13 files changed, 19 insertions, 19 deletions
diff --git a/arch/s390/include/asm/atomic.h b/arch/s390/include/asm/atomic.h
index 5c5ba10384c2..d9db13810d15 100644
--- a/arch/s390/include/asm/atomic.h
+++ b/arch/s390/include/asm/atomic.h
@@ -9,7 +9,7 @@
  *
  * Atomic operations that C can't guarantee us.
  * Useful for resource counting etc.
- * s390 uses 'Compare And Swap' for atomicity in SMP enviroment.
+ * s390 uses 'Compare And Swap' for atomicity in SMP environment.
  *
  */
 
diff --git a/arch/s390/include/asm/cio.h b/arch/s390/include/asm/cio.h
index e34347d567a6..fc50a3342da3 100644
--- a/arch/s390/include/asm/cio.h
+++ b/arch/s390/include/asm/cio.h
@@ -183,7 +183,7 @@ struct esw3 {
  * The irb that is handed to the device driver when an interrupt occurs. For
  * solicited interrupts, the common I/O layer already performs checks whether
  * a field is valid; a field not being valid is always passed as %0.
- * If a unit check occured, @ecw may contain sense data; this is retrieved
+ * If a unit check occurred, @ecw may contain sense data; this is retrieved
  * by the common I/O layer itself if the device doesn't support concurrent
  * sense (so that the device driver never needs to perform basic sene itself).
  * For unsolicited interrupts, the irb is passed as-is (expect for sense data,
diff --git a/arch/s390/kernel/head.S b/arch/s390/kernel/head.S
index 7061398341d5..fb317bf2c378 100644
--- a/arch/s390/kernel/head.S
+++ b/arch/s390/kernel/head.S
@@ -460,7 +460,7 @@ startup:
 #ifndef CONFIG_MARCH_G5
 	# check capabilities against MARCH_{G5,Z900,Z990,Z9_109,Z10}
 	xc	__LC_STFL_FAC_LIST(8),__LC_STFL_FAC_LIST
-	stfl	__LC_STFL_FAC_LIST	# store facility list
+	.insn	s,0xb2b10000,__LC_STFL_FAC_LIST	# store facility list
 	tm	__LC_STFL_FAC_LIST,0x01	# stfle available ?
 	jz	0f
 	la	%r0,0
diff --git a/arch/s390/kernel/reipl64.S b/arch/s390/kernel/reipl64.S
index 5e73dee63baa..9eabbc90795d 100644
--- a/arch/s390/kernel/reipl64.S
+++ b/arch/s390/kernel/reipl64.S
@@ -78,7 +78,7 @@ do_reipl_asm:	basr	%r13,0
  * in the ESA psw.
  * Bit 31 of the addresses has to be 0 for the
  * 31bit lpswe instruction a fact they appear to have
- * ommited from the pop.
+ * omitted from the pop.
  */
 .Lnewpsw:	.quad	0x0000000080000000
 		.quad	.Lpg1
diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c
index ed183c2c6168..f5434d1ecb31 100644
--- a/arch/s390/kernel/setup.c
+++ b/arch/s390/kernel/setup.c
@@ -708,7 +708,7 @@ static void __init setup_hwcaps(void)
 	 * and 1ULL<<0 as bit 63. Bits 0-31 contain the same information
 	 * as stored by stfl, bits 32-xxx contain additional facilities.
 	 * How many facility words are stored depends on the number of
-	 * doublewords passed to the instruction. The additional facilites
+	 * doublewords passed to the instruction. The additional facilities
 	 * are:
 	 *   Bit 42: decimal floating point facility is installed
 	 *   Bit 44: perform floating point operation facility is installed
diff --git a/arch/s390/kernel/switch_cpu.S b/arch/s390/kernel/switch_cpu.S
index 469f11b574fa..20530dd2eab1 100644
--- a/arch/s390/kernel/switch_cpu.S
+++ b/arch/s390/kernel/switch_cpu.S
@@ -46,7 +46,9 @@ smp_restart_cpu:
 	ltr	%r4,%r4			/* New stack ? */
 	jz	1f
 	lr	%r15,%r4
-1:	basr	%r14,%r2
+1:	lr	%r14,%r2		/* r14: Function to call */
+	lr	%r2,%r3			/* r2 : Parameter for function*/
+	basr	%r14,%r14		/* Call function */
 
 .gprregs_addr:
 	.long	.gprregs
diff --git a/arch/s390/kernel/switch_cpu64.S b/arch/s390/kernel/switch_cpu64.S
index d94aacc898cb..5be3f43898f9 100644
--- a/arch/s390/kernel/switch_cpu64.S
+++ b/arch/s390/kernel/switch_cpu64.S
@@ -42,7 +42,9 @@ smp_restart_cpu:
 	ltgr	%r4,%r4			/* New stack ? */
 	jz	1f
 	lgr	%r15,%r4
-1:	basr	%r14,%r2
+1:	lgr	%r14,%r2		/* r14: Function to call */
+	lgr	%r2,%r3			/* r2 : Parameter for function*/
+	basr	%r14,%r14		/* Call function */
 
 	.section .data,"aw",@progbits
 .gprregs:
diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c
index 9e7b039458da..87be655557aa 100644
--- a/arch/s390/kernel/time.c
+++ b/arch/s390/kernel/time.c
@@ -724,7 +724,7 @@ static void clock_sync_cpu(struct clock_sync_data *sync)
 }
 
 /*
- * Sync the TOD clock using the port refered to by aibp. This port
+ * Sync the TOD clock using the port referred to by aibp. This port
  * has to be enabled and the other port has to be disabled. The
  * last eacr update has to be more than 1.6 seconds in the past.
  */
@@ -1012,7 +1012,7 @@ static void etr_work_fn(struct work_struct *work)
 		eacr = etr_handle_update(&aib, eacr);
 
 	/*
-	 * Select ports to enable. The prefered synchronization mode is PPS.
+	 * Select ports to enable. The preferred synchronization mode is PPS.
 	 * If a port can be enabled depends on a number of things:
 	 * 1) The port needs to be online and uptodate. A port is not
 	 *    disabled just because it is not uptodate, but it is only
@@ -1091,7 +1091,7 @@ static void etr_work_fn(struct work_struct *work)
 	/*
 	 * Update eacr and try to synchronize the clock. If the update
 	 * of eacr caused a stepping port switch (or if we have to
-	 * assume that a stepping port switch has occured) or the
+	 * assume that a stepping port switch has occurred) or the
 	 * clock syncing failed, reset the sync check control bit
 	 * and set up a timer to try again after 0.5 seconds
 	 */
diff --git a/arch/s390/kernel/vtime.c b/arch/s390/kernel/vtime.c
index 1ccdf4d8aa85..5e8ead4b4aba 100644
--- a/arch/s390/kernel/vtime.c
+++ b/arch/s390/kernel/vtime.c
@@ -44,7 +44,7 @@ static inline void set_vtimer(__u64 expires)
 	__u64 timer;
 
 	asm volatile ("  STPT %0\n"  /* Store current cpu timer value */
-		      "  SPT %1"     /* Set new value immediatly afterwards */
+		      "  SPT %1"     /* Set new value immediately afterwards */
 		      : "=m" (timer) : "m" (expires) );
 	S390_lowcore.system_timer += S390_lowcore.last_update_timer - timer;
 	S390_lowcore.last_update_timer = expires;
diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c
index bade533ba288..30ca85cce314 100644
--- a/arch/s390/kvm/kvm-s390.c
+++ b/arch/s390/kvm/kvm-s390.c
@@ -721,7 +721,7 @@ static int __init kvm_s390_init(void)
 
 	/*
 	 * guests can ask for up to 255+1 double words, we need a full page
-	 * to hold the maximum amount of facilites. On the other hand, we
+	 * to hold the maximum amount of facilities. On the other hand, we
 	 * only set facilities that are known to work in KVM.
 	 */
 	facilities = (unsigned long long *) get_zeroed_page(GFP_KERNEL|GFP_DMA);
diff --git a/arch/s390/kvm/priv.c b/arch/s390/kvm/priv.c
index 9194a4b52b22..73c47bd95db3 100644
--- a/arch/s390/kvm/priv.c
+++ b/arch/s390/kvm/priv.c
@@ -311,7 +311,7 @@ int kvm_s390_handle_b2(struct kvm_vcpu *vcpu)
 
 	/*
 	 * a lot of B2 instructions are priviledged. We first check for
-	 * the priviledges ones, that we can handle in the kernel. If the
+	 * the privileged ones, that we can handle in the kernel. If the
 	 * kernel can handle this instruction, we check for the problem
 	 * state bit and (a) handle the instruction or (b) send a code 2
 	 * program check.
diff --git a/arch/s390/mm/fault.c b/arch/s390/mm/fault.c
index 2c57806c0858..9217e332b118 100644
--- a/arch/s390/mm/fault.c
+++ b/arch/s390/mm/fault.c
@@ -392,7 +392,7 @@ void __kprobes do_protection_exception(struct pt_regs *regs, long pgm_int_code,
 {
 	int fault;
 
-	/* Protection exception is supressing, decrement psw address. */
+	/* Protection exception is suppressing, decrement psw address. */
 	regs->psw.addr -= (pgm_int_code >> 16);
 	/*
 	 * Check for low-address protection.  This needs to be treated
diff --git a/arch/s390/oprofile/hwsampler.c b/arch/s390/oprofile/hwsampler.c
index 3d48f4db246d..4952872d6f0a 100644
--- a/arch/s390/oprofile/hwsampler.c
+++ b/arch/s390/oprofile/hwsampler.c
@@ -517,12 +517,8 @@ stop_exit:
 
 static int check_hardware_prerequisites(void)
 {
-	unsigned long long facility_bits[2];
-
-	memcpy(facility_bits, S390_lowcore.stfle_fac_list, 32);
-	if (!(facility_bits[1] & (1ULL << 59)))
+	if (!test_facility(68))
 		return -EOPNOTSUPP;
-
 	return 0;
 }
 /*