1 files changed, 0 insertions, 133 deletions
diff --git a/arch/sh/boards/overdrive/fpga.c b/arch/sh/boards/overdrive/fpga.c
deleted file mode 100644
index 956c23901228..000000000000
--- a/arch/sh/boards/overdrive/fpga.c
+++ /dev/null
@@ -1,133 +0,0 @@
-/* 
- * Copyright (C) 2000 David J. Mckay (david.mckay@st.com)
- *
- * May be copied or modified under the terms of the GNU General Public
- * License.  See linux/COPYING for more information.                            
- *
- * This file handles programming up the Altera Flex10K that interfaces to
- * the Galileo, and does the PS/2 keyboard and mouse
- *
- */
-
-
-#include <linux/kernel.h>
-#include <linux/smp.h>
-#include <linux/smp_lock.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/pci.h>
-#include <linux/delay.h>
-
-
-#include <asm/overdriver/gt64111.h>
-#include <asm/overdrive/overdrive.h>
-#include <asm/overdrive/fpga.h>
-
-#define FPGA_NotConfigHigh()  (*FPGA_ControlReg) = (*FPGA_ControlReg) | ENABLE_FPGA_BIT
-#define FPGA_NotConfigLow()   (*FPGA_ControlReg) = (*FPGA_ControlReg) & RESET_FPGA_MASK
-
-/* I need to find out what (if any) the real delay factor here is */
-/* The delay is definately not critical */
-#define long_delay() {int i;for(i=0;i<10000;i++);}
-#define short_delay() {int i;for(i=0;i<100;i++);}
-
-static void __init program_overdrive_fpga(const unsigned char *fpgacode,
-					  int size)
-{
-	int timeout = 0;
-	int i, j;
-	unsigned char b;
-	static volatile unsigned char *FPGA_ControlReg =
-	    (volatile unsigned char *) (OVERDRIVE_CTRL);
-	static volatile unsigned char *FPGA_ProgramReg =
-	    (volatile unsigned char *) (FPGA_DCLK_ADDRESS);
-
-	printk("FPGA:  Commencing FPGA Programming\n");
-
-	/* The PCI reset but MUST be low when programming the FPGA !!! */
-	b = (*FPGA_ControlReg) & RESET_PCI_MASK;
-
-	(*FPGA_ControlReg) = b;
-
-	/* Prepare FPGA to program */
-
-	FPGA_NotConfigHigh();
-	long_delay();
-
-	FPGA_NotConfigLow();
-	short_delay();
-
-	while ((*FPGA_ProgramReg & FPGA_NOT_STATUS) != 0) {
-		printk("FPGA:  Waiting for NotStatus to go Low ... \n");
-	}
-
-	FPGA_NotConfigHigh();
-
-	/* Wait for FPGA "ready to be programmed" signal */
-	printk("FPGA:  Waiting for NotStatus to go high (FPGA ready)... \n");
-
-	for (timeout = 0;
-	     (((*FPGA_ProgramReg & FPGA_NOT_STATUS) == 0)
-	      && (timeout < FPGA_TIMEOUT)); timeout++);
-
-	/* Check if timeout condition occured - i.e. an error */
-
-	if (timeout == FPGA_TIMEOUT) {
-		printk
-		    ("FPGA:  Failed to program - Timeout waiting for notSTATUS to go high\n");
-		return;
-	}
-
-	printk("FPGA:  Copying data to FPGA ... %d bytes\n", size);
-
-	/* Copy array to FPGA - bit at a time */
-
-	for (i = 0; i < size; i++) {
-		volatile unsigned w = 0;
-
-		for (j = 0; j < 8; j++) {
-			*FPGA_ProgramReg = (fpgacode[i] >> j) & 0x01;
-			short_delay();
-		}
-		if ((i & 0x3ff) == 0) {
-			printk(".");
-		}
-	}
-
-	/* Waiting for CONFDONE to go high - means the program is complete  */
-
-	for (timeout = 0;
-	     (((*FPGA_ProgramReg & FPGA_CONFDONE) == 0)
-	      && (timeout < FPGA_TIMEOUT)); timeout++) {
-
-		*FPGA_ProgramReg = 0x0;
-		long_delay();
-	}
-
-	if (timeout == FPGA_TIMEOUT) {
-		printk
-		    ("FPGA:  Failed to program - Timeout waiting for CONFDONE to go high\n");
-		return;
-	} else {		/* Clock another 10 times - gets the device into a working state      */
-		for (i = 0; i < 10; i++) {
-			*FPGA_ProgramReg = 0x0;
-			short_delay();
-		}
-	}
-
-	printk("FPGA:  Programming complete\n");
-}
-
-
-static const unsigned char __init fpgacode[] = {
-#include "./overdrive.ttf"	/* Code from maxplus2 compiler */
-	, 0, 0
-};
-
-
-int __init init_overdrive_fpga(void)
-{
-	program_overdrive_fpga(fpgacode, sizeof(fpgacode));
-
-	return 0;
-}