summaryrefslogtreecommitdiffstats
path: root/arch/sh/boards
diff options
context:
space:
mode:
Diffstat (limited to 'arch/sh/boards')
-rw-r--r--arch/sh/boards/Makefile1
-rw-r--r--arch/sh/boards/mach-ap325rxa/Makefile2
-rw-r--r--arch/sh/boards/mach-ap325rxa/sdram.S69
-rw-r--r--arch/sh/boards/mach-ap325rxa/setup.c (renamed from arch/sh/boards/board-ap325rxa.c)97
-rw-r--r--arch/sh/boards/mach-ecovec24/Makefile2
-rw-r--r--arch/sh/boards/mach-ecovec24/sdram.S52
-rw-r--r--arch/sh/boards/mach-ecovec24/setup.c197
-rw-r--r--arch/sh/boards/mach-highlander/setup.c2
-rw-r--r--arch/sh/boards/mach-kfr2r09/Makefile2
-rw-r--r--arch/sh/boards/mach-kfr2r09/sdram.S80
-rw-r--r--arch/sh/boards/mach-kfr2r09/setup.c238
-rw-r--r--arch/sh/boards/mach-migor/Makefile2
-rw-r--r--arch/sh/boards/mach-migor/sdram.S69
-rw-r--r--arch/sh/boards/mach-migor/setup.c65
-rw-r--r--arch/sh/boards/mach-r2d/irq.c2
-rw-r--r--arch/sh/boards/mach-se/7722/irq.c32
-rw-r--r--arch/sh/boards/mach-se/7722/setup.c17
-rw-r--r--arch/sh/boards/mach-se/7724/Makefile2
-rw-r--r--arch/sh/boards/mach-se/7724/sdram.S52
-rw-r--r--arch/sh/boards/mach-se/7724/setup.c96
20 files changed, 939 insertions, 140 deletions
diff --git a/arch/sh/boards/Makefile b/arch/sh/boards/Makefile
index 7baa21090231..ce0f26381784 100644
--- a/arch/sh/boards/Makefile
+++ b/arch/sh/boards/Makefile
@@ -1,7 +1,6 @@
#
# Specific board support, not covered by a mach group.
#
-obj-$(CONFIG_SH_AP325RXA) += board-ap325rxa.o
obj-$(CONFIG_SH_MAGIC_PANEL_R2) += board-magicpanelr2.o
obj-$(CONFIG_SH_SH7785LCR) += board-sh7785lcr.o
obj-$(CONFIG_SH_URQUELL) += board-urquell.o
diff --git a/arch/sh/boards/mach-ap325rxa/Makefile b/arch/sh/boards/mach-ap325rxa/Makefile
new file mode 100644
index 000000000000..4cf1774d2613
--- /dev/null
+++ b/arch/sh/boards/mach-ap325rxa/Makefile
@@ -0,0 +1,2 @@
+obj-y := setup.o sdram.o
+
diff --git a/arch/sh/boards/mach-ap325rxa/sdram.S b/arch/sh/boards/mach-ap325rxa/sdram.S
new file mode 100644
index 000000000000..db24fbed4fca
--- /dev/null
+++ b/arch/sh/boards/mach-ap325rxa/sdram.S
@@ -0,0 +1,69 @@
+/*
+ * AP325RXA sdram self/auto-refresh setup code
+ *
+ * Copyright (C) 2009 Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/sys.h>
+#include <linux/errno.h>
+#include <linux/linkage.h>
+#include <asm/asm-offsets.h>
+#include <asm/suspend.h>
+#include <asm/romimage-macros.h>
+
+/* code to enter and leave self-refresh. must be self-contained.
+ * this code will be copied to on-chip memory and executed from there.
+ */
+ .balign 4
+ENTRY(ap325rxa_sdram_enter_start)
+
+ /* SBSC: disable power down and put in self-refresh mode */
+ mov.l 1f, r4
+ mov.l 2f, r1
+ mov.l @r4, r2
+ or r1, r2
+ mov.l 3f, r3
+ and r3, r2
+ mov.l r2, @r4
+
+ rts
+ nop
+
+ .balign 4
+1: .long 0xfe400008 /* SDCR0 */
+2: .long 0x00000400
+3: .long 0xffff7fff
+ENTRY(ap325rxa_sdram_enter_end)
+
+ .balign 4
+ENTRY(ap325rxa_sdram_leave_start)
+
+ /* SBSC: set auto-refresh mode */
+ mov.l 1f, r4
+ mov.l @r4, r0
+ mov.l 4f, r1
+ and r1, r0
+ mov.l r0, @r4
+ mov.l 6f, r4
+ mov.l 8f, r0
+ mov.l @r4, r1
+ mov #-1, r4
+ add r4, r1
+ or r1, r0
+ mov.l 7f, r1
+ mov.l r0, @r1
+
+ rts
+ nop
+
+ .balign 4
+1: .long 0xfe400008 /* SDCR0 */
+4: .long 0xfffffbff
+6: .long 0xfe40001c /* RTCOR */
+7: .long 0xfe400018 /* RTCNT */
+8: .long 0xa55a0000
+ENTRY(ap325rxa_sdram_leave_end)
diff --git a/arch/sh/boards/board-ap325rxa.c b/arch/sh/boards/mach-ap325rxa/setup.c
index 2d080732a964..cf9dc12dfeb1 100644
--- a/arch/sh/boards/board-ap325rxa.c
+++ b/arch/sh/boards/mach-ap325rxa/setup.c
@@ -20,8 +20,6 @@
#include <linux/i2c.h>
#include <linux/smsc911x.h>
#include <linux/gpio.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/spi_gpio.h>
#include <media/ov772x.h>
#include <media/soc_camera.h>
#include <media/soc_camera_platform.h>
@@ -29,6 +27,7 @@
#include <video/sh_mobile_lcdc.h>
#include <asm/io.h>
#include <asm/clock.h>
+#include <asm/suspend.h>
#include <cpu/sh7723.h>
static struct smsc911x_platform_config smsc911x_config = {
@@ -409,17 +408,49 @@ static struct platform_device ceu_device = {
},
};
-struct spi_gpio_platform_data sdcard_cn3_platform_data = {
- .sck = GPIO_PTD0,
- .mosi = GPIO_PTD1,
- .miso = GPIO_PTD2,
- .num_chipselect = 1,
+static struct resource sdhi0_cn3_resources[] = {
+ [0] = {
+ .name = "SDHI0",
+ .start = 0x04ce0000,
+ .end = 0x04ce01ff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 101,
+ .flags = IORESOURCE_IRQ,
+ },
};
-static struct platform_device sdcard_cn3_device = {
- .name = "spi_gpio",
- .dev = {
- .platform_data = &sdcard_cn3_platform_data,
+static struct platform_device sdhi0_cn3_device = {
+ .name = "sh_mobile_sdhi",
+ .id = 0, /* "sdhi0" clock */
+ .num_resources = ARRAY_SIZE(sdhi0_cn3_resources),
+ .resource = sdhi0_cn3_resources,
+ .archdata = {
+ .hwblk_id = HWBLK_SDHI0,
+ },
+};
+
+static struct resource sdhi1_cn7_resources[] = {
+ [0] = {
+ .name = "SDHI1",
+ .start = 0x04cf0000,
+ .end = 0x04cf01ff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 24,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device sdhi1_cn7_device = {
+ .name = "sh_mobile_sdhi",
+ .id = 1, /* "sdhi1" clock */
+ .num_resources = ARRAY_SIZE(sdhi1_cn7_resources),
+ .resource = sdhi1_cn7_resources,
+ .archdata = {
+ .hwblk_id = HWBLK_SDHI1,
},
};
@@ -470,22 +501,26 @@ static struct platform_device *ap325rxa_devices[] __initdata = {
&lcdc_device,
&ceu_device,
&nand_flash_device,
- &sdcard_cn3_device,
+ &sdhi0_cn3_device,
+ &sdhi1_cn7_device,
&ap325rxa_camera[0],
&ap325rxa_camera[1],
};
-static struct spi_board_info ap325rxa_spi_devices[] = {
- {
- .modalias = "mmc_spi",
- .max_speed_hz = 5000000,
- .chip_select = 0,
- .controller_data = (void *) GPIO_PTD5,
- },
-};
+extern char ap325rxa_sdram_enter_start;
+extern char ap325rxa_sdram_enter_end;
+extern char ap325rxa_sdram_leave_start;
+extern char ap325rxa_sdram_leave_end;
static int __init ap325rxa_devices_setup(void)
{
+ /* register board specific self-refresh code */
+ sh_mobile_register_self_refresh(SUSP_SH_STANDBY | SUSP_SH_SF,
+ &ap325rxa_sdram_enter_start,
+ &ap325rxa_sdram_enter_end,
+ &ap325rxa_sdram_leave_start,
+ &ap325rxa_sdram_leave_end);
+
/* LD3 and LD4 LEDs */
gpio_request(GPIO_PTX5, NULL); /* RUN */
gpio_direction_output(GPIO_PTX5, 1);
@@ -578,12 +613,28 @@ static int __init ap325rxa_devices_setup(void)
platform_resource_setup_memory(&ceu_device, "ceu", 4 << 20);
+ /* SDHI0 - CN3 - SD CARD */
+ gpio_request(GPIO_FN_SDHI0CD_PTD, NULL);
+ gpio_request(GPIO_FN_SDHI0WP_PTD, NULL);
+ gpio_request(GPIO_FN_SDHI0D3_PTD, NULL);
+ gpio_request(GPIO_FN_SDHI0D2_PTD, NULL);
+ gpio_request(GPIO_FN_SDHI0D1_PTD, NULL);
+ gpio_request(GPIO_FN_SDHI0D0_PTD, NULL);
+ gpio_request(GPIO_FN_SDHI0CMD_PTD, NULL);
+ gpio_request(GPIO_FN_SDHI0CLK_PTD, NULL);
+
+ /* SDHI1 - CN7 - MICRO SD CARD */
+ gpio_request(GPIO_FN_SDHI1CD, NULL);
+ gpio_request(GPIO_FN_SDHI1D3, NULL);
+ gpio_request(GPIO_FN_SDHI1D2, NULL);
+ gpio_request(GPIO_FN_SDHI1D1, NULL);
+ gpio_request(GPIO_FN_SDHI1D0, NULL);
+ gpio_request(GPIO_FN_SDHI1CMD, NULL);
+ gpio_request(GPIO_FN_SDHI1CLK, NULL);
+
i2c_register_board_info(0, ap325rxa_i2c_devices,
ARRAY_SIZE(ap325rxa_i2c_devices));
- spi_register_board_info(ap325rxa_spi_devices,
- ARRAY_SIZE(ap325rxa_spi_devices));
-
return platform_add_devices(ap325rxa_devices,
ARRAY_SIZE(ap325rxa_devices));
}
diff --git a/arch/sh/boards/mach-ecovec24/Makefile b/arch/sh/boards/mach-ecovec24/Makefile
index 51f852151655..e69bc82208fc 100644
--- a/arch/sh/boards/mach-ecovec24/Makefile
+++ b/arch/sh/boards/mach-ecovec24/Makefile
@@ -6,4 +6,4 @@
# for more details.
#
-obj-y := setup.o \ No newline at end of file
+obj-y := setup.o sdram.o \ No newline at end of file
diff --git a/arch/sh/boards/mach-ecovec24/sdram.S b/arch/sh/boards/mach-ecovec24/sdram.S
new file mode 100644
index 000000000000..833440044407
--- /dev/null
+++ b/arch/sh/boards/mach-ecovec24/sdram.S
@@ -0,0 +1,52 @@
+/*
+ * Ecovec24 sdram self/auto-refresh setup code
+ *
+ * Copyright (C) 2009 Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/sys.h>
+#include <linux/errno.h>
+#include <linux/linkage.h>
+#include <asm/asm-offsets.h>
+#include <asm/suspend.h>
+#include <asm/romimage-macros.h>
+
+/* code to enter and leave self-refresh. must be self-contained.
+ * this code will be copied to on-chip memory and executed from there.
+ */
+ .balign 4
+ENTRY(ecovec24_sdram_enter_start)
+
+ /* DBSC: put memory in self-refresh mode */
+
+ ED 0xFD000010, 0x00000000 /* DBEN */
+ ED 0xFD000040, 0x00000000 /* DBRFPDN0 */
+ ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */
+ ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */
+ ED 0xFD000040, 0x00000001 /* DBRFPDN0 */
+
+ rts
+ nop
+
+ENTRY(ecovec24_sdram_enter_end)
+
+ .balign 4
+ENTRY(ecovec24_sdram_leave_start)
+
+ /* DBSC: put memory in auto-refresh mode */
+
+ ED 0xFD000040, 0x00000000 /* DBRFPDN0 */
+ WAIT 1
+ ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */
+ ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */
+ ED 0xFD000010, 0x00000001 /* DBEN */
+ ED 0xFD000040, 0x00010000 /* DBRFPDN0 */
+
+ rts
+ nop
+
+ENTRY(ecovec24_sdram_leave_end)
diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c
index 3b1ceb46fa54..826e62326d51 100644
--- a/arch/sh/boards/mach-ecovec24/setup.c
+++ b/arch/sh/boards/mach-ecovec24/setup.c
@@ -20,12 +20,14 @@
#include <linux/i2c.h>
#include <linux/i2c/tsc2007.h>
#include <linux/input.h>
+#include <linux/input/sh_keysc.h>
+#include <linux/mfd/sh_mobile_sdhi.h>
#include <video/sh_mobile_lcdc.h>
#include <media/sh_mobile_ceu.h>
#include <asm/heartbeat.h>
#include <asm/sh_eth.h>
-#include <asm/sh_keysc.h>
#include <asm/clock.h>
+#include <asm/suspend.h>
#include <cpu/sh7724.h>
/*
@@ -147,6 +149,9 @@ static struct platform_device sh_eth_device = {
},
.num_resources = ARRAY_SIZE(sh_eth_resources),
.resource = sh_eth_resources,
+ .archdata = {
+ .hwblk_id = HWBLK_ETHER,
+ },
};
/* USB0 host */
@@ -185,30 +190,18 @@ static struct platform_device usb0_host_device = {
.resource = usb0_host_resources,
};
-/*
- * USB1
- *
- * CN5 can use both host/function,
- * and we can determine it by checking PTB[3]
- *
- * This time only USB1 host is supported.
- */
+/* USB1 host/function */
void usb1_port_power(int port, int power)
{
- if (!gpio_get_value(GPIO_PTB3)) {
- printk(KERN_ERR "USB1 function is not supported\n");
- return;
- }
-
gpio_set_value(GPIO_PTB5, power);
}
-static struct r8a66597_platdata usb1_host_data = {
+static struct r8a66597_platdata usb1_common_data = {
.on_chip = 1,
.port_power = usb1_port_power,
};
-static struct resource usb1_host_resources[] = {
+static struct resource usb1_common_resources[] = {
[0] = {
.start = 0xa4d90000,
.end = 0xa4d90124 - 1,
@@ -221,16 +214,16 @@ static struct resource usb1_host_resources[] = {
},
};
-static struct platform_device usb1_host_device = {
- .name = "r8a66597_hcd",
+static struct platform_device usb1_common_device = {
+ /* .name will be added in arch_setup */
.id = 1,
.dev = {
.dma_mask = NULL, /* not use dma */
.coherent_dma_mask = 0xffffffff,
- .platform_data = &usb1_host_data,
+ .platform_data = &usb1_common_data,
},
- .num_resources = ARRAY_SIZE(usb1_host_resources),
- .resource = usb1_host_resources,
+ .num_resources = ARRAY_SIZE(usb1_common_resources),
+ .resource = usb1_common_resources,
};
/* LCDC */
@@ -428,16 +421,90 @@ static struct i2c_board_info ts_i2c_clients = {
.irq = IRQ0,
};
+/* SHDI0 */
+static void sdhi0_set_pwr(struct platform_device *pdev, int state)
+{
+ gpio_set_value(GPIO_PTB6, state);
+}
+
+static struct sh_mobile_sdhi_info sdhi0_info = {
+ .set_pwr = sdhi0_set_pwr,
+};
+
+static struct resource sdhi0_resources[] = {
+ [0] = {
+ .name = "SDHI0",
+ .start = 0x04ce0000,
+ .end = 0x04ce01ff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 101,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device sdhi0_device = {
+ .name = "sh_mobile_sdhi",
+ .num_resources = ARRAY_SIZE(sdhi0_resources),
+ .resource = sdhi0_resources,
+ .id = 0,
+ .dev = {
+ .platform_data = &sdhi0_info,
+ },
+ .archdata = {
+ .hwblk_id = HWBLK_SDHI0,
+ },
+};
+
+/* SHDI1 */
+static void sdhi1_set_pwr(struct platform_device *pdev, int state)
+{
+ gpio_set_value(GPIO_PTB7, state);
+}
+
+static struct sh_mobile_sdhi_info sdhi1_info = {
+ .set_pwr = sdhi1_set_pwr,
+};
+
+static struct resource sdhi1_resources[] = {
+ [0] = {
+ .name = "SDHI1",
+ .start = 0x04cf0000,
+ .end = 0x04cf01ff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 24,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device sdhi1_device = {
+ .name = "sh_mobile_sdhi",
+ .num_resources = ARRAY_SIZE(sdhi1_resources),
+ .resource = sdhi1_resources,
+ .id = 1,
+ .dev = {
+ .platform_data = &sdhi1_info,
+ },
+ .archdata = {
+ .hwblk_id = HWBLK_SDHI1,
+ },
+};
+
static struct platform_device *ecovec_devices[] __initdata = {
&heartbeat_device,
&nor_flash_device,
&sh_eth_device,
&usb0_host_device,
- &usb1_host_device, /* USB1 host support */
+ &usb1_common_device,
&lcdc_device,
&ceu0_device,
&ceu1_device,
&keysc_device,
+ &sdhi0_device,
+ &sdhi1_device,
};
#define EEPROM_ADDR 0x50
@@ -466,12 +533,9 @@ static u8 mac_read(struct i2c_adapter *a, u8 command)
return buf;
}
-#define MAC_LEN 6
-static void __init sh_eth_init(void)
+static void __init sh_eth_init(struct sh_eth_plat_data *pd)
{
struct i2c_adapter *a = i2c_get_adapter(1);
- struct clk *eth_clk;
- u8 mac[MAC_LEN];
int i;
if (!a) {
@@ -479,39 +543,30 @@ static void __init sh_eth_init(void)
return;
}
- eth_clk = clk_get(NULL, "eth0");
- if (!eth_clk) {
- pr_err("can not get eth0 clk\n");
- return;
- }
-
/* read MAC address frome EEPROM */
- for (i = 0; i < MAC_LEN; i++) {
- mac[i] = mac_read(a, 0x10 + i);
+ for (i = 0; i < sizeof(pd->mac_addr); i++) {
+ pd->mac_addr[i] = mac_read(a, 0x10 + i);
msleep(10);
}
-
- /* clock enable */
- clk_enable(eth_clk);
-
- /* reset sh-eth */
- ctrl_outl(0x1, SH_ETH_ADDR + 0x0);
-
- /* set MAC addr */
- ctrl_outl((mac[0] << 24) |
- (mac[1] << 16) |
- (mac[2] << 8) |
- (mac[3] << 0), SH_ETH_MAHR);
- ctrl_outl((mac[4] << 8) |
- (mac[5] << 0), SH_ETH_MALR);
-
- clk_put(eth_clk);
}
#define PORT_HIZA 0xA4050158
#define IODRIVEA 0xA405018A
+
+extern char ecovec24_sdram_enter_start;
+extern char ecovec24_sdram_enter_end;
+extern char ecovec24_sdram_leave_start;
+extern char ecovec24_sdram_leave_end;
+
static int __init arch_setup(void)
{
+ /* register board specific self-refresh code */
+ sh_mobile_register_self_refresh(SUSP_SH_STANDBY | SUSP_SH_SF,
+ &ecovec24_sdram_enter_start,
+ &ecovec24_sdram_enter_end,
+ &ecovec24_sdram_leave_start,
+ &ecovec24_sdram_leave_end);
+
/* enable STATUS0, STATUS2 and PDSTATUS */
gpio_request(GPIO_FN_STATUS0, NULL);
gpio_request(GPIO_FN_STATUS2, NULL);
@@ -561,6 +616,14 @@ static int __init arch_setup(void)
ctrl_outw(0x0600, 0xa40501d4);
ctrl_outw(0x0600, 0xa4050192);
+ if (gpio_get_value(GPIO_PTB3)) {
+ printk(KERN_INFO "USB1 function is selected\n");
+ usb1_common_device.name = "r8a66597_udc";
+ } else {
+ printk(KERN_INFO "USB1 host is selected\n");
+ usb1_common_device.name = "r8a66597_hcd";
+ }
+
/* enable LCDC */
gpio_request(GPIO_FN_LCDD23, NULL);
gpio_request(GPIO_FN_LCDD22, NULL);
@@ -603,8 +666,8 @@ static int __init arch_setup(void)
gpio_direction_output(GPIO_PTR1, 0);
gpio_direction_output(GPIO_PTA2, 0);
- /* I/O buffer drive ability is low */
- ctrl_outw((ctrl_inw(IODRIVEA) & ~0x00c0) | 0x0040 , IODRIVEA);
+ /* I/O buffer drive ability is high */
+ ctrl_outw((ctrl_inw(IODRIVEA) & ~0x00c0) | 0x0080 , IODRIVEA);
if (gpio_get_value(GPIO_PTE6)) {
/* DVI */
@@ -710,6 +773,33 @@ static int __init arch_setup(void)
gpio_direction_input(GPIO_PTR5);
gpio_direction_input(GPIO_PTR6);
+ /* enable SDHI0 (needs DS2.4 set to ON) */
+ gpio_request(GPIO_FN_SDHI0CD, NULL);
+ gpio_request(GPIO_FN_SDHI0WP, NULL);
+ gpio_request(GPIO_FN_SDHI0CMD, NULL);
+ gpio_request(GPIO_FN_SDHI0CLK, NULL);
+ gpio_request(GPIO_FN_SDHI0D3, NULL);
+ gpio_request(GPIO_FN_SDHI0D2, NULL);
+ gpio_request(GPIO_FN_SDHI0D1, NULL);
+ gpio_request(GPIO_FN_SDHI0D0, NULL);
+ gpio_request(GPIO_PTB6, NULL);
+ gpio_direction_output(GPIO_PTB6, 0);
+
+ /* enable SDHI1 (needs DS2.6,7 set to ON,OFF) */
+ gpio_request(GPIO_FN_SDHI1CD, NULL);
+ gpio_request(GPIO_FN_SDHI1WP, NULL);
+ gpio_request(GPIO_FN_SDHI1CMD, NULL);
+ gpio_request(GPIO_FN_SDHI1CLK, NULL);
+ gpio_request(GPIO_FN_SDHI1D3, NULL);
+ gpio_request(GPIO_FN_SDHI1D2, NULL);
+ gpio_request(GPIO_FN_SDHI1D1, NULL);
+ gpio_request(GPIO_FN_SDHI1D0, NULL);
+ gpio_request(GPIO_PTB7, NULL);
+ gpio_direction_output(GPIO_PTB7, 0);
+
+ /* I/O buffer drive ability is high for SDHI1 */
+ ctrl_outw((ctrl_inw(IODRIVEA) & ~0x3000) | 0x2000 , IODRIVEA);
+
/* enable I2C device */
i2c_register_board_info(1, i2c1_devices,
ARRAY_SIZE(i2c1_devices));
@@ -721,12 +811,11 @@ arch_initcall(arch_setup);
static int __init devices_setup(void)
{
- sh_eth_init();
+ sh_eth_init(&sh_eth_plat);
return 0;
}
device_initcall(devices_setup);
-
static struct sh_machine_vector mv_ecovec __initmv = {
.mv_name = "R0P7724 (EcoVec)",
};
diff --git a/arch/sh/boards/mach-highlander/setup.c b/arch/sh/boards/mach-highlander/setup.c
index 566e69d8d729..f663c14d8885 100644
--- a/arch/sh/boards/mach-highlander/setup.c
+++ b/arch/sh/boards/mach-highlander/setup.c
@@ -384,7 +384,7 @@ static unsigned char irl2irq[HL_NR_IRL];
static int highlander_irq_demux(int irq)
{
- if (irq >= HL_NR_IRL || !irl2irq[irq])
+ if (irq >= HL_NR_IRL || irq < 0 || !irl2irq[irq])
return irq;
return irl2irq[irq];
diff --git a/arch/sh/boards/mach-kfr2r09/Makefile b/arch/sh/boards/mach-kfr2r09/Makefile
index 5d5867826e3b..4e577a3bf658 100644
--- a/arch/sh/boards/mach-kfr2r09/Makefile
+++ b/arch/sh/boards/mach-kfr2r09/Makefile
@@ -1,2 +1,2 @@
-obj-y := setup.o
+obj-y := setup.o sdram.o
obj-$(CONFIG_FB_SH_MOBILE_LCDC) += lcd_wqvga.o
diff --git a/arch/sh/boards/mach-kfr2r09/sdram.S b/arch/sh/boards/mach-kfr2r09/sdram.S
new file mode 100644
index 000000000000..0c9f55bec2fe
--- /dev/null
+++ b/arch/sh/boards/mach-kfr2r09/sdram.S
@@ -0,0 +1,80 @@
+/*
+ * KFR2R09 sdram self/auto-refresh setup code
+ *
+ * Copyright (C) 2009 Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/sys.h>
+#include <linux/errno.h>
+#include <linux/linkage.h>
+#include <asm/asm-offsets.h>
+#include <asm/suspend.h>
+#include <asm/romimage-macros.h>
+
+/* code to enter and leave self-refresh. must be self-contained.
+ * this code will be copied to on-chip memory and executed from there.
+ */
+ .balign 4
+ENTRY(kfr2r09_sdram_enter_start)
+
+ /* DBSC: put memory in self-refresh mode */
+
+ ED 0xFD000010, 0x00000000 /* DBEN */
+ ED 0xFD000040, 0x00000000 /* DBRFPDN0 */
+ ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */
+ ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */
+ ED 0xFD000040, 0x00000001 /* DBRFPDN0 */
+
+ rts
+ nop
+
+ENTRY(kfr2r09_sdram_enter_end)
+
+ .balign 4
+ENTRY(kfr2r09_sdram_leave_start)
+
+ /* DBSC: put memory in auto-refresh mode */
+
+ mov.l @(SH_SLEEP_MODE, r5), r0
+ tst #SUSP_SH_RSTANDBY, r0
+ bf resume_rstandby
+
+ ED 0xFD000040, 0x00000000 /* DBRFPDN0 */
+ WAIT 1
+ ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */
+ ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */
+ ED 0xFD000010, 0x00000001 /* DBEN */
+ ED 0xFD000040, 0x00010000 /* DBRFPDN0 */
+
+ rts
+ nop
+
+resume_rstandby:
+
+ /* DBSC: re-initialize and put in auto-refresh */
+
+ ED 0xFD000108, 0x40000301 /* DBPDCNT0 */
+ ED 0xFD000020, 0x011B0002 /* DBCONF */
+ ED 0xFD000030, 0x03060E02 /* DBTR0 */
+ ED 0xFD000034, 0x01020102 /* DBTR1 */
+ ED 0xFD000038, 0x01090406 /* DBTR2 */
+ ED 0xFD000008, 0x00000004 /* DBKIND */
+ ED 0xFD000040, 0x00000001 /* DBRFPDN0 */
+ ED 0xFD000040, 0x00000000 /* DBRFPDN0 */
+ ED 0xFD000018, 0x00000001 /* DBCKECNT */
+ WAIT 1
+ ED 0xFD000010, 0x00000001 /* DBEN */
+ ED 0xFD000044, 0x000004AF /* DBRFPDN1 */
+ ED 0xFD000048, 0x20CF0037 /* DBRFPDN2 */
+ ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */
+ ED 0xFD000108, 0x40000300 /* DBPDCNT0 */
+ ED 0xFD000040, 0x00010000 /* DBRFPDN0 */
+
+ rts
+ nop
+
+ENTRY(kfr2r09_sdram_leave_end)
diff --git a/arch/sh/boards/mach-kfr2r09/setup.c b/arch/sh/boards/mach-kfr2r09/setup.c
index c08d33fe2104..87438d6603d6 100644
--- a/arch/sh/boards/mach-kfr2r09/setup.c
+++ b/arch/sh/boards/mach-kfr2r09/setup.c
@@ -16,13 +16,16 @@
#include <linux/clk.h>
#include <linux/gpio.h>
#include <linux/input.h>
+#include <linux/input/sh_keysc.h>
#include <linux/i2c.h>
#include <linux/usb/r8a66597.h>
+#include <media/soc_camera.h>
+#include <media/sh_mobile_ceu.h>
#include <video/sh_mobile_lcdc.h>
+#include <asm/suspend.h>
#include <asm/clock.h>
#include <asm/machvec.h>
#include <asm/io.h>
-#include <asm/sh_keysc.h>
#include <cpu/sh7724.h>
#include <mach/kfr2r09.h>
@@ -212,11 +215,154 @@ static struct platform_device kfr2r09_usb0_gadget_device = {
.resource = kfr2r09_usb0_gadget_resources,
};
+static struct sh_mobile_ceu_info sh_mobile_ceu_info = {
+ .flags = SH_CEU_FLAG_USE_8BIT_BUS,
+};
+
+static struct resource kfr2r09_ceu_resources[] = {
+ [0] = {
+ .name = "CEU",
+ .start = 0xfe910000,
+ .end = 0xfe91009f,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 52,
+ .end = 52,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ /* place holder for contiguous memory */
+ },
+};
+
+static struct platform_device kfr2r09_ceu_device = {
+ .name = "sh_mobile_ceu",
+ .id = 0, /* "ceu0" clock */
+ .num_resources = ARRAY_SIZE(kfr2r09_ceu_resources),
+ .resource = kfr2r09_ceu_resources,
+ .dev = {
+ .platform_data = &sh_mobile_ceu_info,
+ },
+ .archdata = {
+ .hwblk_id = HWBLK_CEU0,
+ },
+};
+
+static struct i2c_board_info kfr2r09_i2c_camera = {
+ I2C_BOARD_INFO("rj54n1cb0c", 0x50),
+};
+
+static struct clk *camera_clk;
+
+#define DRVCRB 0xA405018C
+static int camera_power(struct device *dev, int mode)
+{
+ int ret;
+
+ if (mode) {
+ long rate;
+
+ camera_clk = clk_get(NULL, "video_clk");
+ if (IS_ERR(camera_clk))
+ return PTR_ERR(camera_clk);
+
+ /* set VIO_CKO clock to 25MHz */
+ rate = clk_round_rate(camera_clk, 25000000);
+ ret = clk_set_rate(camera_clk, rate);
+ if (ret < 0)
+ goto eclkrate;
+
+ /* set DRVCRB
+ *
+ * use 1.8 V for VccQ_VIO
+ * use 2.85V for VccQ_SR
+ */
+ ctrl_outw((ctrl_inw(DRVCRB) & ~0x0003) | 0x0001, DRVCRB);
+
+ /* reset clear */
+ ret = gpio_request(GPIO_PTB4, NULL);
+ if (ret < 0)
+ goto eptb4;
+ ret = gpio_request(GPIO_PTB7, NULL);
+ if (ret < 0)
+ goto eptb7;
+
+ ret = gpio_direction_output(GPIO_PTB4, 1);
+ if (!ret)
+ ret = gpio_direction_output(GPIO_PTB7, 1);
+ if (ret < 0)
+ goto egpioout;
+ msleep(1);
+
+ ret = clk_enable(camera_clk); /* start VIO_CKO */
+ if (ret < 0)
+ goto eclkon;
+
+ return 0;
+ }
+
+ ret = 0;
+
+ clk_disable(camera_clk);
+eclkon:
+ gpio_set_value(GPIO_PTB7, 0);
+egpioout:
+ gpio_set_value(GPIO_PTB4, 0);
+ gpio_free(GPIO_PTB7);
+eptb7:
+ gpio_free(GPIO_PTB4);
+eptb4:
+eclkrate:
+ clk_put(camera_clk);
+ return ret;
+}
+
+static struct soc_camera_link rj54n1_link = {
+ .power = camera_power,
+ .board_info = &kfr2r09_i2c_camera,
+ .i2c_adapter_id = 1,
+ .module_name = "rj54n1cb0c",
+};
+
+static struct platform_device kfr2r09_camera = {
+ .name = "soc-camera-pdrv",
+ .id = 0,
+ .dev = {
+ .platform_data = &rj54n1_link,
+ },
+};
+
+static struct resource kfr2r09_sh_sdhi0_resources[] = {
+ [0] = {
+ .name = "SDHI0",
+ .start = 0x04ce0000,
+ .end = 0x04ce01ff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 101,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device kfr2r09_sh_sdhi0_device = {
+ .name = "sh_mobile_sdhi",
+ .num_resources = ARRAY_SIZE(kfr2r09_sh_sdhi0_resources),
+ .resource = kfr2r09_sh_sdhi0_resources,
+ .archdata = {
+ .hwblk_id = HWBLK_SDHI0,
+ },
+};
+
static struct platform_device *kfr2r09_devices[] __initdata = {
&kfr2r09_nor_flash_device,
&kfr2r09_nand_flash_device,
&kfr2r09_sh_keysc_device,
&kfr2r09_sh_lcdc_device,
+ &kfr2r09_ceu_device,
+ &kfr2r09_camera,
+ &kfr2r09_sh_sdhi0_device,
};
#define BSC_CS0BCR 0xfec10004
@@ -268,11 +414,59 @@ static int kfr2r09_usb0_gadget_i2c_setup(void)
return 0;
}
+
+static int kfr2r09_serial_i2c_setup(void)
+{
+ struct i2c_adapter *a;
+ struct i2c_msg msg;
+ unsigned char buf[2];
+ int ret;
+
+ a = i2c_get_adapter(0);
+ if (!a)
+ return -ENODEV;
+
+ /* set bit 6 (the 7th bit) of chip at 0x09, register 0x13 */
+ buf[0] = 0x13;
+ msg.addr = 0x09;
+ msg.buf = buf;
+ msg.len = 1;
+ msg.flags = 0;
+ ret = i2c_transfer(a, &msg, 1);
+ if (ret != 1)
+ return -ENODEV;
+
+ buf[0] = 0;
+ msg.addr = 0x09;
+ msg.buf = buf;
+ msg.len = 1;
+ msg.flags = I2C_M_RD;
+ ret = i2c_transfer(a, &msg, 1);
+ if (ret != 1)
+ return -ENODEV;
+
+ buf[1] = buf[0] | (1 << 6);
+ buf[0] = 0x13;
+ msg.addr = 0x09;
+ msg.buf = buf;
+ msg.len = 2;
+ msg.flags = 0;
+ ret = i2c_transfer(a, &msg, 1);
+ if (ret != 1)
+ return -ENODEV;
+
+ return 0;
+}
#else
static int kfr2r09_usb0_gadget_i2c_setup(void)
{
return -ENODEV;
}
+
+static int kfr2r09_serial_i2c_setup(void)
+{
+ return -ENODEV;
+}
#endif
static int kfr2r09_usb0_gadget_setup(void)
@@ -299,11 +493,27 @@ static int kfr2r09_usb0_gadget_setup(void)
return 0;
}
+extern char kfr2r09_sdram_enter_start;
+extern char kfr2r09_sdram_enter_end;
+extern char kfr2r09_sdram_leave_start;
+extern char kfr2r09_sdram_leave_end;
+
static int __init kfr2r09_devices_setup(void)
{
+ /* register board specific self-refresh code */
+ sh_mobile_register_self_refresh(SUSP_SH_STANDBY | SUSP_SH_SF |
+ SUSP_SH_RSTANDBY,
+ &kfr2r09_sdram_enter_start,
+ &kfr2r09_sdram_enter_end,
+ &kfr2r09_sdram_leave_start,
+ &kfr2r09_sdram_leave_end);
+
/* enable SCIF1 serial port for YC401 console support */
gpio_request(GPIO_FN_SCIF1_RXD, NULL);
gpio_request(GPIO_FN_SCIF1_TXD, NULL);
+ kfr2r09_serial_i2c_setup(); /* ECONTMSK(bit6=L10ONEN) set 1 */
+ gpio_request(GPIO_PTG3, NULL); /* HPON_ON */
+ gpio_direction_output(GPIO_PTG3, 1); /* HPON_ON = H */
/* setup NOR flash at CS0 */
ctrl_outl(0x36db0400, BSC_CS0BCR);
@@ -361,6 +571,32 @@ static int __init kfr2r09_devices_setup(void)
if (kfr2r09_usb0_gadget_setup() == 0)
platform_device_register(&kfr2r09_usb0_gadget_device);
+ /* CEU */
+ gpio_request(GPIO_FN_VIO_CKO, NULL);
+ gpio_request(GPIO_FN_VIO0_CLK, NULL);
+ gpio_request(GPIO_FN_VIO0_VD, NULL);
+ gpio_request(GPIO_FN_VIO0_HD, NULL);
+ gpio_request(GPIO_FN_VIO0_FLD, NULL);
+ gpio_request(GPIO_FN_VIO0_D7, NULL);
+ gpio_request(GPIO_FN_VIO0_D6, NULL);
+ gpio_request(GPIO_FN_VIO0_D5, NULL);
+ gpio_request(GPIO_FN_VIO0_D4, NULL);
+ gpio_request(GPIO_FN_VIO0_D3, NULL);
+ gpio_request(GPIO_FN_VIO0_D2, NULL);
+ gpio_request(GPIO_FN_VIO0_D1, NULL);
+ gpio_request(GPIO_FN_VIO0_D0, NULL);
+
+ platform_resource_setup_memory(&kfr2r09_ceu_device, "ceu", 4 << 20);
+
+ /* SDHI0 connected to yc304 */
+ gpio_request(GPIO_FN_SDHI0CD, NULL);
+ gpio_request(GPIO_FN_SDHI0D3, NULL);
+ gpio_request(GPIO_FN_SDHI0D2, NULL);
+ gpio_request(GPIO_FN_SDHI0D1, NULL);
+ gpio_request(GPIO_FN_SDHI0D0, NULL);
+ gpio_request(GPIO_FN_SDHI0CMD, NULL);
+ gpio_request(GPIO_FN_SDHI0CLK, NULL);
+
return platform_add_devices(kfr2r09_devices,
ARRAY_SIZE(kfr2r09_devices));
}
diff --git a/arch/sh/boards/mach-migor/Makefile b/arch/sh/boards/mach-migor/Makefile
index 5f231dd25c0e..4601a89e5ac7 100644
--- a/arch/sh/boards/mach-migor/Makefile
+++ b/arch/sh/boards/mach-migor/Makefile
@@ -1,2 +1,2 @@
-obj-y := setup.o
+obj-y := setup.o sdram.o
obj-$(CONFIG_SH_MIGOR_QVGA) += lcd_qvga.o
diff --git a/arch/sh/boards/mach-migor/sdram.S b/arch/sh/boards/mach-migor/sdram.S
new file mode 100644
index 000000000000..614aa3a1398c
--- /dev/null
+++ b/arch/sh/boards/mach-migor/sdram.S
@@ -0,0 +1,69 @@
+/*
+ * Migo-R sdram self/auto-refresh setup code
+ *
+ * Copyright (C) 2009 Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/sys.h>
+#include <linux/errno.h>
+#include <linux/linkage.h>
+#include <asm/asm-offsets.h>
+#include <asm/suspend.h>
+#include <asm/romimage-macros.h>
+
+/* code to enter and leave self-refresh. must be self-contained.
+ * this code will be copied to on-chip memory and executed from there.
+ */
+ .balign 4
+ENTRY(migor_sdram_enter_start)
+
+ /* SBSC: disable power down and put in self-refresh mode */
+ mov.l 1f, r4
+ mov.l 2f, r1
+ mov.l @r4, r2
+ or r1, r2
+ mov.l 3f, r3
+ and r3, r2
+ mov.l r2, @r4
+
+ rts
+ nop
+
+ .balign 4
+1: .long 0xfe400008 /* SDCR0 */
+2: .long 0x00000400
+3: .long 0xffff7fff
+ENTRY(migor_sdram_enter_end)
+
+ .balign 4
+ENTRY(migor_sdram_leave_start)
+
+ /* SBSC: set auto-refresh mode */
+ mov.l 1f, r4
+ mov.l @r4, r0
+ mov.l 4f, r1
+ and r1, r0
+ mov.l r0, @r4
+ mov.l 6f, r4
+ mov.l 8f, r0
+ mov.l @r4, r1
+ mov #-1, r4
+ add r4, r1
+ or r1, r0
+ mov.l 7f, r1
+ mov.l r0, @r1
+
+ rts
+ nop
+
+ .balign 4
+1: .long 0xfe400008 /* SDCR0 */
+4: .long 0xfffffbff
+6: .long 0xfe40001c /* RTCOR */
+7: .long 0xfe400018 /* RTCNT */
+8: .long 0xa55a0000
+ENTRY(migor_sdram_leave_end)
diff --git a/arch/sh/boards/mach-migor/setup.c b/arch/sh/boards/mach-migor/setup.c
index 6ed1fd32369e..9099b6da9957 100644
--- a/arch/sh/boards/mach-migor/setup.c
+++ b/arch/sh/boards/mach-migor/setup.c
@@ -11,6 +11,7 @@
#include <linux/platform_device.h>
#include <linux/interrupt.h>
#include <linux/input.h>
+#include <linux/input/sh_keysc.h>
#include <linux/mtd/physmap.h>
#include <linux/mtd/nand.h>
#include <linux/i2c.h>
@@ -18,8 +19,6 @@
#include <linux/delay.h>
#include <linux/clk.h>
#include <linux/gpio.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/spi_gpio.h>
#include <video/sh_mobile_lcdc.h>
#include <media/sh_mobile_ceu.h>
#include <media/ov772x.h>
@@ -27,7 +26,7 @@
#include <asm/clock.h>
#include <asm/machvec.h>
#include <asm/io.h>
-#include <asm/sh_keysc.h>
+#include <asm/suspend.h>
#include <mach/migor.h>
#include <cpu/sh7722.h>
@@ -390,17 +389,25 @@ static struct platform_device migor_ceu_device = {
},
};
-struct spi_gpio_platform_data sdcard_cn9_platform_data = {
- .sck = GPIO_PTD0,
- .mosi = GPIO_PTD1,
- .miso = GPIO_PTD2,
- .num_chipselect = 1,
+static struct resource sdhi_cn9_resources[] = {
+ [0] = {
+ .name = "SDHI",
+ .start = 0x04ce0000,
+ .end = 0x04ce01ff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 101,
+ .flags = IORESOURCE_IRQ,
+ },
};
-static struct platform_device sdcard_cn9_device = {
- .name = "spi_gpio",
- .dev = {
- .platform_data = &sdcard_cn9_platform_data,
+static struct platform_device sdhi_cn9_device = {
+ .name = "sh_mobile_sdhi",
+ .num_resources = ARRAY_SIZE(sdhi_cn9_resources),
+ .resource = sdhi_cn9_resources,
+ .archdata = {
+ .hwblk_id = HWBLK_SDHI,
},
};
@@ -467,23 +474,24 @@ static struct platform_device *migor_devices[] __initdata = {
&migor_ceu_device,
&migor_nor_flash_device,
&migor_nand_flash_device,
- &sdcard_cn9_device,
+ &sdhi_cn9_device,
&migor_camera[0],
&migor_camera[1],
};
-static struct spi_board_info migor_spi_devices[] = {
- {
- .modalias = "mmc_spi",
- .max_speed_hz = 5000000,
- .chip_select = 0,
- .controller_data = (void *) GPIO_PTD5,
- },
-};
+extern char migor_sdram_enter_start;
+extern char migor_sdram_enter_end;
+extern char migor_sdram_leave_start;
+extern char migor_sdram_leave_end;
static int __init migor_devices_setup(void)
{
-
+ /* register board specific self-refresh code */
+ sh_mobile_register_self_refresh(SUSP_SH_STANDBY | SUSP_SH_SF,
+ &migor_sdram_enter_start,
+ &migor_sdram_enter_end,
+ &migor_sdram_leave_start,
+ &migor_sdram_leave_end);
#ifdef CONFIG_PM
/* Let D11 LED show STATUS0 */
gpio_request(GPIO_FN_STATUS0, NULL);
@@ -525,6 +533,16 @@ static int __init migor_devices_setup(void)
gpio_request(GPIO_PTA1, NULL);
gpio_direction_input(GPIO_PTA1);
+ /* SDHI */
+ gpio_request(GPIO_FN_SDHICD, NULL);
+ gpio_request(GPIO_FN_SDHIWP, NULL);
+ gpio_request(GPIO_FN_SDHID3, NULL);
+ gpio_request(GPIO_FN_SDHID2, NULL);
+ gpio_request(GPIO_FN_SDHID1, NULL);
+ gpio_request(GPIO_FN_SDHID0, NULL);
+ gpio_request(GPIO_FN_SDHICMD, NULL);
+ gpio_request(GPIO_FN_SDHICLK, NULL);
+
/* Touch Panel */
gpio_request(GPIO_FN_IRQ6, NULL);
@@ -612,9 +630,6 @@ static int __init migor_devices_setup(void)
i2c_register_board_info(0, migor_i2c_devices,
ARRAY_SIZE(migor_i2c_devices));
- spi_register_board_info(migor_spi_devices,
- ARRAY_SIZE(migor_spi_devices));
-
return platform_add_devices(migor_devices, ARRAY_SIZE(migor_devices));
}
arch_initcall(migor_devices_setup);
diff --git a/arch/sh/boards/mach-r2d/irq.c b/arch/sh/boards/mach-r2d/irq.c
index c70fecedcac4..78d7b27c80da 100644
--- a/arch/sh/boards/mach-r2d/irq.c
+++ b/arch/sh/boards/mach-r2d/irq.c
@@ -116,7 +116,7 @@ static unsigned char irl2irq[R2D_NR_IRL];
int rts7751r2d_irq_demux(int irq)
{
- if (irq >= R2D_NR_IRL || !irl2irq[irq])
+ if (irq >= R2D_NR_IRL || irq < 0 || !irl2irq[irq])
return irq;
return irl2irq[irq];
diff --git a/arch/sh/boards/mach-se/7722/irq.c b/arch/sh/boards/mach-se/7722/irq.c
index 02d21a3e2a8f..4eb31acfafef 100644
--- a/arch/sh/boards/mach-se/7722/irq.c
+++ b/arch/sh/boards/mach-se/7722/irq.c
@@ -16,15 +16,17 @@
#include <asm/io.h>
#include <mach-se/mach/se7722.h>
+unsigned int se7722_fpga_irq[SE7722_FPGA_IRQ_NR] = { 0, };
+
static void disable_se7722_irq(unsigned int irq)
{
- unsigned int bit = irq - SE7722_FPGA_IRQ_BASE;
+ unsigned int bit = (unsigned int)get_irq_chip_data(irq);
ctrl_outw(ctrl_inw(IRQ01_MASK) | 1 << bit, IRQ01_MASK);
}
static void enable_se7722_irq(unsigned int irq)
{
- unsigned int bit = irq - SE7722_FPGA_IRQ_BASE;
+ unsigned int bit = (unsigned int)get_irq_chip_data(irq);
ctrl_outw(ctrl_inw(IRQ01_MASK) & ~(1 << bit), IRQ01_MASK);
}
@@ -38,18 +40,15 @@ static struct irq_chip se7722_irq_chip __read_mostly = {
static void se7722_irq_demux(unsigned int irq, struct irq_desc *desc)
{
unsigned short intv = ctrl_inw(IRQ01_STS);
- struct irq_desc *ext_desc;
- unsigned int ext_irq = SE7722_FPGA_IRQ_BASE;
+ unsigned int ext_irq = 0;
intv &= (1 << SE7722_FPGA_IRQ_NR) - 1;
- while (intv) {
- if (intv & 1) {
- ext_desc = irq_desc + ext_irq;
- handle_level_irq(ext_irq, ext_desc);
- }
- intv >>= 1;
- ext_irq++;
+ for (; intv; intv >>= 1, ext_irq++) {
+ if (!(intv & 1))
+ continue;
+
+ generic_handle_irq(se7722_fpga_irq[ext_irq]);
}
}
@@ -63,11 +62,18 @@ void __init init_se7722_IRQ(void)
ctrl_outw(0, IRQ01_MASK); /* disable all irqs */
ctrl_outw(0x2000, 0xb03fffec); /* mrshpc irq enable */
- for (i = 0; i < SE7722_FPGA_IRQ_NR; i++)
- set_irq_chip_and_handler_name(SE7722_FPGA_IRQ_BASE + i,
+ for (i = 0; i < SE7722_FPGA_IRQ_NR; i++) {
+ se7722_fpga_irq[i] = create_irq();
+ if (se7722_fpga_irq[i] < 0)
+ return;
+
+ set_irq_chip_and_handler_name(se7722_fpga_irq[i],
&se7722_irq_chip,
handle_level_irq, "level");
+ set_irq_chip_data(se7722_fpga_irq[i], (void *)i);
+ }
+
set_irq_chained_handler(IRQ0_IRQ, se7722_irq_demux);
set_irq_type(IRQ0_IRQ, IRQ_TYPE_LEVEL_LOW);
diff --git a/arch/sh/boards/mach-se/7722/setup.c b/arch/sh/boards/mach-se/7722/setup.c
index 36374078e521..b1cb9425b600 100644
--- a/arch/sh/boards/mach-se/7722/setup.c
+++ b/arch/sh/boards/mach-se/7722/setup.c
@@ -14,6 +14,7 @@
#include <linux/platform_device.h>
#include <linux/ata_platform.h>
#include <linux/input.h>
+#include <linux/input/sh_keysc.h>
#include <linux/smc91x.h>
#include <mach-se/mach/se7722.h>
#include <mach-se/mach/mrshpc.h>
@@ -21,7 +22,6 @@
#include <asm/clock.h>
#include <asm/io.h>
#include <asm/heartbeat.h>
-#include <asm/sh_keysc.h>
#include <cpu/sh7722.h>
/* Heartbeat */
@@ -60,8 +60,7 @@ static struct resource smc91x_eth_resources[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = SMC_IRQ,
- .end = SMC_IRQ,
+ /* Filled in later */
.flags = IORESOURCE_IRQ,
},
};
@@ -90,8 +89,7 @@ static struct resource cf_ide_resources[] = {
.flags = IORESOURCE_IO,
},
[2] = {
- .start = MRSHPC_IRQ0,
- .end = MRSHPC_IRQ0,
+ /* Filled in later */
.flags = IORESOURCE_IRQ,
},
};
@@ -153,6 +151,14 @@ static struct platform_device *se7722_devices[] __initdata = {
static int __init se7722_devices_setup(void)
{
mrshpc_setup_windows();
+
+ /* Wire-up dynamic vectors */
+ cf_ide_resources[2].start = cf_ide_resources[2].end =
+ se7722_fpga_irq[SE7722_FPGA_IRQ_MRSHPC0];
+
+ smc91x_eth_resources[1].start = smc91x_eth_resources[1].end =
+ se7722_fpga_irq[SE7722_FPGA_IRQ_SMC];
+
return platform_add_devices(se7722_devices, ARRAY_SIZE(se7722_devices));
}
device_initcall(se7722_devices_setup);
@@ -193,6 +199,5 @@ static void __init se7722_setup(char **cmdline_p)
static struct sh_machine_vector mv_se7722 __initmv = {
.mv_name = "Solution Engine 7722" ,
.mv_setup = se7722_setup ,
- .mv_nr_irqs = SE7722_FPGA_IRQ_BASE + SE7722_FPGA_IRQ_NR,
.mv_init_irq = init_se7722_IRQ,
};
diff --git a/arch/sh/boards/mach-se/7724/Makefile b/arch/sh/boards/mach-se/7724/Makefile
index 349cbd6ce82d..a08b36830f0e 100644
--- a/arch/sh/boards/mach-se/7724/Makefile
+++ b/arch/sh/boards/mach-se/7724/Makefile
@@ -7,4 +7,4 @@
#
#
-obj-y := setup.o irq.o \ No newline at end of file
+obj-y := setup.o irq.o sdram.o
diff --git a/arch/sh/boards/mach-se/7724/sdram.S b/arch/sh/boards/mach-se/7724/sdram.S
new file mode 100644
index 000000000000..9040167d5022
--- /dev/null
+++ b/arch/sh/boards/mach-se/7724/sdram.S
@@ -0,0 +1,52 @@
+/*
+ * MS7724SE sdram self/auto-refresh setup code
+ *
+ * Copyright (C) 2009 Magnus Damm
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/sys.h>
+#include <linux/errno.h>
+#include <linux/linkage.h>
+#include <asm/asm-offsets.h>
+#include <asm/suspend.h>
+#include <asm/romimage-macros.h>
+
+/* code to enter and leave self-refresh. must be self-contained.
+ * this code will be copied to on-chip memory and executed from there.
+ */
+ .balign 4
+ENTRY(ms7724se_sdram_enter_start)
+
+ /* DBSC: put memory in self-refresh mode */
+
+ ED 0xFD000010, 0x00000000 /* DBEN */
+ ED 0xFD000040, 0x00000000 /* DBRFPDN0 */
+ ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */
+ ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */
+ ED 0xFD000040, 0x00000001 /* DBRFPDN0 */
+
+ rts
+ nop
+
+ENTRY(ms7724se_sdram_enter_end)
+
+ .balign 4
+ENTRY(ms7724se_sdram_leave_start)
+
+ /* DBSC: put memory in auto-refresh mode */
+
+ ED 0xFD000040, 0x00000000 /* DBRFPDN0 */
+ WAIT 1
+ ED 0xFD000014, 0x00000002 /* DBCMDCNT (PALL) */
+ ED 0xFD000014, 0x00000004 /* DBCMDCNT (REF) */
+ ED 0xFD000010, 0x00000001 /* DBEN */
+ ED 0xFD000040, 0x00010000 /* DBRFPDN0 */
+
+ rts
+ nop
+
+ENTRY(ms7724se_sdram_leave_end)
diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c
index e78c3be8ad2f..da01fc0dc881 100644
--- a/arch/sh/boards/mach-se/7724/setup.c
+++ b/arch/sh/boards/mach-se/7724/setup.c
@@ -19,6 +19,7 @@
#include <linux/smc91x.h>
#include <linux/gpio.h>
#include <linux/input.h>
+#include <linux/input/sh_keysc.h>
#include <linux/usb/r8a66597.h>
#include <video/sh_mobile_lcdc.h>
#include <media/sh_mobile_ceu.h>
@@ -27,7 +28,7 @@
#include <asm/heartbeat.h>
#include <asm/sh_eth.h>
#include <asm/clock.h>
-#include <asm/sh_keysc.h>
+#include <asm/suspend.h>
#include <cpu/sh7724.h>
#include <mach-se/mach/se7724.h>
@@ -448,6 +449,52 @@ static struct platform_device sh7724_usb1_gadget_device = {
.resource = sh7724_usb1_gadget_resources,
};
+static struct resource sdhi0_cn7_resources[] = {
+ [0] = {
+ .name = "SDHI0",
+ .start = 0x04ce0000,
+ .end = 0x04ce01ff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 101,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device sdhi0_cn7_device = {
+ .name = "sh_mobile_sdhi",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(sdhi0_cn7_resources),
+ .resource = sdhi0_cn7_resources,
+ .archdata = {
+ .hwblk_id = HWBLK_SDHI0,
+ },
+};
+
+static struct resource sdhi1_cn8_resources[] = {
+ [0] = {
+ .name = "SDHI1",
+ .start = 0x04cf0000,
+ .end = 0x04cf01ff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 24,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device sdhi1_cn8_device = {
+ .name = "sh_mobile_sdhi",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(sdhi1_cn8_resources),
+ .resource = sdhi1_cn8_resources,
+ .archdata = {
+ .hwblk_id = HWBLK_SDHI1,
+ },
+};
+
static struct platform_device *ms7724se_devices[] __initdata = {
&heartbeat_device,
&smc91x_eth_device,
@@ -460,6 +507,8 @@ static struct platform_device *ms7724se_devices[] __initdata = {
&sh7724_usb0_host_device,
&sh7724_usb1_gadget_device,
&fsi_device,
+ &sdhi0_cn7_device,
+ &sdhi1_cn8_device,
};
#define EEPROM_OP 0xBA206000
@@ -484,7 +533,7 @@ static int __init sh_eth_is_eeprom_ready(void)
static void __init sh_eth_init(void)
{
int i;
- u16 mac[3];
+ u16 mac;
/* check EEPROM status */
if (!sh_eth_is_eeprom_ready())
@@ -498,16 +547,10 @@ static void __init sh_eth_init(void)
if (!sh_eth_is_eeprom_ready())
return;
- mac[i] = ctrl_inw(EEPROM_DATA);
- mac[i] = ((mac[i] & 0xFF) << 8) | (mac[i] >> 8); /* swap */
+ mac = ctrl_inw(EEPROM_DATA);
+ sh_eth_plat.mac_addr[i << 1] = mac & 0xff;
+ sh_eth_plat.mac_addr[(i << 1) + 1] = mac >> 8;
}
-
- /* reset sh-eth */
- ctrl_outl(0x1, SH_ETH_ADDR + 0x0);
-
- /* set MAC addr */
- ctrl_outl(((mac[0] << 16) | (mac[1])), SH_ETH_MAHR);
- ctrl_outl((mac[2]), SH_ETH_MALR);
}
#define SW4140 0xBA201000
@@ -524,11 +567,22 @@ static void __init sh_eth_init(void)
#define SW41_G 0x4000
#define SW41_H 0x8000
+extern char ms7724se_sdram_enter_start;
+extern char ms7724se_sdram_enter_end;
+extern char ms7724se_sdram_leave_start;
+extern char ms7724se_sdram_leave_end;
+
static int __init devices_setup(void)
{
u16 sw = ctrl_inw(SW4140); /* select camera, monitor */
struct clk *fsia_clk;
+ /* register board specific self-refresh code */
+ sh_mobile_register_self_refresh(SUSP_SH_STANDBY | SUSP_SH_SF,
+ &ms7724se_sdram_enter_start,
+ &ms7724se_sdram_enter_end,
+ &ms7724se_sdram_leave_start,
+ &ms7724se_sdram_leave_end);
/* Reset Release */
ctrl_outw(ctrl_inw(FPGA_OUT) &
~((1 << 1) | /* LAN */
@@ -698,6 +752,26 @@ static int __init devices_setup(void)
clk_set_rate(&fsimcka_clk, 11000);
clk_put(fsia_clk);
+ /* SDHI0 connected to cn7 */
+ gpio_request(GPIO_FN_SDHI0CD, NULL);
+ gpio_request(GPIO_FN_SDHI0WP, NULL);
+ gpio_request(GPIO_FN_SDHI0D3, NULL);
+ gpio_request(GPIO_FN_SDHI0D2, NULL);
+ gpio_request(GPIO_FN_SDHI0D1, NULL);
+ gpio_request(GPIO_FN_SDHI0D0, NULL);
+ gpio_request(GPIO_FN_SDHI0CMD, NULL);
+ gpio_request(GPIO_FN_SDHI0CLK, NULL);
+
+ /* SDHI1 connected to cn8 */
+ gpio_request(GPIO_FN_SDHI1CD, NULL);
+ gpio_request(GPIO_FN_SDHI1WP, NULL);
+ gpio_request(GPIO_FN_SDHI1D3, NULL);
+ gpio_request(GPIO_FN_SDHI1D2, NULL);
+ gpio_request(GPIO_FN_SDHI1D1, NULL);
+ gpio_request(GPIO_FN_SDHI1D0, NULL);
+ gpio_request(GPIO_FN_SDHI1CMD, NULL);
+ gpio_request(GPIO_FN_SDHI1CLK, NULL);
+
/*
* enable SH-Eth
*
OpenPOWER on IntegriCloud