summaryrefslogtreecommitdiffstats
path: root/arch/sh64/kernel/pci_sh5.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/sh64/kernel/pci_sh5.c')
-rw-r--r--arch/sh64/kernel/pci_sh5.c536
1 files changed, 0 insertions, 536 deletions
diff --git a/arch/sh64/kernel/pci_sh5.c b/arch/sh64/kernel/pci_sh5.c
deleted file mode 100644
index b4d9534d2b0e..000000000000
--- a/arch/sh64/kernel/pci_sh5.c
+++ /dev/null
@@ -1,536 +0,0 @@
-/*
- * Copyright (C) 2001 David J. Mckay (david.mckay@st.com)
- * Copyright (C) 2003, 2004 Paul Mundt
- * Copyright (C) 2004 Richard Curnow
- *
- * May be copied or modified under the terms of the GNU General Public
- * License. See linux/COPYING for more information.
- *
- * Support functions for the SH5 PCI hardware.
- */
-
-#include <linux/kernel.h>
-#include <linux/rwsem.h>
-#include <linux/smp.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include <linux/types.h>
-#include <asm/pci.h>
-#include <linux/irq.h>
-
-#include <asm/io.h>
-#include <asm/hardware.h>
-#include "pci_sh5.h"
-
-static unsigned long pcicr_virt;
-unsigned long pciio_virt;
-
-static void __init pci_fixup_ide_bases(struct pci_dev *d)
-{
- int i;
-
- /*
- * PCI IDE controllers use non-standard I/O port decoding, respect it.
- */
- if ((d->class >> 8) != PCI_CLASS_STORAGE_IDE)
- return;
- printk("PCI: IDE base address fixup for %s\n", pci_name(d));
- for(i=0; i<4; i++) {
- struct resource *r = &d->resource[i];
- if ((r->start & ~0x80) == 0x374) {
- r->start |= 2;
- r->end = r->start;
- }
- }
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_ide_bases);
-
-char * __devinit pcibios_setup(char *str)
-{
- return str;
-}
-
-/* Rounds a number UP to the nearest power of two. Used for
- * sizing the PCI window.
- */
-static u32 __init r2p2(u32 num)
-{
- int i = 31;
- u32 tmp = num;
-
- if (num == 0)
- return 0;
-
- do {
- if (tmp & (1 << 31))
- break;
- i--;
- tmp <<= 1;
- } while (i >= 0);
-
- tmp = 1 << i;
- /* If the original number isn't a power of 2, round it up */
- if (tmp != num)
- tmp <<= 1;
-
- return tmp;
-}
-
-extern unsigned long long memory_start, memory_end;
-
-int __init sh5pci_init(unsigned memStart, unsigned memSize)
-{
- u32 lsr0;
- u32 uval;
-
- pcicr_virt = onchip_remap(SH5PCI_ICR_BASE, 1024, "PCICR");
- if (!pcicr_virt) {
- panic("Unable to remap PCICR\n");
- }
-
- pciio_virt = onchip_remap(SH5PCI_IO_BASE, 0x10000, "PCIIO");
- if (!pciio_virt) {
- panic("Unable to remap PCIIO\n");
- }
-
- pr_debug("Register base addres is 0x%08lx\n", pcicr_virt);
-
- /* Clear snoop registers */
- SH5PCI_WRITE(CSCR0, 0);
- SH5PCI_WRITE(CSCR1, 0);
-
- pr_debug("Wrote to reg\n");
-
- /* Switch off interrupts */
- SH5PCI_WRITE(INTM, 0);
- SH5PCI_WRITE(AINTM, 0);
- SH5PCI_WRITE(PINTM, 0);
-
- /* Set bus active, take it out of reset */
- uval = SH5PCI_READ(CR);
-
- /* Set command Register */
- SH5PCI_WRITE(CR, uval | CR_LOCK_MASK | CR_CFINT| CR_FTO | CR_PFE | CR_PFCS | CR_BMAM);
-
- uval=SH5PCI_READ(CR);
- pr_debug("CR is actually 0x%08x\n",uval);
-
- /* Allow it to be a master */
- /* NB - WE DISABLE I/O ACCESS to stop overlap */
- /* set WAIT bit to enable stepping, an attempt to improve stability */
- SH5PCI_WRITE_SHORT(CSR_CMD,
- PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | PCI_COMMAND_WAIT);
-
- /*
- ** Set translation mapping memory in order to convert the address
- ** used for the main bus, to the PCI internal address.
- */
- SH5PCI_WRITE(MBR,0x40000000);
-
- /* Always set the max size 512M */
- SH5PCI_WRITE(MBMR, PCISH5_MEM_SIZCONV(512*1024*1024));
-
- /*
- ** I/O addresses are mapped at internal PCI specific address
- ** as is described into the configuration bridge table.
- ** These are changed to 0, to allow cards that have legacy
- ** io such as vga to function correctly. We set the SH5 IOBAR to
- ** 256K, which is a bit big as we can only have 64K of address space
- */
-
- SH5PCI_WRITE(IOBR,0x0);
-
- pr_debug("PCI:Writing 0x%08x to IOBR\n",0);
-
- /* Set up a 256K window. Totally pointless waste of address space */
- SH5PCI_WRITE(IOBMR,0);
- pr_debug("PCI:Writing 0x%08x to IOBMR\n",0);
-
- /* The SH5 has a HUGE 256K I/O region, which breaks the PCI spec. Ideally,
- * we would want to map the I/O region somewhere, but it is so big this is not
- * that easy!
- */
- SH5PCI_WRITE(CSR_IBAR0,~0);
- /* Set memory size value */
- memSize = memory_end - memory_start;
-
- /* Now we set up the mbars so the PCI bus can see the memory of the machine */
- if (memSize < (1024 * 1024)) {
- printk(KERN_ERR "PCISH5: Ridiculous memory size of 0x%x?\n", memSize);
- return -EINVAL;
- }
-
- /* Set LSR 0 */
- lsr0 = (memSize > (512 * 1024 * 1024)) ? 0x1ff00001 : ((r2p2(memSize) - 0x100000) | 0x1);
- SH5PCI_WRITE(LSR0, lsr0);
-
- pr_debug("PCI:Writing 0x%08x to LSR0\n",lsr0);
-
- /* Set MBAR 0 */
- SH5PCI_WRITE(CSR_MBAR0, memory_start);
- SH5PCI_WRITE(LAR0, memory_start);
-
- SH5PCI_WRITE(CSR_MBAR1,0);
- SH5PCI_WRITE(LAR1,0);
- SH5PCI_WRITE(LSR1,0);
-
- pr_debug("PCI:Writing 0x%08llx to CSR_MBAR0\n",memory_start);
- pr_debug("PCI:Writing 0x%08llx to LAR0\n",memory_start);
-
- /* Enable the PCI interrupts on the device */
- SH5PCI_WRITE(INTM, ~0);
- SH5PCI_WRITE(AINTM, ~0);
- SH5PCI_WRITE(PINTM, ~0);
-
- pr_debug("Switching on all error interrupts\n");
-
- return(0);
-}
-
-static int sh5pci_read(struct pci_bus *bus, unsigned int devfn, int where,
- int size, u32 *val)
-{
- SH5PCI_WRITE(PAR, CONFIG_CMD(bus, devfn, where));
-
- switch (size) {
- case 1:
- *val = (u8)SH5PCI_READ_BYTE(PDR + (where & 3));
- break;
- case 2:
- *val = (u16)SH5PCI_READ_SHORT(PDR + (where & 2));
- break;
- case 4:
- *val = SH5PCI_READ(PDR);
- break;
- }
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-static int sh5pci_write(struct pci_bus *bus, unsigned int devfn, int where,
- int size, u32 val)
-{
- SH5PCI_WRITE(PAR, CONFIG_CMD(bus, devfn, where));
-
- switch (size) {
- case 1:
- SH5PCI_WRITE_BYTE(PDR + (where & 3), (u8)val);
- break;
- case 2:
- SH5PCI_WRITE_SHORT(PDR + (where & 2), (u16)val);
- break;
- case 4:
- SH5PCI_WRITE(PDR, val);
- break;
- }
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-static struct pci_ops pci_config_ops = {
- .read = sh5pci_read,
- .write = sh5pci_write,
-};
-
-/* Everything hangs off this */
-static struct pci_bus *pci_root_bus;
-
-
-static u8 __init no_swizzle(struct pci_dev *dev, u8 * pin)
-{
- pr_debug("swizzle for dev %d on bus %d slot %d pin is %d\n",
- dev->devfn,dev->bus->number, PCI_SLOT(dev->devfn),*pin);
- return PCI_SLOT(dev->devfn);
-}
-
-static inline u8 bridge_swizzle(u8 pin, u8 slot)
-{
- return (((pin-1) + slot) % 4) + 1;
-}
-
-u8 __init common_swizzle(struct pci_dev *dev, u8 *pinp)
-{
- if (dev->bus->number != 0) {
- u8 pin = *pinp;
- do {
- pin = bridge_swizzle(pin, PCI_SLOT(dev->devfn));
- /* Move up the chain of bridges. */
- dev = dev->bus->self;
- } while (dev->bus->self);
- *pinp = pin;
-
- /* The slot is the slot of the last bridge. */
- }
-
- return PCI_SLOT(dev->devfn);
-}
-
-/* This needs to be shunted out of here into the board specific bit */
-
-static int __init map_cayman_irq(struct pci_dev *dev, u8 slot, u8 pin)
-{
- int result = -1;
-
- /* The complication here is that the PCI IRQ lines from the Cayman's 2
- 5V slots get into the CPU via a different path from the IRQ lines
- from the 3 3.3V slots. Thus, we have to detect whether the card's
- interrupts go via the 5V or 3.3V path, i.e. the 'bridge swizzling'
- at the point where we cross from 5V to 3.3V is not the normal case.
-
- The added complication is that we don't know that the 5V slots are
- always bus 2, because a card containing a PCI-PCI bridge may be
- plugged into a 3.3V slot, and this changes the bus numbering.
-
- Also, the Cayman has an intermediate PCI bus that goes a custom
- expansion board header (and to the secondary bridge). This bus has
- never been used in practice.
-
- The 1ary onboard PCI-PCI bridge is device 3 on bus 0
- The 2ary onboard PCI-PCI bridge is device 0 on the 2ary bus of the 1ary bridge.
- */
-
- struct slot_pin {
- int slot;
- int pin;
- } path[4];
- int i=0;
-
- while (dev->bus->number > 0) {
-
- slot = path[i].slot = PCI_SLOT(dev->devfn);
- pin = path[i].pin = bridge_swizzle(pin, slot);
- dev = dev->bus->self;
- i++;
- if (i > 3) panic("PCI path to root bus too long!\n");
- }
-
- slot = PCI_SLOT(dev->devfn);
- /* This is the slot on bus 0 through which the device is eventually
- reachable. */
-
- /* Now work back up. */
- if ((slot < 3) || (i == 0)) {
- /* Bus 0 (incl. PCI-PCI bridge itself) : perform the final
- swizzle now. */
- result = IRQ_INTA + bridge_swizzle(pin, slot) - 1;
- } else {
- i--;
- slot = path[i].slot;
- pin = path[i].pin;
- if (slot > 0) {
- panic("PCI expansion bus device found - not handled!\n");
- } else {
- if (i > 0) {
- /* 5V slots */
- i--;
- slot = path[i].slot;
- pin = path[i].pin;
- /* 'pin' was swizzled earlier wrt slot, don't do it again. */
- result = IRQ_P2INTA + (pin - 1);
- } else {
- /* IRQ for 2ary PCI-PCI bridge : unused */
- result = -1;
- }
- }
- }
-
- return result;
-}
-
-static irqreturn_t pcish5_err_irq(int irq, void *dev_id)
-{
- struct pt_regs *regs = get_irq_regs();
- unsigned pci_int, pci_air, pci_cir, pci_aint;
-
- pci_int = SH5PCI_READ(INT);
- pci_cir = SH5PCI_READ(CIR);
- pci_air = SH5PCI_READ(AIR);
-
- if (pci_int) {
- printk("PCI INTERRUPT (at %08llx)!\n", regs->pc);
- printk("PCI INT -> 0x%x\n", pci_int & 0xffff);
- printk("PCI AIR -> 0x%x\n", pci_air);
- printk("PCI CIR -> 0x%x\n", pci_cir);
- SH5PCI_WRITE(INT, ~0);
- }
-
- pci_aint = SH5PCI_READ(AINT);
- if (pci_aint) {
- printk("PCI ARB INTERRUPT!\n");
- printk("PCI AINT -> 0x%x\n", pci_aint);
- printk("PCI AIR -> 0x%x\n", pci_air);
- printk("PCI CIR -> 0x%x\n", pci_cir);
- SH5PCI_WRITE(AINT, ~0);
- }
-
- return IRQ_HANDLED;
-}
-
-static irqreturn_t pcish5_serr_irq(int irq, void *dev_id)
-{
- printk("SERR IRQ\n");
-
- return IRQ_NONE;
-}
-
-static void __init
-pcibios_size_bridge(struct pci_bus *bus, struct resource *ior,
- struct resource *memr)
-{
- struct resource io_res, mem_res;
- struct pci_dev *dev;
- struct pci_dev *bridge = bus->self;
- struct list_head *ln;
-
- if (!bridge)
- return; /* host bridge, nothing to do */
-
- /* set reasonable default locations for pcibios_align_resource */
- io_res.start = PCIBIOS_MIN_IO;
- mem_res.start = PCIBIOS_MIN_MEM;
-
- io_res.end = io_res.start;
- mem_res.end = mem_res.start;
-
- /* Collect information about how our direct children are layed out. */
- for (ln=bus->devices.next; ln != &bus->devices; ln=ln->next) {
- int i;
- dev = pci_dev_b(ln);
-
- /* Skip bridges for now */
- if (dev->class >> 8 == PCI_CLASS_BRIDGE_PCI)
- continue;
-
- for (i = 0; i < PCI_NUM_RESOURCES; i++) {
- struct resource res;
- unsigned long size;
-
- memcpy(&res, &dev->resource[i], sizeof(res));
- size = res.end - res.start + 1;
-
- if (res.flags & IORESOURCE_IO) {
- res.start = io_res.end;
- pcibios_align_resource(dev, &res, size, 0);
- io_res.end = res.start + size;
- } else if (res.flags & IORESOURCE_MEM) {
- res.start = mem_res.end;
- pcibios_align_resource(dev, &res, size, 0);
- mem_res.end = res.start + size;
- }
- }
- }
-
- /* And for all of the subordinate busses. */
- for (ln=bus->children.next; ln != &bus->children; ln=ln->next)
- pcibios_size_bridge(pci_bus_b(ln), &io_res, &mem_res);
-
- /* turn the ending locations into sizes (subtract start) */
- io_res.end -= io_res.start;
- mem_res.end -= mem_res.start;
-
- /* Align the sizes up by bridge rules */
- io_res.end = ALIGN(io_res.end, 4*1024) - 1;
- mem_res.end = ALIGN(mem_res.end, 1*1024*1024) - 1;
-
- /* Adjust the bridge's allocation requirements */
- bridge->resource[0].end = bridge->resource[0].start + io_res.end;
- bridge->resource[1].end = bridge->resource[1].start + mem_res.end;
-
- bridge->resource[PCI_BRIDGE_RESOURCES].end =
- bridge->resource[PCI_BRIDGE_RESOURCES].start + io_res.end;
- bridge->resource[PCI_BRIDGE_RESOURCES+1].end =
- bridge->resource[PCI_BRIDGE_RESOURCES+1].start + mem_res.end;
-
- /* adjust parent's resource requirements */
- if (ior) {
- ior->end = ALIGN(ior->end, 4*1024);
- ior->end += io_res.end;
- }
-
- if (memr) {
- memr->end = ALIGN(memr->end, 1*1024*1024);
- memr->end += mem_res.end;
- }
-}
-
-static void __init pcibios_size_bridges(void)
-{
- struct resource io_res, mem_res;
-
- memset(&io_res, 0, sizeof(io_res));
- memset(&mem_res, 0, sizeof(mem_res));
-
- pcibios_size_bridge(pci_root_bus, &io_res, &mem_res);
-}
-
-static int __init pcibios_init(void)
-{
- if (request_irq(IRQ_ERR, pcish5_err_irq,
- IRQF_DISABLED, "PCI Error",NULL) < 0) {
- printk(KERN_ERR "PCISH5: Cannot hook PCI_PERR interrupt\n");
- return -EINVAL;
- }
-
- if (request_irq(IRQ_SERR, pcish5_serr_irq,
- IRQF_DISABLED, "PCI SERR interrupt", NULL) < 0) {
- printk(KERN_ERR "PCISH5: Cannot hook PCI_SERR interrupt\n");
- return -EINVAL;
- }
-
- /* The pci subsystem needs to know where memory is and how much
- * of it there is. I've simply made these globals. A better mechanism
- * is probably needed.
- */
- sh5pci_init(__pa(memory_start),
- __pa(memory_end) - __pa(memory_start));
-
- pci_root_bus = pci_scan_bus(0, &pci_config_ops, NULL);
- pcibios_size_bridges();
- pci_assign_unassigned_resources();
- pci_fixup_irqs(no_swizzle, map_cayman_irq);
-
- return 0;
-}
-
-subsys_initcall(pcibios_init);
-
-void __devinit pcibios_fixup_bus(struct pci_bus *bus)
-{
- struct pci_dev *dev = bus->self;
- int i;
-
-#if 1
- if(dev) {
- for(i=0; i<3; i++) {
- bus->resource[i] =
- &dev->resource[PCI_BRIDGE_RESOURCES+i];
- bus->resource[i]->name = bus->name;
- }
- bus->resource[0]->flags |= IORESOURCE_IO;
- bus->resource[1]->flags |= IORESOURCE_MEM;
-
- /* For now, propagate host limits to the bus;
- * we'll adjust them later. */
-
-#if 1
- bus->resource[0]->end = 64*1024 - 1 ;
- bus->resource[1]->end = PCIBIOS_MIN_MEM+(256*1024*1024)-1;
- bus->resource[0]->start = PCIBIOS_MIN_IO;
- bus->resource[1]->start = PCIBIOS_MIN_MEM;
-#else
- bus->resource[0]->end = 0;
- bus->resource[1]->end = 0;
- bus->resource[0]->start =0;
- bus->resource[1]->start = 0;
-#endif
- /* Turn off downstream PF memory address range by default */
- bus->resource[2]->start = 1024*1024;
- bus->resource[2]->end = bus->resource[2]->start - 1;
- }
-#endif
-
-}
-
OpenPOWER on IntegriCloud