diff options
Diffstat (limited to 'arch/sh/boards')
49 files changed, 359 insertions, 359 deletions
diff --git a/arch/sh/boards/board-magicpanelr2.c b/arch/sh/boards/board-magicpanelr2.c index 99ffc5f1c0dd..efba450a0518 100644 --- a/arch/sh/boards/board-magicpanelr2.c +++ b/arch/sh/boards/board-magicpanelr2.c @@ -23,7 +23,7 @@ #include <asm/heartbeat.h> #include <cpu/sh7720.h> -#define LAN9115_READY (ctrl_inl(0xA8000084UL) & 0x00000001UL) +#define LAN9115_READY (__raw_readl(0xA8000084UL) & 0x00000001UL) /* Prefer cmdline over RedBoot */ static const char *probes[] = { "cmdlinepart", "RedBoot", NULL }; @@ -60,33 +60,33 @@ static void __init setup_chip_select(void) { /* CS2: LAN (0x08000000 - 0x0bffffff) */ /* no idle cycles, normal space, 8 bit data bus */ - ctrl_outl(0x36db0400, CS2BCR); + __raw_writel(0x36db0400, CS2BCR); /* (SW:1.5 WR:3 HW:1.5), ext. wait */ - ctrl_outl(0x000003c0, CS2WCR); + __raw_writel(0x000003c0, CS2WCR); /* CS4: CAN1 (0xb0000000 - 0xb3ffffff) */ /* no idle cycles, normal space, 8 bit data bus */ - ctrl_outl(0x00000200, CS4BCR); + __raw_writel(0x00000200, CS4BCR); /* (SW:1.5 WR:3 HW:1.5), ext. wait */ - ctrl_outl(0x00100981, CS4WCR); + __raw_writel(0x00100981, CS4WCR); /* CS5a: CAN2 (0xb4000000 - 0xb5ffffff) */ /* no idle cycles, normal space, 8 bit data bus */ - ctrl_outl(0x00000200, CS5ABCR); + __raw_writel(0x00000200, CS5ABCR); /* (SW:1.5 WR:3 HW:1.5), ext. wait */ - ctrl_outl(0x00100981, CS5AWCR); + __raw_writel(0x00100981, CS5AWCR); /* CS5b: CAN3 (0xb6000000 - 0xb7ffffff) */ /* no idle cycles, normal space, 8 bit data bus */ - ctrl_outl(0x00000200, CS5BBCR); + __raw_writel(0x00000200, CS5BBCR); /* (SW:1.5 WR:3 HW:1.5), ext. wait */ - ctrl_outl(0x00100981, CS5BWCR); + __raw_writel(0x00100981, CS5BWCR); /* CS6a: Rotary (0xb8000000 - 0xb9ffffff) */ /* no idle cycles, normal space, 8 bit data bus */ - ctrl_outl(0x00000200, CS6ABCR); + __raw_writel(0x00000200, CS6ABCR); /* (SW:1.5 WR:3 HW:1.5), no ext. wait */ - ctrl_outl(0x001009C1, CS6AWCR); + __raw_writel(0x001009C1, CS6AWCR); } static void __init setup_port_multiplexing(void) @@ -94,71 +94,71 @@ static void __init setup_port_multiplexing(void) /* A7 GPO(LED8); A6 GPO(LED7); A5 GPO(LED6); A4 GPO(LED5); * A3 GPO(LED4); A2 GPO(LED3); A1 GPO(LED2); A0 GPO(LED1); */ - ctrl_outw(0x5555, PORT_PACR); /* 01 01 01 01 01 01 01 01 */ + __raw_writew(0x5555, PORT_PACR); /* 01 01 01 01 01 01 01 01 */ /* B7 GPO(RST4); B6 GPO(RST3); B5 GPO(RST2); B4 GPO(RST1); * B3 GPO(PB3); B2 GPO(PB2); B1 GPO(PB1); B0 GPO(PB0); */ - ctrl_outw(0x5555, PORT_PBCR); /* 01 01 01 01 01 01 01 01 */ + __raw_writew(0x5555, PORT_PBCR); /* 01 01 01 01 01 01 01 01 */ /* C7 GPO(PC7); C6 GPO(PC6); C5 GPO(PC5); C4 GPO(PC4); * C3 LCD_DATA3; C2 LCD_DATA2; C1 LCD_DATA1; C0 LCD_DATA0; */ - ctrl_outw(0x5500, PORT_PCCR); /* 01 01 01 01 00 00 00 00 */ + __raw_writew(0x5500, PORT_PCCR); /* 01 01 01 01 00 00 00 00 */ /* D7 GPO(PD7); D6 GPO(PD6); D5 GPO(PD5); D4 GPO(PD4); * D3 GPO(PD3); D2 GPO(PD2); D1 GPO(PD1); D0 GPO(PD0); */ - ctrl_outw(0x5555, PORT_PDCR); /* 01 01 01 01 01 01 01 01 */ + __raw_writew(0x5555, PORT_PDCR); /* 01 01 01 01 01 01 01 01 */ /* E7 (x); E6 GPI(nu); E5 GPI(nu); E4 LCD_M_DISP; * E3 LCD_CL1; E2 LCD_CL2; E1 LCD_DON; E0 LCD_FLM; */ - ctrl_outw(0x3C00, PORT_PECR); /* 00 11 11 00 00 00 00 00 */ + __raw_writew(0x3C00, PORT_PECR); /* 00 11 11 00 00 00 00 00 */ /* F7 (x); F6 DA1(VLCD); F5 DA0(nc); F4 AN3; * F3 AN2(MID_AD); F2 AN1(EARTH_AD); F1 AN0(TEMP); F0 GPI+(nc); */ - ctrl_outw(0x0002, PORT_PFCR); /* 00 00 00 00 00 00 00 10 */ + __raw_writew(0x0002, PORT_PFCR); /* 00 00 00 00 00 00 00 10 */ /* G7 (x); G6 IRQ5(TOUCH_BUSY); G5 IRQ4(TOUCH_IRQ); G4 GPI(KEY2); * G3 GPI(KEY1); G2 GPO(LED11); G1 GPO(LED10); G0 GPO(LED9); */ - ctrl_outw(0x03D5, PORT_PGCR); /* 00 00 00 11 11 01 01 01 */ + __raw_writew(0x03D5, PORT_PGCR); /* 00 00 00 11 11 01 01 01 */ /* H7 (x); H6 /RAS(BRAS); H5 /CAS(BCAS); H4 CKE(BCKE); * H3 GPO(EARTH_OFF); H2 GPO(EARTH_TEST); H1 USB2_PWR; H0 USB1_PWR; */ - ctrl_outw(0x0050, PORT_PHCR); /* 00 00 00 00 01 01 00 00 */ + __raw_writew(0x0050, PORT_PHCR); /* 00 00 00 00 01 01 00 00 */ /* J7 (x); J6 AUDCK; J5 ASEBRKAK; J4 AUDATA3; * J3 AUDATA2; J2 AUDATA1; J1 AUDATA0; J0 AUDSYNC; */ - ctrl_outw(0x0000, PORT_PJCR); /* 00 00 00 00 00 00 00 00 */ + __raw_writew(0x0000, PORT_PJCR); /* 00 00 00 00 00 00 00 00 */ /* K7 (x); K6 (x); K5 (x); K4 (x); * K3 PINT7(/PWR2); K2 PINT6(/PWR1); K1 PINT5(nu); K0 PINT4(FLASH_READY) */ - ctrl_outw(0x00FF, PORT_PKCR); /* 00 00 00 00 11 11 11 11 */ + __raw_writew(0x00FF, PORT_PKCR); /* 00 00 00 00 11 11 11 11 */ /* L7 TRST; L6 TMS; L5 TDO; L4 TDI; * L3 TCK; L2 (x); L1 (x); L0 (x); */ - ctrl_outw(0x0000, PORT_PLCR); /* 00 00 00 00 00 00 00 00 */ + __raw_writew(0x0000, PORT_PLCR); /* 00 00 00 00 00 00 00 00 */ /* M7 GPO(CURRENT_SINK); M6 GPO(PWR_SWITCH); M5 GPO(LAN_SPEED); * M4 GPO(LAN_RESET); M3 GPO(BUZZER); M2 GPO(LCD_BL); * M1 CS5B(CAN3_CS); M0 GPI+(nc); */ - ctrl_outw(0x5552, PORT_PMCR); /* 01 01 01 01 01 01 00 10 */ + __raw_writew(0x5552, PORT_PMCR); /* 01 01 01 01 01 01 00 10 */ /* CURRENT_SINK=off, PWR_SWITCH=off, LAN_SPEED=100MBit, * LAN_RESET=off, BUZZER=off, LCD_BL=off */ #if CONFIG_SH_MAGIC_PANEL_R2_VERSION == 2 - ctrl_outb(0x30, PORT_PMDR); + __raw_writeb(0x30, PORT_PMDR); #elif CONFIG_SH_MAGIC_PANEL_R2_VERSION == 3 - ctrl_outb(0xF0, PORT_PMDR); + __raw_writeb(0xF0, PORT_PMDR); #else #error Unknown revision of PLATFORM_MP_R2 #endif @@ -167,8 +167,8 @@ static void __init setup_port_multiplexing(void) * P4 GPO(nu); P3 IRQ3(LAN_IRQ); P2 IRQ2(CAN3_IRQ); * P1 IRQ1(CAN2_IRQ); P0 IRQ0(CAN1_IRQ) */ - ctrl_outw(0x0100, PORT_PPCR); /* 00 00 00 01 00 00 00 00 */ - ctrl_outb(0x10, PORT_PPDR); + __raw_writew(0x0100, PORT_PPCR); /* 00 00 00 01 00 00 00 00 */ + __raw_writeb(0x10, PORT_PPDR); /* R7 A25; R6 A24; R5 A23; R4 A22; * R3 A21; R2 A20; R1 A19; R0 A0; @@ -185,22 +185,22 @@ static void __init setup_port_multiplexing(void) /* S7 (x); S6 (x); S5 (x); S4 GPO(EEPROM_CS2); * S3 GPO(EEPROM_CS1); S2 SIOF0_TXD; S1 SIOF0_RXD; S0 SIOF0_SCK; */ - ctrl_outw(0x0140, PORT_PSCR); /* 00 00 00 01 01 00 00 00 */ + __raw_writew(0x0140, PORT_PSCR); /* 00 00 00 01 01 00 00 00 */ /* T7 (x); T6 (x); T5 (x); T4 COM1_CTS; * T3 COM1_RTS; T2 COM1_TXD; T1 COM1_RXD; T0 GPO(WDOG) */ - ctrl_outw(0x0001, PORT_PTCR); /* 00 00 00 00 00 00 00 01 */ + __raw_writew(0x0001, PORT_PTCR); /* 00 00 00 00 00 00 00 01 */ /* U7 (x); U6 (x); U5 (x); U4 GPI+(/AC_FAULT); * U3 GPO(TOUCH_CS); U2 TOUCH_TXD; U1 TOUCH_RXD; U0 TOUCH_SCK; */ - ctrl_outw(0x0240, PORT_PUCR); /* 00 00 00 10 01 00 00 00 */ + __raw_writew(0x0240, PORT_PUCR); /* 00 00 00 10 01 00 00 00 */ /* V7 (x); V6 (x); V5 (x); V4 GPO(MID2); * V3 GPO(MID1); V2 CARD_TxD; V1 CARD_RxD; V0 GPI+(/BAT_FAULT); */ - ctrl_outw(0x0142, PORT_PVCR); /* 00 00 00 01 01 00 00 10 */ + __raw_writew(0x0142, PORT_PVCR); /* 00 00 00 01 01 00 00 10 */ } static void __init mpr2_setup(char **cmdline_p) @@ -209,24 +209,24 @@ static void __init mpr2_setup(char **cmdline_p) * /PCC_CD1, /PCC_CD2, PCC_BVD1, PCC_BVD2, * /IOIS16, IRQ4, IRQ5, USB1d_SUSPEND */ - ctrl_outw(0xAABC, PORT_PSELA); + __raw_writew(0xAABC, PORT_PSELA); /* set Pin Select Register B: * /SCIF0_RTS, /SCIF0_CTS, LCD_VCPWC, * LCD_VEPWC, IIC_SDA, IIC_SCL, Reserved */ - ctrl_outw(0x3C00, PORT_PSELB); + __raw_writew(0x3C00, PORT_PSELB); /* set Pin Select Register C: * SIOF1_SCK, SIOF1_RxD, SCIF1_RxD, SCIF1_TxD, Reserved */ - ctrl_outw(0x0000, PORT_PSELC); + __raw_writew(0x0000, PORT_PSELC); /* set Pin Select Register D: Reserved, SIOF1_TxD, Reserved, SIOF1_MCLK, * Reserved, SIOF1_SYNC, Reserved, SCIF1_SCK, Reserved */ - ctrl_outw(0x0000, PORT_PSELD); + __raw_writew(0x0000, PORT_PSELD); /* set USB TxRx Control: Reserved, DRV, Reserved, USB_TRANS, USB_SEL */ - ctrl_outw(0x0101, PORT_UTRCTL); + __raw_writew(0x0101, PORT_UTRCTL); /* set USB Clock Control: USSCS, USSTB, Reserved (HighByte always A5) */ - ctrl_outw(0xA5C0, PORT_UCLKCR_W); + __raw_writew(0xA5C0, PORT_UCLKCR_W); setup_chip_select(); diff --git a/arch/sh/boards/board-polaris.c b/arch/sh/boards/board-polaris.c index 5bc126900ce3..594866356c24 100644 --- a/arch/sh/boards/board-polaris.c +++ b/arch/sh/boards/board-polaris.c @@ -89,15 +89,15 @@ static int __init polaris_initialise(void) printk(KERN_INFO "Configuring Polaris external bus\n"); /* Configure area 5 with 2 wait states */ - wcr = ctrl_inw(WCR2); + wcr = __raw_readw(WCR2); wcr &= (~AREA5_WAIT_CTRL); wcr |= (WAIT_STATES_10 << 10); - ctrl_outw(wcr, WCR2); + __raw_writew(wcr, WCR2); /* Configure area 5 for 32-bit access */ - bcr_mask = ctrl_inw(BCR2); + bcr_mask = __raw_readw(BCR2); bcr_mask |= 1 << 10; - ctrl_outw(bcr_mask, BCR2); + __raw_writew(bcr_mask, BCR2); return platform_add_devices(polaris_devices, ARRAY_SIZE(polaris_devices)); @@ -128,13 +128,13 @@ static struct ipr_desc ipr_irq_desc = { static void __init init_polaris_irq(void) { /* Disable all interrupts */ - ctrl_outw(0, BCR_ILCRA); - ctrl_outw(0, BCR_ILCRB); - ctrl_outw(0, BCR_ILCRC); - ctrl_outw(0, BCR_ILCRD); - ctrl_outw(0, BCR_ILCRE); - ctrl_outw(0, BCR_ILCRF); - ctrl_outw(0, BCR_ILCRG); + __raw_writew(0, BCR_ILCRA); + __raw_writew(0, BCR_ILCRB); + __raw_writew(0, BCR_ILCRC); + __raw_writew(0, BCR_ILCRD); + __raw_writew(0, BCR_ILCRE); + __raw_writew(0, BCR_ILCRF); + __raw_writew(0, BCR_ILCRG); register_ipr_controller(&ipr_irq_desc); } diff --git a/arch/sh/boards/board-shmin.c b/arch/sh/boards/board-shmin.c index b1dcbbc89188..325bed53b87e 100644 --- a/arch/sh/boards/board-shmin.c +++ b/arch/sh/boards/board-shmin.c @@ -17,8 +17,8 @@ static void __init init_shmin_irq(void) { - ctrl_outw(0x2a00, PFC_PHCR); // IRQ0-3=IRQ - ctrl_outw(0x0aaa, INTC_ICR1); // IRQ0-3=IRQ-mode,Low-active. + __raw_writew(0x2a00, PFC_PHCR); // IRQ0-3=IRQ + __raw_writew(0x0aaa, INTC_ICR1); // IRQ0-3=IRQ-mode,Low-active. plat_irq_setup_pins(IRQ_MODE_IRQ); } diff --git a/arch/sh/boards/mach-ap325rxa/setup.c b/arch/sh/boards/mach-ap325rxa/setup.c index 1f5fa5c44f6d..27277cbdb636 100644 --- a/arch/sh/boards/mach-ap325rxa/setup.c +++ b/arch/sh/boards/mach-ap325rxa/setup.c @@ -159,21 +159,21 @@ static void ap320_wvga_power_on(void *board_data) msleep(100); /* ASD AP-320/325 LCD ON */ - ctrl_outw(FPGA_LCDREG_VAL, FPGA_LCDREG); + __raw_writew(FPGA_LCDREG_VAL, FPGA_LCDREG); /* backlight */ gpio_set_value(GPIO_PTS3, 0); - ctrl_outw(0x100, FPGA_BKLREG); + __raw_writew(0x100, FPGA_BKLREG); } static void ap320_wvga_power_off(void *board_data) { /* backlight */ - ctrl_outw(0, FPGA_BKLREG); + __raw_writew(0, FPGA_BKLREG); gpio_set_value(GPIO_PTS3, 1); /* ASD AP-320/325 LCD OFF */ - ctrl_outw(0, FPGA_LCDREG); + __raw_writew(0, FPGA_LCDREG); } static struct sh_mobile_lcdc_info lcdc_info = { @@ -595,7 +595,7 @@ static int __init ap325rxa_devices_setup(void) gpio_request(GPIO_PTZ4, NULL); gpio_direction_output(GPIO_PTZ4, 0); /* SADDR */ - ctrl_outw(ctrl_inw(PORT_MSELCRB) & ~0x0001, PORT_MSELCRB); + __raw_writew(__raw_readw(PORT_MSELCRB) & ~0x0001, PORT_MSELCRB); /* FLCTL */ gpio_request(GPIO_FN_FCE, NULL); @@ -613,9 +613,9 @@ static int __init ap325rxa_devices_setup(void) gpio_request(GPIO_FN_FWE, NULL); gpio_request(GPIO_FN_FRB, NULL); - ctrl_outw(0, PORT_HIZCRC); - ctrl_outw(0xFFFF, PORT_DRVCRA); - ctrl_outw(0xFFFF, PORT_DRVCRB); + __raw_writew(0, PORT_HIZCRC); + __raw_writew(0xFFFF, PORT_DRVCRA); + __raw_writew(0xFFFF, PORT_DRVCRB); platform_resource_setup_memory(&ceu_device, "ceu", 4 << 20); diff --git a/arch/sh/boards/mach-cayman/irq.c b/arch/sh/boards/mach-cayman/irq.c index 33f770856319..1394b078db36 100644 --- a/arch/sh/boards/mach-cayman/irq.c +++ b/arch/sh/boards/mach-cayman/irq.c @@ -66,9 +66,9 @@ static void enable_cayman_irq(unsigned int irq) reg = EPLD_MASK_BASE + ((irq / 8) << 2); bit = 1<<(irq % 8); local_irq_save(flags); - mask = ctrl_inl(reg); + mask = __raw_readl(reg); mask |= bit; - ctrl_outl(mask, reg); + __raw_writel(mask, reg); local_irq_restore(flags); } @@ -83,9 +83,9 @@ void disable_cayman_irq(unsigned int irq) reg = EPLD_MASK_BASE + ((irq / 8) << 2); bit = 1<<(irq % 8); local_irq_save(flags); - mask = ctrl_inl(reg); + mask = __raw_readl(reg); mask &= ~bit; - ctrl_outl(mask, reg); + __raw_writel(mask, reg); local_irq_restore(flags); } @@ -109,8 +109,8 @@ int cayman_irq_demux(int evt) unsigned long status; int i; - status = ctrl_inl(EPLD_STATUS_BASE) & - ctrl_inl(EPLD_MASK_BASE) & 0xff; + status = __raw_readl(EPLD_STATUS_BASE) & + __raw_readl(EPLD_MASK_BASE) & 0xff; if (status == 0) { irq = -1; } else { @@ -126,8 +126,8 @@ int cayman_irq_demux(int evt) unsigned long status; int i; - status = ctrl_inl(EPLD_STATUS_BASE + 3 * sizeof(u32)) & - ctrl_inl(EPLD_MASK_BASE + 3 * sizeof(u32)) & 0xff; + status = __raw_readl(EPLD_STATUS_BASE + 3 * sizeof(u32)) & + __raw_readl(EPLD_MASK_BASE + 3 * sizeof(u32)) & 0xff; if (status == 0) { irq = -1; } else { diff --git a/arch/sh/boards/mach-dreamcast/rtc.c b/arch/sh/boards/mach-dreamcast/rtc.c index a7433685798d..061d65714fcc 100644 --- a/arch/sh/boards/mach-dreamcast/rtc.c +++ b/arch/sh/boards/mach-dreamcast/rtc.c @@ -35,11 +35,11 @@ static void aica_rtc_gettimeofday(struct timespec *ts) unsigned long val1, val2; do { - val1 = ((ctrl_inl(AICA_RTC_SECS_H) & 0xffff) << 16) | - (ctrl_inl(AICA_RTC_SECS_L) & 0xffff); + val1 = ((__raw_readl(AICA_RTC_SECS_H) & 0xffff) << 16) | + (__raw_readl(AICA_RTC_SECS_L) & 0xffff); - val2 = ((ctrl_inl(AICA_RTC_SECS_H) & 0xffff) << 16) | - (ctrl_inl(AICA_RTC_SECS_L) & 0xffff); + val2 = ((__raw_readl(AICA_RTC_SECS_H) & 0xffff) << 16) | + (__raw_readl(AICA_RTC_SECS_L) & 0xffff); } while (val1 != val2); ts->tv_sec = val1 - TWENTY_YEARS; @@ -60,14 +60,14 @@ static int aica_rtc_settimeofday(const time_t secs) unsigned long adj = secs + TWENTY_YEARS; do { - ctrl_outl((adj & 0xffff0000) >> 16, AICA_RTC_SECS_H); - ctrl_outl((adj & 0xffff), AICA_RTC_SECS_L); + __raw_writel((adj & 0xffff0000) >> 16, AICA_RTC_SECS_H); + __raw_writel((adj & 0xffff), AICA_RTC_SECS_L); - val1 = ((ctrl_inl(AICA_RTC_SECS_H) & 0xffff) << 16) | - (ctrl_inl(AICA_RTC_SECS_L) & 0xffff); + val1 = ((__raw_readl(AICA_RTC_SECS_H) & 0xffff) << 16) | + (__raw_readl(AICA_RTC_SECS_L) & 0xffff); - val2 = ((ctrl_inl(AICA_RTC_SECS_H) & 0xffff) << 16) | - (ctrl_inl(AICA_RTC_SECS_L) & 0xffff); + val2 = ((__raw_readl(AICA_RTC_SECS_H) & 0xffff) << 16) | + (__raw_readl(AICA_RTC_SECS_L) & 0xffff); } while (val1 != val2); return 0; diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c index a49cce16e783..1135c3b848f2 100644 --- a/arch/sh/boards/mach-ecovec24/setup.c +++ b/arch/sh/boards/mach-ecovec24/setup.c @@ -696,13 +696,13 @@ static struct platform_device camera_devices[] = { #define FCLKBCR 0xa415000c static void fsimck_init(struct clk *clk) { - u32 status = ctrl_inl(clk->enable_reg); + u32 status = __raw_readl(clk->enable_reg); /* use external clock */ status &= ~0x000000ff; status |= 0x00000080; - ctrl_outl(status, clk->enable_reg); + __raw_writel(status, clk->enable_reg); } static struct clk_ops fsimck_clk_ops = { @@ -853,7 +853,7 @@ static int __init arch_setup(void) gpio_direction_output(GPIO_PTG1, 0); gpio_direction_output(GPIO_PTG2, 0); gpio_direction_output(GPIO_PTG3, 0); - ctrl_outw((ctrl_inw(PORT_HIZA) & ~(0x1 << 1)) , PORT_HIZA); + __raw_writew((__raw_readw(PORT_HIZA) & ~(0x1 << 1)) , PORT_HIZA); /* enable SH-Eth */ gpio_request(GPIO_PTA1, NULL); @@ -873,16 +873,16 @@ static int __init arch_setup(void) gpio_request(GPIO_FN_LNKSTA, NULL); /* enable USB */ - ctrl_outw(0x0000, 0xA4D80000); - ctrl_outw(0x0000, 0xA4D90000); + __raw_writew(0x0000, 0xA4D80000); + __raw_writew(0x0000, 0xA4D90000); gpio_request(GPIO_PTB3, NULL); gpio_request(GPIO_PTB4, NULL); gpio_request(GPIO_PTB5, NULL); gpio_direction_input(GPIO_PTB3); gpio_direction_output(GPIO_PTB4, 0); gpio_direction_output(GPIO_PTB5, 0); - ctrl_outw(0x0600, 0xa40501d4); - ctrl_outw(0x0600, 0xa4050192); + __raw_writew(0x0600, 0xa40501d4); + __raw_writew(0x0600, 0xa4050192); if (gpio_get_value(GPIO_PTB3)) { printk(KERN_INFO "USB1 function is selected\n"); @@ -923,7 +923,7 @@ static int __init arch_setup(void) gpio_request(GPIO_FN_LCDVSYN, NULL); gpio_request(GPIO_FN_LCDDON, NULL); gpio_request(GPIO_FN_LCDLCLK, NULL); - ctrl_outw((ctrl_inw(PORT_HIZA) & ~0x0001), PORT_HIZA); + __raw_writew((__raw_readw(PORT_HIZA) & ~0x0001), PORT_HIZA); gpio_request(GPIO_PTE6, NULL); gpio_request(GPIO_PTU1, NULL); @@ -935,7 +935,7 @@ static int __init arch_setup(void) gpio_direction_output(GPIO_PTA2, 0); /* I/O buffer drive ability is high */ - ctrl_outw((ctrl_inw(IODRIVEA) & ~0x00c0) | 0x0080 , IODRIVEA); + __raw_writew((__raw_readw(IODRIVEA) & ~0x00c0) | 0x0080 , IODRIVEA); if (gpio_get_value(GPIO_PTE6)) { /* DVI */ @@ -1067,7 +1067,7 @@ static int __init arch_setup(void) gpio_direction_output(GPIO_PTB7, 0); /* I/O buffer drive ability is high for SDHI1 */ - ctrl_outw((ctrl_inw(IODRIVEA) & ~0x3000) | 0x2000 , IODRIVEA); + __raw_writew((__raw_readw(IODRIVEA) & ~0x3000) | 0x2000 , IODRIVEA); #else /* enable MSIOF0 on CN11 (needs DS2.4 set to OFF) */ gpio_request(GPIO_FN_MSIOF0_TXD, NULL); diff --git a/arch/sh/boards/mach-highlander/irq-r7780mp.c b/arch/sh/boards/mach-highlander/irq-r7780mp.c index 83c28bcd4d2a..9893fd3a1358 100644 --- a/arch/sh/boards/mach-highlander/irq-r7780mp.c +++ b/arch/sh/boards/mach-highlander/irq-r7780mp.c @@ -64,7 +64,7 @@ static DECLARE_INTC_DESC(intc_desc, "r7780mp", vectors, unsigned char * __init highlander_plat_irq_setup(void) { - if ((ctrl_inw(0xa4000700) & 0xf000) == 0x2000) { + if ((__raw_readw(0xa4000700) & 0xf000) == 0x2000) { printk(KERN_INFO "Using r7780mp interrupt controller.\n"); register_intc_controller(&intc_desc); return irl2irq; diff --git a/arch/sh/boards/mach-highlander/irq-r7780rp.c b/arch/sh/boards/mach-highlander/irq-r7780rp.c index b721e86b5af4..0805b2151452 100644 --- a/arch/sh/boards/mach-highlander/irq-r7780rp.c +++ b/arch/sh/boards/mach-highlander/irq-r7780rp.c @@ -57,7 +57,7 @@ static DECLARE_INTC_DESC(intc_desc, "r7780rp", vectors, unsigned char * __init highlander_plat_irq_setup(void) { - if (ctrl_inw(0xa5000600)) { + if (__raw_readw(0xa5000600)) { printk(KERN_INFO "Using r7780rp interrupt controller.\n"); register_intc_controller(&intc_desc); return irl2irq; diff --git a/arch/sh/boards/mach-highlander/irq-r7785rp.c b/arch/sh/boards/mach-highlander/irq-r7785rp.c index 3811b060a39b..558b24862776 100644 --- a/arch/sh/boards/mach-highlander/irq-r7785rp.c +++ b/arch/sh/boards/mach-highlander/irq-r7785rp.c @@ -66,20 +66,20 @@ static DECLARE_INTC_DESC(intc_desc, "r7785rp", vectors, unsigned char * __init highlander_plat_irq_setup(void) { - if ((ctrl_inw(0xa4000158) & 0xf000) != 0x1000) + if ((__raw_readw(0xa4000158) & 0xf000) != 0x1000) return NULL; printk(KERN_INFO "Using r7785rp interrupt controller.\n"); - ctrl_outw(0x0000, PA_IRLSSR1); /* FPGA IRLSSR1(CF_CD clear) */ + __raw_writew(0x0000, PA_IRLSSR1); /* FPGA IRLSSR1(CF_CD clear) */ /* Setup the FPGA IRL */ - ctrl_outw(0x0000, PA_IRLPRA); /* FPGA IRLA */ - ctrl_outw(0xe598, PA_IRLPRB); /* FPGA IRLB */ - ctrl_outw(0x7060, PA_IRLPRC); /* FPGA IRLC */ - ctrl_outw(0x0000, PA_IRLPRD); /* FPGA IRLD */ - ctrl_outw(0x4321, PA_IRLPRE); /* FPGA IRLE */ - ctrl_outw(0xdcba, PA_IRLPRF); /* FPGA IRLF */ + __raw_writew(0x0000, PA_IRLPRA); /* FPGA IRLA */ + __raw_writew(0xe598, PA_IRLPRB); /* FPGA IRLB */ + __raw_writew(0x7060, PA_IRLPRC); /* FPGA IRLC */ + __raw_writew(0x0000, PA_IRLPRD); /* FPGA IRLD */ + __raw_writew(0x4321, PA_IRLPRE); /* FPGA IRLE */ + __raw_writew(0xdcba, PA_IRLPRF); /* FPGA IRLF */ register_intc_controller(&intc_desc); return irl2irq; diff --git a/arch/sh/boards/mach-highlander/psw.c b/arch/sh/boards/mach-highlander/psw.c index 37b1a2ee71a5..522786318d36 100644 --- a/arch/sh/boards/mach-highlander/psw.c +++ b/arch/sh/boards/mach-highlander/psw.c @@ -24,7 +24,7 @@ static irqreturn_t psw_irq_handler(int irq, void *arg) unsigned int l, mask; int ret = 0; - l = ctrl_inw(PA_DBSW); + l = __raw_readw(PA_DBSW); /* Nothing to do if there's no state change */ if (psw->state) { @@ -45,7 +45,7 @@ static irqreturn_t psw_irq_handler(int irq, void *arg) out: /* Clear the switch IRQs */ l |= (0x7 << 12); - ctrl_outw(l, PA_DBSW); + __raw_writew(l, PA_DBSW); return IRQ_RETVAL(ret); } diff --git a/arch/sh/boards/mach-highlander/setup.c b/arch/sh/boards/mach-highlander/setup.c index f663c14d8885..affd66747ba3 100644 --- a/arch/sh/boards/mach-highlander/setup.c +++ b/arch/sh/boards/mach-highlander/setup.c @@ -311,13 +311,13 @@ device_initcall(r7780rp_devices_setup); */ static int ivdr_clk_enable(struct clk *clk) { - ctrl_outw(ctrl_inw(PA_IVDRCTL) | (1 << IVDR_CK_ON), PA_IVDRCTL); + __raw_writew(__raw_readw(PA_IVDRCTL) | (1 << IVDR_CK_ON), PA_IVDRCTL); return 0; } static void ivdr_clk_disable(struct clk *clk) { - ctrl_outw(ctrl_inw(PA_IVDRCTL) & ~(1 << IVDR_CK_ON), PA_IVDRCTL); + __raw_writew(__raw_readw(PA_IVDRCTL) & ~(1 << IVDR_CK_ON), PA_IVDRCTL); } static struct clk_ops ivdr_clk_ops = { @@ -337,7 +337,7 @@ static struct clk *r7780rp_clocks[] = { static void r7780rp_power_off(void) { if (mach_is_r7780mp() || mach_is_r7785rp()) - ctrl_outw(0x0001, PA_POFF); + __raw_writew(0x0001, PA_POFF); } /* @@ -345,7 +345,7 @@ static void r7780rp_power_off(void) */ static void __init highlander_setup(char **cmdline_p) { - u16 ver = ctrl_inw(PA_VERREG); + u16 ver = __raw_readw(PA_VERREG); int i; printk(KERN_INFO "Renesas Solutions Highlander %s support.\n", @@ -370,12 +370,12 @@ static void __init highlander_setup(char **cmdline_p) clk_enable(clk); } - ctrl_outw(0x0000, PA_OBLED); /* Clear LED. */ + __raw_writew(0x0000, PA_OBLED); /* Clear LED. */ if (mach_is_r7780rp()) - ctrl_outw(0x0001, PA_SDPOW); /* SD Power ON */ + __raw_writew(0x0001, PA_SDPOW); /* SD Power ON */ - ctrl_outw(ctrl_inw(PA_IVDRCTL) | 0x01, PA_IVDRCTL); /* Si13112 */ + __raw_writew(__raw_readw(PA_IVDRCTL) | 0x01, PA_IVDRCTL); /* Si13112 */ pm_power_off = r7780rp_power_off; } diff --git a/arch/sh/boards/mach-hp6xx/hp6xx_apm.c b/arch/sh/boards/mach-hp6xx/hp6xx_apm.c index e85212faf40a..b49535c0ddd9 100644 --- a/arch/sh/boards/mach-hp6xx/hp6xx_apm.c +++ b/arch/sh/boards/mach-hp6xx/hp6xx_apm.c @@ -53,7 +53,7 @@ static void hp6x0_apm_get_power_status(struct apm_power_info *info) info->ac_line_status = (battery > HP680_BATTERY_AC_ON) ? APM_AC_ONLINE : APM_AC_OFFLINE; - pgdr = ctrl_inb(PGDR); + pgdr = __raw_readb(PGDR); if (pgdr & PGDR_MAIN_BATTERY_OUT) { info->battery_status = APM_BATTERY_STATUS_NOT_PRESENT; info->battery_flag = 0x80; diff --git a/arch/sh/boards/mach-hp6xx/pm.c b/arch/sh/boards/mach-hp6xx/pm.c index d936c1af7620..4499a3749d40 100644 --- a/arch/sh/boards/mach-hp6xx/pm.c +++ b/arch/sh/boards/mach-hp6xx/pm.c @@ -53,17 +53,17 @@ static void pm_enter(void) sh_wdt_write_cnt(0); /* disable PLL1 */ - frqcr = ctrl_inw(FRQCR); + frqcr = __raw_readw(FRQCR); frqcr &= ~(FRQCR_PLLEN | FRQCR_PSTBY); - ctrl_outw(frqcr, FRQCR); + __raw_writew(frqcr, FRQCR); /* enable standby */ - stbcr = ctrl_inb(STBCR); - ctrl_outb(stbcr | STBCR_STBY | STBCR_MSTP2, STBCR); + stbcr = __raw_readb(STBCR); + __raw_writeb(stbcr | STBCR_STBY | STBCR_MSTP2, STBCR); /* set self-refresh */ - mcr = ctrl_inw(MCR); - ctrl_outw(mcr & ~MCR_RFSH, MCR); + mcr = __raw_readw(MCR); + __raw_writew(mcr & ~MCR_RFSH, MCR); /* set interrupt handler */ asm volatile("stc vbr, %0" : "=r" (vbr_old)); @@ -73,8 +73,8 @@ static void pm_enter(void) &wakeup_start, &wakeup_end - &wakeup_start); asm volatile("ldc %0, vbr" : : "r" (vbr_new)); - ctrl_outw(0, RTCNT); - ctrl_outw(mcr | MCR_RFSH | MCR_RMODE, MCR); + __raw_writew(0, RTCNT); + __raw_writew(mcr | MCR_RFSH | MCR_RMODE, MCR); cpu_sleep(); @@ -83,14 +83,14 @@ static void pm_enter(void) free_page(vbr_new); /* enable PLL1 */ - frqcr = ctrl_inw(FRQCR); + frqcr = __raw_readw(FRQCR); frqcr |= FRQCR_PSTBY; - ctrl_outw(frqcr, FRQCR); + __raw_writew(frqcr, FRQCR); udelay(50); frqcr |= FRQCR_PLLEN; - ctrl_outw(frqcr, FRQCR); + __raw_writew(frqcr, FRQCR); - ctrl_outb(stbcr, STBCR); + __raw_writeb(stbcr, STBCR); clear_bl_bit(); } @@ -115,21 +115,21 @@ static int hp6x0_pm_enter(suspend_state_t state) outw(hd64461_stbcr, HD64461_STBCR); #endif - ctrl_outb(0x1f, DACR); + __raw_writeb(0x1f, DACR); - stbcr = ctrl_inb(STBCR); - ctrl_outb(0x01, STBCR); + stbcr = __raw_readb(STBCR); + __raw_writeb(0x01, STBCR); - stbcr2 = ctrl_inb(STBCR2); - ctrl_outb(0x7f , STBCR2); + stbcr2 = __raw_readb(STBCR2); + __raw_writeb(0x7f , STBCR2); outw(0xf07f, HD64461_SCPUCR); pm_enter(); outw(0, HD64461_SCPUCR); - ctrl_outb(stbcr, STBCR); - ctrl_outb(stbcr2, STBCR2); + __raw_writeb(stbcr, STBCR); + __raw_writeb(stbcr2, STBCR2); #ifdef CONFIG_HD64461_ENABLER hd64461_stbcr = inw(HD64461_STBCR); diff --git a/arch/sh/boards/mach-hp6xx/setup.c b/arch/sh/boards/mach-hp6xx/setup.c index e6dd5e96321e..8c9add5f4cfa 100644 --- a/arch/sh/boards/mach-hp6xx/setup.c +++ b/arch/sh/boards/mach-hp6xx/setup.c @@ -149,19 +149,19 @@ static void __init hp6xx_setup(char **cmdline_p) sh_dac_output(0, DAC_SPEAKER_VOLUME); sh_dac_disable(DAC_SPEAKER_VOLUME); - v8 = ctrl_inb(DACR); + v8 = __raw_readb(DACR); v8 &= ~DACR_DAE; - ctrl_outb(v8,DACR); + __raw_writeb(v8,DACR); - v8 = ctrl_inb(SCPDR); + v8 = __raw_readb(SCPDR); v8 |= SCPDR_TS_SCAN_X | SCPDR_TS_SCAN_Y; v8 &= ~SCPDR_TS_SCAN_ENABLE; - ctrl_outb(v8, SCPDR); + __raw_writeb(v8, SCPDR); - v = ctrl_inw(SCPCR); + v = __raw_readw(SCPCR); v &= ~SCPCR_TS_MASK; v |= SCPCR_TS_ENABLE; - ctrl_outw(v, SCPCR); + __raw_writew(v, SCPCR); } device_initcall(hp6xx_devices_setup); diff --git a/arch/sh/boards/mach-kfr2r09/setup.c b/arch/sh/boards/mach-kfr2r09/setup.c index 5d7b5d92475e..ca9e82d77d0a 100644 --- a/arch/sh/boards/mach-kfr2r09/setup.c +++ b/arch/sh/boards/mach-kfr2r09/setup.c @@ -282,7 +282,7 @@ static int camera_power(struct device *dev, int mode) * use 1.8 V for VccQ_VIO * use 2.85V for VccQ_SR */ - ctrl_outw((ctrl_inw(DRVCRB) & ~0x0003) | 0x0001, DRVCRB); + __raw_writew((__raw_readw(DRVCRB) & ~0x0003) | 0x0001, DRVCRB); /* reset clear */ ret = gpio_request(GPIO_PTB4, NULL); @@ -492,13 +492,13 @@ static int kfr2r09_usb0_gadget_setup(void) if (kfr2r09_usb0_gadget_i2c_setup() != 0) return -ENODEV; /* unable to configure using i2c */ - ctrl_outw((ctrl_inw(PORT_MSELCRB) & ~0xc000) | 0x8000, PORT_MSELCRB); + __raw_writew((__raw_readw(PORT_MSELCRB) & ~0xc000) | 0x8000, PORT_MSELCRB); gpio_request(GPIO_FN_PDSTATUS, NULL); /* R-standby disables USB clock */ gpio_request(GPIO_PTV6, NULL); /* USBCLK_ON */ gpio_direction_output(GPIO_PTV6, 1); /* USBCLK_ON = H */ msleep(20); /* wait 20ms to let the clock settle */ clk_enable(clk_get(NULL, "usb0")); - ctrl_outw(0x0600, 0xa40501d4); + __raw_writew(0x0600, 0xa40501d4); return 0; } @@ -526,12 +526,12 @@ static int __init kfr2r09_devices_setup(void) gpio_direction_output(GPIO_PTG3, 1); /* HPON_ON = H */ /* setup NOR flash at CS0 */ - ctrl_outl(0x36db0400, BSC_CS0BCR); - ctrl_outl(0x00000500, BSC_CS0WCR); + __raw_writel(0x36db0400, BSC_CS0BCR); + __raw_writel(0x00000500, BSC_CS0WCR); /* setup NAND flash at CS4 */ - ctrl_outl(0x36db0400, BSC_CS4BCR); - ctrl_outl(0x00000500, BSC_CS4WCR); + __raw_writel(0x36db0400, BSC_CS4BCR); + __raw_writel(0x00000500, BSC_CS4WCR); /* setup KEYSC pins */ gpio_request(GPIO_FN_KEYOUT0, NULL); diff --git a/arch/sh/boards/mach-landisk/gio.c b/arch/sh/boards/mach-landisk/gio.c index 528013188196..01e6abb769b9 100644 --- a/arch/sh/boards/mach-landisk/gio.c +++ b/arch/sh/boards/mach-landisk/gio.c @@ -76,39 +76,39 @@ static long gio_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) break; case GIODRV_IOCSGIODATA1: /* write byte */ - ctrl_outb((unsigned char)(0x0ff & data), addr); + __raw_writeb((unsigned char)(0x0ff & data), addr); break; case GIODRV_IOCSGIODATA2: /* write word */ if (addr & 0x01) { return -EFAULT; } - ctrl_outw((unsigned short int)(0x0ffff & data), addr); + __raw_writew((unsigned short int)(0x0ffff & data), addr); break; case GIODRV_IOCSGIODATA4: /* write long */ if (addr & 0x03) { return -EFAULT; } - ctrl_outl(data, addr); + __raw_writel(data, addr); break; case GIODRV_IOCGGIODATA1: /* read byte */ - data = ctrl_inb(addr); + data = __raw_readb(addr); break; case GIODRV_IOCGGIODATA2: /* read word */ if (addr & 0x01) { return -EFAULT; } - data = ctrl_inw(addr); + data = __raw_readw(addr); break; case GIODRV_IOCGGIODATA4: /* read long */ if (addr & 0x03) { return -EFAULT; } - data = ctrl_inl(addr); + data = __raw_readl(addr); break; default: return -EFAULT; diff --git a/arch/sh/boards/mach-landisk/irq.c b/arch/sh/boards/mach-landisk/irq.c index 7b284cde1f58..96f38a4187d0 100644 --- a/arch/sh/boards/mach-landisk/irq.c +++ b/arch/sh/boards/mach-landisk/irq.c @@ -22,14 +22,14 @@ static void disable_landisk_irq(unsigned int irq) { unsigned char mask = 0xff ^ (0x01 << (irq - 5)); - ctrl_outb(ctrl_inb(PA_IMASK) & mask, PA_IMASK); + __raw_writeb(__raw_readb(PA_IMASK) & mask, PA_IMASK); } static void enable_landisk_irq(unsigned int irq) { unsigned char value = (0x01 << (irq - 5)); - ctrl_outb(ctrl_inb(PA_IMASK) | value, PA_IMASK); + __raw_writeb(__raw_readb(PA_IMASK) | value, PA_IMASK); } static struct irq_chip landisk_irq_chip __read_mostly = { @@ -52,5 +52,5 @@ void __init init_landisk_IRQ(void) handle_level_irq, "level"); enable_landisk_irq(i); } - ctrl_outb(0x00, PA_PWRINT_CLR); + __raw_writeb(0x00, PA_PWRINT_CLR); } diff --git a/arch/sh/boards/mach-landisk/psw.c b/arch/sh/boards/mach-landisk/psw.c index e6b0efa098d1..bef83522f958 100644 --- a/arch/sh/boards/mach-landisk/psw.c +++ b/arch/sh/boards/mach-landisk/psw.c @@ -25,7 +25,7 @@ static irqreturn_t psw_irq_handler(int irq, void *arg) unsigned int sw_value; int ret = 0; - sw_value = (0x0ff & (~ctrl_inb(PA_STATUS))); + sw_value = (0x0ff & (~__raw_readb(PA_STATUS))); /* Nothing to do if there's no state change */ if (psw->state) { @@ -42,7 +42,7 @@ static irqreturn_t psw_irq_handler(int irq, void *arg) out: /* Clear the switch IRQs */ - ctrl_outb(0x00, PA_PWRINT_CLR); + __raw_writeb(0x00, PA_PWRINT_CLR); return IRQ_RETVAL(ret); } diff --git a/arch/sh/boards/mach-landisk/setup.c b/arch/sh/boards/mach-landisk/setup.c index 2d09d4d34f87..50337acc18c5 100644 --- a/arch/sh/boards/mach-landisk/setup.c +++ b/arch/sh/boards/mach-landisk/setup.c @@ -25,7 +25,7 @@ void init_landisk_IRQ(void); static void landisk_power_off(void) { - ctrl_outb(0x01, PA_SHUTDOWN); + __raw_writeb(0x01, PA_SHUTDOWN); } static struct resource cf_ide_resources[3]; @@ -88,7 +88,7 @@ __initcall(landisk_devices_setup); static void __init landisk_setup(char **cmdline_p) { /* LED ON */ - ctrl_outb(ctrl_inb(PA_LED) | 0x03, PA_LED); + __raw_writeb(__raw_readb(PA_LED) | 0x03, PA_LED); printk(KERN_INFO "I-O DATA DEVICE, INC. \"LANDISK Series\" support.\n"); pm_power_off = landisk_power_off; diff --git a/arch/sh/boards/mach-microdev/io.c b/arch/sh/boards/mach-microdev/io.c index 52dd748211c7..2960c659020e 100644 --- a/arch/sh/boards/mach-microdev/io.c +++ b/arch/sh/boards/mach-microdev/io.c @@ -141,10 +141,10 @@ static inline void delay(void) #if defined(CONFIG_PCI) /* System board present, just make a dummy SRAM access. (CS0 will be mapped to PCI memory, probably good to avoid it.) */ - ctrl_inw(0xa6800000); + __raw_readw(0xa6800000); #else /* CS0 will be mapped to flash, ROM etc so safe to access it. */ - ctrl_inw(0xa0000000); + __raw_readw(0xa0000000); #endif } diff --git a/arch/sh/boards/mach-microdev/irq.c b/arch/sh/boards/mach-microdev/irq.c index b551963579c1..a26d16669aa2 100644 --- a/arch/sh/boards/mach-microdev/irq.c +++ b/arch/sh/boards/mach-microdev/irq.c @@ -88,7 +88,7 @@ static void disable_microdev_irq(unsigned int irq) fpgaIrq = fpgaIrqTable[irq].fpgaIrq; /* disable interrupts on the FPGA INTC register */ - ctrl_outl(MICRODEV_FPGA_INTC_MASK(fpgaIrq), MICRODEV_FPGA_INTDSB_REG); + __raw_writel(MICRODEV_FPGA_INTC_MASK(fpgaIrq), MICRODEV_FPGA_INTDSB_REG); } static void enable_microdev_irq(unsigned int irq) @@ -107,13 +107,13 @@ static void enable_microdev_irq(unsigned int irq) priorityReg = MICRODEV_FPGA_INTPRI_REG(fpgaIrq); /* set priority for the interrupt */ - priorities = ctrl_inl(priorityReg); + priorities = __raw_readl(priorityReg); priorities &= ~MICRODEV_FPGA_INTPRI_MASK(fpgaIrq); priorities |= MICRODEV_FPGA_INTPRI_LEVEL(fpgaIrq, pri); - ctrl_outl(priorities, priorityReg); + __raw_writel(priorities, priorityReg); /* enable interrupts on the FPGA INTC register */ - ctrl_outl(MICRODEV_FPGA_INTC_MASK(fpgaIrq), MICRODEV_FPGA_INTENB_REG); + __raw_writel(MICRODEV_FPGA_INTC_MASK(fpgaIrq), MICRODEV_FPGA_INTENB_REG); } /* This function sets the desired irq handler to be a MicroDev type */ @@ -134,7 +134,7 @@ extern void __init init_microdev_irq(void) int i; /* disable interrupts on the FPGA INTC register */ - ctrl_outl(~0ul, MICRODEV_FPGA_INTDSB_REG); + __raw_writel(~0ul, MICRODEV_FPGA_INTDSB_REG); for (i = 0; i < NUM_EXTERNAL_IRQS; i++) make_microdev_irq(i); diff --git a/arch/sh/boards/mach-migor/setup.c b/arch/sh/boards/mach-migor/setup.c index 507c77be476d..ed2eeeb390a5 100644 --- a/arch/sh/boards/mach-migor/setup.c +++ b/arch/sh/boards/mach-migor/setup.c @@ -516,8 +516,8 @@ static int __init migor_devices_setup(void) /* SMC91C111 - Enable IRQ0, Setup CS4 for 16-bit fast access */ gpio_request(GPIO_FN_IRQ0, NULL); - ctrl_outl(0x00003400, BSC_CS4BCR); - ctrl_outl(0x00110080, BSC_CS4WCR); + __raw_writel(0x00003400, BSC_CS4BCR); + __raw_writel(0x00110080, BSC_CS4WCR); /* KEYSC */ gpio_request(GPIO_FN_KEYOUT0, NULL); @@ -533,7 +533,7 @@ static int __init migor_devices_setup(void) /* NAND Flash */ gpio_request(GPIO_FN_CS6A_CE2B, NULL); - ctrl_outl((ctrl_inl(BSC_CS6ABCR) & ~0x0600) | 0x0200, BSC_CS6ABCR); + __raw_writel((__raw_readl(BSC_CS6ABCR) & ~0x0600) | 0x0200, BSC_CS6ABCR); gpio_request(GPIO_PTA1, NULL); gpio_direction_input(GPIO_PTA1); @@ -627,7 +627,7 @@ static int __init migor_devices_setup(void) #else gpio_direction_output(GPIO_PTT0, 1); #endif - ctrl_outw(ctrl_inw(PORT_MSELCRB) | 0x2000, PORT_MSELCRB); /* D15->D8 */ + __raw_writew(__raw_readw(PORT_MSELCRB) | 0x2000, PORT_MSELCRB); /* D15->D8 */ platform_resource_setup_memory(&migor_ceu_device, "ceu", 4 << 20); diff --git a/arch/sh/boards/mach-r2d/irq.c b/arch/sh/boards/mach-r2d/irq.c index 78d7b27c80da..574f009c3c31 100644 --- a/arch/sh/boards/mach-r2d/irq.c +++ b/arch/sh/boards/mach-r2d/irq.c @@ -129,7 +129,7 @@ void __init init_rts7751r2d_IRQ(void) { struct intc_desc *d; - switch (ctrl_inw(PA_VERREG) & 0xf0) { + switch (__raw_readw(PA_VERREG) & 0xf0) { #ifdef CONFIG_RTS7751R2D_PLUS case 0x10: printk(KERN_INFO "Using R2D-PLUS interrupt controller.\n"); @@ -147,7 +147,7 @@ void __init init_rts7751r2d_IRQ(void) #endif default: printk(KERN_INFO "Unknown R2D interrupt controller 0x%04x\n", - ctrl_inw(PA_VERREG)); + __raw_readw(PA_VERREG)); return; } diff --git a/arch/sh/boards/mach-r2d/setup.c b/arch/sh/boards/mach-r2d/setup.c index a625ecb93e47..b84df6a3a93c 100644 --- a/arch/sh/boards/mach-r2d/setup.c +++ b/arch/sh/boards/mach-r2d/setup.c @@ -70,7 +70,7 @@ static struct spi_board_info spi_bus[] = { static void r2d_chip_select(struct sh_spi_info *spi, int cs, int state) { BUG_ON(cs != 0); /* Single Epson RTC-9701JE attached on CS0 */ - ctrl_outw(state == BITBANG_CS_ACTIVE, PA_RTCCE); + __raw_writew(state == BITBANG_CS_ACTIVE, PA_RTCCE); } static struct sh_spi_info spi_info = { @@ -262,7 +262,7 @@ __initcall(rts7751r2d_devices_setup); static void rts7751r2d_power_off(void) { - ctrl_outw(0x0001, PA_POWOFF); + __raw_writew(0x0001, PA_POWOFF); } /* @@ -271,14 +271,14 @@ static void rts7751r2d_power_off(void) static void __init rts7751r2d_setup(char **cmdline_p) { void __iomem *sm501_reg; - u16 ver = ctrl_inw(PA_VERREG); + u16 ver = __raw_readw(PA_VERREG); printk(KERN_INFO "Renesas Technology Sales RTS7751R2D support.\n"); printk(KERN_INFO "FPGA version:%d (revision:%d)\n", (ver >> 4) & 0xf, ver & 0xf); - ctrl_outw(0x0000, PA_OUTPORT); + __raw_writew(0x0000, PA_OUTPORT); pm_power_off = rts7751r2d_power_off; /* sm501 dram configuration: diff --git a/arch/sh/boards/mach-rsk/devices-rsk7203.c b/arch/sh/boards/mach-rsk/devices-rsk7203.c index c37617e63220..4fa08ba10253 100644 --- a/arch/sh/boards/mach-rsk/devices-rsk7203.c +++ b/arch/sh/boards/mach-rsk/devices-rsk7203.c @@ -96,7 +96,7 @@ static int __init rsk7203_devices_setup(void) gpio_request(GPIO_FN_RXD0, NULL); /* Setup LAN9118: CS1 in 16-bit Big Endian Mode, IRQ0 at Port B */ - ctrl_outl(0x36db0400, 0xfffc0008); /* CS1BCR */ + __raw_writel(0x36db0400, 0xfffc0008); /* CS1BCR */ gpio_request(GPIO_FN_IRQ0_PB, NULL); return platform_add_devices(rsk7203_devices, diff --git a/arch/sh/boards/mach-sdk7780/irq.c b/arch/sh/boards/mach-sdk7780/irq.c index 855558163c58..e5f7564f2511 100644 --- a/arch/sh/boards/mach-sdk7780/irq.c +++ b/arch/sh/boards/mach-sdk7780/irq.c @@ -37,9 +37,9 @@ void __init init_sdk7780_IRQ(void) { printk(KERN_INFO "Using SDK7780 interrupt controller.\n"); - ctrl_outw(0xFFFF, FPGA_IRQ0MR); + __raw_writew(0xFFFF, FPGA_IRQ0MR); /* Setup IRL 0-3 */ - ctrl_outw(0x0003, FPGA_IMSR); + __raw_writew(0x0003, FPGA_IMSR); plat_irq_setup_pins(IRQ_MODE_IRL3210); register_intc_controller(&fpga_intc_desc); diff --git a/arch/sh/boards/mach-sdk7780/setup.c b/arch/sh/boards/mach-sdk7780/setup.c index b887373a2599..4da38db4b5fe 100644 --- a/arch/sh/boards/mach-sdk7780/setup.c +++ b/arch/sh/boards/mach-sdk7780/setup.c @@ -74,8 +74,8 @@ device_initcall(sdk7780_devices_setup); static void __init sdk7780_setup(char **cmdline_p) { - u16 ver = ctrl_inw(FPGA_FPVERR); - u16 dateStamp = ctrl_inw(FPGA_FPDATER); + u16 ver = __raw_readw(FPGA_FPVERR); + u16 dateStamp = __raw_readw(FPGA_FPDATER); printk(KERN_INFO "Renesas Technology Europe SDK7780 support.\n"); printk(KERN_INFO "Board version: %d (revision %d), " @@ -85,7 +85,7 @@ static void __init sdk7780_setup(char **cmdline_p) dateStamp); /* Setup pin mux'ing for PCIC */ - ctrl_outw(0x0000, GPIO_PECR); + __raw_writew(0x0000, GPIO_PECR); } /* diff --git a/arch/sh/boards/mach-se/7206/io.c b/arch/sh/boards/mach-se/7206/io.c index 180455642a43..adadc77532ee 100644 --- a/arch/sh/boards/mach-se/7206/io.c +++ b/arch/sh/boards/mach-se/7206/io.c @@ -16,7 +16,7 @@ static inline void delay(void) { - ctrl_inw(0x20000000); /* P2 ROM Area */ + __raw_readw(0x20000000); /* P2 ROM Area */ } /* MS7750 requires special versions of in*, out* routines, since diff --git a/arch/sh/boards/mach-se/7206/irq.c b/arch/sh/boards/mach-se/7206/irq.c index aef7f052851a..79be4bc59933 100644 --- a/arch/sh/boards/mach-se/7206/irq.c +++ b/arch/sh/boards/mach-se/7206/irq.c @@ -32,12 +32,12 @@ static void disable_se7206_irq(unsigned int irq) unsigned short msk0,msk1; /* Set the priority in IPR to 0 */ - val = ctrl_inw(INTC_IPR01); + val = __raw_readw(INTC_IPR01); val &= mask; - ctrl_outw(val, INTC_IPR01); + __raw_writew(val, INTC_IPR01); /* FPGA mask set */ - msk0 = ctrl_inw(INTMSK0); - msk1 = ctrl_inw(INTMSK1); + msk0 = __raw_readw(INTMSK0); + msk1 = __raw_readw(INTMSK1); switch (irq) { case IRQ0_IRQ: @@ -51,8 +51,8 @@ static void disable_se7206_irq(unsigned int irq) msk1 |= 0x00ff; break; } - ctrl_outw(msk0, INTMSK0); - ctrl_outw(msk1, INTMSK1); + __raw_writew(msk0, INTMSK0); + __raw_writew(msk1, INTMSK1); } static void enable_se7206_irq(unsigned int irq) @@ -62,13 +62,13 @@ static void enable_se7206_irq(unsigned int irq) unsigned short msk0,msk1; /* Set priority in IPR back to original value */ - val = ctrl_inw(INTC_IPR01); + val = __raw_readw(INTC_IPR01); val |= value; - ctrl_outw(val, INTC_IPR01); + __raw_writew(val, INTC_IPR01); /* FPGA mask reset */ - msk0 = ctrl_inw(INTMSK0); - msk1 = ctrl_inw(INTMSK1); + msk0 = __raw_readw(INTMSK0); + msk1 = __raw_readw(INTMSK1); switch (irq) { case IRQ0_IRQ: @@ -82,8 +82,8 @@ static void enable_se7206_irq(unsigned int irq) msk1 &= ~0x00ff; break; } - ctrl_outw(msk0, INTMSK0); - ctrl_outw(msk1, INTMSK1); + __raw_writew(msk0, INTMSK0); + __raw_writew(msk1, INTMSK1); } static void eoi_se7206_irq(unsigned int irq) @@ -93,8 +93,8 @@ static void eoi_se7206_irq(unsigned int irq) if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) enable_se7206_irq(irq); /* FPGA isr clear */ - sts0 = ctrl_inw(INTSTS0); - sts1 = ctrl_inw(INTSTS1); + sts0 = __raw_readw(INTSTS0); + sts1 = __raw_readw(INTSTS1); switch (irq) { case IRQ0_IRQ: @@ -108,8 +108,8 @@ static void eoi_se7206_irq(unsigned int irq) sts1 &= ~0x00ff; break; } - ctrl_outw(sts0, INTSTS0); - ctrl_outw(sts1, INTSTS1); + __raw_writew(sts0, INTSTS0); + __raw_writew(sts1, INTSTS1); } static struct irq_chip se7206_irq_chip __read_mostly = { @@ -136,11 +136,11 @@ void __init init_se7206_IRQ(void) make_se7206_irq(IRQ0_IRQ); /* SMC91C111 */ make_se7206_irq(IRQ1_IRQ); /* ATA */ make_se7206_irq(IRQ3_IRQ); /* SLOT / PCM */ - ctrl_outw(inw(INTC_ICR1) | 0x000b ,INTC_ICR1 ) ; /* ICR1 */ + __raw_writew(inw(INTC_ICR1) | 0x000b ,INTC_ICR1 ) ; /* ICR1 */ /* FPGA System register setup*/ - ctrl_outw(0x0000,INTSTS0); /* Clear INTSTS0 */ - ctrl_outw(0x0000,INTSTS1); /* Clear INTSTS1 */ + __raw_writew(0x0000,INTSTS0); /* Clear INTSTS0 */ + __raw_writew(0x0000,INTSTS1); /* Clear INTSTS1 */ /* IRQ0=LAN, IRQ1=ATA, IRQ3=SLT,PCM */ - ctrl_outw(0x0001,INTSEL); + __raw_writew(0x0001,INTSEL); } diff --git a/arch/sh/boards/mach-se/7343/irq.c b/arch/sh/boards/mach-se/7343/irq.c index c60fd13608d0..d4305c26e9f7 100644 --- a/arch/sh/boards/mach-se/7343/irq.c +++ b/arch/sh/boards/mach-se/7343/irq.c @@ -21,13 +21,13 @@ unsigned int se7343_fpga_irq[SE7343_FPGA_IRQ_NR] = { 0, }; static void disable_se7343_irq(unsigned int irq) { unsigned int bit = (unsigned int)get_irq_chip_data(irq); - ctrl_outw(ctrl_inw(PA_CPLD_IMSK) | 1 << bit, PA_CPLD_IMSK); + __raw_writew(__raw_readw(PA_CPLD_IMSK) | 1 << bit, PA_CPLD_IMSK); } static void enable_se7343_irq(unsigned int irq) { unsigned int bit = (unsigned int)get_irq_chip_data(irq); - ctrl_outw(ctrl_inw(PA_CPLD_IMSK) & ~(1 << bit), PA_CPLD_IMSK); + __raw_writew(__raw_readw(PA_CPLD_IMSK) & ~(1 << bit), PA_CPLD_IMSK); } static struct irq_chip se7343_irq_chip __read_mostly = { @@ -39,7 +39,7 @@ static struct irq_chip se7343_irq_chip __read_mostly = { static void se7343_irq_demux(unsigned int irq, struct irq_desc *desc) { - unsigned short intv = ctrl_inw(PA_CPLD_ST); + unsigned short intv = __raw_readw(PA_CPLD_ST); unsigned int ext_irq = 0; intv &= (1 << SE7343_FPGA_IRQ_NR) - 1; @@ -59,8 +59,8 @@ void __init init_7343se_IRQ(void) { int i, irq; - ctrl_outw(0, PA_CPLD_IMSK); /* disable all irqs */ - ctrl_outw(0x2000, 0xb03fffec); /* mrshpc irq enable */ + __raw_writew(0, PA_CPLD_IMSK); /* disable all irqs */ + __raw_writew(0x2000, 0xb03fffec); /* mrshpc irq enable */ for (i = 0; i < SE7343_FPGA_IRQ_NR; i++) { irq = create_irq(); diff --git a/arch/sh/boards/mach-se/7343/setup.c b/arch/sh/boards/mach-se/7343/setup.c index 3412bb2973ae..d2370af56d77 100644 --- a/arch/sh/boards/mach-se/7343/setup.c +++ b/arch/sh/boards/mach-se/7343/setup.c @@ -161,10 +161,10 @@ device_initcall(sh7343se_devices_setup); */ static void __init sh7343se_setup(char **cmdline_p) { - ctrl_outw(0xf900, FPGA_OUT); /* FPGA */ + __raw_writew(0xf900, FPGA_OUT); /* FPGA */ - ctrl_outw(0x0002, PORT_PECR); /* PORT E 1 = IRQ5 */ - ctrl_outw(0x0020, PORT_PSELD); + __raw_writew(0x0002, PORT_PECR); /* PORT E 1 = IRQ5 */ + __raw_writew(0x0020, PORT_PSELD); printk(KERN_INFO "MS7343CP01 Setup...done\n"); } diff --git a/arch/sh/boards/mach-se/770x/irq.c b/arch/sh/boards/mach-se/770x/irq.c index ec1fea571b52..1028c17b81bc 100644 --- a/arch/sh/boards/mach-se/770x/irq.c +++ b/arch/sh/boards/mach-se/770x/irq.c @@ -96,13 +96,13 @@ static struct ipr_desc ipr_irq_desc = { void __init init_se_IRQ(void) { /* Disable all interrupts */ - ctrl_outw(0, BCR_ILCRA); - ctrl_outw(0, BCR_ILCRB); - ctrl_outw(0, BCR_ILCRC); - ctrl_outw(0, BCR_ILCRD); - ctrl_outw(0, BCR_ILCRE); - ctrl_outw(0, BCR_ILCRF); - ctrl_outw(0, BCR_ILCRG); + __raw_writew(0, BCR_ILCRA); + __raw_writew(0, BCR_ILCRB); + __raw_writew(0, BCR_ILCRC); + __raw_writew(0, BCR_ILCRD); + __raw_writew(0, BCR_ILCRE); + __raw_writew(0, BCR_ILCRF); + __raw_writew(0, BCR_ILCRG); register_ipr_controller(&ipr_irq_desc); } diff --git a/arch/sh/boards/mach-se/7721/irq.c b/arch/sh/boards/mach-se/7721/irq.c index b417acc4dad0..d85022ea3f12 100644 --- a/arch/sh/boards/mach-se/7721/irq.c +++ b/arch/sh/boards/mach-se/7721/irq.c @@ -38,7 +38,7 @@ static DECLARE_INTC_DESC(intc_desc, "SE7721", vectors, void __init init_se7721_IRQ(void) { /* PPCR */ - ctrl_outw(ctrl_inw(0xa4050118) & ~0x00ff, 0xa4050118); + __raw_writew(__raw_readw(0xa4050118) & ~0x00ff, 0xa4050118); register_intc_controller(&intc_desc); intc_set_priority(MRSHPC_IRQ0, 0xf - MRSHPC_IRQ0); diff --git a/arch/sh/boards/mach-se/7721/setup.c b/arch/sh/boards/mach-se/7721/setup.c index 460da53b4961..7416ad7ee53a 100644 --- a/arch/sh/boards/mach-se/7721/setup.c +++ b/arch/sh/boards/mach-se/7721/setup.c @@ -80,10 +80,10 @@ device_initcall(se7721_devices_setup); static void __init se7721_setup(char **cmdline_p) { /* for USB */ - ctrl_outw(0x0000, 0xA405010C); /* PGCR */ - ctrl_outw(0x0000, 0xA405010E); /* PHCR */ - ctrl_outw(0x00AA, 0xA4050118); /* PPCR */ - ctrl_outw(0x0000, 0xA4050124); /* PSELA */ + __raw_writew(0x0000, 0xA405010C); /* PGCR */ + __raw_writew(0x0000, 0xA405010E); /* PHCR */ + __raw_writew(0x00AA, 0xA4050118); /* PPCR */ + __raw_writew(0x0000, 0xA4050124); /* PSELA */ } /* diff --git a/arch/sh/boards/mach-se/7722/irq.c b/arch/sh/boards/mach-se/7722/irq.c index b221b6842b0d..61605db04ee6 100644 --- a/arch/sh/boards/mach-se/7722/irq.c +++ b/arch/sh/boards/mach-se/7722/irq.c @@ -21,13 +21,13 @@ unsigned int se7722_fpga_irq[SE7722_FPGA_IRQ_NR] = { 0, }; static void disable_se7722_irq(unsigned int irq) { unsigned int bit = (unsigned int)get_irq_chip_data(irq); - ctrl_outw(ctrl_inw(IRQ01_MASK) | 1 << bit, IRQ01_MASK); + __raw_writew(__raw_readw(IRQ01_MASK) | 1 << bit, IRQ01_MASK); } static void enable_se7722_irq(unsigned int irq) { unsigned int bit = (unsigned int)get_irq_chip_data(irq); - ctrl_outw(ctrl_inw(IRQ01_MASK) & ~(1 << bit), IRQ01_MASK); + __raw_writew(__raw_readw(IRQ01_MASK) & ~(1 << bit), IRQ01_MASK); } static struct irq_chip se7722_irq_chip __read_mostly = { @@ -39,7 +39,7 @@ static struct irq_chip se7722_irq_chip __read_mostly = { static void se7722_irq_demux(unsigned int irq, struct irq_desc *desc) { - unsigned short intv = ctrl_inw(IRQ01_STS); + unsigned short intv = __raw_readw(IRQ01_STS); unsigned int ext_irq = 0; intv &= (1 << SE7722_FPGA_IRQ_NR) - 1; @@ -59,8 +59,8 @@ void __init init_se7722_IRQ(void) { int i, irq; - ctrl_outw(0, IRQ01_MASK); /* disable all irqs */ - ctrl_outw(0x2000, 0xb03fffec); /* mrshpc irq enable */ + __raw_writew(0, IRQ01_MASK); /* disable all irqs */ + __raw_writew(0x2000, 0xb03fffec); /* mrshpc irq enable */ for (i = 0; i < SE7722_FPGA_IRQ_NR; i++) { irq = create_irq(); diff --git a/arch/sh/boards/mach-se/7722/setup.c b/arch/sh/boards/mach-se/7722/setup.c index 93675418171d..80a4e571b310 100644 --- a/arch/sh/boards/mach-se/7722/setup.c +++ b/arch/sh/boards/mach-se/7722/setup.c @@ -156,32 +156,32 @@ device_initcall(se7722_devices_setup); static void __init se7722_setup(char **cmdline_p) { - ctrl_outw(0x010D, FPGA_OUT); /* FPGA */ + __raw_writew(0x010D, FPGA_OUT); /* FPGA */ - ctrl_outw(0x0000, PORT_PECR); /* PORT E 1 = IRQ5 ,E 0 = BS */ - ctrl_outw(0x1000, PORT_PJCR); /* PORT J 1 = IRQ1,J 0 =IRQ0 */ + __raw_writew(0x0000, PORT_PECR); /* PORT E 1 = IRQ5 ,E 0 = BS */ + __raw_writew(0x1000, PORT_PJCR); /* PORT J 1 = IRQ1,J 0 =IRQ0 */ /* LCDC I/O */ - ctrl_outw(0x0020, PORT_PSELD); + __raw_writew(0x0020, PORT_PSELD); /* SIOF1*/ - ctrl_outw(0x0003, PORT_PSELB); - ctrl_outw(0xe000, PORT_PSELC); - ctrl_outw(0x0000, PORT_PKCR); + __raw_writew(0x0003, PORT_PSELB); + __raw_writew(0xe000, PORT_PSELC); + __raw_writew(0x0000, PORT_PKCR); /* LCDC */ - ctrl_outw(0x4020, PORT_PHCR); - ctrl_outw(0x0000, PORT_PLCR); - ctrl_outw(0x0000, PORT_PMCR); - ctrl_outw(0x0002, PORT_PRCR); - ctrl_outw(0x0000, PORT_PXCR); /* LCDC,CS6A */ + __raw_writew(0x4020, PORT_PHCR); + __raw_writew(0x0000, PORT_PLCR); + __raw_writew(0x0000, PORT_PMCR); + __raw_writew(0x0002, PORT_PRCR); + __raw_writew(0x0000, PORT_PXCR); /* LCDC,CS6A */ /* KEYSC */ - ctrl_outw(0x0A10, PORT_PSELA); /* BS,SHHID2 */ - ctrl_outw(0x0000, PORT_PYCR); - ctrl_outw(0x0000, PORT_PZCR); - ctrl_outw(ctrl_inw(PORT_HIZCRA) & ~0x4000, PORT_HIZCRA); - ctrl_outw(ctrl_inw(PORT_HIZCRC) & ~0xc000, PORT_HIZCRC); + __raw_writew(0x0A10, PORT_PSELA); /* BS,SHHID2 */ + __raw_writew(0x0000, PORT_PYCR); + __raw_writew(0x0000, PORT_PZCR); + __raw_writew(__raw_readw(PORT_HIZCRA) & ~0x4000, PORT_HIZCRA); + __raw_writew(__raw_readw(PORT_HIZCRC) & ~0xc000, PORT_HIZCRC); } /* diff --git a/arch/sh/boards/mach-se/7724/irq.c b/arch/sh/boards/mach-se/7724/irq.c index f76cf3b49f23..e5e021a7d1e6 100644 --- a/arch/sh/boards/mach-se/7724/irq.c +++ b/arch/sh/boards/mach-se/7724/irq.c @@ -72,14 +72,14 @@ static void disable_se7724_irq(unsigned int irq) { struct fpga_irq set = get_fpga_irq(fpga2irq(irq)); unsigned int bit = irq - set.base; - ctrl_outw(ctrl_inw(set.mraddr) | 0x0001 << bit, set.mraddr); + __raw_writew(__raw_readw(set.mraddr) | 0x0001 << bit, set.mraddr); } static void enable_se7724_irq(unsigned int irq) { struct fpga_irq set = get_fpga_irq(fpga2irq(irq)); unsigned int bit = irq - set.base; - ctrl_outw(ctrl_inw(set.mraddr) & ~(0x0001 << bit), set.mraddr); + __raw_writew(__raw_readw(set.mraddr) & ~(0x0001 << bit), set.mraddr); } static struct irq_chip se7724_irq_chip __read_mostly = { @@ -92,7 +92,7 @@ static struct irq_chip se7724_irq_chip __read_mostly = { static void se7724_irq_demux(unsigned int irq, struct irq_desc *desc) { struct fpga_irq set = get_fpga_irq(irq); - unsigned short intv = ctrl_inw(set.sraddr); + unsigned short intv = __raw_readw(set.sraddr); struct irq_desc *ext_desc; unsigned int ext_irq = set.base; @@ -115,13 +115,13 @@ void __init init_se7724_IRQ(void) { int i; - ctrl_outw(0xffff, IRQ0_MR); /* mask all */ - ctrl_outw(0xffff, IRQ1_MR); /* mask all */ - ctrl_outw(0xffff, IRQ2_MR); /* mask all */ - ctrl_outw(0x0000, IRQ0_SR); /* clear irq */ - ctrl_outw(0x0000, IRQ1_SR); /* clear irq */ - ctrl_outw(0x0000, IRQ2_SR); /* clear irq */ - ctrl_outw(0x002a, IRQ_MODE); /* set irq type */ + __raw_writew(0xffff, IRQ0_MR); /* mask all */ + __raw_writew(0xffff, IRQ1_MR); /* mask all */ + __raw_writew(0xffff, IRQ2_MR); /* mask all */ + __raw_writew(0x0000, IRQ0_SR); /* clear irq */ + __raw_writew(0x0000, IRQ1_SR); /* clear irq */ + __raw_writew(0x0000, IRQ2_SR); /* clear irq */ + __raw_writew(0x002a, IRQ_MODE); /* set irq type */ for (i = 0; i < SE7724_FPGA_IRQ_NR; i++) set_irq_chip_and_handler_name(SE7724_FPGA_IRQ_BASE + i, diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c index cbfba783ee49..242dc843f574 100644 --- a/arch/sh/boards/mach-se/7724/setup.c +++ b/arch/sh/boards/mach-se/7724/setup.c @@ -256,12 +256,12 @@ static struct platform_device ceu1_device = { #define FCLKACR 0xa4150008 static void fsimck_init(struct clk *clk) { - u32 status = ctrl_inl(clk->enable_reg); + u32 status = __raw_readl(clk->enable_reg); /* use external clock */ status &= ~0x000000ff; status |= 0x00000080; - ctrl_outl(status, clk->enable_reg); + __raw_writel(status, clk->enable_reg); } static struct clk_ops fsimck_clk_ops = { @@ -522,7 +522,7 @@ static int __init sh_eth_is_eeprom_ready(void) int t = 10000; while (t--) { - if (!ctrl_inw(EEPROM_STAT)) + if (!__raw_readw(EEPROM_STAT)) return 1; cpu_relax(); } @@ -542,13 +542,13 @@ static void __init sh_eth_init(void) /* read MAC addr from EEPROM */ for (i = 0 ; i < 3 ; i++) { - ctrl_outw(0x0, EEPROM_OP); /* read */ - ctrl_outw(i*2, EEPROM_ADR); - ctrl_outw(0x1, EEPROM_STRT); + __raw_writew(0x0, EEPROM_OP); /* read */ + __raw_writew(i*2, EEPROM_ADR); + __raw_writew(0x1, EEPROM_STRT); if (!sh_eth_is_eeprom_ready()) return; - mac = ctrl_inw(EEPROM_DATA); + mac = __raw_readw(EEPROM_DATA); sh_eth_plat.mac_addr[i << 1] = mac & 0xff; sh_eth_plat.mac_addr[(i << 1) + 1] = mac >> 8; } @@ -585,7 +585,7 @@ arch_initcall(arch_setup); static int __init devices_setup(void) { - u16 sw = ctrl_inw(SW4140); /* select camera, monitor */ + u16 sw = __raw_readw(SW4140); /* select camera, monitor */ struct clk *fsia_clk; /* register board specific self-refresh code */ @@ -595,7 +595,7 @@ static int __init devices_setup(void) &ms7724se_sdram_leave_start, &ms7724se_sdram_leave_end); /* Reset Release */ - ctrl_outw(ctrl_inw(FPGA_OUT) & + __raw_writew(__raw_readw(FPGA_OUT) & ~((1 << 1) | /* LAN */ (1 << 6) | /* VIDEO DAC */ (1 << 7) | /* AK4643 */ @@ -604,7 +604,7 @@ static int __init devices_setup(void) FPGA_OUT); /* turn on USB clocks, use external clock */ - ctrl_outw((ctrl_inw(PORT_MSELCRB) & ~0xc000) | 0x8000, PORT_MSELCRB); + __raw_writew((__raw_readw(PORT_MSELCRB) & ~0xc000) | 0x8000, PORT_MSELCRB); #ifdef CONFIG_PM /* Let LED9 show STATUS2 */ @@ -633,10 +633,10 @@ static int __init devices_setup(void) #endif /* enable USB0 port */ - ctrl_outw(0x0600, 0xa40501d4); + __raw_writew(0x0600, 0xa40501d4); /* enable USB1 port */ - ctrl_outw(0x0600, 0xa4050192); + __raw_writew(0x0600, 0xa4050192); /* enable IRQ 0,1,2 */ gpio_request(GPIO_FN_INTC_IRQ0, NULL); @@ -684,7 +684,7 @@ static int __init devices_setup(void) gpio_request(GPIO_FN_LCDVCPWC, NULL); gpio_request(GPIO_FN_LCDRD, NULL); gpio_request(GPIO_FN_LCDLCLK, NULL); - ctrl_outw((ctrl_inw(PORT_HIZA) & ~0x0001), PORT_HIZA); + __raw_writew((__raw_readw(PORT_HIZA) & ~0x0001), PORT_HIZA); /* enable CEU0 */ gpio_request(GPIO_FN_VIO0_D15, NULL); diff --git a/arch/sh/boards/mach-se/7780/irq.c b/arch/sh/boards/mach-se/7780/irq.c index 121744c08714..d5c9edc172a3 100644 --- a/arch/sh/boards/mach-se/7780/irq.c +++ b/arch/sh/boards/mach-se/7780/irq.c @@ -24,30 +24,30 @@ void __init init_se7780_IRQ(void) { /* enable all interrupt at FPGA */ - ctrl_outw(0, FPGA_INTMSK1); + __raw_writew(0, FPGA_INTMSK1); /* mask SM501 interrupt */ - ctrl_outw((ctrl_inw(FPGA_INTMSK1) | 0x0002), FPGA_INTMSK1); + __raw_writew((__raw_readw(FPGA_INTMSK1) | 0x0002), FPGA_INTMSK1); /* enable all interrupt at FPGA */ - ctrl_outw(0, FPGA_INTMSK2); + __raw_writew(0, FPGA_INTMSK2); /* set FPGA INTSEL register */ /* FPGA + 0x06 */ - ctrl_outw( ((IRQPIN_SM501 << IRQPOS_SM501) | + __raw_writew( ((IRQPIN_SM501 << IRQPOS_SM501) | (IRQPIN_SMC91CX << IRQPOS_SMC91CX)), FPGA_INTSEL1); /* FPGA + 0x08 */ - ctrl_outw(((IRQPIN_EXTINT4 << IRQPOS_EXTINT4) | + __raw_writew(((IRQPIN_EXTINT4 << IRQPOS_EXTINT4) | (IRQPIN_EXTINT3 << IRQPOS_EXTINT3) | (IRQPIN_EXTINT2 << IRQPOS_EXTINT2) | (IRQPIN_EXTINT1 << IRQPOS_EXTINT1)), FPGA_INTSEL2); /* FPGA + 0x0A */ - ctrl_outw((IRQPIN_PCCPW << IRQPOS_PCCPW), FPGA_INTSEL3); + __raw_writew((IRQPIN_PCCPW << IRQPOS_PCCPW), FPGA_INTSEL3); plat_irq_setup_pins(IRQ_MODE_IRQ); /* install handlers for IRQ0-7 */ /* ICR1: detect low level(for 2ndcut) */ - ctrl_outl(0xAAAA0000, INTC_ICR1); + __raw_writel(0xAAAA0000, INTC_ICR1); /* * FPGA PCISEL register initialize @@ -63,6 +63,6 @@ void __init init_se7780_IRQ(void) * INTD || INTD | INTC | -- | INTA * ------------------------------------- */ - ctrl_outw(0x0013, FPGA_PCI_INTSEL1); - ctrl_outw(0xE402, FPGA_PCI_INTSEL2); + __raw_writew(0x0013, FPGA_PCI_INTSEL1); + __raw_writew(0xE402, FPGA_PCI_INTSEL2); } diff --git a/arch/sh/boards/mach-se/7780/setup.c b/arch/sh/boards/mach-se/7780/setup.c index f7bfb3f83692..6f7c207138e1 100644 --- a/arch/sh/boards/mach-se/7780/setup.c +++ b/arch/sh/boards/mach-se/7780/setup.c @@ -75,14 +75,14 @@ device_initcall(se7780_devices_setup); static void __init se7780_setup(char **cmdline_p) { /* "SH-Linux" on LED Display */ - ctrl_outw( 'S' , PA_LED_DISP + (DISP_SEL0_ADDR << 1) ); - ctrl_outw( 'H' , PA_LED_DISP + (DISP_SEL1_ADDR << 1) ); - ctrl_outw( '-' , PA_LED_DISP + (DISP_SEL2_ADDR << 1) ); - ctrl_outw( 'L' , PA_LED_DISP + (DISP_SEL3_ADDR << 1) ); - ctrl_outw( 'i' , PA_LED_DISP + (DISP_SEL4_ADDR << 1) ); - ctrl_outw( 'n' , PA_LED_DISP + (DISP_SEL5_ADDR << 1) ); - ctrl_outw( 'u' , PA_LED_DISP + (DISP_SEL6_ADDR << 1) ); - ctrl_outw( 'x' , PA_LED_DISP + (DISP_SEL7_ADDR << 1) ); + __raw_writew( 'S' , PA_LED_DISP + (DISP_SEL0_ADDR << 1) ); + __raw_writew( 'H' , PA_LED_DISP + (DISP_SEL1_ADDR << 1) ); + __raw_writew( '-' , PA_LED_DISP + (DISP_SEL2_ADDR << 1) ); + __raw_writew( 'L' , PA_LED_DISP + (DISP_SEL3_ADDR << 1) ); + __raw_writew( 'i' , PA_LED_DISP + (DISP_SEL4_ADDR << 1) ); + __raw_writew( 'n' , PA_LED_DISP + (DISP_SEL5_ADDR << 1) ); + __raw_writew( 'u' , PA_LED_DISP + (DISP_SEL6_ADDR << 1) ); + __raw_writew( 'x' , PA_LED_DISP + (DISP_SEL7_ADDR << 1) ); printk(KERN_INFO "Hitachi UL Solutions Engine 7780SE03 support.\n"); @@ -93,15 +93,15 @@ static void __init se7780_setup(char **cmdline_p) * REQ2/GNT2 -> Serial ATA * REQ3/GNT3 -> PCI slot */ - ctrl_outw(0x0213, FPGA_REQSEL); + __raw_writew(0x0213, FPGA_REQSEL); /* GPIO setting */ - ctrl_outw(0x0000, GPIO_PECR); - ctrl_outw(ctrl_inw(GPIO_PHCR)&0xfff3, GPIO_PHCR); - ctrl_outw(0x0c00, GPIO_PMSELR); + __raw_writew(0x0000, GPIO_PECR); + __raw_writew(__raw_readw(GPIO_PHCR)&0xfff3, GPIO_PHCR); + __raw_writew(0x0c00, GPIO_PMSELR); /* iVDR Power ON */ - ctrl_outw(0x0001, FPGA_IVDRPW); + __raw_writew(0x0001, FPGA_IVDRPW); } /* diff --git a/arch/sh/boards/mach-sh03/rtc.c b/arch/sh/boards/mach-sh03/rtc.c index a8b9f844ab5b..1b200990500c 100644 --- a/arch/sh/boards/mach-sh03/rtc.c +++ b/arch/sh/boards/mach-sh03/rtc.c @@ -44,15 +44,15 @@ unsigned long get_cmos_time(void) spin_lock(&sh03_rtc_lock); again: do { - sec = (ctrl_inb(RTC_SEC1) & 0xf) + (ctrl_inb(RTC_SEC10) & 0x7) * 10; - min = (ctrl_inb(RTC_MIN1) & 0xf) + (ctrl_inb(RTC_MIN10) & 0xf) * 10; - hour = (ctrl_inb(RTC_HOU1) & 0xf) + (ctrl_inb(RTC_HOU10) & 0xf) * 10; - day = (ctrl_inb(RTC_DAY1) & 0xf) + (ctrl_inb(RTC_DAY10) & 0xf) * 10; - mon = (ctrl_inb(RTC_MON1) & 0xf) + (ctrl_inb(RTC_MON10) & 0xf) * 10; - year = (ctrl_inb(RTC_YEA1) & 0xf) + (ctrl_inb(RTC_YEA10) & 0xf) * 10 - + (ctrl_inb(RTC_YEA100 ) & 0xf) * 100 - + (ctrl_inb(RTC_YEA1000) & 0xf) * 1000; - } while (sec != (ctrl_inb(RTC_SEC1) & 0xf) + (ctrl_inb(RTC_SEC10) & 0x7) * 10); + sec = (__raw_readb(RTC_SEC1) & 0xf) + (__raw_readb(RTC_SEC10) & 0x7) * 10; + min = (__raw_readb(RTC_MIN1) & 0xf) + (__raw_readb(RTC_MIN10) & 0xf) * 10; + hour = (__raw_readb(RTC_HOU1) & 0xf) + (__raw_readb(RTC_HOU10) & 0xf) * 10; + day = (__raw_readb(RTC_DAY1) & 0xf) + (__raw_readb(RTC_DAY10) & 0xf) * 10; + mon = (__raw_readb(RTC_MON1) & 0xf) + (__raw_readb(RTC_MON10) & 0xf) * 10; + year = (__raw_readb(RTC_YEA1) & 0xf) + (__raw_readb(RTC_YEA10) & 0xf) * 10 + + (__raw_readb(RTC_YEA100 ) & 0xf) * 100 + + (__raw_readb(RTC_YEA1000) & 0xf) * 1000; + } while (sec != (__raw_readb(RTC_SEC1) & 0xf) + (__raw_readb(RTC_SEC10) & 0x7) * 10); if (year == 0 || mon < 1 || mon > 12 || day > 31 || day < 1 || hour > 23 || min > 59 || sec > 59) { printk(KERN_ERR @@ -60,16 +60,16 @@ unsigned long get_cmos_time(void) printk("year=%d, mon=%d, day=%d, hour=%d, min=%d, sec=%d\n", year, mon, day, hour, min, sec); - ctrl_outb(0, RTC_SEC1); ctrl_outb(0, RTC_SEC10); - ctrl_outb(0, RTC_MIN1); ctrl_outb(0, RTC_MIN10); - ctrl_outb(0, RTC_HOU1); ctrl_outb(0, RTC_HOU10); - ctrl_outb(6, RTC_WEE1); - ctrl_outb(1, RTC_DAY1); ctrl_outb(0, RTC_DAY10); - ctrl_outb(1, RTC_MON1); ctrl_outb(0, RTC_MON10); - ctrl_outb(0, RTC_YEA1); ctrl_outb(0, RTC_YEA10); - ctrl_outb(0, RTC_YEA100); - ctrl_outb(2, RTC_YEA1000); - ctrl_outb(0, RTC_CTL); + __raw_writeb(0, RTC_SEC1); __raw_writeb(0, RTC_SEC10); + __raw_writeb(0, RTC_MIN1); __raw_writeb(0, RTC_MIN10); + __raw_writeb(0, RTC_HOU1); __raw_writeb(0, RTC_HOU10); + __raw_writeb(6, RTC_WEE1); + __raw_writeb(1, RTC_DAY1); __raw_writeb(0, RTC_DAY10); + __raw_writeb(1, RTC_MON1); __raw_writeb(0, RTC_MON10); + __raw_writeb(0, RTC_YEA1); __raw_writeb(0, RTC_YEA10); + __raw_writeb(0, RTC_YEA100); + __raw_writeb(2, RTC_YEA1000); + __raw_writeb(0, RTC_CTL); goto again; } @@ -93,9 +93,9 @@ static int set_rtc_mmss(unsigned long nowtime) /* gets recalled with irq locally disabled */ spin_lock(&sh03_rtc_lock); for (i = 0 ; i < 1000000 ; i++) /* may take up to 1 second... */ - if (!(ctrl_inb(RTC_CTL) & RTC_BUSY)) + if (!(__raw_readb(RTC_CTL) & RTC_BUSY)) break; - cmos_minutes = (ctrl_inb(RTC_MIN1) & 0xf) + (ctrl_inb(RTC_MIN10) & 0xf) * 10; + cmos_minutes = (__raw_readb(RTC_MIN1) & 0xf) + (__raw_readb(RTC_MIN10) & 0xf) * 10; real_seconds = nowtime % 60; real_minutes = nowtime / 60; if (((abs(real_minutes - cmos_minutes) + 15)/30) & 1) @@ -103,10 +103,10 @@ static int set_rtc_mmss(unsigned long nowtime) real_minutes %= 60; if (abs(real_minutes - cmos_minutes) < 30) { - ctrl_outb(real_seconds % 10, RTC_SEC1); - ctrl_outb(real_seconds / 10, RTC_SEC10); - ctrl_outb(real_minutes % 10, RTC_MIN1); - ctrl_outb(real_minutes / 10, RTC_MIN10); + __raw_writeb(real_seconds % 10, RTC_SEC1); + __raw_writeb(real_seconds / 10, RTC_SEC10); + __raw_writeb(real_minutes % 10, RTC_MIN1); + __raw_writeb(real_minutes / 10, RTC_MIN10); } else { printk(KERN_WARNING "set_rtc_mmss: can't update from %d to %d\n", diff --git a/arch/sh/boards/mach-sh7763rdp/irq.c b/arch/sh/boards/mach-sh7763rdp/irq.c index d8ebfa7d8c76..add698c8f2b4 100644 --- a/arch/sh/boards/mach-sh7763rdp/irq.c +++ b/arch/sh/boards/mach-sh7763rdp/irq.c @@ -28,18 +28,18 @@ void __init init_sh7763rdp_IRQ(void) { /* GPIO enabled */ - ctrl_outl(1 << 25, INTC_INT2MSKCR); + __raw_writel(1 << 25, INTC_INT2MSKCR); /* enable GPIO interrupts */ - ctrl_outl((ctrl_inl(INTC_INT2PRI7) & 0xFF00FFFF) | 0x000F0000, + __raw_writel((__raw_readl(INTC_INT2PRI7) & 0xFF00FFFF) | 0x000F0000, INTC_INT2PRI7); /* USBH enabled */ - ctrl_outl(1 << 17, INTC_INT2MSKCR1); + __raw_writel(1 << 17, INTC_INT2MSKCR1); /* GETHER enabled */ - ctrl_outl(1 << 16, INTC_INT2MSKCR1); + __raw_writel(1 << 16, INTC_INT2MSKCR1); /* DMAC enabled */ - ctrl_outl(1 << 8, INTC_INT2MSKCR); + __raw_writel(1 << 8, INTC_INT2MSKCR); } diff --git a/arch/sh/boards/mach-sh7763rdp/setup.c b/arch/sh/boards/mach-sh7763rdp/setup.c index 390534a0b35c..f64a6918224c 100644 --- a/arch/sh/boards/mach-sh7763rdp/setup.c +++ b/arch/sh/boards/mach-sh7763rdp/setup.c @@ -158,50 +158,50 @@ device_initcall(sh7763rdp_devices_setup); static void __init sh7763rdp_setup(char **cmdline_p) { /* Board version check */ - if (ctrl_inw(CPLD_BOARD_ID_ERV_REG) == 0xECB1) + if (__raw_readw(CPLD_BOARD_ID_ERV_REG) == 0xECB1) printk(KERN_INFO "RTE Standard Configuration\n"); else printk(KERN_INFO "RTA Standard Configuration\n"); /* USB pin select bits (clear bit 5-2 to 0) */ - ctrl_outw((ctrl_inw(PORT_PSEL2) & 0xFFC3), PORT_PSEL2); + __raw_writew((__raw_readw(PORT_PSEL2) & 0xFFC3), PORT_PSEL2); /* USBH setup port I controls to other (clear bits 4-9 to 0) */ - ctrl_outw(ctrl_inw(PORT_PICR) & 0xFC0F, PORT_PICR); + __raw_writew(__raw_readw(PORT_PICR) & 0xFC0F, PORT_PICR); /* Select USB Host controller */ - ctrl_outw(0x00, USB_USBHSC); + __raw_writew(0x00, USB_USBHSC); /* For LCD */ /* set PTJ7-1, bits 15-2 of PJCR to 0 */ - ctrl_outw(ctrl_inw(PORT_PJCR) & 0x0003, PORT_PJCR); + __raw_writew(__raw_readw(PORT_PJCR) & 0x0003, PORT_PJCR); /* set PTI5, bits 11-10 of PICR to 0 */ - ctrl_outw(ctrl_inw(PORT_PICR) & 0xF3FF, PORT_PICR); - ctrl_outw(0, PORT_PKCR); - ctrl_outw(0, PORT_PLCR); + __raw_writew(__raw_readw(PORT_PICR) & 0xF3FF, PORT_PICR); + __raw_writew(0, PORT_PKCR); + __raw_writew(0, PORT_PLCR); /* set PSEL2 bits 14-8, 5-4, of PSEL2 to 0 */ - ctrl_outw((ctrl_inw(PORT_PSEL2) & 0x00C0), PORT_PSEL2); + __raw_writew((__raw_readw(PORT_PSEL2) & 0x00C0), PORT_PSEL2); /* set PSEL3 bits 14-12, 6-4, 2-0 of PSEL3 to 0 */ - ctrl_outw((ctrl_inw(PORT_PSEL3) & 0x0700), PORT_PSEL3); + __raw_writew((__raw_readw(PORT_PSEL3) & 0x0700), PORT_PSEL3); /* For HAC */ /* bit3-0 0100:HAC & SSI1 enable */ - ctrl_outw((ctrl_inw(PORT_PSEL1) & 0xFFF0) | 0x0004, PORT_PSEL1); + __raw_writew((__raw_readw(PORT_PSEL1) & 0xFFF0) | 0x0004, PORT_PSEL1); /* bit14 1:SSI_HAC_CLK enable */ - ctrl_outw(ctrl_inw(PORT_PSEL4) | 0x4000, PORT_PSEL4); + __raw_writew(__raw_readw(PORT_PSEL4) | 0x4000, PORT_PSEL4); /* SH-Ether */ - ctrl_outw((ctrl_inw(PORT_PSEL1) & ~0xff00) | 0x2400, PORT_PSEL1); - ctrl_outw(0x0, PORT_PFCR); - ctrl_outw(0x0, PORT_PFCR); - ctrl_outw(0x0, PORT_PFCR); + __raw_writew((__raw_readw(PORT_PSEL1) & ~0xff00) | 0x2400, PORT_PSEL1); + __raw_writew(0x0, PORT_PFCR); + __raw_writew(0x0, PORT_PFCR); + __raw_writew(0x0, PORT_PFCR); /* MMC */ /*selects SCIF and MMC other functions */ - ctrl_outw(0x0001, PORT_PSEL0); + __raw_writew(0x0001, PORT_PSEL0); /* MMC clock operates */ - ctrl_outl(ctrl_inl(MSTPCR1) & ~0x8, MSTPCR1); - ctrl_outw(ctrl_inw(PORT_PACR) & ~0x3000, PORT_PACR); - ctrl_outw(ctrl_inw(PORT_PCCR) & ~0xCFC3, PORT_PCCR); + __raw_writel(__raw_readl(MSTPCR1) & ~0x8, MSTPCR1); + __raw_writew(__raw_readw(PORT_PACR) & ~0x3000, PORT_PACR); + __raw_writew(__raw_readw(PORT_PCCR) & ~0xCFC3, PORT_PCCR); } static struct sh_machine_vector mv_sh7763rdp __initmv = { diff --git a/arch/sh/boards/mach-snapgear/setup.c b/arch/sh/boards/mach-snapgear/setup.c index a3277a23cf14..331745dee379 100644 --- a/arch/sh/boards/mach-snapgear/setup.c +++ b/arch/sh/boards/mach-snapgear/setup.c @@ -30,7 +30,7 @@ static irqreturn_t eraseconfig_interrupt(int irq, void *dev_id) { - (void)ctrl_inb(0xb8000000); /* dummy read */ + (void)__raw_readb(0xb8000000); /* dummy read */ printk("SnapGear: erase switch interrupt!\n"); diff --git a/arch/sh/boards/mach-systemh/irq.c b/arch/sh/boards/mach-systemh/irq.c index 986a0e71d220..523aea5dc94e 100644 --- a/arch/sh/boards/mach-systemh/irq.c +++ b/arch/sh/boards/mach-systemh/irq.c @@ -41,13 +41,13 @@ static void disable_systemh_irq(unsigned int irq) unsigned long val, mask = 0x01 << 1; /* Clear the "irq"th bit in the mask and set it in the request */ - val = ctrl_inl((unsigned long)systemh_irq_mask_register); + val = __raw_readl((unsigned long)systemh_irq_mask_register); val &= ~mask; - ctrl_outl(val, (unsigned long)systemh_irq_mask_register); + __raw_writel(val, (unsigned long)systemh_irq_mask_register); - val = ctrl_inl((unsigned long)systemh_irq_request_register); + val = __raw_readl((unsigned long)systemh_irq_request_register); val |= mask; - ctrl_outl(val, (unsigned long)systemh_irq_request_register); + __raw_writel(val, (unsigned long)systemh_irq_request_register); } } @@ -57,9 +57,9 @@ static void enable_systemh_irq(unsigned int irq) unsigned long val, mask = 0x01 << 1; /* Set "irq"th bit in the mask register */ - val = ctrl_inl((unsigned long)systemh_irq_mask_register); + val = __raw_readl((unsigned long)systemh_irq_mask_register); val |= mask; - ctrl_outl(val, (unsigned long)systemh_irq_mask_register); + __raw_writel(val, (unsigned long)systemh_irq_mask_register); } } diff --git a/arch/sh/boards/mach-titan/io.c b/arch/sh/boards/mach-titan/io.c index 0130e9826aca..29754c5091f0 100644 --- a/arch/sh/boards/mach-titan/io.c +++ b/arch/sh/boards/mach-titan/io.c @@ -16,8 +16,8 @@ static inline unsigned int port2adr(unsigned int port) u8 titan_inb(unsigned long port) { if (PXSEG(port)) - return ctrl_inb(port); - return ctrl_inw(port2adr(port)) & 0xff; + return __raw_readb(port); + return __raw_readw(port2adr(port)) & 0xff; } u8 titan_inb_p(unsigned long port) @@ -25,9 +25,9 @@ u8 titan_inb_p(unsigned long port) u8 v; if (PXSEG(port)) - v = ctrl_inb(port); + v = __raw_readb(port); else - v = ctrl_inw(port2adr(port)) & 0xff; + v = __raw_readw(port2adr(port)) & 0xff; ctrl_delay(); return v; } @@ -35,9 +35,9 @@ u8 titan_inb_p(unsigned long port) u16 titan_inw(unsigned long port) { if (PXSEG(port)) - return ctrl_inw(port); + return __raw_readw(port); else if (port >= 0x2000) - return ctrl_inw(port2adr(port)); + return __raw_readw(port2adr(port)); else maybebadio(port); return 0; @@ -46,9 +46,9 @@ u16 titan_inw(unsigned long port) u32 titan_inl(unsigned long port) { if (PXSEG(port)) - return ctrl_inl(port); + return __raw_readl(port); else if (port >= 0x2000) - return ctrl_inw(port2adr(port)); + return __raw_readw(port2adr(port)); else maybebadio(port); return 0; @@ -57,26 +57,26 @@ u32 titan_inl(unsigned long port) void titan_outb(u8 value, unsigned long port) { if (PXSEG(port)) - ctrl_outb(value, port); + __raw_writeb(value, port); else - ctrl_outw(value, port2adr(port)); + __raw_writew(value, port2adr(port)); } void titan_outb_p(u8 value, unsigned long port) { if (PXSEG(port)) - ctrl_outb(value, port); + __raw_writeb(value, port); else - ctrl_outw(value, port2adr(port)); + __raw_writew(value, port2adr(port)); ctrl_delay(); } void titan_outw(u16 value, unsigned long port) { if (PXSEG(port)) - ctrl_outw(value, port); + __raw_writew(value, port); else if (port >= 0x2000) - ctrl_outw(value, port2adr(port)); + __raw_writew(value, port2adr(port)); else maybebadio(port); } @@ -84,7 +84,7 @@ void titan_outw(u16 value, unsigned long port) void titan_outl(u32 value, unsigned long port) { if (PXSEG(port)) - ctrl_outl(value, port); + __raw_writel(value, port); else maybebadio(port); } diff --git a/arch/sh/boards/mach-x3proto/ilsel.c b/arch/sh/boards/mach-x3proto/ilsel.c index b5c673c39337..5c9842704c60 100644 --- a/arch/sh/boards/mach-x3proto/ilsel.c +++ b/arch/sh/boards/mach-x3proto/ilsel.c @@ -70,10 +70,10 @@ static void __ilsel_enable(ilsel_source_t set, unsigned int bit) pr_debug("%s: bit#%d: addr - 0x%08lx (shift %d, set %d)\n", __func__, bit, addr, shift, set); - tmp = ctrl_inw(addr); + tmp = __raw_readw(addr); tmp &= ~(0xf << shift); tmp |= set << shift; - ctrl_outw(tmp, addr); + __raw_writew(tmp, addr); } /** @@ -142,9 +142,9 @@ void ilsel_disable(unsigned int irq) addr = mk_ilsel_addr(irq); - tmp = ctrl_inw(addr); + tmp = __raw_readw(addr); tmp &= ~(0xf << mk_ilsel_shift(irq)); - ctrl_outw(tmp, addr); + __raw_writew(tmp, addr); clear_bit(irq, &ilsel_level_map); } diff --git a/arch/sh/boards/mach-x3proto/setup.c b/arch/sh/boards/mach-x3proto/setup.c index efe4cb9f8a77..e284592fd42a 100644 --- a/arch/sh/boards/mach-x3proto/setup.c +++ b/arch/sh/boards/mach-x3proto/setup.c @@ -149,7 +149,7 @@ static void __init x3proto_init_irq(void) plat_irq_setup_pins(IRQ_MODE_IRL3210); /* Set ICR0.LVLMODE */ - ctrl_outl(ctrl_inl(0xfe410000) | (1 << 21), 0xfe410000); + __raw_writel(__raw_readl(0xfe410000) | (1 << 21), 0xfe410000); } static struct sh_machine_vector mv_x3proto __initmv = { |
