diff options
Diffstat (limited to 'arch/ppc')
92 files changed, 146 insertions, 18138 deletions
diff --git a/arch/ppc/8260_io/enet.c b/arch/ppc/8260_io/enet.c index 06bb5b77ea62..25ef55bacd99 100644 --- a/arch/ppc/8260_io/enet.c +++ b/arch/ppc/8260_io/enet.c @@ -10,7 +10,7 @@ * This version of the driver is somewhat selectable for the different * processor/board combinations. It works for the boards I know about * now, and should be easily modified to include others. Some of the - * configuration information is contained in <asm/commproc.h> and the + * configuration information is contained in <asm/cpm1.h> and the * remainder is here. * * Buffer descriptors are kept in the CPM dual port RAM, and the frame diff --git a/arch/ppc/8xx_io/commproc.c b/arch/ppc/8xx_io/commproc.c index 9da880be4dc0..9d656de0f0f1 100644 --- a/arch/ppc/8xx_io/commproc.c +++ b/arch/ppc/8xx_io/commproc.c @@ -34,7 +34,7 @@ #include <asm/page.h> #include <asm/pgtable.h> #include <asm/8xx_immap.h> -#include <asm/commproc.h> +#include <asm/cpm1.h> #include <asm/io.h> #include <asm/tlbflush.h> #include <asm/rheap.h> @@ -55,8 +55,6 @@ }) static void m8xx_cpm_dpinit(void); -static uint host_buffer; /* One page of host buffer */ -static uint host_end; /* end + 1 */ cpm8xx_t *cpmp; /* Pointer to comm processor space */ /* CPM interrupt vector functions. @@ -68,7 +66,6 @@ struct cpm_action { static struct cpm_action cpm_vecs[CPMVEC_NR]; static irqreturn_t cpm_interrupt(int irq, void * dev); static irqreturn_t cpm_error_interrupt(int irq, void *dev); -static void alloc_host_memory(void); /* Define a table of names to identify CPM interrupt handlers in * /proc/interrupts. */ @@ -158,21 +155,6 @@ m8xx_cpm_reset(void) cpmp = (cpm8xx_t *)commproc; } -/* We used to do this earlier, but have to postpone as long as possible - * to ensure the kernel VM is now running. - */ -static void -alloc_host_memory(void) -{ - dma_addr_t physaddr; - - /* Set the host page for allocation. - */ - host_buffer = (uint)dma_alloc_coherent(NULL, PAGE_SIZE, &physaddr, - GFP_KERNEL); - host_end = host_buffer + PAGE_SIZE; -} - /* This is called during init_IRQ. We used to do it above, but this * was too early since init_IRQ was not yet called. */ @@ -319,26 +301,6 @@ cpm_free_handler(int cpm_vec) cpm_vecs[cpm_vec].dev_id = NULL; } -/* We also own one page of host buffer space for the allocation of - * UART "fifos" and the like. - */ -uint -m8xx_cpm_hostalloc(uint size) -{ - uint retloc; - - if (host_buffer == 0) - alloc_host_memory(); - - if ((host_buffer + size) >= host_end) - return(0); - - retloc = host_buffer; - host_buffer += size; - - return(retloc); -} - /* Set a baud rate generator. This needs lots of work. There are * four BRGs, any of which can be wired to any channel. * The internal baud rate clock is the system clock divided by 16. diff --git a/arch/ppc/8xx_io/enet.c b/arch/ppc/8xx_io/enet.c index eace3bc118d2..c6d047ae77ac 100644 --- a/arch/ppc/8xx_io/enet.c +++ b/arch/ppc/8xx_io/enet.c @@ -8,7 +8,7 @@ * This version of the driver is somewhat selectable for the different * processor/board combinations. It works for the boards I know about * now, and should be easily modified to include others. Some of the - * configuration information is contained in <asm/commproc.h> and the + * configuration information is contained in <asm/cpm1.h> and the * remainder is here. * * Buffer descriptors are kept in the CPM dual port RAM, and the frame @@ -43,7 +43,7 @@ #include <asm/pgtable.h> #include <asm/mpc8xx.h> #include <asm/uaccess.h> -#include <asm/commproc.h> +#include <asm/cpm1.h> #include <asm/cacheflush.h> /* @@ -80,7 +80,7 @@ * programming documents for details unique to your board. * * For the TQM8xx(L) modules, there is no control register interface. - * All functions are directly controlled using I/O pins. See <asm/commproc.h>. + * All functions are directly controlled using I/O pins. See <asm/cpm1.h>. */ /* The transmitter timeout diff --git a/arch/ppc/8xx_io/fec.c b/arch/ppc/8xx_io/fec.c index 0288279be9aa..11b0aa6ca97e 100644 --- a/arch/ppc/8xx_io/fec.c +++ b/arch/ppc/8xx_io/fec.c @@ -53,7 +53,7 @@ #include <asm/mpc8xx.h> #include <asm/irq.h> #include <asm/uaccess.h> -#include <asm/commproc.h> +#include <asm/cpm1.h> #ifdef CONFIG_USE_MDIO /* Forward declarations of some structures to support different PHYs diff --git a/arch/ppc/8xx_io/micropatch.c b/arch/ppc/8xx_io/micropatch.c index cfad46ba17e3..9a5d95da7c28 100644 --- a/arch/ppc/8xx_io/micropatch.c +++ b/arch/ppc/8xx_io/micropatch.c @@ -16,7 +16,7 @@ #include <asm/page.h> #include <asm/pgtable.h> #include <asm/8xx_immap.h> -#include <asm/commproc.h> +#include <asm/cpm1.h> /* * I2C/SPI relocation patch arrays. diff --git a/arch/ppc/Kconfig b/arch/ppc/Kconfig index 6473fa7cb4b9..db5934cdafb3 100644 --- a/arch/ppc/Kconfig +++ b/arch/ppc/Kconfig @@ -78,18 +78,18 @@ choice default 6xx config 6xx - bool "6xx/7xx/74xx/52xx/82xx/83xx" + bool "6xx/7xx/74xx/52xx/82xx" select PPC_FPU help There are four types of PowerPC chips supported. The more common types (601, 603, 604, 740, 750, 7400), the older Freescale (formerly Motorola) embedded versions (821, 823, 850, 855, 860, - 52xx, 82xx, 83xx), the IBM embedded versions (403 and 405) and + 52xx, 82xx), the IBM embedded versions (403 and 405) and the Book E embedded processors from IBM (44x) and Freescale (85xx). For support for 64-bit processors, set ARCH=powerpc. Unless you are building a kernel for one of the embedded processor systems, choose 6xx. - Also note that because the 52xx, 82xx, & 83xx family have a 603e + Also note that because the 52xx, 82xx family have a 603e core, specific support for that chipset is asked later on. config 40x @@ -104,12 +104,6 @@ config 8xx bool "8xx" select PPC_LIB_RHEAP -config E200 - bool "e200" - -config E500 - bool "e500" - endchoice config PPC_FPU @@ -124,25 +118,14 @@ config PPC_DCR depends on PPC_DCR_NATIVE default y -config BOOKE - bool - depends on E200 || E500 - default y - -config FSL_BOOKE - bool - depends on E200 || E500 - default y - config PTE_64BIT bool - depends on 44x || E500 + depends on 44x default y if 44x - default y if E500 && PHYS_64BIT config PHYS_64BIT - bool 'Large physical address support' if E500 - depends on 44x || E500 + bool + depends on 44x default y if 44x ---help--- This option enables kernel support for larger than 32-bit physical @@ -153,7 +136,7 @@ config PHYS_64BIT config ALTIVEC bool "AltiVec Support" depends on 6xx - depends on !8260 && !83xx + depends on !8260 ---help--- This option enables kernel support for the Altivec extensions to the PowerPC processor. The kernel currently supports saving and restoring @@ -167,24 +150,9 @@ config ALTIVEC If in doubt, say Y here. -config SPE - bool "SPE Support" - depends on E200 || E500 - ---help--- - This option enables kernel support for the Signal Processing - Extensions (SPE) to the PowerPC processor. The kernel currently - supports saving and restoring SPE registers, and turning on the - 'spe enable' bit so user processes can execute SPE instructions. - - This option is only useful if you have a processor that supports - SPE (e500, otherwise known as 85xx series), but does not have any - effect on a non-spe cpu (it does, however add code to the kernel). - - If in doubt, say Y here. - config TAU bool "Thermal Management Support" - depends on 6xx && !8260 && !83xx + depends on 6xx && !8260 help G3 and G4 processors have an on-chip temperature sensor called the 'Thermal Assist Unit (TAU)', which, in theory, can measure the on-die @@ -228,7 +196,7 @@ config TAU_AVERAGE config MATH_EMULATION bool "Math emulation" - depends on 4xx || 8xx || E200 || E500 + depends on 4xx || 8xx ---help--- Some PowerPC chips designed for embedded applications do not have a floating-point unit and therefore do not implement the @@ -279,7 +247,6 @@ config PPC601_SYNC_FIX If in doubt, say Y here. source arch/ppc/platforms/4xx/Kconfig -source arch/ppc/platforms/85xx/Kconfig config PPC_STD_MMU bool @@ -288,7 +255,7 @@ config PPC_STD_MMU config NOT_COHERENT_CACHE bool - depends on 4xx || 8xx || E200 + depends on 4xx || 8xx default y endmenu @@ -721,16 +688,6 @@ config LITE5200B Support for the LITE5200B dev board for the MPC5200 from Freescale. This is the new board with 2 PCI slots. -config MPC834x_SYS - bool "Freescale MPC834x SYS" - help - This option enables support for the MPC 834x SYS evaluation board. - - Be aware that PCI buses can only function when SYS board is plugged - into the PIB (Platform IO Board) board from Freescale which provide - 3 PCI slots. The PIBs PCI initialization is the bootloader's - responsibility. - config EV64360 bool "Marvell-EV64360BP" help @@ -774,18 +731,6 @@ config 8272 The MPC8272 CPM has a different internal dpram setup than other CPM2 devices -config 83xx - bool - default y if MPC834x_SYS - -config MPC834x - bool - default y if MPC834x_SYS - -config PPC_83xx - bool - default y if 83xx - config CPM1 bool depends on 8xx @@ -811,8 +756,7 @@ config PPC_GEN550 bool depends on SANDPOINT || SPRUCE || PPLUS || \ PRPMC750 || PRPMC800 || LOPEC || \ - (EV64260 && !SERIAL_MPSC) || CHESTNUT || RADSTONE_PPC7D || \ - 83xx + (EV64260 && !SERIAL_MPSC) || CHESTNUT || RADSTONE_PPC7D default y config FORCE @@ -1068,13 +1012,13 @@ config GENERIC_ISA_DMA config PPC_I8259 bool - default y if 85xx || PPC_PREP + default y if PPC_PREP default n config PPC_INDIRECT_PCI bool depends on PCI - default y if 40x || 44x || 85xx || 83xx || PPC_PREP + default y if 40x || 44x || PPC_PREP default n config EISA @@ -1091,8 +1035,8 @@ config MCA bool config PCI - bool "PCI support" if 40x || CPM2 || 83xx || 85xx || PPC_MPC52xx - default y if !40x && !CPM2 && !8xx && !83xx && !85xx + bool "PCI support" if 40x || CPM2 || PPC_MPC52xx + default y if !40x && !CPM2 && !8xx default PCI_QSPAN if !4xx && !CPM2 && 8xx help Find out whether your system includes a PCI bus. PCI is the name of @@ -1106,11 +1050,6 @@ config PCI_DOMAINS config PCI_SYSCALL def_bool PCI -config MPC83xx_PCI2 - bool "Support for 2nd PCI host controller" - depends on PCI && MPC834x - default y if MPC834x_SYS - config PCI_QSPAN bool "QSpan PCI" depends on !4xx && !CPM2 && 8xx diff --git a/arch/ppc/Makefile b/arch/ppc/Makefile index 95894ef7beaa..8df7f0e4c3a6 100644 --- a/arch/ppc/Makefile +++ b/arch/ppc/Makefile @@ -36,14 +36,8 @@ LINUXINCLUDE += -Iarch/$(ARCH)/include CHECKFLAGS += -D__powerpc__ -ifndef CONFIG_FSL_BOOKE -KBUILD_CFLAGS += -mstring -endif - cpu-as-$(CONFIG_4xx) += -Wa,-m405 cpu-as-$(CONFIG_6xx) += -Wa,-maltivec -cpu-as-$(CONFIG_E500) += -Wa,-me500 -cpu-as-$(CONFIG_E200) += -Wa,-me200 KBUILD_AFLAGS += $(cpu-as-y) KBUILD_CFLAGS += $(cpu-as-y) @@ -55,7 +49,6 @@ head-y := arch/ppc/kernel/head.o head-$(CONFIG_8xx) := arch/ppc/kernel/head_8xx.o head-$(CONFIG_4xx) := arch/ppc/kernel/head_4xx.o head-$(CONFIG_44x) := arch/ppc/kernel/head_44x.o -head-$(CONFIG_FSL_BOOKE) := arch/ppc/kernel/head_fsl_booke.o head-$(CONFIG_PPC_FPU) += arch/powerpc/kernel/fpu.o @@ -65,8 +58,6 @@ core-y += arch/ppc/kernel/ arch/powerpc/kernel/ \ arch/ppc/syslib/ arch/powerpc/sysdev/ \ arch/powerpc/lib/ core-$(CONFIG_4xx) += arch/ppc/platforms/4xx/ -core-$(CONFIG_83xx) += arch/ppc/platforms/83xx/ -core-$(CONFIG_85xx) += arch/ppc/platforms/85xx/ core-$(CONFIG_MATH_EMULATION) += arch/powerpc/math-emu/ core-$(CONFIG_XMON) += arch/ppc/xmon/ drivers-$(CONFIG_8xx) += arch/ppc/8xx_io/ diff --git a/arch/ppc/boot/simple/iic.c b/arch/ppc/boot/simple/iic.c index e4efd838bfaa..5e91489426b4 100644 --- a/arch/ppc/boot/simple/iic.c +++ b/arch/ppc/boot/simple/iic.c @@ -5,7 +5,7 @@ #include <linux/types.h> #include <asm/uaccess.h> #include <asm/mpc8xx.h> -#include <asm/commproc.h> +#include <asm/cpm1.h> /* IIC functions. diff --git a/arch/ppc/boot/simple/m8xx_tty.c b/arch/ppc/boot/simple/m8xx_tty.c index ea615d8ca541..f28924e6aeb4 100644 --- a/arch/ppc/boot/simple/m8xx_tty.c +++ b/arch/ppc/boot/simple/m8xx_tty.c @@ -11,7 +11,7 @@ #include <linux/types.h> #include <asm/uaccess.h> #include <asm/mpc8xx.h> -#include <asm/commproc.h> +#include <asm/cpm1.h> #ifdef CONFIG_MBX #define MBX_CSR1 ((volatile u_char *)0xfa100000) diff --git a/arch/ppc/configs/TQM8540_defconfig b/arch/ppc/configs/TQM8540_defconfig deleted file mode 100644 index f33f0e772dcb..000000000000 --- a/arch/ppc/configs/TQM8540_defconfig +++ /dev/null @@ -1,973 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.15-rc2 -# Fri Nov 25 17:26:50 2005 -# -CONFIG_MMU=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_PPC=y -CONFIG_PPC32=y -CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y -CONFIG_ARCH_MAY_HAVE_PC_FDC=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -# CONFIG_POSIX_MQUEUE is not set -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -# CONFIG_AUDIT is not set -# CONFIG_HOTPLUG is not set -CONFIG_KOBJECT_UEVENT=y -# CONFIG_IKCONFIG is not set -CONFIG_INITRAMFS_SOURCE="" -CONFIG_EMBEDDED=y -# CONFIG_KALLSYMS is not set -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -# CONFIG_EPOLL is not set -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# -# CONFIG_MODULES is not set - -# -# Block layer -# -# CONFIG_LBD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y -# CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" - -# -# Processor -# -# CONFIG_6xx is not set -# CONFIG_40x is not set -# CONFIG_44x is not set -# CONFIG_POWER3 is not set -# CONFIG_POWER4 is not set -# CONFIG_8xx is not set -# CONFIG_E200 is not set -CONFIG_E500=y -CONFIG_BOOKE=y -CONFIG_FSL_BOOKE=y -# CONFIG_PHYS_64BIT is not set -CONFIG_SPE=y -CONFIG_MATH_EMULATION=y -# CONFIG_KEXEC is not set -# CONFIG_CPU_FREQ is not set -# CONFIG_WANT_EARLY_SERIAL is not set -CONFIG_PPC_GEN550=y -CONFIG_85xx=y -CONFIG_PPC_INDIRECT_PCI_BE=y - -# -# Freescale 85xx options -# -# CONFIG_MPC8540_ADS is not set -# CONFIG_MPC8548_CDS is not set -# CONFIG_MPC8555_CDS is not set -# CONFIG_MPC8560_ADS is not set -# CONFIG_SBC8560 is not set -# CONFIG_STX_GP3 is not set -CONFIG_TQM8540=y -# CONFIG_TQM8541 is not set -# CONFIG_TQM8555 is not set -# CONFIG_TQM8560 is not set -CONFIG_MPC8540=y - -# -# Platform options -# -# CONFIG_HIGHMEM is not set -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y -# CONFIG_HZ_1000 is not set -CONFIG_HZ=250 -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set -# CONFIG_PREEMPT is not set -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -CONFIG_SPLIT_PTLOCK_CPUS=4 -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set -# CONFIG_CMDLINE_BOOL is not set -# CONFIG_PM is not set -# CONFIG_HIBERNATION is not set -CONFIG_SECCOMP=y -CONFIG_ISA_DMA_API=y - -# -# Bus options -# -CONFIG_PPC_I8259=y -CONFIG_PPC_INDIRECT_PCI=y -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -# CONFIG_PCI_LEGACY_PROC is not set - -# -# PCCARD (PCMCIA/CardBus) support -# -# CONFIG_PCCARD is not set -# CONFIG_RAPIDIO is not set - -# -# Advanced setup -# -# CONFIG_ADVANCED_OPTIONS is not set - -# -# Default settings for advanced configuration options are used -# -CONFIG_HIGHMEM_START=0xfe000000 -CONFIG_LOWMEM_SIZE=0x30000000 -CONFIG_KERNEL_START=0xc0000000 -CONFIG_TASK_SIZE=0x80000000 -CONFIG_BOOT_LOAD=0x00800000 - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_IEEE80211 is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set - -# -# Connector - unified userspace <-> kernelspace linker -# -# CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# -CONFIG_MTD=y -# CONFIG_MTD_DEBUG is not set -CONFIG_MTD_CONCAT=y -CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_REDBOOT_PARTS is not set -CONFIG_MTD_CMDLINE_PARTS=y - -# -# User Modules And Translation Layers -# -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set -# CONFIG_RFD_FTL is not set - -# -# RAM/ROM/Flash chip drivers -# -CONFIG_MTD_CFI=y -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_GEN_PROBE=y -# CONFIG_MTD_CFI_ADV_OPTIONS is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_CFI_INTELEXT is not set -CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_CFI_AMDSTD_RETRY=0 -# CONFIG_MTD_CFI_STAA is not set -CONFIG_MTD_CFI_UTIL=y -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_ABSENT is not set - -# -# Mapping drivers for chip access -# -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -# CONFIG_MTD_PHYSMAP is not set -CONFIG_MTD_TQM85xx=y -# CONFIG_MTD_PLATRAM is not set - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_PMC551 is not set -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLKMTD is not set -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# -# CONFIG_MTD_NAND is not set - -# -# OneNAND Flash Device Drivers -# -# CONFIG_MTD_ONENAND is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_DEV_FD is not set -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_SX8 is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=32768 -CONFIG_BLK_DEV_INITRD=y -# CONFIG_CDROM_PKTCDVD is not set -# CONFIG_ATA_OVER_ETH is not set - -# -# ATA/ATAPI/MFM/RLL support -# -CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y - -# -# Please see Documentation/ide.txt for help/info on IDE drives -# -# CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -# CONFIG_BLK_DEV_IDECD is not set -# CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set -# CONFIG_IDE_TASK_IOCTL is not set - -# -# IDE chipset support/bugfixes -# -CONFIG_IDE_GENERIC=y -CONFIG_BLK_DEV_IDEPCI=y -CONFIG_IDEPCI_SHARE_IRQ=y -# CONFIG_BLK_DEV_OFFBOARD is not set -CONFIG_BLK_DEV_GENERIC=y -# CONFIG_BLK_DEV_OPTI621 is not set -# CONFIG_BLK_DEV_SL82C105 is not set -CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -CONFIG_IDEDMA_PCI_AUTO=y -# CONFIG_IDEDMA_ONLYDISK is not set -# CONFIG_BLK_DEV_AEC62XX is not set -# CONFIG_BLK_DEV_ALI15X3 is not set -# CONFIG_BLK_DEV_AMD74XX is not set -# CONFIG_BLK_DEV_CMD64X is not set -# CONFIG_BLK_DEV_TRIFLEX is not set -# CONFIG_BLK_DEV_CY82C693 is not set -# CONFIG_BLK_DEV_CS5520 is not set -# CONFIG_BLK_DEV_CS5530 is not set -# CONFIG_BLK_DEV_HPT34X is not set -# CONFIG_BLK_DEV_HPT366 is not set -# CONFIG_BLK_DEV_SC1200 is not set -# CONFIG_BLK_DEV_PIIX is not set -# CONFIG_BLK_DEV_IT821X is not set -# CONFIG_BLK_DEV_NS87415 is not set -# CONFIG_BLK_DEV_PDC202XX_OLD is not set -# CONFIG_BLK_DEV_PDC202XX_NEW is not set -# CONFIG_BLK_DEV_SVWKS is not set -# CONFIG_BLK_DEV_SIIMAGE is not set -# CONFIG_BLK_DEV_SLC90E66 is not set -# CONFIG_BLK_DEV_TRM290 is not set -CONFIG_BLK_DEV_VIA82CXXX=y -# CONFIG_IDE_ARM is not set -CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_IDEDMA_IVB is not set -CONFIG_IDEDMA_AUTO=y -# CONFIG_BLK_DEV_HD is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -# CONFIG_SCSI is not set - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# -# CONFIG_I2O is not set - -# -# Macintosh device drivers -# -# CONFIG_WINDFARM is not set - -# -# Network device support -# -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set - -# -# PHY device support -# -CONFIG_PHYLIB=y - -# -# MII PHY device drivers -# -# CONFIG_MARVELL_PHY is not set -# CONFIG_DAVICOM_PHY is not set -# CONFIG_QSEMI_PHY is not set -# CONFIG_LXT_PHY is not set -# CONFIG_CICADA_PHY is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_CASSINI is not set -# CONFIG_NET_VENDOR_3COM is not set - -# -# Tulip family network device support -# -# CONFIG_NET_TULIP is not set -# CONFIG_HP100 is not set -CONFIG_NET_PCI=y -# CONFIG_PCNET32 is not set -# CONFIG_AMD8111_ETH is not set -# CONFIG_ADAPTEC_STARFIRE is not set -# CONFIG_B44 is not set -# CONFIG_FORCEDETH is not set -# CONFIG_DGRS is not set -# CONFIG_EEPRO100 is not set -CONFIG_E100=y -# CONFIG_FEALNX is not set -# CONFIG_NATSEMI is not set -# CONFIG_NE2K_PCI is not set -# CONFIG_8139CP is not set -# CONFIG_8139TOO is not set -# CONFIG_SIS900 is not set -# CONFIG_EPIC100 is not set -# CONFIG_SUNDANCE is not set -# CONFIG_TLAN is not set -# CONFIG_VIA_RHINE is not set - -# -# Ethernet (1000 Mbit) -# -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -# CONFIG_E1000 is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SIS190 is not set -# CONFIG_SKGE is not set -# CONFIG_SK98LIN is not set -# CONFIG_VIA_VELOCITY is not set -# CONFIG_TIGON3 is not set -# CONFIG_BNX2 is not set -CONFIG_GIANFAR=y -CONFIG_GFAR_NAPI=y - -# -# Ethernet (10000 Mbit) -# -# CONFIG_CHELSIO_T1 is not set -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set - -# -# Token Ring devices -# -# CONFIG_TR is not set - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y - -# -# Userland interfaces -# -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -# CONFIG_VT is not set -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=4 -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_JSM is not set -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_NVRAM is not set -CONFIG_GEN_RTC=y -# CONFIG_GEN_RTC_X is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_AGP is not set -# CONFIG_DRM is not set -# CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# -# CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set - -# -# I2C support -# -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y - -# -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# -# I2C Hardware Bus support -# -# CONFIG_I2C_ALI1535 is not set -# CONFIG_I2C_ALI1563 is not set -# CONFIG_I2C_ALI15X3 is not set -# CONFIG_I2C_AMD756 is not set -# CONFIG_I2C_AMD8111 is not set -# CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set -# CONFIG_I2C_PIIX4 is not set -CONFIG_I2C_MPC=y -# CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_SCx200_ACB is not set -# CONFIG_I2C_SIS5595 is not set -# CONFIG_I2C_SIS630 is not set -# CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_VIA is not set -# CONFIG_I2C_VIAPRO is not set -# CONFIG_I2C_VOODOO3 is not set -# CONFIG_I2C_PCA_ISA is not set - -# -# Miscellaneous I2C Chip support -# -CONFIG_SENSORS_DS1337=y -# CONFIG_SENSORS_DS1374 is not set -# CONFIG_SENSORS_EEPROM is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set -# CONFIG_SENSORS_M41T00 is not set -# CONFIG_SENSORS_MAX6875 is not set -# CONFIG_RTC_X1205_I2C is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set - -# -# Dallas's 1-wire bus -# -# CONFIG_W1 is not set - -# -# Hardware Monitoring support -# -CONFIG_HWMON=y -# CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_ADM1021 is not set -# CONFIG_SENSORS_ADM1025 is not set -# CONFIG_SENSORS_ADM1026 is not set -# CONFIG_SENSORS_ADM1031 is not set -# CONFIG_SENSORS_ADM9240 is not set -# CONFIG_SENSORS_ASB100 is not set -# CONFIG_SENSORS_ATXP1 is not set -# CONFIG_SENSORS_DS1621 is not set -# CONFIG_SENSORS_FSCHER is not set -# CONFIG_SENSORS_FSCPOS is not set -# CONFIG_SENSORS_GL518SM is not set -# CONFIG_SENSORS_GL520SM is not set -# CONFIG_SENSORS_IT87 is not set -# CONFIG_SENSORS_LM63 is not set -CONFIG_SENSORS_LM75=y -# CONFIG_SENSORS_LM77 is not set -# CONFIG_SENSORS_LM78 is not set -# CONFIG_SENSORS_LM80 is not set -# CONFIG_SENSORS_LM83 is not set -# CONFIG_SENSORS_LM85 is not set -# CONFIG_SENSORS_LM87 is not set -# CONFIG_SENSORS_LM90 is not set -# CONFIG_SENSORS_LM92 is not set -# CONFIG_SENSORS_MAX1619 is not set -# CONFIG_SENSORS_PC87360 is not set -# CONFIG_SENSORS_SIS5595 is not set -# CONFIG_SENSORS_SMSC47M1 is not set -# CONFIG_SENSORS_SMSC47B397 is not set -# CONFIG_SENSORS_VIA686A is not set -# CONFIG_SENSORS_W83781D is not set -# CONFIG_SENSORS_W83792D is not set -# CONFIG_SENSORS_W83L785TS is not set -# CONFIG_SENSORS_W83627HF is not set -# CONFIG_SENSORS_W83627EHF is not set -CONFIG_HWMON_DEBUG_CHIP=y - -# -# Misc devices -# - -# -# Multimedia Capabilities Port drivers -# - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -# CONFIG_FB is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -# CONFIG_USB is not set - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# InfiniBand support -# -# CONFIG_INFINIBAND is not set - -# -# SN Devices -# - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT2_FS_XIP is not set -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -# CONFIG_EXT3_FS_POSIX_ACL is not set -# CONFIG_EXT3_FS_SECURITY is not set -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FS_MBCACHE=y -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set -# CONFIG_XFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -CONFIG_INOTIFY=y -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y -# CONFIG_RELAYFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_JFFS_FS is not set -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_FS_DEBUG=0 -CONFIG_JFFS2_FS_WRITEBUFFER=y -# CONFIG_JFFS2_SUMMARY is not set -# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set -CONFIG_JFFS2_ZLIB=y -CONFIG_JFFS2_RTIME=y -# CONFIG_JFFS2_RUBIN is not set -CONFIG_CRAMFS=y -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -# CONFIG_NFS_V3 is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -# CONFIG_MSDOS_PARTITION is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_EFI_PARTITION is not set - -# -# Native Language Support -# -# CONFIG_NLS is not set - -# -# Library routines -# -# CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set -CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y -# CONFIG_PROFILING is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -# CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_SERIAL_TEXT_DEBUG is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -# CONFIG_CRYPTO is not set - -# -# Hardware crypto devices -# diff --git a/arch/ppc/configs/TQM8541_defconfig b/arch/ppc/configs/TQM8541_defconfig deleted file mode 100644 index e00cd62daa3f..000000000000 --- a/arch/ppc/configs/TQM8541_defconfig +++ /dev/null @@ -1,986 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.15-rc2 -# Wed Nov 30 13:36:28 2005 -# -CONFIG_MMU=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_PPC=y -CONFIG_PPC32=y -CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y -CONFIG_ARCH_MAY_HAVE_PC_FDC=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -# CONFIG_POSIX_MQUEUE is not set -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -# CONFIG_AUDIT is not set -# CONFIG_HOTPLUG is not set -CONFIG_KOBJECT_UEVENT=y -# CONFIG_IKCONFIG is not set -CONFIG_INITRAMFS_SOURCE="" -CONFIG_EMBEDDED=y -# CONFIG_KALLSYMS is not set -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -# CONFIG_EPOLL is not set -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# -# CONFIG_MODULES is not set - -# -# Block layer -# -# CONFIG_LBD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y -# CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" - -# -# Processor -# -# CONFIG_6xx is not set -# CONFIG_40x is not set -# CONFIG_44x is not set -# CONFIG_POWER3 is not set -# CONFIG_POWER4 is not set -# CONFIG_8xx is not set -# CONFIG_E200 is not set -CONFIG_E500=y -CONFIG_BOOKE=y -CONFIG_FSL_BOOKE=y -# CONFIG_PHYS_64BIT is not set -CONFIG_SPE=y -CONFIG_MATH_EMULATION=y -# CONFIG_KEXEC is not set -# CONFIG_CPU_FREQ is not set -# CONFIG_WANT_EARLY_SERIAL is not set -CONFIG_PPC_GEN550=y -CONFIG_85xx=y -CONFIG_PPC_INDIRECT_PCI_BE=y - -# -# Freescale 85xx options -# -# CONFIG_MPC8540_ADS is not set -# CONFIG_MPC8548_CDS is not set -# CONFIG_MPC8555_CDS is not set -# CONFIG_MPC8560_ADS is not set -# CONFIG_SBC8560 is not set -# CONFIG_STX_GP3 is not set -# CONFIG_TQM8540 is not set -CONFIG_TQM8541=y -# CONFIG_TQM8555 is not set -# CONFIG_TQM8560 is not set -CONFIG_MPC8555=y - -# -# Platform options -# -CONFIG_CPM2=y -# CONFIG_PC_KEYBOARD is not set -# CONFIG_HIGHMEM is not set -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y -# CONFIG_HZ_1000 is not set -CONFIG_HZ=250 -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set -# CONFIG_PREEMPT is not set -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -CONFIG_SPLIT_PTLOCK_CPUS=4 -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set -# CONFIG_CMDLINE_BOOL is not set -# CONFIG_PM is not set -# CONFIG_HIBERNATION is not set -CONFIG_SECCOMP=y -CONFIG_ISA_DMA_API=y - -# -# Bus options -# -CONFIG_PPC_I8259=y -CONFIG_PPC_INDIRECT_PCI=y -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -# CONFIG_PCI_LEGACY_PROC is not set - -# -# PCCARD (PCMCIA/CardBus) support -# -# CONFIG_PCCARD is not set - -# -# Advanced setup -# -# CONFIG_ADVANCED_OPTIONS is not set - -# -# Default settings for advanced configuration options are used -# -CONFIG_HIGHMEM_START=0xfe000000 -CONFIG_LOWMEM_SIZE=0x30000000 -CONFIG_KERNEL_START=0xc0000000 -CONFIG_TASK_SIZE=0x80000000 -CONFIG_BOOT_LOAD=0x00800000 - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_IEEE80211 is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set - -# -# Connector - unified userspace <-> kernelspace linker -# -# CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# -CONFIG_MTD=y -# CONFIG_MTD_DEBUG is not set -CONFIG_MTD_CONCAT=y -CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_REDBOOT_PARTS is not set -CONFIG_MTD_CMDLINE_PARTS=y - -# -# User Modules And Translation Layers -# -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set -# CONFIG_RFD_FTL is not set - -# -# RAM/ROM/Flash chip drivers -# -CONFIG_MTD_CFI=y -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_GEN_PROBE=y -# CONFIG_MTD_CFI_ADV_OPTIONS is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_CFI_INTELEXT is not set -CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_CFI_AMDSTD_RETRY=0 -# CONFIG_MTD_CFI_STAA is not set -CONFIG_MTD_CFI_UTIL=y -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_ABSENT is not set - -# -# Mapping drivers for chip access -# -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -# CONFIG_MTD_PHYSMAP is not set -CONFIG_MTD_TQM85xx=y -# CONFIG_MTD_PLATRAM is not set - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_PMC551 is not set -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLKMTD is not set -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# -# CONFIG_MTD_NAND is not set - -# -# OneNAND Flash Device Drivers -# -# CONFIG_MTD_ONENAND is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_DEV_FD is not set -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_SX8 is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=32768 -CONFIG_BLK_DEV_INITRD=y -# CONFIG_CDROM_PKTCDVD is not set -# CONFIG_ATA_OVER_ETH is not set - -# -# ATA/ATAPI/MFM/RLL support -# -CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y - -# -# Please see Documentation/ide.txt for help/info on IDE drives -# -# CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -# CONFIG_BLK_DEV_IDECD is not set -# CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set -# CONFIG_IDE_TASK_IOCTL is not set - -# -# IDE chipset support/bugfixes -# -CONFIG_IDE_GENERIC=y -CONFIG_BLK_DEV_IDEPCI=y -CONFIG_IDEPCI_SHARE_IRQ=y -# CONFIG_BLK_DEV_OFFBOARD is not set -CONFIG_BLK_DEV_GENERIC=y -# CONFIG_BLK_DEV_OPTI621 is not set -# CONFIG_BLK_DEV_SL82C105 is not set -CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -CONFIG_IDEDMA_PCI_AUTO=y -# CONFIG_IDEDMA_ONLYDISK is not set -# CONFIG_BLK_DEV_AEC62XX is not set -# CONFIG_BLK_DEV_ALI15X3 is not set -# CONFIG_BLK_DEV_AMD74XX is not set -# CONFIG_BLK_DEV_CMD64X is not set -# CONFIG_BLK_DEV_TRIFLEX is not set -# CONFIG_BLK_DEV_CY82C693 is not set -# CONFIG_BLK_DEV_CS5520 is not set -# CONFIG_BLK_DEV_CS5530 is not set -# CONFIG_BLK_DEV_HPT34X is not set -# CONFIG_BLK_DEV_HPT366 is not set -# CONFIG_BLK_DEV_SC1200 is not set -# CONFIG_BLK_DEV_PIIX is not set -# CONFIG_BLK_DEV_IT821X is not set -# CONFIG_BLK_DEV_NS87415 is not set -# CONFIG_BLK_DEV_PDC202XX_OLD is not set -# CONFIG_BLK_DEV_PDC202XX_NEW is not set -# CONFIG_BLK_DEV_SVWKS is not set -# CONFIG_BLK_DEV_SIIMAGE is not set -# CONFIG_BLK_DEV_SLC90E66 is not set -# CONFIG_BLK_DEV_TRM290 is not set -CONFIG_BLK_DEV_VIA82CXXX=y -# CONFIG_IDE_ARM is not set -CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_IDEDMA_IVB is not set -CONFIG_IDEDMA_AUTO=y -# CONFIG_BLK_DEV_HD is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -# CONFIG_SCSI is not set - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# -# CONFIG_I2O is not set - -# -# Macintosh device drivers -# -# CONFIG_WINDFARM is not set - -# -# Network device support -# -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set - -# -# PHY device support -# -CONFIG_PHYLIB=y - -# -# MII PHY device drivers -# -# CONFIG_MARVELL_PHY is not set -# CONFIG_DAVICOM_PHY is not set -# CONFIG_QSEMI_PHY is not set -# CONFIG_LXT_PHY is not set -# CONFIG_CICADA_PHY is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_CASSINI is not set -# CONFIG_NET_VENDOR_3COM is not set - -# -# Tulip family network device support -# -# CONFIG_NET_TULIP is not set -# CONFIG_HP100 is not set -CONFIG_NET_PCI=y -# CONFIG_PCNET32 is not set -# CONFIG_AMD8111_ETH is not set -# CONFIG_ADAPTEC_STARFIRE is not set -# CONFIG_B44 is not set -# CONFIG_FORCEDETH is not set -# CONFIG_DGRS is not set -# CONFIG_EEPRO100 is not set -CONFIG_E100=y -# CONFIG_FEALNX is not set -# CONFIG_NATSEMI is not set -# CONFIG_NE2K_PCI is not set -# CONFIG_8139CP is not set -# CONFIG_8139TOO is not set -# CONFIG_SIS900 is not set -# CONFIG_EPIC100 is not set -# CONFIG_SUNDANCE is not set -# CONFIG_TLAN is not set -# CONFIG_VIA_RHINE is not set -# CONFIG_FS_ENET is not set - -# -# Ethernet (1000 Mbit) -# -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -# CONFIG_E1000 is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SIS190 is not set -# CONFIG_SKGE is not set -# CONFIG_SK98LIN is not set -# CONFIG_VIA_VELOCITY is not set -# CONFIG_TIGON3 is not set -# CONFIG_BNX2 is not set -CONFIG_GIANFAR=y -CONFIG_GFAR_NAPI=y - -# -# Ethernet (10000 Mbit) -# -# CONFIG_CHELSIO_T1 is not set -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set - -# -# Token Ring devices -# -# CONFIG_TR is not set - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y - -# -# Userland interfaces -# -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -# CONFIG_VT is not set -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=4 -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_CPM is not set -# CONFIG_SERIAL_JSM is not set -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_NVRAM is not set -CONFIG_GEN_RTC=y -# CONFIG_GEN_RTC_X is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_AGP is not set -# CONFIG_DRM is not set -# CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# -# CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set - -# -# I2C support -# -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y - -# -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# -# I2C Hardware Bus support -# -# CONFIG_I2C_ALI1535 is not set -# CONFIG_I2C_ALI1563 is not set -# CONFIG_I2C_ALI15X3 is not set -# CONFIG_I2C_AMD756 is not set -# CONFIG_I2C_AMD8111 is not set -# CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set -# CONFIG_I2C_PIIX4 is not set -CONFIG_I2C_MPC=y -# CONFIG_I2C_MPC8260 is not set -# CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_SCx200_ACB is not set -# CONFIG_I2C_SIS5595 is not set -# CONFIG_I2C_SIS630 is not set -# CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_VIA is not set -# CONFIG_I2C_VIAPRO is not set -# CONFIG_I2C_VOODOO3 is not set -# CONFIG_I2C_PCA_ISA is not set - -# -# Miscellaneous I2C Chip support -# -CONFIG_SENSORS_DS1337=y -# CONFIG_SENSORS_DS1374 is not set -# CONFIG_SENSORS_EEPROM is not set -# CONFIG_SENSORS_MAX6900 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCF8563 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set -# CONFIG_SENSORS_M41T00 is not set -# CONFIG_SENSORS_MAX6875 is not set -# CONFIG_RTC_X1205_I2C is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set - -# -# Dallas's 1-wire bus -# -# CONFIG_W1 is not set - -# -# Hardware Monitoring support -# -CONFIG_HWMON=y -# CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_ADM1021 is not set -# CONFIG_SENSORS_ADM1025 is not set -# CONFIG_SENSORS_ADM1026 is not set -# CONFIG_SENSORS_ADM1031 is not set -# CONFIG_SENSORS_ADM9240 is not set -# CONFIG_SENSORS_ASB100 is not set -# CONFIG_SENSORS_ATXP1 is not set -# CONFIG_SENSORS_DS1621 is not set -# CONFIG_SENSORS_FSCHER is not set -# CONFIG_SENSORS_FSCPOS is not set -# CONFIG_SENSORS_GL518SM is not set -# CONFIG_SENSORS_GL520SM is not set -# CONFIG_SENSORS_IT87 is not set -# CONFIG_SENSORS_LM63 is not set -CONFIG_SENSORS_LM75=y -# CONFIG_SENSORS_LM77 is not set -# CONFIG_SENSORS_LM78 is not set -# CONFIG_SENSORS_LM80 is not set -# CONFIG_SENSORS_LM83 is not set -# CONFIG_SENSORS_LM85 is not set -# CONFIG_SENSORS_LM87 is not set -# CONFIG_SENSORS_LM90 is not set -# CONFIG_SENSORS_LM92 is not set -# CONFIG_SENSORS_MAX1619 is not set -# CONFIG_SENSORS_PC87360 is not set -# CONFIG_SENSORS_SIS5595 is not set -# CONFIG_SENSORS_SMSC47M1 is not set -# CONFIG_SENSORS_SMSC47B397 is not set -# CONFIG_SENSORS_VIA686A is not set -# CONFIG_SENSORS_W83781D is not set -# CONFIG_SENSORS_W83792D is not set -# CONFIG_SENSORS_W83L785TS is not set -# CONFIG_SENSORS_W83627HF is not set -# CONFIG_SENSORS_W83627EHF is not set -CONFIG_HWMON_DEBUG_CHIP=y - -# -# Misc devices -# - -# -# Multimedia Capabilities Port drivers -# - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -# CONFIG_FB is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -# CONFIG_USB is not set - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# InfiniBand support -# -# CONFIG_INFINIBAND is not set - -# -# SN Devices -# - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT2_FS_XIP is not set -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -# CONFIG_EXT3_FS_POSIX_ACL is not set -# CONFIG_EXT3_FS_SECURITY is not set -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FS_MBCACHE=y -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set -# CONFIG_XFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -CONFIG_INOTIFY=y -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y -# CONFIG_RELAYFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_JFFS_FS is not set -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_FS_DEBUG=0 -CONFIG_JFFS2_FS_WRITEBUFFER=y -# CONFIG_JFFS2_SUMMARY is not set -# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set -CONFIG_JFFS2_ZLIB=y -CONFIG_JFFS2_RTIME=y -# CONFIG_JFFS2_RUBIN is not set -CONFIG_CRAMFS=y -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -# CONFIG_NFS_V3 is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -# CONFIG_MSDOS_PARTITION is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_EFI_PARTITION is not set - -# -# Native Language Support -# -# CONFIG_NLS is not set -# CONFIG_SCC_ENET is not set -# CONFIG_FEC_ENET is not set - -# -# CPM2 Options -# - -# -# Library routines -# -# CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set -CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y -# CONFIG_PROFILING is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -# CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_KGDB_CONSOLE is not set -# CONFIG_SERIAL_TEXT_DEBUG is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -# CONFIG_CRYPTO is not set - -# -# Hardware crypto devices -# diff --git a/arch/ppc/configs/TQM8555_defconfig b/arch/ppc/configs/TQM8555_defconfig deleted file mode 100644 index 43a0d9df1e23..000000000000 --- a/arch/ppc/configs/TQM8555_defconfig +++ /dev/null @@ -1,983 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.15-rc2 -# Thu Nov 24 17:10:52 2005 -# -CONFIG_MMU=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_PPC=y -CONFIG_PPC32=y -CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y -CONFIG_ARCH_MAY_HAVE_PC_FDC=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -# CONFIG_POSIX_MQUEUE is not set -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -# CONFIG_AUDIT is not set -# CONFIG_HOTPLUG is not set -CONFIG_KOBJECT_UEVENT=y -# CONFIG_IKCONFIG is not set -CONFIG_INITRAMFS_SOURCE="" -CONFIG_EMBEDDED=y -# CONFIG_KALLSYMS is not set -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -# CONFIG_EPOLL is not set -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# -# CONFIG_MODULES is not set - -# -# Block layer -# -# CONFIG_LBD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y -# CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" - -# -# Processor -# -# CONFIG_6xx is not set -# CONFIG_40x is not set -# CONFIG_44x is not set -# CONFIG_POWER3 is not set -# CONFIG_POWER4 is not set -# CONFIG_8xx is not set -# CONFIG_E200 is not set -CONFIG_E500=y -CONFIG_BOOKE=y -CONFIG_FSL_BOOKE=y -# CONFIG_PHYS_64BIT is not set -CONFIG_SPE=y -CONFIG_MATH_EMULATION=y -# CONFIG_KEXEC is not set -# CONFIG_CPU_FREQ is not set -# CONFIG_WANT_EARLY_SERIAL is not set -CONFIG_PPC_GEN550=y -CONFIG_85xx=y -CONFIG_PPC_INDIRECT_PCI_BE=y - -# -# Freescale 85xx options -# -# CONFIG_MPC8540_ADS is not set -# CONFIG_MPC8548_CDS is not set -# CONFIG_MPC8555_CDS is not set -# CONFIG_MPC8560_ADS is not set -# CONFIG_SBC8560 is not set -# CONFIG_STX_GP3 is not set -# CONFIG_TQM8540 is not set -# CONFIG_TQM8541 is not set -CONFIG_TQM8555=y -# CONFIG_TQM8560 is not set -CONFIG_MPC8555=y - -# -# Platform options -# -CONFIG_CPM2=y -# CONFIG_PC_KEYBOARD is not set -# CONFIG_HIGHMEM is not set -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y -# CONFIG_HZ_1000 is not set -CONFIG_HZ=250 -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set -# CONFIG_PREEMPT is not set -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -CONFIG_SPLIT_PTLOCK_CPUS=4 -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set -# CONFIG_CMDLINE_BOOL is not set -# CONFIG_PM is not set -# CONFIG_HIBERNATION is not set -CONFIG_SECCOMP=y -CONFIG_ISA_DMA_API=y - -# -# Bus options -# -CONFIG_PPC_I8259=y -CONFIG_PPC_INDIRECT_PCI=y -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -# CONFIG_PCI_LEGACY_PROC is not set - -# -# PCCARD (PCMCIA/CardBus) support -# -# CONFIG_PCCARD is not set - -# -# Advanced setup -# -# CONFIG_ADVANCED_OPTIONS is not set - -# -# Default settings for advanced configuration options are used -# -CONFIG_HIGHMEM_START=0xfe000000 -CONFIG_LOWMEM_SIZE=0x30000000 -CONFIG_KERNEL_START=0xc0000000 -CONFIG_TASK_SIZE=0x80000000 -CONFIG_BOOT_LOAD=0x00800000 - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_IEEE80211 is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set - -# -# Connector - unified userspace <-> kernelspace linker -# -# CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# -CONFIG_MTD=y -# CONFIG_MTD_DEBUG is not set -CONFIG_MTD_CONCAT=y -CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_REDBOOT_PARTS is not set -CONFIG_MTD_CMDLINE_PARTS=y - -# -# User Modules And Translation Layers -# -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set -# CONFIG_RFD_FTL is not set - -# -# RAM/ROM/Flash chip drivers -# -CONFIG_MTD_CFI=y -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_GEN_PROBE=y -# CONFIG_MTD_CFI_ADV_OPTIONS is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_CFI_INTELEXT is not set -CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_CFI_AMDSTD_RETRY=0 -# CONFIG_MTD_CFI_STAA is not set -CONFIG_MTD_CFI_UTIL=y -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_ABSENT is not set - -# -# Mapping drivers for chip access -# -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -# CONFIG_MTD_PHYSMAP is not set -CONFIG_MTD_TQM85xx=y -# CONFIG_MTD_PLATRAM is not set - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_PMC551 is not set -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLKMTD is not set -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# -# CONFIG_MTD_NAND is not set - -# -# OneNAND Flash Device Drivers -# -# CONFIG_MTD_ONENAND is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_DEV_FD is not set -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_SX8 is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=32768 -CONFIG_BLK_DEV_INITRD=y -# CONFIG_CDROM_PKTCDVD is not set -# CONFIG_ATA_OVER_ETH is not set - -# -# ATA/ATAPI/MFM/RLL support -# -CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y - -# -# Please see Documentation/ide.txt for help/info on IDE drives -# -# CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -# CONFIG_BLK_DEV_IDECD is not set -# CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set -# CONFIG_IDE_TASK_IOCTL is not set - -# -# IDE chipset support/bugfixes -# -CONFIG_IDE_GENERIC=y -CONFIG_BLK_DEV_IDEPCI=y -CONFIG_IDEPCI_SHARE_IRQ=y -# CONFIG_BLK_DEV_OFFBOARD is not set -CONFIG_BLK_DEV_GENERIC=y -# CONFIG_BLK_DEV_OPTI621 is not set -# CONFIG_BLK_DEV_SL82C105 is not set -CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -CONFIG_IDEDMA_PCI_AUTO=y -# CONFIG_IDEDMA_ONLYDISK is not set -# CONFIG_BLK_DEV_AEC62XX is not set -# CONFIG_BLK_DEV_ALI15X3 is not set -# CONFIG_BLK_DEV_AMD74XX is not set -# CONFIG_BLK_DEV_CMD64X is not set -# CONFIG_BLK_DEV_TRIFLEX is not set -# CONFIG_BLK_DEV_CY82C693 is not set -# CONFIG_BLK_DEV_CS5520 is not set -# CONFIG_BLK_DEV_CS5530 is not set -# CONFIG_BLK_DEV_HPT34X is not set -# CONFIG_BLK_DEV_HPT366 is not set -# CONFIG_BLK_DEV_SC1200 is not set -# CONFIG_BLK_DEV_PIIX is not set -# CONFIG_BLK_DEV_IT821X is not set -# CONFIG_BLK_DEV_NS87415 is not set -# CONFIG_BLK_DEV_PDC202XX_OLD is not set -# CONFIG_BLK_DEV_PDC202XX_NEW is not set -# CONFIG_BLK_DEV_SVWKS is not set -# CONFIG_BLK_DEV_SIIMAGE is not set -# CONFIG_BLK_DEV_SLC90E66 is not set -# CONFIG_BLK_DEV_TRM290 is not set -CONFIG_BLK_DEV_VIA82CXXX=y -# CONFIG_IDE_ARM is not set -CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_IDEDMA_IVB is not set -CONFIG_IDEDMA_AUTO=y -# CONFIG_BLK_DEV_HD is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -# CONFIG_SCSI is not set - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# -# CONFIG_I2O is not set - -# -# Macintosh device drivers -# -# CONFIG_WINDFARM is not set - -# -# Network device support -# -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set - -# -# PHY device support -# -CONFIG_PHYLIB=y - -# -# MII PHY device drivers -# -# CONFIG_MARVELL_PHY is not set -# CONFIG_DAVICOM_PHY is not set -# CONFIG_QSEMI_PHY is not set -# CONFIG_LXT_PHY is not set -# CONFIG_CICADA_PHY is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_CASSINI is not set -# CONFIG_NET_VENDOR_3COM is not set - -# -# Tulip family network device support -# -# CONFIG_NET_TULIP is not set -# CONFIG_HP100 is not set -CONFIG_NET_PCI=y -# CONFIG_PCNET32 is not set -# CONFIG_AMD8111_ETH is not set -# CONFIG_ADAPTEC_STARFIRE is not set -# CONFIG_B44 is not set -# CONFIG_FORCEDETH is not set -# CONFIG_DGRS is not set -# CONFIG_EEPRO100 is not set -CONFIG_E100=y -# CONFIG_FEALNX is not set -# CONFIG_NATSEMI is not set -# CONFIG_NE2K_PCI is not set -# CONFIG_8139CP is not set -# CONFIG_8139TOO is not set -# CONFIG_SIS900 is not set -# CONFIG_EPIC100 is not set -# CONFIG_SUNDANCE is not set -# CONFIG_TLAN is not set -# CONFIG_VIA_RHINE is not set -# CONFIG_FS_ENET is not set - -# -# Ethernet (1000 Mbit) -# -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -# CONFIG_E1000 is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SIS190 is not set -# CONFIG_SKGE is not set -# CONFIG_SK98LIN is not set -# CONFIG_VIA_VELOCITY is not set -# CONFIG_TIGON3 is not set -# CONFIG_BNX2 is not set -CONFIG_GIANFAR=y -CONFIG_GFAR_NAPI=y - -# -# Ethernet (10000 Mbit) -# -# CONFIG_CHELSIO_T1 is not set -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set - -# -# Token Ring devices -# -# CONFIG_TR is not set - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y - -# -# Userland interfaces -# -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -# CONFIG_VT is not set -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=4 -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_CPM is not set -# CONFIG_SERIAL_JSM is not set -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_NVRAM is not set -CONFIG_GEN_RTC=y -# CONFIG_GEN_RTC_X is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_AGP is not set -# CONFIG_DRM is not set -# CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# -# CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set - -# -# I2C support -# -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y - -# -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# -# I2C Hardware Bus support -# -# CONFIG_I2C_ALI1535 is not set -# CONFIG_I2C_ALI1563 is not set -# CONFIG_I2C_ALI15X3 is not set -# CONFIG_I2C_AMD756 is not set -# CONFIG_I2C_AMD8111 is not set -# CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set -# CONFIG_I2C_PIIX4 is not set -CONFIG_I2C_MPC=y -# CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_SCx200_ACB is not set -# CONFIG_I2C_SIS5595 is not set -# CONFIG_I2C_SIS630 is not set -# CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_VIA is not set -# CONFIG_I2C_VIAPRO is not set -# CONFIG_I2C_VOODOO3 is not set -# CONFIG_I2C_PCA_ISA is not set - -# -# Miscellaneous I2C Chip support -# -CONFIG_SENSORS_DS1337=y -# CONFIG_SENSORS_DS1374 is not set -# CONFIG_SENSORS_EEPROM is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set -# CONFIG_SENSORS_M41T00 is not set -# CONFIG_SENSORS_MAX6875 is not set -# CONFIG_RTC_X1205_I2C is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set - -# -# Dallas's 1-wire bus -# -# CONFIG_W1 is not set - -# -# Hardware Monitoring support -# -CONFIG_HWMON=y -# CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_ADM1021 is not set -# CONFIG_SENSORS_ADM1025 is not set -# CONFIG_SENSORS_ADM1026 is not set -# CONFIG_SENSORS_ADM1031 is not set -# CONFIG_SENSORS_ADM9240 is not set -# CONFIG_SENSORS_ASB100 is not set -# CONFIG_SENSORS_ATXP1 is not set -# CONFIG_SENSORS_DS1621 is not set -# CONFIG_SENSORS_FSCHER is not set -# CONFIG_SENSORS_FSCPOS is not set -# CONFIG_SENSORS_GL518SM is not set -# CONFIG_SENSORS_GL520SM is not set -# CONFIG_SENSORS_IT87 is not set -# CONFIG_SENSORS_LM63 is not set -CONFIG_SENSORS_LM75=y -# CONFIG_SENSORS_LM77 is not set -# CONFIG_SENSORS_LM78 is not set -# CONFIG_SENSORS_LM80 is not set -# CONFIG_SENSORS_LM83 is not set -# CONFIG_SENSORS_LM85 is not set -# CONFIG_SENSORS_LM87 is not set -# CONFIG_SENSORS_LM90 is not set -# CONFIG_SENSORS_LM92 is not set -# CONFIG_SENSORS_MAX1619 is not set -# CONFIG_SENSORS_PC87360 is not set -# CONFIG_SENSORS_SIS5595 is not set -# CONFIG_SENSORS_SMSC47M1 is not set -# CONFIG_SENSORS_SMSC47B397 is not set -# CONFIG_SENSORS_VIA686A is not set -# CONFIG_SENSORS_W83781D is not set -# CONFIG_SENSORS_W83792D is not set -# CONFIG_SENSORS_W83L785TS is not set -# CONFIG_SENSORS_W83627HF is not set -# CONFIG_SENSORS_W83627EHF is not set -CONFIG_HWMON_DEBUG_CHIP=y - -# -# Misc devices -# - -# -# Multimedia Capabilities Port drivers -# - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -# CONFIG_FB is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -# CONFIG_USB is not set - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# InfiniBand support -# -# CONFIG_INFINIBAND is not set - -# -# SN Devices -# - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT2_FS_XIP is not set -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -# CONFIG_EXT3_FS_POSIX_ACL is not set -# CONFIG_EXT3_FS_SECURITY is not set -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FS_MBCACHE=y -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set -# CONFIG_XFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -CONFIG_INOTIFY=y -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y -# CONFIG_RELAYFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_JFFS_FS is not set -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_FS_DEBUG=0 -CONFIG_JFFS2_FS_WRITEBUFFER=y -# CONFIG_JFFS2_SUMMARY is not set -# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set -CONFIG_JFFS2_ZLIB=y -CONFIG_JFFS2_RTIME=y -# CONFIG_JFFS2_RUBIN is not set -CONFIG_CRAMFS=y -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -# CONFIG_NFS_V3 is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -# CONFIG_MSDOS_PARTITION is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_EFI_PARTITION is not set - -# -# Native Language Support -# -# CONFIG_NLS is not set -# CONFIG_SCC_ENET is not set -# CONFIG_FEC_ENET is not set - -# -# CPM2 Options -# - -# -# Library routines -# -# CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set -CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y -# CONFIG_PROFILING is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -# CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_KGDB_CONSOLE is not set -# CONFIG_SERIAL_TEXT_DEBUG is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -# CONFIG_CRYPTO is not set - -# -# Hardware crypto devices -# diff --git a/arch/ppc/configs/TQM8560_defconfig b/arch/ppc/configs/TQM8560_defconfig deleted file mode 100644 index a814d17a2be9..000000000000 --- a/arch/ppc/configs/TQM8560_defconfig +++ /dev/null @@ -1,992 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.15-rc2 -# Wed Nov 30 16:47:53 2005 -# -CONFIG_MMU=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_PPC=y -CONFIG_PPC32=y -CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y -CONFIG_ARCH_MAY_HAVE_PC_FDC=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -# CONFIG_POSIX_MQUEUE is not set -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -# CONFIG_AUDIT is not set -# CONFIG_HOTPLUG is not set -CONFIG_KOBJECT_UEVENT=y -# CONFIG_IKCONFIG is not set -CONFIG_INITRAMFS_SOURCE="" -CONFIG_EMBEDDED=y -# CONFIG_KALLSYMS is not set -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -# CONFIG_EPOLL is not set -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# -# CONFIG_MODULES is not set - -# -# Block layer -# -# CONFIG_LBD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y -# CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" - -# -# Processor -# -# CONFIG_6xx is not set -# CONFIG_40x is not set -# CONFIG_44x is not set -# CONFIG_POWER3 is not set -# CONFIG_POWER4 is not set -# CONFIG_8xx is not set -# CONFIG_E200 is not set -CONFIG_E500=y -CONFIG_BOOKE=y -CONFIG_FSL_BOOKE=y -# CONFIG_PHYS_64BIT is not set -CONFIG_SPE=y -CONFIG_MATH_EMULATION=y -# CONFIG_KEXEC is not set -# CONFIG_CPU_FREQ is not set -# CONFIG_WANT_EARLY_SERIAL is not set -CONFIG_85xx=y -CONFIG_PPC_INDIRECT_PCI_BE=y - -# -# Freescale 85xx options -# -# CONFIG_MPC8540_ADS is not set -# CONFIG_MPC8548_CDS is not set -# CONFIG_MPC8555_CDS is not set -# CONFIG_MPC8560_ADS is not set -# CONFIG_SBC8560 is not set -# CONFIG_STX_GP3 is not set -# CONFIG_TQM8540 is not set -# CONFIG_TQM8541 is not set -# CONFIG_TQM8555 is not set -CONFIG_TQM8560=y -CONFIG_MPC8560=y - -# -# Platform options -# -CONFIG_CPM2=y -# CONFIG_PC_KEYBOARD is not set -# CONFIG_HIGHMEM is not set -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y -# CONFIG_HZ_1000 is not set -CONFIG_HZ=250 -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set -# CONFIG_PREEMPT is not set -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -CONFIG_SPLIT_PTLOCK_CPUS=4 -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set -# CONFIG_CMDLINE_BOOL is not set -# CONFIG_PM is not set -# CONFIG_HIBERNATION is not set -CONFIG_SECCOMP=y -CONFIG_ISA_DMA_API=y - -# -# Bus options -# -CONFIG_PPC_I8259=y -CONFIG_PPC_INDIRECT_PCI=y -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -# CONFIG_PCI_LEGACY_PROC is not set - -# -# PCCARD (PCMCIA/CardBus) support -# -# CONFIG_PCCARD is not set -# CONFIG_RAPIDIO is not set - -# -# Advanced setup -# -# CONFIG_ADVANCED_OPTIONS is not set - -# -# Default settings for advanced configuration options are used -# -CONFIG_HIGHMEM_START=0xfe000000 -CONFIG_LOWMEM_SIZE=0x30000000 -CONFIG_KERNEL_START=0xc0000000 -CONFIG_TASK_SIZE=0x80000000 -CONFIG_BOOT_LOAD=0x00800000 - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_IEEE80211 is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set - -# -# Connector - unified userspace <-> kernelspace linker -# -# CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# -CONFIG_MTD=y -# CONFIG_MTD_DEBUG is not set -CONFIG_MTD_CONCAT=y -CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_REDBOOT_PARTS is not set -CONFIG_MTD_CMDLINE_PARTS=y - -# -# User Modules And Translation Layers -# -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set -# CONFIG_RFD_FTL is not set - -# -# RAM/ROM/Flash chip drivers -# -CONFIG_MTD_CFI=y -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_GEN_PROBE=y -# CONFIG_MTD_CFI_ADV_OPTIONS is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_CFI_INTELEXT is not set -CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_CFI_AMDSTD_RETRY=0 -# CONFIG_MTD_CFI_STAA is not set -CONFIG_MTD_CFI_UTIL=y -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_ABSENT is not set - -# -# Mapping drivers for chip access -# -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -# CONFIG_MTD_PHYSMAP is not set -CONFIG_MTD_TQM85xx=y -# CONFIG_MTD_PLATRAM is not set - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_PMC551 is not set -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLKMTD is not set -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# -# CONFIG_MTD_NAND is not set - -# -# OneNAND Flash Device Drivers -# -# CONFIG_MTD_ONENAND is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_DEV_FD is not set -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_SX8 is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=32768 -CONFIG_BLK_DEV_INITRD=y -# CONFIG_CDROM_PKTCDVD is not set -# CONFIG_ATA_OVER_ETH is not set - -# -# ATA/ATAPI/MFM/RLL support -# -CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y - -# -# Please see Documentation/ide.txt for help/info on IDE drives -# -# CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -# CONFIG_BLK_DEV_IDECD is not set -# CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set -# CONFIG_IDE_TASK_IOCTL is not set - -# -# IDE chipset support/bugfixes -# -CONFIG_IDE_GENERIC=y -CONFIG_BLK_DEV_IDEPCI=y -CONFIG_IDEPCI_SHARE_IRQ=y -# CONFIG_BLK_DEV_OFFBOARD is not set -CONFIG_BLK_DEV_GENERIC=y -# CONFIG_BLK_DEV_OPTI621 is not set -# CONFIG_BLK_DEV_SL82C105 is not set -CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -CONFIG_IDEDMA_PCI_AUTO=y -# CONFIG_IDEDMA_ONLYDISK is not set -# CONFIG_BLK_DEV_AEC62XX is not set -# CONFIG_BLK_DEV_ALI15X3 is not set -# CONFIG_BLK_DEV_AMD74XX is not set -# CONFIG_BLK_DEV_CMD64X is not set -# CONFIG_BLK_DEV_TRIFLEX is not set -# CONFIG_BLK_DEV_CY82C693 is not set -# CONFIG_BLK_DEV_CS5520 is not set -# CONFIG_BLK_DEV_CS5530 is not set -# CONFIG_BLK_DEV_HPT34X is not set -# CONFIG_BLK_DEV_HPT366 is not set -# CONFIG_BLK_DEV_SC1200 is not set -# CONFIG_BLK_DEV_PIIX is not set -# CONFIG_BLK_DEV_IT821X is not set -# CONFIG_BLK_DEV_NS87415 is not set -# CONFIG_BLK_DEV_PDC202XX_OLD is not set -# CONFIG_BLK_DEV_PDC202XX_NEW is not set -# CONFIG_BLK_DEV_SVWKS is not set -# CONFIG_BLK_DEV_SIIMAGE is not set -# CONFIG_BLK_DEV_SLC90E66 is not set -# CONFIG_BLK_DEV_TRM290 is not set -CONFIG_BLK_DEV_VIA82CXXX=y -# CONFIG_IDE_ARM is not set -CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_IDEDMA_IVB is not set -CONFIG_IDEDMA_AUTO=y -# CONFIG_BLK_DEV_HD is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -# CONFIG_SCSI is not set - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# -# CONFIG_I2O is not set - -# -# Macintosh device drivers -# -# CONFIG_WINDFARM is not set - -# -# Network device support -# -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set - -# -# PHY device support -# -CONFIG_PHYLIB=y - -# -# MII PHY device drivers -# -# CONFIG_MARVELL_PHY is not set -# CONFIG_DAVICOM_PHY is not set -# CONFIG_QSEMI_PHY is not set -# CONFIG_LXT_PHY is not set -# CONFIG_CICADA_PHY is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_CASSINI is not set -# CONFIG_NET_VENDOR_3COM is not set - -# -# Tulip family network device support -# -# CONFIG_NET_TULIP is not set -# CONFIG_HP100 is not set -CONFIG_NET_PCI=y -# CONFIG_PCNET32 is not set -# CONFIG_AMD8111_ETH is not set -# CONFIG_ADAPTEC_STARFIRE is not set -# CONFIG_B44 is not set -# CONFIG_FORCEDETH is not set -# CONFIG_DGRS is not set -# CONFIG_EEPRO100 is not set -CONFIG_E100=y -# CONFIG_FEALNX is not set -# CONFIG_NATSEMI is not set -# CONFIG_NE2K_PCI is not set -# CONFIG_8139CP is not set -# CONFIG_8139TOO is not set -# CONFIG_SIS900 is not set -# CONFIG_EPIC100 is not set -# CONFIG_SUNDANCE is not set -# CONFIG_TLAN is not set -# CONFIG_VIA_RHINE is not set -# CONFIG_FS_ENET is not set - -# -# Ethernet (1000 Mbit) -# -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -# CONFIG_E1000 is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SIS190 is not set -# CONFIG_SKGE is not set -# CONFIG_SK98LIN is not set -# CONFIG_VIA_VELOCITY is not set -# CONFIG_TIGON3 is not set -# CONFIG_BNX2 is not set -CONFIG_GIANFAR=y -CONFIG_GFAR_NAPI=y - -# -# Ethernet (10000 Mbit) -# -# CONFIG_CHELSIO_T1 is not set -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set - -# -# Token Ring devices -# -# CONFIG_TR is not set - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y - -# -# Userland interfaces -# -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -# CONFIG_VT is not set -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=4 -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_SERIAL_CPM=y -CONFIG_SERIAL_CPM_CONSOLE=y -CONFIG_SERIAL_CPM_SCC1=y -# CONFIG_SERIAL_CPM_SCC2 is not set -# CONFIG_SERIAL_CPM_SCC3 is not set -# CONFIG_SERIAL_CPM_SCC4 is not set -# CONFIG_SERIAL_CPM_SMC1 is not set -# CONFIG_SERIAL_CPM_SMC2 is not set -# CONFIG_SERIAL_JSM is not set -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_NVRAM is not set -CONFIG_GEN_RTC=y -# CONFIG_GEN_RTC_X is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_AGP is not set -# CONFIG_DRM is not set -# CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# -# CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set - -# -# I2C support -# -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y - -# -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# -# I2C Hardware Bus support -# -# CONFIG_I2C_ALI1535 is not set -# CONFIG_I2C_ALI1563 is not set -# CONFIG_I2C_ALI15X3 is not set -# CONFIG_I2C_AMD756 is not set -# CONFIG_I2C_AMD8111 is not set -# CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set -# CONFIG_I2C_PIIX4 is not set -CONFIG_I2C_MPC=y -# CONFIG_I2C_MPC8260 is not set -# CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_SCx200_ACB is not set -# CONFIG_I2C_SIS5595 is not set -# CONFIG_I2C_SIS630 is not set -# CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_VIA is not set -# CONFIG_I2C_VIAPRO is not set -# CONFIG_I2C_VOODOO3 is not set -# CONFIG_I2C_PCA_ISA is not set - -# -# Miscellaneous I2C Chip support -# -CONFIG_SENSORS_DS1337=y -# CONFIG_SENSORS_DS1374 is not set -# CONFIG_SENSORS_EEPROM is not set -# CONFIG_SENSORS_MAX6900 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCF8563 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set -# CONFIG_SENSORS_M41T00 is not set -# CONFIG_SENSORS_MAX6875 is not set -# CONFIG_RTC_X1205_I2C is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set - -# -# Dallas's 1-wire bus -# -# CONFIG_W1 is not set - -# -# Hardware Monitoring support -# -CONFIG_HWMON=y -# CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_ADM1021 is not set -# CONFIG_SENSORS_ADM1025 is not set -# CONFIG_SENSORS_ADM1026 is not set -# CONFIG_SENSORS_ADM1031 is not set -# CONFIG_SENSORS_ADM9240 is not set -# CONFIG_SENSORS_ASB100 is not set -# CONFIG_SENSORS_ATXP1 is not set -# CONFIG_SENSORS_DS1621 is not set -# CONFIG_SENSORS_FSCHER is not set -# CONFIG_SENSORS_FSCPOS is not set -# CONFIG_SENSORS_GL518SM is not set -# CONFIG_SENSORS_GL520SM is not set -# CONFIG_SENSORS_IT87 is not set -# CONFIG_SENSORS_LM63 is not set -CONFIG_SENSORS_LM75=y -# CONFIG_SENSORS_LM77 is not set -# CONFIG_SENSORS_LM78 is not set -# CONFIG_SENSORS_LM80 is not set -# CONFIG_SENSORS_LM83 is not set -# CONFIG_SENSORS_LM85 is not set -# CONFIG_SENSORS_LM87 is not set -# CONFIG_SENSORS_LM90 is not set -# CONFIG_SENSORS_LM92 is not set -# CONFIG_SENSORS_MAX1619 is not set -# CONFIG_SENSORS_PC87360 is not set -# CONFIG_SENSORS_SIS5595 is not set -# CONFIG_SENSORS_SMSC47M1 is not set -# CONFIG_SENSORS_SMSC47B397 is not set -# CONFIG_SENSORS_VIA686A is not set -# CONFIG_SENSORS_W83781D is not set -# CONFIG_SENSORS_W83792D is not set -# CONFIG_SENSORS_W83L785TS is not set -# CONFIG_SENSORS_W83627HF is not set -# CONFIG_SENSORS_W83627EHF is not set -CONFIG_HWMON_DEBUG_CHIP=y - -# -# Misc devices -# - -# -# Multimedia Capabilities Port drivers -# - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -# CONFIG_FB is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -# CONFIG_USB is not set - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# InfiniBand support -# -# CONFIG_INFINIBAND is not set - -# -# SN Devices -# - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT2_FS_XIP is not set -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -# CONFIG_EXT3_FS_POSIX_ACL is not set -# CONFIG_EXT3_FS_SECURITY is not set -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FS_MBCACHE=y -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set -# CONFIG_XFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -CONFIG_INOTIFY=y -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y -# CONFIG_RELAYFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_JFFS_FS is not set -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_FS_DEBUG=0 -CONFIG_JFFS2_FS_WRITEBUFFER=y -# CONFIG_JFFS2_SUMMARY is not set -# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set -CONFIG_JFFS2_ZLIB=y -CONFIG_JFFS2_RTIME=y -# CONFIG_JFFS2_RUBIN is not set -CONFIG_CRAMFS=y -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -# CONFIG_NFS_V3 is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -# CONFIG_MSDOS_PARTITION is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_EFI_PARTITION is not set - -# -# Native Language Support -# -# CONFIG_NLS is not set -# CONFIG_SCC_ENET is not set -# CONFIG_FEC_ENET is not set - -# -# CPM2 Options -# - -# -# Library routines -# -# CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set -CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y -# CONFIG_PROFILING is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -# CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_KGDB_CONSOLE is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -# CONFIG_CRYPTO is not set - -# -# Hardware crypto devices -# diff --git a/arch/ppc/configs/mpc834x_sys_defconfig b/arch/ppc/configs/mpc834x_sys_defconfig deleted file mode 100644 index d90c8a7e060c..000000000000 --- a/arch/ppc/configs/mpc834x_sys_defconfig +++ /dev/null @@ -1,844 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.14 -# Mon Nov 7 15:38:29 2005 -# -CONFIG_MMU=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_PPC=y -CONFIG_PPC32=y -CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y -CONFIG_ARCH_MAY_HAVE_PC_FDC=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -# CONFIG_POSIX_MQUEUE is not set -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -# CONFIG_AUDIT is not set -# CONFIG_HOTPLUG is not set -CONFIG_KOBJECT_UEVENT=y -# CONFIG_IKCONFIG is not set -CONFIG_INITRAMFS_SOURCE="" -CONFIG_EMBEDDED=y -# CONFIG_KALLSYMS is not set -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -# CONFIG_EPOLL is not set -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# -# CONFIG_MODULES is not set - -# -# Processor -# -CONFIG_6xx=y -# CONFIG_40x is not set -# CONFIG_44x is not set -# CONFIG_POWER3 is not set -# CONFIG_POWER4 is not set -# CONFIG_8xx is not set -# CONFIG_E200 is not set -# CONFIG_E500 is not set -CONFIG_PPC_FPU=y -# CONFIG_KEXEC is not set -# CONFIG_CPU_FREQ is not set -# CONFIG_WANT_EARLY_SERIAL is not set -CONFIG_PPC_GEN550=y -CONFIG_PPC_STD_MMU=y - -# -# Platform options -# -# CONFIG_PPC_MULTIPLATFORM is not set -# CONFIG_APUS is not set -# CONFIG_KATANA is not set -# CONFIG_WILLOW is not set -# CONFIG_CPCI690 is not set -# CONFIG_POWERPMC250 is not set -# CONFIG_CHESTNUT is not set -# CONFIG_SPRUCE is not set -# CONFIG_HDPU is not set -# CONFIG_EV64260 is not set -# CONFIG_LOPEC is not set -# CONFIG_MVME5100 is not set -# CONFIG_PPLUS is not set -# CONFIG_PRPMC750 is not set -# CONFIG_PRPMC800 is not set -# CONFIG_SANDPOINT is not set -# CONFIG_RADSTONE_PPC7D is not set -# CONFIG_PAL4 is not set -# CONFIG_GEMINI is not set -# CONFIG_EST8260 is not set -# CONFIG_SBC82xx is not set -# CONFIG_SBS8260 is not set -# CONFIG_RPX8260 is not set -# CONFIG_TQM8260 is not set -# CONFIG_ADS8272 is not set -# CONFIG_PQ2FADS is not set -# CONFIG_LITE5200 is not set -CONFIG_MPC834x_SYS=y -# CONFIG_EV64360 is not set -CONFIG_83xx=y -CONFIG_MPC834x=y -# CONFIG_SMP is not set -# CONFIG_HIGHMEM is not set -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y -# CONFIG_HZ_1000 is not set -CONFIG_HZ=250 -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set -# CONFIG_PREEMPT is not set -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -CONFIG_SPLIT_PTLOCK_CPUS=4 -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set -# CONFIG_CMDLINE_BOOL is not set -# CONFIG_PM is not set -# CONFIG_HIBERNATION is not set -CONFIG_SECCOMP=y -CONFIG_ISA_DMA_API=y - -# -# Bus options -# -CONFIG_GENERIC_ISA_DMA=y -# CONFIG_PPC_I8259 is not set -CONFIG_PPC_INDIRECT_PCI=y -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -# CONFIG_MPC83xx_PCI2 is not set -CONFIG_PCI_LEGACY_PROC=y - -# -# PCCARD (PCMCIA/CardBus) support -# -# CONFIG_PCCARD is not set - -# -# Advanced setup -# -# CONFIG_ADVANCED_OPTIONS is not set - -# -# Default settings for advanced configuration options are used -# -CONFIG_HIGHMEM_START=0xfe000000 -CONFIG_LOWMEM_SIZE=0x30000000 -CONFIG_KERNEL_START=0xc0000000 -CONFIG_TASK_SIZE=0x80000000 -CONFIG_BOOT_LOAD=0x00800000 - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_IEEE80211 is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set - -# -# Connector - unified userspace <-> kernelspace linker -# -# CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_DEV_FD is not set -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_SX8 is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=32768 -CONFIG_BLK_DEV_INITRD=y -# CONFIG_LBD is not set -# CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y -# CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" -# CONFIG_ATA_OVER_ETH is not set - -# -# ATA/ATAPI/MFM/RLL support -# -# CONFIG_IDE is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -# CONFIG_SCSI is not set - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# -# CONFIG_I2O is not set - -# -# Macintosh device drivers -# - -# -# Network device support -# -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set - -# -# PHY device support -# -CONFIG_PHYLIB=y - -# -# MII PHY device drivers -# -CONFIG_MARVELL_PHY=y -# CONFIG_DAVICOM_PHY is not set -# CONFIG_QSEMI_PHY is not set -# CONFIG_LXT_PHY is not set -# CONFIG_CICADA_PHY is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_CASSINI is not set -# CONFIG_NET_VENDOR_3COM is not set - -# -# Tulip family network device support -# -# CONFIG_NET_TULIP is not set -# CONFIG_HP100 is not set -CONFIG_NET_PCI=y -# CONFIG_PCNET32 is not set -# CONFIG_AMD8111_ETH is not set -# CONFIG_ADAPTEC_STARFIRE is not set -# CONFIG_B44 is not set -# CONFIG_FORCEDETH is not set -# CONFIG_DGRS is not set -# CONFIG_EEPRO100 is not set -CONFIG_E100=y -# CONFIG_FEALNX is not set -# CONFIG_NATSEMI is not set -# CONFIG_NE2K_PCI is not set -# CONFIG_8139CP is not set -# CONFIG_8139TOO is not set -# CONFIG_SIS900 is not set -# CONFIG_EPIC100 is not set -# CONFIG_SUNDANCE is not set -# CONFIG_TLAN is not set -# CONFIG_VIA_RHINE is not set - -# -# Ethernet (1000 Mbit) -# -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -CONFIG_E1000=y -# CONFIG_E1000_NAPI is not set -# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SIS190 is not set -# CONFIG_SKGE is not set -# CONFIG_SK98LIN is not set -# CONFIG_VIA_VELOCITY is not set -# CONFIG_TIGON3 is not set -# CONFIG_BNX2 is not set -CONFIG_GIANFAR=y -# CONFIG_GFAR_NAPI is not set - -# -# Ethernet (10000 Mbit) -# -# CONFIG_CHELSIO_T1 is not set -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set - -# -# Token Ring devices -# -# CONFIG_TR is not set - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y - -# -# Userland interfaces -# -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -# CONFIG_VT is not set -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=4 -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_JSM is not set -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_NVRAM is not set -CONFIG_GEN_RTC=y -# CONFIG_GEN_RTC_X is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_AGP is not set -# CONFIG_DRM is not set -# CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# -# CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set - -# -# I2C support -# -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y - -# -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# -# I2C Hardware Bus support -# -# CONFIG_I2C_ALI1535 is not set -# CONFIG_I2C_ALI1563 is not set -# CONFIG_I2C_ALI15X3 is not set -# CONFIG_I2C_AMD756 is not set -# CONFIG_I2C_AMD8111 is not set -# CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set -# CONFIG_I2C_PIIX4 is not set -CONFIG_I2C_MPC=y -# CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_SCx200_ACB is not set -# CONFIG_I2C_SIS5595 is not set -# CONFIG_I2C_SIS630 is not set -# CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_VIA is not set -# CONFIG_I2C_VIAPRO is not set -# CONFIG_I2C_VOODOO3 is not set -# CONFIG_I2C_PCA_ISA is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set -# CONFIG_SENSORS_EEPROM is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set -# CONFIG_SENSORS_M41T00 is not set -# CONFIG_SENSORS_MAX6875 is not set -# CONFIG_RTC_X1205_I2C is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set - -# -# Dallas's 1-wire bus -# -# CONFIG_W1 is not set - -# -# Hardware Monitoring support -# -CONFIG_HWMON=y -# CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_ADM1021 is not set -# CONFIG_SENSORS_ADM1025 is not set -# CONFIG_SENSORS_ADM1026 is not set -# CONFIG_SENSORS_ADM1031 is not set -# CONFIG_SENSORS_ADM9240 is not set -# CONFIG_SENSORS_ASB100 is not set -# CONFIG_SENSORS_ATXP1 is not set -# CONFIG_SENSORS_DS1621 is not set -# CONFIG_SENSORS_FSCHER is not set -# CONFIG_SENSORS_FSCPOS is not set -# CONFIG_SENSORS_GL518SM is not set -# CONFIG_SENSORS_GL520SM is not set -# CONFIG_SENSORS_IT87 is not set -# CONFIG_SENSORS_LM63 is not set -# CONFIG_SENSORS_LM75 is not set -# CONFIG_SENSORS_LM77 is not set -# CONFIG_SENSORS_LM78 is not set -# CONFIG_SENSORS_LM80 is not set -# CONFIG_SENSORS_LM83 is not set -# CONFIG_SENSORS_LM85 is not set -# CONFIG_SENSORS_LM87 is not set -# CONFIG_SENSORS_LM90 is not set -# CONFIG_SENSORS_LM92 is not set -# CONFIG_SENSORS_MAX1619 is not set -# CONFIG_SENSORS_PC87360 is not set -# CONFIG_SENSORS_SIS5595 is not set -# CONFIG_SENSORS_SMSC47M1 is not set -# CONFIG_SENSORS_SMSC47B397 is not set -# CONFIG_SENSORS_VIA686A is not set -# CONFIG_SENSORS_W83781D is not set -# CONFIG_SENSORS_W83792D is not set -# CONFIG_SENSORS_W83L785TS is not set -# CONFIG_SENSORS_W83627HF is not set -# CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set - -# -# Misc devices -# - -# -# Multimedia Capabilities Port drivers -# - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -# CONFIG_FB is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -# CONFIG_USB is not set - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# InfiniBand support -# -# CONFIG_INFINIBAND is not set - -# -# SN Devices -# - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT2_FS_XIP is not set -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -# CONFIG_EXT3_FS_POSIX_ACL is not set -# CONFIG_EXT3_FS_SECURITY is not set -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FS_MBCACHE=y -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set -# CONFIG_XFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -CONFIG_INOTIFY=y -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y -# CONFIG_RELAYFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -# CONFIG_NFS_V3 is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -# CONFIG_MSDOS_PARTITION is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_EFI_PARTITION is not set - -# -# Native Language Support -# -# CONFIG_NLS is not set - -# -# Library routines -# -# CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set -CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set - -# -# Profiling support -# -# CONFIG_PROFILING is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -# CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_SERIAL_TEXT_DEBUG is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -# CONFIG_CRYPTO is not set - -# -# Hardware crypto devices -# diff --git a/arch/ppc/configs/mpc8540_ads_defconfig b/arch/ppc/configs/mpc8540_ads_defconfig deleted file mode 100644 index bf676ebd99ab..000000000000 --- a/arch/ppc/configs/mpc8540_ads_defconfig +++ /dev/null @@ -1,706 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.11-rc1 -# Thu Jan 20 01:23:13 2005 -# -CONFIG_MMU=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_HAVE_DEC_LOCK=y -CONFIG_PPC=y -CONFIG_PPC32=y -CONFIG_GENERIC_NVRAM=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y -CONFIG_BROKEN_ON_SMP=y - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -# CONFIG_POSIX_MQUEUE is not set -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -# CONFIG_AUDIT is not set -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_HOTPLUG is not set -CONFIG_KOBJECT_UEVENT=y -# CONFIG_IKCONFIG is not set -CONFIG_EMBEDDED=y -# CONFIG_KALLSYMS is not set -CONFIG_FUTEX=y -# CONFIG_EPOLL is not set -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 -# CONFIG_TINY_SHMEM is not set - -# -# Loadable module support -# -# CONFIG_MODULES is not set - -# -# Processor -# -# CONFIG_6xx is not set -# CONFIG_40x is not set -# CONFIG_44x is not set -# CONFIG_POWER3 is not set -# CONFIG_POWER4 is not set -# CONFIG_8xx is not set -CONFIG_E500=y -CONFIG_BOOKE=y -CONFIG_FSL_BOOKE=y -CONFIG_SPE=y -CONFIG_MATH_EMULATION=y -# CONFIG_CPU_FREQ is not set -CONFIG_PPC_GEN550=y -CONFIG_85xx=y -CONFIG_PPC_INDIRECT_PCI_BE=y - -# -# Freescale 85xx options -# -CONFIG_MPC8540_ADS=y -# CONFIG_MPC8555_CDS is not set -# CONFIG_MPC8560_ADS is not set -# CONFIG_SBC8560 is not set -CONFIG_MPC8540=y - -# -# Platform options -# -# CONFIG_SMP is not set -# CONFIG_PREEMPT is not set -# CONFIG_HIGHMEM is not set -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set -# CONFIG_CMDLINE_BOOL is not set - -# -# Bus options -# -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -# CONFIG_PCI_LEGACY_PROC is not set -CONFIG_PCI_NAMES=y - -# -# PCCARD (PCMCIA/CardBus) support -# -# CONFIG_PCCARD is not set - -# -# PC-card bridges -# - -# -# Advanced setup -# -# CONFIG_ADVANCED_OPTIONS is not set - -# -# Default settings for advanced configuration options are used -# -CONFIG_HIGHMEM_START=0xfe000000 -CONFIG_LOWMEM_SIZE=0x30000000 -CONFIG_KERNEL_START=0xc0000000 -CONFIG_TASK_SIZE=0x80000000 -CONFIG_BOOT_LOAD=0x00800000 - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_DEV_FD is not set -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_SX8 is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=32768 -CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" -# CONFIG_LBD is not set -# CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_ATA_OVER_ETH is not set - -# -# ATA/ATAPI/MFM/RLL support -# -# CONFIG_IDE is not set - -# -# SCSI device support -# -# CONFIG_SCSI is not set - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# Fusion MPT device support -# - -# -# IEEE 1394 (FireWire) support -# -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# -# CONFIG_I2O is not set - -# -# Macintosh device drivers -# - -# -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -# CONFIG_NETLINK_DEV is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_IP_TCPDIAG=y -# CONFIG_IP_TCPDIAG_IPV6 is not set -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_NET_VENDOR_3COM is not set - -# -# Tulip family network device support -# -# CONFIG_NET_TULIP is not set -# CONFIG_HP100 is not set -# CONFIG_NET_PCI is not set - -# -# Ethernet (1000 Mbit) -# -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -# CONFIG_E1000 is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SK98LIN is not set -# CONFIG_TIGON3 is not set -CONFIG_GIANFAR=y -CONFIG_GFAR_NAPI=y - -# -# Ethernet (10000 Mbit) -# -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set - -# -# Token Ring devices -# -# CONFIG_TR is not set - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y - -# -# Userland interfaces -# -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input I/O drivers -# -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y -# CONFIG_SERIO is not set -# CONFIG_SERIO_I8042 is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Character devices -# -# CONFIG_VT is not set -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=4 -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_NVRAM is not set -CONFIG_GEN_RTC=y -# CONFIG_GEN_RTC_X is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_AGP is not set -# CONFIG_DRM is not set -# CONFIG_RAW_DRIVER is not set - -# -# I2C support -# -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y - -# -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# -# I2C Hardware Bus support -# -# CONFIG_I2C_ALI1535 is not set -# CONFIG_I2C_ALI1563 is not set -# CONFIG_I2C_ALI15X3 is not set -# CONFIG_I2C_AMD756 is not set -# CONFIG_I2C_AMD8111 is not set -# CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set -CONFIG_I2C_MPC=y -# CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PIIX4 is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_SCx200_ACB is not set -# CONFIG_I2C_SIS5595 is not set -# CONFIG_I2C_SIS630 is not set -# CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_VIA is not set -# CONFIG_I2C_VIAPRO is not set -# CONFIG_I2C_VOODOO3 is not set -# CONFIG_I2C_PCA_ISA is not set - -# -# Hardware Sensors Chip support -# -# CONFIG_I2C_SENSOR is not set -# CONFIG_SENSORS_ADM1021 is not set -# CONFIG_SENSORS_ADM1025 is not set -# CONFIG_SENSORS_ADM1026 is not set -# CONFIG_SENSORS_ADM1031 is not set -# CONFIG_SENSORS_ASB100 is not set -# CONFIG_SENSORS_DS1621 is not set -# CONFIG_SENSORS_FSCHER is not set -# CONFIG_SENSORS_GL518SM is not set -# CONFIG_SENSORS_IT87 is not set -# CONFIG_SENSORS_LM63 is not set -# CONFIG_SENSORS_LM75 is not set -# CONFIG_SENSORS_LM77 is not set -# CONFIG_SENSORS_LM78 is not set -# CONFIG_SENSORS_LM80 is not set -# CONFIG_SENSORS_LM83 is not set -# CONFIG_SENSORS_LM85 is not set -# CONFIG_SENSORS_LM87 is not set -# CONFIG_SENSORS_LM90 is not set -# CONFIG_SENSORS_MAX1619 is not set -# CONFIG_SENSORS_PC87360 is not set -# CONFIG_SENSORS_SMSC47B397 is not set -# CONFIG_SENSORS_SMSC47M1 is not set -# CONFIG_SENSORS_VIA686A is not set -# CONFIG_SENSORS_W83781D is not set -# CONFIG_SENSORS_W83L785TS is not set -# CONFIG_SENSORS_W83627HF is not set - -# -# Other I2C Chip support -# -# CONFIG_SENSORS_EEPROM is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set - -# -# Dallas's 1-wire bus -# -# CONFIG_W1 is not set - -# -# Misc devices -# - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -# CONFIG_FB is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -# CONFIG_USB is not set -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# InfiniBand support -# -# CONFIG_INFINIBAND is not set - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -# CONFIG_EXT3_FS_POSIX_ACL is not set -# CONFIG_EXT3_FS_SECURITY is not set -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FS_MBCACHE=y -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_XFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_SYSFS=y -# CONFIG_DEVFS_FS is not set -# CONFIG_DEVPTS_FS_XATTR is not set -CONFIG_TMPFS=y -# CONFIG_TMPFS_XATTR is not set -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -# CONFIG_NFS_V3 is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -# CONFIG_EXPORTFS is not set -CONFIG_SUNRPC=y -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -# CONFIG_MSDOS_PARTITION is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_EFI_PARTITION is not set - -# -# Native Language Support -# -# CONFIG_NLS is not set - -# -# Library routines -# -# CONFIG_CRC_CCITT is not set -CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set - -# -# Profiling support -# -# CONFIG_PROFILING is not set - -# -# Kernel hacking -# -# CONFIG_DEBUG_KERNEL is not set -# CONFIG_SERIAL_TEXT_DEBUG is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -# CONFIG_CRYPTO is not set - -# -# Hardware crypto devices -# diff --git a/arch/ppc/configs/mpc8548_cds_defconfig b/arch/ppc/configs/mpc8548_cds_defconfig deleted file mode 100644 index f36fc5db540b..000000000000 --- a/arch/ppc/configs/mpc8548_cds_defconfig +++ /dev/null @@ -1,658 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc4 -# Tue May 24 22:36:27 2005 -# -CONFIG_MMU=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_HAVE_DEC_LOCK=y -CONFIG_PPC=y -CONFIG_PPC32=y -CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -# CONFIG_POSIX_MQUEUE is not set -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -# CONFIG_AUDIT is not set -# CONFIG_HOTPLUG is not set -CONFIG_KOBJECT_UEVENT=y -# CONFIG_IKCONFIG is not set -CONFIG_EMBEDDED=y -# CONFIG_KALLSYMS is not set -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -# CONFIG_EPOLL is not set -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# -# CONFIG_MODULES is not set - -# -# Processor -# -# CONFIG_6xx is not set -# CONFIG_40x is not set -# CONFIG_44x is not set -# CONFIG_POWER3 is not set -# CONFIG_POWER4 is not set -# CONFIG_8xx is not set -CONFIG_E500=y -CONFIG_BOOKE=y -CONFIG_FSL_BOOKE=y -# CONFIG_PHYS_64BIT is not set -CONFIG_SPE=y -CONFIG_MATH_EMULATION=y -# CONFIG_CPU_FREQ is not set -# CONFIG_PM is not set -CONFIG_85xx=y -CONFIG_PPC_INDIRECT_PCI_BE=y - -# -# Freescale 85xx options -# -# CONFIG_MPC8540_ADS is not set -CONFIG_MPC8548_CDS=y -# CONFIG_MPC8555_CDS is not set -# CONFIG_MPC8560_ADS is not set -# CONFIG_SBC8560 is not set -# CONFIG_STX_GP3 is not set -CONFIG_MPC8548=y - -# -# Platform options -# -# CONFIG_SMP is not set -# CONFIG_PREEMPT is not set -# CONFIG_HIGHMEM is not set -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set -# CONFIG_CMDLINE_BOOL is not set -CONFIG_ISA_DMA_API=y - -# -# Bus options -# -# CONFIG_PCI is not set -# CONFIG_PCI_DOMAINS is not set - -# -# PCCARD (PCMCIA/CardBus) support -# -# CONFIG_PCCARD is not set - -# -# Advanced setup -# -# CONFIG_ADVANCED_OPTIONS is not set - -# -# Default settings for advanced configuration options are used -# -CONFIG_HIGHMEM_START=0xfe000000 -CONFIG_LOWMEM_SIZE=0x30000000 -CONFIG_KERNEL_START=0xc0000000 -CONFIG_TASK_SIZE=0x80000000 -CONFIG_BOOT_LOAD=0x00800000 - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_DEV_FD is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -# CONFIG_BLK_DEV_NBD is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=32768 -CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" -# CONFIG_LBD is not set -# CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_ATA_OVER_ETH is not set - -# -# ATA/ATAPI/MFM/RLL support -# -# CONFIG_IDE is not set - -# -# SCSI device support -# -# CONFIG_SCSI is not set - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# Fusion MPT device support -# - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# Macintosh device drivers -# - -# -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_IP_TCPDIAG=y -# CONFIG_IP_TCPDIAG_IPV6 is not set -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -CONFIG_MII=y - -# -# Ethernet (1000 Mbit) -# -CONFIG_GIANFAR=y -CONFIG_GFAR_NAPI=y - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices -# - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y - -# -# Userland interfaces -# -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y - -# -# Character devices -# -# CONFIG_VT is not set -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=4 -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_NVRAM is not set -CONFIG_GEN_RTC=y -# CONFIG_GEN_RTC_X is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_AGP is not set -# CONFIG_DRM is not set -# CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# - -# -# I2C support -# -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y - -# -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# -# I2C Hardware Bus support -# -CONFIG_I2C_MPC=y -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PCA_ISA is not set - -# -# Hardware Sensors Chip support -# -# CONFIG_I2C_SENSOR is not set -# CONFIG_SENSORS_ADM1021 is not set -# CONFIG_SENSORS_ADM1025 is not set -# CONFIG_SENSORS_ADM1026 is not set -# CONFIG_SENSORS_ADM1031 is not set -# CONFIG_SENSORS_ASB100 is not set -# CONFIG_SENSORS_DS1621 is not set -# CONFIG_SENSORS_FSCHER is not set -# CONFIG_SENSORS_FSCPOS is not set -# CONFIG_SENSORS_GL518SM is not set -# CONFIG_SENSORS_GL520SM is not set -# CONFIG_SENSORS_IT87 is not set -# CONFIG_SENSORS_LM63 is not set -# CONFIG_SENSORS_LM75 is not set -# CONFIG_SENSORS_LM77 is not set -# CONFIG_SENSORS_LM78 is not set -# CONFIG_SENSORS_LM80 is not set -# CONFIG_SENSORS_LM83 is not set -# CONFIG_SENSORS_LM85 is not set -# CONFIG_SENSORS_LM87 is not set -# CONFIG_SENSORS_LM90 is not set -# CONFIG_SENSORS_LM92 is not set -# CONFIG_SENSORS_MAX1619 is not set -# CONFIG_SENSORS_PC87360 is not set -# CONFIG_SENSORS_SMSC47B397 is not set -# CONFIG_SENSORS_SMSC47M1 is not set -# CONFIG_SENSORS_W83781D is not set -# CONFIG_SENSORS_W83L785TS is not set -# CONFIG_SENSORS_W83627HF is not set - -# -# Other I2C Chip support -# -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_EEPROM is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set -# CONFIG_SENSORS_M41T00 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set - -# -# Dallas's 1-wire bus -# -# CONFIG_W1 is not set - -# -# Misc devices -# - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -# CONFIG_FB is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -# CONFIG_USB_ARCH_HAS_HCD is not set -# CONFIG_USB_ARCH_HAS_OHCI is not set - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# InfiniBand support -# -# CONFIG_INFINIBAND is not set - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -# CONFIG_EXT3_FS_POSIX_ACL is not set -# CONFIG_EXT3_FS_SECURITY is not set -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FS_MBCACHE=y -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set - -# -# XFS support -# -# CONFIG_XFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_SYSFS=y -# CONFIG_DEVFS_FS is not set -# CONFIG_DEVPTS_FS_XATTR is not set -CONFIG_TMPFS=y -# CONFIG_TMPFS_XATTR is not set -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -# CONFIG_NFS_V3 is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_SUNRPC=y -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -# CONFIG_MSDOS_PARTITION is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_EFI_PARTITION is not set - -# -# Native Language Support -# -# CONFIG_NLS is not set - -# -# Library routines -# -# CONFIG_CRC_CCITT is not set -CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set - -# -# Profiling support -# -# CONFIG_PROFILING is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -# CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -# CONFIG_CRYPTO is not set - -# -# Hardware crypto devices -# diff --git a/arch/ppc/configs/mpc8555_cds_defconfig b/arch/ppc/configs/mpc8555_cds_defconfig deleted file mode 100644 index 4f1e320acfbe..000000000000 --- a/arch/ppc/configs/mpc8555_cds_defconfig +++ /dev/null @@ -1,784 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc4 -# Tue May 17 11:56:01 2005 -# -CONFIG_MMU=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_HAVE_DEC_LOCK=y -CONFIG_PPC=y -CONFIG_PPC32=y -CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -# CONFIG_POSIX_MQUEUE is not set -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -# CONFIG_AUDIT is not set -# CONFIG_HOTPLUG is not set -CONFIG_KOBJECT_UEVENT=y -# CONFIG_IKCONFIG is not set -CONFIG_EMBEDDED=y -# CONFIG_KALLSYMS is not set -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -# CONFIG_EPOLL is not set -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# -# CONFIG_MODULES is not set - -# -# Processor -# -# CONFIG_6xx is not set -# CONFIG_40x is not set -# CONFIG_44x is not set -# CONFIG_POWER3 is not set -# CONFIG_POWER4 is not set -# CONFIG_8xx is not set -CONFIG_E500=y -CONFIG_BOOKE=y -CONFIG_FSL_BOOKE=y -# CONFIG_PHYS_64BIT is not set -CONFIG_SPE=y -CONFIG_MATH_EMULATION=y -# CONFIG_CPU_FREQ is not set -CONFIG_PPC_GEN550=y -# CONFIG_PM is not set -CONFIG_85xx=y -CONFIG_PPC_INDIRECT_PCI_BE=y - -# -# Freescale 85xx options -# -# CONFIG_MPC8540_ADS is not set -CONFIG_MPC8555_CDS=y -# CONFIG_MPC8560_ADS is not set -# CONFIG_SBC8560 is not set -# CONFIG_STX_GP3 is not set -CONFIG_MPC8555=y -CONFIG_85xx_PCI2=y - -# -# Platform options -# -CONFIG_CPM2=y -# CONFIG_PC_KEYBOARD is not set -# CONFIG_SMP is not set -# CONFIG_PREEMPT is not set -# CONFIG_HIGHMEM is not set -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set -# CONFIG_CMDLINE_BOOL is not set -CONFIG_ISA_DMA_API=y - -# -# Bus options -# -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -# CONFIG_PCI_LEGACY_PROC is not set -CONFIG_PCI_NAMES=y - -# -# PCCARD (PCMCIA/CardBus) support -# -# CONFIG_PCCARD is not set - -# -# Advanced setup -# -# CONFIG_ADVANCED_OPTIONS is not set - -# -# Default settings for advanced configuration options are used -# -CONFIG_HIGHMEM_START=0xfe000000 -CONFIG_LOWMEM_SIZE=0x30000000 -CONFIG_KERNEL_START=0xc0000000 -CONFIG_TASK_SIZE=0x80000000 -CONFIG_BOOT_LOAD=0x00800000 - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_DEV_FD is not set -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_SX8 is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=32768 -CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" -# CONFIG_LBD is not set -# CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_ATA_OVER_ETH is not set - -# -# ATA/ATAPI/MFM/RLL support -# -CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y - -# -# Please see Documentation/ide.txt for help/info on IDE drives -# -# CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -# CONFIG_BLK_DEV_IDECD is not set -# CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set -# CONFIG_IDE_TASK_IOCTL is not set - -# -# IDE chipset support/bugfixes -# -CONFIG_IDE_GENERIC=y -CONFIG_BLK_DEV_IDEPCI=y -CONFIG_IDEPCI_SHARE_IRQ=y -# CONFIG_BLK_DEV_OFFBOARD is not set -CONFIG_BLK_DEV_GENERIC=y -# CONFIG_BLK_DEV_OPTI621 is not set -# CONFIG_BLK_DEV_SL82C105 is not set -CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -CONFIG_IDEDMA_PCI_AUTO=y -# CONFIG_IDEDMA_ONLYDISK is not set -# CONFIG_BLK_DEV_AEC62XX is not set -# CONFIG_BLK_DEV_ALI15X3 is not set -# CONFIG_BLK_DEV_AMD74XX is not set -# CONFIG_BLK_DEV_CMD64X is not set -# CONFIG_BLK_DEV_TRIFLEX is not set -# CONFIG_BLK_DEV_CY82C693 is not set -# CONFIG_BLK_DEV_CS5520 is not set -# CONFIG_BLK_DEV_CS5530 is not set -# CONFIG_BLK_DEV_HPT34X is not set -# CONFIG_BLK_DEV_HPT366 is not set -# CONFIG_BLK_DEV_SC1200 is not set -# CONFIG_BLK_DEV_PIIX is not set -# CONFIG_BLK_DEV_NS87415 is not set -# CONFIG_BLK_DEV_PDC202XX_OLD is not set -# CONFIG_BLK_DEV_PDC202XX_NEW is not set -# CONFIG_BLK_DEV_SVWKS is not set -# CONFIG_BLK_DEV_SIIMAGE is not set -# CONFIG_BLK_DEV_SLC90E66 is not set -# CONFIG_BLK_DEV_TRM290 is not set -CONFIG_BLK_DEV_VIA82CXXX=y -# CONFIG_IDE_ARM is not set -CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_IDEDMA_IVB is not set -CONFIG_IDEDMA_AUTO=y -# CONFIG_BLK_DEV_HD is not set - -# -# SCSI device support -# -# CONFIG_SCSI is not set - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# Fusion MPT device support -# - -# -# IEEE 1394 (FireWire) support -# -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# -# CONFIG_I2O is not set - -# -# Macintosh device drivers -# - -# -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_IP_TCPDIAG=y -# CONFIG_IP_TCPDIAG_IPV6 is not set -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_NET_VENDOR_3COM is not set - -# -# Tulip family network device support -# -# CONFIG_NET_TULIP is not set -# CONFIG_HP100 is not set -# CONFIG_NET_PCI is not set - -# -# Ethernet (1000 Mbit) -# -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -# CONFIG_E1000 is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SK98LIN is not set -# CONFIG_TIGON3 is not set -CONFIG_GIANFAR=y -CONFIG_GFAR_NAPI=y - -# -# Ethernet (10000 Mbit) -# -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set - -# -# Token Ring devices -# -# CONFIG_TR is not set - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y - -# -# Userland interfaces -# -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y - -# -# Character devices -# -# CONFIG_VT is not set -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=4 -# CONFIG_SERIAL_8250_EXTENDED is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_CPM is not set -# CONFIG_SERIAL_JSM is not set -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_NVRAM is not set -CONFIG_GEN_RTC=y -# CONFIG_GEN_RTC_X is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_AGP is not set -# CONFIG_DRM is not set -# CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# -# CONFIG_TCG_TPM is not set - -# -# I2C support -# -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y - -# -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# -# I2C Hardware Bus support -# -# CONFIG_I2C_ALI1535 is not set -# CONFIG_I2C_ALI1563 is not set -# CONFIG_I2C_ALI15X3 is not set -# CONFIG_I2C_AMD756 is not set -# CONFIG_I2C_AMD8111 is not set -# CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set -# CONFIG_I2C_PIIX4 is not set -CONFIG_I2C_MPC=y -# CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_SCx200_ACB is not set -# CONFIG_I2C_SIS5595 is not set -# CONFIG_I2C_SIS630 is not set -# CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_VIA is not set -# CONFIG_I2C_VIAPRO is not set -# CONFIG_I2C_VOODOO3 is not set -# CONFIG_I2C_PCA_ISA is not set - -# -# Hardware Sensors Chip support -# -# CONFIG_I2C_SENSOR is not set -# CONFIG_SENSORS_ADM1021 is not set -# CONFIG_SENSORS_ADM1025 is not set -# CONFIG_SENSORS_ADM1026 is not set -# CONFIG_SENSORS_ADM1031 is not set -# CONFIG_SENSORS_ASB100 is not set -# CONFIG_SENSORS_DS1621 is not set -# CONFIG_SENSORS_FSCHER is not set -# CONFIG_SENSORS_FSCPOS is not set -# CONFIG_SENSORS_GL518SM is not set -# CONFIG_SENSORS_GL520SM is not set -# CONFIG_SENSORS_IT87 is not set -# CONFIG_SENSORS_LM63 is not set -# CONFIG_SENSORS_LM75 is not set -# CONFIG_SENSORS_LM77 is not set -# CONFIG_SENSORS_LM78 is not set -# CONFIG_SENSORS_LM80 is not set -# CONFIG_SENSORS_LM83 is not set -# CONFIG_SENSORS_LM85 is not set -# CONFIG_SENSORS_LM87 is not set -# CONFIG_SENSORS_LM90 is not set -# CONFIG_SENSORS_LM92 is not set -# CONFIG_SENSORS_MAX1619 is not set -# CONFIG_SENSORS_PC87360 is not set -# CONFIG_SENSORS_SMSC47B397 is not set -# CONFIG_SENSORS_SIS5595 is not set -# CONFIG_SENSORS_SMSC47M1 is not set -# CONFIG_SENSORS_VIA686A is not set -# CONFIG_SENSORS_W83781D is not set -# CONFIG_SENSORS_W83L785TS is not set -# CONFIG_SENSORS_W83627HF is not set - -# -# Other I2C Chip support -# -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_EEPROM is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set -# CONFIG_SENSORS_M41T00 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set - -# -# Dallas's 1-wire bus -# -# CONFIG_W1 is not set - -# -# Misc devices -# - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -# CONFIG_FB is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -# CONFIG_USB is not set - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# InfiniBand support -# -# CONFIG_INFINIBAND is not set - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -# CONFIG_EXT3_FS_POSIX_ACL is not set -# CONFIG_EXT3_FS_SECURITY is not set -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FS_MBCACHE=y -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set - -# -# XFS support -# -# CONFIG_XFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_SYSFS=y -# CONFIG_DEVFS_FS is not set -# CONFIG_DEVPTS_FS_XATTR is not set -CONFIG_TMPFS=y -# CONFIG_TMPFS_XATTR is not set -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -# CONFIG_NFS_V3 is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_SUNRPC=y -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -# CONFIG_MSDOS_PARTITION is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_EFI_PARTITION is not set - -# -# Native Language Support -# -# CONFIG_NLS is not set -# CONFIG_SCC_ENET is not set -# CONFIG_FEC_ENET is not set - -# -# CPM2 Options -# - -# -# Library routines -# -# CONFIG_CRC_CCITT is not set -CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set - -# -# Profiling support -# -# CONFIG_PROFILING is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -# CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_KGDB_CONSOLE is not set -# CONFIG_SERIAL_TEXT_DEBUG is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -# CONFIG_CRYPTO is not set - -# -# Hardware crypto devices -# diff --git a/arch/ppc/configs/mpc8560_ads_defconfig b/arch/ppc/configs/mpc8560_ads_defconfig deleted file mode 100644 index f12d48fcbba7..000000000000 --- a/arch/ppc/configs/mpc8560_ads_defconfig +++ /dev/null @@ -1,769 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.13-rc6 -# Thu Aug 11 18:14:45 2005 -# -CONFIG_MMU=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_HAVE_DEC_LOCK=y -CONFIG_PPC=y -CONFIG_PPC32=y -CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -# CONFIG_POSIX_MQUEUE is not set -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -# CONFIG_AUDIT is not set -# CONFIG_HOTPLUG is not set -CONFIG_KOBJECT_UEVENT=y -# CONFIG_IKCONFIG is not set -CONFIG_EMBEDDED=y -# CONFIG_KALLSYMS is not set -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -# CONFIG_EPOLL is not set -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# -# CONFIG_MODULES is not set - -# -# Processor -# -# CONFIG_6xx is not set -# CONFIG_40x is not set -# CONFIG_44x is not set -# CONFIG_POWER3 is not set -# CONFIG_POWER4 is not set -# CONFIG_8xx is not set -# CONFIG_E200 is not set -CONFIG_E500=y -CONFIG_BOOKE=y -CONFIG_FSL_BOOKE=y -# CONFIG_PHYS_64BIT is not set -CONFIG_SPE=y -CONFIG_MATH_EMULATION=y -# CONFIG_KEXEC is not set -# CONFIG_CPU_FREQ is not set -# CONFIG_PM is not set -CONFIG_85xx=y -CONFIG_PPC_INDIRECT_PCI_BE=y - -# -# Freescale 85xx options -# -# CONFIG_MPC8540_ADS is not set -# CONFIG_MPC8548_CDS is not set -# CONFIG_MPC8555_CDS is not set -CONFIG_MPC8560_ADS=y -# CONFIG_SBC8560 is not set -# CONFIG_STX_GP3 is not set -CONFIG_MPC8560=y - -# -# Platform options -# -CONFIG_CPM2=y -# CONFIG_PC_KEYBOARD is not set -# CONFIG_SMP is not set -# CONFIG_HIGHMEM is not set -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y -# CONFIG_HZ_1000 is not set -CONFIG_HZ=250 -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set -# CONFIG_PREEMPT is not set -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set -# CONFIG_CMDLINE_BOOL is not set -CONFIG_SECCOMP=y -CONFIG_ISA_DMA_API=y - -# -# Bus options -# -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -# CONFIG_PCI_LEGACY_PROC is not set -CONFIG_PCI_NAMES=y - -# -# PCCARD (PCMCIA/CardBus) support -# -# CONFIG_PCCARD is not set - -# -# Advanced setup -# -# CONFIG_ADVANCED_OPTIONS is not set - -# -# Default settings for advanced configuration options are used -# -CONFIG_HIGHMEM_START=0xfe000000 -CONFIG_LOWMEM_SIZE=0x30000000 -CONFIG_KERNEL_START=0xc0000000 -CONFIG_TASK_SIZE=0x80000000 -CONFIG_BOOT_LOAD=0x00800000 - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_IP_MROUTE is not set -# CONFIG_ARPD is not set -CONFIG_SYN_COOKIES=y -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_IP_TCPDIAG=y -# CONFIG_IP_TCPDIAG_IPV6 is not set -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_DEV_FD is not set -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_SX8 is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=32768 -CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" -# CONFIG_LBD is not set -# CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_ATA_OVER_ETH is not set - -# -# ATA/ATAPI/MFM/RLL support -# -# CONFIG_IDE is not set - -# -# SCSI device support -# -# CONFIG_SCSI is not set - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# -# CONFIG_I2O is not set - -# -# Macintosh device drivers -# - -# -# Network device support -# -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_NET_VENDOR_3COM is not set - -# -# Tulip family network device support -# -# CONFIG_NET_TULIP is not set -# CONFIG_HP100 is not set -# CONFIG_NET_PCI is not set - -# -# Ethernet (1000 Mbit) -# -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -# CONFIG_E1000 is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SKGE is not set -# CONFIG_SK98LIN is not set -# CONFIG_TIGON3 is not set -# CONFIG_BNX2 is not set -CONFIG_GIANFAR=y -CONFIG_GFAR_NAPI=y - -# -# Ethernet (10000 Mbit) -# -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set - -# -# Token Ring devices -# -# CONFIG_TR is not set - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y - -# -# Userland interfaces -# -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -# CONFIG_VT is not set -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -# CONFIG_SERIAL_8250 is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_SERIAL_CPM=y -CONFIG_SERIAL_CPM_CONSOLE=y -CONFIG_SERIAL_CPM_SCC1=y -CONFIG_SERIAL_CPM_SCC2=y -# CONFIG_SERIAL_CPM_SCC3 is not set -# CONFIG_SERIAL_CPM_SCC4 is not set -# CONFIG_SERIAL_CPM_SMC1 is not set -# CONFIG_SERIAL_CPM_SMC2 is not set -# CONFIG_SERIAL_JSM is not set -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_NVRAM is not set -CONFIG_GEN_RTC=y -# CONFIG_GEN_RTC_X is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_AGP is not set -# CONFIG_DRM is not set -# CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# -# CONFIG_TCG_TPM is not set - -# -# I2C support -# -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y - -# -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# -# I2C Hardware Bus support -# -# CONFIG_I2C_ALI1535 is not set -# CONFIG_I2C_ALI1563 is not set -# CONFIG_I2C_ALI15X3 is not set -# CONFIG_I2C_AMD756 is not set -# CONFIG_I2C_AMD8111 is not set -# CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set -# CONFIG_I2C_PIIX4 is not set -CONFIG_I2C_MPC=y -# CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_SCx200_ACB is not set -# CONFIG_I2C_SIS5595 is not set -# CONFIG_I2C_SIS630 is not set -# CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_VIA is not set -# CONFIG_I2C_VIAPRO is not set -# CONFIG_I2C_VOODOO3 is not set -# CONFIG_I2C_PCA_ISA is not set -# CONFIG_I2C_SENSOR is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set -# CONFIG_SENSORS_EEPROM is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set -# CONFIG_SENSORS_M41T00 is not set -# CONFIG_SENSORS_MAX6875 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set - -# -# Dallas's 1-wire bus -# -# CONFIG_W1 is not set - -# -# Hardware Monitoring support -# -CONFIG_HWMON=y -# CONFIG_SENSORS_ADM1021 is not set -# CONFIG_SENSORS_ADM1025 is not set -# CONFIG_SENSORS_ADM1026 is not set -# CONFIG_SENSORS_ADM1031 is not set -# CONFIG_SENSORS_ADM9240 is not set -# CONFIG_SENSORS_ASB100 is not set -# CONFIG_SENSORS_ATXP1 is not set -# CONFIG_SENSORS_DS1621 is not set -# CONFIG_SENSORS_FSCHER is not set -# CONFIG_SENSORS_FSCPOS is not set -# CONFIG_SENSORS_GL518SM is not set -# CONFIG_SENSORS_GL520SM is not set -# CONFIG_SENSORS_IT87 is not set -# CONFIG_SENSORS_LM63 is not set -# CONFIG_SENSORS_LM75 is not set -# CONFIG_SENSORS_LM77 is not set -# CONFIG_SENSORS_LM78 is not set -# CONFIG_SENSORS_LM80 is not set -# CONFIG_SENSORS_LM83 is not set -# CONFIG_SENSORS_LM85 is not set -# CONFIG_SENSORS_LM87 is not set -# CONFIG_SENSORS_LM90 is not set -# CONFIG_SENSORS_LM92 is not set -# CONFIG_SENSORS_MAX1619 is not set -# CONFIG_SENSORS_PC87360 is not set -# CONFIG_SENSORS_SIS5595 is not set -# CONFIG_SENSORS_SMSC47M1 is not set -# CONFIG_SENSORS_SMSC47B397 is not set -# CONFIG_SENSORS_VIA686A is not set -# CONFIG_SENSORS_W83781D is not set -# CONFIG_SENSORS_W83L785TS is not set -# CONFIG_SENSORS_W83627HF is not set -# CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set - -# -# Misc devices -# - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -# CONFIG_FB is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -# CONFIG_USB is not set - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# InfiniBand support -# -# CONFIG_INFINIBAND is not set - -# -# SN Devices -# - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT2_FS_XIP is not set -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -# CONFIG_EXT3_FS_POSIX_ACL is not set -# CONFIG_EXT3_FS_SECURITY is not set -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FS_MBCACHE=y -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set - -# -# XFS support -# -# CONFIG_XFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -CONFIG_INOTIFY=y -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_SYSFS=y -# CONFIG_DEVPTS_FS_XATTR is not set -CONFIG_TMPFS=y -# CONFIG_TMPFS_XATTR is not set -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -# CONFIG_NFS_V3 is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -# CONFIG_MSDOS_PARTITION is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_EFI_PARTITION is not set - -# -# Native Language Support -# -# CONFIG_NLS is not set -# CONFIG_SCC_ENET is not set -# CONFIG_FEC_ENET is not set - -# -# CPM2 Options -# - -# -# Library routines -# -# CONFIG_CRC_CCITT is not set -CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set - -# -# Profiling support -# -# CONFIG_PROFILING is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -# CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_KGDB_CONSOLE is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -# CONFIG_CRYPTO is not set - -# -# Hardware crypto devices -# diff --git a/arch/ppc/configs/stx_gp3_defconfig b/arch/ppc/configs/stx_gp3_defconfig deleted file mode 100644 index 70d6f842aa9b..000000000000 --- a/arch/ppc/configs/stx_gp3_defconfig +++ /dev/null @@ -1,989 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc4 -# Tue May 24 18:11:04 2005 -# -CONFIG_MMU=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_HAVE_DEC_LOCK=y -CONFIG_PPC=y -CONFIG_PPC32=y -CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -# CONFIG_POSIX_MQUEUE is not set -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -# CONFIG_AUDIT is not set -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y -# CONFIG_IKCONFIG is not set -CONFIG_EMBEDDED=y -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_ALL is not set -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# -CONFIG_MODULES=y -# CONFIG_MODULE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y -CONFIG_MODVERSIONS=y -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y - -# -# Processor -# -# CONFIG_6xx is not set -# CONFIG_40x is not set -# CONFIG_44x is not set -# CONFIG_POWER3 is not set -# CONFIG_POWER4 is not set -# CONFIG_8xx is not set -CONFIG_E500=y -CONFIG_BOOKE=y -CONFIG_FSL_BOOKE=y -# CONFIG_PHYS_64BIT is not set -# CONFIG_SPE is not set -CONFIG_MATH_EMULATION=y -# CONFIG_CPU_FREQ is not set -# CONFIG_PM is not set -CONFIG_85xx=y -CONFIG_PPC_INDIRECT_PCI_BE=y - -# -# Freescale 85xx options -# -# CONFIG_MPC8540_ADS is not set -# CONFIG_MPC8555_CDS is not set -# CONFIG_MPC8560_ADS is not set -# CONFIG_SBC8560 is not set -CONFIG_STX_GP3=y -CONFIG_MPC8560=y - -# -# Platform options -# -CONFIG_CPM2=y -# CONFIG_PC_KEYBOARD is not set -# CONFIG_SMP is not set -# CONFIG_PREEMPT is not set -CONFIG_HIGHMEM=y -CONFIG_BINFMT_ELF=y -CONFIG_BINFMT_MISC=m -# CONFIG_CMDLINE_BOOL is not set -CONFIG_ISA_DMA_API=y - -# -# Bus options -# -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -# CONFIG_PCI_LEGACY_PROC is not set -# CONFIG_PCI_NAMES is not set -# CONFIG_PCI_DEBUG is not set - -# -# PCCARD (PCMCIA/CardBus) support -# -# CONFIG_PCCARD is not set -CONFIG_RAPIDIO=y -CONFIG_RAPIDIO_8_BIT_TRANSPORT=y -CONFIG_RAPIDIO_DISC_TIMEOUT=30 - -# -# Advanced setup -# -# CONFIG_ADVANCED_OPTIONS is not set - -# -# Default settings for advanced configuration options are used -# -CONFIG_HIGHMEM_START=0xfe000000 -CONFIG_LOWMEM_SIZE=0x30000000 -CONFIG_KERNEL_START=0xc0000000 -CONFIG_TASK_SIZE=0x80000000 -CONFIG_BOOT_LOAD=0x00800000 - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set -# CONFIG_DEBUG_DRIVER is not set - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -CONFIG_PARPORT=m -CONFIG_PARPORT_PC=m -# CONFIG_PARPORT_PC_FIFO is not set -# CONFIG_PARPORT_PC_SUPERIO is not set -# CONFIG_PARPORT_GSC is not set -# CONFIG_PARPORT_1284 is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_DEV_FD is not set -# CONFIG_PARIDE is not set -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=m -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -CONFIG_BLK_DEV_NBD=m -# CONFIG_BLK_DEV_SX8 is not set -CONFIG_BLK_DEV_RAM=m -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_INITRAMFS_SOURCE="" -# CONFIG_LBD is not set -# CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_ATA_OVER_ETH is not set - -# -# ATA/ATAPI/MFM/RLL support -# -CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y - -# -# Please see Documentation/ide.txt for help/info on IDE drives -# -# CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -CONFIG_BLK_DEV_IDECD=m -# CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set -# CONFIG_BLK_DEV_IDESCSI is not set -# CONFIG_IDE_TASK_IOCTL is not set - -# -# IDE chipset support/bugfixes -# -CONFIG_IDE_GENERIC=y -# CONFIG_BLK_DEV_IDEPCI is not set -# CONFIG_IDE_ARM is not set -# CONFIG_BLK_DEV_IDEDMA is not set -# CONFIG_IDEDMA_AUTO is not set -# CONFIG_BLK_DEV_HD is not set - -# -# SCSI device support -# -CONFIG_SCSI=m -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=m -CONFIG_CHR_DEV_ST=m -# CONFIG_CHR_DEV_OSST is not set -CONFIG_BLK_DEV_SR=m -# CONFIG_BLK_DEV_SR_VENDOR is not set -CONFIG_CHR_DEV_SG=m - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -CONFIG_SCSI_MULTI_LUN=y -CONFIG_SCSI_CONSTANTS=y -# CONFIG_SCSI_LOGGING is not set - -# -# SCSI Transport Attributes -# -# CONFIG_SCSI_SPI_ATTRS is not set -# CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set - -# -# SCSI low-level drivers -# -# CONFIG_BLK_DEV_3W_XXXX_RAID is not set -# CONFIG_SCSI_3W_9XXX is not set -# CONFIG_SCSI_ACARD is not set -# CONFIG_SCSI_AACRAID is not set -# CONFIG_SCSI_AIC7XXX is not set -# CONFIG_SCSI_AIC7XXX_OLD is not set -# CONFIG_SCSI_AIC79XX is not set -# CONFIG_SCSI_DPT_I2O is not set -# CONFIG_MEGARAID_NEWGEN is not set -# CONFIG_MEGARAID_LEGACY is not set -# CONFIG_SCSI_SATA is not set -# CONFIG_SCSI_BUSLOGIC is not set -# CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_EATA is not set -# CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GDTH is not set -# CONFIG_SCSI_IPS is not set -# CONFIG_SCSI_INITIO is not set -# CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_PPA is not set -# CONFIG_SCSI_IMM is not set -# CONFIG_SCSI_SYM53C8XX_2 is not set -# CONFIG_SCSI_IPR is not set -# CONFIG_SCSI_QLOGIC_FC is not set -# CONFIG_SCSI_QLOGIC_1280 is not set -CONFIG_SCSI_QLA2XXX=m -# CONFIG_SCSI_QLA21XX is not set -# CONFIG_SCSI_QLA22XX is not set -# CONFIG_SCSI_QLA2300 is not set -# CONFIG_SCSI_QLA2322 is not set -# CONFIG_SCSI_QLA6312 is not set -# CONFIG_SCSI_LPFC is not set -# CONFIG_SCSI_DC395x is not set -# CONFIG_SCSI_DC390T is not set -# CONFIG_SCSI_NSP32 is not set -# CONFIG_SCSI_DEBUG is not set - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# -# CONFIG_I2O is not set - -# -# Macintosh device drivers -# - -# -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_PNP=y -# CONFIG_IP_PNP_DHCP is not set -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_IP_TCPDIAG=y -# CONFIG_IP_TCPDIAG_IPV6 is not set - -# -# IP: Virtual Server Configuration -# -# CONFIG_IP_VS is not set -# CONFIG_IPV6 is not set -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set - -# -# IP: Netfilter Configuration -# -CONFIG_IP_NF_CONNTRACK=m -# CONFIG_IP_NF_CT_ACCT is not set -# CONFIG_IP_NF_CONNTRACK_MARK is not set -# CONFIG_IP_NF_CT_PROTO_SCTP is not set -CONFIG_IP_NF_FTP=m -CONFIG_IP_NF_IRC=m -# CONFIG_IP_NF_TFTP is not set -# CONFIG_IP_NF_AMANDA is not set -# CONFIG_IP_NF_QUEUE is not set -CONFIG_IP_NF_IPTABLES=m -# CONFIG_IP_NF_MATCH_LIMIT is not set -# CONFIG_IP_NF_MATCH_IPRANGE is not set -# CONFIG_IP_NF_MATCH_MAC is not set -# CONFIG_IP_NF_MATCH_PKTTYPE is not set -# CONFIG_IP_NF_MATCH_MARK is not set -# CONFIG_IP_NF_MATCH_MULTIPORT is not set -# CONFIG_IP_NF_MATCH_TOS is not set -# CONFIG_IP_NF_MATCH_RECENT is not set -# CONFIG_IP_NF_MATCH_ECN is not set -# CONFIG_IP_NF_MATCH_DSCP is not set -# CONFIG_IP_NF_MATCH_AH_ESP is not set -# CONFIG_IP_NF_MATCH_LENGTH is not set -# CONFIG_IP_NF_MATCH_TTL is not set -# CONFIG_IP_NF_MATCH_TCPMSS is not set -# CONFIG_IP_NF_MATCH_HELPER is not set -# CONFIG_IP_NF_MATCH_STATE is not set -# CONFIG_IP_NF_MATCH_CONNTRACK is not set -# CONFIG_IP_NF_MATCH_OWNER is not set -# CONFIG_IP_NF_MATCH_ADDRTYPE is not set -# CONFIG_IP_NF_MATCH_REALM is not set -# CONFIG_IP_NF_MATCH_SCTP is not set -# CONFIG_IP_NF_MATCH_COMMENT is not set -# CONFIG_IP_NF_MATCH_HASHLIMIT is not set -CONFIG_IP_NF_FILTER=m -# CONFIG_IP_NF_TARGET_REJECT is not set -# CONFIG_IP_NF_TARGET_LOG is not set -# CONFIG_IP_NF_TARGET_ULOG is not set -# CONFIG_IP_NF_TARGET_TCPMSS is not set -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m -# CONFIG_IP_NF_TARGET_NETMAP is not set -# CONFIG_IP_NF_TARGET_SAME is not set -CONFIG_IP_NF_NAT_SNMP_BASIC=m -CONFIG_IP_NF_NAT_IRC=m -CONFIG_IP_NF_NAT_FTP=m -# CONFIG_IP_NF_MANGLE is not set -# CONFIG_IP_NF_RAW is not set -# CONFIG_IP_NF_ARPTABLES is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing -# -CONFIG_NET_PKTGEN=y -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -# CONFIG_MII is not set -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_NET_VENDOR_3COM is not set - -# -# Tulip family network device support -# -# CONFIG_NET_TULIP is not set -# CONFIG_HP100 is not set -# CONFIG_NET_PCI is not set - -# -# Ethernet (1000 Mbit) -# -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -# CONFIG_E1000 is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SK98LIN is not set -# CONFIG_TIGON3 is not set -CONFIG_GIANFAR=y -CONFIG_GFAR_NAPI=y - -# -# Ethernet (10000 Mbit) -# -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set - -# -# Token Ring devices -# -# CONFIG_TR is not set - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set -CONFIG_RIONET=y -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -# CONFIG_PLIP is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_PSAUX=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1280 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1024 -CONFIG_INPUT_JOYDEV=m -# CONFIG_INPUT_TSDEV is not set -CONFIG_INPUT_EVDEV=m -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -CONFIG_INPUT_KEYBOARD=y -CONFIG_KEYBOARD_ATKBD=y -# CONFIG_KEYBOARD_SUNKBD is not set -# CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set -# CONFIG_KEYBOARD_NEWTON is not set -CONFIG_INPUT_MOUSE=y -CONFIG_MOUSE_PS2=y -# CONFIG_MOUSE_SERIAL is not set -# CONFIG_MOUSE_VSXXXAA is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -CONFIG_SERIO=y -CONFIG_SERIO_I8042=y -CONFIG_SERIO_SERPORT=y -# CONFIG_SERIO_PARKBD is not set -# CONFIG_SERIO_PCIPS2 is not set -CONFIG_SERIO_LIBPS2=y -# CONFIG_SERIO_RAW is not set -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y - -# -# Character devices -# -# CONFIG_VT is not set -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -# CONFIG_SERIAL_8250 is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_SERIAL_CPM=y -CONFIG_SERIAL_CPM_CONSOLE=y -# CONFIG_SERIAL_CPM_SCC1 is not set -CONFIG_SERIAL_CPM_SCC2=y -# CONFIG_SERIAL_CPM_SCC3 is not set -# CONFIG_SERIAL_CPM_SCC4 is not set -# CONFIG_SERIAL_CPM_SMC1 is not set -# CONFIG_SERIAL_CPM_SMC2 is not set -# CONFIG_SERIAL_JSM is not set -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 -CONFIG_PRINTER=m -# CONFIG_LP_CONSOLE is not set -# CONFIG_PPDEV is not set -# CONFIG_TIPAR is not set - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_NVRAM is not set -# CONFIG_GEN_RTC is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# -CONFIG_AGP=m -CONFIG_DRM=m -# CONFIG_DRM_TDFX is not set -# CONFIG_DRM_R128 is not set -# CONFIG_DRM_RADEON is not set -# CONFIG_DRM_MGA is not set -# CONFIG_DRM_SIS is not set -# CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# -# CONFIG_TCG_TPM is not set - -# -# I2C support -# -CONFIG_I2C=m -CONFIG_I2C_CHARDEV=m - -# -# I2C Algorithms -# -CONFIG_I2C_ALGOBIT=m -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# -# I2C Hardware Bus support -# -# CONFIG_I2C_ALI1535 is not set -# CONFIG_I2C_ALI1563 is not set -# CONFIG_I2C_ALI15X3 is not set -# CONFIG_I2C_AMD756 is not set -# CONFIG_I2C_AMD8111 is not set -# CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set -# CONFIG_I2C_PIIX4 is not set -# CONFIG_I2C_MPC is not set -# CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_PARPORT is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_SCx200_ACB is not set -# CONFIG_I2C_SIS5595 is not set -# CONFIG_I2C_SIS630 is not set -# CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_VIA is not set -# CONFIG_I2C_VIAPRO is not set -# CONFIG_I2C_VOODOO3 is not set -# CONFIG_I2C_PCA_ISA is not set - -# -# Hardware Sensors Chip support -# -# CONFIG_I2C_SENSOR is not set -# CONFIG_SENSORS_ADM1021 is not set -# CONFIG_SENSORS_ADM1025 is not set -# CONFIG_SENSORS_ADM1026 is not set -# CONFIG_SENSORS_ADM1031 is not set -# CONFIG_SENSORS_ASB100 is not set -# CONFIG_SENSORS_DS1621 is not set -# CONFIG_SENSORS_FSCHER is not set -# CONFIG_SENSORS_FSCPOS is not set -# CONFIG_SENSORS_GL518SM is not set -# CONFIG_SENSORS_GL520SM is not set -# CONFIG_SENSORS_IT87 is not set -# CONFIG_SENSORS_LM63 is not set -# CONFIG_SENSORS_LM75 is not set -# CONFIG_SENSORS_LM77 is not set -# CONFIG_SENSORS_LM78 is not set -# CONFIG_SENSORS_LM80 is not set -# CONFIG_SENSORS_LM83 is not set -# CONFIG_SENSORS_LM85 is not set -# CONFIG_SENSORS_LM87 is not set -# CONFIG_SENSORS_LM90 is not set -# CONFIG_SENSORS_LM92 is not set -# CONFIG_SENSORS_MAX1619 is not set -# CONFIG_SENSORS_PC87360 is not set -# CONFIG_SENSORS_SMSC47B397 is not set -# CONFIG_SENSORS_SIS5595 is not set -# CONFIG_SENSORS_SMSC47M1 is not set -# CONFIG_SENSORS_VIA686A is not set -# CONFIG_SENSORS_W83781D is not set -# CONFIG_SENSORS_W83L785TS is not set -# CONFIG_SENSORS_W83627HF is not set - -# -# Other I2C Chip support -# -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_EEPROM is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set -# CONFIG_SENSORS_M41T00 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set - -# -# Dallas's 1-wire bus -# -# CONFIG_W1 is not set - -# -# Misc devices -# - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -# CONFIG_FB is not set - -# -# Sound -# -CONFIG_SOUND=m - -# -# Advanced Linux Sound Architecture -# -# CONFIG_SND is not set - -# -# Open Sound System -# -# CONFIG_SOUND_PRIME is not set - -# -# USB support -# -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -# CONFIG_USB is not set - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# InfiniBand support -# -# CONFIG_INFINIBAND is not set - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -# CONFIG_EXT3_FS_POSIX_ACL is not set -# CONFIG_EXT3_FS_SECURITY is not set -CONFIG_JBD=y -CONFIG_JBD_DEBUG=y -CONFIG_FS_MBCACHE=y -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set - -# -# XFS support -# -# CONFIG_XFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -CONFIG_AUTOFS_FS=m -CONFIG_AUTOFS4_FS=y - -# -# CD-ROM/DVD Filesystems -# -CONFIG_ISO9660_FS=m -# CONFIG_JOLIET is not set -# CONFIG_ZISOFS is not set -CONFIG_UDF_FS=m -CONFIG_UDF_NLS=y - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=m -CONFIG_MSDOS_FS=m -CONFIG_VFAT_FS=m -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -# CONFIG_PROC_KCORE is not set -CONFIG_SYSFS=y -CONFIG_DEVFS_FS=y -# CONFIG_DEVFS_MOUNT is not set -# CONFIG_DEVFS_DEBUG is not set -# CONFIG_DEVPTS_FS_XATTR is not set -CONFIG_TMPFS=y -# CONFIG_TMPFS_XATTR is not set -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -CONFIG_CRAMFS=m -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_SUNRPC=y -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -CONFIG_SMB_FS=m -# CONFIG_SMB_NLS_DEFAULT is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -# CONFIG_PARTITION_ADVANCED is not set -CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="iso8859-1" -# CONFIG_NLS_CODEPAGE_437 is not set -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -# CONFIG_NLS_CODEPAGE_850 is not set -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_936 is not set -# CONFIG_NLS_CODEPAGE_950 is not set -# CONFIG_NLS_CODEPAGE_932 is not set -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_ISO8859_8 is not set -# CONFIG_NLS_CODEPAGE_1250 is not set -# CONFIG_NLS_CODEPAGE_1251 is not set -# CONFIG_NLS_ASCII is not set -# CONFIG_NLS_ISO8859_1 is not set -# CONFIG_NLS_ISO8859_2 is not set -# CONFIG_NLS_ISO8859_3 is not set -# CONFIG_NLS_ISO8859_4 is not set -# CONFIG_NLS_ISO8859_5 is not set -# CONFIG_NLS_ISO8859_6 is not set -# CONFIG_NLS_ISO8859_7 is not set -# CONFIG_NLS_ISO8859_9 is not set -# CONFIG_NLS_ISO8859_13 is not set -# CONFIG_NLS_ISO8859_14 is not set -# CONFIG_NLS_ISO8859_15 is not set -# CONFIG_NLS_KOI8_R is not set -# CONFIG_NLS_KOI8_U is not set -# CONFIG_NLS_UTF8 is not set -# CONFIG_SCC_ENET is not set -# CONFIG_FEC_ENET is not set - -# -# CPM2 Options -# - -# -# Library routines -# -CONFIG_CRC_CCITT=y -CONFIG_CRC32=y -# CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=m - -# -# Profiling support -# -# CONFIG_PROFILING is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -CONFIG_DEBUG_KERNEL=y -# CONFIG_MAGIC_SYSRQ is not set -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_SCHEDSTATS is not set -# CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -# CONFIG_DEBUG_KOBJECT is not set -# CONFIG_DEBUG_HIGHMEM is not set -# CONFIG_DEBUG_INFO is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_KGDB_CONSOLE is not set -# CONFIG_XMON is not set -CONFIG_BDI_SWITCH=y - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -# CONFIG_CRYPTO is not set - -# -# Hardware crypto devices -# diff --git a/arch/ppc/kernel/Makefile b/arch/ppc/kernel/Makefile index 6b4f022111e7..7b739054968f 100644 --- a/arch/ppc/kernel/Makefile +++ b/arch/ppc/kernel/Makefile @@ -4,7 +4,6 @@ extra-$(CONFIG_PPC_STD_MMU) := head.o extra-$(CONFIG_40x) := head_4xx.o extra-$(CONFIG_44x) := head_44x.o -extra-$(CONFIG_FSL_BOOKE) := head_fsl_booke.o extra-$(CONFIG_8xx) := head_8xx.o extra-y += vmlinux.lds @@ -13,7 +12,6 @@ obj-y := entry.o traps.o time.o misc.o \ ppc_htab.o obj-$(CONFIG_MODULES) += ppc_ksyms.o obj-$(CONFIG_PCI) += pci.o -obj-$(CONFIG_RAPIDIO) += rio.o obj-$(CONFIG_KGDB) += ppc-stub.o obj-$(CONFIG_SMP) += smp.o smp-tbsync.o obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o diff --git a/arch/ppc/kernel/asm-offsets.c b/arch/ppc/kernel/asm-offsets.c index e8e94321b59e..a51a17714231 100644 --- a/arch/ppc/kernel/asm-offsets.c +++ b/arch/ppc/kernel/asm-offsets.c @@ -54,12 +54,6 @@ main(void) DEFINE(THREAD_VSCR, offsetof(struct thread_struct, vscr)); DEFINE(THREAD_USED_VR, offsetof(struct thread_struct, used_vr)); #endif /* CONFIG_ALTIVEC */ -#ifdef CONFIG_SPE - DEFINE(THREAD_EVR0, offsetof(struct thread_struct, evr[0])); - DEFINE(THREAD_ACC, offsetof(struct thread_struct, acc)); - DEFINE(THREAD_SPEFSCR, offsetof(struct thread_struct, spefscr)); - DEFINE(THREAD_USED_SPE, offsetof(struct thread_struct, used_spe)); -#endif /* CONFIG_SPE */ /* Interrupt register frame */ DEFINE(STACK_FRAME_OVERHEAD, STACK_FRAME_OVERHEAD); DEFINE(INT_FRAME_SIZE, STACK_FRAME_OVERHEAD + sizeof(struct pt_regs)); diff --git a/arch/ppc/kernel/entry.S b/arch/ppc/kernel/entry.S index 59e77eb63338..5f3a5d068a5c 100644 --- a/arch/ppc/kernel/entry.S +++ b/arch/ppc/kernel/entry.S @@ -519,12 +519,7 @@ BEGIN_FTR_SECTION stw r12,THREAD+THREAD_VRSAVE(r2) END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) #endif /* CONFIG_ALTIVEC */ -#ifdef CONFIG_SPE - oris r0,r0,MSR_SPE@h /* Disable SPE */ - mfspr r12,SPRN_SPEFSCR /* save spefscr register value */ - stw r12,THREAD+THREAD_SPEFSCR(r2) -#endif /* CONFIG_SPE */ - and. r0,r0,r11 /* FP or altivec or SPE enabled? */ + and. r0,r0,r11 /* FP or altivec enabled? */ beq+ 1f andc r11,r11,r0 MTMSRD(r11) @@ -557,11 +552,6 @@ BEGIN_FTR_SECTION mtspr SPRN_VRSAVE,r0 /* if G4, restore VRSAVE reg */ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) #endif /* CONFIG_ALTIVEC */ -#ifdef CONFIG_SPE - lwz r0,THREAD+THREAD_SPEFSCR(r2) - mtspr SPRN_SPEFSCR,r0 /* restore SPEFSCR reg */ -#endif /* CONFIG_SPE */ - lwz r0,_CCR(r1) mtcrf 0xFF,r0 /* r3-r12 are destroyed -- Cort */ diff --git a/arch/ppc/kernel/head_44x.S b/arch/ppc/kernel/head_44x.S index 75bbc937ed73..ebb5a403829f 100644 --- a/arch/ppc/kernel/head_44x.S +++ b/arch/ppc/kernel/head_44x.S @@ -195,7 +195,7 @@ skpinv: addi r4,r4,1 /* Increment */ li r5,0 ori r5,r5,(PPC44x_TLB_SW | PPC44x_TLB_SR | PPC44x_TLB_I | PPC44x_TLB_G) - li r0,0 /* TLB slot 0 */ + li r0,62 /* TLB slot 62 */ tlbwe r3,r0,PPC44x_TLB_PAGEID /* Load the pageid fields */ tlbwe r4,r0,PPC44x_TLB_XLAT /* Load the translation fields */ diff --git a/arch/ppc/kernel/head_booke.h b/arch/ppc/kernel/head_booke.h index f3d274c6b231..166d597b6db2 100644 --- a/arch/ppc/kernel/head_booke.h +++ b/arch/ppc/kernel/head_booke.h @@ -212,60 +212,6 @@ label: * save (and later restore) the MSR via SPRN_CSRR1, which will still have * the MSR_DE bit set. */ -#ifdef CONFIG_E200 -#define DEBUG_EXCEPTION \ - START_EXCEPTION(Debug); \ - DEBUG_EXCEPTION_PROLOG; \ - \ - /* \ - * If there is a single step or branch-taken exception in an \ - * exception entry sequence, it was probably meant to apply to \ - * the code where the exception occurred (since exception entry \ - * doesn't turn off DE automatically). We simulate the effect \ - * of turning off DE on entry to an exception handler by turning \ - * off DE in the CSRR1 value and clearing the debug status. \ - */ \ - mfspr r10,SPRN_DBSR; /* check single-step/branch taken */ \ - andis. r10,r10,DBSR_IC@h; \ - beq+ 2f; \ - \ - lis r10,KERNELBASE@h; /* check if exception in vectors */ \ - ori r10,r10,KERNELBASE@l; \ - cmplw r12,r10; \ - blt+ 2f; /* addr below exception vectors */ \ - \ - lis r10,Debug@h; \ - ori r10,r10,Debug@l; \ - cmplw r12,r10; \ - bgt+ 2f; /* addr above exception vectors */ \ - \ - /* here it looks like we got an inappropriate debug exception. */ \ -1: rlwinm r9,r9,0,~MSR_DE; /* clear DE in the CDRR1 value */ \ - lis r10,DBSR_IC@h; /* clear the IC event */ \ - mtspr SPRN_DBSR,r10; \ - /* restore state and get out */ \ - lwz r10,_CCR(r11); \ - lwz r0,GPR0(r11); \ - lwz r1,GPR1(r11); \ - mtcrf 0x80,r10; \ - mtspr SPRN_DSRR0,r12; \ - mtspr SPRN_DSRR1,r9; \ - lwz r9,GPR9(r11); \ - lwz r12,GPR12(r11); \ - mtspr DEBUG_SPRG,r8; \ - BOOKE_LOAD_EXC_LEVEL_STACK(DEBUG); /* r8 points to the debug stack */ \ - lwz r10,GPR10-INT_FRAME_SIZE(r8); \ - lwz r11,GPR11-INT_FRAME_SIZE(r8); \ - mfspr r8,DEBUG_SPRG; \ - \ - RFDI; \ - b .; \ - \ - /* continue normal handling for a critical exception... */ \ -2: mfspr r4,SPRN_DBSR; \ - addi r3,r1,STACK_FRAME_OVERHEAD; \ - EXC_XFER_TEMPLATE(DebugException, 0x2002, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), NOCOPY, debug_transfer_to_handler, ret_from_debug_exc) -#else #define DEBUG_EXCEPTION \ START_EXCEPTION(Debug); \ CRITICAL_EXCEPTION_PROLOG; \ @@ -318,7 +264,6 @@ label: 2: mfspr r4,SPRN_DBSR; \ addi r3,r1,STACK_FRAME_OVERHEAD; \ EXC_XFER_TEMPLATE(DebugException, 0x2002, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), NOCOPY, crit_transfer_to_handler, ret_from_crit_exc) -#endif #define INSTRUCTION_STORAGE_EXCEPTION \ START_EXCEPTION(InstructionStorage) \ diff --git a/arch/ppc/kernel/head_fsl_booke.S b/arch/ppc/kernel/head_fsl_booke.S deleted file mode 100644 index 1f155d399d57..000000000000 --- a/arch/ppc/kernel/head_fsl_booke.S +++ /dev/null @@ -1,1065 +0,0 @@ -/* - * Kernel execution entry point code. - * - * Copyright (c) 1995-1996 Gary Thomas <gdt@linuxppc.org> - * Initial PowerPC version. - * Copyright (c) 1996 Cort Dougan <cort@cs.nmt.edu> - * Rewritten for PReP - * Copyright (c) 1996 Paul Mackerras <paulus@cs.anu.edu.au> - * Low-level exception handers, MMU support, and rewrite. - * Copyright (c) 1997 Dan Malek <dmalek@jlc.net> - * PowerPC 8xx modifications. - * Copyright (c) 1998-1999 TiVo, Inc. - * PowerPC 403GCX modifications. - * Copyright (c) 1999 Grant Erickson <grant@lcse.umn.edu> - * PowerPC 403GCX/405GP modifications. - * Copyright 2000 MontaVista Software Inc. - * PPC405 modifications - * PowerPC 403GCX/405GP modifications. - * Author: MontaVista Software, Inc. - * frank_rowand@mvista.com or source@mvista.com - * debbie_chu@mvista.com - * Copyright 2002-2004 MontaVista Software, Inc. - * PowerPC 44x support, Matt Porter <mporter@kernel.crashing.org> - * Copyright 2004 Freescale Semiconductor, Inc - * PowerPC e500 modifications, Kumar Gala <galak@kernel.crashing.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include <linux/threads.h> -#include <asm/processor.h> -#include <asm/page.h> -#include <asm/mmu.h> -#include <asm/pgtable.h> -#include <asm/cputable.h> -#include <asm/thread_info.h> -#include <asm/ppc_asm.h> -#include <asm/asm-offsets.h> -#include "head_booke.h" - -/* As with the other PowerPC ports, it is expected that when code - * execution begins here, the following registers contain valid, yet - * optional, information: - * - * r3 - Board info structure pointer (DRAM, frequency, MAC address, etc.) - * r4 - Starting address of the init RAM disk - * r5 - Ending address of the init RAM disk - * r6 - Start of kernel command line string (e.g. "mem=128") - * r7 - End of kernel command line string - * - */ - .text -_GLOBAL(_stext) -_GLOBAL(_start) - /* - * Reserve a word at a fixed location to store the address - * of abatron_pteptrs - */ - nop -/* - * Save parameters we are passed - */ - mr r31,r3 - mr r30,r4 - mr r29,r5 - mr r28,r6 - mr r27,r7 - li r24,0 /* CPU number */ - -/* We try to not make any assumptions about how the boot loader - * setup or used the TLBs. We invalidate all mappings from the - * boot loader and load a single entry in TLB1[0] to map the - * first 16M of kernel memory. Any boot info passed from the - * bootloader needs to live in this first 16M. - * - * Requirement on bootloader: - * - The page we're executing in needs to reside in TLB1 and - * have IPROT=1. If not an invalidate broadcast could - * evict the entry we're currently executing in. - * - * r3 = Index of TLB1 were executing in - * r4 = Current MSR[IS] - * r5 = Index of TLB1 temp mapping - * - * Later in mapin_ram we will correctly map lowmem, and resize TLB1[0] - * if needed - */ - -/* 1. Find the index of the entry we're executing in */ - bl invstr /* Find our address */ -invstr: mflr r6 /* Make it accessible */ - mfmsr r7 - rlwinm r4,r7,27,31,31 /* extract MSR[IS] */ - mfspr r7, SPRN_PID0 - slwi r7,r7,16 - or r7,r7,r4 - mtspr SPRN_MAS6,r7 - tlbsx 0,r6 /* search MSR[IS], SPID=PID0 */ -#ifndef CONFIG_E200 - mfspr r7,SPRN_MAS1 - andis. r7,r7,MAS1_VALID@h - bne match_TLB - mfspr r7,SPRN_PID1 - slwi r7,r7,16 - or r7,r7,r4 - mtspr SPRN_MAS6,r7 - tlbsx 0,r6 /* search MSR[IS], SPID=PID1 */ - mfspr r7,SPRN_MAS1 - andis. r7,r7,MAS1_VALID@h - bne match_TLB - mfspr r7, SPRN_PID2 - slwi r7,r7,16 - or r7,r7,r4 - mtspr SPRN_MAS6,r7 - tlbsx 0,r6 /* Fall through, we had to match */ -#endif -match_TLB: - mfspr r7,SPRN_MAS0 - rlwinm r3,r7,16,20,31 /* Extract MAS0(Entry) */ - - mfspr r7,SPRN_MAS1 /* Insure IPROT set */ - oris r7,r7,MAS1_IPROT@h - mtspr SPRN_MAS1,r7 - tlbwe - -/* 2. Invalidate all entries except the entry we're executing in */ - mfspr r9,SPRN_TLB1CFG - andi. r9,r9,0xfff - li r6,0 /* Set Entry counter to 0 */ -1: lis r7,0x1000 /* Set MAS0(TLBSEL) = 1 */ - rlwimi r7,r6,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r6) */ - mtspr SPRN_MAS0,r7 - tlbre - mfspr r7,SPRN_MAS1 - rlwinm r7,r7,0,2,31 /* Clear MAS1 Valid and IPROT */ - cmpw r3,r6 - beq skpinv /* Dont update the current execution TLB */ - mtspr SPRN_MAS1,r7 - tlbwe - isync -skpinv: addi r6,r6,1 /* Increment */ - cmpw r6,r9 /* Are we done? */ - bne 1b /* If not, repeat */ - - /* Invalidate TLB0 */ - li r6,0x04 - tlbivax 0,r6 -#ifdef CONFIG_SMP - tlbsync -#endif - /* Invalidate TLB1 */ - li r6,0x0c - tlbivax 0,r6 -#ifdef CONFIG_SMP - tlbsync -#endif - msync - -/* 3. Setup a temp mapping and jump to it */ - andi. r5, r3, 0x1 /* Find an entry not used and is non-zero */ - addi r5, r5, 0x1 - lis r7,0x1000 /* Set MAS0(TLBSEL) = 1 */ - rlwimi r7,r3,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r3) */ - mtspr SPRN_MAS0,r7 - tlbre - - /* Just modify the entry ID and EPN for the temp mapping */ - lis r7,0x1000 /* Set MAS0(TLBSEL) = 1 */ - rlwimi r7,r5,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r5) */ - mtspr SPRN_MAS0,r7 - xori r6,r4,1 /* Setup TMP mapping in the other Address space */ - slwi r6,r6,12 - oris r6,r6,(MAS1_VALID|MAS1_IPROT)@h - ori r6,r6,(MAS1_TSIZE(BOOKE_PAGESZ_4K))@l - mtspr SPRN_MAS1,r6 - mfspr r6,SPRN_MAS2 - li r7,0 /* temp EPN = 0 */ - rlwimi r7,r6,0,20,31 - mtspr SPRN_MAS2,r7 - tlbwe - - xori r6,r4,1 - slwi r6,r6,5 /* setup new context with other address space */ - bl 1f /* Find our address */ -1: mflr r9 - rlwimi r7,r9,0,20,31 - addi r7,r7,24 - mtspr SPRN_SRR0,r7 - mtspr SPRN_SRR1,r6 - rfi - -/* 4. Clear out PIDs & Search info */ - li r6,0 - mtspr SPRN_PID0,r6 -#ifndef CONFIG_E200 - mtspr SPRN_PID1,r6 - mtspr SPRN_PID2,r6 -#endif - mtspr SPRN_MAS6,r6 - -/* 5. Invalidate mapping we started in */ - lis r7,0x1000 /* Set MAS0(TLBSEL) = 1 */ - rlwimi r7,r3,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r3) */ - mtspr SPRN_MAS0,r7 - tlbre - mfspr r6,SPRN_MAS1 - rlwinm r6,r6,0,2,0 /* clear IPROT */ - mtspr SPRN_MAS1,r6 - tlbwe - /* Invalidate TLB1 */ - li r9,0x0c - tlbivax 0,r9 -#ifdef CONFIG_SMP - tlbsync -#endif - msync - -/* 6. Setup KERNELBASE mapping in TLB1[0] */ - lis r6,0x1000 /* Set MAS0(TLBSEL) = TLB1(1), ESEL = 0 */ - mtspr SPRN_MAS0,r6 - lis r6,(MAS1_VALID|MAS1_IPROT)@h - ori r6,r6,(MAS1_TSIZE(BOOKE_PAGESZ_16M))@l - mtspr SPRN_MAS1,r6 - li r7,0 - lis r6,KERNELBASE@h - ori r6,r6,KERNELBASE@l - rlwimi r6,r7,0,20,31 - mtspr SPRN_MAS2,r6 - li r7,(MAS3_SX|MAS3_SW|MAS3_SR) - mtspr SPRN_MAS3,r7 - tlbwe - -/* 7. Jump to KERNELBASE mapping */ - lis r7,MSR_KERNEL@h - ori r7,r7,MSR_KERNEL@l - bl 1f /* Find our address */ -1: mflr r9 - rlwimi r6,r9,0,20,31 - addi r6,r6,24 - mtspr SPRN_SRR0,r6 - mtspr SPRN_SRR1,r7 - rfi /* start execution out of TLB1[0] entry */ - -/* 8. Clear out the temp mapping */ - lis r7,0x1000 /* Set MAS0(TLBSEL) = 1 */ - rlwimi r7,r5,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r5) */ - mtspr SPRN_MAS0,r7 - tlbre - mfspr r8,SPRN_MAS1 - rlwinm r8,r8,0,2,0 /* clear IPROT */ - mtspr SPRN_MAS1,r8 - tlbwe - /* Invalidate TLB1 */ - li r9,0x0c - tlbivax 0,r9 -#ifdef CONFIG_SMP - tlbsync -#endif - msync - - /* Establish the interrupt vector offsets */ - SET_IVOR(0, CriticalInput); - SET_IVOR(1, MachineCheck); - SET_IVOR(2, DataStorage); - SET_IVOR(3, InstructionStorage); - SET_IVOR(4, ExternalInput); - SET_IVOR(5, Alignment); - SET_IVOR(6, Program); - SET_IVOR(7, FloatingPointUnavailable); - SET_IVOR(8, SystemCall); - SET_IVOR(9, AuxillaryProcessorUnavailable); - SET_IVOR(10, Decrementer); - SET_IVOR(11, FixedIntervalTimer); - SET_IVOR(12, WatchdogTimer); - SET_IVOR(13, DataTLBError); - SET_IVOR(14, InstructionTLBError); - SET_IVOR(15, Debug); - SET_IVOR(32, SPEUnavailable); - SET_IVOR(33, SPEFloatingPointData); - SET_IVOR(34, SPEFloatingPointRound); -#ifndef CONFIG_E200 - SET_IVOR(35, PerformanceMonitor); -#endif - - /* Establish the interrupt vector base */ - lis r4,interrupt_base@h /* IVPR only uses the high 16-bits */ - mtspr SPRN_IVPR,r4 - - /* Setup the defaults for TLB entries */ - li r2,(MAS4_TSIZED(BOOKE_PAGESZ_4K))@l -#ifdef CONFIG_E200 - oris r2,r2,MAS4_TLBSELD(1)@h -#endif - mtspr SPRN_MAS4, r2 - -#if 0 - /* Enable DOZE */ - mfspr r2,SPRN_HID0 - oris r2,r2,HID0_DOZE@h - mtspr SPRN_HID0, r2 -#endif -#ifdef CONFIG_E200 - /* enable dedicated debug exception handling resources (Debug APU) */ - mfspr r2,SPRN_HID0 - ori r2,r2,HID0_DAPUEN@l - mtspr SPRN_HID0,r2 -#endif - -#if !defined(CONFIG_BDI_SWITCH) - /* - * The Abatron BDI JTAG debugger does not tolerate others - * mucking with the debug registers. - */ - lis r2,DBCR0_IDM@h - mtspr SPRN_DBCR0,r2 - isync - /* clear any residual debug events */ - li r2,-1 - mtspr SPRN_DBSR,r2 -#endif - - /* - * This is where the main kernel code starts. - */ - - /* ptr to current */ - lis r2,init_task@h - ori r2,r2,init_task@l - - /* ptr to current thread */ - addi r4,r2,THREAD /* init task's THREAD */ - mtspr SPRN_SPRG3,r4 - - /* stack */ - lis r1,init_thread_union@h - ori r1,r1,init_thread_union@l - li r0,0 - stwu r0,THREAD_SIZE-STACK_FRAME_OVERHEAD(r1) - - bl early_init - - mfspr r3,SPRN_TLB1CFG - andi. r3,r3,0xfff - lis r4,num_tlbcam_entries@ha - stw r3,num_tlbcam_entries@l(r4) -/* - * Decide what sort of machine this is and initialize the MMU. - */ - mr r3,r31 - mr r4,r30 - mr r5,r29 - mr r6,r28 - mr r7,r27 - bl machine_init - bl MMU_init - - /* Setup PTE pointers for the Abatron bdiGDB */ - lis r6, swapper_pg_dir@h - ori r6, r6, swapper_pg_dir@l - lis r5, abatron_pteptrs@h - ori r5, r5, abatron_pteptrs@l - lis r4, KERNELBASE@h - ori r4, r4, KERNELBASE@l - stw r5, 0(r4) /* Save abatron_pteptrs at a fixed location */ - stw r6, 0(r5) - - /* Let's move on */ - lis r4,start_kernel@h - ori r4,r4,start_kernel@l - lis r3,MSR_KERNEL@h - ori r3,r3,MSR_KERNEL@l - mtspr SPRN_SRR0,r4 - mtspr SPRN_SRR1,r3 - rfi /* change context and jump to start_kernel */ - -/* Macros to hide the PTE size differences - * - * FIND_PTE -- walks the page tables given EA & pgdir pointer - * r10 -- EA of fault - * r11 -- PGDIR pointer - * r12 -- free - * label 2: is the bailout case - * - * if we find the pte (fall through): - * r11 is low pte word - * r12 is pointer to the pte - */ -#ifdef CONFIG_PTE_64BIT -#define PTE_FLAGS_OFFSET 4 -#define FIND_PTE \ - rlwinm r12, r10, 13, 19, 29; /* Compute pgdir/pmd offset */ \ - lwzx r11, r12, r11; /* Get pgd/pmd entry */ \ - rlwinm. r12, r11, 0, 0, 20; /* Extract pt base address */ \ - beq 2f; /* Bail if no table */ \ - rlwimi r12, r10, 23, 20, 28; /* Compute pte address */ \ - lwz r11, 4(r12); /* Get pte entry */ -#else -#define PTE_FLAGS_OFFSET 0 -#define FIND_PTE \ - rlwimi r11, r10, 12, 20, 29; /* Create L1 (pgdir/pmd) address */ \ - lwz r11, 0(r11); /* Get L1 entry */ \ - rlwinm. r12, r11, 0, 0, 19; /* Extract L2 (pte) base address */ \ - beq 2f; /* Bail if no table */ \ - rlwimi r12, r10, 22, 20, 29; /* Compute PTE address */ \ - lwz r11, 0(r12); /* Get Linux PTE */ -#endif - -/* - * Interrupt vector entry code - * - * The Book E MMUs are always on so we don't need to handle - * interrupts in real mode as with previous PPC processors. In - * this case we handle interrupts in the kernel virtual address - * space. - * - * Interrupt vectors are dynamically placed relative to the - * interrupt prefix as determined by the address of interrupt_base. - * The interrupt vectors offsets are programmed using the labels - * for each interrupt vector entry. - * - * Interrupt vectors must be aligned on a 16 byte boundary. - * We align on a 32 byte cache line boundary for good measure. - */ - -interrupt_base: - /* Critical Input Interrupt */ - CRITICAL_EXCEPTION(0x0100, CriticalInput, unknown_exception) - - /* Machine Check Interrupt */ -#ifdef CONFIG_E200 - /* no RFMCI, MCSRRs on E200 */ - CRITICAL_EXCEPTION(0x0200, MachineCheck, machine_check_exception) -#else - MCHECK_EXCEPTION(0x0200, MachineCheck, machine_check_exception) -#endif - - /* Data Storage Interrupt */ - START_EXCEPTION(DataStorage) - mtspr SPRN_SPRG0, r10 /* Save some working registers */ - mtspr SPRN_SPRG1, r11 - mtspr SPRN_SPRG4W, r12 - mtspr SPRN_SPRG5W, r13 - mfcr r11 - mtspr SPRN_SPRG7W, r11 - - /* - * Check if it was a store fault, if not then bail - * because a user tried to access a kernel or - * read-protected page. Otherwise, get the - * offending address and handle it. - */ - mfspr r10, SPRN_ESR - andis. r10, r10, ESR_ST@h - beq 2f - - mfspr r10, SPRN_DEAR /* Get faulting address */ - - /* If we are faulting a kernel address, we have to use the - * kernel page tables. - */ - lis r11, TASK_SIZE@h - ori r11, r11, TASK_SIZE@l - cmplw 0, r10, r11 - bge 2f - - /* Get the PGD for the current thread */ -3: - mfspr r11,SPRN_SPRG3 - lwz r11,PGDIR(r11) -4: - FIND_PTE - - /* Are _PAGE_USER & _PAGE_RW set & _PAGE_HWWRITE not? */ - andi. r13, r11, _PAGE_RW|_PAGE_USER|_PAGE_HWWRITE - cmpwi 0, r13, _PAGE_RW|_PAGE_USER - bne 2f /* Bail if not */ - - /* Update 'changed'. */ - ori r11, r11, _PAGE_DIRTY|_PAGE_ACCESSED|_PAGE_HWWRITE - stw r11, PTE_FLAGS_OFFSET(r12) /* Update Linux page table */ - - /* MAS2 not updated as the entry does exist in the tlb, this - fault taken to detect state transition (eg: COW -> DIRTY) - */ - andi. r11, r11, _PAGE_HWEXEC - rlwimi r11, r11, 31, 27, 27 /* SX <- _PAGE_HWEXEC */ - ori r11, r11, (MAS3_UW|MAS3_SW|MAS3_UR|MAS3_SR)@l /* set static perms */ - - /* update search PID in MAS6, AS = 0 */ - mfspr r12, SPRN_PID0 - slwi r12, r12, 16 - mtspr SPRN_MAS6, r12 - - /* find the TLB index that caused the fault. It has to be here. */ - tlbsx 0, r10 - - /* only update the perm bits, assume the RPN is fine */ - mfspr r12, SPRN_MAS3 - rlwimi r12, r11, 0, 20, 31 - mtspr SPRN_MAS3,r12 - tlbwe - - /* Done...restore registers and get out of here. */ - mfspr r11, SPRN_SPRG7R - mtcr r11 - mfspr r13, SPRN_SPRG5R - mfspr r12, SPRN_SPRG4R - mfspr r11, SPRN_SPRG1 - mfspr r10, SPRN_SPRG0 - rfi /* Force context change */ - -2: - /* - * The bailout. Restore registers to pre-exception conditions - * and call the heavyweights to help us out. - */ - mfspr r11, SPRN_SPRG7R - mtcr r11 - mfspr r13, SPRN_SPRG5R - mfspr r12, SPRN_SPRG4R - mfspr r11, SPRN_SPRG1 - mfspr r10, SPRN_SPRG0 - b data_access - - /* Instruction Storage Interrupt */ - INSTRUCTION_STORAGE_EXCEPTION - - /* External Input Interrupt */ - EXCEPTION(0x0500, ExternalInput, do_IRQ, EXC_XFER_LITE) - - /* Alignment Interrupt */ - ALIGNMENT_EXCEPTION - - /* Program Interrupt */ - PROGRAM_EXCEPTION - - /* Floating Point Unavailable Interrupt */ -#ifdef CONFIG_PPC_FPU - FP_UNAVAILABLE_EXCEPTION -#else -#ifdef CONFIG_E200 - /* E200 treats 'normal' floating point instructions as FP Unavail exception */ - EXCEPTION(0x0800, FloatingPointUnavailable, program_check_exception, EXC_XFER_EE) -#else - EXCEPTION(0x0800, FloatingPointUnavailable, unknown_exception, EXC_XFER_EE) -#endif -#endif - - /* System Call Interrupt */ - START_EXCEPTION(SystemCall) - NORMAL_EXCEPTION_PROLOG - EXC_XFER_EE_LITE(0x0c00, DoSyscall) - - /* Auxillary Processor Unavailable Interrupt */ - EXCEPTION(0x2900, AuxillaryProcessorUnavailable, unknown_exception, EXC_XFER_EE) - - /* Decrementer Interrupt */ - DECREMENTER_EXCEPTION - - /* Fixed Internal Timer Interrupt */ - /* TODO: Add FIT support */ - EXCEPTION(0x3100, FixedIntervalTimer, unknown_exception, EXC_XFER_EE) - - /* Watchdog Timer Interrupt */ -#ifdef CONFIG_BOOKE_WDT - CRITICAL_EXCEPTION(0x3200, WatchdogTimer, WatchdogException) -#else - CRITICAL_EXCEPTION(0x3200, WatchdogTimer, unknown_exception) -#endif - - /* Data TLB Error Interrupt */ - START_EXCEPTION(DataTLBError) - mtspr SPRN_SPRG0, r10 /* Save some working registers */ - mtspr SPRN_SPRG1, r11 - mtspr SPRN_SPRG4W, r12 - mtspr SPRN_SPRG5W, r13 - mfcr r11 - mtspr SPRN_SPRG7W, r11 - mfspr r10, SPRN_DEAR /* Get faulting address */ - - /* If we are faulting a kernel address, we have to use the - * kernel page tables. - */ - lis r11, TASK_SIZE@h - ori r11, r11, TASK_SIZE@l - cmplw 5, r10, r11 - blt 5, 3f - lis r11, swapper_pg_dir@h - ori r11, r11, swapper_pg_dir@l - - mfspr r12,SPRN_MAS1 /* Set TID to 0 */ - rlwinm r12,r12,0,16,1 - mtspr SPRN_MAS1,r12 - - b 4f - - /* Get the PGD for the current thread */ -3: - mfspr r11,SPRN_SPRG3 - lwz r11,PGDIR(r11) - -4: - FIND_PTE - andi. r13, r11, _PAGE_PRESENT /* Is the page present? */ - beq 2f /* Bail if not present */ - -#ifdef CONFIG_PTE_64BIT - lwz r13, 0(r12) -#endif - ori r11, r11, _PAGE_ACCESSED - stw r11, PTE_FLAGS_OFFSET(r12) - - /* Jump to common tlb load */ - b finish_tlb_load -2: - /* The bailout. Restore registers to pre-exception conditions - * and call the heavyweights to help us out. - */ - mfspr r11, SPRN_SPRG7R - mtcr r11 - mfspr r13, SPRN_SPRG5R - mfspr r12, SPRN_SPRG4R - mfspr r11, SPRN_SPRG1 - mfspr r10, SPRN_SPRG0 - b data_access - - /* Instruction TLB Error Interrupt */ - /* - * Nearly the same as above, except we get our - * information from different registers and bailout - * to a different point. - */ - START_EXCEPTION(InstructionTLBError) - mtspr SPRN_SPRG0, r10 /* Save some working registers */ - mtspr SPRN_SPRG1, r11 - mtspr SPRN_SPRG4W, r12 - mtspr SPRN_SPRG5W, r13 - mfcr r11 - mtspr SPRN_SPRG7W, r11 - mfspr r10, SPRN_SRR0 /* Get faulting address */ - - /* If we are faulting a kernel address, we have to use the - * kernel page tables. - */ - lis r11, TASK_SIZE@h - ori r11, r11, TASK_SIZE@l - cmplw 5, r10, r11 - blt 5, 3f - lis r11, swapper_pg_dir@h - ori r11, r11, swapper_pg_dir@l - - mfspr r12,SPRN_MAS1 /* Set TID to 0 */ - rlwinm r12,r12,0,16,1 - mtspr SPRN_MAS1,r12 - - b 4f - - /* Get the PGD for the current thread */ -3: - mfspr r11,SPRN_SPRG3 - lwz r11,PGDIR(r11) - -4: - FIND_PTE - andi. r13, r11, _PAGE_PRESENT /* Is the page present? */ - beq 2f /* Bail if not present */ - -#ifdef CONFIG_PTE_64BIT - lwz r13, 0(r12) -#endif - ori r11, r11, _PAGE_ACCESSED - stw r11, PTE_FLAGS_OFFSET(r12) - - /* Jump to common TLB load point */ - b finish_tlb_load - -2: - /* The bailout. Restore registers to pre-exception conditions - * and call the heavyweights to help us out. - */ - mfspr r11, SPRN_SPRG7R - mtcr r11 - mfspr r13, SPRN_SPRG5R - mfspr r12, SPRN_SPRG4R - mfspr r11, SPRN_SPRG1 - mfspr r10, SPRN_SPRG0 - b InstructionStorage - -#ifdef CONFIG_SPE - /* SPE Unavailable */ - START_EXCEPTION(SPEUnavailable) - NORMAL_EXCEPTION_PROLOG - bne load_up_spe - addi r3,r1,STACK_FRAME_OVERHEAD - EXC_XFER_EE_LITE(0x2010, KernelSPE) -#else - EXCEPTION(0x2020, SPEUnavailable, unknown_exception, EXC_XFER_EE) -#endif /* CONFIG_SPE */ - - /* SPE Floating Point Data */ -#ifdef CONFIG_SPE - EXCEPTION(0x2030, SPEFloatingPointData, SPEFloatingPointException, EXC_XFER_EE); -#else - EXCEPTION(0x2040, SPEFloatingPointData, unknown_exception, EXC_XFER_EE) -#endif /* CONFIG_SPE */ - - /* SPE Floating Point Round */ - EXCEPTION(0x2050, SPEFloatingPointRound, unknown_exception, EXC_XFER_EE) - - /* Performance Monitor */ - EXCEPTION(0x2060, PerformanceMonitor, performance_monitor_exception, EXC_XFER_STD) - - - /* Debug Interrupt */ - DEBUG_EXCEPTION - -/* - * Local functions - */ - - /* - * Data TLB exceptions will bail out to this point - * if they can't resolve the lightweight TLB fault. - */ -data_access: - NORMAL_EXCEPTION_PROLOG - mfspr r5,SPRN_ESR /* Grab the ESR, save it, pass arg3 */ - stw r5,_ESR(r11) - mfspr r4,SPRN_DEAR /* Grab the DEAR, save it, pass arg2 */ - andis. r10,r5,(ESR_ILK|ESR_DLK)@h - bne 1f - EXC_XFER_EE_LITE(0x0300, handle_page_fault) -1: - addi r3,r1,STACK_FRAME_OVERHEAD - EXC_XFER_EE_LITE(0x0300, CacheLockingException) - -/* - - * Both the instruction and data TLB miss get to this - * point to load the TLB. - * r10 - EA of fault - * r11 - TLB (info from Linux PTE) - * r12, r13 - available to use - * CR5 - results of addr < TASK_SIZE - * MAS0, MAS1 - loaded with proper value when we get here - * MAS2, MAS3 - will need additional info from Linux PTE - * Upon exit, we reload everything and RFI. - */ -finish_tlb_load: - /* - * We set execute, because we don't have the granularity to - * properly set this at the page level (Linux problem). - * Many of these bits are software only. Bits we don't set - * here we (properly should) assume have the appropriate value. - */ - - mfspr r12, SPRN_MAS2 -#ifdef CONFIG_PTE_64BIT - rlwimi r12, r11, 26, 24, 31 /* extract ...WIMGE from pte */ -#else - rlwimi r12, r11, 26, 27, 31 /* extract WIMGE from pte */ -#endif - mtspr SPRN_MAS2, r12 - - bge 5, 1f - - /* is user addr */ - andi. r12, r11, (_PAGE_USER | _PAGE_HWWRITE | _PAGE_HWEXEC) - andi. r10, r11, _PAGE_USER /* Test for _PAGE_USER */ - srwi r10, r12, 1 - or r12, r12, r10 /* Copy user perms into supervisor */ - iseleq r12, 0, r12 - b 2f - - /* is kernel addr */ -1: rlwinm r12, r11, 31, 29, 29 /* Extract _PAGE_HWWRITE into SW */ - ori r12, r12, (MAS3_SX | MAS3_SR) - -#ifdef CONFIG_PTE_64BIT -2: rlwimi r12, r13, 24, 0, 7 /* grab RPN[32:39] */ - rlwimi r12, r11, 24, 8, 19 /* grab RPN[40:51] */ - mtspr SPRN_MAS3, r12 -BEGIN_FTR_SECTION - srwi r10, r13, 8 /* grab RPN[8:31] */ - mtspr SPRN_MAS7, r10 -END_FTR_SECTION_IFSET(CPU_FTR_BIG_PHYS) -#else -2: rlwimi r11, r12, 0, 20, 31 /* Extract RPN from PTE and merge with perms */ - mtspr SPRN_MAS3, r11 -#endif -#ifdef CONFIG_E200 - /* Round robin TLB1 entries assignment */ - mfspr r12, SPRN_MAS0 - - /* Extract TLB1CFG(NENTRY) */ - mfspr r11, SPRN_TLB1CFG - andi. r11, r11, 0xfff - - /* Extract MAS0(NV) */ - andi. r13, r12, 0xfff - addi r13, r13, 1 - cmpw 0, r13, r11 - addi r12, r12, 1 - - /* check if we need to wrap */ - blt 7f - - /* wrap back to first free tlbcam entry */ - lis r13, tlbcam_index@ha - lwz r13, tlbcam_index@l(r13) - rlwimi r12, r13, 0, 20, 31 -7: - mtspr SPRN_MAS0,r12 -#endif /* CONFIG_E200 */ - - tlbwe - - /* Done...restore registers and get out of here. */ - mfspr r11, SPRN_SPRG7R - mtcr r11 - mfspr r13, SPRN_SPRG5R - mfspr r12, SPRN_SPRG4R - mfspr r11, SPRN_SPRG1 - mfspr r10, SPRN_SPRG0 - rfi /* Force context change */ - -#ifdef CONFIG_SPE -/* Note that the SPE support is closely modeled after the AltiVec - * support. Changes to one are likely to be applicable to the - * other! */ -load_up_spe: -/* - * Disable SPE for the task which had SPE previously, - * and save its SPE registers in its thread_struct. - * Enables SPE for use in the kernel on return. - * On SMP we know the SPE units are free, since we give it up every - * switch. -- Kumar - */ - mfmsr r5 - oris r5,r5,MSR_SPE@h - mtmsr r5 /* enable use of SPE now */ - isync -/* - * For SMP, we don't do lazy SPE switching because it just gets too - * horrendously complex, especially when a task switches from one CPU - * to another. Instead we call giveup_spe in switch_to. - */ -#ifndef CONFIG_SMP - lis r3,last_task_used_spe@ha - lwz r4,last_task_used_spe@l(r3) - cmpi 0,r4,0 - beq 1f - addi r4,r4,THREAD /* want THREAD of last_task_used_spe */ - SAVE_32EVRS(0,r10,r4) - evxor evr10, evr10, evr10 /* clear out evr10 */ - evmwumiaa evr10, evr10, evr10 /* evr10 <- ACC = 0 * 0 + ACC */ - li r5,THREAD_ACC - evstddx evr10, r4, r5 /* save off accumulator */ - lwz r5,PT_REGS(r4) - lwz r4,_MSR-STACK_FRAME_OVERHEAD(r5) - lis r10,MSR_SPE@h - andc r4,r4,r10 /* disable SPE for previous task */ - stw r4,_MSR-STACK_FRAME_OVERHEAD(r5) -1: -#endif /* CONFIG_SMP */ - /* enable use of SPE after return */ - oris r9,r9,MSR_SPE@h - mfspr r5,SPRN_SPRG3 /* current task's THREAD (phys) */ - li r4,1 - li r10,THREAD_ACC - stw r4,THREAD_USED_SPE(r5) - evlddx evr4,r10,r5 - evmra evr4,evr4 - REST_32EVRS(0,r10,r5) -#ifndef CONFIG_SMP - subi r4,r5,THREAD - stw r4,last_task_used_spe@l(r3) -#endif /* CONFIG_SMP */ - /* restore registers and return */ -2: REST_4GPRS(3, r11) - lwz r10,_CCR(r11) - REST_GPR(1, r11) - mtcr r10 - lwz r10,_LINK(r11) - mtlr r10 - REST_GPR(10, r11) - mtspr SPRN_SRR1,r9 - mtspr SPRN_SRR0,r12 - REST_GPR(9, r11) - REST_GPR(12, r11) - lwz r11,GPR11(r11) - rfi - -/* - * SPE unavailable trap from kernel - print a message, but let - * the task use SPE in the kernel until it returns to user mode. - */ -KernelSPE: - lwz r3,_MSR(r1) - oris r3,r3,MSR_SPE@h - stw r3,_MSR(r1) /* enable use of SPE after return */ - lis r3,87f@h - ori r3,r3,87f@l - mr r4,r2 /* current */ - lwz r5,_NIP(r1) - bl printk - b ret_from_except -87: .string "SPE used in kernel (task=%p, pc=%x) \n" - .align 4,0 - -#endif /* CONFIG_SPE */ - -/* - * Global functions - */ - -/* - * extern void loadcam_entry(unsigned int index) - * - * Load TLBCAM[index] entry in to the L2 CAM MMU - */ -_GLOBAL(loadcam_entry) - lis r4,TLBCAM@ha - addi r4,r4,TLBCAM@l - mulli r5,r3,20 - add r3,r5,r4 - lwz r4,0(r3) - mtspr SPRN_MAS0,r4 - lwz r4,4(r3) - mtspr SPRN_MAS1,r4 - lwz r4,8(r3) - mtspr SPRN_MAS2,r4 - lwz r4,12(r3) - mtspr SPRN_MAS3,r4 - tlbwe - isync - blr - -/* - * extern void giveup_altivec(struct task_struct *prev) - * - * The e500 core does not have an AltiVec unit. - */ -_GLOBAL(giveup_altivec) - blr - -#ifdef CONFIG_SPE -/* - * extern void giveup_spe(struct task_struct *prev) - * - */ -_GLOBAL(giveup_spe) - mfmsr r5 - oris r5,r5,MSR_SPE@h - mtmsr r5 /* enable use of SPE now */ - isync - cmpi 0,r3,0 - beqlr- /* if no previous owner, done */ - addi r3,r3,THREAD /* want THREAD of task */ - lwz r5,PT_REGS(r3) - cmpi 0,r5,0 - SAVE_32EVRS(0, r4, r3) - evxor evr6, evr6, evr6 /* clear out evr6 */ - evmwumiaa evr6, evr6, evr6 /* evr6 <- ACC = 0 * 0 + ACC */ - li r4,THREAD_ACC - evstddx evr6, r4, r3 /* save off accumulator */ - mfspr r6,SPRN_SPEFSCR - stw r6,THREAD_SPEFSCR(r3) /* save spefscr register value */ - beq 1f - lwz r4,_MSR-STACK_FRAME_OVERHEAD(r5) - lis r3,MSR_SPE@h - andc r4,r4,r3 /* disable SPE for previous task */ - stw r4,_MSR-STACK_FRAME_OVERHEAD(r5) -1: -#ifndef CONFIG_SMP - li r5,0 - lis r4,last_task_used_spe@ha - stw r5,last_task_used_spe@l(r4) -#endif /* CONFIG_SMP */ - blr -#endif /* CONFIG_SPE */ - -/* - * extern void giveup_fpu(struct task_struct *prev) - * - * Not all FSL Book-E cores have an FPU - */ -#ifndef CONFIG_PPC_FPU -_GLOBAL(giveup_fpu) - blr -#endif - -/* - * extern void abort(void) - * - * At present, this routine just applies a system reset. - */ -_GLOBAL(abort) - li r13,0 - mtspr SPRN_DBCR0,r13 /* disable all debug events */ - isync - mfmsr r13 - ori r13,r13,MSR_DE@l /* Enable Debug Events */ - mtmsr r13 - isync - mfspr r13,SPRN_DBCR0 - lis r13,(DBCR0_IDM|DBCR0_RST_CHIP)@h - mtspr SPRN_DBCR0,r13 - isync - -_GLOBAL(set_context) - -#ifdef CONFIG_BDI_SWITCH - /* Context switch the PTE pointer for the Abatron BDI2000. - * The PGDIR is the second parameter. - */ - lis r5, abatron_pteptrs@h - ori r5, r5, abatron_pteptrs@l - stw r4, 0x4(r5) -#endif - mtspr SPRN_PID,r3 - isync /* Force context change */ - blr - -/* - * We put a few things here that have to be page-aligned. This stuff - * goes at the beginning of the data segment, which is page-aligned. - */ - .data - .align 12 - .globl sdata -sdata: - .globl empty_zero_page -empty_zero_page: - .space 4096 - .globl swapper_pg_dir -swapper_pg_dir: - .space 4096 - -/* Reserved 4k for the critical exception stack & 4k for the machine - * check stack per CPU for kernel mode exceptions */ - .section .bss - .align 12 -exception_stack_bottom: - .space BOOKE_EXCEPTION_STACK_SIZE * NR_CPUS - .globl exception_stack_top -exception_stack_top: - -/* - * This space gets a copy of optional info passed to us by the bootstrap - * which is used to pass parameters into the kernel like root=/dev/sda1, etc. - */ - .globl cmd_line -cmd_line: - .space 512 - -/* - * Room for two PTE pointers, usually the kernel and current user pointers - * to their respective root page table. - */ -abatron_pteptrs: - .space 8 diff --git a/arch/ppc/kernel/misc.S b/arch/ppc/kernel/misc.S index e0c850d85c53..d5e0dfc9ffec 100644 --- a/arch/ppc/kernel/misc.S +++ b/arch/ppc/kernel/misc.S @@ -165,24 +165,7 @@ _GLOBAL(_tlbia) ble 1b isync -#elif defined(CONFIG_FSL_BOOKE) - /* Invalidate all entries in TLB0 */ - li r3, 0x04 - tlbivax 0,3 - /* Invalidate all entries in TLB1 */ - li r3, 0x0c - tlbivax 0,3 - /* Invalidate all entries in TLB2 */ - li r3, 0x14 - tlbivax 0,3 - /* Invalidate all entries in TLB3 */ - li r3, 0x1c - tlbivax 0,3 - msync -#ifdef CONFIG_SMP - tlbsync -#endif /* CONFIG_SMP */ -#else /* !(CONFIG_40x || CONFIG_44x || CONFIG_FSL_BOOKE) */ +#else /* !(CONFIG_40x || CONFIG_44x) */ #if defined(CONFIG_SMP) rlwinm r8,r1,0,0,18 lwz r8,TI_CPU(r8) @@ -268,20 +251,7 @@ _GLOBAL(_tlbie) tlbwe r3, r3, PPC44x_TLB_PAGEID isync 10: -#elif defined(CONFIG_FSL_BOOKE) - rlwinm r4, r3, 0, 0, 19 - ori r5, r4, 0x08 /* TLBSEL = 1 */ - ori r6, r4, 0x10 /* TLBSEL = 2 */ - ori r7, r4, 0x18 /* TLBSEL = 3 */ - tlbivax 0, r4 - tlbivax 0, r5 - tlbivax 0, r6 - tlbivax 0, r7 - msync -#if defined(CONFIG_SMP) - tlbsync -#endif /* CONFIG_SMP */ -#else /* !(CONFIG_40x || CONFIG_44x || CONFIG_FSL_BOOKE) */ +#else /* !(CONFIG_40x || CONFIG_44x) */ #if defined(CONFIG_SMP) rlwinm r8,r1,0,0,18 lwz r8,TI_CPU(r8) @@ -338,18 +308,6 @@ _GLOBAL(flush_instruction_cache) lis r3, KERNELBASE@h iccci 0,r3 #endif -#elif CONFIG_FSL_BOOKE -BEGIN_FTR_SECTION - mfspr r3,SPRN_L1CSR0 - ori r3,r3,L1CSR0_CFI|L1CSR0_CLFC - /* msync; isync recommended here */ - mtspr SPRN_L1CSR0,r3 - isync - blr -END_FTR_SECTION_IFSET(CPU_FTR_UNIFIED_ID_CACHE) - mfspr r3,SPRN_L1CSR1 - ori r3,r3,L1CSR1_ICFI|L1CSR1_ICLFR - mtspr SPRN_L1CSR1,r3 #else mfspr r3,SPRN_PVR rlwinm r3,r3,16,16,31 diff --git a/arch/ppc/kernel/ppc_ksyms.c b/arch/ppc/kernel/ppc_ksyms.c index 22494ec123ea..c35350250cfc 100644 --- a/arch/ppc/kernel/ppc_ksyms.c +++ b/arch/ppc/kernel/ppc_ksyms.c @@ -45,7 +45,7 @@ #include <asm/dcr.h> #ifdef CONFIG_8xx -#include <asm/commproc.h> +#include <asm/cpm1.h> #endif extern void transfer_to_handler(void); @@ -166,12 +166,6 @@ EXPORT_SYMBOL(last_task_used_altivec); #endif EXPORT_SYMBOL(giveup_altivec); #endif /* CONFIG_ALTIVEC */ -#ifdef CONFIG_SPE -#ifndef CONFIG_SMP -EXPORT_SYMBOL(last_task_used_spe); -#endif -EXPORT_SYMBOL(giveup_spe); -#endif /* CONFIG_SPE */ #ifdef CONFIG_SMP EXPORT_SYMBOL(smp_call_function); EXPORT_SYMBOL(smp_hw_index); @@ -244,8 +238,7 @@ EXPORT_SYMBOL(debugger_fault_handler); EXPORT_SYMBOL(cpm_install_handler); EXPORT_SYMBOL(cpm_free_handler); #endif /* CONFIG_8xx */ -#if defined(CONFIG_8xx) || defined(CONFIG_40x) || defined(CONFIG_85xx) ||\ - defined(CONFIG_83xx) +#if defined(CONFIG_8xx) || defined(CONFIG_40x) EXPORT_SYMBOL(__res); #endif diff --git a/arch/ppc/kernel/rio.c b/arch/ppc/kernel/rio.c deleted file mode 100644 index 29487fedfc76..000000000000 --- a/arch/ppc/kernel/rio.c +++ /dev/null @@ -1,52 +0,0 @@ -/* - * RapidIO PPC32 support - * - * Copyright 2005 MontaVista Software, Inc. - * Matt Porter <mporter@kernel.crashing.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/rio.h> - -#include <asm/rio.h> - -/** - * platform_rio_init - Do platform specific RIO init - * - * Any platform specific initialization of RapdIO - * hardware is done here as well as registration - * of any active master ports in the system. - */ -void __attribute__ ((weak)) - platform_rio_init(void) -{ - printk(KERN_WARNING "RIO: No platform_rio_init() present\n"); -} - -/** - * ppc_rio_init - Do PPC32 RIO init - * - * Calls platform-specific RIO init code and then calls - * rio_init_mports() to initialize any master ports that - * have been registered with the RIO subsystem. - */ -static int __init ppc_rio_init(void) -{ - printk(KERN_INFO "RIO: RapidIO init\n"); - - /* Platform specific initialization */ - platform_rio_init(); - - /* Enumerate all registered ports */ - rio_init_mports(); - - return 0; -} - -subsys_initcall(ppc_rio_init); diff --git a/arch/ppc/kernel/setup.c b/arch/ppc/kernel/setup.c index 5255bd80aa6b..d51368d72e39 100644 --- a/arch/ppc/kernel/setup.c +++ b/arch/ppc/kernel/setup.c @@ -37,10 +37,8 @@ #include <asm/nvram.h> #include <asm/xmon.h> #include <asm/ocp.h> -#include <asm/prom.h> -#define USES_PPC_SYS (defined(CONFIG_85xx) || defined(CONFIG_83xx) || \ - defined(CONFIG_MPC10X_BRIDGE) || defined(CONFIG_8260) || \ +#define USES_PPC_SYS (defined(CONFIG_MPC10X_BRIDGE) || defined(CONFIG_8260) || \ defined(CONFIG_PPC_MPC52xx)) #if USES_PPC_SYS diff --git a/arch/ppc/kernel/traps.c b/arch/ppc/kernel/traps.c index c78568905c3b..a467a429c2fe 100644 --- a/arch/ppc/kernel/traps.c +++ b/arch/ppc/kernel/traps.c @@ -194,11 +194,7 @@ static inline int check_io_access(struct pt_regs *regs) /* On 4xx, the reason for the machine check or program exception is in the ESR. */ #define get_reason(regs) ((regs)->dsisr) -#ifndef CONFIG_FSL_BOOKE #define get_mc_reason(regs) ((regs)->dsisr) -#else -#define get_mc_reason(regs) (mfspr(SPRN_MCSR)) -#endif #define REASON_FP ESR_FP #define REASON_ILLEGAL (ESR_PIL | ESR_PUO) #define REASON_PRIVILEGED ESR_PPR @@ -231,39 +227,25 @@ platform_machine_check(struct pt_regs *regs) { } -void machine_check_exception(struct pt_regs *regs) +#if defined(CONFIG_4xx) +int machine_check_4xx(struct pt_regs *regs) { unsigned long reason = get_mc_reason(regs); - if (user_mode(regs)) { - regs->msr |= MSR_RI; - _exception(SIGBUS, regs, BUS_ADRERR, regs->nip); - return; - } - -#if defined(CONFIG_8xx) && defined(CONFIG_PCI) - /* the qspan pci read routines can cause machine checks -- Cort */ - bad_page_fault(regs, regs->dar, SIGBUS); - return; -#endif - - if (debugger_fault_handler) { - debugger_fault_handler(regs); - regs->msr |= MSR_RI; - return; - } - - if (check_io_access(regs)) - return; - -#if defined(CONFIG_4xx) && !defined(CONFIG_440A) if (reason & ESR_IMCP) { printk("Instruction"); mtspr(SPRN_ESR, reason & ~ESR_IMCP); } else printk("Data"); printk(" machine check in kernel mode.\n"); -#elif defined(CONFIG_440A) + + return 0; +} + +int machine_check_440A(struct pt_regs *regs) +{ + unsigned long reason = get_mc_reason(regs); + printk("Machine check in kernel mode.\n"); if (reason & ESR_IMCP){ printk("Instruction Synchronous Machine Check exception\n"); @@ -293,55 +275,13 @@ void machine_check_exception(struct pt_regs *regs) /* Clear MCSR */ mtspr(SPRN_MCSR, mcsr); } -#elif defined (CONFIG_E500) - printk("Machine check in kernel mode.\n"); - printk("Caused by (from MCSR=%lx): ", reason); - - if (reason & MCSR_MCP) - printk("Machine Check Signal\n"); - if (reason & MCSR_ICPERR) - printk("Instruction Cache Parity Error\n"); - if (reason & MCSR_DCP_PERR) - printk("Data Cache Push Parity Error\n"); - if (reason & MCSR_DCPERR) - printk("Data Cache Parity Error\n"); - if (reason & MCSR_GL_CI) - printk("Guarded Load or Cache-Inhibited stwcx.\n"); - if (reason & MCSR_BUS_IAERR) - printk("Bus - Instruction Address Error\n"); - if (reason & MCSR_BUS_RAERR) - printk("Bus - Read Address Error\n"); - if (reason & MCSR_BUS_WAERR) - printk("Bus - Write Address Error\n"); - if (reason & MCSR_BUS_IBERR) - printk("Bus - Instruction Data Error\n"); - if (reason & MCSR_BUS_RBERR) - printk("Bus - Read Data Bus Error\n"); - if (reason & MCSR_BUS_WBERR) - printk("Bus - Write Data Bus Error\n"); - if (reason & MCSR_BUS_IPERR) - printk("Bus - Instruction Parity Error\n"); - if (reason & MCSR_BUS_RPERR) - printk("Bus - Read Parity Error\n"); -#elif defined (CONFIG_E200) - printk("Machine check in kernel mode.\n"); - printk("Caused by (from MCSR=%lx): ", reason); - - if (reason & MCSR_MCP) - printk("Machine Check Signal\n"); - if (reason & MCSR_CP_PERR) - printk("Cache Push Parity Error\n"); - if (reason & MCSR_CPERR) - printk("Cache Parity Error\n"); - if (reason & MCSR_EXCP_ERR) - printk("ISI, ITLB, or Bus Error on first instruction fetch for an exception handler\n"); - if (reason & MCSR_BUS_IRERR) - printk("Bus - Read Bus Error on instruction fetch\n"); - if (reason & MCSR_BUS_DRERR) - printk("Bus - Read Bus Error on data load\n"); - if (reason & MCSR_BUS_WRERR) - printk("Bus - Write Bus Error on buffered store or cache line push\n"); -#else /* !CONFIG_4xx && !CONFIG_E500 && !CONFIG_E200 */ + return 0; +} +#else +int machine_check_generic(struct pt_regs *regs) +{ + unsigned long reason = get_mc_reason(regs); + printk("Machine check in kernel mode.\n"); printk("Caused by (from SRR1=%lx): ", reason); switch (reason & 0x601F0000) { @@ -371,7 +311,39 @@ void machine_check_exception(struct pt_regs *regs) default: printk("Unknown values in msr\n"); } -#endif /* CONFIG_4xx */ + return 0; +} +#endif /* everything else */ + +void machine_check_exception(struct pt_regs *regs) +{ + int recover = 0; + + if (cur_cpu_spec->machine_check) + recover = cur_cpu_spec->machine_check(regs); + if (recover > 0) + return; + + if (user_mode(regs)) { + regs->msr |= MSR_RI; + _exception(SIGBUS, regs, BUS_ADRERR, regs->nip); + return; + } + +#if defined(CONFIG_8xx) && defined(CONFIG_PCI) + /* the qspan pci read routines can cause machine checks -- Cort */ + bad_page_fault(regs, regs->dar, SIGBUS); + return; +#endif + + if (debugger_fault_handler) { + debugger_fault_handler(regs); + regs->msr |= MSR_RI; + return; + } + + if (check_io_access(regs)) + return; /* * Optional platform-provided routine to print out @@ -830,63 +802,6 @@ void altivec_assist_exception(struct pt_regs *regs) } #endif /* CONFIG_ALTIVEC */ -#ifdef CONFIG_E500 -void performance_monitor_exception(struct pt_regs *regs) -{ - perf_irq(regs); -} -#endif - -#ifdef CONFIG_FSL_BOOKE -void CacheLockingException(struct pt_regs *regs, unsigned long address, - unsigned long error_code) -{ - /* We treat cache locking instructions from the user - * as priv ops, in the future we could try to do - * something smarter - */ - if (error_code & (ESR_DLK|ESR_ILK)) - _exception(SIGILL, regs, ILL_PRVOPC, regs->nip); - return; -} -#endif /* CONFIG_FSL_BOOKE */ - -#ifdef CONFIG_SPE -void SPEFloatingPointException(struct pt_regs *regs) -{ - unsigned long spefscr; - int fpexc_mode; - int code = 0; - - spefscr = current->thread.spefscr; - fpexc_mode = current->thread.fpexc_mode; - - /* Hardware does not necessarily set sticky - * underflow/overflow/invalid flags */ - if ((spefscr & SPEFSCR_FOVF) && (fpexc_mode & PR_FP_EXC_OVF)) { - code = FPE_FLTOVF; - spefscr |= SPEFSCR_FOVFS; - } - else if ((spefscr & SPEFSCR_FUNF) && (fpexc_mode & PR_FP_EXC_UND)) { - code = FPE_FLTUND; - spefscr |= SPEFSCR_FUNFS; - } - else if ((spefscr & SPEFSCR_FDBZ) && (fpexc_mode & PR_FP_EXC_DIV)) - code = FPE_FLTDIV; - else if ((spefscr & SPEFSCR_FINV) && (fpexc_mode & PR_FP_EXC_INV)) { - code = FPE_FLTINV; - spefscr |= SPEFSCR_FINVS; - } - else if ((spefscr & (SPEFSCR_FG | SPEFSCR_FX)) && (fpexc_mode & PR_FP_EXC_RES)) - code = FPE_FLTRES; - - current->thread.spefscr = spefscr; - - _exception(SIGFPE, regs, code, regs->nip); - return; -} -#endif - #ifdef CONFIG_BOOKE_WDT /* * Default handler for a Watchdog exception, diff --git a/arch/ppc/mm/44x_mmu.c b/arch/ppc/mm/44x_mmu.c index 6536a25cfcb8..fbb577a0d165 100644 --- a/arch/ppc/mm/44x_mmu.c +++ b/arch/ppc/mm/44x_mmu.c @@ -60,38 +60,28 @@ extern char etext[], _stext[]; * Just needed it declared someplace. */ unsigned int tlb_44x_index = 0; -unsigned int tlb_44x_hwater = 62; +unsigned int tlb_44x_hwater = PPC4XX_TLB_SIZE - 1 - PPC44x_EARLY_TLBS; int icache_44x_need_flush; /* * "Pins" a 256MB TLB entry in AS0 for kernel lowmem */ -static void __init -ppc44x_pin_tlb(int slot, unsigned int virt, unsigned int phys) +static void __init ppc44x_pin_tlb(unsigned int virt, unsigned int phys) { - unsigned long attrib = 0; - - __asm__ __volatile__("\ - clrrwi %2,%2,10\n\ - ori %2,%2,%4\n\ - clrrwi %1,%1,10\n\ - li %0,0\n\ - ori %0,%0,%5\n\ - tlbwe %2,%3,%6\n\ - tlbwe %1,%3,%7\n\ - tlbwe %0,%3,%8" + __asm__ __volatile__( + "tlbwe %2,%3,%4\n" + "tlbwe %1,%3,%5\n" + "tlbwe %0,%3,%6\n" : - : "r" (attrib), "r" (phys), "r" (virt), "r" (slot), - "i" (PPC44x_TLB_VALID | PPC44x_TLB_256M), - "i" (PPC44x_TLB_SW | PPC44x_TLB_SR | PPC44x_TLB_SX | PPC44x_TLB_G), + : "r" (PPC44x_TLB_SW | PPC44x_TLB_SR | PPC44x_TLB_SX | PPC44x_TLB_G), + "r" (phys), + "r" (virt | PPC44x_TLB_VALID | PPC44x_TLB_256M), + "r" (tlb_44x_hwater--), /* slot for this TLB entry */ "i" (PPC44x_TLB_PAGEID), "i" (PPC44x_TLB_XLAT), "i" (PPC44x_TLB_ATTRIB)); } -/* - * MMU_init_hw does the chip-specific initialization of the MMU hardware. - */ void __init MMU_init_hw(void) { flush_instruction_cache(); @@ -99,22 +89,13 @@ void __init MMU_init_hw(void) unsigned long __init mmu_mapin_ram(void) { - unsigned int pinned_tlbs = 1; - int i; - - /* Determine number of entries necessary to cover lowmem */ - pinned_tlbs = (unsigned int) - (_ALIGN(total_lowmem, PPC_PIN_SIZE) >> PPC44x_PIN_SHIFT); - - /* Write upper watermark to save location */ - tlb_44x_hwater = PPC44x_LOW_SLOT - pinned_tlbs; + unsigned long addr; - /* If necessary, set additional pinned TLBs */ - if (pinned_tlbs > 1) - for (i = (PPC44x_LOW_SLOT-(pinned_tlbs-1)); i < PPC44x_LOW_SLOT; i++) { - unsigned int phys_addr = (PPC44x_LOW_SLOT-i) * PPC_PIN_SIZE; - ppc44x_pin_tlb(i, phys_addr+PAGE_OFFSET, phys_addr); - } + /* Pin in enough TLBs to cover any lowmem not covered by the + * initial 256M mapping established in head_44x.S */ + for (addr = PPC_PIN_SIZE; addr < total_lowmem; + addr += PPC_PIN_SIZE) + ppc44x_pin_tlb(addr + PAGE_OFFSET, addr); return total_lowmem; } diff --git a/arch/ppc/mm/Makefile b/arch/ppc/mm/Makefile index cd3eae147cf8..691ba2bae05d 100644 --- a/arch/ppc/mm/Makefile +++ b/arch/ppc/mm/Makefile @@ -8,4 +8,3 @@ obj-y := fault.o init.o mem_pieces.o \ obj-$(CONFIG_PPC_STD_MMU) += hashtable.o ppc_mmu.o tlb.o obj-$(CONFIG_40x) += 4xx_mmu.o obj-$(CONFIG_44x) += 44x_mmu.o -obj-$(CONFIG_FSL_BOOKE) += fsl_booke_mmu.o diff --git a/arch/ppc/mm/fsl_booke_mmu.c b/arch/ppc/mm/fsl_booke_mmu.c deleted file mode 100644 index 123da03ab118..000000000000 --- a/arch/ppc/mm/fsl_booke_mmu.c +++ /dev/null @@ -1,236 +0,0 @@ -/* - * Modifications by Kumar Gala (galak@kernel.crashing.org) to support - * E500 Book E processors. - * - * Copyright 2004 Freescale Semiconductor, Inc - * - * This file contains the routines for initializing the MMU - * on the 4xx series of chips. - * -- paulus - * - * Derived from arch/ppc/mm/init.c: - * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) - * - * Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au) - * and Cort Dougan (PReP) (cort@cs.nmt.edu) - * Copyright (C) 1996 Paul Mackerras - * Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk). - * - * Derived from "arch/i386/mm/init.c" - * Copyright (C) 1991, 1992, 1993, 1994 Linus Torvalds - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - */ - -#include <linux/signal.h> -#include <linux/sched.h> -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/string.h> -#include <linux/types.h> -#include <linux/ptrace.h> -#include <linux/mman.h> -#include <linux/mm.h> -#include <linux/swap.h> -#include <linux/stddef.h> -#include <linux/vmalloc.h> -#include <linux/init.h> -#include <linux/delay.h> -#include <linux/highmem.h> - -#include <asm/pgalloc.h> -#include <asm/prom.h> -#include <asm/io.h> -#include <asm/mmu_context.h> -#include <asm/pgtable.h> -#include <asm/mmu.h> -#include <asm/uaccess.h> -#include <asm/smp.h> -#include <asm/bootx.h> -#include <asm/machdep.h> -#include <asm/setup.h> - -extern void loadcam_entry(unsigned int index); -unsigned int tlbcam_index; -unsigned int num_tlbcam_entries; -static unsigned long __cam0, __cam1, __cam2; -extern unsigned long total_lowmem; -extern unsigned long __max_low_memory; -#define MAX_LOW_MEM CONFIG_LOWMEM_SIZE - -#define NUM_TLBCAMS (16) - -struct tlbcam { - u32 MAS0; - u32 MAS1; - u32 MAS2; - u32 MAS3; - u32 MAS7; -} TLBCAM[NUM_TLBCAMS]; - -struct tlbcamrange { - unsigned long start; - unsigned long limit; - phys_addr_t phys; -} tlbcam_addrs[NUM_TLBCAMS]; - -extern unsigned int tlbcam_index; - -/* - * Return PA for this VA if it is mapped by a CAM, or 0 - */ -unsigned long v_mapped_by_tlbcam(unsigned long va) -{ - int b; - for (b = 0; b < tlbcam_index; ++b) - if (va >= tlbcam_addrs[b].start && va < tlbcam_addrs[b].limit) - return tlbcam_addrs[b].phys + (va - tlbcam_addrs[b].start); - return 0; -} - -/* - * Return VA for a given PA or 0 if not mapped - */ -unsigned long p_mapped_by_tlbcam(unsigned long pa) -{ - int b; - for (b = 0; b < tlbcam_index; ++b) - if (pa >= tlbcam_addrs[b].phys - && pa < (tlbcam_addrs[b].limit-tlbcam_addrs[b].start) - +tlbcam_addrs[b].phys) - return tlbcam_addrs[b].start+(pa-tlbcam_addrs[b].phys); - return 0; -} - -/* - * Set up one of the I/D BAT (block address translation) register pairs. - * The parameters are not checked; in particular size must be a power - * of 4 between 4k and 256M. - */ -void settlbcam(int index, unsigned long virt, phys_addr_t phys, - unsigned int size, int flags, unsigned int pid) -{ - unsigned int tsize, lz; - - asm ("cntlzw %0,%1" : "=r" (lz) : "r" (size)); - tsize = (21 - lz) / 2; - -#ifdef CONFIG_SMP - if ((flags & _PAGE_NO_CACHE) == 0) - flags |= _PAGE_COHERENT; -#endif - - TLBCAM[index].MAS0 = MAS0_TLBSEL(1) | MAS0_ESEL(index) | MAS0_NV(index+1); - TLBCAM[index].MAS1 = MAS1_VALID | MAS1_IPROT | MAS1_TSIZE(tsize) | MAS1_TID(pid); - TLBCAM[index].MAS2 = virt & PAGE_MASK; - - TLBCAM[index].MAS2 |= (flags & _PAGE_WRITETHRU) ? MAS2_W : 0; - TLBCAM[index].MAS2 |= (flags & _PAGE_NO_CACHE) ? MAS2_I : 0; - TLBCAM[index].MAS2 |= (flags & _PAGE_COHERENT) ? MAS2_M : 0; - TLBCAM[index].MAS2 |= (flags & _PAGE_GUARDED) ? MAS2_G : 0; - TLBCAM[index].MAS2 |= (flags & _PAGE_ENDIAN) ? MAS2_E : 0; - - TLBCAM[index].MAS3 = (phys & PAGE_MASK) | MAS3_SX | MAS3_SR; - TLBCAM[index].MAS3 |= ((flags & _PAGE_RW) ? MAS3_SW : 0); - -#ifndef CONFIG_KGDB /* want user access for breakpoints */ - if (flags & _PAGE_USER) { - TLBCAM[index].MAS3 |= MAS3_UX | MAS3_UR; - TLBCAM[index].MAS3 |= ((flags & _PAGE_RW) ? MAS3_UW : 0); - } -#else - TLBCAM[index].MAS3 |= MAS3_UX | MAS3_UR; - TLBCAM[index].MAS3 |= ((flags & _PAGE_RW) ? MAS3_UW : 0); -#endif - - tlbcam_addrs[index].start = virt; - tlbcam_addrs[index].limit = virt + size - 1; - tlbcam_addrs[index].phys = phys; - - loadcam_entry(index); -} - -void invalidate_tlbcam_entry(int index) -{ - TLBCAM[index].MAS0 = MAS0_TLBSEL(1) | MAS0_ESEL(index); - TLBCAM[index].MAS1 = ~MAS1_VALID; - - loadcam_entry(index); -} - -void __init cam_mapin_ram(unsigned long cam0, unsigned long cam1, - unsigned long cam2) -{ - settlbcam(0, KERNELBASE, PPC_MEMSTART, cam0, _PAGE_KERNEL, 0); - tlbcam_index++; - if (cam1) { - tlbcam_index++; - settlbcam(1, KERNELBASE+cam0, PPC_MEMSTART+cam0, cam1, _PAGE_KERNEL, 0); - } - if (cam2) { - tlbcam_index++; - settlbcam(2, KERNELBASE+cam0+cam1, PPC_MEMSTART+cam0+cam1, cam2, _PAGE_KERNEL, 0); - } -} - -/* - * MMU_init_hw does the chip-specific initialization of the MMU hardware. - */ -void __init MMU_init_hw(void) -{ - flush_instruction_cache(); -} - -unsigned long __init mmu_mapin_ram(void) -{ - cam_mapin_ram(__cam0, __cam1, __cam2); - - return __cam0 + __cam1 + __cam2; -} - - -void __init -adjust_total_lowmem(void) -{ - unsigned long max_low_mem = MAX_LOW_MEM; - unsigned long cam_max = 0x10000000; - unsigned long ram; - - /* adjust CAM size to max_low_mem */ - if (max_low_mem < cam_max) - cam_max = max_low_mem; - - /* adjust lowmem size to max_low_mem */ - if (max_low_mem < total_lowmem) - ram = max_low_mem; - else - ram = total_lowmem; - - /* Calculate CAM values */ - __cam0 = 1UL << 2 * (__ilog2(ram) / 2); - if (__cam0 > cam_max) - __cam0 = cam_max; - ram -= __cam0; - if (ram) { - __cam1 = 1UL << 2 * (__ilog2(ram) / 2); - if (__cam1 > cam_max) - __cam1 = cam_max; - ram -= __cam1; - } - if (ram) { - __cam2 = 1UL << 2 * (__ilog2(ram) / 2); - if (__cam2 > cam_max) - __cam2 = cam_max; - ram -= __cam2; - } - - printk(KERN_INFO "Memory CAM mapping: CAM0=%ldMb, CAM1=%ldMb," - " CAM2=%ldMb residual: %ldMb\n", - __cam0 >> 20, __cam1 >> 20, __cam2 >> 20, - (total_lowmem - __cam0 - __cam1 - __cam2) >> 20); - __max_low_memory = max_low_mem = __cam0 + __cam1 + __cam2; -} diff --git a/arch/ppc/mm/init.c b/arch/ppc/mm/init.c index dd898d32480e..7444df3889c5 100644 --- a/arch/ppc/mm/init.c +++ b/arch/ppc/mm/init.c @@ -241,12 +241,6 @@ void __init MMU_init(void) if (__max_memory && total_memory > __max_memory) total_memory = __max_memory; total_lowmem = total_memory; -#ifdef CONFIG_FSL_BOOKE - /* Freescale Book-E parts expect lowmem to be mapped by fixed TLB - * entries, so we need to adjust lowmem to match the amount we can map - * in the fixed entries */ - adjust_total_lowmem(); -#endif /* CONFIG_FSL_BOOKE */ if (total_lowmem > __max_low_memory) { total_lowmem = __max_low_memory; #ifndef CONFIG_HIGHMEM diff --git a/arch/ppc/mm/mmu_context.c b/arch/ppc/mm/mmu_context.c index 85afa7f8aa78..dacf45ced473 100644 --- a/arch/ppc/mm/mmu_context.c +++ b/arch/ppc/mm/mmu_context.c @@ -2,7 +2,7 @@ * This file contains the routines for handling the MMU on those * PowerPC implementations where the MMU substantially follows the * architecture specification. This includes the 6xx, 7xx, 7xxx, - * 8260, and 83xx implementations but excludes the 8xx and 4xx. + * and 8260 implementations but excludes the 8xx and 4xx. * -- paulus * * Derived from arch/ppc/mm/init.c: diff --git a/arch/ppc/mm/mmu_decl.h b/arch/ppc/mm/mmu_decl.h index b298b60c202f..5f813e386b87 100644 --- a/arch/ppc/mm/mmu_decl.h +++ b/arch/ppc/mm/mmu_decl.h @@ -58,12 +58,6 @@ extern unsigned int num_tlbcam_entries; extern void MMU_init_hw(void); extern unsigned long mmu_mapin_ram(void); -#elif defined(CONFIG_FSL_BOOKE) -#define flush_HPTE(pid, va, pg) _tlbie(va, pid) -extern void MMU_init_hw(void); -extern unsigned long mmu_mapin_ram(void); -extern void adjust_total_lowmem(void); - #else /* anything except 4xx or 8xx */ extern void MMU_init_hw(void); diff --git a/arch/ppc/mm/pgtable.c b/arch/ppc/mm/pgtable.c index 1f51e6c94507..fadacfd18806 100644 --- a/arch/ppc/mm/pgtable.c +++ b/arch/ppc/mm/pgtable.c @@ -42,10 +42,6 @@ int io_bat_index; #define HAVE_BATS 1 #endif -#if defined(CONFIG_FSL_BOOKE) -#define HAVE_TLBCAM 1 -#endif - extern char etext[], _stext[]; #ifdef CONFIG_SMP @@ -63,15 +59,6 @@ void setbat(int index, unsigned long virt, unsigned long phys, #define p_mapped_by_bats(x) (0UL) #endif /* HAVE_BATS */ -#ifdef HAVE_TLBCAM -extern unsigned int tlbcam_index; -extern unsigned long v_mapped_by_tlbcam(unsigned long va); -extern unsigned long p_mapped_by_tlbcam(unsigned long pa); -#else /* !HAVE_TLBCAM */ -#define v_mapped_by_tlbcam(x) (0UL) -#define p_mapped_by_tlbcam(x) (0UL) -#endif /* HAVE_TLBCAM */ - #ifdef CONFIG_PTE_64BIT /* 44x uses an 8kB pgdir because it has 8-byte Linux PTEs. */ #define PGDIR_ORDER 1 @@ -213,9 +200,6 @@ __ioremap(phys_addr_t addr, unsigned long size, unsigned long flags) if ((v = p_mapped_by_bats(p)) /*&& p_mapped_by_bats(p+size-1)*/ ) goto out; - if ((v = p_mapped_by_tlbcam(p))) - goto out; - if (mem_init_done) { struct vm_struct *area; area = get_vm_area(size, VM_IOREMAP); @@ -341,18 +325,6 @@ void __init io_block_mapping(unsigned long virt, phys_addr_t phys, } #endif /* HAVE_BATS */ -#ifdef HAVE_TLBCAM - /* - * Use a CAM for this if possible... - */ - if (tlbcam_index < num_tlbcam_entries && is_power_of_4(size) - && (virt & (size - 1)) == 0 && (phys & (size - 1)) == 0) { - settlbcam(tlbcam_index, virt, phys, size, flags, 0); - ++tlbcam_index; - return; - } -#endif /* HAVE_TLBCAM */ - /* No BATs available, put it in the page tables. */ for (i = 0; i < size; i += PAGE_SIZE) map_page(virt + i, phys + i, flags); diff --git a/arch/ppc/mm/ppc_mmu.c b/arch/ppc/mm/ppc_mmu.c index 973f1e6afa53..0c1dc155996a 100644 --- a/arch/ppc/mm/ppc_mmu.c +++ b/arch/ppc/mm/ppc_mmu.c @@ -2,7 +2,7 @@ * This file contains the routines for handling the MMU on those * PowerPC implementations where the MMU substantially follows the * architecture specification. This includes the 6xx, 7xx, 7xxx, - * 8260, and 83xx implementations but excludes the 8xx and 4xx. + * and 8260 implementations but excludes the 8xx and 4xx. * -- paulus * * Derived from arch/ppc/mm/init.c: diff --git a/arch/ppc/platforms/83xx/Makefile b/arch/ppc/platforms/83xx/Makefile deleted file mode 100644 index eb55341d6a17..000000000000 --- a/arch/ppc/platforms/83xx/Makefile +++ /dev/null @@ -1,4 +0,0 @@ -# -# Makefile for the PowerPC 83xx linux kernel. -# -obj-$(CONFIG_MPC834x_SYS) += mpc834x_sys.o diff --git a/arch/ppc/platforms/83xx/mpc834x_sys.c b/arch/ppc/platforms/83xx/mpc834x_sys.c deleted file mode 100644 index cb0a7493ff64..000000000000 --- a/arch/ppc/platforms/83xx/mpc834x_sys.c +++ /dev/null @@ -1,326 +0,0 @@ -/* - * MPC834x SYS board specific routines - * - * Maintainer: Kumar Gala <galak@kernel.crashing.org> - * - * Copyright 2005 Freescale Semiconductor Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include <linux/stddef.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/errno.h> -#include <linux/reboot.h> -#include <linux/pci.h> -#include <linux/kdev_t.h> -#include <linux/major.h> -#include <linux/console.h> -#include <linux/delay.h> -#include <linux/seq_file.h> -#include <linux/root_dev.h> -#include <linux/serial.h> -#include <linux/tty.h> /* for linux/serial_core.h */ -#include <linux/serial_core.h> -#include <linux/initrd.h> -#include <linux/module.h> -#include <linux/fsl_devices.h> - -#include <asm/system.h> -#include <asm/pgtable.h> -#include <asm/page.h> -#include <asm/atomic.h> -#include <asm/time.h> -#include <asm/io.h> -#include <asm/machdep.h> -#include <asm/ipic.h> -#include <asm/bootinfo.h> -#include <asm/pci-bridge.h> -#include <asm/mpc83xx.h> -#include <asm/irq.h> -#include <asm/kgdb.h> -#include <asm/ppc_sys.h> -#include <mm/mmu_decl.h> - -#include <syslib/ppc83xx_setup.h> - -#ifndef CONFIG_PCI -unsigned long isa_io_base = 0; -unsigned long isa_mem_base = 0; -#endif - -extern unsigned long total_memory; /* in mm/init */ - -unsigned char __res[sizeof (bd_t)]; - -#ifdef CONFIG_PCI -int -mpc83xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) -{ - static char pci_irq_table[][4] = - /* - * PCI IDSEL/INTPIN->INTLINE - * A B C D - */ - { - {PIRQA, PIRQB, PIRQC, PIRQD}, /* idsel 0x11 */ - {PIRQC, PIRQD, PIRQA, PIRQB}, /* idsel 0x12 */ - {PIRQD, PIRQA, PIRQB, PIRQC}, /* idsel 0x13 */ - {0, 0, 0, 0}, - {PIRQA, PIRQB, PIRQC, PIRQD}, /* idsel 0x15 */ - {PIRQD, PIRQA, PIRQB, PIRQC}, /* idsel 0x16 */ - {PIRQC, PIRQD, PIRQA, PIRQB}, /* idsel 0x17 */ - {PIRQB, PIRQC, PIRQD, PIRQA}, /* idsel 0x18 */ - {0, 0, 0, 0}, /* idsel 0x19 */ - {0, 0, 0, 0}, /* idsel 0x20 */ - }; - - const long min_idsel = 0x11, max_idsel = 0x20, irqs_per_slot = 4; - return PCI_IRQ_TABLE_LOOKUP; -} - -int -mpc83xx_exclude_device(u_char bus, u_char devfn) -{ - return PCIBIOS_SUCCESSFUL; -} -#endif /* CONFIG_PCI */ - -/* ************************************************************************ - * - * Setup the architecture - * - */ -static void __init -mpc834x_sys_setup_arch(void) -{ - bd_t *binfo = (bd_t *) __res; - unsigned int freq; - struct gianfar_platform_data *pdata; - struct gianfar_mdio_data *mdata; - - /* get the core frequency */ - freq = binfo->bi_intfreq; - - /* Set loops_per_jiffy to a half-way reasonable value, - for use until calibrate_delay gets called. */ - loops_per_jiffy = freq / HZ; - -#ifdef CONFIG_PCI - /* setup PCI host bridges */ - mpc83xx_setup_hose(); -#endif - mpc83xx_early_serial_map(); - - /* setup the board related info for the MDIO bus */ - mdata = (struct gianfar_mdio_data *) ppc_sys_get_pdata(MPC83xx_MDIO); - - mdata->irq[0] = MPC83xx_IRQ_EXT1; - mdata->irq[1] = MPC83xx_IRQ_EXT2; - mdata->irq[2] = PHY_POLL; - mdata->irq[31] = PHY_POLL; - - /* setup the board related information for the enet controllers */ - pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC83xx_TSEC1); - if (pdata) { - pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR; - pdata->bus_id = 0; - pdata->phy_id = 0; - memcpy(pdata->mac_addr, binfo->bi_enetaddr, 6); - } - - pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC83xx_TSEC2); - if (pdata) { - pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR; - pdata->bus_id = 0; - pdata->phy_id = 1; - memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6); - } - -#ifdef CONFIG_BLK_DEV_INITRD - if (initrd_start) - ROOT_DEV = Root_RAM0; - else -#endif -#ifdef CONFIG_ROOT_NFS - ROOT_DEV = Root_NFS; -#else - ROOT_DEV = Root_HDA1; -#endif -} - -static void __init -mpc834x_sys_map_io(void) -{ - /* we steal the lowest ioremap addr for virt space */ - io_block_mapping(VIRT_IMMRBAR, immrbar, 1024*1024, _PAGE_IO); -} - -int -mpc834x_sys_show_cpuinfo(struct seq_file *m) -{ - uint pvid, svid, phid1; - bd_t *binfo = (bd_t *) __res; - unsigned int freq; - - /* get the core frequency */ - freq = binfo->bi_intfreq; - - pvid = mfspr(SPRN_PVR); - svid = mfspr(SPRN_SVR); - - seq_printf(m, "Vendor\t\t: Freescale Inc.\n"); - seq_printf(m, "Machine\t\t: mpc%s sys\n", cur_ppc_sys_spec->ppc_sys_name); - seq_printf(m, "core clock\t: %d MHz\n" - "bus clock\t: %d MHz\n", - (int)(binfo->bi_intfreq / 1000000), - (int)(binfo->bi_busfreq / 1000000)); - seq_printf(m, "PVR\t\t: 0x%x\n", pvid); - seq_printf(m, "SVR\t\t: 0x%x\n", svid); - - /* Display cpu Pll setting */ - phid1 = mfspr(SPRN_HID1); - seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f)); - - /* Display the amount of memory */ - seq_printf(m, "Memory\t\t: %d MB\n", (int)(binfo->bi_memsize / (1024 * 1024))); - - return 0; -} - - -void __init -mpc834x_sys_init_IRQ(void) -{ - bd_t *binfo = (bd_t *) __res; - - u8 senses[8] = { - 0, /* EXT 0 */ - IRQ_SENSE_LEVEL, /* EXT 1 */ - IRQ_SENSE_LEVEL, /* EXT 2 */ - 0, /* EXT 3 */ -#ifdef CONFIG_PCI - IRQ_SENSE_LEVEL, /* EXT 4 */ - IRQ_SENSE_LEVEL, /* EXT 5 */ - IRQ_SENSE_LEVEL, /* EXT 6 */ - IRQ_SENSE_LEVEL, /* EXT 7 */ -#else - 0, /* EXT 4 */ - 0, /* EXT 5 */ - 0, /* EXT 6 */ - 0, /* EXT 7 */ -#endif - }; - - ipic_init(binfo->bi_immr_base + 0x00700, 0, MPC83xx_IPIC_IRQ_OFFSET, senses, 8); - - /* Initialize the default interrupt mapping priorities, - * in case the boot rom changed something on us. - */ - ipic_set_default_priority(); -} - -static __inline__ void -mpc834x_sys_set_bat(void) -{ - /* we steal the lowest ioremap addr for virt space */ - mb(); - mtspr(SPRN_DBAT1U, VIRT_IMMRBAR | 0x1e); - mtspr(SPRN_DBAT1L, immrbar | 0x2a); - mb(); -} - -void __init -platform_init(unsigned long r3, unsigned long r4, unsigned long r5, - unsigned long r6, unsigned long r7) -{ - bd_t *binfo = (bd_t *) __res; - - /* parse_bootinfo must always be called first */ - parse_bootinfo(find_bootinfo()); - - /* - * If we were passed in a board information, copy it into the - * residual data area. - */ - if (r3) { - memcpy((void *) __res, (void *) (r3 + KERNELBASE), - sizeof (bd_t)); - } - -#if defined(CONFIG_BLK_DEV_INITRD) - /* - * If the init RAM disk has been configured in, and there's a valid - * starting address for it, set it up. - */ - if (r4) { - initrd_start = r4 + KERNELBASE; - initrd_end = r5 + KERNELBASE; - } -#endif /* CONFIG_BLK_DEV_INITRD */ - - /* Copy the kernel command line arguments to a safe place. */ - if (r6) { - *(char *) (r7 + KERNELBASE) = 0; - strcpy(cmd_line, (char *) (r6 + KERNELBASE)); - } - - immrbar = binfo->bi_immr_base; - - mpc834x_sys_set_bat(); - -#if defined(CONFIG_SERIAL_8250) && defined(CONFIG_SERIAL_TEXT_DEBUG) - { - struct uart_port p; - - memset(&p, 0, sizeof (p)); - p.iotype = UPIO_MEM; - p.membase = (unsigned char __iomem *)(VIRT_IMMRBAR + 0x4500); - p.uartclk = binfo->bi_busfreq; - - gen550_init(0, &p); - - memset(&p, 0, sizeof (p)); - p.iotype = UPIO_MEM; - p.membase = (unsigned char __iomem *)(VIRT_IMMRBAR + 0x4600); - p.uartclk = binfo->bi_busfreq; - - gen550_init(1, &p); - } -#endif - - identify_ppc_sys_by_id(mfspr(SPRN_SVR)); - - /* setup the PowerPC module struct */ - ppc_md.setup_arch = mpc834x_sys_setup_arch; - ppc_md.show_cpuinfo = mpc834x_sys_show_cpuinfo; - - ppc_md.init_IRQ = mpc834x_sys_init_IRQ; - ppc_md.get_irq = ipic_get_irq; - - ppc_md.restart = mpc83xx_restart; - ppc_md.power_off = mpc83xx_power_off; - ppc_md.halt = mpc83xx_halt; - - ppc_md.find_end_of_memory = mpc83xx_find_end_of_memory; - ppc_md.setup_io_mappings = mpc834x_sys_map_io; - - ppc_md.time_init = mpc83xx_time_init; - ppc_md.set_rtc_time = NULL; - ppc_md.get_rtc_time = NULL; - ppc_md.calibrate_decr = mpc83xx_calibrate_decr; - - ppc_md.early_serial_map = mpc83xx_early_serial_map; -#if defined(CONFIG_SERIAL_8250) && defined(CONFIG_SERIAL_TEXT_DEBUG) - ppc_md.progress = gen550_progress; -#endif /* CONFIG_SERIAL_8250 && CONFIG_SERIAL_TEXT_DEBUG */ - - if (ppc_md.progress) - ppc_md.progress("mpc834x_sys_init(): exit", 0); - - return; -} diff --git a/arch/ppc/platforms/83xx/mpc834x_sys.h b/arch/ppc/platforms/83xx/mpc834x_sys.h deleted file mode 100644 index d2e06c95b083..000000000000 --- a/arch/ppc/platforms/83xx/mpc834x_sys.h +++ /dev/null @@ -1,54 +0,0 @@ -/* - * MPC834X SYS common board definitions - * - * Maintainer: Kumar Gala <galak@kernel.crashing.org> - * - * Copyright 2005 Freescale Semiconductor, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -#ifndef __MACH_MPC83XX_SYS_H__ -#define __MACH_MPC83XX_SYS_H__ - -#include <linux/init.h> -#include <syslib/ppc83xx_setup.h> -#include <asm/ppcboot.h> - -#define VIRT_IMMRBAR ((uint)0xfe000000) - -#define BCSR_PHYS_ADDR ((uint)0xf8000000) -#define BCSR_SIZE ((uint)(32 * 1024)) - -#define BCSR_MISC_REG2_OFF 0x07 -#define BCSR_MISC_REG2_PORESET 0x01 - -#define BCSR_MISC_REG3_OFF 0x08 -#define BCSR_MISC_REG3_CNFLOCK 0x80 - -#define PIRQA MPC83xx_IRQ_EXT4 -#define PIRQB MPC83xx_IRQ_EXT5 -#define PIRQC MPC83xx_IRQ_EXT6 -#define PIRQD MPC83xx_IRQ_EXT7 - -#define MPC83xx_PCI1_LOWER_IO 0x00000000 -#define MPC83xx_PCI1_UPPER_IO 0x00ffffff -#define MPC83xx_PCI1_LOWER_MEM 0x80000000 -#define MPC83xx_PCI1_UPPER_MEM 0x9fffffff -#define MPC83xx_PCI1_IO_BASE 0xe2000000 -#define MPC83xx_PCI1_MEM_OFFSET 0x00000000 -#define MPC83xx_PCI1_IO_SIZE 0x01000000 - -#define MPC83xx_PCI2_LOWER_IO 0x00000000 -#define MPC83xx_PCI2_UPPER_IO 0x00ffffff -#define MPC83xx_PCI2_LOWER_MEM 0xa0000000 -#define MPC83xx_PCI2_UPPER_MEM 0xbfffffff -#define MPC83xx_PCI2_IO_BASE 0xe3000000 -#define MPC83xx_PCI2_MEM_OFFSET 0x00000000 -#define MPC83xx_PCI2_IO_SIZE 0x01000000 - -#endif /* __MACH_MPC83XX_SYS_H__ */ diff --git a/arch/ppc/platforms/85xx/Kconfig b/arch/ppc/platforms/85xx/Kconfig deleted file mode 100644 index 6f2d0add7de6..000000000000 --- a/arch/ppc/platforms/85xx/Kconfig +++ /dev/null @@ -1,106 +0,0 @@ -config 85xx - bool - depends on E500 - default y - -config PPC_INDIRECT_PCI_BE - bool - depends on 85xx - default y - -menu "Freescale 85xx options" - depends on E500 - -choice - prompt "Machine Type" - depends on 85xx - default MPC8540_ADS - -config MPC8540_ADS - bool "Freescale MPC8540 ADS" - help - This option enables support for the MPC 8540 ADS evaluation board. - -config MPC8548_CDS - bool "Freescale MPC8548 CDS" - help - This option enables support for the MPC8548 CDS evaluation board. - -config MPC8555_CDS - bool "Freescale MPC8555 CDS" - help - This option enables support for the MPC8555 CDS evaluation board. - -config MPC8560_ADS - bool "Freescale MPC8560 ADS" - help - This option enables support for the MPC 8560 ADS evaluation board. - -config SBC8560 - bool "WindRiver PowerQUICC III SBC8560" - help - This option enables support for the WindRiver PowerQUICC III - SBC8560 board. - -config STX_GP3 - bool "Silicon Turnkey Express GP3" - help - This option enables support for the Silicon Turnkey Express GP3 - board. - -config TQM8540 - bool "TQ Components TQM8540" - help - This option enables support for the TQ Components TQM8540 board. - -config TQM8541 - bool "TQ Components TQM8541" - help - This option enables support for the TQ Components TQM8541 board. - -config TQM8555 - bool "TQ Components TQM8555" - help - This option enables support for the TQ Components TQM8555 board. - -config TQM8560 - bool "TQ Components TQM8560" - help - This option enables support for the TQ Components TQM8560 board. - -endchoice - -# It's often necessary to know the specific 85xx processor type. -# Fortunately, it is implied (so far) from the board type, so we -# don't need to ask more redundant questions. -config MPC8540 - bool - depends on MPC8540_ADS || TQM8540 - default y - -config MPC8548 - bool - depends on MPC8548_CDS - default y - -config MPC8555 - bool - depends on MPC8555_CDS || TQM8541 || TQM8555 - default y - -config MPC8560 - bool - depends on SBC8560 || MPC8560_ADS || STX_GP3 || TQM8560 - default y - -config 85xx_PCI2 - bool "Support for 2nd PCI host controller" - depends on MPC8555_CDS - default y - -config PPC_GEN550 - bool - depends on MPC8540 || SBC8560 || MPC8555 - default y - -endmenu diff --git a/arch/ppc/platforms/85xx/Makefile b/arch/ppc/platforms/85xx/Makefile deleted file mode 100644 index 6c4753c144d3..000000000000 --- a/arch/ppc/platforms/85xx/Makefile +++ /dev/null @@ -1,13 +0,0 @@ -# -# Makefile for the PowerPC 85xx linux kernel. -# -obj-$(CONFIG_MPC8540_ADS) += mpc85xx_ads_common.o mpc8540_ads.o -obj-$(CONFIG_MPC8548_CDS) += mpc85xx_cds_common.o -obj-$(CONFIG_MPC8555_CDS) += mpc85xx_cds_common.o -obj-$(CONFIG_MPC8560_ADS) += mpc85xx_ads_common.o mpc8560_ads.o -obj-$(CONFIG_SBC8560) += sbc85xx.o sbc8560.o -obj-$(CONFIG_STX_GP3) += stx_gp3.o -obj-$(CONFIG_TQM8540) += tqm85xx.o -obj-$(CONFIG_TQM8541) += tqm85xx.o -obj-$(CONFIG_TQM8555) += tqm85xx.o -obj-$(CONFIG_TQM8560) += tqm85xx.o diff --git a/arch/ppc/platforms/85xx/mpc8540_ads.c b/arch/ppc/platforms/85xx/mpc8540_ads.c deleted file mode 100644 index 00a3ba57063f..000000000000 --- a/arch/ppc/platforms/85xx/mpc8540_ads.c +++ /dev/null @@ -1,226 +0,0 @@ -/* - * MPC8540ADS board specific routines - * - * Maintainer: Kumar Gala <galak@kernel.crashing.org> - * - * Copyright 2004 Freescale Semiconductor Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include <linux/stddef.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/errno.h> -#include <linux/reboot.h> -#include <linux/pci.h> -#include <linux/kdev_t.h> -#include <linux/major.h> -#include <linux/console.h> -#include <linux/delay.h> -#include <linux/seq_file.h> -#include <linux/root_dev.h> -#include <linux/serial.h> -#include <linux/tty.h> /* for linux/serial_core.h */ -#include <linux/serial_core.h> -#include <linux/initrd.h> -#include <linux/module.h> -#include <linux/fsl_devices.h> - -#include <asm/system.h> -#include <asm/pgtable.h> -#include <asm/page.h> -#include <asm/atomic.h> -#include <asm/time.h> -#include <asm/io.h> -#include <asm/machdep.h> -#include <asm/open_pic.h> -#include <asm/bootinfo.h> -#include <asm/pci-bridge.h> -#include <asm/mpc85xx.h> -#include <asm/irq.h> -#include <asm/immap_85xx.h> -#include <asm/kgdb.h> -#include <asm/ppc_sys.h> -#include <mm/mmu_decl.h> - -#include <syslib/ppc85xx_setup.h> - -/* ************************************************************************ - * - * Setup the architecture - * - */ -static void __init -mpc8540ads_setup_arch(void) -{ - bd_t *binfo = (bd_t *) __res; - unsigned int freq; - struct gianfar_platform_data *pdata; - struct gianfar_mdio_data *mdata; - - /* get the core frequency */ - freq = binfo->bi_intfreq; - - if (ppc_md.progress) - ppc_md.progress("mpc8540ads_setup_arch()", 0); - - /* Set loops_per_jiffy to a half-way reasonable value, - for use until calibrate_delay gets called. */ - loops_per_jiffy = freq / HZ; - -#ifdef CONFIG_PCI - /* setup PCI host bridges */ - mpc85xx_setup_hose(); -#endif - -#ifdef CONFIG_SERIAL_8250 - mpc85xx_early_serial_map(); -#endif - -#ifdef CONFIG_SERIAL_TEXT_DEBUG - /* Invalidate the entry we stole earlier the serial ports - * should be properly mapped */ - invalidate_tlbcam_entry(num_tlbcam_entries - 1); -#endif - - /* setup the board related info for the MDIO bus */ - mdata = (struct gianfar_mdio_data *) ppc_sys_get_pdata(MPC85xx_MDIO); - - mdata->irq[0] = MPC85xx_IRQ_EXT5; - mdata->irq[1] = MPC85xx_IRQ_EXT5; - mdata->irq[2] = PHY_POLL; - mdata->irq[3] = MPC85xx_IRQ_EXT5; - mdata->irq[31] = PHY_POLL; - - /* setup the board related information for the enet controllers */ - pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC1); - if (pdata) { - pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR; - pdata->bus_id = 0; - pdata->phy_id = 0; - memcpy(pdata->mac_addr, binfo->bi_enetaddr, 6); - } - - pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC2); - if (pdata) { - pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR; - pdata->bus_id = 0; - pdata->phy_id = 1; - memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6); - } - - pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_FEC); - if (pdata) { - pdata->board_flags = 0; - pdata->bus_id = 0; - pdata->phy_id = 3; - memcpy(pdata->mac_addr, binfo->bi_enet2addr, 6); - } - -#ifdef CONFIG_BLK_DEV_INITRD - if (initrd_start) - ROOT_DEV = Root_RAM0; - else -#endif -#ifdef CONFIG_ROOT_NFS - ROOT_DEV = Root_NFS; -#else - ROOT_DEV = Root_HDA1; -#endif -} - -/* ************************************************************************ */ -void __init -platform_init(unsigned long r3, unsigned long r4, unsigned long r5, - unsigned long r6, unsigned long r7) -{ - /* parse_bootinfo must always be called first */ - parse_bootinfo(find_bootinfo()); - - /* - * If we were passed in a board information, copy it into the - * residual data area. - */ - if (r3) { - memcpy((void *) __res, (void *) (r3 + KERNELBASE), - sizeof (bd_t)); - } -#ifdef CONFIG_SERIAL_TEXT_DEBUG - { - bd_t *binfo = (bd_t *) __res; - struct uart_port p; - - /* Use the last TLB entry to map CCSRBAR to allow access to DUART regs */ - settlbcam(num_tlbcam_entries - 1, binfo->bi_immr_base, - binfo->bi_immr_base, MPC85xx_CCSRBAR_SIZE, _PAGE_IO, 0); - - memset(&p, 0, sizeof (p)); - p.iotype = UPIO_MEM; - p.membase = (void *) binfo->bi_immr_base + MPC85xx_UART0_OFFSET; - p.uartclk = binfo->bi_busfreq; - - gen550_init(0, &p); - - memset(&p, 0, sizeof (p)); - p.iotype = UPIO_MEM; - p.membase = (void *) binfo->bi_immr_base + MPC85xx_UART1_OFFSET; - p.uartclk = binfo->bi_busfreq; - - gen550_init(1, &p); - } -#endif - -#if defined(CONFIG_BLK_DEV_INITRD) - /* - * If the init RAM disk has been configured in, and there's a valid - * starting address for it, set it up. - */ - if (r4) { - initrd_start = r4 + KERNELBASE; - initrd_end = r5 + KERNELBASE; - } -#endif /* CONFIG_BLK_DEV_INITRD */ - - /* Copy the kernel command line arguments to a safe place. */ - - if (r6) { - *(char *) (r7 + KERNELBASE) = 0; - strcpy(cmd_line, (char *) (r6 + KERNELBASE)); - } - - identify_ppc_sys_by_id(mfspr(SPRN_SVR)); - - /* setup the PowerPC module struct */ - ppc_md.setup_arch = mpc8540ads_setup_arch; - ppc_md.show_cpuinfo = mpc85xx_ads_show_cpuinfo; - - ppc_md.init_IRQ = mpc85xx_ads_init_IRQ; - ppc_md.get_irq = openpic_get_irq; - - ppc_md.restart = mpc85xx_restart; - ppc_md.power_off = mpc85xx_power_off; - ppc_md.halt = mpc85xx_halt; - - ppc_md.find_end_of_memory = mpc85xx_find_end_of_memory; - - ppc_md.time_init = NULL; - ppc_md.set_rtc_time = NULL; - ppc_md.get_rtc_time = NULL; - ppc_md.calibrate_decr = mpc85xx_calibrate_decr; - -#if defined(CONFIG_SERIAL_8250) && defined(CONFIG_SERIAL_TEXT_DEBUG) - ppc_md.progress = gen550_progress; -#endif /* CONFIG_SERIAL_8250 && CONFIG_SERIAL_TEXT_DEBUG */ -#if defined(CONFIG_SERIAL_8250) && defined(CONFIG_KGDB) - ppc_md.early_serial_map = mpc85xx_early_serial_map; -#endif /* CONFIG_SERIAL_8250 && CONFIG_KGDB */ - - if (ppc_md.progress) - ppc_md.progress("mpc8540ads_init(): exit", 0); - - return; -} diff --git a/arch/ppc/platforms/85xx/mpc8540_ads.h b/arch/ppc/platforms/85xx/mpc8540_ads.h deleted file mode 100644 index 7559f9e6fc28..000000000000 --- a/arch/ppc/platforms/85xx/mpc8540_ads.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * MPC8540ADS board definitions - * - * Maintainer: Kumar Gala <galak@kernel.crashing.org> - * - * Copyright 2004 Freescale Semiconductor Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -#ifndef __MACH_MPC8540ADS_H__ -#define __MACH_MPC8540ADS_H__ - -#include <linux/initrd.h> -#include <syslib/ppc85xx_setup.h> -#include <platforms/85xx/mpc85xx_ads_common.h> - -#endif /* __MACH_MPC8540ADS_H__ */ diff --git a/arch/ppc/platforms/85xx/mpc8555_cds.h b/arch/ppc/platforms/85xx/mpc8555_cds.h deleted file mode 100644 index 4f79c372c4e7..000000000000 --- a/arch/ppc/platforms/85xx/mpc8555_cds.h +++ /dev/null @@ -1,23 +0,0 @@ -/* - * MPC8555CDS board definitions - * - * Maintainer: Kumar Gala <galak@kernel.crashing.org> - * - * Copyright 2004 Freescale Semiconductor Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -#ifndef __MACH_MPC8555CDS_H__ -#define __MACH_MPC8555CDS_H__ - -#include <syslib/ppc85xx_setup.h> -#include <platforms/85xx/mpc85xx_cds_common.h> - -#define CPM_MAP_ADDR (CCSRBAR + MPC85xx_CPM_OFFSET) - -#endif /* __MACH_MPC8555CDS_H__ */ diff --git a/arch/ppc/platforms/85xx/mpc8560_ads.c b/arch/ppc/platforms/85xx/mpc8560_ads.c deleted file mode 100644 index 3a060468dd95..000000000000 --- a/arch/ppc/platforms/85xx/mpc8560_ads.c +++ /dev/null @@ -1,303 +0,0 @@ -/* - * MPC8560ADS board specific routines - * - * Maintainer: Kumar Gala <galak@kernel.crashing.org> - * - * Copyright 2004 Freescale Semiconductor Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include <linux/stddef.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/errno.h> -#include <linux/reboot.h> -#include <linux/pci.h> -#include <linux/kdev_t.h> -#include <linux/major.h> -#include <linux/console.h> -#include <linux/delay.h> -#include <linux/seq_file.h> -#include <linux/root_dev.h> -#include <linux/serial.h> -#include <linux/tty.h> /* for linux/serial_core.h */ -#include <linux/serial_core.h> -#include <linux/initrd.h> -#include <linux/module.h> -#include <linux/fsl_devices.h> -#include <linux/fs_enet_pd.h> - -#include <asm/system.h> -#include <asm/pgtable.h> -#include <asm/page.h> -#include <asm/atomic.h> -#include <asm/time.h> -#include <asm/io.h> -#include <asm/machdep.h> -#include <asm/open_pic.h> -#include <asm/bootinfo.h> -#include <asm/pci-bridge.h> -#include <asm/mpc85xx.h> -#include <asm/irq.h> -#include <asm/immap_85xx.h> -#include <asm/kgdb.h> -#include <asm/ppc_sys.h> -#include <asm/cpm2.h> -#include <mm/mmu_decl.h> - -#include <syslib/cpm2_pic.h> -#include <syslib/ppc85xx_common.h> -#include <syslib/ppc85xx_setup.h> - - -/* ************************************************************************ - * - * Setup the architecture - * - */ -static void init_fcc_ioports(void) -{ - struct immap *immap; - struct io_port *io; - u32 tempval; - - immap = cpm2_immr; - - io = &immap->im_ioport; - /* FCC2/3 are on the ports B/C. */ - tempval = in_be32(&io->iop_pdirb); - tempval &= ~PB2_DIRB0; - tempval |= PB2_DIRB1; - out_be32(&io->iop_pdirb, tempval); - - tempval = in_be32(&io->iop_psorb); - tempval &= ~PB2_PSORB0; - tempval |= PB2_PSORB1; - out_be32(&io->iop_psorb, tempval); - - tempval = in_be32(&io->iop_pparb); - tempval |= (PB2_DIRB0 | PB2_DIRB1); - out_be32(&io->iop_pparb, tempval); - - tempval = in_be32(&io->iop_pdirb); - tempval &= ~PB3_DIRB0; - tempval |= PB3_DIRB1; - out_be32(&io->iop_pdirb, tempval); - - tempval = in_be32(&io->iop_psorb); - tempval &= ~PB3_PSORB0; - tempval |= PB3_PSORB1; - out_be32(&io->iop_psorb, tempval); - - tempval = in_be32(&io->iop_pparb); - tempval |= (PB3_DIRB0 | PB3_DIRB1); - out_be32(&io->iop_pparb, tempval); - - tempval = in_be32(&io->iop_pdirc); - tempval |= PC3_DIRC1; - out_be32(&io->iop_pdirc, tempval); - - tempval = in_be32(&io->iop_pparc); - tempval |= PC3_DIRC1; - out_be32(&io->iop_pparc, tempval); - - /* Port C has clocks...... */ - tempval = in_be32(&io->iop_psorc); - tempval &= ~(CLK_TRX); - out_be32(&io->iop_psorc, tempval); - - tempval = in_be32(&io->iop_pdirc); - tempval &= ~(CLK_TRX); - out_be32(&io->iop_pdirc, tempval); - tempval = in_be32(&io->iop_pparc); - tempval |= (CLK_TRX); - out_be32(&io->iop_pparc, tempval); - - /* Configure Serial Interface clock routing. - * First, clear all FCC bits to zero, - * then set the ones we want. - */ - immap->im_cpmux.cmx_fcr &= ~(CPMUX_CLK_MASK); - immap->im_cpmux.cmx_fcr |= CPMUX_CLK_ROUTE; -} - -static void __init -mpc8560ads_setup_arch(void) -{ - bd_t *binfo = (bd_t *) __res; - unsigned int freq; - struct gianfar_platform_data *pdata; - struct gianfar_mdio_data *mdata; - struct fs_platform_info *fpi; - - cpm2_reset(); - - /* get the core frequency */ - freq = binfo->bi_intfreq; - - if (ppc_md.progress) - ppc_md.progress("mpc8560ads_setup_arch()", 0); - - /* Set loops_per_jiffy to a half-way reasonable value, - for use until calibrate_delay gets called. */ - loops_per_jiffy = freq / HZ; - -#ifdef CONFIG_PCI - /* setup PCI host bridges */ - mpc85xx_setup_hose(); -#endif - - /* setup the board related info for the MDIO bus */ - mdata = (struct gianfar_mdio_data *) ppc_sys_get_pdata(MPC85xx_MDIO); - - mdata->irq[0] = MPC85xx_IRQ_EXT5; - mdata->irq[1] = MPC85xx_IRQ_EXT5; - mdata->irq[2] = PHY_POLL; - mdata->irq[3] = MPC85xx_IRQ_EXT5; - mdata->irq[31] = PHY_POLL; - - /* setup the board related information for the enet controllers */ - pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC1); - if (pdata) { - pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR; - pdata->bus_id = 0; - pdata->phy_id = 0; - memcpy(pdata->mac_addr, binfo->bi_enetaddr, 6); - } - - pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC2); - if (pdata) { - pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR; - pdata->bus_id = 0; - pdata->phy_id = 1; - memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6); - } - - init_fcc_ioports(); - ppc_sys_device_remove(MPC85xx_CPM_FCC1); - - fpi = (struct fs_platform_info *) ppc_sys_get_pdata(MPC85xx_CPM_FCC2); - if (fpi) { - memcpy(fpi->macaddr, binfo->bi_enet2addr, 6); - fpi->bus_id = "0:02"; - fpi->phy_addr = 2; - fpi->dpram_offset = (u32)cpm2_immr->im_dprambase; - fpi->fcc_regs_c = (u32)&cpm2_immr->im_fcc_c[1]; - } - - fpi = (struct fs_platform_info *) ppc_sys_get_pdata(MPC85xx_CPM_FCC3); - if (fpi) { - memcpy(fpi->macaddr, binfo->bi_enet2addr, 6); - fpi->macaddr[5] += 1; - fpi->bus_id = "0:03"; - fpi->phy_addr = 3; - fpi->dpram_offset = (u32)cpm2_immr->im_dprambase; - fpi->fcc_regs_c = (u32)&cpm2_immr->im_fcc_c[2]; - } - -#ifdef CONFIG_BLK_DEV_INITRD - if (initrd_start) - ROOT_DEV = Root_RAM0; - else -#endif -#ifdef CONFIG_ROOT_NFS - ROOT_DEV = Root_NFS; -#else - ROOT_DEV = Root_HDA1; -#endif -} - -static irqreturn_t cpm2_cascade(int irq, void *dev_id) -{ - while ((irq = cpm2_get_irq()) >= 0) - __do_IRQ(irq); - return IRQ_HANDLED; -} - -static struct irqaction cpm2_irqaction = { - .handler = cpm2_cascade, - .flags = IRQF_DISABLED, - .mask = CPU_MASK_NONE, - .name = "cpm2_cascade", -}; - -static void __init -mpc8560_ads_init_IRQ(void) -{ - /* Setup OpenPIC */ - mpc85xx_ads_init_IRQ(); - - /* Setup CPM2 PIC */ - cpm2_init_IRQ(); - - setup_irq(MPC85xx_IRQ_CPM, &cpm2_irqaction); - - return; -} - - - -/* ************************************************************************ */ -void __init -platform_init(unsigned long r3, unsigned long r4, unsigned long r5, - unsigned long r6, unsigned long r7) -{ - /* parse_bootinfo must always be called first */ - parse_bootinfo(find_bootinfo()); - - /* - * If we were passed in a board information, copy it into the - * residual data area. - */ - if (r3) { - memcpy((void *) __res, (void *) (r3 + KERNELBASE), - sizeof (bd_t)); - - } -#if defined(CONFIG_BLK_DEV_INITRD) - /* - * If the init RAM disk has been configured in, and there's a valid - * starting address for it, set it up. - */ - if (r4) { - initrd_start = r4 + KERNELBASE; - initrd_end = r5 + KERNELBASE; - } -#endif /* CONFIG_BLK_DEV_INITRD */ - - /* Copy the kernel command line arguments to a safe place. */ - - if (r6) { - *(char *) (r7 + KERNELBASE) = 0; - strcpy(cmd_line, (char *) (r6 + KERNELBASE)); - } - - identify_ppc_sys_by_id(mfspr(SPRN_SVR)); - - /* setup the PowerPC module struct */ - ppc_md.setup_arch = mpc8560ads_setup_arch; - ppc_md.show_cpuinfo = mpc85xx_ads_show_cpuinfo; - - ppc_md.init_IRQ = mpc8560_ads_init_IRQ; - ppc_md.get_irq = openpic_get_irq; - - ppc_md.restart = mpc85xx_restart; - ppc_md.power_off = mpc85xx_power_off; - ppc_md.halt = mpc85xx_halt; - - ppc_md.find_end_of_memory = mpc85xx_find_end_of_memory; - - ppc_md.time_init = NULL; - ppc_md.set_rtc_time = NULL; - ppc_md.get_rtc_time = NULL; - ppc_md.calibrate_decr = mpc85xx_calibrate_decr; - - if (ppc_md.progress) - ppc_md.progress("mpc8560ads_init(): exit", 0); - - return; -} diff --git a/arch/ppc/platforms/85xx/mpc8560_ads.h b/arch/ppc/platforms/85xx/mpc8560_ads.h deleted file mode 100644 index 9f185ab2e019..000000000000 --- a/arch/ppc/platforms/85xx/mpc8560_ads.h +++ /dev/null @@ -1,24 +0,0 @@ -/* - * MPC8540ADS board definitions - * - * Maintainer: Kumar Gala <galak@kernel.crashing.org> - * - * Copyright 2004 Freescale Semiconductor Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -#ifndef __MACH_MPC8560ADS_H -#define __MACH_MPC8560ADS_H - -#include <syslib/ppc85xx_setup.h> -#include <platforms/85xx/mpc85xx_ads_common.h> - -#define CPM_MAP_ADDR (CCSRBAR + MPC85xx_CPM_OFFSET) -#define PHY_INTERRUPT MPC85xx_IRQ_EXT7 - -#endif /* __MACH_MPC8560ADS_H */ diff --git a/arch/ppc/platforms/85xx/mpc85xx_ads_common.c b/arch/ppc/platforms/85xx/mpc85xx_ads_common.c deleted file mode 100644 index 674806e001f6..000000000000 --- a/arch/ppc/platforms/85xx/mpc85xx_ads_common.c +++ /dev/null @@ -1,198 +0,0 @@ -/* - * MPC85xx ADS board common routines - * - * Maintainer: Kumar Gala <galak@kernel.crashing.org> - * - * Copyright 2004 Freescale Semiconductor Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include <linux/stddef.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/errno.h> -#include <linux/reboot.h> -#include <linux/pci.h> -#include <linux/kdev_t.h> -#include <linux/major.h> -#include <linux/console.h> -#include <linux/delay.h> -#include <linux/seq_file.h> -#include <linux/serial.h> -#include <linux/module.h> - -#include <asm/system.h> -#include <asm/pgtable.h> -#include <asm/page.h> -#include <asm/atomic.h> -#include <asm/time.h> -#include <asm/io.h> -#include <asm/machdep.h> -#include <asm/open_pic.h> -#include <asm/bootinfo.h> -#include <asm/pci-bridge.h> -#include <asm/mpc85xx.h> -#include <asm/irq.h> -#include <asm/immap_85xx.h> -#include <asm/ppc_sys.h> - -#include <mm/mmu_decl.h> - -#include <syslib/ppc85xx_rio.h> - -#include <platforms/85xx/mpc85xx_ads_common.h> - -#ifndef CONFIG_PCI -unsigned long isa_io_base = 0; -unsigned long isa_mem_base = 0; -#endif - -extern unsigned long total_memory; /* in mm/init */ - -unsigned char __res[sizeof (bd_t)]; - -/* Internal interrupts are all Level Sensitive, and Positive Polarity */ -static u_char mpc85xx_ads_openpic_initsenses[] __initdata = { - MPC85XX_INTERNAL_IRQ_SENSES, - 0x0, /* External 0: */ -#if defined(CONFIG_PCI) - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 1: PCI slot 0 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 2: PCI slot 1 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 3: PCI slot 2 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 4: PCI slot 3 */ -#else - 0x0, /* External 1: */ - 0x0, /* External 2: */ - 0x0, /* External 3: */ - 0x0, /* External 4: */ -#endif - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 5: PHY */ - 0x0, /* External 6: */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 7: PHY */ - 0x0, /* External 8: */ - 0x0, /* External 9: */ - 0x0, /* External 10: */ - 0x0, /* External 11: */ -}; - -/* ************************************************************************ */ -int -mpc85xx_ads_show_cpuinfo(struct seq_file *m) -{ - uint pvid, svid, phid1; - uint memsize = total_memory; - bd_t *binfo = (bd_t *) __res; - unsigned int freq; - - /* get the core frequency */ - freq = binfo->bi_intfreq; - - pvid = mfspr(SPRN_PVR); - svid = mfspr(SPRN_SVR); - - seq_printf(m, "Vendor\t\t: Freescale Semiconductor\n"); - seq_printf(m, "Machine\t\t: mpc%sads\n", cur_ppc_sys_spec->ppc_sys_name); - seq_printf(m, "clock\t\t: %dMHz\n", freq / 1000000); - seq_printf(m, "PVR\t\t: 0x%x\n", pvid); - seq_printf(m, "SVR\t\t: 0x%x\n", svid); - - /* Display cpu Pll setting */ - phid1 = mfspr(SPRN_HID1); - seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f)); - - /* Display the amount of memory */ - seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024)); - - return 0; -} - -void __init -mpc85xx_ads_init_IRQ(void) -{ - bd_t *binfo = (bd_t *) __res; - /* Determine the Physical Address of the OpenPIC regs */ - phys_addr_t OpenPIC_PAddr = - binfo->bi_immr_base + MPC85xx_OPENPIC_OFFSET; - OpenPIC_Addr = ioremap(OpenPIC_PAddr, MPC85xx_OPENPIC_SIZE); - OpenPIC_InitSenses = mpc85xx_ads_openpic_initsenses; - OpenPIC_NumInitSenses = sizeof (mpc85xx_ads_openpic_initsenses); - - /* Skip reserved space and internal sources */ - openpic_set_sources(0, 32, OpenPIC_Addr + 0x10200); - /* Map PIC IRQs 0-11 */ - openpic_set_sources(48, 12, OpenPIC_Addr + 0x10000); - - /* we let openpic interrupts starting from an offset, to - * leave space for cascading interrupts underneath. - */ - openpic_init(MPC85xx_OPENPIC_IRQ_OFFSET); - - return; -} - -#ifdef CONFIG_PCI -/* - * interrupt routing - */ - -int -mpc85xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) -{ - static char pci_irq_table[][4] = - /* - * This is little evil, but works around the fact - * that revA boards have IDSEL starting at 18 - * and others boards (older) start at 12 - * - * PCI IDSEL/INTPIN->INTLINE - * A B C D - */ - { - {PIRQA, PIRQB, PIRQC, PIRQD}, /* IDSEL 2 */ - {PIRQD, PIRQA, PIRQB, PIRQC}, - {PIRQC, PIRQD, PIRQA, PIRQB}, - {PIRQB, PIRQC, PIRQD, PIRQA}, /* IDSEL 5 */ - {0, 0, 0, 0}, /* -- */ - {0, 0, 0, 0}, /* -- */ - {0, 0, 0, 0}, /* -- */ - {0, 0, 0, 0}, /* -- */ - {0, 0, 0, 0}, /* -- */ - {0, 0, 0, 0}, /* -- */ - {PIRQA, PIRQB, PIRQC, PIRQD}, /* IDSEL 12 */ - {PIRQD, PIRQA, PIRQB, PIRQC}, - {PIRQC, PIRQD, PIRQA, PIRQB}, - {PIRQB, PIRQC, PIRQD, PIRQA}, /* IDSEL 15 */ - {0, 0, 0, 0}, /* -- */ - {0, 0, 0, 0}, /* -- */ - {PIRQA, PIRQB, PIRQC, PIRQD}, /* IDSEL 18 */ - {PIRQD, PIRQA, PIRQB, PIRQC}, - {PIRQC, PIRQD, PIRQA, PIRQB}, - {PIRQB, PIRQC, PIRQD, PIRQA}, /* IDSEL 21 */ - }; - - const long min_idsel = 2, max_idsel = 21, irqs_per_slot = 4; - return PCI_IRQ_TABLE_LOOKUP; -} - -int -mpc85xx_exclude_device(u_char bus, u_char devfn) -{ - if (bus == 0 && PCI_SLOT(devfn) == 0) - return PCIBIOS_DEVICE_NOT_FOUND; - else - return PCIBIOS_SUCCESSFUL; -} - -#endif /* CONFIG_PCI */ - -#ifdef CONFIG_RAPIDIO -void platform_rio_init(void) -{ - /* 512MB RIO LAW at 0xc0000000 */ - mpc85xx_rio_setup(0xc0000000, 0x20000000); -} -#endif /* CONFIG_RAPIDIO */ diff --git a/arch/ppc/platforms/85xx/mpc85xx_ads_common.h b/arch/ppc/platforms/85xx/mpc85xx_ads_common.h deleted file mode 100644 index c8c322fe3680..000000000000 --- a/arch/ppc/platforms/85xx/mpc85xx_ads_common.h +++ /dev/null @@ -1,67 +0,0 @@ -/* - * MPC85XX ADS common board definitions - * - * Maintainer: Kumar Gala <galak@kernel.crashing.org> - * - * Copyright 2004 Freescale Semiconductor Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -#ifndef __MACH_MPC85XX_ADS_H__ -#define __MACH_MPC85XX_ADS_H__ - -#include <linux/init.h> -#include <asm/ppcboot.h> - -#define BOARD_CCSRBAR ((uint)0xe0000000) -#define BCSR_ADDR ((uint)0xf8000000) -#define BCSR_SIZE ((uint)(32 * 1024)) - -struct seq_file; - -extern int mpc85xx_ads_show_cpuinfo(struct seq_file *m); -extern void mpc85xx_ads_init_IRQ(void) __init; -extern void mpc85xx_ads_map_io(void) __init; - -/* PCI interrupt controller */ -#define PIRQA MPC85xx_IRQ_EXT1 -#define PIRQB MPC85xx_IRQ_EXT2 -#define PIRQC MPC85xx_IRQ_EXT3 -#define PIRQD MPC85xx_IRQ_EXT4 - -#define MPC85XX_PCI1_LOWER_IO 0x00000000 -#define MPC85XX_PCI1_UPPER_IO 0x00ffffff - -#define MPC85XX_PCI1_LOWER_MEM 0x80000000 -#define MPC85XX_PCI1_UPPER_MEM 0x9fffffff - -#define MPC85XX_PCI1_IO_BASE 0xe2000000 -#define MPC85XX_PCI1_MEM_OFFSET 0x00000000 - -#define MPC85XX_PCI1_IO_SIZE 0x01000000 - -/* FCC1 Clock Source Configuration. These can be - * redefined in the board specific file. - * Can only choose from CLK9-12 */ -#define F1_RXCLK 12 -#define F1_TXCLK 11 - -/* FCC2 Clock Source Configuration. These can be - * redefined in the board specific file. - * Can only choose from CLK13-16 */ -#define F2_RXCLK 13 -#define F2_TXCLK 14 - -/* FCC3 Clock Source Configuration. These can be - * redefined in the board specific file. - * Can only choose from CLK13-16 */ -#define F3_RXCLK 15 -#define F3_TXCLK 16 - - -#endif /* __MACH_MPC85XX_ADS_H__ */ diff --git a/arch/ppc/platforms/85xx/mpc85xx_cds_common.c b/arch/ppc/platforms/85xx/mpc85xx_cds_common.c deleted file mode 100644 index 2d59eb776c95..000000000000 --- a/arch/ppc/platforms/85xx/mpc85xx_cds_common.c +++ /dev/null @@ -1,601 +0,0 @@ -/* - * MPC85xx CDS board specific routines - * - * Maintainer: Kumar Gala <galak@kernel.crashing.org> - * - * Copyright 2004 Freescale Semiconductor, Inc - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include <linux/stddef.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/errno.h> -#include <linux/reboot.h> -#include <linux/pci.h> -#include <linux/kdev_t.h> -#include <linux/major.h> -#include <linux/console.h> -#include <linux/delay.h> -#include <linux/seq_file.h> -#include <linux/serial.h> -#include <linux/module.h> -#include <linux/root_dev.h> -#include <linux/initrd.h> -#include <linux/tty.h> -#include <linux/serial_core.h> -#include <linux/fsl_devices.h> - -#include <asm/system.h> -#include <asm/pgtable.h> -#include <asm/page.h> -#include <asm/atomic.h> -#include <asm/time.h> -#include <asm/todc.h> -#include <asm/io.h> -#include <asm/machdep.h> -#include <asm/open_pic.h> -#include <asm/i8259.h> -#include <asm/bootinfo.h> -#include <asm/pci-bridge.h> -#include <asm/mpc85xx.h> -#include <asm/irq.h> -#include <asm/immap_85xx.h> -#include <asm/cpm2.h> -#include <asm/ppc_sys.h> -#include <asm/kgdb.h> - -#include <mm/mmu_decl.h> -#include <syslib/cpm2_pic.h> -#include <syslib/ppc85xx_common.h> -#include <syslib/ppc85xx_setup.h> - - -#ifndef CONFIG_PCI -unsigned long isa_io_base = 0; -unsigned long isa_mem_base = 0; -#endif - -extern unsigned long total_memory; /* in mm/init */ - -unsigned char __res[sizeof (bd_t)]; - -static int cds_pci_slot = 2; -static volatile u8 * cadmus; - -/* Internal interrupts are all Level Sensitive, and Positive Polarity */ -static u_char mpc85xx_cds_openpic_initsenses[] __initdata = { - MPC85XX_INTERNAL_IRQ_SENSES, -#if defined(CONFIG_PCI) - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 0: PCI1 slot */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 1: PCI1 slot */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 2: PCI1 slot */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 3: PCI1 slot */ -#else - 0x0, /* External 0: */ - 0x0, /* External 1: */ - 0x0, /* External 2: */ - 0x0, /* External 3: */ -#endif - 0x0, /* External 4: */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 5: PHY */ - 0x0, /* External 6: */ - 0x0, /* External 7: */ - 0x0, /* External 8: */ - 0x0, /* External 9: */ - 0x0, /* External 10: */ -#if defined(CONFIG_85xx_PCI2) && defined(CONFIG_PCI) - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 11: PCI2 slot 0 */ -#else - 0x0, /* External 11: */ -#endif -}; - -/* ************************************************************************ */ -int -mpc85xx_cds_show_cpuinfo(struct seq_file *m) -{ - uint pvid, svid, phid1; - uint memsize = total_memory; - bd_t *binfo = (bd_t *) __res; - unsigned int freq; - - /* get the core frequency */ - freq = binfo->bi_intfreq; - - pvid = mfspr(SPRN_PVR); - svid = mfspr(SPRN_SVR); - - seq_printf(m, "Vendor\t\t: Freescale Semiconductor\n"); - seq_printf(m, "Machine\t\t: CDS - MPC%s (%x)\n", cur_ppc_sys_spec->ppc_sys_name, cadmus[CM_VER]); - seq_printf(m, "clock\t\t: %dMHz\n", freq / 1000000); - seq_printf(m, "PVR\t\t: 0x%x\n", pvid); - seq_printf(m, "SVR\t\t: 0x%x\n", svid); - - /* Display cpu Pll setting */ - phid1 = mfspr(SPRN_HID1); - seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f)); - - /* Display the amount of memory */ - seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024)); - - return 0; -} - -#ifdef CONFIG_CPM2 -static irqreturn_t cpm2_cascade(int irq, void *dev_id) -{ - while((irq = cpm2_get_irq()) >= 0) - __do_IRQ(irq); - return IRQ_HANDLED; -} - -static struct irqaction cpm2_irqaction = { - .handler = cpm2_cascade, - .flags = IRQF_DISABLED, - .mask = CPU_MASK_NONE, - .name = "cpm2_cascade", -}; -#endif /* CONFIG_CPM2 */ - -void __init -mpc85xx_cds_init_IRQ(void) -{ - bd_t *binfo = (bd_t *) __res; - int i; - - /* Determine the Physical Address of the OpenPIC regs */ - phys_addr_t OpenPIC_PAddr = binfo->bi_immr_base + MPC85xx_OPENPIC_OFFSET; - OpenPIC_Addr = ioremap(OpenPIC_PAddr, MPC85xx_OPENPIC_SIZE); - OpenPIC_InitSenses = mpc85xx_cds_openpic_initsenses; - OpenPIC_NumInitSenses = sizeof (mpc85xx_cds_openpic_initsenses); - - /* Skip reserved space and internal sources */ -#ifdef CONFIG_MPC8548 - openpic_set_sources(0, 48, OpenPIC_Addr + 0x10200); -#else - openpic_set_sources(0, 32, OpenPIC_Addr + 0x10200); -#endif - /* Map PIC IRQs 0-11 */ - openpic_set_sources(48, 12, OpenPIC_Addr + 0x10000); - - /* we let openpic interrupts starting from an offset, to - * leave space for cascading interrupts underneath. - */ - openpic_init(MPC85xx_OPENPIC_IRQ_OFFSET); - -#ifdef CONFIG_PCI - openpic_hookup_cascade(PIRQ0A, "82c59 cascade", i8259_irq); - - i8259_init(0, 0); -#endif - -#ifdef CONFIG_CPM2 - /* Setup CPM2 PIC */ - cpm2_init_IRQ(); - - setup_irq(MPC85xx_IRQ_CPM, &cpm2_irqaction); -#endif - - return; -} - -#ifdef CONFIG_PCI -/* - * interrupt routing - */ -int -mpc85xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) -{ - struct pci_controller *hose = pci_bus_to_hose(dev->bus->number); - - if (!hose->index) - { - /* Handle PCI1 interrupts */ - char pci_irq_table[][4] = - /* - * PCI IDSEL/INTPIN->INTLINE - * A B C D - */ - - /* Note IRQ assignment for slots is based on which slot the elysium is - * in -- in this setup elysium is in slot #2 (this PIRQA as first - * interrupt on slot */ - { - { 0, 1, 2, 3 }, /* 16 - PMC */ - { 0, 1, 2, 3 }, /* 17 P2P (Tsi320) */ - { 0, 1, 2, 3 }, /* 18 - Slot 1 */ - { 1, 2, 3, 0 }, /* 19 - Slot 2 */ - { 2, 3, 0, 1 }, /* 20 - Slot 3 */ - { 3, 0, 1, 2 }, /* 21 - Slot 4 */ - }; - - const long min_idsel = 16, max_idsel = 21, irqs_per_slot = 4; - int i, j; - - for (i = 0; i < 6; i++) - for (j = 0; j < 4; j++) - pci_irq_table[i][j] = - ((pci_irq_table[i][j] + 5 - - cds_pci_slot) & 0x3) + PIRQ0A; - - return PCI_IRQ_TABLE_LOOKUP; - } else { - /* Handle PCI2 interrupts (if we have one) */ - char pci_irq_table[][4] = - { - /* - * We only have one slot and one interrupt - * going to PIRQA - PIRQD */ - { PIRQ1A, PIRQ1A, PIRQ1A, PIRQ1A }, /* 21 - slot 0 */ - }; - - const long min_idsel = 21, max_idsel = 21, irqs_per_slot = 4; - - return PCI_IRQ_TABLE_LOOKUP; - } -} - -#define ARCADIA_HOST_BRIDGE_IDSEL 17 -#define ARCADIA_2ND_BRIDGE_IDSEL 3 - -extern int mpc85xx_pci1_last_busno; - -int -mpc85xx_exclude_device(u_char bus, u_char devfn) -{ - if (bus == 0 && PCI_SLOT(devfn) == 0) - return PCIBIOS_DEVICE_NOT_FOUND; -#ifdef CONFIG_85xx_PCI2 - if (mpc85xx_pci1_last_busno) - if (bus == (mpc85xx_pci1_last_busno + 1) && PCI_SLOT(devfn) == 0) - return PCIBIOS_DEVICE_NOT_FOUND; -#endif - /* We explicitly do not go past the Tundra 320 Bridge */ - if ((bus == 1) && (PCI_SLOT(devfn) == ARCADIA_2ND_BRIDGE_IDSEL)) - return PCIBIOS_DEVICE_NOT_FOUND; - if ((bus == 0) && (PCI_SLOT(devfn) == ARCADIA_2ND_BRIDGE_IDSEL)) - return PCIBIOS_DEVICE_NOT_FOUND; - else - return PCIBIOS_SUCCESSFUL; -} - -void __init -mpc85xx_cds_enable_via(struct pci_controller *hose) -{ - u32 pci_class; - u16 vid, did; - - early_read_config_dword(hose, 0, 0x88, PCI_CLASS_REVISION, &pci_class); - if ((pci_class >> 16) != PCI_CLASS_BRIDGE_PCI) - return; - - /* Configure P2P so that we can reach bus 1 */ - early_write_config_byte(hose, 0, 0x88, PCI_PRIMARY_BUS, 0); - early_write_config_byte(hose, 0, 0x88, PCI_SECONDARY_BUS, 1); - early_write_config_byte(hose, 0, 0x88, PCI_SUBORDINATE_BUS, 0xff); - - early_read_config_word(hose, 1, 0x10, PCI_VENDOR_ID, &vid); - early_read_config_word(hose, 1, 0x10, PCI_DEVICE_ID, &did); - - if ((vid != PCI_VENDOR_ID_VIA) || - (did != PCI_DEVICE_ID_VIA_82C686)) - return; - - /* Enable USB and IDE functions */ - early_write_config_byte(hose, 1, 0x10, 0x48, 0x08); -} - -void __init -mpc85xx_cds_fixup_via(struct pci_controller *hose) -{ - u32 pci_class; - u16 vid, did; - - early_read_config_dword(hose, 0, 0x88, PCI_CLASS_REVISION, &pci_class); - if ((pci_class >> 16) != PCI_CLASS_BRIDGE_PCI) - return; - - /* - * Force the backplane P2P bridge to have a window - * open from 0x00000000-0x00001fff in PCI I/O space. - * This allows legacy I/O (i8259, etc) on the VIA - * southbridge to be accessed. - */ - early_write_config_byte(hose, 0, 0x88, PCI_IO_BASE, 0x00); - early_write_config_word(hose, 0, 0x88, PCI_IO_BASE_UPPER16, 0x0000); - early_write_config_byte(hose, 0, 0x88, PCI_IO_LIMIT, 0x10); - early_write_config_word(hose, 0, 0x88, PCI_IO_LIMIT_UPPER16, 0x0000); - - early_read_config_word(hose, 1, 0x10, PCI_VENDOR_ID, &vid); - early_read_config_word(hose, 1, 0x10, PCI_DEVICE_ID, &did); - if ((vid != PCI_VENDOR_ID_VIA) || - (did != PCI_DEVICE_ID_VIA_82C686)) - return; - - /* - * Since the P2P window was forced to cover the fixed - * legacy I/O addresses, it is necessary to manually - * place the base addresses for the IDE and USB functions - * within this window. - */ - /* Function 1, IDE */ - early_write_config_dword(hose, 1, 0x11, PCI_BASE_ADDRESS_0, 0x1ff8); - early_write_config_dword(hose, 1, 0x11, PCI_BASE_ADDRESS_1, 0x1ff4); - early_write_config_dword(hose, 1, 0x11, PCI_BASE_ADDRESS_2, 0x1fe8); - early_write_config_dword(hose, 1, 0x11, PCI_BASE_ADDRESS_3, 0x1fe4); - early_write_config_dword(hose, 1, 0x11, PCI_BASE_ADDRESS_4, 0x1fd0); - - /* Function 2, USB ports 0-1 */ - early_write_config_dword(hose, 1, 0x12, PCI_BASE_ADDRESS_4, 0x1fa0); - - /* Function 3, USB ports 2-3 */ - early_write_config_dword(hose, 1, 0x13, PCI_BASE_ADDRESS_4, 0x1f80); - - /* Function 5, Power Management */ - early_write_config_dword(hose, 1, 0x15, PCI_BASE_ADDRESS_0, 0x1e00); - early_write_config_dword(hose, 1, 0x15, PCI_BASE_ADDRESS_1, 0x1dfc); - early_write_config_dword(hose, 1, 0x15, PCI_BASE_ADDRESS_2, 0x1df8); - - /* Function 6, AC97 Interface */ - early_write_config_dword(hose, 1, 0x16, PCI_BASE_ADDRESS_0, 0x1c00); -} - -void __init -mpc85xx_cds_pcibios_fixup(void) -{ - struct pci_dev *dev; - u_char c; - - if ((dev = pci_get_device(PCI_VENDOR_ID_VIA, - PCI_DEVICE_ID_VIA_82C586_1, NULL))) { - /* - * U-Boot does not set the enable bits - * for the IDE device. Force them on here. - */ - pci_read_config_byte(dev, 0x40, &c); - c |= 0x03; /* IDE: Chip Enable Bits */ - pci_write_config_byte(dev, 0x40, c); - - /* - * Since only primary interface works, force the - * IDE function to standard primary IDE interrupt - * w/ 8259 offset - */ - dev->irq = 14; - pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); - pci_dev_put(dev); - } - - /* - * Force legacy USB interrupt routing - */ - if ((dev = pci_get_device(PCI_VENDOR_ID_VIA, - PCI_DEVICE_ID_VIA_82C586_2, NULL))) { - dev->irq = 10; - pci_write_config_byte(dev, PCI_INTERRUPT_LINE, 10); - - if ((dev = pci_get_device(PCI_VENDOR_ID_VIA, - PCI_DEVICE_ID_VIA_82C586_2, dev))) { - dev->irq = 11; - pci_write_config_byte(dev, PCI_INTERRUPT_LINE, 11); - } - pci_dev_put(dev); - } -} -#endif /* CONFIG_PCI */ - -TODC_ALLOC(); - -/* ************************************************************************ - * - * Setup the architecture - * - */ -static void __init -mpc85xx_cds_setup_arch(void) -{ - bd_t *binfo = (bd_t *) __res; - unsigned int freq; - struct gianfar_platform_data *pdata; - struct gianfar_mdio_data *mdata; - - /* get the core frequency */ - freq = binfo->bi_intfreq; - - printk("mpc85xx_cds_setup_arch\n"); - -#ifdef CONFIG_CPM2 - cpm2_reset(); -#endif - - cadmus = ioremap(CADMUS_BASE, CADMUS_SIZE); - cds_pci_slot = ((cadmus[CM_CSR] >> 6) & 0x3) + 1; - printk("CDS Version = %x in PCI slot %d\n", cadmus[CM_VER], cds_pci_slot); - - /* Setup TODC access */ - TODC_INIT(TODC_TYPE_DS1743, - 0, - 0, - ioremap(CDS_RTC_ADDR, CDS_RTC_SIZE), - 8); - - /* Set loops_per_jiffy to a half-way reasonable value, - for use until calibrate_delay gets called. */ - loops_per_jiffy = freq / HZ; - -#ifdef CONFIG_PCI - /* VIA IDE configuration */ - ppc_md.pcibios_fixup = mpc85xx_cds_pcibios_fixup; - - /* setup PCI host bridges */ - mpc85xx_setup_hose(); -#endif - -#ifdef CONFIG_SERIAL_8250 - mpc85xx_early_serial_map(); -#endif - -#ifdef CONFIG_SERIAL_TEXT_DEBUG - /* Invalidate the entry we stole earlier the serial ports - * should be properly mapped */ - invalidate_tlbcam_entry(num_tlbcam_entries - 1); -#endif - - /* setup the board related info for the MDIO bus */ - mdata = (struct gianfar_mdio_data *) ppc_sys_get_pdata(MPC85xx_MDIO); - - mdata->irq[0] = MPC85xx_IRQ_EXT5; - mdata->irq[1] = MPC85xx_IRQ_EXT5; - mdata->irq[2] = PHY_POLL; - mdata->irq[3] = PHY_POLL; - mdata->irq[31] = PHY_POLL; - - /* setup the board related information for the enet controllers */ - pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC1); - if (pdata) { - pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR; - pdata->bus_id = 0; - pdata->phy_id = 0; - memcpy(pdata->mac_addr, binfo->bi_enetaddr, 6); - } - - pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC2); - if (pdata) { - pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR; - pdata->bus_id = 0; - pdata->phy_id = 1; - memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6); - } - - pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_eTSEC1); - if (pdata) { - pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR; - pdata->bus_id = 0; - pdata->phy_id = 0; - memcpy(pdata->mac_addr, binfo->bi_enetaddr, 6); - } - - pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_eTSEC2); - if (pdata) { - pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR; - pdata->bus_id = 0; - pdata->phy_id = 1; - memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6); - } - - ppc_sys_device_remove(MPC85xx_eTSEC3); - ppc_sys_device_remove(MPC85xx_eTSEC4); - -#ifdef CONFIG_BLK_DEV_INITRD - if (initrd_start) - ROOT_DEV = Root_RAM0; - else -#endif -#ifdef CONFIG_ROOT_NFS - ROOT_DEV = Root_NFS; -#else - ROOT_DEV = Root_HDA1; -#endif -} - -/* ************************************************************************ */ -void __init -platform_init(unsigned long r3, unsigned long r4, unsigned long r5, - unsigned long r6, unsigned long r7) -{ - /* parse_bootinfo must always be called first */ - parse_bootinfo(find_bootinfo()); - - /* - * If we were passed in a board information, copy it into the - * residual data area. - */ - if (r3) { - memcpy((void *) __res, (void *) (r3 + KERNELBASE), - sizeof (bd_t)); - - } -#ifdef CONFIG_SERIAL_TEXT_DEBUG - { - bd_t *binfo = (bd_t *) __res; - struct uart_port p; - - /* Use the last TLB entry to map CCSRBAR to allow access to DUART regs */ - settlbcam(num_tlbcam_entries - 1, binfo->bi_immr_base, - binfo->bi_immr_base, MPC85xx_CCSRBAR_SIZE, _PAGE_IO, 0); - - memset(&p, 0, sizeof (p)); - p.iotype = UPIO_MEM; - p.membase = (void *) binfo->bi_immr_base + MPC85xx_UART0_OFFSET; - p.uartclk = binfo->bi_busfreq; - - gen550_init(0, &p); - - memset(&p, 0, sizeof (p)); - p.iotype = UPIO_MEM; - p.membase = (void *) binfo->bi_immr_base + MPC85xx_UART1_OFFSET; - p.uartclk = binfo->bi_busfreq; - - gen550_init(1, &p); - } -#endif - -#if defined(CONFIG_BLK_DEV_INITRD) - /* - * If the init RAM disk has been configured in, and there's a valid - * starting address for it, set it up. - */ - if (r4) { - initrd_start = r4 + KERNELBASE; - initrd_end = r5 + KERNELBASE; - } -#endif /* CONFIG_BLK_DEV_INITRD */ - - /* Copy the kernel command line arguments to a safe place. */ - - if (r6) { - *(char *) (r7 + KERNELBASE) = 0; - strcpy(cmd_line, (char *) (r6 + KERNELBASE)); - } - - identify_ppc_sys_by_id(mfspr(SPRN_SVR)); - - /* setup the PowerPC module struct */ - ppc_md.setup_arch = mpc85xx_cds_setup_arch; - ppc_md.show_cpuinfo = mpc85xx_cds_show_cpuinfo; - - ppc_md.init_IRQ = mpc85xx_cds_init_IRQ; - ppc_md.get_irq = openpic_get_irq; - - ppc_md.restart = mpc85xx_restart; - ppc_md.power_off = mpc85xx_power_off; - ppc_md.halt = mpc85xx_halt; - - ppc_md.find_end_of_memory = mpc85xx_find_end_of_memory; - - ppc_md.calibrate_decr = mpc85xx_calibrate_decr; - - ppc_md.time_init = todc_time_init; - ppc_md.set_rtc_time = todc_set_rtc_time; - ppc_md.get_rtc_time = todc_get_rtc_time; - - ppc_md.nvram_read_val = todc_direct_read_val; - ppc_md.nvram_write_val = todc_direct_write_val; - -#if defined(CONFIG_SERIAL_8250) && defined(CONFIG_SERIAL_TEXT_DEBUG) - ppc_md.progress = gen550_progress; -#endif /* CONFIG_SERIAL_8250 && CONFIG_SERIAL_TEXT_DEBUG */ -#if defined(CONFIG_SERIAL_8250) && defined(CONFIG_KGDB) - ppc_md.early_serial_map = mpc85xx_early_serial_map; -#endif /* CONFIG_SERIAL_8250 && CONFIG_KGDB */ - - if (ppc_md.progress) - ppc_md.progress("mpc85xx_cds_init(): exit", 0); - - return; -} diff --git a/arch/ppc/platforms/85xx/mpc85xx_cds_common.h b/arch/ppc/platforms/85xx/mpc85xx_cds_common.h deleted file mode 100644 index 32c5455c8b82..000000000000 --- a/arch/ppc/platforms/85xx/mpc85xx_cds_common.h +++ /dev/null @@ -1,80 +0,0 @@ -/* - * MPC85xx CDS board definitions - * - * Maintainer: Kumar Gala <galak@kernel.crashing.org> - * - * Copyright 2004 Freescale Semiconductor, Inc - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -#ifndef __MACH_MPC85XX_CDS_H__ -#define __MACH_MPC85XX_CDS_H__ - -#include <linux/serial.h> -#include <asm/ppcboot.h> -#include <linux/initrd.h> -#include <syslib/ppc85xx_setup.h> - -#define BOARD_CCSRBAR ((uint)0xe0000000) -#define CCSRBAR_SIZE ((uint)1024*1024) - -/* CADMUS info */ -#define CADMUS_BASE (0xf8004000) -#define CADMUS_SIZE (256) -#define CM_VER (0) -#define CM_CSR (1) -#define CM_RST (2) - -/* CDS NVRAM/RTC */ -#define CDS_RTC_ADDR (0xf8000000) -#define CDS_RTC_SIZE (8 * 1024) - -/* PCI config */ -#define PCI1_CFG_ADDR_OFFSET (0x8000) -#define PCI1_CFG_DATA_OFFSET (0x8004) - -#define PCI2_CFG_ADDR_OFFSET (0x9000) -#define PCI2_CFG_DATA_OFFSET (0x9004) - -/* PCI interrupt controller */ -#define PIRQ0A MPC85xx_IRQ_EXT0 -#define PIRQ0B MPC85xx_IRQ_EXT1 -#define PIRQ0C MPC85xx_IRQ_EXT2 -#define PIRQ0D MPC85xx_IRQ_EXT3 -#define PIRQ1A MPC85xx_IRQ_EXT11 - -/* PCI 1 memory map */ -#define MPC85XX_PCI1_LOWER_IO 0x00000000 -#define MPC85XX_PCI1_UPPER_IO 0x00ffffff - -#define MPC85XX_PCI1_LOWER_MEM 0x80000000 -#define MPC85XX_PCI1_UPPER_MEM 0x9fffffff - -#define MPC85XX_PCI1_IO_BASE 0xe2000000 -#define MPC85XX_PCI1_MEM_OFFSET 0x00000000 - -#define MPC85XX_PCI1_IO_SIZE 0x01000000 - -/* PCI 2 memory map */ -/* Note: the standard PPC fixups will cause IO space to get bumped by - * hose->io_base_virt - isa_io_base => MPC85XX_PCI1_IO_SIZE */ -#define MPC85XX_PCI2_LOWER_IO 0x00000000 -#define MPC85XX_PCI2_UPPER_IO 0x00ffffff - -#define MPC85XX_PCI2_LOWER_MEM 0xa0000000 -#define MPC85XX_PCI2_UPPER_MEM 0xbfffffff - -#define MPC85XX_PCI2_IO_BASE 0xe3000000 -#define MPC85XX_PCI2_MEM_OFFSET 0x00000000 - -#define MPC85XX_PCI2_IO_SIZE 0x01000000 - -#define NR_8259_INTS 16 -#define CPM_IRQ_OFFSET NR_8259_INTS - -#endif /* __MACH_MPC85XX_CDS_H__ */ diff --git a/arch/ppc/platforms/85xx/sbc8560.c b/arch/ppc/platforms/85xx/sbc8560.c deleted file mode 100644 index 3d7addbdecfd..000000000000 --- a/arch/ppc/platforms/85xx/sbc8560.c +++ /dev/null @@ -1,234 +0,0 @@ -/* - * Wind River SBC8560 board specific routines - * - * Maintainer: Kumar Gala - * - * Copyright 2004 Freescale Semiconductor Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include <linux/stddef.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/errno.h> -#include <linux/reboot.h> -#include <linux/pci.h> -#include <linux/kdev_t.h> -#include <linux/major.h> -#include <linux/console.h> -#include <linux/delay.h> -#include <linux/seq_file.h> -#include <linux/root_dev.h> -#include <linux/serial.h> -#include <linux/tty.h> /* for linux/serial_core.h */ -#include <linux/serial_core.h> -#include <linux/serial_8250.h> -#include <linux/initrd.h> -#include <linux/module.h> -#include <linux/fsl_devices.h> - -#include <asm/system.h> -#include <asm/pgtable.h> -#include <asm/page.h> -#include <asm/atomic.h> -#include <asm/time.h> -#include <asm/io.h> -#include <asm/machdep.h> -#include <asm/open_pic.h> -#include <asm/bootinfo.h> -#include <asm/pci-bridge.h> -#include <asm/mpc85xx.h> -#include <asm/irq.h> -#include <asm/immap_85xx.h> -#include <asm/kgdb.h> -#include <asm/ppc_sys.h> -#include <mm/mmu_decl.h> - -#include <syslib/ppc85xx_common.h> -#include <syslib/ppc85xx_setup.h> - -#ifdef CONFIG_SERIAL_8250 -static void __init -sbc8560_early_serial_map(void) -{ - struct uart_port uart_req; - - /* Setup serial port access */ - memset(&uart_req, 0, sizeof (uart_req)); - uart_req.irq = MPC85xx_IRQ_EXT9; - uart_req.flags = STD_COM_FLAGS; - uart_req.uartclk = BASE_BAUD * 16; - uart_req.iotype = UPIO_MEM; - uart_req.mapbase = UARTA_ADDR; - uart_req.membase = ioremap(uart_req.mapbase, MPC85xx_UART0_SIZE); - uart_req.type = PORT_16650; - -#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB) - gen550_init(0, &uart_req); -#endif - - if (early_serial_setup(&uart_req) != 0) - printk("Early serial init of port 0 failed\n"); - - /* Assume early_serial_setup() doesn't modify uart_req */ - uart_req.line = 1; - uart_req.mapbase = UARTB_ADDR; - uart_req.membase = ioremap(uart_req.mapbase, MPC85xx_UART1_SIZE); - uart_req.irq = MPC85xx_IRQ_EXT10; - -#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB) - gen550_init(1, &uart_req); -#endif - - if (early_serial_setup(&uart_req) != 0) - printk("Early serial init of port 1 failed\n"); -} -#endif - -/* ************************************************************************ - * - * Setup the architecture - * - */ -static void __init -sbc8560_setup_arch(void) -{ - bd_t *binfo = (bd_t *) __res; - unsigned int freq; - struct gianfar_platform_data *pdata; - struct gianfar_mdio_data *mdata; - - /* get the core frequency */ - freq = binfo->bi_intfreq; - - if (ppc_md.progress) - ppc_md.progress("sbc8560_setup_arch()", 0); - - /* Set loops_per_jiffy to a half-way reasonable value, - for use until calibrate_delay gets called. */ - loops_per_jiffy = freq / HZ; - -#ifdef CONFIG_PCI - /* setup PCI host bridges */ - mpc85xx_setup_hose(); -#endif -#ifdef CONFIG_SERIAL_8250 - sbc8560_early_serial_map(); -#endif -#ifdef CONFIG_SERIAL_TEXT_DEBUG - /* Invalidate the entry we stole earlier the serial ports - * should be properly mapped */ - invalidate_tlbcam_entry(num_tlbcam_entries - 1); -#endif - - /* setup the board related info for the MDIO bus */ - mdata = (struct gianfar_mdio_data *) ppc_sys_get_pdata(MPC85xx_MDIO); - - mdata->irq[25] = MPC85xx_IRQ_EXT6; - mdata->irq[26] = MPC85xx_IRQ_EXT7; - mdata->irq[31] = PHY_POLL; - - /* setup the board related information for the enet controllers */ - pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC1); - if (pdata) { - pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR; - pdata->bus_id = 0; - pdata->phy_id = 25; - memcpy(pdata->mac_addr, binfo->bi_enetaddr, 6); - } - - pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC2); - if (pdata) { - pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR; - pdata->bus_id = 0; - pdata->phy_id = 26; - memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6); - } - -#ifdef CONFIG_BLK_DEV_INITRD - if (initrd_start) - ROOT_DEV = Root_RAM0; - else -#endif -#ifdef CONFIG_ROOT_NFS - ROOT_DEV = Root_NFS; -#else - ROOT_DEV = Root_HDA1; -#endif -} - -/* ************************************************************************ */ -void __init -platform_init(unsigned long r3, unsigned long r4, unsigned long r5, - unsigned long r6, unsigned long r7) -{ - /* parse_bootinfo must always be called first */ - parse_bootinfo(find_bootinfo()); - - /* - * If we were passed in a board information, copy it into the - * residual data area. - */ - if (r3) { - memcpy((void *) __res, (void *) (r3 + KERNELBASE), - sizeof (bd_t)); - } - -#ifdef CONFIG_SERIAL_TEXT_DEBUG - /* Use the last TLB entry to map CCSRBAR to allow access to DUART regs */ - settlbcam(num_tlbcam_entries - 1, UARTA_ADDR, - UARTA_ADDR, 0x1000, _PAGE_IO, 0); -#endif - -#if defined(CONFIG_BLK_DEV_INITRD) - /* - * If the init RAM disk has been configured in, and there's a valid - * starting address for it, set it up. - */ - if (r4) { - initrd_start = r4 + KERNELBASE; - initrd_end = r5 + KERNELBASE; - } -#endif /* CONFIG_BLK_DEV_INITRD */ - - /* Copy the kernel command line arguments to a safe place. */ - - if (r6) { - *(char *) (r7 + KERNELBASE) = 0; - strcpy(cmd_line, (char *) (r6 + KERNELBASE)); - } - - identify_ppc_sys_by_id(mfspr(SPRN_SVR)); - - /* setup the PowerPC module struct */ - ppc_md.setup_arch = sbc8560_setup_arch; - ppc_md.show_cpuinfo = sbc8560_show_cpuinfo; - - ppc_md.init_IRQ = sbc8560_init_IRQ; - ppc_md.get_irq = openpic_get_irq; - - ppc_md.restart = mpc85xx_restart; - ppc_md.power_off = mpc85xx_power_off; - ppc_md.halt = mpc85xx_halt; - - ppc_md.find_end_of_memory = mpc85xx_find_end_of_memory; - - ppc_md.time_init = NULL; - ppc_md.set_rtc_time = NULL; - ppc_md.get_rtc_time = NULL; - ppc_md.calibrate_decr = mpc85xx_calibrate_decr; - -#if defined(CONFIG_SERIAL_8250) && defined(CONFIG_SERIAL_TEXT_DEBUG) - ppc_md.progress = gen550_progress; -#endif /* CONFIG_SERIAL_8250 && CONFIG_SERIAL_TEXT_DEBUG */ -#if defined(CONFIG_SERIAL_8250) && defined(CONFIG_KGDB) - ppc_md.early_serial_map = sbc8560_early_serial_map; -#endif /* CONFIG_SERIAL_8250 && CONFIG_KGDB */ - - if (ppc_md.progress) - ppc_md.progress("sbc8560_init(): exit", 0); -} diff --git a/arch/ppc/platforms/85xx/sbc8560.h b/arch/ppc/platforms/85xx/sbc8560.h deleted file mode 100644 index e5e156f60100..000000000000 --- a/arch/ppc/platforms/85xx/sbc8560.h +++ /dev/null @@ -1,47 +0,0 @@ -/* - * Wind River SBC8560 board definitions - * - * Copyright 2003 Motorola Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -#ifndef __MACH_SBC8560_H__ -#define __MACH_SBC8560_H__ - -#include <platforms/85xx/sbc85xx.h> -#include <asm/irq.h> - -#define CPM_MAP_ADDR (CCSRBAR + MPC85xx_CPM_OFFSET) - -#ifdef CONFIG_SERIAL_MANY_PORTS -#define RS_TABLE_SIZE 64 -#else -#define RS_TABLE_SIZE 2 -#endif - -/* Rate for the 1.8432 Mhz clock for the onboard serial chip */ -#define BASE_BAUD ( 1843200 / 16 ) - -#ifdef CONFIG_SERIAL_DETECT_IRQ -#define STD_COM_FLAGS (ASYNC_SKIP_TEST|ASYNC_AUTO_IRQ) -#else -#define STD_COM_FLAGS (ASYNC_SKIP_TEST) -#endif - -#define STD_SERIAL_PORT_DFNS \ - { 0, BASE_BAUD, UARTA_ADDR, MPC85xx_IRQ_EXT9, STD_COM_FLAGS, /* ttyS0 */ \ - iomem_base: (u8 *)UARTA_ADDR, \ - io_type: SERIAL_IO_MEM }, \ - { 0, BASE_BAUD, UARTB_ADDR, MPC85xx_IRQ_EXT10, STD_COM_FLAGS, /* ttyS1 */ \ - iomem_base: (u8 *)UARTB_ADDR, \ - io_type: SERIAL_IO_MEM }, - -#define SERIAL_PORT_DFNS \ - STD_SERIAL_PORT_DFNS - -#endif /* __MACH_SBC8560_H__ */ diff --git a/arch/ppc/platforms/85xx/sbc85xx.c b/arch/ppc/platforms/85xx/sbc85xx.c deleted file mode 100644 index 2c587ca97bce..000000000000 --- a/arch/ppc/platforms/85xx/sbc85xx.c +++ /dev/null @@ -1,166 +0,0 @@ -/* - * WindRiver PowerQUICC III SBC85xx board common routines - * - * Copyright 2002, 2003 Motorola Inc. - * Copyright 2004 Red Hat, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include <linux/stddef.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/errno.h> -#include <linux/reboot.h> -#include <linux/pci.h> -#include <linux/kdev_t.h> -#include <linux/major.h> -#include <linux/console.h> -#include <linux/delay.h> -#include <linux/seq_file.h> -#include <linux/serial.h> -#include <linux/module.h> - -#include <asm/system.h> -#include <asm/pgtable.h> -#include <asm/page.h> -#include <asm/atomic.h> -#include <asm/time.h> -#include <asm/io.h> -#include <asm/machdep.h> -#include <asm/open_pic.h> -#include <asm/bootinfo.h> -#include <asm/pci-bridge.h> -#include <asm/mpc85xx.h> -#include <asm/irq.h> -#include <asm/immap_85xx.h> -#include <asm/ppc_sys.h> - -#include <mm/mmu_decl.h> - -#include <platforms/85xx/sbc85xx.h> - -unsigned char __res[sizeof (bd_t)]; - -#ifndef CONFIG_PCI -unsigned long isa_io_base = 0; -unsigned long isa_mem_base = 0; -unsigned long pci_dram_offset = 0; -#endif - -extern unsigned long total_memory; /* in mm/init */ - -/* Internal interrupts are all Level Sensitive, and Positive Polarity */ -static u_char sbc8560_openpic_initsenses[] __initdata = { - MPC85XX_INTERNAL_IRQ_SENSES, - 0x0, /* External 0: */ - 0x0, /* External 1: */ -#if defined(CONFIG_PCI) - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 2: PCI slot 0 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 3: PCI slot 1 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 4: PCI slot 2 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 5: PCI slot 3 */ -#else - 0x0, /* External 2: */ - 0x0, /* External 3: */ - 0x0, /* External 4: */ - 0x0, /* External 5: */ -#endif - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 6: PHY */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 7: PHY */ - 0x0, /* External 8: */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* External 9: PHY */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* External 10: PHY */ - 0x0, /* External 11: */ -}; - -/* ************************************************************************ */ -int -sbc8560_show_cpuinfo(struct seq_file *m) -{ - uint pvid, svid, phid1; - uint memsize = total_memory; - bd_t *binfo = (bd_t *) __res; - unsigned int freq; - - /* get the core frequency */ - freq = binfo->bi_intfreq; - - pvid = mfspr(SPRN_PVR); - svid = mfspr(SPRN_SVR); - - seq_printf(m, "Vendor\t\t: Wind River\n"); - seq_printf(m, "Machine\t\t: SBC%s\n", cur_ppc_sys_spec->ppc_sys_name); - seq_printf(m, "clock\t\t: %dMHz\n", freq / 1000000); - seq_printf(m, "PVR\t\t: 0x%x\n", pvid); - seq_printf(m, "SVR\t\t: 0x%x\n", svid); - - /* Display cpu Pll setting */ - phid1 = mfspr(SPRN_HID1); - seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f)); - - /* Display the amount of memory */ - seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024)); - - return 0; -} - -void __init -sbc8560_init_IRQ(void) -{ - bd_t *binfo = (bd_t *) __res; - /* Determine the Physical Address of the OpenPIC regs */ - phys_addr_t OpenPIC_PAddr = - binfo->bi_immr_base + MPC85xx_OPENPIC_OFFSET; - OpenPIC_Addr = ioremap(OpenPIC_PAddr, MPC85xx_OPENPIC_SIZE); - OpenPIC_InitSenses = sbc8560_openpic_initsenses; - OpenPIC_NumInitSenses = sizeof (sbc8560_openpic_initsenses); - - /* Skip reserved space and internal sources */ - openpic_set_sources(0, 32, OpenPIC_Addr + 0x10200); - /* Map PIC IRQs 0-11 */ - openpic_set_sources(48, 12, OpenPIC_Addr + 0x10000); - - /* we let openpic interrupts starting from an offset, to - * leave space for cascading interrupts underneath. - */ - openpic_init(MPC85xx_OPENPIC_IRQ_OFFSET); - - return; -} - -/* - * interrupt routing - */ - -#ifdef CONFIG_PCI -int mpc85xx_map_irq(struct pci_dev *dev, unsigned char idsel, - unsigned char pin) -{ - static char pci_irq_table[][4] = - /* - * PCI IDSEL/INTPIN->INTLINE - * A B C D - */ - { - {PIRQA, PIRQB, PIRQC, PIRQD}, - {PIRQD, PIRQA, PIRQB, PIRQC}, - {PIRQC, PIRQD, PIRQA, PIRQB}, - {PIRQB, PIRQC, PIRQD, PIRQA}, - }; - - const long min_idsel = 12, max_idsel = 15, irqs_per_slot = 4; - return PCI_IRQ_TABLE_LOOKUP; -} - -int mpc85xx_exclude_device(u_char bus, u_char devfn) -{ - if (bus == 0 && PCI_SLOT(devfn) == 0) - return PCIBIOS_DEVICE_NOT_FOUND; - else - return PCIBIOS_SUCCESSFUL; -} -#endif /* CONFIG_PCI */ diff --git a/arch/ppc/platforms/85xx/sbc85xx.h b/arch/ppc/platforms/85xx/sbc85xx.h deleted file mode 100644 index 51df4dc04e22..000000000000 --- a/arch/ppc/platforms/85xx/sbc85xx.h +++ /dev/null @@ -1,70 +0,0 @@ -/* - * WindRiver PowerQUICC III SBC85xx common board definitions - * - * Copyright 2003 Motorola Inc. - * Copyright 2004 Red Hat, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -#ifndef __PLATFORMS_85XX_SBC85XX_H__ -#define __PLATFORMS_85XX_SBC85XX_H__ - -#include <linux/init.h> -#include <linux/seq_file.h> -#include <asm/ppcboot.h> - -#define BOARD_CCSRBAR ((uint)0xff700000) -#define CCSRBAR_SIZE ((uint)1024*1024) - -#define BCSR_ADDR ((uint)0xfc000000) -#define BCSR_SIZE ((uint)(16 * 1024 * 1024)) - -#define UARTA_ADDR (BCSR_ADDR + 0x00700000) -#define UARTB_ADDR (BCSR_ADDR + 0x00800000) -#define RTC_DEVICE_ADDR (BCSR_ADDR + 0x00900000) -#define EEPROM_ADDR (BCSR_ADDR + 0x00b00000) - -extern int sbc8560_show_cpuinfo(struct seq_file *m); -extern void sbc8560_init_IRQ(void) __init; - -/* PCI interrupt controller */ -#define PIRQA MPC85xx_IRQ_EXT1 -#define PIRQB MPC85xx_IRQ_EXT2 -#define PIRQC MPC85xx_IRQ_EXT3 -#define PIRQD MPC85xx_IRQ_EXT4 - -#define MPC85XX_PCI1_LOWER_IO 0x00000000 -#define MPC85XX_PCI1_UPPER_IO 0x00ffffff - -#define MPC85XX_PCI1_LOWER_MEM 0x80000000 -#define MPC85XX_PCI1_UPPER_MEM 0x9fffffff - -#define MPC85XX_PCI1_IO_BASE 0xe2000000 -#define MPC85XX_PCI1_MEM_OFFSET 0x00000000 - -#define MPC85XX_PCI1_IO_SIZE 0x01000000 - -/* FCC1 Clock Source Configuration. These can be - * redefined in the board specific file. - * Can only choose from CLK9-12 */ -#define F1_RXCLK 12 -#define F1_TXCLK 11 - -/* FCC2 Clock Source Configuration. These can be - * redefined in the board specific file. - * Can only choose from CLK13-16 */ -#define F2_RXCLK 13 -#define F2_TXCLK 14 - -/* FCC3 Clock Source Configuration. These can be - * redefined in the board specific file. - * Can only choose from CLK13-16 */ -#define F3_RXCLK 15 -#define F3_TXCLK 16 - -#endif /* __PLATFORMS_85XX_SBC85XX_H__ */ diff --git a/arch/ppc/platforms/85xx/stx_gp3.c b/arch/ppc/platforms/85xx/stx_gp3.c deleted file mode 100644 index b1f5b737c70d..000000000000 --- a/arch/ppc/platforms/85xx/stx_gp3.c +++ /dev/null @@ -1,340 +0,0 @@ -/* - * STx GP3 board specific routines - * - * Dan Malek <dan@embeddededge.com> - * Copyright 2004 Embedded Edge, LLC - * - * Copied from mpc8560_ads.c - * Copyright 2002, 2003 Motorola Inc. - * - * Ported to 2.6, Matt Porter <mporter@kernel.crashing.org> - * Copyright 2004-2005 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include <linux/stddef.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/errno.h> -#include <linux/reboot.h> -#include <linux/pci.h> -#include <linux/kdev_t.h> -#include <linux/major.h> -#include <linux/blkdev.h> -#include <linux/console.h> -#include <linux/delay.h> -#include <linux/root_dev.h> -#include <linux/seq_file.h> -#include <linux/serial.h> -#include <linux/initrd.h> -#include <linux/module.h> -#include <linux/fsl_devices.h> -#include <linux/interrupt.h> -#include <linux/rio.h> - -#include <asm/system.h> -#include <asm/pgtable.h> -#include <asm/page.h> -#include <asm/atomic.h> -#include <asm/time.h> -#include <asm/io.h> -#include <asm/machdep.h> -#include <asm/open_pic.h> -#include <asm/bootinfo.h> -#include <asm/pci-bridge.h> -#include <asm/mpc85xx.h> -#include <asm/irq.h> -#include <asm/immap_85xx.h> -#include <asm/cpm2.h> -#include <asm/mpc85xx.h> -#include <asm/ppc_sys.h> - -#include <syslib/cpm2_pic.h> -#include <syslib/ppc85xx_common.h> -#include <syslib/ppc85xx_rio.h> - - -unsigned char __res[sizeof(bd_t)]; - -#ifndef CONFIG_PCI -unsigned long isa_io_base = 0; -unsigned long isa_mem_base = 0; -unsigned long pci_dram_offset = 0; -#endif - -/* Internal interrupts are all Level Sensitive, and Positive Polarity */ -static u8 gp3_openpic_initsenses[] __initdata = { - MPC85XX_INTERNAL_IRQ_SENSES, - 0x0, /* External 0: */ -#if defined(CONFIG_PCI) - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 1: PCI slot 0 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 2: PCI slot 1 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 3: PCI slot 2 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 4: PCI slot 3 */ -#else - 0x0, /* External 1: */ - 0x0, /* External 2: */ - 0x0, /* External 3: */ - 0x0, /* External 4: */ -#endif - 0x0, /* External 5: */ - 0x0, /* External 6: */ - 0x0, /* External 7: */ - 0x0, /* External 8: */ - 0x0, /* External 9: */ - 0x0, /* External 10: */ - 0x0, /* External 11: */ -}; - -/* - * Setup the architecture - */ -static void __init -gp3_setup_arch(void) -{ - bd_t *binfo = (bd_t *) __res; - unsigned int freq; - struct gianfar_platform_data *pdata; - struct gianfar_mdio_data *mdata; - - cpm2_reset(); - - /* get the core frequency */ - freq = binfo->bi_intfreq; - - if (ppc_md.progress) - ppc_md.progress("gp3_setup_arch()", 0); - - /* Set loops_per_jiffy to a half-way reasonable value, - for use until calibrate_delay gets called. */ - loops_per_jiffy = freq / HZ; - -#ifdef CONFIG_PCI - /* setup PCI host bridges */ - mpc85xx_setup_hose(); -#endif - - /* setup the board related info for the MDIO bus */ - mdata = (struct gianfar_mdio_data *) ppc_sys_get_pdata(MPC85xx_MDIO); - - mdata->irq[2] = MPC85xx_IRQ_EXT5; - mdata->irq[4] = MPC85xx_IRQ_EXT5; - mdata->irq[31] = PHY_POLL; - - /* setup the board related information for the enet controllers */ - pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC1); - if (pdata) { - /* pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR; */ - pdata->bus_id = 0; - pdata->phy_id = 2; - memcpy(pdata->mac_addr, binfo->bi_enetaddr, 6); - } - - pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC2); - if (pdata) { - /* pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR; */ - pdata->bus_id = 0; - pdata->phy_id = 4; - memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6); - } - -#ifdef CONFIG_BLK_DEV_INITRD - if (initrd_start) - ROOT_DEV = Root_RAM0; - else -#endif -#ifdef CONFIG_ROOT_NFS - ROOT_DEV = Root_NFS; -#else - ROOT_DEV = Root_HDA1; -#endif - - printk ("bi_immr_base = %8.8lx\n", binfo->bi_immr_base); -} - -static irqreturn_t cpm2_cascade(int irq, void *dev_id) -{ - while ((irq = cpm2_get_irq()) >= 0) - __do_IRQ(irq); - - return IRQ_HANDLED; -} - -static struct irqaction cpm2_irqaction = { - .handler = cpm2_cascade, - .flags = IRQF_DISABLED, - .mask = CPU_MASK_NONE, - .name = "cpm2_cascade", -}; - -static void __init -gp3_init_IRQ(void) -{ - bd_t *binfo = (bd_t *) __res; - - /* - * Setup OpenPIC - */ - - /* Determine the Physical Address of the OpenPIC regs */ - phys_addr_t OpenPIC_PAddr = - binfo->bi_immr_base + MPC85xx_OPENPIC_OFFSET; - OpenPIC_Addr = ioremap(OpenPIC_PAddr, MPC85xx_OPENPIC_SIZE); - OpenPIC_InitSenses = gp3_openpic_initsenses; - OpenPIC_NumInitSenses = sizeof (gp3_openpic_initsenses); - - /* Skip reserved space and internal sources */ - openpic_set_sources(0, 32, OpenPIC_Addr + 0x10200); - - /* Map PIC IRQs 0-11 */ - openpic_set_sources(48, 12, OpenPIC_Addr + 0x10000); - - /* - * Let openpic interrupts starting from an offset, to - * leave space for cascading interrupts underneath. - */ - openpic_init(MPC85xx_OPENPIC_IRQ_OFFSET); - - /* Setup CPM2 PIC */ - cpm2_init_IRQ(); - - setup_irq(MPC85xx_IRQ_CPM, &cpm2_irqaction); - - return; -} - -static int -gp3_show_cpuinfo(struct seq_file *m) -{ - uint pvid, svid, phid1; - bd_t *binfo = (bd_t *) __res; - uint memsize; - unsigned int freq; - extern unsigned long total_memory; /* in mm/init */ - - /* get the core frequency */ - freq = binfo->bi_intfreq; - - pvid = mfspr(SPRN_PVR); - svid = mfspr(SPRN_SVR); - - memsize = total_memory; - - seq_printf(m, "Vendor\t\t: RPC Electronics STx \n"); - seq_printf(m, "Machine\t\t: GP3 - MPC%s\n", cur_ppc_sys_spec->ppc_sys_name); - seq_printf(m, "bus freq\t: %u.%.6u MHz\n", freq / 1000000, - freq % 1000000); - seq_printf(m, "PVR\t\t: 0x%x\n", pvid); - seq_printf(m, "SVR\t\t: 0x%x\n", svid); - - /* Display cpu Pll setting */ - phid1 = mfspr(SPRN_HID1); - seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f)); - - /* Display the amount of memory */ - seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024)); - - return 0; -} - -#ifdef CONFIG_PCI -int mpc85xx_map_irq(struct pci_dev *dev, unsigned char idsel, - unsigned char pin) -{ - static char pci_irq_table[][4] = - /* - * PCI IDSEL/INTPIN->INTLINE - * A B C D - */ - { - {PIRQA, PIRQB, PIRQC, PIRQD}, - {PIRQD, PIRQA, PIRQB, PIRQC}, - {PIRQC, PIRQD, PIRQA, PIRQB}, - {PIRQB, PIRQC, PIRQD, PIRQA}, - }; - - const long min_idsel = 12, max_idsel = 15, irqs_per_slot = 4; - return PCI_IRQ_TABLE_LOOKUP; -} - -int mpc85xx_exclude_device(u_char bus, u_char devfn) -{ - if (bus == 0 && PCI_SLOT(devfn) == 0) - return PCIBIOS_DEVICE_NOT_FOUND; - else - return PCIBIOS_SUCCESSFUL; -} -#endif /* CONFIG_PCI */ - -#ifdef CONFIG_RAPIDIO -void -platform_rio_init(void) -{ - /* - * The STx firmware configures the RapidIO Local Access Window - * at 0xc0000000 with a size of 512MB. - */ - mpc85xx_rio_setup(0xc0000000, 0x20000000); -} -#endif /* CONFIG_RAPIDIO */ - -void __init -platform_init(unsigned long r3, unsigned long r4, unsigned long r5, - unsigned long r6, unsigned long r7) -{ - /* parse_bootinfo must always be called first */ - parse_bootinfo(find_bootinfo()); - - /* - * If we were passed in a board information, copy it into the - * residual data area. - */ - if (r3) { - memcpy((void *) __res, (void *) (r3 + KERNELBASE), - sizeof (bd_t)); - - } -#if defined(CONFIG_BLK_DEV_INITRD) - /* - * If the init RAM disk has been configured in, and there's a valid - * starting address for it, set it up. - */ - if (r4) { - initrd_start = r4 + KERNELBASE; - initrd_end = r5 + KERNELBASE; - } -#endif /* CONFIG_BLK_DEV_INITRD */ - - /* Copy the kernel command line arguments to a safe place. */ - - if (r6) { - *(char *) (r7 + KERNELBASE) = 0; - strcpy(cmd_line, (char *) (r6 + KERNELBASE)); - } - - identify_ppc_sys_by_id(mfspr(SPRN_SVR)); - - /* setup the PowerPC module struct */ - ppc_md.setup_arch = gp3_setup_arch; - ppc_md.show_cpuinfo = gp3_show_cpuinfo; - - ppc_md.init_IRQ = gp3_init_IRQ; - ppc_md.get_irq = openpic_get_irq; - - ppc_md.restart = mpc85xx_restart; - ppc_md.power_off = mpc85xx_power_off; - ppc_md.halt = mpc85xx_halt; - - ppc_md.find_end_of_memory = mpc85xx_find_end_of_memory; - - ppc_md.calibrate_decr = mpc85xx_calibrate_decr; - - if (ppc_md.progress) - ppc_md.progress("platform_init(): exit", 0); - - return; -} diff --git a/arch/ppc/platforms/85xx/stx_gp3.h b/arch/ppc/platforms/85xx/stx_gp3.h deleted file mode 100644 index c6e34c09e979..000000000000 --- a/arch/ppc/platforms/85xx/stx_gp3.h +++ /dev/null @@ -1,69 +0,0 @@ -/* - * STx GP3 board definitions - * - * Dan Malek (dan@embeddededge.com) - * Copyright 2004 Embedded Edge, LLC - * - * Ported to 2.6, Matt Porter <mporter@kernel.crashing.org> - * Copyright 2004-2005 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -#ifndef __MACH_STX_GP3_H -#define __MACH_STX_GP3_H - -#include <linux/init.h> -#include <asm/ppcboot.h> - -#define BOARD_CCSRBAR ((uint)0xe0000000) -#define CCSRBAR_SIZE ((uint)1024*1024) - -#define CPM_MAP_ADDR (CCSRBAR + MPC85xx_CPM_OFFSET) - -#define BCSR_ADDR ((uint)0xfc000000) -#define BCSR_SIZE ((uint)(16 * 1024)) - -#define BCSR_TSEC1_RESET 0x00000080 -#define BCSR_TSEC2_RESET 0x00000040 -#define BCSR_LED1 0x00000008 -#define BCSR_LED2 0x00000004 -#define BCSR_LED3 0x00000002 -#define BCSR_LED4 0x00000001 - -extern void mpc85xx_setup_hose(void) __init; -extern void mpc85xx_restart(char *cmd); -extern void mpc85xx_power_off(void); -extern void mpc85xx_halt(void); -extern void mpc85xx_init_IRQ(void) __init; -extern unsigned long mpc85xx_find_end_of_memory(void) __init; -extern void mpc85xx_calibrate_decr(void) __init; - -#define PCI_CFG_ADDR_OFFSET (0x8000) -#define PCI_CFG_DATA_OFFSET (0x8004) - -/* PCI interrupt controller */ -#define PIRQA MPC85xx_IRQ_EXT1 -#define PIRQB MPC85xx_IRQ_EXT2 -#define PIRQC MPC85xx_IRQ_EXT3 -#define PIRQD MPC85xx_IRQ_EXT4 -#define PCI_MIN_IDSEL 16 -#define PCI_MAX_IDSEL 19 -#define PCI_IRQ_SLOT 4 - -#define MPC85XX_PCI1_LOWER_IO 0x00000000 -#define MPC85XX_PCI1_UPPER_IO 0x00ffffff - -#define MPC85XX_PCI1_LOWER_MEM 0x80000000 -#define MPC85XX_PCI1_UPPER_MEM 0x9fffffff - -#define MPC85XX_PCI1_IO_BASE 0xe2000000 -#define MPC85XX_PCI1_MEM_OFFSET 0x00000000 - -#define MPC85XX_PCI1_IO_SIZE 0x01000000 - -#endif /* __MACH_STX_GP3_H */ diff --git a/arch/ppc/platforms/85xx/tqm85xx.c b/arch/ppc/platforms/85xx/tqm85xx.c deleted file mode 100644 index 27ce389c1224..000000000000 --- a/arch/ppc/platforms/85xx/tqm85xx.c +++ /dev/null @@ -1,391 +0,0 @@ -/* - * TQM85xx (40/41/55/60) board specific routines - * - * Copyright (c) 2005 DENX Software Engineering - * Stefan Roese <sr@denx.de> - * - * Based on original work by - * Kumar Gala <galak@kernel.crashing.org> - * Copyright 2004 Freescale Semiconductor Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include <linux/stddef.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/errno.h> -#include <linux/reboot.h> -#include <linux/pci.h> -#include <linux/kdev_t.h> -#include <linux/major.h> -#include <linux/console.h> -#include <linux/delay.h> -#include <linux/seq_file.h> -#include <linux/root_dev.h> -#include <linux/serial.h> -#include <linux/tty.h> /* for linux/serial_core.h */ -#include <linux/serial_core.h> -#include <linux/initrd.h> -#include <linux/module.h> -#include <linux/fsl_devices.h> - -#include <asm/system.h> -#include <asm/pgtable.h> -#include <asm/page.h> -#include <asm/atomic.h> -#include <asm/time.h> -#include <asm/io.h> -#include <asm/machdep.h> -#include <asm/open_pic.h> -#include <asm/bootinfo.h> -#include <asm/pci-bridge.h> -#include <asm/mpc85xx.h> -#include <asm/irq.h> -#include <asm/immap_85xx.h> -#include <asm/kgdb.h> -#include <asm/ppc_sys.h> -#include <asm/cpm2.h> -#include <mm/mmu_decl.h> - -#include <syslib/ppc85xx_setup.h> -#include <syslib/cpm2_pic.h> -#include <syslib/ppc85xx_common.h> -#include <syslib/ppc85xx_rio.h> - -#ifndef CONFIG_PCI -unsigned long isa_io_base = 0; -unsigned long isa_mem_base = 0; -#endif - - -extern unsigned long total_memory; /* in mm/init */ - -unsigned char __res[sizeof (bd_t)]; - -/* Internal interrupts are all Level Sensitive, and Positive Polarity */ -static u_char tqm85xx_openpic_initsenses[] __initdata = { - MPC85XX_INTERNAL_IRQ_SENSES, - 0x0, /* External 0: */ - 0x0, /* External 1: */ -#if defined(CONFIG_PCI) - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 2: PCI INTA */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 3: PCI INTB */ -#else - 0x0, /* External 2: */ - 0x0, /* External 3: */ -#endif - 0x0, /* External 4: */ - 0x0, /* External 5: */ - 0x0, /* External 6: */ - 0x0, /* External 7: */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 8: PHY */ - 0x0, /* External 9: */ - 0x0, /* External 10: */ - 0x0, /* External 11: */ -}; - -/* ************************************************************************ - * - * Setup the architecture - * - */ -static void __init -tqm85xx_setup_arch(void) -{ - bd_t *binfo = (bd_t *) __res; - unsigned int freq; - struct gianfar_platform_data *pdata; - struct gianfar_mdio_data *mdata; - -#ifdef CONFIG_MPC8560 - cpm2_reset(); -#endif - - /* get the core frequency */ - freq = binfo->bi_intfreq; - - if (ppc_md.progress) - ppc_md.progress("tqm85xx_setup_arch()", 0); - - /* Set loops_per_jiffy to a half-way reasonable value, - for use until calibrate_delay gets called. */ - loops_per_jiffy = freq / HZ; - -#ifdef CONFIG_PCI - /* setup PCI host bridges */ - mpc85xx_setup_hose(); -#endif - -#ifndef CONFIG_MPC8560 -#if defined(CONFIG_SERIAL_8250) - mpc85xx_early_serial_map(); -#endif - -#ifdef CONFIG_SERIAL_TEXT_DEBUG - /* Invalidate the entry we stole earlier the serial ports - * should be properly mapped */ - invalidate_tlbcam_entry(num_tlbcam_entries - 1); -#endif -#endif /* CONFIG_MPC8560 */ - - /* setup the board related info for the MDIO bus */ - mdata = (struct gianfar_mdio_data *) ppc_sys_get_pdata(MPC85xx_MDIO); - - mdata->irq[0] = MPC85xx_IRQ_EXT8; - mdata->irq[1] = MPC85xx_IRQ_EXT8; - mdata->irq[2] = PHY_POLL; - mdata->irq[3] = MPC85xx_IRQ_EXT8; - mdata->irq[31] = PHY_POLL; - - /* setup the board related information for the enet controllers */ - pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC1); - if (pdata) { - pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR; - pdata->bus_id = 0; - pdata->phy_id = 2; - memcpy(pdata->mac_addr, binfo->bi_enetaddr, 6); - } - - pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC2); - if (pdata) { - pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR; - pdata->bus_id = 0; - pdata->phy_id = 1; - memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6); - } - -#ifdef CONFIG_MPC8540 - pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_FEC); - if (pdata) { - pdata->board_flags = 0; - pdata->bus_id = 0; - pdata->phy_id = 3; - memcpy(pdata->mac_addr, binfo->bi_enet2addr, 6); - } -#endif - -#ifdef CONFIG_BLK_DEV_INITRD - if (initrd_start) - ROOT_DEV = Root_RAM0; - else -#endif -#ifdef CONFIG_ROOT_NFS - ROOT_DEV = Root_NFS; -#else - ROOT_DEV = Root_HDA1; -#endif -} - -#ifdef CONFIG_MPC8560 -static irqreturn_t cpm2_cascade(int irq, void *dev_id) -{ - while ((irq = cpm2_get_irq()) >= 0) - __do_IRQ(irq); - return IRQ_HANDLED; -} - -static struct irqaction cpm2_irqaction = { - .handler = cpm2_cascade, - .flags = IRQF_DISABLED, - .mask = CPU_MASK_NONE, - .name = "cpm2_cascade", -}; -#endif /* CONFIG_MPC8560 */ - -void __init -tqm85xx_init_IRQ(void) -{ - bd_t *binfo = (bd_t *) __res; - - /* Determine the Physical Address of the OpenPIC regs */ - phys_addr_t OpenPIC_PAddr = - binfo->bi_immr_base + MPC85xx_OPENPIC_OFFSET; - OpenPIC_Addr = ioremap(OpenPIC_PAddr, MPC85xx_OPENPIC_SIZE); - OpenPIC_InitSenses = tqm85xx_openpic_initsenses; - OpenPIC_NumInitSenses = sizeof (tqm85xx_openpic_initsenses); - - /* Skip reserved space and internal sources */ - openpic_set_sources(0, 32, OpenPIC_Addr + 0x10200); - - /* Map PIC IRQs 0-11 */ - openpic_set_sources(48, 12, OpenPIC_Addr + 0x10000); - - /* we let openpic interrupts starting from an offset, to - * leave space for cascading interrupts underneath. - */ - openpic_init(MPC85xx_OPENPIC_IRQ_OFFSET); - -#ifdef CONFIG_MPC8560 - /* Setup CPM2 PIC */ - cpm2_init_IRQ(); - - setup_irq(MPC85xx_IRQ_CPM, &cpm2_irqaction); -#endif /* CONFIG_MPC8560 */ - - return; -} - -int tqm85xx_show_cpuinfo(struct seq_file *m) -{ - uint pvid, svid, phid1; - uint memsize = total_memory; - bd_t *binfo = (bd_t *) __res; - unsigned int freq; - - /* get the core frequency */ - freq = binfo->bi_intfreq; - - pvid = mfspr(SPRN_PVR); - svid = mfspr(SPRN_SVR); - - seq_printf(m, "Vendor\t\t: TQ Components\n"); - seq_printf(m, "Machine\t\t: TQM%s\n", cur_ppc_sys_spec->ppc_sys_name); - seq_printf(m, "clock\t\t: %dMHz\n", freq / 1000000); - seq_printf(m, "PVR\t\t: 0x%x\n", pvid); - seq_printf(m, "SVR\t\t: 0x%x\n", svid); - - /* Display cpu Pll setting */ - phid1 = mfspr(SPRN_HID1); - seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f)); - - /* Display the amount of memory */ - seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024)); - - return 0; -} - -#ifdef CONFIG_PCI -/* - * interrupt routing - */ -int mpc85xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) -{ - static char pci_irq_table[][4] = - /* - * PCI IDSEL/INTPIN->INTLINE - * A B C D - */ - { - {PIRQA, PIRQB, 0, 0}, - }; - - const long min_idsel = 0x1c, max_idsel = 0x1c, irqs_per_slot = 4; - return PCI_IRQ_TABLE_LOOKUP; -} - -int mpc85xx_exclude_device(u_char bus, u_char devfn) -{ - if (bus == 0 && PCI_SLOT(devfn) == 0) - return PCIBIOS_DEVICE_NOT_FOUND; - else - return PCIBIOS_SUCCESSFUL; -} - -#endif /* CONFIG_PCI */ - -#ifdef CONFIG_RAPIDIO -void platform_rio_init(void) -{ - /* 512MB RIO LAW at 0xc0000000 */ - mpc85xx_rio_setup(0xc0000000, 0x20000000); -} -#endif /* CONFIG_RAPIDIO */ - -/* ************************************************************************ */ -void __init -platform_init(unsigned long r3, unsigned long r4, unsigned long r5, - unsigned long r6, unsigned long r7) -{ - /* parse_bootinfo must always be called first */ - parse_bootinfo(find_bootinfo()); - - /* - * If we were passed in a board information, copy it into the - * residual data area. - */ - if (r3) { - memcpy((void *) __res, (void *) (r3 + KERNELBASE), - sizeof (bd_t)); - } - -#if defined(CONFIG_SERIAL_TEXT_DEBUG) && !defined(CONFIG_MPC8560) - { - bd_t *binfo = (bd_t *) __res; - struct uart_port p; - - /* Use the last TLB entry to map CCSRBAR to allow access to DUART regs */ - settlbcam(num_tlbcam_entries - 1, binfo->bi_immr_base, - binfo->bi_immr_base, MPC85xx_CCSRBAR_SIZE, _PAGE_IO, 0); - - memset(&p, 0, sizeof (p)); - p.iotype = UPIO_MEM; - p.membase = (void *) binfo->bi_immr_base + MPC85xx_UART0_OFFSET; - p.uartclk = binfo->bi_busfreq; - - gen550_init(0, &p); - - memset(&p, 0, sizeof (p)); - p.iotype = UPIO_MEM; - p.membase = (void *) binfo->bi_immr_base + MPC85xx_UART1_OFFSET; - p.uartclk = binfo->bi_busfreq; - - gen550_init(1, &p); - } -#endif - -#if defined(CONFIG_BLK_DEV_INITRD) - /* - * If the init RAM disk has been configured in, and there's a valid - * starting address for it, set it up. - */ - if (r4) { - initrd_start = r4 + KERNELBASE; - initrd_end = r5 + KERNELBASE; - } -#endif /* CONFIG_BLK_DEV_INITRD */ - - /* Copy the kernel command line arguments to a safe place. */ - - if (r6) { - *(char *) (r7 + KERNELBASE) = 0; - strcpy(cmd_line, (char *) (r6 + KERNELBASE)); - } - - identify_ppc_sys_by_id(mfspr(SPRN_SVR)); - - /* setup the PowerPC module struct */ - ppc_md.setup_arch = tqm85xx_setup_arch; - ppc_md.show_cpuinfo = tqm85xx_show_cpuinfo; - - ppc_md.init_IRQ = tqm85xx_init_IRQ; - ppc_md.get_irq = openpic_get_irq; - - ppc_md.restart = mpc85xx_restart; - ppc_md.power_off = mpc85xx_power_off; - ppc_md.halt = mpc85xx_halt; - - ppc_md.find_end_of_memory = mpc85xx_find_end_of_memory; - - ppc_md.time_init = NULL; - ppc_md.set_rtc_time = NULL; - ppc_md.get_rtc_time = NULL; - ppc_md.calibrate_decr = mpc85xx_calibrate_decr; - -#ifndef CONFIG_MPC8560 -#if defined(CONFIG_SERIAL_8250) && defined(CONFIG_SERIAL_TEXT_DEBUG) - ppc_md.progress = gen550_progress; -#endif /* CONFIG_SERIAL_8250 && CONFIG_SERIAL_TEXT_DEBUG */ -#if defined(CONFIG_SERIAL_8250) && defined(CONFIG_KGDB) - ppc_md.early_serial_map = mpc85xx_early_serial_map; -#endif /* CONFIG_SERIAL_8250 && CONFIG_KGDB */ -#endif /* CONFIG_MPC8560 */ - - if (ppc_md.progress) - ppc_md.progress("tqm85xx_init(): exit", 0); - - return; -} diff --git a/arch/ppc/platforms/85xx/tqm85xx.h b/arch/ppc/platforms/85xx/tqm85xx.h deleted file mode 100644 index 57284e68f676..000000000000 --- a/arch/ppc/platforms/85xx/tqm85xx.h +++ /dev/null @@ -1,53 +0,0 @@ -/* - * TQM85xx (40/41/55/60) board definitions - * - * Copyright (c) 2005 DENX Software Engineering - * Stefan Roese <sr@denx.de> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -#ifndef __MACH_TQM85XX_H -#define __MACH_TQM85XX_H - -#include <linux/init.h> -#include <asm/ppcboot.h> - -#define BOARD_CCSRBAR ((uint)0xe0000000) -#define CCSRBAR_SIZE ((uint)1024*1024) - -#define CPM_MAP_ADDR (CCSRBAR + MPC85xx_CPM_OFFSET) - -#define PCI_CFG_ADDR_OFFSET (0x8000) -#define PCI_CFG_DATA_OFFSET (0x8004) - -/* PCI interrupt controller */ -#define PIRQA MPC85xx_IRQ_EXT2 -#define PIRQB MPC85xx_IRQ_EXT3 - -#define MPC85XX_PCI1_LOWER_IO 0x00000000 -#define MPC85XX_PCI1_UPPER_IO 0x00ffffff - -#define MPC85XX_PCI1_LOWER_MEM 0x80000000 -#define MPC85XX_PCI1_UPPER_MEM 0x9fffffff - -#define MPC85XX_PCI1_IO_BASE 0xe2000000 -#define MPC85XX_PCI1_MEM_OFFSET 0x00000000 - -#define MPC85XX_PCI1_IO_SIZE 0x01000000 - -#define BASE_BAUD 115200 - -extern void mpc85xx_setup_hose(void) __init; -extern void mpc85xx_restart(char *cmd); -extern void mpc85xx_power_off(void); -extern void mpc85xx_halt(void); -extern void mpc85xx_init_IRQ(void) __init; -extern unsigned long mpc85xx_find_end_of_memory(void) __init; -extern void mpc85xx_calibrate_decr(void) __init; - -#endif /* __MACH_TQM85XX_H */ diff --git a/arch/ppc/platforms/ev64260.c b/arch/ppc/platforms/ev64260.c index 976270d537c1..c1f77e1d368e 100644 --- a/arch/ppc/platforms/ev64260.c +++ b/arch/ppc/platforms/ev64260.c @@ -336,7 +336,7 @@ ev64260_early_serial_map(void) #endif if (early_serial_setup(&port) != 0) - printk(KERN_WARNING "Early serial init of port 0" + printk(KERN_WARNING "Early serial init of port 0 " "failed\n"); first_time = 0; @@ -388,7 +388,7 @@ ev64260_setup_arch(void) ev64260_early_serial_map(); #endif - printk(KERN_INFO "%s %s port (C) 2001 MontaVista Software, Inc." + printk(KERN_INFO "%s %s port (C) 2001 MontaVista Software, Inc. " "(source@mvista.com)\n", BOARD_VENDOR, BOARD_MACHINE); if (ppc_md.progress) diff --git a/arch/ppc/platforms/mpc866ads_setup.c b/arch/ppc/platforms/mpc866ads_setup.c index bf72204125c5..62370f4a5a0f 100644 --- a/arch/ppc/platforms/mpc866ads_setup.c +++ b/arch/ppc/platforms/mpc866ads_setup.c @@ -32,7 +32,7 @@ #include <asm/time.h> #include <asm/ppcboot.h> #include <asm/8xx_immap.h> -#include <asm/commproc.h> +#include <asm/cpm1.h> #include <asm/ppc_sys.h> #include <asm/mpc8xx.h> diff --git a/arch/ppc/platforms/mpc885ads_setup.c b/arch/ppc/platforms/mpc885ads_setup.c index 87deaefd6c5b..ba06cc08cdab 100644 --- a/arch/ppc/platforms/mpc885ads_setup.c +++ b/arch/ppc/platforms/mpc885ads_setup.c @@ -31,7 +31,7 @@ #include <asm/time.h> #include <asm/ppcboot.h> #include <asm/8xx_immap.h> -#include <asm/commproc.h> +#include <asm/cpm1.h> #include <asm/ppc_sys.h> extern unsigned char __res[]; diff --git a/arch/ppc/platforms/prep_pci.c b/arch/ppc/platforms/prep_pci.c index 1df3150f016e..8ed433e2a5c7 100644 --- a/arch/ppc/platforms/prep_pci.c +++ b/arch/ppc/platforms/prep_pci.c @@ -1099,7 +1099,6 @@ prep_pib_init(void) pci_write_config_byte(dev, 0x43, reg); } } - pci_dev_put(dev); } if ((dev = pci_get_device(PCI_VENDOR_ID_WINBOND, diff --git a/arch/ppc/syslib/Makefile b/arch/ppc/syslib/Makefile index 543795be58c8..52ddebe6c6d1 100644 --- a/arch/ppc/syslib/Makefile +++ b/arch/ppc/syslib/Makefile @@ -87,20 +87,6 @@ endif obj-$(CONFIG_BOOTX_TEXT) += btext.o obj-$(CONFIG_MPC10X_BRIDGE) += mpc10x_common.o ppc_sys.o obj-$(CONFIG_MPC10X_OPENPIC) += open_pic.o -obj-$(CONFIG_85xx) += open_pic.o ppc85xx_common.o ppc85xx_setup.o \ - ppc_sys.o mpc85xx_sys.o \ - mpc85xx_devices.o -ifeq ($(CONFIG_85xx),y) -obj-$(CONFIG_PCI) += pci_auto.o -endif -obj-$(CONFIG_RAPIDIO) += ppc85xx_rio.o -obj-$(CONFIG_83xx) += ppc83xx_setup.o ppc_sys.o \ - mpc83xx_sys.o mpc83xx_devices.o ipic.o -ifeq ($(CONFIG_83xx),y) -obj-$(CONFIG_PCI) += pci_auto.o -endif -obj-$(CONFIG_MPC8548_CDS) += todc_time.o -obj-$(CONFIG_MPC8555_CDS) += todc_time.o obj-$(CONFIG_PPC_MPC52xx) += mpc52xx_setup.o mpc52xx_pic.o \ mpc52xx_sys.o mpc52xx_devices.o ppc_sys.o ifeq ($(CONFIG_PPC_MPC52xx),y) diff --git a/arch/ppc/syslib/gt64260_pic.c b/arch/ppc/syslib/gt64260_pic.c index e84d432c0657..3b4fcca5d1e1 100644 --- a/arch/ppc/syslib/gt64260_pic.c +++ b/arch/ppc/syslib/gt64260_pic.c @@ -35,7 +35,6 @@ #include <linux/interrupt.h> #include <linux/sched.h> #include <linux/signal.h> -#include <linux/stddef.h> #include <linux/delay.h> #include <linux/irq.h> diff --git a/arch/ppc/syslib/ipic.c b/arch/ppc/syslib/ipic.c deleted file mode 100644 index 4f163e20939e..000000000000 --- a/arch/ppc/syslib/ipic.c +++ /dev/null @@ -1,646 +0,0 @@ -/* - * arch/ppc/syslib/ipic.c - * - * IPIC routines implementations. - * - * Copyright 2005 Freescale Semiconductor, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/errno.h> -#include <linux/reboot.h> -#include <linux/slab.h> -#include <linux/stddef.h> -#include <linux/sched.h> -#include <linux/signal.h> -#include <linux/sysdev.h> -#include <asm/irq.h> -#include <asm/io.h> -#include <asm/ipic.h> -#include <asm/mpc83xx.h> - -#include "ipic.h" - -static struct ipic p_ipic; -static struct ipic * primary_ipic; - -static struct ipic_info ipic_info[] = { - [9] = { - .pend = IPIC_SIPNR_H, - .mask = IPIC_SIMSR_H, - .prio = IPIC_SIPRR_D, - .force = IPIC_SIFCR_H, - .bit = 24, - .prio_mask = 0, - }, - [10] = { - .pend = IPIC_SIPNR_H, - .mask = IPIC_SIMSR_H, - .prio = IPIC_SIPRR_D, - .force = IPIC_SIFCR_H, - .bit = 25, - .prio_mask = 1, - }, - [11] = { - .pend = IPIC_SIPNR_H, - .mask = IPIC_SIMSR_H, - .prio = IPIC_SIPRR_D, - .force = IPIC_SIFCR_H, - .bit = 26, - .prio_mask = 2, - }, - [14] = { - .pend = IPIC_SIPNR_H, - .mask = IPIC_SIMSR_H, - .prio = IPIC_SIPRR_D, - .force = IPIC_SIFCR_H, - .bit = 29, - .prio_mask = 5, - }, - [15] = { - .pend = IPIC_SIPNR_H, - .mask = IPIC_SIMSR_H, - .prio = IPIC_SIPRR_D, - .force = IPIC_SIFCR_H, - .bit = 30, - .prio_mask = 6, - }, - [16] = { - .pend = IPIC_SIPNR_H, - .mask = IPIC_SIMSR_H, - .prio = IPIC_SIPRR_D, - .force = IPIC_SIFCR_H, - .bit = 31, - .prio_mask = 7, - }, - [17] = { - .pend = IPIC_SEPNR, - .mask = IPIC_SEMSR, - .prio = IPIC_SMPRR_A, - .force = IPIC_SEFCR, - .bit = 1, - .prio_mask = 5, - }, - [18] = { - .pend = IPIC_SEPNR, - .mask = IPIC_SEMSR, - .prio = IPIC_SMPRR_A, - .force = IPIC_SEFCR, - .bit = 2, - .prio_mask = 6, - }, - [19] = { - .pend = IPIC_SEPNR, - .mask = IPIC_SEMSR, - .prio = IPIC_SMPRR_A, - .force = IPIC_SEFCR, - .bit = 3, - .prio_mask = 7, - }, - [20] = { - .pend = IPIC_SEPNR, - .mask = IPIC_SEMSR, - .prio = IPIC_SMPRR_B, - .force = IPIC_SEFCR, - .bit = 4, - .prio_mask = 4, - }, - [21] = { - .pend = IPIC_SEPNR, - .mask = IPIC_SEMSR, - .prio = IPIC_SMPRR_B, - .force = IPIC_SEFCR, - .bit = 5, - .prio_mask = 5, - }, - [22] = { - .pend = IPIC_SEPNR, - .mask = IPIC_SEMSR, - .prio = IPIC_SMPRR_B, - .force = IPIC_SEFCR, - .bit = 6, - .prio_mask = 6, - }, - [23] = { - .pend = IPIC_SEPNR, - .mask = IPIC_SEMSR, - .prio = IPIC_SMPRR_B, - .force = IPIC_SEFCR, - .bit = 7, - .prio_mask = 7, - }, - [32] = { - .pend = IPIC_SIPNR_H, - .mask = IPIC_SIMSR_H, - .prio = IPIC_SIPRR_A, - .force = IPIC_SIFCR_H, - .bit = 0, - .prio_mask = 0, - }, - [33] = { - .pend = IPIC_SIPNR_H, - .mask = IPIC_SIMSR_H, - .prio = IPIC_SIPRR_A, - .force = IPIC_SIFCR_H, - .bit = 1, - .prio_mask = 1, - }, - [34] = { - .pend = IPIC_SIPNR_H, - .mask = IPIC_SIMSR_H, - .prio = IPIC_SIPRR_A, - .force = IPIC_SIFCR_H, - .bit = 2, - .prio_mask = 2, - }, - [35] = { - .pend = IPIC_SIPNR_H, - .mask = IPIC_SIMSR_H, - .prio = IPIC_SIPRR_A, - .force = IPIC_SIFCR_H, - .bit = 3, - .prio_mask = 3, - }, - [36] = { - .pend = IPIC_SIPNR_H, - .mask = IPIC_SIMSR_H, - .prio = IPIC_SIPRR_A, - .force = IPIC_SIFCR_H, - .bit = 4, - .prio_mask = 4, - }, - [37] = { - .pend = IPIC_SIPNR_H, - .mask = IPIC_SIMSR_H, - .prio = IPIC_SIPRR_A, - .force = IPIC_SIFCR_H, - .bit = 5, - .prio_mask = 5, - }, - [38] = { - .pend = IPIC_SIPNR_H, - .mask = IPIC_SIMSR_H, - .prio = IPIC_SIPRR_A, - .force = IPIC_SIFCR_H, - .bit = 6, - .prio_mask = 6, - }, - [39] = { - .pend = IPIC_SIPNR_H, - .mask = IPIC_SIMSR_H, - .prio = IPIC_SIPRR_A, - .force = IPIC_SIFCR_H, - .bit = 7, - .prio_mask = 7, - }, - [48] = { - .pend = IPIC_SEPNR, - .mask = IPIC_SEMSR, - .prio = IPIC_SMPRR_A, - .force = IPIC_SEFCR, - .bit = 0, - .prio_mask = 4, - }, - [64] = { - .pend = IPIC_SIPNR_H, - .mask = IPIC_SIMSR_L, - .prio = IPIC_SMPRR_A, - .force = IPIC_SIFCR_L, - .bit = 0, - .prio_mask = 0, - }, - [65] = { - .pend = IPIC_SIPNR_H, - .mask = IPIC_SIMSR_L, - .prio = IPIC_SMPRR_A, - .force = IPIC_SIFCR_L, - .bit = 1, - .prio_mask = 1, - }, - [66] = { - .pend = IPIC_SIPNR_H, - .mask = IPIC_SIMSR_L, - .prio = IPIC_SMPRR_A, - .force = IPIC_SIFCR_L, - .bit = 2, - .prio_mask = 2, - }, - [67] = { - .pend = IPIC_SIPNR_H, - .mask = IPIC_SIMSR_L, - .prio = IPIC_SMPRR_A, - .force = IPIC_SIFCR_L, - .bit = 3, - .prio_mask = 3, - }, - [68] = { - .pend = IPIC_SIPNR_H, - .mask = IPIC_SIMSR_L, - .prio = IPIC_SMPRR_B, - .force = IPIC_SIFCR_L, - .bit = 4, - .prio_mask = 0, - }, - [69] = { - .pend = IPIC_SIPNR_H, - .mask = IPIC_SIMSR_L, - .prio = IPIC_SMPRR_B, - .force = IPIC_SIFCR_L, - .bit = 5, - .prio_mask = 1, - }, - [70] = { - .pend = IPIC_SIPNR_H, - .mask = IPIC_SIMSR_L, - .prio = IPIC_SMPRR_B, - .force = IPIC_SIFCR_L, - .bit = 6, - .prio_mask = 2, - }, - [71] = { - .pend = IPIC_SIPNR_H, - .mask = IPIC_SIMSR_L, - .prio = IPIC_SMPRR_B, - .force = IPIC_SIFCR_L, - .bit = 7, - .prio_mask = 3, - }, - [72] = { - .pend = IPIC_SIPNR_H, - .mask = IPIC_SIMSR_L, - .prio = 0, - .force = IPIC_SIFCR_L, - .bit = 8, - }, - [73] = { - .pend = IPIC_SIPNR_H, - .mask = IPIC_SIMSR_L, - .prio = 0, - .force = IPIC_SIFCR_L, - .bit = 9, - }, - [74] = { - .pend = IPIC_SIPNR_H, - .mask = IPIC_SIMSR_L, - .prio = 0, - .force = IPIC_SIFCR_L, - .bit = 10, - }, - [75] = { - .pend = IPIC_SIPNR_H, - .mask = IPIC_SIMSR_L, - .prio = 0, - .force = IPIC_SIFCR_L, - .bit = 11, - }, - [76] = { - .pend = IPIC_SIPNR_H, - .mask = IPIC_SIMSR_L, - .prio = 0, - .force = IPIC_SIFCR_L, - .bit = 12, - }, - [77] = { - .pend = IPIC_SIPNR_H, - .mask = IPIC_SIMSR_L, - .prio = 0, - .force = IPIC_SIFCR_L, - .bit = 13, - }, - [78] = { - .pend = IPIC_SIPNR_H, - .mask = IPIC_SIMSR_L, - .prio = 0, - .force = IPIC_SIFCR_L, - .bit = 14, - }, - [79] = { - .pend = IPIC_SIPNR_H, - .mask = IPIC_SIMSR_L, - .prio = 0, - .force = IPIC_SIFCR_L, - .bit = 15, - }, - [80] = { - .pend = IPIC_SIPNR_H, - .mask = IPIC_SIMSR_L, - .prio = 0, - .force = IPIC_SIFCR_L, - .bit = 16, - }, - [84] = { - .pend = IPIC_SIPNR_H, - .mask = IPIC_SIMSR_L, - .prio = 0, - .force = IPIC_SIFCR_L, - .bit = 20, - }, - [85] = { - .pend = IPIC_SIPNR_H, - .mask = IPIC_SIMSR_L, - .prio = 0, - .force = IPIC_SIFCR_L, - .bit = 21, - }, - [90] = { - .pend = IPIC_SIPNR_H, - .mask = IPIC_SIMSR_L, - .prio = 0, - .force = IPIC_SIFCR_L, - .bit = 26, - }, - [91] = { - .pend = IPIC_SIPNR_H, - .mask = IPIC_SIMSR_L, - .prio = 0, - .force = IPIC_SIFCR_L, - .bit = 27, - }, -}; - -static inline u32 ipic_read(volatile u32 __iomem *base, unsigned int reg) -{ - return in_be32(base + (reg >> 2)); -} - -static inline void ipic_write(volatile u32 __iomem *base, unsigned int reg, u32 value) -{ - out_be32(base + (reg >> 2), value); -} - -static inline struct ipic * ipic_from_irq(unsigned int irq) -{ - return primary_ipic; -} - -static void ipic_enable_irq(unsigned int irq) -{ - struct ipic *ipic = ipic_from_irq(irq); - unsigned int src = irq - ipic->irq_offset; - u32 temp; - - temp = ipic_read(ipic->regs, ipic_info[src].mask); - temp |= (1 << (31 - ipic_info[src].bit)); - ipic_write(ipic->regs, ipic_info[src].mask, temp); -} - -static void ipic_disable_irq(unsigned int irq) -{ - struct ipic *ipic = ipic_from_irq(irq); - unsigned int src = irq - ipic->irq_offset; - u32 temp; - - temp = ipic_read(ipic->regs, ipic_info[src].mask); - temp &= ~(1 << (31 - ipic_info[src].bit)); - ipic_write(ipic->regs, ipic_info[src].mask, temp); -} - -static void ipic_disable_irq_and_ack(unsigned int irq) -{ - struct ipic *ipic = ipic_from_irq(irq); - unsigned int src = irq - ipic->irq_offset; - u32 temp; - - ipic_disable_irq(irq); - - temp = ipic_read(ipic->regs, ipic_info[src].pend); - temp |= (1 << (31 - ipic_info[src].bit)); - ipic_write(ipic->regs, ipic_info[src].pend, temp); -} - -static void ipic_end_irq(unsigned int irq) -{ - if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) - ipic_enable_irq(irq); -} - -struct hw_interrupt_type ipic = { - .typename = " IPIC ", - .enable = ipic_enable_irq, - .disable = ipic_disable_irq, - .ack = ipic_disable_irq_and_ack, - .end = ipic_end_irq, -}; - -void __init ipic_init(phys_addr_t phys_addr, - unsigned int flags, - unsigned int irq_offset, - unsigned char *senses, - unsigned int senses_count) -{ - u32 i, temp = 0; - - primary_ipic = &p_ipic; - primary_ipic->regs = ioremap(phys_addr, MPC83xx_IPIC_SIZE); - - primary_ipic->irq_offset = irq_offset; - - ipic_write(primary_ipic->regs, IPIC_SICNR, 0x0); - - /* default priority scheme is grouped. If spread mode is required - * configure SICFR accordingly */ - if (flags & IPIC_SPREADMODE_GRP_A) - temp |= SICFR_IPSA; - if (flags & IPIC_SPREADMODE_GRP_D) - temp |= SICFR_IPSD; - if (flags & IPIC_SPREADMODE_MIX_A) - temp |= SICFR_MPSA; - if (flags & IPIC_SPREADMODE_MIX_B) - temp |= SICFR_MPSB; - - ipic_write(primary_ipic->regs, IPIC_SICNR, temp); - - /* handle MCP route */ - temp = 0; - if (flags & IPIC_DISABLE_MCP_OUT) - temp = SERCR_MCPR; - ipic_write(primary_ipic->regs, IPIC_SERCR, temp); - - /* handle routing of IRQ0 to MCP */ - temp = ipic_read(primary_ipic->regs, IPIC_SEMSR); - - if (flags & IPIC_IRQ0_MCP) - temp |= SEMSR_SIRQ0; - else - temp &= ~SEMSR_SIRQ0; - - ipic_write(primary_ipic->regs, IPIC_SEMSR, temp); - - for (i = 0 ; i < NR_IPIC_INTS ; i++) { - irq_desc[i+irq_offset].chip = &ipic; - irq_desc[i+irq_offset].status = IRQ_LEVEL; - } - - temp = 0; - for (i = 0 ; i < senses_count ; i++) { - if ((senses[i] & IRQ_SENSE_MASK) == IRQ_SENSE_EDGE) { - temp |= 1 << (15 - i); - if (i != 0) - irq_desc[i + irq_offset + MPC83xx_IRQ_EXT1 - 1].status = 0; - else - irq_desc[irq_offset + MPC83xx_IRQ_EXT0].status = 0; - } - } - ipic_write(primary_ipic->regs, IPIC_SECNR, temp); - - printk ("IPIC (%d IRQ sources, %d External IRQs) at %p\n", NR_IPIC_INTS, - senses_count, primary_ipic->regs); -} - -int ipic_set_priority(unsigned int irq, unsigned int priority) -{ - struct ipic *ipic = ipic_from_irq(irq); - unsigned int src = irq - ipic->irq_offset; - u32 temp; - - if (priority > 7) - return -EINVAL; - if (src > 127) - return -EINVAL; - if (ipic_info[src].prio == 0) - return -EINVAL; - - temp = ipic_read(ipic->regs, ipic_info[src].prio); - - if (priority < 4) { - temp &= ~(0x7 << (20 + (3 - priority) * 3)); - temp |= ipic_info[src].prio_mask << (20 + (3 - priority) * 3); - } else { - temp &= ~(0x7 << (4 + (7 - priority) * 3)); - temp |= ipic_info[src].prio_mask << (4 + (7 - priority) * 3); - } - - ipic_write(ipic->regs, ipic_info[src].prio, temp); - - return 0; -} - -void ipic_set_highest_priority(unsigned int irq) -{ - struct ipic *ipic = ipic_from_irq(irq); - unsigned int src = irq - ipic->irq_offset; - u32 temp; - - temp = ipic_read(ipic->regs, IPIC_SICFR); - - /* clear and set HPI */ - temp &= 0x7f000000; - temp |= (src & 0x7f) << 24; - - ipic_write(ipic->regs, IPIC_SICFR, temp); -} - -void ipic_set_default_priority(void) -{ - ipic_set_priority(MPC83xx_IRQ_TSEC1_TX, 0); - ipic_set_priority(MPC83xx_IRQ_TSEC1_RX, 1); - ipic_set_priority(MPC83xx_IRQ_TSEC1_ERROR, 2); - ipic_set_priority(MPC83xx_IRQ_TSEC2_TX, 3); - ipic_set_priority(MPC83xx_IRQ_TSEC2_RX, 4); - ipic_set_priority(MPC83xx_IRQ_TSEC2_ERROR, 5); - ipic_set_priority(MPC83xx_IRQ_USB2_DR, 6); - ipic_set_priority(MPC83xx_IRQ_USB2_MPH, 7); - - ipic_set_priority(MPC83xx_IRQ_UART1, 0); - ipic_set_priority(MPC83xx_IRQ_UART2, 1); - ipic_set_priority(MPC83xx_IRQ_SEC2, 2); - ipic_set_priority(MPC83xx_IRQ_IIC1, 5); - ipic_set_priority(MPC83xx_IRQ_IIC2, 6); - ipic_set_priority(MPC83xx_IRQ_SPI, 7); - ipic_set_priority(MPC83xx_IRQ_RTC_SEC, 0); - ipic_set_priority(MPC83xx_IRQ_PIT, 1); - ipic_set_priority(MPC83xx_IRQ_PCI1, 2); - ipic_set_priority(MPC83xx_IRQ_PCI2, 3); - ipic_set_priority(MPC83xx_IRQ_EXT0, 4); - ipic_set_priority(MPC83xx_IRQ_EXT1, 5); - ipic_set_priority(MPC83xx_IRQ_EXT2, 6); - ipic_set_priority(MPC83xx_IRQ_EXT3, 7); - ipic_set_priority(MPC83xx_IRQ_RTC_ALR, 0); - ipic_set_priority(MPC83xx_IRQ_MU, 1); - ipic_set_priority(MPC83xx_IRQ_SBA, 2); - ipic_set_priority(MPC83xx_IRQ_DMA, 3); - ipic_set_priority(MPC83xx_IRQ_EXT4, 4); - ipic_set_priority(MPC83xx_IRQ_EXT5, 5); - ipic_set_priority(MPC83xx_IRQ_EXT6, 6); - ipic_set_priority(MPC83xx_IRQ_EXT7, 7); -} - -void ipic_enable_mcp(enum ipic_mcp_irq mcp_irq) -{ - struct ipic *ipic = primary_ipic; - u32 temp; - - temp = ipic_read(ipic->regs, IPIC_SERMR); - temp |= (1 << (31 - mcp_irq)); - ipic_write(ipic->regs, IPIC_SERMR, temp); -} - -void ipic_disable_mcp(enum ipic_mcp_irq mcp_irq) -{ - struct ipic *ipic = primary_ipic; - u32 temp; - - temp = ipic_read(ipic->regs, IPIC_SERMR); - temp &= (1 << (31 - mcp_irq)); - ipic_write(ipic->regs, IPIC_SERMR, temp); -} - -u32 ipic_get_mcp_status(void) -{ - return ipic_read(primary_ipic->regs, IPIC_SERMR); -} - -void ipic_clear_mcp_status(u32 mask) -{ - ipic_write(primary_ipic->regs, IPIC_SERMR, mask); -} - -/* Return an interrupt vector or -1 if no interrupt is pending. */ -int ipic_get_irq(void) -{ - int irq; - - irq = ipic_read(primary_ipic->regs, IPIC_SIVCR) & 0x7f; - - if (irq == 0) /* 0 --> no irq is pending */ - irq = -1; - - return irq; -} - -static struct sysdev_class ipic_sysclass = { - .name = "ipic", -}; - -static struct sys_device device_ipic = { - .id = 0, - .cls = &ipic_sysclass, -}; - -static int __init init_ipic_sysfs(void) -{ - int rc; - - if (!primary_ipic->regs) - return -ENODEV; - printk(KERN_DEBUG "Registering ipic with sysfs...\n"); - - rc = sysdev_class_register(&ipic_sysclass); - if (rc) { - printk(KERN_ERR "Failed registering ipic sys class\n"); - return -ENODEV; - } - rc = sysdev_register(&device_ipic); - if (rc) { - printk(KERN_ERR "Failed registering ipic sys device\n"); - return -ENODEV; - } - return 0; -} - -subsys_initcall(init_ipic_sysfs); diff --git a/arch/ppc/syslib/ipic.h b/arch/ppc/syslib/ipic.h deleted file mode 100644 index a60c9d18bb7f..000000000000 --- a/arch/ppc/syslib/ipic.h +++ /dev/null @@ -1,47 +0,0 @@ -/* - * IPIC private definitions and structure. - * - * Maintainer: Kumar Gala <galak@kernel.crashing.org> - * - * Copyright 2005 Freescale Semiconductor, Inc - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#ifndef __IPIC_H__ -#define __IPIC_H__ - -#include <asm/ipic.h> - -#define MPC83xx_IPIC_SIZE (0x00100) - -/* System Global Interrupt Configuration Register */ -#define SICFR_IPSA 0x00010000 -#define SICFR_IPSD 0x00080000 -#define SICFR_MPSA 0x00200000 -#define SICFR_MPSB 0x00400000 - -/* System External Interrupt Mask Register */ -#define SEMSR_SIRQ0 0x00008000 - -/* System Error Control Register */ -#define SERCR_MCPR 0x00000001 - -struct ipic { - volatile u32 __iomem *regs; - unsigned int irq_offset; -}; - -struct ipic_info { - u8 pend; /* pending register offset from base */ - u8 mask; /* mask register offset from base */ - u8 prio; /* priority register offset from base */ - u8 force; /* force register offset from base */ - u8 bit; /* register bit position (as per doc) - bit mask = 1 << (31 - bit) */ - u8 prio_mask; /* priority mask value */ -}; - -#endif /* __IPIC_H__ */ diff --git a/arch/ppc/syslib/mpc52xx_pic.c b/arch/ppc/syslib/mpc52xx_pic.c index af35a316544a..f58149c03b0f 100644 --- a/arch/ppc/syslib/mpc52xx_pic.c +++ b/arch/ppc/syslib/mpc52xx_pic.c @@ -20,7 +20,6 @@ #include <linux/init.h> #include <linux/sched.h> #include <linux/signal.h> -#include <linux/stddef.h> #include <linux/delay.h> #include <linux/irq.h> diff --git a/arch/ppc/syslib/mpc52xx_setup.c b/arch/ppc/syslib/mpc52xx_setup.c index ecfa2c0f8ba3..9f504fc7693e 100644 --- a/arch/ppc/syslib/mpc52xx_setup.c +++ b/arch/ppc/syslib/mpc52xx_setup.c @@ -16,6 +16,7 @@ */ +#include <linux/spinlock.h> #include <asm/io.h> #include <asm/time.h> #include <asm/mpc52xx.h> @@ -275,3 +276,38 @@ int mpc52xx_match_psc_function(int psc_idx, const char *func) return 0; } + +int mpc52xx_set_psc_clkdiv(int psc_id, int clkdiv) +{ + static spinlock_t lock = SPIN_LOCK_UNLOCKED; + struct mpc52xx_cdm __iomem *cdm; + unsigned long flags; + u16 mclken_div; + u16 __iomem *reg; + u32 mask; + + cdm = ioremap(MPC52xx_PA(MPC52xx_CDM_OFFSET), MPC52xx_CDM_SIZE); + if (!cdm) { + printk(KERN_ERR __FILE__ ": Error mapping CDM\n"); + return -ENODEV; + } + + mclken_div = 0x8000 | (clkdiv & 0x1FF); + switch (psc_id) { + case 1: reg = &cdm->mclken_div_psc1; mask = 0x20; break; + case 2: reg = &cdm->mclken_div_psc2; mask = 0x40; break; + case 3: reg = &cdm->mclken_div_psc3; mask = 0x80; break; + case 6: reg = &cdm->mclken_div_psc6; mask = 0x10; break; + default: + return -ENODEV; + } + + /* Set the rate and enable the clock */ + spin_lock_irqsave(&lock, flags); + out_be16(reg, mclken_div); + out_be32(&cdm->clk_enables, in_be32(&cdm->clk_enables) | mask); + spin_unlock_irqrestore(&lock, flags); + + iounmap(cdm); + return 0; +} diff --git a/arch/ppc/syslib/mpc83xx_devices.c b/arch/ppc/syslib/mpc83xx_devices.c deleted file mode 100644 index 5c4932ca8e9b..000000000000 --- a/arch/ppc/syslib/mpc83xx_devices.c +++ /dev/null @@ -1,251 +0,0 @@ -/* - * MPC83xx Device descriptions - * - * Maintainer: Kumar Gala <galak@kernel.crashing.org> - * - * Copyright 2005 Freescale Semiconductor Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/device.h> -#include <linux/serial_8250.h> -#include <linux/fsl_devices.h> -#include <asm/mpc83xx.h> -#include <asm/irq.h> -#include <asm/ppc_sys.h> -#include <asm/machdep.h> - -/* We use offsets for IORESOURCE_MEM since we do not know at compile time - * what IMMRBAR is, will get fixed up by mach_mpc83xx_fixup - */ - -struct gianfar_mdio_data mpc83xx_mdio_pdata = { -}; - -static struct gianfar_platform_data mpc83xx_tsec1_pdata = { - .device_flags = FSL_GIANFAR_DEV_HAS_GIGABIT | - FSL_GIANFAR_DEV_HAS_COALESCE | FSL_GIANFAR_DEV_HAS_RMON | - FSL_GIANFAR_DEV_HAS_MULTI_INTR, -}; - -static struct gianfar_platform_data mpc83xx_tsec2_pdata = { - .device_flags = FSL_GIANFAR_DEV_HAS_GIGABIT | - FSL_GIANFAR_DEV_HAS_COALESCE | FSL_GIANFAR_DEV_HAS_RMON | - FSL_GIANFAR_DEV_HAS_MULTI_INTR, -}; - -static struct fsl_i2c_platform_data mpc83xx_fsl_i2c1_pdata = { - .device_flags = FSL_I2C_DEV_SEPARATE_DFSRR, -}; - -static struct fsl_i2c_platform_data mpc83xx_fsl_i2c2_pdata = { - .device_flags = FSL_I2C_DEV_SEPARATE_DFSRR, -}; - -static struct plat_serial8250_port serial_platform_data[] = { - [0] = { - .mapbase = 0x4500, - .irq = MPC83xx_IRQ_UART1, - .iotype = UPIO_MEM, - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, - }, - [1] = { - .mapbase = 0x4600, - .irq = MPC83xx_IRQ_UART2, - .iotype = UPIO_MEM, - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, - }, - { }, -}; - -struct platform_device ppc_sys_platform_devices[] = { - [MPC83xx_TSEC1] = { - .name = "fsl-gianfar", - .id = 1, - .dev.platform_data = &mpc83xx_tsec1_pdata, - .num_resources = 4, - .resource = (struct resource[]) { - { - .start = 0x24000, - .end = 0x24fff, - .flags = IORESOURCE_MEM, - }, - { - .name = "tx", - .start = MPC83xx_IRQ_TSEC1_TX, - .end = MPC83xx_IRQ_TSEC1_TX, - .flags = IORESOURCE_IRQ, - }, - { - .name = "rx", - .start = MPC83xx_IRQ_TSEC1_RX, - .end = MPC83xx_IRQ_TSEC1_RX, - .flags = IORESOURCE_IRQ, - }, - { - .name = "error", - .start = MPC83xx_IRQ_TSEC1_ERROR, - .end = MPC83xx_IRQ_TSEC1_ERROR, - .flags = IORESOURCE_IRQ, - }, - }, - }, - [MPC83xx_TSEC2] = { - .name = "fsl-gianfar", - .id = 2, - .dev.platform_data = &mpc83xx_tsec2_pdata, - .num_resources = 4, - .resource = (struct resource[]) { - { - .start = 0x25000, - .end = 0x25fff, - .flags = IORESOURCE_MEM, - }, - { - .name = "tx", - .start = MPC83xx_IRQ_TSEC2_TX, - .end = MPC83xx_IRQ_TSEC2_TX, - .flags = IORESOURCE_IRQ, - }, - { - .name = "rx", - .start = MPC83xx_IRQ_TSEC2_RX, - .end = MPC83xx_IRQ_TSEC2_RX, - .flags = IORESOURCE_IRQ, - }, - { - .name = "error", - .start = MPC83xx_IRQ_TSEC2_ERROR, - .end = MPC83xx_IRQ_TSEC2_ERROR, - .flags = IORESOURCE_IRQ, - }, - }, - }, - [MPC83xx_IIC1] = { - .name = "fsl-i2c", - .id = 1, - .dev.platform_data = &mpc83xx_fsl_i2c1_pdata, - .num_resources = 2, - .resource = (struct resource[]) { - { - .start = 0x3000, - .end = 0x30ff, - .flags = IORESOURCE_MEM, - }, - { - .start = MPC83xx_IRQ_IIC1, - .end = MPC83xx_IRQ_IIC1, - .flags = IORESOURCE_IRQ, - }, - }, - }, - [MPC83xx_IIC2] = { - .name = "fsl-i2c", - .id = 2, - .dev.platform_data = &mpc83xx_fsl_i2c2_pdata, - .num_resources = 2, - .resource = (struct resource[]) { - { - .start = 0x3100, - .end = 0x31ff, - .flags = IORESOURCE_MEM, - }, - { - .start = MPC83xx_IRQ_IIC2, - .end = MPC83xx_IRQ_IIC2, - .flags = IORESOURCE_IRQ, - }, - }, - }, - [MPC83xx_DUART] = { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM, - .dev.platform_data = serial_platform_data, - }, - [MPC83xx_SEC2] = { - .name = "fsl-sec2", - .id = 1, - .num_resources = 2, - .resource = (struct resource[]) { - { - .start = 0x30000, - .end = 0x3ffff, - .flags = IORESOURCE_MEM, - }, - { - .start = MPC83xx_IRQ_SEC2, - .end = MPC83xx_IRQ_SEC2, - .flags = IORESOURCE_IRQ, - }, - }, - }, - [MPC83xx_USB2_DR] = { - .name = "fsl-ehci", - .id = 1, - .num_resources = 2, - .resource = (struct resource[]) { - { - .start = 0x23000, - .end = 0x23fff, - .flags = IORESOURCE_MEM, - }, - { - .start = MPC83xx_IRQ_USB2_DR, - .end = MPC83xx_IRQ_USB2_DR, - .flags = IORESOURCE_IRQ, - }, - }, - }, - [MPC83xx_USB2_MPH] = { - .name = "fsl-ehci", - .id = 2, - .num_resources = 2, - .resource = (struct resource[]) { - { - .start = 0x22000, - .end = 0x22fff, - .flags = IORESOURCE_MEM, - }, - { - .start = MPC83xx_IRQ_USB2_MPH, - .end = MPC83xx_IRQ_USB2_MPH, - .flags = IORESOURCE_IRQ, - }, - }, - }, - [MPC83xx_MDIO] = { - .name = "fsl-gianfar_mdio", - .id = 0, - .dev.platform_data = &mpc83xx_mdio_pdata, - .num_resources = 1, - .resource = (struct resource[]) { - { - .start = 0x24520, - .end = 0x2453f, - .flags = IORESOURCE_MEM, - }, - }, - }, -}; - -static int __init mach_mpc83xx_fixup(struct platform_device *pdev) -{ - ppc_sys_fixup_mem_resource(pdev, immrbar); - return 0; -} - -static int __init mach_mpc83xx_init(void) -{ - if (ppc_md.progress) - ppc_md.progress("mach_mpc83xx_init:enter", 0); - ppc_sys_device_fixup = mach_mpc83xx_fixup; - return 0; -} - -postcore_initcall(mach_mpc83xx_init); diff --git a/arch/ppc/syslib/mpc83xx_sys.c b/arch/ppc/syslib/mpc83xx_sys.c deleted file mode 100644 index 0498ae7e01e3..000000000000 --- a/arch/ppc/syslib/mpc83xx_sys.c +++ /dev/null @@ -1,122 +0,0 @@ -/* - * MPC83xx System descriptions - * - * Maintainer: Kumar Gala <galak@kernel.crashing.org> - * - * Copyright 2005 Freescale Semiconductor Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/device.h> -#include <asm/ppc_sys.h> - -struct ppc_sys_spec *cur_ppc_sys_spec; -struct ppc_sys_spec ppc_sys_specs[] = { - { - .ppc_sys_name = "8349E", - .mask = 0xFFFF0000, - .value = 0x80500000, - .num_devices = 9, - .device_list = (enum ppc_sys_devices[]) - { - MPC83xx_TSEC1, MPC83xx_TSEC2, MPC83xx_IIC1, - MPC83xx_IIC2, MPC83xx_DUART, MPC83xx_SEC2, - MPC83xx_USB2_DR, MPC83xx_USB2_MPH, MPC83xx_MDIO - }, - }, - { - .ppc_sys_name = "8349", - .mask = 0xFFFF0000, - .value = 0x80510000, - .num_devices = 8, - .device_list = (enum ppc_sys_devices[]) - { - MPC83xx_TSEC1, MPC83xx_TSEC2, MPC83xx_IIC1, - MPC83xx_IIC2, MPC83xx_DUART, - MPC83xx_USB2_DR, MPC83xx_USB2_MPH, MPC83xx_MDIO - }, - }, - { - .ppc_sys_name = "8347E", - .mask = 0xFFFF0000, - .value = 0x80520000, - .num_devices = 9, - .device_list = (enum ppc_sys_devices[]) - { - MPC83xx_TSEC1, MPC83xx_TSEC2, MPC83xx_IIC1, - MPC83xx_IIC2, MPC83xx_DUART, MPC83xx_SEC2, - MPC83xx_USB2_DR, MPC83xx_USB2_MPH, MPC83xx_MDIO - }, - }, - { - .ppc_sys_name = "8347", - .mask = 0xFFFF0000, - .value = 0x80530000, - .num_devices = 8, - .device_list = (enum ppc_sys_devices[]) - { - MPC83xx_TSEC1, MPC83xx_TSEC2, MPC83xx_IIC1, - MPC83xx_IIC2, MPC83xx_DUART, - MPC83xx_USB2_DR, MPC83xx_USB2_MPH, MPC83xx_MDIO - }, - }, - { - .ppc_sys_name = "8347E", - .mask = 0xFFFF0000, - .value = 0x80540000, - .num_devices = 9, - .device_list = (enum ppc_sys_devices[]) - { - MPC83xx_TSEC1, MPC83xx_TSEC2, MPC83xx_IIC1, - MPC83xx_IIC2, MPC83xx_DUART, MPC83xx_SEC2, - MPC83xx_USB2_DR, MPC83xx_USB2_MPH, MPC83xx_MDIO - }, - }, - { - .ppc_sys_name = "8347", - .mask = 0xFFFF0000, - .value = 0x80550000, - .num_devices = 8, - .device_list = (enum ppc_sys_devices[]) - { - MPC83xx_TSEC1, MPC83xx_TSEC2, MPC83xx_IIC1, - MPC83xx_IIC2, MPC83xx_DUART, - MPC83xx_USB2_DR, MPC83xx_USB2_MPH, MPC83xx_MDIO - }, - }, - { - .ppc_sys_name = "8343E", - .mask = 0xFFFF0000, - .value = 0x80560000, - .num_devices = 8, - .device_list = (enum ppc_sys_devices[]) - { - MPC83xx_TSEC1, MPC83xx_TSEC2, MPC83xx_IIC1, - MPC83xx_IIC2, MPC83xx_DUART, MPC83xx_SEC2, - MPC83xx_USB2_DR, MPC83xx_MDIO - }, - }, - { - .ppc_sys_name = "8343", - .mask = 0xFFFF0000, - .value = 0x80570000, - .num_devices = 7, - .device_list = (enum ppc_sys_devices[]) - { - MPC83xx_TSEC1, MPC83xx_TSEC2, MPC83xx_IIC1, - MPC83xx_IIC2, MPC83xx_DUART, - MPC83xx_USB2_DR, MPC83xx_MDIO - }, - }, - { /* default match */ - .ppc_sys_name = "", - .mask = 0x00000000, - .value = 0x00000000, - }, -}; diff --git a/arch/ppc/syslib/mpc85xx_devices.c b/arch/ppc/syslib/mpc85xx_devices.c deleted file mode 100644 index 325136e5aee0..000000000000 --- a/arch/ppc/syslib/mpc85xx_devices.c +++ /dev/null @@ -1,826 +0,0 @@ -/* - * MPC85xx Device descriptions - * - * Maintainer: Kumar Gala <galak@kernel.crashing.org> - * - * Copyright 2005 Freescale Semiconductor Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/device.h> -#include <linux/serial_8250.h> -#include <linux/fsl_devices.h> -#include <linux/fs_enet_pd.h> -#include <asm/mpc85xx.h> -#include <asm/irq.h> -#include <asm/ppc_sys.h> -#include <asm/cpm2.h> - -/* We use offsets for IORESOURCE_MEM since we do not know at compile time - * what CCSRBAR is, will get fixed up by mach_mpc85xx_fixup - */ -struct gianfar_mdio_data mpc85xx_mdio_pdata = { -}; - -static struct gianfar_platform_data mpc85xx_tsec1_pdata = { - .device_flags = FSL_GIANFAR_DEV_HAS_GIGABIT | - FSL_GIANFAR_DEV_HAS_COALESCE | FSL_GIANFAR_DEV_HAS_RMON | - FSL_GIANFAR_DEV_HAS_MULTI_INTR, -}; - -static struct gianfar_platform_data mpc85xx_tsec2_pdata = { - .device_flags = FSL_GIANFAR_DEV_HAS_GIGABIT | - FSL_GIANFAR_DEV_HAS_COALESCE | FSL_GIANFAR_DEV_HAS_RMON | - FSL_GIANFAR_DEV_HAS_MULTI_INTR, -}; - -static struct gianfar_platform_data mpc85xx_etsec1_pdata = { - .device_flags = FSL_GIANFAR_DEV_HAS_GIGABIT | - FSL_GIANFAR_DEV_HAS_COALESCE | FSL_GIANFAR_DEV_HAS_RMON | - FSL_GIANFAR_DEV_HAS_MULTI_INTR | - FSL_GIANFAR_DEV_HAS_CSUM | FSL_GIANFAR_DEV_HAS_VLAN | - FSL_GIANFAR_DEV_HAS_EXTENDED_HASH, -}; - -static struct gianfar_platform_data mpc85xx_etsec2_pdata = { - .device_flags = FSL_GIANFAR_DEV_HAS_GIGABIT | - FSL_GIANFAR_DEV_HAS_COALESCE | FSL_GIANFAR_DEV_HAS_RMON | - FSL_GIANFAR_DEV_HAS_MULTI_INTR | - FSL_GIANFAR_DEV_HAS_CSUM | FSL_GIANFAR_DEV_HAS_VLAN | - FSL_GIANFAR_DEV_HAS_EXTENDED_HASH, -}; - -static struct gianfar_platform_data mpc85xx_etsec3_pdata = { - .device_flags = FSL_GIANFAR_DEV_HAS_GIGABIT | - FSL_GIANFAR_DEV_HAS_COALESCE | FSL_GIANFAR_DEV_HAS_RMON | - FSL_GIANFAR_DEV_HAS_MULTI_INTR | - FSL_GIANFAR_DEV_HAS_CSUM | FSL_GIANFAR_DEV_HAS_VLAN | - FSL_GIANFAR_DEV_HAS_EXTENDED_HASH, -}; - -static struct gianfar_platform_data mpc85xx_etsec4_pdata = { - .device_flags = FSL_GIANFAR_DEV_HAS_GIGABIT | - FSL_GIANFAR_DEV_HAS_COALESCE | FSL_GIANFAR_DEV_HAS_RMON | - FSL_GIANFAR_DEV_HAS_MULTI_INTR | - FSL_GIANFAR_DEV_HAS_CSUM | FSL_GIANFAR_DEV_HAS_VLAN | - FSL_GIANFAR_DEV_HAS_EXTENDED_HASH, -}; - -static struct gianfar_platform_data mpc85xx_fec_pdata = { - .device_flags = 0, -}; - -static struct fsl_i2c_platform_data mpc85xx_fsl_i2c_pdata = { - .device_flags = FSL_I2C_DEV_SEPARATE_DFSRR, -}; - -static struct fsl_i2c_platform_data mpc85xx_fsl_i2c2_pdata = { - .device_flags = FSL_I2C_DEV_SEPARATE_DFSRR, -}; - -static struct fs_platform_info mpc85xx_fcc1_pdata = { - .fs_no = fsid_fcc1, - .cp_page = CPM_CR_FCC1_PAGE, - .cp_block = CPM_CR_FCC1_SBLOCK, - - .rx_ring = 32, - .tx_ring = 32, - .rx_copybreak = 240, - .use_napi = 0, - .napi_weight = 17, - - .clk_mask = CMX1_CLK_MASK, - .clk_route = CMX1_CLK_ROUTE, - .clk_trx = (PC_F1RXCLK | PC_F1TXCLK), - - .mem_offset = FCC1_MEM_OFFSET, -}; - -static struct fs_platform_info mpc85xx_fcc2_pdata = { - .fs_no = fsid_fcc2, - .cp_page = CPM_CR_FCC2_PAGE, - .cp_block = CPM_CR_FCC2_SBLOCK, - - .rx_ring = 32, - .tx_ring = 32, - .rx_copybreak = 240, - .use_napi = 0, - .napi_weight = 17, - - .clk_mask = CMX2_CLK_MASK, - .clk_route = CMX2_CLK_ROUTE, - .clk_trx = (PC_F2RXCLK | PC_F2TXCLK), - - .mem_offset = FCC2_MEM_OFFSET, -}; - -static struct fs_platform_info mpc85xx_fcc3_pdata = { - .fs_no = fsid_fcc3, - .cp_page = CPM_CR_FCC3_PAGE, - .cp_block = CPM_CR_FCC3_SBLOCK, - - .rx_ring = 32, - .tx_ring = 32, - .rx_copybreak = 240, - .use_napi = 0, - .napi_weight = 17, - - .clk_mask = CMX3_CLK_MASK, - .clk_route = CMX3_CLK_ROUTE, - .clk_trx = (PC_F3RXCLK | PC_F3TXCLK), - - .mem_offset = FCC3_MEM_OFFSET, -}; - -static struct plat_serial8250_port serial_platform_data[] = { - [0] = { - .mapbase = 0x4500, - .irq = MPC85xx_IRQ_DUART, - .iotype = UPIO_MEM, - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ, - }, - [1] = { - .mapbase = 0x4600, - .irq = MPC85xx_IRQ_DUART, - .iotype = UPIO_MEM, - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ, - }, - { }, -}; - -struct platform_device ppc_sys_platform_devices[] = { - [MPC85xx_TSEC1] = { - .name = "fsl-gianfar", - .id = 1, - .dev.platform_data = &mpc85xx_tsec1_pdata, - .num_resources = 4, - .resource = (struct resource[]) { - { - .start = MPC85xx_ENET1_OFFSET, - .end = MPC85xx_ENET1_OFFSET + - MPC85xx_ENET1_SIZE - 1, - .flags = IORESOURCE_MEM, - }, - { - .name = "tx", - .start = MPC85xx_IRQ_TSEC1_TX, - .end = MPC85xx_IRQ_TSEC1_TX, - .flags = IORESOURCE_IRQ, - }, - { - .name = "rx", - .start = MPC85xx_IRQ_TSEC1_RX, - .end = MPC85xx_IRQ_TSEC1_RX, - .flags = IORESOURCE_IRQ, - }, - { - .name = "error", - .start = MPC85xx_IRQ_TSEC1_ERROR, - .end = MPC85xx_IRQ_TSEC1_ERROR, - .flags = IORESOURCE_IRQ, - }, - }, - }, - [MPC85xx_TSEC2] = { - .name = "fsl-gianfar", - .id = 2, - .dev.platform_data = &mpc85xx_tsec2_pdata, - .num_resources = 4, - .resource = (struct resource[]) { - { - .start = MPC85xx_ENET2_OFFSET, - .end = MPC85xx_ENET2_OFFSET + - MPC85xx_ENET2_SIZE - 1, - .flags = IORESOURCE_MEM, - }, - { - .name = "tx", - .start = MPC85xx_IRQ_TSEC2_TX, - .end = MPC85xx_IRQ_TSEC2_TX, - .flags = IORESOURCE_IRQ, - }, - { - .name = "rx", - .start = MPC85xx_IRQ_TSEC2_RX, - .end = MPC85xx_IRQ_TSEC2_RX, - .flags = IORESOURCE_IRQ, - }, - { - .name = "error", - .start = MPC85xx_IRQ_TSEC2_ERROR, - .end = MPC85xx_IRQ_TSEC2_ERROR, - .flags = IORESOURCE_IRQ, - }, - }, - }, - [MPC85xx_FEC] = { - .name = "fsl-gianfar", - .id = 3, - .dev.platform_data = &mpc85xx_fec_pdata, - .num_resources = 2, - .resource = (struct resource[]) { - { - .start = MPC85xx_ENET3_OFFSET, - .end = MPC85xx_ENET3_OFFSET + - MPC85xx_ENET3_SIZE - 1, - .flags = IORESOURCE_MEM, - - }, - { - .start = MPC85xx_IRQ_FEC, - .end = MPC85xx_IRQ_FEC, - .flags = IORESOURCE_IRQ, - }, - }, - }, - [MPC85xx_IIC1] = { - .name = "fsl-i2c", - .id = 1, - .dev.platform_data = &mpc85xx_fsl_i2c_pdata, - .num_resources = 2, - .resource = (struct resource[]) { - { - .start = MPC85xx_IIC1_OFFSET, - .end = MPC85xx_IIC1_OFFSET + - MPC85xx_IIC1_SIZE - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = MPC85xx_IRQ_IIC1, - .end = MPC85xx_IRQ_IIC1, - .flags = IORESOURCE_IRQ, - }, - }, - }, - [MPC85xx_DMA0] = { - .name = "fsl-dma", - .id = 0, - .num_resources = 2, - .resource = (struct resource[]) { - { - .start = MPC85xx_DMA0_OFFSET, - .end = MPC85xx_DMA0_OFFSET + - MPC85xx_DMA0_SIZE - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = MPC85xx_IRQ_DMA0, - .end = MPC85xx_IRQ_DMA0, - .flags = IORESOURCE_IRQ, - }, - }, - }, - [MPC85xx_DMA1] = { - .name = "fsl-dma", - .id = 1, - .num_resources = 2, - .resource = (struct resource[]) { - { - .start = MPC85xx_DMA1_OFFSET, - .end = MPC85xx_DMA1_OFFSET + - MPC85xx_DMA1_SIZE - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = MPC85xx_IRQ_DMA1, - .end = MPC85xx_IRQ_DMA1, - .flags = IORESOURCE_IRQ, - }, - }, - }, - [MPC85xx_DMA2] = { - .name = "fsl-dma", - .id = 2, - .num_resources = 2, - .resource = (struct resource[]) { - { - .start = MPC85xx_DMA2_OFFSET, - .end = MPC85xx_DMA2_OFFSET + - MPC85xx_DMA2_SIZE - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = MPC85xx_IRQ_DMA2, - .end = MPC85xx_IRQ_DMA2, - .flags = IORESOURCE_IRQ, - }, - }, - }, - [MPC85xx_DMA3] = { - .name = "fsl-dma", - .id = 3, - .num_resources = 2, - .resource = (struct resource[]) { - { - .start = MPC85xx_DMA3_OFFSET, - .end = MPC85xx_DMA3_OFFSET + - MPC85xx_DMA3_SIZE - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = MPC85xx_IRQ_DMA3, - .end = MPC85xx_IRQ_DMA3, - .flags = IORESOURCE_IRQ, - }, - }, - }, - [MPC85xx_DUART] = { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM, - .dev.platform_data = serial_platform_data, - }, - [MPC85xx_PERFMON] = { - .name = "fsl-perfmon", - .id = 1, - .num_resources = 2, - .resource = (struct resource[]) { - { - .start = MPC85xx_PERFMON_OFFSET, - .end = MPC85xx_PERFMON_OFFSET + - MPC85xx_PERFMON_SIZE - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = MPC85xx_IRQ_PERFMON, - .end = MPC85xx_IRQ_PERFMON, - .flags = IORESOURCE_IRQ, - }, - }, - }, - [MPC85xx_SEC2] = { - .name = "fsl-sec2", - .id = 1, - .num_resources = 2, - .resource = (struct resource[]) { - { - .start = MPC85xx_SEC2_OFFSET, - .end = MPC85xx_SEC2_OFFSET + - MPC85xx_SEC2_SIZE - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = MPC85xx_IRQ_SEC2, - .end = MPC85xx_IRQ_SEC2, - .flags = IORESOURCE_IRQ, - }, - }, - }, - [MPC85xx_CPM_FCC1] = { - .name = "fsl-cpm-fcc", - .id = 1, - .num_resources = 4, - .dev.platform_data = &mpc85xx_fcc1_pdata, - .resource = (struct resource[]) { - { - .name = "fcc_regs", - .start = 0x91300, - .end = 0x9131F, - .flags = IORESOURCE_MEM, - }, - { - .name = "fcc_regs_c", - .start = 0x91380, - .end = 0x9139F, - .flags = IORESOURCE_MEM, - }, - { - .name = "fcc_pram", - .start = 0x88400, - .end = 0x884ff, - .flags = IORESOURCE_MEM, - }, - { - .start = SIU_INT_FCC1, - .end = SIU_INT_FCC1, - .flags = IORESOURCE_IRQ, - }, - }, - }, - [MPC85xx_CPM_FCC2] = { - .name = "fsl-cpm-fcc", - .id = 2, - .num_resources = 4, - .dev.platform_data = &mpc85xx_fcc2_pdata, - .resource = (struct resource[]) { - { - .name = "fcc_regs", - .start = 0x91320, - .end = 0x9133F, - .flags = IORESOURCE_MEM, - }, - { - .name = "fcc_regs_c", - .start = 0x913A0, - .end = 0x913CF, - .flags = IORESOURCE_MEM, - }, - { - .name = "fcc_pram", - .start = 0x88500, - .end = 0x885ff, - .flags = IORESOURCE_MEM, - }, - { - .start = SIU_INT_FCC2, - .end = SIU_INT_FCC2, - .flags = IORESOURCE_IRQ, - }, - }, - }, - [MPC85xx_CPM_FCC3] = { - .name = "fsl-cpm-fcc", - .id = 3, - .num_resources = 4, - .dev.platform_data = &mpc85xx_fcc3_pdata, - .resource = (struct resource[]) { - { - .name = "fcc_regs", - .start = 0x91340, - .end = 0x9135F, - .flags = IORESOURCE_MEM, - }, - { - .name = "fcc_regs_c", - .start = 0x913D0, - .end = 0x913FF, - .flags = IORESOURCE_MEM, - }, - { - .name = "fcc_pram", - .start = 0x88600, - .end = 0x886ff, - .flags = IORESOURCE_MEM, - }, - { - .start = SIU_INT_FCC3, - .end = SIU_INT_FCC3, - .flags = IORESOURCE_IRQ, - }, - }, - }, - [MPC85xx_CPM_I2C] = { - .name = "fsl-cpm-i2c", - .id = 1, - .num_resources = 2, - .resource = (struct resource[]) { - { - .start = 0x91860, - .end = 0x918BF, - .flags = IORESOURCE_MEM, - }, - { - .start = SIU_INT_I2C, - .end = SIU_INT_I2C, - .flags = IORESOURCE_IRQ, - }, - }, - }, - [MPC85xx_CPM_SCC1] = { - .name = "fsl-cpm-scc", - .id = 1, - .num_resources = 2, - .resource = (struct resource[]) { - { - .start = 0x91A00, - .end = 0x91A1F, - .flags = IORESOURCE_MEM, - }, - { - .start = SIU_INT_SCC1, - .end = SIU_INT_SCC1, - .flags = IORESOURCE_IRQ, - }, - }, - }, - [MPC85xx_CPM_SCC2] = { - .name = "fsl-cpm-scc", - .id = 2, - .num_resources = 2, - .resource = (struct resource[]) { - { - .start = 0x91A20, - .end = 0x91A3F, - .flags = IORESOURCE_MEM, - }, - { - .start = SIU_INT_SCC2, - .end = SIU_INT_SCC2, - .flags = IORESOURCE_IRQ, - }, - }, - }, - [MPC85xx_CPM_SCC3] = { - .name = "fsl-cpm-scc", - .id = 3, - .num_resources = 2, - .resource = (struct resource[]) { - { - .start = 0x91A40, - .end = 0x91A5F, - .flags = IORESOURCE_MEM, - }, - { - .start = SIU_INT_SCC3, - .end = SIU_INT_SCC3, - .flags = IORESOURCE_IRQ, - }, - }, - }, - [MPC85xx_CPM_SCC4] = { - .name = "fsl-cpm-scc", - .id = 4, - .num_resources = 2, - .resource = (struct resource[]) { - { - .start = 0x91A60, - .end = 0x91A7F, - .flags = IORESOURCE_MEM, - }, - { - .start = SIU_INT_SCC4, - .end = SIU_INT_SCC4, - .flags = IORESOURCE_IRQ, - }, - }, - }, - [MPC85xx_CPM_SPI] = { - .name = "fsl-cpm-spi", - .id = 1, - .num_resources = 2, - .resource = (struct resource[]) { - { - .start = 0x91AA0, - .end = 0x91AFF, - .flags = IORESOURCE_MEM, - }, - { - .start = SIU_INT_SPI, - .end = SIU_INT_SPI, - .flags = IORESOURCE_IRQ, - }, - }, - }, - [MPC85xx_CPM_MCC1] = { - .name = "fsl-cpm-mcc", - .id = 1, - .num_resources = 2, - .resource = (struct resource[]) { - { - .start = 0x91B30, - .end = 0x91B3F, - .flags = IORESOURCE_MEM, - }, - { - .start = SIU_INT_MCC1, - .end = SIU_INT_MCC1, - .flags = IORESOURCE_IRQ, - }, - }, - }, - [MPC85xx_CPM_MCC2] = { - .name = "fsl-cpm-mcc", - .id = 2, - .num_resources = 2, - .resource = (struct resource[]) { - { - .start = 0x91B50, - .end = 0x91B5F, - .flags = IORESOURCE_MEM, - }, - { - .start = SIU_INT_MCC2, - .end = SIU_INT_MCC2, - .flags = IORESOURCE_IRQ, - }, - }, - }, - [MPC85xx_CPM_SMC1] = { - .name = "fsl-cpm-smc", - .id = 1, - .num_resources = 2, - .resource = (struct resource[]) { - { - .start = 0x91A80, - .end = 0x91A8F, - .flags = IORESOURCE_MEM, - }, - { - .start = SIU_INT_SMC1, - .end = SIU_INT_SMC1, - .flags = IORESOURCE_IRQ, - }, - }, - }, - [MPC85xx_CPM_SMC2] = { - .name = "fsl-cpm-smc", - .id = 2, - .num_resources = 2, - .resource = (struct resource[]) { - { - .start = 0x91A90, - .end = 0x91A9F, - .flags = IORESOURCE_MEM, - }, - { - .start = SIU_INT_SMC2, - .end = SIU_INT_SMC2, - .flags = IORESOURCE_IRQ, - }, - }, - }, - [MPC85xx_CPM_USB] = { - .name = "fsl-cpm-usb", - .id = 2, - .num_resources = 2, - .resource = (struct resource[]) { - { - .start = 0x91B60, - .end = 0x91B7F, - .flags = IORESOURCE_MEM, - }, - { - .start = SIU_INT_USB, - .end = SIU_INT_USB, - .flags = IORESOURCE_IRQ, - }, - }, - }, - [MPC85xx_eTSEC1] = { - .name = "fsl-gianfar", - .id = 1, - .dev.platform_data = &mpc85xx_etsec1_pdata, - .num_resources = 4, - .resource = (struct resource[]) { - { - .start = MPC85xx_ENET1_OFFSET, - .end = MPC85xx_ENET1_OFFSET + - MPC85xx_ENET1_SIZE - 1, - .flags = IORESOURCE_MEM, - }, - { - .name = "tx", - .start = MPC85xx_IRQ_TSEC1_TX, - .end = MPC85xx_IRQ_TSEC1_TX, - .flags = IORESOURCE_IRQ, - }, - { - .name = "rx", - .start = MPC85xx_IRQ_TSEC1_RX, - .end = MPC85xx_IRQ_TSEC1_RX, - .flags = IORESOURCE_IRQ, - }, - { - .name = "error", - .start = MPC85xx_IRQ_TSEC1_ERROR, - .end = MPC85xx_IRQ_TSEC1_ERROR, - .flags = IORESOURCE_IRQ, - }, - }, - }, - [MPC85xx_eTSEC2] = { - .name = "fsl-gianfar", - .id = 2, - .dev.platform_data = &mpc85xx_etsec2_pdata, - .num_resources = 4, - .resource = (struct resource[]) { - { - .start = MPC85xx_ENET2_OFFSET, - .end = MPC85xx_ENET2_OFFSET + - MPC85xx_ENET2_SIZE - 1, - .flags = IORESOURCE_MEM, - }, - { - .name = "tx", - .start = MPC85xx_IRQ_TSEC2_TX, - .end = MPC85xx_IRQ_TSEC2_TX, - .flags = IORESOURCE_IRQ, - }, - { - .name = "rx", - .start = MPC85xx_IRQ_TSEC2_RX, - .end = MPC85xx_IRQ_TSEC2_RX, - .flags = IORESOURCE_IRQ, - }, - { - .name = "error", - .start = MPC85xx_IRQ_TSEC2_ERROR, - .end = MPC85xx_IRQ_TSEC2_ERROR, - .flags = IORESOURCE_IRQ, - }, - }, - }, - [MPC85xx_eTSEC3] = { - .name = "fsl-gianfar", - .id = 3, - .dev.platform_data = &mpc85xx_etsec3_pdata, - .num_resources = 4, - .resource = (struct resource[]) { - { - .start = MPC85xx_ENET3_OFFSET, - .end = MPC85xx_ENET3_OFFSET + - MPC85xx_ENET3_SIZE - 1, - .flags = IORESOURCE_MEM, - }, - { - .name = "tx", - .start = MPC85xx_IRQ_TSEC3_TX, - .end = MPC85xx_IRQ_TSEC3_TX, - .flags = IORESOURCE_IRQ, - }, - { - .name = "rx", - .start = MPC85xx_IRQ_TSEC3_RX, - .end = MPC85xx_IRQ_TSEC3_RX, - .flags = IORESOURCE_IRQ, - }, - { - .name = "error", - .start = MPC85xx_IRQ_TSEC3_ERROR, - .end = MPC85xx_IRQ_TSEC3_ERROR, - .flags = IORESOURCE_IRQ, - }, - }, - }, - [MPC85xx_eTSEC4] = { - .name = "fsl-gianfar", - .id = 4, - .dev.platform_data = &mpc85xx_etsec4_pdata, - .num_resources = 4, - .resource = (struct resource[]) { - { - .start = 0x27000, - .end = 0x27fff, - .flags = IORESOURCE_MEM, - }, - { - .name = "tx", - .start = MPC85xx_IRQ_TSEC4_TX, - .end = MPC85xx_IRQ_TSEC4_TX, - .flags = IORESOURCE_IRQ, - }, - { - .name = "rx", - .start = MPC85xx_IRQ_TSEC4_RX, - .end = MPC85xx_IRQ_TSEC4_RX, - .flags = IORESOURCE_IRQ, - }, - { - .name = "error", - .start = MPC85xx_IRQ_TSEC4_ERROR, - .end = MPC85xx_IRQ_TSEC4_ERROR, - .flags = IORESOURCE_IRQ, - }, - }, - }, - [MPC85xx_IIC2] = { - .name = "fsl-i2c", - .id = 2, - .dev.platform_data = &mpc85xx_fsl_i2c2_pdata, - .num_resources = 2, - .resource = (struct resource[]) { - { - .start = 0x03100, - .end = 0x031ff, - .flags = IORESOURCE_MEM, - }, - { - .start = MPC85xx_IRQ_IIC1, - .end = MPC85xx_IRQ_IIC1, - .flags = IORESOURCE_IRQ, - }, - }, - }, - [MPC85xx_MDIO] = { - .name = "fsl-gianfar_mdio", - .id = 0, - .dev.platform_data = &mpc85xx_mdio_pdata, - .num_resources = 1, - .resource = (struct resource[]) { - { - .start = 0x24520, - .end = 0x2453f, - .flags = IORESOURCE_MEM, - }, - }, - }, -}; - -static int __init mach_mpc85xx_fixup(struct platform_device *pdev) -{ - ppc_sys_fixup_mem_resource(pdev, CCSRBAR); - return 0; -} - -static int __init mach_mpc85xx_init(void) -{ - ppc_sys_device_fixup = mach_mpc85xx_fixup; - return 0; -} - -postcore_initcall(mach_mpc85xx_init); diff --git a/arch/ppc/syslib/mpc85xx_sys.c b/arch/ppc/syslib/mpc85xx_sys.c deleted file mode 100644 index d96a93dbcb5a..000000000000 --- a/arch/ppc/syslib/mpc85xx_sys.c +++ /dev/null @@ -1,233 +0,0 @@ -/* - * MPC85xx System descriptions - * - * Maintainer: Kumar Gala <galak@kernel.crashing.org> - * - * Copyright 2005 Freescale Semiconductor Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/device.h> -#include <asm/ppc_sys.h> - -struct ppc_sys_spec *cur_ppc_sys_spec; -struct ppc_sys_spec ppc_sys_specs[] = { - { - .ppc_sys_name = "8540", - .mask = 0xFFFF0000, - .value = 0x80300000, - .num_devices = 11, - .device_list = (enum ppc_sys_devices[]) - { - MPC85xx_TSEC1, MPC85xx_TSEC2, MPC85xx_FEC, MPC85xx_IIC1, - MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3, - MPC85xx_PERFMON, MPC85xx_DUART, MPC85xx_MDIO, - }, - }, - { - .ppc_sys_name = "8560", - .mask = 0xFFFF0000, - .value = 0x80700000, - .num_devices = 20, - .device_list = (enum ppc_sys_devices[]) - { - MPC85xx_TSEC1, MPC85xx_TSEC2, MPC85xx_IIC1, - MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3, - MPC85xx_PERFMON, - MPC85xx_CPM_SPI, MPC85xx_CPM_I2C, MPC85xx_CPM_SCC1, - MPC85xx_CPM_SCC2, MPC85xx_CPM_SCC3, MPC85xx_CPM_SCC4, - MPC85xx_CPM_FCC1, MPC85xx_CPM_FCC2, MPC85xx_CPM_FCC3, - MPC85xx_CPM_MCC1, MPC85xx_CPM_MCC2, MPC85xx_MDIO, - }, - }, - { - .ppc_sys_name = "8541", - .mask = 0xFFFF0000, - .value = 0x80720000, - .num_devices = 14, - .device_list = (enum ppc_sys_devices[]) - { - MPC85xx_TSEC1, MPC85xx_TSEC2, MPC85xx_IIC1, - MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3, - MPC85xx_PERFMON, MPC85xx_DUART, - MPC85xx_CPM_SPI, MPC85xx_CPM_I2C, - MPC85xx_CPM_FCC1, MPC85xx_CPM_FCC2, - MPC85xx_MDIO, - }, - }, - { - .ppc_sys_name = "8541E", - .mask = 0xFFFF0000, - .value = 0x807A0000, - .num_devices = 15, - .device_list = (enum ppc_sys_devices[]) - { - MPC85xx_TSEC1, MPC85xx_TSEC2, MPC85xx_IIC1, - MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3, - MPC85xx_PERFMON, MPC85xx_DUART, MPC85xx_SEC2, - MPC85xx_CPM_SPI, MPC85xx_CPM_I2C, - MPC85xx_CPM_FCC1, MPC85xx_CPM_FCC2, - MPC85xx_MDIO, - }, - }, - { - .ppc_sys_name = "8555", - .mask = 0xFFFF0000, - .value = 0x80710000, - .num_devices = 20, - .device_list = (enum ppc_sys_devices[]) - { - MPC85xx_TSEC1, MPC85xx_TSEC2, MPC85xx_IIC1, - MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3, - MPC85xx_PERFMON, MPC85xx_DUART, - MPC85xx_CPM_SPI, MPC85xx_CPM_I2C, MPC85xx_CPM_SCC1, - MPC85xx_CPM_SCC2, MPC85xx_CPM_SCC3, - MPC85xx_CPM_FCC1, MPC85xx_CPM_FCC2, - MPC85xx_CPM_SMC1, MPC85xx_CPM_SMC2, - MPC85xx_CPM_USB, - MPC85xx_MDIO, - }, - }, - { - .ppc_sys_name = "8555E", - .mask = 0xFFFF0000, - .value = 0x80790000, - .num_devices = 21, - .device_list = (enum ppc_sys_devices[]) - { - MPC85xx_TSEC1, MPC85xx_TSEC2, MPC85xx_IIC1, - MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3, - MPC85xx_PERFMON, MPC85xx_DUART, MPC85xx_SEC2, - MPC85xx_CPM_SPI, MPC85xx_CPM_I2C, MPC85xx_CPM_SCC1, - MPC85xx_CPM_SCC2, MPC85xx_CPM_SCC3, - MPC85xx_CPM_FCC1, MPC85xx_CPM_FCC2, - MPC85xx_CPM_SMC1, MPC85xx_CPM_SMC2, - MPC85xx_CPM_USB, - MPC85xx_MDIO, - }, - }, - /* SVRs on 8548 rev1.0 matches for 8548/8547/8545 */ - { - .ppc_sys_name = "8548E", - .mask = 0xFFFF00F0, - .value = 0x80390010, - .num_devices = 14, - .device_list = (enum ppc_sys_devices[]) - { - MPC85xx_eTSEC1, MPC85xx_eTSEC2, MPC85xx_eTSEC3, - MPC85xx_eTSEC4, MPC85xx_IIC1, MPC85xx_IIC2, - MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3, - MPC85xx_PERFMON, MPC85xx_DUART, MPC85xx_SEC2, - MPC85xx_MDIO, - }, - }, - { - .ppc_sys_name = "8548", - .mask = 0xFFFF00F0, - .value = 0x80310010, - .num_devices = 13, - .device_list = (enum ppc_sys_devices[]) - { - MPC85xx_eTSEC1, MPC85xx_eTSEC2, MPC85xx_eTSEC3, - MPC85xx_eTSEC4, MPC85xx_IIC1, MPC85xx_IIC2, - MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3, - MPC85xx_PERFMON, MPC85xx_DUART, - MPC85xx_MDIO, - }, - }, - { - .ppc_sys_name = "8547E", - .mask = 0xFFFF00F0, - .value = 0x80390010, - .num_devices = 14, - .device_list = (enum ppc_sys_devices[]) - { - MPC85xx_eTSEC1, MPC85xx_eTSEC2, MPC85xx_eTSEC3, - MPC85xx_eTSEC4, MPC85xx_IIC1, MPC85xx_IIC2, - MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3, - MPC85xx_PERFMON, MPC85xx_DUART, MPC85xx_SEC2, - MPC85xx_MDIO, - }, - }, - { - .ppc_sys_name = "8547", - .mask = 0xFFFF00F0, - .value = 0x80310010, - .num_devices = 13, - .device_list = (enum ppc_sys_devices[]) - { - MPC85xx_eTSEC1, MPC85xx_eTSEC2, MPC85xx_eTSEC3, - MPC85xx_eTSEC4, MPC85xx_IIC1, MPC85xx_IIC2, - MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3, - MPC85xx_PERFMON, MPC85xx_DUART, - MPC85xx_MDIO, - }, - }, - { - .ppc_sys_name = "8545E", - .mask = 0xFFFF00F0, - .value = 0x80390010, - .num_devices = 12, - .device_list = (enum ppc_sys_devices[]) - { - MPC85xx_eTSEC1, MPC85xx_eTSEC2, - MPC85xx_IIC1, MPC85xx_IIC2, - MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3, - MPC85xx_PERFMON, MPC85xx_DUART, MPC85xx_SEC2, - MPC85xx_MDIO, - }, - }, - { - .ppc_sys_name = "8545", - .mask = 0xFFFF00F0, - .value = 0x80310010, - .num_devices = 11, - .device_list = (enum ppc_sys_devices[]) - { - MPC85xx_eTSEC1, MPC85xx_eTSEC2, - MPC85xx_IIC1, MPC85xx_IIC2, - MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3, - MPC85xx_PERFMON, MPC85xx_DUART, - MPC85xx_MDIO, - }, - }, - { - .ppc_sys_name = "8543E", - .mask = 0xFFFF00F0, - .value = 0x803A0010, - .num_devices = 12, - .device_list = (enum ppc_sys_devices[]) - { - MPC85xx_eTSEC1, MPC85xx_eTSEC2, - MPC85xx_IIC1, MPC85xx_IIC2, - MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3, - MPC85xx_PERFMON, MPC85xx_DUART, MPC85xx_SEC2, - MPC85xx_MDIO, - }, - }, - { - .ppc_sys_name = "8543", - .mask = 0xFFFF00F0, - .value = 0x80320010, - .num_devices = 11, - .device_list = (enum ppc_sys_devices[]) - { - MPC85xx_eTSEC1, MPC85xx_eTSEC2, - MPC85xx_IIC1, MPC85xx_IIC2, - MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3, - MPC85xx_PERFMON, MPC85xx_DUART, - MPC85xx_MDIO, - }, - }, - { /* default match */ - .ppc_sys_name = "", - .mask = 0x00000000, - .value = 0x00000000, - }, -}; diff --git a/arch/ppc/syslib/mpc8xx_devices.c b/arch/ppc/syslib/mpc8xx_devices.c index c05ac87ece4c..80804eee5795 100644 --- a/arch/ppc/syslib/mpc8xx_devices.c +++ b/arch/ppc/syslib/mpc8xx_devices.c @@ -16,7 +16,7 @@ #include <linux/device.h> #include <linux/serial_8250.h> #include <linux/mii.h> -#include <asm/commproc.h> +#include <asm/cpm1.h> #include <asm/mpc8xx.h> #include <asm/irq.h> #include <asm/ppc_sys.h> diff --git a/arch/ppc/syslib/mv64360_pic.c b/arch/ppc/syslib/mv64360_pic.c index 4b7a3338e122..2dd2dc5cd404 100644 --- a/arch/ppc/syslib/mv64360_pic.c +++ b/arch/ppc/syslib/mv64360_pic.c @@ -36,7 +36,6 @@ #include <linux/init.h> #include <linux/sched.h> #include <linux/signal.h> -#include <linux/stddef.h> #include <linux/delay.h> #include <linux/irq.h> #include <linux/interrupt.h> diff --git a/arch/ppc/syslib/ocp.c b/arch/ppc/syslib/ocp.c index 3f5be2c5ce99..ac80370ed2f7 100644 --- a/arch/ppc/syslib/ocp.c +++ b/arch/ppc/syslib/ocp.c @@ -20,7 +20,7 @@ * of peripherals are found on embedded SoC (System On a Chip) * processors or highly integrated system controllers that have * a host bridge and many peripherals. Common examples where - * this is already used include the PPC4xx, PPC85xx, MPC52xx, + * this is already used include the PPC4xx, MPC52xx, * and MV64xxx parts. * * This subsystem creates a standard OCP bus type within the @@ -376,7 +376,7 @@ ocp_remove_one_device(unsigned int vendor, unsigned int function, int index) down_write(&ocp_devices_sem); dev = __ocp_find_device(vendor, function, index); - list_del((struct list_head *)dev); + list_del(&dev->link); up_write(&ocp_devices_sem); DBG(("ocp: ocp_remove_one_device(vendor: %x, function: %x, index: %d)... done.\n", vendor, function, index)); diff --git a/arch/ppc/syslib/open_pic.c b/arch/ppc/syslib/open_pic.c index da36522d327a..67dffe27b5c3 100644 --- a/arch/ppc/syslib/open_pic.c +++ b/arch/ppc/syslib/open_pic.c @@ -24,7 +24,7 @@ #include "open_pic_defs.h" -#if defined(CONFIG_PRPMC800) || defined(CONFIG_85xx) +#if defined(CONFIG_PRPMC800) #define OPENPIC_BIG_ENDIAN #endif diff --git a/arch/ppc/syslib/ppc83xx_pci.h b/arch/ppc/syslib/ppc83xx_pci.h deleted file mode 100644 index ec691640f6be..000000000000 --- a/arch/ppc/syslib/ppc83xx_pci.h +++ /dev/null @@ -1,151 +0,0 @@ -/* Created by Tony Li <tony.li@freescale.com> - * Copyright (c) 2005 freescale semiconductor - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __PPC_SYSLIB_PPC83XX_PCI_H -#define __PPC_SYSLIB_PPC83XX_PCI_H - -typedef struct immr_clk { - u32 spmr; /* system PLL mode Register */ - u32 occr; /* output clock control Register */ - u32 sccr; /* system clock control Register */ - u8 res0[0xF4]; -} immr_clk_t; - -/* - * Sequencer - */ -typedef struct immr_ios { - u32 potar0; - u8 res0[4]; - u32 pobar0; - u8 res1[4]; - u32 pocmr0; - u8 res2[4]; - u32 potar1; - u8 res3[4]; - u32 pobar1; - u8 res4[4]; - u32 pocmr1; - u8 res5[4]; - u32 potar2; - u8 res6[4]; - u32 pobar2; - u8 res7[4]; - u32 pocmr2; - u8 res8[4]; - u32 potar3; - u8 res9[4]; - u32 pobar3; - u8 res10[4]; - u32 pocmr3; - u8 res11[4]; - u32 potar4; - u8 res12[4]; - u32 pobar4; - u8 res13[4]; - u32 pocmr4; - u8 res14[4]; - u32 potar5; - u8 res15[4]; - u32 pobar5; - u8 res16[4]; - u32 pocmr5; - u8 res17[4]; - u8 res18[0x60]; - u32 pmcr; - u8 res19[4]; - u32 dtcr; - u8 res20[4]; -} immr_ios_t; -#define POTAR_TA_MASK 0x000fffff -#define POBAR_BA_MASK 0x000fffff -#define POCMR_EN 0x80000000 -#define POCMR_IO 0x40000000 /* 0--memory space 1--I/O space */ -#define POCMR_SE 0x20000000 /* streaming enable */ -#define POCMR_DST 0x10000000 /* 0--PCI1 1--PCI2 */ -#define POCMR_CM_MASK 0x000fffff - -/* - * PCI Controller Control and Status Registers - */ -typedef struct immr_pcictrl { - u32 esr; - u32 ecdr; - u32 eer; - u32 eatcr; - u32 eacr; - u32 eeacr; - u32 edlcr; - u32 edhcr; - u32 gcr; - u32 ecr; - u32 gsr; - u8 res0[12]; - u32 pitar2; - u8 res1[4]; - u32 pibar2; - u32 piebar2; - u32 piwar2; - u8 res2[4]; - u32 pitar1; - u8 res3[4]; - u32 pibar1; - u32 piebar1; - u32 piwar1; - u8 res4[4]; - u32 pitar0; - u8 res5[4]; - u32 pibar0; - u8 res6[4]; - u32 piwar0; - u8 res7[132]; -} immr_pcictrl_t; -#define PITAR_TA_MASK 0x000fffff -#define PIBAR_MASK 0xffffffff -#define PIEBAR_EBA_MASK 0x000fffff -#define PIWAR_EN 0x80000000 -#define PIWAR_PF 0x20000000 -#define PIWAR_RTT_MASK 0x000f0000 -#define PIWAR_RTT_NO_SNOOP 0x00040000 -#define PIWAR_RTT_SNOOP 0x00050000 -#define PIWAR_WTT_MASK 0x0000f000 -#define PIWAR_WTT_NO_SNOOP 0x00004000 -#define PIWAR_WTT_SNOOP 0x00005000 -#define PIWAR_IWS_MASK 0x0000003F -#define PIWAR_IWS_4K 0x0000000B -#define PIWAR_IWS_8K 0x0000000C -#define PIWAR_IWS_16K 0x0000000D -#define PIWAR_IWS_32K 0x0000000E -#define PIWAR_IWS_64K 0x0000000F -#define PIWAR_IWS_128K 0x00000010 -#define PIWAR_IWS_256K 0x00000011 -#define PIWAR_IWS_512K 0x00000012 -#define PIWAR_IWS_1M 0x00000013 -#define PIWAR_IWS_2M 0x00000014 -#define PIWAR_IWS_4M 0x00000015 -#define PIWAR_IWS_8M 0x00000016 -#define PIWAR_IWS_16M 0x00000017 -#define PIWAR_IWS_32M 0x00000018 -#define PIWAR_IWS_64M 0x00000019 -#define PIWAR_IWS_128M 0x0000001A -#define PIWAR_IWS_256M 0x0000001B -#define PIWAR_IWS_512M 0x0000001C -#define PIWAR_IWS_1G 0x0000001D -#define PIWAR_IWS_2G 0x0000001E - -#endif /* __PPC_SYSLIB_PPC83XX_PCI_H */ diff --git a/arch/ppc/syslib/ppc83xx_setup.c b/arch/ppc/syslib/ppc83xx_setup.c deleted file mode 100644 index ec466db52114..000000000000 --- a/arch/ppc/syslib/ppc83xx_setup.c +++ /dev/null @@ -1,411 +0,0 @@ -/* - * MPC83XX common board code - * - * Maintainer: Kumar Gala <galak@kernel.crashing.org> - * - * Copyright 2005 Freescale Semiconductor Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - * - * Added PCI support -- Tony Li <tony.li@freescale.com> - */ - -#include <linux/types.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/pci.h> -#include <linux/serial.h> -#include <linux/tty.h> /* for linux/serial_core.h */ -#include <linux/serial_core.h> -#include <linux/serial_8250.h> - -#include <asm/time.h> -#include <asm/mpc83xx.h> -#include <asm/mmu.h> -#include <asm/ppc_sys.h> -#include <asm/kgdb.h> -#include <asm/delay.h> -#include <asm/machdep.h> - -#include <syslib/ppc83xx_setup.h> -#if defined(CONFIG_PCI) -#include <asm/delay.h> -#include <syslib/ppc83xx_pci.h> -#endif - -phys_addr_t immrbar; - -/* Return the amount of memory */ -unsigned long __init -mpc83xx_find_end_of_memory(void) -{ - bd_t *binfo; - - binfo = (bd_t *) __res; - - return binfo->bi_memsize; -} - -long __init -mpc83xx_time_init(void) -{ -#define SPCR_OFFS 0x00000110 -#define SPCR_TBEN 0x00400000 - - bd_t *binfo = (bd_t *)__res; - u32 *spcr = ioremap(binfo->bi_immr_base + SPCR_OFFS, 4); - - *spcr |= SPCR_TBEN; - - iounmap(spcr); - - return 0; -} - -/* The decrementer counts at the system (internal) clock freq divided by 4 */ -void __init -mpc83xx_calibrate_decr(void) -{ - bd_t *binfo = (bd_t *) __res; - unsigned int freq, divisor; - - freq = binfo->bi_busfreq; - divisor = 4; - tb_ticks_per_jiffy = freq / HZ / divisor; - tb_to_us = mulhwu_scale_factor(freq / divisor, 1000000); -} - -#ifdef CONFIG_SERIAL_8250 -void __init -mpc83xx_early_serial_map(void) -{ -#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB) - struct uart_port serial_req; -#endif - struct plat_serial8250_port *pdata; - bd_t *binfo = (bd_t *) __res; - pdata = (struct plat_serial8250_port *) ppc_sys_get_pdata(MPC83xx_DUART); - - /* Setup serial port access */ - pdata[0].uartclk = binfo->bi_busfreq; - pdata[0].mapbase += binfo->bi_immr_base; - pdata[0].membase = ioremap(pdata[0].mapbase, 0x100); - -#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB) - memset(&serial_req, 0, sizeof (serial_req)); - serial_req.iotype = UPIO_MEM; - serial_req.mapbase = pdata[0].mapbase; - serial_req.membase = pdata[0].membase; - serial_req.regshift = 0; - - gen550_init(0, &serial_req); -#endif - - pdata[1].uartclk = binfo->bi_busfreq; - pdata[1].mapbase += binfo->bi_immr_base; - pdata[1].membase = ioremap(pdata[1].mapbase, 0x100); - -#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB) - /* Assume gen550_init() doesn't modify serial_req */ - serial_req.mapbase = pdata[1].mapbase; - serial_req.membase = pdata[1].membase; - - gen550_init(1, &serial_req); -#endif -} -#endif - -void -mpc83xx_restart(char *cmd) -{ - volatile unsigned char __iomem *reg; - unsigned char tmp; - - reg = ioremap(BCSR_PHYS_ADDR, BCSR_SIZE); - - local_irq_disable(); - - /* - * Unlock the BCSR bits so a PRST will update the contents. - * Otherwise the reset asserts but doesn't clear. - */ - tmp = in_8(reg + BCSR_MISC_REG3_OFF); - tmp |= BCSR_MISC_REG3_CNFLOCK; /* low true, high false */ - out_8(reg + BCSR_MISC_REG3_OFF, tmp); - - /* - * Trigger a reset via a low->high transition of the - * PORESET bit. - */ - tmp = in_8(reg + BCSR_MISC_REG2_OFF); - tmp &= ~BCSR_MISC_REG2_PORESET; - out_8(reg + BCSR_MISC_REG2_OFF, tmp); - - udelay(1); - - tmp |= BCSR_MISC_REG2_PORESET; - out_8(reg + BCSR_MISC_REG2_OFF, tmp); - - for(;;); -} - -void -mpc83xx_power_off(void) -{ - local_irq_disable(); - for(;;); -} - -void -mpc83xx_halt(void) -{ - local_irq_disable(); - for(;;); -} - -#if defined(CONFIG_PCI) -void __init -mpc83xx_setup_pci1(struct pci_controller *hose) -{ - u16 reg16; - volatile immr_pcictrl_t * pci_ctrl; - volatile immr_ios_t * ios; - bd_t *binfo = (bd_t *) __res; - - pci_ctrl = ioremap(binfo->bi_immr_base + 0x8500, sizeof(immr_pcictrl_t)); - ios = ioremap(binfo->bi_immr_base + 0x8400, sizeof(immr_ios_t)); - - /* - * Configure PCI Outbound Translation Windows - */ - ios->potar0 = (MPC83xx_PCI1_LOWER_MEM >> 12) & POTAR_TA_MASK; - ios->pobar0 = (MPC83xx_PCI1_LOWER_MEM >> 12) & POBAR_BA_MASK; - ios->pocmr0 = POCMR_EN | - (((0xffffffff - (MPC83xx_PCI1_UPPER_MEM - - MPC83xx_PCI1_LOWER_MEM)) >> 12) & POCMR_CM_MASK); - - /* mapped to PCI1 IO space */ - ios->potar1 = (MPC83xx_PCI1_LOWER_IO >> 12) & POTAR_TA_MASK; - ios->pobar1 = (MPC83xx_PCI1_IO_BASE >> 12) & POBAR_BA_MASK; - ios->pocmr1 = POCMR_EN | POCMR_IO | - (((0xffffffff - (MPC83xx_PCI1_UPPER_IO - - MPC83xx_PCI1_LOWER_IO)) >> 12) & POCMR_CM_MASK); - - /* - * Configure PCI Inbound Translation Windows - */ - pci_ctrl->pitar1 = 0x0; - pci_ctrl->pibar1 = 0x0; - pci_ctrl->piebar1 = 0x0; - pci_ctrl->piwar1 = PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP | PIWAR_WTT_SNOOP | PIWAR_IWS_2G; - - /* - * Release PCI RST signal - */ - pci_ctrl->gcr = 0; - udelay(2000); - pci_ctrl->gcr = 1; - udelay(2000); - - reg16 = 0xff; - early_read_config_word(hose, hose->first_busno, 0, PCI_COMMAND, ®16); - reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; - early_write_config_word(hose, hose->first_busno, 0, PCI_COMMAND, reg16); - - /* - * Clear non-reserved bits in status register. - */ - early_write_config_word(hose, hose->first_busno, 0, PCI_STATUS, 0xffff); - early_write_config_byte(hose, hose->first_busno, 0, PCI_LATENCY_TIMER, 0x80); - - iounmap(pci_ctrl); - iounmap(ios); -} - -void __init -mpc83xx_setup_pci2(struct pci_controller *hose) -{ - u16 reg16; - volatile immr_pcictrl_t * pci_ctrl; - volatile immr_ios_t * ios; - bd_t *binfo = (bd_t *) __res; - - pci_ctrl = ioremap(binfo->bi_immr_base + 0x8600, sizeof(immr_pcictrl_t)); - ios = ioremap(binfo->bi_immr_base + 0x8400, sizeof(immr_ios_t)); - - /* - * Configure PCI Outbound Translation Windows - */ - ios->potar3 = (MPC83xx_PCI2_LOWER_MEM >> 12) & POTAR_TA_MASK; - ios->pobar3 = (MPC83xx_PCI2_LOWER_MEM >> 12) & POBAR_BA_MASK; - ios->pocmr3 = POCMR_EN | POCMR_DST | - (((0xffffffff - (MPC83xx_PCI2_UPPER_MEM - - MPC83xx_PCI2_LOWER_MEM)) >> 12) & POCMR_CM_MASK); - - /* mapped to PCI2 IO space */ - ios->potar4 = (MPC83xx_PCI2_LOWER_IO >> 12) & POTAR_TA_MASK; - ios->pobar4 = (MPC83xx_PCI2_IO_BASE >> 12) & POBAR_BA_MASK; - ios->pocmr4 = POCMR_EN | POCMR_DST | POCMR_IO | - (((0xffffffff - (MPC83xx_PCI2_UPPER_IO - - MPC83xx_PCI2_LOWER_IO)) >> 12) & POCMR_CM_MASK); - - /* - * Configure PCI Inbound Translation Windows - */ - pci_ctrl->pitar1 = 0x0; - pci_ctrl->pibar1 = 0x0; - pci_ctrl->piebar1 = 0x0; - pci_ctrl->piwar1 = PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP | PIWAR_WTT_SNOOP | PIWAR_IWS_2G; - - /* - * Release PCI RST signal - */ - pci_ctrl->gcr = 0; - udelay(2000); - pci_ctrl->gcr = 1; - udelay(2000); - - reg16 = 0xff; - early_read_config_word(hose, hose->first_busno, 0, PCI_COMMAND, ®16); - reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; - early_write_config_word(hose, hose->first_busno, 0, PCI_COMMAND, reg16); - - /* - * Clear non-reserved bits in status register. - */ - early_write_config_word(hose, hose->first_busno, 0, PCI_STATUS, 0xffff); - early_write_config_byte(hose, hose->first_busno, 0, PCI_LATENCY_TIMER, 0x80); - - iounmap(pci_ctrl); - iounmap(ios); -} - -/* - * PCI buses can be enabled only if SYS board combinates with PIB - * (Platform IO Board) board which provide 3 PCI slots. There is 2 PCI buses - * and 3 PCI slots, so people must configure the routes between them before - * enable PCI bus. This routes are under the control of PCA9555PW device which - * can be accessed via I2C bus 2 and are configured by firmware. Refer to - * Freescale to get more information about firmware configuration. - */ - -extern int mpc83xx_exclude_device(u_char bus, u_char devfn); -extern int mpc83xx_map_irq(struct pci_dev *dev, unsigned char idsel, - unsigned char pin); -void __init -mpc83xx_setup_hose(void) -{ - u32 val32; - volatile immr_clk_t * clk; - struct pci_controller * hose1; -#ifdef CONFIG_MPC83xx_PCI2 - struct pci_controller * hose2; -#endif - bd_t * binfo = (bd_t *)__res; - - clk = ioremap(binfo->bi_immr_base + 0xA00, - sizeof(immr_clk_t)); - - /* - * Configure PCI controller and PCI_CLK_OUTPUT both in 66M mode - */ - val32 = clk->occr; - udelay(2000); - clk->occr = 0xff000000; - udelay(2000); - - iounmap(clk); - - hose1 = pcibios_alloc_controller(); - if(!hose1) - return; - - ppc_md.pci_swizzle = common_swizzle; - ppc_md.pci_map_irq = mpc83xx_map_irq; - - hose1->bus_offset = 0; - hose1->first_busno = 0; - hose1->last_busno = 0xff; - - setup_indirect_pci(hose1, binfo->bi_immr_base + PCI1_CFG_ADDR_OFFSET, - binfo->bi_immr_base + PCI1_CFG_DATA_OFFSET); - hose1->set_cfg_type = 1; - - mpc83xx_setup_pci1(hose1); - - hose1->pci_mem_offset = MPC83xx_PCI1_MEM_OFFSET; - hose1->mem_space.start = MPC83xx_PCI1_LOWER_MEM; - hose1->mem_space.end = MPC83xx_PCI1_UPPER_MEM; - - hose1->io_base_phys = MPC83xx_PCI1_IO_BASE; - hose1->io_space.start = MPC83xx_PCI1_LOWER_IO; - hose1->io_space.end = MPC83xx_PCI1_UPPER_IO; -#ifdef CONFIG_MPC83xx_PCI2 - isa_io_base = (unsigned long)ioremap(MPC83xx_PCI1_IO_BASE, - MPC83xx_PCI1_IO_SIZE + MPC83xx_PCI2_IO_SIZE); -#else - isa_io_base = (unsigned long)ioremap(MPC83xx_PCI1_IO_BASE, - MPC83xx_PCI1_IO_SIZE); -#endif /* CONFIG_MPC83xx_PCI2 */ - hose1->io_base_virt = (void *)isa_io_base; - /* setup resources */ - pci_init_resource(&hose1->io_resource, - MPC83xx_PCI1_LOWER_IO, - MPC83xx_PCI1_UPPER_IO, - IORESOURCE_IO, "PCI host bridge 1"); - pci_init_resource(&hose1->mem_resources[0], - MPC83xx_PCI1_LOWER_MEM, - MPC83xx_PCI1_UPPER_MEM, - IORESOURCE_MEM, "PCI host bridge 1"); - - ppc_md.pci_exclude_device = mpc83xx_exclude_device; - hose1->last_busno = pciauto_bus_scan(hose1, hose1->first_busno); - -#ifdef CONFIG_MPC83xx_PCI2 - hose2 = pcibios_alloc_controller(); - if(!hose2) - return; - - hose2->bus_offset = hose1->last_busno + 1; - hose2->first_busno = hose1->last_busno + 1; - hose2->last_busno = 0xff; - setup_indirect_pci(hose2, binfo->bi_immr_base + PCI2_CFG_ADDR_OFFSET, - binfo->bi_immr_base + PCI2_CFG_DATA_OFFSET); - hose2->set_cfg_type = 1; - - mpc83xx_setup_pci2(hose2); - - hose2->pci_mem_offset = MPC83xx_PCI2_MEM_OFFSET; - hose2->mem_space.start = MPC83xx_PCI2_LOWER_MEM; - hose2->mem_space.end = MPC83xx_PCI2_UPPER_MEM; - - hose2->io_base_phys = MPC83xx_PCI2_IO_BASE; - hose2->io_space.start = MPC83xx_PCI2_LOWER_IO; - hose2->io_space.end = MPC83xx_PCI2_UPPER_IO; - hose2->io_base_virt = (void *)(isa_io_base + MPC83xx_PCI1_IO_SIZE); - /* setup resources */ - pci_init_resource(&hose2->io_resource, - MPC83xx_PCI2_LOWER_IO, - MPC83xx_PCI2_UPPER_IO, - IORESOURCE_IO, "PCI host bridge 2"); - pci_init_resource(&hose2->mem_resources[0], - MPC83xx_PCI2_LOWER_MEM, - MPC83xx_PCI2_UPPER_MEM, - IORESOURCE_MEM, "PCI host bridge 2"); - - hose2->last_busno = pciauto_bus_scan(hose2, hose2->first_busno); -#endif /* CONFIG_MPC83xx_PCI2 */ -} -#endif /*CONFIG_PCI*/ diff --git a/arch/ppc/syslib/ppc83xx_setup.h b/arch/ppc/syslib/ppc83xx_setup.h deleted file mode 100644 index b918a2d245ea..000000000000 --- a/arch/ppc/syslib/ppc83xx_setup.h +++ /dev/null @@ -1,55 +0,0 @@ -/* - * MPC83XX common board definitions - * - * Maintainer: Kumar Gala <galak@kernel.crashing.org> - * - * Copyright 2005 Freescale Semiconductor Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __PPC_SYSLIB_PPC83XX_SETUP_H -#define __PPC_SYSLIB_PPC83XX_SETUP_H - -#include <linux/init.h> - -extern unsigned long mpc83xx_find_end_of_memory(void) __init; -extern long mpc83xx_time_init(void) __init; -extern void mpc83xx_calibrate_decr(void) __init; -extern void mpc83xx_early_serial_map(void) __init; -extern void mpc83xx_restart(char *cmd); -extern void mpc83xx_power_off(void); -extern void mpc83xx_halt(void); -extern void mpc83xx_setup_hose(void) __init; - -/* PCI config */ -#define PCI1_CFG_ADDR_OFFSET (0x8300) -#define PCI1_CFG_DATA_OFFSET (0x8304) - -#define PCI2_CFG_ADDR_OFFSET (0x8380) -#define PCI2_CFG_DATA_OFFSET (0x8384) - -/* Serial Config */ -#ifdef CONFIG_SERIAL_MANY_PORTS -#define RS_TABLE_SIZE 64 -#else -#define RS_TABLE_SIZE 2 -#endif - -#ifndef BASE_BAUD -#define BASE_BAUD 115200 -#endif - -#endif /* __PPC_SYSLIB_PPC83XX_SETUP_H */ diff --git a/arch/ppc/syslib/ppc85xx_common.c b/arch/ppc/syslib/ppc85xx_common.c deleted file mode 100644 index e5ac699e7316..000000000000 --- a/arch/ppc/syslib/ppc85xx_common.c +++ /dev/null @@ -1,38 +0,0 @@ -/* - * MPC85xx support routines - * - * Maintainer: Kumar Gala <galak@kernel.crashing.org> - * - * Copyright 2004 Freescale Semiconductor Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include <linux/types.h> -#include <linux/module.h> -#include <linux/init.h> - -#include <asm/mpc85xx.h> -#include <asm/mmu.h> - -/* ************************************************************************ */ -/* Return the value of CCSRBAR for the current board */ - -phys_addr_t -get_ccsrbar(void) -{ - return BOARD_CCSRBAR; -} - -EXPORT_SYMBOL(get_ccsrbar); - -/* For now this is a pass through */ -phys_addr_t fixup_bigphys_addr(phys_addr_t addr, phys_addr_t size) -{ - return addr; -}; -EXPORT_SYMBOL(fixup_bigphys_addr); - diff --git a/arch/ppc/syslib/ppc85xx_common.h b/arch/ppc/syslib/ppc85xx_common.h deleted file mode 100644 index 4fc405425113..000000000000 --- a/arch/ppc/syslib/ppc85xx_common.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * MPC85xx support routines - * - * Maintainer: Kumar Gala <galak@kernel.crashing.org> - * - * Copyright 2004 Freescale Semiconductor Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#ifndef __PPC_SYSLIB_PPC85XX_COMMON_H -#define __PPC_SYSLIB_PPC85XX_COMMON_H - -#include <linux/init.h> - -/* Provide access to ccsrbar for any modules, etc */ -phys_addr_t get_ccsrbar(void); - -#endif /* __PPC_SYSLIB_PPC85XX_COMMON_H */ diff --git a/arch/ppc/syslib/ppc85xx_rio.c b/arch/ppc/syslib/ppc85xx_rio.c deleted file mode 100644 index af2425e4655f..000000000000 --- a/arch/ppc/syslib/ppc85xx_rio.c +++ /dev/null @@ -1,932 +0,0 @@ -/* - * MPC85xx RapidIO support - * - * Copyright 2005 MontaVista Software, Inc. - * Matt Porter <mporter@kernel.crashing.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/types.h> -#include <linux/dma-mapping.h> -#include <linux/interrupt.h> -#include <linux/rio.h> -#include <linux/rio_drv.h> - -#include <asm/io.h> - -#define RIO_REGS_BASE (CCSRBAR + 0xc0000) -#define RIO_ATMU_REGS_OFFSET 0x10c00 -#define RIO_MSG_REGS_OFFSET 0x11000 -#define RIO_MAINT_WIN_SIZE 0x400000 -#define RIO_DBELL_WIN_SIZE 0x1000 - -#define RIO_MSG_OMR_MUI 0x00000002 -#define RIO_MSG_OSR_TE 0x00000080 -#define RIO_MSG_OSR_QOI 0x00000020 -#define RIO_MSG_OSR_QFI 0x00000010 -#define RIO_MSG_OSR_MUB 0x00000004 -#define RIO_MSG_OSR_EOMI 0x00000002 -#define RIO_MSG_OSR_QEI 0x00000001 - -#define RIO_MSG_IMR_MI 0x00000002 -#define RIO_MSG_ISR_TE 0x00000080 -#define RIO_MSG_ISR_QFI 0x00000010 -#define RIO_MSG_ISR_DIQI 0x00000001 - -#define RIO_MSG_DESC_SIZE 32 -#define RIO_MSG_BUFFER_SIZE 4096 -#define RIO_MIN_TX_RING_SIZE 2 -#define RIO_MAX_TX_RING_SIZE 2048 -#define RIO_MIN_RX_RING_SIZE 2 -#define RIO_MAX_RX_RING_SIZE 2048 - -#define DOORBELL_DMR_DI 0x00000002 -#define DOORBELL_DSR_TE 0x00000080 -#define DOORBELL_DSR_QFI 0x00000010 -#define DOORBELL_DSR_DIQI 0x00000001 -#define DOORBELL_TID_OFFSET 0x03 -#define DOORBELL_SID_OFFSET 0x05 -#define DOORBELL_INFO_OFFSET 0x06 - -#define DOORBELL_MESSAGE_SIZE 0x08 -#define DBELL_SID(x) (*(u8 *)(x + DOORBELL_SID_OFFSET)) -#define DBELL_TID(x) (*(u8 *)(x + DOORBELL_TID_OFFSET)) -#define DBELL_INF(x) (*(u16 *)(x + DOORBELL_INFO_OFFSET)) - -struct rio_atmu_regs { - u32 rowtar; - u32 pad1; - u32 rowbar; - u32 pad2; - u32 rowar; - u32 pad3[3]; -}; - -struct rio_msg_regs { - u32 omr; - u32 osr; - u32 pad1; - u32 odqdpar; - u32 pad2; - u32 osar; - u32 odpr; - u32 odatr; - u32 odcr; - u32 pad3; - u32 odqepar; - u32 pad4[13]; - u32 imr; - u32 isr; - u32 pad5; - u32 ifqdpar; - u32 pad6; - u32 ifqepar; - u32 pad7[250]; - u32 dmr; - u32 dsr; - u32 pad8; - u32 dqdpar; - u32 pad9; - u32 dqepar; - u32 pad10[26]; - u32 pwmr; - u32 pwsr; - u32 pad11; - u32 pwqbar; -}; - -struct rio_tx_desc { - u32 res1; - u32 saddr; - u32 dport; - u32 dattr; - u32 res2; - u32 res3; - u32 dwcnt; - u32 res4; -}; - -static u32 regs_win; -static struct rio_atmu_regs *atmu_regs; -static struct rio_atmu_regs *maint_atmu_regs; -static struct rio_atmu_regs *dbell_atmu_regs; -static u32 dbell_win; -static u32 maint_win; -static struct rio_msg_regs *msg_regs; - -static struct rio_dbell_ring { - void *virt; - dma_addr_t phys; -} dbell_ring; - -static struct rio_msg_tx_ring { - void *virt; - dma_addr_t phys; - void *virt_buffer[RIO_MAX_TX_RING_SIZE]; - dma_addr_t phys_buffer[RIO_MAX_TX_RING_SIZE]; - int tx_slot; - int size; - void *dev_id; -} msg_tx_ring; - -static struct rio_msg_rx_ring { - void *virt; - dma_addr_t phys; - void *virt_buffer[RIO_MAX_RX_RING_SIZE]; - int rx_slot; - int size; - void *dev_id; -} msg_rx_ring; - -/** - * mpc85xx_rio_doorbell_send - Send a MPC85xx doorbell message - * @index: ID of RapidIO interface - * @destid: Destination ID of target device - * @data: 16-bit info field of RapidIO doorbell message - * - * Sends a MPC85xx doorbell message. Returns %0 on success or - * %-EINVAL on failure. - */ -static int mpc85xx_rio_doorbell_send(int index, u16 destid, u16 data) -{ - pr_debug("mpc85xx_doorbell_send: index %d destid %4.4x data %4.4x\n", - index, destid, data); - out_be32((void *)&dbell_atmu_regs->rowtar, destid << 22); - out_be16((void *)(dbell_win), data); - - return 0; -} - -/** - * mpc85xx_local_config_read - Generate a MPC85xx local config space read - * @index: ID of RapdiIO interface - * @offset: Offset into configuration space - * @len: Length (in bytes) of the maintenance transaction - * @data: Value to be read into - * - * Generates a MPC85xx local configuration space read. Returns %0 on - * success or %-EINVAL on failure. - */ -static int mpc85xx_local_config_read(int index, u32 offset, int len, u32 * data) -{ - pr_debug("mpc85xx_local_config_read: index %d offset %8.8x\n", index, - offset); - *data = in_be32((void *)(regs_win + offset)); - - return 0; -} - -/** - * mpc85xx_local_config_write - Generate a MPC85xx local config space write - * @index: ID of RapdiIO interface - * @offset: Offset into configuration space - * @len: Length (in bytes) of the maintenance transaction - * @data: Value to be written - * - * Generates a MPC85xx local configuration space write. Returns %0 on - * success or %-EINVAL on failure. - */ -static int mpc85xx_local_config_write(int index, u32 offset, int len, u32 data) -{ - pr_debug - ("mpc85xx_local_config_write: index %d offset %8.8x data %8.8x\n", - index, offset, data); - out_be32((void *)(regs_win + offset), data); - - return 0; -} - -/** - * mpc85xx_rio_config_read - Generate a MPC85xx read maintenance transaction - * @index: ID of RapdiIO interface - * @destid: Destination ID of transaction - * @hopcount: Number of hops to target device - * @offset: Offset into configuration space - * @len: Length (in bytes) of the maintenance transaction - * @val: Location to be read into - * - * Generates a MPC85xx read maintenance transaction. Returns %0 on - * success or %-EINVAL on failure. - */ -static int -mpc85xx_rio_config_read(int index, u16 destid, u8 hopcount, u32 offset, int len, - u32 * val) -{ - u8 *data; - - pr_debug - ("mpc85xx_rio_config_read: index %d destid %d hopcount %d offset %8.8x len %d\n", - index, destid, hopcount, offset, len); - out_be32((void *)&maint_atmu_regs->rowtar, - (destid << 22) | (hopcount << 12) | ((offset & ~0x3) >> 9)); - - data = (u8 *) maint_win + offset; - switch (len) { - case 1: - *val = in_8((u8 *) data); - break; - case 2: - *val = in_be16((u16 *) data); - break; - default: - *val = in_be32((u32 *) data); - break; - } - - return 0; -} - -/** - * mpc85xx_rio_config_write - Generate a MPC85xx write maintenance transaction - * @index: ID of RapdiIO interface - * @destid: Destination ID of transaction - * @hopcount: Number of hops to target device - * @offset: Offset into configuration space - * @len: Length (in bytes) of the maintenance transaction - * @val: Value to be written - * - * Generates an MPC85xx write maintenance transaction. Returns %0 on - * success or %-EINVAL on failure. - */ -static int -mpc85xx_rio_config_write(int index, u16 destid, u8 hopcount, u32 offset, - int len, u32 val) -{ - u8 *data; - pr_debug - ("mpc85xx_rio_config_write: index %d destid %d hopcount %d offset %8.8x len %d val %8.8x\n", - index, destid, hopcount, offset, len, val); - out_be32((void *)&maint_atmu_regs->rowtar, - (destid << 22) | (hopcount << 12) | ((offset & ~0x3) >> 9)); - - data = (u8 *) maint_win + offset; - switch (len) { - case 1: - out_8((u8 *) data, val); - break; - case 2: - out_be16((u16 *) data, val); - break; - default: - out_be32((u32 *) data, val); - break; - } - - return 0; -} - -/** - * rio_hw_add_outb_message - Add message to the MPC85xx outbound message queue - * @mport: Master port with outbound message queue - * @rdev: Target of outbound message - * @mbox: Outbound mailbox - * @buffer: Message to add to outbound queue - * @len: Length of message - * - * Adds the @buffer message to the MPC85xx outbound message queue. Returns - * %0 on success or %-EINVAL on failure. - */ -int -rio_hw_add_outb_message(struct rio_mport *mport, struct rio_dev *rdev, int mbox, - void *buffer, size_t len) -{ - u32 omr; - struct rio_tx_desc *desc = - (struct rio_tx_desc *)msg_tx_ring.virt + msg_tx_ring.tx_slot; - int ret = 0; - - pr_debug - ("RIO: rio_hw_add_outb_message(): destid %4.4x mbox %d buffer %8.8x len %8.8x\n", - rdev->destid, mbox, (int)buffer, len); - - if ((len < 8) || (len > RIO_MAX_MSG_SIZE)) { - ret = -EINVAL; - goto out; - } - - /* Copy and clear rest of buffer */ - memcpy(msg_tx_ring.virt_buffer[msg_tx_ring.tx_slot], buffer, len); - if (len < (RIO_MAX_MSG_SIZE - 4)) - memset((void *)((u32) msg_tx_ring. - virt_buffer[msg_tx_ring.tx_slot] + len), 0, - RIO_MAX_MSG_SIZE - len); - - /* Set mbox field for message */ - desc->dport = mbox & 0x3; - - /* Enable EOMI interrupt, set priority, and set destid */ - desc->dattr = 0x28000000 | (rdev->destid << 2); - - /* Set transfer size aligned to next power of 2 (in double words) */ - desc->dwcnt = is_power_of_2(len) ? len : 1 << get_bitmask_order(len); - - /* Set snooping and source buffer address */ - desc->saddr = 0x00000004 | msg_tx_ring.phys_buffer[msg_tx_ring.tx_slot]; - - /* Increment enqueue pointer */ - omr = in_be32((void *)&msg_regs->omr); - out_be32((void *)&msg_regs->omr, omr | RIO_MSG_OMR_MUI); - - /* Go to next descriptor */ - if (++msg_tx_ring.tx_slot == msg_tx_ring.size) - msg_tx_ring.tx_slot = 0; - - out: - return ret; -} - -EXPORT_SYMBOL_GPL(rio_hw_add_outb_message); - -/** - * mpc85xx_rio_tx_handler - MPC85xx outbound message interrupt handler - * @irq: Linux interrupt number - * @dev_instance: Pointer to interrupt-specific data - * - * Handles outbound message interrupts. Executes a register outbound - * mailbox event handler and acks the interrupt occurrence. - */ -static irqreturn_t -mpc85xx_rio_tx_handler(int irq, void *dev_instance) -{ - int osr; - struct rio_mport *port = (struct rio_mport *)dev_instance; - - osr = in_be32((void *)&msg_regs->osr); - - if (osr & RIO_MSG_OSR_TE) { - pr_info("RIO: outbound message transmission error\n"); - out_be32((void *)&msg_regs->osr, RIO_MSG_OSR_TE); - goto out; - } - - if (osr & RIO_MSG_OSR_QOI) { - pr_info("RIO: outbound message queue overflow\n"); - out_be32((void *)&msg_regs->osr, RIO_MSG_OSR_QOI); - goto out; - } - - if (osr & RIO_MSG_OSR_EOMI) { - u32 dqp = in_be32((void *)&msg_regs->odqdpar); - int slot = (dqp - msg_tx_ring.phys) >> 5; - port->outb_msg[0].mcback(port, msg_tx_ring.dev_id, -1, slot); - - /* Ack the end-of-message interrupt */ - out_be32((void *)&msg_regs->osr, RIO_MSG_OSR_EOMI); - } - - out: - return IRQ_HANDLED; -} - -/** - * rio_open_outb_mbox - Initialize MPC85xx outbound mailbox - * @mport: Master port implementing the outbound message unit - * @dev_id: Device specific pointer to pass on event - * @mbox: Mailbox to open - * @entries: Number of entries in the outbound mailbox ring - * - * Initializes buffer ring, request the outbound message interrupt, - * and enables the outbound message unit. Returns %0 on success and - * %-EINVAL or %-ENOMEM on failure. - */ -int rio_open_outb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int entries) -{ - int i, j, rc = 0; - - if ((entries < RIO_MIN_TX_RING_SIZE) || - (entries > RIO_MAX_TX_RING_SIZE) || (!is_power_of_2(entries))) { - rc = -EINVAL; - goto out; - } - - /* Initialize shadow copy ring */ - msg_tx_ring.dev_id = dev_id; - msg_tx_ring.size = entries; - - for (i = 0; i < msg_tx_ring.size; i++) { - if (! - (msg_tx_ring.virt_buffer[i] = - dma_alloc_coherent(NULL, RIO_MSG_BUFFER_SIZE, - &msg_tx_ring.phys_buffer[i], - GFP_KERNEL))) { - rc = -ENOMEM; - for (j = 0; j < msg_tx_ring.size; j++) - if (msg_tx_ring.virt_buffer[j]) - dma_free_coherent(NULL, - RIO_MSG_BUFFER_SIZE, - msg_tx_ring. - virt_buffer[j], - msg_tx_ring. - phys_buffer[j]); - goto out; - } - } - - /* Initialize outbound message descriptor ring */ - if (!(msg_tx_ring.virt = dma_alloc_coherent(NULL, - msg_tx_ring.size * - RIO_MSG_DESC_SIZE, - &msg_tx_ring.phys, - GFP_KERNEL))) { - rc = -ENOMEM; - goto out_dma; - } - memset(msg_tx_ring.virt, 0, msg_tx_ring.size * RIO_MSG_DESC_SIZE); - msg_tx_ring.tx_slot = 0; - - /* Point dequeue/enqueue pointers at first entry in ring */ - out_be32((void *)&msg_regs->odqdpar, msg_tx_ring.phys); - out_be32((void *)&msg_regs->odqepar, msg_tx_ring.phys); - - /* Configure for snooping */ - out_be32((void *)&msg_regs->osar, 0x00000004); - - /* Clear interrupt status */ - out_be32((void *)&msg_regs->osr, 0x000000b3); - - /* Hook up outbound message handler */ - if ((rc = - request_irq(MPC85xx_IRQ_RIO_TX, mpc85xx_rio_tx_handler, 0, - "msg_tx", (void *)mport)) < 0) - goto out_irq; - - /* - * Configure outbound message unit - * Snooping - * Interrupts (all enabled, except QEIE) - * Chaining mode - * Disable - */ - out_be32((void *)&msg_regs->omr, 0x00100220); - - /* Set number of entries */ - out_be32((void *)&msg_regs->omr, - in_be32((void *)&msg_regs->omr) | - ((get_bitmask_order(entries) - 2) << 12)); - - /* Now enable the unit */ - out_be32((void *)&msg_regs->omr, in_be32((void *)&msg_regs->omr) | 0x1); - - out: - return rc; - - out_irq: - dma_free_coherent(NULL, msg_tx_ring.size * RIO_MSG_DESC_SIZE, - msg_tx_ring.virt, msg_tx_ring.phys); - - out_dma: - for (i = 0; i < msg_tx_ring.size; i++) - dma_free_coherent(NULL, RIO_MSG_BUFFER_SIZE, - msg_tx_ring.virt_buffer[i], - msg_tx_ring.phys_buffer[i]); - - return rc; -} - -/** - * rio_close_outb_mbox - Shut down MPC85xx outbound mailbox - * @mport: Master port implementing the outbound message unit - * @mbox: Mailbox to close - * - * Disables the outbound message unit, free all buffers, and - * frees the outbound message interrupt. - */ -void rio_close_outb_mbox(struct rio_mport *mport, int mbox) -{ - /* Disable inbound message unit */ - out_be32((void *)&msg_regs->omr, 0); - - /* Free ring */ - dma_free_coherent(NULL, msg_tx_ring.size * RIO_MSG_DESC_SIZE, - msg_tx_ring.virt, msg_tx_ring.phys); - - /* Free interrupt */ - free_irq(MPC85xx_IRQ_RIO_TX, (void *)mport); -} - -/** - * mpc85xx_rio_rx_handler - MPC85xx inbound message interrupt handler - * @irq: Linux interrupt number - * @dev_instance: Pointer to interrupt-specific data - * - * Handles inbound message interrupts. Executes a registered inbound - * mailbox event handler and acks the interrupt occurrence. - */ -static irqreturn_t -mpc85xx_rio_rx_handler(int irq, void *dev_instance) -{ - int isr; - struct rio_mport *port = (struct rio_mport *)dev_instance; - - isr = in_be32((void *)&msg_regs->isr); - - if (isr & RIO_MSG_ISR_TE) { - pr_info("RIO: inbound message reception error\n"); - out_be32((void *)&msg_regs->isr, RIO_MSG_ISR_TE); - goto out; - } - - /* XXX Need to check/dispatch until queue empty */ - if (isr & RIO_MSG_ISR_DIQI) { - /* - * We implement *only* mailbox 0, but can receive messages - * for any mailbox/letter to that mailbox destination. So, - * make the callback with an unknown/invalid mailbox number - * argument. - */ - port->inb_msg[0].mcback(port, msg_rx_ring.dev_id, -1, -1); - - /* Ack the queueing interrupt */ - out_be32((void *)&msg_regs->isr, RIO_MSG_ISR_DIQI); - } - - out: - return IRQ_HANDLED; -} - -/** - * rio_open_inb_mbox - Initialize MPC85xx inbound mailbox - * @mport: Master port implementing the inbound message unit - * @dev_id: Device specific pointer to pass on event - * @mbox: Mailbox to open - * @entries: Number of entries in the inbound mailbox ring - * - * Initializes buffer ring, request the inbound message interrupt, - * and enables the inbound message unit. Returns %0 on success - * and %-EINVAL or %-ENOMEM on failure. - */ -int rio_open_inb_mbox(struct rio_mport *mport, void *dev_id, int mbox, int entries) -{ - int i, rc = 0; - - if ((entries < RIO_MIN_RX_RING_SIZE) || - (entries > RIO_MAX_RX_RING_SIZE) || (!is_power_of_2(entries))) { - rc = -EINVAL; - goto out; - } - - /* Initialize client buffer ring */ - msg_rx_ring.dev_id = dev_id; - msg_rx_ring.size = entries; - msg_rx_ring.rx_slot = 0; - for (i = 0; i < msg_rx_ring.size; i++) - msg_rx_ring.virt_buffer[i] = NULL; - - /* Initialize inbound message ring */ - if (!(msg_rx_ring.virt = dma_alloc_coherent(NULL, - msg_rx_ring.size * - RIO_MAX_MSG_SIZE, - &msg_rx_ring.phys, - GFP_KERNEL))) { - rc = -ENOMEM; - goto out; - } - - /* Point dequeue/enqueue pointers at first entry in ring */ - out_be32((void *)&msg_regs->ifqdpar, (u32) msg_rx_ring.phys); - out_be32((void *)&msg_regs->ifqepar, (u32) msg_rx_ring.phys); - - /* Clear interrupt status */ - out_be32((void *)&msg_regs->isr, 0x00000091); - - /* Hook up inbound message handler */ - if ((rc = - request_irq(MPC85xx_IRQ_RIO_RX, mpc85xx_rio_rx_handler, 0, - "msg_rx", (void *)mport)) < 0) { - dma_free_coherent(NULL, RIO_MSG_BUFFER_SIZE, - msg_tx_ring.virt_buffer[i], - msg_tx_ring.phys_buffer[i]); - goto out; - } - - /* - * Configure inbound message unit: - * Snooping - * 4KB max message size - * Unmask all interrupt sources - * Disable - */ - out_be32((void *)&msg_regs->imr, 0x001b0060); - - /* Set number of queue entries */ - out_be32((void *)&msg_regs->imr, - in_be32((void *)&msg_regs->imr) | - ((get_bitmask_order(entries) - 2) << 12)); - - /* Now enable the unit */ - out_be32((void *)&msg_regs->imr, in_be32((void *)&msg_regs->imr) | 0x1); - - out: - return rc; -} - -/** - * rio_close_inb_mbox - Shut down MPC85xx inbound mailbox - * @mport: Master port implementing the inbound message unit - * @mbox: Mailbox to close - * - * Disables the inbound message unit, free all buffers, and - * frees the inbound message interrupt. - */ -void rio_close_inb_mbox(struct rio_mport *mport, int mbox) -{ - /* Disable inbound message unit */ - out_be32((void *)&msg_regs->imr, 0); - - /* Free ring */ - dma_free_coherent(NULL, msg_rx_ring.size * RIO_MAX_MSG_SIZE, - msg_rx_ring.virt, msg_rx_ring.phys); - - /* Free interrupt */ - free_irq(MPC85xx_IRQ_RIO_RX, (void *)mport); -} - -/** - * rio_hw_add_inb_buffer - Add buffer to the MPC85xx inbound message queue - * @mport: Master port implementing the inbound message unit - * @mbox: Inbound mailbox number - * @buf: Buffer to add to inbound queue - * - * Adds the @buf buffer to the MPC85xx inbound message queue. Returns - * %0 on success or %-EINVAL on failure. - */ -int rio_hw_add_inb_buffer(struct rio_mport *mport, int mbox, void *buf) -{ - int rc = 0; - - pr_debug("RIO: rio_hw_add_inb_buffer(), msg_rx_ring.rx_slot %d\n", - msg_rx_ring.rx_slot); - - if (msg_rx_ring.virt_buffer[msg_rx_ring.rx_slot]) { - printk(KERN_ERR - "RIO: error adding inbound buffer %d, buffer exists\n", - msg_rx_ring.rx_slot); - rc = -EINVAL; - goto out; - } - - msg_rx_ring.virt_buffer[msg_rx_ring.rx_slot] = buf; - if (++msg_rx_ring.rx_slot == msg_rx_ring.size) - msg_rx_ring.rx_slot = 0; - - out: - return rc; -} - -EXPORT_SYMBOL_GPL(rio_hw_add_inb_buffer); - -/** - * rio_hw_get_inb_message - Fetch inbound message from the MPC85xx message unit - * @mport: Master port implementing the inbound message unit - * @mbox: Inbound mailbox number - * - * Gets the next available inbound message from the inbound message queue. - * A pointer to the message is returned on success or NULL on failure. - */ -void *rio_hw_get_inb_message(struct rio_mport *mport, int mbox) -{ - u32 imr; - u32 phys_buf, virt_buf; - void *buf = NULL; - int buf_idx; - - phys_buf = in_be32((void *)&msg_regs->ifqdpar); - - /* If no more messages, then bail out */ - if (phys_buf == in_be32((void *)&msg_regs->ifqepar)) - goto out2; - - virt_buf = (u32) msg_rx_ring.virt + (phys_buf - msg_rx_ring.phys); - buf_idx = (phys_buf - msg_rx_ring.phys) / RIO_MAX_MSG_SIZE; - buf = msg_rx_ring.virt_buffer[buf_idx]; - - if (!buf) { - printk(KERN_ERR - "RIO: inbound message copy failed, no buffers\n"); - goto out1; - } - - /* Copy max message size, caller is expected to allocate that big */ - memcpy(buf, (void *)virt_buf, RIO_MAX_MSG_SIZE); - - /* Clear the available buffer */ - msg_rx_ring.virt_buffer[buf_idx] = NULL; - - out1: - imr = in_be32((void *)&msg_regs->imr); - out_be32((void *)&msg_regs->imr, imr | RIO_MSG_IMR_MI); - - out2: - return buf; -} - -EXPORT_SYMBOL_GPL(rio_hw_get_inb_message); - -/** - * mpc85xx_rio_dbell_handler - MPC85xx doorbell interrupt handler - * @irq: Linux interrupt number - * @dev_instance: Pointer to interrupt-specific data - * - * Handles doorbell interrupts. Parses a list of registered - * doorbell event handlers and executes a matching event handler. - */ -static irqreturn_t -mpc85xx_rio_dbell_handler(int irq, void *dev_instance) -{ - int dsr; - struct rio_mport *port = (struct rio_mport *)dev_instance; - - dsr = in_be32((void *)&msg_regs->dsr); - - if (dsr & DOORBELL_DSR_TE) { - pr_info("RIO: doorbell reception error\n"); - out_be32((void *)&msg_regs->dsr, DOORBELL_DSR_TE); - goto out; - } - - if (dsr & DOORBELL_DSR_QFI) { - pr_info("RIO: doorbell queue full\n"); - out_be32((void *)&msg_regs->dsr, DOORBELL_DSR_QFI); - goto out; - } - - /* XXX Need to check/dispatch until queue empty */ - if (dsr & DOORBELL_DSR_DIQI) { - u32 dmsg = - (u32) dbell_ring.virt + - (in_be32((void *)&msg_regs->dqdpar) & 0xfff); - u32 dmr; - struct rio_dbell *dbell; - int found = 0; - - pr_debug - ("RIO: processing doorbell, sid %2.2x tid %2.2x info %4.4x\n", - DBELL_SID(dmsg), DBELL_TID(dmsg), DBELL_INF(dmsg)); - - list_for_each_entry(dbell, &port->dbells, node) { - if ((dbell->res->start <= DBELL_INF(dmsg)) && - (dbell->res->end >= DBELL_INF(dmsg))) { - found = 1; - break; - } - } - if (found) { - dbell->dinb(port, dbell->dev_id, DBELL_SID(dmsg), DBELL_TID(dmsg), - DBELL_INF(dmsg)); - } else { - pr_debug - ("RIO: spurious doorbell, sid %2.2x tid %2.2x info %4.4x\n", - DBELL_SID(dmsg), DBELL_TID(dmsg), DBELL_INF(dmsg)); - } - dmr = in_be32((void *)&msg_regs->dmr); - out_be32((void *)&msg_regs->dmr, dmr | DOORBELL_DMR_DI); - out_be32((void *)&msg_regs->dsr, DOORBELL_DSR_DIQI); - } - - out: - return IRQ_HANDLED; -} - -/** - * mpc85xx_rio_doorbell_init - MPC85xx doorbell interface init - * @mport: Master port implementing the inbound doorbell unit - * - * Initializes doorbell unit hardware and inbound DMA buffer - * ring. Called from mpc85xx_rio_setup(). Returns %0 on success - * or %-ENOMEM on failure. - */ -static int mpc85xx_rio_doorbell_init(struct rio_mport *mport) -{ - int rc = 0; - - /* Map outbound doorbell window immediately after maintenance window */ - if (!(dbell_win = - (u32) ioremap(mport->iores.start + RIO_MAINT_WIN_SIZE, - RIO_DBELL_WIN_SIZE))) { - printk(KERN_ERR - "RIO: unable to map outbound doorbell window\n"); - rc = -ENOMEM; - goto out; - } - - /* Initialize inbound doorbells */ - if (!(dbell_ring.virt = dma_alloc_coherent(NULL, - 512 * DOORBELL_MESSAGE_SIZE, - &dbell_ring.phys, - GFP_KERNEL))) { - printk(KERN_ERR "RIO: unable allocate inbound doorbell ring\n"); - rc = -ENOMEM; - iounmap((void *)dbell_win); - goto out; - } - - /* Point dequeue/enqueue pointers at first entry in ring */ - out_be32((void *)&msg_regs->dqdpar, (u32) dbell_ring.phys); - out_be32((void *)&msg_regs->dqepar, (u32) dbell_ring.phys); - - /* Clear interrupt status */ - out_be32((void *)&msg_regs->dsr, 0x00000091); - - /* Hook up doorbell handler */ - if ((rc = - request_irq(MPC85xx_IRQ_RIO_BELL, mpc85xx_rio_dbell_handler, 0, - "dbell_rx", (void *)mport) < 0)) { - iounmap((void *)dbell_win); - dma_free_coherent(NULL, 512 * DOORBELL_MESSAGE_SIZE, - dbell_ring.virt, dbell_ring.phys); - printk(KERN_ERR - "MPC85xx RIO: unable to request inbound doorbell irq"); - goto out; - } - - /* Configure doorbells for snooping, 512 entries, and enable */ - out_be32((void *)&msg_regs->dmr, 0x00108161); - - out: - return rc; -} - -static char *cmdline = NULL; - -static int mpc85xx_rio_get_hdid(int index) -{ - /* XXX Need to parse multiple entries in some format */ - if (!cmdline) - return -1; - - return simple_strtol(cmdline, NULL, 0); -} - -static int mpc85xx_rio_get_cmdline(char *s) -{ - if (!s) - return 0; - - cmdline = s; - return 1; -} - -__setup("riohdid=", mpc85xx_rio_get_cmdline); - -/** - * mpc85xx_rio_setup - Setup MPC85xx RapidIO interface - * @law_start: Starting physical address of RapidIO LAW - * @law_size: Size of RapidIO LAW - * - * Initializes MPC85xx RapidIO hardware interface, configures - * master port with system-specific info, and registers the - * master port with the RapidIO subsystem. - */ -void mpc85xx_rio_setup(int law_start, int law_size) -{ - struct rio_ops *ops; - struct rio_mport *port; - - ops = kmalloc(sizeof(struct rio_ops), GFP_KERNEL); - ops->lcread = mpc85xx_local_config_read; - ops->lcwrite = mpc85xx_local_config_write; - ops->cread = mpc85xx_rio_config_read; - ops->cwrite = mpc85xx_rio_config_write; - ops->dsend = mpc85xx_rio_doorbell_send; - - port = kmalloc(sizeof(struct rio_mport), GFP_KERNEL); - port->id = 0; - port->index = 0; - INIT_LIST_HEAD(&port->dbells); - port->iores.start = law_start; - port->iores.end = law_start + law_size; - port->iores.flags = IORESOURCE_MEM; - - rio_init_dbell_res(&port->riores[RIO_DOORBELL_RESOURCE], 0, 0xffff); - rio_init_mbox_res(&port->riores[RIO_INB_MBOX_RESOURCE], 0, 0); - rio_init_mbox_res(&port->riores[RIO_OUTB_MBOX_RESOURCE], 0, 0); - strcpy(port->name, "RIO0 mport"); - - port->ops = ops; - port->host_deviceid = mpc85xx_rio_get_hdid(port->id); - - rio_register_mport(port); - - regs_win = (u32) ioremap(RIO_REGS_BASE, 0x20000); - atmu_regs = (struct rio_atmu_regs *)(regs_win + RIO_ATMU_REGS_OFFSET); - maint_atmu_regs = atmu_regs + 1; - dbell_atmu_regs = atmu_regs + 2; - msg_regs = (struct rio_msg_regs *)(regs_win + RIO_MSG_REGS_OFFSET); - - /* Configure maintenance transaction window */ - out_be32((void *)&maint_atmu_regs->rowbar, 0x000c0000); - out_be32((void *)&maint_atmu_regs->rowar, 0x80077015); - - maint_win = (u32) ioremap(law_start, RIO_MAINT_WIN_SIZE); - - /* Configure outbound doorbell window */ - out_be32((void *)&dbell_atmu_regs->rowbar, 0x000c0400); - out_be32((void *)&dbell_atmu_regs->rowar, 0x8004200b); - mpc85xx_rio_doorbell_init(port); -} diff --git a/arch/ppc/syslib/ppc85xx_rio.h b/arch/ppc/syslib/ppc85xx_rio.h deleted file mode 100644 index 6d3ff30b1579..000000000000 --- a/arch/ppc/syslib/ppc85xx_rio.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * MPC85xx RapidIO definitions - * - * Copyright 2005 MontaVista Software, Inc. - * Matt Porter <mporter@kernel.crashing.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#ifndef __PPC_SYSLIB_PPC85XX_RIO_H -#define __PPC_SYSLIB_PPC85XX_RIO_H - -#include <linux/init.h> - -extern void mpc85xx_rio_setup(int law_start, int law_size); - -#endif /* __PPC_SYSLIB_PPC85XX_RIO_H */ diff --git a/arch/ppc/syslib/ppc85xx_setup.c b/arch/ppc/syslib/ppc85xx_setup.c deleted file mode 100644 index 2475ec6600fe..000000000000 --- a/arch/ppc/syslib/ppc85xx_setup.c +++ /dev/null @@ -1,367 +0,0 @@ -/* - * MPC85XX common board code - * - * Maintainer: Kumar Gala <galak@kernel.crashing.org> - * - * Copyright 2004 Freescale Semiconductor Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include <linux/types.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/pci.h> -#include <linux/serial.h> -#include <linux/tty.h> /* for linux/serial_core.h */ -#include <linux/serial_core.h> -#include <linux/serial_8250.h> - -#include <asm/time.h> -#include <asm/mpc85xx.h> -#include <asm/immap_85xx.h> -#include <asm/mmu.h> -#include <asm/ppc_sys.h> -#include <asm/kgdb.h> -#include <asm/machdep.h> - -#include <syslib/ppc85xx_setup.h> - -extern void abort(void); - -/* Return the amount of memory */ -unsigned long __init -mpc85xx_find_end_of_memory(void) -{ - bd_t *binfo; - - binfo = (bd_t *) __res; - - return binfo->bi_memsize; -} - -/* The decrementer counts at the system (internal) clock freq divided by 8 */ -void __init -mpc85xx_calibrate_decr(void) -{ - bd_t *binfo = (bd_t *) __res; - unsigned int freq, divisor; - - /* get the core frequency */ - freq = binfo->bi_busfreq; - - /* The timebase is updated every 8 bus clocks, HID0[SEL_TBCLK] = 0 */ - divisor = 8; - tb_ticks_per_jiffy = freq / divisor / HZ; - tb_to_us = mulhwu_scale_factor(freq / divisor, 1000000); - - /* Set the time base to zero */ - mtspr(SPRN_TBWL, 0); - mtspr(SPRN_TBWU, 0); - - /* Clear any pending timer interrupts */ - mtspr(SPRN_TSR, TSR_ENW | TSR_WIS | TSR_DIS | TSR_FIS); - - /* Enable decrementer interrupt */ - mtspr(SPRN_TCR, TCR_DIE); -} - -#ifdef CONFIG_SERIAL_8250 -void __init -mpc85xx_early_serial_map(void) -{ -#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB) - struct uart_port serial_req; -#endif - struct plat_serial8250_port *pdata; - bd_t *binfo = (bd_t *) __res; - pdata = (struct plat_serial8250_port *) ppc_sys_get_pdata(MPC85xx_DUART); - - /* Setup serial port access */ - pdata[0].uartclk = binfo->bi_busfreq; - pdata[0].mapbase += binfo->bi_immr_base; - pdata[0].membase = ioremap(pdata[0].mapbase, MPC85xx_UART0_SIZE); - -#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB) - memset(&serial_req, 0, sizeof (serial_req)); - serial_req.iotype = UPIO_MEM; - serial_req.mapbase = pdata[0].mapbase; - serial_req.membase = pdata[0].membase; - serial_req.regshift = 0; - - gen550_init(0, &serial_req); -#endif - - pdata[1].uartclk = binfo->bi_busfreq; - pdata[1].mapbase += binfo->bi_immr_base; - pdata[1].membase = ioremap(pdata[1].mapbase, MPC85xx_UART0_SIZE); - -#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB) - /* Assume gen550_init() doesn't modify serial_req */ - serial_req.mapbase = pdata[1].mapbase; - serial_req.membase = pdata[1].membase; - - gen550_init(1, &serial_req); -#endif -} -#endif - -void -mpc85xx_restart(char *cmd) -{ - local_irq_disable(); - abort(); -} - -void -mpc85xx_power_off(void) -{ - local_irq_disable(); - for(;;); -} - -void -mpc85xx_halt(void) -{ - local_irq_disable(); - for(;;); -} - -#ifdef CONFIG_PCI - -#if defined(CONFIG_MPC8555_CDS) || defined(CONFIG_MPC8548_CDS) -extern void mpc85xx_cds_enable_via(struct pci_controller *hose); -extern void mpc85xx_cds_fixup_via(struct pci_controller *hose); -#endif - -static void __init -mpc85xx_setup_pci1(struct pci_controller *hose) -{ - volatile struct ccsr_pci *pci; - volatile struct ccsr_guts *guts; - unsigned short temps; - bd_t *binfo = (bd_t *) __res; - - pci = ioremap(binfo->bi_immr_base + MPC85xx_PCI1_OFFSET, - MPC85xx_PCI1_SIZE); - - guts = ioremap(binfo->bi_immr_base + MPC85xx_GUTS_OFFSET, - MPC85xx_GUTS_SIZE); - - early_read_config_word(hose, 0, 0, PCI_COMMAND, &temps); - temps |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; - early_write_config_word(hose, 0, 0, PCI_COMMAND, temps); - -#define PORDEVSR_PCI (0x00800000) /* PCI Mode */ - if (guts->pordevsr & PORDEVSR_PCI) { - early_write_config_byte(hose, 0, 0, PCI_LATENCY_TIMER, 0x80); - } else { - /* PCI-X init */ - temps = PCI_X_CMD_MAX_SPLIT | PCI_X_CMD_MAX_READ - | PCI_X_CMD_ERO | PCI_X_CMD_DPERR_E; - early_write_config_word(hose, 0, 0, PCIX_COMMAND, temps); - } - - /* Disable all windows (except powar0 since its ignored) */ - pci->powar1 = 0; - pci->powar2 = 0; - pci->powar3 = 0; - pci->powar4 = 0; - pci->piwar1 = 0; - pci->piwar2 = 0; - pci->piwar3 = 0; - - /* Setup Phys:PCI 1:1 outbound mem window @ MPC85XX_PCI1_LOWER_MEM */ - pci->potar1 = (MPC85XX_PCI1_LOWER_MEM >> 12) & 0x000fffff; - pci->potear1 = 0x00000000; - pci->powbar1 = (MPC85XX_PCI1_LOWER_MEM >> 12) & 0x000fffff; - /* Enable, Mem R/W */ - pci->powar1 = 0x80044000 | - (__ilog2(MPC85XX_PCI1_UPPER_MEM - MPC85XX_PCI1_LOWER_MEM + 1) - 1); - - /* Setup outbound IO windows @ MPC85XX_PCI1_IO_BASE */ - pci->potar2 = (MPC85XX_PCI1_LOWER_IO >> 12) & 0x000fffff; - pci->potear2 = 0x00000000; - pci->powbar2 = (MPC85XX_PCI1_IO_BASE >> 12) & 0x000fffff; - /* Enable, IO R/W */ - pci->powar2 = 0x80088000 | (__ilog2(MPC85XX_PCI1_IO_SIZE) - 1); - - /* Setup 2G inbound Memory Window @ 0 */ - pci->pitar1 = 0x00000000; - pci->piwbar1 = 0x00000000; - pci->piwar1 = 0xa0f5501e; /* Enable, Prefetch, Local - Mem, Snoop R/W, 2G */ -} - - -extern int mpc85xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin); -extern int mpc85xx_exclude_device(u_char bus, u_char devfn); - -#ifdef CONFIG_85xx_PCI2 -static void __init -mpc85xx_setup_pci2(struct pci_controller *hose) -{ - volatile struct ccsr_pci *pci; - unsigned short temps; - bd_t *binfo = (bd_t *) __res; - - pci = ioremap(binfo->bi_immr_base + MPC85xx_PCI2_OFFSET, - MPC85xx_PCI2_SIZE); - - early_read_config_word(hose, hose->bus_offset, 0, PCI_COMMAND, &temps); - temps |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; - early_write_config_word(hose, hose->bus_offset, 0, PCI_COMMAND, temps); - early_write_config_byte(hose, hose->bus_offset, 0, PCI_LATENCY_TIMER, 0x80); - - /* Disable all windows (except powar0 since its ignored) */ - pci->powar1 = 0; - pci->powar2 = 0; - pci->powar3 = 0; - pci->powar4 = 0; - pci->piwar1 = 0; - pci->piwar2 = 0; - pci->piwar3 = 0; - - /* Setup Phys:PCI 1:1 outbound mem window @ MPC85XX_PCI2_LOWER_MEM */ - pci->potar1 = (MPC85XX_PCI2_LOWER_MEM >> 12) & 0x000fffff; - pci->potear1 = 0x00000000; - pci->powbar1 = (MPC85XX_PCI2_LOWER_MEM >> 12) & 0x000fffff; - /* Enable, Mem R/W */ - pci->powar1 = 0x80044000 | - (__ilog2(MPC85XX_PCI2_UPPER_MEM - MPC85XX_PCI2_LOWER_MEM + 1) - 1); - - /* Setup outbound IO windows @ MPC85XX_PCI2_IO_BASE */ - pci->potar2 = (MPC85XX_PCI2_LOWER_IO >> 12) & 0x000fffff; - pci->potear2 = 0x00000000; - pci->powbar2 = (MPC85XX_PCI2_IO_BASE >> 12) & 0x000fffff; - /* Enable, IO R/W */ - pci->powar2 = 0x80088000 | (__ilog2(MPC85XX_PCI2_IO_SIZE) - 1); - - /* Setup 2G inbound Memory Window @ 0 */ - pci->pitar1 = 0x00000000; - pci->piwbar1 = 0x00000000; - pci->piwar1 = 0xa0f5501e; /* Enable, Prefetch, Local - Mem, Snoop R/W, 2G */ -} -#endif /* CONFIG_85xx_PCI2 */ - -int mpc85xx_pci1_last_busno = 0; - -void __init -mpc85xx_setup_hose(void) -{ - struct pci_controller *hose_a; -#ifdef CONFIG_85xx_PCI2 - struct pci_controller *hose_b; -#endif - bd_t *binfo = (bd_t *) __res; - - hose_a = pcibios_alloc_controller(); - - if (!hose_a) - return; - - ppc_md.pci_swizzle = common_swizzle; - ppc_md.pci_map_irq = mpc85xx_map_irq; - - hose_a->first_busno = 0; - hose_a->bus_offset = 0; - hose_a->last_busno = 0xff; - - setup_indirect_pci(hose_a, binfo->bi_immr_base + PCI1_CFG_ADDR_OFFSET, - binfo->bi_immr_base + PCI1_CFG_DATA_OFFSET); - hose_a->set_cfg_type = 1; - - mpc85xx_setup_pci1(hose_a); - - hose_a->pci_mem_offset = MPC85XX_PCI1_MEM_OFFSET; - hose_a->mem_space.start = MPC85XX_PCI1_LOWER_MEM; - hose_a->mem_space.end = MPC85XX_PCI1_UPPER_MEM; - - hose_a->io_space.start = MPC85XX_PCI1_LOWER_IO; - hose_a->io_space.end = MPC85XX_PCI1_UPPER_IO; - hose_a->io_base_phys = MPC85XX_PCI1_IO_BASE; -#ifdef CONFIG_85xx_PCI2 - hose_a->io_base_virt = ioremap(MPC85XX_PCI1_IO_BASE, - MPC85XX_PCI1_IO_SIZE + - MPC85XX_PCI2_IO_SIZE); -#else - hose_a->io_base_virt = ioremap(MPC85XX_PCI1_IO_BASE, - MPC85XX_PCI1_IO_SIZE); -#endif - isa_io_base = (unsigned long)hose_a->io_base_virt; - - /* setup resources */ - pci_init_resource(&hose_a->mem_resources[0], - MPC85XX_PCI1_LOWER_MEM, - MPC85XX_PCI1_UPPER_MEM, - IORESOURCE_MEM, "PCI1 host bridge"); - - pci_init_resource(&hose_a->io_resource, - MPC85XX_PCI1_LOWER_IO, - MPC85XX_PCI1_UPPER_IO, - IORESOURCE_IO, "PCI1 host bridge"); - - ppc_md.pci_exclude_device = mpc85xx_exclude_device; - -#if defined(CONFIG_MPC8555_CDS) || defined(CONFIG_MPC8548_CDS) - /* Pre pciauto_bus_scan VIA init */ - mpc85xx_cds_enable_via(hose_a); -#endif - - hose_a->last_busno = pciauto_bus_scan(hose_a, hose_a->first_busno); - -#if defined(CONFIG_MPC8555_CDS) || defined(CONFIG_MPC8548_CDS) - /* Post pciauto_bus_scan VIA fixup */ - mpc85xx_cds_fixup_via(hose_a); -#endif - -#ifdef CONFIG_85xx_PCI2 - hose_b = pcibios_alloc_controller(); - - if (!hose_b) - return; - - hose_b->bus_offset = hose_a->last_busno + 1; - hose_b->first_busno = hose_a->last_busno + 1; - hose_b->last_busno = 0xff; - - setup_indirect_pci(hose_b, binfo->bi_immr_base + PCI2_CFG_ADDR_OFFSET, - binfo->bi_immr_base + PCI2_CFG_DATA_OFFSET); - hose_b->set_cfg_type = 1; - - mpc85xx_setup_pci2(hose_b); - - hose_b->pci_mem_offset = MPC85XX_PCI2_MEM_OFFSET; - hose_b->mem_space.start = MPC85XX_PCI2_LOWER_MEM; - hose_b->mem_space.end = MPC85XX_PCI2_UPPER_MEM; - - hose_b->io_space.start = MPC85XX_PCI2_LOWER_IO; - hose_b->io_space.end = MPC85XX_PCI2_UPPER_IO; - hose_b->io_base_phys = MPC85XX_PCI2_IO_BASE; - hose_b->io_base_virt = hose_a->io_base_virt + MPC85XX_PCI1_IO_SIZE; - - /* setup resources */ - pci_init_resource(&hose_b->mem_resources[0], - MPC85XX_PCI2_LOWER_MEM, - MPC85XX_PCI2_UPPER_MEM, - IORESOURCE_MEM, "PCI2 host bridge"); - - pci_init_resource(&hose_b->io_resource, - MPC85XX_PCI2_LOWER_IO, - MPC85XX_PCI2_UPPER_IO, - IORESOURCE_IO, "PCI2 host bridge"); - - hose_b->last_busno = pciauto_bus_scan(hose_b, hose_b->first_busno); - - /* let board code know what the last bus number was on PCI1 */ - mpc85xx_pci1_last_busno = hose_a->last_busno; -#endif - return; -} -#endif /* CONFIG_PCI */ - - diff --git a/arch/ppc/syslib/ppc85xx_setup.h b/arch/ppc/syslib/ppc85xx_setup.h deleted file mode 100644 index 6ff79995210b..000000000000 --- a/arch/ppc/syslib/ppc85xx_setup.h +++ /dev/null @@ -1,56 +0,0 @@ -/* - * MPC85XX common board definitions - * - * Maintainer: Kumar Gala <galak@kernel.crashing.org> - * - * Copyright 2004 Freescale Semiconductor Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -#ifndef __PPC_SYSLIB_PPC85XX_SETUP_H -#define __PPC_SYSLIB_PPC85XX_SETUP_H - -#include <linux/init.h> -#include <asm/ppcboot.h> - -extern unsigned long mpc85xx_find_end_of_memory(void) __init; -extern void mpc85xx_calibrate_decr(void) __init; -extern void mpc85xx_early_serial_map(void) __init; -extern void mpc85xx_restart(char *cmd); -extern void mpc85xx_power_off(void); -extern void mpc85xx_halt(void); -extern void mpc85xx_setup_hose(void) __init; - -/* PCI config */ -#define PCI1_CFG_ADDR_OFFSET (0x8000) -#define PCI1_CFG_DATA_OFFSET (0x8004) - -#define PCI2_CFG_ADDR_OFFSET (0x9000) -#define PCI2_CFG_DATA_OFFSET (0x9004) - -/* Additional register for PCI-X configuration */ -#define PCIX_NEXT_CAP 0x60 -#define PCIX_CAP_ID 0x61 -#define PCIX_COMMAND 0x62 -#define PCIX_STATUS 0x64 - -/* Serial Config */ -#ifdef CONFIG_SERIAL_MANY_PORTS -#define RS_TABLE_SIZE 64 -#else -#define RS_TABLE_SIZE 2 -#endif - -#ifndef BASE_BAUD -#define BASE_BAUD 115200 -#endif - -/* Offset of CPM register space */ -#define CPM_MAP_ADDR (CCSRBAR + MPC85xx_CPM_OFFSET) - -#endif /* __PPC_SYSLIB_PPC85XX_SETUP_H */ diff --git a/arch/ppc/syslib/ppc8xx_pic.c b/arch/ppc/syslib/ppc8xx_pic.c index e8619c750732..bce9a75c80e3 100644 --- a/arch/ppc/syslib/ppc8xx_pic.c +++ b/arch/ppc/syslib/ppc8xx_pic.c @@ -16,7 +16,7 @@ extern int cpm_get_irq(void); * the only interrupt controller. Some boards, like the MBX and * Sandpoint have the 8259 as a secondary controller. Depending * upon the processor type, the internal controller can have as - * few as 16 interrups or as many as 64. We could use the + * few as 16 interrupts or as many as 64. We could use the * "clear_bit()" and "set_bit()" functions like other platforms, * but they are overkill for us. */ diff --git a/arch/ppc/syslib/ppc8xx_pic.h b/arch/ppc/syslib/ppc8xx_pic.h index d7d9f651a91b..53bcd97ef7f5 100644 --- a/arch/ppc/syslib/ppc8xx_pic.h +++ b/arch/ppc/syslib/ppc8xx_pic.h @@ -6,7 +6,6 @@ extern struct hw_interrupt_type ppc8xx_pic; -void m8xx_pic_init(void); void m8xx_do_IRQ(struct pt_regs *regs, int cpu); int m8xx_get_irq(struct pt_regs *regs); diff --git a/arch/ppc/syslib/ppc_sys.c b/arch/ppc/syslib/ppc_sys.c index 2d48018b71d9..837183c24dfc 100644 --- a/arch/ppc/syslib/ppc_sys.c +++ b/arch/ppc/syslib/ppc_sys.c @@ -185,7 +185,7 @@ void platform_notify_map(const struct platform_notify_dev_map *map, */ /* - Here we'll replace .name pointers with fixed-lenght strings + Here we'll replace .name pointers with fixed-length strings Hereby, this should be called *before* any func stuff triggeded. */ void ppc_sys_device_initfunc(void) diff --git a/arch/ppc/xmon/start.c b/arch/ppc/xmon/start.c index 8f0b953179fa..9056fe58aaa1 100644 --- a/arch/ppc/xmon/start.c +++ b/arch/ppc/xmon/start.c @@ -10,7 +10,6 @@ #include <linux/sysrq.h> #include <linux/bitops.h> #include <asm/xmon.h> -#include <asm/machdep.h> #include <asm/errno.h> #include <asm/processor.h> #include <asm/delay.h> diff --git a/arch/ppc/xmon/start_8xx.c b/arch/ppc/xmon/start_8xx.c index a48bd594cf61..30974068c223 100644 --- a/arch/ppc/xmon/start_8xx.c +++ b/arch/ppc/xmon/start_8xx.c @@ -14,7 +14,7 @@ #include <linux/kernel.h> #include <asm/8xx_immap.h> #include <asm/mpc8xx.h> -#include <asm/commproc.h> +#include <asm/cpm1.h> extern void xmon_printf(const char *fmt, ...); extern int xmon_8xx_write(char *str, int nb); |
