFIG_ATA_SFF=y # CONFIG_SATA_SVW is not set # CONFIG_ATA_PIIX is not set # CONFIG_SATA_MV is not set @@ -490,7 +514,6 @@ CONFIG_ATA=y # CONFIG_SATA_PROMISE is not set # CONFIG_SATA_SX4 is not set # CONFIG_SATA_SIL is not set -# CONFIG_SATA_SIL24 is not set # CONFIG_SATA_SIS is not set # CONFIG_SATA_ULI is not set # CONFIG_SATA_VIA is not set @@ -535,17 +558,21 @@ CONFIG_ATA=y # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set CONFIG_PATA_PLATFORM=y +# CONFIG_PATA_SCH is not set # CONFIG_MD is not set # CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -564,6 +591,7 @@ CONFIG_MII=y # CONFIG_NET_VENDOR_3COM is not set # CONFIG_SMC91X is not set # CONFIG_ENC28J60 is not set +# CONFIG_SMC911X is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -599,7 +627,6 @@ CONFIG_NETDEV_1000=y # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set -# CONFIG_E1000E_ENABLED is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set # CONFIG_NS83820 is not set @@ -609,12 +636,12 @@ CONFIG_NETDEV_1000=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set @@ -627,6 +654,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -634,6 +662,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # # USB Network Adapters @@ -690,9 +719,11 @@ CONFIG_INPUT=y # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -726,10 +757,6 @@ CONFIG_HW_RANDOM=y # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y # CONFIG_I2C is not set - -# -# SPI support -# CONFIG_SPI=y CONFIG_SPI_MASTER=y @@ -765,6 +792,8 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set # @@ -776,13 +805,24 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set CONFIG_MFD_SM501=y +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # CONFIG_USB_DABUSB is not set @@ -802,8 +842,8 @@ CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_SYS_FILLRECT is not set # CONFIG_FB_SYS_COPYAREA is not set # CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set # CONFIG_FB_SYS_FOPS is not set -CONFIG_FB_DEFERRED_IO=y # CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set @@ -836,6 +876,8 @@ CONFIG_FB_DEFERRED_IO=y # CONFIG_FB_TRIDENT is not set # CONFIG_FB_ARK is not set # CONFIG_FB_PM3 is not set +# CONFIG_FB_CARMINE is not set +CONFIG_FB_SH_MOBILE_LCDC=m CONFIG_FB_SM501=y # CONFIG_FB_VIRTUAL is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set @@ -862,15 +904,7 @@ CONFIG_LOGO=y # CONFIG_LOGO_SUPERH_MONO is not set # CONFIG_LOGO_SUPERH_VGA16 is not set CONFIG_LOGO_SUPERH_CLUT224=y - -# -# Sound -# CONFIG_SOUND=y - -# -# Advanced Linux Sound Architecture -# CONFIG_SND=m CONFIG_SND_TIMER=m CONFIG_SND_PCM=m @@ -884,21 +918,17 @@ CONFIG_SND_SUPPORT_OLD_API=y CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set - -# -# Generic devices -# +CONFIG_SND_VMASTER=y CONFIG_SND_MPU401_UART=m CONFIG_SND_OPL3_LIB=m CONFIG_SND_AC97_CODEC=m +CONFIG_SND_DRIVERS=y # CONFIG_SND_DUMMY is not set # CONFIG_SND_MTPAV is not set # CONFIG_SND_SERIAL_U16550 is not set # CONFIG_SND_MPU401 is not set - -# -# PCI devices -# +# CONFIG_SND_AC97_POWER_SAVE is not set +CONFIG_SND_PCI=y # CONFIG_SND_AD1889 is not set # CONFIG_SND_ALS300 is not set # CONFIG_SND_ALI5451 is not set @@ -907,6 +937,7 @@ CONFIG_SND_AC97_CODEC=m # CONFIG_SND_AU8810 is not set # CONFIG_SND_AU8820 is not set # CONFIG_SND_AU8830 is not set +# CONFIG_SND_AW2 is not set # CONFIG_SND_AZT3328 is not set # CONFIG_SND_BT87X is not set # CONFIG_SND_CA0106 is not set @@ -957,43 +988,13 @@ CONFIG_SND_AC97_CODEC=m # CONFIG_SND_VIRTUOSO is not set # CONFIG_SND_VX222 is not set CONFIG_SND_YMFPCI=m -CONFIG_SND_YMFPCI_FIRMWARE_IN_KERNEL=y -# CONFIG_SND_AC97_POWER_SAVE is not set - -# -# SPI devices -# - -# -# SUPERH devices -# - -# -# USB devices -# +CONFIG_SND_SPI=y +CONFIG_SND_SUPERH=y +CONFIG_SND_USB=y # CONFIG_SND_USB_AUDIO is not set # CONFIG_SND_USB_CAIAQ is not set - -# -# System on Chip audio support -# # CONFIG_SND_SOC is not set - -# -# SoC Audio support for SuperH -# - -# -# ALSA SoC audio for Freescale SOCs -# - -# -# Open Sound System -# CONFIG_SOUND_PRIME=m -# CONFIG_SOUND_TRIDENT is not set -# CONFIG_SOUND_MSNDCLAS is not set -# CONFIG_SOUND_MSNDPIN is not set CONFIG_AC97_BUS=m CONFIG_HID_SUPPORT=y CONFIG_HID=y @@ -1022,12 +1023,16 @@ CONFIG_USB_ANNOUNCE_NEW_DEVICES=y CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set # CONFIG_USB_EHCI_HCD is not set # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set @@ -1041,6 +1046,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1060,7 +1066,9 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set CONFIG_USB_LIBUSUAL=y # @@ -1096,9 +1104,12 @@ CONFIG_USB_LIBUSUAL=y # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y @@ -1118,6 +1129,8 @@ CONFIG_RTC_INTF_DEV=y # # SPI RTC drivers # +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set # CONFIG_RTC_DRV_MAX6902 is not set CONFIG_RTC_DRV_R9701=y # CONFIG_RTC_DRV_RS5C348 is not set @@ -1137,10 +1150,7 @@ CONFIG_RTC_DRV_R9701=y # on-CPU RTC drivers # # CONFIG_RTC_DRV_SH is not set - -# -# Userspace I/O -# +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # @@ -1155,14 +1165,11 @@ CONFIG_EXT2_FS=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -CONFIG_MINIX_FS=y -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -1208,8 +1215,11 @@ CONFIG_TMPFS=y # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +CONFIG_MINIX_FS=y +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y @@ -1275,12 +1285,14 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_SAMPLES is not set # CONFIG_SH_STANDARD_BIOS is not set CONFIG_EARLY_SCIF_CONSOLE=y @@ -1295,48 +1307,81 @@ CONFIG_EARLY_PRINTK=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y -# CONFIG_CRYPTO_SEQIV is not set + +# +# Crypto core or helper +# # CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_ECB is not set -# CONFIG_CRYPTO_CBC is not set -# CONFIG_CRYPTO_PCBC is not set -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -# CONFIG_CRYPTO_DES is not set -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set @@ -1345,8 +1390,10 @@ CONFIG_CRYPTO_HW=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +CONFIG_CRC_T10DIF=y # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set diff --git a/arch/sh/configs/sdk7780_defconfig b/arch/sh/configs/sdk7780_defconfig index bb9bcd6591ab..6d834f242905 100644 --- a/arch/sh/configs/sdk7780_defconfig +++ b/arch/sh/configs/sdk7780_defconfig @@ -1,10 +1,11 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24-rc7 -# Tue Jan 22 11:34:03 2008 +# Linux kernel version: 2.6.26 +# Wed Jul 30 02:00:12 2008 # CONFIG_SUPERH=y CONFIG_SUPERH32=y +CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_FIND_NEXT_BIT=y @@ -20,6 +21,7 @@ CONFIG_LOCKDEP_SUPPORT=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_ARCH_NO_VIRT_TO_BUS=y +CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -38,24 +40,23 @@ CONFIG_POSIX_MQUEUE=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=18 # CONFIG_CGROUPS is not set -CONFIG_FAIR_GROUP_SCHED=y -CONFIG_FAIR_USER_SCHED=y -# CONFIG_FAIR_CGROUP_SCHED is not set +# CONFIG_GROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y CONFIG_RELAY=y +# CONFIG_NAMESPACES is not set # CONFIG_BLK_DEV_INITRD is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -63,11 +64,13 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y @@ -75,11 +78,24 @@ CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set +# CONFIG_HAVE_IOREMAP_PROT is not set +# CONFIG_HAVE_KPROBES is not set +# CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_ARCH_TRACEHOOK is not set +# CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +CONFIG_HAVE_CLK=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_MODVERSIONS is not set @@ -90,6 +106,7 @@ CONFIG_LBD=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -103,6 +120,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y # # System type @@ -113,6 +131,7 @@ CONFIG_CPU_SH4A=y # CONFIG_CPU_SUBTYPE_SH7203 is not set # CONFIG_CPU_SUBTYPE_SH7206 is not set # CONFIG_CPU_SUBTYPE_SH7263 is not set +# CONFIG_CPU_SUBTYPE_MXG is not set # CONFIG_CPU_SUBTYPE_SH7705 is not set # CONFIG_CPU_SUBTYPE_SH7706 is not set # CONFIG_CPU_SUBTYPE_SH7707 is not set @@ -130,6 +149,7 @@ CONFIG_CPU_SH4A=y # CONFIG_CPU_SUBTYPE_SH7751R is not set # CONFIG_CPU_SUBTYPE_SH7760 is not set # CONFIG_CPU_SUBTYPE_SH4_202 is not set +# CONFIG_CPU_SUBTYPE_SH7723 is not set # CONFIG_CPU_SUBTYPE_SH7763 is not set # CONFIG_CPU_SUBTYPE_SH7770 is not set CONFIG_CPU_SUBTYPE_SH7780=y @@ -137,6 +157,7 @@ CONFIG_CPU_SUBTYPE_SH7780=y # CONFIG_CPU_SUBTYPE_SHX3 is not set # CONFIG_CPU_SUBTYPE_SH7343 is not set # CONFIG_CPU_SUBTYPE_SH7722 is not set +# CONFIG_CPU_SUBTYPE_SH7366 is not set # CONFIG_CPU_SUBTYPE_SH5_101 is not set # CONFIG_CPU_SUBTYPE_SH5_103 is not set @@ -159,7 +180,9 @@ CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set +CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_HUGETLB_PAGE_SIZE_64K=y # CONFIG_HUGETLB_PAGE_SIZE_256K is not set # CONFIG_HUGETLB_PAGE_SIZE_1MB is not set @@ -174,6 +197,7 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPARSEMEM_STATIC=y # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_RESOURCES_64BIT=y CONFIG_ZONE_DMA_FLAG=0 @@ -205,7 +229,6 @@ CONFIG_CPU_HAS_FPU=y # CONFIG_SH_7780_SOLUTION_ENGINE is not set CONFIG_SH_SDK7780=y # CONFIG_SH_HIGHLANDER is not set -# CONFIG_SH_SDK7780_STANDALONE is not set CONFIG_SH_SDK7780_BASE=y # @@ -250,12 +273,13 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set # CONFIG_PREEMPT_NONE is not set # CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y -CONFIG_PREEMPT_BKL=y +# CONFIG_PREEMPT_RCU is not set CONFIG_GUSA=y # @@ -321,6 +345,7 @@ CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y @@ -370,8 +395,10 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=y # CONFIG_INET6_XFRM_MODE_BEET is not set # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set CONFIG_IPV6_SIT=y +CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_IPV6_TUNNEL is not set # CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_IPV6_MROUTE is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -397,7 +424,6 @@ CONFIG_NET_SCHED=y # CONFIG_NET_SCH_HTB is not set # CONFIG_NET_SCH_HFSC is not set # CONFIG_NET_SCH_PRIO is not set -# CONFIG_NET_SCH_RR is not set # CONFIG_NET_SCH_RED is not set # CONFIG_NET_SCH_SFQ is not set # CONFIG_NET_SCH_TEQL is not set @@ -405,7 +431,6 @@ CONFIG_NET_SCHED=y # CONFIG_NET_SCH_GRED is not set # CONFIG_NET_SCH_DSMARK is not set # CONFIG_NET_SCH_NETEM is not set -# CONFIG_NET_SCH_INGRESS is not set # # Classification @@ -417,9 +442,9 @@ CONFIG_NET_SCHED=y # CONFIG_NET_CLS_U32 is not set # CONFIG_NET_CLS_RSVP is not set # CONFIG_NET_CLS_RSVP6 is not set +# CONFIG_NET_CLS_FLOW is not set # CONFIG_NET_EMATCH is not set # CONFIG_NET_CLS_ACT is not set -# CONFIG_NET_CLS_POLICE is not set CONFIG_NET_SCH_FIFO=y # @@ -427,6 +452,7 @@ CONFIG_NET_SCH_FIFO=y # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set @@ -452,6 +478,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set @@ -475,16 +503,18 @@ CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set # CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y CONFIG_IDE=y CONFIG_IDE_MAX_HWIFS=4 CONFIG_BLK_DEV_IDE=y # -# Please see Documentation/ide.txt for help/info on IDE drives +# Please see Documentation/ide/ide.txt for help/info on IDE drives # # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_BLK_DEV_IDEDISK=y @@ -492,6 +522,7 @@ CONFIG_IDEDISK_MULTI_MODE=y # CONFIG_BLK_DEV_IDECS is not set # CONFIG_BLK_DEV_DELKIN is not set CONFIG_BLK_DEV_IDECD=y +CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y # CONFIG_BLK_DEV_IDETAPE is not set # CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_BLK_DEV_IDESCSI is not set @@ -501,14 +532,12 @@ CONFIG_IDE_PROC_FS=y # # IDE chipset support/bugfixes # -CONFIG_IDE_GENERIC=y CONFIG_BLK_DEV_PLATFORM=y # # PCI IDE chipsets support # CONFIG_BLK_DEV_IDEPCI=y -# CONFIG_IDEPCI_SHARE_IRQ is not set CONFIG_IDEPCI_PCIBUS_ORDER=y # CONFIG_BLK_DEV_OFFBOARD is not set CONFIG_BLK_DEV_GENERIC=y @@ -518,10 +547,8 @@ CONFIG_BLK_DEV_GENERIC=y # CONFIG_BLK_DEV_AMD74XX is not set # CONFIG_BLK_DEV_CMD64X is not set # CONFIG_BLK_DEV_TRIFLEX is not set -# CONFIG_BLK_DEV_CY82C693 is not set # CONFIG_BLK_DEV_CS5520 is not set # CONFIG_BLK_DEV_CS5530 is not set -# CONFIG_BLK_DEV_HPT34X is not set # CONFIG_BLK_DEV_HPT366 is not set # CONFIG_BLK_DEV_JMICRON is not set # CONFIG_BLK_DEV_SC1200 is not set @@ -537,10 +564,7 @@ CONFIG_BLK_DEV_GENERIC=y # CONFIG_BLK_DEV_TRM290 is not set # CONFIG_BLK_DEV_VIA82CXXX is not set # CONFIG_BLK_DEV_TC86C001 is not set -# CONFIG_IDE_ARM is not set # CONFIG_BLK_DEV_IDEDMA is not set -# CONFIG_IDE_ARCH_OBSOLETE_INIT is not set -# CONFIG_BLK_DEV_HD is not set # # SCSI device support @@ -600,6 +624,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set @@ -613,9 +638,13 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set +# CONFIG_SCSI_DH is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_SATA_PMP=y # CONFIG_SATA_AHCI is not set +# CONFIG_SATA_SIL24 is not set +CONFIG_ATA_SFF=y # CONFIG_SATA_SVW is not set # CONFIG_ATA_PIIX is not set # CONFIG_SATA_MV is not set @@ -625,7 +654,6 @@ CONFIG_ATA=y # CONFIG_SATA_PROMISE is not set # CONFIG_SATA_SX4 is not set # CONFIG_SATA_SIL is not set -# CONFIG_SATA_SIL24 is not set # CONFIG_SATA_SIS is not set # CONFIG_SATA_ULI is not set # CONFIG_SATA_VIA is not set @@ -654,6 +682,7 @@ CONFIG_ATA=y # CONFIG_PATA_MPIIX is not set # CONFIG_PATA_OLDPIIX is not set # CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NINJA32 is not set # CONFIG_PATA_NS87410 is not set # CONFIG_PATA_NS87415 is not set # CONFIG_PATA_OPTI is not set @@ -670,6 +699,7 @@ CONFIG_ATA=y # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set # CONFIG_PATA_PLATFORM is not set +# CONFIG_PATA_SCH is not set CONFIG_MD=y # CONFIG_BLK_DEV_MD is not set CONFIG_BLK_DEV_DM=y @@ -686,11 +716,14 @@ CONFIG_BLK_DEV_DM=y # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -708,6 +741,7 @@ CONFIG_MII=y # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set CONFIG_SMC91X=y +# CONFIG_SMC911X is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -726,6 +760,7 @@ CONFIG_SMC91X=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # # USB Network Adapters @@ -743,7 +778,6 @@ CONFIG_SMC91X=y # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set CONFIG_NETCONSOLE=y # CONFIG_NETCONSOLE_DYNAMIC is not set CONFIG_NETPOLL=y @@ -780,6 +814,7 @@ CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set # CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_SH_KEYSC is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y CONFIG_MOUSE_PS2_ALPS=y @@ -812,10 +847,13 @@ CONFIG_SERIO_LIBPS2=y # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set # # Serial drivers @@ -847,22 +885,20 @@ CONFIG_HW_RANDOM=y # CONFIG_SYNCLINK_CS is not set # CONFIG_CARDMAN_4000 is not set # CONFIG_CARDMAN_4040 is not set +# CONFIG_IPWIRELESS is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set CONFIG_POWER_SUPPLY=y # CONFIG_POWER_SUPPLY_DEBUG is not set # CONFIG_PDA_POWER is not set # CONFIG_BATTERY_DS2760 is not set # CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set # @@ -870,8 +906,10 @@ CONFIG_POWER_SUPPLY=y # CONFIG_SSB_POSSIBLE=y CONFIG_SSB=y +CONFIG_SSB_SPROM=y CONFIG_SSB_PCIHOST_POSSIBLE=y CONFIG_SSB_PCIHOST=y +# CONFIG_SSB_B43_PCI_BRIDGE is not set CONFIG_SSB_PCMCIAHOST_POSSIBLE=y # CONFIG_SSB_PCMCIAHOST is not set # CONFIG_SSB_SILENT is not set @@ -882,13 +920,24 @@ CONFIG_SSB_DRIVER_PCICORE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# # CONFIG_DAB is not set # @@ -900,15 +949,15 @@ CONFIG_SSB_DRIVER_PCICORE=y CONFIG_FB=y # CONFIG_FIRMWARE_EDID is not set # CONFIG_FB_DDC is not set -# CONFIG_FB_CFB_FILLRECT is not set -# CONFIG_FB_CFB_COPYAREA is not set -# CONFIG_FB_CFB_IMAGEBLIT is not set +CONFIG_FB_CFB_FILLRECT=m +CONFIG_FB_CFB_COPYAREA=m +CONFIG_FB_CFB_IMAGEBLIT=m # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set # CONFIG_FB_SYS_FILLRECT is not set # CONFIG_FB_SYS_COPYAREA is not set # CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set # CONFIG_FB_SYS_FOPS is not set -CONFIG_FB_DEFERRED_IO=y # CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set @@ -941,6 +990,8 @@ CONFIG_FB_DEFERRED_IO=y # CONFIG_FB_TRIDENT is not set # CONFIG_FB_ARK is not set # CONFIG_FB_PM3 is not set +# CONFIG_FB_CARMINE is not set +CONFIG_FB_SH_MOBILE_LCDC=m # CONFIG_FB_VIRTUAL is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set @@ -970,24 +1021,9 @@ CONFIG_LOGO_LINUX_CLUT224=y CONFIG_LOGO_SUPERH_MONO=y CONFIG_LOGO_SUPERH_VGA16=y CONFIG_LOGO_SUPERH_CLUT224=y - -# -# Sound -# CONFIG_SOUND=y - -# -# Advanced Linux Sound Architecture -# # CONFIG_SND is not set - -# -# Open Sound System -# CONFIG_SOUND_PRIME=y -# CONFIG_SOUND_TRIDENT is not set -# CONFIG_SOUND_MSNDCLAS is not set -# CONFIG_SOUND_MSNDPIN is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set @@ -1006,6 +1042,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y CONFIG_USB_DEBUG=y +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set # # Miscellaneous USB options @@ -1014,15 +1051,18 @@ CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set CONFIG_USB_EHCI_HCD=y -# CONFIG_USB_EHCI_SPLIT_ISO is not set # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set # CONFIG_USB_OHCI_HCD is not set # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set @@ -1033,6 +1073,7 @@ CONFIG_USB_EHCI_HCD=y # # CONFIG_USB_ACM is not set CONFIG_USB_PRINTER=y +# CONFIG_USB_WDM is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1054,6 +1095,7 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set # @@ -1067,10 +1109,6 @@ CONFIG_USB_MON=y # USB port drivers # # CONFIG_USB_USS720 is not set - -# -# USB Serial Converter support -# # CONFIG_USB_SERIAL is not set # @@ -1096,16 +1134,10 @@ CONFIG_USB_MON=y # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# +# CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y @@ -1117,13 +1149,11 @@ CONFIG_LEDS_CLASS=y # LED Triggers # # CONFIG_LEDS_TRIGGERS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -1145,14 +1175,11 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -CONFIG_MINIX_FS=y -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=y # CONFIG_FUSE_FS is not set @@ -1203,8 +1230,11 @@ CONFIG_HUGETLB_PAGE=y # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +CONFIG_MINIX_FS=y +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y @@ -1212,19 +1242,16 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set +CONFIG_ROOT_NFS=y CONFIG_NFSD=y CONFIG_NFSD_V3=y # CONFIG_NFSD_V3_ACL is not set # CONFIG_NFSD_V4 is not set -CONFIG_NFSD_TCP=y -CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1279,7 +1306,6 @@ CONFIG_NLS_ISO8859_15=y # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=y # CONFIG_DLM is not set -# CONFIG_INSTRUMENTATION is not set # # Kernel hacking @@ -1288,6 +1314,7 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y # CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y CONFIG_UNUSED_SYMBOLS=y # CONFIG_DEBUG_FS is not set @@ -1295,10 +1322,14 @@ CONFIG_UNUSED_SYMBOLS=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 # CONFIG_SCHED_DEBUG is not set # CONFIG_SCHEDSTATS is not set CONFIG_TIMER_STATS=y +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set CONFIG_DEBUG_PREEMPT=y # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set @@ -1313,12 +1344,14 @@ CONFIG_DEBUG_PREEMPT=y CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_FRAME_POINTER is not set -# CONFIG_FORCED_INLINING is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_SAMPLES is not set CONFIG_SH_STANDARD_BIOS=y @@ -1338,52 +1371,94 @@ CONFIG_DEBUG_STACKOVERFLOW=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y # CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_ECB is not set -# CONFIG_CRYPTO_CBC is not set -# CONFIG_CRYPTO_PCBC is not set -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_SALSA20 is not set # CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_HIFN_795X is not set # # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +CONFIG_CRC_T10DIF=y # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set diff --git a/arch/sh/configs/se7206_defconfig b/arch/sh/configs/se7206_defconfig index 6b34baa26eae..af15cbef12ba 100644 --- a/arch/sh/configs/se7206_defconfig +++ b/arch/sh/configs/se7206_defconfig @@ -1,10 +1,11 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc4 -# Tue Jun 3 20:27:08 2008 +# Linux kernel version: 2.6.26 +# Wed Jul 30 02:06:07 2008 # CONFIG_SUPERH=y CONFIG_SUPERH32=y +CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_FIND_NEXT_BIT=y @@ -87,9 +88,14 @@ CONFIG_PROFILING=y # CONFIG_MARKERS is not set CONFIG_OPROFILE=y CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set +# CONFIG_HAVE_IOREMAP_PROT is not set # CONFIG_HAVE_KPROBES is not set # CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_ARCH_TRACEHOOK is not set # CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +CONFIG_HAVE_CLK=y CONFIG_RT_MUTEXES=y CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=0 @@ -99,12 +105,13 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set +CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -175,7 +182,9 @@ CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set +CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -294,6 +303,7 @@ CONFIG_CF_BASE_ADDR=0xb8000000 # # Executable file formats # +CONFIG_BINFMT_ELF_FDPIC=y CONFIG_BINFMT_FLAT=y CONFIG_BINFMT_ZFLAT=y CONFIG_BINFMT_SHARED_FLAT=y @@ -487,6 +497,7 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y CONFIG_EEPROM_93CX6=y # CONFIG_ENCLOSURE_SERVICES is not set @@ -503,7 +514,6 @@ CONFIG_HAVE_IDE=y # CONFIG_ATA is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -516,6 +526,7 @@ CONFIG_MII=y # CONFIG_AX88796 is not set # CONFIG_STNIC is not set CONFIG_SMC91X=y +# CONFIG_SMC911X is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -583,6 +594,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set # @@ -594,6 +606,7 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set @@ -625,10 +638,6 @@ CONFIG_SSB_POSSIBLE=y # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set @@ -669,6 +678,7 @@ CONFIG_RTC_INTF_DEV=y # on-CPU RTC drivers # CONFIG_RTC_DRV_SH=y +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # @@ -728,6 +738,7 @@ CONFIG_CONFIGFS_FS=y CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set CONFIG_ROMFS_FS=y @@ -738,13 +749,12 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -776,6 +786,8 @@ CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -795,6 +807,7 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set CONFIG_DEBUG_VM=y # CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set CONFIG_DEBUG_LIST=y # CONFIG_DEBUG_SG is not set CONFIG_FRAME_POINTER=y @@ -860,6 +873,10 @@ CONFIG_CRYPTO_ALGAPI=y # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set @@ -899,6 +916,7 @@ CONFIG_BITREVERSE=y # CONFIG_GENERIC_FIND_FIRST_BIT is not set CONFIG_CRC_CCITT=y CONFIG_CRC16=y +# CONFIG_CRC_T10DIF is not set CONFIG_CRC_ITU_T=y CONFIG_CRC32=y CONFIG_CRC7=y diff --git a/arch/sh/configs/se7343_defconfig b/arch/sh/configs/se7343_defconfig index 84c0075e2ad4..4e30b70377e2 100644 --- a/arch/sh/configs/se7343_defconfig +++ b/arch/sh/configs/se7343_defconfig @@ -1,40 +1,56 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.18 -# Tue Oct 3 11:46:17 2006 +# Linux kernel version: 2.6.26 +# Wed Jul 30 02:08:38 2008 # CONFIG_SUPERH=y +CONFIG_SUPERH32=y +CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_BUG=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_NO_VIRT_TO_BUS=y +CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y # CONFIG_SWAP is not set CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set -CONFIG_INITRAMFS_SOURCE="" +# CONFIG_NAMESPACES is not set +# CONFIG_BLK_DEV_INITRD is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y CONFIG_EMBEDDED=y @@ -46,33 +62,47 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y # CONFIG_FUTEX is not set +CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y # CONFIG_SHMEM is not set -CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set +# CONFIG_HAVE_IOREMAP_PROT is not set +# CONFIG_HAVE_KPROBES is not set +# CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_ARCH_TRACEHOOK is not set +# CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +CONFIG_HAVE_CLK=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set - -# -# Block layer -# +CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -86,62 +116,28 @@ CONFIG_DEFAULT_DEADLINE=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="deadline" +CONFIG_CLASSIC_RCU=y # # System type # -CONFIG_SOLUTION_ENGINE=y -# CONFIG_SH_SOLUTION_ENGINE is not set -# CONFIG_SH_7751_SOLUTION_ENGINE is not set -# CONFIG_SH_7300_SOLUTION_ENGINE is not set -CONFIG_SH_7343_SOLUTION_ENGINE=y -# CONFIG_SH_73180_SOLUTION_ENGINE is not set -# CONFIG_SH_7751_SYSTEMH is not set -# CONFIG_SH_HP6XX is not set -# CONFIG_SH_EC3104 is not set -# CONFIG_SH_SATURN is not set -# CONFIG_SH_DREAMCAST is not set -# CONFIG_SH_BIGSUR is not set -# CONFIG_SH_MPC1211 is not set -# CONFIG_SH_SH03 is not set -# CONFIG_SH_SECUREEDGE5410 is not set -# CONFIG_SH_HS7751RVOIP is not set -# CONFIG_SH_7710VOIPGW is not set -# CONFIG_SH_RTS7751R2D is not set -# CONFIG_SH_R7780RP is not set -# CONFIG_SH_EDOSK7705 is not set -# CONFIG_SH_SH4202_MICRODEV is not set -# CONFIG_SH_LANDISK is not set -# CONFIG_SH_TITAN is not set -# CONFIG_SH_SHMIN is not set -# CONFIG_SH_UNKNOWN is not set - -# -# Processor selection -# CONFIG_CPU_SH4=y CONFIG_CPU_SH4A=y CONFIG_CPU_SH4AL_DSP=y - -# -# SH-2 Processor Support -# -# CONFIG_CPU_SUBTYPE_SH7604 is not set - -# -# SH-3 Processor Support -# -# CONFIG_CPU_SUBTYPE_SH7300 is not set +# CONFIG_CPU_SUBTYPE_SH7619 is not set +# CONFIG_CPU_SUBTYPE_SH7203 is not set +# CONFIG_CPU_SUBTYPE_SH7206 is not set +# CONFIG_CPU_SUBTYPE_SH7263 is not set +# CONFIG_CPU_SUBTYPE_MXG is not set # CONFIG_CPU_SUBTYPE_SH7705 is not set # CONFIG_CPU_SUBTYPE_SH7706 is not set # CONFIG_CPU_SUBTYPE_SH7707 is not set # CONFIG_CPU_SUBTYPE_SH7708 is not set # CONFIG_CPU_SUBTYPE_SH7709 is not set # CONFIG_CPU_SUBTYPE_SH7710 is not set - -# -# SH-4 Processor Support -# +# CONFIG_CPU_SUBTYPE_SH7712 is not set +# CONFIG_CPU_SUBTYPE_SH7720 is not set +# CONFIG_CPU_SUBTYPE_SH7721 is not set # CONFIG_CPU_SUBTYPE_SH7750 is not set # CONFIG_CPU_SUBTYPE_SH7091 is not set # CONFIG_CPU_SUBTYPE_SH7750R is not set @@ -150,67 +146,89 @@ CONFIG_CPU_SH4AL_DSP=y # CONFIG_CPU_SUBTYPE_SH7751R is not set # CONFIG_CPU_SUBTYPE_SH7760 is not set # CONFIG_CPU_SUBTYPE_SH4_202 is not set - -# -# ST40 Processor Support -# -# CONFIG_CPU_SUBTYPE_ST40STB1 is not set -# CONFIG_CPU_SUBTYPE_ST40GX1 is not set - -# -# SH-4A Processor Support -# +# CONFIG_CPU_SUBTYPE_SH7723 is not set +# CONFIG_CPU_SUBTYPE_SH7763 is not set # CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set - -# -# SH4AL-DSP Processor Support -# -# CONFIG_CPU_SUBTYPE_SH73180 is not set +# CONFIG_CPU_SUBTYPE_SH7785 is not set +# CONFIG_CPU_SUBTYPE_SHX3 is not set CONFIG_CPU_SUBTYPE_SH7343=y +# CONFIG_CPU_SUBTYPE_SH7722 is not set +# CONFIG_CPU_SUBTYPE_SH7366 is not set +# CONFIG_CPU_SUBTYPE_SH5_101 is not set +# CONFIG_CPU_SUBTYPE_SH5_103 is not set # # Memory management options # +CONFIG_QUICKLIST=y CONFIG_MMU=y CONFIG_PAGE_OFFSET=0x80000000 CONFIG_MEMORY_START=0x0c000000 CONFIG_MEMORY_SIZE=0x01000000 -CONFIG_32BIT=y +CONFIG_29BIT=y CONFIG_VSYSCALL=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_DEFAULT=y +CONFIG_MAX_ACTIVE_REGIONS=1 +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_PAGE_SIZE_4KB=y +# CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_16KB is not set +# CONFIG_PAGE_SIZE_64KB is not set +CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPARSEMEM_STATIC=y +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_NR_QUICK=2 # # Cache configuration # # CONFIG_SH_DIRECT_MAPPED is not set -# CONFIG_SH_WRITETHROUGH is not set -# CONFIG_SH_OCRAM is not set +CONFIG_CACHE_WRITEBACK=y +# CONFIG_CACHE_WRITETHROUGH is not set +# CONFIG_CACHE_OFF is not set # # Processor features # CONFIG_CPU_LITTLE_ENDIAN=y -# CONFIG_SH_FPU is not set +# CONFIG_CPU_BIG_ENDIAN is not set # CONFIG_SH_FPU_EMU is not set CONFIG_SH_DSP=y # CONFIG_SH_STORE_QUEUES is not set CONFIG_CPU_HAS_INTEVT=y CONFIG_CPU_HAS_SR_RB=y +CONFIG_CPU_HAS_DSP=y + +# +# Board support +# +CONFIG_SOLUTION_ENGINE=y +CONFIG_SH_7343_SOLUTION_ENGINE=y # -# Timer support +# Timer and clock configuration # CONFIG_SH_TMU=y +CONFIG_SH_TIMER_IRQ=16 CONFIG_SH_PCLK_FREQ=27000000 +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # # CPU Frequency scaling @@ -225,57 +243,50 @@ CONFIG_SH_PCLK_FREQ=27000000 # # Companion Chips # -# CONFIG_HD6446X_SERIES is not set + +# +# Additional SuperH Device Drivers +# CONFIG_HEARTBEAT=y +# CONFIG_PUSH_SWITCH is not set # # Kernel features # # CONFIG_HZ_100 is not set CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set # CONFIG_KEXEC is not set -# CONFIG_SMP is not set +# CONFIG_CRASH_DUMP is not set CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set +CONFIG_GUSA=y # # Boot options # CONFIG_ZERO_PAGE_OFFSET=0x00001000 CONFIG_BOOT_LINK_OFFSET=0x00800000 -# CONFIG_UBC_WAKEUP is not set # CONFIG_CMDLINE_BOOL is not set # # Bus options # -# CONFIG_PCI is not set - -# -# PCCARD (PCMCIA/CardBus) support -# +# CONFIG_CF_ENABLER is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_PCCARD is not set # -# PCI Hotplug Support -# - -# # Executable file formats # CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_FLAT is not set # CONFIG_BINFMT_MISC is not set # -# Power management options (EXPERIMENTAL) -# -# CONFIG_PM is not set - -# # Networking # CONFIG_NET=y @@ -283,22 +294,20 @@ CONFIG_NET=y # # Networking options # -# CONFIG_NETDEBUG is not set CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set # CONFIG_IP_ADVANCED_ROUTER is not set CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set +# CONFIG_IP_PNP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_ARPD is not set @@ -310,29 +319,18 @@ CONFIG_SYN_COOKIES=y # CONFIG_INET_TUNNEL is not set CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set # CONFIG_INET_DIAG is not set # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# # CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# # CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -345,10 +343,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set # @@ -356,9 +350,20 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -367,36 +372,34 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# # CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set CONFIG_MTD_CONCAT=y CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers # CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set # CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set # # RAM/ROM/Flash chip drivers @@ -422,13 +425,15 @@ CONFIG_MTD_CFI_UTIL=y CONFIG_MTD_RAM=y # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_OBSOLETE_CHIPS is not set # # Mapping drivers for chip access # # CONFIG_MTD_COMPLEX_MAPPINGS is not set -# CONFIG_MTD_PHYSMAP is not set +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0x0 +CONFIG_MTD_PHYSMAP_LEN=0 +CONFIG_MTD_PHYSMAP_BANKWIDTH=0 # CONFIG_MTD_PLATRAM is not set # @@ -445,130 +450,102 @@ CONFIG_MTD_RAM=y # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# # CONFIG_MTD_NAND is not set - -# -# OneNAND Flash Device Drivers -# # CONFIG_MTD_ONENAND is not set # -# Parallel port support +# UBI - Unsorted block images # +# CONFIG_MTD_UBI is not set # CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# +CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_RAM is not set -# CONFIG_BLK_DEV_INITRD is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set - -# -# ATA/ATAPI/MFM/RLL support -# +# CONFIG_BLK_DEV_HD is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # # SCSI device support # # CONFIG_RAID_ATTRS is not set -# CONFIG_SCSI is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set # CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y # -# Serial ATA (prod) and Parallel ATA (experimental) drivers +# SCSI support type (disk, tape, CD-ROM) # -# CONFIG_ATA is not set +# CONFIG_BLK_DEV_SD is not set +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set # -# Multi-device support (RAID and LVM) +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs # -# CONFIG_MD is not set +CONFIG_SCSI_MULTI_LUN=y +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m # -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# Network device support +# SCSI Transports # +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +# CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_SCSI_DH is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set CONFIG_NETDEVICES=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set - -# -# PHY device support -# +# CONFIG_VETH is not set # CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# CONFIG_NET_ETHERNET=y CONFIG_MII=y +# CONFIG_AX88796 is not set # CONFIG_STNIC is not set CONFIG_SMC91X=y +# CONFIG_SMC911X is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set +CONFIG_NETDEV_1000=y +CONFIG_NETDEV_10000=y # -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices -# - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces +# Wireless LAN # +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set - -# -# Telephony Support -# # CONFIG_PHONE is not set # @@ -576,13 +553,13 @@ CONFIG_SMC91X=y # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces # # CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set @@ -592,6 +569,7 @@ CONFIG_INPUT=y # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set @@ -605,9 +583,11 @@ CONFIG_INPUT=y # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -626,156 +606,106 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_UNIX98_PTYS is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set CONFIG_HW_RANDOM=y -# CONFIG_GEN_RTC is not set -# CONFIG_DTLK is not set # CONFIG_R3964 is not set - -# -# Ftape, the floppy tape device driver -# # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# # CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set - -# -# I2C support -# -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y - -# -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# -# I2C Hardware Bus support -# -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_PCA_ISA is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set -# CONFIG_SENSORS_EEPROM is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_MAX6875 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# +# CONFIG_I2C is not set # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set # -# Dallas's 1-wire bus +# Sonics Silicon Backplane # +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # -# Hardware Monitoring support +# Multifunction device drivers # -# CONFIG_HWMON is not set -# CONFIG_HWMON_VID is not set +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # -# Misc devices +# Multimedia devices # # -# Multimedia devices +# Multimedia core support # CONFIG_VIDEO_DEV=y -CONFIG_VIDEO_V4L1=y +CONFIG_VIDEO_V4L2_COMMON=y +CONFIG_VIDEO_ALLOW_V4L1=y CONFIG_VIDEO_V4L1_COMPAT=y -CONFIG_VIDEO_V4L2=y +# CONFIG_DVB_CORE is not set +CONFIG_VIDEO_MEDIA=y # -# Video Capture Adapters -# - -# -# Video Capture Adapters +# Multimedia drivers # +# CONFIG_MEDIA_ATTACH is not set +CONFIG_VIDEO_V4L2=y +CONFIG_VIDEO_V4L1=y +CONFIG_VIDEO_CAPTURE_DRIVERS=y # CONFIG_VIDEO_ADV_DEBUG is not set CONFIG_VIDEO_HELPER_CHIPS_AUTO=y # CONFIG_VIDEO_VIVI is not set # CONFIG_VIDEO_CPIA is not set -# CONFIG_VIDEO_SAA5246A is not set -# CONFIG_VIDEO_SAA5249 is not set -# CONFIG_TUNER_3036 is not set - -# -# Radio Adapters -# - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set +# CONFIG_SOC_CAMERA is not set +# CONFIG_VIDEO_SH_MOBILE_CEU is not set +CONFIG_RADIO_ADAPTERS=y +# CONFIG_DAB is not set # # Graphics support # -CONFIG_FIRMWARE_EDID=y +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set CONFIG_FB=y -# CONFIG_FB_CFB_FILLRECT is not set -# CONFIG_FB_CFB_COPYAREA is not set -# CONFIG_FB_CFB_IMAGEBLIT is not set +CONFIG_FIRMWARE_EDID=y +# CONFIG_FB_DDC is not set +CONFIG_FB_CFB_FILLRECT=m +CONFIG_FB_CFB_COPYAREA=m +CONFIG_FB_CFB_IMAGEBLIT=m +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set # CONFIG_FB_MODE_HELPERS is not set # CONFIG_FB_TILEBLITTING is not set -# CONFIG_FB_EPSON1355 is not set -# CONFIG_FB_S1D13XXX is not set -# CONFIG_FB_VIRTUAL is not set # -# Console display driver support +# Frame buffer hardware drivers # -CONFIG_DUMMY_CONSOLE=y -# CONFIG_FRAMEBUFFER_CONSOLE is not set - -# -# Logo configuration -# -# CONFIG_LOGO is not set +# CONFIG_FB_S1D13XXX is not set +CONFIG_FB_SH_MOBILE_LCDC=m +# CONFIG_FB_VIRTUAL is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # -# Sound +# Display device support # -CONFIG_SOUND=y +# CONFIG_DISPLAY_SUPPORT is not set # -# Advanced Linux Sound Architecture +# Console display driver support # +CONFIG_DUMMY_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE is not set +# CONFIG_LOGO is not set +CONFIG_SOUND=y CONFIG_SND=y CONFIG_SND_TIMER=y CONFIG_SND_PCM=y @@ -791,96 +721,49 @@ CONFIG_SND_SUPPORT_OLD_API=y CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set - -# -# Generic devices -# +CONFIG_SND_DRIVERS=y # CONFIG_SND_DUMMY is not set # CONFIG_SND_VIRMIDI is not set # CONFIG_SND_MTPAV is not set # CONFIG_SND_SERIAL_U16550 is not set # CONFIG_SND_MPU401 is not set - -# -# Open Sound System -# +CONFIG_SND_SUPERH=y +# CONFIG_SND_SOC is not set # CONFIG_SOUND_PRIME is not set - -# -# USB support -# -# CONFIG_USB_ARCH_HAS_HCD is not set -# CONFIG_USB_ARCH_HAS_OHCI is not set -# CONFIG_USB_ARCH_HAS_EHCI is not set - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set +# CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set - -# -# LED devices -# +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set - -# -# LED drivers -# - -# -# LED Triggers -# - -# -# InfiniBand support -# - -# -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# - -# -# Real Time Clock -# +# CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set - -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# +# CONFIG_DMADEVICES is not set +# CONFIG_UIO is not set # # File systems # -# CONFIG_EXT2_FS is not set -# CONFIG_EXT3_FS is not set +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +# CONFIG_DNOTIFY is not set # CONFIG_INOTIFY is not set # CONFIG_QUOTA is not set -# CONFIG_DNOTIFY is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -909,7 +792,6 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set # @@ -922,35 +804,34 @@ CONFIG_RAMFS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set -# CONFIG_JFFS_FS is not set CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set # CONFIG_JFFS2_SUMMARY is not set # CONFIG_JFFS2_FS_XATTR is not set # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set -# CONFIG_CRAMFS is not set +CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set CONFIG_NFSD=y # CONFIG_NFSD_V3 is not set -# CONFIG_NFSD_TCP is not set -CONFIG_ROOT_NFS=y +# CONFIG_NFSD_V4 is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y @@ -963,56 +844,136 @@ CONFIG_SUNRPC=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# # CONFIG_NLS is not set - -# -# Profiling support -# -# CONFIG_PROFILING is not set +# CONFIG_DLM is not set # # Kernel hacking # +CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 # CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_DEBUG_FS is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_SAMPLES is not set # CONFIG_SH_STANDARD_BIOS is not set -# CONFIG_EARLY_SCIF_CONSOLE is not set -# CONFIG_KGDB is not set +CONFIG_EARLY_SCIF_CONSOLE=y +CONFIG_EARLY_SCIF_CONSOLE_PORT=0xffe00000 +CONFIG_EARLY_PRINTK=y +# CONFIG_SH_KGDB is not set # # Security options # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set # -# Cryptographic options +# Compression # -# CONFIG_CRYPTO is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_HW=y # # Library routines # +CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/sh/configs/se7619_defconfig b/arch/sh/configs/se7619_defconfig index 3a3c3c1f507d..80c1c72edb56 100644 --- a/arch/sh/configs/se7619_defconfig +++ b/arch/sh/configs/se7619_defconfig @@ -1,9 +1,11 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.22-rc4 -# Fri Jun 15 19:43:06 2007 +# Linux kernel version: 2.6.26 +# Wed Jul 30 02:12:32 2008 # CONFIG_SUPERH=y +CONFIG_SUPERH32=y +CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_FIND_NEXT_BIT=y @@ -17,27 +19,26 @@ CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_NO_VIRT_TO_BUS=y +CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" # CONFIG_LOCALVERSION_AUTO is not set # CONFIG_SYSVIPC is not set # CONFIG_BSD_PROCESS_ACCT is not set -# CONFIG_UTS_NS is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -CONFIG_SYSFS_DEPRECATED=y +# CONFIG_CGROUPS is not set +# CONFIG_GROUP_SCHED is not set # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set # CONFIG_BLK_DEV_INITRD is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y @@ -49,6 +50,7 @@ CONFIG_EMBEDDED=y CONFIG_PRINTK=y CONFIG_BUG=y # CONFIG_ELF_CORE is not set +CONFIG_COMPAT_BRK=y # CONFIG_BASE_FULL is not set # CONFIG_FUTEX is not set CONFIG_ANON_INODES=y @@ -60,20 +62,26 @@ CONFIG_EVENTFD=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set +# CONFIG_HAVE_IOREMAP_PROT is not set +# CONFIG_HAVE_KPROBES is not set +# CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_ARCH_TRACEHOOK is not set +# CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +CONFIG_HAVE_CLK=y +CONFIG_SLABINFO=y CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=1 - -# -# Loadable module support -# # CONFIG_MODULES is not set - -# -# Block layer -# CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -87,14 +95,17 @@ CONFIG_IOSCHED_NOOP=y # CONFIG_DEFAULT_CFQ is not set CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" +CONFIG_CLASSIC_RCU=y # # System type # CONFIG_CPU_SH2=y CONFIG_CPU_SUBTYPE_SH7619=y +# CONFIG_CPU_SUBTYPE_SH7203 is not set # CONFIG_CPU_SUBTYPE_SH7206 is not set -# CONFIG_CPU_SUBTYPE_SH7300 is not set +# CONFIG_CPU_SUBTYPE_SH7263 is not set +# CONFIG_CPU_SUBTYPE_MXG is not set # CONFIG_CPU_SUBTYPE_SH7705 is not set # CONFIG_CPU_SUBTYPE_SH7706 is not set # CONFIG_CPU_SUBTYPE_SH7707 is not set @@ -102,6 +113,8 @@ CONFIG_CPU_SUBTYPE_SH7619=y # CONFIG_CPU_SUBTYPE_SH7709 is not set # CONFIG_CPU_SUBTYPE_SH7710 is not set # CONFIG_CPU_SUBTYPE_SH7712 is not set +# CONFIG_CPU_SUBTYPE_SH7720 is not set +# CONFIG_CPU_SUBTYPE_SH7721 is not set # CONFIG_CPU_SUBTYPE_SH7750 is not set # CONFIG_CPU_SUBTYPE_SH7091 is not set # CONFIG_CPU_SUBTYPE_SH7750R is not set @@ -110,14 +123,17 @@ CONFIG_CPU_SUBTYPE_SH7619=y # CONFIG_CPU_SUBTYPE_SH7751R is not set # CONFIG_CPU_SUBTYPE_SH7760 is not set # CONFIG_CPU_SUBTYPE_SH4_202 is not set -# CONFIG_CPU_SUBTYPE_ST40STB1 is not set -# CONFIG_CPU_SUBTYPE_ST40GX1 is not set +# CONFIG_CPU_SUBTYPE_SH7723 is not set +# CONFIG_CPU_SUBTYPE_SH7763 is not set # CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set # CONFIG_CPU_SUBTYPE_SH7785 is not set -# CONFIG_CPU_SUBTYPE_SH73180 is not set +# CONFIG_CPU_SUBTYPE_SHX3 is not set # CONFIG_CPU_SUBTYPE_SH7343 is not set # CONFIG_CPU_SUBTYPE_SH7722 is not set +# CONFIG_CPU_SUBTYPE_SH7366 is not set +# CONFIG_CPU_SUBTYPE_SH5_101 is not set +# CONFIG_CPU_SUBTYPE_SH5_103 is not set # # Memory management options @@ -126,6 +142,7 @@ CONFIG_QUICKLIST=y CONFIG_PAGE_OFFSET=0x00000000 CONFIG_MEMORY_START=0x0c000000 CONFIG_MEMORY_SIZE=0x04000000 +CONFIG_29BIT=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_ARCH_SPARSEMEM_DEFAULT=y @@ -134,7 +151,9 @@ CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set +CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -142,6 +161,8 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPARSEMEM_STATIC=y +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 @@ -151,7 +172,9 @@ CONFIG_NR_QUICK=2 # Cache configuration # # CONFIG_SH_DIRECT_MAPPED is not set -CONFIG_SH_WRITETHROUGH=y +# CONFIG_CACHE_WRITEBACK is not set +CONFIG_CACHE_WRITETHROUGH=y +# CONFIG_CACHE_OFF is not set # # Processor features @@ -159,8 +182,6 @@ CONFIG_SH_WRITETHROUGH=y # CONFIG_CPU_LITTLE_ENDIAN is not set CONFIG_CPU_BIG_ENDIAN=y # CONFIG_SH_FPU_EMU is not set -# CONFIG_SH_DSP is not set -CONFIG_CPU_HAS_IPR_IRQ=y # # Board support @@ -185,7 +206,6 @@ CONFIG_SH_CLK_MD=5 # # DMA support # -# CONFIG_SH_DMA is not set # # Companion Chips @@ -205,11 +225,13 @@ CONFIG_HZ_100=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=100 +# CONFIG_SCHED_HRTICK is not set # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set +CONFIG_GUSA=y # # Boot options @@ -221,15 +243,13 @@ CONFIG_BOOT_LINK_OFFSET=0x00800000 # # Bus options # +# CONFIG_CF_ENABLER is not set # CONFIG_ARCH_SUPPORTS_MSI is not set # -# PCCARD (PCMCIA/CardBus) support -# - -# # Executable file formats # +CONFIG_BINFMT_ELF_FDPIC=y CONFIG_BINFMT_FLAT=y CONFIG_BINFMT_ZFLAT=y # CONFIG_BINFMT_SHARED_FLAT is not set @@ -250,10 +270,6 @@ CONFIG_BINFMT_ZFLAT=y # CONFIG_STANDALONE is not set # CONFIG_PREVENT_FIRMWARE_BUILD is not set # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set CONFIG_MTD_CONCAT=y @@ -263,6 +279,7 @@ CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 # CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set # CONFIG_MTD_REDBOOT_PARTS_READONLY is not set # CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -275,6 +292,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set # CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set # # RAM/ROM/Flash chip drivers @@ -334,29 +352,17 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2 # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set - -# -# Parallel port support -# # CONFIG_PARPORT is not set - -# -# Plug and Play support -# -# CONFIG_PNPACPI is not set - -# -# Block devices -# +CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_RAM is not set # CONFIG_CDROM_PKTCDVD is not set - -# -# Misc devices -# -# CONFIG_BLINK is not set +# CONFIG_BLK_DEV_HD is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -364,21 +370,10 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2 # # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set # CONFIG_SCSI_NETLINK is not set # CONFIG_ATA is not set - -# -# Multi-device support (RAID and LVM) -# # CONFIG_MD is not set - -# -# ISDN subsystem -# - -# -# Telephony Support -# # CONFIG_PHONE is not set # @@ -386,13 +381,13 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2 # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces # # CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set @@ -416,6 +411,7 @@ CONFIG_INPUT=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -433,123 +429,84 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_UNIX98_PTYS is not set # CONFIG_LEGACY_PTYS is not set - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set -# CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# # CONFIG_TCG_TPM is not set # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set # -# Dallas's 1-wire bus +# Sonics Silicon Backplane # -# CONFIG_W1 is not set -# CONFIG_HWMON is not set +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set -CONFIG_DAB=y +# CONFIG_VIDEO_MEDIA is not set # -# Graphics support +# Multimedia drivers # -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +CONFIG_DAB=y # -# Display device support +# Graphics support # -# CONFIG_DISPLAY_SUPPORT is not set # CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set # CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # -# Sound +# Display device support # +# CONFIG_DISPLAY_SUPPORT is not set # CONFIG_SOUND is not set - -# -# HID Devices -# +CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set - -# -# USB support -# -# CONFIG_USB_ARCH_HAS_HCD is not set +# CONFIG_HIDRAW is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_USB_ARCH_HAS_OHCI is not set # CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # - -# -# USB Gadget Support -# # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set - -# -# LED devices -# +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set - -# -# LED drivers -# - -# -# LED Triggers -# - -# -# InfiniBand support -# - -# -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# - -# -# Real Time Clock -# +# CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set - -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# +# CONFIG_DMADEVICES is not set +# CONFIG_UIO is not set # # File systems @@ -561,12 +518,9 @@ CONFIG_HID=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set -# CONFIG_MINIX_FS is not set -CONFIG_ROMFS_FS=y +# CONFIG_DNOTIFY is not set # CONFIG_INOTIFY is not set # CONFIG_QUOTA is not set -# CONFIG_DNOTIFY is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -592,7 +546,6 @@ CONFIG_PROC_SYSCTL=y # CONFIG_SYSFS is not set # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y # # Miscellaneous filesystems @@ -607,8 +560,11 @@ CONFIG_RAMFS=y # CONFIG_JFFS2_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +CONFIG_ROMFS_FS=y # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set @@ -617,28 +573,23 @@ CONFIG_RAMFS=y # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# # CONFIG_NLS is not set # -# Profiling support -# -# CONFIG_PROFILING is not set - -# # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y # CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_SAMPLES is not set # CONFIG_SH_STANDARD_BIOS is not set # CONFIG_EARLY_SCIF_CONSOLE is not set @@ -646,20 +597,20 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y # Security options # # CONFIG_KEYS is not set - -# -# Cryptographic options -# +# CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_CRYPTO is not set # # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_HAS_IOMEM=y diff --git a/arch/sh/configs/se7712_defconfig b/arch/sh/configs/se7712_defconfig index 2dd83af988f0..7be79cd04eb0 100644 --- a/arch/sh/configs/se7712_defconfig +++ b/arch/sh/configs/se7712_defconfig @@ -1,53 +1,57 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.21-rc4 -# Wed Mar 28 10:19:02 2007 +# Linux kernel version: 2.6.26-rc6 +# Wed Jun 18 16:36:08 2008 # CONFIG_SUPERH=y +CONFIG_SUPERH32=y CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_CALIBRATE_DELAY=y -# CONFIG_GENERIC_TIME is not set +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_NO_VIRT_TO_BUS=y +CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" # CONFIG_LOCALVERSION_AUTO is not set # CONFIG_SWAP is not set CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +# CONFIG_GROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set # CONFIG_BLK_DEV_INITRD is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -55,33 +59,41 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y # CONFIG_BUG is not set CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y # CONFIG_BASE_FULL is not set CONFIG_FUTEX=y +CONFIG_ANON_INODES=y CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y # CONFIG_SHMEM is not set -CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_KPROBES is not set +# CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_DMA_ATTRS is not set +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=1 -# CONFIG_SLOB is not set - -# -# Loadable module support -# CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set # CONFIG_MODULE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set # CONFIG_KMOD is not set - -# -# Block layer -# CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set # # IO Schedulers @@ -95,57 +107,17 @@ CONFIG_IOSCHED_NOOP=y # CONFIG_DEFAULT_CFQ is not set CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" +CONFIG_CLASSIC_RCU=y # # System type # -CONFIG_SOLUTION_ENGINE=y -CONFIG_SH_SOLUTION_ENGINE=y -# CONFIG_SH_7751_SOLUTION_ENGINE is not set -# CONFIG_SH_7300_SOLUTION_ENGINE is not set -# CONFIG_SH_7343_SOLUTION_ENGINE is not set -# CONFIG_SH_73180_SOLUTION_ENGINE is not set -# CONFIG_SH_7751_SYSTEMH is not set -# CONFIG_SH_HP6XX is not set -# CONFIG_SH_SATURN is not set -# CONFIG_SH_DREAMCAST is not set -# CONFIG_SH_MPC1211 is not set -# CONFIG_SH_SH03 is not set -# CONFIG_SH_SECUREEDGE5410 is not set -# CONFIG_SH_HS7751RVOIP is not set -# CONFIG_SH_7710VOIPGW is not set -# CONFIG_SH_RTS7751R2D is not set -# CONFIG_SH_HIGHLANDER is not set -# CONFIG_SH_EDOSK7705 is not set -# CONFIG_SH_SH4202_MICRODEV is not set -# CONFIG_SH_LANDISK is not set -# CONFIG_SH_TITAN is not set -# CONFIG_SH_SHMIN is not set -# CONFIG_SH_7206_SOLUTION_ENGINE is not set -# CONFIG_SH_7619_SOLUTION_ENGINE is not set -# CONFIG_SH_LBOX_RE2 is not set -# CONFIG_SH_UNKNOWN is not set - -# -# Processor selection -# CONFIG_CPU_SH3=y - -# -# SH-2 Processor Support -# -# CONFIG_CPU_SUBTYPE_SH7604 is not set # CONFIG_CPU_SUBTYPE_SH7619 is not set - -# -# SH-2A Processor Support -# +# CONFIG_CPU_SUBTYPE_SH7203 is not set # CONFIG_CPU_SUBTYPE_SH7206 is not set - -# -# SH-3 Processor Support -# -# CONFIG_CPU_SUBTYPE_SH7300 is not set +# CONFIG_CPU_SUBTYPE_SH7263 is not set +# CONFIG_CPU_SUBTYPE_MXG is not set # CONFIG_CPU_SUBTYPE_SH7705 is not set # CONFIG_CPU_SUBTYPE_SH7706 is not set # CONFIG_CPU_SUBTYPE_SH7707 is not set @@ -153,10 +125,8 @@ CONFIG_CPU_SH3=y # CONFIG_CPU_SUBTYPE_SH7709 is not set # CONFIG_CPU_SUBTYPE_SH7710 is not set CONFIG_CPU_SUBTYPE_SH7712=y - -# -# SH-4 Processor Support -# +# CONFIG_CPU_SUBTYPE_SH7720 is not set +# CONFIG_CPU_SUBTYPE_SH7721 is not set # CONFIG_CPU_SUBTYPE_SH7750 is not set # CONFIG_CPU_SUBTYPE_SH7091 is not set # CONFIG_CPU_SUBTYPE_SH7750R is not set @@ -165,37 +135,37 @@ CONFIG_CPU_SUBTYPE_SH7712=y # CONFIG_CPU_SUBTYPE_SH7751R is not set # CONFIG_CPU_SUBTYPE_SH7760 is not set # CONFIG_CPU_SUBTYPE_SH4_202 is not set - -# -# ST40 Processor Support -# -# CONFIG_CPU_SUBTYPE_ST40STB1 is not set -# CONFIG_CPU_SUBTYPE_ST40GX1 is not set - -# -# SH-4A Processor Support -# +# CONFIG_CPU_SUBTYPE_SH7723 is not set +# CONFIG_CPU_SUBTYPE_SH7763 is not set # CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set # CONFIG_CPU_SUBTYPE_SH7785 is not set - -# -# SH4AL-DSP Processor Support -# -# CONFIG_CPU_SUBTYPE_SH73180 is not set +# CONFIG_CPU_SUBTYPE_SHX3 is not set # CONFIG_CPU_SUBTYPE_SH7343 is not set # CONFIG_CPU_SUBTYPE_SH7722 is not set +# CONFIG_CPU_SUBTYPE_SH7366 is not set +# CONFIG_CPU_SUBTYPE_SH5_101 is not set +# CONFIG_CPU_SUBTYPE_SH5_103 is not set # # Memory management options # +CONFIG_QUICKLIST=y CONFIG_MMU=y CONFIG_PAGE_OFFSET=0x80000000 CONFIG_MEMORY_START=0x0c000000 CONFIG_MEMORY_SIZE=0x02000000 +CONFIG_29BIT=y CONFIG_VSYSCALL=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_DEFAULT=y +CONFIG_MAX_ACTIVE_REGIONS=1 +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y @@ -203,21 +173,21 @@ CONFIG_FLATMEM_MANUAL=y # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPARSEMEM_STATIC=y +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 +CONFIG_NR_QUICK=2 # # Cache configuration # # CONFIG_SH_DIRECT_MAPPED is not set -# CONFIG_SH_WRITETHROUGH is not set -# CONFIG_SH_OCRAM is not set -CONFIG_CF_ENABLER=y -# CONFIG_CF_AREA5 is not set -CONFIG_CF_AREA6=y -CONFIG_CF_BASE_ADDR=0xb8000000 +CONFIG_CACHE_WRITEBACK=y +# CONFIG_CACHE_WRITETHROUGH is not set +# CONFIG_CACHE_OFF is not set # # Processor features @@ -230,6 +200,14 @@ CONFIG_CPU_LITTLE_ENDIAN=y CONFIG_CPU_HAS_INTEVT=y CONFIG_CPU_HAS_IPR_IRQ=y CONFIG_CPU_HAS_SR_RB=y +CONFIG_CPU_HAS_DSP=y + +# +# Board support +# +CONFIG_SOLUTION_ENGINE=y +CONFIG_SH_SOLUTION_ENGINE=y +# CONFIG_SH_AP325RXA is not set # # Timer and clock configuration @@ -237,6 +215,10 @@ CONFIG_CPU_HAS_SR_RB=y CONFIG_SH_TMU=y CONFIG_SH_TIMER_IRQ=16 CONFIG_SH_PCLK_FREQ=66666666 +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # # CPU Frequency scaling @@ -251,7 +233,6 @@ CONFIG_SH_PCLK_FREQ=66666666 # # Companion Chips # -# CONFIG_HD6446X_SERIES is not set # # Additional SuperH Device Drivers @@ -267,48 +248,40 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set # CONFIG_KEXEC is not set -# CONFIG_SMP is not set +# CONFIG_CRASH_DUMP is not set # CONFIG_PREEMPT_NONE is not set CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set +CONFIG_GUSA=y +# CONFIG_GUSA_RB is not set # # Boot options # CONFIG_ZERO_PAGE_OFFSET=0x00001000 CONFIG_BOOT_LINK_OFFSET=0x00800000 -# CONFIG_UBC_WAKEUP is not set CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda1" # # Bus options # -# CONFIG_PCI is not set - -# -# PCCARD (PCMCIA/CardBus) support -# +CONFIG_CF_ENABLER=y +# CONFIG_CF_AREA5 is not set +CONFIG_CF_AREA6=y +CONFIG_CF_BASE_ADDR=0xb8000000 +# CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_PCCARD is not set # -# PCI Hotplug Support -# - -# # Executable file formats # CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_FLAT is not set # CONFIG_BINFMT_MISC is not set # -# Power management options (EXPERIMENTAL) -# -# CONFIG_PM is not set - -# # Networking # CONFIG_NET=y @@ -316,7 +289,6 @@ CONFIG_NET=y # # Networking options # -# CONFIG_NETDEBUG is not set CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -324,6 +296,7 @@ CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set CONFIG_NET_KEY=y # CONFIG_NET_KEY_MIGRATE is not set CONFIG_INET=y @@ -334,11 +307,10 @@ CONFIG_ASK_IP_FIB_HASH=y CONFIG_IP_FIB_HASH=y CONFIG_IP_MULTIPLE_TABLES=y CONFIG_IP_ROUTE_MULTIPATH=y -# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set CONFIG_IP_ROUTE_VERBOSE=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y -# CONFIG_IP_PNP_BOOTP is not set +CONFIG_IP_PNP_BOOTP=y # CONFIG_IP_PNP_RARP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set @@ -355,30 +327,17 @@ CONFIG_INET_TUNNEL=y CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set # CONFIG_INET_DIAG is not set # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# # CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# # CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -391,15 +350,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# CONFIG_NET_SCHED=y -CONFIG_NET_SCH_FIFO=y -CONFIG_NET_SCH_CLK_JIFFIES=y -# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set -# CONFIG_NET_SCH_CLK_CPU is not set # # Queueing/Scheduling @@ -408,6 +359,7 @@ CONFIG_NET_SCH_CBQ=y CONFIG_NET_SCH_HTB=y CONFIG_NET_SCH_HFSC=y CONFIG_NET_SCH_PRIO=y +# CONFIG_NET_SCH_RR is not set CONFIG_NET_SCH_RED=y CONFIG_NET_SCH_SFQ=y CONFIG_NET_SCH_TEQL=y @@ -415,7 +367,6 @@ CONFIG_NET_SCH_TBF=y CONFIG_NET_SCH_GRED=y CONFIG_NET_SCH_DSMARK=y CONFIG_NET_SCH_NETEM=y -CONFIG_NET_SCH_INGRESS=y # # Classification @@ -429,50 +380,55 @@ CONFIG_NET_CLS_FW=y # CONFIG_NET_CLS_U32 is not set # CONFIG_NET_CLS_RSVP is not set # CONFIG_NET_CLS_RSVP6 is not set +# CONFIG_NET_CLS_FLOW is not set # CONFIG_NET_EMATCH is not set # CONFIG_NET_CLS_ACT is not set -# CONFIG_NET_CLS_POLICE is not set CONFIG_NET_CLS_IND=y -CONFIG_NET_ESTIMATOR=y +CONFIG_NET_SCH_FIFO=y # # Network testing # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set -# CONFIG_IEEE80211 is not set +# CONFIG_AF_RXRPC is not set CONFIG_FIB_RULES=y # +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# # Device Drivers # # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# # CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set CONFIG_MTD_CONCAT=y CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -485,6 +441,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set # CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set # # RAM/ROM/Flash chip drivers @@ -510,7 +467,6 @@ CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_RAM is not set # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_OBSOLETE_CHIPS is not set # # Mapping drivers for chip access @@ -533,44 +489,25 @@ CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# # CONFIG_MTD_NAND is not set - -# -# OneNAND Flash Device Drivers -# # CONFIG_MTD_ONENAND is not set # -# Parallel port support +# UBI - Unsorted block images # +# CONFIG_MTD_UBI is not set # CONFIG_PARPORT is not set - -# -# Plug and Play support -# -# CONFIG_PNPACPI is not set - -# -# Block devices -# +CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_RAM is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set - -# -# Misc devices -# - -# -# ATA/ATAPI/MFM/RLL support -# +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -578,6 +515,7 @@ CONFIG_MTD_CFI_UTIL=y # # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y +CONFIG_SCSI_DMA=y # CONFIG_SCSI_TGT is not set # CONFIG_SCSI_NETLINK is not set CONFIG_SCSI_PROC_FS=y @@ -599,6 +537,7 @@ CONFIG_BLK_DEV_SD=y # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set # CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m # # SCSI Transports @@ -606,94 +545,72 @@ CONFIG_BLK_DEV_SD=y # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set - -# -# SCSI low-level drivers -# +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_DEBUG is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_SATA_PMP=y +CONFIG_ATA_SFF=y +# CONFIG_SATA_MV is not set CONFIG_PATA_PLATFORM=y - -# -# Multi-device support (RAID and LVM) -# # CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# Network device support -# CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set - -# -# PHY device support -# - -# -# Ethernet (10 or 100Mbit) -# -# CONFIG_NET_ETHERNET is not set - -# -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices -# - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# +# CONFIG_VETH is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_FIXED_PHY is not set +CONFIG_MDIO_BITBANG=y +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +# CONFIG_STNIC is not set +CONFIG_SH_ETH=y +# CONFIG_SMC91X is not set +# CONFIG_SMC911X is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set +CONFIG_NETDEV_1000=y +# CONFIG_E1000E_ENABLED is not set +CONFIG_NETDEV_10000=y + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set - -# -# Telephony Support -# # CONFIG_PHONE is not set # @@ -711,6 +628,7 @@ CONFIG_NETDEVICES=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -728,99 +646,78 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y # CONFIG_LEGACY_PTYS is not set - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set CONFIG_HW_RANDOM=m -# CONFIG_GEN_RTC is not set -# CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# # CONFIG_TCG_TPM is not set - -# -# I2C support -# # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# # CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_WATCHDOG is not set # -# Hardware Monitoring support +# Sonics Silicon Backplane # -# CONFIG_HWMON is not set -# CONFIG_HWMON_VID is not set +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set # -# Digital Video Broadcasting Devices +# Multimedia drivers # -# CONFIG_DVB is not set +# CONFIG_DAB is not set # # Graphics support # -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set # CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # -# Sound +# Display device support # -# CONFIG_SOUND is not set +# CONFIG_DISPLAY_SUPPORT is not set # -# USB support +# Sound # -# CONFIG_USB_ARCH_HAS_HCD is not set +# CONFIG_SOUND is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_USB_ARCH_HAS_OHCI is not set # CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # - -# -# USB Gadget Support -# # CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# # CONFIG_MMC is not set - -# -# LED devices -# +# CONFIG_MEMSTICK is not set CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y @@ -834,40 +731,10 @@ CONFIG_LEDS_CLASS=y CONFIG_LEDS_TRIGGERS=y # CONFIG_LEDS_TRIGGER_TIMER is not set # CONFIG_LEDS_TRIGGER_HEARTBEAT is not set - -# -# InfiniBand support -# - -# -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# - -# -# Real Time Clock -# +# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set - -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# - -# -# Auxiliary Display support -# - -# -# Virtualization -# +# CONFIG_UIO is not set # # File systems @@ -877,20 +744,21 @@ CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y CONFIG_EXT2_FS_SECURITY=y # CONFIG_EXT2_FS_XIP is not set -# CONFIG_EXT3_FS is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set # CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +# CONFIG_DNOTIFY is not set # CONFIG_INOTIFY is not set # CONFIG_QUOTA is not set -# CONFIG_DNOTIFY is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -919,7 +787,6 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set # @@ -935,68 +802,67 @@ CONFIG_RAMFS=y CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set # CONFIG_JFFS2_SUMMARY is not set # CONFIG_JFFS2_FS_XATTR is not set # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# -# CONFIG_NFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +# CONFIG_NFS_V3 is not set +# CONFIG_NFS_V4 is not set # CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# # CONFIG_NLS is not set - -# -# Distributed Lock Manager -# # CONFIG_DLM is not set # -# Profiling support -# -# CONFIG_PROFILING is not set - -# # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set -CONFIG_LOG_BUF_SHIFT=14 # CONFIG_DETECT_SOFTLOCKUP is not set +CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set @@ -1004,21 +870,28 @@ CONFIG_LOG_BUF_SHIFT=14 # CONFIG_DEBUG_MUTEXES is not set # CONFIG_DEBUG_LOCK_ALLOC is not set # CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set CONFIG_FRAME_POINTER=y -# CONFIG_FORCED_INLINING is not set +# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_SAMPLES is not set # CONFIG_SH_STANDARD_BIOS is not set # CONFIG_EARLY_SCIF_CONSOLE is not set +# CONFIG_DEBUG_BOOTMEM is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_4KSTACKS is not set +# CONFIG_IRQSTACKS is not set # CONFIG_SH_KGDB is not set # @@ -1026,62 +899,100 @@ CONFIG_FRAME_POINTER=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y # -# Cryptographic options +# Crypto core or helper # -CONFIG_CRYPTO=y CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +CONFIG_CRYPTO_AUTHENC=y +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=m +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# CONFIG_CRYPTO_HMAC=y # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set CONFIG_CRYPTO_SHA1=y # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_LRW is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -CONFIG_CRYPTO_DEFLATE=y -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set # -# Hardware crypto devices +# Compression # +CONFIG_CRYPTO_DEFLATE=y +# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_HW=y # # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set CONFIG_CRC_CCITT=y # CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/sh/configs/sh7763rdp_defconfig b/arch/sh/configs/sh7763rdp_defconfig new file mode 100644 index 000000000000..83f3fe5db3e5 --- /dev/null +++ b/arch/sh/configs/sh7763rdp_defconfig @@ -0,0 +1,1052 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.26-rc4 +# Fri Jun 6 12:20:17 2008 +# +CONFIG_SUPERH=y +CONFIG_SUPERH32=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_BUG=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_NO_VIRT_TO_BUS=y +CONFIG_ARCH_SUPPORTS_AOUT=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +CONFIG_NAMESPACES=y +CONFIG_UTS_NS=y +CONFIG_IPC_NS=y +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_PROFILING=y +# CONFIG_MARKERS is not set +CONFIG_OPROFILE=y +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_KPROBES is not set +# CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_DMA_ATTRS is not set +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +# CONFIG_MODULE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +# CONFIG_KMOD is not set +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y + +# +# System type +# +CONFIG_CPU_SH4=y +CONFIG_CPU_SH4A=y +# CONFIG_CPU_SUBTYPE_SH7619 is not set +# CONFIG_CPU_SUBTYPE_SH7203 is not set +# CONFIG_CPU_SUBTYPE_SH7206 is not set +# CONFIG_CPU_SUBTYPE_SH7263 is not set +# CONFIG_CPU_SUBTYPE_MXG is not set +# CONFIG_CPU_SUBTYPE_SH7705 is not set +# CONFIG_CPU_SUBTYPE_SH7706 is not set +# CONFIG_CPU_SUBTYPE_SH7707 is not set +# CONFIG_CPU_SUBTYPE_SH7708 is not set +# CONFIG_CPU_SUBTYPE_SH7709 is not set +# CONFIG_CPU_SUBTYPE_SH7710 is not set +# CONFIG_CPU_SUBTYPE_SH7712 is not set +# CONFIG_CPU_SUBTYPE_SH7720 is not set +# CONFIG_CPU_SUBTYPE_SH7721 is not set +# CONFIG_CPU_SUBTYPE_SH7750 is not set +# CONFIG_CPU_SUBTYPE_SH7091 is not set +# CONFIG_CPU_SUBTYPE_SH7750R is not set +# CONFIG_CPU_SUBTYPE_SH7750S is not set +# CONFIG_CPU_SUBTYPE_SH7751 is not set +# CONFIG_CPU_SUBTYPE_SH7751R is not set +# CONFIG_CPU_SUBTYPE_SH7760 is not set +# CONFIG_CPU_SUBTYPE_SH4_202 is not set +# CONFIG_CPU_SUBTYPE_SH7723 is not set +CONFIG_CPU_SUBTYPE_SH7763=y +# CONFIG_CPU_SUBTYPE_SH7770 is not set +# CONFIG_CPU_SUBTYPE_SH7780 is not set +# CONFIG_CPU_SUBTYPE_SH7785 is not set +# CONFIG_CPU_SUBTYPE_SHX3 is not set +# CONFIG_CPU_SUBTYPE_SH7343 is not set +# CONFIG_CPU_SUBTYPE_SH7722 is not set +# CONFIG_CPU_SUBTYPE_SH7366 is not set +# CONFIG_CPU_SUBTYPE_SH5_101 is not set +# CONFIG_CPU_SUBTYPE_SH5_103 is not set + +# +# Memory management options +# +CONFIG_QUICKLIST=y +CONFIG_MMU=y +CONFIG_PAGE_OFFSET=0x80000000 +CONFIG_MEMORY_START=0x0c000000 +CONFIG_MEMORY_SIZE=0x04000000 +CONFIG_29BIT=y +CONFIG_VSYSCALL=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_DEFAULT=y +CONFIG_MAX_ACTIVE_REGIONS=1 +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_PAGE_SIZE_4KB=y +# CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_16KB is not set +# CONFIG_PAGE_SIZE_64KB is not set +CONFIG_SELECT_MEMORY_MODEL=y +# CONFIG_FLATMEM_MANUAL is not set +# CONFIG_DISCONTIGMEM_MANUAL is not set +CONFIG_SPARSEMEM_MANUAL=y +CONFIG_SPARSEMEM=y +CONFIG_HAVE_MEMORY_PRESENT=y +CONFIG_SPARSEMEM_STATIC=y +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +# CONFIG_MEMORY_HOTPLUG is not set +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_NR_QUICK=2 + +# +# Cache configuration +# +# CONFIG_SH_DIRECT_MAPPED is not set +CONFIG_CACHE_WRITEBACK=y +# CONFIG_CACHE_WRITETHROUGH is not set +# CONFIG_CACHE_OFF is not set + +# +# Processor features +# +CONFIG_CPU_LITTLE_ENDIAN=y +# CONFIG_CPU_BIG_ENDIAN is not set +CONFIG_SH_FPU=y +# CONFIG_SH_STORE_QUEUES is not set +CONFIG_CPU_HAS_INTEVT=y +CONFIG_CPU_HAS_SR_RB=y +CONFIG_CPU_HAS_FPU=y + +# +# Board support +# +CONFIG_SH_SH7763RDP=y + +# +# Timer and clock configuration +# +CONFIG_SH_TMU=y +CONFIG_SH_TIMER_IRQ=28 +CONFIG_SH_PCLK_FREQ=66666666 +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# DMA support +# +# CONFIG_SH_DMA is not set + +# +# Companion Chips +# + +# +# Additional SuperH Device Drivers +# +# CONFIG_HEARTBEAT is not set +# CONFIG_PUSH_SWITCH is not set + +# +# Kernel features +# +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set +# CONFIG_KEXEC is not set +# CONFIG_CRASH_DUMP is not set +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_GUSA=y + +# +# Boot options +# +CONFIG_ZERO_PAGE_OFFSET=0x00001000 +CONFIG_BOOT_LINK_OFFSET=0x00800000 +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE="console=ttySC2,115200 root=/dev/sda1 rootdelay=10" + +# +# Bus options +# +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Executable file formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +CONFIG_WIRELESS_EXT=y +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +# CONFIG_MTD_CHAR is not set +CONFIG_MTD_BLKDEVS=y +# CONFIG_MTD_BLOCK is not set +# CONFIG_MTD_BLOCK_RO is not set +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +CONFIG_MTD_JEDECPROBE=y +CONFIG_MTD_GEN_PROBE=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +CONFIG_MTD_CFI_NOSWAP=y +# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set +# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set +CONFIG_MTD_CFI_GEOMETRY=y +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_OTP is not set +CONFIG_MTD_CFI_INTELEXT=y +CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_CFI_STAA=y +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +CONFIG_MTD_COMPLEX_MAPPINGS=y +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0x8000000 +CONFIG_MTD_PHYSMAP_LEN=0 +CONFIG_MTD_PHYSMAP_BANKWIDTH=2 +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_FIXED_PHY is not set +CONFIG_MDIO_BITBANG=y +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +# CONFIG_STNIC is not set +# CONFIG_SMC91X is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_SH_SCI=y +CONFIG_SERIAL_SH_SCI_NR_UARTS=3 +CONFIG_SERIAL_SH_SCI_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set +# CONFIG_SPI is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Sound +# +# CONFIG_SOUND is not set +# CONFIG_HID_SUPPORT is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set + +# +# Miscellaneous USB options +# +# CONFIG_USB_DEVICEFS is not set +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_GADGET is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_RTC_CLASS is not set +# CONFIG_UIO is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_AUTOFS_FS=y +CONFIG_AUTOFS4_FS=y +# CONFIG_FUSE_FS is not set +CONFIG_GENERIC_ACL=y + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y +# CONFIG_HUGETLBFS is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +# CONFIG_NFS_V3 is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_CODEPAGE_737=y +CONFIG_NLS_CODEPAGE_775=y +CONFIG_NLS_CODEPAGE_850=y +CONFIG_NLS_CODEPAGE_852=y +CONFIG_NLS_CODEPAGE_855=y +CONFIG_NLS_CODEPAGE_857=y +CONFIG_NLS_CODEPAGE_860=y +CONFIG_NLS_CODEPAGE_861=y +CONFIG_NLS_CODEPAGE_862=y +CONFIG_NLS_CODEPAGE_863=y +CONFIG_NLS_CODEPAGE_864=y +CONFIG_NLS_CODEPAGE_865=y +CONFIG_NLS_CODEPAGE_866=y +CONFIG_NLS_CODEPAGE_869=y +CONFIG_NLS_CODEPAGE_936=y +CONFIG_NLS_CODEPAGE_950=y +CONFIG_NLS_CODEPAGE_932=y +CONFIG_NLS_CODEPAGE_949=y +CONFIG_NLS_CODEPAGE_874=y +CONFIG_NLS_ISO8859_8=y +CONFIG_NLS_CODEPAGE_1250=y +CONFIG_NLS_CODEPAGE_1251=y +CONFIG_NLS_ASCII=y +CONFIG_NLS_ISO8859_1=y +CONFIG_NLS_ISO8859_2=y +CONFIG_NLS_ISO8859_3=y +CONFIG_NLS_ISO8859_4=y +CONFIG_NLS_ISO8859_5=y +CONFIG_NLS_ISO8859_6=y +CONFIG_NLS_ISO8859_7=y +CONFIG_NLS_ISO8859_9=y +CONFIG_NLS_ISO8859_13=y +CONFIG_NLS_ISO8859_14=y +CONFIG_NLS_ISO8859_15=y +CONFIG_NLS_KOI8_R=y +CONFIG_NLS_KOI8_U=y +CONFIG_NLS_UTF8=y +# CONFIG_DLM is not set + +# +# Kernel hacking +# +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +# CONFIG_PRINTK_TIME is not set +# CONFIG_ENABLE_WARN_DEPRECATED is not set +# CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_SAMPLES is not set +# CONFIG_SH_STANDARD_BIOS is not set +# CONFIG_EARLY_SCIF_CONSOLE is not set +# CONFIG_SH_KGDB is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_HW=y + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/sh/configs/sh7785lcr_defconfig b/arch/sh/configs/sh7785lcr_defconfig new file mode 100644 index 000000000000..ff72697365d1 --- /dev/null +++ b/arch/sh/configs/sh7785lcr_defconfig @@ -0,0 +1,1388 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.26-rc8 +# Tue Jul 15 21:37:59 2008 +# +CONFIG_SUPERH=y +CONFIG_SUPERH32=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_BUG=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_SYS_SUPPORTS_NUMA=y +CONFIG_SYS_SUPPORTS_PCI=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_NO_VIRT_TO_BUS=y +CONFIG_ARCH_SUPPORTS_AOUT=y +CONFIG_IO_TRAPPED=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_PROFILING=y +# CONFIG_MARKERS is not set +# CONFIG_OPROFILE is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_KPROBES is not set +# CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_DMA_ATTRS is not set +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +CONFIG_CLASSIC_RCU=y + +# +# System type +# +CONFIG_CPU_SH4=y +CONFIG_CPU_SH4A=y +CONFIG_CPU_SHX2=y +# CONFIG_CPU_SUBTYPE_SH7619 is not set +# CONFIG_CPU_SUBTYPE_SH7203 is not set +# CONFIG_CPU_SUBTYPE_SH7206 is not set +# CONFIG_CPU_SUBTYPE_SH7263 is not set +# CONFIG_CPU_SUBTYPE_MXG is not set +# CONFIG_CPU_SUBTYPE_SH7705 is not set +# CONFIG_CPU_SUBTYPE_SH7706 is not set +# CONFIG_CPU_SUBTYPE_SH7707 is not set +# CONFIG_CPU_SUBTYPE_SH7708 is not set +# CONFIG_CPU_SUBTYPE_SH7709 is not set +# CONFIG_CPU_SUBTYPE_SH7710 is not set +# CONFIG_CPU_SUBTYPE_SH7712 is not set +# CONFIG_CPU_SUBTYPE_SH7720 is not set +# CONFIG_CPU_SUBTYPE_SH7721 is not set +# CONFIG_CPU_SUBTYPE_SH7750 is not set +# CONFIG_CPU_SUBTYPE_SH7091 is not set +# CONFIG_CPU_SUBTYPE_SH7750R is not set +# CONFIG_CPU_SUBTYPE_SH7750S is not set +# CONFIG_CPU_SUBTYPE_SH7751 is not set +# CONFIG_CPU_SUBTYPE_SH7751R is not set +# CONFIG_CPU_SUBTYPE_SH7760 is not set +# CONFIG_CPU_SUBTYPE_SH4_202 is not set +# CONFIG_CPU_SUBTYPE_SH7723 is not set +# CONFIG_CPU_SUBTYPE_SH7763 is not set +# CONFIG_CPU_SUBTYPE_SH7770 is not set +# CONFIG_CPU_SUBTYPE_SH7780 is not set +CONFIG_CPU_SUBTYPE_SH7785=y +# CONFIG_CPU_SUBTYPE_SHX3 is not set +# CONFIG_CPU_SUBTYPE_SH7343 is not set +# CONFIG_CPU_SUBTYPE_SH7722 is not set +# CONFIG_CPU_SUBTYPE_SH7366 is not set +# CONFIG_CPU_SUBTYPE_SH5_101 is not set +# CONFIG_CPU_SUBTYPE_SH5_103 is not set + +# +# Memory management options +# +CONFIG_QUICKLIST=y +CONFIG_MMU=y +CONFIG_PAGE_OFFSET=0x80000000 +CONFIG_MEMORY_START=0x08000000 +CONFIG_MEMORY_SIZE=0x08000000 +CONFIG_29BIT=y +# CONFIG_PMB is not set +# CONFIG_X2TLB is not set +CONFIG_VSYSCALL=y +# CONFIG_NUMA is not set +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_DEFAULT=y +CONFIG_MAX_ACTIVE_REGIONS=2 +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_PAGE_SIZE_4KB=y +# CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_16KB is not set +# CONFIG_PAGE_SIZE_64KB is not set +CONFIG_SELECT_MEMORY_MODEL=y +# CONFIG_FLATMEM_MANUAL is not set +# CONFIG_DISCONTIGMEM_MANUAL is not set +CONFIG_SPARSEMEM_MANUAL=y +CONFIG_SPARSEMEM=y +CONFIG_HAVE_MEMORY_PRESENT=y +CONFIG_SPARSEMEM_STATIC=y +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +# CONFIG_MEMORY_HOTPLUG is not set +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_NR_QUICK=2 + +# +# Cache configuration +# +# CONFIG_SH_DIRECT_MAPPED is not set +CONFIG_CACHE_WRITEBACK=y +# CONFIG_CACHE_WRITETHROUGH is not set +# CONFIG_CACHE_OFF is not set + +# +# Processor features +# +CONFIG_CPU_LITTLE_ENDIAN=y +# CONFIG_CPU_BIG_ENDIAN is not set +CONFIG_SH_FPU=y +CONFIG_SH_STORE_QUEUES=y +CONFIG_CPU_HAS_INTEVT=y +CONFIG_CPU_HAS_SR_RB=y +CONFIG_CPU_HAS_PTEA=y +CONFIG_CPU_HAS_FPU=y + +# +# Board support +# +# CONFIG_SH_HIGHLANDER is not set +CONFIG_SH_SH7785LCR=y +CONFIG_SH_SH7785LCR_29BIT_PHYSMAPS=y + +# +# Timer and clock configuration +# +CONFIG_SH_TMU=y +CONFIG_SH_TIMER_IRQ=28 +CONFIG_SH_PCLK_FREQ=50000000 +CONFIG_TICK_ONESHOT=y +# CONFIG_NO_HZ is not set +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# DMA support +# +# CONFIG_SH_DMA is not set + +# +# Companion Chips +# + +# +# Additional SuperH Device Drivers +# +CONFIG_HEARTBEAT=y +# CONFIG_PUSH_SWITCH is not set + +# +# Kernel features +# +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set +CONFIG_KEXEC=y +# CONFIG_CRASH_DUMP is not set +# CONFIG_PREEMPT_NONE is not set +# CONFIG_PREEMPT_VOLUNTARY is not set +CONFIG_PREEMPT=y +# CONFIG_PREEMPT_RCU is not set +CONFIG_GUSA=y + +# +# Boot options +# +CONFIG_ZERO_PAGE_OFFSET=0x00001000 +CONFIG_BOOT_LINK_OFFSET=0x00800000 +# CONFIG_CMDLINE_BOOL is not set + +# +# Bus options +# +CONFIG_PCI=y +CONFIG_SH_PCIDMA_NONCOHERENT=y +CONFIG_PCI_AUTO=y +CONFIG_PCI_AUTO_UPDATE_RESOURCES=y +# CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_PCI_LEGACY=y +# CONFIG_PCI_DEBUG is not set +# CONFIG_PCCARD is not set +# CONFIG_HOTPLUG_PCI is not set + +# +# Executable file formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_ASK_IP_FIB_HASH=y +# CONFIG_IP_FIB_TRIE is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_MULTIPLE_TABLES is not set +# CONFIG_IP_ROUTE_MULTIPATH is not set +# CONFIG_IP_ROUTE_VERBOSE is not set +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +CONFIG_WIRELESS_EXT=y +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0x00000000 +CONFIG_MTD_PHYSMAP_LEN=0x0 +CONFIG_MTD_PHYSMAP_BANKWIDTH=0 +# CONFIG_MTD_INTEL_VR_NOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +# CONFIG_SCSI_LOWLEVEL is not set +CONFIG_ATA=y +# CONFIG_ATA_NONSTANDARD is not set +CONFIG_SATA_PMP=y +# CONFIG_SATA_AHCI is not set +# CONFIG_SATA_SIL24 is not set +CONFIG_ATA_SFF=y +# CONFIG_SATA_SVW is not set +# CONFIG_ATA_PIIX is not set +# CONFIG_SATA_MV is not set +# CONFIG_SATA_NV is not set +# CONFIG_PDC_ADMA is not set +# CONFIG_SATA_QSTOR is not set +# CONFIG_SATA_PROMISE is not set +# CONFIG_SATA_SX4 is not set +CONFIG_SATA_SIL=y +# CONFIG_SATA_SIS is not set +# CONFIG_SATA_ULI is not set +# CONFIG_SATA_VIA is not set +# CONFIG_SATA_VITESSE is not set +# CONFIG_SATA_INIC162X is not set +# CONFIG_PATA_ALI is not set +# CONFIG_PATA_AMD is not set +# CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATIIXP is not set +# CONFIG_PATA_CMD640_PCI is not set +# CONFIG_PATA_CMD64X is not set +# CONFIG_PATA_CS5520 is not set +# CONFIG_PATA_CS5530 is not set +# CONFIG_PATA_CYPRESS is not set +# CONFIG_PATA_EFAR is not set +# CONFIG_ATA_GENERIC is not set +# CONFIG_PATA_HPT366 is not set +# CONFIG_PATA_HPT37X is not set +# CONFIG_PATA_HPT3X2N is not set +# CONFIG_PATA_HPT3X3 is not set +# CONFIG_PATA_IT821X is not set +# CONFIG_PATA_IT8213 is not set +# CONFIG_PATA_JMICRON is not set +# CONFIG_PATA_TRIFLEX is not set +# CONFIG_PATA_MARVELL is not set +# CONFIG_PATA_MPIIX is not set +# CONFIG_PATA_OLDPIIX is not set +# CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NINJA32 is not set +# CONFIG_PATA_NS87410 is not set +# CONFIG_PATA_NS87415 is not set +# CONFIG_PATA_OPTI is not set +# CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PDC_OLD is not set +# CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RZ1000 is not set +# CONFIG_PATA_SC1200 is not set +# CONFIG_PATA_SERVERWORKS is not set +# CONFIG_PATA_PDC2027X is not set +# CONFIG_PATA_SIL680 is not set +# CONFIG_PATA_SIS is not set +# CONFIG_PATA_VIA is not set +# CONFIG_PATA_WINBOND is not set +# CONFIG_PATA_PLATFORM is not set +# CONFIG_PATA_SCH is not set +# CONFIG_MD is not set +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# Enable only one of the two stacks, unless you know what you are doing +# +# CONFIG_FIREWIRE is not set +# CONFIG_IEEE1394 is not set +# CONFIG_I2O is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_ARCNET is not set +# CONFIG_NET_ETHERNET is not set +CONFIG_NETDEV_1000=y +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_E1000E is not set +# CONFIG_E1000E_ENABLED is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +CONFIG_R8169=y +# CONFIG_R8169_NAPI is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set +# CONFIG_QLA3XXX is not set +# CONFIG_ATL1 is not set +# CONFIG_NETDEV_10000 is not set +# CONFIG_TR is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NET_FC is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_SH_KEYSC is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_SH_SCI=y +CONFIG_SERIAL_SH_SCI_NR_UARTS=6 +CONFIG_SERIAL_SH_SCI_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_DEVPORT=y +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +# CONFIG_I2C_CHARDEV is not set +CONFIG_I2C_ALGOPCA=y + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PROSAVAGE is not set +# CONFIG_I2C_SAVAGE4 is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_TINY_USB is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set +# CONFIG_I2C_VOODOO3 is not set +CONFIG_I2C_PCA_PLATFORM=y +# CONFIG_I2C_SH_MOBILE is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +# CONFIG_SPI is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +CONFIG_MFD_SM501=y +# CONFIG_HTC_PASIC3 is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_DRM is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_CIRRUS is not set +# CONFIG_FB_PM2 is not set +# CONFIG_FB_CYBER2000 is not set +# CONFIG_FB_ASILIANT is not set +# CONFIG_FB_IMSTT is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_NVIDIA is not set +# CONFIG_FB_RIVA is not set +# CONFIG_FB_MATROX is not set +# CONFIG_FB_RADEON is not set +# CONFIG_FB_ATY128 is not set +# CONFIG_FB_ATY is not set +# CONFIG_FB_S3 is not set +# CONFIG_FB_SAVAGE is not set +# CONFIG_FB_SIS is not set +# CONFIG_FB_NEOMAGIC is not set +# CONFIG_FB_KYRO is not set +# CONFIG_FB_3DFX is not set +# CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_VT8623 is not set +# CONFIG_FB_TRIDENT is not set +# CONFIG_FB_ARK is not set +# CONFIG_FB_PM3 is not set +CONFIG_FB_SM501=y +# CONFIG_FB_VIRTUAL is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +CONFIG_LOGO_LINUX_CLUT224=y +# CONFIG_LOGO_SUPERH_MONO is not set +# CONFIG_LOGO_SUPERH_VGA16 is not set +# CONFIG_LOGO_SUPERH_CLUT224 is not set + +# +# Sound +# +# CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_USB_HIDINPUT_POWERBOOK is not set +# CONFIG_HID_FF is not set +# CONFIG_USB_HIDDEV is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +CONFIG_USB_EHCI_HCD=m +# CONFIG_USB_EHCI_ROOT_HUB_TT is not set +# CONFIG_USB_EHCI_TT_NEWSCHED is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +CONFIG_USB_OHCI_HCD=m +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_UHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set +CONFIG_USB_R8A66597_HCD=y + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +CONFIG_USB_TEST=m +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_GADGET is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_INFINIBAND is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +CONFIG_RTC_DRV_RS5C372=y +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +# CONFIG_RTC_DRV_SH is not set +# CONFIG_UIO is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +CONFIG_NTFS_FS=y +# CONFIG_NTFS_DEBUG is not set +CONFIG_NTFS_RW=y + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLBFS is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +CONFIG_MINIX_FS=y +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +CONFIG_NFSD=y +CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set +CONFIG_NFSD_V4=y +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_BIND34 is not set +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +CONFIG_NLS_CODEPAGE_932=y +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set +# CONFIG_DLM is not set + +# +# Kernel hacking +# +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +# CONFIG_PRINTK_TIME is not set +# CONFIG_ENABLE_WARN_DEPRECATED is not set +# CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_PREEMPT=y +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_FRAME_POINTER is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_SAMPLES is not set +# CONFIG_SH_STANDARD_BIOS is not set +# CONFIG_EARLY_SCIF_CONSOLE is not set +# CONFIG_DEBUG_BOOTMEM is not set +# CONFIG_DEBUG_STACKOVERFLOW is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_4KSTACKS is not set +# CONFIG_IRQSTACKS is not set +# CONFIG_SH_KGDB is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +CONFIG_CRYPTO_HMAC=y +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_LZO is not set +# CONFIG_CRYPTO_HW is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/sh/drivers/dma/dma-g2.c b/arch/sh/drivers/dma/dma-g2.c index 0caf11bb7e27..af7bb589c2c8 100644 --- a/arch/sh/drivers/dma/dma-g2.c +++ b/arch/sh/drivers/dma/dma-g2.c @@ -14,8 +14,8 @@ #include <linux/module.h> #include <linux/interrupt.h> #include <asm/cacheflush.h> -#include <asm/mach/sysasic.h> -#include <asm/mach/dma.h> +#include <mach/sysasic.h> +#include <mach/dma.h> #include <asm/dma.h> struct g2_channel { diff --git a/arch/sh/drivers/dma/dma-pvr2.c b/arch/sh/drivers/dma/dma-pvr2.c index 838fad566eaf..391cbe1c2956 100644 --- a/arch/sh/drivers/dma/dma-pvr2.c +++ b/arch/sh/drivers/dma/dma-pvr2.c @@ -13,8 +13,8 @@ #include <linux/kernel.h> #include <linux/module.h> #include <linux/interrupt.h> -#include <asm/mach/sysasic.h> -#include <asm/mach/dma.h> +#include <mach/sysasic.h> +#include <mach/dma.h> #include <asm/dma.h> #include <asm/io.h> diff --git a/arch/sh/drivers/dma/dma-sh.c b/arch/sh/drivers/dma/dma-sh.c index 71ff3d6f26e2..b2ffe649c7c0 100644 --- a/arch/sh/drivers/dma/dma-sh.c +++ b/arch/sh/drivers/dma/dma-sh.c @@ -14,7 +14,7 @@ #include <linux/init.h> #include <linux/interrupt.h> #include <linux/module.h> -#include <asm/dreamcast/dma.h> +#include <mach-dreamcast/mach/dma.h> #include <asm/dma.h> #include <asm/io.h> #include "dma-sh.h" diff --git a/arch/sh/drivers/dma/dma-sh.h b/arch/sh/drivers/dma/dma-sh.h index 0f591fbc922d..b05af34fc15d 100644 --- a/arch/sh/drivers/dma/dma-sh.h +++ b/arch/sh/drivers/dma/dma-sh.h @@ -11,7 +11,7 @@ #ifndef __DMA_SH_H #define __DMA_SH_H -#include <asm/cpu/dma.h> +#include <cpu/dma.h> /* Definitions for the SuperH DMAC */ #define REQ_L 0x00000000 diff --git a/arch/sh/drivers/dma/dma-sysfs.c b/arch/sh/drivers/dma/dma-sysfs.c index 51b57c0d1a3c..347ee11351ec 100644 --- a/arch/sh/drivers/dma/dma-sysfs.c +++ b/arch/sh/drivers/dma/dma-sysfs.c @@ -23,7 +23,8 @@ static struct sysdev_class dma_sysclass = { }; EXPORT_SYMBOL(dma_sysclass); -static ssize_t dma_show_devices(struct sys_device *dev, char *buf) +static ssize_t dma_show_devices(struct sys_device *dev, + struct sysdev_attribute *attr, char *buf) { ssize_t len = 0; int i; @@ -57,13 +58,15 @@ static int __init dma_sysclass_init(void) } postcore_initcall(dma_sysclass_init); -static ssize_t dma_show_dev_id(struct sys_device *dev, char *buf) +static ssize_t dma_show_dev_id(struct sys_device *dev, + struct sysdev_attribute *attr, char *buf) { struct dma_channel *channel = to_dma_channel(dev); return sprintf(buf, "%s\n", channel->dev_id); } static ssize_t dma_store_dev_id(struct sys_device *dev, + struct sysdev_attribute *attr, const char *buf, size_t count) { struct dma_channel *channel = to_dma_channel(dev); @@ -74,6 +77,7 @@ static ssize_t dma_store_dev_id(struct sys_device *dev, static SYSDEV_ATTR(dev_id, S_IRUGO | S_IWUSR, dma_show_dev_id, dma_store_dev_id); static ssize_t dma_store_config(struct sys_device *dev, + struct sysdev_attribute *attr, const char *buf, size_t count) { struct dma_channel *channel = to_dma_channel(dev); @@ -87,13 +91,15 @@ static ssize_t dma_store_config(struct sys_device *dev, static SYSDEV_ATTR(config, S_IWUSR, NULL, dma_store_config); -static ssize_t dma_show_mode(struct sys_device *dev, char *buf) +static ssize_t dma_show_mode(struct sys_device *dev, + struct sysdev_attribute *attr, char *buf) { struct dma_channel *channel = to_dma_channel(dev); return sprintf(buf, "0x%08x\n", channel->mode); } static ssize_t dma_store_mode(struct sys_device *dev, + struct sysdev_attribute *attr, const char *buf, size_t count) { struct dma_channel *channel = to_dma_channel(dev); @@ -104,7 +110,8 @@ static ssize_t dma_store_mode(struct sys_device *dev, static SYSDEV_ATTR(mode, S_IRUGO | S_IWUSR, dma_show_mode, dma_store_mode); #define dma_ro_attr(field, fmt) \ -static ssize_t dma_show_##field(struct sys_device *dev, char *buf) \ +static ssize_t dma_show_##field(struct sys_device *dev, \ + struct sysdev_attribute *attr, char *buf)\ { \ struct dma_channel *channel = to_dma_channel(dev); \ return sprintf(buf, fmt, channel->field); \ diff --git a/arch/sh/drivers/pci/Makefile b/arch/sh/drivers/pci/Makefile index 0718805774e8..847e90894d1b 100644 --- a/arch/sh/drivers/pci/Makefile +++ b/arch/sh/drivers/pci/Makefile @@ -23,3 +23,4 @@ obj-$(CONFIG_SH_LANDISK) += ops-landisk.o obj-$(CONFIG_SH_LBOX_RE2) += ops-lboxre2.o fixups-lboxre2.o obj-$(CONFIG_SH_7780_SOLUTION_ENGINE) += ops-se7780.o fixups-se7780.o obj-$(CONFIG_SH_CAYMAN) += ops-cayman.o +obj-$(CONFIG_SH_SH7785LCR) += ops-sh7785lcr.o fixups-sh7785lcr.o diff --git a/arch/sh/drivers/pci/fixups-dreamcast.c b/arch/sh/drivers/pci/fixups-dreamcast.c index c44699301eeb..2bf85cf091e1 100644 --- a/arch/sh/drivers/pci/fixups-dreamcast.c +++ b/arch/sh/drivers/pci/fixups-dreamcast.c @@ -26,7 +26,7 @@ #include <asm/io.h> #include <asm/irq.h> -#include <asm/mach/pci.h> +#include <mach/pci.h> static void __init gapspci_fixup_resources(struct pci_dev *dev) { diff --git a/arch/sh/drivers/pci/fixups-sh7785lcr.c b/arch/sh/drivers/pci/fixups-sh7785lcr.c new file mode 100644 index 000000000000..4949e601387a --- /dev/null +++ b/arch/sh/drivers/pci/fixups-sh7785lcr.c @@ -0,0 +1,46 @@ +/* + * arch/sh/drivers/pci/fixups-sh7785lcr.c + * + * R0P7785LC0011RL PCI fixups + * Copyright (C) 2008 Yoshihiro Shimoda + * + * Based on arch/sh/drivers/pci/fixups-r7780rp.c + * Copyright (C) 2003 Lineo uSolutions, Inc. + * Copyright (C) 2004 - 2006 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/pci.h> +#include "pci-sh4.h" + +int pci_fixup_pcic(void) +{ + pci_write_reg(0x000043ff, SH4_PCIINTM); + pci_write_reg(0x0000380f, SH4_PCIAINTM); + + pci_write_reg(0xfbb00047, SH7780_PCICMD); + pci_write_reg(0x00000000, SH7780_PCIIBAR); + + pci_write_reg(0x00011912, SH7780_PCISVID); + pci_write_reg(0x08000000, SH7780_PCICSCR0); + pci_write_reg(0x0000001b, SH7780_PCICSAR0); + pci_write_reg(0xfd000000, SH7780_PCICSCR1); + pci_write_reg(0x0000000f, SH7780_PCICSAR1); + + pci_write_reg(0xfd000000, SH7780_PCIMBR0); + pci_write_reg(0x00fc0000, SH7780_PCIMBMR0); + +#ifdef CONFIG_32BIT + pci_write_reg(0xc0000000, SH7780_PCIMBR2); + pci_write_reg(0x20000000 - SH7780_PCI_IO_SIZE, SH7780_PCIMBMR2); +#endif + + /* Set IOBR for windows containing area specified in pci.h */ + pci_write_reg((PCIBIOS_MIN_IO & ~(SH7780_PCI_IO_SIZE - 1)), + SH7780_PCIIOBR); + pci_write_reg(((SH7780_PCI_IO_SIZE - 1) & (7 << 18)), SH7780_PCIIOBMR); + + return 0; +} diff --git a/arch/sh/drivers/pci/ops-cayman.c b/arch/sh/drivers/pci/ops-cayman.c index 980275ffa30b..5ccf9ea3a9de 100644 --- a/arch/sh/drivers/pci/ops-cayman.c +++ b/arch/sh/drivers/pci/ops-cayman.c @@ -2,7 +2,7 @@ #include <linux/init.h> #include <linux/pci.h> #include <linux/types.h> -#include <asm/cpu/irq.h> +#include <cpu/irq.h> #include "pci-sh5.h" static inline u8 bridge_swizzle(u8 pin, u8 slot) diff --git a/arch/sh/drivers/pci/ops-dreamcast.c b/arch/sh/drivers/pci/ops-dreamcast.c index e1284fc69361..f5d2a2aa6f3f 100644 --- a/arch/sh/drivers/pci/ops-dreamcast.c +++ b/arch/sh/drivers/pci/ops-dreamcast.c @@ -22,10 +22,11 @@ #include <linux/init.h> #include <linux/irq.h> #include <linux/pci.h> +#include <linux/module.h> #include <asm/io.h> #include <asm/irq.h> -#include <asm/mach/pci.h> +#include <mach/pci.h> static struct resource gapspci_io_resource = { .name = "GAPSPCI IO", @@ -48,6 +49,7 @@ struct pci_channel board_pci_channels[] = { &gapspci_mem_resource, 0, 1 }, { 0, } }; +EXPORT_SYMBOL(board_pci_channels); /* * The !gapspci_config_access case really shouldn't happen, ever, unless diff --git a/arch/sh/drivers/pci/ops-se7780.c b/arch/sh/drivers/pci/ops-se7780.c index bbdb48c124a2..3145c62484d6 100644 --- a/arch/sh/drivers/pci/ops-se7780.c +++ b/arch/sh/drivers/pci/ops-se7780.c @@ -13,7 +13,7 @@ #include <linux/init.h> #include <linux/delay.h> #include <linux/pci.h> -#include <asm/se7780.h> +#include <mach-se/mach/se7780.h> #include <asm/io.h> #include "pci-sh4.h" diff --git a/arch/sh/drivers/pci/ops-sh7785lcr.c b/arch/sh/drivers/pci/ops-sh7785lcr.c new file mode 100644 index 000000000000..b3bd68702059 --- /dev/null +++ b/arch/sh/drivers/pci/ops-sh7785lcr.c @@ -0,0 +1,66 @@ +/* + * Author: Ian DaSilva (idasilva@mvista.com) + * + * Highly leveraged from pci-bigsur.c, written by Dustin McIntire. + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + * + * PCI initialization for the Renesas R0P7785LC0011RL board + * Based on arch/sh/drivers/pci/ops-r7780rp.c + * + */ +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/pci.h> +#include "pci-sh4.h" + +static char irq_tab[] __initdata = { + 65, 66, 67, 68, +}; + +int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin) +{ + return irq_tab[slot]; +} + +static struct resource sh7785_io_resource = { + .name = "SH7785_IO", + .start = SH7780_PCI_IO_BASE, + .end = SH7780_PCI_IO_BASE + SH7780_PCI_IO_SIZE - 1, + .flags = IORESOURCE_IO +}; + +static struct resource sh7785_mem_resource = { + .name = "SH7785_mem", + .start = SH7780_PCI_MEMORY_BASE, + .end = SH7780_PCI_MEMORY_BASE + SH7780_PCI_MEM_SIZE - 1, + .flags = IORESOURCE_MEM +}; + +struct pci_channel board_pci_channels[] = { + { &sh4_pci_ops, &sh7785_io_resource, &sh7785_mem_resource, 0, 0xff }, + { NULL, NULL, NULL, 0, 0 }, +}; +EXPORT_SYMBOL(board_pci_channels); + +static struct sh4_pci_address_map sh7785_pci_map = { + .window0 = { + .base = SH7780_CS2_BASE_ADDR, + .size = 0x04000000, + }, + + .window1 = { + .base = SH7780_CS3_BASE_ADDR, + .size = 0x04000000, + }, + + .flags = SH4_PCIC_NO_RESET, +}; + +int __init pcibios_init_platform(void) +{ + return sh7780_pcic_init(&sh7785_pci_map); +} diff --git a/arch/sh/drivers/pci/pci-auto.c b/arch/sh/drivers/pci/pci-auto.c index ea404704ace8..cf48b12ee58c 100644 --- a/arch/sh/drivers/pci/pci-auto.c +++ b/arch/sh/drivers/pci/pci-auto.c @@ -78,7 +78,7 @@ static struct pci_dev *fake_pci_dev(struct pci_channel *hose, } #define EARLY_PCI_OP(rw, size, type) \ -int early_##rw##_config_##size(struct pci_channel *hose, \ +static int early_##rw##_config_##size(struct pci_channel *hose, \ int top_bus, int bus, int devfn, int offset, type value) \ { \ return pci_##rw##_config_##size( \ diff --git a/arch/sh/drivers/pci/pci-sh5.c b/arch/sh/drivers/pci/pci-sh5.c index a00a4df8c02d..7a97438762c8 100644 --- a/arch/sh/drivers/pci/pci-sh5.c +++ b/arch/sh/drivers/pci/pci-sh5.c @@ -19,7 +19,7 @@ #include <linux/delay.h> #include <linux/types.h> #include <linux/irq.h> -#include <asm/cpu/irq.h> +#include <cpu/irq.h> #include <asm/pci.h> #include <asm/io.h> #include "pci-sh5.h" diff --git a/arch/sh/drivers/pci/pci.c b/arch/sh/drivers/pci/pci.c index 08d2e7325252..d3839e609aac 100644 --- a/arch/sh/drivers/pci/pci.c +++ b/arch/sh/drivers/pci/pci.c @@ -76,38 +76,6 @@ void __devinit __weak pcibios_fixup_bus(struct pci_bus *bus) pci_read_bridge_bases(bus); } -void -pcibios_update_resource(struct pci_dev *dev, struct resource *root, - struct resource *res, int resource) -{ - u32 new, check; - int reg; - - new = res->start | (res->flags & PCI_REGION_FLAG_MASK); - if (resource < 6) { - reg = PCI_BASE_ADDRESS_0 + 4*resource; - } else if (resource == PCI_ROM_RESOURCE) { - res->flags |= IORESOURCE_ROM_ENABLE; - new |= PCI_ROM_ADDRESS_ENABLE; - reg = dev->rom_base_reg; - } else { - /* - * Somebody might have asked allocation of a non-standard - * resource - */ - return; - } - - pci_write_config_dword(dev, reg, new); - pci_read_config_dword(dev, reg, &check); - if ((new ^ check) & ((new & PCI_BASE_ADDRESS_SPACE_IO) ? - PCI_BASE_ADDRESS_IO_MASK : PCI_BASE_ADDRESS_MEM_MASK)) { - printk(KERN_ERR "PCI: Error while updating region " - "%s/%d (%08x != %08x)\n", pci_name(dev), resource, - new, check); - } -} - void pcibios_align_resource(void *data, struct resource *res, resource_size_t size, resource_size_t align) __attribute__ ((weak)); @@ -167,7 +135,7 @@ int pcibios_enable_device(struct pci_dev *dev, int mask) * If we set up a device for bus mastering, we need to check and set * the latency timer as it may not be properly set. */ -unsigned int pcibios_max_latency = 255; +static unsigned int pcibios_max_latency = 255; void pcibios_set_master(struct pci_dev *dev) { diff --git a/arch/sh/include/asm/.gitignore b/arch/sh/include/asm/.gitignore new file mode 100644 index 000000000000..378db779fb6c --- /dev/null +++ b/arch/sh/include/asm/.gitignore @@ -0,0 +1 @@ +machtypes.h diff --git a/arch/sh/include/asm/Kbuild b/arch/sh/include/asm/Kbuild new file mode 100644 index 000000000000..43910cdf78a5 --- /dev/null +++ b/arch/sh/include/asm/Kbuild @@ -0,0 +1,8 @@ +include include/asm-generic/Kbuild.asm + +header-y += cpu-features.h + +unifdef-y += unistd_32.h +unifdef-y += unistd_64.h +unifdef-y += posix_types_32.h +unifdef-y += posix_types_64.h diff --git a/arch/sh/include/asm/adc.h b/arch/sh/include/asm/adc.h new file mode 100644 index 000000000000..48824c1fab80 --- /dev/null +++ b/arch/sh/include/asm/adc.h @@ -0,0 +1,13 @@ +#ifndef __ASM_ADC_H +#define __ASM_ADC_H +#ifdef __KERNEL__ +/* + * Copyright (C) 2004 Andriy Skulysh + */ + +#include <cpu/adc.h> + +int adc_single(unsigned int channel); + +#endif /* __KERNEL__ */ +#endif /* __ASM_ADC_H */ diff --git a/arch/sh/include/asm/addrspace.h b/arch/sh/include/asm/addrspace.h new file mode 100644 index 000000000000..2702d81bfc0d --- /dev/null +++ b/arch/sh/include/asm/addrspace.h @@ -0,0 +1,53 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1999 by Kaz Kojima + * + * Defitions for the address spaces of the SH CPUs. + */ +#ifndef __ASM_SH_ADDRSPACE_H +#define __ASM_SH_ADDRSPACE_H + +#ifdef __KERNEL__ + +#include <cpu/addrspace.h> + +/* If this CPU supports segmentation, hook up the helpers */ +#ifdef P1SEG + +/* + [ P0/U0 (virtual) ] 0x00000000 <------ User space + [ P1 (fixed) cached ] 0x80000000 <------ Kernel space + [ P2 (fixed) non-cachable] 0xA0000000 <------ Physical access + [ P3 (virtual) cached] 0xC0000000 <------ vmalloced area + [ P4 control ] 0xE0000000 + */ + +/* Returns the privileged segment base of a given address */ +#define PXSEG(a) (((unsigned long)(a)) & 0xe0000000) + +/* Returns the physical address of a PnSEG (n=1,2) address */ +#define PHYSADDR(a) (((unsigned long)(a)) & 0x1fffffff) + +#ifdef CONFIG_29BIT +/* + * Map an address to a certain privileged segment + */ +#define P1SEGADDR(a) \ + ((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | P1SEG)) +#define P2SEGADDR(a) \ + ((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | P2SEG)) +#define P3SEGADDR(a) \ + ((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | P3SEG)) +#define P4SEGADDR(a) \ + ((__typeof__(a))(((unsigned long)(a) & 0x1fffffff) | P4SEG)) +#endif /* 29BIT */ +#endif /* P1SEG */ + +/* Check if an address can be reached in 29 bits */ +#define IS_29BIT(a) (((unsigned long)(a)) < 0x20000000) + +#endif /* __KERNEL__ */ +#endif /* __ASM_SH_ADDRSPACE_H */ diff --git a/arch/sh/include/asm/atomic-grb.h b/arch/sh/include/asm/atomic-grb.h new file mode 100644 index 000000000000..4c5b7dbfcedb --- /dev/null +++ b/arch/sh/include/asm/atomic-grb.h @@ -0,0 +1,169 @@ +#ifndef __ASM_SH_ATOMIC_GRB_H +#define __ASM_SH_ATOMIC_GRB_H + +static inline void atomic_add(int i, atomic_t *v) +{ + int tmp; + + __asm__ __volatile__ ( + " .align 2 \n\t" + " mova 1f, r0 \n\t" /* r0 = end point */ + " mov r15, r1 \n\t" /* r1 = saved sp */ + " mov #-6, r15 \n\t" /* LOGIN: r15 = size */ + " mov.l @%1, %0 \n\t" /* load old value */ + " add %2, %0 \n\t" /* add */ + " mov.l %0, @%1 \n\t" /* store new value */ + "1: mov r1, r15 \n\t" /* LOGOUT */ + : "=&r" (tmp), + "+r" (v) + : "r" (i) + : "memory" , "r0", "r1"); +} + +static inline void atomic_sub(int i, atomic_t *v) +{ + int tmp; + + __asm__ __volatile__ ( + " .align 2 \n\t" + " mova 1f, r0 \n\t" /* r0 = end point */ + " mov r15, r1 \n\t" /* r1 = saved sp */ + " mov #-6, r15 \n\t" /* LOGIN: r15 = size */ + " mov.l @%1, %0 \n\t" /* load old value */ + " sub %2, %0 \n\t" /* sub */ + " mov.l %0, @%1 \n\t" /* store new value */ + "1: mov r1, r15 \n\t" /* LOGOUT */ + : "=&r" (tmp), + "+r" (v) + : "r" (i) + : "memory" , "r0", "r1"); +} + +static inline int atomic_add_return(int i, atomic_t *v) +{ + int tmp; + + __asm__ __volatile__ ( + " .align 2 \n\t" + " mova 1f, r0 \n\t" /* r0 = end point */ + " mov r15, r1 \n\t" /* r1 = saved sp */ + " mov #-6, r15 \n\t" /* LOGIN: r15 = size */ + " mov.l @%1, %0 \n\t" /* load old value */ + " add %2, %0 \n\t" /* add */ + " mov.l %0, @%1 \n\t" /* store new value */ + "1: mov r1, r15 \n\t" /* LOGOUT */ + : "=&r" (tmp), + "+r" (v) + : "r" (i) + : "memory" , "r0", "r1"); + + return tmp; +} + +static inline int atomic_sub_return(int i, atomic_t *v) +{ + int tmp; + + __asm__ __volatile__ ( + " .align 2 \n\t" + " mova 1f, r0 \n\t" /* r0 = end point */ + " mov r15, r1 \n\t" /* r1 = saved sp */ + " mov #-6, r15 \n\t" /* LOGIN: r15 = size */ + " mov.l @%1, %0 \n\t" /* load old value */ + " sub %2, %0 \n\t" /* sub */ + " mov.l %0, @%1 \n\t" /* store new value */ + "1: mov r1, r15 \n\t" /* LOGOUT */ + : "=&r" (tmp), + "+r" (v) + : "r" (i) + : "memory", "r0", "r1"); + + return tmp; +} + +static inline void atomic_clear_mask(unsigned int mask, atomic_t *v) +{ + int tmp; + unsigned int _mask = ~mask; + + __asm__ __volatile__ ( + " .align 2 \n\t" + " mova 1f, r0 \n\t" /* r0 = end point */ + " mov r15, r1 \n\t" /* r1 = saved sp */ + " mov #-6, r15 \n\t" /* LOGIN: r15 = size */ + " mov.l @%1, %0 \n\t" /* load old value */ + " and %2, %0 \n\t" /* add */ + " mov.l %0, @%1 \n\t" /* store new value */ + "1: mov r1, r15 \n\t" /* LOGOUT */ + : "=&r" (tmp), + "+r" (v) + : "r" (_mask) + : "memory" , "r0", "r1"); +} + +static inline void atomic_set_mask(unsigned int mask, atomic_t *v) +{ + int tmp; + + __asm__ __volatile__ ( + " .align 2 \n\t" + " mova 1f, r0 \n\t" /* r0 = end point */ + " mov r15, r1 \n\t" /* r1 = saved sp */ + " mov #-6, r15 \n\t" /* LOGIN: r15 = size */ + " mov.l @%1, %0 \n\t" /* load old value */ + " or %2, %0 \n\t" /* or */ + " mov.l %0, @%1 \n\t" /* store new value */ + "1: mov r1, r15 \n\t" /* LOGOUT */ + : "=&r" (tmp), + "+r" (v) + : "r" (mask) + : "memory" , "r0", "r1"); +} + +static inline int atomic_cmpxchg(atomic_t *v, int old, int new) +{ + int ret; + + __asm__ __volatile__ ( + " .align 2 \n\t" + " mova 1f, r0 \n\t" + " nop \n\t" + " mov r15, r1 \n\t" + " mov #-8, r15 \n\t" + " mov.l @%1, %0 \n\t" + " cmp/eq %2, %0 \n\t" + " bf 1f \n\t" + " mov.l %3, @%1 \n\t" + "1: mov r1, r15 \n\t" + : "=&r" (ret) + : "r" (v), "r" (old), "r" (new) + : "memory" , "r0", "r1" , "t"); + + return ret; +} + +static inline int atomic_add_unless(atomic_t *v, int a, int u) +{ + int ret; + unsigned long tmp; + + __asm__ __volatile__ ( + " .align 2 \n\t" + " mova 1f, r0 \n\t" + " nop \n\t" + " mov r15, r1 \n\t" + " mov #-12, r15 \n\t" + " mov.l @%2, %1 \n\t" + " mov %1, %0 \n\t" + " cmp/eq %4, %0 \n\t" + " bt/s 1f \n\t" + " add %3, %1 \n\t" + " mov.l %1, @%2 \n\t" + "1: mov r1, r15 \n\t" + : "=&r" (ret), "=&r" (tmp) + : "r" (v), "r" (a), "r" (u) + : "memory" , "r0", "r1" , "t"); + + return ret != u; +} +#endif /* __ASM_SH_ATOMIC_GRB_H */ diff --git a/arch/sh/include/asm/atomic-irq.h b/arch/sh/include/asm/atomic-irq.h new file mode 100644 index 000000000000..74f7943cff6f --- /dev/null +++ b/arch/sh/include/asm/atomic-irq.h @@ -0,0 +1,71 @@ +#ifndef __ASM_SH_ATOMIC_IRQ_H +#define __ASM_SH_ATOMIC_IRQ_H + +/* + * To get proper branch prediction for the main line, we must branch + * forward to code at the end of this object's .text section, then + * branch back to restart the operation. + */ +static inline void atomic_add(int i, atomic_t *v) +{ + unsigned long flags; + + local_irq_save(flags); + *(long *)v += i; + local_irq_restore(flags); +} + +static inline void atomic_sub(int i, atomic_t *v) +{ + unsigned long flags; + + local_irq_save(flags); + *(long *)v -= i; + local_irq_restore(flags); +} + +static inline int atomic_add_return(int i, atomic_t *v) +{ + unsigned long temp, flags; + + local_irq_save(flags); + temp = *(long *)v; + temp += i; + *(long *)v = temp; + local_irq_restore(flags); + + return temp; +} + +static inline int atomic_sub_return(int i, atomic_t *v) +{ + unsigned long temp, flags; + + local_irq_save(flags); + temp = *(long *)v; + temp -= i; + *(long *)v = temp; + local_irq_restore(flags); + + return temp; +} + +static inline void atomic_clear_mask(unsigned int mask, atomic_t *v) +{ + unsigned long flags; + + local_irq_save(flags); + *(long *)v &= ~mask; + local_irq_restore(flags); +} + +static inline void atomic_set_mask(unsigned int mask, atomic_t *v) +{ + unsigned long flags; + + local_irq_save(flags); + *(long *)v |= mask; + local_irq_restore(flags); +} + +#endif /* __ASM_SH_ATOMIC_IRQ_H */ diff --git a/arch/sh/include/asm/atomic-llsc.h b/arch/sh/include/asm/atomic-llsc.h new file mode 100644 index 000000000000..4b00b78e3f4f --- /dev/null +++ b/arch/sh/include/asm/atomic-llsc.h @@ -0,0 +1,107 @@ +#ifndef __ASM_SH_ATOMIC_LLSC_H +#define __ASM_SH_ATOMIC_LLSC_H + +/* + * To get proper branch prediction for the main line, we must branch + * forward to code at the end of this object's .text section, then + * branch back to restart the operation. + */ +static inline void atomic_add(int i, atomic_t *v) +{ + unsigned long tmp; + + __asm__ __volatile__ ( +"1: movli.l @%2, %0 ! atomic_add \n" +" add %1, %0 \n" +" movco.l %0, @%2 \n" +" bf 1b \n" + : "=&z" (tmp) + : "r" (i), "r" (&v->counter) + : "t"); +} + +static inline void atomic_sub(int i, atomic_t *v) +{ + unsigned long tmp; + + __asm__ __volatile__ ( +"1: movli.l @%2, %0 ! atomic_sub \n" +" sub %1, %0 \n" +" movco.l %0, @%2 \n" +" bf 1b \n" + : "=&z" (tmp) + : "r" (i), "r" (&v->counter) + : "t"); +} + +/* + * SH-4A note: + * + * We basically get atomic_xxx_return() for free compared with + * atomic_xxx(). movli.l/movco.l require r0 due to the instruction + * encoding, so the retval is automatically set without having to + * do any special work. + */ +static inline int atomic_add_return(int i, atomic_t *v) +{ + unsigned long temp; + + __asm__ __volatile__ ( +"1: movli.l @%2, %0 ! atomic_add_return \n" +" add %1, %0 \n" +" movco.l %0, @%2 \n" +" bf 1b \n" +" synco \n" + : "=&z" (temp) + : "r" (i), "r" (&v->counter) + : "t"); + + return temp; +} + +static inline int atomic_sub_return(int i, atomic_t *v) +{ + unsigned long temp; + + __asm__ __volatile__ ( +"1: movli.l @%2, %0 ! atomic_sub_return \n" +" sub %1, %0 \n" +" movco.l %0, @%2 \n" +" bf 1b \n" +" synco \n" + : "=&z" (temp) + : "r" (i), "r" (&v->counter) + : "t"); + + return temp; +} + +static inline void atomic_clear_mask(unsigned int mask, atomic_t *v) +{ + unsigned long tmp; + + __asm__ __volatile__ ( +"1: movli.l @%2, %0 ! atomic_clear_mask \n" +" and %1, %0 \n" +" movco.l %0, @%2 \n" +" bf 1b \n" + : "=&z" (tmp) + : "r" (~mask), "r" (&v->counter) + : "t"); +} + +static inline void atomic_set_mask(unsigned int mask, atomic_t *v) +{ + unsigned long tmp; + + __asm__ __volatile__ ( +"1: movli.l @%2, %0 ! atomic_set_mask \n" +" or %1, %0 \n" +" movco.l %0, @%2 \n" +" bf 1b \n" + : "=&z" (tmp) + : "r" (mask), "r" (&v->counter) + : "t"); +} + +#endif /* __ASM_SH_ATOMIC_LLSC_H */ diff --git a/arch/sh/include/asm/atomic.h b/arch/sh/include/asm/atomic.h new file mode 100644 index 000000000000..c043ef003028 --- /dev/null +++ b/arch/sh/include/asm/atomic.h @@ -0,0 +1,89 @@ +#ifndef __ASM_SH_ATOMIC_H +#define __ASM_SH_ATOMIC_H + +/* + * Atomic operations that C can't guarantee us. Useful for + * resource counting etc.. + * + */ + +typedef struct { volatile int counter; } atomic_t; + +#define ATOMIC_INIT(i) ( (atomic_t) { (i) } ) + +#define atomic_read(v) ((v)->counter) +#define atomic_set(v,i) ((v)->counter = (i)) + +#include <linux/compiler.h> +#include <asm/system.h> + +#if defined(CONFIG_GUSA_RB) +#include <asm/atomic-grb.h> +#elif defined(CONFIG_CPU_SH4A) +#include <asm/atomic-llsc.h> +#else +#include <asm/atomic-irq.h> +#endif + +#define atomic_add_negative(a, v) (atomic_add_return((a), (v)) < 0) + +#define atomic_dec_return(v) atomic_sub_return(1,(v)) +#define atomic_inc_return(v) atomic_add_return(1,(v)) + +/* + * atomic_inc_and_test - increment and test + * @v: pointer of type atomic_t + * + * Atomically increments @v by 1 + * and returns true if the result is zero, or false for all + * other cases. + */ +#define atomic_inc_and_test(v) (atomic_inc_return(v) == 0) + +#define atomic_sub_and_test(i,v) (atomic_sub_return((i), (v)) == 0) +#define atomic_dec_and_test(v) (atomic_sub_return(1, (v)) == 0) + +#define atomic_inc(v) atomic_add(1,(v)) +#define atomic_dec(v) atomic_sub(1,(v)) + +#ifndef CONFIG_GUSA_RB +static inline int atomic_cmpxchg(atomic_t *v, int old, int new) +{ + int ret; + unsigned long flags; + + local_irq_save(flags); + ret = v->counter; + if (likely(ret == old)) + v->counter = new; + local_irq_restore(flags); + + return ret; +} + +static inline int atomic_add_unless(atomic_t *v, int a, int u) +{ + int ret; + unsigned long flags; + + local_irq_save(flags); + ret = v->counter; + if (ret != u) + v->counter += a; + local_irq_restore(flags); + + return ret != u; +} +#endif + +#define atomic_xchg(v, new) (xchg(&((v)->counter), new)) +#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0) + +/* Atomic operations are already serializing on SH */ +#define smp_mb__before_atomic_dec() barrier() +#define smp_mb__after_atomic_dec() barrier() +#define smp_mb__before_atomic_inc() barrier() +#define smp_mb__after_atomic_inc() barrier() + +#include <asm-generic/atomic.h> +#endif /* __ASM_SH_ATOMIC_H */ diff --git a/arch/sh/include/asm/auxvec.h b/arch/sh/include/asm/auxvec.h new file mode 100644 index 000000000000..483effd65e00 --- /dev/null +++ b/arch/sh/include/asm/auxvec.h @@ -0,0 +1,36 @@ +#ifndef __ASM_SH_AUXVEC_H +#define __ASM_SH_AUXVEC_H + +/* + * Architecture-neutral AT_ values in 0-17, leave some room + * for more of them. + */ + +/* + * This entry gives some information about the FPU initialization + * performed by the kernel. + */ +#define AT_FPUCW 18 /* Used FPU control word. */ + +#if defined(CONFIG_VSYSCALL) || !defined(__KERNEL__) +/* + * Only define this in the vsyscall case, the entry point to + * the vsyscall page gets placed here. The kernel will attempt + * to build a gate VMA we don't care about otherwise.. + */ +#define AT_SYSINFO_EHDR 33 +#endif + +/* + * More complete cache descriptions than AT_[DIU]CACHEBSIZE. If the + * value is -1, then the cache doesn't exist. Otherwise: + * + * bit 0-3: Cache set-associativity; 0 means fully associative. + * bit 4-7: Log2 of cacheline size. + * bit 8-31: Size of the entire cache >> 8. + */ +#define AT_L1I_CACHESHAPE 34 +#define AT_L1D_CACHESHAPE 35 +#define AT_L2_CACHESHAPE 36 + +#endif /* __ASM_SH_AUXVEC_H */ diff --git a/arch/sh/include/asm/bitops-grb.h b/arch/sh/include/asm/bitops-grb.h new file mode 100644 index 000000000000..a5907b94395b --- /dev/null +++ b/arch/sh/include/asm/bitops-grb.h @@ -0,0 +1,169 @@ +#ifndef __ASM_SH_BITOPS_GRB_H +#define __ASM_SH_BITOPS_GRB_H + +static inline void set_bit(int nr, volatile void * addr) +{ + int mask; + volatile unsigned int *a = addr; + unsigned long tmp; + + a += nr >> 5; + mask = 1 << (nr & 0x1f); + + __asm__ __volatile__ ( + " .align 2 \n\t" + " mova 1f, r0 \n\t" /* r0 = end point */ + " mov r15, r1 \n\t" /* r1 = saved sp */ + " mov #-6, r15 \n\t" /* LOGIN: r15 = size */ + " mov.l @%1, %0 \n\t" /* load old value */ + " or %2, %0 \n\t" /* or */ + " mov.l %0, @%1 \n\t" /* store new value */ + "1: mov r1, r15 \n\t" /* LOGOUT */ + : "=&r" (tmp), + "+r" (a) + : "r" (mask) + : "memory" , "r0", "r1"); +} + +static inline void clear_bit(int nr, volatile void * addr) +{ + int mask; + volatile unsigned int *a = addr; + unsigned long tmp; + + a += nr >> 5; + mask = ~(1 << (nr & 0x1f)); + __asm__ __volatile__ ( + " .align 2 \n\t" + " mova 1f, r0 \n\t" /* r0 = end point */ + " mov r15, r1 \n\t" /* r1 = saved sp */ + " mov #-6, r15 \n\t" /* LOGIN: r15 = size */ + " mov.l @%1, %0 \n\t" /* load old value */ + " and %2, %0 \n\t" /* and */ + " mov.l %0, @%1 \n\t" /* store new value */ + "1: mov r1, r15 \n\t" /* LOGOUT */ + : "=&r" (tmp), + "+r" (a) + : "r" (mask) + : "memory" , "r0", "r1"); +} + +static inline void change_bit(int nr, volatile void * addr) +{ + int mask; + volatile unsigned int *a = addr; + unsigned long tmp; + + a += nr >> 5; + mask = 1 << (nr & 0x1f); + __asm__ __volatile__ ( + " .align 2 \n\t" + " mova 1f, r0 \n\t" /* r0 = end point */ + " mov r15, r1 \n\t" /* r1 = saved sp */ + " mov #-6, r15 \n\t" /* LOGIN: r15 = size */ + " mov.l @%1, %0 \n\t" /* load old value */ + " xor %2, %0 \n\t" /* xor */ + " mov.l %0, @%1 \n\t" /* store new value */ + "1: mov r1, r15 \n\t" /* LOGOUT */ + : "=&r" (tmp), + "+r" (a) + : "r" (mask) + : "memory" , "r0", "r1"); +} + +static inline int test_and_set_bit(int nr, volatile void * addr) +{ + int mask, retval; + volatile unsigned int *a = addr; + unsigned long tmp; + + a += nr >> 5; + mask = 1 << (nr & 0x1f); + + __asm__ __volatile__ ( + " .align 2 \n\t" + " mova 1f, r0 \n\t" /* r0 = end point */ + " mov r15, r1 \n\t" /* r1 = saved sp */ + " mov #-14, r15 \n\t" /* LOGIN: r15 = size */ + " mov.l @%2, %0 \n\t" /* load old value */ + " mov %0, %1 \n\t" + " tst %1, %3 \n\t" /* T = ((*a & mask) == 0) */ + " mov #-1, %1 \n\t" /* retvat = -1 */ + " negc %1, %1 \n\t" /* retval = (mask & *a) != 0 */ + " or %3, %0 \n\t" + " mov.l %0, @%2 \n\t" /* store new value */ + "1: mov r1, r15 \n\t" /* LOGOUT */ + : "=&r" (tmp), + "=&r" (retval), + "+r" (a) + : "r" (mask) + : "memory" , "r0", "r1" ,"t"); + + return retval; +} + +static inline int test_and_clear_bit(int nr, volatile void * addr) +{ + int mask, retval,not_mask; + volatile unsigned int *a = addr; + unsigned long tmp; + + a += nr >> 5; + mask = 1 << (nr & 0x1f); + + not_mask = ~mask; + + __asm__ __volatile__ ( + " .align 2 \n\t" + " mova 1f, r0 \n\t" /* r0 = end point */ + " mov r15, r1 \n\t" /* r1 = saved sp */ + " mov #-14, r15 \n\t" /* LOGIN */ + " mov.l @%2, %0 \n\t" /* load old value */ + " mov %0, %1 \n\t" /* %1 = *a */ + " tst %1, %3 \n\t" /* T = ((*a & mask) == 0) */ + " mov #-1, %1 \n\t" /* retvat = -1 */ + " negc %1, %1 \n\t" /* retval = (mask & *a) != 0 */ + " and %4, %0 \n\t" + " mov.l %0, @%2 \n\t" /* store new value */ + "1: mov r1, r15 \n\t" /* LOGOUT */ + : "=&r" (tmp), + "=&r" (retval), + "+r" (a) + : "r" (mask), + "r" (not_mask) + : "memory" , "r0", "r1", "t"); + + return retval; +} + +static inline int test_and_change_bit(int nr, volatile void * addr) +{ + int mask, retval; + volatile unsigned int *a = addr; + unsigned long tmp; + + a += nr >> 5; + mask = 1 << (nr & 0x1f); + + __asm__ __volatile__ ( + " .align 2 \n\t" + " mova 1f, r0 \n\t" /* r0 = end point */ + " mov r15, r1 \n\t" /* r1 = saved sp */ + " mov #-14, r15 \n\t" /* LOGIN */ + " mov.l @%2, %0 \n\t" /* load old value */ + " mov %0, %1 \n\t" /* %1 = *a */ + " tst %1, %3 \n\t" /* T = ((*a & mask) == 0) */ + " mov #-1, %1 \n\t" /* retvat = -1 */ + " negc %1, %1 \n\t" /* retval = (mask & *a) != 0 */ + " xor %3, %0 \n\t" + " mov.l %0, @%2 \n\t" /* store new value */ + "1: mov r1, r15 \n\t" /* LOGOUT */ + : "=&r" (tmp), + "=&r" (retval), + "+r" (a) + : "r" (mask) + : "memory" , "r0", "r1", "t"); + + return retval; +} +#endif /* __ASM_SH_BITOPS_GRB_H */ diff --git a/arch/sh/include/asm/bitops-irq.h b/arch/sh/include/asm/bitops-irq.h new file mode 100644 index 000000000000..653a12750584 --- /dev/null +++ b/arch/sh/include/asm/bitops-irq.h @@ -0,0 +1,91 @@ +#ifndef __ASM_SH_BITOPS_IRQ_H +#define __ASM_SH_BITOPS_IRQ_H + +static inline void set_bit(int nr, volatile void *addr) +{ + int mask; + volatile unsigned int *a = addr; + unsigned long flags; + + a += nr >> 5; + mask = 1 << (nr & 0x1f); + local_irq_save(flags); + *a |= mask; + local_irq_restore(flags); +} + +static inline void clear_bit(int nr, volatile void *addr) +{ + int mask; + volatile unsigned int *a = addr; + unsigned long flags; + + a += nr >> 5; + mask = 1 << (nr & 0x1f); + local_irq_save(flags); + *a &= ~mask; + local_irq_restore(flags); +} + +static inline void change_bit(int nr, volatile void *addr) +{ + int mask; + volatile unsigned int *a = addr; + unsigned long flags; + + a += nr >> 5; + mask = 1 << (nr & 0x1f); + local_irq_save(flags); + *a ^= mask; + local_irq_restore(flags); +} + +static inline int test_and_set_bit(int nr, volatile void *addr) +{ + int mask, retval; + volatile unsigned int *a = addr; + unsigned long flags; + + a += nr >> 5; + mask = 1 << (nr & 0x1f); + local_irq_save(flags); + retval = (mask & *a) != 0; + *a |= mask; + local_irq_restore(flags); + + return retval; +} + +static inline int test_and_clear_bit(int nr, volatile void *addr) +{ + int mask, retval; + volatile unsigned int *a = addr; + unsigned long flags; + + a += nr >> 5; + mask = 1 << (nr & 0x1f); + local_irq_save(flags); + retval = (mask & *a) != 0; + *a &= ~mask; + local_irq_restore(flags); + + return retval; +} + +static inline int test_and_change_bit(int nr, volatile void *addr) +{ + int mask, retval; + volatile unsigned int *a = addr; + unsigned long flags; + + a += nr >> 5; + mask = 1 << (nr & 0x1f); + local_irq_save(flags); + retval = (mask & *a) != 0; + *a ^= mask; + local_irq_restore(flags); + + return retval; +} + +#endif /* __ASM_SH_BITOPS_IRQ_H */ diff --git a/arch/sh/include/asm/bitops.h b/arch/sh/include/asm/bitops.h new file mode 100644 index 000000000000..d7d382f63ee5 --- /dev/null +++ b/arch/sh/include/asm/bitops.h @@ -0,0 +1,103 @@ +#ifndef __ASM_SH_BITOPS_H +#define __ASM_SH_BITOPS_H + +#ifdef __KERNEL__ + +#ifndef _LINUX_BITOPS_H +#error only <linux/bitops.h> can be included directly +#endif + +#include <asm/system.h> +/* For __swab32 */ +#include <asm/byteorder.h> + +#ifdef CONFIG_GUSA_RB +#include <asm/bitops-grb.h> +#else +#include <asm/bitops-irq.h> +#endif + + +/* + * clear_bit() doesn't provide any barrier for the compiler. + */ +#define smp_mb__before_clear_bit() barrier() +#define smp_mb__after_clear_bit() barrier() + +#include <asm-generic/bitops/non-atomic.h> + +#ifdef CONFIG_SUPERH32 +static inline unsigned long ffz(unsigned long word) +{ + unsigned long result; + + __asm__("1:\n\t" + "shlr %1\n\t" + "bt/s 1b\n\t" + " add #1, %0" + : "=r" (result), "=r" (word) + : "0" (~0L), "1" (word) + : "t"); + return result; +} + +/** + * __ffs - find first bit in word. + * @word: The word to search + * + * Undefined if no bit exists, so code should check against 0 first. + */ +static inline unsigned long __ffs(unsigned long word) +{ + unsigned long result; + + __asm__("1:\n\t" + "shlr %1\n\t" + "bf/s 1b\n\t" + " add #1, %0" + : "=r" (result), "=r" (word) + : "0" (~0L), "1" (word) + : "t"); + return result; +} +#else +static inline unsigned long ffz(unsigned long word) +{ + unsigned long result, __d2, __d3; + + __asm__("gettr tr0, %2\n\t" + "pta $+32, tr0\n\t" + "andi %1, 1, %3\n\t" + "beq %3, r63, tr0\n\t" + "pta $+4, tr0\n" + "0:\n\t" + "shlri.l %1, 1, %1\n\t" + "addi %0, 1, %0\n\t" + "andi %1, 1, %3\n\t" + "beqi %3, 1, tr0\n" + "1:\n\t" + "ptabs %2, tr0\n\t" + : "=r" (result), "=r" (word), "=r" (__d2), "=r" (__d3) + : "0" (0L), "1" (word)); + + return result; +} + +#include <asm-generic/bitops/__ffs.h> +#endif + +#include <asm-generic/bitops/find.h> +#include <asm-generic/bitops/ffs.h> +#include <asm-generic/bitops/hweight.h> +#include <asm-generic/bitops/lock.h> +#include <asm-generic/bitops/sched.h> +#include <asm-generic/bitops/ext2-non-atomic.h> +#include <asm-generic/bitops/ext2-atomic.h> +#include <asm-generic/bitops/minix.h> +#include <asm-generic/bitops/fls.h> +#include <asm-generic/bitops/__fls.h> +#include <asm-generic/bitops/fls64.h> + +#endif /* __KERNEL__ */ + +#endif /* __ASM_SH_BITOPS_H */ diff --git a/arch/sh/include/asm/bug.h b/arch/sh/include/asm/bug.h new file mode 100644 index 000000000000..c01718040166 --- /dev/null +++ b/arch/sh/include/asm/bug.h @@ -0,0 +1,79 @@ +#ifndef __ASM_SH_BUG_H +#define __ASM_SH_BUG_H + +#define TRAPA_BUG_OPCODE 0xc33e /* trapa #0x3e */ + +#ifdef CONFIG_GENERIC_BUG +#define HAVE_ARCH_BUG +#define HAVE_ARCH_WARN_ON + +/** + * _EMIT_BUG_ENTRY + * %1 - __FILE__ + * %2 - __LINE__ + * %3 - trap type + * %4 - sizeof(struct bug_entry) + * + * The trapa opcode itself sits in %0. + * The %O notation is used to avoid # generation. + * + * The offending file and line are encoded in the __bug_table section. + */ +#ifdef CONFIG_DEBUG_BUGVERBOSE +#define _EMIT_BUG_ENTRY \ + "\t.pushsection __bug_table,\"a\"\n" \ + "2:\t.long 1b, %O1\n" \ + "\t.short %O2, %O3\n" \ + "\t.org 2b+%O4\n" \ + "\t.popsection\n" +#else +#define _EMIT_BUG_ENTRY \ + "\t.pushsection __bug_table,\"a\"\n" \ + "2:\t.long 1b\n" \ + "\t.short %O3\n" \ + "\t.org 2b+%O4\n" \ + "\t.popsection\n" +#endif + +#define BUG() \ +do { \ + __asm__ __volatile__ ( \ + "1:\t.short %O0\n" \ + _EMIT_BUG_ENTRY \ + : \ + : "n" (TRAPA_BUG_OPCODE), \ + "i" (__FILE__), \ + "i" (__LINE__), "i" (0), \ + "i" (sizeof(struct bug_entry))); \ +} while (0) + +#define __WARN() \ +do { \ + __asm__ __volatile__ ( \ + "1:\t.short %O0\n" \ + _EMIT_BUG_ENTRY \ + : \ + : "n" (TRAPA_BUG_OPCODE), \ + "i" (__FILE__), \ + "i" (__LINE__), \ + "i" (BUGFLAG_WARNING), \ + "i" (sizeof(struct bug_entry))); \ +} while (0) + +#define WARN_ON(x) ({ \ + int __ret_warn_on = !!(x); \ + if (__builtin_constant_p(__ret_warn_on)) { \ + if (__ret_warn_on) \ + __WARN(); \ + } else { \ + if (unlikely(__ret_warn_on)) \ + __WARN(); \ + } \ + unlikely(__ret_warn_on); \ +}) + +#endif /* CONFIG_GENERIC_BUG */ + +#include <asm-generic/bug.h> + +#endif /* __ASM_SH_BUG_H */ diff --git a/arch/sh/include/asm/bugs.h b/arch/sh/include/asm/bugs.h new file mode 100644 index 000000000000..121b2ecddfc3 --- /dev/null +++ b/arch/sh/include/asm/bugs.h @@ -0,0 +1,73 @@ +#ifndef __ASM_SH_BUGS_H +#define __ASM_SH_BUGS_H + +/* + * This is included by init/main.c to check for architecture-dependent bugs. + * + * Needs: + * void check_bugs(void); + */ + +/* + * I don't know of any Super-H bugs yet. + */ + +#include <asm/processor.h> + +static void __init check_bugs(void) +{ + extern unsigned long loops_per_jiffy; + char *p = &init_utsname()->machine[2]; /* "sh" */ + + current_cpu_data.loops_per_jiffy = loops_per_jiffy; + + switch (current_cpu_data.type) { + case CPU_SH7619: + *p++ = '2'; + break; + case CPU_SH7203 ... CPU_MXG: + *p++ = '2'; + *p++ = 'a'; + break; + case CPU_SH7705 ... CPU_SH7729: + *p++ = '3'; + break; + case CPU_SH7750 ... CPU_SH4_501: + *p++ = '4'; + break; + case CPU_SH7763 ... CPU_SHX3: + *p++ = '4'; + *p++ = 'a'; + break; + case CPU_SH7343 ... CPU_SH7366: + *p++ = '4'; + *p++ = 'a'; + *p++ = 'l'; + *p++ = '-'; + *p++ = 'd'; + *p++ = 's'; + *p++ = 'p'; + break; + case CPU_SH5_101 ... CPU_SH5_103: + *p++ = '6'; + *p++ = '4'; + break; + case CPU_SH_NONE: + /* + * Specifically use CPU_SH_NONE rather than default:, + * so we're able to have the compiler whine about + * unhandled enumerations. + */ + break; + } + + printk("CPU: %s\n", get_cpu_subtype(¤t_cpu_data)); + +#ifndef __LITTLE_ENDIAN__ + /* 'eb' means 'Endian Big' */ + *p++ = 'e'; + *p++ = 'b'; +#endif + *p = '\0'; +} +#endif /* __ASM_SH_BUGS_H */ diff --git a/arch/sh/include/asm/byteorder.h b/arch/sh/include/asm/byteorder.h new file mode 100644 index 000000000000..4c13e6117563 --- /dev/null +++ b/arch/sh/include/asm/byteorder.h @@ -0,0 +1,70 @@ +#ifndef __ASM_SH_BYTEORDER_H +#define __ASM_SH_BYTEORDER_H + +/* + * Copyright (C) 1999 Niibe Yutaka + * Copyright (C) 2000, 2001 Paolo Alberelli + */ +#include <linux/compiler.h> +#include <linux/types.h> + +static inline __attribute_const__ __u32 ___arch__swab32(__u32 x) +{ + __asm__( +#ifdef __SH5__ + "byterev %0, %0\n\t" + "shari %0, 32, %0" +#else + "swap.b %0, %0\n\t" + "swap.w %0, %0\n\t" + "swap.b %0, %0" +#endif + : "=r" (x) + : "0" (x)); + + return x; +} + +static inline __attribute_const__ __u16 ___arch__swab16(__u16 x) +{ + __asm__( +#ifdef __SH5__ + "byterev %0, %0\n\t" + "shari %0, 32, %0" +#else + "swap.b %0, %0" +#endif + : "=r" (x) + : "0" (x)); + + return x; +} + +static inline __u64 ___arch__swab64(__u64 val) +{ + union { + struct { __u32 a,b; } s; + __u64 u; + } v, w; + v.u = val; + w.s.b = ___arch__swab32(v.s.a); + w.s.a = ___arch__swab32(v.s.b); + return w.u; +} + +#define __arch__swab64(x) ___arch__swab64(x) +#define __arch__swab32(x) ___arch__swab32(x) +#define __arch__swab16(x) ___arch__swab16(x) + +#if !defined(__STRICT_ANSI__) || defined(__KERNEL__) +# define __BYTEORDER_HAS_U64__ +# define __SWAB_64_THRU_32__ +#endif + +#ifdef __LITTLE_ENDIAN__ +#include <linux/byteorder/little_endian.h> +#else +#include <linux/byteorder/big_endian.h> +#endif + +#endif /* __ASM_SH_BYTEORDER_H */ diff --git a/arch/sh/include/asm/cache.h b/arch/sh/include/asm/cache.h new file mode 100644 index 000000000000..02df18ea9608 --- /dev/null +++ b/arch/sh/include/asm/cache.h @@ -0,0 +1,51 @@ +/* $Id: cache.h,v 1.6 2004/03/11 18:08:05 lethal Exp $ + * + * include/asm-sh/cache.h + * + * Copyright 1999 (C) Niibe Yutaka + * Copyright 2002, 2003 (C) Paul Mundt + */ +#ifndef __ASM_SH_CACHE_H +#define __ASM_SH_CACHE_H +#ifdef __KERNEL__ + +#include <linux/init.h> +#include <cpu/cache.h> + +#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT) + +#define __read_mostly __attribute__((__section__(".data.read_mostly"))) + +#ifndef __ASSEMBLY__ +struct cache_info { + unsigned int ways; /* Number of cache ways */ + unsigned int sets; /* Number of cache sets */ + unsigned int linesz; /* Cache line size (bytes) */ + + unsigned int way_size; /* sets * line size */ + + /* + * way_incr is the address offset for accessing the next way + * in memory mapped cache array ops. + */ + unsigned int way_incr; + unsigned int entry_shift; + unsigned int entry_mask; + + /* + * Compute a mask which selects the address bits which overlap between + * 1. those used to select the cache set during indexing + * 2. those in the physical page number. + */ + unsigned int alias_mask; + + unsigned int n_aliases; /* Number of aliases */ + + unsigned long flags; +}; + +int __init detect_cpu_and_cache_system(void); + +#endif /* __ASSEMBLY__ */ +#endif /* __KERNEL__ */ +#endif /* __ASM_SH_CACHE_H */ diff --git a/arch/sh/include/asm/cacheflush.h b/arch/sh/include/asm/cacheflush.h new file mode 100644 index 000000000000..09acbc32d6c7 --- /dev/null +++ b/arch/sh/include/asm/cacheflush.h @@ -0,0 +1,81 @@ +#ifndef __ASM_SH_CACHEFLUSH_H +#define __ASM_SH_CACHEFLUSH_H + +#ifdef __KERNEL__ + +#ifdef CONFIG_CACHE_OFF +/* + * Nothing to do when the cache is disabled, initial flush and explicit + * disabling is handled at CPU init time. + * + * See arch/sh/kernel/cpu/init.c:cache_init(). + */ +#define p3_cache_init() do { } while (0) +#define flush_cache_all() do { } while (0) +#define flush_cache_mm(mm) do { } while (0) +#define flush_cache_dup_mm(mm) do { } while (0) +#define flush_cache_range(vma, start, end) do { } while (0) +#define flush_cache_page(vma, vmaddr, pfn) do { } while (0) +#define flush_dcache_page(page) do { } while (0) +#define flush_icache_range(start, end) do { } while (0) +#define flush_icache_page(vma,pg) do { } while (0) +#define flush_dcache_mmap_lock(mapping) do { } while (0) +#define flush_dcache_mmap_unlock(mapping) do { } while (0) +#define flush_cache_sigtramp(vaddr) do { } while (0) +#define flush_icache_user_range(vma,pg,adr,len) do { } while (0) +#define __flush_wback_region(start, size) do { (void)(start); } while (0) +#define __flush_purge_region(start, size) do { (void)(start); } while (0) +#define __flush_invalidate_region(start, size) do { (void)(start); } while (0) +#else +#include <cpu/cacheflush.h> + +/* + * Consistent DMA requires that the __flush_xxx() primitives must be set + * for any of the enabled non-coherent caches (most of the UP CPUs), + * regardless of PIPT or VIPT cache configurations. + */ + +/* Flush (write-back only) a region (smaller than a page) */ +extern void __flush_wback_region(void *start, int size); +/* Flush (write-back & invalidate) a region (smaller than a page) */ +extern void __flush_purge_region(void *start, int size); +/* Flush (invalidate only) a region (smaller than a page) */ +extern void __flush_invalidate_region(void *start, int size); +#endif + +#define ARCH_HAS_FLUSH_KERNEL_DCACHE_PAGE +static inline void flush_kernel_dcache_page(struct page *page) +{ + flush_dcache_page(page); +} + +#if defined(CONFIG_CPU_SH4) && !defined(CONFIG_CACHE_OFF) +extern void copy_to_user_page(struct vm_area_struct *vma, + struct page *page, unsigned long vaddr, void *dst, const void *src, + unsigned long len); + +extern void copy_from_user_page(struct vm_area_struct *vma, + struct page *page, unsigned long vaddr, void *dst, const void *src, + unsigned long len); +#else +#define copy_to_user_page(vma, page, vaddr, dst, src, len) \ + do { \ + flush_cache_page(vma, vaddr, page_to_pfn(page));\ + memcpy(dst, src, len); \ + flush_icache_user_range(vma, page, vaddr, len); \ + } while (0) + +#define copy_from_user_page(vma, page, vaddr, dst, src, len) \ + do { \ + flush_cache_page(vma, vaddr, page_to_pfn(page));\ + memcpy(dst, src, len); \ + } while (0) +#endif + +#define flush_cache_vmap(start, end) flush_cache_all() +#define flush_cache_vunmap(start, end) flush_cache_all() + +#define HAVE_ARCH_UNMAPPED_AREA + +#endif /* __KERNEL__ */ +#endif /* __ASM_SH_CACHEFLUSH_H */ diff --git a/arch/sh/include/asm/checksum.h b/arch/sh/include/asm/checksum.h new file mode 100644 index 000000000000..67496ab0ef04 --- /dev/null +++ b/arch/sh/include/asm/checksum.h @@ -0,0 +1,5 @@ +#ifdef CONFIG_SUPERH32 +# include "checksum_32.h" +#else +# include "checksum_64.h" +#endif diff --git a/arch/sh/include/asm/checksum_32.h b/arch/sh/include/asm/checksum_32.h new file mode 100644 index 000000000000..14b7ac2f0a07 --- /dev/null +++ b/arch/sh/include/asm/checksum_32.h @@ -0,0 +1,215 @@ +#ifndef __ASM_SH_CHECKSUM_H +#define __ASM_SH_CHECKSUM_H + +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1999 by Kaz Kojima & Niibe Yutaka + */ + +#include <linux/in6.h> + +/* + * computes the checksum of a memory block at buff, length len, + * and adds in "sum" (32-bit) + * + * returns a 32-bit number suitable for feeding into itself + * or csum_tcpudp_magic + * + * this function must be called with even lengths, except + * for the last fragment, which may be odd + * + * it's best to have buff aligned on a 32-bit boundary + */ +asmlinkage __wsum csum_partial(const void *buff, int len, __wsum sum); + +/* + * the same as csum_partial, but copies from src while it + * checksums, and handles user-space pointer exceptions correctly, when needed. + * + * here even more important to align src and dst on a 32-bit (or even + * better 64-bit) boundary + */ + +asmlinkage __wsum csum_partial_copy_generic(const void *src, void *dst, + int len, __wsum sum, + int *src_err_ptr, int *dst_err_ptr); + +/* + * Note: when you get a NULL pointer exception here this means someone + * passed in an incorrect kernel address to one of these functions. + * + * If you use these functions directly please don't forget the + * access_ok(). + */ +static inline +__wsum csum_partial_copy_nocheck(const void *src, void *dst, + int len, __wsum sum) +{ + return csum_partial_copy_generic(src, dst, len, sum, NULL, NULL); +} + +static inline +__wsum csum_partial_copy_from_user(const void __user *src, void *dst, + int len, __wsum sum, int *err_ptr) +{ + return csum_partial_copy_generic((__force const void *)src, dst, + len, sum, err_ptr, NULL); +} + +/* + * Fold a partial checksum + */ + +static inline __sum16 csum_fold(__wsum sum) +{ + unsigned int __dummy; + __asm__("swap.w %0, %1\n\t" + "extu.w %0, %0\n\t" + "extu.w %1, %1\n\t" + "add %1, %0\n\t" + "swap.w %0, %1\n\t" + "add %1, %0\n\t" + "not %0, %0\n\t" + : "=r" (sum), "=&r" (__dummy) + : "0" (sum) + : "t"); + return (__force __sum16)sum; +} + +/* + * This is a version of ip_compute_csum() optimized for IP headers, + * which always checksum on 4 octet boundaries. + * + * i386 version by Jorge Cwik <jorge@laser.satlink.net>, adapted + * for linux by * Arnt Gulbrandsen. + */ +static inline __sum16 ip_fast_csum(const void *iph, unsigned int ihl) +{ + unsigned int sum, __dummy0, __dummy1; + + __asm__ __volatile__( + "mov.l @%1+, %0\n\t" + "mov.l @%1+, %3\n\t" + "add #-2, %2\n\t" + "clrt\n\t" + "1:\t" + "addc %3, %0\n\t" + "movt %4\n\t" + "mov.l @%1+, %3\n\t" + "dt %2\n\t" + "bf/s 1b\n\t" + " cmp/eq #1, %4\n\t" + "addc %3, %0\n\t" + "addc %2, %0" /* Here %2 is 0, add carry-bit */ + /* Since the input registers which are loaded with iph and ihl + are modified, we must also specify them as outputs, or gcc + will assume they contain their original values. */ + : "=r" (sum), "=r" (iph), "=r" (ihl), "=&r" (__dummy0), "=&z" (__dummy1) + : "1" (iph), "2" (ihl) + : "t", "memory"); + + return csum_fold(sum); +} + +static inline __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr, + unsigned short len, + unsigned short proto, + __wsum sum) +{ +#ifdef __LITTLE_ENDIAN__ + unsigned long len_proto = (proto + len) << 8; +#else + unsigned long len_proto = proto + len; +#endif + __asm__("clrt\n\t" + "addc %0, %1\n\t" + "addc %2, %1\n\t" + "addc %3, %1\n\t" + "movt %0\n\t" + "add %1, %0" + : "=r" (sum), "=r" (len_proto) + : "r" (daddr), "r" (saddr), "1" (len_proto), "0" (sum) + : "t"); + + return sum; +} + +/* + * computes the checksum of the TCP/UDP pseudo-header + * returns a 16-bit checksum, already complemented + */ +static inline __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr, + unsigned short len, + unsigned short proto, + __wsum sum) +{ + return csum_fold(csum_tcpudp_nofold(saddr, daddr, len, proto, sum)); +} + +/* + * this routine is used for miscellaneous IP-like checksums, mainly + * in icmp.c + */ +static inline __sum16 ip_compute_csum(const void *buff, int len) +{ + return csum_fold(csum_partial(buff, len, 0)); +} + +#define _HAVE_ARCH_IPV6_CSUM +static inline __sum16 csum_ipv6_magic(const struct in6_addr *saddr, + const struct in6_addr *daddr, + __u32 len, unsigned short proto, + __wsum sum) +{ + unsigned int __dummy; + __asm__("clrt\n\t" + "mov.l @(0,%2), %1\n\t" + "addc %1, %0\n\t" + "mov.l @(4,%2), %1\n\t" + "addc %1, %0\n\t" + "mov.l @(8,%2), %1\n\t" + "addc %1, %0\n\t" + "mov.l @(12,%2), %1\n\t" + "addc %1, %0\n\t" + "mov.l @(0,%3), %1\n\t" + "addc %1, %0\n\t" + "mov.l @(4,%3), %1\n\t" + "addc %1, %0\n\t" + "mov.l @(8,%3), %1\n\t" + "addc %1, %0\n\t" + "mov.l @(12,%3), %1\n\t" + "addc %1, %0\n\t" + "addc %4, %0\n\t" + "addc %5, %0\n\t" + "movt %1\n\t" + "add %1, %0\n" + : "=r" (sum), "=&r" (__dummy) + : "r" (saddr), "r" (daddr), + "r" (htonl(len)), "r" (htonl(proto)), "0" (sum) + : "t"); + + return csum_fold(sum); +} + +/* + * Copy and checksum to user + */ +#define HAVE_CSUM_COPY_USER +static inline __wsum csum_and_copy_to_user(const void *src, + void __user *dst, + int len, __wsum sum, + int *err_ptr) +{ + if (access_ok(VERIFY_WRITE, dst, len)) + return csum_partial_copy_generic((__force const void *)src, + dst, len, sum, NULL, err_ptr); + + if (len) + *err_ptr = -EFAULT; + + return (__force __wsum)-1; /* invalid checksum */ +} +#endif /* __ASM_SH_CHECKSUM_H */ diff --git a/arch/sh/include/asm/checksum_64.h b/arch/sh/include/asm/checksum_64.h new file mode 100644 index 000000000000..9c62a031a8f5 --- /dev/null +++ b/arch/sh/include/asm/checksum_64.h @@ -0,0 +1,78 @@ +#ifndef __ASM_SH_CHECKSUM_64_H +#define __ASM_SH_CHECKSUM_64_H + +/* + * include/asm-sh/checksum_64.h + * + * Copyright (C) 2000, 2001 Paolo Alberelli + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +/* + * computes the checksum of a memory block at buff, length len, + * and adds in "sum" (32-bit) + * + * returns a 32-bit number suitable for feeding into itself + * or csum_tcpudp_magic + * + * this function must be called with even lengths, except + * for the last fragment, which may be odd + * + * it's best to have buff aligned on a 32-bit boundary + */ +asmlinkage __wsum csum_partial(const void *buff, int len, __wsum sum); + +/* + * Note: when you get a NULL pointer exception here this means someone + * passed in an incorrect kernel address to one of these functions. + * + * If you use these functions directly please don't forget the + * access_ok(). + */ + + +__wsum csum_partial_copy_nocheck(const void *src, void *dst, int len, + __wsum sum); + +__wsum csum_partial_copy_from_user(const void __user *src, void *dst, + int len, __wsum sum, int *err_ptr); + +static inline __sum16 csum_fold(__wsum csum) +{ + u32 sum = (__force u32)csum; + sum = (sum & 0xffff) + (sum >> 16); + sum = (sum & 0xffff) + (sum >> 16); + return (__force __sum16)~sum; +} + +__sum16 ip_fast_csum(const void *iph, unsigned int ihl); + +__wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr, + unsigned short len, unsigned short proto, + __wsum sum); + +/* + * computes the checksum of the TCP/UDP pseudo-header + * returns a 16-bit checksum, already complemented + */ +static inline __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr, + unsigned short len, + unsigned short proto, + __wsum sum) +{ + return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum)); +} + +/* + * this routine is used for miscellaneous IP-like checksums, mainly + * in icmp.c + */ +static inline __sum16 ip_compute_csum(const void *buff, int len) +{ + return csum_fold(csum_partial(buff, len, 0)); +} + +#endif /* __ASM_SH_CHECKSUM_64_H */ diff --git a/arch/sh/include/asm/clock.h b/arch/sh/include/asm/clock.h new file mode 100644 index 000000000000..720dfab7b15e --- /dev/null +++ b/arch/sh/include/asm/clock.h @@ -0,0 +1,97 @@ +#ifndef __ASM_SH_CLOCK_H +#define __ASM_SH_CLOCK_H + +#include <linux/kref.h> +#include <linux/list.h> +#include <linux/seq_file.h> +#include <linux/clk.h> +#include <linux/err.h> + +struct clk; + +struct clk_ops { + void (*init)(struct clk *clk); + void (*enable)(struct clk *clk); + void (*disable)(struct clk *clk); + void (*recalc)(struct clk *clk); + int (*set_rate)(struct clk *clk, unsigned long rate, int algo_id); + long (*round_rate)(struct clk *clk, unsigned long rate); +}; + +struct clk { + struct list_head node; + const char *name; + int id; + struct module *owner; + + struct clk *parent; + struct clk_ops *ops; + + struct kref kref; + + unsigned long rate; + unsigned long flags; + unsigned long arch_flags; +}; + +#define CLK_ALWAYS_ENABLED (1 << 0) +#define CLK_RATE_PROPAGATES (1 << 1) + +/* Should be defined by processor-specific code */ +void arch_init_clk_ops(struct clk_ops **, int type); + +/* arch/sh/kernel/cpu/clock.c */ +int clk_init(void); + +void clk_recalc_rate(struct clk *); + +int clk_register(struct clk *); +void clk_unregister(struct clk *); + +static inline int clk_always_enable(const char *id) +{ + struct clk *clk; + int ret; + + clk = clk_get(NULL, id); + if (IS_ERR(clk)) + return PTR_ERR(clk); + + ret = clk_enable(clk); + if (ret) + clk_put(clk); + + return ret; +} + +/* the exported API, in addition to clk_set_rate */ +/** + * clk_set_rate_ex - set the clock rate for a clock source, with additional parameter + * @clk: clock source + * @rate: desired clock rate in Hz + * @algo_id: algorithm id to be passed down to ops->set_rate + * + * Returns success (0) or negative errno. + */ +int clk_set_rate_ex(struct clk *clk, unsigned long rate, int algo_id); + +enum clk_sh_algo_id { + NO_CHANGE = 0, + + IUS_N1_N1, + IUS_322, + IUS_522, + IUS_N11, + + SB_N1, + + SB3_N1, + SB3_32, + SB3_43, + SB3_54, + + BP_N1, + + IP_N1, +}; +#endif /* __ASM_SH_CLOCK_H */ diff --git a/arch/sh/include/asm/cmpxchg-grb.h b/arch/sh/include/asm/cmpxchg-grb.h new file mode 100644 index 000000000000..e2681abe764f --- /dev/null +++ b/arch/sh/include/asm/cmpxchg-grb.h @@ -0,0 +1,70 @@ +#ifndef __ASM_SH_CMPXCHG_GRB_H +#define __ASM_SH_CMPXCHG_GRB_H + +static inline unsigned long xchg_u32(volatile u32 *m, unsigned long val) +{ + unsigned long retval; + + __asm__ __volatile__ ( + " .align 2 \n\t" + " mova 1f, r0 \n\t" /* r0 = end point */ + " nop \n\t" + " mov r15, r1 \n\t" /* r1 = saved sp */ + " mov #-4, r15 \n\t" /* LOGIN */ + " mov.l @%1, %0 \n\t" /* load old value */ + " mov.l %2, @%1 \n\t" /* store new value */ + "1: mov r1, r15 \n\t" /* LOGOUT */ + : "=&r" (retval), + "+r" (m) + : "r" (val) + : "memory", "r0", "r1"); + + return retval; +} + +static inline unsigned long xchg_u8(volatile u8 *m, unsigned long val) +{ + unsigned long retval; + + __asm__ __volatile__ ( + " .align 2 \n\t" + " mova 1f, r0 \n\t" /* r0 = end point */ + " mov r15, r1 \n\t" /* r1 = saved sp */ + " mov #-6, r15 \n\t" /* LOGIN */ + " mov.b @%1, %0 \n\t" /* load old value */ + " extu.b %0, %0 \n\t" /* extend as unsigned */ + " mov.b %2, @%1 \n\t" /* store new value */ + "1: mov r1, r15 \n\t" /* LOGOUT */ + : "=&r" (retval), + "+r" (m) + : "r" (val) + : "memory" , "r0", "r1"); + + return retval; +} + +static inline unsigned long __cmpxchg_u32(volatile int *m, unsigned long old, + unsigned long new) +{ + unsigned long retval; + + __asm__ __volatile__ ( + " .align 2 \n\t" + " mova 1f, r0 \n\t" /* r0 = end point */ + " nop \n\t" + " mov r15, r1 \n\t" /* r1 = saved sp */ + " mov #-8, r15 \n\t" /* LOGIN */ + " mov.l @%1, %0 \n\t" /* load old value */ + " cmp/eq %0, %2 \n\t" + " bf 1f \n\t" /* if not equal */ + " mov.l %2, @%1 \n\t" /* store new value */ + "1: mov r1, r15 \n\t" /* LOGOUT */ + : "=&r" (retval), + "+r" (m) + : "r" (new) + : "memory" , "r0", "r1", "t"); + + return retval; +} + +#endif /* __ASM_SH_CMPXCHG_GRB_H */ diff --git a/arch/sh/include/asm/cmpxchg-irq.h b/arch/sh/include/asm/cmpxchg-irq.h new file mode 100644 index 000000000000..43049ec0554b --- /dev/null +++ b/arch/sh/include/asm/cmpxchg-irq.h @@ -0,0 +1,40 @@ +#ifndef __ASM_SH_CMPXCHG_IRQ_H +#define __ASM_SH_CMPXCHG_IRQ_H + +static inline unsigned long xchg_u32(volatile u32 *m, unsigned long val) +{ + unsigned long flags, retval; + + local_irq_save(flags); + retval = *m; + *m = val; + local_irq_restore(flags); + return retval; +} + +static inline unsigned long xchg_u8(volatile u8 *m, unsigned long val) +{ + unsigned long flags, retval; + + local_irq_save(flags); + retval = *m; + *m = val & 0xff; + local_irq_restore(flags); + return retval; +} + +static inline unsigned long __cmpxchg_u32(volatile int *m, unsigned long old, + unsigned long new) +{ + __u32 retval; + unsigned long flags; + + local_irq_save(flags); + retval = *m; + if (retval == old) + *m = new; + local_irq_restore(flags); /* implies memory barrier */ + return retval; +} + +#endif /* __ASM_SH_CMPXCHG_IRQ_H */ diff --git a/arch/sh/include/asm/cpu-features.h b/arch/sh/include/asm/cpu-features.h new file mode 100644 index 000000000000..86308aa39731 --- /dev/null +++ b/arch/sh/include/asm/cpu-features.h @@ -0,0 +1,25 @@ +#ifndef __ASM_SH_CPU_FEATURES_H +#define __ASM_SH_CPU_FEATURES_H + +/* + * Processor flags + * + * Note: When adding a new flag, keep cpu_flags[] in + * arch/sh/kernel/setup.c in sync so symbolic name + * mapping of the processor flags has a chance of being + * reasonably accurate. + * + * These flags are also available through the ELF + * auxiliary vector as AT_HWCAP. + */ +#define CPU_HAS_FPU 0x0001 /* Hardware FPU support */ +#define CPU_HAS_P2_FLUSH_BUG 0x0002 /* Need to flush the cache in P2 area */ +#define CPU_HAS_MMU_PAGE_ASSOC 0x0004 /* SH3: TLB way selection bit support */ +#define CPU_HAS_DSP 0x0008 /* SH-DSP: DSP support */ +#define CPU_HAS_PERF_COUNTER 0x0010 /* Hardware performance counters */ +#define CPU_HAS_PTEA 0x0020 /* PTEA register */ +#define CPU_HAS_LLSC 0x0040 /* movli.l/movco.l */ +#define CPU_HAS_L2_CACHE 0x0080 /* Secondary cache / URAM */ +#define CPU_HAS_OP32 0x0100 /* 32-bit instruction support */ + +#endif /* __ASM_SH_CPU_FEATURES_H */ diff --git a/arch/sh/include/asm/cputime.h b/arch/sh/include/asm/cputime.h new file mode 100644 index 000000000000..6ca395d1393e --- /dev/null +++ b/arch/sh/include/asm/cputime.h @@ -0,0 +1,6 @@ +#ifndef __SH_CPUTIME_H +#define __SH_CPUTIME_H + +#include <asm-generic/cputime.h> + +#endif /* __SH_CPUTIME_H */ diff --git a/arch/sh/include/asm/current.h b/arch/sh/include/asm/current.h new file mode 100644 index 000000000000..62b63880b333 --- /dev/null +++ b/arch/sh/include/asm/current.h @@ -0,0 +1,20 @@ +#ifndef __ASM_SH_CURRENT_H +#define __ASM_SH_CURRENT_H + +/* + * Copyright (C) 1999 Niibe Yutaka + * + */ + +#include <linux/thread_info.h> + +struct task_struct; + +static __inline__ struct task_struct * get_current(void) +{ + return current_thread_info()->task; +} + +#define current get_current() + +#endif /* __ASM_SH_CURRENT_H */ diff --git a/arch/sh/include/asm/delay.h b/arch/sh/include/asm/delay.h new file mode 100644 index 000000000000..4b16bf9b56bd --- /dev/null +++ b/arch/sh/include/asm/delay.h @@ -0,0 +1,26 @@ +#ifndef __ASM_SH_DELAY_H +#define __ASM_SH_DELAY_H + +/* + * Copyright (C) 1993 Linus Torvalds + * + * Delay routines calling functions in arch/sh/lib/delay.c + */ + +extern void __bad_udelay(void); +extern void __bad_ndelay(void); + +extern void __udelay(unsigned long usecs); +extern void __ndelay(unsigned long nsecs); +extern void __const_udelay(unsigned long xloops); +extern void __delay(unsigned long loops); + +#define udelay(n) (__builtin_constant_p(n) ? \ + ((n) > 20000 ? __bad_udelay() : __const_udelay((n) * 0x10c6ul)) : \ + __udelay(n)) + +#define ndelay(n) (__builtin_constant_p(n) ? \ + ((n) > 20000 ? __bad_ndelay() : __const_udelay((n) * 5ul)) : \ + __ndelay(n)) + +#endif /* __ASM_SH_DELAY_H */ diff --git a/arch/sh/include/asm/device.h b/arch/sh/include/asm/device.h new file mode 100644 index 000000000000..efd511d0803a --- /dev/null +++ b/arch/sh/include/asm/device.h @@ -0,0 +1,12 @@ +/* + * Arch specific extensions to struct device + * + * This file is released under the GPLv2 + */ +#include <asm-generic/device.h> + +struct platform_device; +/* allocate contiguous memory chunk and fill in struct resource */ +int platform_resource_setup_memory(struct platform_device *pdev, + char *name, unsigned long memsize); + diff --git a/arch/sh/include/asm/div64.h b/arch/sh/include/asm/div64.h new file mode 100644 index 000000000000..6cd978cefb28 --- /dev/null +++ b/arch/sh/include/asm/div64.h @@ -0,0 +1 @@ +#include <asm-generic/div64.h> diff --git a/arch/sh/include/asm/dma-mapping.h b/arch/sh/include/asm/dma-mapping.h new file mode 100644 index 000000000000..627315ecdb52 --- /dev/null +++ b/arch/sh/include/asm/dma-mapping.h @@ -0,0 +1,193 @@ +#ifndef __ASM_SH_DMA_MAPPING_H +#define __ASM_SH_DMA_MAPPING_H + +#include <linux/mm.h> +#include <linux/scatterlist.h> +#include <asm/cacheflush.h> +#include <asm/io.h> +#include <asm-generic/dma-coherent.h> + +extern struct bus_type pci_bus_type; + +#define dma_supported(dev, mask) (1) + +static inline int dma_set_mask(struct device *dev, u64 mask) +{ + if (!dev->dma_mask || !dma_supported(dev, mask)) + return -EIO; + + *dev->dma_mask = mask; + + return 0; +} + +void *dma_alloc_coherent(struct device *dev, size_t size, + dma_addr_t *dma_handle, gfp_t flag); + +void dma_free_coherent(struct device *dev, size_t size, + void *vaddr, dma_addr_t dma_handle); + +void dma_cache_sync(struct device *dev, void *vaddr, size_t size, + enum dma_data_direction dir); + +#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f) +#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h) +#define dma_is_consistent(d, h) (1) + +static inline dma_addr_t dma_map_single(struct device *dev, + void *ptr, size_t size, + enum dma_data_direction dir) +{ +#if defined(CONFIG_PCI) && !defined(CONFIG_SH_PCIDMA_NONCOHERENT) + if (dev->bus == &pci_bus_type) + return virt_to_phys(ptr); +#endif + dma_cache_sync(dev, ptr, size, dir); + + return virt_to_phys(ptr); +} + +#define dma_unmap_single(dev, addr, size, dir) do { } while (0) + +static inline int dma_map_sg(struct device *dev, struct scatterlist *sg, + int nents, enum dma_data_direction dir) +{ + int i; + + for (i = 0; i < nents; i++) { +#if !defined(CONFIG_PCI) || defined(CONFIG_SH_PCIDMA_NONCOHERENT) + dma_cache_sync(dev, sg_virt(&sg[i]), sg[i].length, dir); +#endif + sg[i].dma_address = sg_phys(&sg[i]); + } + + return nents; +} + +#define dma_unmap_sg(dev, sg, nents, dir) do { } while (0) + +static inline dma_addr_t dma_map_page(struct device *dev, struct page *page, + unsigned long offset, size_t size, + enum dma_data_direction dir) +{ + return dma_map_single(dev, page_address(page) + offset, size, dir); +} + +static inline void dma_unmap_page(struct device *dev, dma_addr_t dma_address, + size_t size, enum dma_data_direction dir) +{ + dma_unmap_single(dev, dma_address, size, dir); +} + +static inline void dma_sync_single(struct device *dev, dma_addr_t dma_handle, + size_t size, enum dma_data_direction dir) +{ +#if defined(CONFIG_PCI) && !defined(CONFIG_SH_PCIDMA_NONCOHERENT) + if (dev->bus == &pci_bus_type) + return; +#endif + dma_cache_sync(dev, phys_to_virt(dma_handle), size, dir); +} + +static inline void dma_sync_single_range(struct device *dev, + dma_addr_t dma_handle, + unsigned long offset, size_t size, + enum dma_data_direction dir) +{ +#if defined(CONFIG_PCI) && !defined(CONFIG_SH_PCIDMA_NONCOHERENT) + if (dev->bus == &pci_bus_type) + return; +#endif + dma_cache_sync(dev, phys_to_virt(dma_handle) + offset, size, dir); +} + +static inline void dma_sync_sg(struct device *dev, struct scatterlist *sg, + int nelems, enum dma_data_direction dir) +{ + int i; + + for (i = 0; i < nelems; i++) { +#if !defined(CONFIG_PCI) || defined(CONFIG_SH_PCIDMA_NONCOHERENT) + dma_cache_sync(dev, sg_virt(&sg[i]), sg[i].length, dir); +#endif + sg[i].dma_address = sg_phys(&sg[i]); + } +} + +static inline void dma_sync_single_for_cpu(struct device *dev, + dma_addr_t dma_handle, size_t size, + enum dma_data_direction dir) +{ + dma_sync_single(dev, dma_handle, size, dir); +} + +static inline void dma_sync_single_for_device(struct device *dev, + dma_addr_t dma_handle, + size_t size, + enum dma_data_direction dir) +{ + dma_sync_single(dev, dma_handle, size, dir); +} + +static inline void dma_sync_single_range_for_cpu(struct device *dev, + dma_addr_t dma_handle, + unsigned long offset, + size_t size, + enum dma_data_direction direction) +{ + dma_sync_single_for_cpu(dev, dma_handle+offset, size, direction); +} + +static inline void dma_sync_single_range_for_device(struct device *dev, + dma_addr_t dma_handle, + unsigned long offset, + size_t size, + enum dma_data_direction direction) +{ + dma_sync_single_for_device(dev, dma_handle+offset, size, direction); +} + + +static inline void dma_sync_sg_for_cpu(struct device *dev, + struct scatterlist *sg, int nelems, + enum dma_data_direction dir) +{ + dma_sync_sg(dev, sg, nelems, dir); +} + +static inline void dma_sync_sg_for_device(struct device *dev, + struct scatterlist *sg, int nelems, + enum dma_data_direction dir) +{ + dma_sync_sg(dev, sg, nelems, dir); +} + + +static inline int dma_get_cache_alignment(void) +{ + /* + * Each processor family will define its own L1_CACHE_SHIFT, + * L1_CACHE_BYTES wraps to this, so this is always safe. + */ + return L1_CACHE_BYTES; +} + +static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr) +{ + return dma_addr == 0; +} + +#define ARCH_HAS_DMA_DECLARE_COHERENT_MEMORY + +extern int +dma_declare_coherent_memory(struct device *dev, dma_addr_t bus_addr, + dma_addr_t device_addr, size_t size, int flags); + +extern void +dma_release_declared_memory(struct device *dev); + +extern void * +dma_mark_declared_memory_occupied(struct device *dev, + dma_addr_t device_addr, size_t size); + +#endif /* __ASM_SH_DMA_MAPPING_H */ diff --git a/arch/sh/include/asm/dma.h b/arch/sh/include/asm/dma.h new file mode 100644 index 000000000000..beca7128e2ab --- /dev/null +++ b/arch/sh/include/asm/dma.h @@ -0,0 +1,166 @@ +/* + * include/asm-sh/dma.h + * + * Copyright (C) 2003, 2004 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_SH_DMA_H +#define __ASM_SH_DMA_H +#ifdef __KERNEL__ + +#include <linux/spinlock.h> +#include <linux/wait.h> +#include <linux/sched.h> +#include <linux/sysdev.h> +#include <cpu/dma.h> + +/* The maximum address that we can perform a DMA transfer to on this platform */ +/* Don't define MAX_DMA_ADDRESS; it's useless on the SuperH and any + occurrence should be flagged as an error. */ +/* But... */ +/* XXX: This is not applicable to SuperH, just needed for alloc_bootmem */ +#define MAX_DMA_ADDRESS (PAGE_OFFSET+0x10000000) + +#ifdef CONFIG_NR_DMA_CHANNELS +# define MAX_DMA_CHANNELS (CONFIG_NR_DMA_CHANNELS) +#else +# define MAX_DMA_CHANNELS (CONFIG_NR_ONCHIP_DMA_CHANNELS) +#endif + +/* + * Read and write modes can mean drastically different things depending on the + * channel configuration. Consult your DMAC documentation and module + * implementation for further clues. + */ +#define DMA_MODE_READ 0x00 +#define DMA_MODE_WRITE 0x01 +#define DMA_MODE_MASK 0x01 + +#define DMA_AUTOINIT 0x10 + +/* + * DMAC (dma_info) flags + */ +enum { + DMAC_CHANNELS_CONFIGURED = 0x01, + DMAC_CHANNELS_TEI_CAPABLE = 0x02, /* Transfer end interrupt */ +}; + +/* + * DMA channel capabilities / flags + */ +enum { + DMA_CONFIGURED = 0x01, + + /* + * Transfer end interrupt, inherited from DMAC. + * wait_queue used in dma_wait_for_completion. + */ + DMA_TEI_CAPABLE = 0x02, +}; + +extern spinlock_t dma_spin_lock; + +struct dma_channel; + +struct dma_ops { + int (*request)(struct dma_channel *chan); + void (*free)(struct dma_channel *chan); + + int (*get_residue)(struct dma_channel *chan); + int (*xfer)(struct dma_channel *chan); + int (*configure)(struct dma_channel *chan, unsigned long flags); + int (*extend)(struct dma_channel *chan, unsigned long op, void *param); +}; + +struct dma_channel { + char dev_id[16]; /* unique name per DMAC of channel */ + + unsigned int chan; /* DMAC channel number */ + unsigned int vchan; /* Virtual channel number */ + + unsigned int mode; + unsigned int count; + + unsigned long sar; + unsigned long dar; + + const char **caps; + + unsigned long flags; + atomic_t busy; + + wait_queue_head_t wait_queue; + + struct sys_device dev; + void *priv_data; +}; + +struct dma_info { + struct platform_device *pdev; + + const char *name; + unsigned int nr_channels; + unsigned long flags; + + struct dma_ops *ops; + struct dma_channel *channels; + + struct list_head list; + int first_channel_nr; + int first_vchannel_nr; +}; + +struct dma_chan_caps { + int ch_num; + const char **caplist; +}; + +#define to_dma_channel(channel) container_of(channel, struct dma_channel, dev) + +/* arch/sh/drivers/dma/dma-api.c */ +extern int dma_xfer(unsigned int chan, unsigned long from, + unsigned long to, size_t size, unsigned int mode); + +#define dma_write(chan, from, to, size) \ + dma_xfer(chan, from, to, size, DMA_MODE_WRITE) +#define dma_write_page(chan, from, to) \ + dma_write(chan, from, to, PAGE_SIZE) + +#define dma_read(chan, from, to, size) \ + dma_xfer(chan, from, to, size, DMA_MODE_READ) +#define dma_read_page(chan, from, to) \ + dma_read(chan, from, to, PAGE_SIZE) + +extern int request_dma_bycap(const char **dmac, const char **caps, + const char *dev_id); +extern int request_dma(unsigned int chan, const char *dev_id); +extern void free_dma(unsigned int chan); +extern int get_dma_residue(unsigned int chan); +extern struct dma_info *get_dma_info(unsigned int chan); +extern struct dma_channel *get_dma_channel(unsigned int chan); +extern void dma_wait_for_completion(unsigned int chan); +extern void dma_configure_channel(unsigned int chan, unsigned long flags); + +extern int register_dmac(struct dma_info *info); +extern void unregister_dmac(struct dma_info *info); +extern struct dma_info *get_dma_info_by_name(const char *dmac_name); + +extern int dma_extend(unsigned int chan, unsigned long op, void *param); +extern int register_chan_caps(const char *dmac, struct dma_chan_caps *capslist); + +/* arch/sh/drivers/dma/dma-sysfs.c */ +extern int dma_create_sysfs_files(struct dma_channel *, struct dma_info *); +extern void dma_remove_sysfs_files(struct dma_channel *, struct dma_info *); + +#ifdef CONFIG_PCI +extern int isa_dma_bridge_buggy; +#else +#define isa_dma_bridge_buggy (0) +#endif + +#endif /* __KERNEL__ */ +#endif /* __ASM_SH_DMA_H */ diff --git a/arch/sh/include/asm/dmabrg.h b/arch/sh/include/asm/dmabrg.h new file mode 100644 index 000000000000..c5edba216cf1 --- /dev/null +++ b/arch/sh/include/asm/dmabrg.h @@ -0,0 +1,23 @@ +/* + * SH7760 DMABRG (USB/Audio) support + */ + +#ifndef _DMABRG_H_ +#define _DMABRG_H_ + +/* IRQ sources */ +#define DMABRGIRQ_USBDMA 0 +#define DMABRGIRQ_USBDMAERR 1 +#define DMABRGIRQ_A0TXF 2 +#define DMABRGIRQ_A0TXH 3 +#define DMABRGIRQ_A0RXF 4 +#define DMABRGIRQ_A0RXH 5 +#define DMABRGIRQ_A1TXF 6 +#define DMABRGIRQ_A1TXH 7 +#define DMABRGIRQ_A1RXF 8 +#define DMABRGIRQ_A1RXH 9 + +extern int dmabrg_request_irq(unsigned int, void(*)(void *), void *); +extern void dmabrg_free_irq(unsigned int); + +#endif diff --git a/arch/sh/include/asm/edosk7705.h b/arch/sh/include/asm/edosk7705.h new file mode 100644 index 000000000000..5bdc9d9be3de --- /dev/null +++ b/arch/sh/include/asm/edosk7705.h @@ -0,0 +1,30 @@ +/* + * include/asm-sh/edosk7705.h + * + * Modified version of io_se.h for the EDOSK7705 specific functions. + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + * + * IO functions for an Hitachi EDOSK7705 development board + */ + +#ifndef __ASM_SH_EDOSK7705_IO_H +#define __ASM_SH_EDOSK7705_IO_H + +#include <asm/io_generic.h> + +extern unsigned char sh_edosk7705_inb(unsigned long port); +extern unsigned int sh_edosk7705_inl(unsigned long port); + +extern void sh_edosk7705_outb(unsigned char value, unsigned long port); +extern void sh_edosk7705_outl(unsigned int value, unsigned long port); + +extern void sh_edosk7705_insb(unsigned long port, void *addr, unsigned long count); +extern void sh_edosk7705_insl(unsigned long port, void *addr, unsigned long count); +extern void sh_edosk7705_outsb(unsigned long port, const void *addr, unsigned long count); +extern void sh_edosk7705_outsl(unsigned long port, const void *addr, unsigned long count); + +extern unsigned long sh_edosk7705_isa_port2addr(unsigned long offset); + +#endif /* __ASM_SH_EDOSK7705_IO_H */ diff --git a/arch/sh/include/asm/elf.h b/arch/sh/include/asm/elf.h new file mode 100644 index 000000000000..f01449a8d378 --- /dev/null +++ b/arch/sh/include/asm/elf.h @@ -0,0 +1,244 @@ +#ifndef __ASM_SH_ELF_H +#define __ASM_SH_ELF_H + +#include <linux/utsname.h> +#include <asm/auxvec.h> +#include <asm/ptrace.h> +#include <asm/user.h> + +/* ELF header e_flags defines */ +#define EF_SH_PIC 0x100 /* -fpic */ +#define EF_SH_FDPIC 0x8000 /* -mfdpic */ + +/* SH (particularly SHcompact) relocation types */ +#define R_SH_NONE 0 +#define R_SH_DIR32 1 +#define R_SH_REL32 2 +#define R_SH_DIR8WPN 3 +#define R_SH_IND12W 4 +#define R_SH_DIR8WPL 5 +#define R_SH_DIR8WPZ 6 +#define R_SH_DIR8BP 7 +#define R_SH_DIR8W 8 +#define R_SH_DIR8L 9 +#define R_SH_SWITCH16 25 +#define R_SH_SWITCH32 26 +#define R_SH_USES 27 +#define R_SH_COUNT 28 +#define R_SH_ALIGN 29 +#define R_SH_CODE 30 +#define R_SH_DATA 31 +#define R_SH_LABEL 32 +#define R_SH_SWITCH8 33 +#define R_SH_GNU_VTINHERIT 34 +#define R_SH_GNU_VTENTRY 35 +#define R_SH_TLS_GD_32 144 +#define R_SH_TLS_LD_32 145 +#define R_SH_TLS_LDO_32 146 +#define R_SH_TLS_IE_32 147 +#define R_SH_TLS_LE_32 148 +#define R_SH_TLS_DTPMOD32 149 +#define R_SH_TLS_DTPOFF32 150 +#define R_SH_TLS_TPOFF32 151 +#define R_SH_GOT32 160 +#define R_SH_PLT32 161 +#define R_SH_COPY 162 +#define R_SH_GLOB_DAT 163 +#define R_SH_JMP_SLOT 164 +#define R_SH_RELATIVE 165 +#define R_SH_GOTOFF 166 +#define R_SH_GOTPC 167 + +/* FDPIC relocs */ +#define R_SH_GOT20 70 +#define R_SH_GOTOFF20 71 +#define R_SH_GOTFUNCDESC 72 +#define R_SH_GOTFUNCDESC20 73 +#define R_SH_GOTOFFFUNCDESC 74 +#define R_SH_GOTOFFFUNCDESC20 75 +#define R_SH_FUNCDESC 76 +#define R_SH_FUNCDESC_VALUE 77 + +#if 0 /* XXX - later .. */ +#define R_SH_GOT20 198 +#define R_SH_GOTOFF20 199 +#define R_SH_GOTFUNCDESC 200 +#define R_SH_GOTFUNCDESC20 201 +#define R_SH_GOTOFFFUNCDESC 202 +#define R_SH_GOTOFFFUNCDESC20 203 +#define R_SH_FUNCDESC 204 +#define R_SH_FUNCDESC_VALUE 205 +#endif + +/* SHmedia relocs */ +#define R_SH_IMM_LOW16 246 +#define R_SH_IMM_LOW16_PCREL 247 +#define R_SH_IMM_MEDLOW16 248 +#define R_SH_IMM_MEDLOW16_PCREL 249 +/* Keep this the last entry. */ +#define R_SH_NUM 256 + +/* + * ELF register definitions.. + */ + +typedef unsigned long elf_greg_t; + +#define ELF_NGREG (sizeof (struct pt_regs) / sizeof(elf_greg_t)) +typedef elf_greg_t elf_gregset_t[ELF_NGREG]; + +typedef struct user_fpu_struct elf_fpregset_t; + +/* + * These are used to set parameters in the core dumps. + */ +#define ELF_CLASS ELFCLASS32 +#ifdef __LITTLE_ENDIAN__ +#define ELF_DATA ELFDATA2LSB +#else +#define ELF_DATA ELFDATA2MSB +#endif +#define ELF_ARCH EM_SH + +#ifdef __KERNEL__ +/* + * This is used to ensure we don't load something for the wrong architecture. + */ +#define elf_check_arch(x) ((x)->e_machine == EM_SH) +#define elf_check_fdpic(x) ((x)->e_flags & EF_SH_FDPIC) +#define elf_check_const_displacement(x) ((x)->e_flags & EF_SH_PIC) + +#define USE_ELF_CORE_DUMP +#define ELF_FDPIC_CORE_EFLAGS EF_SH_FDPIC +#define ELF_EXEC_PAGESIZE PAGE_SIZE + +/* This is the location that an ET_DYN program is loaded if exec'ed. Typical + use of this is to invoke "./ld.so someprog" to test out a new version of + the loader. We need to make sure that it is out of the way of the program + that it will "exec", and that there is sufficient room for the brk. */ + +#define ELF_ET_DYN_BASE (2 * TASK_SIZE / 3) + +#define ELF_CORE_COPY_REGS(_dest,_regs) \ + memcpy((char *) &_dest, (char *) _regs, \ + sizeof(struct pt_regs)); + +/* This yields a mask that user programs can use to figure out what + instruction set this CPU supports. This could be done in user space, + but it's not easy, and we've already done it here. */ + +#define ELF_HWCAP (boot_cpu_data.flags) + +/* This yields a string that ld.so will use to load implementation + specific libraries for optimization. This is more specific in + intent than poking at uname or /proc/cpuinfo. + + For the moment, we have only optimizations for the Intel generations, + but that could change... */ + +#define ELF_PLATFORM (utsname()->machine) + +#ifdef __SH5__ +#define ELF_PLAT_INIT(_r, load_addr) \ + do { _r->regs[0]=0; _r->regs[1]=0; _r->regs[2]=0; _r->regs[3]=0; \ + _r->regs[4]=0; _r->regs[5]=0; _r->regs[6]=0; _r->regs[7]=0; \ + _r->regs[8]=0; _r->regs[9]=0; _r->regs[10]=0; _r->regs[11]=0; \ + _r->regs[12]=0; _r->regs[13]=0; _r->regs[14]=0; _r->regs[15]=0; \ + _r->regs[16]=0; _r->regs[17]=0; _r->regs[18]=0; _r->regs[19]=0; \ + _r->regs[20]=0; _r->regs[21]=0; _r->regs[22]=0; _r->regs[23]=0; \ + _r->regs[24]=0; _r->regs[25]=0; _r->regs[26]=0; _r->regs[27]=0; \ + _r->regs[28]=0; _r->regs[29]=0; _r->regs[30]=0; _r->regs[31]=0; \ + _r->regs[32]=0; _r->regs[33]=0; _r->regs[34]=0; _r->regs[35]=0; \ + _r->regs[36]=0; _r->regs[37]=0; _r->regs[38]=0; _r->regs[39]=0; \ + _r->regs[40]=0; _r->regs[41]=0; _r->regs[42]=0; _r->regs[43]=0; \ + _r->regs[44]=0; _r->regs[45]=0; _r->regs[46]=0; _r->regs[47]=0; \ + _r->regs[48]=0; _r->regs[49]=0; _r->regs[50]=0; _r->regs[51]=0; \ + _r->regs[52]=0; _r->regs[53]=0; _r->regs[54]=0; _r->regs[55]=0; \ + _r->regs[56]=0; _r->regs[57]=0; _r->regs[58]=0; _r->regs[59]=0; \ + _r->regs[60]=0; _r->regs[61]=0; _r->regs[62]=0; \ + _r->tregs[0]=0; _r->tregs[1]=0; _r->tregs[2]=0; _r->tregs[3]=0; \ + _r->tregs[4]=0; _r->tregs[5]=0; _r->tregs[6]=0; _r->tregs[7]=0; \ + _r->sr = SR_FD | SR_MMU; } while (0) +#else +#define ELF_PLAT_INIT(_r, load_addr) \ + do { _r->regs[0]=0; _r->regs[1]=0; _r->regs[2]=0; _r->regs[3]=0; \ + _r->regs[4]=0; _r->regs[5]=0; _r->regs[6]=0; _r->regs[7]=0; \ + _r->regs[8]=0; _r->regs[9]=0; _r->regs[10]=0; _r->regs[11]=0; \ + _r->regs[12]=0; _r->regs[13]=0; _r->regs[14]=0; \ + _r->sr = SR_FD; } while (0) + +#define ELF_FDPIC_PLAT_INIT(_r, _exec_map_addr, _interp_map_addr, \ + _dynamic_addr) \ +do { \ + _r->regs[0] = 0; \ + _r->regs[1] = 0; \ + _r->regs[2] = 0; \ + _r->regs[3] = 0; \ + _r->regs[4] = 0; \ + _r->regs[5] = 0; \ + _r->regs[6] = 0; \ + _r->regs[7] = 0; \ + _r->regs[8] = _exec_map_addr; \ + _r->regs[9] = _interp_map_addr; \ + _r->regs[10] = _dynamic_addr; \ + _r->regs[11] = 0; \ + _r->regs[12] = 0; \ + _r->regs[13] = 0; \ + _r->regs[14] = 0; \ + _r->sr = SR_FD; \ +} while (0) +#endif + +#define SET_PERSONALITY(ex, ibcs2) set_personality(PER_LINUX_32BIT) +struct task_struct; +extern int dump_task_regs (struct task_struct *, elf_gregset_t *); +extern int dump_task_fpu (struct task_struct *, elf_fpregset_t *); + +#define ELF_CORE_COPY_TASK_REGS(tsk, elf_regs) dump_task_regs(tsk, elf_regs) +#define ELF_CORE_COPY_FPREGS(tsk, elf_fpregs) dump_task_fpu(tsk, elf_fpregs) + +#ifdef CONFIG_VSYSCALL +/* vDSO has arch_setup_additional_pages */ +#define ARCH_HAS_SETUP_ADDITIONAL_PAGES +struct linux_binprm; +extern int arch_setup_additional_pages(struct linux_binprm *bprm, + int executable_stack); + +extern unsigned int vdso_enabled; +extern void __kernel_vsyscall; + +#define VDSO_BASE ((unsigned long)current->mm->context.vdso) +#define VDSO_SYM(x) (VDSO_BASE + (unsigned long)(x)) + +#define VSYSCALL_AUX_ENT \ + if (vdso_enabled) \ + NEW_AUX_ENT(AT_SYSINFO_EHDR, VDSO_BASE); +#else +#define VSYSCALL_AUX_ENT +#endif /* CONFIG_VSYSCALL */ + +#ifdef CONFIG_SH_FPU +#define FPU_AUX_ENT NEW_AUX_ENT(AT_FPUCW, FPSCR_INIT) +#else +#define FPU_AUX_ENT +#endif + +extern int l1i_cache_shape, l1d_cache_shape, l2_cache_shape; + +/* update AT_VECTOR_SIZE_ARCH if the number of NEW_AUX_ENT entries changes */ +#define ARCH_DLINFO \ +do { \ + /* Optional FPU initialization */ \ + FPU_AUX_ENT; \ + \ + /* Optional vsyscall entry */ \ + VSYSCALL_AUX_ENT; \ + \ + /* Cache desc */ \ + NEW_AUX_ENT(AT_L1I_CACHESHAPE, l1i_cache_shape); \ + NEW_AUX_ENT(AT_L1D_CACHESHAPE, l1d_cache_shape); \ + NEW_AUX_ENT(AT_L2_CACHESHAPE, l2_cache_shape); \ +} while (0) + +#endif /* __KERNEL__ */ +#endif /* __ASM_SH_ELF_H */ diff --git a/arch/sh/include/asm/emergency-restart.h b/arch/sh/include/asm/emergency-restart.h new file mode 100644 index 000000000000..108d8c48e42e --- /dev/null +++ b/arch/sh/include/asm/emergency-restart.h @@ -0,0 +1,6 @@ +#ifndef _ASM_EMERGENCY_RESTART_H +#define _ASM_EMERGENCY_RESTART_H + +#include <asm-generic/emergency-restart.h> + +#endif /* _ASM_EMERGENCY_RESTART_H */ diff --git a/arch/sh/include/asm/entry-macros.S b/arch/sh/include/asm/entry-macros.S new file mode 100644 index 000000000000..2dab0b8d9454 --- /dev/null +++ b/arch/sh/include/asm/entry-macros.S @@ -0,0 +1,33 @@ +! entry.S macro define + + .macro cli + stc sr, r0 + or #0xf0, r0 + ldc r0, sr + .endm + + .macro sti + mov #0xf0, r11 + extu.b r11, r11 + not r11, r11 + stc sr, r10 + and r11, r10 +#ifdef CONFIG_CPU_HAS_SR_RB + stc k_g_imask, r11 + or r11, r10 +#endif + ldc r10, sr + .endm + + .macro get_current_thread_info, ti, tmp +#ifdef CONFIG_CPU_HAS_SR_RB + stc r7_bank, \ti +#else + mov #((THREAD_SIZE - 1) >> 10) ^ 0xff, \tmp + shll8 \tmp + shll2 \tmp + mov r15, \ti + and \tmp, \ti +#endif + .endm + diff --git a/arch/sh/include/asm/errno.h b/arch/sh/include/asm/errno.h new file mode 100644 index 000000000000..51cf6f9cebb8 --- /dev/null +++ b/arch/sh/include/asm/errno.h @@ -0,0 +1,6 @@ +#ifndef __ASM_SH_ERRNO_H +#define __ASM_SH_ERRNO_H + +#include <asm-generic/errno.h> + +#endif /* __ASM_SH_ERRNO_H */ diff --git a/arch/sh/include/asm/fb.h b/arch/sh/include/asm/fb.h new file mode 100644 index 000000000000..d92e99cd8c8a --- /dev/null +++ b/arch/sh/include/asm/fb.h @@ -0,0 +1,19 @@ +#ifndef _ASM_FB_H_ +#define _ASM_FB_H_ + +#include <linux/fb.h> +#include <linux/fs.h> +#include <asm/page.h> + +static inline void fb_pgprotect(struct file *file, struct vm_area_struct *vma, + unsigned long off) +{ + vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot); +} + +static inline int fb_is_primary_device(struct fb_info *info) +{ + return 0; +} + +#endif /* _ASM_FB_H_ */ diff --git a/arch/sh/include/asm/fcntl.h b/arch/sh/include/asm/fcntl.h new file mode 100644 index 000000000000..46ab12db5739 --- /dev/null +++ b/arch/sh/include/asm/fcntl.h @@ -0,0 +1 @@ +#include <asm-generic/fcntl.h> diff --git a/arch/sh/include/asm/fixmap.h b/arch/sh/include/asm/fixmap.h new file mode 100644 index 000000000000..721fcc4d5e98 --- /dev/null +++ b/arch/sh/include/asm/fixmap.h @@ -0,0 +1,117 @@ +/* + * fixmap.h: compile-time virtual memory allocation + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1998 Ingo Molnar + * + * Support of BIGMEM added by Gerhard Wichert, Siemens AG, July 1999 + */ + +#ifndef _ASM_FIXMAP_H +#define _ASM_FIXMAP_H + +#include <linux/kernel.h> +#include <asm/page.h> +#ifdef CONFIG_HIGHMEM +#include <linux/threads.h> +#include <asm/kmap_types.h> +#endif + +/* + * Here we define all the compile-time 'special' virtual + * addresses. The point is to have a constant address at + * compile time, but to set the physical address only + * in the boot process. We allocate these special addresses + * from the end of P3 backwards. + * Also this lets us do fail-safe vmalloc(), we + * can guarantee that these special addresses and + * vmalloc()-ed addresses never overlap. + * + * these 'compile-time allocated' memory buffers are + * fixed-size 4k pages. (or larger if used with an increment + * highger than 1) use fixmap_set(idx,phys) to associate + * physical memory with fixmap indices. + * + * TLB entries of such buffers will not be flushed across + * task switches. + */ + +/* + * on UP currently we will have no trace of the fixmap mechanizm, + * no page table allocations, etc. This might change in the + * future, say framebuffers for the console driver(s) could be + * fix-mapped? + */ +enum fixed_addresses { +#define FIX_N_COLOURS 16 + FIX_CMAP_BEGIN, + FIX_CMAP_END = FIX_CMAP_BEGIN + FIX_N_COLOURS, + FIX_UNCACHED, +#ifdef CONFIG_HIGHMEM + FIX_KMAP_BEGIN, /* reserved pte's for temporary kernel mappings */ + FIX_KMAP_END = FIX_KMAP_BEGIN+(KM_TYPE_NR*NR_CPUS)-1, +#endif + __end_of_fixed_addresses +}; + +extern void __set_fixmap(enum fixed_addresses idx, + unsigned long phys, pgprot_t flags); + +#define set_fixmap(idx, phys) \ + __set_fixmap(idx, phys, PAGE_KERNEL) +/* + * Some hardware wants to get fixmapped without caching. + */ +#define set_fixmap_nocache(idx, phys) \ + __set_fixmap(idx, phys, PAGE_KERNEL_NOCACHE) +/* + * used by vmalloc.c. + * + * Leave one empty page between vmalloc'ed areas and + * the start of the fixmap, and leave one page empty + * at the top of mem.. + */ +#ifdef CONFIG_SUPERH32 +#define FIXADDR_TOP (P4SEG - PAGE_SIZE) +#else +#define FIXADDR_TOP (0xff000000 - PAGE_SIZE) +#endif +#define FIXADDR_SIZE (__end_of_fixed_addresses << PAGE_SHIFT) +#define FIXADDR_START (FIXADDR_TOP - FIXADDR_SIZE) + +#define __fix_to_virt(x) (FIXADDR_TOP - ((x) << PAGE_SHIFT)) +#define __virt_to_fix(x) ((FIXADDR_TOP - ((x)&PAGE_MASK)) >> PAGE_SHIFT) + +extern void __this_fixmap_does_not_exist(void); + +/* + * 'index to address' translation. If anyone tries to use the idx + * directly without tranlation, we catch the bug with a NULL-deference + * kernel oops. Illegal ranges of incoming indices are caught too. + */ +static inline unsigned long fix_to_virt(const unsigned int idx) +{ + /* + * this branch gets completely eliminated after inlining, + * except when someone tries to use fixaddr indices in an + * illegal way. (such as mixing up address types or using + * out-of-range indices). + * + * If it doesn't get removed, the linker will complain + * loudly with a reasonably clear error message.. + */ + if (idx >= __end_of_fixed_addresses) + __this_fixmap_does_not_exist(); + + return __fix_to_virt(idx); +} + +static inline unsigned long virt_to_fix(const unsigned long vaddr) +{ + BUG_ON(vaddr >= FIXADDR_TOP || vaddr < FIXADDR_START); + return __virt_to_fix(vaddr); +} +#endif diff --git a/arch/sh/include/asm/flat.h b/arch/sh/include/asm/flat.h new file mode 100644 index 000000000000..0cc800299e06 --- /dev/null +++ b/arch/sh/include/asm/flat.h @@ -0,0 +1,24 @@ +/* + * include/asm-sh/flat.h + * + * uClinux flat-format executables + * + * Copyright (C) 2003 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive for + * more details. + */ +#ifndef __ASM_SH_FLAT_H +#define __ASM_SH_FLAT_H + +#define flat_stack_align(sp) /* nothing needed */ +#define flat_argvp_envp_on_stack() 0 +#define flat_old_ram_flag(flags) (flags) +#define flat_reloc_valid(reloc, size) ((reloc) <= (size)) +#define flat_get_addr_from_rp(rp, relval, flags, p) get_unaligned(rp) +#define flat_put_addr_at_rp(rp, val, relval) put_unaligned(val,rp) +#define flat_get_relocate_addr(rel) (rel) +#define flat_set_persistent(relval, p) ({ (void)p; 0; }) + +#endif /* __ASM_SH_FLAT_H */ diff --git a/arch/sh/include/asm/fpu.h b/arch/sh/include/asm/fpu.h new file mode 100644 index 000000000000..91462fea1507 --- /dev/null +++ b/arch/sh/include/asm/fpu.h @@ -0,0 +1,55 @@ +#ifndef __ASM_SH_FPU_H +#define __ASM_SH_FPU_H + +#ifndef __ASSEMBLY__ +#include <linux/preempt.h> +#include <asm/ptrace.h> + +#ifdef CONFIG_SH_FPU +static inline void release_fpu(struct pt_regs *regs) +{ + regs->sr |= SR_FD; +} + +static inline void grab_fpu(struct pt_regs *regs) +{ + regs->sr &= ~SR_FD; +} + +struct task_struct; + +extern void save_fpu(struct task_struct *__tsk, struct pt_regs *regs); +#else + +#define release_fpu(regs) do { } while (0) +#define grab_fpu(regs) do { } while (0) + +static inline void save_fpu(struct task_struct *tsk, struct pt_regs *regs) +{ + clear_tsk_thread_flag(tsk, TIF_USEDFPU); +} +#endif + +extern int do_fpu_inst(unsigned short, struct pt_regs *); + +static inline void unlazy_fpu(struct task_struct *tsk, struct pt_regs *regs) +{ + preempt_disable(); + if (test_tsk_thread_flag(tsk, TIF_USEDFPU)) + save_fpu(tsk, regs); + preempt_enable(); +} + +static inline void clear_fpu(struct task_struct *tsk, struct pt_regs *regs) +{ + preempt_disable(); + if (test_tsk_thread_flag(tsk, TIF_USEDFPU)) { + clear_tsk_thread_flag(tsk, TIF_USEDFPU); + release_fpu(regs); + } + preempt_enable(); +} + +#endif /* __ASSEMBLY__ */ + +#endif /* __ASM_SH_FPU_H */ diff --git a/arch/sh/include/asm/freq.h b/arch/sh/include/asm/freq.h new file mode 100644 index 000000000000..4ece90b09b9c --- /dev/null +++ b/arch/sh/include/asm/freq.h @@ -0,0 +1,18 @@ +/* + * include/asm-sh/freq.h + * + * Copyright (C) 2002, 2003 Paul Mundt + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#ifndef __ASM_SH_FREQ_H +#define __ASM_SH_FREQ_H +#ifdef __KERNEL__ + +#include <cpu/freq.h> + +#endif /* __KERNEL__ */ +#endif /* __ASM_SH_FREQ_H */ diff --git a/arch/sh/include/asm/futex-irq.h b/arch/sh/include/asm/futex-irq.h new file mode 100644 index 000000000000..a9f16a7f9aea --- /dev/null +++ b/arch/sh/include/asm/futex-irq.h @@ -0,0 +1,111 @@ +#ifndef __ASM_SH_FUTEX_IRQ_H +#define __ASM_SH_FUTEX_IRQ_H + +#include <asm/system.h> + +static inline int atomic_futex_op_xchg_set(int oparg, int __user *uaddr, + int *oldval) +{ + unsigned long flags; + int ret; + + local_irq_save(flags); + + ret = get_user(*oldval, uaddr); + if (!ret) + ret = put_user(oparg, uaddr); + + local_irq_restore(flags); + + return ret; +} + +static inline int atomic_futex_op_xchg_add(int oparg, int __user *uaddr, + int *oldval) +{ + unsigned long flags; + int ret; + + local_irq_save(flags); + + ret = get_user(*oldval, uaddr); + if (!ret) + ret = put_user(*oldval + oparg, uaddr); + + local_irq_restore(flags); + + return ret; +} + +static inline int atomic_futex_op_xchg_or(int oparg, int __user *uaddr, + int *oldval) +{ + unsigned long flags; + int ret; + + local_irq_save(flags); + + ret = get_user(*oldval, uaddr); + if (!ret) + ret = put_user(*oldval | oparg, uaddr); + + local_irq_restore(flags); + + return ret; +} + +static inline int atomic_futex_op_xchg_and(int oparg, int __user *uaddr, + int *oldval) +{ + unsigned long flags; + int ret; + + local_irq_save(flags); + + ret = get_user(*oldval, uaddr); + if (!ret) + ret = put_user(*oldval & oparg, uaddr); + + local_irq_restore(flags); + + return ret; +} + +static inline int atomic_futex_op_xchg_xor(int oparg, int __user *uaddr, + int *oldval) +{ + unsigned long flags; + int ret; + + local_irq_save(flags); + + ret = get_user(*oldval, uaddr); + if (!ret) + ret = put_user(*oldval ^ oparg, uaddr); + + local_irq_restore(flags); + + return ret; +} + +static inline int atomic_futex_op_cmpxchg_inatomic(int __user *uaddr, + int oldval, int newval) +{ + unsigned long flags; + int ret, prev = 0; + + local_irq_save(flags); + + ret = get_user(prev, uaddr); + if (!ret && oldval == prev) + ret = put_user(newval, uaddr); + + local_irq_restore(flags); + + if (ret) + return ret; + + return prev; +} + +#endif /* __ASM_SH_FUTEX_IRQ_H */ diff --git a/arch/sh/include/asm/futex.h b/arch/sh/include/asm/futex.h new file mode 100644 index 000000000000..68256ec5fa35 --- /dev/null +++ b/arch/sh/include/asm/futex.h @@ -0,0 +1,77 @@ +#ifndef __ASM_SH_FUTEX_H +#define __ASM_SH_FUTEX_H + +#ifdef __KERNEL__ + +#include <linux/futex.h> +#include <linux/uaccess.h> +#include <asm/errno.h> + +/* XXX: UP variants, fix for SH-4A and SMP.. */ +#include <asm/futex-irq.h> + +static inline int futex_atomic_op_inuser(int encoded_op, int __user *uaddr) +{ + int op = (encoded_op >> 28) & 7; + int cmp = (encoded_op >> 24) & 15; + int oparg = (encoded_op << 8) >> 20; + int cmparg = (encoded_op << 20) >> 20; + int oldval = 0, ret; + + if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28)) + oparg = 1 << oparg; + + if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int))) + return -EFAULT; + + pagefault_disable(); + + switch (op) { + case FUTEX_OP_SET: + ret = atomic_futex_op_xchg_set(oparg, uaddr, &oldval); + break; + case FUTEX_OP_ADD: + ret = atomic_futex_op_xchg_add(oparg, uaddr, &oldval); + break; + case FUTEX_OP_OR: + ret = atomic_futex_op_xchg_or(oparg, uaddr, &oldval); + break; + case FUTEX_OP_ANDN: + ret = atomic_futex_op_xchg_and(~oparg, uaddr, &oldval); + break; + case FUTEX_OP_XOR: + ret = atomic_futex_op_xchg_xor(oparg, uaddr, &oldval); + break; + default: + ret = -ENOSYS; + break; + } + + pagefault_enable(); + + if (!ret) { + switch (cmp) { + case FUTEX_OP_CMP_EQ: ret = (oldval == cmparg); break; + case FUTEX_OP_CMP_NE: ret = (oldval != cmparg); break; + case FUTEX_OP_CMP_LT: ret = (oldval < cmparg); break; + case FUTEX_OP_CMP_GE: ret = (oldval >= cmparg); break; + case FUTEX_OP_CMP_LE: ret = (oldval <= cmparg); break; + case FUTEX_OP_CMP_GT: ret = (oldval > cmparg); break; + default: ret = -ENOSYS; + } + } + + return ret; +} + +static inline int +futex_atomic_cmpxchg_inatomic(int __user *uaddr, int oldval, int newval) +{ + if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int))) + return -EFAULT; + + return atomic_futex_op_cmpxchg_inatomic(uaddr, oldval, newval); +} + +#endif /* __KERNEL__ */ +#endif /* __ASM_SH_FUTEX_H */ diff --git a/arch/sh/include/asm/gpio.h b/arch/sh/include/asm/gpio.h new file mode 100644 index 000000000000..cf32bd2df881 --- /dev/null +++ b/arch/sh/include/asm/gpio.h @@ -0,0 +1,19 @@ +/* + * include/asm-sh/gpio.h + * + * Copyright (C) 2007 Markus Brunner, Mark Jonas + * + * Addresses for the Pin Function Controller + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_SH_GPIO_H +#define __ASM_SH_GPIO_H + +#if defined(CONFIG_CPU_SH3) +#include <cpu/gpio.h> +#endif + +#endif /* __ASM_SH_GPIO_H */ diff --git a/arch/sh/include/asm/hardirq.h b/arch/sh/include/asm/hardirq.h new file mode 100644 index 000000000000..715ee237fc77 --- /dev/null +++ b/arch/sh/include/asm/hardirq.h @@ -0,0 +1,16 @@ +#ifndef __ASM_SH_HARDIRQ_H +#define __ASM_SH_HARDIRQ_H + +#include <linux/threads.h> +#include <linux/irq.h> + +/* entry.S is sensitive to the offsets of these fields */ +typedef struct { + unsigned int __softirq_pending; +} ____cacheline_aligned irq_cpustat_t; + +#include <linux/irq_cpustat.h> /* Standard mappings for irq_cpustat_t above */ + +extern void ack_bad_irq(unsigned int irq); + +#endif /* __ASM_SH_HARDIRQ_H */ diff --git a/arch/sh/include/asm/hd64461.h b/arch/sh/include/asm/hd64461.h new file mode 100644 index 000000000000..8c1353baf00f --- /dev/null +++ b/arch/sh/include/asm/hd64461.h @@ -0,0 +1,250 @@ +#ifndef __ASM_SH_HD64461 +#define __ASM_SH_HD64461 +/* + * Copyright (C) 2007 Kristoffer Ericson <Kristoffer.Ericson@gmail.com> + * Copyright (C) 2004 Paul Mundt + * Copyright (C) 2000 YAEGASHI Takeshi + * + * Hitachi HD64461 companion chip support + * (please note manual reference 0x10000000 = 0xb0000000) + */ + +/* Constants for PCMCIA mappings */ +#define HD64461_PCC_WINDOW 0x01000000 + +/* Area 6 - Slot 0 - memory and/or IO card */ +#define HD64461_PCC0_BASE (CONFIG_HD64461_IOBASE + 0x8000000) +#define HD64461_PCC0_ATTR (HD64461_PCC0_BASE) /* 0xb80000000 */ +#define HD64461_PCC0_COMM (HD64461_PCC0_BASE+HD64461_PCC_WINDOW) /* 0xb90000000 */ +#define HD64461_PCC0_IO (HD64461_PCC0_BASE+2*HD64461_PCC_WINDOW) /* 0xba0000000 */ + +/* Area 5 - Slot 1 - memory card only */ +#define HD64461_PCC1_BASE (CONFIG_HD64461_IOBASE + 0x4000000) +#define HD64461_PCC1_ATTR (HD64461_PCC1_BASE) /* 0xb4000000 */ +#define HD64461_PCC1_COMM (HD64461_PCC1_BASE+HD64461_PCC_WINDOW) /* 0xb5000000 */ + +/* Standby Control Register for HD64461 */ +#define HD64461_STBCR CONFIG_HD64461_IOBASE +#define HD64461_STBCR_CKIO_STBY 0x2000 +#define HD64461_STBCR_SAFECKE_IST 0x1000 +#define HD64461_STBCR_SLCKE_IST 0x0800 +#define HD64461_STBCR_SAFECKE_OST 0x0400 +#define HD64461_STBCR_SLCKE_OST 0x0200 +#define HD64461_STBCR_SMIAST 0x0100 +#define HD64461_STBCR_SLCDST 0x0080 +#define HD64461_STBCR_SPC0ST 0x0040 +#define HD64461_STBCR_SPC1ST 0x0020 +#define HD64461_STBCR_SAFEST 0x0010 +#define HD64461_STBCR_STM0ST 0x0008 +#define HD64461_STBCR_STM1ST 0x0004 +#define HD64461_STBCR_SIRST 0x0002 +#define HD64461_STBCR_SURTST 0x0001 + +/* System Configuration Register */ +#define HD64461_SYSCR (CONFIG_HD64461_IOBASE + 0x02) + +/* CPU Data Bus Control Register */ +#define HD64461_SCPUCR (CONFIG_HD64461_IOBASE + 0x04) + +/* Base Address Register */ +#define HD64461_LCDCBAR (CONFIG_HD64461_IOBASE + 0x1000) + +/* Line increment address */ +#define HD64461_LCDCLOR (CONFIG_HD64461_IOBASE + 0x1002) + +/* Controls LCD controller */ +#define HD64461_LCDCCR (CONFIG_HD64461_IOBASE + 0x1004) + +/* LCCDR control bits */ +#define HD64461_LCDCCR_STBACK 0x0400 /* Standby Back */ +#define HD64461_LCDCCR_STREQ 0x0100 /* Standby Request */ +#define HD64461_LCDCCR_MOFF 0x0080 /* Memory Off */ +#define HD64461_LCDCCR_REFSEL 0x0040 /* Refresh Select */ +#define HD64461_LCDCCR_EPON 0x0020 /* End Power On */ +#define HD64461_LCDCCR_SPON 0x0010 /* Start Power On */ + +/* Controls LCD (1) */ +#define HD64461_LDR1 (CONFIG_HD64461_IOBASE + 0x1010) +#define HD64461_LDR1_DON 0x01 /* Display On */ +#define HD64461_LDR1_DINV 0x80 /* Display Invert */ + +/* Controls LCD (2) */ +#define HD64461_LDR2 (CONFIG_HD64461_IOBASE + 0x1012) +#define HD64461_LDHNCR (CONFIG_HD64461_IOBASE + 0x1014) /* Number of horizontal characters */ +#define HD64461_LDHNSR (CONFIG_HD64461_IOBASE + 0x1016) /* Specify output start position + width of CL1 */ +#define HD64461_LDVNTR (CONFIG_HD64461_IOBASE + 0x1018) /* Specify total vertical lines */ +#define HD64461_LDVNDR (CONFIG_HD64461_IOBASE + 0x101a) /* specify number of display vertical lines */ +#define HD64461_LDVSPR (CONFIG_HD64461_IOBASE + 0x101c) /* specify vertical synchronization pos and AC nr */ + +/* Controls LCD (3) */ +#define HD64461_LDR3 (CONFIG_HD64461_IOBASE + 0x101e) + +/* Palette Registers */ +#define HD64461_CPTWAR (CONFIG_HD64461_IOBASE + 0x1030) /* Color Palette Write Address Register */ +#define HD64461_CPTWDR (CONFIG_HD64461_IOBASE + 0x1032) /* Color Palette Write Data Register */ +#define HD64461_CPTRAR (CONFIG_HD64461_IOBASE + 0x1034) /* Color Palette Read Address Register */ +#define HD64461_CPTRDR (CONFIG_HD64461_IOBASE + 0x1036) /* Color Palette Read Data Register */ + +#define HD64461_GRDOR (CONFIG_HD64461_IOBASE + 0x1040) /* Display Resolution Offset Register */ +#define HD64461_GRSCR (CONFIG_HD64461_IOBASE + 0x1042) /* Solid Color Register */ +#define HD64461_GRCFGR (CONFIG_HD64461_IOBASE + 0x1044) /* Accelerator Configuration Register */ + +#define HD64461_GRCFGR_ACCSTATUS 0x10 /* Accelerator Status */ +#define HD64461_GRCFGR_ACCRESET 0x08 /* Accelerator Reset */ +#define HD64461_GRCFGR_ACCSTART_BITBLT 0x06 /* Accelerator Start BITBLT */ +#define HD64461_GRCFGR_ACCSTART_LINE 0x04 /* Accelerator Start Line Drawing */ +#define HD64461_GRCFGR_COLORDEPTH16 0x01 /* Sets Colordepth 16 for Accelerator */ +#define HD64461_GRCFGR_COLORDEPTH8 0x01 /* Sets Colordepth 8 for Accelerator */ + +/* Line Drawing Registers */ +#define HD64461_LNSARH (CONFIG_HD64461_IOBASE + 0x1046) /* Line Start Address Register (H) */ +#define HD64461_LNSARL (CONFIG_HD64461_IOBASE + 0x1048) /* Line Start Address Register (L) */ +#define HD64461_LNAXLR (CONFIG_HD64461_IOBASE + 0x104a) /* Axis Pixel Length Register */ +#define HD64461_LNDGR (CONFIG_HD64461_IOBASE + 0x104c) /* Diagonal Register */ +#define HD64461_LNAXR (CONFIG_HD64461_IOBASE + 0x104e) /* Axial Register */ +#define HD64461_LNERTR (CONFIG_HD64461_IOBASE + 0x1050) /* Start Error Term Register */ +#define HD64461_LNMDR (CONFIG_HD64461_IOBASE + 0x1052) /* Line Mode Register */ + +/* BitBLT Registers */ +#define HD64461_BBTSSARH (CONFIG_HD64461_IOBASE + 0x1054) /* Source Start Address Register (H) */ +#define HD64461_BBTSSARL (CONFIG_HD64461_IOBASE + 0x1056) /* Source Start Address Register (L) */ +#define HD64461_BBTDSARH (CONFIG_HD64461_IOBASE + 0x1058) /* Destination Start Address Register (H) */ +#define HD64461_BBTDSARL (CONFIG_HD64461_IOBASE + 0x105a) /* Destination Start Address Register (L) */ +#define HD64461_BBTDWR (CONFIG_HD64461_IOBASE + 0x105c) /* Destination Block Width Register */ +#define HD64461_BBTDHR (CONFIG_HD64461_IOBASE + 0x105e) /* Destination Block Height Register */ +#define HD64461_BBTPARH (CONFIG_HD64461_IOBASE + 0x1060) /* Pattern Start Address Register (H) */ +#define HD64461_BBTPARL (CONFIG_HD64461_IOBASE + 0x1062) /* Pattern Start Address Register (L) */ +#define HD64461_BBTMARH (CONFIG_HD64461_IOBASE + 0x1064) /* Mask Start Address Register (H) */ +#define HD64461_BBTMARL (CONFIG_HD64461_IOBASE + 0x1066) /* Mask Start Address Register (L) */ +#define HD64461_BBTROPR (CONFIG_HD64461_IOBASE + 0x1068) /* ROP Register */ +#define HD64461_BBTMDR (CONFIG_HD64461_IOBASE + 0x106a) /* BitBLT Mode Register */ + +/* PC Card Controller Registers */ +/* Maps to Physical Area 6 */ +#define HD64461_PCC0ISR (CONFIG_HD64461_IOBASE + 0x2000) /* socket 0 interface status */ +#define HD64461_PCC0GCR (CONFIG_HD64461_IOBASE + 0x2002) /* socket 0 general control */ +#define HD64461_PCC0CSCR (CONFIG_HD64461_IOBASE + 0x2004) /* socket 0 card status change */ +#define HD64461_PCC0CSCIER (CONFIG_HD64461_IOBASE + 0x2006) /* socket 0 card status change interrupt enable */ +#define HD64461_PCC0SCR (CONFIG_HD64461_IOBASE + 0x2008) /* socket 0 software control */ +/* Maps to Physical Area 5 */ +#define HD64461_PCC1ISR (CONFIG_HD64461_IOBASE + 0x2010) /* socket 1 interface status */ +#define HD64461_PCC1GCR (CONFIG_HD64461_IOBASE + 0x2012) /* socket 1 general control */ +#define HD64461_PCC1CSCR (CONFIG_HD64461_IOBASE + 0x2014) /* socket 1 card status change */ +#define HD64461_PCC1CSCIER (CONFIG_HD64461_IOBASE + 0x2016) /* socket 1 card status change interrupt enable */ +#define HD64461_PCC1SCR (CONFIG_HD64461_IOBASE + 0x2018) /* socket 1 software control */ + +/* PCC Interface Status Register */ +#define HD64461_PCCISR_READY 0x80 /* card ready */ +#define HD64461_PCCISR_MWP 0x40 /* card write-protected */ +#define HD64461_PCCISR_VS2 0x20 /* voltage select pin 2 */ +#define HD64461_PCCISR_VS1 0x10 /* voltage select pin 1 */ +#define HD64461_PCCISR_CD2 0x08 /* card detect 2 */ +#define HD64461_PCCISR_CD1 0x04 /* card detect 1 */ +#define HD64461_PCCISR_BVD2 0x02 /* battery 1 */ +#define HD64461_PCCISR_BVD1 0x01 /* battery 1 */ + +#define HD64461_PCCISR_PCD_MASK 0x0c /* card detect */ +#define HD64461_PCCISR_BVD_MASK 0x03 /* battery voltage */ +#define HD64461_PCCISR_BVD_BATGOOD 0x03 /* battery good */ +#define HD64461_PCCISR_BVD_BATWARN 0x01 /* battery low warning */ +#define HD64461_PCCISR_BVD_BATDEAD1 0x02 /* battery dead */ +#define HD64461_PCCISR_BVD_BATDEAD2 0x00 /* battery dead */ + +/* PCC General Control Register */ +#define HD64461_PCCGCR_DRVE 0x80 /* output drive */ +#define HD64461_PCCGCR_PCCR 0x40 /* PC card reset */ +#define HD64461_PCCGCR_PCCT 0x20 /* PC card type, 1=IO&mem, 0=mem */ +#define HD64461_PCCGCR_VCC0 0x10 /* voltage control pin VCC0SEL0 */ +#define HD64461_PCCGCR_PMMOD 0x08 /* memory mode */ +#define HD64461_PCCGCR_PA25 0x04 /* pin A25 */ +#define HD64461_PCCGCR_PA24 0x02 /* pin A24 */ +#define HD64461_PCCGCR_REG 0x01 /* pin PCC0REG# */ + +/* PCC Card Status Change Register */ +#define HD64461_PCCCSCR_SCDI 0x80 /* sw card detect intr */ +#define HD64461_PCCCSCR_SRV1 0x40 /* reserved */ +#define HD64461_PCCCSCR_IREQ 0x20 /* IREQ intr req */ +#define HD64461_PCCCSCR_SC 0x10 /* STSCHG (status change) pin */ +#define HD64461_PCCCSCR_CDC 0x08 /* CD (card detect) change */ +#define HD64461_PCCCSCR_RC 0x04 /* READY change */ +#define HD64461_PCCCSCR_BW 0x02 /* battery warning change */ +#define HD64461_PCCCSCR_BD 0x01 /* battery dead change */ + +/* PCC Card Status Change Interrupt Enable Register */ +#define HD64461_PCCCSCIER_CRE 0x80 /* change reset enable */ +#define HD64461_PCCCSCIER_IREQE_MASK 0x60 /* IREQ enable */ +#define HD64461_PCCCSCIER_IREQE_DISABLED 0x00 /* IREQ disabled */ +#define HD64461_PCCCSCIER_IREQE_LEVEL 0x20 /* IREQ level-triggered */ +#define HD64461_PCCCSCIER_IREQE_FALLING 0x40 /* IREQ falling-edge-trig */ +#define HD64461_PCCCSCIER_IREQE_RISING 0x60 /* IREQ rising-edge-trig */ + +#define HD64461_PCCCSCIER_SCE 0x10 /* status change enable */ +#define HD64461_PCCCSCIER_CDE 0x08 /* card detect change enable */ +#define HD64461_PCCCSCIER_RE 0x04 /* ready change enable */ +#define HD64461_PCCCSCIER_BWE 0x02 /* battery warn change enable */ +#define HD64461_PCCCSCIER_BDE 0x01 /* battery dead change enable*/ + +/* PCC Software Control Register */ +#define HD64461_PCCSCR_VCC1 0x02 /* voltage control pin 1 */ +#define HD64461_PCCSCR_SWP 0x01 /* write protect */ + +/* PCC0 Output Pins Control Register */ +#define HD64461_P0OCR (CONFIG_HD64461_IOBASE + 0x202a) + +/* PCC1 Output Pins Control Register */ +#define HD64461_P1OCR (CONFIG_HD64461_IOBASE + 0x202c) + +/* PC Card General Control Register */ +#define HD64461_PGCR (CONFIG_HD64461_IOBASE + 0x202e) + +/* Port Control Registers */ +#define HD64461_GPACR (CONFIG_HD64461_IOBASE + 0x4000) /* Port A - Handles IRDA/TIMER */ +#define HD64461_GPBCR (CONFIG_HD64461_IOBASE + 0x4002) /* Port B - Handles UART */ +#define HD64461_GPCCR (CONFIG_HD64461_IOBASE + 0x4004) /* Port C - Handles PCMCIA 1 */ +#define HD64461_GPDCR (CONFIG_HD64461_IOBASE + 0x4006) /* Port D - Handles PCMCIA 1 */ + +/* Port Control Data Registers */ +#define HD64461_GPADR (CONFIG_HD64461_IOBASE + 0x4010) /* A */ +#define HD64461_GPBDR (CONFIG_HD64461_IOBASE + 0x4012) /* B */ +#define HD64461_GPCDR (CONFIG_HD64461_IOBASE + 0x4014) /* C */ +#define HD64461_GPDDR (CONFIG_HD64461_IOBASE + 0x4016) /* D */ + +/* Interrupt Control Registers */ +#define HD64461_GPAICR (CONFIG_HD64461_IOBASE + 0x4020) /* A */ +#define HD64461_GPBICR (CONFIG_HD64461_IOBASE + 0x4022) /* B */ +#define HD64461_GPCICR (CONFIG_HD64461_IOBASE + 0x4024) /* C */ +#define HD64461_GPDICR (CONFIG_HD64461_IOBASE + 0x4026) /* D */ + +/* Interrupt Status Registers */ +#define HD64461_GPAISR (CONFIG_HD64461_IOBASE + 0x4040) /* A */ +#define HD64461_GPBISR (CONFIG_HD64461_IOBASE + 0x4042) /* B */ +#define HD64461_GPCISR (CONFIG_HD64461_IOBASE + 0x4044) /* C */ +#define HD64461_GPDISR (CONFIG_HD64461_IOBASE + 0x4046) /* D */ + +/* Interrupt Request Register & Interrupt Mask Register */ +#define HD64461_NIRR (CONFIG_HD64461_IOBASE + 0x5000) +#define HD64461_NIMR (CONFIG_HD64461_IOBASE + 0x5002) + +#define HD64461_IRQBASE OFFCHIP_IRQ_BASE +#define OFFCHIP_IRQ_BASE 64 +#define HD64461_IRQ_NUM 16 + +#define HD64461_IRQ_UART (HD64461_IRQBASE+5) +#define HD64461_IRQ_IRDA (HD64461_IRQBASE+6) +#define HD64461_IRQ_TMU1 (HD64461_IRQBASE+9) +#define HD64461_IRQ_TMU0 (HD64461_IRQBASE+10) +#define HD64461_IRQ_GPIO (HD64461_IRQBASE+11) +#define HD64461_IRQ_AFE (HD64461_IRQBASE+12) +#define HD64461_IRQ_PCC1 (HD64461_IRQBASE+13) +#define HD64461_IRQ_PCC0 (HD64461_IRQBASE+14) + +#define __IO_PREFIX hd64461 +#include <asm/io_generic.h> + +/* arch/sh/cchips/hd6446x/hd64461/setup.c */ +int hd64461_irq_demux(int irq); +void hd64461_register_irq_demux(int irq, + int (*demux) (int irq, void *dev), void *dev); +void hd64461_unregister_irq_demux(int irq); + +#endif diff --git a/arch/sh/include/asm/hd64465/gpio.h b/arch/sh/include/asm/hd64465/gpio.h new file mode 100644 index 000000000000..a3cdca2713dd --- /dev/null +++ b/arch/sh/include/asm/hd64465/gpio.h @@ -0,0 +1,46 @@ +#ifndef _ASM_SH_HD64465_GPIO_ +#define _ASM_SH_HD64465_GPIO_ 1 +/* + * $Id: gpio.h,v 1.3 2003/05/04 19:30:14 lethal Exp $ + * + * Hitachi HD64465 companion chip: General Purpose IO pins support. + * This layer enables other device drivers to configure GPIO + * pins, get and set their values, and register an interrupt + * routine for when input pins change in hardware. + * + * by Greg Banks <gbanks@pocketpenguins.com> + * (c) 2000 PocketPenguins Inc. + */ +#include <asm/hd64465.h> + +/* Macro to construct a portpin number (used in all + * subsequent functions) from a port letter and a pin + * number, e.g. HD64465_GPIO_PORTPIN('A', 5). + */ +#define HD64465_GPIO_PORTPIN(port,pin) (((port)-'A')<<3|(pin)) + +/* Pin configuration constants for _configure() */ +#define HD64465_GPIO_FUNCTION2 0 /* use the pin's *other* function */ +#define HD64465_GPIO_OUT 1 /* output */ +#define HD64465_GPIO_IN_PULLUP 2 /* input, pull-up MOS on */ +#define HD64465_GPIO_IN 3 /* input */ + +/* Configure a pin's direction */ +extern void hd64465_gpio_configure(int portpin, int direction); + +/* Get, set value */ +extern void hd64465_gpio_set_pin(int portpin, unsigned int value); +extern unsigned int hd64465_gpio_get_pin(int portpin); +extern void hd64465_gpio_set_port(int port, unsigned int value); +extern unsigned int hd64465_gpio_get_port(int port); + +/* mode constants for _register_irq() */ +#define HD64465_GPIO_FALLING 0 +#define HD64465_GPIO_RISING 1 + +/* Interrupt on external value change */ +extern void hd64465_gpio_register_irq(int portpin, int mode, + void (*handler)(int portpin, void *dev), void *dev); +extern void hd64465_gpio_unregister_irq(int portpin); + +#endif /* _ASM_SH_HD64465_GPIO_ */ diff --git a/arch/sh/include/asm/hd64465/hd64465.h b/arch/sh/include/asm/hd64465/hd64465.h new file mode 100644 index 000000000000..cfd0e803d2a2 --- /dev/null +++ b/arch/sh/include/asm/hd64465/hd64465.h @@ -0,0 +1,256 @@ +#ifndef _ASM_SH_HD64465_ +#define _ASM_SH_HD64465_ 1 +/* + * $Id: hd64465.h,v 1.3 2003/05/04 19:30:15 lethal Exp $ + * + * Hitachi HD64465 companion chip support + * + * by Greg Banks <gbanks@pocketpenguins.com> + * (c) 2000 PocketPenguins Inc. + * + * Derived from <asm/hd64461.h> which bore the message: + * Copyright (C) 2000 YAEGASHI Takeshi + */ +#include <asm/io.h> +#include <asm/irq.h> + +/* + * Note that registers are defined here as virtual port numbers, + * which have no meaning except to get translated by hd64465_isa_port2addr() + * to an address in the range 0xb0000000-0xb3ffffff. Note that + * this translation happens to consist of adding the lower 16 bits + * of the virtual port number to 0xb0000000. Note also that the manual + * shows addresses as absolute physical addresses starting at 0x10000000, + * so e.g. the NIRR register is listed as 0x15000 here, 0x10005000 in the + * manual, and accessed using address 0xb0005000 - Greg. + */ + +/* System registers */ +#define HD64465_REG_SRR 0x1000c /* System Revision Register */ +#define HD64465_REG_SDID 0x10010 /* System Device ID Reg */ +#define HD64465_SDID 0x8122 /* 64465 device ID */ + +/* Power Management registers */ +#define HD64465_REG_SMSCR 0x10000 /* System Module Standby Control Reg */ +#define HD64465_SMSCR_PS2ST 0x4000 /* PS/2 Standby */ +#define HD64465_SMSCR_ADCST 0x1000 /* ADC Standby */ +#define HD64465_SMSCR_UARTST 0x0800 /* UART Standby */ +#define HD64465_SMSCR_SCDIST 0x0200 /* Serial Codec Standby */ +#define HD64465_SMSCR_PPST 0x0100 /* Parallel Port Standby */ +#define HD64465_SMSCR_PC0ST 0x0040 /* PCMCIA0 Standby */ +#define HD64465_SMSCR_PC1ST 0x0020 /* PCMCIA1 Standby */ +#define HD64465_SMSCR_AFEST 0x0010 /* AFE Standby */ +#define HD64465_SMSCR_TM0ST 0x0008 /* Timer0 Standby */ +#define HD64465_SMSCR_TM1ST 0x0004 /* Timer1 Standby */ +#define HD64465_SMSCR_IRDAST 0x0002 /* IRDA Standby */ +#define HD64465_SMSCR_KBCST 0x0001 /* Keyboard Controller Standby */ + +/* Interrupt Controller registers */ +#define HD64465_REG_NIRR 0x15000 /* Interrupt Request Register */ +#define HD64465_REG_NIMR 0x15002 /* Interrupt Mask Register */ +#define HD64465_REG_NITR 0x15004 /* Interrupt Trigger Mode Register */ + +/* Timer registers */ +#define HD64465_REG_TCVR1 0x16000 /* Timer 1 constant value register */ +#define HD64465_REG_TCVR0 0x16002 /* Timer 0 constant value register */ +#define HD64465_REG_TRVR1 0x16004 /* Timer 1 read value register */ +#define HD64465_REG_TRVR0 0x16006 /* Timer 0 read value register */ +#define HD64465_REG_TCR1 0x16008 /* Timer 1 control register */ +#define HD64465_REG_TCR0 0x1600A /* Timer 0 control register */ +#define HD64465_TCR_EADT 0x10 /* Enable ADTRIG# signal */ +#define HD64465_TCR_ETMO 0x08 /* Enable TMO signal */ +#define HD64465_TCR_PST_MASK 0x06 /* Clock Prescale */ +#define HD64465_TCR_PST_1 0x06 /* 1:1 */ +#define HD64465_TCR_PST_4 0x04 /* 1:4 */ +#define HD64465_TCR_PST_8 0x02 /* 1:8 */ +#define HD64465_TCR_PST_16 0x00 /* 1:16 */ +#define HD64465_TCR_TSTP 0x01 /* Start/Stop timer */ +#define HD64465_REG_TIRR 0x1600C /* Timer interrupt request register */ +#define HD64465_REG_TIDR 0x1600E /* Timer interrupt disable register */ +#define HD64465_REG_PWM1CS 0x16010 /* PWM 1 clock scale register */ +#define HD64465_REG_PWM1LPC 0x16012 /* PWM 1 low pulse width counter register */ +#define HD64465_REG_PWM1HPC 0x16014 /* PWM 1 high pulse width counter register */ +#define HD64465_REG_PWM0CS 0x16018 /* PWM 0 clock scale register */ +#define HD64465_REG_PWM0LPC 0x1601A /* PWM 0 low pulse width counter register */ +#define HD64465_REG_PWM0HPC 0x1601C /* PWM 0 high pulse width counter register */ + +/* Analog/Digital Converter registers */ +#define HD64465_REG_ADDRA 0x1E000 /* A/D data register A */ +#define HD64465_REG_ADDRB 0x1E002 /* A/D data register B */ +#define HD64465_REG_ADDRC 0x1E004 /* A/D data register C */ +#define HD64465_REG_ADDRD 0x1E006 /* A/D data register D */ +#define HD64465_REG_ADCSR 0x1E008 /* A/D control/status register */ +#define HD64465_ADCSR_ADF 0x80 /* A/D End Flag */ +#define HD64465_ADCSR_ADST 0x40 /* A/D Start Flag */ +#define HD64465_ADCSR_ADIS 0x20 /* A/D Interrupt Status */ +#define HD64465_ADCSR_TRGE 0x10 /* A/D Trigger Enable */ +#define HD64465_ADCSR_ADIE 0x08 /* A/D Interrupt Enable */ +#define HD64465_ADCSR_SCAN 0x04 /* A/D Scan Mode */ +#define HD64465_ADCSR_CH_MASK 0x03 /* A/D Channel */ +#define HD64465_REG_ADCALCR 0x1E00A /* A/D calibration sample control */ +#define HD64465_REG_ADCAL 0x1E00C /* A/D calibration data register */ + + +/* General Purpose I/O ports registers */ +#define HD64465_REG_GPACR 0x14000 /* Port A Control Register */ +#define HD64465_REG_GPBCR 0x14002 /* Port B Control Register */ +#define HD64465_REG_GPCCR 0x14004 /* Port C Control Register */ +#define HD64465_REG_GPDCR 0x14006 /* Port D Control Register */ +#define HD64465_REG_GPECR 0x14008 /* Port E Control Register */ +#define HD64465_REG_GPADR 0x14010 /* Port A Data Register */ +#define HD64465_REG_GPBDR 0x14012 /* Port B Data Register */ +#define HD64465_REG_GPCDR 0x14014 /* Port C Data Register */ +#define HD64465_REG_GPDDR 0x14016 /* Port D Data Register */ +#define HD64465_REG_GPEDR 0x14018 /* Port E Data Register */ +#define HD64465_REG_GPAICR 0x14020 /* Port A Interrupt Control Register */ +#define HD64465_REG_GPBICR 0x14022 /* Port B Interrupt Control Register */ +#define HD64465_REG_GPCICR 0x14024 /* Port C Interrupt Control Register */ +#define HD64465_REG_GPDICR 0x14026 /* Port D Interrupt Control Register */ +#define HD64465_REG_GPEICR 0x14028 /* Port E Interrupt Control Register */ +#define HD64465_REG_GPAISR 0x14040 /* Port A Interrupt Status Register */ +#define HD64465_REG_GPBISR 0x14042 /* Port B Interrupt Status Register */ +#define HD64465_REG_GPCISR 0x14044 /* Port C Interrupt Status Register */ +#define HD64465_REG_GPDISR 0x14046 /* Port D Interrupt Status Register */ +#define HD64465_REG_GPEISR 0x14048 /* Port E Interrupt Status Register */ + +/* PCMCIA bridge interface */ +#define HD64465_REG_PCC0ISR 0x12000 /* socket 0 interface status */ +#define HD64465_PCCISR_PREADY 0x80 /* mem card ready / io card IREQ */ +#define HD64465_PCCISR_PIREQ 0x80 +#define HD64465_PCCISR_PMWP 0x40 /* mem card write-protected */ +#define HD64465_PCCISR_PVS2 0x20 /* voltage select pin 2 */ +#define HD64465_PCCISR_PVS1 0x10 /* voltage select pin 1 */ +#define HD64465_PCCISR_PCD_MASK 0x0c /* card detect */ +#define HD64465_PCCISR_PBVD_MASK 0x03 /* battery voltage */ +#define HD64465_PCCISR_PBVD_BATGOOD 0x03 /* battery good */ +#define HD64465_PCCISR_PBVD_BATWARN 0x01 /* battery low warning */ +#define HD64465_PCCISR_PBVD_BATDEAD1 0x02 /* battery dead */ +#define HD64465_PCCISR_PBVD_BATDEAD2 0x00 /* battery dead */ +#define HD64465_REG_PCC0GCR 0x12002 /* socket 0 general control */ +#define HD64465_PCCGCR_PDRV 0x80 /* output drive */ +#define HD64465_PCCGCR_PCCR 0x40 /* PC card reset */ +#define HD64465_PCCGCR_PCCT 0x20 /* PC card type, 1=IO&mem, 0=mem */ +#define HD64465_PCCGCR_PVCC0 0x10 /* voltage control pin VCC0SEL0 */ +#define HD64465_PCCGCR_PMMOD 0x08 /* memory mode */ +#define HD64465_PCCGCR_PPA25 0x04 /* pin A25 */ +#define HD64465_PCCGCR_PPA24 0x02 /* pin A24 */ +#define HD64465_PCCGCR_PREG 0x01 /* ping PCC0REG# */ +#define HD64465_REG_PCC0CSCR 0x12004 /* socket 0 card status change */ +#define HD64465_PCCCSCR_PSCDI 0x80 /* sw card detect intr */ +#define HD64465_PCCCSCR_PSWSEL 0x40 /* power select */ +#define HD64465_PCCCSCR_PIREQ 0x20 /* IREQ intr req */ +#define HD64465_PCCCSCR_PSC 0x10 /* STSCHG (status change) pin */ +#define HD64465_PCCCSCR_PCDC 0x08 /* CD (card detect) change */ +#define HD64465_PCCCSCR_PRC 0x04 /* ready change */ +#define HD64465_PCCCSCR_PBW 0x02 /* battery warning change */ +#define HD64465_PCCCSCR_PBD 0x01 /* battery dead change */ +#define HD64465_REG_PCC0CSCIER 0x12006 /* socket 0 card status change interrupt enable */ +#define HD64465_PCCCSCIER_PCRE 0x80 /* change reset enable */ +#define HD64465_PCCCSCIER_PIREQE_MASK 0x60 /* IREQ enable */ +#define HD64465_PCCCSCIER_PIREQE_DISABLED 0x00 /* IREQ disabled */ +#define HD64465_PCCCSCIER_PIREQE_LEVEL 0x20 /* IREQ level-triggered */ +#define HD64465_PCCCSCIER_PIREQE_FALLING 0x40 /* IREQ falling-edge-trig */ +#define HD64465_PCCCSCIER_PIREQE_RISING 0x60 /* IREQ rising-edge-trig */ +#define HD64465_PCCCSCIER_PSCE 0x10 /* status change enable */ +#define HD64465_PCCCSCIER_PCDE 0x08 /* card detect change enable */ +#define HD64465_PCCCSCIER_PRE 0x04 /* ready change enable */ +#define HD64465_PCCCSCIER_PBWE 0x02 /* battery warn change enable */ +#define HD64465_PCCCSCIER_PBDE 0x01 /* battery dead change enable*/ +#define HD64465_REG_PCC0SCR 0x12008 /* socket 0 software control */ +#define HD64465_PCCSCR_SHDN 0x10 /* TPS2206 SHutDowN pin */ +#define HD64465_PCCSCR_SWP 0x01 /* write protect */ +#define HD64465_REG_PCCPSR 0x1200A /* serial power switch control */ +#define HD64465_REG_PCC1ISR 0x12010 /* socket 1 interface status */ +#define HD64465_REG_PCC1GCR 0x12012 /* socket 1 general control */ +#define HD64465_REG_PCC1CSCR 0x12014 /* socket 1 card status change */ +#define HD64465_REG_PCC1CSCIER 0x12016 /* socket 1 card status change interrupt enable */ +#define HD64465_REG_PCC1SCR 0x12018 /* socket 1 software control */ + + +/* PS/2 Keyboard and mouse controller -- *not* register compatible */ +#define HD64465_REG_KBCSR 0x1dc00 /* Keyboard Control/Status reg */ +#define HD64465_KBCSR_KBCIE 0x8000 /* KBCK Input Enable */ +#define HD64465_KBCSR_KBCOE 0x4000 /* KBCK Output Enable */ +#define HD64465_KBCSR_KBDOE 0x2000 /* KB DATA Output Enable */ +#define HD64465_KBCSR_KBCD 0x1000 /* KBCK Driven */ +#define HD64465_KBCSR_KBDD 0x0800 /* KB DATA Driven */ +#define HD64465_KBCSR_KBCS 0x0400 /* KBCK pin Status */ +#define HD64465_KBCSR_KBDS 0x0200 /* KB DATA pin Status */ +#define HD64465_KBCSR_KBDP 0x0100 /* KB DATA Parity bit */ +#define HD64465_KBCSR_KBD_MASK 0x00ff /* KD DATA shift reg */ +#define HD64465_REG_KBISR 0x1dc04 /* Keyboard Interrupt Status reg */ +#define HD64465_KBISR_KBRDF 0x0001 /* KB Received Data Full */ +#define HD64465_REG_MSCSR 0x1dc10 /* Mouse Control/Status reg */ +#define HD64465_REG_MSISR 0x1dc14 /* Mouse Interrupt Status reg */ + + +/* + * Logical address at which the HD64465 is mapped. Note that this + * should always be in the P2 segment (uncached and untranslated). + */ +#ifndef CONFIG_HD64465_IOBASE +#define CONFIG_HD64465_IOBASE 0xb0000000 +#endif +/* + * The HD64465 multiplexes all its modules' interrupts onto + * this single interrupt. + */ +#ifndef CONFIG_HD64465_IRQ +#define CONFIG_HD64465_IRQ 5 +#endif + + +#define _HD64465_IO_MASK 0xf8000000 +#define is_hd64465_addr(addr) \ + ((addr & _HD64465_IO_MASK) == (CONFIG_HD64465_IOBASE & _HD64465_IO_MASK)) + +/* + * A range of 16 virtual interrupts generated by + * demuxing the HD64465 muxed interrupt. + */ +#define HD64465_IRQ_BASE OFFCHIP_IRQ_BASE +#define HD64465_IRQ_NUM 16 +#define HD64465_IRQ_ADC (HD64465_IRQ_BASE+0) +#define HD64465_IRQ_USB (HD64465_IRQ_BASE+1) +#define HD64465_IRQ_SCDI (HD64465_IRQ_BASE+2) +#define HD64465_IRQ_PARALLEL (HD64465_IRQ_BASE+3) +/* bit 4 is reserved */ +#define HD64465_IRQ_UART (HD64465_IRQ_BASE+5) +#define HD64465_IRQ_IRDA (HD64465_IRQ_BASE+6) +#define HD64465_IRQ_PS2MOUSE (HD64465_IRQ_BASE+7) +#define HD64465_IRQ_KBC (HD64465_IRQ_BASE+8) +#define HD64465_IRQ_TIMER1 (HD64465_IRQ_BASE+9) +#define HD64465_IRQ_TIMER0 (HD64465_IRQ_BASE+10) +#define HD64465_IRQ_GPIO (HD64465_IRQ_BASE+11) +#define HD64465_IRQ_AFE (HD64465_IRQ_BASE+12) +#define HD64465_IRQ_PCMCIA1 (HD64465_IRQ_BASE+13) +#define HD64465_IRQ_PCMCIA0 (HD64465_IRQ_BASE+14) +#define HD64465_IRQ_PS2KBD (HD64465_IRQ_BASE+15) + +/* Constants for PCMCIA mappings */ +#define HD64465_PCC_WINDOW 0x01000000 + +#define HD64465_PCC0_BASE 0xb8000000 /* area 6 */ +#define HD64465_PCC0_ATTR (HD64465_PCC0_BASE) +#define HD64465_PCC0_COMM (HD64465_PCC0_BASE+HD64465_PCC_WINDOW) +#define HD64465_PCC0_IO (HD64465_PCC0_BASE+2*HD64465_PCC_WINDOW) + +#define HD64465_PCC1_BASE 0xb4000000 /* area 5 */ +#define HD64465_PCC1_ATTR (HD64465_PCC1_BASE) +#define HD64465_PCC1_COMM (HD64465_PCC1_BASE+HD64465_PCC_WINDOW) +#define HD64465_PCC1_IO (HD64465_PCC1_BASE+2*HD64465_PCC_WINDOW) + +/* + * Base of USB controller interface (as memory) + */ +#define HD64465_USB_BASE (CONFIG_HD64465_IOBASE+0xb000) +#define HD64465_USB_LEN 0x1000 +/* + * Base of embedded SRAM, used for USB controller. + */ +#define HD64465_SRAM_BASE (CONFIG_HD64465_IOBASE+0x9000) +#define HD64465_SRAM_LEN 0x1000 + + + +#endif /* _ASM_SH_HD64465_ */ diff --git a/arch/sh/include/asm/hd64465/io.h b/arch/sh/include/asm/hd64465/io.h new file mode 100644 index 000000000000..139f1472e5bb --- /dev/null +++ b/arch/sh/include/asm/hd64465/io.h @@ -0,0 +1,44 @@ +/* + * include/asm-sh/hd64465/io.h + * + * By Greg Banks <gbanks@pocketpenguins.com> + * (c) 2000 PocketPenguins Inc. + * + * Derived from io_hd64461.h, which bore the message: + * Copyright 2000 Stuart Menefy (stuart.menefy@st.com) + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + * + * IO functions for an HD64465 "Windows CE Intelligent Peripheral Controller". + */ + +#ifndef _ASM_SH_IO_HD64465_H +#define _ASM_SH_IO_HD64465_H + +extern unsigned char hd64465_inb(unsigned long port); +extern unsigned short hd64465_inw(unsigned long port); +extern unsigned int hd64465_inl(unsigned long port); + +extern void hd64465_outb(unsigned char value, unsigned long port); +extern void hd64465_outw(unsigned short value, unsigned long port); +extern void hd64465_outl(unsigned int value, unsigned long port); + +extern unsigned char hd64465_inb_p(unsigned long port); +extern void hd64465_outb_p(unsigned char value, unsigned long port); + +extern unsigned long hd64465_isa_port2addr(unsigned long offset); +extern int hd64465_irq_demux(int irq); +/* Provision for generic secondary demux step -- used by PCMCIA code */ +extern void hd64465_register_irq_demux(int irq, + int (*demux)(int irq, void *dev), void *dev); +extern void hd64465_unregister_irq_demux(int irq); +/* Set this variable to 1 to see port traffic */ +extern int hd64465_io_debug; +/* Map a range of ports to a range of kernel virtual memory. + */ +extern void hd64465_port_map(unsigned short baseport, unsigned int nports, + unsigned long addr, unsigned char shift); +extern void hd64465_port_unmap(unsigned short baseport, unsigned int nports); + +#endif /* _ASM_SH_IO_HD64465_H */ diff --git a/arch/sh/include/asm/heartbeat.h b/arch/sh/include/asm/heartbeat.h new file mode 100644 index 000000000000..724a43ed245e --- /dev/null +++ b/arch/sh/include/asm/heartbeat.h @@ -0,0 +1,17 @@ +#ifndef __ASM_SH_HEARTBEAT_H +#define __ASM_SH_HEARTBEAT_H + +#include <linux/timer.h> + +#define HEARTBEAT_INVERTED (1 << 0) + +struct heartbeat_data { + void __iomem *base; + unsigned char *bit_pos; + unsigned int nr_bits; + struct timer_list timer; + unsigned int regsize; + unsigned long flags; +}; + +#endif /* __ASM_SH_HEARTBEAT_H */ diff --git a/arch/sh/include/asm/hp6xx.h b/arch/sh/include/asm/hp6xx.h new file mode 100644 index 000000000000..0d4165a32dcd --- /dev/null +++ b/arch/sh/include/asm/hp6xx.h @@ -0,0 +1,58 @@ +#ifndef __ASM_SH_HP6XX_H +#define __ASM_SH_HP6XX_H + +/* + * Copyright (C) 2003, 2004, 2005 Andriy Skulysh + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + */ + +#define HP680_BTN_IRQ 32 /* IRQ0_IRQ */ +#define HP680_TS_IRQ 35 /* IRQ3_IRQ */ +#define HP680_HD64461_IRQ 36 /* IRQ4_IRQ */ + +#define DAC_LCD_BRIGHTNESS 0 +#define DAC_SPEAKER_VOLUME 1 + +#define PGDR_OPENED 0x01 +#define PGDR_MAIN_BATTERY_OUT 0x04 +#define PGDR_PLAY_BUTTON 0x08 +#define PGDR_REWIND_BUTTON 0x10 +#define PGDR_RECORD_BUTTON 0x20 + +#define PHDR_TS_PEN_DOWN 0x08 + +#define PJDR_LED_BLINK 0x02 + +#define PKDR_LED_GREEN 0x10 + +#define SCPDR_TS_SCAN_ENABLE 0x20 +#define SCPDR_TS_SCAN_Y 0x02 +#define SCPDR_TS_SCAN_X 0x01 + +#define SCPCR_TS_ENABLE 0x405 +#define SCPCR_TS_MASK 0xc0f + +#define ADC_CHANNEL_TS_Y 1 +#define ADC_CHANNEL_TS_X 2 +#define ADC_CHANNEL_BATTERY 3 +#define ADC_CHANNEL_BACKUP 4 +#define ADC_CHANNEL_CHARGE 5 + +#define HD64461_GPADR_SPEAKER 0x01 +#define HD64461_GPADR_PCMCIA0 (0x02|0x08) + +#define HD64461_GPBDR_LCDOFF 0x01 +#define HD64461_GPBDR_LCD_CONTRAST_MASK 0x78 +#define HD64461_GPBDR_LED_RED 0x80 + +#include <asm/hd64461.h> +#include <asm/io.h> + +#define PJDR 0xa4000130 +#define PKDR 0xa4000132 + +#endif /* __ASM_SH_HP6XX_H */ diff --git a/arch/sh/include/asm/hugetlb.h b/arch/sh/include/asm/hugetlb.h new file mode 100644 index 000000000000..967068fb79ac --- /dev/null +++ b/arch/sh/include/asm/hugetlb.h @@ -0,0 +1,92 @@ +#ifndef _ASM_SH_HUGETLB_H +#define _ASM_SH_HUGETLB_H + +#include <asm/page.h> + + +static inline int is_hugepage_only_range(struct mm_struct *mm, + unsigned long addr, + unsigned long len) { + return 0; +} + +/* + * If the arch doesn't supply something else, assume that hugepage + * size aligned regions are ok without further preparation. + */ +static inline int prepare_hugepage_range(struct file *file, + unsigned long addr, unsigned long len) +{ + if (len & ~HPAGE_MASK) + return -EINVAL; + if (addr & ~HPAGE_MASK) + return -EINVAL; + return 0; +} + +static inline void hugetlb_prefault_arch_hook(struct mm_struct *mm) { +} + +static inline void hugetlb_free_pgd_range(struct mmu_gather *tlb, + unsigned long addr, unsigned long end, + unsigned long floor, + unsigned long ceiling) +{ + free_pgd_range(tlb, addr, end, floor, ceiling); +} + +static inline void set_huge_pte_at(struct mm_struct *mm, unsigned long addr, + pte_t *ptep, pte_t pte) +{ + set_pte_at(mm, addr, ptep, pte); +} + +static inline pte_t huge_ptep_get_and_clear(struct mm_struct *mm, + unsigned long addr, pte_t *ptep) +{ + return ptep_get_and_clear(mm, addr, ptep); +} + +static inline void huge_ptep_clear_flush(struct vm_area_struct *vma, + unsigned long addr, pte_t *ptep) +{ +} + +static inline int huge_pte_none(pte_t pte) +{ + return pte_none(pte); +} + +static inline pte_t huge_pte_wrprotect(pte_t pte) +{ + return pte_wrprotect(pte); +} + +static inline void huge_ptep_set_wrprotect(struct mm_struct *mm, + unsigned long addr, pte_t *ptep) +{ + ptep_set_wrprotect(mm, addr, ptep); +} + +static inline int huge_ptep_set_access_flags(struct vm_area_struct *vma, + unsigned long addr, pte_t *ptep, + pte_t pte, int dirty) +{ + return ptep_set_access_flags(vma, addr, ptep, pte, dirty); +} + +static inline pte_t huge_ptep_get(pte_t *ptep) +{ + return *ptep; +} + +static inline int arch_prepare_hugepage(struct page *page) +{ + return 0; +} + +static inline void arch_release_hugepage(struct page *page) +{ +} + +#endif /* _ASM_SH_HUGETLB_H */ diff --git a/arch/sh/include/asm/hw_irq.h b/arch/sh/include/asm/hw_irq.h new file mode 100644 index 000000000000..d557b00111bf --- /dev/null +++ b/arch/sh/include/asm/hw_irq.h @@ -0,0 +1,123 @@ +#ifndef __ASM_SH_HW_IRQ_H +#define __ASM_SH_HW_IRQ_H + +#include <linux/init.h> +#include <asm/atomic.h> + +extern atomic_t irq_err_count; + +struct ipr_data { + unsigned char irq; + unsigned char ipr_idx; /* Index for the IPR registered */ + unsigned char shift; /* Number of bits to shift the data */ + unsigned char priority; /* The priority */ +}; + +struct ipr_desc { + unsigned long *ipr_offsets; + unsigned int nr_offsets; + struct ipr_data *ipr_data; + unsigned int nr_irqs; + struct irq_chip chip; +}; + +void register_ipr_controller(struct ipr_desc *); + +typedef unsigned char intc_enum; + +struct intc_vect { + intc_enum enum_id; + unsigned short vect; +}; + +#define INTC_VECT(enum_id, vect) { enum_id, vect } +#define INTC_IRQ(enum_id, irq) INTC_VECT(enum_id, irq2evt(irq)) + +struct intc_group { + intc_enum enum_id; + intc_enum enum_ids[32]; +}; + +#define INTC_GROUP(enum_id, ids...) { enum_id, { ids } } + +struct intc_mask_reg { + unsigned long set_reg, clr_reg, reg_width; + intc_enum enum_ids[32]; +#ifdef CONFIG_SMP + unsigned long smp; +#endif +}; + +struct intc_prio_reg { + unsigned long set_reg, clr_reg, reg_width, field_width; + intc_enum enum_ids[16]; +#ifdef CONFIG_SMP + unsigned long smp; +#endif +}; + +struct intc_sense_reg { + unsigned long reg, reg_width, field_width; + intc_enum enum_ids[16]; +}; + +#ifdef CONFIG_SMP +#define INTC_SMP(stride, nr) .smp = (stride) | ((nr) << 8) +#else +#define INTC_SMP(stride, nr) +#endif + +struct intc_desc { + struct intc_vect *vectors; + unsigned int nr_vectors; + struct intc_group *groups; + unsigned int nr_groups; + struct intc_mask_reg *mask_regs; + unsigned int nr_mask_regs; + struct intc_prio_reg *prio_regs; + unsigned int nr_prio_regs; + struct intc_sense_reg *sense_regs; + unsigned int nr_sense_regs; + char *name; +#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4A) + struct intc_mask_reg *ack_regs; + unsigned int nr_ack_regs; +#endif +}; + +#define _INTC_ARRAY(a) a, sizeof(a)/sizeof(*a) +#define DECLARE_INTC_DESC(symbol, chipname, vectors, groups, \ + mask_regs, prio_regs, sense_regs) \ +struct intc_desc symbol __initdata = { \ + _INTC_ARRAY(vectors), _INTC_ARRAY(groups), \ + _INTC_ARRAY(mask_regs), _INTC_ARRAY(prio_regs), \ + _INTC_ARRAY(sense_regs), \ + chipname, \ +} + +#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4A) +#define DECLARE_INTC_DESC_ACK(symbol, chipname, vectors, groups, \ + mask_regs, prio_regs, sense_regs, ack_regs) \ +struct intc_desc symbol __initdata = { \ + _INTC_ARRAY(vectors), _INTC_ARRAY(groups), \ + _INTC_ARRAY(mask_regs), _INTC_ARRAY(prio_regs), \ + _INTC_ARRAY(sense_regs), \ + chipname, \ + _INTC_ARRAY(ack_regs), \ +} +#endif + +void __init register_intc_controller(struct intc_desc *desc); +int intc_set_priority(unsigned int irq, unsigned int prio); + +void __init plat_irq_setup(void); +#ifdef CONFIG_CPU_SH3 +void __init plat_irq_setup_sh3(void); +#endif + +enum { IRQ_MODE_IRQ, IRQ_MODE_IRQ7654, IRQ_MODE_IRQ3210, + IRQ_MODE_IRL7654_MASK, IRQ_MODE_IRL3210_MASK, + IRQ_MODE_IRL7654, IRQ_MODE_IRL3210 }; +void __init plat_irq_setup_pins(int mode); + +#endif /* __ASM_SH_HW_IRQ_H */ diff --git a/arch/sh/include/asm/i2c-sh7760.h b/arch/sh/include/asm/i2c-sh7760.h new file mode 100644 index 000000000000..24182116711f --- /dev/null +++ b/arch/sh/include/asm/i2c-sh7760.h @@ -0,0 +1,22 @@ +/* + * MMIO/IRQ and platform data for SH7760 I2C channels + */ + +#ifndef _I2C_SH7760_H_ +#define _I2C_SH7760_H_ + +#define SH7760_I2C_DEVNAME "sh7760-i2c" + +#define SH7760_I2C0_MMIO 0xFE140000 +#define SH7760_I2C0_MMIOEND 0xFE14003B +#define SH7760_I2C0_IRQ 62 + +#define SH7760_I2C1_MMIO 0xFE150000 +#define SH7760_I2C1_MMIOEND 0xFE15003B +#define SH7760_I2C1_IRQ 63 + +struct sh7760_i2c_platdata { + unsigned int speed_khz; +}; + +#endif diff --git a/arch/sh/include/asm/ilsel.h b/arch/sh/include/asm/ilsel.h new file mode 100644 index 000000000000..e3d304b280f6 --- /dev/null +++ b/arch/sh/include/asm/ilsel.h @@ -0,0 +1,45 @@ +#ifndef __ASM_SH_ILSEL_H +#define __ASM_SH_ILSEL_H + +typedef enum { + ILSEL_NONE, + ILSEL_LAN, + ILSEL_USBH_I, + ILSEL_USBH_S, + ILSEL_USBH_V, + ILSEL_RTC, + ILSEL_USBP_I, + ILSEL_USBP_S, + ILSEL_USBP_V, + ILSEL_KEY, + + /* + * ILSEL Aliases - corner cases for interleaved level tables. + * + * Someone thought this was a good idea and less hassle than + * demuxing a shared vector, really. + */ + + /* ILSEL0 and 2 */ + ILSEL_FPGA0, + ILSEL_FPGA1, + ILSEL_EX1, + ILSEL_EX2, + ILSEL_EX3, + ILSEL_EX4, + + /* ILSEL1 and 3 */ + ILSEL_FPGA2 = ILSEL_FPGA0, + ILSEL_FPGA3 = ILSEL_FPGA1, + ILSEL_EX5 = ILSEL_EX1, + ILSEL_EX6 = ILSEL_EX2, + ILSEL_EX7 = ILSEL_EX3, + ILSEL_EX8 = ILSEL_EX4, +} ilsel_source_t; + +/* arch/sh/boards/renesas/x3proto/ilsel.c */ +int ilsel_enable(ilsel_source_t set); +int ilsel_enable_fixed(ilsel_source_t set, unsigned int level); +void ilsel_disable(unsigned int irq); + +#endif /* __ASM_SH_ILSEL_H */ diff --git a/arch/sh/include/asm/io.h b/arch/sh/include/asm/io.h new file mode 100644 index 000000000000..a4fbf0c84fb1 --- /dev/null +++ b/arch/sh/include/asm/io.h @@ -0,0 +1,366 @@ +#ifndef __ASM_SH_IO_H +#define __ASM_SH_IO_H + +/* + * Convention: + * read{b,w,l}/write{b,w,l} are for PCI, + * while in{b,w,l}/out{b,w,l} are for ISA + * These may (will) be platform specific function. + * In addition we have 'pausing' versions: in{b,w,l}_p/out{b,w,l}_p + * and 'string' versions: ins{b,w,l}/outs{b,w,l} + * For read{b,w,l} and write{b,w,l} there are also __raw versions, which + * do not have a memory barrier after them. + * + * In addition, we have + * ctrl_in{b,w,l}/ctrl_out{b,w,l} for SuperH specific I/O. + * which are processor specific. + */ + +/* + * We follow the Alpha convention here: + * __inb expands to an inline function call (which calls via the mv) + * _inb is a real function call (note ___raw fns are _ version of __raw) + * inb by default expands to _inb, but the machine specific code may + * define it to __inb if it chooses. + */ +#include <asm/cache.h> +#include <asm/system.h> +#include <asm/addrspace.h> +#include <asm/machvec.h> +#include <asm/pgtable.h> +#include <asm-generic/iomap.h> + +#ifdef __KERNEL__ + +/* + * Depending on which platform we are running on, we need different + * I/O functions. + */ +#define __IO_PREFIX generic +#include <asm/io_generic.h> +#include <asm/io_trapped.h> + +#define maybebadio(port) \ + printk(KERN_ERR "bad PC-like io %s:%u for port 0x%lx at 0x%08x\n", \ + __FUNCTION__, __LINE__, (port), (u32)__builtin_return_address(0)) + +/* + * Since boards are able to define their own set of I/O routines through + * their respective machine vector, we always wrap through the mv. + * + * Also, in the event that a board hasn't provided its own definition for + * a given routine, it will be wrapped to generic code at run-time. + */ + +#define __inb(p) sh_mv.mv_inb((p)) +#define __inw(p) sh_mv.mv_inw((p)) +#define __inl(p) sh_mv.mv_inl((p)) +#define __outb(x,p) sh_mv.mv_outb((x),(p)) +#define __outw(x,p) sh_mv.mv_outw((x),(p)) +#define __outl(x,p) sh_mv.mv_outl((x),(p)) + +#define __inb_p(p) sh_mv.mv_inb_p((p)) +#define __inw_p(p) sh_mv.mv_inw_p((p)) +#define __inl_p(p) sh_mv.mv_inl_p((p)) +#define __outb_p(x,p) sh_mv.mv_outb_p((x),(p)) +#define __outw_p(x,p) sh_mv.mv_outw_p((x),(p)) +#define __outl_p(x,p) sh_mv.mv_outl_p((x),(p)) + +#define __insb(p,b,c) sh_mv.mv_insb((p), (b), (c)) +#define __insw(p,b,c) sh_mv.mv_insw((p), (b), (c)) +#define __insl(p,b,c) sh_mv.mv_insl((p), (b), (c)) +#define __outsb(p,b,c) sh_mv.mv_outsb((p), (b), (c)) +#define __outsw(p,b,c) sh_mv.mv_outsw((p), (b), (c)) +#define __outsl(p,b,c) sh_mv.mv_outsl((p), (b), (c)) + +#define __readb(a) sh_mv.mv_readb((a)) +#define __readw(a) sh_mv.mv_readw((a)) +#define __readl(a) sh_mv.mv_readl((a)) +#define __writeb(v,a) sh_mv.mv_writeb((v),(a)) +#define __writew(v,a) sh_mv.mv_writew((v),(a)) +#define __writel(v,a) sh_mv.mv_writel((v),(a)) + +#define inb __inb +#define inw __inw +#define inl __inl +#define outb __outb +#define outw __outw +#define outl __outl + +#define inb_p __inb_p +#define inw_p __inw_p +#define inl_p __inl_p +#define outb_p __outb_p +#define outw_p __outw_p +#define outl_p __outl_p + +#define insb __insb +#define insw __insw +#define insl __insl +#define outsb __outsb +#define outsw __outsw +#define outsl __outsl + +#define __raw_readb(a) __readb((void __iomem *)(a)) +#define __raw_readw(a) __readw((void __iomem *)(a)) +#define __raw_readl(a) __readl((void __iomem *)(a)) +#define __raw_writeb(v, a) __writeb(v, (void __iomem *)(a)) +#define __raw_writew(v, a) __writew(v, (void __iomem *)(a)) +#define __raw_writel(v, a) __writel(v, (void __iomem *)(a)) + +void __raw_writesl(unsigned long addr, const void *data, int longlen); +void __raw_readsl(unsigned long addr, void *data, int longlen); + +/* + * The platform header files may define some of these macros to use + * the inlined versions where appropriate. These macros may also be + * redefined by userlevel programs. + */ +#ifdef __readb +# define readb(a) ({ unsigned int r_ = __raw_readb(a); mb(); r_; }) +#endif +#ifdef __raw_readw +# define readw(a) ({ unsigned int r_ = __raw_readw(a); mb(); r_; }) +#endif +#ifdef __raw_readl +# define readl(a) ({ unsigned int r_ = __raw_readl(a); mb(); r_; }) +#endif + +#ifdef __raw_writeb +# define writeb(v,a) ({ __raw_writeb((v),(a)); mb(); }) +#endif +#ifdef __raw_writew +# define writew(v,a) ({ __raw_writew((v),(a)); mb(); }) +#endif +#ifdef __raw_writel +# define writel(v,a) ({ __raw_writel((v),(a)); mb(); }) +#endif + +#define __BUILD_MEMORY_STRING(bwlq, type) \ + \ +static inline void writes##bwlq(volatile void __iomem *mem, \ + const void *addr, unsigned int count) \ +{ \ + const volatile type *__addr = addr; \ + \ + while (count--) { \ + __raw_write##bwlq(*__addr, mem); \ + __addr++; \ + } \ +} \ + \ +static inline void reads##bwlq(volatile void __iomem *mem, void *addr, \ + unsigned int count) \ +{ \ + volatile type *__addr = addr; \ + \ + while (count--) { \ + *__addr = __raw_read##bwlq(mem); \ + __addr++; \ + } \ +} + +__BUILD_MEMORY_STRING(b, u8) +__BUILD_MEMORY_STRING(w, u16) +#define writesl __raw_writesl +#define readsl __raw_readsl + +#define readb_relaxed(a) readb(a) +#define readw_relaxed(a) readw(a) +#define readl_relaxed(a) readl(a) + +/* Simple MMIO */ +#define ioread8(a) readb(a) +#define ioread16(a) readw(a) +#define ioread16be(a) be16_to_cpu(__raw_readw((a))) +#define ioread32(a) readl(a) +#define ioread32be(a) be32_to_cpu(__raw_readl((a))) + +#define iowrite8(v,a) writeb((v),(a)) +#define iowrite16(v,a) writew((v),(a)) +#define iowrite16be(v,a) __raw_writew(cpu_to_be16((v)),(a)) +#define iowrite32(v,a) writel((v),(a)) +#define iowrite32be(v,a) __raw_writel(cpu_to_be32((v)),(a)) + +#define ioread8_rep(a, d, c) readsb((a), (d), (c)) +#define ioread16_rep(a, d, c) readsw((a), (d), (c)) +#define ioread32_rep(a, d, c) readsl((a), (d), (c)) + +#define iowrite8_rep(a, s, c) writesb((a), (s), (c)) +#define iowrite16_rep(a, s, c) writesw((a), (s), (c)) +#define iowrite32_rep(a, s, c) writesl((a), (s), (c)) + +#define mmiowb() wmb() /* synco on SH-4A, otherwise a nop */ + +#define IO_SPACE_LIMIT 0xffffffff + +/* + * This function provides a method for the generic case where a board-specific + * ioport_map simply needs to return the port + some arbitrary port base. + * + * We use this at board setup time to implicitly set the port base, and + * as a result, we can use the generic ioport_map. + */ +static inline void __set_io_port_base(unsigned long pbase) +{ + extern unsigned long generic_io_base; + + generic_io_base = pbase; +} + +#define __ioport_map(p, n) sh_mv.mv_ioport_map((p), (n)) + +/* We really want to try and get these to memcpy etc */ +extern void memcpy_fromio(void *, volatile void __iomem *, unsigned long); +extern void memcpy_toio(volatile void __iomem *, const void *, unsigned long); +extern void memset_io(volatile void __iomem *, int, unsigned long); + +/* SuperH on-chip I/O functions */ +static inline unsigned char ctrl_inb(unsigned long addr) +{ + return *(volatile unsigned char*)addr; +} + +static inline unsigned short ctrl_inw(unsigned long addr) +{ + return *(volatile unsigned short*)addr; +} + +static inline unsigned int ctrl_inl(unsigned long addr) +{ + return *(volatile unsigned long*)addr; +} + +static inline unsigned long long ctrl_inq(unsigned long addr) +{ + return *(volatile unsigned long long*)addr; +} + +static inline void ctrl_outb(unsigned char b, unsigned long addr) +{ + *(volatile unsigned char*)addr = b; +} + +static inline void ctrl_outw(unsigned short b, unsigned long addr) +{ + *(volatile unsigned short*)addr = b; +} + +static inline void ctrl_outl(unsigned int b, unsigned long addr) +{ + *(volatile unsigned long*)addr = b; +} + +static inline void ctrl_outq(unsigned long long b, unsigned long addr) +{ + *(volatile unsigned long long*)addr = b; +} + +static inline void ctrl_delay(void) +{ +#ifdef P2SEG + ctrl_inw(P2SEG); +#endif +} + +/* Quad-word real-mode I/O, don't ask.. */ +unsigned long long peek_real_address_q(unsigned long long addr); +unsigned long long poke_real_address_q(unsigned long long addr, + unsigned long long val); + +#if !defined(CONFIG_MMU) +#define virt_to_phys(address) ((unsigned long)(address)) +#define phys_to_virt(address) ((void *)(address)) +#else +#define virt_to_phys(address) (__pa(address)) +#define phys_to_virt(address) (__va(address)) +#endif + +/* + * On 32-bit SH, we traditionally have the whole physical address space + * mapped at all times (as MIPS does), so "ioremap()" and "iounmap()" do + * not need to do anything but place the address in the proper segment. + * This is true for P1 and P2 addresses, as well as some P3 ones. + * However, most of the P3 addresses and newer cores using extended + * addressing need to map through page tables, so the ioremap() + * implementation becomes a bit more complicated. + * + * See arch/sh/mm/ioremap.c for additional notes on this. + * + * We cheat a bit and always return uncachable areas until we've fixed + * the drivers to handle caching properly. + * + * On the SH-5 the concept of segmentation in the 1:1 PXSEG sense simply + * doesn't exist, so everything must go through page tables. + */ +#ifdef CONFIG_MMU +void __iomem *__ioremap(unsigned long offset, unsigned long size, + unsigned long flags); +void __iounmap(void __iomem *addr); + +/* arch/sh/mm/ioremap_64.c */ +unsigned long onchip_remap(unsigned long addr, unsigned long size, + const char *name); +extern void onchip_unmap(unsigned long vaddr); +#else +#define __ioremap(offset, size, flags) ((void __iomem *)(offset)) +#define __iounmap(addr) do { } while (0) +#define onchip_remap(addr, size, name) (addr) +#define onchip_unmap(addr) do { } while (0) +#endif /* CONFIG_MMU */ + +static inline void __iomem * +__ioremap_mode(unsigned long offset, unsigned long size, unsigned long flags) +{ +#ifdef CONFIG_SUPERH32 + unsigned long last_addr = offset + size - 1; +#endif + void __iomem *ret; + + ret = __ioremap_trapped(offset, size); + if (ret) + return ret; + +#ifdef CONFIG_SUPERH32 + /* + * For P1 and P2 space this is trivial, as everything is already + * mapped. Uncached access for P1 addresses are done through P2. + * In the P3 case or for addresses outside of the 29-bit space, + * mapping must be done by the PMB or by using page tables. + */ + if (likely(PXSEG(offset) < P3SEG && PXSEG(last_addr) < P3SEG)) { + if (unlikely(flags & _PAGE_CACHABLE)) + return (void __iomem *)P1SEGADDR(offset); + + return (void __iomem *)P2SEGADDR(offset); + } +#endif + + return __ioremap(offset, size, flags); +} + +#define ioremap(offset, size) \ + __ioremap_mode((offset), (size), 0) +#define ioremap_nocache(offset, size) \ + __ioremap_mode((offset), (size), 0) +#define ioremap_cache(offset, size) \ + __ioremap_mode((offset), (size), _PAGE_CACHABLE) +#define p3_ioremap(offset, size, flags) \ + __ioremap((offset), (size), (flags)) +#define iounmap(addr) \ + __iounmap((addr)) + +/* + * Convert a physical pointer to a virtual kernel pointer for /dev/mem + * access + */ +#define xlate_dev_mem_ptr(p) __va(p) + +/* + * Convert a virtual cached pointer to an uncached pointer + */ +#define xlate_dev_kmem_ptr(p) p + +#endif /* __KERNEL__ */ + +#endif /* __ASM_SH_IO_H */ diff --git a/arch/sh/include/asm/io_generic.h b/arch/sh/include/asm/io_generic.h new file mode 100644 index 000000000000..92fc6070d7b3 --- /dev/null +++ b/arch/sh/include/asm/io_generic.h @@ -0,0 +1,49 @@ +/* + * Trivial I/O routine definitions, intentionally meant to be included + * multiple times. Ugly I/O routine concatenation helpers taken from + * alpha. Must be included _before_ io.h to avoid preprocessor-induced + * routine mismatch. + */ +#define IO_CONCAT(a,b) _IO_CONCAT(a,b) +#define _IO_CONCAT(a,b) a ## _ ## b + +#ifndef __IO_PREFIX +#error "Don't include this header without a valid system prefix" +#endif + +u8 IO_CONCAT(__IO_PREFIX,inb)(unsigned long); +u16 IO_CONCAT(__IO_PREFIX,inw)(unsigned long); +u32 IO_CONCAT(__IO_PREFIX,inl)(unsigned long); + +void IO_CONCAT(__IO_PREFIX,outb)(u8, unsigned long); +void IO_CONCAT(__IO_PREFIX,outw)(u16, unsigned long); +void IO_CONCAT(__IO_PREFIX,outl)(u32, unsigned long); + +u8 IO_CONCAT(__IO_PREFIX,inb_p)(unsigned long); +u16 IO_CONCAT(__IO_PREFIX,inw_p)(unsigned long); +u32 IO_CONCAT(__IO_PREFIX,inl_p)(unsigned long); +void IO_CONCAT(__IO_PREFIX,outb_p)(u8, unsigned long); +void IO_CONCAT(__IO_PREFIX,outw_p)(u16, unsigned long); +void IO_CONCAT(__IO_PREFIX,outl_p)(u32, unsigned long); + +void IO_CONCAT(__IO_PREFIX,insb)(unsigned long, void *dst, unsigned long count); +void IO_CONCAT(__IO_PREFIX,insw)(unsigned long, void *dst, unsigned long count); +void IO_CONCAT(__IO_PREFIX,insl)(unsigned long, void *dst, unsigned long count); +void IO_CONCAT(__IO_PREFIX,outsb)(unsigned long, const void *src, unsigned long count); +void IO_CONCAT(__IO_PREFIX,outsw)(unsigned long, const void *src, unsigned long count); +void IO_CONCAT(__IO_PREFIX,outsl)(unsigned long, const void *src, unsigned long count); + +u8 IO_CONCAT(__IO_PREFIX,readb)(void __iomem *); +u16 IO_CONCAT(__IO_PREFIX,readw)(void __iomem *); +u32 IO_CONCAT(__IO_PREFIX,readl)(void __iomem *); +void IO_CONCAT(__IO_PREFIX,writeb)(u8, void __iomem *); +void IO_CONCAT(__IO_PREFIX,writew)(u16, void __iomem *); +void IO_CONCAT(__IO_PREFIX,writel)(u32, void __iomem *); + +void *IO_CONCAT(__IO_PREFIX,ioremap)(unsigned long offset, unsigned long size); +void IO_CONCAT(__IO_PREFIX,iounmap)(void *addr); + +void __iomem *IO_CONCAT(__IO_PREFIX,ioport_map)(unsigned long addr, unsigned int size); +void IO_CONCAT(__IO_PREFIX,ioport_unmap)(void __iomem *addr); + +#undef __IO_PREFIX diff --git a/arch/sh/include/asm/io_trapped.h b/arch/sh/include/asm/io_trapped.h new file mode 100644 index 000000000000..f1251d4f0ba9 --- /dev/null +++ b/arch/sh/include/asm/io_trapped.h @@ -0,0 +1,58 @@ +#ifndef __ASM_SH_IO_TRAPPED_H +#define __ASM_SH_IO_TRAPPED_H + +#include <linux/list.h> +#include <linux/ioport.h> +#include <asm/page.h> + +#define IO_TRAPPED_MAGIC 0xfeedbeef + +struct trapped_io { + unsigned int magic; + struct resource *resource; + unsigned int num_resources; + unsigned int minimum_bus_width; + struct list_head list; + void __iomem *virt_base; +} __aligned(PAGE_SIZE); + +#ifdef CONFIG_IO_TRAPPED +int register_trapped_io(struct trapped_io *tiop); +int handle_trapped_io(struct pt_regs *regs, unsigned long address); + +void __iomem *match_trapped_io_handler(struct list_head *list, + unsigned long offset, + unsigned long size); + +#ifdef CONFIG_HAS_IOMEM +extern struct list_head trapped_mem; + +static inline void __iomem * +__ioremap_trapped(unsigned long offset, unsigned long size) +{ + return match_trapped_io_handler(&trapped_mem, offset, size); +} +#else +#define __ioremap_trapped(offset, size) NULL +#endif + +#ifdef CONFIG_HAS_IOPORT +extern struct list_head trapped_io; + +static inline void __iomem * +__ioport_map_trapped(unsigned long offset, unsigned long size) +{ + return match_trapped_io_handler(&trapped_io, offset, size); +} +#else +#define __ioport_map_trapped(offset, size) NULL +#endif + +#else +#define register_trapped_io(tiop) (-1) +#define handle_trapped_io(tiop, address) 0 +#define __ioremap_trapped(offset, size) NULL +#define __ioport_map_trapped(offset, size) NULL +#endif + +#endif /* __ASM_SH_IO_TRAPPED_H */ diff --git a/arch/sh/include/asm/ioctl.h b/arch/sh/include/asm/ioctl.h new file mode 100644 index 000000000000..b279fe06dfe5 --- /dev/null +++ b/arch/sh/include/asm/ioctl.h @@ -0,0 +1 @@ +#include <asm-generic/ioctl.h> diff --git a/arch/sh/include/asm/ioctls.h b/arch/sh/include/asm/ioctls.h new file mode 100644 index 000000000000..c212c371a4a5 --- /dev/null +++ b/arch/sh/include/asm/ioctls.h @@ -0,0 +1,103 @@ +#ifndef __ASM_SH_IOCTLS_H +#define __ASM_SH_IOCTLS_H + +#include <asm/ioctl.h> + +#define FIOCLEX _IO('f', 1) +#define FIONCLEX _IO('f', 2) +#define FIOASYNC _IOW('f', 125, int) +#define FIONBIO _IOW('f', 126, int) +#define FIONREAD _IOR('f', 127, int) +#define TIOCINQ FIONREAD +#define FIOQSIZE _IOR('f', 128, loff_t) + +#define TCGETS 0x5401 +#define TCSETS 0x5402 +#define TCSETSW 0x5403 +#define TCSETSF 0x5404 + +#define TCGETA 0x80127417 /* _IOR('t', 23, struct termio) */ +#define TCSETA 0x40127418 /* _IOW('t', 24, struct termio) */ +#define TCSETAW 0x40127419 /* _IOW('t', 25, struct termio) */ +#define TCSETAF 0x4012741C /* _IOW('t', 28, struct termio) */ + +#define TCSBRK _IO('t', 29) +#define TCXONC _IO('t', 30) +#define TCFLSH _IO('t', 31) + +#define TIOCSWINSZ 0x40087467 /* _IOW('t', 103, struct winsize) */ +#define TIOCGWINSZ 0x80087468 /* _IOR('t', 104, struct winsize) */ +#define TIOCSTART _IO('t', 110) /* start output, like ^Q */ +#define TIOCSTOP _IO('t', 111) /* stop output, like ^S */ +#define TIOCOUTQ _IOR('t', 115, int) /* output queue size */ + +#define TIOCSPGRP _IOW('t', 118, int) +#define TIOCGPGRP _IOR('t', 119, int) + +#define TIOCEXCL _IO('T', 12) /* 0x540C */ +#define TIOCNXCL _IO('T', 13) /* 0x540D */ +#define TIOCSCTTY _IO('T', 14) /* 0x540E */ + +#define TIOCSTI _IOW('T', 18, char) /* 0x5412 */ +#define TIOCMGET _IOR('T', 21, unsigned int) /* 0x5415 */ +#define TIOCMBIS _IOW('T', 22, unsigned int) /* 0x5416 */ +#define TIOCMBIC _IOW('T', 23, unsigned int) /* 0x5417 */ +#define TIOCMSET _IOW('T', 24, unsigned int) /* 0x5418 */ +# define TIOCM_LE 0x001 +# define TIOCM_DTR 0x002 +# define TIOCM_RTS 0x004 +# define TIOCM_ST 0x008 +# define TIOCM_SR 0x010 +# define TIOCM_CTS 0x020 +# define TIOCM_CAR 0x040 +# define TIOCM_RNG 0x080 +# define TIOCM_DSR 0x100 +# define TIOCM_CD TIOCM_CAR +# define TIOCM_RI TIOCM_RNG + +#define TIOCGSOFTCAR _IOR('T', 25, unsigned int) /* 0x5419 */ +#define TIOCSSOFTCAR _IOW('T', 26, unsigned int) /* 0x541A */ +#define TIOCLINUX _IOW('T', 28, char) /* 0x541C */ +#define TIOCCONS _IO('T', 29) /* 0x541D */ +#define TIOCGSERIAL 0x803C541E /* _IOR('T', 30, struct serial_struct) 0x541E */ +#define TIOCSSERIAL 0x403C541F /* _IOW('T', 31, struct serial_struct) 0x541F */ +#define TIOCPKT _IOW('T', 32, int) /* 0x5420 */ +# define TIOCPKT_DATA 0 +# define TIOCPKT_FLUSHREAD 1 +# define TIOCPKT_FLUSHWRITE 2 +# define TIOCPKT_STOP 4 +# define TIOCPKT_START 8 +# define TIOCPKT_NOSTOP 16 +# define TIOCPKT_DOSTOP 32 + + +#define TIOCNOTTY _IO('T', 34) /* 0x5422 */ +#define TIOCSETD _IOW('T', 35, int) /* 0x5423 */ +#define TIOCGETD _IOR('T', 36, int) /* 0x5424 */ +#define TCSBRKP _IOW('T', 37, int) /* 0x5425 */ /* Needed for POSIX tcsendbreak() */ +#define TIOCSBRK _IO('T', 39) /* 0x5427 */ /* BSD compatibility */ +#define TIOCCBRK _IO('T', 40) /* 0x5428 */ /* BSD compatibility */ +#define TIOCGSID _IOR('T', 41, pid_t) /* 0x5429 */ /* Return the session ID of FD */ +#define TCGETS2 _IOR('T', 42, struct termios2) +#define TCSETS2 _IOW('T', 43, struct termios2) +#define TCSETSW2 _IOW('T', 44, struct termios2) +#define TCSETSF2 _IOW('T', 45, struct termios2) +#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */ +#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */ + +#define TIOCSERCONFIG _IO('T', 83) /* 0x5453 */ +#define TIOCSERGWILD _IOR('T', 84, int) /* 0x5454 */ +#define TIOCSERSWILD _IOW('T', 85, int) /* 0x5455 */ +#define TIOCGLCKTRMIOS 0x5456 +#define TIOCSLCKTRMIOS 0x5457 +#define TIOCSERGSTRUCT 0x80d85458 /* _IOR('T', 88, struct async_struct) 0x5458 */ /* For debugging only */ +#define TIOCSERGETLSR _IOR('T', 89, unsigned int) /* 0x5459 */ /* Get line status register */ + /* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */ +# define TIOCSER_TEMT 0x01 /* Transmitter physically empty */ +#define TIOCSERGETMULTI 0x80A8545A /* _IOR('T', 90, struct serial_multiport_struct) 0x545A */ /* Get multiport config */ +#define TIOCSERSETMULTI 0x40A8545B /* _IOW('T', 91, struct serial_multiport_struct) 0x545B */ /* Set multiport config */ + +#define TIOCMIWAIT _IO('T', 92) /* 0x545C */ /* wait for a change on serial input line(s) */ +#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */ + +#endif /* __ASM_SH_IOCTLS_H */ diff --git a/arch/sh/include/asm/ipcbuf.h b/arch/sh/include/asm/ipcbuf.h new file mode 100644 index 000000000000..5ffc9972a7ea --- /dev/null +++ b/arch/sh/include/asm/ipcbuf.h @@ -0,0 +1,29 @@ +#ifndef __ASM_SH_IPCBUF_H__ +#define __ASM_SH_IPCBUF_H__ + +/* + * The ipc64_perm structure for i386 architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 32-bit mode_t and seq + * - 2 miscellaneous 32-bit values + */ + +struct ipc64_perm +{ + __kernel_key_t key; + __kernel_uid32_t uid; + __kernel_gid32_t gid; + __kernel_uid32_t cuid; + __kernel_gid32_t cgid; + __kernel_mode_t mode; + unsigned short __pad1; + unsigned short seq; + unsigned short __pad2; + unsigned long __unused1; + unsigned long __unused2; +}; + +#endif /* __ASM_SH_IPCBUF_H__ */ diff --git a/arch/sh/include/asm/irq.h b/arch/sh/include/asm/irq.h new file mode 100644 index 000000000000..6195a531c1b0 --- /dev/null +++ b/arch/sh/include/asm/irq.h @@ -0,0 +1,57 @@ +#ifndef __ASM_SH_IRQ_H +#define __ASM_SH_IRQ_H + +#include <asm/machvec.h> + +/* + * A sane default based on a reasonable vector table size, platforms are + * advised to cap this at the hard limit that they're interested in + * through the machvec. + */ +#define NR_IRQS 256 + +/* + * Convert back and forth between INTEVT and IRQ values. + */ +#ifdef CONFIG_CPU_HAS_INTEVT +#define evt2irq(evt) (((evt) >> 5) - 16) +#define irq2evt(irq) (((irq) + 16) << 5) +#else +#define evt2irq(evt) (evt) +#define irq2evt(irq) (irq) +#endif + +/* + * Simple Mask Register Support + */ +extern void make_maskreg_irq(unsigned int irq); +extern unsigned short *irq_mask_register; + +/* + * PINT IRQs + */ +void init_IRQ_pint(void); +void make_imask_irq(unsigned int irq); + +static inline int generic_irq_demux(int irq) +{ + return irq; +} + +#define irq_canonicalize(irq) (irq) +#define irq_demux(irq) sh_mv.mv_irq_demux(irq) + +#ifdef CONFIG_IRQSTACKS +extern void irq_ctx_init(int cpu); +extern void irq_ctx_exit(int cpu); +# define __ARCH_HAS_DO_SOFTIRQ +#else +# define irq_ctx_init(cpu) do { } while (0) +# define irq_ctx_exit(cpu) do { } while (0) +#endif + +#ifdef CONFIG_CPU_SH5 +#include <cpu/irq.h> +#endif + +#endif /* __ASM_SH_IRQ_H */ diff --git a/arch/sh/include/asm/irq_regs.h b/arch/sh/include/asm/irq_regs.h new file mode 100644 index 000000000000..3dd9c0b70270 --- /dev/null +++ b/arch/sh/include/asm/irq_regs.h @@ -0,0 +1 @@ +#include <asm-generic/irq_regs.h> diff --git a/arch/sh/include/asm/irqflags.h b/arch/sh/include/asm/irqflags.h new file mode 100644 index 000000000000..46e71da5be6b --- /dev/null +++ b/arch/sh/include/asm/irqflags.h @@ -0,0 +1,34 @@ +#ifndef __ASM_SH_IRQFLAGS_H +#define __ASM_SH_IRQFLAGS_H + +#ifdef CONFIG_SUPERH32 +#include "irqflags_32.h" +#else +#include "irqflags_64.h" +#endif + +#define raw_local_save_flags(flags) \ + do { (flags) = __raw_local_save_flags(); } while (0) + +static inline int raw_irqs_disabled_flags(unsigned long flags) +{ + return (flags != 0); +} + +static inline int raw_irqs_disabled(void) +{ + unsigned long flags = __raw_local_save_flags(); + + return raw_irqs_disabled_flags(flags); +} + +#define raw_local_irq_save(flags) \ + do { (flags) = __raw_local_irq_save(); } while (0) + +static inline void raw_local_irq_restore(unsigned long flags) +{ + if ((flags & 0xf0) != 0xf0) + raw_local_irq_enable(); +} + +#endif /* __ASM_SH_IRQFLAGS_H */ diff --git a/arch/sh/include/asm/irqflags_32.h b/arch/sh/include/asm/irqflags_32.h new file mode 100644 index 000000000000..60218f541340 --- /dev/null +++ b/arch/sh/include/asm/irqflags_32.h @@ -0,0 +1,99 @@ +#ifndef __ASM_SH_IRQFLAGS_32_H +#define __ASM_SH_IRQFLAGS_32_H + +static inline void raw_local_irq_enable(void) +{ + unsigned long __dummy0, __dummy1; + + __asm__ __volatile__ ( + "stc sr, %0\n\t" + "and %1, %0\n\t" +#ifdef CONFIG_CPU_HAS_SR_RB + "stc r6_bank, %1\n\t" + "or %1, %0\n\t" +#endif + "ldc %0, sr\n\t" + : "=&r" (__dummy0), "=r" (__dummy1) + : "1" (~0x000000f0) + : "memory" + ); +} + +static inline void raw_local_irq_disable(void) +{ + unsigned long flags; + + __asm__ __volatile__ ( + "stc sr, %0\n\t" + "or #0xf0, %0\n\t" + "ldc %0, sr\n\t" + : "=&z" (flags) + : /* no inputs */ + : "memory" + ); +} + +static inline void set_bl_bit(void) +{ + unsigned long __dummy0, __dummy1; + + __asm__ __volatile__ ( + "stc sr, %0\n\t" + "or %2, %0\n\t" + "and %3, %0\n\t" + "ldc %0, sr\n\t" + : "=&r" (__dummy0), "=r" (__dummy1) + : "r" (0x10000000), "r" (0xffffff0f) + : "memory" + ); +} + +static inline void clear_bl_bit(void) +{ + unsigned long __dummy0, __dummy1; + + __asm__ __volatile__ ( + "stc sr, %0\n\t" + "and %2, %0\n\t" + "ldc %0, sr\n\t" + : "=&r" (__dummy0), "=r" (__dummy1) + : "1" (~0x10000000) + : "memory" + ); +} + +static inline unsigned long __raw_local_save_flags(void) +{ + unsigned long flags; + + __asm__ __volatile__ ( + "stc sr, %0\n\t" + "and #0xf0, %0\n\t" + : "=&z" (flags) + : /* no inputs */ + : "memory" + ); + + return flags; +} + +static inline unsigned long __raw_local_irq_save(void) +{ + unsigned long flags, __dummy; + + __asm__ __volatile__ ( + "stc sr, %1\n\t" + "mov %1, %0\n\t" + "or #0xf0, %0\n\t" + "ldc %0, sr\n\t" + "mov %1, %0\n\t" + "and #0xf0, %0\n\t" + : "=&z" (flags), "=&r" (__dummy) + : /* no inputs */ + : "memory" + ); + + return flags; +} + +#endif /* __ASM_SH_IRQFLAGS_32_H */ diff --git a/arch/sh/include/asm/irqflags_64.h b/arch/sh/include/asm/irqflags_64.h new file mode 100644 index 000000000000..88f65222c1d4 --- /dev/null +++ b/arch/sh/include/asm/irqflags_64.h @@ -0,0 +1,85 @@ +#ifndef __ASM_SH_IRQFLAGS_64_H +#define __ASM_SH_IRQFLAGS_64_H + +#include <cpu/registers.h> + +#define SR_MASK_LL 0x00000000000000f0LL +#define SR_BL_LL 0x0000000010000000LL + +static inline void raw_local_irq_enable(void) +{ + unsigned long long __dummy0, __dummy1 = ~SR_MASK_LL; + + __asm__ __volatile__("getcon " __SR ", %0\n\t" + "and %0, %1, %0\n\t" + "putcon %0, " __SR "\n\t" + : "=&r" (__dummy0) + : "r" (__dummy1)); +} + +static inline void raw_local_irq_disable(void) +{ + unsigned long long __dummy0, __dummy1 = SR_MASK_LL; + + __asm__ __volatile__("getcon " __SR ", %0\n\t" + "or %0, %1, %0\n\t" + "putcon %0, " __SR "\n\t" + : "=&r" (__dummy0) + : "r" (__dummy1)); +} + +static inline void set_bl_bit(void) +{ + unsigned long long __dummy0, __dummy1 = SR_BL_LL; + + __asm__ __volatile__("getcon " __SR ", %0\n\t" + "or %0, %1, %0\n\t" + "putcon %0, " __SR "\n\t" + : "=&r" (__dummy0) + : "r" (__dummy1)); + +} + +static inline void clear_bl_bit(void) +{ + unsigned long long __dummy0, __dummy1 = ~SR_BL_LL; + + __asm__ __volatile__("getcon " __SR ", %0\n\t" + "and %0, %1, %0\n\t" + "putcon %0, " __SR "\n\t" + : "=&r" (__dummy0) + : "r" (__dummy1)); +} + +static inline unsigned long __raw_local_save_flags(void) +{ + unsigned long long __dummy = SR_MASK_LL; + unsigned long flags; + + __asm__ __volatile__ ( + "getcon " __SR ", %0\n\t" + "and %0, %1, %0" + : "=&r" (flags) + : "r" (__dummy)); + + return flags; +} + +static inline unsigned long __raw_local_irq_save(void) +{ + unsigned long long __dummy0, __dummy1 = SR_MASK_LL; + unsigned long flags; + + __asm__ __volatile__ ( + "getcon " __SR ", %1\n\t" + "or %1, r63, %0\n\t" + "or %1, %2, %1\n\t" + "putcon %1, " __SR "\n\t" + "and %0, %2, %0" + : "=&r" (flags), "=&r" (__dummy0) + : "r" (__dummy1)); + + return flags; +} + +#endif /* __ASM_SH_IRQFLAGS_64_H */ diff --git a/arch/sh/include/asm/kdebug.h b/arch/sh/include/asm/kdebug.h new file mode 100644 index 000000000000..49cd69051a88 --- /dev/null +++ b/arch/sh/include/asm/kdebug.h @@ -0,0 +1,9 @@ +#ifndef __ASM_SH_KDEBUG_H +#define __ASM_SH_KDEBUG_H + +/* Grossly misnamed. */ +enum die_val { + DIE_TRAP, +}; + +#endif /* __ASM_SH_KDEBUG_H */ diff --git a/arch/sh/include/asm/kexec.h b/arch/sh/include/asm/kexec.h new file mode 100644 index 000000000000..00f4260ef09b --- /dev/null +++ b/arch/sh/include/asm/kexec.h @@ -0,0 +1,62 @@ +#ifndef __ASM_SH_KEXEC_H +#define __ASM_SH_KEXEC_H + +#include <asm/ptrace.h> +#include <asm/string.h> + +/* + * KEXEC_SOURCE_MEMORY_LIMIT maximum page get_free_page can return. + * I.e. Maximum page that is mapped directly into kernel memory, + * and kmap is not required. + * + * Someone correct me if FIXADDR_START - PAGEOFFSET is not the correct + * calculation for the amount of memory directly mappable into the + * kernel memory space. + */ + +/* Maximum physical address we can use pages from */ +#define KEXEC_SOURCE_MEMORY_LIMIT (-1UL) +/* Maximum address we can reach in physical address mode */ +#define KEXEC_DESTINATION_MEMORY_LIMIT (-1UL) +/* Maximum address we can use for the control code buffer */ +#define KEXEC_CONTROL_MEMORY_LIMIT TASK_SIZE + +#define KEXEC_CONTROL_CODE_SIZE 4096 + +/* The native architecture */ +#define KEXEC_ARCH KEXEC_ARCH_SH + +static inline void crash_setup_regs(struct pt_regs *newregs, + struct pt_regs *oldregs) +{ + if (oldregs) + memcpy(newregs, oldregs, sizeof(*newregs)); + else { + __asm__ __volatile__ ("mov r0, %0" : "=r" (newregs->regs[0])); + __asm__ __volatile__ ("mov r1, %0" : "=r" (newregs->regs[1])); + __asm__ __volatile__ ("mov r2, %0" : "=r" (newregs->regs[2])); + __asm__ __volatile__ ("mov r3, %0" : "=r" (newregs->regs[3])); + __asm__ __volatile__ ("mov r4, %0" : "=r" (newregs->regs[4])); + __asm__ __volatile__ ("mov r5, %0" : "=r" (newregs->regs[5])); + __asm__ __volatile__ ("mov r6, %0" : "=r" (newregs->regs[6])); + __asm__ __volatile__ ("mov r7, %0" : "=r" (newregs->regs[7])); + __asm__ __volatile__ ("mov r8, %0" : "=r" (newregs->regs[8])); + __asm__ __volatile__ ("mov r9, %0" : "=r" (newregs->regs[9])); + __asm__ __volatile__ ("mov r10, %0" : "=r" (newregs->regs[10])); + __asm__ __volatile__ ("mov r11, %0" : "=r" (newregs->regs[11])); + __asm__ __volatile__ ("mov r12, %0" : "=r" (newregs->regs[12])); + __asm__ __volatile__ ("mov r13, %0" : "=r" (newregs->regs[13])); + __asm__ __volatile__ ("mov r14, %0" : "=r" (newregs->regs[14])); + __asm__ __volatile__ ("mov r15, %0" : "=r" (newregs->regs[15])); + + __asm__ __volatile__ ("sts pr, %0" : "=r" (newregs->pr)); + __asm__ __volatile__ ("sts macl, %0" : "=r" (newregs->macl)); + __asm__ __volatile__ ("sts mach, %0" : "=r" (newregs->mach)); + + __asm__ __volatile__ ("stc gbr, %0" : "=r" (newregs->gbr)); + __asm__ __volatile__ ("stc sr, %0" : "=r" (newregs->sr)); + + newregs->pc = (unsigned long)current_text_addr(); + } +} +#endif /* __ASM_SH_KEXEC_H */ diff --git a/arch/sh/include/asm/kgdb.h b/arch/sh/include/asm/kgdb.h new file mode 100644 index 000000000000..24e42078f36f --- /dev/null +++ b/arch/sh/include/asm/kgdb.h @@ -0,0 +1,69 @@ +/* + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + * + * Based on original code by Glenn Engel, Jim Kingdon, + * David Grothe <dave@gcom.com>, Tigran Aivazian, <tigran@sco.com> and + * Amit S. Kale <akale@veritas.com> + * + * Super-H port based on sh-stub.c (Ben Lee and Steve Chamberlain) by + * Henry Bell <henry.bell@st.com> + * + * Header file for low-level support for remote debug using GDB. + * + */ + +#ifndef __KGDB_H +#define __KGDB_H + +#include <asm/ptrace.h> + +/* Same as pt_regs but has vbr in place of syscall_nr */ +struct kgdb_regs { + unsigned long regs[16]; + unsigned long pc; + unsigned long pr; + unsigned long sr; + unsigned long gbr; + unsigned long mach; + unsigned long macl; + unsigned long vbr; +}; + +/* State info */ +extern char kgdb_in_gdb_mode; +extern int kgdb_nofault; /* Ignore bus errors (in gdb mem access) */ +extern char in_nmi; /* Debounce flag to prevent NMI reentry*/ + +/* SCI */ +extern int kgdb_portnum; +extern int kgdb_baud; +extern char kgdb_parity; +extern char kgdb_bits; + +/* Init and interface stuff */ +extern int kgdb_init(void); +extern int (*kgdb_getchar)(void); +extern void (*kgdb_putchar)(int); + +/* Trap functions */ +typedef void (kgdb_debug_hook_t)(struct pt_regs *regs); +typedef void (kgdb_bus_error_hook_t)(void); +extern kgdb_debug_hook_t *kgdb_debug_hook; +extern kgdb_bus_error_hook_t *kgdb_bus_err_hook; + +/* Console */ +struct console; +void kgdb_console_write(struct console *co, const char *s, unsigned count); +extern int kgdb_console_setup(struct console *, char *); + +/* Prototypes for jmp fns */ +#define _JBLEN 9 +typedef int jmp_buf[_JBLEN]; +extern void longjmp(jmp_buf __jmpb, int __retval); +extern int setjmp(jmp_buf __jmpb); + +/* Forced breakpoint */ +#define breakpoint() __asm__ __volatile__("trapa #0x3c") + +#endif diff --git a/arch/sh/include/asm/kmap_types.h b/arch/sh/include/asm/kmap_types.h new file mode 100644 index 000000000000..84d565c696be --- /dev/null +++ b/arch/sh/include/asm/kmap_types.h @@ -0,0 +1,32 @@ +#ifndef __SH_KMAP_TYPES_H +#define __SH_KMAP_TYPES_H + +/* Dummy header just to define km_type. */ + + +#ifdef CONFIG_DEBUG_HIGHMEM +# define D(n) __KM_FENCE_##n , +#else +# define D(n) +#endif + +enum km_type { +D(0) KM_BOUNCE_READ, +D(1) KM_SKB_SUNRPC_DATA, +D(2) KM_SKB_DATA_SOFTIRQ, +D(3) KM_USER0, +D(4) KM_USER1, +D(5) KM_BIO_SRC_IRQ, +D(6) KM_BIO_DST_IRQ, +D(7) KM_PTE0, +D(8) KM_PTE1, +D(9) KM_IRQ0, +D(10) KM_IRQ1, +D(11) KM_SOFTIRQ0, +D(12) KM_SOFTIRQ1, +D(13) KM_TYPE_NR +}; + +#undef D + +#endif diff --git a/arch/sh/include/asm/lboxre2.h b/arch/sh/include/asm/lboxre2.h new file mode 100644 index 000000000000..e6d160504923 --- /dev/null +++ b/arch/sh/include/asm/lboxre2.h @@ -0,0 +1,27 @@ +#ifndef __ASM_SH_LBOXRE2_H +#define __ASM_SH_LBOXRE2_H + +/* + * Copyright (C) 2007 Nobuhiro Iwamatsu + * + * NTT COMWARE L-BOX RE2 support + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + */ + +#define IRQ_CF1 9 /* CF1 */ +#define IRQ_CF0 10 /* CF0 */ +#define IRQ_INTD 11 /* INTD */ +#define IRQ_ETH1 12 /* Ether1 */ +#define IRQ_ETH0 13 /* Ether0 */ +#define IRQ_INTA 14 /* INTA */ + +void init_lboxre2_IRQ(void); + +#define __IO_PREFIX lboxre2 +#include <asm/io_generic.h> + +#endif /* __ASM_SH_LBOXRE2_H */ diff --git a/arch/sh/include/asm/linkage.h b/arch/sh/include/asm/linkage.h new file mode 100644 index 000000000000..3565a4f4009f --- /dev/null +++ b/arch/sh/include/asm/linkage.h @@ -0,0 +1,7 @@ +#ifndef __ASM_LINKAGE_H +#define __ASM_LINKAGE_H + +#define __ALIGN .balign 4 +#define __ALIGN_STR ".balign 4" + +#endif diff --git a/arch/sh/include/asm/local.h b/arch/sh/include/asm/local.h new file mode 100644 index 000000000000..9ed9b9cb459a --- /dev/null +++ b/arch/sh/include/asm/local.h @@ -0,0 +1,7 @@ +#ifndef __ASM_SH_LOCAL_H +#define __ASM_SH_LOCAL_H + +#include <asm-generic/local.h> + +#endif /* __ASM_SH_LOCAL_H */ + diff --git a/arch/sh/include/asm/machvec.h b/arch/sh/include/asm/machvec.h new file mode 100644 index 000000000000..b2e4124070ae --- /dev/null +++ b/arch/sh/include/asm/machvec.h @@ -0,0 +1,70 @@ +/* + * include/asm-sh/machvec.h + * + * Copyright 2000 Stuart Menefy (stuart.menefy@st.com) + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + */ + +#ifndef _ASM_SH_MACHVEC_H +#define _ASM_SH_MACHVEC_H + +#include <linux/types.h> +#include <linux/time.h> +#include <asm/machtypes.h> + +struct device; + +struct sh_machine_vector { + void (*mv_setup)(char **cmdline_p); + const char *mv_name; + int mv_nr_irqs; + + u8 (*mv_inb)(unsigned long); + u16 (*mv_inw)(unsigned long); + u32 (*mv_inl)(unsigned long); + void (*mv_outb)(u8, unsigned long); + void (*mv_outw)(u16, unsigned long); + void (*mv_outl)(u32, unsigned long); + + u8 (*mv_inb_p)(unsigned long); + u16 (*mv_inw_p)(unsigned long); + u32 (*mv_inl_p)(unsigned long); + void (*mv_outb_p)(u8, unsigned long); + void (*mv_outw_p)(u16, unsigned long); + void (*mv_outl_p)(u32, unsigned long); + + void (*mv_insb)(unsigned long, void *dst, unsigned long count); + void (*mv_insw)(unsigned long, void *dst, unsigned long count); + void (*mv_insl)(unsigned long, void *dst, unsigned long count); + void (*mv_outsb)(unsigned long, const void *src, unsigned long count); + void (*mv_outsw)(unsigned long, const void *src, unsigned long count); + void (*mv_outsl)(unsigned long, const void *src, unsigned long count); + + u8 (*mv_readb)(void __iomem *); + u16 (*mv_readw)(void __iomem *); + u32 (*mv_readl)(void __iomem *); + void (*mv_writeb)(u8, void __iomem *); + void (*mv_writew)(u16, void __iomem *); + void (*mv_writel)(u32, void __iomem *); + + int (*mv_irq_demux)(int irq); + + void (*mv_init_irq)(void); + void (*mv_init_pci)(void); + + void (*mv_heartbeat)(void); + + void __iomem *(*mv_ioport_map)(unsigned long port, unsigned int size); + void (*mv_ioport_unmap)(void __iomem *); +}; + +extern struct sh_machine_vector sh_mv; + +#define get_system_type() sh_mv.mv_name + +#define __initmv \ + __used __section(.machvec.init) + +#endif /* _ASM_SH_MACHVEC_H */ diff --git a/arch/sh/include/asm/magicpanelr2.h b/arch/sh/include/asm/magicpanelr2.h new file mode 100644 index 000000000000..c644a77ee357 --- /dev/null +++ b/arch/sh/include/asm/magicpanelr2.h @@ -0,0 +1,67 @@ +/* + * include/asm-sh/magicpanelr2.h + * + * Copyright (C) 2007 Markus Brunner, Mark Jonas + * + * I/O addresses and bitmasks for Magic Panel Release 2 board + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#ifndef __ASM_SH_MAGICPANELR2_H +#define __ASM_SH_MAGICPANELR2_H + +#include <asm/gpio.h> + +#define __IO_PREFIX mpr2 +#include <asm/io_generic.h> + + +#define SETBITS_OUTB(mask, reg) ctrl_outb(ctrl_inb(reg) | mask, reg) +#define SETBITS_OUTW(mask, reg) ctrl_outw(ctrl_inw(reg) | mask, reg) +#define SETBITS_OUTL(mask, reg) ctrl_outl(ctrl_inl(reg) | mask, reg) +#define CLRBITS_OUTB(mask, reg) ctrl_outb(ctrl_inb(reg) & ~mask, reg) +#define CLRBITS_OUTW(mask, reg) ctrl_outw(ctrl_inw(reg) & ~mask, reg) +#define CLRBITS_OUTL(mask, reg) ctrl_outl(ctrl_inl(reg) & ~mask, reg) + + +#define PA_LED PORT_PADR /* LED */ + + +/* BSC */ +#define CMNCR 0xA4FD0000UL +#define CS0BCR 0xA4FD0004UL +#define CS2BCR 0xA4FD0008UL +#define CS3BCR 0xA4FD000CUL +#define CS4BCR 0xA4FD0010UL +#define CS5ABCR 0xA4FD0014UL +#define CS5BBCR 0xA4FD0018UL +#define CS6ABCR 0xA4FD001CUL +#define CS6BBCR 0xA4FD0020UL +#define CS0WCR 0xA4FD0024UL +#define CS2WCR 0xA4FD0028UL +#define CS3WCR 0xA4FD002CUL +#define CS4WCR 0xA4FD0030UL +#define CS5AWCR 0xA4FD0034UL +#define CS5BWCR 0xA4FD0038UL +#define CS6AWCR 0xA4FD003CUL +#define CS6BWCR 0xA4FD0040UL + + +/* usb */ + +#define PORT_UTRCTL 0xA405012CUL +#define PORT_UCLKCR_W 0xA40A0008UL + +#define INTC_ICR0 0xA414FEE0UL +#define INTC_ICR1 0xA4140010UL +#define INTC_ICR2 0xA4140012UL + +/* MTD */ + +#define MPR2_MTD_BOOTLOADER_SIZE 0x00060000UL +#define MPR2_MTD_KERNEL_SIZE 0x00200000UL + +#endif /* __ASM_SH_MAGICPANELR2_H */ diff --git a/arch/sh/include/asm/mc146818rtc.h b/arch/sh/include/asm/mc146818rtc.h new file mode 100644 index 000000000000..0aee96a97330 --- /dev/null +++ b/arch/sh/include/asm/mc146818rtc.h @@ -0,0 +1,7 @@ +/* + * Machine dependent access functions for RTC registers. + */ +#ifndef _ASM_MC146818RTC_H +#define _ASM_MC146818RTC_H + +#endif /* _ASM_MC146818RTC_H */ diff --git a/arch/sh/include/asm/microdev.h b/arch/sh/include/asm/microdev.h new file mode 100644 index 000000000000..1aed15856e11 --- /dev/null +++ b/arch/sh/include/asm/microdev.h @@ -0,0 +1,80 @@ +/* + * linux/include/asm-sh/microdev.h + * + * Copyright (C) 2003 Sean McGoogan (Sean.McGoogan@superh.com) + * + * Definitions for the SuperH SH4-202 MicroDev board. + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + */ +#ifndef __ASM_SH_MICRODEV_H +#define __ASM_SH_MICRODEV_H + +extern void init_microdev_irq(void); +extern void microdev_print_fpga_intc_status(void); + +/* + * The following are useful macros for manipulating the interrupt + * controller (INTC) on the CPU-board FPGA. should be noted that there + * is an INTC on the FPGA, and a separate INTC on the SH4-202 core - + * these are two different things, both of which need to be prorammed to + * correctly route - unfortunately, they have the same name and + * abbreviations! + */ +#define MICRODEV_FPGA_INTC_BASE 0xa6110000ul /* INTC base address on CPU-board FPGA */ +#define MICRODEV_FPGA_INTENB_REG (MICRODEV_FPGA_INTC_BASE+0ul) /* Interrupt Enable Register on INTC on CPU-board FPGA */ +#define MICRODEV_FPGA_INTDSB_REG (MICRODEV_FPGA_INTC_BASE+8ul) /* Interrupt Disable Register on INTC on CPU-board FPGA */ +#define MICRODEV_FPGA_INTC_MASK(n) (1ul<<(n)) /* Interrupt mask to enable/disable INTC in CPU-board FPGA */ +#define MICRODEV_FPGA_INTPRI_REG(n) (MICRODEV_FPGA_INTC_BASE+0x10+((n)/8)*8)/* Interrupt Priority Register on INTC on CPU-board FPGA */ +#define MICRODEV_FPGA_INTPRI_LEVEL(n,x) ((x)<<(((n)%8)*4)) /* MICRODEV_FPGA_INTPRI_LEVEL(int_number, int_level) */ +#define MICRODEV_FPGA_INTPRI_MASK(n) (MICRODEV_FPGA_INTPRI_LEVEL((n),0xful)) /* Interrupt Priority Mask on INTC on CPU-board FPGA */ +#define MICRODEV_FPGA_INTSRC_REG (MICRODEV_FPGA_INTC_BASE+0x30ul) /* Interrupt Source Register on INTC on CPU-board FPGA */ +#define MICRODEV_FPGA_INTREQ_REG (MICRODEV_FPGA_INTC_BASE+0x38ul) /* Interrupt Request Register on INTC on CPU-board FPGA */ + + +/* + * The following are the IRQ numbers for the Linux Kernel for external + * interrupts. i.e. the numbers seen by 'cat /proc/interrupt'. + */ +#define MICRODEV_LINUX_IRQ_KEYBOARD 1 /* SuperIO Keyboard */ +#define MICRODEV_LINUX_IRQ_SERIAL1 2 /* SuperIO Serial #1 */ +#define MICRODEV_LINUX_IRQ_ETHERNET 3 /* on-board Ethnernet */ +#define MICRODEV_LINUX_IRQ_SERIAL2 4 /* SuperIO Serial #2 */ +#define MICRODEV_LINUX_IRQ_USB_HC 7 /* on-board USB HC */ +#define MICRODEV_LINUX_IRQ_MOUSE 12 /* SuperIO PS/2 Mouse */ +#define MICRODEV_LINUX_IRQ_IDE2 13 /* SuperIO IDE #2 */ +#define MICRODEV_LINUX_IRQ_IDE1 14 /* SuperIO IDE #1 */ + +/* + * The following are the IRQ numbers for the INTC on the FPGA for + * external interrupts. i.e. the bits in the INTC registers in the + * FPGA. + */ +#define MICRODEV_FPGA_IRQ_KEYBOARD 1 /* SuperIO Keyboard */ +#define MICRODEV_FPGA_IRQ_SERIAL1 3 /* SuperIO Serial #1 */ +#define MICRODEV_FPGA_IRQ_SERIAL2 4 /* SuperIO Serial #2 */ +#define MICRODEV_FPGA_IRQ_MOUSE 12 /* SuperIO PS/2 Mouse */ +#define MICRODEV_FPGA_IRQ_IDE1 14 /* SuperIO IDE #1 */ +#define MICRODEV_FPGA_IRQ_IDE2 15 /* SuperIO IDE #2 */ +#define MICRODEV_FPGA_IRQ_USB_HC 16 /* on-board USB HC */ +#define MICRODEV_FPGA_IRQ_ETHERNET 18 /* on-board Ethnernet */ + +#define MICRODEV_IRQ_PCI_INTA 8 +#define MICRODEV_IRQ_PCI_INTB 9 +#define MICRODEV_IRQ_PCI_INTC 10 +#define MICRODEV_IRQ_PCI_INTD 11 + +#define __IO_PREFIX microdev +#include <asm/io_generic.h> + +#if defined(CONFIG_PCI) +unsigned char microdev_pci_inb(unsigned long port); +unsigned short microdev_pci_inw(unsigned long port); +unsigned long microdev_pci_inl(unsigned long port); +void microdev_pci_outb(unsigned char data, unsigned long port); +void microdev_pci_outw(unsigned short data, unsigned long port); +void microdev_pci_outl(unsigned long data, unsigned long port); +#endif + +#endif /* __ASM_SH_MICRODEV_H */ diff --git a/arch/sh/include/asm/migor.h b/arch/sh/include/asm/migor.h new file mode 100644 index 000000000000..10016e0f4a4e --- /dev/null +++ b/arch/sh/include/asm/migor.h @@ -0,0 +1,65 @@ +#ifndef __ASM_SH_MIGOR_H +#define __ASM_SH_MIGOR_H + +/* + * linux/include/asm-sh/migor.h + * + * Copyright (C) 2008 Renesas Solutions + * + * Portions Copyright (C) 2007 Nobuhiro Iwamatsu + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + */ +#include <asm/addrspace.h> + +/* GPIO */ +#define PORT_PACR 0xa4050100 +#define PORT_PDCR 0xa4050106 +#define PORT_PECR 0xa4050108 +#define PORT_PHCR 0xa405010e +#define PORT_PJCR 0xa4050110 +#define PORT_PKCR 0xa4050112 +#define PORT_PLCR 0xa4050114 +#define PORT_PMCR 0xa4050116 +#define PORT_PRCR 0xa405011c +#define PORT_PTCR 0xa4050140 +#define PORT_PUCR 0xa4050142 +#define PORT_PVCR 0xa4050144 +#define PORT_PWCR 0xa4050146 +#define PORT_PXCR 0xa4050148 +#define PORT_PYCR 0xa405014a +#define PORT_PZCR 0xa405014c +#define PORT_PADR 0xa4050120 +#define PORT_PHDR 0xa405012e +#define PORT_PTDR 0xa4050160 +#define PORT_PWDR 0xa4050166 + +#define PORT_HIZCRA 0xa4050158 +#define PORT_HIZCRC 0xa405015c + +#define PORT_MSELCRB 0xa4050182 + +#define MSTPCR1 0xa4150034 +#define MSTPCR2 0xa4150038 + +#define PORT_PSELA 0xa405014e +#define PORT_PSELB 0xa4050150 +#define PORT_PSELC 0xa4050152 +#define PORT_PSELD 0xa4050154 +#define PORT_PSELE 0xa4050156 + +#define PORT_HIZCRA 0xa4050158 +#define PORT_HIZCRB 0xa405015a +#define PORT_HIZCRC 0xa405015c + +#define BSC_CS6ABCR 0xfec1001c + +#include <asm/sh_mobile_lcdc.h> + +int migor_lcd_qvga_setup(void *board_data, void *sys_ops_handle, + struct sh_mobile_lcdc_sys_bus_ops *sys_ops); + +#endif /* __ASM_SH_MIGOR_H */ diff --git a/arch/sh/include/asm/mman.h b/arch/sh/include/asm/mman.h new file mode 100644 index 000000000000..156eb0225cf6 --- /dev/null +++ b/arch/sh/include/asm/mman.h @@ -0,0 +1,17 @@ +#ifndef __ASM_SH_MMAN_H +#define __ASM_SH_MMAN_H + +#include <asm-generic/mman.h> + +#define MAP_GROWSDOWN 0x0100 /* stack-like segment */ +#define MAP_DENYWRITE 0x0800 /* ETXTBSY */ +#define MAP_EXECUTABLE 0x1000 /* mark it as an executable */ +#define MAP_LOCKED 0x2000 /* pages are locked */ +#define MAP_NORESERVE 0x4000 /* don't check for reservations */ +#define MAP_POPULATE 0x8000 /* populate (prefault) page tables */ +#define MAP_NONBLOCK 0x10000 /* do not block on IO */ + +#define MCL_CURRENT 1 /* lock all current mappings */ +#define MCL_FUTURE 2 /* lock all future mappings */ + +#endif /* __ASM_SH_MMAN_H */ diff --git a/arch/sh/include/asm/mmu.h b/arch/sh/include/asm/mmu.h new file mode 100644 index 000000000000..fdcb93bc6d11 --- /dev/null +++ b/arch/sh/include/asm/mmu.h @@ -0,0 +1,76 @@ +#ifndef __MMU_H +#define __MMU_H + +/* Default "unsigned long" context */ +typedef unsigned long mm_context_id_t[NR_CPUS]; + +typedef struct { +#ifdef CONFIG_MMU + mm_context_id_t id; + void *vdso; +#else + struct vm_list_struct *vmlist; + unsigned long end_brk; +#endif +#ifdef CONFIG_BINFMT_ELF_FDPIC + unsigned long exec_fdpic_loadmap; + unsigned long interp_fdpic_loadmap; +#endif +} mm_context_t; + +/* + * Privileged Space Mapping Buffer (PMB) definitions + */ +#define PMB_PASCR 0xff000070 +#define PMB_IRMCR 0xff000078 + +#define PMB_ADDR 0xf6100000 +#define PMB_DATA 0xf7100000 +#define PMB_ENTRY_MAX 16 +#define PMB_E_MASK 0x0000000f +#define PMB_E_SHIFT 8 + +#define PMB_SZ_16M 0x00000000 +#define PMB_SZ_64M 0x00000010 +#define PMB_SZ_128M 0x00000080 +#define PMB_SZ_512M 0x00000090 +#define PMB_SZ_MASK PMB_SZ_512M +#define PMB_C 0x00000008 +#define PMB_WT 0x00000001 +#define PMB_UB 0x00000200 +#define PMB_V 0x00000100 + +#define PMB_NO_ENTRY (-1) + +struct pmb_entry; + +struct pmb_entry { + unsigned long vpn; + unsigned long ppn; + unsigned long flags; + + /* + * 0 .. NR_PMB_ENTRIES for specific entry selection, or + * PMB_NO_ENTRY to search for a free one + */ + int entry; + + struct pmb_entry *next; + /* Adjacent entry link for contiguous multi-entry mappings */ + struct pmb_entry *link; +}; + +/* arch/sh/mm/pmb.c */ +int __set_pmb_entry(unsigned long vpn, unsigned long ppn, + unsigned long flags, int *entry); +int set_pmb_entry(struct pmb_entry *pmbe); +void clear_pmb_entry(struct pmb_entry *pmbe); +struct pmb_entry *pmb_alloc(unsigned long vpn, unsigned long ppn, + unsigned long flags); +void pmb_free(struct pmb_entry *pmbe); +long pmb_remap(unsigned long virt, unsigned long phys, + unsigned long size, unsigned long flags); +void pmb_unmap(unsigned long addr); + +#endif /* __MMU_H */ + diff --git a/arch/sh/include/asm/mmu_context.h b/arch/sh/include/asm/mmu_context.h new file mode 100644 index 000000000000..04c0c9733ad6 --- /dev/null +++ b/arch/sh/include/asm/mmu_context.h @@ -0,0 +1,185 @@ +/* + * Copyright (C) 1999 Niibe Yutaka + * Copyright (C) 2003 - 2007 Paul Mundt + * + * ASID handling idea taken from MIPS implementation. + */ +#ifndef __ASM_SH_MMU_CONTEXT_H +#define __ASM_SH_MMU_CONTEXT_H + +#ifdef __KERNEL__ +#include <cpu/mmu_context.h> +#include <asm/tlbflush.h> +#include <asm/uaccess.h> +#include <asm/io.h> +#include <asm-generic/mm_hooks.h> + +/* + * The MMU "context" consists of two things: + * (a) TLB cache version (or round, cycle whatever expression you like) + * (b) ASID (Address Space IDentifier) + */ +#define MMU_CONTEXT_ASID_MASK 0x000000ff +#define MMU_CONTEXT_VERSION_MASK 0xffffff00 +#define MMU_CONTEXT_FIRST_VERSION 0x00000100 +#define NO_CONTEXT 0 + +/* ASID is 8-bit value, so it can't be 0x100 */ +#define MMU_NO_ASID 0x100 + +#define asid_cache(cpu) (cpu_data[cpu].asid_cache) + +#ifdef CONFIG_MMU +#define cpu_context(cpu, mm) ((mm)->context.id[cpu]) + +#define cpu_asid(cpu, mm) \ + (cpu_context((cpu), (mm)) & MMU_CONTEXT_ASID_MASK) + +/* + * Virtual Page Number mask + */ +#define MMU_VPN_MASK 0xfffff000 + +#if defined(CONFIG_SUPERH32) +#include "mmu_context_32.h" +#else +#include "mmu_context_64.h" +#endif + +/* + * Get MMU context if needed. + */ +static inline void get_mmu_context(struct mm_struct *mm, unsigned int cpu) +{ + unsigned long asid = asid_cache(cpu); + + /* Check if we have old version of context. */ + if (((cpu_context(cpu, mm) ^ asid) & MMU_CONTEXT_VERSION_MASK) == 0) + /* It's up to date, do nothing */ + return; + + /* It's old, we need to get new context with new version. */ + if (!(++asid & MMU_CONTEXT_ASID_MASK)) { + /* + * We exhaust ASID of this version. + * Flush all TLB and start new cycle. + */ + flush_tlb_all(); + +#ifdef CONFIG_SUPERH64 + /* + * The SH-5 cache uses the ASIDs, requiring both the I and D + * cache to be flushed when the ASID is exhausted. Weak. + */ + flush_cache_all(); +#endif + + /* + * Fix version; Note that we avoid version #0 + * to distingush NO_CONTEXT. + */ + if (!asid) + asid = MMU_CONTEXT_FIRST_VERSION; + } + + cpu_context(cpu, mm) = asid_cache(cpu) = asid; +} + +/* + * Initialize the context related info for a new mm_struct + * instance. + */ +static inline int init_new_context(struct task_struct *tsk, + struct mm_struct *mm) +{ + int i; + + for (i = 0; i < num_online_cpus(); i++) + cpu_context(i, mm) = NO_CONTEXT; + + return 0; +} + +/* + * After we have set current->mm to a new value, this activates + * the context for the new mm so we see the new mappings. + */ +static inline void activate_context(struct mm_struct *mm, unsigned int cpu) +{ + get_mmu_context(mm, cpu); + set_asid(cpu_asid(cpu, mm)); +} + +static inline void switch_mm(struct mm_struct *prev, + struct mm_struct *next, + struct task_struct *tsk) +{ + unsigned int cpu = smp_processor_id(); + + if (likely(prev != next)) { + cpu_set(cpu, next->cpu_vm_mask); + set_TTB(next->pgd); + activate_context(next, cpu); + } else + if (!cpu_test_and_set(cpu, next->cpu_vm_mask)) + activate_context(next, cpu); +} +#else +#define get_mmu_context(mm) do { } while (0) +#define init_new_context(tsk,mm) (0) +#define destroy_context(mm) do { } while (0) +#define set_asid(asid) do { } while (0) +#define get_asid() (0) +#define cpu_asid(cpu, mm) ({ (void)cpu; 0; }) +#define switch_and_save_asid(asid) (0) +#define set_TTB(pgd) do { } while (0) +#define get_TTB() (0) +#define activate_context(mm,cpu) do { } while (0) +#define switch_mm(prev,next,tsk) do { } while (0) +#endif /* CONFIG_MMU */ + +#define activate_mm(prev, next) switch_mm((prev),(next),NULL) +#define deactivate_mm(tsk,mm) do { } while (0) +#define enter_lazy_tlb(mm,tsk) do { } while (0) + +#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4) +/* + * If this processor has an MMU, we need methods to turn it off/on .. + * paging_init() will also have to be updated for the processor in + * question. + */ +static inline void enable_mmu(void) +{ + unsigned int cpu = smp_processor_id(); + + /* Enable MMU */ + ctrl_outl(MMU_CONTROL_INIT, MMUCR); + ctrl_barrier(); + + if (asid_cache(cpu) == NO_CONTEXT) + asid_cache(cpu) = MMU_CONTEXT_FIRST_VERSION; + + set_asid(asid_cache(cpu) & MMU_CONTEXT_ASID_MASK); +} + +static inline void disable_mmu(void) +{ + unsigned long cr; + + cr = ctrl_inl(MMUCR); + cr &= ~MMU_CONTROL_INIT; + ctrl_outl(cr, MMUCR); + + ctrl_barrier(); +} +#else +/* + * MMU control handlers for processors lacking memory + * management hardware. + */ +#define enable_mmu() do { } while (0) +#define disable_mmu() do { } while (0) +#endif + +#endif /* __KERNEL__ */ +#endif /* __ASM_SH_MMU_CONTEXT_H */ diff --git a/arch/sh/include/asm/mmu_context_32.h b/arch/sh/include/asm/mmu_context_32.h new file mode 100644 index 000000000000..f4f9aebd68b7 --- /dev/null +++ b/arch/sh/include/asm/mmu_context_32.h @@ -0,0 +1,47 @@ +#ifndef __ASM_SH_MMU_CONTEXT_32_H +#define __ASM_SH_MMU_CONTEXT_32_H + +/* + * Destroy context related info for an mm_struct that is about + * to be put to rest. + */ +static inline void destroy_context(struct mm_struct *mm) +{ + /* Do nothing */ +} + +static inline void set_asid(unsigned long asid) +{ + unsigned long __dummy; + + __asm__ __volatile__ ("mov.l %2, %0\n\t" + "and %3, %0\n\t" + "or %1, %0\n\t" + "mov.l %0, %2" + : "=&r" (__dummy) + : "r" (asid), "m" (__m(MMU_PTEH)), + "r" (0xffffff00)); +} + +static inline unsigned long get_asid(void) +{ + unsigned long asid; + + __asm__ __volatile__ ("mov.l %1, %0" + : "=r" (asid) + : "m" (__m(MMU_PTEH))); + asid &= MMU_CONTEXT_ASID_MASK; + return asid; +} + +/* MMU_TTB is used for optimizing the fault handling. */ +static inline void set_TTB(pgd_t *pgd) +{ + ctrl_outl((unsigned long)pgd, MMU_TTB); +} + +static inline pgd_t *get_TTB(void) +{ + return (pgd_t *)ctrl_inl(MMU_TTB); +} +#endif /* __ASM_SH_MMU_CONTEXT_32_H */ diff --git a/arch/sh/include/asm/mmu_context_64.h b/arch/sh/include/asm/mmu_context_64.h new file mode 100644 index 000000000000..de121025d87f --- /dev/null +++ b/arch/sh/include/asm/mmu_context_64.h @@ -0,0 +1,78 @@ +#ifndef __ASM_SH_MMU_CONTEXT_64_H +#define __ASM_SH_MMU_CONTEXT_64_H + +/* + * sh64-specific mmu_context interface. + * + * Copyright (C) 2000, 2001 Paolo Alberelli + * Copyright (C) 2003 - 2007 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <cpu/registers.h> +#include <asm/cacheflush.h> + +#define SR_ASID_MASK 0xffffffffff00ffffULL +#define SR_ASID_SHIFT 16 + +/* + * Destroy context related info for an mm_struct that is about + * to be put to rest. + */ +static inline void destroy_context(struct mm_struct *mm) +{ + /* Well, at least free TLB entries */ + flush_tlb_mm(mm); +} + +static inline unsigned long get_asid(void) +{ + unsigned long long sr; + + asm volatile ("getcon " __SR ", %0\n\t" + : "=r" (sr)); + + sr = (sr >> SR_ASID_SHIFT) & MMU_CONTEXT_ASID_MASK; + return (unsigned long) sr; +} + +/* Set ASID into SR */ +static inline void set_asid(unsigned long asid) +{ + unsigned long long sr, pc; + + asm volatile ("getcon " __SR ", %0" : "=r" (sr)); + + sr = (sr & SR_ASID_MASK) | (asid << SR_ASID_SHIFT); + + /* + * It is possible that this function may be inlined and so to avoid + * the assembler reporting duplicate symbols we make use of the + * gas trick of generating symbols using numerics and forward + * reference. + */ + asm volatile ("movi 1, %1\n\t" + "shlli %1, 28, %1\n\t" + "or %0, %1, %1\n\t" + "putcon %1, " __SR "\n\t" + "putcon %0, " __SSR "\n\t" + "movi 1f, %1\n\t" + "ori %1, 1 , %1\n\t" + "putcon %1, " __SPC "\n\t" + "rte\n" + "1:\n\t" + : "=r" (sr), "=r" (pc) : "0" (sr)); +} + +/* arch/sh/kernel/cpu/sh5/entry.S */ +extern unsigned long switch_and_save_asid(unsigned long new_asid); + +/* No spare register to twiddle, so use a software cache */ +extern pgd_t *mmu_pdtp_cache; + +#define set_TTB(pgd) (mmu_pdtp_cache = (pgd)) +#define get_TTB() (mmu_pdtp_cache) + +#endif /* __ASM_SH_MMU_CONTEXT_64_H */ diff --git a/arch/sh/include/asm/mmzone.h b/arch/sh/include/asm/mmzone.h new file mode 100644 index 000000000000..2969253c4042 --- /dev/null +++ b/arch/sh/include/asm/mmzone.h @@ -0,0 +1,48 @@ +#ifndef __ASM_SH_MMZONE_H +#define __ASM_SH_MMZONE_H + +#ifdef __KERNEL__ + +#ifdef CONFIG_NEED_MULTIPLE_NODES +extern struct pglist_data *node_data[]; +#define NODE_DATA(nid) (node_data[nid]) + +#define node_start_pfn(nid) (NODE_DATA(nid)->node_start_pfn) +#define node_end_pfn(nid) (NODE_DATA(nid)->node_start_pfn + \ + NODE_DATA(nid)->node_spanned_pages) + +static inline int pfn_to_nid(unsigned long pfn) +{ + int nid; + + for (nid = 0; nid < MAX_NUMNODES; nid++) + if (pfn >= node_start_pfn(nid) && pfn <= node_end_pfn(nid)) + break; + + return nid; +} + +static inline struct pglist_data *pfn_to_pgdat(unsigned long pfn) +{ + return NODE_DATA(pfn_to_nid(pfn)); +} + +/* arch/sh/mm/numa.c */ +void __init setup_bootmem_node(int nid, unsigned long start, unsigned long end); +#else +static inline void +setup_bootmem_node(int nid, unsigned long start, unsigned long end) +{ +} +#endif /* CONFIG_NEED_MULTIPLE_NODES */ + +/* Platform specific mem init */ +void __init plat_mem_setup(void); + +/* arch/sh/kernel/setup.c */ +void __init setup_bootmem_allocator(unsigned long start_pfn); +void __init __add_active_range(unsigned int nid, unsigned long start_pfn, + unsigned long end_pfn); + +#endif /* __KERNEL__ */ +#endif /* __ASM_SH_MMZONE_H */ diff --git a/arch/sh/include/asm/module.h b/arch/sh/include/asm/module.h new file mode 100644 index 000000000000..46eccd331660 --- /dev/null +++ b/arch/sh/include/asm/module.h @@ -0,0 +1,44 @@ +#ifndef _ASM_SH_MODULE_H +#define _ASM_SH_MODULE_H + +/* + * This file contains the SH architecture specific module code. + */ + +struct mod_arch_specific { + /* Nothing to see here .. */ +}; + +#define Elf_Shdr Elf32_Shdr +#define Elf_Sym Elf32_Sym +#define Elf_Ehdr Elf32_Ehdr + +#ifdef CONFIG_CPU_LITTLE_ENDIAN +# ifdef CONFIG_CPU_SH2 +# define MODULE_PROC_FAMILY "SH2LE " +# elif defined CONFIG_CPU_SH3 +# define MODULE_PROC_FAMILY "SH3LE " +# elif defined CONFIG_CPU_SH4 +# define MODULE_PROC_FAMILY "SH4LE " +# elif defined CONFIG_CPU_SH5 +# define MODULE_PROC_FAMILY "SH5LE " +# else +# error unknown processor family +# endif +#else +# ifdef CONFIG_CPU_SH2 +# define MODULE_PROC_FAMILY "SH2BE " +# elif defined CONFIG_CPU_SH3 +# define MODULE_PROC_FAMILY "SH3BE " +# elif defined CONFIG_CPU_SH4 +# define MODULE_PROC_FAMILY "SH4BE " +# elif defined CONFIG_CPU_SH5 +# define MODULE_PROC_FAMILY "SH5BE " +# else +# error unknown processor family +# endif +#endif + +#define MODULE_ARCH_VERMAGIC MODULE_PROC_FAMILY + +#endif /* _ASM_SH_MODULE_H */ diff --git a/arch/sh/include/asm/msgbuf.h b/arch/sh/include/asm/msgbuf.h new file mode 100644 index 000000000000..517432343fb5 --- /dev/null +++ b/arch/sh/include/asm/msgbuf.h @@ -0,0 +1,31 @@ +#ifndef __ASM_SH_MSGBUF_H +#define __ASM_SH_MSGBUF_H + +/* + * The msqid64_ds structure for i386 architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 64-bit time_t to solve y2038 problem + * - 2 miscellaneous 32-bit values + */ + +struct msqid64_ds { + struct ipc64_perm msg_perm; + __kernel_time_t msg_stime; /* last msgsnd time */ + unsigned long __unused1; + __kernel_time_t msg_rtime; /* last msgrcv time */ + unsigned long __unused2; + __kernel_time_t msg_ctime; /* last change time */ + unsigned long __unused3; + unsigned long msg_cbytes; /* current number of bytes on queue */ + unsigned long msg_qnum; /* number of messages in queue */ + unsigned long msg_qbytes; /* max number of bytes on queue */ + __kernel_pid_t msg_lspid; /* pid of last msgsnd */ + __kernel_pid_t msg_lrpid; /* last receive pid */ + unsigned long __unused4; + unsigned long __unused5; +}; + +#endif /* __ASM_SH_MSGBUF_H */ diff --git a/arch/sh/include/asm/mutex.h b/arch/sh/include/asm/mutex.h new file mode 100644 index 000000000000..458c1f7fbc18 --- /dev/null +++ b/arch/sh/include/asm/mutex.h @@ -0,0 +1,9 @@ +/* + * Pull in the generic implementation for the mutex fastpath. + * + * TODO: implement optimized primitives instead, or leave the generic + * implementation in place, or pick the atomic_xchg() based generic + * implementation. (see asm-generic/mutex-xchg.h for details) + */ + +#include <asm-generic/mutex-dec.h> diff --git a/arch/sh/include/asm/page.h b/arch/sh/include/asm/page.h new file mode 100644 index 000000000000..77fb8bf02e4e --- /dev/null +++ b/arch/sh/include/asm/page.h @@ -0,0 +1,183 @@ +#ifndef __ASM_SH_PAGE_H +#define __ASM_SH_PAGE_H + +/* + * Copyright (C) 1999 Niibe Yutaka + */ + +#include <linux/const.h> + +/* PAGE_SHIFT determines the page size */ +#if defined(CONFIG_PAGE_SIZE_4KB) +# define PAGE_SHIFT 12 +#elif defined(CONFIG_PAGE_SIZE_8KB) +# define PAGE_SHIFT 13 +#elif defined(CONFIG_PAGE_SIZE_16KB) +# define PAGE_SHIFT 14 +#elif defined(CONFIG_PAGE_SIZE_64KB) +# define PAGE_SHIFT 16 +#else +# error "Bogus kernel page size?" +#endif + +#define PAGE_SIZE (_AC(1, UL) << PAGE_SHIFT) +#define PAGE_MASK (~(PAGE_SIZE-1)) +#define PTE_MASK PAGE_MASK + +#if defined(CONFIG_HUGETLB_PAGE_SIZE_64K) +#define HPAGE_SHIFT 16 +#elif defined(CONFIG_HUGETLB_PAGE_SIZE_256K) +#define HPAGE_SHIFT 18 +#elif defined(CONFIG_HUGETLB_PAGE_SIZE_1MB) +#define HPAGE_SHIFT 20 +#elif defined(CONFIG_HUGETLB_PAGE_SIZE_4MB) +#define HPAGE_SHIFT 22 +#elif defined(CONFIG_HUGETLB_PAGE_SIZE_64MB) +#define HPAGE_SHIFT 26 +#elif defined(CONFIG_HUGETLB_PAGE_SIZE_512MB) +#define HPAGE_SHIFT 29 +#endif + +#ifdef CONFIG_HUGETLB_PAGE +#define HPAGE_SIZE (1UL << HPAGE_SHIFT) +#define HPAGE_MASK (~(HPAGE_SIZE-1)) +#define HUGETLB_PAGE_ORDER (HPAGE_SHIFT-PAGE_SHIFT) +#endif + +#ifndef __ASSEMBLY__ + +extern unsigned long shm_align_mask; +extern unsigned long max_low_pfn, min_low_pfn; +extern unsigned long memory_start, memory_end; + +extern void clear_page(void *to); +extern void copy_page(void *to, void *from); + +#if !defined(CONFIG_CACHE_OFF) && defined(CONFIG_MMU) && \ + (defined(CONFIG_CPU_SH5) || defined(CONFIG_CPU_SH4) || \ + defined(CONFIG_SH7705_CACHE_32KB)) +struct page; +struct vm_area_struct; +extern void clear_user_page(void *to, unsigned long address, struct page *page); +extern void copy_user_page(void *to, void *from, unsigned long address, + struct page *page); +#if defined(CONFIG_CPU_SH4) +extern void copy_user_highpage(struct page *to, struct page *from, + unsigned long vaddr, struct vm_area_struct *vma); +#define __HAVE_ARCH_COPY_USER_HIGHPAGE +#endif +#else +#define clear_user_page(page, vaddr, pg) clear_page(page) +#define copy_user_page(to, from, vaddr, pg) copy_page(to, from) +#endif + +/* + * These are used to make use of C type-checking.. + */ +#ifdef CONFIG_X2TLB +typedef struct { unsigned long pte_low, pte_high; } pte_t; +typedef struct { unsigned long long pgprot; } pgprot_t; +typedef struct { unsigned long long pgd; } pgd_t; +#define pte_val(x) \ + ((x).pte_low | ((unsigned long long)(x).pte_high << 32)) +#define __pte(x) \ + ({ pte_t __pte = {(x), ((unsigned long long)(x)) >> 32}; __pte; }) +#elif defined(CONFIG_SUPERH32) +typedef struct { unsigned long pte_low; } pte_t; +typedef struct { unsigned long pgprot; } pgprot_t; +typedef struct { unsigned long pgd; } pgd_t; +#define pte_val(x) ((x).pte_low) +#define __pte(x) ((pte_t) { (x) } ) +#else +typedef struct { unsigned long long pte_low; } pte_t; +typedef struct { unsigned long pgprot; } pgprot_t; +typedef struct { unsigned long pgd; } pgd_t; +#define pte_val(x) ((x).pte_low) +#define __pte(x) ((pte_t) { (x) } ) +#endif + +#define pgd_val(x) ((x).pgd) +#define pgprot_val(x) ((x).pgprot) + +#define __pgd(x) ((pgd_t) { (x) } ) +#define __pgprot(x) ((pgprot_t) { (x) } ) + +typedef struct page *pgtable_t; + +#endif /* !__ASSEMBLY__ */ + +/* + * __MEMORY_START and SIZE are the physical addresses and size of RAM. + */ +#define __MEMORY_START CONFIG_MEMORY_START +#define __MEMORY_SIZE CONFIG_MEMORY_SIZE + +/* + * PAGE_OFFSET is the virtual address of the start of kernel address + * space. + */ +#define PAGE_OFFSET CONFIG_PAGE_OFFSET + +/* + * Virtual to physical RAM address translation. + * + * In 29 bit mode, the physical offset of RAM from address 0 is visible in + * the kernel virtual address space, and thus we don't have to take + * this into account when translating. However in 32 bit mode this offset + * is not visible (it is part of the PMB mapping) and so needs to be + * added or subtracted as required. + */ +#ifdef CONFIG_32BIT +#define __pa(x) ((unsigned long)(x)-PAGE_OFFSET+__MEMORY_START) +#define __va(x) ((void *)((unsigned long)(x)+PAGE_OFFSET-__MEMORY_START)) +#else +#define __pa(x) ((unsigned long)(x)-PAGE_OFFSET) +#define __va(x) ((void *)((unsigned long)(x)+PAGE_OFFSET)) +#endif + +#define pfn_to_kaddr(pfn) __va((pfn) << PAGE_SHIFT) +#define page_to_phys(page) (page_to_pfn(page) << PAGE_SHIFT) + +/* + * PFN = physical frame number (ie PFN 0 == physical address 0) + * PFN_START is the PFN of the first page of RAM. By defining this we + * don't have struct page entries for the portion of address space + * between physical address 0 and the start of RAM. + */ +#define PFN_START (__MEMORY_START >> PAGE_SHIFT) +#define ARCH_PFN_OFFSET (PFN_START) +#define virt_to_page(kaddr) pfn_to_page(__pa(kaddr) >> PAGE_SHIFT) +#ifdef CONFIG_FLATMEM +#define pfn_valid(pfn) ((pfn) >= min_low_pfn && (pfn) < max_low_pfn) +#endif +#define virt_addr_valid(kaddr) pfn_valid(__pa(kaddr) >> PAGE_SHIFT) + +#define VM_DATA_DEFAULT_FLAGS (VM_READ | VM_WRITE | VM_EXEC | \ + VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC) + +#include <asm-generic/memory_model.h> +#include <asm-generic/page.h> + +/* vDSO support */ +#ifdef CONFIG_VSYSCALL +#define __HAVE_ARCH_GATE_AREA +#endif + +/* + * Some drivers need to perform DMA into kmalloc'ed buffers + * and so we have to increase the kmalloc minalign for this. + */ +#define ARCH_KMALLOC_MINALIGN L1_CACHE_BYTES + +#ifdef CONFIG_SUPERH64 +/* + * While BYTES_PER_WORD == 4 on the current sh64 ABI, GCC will still + * happily generate {ld/st}.q pairs, requiring us to have 8-byte + * alignment to avoid traps. The kmalloc alignment is gauranteed by + * virtue of L1_CACHE_BYTES, requiring this to only be special cased + * for slab caches. + */ +#define ARCH_SLAB_MINALIGN 8 +#endif + +#endif /* __ASM_SH_PAGE_H */ diff --git a/arch/sh/include/asm/param.h b/arch/sh/include/asm/param.h new file mode 100644 index 000000000000..ae245afdfd6a --- /dev/null +++ b/arch/sh/include/asm/param.h @@ -0,0 +1,22 @@ +#ifndef __ASM_SH_PARAM_H +#define __ASM_SH_PARAM_H + +#ifdef __KERNEL__ +# define HZ CONFIG_HZ +# define USER_HZ 100 /* User interfaces are in "ticks" */ +# define CLOCKS_PER_SEC (USER_HZ) /* frequency at which times() counts */ +#endif + +#ifndef HZ +#define HZ 100 +#endif + +#define EXEC_PAGESIZE 4096 + +#ifndef NOGROUP +#define NOGROUP (-1) +#endif + +#define MAXHOSTNAMELEN 64 /* max length of hostname */ + +#endif /* __ASM_SH_PARAM_H */ diff --git a/arch/sh/include/asm/parport.h b/arch/sh/include/asm/parport.h new file mode 100644 index 000000000000..f67ba60a2acd --- /dev/null +++ b/arch/sh/include/asm/parport.h @@ -0,0 +1,16 @@ +/* + * Copyright (C) 1999, 2000 Tim Waugh <tim@cyberelk.demon.co.uk> + * + * This file should only be included by drivers/parport/parport_pc.c. + */ +#ifndef __ASM_SH_PARPORT_H +#define __ASM_SH_PARPORT_H + +static int __devinit parport_pc_find_isa_ports(int autoirq, int autodma); + +static int __devinit parport_pc_find_nonpci_ports(int autoirq, int autodma) +{ + return parport_pc_find_isa_ports(autoirq, autodma); +} + +#endif /* __ASM_SH_PARPORT_H */ diff --git a/arch/sh/include/asm/pci.h b/arch/sh/include/asm/pci.h new file mode 100644 index 000000000000..df1d383e18a5 --- /dev/null +++ b/arch/sh/include/asm/pci.h @@ -0,0 +1,144 @@ +#ifndef __ASM_SH_PCI_H +#define __ASM_SH_PCI_H + +#ifdef __KERNEL__ + +#include <linux/dma-mapping.h> + +/* Can be used to override the logic in pci_scan_bus for skipping + already-configured bus numbers - to be used for buggy BIOSes + or architectures with incomplete PCI setup by the loader */ + +#define pcibios_assign_all_busses() 1 +#define pcibios_scan_all_fns(a, b) 0 + +/* + * A board can define one or more PCI channels that represent built-in (or + * external) PCI controllers. + */ +struct pci_channel { + struct pci_ops *pci_ops; + struct resource *io_resource; + struct resource *mem_resource; + int first_devfn; + int last_devfn; +}; + +/* + * Each board initializes this array and terminates it with a NULL entry. + */ +extern struct pci_channel board_pci_channels[]; + +#define PCIBIOS_MIN_IO board_pci_channels->io_resource->start +#define PCIBIOS_MIN_MEM board_pci_channels->mem_resource->start + +/* + * I/O routine helpers + */ +#if defined(CONFIG_CPU_SUBTYPE_SH7780) || defined(CONFIG_CPU_SUBTYPE_SH7785) +#define PCI_IO_AREA 0xFE400000 +#define PCI_IO_SIZE 0x00400000 +#elif defined(CONFIG_CPU_SH5) +extern unsigned long PCI_IO_AREA; +#define PCI_IO_SIZE 0x00010000 +#else +#define PCI_IO_AREA 0xFE240000 +#define PCI_IO_SIZE 0x00040000 +#endif + +#define PCI_MEM_SIZE 0x01000000 + +#define SH4_PCIIOBR_MASK 0xFFFC0000 +#define pci_ioaddr(addr) (PCI_IO_AREA + (addr & ~SH4_PCIIOBR_MASK)) + +#if defined(CONFIG_PCI) +#define is_pci_ioaddr(port) \ + (((port) >= PCIBIOS_MIN_IO) && \ + ((port) < (PCIBIOS_MIN_IO + PCI_IO_SIZE))) +#define is_pci_memaddr(port) \ + (((port) >= PCIBIOS_MIN_MEM) && \ + ((port) < (PCIBIOS_MIN_MEM + PCI_MEM_SIZE))) +#else +#define is_pci_ioaddr(port) (0) +#define is_pci_memaddr(port) (0) +#endif + +struct pci_dev; + +extern void pcibios_set_master(struct pci_dev *dev); + +static inline void pcibios_penalize_isa_irq(int irq, int active) +{ + /* We don't do dynamic PCI IRQ allocation */ +} + +/* Dynamic DMA mapping stuff. + * SuperH has everything mapped statically like x86. + */ + +/* The PCI address space does equal the physical memory + * address space. The networking and block device layers use + * this boolean for bounce buffer decisions. + */ +#define PCI_DMA_BUS_IS_PHYS (1) + +#include <linux/types.h> +#include <linux/slab.h> +#include <asm/scatterlist.h> +#include <linux/string.h> +#include <asm/io.h> + +/* pci_unmap_{single,page} being a nop depends upon the + * configuration. + */ +#ifdef CONFIG_SH_PCIDMA_NONCOHERENT +#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) \ + dma_addr_t ADDR_NAME; +#define DECLARE_PCI_UNMAP_LEN(LEN_NAME) \ + __u32 LEN_NAME; +#define pci_unmap_addr(PTR, ADDR_NAME) \ + ((PTR)->ADDR_NAME) +#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) \ + (((PTR)->ADDR_NAME) = (VAL)) +#define pci_unmap_len(PTR, LEN_NAME) \ + ((PTR)->LEN_NAME) +#define pci_unmap_len_set(PTR, LEN_NAME, VAL) \ + (((PTR)->LEN_NAME) = (VAL)) +#else +#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) +#define DECLARE_PCI_UNMAP_LEN(LEN_NAME) +#define pci_unmap_addr(PTR, ADDR_NAME) (0) +#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) do { } while (0) +#define pci_unmap_len(PTR, LEN_NAME) (0) +#define pci_unmap_len_set(PTR, LEN_NAME, VAL) do { } while (0) +#endif + +#ifdef CONFIG_PCI +static inline void pci_dma_burst_advice(struct pci_dev *pdev, + enum pci_dma_burst_strategy *strat, + unsigned long *strategy_parameter) +{ + *strat = PCI_DMA_BURST_INFINITY; + *strategy_parameter = ~0UL; +} +#endif + +/* Board-specific fixup routines. */ +void pcibios_fixup(void); +int pcibios_init_platform(void); +int pcibios_map_platform_irq(struct pci_dev *dev, u8 slot, u8 pin); + +#ifdef CONFIG_PCI_AUTO +int pciauto_assign_resources(int busno, struct pci_channel *hose); +#endif + +#endif /* __KERNEL__ */ + +/* generic pci stuff */ +#include <asm-generic/pci.h> + +/* generic DMA-mapping stuff */ +#include <asm-generic/pci-dma-compat.h> + +#endif /* __ASM_SH_PCI_H */ + diff --git a/arch/sh/include/asm/percpu.h b/arch/sh/include/asm/percpu.h new file mode 100644 index 000000000000..4db4b39a4399 --- /dev/null +++ b/arch/sh/include/asm/percpu.h @@ -0,0 +1,6 @@ +#ifndef __ARCH_SH_PERCPU +#define __ARCH_SH_PERCPU + +#include <asm-generic/percpu.h> + +#endif /* __ARCH_SH_PERCPU */ diff --git a/arch/sh/include/asm/pgalloc.h b/arch/sh/include/asm/pgalloc.h new file mode 100644 index 000000000000..84dd2db7104c --- /dev/null +++ b/arch/sh/include/asm/pgalloc.h @@ -0,0 +1,96 @@ +#ifndef __ASM_SH_PGALLOC_H +#define __ASM_SH_PGALLOC_H + +#include <linux/quicklist.h> +#include <asm/page.h> + +#define QUICK_PGD 0 /* We preserve special mappings over free */ +#define QUICK_PT 1 /* Other page table pages that are zero on free */ + +static inline void pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmd, + pte_t *pte) +{ + set_pmd(pmd, __pmd((unsigned long)pte)); +} + +static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd, + pgtable_t pte) +{ + set_pmd(pmd, __pmd((unsigned long)page_address(pte))); +} +#define pmd_pgtable(pmd) pmd_page(pmd) + +static inline void pgd_ctor(void *x) +{ + pgd_t *pgd = x; + + memcpy(pgd + USER_PTRS_PER_PGD, + swapper_pg_dir + USER_PTRS_PER_PGD, + (PTRS_PER_PGD - USER_PTRS_PER_PGD) * sizeof(pgd_t)); +} + +/* + * Allocate and free page tables. + */ +static inline pgd_t *pgd_alloc(struct mm_struct *mm) +{ + return quicklist_alloc(QUICK_PGD, GFP_KERNEL | __GFP_REPEAT, pgd_ctor); +} + +static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd) +{ + quicklist_free(QUICK_PGD, NULL, pgd); +} + +static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm, + unsigned long address) +{ + return quicklist_alloc(QUICK_PT, GFP_KERNEL | __GFP_REPEAT, NULL); +} + +static inline pgtable_t pte_alloc_one(struct mm_struct *mm, + unsigned long address) +{ + struct page *page; + void *pg; + + pg = quicklist_alloc(QUICK_PT, GFP_KERNEL | __GFP_REPEAT, NULL); + if (!pg) + return NULL; + page = virt_to_page(pg); + pgtable_page_ctor(page); + return page; +} + +static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte) +{ + quicklist_free(QUICK_PT, NULL, pte); +} + +static inline void pte_free(struct mm_struct *mm, pgtable_t pte) +{ + pgtable_page_dtor(pte); + quicklist_free_page(QUICK_PT, NULL, pte); +} + +#define __pte_free_tlb(tlb,pte) \ +do { \ + pgtable_page_dtor(pte); \ + tlb_remove_page((tlb), (pte)); \ +} while (0) + +/* + * allocating and freeing a pmd is trivial: the 1-entry pmd is + * inside the pgd, so has no extra memory associated with it. + */ + +#define pmd_free(mm, x) do { } while (0) +#define __pmd_free_tlb(tlb,x) do { } while (0) + +static inline void check_pgt_cache(void) +{ + quicklist_trim(QUICK_PGD, NULL, 25, 16); + quicklist_trim(QUICK_PT, NULL, 25, 16); +} + +#endif /* __ASM_SH_PGALLOC_H */ diff --git a/arch/sh/include/asm/pgtable.h b/arch/sh/include/asm/pgtable.h new file mode 100644 index 000000000000..a4a8f8b93463 --- /dev/null +++ b/arch/sh/include/asm/pgtable.h @@ -0,0 +1,152 @@ +/* + * This file contains the functions and defines necessary to modify and + * use the SuperH page table tree. + * + * Copyright (C) 1999 Niibe Yutaka + * Copyright (C) 2002 - 2007 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file "COPYING" in the main directory of this + * archive for more details. + */ +#ifndef __ASM_SH_PGTABLE_H +#define __ASM_SH_PGTABLE_H + +#include <asm-generic/pgtable-nopmd.h> +#include <asm/page.h> + +#ifndef __ASSEMBLY__ +#include <asm/addrspace.h> +#include <asm/fixmap.h> + +/* + * ZERO_PAGE is a global shared page that is always zero: used + * for zero-mapped memory areas etc.. + */ +extern unsigned long empty_zero_page[PAGE_SIZE / sizeof(unsigned long)]; +#define ZERO_PAGE(vaddr) (virt_to_page(empty_zero_page)) + +#endif /* !__ASSEMBLY__ */ + +/* + * Effective and physical address definitions, to aid with sign + * extension. + */ +#define NEFF 32 +#define NEFF_SIGN (1LL << (NEFF - 1)) +#define NEFF_MASK (-1LL << NEFF) + +#ifdef CONFIG_29BIT +#define NPHYS 29 +#else +#define NPHYS 32 +#endif + +#define NPHYS_SIGN (1LL << (NPHYS - 1)) +#define NPHYS_MASK (-1LL << NPHYS) + +/* + * traditional two-level paging structure + */ +/* PTE bits */ +#if defined(CONFIG_X2TLB) || defined(CONFIG_SUPERH64) +# define PTE_MAGNITUDE 3 /* 64-bit PTEs on extended mode SH-X2 TLB */ +#else +# define PTE_MAGNITUDE 2 /* 32-bit PTEs */ +#endif +#define PTE_SHIFT PAGE_SHIFT +#define PTE_BITS (PTE_SHIFT - PTE_MAGNITUDE) + +/* PGD bits */ +#define PGDIR_SHIFT (PTE_SHIFT + PTE_BITS) +#define PGDIR_SIZE (1UL << PGDIR_SHIFT) +#define PGDIR_MASK (~(PGDIR_SIZE-1)) + +/* Entries per level */ +#define PTRS_PER_PTE (PAGE_SIZE / (1 << PTE_MAGNITUDE)) +#define PTRS_PER_PGD (PAGE_SIZE / sizeof(pgd_t)) + +#define USER_PTRS_PER_PGD (TASK_SIZE/PGDIR_SIZE) +#define FIRST_USER_ADDRESS 0 + +#ifdef CONFIG_32BIT +#define PHYS_ADDR_MASK 0xffffffff +#else +#define PHYS_ADDR_MASK 0x1fffffff +#endif + +#define PTE_PHYS_MASK (PHYS_ADDR_MASK & PAGE_MASK) + +#ifdef CONFIG_SUPERH32 +#define VMALLOC_START (P3SEG) +#else +#define VMALLOC_START (0xf0000000) +#endif +#define VMALLOC_END (FIXADDR_START-2*PAGE_SIZE) + +#if defined(CONFIG_SUPERH32) +#include <asm/pgtable_32.h> +#else +#include <asm/pgtable_64.h> +#endif + +/* + * SH-X and lower (legacy) SuperH parts (SH-3, SH-4, some SH-4A) can't do page + * protection for execute, and considers it the same as a read. Also, write + * permission implies read permission. This is the closest we can get.. + * + * SH-X2 (SH7785) and later parts take this to the opposite end of the extreme, + * not only supporting separate execute, read, and write bits, but having + * completely separate permission bits for user and kernel space. + */ + /*xwr*/ +#define __P000 PAGE_NONE +#define __P001 PAGE_READONLY +#define __P010 PAGE_COPY +#define __P011 PAGE_COPY +#define __P100 PAGE_EXECREAD +#define __P101 PAGE_EXECREAD +#define __P110 PAGE_COPY +#define __P111 PAGE_COPY + +#define __S000 PAGE_NONE +#define __S001 PAGE_READONLY +#define __S010 PAGE_WRITEONLY +#define __S011 PAGE_SHARED +#define __S100 PAGE_EXECREAD +#define __S101 PAGE_EXECREAD +#define __S110 PAGE_RWX +#define __S111 PAGE_RWX + +typedef pte_t *pte_addr_t; + +#define kern_addr_valid(addr) (1) + +#define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \ + remap_pfn_range(vma, vaddr, pfn, size, prot) + +#define pte_pfn(x) ((unsigned long)(((x).pte_low >> PAGE_SHIFT))) + +/* + * No page table caches to initialise + */ +#define pgtable_cache_init() do { } while (0) + +#if !defined(CONFIG_CACHE_OFF) && (defined(CONFIG_CPU_SH4) || \ + defined(CONFIG_SH7705_CACHE_32KB)) +struct mm_struct; +#define __HAVE_ARCH_PTEP_GET_AND_CLEAR +pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep); +#endif + +struct vm_area_struct; +extern void update_mmu_cache(struct vm_area_struct * vma, + unsigned long address, pte_t pte); +extern pgd_t swapper_pg_dir[PTRS_PER_PGD]; +extern void paging_init(void); +extern void page_table_range_init(unsigned long start, unsigned long end, + pgd_t *pgd); + +#include <asm-generic/pgtable.h> + +#endif /* __ASM_SH_PGTABLE_H */ diff --git a/arch/sh/include/asm/pgtable_32.h b/arch/sh/include/asm/pgtable_32.h new file mode 100644 index 000000000000..72ea209195bd --- /dev/null +++ b/arch/sh/include/asm/pgtable_32.h @@ -0,0 +1,479 @@ +#ifndef __ASM_SH_PGTABLE_32_H +#define __ASM_SH_PGTABLE_32_H + +/* + * Linux PTEL encoding. + * + * Hardware and software bit definitions for the PTEL value (see below for + * notes on SH-X2 MMUs and 64-bit PTEs): + * + * - Bits 0 and 7 are reserved on SH-3 (_PAGE_WT and _PAGE_SZ1 on SH-4). + * + * - Bit 1 is the SH-bit, but is unused on SH-3 due to an MMU bug (the + * hardware PTEL value can't have the SH-bit set when MMUCR.IX is set, + * which is the default in cpu-sh3/mmu_context.h:MMU_CONTROL_INIT). + * + * In order to keep this relatively clean, do not use these for defining + * SH-3 specific flags until all of the other unused bits have been + * exhausted. + * + * - Bit 9 is reserved by everyone and used by _PAGE_PROTNONE. + * + * - Bits 10 and 11 are low bits of the PPN that are reserved on >= 4K pages. + * Bit 10 is used for _PAGE_ACCESSED, bit 11 remains unused. + * + * - On 29 bit platforms, bits 31 to 29 are used for the space attributes + * and timing control which (together with bit 0) are moved into the + * old-style PTEA on the parts that support it. + * + * XXX: Leave the _PAGE_FILE and _PAGE_WT overhaul for a rainy day. + * + * SH-X2 MMUs and extended PTEs + * + * SH-X2 supports an extended mode TLB with split data arrays due to the + * number of bits needed for PR and SZ (now EPR and ESZ) encodings. The PR and + * SZ bit placeholders still exist in data array 1, but are implemented as + * reserved bits, with the real logic existing in data array 2. + * + * The downside to this is that we can no longer fit everything in to a 32-bit + * PTE encoding, so a 64-bit pte_t is necessary for these parts. On the plus + * side, this gives us quite a few spare bits to play with for future usage. + */ +/* Legacy and compat mode bits */ +#define _PAGE_WT 0x001 /* WT-bit on SH-4, 0 on SH-3 */ +#define _PAGE_HW_SHARED 0x002 /* SH-bit : shared among processes */ +#define _PAGE_DIRTY 0x004 /* D-bit : page changed */ +#define _PAGE_CACHABLE 0x008 /* C-bit : cachable */ +#define _PAGE_SZ0 0x010 /* SZ0-bit : Size of page */ +#define _PAGE_RW 0x020 /* PR0-bit : write access allowed */ +#define _PAGE_USER 0x040 /* PR1-bit : user space access allowed*/ +#define _PAGE_SZ1 0x080 /* SZ1-bit : Size of page (on SH-4) */ +#define _PAGE_PRESENT 0x100 /* V-bit : page is valid */ +#define _PAGE_PROTNONE 0x200 /* software: if not present */ +#define _PAGE_ACCESSED 0x400 /* software: page referenced */ +#define _PAGE_FILE _PAGE_WT /* software: pagecache or swap? */ + +#define _PAGE_SZ_MASK (_PAGE_SZ0 | _PAGE_SZ1) +#define _PAGE_PR_MASK (_PAGE_RW | _PAGE_USER) + +/* Extended mode bits */ +#define _PAGE_EXT_ESZ0 0x0010 /* ESZ0-bit: Size of page */ +#define _PAGE_EXT_ESZ1 0x0020 /* ESZ1-bit: Size of page */ +#define _PAGE_EXT_ESZ2 0x0040 /* ESZ2-bit: Size of page */ +#define _PAGE_EXT_ESZ3 0x0080 /* ESZ3-bit: Size of page */ + +#define _PAGE_EXT_USER_EXEC 0x0100 /* EPR0-bit: User space executable */ +#define _PAGE_EXT_USER_WRITE 0x0200 /* EPR1-bit: User space writable */ +#define _PAGE_EXT_USER_READ 0x0400 /* EPR2-bit: User space readable */ + +#define _PAGE_EXT_KERN_EXEC 0x0800 /* EPR3-bit: Kernel space executable */ +#define _PAGE_EXT_KERN_WRITE 0x1000 /* EPR4-bit: Kernel space writable */ +#define _PAGE_EXT_KERN_READ 0x2000 /* EPR5-bit: Kernel space readable */ + +/* Wrapper for extended mode pgprot twiddling */ +#define _PAGE_EXT(x) ((unsigned long long)(x) << 32) + +/* software: moves to PTEA.TC (Timing Control) */ +#define _PAGE_PCC_AREA5 0x00000000 /* use BSC registers for area5 */ +#define _PAGE_PCC_AREA6 0x80000000 /* use BSC registers for area6 */ + +/* software: moves to PTEA.SA[2:0] (Space Attributes) */ +#define _PAGE_PCC_IODYN 0x00000001 /* IO space, dynamically sized bus */ +#define _PAGE_PCC_IO8 0x20000000 /* IO space, 8 bit bus */ +#define _PAGE_PCC_IO16 0x20000001 /* IO space, 16 bit bus */ +#define _PAGE_PCC_COM8 0x40000000 /* Common Memory space, 8 bit bus */ +#define _PAGE_PCC_COM16 0x40000001 /* Common Memory space, 16 bit bus */ +#define _PAGE_PCC_ATR8 0x60000000 /* Attribute Memory space, 8 bit bus */ +#define _PAGE_PCC_ATR16 0x60000001 /* Attribute Memory space, 6 bit bus */ + +/* Mask which drops unused bits from the PTEL value */ +#if defined(CONFIG_CPU_SH3) +#define _PAGE_CLEAR_FLAGS (_PAGE_PROTNONE | _PAGE_ACCESSED| \ + _PAGE_FILE | _PAGE_SZ1 | \ + _PAGE_HW_SHARED) +#elif defined(CONFIG_X2TLB) +/* Get rid of the legacy PR/SZ bits when using extended mode */ +#define _PAGE_CLEAR_FLAGS (_PAGE_PROTNONE | _PAGE_ACCESSED | \ + _PAGE_FILE | _PAGE_PR_MASK | _PAGE_SZ_MASK) +#else +#define _PAGE_CLEAR_FLAGS (_PAGE_PROTNONE | _PAGE_ACCESSED | _PAGE_FILE) +#endif + +#define _PAGE_FLAGS_HARDWARE_MASK (PHYS_ADDR_MASK & ~(_PAGE_CLEAR_FLAGS)) + +/* Hardware flags, page size encoding */ +#if !defined(CONFIG_MMU) +# define _PAGE_FLAGS_HARD 0ULL +#elif defined(CONFIG_X2TLB) +# if defined(CONFIG_PAGE_SIZE_4KB) +# define _PAGE_FLAGS_HARD _PAGE_EXT(_PAGE_EXT_ESZ0) +# elif defined(CONFIG_PAGE_SIZE_8KB) +# define _PAGE_FLAGS_HARD _PAGE_EXT(_PAGE_EXT_ESZ1) +# elif defined(CONFIG_PAGE_SIZE_64KB) +# define _PAGE_FLAGS_HARD _PAGE_EXT(_PAGE_EXT_ESZ2) +# endif +#else +# if defined(CONFIG_PAGE_SIZE_4KB) +# define _PAGE_FLAGS_HARD _PAGE_SZ0 +# elif defined(CONFIG_PAGE_SIZE_64KB) +# define _PAGE_FLAGS_HARD _PAGE_SZ1 +# endif +#endif + +#if defined(CONFIG_X2TLB) +# if defined(CONFIG_HUGETLB_PAGE_SIZE_64K) +# define _PAGE_SZHUGE (_PAGE_EXT_ESZ2) +# elif defined(CONFIG_HUGETLB_PAGE_SIZE_256K) +# define _PAGE_SZHUGE (_PAGE_EXT_ESZ0 | _PAGE_EXT_ESZ2) +# elif defined(CONFIG_HUGETLB_PAGE_SIZE_1MB) +# define _PAGE_SZHUGE (_PAGE_EXT_ESZ0 | _PAGE_EXT_ESZ1 | _PAGE_EXT_ESZ2) +# elif defined(CONFIG_HUGETLB_PAGE_SIZE_4MB) +# define _PAGE_SZHUGE (_PAGE_EXT_ESZ3) +# elif defined(CONFIG_HUGETLB_PAGE_SIZE_64MB) +# define _PAGE_SZHUGE (_PAGE_EXT_ESZ2 | _PAGE_EXT_ESZ3) +# endif +#else +# if defined(CONFIG_HUGETLB_PAGE_SIZE_64K) +# define _PAGE_SZHUGE (_PAGE_SZ1) +# elif defined(CONFIG_HUGETLB_PAGE_SIZE_1MB) +# define _PAGE_SZHUGE (_PAGE_SZ0 | _PAGE_SZ1) +# endif +#endif + +/* + * Stub out _PAGE_SZHUGE if we don't have a good definition for it, + * to make pte_mkhuge() happy. + */ +#ifndef _PAGE_SZHUGE +# define _PAGE_SZHUGE (_PAGE_FLAGS_HARD) +#endif + +#define _PAGE_CHG_MASK \ + (PTE_MASK | _PAGE_ACCESSED | _PAGE_CACHABLE | _PAGE_DIRTY) + +#ifndef __ASSEMBLY__ + +#if defined(CONFIG_X2TLB) /* SH-X2 TLB */ +#define PAGE_NONE __pgprot(_PAGE_PROTNONE | _PAGE_CACHABLE | \ + _PAGE_ACCESSED | _PAGE_FLAGS_HARD) + +#define PAGE_SHARED __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \ + _PAGE_CACHABLE | _PAGE_FLAGS_HARD | \ + _PAGE_EXT(_PAGE_EXT_KERN_READ | \ + _PAGE_EXT_KERN_WRITE | \ + _PAGE_EXT_USER_READ | \ + _PAGE_EXT_USER_WRITE)) + +#define PAGE_EXECREAD __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \ + _PAGE_CACHABLE | _PAGE_FLAGS_HARD | \ + _PAGE_EXT(_PAGE_EXT_KERN_EXEC | \ + _PAGE_EXT_KERN_READ | \ + _PAGE_EXT_USER_EXEC | \ + _PAGE_EXT_USER_READ)) + +#define PAGE_COPY PAGE_EXECREAD + +#define PAGE_READONLY __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \ + _PAGE_CACHABLE | _PAGE_FLAGS_HARD | \ + _PAGE_EXT(_PAGE_EXT_KERN_READ | \ + _PAGE_EXT_USER_READ)) + +#define PAGE_WRITEONLY __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \ + _PAGE_CACHABLE | _PAGE_FLAGS_HARD | \ + _PAGE_EXT(_PAGE_EXT_KERN_WRITE | \ + _PAGE_EXT_USER_WRITE)) + +#define PAGE_RWX __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | \ + _PAGE_CACHABLE | _PAGE_FLAGS_HARD | \ + _PAGE_EXT(_PAGE_EXT_KERN_WRITE | \ + _PAGE_EXT_KERN_READ | \ + _PAGE_EXT_KERN_EXEC | \ + _PAGE_EXT_USER_WRITE | \ + _PAGE_EXT_USER_READ | \ + _PAGE_EXT_USER_EXEC)) + +#define PAGE_KERNEL __pgprot(_PAGE_PRESENT | _PAGE_CACHABLE | \ + _PAGE_DIRTY | _PAGE_ACCESSED | \ + _PAGE_HW_SHARED | _PAGE_FLAGS_HARD | \ + _PAGE_EXT(_PAGE_EXT_KERN_READ | \ + _PAGE_EXT_KERN_WRITE | \ + _PAGE_EXT_KERN_EXEC)) + +#define PAGE_KERNEL_NOCACHE \ + __pgprot(_PAGE_PRESENT | _PAGE_DIRTY | \ + _PAGE_ACCESSED | _PAGE_HW_SHARED | \ + _PAGE_FLAGS_HARD | \ + _PAGE_EXT(_PAGE_EXT_KERN_READ | \ + _PAGE_EXT_KERN_WRITE | \ + _PAGE_EXT_KERN_EXEC)) + +#define PAGE_KERNEL_RO __pgprot(_PAGE_PRESENT | _PAGE_CACHABLE | \ + _PAGE_DIRTY | _PAGE_ACCESSED | \ + _PAGE_HW_SHARED | _PAGE_FLAGS_HARD | \ + _PAGE_EXT(_PAGE_EXT_KERN_READ | \ + _PAGE_EXT_KERN_EXEC)) + +#define PAGE_KERNEL_PCC(slot, type) \ + __pgprot(_PAGE_PRESENT | _PAGE_DIRTY | \ + _PAGE_ACCESSED | _PAGE_FLAGS_HARD | \ + _PAGE_EXT(_PAGE_EXT_KERN_READ | \ + _PAGE_EXT_KERN_WRITE | \ + _PAGE_EXT_KERN_EXEC) \ + (slot ? _PAGE_PCC_AREA5 : _PAGE_PCC_AREA6) | \ + (type)) + +#elif defined(CONFIG_MMU) /* SH-X TLB */ +#define PAGE_NONE __pgprot(_PAGE_PROTNONE | _PAGE_CACHABLE | \ + _PAGE_ACCESSED | _PAGE_FLAGS_HARD) + +#define PAGE_SHARED __pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_USER | \ + _PAGE_CACHABLE | _PAGE_ACCESSED | \ + _PAGE_FLAGS_HARD) + +#define PAGE_COPY __pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_CACHABLE | \ + _PAGE_ACCESSED | _PAGE_FLAGS_HARD) + +#define PAGE_READONLY __pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_CACHABLE | \ + _PAGE_ACCESSED | _PAGE_FLAGS_HARD) + +#define PAGE_EXECREAD PAGE_READONLY +#define PAGE_RWX PAGE_SHARED +#define PAGE_WRITEONLY PAGE_SHARED + +#define PAGE_KERNEL __pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_CACHABLE | \ + _PAGE_DIRTY | _PAGE_ACCESSED | \ + _PAGE_HW_SHARED | _PAGE_FLAGS_HARD) + +#define PAGE_KERNEL_NOCACHE \ + __pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_DIRTY | \ + _PAGE_ACCESSED | _PAGE_HW_SHARED | \ + _PAGE_FLAGS_HARD) + +#define PAGE_KERNEL_RO __pgprot(_PAGE_PRESENT | _PAGE_CACHABLE | \ + _PAGE_DIRTY | _PAGE_ACCESSED | \ + _PAGE_HW_SHARED | _PAGE_FLAGS_HARD) + +#define PAGE_KERNEL_PCC(slot, type) \ + __pgprot(_PAGE_PRESENT | _PAGE_RW | _PAGE_DIRTY | \ + _PAGE_ACCESSED | _PAGE_FLAGS_HARD | \ + (slot ? _PAGE_PCC_AREA5 : _PAGE_PCC_AREA6) | \ + (type)) +#else /* no mmu */ +#define PAGE_NONE __pgprot(0) +#define PAGE_SHARED __pgprot(0) +#define PAGE_COPY __pgprot(0) +#define PAGE_EXECREAD __pgprot(0) +#define PAGE_RWX __pgprot(0) +#define PAGE_READONLY __pgprot(0) +#define PAGE_WRITEONLY __pgprot(0) +#define PAGE_KERNEL __pgprot(0) +#define PAGE_KERNEL_NOCACHE __pgprot(0) +#define PAGE_KERNEL_RO __pgprot(0) + +#define PAGE_KERNEL_PCC(slot, type) \ + __pgprot(0) +#endif + +#endif /* __ASSEMBLY__ */ + +#ifndef __ASSEMBLY__ + +/* + * Certain architectures need to do special things when PTEs + * within a page table are directly modified. Thus, the following + * hook is made available. + */ +#ifdef CONFIG_X2TLB +static inline void set_pte(pte_t *ptep, pte_t pte) +{ + ptep->pte_high = pte.pte_high; + smp_wmb(); + ptep->pte_low = pte.pte_low; +} +#else +#define set_pte(pteptr, pteval) (*(pteptr) = pteval) +#endif + +#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval) + +/* + * (pmds are folded into pgds so this doesn't get actually called, + * but the define is needed for a generic inline function.) + */ +#define set_pmd(pmdptr, pmdval) (*(pmdptr) = pmdval) + +#define pfn_pte(pfn, prot) \ + __pte(((unsigned long long)(pfn) << PAGE_SHIFT) | pgprot_val(prot)) +#define pfn_pmd(pfn, prot) \ + __pmd(((unsigned long long)(pfn) << PAGE_SHIFT) | pgprot_val(prot)) + +#define pte_none(x) (!pte_val(x)) +#define pte_present(x) ((x).pte_low & (_PAGE_PRESENT | _PAGE_PROTNONE)) + +#define pte_clear(mm,addr,xp) do { set_pte_at(mm, addr, xp, __pte(0)); } while (0) + +#define pmd_none(x) (!pmd_val(x)) +#define pmd_present(x) (pmd_val(x)) +#define pmd_clear(xp) do { set_pmd(xp, __pmd(0)); } while (0) +#define pmd_bad(x) (pmd_val(x) & ~PAGE_MASK) + +#define pages_to_mb(x) ((x) >> (20-PAGE_SHIFT)) +#define pte_page(x) pfn_to_page(pte_pfn(x)) + +/* + * The following only work if pte_present() is true. + * Undefined behaviour if not.. + */ +#define pte_not_present(pte) (!((pte).pte_low & _PAGE_PRESENT)) +#define pte_dirty(pte) ((pte).pte_low & _PAGE_DIRTY) +#define pte_young(pte) ((pte).pte_low & _PAGE_ACCESSED) +#define pte_file(pte) ((pte).pte_low & _PAGE_FILE) +#define pte_special(pte) (0) + +#ifdef CONFIG_X2TLB +#define pte_write(pte) ((pte).pte_high & _PAGE_EXT_USER_WRITE) +#else +#define pte_write(pte) ((pte).pte_low & _PAGE_RW) +#endif + +#define PTE_BIT_FUNC(h,fn,op) \ +static inline pte_t pte_##fn(pte_t pte) { pte.pte_##h op; return pte; } + +#ifdef CONFIG_X2TLB +/* + * We cheat a bit in the SH-X2 TLB case. As the permission bits are + * individually toggled (and user permissions are entirely decoupled from + * kernel permissions), we attempt to couple them a bit more sanely here. + */ +PTE_BIT_FUNC(high, wrprotect, &= ~_PAGE_EXT_USER_WRITE); +PTE_BIT_FUNC(high, mkwrite, |= _PAGE_EXT_USER_WRITE | _PAGE_EXT_KERN_WRITE); +PTE_BIT_FUNC(high, mkhuge, |= _PAGE_SZHUGE); +#else +PTE_BIT_FUNC(low, wrprotect, &= ~_PAGE_RW); +PTE_BIT_FUNC(low, mkwrite, |= _PAGE_RW); +PTE_BIT_FUNC(low, mkhuge, |= _PAGE_SZHUGE); +#endif + +PTE_BIT_FUNC(low, mkclean, &= ~_PAGE_DIRTY); +PTE_BIT_FUNC(low, mkdirty, |= _PAGE_DIRTY); +PTE_BIT_FUNC(low, mkold, &= ~_PAGE_ACCESSED); +PTE_BIT_FUNC(low, mkyoung, |= _PAGE_ACCESSED); + +static inline pte_t pte_mkspecial(pte_t pte) { return pte; } + +/* + * Macro and implementation to make a page protection as uncachable. + */ +#define pgprot_writecombine(prot) \ + __pgprot(pgprot_val(prot) & ~_PAGE_CACHABLE) + +#define pgprot_noncached pgprot_writecombine + +/* + * Conversion functions: convert a page and protection to a page entry, + * and a page entry and page directory to the page they refer to. + * + * extern pte_t mk_pte(struct page *page, pgprot_t pgprot) + */ +#define mk_pte(page, pgprot) pfn_pte(page_to_pfn(page), (pgprot)) + +static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) +{ + pte.pte_low &= _PAGE_CHG_MASK; + pte.pte_low |= pgprot_val(newprot); + +#ifdef CONFIG_X2TLB + pte.pte_high |= pgprot_val(newprot) >> 32; +#endif + + return pte; +} + +#define pmd_page_vaddr(pmd) ((unsigned long)pmd_val(pmd)) +#define pmd_page(pmd) (virt_to_page(pmd_val(pmd))) + +/* to find an entry in a page-table-directory. */ +#define pgd_index(address) (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD-1)) +#define pgd_offset(mm, address) ((mm)->pgd+pgd_index(address)) + +/* to find an entry in a kernel page-table-directory */ +#define pgd_offset_k(address) pgd_offset(&init_mm, address) + +/* Find an entry in the third-level page table.. */ +#define pte_index(address) ((address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1)) +#define pte_offset_kernel(dir, address) \ + ((pte_t *) pmd_page_vaddr(*(dir)) + pte_index(address)) +#define pte_offset_map(dir, address) pte_offset_kernel(dir, address) +#define pte_offset_map_nested(dir, address) pte_offset_kernel(dir, address) + +#define pte_unmap(pte) do { } while (0) +#define pte_unmap_nested(pte) do { } while (0) + +#ifdef CONFIG_X2TLB +#define pte_ERROR(e) \ + printk("%s:%d: bad pte %p(%08lx%08lx).\n", __FILE__, __LINE__, \ + &(e), (e).pte_high, (e).pte_low) +#define pgd_ERROR(e) \ + printk("%s:%d: bad pgd %016llx.\n", __FILE__, __LINE__, pgd_val(e)) +#else +#define pte_ERROR(e) \ + printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e)) +#define pgd_ERROR(e) \ + printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e)) +#endif + +/* + * Encode and de-code a swap entry + * + * Constraints: + * _PAGE_FILE at bit 0 + * _PAGE_PRESENT at bit 8 + * _PAGE_PROTNONE at bit 9 + * + * For the normal case, we encode the swap type into bits 0:7 and the + * swap offset into bits 10:30. For the 64-bit PTE case, we keep the + * preserved bits in the low 32-bits and use the upper 32 as the swap + * offset (along with a 5-bit type), following the same approach as x86 + * PAE. This keeps the logic quite simple, and allows for a full 32 + * PTE_FILE_MAX_BITS, as opposed to the 29-bits we're constrained with + * in the pte_low case. + * + * As is evident by the Alpha code, if we ever get a 64-bit unsigned + * long (swp_entry_t) to match up with the 64-bit PTEs, this all becomes + * much cleaner.. + * + * NOTE: We should set ZEROs at the position of _PAGE_PRESENT + * and _PAGE_PROTNONE bits + */ +#ifdef CONFIG_X2TLB +#define __swp_type(x) ((x).val & 0x1f) +#define __swp_offset(x) ((x).val >> 5) +#define __swp_entry(type, offset) ((swp_entry_t){ (type) | (offset) << 5}) +#define __pte_to_swp_entry(pte) ((swp_entry_t){ (pte).pte_high }) +#define __swp_entry_to_pte(x) ((pte_t){ 0, (x).val }) + +/* + * Encode and decode a nonlinear file mapping entry + */ +#define pte_to_pgoff(pte) ((pte).pte_high) +#define pgoff_to_pte(off) ((pte_t) { _PAGE_FILE, (off) }) + +#define PTE_FILE_MAX_BITS 32 +#else +#define __swp_type(x) ((x).val & 0xff) +#define __swp_offset(x) ((x).val >> 10) +#define __swp_entry(type, offset) ((swp_entry_t){(type) | (offset) <<10}) + +#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) >> 1 }) +#define __swp_entry_to_pte(x) ((pte_t) { (x).val << 1 }) + +/* + * Encode and decode a nonlinear file mapping entry + */ +#define PTE_FILE_MAX_BITS 29 +#define pte_to_pgoff(pte) (pte_val(pte) >> 1) +#define pgoff_to_pte(off) ((pte_t) { ((off) << 1) | _PAGE_FILE }) +#endif + +#endif /* __ASSEMBLY__ */ +#endif /* __ASM_SH_PGTABLE_32_H */ diff --git a/arch/sh/include/asm/pgtable_64.h b/arch/sh/include/asm/pgtable_64.h new file mode 100644 index 000000000000..c78990cda557 --- /dev/null +++ b/arch/sh/include/asm/pgtable_64.h @@ -0,0 +1,314 @@ +#ifndef __ASM_SH_PGTABLE_64_H +#define __ASM_SH_PGTABLE_64_H + +/* + * include/asm-sh/pgtable_64.h + * + * This file contains the functions and defines necessary to modify and use + * the SuperH page table tree. + * + * Copyright (C) 2000, 2001 Paolo Alberelli + * Copyright (C) 2003, 2004 Paul Mundt + * Copyright (C) 2003, 2004 Richard Curnow + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/threads.h> +#include <asm/processor.h> +#include <asm/page.h> + +/* + * Error outputs. + */ +#define pte_ERROR(e) \ + printk("%s:%d: bad pte %016Lx.\n", __FILE__, __LINE__, pte_val(e)) +#define pgd_ERROR(e) \ + printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e)) + +/* + * Table setting routines. Used within arch/mm only. + */ +#define set_pmd(pmdptr, pmdval) (*(pmdptr) = pmdval) + +static __inline__ void set_pte(pte_t *pteptr, pte_t pteval) +{ + unsigned long long x = ((unsigned long long) pteval.pte_low); + unsigned long long *xp = (unsigned long long *) pteptr; + /* + * Sign-extend based on NPHYS. + */ + *(xp) = (x & NPHYS_SIGN) ? (x | NPHYS_MASK) : x; +} +#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval) + +static __inline__ void pmd_set(pmd_t *pmdp,pte_t *ptep) +{ + pmd_val(*pmdp) = (unsigned long) ptep; +} + +/* + * PGD defines. Top level. + */ + +/* To find an entry in a generic PGD. */ +#define pgd_index(address) (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD-1)) +#define __pgd_offset(address) pgd_index(address) +#define pgd_offset(mm, address) ((mm)->pgd+pgd_index(address)) + +/* To find an entry in a kernel PGD. */ +#define pgd_offset_k(address) pgd_offset(&init_mm, address) + +/* + * PMD level access routines. Same notes as above. + */ +#define _PMD_EMPTY 0x0 +/* Either the PMD is empty or present, it's not paged out */ +#define pmd_present(pmd_entry) (pmd_val(pmd_entry) & _PAGE_PRESENT) +#define pmd_clear(pmd_entry_p) (set_pmd((pmd_entry_p), __pmd(_PMD_EMPTY))) +#define pmd_none(pmd_entry) (pmd_val((pmd_entry)) == _PMD_EMPTY) +#define pmd_bad(pmd_entry) ((pmd_val(pmd_entry) & (~PAGE_MASK & ~_PAGE_USER)) != _KERNPG_TABLE) + +#define pmd_page_vaddr(pmd_entry) \ + ((unsigned long) __va(pmd_val(pmd_entry) & PAGE_MASK)) + +#define pmd_page(pmd) \ + (virt_to_page(pmd_val(pmd))) + +/* PMD to PTE dereferencing */ +#define pte_index(address) \ + ((address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1)) + +#define pte_offset_kernel(dir, addr) \ + ((pte_t *) ((pmd_val(*(dir))) & PAGE_MASK) + pte_index((addr))) + +#define pte_offset_map(dir,addr) pte_offset_kernel(dir, addr) +#define pte_offset_map_nested(dir,addr) pte_offset_kernel(dir, addr) +#define pte_unmap(pte) do { } while (0) +#define pte_unmap_nested(pte) do { } while (0) + +#ifndef __ASSEMBLY__ +#define IOBASE_VADDR 0xff000000 +#define IOBASE_END 0xffffffff + +/* + * PTEL coherent flags. + * See Chapter 17 ST50 CPU Core Volume 1, Architecture. + */ +/* The bits that are required in the SH-5 TLB are placed in the h/w-defined + positions, to avoid expensive bit shuffling on every refill. The remaining + bits are used for s/w purposes and masked out on each refill. + + Note, the PTE slots are used to hold data of type swp_entry_t when a page is + swapped out. Only the _PAGE_PRESENT flag is significant when the page is + swapped out, and it must be placed so that it doesn't overlap either the + type or offset fields of swp_entry_t. For x86, offset is at [31:8] and type + at [6:1], with _PAGE_PRESENT at bit 0 for both pte_t and swp_entry_t. This + scheme doesn't map to SH-5 because bit [0] controls cacheability. So bit + [2] is used for _PAGE_PRESENT and the type field of swp_entry_t is split + into 2 pieces. That is handled by SWP_ENTRY and SWP_TYPE below. */ +#define _PAGE_WT 0x001 /* CB0: if cacheable, 1->write-thru, 0->write-back */ +#define _PAGE_DEVICE 0x001 /* CB0: if uncacheable, 1->device (i.e. no write-combining or reordering at bus level) */ +#define _PAGE_CACHABLE 0x002 /* CB1: uncachable/cachable */ +#define _PAGE_PRESENT 0x004 /* software: page referenced */ +#define _PAGE_FILE 0x004 /* software: only when !present */ +#define _PAGE_SIZE0 0x008 /* SZ0-bit : size of page */ +#define _PAGE_SIZE1 0x010 /* SZ1-bit : size of page */ +#define _PAGE_SHARED 0x020 /* software: reflects PTEH's SH */ +#define _PAGE_READ 0x040 /* PR0-bit : read access allowed */ +#define _PAGE_EXECUTE 0x080 /* PR1-bit : execute access allowed */ +#define _PAGE_WRITE 0x100 /* PR2-bit : write access allowed */ +#define _PAGE_USER 0x200 /* PR3-bit : user space access allowed */ +#define _PAGE_DIRTY 0x400 /* software: page accessed in write */ +#define _PAGE_ACCESSED 0x800 /* software: page referenced */ + +/* Mask which drops software flags */ +#define _PAGE_FLAGS_HARDWARE_MASK 0xfffffffffffff3dbLL + +/* + * HugeTLB support + */ +#if defined(CONFIG_HUGETLB_PAGE_SIZE_64K) +#define _PAGE_SZHUGE (_PAGE_SIZE0) +#elif defined(CONFIG_HUGETLB_PAGE_SIZE_1MB) +#define _PAGE_SZHUGE (_PAGE_SIZE1) +#elif defined(CONFIG_HUGETLB_PAGE_SIZE_512MB) +#define _PAGE_SZHUGE (_PAGE_SIZE0 | _PAGE_SIZE1) +#endif + +/* + * Stub out _PAGE_SZHUGE if we don't have a good definition for it, + * to make pte_mkhuge() happy. + */ +#ifndef _PAGE_SZHUGE +# define _PAGE_SZHUGE (0) +#endif + +/* + * Default flags for a Kernel page. + * This is fundametally also SHARED because the main use of this define + * (other than for PGD/PMD entries) is for the VMALLOC pool which is + * contextless. + * + * _PAGE_EXECUTE is required for modules + * + */ +#define _KERNPG_TABLE (_PAGE_PRESENT | _PAGE_READ | _PAGE_WRITE | \ + _PAGE_EXECUTE | \ + _PAGE_CACHABLE | _PAGE_ACCESSED | _PAGE_DIRTY | \ + _PAGE_SHARED) + +/* Default flags for a User page */ +#define _PAGE_TABLE (_KERNPG_TABLE | _PAGE_USER) + +#define _PAGE_CHG_MASK (PTE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY) + +/* + * We have full permissions (Read/Write/Execute/Shared). + */ +#define _PAGE_COMMON (_PAGE_PRESENT | _PAGE_USER | \ + _PAGE_CACHABLE | _PAGE_ACCESSED) + +#define PAGE_NONE __pgprot(_PAGE_CACHABLE | _PAGE_ACCESSED) +#define PAGE_SHARED __pgprot(_PAGE_COMMON | _PAGE_READ | _PAGE_WRITE | \ + _PAGE_SHARED) +#define PAGE_EXECREAD __pgprot(_PAGE_COMMON | _PAGE_READ | _PAGE_EXECUTE) + +/* + * We need to include PAGE_EXECUTE in PAGE_COPY because it is the default + * protection mode for the stack. + */ +#define PAGE_COPY PAGE_EXECREAD + +#define PAGE_READONLY __pgprot(_PAGE_COMMON | _PAGE_READ) +#define PAGE_WRITEONLY __pgprot(_PAGE_COMMON | _PAGE_WRITE) +#define PAGE_RWX __pgprot(_PAGE_COMMON | _PAGE_READ | \ + _PAGE_WRITE | _PAGE_EXECUTE) +#define PAGE_KERNEL __pgprot(_KERNPG_TABLE) + +#define PAGE_KERNEL_NOCACHE \ + __pgprot(_PAGE_PRESENT | _PAGE_READ | _PAGE_WRITE | \ + _PAGE_EXECUTE | _PAGE_ACCESSED | \ + _PAGE_DIRTY | _PAGE_SHARED) + +/* Make it a device mapping for maximum safety (e.g. for mapping device + registers into user-space via /dev/map). */ +#define pgprot_noncached(x) __pgprot(((x).pgprot & ~(_PAGE_CACHABLE)) | _PAGE_DEVICE) +#define pgprot_writecombine(prot) __pgprot(pgprot_val(prot) & ~_PAGE_CACHABLE) + +/* + * Handling allocation failures during page table setup. + */ +extern void __handle_bad_pmd_kernel(pmd_t * pmd); +#define __handle_bad_pmd(x) __handle_bad_pmd_kernel(x) + +/* + * PTE level access routines. + * + * Note1: + * It's the tree walk leaf. This is physical address to be stored. + * + * Note 2: + * Regarding the choice of _PTE_EMPTY: + + We must choose a bit pattern that cannot be valid, whether or not the page + is present. bit[2]==1 => present, bit[2]==0 => swapped out. If swapped + out, bits [31:8], [6:3], [1:0] are under swapper control, so only bit[7] is + left for us to select. If we force bit[7]==0 when swapped out, we could use + the combination bit[7,2]=2'b10 to indicate an empty PTE. Alternatively, if + we force bit[7]==1 when swapped out, we can use all zeroes to indicate + empty. This is convenient, because the page tables get cleared to zero + when they are allocated. + + */ +#define _PTE_EMPTY 0x0 +#define pte_present(x) (pte_val(x) & _PAGE_PRESENT) +#define pte_clear(mm,addr,xp) (set_pte_at(mm, addr, xp, __pte(_PTE_EMPTY))) +#define pte_none(x) (pte_val(x) == _PTE_EMPTY) + +/* + * Some definitions to translate between mem_map, PTEs, and page + * addresses: + */ + +/* + * Given a PTE, return the index of the mem_map[] entry corresponding + * to the page frame the PTE. Get the absolute physical address, make + * a relative physical address and translate it to an index. + */ +#define pte_pagenr(x) (((unsigned long) (pte_val(x)) - \ + __MEMORY_START) >> PAGE_SHIFT) + +/* + * Given a PTE, return the "struct page *". + */ +#define pte_page(x) (mem_map + pte_pagenr(x)) + +/* + * Return number of (down rounded) MB corresponding to x pages. + */ +#define pages_to_mb(x) ((x) >> (20-PAGE_SHIFT)) + + +/* + * The following have defined behavior only work if pte_present() is true. + */ +static inline int pte_dirty(pte_t pte) { return pte_val(pte) & _PAGE_DIRTY; } +static inline int pte_young(pte_t pte) { return pte_val(pte) & _PAGE_ACCESSED; } +static inline int pte_file(pte_t pte) { return pte_val(pte) & _PAGE_FILE; } +static inline int pte_write(pte_t pte) { return pte_val(pte) & _PAGE_WRITE; } +static inline int pte_special(pte_t pte){ return 0; } + +static inline pte_t pte_wrprotect(pte_t pte) { set_pte(&pte, __pte(pte_val(pte) & ~_PAGE_WRITE)); return pte; } +static inline pte_t pte_mkclean(pte_t pte) { set_pte(&pte, __pte(pte_val(pte) & ~_PAGE_DIRTY)); return pte; } +static inline pte_t pte_mkold(pte_t pte) { set_pte(&pte, __pte(pte_val(pte) & ~_PAGE_ACCESSED)); return pte; } +static inline pte_t pte_mkwrite(pte_t pte) { set_pte(&pte, __pte(pte_val(pte) | _PAGE_WRITE)); return pte; } +static inline pte_t pte_mkdirty(pte_t pte) { set_pte(&pte, __pte(pte_val(pte) | _PAGE_DIRTY)); return pte; } +static inline pte_t pte_mkyoung(pte_t pte) { set_pte(&pte, __pte(pte_val(pte) | _PAGE_ACCESSED)); return pte; } +static inline pte_t pte_mkhuge(pte_t pte) { set_pte(&pte, __pte(pte_val(pte) | _PAGE_SZHUGE)); return pte; } +static inline pte_t pte_mkspecial(pte_t pte) { return pte; } + + +/* + * Conversion functions: convert a page and protection to a page entry. + * + * extern pte_t mk_pte(struct page *page, pgprot_t pgprot) + */ +#define mk_pte(page,pgprot) \ +({ \ + pte_t __pte; \ + \ + set_pte(&__pte, __pte((((page)-mem_map) << PAGE_SHIFT) | \ + __MEMORY_START | pgprot_val((pgprot)))); \ + __pte; \ +}) + +/* + * This takes a (absolute) physical page address that is used + * by the remapping functions + */ +#define mk_pte_phys(physpage, pgprot) \ +({ pte_t __pte; set_pte(&__pte, __pte(physpage | pgprot_val(pgprot))); __pte; }) + +static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) +{ set_pte(&pte, __pte((pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot))); return pte; } + +/* Encode and decode a swap entry */ +#define __swp_type(x) (((x).val & 3) + (((x).val >> 1) & 0x3c)) +#define __swp_offset(x) ((x).val >> 8) +#define __swp_entry(type, offset) ((swp_entry_t) { ((offset << 8) + ((type & 0x3c) << 1) + (type & 3)) }) +#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) }) +#define __swp_entry_to_pte(x) ((pte_t) { (x).val }) + +/* Encode and decode a nonlinear file mapping entry */ +#define PTE_FILE_MAX_BITS 29 +#define pte_to_pgoff(pte) (pte_val(pte)) +#define pgoff_to_pte(off) ((pte_t) { (off) | _PAGE_FILE }) + +#endif /* !__ASSEMBLY__ */ + +#define pfn_pte(pfn, prot) __pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot)) +#define pfn_pmd(pfn, prot) __pmd(((pfn) << PAGE_SHIFT) | pgprot_val(prot)) + +#endif /* __ASM_SH_PGTABLE_64_H */ diff --git a/arch/sh/include/asm/pm.h b/arch/sh/include/asm/pm.h new file mode 100644 index 000000000000..56fdbd6b1c94 --- /dev/null +++ b/arch/sh/include/asm/pm.h @@ -0,0 +1,17 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright 2006 (c) Andriy Skulysh <askulysh@gmail.com> + * + */ +#ifndef __ASM_SH_PM_H +#define __ASM_SH_PM_H + +extern u8 wakeup_start; +extern u8 wakeup_end; + +void pm_enter(void); + +#endif diff --git a/arch/sh/include/asm/poll.h b/arch/sh/include/asm/poll.h new file mode 100644 index 000000000000..c98509d3149e --- /dev/null +++ b/arch/sh/include/asm/poll.h @@ -0,0 +1 @@ +#include <asm-generic/poll.h> diff --git a/arch/sh/include/asm/posix_types.h b/arch/sh/include/asm/posix_types.h new file mode 100644 index 000000000000..4eeb723aee7e --- /dev/null +++ b/arch/sh/include/asm/posix_types.h @@ -0,0 +1,13 @@ +#ifdef __KERNEL__ +# ifdef CONFIG_SUPERH32 +# include "posix_types_32.h" +# else +# include "posix_types_64.h" +# endif +#else +# ifdef __SH5__ +# include "posix_types_64.h" +# else +# include "posix_types_32.h" +# endif +#endif /* __KERNEL__ */ diff --git a/arch/sh/include/asm/posix_types_32.h b/arch/sh/include/asm/posix_types_32.h new file mode 100644 index 000000000000..0a3d2f54ab27 --- /dev/null +++ b/arch/sh/include/asm/posix_types_32.h @@ -0,0 +1,122 @@ +#ifndef __ASM_SH_POSIX_TYPES_H +#define __ASM_SH_POSIX_TYPES_H + +/* + * This file is generally used by user-level software, so you need to + * be a little careful about namespace pollution etc. Also, we cannot + * assume GCC is being used. + */ + +typedef unsigned long __kernel_ino_t; +typedef unsigned short __kernel_mode_t; +typedef unsigned short __kernel_nlink_t; +typedef long __kernel_off_t; +typedef int __kernel_pid_t; +typedef unsigned short __kernel_ipc_pid_t; +typedef unsigned short __kernel_uid_t; +typedef unsigned short __kernel_gid_t; +typedef unsigned int __kernel_size_t; +typedef int __kernel_ssize_t; +typedef int __kernel_ptrdiff_t; +typedef long __kernel_time_t; +typedef long __kernel_suseconds_t; +typedef long __kernel_clock_t; +typedef int __kernel_timer_t; +typedef int __kernel_clockid_t; +typedef int __kernel_daddr_t; +typedef char * __kernel_caddr_t; +typedef unsigned short __kernel_uid16_t; +typedef unsigned short __kernel_gid16_t; +typedef unsigned int __kernel_uid32_t; +typedef unsigned int __kernel_gid32_t; + +typedef unsigned short __kernel_old_uid_t; +typedef unsigned short __kernel_old_gid_t; +typedef unsigned short __kernel_old_dev_t; + +#ifdef __GNUC__ +typedef long long __kernel_loff_t; +#endif + +typedef struct { +#if defined(__KERNEL__) || defined(__USE_ALL) + int val[2]; +#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */ + int __val[2]; +#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */ +} __kernel_fsid_t; + +#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) + +#undef __FD_SET +static __inline__ void __FD_SET(unsigned long __fd, __kernel_fd_set *__fdsetp) +{ + unsigned long __tmp = __fd / __NFDBITS; + unsigned long __rem = __fd % __NFDBITS; + __fdsetp->fds_bits[__tmp] |= (1UL<<__rem); +} + +#undef __FD_CLR +static __inline__ void __FD_CLR(unsigned long __fd, __kernel_fd_set *__fdsetp) +{ + unsigned long __tmp = __fd / __NFDBITS; + unsigned long __rem = __fd % __NFDBITS; + __fdsetp->fds_bits[__tmp] &= ~(1UL<<__rem); +} + + +#undef __FD_ISSET +static __inline__ int __FD_ISSET(unsigned long __fd, const __kernel_fd_set *__p) +{ + unsigned long __tmp = __fd / __NFDBITS; + unsigned long __rem = __fd % __NFDBITS; + return (__p->fds_bits[__tmp] & (1UL<<__rem)) != 0; +} + +/* + * This will unroll the loop for the normal constant case (8 ints, + * for a 256-bit fd_set) + */ +#undef __FD_ZERO +static __inline__ void __FD_ZERO(__kernel_fd_set *__p) +{ + unsigned long *__tmp = __p->fds_bits; + int __i; + + if (__builtin_constant_p(__FDSET_LONGS)) { + switch (__FDSET_LONGS) { + case 16: + __tmp[ 0] = 0; __tmp[ 1] = 0; + __tmp[ 2] = 0; __tmp[ 3] = 0; + __tmp[ 4] = 0; __tmp[ 5] = 0; + __tmp[ 6] = 0; __tmp[ 7] = 0; + __tmp[ 8] = 0; __tmp[ 9] = 0; + __tmp[10] = 0; __tmp[11] = 0; + __tmp[12] = 0; __tmp[13] = 0; + __tmp[14] = 0; __tmp[15] = 0; + return; + + case 8: + __tmp[ 0] = 0; __tmp[ 1] = 0; + __tmp[ 2] = 0; __tmp[ 3] = 0; + __tmp[ 4] = 0; __tmp[ 5] = 0; + __tmp[ 6] = 0; __tmp[ 7] = 0; + return; + + case 4: + __tmp[ 0] = 0; __tmp[ 1] = 0; + __tmp[ 2] = 0; __tmp[ 3] = 0; + return; + } + } + __i = __FDSET_LONGS; + while (__i) { + __i--; + *__tmp = 0; + __tmp++; + } +} + +#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */ + +#endif /* __ASM_SH_POSIX_TYPES_H */ diff --git a/arch/sh/include/asm/posix_types_64.h b/arch/sh/include/asm/posix_types_64.h new file mode 100644 index 000000000000..0620317a6f0f --- /dev/null +++ b/arch/sh/include/asm/posix_types_64.h @@ -0,0 +1,131 @@ +#ifndef __ASM_SH64_POSIX_TYPES_H +#define __ASM_SH64_POSIX_TYPES_H + +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * include/asm-sh64/posix_types.h + * + * Copyright (C) 2000, 2001 Paolo Alberelli + * Copyright (C) 2003 Paul Mundt + * + * This file is generally used by user-level software, so you need to + * be a little careful about namespace pollution etc. Also, we cannot + * assume GCC is being used. + */ + +typedef unsigned long __kernel_ino_t; +typedef unsigned short __kernel_mode_t; +typedef unsigned short __kernel_nlink_t; +typedef long __kernel_off_t; +typedef int __kernel_pid_t; +typedef unsigned short __kernel_ipc_pid_t; +typedef unsigned short __kernel_uid_t; +typedef unsigned short __kernel_gid_t; +typedef long unsigned int __kernel_size_t; +typedef int __kernel_ssize_t; +typedef int __kernel_ptrdiff_t; +typedef long __kernel_time_t; +typedef long __kernel_suseconds_t; +typedef long __kernel_clock_t; +typedef int __kernel_timer_t; +typedef int __kernel_clockid_t; +typedef int __kernel_daddr_t; +typedef char * __kernel_caddr_t; +typedef unsigned short __kernel_uid16_t; +typedef unsigned short __kernel_gid16_t; +typedef unsigned int __kernel_uid32_t; +typedef unsigned int __kernel_gid32_t; + +typedef unsigned short __kernel_old_uid_t; +typedef unsigned short __kernel_old_gid_t; +typedef unsigned short __kernel_old_dev_t; + +#ifdef __GNUC__ +typedef long long __kernel_loff_t; +#endif + +typedef struct { +#if defined(__KERNEL__) || defined(__USE_ALL) + int val[2]; +#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */ + int __val[2]; +#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */ +} __kernel_fsid_t; + +#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) + +#undef __FD_SET +static __inline__ void __FD_SET(unsigned long __fd, __kernel_fd_set *__fdsetp) +{ + unsigned long __tmp = __fd / __NFDBITS; + unsigned long __rem = __fd % __NFDBITS; + __fdsetp->fds_bits[__tmp] |= (1UL<<__rem); +} + +#undef __FD_CLR +static __inline__ void __FD_CLR(unsigned long __fd, __kernel_fd_set *__fdsetp) +{ + unsigned long __tmp = __fd / __NFDBITS; + unsigned long __rem = __fd % __NFDBITS; + __fdsetp->fds_bits[__tmp] &= ~(1UL<<__rem); +} + + +#undef __FD_ISSET +static __inline__ int __FD_ISSET(unsigned long __fd, const __kernel_fd_set *__p) +{ + unsigned long __tmp = __fd / __NFDBITS; + unsigned long __rem = __fd % __NFDBITS; + return (__p->fds_bits[__tmp] & (1UL<<__rem)) != 0; +} + +/* + * This will unroll the loop for the normal constant case (8 ints, + * for a 256-bit fd_set) + */ +#undef __FD_ZERO +static __inline__ void __FD_ZERO(__kernel_fd_set *__p) +{ + unsigned long *__tmp = __p->fds_bits; + int __i; + + if (__builtin_constant_p(__FDSET_LONGS)) { + switch (__FDSET_LONGS) { + case 16: + __tmp[ 0] = 0; __tmp[ 1] = 0; + __tmp[ 2] = 0; __tmp[ 3] = 0; + __tmp[ 4] = 0; __tmp[ 5] = 0; + __tmp[ 6] = 0; __tmp[ 7] = 0; + __tmp[ 8] = 0; __tmp[ 9] = 0; + __tmp[10] = 0; __tmp[11] = 0; + __tmp[12] = 0; __tmp[13] = 0; + __tmp[14] = 0; __tmp[15] = 0; + return; + + case 8: + __tmp[ 0] = 0; __tmp[ 1] = 0; + __tmp[ 2] = 0; __tmp[ 3] = 0; + __tmp[ 4] = 0; __tmp[ 5] = 0; + __tmp[ 6] = 0; __tmp[ 7] = 0; + return; + + case 4: + __tmp[ 0] = 0; __tmp[ 1] = 0; + __tmp[ 2] = 0; __tmp[ 3] = 0; + return; + } + } + __i = __FDSET_LONGS; + while (__i) { + __i--; + *__tmp = 0; + __tmp++; + } +} + +#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */ + +#endif /* __ASM_SH64_POSIX_TYPES_H */ diff --git a/arch/sh/include/asm/processor.h b/arch/sh/include/asm/processor.h new file mode 100644 index 000000000000..15d9f92ca383 --- /dev/null +++ b/arch/sh/include/asm/processor.h @@ -0,0 +1,66 @@ +#ifndef __ASM_SH_PROCESSOR_H +#define __ASM_SH_PROCESSOR_H + +#include <asm/cpu-features.h> +#include <asm/segment.h> + +#ifndef __ASSEMBLY__ +/* + * CPU type and hardware bug flags. Kept separately for each CPU. + * + * Each one of these also needs a CONFIG_CPU_SUBTYPE_xxx entry + * in arch/sh/mm/Kconfig, as well as an entry in arch/sh/kernel/setup.c + * for parsing the subtype in get_cpu_subtype(). + */ +enum cpu_type { + /* SH-2 types */ + CPU_SH7619, + + /* SH-2A types */ + CPU_SH7203, CPU_SH7206, CPU_SH7263, CPU_MXG, + + /* SH-3 types */ + CPU_SH7705, CPU_SH7706, CPU_SH7707, + CPU_SH7708, CPU_SH7708S, CPU_SH7708R, + CPU_SH7709, CPU_SH7709A, CPU_SH7710, CPU_SH7712, + CPU_SH7720, CPU_SH7721, CPU_SH7729, + + /* SH-4 types */ + CPU_SH7750, CPU_SH7750S, CPU_SH7750R, CPU_SH7751, CPU_SH7751R, + CPU_SH7760, CPU_SH4_202, CPU_SH4_501, + + /* SH-4A types */ + CPU_SH7763, CPU_SH7770, CPU_SH7780, CPU_SH7781, CPU_SH7785, + CPU_SH7723, CPU_SHX3, + + /* SH4AL-DSP types */ + CPU_SH7343, CPU_SH7722, CPU_SH7366, + + /* SH-5 types */ + CPU_SH5_101, CPU_SH5_103, + + /* Unknown subtype */ + CPU_SH_NONE +}; + +/* Forward decl */ +struct sh_cpuinfo; + +/* arch/sh/kernel/setup.c */ +const char *get_cpu_subtype(struct sh_cpuinfo *c); + +#ifdef CONFIG_VSYSCALL +int vsyscall_init(void); +#else +#define vsyscall_init() do { } while (0) +#endif + +#endif /* __ASSEMBLY__ */ + +#ifdef CONFIG_SUPERH32 +# include "processor_32.h" +#else +# include "processor_64.h" +#endif + +#endif /* __ASM_SH_PROCESSOR_H */ diff --git a/arch/sh/include/asm/processor_32.h b/arch/sh/include/asm/processor_32.h new file mode 100644 index 000000000000..0dadd75bd93c --- /dev/null +++ b/arch/sh/include/asm/processor_32.h @@ -0,0 +1,216 @@ +/* + * include/asm-sh/processor.h + * + * Copyright (C) 1999, 2000 Niibe Yutaka + * Copyright (C) 2002, 2003 Paul Mundt + */ + +#ifndef __ASM_SH_PROCESSOR_32_H +#define __ASM_SH_PROCESSOR_32_H +#ifdef __KERNEL__ + +#include <linux/compiler.h> +#include <asm/page.h> +#include <asm/types.h> +#include <asm/cache.h> +#include <asm/ptrace.h> + +/* + * Default implementation of macro that returns current + * instruction pointer ("program counter"). + */ +#define current_text_addr() ({ void *pc; __asm__("mova 1f, %0\n.align 2\n1:":"=z" (pc)); pc; }) + +/* Core Processor Version Register */ +#define CCN_PVR 0xff000030 +#define CCN_CVR 0xff000040 +#define CCN_PRR 0xff000044 + +struct sh_cpuinfo { + unsigned int type; + int cut_major, cut_minor; + unsigned long loops_per_jiffy; + unsigned long asid_cache; + + struct cache_info icache; /* Primary I-cache */ + struct cache_info dcache; /* Primary D-cache */ + struct cache_info scache; /* Secondary cache */ + + unsigned long flags; +} __attribute__ ((aligned(L1_CACHE_BYTES))); + +extern struct sh_cpuinfo cpu_data[]; +#define boot_cpu_data cpu_data[0] +#define current_cpu_data cpu_data[smp_processor_id()] +#define raw_current_cpu_data cpu_data[raw_smp_processor_id()] + +/* + * User space process size: 2GB. + * + * Since SH7709 and SH7750 have "area 7", we can't use 0x7c000000--0x7fffffff + */ +#define TASK_SIZE 0x7c000000UL + +#define STACK_TOP TASK_SIZE +#define STACK_TOP_MAX STACK_TOP + +/* This decides where the kernel will search for a free chunk of vm + * space during mmap's. + */ +#define TASK_UNMAPPED_BASE (TASK_SIZE / 3) + +/* + * Bit of SR register + * + * FD-bit: + * When it's set, it means the processor doesn't have right to use FPU, + * and it results exception when the floating operation is executed. + * + * IMASK-bit: + * Interrupt level mask + */ +#define SR_DSP 0x00001000 +#define SR_IMASK 0x000000f0 +#define SR_FD 0x00008000 + +/* + * FPU structure and data + */ + +struct sh_fpu_hard_struct { + unsigned long fp_regs[16]; + unsigned long xfp_regs[16]; + unsigned long fpscr; + unsigned long fpul; + + long status; /* software status information */ +}; + +/* Dummy fpu emulator */ +struct sh_fpu_soft_struct { + unsigned long fp_regs[16]; + unsigned long xfp_regs[16]; + unsigned long fpscr; + unsigned long fpul; + + unsigned char lookahead; + unsigned long entry_pc; +}; + +union sh_fpu_union { + struct sh_fpu_hard_struct hard; + struct sh_fpu_soft_struct soft; +}; + +struct thread_struct { + /* Saved registers when thread is descheduled */ + unsigned long sp; + unsigned long pc; + + /* Hardware debugging registers */ + unsigned long ubc_pc; + + /* floating point info */ + union sh_fpu_union fpu; +}; + +/* Count of active tasks with UBC settings */ +extern int ubc_usercnt; + +#define INIT_THREAD { \ + .sp = sizeof(init_stack) + (long) &init_stack, \ +} + +/* + * Do necessary setup to start up a newly executed thread. + */ +#define start_thread(regs, new_pc, new_sp) \ + set_fs(USER_DS); \ + regs->pr = 0; \ + regs->sr = SR_FD; /* User mode. */ \ + regs->pc = new_pc; \ + regs->regs[15] = new_sp + +/* Forward declaration, a strange C thing */ +struct task_struct; +struct mm_struct; + +/* Free all resources held by a thread. */ +extern void release_thread(struct task_struct *); + +/* Prepare to copy thread state - unlazy all lazy status */ +#define prepare_to_copy(tsk) do { } while (0) + +/* + * create a kernel thread without removing it from tasklists + */ +extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags); + +/* Copy and release all segment info associated with a VM */ +#define copy_segments(p, mm) do { } while(0) +#define release_segments(mm) do { } while(0) + +/* + * FPU lazy state save handling. + */ + +static __inline__ void disable_fpu(void) +{ + unsigned long __dummy; + + /* Set FD flag in SR */ + __asm__ __volatile__("stc sr, %0\n\t" + "or %1, %0\n\t" + "ldc %0, sr" + : "=&r" (__dummy) + : "r" (SR_FD)); +} + +static __inline__ void enable_fpu(void) +{ + unsigned long __dummy; + + /* Clear out FD flag in SR */ + __asm__ __volatile__("stc sr, %0\n\t" + "and %1, %0\n\t" + "ldc %0, sr" + : "=&r" (__dummy) + : "r" (~SR_FD)); +} + +/* Double presision, NANS as NANS, rounding to nearest, no exceptions */ +#define FPSCR_INIT 0x00080000 + +#define FPSCR_CAUSE_MASK 0x0001f000 /* Cause bits */ +#define FPSCR_FLAG_MASK 0x0000007c /* Flag bits */ + +/* + * Return saved PC of a blocked thread. + */ +#define thread_saved_pc(tsk) (tsk->thread.pc) + +void show_trace(struct task_struct *tsk, unsigned long *sp, + struct pt_regs *regs); +extern unsigned long get_wchan(struct task_struct *p); + +#define KSTK_EIP(tsk) (task_pt_regs(tsk)->pc) +#define KSTK_ESP(tsk) (task_pt_regs(tsk)->regs[15]) + +#define cpu_sleep() __asm__ __volatile__ ("sleep" : : : "memory") +#define cpu_relax() barrier() + +#if defined(CONFIG_CPU_SH2A) || defined(CONFIG_CPU_SH3) || \ + defined(CONFIG_CPU_SH4) +#define PREFETCH_STRIDE L1_CACHE_BYTES +#define ARCH_HAS_PREFETCH +#define ARCH_HAS_PREFETCHW +static inline void prefetch(void *x) +{ + __asm__ __volatile__ ("pref @%0\n\t" : : "r" (x) : "memory"); +} + +#define prefetchw(x) prefetch(x) +#endif + +#endif /* __KERNEL__ */ +#endif /* __ASM_SH_PROCESSOR_32_H */ diff --git a/arch/sh/include/asm/processor_64.h b/arch/sh/include/asm/processor_64.h new file mode 100644 index 000000000000..770d5169983b --- /dev/null +++ b/arch/sh/include/asm/processor_64.h @@ -0,0 +1,275 @@ +#ifndef __ASM_SH_PROCESSOR_64_H +#define __ASM_SH_PROCESSOR_64_H + +/* + * include/asm-sh/processor_64.h + * + * Copyright (C) 2000, 2001 Paolo Alberelli + * Copyright (C) 2003 Paul Mundt + * Copyright (C) 2004 Richard Curnow + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASSEMBLY__ + +#include <linux/compiler.h> +#include <asm/page.h> +#include <asm/types.h> +#include <asm/cache.h> +#include <asm/ptrace.h> +#include <cpu/registers.h> + +/* + * Default implementation of macro that returns current + * instruction pointer ("program counter"). + */ +#define current_text_addr() ({ \ +void *pc; \ +unsigned long long __dummy = 0; \ +__asm__("gettr tr0, %1\n\t" \ + "pta 4, tr0\n\t" \ + "gettr tr0, %0\n\t" \ + "ptabs %1, tr0\n\t" \ + :"=r" (pc), "=r" (__dummy) \ + : "1" (__dummy)); \ +pc; }) + +/* + * TLB information structure + * + * Defined for both I and D tlb, per-processor. + */ +struct tlb_info { + unsigned long long next; + unsigned long long first; + unsigned long long last; + + unsigned int entries; + unsigned int step; + + unsigned long flags; +}; + +struct sh_cpuinfo { + enum cpu_type type; + unsigned long loops_per_jiffy; + unsigned long asid_cache; + + unsigned int cpu_clock, master_clock, bus_clock, module_clock; + + /* Cache info */ + struct cache_info icache; + struct cache_info dcache; + struct cache_info scache; + + /* TLB info */ + struct tlb_info itlb; + struct tlb_info dtlb; + + unsigned long flags; +}; + +extern struct sh_cpuinfo cpu_data[]; +#define boot_cpu_data cpu_data[0] +#define current_cpu_data cpu_data[smp_processor_id()] +#define raw_current_cpu_data cpu_data[raw_smp_processor_id()] + +#endif + +/* + * User space process size: 2GB - 4k. + */ +#define TASK_SIZE 0x7ffff000UL + +#define STACK_TOP TASK_SIZE +#define STACK_TOP_MAX STACK_TOP + +/* This decides where the kernel will search for a free chunk of vm + * space during mmap's. + */ +#define TASK_UNMAPPED_BASE (TASK_SIZE / 3) + +/* + * Bit of SR register + * + * FD-bit: + * When it's set, it means the processor doesn't have right to use FPU, + * and it results exception when the floating operation is executed. + * + * IMASK-bit: + * Interrupt level mask + * + * STEP-bit: + * Single step bit + * + */ +#if defined(CONFIG_SH64_SR_WATCH) +#define SR_MMU 0x84000000 +#else +#define SR_MMU 0x80000000 +#endif + +#define SR_IMASK 0x000000f0 +#define SR_FD 0x00008000 +#define SR_SSTEP 0x08000000 + +#ifndef __ASSEMBLY__ + +/* + * FPU structure and data : require 8-byte alignment as we need to access it + with fld.p, fst.p + */ + +struct sh_fpu_hard_struct { + unsigned long fp_regs[64]; + unsigned int fpscr; + /* long status; * software status information */ +}; + +#if 0 +/* Dummy fpu emulator */ +struct sh_fpu_soft_struct { + unsigned long long fp_regs[32]; + unsigned int fpscr; + unsigned char lookahead; + unsigned long entry_pc; +}; +#endif + +union sh_fpu_union { + struct sh_fpu_hard_struct hard; + /* 'hard' itself only produces 32 bit alignment, yet we need + to access it using 64 bit load/store as well. */ + unsigned long long alignment_dummy; +}; + +struct thread_struct { + unsigned long sp; + unsigned long pc; + /* This stores the address of the pt_regs built during a context + switch, or of the register save area built for a kernel mode + exception. It is used for backtracing the stack of a sleeping task + or one that traps in kernel mode. */ + struct pt_regs *kregs; + /* This stores the address of the pt_regs constructed on entry from + user mode. It is a fixed value over the lifetime of a process, or + NULL for a kernel thread. */ + struct pt_regs *uregs; + + unsigned long trap_no, error_code; + unsigned long address; + /* Hardware debugging registers may come here */ + + /* floating point info */ + union sh_fpu_union fpu; +}; + +#define INIT_MMAP \ +{ &init_mm, 0, 0, NULL, PAGE_SHARED, VM_READ | VM_WRITE | VM_EXEC, 1, NULL, NULL } + +extern struct pt_regs fake_swapper_regs; + +#define INIT_THREAD { \ + .sp = sizeof(init_stack) + \ + (long) &init_stack, \ + .pc = 0, \ + .kregs = &fake_swapper_regs, \ + .uregs = NULL, \ + .trap_no = 0, \ + .error_code = 0, \ + .address = 0, \ + .fpu = { { { 0, } }, } \ +} + +/* + * Do necessary setup to start up a newly executed thread. + */ +#define SR_USER (SR_MMU | SR_FD) + +#define start_thread(regs, new_pc, new_sp) \ + set_fs(USER_DS); \ + regs->sr = SR_USER; /* User mode. */ \ + regs->pc = new_pc - 4; /* Compensate syscall exit */ \ + regs->pc |= 1; /* Set SHmedia ! */ \ + regs->regs[18] = 0; \ + regs->regs[15] = new_sp + +/* Forward declaration, a strange C thing */ +struct task_struct; +struct mm_struct; + +/* Free all resources held by a thread. */ +extern void release_thread(struct task_struct *); +/* + * create a kernel thread without removing it from tasklists + */ +extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags); + + +/* Copy and release all segment info associated with a VM */ +#define copy_segments(p, mm) do { } while (0) +#define release_segments(mm) do { } while (0) +#define forget_segments() do { } while (0) +#define prepare_to_copy(tsk) do { } while (0) +/* + * FPU lazy state save handling. + */ + +static inline void disable_fpu(void) +{ + unsigned long long __dummy; + + /* Set FD flag in SR */ + __asm__ __volatile__("getcon " __SR ", %0\n\t" + "or %0, %1, %0\n\t" + "putcon %0, " __SR "\n\t" + : "=&r" (__dummy) + : "r" (SR_FD)); +} + +static inline void enable_fpu(void) +{ + unsigned long long __dummy; + + /* Clear out FD flag in SR */ + __asm__ __volatile__("getcon " __SR ", %0\n\t" + "and %0, %1, %0\n\t" + "putcon %0, " __SR "\n\t" + : "=&r" (__dummy) + : "r" (~SR_FD)); +} + +/* Round to nearest, no exceptions on inexact, overflow, underflow, + zero-divide, invalid. Configure option for whether to flush denorms to + zero, or except if a denorm is encountered. */ +#if defined(CONFIG_SH64_FPU_DENORM_FLUSH) +#define FPSCR_INIT 0x00040000 +#else +#define FPSCR_INIT 0x00000000 +#endif + +#ifdef CONFIG_SH_FPU +/* Initialise the FP state of a task */ +void fpinit(struct sh_fpu_hard_struct *fpregs); +#else +#define fpinit(fpregs) do { } while (0) +#endif + +extern struct task_struct *last_task_used_math; + +/* + * Return saved PC of a blocked thread. + */ +#define thread_saved_pc(tsk) (tsk->thread.pc) + +extern unsigned long get_wchan(struct task_struct *p); + +#define KSTK_EIP(tsk) ((tsk)->thread.pc) +#define KSTK_ESP(tsk) ((tsk)->thread.sp) + +#define cpu_relax() barrier() + +#endif /* __ASSEMBLY__ */ +#endif /* __ASM_SH_PROCESSOR_64_H */ diff --git a/arch/sh/include/asm/ptrace.h b/arch/sh/include/asm/ptrace.h new file mode 100644 index 000000000000..b86aeabba61a --- /dev/null +++ b/arch/sh/include/asm/ptrace.h @@ -0,0 +1,139 @@ +#ifndef __ASM_SH_PTRACE_H +#define __ASM_SH_PTRACE_H + +/* + * Copyright (C) 1999, 2000 Niibe Yutaka + * + */ +#if defined(__SH5__) +struct pt_regs { + unsigned long long pc; + unsigned long long sr; + unsigned long long syscall_nr; + unsigned long long regs[63]; + unsigned long long tregs[8]; + unsigned long long pad[2]; +}; +#else +/* + * GCC defines register number like this: + * ----------------------------- + * 0 - 15 are integer registers + * 17 - 22 are control/special registers + * 24 - 39 fp registers + * 40 - 47 xd registers + * 48 - fpscr register + * ----------------------------- + * + * We follows above, except: + * 16 --- program counter (PC) + * 22 --- syscall # + * 23 --- floating point communication register + */ +#define REG_REG0 0 +#define REG_REG15 15 + +#define REG_PC 16 + +#define REG_PR 17 +#define REG_SR 18 +#define REG_GBR 19 +#define REG_MACH 20 +#define REG_MACL 21 + +#define REG_SYSCALL 22 + +#define REG_FPREG0 23 +#define REG_FPREG15 38 +#define REG_XFREG0 39 +#define REG_XFREG15 54 + +#define REG_FPSCR 55 +#define REG_FPUL 56 + +/* + * This struct defines the way the registers are stored on the + * kernel stack during a system call or other kernel entry. + */ +struct pt_regs { + unsigned long regs[16]; + unsigned long pc; + unsigned long pr; + unsigned long sr; + unsigned long gbr; + unsigned long mach; + unsigned long macl; + long tra; +}; + +/* + * This struct defines the way the DSP registers are stored on the + * kernel stack during a system call or other kernel entry. + */ +struct pt_dspregs { + unsigned long a1; + unsigned long a0g; + unsigned long a1g; + unsigned long m0; + unsigned long m1; + unsigned long a0; + unsigned long x0; + unsigned long x1; + unsigned long y0; + unsigned long y1; + unsigned long dsr; + unsigned long rs; + unsigned long re; + unsigned long mod; +}; + +#define PTRACE_GETFDPIC 31 /* get the ELF fdpic loadmap address */ + +#define PTRACE_GETFDPIC_EXEC 0 /* [addr] request the executable loadmap */ +#define PTRACE_GETFDPIC_INTERP 1 /* [addr] request the interpreter loadmap */ + +#define PTRACE_GETDSPREGS 55 +#define PTRACE_SETDSPREGS 56 +#endif + +#ifdef __KERNEL__ +#include <asm/addrspace.h> + +#define user_mode(regs) (((regs)->sr & 0x40000000)==0) +#define instruction_pointer(regs) ((unsigned long)(regs)->pc) + +extern void show_regs(struct pt_regs *); + +/* + * These are defined as per linux/ptrace.h. + */ +struct task_struct; + +#define arch_has_single_step() (1) +extern void user_enable_single_step(struct task_struct *); +extern void user_disable_single_step(struct task_struct *); + +#ifdef CONFIG_SH_DSP +#define task_pt_regs(task) \ + ((struct pt_regs *) (task_stack_page(task) + THREAD_SIZE \ + - sizeof(struct pt_dspregs) - sizeof(unsigned long)) - 1) +#else +#define task_pt_regs(task) \ + ((struct pt_regs *) (task_stack_page(task) + THREAD_SIZE \ + - sizeof(unsigned long)) - 1) +#endif + +static inline unsigned long profile_pc(struct pt_regs *regs) +{ + unsigned long pc = instruction_pointer(regs); + +#ifdef P2SEG + if (pc >= P2SEG && pc < P3SEG) + pc -= 0x20000000; +#endif + + return pc; +} +#endif /* __KERNEL__ */ + +#endif /* __ASM_SH_PTRACE_H */ diff --git a/arch/sh/include/asm/push-switch.h b/arch/sh/include/asm/push-switch.h new file mode 100644 index 000000000000..4903f9e52dd8 --- /dev/null +++ b/arch/sh/include/asm/push-switch.h @@ -0,0 +1,31 @@ +#ifndef __ASM_SH_PUSH_SWITCH_H +#define __ASM_SH_PUSH_SWITCH_H + +#include <linux/timer.h> +#include <linux/interrupt.h> +#include <linux/workqueue.h> +#include <linux/platform_device.h> + +struct push_switch { + /* switch state */ + unsigned int state:1; + /* debounce timer */ + struct timer_list debounce; + /* workqueue */ + struct work_struct work; + /* platform device, for workqueue handler */ + struct platform_device *pdev; +}; + +struct push_switch_platform_info { + /* IRQ handler */ + irqreturn_t (*irq_handler)(int irq, void *data); + /* Special IRQ flags */ + unsigned int irq_flags; + /* Bit location of switch */ + unsigned int bit; + /* Symbolic switch name */ + const char *name; +}; + +#endif /* __ASM_SH_PUSH_SWITCH_H */ diff --git a/arch/sh/include/asm/r7780rp.h b/arch/sh/include/asm/r7780rp.h new file mode 100644 index 000000000000..306f7359f7d4 --- /dev/null +++ b/arch/sh/include/asm/r7780rp.h @@ -0,0 +1,198 @@ +#ifndef __ASM_SH_RENESAS_R7780RP_H +#define __ASM_SH_RENESAS_R7780RP_H + +/* Box specific addresses. */ +#if defined(CONFIG_SH_R7780MP) +#define PA_BCR 0xa4000000 /* FPGA */ +#define PA_SDPOW (-1) + +#define PA_IRLMSK (PA_BCR+0x0000) /* Interrupt Mask control */ +#define PA_IRLMON (PA_BCR+0x0002) /* Interrupt Status control */ +#define PA_IRLPRI1 (PA_BCR+0x0004) /* Interrupt Priorty 1 */ +#define PA_IRLPRI2 (PA_BCR+0x0006) /* Interrupt Priorty 2 */ +#define PA_IRLPRI3 (PA_BCR+0x0008) /* Interrupt Priorty 3 */ +#define PA_IRLPRI4 (PA_BCR+0x000a) /* Interrupt Priorty 4 */ +#define PA_RSTCTL (PA_BCR+0x000c) /* Reset Control */ +#define PA_PCIBD (PA_BCR+0x000e) /* PCI Board detect control */ +#define PA_PCICD (PA_BCR+0x0010) /* PCI Conector detect control */ +#define PA_EXTGIO (PA_BCR+0x0016) /* Extension GPIO Control */ +#define PA_IVDRMON (PA_BCR+0x0018) /* iVDR Moniter control */ +#define PA_IVDRCTL (PA_BCR+0x001a) /* iVDR control */ +#define PA_OBLED (PA_BCR+0x001c) /* On Board LED control */ +#define PA_OBSW (PA_BCR+0x001e) /* On Board Switch control */ +#define PA_AUDIOSEL (PA_BCR+0x0020) /* Sound Interface Select control */ +#define PA_EXTPLR (PA_BCR+0x001e) /* Extention Pin Polarity control */ +#define PA_TPCTL (PA_BCR+0x0100) /* Touch Panel Access control */ +#define PA_TPDCKCTL (PA_BCR+0x0102) /* Touch Panel Access data control */ +#define PA_TPCTLCLR (PA_BCR+0x0104) /* Touch Panel Access control */ +#define PA_TPXPOS (PA_BCR+0x0106) /* Touch Panel X position control */ +#define PA_TPYPOS (PA_BCR+0x0108) /* Touch Panel Y position control */ +#define PA_DBSW (PA_BCR+0x0200) /* Debug Board Switch control */ +#define PA_CFCTL (PA_BCR+0x0300) /* CF Timing control */ +#define PA_CFPOW (PA_BCR+0x0302) /* CF Power control */ +#define PA_CFCDINTCLR (PA_BCR+0x0304) /* CF Insert Interrupt clear */ +#define PA_SCSMR0 (PA_BCR+0x0400) /* SCIF0 Serial mode control */ +#define PA_SCBRR0 (PA_BCR+0x0404) /* SCIF0 Bit rate control */ +#define PA_SCSCR0 (PA_BCR+0x0408) /* SCIF0 Serial control */ +#define PA_SCFTDR0 (PA_BCR+0x040c) /* SCIF0 Send FIFO control */ +#define PA_SCFSR0 (PA_BCR+0x0410) /* SCIF0 Serial status control */ +#define PA_SCFRDR0 (PA_BCR+0x0414) /* SCIF0 Receive FIFO control */ +#define PA_SCFCR0 (PA_BCR+0x0418) /* SCIF0 FIFO control */ +#define PA_SCTFDR0 (PA_BCR+0x041c) /* SCIF0 Send FIFO data control */ +#define PA_SCRFDR0 (PA_BCR+0x0420) /* SCIF0 Receive FIFO data control */ +#define PA_SCSPTR0 (PA_BCR+0x0424) /* SCIF0 Serial Port control */ +#define PA_SCLSR0 (PA_BCR+0x0428) /* SCIF0 Line Status control */ +#define PA_SCRER0 (PA_BCR+0x042c) /* SCIF0 Serial Error control */ +#define PA_SCSMR1 (PA_BCR+0x0500) /* SCIF1 Serial mode control */ +#define PA_SCBRR1 (PA_BCR+0x0504) /* SCIF1 Bit rate control */ +#define PA_SCSCR1 (PA_BCR+0x0508) /* SCIF1 Serial control */ +#define PA_SCFTDR1 (PA_BCR+0x050c) /* SCIF1 Send FIFO control */ +#define PA_SCFSR1 (PA_BCR+0x0510) /* SCIF1 Serial status control */ +#define PA_SCFRDR1 (PA_BCR+0x0514) /* SCIF1 Receive FIFO control */ +#define PA_SCFCR1 (PA_BCR+0x0518) /* SCIF1 FIFO control */ +#define PA_SCTFDR1 (PA_BCR+0x051c) /* SCIF1 Send FIFO data control */ +#define PA_SCRFDR1 (PA_BCR+0x0520) /* SCIF1 Receive FIFO data control */ +#define PA_SCSPTR1 (PA_BCR+0x0524) /* SCIF1 Serial Port control */ +#define PA_SCLSR1 (PA_BCR+0x0528) /* SCIF1 Line Status control */ +#define PA_SCRER1 (PA_BCR+0x052c) /* SCIF1 Serial Error control */ +#define PA_SMCR (PA_BCR+0x0600) /* 2-wire Serial control */ +#define PA_SMSMADR (PA_BCR+0x0602) /* 2-wire Serial Slave control */ +#define PA_SMMR (PA_BCR+0x0604) /* 2-wire Serial Mode control */ +#define PA_SMSADR1 (PA_BCR+0x0606) /* 2-wire Serial Address1 control */ +#define PA_SMTRDR1 (PA_BCR+0x0646) /* 2-wire Serial Data1 control */ +#define PA_VERREG (PA_BCR+0x0700) /* FPGA Version Register */ +#define PA_POFF (PA_BCR+0x0800) /* System Power Off control */ +#define PA_PMR (PA_BCR+0x0900) /* */ + +#define IRLCNTR1 (PA_BCR + 0) /* Interrupt Control Register1 */ +#define IVDR_CK_ON 8 /* iVDR Clock ON */ + +#elif defined(CONFIG_SH_R7780RP) +#define PA_POFF (-1) + +#define PA_BCR 0xa5000000 /* FPGA */ +#define PA_IRLMSK (PA_BCR+0x0000) /* Interrupt Mask control */ +#define PA_IRLMON (PA_BCR+0x0002) /* Interrupt Status control */ +#define PA_SDPOW (PA_BCR+0x0004) /* SD Power control */ +#define PA_RSTCTL (PA_BCR+0x0006) /* Device Reset control */ +#define PA_PCIBD (PA_BCR+0x0008) /* PCI Board detect control */ +#define PA_PCICD (PA_BCR+0x000a) /* PCI Conector detect control */ +#define PA_ZIGIO1 (PA_BCR+0x000c) /* Zigbee IO control 1 */ +#define PA_ZIGIO2 (PA_BCR+0x000e) /* Zigbee IO control 2 */ +#define PA_ZIGIO3 (PA_BCR+0x0010) /* Zigbee IO control 3 */ +#define PA_ZIGIO4 (PA_BCR+0x0012) /* Zigbee IO control 4 */ +#define PA_IVDRMON (PA_BCR+0x0014) /* iVDR Moniter control */ +#define PA_IVDRCTL (PA_BCR+0x0016) /* iVDR control */ +#define PA_OBLED (PA_BCR+0x0018) /* On Board LED control */ +#define PA_OBSW (PA_BCR+0x001a) /* On Board Switch control */ +#define PA_AUDIOSEL (PA_BCR+0x001c) /* Sound Interface Select control */ +#define PA_EXTPLR (PA_BCR+0x001e) /* Extention Pin Polarity control */ +#define PA_TPCTL (PA_BCR+0x0100) /* Touch Panel Access control */ +#define PA_TPDCKCTL (PA_BCR+0x0102) /* Touch Panel Access data control */ +#define PA_TPCTLCLR (PA_BCR+0x0104) /* Touch Panel Access control */ +#define PA_TPXPOS (PA_BCR+0x0106) /* Touch Panel X position control */ +#define PA_TPYPOS (PA_BCR+0x0108) /* Touch Panel Y position control */ +#define PA_DBDET (PA_BCR+0x0200) /* Debug Board detect control */ +#define PA_DBDISPCTL (PA_BCR+0x0202) /* Debug Board Dot timing control */ +#define PA_DBSW (PA_BCR+0x0204) /* Debug Board Switch control */ +#define PA_CFCTL (PA_BCR+0x0300) /* CF Timing control */ +#define PA_CFPOW (PA_BCR+0x0302) /* CF Power control */ +#define PA_CFCDINTCLR (PA_BCR+0x0304) /* CF Insert Interrupt clear */ +#define PA_SCSMR (PA_BCR+0x0400) /* SCIF Serial mode control */ +#define PA_SCBRR (PA_BCR+0x0402) /* SCIF Bit rate control */ +#define PA_SCSCR (PA_BCR+0x0404) /* SCIF Serial control */ +#define PA_SCFDTR (PA_BCR+0x0406) /* SCIF Send FIFO control */ +#define PA_SCFSR (PA_BCR+0x0408) /* SCIF Serial status control */ +#define PA_SCFRDR (PA_BCR+0x040a) /* SCIF Receive FIFO control */ +#define PA_SCFCR (PA_BCR+0x040c) /* SCIF FIFO control */ +#define PA_SCFDR (PA_BCR+0x040e) /* SCIF FIFO data control */ +#define PA_SCLSR (PA_BCR+0x0412) /* SCIF Line Status control */ +#define PA_SMCR (PA_BCR+0x0500) /* 2-wire Serial control */ +#define PA_SMSMADR (PA_BCR+0x0502) /* 2-wire Serial Slave control */ +#define PA_SMMR (PA_BCR+0x0504) /* 2-wire Serial Mode control */ +#define PA_SMSADR1 (PA_BCR+0x0506) /* 2-wire Serial Address1 control */ +#define PA_SMTRDR1 (PA_BCR+0x0546) /* 2-wire Serial Data1 control */ +#define PA_VERREG (PA_BCR+0x0600) /* FPGA Version Register */ + +#define PA_AX88796L 0xa5800400 /* AX88796L Area */ +#define PA_SC1602BSLB 0xa6000000 /* SC1602BSLB Area */ +#define PA_IDE_OFFSET 0x1f0 /* CF IDE Offset */ +#define AX88796L_IO_BASE 0x1000 /* AX88796L IO Base Address */ + +#define IRLCNTR1 (PA_BCR + 0) /* Interrupt Control Register1 */ + +#define IVDR_CK_ON 8 /* iVDR Clock ON */ + +#elif defined(CONFIG_SH_R7785RP) +#define PA_BCR 0xa4000000 /* FPGA */ +#define PA_SDPOW (-1) + +#define PA_PCISCR (PA_BCR+0x0000) +#define PA_IRLPRA (PA_BCR+0x0002) +#define PA_IRLPRB (PA_BCR+0x0004) +#define PA_IRLPRC (PA_BCR+0x0006) +#define PA_IRLPRD (PA_BCR+0x0008) +#define IRLCNTR1 (PA_BCR+0x0010) +#define PA_IRLPRE (PA_BCR+0x000a) +#define PA_IRLPRF (PA_BCR+0x000c) +#define PA_EXIRLCR (PA_BCR+0x000e) +#define PA_IRLMCR1 (PA_BCR+0x0010) +#define PA_IRLMCR2 (PA_BCR+0x0012) +#define PA_IRLSSR1 (PA_BCR+0x0014) +#define PA_IRLSSR2 (PA_BCR+0x0016) +#define PA_CFTCR (PA_BCR+0x0100) +#define PA_CFPCR (PA_BCR+0x0102) +#define PA_PCICR (PA_BCR+0x0110) +#define PA_IVDRCTL (PA_BCR+0x0112) +#define PA_IVDRSR (PA_BCR+0x0114) +#define PA_PDRSTCR (PA_BCR+0x0116) +#define PA_POFF (PA_BCR+0x0120) +#define PA_LCDCR (PA_BCR+0x0130) +#define PA_TPCR (PA_BCR+0x0140) +#define PA_TPCKCR (PA_BCR+0x0142) +#define PA_TPRSTR (PA_BCR+0x0144) +#define PA_TPXPDR (PA_BCR+0x0146) +#define PA_TPYPDR (PA_BCR+0x0148) +#define PA_GPIOPFR (PA_BCR+0x0150) +#define PA_GPIODR (PA_BCR+0x0152) +#define PA_OBLED (PA_BCR+0x0154) +#define PA_SWSR (PA_BCR+0x0156) +#define PA_VERREG (PA_BCR+0x0158) +#define PA_SMCR (PA_BCR+0x0200) +#define PA_SMSMADR (PA_BCR+0x0202) +#define PA_SMMR (PA_BCR+0x0204) +#define PA_SMSADR1 (PA_BCR+0x0206) +#define PA_SMSADR32 (PA_BCR+0x0244) +#define PA_SMTRDR1 (PA_BCR+0x0246) +#define PA_SMTRDR16 (PA_BCR+0x0264) +#define PA_CU3MDR (PA_BCR+0x0300) +#define PA_CU5MDR (PA_BCR+0x0302) +#define PA_MMSR (PA_BCR+0x0400) + +#define IVDR_CK_ON 4 /* iVDR Clock ON */ +#endif + +#define HL_FPGA_IRQ_BASE 200 +#define HL_NR_IRL 15 + +#define IRQ_AX88796 (HL_FPGA_IRQ_BASE + 0) +#define IRQ_CF (HL_FPGA_IRQ_BASE + 1) +#define IRQ_PSW (HL_FPGA_IRQ_BASE + 2) +#define IRQ_EXT0 (HL_FPGA_IRQ_BASE + 3) +#define IRQ_EXT1 (HL_FPGA_IRQ_BASE + 4) +#define IRQ_EXT2 (HL_FPGA_IRQ_BASE + 5) +#define IRQ_EXT3 (HL_FPGA_IRQ_BASE + 6) +#define IRQ_EXT4 (HL_FPGA_IRQ_BASE + 7) +#define IRQ_EXT5 (HL_FPGA_IRQ_BASE + 8) +#define IRQ_EXT6 (HL_FPGA_IRQ_BASE + 9) +#define IRQ_EXT7 (HL_FPGA_IRQ_BASE + 10) +#define IRQ_SMBUS (HL_FPGA_IRQ_BASE + 11) +#define IRQ_TP (HL_FPGA_IRQ_BASE + 12) +#define IRQ_RTC (HL_FPGA_IRQ_BASE + 13) +#define IRQ_TH_ALERT (HL_FPGA_IRQ_BASE + 14) +#define IRQ_SCIF0 (HL_FPGA_IRQ_BASE + 15) +#define IRQ_SCIF1 (HL_FPGA_IRQ_BASE + 16) + +unsigned char *highlander_plat_irq_setup(void); + +#endif /* __ASM_SH_RENESAS_R7780RP */ diff --git a/arch/sh/include/asm/resource.h b/arch/sh/include/asm/resource.h new file mode 100644 index 000000000000..9c2499a86ec0 --- /dev/null +++ b/arch/sh/include/asm/resource.h @@ -0,0 +1,6 @@ +#ifndef __ASM_SH_RESOURCE_H +#define __ASM_SH_RESOURCE_H + +#include <asm-generic/resource.h> + +#endif /* __ASM_SH_RESOURCE_H */ diff --git a/arch/sh/include/asm/rtc.h b/arch/sh/include/asm/rtc.h new file mode 100644 index 000000000000..1813f4202a24 --- /dev/null +++ b/arch/sh/include/asm/rtc.h @@ -0,0 +1,16 @@ +#ifndef _ASM_RTC_H +#define _ASM_RTC_H + +extern void (*board_time_init)(void); +extern void (*rtc_sh_get_time)(struct timespec *); +extern int (*rtc_sh_set_time)(const time_t); + +#define RTC_CAP_4_DIGIT_YEAR (1 << 0) + +struct sh_rtc_platform_info { + unsigned long capabilities; +}; + +#include <cpu/rtc.h> + +#endif /* _ASM_RTC_H */ diff --git a/arch/sh/include/asm/rts7751r2d.h b/arch/sh/include/asm/rts7751r2d.h new file mode 100644 index 000000000000..0a800157b826 --- /dev/null +++ b/arch/sh/include/asm/rts7751r2d.h @@ -0,0 +1,70 @@ +#ifndef __ASM_SH_RENESAS_RTS7751R2D_H +#define __ASM_SH_RENESAS_RTS7751R2D_H + +/* + * linux/include/asm-sh/renesas_rts7751r2d.h + * + * Copyright (C) 2000 Atom Create Engineering Co., Ltd. + * + * Renesas Technology Sales RTS7751R2D support + */ + +/* Board specific addresses. */ + +#define PA_BCR 0xa4000000 /* FPGA */ +#define PA_IRLMON 0xa4000002 /* Interrupt Status control */ +#define PA_CFCTL 0xa4000004 /* CF Timing control */ +#define PA_CFPOW 0xa4000006 /* CF Power control */ +#define PA_DISPCTL 0xa4000008 /* Display Timing control */ +#define PA_SDMPOW 0xa400000a /* SD Power control */ +#define PA_RTCCE 0xa400000c /* RTC(9701) Enable control */ +#define PA_PCICD 0xa400000e /* PCI Extention detect control */ +#define PA_VOYAGERRTS 0xa4000020 /* VOYAGER Reset control */ + +#define PA_R2D1_AXRST 0xa4000022 /* AX_LAN Reset control */ +#define PA_R2D1_CFRST 0xa4000024 /* CF Reset control */ +#define PA_R2D1_ADMRTS 0xa4000026 /* SD Reset control */ +#define PA_R2D1_EXTRST 0xa4000028 /* Extention Reset control */ +#define PA_R2D1_CFCDINTCLR 0xa400002a /* CF Insert Interrupt clear */ + +#define PA_R2DPLUS_CFRST 0xa4000022 /* CF Reset control */ +#define PA_R2DPLUS_ADMRTS 0xa4000024 /* SD Reset control */ +#define PA_R2DPLUS_EXTRST 0xa4000026 /* Extention Reset control */ +#define PA_R2DPLUS_CFCDINTCLR 0xa4000028 /* CF Insert Interrupt clear */ +#define PA_R2DPLUS_KEYCTLCLR 0xa400002a /* Key Interrupt clear */ + +#define PA_POWOFF 0xa4000030 /* Board Power OFF control */ +#define PA_VERREG 0xa4000032 /* FPGA Version Register */ +#define PA_INPORT 0xa4000034 /* KEY Input Port control */ +#define PA_OUTPORT 0xa4000036 /* LED control */ +#define PA_BVERREG 0xa4000038 /* Board Revision Register */ + +#define PA_AX88796L 0xaa000400 /* AX88796L Area */ +#define PA_VOYAGER 0xab000000 /* VOYAGER GX Area */ +#define PA_IDE_OFFSET 0x1f0 /* CF IDE Offset */ +#define AX88796L_IO_BASE 0x1000 /* AX88796L IO Base Address */ + +#define IRLCNTR1 (PA_BCR + 0) /* Interrupt Control Register1 */ + +#define R2D_FPGA_IRQ_BASE 100 + +#define IRQ_VOYAGER (R2D_FPGA_IRQ_BASE + 0) +#define IRQ_EXT (R2D_FPGA_IRQ_BASE + 1) +#define IRQ_TP (R2D_FPGA_IRQ_BASE + 2) +#define IRQ_RTC_T (R2D_FPGA_IRQ_BASE + 3) +#define IRQ_RTC_A (R2D_FPGA_IRQ_BASE + 4) +#define IRQ_SDCARD (R2D_FPGA_IRQ_BASE + 5) +#define IRQ_CF_CD (R2D_FPGA_IRQ_BASE + 6) +#define IRQ_CF_IDE (R2D_FPGA_IRQ_BASE + 7) +#define IRQ_AX88796 (R2D_FPGA_IRQ_BASE + 8) +#define IRQ_KEY (R2D_FPGA_IRQ_BASE + 9) +#define IRQ_PCI_INTA (R2D_FPGA_IRQ_BASE + 10) +#define IRQ_PCI_INTB (R2D_FPGA_IRQ_BASE + 11) +#define IRQ_PCI_INTC (R2D_FPGA_IRQ_BASE + 12) +#define IRQ_PCI_INTD (R2D_FPGA_IRQ_BASE + 13) + +/* arch/sh/boards/renesas/rts7751r2d/irq.c */ +void init_rts7751r2d_IRQ(void); +int rts7751r2d_irq_demux(int); + +#endif /* __ASM_SH_RENESAS_RTS7751R2D */ diff --git a/arch/sh/include/asm/rwsem.h b/arch/sh/include/asm/rwsem.h new file mode 100644 index 000000000000..1987f3ea7f1b --- /dev/null +++ b/arch/sh/include/asm/rwsem.h @@ -0,0 +1,188 @@ +/* + * include/asm-sh/rwsem.h: R/W semaphores for SH using the stuff + * in lib/rwsem.c. + */ + +#ifndef _ASM_SH_RWSEM_H +#define _ASM_SH_RWSEM_H + +#ifndef _LINUX_RWSEM_H +#error "please don't include asm/rwsem.h directly, use linux/rwsem.h instead" +#endif + +#ifdef __KERNEL__ +#include <linux/list.h> +#include <linux/spinlock.h> +#include <asm/atomic.h> +#include <asm/system.h> + +/* + * the semaphore definition + */ +struct rw_semaphore { + long count; +#define RWSEM_UNLOCKED_VALUE 0x00000000 +#define RWSEM_ACTIVE_BIAS 0x00000001 +#define RWSEM_ACTIVE_MASK 0x0000ffff +#define RWSEM_WAITING_BIAS (-0x00010000) +#define RWSEM_ACTIVE_READ_BIAS RWSEM_ACTIVE_BIAS +#define RWSEM_ACTIVE_WRITE_BIAS (RWSEM_WAITING_BIAS + RWSEM_ACTIVE_BIAS) + spinlock_t wait_lock; + struct list_head wait_list; +#ifdef CONFIG_DEBUG_LOCK_ALLOC + struct lockdep_map dep_map; +#endif +}; + +#ifdef CONFIG_DEBUG_LOCK_ALLOC +# define __RWSEM_DEP_MAP_INIT(lockname) , .dep_map = { .name = #lockname } +#else +# define __RWSEM_DEP_MAP_INIT(lockname) +#endif + +#define __RWSEM_INITIALIZER(name) \ + { RWSEM_UNLOCKED_VALUE, SPIN_LOCK_UNLOCKED, \ + LIST_HEAD_INIT((name).wait_list) \ + __RWSEM_DEP_MAP_INIT(name) } + +#define DECLARE_RWSEM(name) \ + struct rw_semaphore name = __RWSEM_INITIALIZER(name) + +extern struct rw_semaphore *rwsem_down_read_failed(struct rw_semaphore *sem); +extern struct rw_semaphore *rwsem_down_write_failed(struct rw_semaphore *sem); +extern struct rw_semaphore *rwsem_wake(struct rw_semaphore *sem); +extern struct rw_semaphore *rwsem_downgrade_wake(struct rw_semaphore *sem); + +extern void __init_rwsem(struct rw_semaphore *sem, const char *name, + struct lock_class_key *key); + +#define init_rwsem(sem) \ +do { \ + static struct lock_class_key __key; \ + \ + __init_rwsem((sem), #sem, &__key); \ +} while (0) + +static inline void init_rwsem(struct rw_semaphore *sem) +{ + sem->count = RWSEM_UNLOCKED_VALUE; + spin_lock_init(&sem->wait_lock); + INIT_LIST_HEAD(&sem->wait_list); +} + +/* + * lock for reading + */ +static inline void __down_read(struct rw_semaphore *sem) +{ + if (atomic_inc_return((atomic_t *)(&sem->count)) > 0) + smp_wmb(); + else + rwsem_down_read_failed(sem); +} + +static inline int __down_read_trylock(struct rw_semaphore *sem) +{ + int tmp; + + while ((tmp = sem->count) >= 0) { + if (tmp == cmpxchg(&sem->count, tmp, + tmp + RWSEM_ACTIVE_READ_BIAS)) { + smp_wmb(); + return 1; + } + } + return 0; +} + +/* + * lock for writing + */ +static inline void __down_write(struct rw_semaphore *sem) +{ + int tmp; + + tmp = atomic_add_return(RWSEM_ACTIVE_WRITE_BIAS, + (atomic_t *)(&sem->count)); + if (tmp == RWSEM_ACTIVE_WRITE_BIAS) + smp_wmb(); + else + rwsem_down_write_failed(sem); +} + +static inline int __down_write_trylock(struct rw_semaphore *sem) +{ + int tmp; + + tmp = cmpxchg(&sem->count, RWSEM_UNLOCKED_VALUE, + RWSEM_ACTIVE_WRITE_BIAS); + smp_wmb(); + return tmp == RWSEM_UNLOCKED_VALUE; +} + +/* + * unlock after reading + */ +static inline void __up_read(struct rw_semaphore *sem) +{ + int tmp; + + smp_wmb(); + tmp = atomic_dec_return((atomic_t *)(&sem->count)); + if (tmp < -1 && (tmp & RWSEM_ACTIVE_MASK) == 0) + rwsem_wake(sem); +} + +/* + * unlock after writing + */ +static inline void __up_write(struct rw_semaphore *sem) +{ + smp_wmb(); + if (atomic_sub_return(RWSEM_ACTIVE_WRITE_BIAS, + (atomic_t *)(&sem->count)) < 0) + rwsem_wake(sem); +} + +/* + * implement atomic add functionality + */ +static inline void rwsem_atomic_add(int delta, struct rw_semaphore *sem) +{ + atomic_add(delta, (atomic_t *)(&sem->count)); +} + +/* + * downgrade write lock to read lock + */ +static inline void __downgrade_write(struct rw_semaphore *sem) +{ + int tmp; + + smp_wmb(); + tmp = atomic_add_return(-RWSEM_WAITING_BIAS, (atomic_t *)(&sem->count)); + if (tmp < 0) + rwsem_downgrade_wake(sem); +} + +static inline void __down_write_nested(struct rw_semaphore *sem, int subclass) +{ + __down_write(sem); +} + +/* + * implement exchange and add functionality + */ +static inline int rwsem_atomic_update(int delta, struct rw_semaphore *sem) +{ + smp_mb(); + return atomic_add_return(delta, (atomic_t *)(&sem->count)); +} + +static inline int rwsem_is_locked(struct rw_semaphore *sem) +{ + return (sem->count != 0); +} + +#endif /* __KERNEL__ */ +#endif /* _ASM_SH_RWSEM_H */ diff --git a/arch/sh/include/asm/scatterlist.h b/arch/sh/include/asm/scatterlist.h new file mode 100644 index 000000000000..2084d0373693 --- /dev/null +++ b/arch/sh/include/asm/scatterlist.h @@ -0,0 +1,27 @@ +#ifndef __ASM_SH_SCATTERLIST_H +#define __ASM_SH_SCATTERLIST_H + +#include <asm/types.h> + +struct scatterlist { +#ifdef CONFIG_DEBUG_SG + unsigned long sg_magic; +#endif + unsigned long page_link; + unsigned int offset;/* for highmem, page offset */ + dma_addr_t dma_address; + unsigned int length; +}; + +#define ISA_DMA_THRESHOLD PHYS_ADDR_MASK + +/* These macros should be used after a pci_map_sg call has been done + * to get bus addresses of each of the SG entries and their lengths. + * You should only work with the number of sg entries pci_map_sg + * returns, or alternatively stop on the first sg_dma_len(sg) which + * is 0. + */ +#define sg_dma_address(sg) ((sg)->dma_address) +#define sg_dma_len(sg) ((sg)->length) + +#endif /* !(__ASM_SH_SCATTERLIST_H) */ diff --git a/arch/sh/include/asm/sdk7780.h b/arch/sh/include/asm/sdk7780.h new file mode 100644 index 000000000000..697dc865f21b --- /dev/null +++ b/arch/sh/include/asm/sdk7780.h @@ -0,0 +1,81 @@ +#ifndef __ASM_SH_RENESAS_SDK7780_H +#define __ASM_SH_RENESAS_SDK7780_H + +/* + * linux/include/asm-sh/sdk7780.h + * + * Renesas Solutions SH7780 SDK Support + * Copyright (C) 2008 Nicholas Beck <nbeck@mpc-data.co.uk> + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <asm/addrspace.h> + +/* Box specific addresses. */ +#define SE_AREA0_WIDTH 4 /* Area0: 32bit */ +#define PA_ROM 0xa0000000 /* EPROM */ +#define PA_ROM_SIZE 0x00400000 /* EPROM size 4M byte */ +#define PA_FROM 0xa0800000 /* Flash-ROM */ +#define PA_FROM_SIZE 0x00400000 /* Flash-ROM size 4M byte */ +#define PA_EXT1 0xa4000000 +#define PA_EXT1_SIZE 0x04000000 +#define PA_SDRAM 0xa8000000 /* DDR-SDRAM(Area2/3) 128MB */ +#define PA_SDRAM_SIZE 0x08000000 + +#define PA_EXT4 0xb0000000 +#define PA_EXT4_SIZE 0x04000000 +#define PA_EXT_USER PA_EXT4 /* User Expansion Space */ + +#define PA_PERIPHERAL PA_AREA5_IO + +/* SRAM/Reserved */ +#define PA_RESERVED (PA_PERIPHERAL + 0) +/* FPGA base address */ +#define PA_FPGA (PA_PERIPHERAL + 0x01000000) +/* SMC LAN91C111 */ +#define PA_LAN (PA_PERIPHERAL + 0x01800000) + + +#define FPGA_SRSTR (PA_FPGA + 0x000) /* System reset */ +#define FPGA_IRQ0SR (PA_FPGA + 0x010) /* IRQ0 status */ +#define FPGA_IRQ0MR (PA_FPGA + 0x020) /* IRQ0 mask */ +#define FPGA_BDMR (PA_FPGA + 0x030) /* Board operating mode */ +#define FPGA_INTT0PRTR (PA_FPGA + 0x040) /* Interrupt test mode0 port */ +#define FPGA_INTT0SELR (PA_FPGA + 0x050) /* Int. test mode0 select */ +#define FPGA_INTT1POLR (PA_FPGA + 0x060) /* Int. test mode0 polarity */ +#define FPGA_NMIR (PA_FPGA + 0x070) /* NMI source */ +#define FPGA_NMIMR (PA_FPGA + 0x080) /* NMI mask */ +#define FPGA_IRQR (PA_FPGA + 0x090) /* IRQX source */ +#define FPGA_IRQMR (PA_FPGA + 0x0A0) /* IRQX mask */ +#define FPGA_SLEDR (PA_FPGA + 0x0B0) /* LED control */ +#define PA_LED FPGA_SLEDR +#define FPGA_MAPSWR (PA_FPGA + 0x0C0) /* Map switch */ +#define FPGA_FPVERR (PA_FPGA + 0x0D0) /* FPGA version */ +#define FPGA_FPDATER (PA_FPGA + 0x0E0) /* FPGA date */ +#define FPGA_RSE (PA_FPGA + 0x100) /* Reset source */ +#define FPGA_EASR (PA_FPGA + 0x110) /* External area select */ +#define FPGA_SPER (PA_FPGA + 0x120) /* Serial port enable */ +#define FPGA_IMSR (PA_FPGA + 0x130) /* Interrupt mode select */ +#define FPGA_PCIMR (PA_FPGA + 0x140) /* PCI Mode */ +#define FPGA_DIPSWMR (PA_FPGA + 0x150) /* DIPSW monitor */ +#define FPGA_FPODR (PA_FPGA + 0x160) /* Output port data */ +#define FPGA_ATAESR (PA_FPGA + 0x170) /* ATA extended bus status */ +#define FPGA_IRQPOLR (PA_FPGA + 0x180) /* IRQx polarity */ + + +#define SDK7780_NR_IRL 15 +/* IDE/ATA interrupt */ +#define IRQ_CFCARD 14 +/* SMC interrupt */ +#define IRQ_ETHERNET 6 + + +/* arch/sh/boards/renesas/sdk7780/irq.c */ +void init_sdk7780_IRQ(void); + +#define __IO_PREFIX sdk7780 +#include <asm/io_generic.h> + +#endif /* __ASM_SH_RENESAS_SDK7780_H */ diff --git a/arch/sh/include/asm/seccomp.h b/arch/sh/include/asm/seccomp.h new file mode 100644 index 000000000000..3280ed3802ef --- /dev/null +++ b/arch/sh/include/asm/seccomp.h @@ -0,0 +1,10 @@ +#ifndef __ASM_SECCOMP_H + +#include <linux/unistd.h> + +#define __NR_seccomp_read __NR_read +#define __NR_seccomp_write __NR_write +#define __NR_seccomp_exit __NR_exit +#define __NR_seccomp_sigreturn __NR_rt_sigreturn + +#endif /* __ASM_SECCOMP_H */ diff --git a/arch/sh/include/asm/sections.h b/arch/sh/include/asm/sections.h new file mode 100644 index 000000000000..8f8f4ad400df --- /dev/null +++ b/arch/sh/include/asm/sections.h @@ -0,0 +1,11 @@ +#ifndef __ASM_SH_SECTIONS_H +#define __ASM_SH_SECTIONS_H + +#include <asm-generic/sections.h> + +extern long __machvec_start, __machvec_end; +extern char __uncached_start, __uncached_end; +extern char _ebss[]; + +#endif /* __ASM_SH_SECTIONS_H */ + diff --git a/arch/sh/include/asm/segment.h b/arch/sh/include/asm/segment.h new file mode 100644 index 000000000000..5e2725f4ac49 --- /dev/null +++ b/arch/sh/include/asm/segment.h @@ -0,0 +1,34 @@ +#ifndef __ASM_SH_SEGMENT_H +#define __ASM_SH_SEGMENT_H + +#ifndef __ASSEMBLY__ + +typedef struct { + unsigned long seg; +} mm_segment_t; + +#define MAKE_MM_SEG(s) ((mm_segment_t) { (s) }) + +/* + * The fs value determines whether argument validity checking should be + * performed or not. If get_fs() == USER_DS, checking is performed, with + * get_fs() == KERNEL_DS, checking is bypassed. + * + * For historical reasons, these macros are grossly misnamed. + */ +#define KERNEL_DS MAKE_MM_SEG(0xFFFFFFFFUL) +#ifdef CONFIG_MMU +#define USER_DS MAKE_MM_SEG(PAGE_OFFSET) +#else +#define USER_DS KERNEL_DS +#endif + +#define segment_eq(a,b) ((a).seg == (b).seg) + +#define get_ds() (KERNEL_DS) + +#define get_fs() (current_thread_info()->addr_limit) +#define set_fs(x) (current_thread_info()->addr_limit = (x)) + +#endif /* __ASSEMBLY__ */ +#endif /* __ASM_SH_SEGMENT_H */ diff --git a/arch/sh/include/asm/sembuf.h b/arch/sh/include/asm/sembuf.h new file mode 100644 index 000000000000..d79f3bd570b2 --- /dev/null +++ b/arch/sh/include/asm/sembuf.h @@ -0,0 +1,25 @@ +#ifndef __ASM_SH_SEMBUF_H +#define __ASM_SH_SEMBUF_H + +/* + * The semid64_ds structure for i386 architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 64-bit time_t to solve y2038 problem + * - 2 miscellaneous 32-bit values + */ + +struct semid64_ds { + struct ipc64_perm sem_perm; /* permissions .. see ipc.h */ + __kernel_time_t sem_otime; /* last semop time */ + unsigned long __unused1; + __kernel_time_t sem_ctime; /* last change time */ + unsigned long __unused2; + unsigned long sem_nsems; /* no. of semaphores in array */ + unsigned long __unused3; + unsigned long __unused4; +}; + +#endif /* __ASM_SH_SEMBUF_H */ diff --git a/arch/sh/include/asm/serial.h b/arch/sh/include/asm/serial.h new file mode 100644 index 000000000000..e13cc948ee60 --- /dev/null +++ b/arch/sh/include/asm/serial.h @@ -0,0 +1,36 @@ +/* + * include/asm-sh/serial.h + * + * Configuration details for 8250, 16450, 16550, etc. serial ports + */ + +#ifndef _ASM_SERIAL_H +#define _ASM_SERIAL_H + +#include <linux/kernel.h> + +/* + * This assumes you have a 1.8432 MHz clock for your UART. + * + * It'd be nice if someone built a serial card with a 24.576 MHz + * clock, since the 16550A is capable of handling a top speed of 1.5 + * megabits/second; but this requires the faster clock. + */ +#define BASE_BAUD ( 1843200 / 16 ) + +#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST) + +#ifdef CONFIG_HD64465 +#include <asm/hd64465/hd64465.h> + +#define SERIAL_PORT_DFNS \ + /* UART CLK PORT IRQ FLAGS */ \ + { 0, BASE_BAUD, 0x3F8, HD64465_IRQ_UART, STD_COM_FLAGS } /* ttyS0 */ + +#else + +#define SERIAL_PORT_DFNS + +#endif + +#endif /* _ASM_SERIAL_H */ diff --git a/arch/sh/include/asm/setup.h b/arch/sh/include/asm/setup.h new file mode 100644 index 000000000000..55a2bd328d99 --- /dev/null +++ b/arch/sh/include/asm/setup.h @@ -0,0 +1,27 @@ +#ifndef _SH_SETUP_H +#define _SH_SETUP_H + +#define COMMAND_LINE_SIZE 256 + +#ifdef __KERNEL__ + +/* + * This is set up by the setup-routine at boot-time + */ +#define PARAM ((unsigned char *)empty_zero_page) + +#define MOUNT_ROOT_RDONLY (*(unsigned long *) (PARAM+0x000)) +#define RAMDISK_FLAGS (*(unsigned long *) (PARAM+0x004)) +#define ORIG_ROOT_DEV (*(unsigned long *) (PARAM+0x008)) +#define LOADER_TYPE (*(unsigned long *) (PARAM+0x00c)) +#define INITRD_START (*(unsigned long *) (PARAM+0x010)) +#define INITRD_SIZE (*(unsigned long *) (PARAM+0x014)) +/* ... */ +#define COMMAND_LINE ((char *) (PARAM+0x100)) + +int setup_early_printk(char *); +void sh_mv_setup(void); + +#endif /* __KERNEL__ */ + +#endif /* _SH_SETUP_H */ diff --git a/arch/sh/include/asm/sfp-machine.h b/arch/sh/include/asm/sfp-machine.h new file mode 100644 index 000000000000..d3c548443f2a --- /dev/null +++ b/arch/sh/include/asm/sfp-machine.h @@ -0,0 +1,84 @@ +/* Machine-dependent software floating-point definitions. + SuperH kernel version. + Copyright (C) 1997,1998,1999 Free Software Foundation, Inc. + This file is part of the GNU C Library. + Contributed by Richard Henderson (rth@cygnus.com), + Jakub Jelinek (jj@ultra.linux.cz), + David S. Miller (davem@redhat.com) and + Peter Maydell (pmaydell@chiark.greenend.org.uk). + + The GNU C Library is free software; you can redistribute it and/or + modify it under the terms of the GNU Library General Public License as + published by the Free Software Foundation; either version 2 of the + License, or (at your option) any later version. + + The GNU C Library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Library General Public License for more details. + + You should have received a copy of the GNU Library General Public + License along with the GNU C Library; see the file COPYING.LIB. If + not, write to the Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ + +#ifndef _SFP_MACHINE_H +#define _SFP_MACHINE_H + +#define _FP_W_TYPE_SIZE 32 +#define _FP_W_TYPE unsigned long +#define _FP_WS_TYPE signed long +#define _FP_I_TYPE long + +#define _FP_MUL_MEAT_S(R,X,Y) \ + _FP_MUL_MEAT_1_wide(_FP_WFRACBITS_S,R,X,Y,umul_ppmm) +#define _FP_MUL_MEAT_D(R,X,Y) \ + _FP_MUL_MEAT_2_wide(_FP_WFRACBITS_D,R,X,Y,umul_ppmm) +#define _FP_MUL_MEAT_Q(R,X,Y) \ + _FP_MUL_MEAT_4_wide(_FP_WFRACBITS_Q,R,X,Y,umul_ppmm) + +#define _FP_DIV_MEAT_S(R,X,Y) _FP_DIV_MEAT_1_udiv(S,R,X,Y) +#define _FP_DIV_MEAT_D(R,X,Y) _FP_DIV_MEAT_2_udiv(D,R,X,Y) +#define _FP_DIV_MEAT_Q(R,X,Y) _FP_DIV_MEAT_4_udiv(Q,R,X,Y) + +#define _FP_NANFRAC_S ((_FP_QNANBIT_S << 1) - 1) +#define _FP_NANFRAC_D ((_FP_QNANBIT_D << 1) - 1), -1 +#define _FP_NANFRAC_Q ((_FP_QNANBIT_Q << 1) - 1), -1, -1, -1 +#define _FP_NANSIGN_S 0 +#define _FP_NANSIGN_D 0 +#define _FP_NANSIGN_Q 0 + +#define _FP_KEEPNANFRACP 1 + +/* + * If one NaN is signaling and the other is not, + * we choose that one, otherwise we choose X. + */ +#define _FP_CHOOSENAN(fs, wc, R, X, Y, OP) \ + do { \ + if ((_FP_FRAC_HIGH_RAW_##fs(X) & _FP_QNANBIT_##fs) \ + && !(_FP_FRAC_HIGH_RAW_##fs(Y) & _FP_QNANBIT_##fs)) \ + { \ + R##_s = Y##_s; \ + _FP_FRAC_COPY_##wc(R,Y); \ + } \ + else \ + { \ + R##_s = X##_s; \ + _FP_FRAC_COPY_##wc(R,X); \ + } \ + R##_c = FP_CLS_NAN; \ + } while (0) + +//#define FP_ROUNDMODE FPSCR_RM +#define FP_DENORM_ZERO 1/*FPSCR_DN*/ + +/* Exception flags. */ +#define FP_EX_INVALID (1<<4) +#define FP_EX_DIVZERO (1<<3) +#define FP_EX_OVERFLOW (1<<2) +#define FP_EX_UNDERFLOW (1<<1) +#define FP_EX_INEXACT (1<<0) + +#endif + diff --git a/arch/sh/include/asm/sh7760fb.h b/arch/sh/include/asm/sh7760fb.h new file mode 100644 index 000000000000..8767f61aceca --- /dev/null +++ b/arch/sh/include/asm/sh7760fb.h @@ -0,0 +1,197 @@ +/* + * sh7760fb.h -- platform data for SH7760/SH7763 LCDC framebuffer driver. + * + * (c) 2006-2008 MSC Vertriebsges.m.b.H., + * Manuel Lauss <mano@roarinelk.homelinux.net> + * (c) 2008 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> + */ + +#ifndef _ASM_SH_SH7760FB_H +#define _ASM_SH_SH7760FB_H + +/* + * some bits of the colormap registers should be written as zero. + * create a mask for that. + */ +#define SH7760FB_PALETTE_MASK 0x00f8fcf8 + +/* The LCDC dma engine always sets bits 27-26 to 1: this is Area3 */ +#define SH7760FB_DMA_MASK 0x0C000000 + +/* palette */ +#define LDPR(x) (((x) << 2)) + +/* framebuffer registers and bits */ +#define LDICKR 0x400 +#define LDMTR 0x402 +/* see sh7760fb.h for LDMTR bits */ +#define LDDFR 0x404 +#define LDDFR_PABD (1 << 8) +#define LDDFR_COLOR_MASK 0x7F +#define LDSMR 0x406 +#define LDSMR_ROT (1 << 13) +#define LDSARU 0x408 +#define LDSARL 0x40c +#define LDLAOR 0x410 +#define LDPALCR 0x412 +#define LDPALCR_PALS (1 << 4) +#define LDPALCR_PALEN (1 << 0) +#define LDHCNR 0x414 +#define LDHSYNR 0x416 +#define LDVDLNR 0x418 +#define LDVTLNR 0x41a +#define LDVSYNR 0x41c +#define LDACLNR 0x41e +#define LDINTR 0x420 +#define LDPMMR 0x424 +#define LDPSPR 0x426 +#define LDCNTR 0x428 +#define LDCNTR_DON (1 << 0) +#define LDCNTR_DON2 (1 << 4) + +#ifdef CONFIG_CPU_SUBTYPE_SH7763 +# define LDLIRNR 0x440 +/* LDINTR bit */ +# define LDINTR_MINTEN (1 << 15) +# define LDINTR_FINTEN (1 << 14) +# define LDINTR_VSINTEN (1 << 13) +# define LDINTR_VEINTEN (1 << 12) +# define LDINTR_MINTS (1 << 11) +# define LDINTR_FINTS (1 << 10) +# define LDINTR_VSINTS (1 << 9) +# define LDINTR_VEINTS (1 << 8) +# define VINT_START (LDINTR_VSINTEN) +# define VINT_CHECK (LDINTR_VSINTS) +#else +/* LDINTR bit */ +# define LDINTR_VINTSEL (1 << 12) +# define LDINTR_VINTE (1 << 8) +# define LDINTR_VINTS (1 << 0) +# define VINT_START (LDINTR_VINTSEL) +# define VINT_CHECK (LDINTR_VINTS) +#endif + +/* HSYNC polarity inversion */ +#define LDMTR_FLMPOL (1 << 15) + +/* VSYNC polarity inversion */ +#define LDMTR_CL1POL (1 << 14) + +/* DISPLAY-ENABLE polarity inversion */ +#define LDMTR_DISPEN_LOWACT (1 << 13) + +/* DISPLAY DATA BUS polarity inversion */ +#define LDMTR_DPOL_LOWACT (1 << 12) + +/* AC modulation signal enable */ +#define LDMTR_MCNT (1 << 10) + +/* Disable output of HSYNC during VSYNC period */ +#define LDMTR_CL1CNT (1 << 9) + +/* Disable output of VSYNC during VSYNC period */ +#define LDMTR_CL2CNT (1 << 8) + +/* Display types supported by the LCDC */ +#define LDMTR_STN_MONO_4 0x00 +#define LDMTR_STN_MONO_8 0x01 +#define LDMTR_STN_COLOR_4 0x08 +#define LDMTR_STN_COLOR_8 0x09 +#define LDMTR_STN_COLOR_12 0x0A +#define LDMTR_STN_COLOR_16 0x0B +#define LDMTR_DSTN_MONO_8 0x11 +#define LDMTR_DSTN_MONO_16 0x13 +#define LDMTR_DSTN_COLOR_8 0x19 +#define LDMTR_DSTN_COLOR_12 0x1A +#define LDMTR_DSTN_COLOR_16 0x1B +#define LDMTR_TFT_COLOR_16 0x2B + +/* framebuffer color layout */ +#define LDDFR_1BPP_MONO 0x00 +#define LDDFR_2BPP_MONO 0x01 +#define LDDFR_4BPP_MONO 0x02 +#define LDDFR_6BPP_MONO 0x04 +#define LDDFR_4BPP 0x0A +#define LDDFR_8BPP 0x0C +#define LDDFR_16BPP_RGB555 0x1D +#define LDDFR_16BPP_RGB565 0x2D + +/* LCDC Pixclock sources */ +#define LCDC_CLKSRC_BUSCLOCK 0 +#define LCDC_CLKSRC_PERIPHERAL 1 +#define LCDC_CLKSRC_EXTERNAL 2 + +#define LDICKR_CLKSRC(x) \ + (((x) & 3) << 12) + +/* LCDC pixclock input divider. Set to 1 at a minimum! */ +#define LDICKR_CLKDIV(x) \ + ((x) & 0x1f) + +struct sh7760fb_platdata { + + /* Set this member to a valid fb_videmode for the display you + * wish to use. The following members must be initialized: + * xres, yres, hsync_len, vsync_len, sync, + * {left,right,upper,lower}_margin. + * The driver uses the above members to calculate register values + * and memory requirements. Other members are ignored but may + * be used by other framebuffer layer components. + */ + struct fb_videomode *def_mode; + + /* LDMTR includes display type and signal polarity. The + * HSYNC/VSYNC polarities are derived from the fb_var_screeninfo + * data above; however the polarities of the following signals + * must be encoded in the ldmtr member: + * Display Enable signal (default high-active) DISPEN_LOWACT + * Display Data signals (default high-active) DPOL_LOWACT + * AC Modulation signal (default off) MCNT + * Hsync-During-Vsync suppression (default off) CL1CNT + * Vsync-during-vsync suppression (default off) CL2CNT + * NOTE: also set a display type! + * (one of LDMTR_{STN,DSTN,TFT}_{MONO,COLOR}_{4,8,12,16}) + */ + u16 ldmtr; + + /* LDDFR controls framebuffer image format (depth, organization) + * Use ONE of the LDDFR_?BPP_* macros! + */ + u16 lddfr; + + /* LDPMMR and LDPSPR control the timing of the power signals + * for the display. Please read the SH7760 Hardware Manual, + * Chapters 30.3.17, 30.3.18 and 30.4.6! + */ + u16 ldpmmr; + u16 ldpspr; + + /* LDACLNR contains the line numbers after which the AC modulation + * signal is to toggle. Set to ZERO for TFTs or displays which + * do not need it. (Chapter 30.3.15 in SH7760 Hardware Manual). + */ + u16 ldaclnr; + + /* LDICKR contains information on pixelclock source and config. + * Please use the LDICKR_CLKSRC() and LDICKR_CLKDIV() macros. + * minimal value for CLKDIV() must be 1!. + */ + u16 ldickr; + + /* set this member to 1 if you wish to use the LCDC's hardware + * rotation function. This is limited to displays <= 320x200 + * pixels resolution! + */ + int rotate; /* set to 1 to rotate 90 CCW */ + + /* set this to 1 to suppress vsync irq use. */ + int novsync; + + /* blanking hook for platform. Set this if your platform can do + * more than the LCDC in terms of blanking (e.g. disable clock + * generator / backlight power supply / etc. + */ + void (*blank) (int); +}; + +#endif /* _ASM_SH_SH7760FB_H */ diff --git a/arch/sh/include/asm/sh7763rdp.h b/arch/sh/include/asm/sh7763rdp.h new file mode 100644 index 000000000000..8750cc852977 --- /dev/null +++ b/arch/sh/include/asm/sh7763rdp.h @@ -0,0 +1,54 @@ +#ifndef __ASM_SH_SH7763RDP_H +#define __ASM_SH_SH7763RDP_H + +/* + * linux/include/asm-sh/sh7763drp.h + * + * Copyright (C) 2008 Renesas Solutions + * Copyright (C) 2008 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + */ +#include <asm/addrspace.h> + +/* clock control */ +#define MSTPCR1 0xFFC80038 + +/* PORT */ +#define PORT_PSEL0 0xFFEF0070 +#define PORT_PSEL1 0xFFEF0072 +#define PORT_PSEL2 0xFFEF0074 +#define PORT_PSEL3 0xFFEF0076 +#define PORT_PSEL4 0xFFEF0078 + +#define PORT_PACR 0xFFEF0000 +#define PORT_PCCR 0xFFEF0004 +#define PORT_PFCR 0xFFEF000A +#define PORT_PGCR 0xFFEF000C +#define PORT_PHCR 0xFFEF000E +#define PORT_PICR 0xFFEF0010 +#define PORT_PJCR 0xFFEF0012 +#define PORT_PKCR 0xFFEF0014 +#define PORT_PLCR 0xFFEF0016 +#define PORT_PMCR 0xFFEF0018 +#define PORT_PNCR 0xFFEF001A + +/* FPGA */ +#define CPLD_BOARD_ID_ERV_REG 0xB1000000 +#define CPLD_CPLD_CMD_REG 0xB1000006 + +/* + * USB SH7763RDP board can use Host only. + */ +#define USB_USBHSC 0xFFEC80f0 + +/* arch/sh/boards/renesas/sh7763rdp/irq.c */ +void init_sh7763rdp_IRQ(void); +int sh7763rdp_irq_demux(int irq); +#define __IO_PREFIX sh7763rdp +#include <asm/io_generic.h> + +#endif /* __ASM_SH_SH7763RDP_H */ diff --git a/arch/sh/include/asm/sh7785lcr.h b/arch/sh/include/asm/sh7785lcr.h new file mode 100644 index 000000000000..1ce27d5c7491 --- /dev/null +++ b/arch/sh/include/asm/sh7785lcr.h @@ -0,0 +1,55 @@ +#ifndef __ASM_SH_RENESAS_SH7785LCR_H +#define __ASM_SH_RENESAS_SH7785LCR_H + +/* + * This board has 2 physical memory maps. + * It can be changed with DIP switch(S2-5). + * + * phys address | S2-5 = OFF | S2-5 = ON + * -----------------------------+---------------+--------------- + * 0x00000000 - 0x03ffffff(CS0) | NOR Flash | NOR Flash + * 0x04000000 - 0x05ffffff(CS1) | PLD | PLD + * 0x06000000 - 0x07ffffff(CS1) | reserved | I2C + * 0x08000000 - 0x0bffffff(CS2) | USB | DDR SDRAM + * 0x0c000000 - 0x0fffffff(CS3) | SD | DDR SDRAM + * 0x10000000 - 0x13ffffff(CS4) | SM107 | SM107 + * 0x14000000 - 0x17ffffff(CS5) | I2C | USB + * 0x18000000 - 0x1bffffff(CS6) | reserved | SD + * 0x40000000 - 0x5fffffff | DDR SDRAM | (cannot use) + * + */ + +#define NOR_FLASH_ADDR 0x00000000 +#define NOR_FLASH_SIZE 0x04000000 + +#define PLD_BASE_ADDR 0x04000000 +#define PLD_PCICR (PLD_BASE_ADDR + 0x00) +#define PLD_LCD_BK_CONTR (PLD_BASE_ADDR + 0x02) +#define PLD_LOCALCR (PLD_BASE_ADDR + 0x04) +#define PLD_POFCR (PLD_BASE_ADDR + 0x06) +#define PLD_LEDCR (PLD_BASE_ADDR + 0x08) +#define PLD_SWSR (PLD_BASE_ADDR + 0x0a) +#define PLD_VERSR (PLD_BASE_ADDR + 0x0c) +#define PLD_MMSR (PLD_BASE_ADDR + 0x0e) + +#define SM107_MEM_ADDR 0x10000000 +#define SM107_MEM_SIZE 0x00e00000 +#define SM107_REG_ADDR 0x13e00000 +#define SM107_REG_SIZE 0x00200000 + +#if defined(CONFIG_SH_SH7785LCR_29BIT_PHYSMAPS) +#define R8A66597_ADDR 0x14000000 /* USB */ +#define CG200_ADDR 0x18000000 /* SD */ +#define PCA9564_ADDR 0x06000000 /* I2C */ +#else +#define R8A66597_ADDR 0x08000000 +#define CG200_ADDR 0x0c000000 +#define PCA9564_ADDR 0x14000000 +#endif + +#define R8A66597_SIZE 0x00000100 +#define CG200_SIZE 0x00010000 +#define PCA9564_SIZE 0x00000100 + +#endif /* __ASM_SH_RENESAS_SH7785LCR_H */ + diff --git a/arch/sh/include/asm/sh_bios.h b/arch/sh/include/asm/sh_bios.h new file mode 100644 index 000000000000..0ca261956e3d --- /dev/null +++ b/arch/sh/include/asm/sh_bios.h @@ -0,0 +1,19 @@ +#ifndef __ASM_SH_BIOS_H +#define __ASM_SH_BIOS_H + +/* + * Copyright (C) 2000 Greg Banks, Mitch Davis + * C API to interface to the standard LinuxSH BIOS + * usually from within the early stages of kernel boot. + */ + + +extern void sh_bios_console_write(const char *buf, unsigned int len); +extern void sh_bios_char_out(char ch); +extern int sh_bios_in_gdb_mode(void); +extern void sh_bios_gdb_detach(void); + +extern void sh_bios_get_node_addr(unsigned char *node_addr); +extern void sh_bios_shutdown(unsigned int how); + +#endif /* __ASM_SH_BIOS_H */ diff --git a/arch/sh/include/asm/sh_keysc.h b/arch/sh/include/asm/sh_keysc.h new file mode 100644 index 000000000000..b5a4dd5a9729 --- /dev/null +++ b/arch/sh/include/asm/sh_keysc.h @@ -0,0 +1,13 @@ +#ifndef __ASM_KEYSC_H__ +#define __ASM_KEYSC_H__ + +#define SH_KEYSC_MAXKEYS 30 + +struct sh_keysc_info { + enum { SH_KEYSC_MODE_1, SH_KEYSC_MODE_2, SH_KEYSC_MODE_3 } mode; + int scan_timing; /* 0 -> 7, see KYCR1, SCN[2:0] */ + int delay; + int keycodes[SH_KEYSC_MAXKEYS]; +}; + +#endif /* __ASM_KEYSC_H__ */ diff --git a/arch/sh/include/asm/sh_mobile_lcdc.h b/arch/sh/include/asm/sh_mobile_lcdc.h new file mode 100644 index 000000000000..27677727df4d --- /dev/null +++ b/arch/sh/include/asm/sh_mobile_lcdc.h @@ -0,0 +1,66 @@ +#ifndef __ASM_SH_MOBILE_LCDC_H__ +#define __ASM_SH_MOBILE_LCDC_H__ + +#include <linux/fb.h> + +enum { RGB8, /* 24bpp, 8:8:8 */ + RGB9, /* 18bpp, 9:9 */ + RGB12A, /* 24bpp, 12:12 */ + RGB12B, /* 12bpp */ + RGB16, /* 16bpp */ + RGB18, /* 18bpp */ + RGB24, /* 24bpp */ + SYS8A, /* 24bpp, 8:8:8 */ + SYS8B, /* 18bpp, 8:8:2 */ + SYS8C, /* 18bpp, 2:8:8 */ + SYS8D, /* 16bpp, 8:8 */ + SYS9, /* 18bpp, 9:9 */ + SYS12, /* 24bpp, 12:12 */ + SYS16A, /* 16bpp */ + SYS16B, /* 18bpp, 16:2 */ + SYS16C, /* 18bpp, 2:16 */ + SYS18, /* 18bpp */ + SYS24 };/* 24bpp */ + +enum { LCDC_CHAN_DISABLED = 0, + LCDC_CHAN_MAINLCD, + LCDC_CHAN_SUBLCD }; + +enum { LCDC_CLK_BUS, LCDC_CLK_PERIPHERAL, LCDC_CLK_EXTERNAL }; + +struct sh_mobile_lcdc_sys_bus_cfg { + unsigned long ldmt2r; + unsigned long ldmt3r; +}; + +struct sh_mobile_lcdc_sys_bus_ops { + void (*write_index)(void *handle, unsigned long data); + void (*write_data)(void *handle, unsigned long data); + unsigned long (*read_data)(void *handle); +}; + +struct sh_mobile_lcdc_board_cfg { + void *board_data; + int (*setup_sys)(void *board_data, void *sys_ops_handle, + struct sh_mobile_lcdc_sys_bus_ops *sys_ops); + void (*display_on)(void *board_data); + void (*display_off)(void *board_data); +}; + +struct sh_mobile_lcdc_chan_cfg { + int chan; + int bpp; + int interface_type; /* selects RGBn or SYSn I/F, see above */ + int clock_divider; + struct fb_videomode lcd_cfg; + struct sh_mobile_lcdc_board_cfg board_cfg; + struct sh_mobile_lcdc_sys_bus_cfg sys_bus_cfg; /* only for SYSn I/F */ +}; + +struct sh_mobile_lcdc_info { + unsigned long lddckr; + int clock_source; + struct sh_mobile_lcdc_chan_cfg ch[2]; +}; + +#endif /* __ASM_SH_MOBILE_LCDC_H__ */ diff --git a/arch/sh/include/asm/shmbuf.h b/arch/sh/include/asm/shmbuf.h new file mode 100644 index 000000000000..b2101f490521 --- /dev/null +++ b/arch/sh/include/asm/shmbuf.h @@ -0,0 +1,42 @@ +#ifndef __ASM_SH_SHMBUF_H +#define __ASM_SH_SHMBUF_H + +/* + * The shmid64_ds structure for i386 architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 64-bit time_t to solve y2038 problem + * - 2 miscellaneous 32-bit values + */ + +struct shmid64_ds { + struct ipc64_perm shm_perm; /* operation perms */ + size_t shm_segsz; /* size of segment (bytes) */ + __kernel_time_t shm_atime; /* last attach time */ + unsigned long __unused1; + __kernel_time_t shm_dtime; /* last detach time */ + unsigned long __unused2; + __kernel_time_t shm_ctime; /* last change time */ + unsigned long __unused3; + __kernel_pid_t shm_cpid; /* pid of creator */ + __kernel_pid_t shm_lpid; /* pid of last operator */ + unsigned long shm_nattch; /* no. of current attaches */ + unsigned long __unused4; + unsigned long __unused5; +}; + +struct shminfo64 { + unsigned long shmmax; + unsigned long shmmin; + unsigned long shmmni; + unsigned long shmseg; + unsigned long shmall; + unsigned long __unused1; + unsigned long __unused2; + unsigned long __unused3; + unsigned long __unused4; +}; + +#endif /* __ASM_SH_SHMBUF_H */ diff --git a/arch/sh/include/asm/shmin.h b/arch/sh/include/asm/shmin.h new file mode 100644 index 000000000000..36ba138a81fb --- /dev/null +++ b/arch/sh/include/asm/shmin.h @@ -0,0 +1,9 @@ +#ifndef __ASM_SH_SHMIN_H +#define __ASM_SH_SHMIN_H + +#define SHMIN_IO_BASE 0xb0000000UL + +#define SHMIN_NE_IRQ IRQ2_IRQ +#define SHMIN_NE_BASE 0x300 + +#endif diff --git a/arch/sh/include/asm/shmparam.h b/arch/sh/include/asm/shmparam.h new file mode 100644 index 000000000000..ba1758d90106 --- /dev/null +++ b/arch/sh/include/asm/shmparam.h @@ -0,0 +1,22 @@ +/* + * include/asm-sh/shmparam.h + * + * Copyright (C) 1999 Niibe Yutaka + * Copyright (C) 2006 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_SH_SHMPARAM_H +#define __ASM_SH_SHMPARAM_H + +/* + * SH-4 and SH-3 7705 have an aliasing dcache. Bump this up to a sensible value + * for everyone, and work out the specifics from the probed cache descriptor. + */ +#define SHMLBA 0x4000 /* attach addr a multiple of this */ + +#define __ARCH_FORCE_SHMLBA + +#endif /* __ASM_SH_SHMPARAM_H */ diff --git a/arch/sh/include/asm/sigcontext.h b/arch/sh/include/asm/sigcontext.h new file mode 100644 index 000000000000..8ce1435bc0bf --- /dev/null +++ b/arch/sh/include/asm/sigcontext.h @@ -0,0 +1,40 @@ +#ifndef __ASM_SH_SIGCONTEXT_H +#define __ASM_SH_SIGCONTEXT_H + +struct sigcontext { + unsigned long oldmask; + +#if defined(__SH5__) || defined(CONFIG_CPU_SH5) + /* CPU registers */ + unsigned long long sc_regs[63]; + unsigned long long sc_tregs[8]; + unsigned long long sc_pc; + unsigned long long sc_sr; + + /* FPU registers */ + unsigned long long sc_fpregs[32]; + unsigned int sc_fpscr; + unsigned int sc_fpvalid; +#else + /* CPU registers */ + unsigned long sc_regs[16]; + unsigned long sc_pc; + unsigned long sc_pr; + unsigned long sc_sr; + unsigned long sc_gbr; + unsigned long sc_mach; + unsigned long sc_macl; + +#if defined(__SH4__) || defined(CONFIG_CPU_SH4) || \ + defined(__SH2A__) || defined(CONFIG_CPU_SH2A) + /* FPU registers */ + unsigned long sc_fpregs[16]; + unsigned long sc_xfpregs[16]; + unsigned int sc_fpscr; + unsigned int sc_fpul; + unsigned int sc_ownedfp; +#endif +#endif +}; + +#endif /* __ASM_SH_SIGCONTEXT_H */ diff --git a/arch/sh/include/asm/siginfo.h b/arch/sh/include/asm/siginfo.h new file mode 100644 index 000000000000..813040ed68a9 --- /dev/null +++ b/arch/sh/include/asm/siginfo.h @@ -0,0 +1,6 @@ +#ifndef __ASM_SH_SIGINFO_H +#define __ASM_SH_SIGINFO_H + +#include <asm-generic/siginfo.h> + +#endif /* __ASM_SH_SIGINFO_H */ diff --git a/arch/sh/include/asm/signal.h b/arch/sh/include/asm/signal.h new file mode 100644 index 000000000000..5c5c1e852089 --- /dev/null +++ b/arch/sh/include/asm/signal.h @@ -0,0 +1,160 @@ +#ifndef __ASM_SH_SIGNAL_H +#define __ASM_SH_SIGNAL_H + +#include <linux/types.h> + +/* Avoid too many header ordering problems. */ +struct pt_regs; +struct siginfo; + +#ifdef __KERNEL__ +/* Most things should be clean enough to redefine this at will, if care + is taken to make libc match. */ + +#define _NSIG 64 +#define _NSIG_BPW 32 +#define _NSIG_WORDS (_NSIG / _NSIG_BPW) + +typedef unsigned long old_sigset_t; /* at least 32 bits */ + +typedef struct { + unsigned long sig[_NSIG_WORDS]; +} sigset_t; + +#else +/* Here we must cater to libcs that poke about in kernel headers. */ + +#define NSIG 32 +typedef unsigned long sigset_t; + +#endif /* __KERNEL__ */ + +#define SIGHUP 1 +#define SIGINT 2 +#define SIGQUIT 3 +#define SIGILL 4 +#define SIGTRAP 5 +#define SIGABRT 6 +#define SIGIOT 6 +#define SIGBUS 7 +#define SIGFPE 8 +#define SIGKILL 9 +#define SIGUSR1 10 +#define SIGSEGV 11 +#define SIGUSR2 12 +#define SIGPIPE 13 +#define SIGALRM 14 +#define SIGTERM 15 +#define SIGSTKFLT 16 +#define SIGCHLD 17 +#define SIGCONT 18 +#define SIGSTOP 19 +#define SIGTSTP 20 +#define SIGTTIN 21 +#define SIGTTOU 22 +#define SIGURG 23 +#define SIGXCPU 24 +#define SIGXFSZ 25 +#define SIGVTALRM 26 +#define SIGPROF 27 +#define SIGWINCH 28 +#define SIGIO 29 +#define SIGPOLL SIGIO +/* +#define SIGLOST 29 +*/ +#define SIGPWR 30 +#define SIGSYS 31 +#define SIGUNUSED 31 + +/* These should not be considered constants from userland. */ +#define SIGRTMIN 32 +#define SIGRTMAX _NSIG + +/* + * SA_FLAGS values: + * + * SA_ONSTACK indicates that a registered stack_t will be used. + * SA_RESTART flag to get restarting signals (which were the default long ago) + * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop. + * SA_RESETHAND clears the handler when the signal is delivered. + * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies. + * SA_NODEFER prevents the current signal from being masked in the handler. + * + * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single + * Unix names RESETHAND and NODEFER respectively. + */ +#define SA_NOCLDSTOP 0x00000001 +#define SA_NOCLDWAIT 0x00000002 +#define SA_SIGINFO 0x00000004 +#define SA_ONSTACK 0x08000000 +#define SA_RESTART 0x10000000 +#define SA_NODEFER 0x40000000 +#define SA_RESETHAND 0x80000000 + +#define SA_NOMASK SA_NODEFER +#define SA_ONESHOT SA_RESETHAND + +#define SA_RESTORER 0x04000000 + +/* + * sigaltstack controls + */ +#define SS_ONSTACK 1 +#define SS_DISABLE 2 + +#define MINSIGSTKSZ 2048 +#define SIGSTKSZ 8192 + +#include <asm-generic/signal.h> + +#ifdef __KERNEL__ +struct old_sigaction { + __sighandler_t sa_handler; + old_sigset_t sa_mask; + unsigned long sa_flags; + void (*sa_restorer)(void); +}; + +struct sigaction { + __sighandler_t sa_handler; + unsigned long sa_flags; + void (*sa_restorer)(void); + sigset_t sa_mask; /* mask last for extensibility */ +}; + +struct k_sigaction { + struct sigaction sa; +}; +#else +/* Here we must cater to libcs that poke about in kernel headers. */ + +struct sigaction { + union { + __sighandler_t _sa_handler; + void (*_sa_sigaction)(int, struct siginfo *, void *); + } _u; + sigset_t sa_mask; + unsigned long sa_flags; + void (*sa_restorer)(void); +}; + +#define sa_handler _u._sa_handler +#define sa_sigaction _u._sa_sigaction + +#endif /* __KERNEL__ */ + +typedef struct sigaltstack { + void *ss_sp; + int ss_flags; + size_t ss_size; +} stack_t; + +#ifdef __KERNEL__ +#include <asm/sigcontext.h> + +#define ptrace_signal_deliver(regs, cookie) do { } while (0) + +#endif /* __KERNEL__ */ + +#endif /* __ASM_SH_SIGNAL_H */ diff --git a/arch/sh/include/asm/smc37c93x.h b/arch/sh/include/asm/smc37c93x.h new file mode 100644 index 000000000000..585da2a8fc45 --- /dev/null +++ b/arch/sh/include/asm/smc37c93x.h @@ -0,0 +1,190 @@ +#ifndef __ASM_SH_SMC37C93X_H +#define __ASM_SH_SMC37C93X_H + +/* + * linux/include/asm-sh/smc37c93x.h + * + * Copyright (C) 2000 Kazumoto Kojima + * + * SMSC 37C93x Super IO Chip support + */ + +/* Default base I/O address */ +#define FDC_PRIMARY_BASE 0x3f0 +#define IDE1_PRIMARY_BASE 0x1f0 +#define IDE1_SECONDARY_BASE 0x170 +#define PARPORT_PRIMARY_BASE 0x378 +#define COM1_PRIMARY_BASE 0x2f8 +#define COM2_PRIMARY_BASE 0x3f8 +#define RTC_PRIMARY_BASE 0x070 +#define KBC_PRIMARY_BASE 0x060 +#define AUXIO_PRIMARY_BASE 0x000 /* XXX */ + +/* Logical device number */ +#define LDN_FDC 0 +#define LDN_IDE1 1 +#define LDN_IDE2 2 +#define LDN_PARPORT 3 +#define LDN_COM1 4 +#define LDN_COM2 5 +#define LDN_RTC 6 +#define LDN_KBC 7 +#define LDN_AUXIO 8 + +/* Configuration port and key */ +#define CONFIG_PORT 0x3f0 +#define INDEX_PORT CONFIG_PORT +#define DATA_PORT 0x3f1 +#define CONFIG_ENTER 0x55 +#define CONFIG_EXIT 0xaa + +/* Configuration index */ +#define CURRENT_LDN_INDEX 0x07 +#define POWER_CONTROL_INDEX 0x22 +#define ACTIVATE_INDEX 0x30 +#define IO_BASE_HI_INDEX 0x60 +#define IO_BASE_LO_INDEX 0x61 +#define IRQ_SELECT_INDEX 0x70 +#define DMA_SELECT_INDEX 0x74 + +#define GPIO46_INDEX 0xc6 +#define GPIO47_INDEX 0xc7 + +/* UART stuff. Only for debugging. */ +/* UART Register */ + +#define UART_RBR 0x0 /* Receiver Buffer Register (Read Only) */ +#define UART_THR 0x0 /* Transmitter Holding Register (Write Only) */ +#define UART_IER 0x2 /* Interrupt Enable Register */ +#define UART_IIR 0x4 /* Interrupt Ident Register (Read Only) */ +#define UART_FCR 0x4 /* FIFO Control Register (Write Only) */ +#define UART_LCR 0x6 /* Line Control Register */ +#define UART_MCR 0x8 /* MODEM Control Register */ +#define UART_LSR 0xa /* Line Status Register */ +#define UART_MSR 0xc /* MODEM Status Register */ +#define UART_SCR 0xe /* Scratch Register */ +#define UART_DLL 0x0 /* Divisor Latch (LS) */ +#define UART_DLM 0x2 /* Divisor Latch (MS) */ + +#ifndef __ASSEMBLY__ +typedef struct uart_reg { + volatile __u16 rbr; + volatile __u16 ier; + volatile __u16 iir; + volatile __u16 lcr; + volatile __u16 mcr; + volatile __u16 lsr; + volatile __u16 msr; + volatile __u16 scr; +} uart_reg; +#endif /* ! __ASSEMBLY__ */ + +/* Alias for Write Only Register */ + +#define thr rbr +#define tcr iir + +/* Alias for Divisor Latch Register */ + +#define dll rbr +#define dlm ier +#define fcr iir + +/* Interrupt Enable Register */ + +#define IER_ERDAI 0x0100 /* Enable Received Data Available Interrupt */ +#define IER_ETHREI 0x0200 /* Enable Transmitter Holding Register Empty Interrupt */ +#define IER_ELSI 0x0400 /* Enable Receiver Line Status Interrupt */ +#define IER_EMSI 0x0800 /* Enable MODEM Status Interrupt */ + +/* Interrupt Ident Register */ + +#define IIR_IP 0x0100 /* "0" if Interrupt Pending */ +#define IIR_IIB0 0x0200 /* Interrupt ID Bit 0 */ +#define IIR_IIB1 0x0400 /* Interrupt ID Bit 1 */ +#define IIR_IIB2 0x0800 /* Interrupt ID Bit 2 */ +#define IIR_FIFO 0xc000 /* FIFOs enabled */ + +/* FIFO Control Register */ + +#define FCR_FEN 0x0100 /* FIFO enable */ +#define FCR_RFRES 0x0200 /* Receiver FIFO reset */ +#define FCR_TFRES 0x0400 /* Transmitter FIFO reset */ +#define FCR_DMA 0x0800 /* DMA mode select */ +#define FCR_RTL 0x4000 /* Receiver triger (LSB) */ +#define FCR_RTM 0x8000 /* Receiver triger (MSB) */ + +/* Line Control Register */ + +#define LCR_WLS0 0x0100 /* Word Length Select Bit 0 */ +#define LCR_WLS1 0x0200 /* Word Length Select Bit 1 */ +#define LCR_STB 0x0400 /* Number of Stop Bits */ +#define LCR_PEN 0x0800 /* Parity Enable */ +#define LCR_EPS 0x1000 /* Even Parity Select */ +#define LCR_SP 0x2000 /* Stick Parity */ +#define LCR_SB 0x4000 /* Set Break */ +#define LCR_DLAB 0x8000 /* Divisor Latch Access Bit */ + +/* MODEM Control Register */ + +#define MCR_DTR 0x0100 /* Data Terminal Ready */ +#define MCR_RTS 0x0200 /* Request to Send */ +#define MCR_OUT1 0x0400 /* Out 1 */ +#define MCR_IRQEN 0x0800 /* IRQ Enable */ +#define MCR_LOOP 0x1000 /* Loop */ + +/* Line Status Register */ + +#define LSR_DR 0x0100 /* Data Ready */ +#define LSR_OE 0x0200 /* Overrun Error */ +#define LSR_PE 0x0400 /* Parity Error */ +#define LSR_FE 0x0800 /* Framing Error */ +#define LSR_BI 0x1000 /* Break Interrupt */ +#define LSR_THRE 0x2000 /* Transmitter Holding Register Empty */ +#define LSR_TEMT 0x4000 /* Transmitter Empty */ +#define LSR_FIFOE 0x8000 /* Receiver FIFO error */ + +/* MODEM Status Register */ + +#define MSR_DCTS 0x0100 /* Delta Clear to Send */ +#define MSR_DDSR 0x0200 /* Delta Data Set Ready */ +#define MSR_TERI 0x0400 /* Trailing Edge Ring Indicator */ +#define MSR_DDCD 0x0800 /* Delta Data Carrier Detect */ +#define MSR_CTS 0x1000 /* Clear to Send */ +#define MSR_DSR 0x2000 /* Data Set Ready */ +#define MSR_RI 0x4000 /* Ring Indicator */ +#define MSR_DCD 0x8000 /* Data Carrier Detect */ + +/* Baud Rate Divisor */ + +#define UART_CLK (1843200) /* 1.8432 MHz */ +#define UART_BAUD(x) (UART_CLK / (16 * (x))) + +/* RTC register definition */ +#define RTC_SECONDS 0 +#define RTC_SECONDS_ALARM 1 +#define RTC_MINUTES 2 +#define RTC_MINUTES_ALARM 3 +#define RTC_HOURS 4 +#define RTC_HOURS_ALARM 5 +#define RTC_DAY_OF_WEEK 6 +#define RTC_DAY_OF_MONTH 7 +#define RTC_MONTH 8 +#define RTC_YEAR 9 +#define RTC_FREQ_SELECT 10 +# define RTC_UIP 0x80 +# define RTC_DIV_CTL 0x70 +/* This RTC can work under 32.768KHz clock only. */ +# define RTC_OSC_ENABLE 0x20 +# define RTC_OSC_DISABLE 0x00 +#define RTC_CONTROL 11 +# define RTC_SET 0x80 +# define RTC_PIE 0x40 +# define RTC_AIE 0x20 +# define RTC_UIE 0x10 +# define RTC_SQWE 0x08 +# define RTC_DM_BINARY 0x04 +# define RTC_24H 0x02 +# define RTC_DST_EN 0x01 + +#endif /* __ASM_SH_SMC37C93X_H */ diff --git a/arch/sh/include/asm/smp.h b/arch/sh/include/asm/smp.h new file mode 100644 index 000000000000..593343cd26ee --- /dev/null +++ b/arch/sh/include/asm/smp.h @@ -0,0 +1,50 @@ +#ifndef __ASM_SH_SMP_H +#define __ASM_SH_SMP_H + +#include <linux/bitops.h> +#include <linux/cpumask.h> + +#ifdef CONFIG_SMP + +#include <linux/spinlock.h> +#include <asm/atomic.h> +#include <asm/current.h> + +#define raw_smp_processor_id() (current_thread_info()->cpu) +#define hard_smp_processor_id() plat_smp_processor_id() + +/* Map from cpu id to sequential logical cpu number. */ +extern int __cpu_number_map[NR_CPUS]; +#define cpu_number_map(cpu) __cpu_number_map[cpu] + +/* The reverse map from sequential logical cpu number to cpu id. */ +extern int __cpu_logical_map[NR_CPUS]; +#define cpu_logical_map(cpu) __cpu_logical_map[cpu] + +/* I've no idea what the real meaning of this is */ +#define PROC_CHANGE_PENALTY 20 + +#define NO_PROC_ID (-1) + +#define SMP_MSG_FUNCTION 0 +#define SMP_MSG_RESCHEDULE 1 +#define SMP_MSG_FUNCTION_SINGLE 2 +#define SMP_MSG_NR 3 + +void plat_smp_setup(void); +void plat_prepare_cpus(unsigned int max_cpus); +int plat_smp_processor_id(void); +void plat_start_cpu(unsigned int cpu, unsigned long entry_point); +void plat_send_ipi(unsigned int cpu, unsigned int message); +int plat_register_ipi_handler(unsigned int message, + void (*handler)(void *), void *arg); +extern void arch_send_call_function_single_ipi(int cpu); +extern void arch_send_call_function_ipi(cpumask_t mask); + +#else + +#define hard_smp_processor_id() (0) + +#endif /* CONFIG_SMP */ + +#endif /* __ASM_SH_SMP_H */ diff --git a/arch/sh/include/asm/snapgear.h b/arch/sh/include/asm/snapgear.h new file mode 100644 index 000000000000..042d95f51c4d --- /dev/null +++ b/arch/sh/include/asm/snapgear.h @@ -0,0 +1,71 @@ +/* + * include/asm-sh/snapgear.h + * + * Modified version of io_se.h for the snapgear-specific functions. + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + * + * IO functions for a SnapGear + */ + +#ifndef _ASM_SH_IO_SNAPGEAR_H +#define _ASM_SH_IO_SNAPGEAR_H + +#if defined(CONFIG_CPU_SH4) +/* + * The external interrupt lines, these take up ints 0 - 15 inclusive + * depending on the priority for the interrupt. In fact the priority + * is the interrupt :-) + */ + +#define IRL0_IRQ 2 +#define IRL0_PRIORITY 13 + +#define IRL1_IRQ 5 +#define IRL1_PRIORITY 10 + +#define IRL2_IRQ 8 +#define IRL2_PRIORITY 7 + +#define IRL3_IRQ 11 +#define IRL3_PRIORITY 4 +#endif + +#define __IO_PREFIX snapgear +#include <asm/io_generic.h> + +#ifdef CONFIG_SH_SECUREEDGE5410 +/* + * We need to remember what was written to the ioport as some bits + * are shared with other functions and you cannot read back what was + * written :-| + * + * Bit Read Write + * ----------------------------------------------- + * D0 DCD on ttySC1 power + * D1 Reset Switch heatbeat + * D2 ttySC0 CTS (7100) LAN + * D3 - WAN + * D4 ttySC0 DCD (7100) CONSOLE + * D5 - ONLINE + * D6 - VPN + * D7 - DTR on ttySC1 + * D8 - ttySC0 RTS (7100) + * D9 - ttySC0 DTR (7100) + * D10 - RTC SCLK + * D11 RTC DATA RTC DATA + * D12 - RTS RESET + */ + +#define SECUREEDGE_IOPORT_ADDR ((volatile short *) 0xb0000000) +extern unsigned short secureedge5410_ioport; + +#define SECUREEDGE_WRITE_IOPORT(val, mask) (*SECUREEDGE_IOPORT_ADDR = \ + (secureedge5410_ioport = \ + ((secureedge5410_ioport & ~(mask)) | ((val) & (mask))))) +#define SECUREEDGE_READ_IOPORT() \ + ((*SECUREEDGE_IOPORT_ADDR&0x0817) | (secureedge5410_ioport&~0x0817)) +#endif + +#endif /* _ASM_SH_IO_SNAPGEAR_H */ diff --git a/arch/sh/include/asm/socket.h b/arch/sh/include/asm/socket.h new file mode 100644 index 000000000000..6d4bf6512959 --- /dev/null +++ b/arch/sh/include/asm/socket.h @@ -0,0 +1,57 @@ +#ifndef __ASM_SH_SOCKET_H +#define __ASM_SH_SOCKET_H + +#include <asm/sockios.h> + +/* For setsockopt(2) */ +#define SOL_SOCKET 1 + +#define SO_DEBUG 1 +#define SO_REUSEADDR 2 +#define SO_TYPE 3 +#define SO_ERROR 4 +#define SO_DONTROUTE 5 +#define SO_BROADCAST 6 +#define SO_SNDBUF 7 +#define SO_RCVBUF 8 +#define SO_RCVBUFFORCE 32 +#define SO_SNDBUFFORCE 33 +#define SO_KEEPALIVE 9 +#define SO_OOBINLINE 10 +#define SO_NO_CHECK 11 +#define SO_PRIORITY 12 +#define SO_LINGER 13 +#define SO_BSDCOMPAT 14 +/* To add :#define SO_REUSEPORT 15 */ +#define SO_PASSCRED 16 +#define SO_PEERCRED 17 +#define SO_RCVLOWAT 18 +#define SO_SNDLOWAT 19 +#define SO_RCVTIMEO 20 +#define SO_SNDTIMEO 21 + +/* Security levels - as per NRL IPv6 - don't actually do anything */ +#define SO_SECURITY_AUTHENTICATION 22 +#define SO_SECURITY_ENCRYPTION_TRANSPORT 23 +#define SO_SECURITY_ENCRYPTION_NETWORK 24 + +#define SO_BINDTODEVICE 25 + +/* Socket filtering */ +#define SO_ATTACH_FILTER 26 +#define SO_DETACH_FILTER 27 + +#define SO_PEERNAME 28 +#define SO_TIMESTAMP 29 +#define SCM_TIMESTAMP SO_TIMESTAMP + +#define SO_ACCEPTCONN 30 + +#define SO_PEERSEC 31 +#define SO_PASSSEC 34 +#define SO_TIMESTAMPNS 35 +#define SCM_TIMESTAMPNS SO_TIMESTAMPNS + +#define SO_MARK 36 + +#endif /* __ASM_SH_SOCKET_H */ diff --git a/arch/sh/include/asm/sockios.h b/arch/sh/include/asm/sockios.h new file mode 100644 index 000000000000..cf8b96b1f9ab --- /dev/null +++ b/arch/sh/include/asm/sockios.h @@ -0,0 +1,14 @@ +#ifndef __ASM_SH_SOCKIOS_H +#define __ASM_SH_SOCKIOS_H + +/* Socket-level I/O control calls. */ +#define FIOGETOWN _IOR('f', 123, int) +#define FIOSETOWN _IOW('f', 124, int) + +#define SIOCATMARK _IOR('s', 7, int) +#define SIOCSPGRP _IOW('s', 8, pid_t) +#define SIOCGPGRP _IOR('s', 9, pid_t) + +#define SIOCGSTAMP _IOR('s', 100, struct timeval) /* Get stamp (timeval) */ +#define SIOCGSTAMPNS _IOR('s', 101, struct timespec) /* Get stamp (timespec) */ +#endif /* __ASM_SH_SOCKIOS_H */ diff --git a/arch/sh/include/asm/sparsemem.h b/arch/sh/include/asm/sparsemem.h new file mode 100644 index 000000000000..547a540b6667 --- /dev/null +++ b/arch/sh/include/asm/sparsemem.h @@ -0,0 +1,16 @@ +#ifndef __ASM_SH_SPARSEMEM_H +#define __ASM_SH_SPARSEMEM_H + +#ifdef __KERNEL__ +/* + * SECTION_SIZE_BITS 2^N: how big each section will be + * MAX_PHYSADDR_BITS 2^N: how much physical address space we have + * MAX_PHYSMEM_BITS 2^N: how much memory we can have in that space + */ +#define SECTION_SIZE_BITS 26 +#define MAX_PHYSADDR_BITS 32 +#define MAX_PHYSMEM_BITS 32 + +#endif + +#endif /* __ASM_SH_SPARSEMEM_H */ diff --git a/arch/sh/include/asm/spi.h b/arch/sh/include/asm/spi.h new file mode 100644 index 000000000000..e96f5b0953c8 --- /dev/null +++ b/arch/sh/include/asm/spi.h @@ -0,0 +1,13 @@ +#ifndef __ASM_SPI_H__ +#define __ASM_SPI_H__ + +struct sh_spi_info; + +struct sh_spi_info { + int bus_num; + int num_chipselect; + + void (*chip_select)(struct sh_spi_info *spi, int cs, int state); +}; + +#endif /* __ASM_SPI_H__ */ diff --git a/arch/sh/include/asm/spinlock.h b/arch/sh/include/asm/spinlock.h new file mode 100644 index 000000000000..e793181d64da --- /dev/null +++ b/arch/sh/include/asm/spinlock.h @@ -0,0 +1,223 @@ +/* + * include/asm-sh/spinlock.h + * + * Copyright (C) 2002, 2003 Paul Mundt + * Copyright (C) 2006, 2007 Akio Idehara + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_SH_SPINLOCK_H +#define __ASM_SH_SPINLOCK_H + +/* + * The only locking implemented here uses SH-4A opcodes. For others, + * split this out as per atomic-*.h. + */ +#ifndef CONFIG_CPU_SH4A +#error "Need movli.l/movco.l for spinlocks" +#endif + +/* + * Your basic SMP spinlocks, allowing only a single CPU anywhere + */ + +#define __raw_spin_is_locked(x) ((x)->lock <= 0) +#define __raw_spin_lock_flags(lock, flags) __raw_spin_lock(lock) +#define __raw_spin_unlock_wait(x) \ + do { cpu_relax(); } while ((x)->lock) + +/* + * Simple spin lock operations. There are two variants, one clears IRQ's + * on the local processor, one does not. + * + * We make no fairness assumptions. They have a cost. + */ +static inline void __raw_spin_lock(raw_spinlock_t *lock) +{ + unsigned long tmp; + unsigned long oldval; + + __asm__ __volatile__ ( + "1: \n\t" + "movli.l @%2, %0 ! __raw_spin_lock \n\t" + "mov %0, %1 \n\t" + "mov #0, %0 \n\t" + "movco.l %0, @%2 \n\t" + "bf 1b \n\t" + "cmp/pl %1 \n\t" + "bf 1b \n\t" + : "=&z" (tmp), "=&r" (oldval) + : "r" (&lock->lock) + : "t", "memory" + ); +} + +static inline void __raw_spin_unlock(raw_spinlock_t *lock) +{ + unsigned long tmp; + + __asm__ __volatile__ ( + "mov #1, %0 ! __raw_spin_unlock \n\t" + "mov.l %0, @%1 \n\t" + : "=&z" (tmp) + : "r" (&lock->lock) + : "t", "memory" + ); +} + +static inline int __raw_spin_trylock(raw_spinlock_t *lock) +{ + unsigned long tmp, oldval; + + __asm__ __volatile__ ( + "1: \n\t" + "movli.l @%2, %0 ! __raw_spin_trylock \n\t" + "mov %0, %1 \n\t" + "mov #0, %0 \n\t" + "movco.l %0, @%2 \n\t" + "bf 1b \n\t" + "synco \n\t" + : "=&z" (tmp), "=&r" (oldval) + : "r" (&lock->lock) + : "t", "memory" + ); + + return oldval; +} + +/* + * Read-write spinlocks, allowing multiple readers but only one writer. + * + * NOTE! it is quite common to have readers in interrupts but no interrupt + * writers. For those circumstances we can "mix" irq-safe locks - any writer + * needs to get a irq-safe write-lock, but readers can get non-irqsafe + * read-locks. + */ + +/** + * read_can_lock - would read_trylock() succeed? + * @lock: the rwlock in question. + */ +#define __raw_read_can_lock(x) ((x)->lock > 0) + +/** + * write_can_lock - would write_trylock() succeed? + * @lock: the rwlock in question. + */ +#define __raw_write_can_lock(x) ((x)->lock == RW_LOCK_BIAS) + +static inline void __raw_read_lock(raw_rwlock_t *rw) +{ + unsigned long tmp; + + __asm__ __volatile__ ( + "1: \n\t" + "movli.l @%1, %0 ! __raw_read_lock \n\t" + "cmp/pl %0 \n\t" + "bf 1b \n\t" + "add #-1, %0 \n\t" + "movco.l %0, @%1 \n\t" + "bf 1b \n\t" + : "=&z" (tmp) + : "r" (&rw->lock) + : "t", "memory" + ); +} + +static inline void __raw_read_unlock(raw_rwlock_t *rw) +{ + unsigned long tmp; + + __asm__ __volatile__ ( + "1: \n\t" + "movli.l @%1, %0 ! __raw_read_unlock \n\t" + "add #1, %0 \n\t" + "movco.l %0, @%1 \n\t" + "bf 1b \n\t" + : "=&z" (tmp) + : "r" (&rw->lock) + : "t", "memory" + ); +} + +static inline void __raw_write_lock(raw_rwlock_t *rw) +{ + unsigned long tmp; + + __asm__ __volatile__ ( + "1: \n\t" + "movli.l @%1, %0 ! __raw_write_lock \n\t" + "cmp/hs %2, %0 \n\t" + "bf 1b \n\t" + "sub %2, %0 \n\t" + "movco.l %0, @%1 \n\t" + "bf 1b \n\t" + : "=&z" (tmp) + : "r" (&rw->lock), "r" (RW_LOCK_BIAS) + : "t", "memory" + ); +} + +static inline void __raw_write_unlock(raw_rwlock_t *rw) +{ + __asm__ __volatile__ ( + "mov.l %1, @%0 ! __raw_write_unlock \n\t" + : + : "r" (&rw->lock), "r" (RW_LOCK_BIAS) + : "t", "memory" + ); +} + +static inline int __raw_read_trylock(raw_rwlock_t *rw) +{ + unsigned long tmp, oldval; + + __asm__ __volatile__ ( + "1: \n\t" + "movli.l @%2, %0 ! __raw_read_trylock \n\t" + "mov %0, %1 \n\t" + "cmp/pl %0 \n\t" + "bf 2f \n\t" + "add #-1, %0 \n\t" + "movco.l %0, @%2 \n\t" + "bf 1b \n\t" + "2: \n\t" + "synco \n\t" + : "=&z" (tmp), "=&r" (oldval) + : "r" (&rw->lock) + : "t", "memory" + ); + + return (oldval > 0); +} + +static inline int __raw_write_trylock(raw_rwlock_t *rw) +{ + unsigned long tmp, oldval; + + __asm__ __volatile__ ( + "1: \n\t" + "movli.l @%2, %0 ! __raw_write_trylock \n\t" + "mov %0, %1 \n\t" + "cmp/hs %3, %0 \n\t" + "bf 2f \n\t" + "sub %3, %0 \n\t" + "2: \n\t" + "movco.l %0, @%2 \n\t" + "bf 1b \n\t" + "synco \n\t" + : "=&z" (tmp), "=&r" (oldval) + : "r" (&rw->lock), "r" (RW_LOCK_BIAS) + : "t", "memory" + ); + + return (oldval > (RW_LOCK_BIAS - 1)); +} + +#define _raw_spin_relax(lock) cpu_relax() +#define _raw_read_relax(lock) cpu_relax() +#define _raw_write_relax(lock) cpu_relax() + +#endif /* __ASM_SH_SPINLOCK_H */ diff --git a/arch/sh/include/asm/spinlock_types.h b/arch/sh/include/asm/spinlock_types.h new file mode 100644 index 000000000000..b4d244e7b60c --- /dev/null +++ b/arch/sh/include/asm/spinlock_types.h @@ -0,0 +1,21 @@ +#ifndef __ASM_SH_SPINLOCK_TYPES_H +#define __ASM_SH_SPINLOCK_TYPES_H + +#ifndef __LINUX_SPINLOCK_TYPES_H +# error "please don't include this file directly" +#endif + +typedef struct { + volatile unsigned int lock; +} raw_spinlock_t; + +#define __RAW_SPIN_LOCK_UNLOCKED { 1 } + +typedef struct { + volatile unsigned int lock; +} raw_rwlock_t; + +#define RW_LOCK_BIAS 0x01000000 +#define __RAW_RW_LOCK_UNLOCKED { RW_LOCK_BIAS } + +#endif diff --git a/arch/sh/include/asm/stat.h b/arch/sh/include/asm/stat.h new file mode 100644 index 000000000000..e1810cc6e3da --- /dev/null +++ b/arch/sh/include/asm/stat.h @@ -0,0 +1,138 @@ +#ifndef __ASM_SH_STAT_H +#define __ASM_SH_STAT_H + +struct __old_kernel_stat { + unsigned short st_dev; + unsigned short st_ino; + unsigned short st_mode; + unsigned short st_nlink; + unsigned short st_uid; + unsigned short st_gid; + unsigned short st_rdev; + unsigned long st_size; + unsigned long st_atime; + unsigned long st_mtime; + unsigned long st_ctime; +}; + +#if defined(__SH5__) || defined(CONFIG_CPU_SH5) +struct stat { + unsigned short st_dev; + unsigned short __pad1; + unsigned long st_ino; + unsigned short st_mode; + unsigned short st_nlink; + unsigned short st_uid; + unsigned short st_gid; + unsigned short st_rdev; + unsigned short __pad2; + unsigned long st_size; + unsigned long st_blksize; + unsigned long st_blocks; + unsigned long st_atime; + unsigned long st_atime_nsec; + unsigned long st_mtime; + unsigned long st_mtime_nsec; + unsigned long st_ctime; + unsigned long st_ctime_nsec; + unsigned long __unused4; + unsigned long __unused5; +}; + +/* This matches struct stat64 in glibc2.1, hence the absolutely + * insane amounts of padding around dev_t's. + */ +struct stat64 { + unsigned short st_dev; + unsigned char __pad0[10]; + + unsigned long st_ino; + unsigned int st_mode; + unsigned int st_nlink; + + unsigned long st_uid; + unsigned long st_gid; + + unsigned short st_rdev; + unsigned char __pad3[10]; + + long long st_size; + unsigned long st_blksize; + + unsigned long st_blocks; /* Number 512-byte blocks allocated. */ + unsigned long __pad4; /* future possible st_blocks high bits */ + + unsigned long st_atime; + unsigned long st_atime_nsec; + + unsigned long st_mtime; + unsigned long st_mtime_nsec; + + unsigned long st_ctime; + unsigned long st_ctime_nsec; /* will be high 32 bits of ctime someday */ + + unsigned long __unused1; + unsigned long __unused2; +}; +#else +struct stat { + unsigned long st_dev; + unsigned long st_ino; + unsigned short st_mode; + unsigned short st_nlink; + unsigned short st_uid; + unsigned short st_gid; + unsigned long st_rdev; + unsigned long st_size; + unsigned long st_blksize; + unsigned long st_blocks; + unsigned long st_atime; + unsigned long st_atime_nsec; + unsigned long st_mtime; + unsigned long st_mtime_nsec; + unsigned long st_ctime; + unsigned long st_ctime_nsec; + unsigned long __unused4; + unsigned long __unused5; +}; + +/* This matches struct stat64 in glibc2.1, hence the absolutely + * insane amounts of padding around dev_t's. + */ +struct stat64 { + unsigned long long st_dev; + unsigned char __pad0[4]; + +#define STAT64_HAS_BROKEN_ST_INO 1 + unsigned long __st_ino; + + unsigned int st_mode; + unsigned int st_nlink; + + unsigned long st_uid; + unsigned long st_gid; + + unsigned long long st_rdev; + unsigned char __pad3[4]; + + long long st_size; + unsigned long st_blksize; + + unsigned long long st_blocks; /* Number 512-byte blocks allocated. */ + + unsigned long st_atime; + unsigned long st_atime_nsec; + + unsigned long st_mtime; + unsigned long st_mtime_nsec; + + unsigned long st_ctime; + unsigned long st_ctime_nsec; + + unsigned long long st_ino; +}; + +#define STAT_HAVE_NSEC 1 +#endif + +#endif /* __ASM_SH_STAT_H */ diff --git a/arch/sh/include/asm/statfs.h b/arch/sh/include/asm/statfs.h new file mode 100644 index 000000000000..9202a023328f --- /dev/null +++ b/arch/sh/include/asm/statfs.h @@ -0,0 +1,6 @@ +#ifndef __ASM_SH_STATFS_H +#define __ASM_SH_STATFS_H + +#include <asm-generic/statfs.h> + +#endif /* __ASM_SH_STATFS_H */ diff --git a/arch/sh/include/asm/string.h b/arch/sh/include/asm/string.h new file mode 100644 index 000000000000..8c1ea21dc0ae --- /dev/null +++ b/arch/sh/include/asm/string.h @@ -0,0 +1,5 @@ +#ifdef CONFIG_SUPERH32 +# include "string_32.h" +#else +# include "string_64.h" +#endif diff --git a/arch/sh/include/asm/string_32.h b/arch/sh/include/asm/string_32.h new file mode 100644 index 000000000000..55f8db6bc1d7 --- /dev/null +++ b/arch/sh/include/asm/string_32.h @@ -0,0 +1,131 @@ +#ifndef __ASM_SH_STRING_H +#define __ASM_SH_STRING_H + +#ifdef __KERNEL__ + +/* + * Copyright (C) 1999 Niibe Yutaka + * But consider these trivial functions to be public domain. + */ + +#define __HAVE_ARCH_STRCPY +static inline char *strcpy(char *__dest, const char *__src) +{ + register char *__xdest = __dest; + unsigned long __dummy; + + __asm__ __volatile__("1:\n\t" + "mov.b @%1+, %2\n\t" + "mov.b %2, @%0\n\t" + "cmp/eq #0, %2\n\t" + "bf/s 1b\n\t" + " add #1, %0\n\t" + : "=r" (__dest), "=r" (__src), "=&z" (__dummy) + : "0" (__dest), "1" (__src) + : "memory", "t"); + + return __xdest; +} + +#define __HAVE_ARCH_STRNCPY +static inline char *strncpy(char *__dest, const char *__src, size_t __n) +{ + register char *__xdest = __dest; + unsigned long __dummy; + + if (__n == 0) + return __xdest; + + __asm__ __volatile__( + "1:\n" + "mov.b @%1+, %2\n\t" + "mov.b %2, @%0\n\t" + "cmp/eq #0, %2\n\t" + "bt/s 2f\n\t" + " cmp/eq %5,%1\n\t" + "bf/s 1b\n\t" + " add #1, %0\n" + "2:" + : "=r" (__dest), "=r" (__src), "=&z" (__dummy) + : "0" (__dest), "1" (__src), "r" (__src+__n) + : "memory", "t"); + + return __xdest; +} + +#define __HAVE_ARCH_STRCMP +static inline int strcmp(const char *__cs, const char *__ct) +{ + register int __res; + unsigned long __dummy; + + __asm__ __volatile__( + "mov.b @%1+, %3\n" + "1:\n\t" + "mov.b @%0+, %2\n\t" + "cmp/eq #0, %3\n\t" + "bt 2f\n\t" + "cmp/eq %2, %3\n\t" + "bt/s 1b\n\t" + " mov.b @%1+, %3\n\t" + "add #-2, %1\n\t" + "mov.b @%1, %3\n\t" + "sub %3, %2\n" + "2:" + : "=r" (__cs), "=r" (__ct), "=&r" (__res), "=&z" (__dummy) + : "0" (__cs), "1" (__ct) + : "t"); + + return __res; +} + +#define __HAVE_ARCH_STRNCMP +static inline int strncmp(const char *__cs, const char *__ct, size_t __n) +{ + register int __res; + unsigned long __dummy; + + if (__n == 0) + return 0; + + __asm__ __volatile__( + "mov.b @%1+, %3\n" + "1:\n\t" + "mov.b @%0+, %2\n\t" + "cmp/eq %6, %0\n\t" + "bt/s 2f\n\t" + " cmp/eq #0, %3\n\t" + "bt/s 3f\n\t" + " cmp/eq %3, %2\n\t" + "bt/s 1b\n\t" + " mov.b @%1+, %3\n\t" + "add #-2, %1\n\t" + "mov.b @%1, %3\n" + "2:\n\t" + "sub %3, %2\n" + "3:" + :"=r" (__cs), "=r" (__ct), "=&r" (__res), "=&z" (__dummy) + : "0" (__cs), "1" (__ct), "r" (__cs+__n) + : "t"); + + return __res; +} + +#define __HAVE_ARCH_MEMSET +extern void *memset(void *__s, int __c, size_t __count); + +#define __HAVE_ARCH_MEMCPY +extern void *memcpy(void *__to, __const__ void *__from, size_t __n); + +#define __HAVE_ARCH_MEMMOVE +extern void *memmove(void *__dest, __const__ void *__src, size_t __n); + +#define __HAVE_ARCH_MEMCHR +extern void *memchr(const void *__s, int __c, size_t __n); + +#define __HAVE_ARCH_STRLEN +extern size_t strlen(const char *); + +#endif /* __KERNEL__ */ + +#endif /* __ASM_SH_STRING_H */ diff --git a/arch/sh/include/asm/string_64.h b/arch/sh/include/asm/string_64.h new file mode 100644 index 000000000000..aa1fef229c78 --- /dev/null +++ b/arch/sh/include/asm/string_64.h @@ -0,0 +1,17 @@ +#ifndef __ASM_SH_STRING_64_H +#define __ASM_SH_STRING_64_H + +/* + * include/asm-sh/string_64.h + * + * Copyright (C) 2000, 2001 Paolo Alberelli + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#define __HAVE_ARCH_MEMCPY +extern void *memcpy(void *dest, const void *src, size_t count); + +#endif /* __ASM_SH_STRING_64_H */ diff --git a/arch/sh/include/asm/system.h b/arch/sh/include/asm/system.h new file mode 100644 index 000000000000..056d68cd2108 --- /dev/null +++ b/arch/sh/include/asm/system.h @@ -0,0 +1,190 @@ +#ifndef __ASM_SH_SYSTEM_H +#define __ASM_SH_SYSTEM_H + +/* + * Copyright (C) 1999, 2000 Niibe Yutaka & Kaz Kojima + * Copyright (C) 2002 Paul Mundt + */ + +#include <linux/irqflags.h> +#include <linux/compiler.h> +#include <linux/linkage.h> +#include <asm/types.h> +#include <asm/ptrace.h> + +#define AT_VECTOR_SIZE_ARCH 5 /* entries in ARCH_DLINFO */ + +#if defined(CONFIG_CPU_SH4A) || defined(CONFIG_CPU_SH5) +#define __icbi() \ +{ \ + unsigned long __addr; \ + __addr = 0xa8000000; \ + __asm__ __volatile__( \ + "icbi %0\n\t" \ + : /* no output */ \ + : "m" (__m(__addr))); \ +} +#endif + +/* + * A brief note on ctrl_barrier(), the control register write barrier. + * + * Legacy SH cores typically require a sequence of 8 nops after + * modification of a control register in order for the changes to take + * effect. On newer cores (like the sh4a and sh5) this is accomplished + * with icbi. + * + * Also note that on sh4a in the icbi case we can forego a synco for the + * write barrier, as it's not necessary for control registers. + * + * Historically we have only done this type of barrier for the MMUCR, but + * it's also necessary for the CCR, so we make it generic here instead. + */ +#if defined(CONFIG_CPU_SH4A) || defined(CONFIG_CPU_SH5) +#define mb() __asm__ __volatile__ ("synco": : :"memory") +#define rmb() mb() +#define wmb() __asm__ __volatile__ ("synco": : :"memory") +#define ctrl_barrier() __icbi() +#define read_barrier_depends() do { } while(0) +#else +#define mb() __asm__ __volatile__ ("": : :"memory") +#define rmb() mb() +#define wmb() __asm__ __volatile__ ("": : :"memory") +#define ctrl_barrier() __asm__ __volatile__ ("nop;nop;nop;nop;nop;nop;nop;nop") +#define read_barrier_depends() do { } while(0) +#endif + +#ifdef CONFIG_SMP +#define smp_mb() mb() +#define smp_rmb() rmb() +#define smp_wmb() wmb() +#define smp_read_barrier_depends() read_barrier_depends() +#else +#define smp_mb() barrier() +#define smp_rmb() barrier() +#define smp_wmb() barrier() +#define smp_read_barrier_depends() do { } while(0) +#endif + +#define set_mb(var, value) do { (void)xchg(&var, value); } while (0) + +#ifdef CONFIG_GUSA_RB +#include <asm/cmpxchg-grb.h> +#else +#include <asm/cmpxchg-irq.h> +#endif + +extern void __xchg_called_with_bad_pointer(void); + +#define __xchg(ptr, x, size) \ +({ \ + unsigned long __xchg__res; \ + volatile void *__xchg_ptr = (ptr); \ + switch (size) { \ + case 4: \ + __xchg__res = xchg_u32(__xchg_ptr, x); \ + break; \ + case 1: \ + __xchg__res = xchg_u8(__xchg_ptr, x); \ + break; \ + default: \ + __xchg_called_with_bad_pointer(); \ + __xchg__res = x; \ + break; \ + } \ + \ + __xchg__res; \ +}) + +#define xchg(ptr,x) \ + ((__typeof__(*(ptr)))__xchg((ptr),(unsigned long)(x), sizeof(*(ptr)))) + +/* This function doesn't exist, so you'll get a linker error + * if something tries to do an invalid cmpxchg(). */ +extern void __cmpxchg_called_with_bad_pointer(void); + +#define __HAVE_ARCH_CMPXCHG 1 + +static inline unsigned long __cmpxchg(volatile void * ptr, unsigned long old, + unsigned long new, int size) +{ + switch (size) { + case 4: + return __cmpxchg_u32(ptr, old, new); + } + __cmpxchg_called_with_bad_pointer(); + return old; +} + +#define cmpxchg(ptr,o,n) \ + ({ \ + __typeof__(*(ptr)) _o_ = (o); \ + __typeof__(*(ptr)) _n_ = (n); \ + (__typeof__(*(ptr))) __cmpxchg((ptr), (unsigned long)_o_, \ + (unsigned long)_n_, sizeof(*(ptr))); \ + }) + +extern void die(const char *str, struct pt_regs *regs, long err) __attribute__ ((noreturn)); + +extern void *set_exception_table_vec(unsigned int vec, void *handler); + +static inline void *set_exception_table_evt(unsigned int evt, void *handler) +{ + return set_exception_table_vec(evt >> 5, handler); +} + +/* + * SH-2A has both 16 and 32-bit opcodes, do lame encoding checks. + */ +#ifdef CONFIG_CPU_SH2A +extern unsigned int instruction_size(unsigned int insn); +#elif defined(CONFIG_SUPERH32) +#define instruction_size(insn) (2) +#else +#define instruction_size(insn) (4) +#endif + +extern unsigned long cached_to_uncached; + +extern struct dentry *sh_debugfs_root; + +void per_cpu_trap_init(void); + +asmlinkage void break_point_trap(void); + +#ifdef CONFIG_SUPERH32 +#define BUILD_TRAP_HANDLER(name) \ +asmlinkage void name##_trap_handler(unsigned long r4, unsigned long r5, \ + unsigned long r6, unsigned long r7, \ + struct pt_regs __regs) + +#define TRAP_HANDLER_DECL \ + struct pt_regs *regs = RELOC_HIDE(&__regs, 0); \ + unsigned int vec = regs->tra; \ + (void)vec; +#else +#define BUILD_TRAP_HANDLER(name) \ +asmlinkage void name##_trap_handler(unsigned int vec, struct pt_regs *regs) +#define TRAP_HANDLER_DECL +#endif + +BUILD_TRAP_HANDLER(address_error); +BUILD_TRAP_HANDLER(debug); +BUILD_TRAP_HANDLER(bug); +BUILD_TRAP_HANDLER(fpu_error); +BUILD_TRAP_HANDLER(fpu_state_restore); + +#define arch_align_stack(x) (x) + +struct mem_access { + unsigned long (*from)(void *dst, const void *src, unsigned long cnt); + unsigned long (*to)(void *dst, const void *src, unsigned long cnt); +}; + +#ifdef CONFIG_SUPERH32 +# include "system_32.h" +#else +# include "system_64.h" +#endif + +#endif diff --git a/arch/sh/include/asm/system_32.h b/arch/sh/include/asm/system_32.h new file mode 100644 index 000000000000..f11bcf0855ed --- /dev/null +++ b/arch/sh/include/asm/system_32.h @@ -0,0 +1,102 @@ +#ifndef __ASM_SH_SYSTEM_32_H +#define __ASM_SH_SYSTEM_32_H + +#include <linux/types.h> + +struct task_struct *__switch_to(struct task_struct *prev, + struct task_struct *next); + +/* + * switch_to() should switch tasks to task nr n, first + */ +#define switch_to(prev, next, last) \ +do { \ + register u32 *__ts1 __asm__ ("r1") = (u32 *)&prev->thread.sp; \ + register u32 *__ts2 __asm__ ("r2") = (u32 *)&prev->thread.pc; \ + register u32 *__ts4 __asm__ ("r4") = (u32 *)prev; \ + register u32 *__ts5 __asm__ ("r5") = (u32 *)next; \ + register u32 *__ts6 __asm__ ("r6") = (u32 *)&next->thread.sp; \ + register u32 __ts7 __asm__ ("r7") = next->thread.pc; \ + struct task_struct *__last; \ + \ + __asm__ __volatile__ ( \ + ".balign 4\n\t" \ + "stc.l gbr, @-r15\n\t" \ + "sts.l pr, @-r15\n\t" \ + "mov.l r8, @-r15\n\t" \ + "mov.l r9, @-r15\n\t" \ + "mov.l r10, @-r15\n\t" \ + "mov.l r11, @-r15\n\t" \ + "mov.l r12, @-r15\n\t" \ + "mov.l r13, @-r15\n\t" \ + "mov.l r14, @-r15\n\t" \ + "mov.l r15, @r1\t! save SP\n\t" \ + "mov.l @r6, r15\t! change to new stack\n\t" \ + "mova 1f, %0\n\t" \ + "mov.l %0, @r2\t! save PC\n\t" \ + "mov.l 2f, %0\n\t" \ + "jmp @%0\t! call __switch_to\n\t" \ + " lds r7, pr\t! with return to new PC\n\t" \ + ".balign 4\n" \ + "2:\n\t" \ + ".long __switch_to\n" \ + "1:\n\t" \ + "mov.l @r15+, r14\n\t" \ + "mov.l @r15+, r13\n\t" \ + "mov.l @r15+, r12\n\t" \ + "mov.l @r15+, r11\n\t" \ + "mov.l @r15+, r10\n\t" \ + "mov.l @r15+, r9\n\t" \ + "mov.l @r15+, r8\n\t" \ + "lds.l @r15+, pr\n\t" \ + "ldc.l @r15+, gbr\n\t" \ + : "=z" (__last) \ + : "r" (__ts1), "r" (__ts2), "r" (__ts4), \ + "r" (__ts5), "r" (__ts6), "r" (__ts7) \ + : "r3", "t"); \ + \ + last = __last; \ +} while (0) + +#define __uses_jump_to_uncached __attribute__ ((__section__ (".uncached.text"))) + +/* + * Jump to uncached area. + * When handling TLB or caches, we need to do it from an uncached area. + */ +#define jump_to_uncached() \ +do { \ + unsigned long __dummy; \ + \ + __asm__ __volatile__( \ + "mova 1f, %0\n\t" \ + "add %1, %0\n\t" \ + "jmp @%0\n\t" \ + " nop\n\t" \ + ".balign 4\n" \ + "1:" \ + : "=&z" (__dummy) \ + : "r" (cached_to_uncached)); \ +} while (0) + +/* + * Back to cached area. + */ +#define back_to_cached() \ +do { \ + unsigned long __dummy; \ + ctrl_barrier(); \ + __asm__ __volatile__( \ + "mov.l 1f, %0\n\t" \ + "jmp @%0\n\t" \ + " nop\n\t" \ + ".balign 4\n" \ + "1: .long 2f\n" \ + "2:" \ + : "=&r" (__dummy)); \ +} while (0) + +int handle_unaligned_access(opcode_t instruction, struct pt_regs *regs, + struct mem_access *ma); + +#endif /* __ASM_SH_SYSTEM_32_H */ diff --git a/arch/sh/include/asm/system_64.h b/arch/sh/include/asm/system_64.h new file mode 100644 index 000000000000..943acf5ea07c --- /dev/null +++ b/arch/sh/include/asm/system_64.h @@ -0,0 +1,40 @@ +#ifndef __ASM_SH_SYSTEM_64_H +#define __ASM_SH_SYSTEM_64_H + +/* + * include/asm-sh/system_64.h + * + * Copyright (C) 2000, 2001 Paolo Alberelli + * Copyright (C) 2003 Paul Mundt + * Copyright (C) 2004 Richard Curnow + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <asm/processor.h> + +/* + * switch_to() should switch tasks to task nr n, first + */ +struct task_struct *sh64_switch_to(struct task_struct *prev, + struct thread_struct *prev_thread, + struct task_struct *next, + struct thread_struct *next_thread); + +#define switch_to(prev,next,last) \ +do { \ + if (last_task_used_math != next) { \ + struct pt_regs *regs = next->thread.uregs; \ + if (regs) regs->sr |= SR_FD; \ + } \ + last = sh64_switch_to(prev, &prev->thread, next, \ + &next->thread); \ +} while (0) + +#define __uses_jump_to_uncached + +#define jump_to_uncached() do { } while (0) +#define back_to_cached() do { } while (0) + +#endif /* __ASM_SH_SYSTEM_64_H */ diff --git a/arch/sh/include/asm/systemh7751.h b/arch/sh/include/asm/systemh7751.h new file mode 100644 index 000000000000..4161122c84ef --- /dev/null +++ b/arch/sh/include/asm/systemh7751.h @@ -0,0 +1,71 @@ +#ifndef __ASM_SH_SYSTEMH_7751SYSTEMH_H +#define __ASM_SH_SYSTEMH_7751SYSTEMH_H + +/* + * linux/include/asm-sh/systemh/7751systemh.h + * + * Copyright (C) 2000 Kazumoto Kojima + * + * Hitachi SystemH support + + * Modified for 7751 SystemH by + * Jonathan Short, 2002. + */ + +/* Box specific addresses. */ + +#define PA_ROM 0x00000000 /* EPROM */ +#define PA_ROM_SIZE 0x00400000 /* EPROM size 4M byte */ +#define PA_FROM 0x01000000 /* EPROM */ +#define PA_FROM_SIZE 0x00400000 /* EPROM size 4M byte */ +#define PA_EXT1 0x04000000 +#define PA_EXT1_SIZE 0x04000000 +#define PA_EXT2 0x08000000 +#define PA_EXT2_SIZE 0x04000000 +#define PA_SDRAM 0x0c000000 +#define PA_SDRAM_SIZE 0x04000000 + +#define PA_EXT4 0x12000000 +#define PA_EXT4_SIZE 0x02000000 +#define PA_EXT5 0x14000000 +#define PA_EXT5_SIZE 0x04000000 +#define PA_PCIC 0x18000000 /* MR-SHPC-01 PCMCIA */ + +#define PA_DIPSW0 0xb9000000 /* Dip switch 5,6 */ +#define PA_DIPSW1 0xb9000002 /* Dip switch 7,8 */ +#define PA_LED 0xba000000 /* LED */ +#define PA_BCR 0xbb000000 /* FPGA on the MS7751SE01 */ + +#define PA_MRSHPC 0xb83fffe0 /* MR-SHPC-01 PCMCIA controller */ +#define PA_MRSHPC_MW1 0xb8400000 /* MR-SHPC-01 memory window base */ +#define PA_MRSHPC_MW2 0xb8500000 /* MR-SHPC-01 attribute window base */ +#define PA_MRSHPC_IO 0xb8600000 /* MR-SHPC-01 I/O window base */ +#define MRSHPC_MODE (PA_MRSHPC + 4) +#define MRSHPC_OPTION (PA_MRSHPC + 6) +#define MRSHPC_CSR (PA_MRSHPC + 8) +#define MRSHPC_ISR (PA_MRSHPC + 10) +#define MRSHPC_ICR (PA_MRSHPC + 12) +#define MRSHPC_CPWCR (PA_MRSHPC + 14) +#define MRSHPC_MW0CR1 (PA_MRSHPC + 16) +#define MRSHPC_MW1CR1 (PA_MRSHPC + 18) +#define MRSHPC_IOWCR1 (PA_MRSHPC + 20) +#define MRSHPC_MW0CR2 (PA_MRSHPC + 22) +#define MRSHPC_MW1CR2 (PA_MRSHPC + 24) +#define MRSHPC_IOWCR2 (PA_MRSHPC + 26) +#define MRSHPC_CDCR (PA_MRSHPC + 28) +#define MRSHPC_PCIC_INFO (PA_MRSHPC + 30) + +#define BCR_ILCRA (PA_BCR + 0) +#define BCR_ILCRB (PA_BCR + 2) +#define BCR_ILCRC (PA_BCR + 4) +#define BCR_ILCRD (PA_BCR + 6) +#define BCR_ILCRE (PA_BCR + 8) +#define BCR_ILCRF (PA_BCR + 10) +#define BCR_ILCRG (PA_BCR + 12) + +#define IRQ_79C973 13 + +#define __IO_PREFIX sh7751systemh +#include <asm/io_generic.h> + +#endif /* __ASM_SH_SYSTEMH_7751SYSTEMH_H */ diff --git a/arch/sh/include/asm/termbits.h b/arch/sh/include/asm/termbits.h new file mode 100644 index 000000000000..77db116948cf --- /dev/null +++ b/arch/sh/include/asm/termbits.h @@ -0,0 +1,198 @@ +#ifndef __ASM_SH_TERMBITS_H +#define __ASM_SH_TERMBITS_H + +#include <linux/posix_types.h> + +typedef unsigned char cc_t; +typedef unsigned int speed_t; +typedef unsigned int tcflag_t; + +#define NCCS 19 +struct termios { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_line; /* line discipline */ + cc_t c_cc[NCCS]; /* control characters */ +}; + +struct termios2 { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_line; /* line discipline */ + cc_t c_cc[NCCS]; /* control characters */ + speed_t c_ispeed; /* input speed */ + speed_t c_ospeed; /* output speed */ +}; + +struct ktermios { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_line; /* line discipline */ + cc_t c_cc[NCCS]; /* control characters */ + speed_t c_ispeed; /* input speed */ + speed_t c_ospeed; /* output speed */ +}; + +/* c_cc characters */ +#define VINTR 0 +#define VQUIT 1 +#define VERASE 2 +#define VKILL 3 +#define VEOF 4 +#define VTIME 5 +#define VMIN 6 +#define VSWTC 7 +#define VSTART 8 +#define VSTOP 9 +#define VSUSP 10 +#define VEOL 11 +#define VREPRINT 12 +#define VDISCARD 13 +#define VWERASE 14 +#define VLNEXT 15 +#define VEOL2 16 + +/* c_iflag bits */ +#define IGNBRK 0000001 +#define BRKINT 0000002 +#define IGNPAR 0000004 +#define PARMRK 0000010 +#define INPCK 0000020 +#define ISTRIP 0000040 +#define INLCR 0000100 +#define IGNCR 0000200 +#define ICRNL 0000400 +#define IUCLC 0001000 +#define IXON 0002000 +#define IXANY 0004000 +#define IXOFF 0010000 +#define IMAXBEL 0020000 +#define IUTF8 0040000 + +/* c_oflag bits */ +#define OPOST 0000001 +#define OLCUC 0000002 +#define ONLCR 0000004 +#define OCRNL 0000010 +#define ONOCR 0000020 +#define ONLRET 0000040 +#define OFILL 0000100 +#define OFDEL 0000200 +#define NLDLY 0000400 +#define NL0 0000000 +#define NL1 0000400 +#define CRDLY 0003000 +#define CR0 0000000 +#define CR1 0001000 +#define CR2 0002000 +#define CR3 0003000 +#define TABDLY 0014000 +#define TAB0 0000000 +#define TAB1 0004000 +#define TAB2 0010000 +#define TAB3 0014000 +#define XTABS 0014000 +#define BSDLY 0020000 +#define BS0 0000000 +#define BS1 0020000 +#define VTDLY 0040000 +#define VT0 0000000 +#define VT1 0040000 +#define FFDLY 0100000 +#define FF0 0000000 +#define FF1 0100000 + +/* c_cflag bit meaning */ +#define CBAUD 0010017 +#define B0 0000000 /* hang up */ +#define B50 0000001 +#define B75 0000002 +#define B110 0000003 +#define B134 0000004 +#define B150 0000005 +#define B200 0000006 +#define B300 0000007 +#define B600 0000010 +#define B1200 0000011 +#define B1800 0000012 +#define B2400 0000013 +#define B4800 0000014 +#define B9600 0000015 +#define B19200 0000016 +#define B38400 0000017 +#define EXTA B19200 +#define EXTB B38400 +#define CSIZE 0000060 +#define CS5 0000000 +#define CS6 0000020 +#define CS7 0000040 +#define CS8 0000060 +#define CSTOPB 0000100 +#define CREAD 0000200 +#define PARENB 0000400 +#define PARODD 0001000 +#define HUPCL 0002000 +#define CLOCAL 0004000 +#define CBAUDEX 0010000 +#define BOTHER 0010000 +#define B57600 0010001 +#define B115200 0010002 +#define B230400 0010003 +#define B460800 0010004 +#define B500000 0010005 +#define B576000 0010006 +#define B921600 0010007 +#define B1000000 0010010 +#define B1152000 0010011 +#define B1500000 0010012 +#define B2000000 0010013 +#define B2500000 0010014 +#define B3000000 0010015 +#define B3500000 0010016 +#define B4000000 0010017 +#define CIBAUD 002003600000 /* input baud rate */ +#define CMSPAR 010000000000 /* mark or space (stick) parity */ +#define CRTSCTS 020000000000 /* flow control */ + +#define IBSHIFT 16 /* Shift from CBAUD to CIBAUD */ + +/* c_lflag bits */ +#define ISIG 0000001 +#define ICANON 0000002 +#define XCASE 0000004 +#define ECHO 0000010 +#define ECHOE 0000020 +#define ECHOK 0000040 +#define ECHONL 0000100 +#define NOFLSH 0000200 +#define TOSTOP 0000400 +#define ECHOCTL 0001000 +#define ECHOPRT 0002000 +#define ECHOKE 0004000 +#define FLUSHO 0010000 +#define PENDIN 0040000 +#define IEXTEN 0100000 + +/* tcflow() and TCXONC use these */ +#define TCOOFF 0 +#define TCOON 1 +#define TCIOFF 2 +#define TCION 3 + +/* tcflush() and TCFLSH use these */ +#define TCIFLUSH 0 +#define TCOFLUSH 1 +#define TCIOFLUSH 2 + +/* tcsetattr uses these */ +#define TCSANOW 0 +#define TCSADRAIN 1 +#define TCSAFLUSH 2 + +#endif /* __ASM_SH_TERMBITS_H */ diff --git a/arch/sh/include/asm/termios.h b/arch/sh/include/asm/termios.h new file mode 100644 index 000000000000..0a8c793c76f2 --- /dev/null +++ b/arch/sh/include/asm/termios.h @@ -0,0 +1,90 @@ +#ifndef __ASM_SH_TERMIOS_H +#define __ASM_SH_TERMIOS_H + +#include <asm/termbits.h> +#include <asm/ioctls.h> + +struct winsize { + unsigned short ws_row; + unsigned short ws_col; + unsigned short ws_xpixel; + unsigned short ws_ypixel; +}; + +#define NCC 8 +struct termio { + unsigned short c_iflag; /* input mode flags */ + unsigned short c_oflag; /* output mode flags */ + unsigned short c_cflag; /* control mode flags */ + unsigned short c_lflag; /* local mode flags */ + unsigned char c_line; /* line discipline */ + unsigned char c_cc[NCC]; /* control characters */ +}; + +/* modem lines */ +#define TIOCM_LE 0x001 +#define TIOCM_DTR 0x002 +#define TIOCM_RTS 0x004 +#define TIOCM_ST 0x008 +#define TIOCM_SR 0x010 +#define TIOCM_CTS 0x020 +#define TIOCM_CAR 0x040 +#define TIOCM_RNG 0x080 +#define TIOCM_DSR 0x100 +#define TIOCM_CD TIOCM_CAR +#define TIOCM_RI TIOCM_RNG +#define TIOCM_OUT1 0x2000 +#define TIOCM_OUT2 0x4000 +#define TIOCM_LOOP 0x8000 + +/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */ + +#ifdef __KERNEL__ + +/* intr=^C quit=^\ erase=del kill=^U + eof=^D vtime=\0 vmin=\1 sxtc=\0 + start=^Q stop=^S susp=^Z eol=\0 + reprint=^R discard=^U werase=^W lnext=^V + eol2=\0 +*/ +#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0" + +/* + * Translate a "termio" structure into a "termios". Ugh. + */ +#define SET_LOW_TERMIOS_BITS(termios, termio, x) { \ + unsigned short __tmp; \ + get_user(__tmp,&(termio)->x); \ + *(unsigned short *) &(termios)->x = __tmp; \ +} + +#define user_termio_to_kernel_termios(termios, termio) \ +({ \ + SET_LOW_TERMIOS_BITS(termios, termio, c_iflag); \ + SET_LOW_TERMIOS_BITS(termios, termio, c_oflag); \ + SET_LOW_TERMIOS_BITS(termios, termio, c_cflag); \ + SET_LOW_TERMIOS_BITS(termios, termio, c_lflag); \ + copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \ +}) + +/* + * Translate a "termios" structure into a "termio". Ugh. + */ +#define kernel_termios_to_user_termio(termio, termios) \ +({ \ + put_user((termios)->c_iflag, &(termio)->c_iflag); \ + put_user((termios)->c_oflag, &(termio)->c_oflag); \ + put_user((termios)->c_cflag, &(termio)->c_cflag); \ + put_user((termios)->c_lflag, &(termio)->c_lflag); \ + put_user((termios)->c_line, &(termio)->c_line); \ + copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \ +}) + +#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios2)) +#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios2)) +#define user_termios_to_kernel_termios_1(k, u) copy_from_user(k, u, sizeof(struct termios)) +#define kernel_termios_to_user_termios_1(u, k) copy_to_user(u, k, sizeof(struct termios)) + +#endif /* __KERNEL__ */ + +#endif /* __ASM_SH_TERMIOS_H */ diff --git a/arch/sh/include/asm/thread_info.h b/arch/sh/include/asm/thread_info.h new file mode 100644 index 000000000000..0a894cafb1dd --- /dev/null +++ b/arch/sh/include/asm/thread_info.h @@ -0,0 +1,162 @@ +#ifndef __ASM_SH_THREAD_INFO_H +#define __ASM_SH_THREAD_INFO_H + +/* SuperH version + * Copyright (C) 2002 Niibe Yutaka + * + * The copyright of original i386 version is: + * + * Copyright (C) 2002 David Howells (dhowells@redhat.com) + * - Incorporating suggestions made by Linus Torvalds and Dave Miller + */ +#ifdef __KERNEL__ +#include <asm/page.h> + +#ifndef __ASSEMBLY__ +#include <asm/processor.h> + +struct thread_info { + struct task_struct *task; /* main task structure */ + struct exec_domain *exec_domain; /* execution domain */ + unsigned long flags; /* low level flags */ + __u32 cpu; + int preempt_count; /* 0 => preemptable, <0 => BUG */ + mm_segment_t addr_limit; /* thread address space */ + struct restart_block restart_block; + unsigned long previous_sp; /* sp of previous stack in case + of nested IRQ stacks */ + __u8 supervisor_stack[0]; +}; + +#endif + +#define PREEMPT_ACTIVE 0x10000000 + +#if defined(CONFIG_4KSTACKS) +#define THREAD_SIZE_ORDER (0) +#elif defined(CONFIG_PAGE_SIZE_4KB) +#define THREAD_SIZE_ORDER (1) +#elif defined(CONFIG_PAGE_SIZE_8KB) +#define THREAD_SIZE_ORDER (1) +#elif defined(CONFIG_PAGE_SIZE_16KB) +#define THREAD_SIZE_ORDER (0) +#elif defined(CONFIG_PAGE_SIZE_64KB) +#define THREAD_SIZE_ORDER (0) +#else +#error "Unknown thread size" +#endif + +#define THREAD_SIZE (PAGE_SIZE << THREAD_SIZE_ORDER) +#define STACK_WARN (THREAD_SIZE >> 3) + +/* + * macros/functions for gaining access to the thread information structure + */ +#ifndef __ASSEMBLY__ +#define INIT_THREAD_INFO(tsk) \ +{ \ + .task = &tsk, \ + .exec_domain = &default_exec_domain, \ + .flags = 0, \ + .cpu = 0, \ + .preempt_count = 1, \ + .addr_limit = KERNEL_DS, \ + .restart_block = { \ + .fn = do_no_restart_syscall, \ + }, \ +} + +#define init_thread_info (init_thread_union.thread_info) +#define init_stack (init_thread_union.stack) + +/* how to get the current stack pointer from C */ +register unsigned long current_stack_pointer asm("r15") __used; + +/* how to get the thread information struct from C */ +static inline struct thread_info *current_thread_info(void) +{ + struct thread_info *ti; +#if defined(CONFIG_SUPERH64) + __asm__ __volatile__ ("getcon cr17, %0" : "=r" (ti)); +#elif defined(CONFIG_CPU_HAS_SR_RB) + __asm__ __volatile__ ("stc r7_bank, %0" : "=r" (ti)); +#else + unsigned long __dummy; + + __asm__ __volatile__ ( + "mov r15, %0\n\t" + "and %1, %0\n\t" + : "=&r" (ti), "=r" (__dummy) + : "1" (~(THREAD_SIZE - 1)) + : "memory"); +#endif + + return ti; +} + +#define __HAVE_ARCH_THREAD_INFO_ALLOCATOR + +/* thread information allocation */ +#ifdef CONFIG_DEBUG_STACK_USAGE +#define alloc_thread_info(ti) kzalloc(THREAD_SIZE, GFP_KERNEL) +#else +#define alloc_thread_info(ti) kmalloc(THREAD_SIZE, GFP_KERNEL) +#endif +#define free_thread_info(ti) kfree(ti) + +#endif /* __ASSEMBLY__ */ + +/* + * thread information flags + * - these are process state flags that various assembly files may need to access + * - pending work-to-be-done flags are in LSW + * - other flags in MSW + */ +#define TIF_SYSCALL_TRACE 0 /* syscall trace active */ +#define TIF_SIGPENDING 1 /* signal pending */ +#define TIF_NEED_RESCHED 2 /* rescheduling necessary */ +#define TIF_RESTORE_SIGMASK 3 /* restore signal mask in do_signal() */ +#define TIF_SINGLESTEP 4 /* singlestepping active */ +#define TIF_SYSCALL_AUDIT 5 /* syscall auditing active */ +#define TIF_SECCOMP 6 /* secure computing */ +#define TIF_NOTIFY_RESUME 7 /* callback before returning to user */ +#define TIF_USEDFPU 16 /* FPU was used by this task this quantum (SMP) */ +#define TIF_POLLING_NRFLAG 17 /* true if poll_idle() is polling TIF_NEED_RESCHED */ +#define TIF_MEMDIE 18 +#define TIF_FREEZE 19 /* Freezing for suspend */ + +#define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE) +#define _TIF_SIGPENDING (1 << TIF_SIGPENDING) +#define _TIF_NEED_RESCHED (1 << TIF_NEED_RESCHED) +#define _TIF_RESTORE_SIGMASK (1 << TIF_RESTORE_SIGMASK) +#define _TIF_SINGLESTEP (1 << TIF_SINGLESTEP) +#define _TIF_SYSCALL_AUDIT (1 << TIF_SYSCALL_AUDIT) +#define _TIF_SECCOMP (1 << TIF_SECCOMP) +#define _TIF_NOTIFY_RESUME (1 << TIF_NOTIFY_RESUME) +#define _TIF_USEDFPU (1 << TIF_USEDFPU) +#define _TIF_POLLING_NRFLAG (1 << TIF_POLLING_NRFLAG) +#define _TIF_FREEZE (1 << TIF_FREEZE) + +/* + * _TIF_ALLWORK_MASK and _TIF_WORK_MASK need to fit within a byte, or we + * blow the tst immediate size constraints and need to fix up + * arch/sh/kernel/entry-common.S. + */ + +/* work to do in syscall trace */ +#define _TIF_WORK_SYSCALL_MASK (_TIF_SYSCALL_TRACE | _TIF_SINGLESTEP | \ + _TIF_SYSCALL_AUDIT | _TIF_SECCOMP) + +/* work to do on any return to u-space */ +#define _TIF_ALLWORK_MASK (_TIF_SYSCALL_TRACE | _TIF_SIGPENDING | \ + _TIF_NEED_RESCHED | _TIF_SYSCALL_AUDIT | \ + _TIF_SINGLESTEP | _TIF_RESTORE_SIGMASK | \ + _TIF_NOTIFY_RESUME) + +/* work to do on interrupt/exception return */ +#define _TIF_WORK_MASK (_TIF_ALLWORK_MASK & ~(_TIF_SYSCALL_TRACE | \ + _TIF_SYSCALL_AUDIT | _TIF_SINGLESTEP)) + +#endif /* __KERNEL__ */ + +#endif /* __ASM_SH_THREAD_INFO_H */ diff --git a/arch/sh/include/asm/timer.h b/arch/sh/include/asm/timer.h new file mode 100644 index 000000000000..a7ca3a195bb5 --- /dev/null +++ b/arch/sh/include/asm/timer.h @@ -0,0 +1,44 @@ +#ifndef __ASM_SH_TIMER_H +#define __ASM_SH_TIMER_H + +#include <linux/sysdev.h> +#include <linux/clocksource.h> +#include <cpu/timer.h> + +struct sys_timer_ops { + int (*init)(void); + int (*start)(void); + int (*stop)(void); + cycle_t (*read)(void); +#ifndef CONFIG_GENERIC_TIME + unsigned long (*get_offset)(void); +#endif +}; + +struct sys_timer { + const char *name; + + struct sys_device dev; + struct sys_timer_ops *ops; +}; + +#define TICK_SIZE (tick_nsec / 1000) + +extern struct sys_timer tmu_timer, cmt_timer, mtu2_timer; +extern struct sys_timer *sys_timer; + +#ifndef CONFIG_GENERIC_TIME +static inline unsigned long get_timer_offset(void) +{ + return sys_timer->ops->get_offset(); +} +#endif + +/* arch/sh/kernel/timers/timer.c */ +struct sys_timer *get_sys_timer(void); + +/* arch/sh/kernel/time.c */ +void handle_timer_tick(void); +extern unsigned long sh_hpt_frequency; + +#endif /* __ASM_SH_TIMER_H */ diff --git a/arch/sh/include/asm/timex.h b/arch/sh/include/asm/timex.h new file mode 100644 index 000000000000..a873e24113cf --- /dev/null +++ b/arch/sh/include/asm/timex.h @@ -0,0 +1,18 @@ +/* + * linux/include/asm-sh/timex.h + * + * sh architecture timex specifications + */ +#ifndef __ASM_SH_TIMEX_H +#define __ASM_SH_TIMEX_H + +#define CLOCK_TICK_RATE (CONFIG_SH_PCLK_FREQ / 4) /* Underlying HZ */ + +typedef unsigned long long cycles_t; + +static __inline__ cycles_t get_cycles (void) +{ + return 0; +} + +#endif /* __ASM_SH_TIMEX_H */ diff --git a/arch/sh/include/asm/titan.h b/arch/sh/include/asm/titan.h new file mode 100644 index 000000000000..03f3583c8918 --- /dev/null +++ b/arch/sh/include/asm/titan.h @@ -0,0 +1,17 @@ +/* + * Platform defintions for Titan + */ +#ifndef _ASM_SH_TITAN_H +#define _ASM_SH_TITAN_H + +#define __IO_PREFIX titan +#include <asm/io_generic.h> + +/* IRQ assignments */ +#define TITAN_IRQ_WAN 2 /* eth0 (WAN) */ +#define TITAN_IRQ_LAN 5 /* eth1 (LAN) */ +#define TITAN_IRQ_MPCIA 8 /* mPCI A */ +#define TITAN_IRQ_MPCIB 11 /* mPCI B */ +#define TITAN_IRQ_USB 11 /* USB */ + +#endif /* __ASM_SH_TITAN_H */ diff --git a/arch/sh/include/asm/tlb.h b/arch/sh/include/asm/tlb.h new file mode 100644 index 000000000000..88ff1ae8a6b8 --- /dev/null +++ b/arch/sh/include/asm/tlb.h @@ -0,0 +1,27 @@ +#ifndef __ASM_SH_TLB_H +#define __ASM_SH_TLB_H + +#ifdef CONFIG_SUPERH64 +# include "tlb_64.h" +#endif + +#ifndef __ASSEMBLY__ + +#define tlb_start_vma(tlb, vma) \ + flush_cache_range(vma, vma->vm_start, vma->vm_end) + +#define tlb_end_vma(tlb, vma) \ + flush_tlb_range(vma, vma->vm_start, vma->vm_end) + +#define __tlb_remove_tlb_entry(tlb, pte, address) do { } while (0) + +/* + * Flush whole TLBs for MM + */ +#define tlb_flush(tlb) flush_tlb_mm((tlb)->mm) + +#include <linux/pagemap.h> +#include <asm-generic/tlb.h> + +#endif /* __ASSEMBLY__ */ +#endif /* __ASM_SH_TLB_H */ diff --git a/arch/sh/include/asm/tlb_64.h b/arch/sh/include/asm/tlb_64.h new file mode 100644 index 000000000000..ef0ae2a28f23 --- /dev/null +++ b/arch/sh/include/asm/tlb_64.h @@ -0,0 +1,71 @@ +/* + * include/asm-sh/tlb_64.h + * + * Copyright (C) 2003 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_SH_TLB_64_H +#define __ASM_SH_TLB_64_H + +/* ITLB defines */ +#define ITLB_FIXED 0x00000000 /* First fixed ITLB, see head.S */ +#define ITLB_LAST_VAR_UNRESTRICTED 0x000003F0 /* Last ITLB */ + +/* DTLB defines */ +#define DTLB_FIXED 0x00800000 /* First fixed DTLB, see head.S */ +#define DTLB_LAST_VAR_UNRESTRICTED 0x008003F0 /* Last DTLB */ + +#ifndef __ASSEMBLY__ + +/** + * for_each_dtlb_entry - Iterate over free (non-wired) DTLB entries + * + * @tlb: TLB entry + */ +#define for_each_dtlb_entry(tlb) \ + for (tlb = cpu_data->dtlb.first; \ + tlb <= cpu_data->dtlb.last; \ + tlb += cpu_data->dtlb.step) + +/** + * for_each_itlb_entry - Iterate over free (non-wired) ITLB entries + * + * @tlb: TLB entry + */ +#define for_each_itlb_entry(tlb) \ + for (tlb = cpu_data->itlb.first; \ + tlb <= cpu_data->itlb.last; \ + tlb += cpu_data->itlb.step) + +/** + * __flush_tlb_slot - Flushes TLB slot @slot. + * + * @slot: Address of TLB slot. + */ +static inline void __flush_tlb_slot(unsigned long long slot) +{ + __asm__ __volatile__ ("putcfg %0, 0, r63\n" : : "r" (slot)); +} + +#ifdef CONFIG_MMU +/* arch/sh64/mm/tlb.c */ +int sh64_tlb_init(void); +unsigned long long sh64_next_free_dtlb_entry(void); +unsigned long long sh64_get_wired_dtlb_entry(void); +int sh64_put_wired_dtlb_entry(unsigned long long entry); +void sh64_setup_tlb_slot(unsigned long long config_addr, unsigned long eaddr, + unsigned long asid, unsigned long paddr); +void sh64_teardown_tlb_slot(unsigned long long config_addr); +#else +#define sh64_tlb_init() do { } while (0) +#define sh64_next_free_dtlb_entry() (0) +#define sh64_get_wired_dtlb_entry() (0) +#define sh64_put_wired_dtlb_entry(entry) do { } while (0) +#define sh64_setup_tlb_slot(conf, virt, asid, phys) do { } while (0) +#define sh64_teardown_tlb_slot(addr) do { } while (0) +#endif /* CONFIG_MMU */ +#endif /* __ASSEMBLY__ */ +#endif /* __ASM_SH_TLB_64_H */ diff --git a/arch/sh/include/asm/tlbflush.h b/arch/sh/include/asm/tlbflush.h new file mode 100644 index 000000000000..e0ac97221ae6 --- /dev/null +++ b/arch/sh/include/asm/tlbflush.h @@ -0,0 +1,49 @@ +#ifndef __ASM_SH_TLBFLUSH_H +#define __ASM_SH_TLBFLUSH_H + +/* + * TLB flushing: + * + * - flush_tlb_all() flushes all processes TLBs + * - flush_tlb_mm(mm) flushes the specified mm context TLB's + * - flush_tlb_page(vma, vmaddr) flushes one page + * - flush_tlb_range(vma, start, end) flushes a range of pages + * - flush_tlb_kernel_range(start, end) flushes a range of kernel pages + */ +extern void local_flush_tlb_all(void); +extern void local_flush_tlb_mm(struct mm_struct *mm); +extern void local_flush_tlb_range(struct vm_area_struct *vma, + unsigned long start, + unsigned long end); +extern void local_flush_tlb_page(struct vm_area_struct *vma, + unsigned long page); +extern void local_flush_tlb_kernel_range(unsigned long start, + unsigned long end); +extern void local_flush_tlb_one(unsigned long asid, unsigned long page); + +#ifdef CONFIG_SMP + +extern void flush_tlb_all(void); +extern void flush_tlb_mm(struct mm_struct *mm); +extern void flush_tlb_range(struct vm_area_struct *vma, unsigned long start, + unsigned long end); +extern void flush_tlb_page(struct vm_area_struct *vma, unsigned long page); +extern void flush_tlb_kernel_range(unsigned long start, unsigned long end); +extern void flush_tlb_one(unsigned long asid, unsigned long page); + +#else + +#define flush_tlb_all() local_flush_tlb_all() +#define flush_tlb_mm(mm) local_flush_tlb_mm(mm) +#define flush_tlb_page(vma, page) local_flush_tlb_page(vma, page) +#define flush_tlb_one(asid, page) local_flush_tlb_one(asid, page) + +#define flush_tlb_range(vma, start, end) \ + local_flush_tlb_range(vma, start, end) + +#define flush_tlb_kernel_range(start, end) \ + local_flush_tlb_kernel_range(start, end) + +#endif /* CONFIG_SMP */ + +#endif /* __ASM_SH_TLBFLUSH_H */ diff --git a/arch/sh/include/asm/topology.h b/arch/sh/include/asm/topology.h new file mode 100644 index 000000000000..95f0085e098a --- /dev/null +++ b/arch/sh/include/asm/topology.h @@ -0,0 +1,47 @@ +#ifndef _ASM_SH_TOPOLOGY_H +#define _ASM_SH_TOPOLOGY_H + +#ifdef CONFIG_NUMA + +/* sched_domains SD_NODE_INIT for sh machines */ +#define SD_NODE_INIT (struct sched_domain) { \ + .span = CPU_MASK_NONE, \ + .parent = NULL, \ + .child = NULL, \ + .groups = NULL, \ + .min_interval = 8, \ + .max_interval = 32, \ + .busy_factor = 32, \ + .imbalance_pct = 125, \ + .cache_nice_tries = 2, \ + .busy_idx = 3, \ + .idle_idx = 2, \ + .newidle_idx = 2, \ + .wake_idx = 1, \ + .forkexec_idx = 1, \ + .flags = SD_LOAD_BALANCE \ + | SD_BALANCE_FORK \ + | SD_BALANCE_EXEC \ + | SD_SERIALIZE \ + | SD_WAKE_BALANCE, \ + .last_balance = jiffies, \ + .balance_interval = 1, \ + .nr_balance_failed = 0, \ +} + +#define cpu_to_node(cpu) ((void)(cpu),0) +#define parent_node(node) ((void)(node),0) + +#define node_to_cpumask(node) ((void)node, cpu_online_map) +#define node_to_first_cpu(node) ((void)(node),0) + +#define pcibus_to_node(bus) ((void)(bus), -1) +#define pcibus_to_cpumask(bus) (pcibus_to_node(bus) == -1 ? \ + CPU_MASK_ALL : \ + node_to_cpumask(pcibus_to_node(bus)) \ + ) +#endif + +#include <asm-generic/topology.h> + +#endif /* _ASM_SH_TOPOLOGY_H */ diff --git a/arch/sh/include/asm/types.h b/arch/sh/include/asm/types.h new file mode 100644 index 000000000000..beea4e6f8dfd --- /dev/null +++ b/arch/sh/include/asm/types.h @@ -0,0 +1,35 @@ +#ifndef __ASM_SH_TYPES_H +#define __ASM_SH_TYPES_H + +#include <asm-generic/int-ll64.h> + +#ifndef __ASSEMBLY__ + +typedef unsigned short umode_t; + +#endif /* __ASSEMBLY__ */ + +/* + * These aren't exported outside the kernel to avoid name space clashes + */ +#ifdef __KERNEL__ + +#define BITS_PER_LONG 32 + +#ifndef __ASSEMBLY__ + +/* Dma addresses are 32-bits wide. */ + +typedef u32 dma_addr_t; + +#ifdef CONFIG_SUPERH32 +typedef u16 opcode_t; +#else +typedef u32 opcode_t; +#endif + +#endif /* __ASSEMBLY__ */ + +#endif /* __KERNEL__ */ + +#endif /* __ASM_SH_TYPES_H */ diff --git a/arch/sh/include/asm/uaccess.h b/arch/sh/include/asm/uaccess.h new file mode 100644 index 000000000000..075848f43b6a --- /dev/null +++ b/arch/sh/include/asm/uaccess.h @@ -0,0 +1,258 @@ +#ifndef __ASM_SH_UACCESS_H +#define __ASM_SH_UACCESS_H + +#include <linux/errno.h> +#include <linux/sched.h> +#include <asm/segment.h> + +#define VERIFY_READ 0 +#define VERIFY_WRITE 1 + +#define __addr_ok(addr) \ + ((unsigned long __force)(addr) < current_thread_info()->addr_limit.seg) + +/* + * __access_ok: Check if address with size is OK or not. + * + * Uhhuh, this needs 33-bit arithmetic. We have a carry.. + * + * sum := addr + size; carry? --> flag = true; + * if (sum >= addr_limit) flag = true; + */ +#define __access_ok(addr, size) \ + (__addr_ok((addr) + (size))) +#define access_ok(type, addr, size) \ + (__chk_user_ptr(addr), \ + __access_ok((unsigned long __force)(addr), (size))) + +/* + * Uh, these should become the main single-value transfer routines ... + * They automatically use the right size if we just have the right + * pointer type ... + * + * As SuperH uses the same address space for kernel and user data, we + * can just do these as direct assignments. + * + * Careful to not + * (a) re-use the arguments for side effects (sizeof is ok) + * (b) require any knowledge of processes at this stage + */ +#define put_user(x,ptr) __put_user_check((x), (ptr), sizeof(*(ptr))) +#define get_user(x,ptr) __get_user_check((x), (ptr), sizeof(*(ptr))) + +/* + * The "__xxx" versions do not do address space checking, useful when + * doing multiple accesses to the same area (the user has to do the + * checks by hand with "access_ok()") + */ +#define __put_user(x,ptr) __put_user_nocheck((x), (ptr), sizeof(*(ptr))) +#define __get_user(x,ptr) __get_user_nocheck((x), (ptr), sizeof(*(ptr))) + +struct __large_struct { unsigned long buf[100]; }; +#define __m(x) (*(struct __large_struct __user *)(x)) + +#define __get_user_nocheck(x,ptr,size) \ +({ \ + long __gu_err; \ + unsigned long __gu_val; \ + const __typeof__(*(ptr)) __user *__gu_addr = (ptr); \ + __chk_user_ptr(ptr); \ + __get_user_size(__gu_val, __gu_addr, (size), __gu_err); \ + (x) = (__typeof__(*(ptr)))__gu_val; \ + __gu_err; \ +}) + +#define __get_user_check(x,ptr,size) \ +({ \ + long __gu_err = -EFAULT; \ + unsigned long __gu_val = 0; \ + const __typeof__(*(ptr)) *__gu_addr = (ptr); \ + if (likely(access_ok(VERIFY_READ, __gu_addr, (size)))) \ + __get_user_size(__gu_val, __gu_addr, (size), __gu_err); \ + (x) = (__typeof__(*(ptr)))__gu_val; \ + __gu_err; \ +}) + +#define __put_user_nocheck(x,ptr,size) \ +({ \ + long __pu_err; \ + __typeof__(*(ptr)) __user *__pu_addr = (ptr); \ + __typeof__(*(ptr)) __pu_val = x; \ + __chk_user_ptr(ptr); \ + __put_user_size(__pu_val, __pu_addr, (size), __pu_err); \ + __pu_err; \ +}) + +#define __put_user_check(x,ptr,size) \ +({ \ + long __pu_err = -EFAULT; \ + __typeof__(*(ptr)) __user *__pu_addr = (ptr); \ + __typeof__(*(ptr)) __pu_val = x; \ + if (likely(access_ok(VERIFY_WRITE, __pu_addr, size))) \ + __put_user_size(__pu_val, __pu_addr, (size), \ + __pu_err); \ + __pu_err; \ +}) + +#ifdef CONFIG_SUPERH32 +# include "uaccess_32.h" +#else +# include "uaccess_64.h" +#endif + +/* Generic arbitrary sized copy. */ +/* Return the number of bytes NOT copied */ +__kernel_size_t __copy_user(void *to, const void *from, __kernel_size_t n); + +static __always_inline unsigned long +__copy_from_user(void *to, const void __user *from, unsigned long n) +{ + return __copy_user(to, (__force void *)from, n); +} + +static __always_inline unsigned long __must_check +__copy_to_user(void __user *to, const void *from, unsigned long n) +{ + return __copy_user((__force void *)to, from, n); +} + +#define __copy_to_user_inatomic __copy_to_user +#define __copy_from_user_inatomic __copy_from_user + +/* + * Clear the area and return remaining number of bytes + * (on failure. Usually it's 0.) + */ +__kernel_size_t __clear_user(void *addr, __kernel_size_t size); + +#define clear_user(addr,n) \ +({ \ + void __user * __cl_addr = (addr); \ + unsigned long __cl_size = (n); \ + \ + if (__cl_size && access_ok(VERIFY_WRITE, \ + ((unsigned long)(__cl_addr)), __cl_size)) \ + __cl_size = __clear_user(__cl_addr, __cl_size); \ + \ + __cl_size; \ +}) + +/** + * strncpy_from_user: - Copy a NUL terminated string from userspace. + * @dst: Destination address, in kernel space. This buffer must be at + * least @count bytes long. + * @src: Source address, in user space. + * @count: Maximum number of bytes to copy, including the trailing NUL. + * + * Copies a NUL-terminated string from userspace to kernel space. + * + * On success, returns the length of the string (not including the trailing + * NUL). + * + * If access to userspace fails, returns -EFAULT (some data may have been + * copied). + * + * If @count is smaller than the length of the string, copies @count bytes + * and returns @count. + */ +#define strncpy_from_user(dest,src,count) \ +({ \ + unsigned long __sfu_src = (unsigned long)(src); \ + int __sfu_count = (int)(count); \ + long __sfu_res = -EFAULT; \ + \ + if (__access_ok(__sfu_src, __sfu_count)) \ + __sfu_res = __strncpy_from_user((unsigned long)(dest), \ + __sfu_src, __sfu_count); \ + \ + __sfu_res; \ +}) + +static inline unsigned long +copy_from_user(void *to, const void __user *from, unsigned long n) +{ + unsigned long __copy_from = (unsigned long) from; + __kernel_size_t __copy_size = (__kernel_size_t) n; + + if (__copy_size && __access_ok(__copy_from, __copy_size)) + return __copy_user(to, from, __copy_size); + + return __copy_size; +} + +static inline unsigned long +copy_to_user(void __user *to, const void *from, unsigned long n) +{ + unsigned long __copy_to = (unsigned long) to; + __kernel_size_t __copy_size = (__kernel_size_t) n; + + if (__copy_size && __access_ok(__copy_to, __copy_size)) + return __copy_user(to, from, __copy_size); + + return __copy_size; +} + +/** + * strnlen_user: - Get the size of a string in user space. + * @s: The string to measure. + * @n: The maximum valid length + * + * Context: User context only. This function may sleep. + * + * Get the size of a NUL-terminated string in user space. + * + * Returns the size of the string INCLUDING the terminating NUL. + * On exception, returns 0. + * If the string is too long, returns a value greater than @n. + */ +static inline long strnlen_user(const char __user *s, long n) +{ + if (!__addr_ok(s)) + return 0; + else + return __strnlen_user(s, n); +} + +/** + * strlen_user: - Get the size of a string in user space. + * @str: The string to measure. + * + * Context: User context only. This function may sleep. + * + * Get the size of a NUL-terminated string in user space. + * + * Returns the size of the string INCLUDING the terminating NUL. + * On exception, returns 0. + * + * If there is a limit on the length of a valid string, you may wish to + * consider using strnlen_user() instead. + */ +#define strlen_user(str) strnlen_user(str, ~0UL >> 1) + +/* + * The exception table consists of pairs of addresses: the first is the + * address of an instruction that is allowed to fault, and the second is + * the address at which the program should continue. No registers are + * modified, so it is entirely up to the continuation code to figure out + * what to do. + * + * All the routines below use bits of fixup code that are out of line + * with the main instruction path. This means when everything is well, + * we don't even have to jump over them. Further, they do not intrude + * on our cache or tlb entries. + */ +struct exception_table_entry { + unsigned long insn, fixup; +}; + +#if defined(CONFIG_SUPERH64) && defined(CONFIG_MMU) +#define ARCH_HAS_SEARCH_EXTABLE +#endif + +int fixup_exception(struct pt_regs *regs); +/* Returns 0 if exception not found and fixup.unit otherwise. */ +unsigned long search_exception_table(unsigned long addr); +const struct exception_table_entry *search_exception_tables(unsigned long addr); + + +#endif /* __ASM_SH_UACCESS_H */ diff --git a/arch/sh/include/asm/uaccess_32.h b/arch/sh/include/asm/uaccess_32.h new file mode 100644 index 000000000000..ae0d24f6653f --- /dev/null +++ b/arch/sh/include/asm/uaccess_32.h @@ -0,0 +1,248 @@ +/* + * User space memory access functions + * + * Copyright (C) 1999, 2002 Niibe Yutaka + * Copyright (C) 2003 - 2008 Paul Mundt + * + * Based on: + * MIPS implementation version 1.15 by + * Copyright (C) 1996, 1997, 1998 by Ralf Baechle + * and i386 version. + */ +#ifndef __ASM_SH_UACCESS_32_H +#define __ASM_SH_UACCESS_32_H + +#define __get_user_size(x,ptr,size,retval) \ +do { \ + retval = 0; \ + switch (size) { \ + case 1: \ + __get_user_asm(x, ptr, retval, "b"); \ + break; \ + case 2: \ + __get_user_asm(x, ptr, retval, "w"); \ + break; \ + case 4: \ + __get_user_asm(x, ptr, retval, "l"); \ + break; \ + default: \ + __get_user_unknown(); \ + break; \ + } \ +} while (0) + +#ifdef CONFIG_MMU +#define __get_user_asm(x, addr, err, insn) \ +({ \ +__asm__ __volatile__( \ + "1:\n\t" \ + "mov." insn " %2, %1\n\t" \ + "2:\n" \ + ".section .fixup,\"ax\"\n" \ + "3:\n\t" \ + "mov #0, %1\n\t" \ + "mov.l 4f, %0\n\t" \ + "jmp @%0\n\t" \ + " mov %3, %0\n\t" \ + ".balign 4\n" \ + "4: .long 2b\n\t" \ + ".previous\n" \ + ".section __ex_table,\"a\"\n\t" \ + ".long 1b, 3b\n\t" \ + ".previous" \ + :"=&r" (err), "=&r" (x) \ + :"m" (__m(addr)), "i" (-EFAULT), "0" (err)); }) +#else +#define __get_user_asm(x, addr, err, insn) \ +do { \ + __asm__ __volatile__ ( \ + "mov." insn " %1, %0\n\t" \ + : "=&r" (x) \ + : "m" (__m(addr)) \ + ); \ +} while (0) +#endif /* CONFIG_MMU */ + +extern void __get_user_unknown(void); + +#define __put_user_size(x,ptr,size,retval) \ +do { \ + retval = 0; \ + switch (size) { \ + case 1: \ + __put_user_asm(x, ptr, retval, "b"); \ + break; \ + case 2: \ + __put_user_asm(x, ptr, retval, "w"); \ + break; \ + case 4: \ + __put_user_asm(x, ptr, retval, "l"); \ + break; \ + case 8: \ + __put_user_u64(x, ptr, retval); \ + break; \ + default: \ + __put_user_unknown(); \ + } \ +} while (0) + +#ifdef CONFIG_MMU +#define __put_user_asm(x, addr, err, insn) \ +do { \ + __asm__ __volatile__ ( \ + "1:\n\t" \ + "mov." insn " %1, %2\n\t" \ + "2:\n" \ + ".section .fixup,\"ax\"\n" \ + "3:\n\t" \ + "mov.l 4f, %0\n\t" \ + "jmp @%0\n\t" \ + " mov %3, %0\n\t" \ + ".balign 4\n" \ + "4: .long 2b\n\t" \ + ".previous\n" \ + ".section __ex_table,\"a\"\n\t" \ + ".long 1b, 3b\n\t" \ + ".previous" \ + : "=&r" (err) \ + : "r" (x), "m" (__m(addr)), "i" (-EFAULT), \ + "0" (err) \ + : "memory" \ + ); \ +} while (0) +#else +#define __put_user_asm(x, addr, err, insn) \ +do { \ + __asm__ __volatile__ ( \ + "mov." insn " %0, %1\n\t" \ + : /* no outputs */ \ + : "r" (x), "m" (__m(addr)) \ + : "memory" \ + ); \ +} while (0) +#endif /* CONFIG_MMU */ + +#if defined(CONFIG_CPU_LITTLE_ENDIAN) +#define __put_user_u64(val,addr,retval) \ +({ \ +__asm__ __volatile__( \ + "1:\n\t" \ + "mov.l %R1,%2\n\t" \ + "mov.l %S1,%T2\n\t" \ + "2:\n" \ + ".section .fixup,\"ax\"\n" \ + "3:\n\t" \ + "mov.l 4f,%0\n\t" \ + "jmp @%0\n\t" \ + " mov %3,%0\n\t" \ + ".balign 4\n" \ + "4: .long 2b\n\t" \ + ".previous\n" \ + ".section __ex_table,\"a\"\n\t" \ + ".long 1b, 3b\n\t" \ + ".previous" \ + : "=r" (retval) \ + : "r" (val), "m" (__m(addr)), "i" (-EFAULT), "0" (retval) \ + : "memory"); }) +#else +#define __put_user_u64(val,addr,retval) \ +({ \ +__asm__ __volatile__( \ + "1:\n\t" \ + "mov.l %S1,%2\n\t" \ + "mov.l %R1,%T2\n\t" \ + "2:\n" \ + ".section .fixup,\"ax\"\n" \ + "3:\n\t" \ + "mov.l 4f,%0\n\t" \ + "jmp @%0\n\t" \ + " mov %3,%0\n\t" \ + ".balign 4\n" \ + "4: .long 2b\n\t" \ + ".previous\n" \ + ".section __ex_table,\"a\"\n\t" \ + ".long 1b, 3b\n\t" \ + ".previous" \ + : "=r" (retval) \ + : "r" (val), "m" (__m(addr)), "i" (-EFAULT), "0" (retval) \ + : "memory"); }) +#endif + +extern void __put_user_unknown(void); + +static inline int +__strncpy_from_user(unsigned long __dest, unsigned long __user __src, int __count) +{ + __kernel_size_t res; + unsigned long __dummy, _d, _s, _c; + + __asm__ __volatile__( + "9:\n" + "mov.b @%2+, %1\n\t" + "cmp/eq #0, %1\n\t" + "bt/s 2f\n" + "1:\n" + "mov.b %1, @%3\n\t" + "dt %4\n\t" + "bf/s 9b\n\t" + " add #1, %3\n\t" + "2:\n\t" + "sub %4, %0\n" + "3:\n" + ".section .fixup,\"ax\"\n" + "4:\n\t" + "mov.l 5f, %1\n\t" + "jmp @%1\n\t" + " mov %9, %0\n\t" + ".balign 4\n" + "5: .long 3b\n" + ".previous\n" + ".section __ex_table,\"a\"\n" + " .balign 4\n" + " .long 9b,4b\n" + ".previous" + : "=r" (res), "=&z" (__dummy), "=r" (_s), "=r" (_d), "=r"(_c) + : "0" (__count), "2" (__src), "3" (__dest), "4" (__count), + "i" (-EFAULT) + : "memory", "t"); + + return res; +} + +/* + * Return the size of a string (including the ending 0 even when we have + * exceeded the maximum string length). + */ +static inline long __strnlen_user(const char __user *__s, long __n) +{ + unsigned long res; + unsigned long __dummy; + + __asm__ __volatile__( + "1:\t" + "mov.b @(%0,%3), %1\n\t" + "cmp/eq %4, %0\n\t" + "bt/s 2f\n\t" + " add #1, %0\n\t" + "tst %1, %1\n\t" + "bf 1b\n\t" + "2:\n" + ".section .fixup,\"ax\"\n" + "3:\n\t" + "mov.l 4f, %1\n\t" + "jmp @%1\n\t" + " mov #0, %0\n" + ".balign 4\n" + "4: .long 2b\n" + ".previous\n" + ".section __ex_table,\"a\"\n" + " .balign 4\n" + " .long 1b,3b\n" + ".previous" + : "=z" (res), "=&r" (__dummy) + : "0" (0), "r" (__s), "r" (__n) + : "t"); + return res; +} + +#endif /* __ASM_SH_UACCESS_32_H */ diff --git a/arch/sh/include/asm/uaccess_64.h b/arch/sh/include/asm/uaccess_64.h new file mode 100644 index 000000000000..81b3d515fcb3 --- /dev/null +++ b/arch/sh/include/asm/uaccess_64.h @@ -0,0 +1,79 @@ +#ifndef __ASM_SH_UACCESS_64_H +#define __ASM_SH_UACCESS_64_H + +/* + * include/asm-sh/uaccess_64.h + * + * Copyright (C) 2000, 2001 Paolo Alberelli + * Copyright (C) 2003, 2004 Paul Mundt + * + * User space memory access functions + * + * Copyright (C) 1999 Niibe Yutaka + * + * Based on: + * MIPS implementation version 1.15 by + * Copyright (C) 1996, 1997, 1998 by Ralf Baechle + * and i386 version. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#define __get_user_size(x,ptr,size,retval) \ +do { \ + retval = 0; \ + switch (size) { \ + case 1: \ + retval = __get_user_asm_b(x, ptr); \ + break; \ + case 2: \ + retval = __get_user_asm_w(x, ptr); \ + break; \ + case 4: \ + retval = __get_user_asm_l(x, ptr); \ + break; \ + case 8: \ + retval = __get_user_asm_q(x, ptr); \ + break; \ + default: \ + __get_user_unknown(); \ + break; \ + } \ +} while (0) + +extern long __get_user_asm_b(void *, long); +extern long __get_user_asm_w(void *, long); +extern long __get_user_asm_l(void *, long); +extern long __get_user_asm_q(void *, long); +extern void __get_user_unknown(void); + +#define __put_user_size(x,ptr,size,retval) \ +do { \ + retval = 0; \ + switch (size) { \ + case 1: \ + retval = __put_user_asm_b(x, ptr); \ + break; \ + case 2: \ + retval = __put_user_asm_w(x, ptr); \ + break; \ + case 4: \ + retval = __put_user_asm_l(x, ptr); \ + break; \ + case 8: \ + retval = __put_user_asm_q(x, ptr); \ + break; \ + default: \ + __put_user_unknown(); \ + } \ +} while (0) + +extern long __put_user_asm_b(void *, long); +extern long __put_user_asm_w(void *, long); +extern long __put_user_asm_l(void *, long); +extern long __put_user_asm_q(void *, long); +extern void __put_user_unknown(void); + +#endif /* __ASM_SH_UACCESS_64_H */ diff --git a/arch/sh/include/asm/ubc.h b/arch/sh/include/asm/ubc.h new file mode 100644 index 000000000000..a7b9028bbfbb --- /dev/null +++ b/arch/sh/include/asm/ubc.h @@ -0,0 +1,64 @@ +/* + * include/asm-sh/ubc.h + * + * Copyright (C) 1999 Niibe Yutaka + * Copyright (C) 2002, 2003 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_SH_UBC_H +#define __ASM_SH_UBC_H +#ifdef __KERNEL__ + +#include <cpu/ubc.h> + +/* User Break Controller */ +#if defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7709) +#define UBC_TYPE_SH7729 (current_cpu_data.type == CPU_SH7729) +#else +#define UBC_TYPE_SH7729 0 +#endif + +#define BAMR_ASID (1 << 2) +#define BAMR_NONE 0 +#define BAMR_10 0x1 +#define BAMR_12 0x2 +#define BAMR_ALL 0x3 +#define BAMR_16 0x8 +#define BAMR_20 0x9 + +#define BBR_INST (1 << 4) +#define BBR_DATA (2 << 4) +#define BBR_READ (1 << 2) +#define BBR_WRITE (2 << 2) +#define BBR_BYTE 0x1 +#define BBR_HALF 0x2 +#define BBR_LONG 0x3 +#define BBR_QUAD (1 << 6) /* SH7750 */ +#define BBR_CPU (1 << 6) /* SH7709A,SH7729 */ +#define BBR_DMA (2 << 6) /* SH7709A,SH7729 */ + +#define BRCR_CMFA (1 << 15) +#define BRCR_CMFB (1 << 14) +#define BRCR_PCTE (1 << 11) +#define BRCR_PCBA (1 << 10) /* 1: after execution */ +#define BRCR_DBEB (1 << 7) +#define BRCR_PCBB (1 << 6) +#define BRCR_SEQ (1 << 3) +#define BRCR_UBDE (1 << 0) + +#ifndef __ASSEMBLY__ +/* arch/sh/kernel/cpu/ubc.S */ +extern void ubc_sleep(void); + +#ifdef CONFIG_UBC_WAKEUP +extern void ubc_wakeup(void); +#else +#define ubc_wakeup() do { } while (0) +#endif +#endif + +#endif /* __KERNEL__ */ +#endif /* __ASM_SH_UBC_H */ diff --git a/arch/sh/include/asm/ucontext.h b/arch/sh/include/asm/ucontext.h new file mode 100644 index 000000000000..202ef1d5a3c4 --- /dev/null +++ b/arch/sh/include/asm/ucontext.h @@ -0,0 +1,12 @@ +#ifndef __ASM_SH_UCONTEXT_H +#define __ASM_SH_UCONTEXT_H + +struct ucontext { + unsigned long uc_flags; + struct ucontext *uc_link; + stack_t uc_stack; + struct sigcontext uc_mcontext; + sigset_t uc_sigmask; /* mask last for extensibility */ +}; + +#endif /* __ASM_SH_UCONTEXT_H */ diff --git a/arch/sh/include/asm/unaligned.h b/arch/sh/include/asm/unaligned.h new file mode 100644 index 000000000000..c1641a01d50f --- /dev/null +++ b/arch/sh/include/asm/unaligned.h @@ -0,0 +1,19 @@ +#ifndef _ASM_SH_UNALIGNED_H +#define _ASM_SH_UNALIGNED_H + +/* SH can't handle unaligned accesses. */ +#ifdef __LITTLE_ENDIAN__ +# include <linux/unaligned/le_struct.h> +# include <linux/unaligned/be_byteshift.h> +# include <linux/unaligned/generic.h> +# define get_unaligned __get_unaligned_le +# define put_unaligned __put_unaligned_le +#else +# include <linux/unaligned/be_struct.h> +# include <linux/unaligned/le_byteshift.h> +# include <linux/unaligned/generic.h> +# define get_unaligned __get_unaligned_be +# define put_unaligned __put_unaligned_be +#endif + +#endif /* _ASM_SH_UNALIGNED_H */ diff --git a/arch/sh/include/asm/unistd.h b/arch/sh/include/asm/unistd.h new file mode 100644 index 000000000000..65be656ead7d --- /dev/null +++ b/arch/sh/include/asm/unistd.h @@ -0,0 +1,13 @@ +#ifdef __KERNEL__ +# ifdef CONFIG_SUPERH32 +# include "unistd_32.h" +# else +# include "unistd_64.h" +# endif +#else +# ifdef __SH5__ +# include "unistd_64.h" +# else +# include "unistd_32.h" +# endif +#endif diff --git a/arch/sh/include/asm/unistd_32.h b/arch/sh/include/asm/unistd_32.h new file mode 100644 index 000000000000..d52c000cf924 --- /dev/null +++ b/arch/sh/include/asm/unistd_32.h @@ -0,0 +1,384 @@ +#ifndef __ASM_SH_UNISTD_H +#define __ASM_SH_UNISTD_H + +/* + * Copyright (C) 1999 Niibe Yutaka + */ + +/* + * This file contains the system call numbers. + */ + +#define __NR_restart_syscall 0 +#define __NR_exit 1 +#define __NR_fork 2 +#define __NR_read 3 +#define __NR_write 4 +#define __NR_open 5 +#define __NR_close 6 +#define __NR_waitpid 7 +#define __NR_creat 8 +#define __NR_link 9 +#define __NR_unlink 10 +#define __NR_execve 11 +#define __NR_chdir 12 +#define __NR_time 13 +#define __NR_mknod 14 +#define __NR_chmod 15 +#define __NR_lchown 16 +#define __NR_break 17 +#define __NR_oldstat 18 +#define __NR_lseek 19 +#define __NR_getpid 20 +#define __NR_mount 21 +#define __NR_umount 22 +#define __NR_setuid 23 +#define __NR_getuid 24 +#define __NR_stime 25 +#define __NR_ptrace 26 +#define __NR_alarm 27 +#define __NR_oldfstat 28 +#define __NR_pause 29 +#define __NR_utime 30 +#define __NR_stty 31 +#define __NR_gtty 32 +#define __NR_access 33 +#define __NR_nice 34 +#define __NR_ftime 35 +#define __NR_sync 36 +#define __NR_kill 37 +#define __NR_rename 38 +#define __NR_mkdir 39 +#define __NR_rmdir 40 +#define __NR_dup 41 +#define __NR_pipe 42 +#define __NR_times 43 +#define __NR_prof 44 +#define __NR_brk 45 +#define __NR_setgid 46 +#define __NR_getgid 47 +#define __NR_signal 48 +#define __NR_geteuid 49 +#define __NR_getegid 50 +#define __NR_acct 51 +#define __NR_umount2 52 +#define __NR_lock 53 +#define __NR_ioctl 54 +#define __NR_fcntl 55 +#define __NR_mpx 56 +#define __NR_setpgid 57 +#define __NR_ulimit 58 +#define __NR_oldolduname 59 +#define __NR_umask 60 +#define __NR_chroot 61 +#define __NR_ustat 62 +#define __NR_dup2 63 +#define __NR_getppid 64 +#define __NR_getpgrp 65 +#define __NR_setsid 66 +#define __NR_sigaction 67 +#define __NR_sgetmask 68 +#define __NR_ssetmask 69 +#define __NR_setreuid 70 +#define __NR_setregid 71 +#define __NR_sigsuspend 72 +#define __NR_sigpending 73 +#define __NR_sethostname 74 +#define __NR_setrlimit 75 +#define __NR_getrlimit 76 /* Back compatible 2Gig limited rlimit */ +#define __NR_getrusage 77 +#define __NR_gettimeofday 78 +#define __NR_settimeofday 79 +#define __NR_getgroups 80 +#define __NR_setgroups 81 +#define __NR_select 82 +#define __NR_symlink 83 +#define __NR_oldlstat 84 +#define __NR_readlink 85 +#define __NR_uselib 86 +#define __NR_swapon 87 +#define __NR_reboot 88 +#define __NR_readdir 89 +#define __NR_mmap 90 +#define __NR_munmap 91 +#define __NR_truncate 92 +#define __NR_ftruncate 93 +#define __NR_fchmod 94 +#define __NR_fchown 95 +#define __NR_getpriority 96 +#define __NR_setpriority 97 +#define __NR_profil 98 +#define __NR_statfs 99 +#define __NR_fstatfs 100 +#define __NR_ioperm 101 +#define __NR_socketcall 102 +#define __NR_syslog 103 +#define __NR_setitimer 104 +#define __NR_getitimer 105 +#define __NR_stat 106 +#define __NR_lstat 107 +#define __NR_fstat 108 +#define __NR_olduname 109 +#define __NR_iopl 110 +#define __NR_vhangup 111 +#define __NR_idle 112 +#define __NR_vm86old 113 +#define __NR_wait4 114 +#define __NR_swapoff 115 +#define __NR_sysinfo 116 +#define __NR_ipc 117 +#define __NR_fsync 118 +#define __NR_sigreturn 119 +#define __NR_clone 120 +#define __NR_setdomainname 121 +#define __NR_uname 122 +#define __NR_modify_ldt 123 +#define __NR_adjtimex 124 +#define __NR_mprotect 125 +#define __NR_sigprocmask 126 +#define __NR_create_module 127 +#define __NR_init_module 128 +#define __NR_delete_module 129 +#define __NR_get_kernel_syms 130 +#define __NR_quotactl 131 +#define __NR_getpgid 132 +#define __NR_fchdir 133 +#define __NR_bdflush 134 +#define __NR_sysfs 135 +#define __NR_personality 136 +#define __NR_afs_syscall 137 /* Syscall for Andrew File System */ +#define __NR_setfsuid 138 +#define __NR_setfsgid 139 +#define __NR__llseek 140 +#define __NR_getdents 141 +#define __NR__newselect 142 +#define __NR_flock 143 +#define __NR_msync 144 +#define __NR_readv 145 +#define __NR_writev 146 +#define __NR_getsid 147 +#define __NR_fdatasync 148 +#define __NR__sysctl 149 +#define __NR_mlock 150 +#define __NR_munlock 151 +#define __NR_mlockall 152 +#define __NR_munlockall 153 +#define __NR_sched_setparam 154 +#define __NR_sched_getparam 155 +#define __NR_sched_setscheduler 156 +#define __NR_sched_getscheduler 157 +#define __NR_sched_yield 158 +#define __NR_sched_get_priority_max 159 +#define __NR_sched_get_priority_min 160 +#define __NR_sched_rr_get_interval 161 +#define __NR_nanosleep 162 +#define __NR_mremap 163 +#define __NR_setresuid 164 +#define __NR_getresuid 165 +#define __NR_vm86 166 +#define __NR_query_module 167 +#define __NR_poll 168 +#define __NR_nfsservctl 169 +#define __NR_setresgid 170 +#define __NR_getresgid 171 +#define __NR_prctl 172 +#define __NR_rt_sigreturn 173 +#define __NR_rt_sigaction 174 +#define __NR_rt_sigprocmask 175 +#define __NR_rt_sigpending 176 +#define __NR_rt_sigtimedwait 177 +#define __NR_rt_sigqueueinfo 178 +#define __NR_rt_sigsuspend 179 +#define __NR_pread64 180 +#define __NR_pwrite64 181 +#define __NR_chown 182 +#define __NR_getcwd 183 +#define __NR_capget 184 +#define __NR_capset 185 +#define __NR_sigaltstack 186 +#define __NR_sendfile 187 +#define __NR_streams1 188 /* some people actually want it */ +#define __NR_streams2 189 /* some people actually want it */ +#define __NR_vfork 190 +#define __NR_ugetrlimit 191 /* SuS compliant getrlimit */ +#define __NR_mmap2 192 +#define __NR_truncate64 193 +#define __NR_ftruncate64 194 +#define __NR_stat64 195 +#define __NR_lstat64 196 +#define __NR_fstat64 197 +#define __NR_lchown32 198 +#define __NR_getuid32 199 +#define __NR_getgid32 200 +#define __NR_geteuid32 201 +#define __NR_getegid32 202 +#define __NR_setreuid32 203 +#define __NR_setregid32 204 +#define __NR_getgroups32 205 +#define __NR_setgroups32 206 +#define __NR_fchown32 207 +#define __NR_setresuid32 208 +#define __NR_getresuid32 209 +#define __NR_setresgid32 210 +#define __NR_getresgid32 211 +#define __NR_chown32 212 +#define __NR_setuid32 213 +#define __NR_setgid32 214 +#define __NR_setfsuid32 215 +#define __NR_setfsgid32 216 +#define __NR_pivot_root 217 +#define __NR_mincore 218 +#define __NR_madvise 219 +#define __NR_getdents64 220 +#define __NR_fcntl64 221 +/* 223 is unused */ +#define __NR_gettid 224 +#define __NR_readahead 225 +#define __NR_setxattr 226 +#define __NR_lsetxattr 227 +#define __NR_fsetxattr 228 +#define __NR_getxattr 229 +#define __NR_lgetxattr 230 +#define __NR_fgetxattr 231 +#define __NR_listxattr 232 +#define __NR_llistxattr 233 +#define __NR_flistxattr 234 +#define __NR_removexattr 235 +#define __NR_lremovexattr 236 +#define __NR_fremovexattr 237 +#define __NR_tkill 238 +#define __NR_sendfile64 239 +#define __NR_futex 240 +#define __NR_sched_setaffinity 241 +#define __NR_sched_getaffinity 242 +#define __NR_set_thread_area 243 +#define __NR_get_thread_area 244 +#define __NR_io_setup 245 +#define __NR_io_destroy 246 +#define __NR_io_getevents 247 +#define __NR_io_submit 248 +#define __NR_io_cancel 249 +#define __NR_fadvise64 250 + +#define __NR_exit_group 252 +#define __NR_lookup_dcookie 253 +#define __NR_epoll_create 254 +#define __NR_epoll_ctl 255 +#define __NR_epoll_wait 256 +#define __NR_remap_file_pages 257 +#define __NR_set_tid_address 258 +#define __NR_timer_create 259 +#define __NR_timer_settime (__NR_timer_create+1) +#define __NR_timer_gettime (__NR_timer_create+2) +#define __NR_timer_getoverrun (__NR_timer_create+3) +#define __NR_timer_delete (__NR_timer_create+4) +#define __NR_clock_settime (__NR_timer_create+5) +#define __NR_clock_gettime (__NR_timer_create+6) +#define __NR_clock_getres (__NR_timer_create+7) +#define __NR_clock_nanosleep (__NR_timer_create+8) +#define __NR_statfs64 268 +#define __NR_fstatfs64 269 +#define __NR_tgkill 270 +#define __NR_utimes 271 +#define __NR_fadvise64_64 272 +#define __NR_vserver 273 +#define __NR_mbind 274 +#define __NR_get_mempolicy 275 +#define __NR_set_mempolicy 276 +#define __NR_mq_open 277 +#define __NR_mq_unlink (__NR_mq_open+1) +#define __NR_mq_timedsend (__NR_mq_open+2) +#define __NR_mq_timedreceive (__NR_mq_open+3) +#define __NR_mq_notify (__NR_mq_open+4) +#define __NR_mq_getsetattr (__NR_mq_open+5) +#define __NR_kexec_load 283 +#define __NR_waitid 284 +#define __NR_add_key 285 +#define __NR_request_key 286 +#define __NR_keyctl 287 +#define __NR_ioprio_set 288 +#define __NR_ioprio_get 289 +#define __NR_inotify_init 290 +#define __NR_inotify_add_watch 291 +#define __NR_inotify_rm_watch 292 +/* 293 is unused */ +#define __NR_migrate_pages 294 +#define __NR_openat 295 +#define __NR_mkdirat 296 +#define __NR_mknodat 297 +#define __NR_fchownat 298 +#define __NR_futimesat 299 +#define __NR_fstatat64 300 +#define __NR_unlinkat 301 +#define __NR_renameat 302 +#define __NR_linkat 303 +#define __NR_symlinkat 304 +#define __NR_readlinkat 305 +#define __NR_fchmodat 306 +#define __NR_faccessat 307 +#define __NR_pselect6 308 +#define __NR_ppoll 309 +#define __NR_unshare 310 +#define __NR_set_robust_list 311 +#define __NR_get_robust_list 312 +#define __NR_splice 313 +#define __NR_sync_file_range 314 +#define __NR_tee 315 +#define __NR_vmsplice 316 +#define __NR_move_pages 317 +#define __NR_getcpu 318 +#define __NR_epoll_pwait 319 +#define __NR_utimensat 320 +#define __NR_signalfd 321 +#define __NR_timerfd_create 322 +#define __NR_eventfd 323 +#define __NR_fallocate 324 +#define __NR_timerfd_settime 325 +#define __NR_timerfd_gettime 326 +#define __NR_signalfd4 327 +#define __NR_eventfd2 328 +#define __NR_epoll_create1 329 +#define __NR_dup3 330 +#define __NR_pipe2 331 +#define __NR_inotify_init1 332 + +#define NR_syscalls 333 + +#ifdef __KERNEL__ + +#define __ARCH_WANT_IPC_PARSE_VERSION +#define __ARCH_WANT_OLD_READDIR +#define __ARCH_WANT_OLD_STAT +#define __ARCH_WANT_STAT64 +#define __ARCH_WANT_SYS_ALARM +#define __ARCH_WANT_SYS_GETHOSTNAME +#define __ARCH_WANT_SYS_PAUSE +#define __ARCH_WANT_SYS_SGETMASK +#define __ARCH_WANT_SYS_SIGNAL +#define __ARCH_WANT_SYS_TIME +#define __ARCH_WANT_SYS_UTIME +#define __ARCH_WANT_SYS_WAITPID +#define __ARCH_WANT_SYS_SOCKETCALL +#define __ARCH_WANT_SYS_FADVISE64 +#define __ARCH_WANT_SYS_GETPGRP +#define __ARCH_WANT_SYS_LLSEEK +#define __ARCH_WANT_SYS_NICE +#define __ARCH_WANT_SYS_OLD_GETRLIMIT +#define __ARCH_WANT_SYS_OLDUMOUNT +#define __ARCH_WANT_SYS_SIGPENDING +#define __ARCH_WANT_SYS_SIGPROCMASK +#define __ARCH_WANT_SYS_RT_SIGACTION +#define __ARCH_WANT_SYS_RT_SIGSUSPEND + +/* + * "Conditional" syscalls + * + * What we want is __attribute__((weak,alias("sys_ni_syscall"))), + * but it doesn't work on all toolchains, so we just do it by hand + */ +#ifndef cond_syscall +#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall") +#endif + +#endif /* __KERNEL__ */ +#endif /* __ASM_SH_UNISTD_H */ diff --git a/arch/sh/include/asm/unistd_64.h b/arch/sh/include/asm/unistd_64.h new file mode 100644 index 000000000000..7c54e91753c1 --- /dev/null +++ b/arch/sh/include/asm/unistd_64.h @@ -0,0 +1,423 @@ +#ifndef __ASM_SH_UNISTD_64_H +#define __ASM_SH_UNISTD_64_H + +/* + * include/asm-sh/unistd_64.h + * + * This file contains the system call numbers. + * + * Copyright (C) 2000, 2001 Paolo Alberelli + * Copyright (C) 2003 - 2007 Paul Mundt + * Copyright (C) 2004 Sean McGoogan + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#define __NR_restart_syscall 0 +#define __NR_exit 1 +#define __NR_fork 2 +#define __NR_read 3 +#define __NR_write 4 +#define __NR_open 5 +#define __NR_close 6 +#define __NR_waitpid 7 +#define __NR_creat 8 +#define __NR_link 9 +#define __NR_unlink 10 +#define __NR_execve 11 +#define __NR_chdir 12 +#define __NR_time 13 +#define __NR_mknod 14 +#define __NR_chmod 15 +#define __NR_lchown 16 +#define __NR_break 17 +#define __NR_oldstat 18 +#define __NR_lseek 19 +#define __NR_getpid 20 +#define __NR_mount 21 +#define __NR_umount 22 +#define __NR_setuid 23 +#define __NR_getuid 24 +#define __NR_stime 25 +#define __NR_ptrace 26 +#define __NR_alarm 27 +#define __NR_oldfstat 28 +#define __NR_pause 29 +#define __NR_utime 30 +#define __NR_stty 31 +#define __NR_gtty 32 +#define __NR_access 33 +#define __NR_nice 34 +#define __NR_ftime 35 +#define __NR_sync 36 +#define __NR_kill 37 +#define __NR_rename 38 +#define __NR_mkdir 39 +#define __NR_rmdir 40 +#define __NR_dup 41 +#define __NR_pipe 42 +#define __NR_times 43 +#define __NR_prof 44 +#define __NR_brk 45 +#define __NR_setgid 46 +#define __NR_getgid 47 +#define __NR_signal 48 +#define __NR_geteuid 49 +#define __NR_getegid 50 +#define __NR_acct 51 +#define __NR_umount2 52 +#define __NR_lock 53 +#define __NR_ioctl 54 +#define __NR_fcntl 55 +#define __NR_mpx 56 +#define __NR_setpgid 57 +#define __NR_ulimit 58 +#define __NR_oldolduname 59 +#define __NR_umask 60 +#define __NR_chroot 61 +#define __NR_ustat 62 +#define __NR_dup2 63 +#define __NR_getppid 64 +#define __NR_getpgrp 65 +#define __NR_setsid 66 +#define __NR_sigaction 67 +#define __NR_sgetmask 68 +#define __NR_ssetmask 69 +#define __NR_setreuid 70 +#define __NR_setregid 71 +#define __NR_sigsuspend 72 +#define __NR_sigpending 73 +#define __NR_sethostname 74 +#define __NR_setrlimit 75 +#define __NR_getrlimit 76 /* Back compatible 2Gig limited rlimit */ +#define __NR_getrusage 77 +#define __NR_gettimeofday 78 +#define __NR_settimeofday 79 +#define __NR_getgroups 80 +#define __NR_setgroups 81 +#define __NR_select 82 +#define __NR_symlink 83 +#define __NR_oldlstat 84 +#define __NR_readlink 85 +#define __NR_uselib 86 +#define __NR_swapon 87 +#define __NR_reboot 88 +#define __NR_readdir 89 +#define __NR_mmap 90 +#define __NR_munmap 91 +#define __NR_truncate 92 +#define __NR_ftruncate 93 +#define __NR_fchmod 94 +#define __NR_fchown 95 +#define __NR_getpriority 96 +#define __NR_setpriority 97 +#define __NR_profil 98 +#define __NR_statfs 99 +#define __NR_fstatfs 100 +#define __NR_ioperm 101 +#define __NR_socketcall 102 /* old implementation of socket systemcall */ +#define __NR_syslog 103 +#define __NR_setitimer 104 +#define __NR_getitimer 105 +#define __NR_stat 106 +#define __NR_lstat 107 +#define __NR_fstat 108 +#define __NR_olduname 109 +#define __NR_iopl 110 +#define __NR_vhangup 111 +#define __NR_idle 112 +#define __NR_vm86old 113 +#define __NR_wait4 114 +#define __NR_swapoff 115 +#define __NR_sysinfo 116 +#define __NR_ipc 117 +#define __NR_fsync 118 +#define __NR_sigreturn 119 +#define __NR_clone 120 +#define __NR_setdomainname 121 +#define __NR_uname 122 +#define __NR_modify_ldt 123 +#define __NR_adjtimex 124 +#define __NR_mprotect 125 +#define __NR_sigprocmask 126 +#define __NR_create_module 127 +#define __NR_init_module 128 +#define __NR_delete_module 129 +#define __NR_get_kernel_syms 130 +#define __NR_quotactl 131 +#define __NR_getpgid 132 +#define __NR_fchdir 133 +#define __NR_bdflush 134 +#define __NR_sysfs 135 +#define __NR_personality 136 +#define __NR_afs_syscall 137 /* Syscall for Andrew File System */ +#define __NR_setfsuid 138 +#define __NR_setfsgid 139 +#define __NR__llseek 140 +#define __NR_getdents 141 +#define __NR__newselect 142 +#define __NR_flock 143 +#define __NR_msync 144 +#define __NR_readv 145 +#define __NR_writev 146 +#define __NR_getsid 147 +#define __NR_fdatasync 148 +#define __NR__sysctl 149 +#define __NR_mlock 150 +#define __NR_munlock 151 +#define __NR_mlockall 152 +#define __NR_munlockall 153 +#define __NR_sched_setparam 154 +#define __NR_sched_getparam 155 +#define __NR_sched_setscheduler 156 +#define __NR_sched_getscheduler 157 +#define __NR_sched_yield 158 +#define __NR_sched_get_priority_max 159 +#define __NR_sched_get_priority_min 160 +#define __NR_sched_rr_get_interval 161 +#define __NR_nanosleep 162 +#define __NR_mremap 163 +#define __NR_setresuid 164 +#define __NR_getresuid 165 +#define __NR_vm86 166 +#define __NR_query_module 167 +#define __NR_poll 168 +#define __NR_nfsservctl 169 +#define __NR_setresgid 170 +#define __NR_getresgid 171 +#define __NR_prctl 172 +#define __NR_rt_sigreturn 173 +#define __NR_rt_sigaction 174 +#define __NR_rt_sigprocmask 175 +#define __NR_rt_sigpending 176 +#define __NR_rt_sigtimedwait 177 +#define __NR_rt_sigqueueinfo 178 +#define __NR_rt_sigsuspend 179 +#define __NR_pread64 180 +#define __NR_pwrite64 181 +#define __NR_chown 182 +#define __NR_getcwd 183 +#define __NR_capget 184 +#define __NR_capset 185 +#define __NR_sigaltstack 186 +#define __NR_sendfile 187 +#define __NR_streams1 188 /* some people actually want it */ +#define __NR_streams2 189 /* some people actually want it */ +#define __NR_vfork 190 +#define __NR_ugetrlimit 191 /* SuS compliant getrlimit */ +#define __NR_mmap2 192 +#define __NR_truncate64 193 +#define __NR_ftruncate64 194 +#define __NR_stat64 195 +#define __NR_lstat64 196 +#define __NR_fstat64 197 +#define __NR_lchown32 198 +#define __NR_getuid32 199 +#define __NR_getgid32 200 +#define __NR_geteuid32 201 +#define __NR_getegid32 202 +#define __NR_setreuid32 203 +#define __NR_setregid32 204 +#define __NR_getgroups32 205 +#define __NR_setgroups32 206 +#define __NR_fchown32 207 +#define __NR_setresuid32 208 +#define __NR_getresuid32 209 +#define __NR_setresgid32 210 +#define __NR_getresgid32 211 +#define __NR_chown32 212 +#define __NR_setuid32 213 +#define __NR_setgid32 214 +#define __NR_setfsuid32 215 +#define __NR_setfsgid32 216 +#define __NR_pivot_root 217 +#define __NR_mincore 218 +#define __NR_madvise 219 + +/* Non-multiplexed socket family */ +#define __NR_socket 220 +#define __NR_bind 221 +#define __NR_connect 222 +#define __NR_listen 223 +#define __NR_accept 224 +#define __NR_getsockname 225 +#define __NR_getpeername 226 +#define __NR_socketpair 227 +#define __NR_send 228 +#define __NR_sendto 229 +#define __NR_recv 230 +#define __NR_recvfrom 231 +#define __NR_shutdown 232 +#define __NR_setsockopt 233 +#define __NR_getsockopt 234 +#define __NR_sendmsg 235 +#define __NR_recvmsg 236 + +/* Non-multiplexed IPC family */ +#define __NR_semop 237 +#define __NR_semget 238 +#define __NR_semctl 239 +#define __NR_msgsnd 240 +#define __NR_msgrcv 241 +#define __NR_msgget 242 +#define __NR_msgctl 243 +#if 0 +#define __NR_shmatcall 244 +#endif +#define __NR_shmdt 245 +#define __NR_shmget 246 +#define __NR_shmctl 247 + +#define __NR_getdents64 248 +#define __NR_fcntl64 249 +/* 223 is unused */ +#define __NR_gettid 252 +#define __NR_readahead 253 +#define __NR_setxattr 254 +#define __NR_lsetxattr 255 +#define __NR_fsetxattr 256 +#define __NR_getxattr 257 +#define __NR_lgetxattr 258 +#define __NR_fgetxattr 269 +#define __NR_listxattr 260 +#define __NR_llistxattr 261 +#define __NR_flistxattr 262 +#define __NR_removexattr 263 +#define __NR_lremovexattr 264 +#define __NR_fremovexattr 265 +#define __NR_tkill 266 +#define __NR_sendfile64 267 +#define __NR_futex 268 +#define __NR_sched_setaffinity 269 +#define __NR_sched_getaffinity 270 +#define __NR_set_thread_area 271 +#define __NR_get_thread_area 272 +#define __NR_io_setup 273 +#define __NR_io_destroy 274 +#define __NR_io_getevents 275 +#define __NR_io_submit 276 +#define __NR_io_cancel 277 +#define __NR_fadvise64 278 +#define __NR_exit_group 280 + +#define __NR_lookup_dcookie 281 +#define __NR_epoll_create 282 +#define __NR_epoll_ctl 283 +#define __NR_epoll_wait 284 +#define __NR_remap_file_pages 285 +#define __NR_set_tid_address 286 +#define __NR_timer_create 287 +#define __NR_timer_settime (__NR_timer_create+1) +#define __NR_timer_gettime (__NR_timer_create+2) +#define __NR_timer_getoverrun (__NR_timer_create+3) +#define __NR_timer_delete (__NR_timer_create+4) +#define __NR_clock_settime (__NR_timer_create+5) +#define __NR_clock_gettime (__NR_timer_create+6) +#define __NR_clock_getres (__NR_timer_create+7) +#define __NR_clock_nanosleep (__NR_timer_create+8) +#define __NR_statfs64 296 +#define __NR_fstatfs64 297 +#define __NR_tgkill 298 +#define __NR_utimes 299 +#define __NR_fadvise64_64 300 +#define __NR_vserver 301 +#define __NR_mbind 302 +#define __NR_get_mempolicy 303 +#define __NR_set_mempolicy 304 +#define __NR_mq_open 305 +#define __NR_mq_unlink (__NR_mq_open+1) +#define __NR_mq_timedsend (__NR_mq_open+2) +#define __NR_mq_timedreceive (__NR_mq_open+3) +#define __NR_mq_notify (__NR_mq_open+4) +#define __NR_mq_getsetattr (__NR_mq_open+5) +#define __NR_kexec_load 311 +#define __NR_waitid 312 +#define __NR_add_key 313 +#define __NR_request_key 314 +#define __NR_keyctl 315 +#define __NR_ioprio_set 316 +#define __NR_ioprio_get 317 +#define __NR_inotify_init 318 +#define __NR_inotify_add_watch 319 +#define __NR_inotify_rm_watch 320 +/* 321 is unused */ +#define __NR_migrate_pages 322 +#define __NR_openat 323 +#define __NR_mkdirat 324 +#define __NR_mknodat 325 +#define __NR_fchownat 326 +#define __NR_futimesat 327 +#define __NR_fstatat64 328 +#define __NR_unlinkat 329 +#define __NR_renameat 330 +#define __NR_linkat 331 +#define __NR_symlinkat 332 +#define __NR_readlinkat 333 +#define __NR_fchmodat 334 +#define __NR_faccessat 335 +#define __NR_pselect6 336 +#define __NR_ppoll 337 +#define __NR_unshare 338 +#define __NR_set_robust_list 339 +#define __NR_get_robust_list 340 +#define __NR_splice 341 +#define __NR_sync_file_range 342 +#define __NR_tee 343 +#define __NR_vmsplice 344 +#define __NR_move_pages 345 +#define __NR_getcpu 346 +#define __NR_epoll_pwait 347 +#define __NR_utimensat 348 +#define __NR_signalfd 349 +#define __NR_timerfd_create 350 +#define __NR_eventfd 351 +#define __NR_fallocate 352 +#define __NR_timerfd_settime 353 +#define __NR_timerfd_gettime 354 +#define __NR_signalfd4 355 +#define __NR_eventfd2 356 +#define __NR_epoll_create1 357 +#define __NR_dup3 358 +#define __NR_pipe2 359 +#define __NR_inotify_init1 360 + +#ifdef __KERNEL__ + +#define NR_syscalls 361 + +#define __ARCH_WANT_IPC_PARSE_VERSION +#define __ARCH_WANT_OLD_READDIR +#define __ARCH_WANT_OLD_STAT +#define __ARCH_WANT_STAT64 +#define __ARCH_WANT_SYS_ALARM +#define __ARCH_WANT_SYS_GETHOSTNAME +#define __ARCH_WANT_SYS_PAUSE +#define __ARCH_WANT_SYS_SGETMASK +#define __ARCH_WANT_SYS_SIGNAL +#define __ARCH_WANT_SYS_TIME +#define __ARCH_WANT_SYS_UTIME +#define __ARCH_WANT_SYS_WAITPID +#define __ARCH_WANT_SYS_SOCKETCALL +#define __ARCH_WANT_SYS_FADVISE64 +#define __ARCH_WANT_SYS_GETPGRP +#define __ARCH_WANT_SYS_LLSEEK +#define __ARCH_WANT_SYS_NICE +#define __ARCH_WANT_SYS_OLD_GETRLIMIT +#define __ARCH_WANT_SYS_OLDUMOUNT +#define __ARCH_WANT_SYS_SIGPENDING +#define __ARCH_WANT_SYS_SIGPROCMASK +#define __ARCH_WANT_SYS_RT_SIGACTION + +/* + * "Conditional" syscalls + * + * What we want is __attribute__((weak,alias("sys_ni_syscall"))), + * but it doesn't work on all toolchains, so we just do it by hand + */ +#ifndef cond_syscall +#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall") +#endif + +#endif /* __KERNEL__ */ +#endif /* __ASM_SH_UNISTD_64_H */ diff --git a/arch/sh/include/asm/user.h b/arch/sh/include/asm/user.h new file mode 100644 index 000000000000..8fd3cf6c58d4 --- /dev/null +++ b/arch/sh/include/asm/user.h @@ -0,0 +1,67 @@ +#ifndef __ASM_SH_USER_H +#define __ASM_SH_USER_H + +#include <asm/ptrace.h> +#include <asm/page.h> + +/* + * Core file format: The core file is written in such a way that gdb + * can understand it and provide useful information to the user (under + * linux we use the `trad-core' bfd). The file contents are as follows: + * + * upage: 1 page consisting of a user struct that tells gdb + * what is present in the file. Directly after this is a + * copy of the task_struct, which is currently not used by gdb, + * but it may come in handy at some point. All of the registers + * are stored as part of the upage. The upage should always be + * only one page long. + * data: The data segment follows next. We use current->end_text to + * current->brk to pick up all of the user variables, plus any memory + * that may have been sbrk'ed. No attempt is made to determine if a + * page is demand-zero or if a page is totally unused, we just cover + * the entire range. All of the addresses are rounded in such a way + * that an integral number of pages is written. + * stack: We need the stack information in order to get a meaningful + * backtrace. We need to write the data from usp to + * current->start_stack, so we round each of these in order to be able + * to write an integer number of pages. + */ + +#if defined(__SH5__) || defined(CONFIG_CPU_SH5) +struct user_fpu_struct { + unsigned long fp_regs[32]; + unsigned int fpscr; +}; +#else +struct user_fpu_struct { + unsigned long fp_regs[16]; + unsigned long xfp_regs[16]; + unsigned long fpscr; + unsigned long fpul; +}; +#endif + +struct user { + struct pt_regs regs; /* entire machine state */ + struct user_fpu_struct fpu; /* Math Co-processor registers */ + int u_fpvalid; /* True if math co-processor being used */ + size_t u_tsize; /* text size (pages) */ + size_t u_dsize; /* data size (pages) */ + size_t u_ssize; /* stack size (pages) */ + unsigned long start_code; /* text starting address */ + unsigned long start_data; /* data starting address */ + unsigned long start_stack; /* stack starting address */ + long int signal; /* signal causing core dump */ + unsigned long u_ar0; /* help gdb find registers */ + struct user_fpu_struct* u_fpstate; /* Math Co-processor pointer */ + unsigned long magic; /* identifies a core file */ + char u_comm[32]; /* user command name */ +}; + +#define NBPG PAGE_SIZE +#define UPAGES 1 +#define HOST_TEXT_START_ADDR (u.start_code) +#define HOST_DATA_START_ADDR (u.start_data) +#define HOST_STACK_END_ADDR (u.start_stack + u.u_ssize * NBPG) + +#endif /* __ASM_SH_USER_H */ diff --git a/arch/sh/include/asm/vga.h b/arch/sh/include/asm/vga.h new file mode 100644 index 000000000000..06a5de8ace1a --- /dev/null +++ b/arch/sh/include/asm/vga.h @@ -0,0 +1,6 @@ +#ifndef __ASM_SH_VGA_H +#define __ASM_SH_VGA_H + +/* Stupid drivers. */ + +#endif /* __ASM_SH_VGA_H */ diff --git a/arch/sh/include/asm/watchdog.h b/arch/sh/include/asm/watchdog.h new file mode 100644 index 000000000000..f024fed00a72 --- /dev/null +++ b/arch/sh/include/asm/watchdog.h @@ -0,0 +1,107 @@ +/* + * include/asm-sh/watchdog.h + * + * Copyright (C) 2002, 2003 Paul Mundt + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#ifndef __ASM_SH_WATCHDOG_H +#define __ASM_SH_WATCHDOG_H +#ifdef __KERNEL__ + +#include <linux/types.h> +#include <cpu/watchdog.h> +#include <asm/io.h> + +/* + * See cpu-sh2/watchdog.h for explanation of this stupidity.. + */ +#ifndef WTCNT_R +# define WTCNT_R WTCNT +#endif + +#ifndef WTCSR_R +# define WTCSR_R WTCSR +#endif + +#define WTCNT_HIGH 0x5a +#define WTCSR_HIGH 0xa5 + +#define WTCSR_CKS2 0x04 +#define WTCSR_CKS1 0x02 +#define WTCSR_CKS0 0x01 + +/* + * CKS0-2 supports a number of clock division ratios. At the time the watchdog + * is enabled, it defaults to a 41 usec overflow period .. we overload this to + * something a little more reasonable, and really can't deal with anything + * lower than WTCSR_CKS_1024, else we drop back into the usec range. + * + * Clock Division Ratio Overflow Period + * -------------------------------------------- + * 1/32 (initial value) 41 usecs + * 1/64 82 usecs + * 1/128 164 usecs + * 1/256 328 usecs + * 1/512 656 usecs + * 1/1024 1.31 msecs + * 1/2048 2.62 msecs + * 1/4096 5.25 msecs + */ +#define WTCSR_CKS_32 0x00 +#define WTCSR_CKS_64 0x01 +#define WTCSR_CKS_128 0x02 +#define WTCSR_CKS_256 0x03 +#define WTCSR_CKS_512 0x04 +#define WTCSR_CKS_1024 0x05 +#define WTCSR_CKS_2048 0x06 +#define WTCSR_CKS_4096 0x07 + +/** + * sh_wdt_read_cnt - Read from Counter + * Reads back the WTCNT value. + */ +static inline __u8 sh_wdt_read_cnt(void) +{ + return ctrl_inb(WTCNT_R); +} + +/** + * sh_wdt_write_cnt - Write to Counter + * @val: Value to write + * + * Writes the given value @val to the lower byte of the timer counter. + * The upper byte is set manually on each write. + */ +static inline void sh_wdt_write_cnt(__u8 val) +{ + ctrl_outw((WTCNT_HIGH << 8) | (__u16)val, WTCNT); +} + +/** + * sh_wdt_read_csr - Read from Control/Status Register + * + * Reads back the WTCSR value. + */ +static inline __u8 sh_wdt_read_csr(void) +{ + return ctrl_inb(WTCSR_R); +} + +/** + * sh_wdt_write_csr - Write to Control/Status Register + * @val: Value to write + * + * Writes the given value @val to the lower byte of the control/status + * register. The upper byte is set manually on each write. + */ +static inline void sh_wdt_write_csr(__u8 val) +{ + ctrl_outw((WTCSR_HIGH << 8) | (__u16)val, WTCSR); +} + +#endif /* __KERNEL__ */ +#endif /* __ASM_SH_WATCHDOG_H */ diff --git a/arch/sh/include/asm/xor.h b/arch/sh/include/asm/xor.h new file mode 100644 index 000000000000..c82eb12a5b18 --- /dev/null +++ b/arch/sh/include/asm/xor.h @@ -0,0 +1 @@ +#include <asm-generic/xor.h> diff --git a/arch/sh/include/cpu-common/cpu/addrspace.h b/arch/sh/include/cpu-common/cpu/addrspace.h new file mode 100644 index 000000000000..2b9ab93efa4e --- /dev/null +++ b/arch/sh/include/cpu-common/cpu/addrspace.h @@ -0,0 +1,19 @@ +/* + * Definitions for the address spaces of the SH-2 CPUs. + * + * Copyright (C) 2003 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_CPU_SH2_ADDRSPACE_H +#define __ASM_CPU_SH2_ADDRSPACE_H + +#define P0SEG 0x00000000 +#define P1SEG 0x80000000 +#define P2SEG 0xa0000000 +#define P3SEG 0xc0000000 +#define P4SEG 0xe0000000 + +#endif /* __ASM_CPU_SH2_ADDRSPACE_H */ diff --git a/arch/sh/include/cpu-common/cpu/cacheflush.h b/arch/sh/include/cpu-common/cpu/cacheflush.h new file mode 100644 index 000000000000..c3db00b73605 --- /dev/null +++ b/arch/sh/include/cpu-common/cpu/cacheflush.h @@ -0,0 +1,44 @@ +/* + * include/asm-sh/cpu-sh2/cacheflush.h + * + * Copyright (C) 2003 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_CPU_SH2_CACHEFLUSH_H +#define __ASM_CPU_SH2_CACHEFLUSH_H + +/* + * Cache flushing: + * + * - flush_cache_all() flushes entire cache + * - flush_cache_mm(mm) flushes the specified mm context's cache lines + * - flush_cache_dup mm(mm) handles cache flushing when forking + * - flush_cache_page(mm, vmaddr, pfn) flushes a single page + * - flush_cache_range(vma, start, end) flushes a range of pages + * + * - flush_dcache_page(pg) flushes(wback&invalidates) a page for dcache + * - flush_icache_range(start, end) flushes(invalidates) a range for icache + * - flush_icache_page(vma, pg) flushes(invalidates) a page for icache + * + * Caches are indexed (effectively) by physical address on SH-2, so + * we don't need them. + */ +#define flush_cache_all() do { } while (0) +#define flush_cache_mm(mm) do { } while (0) +#define flush_cache_dup_mm(mm) do { } while (0) +#define flush_cache_range(vma, start, end) do { } while (0) +#define flush_cache_page(vma, vmaddr, pfn) do { } while (0) +#define flush_dcache_page(page) do { } while (0) +#define flush_dcache_mmap_lock(mapping) do { } while (0) +#define flush_dcache_mmap_unlock(mapping) do { } while (0) +#define flush_icache_range(start, end) do { } while (0) +#define flush_icache_page(vma,pg) do { } while (0) +#define flush_icache_user_range(vma,pg,adr,len) do { } while (0) +#define flush_cache_sigtramp(vaddr) do { } while (0) + +#define p3_cache_init() do { } while (0) + +#endif /* __ASM_CPU_SH2_CACHEFLUSH_H */ diff --git a/arch/sh/include/cpu-common/cpu/mmu_context.h b/arch/sh/include/cpu-common/cpu/mmu_context.h new file mode 100644 index 000000000000..beeb299e01ec --- /dev/null +++ b/arch/sh/include/cpu-common/cpu/mmu_context.h @@ -0,0 +1,16 @@ +/* + * include/asm-sh/cpu-sh2/mmu_context.h + * + * Copyright (C) 2003 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_CPU_SH2_MMU_CONTEXT_H +#define __ASM_CPU_SH2_MMU_CONTEXT_H + +/* No MMU */ + +#endif /* __ASM_CPU_SH2_MMU_CONTEXT_H */ + diff --git a/arch/sh/include/cpu-common/cpu/rtc.h b/arch/sh/include/cpu-common/cpu/rtc.h new file mode 100644 index 000000000000..39e2d6e94782 --- /dev/null +++ b/arch/sh/include/cpu-common/cpu/rtc.h @@ -0,0 +1,8 @@ +#ifndef __ASM_SH_CPU_SH2_RTC_H +#define __ASM_SH_CPU_SH2_RTC_H + +#define rtc_reg_size sizeof(u16) +#define RTC_BIT_INVERTED 0 +#define RTC_DEF_CAPABILITIES 0UL + +#endif /* __ASM_SH_CPU_SH2_RTC_H */ diff --git a/arch/sh/include/cpu-common/cpu/sigcontext.h b/arch/sh/include/cpu-common/cpu/sigcontext.h new file mode 100644 index 000000000000..fe5c15dd6e87 --- /dev/null +++ b/arch/sh/include/cpu-common/cpu/sigcontext.h @@ -0,0 +1,17 @@ +#ifndef __ASM_CPU_SH2_SIGCONTEXT_H +#define __ASM_CPU_SH2_SIGCONTEXT_H + +struct sigcontext { + unsigned long oldmask; + + /* CPU registers */ + unsigned long sc_regs[16]; + unsigned long sc_pc; + unsigned long sc_pr; + unsigned long sc_sr; + unsigned long sc_gbr; + unsigned long sc_mach; + unsigned long sc_macl; +}; + +#endif /* __ASM_CPU_SH2_SIGCONTEXT_H */ diff --git a/arch/sh/include/cpu-common/cpu/timer.h b/arch/sh/include/cpu-common/cpu/timer.h new file mode 100644 index 000000000000..a39c241e8195 --- /dev/null +++ b/arch/sh/include/cpu-common/cpu/timer.h @@ -0,0 +1,6 @@ +#ifndef __ASM_CPU_SH2_TIMER_H +#define __ASM_CPU_SH2_TIMER_H + +/* Nothing needed yet */ + +#endif /* __ASM_CPU_SH2_TIMER_H */ diff --git a/arch/sh/include/cpu-sh2/cpu/cache.h b/arch/sh/include/cpu-sh2/cpu/cache.h new file mode 100644 index 000000000000..673515bc4135 --- /dev/null +++ b/arch/sh/include/cpu-sh2/cpu/cache.h @@ -0,0 +1,43 @@ +/* + * include/asm-sh/cpu-sh2/cache.h + * + * Copyright (C) 2003 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_CPU_SH2_CACHE_H +#define __ASM_CPU_SH2_CACHE_H + +#define L1_CACHE_SHIFT 4 + +#define SH_CACHE_VALID 1 +#define SH_CACHE_UPDATED 2 +#define SH_CACHE_COMBINED 4 +#define SH_CACHE_ASSOC 8 + +#if defined(CONFIG_CPU_SUBTYPE_SH7619) +#define CCR 0xffffffec + +#define CCR_CACHE_CE 0x01 /* Cache enable */ +#define CCR_CACHE_WT 0x02 /* CCR[bit1=1,bit2=1] */ + /* 0x00000000-0x7fffffff: Write-through */ + /* 0x80000000-0x9fffffff: Write-back */ + /* 0xc0000000-0xdfffffff: Write-through */ +#define CCR_CACHE_CB 0x04 /* CCR[bit1=0,bit2=0] */ + /* 0x00000000-0x7fffffff: Write-back */ + /* 0x80000000-0x9fffffff: Write-through */ + /* 0xc0000000-0xdfffffff: Write-back */ +#define CCR_CACHE_CF 0x08 /* Cache invalidate */ + +#define CACHE_OC_ADDRESS_ARRAY 0xf0000000 +#define CACHE_OC_DATA_ARRAY 0xf1000000 + +#define CCR_CACHE_ENABLE CCR_CACHE_CE +#define CCR_CACHE_INVALIDATE CCR_CACHE_CF +#define CACHE_PHYSADDR_MASK 0x1ffffc00 + +#endif + +#endif /* __ASM_CPU_SH2_CACHE_H */ diff --git a/arch/sh/include/cpu-sh2/cpu/dma.h b/arch/sh/include/cpu-sh2/cpu/dma.h new file mode 100644 index 000000000000..d66b43cdc637 --- /dev/null +++ b/arch/sh/include/cpu-sh2/cpu/dma.h @@ -0,0 +1,23 @@ +/* + * Definitions for the SH-2 DMAC. + * + * Copyright (C) 2003 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_CPU_SH2_DMA_H +#define __ASM_CPU_SH2_DMA_H + +#define SH_MAX_DMA_CHANNELS 2 + +#define SAR ((unsigned long[]){ 0xffffff80, 0xffffff90 }) +#define DAR ((unsigned long[]){ 0xffffff84, 0xffffff94 }) +#define DMATCR ((unsigned long[]){ 0xffffff88, 0xffffff98 }) +#define CHCR ((unsigned long[]){ 0xfffffffc, 0xffffff9c }) + +#define DMAOR 0xffffffb0 + +#endif /* __ASM_CPU_SH2_DMA_H */ + diff --git a/arch/sh/include/cpu-sh2/cpu/freq.h b/arch/sh/include/cpu-sh2/cpu/freq.h new file mode 100644 index 000000000000..31de475da70b --- /dev/null +++ b/arch/sh/include/cpu-sh2/cpu/freq.h @@ -0,0 +1,18 @@ +/* + * include/asm-sh/cpu-sh2/freq.h + * + * Copyright (C) 2006 Yoshinori Sato + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_CPU_SH2_FREQ_H +#define __ASM_CPU_SH2_FREQ_H + +#if defined(CONFIG_CPU_SUBTYPE_SH7619) +#define FREQCR 0xf815ff80 +#endif + +#endif /* __ASM_CPU_SH2_FREQ_H */ + diff --git a/arch/sh/include/cpu-sh2/cpu/ubc.h b/arch/sh/include/cpu-sh2/cpu/ubc.h new file mode 100644 index 000000000000..ba0e87f19c7a --- /dev/null +++ b/arch/sh/include/cpu-sh2/cpu/ubc.h @@ -0,0 +1,32 @@ +/* + * include/asm-sh/cpu-sh2/ubc.h + * + * Copyright (C) 2003 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_CPU_SH2_UBC_H +#define __ASM_CPU_SH2_UBC_H + +#define UBC_BARA 0xffffff40 +#define UBC_BAMRA 0xffffff44 +#define UBC_BBRA 0xffffff48 +#define UBC_BARB 0xffffff60 +#define UBC_BAMRB 0xffffff64 +#define UBC_BBRB 0xffffff68 +#define UBC_BDRB 0xffffff70 +#define UBC_BDMRB 0xffffff74 +#define UBC_BRCR 0xffffff78 + +/* + * We don't have any ASID changes to make in the UBC on the SH-2. + * + * Make these purposely invalid to track misuse. + */ +#define UBC_BASRA 0x00000000 +#define UBC_BASRB 0x00000000 + +#endif /* __ASM_CPU_SH2_UBC_H */ + diff --git a/arch/sh/include/cpu-sh2/cpu/watchdog.h b/arch/sh/include/cpu-sh2/cpu/watchdog.h new file mode 100644 index 000000000000..393161c9c6d0 --- /dev/null +++ b/arch/sh/include/cpu-sh2/cpu/watchdog.h @@ -0,0 +1,69 @@ +/* + * include/asm-sh/cpu-sh2/watchdog.h + * + * Copyright (C) 2002, 2003 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_CPU_SH2_WATCHDOG_H +#define __ASM_CPU_SH2_WATCHDOG_H + +/* + * More SH-2 brilliance .. its not good enough that we can't read + * and write the same sizes to WTCNT, now we have to read and write + * with different sizes at different addresses for WTCNT _and_ RSTCSR. + * + * At least on the bright side no one has managed to screw over WTCSR + * in this fashion .. yet. + */ +/* Register definitions */ +#define WTCNT 0xfffffe80 +#define WTCSR 0xfffffe80 +#define RSTCSR 0xfffffe82 + +#define WTCNT_R (WTCNT + 1) +#define RSTCSR_R (RSTCSR + 1) + +/* Bit definitions */ +#define WTCSR_IOVF 0x80 +#define WTCSR_WT 0x40 +#define WTCSR_TME 0x20 +#define WTCSR_RSTS 0x00 + +#define RSTCSR_RSTS 0x20 + +/** + * sh_wdt_read_rstcsr - Read from Reset Control/Status Register + * + * Reads back the RSTCSR value. + */ +static inline __u8 sh_wdt_read_rstcsr(void) +{ + /* + * Same read/write brain-damage as for WTCNT here.. + */ + return ctrl_inb(RSTCSR_R); +} + +/** + * sh_wdt_write_csr - Write to Reset Control/Status Register + * + * @val: Value to write + * + * Writes the given value @val to the lower byte of the control/status + * register. The upper byte is set manually on each write. + */ +static inline void sh_wdt_write_rstcsr(__u8 val) +{ + /* + * Note: Due to the brain-damaged nature of this register, + * we can't presently touch the WOVF bit, since the upper byte + * has to be swapped for this. So just leave it alone.. + */ + ctrl_outw((WTCNT_HIGH << 8) | (__u16)val, RSTCSR); +} + +#endif /* __ASM_CPU_SH2_WATCHDOG_H */ + diff --git a/arch/sh/include/cpu-sh2a/cpu/addrspace.h b/arch/sh/include/cpu-sh2a/cpu/addrspace.h new file mode 100644 index 000000000000..31eb4b58aa6d --- /dev/null +++ b/arch/sh/include/cpu-sh2a/cpu/addrspace.h @@ -0,0 +1,10 @@ +#ifndef __ASM_SH_CPU_SH2A_ADDRSPACE_H +#define __ASM_SH_CPU_SH2A_ADDRSPACE_H + +#define P0SEG 0x00000000 +#define P1SEG 0x00000000 +#define P2SEG 0x20000000 +#define P3SEG 0x40000000 +#define P4SEG 0x60000000 + +#endif /* __ASM_SH_CPU_SH2A_ADDRSPACE_H */ diff --git a/arch/sh/include/cpu-sh2a/cpu/cache.h b/arch/sh/include/cpu-sh2a/cpu/cache.h new file mode 100644 index 000000000000..defb0baa5a06 --- /dev/null +++ b/arch/sh/include/cpu-sh2a/cpu/cache.h @@ -0,0 +1,43 @@ +/* + * include/asm-sh/cpu-sh2a/cache.h + * + * Copyright (C) 2004 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_CPU_SH2A_CACHE_H +#define __ASM_CPU_SH2A_CACHE_H + +#define L1_CACHE_SHIFT 4 + +#define SH_CACHE_VALID 1 +#define SH_CACHE_UPDATED 2 +#define SH_CACHE_COMBINED 4 +#define SH_CACHE_ASSOC 8 + +#define CCR 0xfffc1000 /* CCR1 */ +#define CCR2 0xfffc1004 + +/* + * Most of the SH-2A CCR1 definitions resemble the SH-4 ones. All others not + * listed here are reserved. + */ +#define CCR_CACHE_CB 0x0000 /* Hack */ +#define CCR_CACHE_OCE 0x0001 +#define CCR_CACHE_WT 0x0002 +#define CCR_CACHE_OCI 0x0008 /* OCF */ +#define CCR_CACHE_ICE 0x0100 +#define CCR_CACHE_ICI 0x0800 /* ICF */ + +#define CACHE_IC_ADDRESS_ARRAY 0xf0000000 +#define CACHE_OC_ADDRESS_ARRAY 0xf0800000 + +#define CCR_CACHE_ENABLE (CCR_CACHE_OCE | CCR_CACHE_ICE) +#define CCR_CACHE_INVALIDATE (CCR_CACHE_OCI | CCR_CACHE_ICI) +#define CCR_ICACHE_INVALIDATE CCR_CACHE_ICI +#define CCR_OCACHE_INVALIDATE CCR_CACHE_OCI +#define CACHE_PHYSADDR_MASK 0x1ffffc00 + +#endif /* __ASM_CPU_SH2A_CACHE_H */ diff --git a/arch/sh/include/cpu-sh2a/cpu/cacheflush.h b/arch/sh/include/cpu-sh2a/cpu/cacheflush.h new file mode 100644 index 000000000000..3d3b9205d2ac --- /dev/null +++ b/arch/sh/include/cpu-sh2a/cpu/cacheflush.h @@ -0,0 +1,34 @@ +#ifndef __ASM_CPU_SH2A_CACHEFLUSH_H +#define __ASM_CPU_SH2A_CACHEFLUSH_H + +/* + * Cache flushing: + * + * - flush_cache_all() flushes entire cache + * - flush_cache_mm(mm) flushes the specified mm context's cache lines + * - flush_cache_dup mm(mm) handles cache flushing when forking + * - flush_cache_page(mm, vmaddr, pfn) flushes a single page + * - flush_cache_range(vma, start, end) flushes a range of pages + * + * - flush_dcache_page(pg) flushes(wback&invalidates) a page for dcache + * - flush_icache_range(start, end) flushes(invalidates) a range for icache + * - flush_icache_page(vma, pg) flushes(invalidates) a page for icache + * + * Caches are indexed (effectively) by physical address on SH-2, so + * we don't need them. + */ +#define flush_cache_all() do { } while (0) +#define flush_cache_mm(mm) do { } while (0) +#define flush_cache_dup_mm(mm) do { } while (0) +#define flush_cache_range(vma, start, end) do { } while (0) +#define flush_cache_page(vma, vmaddr, pfn) do { } while (0) +#define flush_dcache_page(page) do { } while (0) +#define flush_dcache_mmap_lock(mapping) do { } while (0) +#define flush_dcache_mmap_unlock(mapping) do { } while (0) +void flush_icache_range(unsigned long start, unsigned long end); +#define flush_icache_page(vma,pg) do { } while (0) +#define flush_icache_user_range(vma,pg,adr,len) do { } while (0) +#define flush_cache_sigtramp(vaddr) do { } while (0) + +#define p3_cache_init() do { } while (0) +#endif /* __ASM_CPU_SH2A_CACHEFLUSH_H */ diff --git a/arch/sh/include/cpu-sh2a/cpu/dma.h b/arch/sh/include/cpu-sh2a/cpu/dma.h new file mode 100644 index 000000000000..27a13ef4fdfc --- /dev/null +++ b/arch/sh/include/cpu-sh2a/cpu/dma.h @@ -0,0 +1 @@ +#include <cpu-sh2/cpu/dma.h> diff --git a/arch/sh/include/cpu-sh2a/cpu/freq.h b/arch/sh/include/cpu-sh2a/cpu/freq.h new file mode 100644 index 000000000000..830fd43b6cdc --- /dev/null +++ b/arch/sh/include/cpu-sh2a/cpu/freq.h @@ -0,0 +1,16 @@ +/* + * include/asm-sh/cpu-sh2a/freq.h + * + * Copyright (C) 2006 Yoshinori Sato + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_CPU_SH2A_FREQ_H +#define __ASM_CPU_SH2A_FREQ_H + +#define FREQCR 0xfffe0010 + +#endif /* __ASM_CPU_SH2A_FREQ_H */ + diff --git a/arch/sh/include/cpu-sh2a/cpu/rtc.h b/arch/sh/include/cpu-sh2a/cpu/rtc.h new file mode 100644 index 000000000000..afb511e2bed7 --- /dev/null +++ b/arch/sh/include/cpu-sh2a/cpu/rtc.h @@ -0,0 +1,8 @@ +#ifndef __ASM_SH_CPU_SH2A_RTC_H +#define __ASM_SH_CPU_SH2A_RTC_H + +#define rtc_reg_size sizeof(u16) +#define RTC_BIT_INVERTED 0 +#define RTC_DEF_CAPABILITIES RTC_CAP_4_DIGIT_YEAR + +#endif /* __ASM_SH_CPU_SH2A_RTC_H */ diff --git a/arch/sh/include/cpu-sh2a/cpu/ubc.h b/arch/sh/include/cpu-sh2a/cpu/ubc.h new file mode 100644 index 000000000000..8ce2fc1cf625 --- /dev/null +++ b/arch/sh/include/cpu-sh2a/cpu/ubc.h @@ -0,0 +1 @@ +#include <cpu-sh2/cpu/ubc.h> diff --git a/arch/sh/include/cpu-sh2a/cpu/watchdog.h b/arch/sh/include/cpu-sh2a/cpu/watchdog.h new file mode 100644 index 000000000000..e7e8259e468c --- /dev/null +++ b/arch/sh/include/cpu-sh2a/cpu/watchdog.h @@ -0,0 +1 @@ +#include <cpu-sh2/cpu/watchdog.h> diff --git a/arch/sh/include/cpu-sh3/cpu/adc.h b/arch/sh/include/cpu-sh3/cpu/adc.h new file mode 100644 index 000000000000..b289e3ca19a6 --- /dev/null +++ b/arch/sh/include/cpu-sh3/cpu/adc.h @@ -0,0 +1,28 @@ +#ifndef __ASM_CPU_SH3_ADC_H +#define __ASM_CPU_SH3_ADC_H + +/* + * Copyright (C) 2004 Andriy Skulysh + */ + + +#define ADDRAH 0xa4000080 +#define ADDRAL 0xa4000082 +#define ADDRBH 0xa4000084 +#define ADDRBL 0xa4000086 +#define ADDRCH 0xa4000088 +#define ADDRCL 0xa400008a +#define ADDRDH 0xa400008c +#define ADDRDL 0xa400008e +#define ADCSR 0xa4000090 + +#define ADCSR_ADF 0x80 +#define ADCSR_ADIE 0x40 +#define ADCSR_ADST 0x20 +#define ADCSR_MULTI 0x10 +#define ADCSR_CKS 0x08 +#define ADCSR_CH_MASK 0x07 + +#define ADCR 0xa4000092 + +#endif /* __ASM_CPU_SH3_ADC_H */ diff --git a/arch/sh/include/cpu-sh3/cpu/cache.h b/arch/sh/include/cpu-sh3/cpu/cache.h new file mode 100644 index 000000000000..bee2d81c56bf --- /dev/null +++ b/arch/sh/include/cpu-sh3/cpu/cache.h @@ -0,0 +1,43 @@ +/* + * include/asm-sh/cpu-sh3/cache.h + * + * Copyright (C) 1999 Niibe Yutaka + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_CPU_SH3_CACHE_H +#define __ASM_CPU_SH3_CACHE_H + +#define L1_CACHE_SHIFT 4 + +#define SH_CACHE_VALID 1 +#define SH_CACHE_UPDATED 2 +#define SH_CACHE_COMBINED 4 +#define SH_CACHE_ASSOC 8 + +#define CCR 0xffffffec /* Address of Cache Control Register */ + +#define CCR_CACHE_CE 0x01 /* Cache Enable */ +#define CCR_CACHE_WT 0x02 /* Write-Through (for P0,U0,P3) (else writeback) */ +#define CCR_CACHE_CB 0x04 /* Write-Back (for P1) (else writethrough) */ +#define CCR_CACHE_CF 0x08 /* Cache Flush */ +#define CCR_CACHE_ORA 0x20 /* RAM mode */ + +#define CACHE_OC_ADDRESS_ARRAY 0xf0000000 +#define CACHE_PHYSADDR_MASK 0x1ffffc00 + +#define CCR_CACHE_ENABLE CCR_CACHE_CE +#define CCR_CACHE_INVALIDATE CCR_CACHE_CF + +#if defined(CONFIG_CPU_SUBTYPE_SH7705) || \ + defined(CONFIG_CPU_SUBTYPE_SH7710) || \ + defined(CONFIG_CPU_SUBTYPE_SH7720) || \ + defined(CONFIG_CPU_SUBTYPE_SH7721) +#define CCR3_REG 0xa40000b4 +#define CCR_CACHE_16KB 0x00010000 +#define CCR_CACHE_32KB 0x00020000 +#endif + +#endif /* __ASM_CPU_SH3_CACHE_H */ diff --git a/arch/sh/include/cpu-sh3/cpu/cacheflush.h b/arch/sh/include/cpu-sh3/cpu/cacheflush.h new file mode 100644 index 000000000000..abc909880807 --- /dev/null +++ b/arch/sh/include/cpu-sh3/cpu/cacheflush.h @@ -0,0 +1,36 @@ +/* + * include/asm-sh/cpu-sh3/cacheflush.h + * + * Copyright (C) 1999 Niibe Yutaka + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_CPU_SH3_CACHEFLUSH_H +#define __ASM_CPU_SH3_CACHEFLUSH_H + +#if defined(CONFIG_SH7705_CACHE_32KB) +/* SH7705 is an SH3 processor with 32KB cache. This has alias issues like the + * SH4. Unlike the SH4 this is a unified cache so we need to do some work + * in mmap when 'exec'ing a new binary + */ + /* 32KB cache, 4kb PAGE sizes need to check bit 12 */ +#define CACHE_ALIAS 0x00001000 + +#define PG_mapped PG_arch_1 + +void flush_cache_all(void); +void flush_cache_mm(struct mm_struct *mm); +#define flush_cache_dup_mm(mm) flush_cache_mm(mm) +void flush_cache_range(struct vm_area_struct *vma, unsigned long start, + unsigned long end); +void flush_cache_page(struct vm_area_struct *vma, unsigned long addr, unsigned long pfn); +void flush_dcache_page(struct page *pg); +void flush_icache_range(unsigned long start, unsigned long end); +void flush_icache_page(struct vm_area_struct *vma, struct page *page); +#else +#include <cpu-common/cpu/cacheflush.h> +#endif + +#endif /* __ASM_CPU_SH3_CACHEFLUSH_H */ diff --git a/arch/sh/include/cpu-sh3/cpu/dac.h b/arch/sh/include/cpu-sh3/cpu/dac.h new file mode 100644 index 000000000000..05fda8316ebc --- /dev/null +++ b/arch/sh/include/cpu-sh3/cpu/dac.h @@ -0,0 +1,41 @@ +#ifndef __ASM_CPU_SH3_DAC_H +#define __ASM_CPU_SH3_DAC_H + +/* + * Copyright (C) 2003 Andriy Skulysh + */ + + +#define DADR0 0xa40000a0 +#define DADR1 0xa40000a2 +#define DACR 0xa40000a4 +#define DACR_DAOE1 0x80 +#define DACR_DAOE0 0x40 +#define DACR_DAE 0x20 + + +static __inline__ void sh_dac_enable(int channel) +{ + unsigned char v; + v = ctrl_inb(DACR); + if(channel) v |= DACR_DAOE1; + else v |= DACR_DAOE0; + ctrl_outb(v,DACR); +} + +static __inline__ void sh_dac_disable(int channel) +{ + unsigned char v; + v = ctrl_inb(DACR); + if(channel) v &= ~DACR_DAOE1; + else v &= ~DACR_DAOE0; + ctrl_outb(v,DACR); +} + +static __inline__ void sh_dac_output(u8 value, int channel) +{ + if(channel) ctrl_outb(value,DADR1); + else ctrl_outb(value,DADR0); +} + +#endif /* __ASM_CPU_SH3_DAC_H */ diff --git a/arch/sh/include/cpu-sh3/cpu/dma.h b/arch/sh/include/cpu-sh3/cpu/dma.h new file mode 100644 index 000000000000..6813c3220a1d --- /dev/null +++ b/arch/sh/include/cpu-sh3/cpu/dma.h @@ -0,0 +1,51 @@ +#ifndef __ASM_CPU_SH3_DMA_H +#define __ASM_CPU_SH3_DMA_H + + +#if defined(CONFIG_CPU_SUBTYPE_SH7720) || \ + defined(CONFIG_CPU_SUBTYPE_SH7721) +#define SH_DMAC_BASE 0xa4010020 +#else +#define SH_DMAC_BASE 0xa4000020 +#endif + +#if defined(CONFIG_CPU_SUBTYPE_SH7720) || defined(CONFIG_CPU_SUBTYPE_SH7709) +#define DMTE0_IRQ 48 +#define DMTE1_IRQ 49 +#define DMTE2_IRQ 50 +#define DMTE3_IRQ 51 +#define DMTE4_IRQ 76 +#define DMTE5_IRQ 77 +#endif + +/* Definitions for the SuperH DMAC */ +#define TM_BURST 0x00000020 +#define TS_8 0x00000000 +#define TS_16 0x00000008 +#define TS_32 0x00000010 +#define TS_128 0x00000018 + +#define CHCR_TS_MASK 0x18 +#define CHCR_TS_SHIFT 3 + +#define DMAOR_INIT DMAOR_DME + +/* + * The SuperH DMAC supports a number of transmit sizes, we list them here, + * with their respective values as they appear in the CHCR registers. + */ +enum { + XMIT_SZ_8BIT, + XMIT_SZ_16BIT, + XMIT_SZ_32BIT, + XMIT_SZ_128BIT, +}; + +static unsigned int ts_shift[] __maybe_unused = { + [XMIT_SZ_8BIT] = 0, + [XMIT_SZ_16BIT] = 1, + [XMIT_SZ_32BIT] = 2, + [XMIT_SZ_128BIT] = 4, +}; + +#endif /* __ASM_CPU_SH3_DMA_H */ diff --git a/arch/sh/include/cpu-sh3/cpu/freq.h b/arch/sh/include/cpu-sh3/cpu/freq.h new file mode 100644 index 000000000000..53c62302b2e3 --- /dev/null +++ b/arch/sh/include/cpu-sh3/cpu/freq.h @@ -0,0 +1,27 @@ +/* + * include/asm-sh/cpu-sh3/freq.h + * + * Copyright (C) 2002, 2003 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_CPU_SH3_FREQ_H +#define __ASM_CPU_SH3_FREQ_H + +#ifdef CONFIG_CPU_SUBTYPE_SH7712 +#define FRQCR 0xA415FF80 +#else +#define FRQCR 0xffffff80 +#endif + +#define MIN_DIVISOR_NR 0 +#define MAX_DIVISOR_NR 4 + +#define FRQCR_CKOEN 0x0100 +#define FRQCR_PLLEN 0x0080 +#define FRQCR_PSTBY 0x0040 + +#endif /* __ASM_CPU_SH3_FREQ_H */ + diff --git a/arch/sh/include/cpu-sh3/cpu/gpio.h b/arch/sh/include/cpu-sh3/cpu/gpio.h new file mode 100644 index 000000000000..4e53eb314b8f --- /dev/null +++ b/arch/sh/include/cpu-sh3/cpu/gpio.h @@ -0,0 +1,67 @@ +/* + * include/asm-sh/cpu-sh3/gpio.h + * + * Copyright (C) 2007 Markus Brunner, Mark Jonas + * + * Addresses for the Pin Function Controller + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef _CPU_SH3_GPIO_H +#define _CPU_SH3_GPIO_H + +#if defined(CONFIG_CPU_SUBTYPE_SH7720) || \ + defined(CONFIG_CPU_SUBTYPE_SH7721) + +/* Control registers */ +#define PORT_PACR 0xA4050100UL +#define PORT_PBCR 0xA4050102UL +#define PORT_PCCR 0xA4050104UL +#define PORT_PDCR 0xA4050106UL +#define PORT_PECR 0xA4050108UL +#define PORT_PFCR 0xA405010AUL +#define PORT_PGCR 0xA405010CUL +#define PORT_PHCR 0xA405010EUL +#define PORT_PJCR 0xA4050110UL +#define PORT_PKCR 0xA4050112UL +#define PORT_PLCR 0xA4050114UL +#define PORT_PMCR 0xA4050116UL +#define PORT_PPCR 0xA4050118UL +#define PORT_PRCR 0xA405011AUL +#define PORT_PSCR 0xA405011CUL +#define PORT_PTCR 0xA405011EUL +#define PORT_PUCR 0xA4050120UL +#define PORT_PVCR 0xA4050122UL + +/* Data registers */ +#define PORT_PADR 0xA4050140UL +/* Address of PORT_PBDR is wrong in the datasheet, see errata 2005-09-21 */ +#define PORT_PBDR 0xA4050142UL +#define PORT_PCDR 0xA4050144UL +#define PORT_PDDR 0xA4050146UL +#define PORT_PEDR 0xA4050148UL +#define PORT_PFDR 0xA405014AUL +#define PORT_PGDR 0xA405014CUL +#define PORT_PHDR 0xA405014EUL +#define PORT_PJDR 0xA4050150UL +#define PORT_PKDR 0xA4050152UL +#define PORT_PLDR 0xA4050154UL +#define PORT_PMDR 0xA4050156UL +#define PORT_PPDR 0xA4050158UL +#define PORT_PRDR 0xA405015AUL +#define PORT_PSDR 0xA405015CUL +#define PORT_PTDR 0xA405015EUL +#define PORT_PUDR 0xA4050160UL +#define PORT_PVDR 0xA4050162UL + +/* Pin Select Registers */ +#define PORT_PSELA 0xA4050124UL +#define PORT_PSELB 0xA4050126UL +#define PORT_PSELC 0xA4050128UL +#define PORT_PSELD 0xA405012AUL + +#endif + +#endif diff --git a/arch/sh/include/cpu-sh3/cpu/mmu_context.h b/arch/sh/include/cpu-sh3/cpu/mmu_context.h new file mode 100644 index 000000000000..ab09da73ce77 --- /dev/null +++ b/arch/sh/include/cpu-sh3/cpu/mmu_context.h @@ -0,0 +1,44 @@ +/* + * include/asm-sh/cpu-sh3/mmu_context.h + * + * Copyright (C) 1999 Niibe Yutaka + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_CPU_SH3_MMU_CONTEXT_H +#define __ASM_CPU_SH3_MMU_CONTEXT_H + +#define MMU_PTEH 0xFFFFFFF0 /* Page table entry register HIGH */ +#define MMU_PTEL 0xFFFFFFF4 /* Page table entry register LOW */ +#define MMU_TTB 0xFFFFFFF8 /* Translation table base register */ +#define MMU_TEA 0xFFFFFFFC /* TLB Exception Address */ + +#define MMUCR 0xFFFFFFE0 /* MMU Control Register */ + +#define MMU_TLB_ADDRESS_ARRAY 0xF2000000 +#define MMU_PAGE_ASSOC_BIT 0x80 + +#define MMU_NTLB_ENTRIES 128 /* for 7708 */ +#define MMU_NTLB_WAYS 4 +#define MMU_CONTROL_INIT 0x007 /* SV=0, TF=1, IX=1, AT=1 */ + +#define TRA 0xffffffd0 +#define EXPEVT 0xffffffd4 + +#if defined(CONFIG_CPU_SUBTYPE_SH7705) || \ + defined(CONFIG_CPU_SUBTYPE_SH7706) || \ + defined(CONFIG_CPU_SUBTYPE_SH7707) || \ + defined(CONFIG_CPU_SUBTYPE_SH7709) || \ + defined(CONFIG_CPU_SUBTYPE_SH7710) || \ + defined(CONFIG_CPU_SUBTYPE_SH7712) || \ + defined(CONFIG_CPU_SUBTYPE_SH7720) || \ + defined(CONFIG_CPU_SUBTYPE_SH7721) +#define INTEVT 0xa4000000 /* INTEVTE2(0xa4000000) */ +#else +#define INTEVT 0xffffffd8 +#endif + +#endif /* __ASM_CPU_SH3_MMU_CONTEXT_H */ + diff --git a/arch/sh/include/cpu-sh3/cpu/timer.h b/arch/sh/include/cpu-sh3/cpu/timer.h new file mode 100644 index 000000000000..793acf12aa08 --- /dev/null +++ b/arch/sh/include/cpu-sh3/cpu/timer.h @@ -0,0 +1,67 @@ +/* + * include/asm-sh/cpu-sh3/timer.h + * + * Copyright (C) 2004 Lineo Solutions, Inc. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_CPU_SH3_TIMER_H +#define __ASM_CPU_SH3_TIMER_H + +/* + * --------------------------------------------------------------------------- + * TMU Common definitions for SH3 processors + * SH7706 + * SH7709S + * SH7727 + * SH7729R + * SH7710 + * SH7720 + * SH7710 + * --------------------------------------------------------------------------- + */ + +#if !defined(CONFIG_CPU_SUBTYPE_SH7720) && !defined(CONFIG_CPU_SUBTYPE_SH7721) +#define TMU_TOCR 0xfffffe90 /* Byte access */ +#endif + +#if defined(CONFIG_CPU_SUBTYPE_SH7710) || \ + defined(CONFIG_CPU_SUBTYPE_SH7720) || \ + defined(CONFIG_CPU_SUBTYPE_SH7721) +#define TMU_012_TSTR 0xa412fe92 /* Byte access */ + +#define TMU0_TCOR 0xa412fe94 /* Long access */ +#define TMU0_TCNT 0xa412fe98 /* Long access */ +#define TMU0_TCR 0xa412fe9c /* Word access */ + +#define TMU1_TCOR 0xa412fea0 /* Long access */ +#define TMU1_TCNT 0xa412fea4 /* Long access */ +#define TMU1_TCR 0xa412fea8 /* Word access */ + +#define TMU2_TCOR 0xa412feac /* Long access */ +#define TMU2_TCNT 0xa412feb0 /* Long access */ +#define TMU2_TCR 0xa412feb4 /* Word access */ + +#else +#define TMU_012_TSTR 0xfffffe92 /* Byte access */ + +#define TMU0_TCOR 0xfffffe94 /* Long access */ +#define TMU0_TCNT 0xfffffe98 /* Long access */ +#define TMU0_TCR 0xfffffe9c /* Word access */ + +#define TMU1_TCOR 0xfffffea0 /* Long access */ +#define TMU1_TCNT 0xfffffea4 /* Long access */ +#define TMU1_TCR 0xfffffea8 /* Word access */ + +#define TMU2_TCOR 0xfffffeac /* Long access */ +#define TMU2_TCNT 0xfffffeb0 /* Long access */ +#define TMU2_TCR 0xfffffeb4 /* Word access */ +#if !defined(CONFIG_CPU_SUBTYPE_SH7720) && !defined(CONFIG_CPU_SUBTYPE_SH7721) +#define TMU2_TCPR2 0xfffffeb8 /* Long access */ +#endif +#endif + +#endif /* __ASM_CPU_SH3_TIMER_H */ + diff --git a/arch/sh/include/cpu-sh3/cpu/ubc.h b/arch/sh/include/cpu-sh3/cpu/ubc.h new file mode 100644 index 000000000000..4e6381d5ff7a --- /dev/null +++ b/arch/sh/include/cpu-sh3/cpu/ubc.h @@ -0,0 +1,42 @@ +/* + * include/asm-sh/cpu-sh3/ubc.h + * + * Copyright (C) 1999 Niibe Yutaka + * Copyright (C) 2003 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_CPU_SH3_UBC_H +#define __ASM_CPU_SH3_UBC_H + +#if defined(CONFIG_CPU_SUBTYPE_SH7710) || \ + defined(CONFIG_CPU_SUBTYPE_SH7720) || \ + defined(CONFIG_CPU_SUBTYPE_SH7721) +#define UBC_BARA 0xa4ffffb0 +#define UBC_BAMRA 0xa4ffffb4 +#define UBC_BBRA 0xa4ffffb8 +#define UBC_BASRA 0xffffffe4 +#define UBC_BARB 0xa4ffffa0 +#define UBC_BAMRB 0xa4ffffa4 +#define UBC_BBRB 0xa4ffffa8 +#define UBC_BASRB 0xffffffe8 +#define UBC_BDRB 0xa4ffff90 +#define UBC_BDMRB 0xa4ffff94 +#define UBC_BRCR 0xa4ffff98 +#else +#define UBC_BARA 0xffffffb0 +#define UBC_BAMRA 0xffffffb4 +#define UBC_BBRA 0xffffffb8 +#define UBC_BASRA 0xffffffe4 +#define UBC_BARB 0xffffffa0 +#define UBC_BAMRB 0xffffffa4 +#define UBC_BBRB 0xffffffa8 +#define UBC_BASRB 0xffffffe8 +#define UBC_BDRB 0xffffff90 +#define UBC_BDMRB 0xffffff94 +#define UBC_BRCR 0xffffff98 +#endif + +#endif /* __ASM_CPU_SH3_UBC_H */ diff --git a/arch/sh/include/cpu-sh3/cpu/watchdog.h b/arch/sh/include/cpu-sh3/cpu/watchdog.h new file mode 100644 index 000000000000..4ee0347298d8 --- /dev/null +++ b/arch/sh/include/cpu-sh3/cpu/watchdog.h @@ -0,0 +1,25 @@ +/* + * include/asm-sh/cpu-sh3/watchdog.h + * + * Copyright (C) 2002, 2003 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_CPU_SH3_WATCHDOG_H +#define __ASM_CPU_SH3_WATCHDOG_H + +/* Register definitions */ +#define WTCNT 0xffffff84 +#define WTCSR 0xffffff86 + +/* Bit definitions */ +#define WTCSR_TME 0x80 +#define WTCSR_WT 0x40 +#define WTCSR_RSTS 0x20 +#define WTCSR_WOVF 0x10 +#define WTCSR_IOVF 0x08 + +#endif /* __ASM_CPU_SH3_WATCHDOG_H */ + diff --git a/arch/sh/include/cpu-sh4/cpu/addrspace.h b/arch/sh/include/cpu-sh4/cpu/addrspace.h new file mode 100644 index 000000000000..a3fa733c1c7d --- /dev/null +++ b/arch/sh/include/cpu-sh4/cpu/addrspace.h @@ -0,0 +1,35 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1999 by Kaz Kojima + * + * Defitions for the address spaces of the SH-4 CPUs. + */ +#ifndef __ASM_CPU_SH4_ADDRSPACE_H +#define __ASM_CPU_SH4_ADDRSPACE_H + +#define P0SEG 0x00000000 +#define P1SEG 0x80000000 +#define P2SEG 0xa0000000 +#define P3SEG 0xc0000000 +#define P4SEG 0xe0000000 + +/* Detailed P4SEG */ +#define P4SEG_STORE_QUE (P4SEG) +#define P4SEG_IC_ADDR 0xf0000000 +#define P4SEG_IC_DATA 0xf1000000 +#define P4SEG_ITLB_ADDR 0xf2000000 +#define P4SEG_ITLB_DATA 0xf3000000 +#define P4SEG_OC_ADDR 0xf4000000 +#define P4SEG_OC_DATA 0xf5000000 +#define P4SEG_TLB_ADDR 0xf6000000 +#define P4SEG_TLB_DATA 0xf7000000 +#define P4SEG_REG_BASE 0xff000000 + +#define PA_AREA5_IO 0xb4000000 /* Area 5 IO Memory */ +#define PA_AREA6_IO 0xb8000000 /* Area 6 IO Memory */ + +#endif /* __ASM_CPU_SH4_ADDRSPACE_H */ + diff --git a/arch/sh/include/cpu-sh4/cpu/cache.h b/arch/sh/include/cpu-sh4/cpu/cache.h new file mode 100644 index 000000000000..1c61ebf5c8e3 --- /dev/null +++ b/arch/sh/include/cpu-sh4/cpu/cache.h @@ -0,0 +1,42 @@ +/* + * include/asm-sh/cpu-sh4/cache.h + * + * Copyright (C) 1999 Niibe Yutaka + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_CPU_SH4_CACHE_H +#define __ASM_CPU_SH4_CACHE_H + +#define L1_CACHE_SHIFT 5 + +#define SH_CACHE_VALID 1 +#define SH_CACHE_UPDATED 2 +#define SH_CACHE_COMBINED 4 +#define SH_CACHE_ASSOC 8 + +#define CCR 0xff00001c /* Address of Cache Control Register */ +#define CCR_CACHE_OCE 0x0001 /* Operand Cache Enable */ +#define CCR_CACHE_WT 0x0002 /* Write-Through (for P0,U0,P3) (else writeback)*/ +#define CCR_CACHE_CB 0x0004 /* Copy-Back (for P1) (else writethrough) */ +#define CCR_CACHE_OCI 0x0008 /* OC Invalidate */ +#define CCR_CACHE_ORA 0x0020 /* OC RAM Mode */ +#define CCR_CACHE_OIX 0x0080 /* OC Index Enable */ +#define CCR_CACHE_ICE 0x0100 /* Instruction Cache Enable */ +#define CCR_CACHE_ICI 0x0800 /* IC Invalidate */ +#define CCR_CACHE_IIX 0x8000 /* IC Index Enable */ +#ifndef CONFIG_CPU_SH4A +#define CCR_CACHE_EMODE 0x80000000 /* EMODE Enable */ +#endif + +/* Default CCR setup: 8k+16k-byte cache,P1-wb,enable */ +#define CCR_CACHE_ENABLE (CCR_CACHE_OCE|CCR_CACHE_ICE) +#define CCR_CACHE_INVALIDATE (CCR_CACHE_OCI|CCR_CACHE_ICI) + +#define CACHE_IC_ADDRESS_ARRAY 0xf0000000 +#define CACHE_OC_ADDRESS_ARRAY 0xf4000000 + +#endif /* __ASM_CPU_SH4_CACHE_H */ + diff --git a/arch/sh/include/cpu-sh4/cpu/cacheflush.h b/arch/sh/include/cpu-sh4/cpu/cacheflush.h new file mode 100644 index 000000000000..065306d376eb --- /dev/null +++ b/arch/sh/include/cpu-sh4/cpu/cacheflush.h @@ -0,0 +1,43 @@ +/* + * include/asm-sh/cpu-sh4/cacheflush.h + * + * Copyright (C) 1999 Niibe Yutaka + * Copyright (C) 2003 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_CPU_SH4_CACHEFLUSH_H +#define __ASM_CPU_SH4_CACHEFLUSH_H + +/* + * Caches are broken on SH-4 (unless we use write-through + * caching; in which case they're only semi-broken), + * so we need them. + */ +void flush_cache_all(void); +void flush_dcache_all(void); +void flush_cache_mm(struct mm_struct *mm); +#define flush_cache_dup_mm(mm) flush_cache_mm(mm) +void flush_cache_range(struct vm_area_struct *vma, unsigned long start, + unsigned long end); +void flush_cache_page(struct vm_area_struct *vma, unsigned long addr, + unsigned long pfn); +void flush_dcache_page(struct page *pg); + +#define flush_dcache_mmap_lock(mapping) do { } while (0) +#define flush_dcache_mmap_unlock(mapping) do { } while (0) + +void flush_icache_range(unsigned long start, unsigned long end); +void flush_icache_user_range(struct vm_area_struct *vma, struct page *page, + unsigned long addr, int len); + +#define flush_icache_page(vma,pg) do { } while (0) + +/* Initialization of P3 area for copy_user_page */ +void p3_cache_init(void); + +#define PG_mapped PG_arch_1 + +#endif /* __ASM_CPU_SH4_CACHEFLUSH_H */ diff --git a/arch/sh/include/cpu-sh4/cpu/dma-sh7780.h b/arch/sh/include/cpu-sh4/cpu/dma-sh7780.h new file mode 100644 index 000000000000..71b426a6e482 --- /dev/null +++ b/arch/sh/include/cpu-sh4/cpu/dma-sh7780.h @@ -0,0 +1,39 @@ +#ifndef __ASM_SH_CPU_SH4_DMA_SH7780_H +#define __ASM_SH_CPU_SH4_DMA_SH7780_H + +#define REQ_HE 0x000000C0 +#define REQ_H 0x00000080 +#define REQ_LE 0x00000040 +#define TM_BURST 0x0000020 +#define TS_8 0x00000000 +#define TS_16 0x00000008 +#define TS_32 0x00000010 +#define TS_16BLK 0x00000018 +#define TS_32BLK 0x00100000 + +/* + * The SuperH DMAC supports a number of transmit sizes, we list them here, + * with their respective values as they appear in the CHCR registers. + * + * Defaults to a 64-bit transfer size. + */ +enum { + XMIT_SZ_8BIT, + XMIT_SZ_16BIT, + XMIT_SZ_32BIT, + XMIT_SZ_128BIT, + XMIT_SZ_256BIT, +}; + +/* + * The DMA count is defined as the number of bytes to transfer. + */ +static unsigned int ts_shift[] __maybe_unused = { + [XMIT_SZ_8BIT] = 0, + [XMIT_SZ_16BIT] = 1, + [XMIT_SZ_32BIT] = 2, + [XMIT_SZ_128BIT] = 4, + [XMIT_SZ_256BIT] = 5, +}; + +#endif /* __ASM_SH_CPU_SH4_DMA_SH7780_H */ diff --git a/arch/sh/include/cpu-sh4/cpu/dma.h b/arch/sh/include/cpu-sh4/cpu/dma.h new file mode 100644 index 000000000000..235b7cd1fc9a --- /dev/null +++ b/arch/sh/include/cpu-sh4/cpu/dma.h @@ -0,0 +1,65 @@ +#ifndef __ASM_CPU_SH4_DMA_H +#define __ASM_CPU_SH4_DMA_H + +#define DMAOR_INIT ( 0x8000 | DMAOR_DME ) + +/* SH7751/7760/7780 DMA IRQ sources */ +#define DMTE0_IRQ 34 +#define DMTE1_IRQ 35 +#define DMTE2_IRQ 36 +#define DMTE3_IRQ 37 +#define DMTE4_IRQ 44 +#define DMTE5_IRQ 45 +#define DMTE6_IRQ 46 +#define DMTE7_IRQ 47 +#define DMAE_IRQ 38 + +#ifdef CONFIG_CPU_SH4A +#define SH_DMAC_BASE 0xfc808020 + +#define CHCR_TS_MASK 0x18 +#define CHCR_TS_SHIFT 3 + +#include <cpu/dma-sh7780.h> +#else +#define SH_DMAC_BASE 0xffa00000 + +/* Definitions for the SuperH DMAC */ +#define TM_BURST 0x0000080 +#define TS_8 0x00000010 +#define TS_16 0x00000020 +#define TS_32 0x00000030 +#define TS_64 0x00000000 + +#define CHCR_TS_MASK 0x70 +#define CHCR_TS_SHIFT 4 + +#define DMAOR_COD 0x00000008 + +/* + * The SuperH DMAC supports a number of transmit sizes, we list them here, + * with their respective values as they appear in the CHCR registers. + * + * Defaults to a 64-bit transfer size. + */ +enum { + XMIT_SZ_64BIT, + XMIT_SZ_8BIT, + XMIT_SZ_16BIT, + XMIT_SZ_32BIT, + XMIT_SZ_256BIT, +}; + +/* + * The DMA count is defined as the number of bytes to transfer. + */ +static unsigned int ts_shift[] __maybe_unused = { + [XMIT_SZ_64BIT] = 3, + [XMIT_SZ_8BIT] = 0, + [XMIT_SZ_16BIT] = 1, + [XMIT_SZ_32BIT] = 2, + [XMIT_SZ_256BIT] = 5, +}; +#endif + +#endif /* __ASM_CPU_SH4_DMA_H */ diff --git a/arch/sh/include/cpu-sh4/cpu/fpu.h b/arch/sh/include/cpu-sh4/cpu/fpu.h new file mode 100644 index 000000000000..febef7342528 --- /dev/null +++ b/arch/sh/include/cpu-sh4/cpu/fpu.h @@ -0,0 +1,32 @@ +/* + * linux/arch/sh/kernel/cpu/sh4/sh4_fpu.h + * + * Copyright (C) 2006 STMicroelectronics Limited + * Author: Carl Shaw <carl.shaw@st.com> + * + * May be copied or modified under the terms of the GNU General Public + * License Version 2. See linux/COPYING for more information. + * + * Definitions for SH4 FPU operations + */ + +#ifndef __CPU_SH4_FPU_H +#define __CPU_SH4_FPU_H + +#define FPSCR_ENABLE_MASK 0x00000f80UL + +#define FPSCR_FMOV_DOUBLE (1<<1) + +#define FPSCR_CAUSE_INEXACT (1<<12) +#define FPSCR_CAUSE_UNDERFLOW (1<<13) +#define FPSCR_CAUSE_OVERFLOW (1<<14) +#define FPSCR_CAUSE_DIVZERO (1<<15) +#define FPSCR_CAUSE_INVALID (1<<16) +#define FPSCR_CAUSE_ERROR (1<<17) + +#define FPSCR_DBL_PRECISION (1<<19) +#define FPSCR_ROUNDING_MODE(x) ((x >> 20) & 3) +#define FPSCR_RM_NEAREST (0) +#define FPSCR_RM_ZERO (1) + +#endif diff --git a/arch/sh/include/cpu-sh4/cpu/freq.h b/arch/sh/include/cpu-sh4/cpu/freq.h new file mode 100644 index 000000000000..c23af81c2e70 --- /dev/null +++ b/arch/sh/include/cpu-sh4/cpu/freq.h @@ -0,0 +1,44 @@ +/* + * include/asm-sh/cpu-sh4/freq.h + * + * Copyright (C) 2002, 2003 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_CPU_SH4_FREQ_H +#define __ASM_CPU_SH4_FREQ_H + +#if defined(CONFIG_CPU_SUBTYPE_SH7722) || \ + defined(CONFIG_CPU_SUBTYPE_SH7723) || \ + defined(CONFIG_CPU_SUBTYPE_SH7343) || \ + defined(CONFIG_CPU_SUBTYPE_SH7366) +#define FRQCR 0xa4150000 +#define VCLKCR 0xa4150004 +#define SCLKACR 0xa4150008 +#define SCLKBCR 0xa415000c +#define IrDACLKCR 0xa4150010 +#define MSTPCR0 0xa4150030 +#define MSTPCR1 0xa4150034 +#define MSTPCR2 0xa4150038 +#elif defined(CONFIG_CPU_SUBTYPE_SH7763) || \ + defined(CONFIG_CPU_SUBTYPE_SH7780) +#define FRQCR 0xffc80000 +#elif defined(CONFIG_CPU_SUBTYPE_SH7785) +#define FRQCR0 0xffc80000 +#define FRQCR1 0xffc80004 +#define FRQMR1 0xffc80014 +#elif defined(CONFIG_CPU_SUBTYPE_SHX3) +#define FRQCR 0xffc00014 +#else +#define FRQCR 0xffc00000 +#define FRQCR_PSTBY 0x0200 +#define FRQCR_PLLEN 0x0400 +#define FRQCR_CKOEN 0x0800 +#endif +#define MIN_DIVISOR_NR 0 +#define MAX_DIVISOR_NR 3 + +#endif /* __ASM_CPU_SH4_FREQ_H */ + diff --git a/arch/sh/include/cpu-sh4/cpu/mmu_context.h b/arch/sh/include/cpu-sh4/cpu/mmu_context.h new file mode 100644 index 000000000000..9ea8eb27b18e --- /dev/null +++ b/arch/sh/include/cpu-sh4/cpu/mmu_context.h @@ -0,0 +1,63 @@ +/* + * include/asm-sh/cpu-sh4/mmu_context.h + * + * Copyright (C) 1999 Niibe Yutaka + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_CPU_SH4_MMU_CONTEXT_H +#define __ASM_CPU_SH4_MMU_CONTEXT_H + +#define MMU_PTEH 0xFF000000 /* Page table entry register HIGH */ +#define MMU_PTEL 0xFF000004 /* Page table entry register LOW */ +#define MMU_TTB 0xFF000008 /* Translation table base register */ +#define MMU_TEA 0xFF00000C /* TLB Exception Address */ +#define MMU_PTEA 0xFF000034 /* Page table entry assistance register */ + +#define MMUCR 0xFF000010 /* MMU Control Register */ + +#define MMU_ITLB_ADDRESS_ARRAY 0xF2000000 +#define MMU_UTLB_ADDRESS_ARRAY 0xF6000000 +#define MMU_PAGE_ASSOC_BIT 0x80 + +#define MMUCR_TI (1<<2) + +#ifdef CONFIG_X2TLB +#define MMUCR_ME (1 << 7) +#else +#define MMUCR_ME (0) +#endif + +#if defined(CONFIG_32BIT) && defined(CONFIG_CPU_SUBTYPE_ST40) +#define MMUCR_SE (1 << 4) +#else +#define MMUCR_SE (0) +#endif + +#ifdef CONFIG_SH_STORE_QUEUES +#define MMUCR_SQMD (1 << 9) +#else +#define MMUCR_SQMD (0) +#endif + +#define MMU_NTLB_ENTRIES 64 +#define MMU_CONTROL_INIT (0x05|MMUCR_SQMD|MMUCR_ME|MMUCR_SE) + +#define MMU_ITLB_DATA_ARRAY 0xF3000000 +#define MMU_UTLB_DATA_ARRAY 0xF7000000 + +#define MMU_UTLB_ENTRIES 64 +#define MMU_U_ENTRY_SHIFT 8 +#define MMU_UTLB_VALID 0x100 +#define MMU_ITLB_ENTRIES 4 +#define MMU_I_ENTRY_SHIFT 8 +#define MMU_ITLB_VALID 0x100 + +#define TRA 0xff000020 +#define EXPEVT 0xff000024 +#define INTEVT 0xff000028 + +#endif /* __ASM_CPU_SH4_MMU_CONTEXT_H */ + diff --git a/arch/sh/include/cpu-sh4/cpu/rtc.h b/arch/sh/include/cpu-sh4/cpu/rtc.h new file mode 100644 index 000000000000..25b1e6adfe8c --- /dev/null +++ b/arch/sh/include/cpu-sh4/cpu/rtc.h @@ -0,0 +1,13 @@ +#ifndef __ASM_SH_CPU_SH4_RTC_H +#define __ASM_SH_CPU_SH4_RTC_H + +#ifdef CONFIG_CPU_SUBTYPE_SH7723 +#define rtc_reg_size sizeof(u16) +#else +#define rtc_reg_size sizeof(u32) +#endif + +#define RTC_BIT_INVERTED 0x40 /* bug on SH7750, SH7750S */ +#define RTC_DEF_CAPABILITIES RTC_CAP_4_DIGIT_YEAR + +#endif /* __ASM_SH_CPU_SH4_RTC_H */ diff --git a/arch/sh/include/cpu-sh4/cpu/sigcontext.h b/arch/sh/include/cpu-sh4/cpu/sigcontext.h new file mode 100644 index 000000000000..ab392f120e06 --- /dev/null +++ b/arch/sh/include/cpu-sh4/cpu/sigcontext.h @@ -0,0 +1,24 @@ +#ifndef __ASM_CPU_SH4_SIGCONTEXT_H +#define __ASM_CPU_SH4_SIGCONTEXT_H + +struct sigcontext { + unsigned long oldmask; + + /* CPU registers */ + unsigned long sc_regs[16]; + unsigned long sc_pc; + unsigned long sc_pr; + unsigned long sc_sr; + unsigned long sc_gbr; + unsigned long sc_mach; + unsigned long sc_macl; + + /* FPU registers */ + unsigned long sc_fpregs[16]; + unsigned long sc_xfpregs[16]; + unsigned int sc_fpscr; + unsigned int sc_fpul; + unsigned int sc_ownedfp; +}; + +#endif /* __ASM_CPU_SH4_SIGCONTEXT_H */ diff --git a/arch/sh/include/cpu-sh4/cpu/sq.h b/arch/sh/include/cpu-sh4/cpu/sq.h new file mode 100644 index 000000000000..586d6491816a --- /dev/null +++ b/arch/sh/include/cpu-sh4/cpu/sq.h @@ -0,0 +1,35 @@ +/* + * include/asm-sh/cpu-sh4/sq.h + * + * Copyright (C) 2001, 2002, 2003 Paul Mundt + * Copyright (C) 2001, 2002 M. R. Brown + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_CPU_SH4_SQ_H +#define __ASM_CPU_SH4_SQ_H + +#include <asm/addrspace.h> + +/* + * Store queues range from e0000000-e3fffffc, allowing approx. 64MB to be + * mapped to any physical address space. Since data is written (and aligned) + * to 32-byte boundaries, we need to be sure that all allocations are aligned. + */ +#define SQ_SIZE 32 +#define SQ_ALIGN_MASK (~(SQ_SIZE - 1)) +#define SQ_ALIGN(addr) (((addr)+SQ_SIZE-1) & SQ_ALIGN_MASK) + +#define SQ_QACR0 (P4SEG_REG_BASE + 0x38) +#define SQ_QACR1 (P4SEG_REG_BASE + 0x3c) +#define SQ_ADDRMAX (P4SEG_STORE_QUE + 0x04000000) + +/* arch/sh/kernel/cpu/sh4/sq.c */ +unsigned long sq_remap(unsigned long phys, unsigned int size, + const char *name, unsigned long flags); +void sq_unmap(unsigned long vaddr); +void sq_flush_range(unsigned long start, unsigned int len); + +#endif /* __ASM_CPU_SH4_SQ_H */ diff --git a/arch/sh/include/cpu-sh4/cpu/timer.h b/arch/sh/include/cpu-sh4/cpu/timer.h new file mode 100644 index 000000000000..d1e796b96888 --- /dev/null +++ b/arch/sh/include/cpu-sh4/cpu/timer.h @@ -0,0 +1,60 @@ +/* + * include/asm-sh/cpu-sh4/timer.h + * + * Copyright (C) 2004 Lineo Solutions, Inc. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_CPU_SH4_TIMER_H +#define __ASM_CPU_SH4_TIMER_H + +/* + * --------------------------------------------------------------------------- + * TMU Common definitions for SH4 processors + * SH7750S/SH7750R + * SH7751/SH7751R + * SH7760 + * SH-X3 + * --------------------------------------------------------------------------- + */ +#ifdef CONFIG_CPU_SUBTYPE_SHX3 +#define TMU_012_BASE 0xffc10000 +#define TMU_345_BASE 0xffc20000 +#else +#define TMU_012_BASE 0xffd80000 +#define TMU_345_BASE 0xfe100000 +#endif + +#define TMU_TOCR TMU_012_BASE /* Not supported on all CPUs */ + +#define TMU_012_TSTR (TMU_012_BASE + 0x04) +#define TMU_345_TSTR (TMU_345_BASE + 0x04) + +#define TMU0_TCOR (TMU_012_BASE + 0x08) +#define TMU0_TCNT (TMU_012_BASE + 0x0c) +#define TMU0_TCR (TMU_012_BASE + 0x10) + +#define TMU1_TCOR (TMU_012_BASE + 0x14) +#define TMU1_TCNT (TMU_012_BASE + 0x18) +#define TMU1_TCR (TMU_012_BASE + 0x1c) + +#define TMU2_TCOR (TMU_012_BASE + 0x20) +#define TMU2_TCNT (TMU_012_BASE + 0x24) +#define TMU2_TCR (TMU_012_BASE + 0x28) +#define TMU2_TCPR (TMU_012_BASE + 0x2c) + +#define TMU3_TCOR (TMU_345_BASE + 0x08) +#define TMU3_TCNT (TMU_345_BASE + 0x0c) +#define TMU3_TCR (TMU_345_BASE + 0x10) + +#define TMU4_TCOR (TMU_345_BASE + 0x14) +#define TMU4_TCNT (TMU_345_BASE + 0x18) +#define TMU4_TCR (TMU_345_BASE + 0x1c) + +#define TMU5_TCOR (TMU_345_BASE + 0x20) +#define TMU5_TCNT (TMU_345_BASE + 0x24) +#define TMU5_TCR (TMU_345_BASE + 0x28) + +#endif /* __ASM_CPU_SH4_TIMER_H */ diff --git a/arch/sh/include/cpu-sh4/cpu/ubc.h b/arch/sh/include/cpu-sh4/cpu/ubc.h new file mode 100644 index 000000000000..c86e17050935 --- /dev/null +++ b/arch/sh/include/cpu-sh4/cpu/ubc.h @@ -0,0 +1,64 @@ +/* + * include/asm-sh/cpu-sh4/ubc.h + * + * Copyright (C) 1999 Niibe Yutaka + * Copyright (C) 2003 Paul Mundt + * Copyright (C) 2006 Lineo Solutions Inc. support SH4A UBC + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_CPU_SH4_UBC_H +#define __ASM_CPU_SH4_UBC_H + +#if defined(CONFIG_CPU_SH4A) +#define UBC_CBR0 0xff200000 +#define UBC_CRR0 0xff200004 +#define UBC_CAR0 0xff200008 +#define UBC_CAMR0 0xff20000c +#define UBC_CBR1 0xff200020 +#define UBC_CRR1 0xff200024 +#define UBC_CAR1 0xff200028 +#define UBC_CAMR1 0xff20002c +#define UBC_CDR1 0xff200030 +#define UBC_CDMR1 0xff200034 +#define UBC_CETR1 0xff200038 +#define UBC_CCMFR 0xff200600 +#define UBC_CBCR 0xff200620 + +/* CBR */ +#define UBC_CBR_AIE (0x01<<30) +#define UBC_CBR_ID_INST (0x01<<4) +#define UBC_CBR_RW_READ (0x01<<1) +#define UBC_CBR_CE (0x01) + +#define UBC_CBR_AIV_MASK (0x00FF0000) +#define UBC_CBR_AIV_SHIFT (16) +#define UBC_CBR_AIV_SET(asid) (((asid)<<UBC_CBR_AIV_SHIFT) & UBC_CBR_AIV_MASK) + +#define UBC_CBR_INIT 0x20000000 + +/* CRR */ +#define UBC_CRR_RES (0x01<<13) +#define UBC_CRR_PCB (0x01<<1) +#define UBC_CRR_BIE (0x01) + +#define UBC_CRR_INIT 0x00002000 + +#else /* CONFIG_CPU_SH4 */ +#define UBC_BARA 0xff200000 +#define UBC_BAMRA 0xff200004 +#define UBC_BBRA 0xff200008 +#define UBC_BASRA 0xff000014 +#define UBC_BARB 0xff20000c +#define UBC_BAMRB 0xff200010 +#define UBC_BBRB 0xff200014 +#define UBC_BASRB 0xff000018 +#define UBC_BDRB 0xff200018 +#define UBC_BDMRB 0xff20001c +#define UBC_BRCR 0xff200020 +#endif /* CONFIG_CPU_SH4 */ + +#endif /* __ASM_CPU_SH4_UBC_H */ + diff --git a/arch/sh/include/cpu-sh4/cpu/watchdog.h b/arch/sh/include/cpu-sh4/cpu/watchdog.h new file mode 100644 index 000000000000..259f6a0ce23d --- /dev/null +++ b/arch/sh/include/cpu-sh4/cpu/watchdog.h @@ -0,0 +1,25 @@ +/* + * include/asm-sh/cpu-sh4/watchdog.h + * + * Copyright (C) 2002, 2003 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_CPU_SH4_WATCHDOG_H +#define __ASM_CPU_SH4_WATCHDOG_H + +/* Register definitions */ +#define WTCNT 0xffc00008 +#define WTCSR 0xffc0000c + +/* Bit definitions */ +#define WTCSR_TME 0x80 +#define WTCSR_WT 0x40 +#define WTCSR_RSTS 0x20 +#define WTCSR_WOVF 0x10 +#define WTCSR_IOVF 0x08 + +#endif /* __ASM_CPU_SH4_WATCHDOG_H */ + diff --git a/arch/sh/include/cpu-sh5/cpu/addrspace.h b/arch/sh/include/cpu-sh5/cpu/addrspace.h new file mode 100644 index 000000000000..dc36b9a03af6 --- /dev/null +++ b/arch/sh/include/cpu-sh5/cpu/addrspace.h @@ -0,0 +1,11 @@ +#ifndef __ASM_SH_CPU_SH5_ADDRSPACE_H +#define __ASM_SH_CPU_SH5_ADDRSPACE_H + +#define PHYS_PERIPHERAL_BLOCK 0x09000000 +#define PHYS_DMAC_BLOCK 0x0e000000 +#define PHYS_PCI_BLOCK 0x60000000 +#define PHYS_EMI_BLOCK 0xff000000 + +/* No segmentation.. */ + +#endif /* __ASM_SH_CPU_SH5_ADDRSPACE_H */ diff --git a/arch/sh/include/cpu-sh5/cpu/cache.h b/arch/sh/include/cpu-sh5/cpu/cache.h new file mode 100644 index 000000000000..ed050ab526f2 --- /dev/null +++ b/arch/sh/include/cpu-sh5/cpu/cache.h @@ -0,0 +1,97 @@ +#ifndef __ASM_SH_CPU_SH5_CACHE_H +#define __ASM_SH_CPU_SH5_CACHE_H + +/* + * include/asm-sh/cpu-sh5/cache.h + * + * Copyright (C) 2000, 2001 Paolo Alberelli + * Copyright (C) 2003, 2004 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#define L1_CACHE_SHIFT 5 + +/* Valid and Dirty bits */ +#define SH_CACHE_VALID (1LL<<0) +#define SH_CACHE_UPDATED (1LL<<57) + +/* Unimplemented compat bits.. */ +#define SH_CACHE_COMBINED 0 +#define SH_CACHE_ASSOC 0 + +/* Cache flags */ +#define SH_CACHE_MODE_WT (1LL<<0) +#define SH_CACHE_MODE_WB (1LL<<1) + +/* + * Control Registers. + */ +#define ICCR_BASE 0x01600000 /* Instruction Cache Control Register */ +#define ICCR_REG0 0 /* Register 0 offset */ +#define ICCR_REG1 1 /* Register 1 offset */ +#define ICCR0 ICCR_BASE+ICCR_REG0 +#define ICCR1 ICCR_BASE+ICCR_REG1 + +#define ICCR0_OFF 0x0 /* Set ICACHE off */ +#define ICCR0_ON 0x1 /* Set ICACHE on */ +#define ICCR0_ICI 0x2 /* Invalidate all in IC */ + +#define ICCR1_NOLOCK 0x0 /* Set No Locking */ + +#define OCCR_BASE 0x01E00000 /* Operand Cache Control Register */ +#define OCCR_REG0 0 /* Register 0 offset */ +#define OCCR_REG1 1 /* Register 1 offset */ +#define OCCR0 OCCR_BASE+OCCR_REG0 +#define OCCR1 OCCR_BASE+OCCR_REG1 + +#define OCCR0_OFF 0x0 /* Set OCACHE off */ +#define OCCR0_ON 0x1 /* Set OCACHE on */ +#define OCCR0_OCI 0x2 /* Invalidate all in OC */ +#define OCCR0_WT 0x4 /* Set OCACHE in WT Mode */ +#define OCCR0_WB 0x0 /* Set OCACHE in WB Mode */ + +#define OCCR1_NOLOCK 0x0 /* Set No Locking */ + +/* + * SH-5 + * A bit of description here, for neff=32. + * + * |<--- tag (19 bits) --->| + * +-----------------------------+-----------------+------+----------+------+ + * | | | ways |set index |offset| + * +-----------------------------+-----------------+------+----------+------+ + * ^ 2 bits 8 bits 5 bits + * +- Bit 31 + * + * Cacheline size is based on offset: 5 bits = 32 bytes per line + * A cache line is identified by a tag + set but OCACHETAG/ICACHETAG + * have a broader space for registers. These are outlined by + * CACHE_?C_*_STEP below. + * + */ + +/* Instruction cache */ +#define CACHE_IC_ADDRESS_ARRAY 0x01000000 + +/* Operand Cache */ +#define CACHE_OC_ADDRESS_ARRAY 0x01800000 + +/* These declarations relate to cache 'synonyms' in the operand cache. A + 'synonym' occurs where effective address bits overlap between those used for + indexing the cache sets and those passed to the MMU for translation. In the + case of SH5-101 & SH5-103, only bit 12 is affected for 4k pages. */ + +#define CACHE_OC_N_SYNBITS 1 /* Number of synonym bits */ +#define CACHE_OC_SYN_SHIFT 12 +/* Mask to select synonym bit(s) */ +#define CACHE_OC_SYN_MASK (((1UL<<CACHE_OC_N_SYNBITS)-1)<<CACHE_OC_SYN_SHIFT) + +/* + * Instruction cache can't be invalidated based on physical addresses. + * No Instruction Cache defines required, then. + */ + +#endif /* __ASM_SH_CPU_SH5_CACHE_H */ diff --git a/arch/sh/include/cpu-sh5/cpu/cacheflush.h b/arch/sh/include/cpu-sh5/cpu/cacheflush.h new file mode 100644 index 000000000000..5a11f0b7e66a --- /dev/null +++ b/arch/sh/include/cpu-sh5/cpu/cacheflush.h @@ -0,0 +1,33 @@ +#ifndef __ASM_SH_CPU_SH5_CACHEFLUSH_H +#define __ASM_SH_CPU_SH5_CACHEFLUSH_H + +#ifndef __ASSEMBLY__ + +struct vm_area_struct; +struct page; +struct mm_struct; + +extern void flush_cache_all(void); +extern void flush_cache_mm(struct mm_struct *mm); +extern void flush_cache_sigtramp(unsigned long vaddr); +extern void flush_cache_range(struct vm_area_struct *vma, unsigned long start, + unsigned long end); +extern void flush_cache_page(struct vm_area_struct *vma, unsigned long addr, unsigned long pfn); +extern void flush_dcache_page(struct page *pg); +extern void flush_icache_range(unsigned long start, unsigned long end); +extern void flush_icache_user_range(struct vm_area_struct *vma, + struct page *page, unsigned long addr, + int len); + +#define flush_cache_dup_mm(mm) flush_cache_mm(mm) + +#define flush_dcache_mmap_lock(mapping) do { } while (0) +#define flush_dcache_mmap_unlock(mapping) do { } while (0) + +#define flush_icache_page(vma, page) do { } while (0) +void p3_cache_init(void); + +#endif /* __ASSEMBLY__ */ + +#endif /* __ASM_SH_CPU_SH5_CACHEFLUSH_H */ + diff --git a/arch/sh/include/cpu-sh5/cpu/dma.h b/arch/sh/include/cpu-sh5/cpu/dma.h new file mode 100644 index 000000000000..7bf6bb3d35ed --- /dev/null +++ b/arch/sh/include/cpu-sh5/cpu/dma.h @@ -0,0 +1,6 @@ +#ifndef __ASM_SH_CPU_SH5_DMA_H +#define __ASM_SH_CPU_SH5_DMA_H + +/* Nothing yet */ + +#endif /* __ASM_SH_CPU_SH5_DMA_H */ diff --git a/arch/sh/include/cpu-sh5/cpu/irq.h b/arch/sh/include/cpu-sh5/cpu/irq.h new file mode 100644 index 000000000000..f0f0756e6e84 --- /dev/null +++ b/arch/sh/include/cpu-sh5/cpu/irq.h @@ -0,0 +1,117 @@ +#ifndef __ASM_SH_CPU_SH5_IRQ_H +#define __ASM_SH_CPU_SH5_IRQ_H + +/* + * include/asm-sh/cpu-sh5/irq.h + * + * Copyright (C) 2000, 2001 Paolo Alberelli + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + + +/* + * Encoded IRQs are not considered worth to be supported. + * Main reason is that there's no per-encoded-interrupt + * enable/disable mechanism (as there was in SH3/4). + * An all enabled/all disabled is worth only if there's + * a cascaded IC to disable/enable/ack on. Until such + * IC is available there's no such support. + * + * Presumably Encoded IRQs may use extra IRQs beyond 64, + * below. Some logic must be added to cope with IRQ_IRL? + * in an exclusive way. + * + * Priorities are set at Platform level, when IRQ_IRL0-3 + * are set to 0 Encoding is allowed. Otherwise it's not + * allowed. + */ + +/* Independent IRQs */ +#define IRQ_IRL0 0 +#define IRQ_IRL1 1 +#define IRQ_IRL2 2 +#define IRQ_IRL3 3 + +#define IRQ_INTA 4 +#define IRQ_INTB 5 +#define IRQ_INTC 6 +#define IRQ_INTD 7 + +#define IRQ_SERR 12 +#define IRQ_ERR 13 +#define IRQ_PWR3 14 +#define IRQ_PWR2 15 +#define IRQ_PWR1 16 +#define IRQ_PWR0 17 + +#define IRQ_DMTE0 18 +#define IRQ_DMTE1 19 +#define IRQ_DMTE2 20 +#define IRQ_DMTE3 21 +#define IRQ_DAERR 22 + +#define IRQ_TUNI0 32 +#define IRQ_TUNI1 33 +#define IRQ_TUNI2 34 +#define IRQ_TICPI2 35 + +#define IRQ_ATI 36 +#define IRQ_PRI 37 +#define IRQ_CUI 38 + +#define IRQ_ERI 39 +#define IRQ_RXI 40 +#define IRQ_BRI 41 +#define IRQ_TXI 42 + +#define IRQ_ITI 63 + +#define NR_INTC_IRQS 64 + +#ifdef CONFIG_SH_CAYMAN +#define NR_EXT_IRQS 32 +#define START_EXT_IRQS 64 + +/* PCI bus 2 uses encoded external interrupts on the Cayman board */ +#define IRQ_P2INTA (START_EXT_IRQS + (3*8) + 0) +#define IRQ_P2INTB (START_EXT_IRQS + (3*8) + 1) +#define IRQ_P2INTC (START_EXT_IRQS + (3*8) + 2) +#define IRQ_P2INTD (START_EXT_IRQS + (3*8) + 3) + +#define I8042_KBD_IRQ (START_EXT_IRQS + 2) +#define I8042_AUX_IRQ (START_EXT_IRQS + 6) + +#define IRQ_CFCARD (START_EXT_IRQS + 7) +#define IRQ_PCMCIA (0) + +#else +#define NR_EXT_IRQS 0 +#endif + +/* Default IRQs, fixed */ +#define TIMER_IRQ IRQ_TUNI0 +#define RTC_IRQ IRQ_CUI + +/* Default Priorities, Platform may choose differently */ +#define NO_PRIORITY 0 /* Disabled */ +#define TIMER_PRIORITY 2 +#define RTC_PRIORITY TIMER_PRIORITY +#define SCIF_PRIORITY 3 +#define INTD_PRIORITY 3 +#define IRL3_PRIORITY 4 +#define INTC_PRIORITY 6 +#define IRL2_PRIORITY 7 +#define INTB_PRIORITY 9 +#define IRL1_PRIORITY 10 +#define INTA_PRIORITY 12 +#define IRL0_PRIORITY 13 +#define TOP_PRIORITY 15 + +extern int intc_evt_to_irq[(0xE20/0x20)+1]; +int intc_irq_describe(char* p, int irq); +extern int platform_int_priority[NR_INTC_IRQS]; + +#endif /* __ASM_SH_CPU_SH5_IRQ_H */ diff --git a/arch/sh/include/cpu-sh5/cpu/mmu_context.h b/arch/sh/include/cpu-sh5/cpu/mmu_context.h new file mode 100644 index 000000000000..68a1d2cff457 --- /dev/null +++ b/arch/sh/include/cpu-sh5/cpu/mmu_context.h @@ -0,0 +1,21 @@ +#ifndef __ASM_SH_CPU_SH5_MMU_CONTEXT_H +#define __ASM_SH_CPU_SH5_MMU_CONTEXT_H + +/* Common defines */ +#define TLB_STEP 0x00000010 +#define TLB_PTEH 0x00000000 +#define TLB_PTEL 0x00000008 + +/* PTEH defines */ +#define PTEH_ASID_SHIFT 2 +#define PTEH_VALID 0x0000000000000001 +#define PTEH_SHARED 0x0000000000000002 +#define PTEH_MATCH_ASID 0x00000000000003ff + +#ifndef __ASSEMBLY__ +/* This has to be a common function because the next location to fill + * information is shared. */ +extern void __do_tlb_refill(unsigned long address, unsigned long long is_text_not_data, pte_t *pte); +#endif /* __ASSEMBLY__ */ + +#endif /* __ASM_SH_CPU_SH5_MMU_CONTEXT_H */ diff --git a/arch/sh/include/cpu-sh5/cpu/registers.h b/arch/sh/include/cpu-sh5/cpu/registers.h new file mode 100644 index 000000000000..6664ea6f1566 --- /dev/null +++ b/arch/sh/include/cpu-sh5/cpu/registers.h @@ -0,0 +1,106 @@ +#ifndef __ASM_SH_CPU_SH5_REGISTERS_H +#define __ASM_SH_CPU_SH5_REGISTERS_H + +/* + * include/asm-sh/cpu-sh5/registers.h + * + * Copyright (C) 2000, 2001 Paolo Alberelli + * Copyright (C) 2004 Richard Curnow + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#ifdef __ASSEMBLY__ +/* ===================================================================== +** +** Section 1: acts on assembly sources pre-processed by GPP ( <source.S>). +** Assigns symbolic names to control & target registers. +*/ + +/* + * Define some useful aliases for control registers. + */ +#define SR cr0 +#define SSR cr1 +#define PSSR cr2 + /* cr3 UNDEFINED */ +#define INTEVT cr4 +#define EXPEVT cr5 +#define PEXPEVT cr6 +#define TRA cr7 +#define SPC cr8 +#define PSPC cr9 +#define RESVEC cr10 +#define VBR cr11 + /* cr12 UNDEFINED */ +#define TEA cr13 + /* cr14-cr15 UNDEFINED */ +#define DCR cr16 +#define KCR0 cr17 +#define KCR1 cr18 + /* cr19-cr31 UNDEFINED */ + /* cr32-cr61 RESERVED */ +#define CTC cr62 +#define USR cr63 + +/* + * ABI dependent registers (general purpose set) + */ +#define RET r2 +#define ARG1 r2 +#define ARG2 r3 +#define ARG3 r4 +#define ARG4 r5 +#define ARG5 r6 +#define ARG6 r7 +#define SP r15 +#define LINK r18 +#define ZERO r63 + +/* + * Status register defines: used only by assembly sources (and + * syntax independednt) + */ +#define SR_RESET_VAL 0x0000000050008000 +#define SR_HARMLESS 0x00000000500080f0 /* Write ignores for most */ +#define SR_ENABLE_FPU 0xffffffffffff7fff /* AND with this */ + +#if defined (CONFIG_SH64_SR_WATCH) +#define SR_ENABLE_MMU 0x0000000084000000 /* OR with this */ +#else +#define SR_ENABLE_MMU 0x0000000080000000 /* OR with this */ +#endif + +#define SR_UNBLOCK_EXC 0xffffffffefffffff /* AND with this */ +#define SR_BLOCK_EXC 0x0000000010000000 /* OR with this */ + +#else /* Not __ASSEMBLY__ syntax */ + +/* +** Stringify reg. name +*/ +#define __str(x) #x + +/* Stringify control register names for use in inline assembly */ +#define __SR __str(SR) +#define __SSR __str(SSR) +#define __PSSR __str(PSSR) +#define __INTEVT __str(INTEVT) +#define __EXPEVT __str(EXPEVT) +#define __PEXPEVT __str(PEXPEVT) +#define __TRA __str(TRA) +#define __SPC __str(SPC) +#define __PSPC __str(PSPC) +#define __RESVEC __str(RESVEC) +#define __VBR __str(VBR) +#define __TEA __str(TEA) +#define __DCR __str(DCR) +#define __KCR0 __str(KCR0) +#define __KCR1 __str(KCR1) +#define __CTC __str(CTC) +#define __USR __str(USR) + +#endif /* __ASSEMBLY__ */ +#endif /* __ASM_SH_CPU_SH5_REGISTERS_H */ diff --git a/arch/sh/include/cpu-sh5/cpu/rtc.h b/arch/sh/include/cpu-sh5/cpu/rtc.h new file mode 100644 index 000000000000..12ea0ed144e1 --- /dev/null +++ b/arch/sh/include/cpu-sh5/cpu/rtc.h @@ -0,0 +1,8 @@ +#ifndef __ASM_SH_CPU_SH5_RTC_H +#define __ASM_SH_CPU_SH5_RTC_H + +#define rtc_reg_size sizeof(u32) +#define RTC_BIT_INVERTED 0 /* The SH-5 RTC is surprisingly sane! */ +#define RTC_DEF_CAPABILITIES RTC_CAP_4_DIGIT_YEAR + +#endif /* __ASM_SH_CPU_SH5_RTC_H */ diff --git a/arch/sh/include/mach-dreamcast/mach/dma.h b/arch/sh/include/mach-dreamcast/mach/dma.h new file mode 100644 index 000000000000..ddd68e788705 --- /dev/null +++ b/arch/sh/include/mach-dreamcast/mach/dma.h @@ -0,0 +1,34 @@ +/* + * include/asm-sh/dreamcast/dma.h + * + * Copyright (C) 2003 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_SH_DREAMCAST_DMA_H +#define __ASM_SH_DREAMCAST_DMA_H + +/* Number of DMA channels */ +#define ONCHIP_NR_DMA_CHANNELS 4 +#define G2_NR_DMA_CHANNELS 4 +#define PVR2_NR_DMA_CHANNELS 1 + +/* Channels for cascading */ +#define PVR2_CASCADE_CHAN 2 +#define G2_CASCADE_CHAN 3 + +/* PVR2 DMA Registers */ +#define PVR2_DMA_BASE 0xa05f6800 +#define PVR2_DMA_ADDR (PVR2_DMA_BASE + 0) +#define PVR2_DMA_COUNT (PVR2_DMA_BASE + 4) +#define PVR2_DMA_MODE (PVR2_DMA_BASE + 8) +#define PVR2_DMA_LMMODE0 (PVR2_DMA_BASE + 132) +#define PVR2_DMA_LMMODE1 (PVR2_DMA_BASE + 136) + +/* G2 DMA Register */ +#define G2_DMA_BASE 0xa05f7800 + +#endif /* __ASM_SH_DREAMCAST_DMA_H */ + diff --git a/arch/sh/include/mach-dreamcast/mach/maple.h b/arch/sh/include/mach-dreamcast/mach/maple.h new file mode 100644 index 000000000000..51f6a87f1f11 --- /dev/null +++ b/arch/sh/include/mach-dreamcast/mach/maple.h @@ -0,0 +1,37 @@ +#ifndef __ASM_MAPLE_H +#define __ASM_MAPLE_H + +#define MAPLE_PORTS 4 +#define MAPLE_PNP_INTERVAL HZ +#define MAPLE_MAXPACKETS 8 +#define MAPLE_DMA_ORDER 14 +#define MAPLE_DMA_SIZE (1 << MAPLE_DMA_ORDER) +#define MAPLE_DMA_PAGES ((MAPLE_DMA_ORDER > PAGE_SHIFT) ? \ + MAPLE_DMA_ORDER - PAGE_SHIFT : 0) + +/* Maple Bus registers */ +#define MAPLE_BASE 0xa05f6c00 +#define MAPLE_DMAADDR (MAPLE_BASE+0x04) +#define MAPLE_TRIGTYPE (MAPLE_BASE+0x10) +#define MAPLE_ENABLE (MAPLE_BASE+0x14) +#define MAPLE_STATE (MAPLE_BASE+0x18) +#define MAPLE_SPEED (MAPLE_BASE+0x80) +#define MAPLE_RESET (MAPLE_BASE+0x8c) + +#define MAPLE_MAGIC 0x6155404f +#define MAPLE_2MBPS 0 +#define MAPLE_TIMEOUT(n) ((n)<<15) + +/* Function codes */ +#define MAPLE_FUNC_CONTROLLER 0x001 +#define MAPLE_FUNC_MEMCARD 0x002 +#define MAPLE_FUNC_LCD 0x004 +#define MAPLE_FUNC_CLOCK 0x008 +#define MAPLE_FUNC_MICROPHONE 0x010 +#define MAPLE_FUNC_ARGUN 0x020 +#define MAPLE_FUNC_KEYBOARD 0x040 +#define MAPLE_FUNC_LIGHTGUN 0x080 +#define MAPLE_FUNC_PURUPURU 0x100 +#define MAPLE_FUNC_MOUSE 0x200 + +#endif /* __ASM_MAPLE_H */ diff --git a/arch/sh/include/mach-dreamcast/mach/pci.h b/arch/sh/include/mach-dreamcast/mach/pci.h new file mode 100644 index 000000000000..75fc9009e092 --- /dev/null +++ b/arch/sh/include/mach-dreamcast/mach/pci.h @@ -0,0 +1,25 @@ +/* + * include/asm-sh/dreamcast/pci.h + * + * Copyright (C) 2001, 2002 M. R. Brown + * Copyright (C) 2002, 2003 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#ifndef __ASM_SH_DREAMCAST_PCI_H +#define __ASM_SH_DREAMCAST_PCI_H + +#include <mach-dreamcast/mach/sysasic.h> + +#define GAPSPCI_REGS 0x01001400 +#define GAPSPCI_DMA_BASE 0x01840000 +#define GAPSPCI_DMA_SIZE 32768 +#define GAPSPCI_BBA_CONFIG 0x01001600 +#define GAPSPCI_BBA_CONFIG_SIZE 0x2000 + +#define GAPSPCI_IRQ HW_EVENT_EXTERNAL + +#endif /* __ASM_SH_DREAMCAST_PCI_H */ + diff --git a/arch/sh/include/mach-dreamcast/mach/sysasic.h b/arch/sh/include/mach-dreamcast/mach/sysasic.h new file mode 100644 index 000000000000..f33426608a87 --- /dev/null +++ b/arch/sh/include/mach-dreamcast/mach/sysasic.h @@ -0,0 +1,43 @@ +/* include/asm-sh/dreamcast/sysasic.h + * + * Definitions for the Dreamcast System ASIC and related peripherals. + * + * Copyright (c) 2001 M. R. Brown <mrbrown@linuxdc.org> + * Copyright (C) 2003 Paul Mundt <lethal@linux-sh.org> + * + * This file is part of the LinuxDC project (www.linuxdc.org) + * + * Released under the terms of the GNU GPL v2.0. + * + */ +#ifndef __ASM_SH_DREAMCAST_SYSASIC_H +#define __ASM_SH_DREAMCAST_SYSASIC_H + +#include <asm/irq.h> + +/* Hardware events - + + Each of these events correspond to a bit within the Event Mask Registers/ + Event Status Registers. Because of the virtual IRQ numbering scheme, a + base offset must be used when calculating the virtual IRQ that each event + takes. +*/ + +#define HW_EVENT_IRQ_BASE 48 + +/* IRQ 13 */ +#define HW_EVENT_VSYNC (HW_EVENT_IRQ_BASE + 5) /* VSync */ +#define HW_EVENT_MAPLE_DMA (HW_EVENT_IRQ_BASE + 12) /* Maple DMA complete */ +#define HW_EVENT_GDROM_DMA (HW_EVENT_IRQ_BASE + 14) /* GD-ROM DMA complete */ +#define HW_EVENT_G2_DMA (HW_EVENT_IRQ_BASE + 15) /* G2 DMA complete */ +#define HW_EVENT_PVR2_DMA (HW_EVENT_IRQ_BASE + 19) /* PVR2 DMA complete */ + +/* IRQ 11 */ +#define HW_EVENT_GDROM_CMD (HW_EVENT_IRQ_BASE + 32) /* GD-ROM cmd. complete */ +#define HW_EVENT_AICA_SYS (HW_EVENT_IRQ_BASE + 33) /* AICA-related */ +#define HW_EVENT_EXTERNAL (HW_EVENT_IRQ_BASE + 35) /* Ext. (expansion) */ + +#define HW_EVENT_IRQ_MAX (HW_EVENT_IRQ_BASE + 95) + +#endif /* __ASM_SH_DREAMCAST_SYSASIC_H */ + diff --git a/arch/sh/include/mach-landisk/mach/gio.h b/arch/sh/include/mach-landisk/mach/gio.h new file mode 100644 index 000000000000..35d7368b718a --- /dev/null +++ b/arch/sh/include/mach-landisk/mach/gio.h @@ -0,0 +1,37 @@ +#ifndef __ASM_SH_LANDISK_GIO_H +#define __ASM_SH_LANDISK_GIO_H + +#include <linux/ioctl.h> + +/* version */ +#define VERSION_STR "1.00" + +/* Driver name */ +#define GIO_DRIVER_NAME "/dev/giodrv" + +/* Use 'k' as magic number */ +#define GIODRV_IOC_MAGIC 'k' + +#define GIODRV_IOCRESET _IO(GIODRV_IOC_MAGIC, 0) +/* + * S means "Set" through a ptr, + * T means "Tell" directly + * G means "Get" (to a pointed var) + * Q means "Query", response is on the return value + * X means "eXchange": G and S atomically + * H means "sHift": T and Q atomically + */ +#define GIODRV_IOCSGIODATA1 _IOW(GIODRV_IOC_MAGIC, 1, unsigned char *) +#define GIODRV_IOCGGIODATA1 _IOR(GIODRV_IOC_MAGIC, 2, unsigned char *) +#define GIODRV_IOCSGIODATA2 _IOW(GIODRV_IOC_MAGIC, 3, unsigned short *) +#define GIODRV_IOCGGIODATA2 _IOR(GIODRV_IOC_MAGIC, 4, unsigned short *) +#define GIODRV_IOCSGIODATA4 _IOW(GIODRV_IOC_MAGIC, 5, unsigned long *) +#define GIODRV_IOCGGIODATA4 _IOR(GIODRV_IOC_MAGIC, 6, unsigned long *) +#define GIODRV_IOCSGIOSETADDR _IOW(GIODRV_IOC_MAGIC, 7, unsigned long *) +#define GIODRV_IOCHARDRESET _IO(GIODRV_IOC_MAGIC, 8) /* debugging tool */ +#define GIODRV_IOC_MAXNR 8 + +#define GIO_READ 0x00000000 +#define GIO_WRITE 0x00000001 + +#endif /* __ASM_SH_LANDISK_GIO_H */ diff --git a/arch/sh/include/mach-landisk/mach/iodata_landisk.h b/arch/sh/include/mach-landisk/mach/iodata_landisk.h new file mode 100644 index 000000000000..6fb04ab38b9f --- /dev/null +++ b/arch/sh/include/mach-landisk/mach/iodata_landisk.h @@ -0,0 +1,42 @@ +#ifndef __ASM_SH_IODATA_LANDISK_H +#define __ASM_SH_IODATA_LANDISK_H + +/* + * linux/include/asm-sh/landisk/iodata_landisk.h + * + * Copyright (C) 2000 Atom Create Engineering Co., Ltd. + * + * IO-DATA LANDISK support + */ + +/* Box specific addresses. */ + +#define PA_USB 0xa4000000 /* USB Controller M66590 */ + +#define PA_ATARST 0xb0000000 /* ATA/FATA Access Control Register */ +#define PA_LED 0xb0000001 /* LED Control Register */ +#define PA_STATUS 0xb0000002 /* Switch Status Register */ +#define PA_SHUTDOWN 0xb0000003 /* Shutdown Control Register */ +#define PA_PCIPME 0xb0000004 /* PCI PME Status Register */ +#define PA_IMASK 0xb0000005 /* Interrupt Mask Register */ +/* 2003.10.31 I-O DATA NSD NWG add. for shutdown port clear */ +#define PA_PWRINT_CLR 0xb0000006 /* Shutdown Interrupt clear Register */ + +#define PA_PIDE_OFFSET 0x40 /* CF IDE Offset */ +#define PA_SIDE_OFFSET 0x40 /* HDD IDE Offset */ + +#define IRQ_PCIINTA 5 /* PCI INTA IRQ */ +#define IRQ_PCIINTB 6 /* PCI INTB IRQ */ +#define IRQ_PCIINDC 7 /* PCI INTC IRQ */ +#define IRQ_PCIINTD 8 /* PCI INTD IRQ */ +#define IRQ_ATA 9 /* ATA IRQ */ +#define IRQ_FATA 10 /* FATA IRQ */ +#define IRQ_POWER 11 /* Power Switch IRQ */ +#define IRQ_BUTTON 12 /* USL-5P Button IRQ */ +#define IRQ_FAULT 13 /* USL-5P Fault IRQ */ + +#define __IO_PREFIX landisk +#include <asm/io_generic.h> + +#endif /* __ASM_SH_IODATA_LANDISK_H */ + diff --git a/arch/sh/include/mach-se/mach/se.h b/arch/sh/include/mach-se/mach/se.h new file mode 100644 index 000000000000..eb23000e1bbe --- /dev/null +++ b/arch/sh/include/mach-se/mach/se.h @@ -0,0 +1,99 @@ +#ifndef __ASM_SH_HITACHI_SE_H +#define __ASM_SH_HITACHI_SE_H + +/* + * linux/include/asm-sh/hitachi_se.h + * + * Copyright (C) 2000 Kazumoto Kojima + * + * Hitachi SolutionEngine support + */ + +/* Box specific addresses. */ + +#define PA_ROM 0x00000000 /* EPROM */ +#define PA_ROM_SIZE 0x00400000 /* EPROM size 4M byte */ +#define PA_FROM 0x01000000 /* EPROM */ +#define PA_FROM_SIZE 0x00400000 /* EPROM size 4M byte */ +#define PA_EXT1 0x04000000 +#define PA_EXT1_SIZE 0x04000000 +#define PA_EXT2 0x08000000 +#define PA_EXT2_SIZE 0x04000000 +#define PA_SDRAM 0x0c000000 +#define PA_SDRAM_SIZE 0x04000000 + +#define PA_EXT4 0x12000000 +#define PA_EXT4_SIZE 0x02000000 +#define PA_EXT5 0x14000000 +#define PA_EXT5_SIZE 0x04000000 +#define PA_PCIC 0x18000000 /* MR-SHPC-01 PCMCIA */ + +#define PA_83902 0xb0000000 /* DP83902A */ +#define PA_83902_IF 0xb0040000 /* DP83902A remote io port */ +#define PA_83902_RST 0xb0080000 /* DP83902A reset port */ + +#define PA_SUPERIO 0xb0400000 /* SMC37C935A super io chip */ +#define PA_DIPSW0 0xb0800000 /* Dip switch 5,6 */ +#define PA_DIPSW1 0xb0800002 /* Dip switch 7,8 */ +#define PA_LED 0xb0c00000 /* LED */ +#if defined(CONFIG_CPU_SUBTYPE_SH7705) +#define PA_BCR 0xb0e00000 +#else +#define PA_BCR 0xb1400000 /* FPGA */ +#endif + +#define PA_MRSHPC 0xb83fffe0 /* MR-SHPC-01 PCMCIA controller */ +#define PA_MRSHPC_MW1 0xb8400000 /* MR-SHPC-01 memory window base */ +#define PA_MRSHPC_MW2 0xb8500000 /* MR-SHPC-01 attribute window base */ +#define PA_MRSHPC_IO 0xb8600000 /* MR-SHPC-01 I/O window base */ +#define MRSHPC_OPTION (PA_MRSHPC + 6) +#define MRSHPC_CSR (PA_MRSHPC + 8) +#define MRSHPC_ISR (PA_MRSHPC + 10) +#define MRSHPC_ICR (PA_MRSHPC + 12) +#define MRSHPC_CPWCR (PA_MRSHPC + 14) +#define MRSHPC_MW0CR1 (PA_MRSHPC + 16) +#define MRSHPC_MW1CR1 (PA_MRSHPC + 18) +#define MRSHPC_IOWCR1 (PA_MRSHPC + 20) +#define MRSHPC_MW0CR2 (PA_MRSHPC + 22) +#define MRSHPC_MW1CR2 (PA_MRSHPC + 24) +#define MRSHPC_IOWCR2 (PA_MRSHPC + 26) +#define MRSHPC_CDCR (PA_MRSHPC + 28) +#define MRSHPC_PCIC_INFO (PA_MRSHPC + 30) + +#define BCR_ILCRA (PA_BCR + 0) +#define BCR_ILCRB (PA_BCR + 2) +#define BCR_ILCRC (PA_BCR + 4) +#define BCR_ILCRD (PA_BCR + 6) +#define BCR_ILCRE (PA_BCR + 8) +#define BCR_ILCRF (PA_BCR + 10) +#define BCR_ILCRG (PA_BCR + 12) + +#if defined(CONFIG_CPU_SUBTYPE_SH7705) +#define IRQ_STNIC 12 +#define IRQ_CFCARD 14 +#else +#define IRQ_STNIC 10 +#define IRQ_CFCARD 7 +#endif + +/* SH Ether support (SH7710/SH7712) */ +/* Base address */ +#define SH_ETH0_BASE 0xA7000000 +#define SH_ETH1_BASE 0xA7000400 +/* PHY ID */ +#if defined(CONFIG_CPU_SUBTYPE_SH7710) +# define PHY_ID 0x00 +#elif defined(CONFIG_CPU_SUBTYPE_SH7712) +# define PHY_ID 0x01 +#endif +/* Ether IRQ */ +#define SH_ETH0_IRQ 80 +#define SH_ETH1_IRQ 81 +#define SH_TSU_IRQ 82 + +void init_se_IRQ(void); + +#define __IO_PREFIX se +#include <asm/io_generic.h> + +#endif /* __ASM_SH_HITACHI_SE_H */ diff --git a/arch/sh/include/mach-se/mach/se7206.h b/arch/sh/include/mach-se/mach/se7206.h new file mode 100644 index 000000000000..698eb80389ab --- /dev/null +++ b/arch/sh/include/mach-se/mach/se7206.h @@ -0,0 +1,13 @@ +#ifndef __ASM_SH_SE7206_H +#define __ASM_SH_SE7206_H + +#define PA_SMSC 0x30000000 +#define PA_MRSHPC 0x34000000 +#define PA_LED 0x31400000 + +void init_se7206_IRQ(void); + +#define __IO_PREFIX se7206 +#include <asm/io_generic.h> + +#endif /* __ASM_SH_SE7206_H */ diff --git a/arch/sh/include/mach-se/mach/se7343.h b/arch/sh/include/mach-se/mach/se7343.h new file mode 100644 index 000000000000..98458460e632 --- /dev/null +++ b/arch/sh/include/mach-se/mach/se7343.h @@ -0,0 +1,149 @@ +#ifndef __ASM_SH_HITACHI_SE7343_H +#define __ASM_SH_HITACHI_SE7343_H + +/* + * include/asm-sh/se/se7343.h + * + * Copyright (C) 2003 Takashi Kusuda <kusuda-takashi@hitachi-ul.co.jp> + * + * SH-Mobile SolutionEngine 7343 support + */ + +/* Box specific addresses. */ + +/* Area 0 */ +#define PA_ROM 0x00000000 /* EPROM */ +#define PA_ROM_SIZE 0x00400000 /* EPROM size 4M byte(Actually 2MB) */ +#define PA_FROM 0x00400000 /* Flash ROM */ +#define PA_FROM_SIZE 0x00400000 /* Flash size 4M byte */ +#define PA_SRAM 0x00800000 /* SRAM */ +#define PA_FROM_SIZE 0x00400000 /* SRAM size 4M byte */ +/* Area 1 */ +#define PA_EXT1 0x04000000 +#define PA_EXT1_SIZE 0x04000000 +/* Area 2 */ +#define PA_EXT2 0x08000000 +#define PA_EXT2_SIZE 0x04000000 +/* Area 3 */ +#define PA_SDRAM 0x0c000000 +#define PA_SDRAM_SIZE 0x04000000 +/* Area 4 */ +#define PA_PCIC 0x10000000 /* MR-SHPC-01 PCMCIA */ +#define PA_MRSHPC 0xb03fffe0 /* MR-SHPC-01 PCMCIA controller */ +#define PA_MRSHPC_MW1 0xb0400000 /* MR-SHPC-01 memory window base */ +#define PA_MRSHPC_MW2 0xb0500000 /* MR-SHPC-01 attribute window base */ +#define PA_MRSHPC_IO 0xb0600000 /* MR-SHPC-01 I/O window base */ +#define MRSHPC_OPTION (PA_MRSHPC + 6) +#define MRSHPC_CSR (PA_MRSHPC + 8) +#define MRSHPC_ISR (PA_MRSHPC + 10) +#define MRSHPC_ICR (PA_MRSHPC + 12) +#define MRSHPC_CPWCR (PA_MRSHPC + 14) +#define MRSHPC_MW0CR1 (PA_MRSHPC + 16) +#define MRSHPC_MW1CR1 (PA_MRSHPC + 18) +#define MRSHPC_IOWCR1 (PA_MRSHPC + 20) +#define MRSHPC_MW0CR2 (PA_MRSHPC + 22) +#define MRSHPC_MW1CR2 (PA_MRSHPC + 24) +#define MRSHPC_IOWCR2 (PA_MRSHPC + 26) +#define MRSHPC_CDCR (PA_MRSHPC + 28) +#define MRSHPC_PCIC_INFO (PA_MRSHPC + 30) +#define PA_LED 0xb0C00000 /* LED */ +#define LED_SHIFT 0 +#define PA_DIPSW 0xb0900000 /* Dip switch 31 */ +#define PA_CPLD_MODESET 0xb1400004 /* CPLD Mode set register */ +#define PA_CPLD_ST 0xb1400008 /* CPLD Interrupt status register */ +#define PA_CPLD_IMSK 0xb140000a /* CPLD Interrupt mask register */ +/* Area 5 */ +#define PA_EXT5 0x14000000 +#define PA_EXT5_SIZE 0x04000000 +/* Area 6 */ +#define PA_LCD1 0xb8000000 +#define PA_LCD2 0xb8800000 + +#define PORT_PACR 0xA4050100 +#define PORT_PBCR 0xA4050102 +#define PORT_PCCR 0xA4050104 +#define PORT_PDCR 0xA4050106 +#define PORT_PECR 0xA4050108 +#define PORT_PFCR 0xA405010A +#define PORT_PGCR 0xA405010C +#define PORT_PHCR 0xA405010E +#define PORT_PJCR 0xA4050110 +#define PORT_PKCR 0xA4050112 +#define PORT_PLCR 0xA4050114 +#define PORT_PMCR 0xA4050116 +#define PORT_PNCR 0xA4050118 +#define PORT_PQCR 0xA405011A +#define PORT_PRCR 0xA405011C +#define PORT_PSCR 0xA405011E +#define PORT_PTCR 0xA4050140 +#define PORT_PUCR 0xA4050142 +#define PORT_PVCR 0xA4050144 +#define PORT_PWCR 0xA4050146 +#define PORT_PYCR 0xA4050148 +#define PORT_PZCR 0xA405014A + +#define PORT_PSELA 0xA405014C +#define PORT_PSELB 0xA405014E +#define PORT_PSELC 0xA4050150 +#define PORT_PSELD 0xA4050152 +#define PORT_PSELE 0xA4050154 + +#define PORT_HIZCRA 0xA4050156 +#define PORT_HIZCRB 0xA4050158 +#define PORT_HIZCRC 0xA405015C + +#define PORT_DRVCR 0xA4050180 + +#define PORT_PADR 0xA4050120 +#define PORT_PBDR 0xA4050122 +#define PORT_PCDR 0xA4050124 +#define PORT_PDDR 0xA4050126 +#define PORT_PEDR 0xA4050128 +#define PORT_PFDR 0xA405012A +#define PORT_PGDR 0xA405012C +#define PORT_PHDR 0xA405012E +#define PORT_PJDR 0xA4050130 +#define PORT_PKDR 0xA4050132 +#define PORT_PLDR 0xA4050134 +#define PORT_PMDR 0xA4050136 +#define PORT_PNDR 0xA4050138 +#define PORT_PQDR 0xA405013A +#define PORT_PRDR 0xA405013C +#define PORT_PTDR 0xA4050160 +#define PORT_PUDR 0xA4050162 +#define PORT_PVDR 0xA4050164 +#define PORT_PWDR 0xA4050166 +#define PORT_PYDR 0xA4050168 + +#define FPGA_IN 0xb1400000 +#define FPGA_OUT 0xb1400002 + +#define __IO_PREFIX sh7343se +#include <asm/io_generic.h> + +#define IRQ0_IRQ 32 +#define IRQ1_IRQ 33 +#define IRQ4_IRQ 36 +#define IRQ5_IRQ 37 + +#define SE7343_FPGA_IRQ_MRSHPC0 0 +#define SE7343_FPGA_IRQ_MRSHPC1 1 +#define SE7343_FPGA_IRQ_MRSHPC2 2 +#define SE7343_FPGA_IRQ_MRSHPC3 3 +#define SE7343_FPGA_IRQ_SMC 6 /* EXT_IRQ2 */ +#define SE7343_FPGA_IRQ_USB 8 + +#define SE7343_FPGA_IRQ_NR 11 +#define SE7343_FPGA_IRQ_BASE 120 + +#define MRSHPC_IRQ3 (SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_MRSHPC3) +#define MRSHPC_IRQ2 (SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_MRSHPC2) +#define MRSHPC_IRQ1 (SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_MRSHPC1) +#define MRSHPC_IRQ0 (SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_MRSHPC0) +#define SMC_IRQ (SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_SMC) +#define USB_IRQ (SE7343_FPGA_IRQ_BASE + SE7343_FPGA_IRQ_USB) + +/* arch/sh/boards/se/7343/irq.c */ +void init_7343se_IRQ(void); + +#endif /* __ASM_SH_HITACHI_SE7343_H */ diff --git a/arch/sh/include/mach-se/mach/se7721.h b/arch/sh/include/mach-se/mach/se7721.h new file mode 100644 index 000000000000..b957f6041193 --- /dev/null +++ b/arch/sh/include/mach-se/mach/se7721.h @@ -0,0 +1,70 @@ +/* + * Copyright (C) 2008 Renesas Solutions Corp. + * + * Hitachi UL SolutionEngine 7721 Support. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + */ + +#ifndef __ASM_SH_SE7721_H +#define __ASM_SH_SE7721_H +#include <asm/addrspace.h> + +/* Box specific addresses. */ +#define SE_AREA0_WIDTH 2 /* Area0: 32bit */ +#define PA_ROM 0xa0000000 /* EPROM */ +#define PA_ROM_SIZE 0x00200000 /* EPROM size 2M byte */ +#define PA_FROM 0xa1000000 /* Flash-ROM */ +#define PA_FROM_SIZE 0x01000000 /* Flash-ROM size 16M byte */ +#define PA_EXT1 0xa4000000 +#define PA_EXT1_SIZE 0x04000000 +#define PA_SDRAM 0xaC000000 /* SDRAM(Area3) 64MB */ +#define PA_SDRAM_SIZE 0x04000000 + +#define PA_EXT4 0xb0000000 +#define PA_EXT4_SIZE 0x04000000 + +#define PA_PERIPHERAL 0xB8000000 + +#define PA_PCIC PA_PERIPHERAL +#define PA_MRSHPC (PA_PERIPHERAL + 0x003fffe0) +#define PA_MRSHPC_MW1 (PA_PERIPHERAL + 0x00400000) +#define PA_MRSHPC_MW2 (PA_PERIPHERAL + 0x00500000) +#define PA_MRSHPC_IO (PA_PERIPHERAL + 0x00600000) +#define MRSHPC_OPTION (PA_MRSHPC + 6) +#define MRSHPC_CSR (PA_MRSHPC + 8) +#define MRSHPC_ISR (PA_MRSHPC + 10) +#define MRSHPC_ICR (PA_MRSHPC + 12) +#define MRSHPC_CPWCR (PA_MRSHPC + 14) +#define MRSHPC_MW0CR1 (PA_MRSHPC + 16) +#define MRSHPC_MW1CR1 (PA_MRSHPC + 18) +#define MRSHPC_IOWCR1 (PA_MRSHPC + 20) +#define MRSHPC_MW0CR2 (PA_MRSHPC + 22) +#define MRSHPC_MW1CR2 (PA_MRSHPC + 24) +#define MRSHPC_IOWCR2 (PA_MRSHPC + 26) +#define MRSHPC_CDCR (PA_MRSHPC + 28) +#define MRSHPC_PCIC_INFO (PA_MRSHPC + 30) + +#define PA_LED 0xB6800000 /* 8bit LED */ +#define PA_FPGA 0xB7000000 /* FPGA base address */ + +#define MRSHPC_IRQ0 10 + +#define FPGA_ILSR1 (PA_FPGA + 0x02) +#define FPGA_ILSR2 (PA_FPGA + 0x03) +#define FPGA_ILSR3 (PA_FPGA + 0x04) +#define FPGA_ILSR4 (PA_FPGA + 0x05) +#define FPGA_ILSR5 (PA_FPGA + 0x06) +#define FPGA_ILSR6 (PA_FPGA + 0x07) +#define FPGA_ILSR7 (PA_FPGA + 0x08) +#define FPGA_ILSR8 (PA_FPGA + 0x09) + +void init_se7721_IRQ(void); + +#define __IO_PREFIX se7721 +#include <asm/io_generic.h> + +#endif /* __ASM_SH_SE7721_H */ diff --git a/arch/sh/include/mach-se/mach/se7722.h b/arch/sh/include/mach-se/mach/se7722.h new file mode 100644 index 000000000000..e971d9a82f4a --- /dev/null +++ b/arch/sh/include/mach-se/mach/se7722.h @@ -0,0 +1,112 @@ +#ifndef __ASM_SH_SE7722_H +#define __ASM_SH_SE7722_H + +/* + * linux/include/asm-sh/se7722.h + * + * Copyright (C) 2007 Nobuhiro Iwamatsu + * + * Hitachi UL SolutionEngine 7722 Support. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + */ +#include <asm/addrspace.h> + +/* Box specific addresses. */ +#define SE_AREA0_WIDTH 4 /* Area0: 32bit */ +#define PA_ROM 0xa0000000 /* EPROM */ +#define PA_ROM_SIZE 0x00200000 /* EPROM size 2M byte */ +#define PA_FROM 0xa1000000 /* Flash-ROM */ +#define PA_FROM_SIZE 0x01000000 /* Flash-ROM size 16M byte */ +#define PA_EXT1 0xa4000000 +#define PA_EXT1_SIZE 0x04000000 +#define PA_SDRAM 0xaC000000 /* DDR-SDRAM(Area3) 64MB */ +#define PA_SDRAM_SIZE 0x04000000 + +#define PA_EXT4 0xb0000000 +#define PA_EXT4_SIZE 0x04000000 + +#define PA_PERIPHERAL 0xB0000000 + +#define PA_PCIC PA_PERIPHERAL /* MR-SHPC-01 PCMCIA */ +#define PA_MRSHPC (PA_PERIPHERAL + 0x003fffe0) /* MR-SHPC-01 PCMCIA controller */ +#define PA_MRSHPC_MW1 (PA_PERIPHERAL + 0x00400000) /* MR-SHPC-01 memory window base */ +#define PA_MRSHPC_MW2 (PA_PERIPHERAL + 0x00500000) /* MR-SHPC-01 attribute window base */ +#define PA_MRSHPC_IO (PA_PERIPHERAL + 0x00600000) /* MR-SHPC-01 I/O window base */ +#define MRSHPC_OPTION (PA_MRSHPC + 6) +#define MRSHPC_CSR (PA_MRSHPC + 8) +#define MRSHPC_ISR (PA_MRSHPC + 10) +#define MRSHPC_ICR (PA_MRSHPC + 12) +#define MRSHPC_CPWCR (PA_MRSHPC + 14) +#define MRSHPC_MW0CR1 (PA_MRSHPC + 16) +#define MRSHPC_MW1CR1 (PA_MRSHPC + 18) +#define MRSHPC_IOWCR1 (PA_MRSHPC + 20) +#define MRSHPC_MW0CR2 (PA_MRSHPC + 22) +#define MRSHPC_MW1CR2 (PA_MRSHPC + 24) +#define MRSHPC_IOWCR2 (PA_MRSHPC + 26) +#define MRSHPC_CDCR (PA_MRSHPC + 28) +#define MRSHPC_PCIC_INFO (PA_MRSHPC + 30) + +#define PA_LED (PA_PERIPHERAL + 0x00800000) /* 8bit LED */ +#define PA_FPGA (PA_PERIPHERAL + 0x01800000) /* FPGA base address */ + +#define PA_LAN (PA_AREA6_IO + 0) /* SMC LAN91C111 */ +/* GPIO */ +#define FPGA_IN 0xb1840000UL +#define FPGA_OUT 0xb1840004UL + +#define PORT_PECR 0xA4050108UL +#define PORT_PJCR 0xA4050110UL +#define PORT_PSELD 0xA4050154UL +#define PORT_PSELB 0xA4050150UL + +#define PORT_PSELC 0xA4050152UL +#define PORT_PKCR 0xA4050112UL +#define PORT_PHCR 0xA405010EUL +#define PORT_PLCR 0xA4050114UL +#define PORT_PMCR 0xA4050116UL +#define PORT_PRCR 0xA405011CUL +#define PORT_PXCR 0xA4050148UL +#define PORT_PSELA 0xA405014EUL +#define PORT_PYCR 0xA405014AUL +#define PORT_PZCR 0xA405014CUL +#define PORT_HIZCRA 0xA4050158UL +#define PORT_HIZCRC 0xA405015CUL + +/* IRQ */ +#define IRQ0_IRQ 32 +#define IRQ1_IRQ 33 + +#define IRQ01_MODE 0xb1800000 +#define IRQ01_STS 0xb1800004 +#define IRQ01_MASK 0xb1800008 + +/* Bits in IRQ01_* registers */ + +#define SE7722_FPGA_IRQ_USB 0 /* IRQ0 */ +#define SE7722_FPGA_IRQ_SMC 1 /* IRQ0 */ +#define SE7722_FPGA_IRQ_MRSHPC0 2 /* IRQ1 */ +#define SE7722_FPGA_IRQ_MRSHPC1 3 /* IRQ1 */ +#define SE7722_FPGA_IRQ_MRSHPC2 4 /* IRQ1 */ +#define SE7722_FPGA_IRQ_MRSHPC3 5 /* IRQ1 */ + +#define SE7722_FPGA_IRQ_NR 6 +#define SE7722_FPGA_IRQ_BASE 110 + +#define MRSHPC_IRQ3 (SE7722_FPGA_IRQ_BASE + SE7722_FPGA_IRQ_MRSHPC3) +#define MRSHPC_IRQ2 (SE7722_FPGA_IRQ_BASE + SE7722_FPGA_IRQ_MRSHPC2) +#define MRSHPC_IRQ1 (SE7722_FPGA_IRQ_BASE + SE7722_FPGA_IRQ_MRSHPC1) +#define MRSHPC_IRQ0 (SE7722_FPGA_IRQ_BASE + SE7722_FPGA_IRQ_MRSHPC0) +#define SMC_IRQ (SE7722_FPGA_IRQ_BASE + SE7722_FPGA_IRQ_SMC) +#define USB_IRQ (SE7722_FPGA_IRQ_BASE + SE7722_FPGA_IRQ_USB) + +/* arch/sh/boards/se/7722/irq.c */ +void init_se7722_IRQ(void); + +#define __IO_PREFIX se7722 +#include <asm/io_generic.h> + +#endif /* __ASM_SH_SE7722_H */ diff --git a/arch/sh/include/mach-se/mach/se7751.h b/arch/sh/include/mach-se/mach/se7751.h new file mode 100644 index 000000000000..b36792ac5d66 --- /dev/null +++ b/arch/sh/include/mach-se/mach/se7751.h @@ -0,0 +1,73 @@ +#ifndef __ASM_SH_HITACHI_7751SE_H +#define __ASM_SH_HITACHI_7751SE_H + +/* + * linux/include/asm-sh/hitachi_7751se.h + * + * Copyright (C) 2000 Kazumoto Kojima + * + * Hitachi SolutionEngine support + + * Modified for 7751 Solution Engine by + * Ian da Silva and Jeremy Siegel, 2001. + */ + +/* Box specific addresses. */ + +#define PA_ROM 0x00000000 /* EPROM */ +#define PA_ROM_SIZE 0x00400000 /* EPROM size 4M byte */ +#define PA_FROM 0x01000000 /* EPROM */ +#define PA_FROM_SIZE 0x00400000 /* EPROM size 4M byte */ +#define PA_EXT1 0x04000000 +#define PA_EXT1_SIZE 0x04000000 +#define PA_EXT2 0x08000000 +#define PA_EXT2_SIZE 0x04000000 +#define PA_SDRAM 0x0c000000 +#define PA_SDRAM_SIZE 0x04000000 + +#define PA_EXT4 0x12000000 +#define PA_EXT4_SIZE 0x02000000 +#define PA_EXT5 0x14000000 +#define PA_EXT5_SIZE 0x04000000 +#define PA_PCIC 0x18000000 /* MR-SHPC-01 PCMCIA */ + +#define PA_DIPSW0 0xb9000000 /* Dip switch 5,6 */ +#define PA_DIPSW1 0xb9000002 /* Dip switch 7,8 */ +#define PA_LED 0xba000000 /* LED */ +#define PA_BCR 0xbb000000 /* FPGA on the MS7751SE01 */ + +#define PA_MRSHPC 0xb83fffe0 /* MR-SHPC-01 PCMCIA controller */ +#define PA_MRSHPC_MW1 0xb8400000 /* MR-SHPC-01 memory window base */ +#define PA_MRSHPC_MW2 0xb8500000 /* MR-SHPC-01 attribute window base */ +#define PA_MRSHPC_IO 0xb8600000 /* MR-SHPC-01 I/O window base */ +#define MRSHPC_MODE (PA_MRSHPC + 4) +#define MRSHPC_OPTION (PA_MRSHPC + 6) +#define MRSHPC_CSR (PA_MRSHPC + 8) +#define MRSHPC_ISR (PA_MRSHPC + 10) +#define MRSHPC_ICR (PA_MRSHPC + 12) +#define MRSHPC_CPWCR (PA_MRSHPC + 14) +#define MRSHPC_MW0CR1 (PA_MRSHPC + 16) +#define MRSHPC_MW1CR1 (PA_MRSHPC + 18) +#define MRSHPC_IOWCR1 (PA_MRSHPC + 20) +#define MRSHPC_MW0CR2 (PA_MRSHPC + 22) +#define MRSHPC_MW1CR2 (PA_MRSHPC + 24) +#define MRSHPC_IOWCR2 (PA_MRSHPC + 26) +#define MRSHPC_CDCR (PA_MRSHPC + 28) +#define MRSHPC_PCIC_INFO (PA_MRSHPC + 30) + +#define BCR_ILCRA (PA_BCR + 0) +#define BCR_ILCRB (PA_BCR + 2) +#define BCR_ILCRC (PA_BCR + 4) +#define BCR_ILCRD (PA_BCR + 6) +#define BCR_ILCRE (PA_BCR + 8) +#define BCR_ILCRF (PA_BCR + 10) +#define BCR_ILCRG (PA_BCR + 12) + +#define IRQ_79C973 13 + +void init_7751se_IRQ(void); + +#define __IO_PREFIX sh7751se +#include <asm/io_generic.h> + +#endif /* __ASM_SH_HITACHI_7751SE_H */ diff --git a/arch/sh/include/mach-se/mach/se7780.h b/arch/sh/include/mach-se/mach/se7780.h new file mode 100644 index 000000000000..40e9b41458cd --- /dev/null +++ b/arch/sh/include/mach-se/mach/se7780.h @@ -0,0 +1,108 @@ +#ifndef __ASM_SH_SE7780_H +#define __ASM_SH_SE7780_H + +/* + * linux/include/asm-sh/se7780.h + * + * Copyright (C) 2006,2007 Nobuhiro Iwamatsu + * + * Hitachi UL SolutionEngine 7780 Support. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <asm/addrspace.h> + +/* Box specific addresses. */ +#define SE_AREA0_WIDTH 4 /* Area0: 32bit */ +#define PA_ROM 0xa0000000 /* EPROM */ +#define PA_ROM_SIZE 0x00400000 /* EPROM size 4M byte */ +#define PA_FROM 0xa1000000 /* Flash-ROM */ +#define PA_FROM_SIZE 0x01000000 /* Flash-ROM size 16M byte */ +#define PA_EXT1 0xa4000000 +#define PA_EXT1_SIZE 0x04000000 +#define PA_SM501 PA_EXT1 /* Graphic IC (SM501) */ +#define PA_SM501_SIZE PA_EXT1_SIZE /* Graphic IC (SM501) */ +#define PA_SDRAM 0xa8000000 /* DDR-SDRAM(Area2/3) 128MB */ +#define PA_SDRAM_SIZE 0x08000000 + +#define PA_EXT4 0xb0000000 +#define PA_EXT4_SIZE 0x04000000 +#define PA_EXT_FLASH PA_EXT4 /* Expansion Flash-ROM */ + +#define PA_PERIPHERAL PA_AREA6_IO /* SW6-6=ON */ + +#define PA_LAN (PA_PERIPHERAL + 0) /* SMC LAN91C111 */ +#define PA_LED_DISP (PA_PERIPHERAL + 0x02000000) /* 8words LED Display */ +#define DISP_CHAR_RAM (7 << 3) +#define DISP_SEL0_ADDR (DISP_CHAR_RAM + 0) +#define DISP_SEL1_ADDR (DISP_CHAR_RAM + 1) +#define DISP_SEL2_ADDR (DISP_CHAR_RAM + 2) +#define DISP_SEL3_ADDR (DISP_CHAR_RAM + 3) +#define DISP_SEL4_ADDR (DISP_CHAR_RAM + 4) +#define DISP_SEL5_ADDR (DISP_CHAR_RAM + 5) +#define DISP_SEL6_ADDR (DISP_CHAR_RAM + 6) +#define DISP_SEL7_ADDR (DISP_CHAR_RAM + 7) + +#define DISP_UDC_RAM (5 << 3) +#define PA_FPGA (PA_PERIPHERAL + 0x03000000) /* FPGA base address */ + +/* FPGA register address and bit */ +#define FPGA_SFTRST (PA_FPGA + 0) /* Soft reset register */ +#define FPGA_INTMSK1 (PA_FPGA + 2) /* Interrupt Mask register 1 */ +#define FPGA_INTMSK2 (PA_FPGA + 4) /* Interrupt Mask register 2 */ +#define FPGA_INTSEL1 (PA_FPGA + 6) /* Interrupt select register 1 */ +#define FPGA_INTSEL2 (PA_FPGA + 8) /* Interrupt select register 2 */ +#define FPGA_INTSEL3 (PA_FPGA + 10) /* Interrupt select register 3 */ +#define FPGA_PCI_INTSEL1 (PA_FPGA + 12) /* PCI Interrupt select register 1 */ +#define FPGA_PCI_INTSEL2 (PA_FPGA + 14) /* PCI Interrupt select register 2 */ +#define FPGA_INTSET (PA_FPGA + 16) /* IRQ/IRL select register */ +#define FPGA_INTSTS1 (PA_FPGA + 18) /* Interrupt status register 1 */ +#define FPGA_INTSTS2 (PA_FPGA + 20) /* Interrupt status register 2 */ +#define FPGA_REQSEL (PA_FPGA + 22) /* REQ/GNT select register */ +#define FPGA_DBG_LED (PA_FPGA + 32) /* Debug LED(D-LED[8:1] */ +#define PA_LED FPGA_DBG_LED +#define FPGA_IVDRID (PA_FPGA + 36) /* iVDR ID Register */ +#define FPGA_IVDRPW (PA_FPGA + 38) /* iVDR Power ON Register */ +#define FPGA_MMCID (PA_FPGA + 40) /* MMC ID Register */ + +/* FPGA INTSEL position */ +/* INTSEL1 */ +#define IRQPOS_SMC91CX (0 * 4) +#define IRQPOS_SM501 (1 * 4) +/* INTSEL2 */ +#define IRQPOS_EXTINT1 (0 * 4) +#define IRQPOS_EXTINT2 (1 * 4) +#define IRQPOS_EXTINT3 (2 * 4) +#define IRQPOS_EXTINT4 (3 * 4) +/* INTSEL3 */ +#define IRQPOS_PCCPW (0 * 4) + +/* IDE interrupt */ +#define IRQ_IDE0 67 /* iVDR */ + +/* SMC interrupt */ +#define SMC_IRQ 8 + +/* SM501 interrupt */ +#define SM501_IRQ 0 + +/* interrupt pin */ +#define IRQPIN_EXTINT1 0 /* IRQ0 pin */ +#define IRQPIN_EXTINT2 1 /* IRQ1 pin */ +#define IRQPIN_EXTINT3 2 /* IRQ2 pin */ +#define IRQPIN_SMC91CX 3 /* IRQ3 pin */ +#define IRQPIN_EXTINT4 4 /* IRQ4 pin */ +#define IRQPIN_PCC0 5 /* IRQ5 pin */ +#define IRQPIN_PCC2 6 /* IRQ6 pin */ +#define IRQPIN_SM501 7 /* IRQ7 pin */ +#define IRQPIN_PCCPW 7 /* IRQ7 pin */ + +/* arch/sh/boards/se/7780/irq.c */ +void init_se7780_IRQ(void); + +#define __IO_PREFIX se7780 +#include <asm/io_generic.h> + +#endif /* __ASM_SH_SE7780_H */ diff --git a/arch/sh/include/mach-sh03/mach/io.h b/arch/sh/include/mach-sh03/mach/io.h new file mode 100644 index 000000000000..c39c785bba94 --- /dev/null +++ b/arch/sh/include/mach-sh03/mach/io.h @@ -0,0 +1,25 @@ +/* + * include/asm-sh/sh03/io.h + * + * Copyright 2004 Interface Co.,Ltd. Saito.K + * + * IO functions for an Interface CTP/PCI-SH03 + */ + +#ifndef _ASM_SH_IO_SH03_H +#define _ASM_SH_IO_SH03_H + +#include <linux/time.h> + +#define IRL0_IRQ 2 +#define IRL0_PRIORITY 13 +#define IRL1_IRQ 5 +#define IRL1_PRIORITY 10 +#define IRL2_IRQ 8 +#define IRL2_PRIORITY 7 +#define IRL3_IRQ 11 +#define IRL3_PRIORITY 4 + +void heartbeat_sh03(void); + +#endif /* _ASM_SH_IO_SH03_H */ diff --git a/arch/sh/include/mach-sh03/mach/sh03.h b/arch/sh/include/mach-sh03/mach/sh03.h new file mode 100644 index 000000000000..19c40b80428d --- /dev/null +++ b/arch/sh/include/mach-sh03/mach/sh03.h @@ -0,0 +1,18 @@ +#ifndef __ASM_SH_SH03_H +#define __ASM_SH_SH03_H + +/* + * linux/include/asm-sh/sh03/sh03.h + * + * Copyright (C) 2004 Interface Co., Ltd. Saito.K + * + * Interface CTP/PCI-SH03 support + */ + +#define PA_PCI_IO (0xbe240000) /* PCI I/O space */ +#define PA_PCI_MEM (0xbd000000) /* PCI MEM space */ + +#define PCIPAR (0xa4000cf8) /* PCI Config address */ +#define PCIPDR (0xa4000cfc) /* PCI Config data */ + +#endif /* __ASM_SH_SH03_H */ diff --git a/arch/sh/kernel/.gitignore b/arch/sh/kernel/.gitignore new file mode 100644 index 000000000000..c5f676c3c224 --- /dev/null +++ b/arch/sh/kernel/.gitignore @@ -0,0 +1 @@ +vmlinux.lds diff --git a/arch/sh/kernel/Makefile_32 b/arch/sh/kernel/Makefile_32 index 4bbdce36b92b..0e6905fe9fec 100644 --- a/arch/sh/kernel/Makefile_32 +++ b/arch/sh/kernel/Makefile_32 @@ -21,7 +21,7 @@ obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o obj-$(CONFIG_CRASH_DUMP) += crash_dump.o obj-$(CONFIG_PM) += pm.o obj-$(CONFIG_STACKTRACE) += stacktrace.o -obj-$(CONFIG_BINFMT_ELF) += dump_task.o +obj-$(CONFIG_ELF_CORE) += dump_task.o obj-$(CONFIG_IO_TRAPPED) += io_trapped.o EXTRA_CFLAGS += -Werror diff --git a/arch/sh/kernel/cf-enabler.c b/arch/sh/kernel/cf-enabler.c index 01ff4d05aab0..bea40339919b 100644 --- a/arch/sh/kernel/cf-enabler.c +++ b/arch/sh/kernel/cf-enabler.c @@ -80,11 +80,11 @@ static int __init cf_init_default(void) } #if defined(CONFIG_SH_SOLUTION_ENGINE) -#include <asm/se.h> +#include <mach-se/mach/se.h> #elif defined(CONFIG_SH_7722_SOLUTION_ENGINE) -#include <asm/se7722.h> +#include <mach-se/mach/se7722.h> #elif defined(CONFIG_SH_7721_SOLUTION_ENGINE) -#include <asm/se7721.h> +#include <mach-se/mach/se7721.h> #endif /* @@ -157,7 +157,7 @@ static int __init cf_init_se(void) } #endif -int __init cf_init(void) +static int __init cf_init(void) { if (mach_is_se() || mach_is_7722se() || mach_is_7721se()) return cf_init_se(); diff --git a/arch/sh/kernel/cpu/clock.c b/arch/sh/kernel/cpu/clock.c index b5f1e23ed57c..f5eb56e6bc59 100644 --- a/arch/sh/kernel/cpu/clock.c +++ b/arch/sh/kernel/cpu/clock.c @@ -88,7 +88,7 @@ static void propagate_rate(struct clk *clk) } } -int __clk_enable(struct clk *clk) +static int __clk_enable(struct clk *clk) { /* * See if this is the first time we're enabling the clock, some @@ -111,7 +111,6 @@ int __clk_enable(struct clk *clk) return 0; } -EXPORT_SYMBOL_GPL(__clk_enable); int clk_enable(struct clk *clk) { @@ -131,7 +130,7 @@ static void clk_kref_release(struct kref *kref) /* Nothing to do */ } -void __clk_disable(struct clk *clk) +static void __clk_disable(struct clk *clk) { int count = kref_put(&clk->kref, clk_kref_release); @@ -143,7 +142,6 @@ void __clk_disable(struct clk *clk) clk->ops->disable(clk); } } -EXPORT_SYMBOL_GPL(__clk_disable); void clk_disable(struct clk *clk) { @@ -310,15 +308,11 @@ static int show_clocks(char *buf, char **start, off_t off, list_for_each_entry_reverse(clk, &clock_list, node) { unsigned long rate = clk_get_rate(clk); - /* - * Don't bother listing dummy clocks with no ancestry - * that only support enable and disable ops. - */ - if (unlikely(!rate && !clk->parent)) - continue; - - p += sprintf(p, "%-12s\t: %ld.%02ldMHz\n", clk->name, - rate / 1000000, (rate % 1000000) / 10000); + p += sprintf(p, "%-12s\t: %ld.%02ldMHz\t%s\n", clk->name, + rate / 1000000, (rate % 1000000) / 10000, + ((clk->flags & CLK_ALWAYS_ENABLED) || + (atomic_read(&clk->kref.refcount) != 1)) ? + "enabled" : "disabled"); } return p - buf; diff --git a/arch/sh/kernel/cpu/irq/intc-sh5.c b/arch/sh/kernel/cpu/irq/intc-sh5.c index 79baa47af977..726f0335da76 100644 --- a/arch/sh/kernel/cpu/irq/intc-sh5.c +++ b/arch/sh/kernel/cpu/irq/intc-sh5.c @@ -20,7 +20,7 @@ #include <linux/io.h> #include <linux/kernel.h> #include <linux/bitops.h> -#include <asm/cpu/irq.h> +#include <cpu/irq.h> #include <asm/page.h> /* diff --git a/arch/sh/kernel/cpu/irq/intc.c b/arch/sh/kernel/cpu/irq/intc.c index da5dae787888..8c70e201bde0 100644 --- a/arch/sh/kernel/cpu/irq/intc.c +++ b/arch/sh/kernel/cpu/irq/intc.c @@ -62,7 +62,7 @@ struct intc_desc_int { #endif static unsigned int intc_prio_level[NR_IRQS]; /* for now */ -#ifdef CONFIG_CPU_SH3 +#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4A) static unsigned long ack_handle[NR_IRQS]; #endif @@ -231,7 +231,7 @@ static void intc_disable(unsigned int irq) } } -#ifdef CONFIG_CPU_SH3 +#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4A) static void intc_mask_ack(unsigned int irq) { struct intc_desc_int *d = get_intc_desc(irq); @@ -244,8 +244,23 @@ static void intc_mask_ack(unsigned int irq) if (handle) { addr = INTC_REG(d, _INTC_ADDR_D(handle), 0); - ctrl_inb(addr); - ctrl_outb(0x3f ^ set_field(0, 1, handle), addr); + switch (_INTC_FN(handle)) { + case REG_FN_MODIFY_BASE + 0: /* 8bit */ + ctrl_inb(addr); + ctrl_outb(0xff ^ set_field(0, 1, handle), addr); + break; + case REG_FN_MODIFY_BASE + 1: /* 16bit */ + ctrl_inw(addr); + ctrl_outw(0xffff ^ set_field(0, 1, handle), addr); + break; + case REG_FN_MODIFY_BASE + 3: /* 32bit */ + ctrl_inl(addr); + ctrl_outl(0xffffffff ^ set_field(0, 1, handle), addr); + break; + default: + BUG(); + break; + } } } #endif @@ -466,7 +481,7 @@ static unsigned int __init intc_prio_data(struct intc_desc *desc, return 0; } -#ifdef CONFIG_CPU_SH3 +#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4A) static unsigned int __init intc_ack_data(struct intc_desc *desc, struct intc_desc_int *d, intc_enum enum_id) @@ -601,7 +616,7 @@ static void __init intc_register_irq(struct intc_desc *desc, /* irq should be disabled by default */ d->chip.mask(irq); -#ifdef CONFIG_CPU_SH3 +#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4A) if (desc->ack_regs) ack_handle[irq] = intc_ack_data(desc, d, enum_id); #endif @@ -635,7 +650,7 @@ void __init register_intc_controller(struct intc_desc *desc) d->nr_reg += desc->prio_regs ? desc->nr_prio_regs * 2 : 0; d->nr_reg += desc->sense_regs ? desc->nr_sense_regs : 0; -#ifdef CONFIG_CPU_SH3 +#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4A) d->nr_reg += desc->ack_regs ? desc->nr_ack_regs : 0; #endif d->reg = alloc_bootmem(d->nr_reg * sizeof(*d->reg)); @@ -676,7 +691,7 @@ void __init register_intc_controller(struct intc_desc *desc) d->chip.mask_ack = intc_disable; d->chip.set_type = intc_set_sense; -#ifdef CONFIG_CPU_SH3 +#if defined(CONFIG_CPU_SH3) || defined(CONFIG_CPU_SH4A) if (desc->ack_regs) { for (i = 0; i < desc->nr_ack_regs; i++) k += save_reg(d, k, desc->ack_regs[i].set_reg, 0); diff --git a/arch/sh/kernel/cpu/sh2/entry.S b/arch/sh/kernel/cpu/sh2/entry.S index 0fc89069d8c7..becc54c45692 100644 --- a/arch/sh/kernel/cpu/sh2/entry.S +++ b/arch/sh/kernel/cpu/sh2/entry.S @@ -3,7 +3,7 @@ * * The SH-2 exception entry * - * Copyright (C) 2005,2006 Yoshinori Sato + * Copyright (C) 2005-2008 Yoshinori Sato * Copyright (C) 2005 AXE,Inc. * * This file is subject to the terms and conditions of the GNU General Public @@ -14,7 +14,7 @@ #include <linux/linkage.h> #include <asm/asm-offsets.h> #include <asm/thread_info.h> -#include <asm/cpu/mmu_context.h> +#include <cpu/mmu_context.h> #include <asm/unistd.h> #include <asm/errno.h> #include <asm/page.h> @@ -36,43 +36,41 @@ OFF_TRA = (16*4+6*4) #include <asm/entry-macros.S> ENTRY(exception_handler) - ! already saved r0/r1 + ! stack + ! r0 <- point sp + ! r1 + ! pc + ! sr + ! r0 = temporary + ! r1 = vector (pseudo EXPEVT / INTEVT / TRA) mov.l r2,@-sp mov.l r3,@-sp - mov r0,r1 cli mov.l $cpu_mode,r2 mov.l @r2,r0 mov.l @(5*4,r15),r3 ! previous SR - shll2 r3 ! set "S" flag - rotl r0 ! T <- "S" flag - rotl r0 ! "S" flag is LSB - rotcr r3 ! T -> r3:b30 - shlr r3 - shlr r0 - bt/s 1f - mov.l r3,@(5*4,r15) ! copy cpu mode to SR + or r0,r3 ! set MD + tst r0,r0 + bf/s 1f ! previous mode check + mov.l r3,@(5*4,r15) ! update SR ! switch to kernel mode - mov #1,r0 - rotr r0 - rotr r0 + mov.l __md_bit,r0 mov.l r0,@r2 ! enter kernel mode mov.l $current_thread_info,r2 mov.l @r2,r2 - mov #0x20,r0 + mov #(THREAD_SIZE >> 8),r0 shll8 r0 add r2,r0 mov r15,r2 ! r2 = user stack top mov r0,r15 ! switch kernel stack - add #-4,r15 ! dummy mov.l r1,@-r15 ! TRA sts.l macl, @-r15 sts.l mach, @-r15 stc.l gbr, @-r15 - mov.l @(4*4,r2),r0 - mov.l @(5*4,r2),r1 - mov.l r1,@-r15 ! original SR + mov.l @(5*4,r2),r0 + mov.l r0,@-r15 ! original SR sts.l pr,@-r15 + mov.l @(4*4,r2),r0 mov.l r0,@-r15 ! original PC mov r2,r3 add #(4+2)*4,r3 ! rewind r0 - r3 + exception frame @@ -88,14 +86,15 @@ ENTRY(exception_handler) mov.l r6,@-r15 mov.l r5,@-r15 mov.l r4,@-r15 + mov r1,r9 ! save TRA mov r2,r8 ! copy user -> kernel stack - mov.l @r8+,r3 + mov.l @(0,r8),r3 mov.l r3,@-r15 - mov.l @r8+,r2 + mov.l @(4,r8),r2 mov.l r2,@-r15 - mov.l @r8+,r1 + mov.l @(12,r8),r1 mov.l r1,@-r15 - mov.l @r8+,r0 + mov.l @(8,r8),r0 bra 2f mov.l r0,@-r15 1: @@ -107,10 +106,11 @@ ENTRY(exception_handler) mov.l r0,@-r15 mov.l @r2+,r0 ! old R2 mov.l r0,@-r15 - mov.l @r2+,r0 ! old R1 - mov.l r0,@-r15 - mov.l @r2+,r0 ! old R0 + mov.l @(4,r2),r0 ! old R1 mov.l r0,@-r15 + mov.l @r2,r0 ! old R0 + mov.l r0,@-r15 + add #8,r2 mov.l @r2+,r3 ! old PC mov.l @r2+,r0 ! old SR add #-4,r2 ! exception frame stub (sr) @@ -135,14 +135,12 @@ ENTRY(exception_handler) mov.l r6,@-r2 mov.l r5,@-r2 mov.l r4,@-r2 + mov r1,r9 mov.l @(OFF_R0,r15),r0 mov.l @(OFF_R1,r15),r1 mov.l @(OFF_R2,r15),r2 mov.l @(OFF_R3,r15),r3 2: - mov #OFF_TRA,r8 - add r15,r8 - mov.l @r8,r9 mov #64,r8 cmp/hs r8,r9 bt interrupt_entry ! vec >= 64 is interrupt @@ -150,26 +148,14 @@ ENTRY(exception_handler) cmp/hs r8,r9 bt trap_entry ! 64 > vec >= 32 is trap -#if defined(CONFIG_SH_FPU) - mov #13,r8 - cmp/eq r8,r9 - bt 10f ! fpu - nop -#endif - mov.l 4f,r8 mov r9,r4 shll2 r9 add r9,r8 - mov.l @r8,r8 - mov #0,r9 - cmp/eq r9,r8 + mov.l @r8,r8 ! exception handler address + tst r8,r8 bf 3f mov.l 8f,r8 ! unhandled exception -#if defined(CONFIG_SH_FPU) -10: - mov.l 9f, r8 ! unhandled exception -#endif 3: mov.l 5f,r10 jmp @r8 @@ -188,10 +174,7 @@ interrupt_entry: 5: .long ret_from_exception 6: .long ret_from_irq 7: .long do_IRQ -8: .long do_exception_error -#ifdef CONFIG_SH_FPU -9: .long fpu_error_trap_handler -#endif +8: .long exception_error trap_entry: mov #0x30,r8 @@ -200,24 +183,9 @@ trap_entry: add #-0x10,r9 ! convert SH2 to SH3/4 ABI 1: shll2 r9 ! TRA - mov #OFF_TRA,r8 - add r15,r8 - mov.l r9,@r8 - mov r9,r8 -#ifdef CONFIG_TRACE_IRQFLAGS - mov.l 2f, r9 - jsr @r9 - nop -#endif - sti - bra system_call - nop + bra system_call ! jump common systemcall entry + mov r9,r8 - .align 2 -#ifdef CONFIG_TRACE_IRQFLAGS -2: .long trace_hardirqs_on -#endif - #if defined(CONFIG_SH_STANDARD_BIOS) /* Unwind the stack and jmp to the debug entry */ ENTRY(sh_bios_handler) @@ -240,7 +208,7 @@ ENTRY(sh_bios_handler) mov.l @r2,r2 stc sr,r3 mov.l r2,@r0 - mov.l r3,@r0 + mov.l r3,@(4,r0) mov.l r1,@(8,r0) mov.l @r15+, r0 mov.l @r15+, r1 @@ -272,22 +240,30 @@ ENTRY(address_error_trap_handler) mov.l 1f,r0 jmp @r0 mov #0,r5 ! writeaccess is unknown - .align 2 + .align 2 1: .long do_address_error restore_all: - cli -#ifdef CONFIG_TRACE_IRQFLAGS - mov.l 1f, r0 - jsr @r0 - nop -#endif + stc sr,r0 + or #0xf0,r0 + ldc r0,sr ! all interrupt block (same BL = 1) + ! restore special register + ! overlap exception frame + mov r15,r0 + add #17*4,r0 + lds.l @r0+,pr + add #4,r0 + ldc.l @r0+,gbr + lds.l @r0+,mach + lds.l @r0+,macl mov r15,r0 mov.l $cpu_mode,r2 mov #OFF_SR,r3 mov.l @(r0,r3),r1 - mov.l r1,@r2 + mov.l __md_bit,r3 + and r1,r3 ! copy MD bit + mov.l r3,@r2 shll2 r1 ! clear MD bit shlr2 r1 mov.l @(OFF_SP,r0),r2 @@ -297,12 +273,6 @@ restore_all: mov #OFF_PC,r3 mov.l @(r0,r3),r1 mov.l r1,@r2 ! set pc - add #4*16+4,r0 - lds.l @r0+,pr - add #4,r0 ! skip sr - ldc.l @r0+,gbr - lds.l @r0+,mach - lds.l @r0+,macl get_current_thread_info r0, r1 mov.l $current_thread_info,r1 mov.l r0,@r1 @@ -326,9 +296,8 @@ restore_all: nop .align 2 -#ifdef CONFIG_TRACE_IRQFLAGS -1: .long trace_hardirqs_off -#endif +__md_bit: + .long 0x40000000 $current_thread_info: .long __current_thread_info $cpu_mode: diff --git a/arch/sh/kernel/cpu/sh2/ex.S b/arch/sh/kernel/cpu/sh2/ex.S index 6d285af7846c..85b0bf81fc1d 100644 --- a/arch/sh/kernel/cpu/sh2/ex.S +++ b/arch/sh/kernel/cpu/sh2/ex.S @@ -18,16 +18,17 @@ exception_entry: no = 0 .rept 256 - mov.l r0,@-sp - mov #no,r0 + mov.l r1,@-sp bra exception_trampoline - and #0xff,r0 + mov #no,r1 no = no + 1 .endr exception_trampoline: - mov.l r1,@-sp - mov.l $exception_handler,r1 - jmp @r1 + mov.l r0,@-sp + mov.l $exception_handler,r0 + extu.b r1,r1 + jmp @r0 + extu.w r1,r1 .align 2 $exception_entry: @@ -41,6 +42,6 @@ $exception_handler: ENTRY(vbr_base) vector = 0 .rept 256 - .long exception_entry + vector * 8 + .long exception_entry + vector * 6 vector = vector + 1 .endr diff --git a/arch/sh/kernel/cpu/sh2/setup-sh7619.c b/arch/sh/kernel/cpu/sh2/setup-sh7619.c index cc530f4d84d6..56e5878e5516 100644 --- a/arch/sh/kernel/cpu/sh2/setup-sh7619.c +++ b/arch/sh/kernel/cpu/sh2/setup-sh7619.c @@ -96,8 +96,32 @@ static struct platform_device sci_device = { }, }; +static struct resource eth_resources[] = { + [0] = { + .start = 0xfb000000, + .end = 0xfb0001c8, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 85, + .end = 85, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device eth_device = { + .name = "sh-eth", + .id = -1, + .dev = { + .platform_data = (void *)1, + }, + .num_resources = ARRAY_SIZE(eth_resources), + .resource = eth_resources, +}; + static struct platform_device *sh7619_devices[] __initdata = { &sci_device, + ð_device, }; static int __init sh7619_devices_setup(void) diff --git a/arch/sh/kernel/cpu/sh2a/Makefile b/arch/sh/kernel/cpu/sh2a/Makefile index 7e2b90cfa7bf..1ab1ecf4c768 100644 --- a/arch/sh/kernel/cpu/sh2a/Makefile +++ b/arch/sh/kernel/cpu/sh2a/Makefile @@ -4,7 +4,7 @@ obj-y := common.o probe.o opcode_helper.o -common-y += $(addprefix ../sh2/, ex.o entry.o) +common-y += ex.o entry.o obj-$(CONFIG_SH_FPU) += fpu.o diff --git a/arch/sh/kernel/cpu/sh2a/entry.S b/arch/sh/kernel/cpu/sh2a/entry.S new file mode 100644 index 000000000000..ab3903eeda5c --- /dev/null +++ b/arch/sh/kernel/cpu/sh2a/entry.S @@ -0,0 +1,249 @@ +/* + * arch/sh/kernel/cpu/sh2a/entry.S + * + * The SH-2A exception entry + * + * Copyright (C) 2008 Yoshinori Sato + * Based on arch/sh/kernel/cpu/sh2/entry.S + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include <linux/linkage.h> +#include <asm/asm-offsets.h> +#include <asm/thread_info.h> +#include <cpu/mmu_context.h> +#include <asm/unistd.h> +#include <asm/errno.h> +#include <asm/page.h> + +/* Offsets to the stack */ +OFF_R0 = 0 /* Return value. New ABI also arg4 */ +OFF_R1 = 4 /* New ABI: arg5 */ +OFF_R2 = 8 /* New ABI: arg6 */ +OFF_R3 = 12 /* New ABI: syscall_nr */ +OFF_R4 = 16 /* New ABI: arg0 */ +OFF_R5 = 20 /* New ABI: arg1 */ +OFF_R6 = 24 /* New ABI: arg2 */ +OFF_R7 = 28 /* New ABI: arg3 */ +OFF_SP = (15*4) +OFF_PC = (16*4) +OFF_SR = (16*4+2*4) +OFF_TRA = (16*4+6*4) + +#include <asm/entry-macros.S> + +ENTRY(exception_handler) + ! stack + ! r0 <- point sp + ! r1 + ! pc + ! sr + ! r0 = temporary + ! r1 = vector (pseudo EXPEVT / INTEVT / TRA) + mov.l r2,@-sp + cli + mov.l $cpu_mode,r2 + bld.b #6,@(0,r2) !previus SR.MD + bst.b #6,@(4*4,r15) !set cpu mode to SR.MD + bt 1f + ! switch to kernel mode + bset.b #6,@(0,r2) !set SR.MD + mov.l $current_thread_info,r2 + mov.l @r2,r2 + mov #(THREAD_SIZE >> 8),r0 + shll8 r0 + add r2,r0 ! r0 = kernel stack tail + mov r15,r2 ! r2 = user stack top + mov r0,r15 ! switch kernel stack + mov.l r1,@-r15 ! TRA + sts.l macl, @-r15 + sts.l mach, @-r15 + stc.l gbr, @-r15 + mov.l @(4*4,r2),r0 + mov.l r0,@-r15 ! original SR + sts.l pr,@-r15 + mov.l @(3*4,r2),r0 + mov.l r0,@-r15 ! original PC + mov r2,r0 + add #(3+2)*4,r0 ! rewind r0 - r3 + exception frame + lds r0,pr ! pr = original SP + movmu.l r3,@-r15 ! save regs + mov r2,r8 ! r8 = previus stack top + mov r1,r9 ! r9 = interrupt vector + ! restore previous stack + mov.l @r8+,r2 + mov.l @r8+,r0 + mov.l @r8+,r1 + bra 2f + movml.l r2,@-r15 +1: + ! in kernel exception + mov r15,r2 + add #-((OFF_TRA + 4) - OFF_PC) + 5*4,r15 + movmu.l r3,@-r15 + mov r2,r8 ! r8 = previous stack top + mov r1,r9 ! r9 = interrupt vector + ! restore exception frame & regs + mov.l @r8+,r2 ! old R2 + mov.l @r8+,r0 ! old R0 + mov.l @r8+,r1 ! old R1 + mov.l @r8+,r10 ! old PC + mov.l @r8+,r11 ! old SR + movml.l r2,@-r15 + mov.l r10,@(OFF_PC,r15) + mov.l r11,@(OFF_SR,r15) + mov.l r8,@(OFF_SP,r15) ! save old sp + mov r15,r8 + add #OFF_TRA + 4,r8 + mov.l r9,@-r8 + sts.l macl,@-r8 + sts.l mach,@-r8 + stc.l gbr,@-r8 + add #-4,r8 + sts.l pr,@-r8 +2: + ! dispatch exception / interrupt + mov #64,r8 + cmp/hs r8,r9 + bt interrupt_entry ! vec >= 64 is interrupt + mov #32,r8 + cmp/hs r8,r9 + bt trap_entry ! 64 > vec >= 32 is trap + + mov.l 4f,r8 + mov r9,r4 + shll2 r9 + add r9,r8 + mov.l @r8,r8 ! exception handler address + tst r8,r8 + bf 3f + mov.l 8f,r8 ! unhandled exception +3: + mov.l 5f,r10 + jmp @r8 + lds r10,pr + +interrupt_entry: + mov r9,r4 + mov r15,r5 + mov.l 7f,r8 + mov.l 6f,r9 + jmp @r8 + lds r9,pr + + .align 2 +4: .long exception_handling_table +5: .long ret_from_exception +6: .long ret_from_irq +7: .long do_IRQ +8: .long exception_error + +trap_entry: + mov #0x30,r8 + cmp/ge r8,r9 ! vector 0x20-0x2f is systemcall + bt 1f + add #-0x10,r9 ! convert SH2 to SH3/4 ABI +1: + shll2 r9 ! TRA + bra system_call ! jump common systemcall entry + mov r9,r8 + +#if defined(CONFIG_SH_STANDARD_BIOS) + /* Unwind the stack and jmp to the debug entry */ +ENTRY(sh_bios_handler) + mov r15,r0 + add #(22-4)*4-4,r0 + ldc.l @r0+,gbr + lds.l @r0+,mach + lds.l @r0+,macl + mov r15,r0 + mov.l @(OFF_SP,r0),r1 + mov.l @(OFF_SR,r2),r3 + mov.l r3,@-r1 + mov.l @(OFF_SP,r2),r3 + mov.l r3,@-r1 + mov r15,r0 + add #(22-4)*4-8,r0 + mov.l 1f,r2 + mov.l @r2,r2 + stc sr,r3 + mov.l r2,@r0 + mov.l r3,@(4,r0) + mov.l r1,@(8,r0) + movml.l @r15+,r14 + add #8,r15 + lds.l @r15+, pr + rte + mov.l @r15+,r15 + .align 2 +1: .long gdb_vbr_vector +#endif /* CONFIG_SH_STANDARD_BIOS */ + +ENTRY(address_error_trap_handler) + mov r15,r4 ! regs + mov.l @(OFF_PC,r15),r6 ! pc + mov.l 1f,r0 + jmp @r0 + mov #0,r5 ! writeaccess is unknown + + .align 2 +1: .long do_address_error + +restore_all: + stc sr,r0 + or #0xf0,r0 + ldc r0,sr ! all interrupt block (same BL = 1) + ! restore special register + ! overlap exception frame + mov r15,r0 + add #17*4,r0 + lds.l @r0+,pr + add #4,r0 + ldc.l @r0+,gbr + lds.l @r0+,mach + lds.l @r0+,macl + mov r15,r0 + mov.l $cpu_mode,r2 + bld.b #6,@(OFF_SR,r15) + bst.b #6,@(0,r2) ! save CPU mode + mov.l @(OFF_SR,r0),r1 + shll2 r1 + shlr2 r1 ! clear MD bit + mov.l @(OFF_SP,r0),r2 + add #-8,r2 + mov.l r2,@(OFF_SP,r0) ! point exception frame top + mov.l r1,@(4,r2) ! set sr + mov.l @(OFF_PC,r0),r1 + mov.l r1,@r2 ! set pc + get_current_thread_info r0, r1 + mov.l $current_thread_info,r1 + mov.l r0,@r1 + movml.l @r15+,r14 + mov.l @r15,r15 + rte + nop + + .align 2 +$current_thread_info: + .long __current_thread_info +$cpu_mode: + .long __cpu_mode + +! common exception handler +#include "../../entry-common.S" + + .data +! cpu operation mode +! bit30 = MD (compatible SH3/4) +__cpu_mode: + .long 0x40000000 + + .section .bss +__current_thread_info: + .long 0 + +ENTRY(exception_handling_table) + .space 4*32 diff --git a/arch/sh/kernel/cpu/sh2a/ex.S b/arch/sh/kernel/cpu/sh2a/ex.S new file mode 100644 index 000000000000..3ead9e63965a --- /dev/null +++ b/arch/sh/kernel/cpu/sh2a/ex.S @@ -0,0 +1,72 @@ +/* + * arch/sh/kernel/cpu/sh2a/ex.S + * + * The SH-2A exception vector table + * + * Copyright (C) 2008 Yoshinori Sato + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include <linux/linkage.h> + +! +! convert Exception Vector to Exception Number +! + +! exception no 0 to 255 +exception_entry0: +no = 0 + .rept 256 + mov.l r1,@-sp + bra exception_trampoline0 + mov #no,r1 +no = no + 1 + .endr +exception_trampoline0: + mov.l r0,@-sp + mov.l 1f,r0 + extu.b r1,r1 + jmp @r0 + extu.w r1,r1 + + .align 2 +1: .long exception_handler + +! exception no 256 to 511 +exception_entry1: +no = 0 + .rept 256 + mov.l r1,@-sp + bra exception_trampoline1 + mov #no,r1 +no = no + 1 + .endr +exception_trampoline1: + mov.l r0,@-sp + extu.b r1,r1 + movi20 #0x100,r0 + add r0,r1 + mov.l 1f,r0 + jmp @r0 + extu.w r1,r1 + + .align 2 +1: .long exception_handler + + ! +! Exception Vector Base +! + .align 2 +ENTRY(vbr_base) +vector = 0 + .rept 256 + .long exception_entry0 + vector * 6 +vector = vector + 1 + .endr + .rept 256 + .long exception_entry1 + vector * 6 +vector = vector + 1 + .endr diff --git a/arch/sh/kernel/cpu/sh3/entry.S b/arch/sh/kernel/cpu/sh3/entry.S index 4004073f98cd..3fe482dd05c1 100644 --- a/arch/sh/kernel/cpu/sh3/entry.S +++ b/arch/sh/kernel/cpu/sh3/entry.S @@ -14,7 +14,7 @@ #include <asm/asm-offsets.h> #include <asm/thread_info.h> #include <asm/unistd.h> -#include <asm/cpu/mmu_context.h> +#include <cpu/mmu_context.h> #include <asm/page.h> ! NOTE: diff --git a/arch/sh/kernel/cpu/sh3/ex.S b/arch/sh/kernel/cpu/sh3/ex.S index 11b6d9c6edae..dac429726899 100644 --- a/arch/sh/kernel/cpu/sh3/ex.S +++ b/arch/sh/kernel/cpu/sh3/ex.S @@ -4,7 +4,7 @@ * The SH-3 and SH-4 exception vector table. * Copyright (C) 1999, 2000, 2002 Niibe Yutaka - * Copyright (C) 2003 - 2006 Paul Mundt + * Copyright (C) 2003 - 2008 Paul Mundt * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive @@ -12,13 +12,30 @@ */ #include <linux/linkage.h> +#if !defined(CONFIG_MMU) +#define tlb_miss_load exception_error +#define tlb_miss_store exception_error +#define initial_page_write exception_error +#define tlb_protection_violation_load exception_error +#define tlb_protection_violation_store exception_error +#define address_error_load exception_error +#define address_error_store exception_error +#endif + +#if !defined(CONFIG_SH_FPU) +#define fpu_error_trap_handler exception_error +#endif + +#if !defined(CONFIG_KGDB_NMI) +#define kgdb_handle_exception exception_error +#endif + .align 2 .data ENTRY(exception_handling_table) .long exception_error /* 000 */ .long exception_error -#if defined(CONFIG_MMU) .long tlb_miss_load /* 040 */ .long tlb_miss_store .long initial_page_write @@ -26,30 +43,13 @@ ENTRY(exception_handling_table) .long tlb_protection_violation_store .long address_error_load .long address_error_store /* 100 */ -#else - .long exception_error ! tlb miss load /* 040 */ - .long exception_error ! tlb miss store - .long exception_error ! initial page write - .long exception_error ! tlb prot violation load - .long exception_error ! tlb prot violation store - .long exception_error ! address error load - .long exception_error ! address error store /* 100 */ -#endif -#if defined(CONFIG_SH_FPU) .long fpu_error_trap_handler /* 120 */ -#else - .long exception_error /* 120 */ -#endif .long exception_error /* 140 */ .long system_call ! Unconditional Trap /* 160 */ .long exception_error ! reserved_instruction (filled by trap_init) /* 180 */ .long exception_error ! illegal_slot_instruction (filled by trap_init) /*1A0*/ ENTRY(nmi_slot) -#if defined (CONFIG_KGDB_NMI) .long kgdb_handle_exception /* 1C0 */ ! Allow trap to debugger -#else - .long exception_none /* 1C0 */ ! Not implemented yet -#endif ENTRY(user_break_point_trap) .long break_point_trap /* 1E0 */ diff --git a/arch/sh/kernel/cpu/sh4/fpu.c b/arch/sh/kernel/cpu/sh4/fpu.c index 8020796139f1..2d452f67fb87 100644 --- a/arch/sh/kernel/cpu/sh4/fpu.c +++ b/arch/sh/kernel/cpu/sh4/fpu.c @@ -13,7 +13,7 @@ #include <linux/sched.h> #include <linux/signal.h> #include <linux/io.h> -#include <asm/cpu/fpu.h> +#include <cpu/fpu.h> #include <asm/processor.h> #include <asm/system.h> #include <asm/fpu.h> diff --git a/arch/sh/kernel/cpu/sh4/probe.c b/arch/sh/kernel/cpu/sh4/probe.c index be4926969181..2e42572b1b11 100644 --- a/arch/sh/kernel/cpu/sh4/probe.c +++ b/arch/sh/kernel/cpu/sh4/probe.c @@ -50,14 +50,18 @@ int __init detect_cpu_and_cache_system(void) boot_cpu_data.dcache.ways = 1; boot_cpu_data.dcache.linesz = L1_CACHE_BYTES; + /* We don't know the chip cut */ + boot_cpu_data.cut_major = boot_cpu_data.cut_minor = -1; + /* * Setup some generic flags we can probe on SH-4A parts */ - if (((pvr >> 24) & 0xff) == 0x10) { + if (((pvr >> 16) & 0xff) == 0x10) { if ((cvr & 0x10000000) == 0) boot_cpu_data.flags |= CPU_HAS_DSP; boot_cpu_data.flags |= CPU_HAS_LLSC; + boot_cpu_data.cut_major = pvr & 0x7f; } /* FPU detection works for everyone */ diff --git a/arch/sh/kernel/cpu/sh4/softfloat.c b/arch/sh/kernel/cpu/sh4/softfloat.c index 7b2d337ee412..828cb57cb959 100644 --- a/arch/sh/kernel/cpu/sh4/softfloat.c +++ b/arch/sh/kernel/cpu/sh4/softfloat.c @@ -36,7 +36,7 @@ * and Kamel Khelifi <kamel.khelifi@st.com> */ #include <linux/kernel.h> -#include <asm/cpu/fpu.h> +#include <cpu/fpu.h> #define LIT64( a ) a##LL diff --git a/arch/sh/kernel/cpu/sh4/sq.c b/arch/sh/kernel/cpu/sh4/sq.c index 9561b02ade0e..8a8a993f55ea 100644 --- a/arch/sh/kernel/cpu/sh4/sq.c +++ b/arch/sh/kernel/cpu/sh4/sq.c @@ -22,7 +22,7 @@ #include <linux/io.h> #include <asm/page.h> #include <asm/cacheflush.h> -#include <asm/cpu/sq.h> +#include <cpu/sq.h> struct sq_mapping; @@ -199,7 +199,7 @@ EXPORT_SYMBOL(sq_remap); /** * sq_unmap - Unmap a Store Queue allocation - * @map: Pre-allocated Store Queue mapping. + * @vaddr: Pre-allocated Store Queue mapping. * * Unmaps the store queue allocation @map that was previously created by * sq_remap(). Also frees up the pte that was previously inserted into diff --git a/arch/sh/kernel/cpu/sh4a/Makefile b/arch/sh/kernel/cpu/sh4a/Makefile index a880e7968750..9381ad8da263 100644 --- a/arch/sh/kernel/cpu/sh4a/Makefile +++ b/arch/sh/kernel/cpu/sh4a/Makefile @@ -21,7 +21,7 @@ clock-$(CONFIG_CPU_SUBTYPE_SH7763) := clock-sh7763.o clock-$(CONFIG_CPU_SUBTYPE_SH7770) := clock-sh7770.o clock-$(CONFIG_CPU_SUBTYPE_SH7780) := clock-sh7780.o clock-$(CONFIG_CPU_SUBTYPE_SH7785) := clock-sh7785.o -clock-$(CONFIG_CPU_SUBTYPE_SH7343) := clock-sh7343.o +clock-$(CONFIG_CPU_SUBTYPE_SH7343) := clock-sh7722.o clock-$(CONFIG_CPU_SUBTYPE_SH7722) := clock-sh7722.o clock-$(CONFIG_CPU_SUBTYPE_SH7723) := clock-sh7722.o clock-$(CONFIG_CPU_SUBTYPE_SH7366) := clock-sh7722.o diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7343.c b/arch/sh/kernel/cpu/sh4a/clock-sh7343.c deleted file mode 100644 index 7adc4f16e95a..000000000000 --- a/arch/sh/kernel/cpu/sh4a/clock-sh7343.c +++ /dev/null @@ -1,99 +0,0 @@ -/* - * arch/sh/kernel/cpu/sh4a/clock-sh7343.c - * - * SH7343/SH7722 support for the clock framework - * - * Copyright (C) 2006 Paul Mundt - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/io.h> -#include <asm/clock.h> -#include <asm/freq.h> - -/* - * SH7343/SH7722 uses a common set of multipliers and divisors, so this - * is quite simple.. - */ -static int multipliers[] = { 1, 2, 1, 2, 1, 1, 1, 1, 1, 1, 1, 1, 1 }; -static int divisors[] = { 1, 3, 2, 5, 3, 4, 5, 6, 8, 10, 12, 16, 20 }; - -#define pll_calc() (((ctrl_inl(FRQCR) >> 24) & 0x1f) + 1) - -static void master_clk_init(struct clk *clk) -{ - clk->parent = clk_get(NULL, "cpu_clk"); -} - -static void master_clk_recalc(struct clk *clk) -{ - int idx = (ctrl_inl(FRQCR) & 0x000f); - clk->rate *= clk->parent->rate * multipliers[idx] / divisors[idx]; -} - -static struct clk_ops sh7343_master_clk_ops = { - .init = master_clk_init, - .recalc = master_clk_recalc, -}; - -static void module_clk_init(struct clk *clk) -{ - clk->parent = NULL; - clk->rate = CONFIG_SH_PCLK_FREQ; -} - -static struct clk_ops sh7343_module_clk_ops = { - .init = module_clk_init, -}; - -static void bus_clk_init(struct clk *clk) -{ - clk->parent = clk_get(NULL, "cpu_clk"); -} - -static void bus_clk_recalc(struct clk *clk) -{ - int idx = (ctrl_inl(FRQCR) >> 8) & 0x000f; - clk->rate = clk->parent->rate * multipliers[idx] / divisors[idx]; -} - -static struct clk_ops sh7343_bus_clk_ops = { - .init = bus_clk_init, - .recalc = bus_clk_recalc, -}; - -static void cpu_clk_init(struct clk *clk) -{ - clk->parent = clk_get(NULL, "module_clk"); - clk->flags |= CLK_RATE_PROPAGATES; - clk_set_rate(clk, clk_get_rate(clk)); -} - -static void cpu_clk_recalc(struct clk *clk) -{ - int idx = (ctrl_inl(FRQCR) >> 20) & 0x000f; - clk->rate = clk->parent->rate * pll_calc() * - multipliers[idx] / divisors[idx]; -} - -static struct clk_ops sh7343_cpu_clk_ops = { - .init = cpu_clk_init, - .recalc = cpu_clk_recalc, -}; - -static struct clk_ops *sh7343_clk_ops[] = { - &sh7343_master_clk_ops, - &sh7343_module_clk_ops, - &sh7343_bus_clk_ops, - &sh7343_cpu_clk_ops, -}; - -void __init arch_init_clk_ops(struct clk_ops **ops, int idx) -{ - if (idx < ARRAY_SIZE(sh7343_clk_ops)) - *ops = sh7343_clk_ops[idx]; -} diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7722.c b/arch/sh/kernel/cpu/sh4a/clock-sh7722.c index 299138ebe160..db913855c2fd 100644 --- a/arch/sh/kernel/cpu/sh4a/clock-sh7722.c +++ b/arch/sh/kernel/cpu/sh4a/clock-sh7722.c @@ -1,7 +1,7 @@ /* * arch/sh/kernel/cpu/sh4a/clock-sh7722.c * - * SH7722 & SH7366 support for the clock framework + * SH7343, SH7722, SH7723 & SH7366 support for the clock framework * * Copyright (c) 2006-2007 Nomad Global Solutions Inc * Based on code for sh7343 by Paul Mundt @@ -14,6 +14,7 @@ #include <linux/kernel.h> #include <linux/io.h> #include <linux/errno.h> +#include <linux/stringify.h> #include <asm/clock.h> #include <asm/freq.h> @@ -411,40 +412,40 @@ static struct clk_ops sh7722_frqcr_clk_ops = { * clock ops methods for SIU A/B and IrDA clock * */ -static int sh7722_siu_which(struct clk *clk) + +#ifndef CONFIG_CPU_SUBTYPE_SH7343 + +static int sh7722_siu_set_rate(struct clk *clk, unsigned long rate, int algo_id) { - if (!strcmp(clk->name, "siu_a_clk")) - return 0; - if (!strcmp(clk->name, "siu_b_clk")) - return 1; -#if defined(CONFIG_CPU_SUBTYPE_SH7722) - if (!strcmp(clk->name, "irda_clk")) - return 2; -#endif - return -EINVAL; + unsigned long r; + int div; + + r = ctrl_inl(clk->arch_flags); + div = sh7722_find_divisors(clk->parent->rate, rate); + if (div < 0) + return div; + r = (r & ~0xF) | div; + ctrl_outl(r, clk->arch_flags); + return 0; } -static unsigned long sh7722_siu_regs[] = { - [0] = SCLKACR, - [1] = SCLKBCR, -#if defined(CONFIG_CPU_SUBTYPE_SH7722) - [2] = IrDACLKCR, -#endif -}; +static void sh7722_siu_recalc(struct clk *clk) +{ + unsigned long r; + + r = ctrl_inl(clk->arch_flags); + clk->rate = clk->parent->rate * 2 / divisors2[r & 0xF]; +} static int sh7722_siu_start_stop(struct clk *clk, int enable) { - int siu = sh7722_siu_which(clk); unsigned long r; - if (siu < 0) - return siu; - BUG_ON(siu > 2); - r = ctrl_inl(sh7722_siu_regs[siu]); + r = ctrl_inl(clk->arch_flags); if (enable) - ctrl_outl(r & ~(1 << 8), sh7722_siu_regs[siu]); + ctrl_outl(r & ~(1 << 8), clk->arch_flags); else - ctrl_outl(r | (1 << 8), sh7722_siu_regs[siu]); + ctrl_outl(r | (1 << 8), clk->arch_flags); return 0; } @@ -458,6 +459,15 @@ static void sh7722_siu_disable(struct clk *clk) sh7722_siu_start_stop(clk, 0); } +static struct clk_ops sh7722_siu_clk_ops = { + .recalc = sh7722_siu_recalc, + .set_rate = sh7722_siu_set_rate, + .enable = sh7722_siu_enable, + .disable = sh7722_siu_disable, +}; + +#endif /* CONFIG_CPU_SUBTYPE_SH7343 */ + static void sh7722_video_enable(struct clk *clk) { unsigned long r; @@ -494,43 +504,6 @@ static void sh7722_video_recalc(struct clk *clk) clk->rate = clk->parent->rate / ((r & 0x3F) + 1); } -static int sh7722_siu_set_rate(struct clk *clk, unsigned long rate, int algo_id) -{ - int siu = sh7722_siu_which(clk); - unsigned long r; - int div; - - if (siu < 0) - return siu; - BUG_ON(siu > 2); - r = ctrl_inl(sh7722_siu_regs[siu]); - div = sh7722_find_divisors(clk->parent->rate, rate); - if (div < 0) - return div; - r = (r & ~0xF) | div; - ctrl_outl(r, sh7722_siu_regs[siu]); - return 0; -} - -static void sh7722_siu_recalc(struct clk *clk) -{ - int siu = sh7722_siu_which(clk); - unsigned long r; - - if (siu < 0) - return /* siu */ ; - BUG_ON(siu > 2); - r = ctrl_inl(sh7722_siu_regs[siu]); - clk->rate = clk->parent->rate * 2 / divisors2[r & 0xF]; -} - -static struct clk_ops sh7722_siu_clk_ops = { - .recalc = sh7722_siu_recalc, - .set_rate = sh7722_siu_set_rate, - .enable = sh7722_siu_enable, - .disable = sh7722_siu_disable, -}; - static struct clk_ops sh7722_video_clk_ops = { .recalc = sh7722_video_recalc, .set_rate = sh7722_video_set_rate, @@ -560,6 +533,9 @@ static struct clk sh7722_sdram_clock = { .ops = &sh7722_frqcr_clk_ops, }; + +#ifndef CONFIG_CPU_SUBTYPE_SH7343 + /* * these three clocks - SIU A, SIU B, IrDA - share the same clk_ops * methods of clk_ops determine which register they should access by @@ -567,36 +543,151 @@ static struct clk sh7722_sdram_clock = { */ static struct clk sh7722_siu_a_clock = { .name = "siu_a_clk", + .arch_flags = SCLKACR, .ops = &sh7722_siu_clk_ops, }; static struct clk sh7722_siu_b_clock = { .name = "siu_b_clk", + .arch_flags = SCLKBCR, .ops = &sh7722_siu_clk_ops, }; #if defined(CONFIG_CPU_SUBTYPE_SH7722) static struct clk sh7722_irda_clock = { .name = "irda_clk", + .arch_flags = IrDACLKCR, .ops = &sh7722_siu_clk_ops, }; #endif +#endif /* CONFIG_CPU_SUBTYPE_SH7343 */ static struct clk sh7722_video_clock = { .name = "video_clk", .ops = &sh7722_video_clk_ops, }; +static int sh7722_mstpcr_start_stop(struct clk *clk, unsigned long reg, + int enable) +{ + unsigned long bit = clk->arch_flags; + unsigned long r; + + r = ctrl_inl(reg); + + if (enable) + r &= ~(1 << bit); + else + r |= (1 << bit); + + ctrl_outl(r, reg); + return 0; +} + +static void sh7722_mstpcr0_enable(struct clk *clk) +{ + sh7722_mstpcr_start_stop(clk, MSTPCR0, 1); +} + +static void sh7722_mstpcr0_disable(struct clk *clk) +{ + sh7722_mstpcr_start_stop(clk, MSTPCR0, 0); +} + +static void sh7722_mstpcr1_enable(struct clk *clk) +{ + sh7722_mstpcr_start_stop(clk, MSTPCR1, 1); +} + +static void sh7722_mstpcr1_disable(struct clk *clk) +{ + sh7722_mstpcr_start_stop(clk, MSTPCR1, 0); +} + +static void sh7722_mstpcr2_enable(struct clk *clk) +{ + sh7722_mstpcr_start_stop(clk, MSTPCR2, 1); +} + +static void sh7722_mstpcr2_disable(struct clk *clk) +{ + sh7722_mstpcr_start_stop(clk, MSTPCR2, 0); +} + +static struct clk_ops sh7722_mstpcr0_clk_ops = { + .enable = sh7722_mstpcr0_enable, + .disable = sh7722_mstpcr0_disable, +}; + +static struct clk_ops sh7722_mstpcr1_clk_ops = { + .enable = sh7722_mstpcr1_enable, + .disable = sh7722_mstpcr1_disable, +}; + +static struct clk_ops sh7722_mstpcr2_clk_ops = { + .enable = sh7722_mstpcr2_enable, + .disable = sh7722_mstpcr2_disable, +}; + +#define DECLARE_MSTPCRN(regnr, bitnr, bitstr) \ +{ \ + .name = "mstp" __stringify(regnr) bitstr, \ + .arch_flags = bitnr, \ + .ops = &sh7722_mstpcr ## regnr ## _clk_ops, \ +} + +#define DECLARE_MSTPCR(regnr) \ + DECLARE_MSTPCRN(regnr, 31, "31"), \ + DECLARE_MSTPCRN(regnr, 30, "30"), \ + DECLARE_MSTPCRN(regnr, 29, "29"), \ + DECLARE_MSTPCRN(regnr, 28, "28"), \ + DECLARE_MSTPCRN(regnr, 27, "27"), \ + DECLARE_MSTPCRN(regnr, 26, "26"), \ + DECLARE_MSTPCRN(regnr, 25, "25"), \ + DECLARE_MSTPCRN(regnr, 24, "24"), \ + DECLARE_MSTPCRN(regnr, 23, "23"), \ + DECLARE_MSTPCRN(regnr, 22, "22"), \ + DECLARE_MSTPCRN(regnr, 21, "21"), \ + DECLARE_MSTPCRN(regnr, 20, "20"), \ + DECLARE_MSTPCRN(regnr, 19, "19"), \ + DECLARE_MSTPCRN(regnr, 18, "18"), \ + DECLARE_MSTPCRN(regnr, 17, "17"), \ + DECLARE_MSTPCRN(regnr, 16, "16"), \ + DECLARE_MSTPCRN(regnr, 15, "15"), \ + DECLARE_MSTPCRN(regnr, 14, "14"), \ + DECLARE_MSTPCRN(regnr, 13, "13"), \ + DECLARE_MSTPCRN(regnr, 12, "12"), \ + DECLARE_MSTPCRN(regnr, 11, "11"), \ + DECLARE_MSTPCRN(regnr, 10, "10"), \ + DECLARE_MSTPCRN(regnr, 9, "09"), \ + DECLARE_MSTPCRN(regnr, 8, "08"), \ + DECLARE_MSTPCRN(regnr, 7, "07"), \ + DECLARE_MSTPCRN(regnr, 6, "06"), \ + DECLARE_MSTPCRN(regnr, 5, "05"), \ + DECLARE_MSTPCRN(regnr, 4, "04"), \ + DECLARE_MSTPCRN(regnr, 3, "03"), \ + DECLARE_MSTPCRN(regnr, 2, "02"), \ + DECLARE_MSTPCRN(regnr, 1, "01"), \ + DECLARE_MSTPCRN(regnr, 0, "00") + +static struct clk sh7722_mstpcr[] = { + DECLARE_MSTPCR(0), + DECLARE_MSTPCR(1), + DECLARE_MSTPCR(2), +}; + static struct clk *sh7722_clocks[] = { &sh7722_umem_clock, &sh7722_sh_clock, &sh7722_peripheral_clock, &sh7722_sdram_clock, +#ifndef CONFIG_CPU_SUBTYPE_SH7343 &sh7722_siu_a_clock, &sh7722_siu_b_clock, #if defined(CONFIG_CPU_SUBTYPE_SH7722) &sh7722_irda_clock, #endif +#endif &sh7722_video_clock, }; @@ -629,5 +720,11 @@ int __init arch_clk_init(void) clk_register(sh7722_clocks[i]); } clk_put(master); + + for (i = 0; i < ARRAY_SIZE(sh7722_mstpcr); i++) { + pr_debug( "Registering mstpcr '%s'\n", sh7722_mstpcr[i].name); + clk_register(&sh7722_mstpcr[i]); + } + return 0; } diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7343.c b/arch/sh/kernel/cpu/sh4a/setup-sh7343.c index 6d4f50cd4aaf..78881b4214da 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7343.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7343.c @@ -11,6 +11,104 @@ #include <linux/init.h> #include <linux/serial.h> #include <linux/serial_sci.h> +#include <linux/uio_driver.h> +#include <asm/clock.h> + +static struct resource iic0_resources[] = { + [0] = { + .name = "IIC0", + .start = 0x04470000, + .end = 0x04470017, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 96, + .end = 99, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device iic0_device = { + .name = "i2c-sh_mobile", + .num_resources = ARRAY_SIZE(iic0_resources), + .resource = iic0_resources, +}; + +static struct resource iic1_resources[] = { + [0] = { + .name = "IIC1", + .start = 0x04750000, + .end = 0x04750017, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 44, + .end = 47, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device iic1_device = { + .name = "i2c-sh_mobile", + .num_resources = ARRAY_SIZE(iic1_resources), + .resource = iic1_resources, +}; + +static struct uio_info vpu_platform_data = { + .name = "VPU4", + .version = "0", + .irq = 60, +}; + +static struct resource vpu_resources[] = { + [0] = { + .name = "VPU", + .start = 0xfe900000, + .end = 0xfe9022eb, + .flags = IORESOURCE_MEM, + }, + [1] = { + /* place holder for contiguous memory */ + }, +}; + +static struct platform_device vpu_device = { + .name = "uio_pdrv_genirq", + .id = 0, + .dev = { + .platform_data = &vpu_platform_data, + }, + .resource = vpu_resources, + .num_resources = ARRAY_SIZE(vpu_resources), +}; + +static struct uio_info veu_platform_data = { + .name = "VEU", + .version = "0", + .irq = 54, +}; + +static struct resource veu_resources[] = { + [0] = { + .name = "VEU", + .start = 0xfe920000, + .end = 0xfe9200b7, + .flags = IORESOURCE_MEM, + }, + [1] = { + /* place holder for contiguous memory */ + }, +}; + +static struct platform_device veu_device = { + .name = "uio_pdrv_genirq", + .id = 1, + .dev = { + .platform_data = &veu_platform_data, + }, + .resource = veu_resources, + .num_resources = ARRAY_SIZE(veu_resources), +}; static struct plat_sci_port sci_platform_data[] = { { @@ -32,16 +130,171 @@ static struct platform_device sci_device = { }; static struct platform_device *sh7343_devices[] __initdata = { + &iic0_device, + &iic1_device, &sci_device, + &vpu_device, + &veu_device, }; static int __init sh7343_devices_setup(void) { + clk_always_enable("mstp031"); /* TLB */ + clk_always_enable("mstp030"); /* IC */ + clk_always_enable("mstp029"); /* OC */ + clk_always_enable("mstp028"); /* URAM */ + clk_always_enable("mstp026"); /* XYMEM */ + clk_always_enable("mstp023"); /* INTC3 */ + clk_always_enable("mstp022"); /* INTC */ + clk_always_enable("mstp020"); /* SuperHyway */ + clk_always_enable("mstp109"); /* I2C0 */ + clk_always_enable("mstp108"); /* I2C1 */ + clk_always_enable("mstp202"); /* VEU */ + clk_always_enable("mstp201"); /* VPU */ + + platform_resource_setup_memory(&vpu_device, "vpu", 1 << 20); + platform_resource_setup_memory(&veu_device, "veu", 2 << 20); + return platform_add_devices(sh7343_devices, ARRAY_SIZE(sh7343_devices)); } __initcall(sh7343_devices_setup); +enum { + UNUSED = 0, + + /* interrupt sources */ + IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7, + DMAC0, DMAC1, DMAC2, DMAC3, + VIO_CEUI, VIO_BEUI, VIO_VEUI, VOU, + MFI, VPU, TPU, Z3D4, USBI0, USBI1, + MMC_ERR, MMC_TRAN, MMC_FSTAT, MMC_FRDY, + DMAC4, DMAC5, DMAC_DADERR, + KEYSC, + SCIF, SCIF1, SCIF2, SCIF3, SCIF4, + SIOF0, SIOF1, SIO, + FLCTL_FLSTEI, FLCTL_FLENDI, FLCTL_FLTREQ0I, FLCTL_FLTREQ1I, + I2C0_ALI, I2C0_TACKI, I2C0_WAITI, I2C0_DTEI, + I2C1_ALI, I2C1_TACKI, I2C1_WAITI, I2C1_DTEI, + SIM_TEI, SIM_TXI, SIM_RXI, SIM_ERI, + IRDA, + SDHI0, SDHI1, SDHI2, SDHI3, + CMT, TSIF, SIU, + TMU0, TMU1, TMU2, + JPU, LCDC, + + /* interrupt groups */ + + DMAC0123, VIOVOU, MMC, DMAC45, FLCTL, I2C0, I2C1, SIM, SDHI, USB, +}; + +static struct intc_vect vectors[] __initdata = { + INTC_VECT(IRQ0, 0x600), INTC_VECT(IRQ1, 0x620), + INTC_VECT(IRQ2, 0x640), INTC_VECT(IRQ3, 0x660), + INTC_VECT(IRQ4, 0x680), INTC_VECT(IRQ5, 0x6a0), + INTC_VECT(IRQ6, 0x6c0), INTC_VECT(IRQ7, 0x6e0), + INTC_VECT(I2C1_ALI, 0x780), INTC_VECT(I2C1_TACKI, 0x7a0), + INTC_VECT(I2C1_WAITI, 0x7c0), INTC_VECT(I2C1_DTEI, 0x7e0), + INTC_VECT(DMAC0, 0x800), INTC_VECT(DMAC1, 0x820), + INTC_VECT(DMAC2, 0x840), INTC_VECT(DMAC3, 0x860), + INTC_VECT(VIO_CEUI, 0x880), INTC_VECT(VIO_BEUI, 0x8a0), + INTC_VECT(VIO_VEUI, 0x8c0), INTC_VECT(VOU, 0x8e0), + INTC_VECT(MFI, 0x900), INTC_VECT(VPU, 0x980), + INTC_VECT(TPU, 0x9a0), INTC_VECT(Z3D4, 0x9e0), + INTC_VECT(USBI0, 0xa20), INTC_VECT(USBI1, 0xa40), + INTC_VECT(MMC_ERR, 0xb00), INTC_VECT(MMC_TRAN, 0xb20), + INTC_VECT(MMC_FSTAT, 0xb40), INTC_VECT(MMC_FRDY, 0xb60), + INTC_VECT(DMAC4, 0xb80), INTC_VECT(DMAC5, 0xba0), + INTC_VECT(DMAC_DADERR, 0xbc0), INTC_VECT(KEYSC, 0xbe0), + INTC_VECT(SCIF, 0xc00), INTC_VECT(SCIF1, 0xc20), + INTC_VECT(SCIF2, 0xc40), INTC_VECT(SCIF3, 0xc60), + INTC_VECT(SIOF0, 0xc80), INTC_VECT(SIOF1, 0xca0), + INTC_VECT(SIO, 0xd00), + INTC_VECT(FLCTL_FLSTEI, 0xd80), INTC_VECT(FLCTL_FLENDI, 0xda0), + INTC_VECT(FLCTL_FLTREQ0I, 0xdc0), INTC_VECT(FLCTL_FLTREQ1I, 0xde0), + INTC_VECT(I2C0_ALI, 0xe00), INTC_VECT(I2C0_TACKI, 0xe20), + INTC_VECT(I2C0_WAITI, 0xe40), INTC_VECT(I2C0_DTEI, 0xe60), + INTC_VECT(SDHI0, 0xe80), INTC_VECT(SDHI1, 0xea0), + INTC_VECT(SDHI2, 0xec0), INTC_VECT(SDHI3, 0xee0), + INTC_VECT(CMT, 0xf00), INTC_VECT(TSIF, 0xf20), + INTC_VECT(SIU, 0xf80), + INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420), + INTC_VECT(TMU2, 0x440), + INTC_VECT(JPU, 0x560), INTC_VECT(LCDC, 0x580), +}; + +static struct intc_group groups[] __initdata = { + INTC_GROUP(DMAC0123, DMAC0, DMAC1, DMAC2, DMAC3), + INTC_GROUP(VIOVOU, VIO_CEUI, VIO_BEUI, VIO_VEUI, VOU), + INTC_GROUP(MMC, MMC_FRDY, MMC_FSTAT, MMC_TRAN, MMC_ERR), + INTC_GROUP(DMAC45, DMAC4, DMAC5, DMAC_DADERR), + INTC_GROUP(FLCTL, FLCTL_FLSTEI, FLCTL_FLENDI, + FLCTL_FLTREQ0I, FLCTL_FLTREQ1I), + INTC_GROUP(I2C0, I2C0_ALI, I2C0_TACKI, I2C0_WAITI, I2C0_DTEI), + INTC_GROUP(I2C1, I2C1_ALI, I2C1_TACKI, I2C1_WAITI, I2C1_DTEI), + INTC_GROUP(SIM, SIM_TEI, SIM_TXI, SIM_RXI, SIM_ERI), + INTC_GROUP(SDHI, SDHI0, SDHI1, SDHI2, SDHI3), + INTC_GROUP(USB, USBI0, USBI1), +}; + +static struct intc_mask_reg mask_registers[] __initdata = { + { 0xa4080084, 0xa40800c4, 8, /* IMR1 / IMCR1 */ + { VOU, VIO_VEUI, VIO_BEUI, VIO_CEUI, DMAC3, DMAC2, DMAC1, DMAC0 } }, + { 0xa4080088, 0xa40800c8, 8, /* IMR2 / IMCR2 */ + { 0, 0, 0, VPU, 0, 0, 0, MFI } }, + { 0xa408008c, 0xa40800cc, 8, /* IMR3 / IMCR3 */ + { SIM_TEI, SIM_TXI, SIM_RXI, SIM_ERI, 0, 0, 0, IRDA } }, + { 0xa4080090, 0xa40800d0, 8, /* IMR4 / IMCR4 */ + { 0, TMU2, TMU1, TMU0, JPU, 0, 0, LCDC } }, + { 0xa4080094, 0xa40800d4, 8, /* IMR5 / IMCR5 */ + { KEYSC, DMAC_DADERR, DMAC5, DMAC4, SCIF3, SCIF2, SCIF1, SCIF } }, + { 0xa4080098, 0xa40800d8, 8, /* IMR6 / IMCR6 */ + { 0, 0, 0, SIO, Z3D4, 0, SIOF1, SIOF0 } }, + { 0xa408009c, 0xa40800dc, 8, /* IMR7 / IMCR7 */ + { I2C0_DTEI, I2C0_WAITI, I2C0_TACKI, I2C0_ALI, + FLCTL_FLTREQ1I, FLCTL_FLTREQ0I, FLCTL_FLENDI, FLCTL_FLSTEI } }, + { 0xa40800a0, 0xa40800e0, 8, /* IMR8 / IMCR8 */ + { SDHI3, SDHI2, SDHI1, SDHI0, 0, 0, 0, SIU } }, + { 0xa40800a4, 0xa40800e4, 8, /* IMR9 / IMCR9 */ + { 0, 0, 0, CMT, 0, USBI1, USBI0 } }, + { 0xa40800a8, 0xa40800e8, 8, /* IMR10 / IMCR10 */ + { MMC_FRDY, MMC_FSTAT, MMC_TRAN, MMC_ERR } }, + { 0xa40800ac, 0xa40800ec, 8, /* IMR11 / IMCR11 */ + { I2C1_DTEI, I2C1_WAITI, I2C1_TACKI, I2C1_ALI, TPU, 0, 0, TSIF } }, + { 0xa4140044, 0xa4140064, 8, /* INTMSK00 / INTMSKCLR00 */ + { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } }, +}; + +static struct intc_prio_reg prio_registers[] __initdata = { + { 0xa4080000, 0, 16, 4, /* IPRA */ { TMU0, TMU1, TMU2 } }, + { 0xa4080004, 0, 16, 4, /* IPRB */ { JPU, LCDC, SIM } }, + { 0xa4080010, 0, 16, 4, /* IPRE */ { DMAC0123, VIOVOU, MFI, VPU } }, + { 0xa4080014, 0, 16, 4, /* IPRF */ { KEYSC, DMAC45, USB, CMT } }, + { 0xa4080018, 0, 16, 4, /* IPRG */ { SCIF, SCIF1, SCIF2, SCIF3 } }, + { 0xa408001c, 0, 16, 4, /* IPRH */ { SIOF0, SIOF1, FLCTL, I2C0 } }, + { 0xa4080020, 0, 16, 4, /* IPRI */ { SIO, 0, TSIF, I2C1 } }, + { 0xa4080024, 0, 16, 4, /* IPRJ */ { Z3D4, 0, SIU } }, + { 0xa4080028, 0, 16, 4, /* IPRK */ { 0, MMC, 0, SDHI } }, + { 0xa408002c, 0, 16, 4, /* IPRL */ { 0, 0, TPU } }, + { 0xa4140010, 0, 32, 4, /* INTPRI00 */ + { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } }, +}; + +static struct intc_sense_reg sense_registers[] __initdata = { + { 0xa414001c, 16, 2, /* ICR1 */ + { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } }, +}; + +static struct intc_mask_reg ack_registers[] __initdata = { + { 0xa4140024, 0, 8, /* INTREQ00 */ + { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } }, +}; + +static DECLARE_INTC_DESC_ACK(intc_desc, "sh7343", vectors, groups, + mask_registers, prio_registers, sense_registers, + ack_registers); + void __init plat_irq_setup(void) { + register_intc_controller(&intc_desc); } diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7366.c b/arch/sh/kernel/cpu/sh4a/setup-sh7366.c index f26b5cdad0d1..6851dba02f31 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7366.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7366.c @@ -13,6 +13,112 @@ #include <linux/init.h> #include <linux/serial.h> #include <linux/serial_sci.h> +#include <linux/uio_driver.h> +#include <asm/clock.h> + +static struct resource iic_resources[] = { + [0] = { + .name = "IIC", + .start = 0x04470000, + .end = 0x04470017, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 96, + .end = 99, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device iic_device = { + .name = "i2c-sh_mobile", + .num_resources = ARRAY_SIZE(iic_resources), + .resource = iic_resources, +}; + +static struct uio_info vpu_platform_data = { + .name = "VPU5", + .version = "0", + .irq = 60, +}; + +static struct resource vpu_resources[] = { + [0] = { + .name = "VPU", + .start = 0xfe900000, + .end = 0xfe902807, + .flags = IORESOURCE_MEM, + }, + [1] = { + /* place holder for contiguous memory */ + }, +}; + +static struct platform_device vpu_device = { + .name = "uio_pdrv_genirq", + .id = 0, + .dev = { + .platform_data = &vpu_platform_data, + }, + .resource = vpu_resources, + .num_resources = ARRAY_SIZE(vpu_resources), +}; + +static struct uio_info veu0_platform_data = { + .name = "VEU", + .version = "0", + .irq = 54, +}; + +static struct resource veu0_resources[] = { + [0] = { + .name = "VEU(1)", + .start = 0xfe920000, + .end = 0xfe9200b7, + .flags = IORESOURCE_MEM, + }, + [1] = { + /* place holder for contiguous memory */ + }, +}; + +static struct platform_device veu0_device = { + .name = "uio_pdrv_genirq", + .id = 1, + .dev = { + .platform_data = &veu0_platform_data, + }, + .resource = veu0_resources, + .num_resources = ARRAY_SIZE(veu0_resources), +}; + +static struct uio_info veu1_platform_data = { + .name = "VEU", + .version = "0", + .irq = 27, +}; + +static struct resource veu1_resources[] = { + [0] = { + .name = "VEU(2)", + .start = 0xfe924000, + .end = 0xfe9240b7, + .flags = IORESOURCE_MEM, + }, + [1] = { + /* place holder for contiguous memory */ + }, +}; + +static struct platform_device veu1_device = { + .name = "uio_pdrv_genirq", + .id = 2, + .dev = { + .platform_data = &veu1_platform_data, + }, + .resource = veu1_resources, + .num_resources = ARRAY_SIZE(veu1_resources), +}; static struct plat_sci_port sci_platform_data[] = { { @@ -34,11 +140,32 @@ static struct platform_device sci_device = { }; static struct platform_device *sh7366_devices[] __initdata = { + &iic_device, &sci_device, + &vpu_device, + &veu0_device, + &veu1_device, }; static int __init sh7366_devices_setup(void) { + clk_always_enable("mstp031"); /* TLB */ + clk_always_enable("mstp030"); /* IC */ + clk_always_enable("mstp029"); /* OC */ + clk_always_enable("mstp028"); /* RSMEM */ + clk_always_enable("mstp026"); /* XYMEM */ + clk_always_enable("mstp023"); /* INTC3 */ + clk_always_enable("mstp022"); /* INTC */ + clk_always_enable("mstp020"); /* SuperHyway */ + clk_always_enable("mstp109"); /* I2C */ + clk_always_enable("mstp207"); /* VEU-2 */ + clk_always_enable("mstp202"); /* VEU-1 */ + clk_always_enable("mstp201"); /* VPU */ + + platform_resource_setup_memory(&vpu_device, "vpu", 2 << 20); + platform_resource_setup_memory(&veu0_device, "veu0", 2 << 20); + platform_resource_setup_memory(&veu1_device, "veu1", 2 << 20); + return platform_add_devices(sh7366_devices, ARRAY_SIZE(sh7366_devices)); } @@ -97,7 +224,7 @@ static struct intc_vect vectors[] __initdata = { INTC_VECT(SIU, 0xf80), INTC_VECT(TMU0, 0x400), INTC_VECT(TMU1, 0x420), INTC_VECT(TMU2, 0x440), - INTC_VECT(VEU2, 0x580), INTC_VECT(LCDC, 0x580), + INTC_VECT(VEU2, 0x560), INTC_VECT(LCDC, 0x580), }; static struct intc_group groups[] __initdata = { @@ -163,8 +290,14 @@ static struct intc_sense_reg sense_registers[] __initdata = { { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } }, }; -static DECLARE_INTC_DESC(intc_desc, "sh7366", vectors, groups, - mask_registers, prio_registers, sense_registers); +static struct intc_mask_reg ack_registers[] __initdata = { + { 0xa4140024, 0, 8, /* INTREQ00 */ + { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } }, +}; + +static DECLARE_INTC_DESC_ACK(intc_desc, "sh7366", vectors, groups, + mask_registers, prio_registers, sense_registers, + ack_registers); void __init plat_irq_setup(void) { diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c index 62ebccf18b3c..de1ede92176e 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c @@ -12,6 +12,8 @@ #include <linux/serial.h> #include <linux/serial_sci.h> #include <linux/mm.h> +#include <linux/uio_driver.h> +#include <asm/clock.h> #include <asm/mmzone.h> static struct resource usbf_resources[] = { @@ -59,6 +61,62 @@ static struct platform_device iic_device = { .resource = iic_resources, }; +static struct uio_info vpu_platform_data = { + .name = "VPU4", + .version = "0", + .irq = 60, +}; + +static struct resource vpu_resources[] = { + [0] = { + .name = "VPU", + .start = 0xfe900000, + .end = 0xfe9022eb, + .flags = IORESOURCE_MEM, + }, + [1] = { + /* place holder for contiguous memory */ + }, +}; + +static struct platform_device vpu_device = { + .name = "uio_pdrv_genirq", + .id = 0, + .dev = { + .platform_data = &vpu_platform_data, + }, + .resource = vpu_resources, + .num_resources = ARRAY_SIZE(vpu_resources), +}; + +static struct uio_info veu_platform_data = { + .name = "VEU", + .version = "0", + .irq = 54, +}; + +static struct resource veu_resources[] = { + [0] = { + .name = "VEU", + .start = 0xfe920000, + .end = 0xfe9200b7, + .flags = IORESOURCE_MEM, + }, + [1] = { + /* place holder for contiguous memory */ + }, +}; + +static struct platform_device veu_device = { + .name = "uio_pdrv_genirq", + .id = 1, + .dev = { + .platform_data = &veu_platform_data, + }, + .resource = veu_resources, + .num_resources = ARRAY_SIZE(veu_resources), +}; + static struct plat_sci_port sci_platform_data[] = { { .mapbase = 0xffe00000, @@ -95,10 +153,27 @@ static struct platform_device *sh7722_devices[] __initdata = { &usbf_device, &iic_device, &sci_device, + &vpu_device, + &veu_device, }; static int __init sh7722_devices_setup(void) { + clk_always_enable("mstp031"); /* TLB */ + clk_always_enable("mstp030"); /* IC */ + clk_always_enable("mstp029"); /* OC */ + clk_always_enable("mstp028"); /* URAM */ + clk_always_enable("mstp026"); /* XYMEM */ + clk_always_enable("mstp022"); /* INTC */ + clk_always_enable("mstp020"); /* SuperHyway */ + clk_always_enable("mstp109"); /* I2C */ + clk_always_enable("mstp211"); /* USB */ + clk_always_enable("mstp202"); /* VEU */ + clk_always_enable("mstp201"); /* VPU */ + + platform_resource_setup_memory(&vpu_device, "vpu", 1 << 20); + platform_resource_setup_memory(&veu_device, "veu", 2 << 20); + return platform_add_devices(sh7722_devices, ARRAY_SIZE(sh7722_devices)); } @@ -229,8 +304,14 @@ static struct intc_sense_reg sense_registers[] __initdata = { { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } }, }; -static DECLARE_INTC_DESC(intc_desc, "sh7722", vectors, groups, - mask_registers, prio_registers, sense_registers); +static struct intc_mask_reg ack_registers[] __initdata = { + { 0xa4140024, 0, 8, /* INTREQ00 */ + { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } }, +}; + +static DECLARE_INTC_DESC_ACK(intc_desc, "sh7722", vectors, groups, + mask_registers, prio_registers, sense_registers, + ack_registers); void __init plat_irq_setup(void) { diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c index a0470f2f5479..cd6baffdc896 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c @@ -12,8 +12,94 @@ #include <linux/serial.h> #include <linux/mm.h> #include <linux/serial_sci.h> +#include <linux/uio_driver.h> +#include <asm/clock.h> #include <asm/mmzone.h> +static struct uio_info vpu_platform_data = { + .name = "VPU5", + .version = "0", + .irq = 60, +}; + +static struct resource vpu_resources[] = { + [0] = { + .name = "VPU", + .start = 0xfe900000, + .end = 0xfe902807, + .flags = IORESOURCE_MEM, + }, + [1] = { + /* place holder for contiguous memory */ + }, +}; + +static struct platform_device vpu_device = { + .name = "uio_pdrv_genirq", + .id = 0, + .dev = { + .platform_data = &vpu_platform_data, + }, + .resource = vpu_resources, + .num_resources = ARRAY_SIZE(vpu_resources), +}; + +static struct uio_info veu0_platform_data = { + .name = "VEU", + .version = "0", + .irq = 54, +}; + +static struct resource veu0_resources[] = { + [0] = { + .name = "VEU2H0", + .start = 0xfe920000, + .end = 0xfe92027b, + .flags = IORESOURCE_MEM, + }, + [1] = { + /* place holder for contiguous memory */ + }, +}; + +static struct platform_device veu0_device = { + .name = "uio_pdrv_genirq", + .id = 1, + .dev = { + .platform_data = &veu0_platform_data, + }, + .resource = veu0_resources, + .num_resources = ARRAY_SIZE(veu0_resources), +}; + +static struct uio_info veu1_platform_data = { + .name = "VEU", + .version = "0", + .irq = 27, +}; + +static struct resource veu1_resources[] = { + [0] = { + .name = "VEU2H1", + .start = 0xfe924000, + .end = 0xfe92427b, + .flags = IORESOURCE_MEM, + }, + [1] = { + /* place holder for contiguous memory */ + }, +}; + +static struct platform_device veu1_device = { + .name = "uio_pdrv_genirq", + .id = 2, + .dev = { + .platform_data = &veu1_platform_data, + }, + .resource = veu1_resources, + .num_resources = ARRAY_SIZE(veu1_resources), +}; + static struct plat_sci_port sci_platform_data[] = { { .mapbase = 0xffe00000, @@ -113,14 +199,56 @@ static struct platform_device sh7723_usb_host_device = { .resource = sh7723_usb_host_resources, }; +static struct resource iic_resources[] = { + [0] = { + .name = "IIC", + .start = 0x04470000, + .end = 0x04470017, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 96, + .end = 99, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device iic_device = { + .name = "i2c-sh_mobile", + .num_resources = ARRAY_SIZE(iic_resources), + .resource = iic_resources, +}; + static struct platform_device *sh7723_devices[] __initdata = { &sci_device, &rtc_device, + &iic_device, &sh7723_usb_host_device, + &vpu_device, + &veu0_device, + &veu1_device, }; static int __init sh7723_devices_setup(void) { + clk_always_enable("mstp031"); /* TLB */ + clk_always_enable("mstp030"); /* IC */ + clk_always_enable("mstp029"); /* OC */ + clk_always_enable("mstp024"); /* FPU */ + clk_always_enable("mstp022"); /* INTC */ + clk_always_enable("mstp020"); /* SuperHyway */ + clk_always_enable("mstp000"); /* MERAM */ + clk_always_enable("mstp109"); /* I2C */ + clk_always_enable("mstp108"); /* RTC */ + clk_always_enable("mstp211"); /* USB */ + clk_always_enable("mstp206"); /* VEU2H1 */ + clk_always_enable("mstp202"); /* VEU2H0 */ + clk_always_enable("mstp201"); /* VPU */ + + platform_resource_setup_memory(&vpu_device, "vpu", 2 << 20); + platform_resource_setup_memory(&veu0_device, "veu0", 2 << 20); + platform_resource_setup_memory(&veu1_device, "veu1", 2 << 20); + return platform_add_devices(sh7723_devices, ARRAY_SIZE(sh7723_devices)); } @@ -326,8 +454,14 @@ static struct intc_sense_reg sense_registers[] __initdata = { { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } }, }; -static DECLARE_INTC_DESC(intc_desc, "sh7723", vectors, groups, - mask_registers, prio_registers, sense_registers); +static struct intc_mask_reg ack_registers[] __initdata = { + { 0xa4140024, 0, 8, /* INTREQ00 */ + { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } }, +}; + +static DECLARE_INTC_DESC_ACK(intc_desc, "sh7723", vectors, groups, + mask_registers, prio_registers, sense_registers, + ack_registers); void __init plat_irq_setup(void) { diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7763.c b/arch/sh/kernel/cpu/sh4a/setup-sh7763.c index f189a559462b..3c5b629887a8 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7763.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7763.c @@ -3,6 +3,7 @@ * * Copyright (C) 2006 Paul Mundt * Copyright (C) 2007 Yoshihiro Shimoda + * Copyright (C) 2008 Nobuhiro Iwamatsu * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive @@ -56,6 +57,11 @@ static struct plat_sci_port sci_platform_data[] = { .type = PORT_SCIF, .irqs = { 76, 77, 79, 78 }, }, { + .mapbase = 0xffe10000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 104, 105, 107, 106 }, + }, { .flags = 0, } }; @@ -208,8 +214,8 @@ static struct intc_vect vectors[] __initdata = { INTC_VECT(TMU5, 0xe40), INTC_VECT(ADC, 0xe60), INTC_VECT(SSI0, 0xe80), INTC_VECT(SSI1, 0xea0), INTC_VECT(SSI2, 0xec0), INTC_VECT(SSI3, 0xee0), - INTC_VECT(SCIF1_ERI, 0xf00), INTC_VECT(SCIF1_RXI, 0xf20), - INTC_VECT(SCIF1_BRI, 0xf40), INTC_VECT(SCIF1_TXI, 0xf60), + INTC_VECT(SCIF2_ERI, 0xf00), INTC_VECT(SCIF2_RXI, 0xf20), + INTC_VECT(SCIF2_BRI, 0xf40), INTC_VECT(SCIF2_TXI, 0xf60), INTC_VECT(GPIO_CH0, 0xf80), INTC_VECT(GPIO_CH1, 0xfa0), INTC_VECT(GPIO_CH2, 0xfc0), INTC_VECT(GPIO_CH3, 0xfe0), }; @@ -290,9 +296,14 @@ static struct intc_sense_reg irq_sense_registers[] __initdata = { IRQ4, IRQ5, IRQ6, IRQ7 } }, }; -static DECLARE_INTC_DESC(intc_irq_desc, "sh7763-irq", irq_vectors, - NULL, irq_mask_registers, irq_prio_registers, - irq_sense_registers); +static struct intc_mask_reg irq_ack_registers[] __initdata = { + { 0xffd00024, 0, 32, /* INTREQ */ + { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } }, +}; + +static DECLARE_INTC_DESC_ACK(intc_irq_desc, "sh7763-irq", irq_vectors, + NULL, irq_mask_registers, irq_prio_registers, + irq_sense_registers, irq_ack_registers); /* External interrupt pins in IRL mode */ diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7780.c b/arch/sh/kernel/cpu/sh4a/setup-sh7780.c index 18dbbe23fea1..fb8200cc7440 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7780.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7780.c @@ -217,9 +217,14 @@ static struct intc_sense_reg irq_sense_registers[] __initdata = { IRQ4, IRQ5, IRQ6, IRQ7 } }, }; -static DECLARE_INTC_DESC(intc_irq_desc, "sh7780-irq", irq_vectors, - NULL, irq_mask_registers, irq_prio_registers, - irq_sense_registers); +static struct intc_mask_reg irq_ack_registers[] __initdata = { + { 0xffd00024, 0, 32, /* INTREQ */ + { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } }, +}; + +static DECLARE_INTC_DESC_ACK(intc_irq_desc, "sh7780-irq", irq_vectors, + NULL, irq_mask_registers, irq_prio_registers, + irq_sense_registers, irq_ack_registers); /* External interrupt pins in IRL mode */ diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7785.c b/arch/sh/kernel/cpu/sh4a/setup-sh7785.c index 621e7329ec63..30baa63b24c8 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7785.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7785.c @@ -238,13 +238,18 @@ static struct intc_sense_reg sense_registers[] __initdata = { IRQ4, IRQ5, IRQ6, IRQ7 } }, }; -static DECLARE_INTC_DESC(intc_desc_irq0123, "sh7785-irq0123", vectors_irq0123, - NULL, mask_registers, prio_registers, - sense_registers); +static struct intc_mask_reg ack_registers[] __initdata = { + { 0xffd00024, 0, 32, /* INTREQ */ + { IRQ0, IRQ1, IRQ2, IRQ3, IRQ4, IRQ5, IRQ6, IRQ7 } }, +}; + +static DECLARE_INTC_DESC_ACK(intc_desc_irq0123, "sh7785-irq0123", + vectors_irq0123, NULL, mask_registers, + prio_registers, sense_registers, ack_registers); -static DECLARE_INTC_DESC(intc_desc_irq4567, "sh7785-irq4567", vectors_irq4567, - NULL, mask_registers, prio_registers, - sense_registers); +static DECLARE_INTC_DESC_ACK(intc_desc_irq4567, "sh7785-irq4567", + vectors_irq4567, NULL, mask_registers, + prio_registers, sense_registers, ack_registers); /* External interrupt pins in IRL mode */ diff --git a/arch/sh/kernel/cpu/sh5/entry.S b/arch/sh/kernel/cpu/sh5/entry.S index 05372ed6c568..04c7da968146 100644 --- a/arch/sh/kernel/cpu/sh5/entry.S +++ b/arch/sh/kernel/cpu/sh5/entry.S @@ -11,7 +11,7 @@ */ #include <linux/errno.h> #include <linux/sys.h> -#include <asm/cpu/registers.h> +#include <cpu/registers.h> #include <asm/processor.h> #include <asm/unistd.h> #include <asm/thread_info.h> @@ -987,11 +987,11 @@ work_resched: work_notifysig: gettr tr1, LINK - movi do_signal, r6 + movi do_notify_resume, r6 ptabs r6, tr0 or SP, ZERO, r2 - or ZERO, ZERO, r3 - blink tr0, LINK /* Call do_signal(regs, 0), return here */ + or r7, ZERO, r3 + blink tr0, LINK /* Call do_notify_resume(regs, current_thread_info->flags), return here */ restore_all: /* Do prefetches */ @@ -1300,18 +1300,20 @@ syscall_allowed: getcon KCR0, r2 ld.l r2, TI_FLAGS, r4 - movi (_TIF_SYSCALL_TRACE | _TIF_SINGLESTEP | _TIF_SYSCALL_AUDIT), r6 + movi _TIF_WORK_SYSCALL_MASK, r6 and r6, r4, r6 beq/l r6, ZERO, tr0 /* Trace it by calling syscall_trace before and after */ - movi syscall_trace, r4 + movi do_syscall_trace_enter, r4 or SP, ZERO, r2 - or ZERO, ZERO, r3 ptabs r4, tr0 blink tr0, LINK - /* Reload syscall number as r5 is trashed by syscall_trace */ + /* Save the retval */ + st.q SP, FRAME_R(2), r2 + + /* Reload syscall number as r5 is trashed by do_syscall_trace_enter */ ld.q SP, FRAME_S(FSYSCALL_ID), r5 andi r5, 0x1ff, r5 @@ -1343,9 +1345,8 @@ syscall_ret_trace: /* We get back here only if under trace */ st.q SP, FRAME_R(9), r2 /* Save return value */ - movi syscall_trace, LINK + movi do_syscall_trace_leave, LINK or SP, ZERO, r2 - movi 1, r3 ptabs LINK, tr0 blink tr0, LINK diff --git a/arch/sh/kernel/entry-common.S b/arch/sh/kernel/entry-common.S index 718bd2356b34..0bc17def55a7 100644 --- a/arch/sh/kernel/entry-common.S +++ b/arch/sh/kernel/entry-common.S @@ -192,7 +192,7 @@ work_resched: .align 2 1: .long schedule 2: .long do_notify_resume -3: .long restore_all +3: .long resume_userspace #ifdef CONFIG_TRACE_IRQFLAGS 4: .long trace_hardirqs_on 5: .long trace_hardirqs_off @@ -202,7 +202,7 @@ work_resched: syscall_exit_work: ! r0: current_thread_info->flags ! r8: current_thread_info - tst #_TIF_SYSCALL_TRACE | _TIF_SINGLESTEP | _TIF_SYSCALL_AUDIT, r0 + tst #_TIF_WORK_SYSCALL_MASK, r0 bt/s work_pending tst #_TIF_NEED_RESCHED, r0 #ifdef CONFIG_TRACE_IRQFLAGS @@ -211,10 +211,8 @@ syscall_exit_work: nop #endif sti - ! XXX setup arguments... mov r15, r4 - mov #1, r5 - mov.l 4f, r0 ! do_syscall_trace + mov.l 8f, r0 ! do_syscall_trace_leave jsr @r0 nop bra resume_userspace @@ -223,12 +221,11 @@ syscall_exit_work: .align 2 syscall_trace_entry: ! Yes it is traced. - ! XXX setup arguments... mov r15, r4 - mov #0, r5 - mov.l 4f, r11 ! Call do_syscall_trace which notifies + mov.l 7f, r11 ! Call do_syscall_trace_enter which notifies jsr @r11 ! superior (will chomp R[0-7]) nop + mov.l r0, @(OFF_R0,r15) ! Save return value ! Reload R0-R4 from kernel stack, where the ! parent may have modified them using ! ptrace(POKEUSR). (Note that R0-R2 are @@ -351,7 +348,7 @@ ENTRY(system_call) ! get_current_thread_info r8, r10 mov.l @(TI_FLAGS,r8), r8 - mov #(_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT), r10 + mov #_TIF_WORK_SYSCALL_MASK, r10 tst r10, r8 bf syscall_trace_entry ! @@ -389,8 +386,9 @@ syscall_exit: #endif 2: .long NR_syscalls 3: .long sys_call_table -4: .long do_syscall_trace #ifdef CONFIG_TRACE_IRQFLAGS 5: .long trace_hardirqs_on 6: .long trace_hardirqs_off #endif +7: .long do_syscall_trace_enter +8: .long do_syscall_trace_leave diff --git a/arch/sh/kernel/head_64.S b/arch/sh/kernel/head_64.S index f42d4c0feb76..7ccfb995a398 100644 --- a/arch/sh/kernel/head_64.S +++ b/arch/sh/kernel/head_64.S @@ -11,8 +11,8 @@ #include <asm/page.h> #include <asm/cache.h> #include <asm/tlb.h> -#include <asm/cpu/registers.h> -#include <asm/cpu/mmu_context.h> +#include <cpu/registers.h> +#include <cpu/mmu_context.h> #include <asm/thread_info.h> /* diff --git a/arch/sh/kernel/irq.c b/arch/sh/kernel/irq.c index a2a99e487e33..64b7690c664c 100644 --- a/arch/sh/kernel/irq.c +++ b/arch/sh/kernel/irq.c @@ -15,7 +15,7 @@ #include <asm/machvec.h> #include <asm/uaccess.h> #include <asm/thread_info.h> -#include <asm/cpu/mmu_context.h> +#include <cpu/mmu_context.h> atomic_t irq_err_count; diff --git a/arch/sh/kernel/machine_kexec.c b/arch/sh/kernel/machine_kexec.c index 5c17de51987e..4703dff174d5 100644 --- a/arch/sh/kernel/machine_kexec.c +++ b/arch/sh/kernel/machine_kexec.c @@ -13,6 +13,7 @@ #include <linux/kexec.h> #include <linux/delay.h> #include <linux/reboot.h> +#include <linux/numa.h> #include <asm/pgtable.h> #include <asm/pgalloc.h> #include <asm/mmu_context.h> @@ -70,7 +71,7 @@ static void kexec_info(struct kimage *image) * Do not allocate memory (or fail in any way) in machine_kexec(). * We are past the point of no return, committed to rebooting now. */ -NORET_TYPE void machine_kexec(struct kimage *image) +void machine_kexec(struct kimage *image) { unsigned long page_list; @@ -104,3 +105,10 @@ NORET_TYPE void machine_kexec(struct kimage *image) (*rnk)(page_list, reboot_code_buffer, image->start, vbr_reg); } +void arch_crash_save_vmcoreinfo(void) +{ +#ifdef CONFIG_NUMA + VMCOREINFO_SYMBOL(node_data); + VMCOREINFO_LENGTH(node_data, MAX_NUMNODES); +#endif +} diff --git a/arch/sh/kernel/module.c b/arch/sh/kernel/module.c index 5482e65375a9..c43081039dd5 100644 --- a/arch/sh/kernel/module.c +++ b/arch/sh/kernel/module.c @@ -27,6 +27,7 @@ #include <linux/moduleloader.h> #include <linux/elf.h> #include <linux/vmalloc.h> +#include <linux/bug.h> #include <linux/fs.h> #include <linux/string.h> #include <linux/kernel.h> @@ -36,7 +37,8 @@ void *module_alloc(unsigned long size) { if (size == 0) return NULL; - return vmalloc(size); + + return vmalloc_exec(size); } @@ -145,9 +147,10 @@ int module_finalize(const Elf_Ehdr *hdr, const Elf_Shdr *sechdrs, struct module *me) { - return 0; + return module_bug_finalize(hdr, sechdrs, me); } void module_arch_cleanup(struct module *mod) { + module_bug_cleanup(mod); } diff --git a/arch/sh/kernel/process_32.c b/arch/sh/kernel/process_32.c index b98e37a1f54c..3326a45749d9 100644 --- a/arch/sh/kernel/process_32.c +++ b/arch/sh/kernel/process_32.c @@ -34,18 +34,6 @@ void (*pm_idle)(void); void (*pm_power_off)(void); EXPORT_SYMBOL(pm_power_off); -void disable_hlt(void) -{ - hlt_counter++; -} -EXPORT_SYMBOL(disable_hlt); - -void enable_hlt(void) -{ - hlt_counter--; -} -EXPORT_SYMBOL(enable_hlt); - static int __init nohlt_setup(char *__unused) { hlt_counter = 1; @@ -60,7 +48,7 @@ static int __init hlt_setup(char *__unused) } __setup("hlt", hlt_setup); -void default_idle(void) +static void default_idle(void) { if (!hlt_counter) { clear_thread_flag(TIF_POLLING_NRFLAG); @@ -86,7 +74,7 @@ void cpu_idle(void) if (!idle) idle = default_idle; - tick_nohz_stop_sched_tick(); + tick_nohz_stop_sched_tick(1); while (!need_resched()) idle(); tick_nohz_restart_sched_tick(); diff --git a/arch/sh/kernel/process_64.c b/arch/sh/kernel/process_64.c index 0283d8133075..b9dbd2d3b4a5 100644 --- a/arch/sh/kernel/process_64.c +++ b/arch/sh/kernel/process_64.c @@ -36,16 +36,6 @@ static int hlt_counter = 1; #define HARD_IDLE_TIMEOUT (HZ / 3) -void disable_hlt(void) -{ - hlt_counter++; -} - -void enable_hlt(void) -{ - hlt_counter--; -} - static int __init nohlt_setup(char *__unused) { hlt_counter = 1; diff --git a/arch/sh/kernel/ptrace_32.c b/arch/sh/kernel/ptrace_32.c index fddb547f3c2b..035cb300d3dc 100644 --- a/arch/sh/kernel/ptrace_32.c +++ b/arch/sh/kernel/ptrace_32.c @@ -20,6 +20,8 @@ #include <linux/signal.h> #include <linux/io.h> #include <linux/audit.h> +#include <linux/seccomp.h> +#include <linux/tracehook.h> #include <asm/uaccess.h> #include <asm/pgtable.h> #include <asm/system.h> @@ -57,7 +59,23 @@ static inline int put_stack_long(struct task_struct *task, int offset, return 0; } -static void ptrace_disable_singlestep(struct task_struct *child) +void user_enable_single_step(struct task_struct *child) +{ + struct pt_regs *regs = task_pt_regs(child); + long pc; + + pc = get_stack_long(child, (long)®s->pc); + + /* Next scheduling will set up UBC */ + if (child->thread.ubc_pc == 0) + ubc_usercnt += 1; + + child->thread.ubc_pc = pc; + + set_tsk_thread_flag(child, TIF_SINGLESTEP); +} + +void user_disable_single_step(struct task_struct *child) { clear_tsk_thread_flag(child, TIF_SINGLESTEP); @@ -81,7 +99,7 @@ static void ptrace_disable_singlestep(struct task_struct *child) */ void ptrace_disable(struct task_struct *child) { - ptrace_disable_singlestep(child); + user_disable_single_step(child); } long arch_ptrace(struct task_struct *child, long request, long addr, long data) @@ -90,12 +108,6 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) int ret; switch (request) { - /* when I and D space are separate, these will need to be fixed. */ - case PTRACE_PEEKTEXT: /* read word at location addr. */ - case PTRACE_PEEKDATA: - ret = generic_ptrace_peekdata(child, addr, data); - break; - /* read the word at location addr in the USER area. */ case PTRACE_PEEKUSR: { unsigned long tmp; @@ -125,12 +137,6 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) break; } - /* when I and D space are separate, this will have to be fixed. */ - case PTRACE_POKETEXT: /* write the word at location addr. */ - case PTRACE_POKEDATA: - ret = generic_ptrace_pokedata(child, addr, data); - break; - case PTRACE_POKEUSR: /* write the word at location addr in the USER area */ ret = -EIO; if ((addr & 3) || addr < 0 || @@ -151,67 +157,6 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) } break; - case PTRACE_SYSCALL: /* continue and stop at next (return from) syscall */ - case PTRACE_CONT: { /* restart after signal. */ - ret = -EIO; - if (!valid_signal(data)) - break; - if (request == PTRACE_SYSCALL) - set_tsk_thread_flag(child, TIF_SYSCALL_TRACE); - else - clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE); - - ptrace_disable_singlestep(child); - - child->exit_code = data; - wake_up_process(child); - ret = 0; - break; - } - -/* - * make the child exit. Best I can do is send it a sigkill. - * perhaps it should be put in the status that it wants to - * exit. - */ - case PTRACE_KILL: { - ret = 0; - if (child->exit_state == EXIT_ZOMBIE) /* already dead */ - break; - ptrace_disable_singlestep(child); - child->exit_code = SIGKILL; - wake_up_process(child); - break; - } - - case PTRACE_SINGLESTEP: { /* set the trap flag. */ - long pc; - struct pt_regs *regs = NULL; - - ret = -EIO; - if (!valid_signal(data)) - break; - clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE); - if ((child->ptrace & PT_DTRACE) == 0) { - /* Spurious delayed TF traps may occur */ - child->ptrace |= PT_DTRACE; - } - - pc = get_stack_long(child, (long)®s->pc); - - /* Next scheduling will set up UBC */ - if (child->thread.ubc_pc == 0) - ubc_usercnt += 1; - child->thread.ubc_pc = pc; - - set_tsk_thread_flag(child, TIF_SINGLESTEP); - child->exit_code = data; - /* give it a chance to run. */ - wake_up_process(child); - ret = 0; - break; - } - #ifdef CONFIG_SH_DSP case PTRACE_GETDSPREGS: { unsigned long dp; @@ -241,6 +186,29 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) break; } #endif +#ifdef CONFIG_BINFMT_ELF_FDPIC + case PTRACE_GETFDPIC: { + unsigned long tmp = 0; + + switch (addr) { + case PTRACE_GETFDPIC_EXEC: + tmp = child->mm->context.exec_fdpic_loadmap; + break; + case PTRACE_GETFDPIC_INTERP: + tmp = child->mm->context.interp_fdpic_loadmap; + break; + default: + break; + } + + ret = 0; + if (put_user(tmp, (unsigned long *) data)) { + ret = -EFAULT; + break; + } + break; + } +#endif default: ret = ptrace_request(child, request, addr, data); break; @@ -249,39 +217,49 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) return ret; } -asmlinkage void do_syscall_trace(struct pt_regs *regs, int entryexit) +static inline int audit_arch(void) { - struct task_struct *tsk = current; + int arch = EM_SH; - if (unlikely(current->audit_context) && entryexit) - audit_syscall_exit(AUDITSC_RESULT(regs->regs[0]), - regs->regs[0]); +#ifdef CONFIG_CPU_LITTLE_ENDIAN + arch |= __AUDIT_ARCH_LE; +#endif - if (!test_thread_flag(TIF_SYSCALL_TRACE) && - !test_thread_flag(TIF_SINGLESTEP)) - goto out; - if (!(tsk->ptrace & PT_PTRACED)) - goto out; + return arch; +} - /* the 0x80 provides a way for the tracing parent to distinguish - between a syscall stop and SIGTRAP delivery */ - ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD) && - !test_thread_flag(TIF_SINGLESTEP) ? 0x80 : 0)); +asmlinkage long do_syscall_trace_enter(struct pt_regs *regs) +{ + long ret = 0; - /* - * this isn't the same as continuing with a signal, but it will do - * for normal use. strace only continues with a signal if the - * stopping signal is not SIGTRAP. -brl - */ - if (tsk->exit_code) { - send_sig(tsk->exit_code, tsk, 1); - tsk->exit_code = 0; - } + secure_computing(regs->regs[0]); -out: - if (unlikely(current->audit_context) && !entryexit) - audit_syscall_entry(AUDIT_ARCH_SH, regs->regs[3], + if (test_thread_flag(TIF_SYSCALL_TRACE) && + tracehook_report_syscall_entry(regs)) + /* + * Tracing decided this syscall should not happen. + * We'll return a bogus call number to get an ENOSYS + * error, but leave the original number in regs->regs[0]. + */ + ret = -1L; + + if (unlikely(current->audit_context)) + audit_syscall_entry(audit_arch(), regs->regs[3], regs->regs[4], regs->regs[5], regs->regs[6], regs->regs[7]); + return ret ?: regs->regs[0]; +} + +asmlinkage void do_syscall_trace_leave(struct pt_regs *regs) +{ + int step; + + if (unlikely(current->audit_context)) + audit_syscall_exit(AUDITSC_RESULT(regs->regs[0]), + regs->regs[0]); + + step = test_thread_flag(TIF_SINGLESTEP); + if (step || test_thread_flag(TIF_SYSCALL_TRACE)) + tracehook_report_syscall_exit(regs, step); } diff --git a/arch/sh/kernel/ptrace_64.c b/arch/sh/kernel/ptrace_64.c index d453c47dc522..5922edd416db 100644 --- a/arch/sh/kernel/ptrace_64.c +++ b/arch/sh/kernel/ptrace_64.c @@ -27,6 +27,8 @@ #include <linux/signal.h> #include <linux/syscalls.h> #include <linux/audit.h> +#include <linux/seccomp.h> +#include <linux/tracehook.h> #include <asm/io.h> #include <asm/uaccess.h> #include <asm/pgtable.h> @@ -120,18 +122,23 @@ put_fpu_long(struct task_struct *task, unsigned long addr, unsigned long data) return 0; } +void user_enable_single_step(struct task_struct *child) +{ + struct pt_regs *regs = child->thread.uregs; + + regs->sr |= SR_SSTEP; /* auto-resetting upon exception */ +} + +void user_disable_single_step(struct task_struct *child) +{ + regs->sr &= ~SR_SSTEP; +} long arch_ptrace(struct task_struct *child, long request, long addr, long data) { int ret; switch (request) { - /* when I and D space are separate, these will need to be fixed. */ - case PTRACE_PEEKTEXT: /* read word at location addr. */ - case PTRACE_PEEKDATA: - ret = generic_ptrace_peekdata(child, addr, data); - break; - /* read the word at location addr in the USER area. */ case PTRACE_PEEKUSR: { unsigned long tmp; @@ -154,12 +161,6 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) break; } - /* when I and D space are separate, this will have to be fixed. */ - case PTRACE_POKETEXT: /* write the word at location addr. */ - case PTRACE_POKEDATA: - ret = generic_ptrace_pokedata(child, addr, data); - break; - case PTRACE_POKEUSR: /* write the word at location addr in the USER area. We must disallow any changes to certain SR bits or u_fpvalid, since @@ -191,58 +192,6 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) } break; - case PTRACE_SYSCALL: /* continue and stop at next (return from) syscall */ - case PTRACE_CONT: { /* restart after signal. */ - ret = -EIO; - if (!valid_signal(data)) - break; - if (request == PTRACE_SYSCALL) - set_tsk_thread_flag(child, TIF_SYSCALL_TRACE); - else - clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE); - child->exit_code = data; - wake_up_process(child); - ret = 0; - break; - } - -/* - * make the child exit. Best I can do is send it a sigkill. - * perhaps it should be put in the status that it wants to - * exit. - */ - case PTRACE_KILL: { - ret = 0; - if (child->exit_state == EXIT_ZOMBIE) /* already dead */ - break; - child->exit_code = SIGKILL; - wake_up_process(child); - break; - } - - case PTRACE_SINGLESTEP: { /* set the trap flag. */ - struct pt_regs *regs; - - ret = -EIO; - if (!valid_signal(data)) - break; - clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE); - if ((child->ptrace & PT_DTRACE) == 0) { - /* Spurious delayed TF traps may occur */ - child->ptrace |= PT_DTRACE; - } - - regs = child->thread.uregs; - - regs->sr |= SR_SSTEP; /* auto-resetting upon exception */ - - child->exit_code = data; - /* give it a chance to run. */ - wake_up_process(child); - ret = 0; - break; - } - default: ret = ptrace_request(child, request, addr, data); break; @@ -273,38 +222,51 @@ asmlinkage int sh64_ptrace(long request, long pid, long addr, long data) return sys_ptrace(request, pid, addr, data); } -asmlinkage void syscall_trace(struct pt_regs *regs, int entryexit) +static inline int audit_arch(void) { - struct task_struct *tsk = current; + int arch = EM_SH; - if (unlikely(current->audit_context) && entryexit) - audit_syscall_exit(AUDITSC_RESULT(regs->regs[9]), - regs->regs[9]); +#ifdef CONFIG_64BIT + arch |= __AUDIT_ARCH_64BIT; +#endif +#ifdef CONFIG_CPU_LITTLE_ENDIAN + arch |= __AUDIT_ARCH_LE; +#endif - if (!test_thread_flag(TIF_SYSCALL_TRACE) && - !test_thread_flag(TIF_SINGLESTEP)) - goto out; - if (!(tsk->ptrace & PT_PTRACED)) - goto out; - - ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD) && - !test_thread_flag(TIF_SINGLESTEP) ? 0x80 : 0)); - - /* - * this isn't the same as continuing with a signal, but it will do - * for normal use. strace only continues with a signal if the - * stopping signal is not SIGTRAP. -brl - */ - if (tsk->exit_code) { - send_sig(tsk->exit_code, tsk, 1); - tsk->exit_code = 0; - } + return arch; +} -out: - if (unlikely(current->audit_context) && !entryexit) - audit_syscall_entry(AUDIT_ARCH_SH, regs->regs[1], +asmlinkage long long do_syscall_trace_enter(struct pt_regs *regs) +{ + long long ret = 0; + + secure_computing(regs->regs[9]); + + if (test_thread_flag(TIF_SYSCALL_TRACE) && + tracehook_report_syscall_entry(regs)) + /* + * Tracing decided this syscall should not happen. + * We'll return a bogus call number to get an ENOSYS + * error, but leave the original number in regs->regs[0]. + */ + ret = -1LL; + + if (unlikely(current->audit_context)) + audit_syscall_entry(audit_arch(), regs->regs[1], regs->regs[2], regs->regs[3], regs->regs[4], regs->regs[5]); + + return ret ?: regs->regs[9]; +} + +asmlinkage void do_syscall_trace_leave(struct pt_regs *regs) +{ + if (unlikely(current->audit_context)) + audit_syscall_exit(AUDITSC_RESULT(regs->regs[9]), + regs->regs[9]); + + if (test_thread_flag(TIF_SYSCALL_TRACE)) + tracehook_report_syscall_exit(regs, 0); } /* Called with interrupts disabled */ @@ -338,5 +300,5 @@ asmlinkage void do_software_break_point(unsigned long long vec, */ void ptrace_disable(struct task_struct *child) { - /* nothing to do.. */ + user_disable_single_step(child); } diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c index bca2bbc575db..a35207655e7b 100644 --- a/arch/sh/kernel/setup.c +++ b/arch/sh/kernel/setup.c @@ -25,6 +25,7 @@ #include <linux/smp.h> #include <linux/err.h> #include <linux/debugfs.h> +#include <linux/crash_dump.h> #include <asm/uaccess.h> #include <asm/io.h> #include <asm/page.h> @@ -286,6 +287,25 @@ static void __init setup_memory(void) extern void __init setup_memory(void); #endif +/* + * Note: elfcorehdr_addr is not just limited to vmcore. It is also used by + * is_kdump_kernel() to determine if we are booting after a panic. Hence + * ifdef it under CONFIG_CRASH_DUMP and not CONFIG_PROC_VMCORE. + */ +#ifdef CONFIG_CRASH_DUMP +/* elfcorehdr= specifies the location of elf core header + * stored by the crashed kernel. + */ +static int __init parse_elfcorehdr(char *arg) +{ + if (!arg) + return -EINVAL; + elfcorehdr_addr = memparse(arg, &arg); + return 0; +} +early_param("elfcorehdr", parse_elfcorehdr); +#endif + void __init setup_arch(char **cmdline_p) { enable_mmu(); @@ -398,6 +418,7 @@ const char *get_cpu_subtype(struct sh_cpuinfo *c) { return cpu_name[c->type]; } +EXPORT_SYMBOL(get_cpu_subtype); #ifdef CONFIG_PROC_FS /* Symbolic CPU flags, keep in sync with asm/cpu-features.h */ @@ -452,6 +473,12 @@ static int show_cpuinfo(struct seq_file *m, void *v) seq_printf(m, "processor\t: %d\n", cpu); seq_printf(m, "cpu family\t: %s\n", init_utsname()->machine); seq_printf(m, "cpu type\t: %s\n", get_cpu_subtype(c)); + if (c->cut_major == -1) + seq_printf(m, "cut\t\t: unknown\n"); + else if (c->cut_minor == -1) + seq_printf(m, "cut\t\t: %d.x\n", c->cut_major); + else + seq_printf(m, "cut\t\t: %d.%d\n", c->cut_major, c->cut_minor); show_cpuflags(m, c); diff --git a/arch/sh/kernel/signal_32.c b/arch/sh/kernel/signal_32.c index f311551d9a05..51689d29ad45 100644 --- a/arch/sh/kernel/signal_32.c +++ b/arch/sh/kernel/signal_32.c @@ -24,6 +24,7 @@ #include <linux/binfmts.h> #include <linux/freezer.h> #include <linux/io.h> +#include <linux/tracehook.h> #include <asm/system.h> #include <asm/ucontext.h> #include <asm/uaccess.h> @@ -33,6 +34,11 @@ #define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP))) +struct fdpic_func_descriptor { + unsigned long text; + unsigned long GOT; +}; + /* * Atomically swap in the new signal mask, and wait for a signal. */ @@ -368,6 +374,7 @@ static int setup_frame(int sig, struct k_sigaction *ka, err |= __put_user(OR_R0_R0, &frame->retcode[6]); err |= __put_user((__NR_sigreturn), &frame->retcode[7]); regs->pr = (unsigned long) frame->retcode; + flush_icache_range(regs->pr, regs->pr + sizeof(frame->retcode)); } if (err) @@ -378,18 +385,21 @@ static int setup_frame(int sig, struct k_sigaction *ka, regs->regs[4] = signal; /* Arg for signal handler */ regs->regs[5] = 0; regs->regs[6] = (unsigned long) &frame->sc; - regs->pc = (unsigned long) ka->sa.sa_handler; + + if (current->personality & FDPIC_FUNCPTRS) { + struct fdpic_func_descriptor __user *funcptr = + (struct fdpic_func_descriptor __user *)ka->sa.sa_handler; + + __get_user(regs->pc, &funcptr->text); + __get_user(regs->regs[12], &funcptr->GOT); + } else + regs->pc = (unsigned long)ka->sa.sa_handler; set_fs(USER_DS); pr_debug("SIG deliver (%s:%d): sp=%p pc=%08lx pr=%08lx\n", current->comm, task_pid_nr(current), frame, regs->pc, regs->pr); - flush_cache_sigtramp(regs->pr); - - if ((-regs->pr & (L1_CACHE_BYTES-1)) < sizeof(frame->retcode)) - flush_cache_sigtramp(regs->pr + L1_CACHE_BYTES); - return 0; give_sigsegv: @@ -458,17 +468,22 @@ static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, regs->regs[4] = signal; /* Arg for signal handler */ regs->regs[5] = (unsigned long) &frame->info; regs->regs[6] = (unsigned long) &frame->uc; - regs->pc = (unsigned long) ka->sa.sa_handler; + + if (current->personality & FDPIC_FUNCPTRS) { + struct fdpic_func_descriptor __user *funcptr = + (struct fdpic_func_descriptor __user *)ka->sa.sa_handler; + + __get_user(regs->pc, &funcptr->text); + __get_user(regs->regs[12], &funcptr->GOT); + } else + regs->pc = (unsigned long)ka->sa.sa_handler; set_fs(USER_DS); pr_debug("SIG deliver (%s:%d): sp=%p pc=%08lx pr=%08lx\n", current->comm, task_pid_nr(current), frame, regs->pc, regs->pr); - flush_cache_sigtramp(regs->pr); - - if ((-regs->pr & (L1_CACHE_BYTES-1)) < sizeof(frame->retcode)) - flush_cache_sigtramp(regs->pr + L1_CACHE_BYTES); + flush_icache_range(regs->pr, regs->pr + sizeof(frame->retcode)); return 0; @@ -493,14 +508,13 @@ handle_signal(unsigned long sig, struct k_sigaction *ka, siginfo_t *info, switch (regs->regs[0]) { case -ERESTART_RESTARTBLOCK: case -ERESTARTNOHAND: + no_system_call_restart: regs->regs[0] = -EINTR; break; case -ERESTARTSYS: - if (!(ka->sa.sa_flags & SA_RESTART)) { - regs->regs[0] = -EINTR; - break; - } + if (!(ka->sa.sa_flags & SA_RESTART)) + goto no_system_call_restart; /* fallthrough */ case -ERESTARTNOINTR: regs->regs[0] = save_r0; @@ -575,12 +589,15 @@ static void do_signal(struct pt_regs *regs, unsigned int save_r0) * clear the TIF_RESTORE_SIGMASK flag */ if (test_thread_flag(TIF_RESTORE_SIGMASK)) clear_thread_flag(TIF_RESTORE_SIGMASK); + + tracehook_signal_handler(signr, &info, &ka, regs, + test_thread_flag(TIF_SINGLESTEP)); } return; } - no_signal: +no_signal: /* Did we come from a system call? */ if (regs->tra >= 0) { /* Restart the system call - no handlers present */ @@ -604,9 +621,14 @@ static void do_signal(struct pt_regs *regs, unsigned int save_r0) } asmlinkage void do_notify_resume(struct pt_regs *regs, unsigned int save_r0, - __u32 thread_info_flags) + unsigned long thread_info_flags) { /* deal with pending signal delivery */ - if (thread_info_flags & (_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK)) + if (thread_info_flags & _TIF_SIGPENDING) do_signal(regs, save_r0); + + if (thread_info_flags & _TIF_NOTIFY_RESUME) { + clear_thread_flag(TIF_NOTIFY_RESUME); + tracehook_notify_resume(regs); + } } diff --git a/arch/sh/kernel/signal_64.c b/arch/sh/kernel/signal_64.c index 552eb810cd85..1d62dfef77f1 100644 --- a/arch/sh/kernel/signal_64.c +++ b/arch/sh/kernel/signal_64.c @@ -22,6 +22,7 @@ #include <linux/ptrace.h> #include <linux/unistd.h> #include <linux/stddef.h> +#include <linux/tracehook.h> #include <asm/ucontext.h> #include <asm/uaccess.h> #include <asm/pgtable.h> @@ -42,7 +43,84 @@ #define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP))) -asmlinkage int do_signal(struct pt_regs *regs, sigset_t *oldset); +/* + * Note that 'init' is a special process: it doesn't get signals it doesn't + * want to handle. Thus you cannot kill init even with a SIGKILL even by + * mistake. + * + * Note that we go through the signals twice: once to check the signals that + * the kernel can handle, and then we build all the user-level signal handling + * stack-frames in one go after that. + */ +static int do_signal(struct pt_regs *regs, sigset_t *oldset) +{ + siginfo_t info; + int signr; + struct k_sigaction ka; + + /* + * We want the common case to go fast, which + * is why we may in certain cases get here from + * kernel mode. Just return without doing anything + * if so. + */ + if (!user_mode(regs)) + return 1; + + if (try_to_freeze()) + goto no_signal; + + if (test_thread_flag(TIF_RESTORE_SIGMASK)) + oldset = ¤t->saved_sigmask; + else if (!oldset) + oldset = ¤t->blocked; + + signr = get_signal_to_deliver(&info, &ka, regs, 0); + + if (signr > 0) { + /* Whee! Actually deliver the signal. */ + handle_signal(signr, &info, &ka, oldset, regs); + + /* + * If a signal was successfully delivered, the saved sigmask + * is in its frame, and we can clear the TIF_RESTORE_SIGMASK + * flag. + */ + if (test_thread_flag(TIF_RESTORE_SIGMASK)) + clear_thread_flag(TIF_RESTORE_SIGMASK); + + tracehook_signal_handler(signr, &info, &ka, regs, 0); + return 1; + } + +no_signal: + /* Did we come from a system call? */ + if (regs->syscall_nr >= 0) { + /* Restart the system call - no handlers present */ + switch (regs->regs[REG_RET]) { + case -ERESTARTNOHAND: + case -ERESTARTSYS: + case -ERESTARTNOINTR: + /* Decode Syscall # */ + regs->regs[REG_RET] = regs->syscall_nr; + regs->pc -= 4; + break; + + case -ERESTART_RESTARTBLOCK: + regs->regs[REG_RET] = __NR_restart_syscall; + regs->pc -= 4; + break; + } + } + + /* No signal to deliver -- put the saved sigmask back */ + if (test_thread_flag(TIF_RESTORE_SIGMASK)) { + clear_thread_flag(TIF_RESTORE_SIGMASK); + sigprocmask(SIG_SETMASK, ¤t->saved_sigmask, NULL); + } + + return 0; +} /* * Atomically swap in the new signal mask, and wait for a signal. @@ -643,14 +721,13 @@ handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka, switch (regs->regs[REG_RET]) { case -ERESTART_RESTARTBLOCK: case -ERESTARTNOHAND: + no_system_call_restart: regs->regs[REG_RET] = -EINTR; break; case -ERESTARTSYS: - if (!(ka->sa.sa_flags & SA_RESTART)) { - regs->regs[REG_RET] = -EINTR; - break; - } + if (!(ka->sa.sa_flags & SA_RESTART)) + goto no_system_call_restart; /* fallthrough */ case -ERESTARTNOINTR: /* Decode syscall # */ @@ -673,80 +750,13 @@ handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka, spin_unlock_irq(¤t->sighand->siglock); } -/* - * Note that 'init' is a special process: it doesn't get signals it doesn't - * want to handle. Thus you cannot kill init even with a SIGKILL even by - * mistake. - * - * Note that we go through the signals twice: once to check the signals that - * the kernel can handle, and then we build all the user-level signal handling - * stack-frames in one go after that. - */ -int do_signal(struct pt_regs *regs, sigset_t *oldset) +asmlinkage void do_notify_resume(struct pt_regs *regs, unsigned long thread_info_flags) { - siginfo_t info; - int signr; - struct k_sigaction ka; - - /* - * We want the common case to go fast, which - * is why we may in certain cases get here from - * kernel mode. Just return without doing anything - * if so. - */ - if (!user_mode(regs)) - return 1; - - if (try_to_freeze()) - goto no_signal; - - if (test_thread_flag(TIF_RESTORE_SIGMASK)) - oldset = ¤t->saved_sigmask; - else if (!oldset) - oldset = ¤t->blocked; - - signr = get_signal_to_deliver(&info, &ka, regs, 0); - - if (signr > 0) { - /* Whee! Actually deliver the signal. */ - handle_signal(signr, &info, &ka, oldset, regs); + if (thread_info_flags & _TIF_SIGPENDING) + do_signal(regs, 0); - /* - * If a signal was successfully delivered, the saved sigmask - * is in its frame, and we can clear the TIF_RESTORE_SIGMASK - * flag. - */ - if (test_thread_flag(TIF_RESTORE_SIGMASK)) - clear_thread_flag(TIF_RESTORE_SIGMASK); - - return 1; + if (thread_info_flags & _TIF_NOTIFY_RESUME) { + clear_thread_flag(TIF_NOTIFY_RESUME); + tracehook_notify_resume(regs); } - -no_signal: - /* Did we come from a system call? */ - if (regs->syscall_nr >= 0) { - /* Restart the system call - no handlers present */ - switch (regs->regs[REG_RET]) { - case -ERESTARTNOHAND: - case -ERESTARTSYS: - case -ERESTARTNOINTR: - /* Decode Syscall # */ - regs->regs[REG_RET] = regs->syscall_nr; - regs->pc -= 4; - break; - - case -ERESTART_RESTARTBLOCK: - regs->regs[REG_RET] = __NR_restart_syscall; - regs->pc -= 4; - break; - } - } - - /* No signal to deliver -- put the saved sigmask back */ - if (test_thread_flag(TIF_RESTORE_SIGMASK)) { - clear_thread_flag(TIF_RESTORE_SIGMASK); - sigprocmask(SIG_SETMASK, ¤t->saved_sigmask, NULL); - } - - return 0; } diff --git a/arch/sh/kernel/smp.c b/arch/sh/kernel/smp.c index 5d039d168f57..60c50841143e 100644 --- a/arch/sh/kernel/smp.c +++ b/arch/sh/kernel/smp.c @@ -36,13 +36,6 @@ EXPORT_SYMBOL(cpu_possible_map); cpumask_t cpu_online_map; EXPORT_SYMBOL(cpu_online_map); -static atomic_t cpus_booted = ATOMIC_INIT(0); - -/* - * Run specified function on a particular processor. - */ -void __smp_call_function(unsigned int cpu); - static inline void __init smp_store_cpu_info(unsigned int cpu) { struct sh_cpuinfo *c = cpu_data + cpu; @@ -175,45 +168,20 @@ static void stop_this_cpu(void *unused) void smp_send_stop(void) { - smp_call_function(stop_this_cpu, 0, 1, 0); + smp_call_function(stop_this_cpu, 0, 0); } -struct smp_fn_call_struct smp_fn_call = { - .lock = __SPIN_LOCK_UNLOCKED(smp_fn_call.lock), - .finished = ATOMIC_INIT(0), -}; - -/* - * The caller of this wants the passed function to run on every cpu. If wait - * is set, wait until all cpus have finished the function before returning. - * The lock is here to protect the call structure. - * You must not call this function with disabled interrupts or from a - * hardware interrupt handler or from a bottom half handler. - */ -int smp_call_function(void (*func)(void *info), void *info, int retry, int wait) +void arch_send_call_function_ipi(cpumask_t mask) { - unsigned int nr_cpus = atomic_read(&cpus_booted); - int i; - - /* Can deadlock when called with interrupts disabled */ - WARN_ON(irqs_disabled()); - - spin_lock(&smp_fn_call.lock); - - atomic_set(&smp_fn_call.finished, 0); - smp_fn_call.fn = func; - smp_fn_call.data = info; - - for (i = 0; i < nr_cpus; i++) - if (i != smp_processor_id()) - plat_send_ipi(i, SMP_MSG_FUNCTION); - - if (wait) - while (atomic_read(&smp_fn_call.finished) != (nr_cpus - 1)); + int cpu; - spin_unlock(&smp_fn_call.lock); + for_each_cpu_mask(cpu, mask) + plat_send_ipi(cpu, SMP_MSG_FUNCTION); +} - return 0; +void arch_send_call_function_single_ipi(int cpu) +{ + plat_send_ipi(cpu, SMP_MSG_FUNCTION_SINGLE); } /* Not really SMP stuff ... */ @@ -229,7 +197,7 @@ static void flush_tlb_all_ipi(void *info) void flush_tlb_all(void) { - on_each_cpu(flush_tlb_all_ipi, 0, 1, 1); + on_each_cpu(flush_tlb_all_ipi, 0, 1); } static void flush_tlb_mm_ipi(void *mm) @@ -255,7 +223,7 @@ void flush_tlb_mm(struct mm_struct *mm) preempt_disable(); if ((atomic_read(&mm->mm_users) != 1) || (current->mm != mm)) { - smp_call_function(flush_tlb_mm_ipi, (void *)mm, 1, 1); + smp_call_function(flush_tlb_mm_ipi, (void *)mm, 1); } else { int i; for (i = 0; i < num_online_cpus(); i++) @@ -292,7 +260,7 @@ void flush_tlb_range(struct vm_area_struct *vma, fd.vma = vma; fd.addr1 = start; fd.addr2 = end; - smp_call_function(flush_tlb_range_ipi, (void *)&fd, 1, 1); + smp_call_function(flush_tlb_range_ipi, (void *)&fd, 1); } else { int i; for (i = 0; i < num_online_cpus(); i++) @@ -316,7 +284,7 @@ void flush_tlb_kernel_range(unsigned long start, unsigned long end) fd.addr1 = start; fd.addr2 = end; - on_each_cpu(flush_tlb_kernel_range_ipi, (void *)&fd, 1, 1); + on_each_cpu(flush_tlb_kernel_range_ipi, (void *)&fd, 1); } static void flush_tlb_page_ipi(void *info) @@ -335,7 +303,7 @@ void flush_tlb_page(struct vm_area_struct *vma, unsigned long page) fd.vma = vma; fd.addr1 = page; - smp_call_function(flush_tlb_page_ipi, (void *)&fd, 1, 1); + smp_call_function(flush_tlb_page_ipi, (void *)&fd, 1); } else { int i; for (i = 0; i < num_online_cpus(); i++) @@ -359,6 +327,6 @@ void flush_tlb_one(unsigned long asid, unsigned long vaddr) fd.addr1 = asid; fd.addr2 = vaddr; - smp_call_function(flush_tlb_one_ipi, (void *)&fd, 1, 1); + smp_call_function(flush_tlb_one_ipi, (void *)&fd, 1); local_flush_tlb_one(asid, vaddr); } diff --git a/arch/sh/kernel/stacktrace.c b/arch/sh/kernel/stacktrace.c index 1b2ae35c4a76..54d1f61aa007 100644 --- a/arch/sh/kernel/stacktrace.c +++ b/arch/sh/kernel/stacktrace.c @@ -12,6 +12,7 @@ #include <linux/sched.h> #include <linux/stacktrace.h> #include <linux/thread_info.h> +#include <linux/module.h> #include <asm/ptrace.h> /* diff --git a/arch/sh/kernel/sys_sh32.c b/arch/sh/kernel/sys_sh32.c index 125e493ead82..f0aa5c398656 100644 --- a/arch/sh/kernel/sys_sh32.c +++ b/arch/sh/kernel/sys_sh32.c @@ -29,7 +29,7 @@ asmlinkage int sys_pipe(unsigned long r4, unsigned long r5, int fd[2]; int error; - error = do_pipe(fd); + error = do_pipe_flags(fd, 0); if (!error) { regs->regs[1] = fd[1]; return fd[0]; diff --git a/arch/sh/kernel/syscalls_32.S b/arch/sh/kernel/syscalls_32.S index a46cc3a41148..0af693e65764 100644 --- a/arch/sh/kernel/syscalls_32.S +++ b/arch/sh/kernel/syscalls_32.S @@ -343,3 +343,9 @@ ENTRY(sys_call_table) .long sys_fallocate .long sys_timerfd_settime /* 325 */ .long sys_timerfd_gettime + .long sys_signalfd4 + .long sys_eventfd2 + .long sys_epoll_create1 + .long sys_dup3 /* 330 */ + .long sys_pipe2 + .long sys_inotify_init1 diff --git a/arch/sh/kernel/syscalls_64.S b/arch/sh/kernel/syscalls_64.S index d5d7843aad94..0b436aa3cad7 100644 --- a/arch/sh/kernel/syscalls_64.S +++ b/arch/sh/kernel/syscalls_64.S @@ -381,3 +381,9 @@ sys_call_table: .long sys_fallocate .long sys_timerfd_settime .long sys_timerfd_gettime + .long sys_signalfd4 /* 355 */ + .long sys_eventfd2 + .long sys_epoll_create1 + .long sys_dup3 + .long sys_pipe2 + .long sys_inotify_init1 /* 360 */ diff --git a/arch/sh/kernel/time_32.c b/arch/sh/kernel/time_32.c index 7281342c044d..0758b5ee8180 100644 --- a/arch/sh/kernel/time_32.c +++ b/arch/sh/kernel/time_32.c @@ -211,7 +211,7 @@ unsigned long sh_hpt_frequency = 0; #define NSEC_PER_CYC_SHIFT 10 -struct clocksource clocksource_sh = { +static struct clocksource clocksource_sh = { .name = "SuperH", .rating = 200, .mask = CLOCKSOURCE_MASK(32), diff --git a/arch/sh/kernel/time_64.c b/arch/sh/kernel/time_64.c index 022a55f1c1d4..791edabf7d83 100644 --- a/arch/sh/kernel/time_64.c +++ b/arch/sh/kernel/time_64.c @@ -33,8 +33,8 @@ #include <linux/irq.h> #include <linux/io.h> #include <linux/platform_device.h> -#include <asm/cpu/registers.h> /* required by inline __asm__ stmt. */ -#include <asm/cpu/irq.h> +#include <cpu/registers.h> /* required by inline __asm__ stmt. */ +#include <cpu/irq.h> #include <asm/addrspace.h> #include <asm/processor.h> #include <asm/uaccess.h> diff --git a/arch/sh/kernel/timers/timer-tmu.c b/arch/sh/kernel/timers/timer-tmu.c index 8935570008d2..1ca9ad49b541 100644 --- a/arch/sh/kernel/timers/timer-tmu.c +++ b/arch/sh/kernel/timers/timer-tmu.c @@ -209,7 +209,7 @@ static int tmu_timer_init(void) return 0; } -struct sys_timer_ops tmu_timer_ops = { +static struct sys_timer_ops tmu_timer_ops = { .init = tmu_timer_init, .start = tmu_timer_start, .stop = tmu_timer_stop, diff --git a/arch/sh/kernel/traps_32.c b/arch/sh/kernel/traps_32.c index e08b3bfeb656..511a9426cec5 100644 --- a/arch/sh/kernel/traps_32.c +++ b/arch/sh/kernel/traps_32.c @@ -43,6 +43,7 @@ # define TRAP_ILLEGAL_SLOT_INST 6 # define TRAP_ADDRESS_ERROR 9 # ifdef CONFIG_CPU_SH2A +# define TRAP_FPU_ERROR 13 # define TRAP_DIVZERO_ERROR 17 # define TRAP_DIVOVF_ERROR 18 # endif @@ -851,6 +852,9 @@ void __init trap_init(void) #ifdef CONFIG_CPU_SH2A set_exception_table_vec(TRAP_DIVZERO_ERROR, do_divide_error); set_exception_table_vec(TRAP_DIVOVF_ERROR, do_divide_error); +#ifdef CONFIG_SH_FPU + set_exception_table_vec(TRAP_FPU_ERROR, fpu_error_trap_handler); +#endif #endif /* Setup VBR for boot cpu */ diff --git a/arch/sh/lib/Makefile b/arch/sh/lib/Makefile index ebb55d1149f5..8596cc78e18d 100644 --- a/arch/sh/lib/Makefile +++ b/arch/sh/lib/Makefile @@ -2,9 +2,11 @@ # Makefile for SuperH-specific library files.. # -lib-y = delay.o io.o memset.o memmove.o memchr.o \ +lib-y = delay.o memset.o memmove.o memchr.o \ checksum.o strlen.o div64.o div64-generic.o +obj-y += io.o + memcpy-y := memcpy.o memcpy-$(CONFIG_CPU_SH4) := memcpy-sh4.o diff --git a/arch/sh/lib64/panic.c b/arch/sh/lib64/panic.c index ff559e2a96f7..da32ba7b5fcc 100644 --- a/arch/sh/lib64/panic.c +++ b/arch/sh/lib64/panic.c @@ -8,7 +8,7 @@ #include <linux/kernel.h> #include <asm/io.h> -#include <asm/cpu/registers.h> +#include <cpu/registers.h> /* THIS IS A PHYSICAL ADDRESS */ #define HDSP2534_ADDR (0x04002100) diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig index 5fd218430b19..9c131cac91a4 100644 --- a/arch/sh/mm/Kconfig +++ b/arch/sh/mm/Kconfig @@ -145,25 +145,39 @@ choice config PAGE_SIZE_4KB bool "4kB" - depends on !X2TLB + depends on !MMU || !X2TLB help This is the default page size used by all SuperH CPUs. config PAGE_SIZE_8KB bool "8kB" - depends on X2TLB + depends on !MMU || X2TLB help This enables 8kB pages as supported by SH-X2 and later MMUs. +config PAGE_SIZE_16KB + bool "16kB" + depends on !MMU + help + This enables 16kB pages on MMU-less SH systems. + config PAGE_SIZE_64KB bool "64kB" - depends on CPU_SH4 || CPU_SH5 + depends on !MMU || CPU_SH4 || CPU_SH5 help This enables support for 64kB pages, possible on all SH-4 CPUs and later. endchoice +config ENTRY_OFFSET + hex + default "0x00001000" if PAGE_SIZE_4KB + default "0x00002000" if PAGE_SIZE_8KB + default "0x00004000" if PAGE_SIZE_16KB + default "0x00010000" if PAGE_SIZE_64KB + default "0x00000000" + choice prompt "HugeTLB page size" depends on HUGETLB_PAGE && (CPU_SH4 || CPU_SH5) && MMU @@ -223,7 +237,6 @@ choice config CACHE_WRITEBACK bool "Write-back" - depends on CPU_SH2A || CPU_SH3 || CPU_SH4 || CPU_SH5 config CACHE_WRITETHROUGH bool "Write-through" diff --git a/arch/sh/mm/Makefile_32 b/arch/sh/mm/Makefile_32 index e295db60b91b..70e0906023cc 100644 --- a/arch/sh/mm/Makefile_32 +++ b/arch/sh/mm/Makefile_32 @@ -5,12 +5,15 @@ obj-y := init.o extable_32.o consistent.o ifndef CONFIG_CACHE_OFF -obj-$(CONFIG_CPU_SH2) += cache-sh2.o -obj-$(CONFIG_CPU_SH3) += cache-sh3.o -obj-$(CONFIG_CPU_SH4) += cache-sh4.o -obj-$(CONFIG_SH7705_CACHE_32KB) += cache-sh7705.o +cache-$(CONFIG_CPU_SH2) := cache-sh2.o +cache-$(CONFIG_CPU_SH2A) := cache-sh2a.o +cache-$(CONFIG_CPU_SH3) := cache-sh3.o +cache-$(CONFIG_CPU_SH4) := cache-sh4.o +cache-$(CONFIG_SH7705_CACHE_32KB) += cache-sh7705.o endif +obj-y += $(cache-y) + mmu-y := tlb-nommu.o pg-nommu.o mmu-$(CONFIG_MMU) := fault_32.o tlbflush_32.o ioremap_32.o diff --git a/arch/sh/mm/cache-debugfs.c b/arch/sh/mm/cache-debugfs.c index c5b56d52b7d2..0e189ccd4a77 100644 --- a/arch/sh/mm/cache-debugfs.c +++ b/arch/sh/mm/cache-debugfs.c @@ -120,7 +120,7 @@ static const struct file_operations cache_debugfs_fops = { .open = cache_debugfs_open, .read = seq_read, .llseek = seq_lseek, - .release = seq_release, + .release = single_release, }; static int __init cache_debugfs_init(void) diff --git a/arch/sh/mm/cache-sh2.c b/arch/sh/mm/cache-sh2.c index 6614033f6be9..c4e80d2b764b 100644 --- a/arch/sh/mm/cache-sh2.c +++ b/arch/sh/mm/cache-sh2.c @@ -2,6 +2,7 @@ * arch/sh/mm/cache-sh2.c * * Copyright (C) 2002 Paul Mundt + * Copyright (C) 2008 Yoshinori Sato * * Released under the terms of the GNU GPL v2.0. */ @@ -24,8 +25,15 @@ void __flush_wback_region(void *start, int size) end = ((unsigned long)start + size + L1_CACHE_BYTES-1) & ~(L1_CACHE_BYTES-1); for (v = begin; v < end; v+=L1_CACHE_BYTES) { - /* FIXME cache purge */ - ctrl_outl((v & 0x1ffffc00), (v & 0x00000ff0) | 0x00000008); + unsigned long addr = CACHE_OC_ADDRESS_ARRAY | (v & 0x00000ff0); + int way; + for (way = 0; way < 4; way++) { + unsigned long data = ctrl_inl(addr | (way << 12)); + if ((data & CACHE_PHYSADDR_MASK) == (v & CACHE_PHYSADDR_MASK)) { + data &= ~SH_CACHE_UPDATED; + ctrl_outl(data, addr | (way << 12)); + } + } } } @@ -37,21 +45,40 @@ void __flush_purge_region(void *start, int size) begin = (unsigned long)start & ~(L1_CACHE_BYTES-1); end = ((unsigned long)start + size + L1_CACHE_BYTES-1) & ~(L1_CACHE_BYTES-1); - for (v = begin; v < end; v+=L1_CACHE_BYTES) { - ctrl_outl((v & 0x1ffffc00), (v & 0x00000ff0) | 0x00000008); - } + + for (v = begin; v < end; v+=L1_CACHE_BYTES) + ctrl_outl((v & CACHE_PHYSADDR_MASK), + CACHE_OC_ADDRESS_ARRAY | (v & 0x00000ff0) | 0x00000008); } void __flush_invalidate_region(void *start, int size) { +#ifdef CONFIG_CACHE_WRITEBACK + /* + * SH-2 does not support individual line invalidation, only a + * global invalidate. + */ + unsigned long ccr; + unsigned long flags; + local_irq_save(flags); + jump_to_uncached(); + + ccr = ctrl_inl(CCR); + ccr |= CCR_CACHE_INVALIDATE; + ctrl_outl(ccr, CCR); + + back_to_cached(); + local_irq_restore(flags); +#else unsigned long v; unsigned long begin, end; begin = (unsigned long)start & ~(L1_CACHE_BYTES-1); end = ((unsigned long)start + size + L1_CACHE_BYTES-1) & ~(L1_CACHE_BYTES-1); - for (v = begin; v < end; v+=L1_CACHE_BYTES) { - ctrl_outl((v & 0x1ffffc00), (v & 0x00000ff0) | 0x00000008); - } -} + for (v = begin; v < end; v+=L1_CACHE_BYTES) + ctrl_outl((v & CACHE_PHYSADDR_MASK), + CACHE_OC_ADDRESS_ARRAY | (v & 0x00000ff0) | 0x00000008); +#endif +} diff --git a/arch/sh/mm/cache-sh2a.c b/arch/sh/mm/cache-sh2a.c new file mode 100644 index 000000000000..62c0c5f35120 --- /dev/null +++ b/arch/sh/mm/cache-sh2a.c @@ -0,0 +1,129 @@ +/* + * arch/sh/mm/cache-sh2a.c + * + * Copyright (C) 2008 Yoshinori Sato + * + * Released under the terms of the GNU GPL v2.0. + */ + +#include <linux/init.h> +#include <linux/mm.h> + +#include <asm/cache.h> +#include <asm/addrspace.h> +#include <asm/processor.h> +#include <asm/cacheflush.h> +#include <asm/io.h> + +void __flush_wback_region(void *start, int size) +{ + unsigned long v; + unsigned long begin, end; + unsigned long flags; + + begin = (unsigned long)start & ~(L1_CACHE_BYTES-1); + end = ((unsigned long)start + size + L1_CACHE_BYTES-1) + & ~(L1_CACHE_BYTES-1); + + local_irq_save(flags); + jump_to_uncached(); + + for (v = begin; v < end; v+=L1_CACHE_BYTES) { + unsigned long addr = CACHE_OC_ADDRESS_ARRAY | (v & 0x000007f0); + int way; + for (way = 0; way < 4; way++) { + unsigned long data = ctrl_inl(addr | (way << 11)); + if ((data & CACHE_PHYSADDR_MASK) == (v & CACHE_PHYSADDR_MASK)) { + data &= ~SH_CACHE_UPDATED; + ctrl_outl(data, addr | (way << 11)); + } + } + } + + back_to_cached(); + local_irq_restore(flags); +} + +void __flush_purge_region(void *start, int size) +{ + unsigned long v; + unsigned long begin, end; + unsigned long flags; + + begin = (unsigned long)start & ~(L1_CACHE_BYTES-1); + end = ((unsigned long)start + size + L1_CACHE_BYTES-1) + & ~(L1_CACHE_BYTES-1); + + local_irq_save(flags); + jump_to_uncached(); + + for (v = begin; v < end; v+=L1_CACHE_BYTES) { + ctrl_outl((v & CACHE_PHYSADDR_MASK), + CACHE_OC_ADDRESS_ARRAY | (v & 0x000003f0) | 0x00000008); + } + back_to_cached(); + local_irq_restore(flags); +} + +void __flush_invalidate_region(void *start, int size) +{ + unsigned long v; + unsigned long begin, end; + unsigned long flags; + + begin = (unsigned long)start & ~(L1_CACHE_BYTES-1); + end = ((unsigned long)start + size + L1_CACHE_BYTES-1) + & ~(L1_CACHE_BYTES-1); + local_irq_save(flags); + jump_to_uncached(); + +#ifdef CONFIG_CACHE_WRITEBACK + ctrl_outl(ctrl_inl(CCR) | CCR_OCACHE_INVALIDATE, CCR); + /* I-cache invalidate */ + for (v = begin; v < end; v+=L1_CACHE_BYTES) { + ctrl_outl((v & CACHE_PHYSADDR_MASK), + CACHE_IC_ADDRESS_ARRAY | (v & 0x000003f0) | 0x00000008); + } +#else + for (v = begin; v < end; v+=L1_CACHE_BYTES) { + ctrl_outl((v & CACHE_PHYSADDR_MASK), + CACHE_IC_ADDRESS_ARRAY | (v & 0x000003f0) | 0x00000008); + ctrl_outl((v & CACHE_PHYSADDR_MASK), + CACHE_OC_ADDRESS_ARRAY | (v & 0x000003f0) | 0x00000008); + } +#endif + back_to_cached(); + local_irq_restore(flags); +} + +/* WBack O-Cache and flush I-Cache */ +void flush_icache_range(unsigned long start, unsigned long end) +{ + unsigned long v; + unsigned long flags; + + start = start & ~(L1_CACHE_BYTES-1); + end = (end + L1_CACHE_BYTES-1) & ~(L1_CACHE_BYTES-1); + + local_irq_save(flags); + jump_to_uncached(); + + for (v = start; v < end; v+=L1_CACHE_BYTES) { + unsigned long addr = (v & 0x000007f0); + int way; + /* O-Cache writeback */ + for (way = 0; way < 4; way++) { + unsigned long data = ctrl_inl(CACHE_OC_ADDRESS_ARRAY | addr | (way << 11)); + if ((data & CACHE_PHYSADDR_MASK) == (v & CACHE_PHYSADDR_MASK)) { + data &= ~SH_CACHE_UPDATED; + ctrl_outl(data, CACHE_OC_ADDRESS_ARRAY | addr | (way << 11)); + } + } + /* I-Cache invalidate */ + ctrl_outl(addr, + CACHE_IC_ADDRESS_ARRAY | addr | 0x00000008); + } + + back_to_cached(); + local_irq_restore(flags); +} diff --git a/arch/sh/mm/cache-sh4.c b/arch/sh/mm/cache-sh4.c index 43d7ff6b6ec7..1fdc8d90254a 100644 --- a/arch/sh/mm/cache-sh4.c +++ b/arch/sh/mm/cache-sh4.c @@ -4,6 +4,7 @@ * Copyright (C) 1999, 2000, 2002 Niibe Yutaka * Copyright (C) 2001 - 2007 Paul Mundt * Copyright (C) 2003 Richard Curnow + * Copyright (c) 2007 STMicroelectronics (R&D) Ltd. * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive @@ -22,6 +23,7 @@ * entirety. */ #define MAX_DCACHE_PAGES 64 /* XXX: Tune for ways */ +#define MAX_ICACHE_PAGES 32 static void __flush_dcache_segment_1way(unsigned long start, unsigned long extent); @@ -178,42 +180,45 @@ void __flush_invalidate_region(void *start, int size) /* * Write back the range of D-cache, and purge the I-cache. * - * Called from kernel/module.c:sys_init_module and routine for a.out format. + * Called from kernel/module.c:sys_init_module and routine for a.out format, + * signal handler code and kprobes code */ void flush_icache_range(unsigned long start, unsigned long end) { - flush_cache_all(); -} - -/* - * Write back the D-cache and purge the I-cache for signal trampoline. - * .. which happens to be the same behavior as flush_icache_range(). - * So, we simply flush out a line. - */ -void __uses_jump_to_uncached flush_cache_sigtramp(unsigned long addr) -{ - unsigned long v, index; - unsigned long flags; + int icacheaddr; + unsigned long flags, v; int i; - v = addr & ~(L1_CACHE_BYTES-1); - asm volatile("ocbwb %0" - : /* no output */ - : "m" (__m(v))); - - index = CACHE_IC_ADDRESS_ARRAY | - (v & boot_cpu_data.icache.entry_mask); - - local_irq_save(flags); - jump_to_uncached(); - - for (i = 0; i < boot_cpu_data.icache.ways; - i++, index += boot_cpu_data.icache.way_incr) - ctrl_outl(0, index); /* Clear out Valid-bit */ - - back_to_cached(); - wmb(); - local_irq_restore(flags); + /* If there are too many pages then just blow the caches */ + if (((end - start) >> PAGE_SHIFT) >= MAX_ICACHE_PAGES) { + flush_cache_all(); + } else { + /* selectively flush d-cache then invalidate the i-cache */ + /* this is inefficient, so only use for small ranges */ + start &= ~(L1_CACHE_BYTES-1); + end += L1_CACHE_BYTES-1; + end &= ~(L1_CACHE_BYTES-1); + + local_irq_save(flags); + jump_to_uncached(); + + for (v = start; v < end; v+=L1_CACHE_BYTES) { + asm volatile("ocbwb %0" + : /* no output */ + : "m" (__m(v))); + + icacheaddr = CACHE_IC_ADDRESS_ARRAY | ( + v & cpu_data->icache.entry_mask); + + for (i = 0; i < cpu_data->icache.ways; + i++, icacheaddr += cpu_data->icache.way_incr) + /* Clear i-cache line valid-bit */ + ctrl_outl(0, icacheaddr); + } + + back_to_cached(); + local_irq_restore(flags); + } } static inline void flush_cache_4096(unsigned long start, diff --git a/arch/sh/mm/consistent.c b/arch/sh/mm/consistent.c index d3c33fc5b1c2..b2ce014401b5 100644 --- a/arch/sh/mm/consistent.c +++ b/arch/sh/mm/consistent.c @@ -10,6 +10,7 @@ * for more details. */ #include <linux/mm.h> +#include <linux/platform_device.h> #include <linux/dma-mapping.h> #include <asm/cacheflush.h> #include <asm/addrspace.h> @@ -27,21 +28,10 @@ void *dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle, gfp_t gfp) { void *ret, *ret_nocache; - struct dma_coherent_mem *mem = dev ? dev->dma_mem : NULL; int order = get_order(size); - if (mem) { - int page = bitmap_find_free_region(mem->bitmap, mem->size, - order); - if (page >= 0) { - *dma_handle = mem->device_base + (page << PAGE_SHIFT); - ret = mem->virt_base + (page << PAGE_SHIFT); - memset(ret, 0, size); - return ret; - } - if (mem->flags & DMA_MEMORY_EXCLUSIVE) - return NULL; - } + if (dma_alloc_from_coherent(dev, size, dma_handle, &ret)) + return ret; ret = (void *)__get_free_pages(gfp, order); if (!ret) @@ -71,11 +61,7 @@ void dma_free_coherent(struct device *dev, size_t size, struct dma_coherent_mem *mem = dev ? dev->dma_mem : NULL; int order = get_order(size); - if (mem && vaddr >= mem->virt_base && vaddr < (mem->virt_base + (mem->size << PAGE_SHIFT))) { - int page = (vaddr - mem->virt_base) >> PAGE_SHIFT; - - bitmap_release_region(mem->bitmap, page, order); - } else { + if (!dma_release_from_coherent(dev, order, vaddr)) { WARN_ON(irqs_disabled()); /* for portability */ BUG_ON(mem && mem->flags & DMA_MEMORY_EXCLUSIVE); free_pages((unsigned long)phys_to_virt(dma_handle), order); @@ -84,83 +70,6 @@ void dma_free_coherent(struct device *dev, size_t size, } EXPORT_SYMBOL(dma_free_coherent); -int dma_declare_coherent_memory(struct device *dev, dma_addr_t bus_addr, - dma_addr_t device_addr, size_t size, int flags) -{ - void __iomem *mem_base = NULL; - int pages = size >> PAGE_SHIFT; - int bitmap_size = BITS_TO_LONGS(pages) * sizeof(long); - - if ((flags & (DMA_MEMORY_MAP | DMA_MEMORY_IO)) == 0) - goto out; - if (!size) - goto out; - if (dev->dma_mem) - goto out; - - /* FIXME: this routine just ignores DMA_MEMORY_INCLUDES_CHILDREN */ - - mem_base = ioremap_nocache(bus_addr, size); - if (!mem_base) - goto out; - - dev->dma_mem = kmalloc(sizeof(struct dma_coherent_mem), GFP_KERNEL); - if (!dev->dma_mem) - goto out; - dev->dma_mem->bitmap = kzalloc(bitmap_size, GFP_KERNEL); - if (!dev->dma_mem->bitmap) - goto free1_out; - - dev->dma_mem->virt_base = mem_base; - dev->dma_mem->device_base = device_addr; - dev->dma_mem->size = pages; - dev->dma_mem->flags = flags; - - if (flags & DMA_MEMORY_MAP) - return DMA_MEMORY_MAP; - - return DMA_MEMORY_IO; - - free1_out: - kfree(dev->dma_mem); - out: - if (mem_base) - iounmap(mem_base); - return 0; -} -EXPORT_SYMBOL(dma_declare_coherent_memory); - -void dma_release_declared_memory(struct device *dev) -{ - struct dma_coherent_mem *mem = dev->dma_mem; - - if (!mem) - return; - dev->dma_mem = NULL; - iounmap(mem->virt_base); - kfree(mem->bitmap); - kfree(mem); -} -EXPORT_SYMBOL(dma_release_declared_memory); - -void *dma_mark_declared_memory_occupied(struct device *dev, - dma_addr_t device_addr, size_t size) -{ - struct dma_coherent_mem *mem = dev->dma_mem; - int pages = (size + (device_addr & ~PAGE_MASK) + PAGE_SIZE - 1) >> PAGE_SHIFT; - int pos, err; - - if (!mem) - return ERR_PTR(-EINVAL); - - pos = (device_addr - mem->device_base) >> PAGE_SHIFT; - err = bitmap_allocate_region(mem->bitmap, pos, get_order(pages)); - if (err != 0) - return ERR_PTR(err); - return mem->virt_base + (pos << PAGE_SHIFT); -} -EXPORT_SYMBOL(dma_mark_declared_memory_occupied); - void dma_cache_sync(struct device *dev, void *vaddr, size_t size, enum dma_data_direction direction) { @@ -185,3 +94,32 @@ void dma_cache_sync(struct device *dev, void *vaddr, size_t size, } } EXPORT_SYMBOL(dma_cache_sync); + +int platform_resource_setup_memory(struct platform_device *pdev, + char *name, unsigned long memsize) +{ + struct resource *r; + dma_addr_t dma_handle; + void *buf; + + r = pdev->resource + pdev->num_resources - 1; + if (r->flags) { + pr_warning("%s: unable to find empty space for resource\n", + name); + return -EINVAL; + } + + buf = dma_alloc_coherent(NULL, memsize, &dma_handle, GFP_KERNEL); + if (!buf) { + pr_warning("%s: unable to allocate memory\n", name); + return -ENOMEM; + } + + memset(buf, 0, memsize); + + r->flags = IORESOURCE_MEM; + r->start = dma_handle; + r->end = r->start + memsize - 1; + r->name = name; + return 0; +} diff --git a/arch/sh/mm/fault_32.c b/arch/sh/mm/fault_32.c index d1fa27594c6e..0c776fdfbdda 100644 --- a/arch/sh/mm/fault_32.c +++ b/arch/sh/mm/fault_32.c @@ -37,16 +37,12 @@ asmlinkage void __kprobes do_page_fault(struct pt_regs *regs, int fault; siginfo_t info; - trace_hardirqs_on(); - local_irq_enable(); - #ifdef CONFIG_SH_KGDB if (kgdb_nofault && kgdb_bus_err_hook) kgdb_bus_err_hook(); #endif tsk = current; - mm = tsk->mm; si_code = SEGV_MAPERR; if (unlikely(address >= TASK_SIZE)) { @@ -88,6 +84,14 @@ asmlinkage void __kprobes do_page_fault(struct pt_regs *regs, return; } + /* Only enable interrupts if they were on before the fault */ + if ((regs->sr & SR_IMASK) != SR_IMASK) { + trace_hardirqs_on(); + local_irq_enable(); + } + + mm = tsk->mm; + /* * If we're in an interrupt or have no user * context, we must not take the fault.. diff --git a/arch/sh/mm/fault_64.c b/arch/sh/mm/fault_64.c index 399d53710d2f..bd63b961b2a9 100644 --- a/arch/sh/mm/fault_64.c +++ b/arch/sh/mm/fault_64.c @@ -39,7 +39,7 @@ #include <asm/uaccess.h> #include <asm/pgalloc.h> #include <asm/mmu_context.h> -#include <asm/cpu/registers.h> +#include <cpu/registers.h> /* Callable from fault.c, so not static */ inline void __do_tlb_refill(unsigned long address, diff --git a/arch/sh/mm/hugetlbpage.c b/arch/sh/mm/hugetlbpage.c index ae8c321d6e2a..9304117039c4 100644 --- a/arch/sh/mm/hugetlbpage.c +++ b/arch/sh/mm/hugetlbpage.c @@ -22,7 +22,8 @@ #include <asm/tlbflush.h> #include <asm/cacheflush.h> -pte_t *huge_pte_alloc(struct mm_struct *mm, unsigned long addr) +pte_t *huge_pte_alloc(struct mm_struct *mm, + unsigned long addr, unsigned long sz) { pgd_t *pgd; pud_t *pud; @@ -78,6 +79,11 @@ int pmd_huge(pmd_t pmd) return 0; } +int pud_huge(pud_t pud) +{ + return 0; +} + struct page *follow_huge_pmd(struct mm_struct *mm, unsigned long address, pmd_t *pmd, int write) { diff --git a/arch/sh/mm/init.c b/arch/sh/mm/init.c index d7df26bd1e54..b75a7acd62fb 100644 --- a/arch/sh/mm/init.c +++ b/arch/sh/mm/init.c @@ -25,47 +25,6 @@ DEFINE_PER_CPU(struct mmu_gather, mmu_gathers); pgd_t swapper_pg_dir[PTRS_PER_PGD]; unsigned long cached_to_uncached = 0; -void show_mem(void) -{ - int total = 0, reserved = 0, free = 0; - int shared = 0, cached = 0, slab = 0; - pg_data_t *pgdat; - - printk("Mem-info:\n"); - show_free_areas(); - - for_each_online_pgdat(pgdat) { - unsigned long flags, i; - - pgdat_resize_lock(pgdat, &flags); - for (i = 0; i < pgdat->node_spanned_pages; i++) { - struct page *page = pgdat_page_nr(pgdat, i); - total++; - if (PageReserved(page)) - reserved++; - else if (PageSwapCache(page)) - cached++; - else if (PageSlab(page)) - slab++; - else if (!page_count(page)) - free++; - else - shared += page_count(page) - 1; - } - pgdat_resize_unlock(pgdat, &flags); - } - - printk("Free swap: %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10)); - printk("%d pages of RAM\n", total); - printk("%d free pages\n", free); - printk("%d reserved pages\n", reserved); - printk("%d slab pages\n", slab); - printk("%d pages shared\n", shared); - printk("%d pages swap cached\n", cached); - printk(KERN_INFO "Total of %ld pages in page table cache\n", - quicklist_total_size()); -} - #ifdef CONFIG_MMU static void set_pte_phys(unsigned long addr, unsigned long phys, pgprot_t prot) { @@ -191,7 +150,7 @@ void __init paging_init(void) pg_data_t *pgdat = NODE_DATA(nid); unsigned long low, start_pfn; - start_pfn = pgdat->bdata->node_boot_start >> PAGE_SHIFT; + start_pfn = pgdat->bdata->node_min_pfn; low = pgdat->bdata->node_low_pfn; if (max_zone_pfns[ZONE_NORMAL] < low) diff --git a/arch/sh/mm/numa.c b/arch/sh/mm/numa.c index 1663199ce888..095d93bec7cd 100644 --- a/arch/sh/mm/numa.c +++ b/arch/sh/mm/numa.c @@ -14,7 +14,6 @@ #include <linux/pfn.h> #include <asm/sections.h> -static bootmem_data_t plat_node_bdata[MAX_NUMNODES]; struct pglist_data *node_data[MAX_NUMNODES] __read_mostly; EXPORT_SYMBOL_GPL(node_data); @@ -35,7 +34,7 @@ void __init setup_memory(void) NODE_DATA(0) = pfn_to_kaddr(free_pfn); memset(NODE_DATA(0), 0, sizeof(struct pglist_data)); free_pfn += PFN_UP(sizeof(struct pglist_data)); - NODE_DATA(0)->bdata = &plat_node_bdata[0]; + NODE_DATA(0)->bdata = &bootmem_node_data[0]; /* Set up node 0 */ setup_bootmem_allocator(free_pfn); @@ -66,7 +65,7 @@ void __init setup_bootmem_node(int nid, unsigned long start, unsigned long end) free_pfn += PFN_UP(sizeof(struct pglist_data)); memset(NODE_DATA(nid), 0, sizeof(struct pglist_data)); - NODE_DATA(nid)->bdata = &plat_node_bdata[nid]; + NODE_DATA(nid)->bdata = &bootmem_node_data[nid]; NODE_DATA(nid)->node_start_pfn = start_pfn; NODE_DATA(nid)->node_spanned_pages = end_pfn - start_pfn; diff --git a/arch/sh/mm/pg-sh4.c b/arch/sh/mm/pg-sh4.c index 8c7a9ca79879..38870e0fc182 100644 --- a/arch/sh/mm/pg-sh4.c +++ b/arch/sh/mm/pg-sh4.c @@ -111,7 +111,7 @@ EXPORT_SYMBOL(copy_user_highpage); /* * For SH-4, we have our own implementation for ptep_get_and_clear */ -inline pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep) +pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep) { pte_t pte = *ptep; diff --git a/arch/sh/mm/pg-sh7705.c b/arch/sh/mm/pg-sh7705.c index 7f885b7f8aff..eaf25147194c 100644 --- a/arch/sh/mm/pg-sh7705.c +++ b/arch/sh/mm/pg-sh7705.c @@ -118,7 +118,7 @@ void copy_user_page(void *to, void *from, unsigned long address, struct page *pg * For SH7705, we have our own implementation for ptep_get_and_clear * Copied from pg-sh4.c */ -inline pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep) +pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep) { pte_t pte = *ptep; diff --git a/arch/sh/mm/pmb.c b/arch/sh/mm/pmb.c index 0b0ec6e04753..cef727669c87 100644 --- a/arch/sh/mm/pmb.c +++ b/arch/sh/mm/pmb.c @@ -293,7 +293,7 @@ void pmb_unmap(unsigned long addr) } while (pmbe); } -static void pmb_cache_ctor(struct kmem_cache *cachep, void *pmb) +static void pmb_cache_ctor(void *pmb) { struct pmb_entry *pmbe = pmb; @@ -385,7 +385,7 @@ static const struct file_operations pmb_debugfs_fops = { .open = pmb_debugfs_open, .read = seq_read, .llseek = seq_lseek, - .release = seq_release, + .release = single_release, }; static int __init pmb_debugfs_init(void) diff --git a/arch/sh/mm/tlb-sh5.c b/arch/sh/mm/tlb-sh5.c index f34274a1ded3..dae131243bcc 100644 --- a/arch/sh/mm/tlb-sh5.c +++ b/arch/sh/mm/tlb-sh5.c @@ -15,9 +15,7 @@ #include <asm/mmu_context.h> /** - * sh64_tlb_init - * - * Perform initial setup for the DTLB and ITLB. + * sh64_tlb_init - Perform initial setup for the DTLB and ITLB. */ int __init sh64_tlb_init(void) { @@ -46,9 +44,7 @@ int __init sh64_tlb_init(void) } /** - * sh64_next_free_dtlb_entry - * - * Find the next available DTLB entry + * sh64_next_free_dtlb_entry - Find the next available DTLB entry */ unsigned long long sh64_next_free_dtlb_entry(void) { @@ -56,9 +52,7 @@ unsigned long long sh64_next_free_dtlb_entry(void) } /** - * sh64_get_wired_dtlb_entry - * - * Allocate a wired (locked-in) entry in the DTLB + * sh64_get_wired_dtlb_entry - Allocate a wired (locked-in) entry in the DTLB */ unsigned long long sh64_get_wired_dtlb_entry(void) { @@ -71,12 +65,10 @@ unsigned long long sh64_get_wired_dtlb_entry(void) } /** - * sh64_put_wired_dtlb_entry + * sh64_put_wired_dtlb_entry - Free a wired (locked-in) entry in the DTLB. * * @entry: Address of TLB slot. * - * Free a wired (locked-in) entry in the DTLB. - * * Works like a stack, last one to allocate must be first one to free. */ int sh64_put_wired_dtlb_entry(unsigned long long entry) @@ -115,7 +107,7 @@ int sh64_put_wired_dtlb_entry(unsigned long long entry) } /** - * sh64_setup_tlb_slot + * sh64_setup_tlb_slot - Load up a translation in a wired slot. * * @config_addr: Address of TLB slot. * @eaddr: Virtual address. @@ -154,7 +146,7 @@ inline void sh64_setup_tlb_slot(unsigned long long config_addr, } /** - * sh64_teardown_tlb_slot + * sh64_teardown_tlb_slot - Teardown a translation. * * @config_addr: Address of TLB slot. * diff --git a/arch/sh/tools/mach-types b/arch/sh/tools/mach-types index 1bba7d36be90..0a11cc08f0a5 100644 --- a/arch/sh/tools/mach-types +++ b/arch/sh/tools/mach-types @@ -46,3 +46,7 @@ R2D_1 RTS7751R2D_1 CAYMAN SH_CAYMAN SDK7780 SH_SDK7780 MIGOR SH_MIGOR +RSK7203 SH_RSK7203 +AP325RXA SH_AP325RXA +SH7763RDP SH_SH7763RDP +SH7785LCR SH_SH7785LCR |