diff options
Diffstat (limited to 'arch/ppc64')
76 files changed, 10 insertions, 21935 deletions
diff --git a/arch/ppc64/Kconfig b/arch/ppc64/Kconfig deleted file mode 100644 index 2130cc315957..000000000000 --- a/arch/ppc64/Kconfig +++ /dev/null @@ -1,510 +0,0 @@ -# -# For a description of the syntax of this configuration file, -# see Documentation/kbuild/kconfig-language.txt. -# - -config 64BIT - def_bool y - -config MMU - bool - default y - -config PPC_STD_MMU - def_bool y - -config UID16 - bool - -config RWSEM_GENERIC_SPINLOCK - bool - -config RWSEM_XCHGADD_ALGORITHM - bool - default y - -config GENERIC_CALIBRATE_DELAY - bool - default y - -config GENERIC_ISA_DMA - bool - default y - -config EARLY_PRINTK - bool - default y - -config COMPAT - bool - default y - -config SCHED_NO_NO_OMIT_FRAME_POINTER - bool - default y - -config ARCH_MAY_HAVE_PC_FDC - bool - default y - -config PPC_STD_MMU - bool - default y - -# We optimistically allocate largepages from the VM, so make the limit -# large enough (16MB). This badly named config option is actually -# max order + 1 -config FORCE_MAX_ZONEORDER - int - default "13" - -source "init/Kconfig" - -config SYSVIPC_COMPAT - bool - depends on COMPAT && SYSVIPC - default y - -menu "Platform support" - -choice - prompt "Platform Type" - default PPC_MULTIPLATFORM - -config PPC_ISERIES - bool "IBM Legacy iSeries" - -config PPC_MULTIPLATFORM - bool "Generic" - -endchoice - -config PPC_PSERIES - depends on PPC_MULTIPLATFORM - bool " IBM pSeries & new iSeries" - default y - -config PPC_BPA - bool " Broadband Processor Architecture" - depends on PPC_MULTIPLATFORM - -config PPC_PMAC - depends on PPC_MULTIPLATFORM - bool " Apple G5 based machines" - default y - select U3_DART - select GENERIC_TBSYNC - -config PPC_MAPLE - depends on PPC_MULTIPLATFORM - bool " Maple 970FX Evaluation Board" - select U3_DART - select MPIC_BROKEN_U3 - select GENERIC_TBSYNC - default n - help - This option enables support for the Maple 970FX Evaluation Board. - For more informations, refer to <http://www.970eval.com> - -config PPC - bool - default y - -config PPC64 - bool - default y - -config PPC_OF - depends on PPC_MULTIPLATFORM - bool - default y - -config XICS - depends on PPC_PSERIES - bool - default y - -config MPIC - depends on PPC_PSERIES || PPC_PMAC || PPC_MAPLE - bool - default y - -config PPC_I8259 - depends on PPC_PSERIES - bool - default y - -config BPA_IIC - depends on PPC_BPA - bool - default y - -# VMX is pSeries only for now until somebody writes the iSeries -# exception vectors for it -config ALTIVEC - bool "Support for VMX (Altivec) vector unit" - depends on PPC_MULTIPLATFORM - default y - -config PPC_SPLPAR - depends on PPC_PSERIES - bool "Support for shared-processor logical partitions" - default n - help - Enabling this option will make the kernel run more efficiently - on logically-partitioned pSeries systems which use shared - processors, that is, which share physical processors between - two or more partitions. - -config KEXEC - bool "kexec system call (EXPERIMENTAL)" - depends on PPC_MULTIPLATFORM && EXPERIMENTAL - help - kexec is a system call that implements the ability to shutdown your - current kernel, and to start another kernel. It is like a reboot - but it is indepedent of the system firmware. And like a reboot - you can start any kernel with it, not just Linux. - - The name comes from the similiarity to the exec system call. - - It is an ongoing process to be certain the hardware in a machine - is properly shutdown, so do not be surprised if this code does not - initially work for you. It may help to enable device hotplugging - support. As of this writing the exact hardware interface is - strongly in flux, so no good recommendation can be made. - -config IBMVIO - depends on PPC_PSERIES || PPC_ISERIES - bool - default y - -config U3_DART - bool - depends on PPC_MULTIPLATFORM - default n - -config MPIC_BROKEN_U3 - bool - depends on PPC_MAPLE - default y - -config GENERIC_TBSYNC - def_bool n - -config PPC_PMAC64 - bool - depends on PPC_PMAC - default y - -config BOOTX_TEXT - bool "Support for early boot text console" - depends PPC_OF - help - Say Y here to see progress messages from the boot firmware in text - mode. Requires an Open Firmware compatible video card. - -config POWER4 - def_bool y - -config PPC_FPU - def_bool y - -config POWER4_ONLY - bool "Optimize for POWER4" - default n - ---help--- - Cause the compiler to optimize for POWER4 processors. The resulting - binary will not work on POWER3 or RS64 processors when compiled with - binutils 2.15 or later. - -config IOMMU_VMERGE - bool "Enable IOMMU virtual merging (EXPERIMENTAL)" - depends on EXPERIMENTAL - default n - help - Cause IO segments sent to a device for DMA to be merged virtually - by the IOMMU when they happen to have been allocated contiguously. - This doesn't add pressure to the IOMMU allocator. However, some - drivers don't support getting large merged segments coming back - from *_map_sg(). Say Y if you know the drivers you are using are - properly handling this case. - -config SMP - bool "Symmetric multi-processing support" - ---help--- - This enables support for systems with more than one CPU. If you have - a system with only one CPU, say N. If you have a system with more - than one CPU, say Y. - - If you say N here, the kernel will run on single and multiprocessor - machines, but will use only one CPU of a multiprocessor machine. If - you say Y here, the kernel will run on single-processor machines. - On a single-processor machine, the kernel will run faster if you say - N here. - - If you don't know what to do here, say Y. - -config NR_CPUS - int "Maximum number of CPUs (2-128)" - range 2 128 - depends on SMP - default "32" - -config HMT - bool "Hardware multithreading" - depends on SMP && PPC_PSERIES && BROKEN - help - This option enables hardware multithreading on RS64 cpus. - pSeries systems p620 and p660 have such a cpu type. - -config NUMA - bool "NUMA support" - default y if SMP && PPC_PSERIES - -config ARCH_SELECT_MEMORY_MODEL - def_bool y - -config ARCH_FLATMEM_ENABLE - def_bool y - depends on !NUMA - -config ARCH_DISCONTIGMEM_ENABLE - def_bool y - depends on SMP && PPC_PSERIES - -config ARCH_DISCONTIGMEM_DEFAULT - def_bool y - depends on ARCH_DISCONTIGMEM_ENABLE - -config ARCH_SPARSEMEM_ENABLE - def_bool y - depends on ARCH_DISCONTIGMEM_ENABLE - -source "mm/Kconfig" - -config HAVE_ARCH_EARLY_PFN_TO_NID - def_bool y - depends on NEED_MULTIPLE_NODES - -# Some NUMA nodes have memory ranges that span -# other nodes. Even though a pfn is valid and -# between a node's start and end pfns, it may not -# reside on that node. -# -# This is a relatively temporary hack that should -# be able to go away when sparsemem is fully in -# place -config NODES_SPAN_OTHER_NODES - def_bool y - depends on NEED_MULTIPLE_NODES - -config PPC_64K_PAGES - bool "64k page size" - help - This option changes the kernel logical page size to 64k. On machines - without processor support for 64k pages, the kernel will simulate - them by loading each individual 4k page on demand transparently, - while on hardware with such support, it will be used to map - normal application pages. - -config SCHED_SMT - bool "SMT (Hyperthreading) scheduler support" - depends on SMP - default off - help - SMT scheduler support improves the CPU scheduler's decision making - when dealing with POWER5 cpus at a cost of slightly increased - overhead in some places. If unsure say N here. - -source "kernel/Kconfig.preempt" -source kernel/Kconfig.hz - -config EEH - bool "PCI Extended Error Handling (EEH)" if EMBEDDED - depends on PPC_PSERIES - default y if !EMBEDDED - -# -# Use the generic interrupt handling code in kernel/irq/: -# -config GENERIC_HARDIRQS - bool - default y - -config PPC_RTAS - bool - depends on PPC_PSERIES || PPC_BPA - default y - -config RTAS_ERROR_LOGGING - bool - depends on PPC_RTAS - default y - -config RTAS_PROC - bool "Proc interface to RTAS" - depends on PPC_RTAS - default y - -config RTAS_FLASH - tristate "Firmware flash interface" - depends on RTAS_PROC - -config SCANLOG - tristate "Scanlog dump interface" - depends on RTAS_PROC && PPC_PSERIES - -config LPARCFG - tristate "LPAR Configuration Data" - depends on PPC_PSERIES || PPC_ISERIES - help - Provide system capacity information via human readable - <key word>=<value> pairs through a /proc/ppc64/lparcfg interface. - -config SECCOMP - bool "Enable seccomp to safely compute untrusted bytecode" - depends on PROC_FS - default y - help - This kernel feature is useful for number crunching applications - that may need to compute untrusted bytecode during their - execution. By using pipes or other transports made available to - the process as file descriptors supporting the read/write - syscalls, it's possible to isolate those applications in - their own address space using seccomp. Once seccomp is - enabled via /proc/<pid>/seccomp, it cannot be disabled - and the task is only allowed to execute a few safe syscalls - defined by each seccomp mode. - - If unsure, say Y. Only embedded should say N here. - -source "fs/Kconfig.binfmt" - -config HOTPLUG_CPU - bool "Support for hot-pluggable CPUs" - depends on SMP && EXPERIMENTAL && (PPC_PSERIES || PPC_PMAC) - select HOTPLUG - ---help--- - Say Y here to be able to turn CPUs off and on. - - Say N if you are unsure. - -config PROC_DEVICETREE - bool "Support for Open Firmware device tree in /proc" - help - This option adds a device-tree directory under /proc which contains - an image of the device tree that the kernel copies from Open - Firmware. If unsure, say Y here. - -config CMDLINE_BOOL - bool "Default bootloader kernel arguments" - depends on !PPC_ISERIES - -config CMDLINE - string "Initial kernel command string" - depends on CMDLINE_BOOL - default "console=ttyS0,9600 console=tty0 root=/dev/sda2" - help - On some platforms, there is currently no way for the boot loader to - pass arguments to the kernel. For these platforms, you can supply - some command-line options at build time by entering them here. In - most cases you will need to specify the root device here. - -endmenu - -config ISA_DMA_API - bool - default y - -menu "Bus Options" - -config ISA - bool - help - Find out whether you have ISA slots on your motherboard. ISA is the - name of a bus system, i.e. the way the CPU talks to the other stuff - inside your box. If you have an Apple machine, say N here; if you - have an IBM RS/6000 or pSeries machine or a PReP machine, say Y. If - you have an embedded board, consult your board documentation. - -config SBUS - bool - -config MCA - bool - -config EISA - bool - -config PCI - bool "support for PCI devices" if (EMBEDDED && PPC_ISERIES) - default y - help - Find out whether your system includes a PCI bus. PCI is the name of - a bus system, i.e. the way the CPU talks to the other stuff inside - your box. If you say Y here, the kernel will include drivers and - infrastructure code to support PCI bus devices. - -config PCI_DOMAINS - bool - default PCI - -source "drivers/pci/Kconfig" - -source "drivers/pcmcia/Kconfig" - -source "drivers/pci/hotplug/Kconfig" - -endmenu - -source "net/Kconfig" - -source "drivers/Kconfig" - -source "fs/Kconfig" - -menu "iSeries device drivers" - depends on PPC_ISERIES - -config VIOCONS - tristate "iSeries Virtual Console Support" - -config VIODASD - tristate "iSeries Virtual I/O disk support" - help - If you are running on an iSeries system and you want to use - virtual disks created and managed by OS/400, say Y. - -config VIOCD - tristate "iSeries Virtual I/O CD support" - help - If you are running Linux on an IBM iSeries system and you want to - read a CD drive owned by OS/400, say Y here. - -config VIOTAPE - tristate "iSeries Virtual Tape Support" - help - If you are running Linux on an iSeries system and you want Linux - to read and/or write a tape drive owned by OS/400, say Y here. - -endmenu - -config VIOPATH - bool - depends on VIOCONS || VIODASD || VIOCD || VIOTAPE || VETH - default y - -source "arch/powerpc/oprofile/Kconfig" - -source "arch/ppc64/Kconfig.debug" - -source "security/Kconfig" - -config KEYS_COMPAT - bool - depends on COMPAT && KEYS - default y - -source "crypto/Kconfig" - -source "lib/Kconfig" diff --git a/arch/ppc64/Kconfig.debug b/arch/ppc64/Kconfig.debug index f16a5030527b..b258c9314a1b 100644 --- a/arch/ppc64/Kconfig.debug +++ b/arch/ppc64/Kconfig.debug @@ -55,10 +55,6 @@ config XMON_DEFAULT xmon is normally disabled unless booted with 'xmon=on'. Use 'xmon=off' to disable xmon init during runtime. -config PPCDBG - bool "Include PPCDBG realtime debugging" - depends on DEBUG_KERNEL - config IRQSTACKS bool "Use separate kernel stacks when processing interrupts" help diff --git a/arch/ppc64/boot/Makefile b/arch/ppc64/boot/Makefile deleted file mode 100644 index 301bc1536c49..000000000000 --- a/arch/ppc64/boot/Makefile +++ /dev/null @@ -1,148 +0,0 @@ -# Makefile for making ELF bootable images for booting on CHRP -# using Open Firmware. -# -# Geert Uytterhoeven September 1997 -# -# Based on coffboot by Paul Mackerras -# Simplified for ppc64 by Todd Inglett -# -# NOTE: this code is built for 32 bit in ELF32 format even though -# it packages a 64 bit kernel. We do this to simplify the -# bootloader and increase compatibility with OpenFirmware. -# -# To this end we need to define BOOTCC, etc, as the tools -# needed to build the 32 bit image. These are normally HOSTCC, -# but may be a third compiler if, for example, you are cross -# compiling from an intel box. Once the 64bit ppc gcc is -# stable it will probably simply be a compiler switch to -# compile for 32bit mode. -# To make it easier to setup a cross compiler, -# CROSS32_COMPILE is setup as a prefix just like CROSS_COMPILE -# in the toplevel makefile. - - -HOSTCC := gcc -BOOTCFLAGS := $(HOSTCFLAGS) -fno-builtin -nostdinc -isystem $(shell $(CROSS32CC) -print-file-name=include) -fPIC -BOOTAFLAGS := -D__ASSEMBLY__ $(BOOTCFLAGS) -traditional -nostdinc -BOOTLFLAGS := -T $(srctree)/$(src)/zImage.lds -OBJCOPYFLAGS := contents,alloc,load,readonly,data - -zlib := infblock.c infcodes.c inffast.c inflate.c inftrees.c infutil.c -zlibheader := infblock.h infcodes.h inffast.h inftrees.h infutil.h -zliblinuxheader := zlib.h zconf.h zutil.h - -$(addprefix $(obj)/,$(zlib) main.o): $(addprefix $(obj)/,$(zliblinuxheader)) $(addprefix $(obj)/,$(zlibheader)) -#$(addprefix $(obj)/,main.o): $(addprefix $(obj)/,zlib.h) - -src-boot := string.S prom.c main.c div64.S crt0.S -src-boot += $(zlib) -src-boot := $(addprefix $(obj)/, $(src-boot)) -obj-boot := $(addsuffix .o, $(basename $(src-boot))) - -BOOTCFLAGS += -I$(obj) -I$(srctree)/$(obj) - -quiet_cmd_copy_zlib = COPY $@ - cmd_copy_zlib = sed "s@__attribute_used__@@;s@<linux/\([^>]\+\).*@\"\1\"@" $< > $@ - -quiet_cmd_copy_zlibheader = COPY $@ - cmd_copy_zlibheader = sed "s@<linux/\([^>]\+\).*@\"\1\"@" $< > $@ -# stddef.h for NULL -quiet_cmd_copy_zliblinuxheader = COPY $@ - cmd_copy_zliblinuxheader = sed "s@<linux/string.h>@\"string.h\"@;s@<linux/kernel.h>@<stddef.h>@;s@<linux/\([^>]\+\).*@\"\1\"@" $< > $@ - -$(addprefix $(obj)/,$(zlib)): $(obj)/%: $(srctree)/lib/zlib_inflate/% - $(call cmd,copy_zlib) - -$(addprefix $(obj)/,$(zlibheader)): $(obj)/%: $(srctree)/lib/zlib_inflate/% - $(call cmd,copy_zlibheader) - -$(addprefix $(obj)/,$(zliblinuxheader)): $(obj)/%: $(srctree)/include/linux/% - $(call cmd,copy_zliblinuxheader) - -clean-files := $(zlib) $(zlibheader) $(zliblinuxheader) - - -quiet_cmd_bootcc = BOOTCC $@ - cmd_bootcc = $(CROSS32CC) -Wp,-MD,$(depfile) $(BOOTCFLAGS) -c -o $@ $< - -quiet_cmd_bootas = BOOTAS $@ - cmd_bootas = $(CROSS32CC) -Wp,-MD,$(depfile) $(BOOTAFLAGS) -c -o $@ $< - -quiet_cmd_bootld = BOOTLD $@ - cmd_bootld = $(CROSS32LD) $(BOOTLFLAGS) -o $@ $(2) - -$(patsubst %.c,%.o, $(filter %.c, $(src-boot))): %.o: %.c - $(call if_changed_dep,bootcc) -$(patsubst %.S,%.o, $(filter %.S, $(src-boot))): %.o: %.S - $(call if_changed_dep,bootas) - -#----------------------------------------------------------- -# ELF sections within the zImage bootloader/wrapper -#----------------------------------------------------------- -required := vmlinux.strip -initrd := initrd - -obj-sec = $(foreach section, $(1), $(patsubst %,$(obj)/kernel-%.o, $(section))) -src-sec = $(foreach section, $(1), $(patsubst %,$(obj)/kernel-%.c, $(section))) -gz-sec = $(foreach section, $(1), $(patsubst %,$(obj)/kernel-%.gz, $(section))) - -hostprogs-y := addnote addRamDisk -targets += zImage.vmode zImage.initrd.vmode zImage zImage.initrd \ - $(patsubst $(obj)/%,%, $(call obj-sec, $(required) $(initrd))) \ - $(patsubst $(obj)/%,%, $(call src-sec, $(required) $(initrd))) \ - $(patsubst $(obj)/%,%, $(call gz-sec, $(required) $(initrd))) \ - vmlinux.initrd -extra-y := initrd.o - -quiet_cmd_ramdisk = RAMDISK $@ - cmd_ramdisk = $(obj)/addRamDisk $(obj)/ramdisk.image.gz $< $@ - -quiet_cmd_stripvm = STRIP $@ - cmd_stripvm = $(STRIP) -s $< -o $@ - -vmlinux.strip: vmlinux - $(call if_changed,stripvm) -$(obj)/vmlinux.initrd: vmlinux.strip $(obj)/addRamDisk $(obj)/ramdisk.image.gz - $(call if_changed,ramdisk) - -quiet_cmd_addsection = ADDSEC $@ - cmd_addsection = $(CROSS32OBJCOPY) $@ \ - --add-section=.kernel:$(strip $(patsubst $(obj)/kernel-%.o,%, $@))=$(patsubst %.o,%.gz, $@) \ - --set-section-flags=.kernel:$(strip $(patsubst $(obj)/kernel-%.o,%, $@))=$(OBJCOPYFLAGS) - -quiet_cmd_addnote = ADDNOTE $@ - cmd_addnote = $(obj)/addnote $@ - -$(call gz-sec, $(required)): $(obj)/kernel-%.gz: % - $(call if_changed,gzip) - -$(obj)/kernel-initrd.gz: $(obj)/ramdisk.image.gz - cp -f $(obj)/ramdisk.image.gz $@ - -$(call src-sec, $(required) $(initrd)): $(obj)/kernel-%.c: $(obj)/kernel-%.gz - @touch $@ - -$(call obj-sec, $(required) $(initrd)): $(obj)/kernel-%.o: $(obj)/kernel-%.c - $(call if_changed_dep,bootcc) - $(call cmd,addsection) - -$(obj)/zImage.vmode: obj-boot += $(call obj-sec, $(required)) -$(obj)/zImage.vmode: $(call obj-sec, $(required)) $(obj-boot) $(srctree)/$(src)/zImage.lds - $(call cmd,bootld,$(obj-boot)) - -$(obj)/zImage.initrd.vmode: obj-boot += $(call obj-sec, $(required) $(initrd)) -$(obj)/zImage.initrd.vmode: $(call obj-sec, $(required) $(initrd)) $(obj-boot) $(srctree)/$(src)/zImage.lds - $(call cmd,bootld,$(obj-boot)) - -$(obj)/zImage: $(obj)/zImage.vmode $(obj)/addnote - @cp -f $< $@ - $(call if_changed,addnote) - -$(obj)/zImage.initrd: $(obj)/zImage.initrd.vmode $(obj)/addnote - @cp -f $< $@ - $(call if_changed,addnote) - -install: $(CONFIGURE) $(BOOTIMAGE) - sh -x $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" vmlinux System.map "$(INSTALL_PATH)" "$(BOOTIMAGE)" - -clean-files := $(addprefix $(objtree)/, $(obj-boot) vmlinux.strip) diff --git a/arch/ppc64/boot/README b/arch/ppc64/boot/README deleted file mode 100644 index 3e11058760e4..000000000000 --- a/arch/ppc64/boot/README +++ /dev/null @@ -1,11 +0,0 @@ - -To extract the kernel vmlinux, System.map, .config or initrd from the zImage binary: - -objcopy -j .kernel:vmlinux -O binary zImage vmlinux.gz -objcopy -j .kernel:System.map -O binary zImage System.map.gz -objcopy -j .kernel:.config -O binary zImage config.gz -objcopy -j .kernel:initrd -O binary zImage.initrd initrd.gz - - - Peter - diff --git a/arch/ppc64/boot/addRamDisk.c b/arch/ppc64/boot/addRamDisk.c deleted file mode 100644 index 7f2c09473394..000000000000 --- a/arch/ppc64/boot/addRamDisk.c +++ /dev/null @@ -1,300 +0,0 @@ -#include <stdio.h> -#include <stdlib.h> -#include <netinet/in.h> -#include <unistd.h> -#include <sys/types.h> -#include <sys/stat.h> -#include <string.h> - -#define ElfHeaderSize (64 * 1024) -#define ElfPages (ElfHeaderSize / 4096) -#define KERNELBASE (0xc000000000000000) - -void get4k(FILE *file, char *buf ) -{ - unsigned j; - unsigned num = fread(buf, 1, 4096, file); - for ( j=num; j<4096; ++j ) - buf[j] = 0; -} - -void put4k(FILE *file, char *buf ) -{ - fwrite(buf, 1, 4096, file); -} - -void death(const char *msg, FILE *fdesc, const char *fname) -{ - fprintf(stderr, msg); - fclose(fdesc); - unlink(fname); - exit(1); -} - -int main(int argc, char **argv) -{ - char inbuf[4096]; - FILE *ramDisk = NULL; - FILE *sysmap = NULL; - FILE *inputVmlinux = NULL; - FILE *outputVmlinux = NULL; - - unsigned i = 0; - unsigned long ramFileLen = 0; - unsigned long ramLen = 0; - unsigned long roundR = 0; - - unsigned long sysmapFileLen = 0; - unsigned long sysmapLen = 0; - unsigned long sysmapPages = 0; - char* ptr_end = NULL; - unsigned long offset_end = 0; - - unsigned long kernelLen = 0; - unsigned long actualKernelLen = 0; - unsigned long round = 0; - unsigned long roundedKernelLen = 0; - unsigned long ramStartOffs = 0; - unsigned long ramPages = 0; - unsigned long roundedKernelPages = 0; - unsigned long hvReleaseData = 0; - u_int32_t eyeCatcher = 0xc8a5d9c4; - unsigned long naca = 0; - unsigned long xRamDisk = 0; - unsigned long xRamDiskSize = 0; - long padPages = 0; - - - if (argc < 2) { - fprintf(stderr, "Name of RAM disk file missing.\n"); - exit(1); - } - - if (argc < 3) { - fprintf(stderr, "Name of System Map input file is missing.\n"); - exit(1); - } - - if (argc < 4) { - fprintf(stderr, "Name of vmlinux file missing.\n"); - exit(1); - } - - if (argc < 5) { - fprintf(stderr, "Name of vmlinux output file missing.\n"); - exit(1); - } - - - ramDisk = fopen(argv[1], "r"); - if ( ! ramDisk ) { - fprintf(stderr, "RAM disk file \"%s\" failed to open.\n", argv[1]); - exit(1); - } - - sysmap = fopen(argv[2], "r"); - if ( ! sysmap ) { - fprintf(stderr, "System Map file \"%s\" failed to open.\n", argv[2]); - exit(1); - } - - inputVmlinux = fopen(argv[3], "r"); - if ( ! inputVmlinux ) { - fprintf(stderr, "vmlinux file \"%s\" failed to open.\n", argv[3]); - exit(1); - } - - outputVmlinux = fopen(argv[4], "w+"); - if ( ! outputVmlinux ) { - fprintf(stderr, "output vmlinux file \"%s\" failed to open.\n", argv[4]); - exit(1); - } - - - - /* Input Vmlinux file */ - fseek(inputVmlinux, 0, SEEK_END); - kernelLen = ftell(inputVmlinux); - fseek(inputVmlinux, 0, SEEK_SET); - printf("kernel file size = %d\n", kernelLen); - if ( kernelLen == 0 ) { - fprintf(stderr, "You must have a linux kernel specified as argv[3]\n"); - exit(1); - } - - actualKernelLen = kernelLen - ElfHeaderSize; - - printf("actual kernel length (minus ELF header) = %d\n", actualKernelLen); - - round = actualKernelLen % 4096; - roundedKernelLen = actualKernelLen; - if ( round ) - roundedKernelLen += (4096 - round); - printf("Vmlinux length rounded up to a 4k multiple = %ld/0x%lx \n", roundedKernelLen, roundedKernelLen); - roundedKernelPages = roundedKernelLen / 4096; - printf("Vmlinux pages to copy = %ld/0x%lx \n", roundedKernelPages, roundedKernelPages); - - - - /* Input System Map file */ - /* (needs to be processed simply to determine if we need to add pad pages due to the static variables not being included in the vmlinux) */ - fseek(sysmap, 0, SEEK_END); - sysmapFileLen = ftell(sysmap); - fseek(sysmap, 0, SEEK_SET); - printf("%s file size = %ld/0x%lx \n", argv[2], sysmapFileLen, sysmapFileLen); - - sysmapLen = sysmapFileLen; - - roundR = 4096 - (sysmapLen % 4096); - if (roundR) { - printf("Rounding System Map file up to a multiple of 4096, adding %ld/0x%lx \n", roundR, roundR); - sysmapLen += roundR; - } - printf("Rounded System Map size is %ld/0x%lx \n", sysmapLen, sysmapLen); - - /* Process the Sysmap file to determine where _end is */ - sysmapPages = sysmapLen / 4096; - /* read the whole file line by line, expect that it doesn't fail */ - while ( fgets(inbuf, 4096, sysmap) ) ; - /* search for _end in the last page of the system map */ - ptr_end = strstr(inbuf, " _end"); - if (!ptr_end) { - fprintf(stderr, "Unable to find _end in the sysmap file \n"); - fprintf(stderr, "inbuf: \n"); - fprintf(stderr, "%s \n", inbuf); - exit(1); - } - printf("Found _end in the last page of the sysmap - backing up 10 characters it looks like %s", ptr_end-10); - /* convert address of _end in system map to hex offset. */ - offset_end = (unsigned int)strtol(ptr_end-10, NULL, 16); - /* calc how many pages we need to insert between the vmlinux and the start of the ram disk */ - padPages = offset_end/4096 - roundedKernelPages; - - /* Check and see if the vmlinux is already larger than _end in System.map */ - if (padPages < 0) { - /* vmlinux is larger than _end - adjust the offset to the start of the embedded ram disk */ - offset_end = roundedKernelLen; - printf("vmlinux is larger than _end indicates it needs to be - offset_end = %lx \n", offset_end); - padPages = 0; - printf("will insert %lx pages between the vmlinux and the start of the ram disk \n", padPages); - } - else { - /* _end is larger than vmlinux - use the offset to _end that we calculated from the system map */ - printf("vmlinux is smaller than _end indicates is needed - offset_end = %lx \n", offset_end); - printf("will insert %lx pages between the vmlinux and the start of the ram disk \n", padPages); - } - - - - /* Input Ram Disk file */ - // Set the offset that the ram disk will be started at. - ramStartOffs = offset_end; /* determined from the input vmlinux file and the system map */ - printf("Ram Disk will start at offset = 0x%lx \n", ramStartOffs); - - fseek(ramDisk, 0, SEEK_END); - ramFileLen = ftell(ramDisk); - fseek(ramDisk, 0, SEEK_SET); - printf("%s file size = %ld/0x%lx \n", argv[1], ramFileLen, ramFileLen); - - ramLen = ramFileLen; - - roundR = 4096 - (ramLen % 4096); - if ( roundR ) { - printf("Rounding RAM disk file up to a multiple of 4096, adding %ld/0x%lx \n", roundR, roundR); - ramLen += roundR; - } - - printf("Rounded RAM disk size is %ld/0x%lx \n", ramLen, ramLen); - ramPages = ramLen / 4096; - printf("RAM disk pages to copy = %ld/0x%lx\n", ramPages, ramPages); - - - - // Copy 64K ELF header - for (i=0; i<(ElfPages); ++i) { - get4k( inputVmlinux, inbuf ); - put4k( outputVmlinux, inbuf ); - } - - /* Copy the vmlinux (as full pages). */ - fseek(inputVmlinux, ElfHeaderSize, SEEK_SET); - for ( i=0; i<roundedKernelPages; ++i ) { - get4k( inputVmlinux, inbuf ); - put4k( outputVmlinux, inbuf ); - } - - /* Insert pad pages (if appropriate) that are needed between */ - /* | the end of the vmlinux and the ram disk. */ - for (i=0; i<padPages; ++i) { - memset(inbuf, 0, 4096); - put4k(outputVmlinux, inbuf); - } - - /* Copy the ram disk (as full pages). */ - for ( i=0; i<ramPages; ++i ) { - get4k( ramDisk, inbuf ); - put4k( outputVmlinux, inbuf ); - } - - /* Close the input files */ - fclose(ramDisk); - fclose(inputVmlinux); - /* And flush the written output file */ - fflush(outputVmlinux); - - - - /* Fixup the new vmlinux to contain the ram disk starting offset (xRamDisk) and the ram disk size (xRamDiskSize) */ - /* fseek to the hvReleaseData pointer */ - fseek(outputVmlinux, ElfHeaderSize + 0x24, SEEK_SET); - if (fread(&hvReleaseData, 4, 1, outputVmlinux) != 1) { - death("Could not read hvReleaseData pointer\n", outputVmlinux, argv[4]); - } - hvReleaseData = ntohl(hvReleaseData); /* Convert to native int */ - printf("hvReleaseData is at %08x\n", hvReleaseData); - - /* fseek to the hvReleaseData */ - fseek(outputVmlinux, ElfHeaderSize + hvReleaseData, SEEK_SET); - if (fread(inbuf, 0x40, 1, outputVmlinux) != 1) { - death("Could not read hvReleaseData\n", outputVmlinux, argv[4]); - } - /* Check hvReleaseData sanity */ - if (memcmp(inbuf, &eyeCatcher, 4) != 0) { - death("hvReleaseData is invalid\n", outputVmlinux, argv[4]); - } - /* Get the naca pointer */ - naca = ntohl(*((u_int32_t*) &inbuf[0x0C])) - KERNELBASE; - printf("Naca is at offset 0x%lx \n", naca); - - /* fseek to the naca */ - fseek(outputVmlinux, ElfHeaderSize + naca, SEEK_SET); - if (fread(inbuf, 0x18, 1, outputVmlinux) != 1) { - death("Could not read naca\n", outputVmlinux, argv[4]); - } - xRamDisk = ntohl(*((u_int32_t *) &inbuf[0x0c])); - xRamDiskSize = ntohl(*((u_int32_t *) &inbuf[0x14])); - /* Make sure a RAM disk isn't already present */ - if ((xRamDisk != 0) || (xRamDiskSize != 0)) { - death("RAM disk is already attached to this kernel\n", outputVmlinux, argv[4]); - } - /* Fill in the values */ - *((u_int32_t *) &inbuf[0x0c]) = htonl(ramStartOffs); - *((u_int32_t *) &inbuf[0x14]) = htonl(ramPages); - - /* Write out the new naca */ - fflush(outputVmlinux); - fseek(outputVmlinux, ElfHeaderSize + naca, SEEK_SET); - if (fwrite(inbuf, 0x18, 1, outputVmlinux) != 1) { - death("Could not write naca\n", outputVmlinux, argv[4]); - } - printf("Ram Disk of 0x%lx pages is attached to the kernel at offset 0x%08x\n", - ramPages, ramStartOffs); - - /* Done */ - fclose(outputVmlinux); - /* Set permission to executable */ - chmod(argv[4], S_IRUSR|S_IWUSR|S_IXUSR|S_IRGRP|S_IXGRP|S_IROTH|S_IXOTH); - - return 0; -} - diff --git a/arch/ppc64/boot/addnote.c b/arch/ppc64/boot/addnote.c deleted file mode 100644 index 8041a9845ab7..000000000000 --- a/arch/ppc64/boot/addnote.c +++ /dev/null @@ -1,205 +0,0 @@ -/* - * Program to hack in a PT_NOTE program header entry in an ELF file. - * This is needed for OF on RS/6000s to load an image correctly. - * Note that OF needs a program header entry for the note, not an - * ELF section. - * - * Copyright 2000 Paul Mackerras. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - * Usage: addnote zImage - */ -#include <stdio.h> -#include <stdlib.h> -#include <fcntl.h> -#include <unistd.h> -#include <string.h> - -/* CHRP note section */ -char arch[] = "PowerPC"; - -#define N_DESCR 6 -unsigned int descr[N_DESCR] = { - 0xffffffff, /* real-mode = true */ - 0x00c00000, /* real-base, i.e. where we expect OF to be */ - 0xffffffff, /* real-size */ - 0xffffffff, /* virt-base */ - 0xffffffff, /* virt-size */ - 0x4000, /* load-base */ -}; - -/* RPA note section */ -char rpaname[] = "IBM,RPA-Client-Config"; - -/* - * Note: setting ignore_my_client_config *should* mean that OF ignores - * all the other fields, but there is a firmware bug which means that - * it looks at the splpar field at least. So these values need to be - * reasonable. - */ -#define N_RPA_DESCR 8 -unsigned int rpanote[N_RPA_DESCR] = { - 0, /* lparaffinity */ - 64, /* min_rmo_size */ - 0, /* min_rmo_percent */ - 40, /* max_pft_size */ - 1, /* splpar */ - -1, /* min_load */ - 0, /* new_mem_def */ - 1, /* ignore_my_client_config */ -}; - -#define ROUNDUP(len) (((len) + 3) & ~3) - -unsigned char buf[512]; - -#define GET_16BE(off) ((buf[off] << 8) + (buf[(off)+1])) -#define GET_32BE(off) ((GET_16BE(off) << 16) + GET_16BE((off)+2)) - -#define PUT_16BE(off, v) (buf[off] = ((v) >> 8) & 0xff, \ - buf[(off) + 1] = (v) & 0xff) -#define PUT_32BE(off, v) (PUT_16BE((off), (v) >> 16), \ - PUT_16BE((off) + 2, (v))) - -/* Structure of an ELF file */ -#define E_IDENT 0 /* ELF header */ -#define E_PHOFF 28 -#define E_PHENTSIZE 42 -#define E_PHNUM 44 -#define E_HSIZE 52 /* size of ELF header */ - -#define EI_MAGIC 0 /* offsets in E_IDENT area */ -#define EI_CLASS 4 -#define EI_DATA 5 - -#define PH_TYPE 0 /* ELF program header */ -#define PH_OFFSET 4 -#define PH_FILESZ 16 -#define PH_HSIZE 32 /* size of program header */ - -#define PT_NOTE 4 /* Program header type = note */ - -#define ELFCLASS32 1 -#define ELFDATA2MSB 2 - -unsigned char elf_magic[4] = { 0x7f, 'E', 'L', 'F' }; - -int -main(int ac, char **av) -{ - int fd, n, i; - int ph, ps, np; - int nnote, nnote2, ns; - - if (ac != 2) { - fprintf(stderr, "Usage: %s elf-file\n", av[0]); - exit(1); - } - fd = open(av[1], O_RDWR); - if (fd < 0) { - perror(av[1]); - exit(1); - } - - nnote = 12 + ROUNDUP(strlen(arch) + 1) + sizeof(descr); - nnote2 = 12 + ROUNDUP(strlen(rpaname) + 1) + sizeof(rpanote); - - n = read(fd, buf, sizeof(buf)); - if (n < 0) { - perror("read"); - exit(1); - } - - if (n < E_HSIZE || memcmp(&buf[E_IDENT+EI_MAGIC], elf_magic, 4) != 0) - goto notelf; - - if (buf[E_IDENT+EI_CLASS] != ELFCLASS32 - || buf[E_IDENT+EI_DATA] != ELFDATA2MSB) { - fprintf(stderr, "%s is not a big-endian 32-bit ELF image\n", - av[1]); - exit(1); - } - - ph = GET_32BE(E_PHOFF); - ps = GET_16BE(E_PHENTSIZE); - np = GET_16BE(E_PHNUM); - if (ph < E_HSIZE || ps < PH_HSIZE || np < 1) - goto notelf; - if (ph + (np + 2) * ps + nnote + nnote2 > n) - goto nospace; - - for (i = 0; i < np; ++i) { - if (GET_32BE(ph + PH_TYPE) == PT_NOTE) { - fprintf(stderr, "%s already has a note entry\n", - av[1]); - exit(0); - } - ph += ps; - } - - /* XXX check that the area we want to use is all zeroes */ - for (i = 0; i < 2 * ps + nnote + nnote2; ++i) - if (buf[ph + i] != 0) - goto nospace; - - /* fill in the program header entry */ - ns = ph + 2 * ps; - PUT_32BE(ph + PH_TYPE, PT_NOTE); - PUT_32BE(ph + PH_OFFSET, ns); - PUT_32BE(ph + PH_FILESZ, nnote); - - /* fill in the note area we point to */ - /* XXX we should probably make this a proper section */ - PUT_32BE(ns, strlen(arch) + 1); - PUT_32BE(ns + 4, N_DESCR * 4); - PUT_32BE(ns + 8, 0x1275); - strcpy((char *) &buf[ns + 12], arch); - ns += 12 + strlen(arch) + 1; - for (i = 0; i < N_DESCR; ++i, ns += 4) - PUT_32BE(ns, descr[i]); - - /* fill in the second program header entry and the RPA note area */ - ph += ps; - PUT_32BE(ph + PH_TYPE, PT_NOTE); - PUT_32BE(ph + PH_OFFSET, ns); - PUT_32BE(ph + PH_FILESZ, nnote2); - - /* fill in the note area we point to */ - PUT_32BE(ns, strlen(rpaname) + 1); - PUT_32BE(ns + 4, sizeof(rpanote)); - PUT_32BE(ns + 8, 0x12759999); - strcpy((char *) &buf[ns + 12], rpaname); - ns += 12 + ROUNDUP(strlen(rpaname) + 1); - for (i = 0; i < N_RPA_DESCR; ++i, ns += 4) - PUT_32BE(ns, rpanote[i]); - - /* Update the number of program headers */ - PUT_16BE(E_PHNUM, np + 2); - - /* write back */ - lseek(fd, (long) 0, SEEK_SET); - i = write(fd, buf, n); - if (i < 0) { - perror("write"); - exit(1); - } - if (i < n) { - fprintf(stderr, "%s: write truncated\n", av[1]); - exit(1); - } - - exit(0); - - notelf: - fprintf(stderr, "%s does not appear to be an ELF file\n", av[1]); - exit(1); - - nospace: - fprintf(stderr, "sorry, I can't find space in %s to put the note\n", - av[1]); - exit(1); -} diff --git a/arch/ppc64/boot/crt0.S b/arch/ppc64/boot/crt0.S deleted file mode 100644 index 9cc442263939..000000000000 --- a/arch/ppc64/boot/crt0.S +++ /dev/null @@ -1,59 +0,0 @@ -/* - * Copyright (C) Paul Mackerras 1997. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - * NOTE: this code runs in 32 bit mode and is packaged as ELF32. - */ - -#include "ppc_asm.h" - - .text - .globl _zimage_start -_zimage_start: - bl reloc_offset - -reloc_offset: - mflr r0 - lis r9,reloc_offset@ha - addi r9,r9,reloc_offset@l - subf. r0,r9,r0 - beq clear_caches - -reloc_got2: - lis r9,__got2_start@ha - addi r9,r9,__got2_start@l - lis r8,__got2_end@ha - addi r8,r8,__got2_end@l - subf. r8,r9,r8 - beq clear_caches - srwi. r8,r8,2 - mtctr r8 - add r9,r0,r9 -reloc_got2_loop: - lwz r8,0(r9) - add r8,r8,r0 - stw r8,0(r9) - addi r9,r9,4 - bdnz reloc_got2_loop - -clear_caches: - lis r9,_start@h - add r9,r0,r9 - lis r8,_etext@ha - addi r8,r8,_etext@l - add r8,r0,r8 -1: dcbf r0,r9 - icbi r0,r9 - addi r9,r9,0x20 - cmplwi 0,r9,8 - blt 1b - sync - isync - - mr r6,r1 - b start - diff --git a/arch/ppc64/boot/div64.S b/arch/ppc64/boot/div64.S deleted file mode 100644 index 722f360a32a9..000000000000 --- a/arch/ppc64/boot/div64.S +++ /dev/null @@ -1,58 +0,0 @@ -/* - * Divide a 64-bit unsigned number by a 32-bit unsigned number. - * This routine assumes that the top 32 bits of the dividend are - * non-zero to start with. - * On entry, r3 points to the dividend, which get overwritten with - * the 64-bit quotient, and r4 contains the divisor. - * On exit, r3 contains the remainder. - * - * Copyright (C) 2002 Paul Mackerras, IBM Corp. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#include "ppc_asm.h" - - .globl __div64_32 -__div64_32: - lwz r5,0(r3) # get the dividend into r5/r6 - lwz r6,4(r3) - cmplw r5,r4 - li r7,0 - li r8,0 - blt 1f - divwu r7,r5,r4 # if dividend.hi >= divisor, - mullw r0,r7,r4 # quotient.hi = dividend.hi / divisor - subf. r5,r0,r5 # dividend.hi %= divisor - beq 3f -1: mr r11,r5 # here dividend.hi != 0 - andis. r0,r5,0xc000 - bne 2f - cntlzw r0,r5 # we are shifting the dividend right - li r10,-1 # to make it < 2^32, and shifting - srw r10,r10,r0 # the divisor right the same amount, - add r9,r4,r10 # rounding up (so the estimate cannot - andc r11,r6,r10 # ever be too large, only too small) - andc r9,r9,r10 - or r11,r5,r11 - rotlw r9,r9,r0 - rotlw r11,r11,r0 - divwu r11,r11,r9 # then we divide the shifted quantities -2: mullw r10,r11,r4 # to get an estimate of the quotient, - mulhwu r9,r11,r4 # multiply the estimate by the divisor, - subfc r6,r10,r6 # take the product from the divisor, - add r8,r8,r11 # and add the estimate to the accumulated - subfe. r5,r9,r5 # quotient - bne 1b -3: cmplw r6,r4 - blt 4f - divwu r0,r6,r4 # perform the remaining 32-bit division - mullw r10,r0,r4 # and get the remainder - add r8,r8,r0 - subf r6,r10,r6 -4: stw r7,0(r3) # return the quotient in *r3 - stw r8,4(r3) - mr r3,r6 # return the remainder in r3 - blr diff --git a/arch/ppc64/boot/elf.h b/arch/ppc64/boot/elf.h deleted file mode 100644 index d4828fcf1cb9..000000000000 --- a/arch/ppc64/boot/elf.h +++ /dev/null @@ -1,149 +0,0 @@ -#ifndef _PPC_BOOT_ELF_H_ -#define _PPC_BOOT_ELF_H_ - -/* 32-bit ELF base types. */ -typedef unsigned int Elf32_Addr; -typedef unsigned short Elf32_Half; -typedef unsigned int Elf32_Off; -typedef signed int Elf32_Sword; -typedef unsigned int Elf32_Word; - -/* 64-bit ELF base types. */ -typedef unsigned long long Elf64_Addr; -typedef unsigned short Elf64_Half; -typedef signed short Elf64_SHalf; -typedef unsigned long long Elf64_Off; -typedef signed int Elf64_Sword; -typedef unsigned int Elf64_Word; -typedef unsigned long long Elf64_Xword; -typedef signed long long Elf64_Sxword; - -/* These constants are for the segment types stored in the image headers */ -#define PT_NULL 0 -#define PT_LOAD 1 -#define PT_DYNAMIC 2 -#define PT_INTERP 3 -#define PT_NOTE 4 -#define PT_SHLIB 5 -#define PT_PHDR 6 -#define PT_TLS 7 /* Thread local storage segment */ -#define PT_LOOS 0x60000000 /* OS-specific */ -#define PT_HIOS 0x6fffffff /* OS-specific */ -#define PT_LOPROC 0x70000000 -#define PT_HIPROC 0x7fffffff -#define PT_GNU_EH_FRAME 0x6474e550 - -#define PT_GNU_STACK (PT_LOOS + 0x474e551) - -/* These constants define the different elf file types */ -#define ET_NONE 0 -#define ET_REL 1 -#define ET_EXEC 2 -#define ET_DYN 3 -#define ET_CORE 4 -#define ET_LOPROC 0xff00 -#define ET_HIPROC 0xffff - -/* These constants define the various ELF target machines */ -#define EM_NONE 0 -#define EM_PPC 20 /* PowerPC */ -#define EM_PPC64 21 /* PowerPC64 */ - -#define EI_NIDENT 16 - -typedef struct elf32_hdr { - unsigned char e_ident[EI_NIDENT]; - Elf32_Half e_type; - Elf32_Half e_machine; - Elf32_Word e_version; - Elf32_Addr e_entry; /* Entry point */ - Elf32_Off e_phoff; - Elf32_Off e_shoff; - Elf32_Word e_flags; - Elf32_Half e_ehsize; - Elf32_Half e_phentsize; - Elf32_Half e_phnum; - Elf32_Half e_shentsize; - Elf32_Half e_shnum; - Elf32_Half e_shstrndx; -} Elf32_Ehdr; - -typedef struct elf64_hdr { - unsigned char e_ident[16]; /* ELF "magic number" */ - Elf64_Half e_type; - Elf64_Half e_machine; - Elf64_Word e_version; - Elf64_Addr e_entry; /* Entry point virtual address */ - Elf64_Off e_phoff; /* Program header table file offset */ - Elf64_Off e_shoff; /* Section header table file offset */ - Elf64_Word e_flags; - Elf64_Half e_ehsize; - Elf64_Half e_phentsize; - Elf64_Half e_phnum; - Elf64_Half e_shentsize; - Elf64_Half e_shnum; - Elf64_Half e_shstrndx; -} Elf64_Ehdr; - -/* These constants define the permissions on sections in the program - header, p_flags. */ -#define PF_R 0x4 -#define PF_W 0x2 -#define PF_X 0x1 - -typedef struct elf32_phdr { - Elf32_Word p_type; - Elf32_Off p_offset; - Elf32_Addr p_vaddr; - Elf32_Addr p_paddr; - Elf32_Word p_filesz; - Elf32_Word p_memsz; - Elf32_Word p_flags; - Elf32_Word p_align; -} Elf32_Phdr; - -typedef struct elf64_phdr { - Elf64_Word p_type; - Elf64_Word p_flags; - Elf64_Off p_offset; /* Segment file offset */ - Elf64_Addr p_vaddr; /* Segment virtual address */ - Elf64_Addr p_paddr; /* Segment physical address */ - Elf64_Xword p_filesz; /* Segment size in file */ - Elf64_Xword p_memsz; /* Segment size in memory */ - Elf64_Xword p_align; /* Segment alignment, file & memory */ -} Elf64_Phdr; - -#define EI_MAG0 0 /* e_ident[] indexes */ -#define EI_MAG1 1 -#define EI_MAG2 2 -#define EI_MAG3 3 -#define EI_CLASS 4 -#define EI_DATA 5 -#define EI_VERSION 6 -#define EI_OSABI 7 -#define EI_PAD 8 - -#define ELFMAG0 0x7f /* EI_MAG */ -#define ELFMAG1 'E' -#define ELFMAG2 'L' -#define ELFMAG3 'F' -#define ELFMAG "\177ELF" -#define SELFMAG 4 - -#define ELFCLASSNONE 0 /* EI_CLASS */ -#define ELFCLASS32 1 -#define ELFCLASS64 2 -#define ELFCLASSNUM 3 - -#define ELFDATANONE 0 /* e_ident[EI_DATA] */ -#define ELFDATA2LSB 1 -#define ELFDATA2MSB 2 - -#define EV_NONE 0 /* e_version, EI_VERSION */ -#define EV_CURRENT 1 -#define EV_NUM 2 - -#define ELFOSABI_NONE 0 -#define ELFOSABI_LINUX 3 - -#endif /* _PPC_BOOT_ELF_H_ */ diff --git a/arch/ppc64/boot/install.sh b/arch/ppc64/boot/install.sh deleted file mode 100644 index eacce9590816..000000000000 --- a/arch/ppc64/boot/install.sh +++ /dev/null @@ -1,42 +0,0 @@ -#!/bin/sh -# -# arch/ppc64/boot/install.sh -# -# This file is subject to the terms and conditions of the GNU General Public -# License. See the file "COPYING" in the main directory of this archive -# for more details. -# -# Copyright (C) 1995 by Linus Torvalds -# -# Blatantly stolen from in arch/i386/boot/install.sh by Dave Hansen -# -# "make install" script for ppc64 architecture -# -# Arguments: -# $1 - kernel version -# $2 - kernel image file -# $3 - kernel map file -# $4 - default install path (blank if root directory) -# $5 - kernel boot file, the zImage -# - -# User may have a custom install script - -if [ -x ~/bin/${CROSS_COMPILE}installkernel ]; then exec ~/bin/${CROSS_COMPILE}installkernel "$@"; fi -if [ -x /sbin/${CROSS_COMPILE}installkernel ]; then exec /sbin/${CROSS_COMPILE}installkernel "$@"; fi - -# Default install - -# this should work for both the pSeries zImage and the iSeries vmlinux.sm -image_name=`basename $2` - -if [ -f $4/$image_name ]; then - mv $4/$image_name $4/$image_name.old -fi - -if [ -f $4/System.map ]; then - mv $4/System.map $4/System.old -fi - -cat $2 > $4/$image_name -cp $3 $4/System.map diff --git a/arch/ppc64/boot/main.c b/arch/ppc64/boot/main.c deleted file mode 100644 index c1dc876bccab..000000000000 --- a/arch/ppc64/boot/main.c +++ /dev/null @@ -1,274 +0,0 @@ -/* - * Copyright (C) Paul Mackerras 1997. - * - * Updates for PPC64 by Todd Inglett, Dave Engebretsen & Peter Bergner. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#include <stdarg.h> -#include <stddef.h> -#include "elf.h" -#include "page.h" -#include "string.h" -#include "stdio.h" -#include "prom.h" -#include "zlib.h" - -extern void flush_cache(void *, unsigned long); - - -/* Value picked to match that used by yaboot */ -#define PROG_START 0x01400000 -#define RAM_END (512<<20) // Fixme: use OF */ -#define ONE_MB 0x100000 - -extern char _start[]; -extern char __bss_start[]; -extern char _end[]; -extern char _vmlinux_start[]; -extern char _vmlinux_end[]; -extern char _initrd_start[]; -extern char _initrd_end[]; - -struct addr_range { - unsigned long addr; - unsigned long size; - unsigned long memsize; -}; -static struct addr_range vmlinux; -static struct addr_range vmlinuz; -static struct addr_range initrd; - -static char scratch[46912]; /* scratch space for gunzip, from zlib_inflate_workspacesize() */ -static char elfheader[256]; - - -typedef void (*kernel_entry_t)( unsigned long, - unsigned long, - void *, - void *); - - -#undef DEBUG - -static unsigned long claim_base; - -#define HEAD_CRC 2 -#define EXTRA_FIELD 4 -#define ORIG_NAME 8 -#define COMMENT 0x10 -#define RESERVED 0xe0 - -static void gunzip(void *dst, int dstlen, unsigned char *src, int *lenp) -{ - z_stream s; - int r, i, flags; - - /* skip header */ - i = 10; - flags = src[3]; - if (src[2] != Z_DEFLATED || (flags & RESERVED) != 0) { - printf("bad gzipped data\n\r"); - exit(); - } - if ((flags & EXTRA_FIELD) != 0) - i = 12 + src[10] + (src[11] << 8); - if ((flags & ORIG_NAME) != 0) - while (src[i++] != 0) - ; - if ((flags & COMMENT) != 0) - while (src[i++] != 0) - ; - if ((flags & HEAD_CRC) != 0) - i += 2; - if (i >= *lenp) { - printf("gunzip: ran out of data in header\n\r"); - exit(); - } - - if (zlib_inflate_workspacesize() > sizeof(scratch)) { - printf("gunzip needs more mem\n"); - exit(); - } - memset(&s, 0, sizeof(s)); - s.workspace = scratch; - r = zlib_inflateInit2(&s, -MAX_WBITS); - if (r != Z_OK) { - printf("inflateInit2 returned %d\n\r", r); - exit(); - } - s.next_in = src + i; - s.avail_in = *lenp - i; - s.next_out = dst; - s.avail_out = dstlen; - r = zlib_inflate(&s, Z_FULL_FLUSH); - if (r != Z_OK && r != Z_STREAM_END) { - printf("inflate returned %d msg: %s\n\r", r, s.msg); - exit(); - } - *lenp = s.next_out - (unsigned char *) dst; - zlib_inflateEnd(&s); -} - -static unsigned long try_claim(unsigned long size) -{ - unsigned long addr = 0; - - for(; claim_base < RAM_END; claim_base += ONE_MB) { -#ifdef DEBUG - printf(" trying: 0x%08lx\n\r", claim_base); -#endif - addr = (unsigned long)claim(claim_base, size, 0); - if ((void *)addr != (void *)-1) - break; - } - if (addr == 0) - return 0; - claim_base = PAGE_ALIGN(claim_base + size); - return addr; -} - -void start(unsigned long a1, unsigned long a2, void *promptr, void *sp) -{ - unsigned long i; - int len; - kernel_entry_t kernel_entry; - Elf64_Ehdr *elf64; - Elf64_Phdr *elf64ph; - - memset(__bss_start, 0, _end - __bss_start); - - prom = (int (*)(void *)) promptr; - chosen_handle = finddevice("/chosen"); - if (chosen_handle == (void *) -1) - exit(); - if (getprop(chosen_handle, "stdout", &stdout, sizeof(stdout)) != 4) - exit(); - stderr = stdout; - if (getprop(chosen_handle, "stdin", &stdin, sizeof(stdin)) != 4) - exit(); - - printf("\n\rzImage starting: loaded at 0x%p (sp: 0x%p)\n\r", _start, sp); - - /* - * The first available claim_base must be above the end of the - * the loaded kernel wrapper file (_start to _end includes the - * initrd image if it is present) and rounded up to a nice - * 1 MB boundary for good measure. - */ - - claim_base = _ALIGN_UP((unsigned long)_end, ONE_MB); - -#if defined(PROG_START) - /* - * Maintain a "magic" minimum address. This keeps some older - * firmware platforms running. - */ - - if (claim_base < PROG_START) - claim_base = PROG_START; -#endif - - vmlinuz.addr = (unsigned long)_vmlinux_start; - vmlinuz.size = (unsigned long)(_vmlinux_end - _vmlinux_start); - - /* gunzip the ELF header of the kernel */ - if (*(unsigned short *)vmlinuz.addr == 0x1f8b) { - len = vmlinuz.size; - gunzip(elfheader, sizeof(elfheader), - (unsigned char *)vmlinuz.addr, &len); - } else - memcpy(elfheader, (const void *)vmlinuz.addr, sizeof(elfheader)); - - elf64 = (Elf64_Ehdr *)elfheader; - if ( elf64->e_ident[EI_MAG0] != ELFMAG0 || - elf64->e_ident[EI_MAG1] != ELFMAG1 || - elf64->e_ident[EI_MAG2] != ELFMAG2 || - elf64->e_ident[EI_MAG3] != ELFMAG3 || - elf64->e_ident[EI_CLASS] != ELFCLASS64 || - elf64->e_ident[EI_DATA] != ELFDATA2MSB || - elf64->e_type != ET_EXEC || - elf64->e_machine != EM_PPC64 ) - { - printf("Error: not a valid PPC64 ELF file!\n\r"); - exit(); - } - - elf64ph = (Elf64_Phdr *)((unsigned long)elf64 + - (unsigned long)elf64->e_phoff); - for(i=0; i < (unsigned int)elf64->e_phnum ;i++,elf64ph++) { - if (elf64ph->p_type == PT_LOAD && elf64ph->p_offset != 0) - break; - } - vmlinux.size = (unsigned long)elf64ph->p_filesz; - vmlinux.memsize = (unsigned long)elf64ph->p_memsz; - printf("Allocating 0x%lx bytes for kernel ...\n\r", vmlinux.memsize); - vmlinux.addr = try_claim(vmlinux.memsize); - if (vmlinux.addr == 0) { - printf("Can't allocate memory for kernel image !\n\r"); - exit(); - } - - /* - * Now we try to claim memory for the initrd (and copy it there) - */ - initrd.size = (unsigned long)(_initrd_end - _initrd_start); - initrd.memsize = initrd.size; - if ( initrd.size > 0 ) { - printf("Allocating 0x%lx bytes for initrd ...\n\r", initrd.size); - initrd.addr = try_claim(initrd.size); - if (initrd.addr == 0) { - printf("Can't allocate memory for initial ramdisk !\n\r"); - exit(); - } - a1 = initrd.addr; - a2 = initrd.size; - printf("initial ramdisk moving 0x%lx <- 0x%lx (0x%lx bytes)\n\r", - initrd.addr, (unsigned long)_initrd_start, initrd.size); - memmove((void *)initrd.addr, (void *)_initrd_start, initrd.size); - printf("initrd head: 0x%lx\n\r", *((unsigned long *)initrd.addr)); - } - - /* Eventually gunzip the kernel */ - if (*(unsigned short *)vmlinuz.addr == 0x1f8b) { - printf("gunzipping (0x%lx <- 0x%lx:0x%0lx)...", - vmlinux.addr, vmlinuz.addr, vmlinuz.addr+vmlinuz.size); - len = vmlinuz.size; - gunzip((void *)vmlinux.addr, vmlinux.memsize, - (unsigned char *)vmlinuz.addr, &len); - printf("done 0x%lx bytes\n\r", len); - } else { - memmove((void *)vmlinux.addr,(void *)vmlinuz.addr,vmlinuz.size); - } - - /* Skip over the ELF header */ -#ifdef DEBUG - printf("... skipping 0x%lx bytes of ELF header\n\r", - (unsigned long)elf64ph->p_offset); -#endif - vmlinux.addr += (unsigned long)elf64ph->p_offset; - - flush_cache((void *)vmlinux.addr, vmlinux.size); - - kernel_entry = (kernel_entry_t)vmlinux.addr; -#ifdef DEBUG - printf( "kernel:\n\r" - " entry addr = 0x%lx\n\r" - " a1 = 0x%lx,\n\r" - " a2 = 0x%lx,\n\r" - " prom = 0x%lx,\n\r" - " bi_recs = 0x%lx,\n\r", - (unsigned long)kernel_entry, a1, a2, - (unsigned long)prom, NULL); -#endif - - kernel_entry( a1, a2, prom, NULL ); - - printf("Error: Linux kernel returned to zImage bootloader!\n\r"); - - exit(); -} - diff --git a/arch/ppc64/boot/page.h b/arch/ppc64/boot/page.h deleted file mode 100644 index 14eca30fef64..000000000000 --- a/arch/ppc64/boot/page.h +++ /dev/null @@ -1,34 +0,0 @@ -#ifndef _PPC_BOOT_PAGE_H -#define _PPC_BOOT_PAGE_H -/* - * Copyright (C) 2001 PPC64 Team, IBM Corp - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifdef __ASSEMBLY__ -#define ASM_CONST(x) x -#else -#define __ASM_CONST(x) x##UL -#define ASM_CONST(x) __ASM_CONST(x) -#endif - -/* PAGE_SHIFT determines the page size */ -#define PAGE_SHIFT 12 -#define PAGE_SIZE (ASM_CONST(1) << PAGE_SHIFT) -#define PAGE_MASK (~(PAGE_SIZE-1)) - -/* align addr on a size boundary - adjust address up/down if needed */ -#define _ALIGN_UP(addr,size) (((addr)+((size)-1))&(~((size)-1))) -#define _ALIGN_DOWN(addr,size) ((addr)&(~((size)-1))) - -/* align addr on a size boundary - adjust address up if needed */ -#define _ALIGN(addr,size) _ALIGN_UP(addr,size) - -/* to align the pointer to the (next) page boundary */ -#define PAGE_ALIGN(addr) _ALIGN(addr, PAGE_SIZE) - -#endif /* _PPC_BOOT_PAGE_H */ diff --git a/arch/ppc64/boot/ppc_asm.h b/arch/ppc64/boot/ppc_asm.h deleted file mode 100644 index 1c2c2817f9b7..000000000000 --- a/arch/ppc64/boot/ppc_asm.h +++ /dev/null @@ -1,62 +0,0 @@ -#ifndef _PPC64_PPC_ASM_H -#define _PPC64_PPC_ASM_H -/* - * - * Definitions used by various bits of low-level assembly code on PowerPC. - * - * Copyright (C) 1995-1999 Gary Thomas, Paul Mackerras, Cort Dougan. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -/* Condition Register Bit Fields */ - -#define cr0 0 -#define cr1 1 -#define cr2 2 -#define cr3 3 -#define cr4 4 -#define cr5 5 -#define cr6 6 -#define cr7 7 - - -/* General Purpose Registers (GPRs) */ - -#define r0 0 -#define r1 1 -#define r2 2 -#define r3 3 -#define r4 4 -#define r5 5 -#define r6 6 -#define r7 7 -#define r8 8 -#define r9 9 -#define r10 10 -#define r11 11 -#define r12 12 -#define r13 13 -#define r14 14 -#define r15 15 -#define r16 16 -#define r17 17 -#define r18 18 -#define r19 19 -#define r20 20 -#define r21 21 -#define r22 22 -#define r23 23 -#define r24 24 -#define r25 25 -#define r26 26 -#define r27 27 -#define r28 28 -#define r29 29 -#define r30 30 -#define r31 31 - -#endif /* _PPC64_PPC_ASM_H */ diff --git a/arch/ppc64/boot/prom.c b/arch/ppc64/boot/prom.c deleted file mode 100644 index 4bea2f4dcb06..000000000000 --- a/arch/ppc64/boot/prom.c +++ /dev/null @@ -1,499 +0,0 @@ -/* - * Copyright (C) Paul Mackerras 1997. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#include <stdarg.h> -#include <stddef.h> -#include "string.h" -#include "stdio.h" -#include "prom.h" - -int (*prom)(void *); - -void *chosen_handle; - -void *stdin; -void *stdout; -void *stderr; - - -int -write(void *handle, void *ptr, int nb) -{ - struct prom_args { - char *service; - int nargs; - int nret; - void *ihandle; - void *addr; - int len; - int actual; - } args; - - args.service = "write"; - args.nargs = 3; - args.nret = 1; - args.ihandle = handle; - args.addr = ptr; - args.len = nb; - args.actual = -1; - (*prom)(&args); - return args.actual; -} - -int -read(void *handle, void *ptr, int nb) -{ - struct prom_args { - char *service; - int nargs; - int nret; - void *ihandle; - void *addr; - int len; - int actual; - } args; - - args.service = "read"; - args.nargs = 3; - args.nret = 1; - args.ihandle = handle; - args.addr = ptr; - args.len = nb; - args.actual = -1; - (*prom)(&args); - return args.actual; -} - -void -exit() -{ - struct prom_args { - char *service; - } args; - - for (;;) { - args.service = "exit"; - (*prom)(&args); - } -} - -void -pause(void) -{ - struct prom_args { - char *service; - } args; - - args.service = "enter"; - (*prom)(&args); -} - -void * -finddevice(const char *name) -{ - struct prom_args { - char *service; - int nargs; - int nret; - const char *devspec; - void *phandle; - } args; - - args.service = "finddevice"; - args.nargs = 1; - args.nret = 1; - args.devspec = name; - args.phandle = (void *) -1; - (*prom)(&args); - return args.phandle; -} - -void * -claim(unsigned long virt, unsigned long size, unsigned long align) -{ - struct prom_args { - char *service; - int nargs; - int nret; - unsigned int virt; - unsigned int size; - unsigned int align; - void *ret; - } args; - - args.service = "claim"; - args.nargs = 3; - args.nret = 1; - args.virt = virt; - args.size = size; - args.align = align; - (*prom)(&args); - return args.ret; -} - -int -getprop(void *phandle, const char *name, void *buf, int buflen) -{ - struct prom_args { - char *service; - int nargs; - int nret; - void *phandle; - const char *name; - void *buf; - int buflen; - int size; - } args; - - args.service = "getprop"; - args.nargs = 4; - args.nret = 1; - args.phandle = phandle; - args.name = name; - args.buf = buf; - args.buflen = buflen; - args.size = -1; - (*prom)(&args); - return args.size; -} - -int -putc(int c, void *f) -{ - char ch = c; - - if (c == '\n') - putc('\r', f); - return write(f, &ch, 1) == 1? c: -1; -} - -int -putchar(int c) -{ - return putc(c, stdout); -} - -int -fputs(char *str, void *f) -{ - int n = strlen(str); - - return write(f, str, n) == n? 0: -1; -} - -size_t strnlen(const char * s, size_t count) -{ - const char *sc; - - for (sc = s; count-- && *sc != '\0'; ++sc) - /* nothing */; - return sc - s; -} - -extern unsigned int __div64_32(unsigned long long *dividend, - unsigned int divisor); - -/* The unnecessary pointer compare is there - * to check for type safety (n must be 64bit) - */ -# define do_div(n,base) ({ \ - unsigned int __base = (base); \ - unsigned int __rem; \ - (void)(((typeof((n)) *)0) == ((unsigned long long *)0)); \ - if (((n) >> 32) == 0) { \ - __rem = (unsigned int)(n) % __base; \ - (n) = (unsigned int)(n) / __base; \ - } else \ - __rem = __div64_32(&(n), __base); \ - __rem; \ - }) - -static int skip_atoi(const char **s) -{ - int i, c; - - for (i = 0; '0' <= (c = **s) && c <= '9'; ++*s) - i = i*10 + c - '0'; - return i; -} - -#define ZEROPAD 1 /* pad with zero */ -#define SIGN 2 /* unsigned/signed long */ -#define PLUS 4 /* show plus */ -#define SPACE 8 /* space if plus */ -#define LEFT 16 /* left justified */ -#define SPECIAL 32 /* 0x */ -#define LARGE 64 /* use 'ABCDEF' instead of 'abcdef' */ - -static char * number(char * str, unsigned long long num, int base, int size, int precision, int type) -{ - char c,sign,tmp[66]; - const char *digits="0123456789abcdefghijklmnopqrstuvwxyz"; - int i; - - if (type & LARGE) - digits = "0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ"; - if (type & LEFT) - type &= ~ZEROPAD; - if (base < 2 || base > 36) - return 0; - c = (type & ZEROPAD) ? '0' : ' '; - sign = 0; - if (type & SIGN) { - if ((signed long long)num < 0) { - sign = '-'; - num = - (signed long long)num; - size--; - } else if (type & PLUS) { - sign = '+'; - size--; - } else if (type & SPACE) { - sign = ' '; - size--; - } - } - if (type & SPECIAL) { - if (base == 16) - size -= 2; - else if (base == 8) - size--; - } - i = 0; - if (num == 0) - tmp[i++]='0'; - else while (num != 0) { - tmp[i++] = digits[do_div(num, base)]; - } - if (i > precision) - precision = i; - size -= precision; - if (!(type&(ZEROPAD+LEFT))) - while(size-->0) - *str++ = ' '; - if (sign) - *str++ = sign; - if (type & SPECIAL) { - if (base==8) - *str++ = '0'; - else if (base==16) { - *str++ = '0'; - *str++ = digits[33]; - } - } - if (!(type & LEFT)) - while (size-- > 0) - *str++ = c; - while (i < precision--) - *str++ = '0'; - while (i-- > 0) - *str++ = tmp[i]; - while (size-- > 0) - *str++ = ' '; - return str; -} - -int vsprintf(char *buf, const char *fmt, va_list args) -{ - int len; - unsigned long long num; - int i, base; - char * str; - const char *s; - - int flags; /* flags to number() */ - - int field_width; /* width of output field */ - int precision; /* min. # of digits for integers; max - number of chars for from string */ - int qualifier; /* 'h', 'l', or 'L' for integer fields */ - /* 'z' support added 23/7/1999 S.H. */ - /* 'z' changed to 'Z' --davidm 1/25/99 */ - - - for (str=buf ; *fmt ; ++fmt) { - if (*fmt != '%') { - *str++ = *fmt; - continue; - } - - /* process flags */ - flags = 0; - repeat: - ++fmt; /* this also skips first '%' */ - switch (*fmt) { - case '-': flags |= LEFT; goto repeat; - case '+': flags |= PLUS; goto repeat; - case ' ': flags |= SPACE; goto repeat; - case '#': flags |= SPECIAL; goto repeat; - case '0': flags |= ZEROPAD; goto repeat; - } - - /* get field width */ - field_width = -1; - if ('0' <= *fmt && *fmt <= '9') - field_width = skip_atoi(&fmt); - else if (*fmt == '*') { - ++fmt; - /* it's the next argument */ - field_width = va_arg(args, int); - if (field_width < 0) { - field_width = -field_width; - flags |= LEFT; - } - } - - /* get the precision */ - precision = -1; - if (*fmt == '.') { - ++fmt; - if ('0' <= *fmt && *fmt <= '9') - precision = skip_atoi(&fmt); - else if (*fmt == '*') { - ++fmt; - /* it's the next argument */ - precision = va_arg(args, int); - } - if (precision < 0) - precision = 0; - } - - /* get the conversion qualifier */ - qualifier = -1; - if (*fmt == 'h' || *fmt == 'l' || *fmt == 'L' || *fmt =='Z') { - qualifier = *fmt; - ++fmt; - } - - /* default base */ - base = 10; - - switch (*fmt) { - case 'c': - if (!(flags & LEFT)) - while (--field_width > 0) - *str++ = ' '; - *str++ = (unsigned char) va_arg(args, int); - while (--field_width > 0) - *str++ = ' '; - continue; - - case 's': - s = va_arg(args, char *); - if (!s) - s = "<NULL>"; - - len = strnlen(s, precision); - - if (!(flags & LEFT)) - while (len < field_width--) - *str++ = ' '; - for (i = 0; i < len; ++i) - *str++ = *s++; - while (len < field_width--) - *str++ = ' '; - continue; - - case 'p': - if (field_width == -1) { - field_width = 2*sizeof(void *); - flags |= ZEROPAD; - } - str = number(str, - (unsigned long) va_arg(args, void *), 16, - field_width, precision, flags); - continue; - - - case 'n': - if (qualifier == 'l') { - long * ip = va_arg(args, long *); - *ip = (str - buf); - } else if (qualifier == 'Z') { - size_t * ip = va_arg(args, size_t *); - *ip = (str - buf); - } else { - int * ip = va_arg(args, int *); - *ip = (str - buf); - } - continue; - - case '%': - *str++ = '%'; - continue; - - /* integer number formats - set up the flags and "break" */ - case 'o': - base = 8; - break; - - case 'X': - flags |= LARGE; - case 'x': - base = 16; - break; - - case 'd': - case 'i': - flags |= SIGN; - case 'u': - break; - - default: - *str++ = '%'; - if (*fmt) - *str++ = *fmt; - else - --fmt; - continue; - } - if (qualifier == 'l') { - num = va_arg(args, unsigned long); - if (flags & SIGN) - num = (signed long) num; - } else if (qualifier == 'Z') { - num = va_arg(args, size_t); - } else if (qualifier == 'h') { - num = (unsigned short) va_arg(args, int); - if (flags & SIGN) - num = (signed short) num; - } else { - num = va_arg(args, unsigned int); - if (flags & SIGN) - num = (signed int) num; - } - str = number(str, num, base, field_width, precision, flags); - } - *str = '\0'; - return str-buf; -} - -int sprintf(char * buf, const char *fmt, ...) -{ - va_list args; - int i; - - va_start(args, fmt); - i=vsprintf(buf,fmt,args); - va_end(args); - return i; -} - -static char sprint_buf[1024]; - -int -printf(const char *fmt, ...) -{ - va_list args; - int n; - - va_start(args, fmt); - n = vsprintf(sprint_buf, fmt, args); - va_end(args); - write(stdout, sprint_buf, n); - return n; -} diff --git a/arch/ppc64/boot/prom.h b/arch/ppc64/boot/prom.h deleted file mode 100644 index 96ab5aec740c..000000000000 --- a/arch/ppc64/boot/prom.h +++ /dev/null @@ -1,18 +0,0 @@ -#ifndef _PPC_BOOT_PROM_H_ -#define _PPC_BOOT_PROM_H_ - -extern int (*prom) (void *); -extern void *chosen_handle; - -extern void *stdin; -extern void *stdout; -extern void *stderr; - -extern int write(void *handle, void *ptr, int nb); -extern int read(void *handle, void *ptr, int nb); -extern void exit(void); -extern void pause(void); -extern void *finddevice(const char *); -extern void *claim(unsigned long virt, unsigned long size, unsigned long align); -extern int getprop(void *phandle, const char *name, void *buf, int buflen); -#endif /* _PPC_BOOT_PROM_H_ */ diff --git a/arch/ppc64/boot/stdio.h b/arch/ppc64/boot/stdio.h deleted file mode 100644 index 24bd3a8dee94..000000000000 --- a/arch/ppc64/boot/stdio.h +++ /dev/null @@ -1,16 +0,0 @@ -#ifndef _PPC_BOOT_STDIO_H_ -#define _PPC_BOOT_STDIO_H_ - -extern int printf(const char *fmt, ...); - -extern int sprintf(char *buf, const char *fmt, ...); - -extern int vsprintf(char *buf, const char *fmt, va_list args); - -extern int putc(int c, void *f); -extern int putchar(int c); -extern int getchar(void); - -extern int fputs(char *str, void *f); - -#endif /* _PPC_BOOT_STDIO_H_ */ diff --git a/arch/ppc64/boot/string.S b/arch/ppc64/boot/string.S deleted file mode 100644 index b1eeaed7db17..000000000000 --- a/arch/ppc64/boot/string.S +++ /dev/null @@ -1,216 +0,0 @@ -/* - * Copyright (C) Paul Mackerras 1997. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - * NOTE: this code runs in 32 bit mode and is packaged as ELF32. - */ - -#include "ppc_asm.h" - - .text - .globl strcpy -strcpy: - addi r5,r3,-1 - addi r4,r4,-1 -1: lbzu r0,1(r4) - cmpwi 0,r0,0 - stbu r0,1(r5) - bne 1b - blr - - .globl strncpy -strncpy: - cmpwi 0,r5,0 - beqlr - mtctr r5 - addi r6,r3,-1 - addi r4,r4,-1 -1: lbzu r0,1(r4) - cmpwi 0,r0,0 - stbu r0,1(r6) - bdnzf 2,1b /* dec ctr, branch if ctr != 0 && !cr0.eq */ - blr - - .globl strcat -strcat: - addi r5,r3,-1 - addi r4,r4,-1 -1: lbzu r0,1(r5) - cmpwi 0,r0,0 - bne 1b - addi r5,r5,-1 -1: lbzu r0,1(r4) - cmpwi 0,r0,0 - stbu r0,1(r5) - bne 1b - blr - - .globl strcmp -strcmp: - addi r5,r3,-1 - addi r4,r4,-1 -1: lbzu r3,1(r5) - cmpwi 1,r3,0 - lbzu r0,1(r4) - subf. r3,r0,r3 - beqlr 1 - beq 1b - blr - - .globl strlen -strlen: - addi r4,r3,-1 -1: lbzu r0,1(r4) - cmpwi 0,r0,0 - bne 1b - subf r3,r3,r4 - blr - - .globl memset -memset: - rlwimi r4,r4,8,16,23 - rlwimi r4,r4,16,0,15 - addi r6,r3,-4 - cmplwi 0,r5,4 - blt 7f - stwu r4,4(r6) - beqlr - andi. r0,r6,3 - add r5,r0,r5 - subf r6,r0,r6 - rlwinm r0,r5,32-2,2,31 - mtctr r0 - bdz 6f -1: stwu r4,4(r6) - bdnz 1b -6: andi. r5,r5,3 -7: cmpwi 0,r5,0 - beqlr - mtctr r5 - addi r6,r6,3 -8: stbu r4,1(r6) - bdnz 8b - blr - - .globl memmove -memmove: - cmplw 0,r3,r4 - bgt backwards_memcpy - /* fall through */ - - .globl memcpy -memcpy: - rlwinm. r7,r5,32-3,3,31 /* r7 = r5 >> 3 */ - addi r6,r3,-4 - addi r4,r4,-4 - beq 2f /* if less than 8 bytes to do */ - andi. r0,r6,3 /* get dest word aligned */ - mtctr r7 - bne 5f -1: lwz r7,4(r4) - lwzu r8,8(r4) - stw r7,4(r6) - stwu r8,8(r6) - bdnz 1b - andi. r5,r5,7 -2: cmplwi 0,r5,4 - blt 3f - lwzu r0,4(r4) - addi r5,r5,-4 - stwu r0,4(r6) -3: cmpwi 0,r5,0 - beqlr - mtctr r5 - addi r4,r4,3 - addi r6,r6,3 -4: lbzu r0,1(r4) - stbu r0,1(r6) - bdnz 4b - blr -5: subfic r0,r0,4 - mtctr r0 -6: lbz r7,4(r4) - addi r4,r4,1 - stb r7,4(r6) - addi r6,r6,1 - bdnz 6b - subf r5,r0,r5 - rlwinm. r7,r5,32-3,3,31 - beq 2b - mtctr r7 - b 1b - - .globl backwards_memcpy -backwards_memcpy: - rlwinm. r7,r5,32-3,3,31 /* r7 = r5 >> 3 */ - add r6,r3,r5 - add r4,r4,r5 - beq 2f - andi. r0,r6,3 - mtctr r7 - bne 5f -1: lwz r7,-4(r4) - lwzu r8,-8(r4) - stw r7,-4(r6) - stwu r8,-8(r6) - bdnz 1b - andi. r5,r5,7 -2: cmplwi 0,r5,4 - blt 3f - lwzu r0,-4(r4) - subi r5,r5,4 - stwu r0,-4(r6) -3: cmpwi 0,r5,0 - beqlr - mtctr r5 -4: lbzu r0,-1(r4) - stbu r0,-1(r6) - bdnz 4b - blr -5: mtctr r0 -6: lbzu r7,-1(r4) - stbu r7,-1(r6) - bdnz 6b - subf r5,r0,r5 - rlwinm. r7,r5,32-3,3,31 - beq 2b - mtctr r7 - b 1b - - .globl memcmp -memcmp: - cmpwi 0,r5,0 - blelr - mtctr r5 - addi r6,r3,-1 - addi r4,r4,-1 -1: lbzu r3,1(r6) - lbzu r0,1(r4) - subf. r3,r0,r3 - bdnzt 2,1b - blr - - -/* - * Flush the dcache and invalidate the icache for a range of addresses. - * - * flush_cache(addr, len) - */ - .global flush_cache -flush_cache: - addi 4,4,0x1f /* len = (len + 0x1f) / 0x20 */ - rlwinm. 4,4,27,5,31 - mtctr 4 - beqlr -1: dcbf 0,3 - icbi 0,3 - addi 3,3,0x20 - bdnz 1b - sync - isync - blr - diff --git a/arch/ppc64/boot/string.h b/arch/ppc64/boot/string.h deleted file mode 100644 index 9fdff1cc0d70..000000000000 --- a/arch/ppc64/boot/string.h +++ /dev/null @@ -1,17 +0,0 @@ -#ifndef _PPC_BOOT_STRING_H_ -#define _PPC_BOOT_STRING_H_ -#include <stddef.h> - -extern char *strcpy(char *dest, const char *src); -extern char *strncpy(char *dest, const char *src, size_t n); -extern char *strcat(char *dest, const char *src); -extern int strcmp(const char *s1, const char *s2); -extern size_t strlen(const char *s); -extern size_t strnlen(const char *s, size_t count); - -extern void *memset(void *s, int c, size_t n); -extern void *memmove(void *dest, const void *src, unsigned long n); -extern void *memcpy(void *dest, const void *src, unsigned long n); -extern int memcmp(const void *s1, const void *s2, size_t n); - -#endif /* _PPC_BOOT_STRING_H_ */ diff --git a/arch/ppc64/boot/zImage.lds b/arch/ppc64/boot/zImage.lds deleted file mode 100644 index 4b6bb3ffe3dc..000000000000 --- a/arch/ppc64/boot/zImage.lds +++ /dev/null @@ -1,46 +0,0 @@ -OUTPUT_ARCH(powerpc:common) -ENTRY(_zimage_start) -SECTIONS -{ - . = (4*1024*1024); - _start = .; - .text : - { - *(.text) - *(.fixup) - } - _etext = .; - . = ALIGN(4096); - .data : - { - *(.rodata*) - *(.data*) - *(.sdata*) - __got2_start = .; - *(.got2) - __got2_end = .; - } - - . = ALIGN(4096); - _vmlinux_start = .; - .kernel:vmlinux.strip : { *(.kernel:vmlinux.strip) } - _vmlinux_end = .; - - . = ALIGN(4096); - _initrd_start = .; - .kernel:initrd : { *(.kernel:initrd) } - _initrd_end = .; - - . = ALIGN(4096); - _edata = .; - - . = ALIGN(4096); - __bss_start = .; - .bss : - { - *(.sbss) - *(.bss) - } - . = ALIGN(4096); - _end = . ; -} diff --git a/arch/ppc64/kernel/Makefile b/arch/ppc64/kernel/Makefile index c441aebe7648..e876c213f5ce 100644 --- a/arch/ppc64/kernel/Makefile +++ b/arch/ppc64/kernel/Makefile @@ -2,61 +2,6 @@ # Makefile for the linux ppc64 kernel. # -ifneq ($(CONFIG_PPC_MERGE),y) - -EXTRA_CFLAGS += -mno-minimal-toc -extra-y := head.o vmlinux.lds - -obj-y := misc.o prom.o - -endif - -obj-y += irq.o idle.o dma.o \ - align.o pacaData.o \ - udbg.o ioctl32.o \ - rtc.o \ - cpu_setup_power4.o \ - iommu.o sysfs.o vdso.o firmware.o -obj-y += vdso32/ vdso64/ - -pci-obj-$(CONFIG_PPC_MULTIPLATFORM) += pci_dn.o pci_direct_iommu.o - -obj-$(CONFIG_PCI) += pci.o pci_iommu.o iomap.o $(pci-obj-y) +obj-y += idle.o align.o obj-$(CONFIG_PPC_MULTIPLATFORM) += nvram.o -ifneq ($(CONFIG_PPC_MERGE),y) -obj-$(CONFIG_PPC_MULTIPLATFORM) += prom_init.o -endif - -obj-$(CONFIG_PPC_PSERIES) += udbg_16550.o - -obj-$(CONFIG_KEXEC) += machine_kexec.o -obj-$(CONFIG_EEH) += eeh.o -obj-$(CONFIG_PROC_FS) += proc_ppc64.o -obj-$(CONFIG_MODULES) += module.o -ifneq ($(CONFIG_PPC_MERGE),y) -obj-$(CONFIG_MODULES) += ppc_ksyms.o -endif -obj-$(CONFIG_PPC_RTAS) += rtas_pci.o -obj-$(CONFIG_SCANLOG) += scanlog.o -obj-$(CONFIG_LPARCFG) += lparcfg.o -obj-$(CONFIG_HVC_CONSOLE) += hvconsole.o -ifneq ($(CONFIG_PPC_MERGE),y) -obj-$(CONFIG_BOOTX_TEXT) += btext.o -endif -obj-$(CONFIG_HVCS) += hvcserver.o - -obj-$(CONFIG_PPC_PMAC) += udbg_scc.o - -obj-$(CONFIG_PPC_MAPLE) += udbg_16550.o - -obj-$(CONFIG_KPROBES) += kprobes.o - -CFLAGS_ioctl32.o += -Ifs/ - -ifneq ($(CONFIG_PPC_MERGE),y) -ifeq ($(CONFIG_PPC_ISERIES),y) -arch/ppc64/kernel/head.o: arch/powerpc/kernel/lparmap.s -AFLAGS_head.o += -Iarch/powerpc/kernel -endif -endif diff --git a/arch/ppc64/kernel/asm-offsets.c b/arch/ppc64/kernel/asm-offsets.c deleted file mode 100644 index bce9065da6cb..000000000000 --- a/arch/ppc64/kernel/asm-offsets.c +++ /dev/null @@ -1,196 +0,0 @@ -/* - * This program is used to generate definitions needed by - * assembly language modules. - * - * We use the technique used in the OSF Mach kernel code: - * generate asm statements containing #defines, - * compile this file to assembler, and then extract the - * #defines from the assembly-language output. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include <linux/config.h> -#include <linux/signal.h> -#include <linux/sched.h> -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/string.h> -#include <linux/types.h> -#include <linux/mman.h> -#include <linux/mm.h> -#include <linux/time.h> -#include <linux/hardirq.h> -#include <asm/io.h> -#include <asm/page.h> -#include <asm/pgtable.h> -#include <asm/processor.h> - -#include <asm/paca.h> -#include <asm/lppaca.h> -#include <asm/iseries/hv_lp_event.h> -#include <asm/rtas.h> -#include <asm/cputable.h> -#include <asm/cache.h> -#include <asm/systemcfg.h> -#include <asm/compat.h> - -#define DEFINE(sym, val) \ - asm volatile("\n->" #sym " %0 " #val : : "i" (val)) - -#define BLANK() asm volatile("\n->" : : ) - -int main(void) -{ - /* thread struct on stack */ - DEFINE(TI_FLAGS, offsetof(struct thread_info, flags)); - DEFINE(TI_PREEMPT, offsetof(struct thread_info, preempt_count)); - DEFINE(TI_SC_NOERR, offsetof(struct thread_info, syscall_noerror)); - - /* task_struct->thread */ - DEFINE(THREAD, offsetof(struct task_struct, thread)); - DEFINE(PT_REGS, offsetof(struct thread_struct, regs)); - DEFINE(THREAD_FPEXC_MODE, offsetof(struct thread_struct, fpexc_mode)); - DEFINE(THREAD_FPR0, offsetof(struct thread_struct, fpr[0])); - DEFINE(THREAD_FPSCR, offsetof(struct thread_struct, fpscr)); - DEFINE(KSP, offsetof(struct thread_struct, ksp)); - DEFINE(KSP_VSID, offsetof(struct thread_struct, ksp_vsid)); - -#ifdef CONFIG_ALTIVEC - DEFINE(THREAD_VR0, offsetof(struct thread_struct, vr[0])); - DEFINE(THREAD_VRSAVE, offsetof(struct thread_struct, vrsave)); - DEFINE(THREAD_VSCR, offsetof(struct thread_struct, vscr)); - DEFINE(THREAD_USED_VR, offsetof(struct thread_struct, used_vr)); -#endif /* CONFIG_ALTIVEC */ - DEFINE(MM, offsetof(struct task_struct, mm)); - DEFINE(AUDITCONTEXT, offsetof(struct task_struct, audit_context)); - - DEFINE(DCACHEL1LINESIZE, offsetof(struct ppc64_caches, dline_size)); - DEFINE(DCACHEL1LOGLINESIZE, offsetof(struct ppc64_caches, log_dline_size)); - DEFINE(DCACHEL1LINESPERPAGE, offsetof(struct ppc64_caches, dlines_per_page)); - DEFINE(ICACHEL1LINESIZE, offsetof(struct ppc64_caches, iline_size)); - DEFINE(ICACHEL1LOGLINESIZE, offsetof(struct ppc64_caches, log_iline_size)); - DEFINE(ICACHEL1LINESPERPAGE, offsetof(struct ppc64_caches, ilines_per_page)); - DEFINE(PLATFORM, offsetof(struct systemcfg, platform)); - DEFINE(PLATFORM_LPAR, PLATFORM_LPAR); - - /* paca */ - DEFINE(PACA_SIZE, sizeof(struct paca_struct)); - DEFINE(PACAPACAINDEX, offsetof(struct paca_struct, paca_index)); - DEFINE(PACAPROCSTART, offsetof(struct paca_struct, cpu_start)); - DEFINE(PACAKSAVE, offsetof(struct paca_struct, kstack)); - DEFINE(PACACURRENT, offsetof(struct paca_struct, __current)); - DEFINE(PACASAVEDMSR, offsetof(struct paca_struct, saved_msr)); - DEFINE(PACASTABREAL, offsetof(struct paca_struct, stab_real)); - DEFINE(PACASTABVIRT, offsetof(struct paca_struct, stab_addr)); - DEFINE(PACASTABRR, offsetof(struct paca_struct, stab_rr)); - DEFINE(PACAR1, offsetof(struct paca_struct, saved_r1)); - DEFINE(PACATOC, offsetof(struct paca_struct, kernel_toc)); - DEFINE(PACAPROCENABLED, offsetof(struct paca_struct, proc_enabled)); - DEFINE(PACASLBCACHE, offsetof(struct paca_struct, slb_cache)); - DEFINE(PACASLBCACHEPTR, offsetof(struct paca_struct, slb_cache_ptr)); - DEFINE(PACACONTEXTID, offsetof(struct paca_struct, context.id)); -#ifdef CONFIG_PPC_64K_PAGES - DEFINE(PACAPGDIR, offsetof(struct paca_struct, pgdir)); -#endif -#ifdef CONFIG_HUGETLB_PAGE - DEFINE(PACALOWHTLBAREAS, offsetof(struct paca_struct, context.low_htlb_areas)); - DEFINE(PACAHIGHHTLBAREAS, offsetof(struct paca_struct, context.high_htlb_areas)); -#endif /* CONFIG_HUGETLB_PAGE */ - DEFINE(PACADEFAULTDECR, offsetof(struct paca_struct, default_decr)); - DEFINE(PACA_EXGEN, offsetof(struct paca_struct, exgen)); - DEFINE(PACA_EXMC, offsetof(struct paca_struct, exmc)); - DEFINE(PACA_EXSLB, offsetof(struct paca_struct, exslb)); - DEFINE(PACA_EXDSI, offsetof(struct paca_struct, exdsi)); - DEFINE(PACAEMERGSP, offsetof(struct paca_struct, emergency_sp)); - DEFINE(PACALPPACA, offsetof(struct paca_struct, lppaca)); - DEFINE(PACAHWCPUID, offsetof(struct paca_struct, hw_cpu_id)); - DEFINE(LPPACASRR0, offsetof(struct lppaca, saved_srr0)); - DEFINE(LPPACASRR1, offsetof(struct lppaca, saved_srr1)); - DEFINE(LPPACAANYINT, offsetof(struct lppaca, int_dword.any_int)); - DEFINE(LPPACADECRINT, offsetof(struct lppaca, int_dword.fields.decr_int)); - - /* RTAS */ - DEFINE(RTASBASE, offsetof(struct rtas_t, base)); - DEFINE(RTASENTRY, offsetof(struct rtas_t, entry)); - - /* Interrupt register frame */ - DEFINE(STACK_FRAME_OVERHEAD, STACK_FRAME_OVERHEAD); - - DEFINE(SWITCH_FRAME_SIZE, STACK_FRAME_OVERHEAD + sizeof(struct pt_regs)); - - /* 288 = # of volatile regs, int & fp, for leaf routines */ - /* which do not stack a frame. See the PPC64 ABI. */ - DEFINE(INT_FRAME_SIZE, STACK_FRAME_OVERHEAD + sizeof(struct pt_regs) + 288); - /* Create extra stack space for SRR0 and SRR1 when calling prom/rtas. */ - DEFINE(PROM_FRAME_SIZE, STACK_FRAME_OVERHEAD + sizeof(struct pt_regs) + 16); - DEFINE(RTAS_FRAME_SIZE, STACK_FRAME_OVERHEAD + sizeof(struct pt_regs) + 16); - DEFINE(GPR0, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[0])); - DEFINE(GPR1, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[1])); - DEFINE(GPR2, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[2])); - DEFINE(GPR3, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[3])); - DEFINE(GPR4, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[4])); - DEFINE(GPR5, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[5])); - DEFINE(GPR6, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[6])); - DEFINE(GPR7, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[7])); - DEFINE(GPR8, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[8])); - DEFINE(GPR9, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[9])); - DEFINE(GPR10, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[10])); - DEFINE(GPR11, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[11])); - DEFINE(GPR12, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[12])); - DEFINE(GPR13, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, gpr[13])); - /* - * Note: these symbols include _ because they overlap with special - * register names - */ - DEFINE(_NIP, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, nip)); - DEFINE(_MSR, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, msr)); - DEFINE(_CTR, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, ctr)); - DEFINE(_LINK, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, link)); - DEFINE(_CCR, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, ccr)); - DEFINE(_XER, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, xer)); - DEFINE(_DAR, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, dar)); - DEFINE(_DSISR, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, dsisr)); - DEFINE(ORIG_GPR3, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, orig_gpr3)); - DEFINE(RESULT, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, result)); - DEFINE(_TRAP, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, trap)); - DEFINE(SOFTE, STACK_FRAME_OVERHEAD+offsetof(struct pt_regs, softe)); - - /* These _only_ to be used with {PROM,RTAS}_FRAME_SIZE!!! */ - DEFINE(_SRR0, STACK_FRAME_OVERHEAD+sizeof(struct pt_regs)); - DEFINE(_SRR1, STACK_FRAME_OVERHEAD+sizeof(struct pt_regs)+8); - - DEFINE(CLONE_VM, CLONE_VM); - DEFINE(CLONE_UNTRACED, CLONE_UNTRACED); - - /* About the CPU features table */ - DEFINE(CPU_SPEC_ENTRY_SIZE, sizeof(struct cpu_spec)); - DEFINE(CPU_SPEC_PVR_MASK, offsetof(struct cpu_spec, pvr_mask)); - DEFINE(CPU_SPEC_PVR_VALUE, offsetof(struct cpu_spec, pvr_value)); - DEFINE(CPU_SPEC_FEATURES, offsetof(struct cpu_spec, cpu_features)); - DEFINE(CPU_SPEC_SETUP, offsetof(struct cpu_spec, cpu_setup)); - - /* systemcfg offsets for use by vdso */ - DEFINE(CFG_TB_ORIG_STAMP, offsetof(struct systemcfg, tb_orig_stamp)); - DEFINE(CFG_TB_TICKS_PER_SEC, offsetof(struct systemcfg, tb_ticks_per_sec)); - DEFINE(CFG_TB_TO_XS, offsetof(struct systemcfg, tb_to_xs)); - DEFINE(CFG_STAMP_XSEC, offsetof(struct systemcfg, stamp_xsec)); - DEFINE(CFG_TB_UPDATE_COUNT, offsetof(struct systemcfg, tb_update_count)); - DEFINE(CFG_TZ_MINUTEWEST, offsetof(struct systemcfg, tz_minuteswest)); - DEFINE(CFG_TZ_DSTTIME, offsetof(struct systemcfg, tz_dsttime)); - DEFINE(CFG_SYSCALL_MAP32, offsetof(struct systemcfg, syscall_map_32)); - DEFINE(CFG_SYSCALL_MAP64, offsetof(struct systemcfg, syscall_map_64)); - - /* timeval/timezone offsets for use by vdso */ - DEFINE(TVAL64_TV_SEC, offsetof(struct timeval, tv_sec)); - DEFINE(TVAL64_TV_USEC, offsetof(struct timeval, tv_usec)); - DEFINE(TVAL32_TV_SEC, offsetof(struct compat_timeval, tv_sec)); - DEFINE(TVAL32_TV_USEC, offsetof(struct compat_timeval, tv_usec)); - DEFINE(TZONE_TZ_MINWEST, offsetof(struct timezone, tz_minuteswest)); - DEFINE(TZONE_TZ_DSTTIME, offsetof(struct timezone, tz_dsttime)); - - return 0; -} diff --git a/arch/ppc64/kernel/btext.c b/arch/ppc64/kernel/btext.c deleted file mode 100644 index 506a37885c5c..000000000000 --- a/arch/ppc64/kernel/btext.c +++ /dev/null @@ -1,792 +0,0 @@ -/* - * Procedures for drawing on the screen early on in the boot process. - * - * Benjamin Herrenschmidt <benh@kernel.crashing.org> - */ -#include <linux/config.h> -#include <linux/kernel.h> -#include <linux/string.h> -#include <linux/init.h> - -#include <asm/sections.h> -#include <asm/prom.h> -#include <asm/btext.h> -#include <asm/prom.h> -#include <asm/page.h> -#include <asm/mmu.h> -#include <asm/pgtable.h> -#include <asm/io.h> -#include <asm/lmb.h> -#include <asm/processor.h> -#include <asm/udbg.h> - -#undef NO_SCROLL - -#ifndef NO_SCROLL -static void scrollscreen(void); -#endif - -static void draw_byte(unsigned char c, long locX, long locY); -static void draw_byte_32(unsigned char *bits, unsigned int *base, int rb); -static void draw_byte_16(unsigned char *bits, unsigned int *base, int rb); -static void draw_byte_8(unsigned char *bits, unsigned int *base, int rb); - -static int g_loc_X; -static int g_loc_Y; -static int g_max_loc_X; -static int g_max_loc_Y; - -static int dispDeviceRowBytes; -static int dispDeviceDepth; -static int dispDeviceRect[4]; -static unsigned char *dispDeviceBase, *logicalDisplayBase; - -unsigned long disp_BAT[2] __initdata = {0, 0}; - -#define cmapsz (16*256) - -static unsigned char vga_font[cmapsz]; - -int boot_text_mapped; -int force_printk_to_btext = 0; - - -/* Here's a small text engine to use during early boot - * or for debugging purposes - * - * todo: - * - * - build some kind of vgacon with it to enable early printk - * - move to a separate file - * - add a few video driver hooks to keep in sync with display - * changes. - */ - -void map_boot_text(void) -{ - unsigned long base, offset, size; - unsigned char *vbase; - - /* By default, we are no longer mapped */ - boot_text_mapped = 0; - if (dispDeviceBase == 0) - return; - base = ((unsigned long) dispDeviceBase) & 0xFFFFF000UL; - offset = ((unsigned long) dispDeviceBase) - base; - size = dispDeviceRowBytes * dispDeviceRect[3] + offset - + dispDeviceRect[0]; - vbase = __ioremap(base, size, _PAGE_NO_CACHE); - if (vbase == 0) - return; - logicalDisplayBase = vbase + offset; - boot_text_mapped = 1; -} - -int btext_initialize(struct device_node *np) -{ - unsigned int width, height, depth, pitch; - unsigned long address = 0; - u32 *prop; - - prop = (u32 *)get_property(np, "width", NULL); - if (prop == NULL) - return -EINVAL; - width = *prop; - prop = (u32 *)get_property(np, "height", NULL); - if (prop == NULL) - return -EINVAL; - height = *prop; - prop = (u32 *)get_property(np, "depth", NULL); - if (prop == NULL) - return -EINVAL; - depth = *prop; - pitch = width * ((depth + 7) / 8); - prop = (u32 *)get_property(np, "linebytes", NULL); - if (prop) - pitch = *prop; - if (pitch == 1) - pitch = 0x1000; - prop = (u32 *)get_property(np, "address", NULL); - if (prop) - address = *prop; - - /* FIXME: Add support for PCI reg properties */ - - if (address == 0) - return -EINVAL; - - g_loc_X = 0; - g_loc_Y = 0; - g_max_loc_X = width / 8; - g_max_loc_Y = height / 16; - logicalDisplayBase = (unsigned char *)address; - dispDeviceBase = (unsigned char *)address; - dispDeviceRowBytes = pitch; - dispDeviceDepth = depth; - dispDeviceRect[0] = dispDeviceRect[1] = 0; - dispDeviceRect[2] = width; - dispDeviceRect[3] = height; - - map_boot_text(); - - return 0; -} - -static void btext_putc(unsigned char c) -{ - btext_drawchar(c); -} - -void __init init_boot_display(void) -{ - char *name; - struct device_node *np = NULL; - int rc = -ENODEV; - - printk("trying to initialize btext ...\n"); - - name = (char *)get_property(of_chosen, "linux,stdout-path", NULL); - if (name != NULL) { - np = of_find_node_by_path(name); - if (np != NULL) { - if (strcmp(np->type, "display") != 0) { - printk("boot stdout isn't a display !\n"); - of_node_put(np); - np = NULL; - } - } - } - if (np) - rc = btext_initialize(np); - if (rc) { - for (np = NULL; (np = of_find_node_by_type(np, "display"));) { - if (get_property(np, "linux,opened", NULL)) { - printk("trying %s ...\n", np->full_name); - rc = btext_initialize(np); - printk("result: %d\n", rc); - } - if (rc == 0) - break; - } - } - if (rc == 0 && udbg_putc == NULL) - udbg_putc = btext_putc; -} - - -/* Calc the base address of a given point (x,y) */ -static unsigned char * calc_base(int x, int y) -{ - unsigned char *base; - - base = logicalDisplayBase; - if (base == 0) - base = dispDeviceBase; - base += (x + dispDeviceRect[0]) * (dispDeviceDepth >> 3); - base += (y + dispDeviceRect[1]) * dispDeviceRowBytes; - return base; -} - -/* Adjust the display to a new resolution */ -void btext_update_display(unsigned long phys, int width, int height, - int depth, int pitch) -{ - if (dispDeviceBase == 0) - return; - - /* check it's the same frame buffer (within 256MB) */ - if ((phys ^ (unsigned long)dispDeviceBase) & 0xf0000000) - return; - - dispDeviceBase = (__u8 *) phys; - dispDeviceRect[0] = 0; - dispDeviceRect[1] = 0; - dispDeviceRect[2] = width; - dispDeviceRect[3] = height; - dispDeviceDepth = depth; - dispDeviceRowBytes = pitch; - if (boot_text_mapped) { - iounmap(logicalDisplayBase); - boot_text_mapped = 0; - } - map_boot_text(); - g_loc_X = 0; - g_loc_Y = 0; - g_max_loc_X = width / 8; - g_max_loc_Y = height / 16; -} - -void btext_clearscreen(void) -{ - unsigned long *base = (unsigned long *)calc_base(0, 0); - unsigned long width = ((dispDeviceRect[2] - dispDeviceRect[0]) * - (dispDeviceDepth >> 3)) >> 3; - int i,j; - - for (i=0; i<(dispDeviceRect[3] - dispDeviceRect[1]); i++) - { - unsigned long *ptr = base; - for(j=width; j; --j) - *(ptr++) = 0; - base += (dispDeviceRowBytes >> 3); - } -} - -#ifndef NO_SCROLL -static void scrollscreen(void) -{ - unsigned long *src = (unsigned long *)calc_base(0,16); - unsigned long *dst = (unsigned long *)calc_base(0,0); - unsigned long width = ((dispDeviceRect[2] - dispDeviceRect[0]) * - (dispDeviceDepth >> 3)) >> 3; - int i,j; - - for (i=0; i<(dispDeviceRect[3] - dispDeviceRect[1] - 16); i++) - { - unsigned long *src_ptr = src; - unsigned long *dst_ptr = dst; - for(j=width; j; --j) - *(dst_ptr++) = *(src_ptr++); - src += (dispDeviceRowBytes >> 3); - dst += (dispDeviceRowBytes >> 3); - } - for (i=0; i<16; i++) - { - unsigned long *dst_ptr = dst; - for(j=width; j; --j) - *(dst_ptr++) = 0; - dst += (dispDeviceRowBytes >> 3); - } -} -#endif /* ndef NO_SCROLL */ - -void btext_drawchar(char c) -{ - int cline = 0; -#ifdef NO_SCROLL - int x; -#endif - if (!boot_text_mapped) - return; - - switch (c) { - case '\b': - if (g_loc_X > 0) - --g_loc_X; - break; - case '\t': - g_loc_X = (g_loc_X & -8) + 8; - break; - case '\r': - g_loc_X = 0; - break; - case '\n': - g_loc_X = 0; - g_loc_Y++; - cline = 1; - break; - default: - draw_byte(c, g_loc_X++, g_loc_Y); - } - if (g_loc_X >= g_max_loc_X) { - g_loc_X = 0; - g_loc_Y++; - cline = 1; - } -#ifndef NO_SCROLL - while (g_loc_Y >= g_max_loc_Y) { - scrollscreen(); - g_loc_Y--; - } -#else - /* wrap around from bottom to top of screen so we don't - waste time scrolling each line. -- paulus. */ - if (g_loc_Y >= g_max_loc_Y) - g_loc_Y = 0; - if (cline) { - for (x = 0; x < g_max_loc_X; ++x) - draw_byte(' ', x, g_loc_Y); - } -#endif -} - -void btext_drawstring(const char *c) -{ - if (!boot_text_mapped) - return; - while (*c) - btext_drawchar(*c++); -} - -void btext_drawhex(unsigned long v) -{ - char *hex_table = "0123456789abcdef"; - - if (!boot_text_mapped) - return; - btext_drawchar(hex_table[(v >> 60) & 0x0000000FUL]); - btext_drawchar(hex_table[(v >> 56) & 0x0000000FUL]); - btext_drawchar(hex_table[(v >> 52) & 0x0000000FUL]); - btext_drawchar(hex_table[(v >> 48) & 0x0000000FUL]); - btext_drawchar(hex_table[(v >> 44) & 0x0000000FUL]); - btext_drawchar(hex_table[(v >> 40) & 0x0000000FUL]); - btext_drawchar(hex_table[(v >> 36) & 0x0000000FUL]); - btext_drawchar(hex_table[(v >> 32) & 0x0000000FUL]); - btext_drawchar(hex_table[(v >> 28) & 0x0000000FUL]); - btext_drawchar(hex_table[(v >> 24) & 0x0000000FUL]); - btext_drawchar(hex_table[(v >> 20) & 0x0000000FUL]); - btext_drawchar(hex_table[(v >> 16) & 0x0000000FUL]); - btext_drawchar(hex_table[(v >> 12) & 0x0000000FUL]); - btext_drawchar(hex_table[(v >> 8) & 0x0000000FUL]); - btext_drawchar(hex_table[(v >> 4) & 0x0000000FUL]); - btext_drawchar(hex_table[(v >> 0) & 0x0000000FUL]); - btext_drawchar(' '); -} - -static void draw_byte(unsigned char c, long locX, long locY) -{ - unsigned char *base = calc_base(locX << 3, locY << 4); - unsigned char *font = &vga_font[((unsigned int)c) * 16]; - int rb = dispDeviceRowBytes; - - switch(dispDeviceDepth) { - case 24: - case 32: - draw_byte_32(font, (unsigned int *)base, rb); - break; - case 15: - case 16: - draw_byte_16(font, (unsigned int *)base, rb); - break; - case 8: - draw_byte_8(font, (unsigned int *)base, rb); - break; - } -} - -static unsigned int expand_bits_8[16] = { - 0x00000000, - 0x000000ff, - 0x0000ff00, - 0x0000ffff, - 0x00ff0000, - 0x00ff00ff, - 0x00ffff00, - 0x00ffffff, - 0xff000000, - 0xff0000ff, - 0xff00ff00, - 0xff00ffff, - 0xffff0000, - 0xffff00ff, - 0xffffff00, - 0xffffffff -}; - -static unsigned int expand_bits_16[4] = { - 0x00000000, - 0x0000ffff, - 0xffff0000, - 0xffffffff -}; - - -static void draw_byte_32(unsigned char *font, unsigned int *base, int rb) -{ - int l, bits; - int fg = 0xFFFFFFFFUL; - int bg = 0x00000000UL; - - for (l = 0; l < 16; ++l) - { - bits = *font++; - base[0] = (-(bits >> 7) & fg) ^ bg; - base[1] = (-((bits >> 6) & 1) & fg) ^ bg; - base[2] = (-((bits >> 5) & 1) & fg) ^ bg; - base[3] = (-((bits >> 4) & 1) & fg) ^ bg; - base[4] = (-((bits >> 3) & 1) & fg) ^ bg; - base[5] = (-((bits >> 2) & 1) & fg) ^ bg; - base[6] = (-((bits >> 1) & 1) & fg) ^ bg; - base[7] = (-(bits & 1) & fg) ^ bg; - base = (unsigned int *) ((char *)base + rb); - } -} - -static void draw_byte_16(unsigned char *font, unsigned int *base, int rb) -{ - int l, bits; - int fg = 0xFFFFFFFFUL; - int bg = 0x00000000UL; - unsigned int *eb = (int *)expand_bits_16; - - for (l = 0; l < 16; ++l) - { - bits = *font++; - base[0] = (eb[bits >> 6] & fg) ^ bg; - base[1] = (eb[(bits >> 4) & 3] & fg) ^ bg; - base[2] = (eb[(bits >> 2) & 3] & fg) ^ bg; - base[3] = (eb[bits & 3] & fg) ^ bg; - base = (unsigned int *) ((char *)base + rb); - } -} - -static void draw_byte_8(unsigned char *font, unsigned int *base, int rb) -{ - int l, bits; - int fg = 0x0F0F0F0FUL; - int bg = 0x00000000UL; - unsigned int *eb = (int *)expand_bits_8; - - for (l = 0; l < 16; ++l) - { - bits = *font++; - base[0] = (eb[bits >> 4] & fg) ^ bg; - base[1] = (eb[bits & 0xf] & fg) ^ bg; - base = (unsigned int *) ((char *)base + rb); - } -} - -static unsigned char vga_font[cmapsz] = { -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7e, 0x81, 0xa5, 0x81, 0x81, 0xbd, -0x99, 0x81, 0x81, 0x7e, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7e, 0xff, -0xdb, 0xff, 0xff, 0xc3, 0xe7, 0xff, 0xff, 0x7e, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x6c, 0xfe, 0xfe, 0xfe, 0xfe, 0x7c, 0x38, 0x10, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x38, 0x7c, 0xfe, -0x7c, 0x38, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, -0x3c, 0x3c, 0xe7, 0xe7, 0xe7, 0x18, 0x18, 0x3c, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x18, 0x3c, 0x7e, 0xff, 0xff, 0x7e, 0x18, 0x18, 0x3c, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x3c, -0x3c, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff, -0xff, 0xff, 0xe7, 0xc3, 0xc3, 0xe7, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, -0x00, 0x00, 0x00, 0x00, 0x00, 0x3c, 0x66, 0x42, 0x42, 0x66, 0x3c, 0x00, -0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xc3, 0x99, 0xbd, -0xbd, 0x99, 0xc3, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x1e, 0x0e, -0x1a, 0x32, 0x78, 0xcc, 0xcc, 0xcc, 0xcc, 0x78, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x3c, 0x66, 0x66, 0x66, 0x66, 0x3c, 0x18, 0x7e, 0x18, 0x18, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3f, 0x33, 0x3f, 0x30, 0x30, 0x30, -0x30, 0x70, 0xf0, 0xe0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7f, 0x63, -0x7f, 0x63, 0x63, 0x63, 0x63, 0x67, 0xe7, 0xe6, 0xc0, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x18, 0x18, 0xdb, 0x3c, 0xe7, 0x3c, 0xdb, 0x18, 0x18, -0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xc0, 0xe0, 0xf0, 0xf8, 0xfe, 0xf8, -0xf0, 0xe0, 0xc0, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x06, 0x0e, -0x1e, 0x3e, 0xfe, 0x3e, 0x1e, 0x0e, 0x06, 0x02, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x18, 0x3c, 0x7e, 0x18, 0x18, 0x18, 0x7e, 0x3c, 0x18, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x66, 0x66, 0x66, 0x66, 0x66, 0x66, -0x66, 0x00, 0x66, 0x66, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7f, 0xdb, -0xdb, 0xdb, 0x7b, 0x1b, 0x1b, 0x1b, 0x1b, 0x1b, 0x00, 0x00, 0x00, 0x00, -0x00, 0x7c, 0xc6, 0x60, 0x38, 0x6c, 0xc6, 0xc6, 0x6c, 0x38, 0x0c, 0xc6, -0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0xfe, 0xfe, 0xfe, 0xfe, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x3c, -0x7e, 0x18, 0x18, 0x18, 0x7e, 0x3c, 0x18, 0x7e, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x18, 0x3c, 0x7e, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, -0x18, 0x7e, 0x3c, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x18, 0x0c, 0xfe, 0x0c, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x60, 0xfe, 0x60, 0x30, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0, 0xc0, -0xc0, 0xfe, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x24, 0x66, 0xff, 0x66, 0x24, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x10, 0x38, 0x38, 0x7c, 0x7c, 0xfe, 0xfe, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0xfe, 0x7c, 0x7c, -0x38, 0x38, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x18, 0x3c, 0x3c, 0x3c, 0x18, 0x18, 0x18, 0x00, 0x18, 0x18, -0x00, 0x00, 0x00, 0x00, 0x00, 0x66, 0x66, 0x66, 0x24, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x6c, -0x6c, 0xfe, 0x6c, 0x6c, 0x6c, 0xfe, 0x6c, 0x6c, 0x00, 0x00, 0x00, 0x00, -0x18, 0x18, 0x7c, 0xc6, 0xc2, 0xc0, 0x7c, 0x06, 0x06, 0x86, 0xc6, 0x7c, -0x18, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc2, 0xc6, 0x0c, 0x18, -0x30, 0x60, 0xc6, 0x86, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x6c, -0x6c, 0x38, 0x76, 0xdc, 0xcc, 0xcc, 0xcc, 0x76, 0x00, 0x00, 0x00, 0x00, -0x00, 0x30, 0x30, 0x30, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0c, 0x18, 0x30, 0x30, 0x30, 0x30, -0x30, 0x30, 0x18, 0x0c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x18, -0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x18, 0x30, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x66, 0x3c, 0xff, 0x3c, 0x66, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x7e, -0x18, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x18, 0x30, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7e, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x18, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x02, 0x06, 0x0c, 0x18, 0x30, 0x60, 0xc0, 0x80, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x7c, 0xc6, 0xc6, 0xce, 0xde, 0xf6, 0xe6, 0xc6, 0xc6, 0x7c, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x38, 0x78, 0x18, 0x18, 0x18, -0x18, 0x18, 0x18, 0x7e, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7c, 0xc6, -0x06, 0x0c, 0x18, 0x30, 0x60, 0xc0, 0xc6, 0xfe, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x7c, 0xc6, 0x06, 0x06, 0x3c, 0x06, 0x06, 0x06, 0xc6, 0x7c, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0c, 0x1c, 0x3c, 0x6c, 0xcc, 0xfe, -0x0c, 0x0c, 0x0c, 0x1e, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0xc0, -0xc0, 0xc0, 0xfc, 0x06, 0x06, 0x06, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x38, 0x60, 0xc0, 0xc0, 0xfc, 0xc6, 0xc6, 0xc6, 0xc6, 0x7c, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0xc6, 0x06, 0x06, 0x0c, 0x18, -0x30, 0x30, 0x30, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7c, 0xc6, -0xc6, 0xc6, 0x7c, 0xc6, 0xc6, 0xc6, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x7c, 0xc6, 0xc6, 0xc6, 0x7e, 0x06, 0x06, 0x06, 0x0c, 0x78, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x00, 0x00, -0x00, 0x18, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x18, 0x18, 0x00, 0x00, 0x00, 0x18, 0x18, 0x30, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x06, 0x0c, 0x18, 0x30, 0x60, 0x30, 0x18, 0x0c, 0x06, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7e, 0x00, 0x00, -0x7e, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x60, -0x30, 0x18, 0x0c, 0x06, 0x0c, 0x18, 0x30, 0x60, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x7c, 0xc6, 0xc6, 0x0c, 0x18, 0x18, 0x18, 0x00, 0x18, 0x18, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7c, 0xc6, 0xc6, 0xc6, 0xde, 0xde, -0xde, 0xdc, 0xc0, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x38, -0x6c, 0xc6, 0xc6, 0xfe, 0xc6, 0xc6, 0xc6, 0xc6, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0xfc, 0x66, 0x66, 0x66, 0x7c, 0x66, 0x66, 0x66, 0x66, 0xfc, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3c, 0x66, 0xc2, 0xc0, 0xc0, 0xc0, -0xc0, 0xc2, 0x66, 0x3c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0x6c, -0x66, 0x66, 0x66, 0x66, 0x66, 0x66, 0x6c, 0xf8, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0xfe, 0x66, 0x62, 0x68, 0x78, 0x68, 0x60, 0x62, 0x66, 0xfe, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0x66, 0x62, 0x68, 0x78, 0x68, -0x60, 0x60, 0x60, 0xf0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3c, 0x66, -0xc2, 0xc0, 0xc0, 0xde, 0xc6, 0xc6, 0x66, 0x3a, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0xc6, 0xc6, 0xc6, 0xc6, 0xfe, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3c, 0x18, 0x18, 0x18, 0x18, 0x18, -0x18, 0x18, 0x18, 0x3c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1e, 0x0c, -0x0c, 0x0c, 0x0c, 0x0c, 0xcc, 0xcc, 0xcc, 0x78, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0xe6, 0x66, 0x66, 0x6c, 0x78, 0x78, 0x6c, 0x66, 0x66, 0xe6, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0, 0x60, 0x60, 0x60, 0x60, 0x60, -0x60, 0x62, 0x66, 0xfe, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc3, 0xe7, -0xff, 0xff, 0xdb, 0xc3, 0xc3, 0xc3, 0xc3, 0xc3, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0xc6, 0xe6, 0xf6, 0xfe, 0xde, 0xce, 0xc6, 0xc6, 0xc6, 0xc6, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7c, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, -0xc6, 0xc6, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0x66, -0x66, 0x66, 0x7c, 0x60, 0x60, 0x60, 0x60, 0xf0, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x7c, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xd6, 0xde, 0x7c, -0x0c, 0x0e, 0x00, 0x00, 0x00, 0x00, 0xfc, 0x66, 0x66, 0x66, 0x7c, 0x6c, -0x66, 0x66, 0x66, 0xe6, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7c, 0xc6, -0xc6, 0x60, 0x38, 0x0c, 0x06, 0xc6, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0xff, 0xdb, 0x99, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x3c, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, -0xc6, 0xc6, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc3, 0xc3, -0xc3, 0xc3, 0xc3, 0xc3, 0xc3, 0x66, 0x3c, 0x18, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0xc3, 0xc3, 0xc3, 0xc3, 0xc3, 0xdb, 0xdb, 0xff, 0x66, 0x66, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc3, 0xc3, 0x66, 0x3c, 0x18, 0x18, -0x3c, 0x66, 0xc3, 0xc3, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc3, 0xc3, -0xc3, 0x66, 0x3c, 0x18, 0x18, 0x18, 0x18, 0x3c, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0xff, 0xc3, 0x86, 0x0c, 0x18, 0x30, 0x60, 0xc1, 0xc3, 0xff, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3c, 0x30, 0x30, 0x30, 0x30, 0x30, -0x30, 0x30, 0x30, 0x3c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, -0xc0, 0xe0, 0x70, 0x38, 0x1c, 0x0e, 0x06, 0x02, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x3c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x3c, -0x00, 0x00, 0x00, 0x00, 0x10, 0x38, 0x6c, 0xc6, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0x00, 0x00, -0x30, 0x30, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x0c, 0x7c, -0xcc, 0xcc, 0xcc, 0x76, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe0, 0x60, -0x60, 0x78, 0x6c, 0x66, 0x66, 0x66, 0x66, 0x7c, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x7c, 0xc6, 0xc0, 0xc0, 0xc0, 0xc6, 0x7c, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1c, 0x0c, 0x0c, 0x3c, 0x6c, 0xcc, -0xcc, 0xcc, 0xcc, 0x76, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x7c, 0xc6, 0xfe, 0xc0, 0xc0, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x38, 0x6c, 0x64, 0x60, 0xf0, 0x60, 0x60, 0x60, 0x60, 0xf0, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x76, 0xcc, 0xcc, -0xcc, 0xcc, 0xcc, 0x7c, 0x0c, 0xcc, 0x78, 0x00, 0x00, 0x00, 0xe0, 0x60, -0x60, 0x6c, 0x76, 0x66, 0x66, 0x66, 0x66, 0xe6, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x18, 0x18, 0x00, 0x38, 0x18, 0x18, 0x18, 0x18, 0x18, 0x3c, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x06, 0x06, 0x00, 0x0e, 0x06, 0x06, -0x06, 0x06, 0x06, 0x06, 0x66, 0x66, 0x3c, 0x00, 0x00, 0x00, 0xe0, 0x60, -0x60, 0x66, 0x6c, 0x78, 0x78, 0x6c, 0x66, 0xe6, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x38, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x3c, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe6, 0xff, 0xdb, -0xdb, 0xdb, 0xdb, 0xdb, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0xdc, 0x66, 0x66, 0x66, 0x66, 0x66, 0x66, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x7c, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0x7c, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xdc, 0x66, 0x66, -0x66, 0x66, 0x66, 0x7c, 0x60, 0x60, 0xf0, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x76, 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0x7c, 0x0c, 0x0c, 0x1e, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0xdc, 0x76, 0x66, 0x60, 0x60, 0x60, 0xf0, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7c, 0xc6, 0x60, -0x38, 0x0c, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x30, -0x30, 0xfc, 0x30, 0x30, 0x30, 0x30, 0x36, 0x1c, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0x76, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc3, 0xc3, 0xc3, -0xc3, 0x66, 0x3c, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0xc3, 0xc3, 0xc3, 0xdb, 0xdb, 0xff, 0x66, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0xc3, 0x66, 0x3c, 0x18, 0x3c, 0x66, 0xc3, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc6, 0xc6, 0xc6, -0xc6, 0xc6, 0xc6, 0x7e, 0x06, 0x0c, 0xf8, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0xfe, 0xcc, 0x18, 0x30, 0x60, 0xc6, 0xfe, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x0e, 0x18, 0x18, 0x18, 0x70, 0x18, 0x18, 0x18, 0x18, 0x0e, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x18, 0x18, 0x00, 0x18, -0x18, 0x18, 0x18, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x18, -0x18, 0x18, 0x0e, 0x18, 0x18, 0x18, 0x18, 0x70, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x76, 0xdc, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x38, 0x6c, 0xc6, -0xc6, 0xc6, 0xfe, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3c, 0x66, -0xc2, 0xc0, 0xc0, 0xc0, 0xc2, 0x66, 0x3c, 0x0c, 0x06, 0x7c, 0x00, 0x00, -0x00, 0x00, 0xcc, 0x00, 0x00, 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0x76, -0x00, 0x00, 0x00, 0x00, 0x00, 0x0c, 0x18, 0x30, 0x00, 0x7c, 0xc6, 0xfe, -0xc0, 0xc0, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x38, 0x6c, -0x00, 0x78, 0x0c, 0x7c, 0xcc, 0xcc, 0xcc, 0x76, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0xcc, 0x00, 0x00, 0x78, 0x0c, 0x7c, 0xcc, 0xcc, 0xcc, 0x76, -0x00, 0x00, 0x00, 0x00, 0x00, 0x60, 0x30, 0x18, 0x00, 0x78, 0x0c, 0x7c, -0xcc, 0xcc, 0xcc, 0x76, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x6c, 0x38, -0x00, 0x78, 0x0c, 0x7c, 0xcc, 0xcc, 0xcc, 0x76, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x3c, 0x66, 0x60, 0x60, 0x66, 0x3c, 0x0c, 0x06, -0x3c, 0x00, 0x00, 0x00, 0x00, 0x10, 0x38, 0x6c, 0x00, 0x7c, 0xc6, 0xfe, -0xc0, 0xc0, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc6, 0x00, -0x00, 0x7c, 0xc6, 0xfe, 0xc0, 0xc0, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00, -0x00, 0x60, 0x30, 0x18, 0x00, 0x7c, 0xc6, 0xfe, 0xc0, 0xc0, 0xc6, 0x7c, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x66, 0x00, 0x00, 0x38, 0x18, 0x18, -0x18, 0x18, 0x18, 0x3c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x3c, 0x66, -0x00, 0x38, 0x18, 0x18, 0x18, 0x18, 0x18, 0x3c, 0x00, 0x00, 0x00, 0x00, -0x00, 0x60, 0x30, 0x18, 0x00, 0x38, 0x18, 0x18, 0x18, 0x18, 0x18, 0x3c, -0x00, 0x00, 0x00, 0x00, 0x00, 0xc6, 0x00, 0x10, 0x38, 0x6c, 0xc6, 0xc6, -0xfe, 0xc6, 0xc6, 0xc6, 0x00, 0x00, 0x00, 0x00, 0x38, 0x6c, 0x38, 0x00, -0x38, 0x6c, 0xc6, 0xc6, 0xfe, 0xc6, 0xc6, 0xc6, 0x00, 0x00, 0x00, 0x00, -0x18, 0x30, 0x60, 0x00, 0xfe, 0x66, 0x60, 0x7c, 0x60, 0x60, 0x66, 0xfe, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x6e, 0x3b, 0x1b, -0x7e, 0xd8, 0xdc, 0x77, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3e, 0x6c, -0xcc, 0xcc, 0xfe, 0xcc, 0xcc, 0xcc, 0xcc, 0xce, 0x00, 0x00, 0x00, 0x00, -0x00, 0x10, 0x38, 0x6c, 0x00, 0x7c, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0x7c, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc6, 0x00, 0x00, 0x7c, 0xc6, 0xc6, -0xc6, 0xc6, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x60, 0x30, 0x18, -0x00, 0x7c, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00, -0x00, 0x30, 0x78, 0xcc, 0x00, 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0x76, -0x00, 0x00, 0x00, 0x00, 0x00, 0x60, 0x30, 0x18, 0x00, 0xcc, 0xcc, 0xcc, -0xcc, 0xcc, 0xcc, 0x76, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc6, 0x00, -0x00, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0x7e, 0x06, 0x0c, 0x78, 0x00, -0x00, 0xc6, 0x00, 0x7c, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0x7c, -0x00, 0x00, 0x00, 0x00, 0x00, 0xc6, 0x00, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, -0xc6, 0xc6, 0xc6, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x7e, -0xc3, 0xc0, 0xc0, 0xc0, 0xc3, 0x7e, 0x18, 0x18, 0x00, 0x00, 0x00, 0x00, -0x00, 0x38, 0x6c, 0x64, 0x60, 0xf0, 0x60, 0x60, 0x60, 0x60, 0xe6, 0xfc, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc3, 0x66, 0x3c, 0x18, 0xff, 0x18, -0xff, 0x18, 0x18, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0x66, 0x66, -0x7c, 0x62, 0x66, 0x6f, 0x66, 0x66, 0x66, 0xf3, 0x00, 0x00, 0x00, 0x00, -0x00, 0x0e, 0x1b, 0x18, 0x18, 0x18, 0x7e, 0x18, 0x18, 0x18, 0x18, 0x18, -0xd8, 0x70, 0x00, 0x00, 0x00, 0x18, 0x30, 0x60, 0x00, 0x78, 0x0c, 0x7c, -0xcc, 0xcc, 0xcc, 0x76, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0c, 0x18, 0x30, -0x00, 0x38, 0x18, 0x18, 0x18, 0x18, 0x18, 0x3c, 0x00, 0x00, 0x00, 0x00, -0x00, 0x18, 0x30, 0x60, 0x00, 0x7c, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0x7c, -0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x30, 0x60, 0x00, 0xcc, 0xcc, 0xcc, -0xcc, 0xcc, 0xcc, 0x76, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x76, 0xdc, -0x00, 0xdc, 0x66, 0x66, 0x66, 0x66, 0x66, 0x66, 0x00, 0x00, 0x00, 0x00, -0x76, 0xdc, 0x00, 0xc6, 0xe6, 0xf6, 0xfe, 0xde, 0xce, 0xc6, 0xc6, 0xc6, -0x00, 0x00, 0x00, 0x00, 0x00, 0x3c, 0x6c, 0x6c, 0x3e, 0x00, 0x7e, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x6c, 0x6c, -0x38, 0x00, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x30, 0x30, 0x00, 0x30, 0x30, 0x60, 0xc0, 0xc6, 0xc6, 0x7c, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0xc0, -0xc0, 0xc0, 0xc0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0xfe, 0x06, 0x06, 0x06, 0x06, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0xc0, 0xc0, 0xc2, 0xc6, 0xcc, 0x18, 0x30, 0x60, 0xce, 0x9b, 0x06, -0x0c, 0x1f, 0x00, 0x00, 0x00, 0xc0, 0xc0, 0xc2, 0xc6, 0xcc, 0x18, 0x30, -0x66, 0xce, 0x96, 0x3e, 0x06, 0x06, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18, -0x00, 0x18, 0x18, 0x18, 0x3c, 0x3c, 0x3c, 0x18, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x36, 0x6c, 0xd8, 0x6c, 0x36, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xd8, 0x6c, 0x36, -0x6c, 0xd8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x11, 0x44, 0x11, 0x44, -0x11, 0x44, 0x11, 0x44, 0x11, 0x44, 0x11, 0x44, 0x11, 0x44, 0x11, 0x44, -0x55, 0xaa, 0x55, 0xaa, 0x55, 0xaa, 0x55, 0xaa, 0x55, 0xaa, 0x55, 0xaa, -0x55, 0xaa, 0x55, 0xaa, 0xdd, 0x77, 0xdd, 0x77, 0xdd, 0x77, 0xdd, 0x77, -0xdd, 0x77, 0xdd, 0x77, 0xdd, 0x77, 0xdd, 0x77, 0x18, 0x18, 0x18, 0x18, -0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, -0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0xf8, 0x18, 0x18, 0x18, 0x18, -0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0xf8, 0x18, 0xf8, -0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x36, 0x36, 0x36, 0x36, -0x36, 0x36, 0x36, 0xf6, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0x36, 0x36, 0x36, 0x36, -0x36, 0x36, 0x36, 0x36, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf8, 0x18, 0xf8, -0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x36, 0x36, 0x36, 0x36, -0x36, 0xf6, 0x06, 0xf6, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, -0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, -0x36, 0x36, 0x36, 0x36, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0x06, 0xf6, -0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, -0x36, 0xf6, 0x06, 0xfe, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0xfe, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x18, 0x18, 0x18, 0xf8, 0x18, 0xf8, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0xf8, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, -0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x1f, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0xff, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0xff, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, -0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x1f, 0x18, 0x18, 0x18, 0x18, -0x18, 0x18, 0x18, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x18, 0x18, -0x18, 0x18, 0x18, 0xff, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, -0x18, 0x18, 0x18, 0x18, 0x18, 0x1f, 0x18, 0x1f, 0x18, 0x18, 0x18, 0x18, -0x18, 0x18, 0x18, 0x18, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x37, -0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, -0x36, 0x37, 0x30, 0x3f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x3f, 0x30, 0x37, 0x36, 0x36, 0x36, 0x36, -0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0xf7, 0x00, 0xff, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0xff, 0x00, 0xf7, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, -0x36, 0x36, 0x36, 0x36, 0x36, 0x37, 0x30, 0x37, 0x36, 0x36, 0x36, 0x36, -0x36, 0x36, 0x36, 0x36, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0x00, 0xff, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x36, 0x36, 0x36, 0x36, -0x36, 0xf7, 0x00, 0xf7, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, -0x18, 0x18, 0x18, 0x18, 0x18, 0xff, 0x00, 0xff, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0xff, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0xff, 0x00, 0xff, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0x36, 0x36, 0x36, 0x36, -0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x3f, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x18, 0x18, -0x18, 0x1f, 0x18, 0x1f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x1f, 0x18, 0x1f, 0x18, 0x18, 0x18, 0x18, -0x18, 0x18, 0x18, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3f, -0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, -0x36, 0x36, 0x36, 0xff, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, 0x36, -0x18, 0x18, 0x18, 0x18, 0x18, 0xff, 0x18, 0xff, 0x18, 0x18, 0x18, 0x18, -0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0xf8, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x1f, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, -0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, -0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, -0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xf0, 0xf0, 0xf0, 0xf0, -0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, 0xf0, -0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, -0x0f, 0x0f, 0x0f, 0x0f, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x76, 0xdc, 0xd8, 0xd8, 0xd8, 0xdc, 0x76, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x78, 0xcc, 0xcc, 0xcc, 0xd8, 0xcc, 0xc6, 0xc6, 0xc6, 0xcc, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0xc6, 0xc6, 0xc0, 0xc0, 0xc0, -0xc0, 0xc0, 0xc0, 0xc0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0xfe, 0x6c, 0x6c, 0x6c, 0x6c, 0x6c, 0x6c, 0x6c, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0xfe, 0xc6, 0x60, 0x30, 0x18, 0x30, 0x60, 0xc6, 0xfe, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7e, 0xd8, 0xd8, -0xd8, 0xd8, 0xd8, 0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x66, 0x66, 0x66, 0x66, 0x66, 0x7c, 0x60, 0x60, 0xc0, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x76, 0xdc, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7e, 0x18, 0x3c, 0x66, 0x66, -0x66, 0x3c, 0x18, 0x7e, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, -0x6c, 0xc6, 0xc6, 0xfe, 0xc6, 0xc6, 0x6c, 0x38, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x38, 0x6c, 0xc6, 0xc6, 0xc6, 0x6c, 0x6c, 0x6c, 0x6c, 0xee, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1e, 0x30, 0x18, 0x0c, 0x3e, 0x66, -0x66, 0x66, 0x66, 0x3c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x7e, 0xdb, 0xdb, 0xdb, 0x7e, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x03, 0x06, 0x7e, 0xdb, 0xdb, 0xf3, 0x7e, 0x60, 0xc0, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1c, 0x30, 0x60, 0x60, 0x7c, 0x60, -0x60, 0x60, 0x30, 0x1c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7c, -0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0xc6, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0xfe, 0x00, 0x00, 0xfe, 0x00, 0x00, 0xfe, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x7e, 0x18, -0x18, 0x00, 0x00, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, -0x18, 0x0c, 0x06, 0x0c, 0x18, 0x30, 0x00, 0x7e, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x0c, 0x18, 0x30, 0x60, 0x30, 0x18, 0x0c, 0x00, 0x7e, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0e, 0x1b, 0x1b, 0x1b, 0x18, 0x18, -0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, -0x18, 0x18, 0x18, 0x18, 0xd8, 0xd8, 0xd8, 0x70, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x00, 0x7e, 0x00, 0x18, 0x18, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x76, 0xdc, 0x00, -0x76, 0xdc, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x6c, 0x6c, -0x38, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0f, 0x0c, 0x0c, -0x0c, 0x0c, 0x0c, 0xec, 0x6c, 0x6c, 0x3c, 0x1c, 0x00, 0x00, 0x00, 0x00, -0x00, 0xd8, 0x6c, 0x6c, 0x6c, 0x6c, 0x6c, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0xd8, 0x30, 0x60, 0xc8, 0xf8, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x7c, 0x7c, 0x7c, 0x7c, 0x7c, 0x7c, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, -}; diff --git a/arch/ppc64/kernel/cpu_setup_power4.S b/arch/ppc64/kernel/cpu_setup_power4.S deleted file mode 100644 index 1fb673c511ff..000000000000 --- a/arch/ppc64/kernel/cpu_setup_power4.S +++ /dev/null @@ -1,233 +0,0 @@ -/* - * This file contains low level CPU setup functions. - * Copyright (C) 2003 Benjamin Herrenschmidt (benh@kernel.crashing.org) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - */ - -#include <linux/config.h> -#include <asm/processor.h> -#include <asm/page.h> -#include <asm/cputable.h> -#include <asm/ppc_asm.h> -#include <asm/asm-offsets.h> -#include <asm/cache.h> - -_GLOBAL(__970_cpu_preinit) - /* - * Do nothing if not running in HV mode - */ - mfmsr r0 - rldicl. r0,r0,4,63 - beqlr - - /* - * Deal only with PPC970 and PPC970FX. - */ - mfspr r0,SPRN_PVR - srwi r0,r0,16 - cmpwi r0,0x39 - beq 1f - cmpwi r0,0x3c - beq 1f - cmpwi r0,0x44 - bnelr -1: - - /* Make sure HID4:rm_ci is off before MMU is turned off, that large - * pages are enabled with HID4:61 and clear HID5:DCBZ_size and - * HID5:DCBZ32_ill - */ - li r0,0 - mfspr r3,SPRN_HID4 - rldimi r3,r0,40,23 /* clear bit 23 (rm_ci) */ - rldimi r3,r0,2,61 /* clear bit 61 (lg_pg_en) */ - sync - mtspr SPRN_HID4,r3 - isync - sync - mfspr r3,SPRN_HID5 - rldimi r3,r0,6,56 /* clear bits 56 & 57 (DCBZ*) */ - sync - mtspr SPRN_HID5,r3 - isync - sync - - /* Setup some basic HID1 features */ - mfspr r0,SPRN_HID1 - li r3,0x1200 /* enable i-fetch cacheability */ - sldi r3,r3,44 /* and prefetch */ - or r0,r0,r3 - mtspr SPRN_HID1,r0 - mtspr SPRN_HID1,r0 - isync - - /* Clear HIOR */ - li r0,0 - sync - mtspr SPRN_HIOR,0 /* Clear interrupt prefix */ - isync - blr - -_GLOBAL(__setup_cpu_power4) - blr - -_GLOBAL(__setup_cpu_be) - /* Set large page sizes LP=0: 16MB, LP=1: 64KB */ - addi r3, 0, 0 - ori r3, r3, HID6_LB - sldi r3, r3, 32 - nor r3, r3, r3 - mfspr r4, SPRN_HID6 - and r4, r4, r3 - addi r3, 0, 0x02000 - sldi r3, r3, 32 - or r4, r4, r3 - mtspr SPRN_HID6, r4 - blr - -_GLOBAL(__setup_cpu_ppc970) - mfspr r0,SPRN_HID0 - li r11,5 /* clear DOZE and SLEEP */ - rldimi r0,r11,52,8 /* set NAP and DPM */ - mtspr SPRN_HID0,r0 - mfspr r0,SPRN_HID0 - mfspr r0,SPRN_HID0 - mfspr r0,SPRN_HID0 - mfspr r0,SPRN_HID0 - mfspr r0,SPRN_HID0 - mfspr r0,SPRN_HID0 - sync - isync - blr - -/* Definitions for the table use to save CPU states */ -#define CS_HID0 0 -#define CS_HID1 8 -#define CS_HID4 16 -#define CS_HID5 24 -#define CS_SIZE 32 - - .data - .balign L1_CACHE_BYTES,0 -cpu_state_storage: - .space CS_SIZE - .balign L1_CACHE_BYTES,0 - .text - -/* Called in normal context to backup CPU 0 state. This - * does not include cache settings. This function is also - * called for machine sleep. This does not include the MMU - * setup, BATs, etc... but rather the "special" registers - * like HID0, HID1, HID4, etc... - */ -_GLOBAL(__save_cpu_setup) - /* Some CR fields are volatile, we back it up all */ - mfcr r7 - - /* Get storage ptr */ - LOADADDR(r5,cpu_state_storage) - - /* We only deal with 970 for now */ - mfspr r0,SPRN_PVR - srwi r0,r0,16 - cmpwi r0,0x39 - beq 1f - cmpwi r0,0x3c - beq 1f - cmpwi r0,0x44 - bne 2f - -1: /* Save HID0,1,4 and 5 */ - mfspr r3,SPRN_HID0 - std r3,CS_HID0(r5) - mfspr r3,SPRN_HID1 - std r3,CS_HID1(r5) - mfspr r3,SPRN_HID4 - std r3,CS_HID4(r5) - mfspr r3,SPRN_HID5 - std r3,CS_HID5(r5) - -2: - mtcr r7 - blr - -/* Called with no MMU context (typically MSR:IR/DR off) to - * restore CPU state as backed up by the previous - * function. This does not include cache setting - */ -_GLOBAL(__restore_cpu_setup) - /* Get storage ptr (FIXME when using anton reloc as we - * are running with translation disabled here - */ - LOADADDR(r5,cpu_state_storage) - - /* We only deal with 970 for now */ - mfspr r0,SPRN_PVR - srwi r0,r0,16 - cmpwi r0,0x39 - beq 1f - cmpwi r0,0x3c - beq 1f - cmpwi r0,0x44 - bnelr - -1: /* Before accessing memory, we make sure rm_ci is clear */ - li r0,0 - mfspr r3,SPRN_HID4 - rldimi r3,r0,40,23 /* clear bit 23 (rm_ci) */ - sync - mtspr SPRN_HID4,r3 - isync - sync - - /* Clear interrupt prefix */ - li r0,0 - sync - mtspr SPRN_HIOR,0 - isync - - /* Restore HID0 */ - ld r3,CS_HID0(r5) - sync - isync - mtspr SPRN_HID0,r3 - mfspr r3,SPRN_HID0 - mfspr r3,SPRN_HID0 - mfspr r3,SPRN_HID0 - mfspr r3,SPRN_HID0 - mfspr r3,SPRN_HID0 - mfspr r3,SPRN_HID0 - sync - isync - - /* Restore HID1 */ - ld r3,CS_HID1(r5) - sync - isync - mtspr SPRN_HID1,r3 - mtspr SPRN_HID1,r3 - sync - isync - - /* Restore HID4 */ - ld r3,CS_HID4(r5) - sync - isync - mtspr SPRN_HID4,r3 - sync - isync - - /* Restore HID5 */ - ld r3,CS_HID5(r5) - sync - isync - mtspr SPRN_HID5,r3 - sync - isync - blr - diff --git a/arch/ppc64/kernel/dma.c b/arch/ppc64/kernel/dma.c deleted file mode 100644 index 7c3419656ccc..000000000000 --- a/arch/ppc64/kernel/dma.c +++ /dev/null @@ -1,151 +0,0 @@ -/* - * Copyright (C) 2004 IBM Corporation - * - * Implements the generic device dma API for ppc64. Handles - * the pci and vio busses - */ - -#include <linux/device.h> -#include <linux/dma-mapping.h> -/* Include the busses we support */ -#include <linux/pci.h> -#include <asm/vio.h> -#include <asm/scatterlist.h> -#include <asm/bug.h> - -static struct dma_mapping_ops *get_dma_ops(struct device *dev) -{ -#ifdef CONFIG_PCI - if (dev->bus == &pci_bus_type) - return &pci_dma_ops; -#endif -#ifdef CONFIG_IBMVIO - if (dev->bus == &vio_bus_type) - return &vio_dma_ops; -#endif - return NULL; -} - -int dma_supported(struct device *dev, u64 mask) -{ - struct dma_mapping_ops *dma_ops = get_dma_ops(dev); - - if (dma_ops) - return dma_ops->dma_supported(dev, mask); - BUG(); - return 0; -} -EXPORT_SYMBOL(dma_supported); - -int dma_set_mask(struct device *dev, u64 dma_mask) -{ -#ifdef CONFIG_PCI - if (dev->bus == &pci_bus_type) - return pci_set_dma_mask(to_pci_dev(dev), dma_mask); -#endif -#ifdef CONFIG_IBMVIO - if (dev->bus == &vio_bus_type) - return -EIO; -#endif /* CONFIG_IBMVIO */ - BUG(); - return 0; -} -EXPORT_SYMBOL(dma_set_mask); - -void *dma_alloc_coherent(struct device *dev, size_t size, - dma_addr_t *dma_handle, gfp_t flag) -{ - struct dma_mapping_ops *dma_ops = get_dma_ops(dev); - - if (dma_ops) - return dma_ops->alloc_coherent(dev, size, dma_handle, flag); - BUG(); - return NULL; -} -EXPORT_SYMBOL(dma_alloc_coherent); - -void dma_free_coherent(struct device *dev, size_t size, void *cpu_addr, - dma_addr_t dma_handle) -{ - struct dma_mapping_ops *dma_ops = get_dma_ops(dev); - - if (dma_ops) - dma_ops->free_coherent(dev, size, cpu_addr, dma_handle); - else - BUG(); -} -EXPORT_SYMBOL(dma_free_coherent); - -dma_addr_t dma_map_single(struct device *dev, void *cpu_addr, size_t size, - enum dma_data_direction direction) -{ - struct dma_mapping_ops *dma_ops = get_dma_ops(dev); - - if (dma_ops) - return dma_ops->map_single(dev, cpu_addr, size, direction); - BUG(); - return (dma_addr_t)0; -} -EXPORT_SYMBOL(dma_map_single); - -void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size, - enum dma_data_direction direction) -{ - struct dma_mapping_ops *dma_ops = get_dma_ops(dev); - - if (dma_ops) - dma_ops->unmap_single(dev, dma_addr, size, direction); - else - BUG(); -} -EXPORT_SYMBOL(dma_unmap_single); - -dma_addr_t dma_map_page(struct device *dev, struct page *page, - unsigned long offset, size_t size, - enum dma_data_direction direction) -{ - struct dma_mapping_ops *dma_ops = get_dma_ops(dev); - - if (dma_ops) - return dma_ops->map_single(dev, - (page_address(page) + offset), size, direction); - BUG(); - return (dma_addr_t)0; -} -EXPORT_SYMBOL(dma_map_page); - -void dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size, - enum dma_data_direction direction) -{ - struct dma_mapping_ops *dma_ops = get_dma_ops(dev); - - if (dma_ops) - dma_ops->unmap_single(dev, dma_address, size, direction); - else - BUG(); -} -EXPORT_SYMBOL(dma_unmap_page); - -int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents, - enum dma_data_direction direction) -{ - struct dma_mapping_ops *dma_ops = get_dma_ops(dev); - - if (dma_ops) - return dma_ops->map_sg(dev, sg, nents, direction); - BUG(); - return 0; -} -EXPORT_SYMBOL(dma_map_sg); - -void dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries, - enum dma_data_direction direction) -{ - struct dma_mapping_ops *dma_ops = get_dma_ops(dev); - - if (dma_ops) - dma_ops->unmap_sg(dev, sg, nhwentries, direction); - else - BUG(); -} -EXPORT_SYMBOL(dma_unmap_sg); diff --git a/arch/ppc64/kernel/eeh.c b/arch/ppc64/kernel/eeh.c deleted file mode 100644 index 035d1b14a207..000000000000 --- a/arch/ppc64/kernel/eeh.c +++ /dev/null @@ -1,943 +0,0 @@ -/* - * eeh.c - * Copyright (C) 2001 Dave Engebretsen & Todd Inglett IBM Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/bootmem.h> -#include <linux/init.h> -#include <linux/list.h> -#include <linux/mm.h> -#include <linux/notifier.h> -#include <linux/pci.h> -#include <linux/proc_fs.h> -#include <linux/rbtree.h> -#include <linux/seq_file.h> -#include <linux/spinlock.h> -#include <asm/eeh.h> -#include <asm/io.h> -#include <asm/machdep.h> -#include <asm/rtas.h> -#include <asm/atomic.h> -#include <asm/systemcfg.h> -#include <asm/ppc-pci.h> - -#undef DEBUG - -/** Overview: - * EEH, or "Extended Error Handling" is a PCI bridge technology for - * dealing with PCI bus errors that can't be dealt with within the - * usual PCI framework, except by check-stopping the CPU. Systems - * that are designed for high-availability/reliability cannot afford - * to crash due to a "mere" PCI error, thus the need for EEH. - * An EEH-capable bridge operates by converting a detected error - * into a "slot freeze", taking the PCI adapter off-line, making - * the slot behave, from the OS'es point of view, as if the slot - * were "empty": all reads return 0xff's and all writes are silently - * ignored. EEH slot isolation events can be triggered by parity - * errors on the address or data busses (e.g. during posted writes), - * which in turn might be caused by dust, vibration, humidity, - * radioactivity or plain-old failed hardware. - * - * Note, however, that one of the leading causes of EEH slot - * freeze events are buggy device drivers, buggy device microcode, - * or buggy device hardware. This is because any attempt by the - * device to bus-master data to a memory address that is not - * assigned to the device will trigger a slot freeze. (The idea - * is to prevent devices-gone-wild from corrupting system memory). - * Buggy hardware/drivers will have a miserable time co-existing - * with EEH. - * - * Ideally, a PCI device driver, when suspecting that an isolation - * event has occured (e.g. by reading 0xff's), will then ask EEH - * whether this is the case, and then take appropriate steps to - * reset the PCI slot, the PCI device, and then resume operations. - * However, until that day, the checking is done here, with the - * eeh_check_failure() routine embedded in the MMIO macros. If - * the slot is found to be isolated, an "EEH Event" is synthesized - * and sent out for processing. - */ - -/** Bus Unit ID macros; get low and hi 32-bits of the 64-bit BUID */ -#define BUID_HI(buid) ((buid) >> 32) -#define BUID_LO(buid) ((buid) & 0xffffffff) - -/* EEH event workqueue setup. */ -static DEFINE_SPINLOCK(eeh_eventlist_lock); -LIST_HEAD(eeh_eventlist); -static void eeh_event_handler(void *); -DECLARE_WORK(eeh_event_wq, eeh_event_handler, NULL); - -static struct notifier_block *eeh_notifier_chain; - -/* - * If a device driver keeps reading an MMIO register in an interrupt - * handler after a slot isolation event has occurred, we assume it - * is broken and panic. This sets the threshold for how many read - * attempts we allow before panicking. - */ -#define EEH_MAX_FAILS 1000 -static atomic_t eeh_fail_count; - -/* RTAS tokens */ -static int ibm_set_eeh_option; -static int ibm_set_slot_reset; -static int ibm_read_slot_reset_state; -static int ibm_read_slot_reset_state2; -static int ibm_slot_error_detail; - -static int eeh_subsystem_enabled; - -/* Buffer for reporting slot-error-detail rtas calls */ -static unsigned char slot_errbuf[RTAS_ERROR_LOG_MAX]; -static DEFINE_SPINLOCK(slot_errbuf_lock); -static int eeh_error_buf_size; - -/* System monitoring statistics */ -static DEFINE_PER_CPU(unsigned long, total_mmio_ffs); -static DEFINE_PER_CPU(unsigned long, false_positives); -static DEFINE_PER_CPU(unsigned long, ignored_failures); -static DEFINE_PER_CPU(unsigned long, slot_resets); - -/** - * The pci address cache subsystem. This subsystem places - * PCI device address resources into a red-black tree, sorted - * according to the address range, so that given only an i/o - * address, the corresponding PCI device can be **quickly** - * found. It is safe to perform an address lookup in an interrupt - * context; this ability is an important feature. - * - * Currently, the only customer of this code is the EEH subsystem; - * thus, this code has been somewhat tailored to suit EEH better. - * In particular, the cache does *not* hold the addresses of devices - * for which EEH is not enabled. - * - * (Implementation Note: The RB tree seems to be better/faster - * than any hash algo I could think of for this problem, even - * with the penalty of slow pointer chases for d-cache misses). - */ -struct pci_io_addr_range -{ - struct rb_node rb_node; - unsigned long addr_lo; - unsigned long addr_hi; - struct pci_dev *pcidev; - unsigned int flags; -}; - -static struct pci_io_addr_cache -{ - struct rb_root rb_root; - spinlock_t piar_lock; -} pci_io_addr_cache_root; - -static inline struct pci_dev *__pci_get_device_by_addr(unsigned long addr) -{ - struct rb_node *n = pci_io_addr_cache_root.rb_root.rb_node; - - while (n) { - struct pci_io_addr_range *piar; - piar = rb_entry(n, struct pci_io_addr_range, rb_node); - - if (addr < piar->addr_lo) { - n = n->rb_left; - } else { - if (addr > piar->addr_hi) { - n = n->rb_right; - } else { - pci_dev_get(piar->pcidev); - return piar->pcidev; - } - } - } - - return NULL; -} - -/** - * pci_get_device_by_addr - Get device, given only address - * @addr: mmio (PIO) phys address or i/o port number - * - * Given an mmio phys address, or a port number, find a pci device - * that implements this address. Be sure to pci_dev_put the device - * when finished. I/O port numbers are assumed to be offset - * from zero (that is, they do *not* have pci_io_addr added in). - * It is safe to call this function within an interrupt. - */ -static struct pci_dev *pci_get_device_by_addr(unsigned long addr) -{ - struct pci_dev *dev; - unsigned long flags; - - spin_lock_irqsave(&pci_io_addr_cache_root.piar_lock, flags); - dev = __pci_get_device_by_addr(addr); - spin_unlock_irqrestore(&pci_io_addr_cache_root.piar_lock, flags); - return dev; -} - -#ifdef DEBUG -/* - * Handy-dandy debug print routine, does nothing more - * than print out the contents of our addr cache. - */ -static void pci_addr_cache_print(struct pci_io_addr_cache *cache) -{ - struct rb_node *n; - int cnt = 0; - - n = rb_first(&cache->rb_root); - while (n) { - struct pci_io_addr_range *piar; - piar = rb_entry(n, struct pci_io_addr_range, rb_node); - printk(KERN_DEBUG "PCI: %s addr range %d [%lx-%lx]: %s\n", - (piar->flags & IORESOURCE_IO) ? "i/o" : "mem", cnt, - piar->addr_lo, piar->addr_hi, pci_name(piar->pcidev)); - cnt++; - n = rb_next(n); - } -} -#endif - -/* Insert address range into the rb tree. */ -static struct pci_io_addr_range * -pci_addr_cache_insert(struct pci_dev *dev, unsigned long alo, - unsigned long ahi, unsigned int flags) -{ - struct rb_node **p = &pci_io_addr_cache_root.rb_root.rb_node; - struct rb_node *parent = NULL; - struct pci_io_addr_range *piar; - - /* Walk tree, find a place to insert into tree */ - while (*p) { - parent = *p; - piar = rb_entry(parent, struct pci_io_addr_range, rb_node); - if (alo < piar->addr_lo) { - p = &parent->rb_left; - } else if (ahi > piar->addr_hi) { - p = &parent->rb_right; - } else { - if (dev != piar->pcidev || - alo != piar->addr_lo || ahi != piar->addr_hi) { - printk(KERN_WARNING "PIAR: overlapping address range\n"); - } - return piar; - } - } - piar = (struct pci_io_addr_range *)kmalloc(sizeof(struct pci_io_addr_range), GFP_ATOMIC); - if (!piar) - return NULL; - - piar->addr_lo = alo; - piar->addr_hi = ahi; - piar->pcidev = dev; - piar->flags = flags; - - rb_link_node(&piar->rb_node, parent, p); - rb_insert_color(&piar->rb_node, &pci_io_addr_cache_root.rb_root); - - return piar; -} - -static void __pci_addr_cache_insert_device(struct pci_dev *dev) -{ - struct device_node *dn; - struct pci_dn *pdn; - int i; - int inserted = 0; - - dn = pci_device_to_OF_node(dev); - if (!dn) { - printk(KERN_WARNING "PCI: no pci dn found for dev=%s\n", - pci_name(dev)); - return; - } - - /* Skip any devices for which EEH is not enabled. */ - pdn = dn->data; - if (!(pdn->eeh_mode & EEH_MODE_SUPPORTED) || - pdn->eeh_mode & EEH_MODE_NOCHECK) { -#ifdef DEBUG - printk(KERN_INFO "PCI: skip building address cache for=%s\n", - pci_name(dev)); -#endif - return; - } - - /* The cache holds a reference to the device... */ - pci_dev_get(dev); - - /* Walk resources on this device, poke them into the tree */ - for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) { - unsigned long start = pci_resource_start(dev,i); - unsigned long end = pci_resource_end(dev,i); - unsigned int flags = pci_resource_flags(dev,i); - - /* We are interested only bus addresses, not dma or other stuff */ - if (0 == (flags & (IORESOURCE_IO | IORESOURCE_MEM))) - continue; - if (start == 0 || ~start == 0 || end == 0 || ~end == 0) - continue; - pci_addr_cache_insert(dev, start, end, flags); - inserted = 1; - } - - /* If there was nothing to add, the cache has no reference... */ - if (!inserted) - pci_dev_put(dev); -} - -/** - * pci_addr_cache_insert_device - Add a device to the address cache - * @dev: PCI device whose I/O addresses we are interested in. - * - * In order to support the fast lookup of devices based on addresses, - * we maintain a cache of devices that can be quickly searched. - * This routine adds a device to that cache. - */ -void pci_addr_cache_insert_device(struct pci_dev *dev) -{ - unsigned long flags; - - spin_lock_irqsave(&pci_io_addr_cache_root.piar_lock, flags); - __pci_addr_cache_insert_device(dev); - spin_unlock_irqrestore(&pci_io_addr_cache_root.piar_lock, flags); -} - -static inline void __pci_addr_cache_remove_device(struct pci_dev *dev) -{ - struct rb_node *n; - int removed = 0; - -restart: - n = rb_first(&pci_io_addr_cache_root.rb_root); - while (n) { - struct pci_io_addr_range *piar; - piar = rb_entry(n, struct pci_io_addr_range, rb_node); - - if (piar->pcidev == dev) { - rb_erase(n, &pci_io_addr_cache_root.rb_root); - removed = 1; - kfree(piar); - goto restart; - } - n = rb_next(n); - } - - /* The cache no longer holds its reference to this device... */ - if (removed) - pci_dev_put(dev); -} - -/** - * pci_addr_cache_remove_device - remove pci device from addr cache - * @dev: device to remove - * - * Remove a device from the addr-cache tree. - * This is potentially expensive, since it will walk - * the tree multiple times (once per resource). - * But so what; device removal doesn't need to be that fast. - */ -void pci_addr_cache_remove_device(struct pci_dev *dev) -{ - unsigned long flags; - - spin_lock_irqsave(&pci_io_addr_cache_root.piar_lock, flags); - __pci_addr_cache_remove_device(dev); - spin_unlock_irqrestore(&pci_io_addr_cache_root.piar_lock, flags); -} - -/** - * pci_addr_cache_build - Build a cache of I/O addresses - * - * Build a cache of pci i/o addresses. This cache will be used to - * find the pci device that corresponds to a given address. - * This routine scans all pci busses to build the cache. - * Must be run late in boot process, after the pci controllers - * have been scaned for devices (after all device resources are known). - */ -void __init pci_addr_cache_build(void) -{ - struct pci_dev *dev = NULL; - - spin_lock_init(&pci_io_addr_cache_root.piar_lock); - - while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) { - /* Ignore PCI bridges ( XXX why ??) */ - if ((dev->class >> 16) == PCI_BASE_CLASS_BRIDGE) { - continue; - } - pci_addr_cache_insert_device(dev); - } - -#ifdef DEBUG - /* Verify tree built up above, echo back the list of addrs. */ - pci_addr_cache_print(&pci_io_addr_cache_root); -#endif -} - -/* --------------------------------------------------------------- */ -/* Above lies the PCI Address Cache. Below lies the EEH event infrastructure */ - -/** - * eeh_register_notifier - Register to find out about EEH events. - * @nb: notifier block to callback on events - */ -int eeh_register_notifier(struct notifier_block *nb) -{ - return notifier_chain_register(&eeh_notifier_chain, nb); -} - -/** - * eeh_unregister_notifier - Unregister to an EEH event notifier. - * @nb: notifier block to callback on events - */ -int eeh_unregister_notifier(struct notifier_block *nb) -{ - return notifier_chain_unregister(&eeh_notifier_chain, nb); -} - -/** - * read_slot_reset_state - Read the reset state of a device node's slot - * @dn: device node to read - * @rets: array to return results in - */ -static int read_slot_reset_state(struct device_node *dn, int rets[]) -{ - int token, outputs; - struct pci_dn *pdn = dn->data; - - if (ibm_read_slot_reset_state2 != RTAS_UNKNOWN_SERVICE) { - token = ibm_read_slot_reset_state2; - outputs = 4; - } else { - token = ibm_read_slot_reset_state; - outputs = 3; - } - - return rtas_call(token, 3, outputs, rets, pdn->eeh_config_addr, - BUID_HI(pdn->phb->buid), BUID_LO(pdn->phb->buid)); -} - -/** - * eeh_panic - call panic() for an eeh event that cannot be handled. - * The philosophy of this routine is that it is better to panic and - * halt the OS than it is to risk possible data corruption by - * oblivious device drivers that don't know better. - * - * @dev pci device that had an eeh event - * @reset_state current reset state of the device slot - */ -static void eeh_panic(struct pci_dev *dev, int reset_state) -{ - /* - * XXX We should create a separate sysctl for this. - * - * Since the panic_on_oops sysctl is used to halt the system - * in light of potential corruption, we can use it here. - */ - if (panic_on_oops) - panic("EEH: MMIO failure (%d) on device:%s\n", reset_state, - pci_name(dev)); - else { - __get_cpu_var(ignored_failures)++; - printk(KERN_INFO "EEH: Ignored MMIO failure (%d) on device:%s\n", - reset_state, pci_name(dev)); - } -} - -/** - * eeh_event_handler - dispatch EEH events. The detection of a frozen - * slot can occur inside an interrupt, where it can be hard to do - * anything about it. The goal of this routine is to pull these - * detection events out of the context of the interrupt handler, and - * re-dispatch them for processing at a later time in a normal context. - * - * @dummy - unused - */ -static void eeh_event_handler(void *dummy) -{ - unsigned long flags; - struct eeh_event *event; - - while (1) { - spin_lock_irqsave(&eeh_eventlist_lock, flags); - event = NULL; - if (!list_empty(&eeh_eventlist)) { - event = list_entry(eeh_eventlist.next, struct eeh_event, list); - list_del(&event->list); - } - spin_unlock_irqrestore(&eeh_eventlist_lock, flags); - if (event == NULL) - break; - - printk(KERN_INFO "EEH: MMIO failure (%d), notifiying device " - "%s\n", event->reset_state, - pci_name(event->dev)); - - atomic_set(&eeh_fail_count, 0); - notifier_call_chain (&eeh_notifier_chain, - EEH_NOTIFY_FREEZE, event); - - __get_cpu_var(slot_resets)++; - - pci_dev_put(event->dev); - kfree(event); - } -} - -/** - * eeh_token_to_phys - convert EEH address token to phys address - * @token i/o token, should be address in the form 0xE.... - */ -static inline unsigned long eeh_token_to_phys(unsigned long token) -{ - pte_t *ptep; - unsigned long pa; - - ptep = find_linux_pte(init_mm.pgd, token); - if (!ptep) - return token; - pa = pte_pfn(*ptep) << PAGE_SHIFT; - - return pa | (token & (PAGE_SIZE-1)); -} - -/** - * eeh_dn_check_failure - check if all 1's data is due to EEH slot freeze - * @dn device node - * @dev pci device, if known - * - * Check for an EEH failure for the given device node. Call this - * routine if the result of a read was all 0xff's and you want to - * find out if this is due to an EEH slot freeze. This routine - * will query firmware for the EEH status. - * - * Returns 0 if there has not been an EEH error; otherwise returns - * a non-zero value and queues up a solt isolation event notification. - * - * It is safe to call this routine in an interrupt context. - */ -int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev) -{ - int ret; - int rets[3]; - unsigned long flags; - int rc, reset_state; - struct eeh_event *event; - struct pci_dn *pdn; - - __get_cpu_var(total_mmio_ffs)++; - - if (!eeh_subsystem_enabled) - return 0; - - if (!dn) - return 0; - pdn = dn->data; - - /* Access to IO BARs might get this far and still not want checking. */ - if (!pdn->eeh_capable || !(pdn->eeh_mode & EEH_MODE_SUPPORTED) || - pdn->eeh_mode & EEH_MODE_NOCHECK) { - return 0; - } - - if (!pdn->eeh_config_addr) { - return 0; - } - - /* - * If we already have a pending isolation event for this - * slot, we know it's bad already, we don't need to check... - */ - if (pdn->eeh_mode & EEH_MODE_ISOLATED) { - atomic_inc(&eeh_fail_count); - if (atomic_read(&eeh_fail_count) >= EEH_MAX_FAILS) { - /* re-read the slot reset state */ - if (read_slot_reset_state(dn, rets) != 0) - rets[0] = -1; /* reset state unknown */ - eeh_panic(dev, rets[0]); - } - return 0; - } - - /* - * Now test for an EEH failure. This is VERY expensive. - * Note that the eeh_config_addr may be a parent device - * in the case of a device behind a bridge, or it may be - * function zero of a multi-function device. - * In any case they must share a common PHB. - */ - ret = read_slot_reset_state(dn, rets); - if (!(ret == 0 && rets[1] == 1 && (rets[0] == 2 || rets[0] == 4))) { - __get_cpu_var(false_positives)++; - return 0; - } - - /* prevent repeated reports of this failure */ - pdn->eeh_mode |= EEH_MODE_ISOLATED; - - reset_state = rets[0]; - - spin_lock_irqsave(&slot_errbuf_lock, flags); - memset(slot_errbuf, 0, eeh_error_buf_size); - - rc = rtas_call(ibm_slot_error_detail, - 8, 1, NULL, pdn->eeh_config_addr, - BUID_HI(pdn->phb->buid), - BUID_LO(pdn->phb->buid), NULL, 0, - virt_to_phys(slot_errbuf), - eeh_error_buf_size, - 1 /* Temporary Error */); - - if (rc == 0) - log_error(slot_errbuf, ERR_TYPE_RTAS_LOG, 0); - spin_unlock_irqrestore(&slot_errbuf_lock, flags); - - printk(KERN_INFO "EEH: MMIO failure (%d) on device: %s %s\n", - rets[0], dn->name, dn->full_name); - event = kmalloc(sizeof(*event), GFP_ATOMIC); - if (event == NULL) { - eeh_panic(dev, reset_state); - return 1; - } - - event->dev = dev; - event->dn = dn; - event->reset_state = reset_state; - - /* We may or may not be called in an interrupt context */ - spin_lock_irqsave(&eeh_eventlist_lock, flags); - list_add(&event->list, &eeh_eventlist); - spin_unlock_irqrestore(&eeh_eventlist_lock, flags); - - /* Most EEH events are due to device driver bugs. Having - * a stack trace will help the device-driver authors figure - * out what happened. So print that out. */ - dump_stack(); - schedule_work(&eeh_event_wq); - - return 0; -} - -EXPORT_SYMBOL(eeh_dn_check_failure); - -/** - * eeh_check_failure - check if all 1's data is due to EEH slot freeze - * @token i/o token, should be address in the form 0xA.... - * @val value, should be all 1's (XXX why do we need this arg??) - * - * Check for an eeh failure at the given token address. - * Check for an EEH failure at the given token address. Call this - * routine if the result of a read was all 0xff's and you want to - * find out if this is due to an EEH slot freeze event. This routine - * will query firmware for the EEH status. - * - * Note this routine is safe to call in an interrupt context. - */ -unsigned long eeh_check_failure(const volatile void __iomem *token, unsigned long val) -{ - unsigned long addr; - struct pci_dev *dev; - struct device_node *dn; - - /* Finding the phys addr + pci device; this is pretty quick. */ - addr = eeh_token_to_phys((unsigned long __force) token); - dev = pci_get_device_by_addr(addr); - if (!dev) - return val; - - dn = pci_device_to_OF_node(dev); - eeh_dn_check_failure (dn, dev); - - pci_dev_put(dev); - return val; -} - -EXPORT_SYMBOL(eeh_check_failure); - -struct eeh_early_enable_info { - unsigned int buid_hi; - unsigned int buid_lo; -}; - -/* Enable eeh for the given device node. */ -static void *early_enable_eeh(struct device_node *dn, void *data) -{ - struct eeh_early_enable_info *info = data; - int ret; - char *status = get_property(dn, "status", NULL); - u32 *class_code = (u32 *)get_property(dn, "class-code", NULL); - u32 *vendor_id = (u32 *)get_property(dn, "vendor-id", NULL); - u32 *device_id = (u32 *)get_property(dn, "device-id", NULL); - u32 *regs; - int enable; - struct pci_dn *pdn = dn->data; - - pdn->eeh_mode = 0; - - if (status && strcmp(status, "ok") != 0) - return NULL; /* ignore devices with bad status */ - - /* Ignore bad nodes. */ - if (!class_code || !vendor_id || !device_id) - return NULL; - - /* There is nothing to check on PCI to ISA bridges */ - if (dn->type && !strcmp(dn->type, "isa")) { - pdn->eeh_mode |= EEH_MODE_NOCHECK; - return NULL; - } - - /* - * Now decide if we are going to "Disable" EEH checking - * for this device. We still run with the EEH hardware active, - * but we won't be checking for ff's. This means a driver - * could return bad data (very bad!), an interrupt handler could - * hang waiting on status bits that won't change, etc. - * But there are a few cases like display devices that make sense. - */ - enable = 1; /* i.e. we will do checking */ - if ((*class_code >> 16) == PCI_BASE_CLASS_DISPLAY) - enable = 0; - - if (!enable) - pdn->eeh_mode |= EEH_MODE_NOCHECK; - - /* Ok... see if this device supports EEH. Some do, some don't, - * and the only way to find out is to check each and every one. */ - regs = (u32 *)get_property(dn, "reg", NULL); - if (regs) { - /* First register entry is addr (00BBSS00) */ - /* Try to enable eeh */ - ret = rtas_call(ibm_set_eeh_option, 4, 1, NULL, - regs[0], info->buid_hi, info->buid_lo, - EEH_ENABLE); - if (ret == 0) { - eeh_subsystem_enabled = 1; - pdn->eeh_mode |= EEH_MODE_SUPPORTED; - pdn->eeh_config_addr = regs[0]; -#ifdef DEBUG - printk(KERN_DEBUG "EEH: %s: eeh enabled\n", dn->full_name); -#endif - } else { - - /* This device doesn't support EEH, but it may have an - * EEH parent, in which case we mark it as supported. */ - if (dn->parent && dn->parent->data - && (PCI_DN(dn->parent)->eeh_mode & EEH_MODE_SUPPORTED)) { - /* Parent supports EEH. */ - pdn->eeh_mode |= EEH_MODE_SUPPORTED; - pdn->eeh_config_addr = PCI_DN(dn->parent)->eeh_config_addr; - return NULL; - } - } - } else { - printk(KERN_WARNING "EEH: %s: unable to get reg property.\n", - dn->full_name); - } - - return NULL; -} - -/* - * Initialize EEH by trying to enable it for all of the adapters in the system. - * As a side effect we can determine here if eeh is supported at all. - * Note that we leave EEH on so failed config cycles won't cause a machine - * check. If a user turns off EEH for a particular adapter they are really - * telling Linux to ignore errors. Some hardware (e.g. POWER5) won't - * grant access to a slot if EEH isn't enabled, and so we always enable - * EEH for all slots/all devices. - * - * The eeh-force-off option disables EEH checking globally, for all slots. - * Even if force-off is set, the EEH hardware is still enabled, so that - * newer systems can boot. - */ -void __init eeh_init(void) -{ - struct device_node *phb, *np; - struct eeh_early_enable_info info; - - np = of_find_node_by_path("/rtas"); - if (np == NULL) - return; - - ibm_set_eeh_option = rtas_token("ibm,set-eeh-option"); - ibm_set_slot_reset = rtas_token("ibm,set-slot-reset"); - ibm_read_slot_reset_state2 = rtas_token("ibm,read-slot-reset-state2"); - ibm_read_slot_reset_state = rtas_token("ibm,read-slot-reset-state"); - ibm_slot_error_detail = rtas_token("ibm,slot-error-detail"); - - if (ibm_set_eeh_option == RTAS_UNKNOWN_SERVICE) - return; - - eeh_error_buf_size = rtas_token("rtas-error-log-max"); - if (eeh_error_buf_size == RTAS_UNKNOWN_SERVICE) { - eeh_error_buf_size = 1024; - } - if (eeh_error_buf_size > RTAS_ERROR_LOG_MAX) { - printk(KERN_WARNING "EEH: rtas-error-log-max is bigger than allocated " - "buffer ! (%d vs %d)", eeh_error_buf_size, RTAS_ERROR_LOG_MAX); - eeh_error_buf_size = RTAS_ERROR_LOG_MAX; - } - - /* Enable EEH for all adapters. Note that eeh requires buid's */ - for (phb = of_find_node_by_name(NULL, "pci"); phb; - phb = of_find_node_by_name(phb, "pci")) { - unsigned long buid; - struct pci_dn *pci; - - buid = get_phb_buid(phb); - if (buid == 0 || phb->data == NULL) - continue; - - pci = phb->data; - info.buid_lo = BUID_LO(buid); - info.buid_hi = BUID_HI(buid); - traverse_pci_devices(phb, early_enable_eeh, &info); - } - - if (eeh_subsystem_enabled) - printk(KERN_INFO "EEH: PCI Enhanced I/O Error Handling Enabled\n"); - else - printk(KERN_WARNING "EEH: No capable adapters found\n"); -} - -/** - * eeh_add_device_early - enable EEH for the indicated device_node - * @dn: device node for which to set up EEH - * - * This routine must be used to perform EEH initialization for PCI - * devices that were added after system boot (e.g. hotplug, dlpar). - * This routine must be called before any i/o is performed to the - * adapter (inluding any config-space i/o). - * Whether this actually enables EEH or not for this device depends - * on the CEC architecture, type of the device, on earlier boot - * command-line arguments & etc. - */ -void eeh_add_device_early(struct device_node *dn) -{ - struct pci_controller *phb; - struct eeh_early_enable_info info; - - if (!dn || !dn->data) - return; - phb = PCI_DN(dn)->phb; - if (NULL == phb || 0 == phb->buid) { - printk(KERN_WARNING "EEH: Expected buid but found none\n"); - return; - } - - info.buid_hi = BUID_HI(phb->buid); - info.buid_lo = BUID_LO(phb->buid); - early_enable_eeh(dn, &info); -} -EXPORT_SYMBOL(eeh_add_device_early); - -/** - * eeh_add_device_late - perform EEH initialization for the indicated pci device - * @dev: pci device for which to set up EEH - * - * This routine must be used to complete EEH initialization for PCI - * devices that were added after system boot (e.g. hotplug, dlpar). - */ -void eeh_add_device_late(struct pci_dev *dev) -{ - if (!dev || !eeh_subsystem_enabled) - return; - -#ifdef DEBUG - printk(KERN_DEBUG "EEH: adding device %s\n", pci_name(dev)); -#endif - - pci_addr_cache_insert_device (dev); -} -EXPORT_SYMBOL(eeh_add_device_late); - -/** - * eeh_remove_device - undo EEH setup for the indicated pci device - * @dev: pci device to be removed - * - * This routine should be when a device is removed from a running - * system (e.g. by hotplug or dlpar). - */ -void eeh_remove_device(struct pci_dev *dev) -{ - if (!dev || !eeh_subsystem_enabled) - return; - - /* Unregister the device with the EEH/PCI address search system */ -#ifdef DEBUG - printk(KERN_DEBUG "EEH: remove device %s\n", pci_name(dev)); -#endif - pci_addr_cache_remove_device(dev); -} -EXPORT_SYMBOL(eeh_remove_device); - -static int proc_eeh_show(struct seq_file *m, void *v) -{ - unsigned int cpu; - unsigned long ffs = 0, positives = 0, failures = 0; - unsigned long resets = 0; - - for_each_cpu(cpu) { - ffs += per_cpu(total_mmio_ffs, cpu); - positives += per_cpu(false_positives, cpu); - failures += per_cpu(ignored_failures, cpu); - resets += per_cpu(slot_resets, cpu); - } - - if (0 == eeh_subsystem_enabled) { - seq_printf(m, "EEH Subsystem is globally disabled\n"); - seq_printf(m, "eeh_total_mmio_ffs=%ld\n", ffs); - } else { - seq_printf(m, "EEH Subsystem is enabled\n"); - seq_printf(m, "eeh_total_mmio_ffs=%ld\n" - "eeh_false_positives=%ld\n" - "eeh_ignored_failures=%ld\n" - "eeh_slot_resets=%ld\n" - "eeh_fail_count=%d\n", - ffs, positives, failures, resets, - eeh_fail_count.counter); - } - - return 0; -} - -static int proc_eeh_open(struct inode *inode, struct file *file) -{ - return single_open(file, proc_eeh_show, NULL); -} - -static struct file_operations proc_eeh_operations = { - .open = proc_eeh_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - -static int __init eeh_init_proc(void) -{ - struct proc_dir_entry *e; - - if (systemcfg->platform & PLATFORM_PSERIES) { - e = create_proc_entry("ppc64/eeh", 0, NULL); - if (e) - e->proc_fops = &proc_eeh_operations; - } - - return 0; -} -__initcall(eeh_init_proc); diff --git a/arch/ppc64/kernel/firmware.c b/arch/ppc64/kernel/firmware.c deleted file mode 100644 index d8432c0fb27d..000000000000 --- a/arch/ppc64/kernel/firmware.c +++ /dev/null @@ -1,47 +0,0 @@ -/* - * arch/ppc64/kernel/firmware.c - * - * Extracted from cputable.c - * - * Copyright (C) 2001 Ben. Herrenschmidt (benh@kernel.crashing.org) - * - * Modifications for ppc64: - * Copyright (C) 2003 Dave Engebretsen <engebret@us.ibm.com> - * Copyright (C) 2005 Stephen Rothwell, IBM Corporation - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include <linux/config.h> - -#include <asm/firmware.h> - -unsigned long ppc64_firmware_features; - -#ifdef CONFIG_PPC_PSERIES -firmware_feature_t firmware_features_table[FIRMWARE_MAX_FEATURES] = { - {FW_FEATURE_PFT, "hcall-pft"}, - {FW_FEATURE_TCE, "hcall-tce"}, - {FW_FEATURE_SPRG0, "hcall-sprg0"}, - {FW_FEATURE_DABR, "hcall-dabr"}, - {FW_FEATURE_COPY, "hcall-copy"}, - {FW_FEATURE_ASR, "hcall-asr"}, - {FW_FEATURE_DEBUG, "hcall-debug"}, - {FW_FEATURE_PERF, "hcall-perf"}, - {FW_FEATURE_DUMP, "hcall-dump"}, - {FW_FEATURE_INTERRUPT, "hcall-interrupt"}, - {FW_FEATURE_MIGRATE, "hcall-migrate"}, - {FW_FEATURE_PERFMON, "hcall-perfmon"}, - {FW_FEATURE_CRQ, "hcall-crq"}, - {FW_FEATURE_VIO, "hcall-vio"}, - {FW_FEATURE_RDMA, "hcall-rdma"}, - {FW_FEATURE_LLAN, "hcall-lLAN"}, - {FW_FEATURE_BULK, "hcall-bulk"}, - {FW_FEATURE_XDABR, "hcall-xdabr"}, - {FW_FEATURE_MULTITCE, "hcall-multi-tce"}, - {FW_FEATURE_SPLPAR, "hcall-splpar"}, -}; -#endif diff --git a/arch/ppc64/kernel/head.S b/arch/ppc64/kernel/head.S deleted file mode 100644 index 9e8050ea1225..000000000000 --- a/arch/ppc64/kernel/head.S +++ /dev/null @@ -1,2085 +0,0 @@ -/* - * arch/ppc64/kernel/head.S - * - * PowerPC version - * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) - * - * Rewritten by Cort Dougan (cort@cs.nmt.edu) for PReP - * Copyright (C) 1996 Cort Dougan <cort@cs.nmt.edu> - * Adapted for Power Macintosh by Paul Mackerras. - * Low-level exception handlers and MMU support - * rewritten by Paul Mackerras. - * Copyright (C) 1996 Paul Mackerras. - * - * Adapted for 64bit PowerPC by Dave Engebretsen, Peter Bergner, and - * Mike Corrigan {engebret|bergner|mikejc}@us.ibm.com - * - * This file contains the low-level support and setup for the - * PowerPC-64 platform, including trap and interrupt dispatch. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include <linux/config.h> -#include <linux/threads.h> -#include <asm/processor.h> -#include <asm/page.h> -#include <asm/mmu.h> -#include <asm/systemcfg.h> -#include <asm/ppc_asm.h> -#include <asm/asm-offsets.h> -#include <asm/bug.h> -#include <asm/cputable.h> -#include <asm/setup.h> -#include <asm/hvcall.h> -#include <asm/iseries/lpar_map.h> -#include <asm/thread_info.h> - -#ifdef CONFIG_PPC_ISERIES -#define DO_SOFT_DISABLE -#endif - -/* - * We layout physical memory as follows: - * 0x0000 - 0x00ff : Secondary processor spin code - * 0x0100 - 0x2fff : pSeries Interrupt prologs - * 0x3000 - 0x5fff : interrupt support, iSeries and common interrupt prologs - * 0x6000 - 0x6fff : Initial (CPU0) segment table - * 0x7000 - 0x7fff : FWNMI data area - * 0x8000 - : Early init and support code - */ - -/* - * SPRG Usage - * - * Register Definition - * - * SPRG0 reserved for hypervisor - * SPRG1 temp - used to save gpr - * SPRG2 temp - used to save gpr - * SPRG3 virt addr of paca - */ - -/* - * Entering into this code we make the following assumptions: - * For pSeries: - * 1. The MMU is off & open firmware is running in real mode. - * 2. The kernel is entered at __start - * - * For iSeries: - * 1. The MMU is on (as it always is for iSeries) - * 2. The kernel is entered at system_reset_iSeries - */ - - .text - .globl _stext -_stext: -#ifdef CONFIG_PPC_MULTIPLATFORM -_GLOBAL(__start) - /* NOP this out unconditionally */ -BEGIN_FTR_SECTION - b .__start_initialization_multiplatform -END_FTR_SECTION(0, 1) -#endif /* CONFIG_PPC_MULTIPLATFORM */ - - /* Catch branch to 0 in real mode */ - trap - -#ifdef CONFIG_PPC_ISERIES - /* - * At offset 0x20, there is a pointer to iSeries LPAR data. - * This is required by the hypervisor - */ - . = 0x20 - .llong hvReleaseData-KERNELBASE - - /* - * At offset 0x28 and 0x30 are offsets to the mschunks_map - * array (used by the iSeries LPAR debugger to do translation - * between physical addresses and absolute addresses) and - * to the pidhash table (also used by the debugger) - */ - .llong mschunks_map-KERNELBASE - .llong 0 /* pidhash-KERNELBASE SFRXXX */ - - /* Offset 0x38 - Pointer to start of embedded System.map */ - .globl embedded_sysmap_start -embedded_sysmap_start: - .llong 0 - /* Offset 0x40 - Pointer to end of embedded System.map */ - .globl embedded_sysmap_end -embedded_sysmap_end: - .llong 0 - -#endif /* CONFIG_PPC_ISERIES */ - - /* Secondary processors spin on this value until it goes to 1. */ - .globl __secondary_hold_spinloop -__secondary_hold_spinloop: - .llong 0x0 - - /* Secondary processors write this value with their cpu # */ - /* after they enter the spin loop immediately below. */ - .globl __secondary_hold_acknowledge -__secondary_hold_acknowledge: - .llong 0x0 - - . = 0x60 -/* - * The following code is used on pSeries to hold secondary processors - * in a spin loop after they have been freed from OpenFirmware, but - * before the bulk of the kernel has been relocated. This code - * is relocated to physical address 0x60 before prom_init is run. - * All of it must fit below the first exception vector at 0x100. - */ -_GLOBAL(__secondary_hold) - mfmsr r24 - ori r24,r24,MSR_RI - mtmsrd r24 /* RI on */ - - /* Grab our linux cpu number */ - mr r24,r3 - - /* Tell the master cpu we're here */ - /* Relocation is off & we are located at an address less */ - /* than 0x100, so only need to grab low order offset. */ - std r24,__secondary_hold_acknowledge@l(0) - sync - - /* All secondary cpus wait here until told to start. */ -100: ld r4,__secondary_hold_spinloop@l(0) - cmpdi 0,r4,1 - bne 100b - -#ifdef CONFIG_HMT - b .hmt_init -#else -#ifdef CONFIG_SMP - mr r3,r24 - b .pSeries_secondary_smp_init -#else - BUG_OPCODE -#endif -#endif - -/* This value is used to mark exception frames on the stack. */ - .section ".toc","aw" -exception_marker: - .tc ID_72656773_68657265[TC],0x7265677368657265 - .text - -/* - * The following macros define the code that appears as - * the prologue to each of the exception handlers. They - * are split into two parts to allow a single kernel binary - * to be used for pSeries and iSeries. - * LOL. One day... - paulus - */ - -/* - * We make as much of the exception code common between native - * exception handlers (including pSeries LPAR) and iSeries LPAR - * implementations as possible. - */ - -/* - * This is the start of the interrupt handlers for pSeries - * This code runs with relocation off. - */ -#define EX_R9 0 -#define EX_R10 8 -#define EX_R11 16 -#define EX_R12 24 -#define EX_R13 32 -#define EX_SRR0 40 -#define EX_DAR 48 -#define EX_DSISR 56 -#define EX_CCR 60 -#define EX_R3 64 -#define EX_LR 72 - -#define EXCEPTION_PROLOG_PSERIES(area, label) \ - mfspr r13,SPRN_SPRG3; /* get paca address into r13 */ \ - std r9,area+EX_R9(r13); /* save r9 - r12 */ \ - std r10,area+EX_R10(r13); \ - std r11,area+EX_R11(r13); \ - std r12,area+EX_R12(r13); \ - mfspr r9,SPRN_SPRG1; \ - std r9,area+EX_R13(r13); \ - mfcr r9; \ - clrrdi r12,r13,32; /* get high part of &label */ \ - mfmsr r10; \ - mfspr r11,SPRN_SRR0; /* save SRR0 */ \ - ori r12,r12,(label)@l; /* virt addr of handler */ \ - ori r10,r10,MSR_IR|MSR_DR|MSR_RI; \ - mtspr SPRN_SRR0,r12; \ - mfspr r12,SPRN_SRR1; /* and SRR1 */ \ - mtspr SPRN_SRR1,r10; \ - rfid; \ - b . /* prevent speculative execution */ - -/* - * This is the start of the interrupt handlers for iSeries - * This code runs with relocation on. - */ -#define EXCEPTION_PROLOG_ISERIES_1(area) \ - mfspr r13,SPRN_SPRG3; /* get paca address into r13 */ \ - std r9,area+EX_R9(r13); /* save r9 - r12 */ \ - std r10,area+EX_R10(r13); \ - std r11,area+EX_R11(r13); \ - std r12,area+EX_R12(r13); \ - mfspr r9,SPRN_SPRG1; \ - std r9,area+EX_R13(r13); \ - mfcr r9 - -#define EXCEPTION_PROLOG_ISERIES_2 \ - mfmsr r10; \ - ld r11,PACALPPACA+LPPACASRR0(r13); \ - ld r12,PACALPPACA+LPPACASRR1(r13); \ - ori r10,r10,MSR_RI; \ - mtmsrd r10,1 - -/* - * The common exception prolog is used for all except a few exceptions - * such as a segment miss on a kernel address. We have to be prepared - * to take another exception from the point where we first touch the - * kernel stack onwards. - * - * On entry r13 points to the paca, r9-r13 are saved in the paca, - * r9 contains the saved CR, r11 and r12 contain the saved SRR0 and - * SRR1, and relocation is on. - */ -#define EXCEPTION_PROLOG_COMMON(n, area) \ - andi. r10,r12,MSR_PR; /* See if coming from user */ \ - mr r10,r1; /* Save r1 */ \ - subi r1,r1,INT_FRAME_SIZE; /* alloc frame on kernel stack */ \ - beq- 1f; \ - ld r1,PACAKSAVE(r13); /* kernel stack to use */ \ -1: cmpdi cr1,r1,0; /* check if r1 is in userspace */ \ - bge- cr1,bad_stack; /* abort if it is */ \ - std r9,_CCR(r1); /* save CR in stackframe */ \ - std r11,_NIP(r1); /* save SRR0 in stackframe */ \ - std r12,_MSR(r1); /* save SRR1 in stackframe */ \ - std r10,0(r1); /* make stack chain pointer */ \ - std r0,GPR0(r1); /* save r0 in stackframe */ \ - std r10,GPR1(r1); /* save r1 in stackframe */ \ - std r2,GPR2(r1); /* save r2 in stackframe */ \ - SAVE_4GPRS(3, r1); /* save r3 - r6 in stackframe */ \ - SAVE_2GPRS(7, r1); /* save r7, r8 in stackframe */ \ - ld r9,area+EX_R9(r13); /* move r9, r10 to stackframe */ \ - ld r10,area+EX_R10(r13); \ - std r9,GPR9(r1); \ - std r10,GPR10(r1); \ - ld r9,area+EX_R11(r13); /* move r11 - r13 to stackframe */ \ - ld r10,area+EX_R12(r13); \ - ld r11,area+EX_R13(r13); \ - std r9,GPR11(r1); \ - std r10,GPR12(r1); \ - std r11,GPR13(r1); \ - ld r2,PACATOC(r13); /* get kernel TOC into r2 */ \ - mflr r9; /* save LR in stackframe */ \ - std r9,_LINK(r1); \ - mfctr r10; /* save CTR in stackframe */ \ - std r10,_CTR(r1); \ - mfspr r11,SPRN_XER; /* save XER in stackframe */ \ - std r11,_XER(r1); \ - li r9,(n)+1; \ - std r9,_TRAP(r1); /* set trap number */ \ - li r10,0; \ - ld r11,exception_marker@toc(r2); \ - std r10,RESULT(r1); /* clear regs->result */ \ - std r11,STACK_FRAME_OVERHEAD-16(r1); /* mark the frame */ - -/* - * Exception vectors. - */ -#define STD_EXCEPTION_PSERIES(n, label) \ - . = n; \ - .globl label##_pSeries; \ -label##_pSeries: \ - HMT_MEDIUM; \ - mtspr SPRN_SPRG1,r13; /* save r13 */ \ - RUNLATCH_ON(r13); \ - EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label##_common) - -#define STD_EXCEPTION_ISERIES(n, label, area) \ - .globl label##_iSeries; \ -label##_iSeries: \ - HMT_MEDIUM; \ - mtspr SPRN_SPRG1,r13; /* save r13 */ \ - RUNLATCH_ON(r13); \ - EXCEPTION_PROLOG_ISERIES_1(area); \ - EXCEPTION_PROLOG_ISERIES_2; \ - b label##_common - -#define MASKABLE_EXCEPTION_ISERIES(n, label) \ - .globl label##_iSeries; \ -label##_iSeries: \ - HMT_MEDIUM; \ - mtspr SPRN_SPRG1,r13; /* save r13 */ \ - RUNLATCH_ON(r13); \ - EXCEPTION_PROLOG_ISERIES_1(PACA_EXGEN); \ - lbz r10,PACAPROCENABLED(r13); \ - cmpwi 0,r10,0; \ - beq- label##_iSeries_masked; \ - EXCEPTION_PROLOG_ISERIES_2; \ - b label##_common; \ - -#ifdef DO_SOFT_DISABLE -#define DISABLE_INTS \ - lbz r10,PACAPROCENABLED(r13); \ - li r11,0; \ - std r10,SOFTE(r1); \ - mfmsr r10; \ - stb r11,PACAPROCENABLED(r13); \ - ori r10,r10,MSR_EE; \ - mtmsrd r10,1 - -#define ENABLE_INTS \ - lbz r10,PACAPROCENABLED(r13); \ - mfmsr r11; \ - std r10,SOFTE(r1); \ - ori r11,r11,MSR_EE; \ - mtmsrd r11,1 - -#else /* hard enable/disable interrupts */ -#define DISABLE_INTS - -#define ENABLE_INTS \ - ld r12,_MSR(r1); \ - mfmsr r11; \ - rlwimi r11,r12,0,MSR_EE; \ - mtmsrd r11,1 - -#endif - -#define STD_EXCEPTION_COMMON(trap, label, hdlr) \ - .align 7; \ - .globl label##_common; \ -label##_common: \ - EXCEPTION_PROLOG_COMMON(trap, PACA_EXGEN); \ - DISABLE_INTS; \ - bl .save_nvgprs; \ - addi r3,r1,STACK_FRAME_OVERHEAD; \ - bl hdlr; \ - b .ret_from_except - -#define STD_EXCEPTION_COMMON_LITE(trap, label, hdlr) \ - .align 7; \ - .globl label##_common; \ -label##_common: \ - EXCEPTION_PROLOG_COMMON(trap, PACA_EXGEN); \ - DISABLE_INTS; \ - addi r3,r1,STACK_FRAME_OVERHEAD; \ - bl hdlr; \ - b .ret_from_except_lite - -/* - * Start of pSeries system interrupt routines - */ - . = 0x100 - .globl __start_interrupts -__start_interrupts: - - STD_EXCEPTION_PSERIES(0x100, system_reset) - - . = 0x200 -_machine_check_pSeries: - HMT_MEDIUM - mtspr SPRN_SPRG1,r13 /* save r13 */ - RUNLATCH_ON(r13) - EXCEPTION_PROLOG_PSERIES(PACA_EXMC, machine_check_common) - - . = 0x300 - .globl data_access_pSeries -data_access_pSeries: - HMT_MEDIUM - mtspr SPRN_SPRG1,r13 -BEGIN_FTR_SECTION - mtspr SPRN_SPRG2,r12 - mfspr r13,SPRN_DAR - mfspr r12,SPRN_DSISR - srdi r13,r13,60 - rlwimi r13,r12,16,0x20 - mfcr r12 - cmpwi r13,0x2c - beq .do_stab_bolted_pSeries - mtcrf 0x80,r12 - mfspr r12,SPRN_SPRG2 -END_FTR_SECTION_IFCLR(CPU_FTR_SLB) - EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, data_access_common) - - . = 0x380 - .globl data_access_slb_pSeries -data_access_slb_pSeries: - HMT_MEDIUM - mtspr SPRN_SPRG1,r13 - RUNLATCH_ON(r13) - mfspr r13,SPRN_SPRG3 /* get paca address into r13 */ - std r3,PACA_EXSLB+EX_R3(r13) - mfspr r3,SPRN_DAR - std r9,PACA_EXSLB+EX_R9(r13) /* save r9 - r12 */ - mfcr r9 -#ifdef __DISABLED__ - /* Keep that around for when we re-implement dynamic VSIDs */ - cmpdi r3,0 - bge slb_miss_user_pseries -#endif /* __DISABLED__ */ - std r10,PACA_EXSLB+EX_R10(r13) - std r11,PACA_EXSLB+EX_R11(r13) - std r12,PACA_EXSLB+EX_R12(r13) - mfspr r10,SPRN_SPRG1 - std r10,PACA_EXSLB+EX_R13(r13) - mfspr r12,SPRN_SRR1 /* and SRR1 */ - b .slb_miss_realmode /* Rel. branch works in real mode */ - - STD_EXCEPTION_PSERIES(0x400, instruction_access) - - . = 0x480 - .globl instruction_access_slb_pSeries -instruction_access_slb_pSeries: - HMT_MEDIUM - mtspr SPRN_SPRG1,r13 - RUNLATCH_ON(r13) - mfspr r13,SPRN_SPRG3 /* get paca address into r13 */ - std r3,PACA_EXSLB+EX_R3(r13) - mfspr r3,SPRN_SRR0 /* SRR0 is faulting address */ - std r9,PACA_EXSLB+EX_R9(r13) /* save r9 - r12 */ - mfcr r9 -#ifdef __DISABLED__ - /* Keep that around for when we re-implement dynamic VSIDs */ - cmpdi r3,0 - bge slb_miss_user_pseries -#endif /* __DISABLED__ */ - std r10,PACA_EXSLB+EX_R10(r13) - std r11,PACA_EXSLB+EX_R11(r13) - std r12,PACA_EXSLB+EX_R12(r13) - mfspr r10,SPRN_SPRG1 - std r10,PACA_EXSLB+EX_R13(r13) - mfspr r12,SPRN_SRR1 /* and SRR1 */ - b .slb_miss_realmode /* Rel. branch works in real mode */ - - STD_EXCEPTION_PSERIES(0x500, hardware_interrupt) - STD_EXCEPTION_PSERIES(0x600, alignment) - STD_EXCEPTION_PSERIES(0x700, program_check) - STD_EXCEPTION_PSERIES(0x800, fp_unavailable) - STD_EXCEPTION_PSERIES(0x900, decrementer) - STD_EXCEPTION_PSERIES(0xa00, trap_0a) - STD_EXCEPTION_PSERIES(0xb00, trap_0b) - - . = 0xc00 - .globl system_call_pSeries -system_call_pSeries: - HMT_MEDIUM - RUNLATCH_ON(r9) - mr r9,r13 - mfmsr r10 - mfspr r13,SPRN_SPRG3 - mfspr r11,SPRN_SRR0 - clrrdi r12,r13,32 - oris r12,r12,system_call_common@h - ori r12,r12,system_call_common@l - mtspr SPRN_SRR0,r12 - ori r10,r10,MSR_IR|MSR_DR|MSR_RI - mfspr r12,SPRN_SRR1 - mtspr SPRN_SRR1,r10 - rfid - b . /* prevent speculative execution */ - - STD_EXCEPTION_PSERIES(0xd00, single_step) - STD_EXCEPTION_PSERIES(0xe00, trap_0e) - - /* We need to deal with the Altivec unavailable exception - * here which is at 0xf20, thus in the middle of the - * prolog code of the PerformanceMonitor one. A little - * trickery is thus necessary - */ - . = 0xf00 - b performance_monitor_pSeries - - STD_EXCEPTION_PSERIES(0xf20, altivec_unavailable) - - STD_EXCEPTION_PSERIES(0x1300, instruction_breakpoint) - STD_EXCEPTION_PSERIES(0x1700, altivec_assist) - - . = 0x3000 - -/*** pSeries interrupt support ***/ - - /* moved from 0xf00 */ - STD_EXCEPTION_PSERIES(., performance_monitor) - - .align 7 -_GLOBAL(do_stab_bolted_pSeries) - mtcrf 0x80,r12 - mfspr r12,SPRN_SPRG2 - EXCEPTION_PROLOG_PSERIES(PACA_EXSLB, .do_stab_bolted) - -/* - * We have some room here we use that to put - * the peries slb miss user trampoline code so it's reasonably - * away from slb_miss_user_common to avoid problems with rfid - * - * This is used for when the SLB miss handler has to go virtual, - * which doesn't happen for now anymore but will once we re-implement - * dynamic VSIDs for shared page tables - */ -#ifdef __DISABLED__ -slb_miss_user_pseries: - std r10,PACA_EXGEN+EX_R10(r13) - std r11,PACA_EXGEN+EX_R11(r13) - std r12,PACA_EXGEN+EX_R12(r13) - mfspr r10,SPRG1 - ld r11,PACA_EXSLB+EX_R9(r13) - ld r12,PACA_EXSLB+EX_R3(r13) - std r10,PACA_EXGEN+EX_R13(r13) - std r11,PACA_EXGEN+EX_R9(r13) - std r12,PACA_EXGEN+EX_R3(r13) - clrrdi r12,r13,32 - mfmsr r10 - mfspr r11,SRR0 /* save SRR0 */ - ori r12,r12,slb_miss_user_common@l /* virt addr of handler */ - ori r10,r10,MSR_IR|MSR_DR|MSR_RI - mtspr SRR0,r12 - mfspr r12,SRR1 /* and SRR1 */ - mtspr SRR1,r10 - rfid - b . /* prevent spec. execution */ -#endif /* __DISABLED__ */ - -/* - * Vectors for the FWNMI option. Share common code. - */ - .globl system_reset_fwnmi -system_reset_fwnmi: - HMT_MEDIUM - mtspr SPRN_SPRG1,r13 /* save r13 */ - RUNLATCH_ON(r13) - EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, system_reset_common) - - .globl machine_check_fwnmi -machine_check_fwnmi: - HMT_MEDIUM - mtspr SPRN_SPRG1,r13 /* save r13 */ - RUNLATCH_ON(r13) - EXCEPTION_PROLOG_PSERIES(PACA_EXMC, machine_check_common) - -#ifdef CONFIG_PPC_ISERIES -/*** ISeries-LPAR interrupt handlers ***/ - - STD_EXCEPTION_ISERIES(0x200, machine_check, PACA_EXMC) - - .globl data_access_iSeries -data_access_iSeries: - mtspr SPRN_SPRG1,r13 -BEGIN_FTR_SECTION - mtspr SPRN_SPRG2,r12 - mfspr r13,SPRN_DAR - mfspr r12,SPRN_DSISR - srdi r13,r13,60 - rlwimi r13,r12,16,0x20 - mfcr r12 - cmpwi r13,0x2c - beq .do_stab_bolted_iSeries - mtcrf 0x80,r12 - mfspr r12,SPRN_SPRG2 -END_FTR_SECTION_IFCLR(CPU_FTR_SLB) - EXCEPTION_PROLOG_ISERIES_1(PACA_EXGEN) - EXCEPTION_PROLOG_ISERIES_2 - b data_access_common - -.do_stab_bolted_iSeries: - mtcrf 0x80,r12 - mfspr r12,SPRN_SPRG2 - EXCEPTION_PROLOG_ISERIES_1(PACA_EXSLB) - EXCEPTION_PROLOG_ISERIES_2 - b .do_stab_bolted - - .globl data_access_slb_iSeries -data_access_slb_iSeries: - mtspr SPRN_SPRG1,r13 /* save r13 */ - mfspr r13,SPRN_SPRG3 /* get paca address into r13 */ - std r3,PACA_EXSLB+EX_R3(r13) - mfspr r3,SPRN_DAR - std r9,PACA_EXSLB+EX_R9(r13) - mfcr r9 -#ifdef __DISABLED__ - cmpdi r3,0 - bge slb_miss_user_iseries -#endif - std r10,PACA_EXSLB+EX_R10(r13) - std r11,PACA_EXSLB+EX_R11(r13) - std r12,PACA_EXSLB+EX_R12(r13) - mfspr r10,SPRN_SPRG1 - std r10,PACA_EXSLB+EX_R13(r13) - ld r12,PACALPPACA+LPPACASRR1(r13); - b .slb_miss_realmode - - STD_EXCEPTION_ISERIES(0x400, instruction_access, PACA_EXGEN) - - .globl instruction_access_slb_iSeries -instruction_access_slb_iSeries: - mtspr SPRN_SPRG1,r13 /* save r13 */ - mfspr r13,SPRN_SPRG3 /* get paca address into r13 */ - std r3,PACA_EXSLB+EX_R3(r13) - ld r3,PACALPPACA+LPPACASRR0(r13) /* get SRR0 value */ - std r9,PACA_EXSLB+EX_R9(r13) - mfcr r9 -#ifdef __DISABLED__ - cmpdi r3,0 - bge .slb_miss_user_iseries -#endif - std r10,PACA_EXSLB+EX_R10(r13) - std r11,PACA_EXSLB+EX_R11(r13) - std r12,PACA_EXSLB+EX_R12(r13) - mfspr r10,SPRN_SPRG1 - std r10,PACA_EXSLB+EX_R13(r13) - ld r12,PACALPPACA+LPPACASRR1(r13); - b .slb_miss_realmode - -#ifdef __DISABLED__ -slb_miss_user_iseries: - std r10,PACA_EXGEN+EX_R10(r13) - std r11,PACA_EXGEN+EX_R11(r13) - std r12,PACA_EXGEN+EX_R12(r13) - mfspr r10,SPRG1 - ld r11,PACA_EXSLB+EX_R9(r13) - ld r12,PACA_EXSLB+EX_R3(r13) - std r10,PACA_EXGEN+EX_R13(r13) - std r11,PACA_EXGEN+EX_R9(r13) - std r12,PACA_EXGEN+EX_R3(r13) - EXCEPTION_PROLOG_ISERIES_2 - b slb_miss_user_common -#endif - - MASKABLE_EXCEPTION_ISERIES(0x500, hardware_interrupt) - STD_EXCEPTION_ISERIES(0x600, alignment, PACA_EXGEN) - STD_EXCEPTION_ISERIES(0x700, program_check, PACA_EXGEN) - STD_EXCEPTION_ISERIES(0x800, fp_unavailable, PACA_EXGEN) - MASKABLE_EXCEPTION_ISERIES(0x900, decrementer) - STD_EXCEPTION_ISERIES(0xa00, trap_0a, PACA_EXGEN) - STD_EXCEPTION_ISERIES(0xb00, trap_0b, PACA_EXGEN) - - .globl system_call_iSeries -system_call_iSeries: - mr r9,r13 - mfspr r13,SPRN_SPRG3 - EXCEPTION_PROLOG_ISERIES_2 - b system_call_common - - STD_EXCEPTION_ISERIES( 0xd00, single_step, PACA_EXGEN) - STD_EXCEPTION_ISERIES( 0xe00, trap_0e, PACA_EXGEN) - STD_EXCEPTION_ISERIES( 0xf00, performance_monitor, PACA_EXGEN) - - .globl system_reset_iSeries -system_reset_iSeries: - mfspr r13,SPRN_SPRG3 /* Get paca address */ - mfmsr r24 - ori r24,r24,MSR_RI - mtmsrd r24 /* RI on */ - lhz r24,PACAPACAINDEX(r13) /* Get processor # */ - cmpwi 0,r24,0 /* Are we processor 0? */ - beq .__start_initialization_iSeries /* Start up the first processor */ - mfspr r4,SPRN_CTRLF - li r5,CTRL_RUNLATCH /* Turn off the run light */ - andc r4,r4,r5 - mtspr SPRN_CTRLT,r4 - -1: - HMT_LOW -#ifdef CONFIG_SMP - lbz r23,PACAPROCSTART(r13) /* Test if this processor - * should start */ - sync - LOADADDR(r3,current_set) - sldi r28,r24,3 /* get current_set[cpu#] */ - ldx r3,r3,r28 - addi r1,r3,THREAD_SIZE - subi r1,r1,STACK_FRAME_OVERHEAD - - cmpwi 0,r23,0 - beq iSeries_secondary_smp_loop /* Loop until told to go */ - bne .__secondary_start /* Loop until told to go */ -iSeries_secondary_smp_loop: - /* Let the Hypervisor know we are alive */ - /* 8002 is a call to HvCallCfg::getLps, a harmless Hypervisor function */ - lis r3,0x8002 - rldicr r3,r3,32,15 /* r0 = (r3 << 32) & 0xffff000000000000 */ -#else /* CONFIG_SMP */ - /* Yield the processor. This is required for non-SMP kernels - which are running on multi-threaded machines. */ - lis r3,0x8000 - rldicr r3,r3,32,15 /* r3 = (r3 << 32) & 0xffff000000000000 */ - addi r3,r3,18 /* r3 = 0x8000000000000012 which is "yield" */ - li r4,0 /* "yield timed" */ - li r5,-1 /* "yield forever" */ -#endif /* CONFIG_SMP */ - li r0,-1 /* r0=-1 indicates a Hypervisor call */ - sc /* Invoke the hypervisor via a system call */ - mfspr r13,SPRN_SPRG3 /* Put r13 back ???? */ - b 1b /* If SMP not configured, secondaries - * loop forever */ - - .globl decrementer_iSeries_masked -decrementer_iSeries_masked: - li r11,1 - stb r11,PACALPPACA+LPPACADECRINT(r13) - lwz r12,PACADEFAULTDECR(r13) - mtspr SPRN_DEC,r12 - /* fall through */ - - .globl hardware_interrupt_iSeries_masked -hardware_interrupt_iSeries_masked: - mtcrf 0x80,r9 /* Restore regs */ - ld r11,PACALPPACA+LPPACASRR0(r13) - ld r12,PACALPPACA+LPPACASRR1(r13) - mtspr SPRN_SRR0,r11 - mtspr SPRN_SRR1,r12 - ld r9,PACA_EXGEN+EX_R9(r13) - ld r10,PACA_EXGEN+EX_R10(r13) - ld r11,PACA_EXGEN+EX_R11(r13) - ld r12,PACA_EXGEN+EX_R12(r13) - ld r13,PACA_EXGEN+EX_R13(r13) - rfid - b . /* prevent speculative execution */ -#endif /* CONFIG_PPC_ISERIES */ - -/*** Common interrupt handlers ***/ - - STD_EXCEPTION_COMMON(0x100, system_reset, .system_reset_exception) - - /* - * Machine check is different because we use a different - * save area: PACA_EXMC instead of PACA_EXGEN. - */ - .align 7 - .globl machine_check_common -machine_check_common: - EXCEPTION_PROLOG_COMMON(0x200, PACA_EXMC) - DISABLE_INTS - bl .save_nvgprs - addi r3,r1,STACK_FRAME_OVERHEAD - bl .machine_check_exception - b .ret_from_except - - STD_EXCEPTION_COMMON_LITE(0x900, decrementer, .timer_interrupt) - STD_EXCEPTION_COMMON(0xa00, trap_0a, .unknown_exception) - STD_EXCEPTION_COMMON(0xb00, trap_0b, .unknown_exception) - STD_EXCEPTION_COMMON(0xd00, single_step, .single_step_exception) - STD_EXCEPTION_COMMON(0xe00, trap_0e, .unknown_exception) - STD_EXCEPTION_COMMON(0xf00, performance_monitor, .performance_monitor_exception) - STD_EXCEPTION_COMMON(0x1300, instruction_breakpoint, .instruction_breakpoint_exception) -#ifdef CONFIG_ALTIVEC - STD_EXCEPTION_COMMON(0x1700, altivec_assist, .altivec_assist_exception) -#else - STD_EXCEPTION_COMMON(0x1700, altivec_assist, .unknown_exception) -#endif - -/* - * Here we have detected that the kernel stack pointer is bad. - * R9 contains the saved CR, r13 points to the paca, - * r10 contains the (bad) kernel stack pointer, - * r11 and r12 contain the saved SRR0 and SRR1. - * We switch to using an emergency stack, save the registers there, - * and call kernel_bad_stack(), which panics. - */ -bad_stack: - ld r1,PACAEMERGSP(r13) - subi r1,r1,64+INT_FRAME_SIZE - std r9,_CCR(r1) - std r10,GPR1(r1) - std r11,_NIP(r1) - std r12,_MSR(r1) - mfspr r11,SPRN_DAR - mfspr r12,SPRN_DSISR - std r11,_DAR(r1) - std r12,_DSISR(r1) - mflr r10 - mfctr r11 - mfxer r12 - std r10,_LINK(r1) - std r11,_CTR(r1) - std r12,_XER(r1) - SAVE_GPR(0,r1) - SAVE_GPR(2,r1) - SAVE_4GPRS(3,r1) - SAVE_2GPRS(7,r1) - SAVE_10GPRS(12,r1) - SAVE_10GPRS(22,r1) - addi r11,r1,INT_FRAME_SIZE - std r11,0(r1) - li r12,0 - std r12,0(r11) - ld r2,PACATOC(r13) -1: addi r3,r1,STACK_FRAME_OVERHEAD - bl .kernel_bad_stack - b 1b - -/* - * Return from an exception with minimal checks. - * The caller is assumed to have done EXCEPTION_PROLOG_COMMON. - * If interrupts have been enabled, or anything has been - * done that might have changed the scheduling status of - * any task or sent any task a signal, you should use - * ret_from_except or ret_from_except_lite instead of this. - */ - .globl fast_exception_return -fast_exception_return: - ld r12,_MSR(r1) - ld r11,_NIP(r1) - andi. r3,r12,MSR_RI /* check if RI is set */ - beq- unrecov_fer - ld r3,_CCR(r1) - ld r4,_LINK(r1) - ld r5,_CTR(r1) - ld r6,_XER(r1) - mtcr r3 - mtlr r4 - mtctr r5 - mtxer r6 - REST_GPR(0, r1) - REST_8GPRS(2, r1) - - mfmsr r10 - clrrdi r10,r10,2 /* clear RI (LE is 0 already) */ - mtmsrd r10,1 - - mtspr SPRN_SRR1,r12 - mtspr SPRN_SRR0,r11 - REST_4GPRS(10, r1) - ld r1,GPR1(r1) - rfid - b . /* prevent speculative execution */ - -unrecov_fer: - bl .save_nvgprs -1: addi r3,r1,STACK_FRAME_OVERHEAD - bl .unrecoverable_exception - b 1b - -/* - * Here r13 points to the paca, r9 contains the saved CR, - * SRR0 and SRR1 are saved in r11 and r12, - * r9 - r13 are saved in paca->exgen. - */ - .align 7 - .globl data_access_common -data_access_common: - RUNLATCH_ON(r10) /* It wont fit in the 0x300 handler */ - mfspr r10,SPRN_DAR - std r10,PACA_EXGEN+EX_DAR(r13) - mfspr r10,SPRN_DSISR - stw r10,PACA_EXGEN+EX_DSISR(r13) - EXCEPTION_PROLOG_COMMON(0x300, PACA_EXGEN) - ld r3,PACA_EXGEN+EX_DAR(r13) - lwz r4,PACA_EXGEN+EX_DSISR(r13) - li r5,0x300 - b .do_hash_page /* Try to handle as hpte fault */ - - .align 7 - .globl instruction_access_common -instruction_access_common: - EXCEPTION_PROLOG_COMMON(0x400, PACA_EXGEN) - ld r3,_NIP(r1) - andis. r4,r12,0x5820 - li r5,0x400 - b .do_hash_page /* Try to handle as hpte fault */ - -/* - * Here is the common SLB miss user that is used when going to virtual - * mode for SLB misses, that is currently not used - */ -#ifdef __DISABLED__ - .align 7 - .globl slb_miss_user_common -slb_miss_user_common: - mflr r10 - std r3,PACA_EXGEN+EX_DAR(r13) - stw r9,PACA_EXGEN+EX_CCR(r13) - std r10,PACA_EXGEN+EX_LR(r13) - std r11,PACA_EXGEN+EX_SRR0(r13) - bl .slb_allocate_user - - ld r10,PACA_EXGEN+EX_LR(r13) - ld r3,PACA_EXGEN+EX_R3(r13) - lwz r9,PACA_EXGEN+EX_CCR(r13) - ld r11,PACA_EXGEN+EX_SRR0(r13) - mtlr r10 - beq- slb_miss_fault - - andi. r10,r12,MSR_RI /* check for unrecoverable exception */ - beq- unrecov_user_slb - mfmsr r10 - -.machine push -.machine "power4" - mtcrf 0x80,r9 -.machine pop - - clrrdi r10,r10,2 /* clear RI before setting SRR0/1 */ - mtmsrd r10,1 - - mtspr SRR0,r11 - mtspr SRR1,r12 - - ld r9,PACA_EXGEN+EX_R9(r13) - ld r10,PACA_EXGEN+EX_R10(r13) - ld r11,PACA_EXGEN+EX_R11(r13) - ld r12,PACA_EXGEN+EX_R12(r13) - ld r13,PACA_EXGEN+EX_R13(r13) - rfid - b . - -slb_miss_fault: - EXCEPTION_PROLOG_COMMON(0x380, PACA_EXGEN) - ld r4,PACA_EXGEN+EX_DAR(r13) - li r5,0 - std r4,_DAR(r1) - std r5,_DSISR(r1) - b .handle_page_fault - -unrecov_user_slb: - EXCEPTION_PROLOG_COMMON(0x4200, PACA_EXGEN) - DISABLE_INTS - bl .save_nvgprs -1: addi r3,r1,STACK_FRAME_OVERHEAD - bl .unrecoverable_exception - b 1b - -#endif /* __DISABLED__ */ - - -/* - * r13 points to the PACA, r9 contains the saved CR, - * r12 contain the saved SRR1, SRR0 is still ready for return - * r3 has the faulting address - * r9 - r13 are saved in paca->exslb. - * r3 is saved in paca->slb_r3 - * We assume we aren't going to take any exceptions during this procedure. - */ -_GLOBAL(slb_miss_realmode) - mflr r10 - - stw r9,PACA_EXSLB+EX_CCR(r13) /* save CR in exc. frame */ - std r10,PACA_EXSLB+EX_LR(r13) /* save LR */ - - bl .slb_allocate_realmode - - /* All done -- return from exception. */ - - ld r10,PACA_EXSLB+EX_LR(r13) - ld r3,PACA_EXSLB+EX_R3(r13) - lwz r9,PACA_EXSLB+EX_CCR(r13) /* get saved CR */ -#ifdef CONFIG_PPC_ISERIES - ld r11,PACALPPACA+LPPACASRR0(r13) /* get SRR0 value */ -#endif /* CONFIG_PPC_ISERIES */ - - mtlr r10 - - andi. r10,r12,MSR_RI /* check for unrecoverable exception */ - beq- unrecov_slb - -.machine push -.machine "power4" - mtcrf 0x80,r9 - mtcrf 0x01,r9 /* slb_allocate uses cr0 and cr7 */ -.machine pop - -#ifdef CONFIG_PPC_ISERIES - mtspr SPRN_SRR0,r11 - mtspr SPRN_SRR1,r12 -#endif /* CONFIG_PPC_ISERIES */ - ld r9,PACA_EXSLB+EX_R9(r13) - ld r10,PACA_EXSLB+EX_R10(r13) - ld r11,PACA_EXSLB+EX_R11(r13) - ld r12,PACA_EXSLB+EX_R12(r13) - ld r13,PACA_EXSLB+EX_R13(r13) - rfid - b . /* prevent speculative execution */ - -unrecov_slb: - EXCEPTION_PROLOG_COMMON(0x4100, PACA_EXSLB) - DISABLE_INTS - bl .save_nvgprs -1: addi r3,r1,STACK_FRAME_OVERHEAD - bl .unrecoverable_exception - b 1b - - .align 7 - .globl hardware_interrupt_common - .globl hardware_interrupt_entry -hardware_interrupt_common: - EXCEPTION_PROLOG_COMMON(0x500, PACA_EXGEN) -hardware_interrupt_entry: - DISABLE_INTS - addi r3,r1,STACK_FRAME_OVERHEAD - bl .do_IRQ - b .ret_from_except_lite - - .align 7 - .globl alignment_common -alignment_common: - mfspr r10,SPRN_DAR - std r10,PACA_EXGEN+EX_DAR(r13) - mfspr r10,SPRN_DSISR - stw r10,PACA_EXGEN+EX_DSISR(r13) - EXCEPTION_PROLOG_COMMON(0x600, PACA_EXGEN) - ld r3,PACA_EXGEN+EX_DAR(r13) - lwz r4,PACA_EXGEN+EX_DSISR(r13) - std r3,_DAR(r1) - std r4,_DSISR(r1) - bl .save_nvgprs - addi r3,r1,STACK_FRAME_OVERHEAD - ENABLE_INTS - bl .alignment_exception - b .ret_from_except - - .align 7 - .globl program_check_common -program_check_common: - EXCEPTION_PROLOG_COMMON(0x700, PACA_EXGEN) - bl .save_nvgprs - addi r3,r1,STACK_FRAME_OVERHEAD - ENABLE_INTS - bl .program_check_exception - b .ret_from_except - - .align 7 - .globl fp_unavailable_common -fp_unavailable_common: - EXCEPTION_PROLOG_COMMON(0x800, PACA_EXGEN) - bne .load_up_fpu /* if from user, just load it up */ - bl .save_nvgprs - addi r3,r1,STACK_FRAME_OVERHEAD - ENABLE_INTS - bl .kernel_fp_unavailable_exception - BUG_OPCODE - - .align 7 - .globl altivec_unavailable_common -altivec_unavailable_common: - EXCEPTION_PROLOG_COMMON(0xf20, PACA_EXGEN) -#ifdef CONFIG_ALTIVEC -BEGIN_FTR_SECTION - bne .load_up_altivec /* if from user, just load it up */ -END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) -#endif - bl .save_nvgprs - addi r3,r1,STACK_FRAME_OVERHEAD - ENABLE_INTS - bl .altivec_unavailable_exception - b .ret_from_except - -#ifdef CONFIG_ALTIVEC -/* - * load_up_altivec(unused, unused, tsk) - * Disable VMX for the task which had it previously, - * and save its vector registers in its thread_struct. - * Enables the VMX for use in the kernel on return. - * On SMP we know the VMX is free, since we give it up every - * switch (ie, no lazy save of the vector registers). - * On entry: r13 == 'current' && last_task_used_altivec != 'current' - */ -_STATIC(load_up_altivec) - mfmsr r5 /* grab the current MSR */ - oris r5,r5,MSR_VEC@h - mtmsrd r5 /* enable use of VMX now */ - isync - -/* - * For SMP, we don't do lazy VMX switching because it just gets too - * horrendously complex, especially when a task switches from one CPU - * to another. Instead we call giveup_altvec in switch_to. - * VRSAVE isn't dealt with here, that is done in the normal context - * switch code. Note that we could rely on vrsave value to eventually - * avoid saving all of the VREGs here... - */ -#ifndef CONFIG_SMP - ld r3,last_task_used_altivec@got(r2) - ld r4,0(r3) - cmpdi 0,r4,0 - beq 1f - /* Save VMX state to last_task_used_altivec's THREAD struct */ - addi r4,r4,THREAD - SAVE_32VRS(0,r5,r4) - mfvscr vr0 - li r10,THREAD_VSCR - stvx vr0,r10,r4 - /* Disable VMX for last_task_used_altivec */ - ld r5,PT_REGS(r4) - ld r4,_MSR-STACK_FRAME_OVERHEAD(r5) - lis r6,MSR_VEC@h - andc r4,r4,r6 - std r4,_MSR-STACK_FRAME_OVERHEAD(r5) -1: -#endif /* CONFIG_SMP */ - /* Hack: if we get an altivec unavailable trap with VRSAVE - * set to all zeros, we assume this is a broken application - * that fails to set it properly, and thus we switch it to - * all 1's - */ - mfspr r4,SPRN_VRSAVE - cmpdi 0,r4,0 - bne+ 1f - li r4,-1 - mtspr SPRN_VRSAVE,r4 -1: - /* enable use of VMX after return */ - ld r4,PACACURRENT(r13) - addi r5,r4,THREAD /* Get THREAD */ - oris r12,r12,MSR_VEC@h - std r12,_MSR(r1) - li r4,1 - li r10,THREAD_VSCR - stw r4,THREAD_USED_VR(r5) - lvx vr0,r10,r5 - mtvscr vr0 - REST_32VRS(0,r4,r5) -#ifndef CONFIG_SMP - /* Update last_task_used_math to 'current' */ - subi r4,r5,THREAD /* Back to 'current' */ - std r4,0(r3) -#endif /* CONFIG_SMP */ - /* restore registers and return */ - b fast_exception_return -#endif /* CONFIG_ALTIVEC */ - -/* - * Hash table stuff - */ - .align 7 -_GLOBAL(do_hash_page) - std r3,_DAR(r1) - std r4,_DSISR(r1) - - andis. r0,r4,0xa450 /* weird error? */ - bne- .handle_page_fault /* if not, try to insert a HPTE */ -BEGIN_FTR_SECTION - andis. r0,r4,0x0020 /* Is it a segment table fault? */ - bne- .do_ste_alloc /* If so handle it */ -END_FTR_SECTION_IFCLR(CPU_FTR_SLB) - - /* - * We need to set the _PAGE_USER bit if MSR_PR is set or if we are - * accessing a userspace segment (even from the kernel). We assume - * kernel addresses always have the high bit set. - */ - rlwinm r4,r4,32-25+9,31-9,31-9 /* DSISR_STORE -> _PAGE_RW */ - rotldi r0,r3,15 /* Move high bit into MSR_PR posn */ - orc r0,r12,r0 /* MSR_PR | ~high_bit */ - rlwimi r4,r0,32-13,30,30 /* becomes _PAGE_USER access bit */ - ori r4,r4,1 /* add _PAGE_PRESENT */ - rlwimi r4,r5,22+2,31-2,31-2 /* Set _PAGE_EXEC if trap is 0x400 */ - - /* - * On iSeries, we soft-disable interrupts here, then - * hard-enable interrupts so that the hash_page code can spin on - * the hash_table_lock without problems on a shared processor. - */ - DISABLE_INTS - - /* - * r3 contains the faulting address - * r4 contains the required access permissions - * r5 contains the trap number - * - * at return r3 = 0 for success - */ - bl .hash_page /* build HPTE if possible */ - cmpdi r3,0 /* see if hash_page succeeded */ - -#ifdef DO_SOFT_DISABLE - /* - * If we had interrupts soft-enabled at the point where the - * DSI/ISI occurred, and an interrupt came in during hash_page, - * handle it now. - * We jump to ret_from_except_lite rather than fast_exception_return - * because ret_from_except_lite will check for and handle pending - * interrupts if necessary. - */ - beq .ret_from_except_lite - /* For a hash failure, we don't bother re-enabling interrupts */ - ble- 12f - - /* - * hash_page couldn't handle it, set soft interrupt enable back - * to what it was before the trap. Note that .local_irq_restore - * handles any interrupts pending at this point. - */ - ld r3,SOFTE(r1) - bl .local_irq_restore - b 11f -#else - beq fast_exception_return /* Return from exception on success */ - ble- 12f /* Failure return from hash_page */ - - /* fall through */ -#endif - -/* Here we have a page fault that hash_page can't handle. */ -_GLOBAL(handle_page_fault) - ENABLE_INTS -11: ld r4,_DAR(r1) - ld r5,_DSISR(r1) - addi r3,r1,STACK_FRAME_OVERHEAD - bl .do_page_fault - cmpdi r3,0 - beq+ .ret_from_except_lite - bl .save_nvgprs - mr r5,r3 - addi r3,r1,STACK_FRAME_OVERHEAD - lwz r4,_DAR(r1) - bl .bad_page_fault - b .ret_from_except - -/* We have a page fault that hash_page could handle but HV refused - * the PTE insertion - */ -12: bl .save_nvgprs - addi r3,r1,STACK_FRAME_OVERHEAD - lwz r4,_DAR(r1) - bl .low_hash_fault - b .ret_from_except - - /* here we have a segment miss */ -_GLOBAL(do_ste_alloc) - bl .ste_allocate /* try to insert stab entry */ - cmpdi r3,0 - beq+ fast_exception_return - b .handle_page_fault - -/* - * r13 points to the PACA, r9 contains the saved CR, - * r11 and r12 contain the saved SRR0 and SRR1. - * r9 - r13 are saved in paca->exslb. - * We assume we aren't going to take any exceptions during this procedure. - * We assume (DAR >> 60) == 0xc. - */ - .align 7 -_GLOBAL(do_stab_bolted) - stw r9,PACA_EXSLB+EX_CCR(r13) /* save CR in exc. frame */ - std r11,PACA_EXSLB+EX_SRR0(r13) /* save SRR0 in exc. frame */ - - /* Hash to the primary group */ - ld r10,PACASTABVIRT(r13) - mfspr r11,SPRN_DAR - srdi r11,r11,28 - rldimi r10,r11,7,52 /* r10 = first ste of the group */ - - /* Calculate VSID */ - /* This is a kernel address, so protovsid = ESID */ - ASM_VSID_SCRAMBLE(r11, r9) - rldic r9,r11,12,16 /* r9 = vsid << 12 */ - - /* Search the primary group for a free entry */ -1: ld r11,0(r10) /* Test valid bit of the current ste */ - andi. r11,r11,0x80 - beq 2f - addi r10,r10,16 - andi. r11,r10,0x70 - bne 1b - - /* Stick for only searching the primary group for now. */ - /* At least for now, we use a very simple random castout scheme */ - /* Use the TB as a random number ; OR in 1 to avoid entry 0 */ - mftb r11 - rldic r11,r11,4,57 /* r11 = (r11 << 4) & 0x70 */ - ori r11,r11,0x10 - - /* r10 currently points to an ste one past the group of interest */ - /* make it point to the randomly selected entry */ - subi r10,r10,128 - or r10,r10,r11 /* r10 is the entry to invalidate */ - - isync /* mark the entry invalid */ - ld r11,0(r10) - rldicl r11,r11,56,1 /* clear the valid bit */ - rotldi r11,r11,8 - std r11,0(r10) - sync - - clrrdi r11,r11,28 /* Get the esid part of the ste */ - slbie r11 - -2: std r9,8(r10) /* Store the vsid part of the ste */ - eieio - - mfspr r11,SPRN_DAR /* Get the new esid */ - clrrdi r11,r11,28 /* Permits a full 32b of ESID */ - ori r11,r11,0x90 /* Turn on valid and kp */ - std r11,0(r10) /* Put new entry back into the stab */ - - sync - - /* All done -- return from exception. */ - lwz r9,PACA_EXSLB+EX_CCR(r13) /* get saved CR */ - ld r11,PACA_EXSLB+EX_SRR0(r13) /* get saved SRR0 */ - - andi. r10,r12,MSR_RI - beq- unrecov_slb - - mtcrf 0x80,r9 /* restore CR */ - - mfmsr r10 - clrrdi r10,r10,2 - mtmsrd r10,1 - - mtspr SPRN_SRR0,r11 - mtspr SPRN_SRR1,r12 - ld r9,PACA_EXSLB+EX_R9(r13) - ld r10,PACA_EXSLB+EX_R10(r13) - ld r11,PACA_EXSLB+EX_R11(r13) - ld r12,PACA_EXSLB+EX_R12(r13) - ld r13,PACA_EXSLB+EX_R13(r13) - rfid - b . /* prevent speculative execution */ - -/* - * Space for CPU0's segment table. - * - * On iSeries, the hypervisor must fill in at least one entry before - * we get control (with relocate on). The address is give to the hv - * as a page number (see xLparMap in lpardata.c), so this must be at a - * fixed address (the linker can't compute (u64)&initial_stab >> - * PAGE_SHIFT). - */ - . = STAB0_PHYS_ADDR /* 0x6000 */ - .globl initial_stab -initial_stab: - .space 4096 - -/* - * Data area reserved for FWNMI option. - * This address (0x7000) is fixed by the RPA. - */ - .= 0x7000 - .globl fwnmi_data_area -fwnmi_data_area: - - /* iSeries does not use the FWNMI stuff, so it is safe to put - * this here, even if we later allow kernels that will boot on - * both pSeries and iSeries */ -#ifdef CONFIG_PPC_ISERIES - . = LPARMAP_PHYS -#include "lparmap.s" -/* - * This ".text" is here for old compilers that generate a trailing - * .note section when compiling .c files to .s - */ - .text -#endif /* CONFIG_PPC_ISERIES */ - - . = 0x8000 - -/* - * On pSeries, secondary processors spin in the following code. - * At entry, r3 = this processor's number (physical cpu id) - */ -_GLOBAL(pSeries_secondary_smp_init) - mr r24,r3 - - /* turn on 64-bit mode */ - bl .enable_64b_mode - isync - - /* Copy some CPU settings from CPU 0 */ - bl .__restore_cpu_setup - - /* Set up a paca value for this processor. Since we have the - * physical cpu id in r24, we need to search the pacas to find - * which logical id maps to our physical one. - */ - LOADADDR(r13, paca) /* Get base vaddr of paca array */ - li r5,0 /* logical cpu id */ -1: lhz r6,PACAHWCPUID(r13) /* Load HW procid from paca */ - cmpw r6,r24 /* Compare to our id */ - beq 2f - addi r13,r13,PACA_SIZE /* Loop to next PACA on miss */ - addi r5,r5,1 - cmpwi r5,NR_CPUS - blt 1b - - mr r3,r24 /* not found, copy phys to r3 */ - b .kexec_wait /* next kernel might do better */ - -2: mtspr SPRN_SPRG3,r13 /* Save vaddr of paca in SPRG3 */ - /* From now on, r24 is expected to be logical cpuid */ - mr r24,r5 -3: HMT_LOW - lbz r23,PACAPROCSTART(r13) /* Test if this processor should */ - /* start. */ - sync - - /* Create a temp kernel stack for use before relocation is on. */ - ld r1,PACAEMERGSP(r13) - subi r1,r1,STACK_FRAME_OVERHEAD - - cmpwi 0,r23,0 -#ifdef CONFIG_SMP - bne .__secondary_start -#endif - b 3b /* Loop until told to go */ - -#ifdef CONFIG_PPC_ISERIES -_STATIC(__start_initialization_iSeries) - /* Clear out the BSS */ - LOADADDR(r11,__bss_stop) - LOADADDR(r8,__bss_start) - sub r11,r11,r8 /* bss size */ - addi r11,r11,7 /* round up to an even double word */ - rldicl. r11,r11,61,3 /* shift right by 3 */ - beq 4f - addi r8,r8,-8 - li r0,0 - mtctr r11 /* zero this many doublewords */ -3: stdu r0,8(r8) - bdnz 3b -4: - LOADADDR(r1,init_thread_union) - addi r1,r1,THREAD_SIZE - li r0,0 - stdu r0,-STACK_FRAME_OVERHEAD(r1) - - LOADADDR(r3,cpu_specs) - LOADADDR(r4,cur_cpu_spec) - li r5,0 - bl .identify_cpu - - LOADADDR(r2,__toc_start) - addi r2,r2,0x4000 - addi r2,r2,0x4000 - - bl .iSeries_early_setup - bl .early_setup - - /* relocation is on at this point */ - - b .start_here_common -#endif /* CONFIG_PPC_ISERIES */ - -#ifdef CONFIG_PPC_MULTIPLATFORM - -_STATIC(__mmu_off) - mfmsr r3 - andi. r0,r3,MSR_IR|MSR_DR - beqlr - andc r3,r3,r0 - mtspr SPRN_SRR0,r4 - mtspr SPRN_SRR1,r3 - sync - rfid - b . /* prevent speculative execution */ - - -/* - * Here is our main kernel entry point. We support currently 2 kind of entries - * depending on the value of r5. - * - * r5 != NULL -> OF entry, we go to prom_init, "legacy" parameter content - * in r3...r7 - * - * r5 == NULL -> kexec style entry. r3 is a physical pointer to the - * DT block, r4 is a physical pointer to the kernel itself - * - */ -_GLOBAL(__start_initialization_multiplatform) - /* - * Are we booted from a PROM Of-type client-interface ? - */ - cmpldi cr0,r5,0 - bne .__boot_from_prom /* yes -> prom */ - - /* Save parameters */ - mr r31,r3 - mr r30,r4 - - /* Make sure we are running in 64 bits mode */ - bl .enable_64b_mode - - /* Setup some critical 970 SPRs before switching MMU off */ - bl .__970_cpu_preinit - - /* cpu # */ - li r24,0 - - /* Switch off MMU if not already */ - LOADADDR(r4, .__after_prom_start - KERNELBASE) - add r4,r4,r30 - bl .__mmu_off - b .__after_prom_start - -_STATIC(__boot_from_prom) - /* Save parameters */ - mr r31,r3 - mr r30,r4 - mr r29,r5 - mr r28,r6 - mr r27,r7 - - /* Make sure we are running in 64 bits mode */ - bl .enable_64b_mode - - /* put a relocation offset into r3 */ - bl .reloc_offset - - LOADADDR(r2,__toc_start) - addi r2,r2,0x4000 - addi r2,r2,0x4000 - - /* Relocate the TOC from a virt addr to a real addr */ - sub r2,r2,r3 - - /* Restore parameters */ - mr r3,r31 - mr r4,r30 - mr r5,r29 - mr r6,r28 - mr r7,r27 - - /* Do all of the interaction with OF client interface */ - bl .prom_init - /* We never return */ - trap - -/* - * At this point, r3 contains the physical address we are running at, - * returned by prom_init() - */ -_STATIC(__after_prom_start) - -/* - * We need to run with __start at physical address 0. - * This will leave some code in the first 256B of - * real memory, which are reserved for software use. - * The remainder of the first page is loaded with the fixed - * interrupt vectors. The next two pages are filled with - * unknown exception placeholders. - * - * Note: This process overwrites the OF exception vectors. - * r26 == relocation offset - * r27 == KERNELBASE - */ - bl .reloc_offset - mr r26,r3 - SET_REG_TO_CONST(r27,KERNELBASE) - - li r3,0 /* target addr */ - - // XXX FIXME: Use phys returned by OF (r30) - sub r4,r27,r26 /* source addr */ - /* current address of _start */ - /* i.e. where we are running */ - /* the source addr */ - - LOADADDR(r5,copy_to_here) /* # bytes of memory to copy */ - sub r5,r5,r27 - - li r6,0x100 /* Start offset, the first 0x100 */ - /* bytes were copied earlier. */ - - bl .copy_and_flush /* copy the first n bytes */ - /* this includes the code being */ - /* executed here. */ - - LOADADDR(r0, 4f) /* Jump to the copy of this code */ - mtctr r0 /* that we just made/relocated */ - bctr - -4: LOADADDR(r5,klimit) - sub r5,r5,r26 - ld r5,0(r5) /* get the value of klimit */ - sub r5,r5,r27 - bl .copy_and_flush /* copy the rest */ - b .start_here_multiplatform - -#endif /* CONFIG_PPC_MULTIPLATFORM */ - -/* - * Copy routine used to copy the kernel to start at physical address 0 - * and flush and invalidate the caches as needed. - * r3 = dest addr, r4 = source addr, r5 = copy limit, r6 = start offset - * on exit, r3, r4, r5 are unchanged, r6 is updated to be >= r5. - * - * Note: this routine *only* clobbers r0, r6 and lr - */ -_GLOBAL(copy_and_flush) - addi r5,r5,-8 - addi r6,r6,-8 -4: li r0,16 /* Use the least common */ - /* denominator cache line */ - /* size. This results in */ - /* extra cache line flushes */ - /* but operation is correct. */ - /* Can't get cache line size */ - /* from NACA as it is being */ - /* moved too. */ - - mtctr r0 /* put # words/line in ctr */ -3: addi r6,r6,8 /* copy a cache line */ - ldx r0,r6,r4 - stdx r0,r6,r3 - bdnz 3b - dcbst r6,r3 /* write it to memory */ - sync - icbi r6,r3 /* flush the icache line */ - cmpld 0,r6,r5 - blt 4b - sync - addi r5,r5,8 - addi r6,r6,8 - blr - -.align 8 -copy_to_here: - -#ifdef CONFIG_SMP -#ifdef CONFIG_PPC_PMAC -/* - * On PowerMac, secondary processors starts from the reset vector, which - * is temporarily turned into a call to one of the functions below. - */ - .section ".text"; - .align 2 ; - - .globl __secondary_start_pmac_0 -__secondary_start_pmac_0: - /* NB the entries for cpus 0, 1, 2 must each occupy 8 bytes. */ - li r24,0 - b 1f - li r24,1 - b 1f - li r24,2 - b 1f - li r24,3 -1: - -_GLOBAL(pmac_secondary_start) - /* turn on 64-bit mode */ - bl .enable_64b_mode - isync - - /* Copy some CPU settings from CPU 0 */ - bl .__restore_cpu_setup - - /* pSeries do that early though I don't think we really need it */ - mfmsr r3 - ori r3,r3,MSR_RI - mtmsrd r3 /* RI on */ - - /* Set up a paca value for this processor. */ - LOADADDR(r4, paca) /* Get base vaddr of paca array */ - mulli r13,r24,PACA_SIZE /* Calculate vaddr of right paca */ - add r13,r13,r4 /* for this processor. */ - mtspr SPRN_SPRG3,r13 /* Save vaddr of paca in SPRG3 */ - - /* Create a temp kernel stack for use before relocation is on. */ - ld r1,PACAEMERGSP(r13) - subi r1,r1,STACK_FRAME_OVERHEAD - - b .__secondary_start - -#endif /* CONFIG_PPC_PMAC */ - -/* - * This function is called after the master CPU has released the - * secondary processors. The execution environment is relocation off. - * The paca for this processor has the following fields initialized at - * this point: - * 1. Processor number - * 2. Segment table pointer (virtual address) - * On entry the following are set: - * r1 = stack pointer. vaddr for iSeries, raddr (temp stack) for pSeries - * r24 = cpu# (in Linux terms) - * r13 = paca virtual address - * SPRG3 = paca virtual address - */ -_GLOBAL(__secondary_start) - - HMT_MEDIUM /* Set thread priority to MEDIUM */ - - ld r2,PACATOC(r13) - li r6,0 - stb r6,PACAPROCENABLED(r13) - -#ifndef CONFIG_PPC_ISERIES - /* Initialize the page table pointer register. */ - LOADADDR(r6,_SDR1) - ld r6,0(r6) /* get the value of _SDR1 */ - mtspr SPRN_SDR1,r6 /* set the htab location */ -#endif - /* Initialize the first segment table (or SLB) entry */ - ld r3,PACASTABVIRT(r13) /* get addr of segment table */ -BEGIN_FTR_SECTION - bl .stab_initialize -END_FTR_SECTION_IFCLR(CPU_FTR_SLB) - bl .slb_initialize - - /* Initialize the kernel stack. Just a repeat for iSeries. */ - LOADADDR(r3,current_set) - sldi r28,r24,3 /* get current_set[cpu#] */ - ldx r1,r3,r28 - addi r1,r1,THREAD_SIZE-STACK_FRAME_OVERHEAD - std r1,PACAKSAVE(r13) - - ld r3,PACASTABREAL(r13) /* get raddr of segment table */ - ori r4,r3,1 /* turn on valid bit */ - -#ifdef CONFIG_PPC_ISERIES - li r0,-1 /* hypervisor call */ - li r3,1 - sldi r3,r3,63 /* 0x8000000000000000 */ - ori r3,r3,4 /* 0x8000000000000004 */ - sc /* HvCall_setASR */ -#else - /* set the ASR */ - ld r3,systemcfg@got(r2) /* r3 = ptr to systemcfg */ - ld r3,0(r3) - lwz r3,PLATFORM(r3) /* r3 = platform flags */ - andi. r3,r3,PLATFORM_LPAR /* Test if bit 0 is set (LPAR bit) */ - beq 98f /* branch if result is 0 */ - mfspr r3,SPRN_PVR - srwi r3,r3,16 - cmpwi r3,0x37 /* SStar */ - beq 97f - cmpwi r3,0x36 /* IStar */ - beq 97f - cmpwi r3,0x34 /* Pulsar */ - bne 98f -97: li r3,H_SET_ASR /* hcall = H_SET_ASR */ - HVSC /* Invoking hcall */ - b 99f -98: /* !(rpa hypervisor) || !(star) */ - mtasr r4 /* set the stab location */ -99: -#endif - li r7,0 - mtlr r7 - - /* enable MMU and jump to start_secondary */ - LOADADDR(r3,.start_secondary_prolog) - SET_REG_TO_CONST(r4, MSR_KERNEL) -#ifdef DO_SOFT_DISABLE - ori r4,r4,MSR_EE -#endif - mtspr SPRN_SRR0,r3 - mtspr SPRN_SRR1,r4 - rfid - b . /* prevent speculative execution */ - -/* - * Running with relocation on at this point. All we want to do is - * zero the stack back-chain pointer before going into C code. - */ -_GLOBAL(start_secondary_prolog) - li r3,0 - std r3,0(r1) /* Zero the stack frame pointer */ - bl .start_secondary -#endif - -/* - * This subroutine clobbers r11 and r12 - */ -_GLOBAL(enable_64b_mode) - mfmsr r11 /* grab the current MSR */ - li r12,1 - rldicr r12,r12,MSR_SF_LG,(63-MSR_SF_LG) - or r11,r11,r12 - li r12,1 - rldicr r12,r12,MSR_ISF_LG,(63-MSR_ISF_LG) - or r11,r11,r12 - mtmsrd r11 - isync - blr - -#ifdef CONFIG_PPC_MULTIPLATFORM -/* - * This is where the main kernel code starts. - */ -_STATIC(start_here_multiplatform) - /* get a new offset, now that the kernel has moved. */ - bl .reloc_offset - mr r26,r3 - - /* Clear out the BSS. It may have been done in prom_init, - * already but that's irrelevant since prom_init will soon - * be detached from the kernel completely. Besides, we need - * to clear it now for kexec-style entry. - */ - LOADADDR(r11,__bss_stop) - LOADADDR(r8,__bss_start) - sub r11,r11,r8 /* bss size */ - addi r11,r11,7 /* round up to an even double word */ - rldicl. r11,r11,61,3 /* shift right by 3 */ - beq 4f - addi r8,r8,-8 - li r0,0 - mtctr r11 /* zero this many doublewords */ -3: stdu r0,8(r8) - bdnz 3b -4: - - mfmsr r6 - ori r6,r6,MSR_RI - mtmsrd r6 /* RI on */ - -#ifdef CONFIG_HMT - /* Start up the second thread on cpu 0 */ - mfspr r3,SPRN_PVR - srwi r3,r3,16 - cmpwi r3,0x34 /* Pulsar */ - beq 90f - cmpwi r3,0x36 /* Icestar */ - beq 90f - cmpwi r3,0x37 /* SStar */ - beq 90f - b 91f /* HMT not supported */ -90: li r3,0 - bl .hmt_start_secondary -91: -#endif - - /* The following gets the stack and TOC set up with the regs */ - /* pointing to the real addr of the kernel stack. This is */ - /* all done to support the C function call below which sets */ - /* up the htab. This is done because we have relocated the */ - /* kernel but are still running in real mode. */ - - LOADADDR(r3,init_thread_union) - sub r3,r3,r26 - - /* set up a stack pointer (physical address) */ - addi r1,r3,THREAD_SIZE - li r0,0 - stdu r0,-STACK_FRAME_OVERHEAD(r1) - - /* set up the TOC (physical address) */ - LOADADDR(r2,__toc_start) - addi r2,r2,0x4000 - addi r2,r2,0x4000 - sub r2,r2,r26 - - LOADADDR(r3,cpu_specs) - sub r3,r3,r26 - LOADADDR(r4,cur_cpu_spec) - sub r4,r4,r26 - mr r5,r26 - bl .identify_cpu - - /* Save some low level config HIDs of CPU0 to be copied to - * other CPUs later on, or used for suspend/resume - */ - bl .__save_cpu_setup - sync - - /* Setup a valid physical PACA pointer in SPRG3 for early_setup - * note that boot_cpuid can always be 0 nowadays since there is - * nowhere it can be initialized differently before we reach this - * code - */ - LOADADDR(r27, boot_cpuid) - sub r27,r27,r26 - lwz r27,0(r27) - - LOADADDR(r24, paca) /* Get base vaddr of paca array */ - mulli r13,r27,PACA_SIZE /* Calculate vaddr of right paca */ - add r13,r13,r24 /* for this processor. */ - sub r13,r13,r26 /* convert to physical addr */ - mtspr SPRN_SPRG3,r13 /* PPPBBB: Temp... -Peter */ - - /* Do very early kernel initializations, including initial hash table, - * stab and slb setup before we turn on relocation. */ - - /* Restore parameters passed from prom_init/kexec */ - mr r3,r31 - bl .early_setup - - /* set the ASR */ - ld r3,PACASTABREAL(r13) - ori r4,r3,1 /* turn on valid bit */ - ld r3,systemcfg@got(r2) /* r3 = ptr to systemcfg */ - ld r3,0(r3) - lwz r3,PLATFORM(r3) /* r3 = platform flags */ - andi. r3,r3,PLATFORM_LPAR /* Test if bit 0 is set (LPAR bit) */ - beq 98f /* branch if result is 0 */ - mfspr r3,SPRN_PVR - srwi r3,r3,16 - cmpwi r3,0x37 /* SStar */ - beq 97f - cmpwi r3,0x36 /* IStar */ - beq 97f - cmpwi r3,0x34 /* Pulsar */ - bne 98f -97: li r3,H_SET_ASR /* hcall = H_SET_ASR */ - HVSC /* Invoking hcall */ - b 99f -98: /* !(rpa hypervisor) || !(star) */ - mtasr r4 /* set the stab location */ -99: - /* Set SDR1 (hash table pointer) */ - ld r3,systemcfg@got(r2) /* r3 = ptr to systemcfg */ - ld r3,0(r3) - lwz r3,PLATFORM(r3) /* r3 = platform flags */ - /* Test if bit 0 is set (LPAR bit) */ - andi. r3,r3,PLATFORM_LPAR - bne 98f /* branch if result is !0 */ - LOADADDR(r6,_SDR1) /* Only if NOT LPAR */ - sub r6,r6,r26 - ld r6,0(r6) /* get the value of _SDR1 */ - mtspr SPRN_SDR1,r6 /* set the htab location */ -98: - LOADADDR(r3,.start_here_common) - SET_REG_TO_CONST(r4, MSR_KERNEL) - mtspr SPRN_SRR0,r3 - mtspr SPRN_SRR1,r4 - rfid - b . /* prevent speculative execution */ -#endif /* CONFIG_PPC_MULTIPLATFORM */ - - /* This is where all platforms converge execution */ -_STATIC(start_here_common) - /* relocation is on at this point */ - - /* The following code sets up the SP and TOC now that we are */ - /* running with translation enabled. */ - - LOADADDR(r3,init_thread_union) - - /* set up the stack */ - addi r1,r3,THREAD_SIZE - li r0,0 - stdu r0,-STACK_FRAME_OVERHEAD(r1) - - /* Apply the CPUs-specific fixups (nop out sections not relevant - * to this CPU - */ - li r3,0 - bl .do_cpu_ftr_fixups - - LOADADDR(r26, boot_cpuid) - lwz r26,0(r26) - - LOADADDR(r24, paca) /* Get base vaddr of paca array */ - mulli r13,r26,PACA_SIZE /* Calculate vaddr of right paca */ - add r13,r13,r24 /* for this processor. */ - mtspr SPRN_SPRG3,r13 - - /* ptr to current */ - LOADADDR(r4,init_task) - std r4,PACACURRENT(r13) - - /* Load the TOC */ - ld r2,PACATOC(r13) - std r1,PACAKSAVE(r13) - - bl .setup_system - - /* Load up the kernel context */ -5: -#ifdef DO_SOFT_DISABLE - li r5,0 - stb r5,PACAPROCENABLED(r13) /* Soft Disabled */ - mfmsr r5 - ori r5,r5,MSR_EE /* Hard Enabled */ - mtmsrd r5 -#endif - - bl .start_kernel - -_GLOBAL(hmt_init) -#ifdef CONFIG_HMT - LOADADDR(r5, hmt_thread_data) - mfspr r7,SPRN_PVR - srwi r7,r7,16 - cmpwi r7,0x34 /* Pulsar */ - beq 90f - cmpwi r7,0x36 /* Icestar */ - beq 91f - cmpwi r7,0x37 /* SStar */ - beq 91f - b 101f -90: mfspr r6,SPRN_PIR - andi. r6,r6,0x1f - b 92f -91: mfspr r6,SPRN_PIR - andi. r6,r6,0x3ff -92: sldi r4,r24,3 - stwx r6,r5,r4 - bl .hmt_start_secondary - b 101f - -__hmt_secondary_hold: - LOADADDR(r5, hmt_thread_data) - clrldi r5,r5,4 - li r7,0 - mfspr r6,SPRN_PIR - mfspr r8,SPRN_PVR - srwi r8,r8,16 - cmpwi r8,0x34 - bne 93f - andi. r6,r6,0x1f - b 103f -93: andi. r6,r6,0x3f - -103: lwzx r8,r5,r7 - cmpw r8,r6 - beq 104f - addi r7,r7,8 - b 103b - -104: addi r7,r7,4 - lwzx r9,r5,r7 - mr r24,r9 -101: -#endif - mr r3,r24 - b .pSeries_secondary_smp_init - -#ifdef CONFIG_HMT -_GLOBAL(hmt_start_secondary) - LOADADDR(r4,__hmt_secondary_hold) - clrldi r4,r4,4 - mtspr SPRN_NIADORM, r4 - mfspr r4, SPRN_MSRDORM - li r5, -65 - and r4, r4, r5 - mtspr SPRN_MSRDORM, r4 - lis r4,0xffef - ori r4,r4,0x7403 - mtspr SPRN_TSC, r4 - li r4,0x1f4 - mtspr SPRN_TST, r4 - mfspr r4, SPRN_HID0 - ori r4, r4, 0x1 - mtspr SPRN_HID0, r4 - mfspr r4, SPRN_CTRLF - oris r4, r4, 0x40 - mtspr SPRN_CTRLT, r4 - blr -#endif - -/* - * We put a few things here that have to be page-aligned. - * This stuff goes at the beginning of the bss, which is page-aligned. - */ - .section ".bss" - - .align PAGE_SHIFT - - .globl empty_zero_page -empty_zero_page: - .space PAGE_SIZE - - .globl swapper_pg_dir -swapper_pg_dir: - .space PAGE_SIZE - -/* - * This space gets a copy of optional info passed to us by the bootstrap - * Used to pass parameters into the kernel like root=/dev/sda1, etc. - */ - .globl cmd_line -cmd_line: - .space COMMAND_LINE_SIZE diff --git a/arch/ppc64/kernel/hvconsole.c b/arch/ppc64/kernel/hvconsole.c deleted file mode 100644 index 138e128a3886..000000000000 --- a/arch/ppc64/kernel/hvconsole.c +++ /dev/null @@ -1,74 +0,0 @@ -/* - * hvconsole.c - * Copyright (C) 2004 Hollis Blanchard, IBM Corporation - * Copyright (C) 2004 IBM Corporation - * - * Additional Author(s): - * Ryan S. Arnold <rsa@us.ibm.com> - * - * LPAR console support. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <asm/hvcall.h> -#include <asm/hvconsole.h> - -/** - * hvc_get_chars - retrieve characters from firmware for denoted vterm adatper - * @vtermno: The vtermno or unit_address of the adapter from which to fetch the - * data. - * @buf: The character buffer into which to put the character data fetched from - * firmware. - * @count: not used? - */ -int hvc_get_chars(uint32_t vtermno, char *buf, int count) -{ - unsigned long got; - - if (plpar_hcall(H_GET_TERM_CHAR, vtermno, 0, 0, 0, &got, - (unsigned long *)buf, (unsigned long *)buf+1) == H_Success) - return got; - return 0; -} - -EXPORT_SYMBOL(hvc_get_chars); - - -/** - * hvc_put_chars: send characters to firmware for denoted vterm adapter - * @vtermno: The vtermno or unit_address of the adapter from which the data - * originated. - * @buf: The character buffer that contains the character data to send to - * firmware. - * @count: Send this number of characters. - */ -int hvc_put_chars(uint32_t vtermno, const char *buf, int count) -{ - unsigned long *lbuf = (unsigned long *) buf; - long ret; - - ret = plpar_hcall_norets(H_PUT_TERM_CHAR, vtermno, count, lbuf[0], - lbuf[1]); - if (ret == H_Success) - return count; - if (ret == H_Busy) - return 0; - return -EIO; -} - -EXPORT_SYMBOL(hvc_put_chars); diff --git a/arch/ppc64/kernel/hvcserver.c b/arch/ppc64/kernel/hvcserver.c deleted file mode 100644 index 4d584172055a..000000000000 --- a/arch/ppc64/kernel/hvcserver.c +++ /dev/null @@ -1,251 +0,0 @@ -/* - * hvcserver.c - * Copyright (C) 2004 Ryan S Arnold, IBM Corporation - * - * PPC64 virtual I/O console server support. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/kernel.h> -#include <linux/list.h> -#include <linux/module.h> -#include <linux/slab.h> - -#include <asm/hvcall.h> -#include <asm/hvcserver.h> -#include <asm/io.h> - -#define HVCS_ARCH_VERSION "1.0.0" - -MODULE_AUTHOR("Ryan S. Arnold <rsa@us.ibm.com>"); -MODULE_DESCRIPTION("IBM hvcs ppc64 API"); -MODULE_LICENSE("GPL"); -MODULE_VERSION(HVCS_ARCH_VERSION); - -/* - * Convert arch specific return codes into relevant errnos. The hvcs - * functions aren't performance sensitive, so this conversion isn't an - * issue. - */ -int hvcs_convert(long to_convert) -{ - switch (to_convert) { - case H_Success: - return 0; - case H_Parameter: - return -EINVAL; - case H_Hardware: - return -EIO; - case H_Busy: - case H_LongBusyOrder1msec: - case H_LongBusyOrder10msec: - case H_LongBusyOrder100msec: - case H_LongBusyOrder1sec: - case H_LongBusyOrder10sec: - case H_LongBusyOrder100sec: - return -EBUSY; - case H_Function: /* fall through */ - default: - return -EPERM; - } -} - -/** - * hvcs_free_partner_info - free pi allocated by hvcs_get_partner_info - * @head: list_head pointer for an allocated list of partner info structs to - * free. - * - * This function is used to free the partner info list that was returned by - * calling hvcs_get_partner_info(). - */ -int hvcs_free_partner_info(struct list_head *head) -{ - struct hvcs_partner_info *pi; - struct list_head *element; - - if (!head) - return -EINVAL; - - while (!list_empty(head)) { - element = head->next; - pi = list_entry(element, struct hvcs_partner_info, node); - list_del(element); - kfree(pi); - } - - return 0; -} -EXPORT_SYMBOL(hvcs_free_partner_info); - -/* Helper function for hvcs_get_partner_info */ -int hvcs_next_partner(uint32_t unit_address, - unsigned long last_p_partition_ID, - unsigned long last_p_unit_address, unsigned long *pi_buff) - -{ - long retval; - retval = plpar_hcall_norets(H_VTERM_PARTNER_INFO, unit_address, - last_p_partition_ID, - last_p_unit_address, virt_to_phys(pi_buff)); - return hvcs_convert(retval); -} - -/** - * hvcs_get_partner_info - Get all of the partner info for a vty-server adapter - * @unit_address: The unit_address of the vty-server adapter for which this - * function is fetching partner info. - * @head: An initialized list_head pointer to an empty list to use to return the - * list of partner info fetched from the hypervisor to the caller. - * @pi_buff: A page sized buffer pre-allocated prior to calling this function - * that is to be used to be used by firmware as an iterator to keep track - * of the partner info retrieval. - * - * This function returns non-zero on success, or if there is no partner info. - * - * The pi_buff is pre-allocated prior to calling this function because this - * function may be called with a spin_lock held and kmalloc of a page is not - * recommended as GFP_ATOMIC. - * - * The first long of this buffer is used to store a partner unit address. The - * second long is used to store a partner partition ID and starting at - * pi_buff[2] is the 79 character Converged Location Code (diff size than the - * unsigned longs, hence the casting mumbo jumbo you see later). - * - * Invocation of this function should always be followed by an invocation of - * hvcs_free_partner_info() using a pointer to the SAME list head instance - * that was passed as a parameter to this function. - */ -int hvcs_get_partner_info(uint32_t unit_address, struct list_head *head, - unsigned long *pi_buff) -{ - /* - * Dealt with as longs because of the hcall interface even though the - * values are uint32_t. - */ - unsigned long last_p_partition_ID; - unsigned long last_p_unit_address; - struct hvcs_partner_info *next_partner_info = NULL; - int more = 1; - int retval; - - memset(pi_buff, 0x00, PAGE_SIZE); - /* invalid parameters */ - if (!head || !pi_buff) - return -EINVAL; - - last_p_partition_ID = last_p_unit_address = ~0UL; - INIT_LIST_HEAD(head); - - do { - retval = hvcs_next_partner(unit_address, last_p_partition_ID, - last_p_unit_address, pi_buff); - if (retval) { - /* - * Don't indicate that we've failed if we have - * any list elements. - */ - if (!list_empty(head)) - return 0; - return retval; - } - - last_p_partition_ID = pi_buff[0]; - last_p_unit_address = pi_buff[1]; - - /* This indicates that there are no further partners */ - if (last_p_partition_ID == ~0UL - && last_p_unit_address == ~0UL) - break; - - /* This is a very small struct and will be freed soon in - * hvcs_free_partner_info(). */ - next_partner_info = kmalloc(sizeof(struct hvcs_partner_info), - GFP_ATOMIC); - - if (!next_partner_info) { - printk(KERN_WARNING "HVCONSOLE: kmalloc() failed to" - " allocate partner info struct.\n"); - hvcs_free_partner_info(head); - return -ENOMEM; - } - - next_partner_info->unit_address - = (unsigned int)last_p_unit_address; - next_partner_info->partition_ID - = (unsigned int)last_p_partition_ID; - - /* copy the Null-term char too */ - strncpy(&next_partner_info->location_code[0], - (char *)&pi_buff[2], - strlen((char *)&pi_buff[2]) + 1); - - list_add_tail(&(next_partner_info->node), head); - next_partner_info = NULL; - - } while (more); - - return 0; -} -EXPORT_SYMBOL(hvcs_get_partner_info); - -/** - * hvcs_register_connection - establish a connection between this vty-server and - * a vty. - * @unit_address: The unit address of the vty-server adapter that is to be - * establish a connection. - * @p_partition_ID: The partition ID of the vty adapter that is to be connected. - * @p_unit_address: The unit address of the vty adapter to which the vty-server - * is to be connected. - * - * If this function is called once and -EINVAL is returned it may - * indicate that the partner info needs to be refreshed for the - * target unit address at which point the caller must invoke - * hvcs_get_partner_info() and then call this function again. If, - * for a second time, -EINVAL is returned then it indicates that - * there is probably already a partner connection registered to a - * different vty-server adapter. It is also possible that a second - * -EINVAL may indicate that one of the parms is not valid, for - * instance if the link was removed between the vty-server adapter - * and the vty adapter that you are trying to open. Don't shoot the - * messenger. Firmware implemented it this way. - */ -int hvcs_register_connection( uint32_t unit_address, - uint32_t p_partition_ID, uint32_t p_unit_address) -{ - long retval; - retval = plpar_hcall_norets(H_REGISTER_VTERM, unit_address, - p_partition_ID, p_unit_address); - return hvcs_convert(retval); -} -EXPORT_SYMBOL(hvcs_register_connection); - -/** - * hvcs_free_connection - free the connection between a vty-server and vty - * @unit_address: The unit address of the vty-server that is to have its - * connection severed. - * - * This function is used to free the partner connection between a vty-server - * adapter and a vty adapter. - * - * If -EBUSY is returned continue to call this function until 0 is returned. - */ -int hvcs_free_connection(uint32_t unit_address) -{ - long retval; - retval = plpar_hcall_norets(H_FREE_VTERM, unit_address); - return hvcs_convert(retval); -} -EXPORT_SYMBOL(hvcs_free_connection); diff --git a/arch/ppc64/kernel/idle.c b/arch/ppc64/kernel/idle.c index 8abd2ad92832..b879d3057ef8 100644 --- a/arch/ppc64/kernel/idle.c +++ b/arch/ppc64/kernel/idle.c @@ -26,22 +26,18 @@ #include <asm/processor.h> #include <asm/cputable.h> #include <asm/time.h> -#include <asm/systemcfg.h> #include <asm/machdep.h> +#include <asm/smp.h> extern void power4_idle(void); void default_idle(void) { - long oldval; unsigned int cpu = smp_processor_id(); + set_thread_flag(TIF_POLLING_NRFLAG); while (1) { - oldval = test_and_clear_thread_flag(TIF_NEED_RESCHED); - - if (!oldval) { - set_thread_flag(TIF_POLLING_NRFLAG); - + if (!need_resched()) { while (!need_resched() && !cpu_is_offline(cpu)) { ppc64_runlatch_off(); @@ -54,13 +50,12 @@ void default_idle(void) } HMT_medium(); - clear_thread_flag(TIF_POLLING_NRFLAG); - } else { - set_need_resched(); } ppc64_runlatch_on(); + preempt_enable_no_resched(); schedule(); + preempt_disable(); if (cpu_is_offline(cpu) && system_state == SYSTEM_RUNNING) cpu_die(); } @@ -76,7 +71,9 @@ void native_idle(void) if (need_resched()) { ppc64_runlatch_on(); + preempt_enable_no_resched(); schedule(); + preempt_disable(); } if (cpu_is_offline(smp_processor_id()) && diff --git a/arch/ppc64/kernel/ioctl32.c b/arch/ppc64/kernel/ioctl32.c deleted file mode 100644 index ba4a899045c2..000000000000 --- a/arch/ppc64/kernel/ioctl32.c +++ /dev/null @@ -1,49 +0,0 @@ -/* - * ioctl32.c: Conversion between 32bit and 64bit native ioctls. - * - * Based on sparc64 ioctl32.c by: - * - * Copyright (C) 1997-2000 Jakub Jelinek (jakub@redhat.com) - * Copyright (C) 1998 Eddie C. Dost (ecd@skynet.be) - * - * ppc64 changes: - * - * Copyright (C) 2000 Ken Aaker (kdaaker@rchland.vnet.ibm.com) - * Copyright (C) 2001 Anton Blanchard (antonb@au.ibm.com) - * - * These routines maintain argument size conversion between 32bit and 64bit - * ioctls. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#define INCLUDES -#include "compat_ioctl.c" -#include <linux/syscalls.h> - -#define CODE -#include "compat_ioctl.c" - -#define HANDLE_IOCTL(cmd,handler) { cmd, (ioctl_trans_handler_t)handler, NULL }, -#define COMPATIBLE_IOCTL(cmd) HANDLE_IOCTL(cmd,sys_ioctl) - -#define IOCTL_TABLE_START \ - struct ioctl_trans ioctl_start[] = { -#define IOCTL_TABLE_END \ - }; - -IOCTL_TABLE_START -#include <linux/compat_ioctl.h> -#define DECLARES -#include "compat_ioctl.c" - -/* Little p (/dev/rtc, /dev/envctrl, etc.) */ -COMPATIBLE_IOCTL(_IOR('p', 20, int[7])) /* RTCGET */ -COMPATIBLE_IOCTL(_IOW('p', 21, int[7])) /* RTCSET */ - -IOCTL_TABLE_END - -int ioctl_table_size = ARRAY_SIZE(ioctl_start); diff --git a/arch/ppc64/kernel/iomap.c b/arch/ppc64/kernel/iomap.c deleted file mode 100644 index 6160c8dbb7c5..000000000000 --- a/arch/ppc64/kernel/iomap.c +++ /dev/null @@ -1,146 +0,0 @@ -/* - * arch/ppc64/kernel/iomap.c - * - * ppc64 "iomap" interface implementation. - * - * (C) Copyright 2004 Linus Torvalds - */ -#include <linux/init.h> -#include <linux/pci.h> -#include <linux/mm.h> -#include <asm/io.h> - -/* - * Here comes the ppc64 implementation of the IOMAP - * interfaces. - */ -unsigned int fastcall ioread8(void __iomem *addr) -{ - return readb(addr); -} -unsigned int fastcall ioread16(void __iomem *addr) -{ - return readw(addr); -} -unsigned int fastcall ioread16be(void __iomem *addr) -{ - return in_be16(addr); -} -unsigned int fastcall ioread32(void __iomem *addr) -{ - return readl(addr); -} -unsigned int fastcall ioread32be(void __iomem *addr) -{ - return in_be32(addr); -} -EXPORT_SYMBOL(ioread8); -EXPORT_SYMBOL(ioread16); -EXPORT_SYMBOL(ioread16be); -EXPORT_SYMBOL(ioread32); -EXPORT_SYMBOL(ioread32be); - -void fastcall iowrite8(u8 val, void __iomem *addr) -{ - writeb(val, addr); -} -void fastcall iowrite16(u16 val, void __iomem *addr) -{ - writew(val, addr); -} -void fastcall iowrite16be(u16 val, void __iomem *addr) -{ - out_be16(addr, val); -} -void fastcall iowrite32(u32 val, void __iomem *addr) -{ - writel(val, addr); -} -void fastcall iowrite32be(u32 val, void __iomem *addr) -{ - out_be32(addr, val); -} -EXPORT_SYMBOL(iowrite8); -EXPORT_SYMBOL(iowrite16); -EXPORT_SYMBOL(iowrite16be); -EXPORT_SYMBOL(iowrite32); -EXPORT_SYMBOL(iowrite32be); - -/* - * These are the "repeat read/write" functions. Note the - * non-CPU byte order. We do things in "IO byteorder" - * here. - * - * FIXME! We could make these do EEH handling if we really - * wanted. Not clear if we do. - */ -void ioread8_rep(void __iomem *addr, void *dst, unsigned long count) -{ - _insb((u8 __iomem *) addr, dst, count); -} -void ioread16_rep(void __iomem *addr, void *dst, unsigned long count) -{ - _insw_ns((u16 __iomem *) addr, dst, count); -} -void ioread32_rep(void __iomem *addr, void *dst, unsigned long count) -{ - _insl_ns((u32 __iomem *) addr, dst, count); -} -EXPORT_SYMBOL(ioread8_rep); -EXPORT_SYMBOL(ioread16_rep); -EXPORT_SYMBOL(ioread32_rep); - -void iowrite8_rep(void __iomem *addr, const void *src, unsigned long count) -{ - _outsb((u8 __iomem *) addr, src, count); -} -void iowrite16_rep(void __iomem *addr, const void *src, unsigned long count) -{ - _outsw_ns((u16 __iomem *) addr, src, count); -} -void iowrite32_rep(void __iomem *addr, const void *src, unsigned long count) -{ - _outsl_ns((u32 __iomem *) addr, src, count); -} -EXPORT_SYMBOL(iowrite8_rep); -EXPORT_SYMBOL(iowrite16_rep); -EXPORT_SYMBOL(iowrite32_rep); - -void __iomem *ioport_map(unsigned long port, unsigned int len) -{ - if (!_IO_IS_VALID(port)) - return NULL; - return (void __iomem *) (port+pci_io_base); -} - -void ioport_unmap(void __iomem *addr) -{ - /* Nothing to do */ -} -EXPORT_SYMBOL(ioport_map); -EXPORT_SYMBOL(ioport_unmap); - -void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max) -{ - unsigned long start = pci_resource_start(dev, bar); - unsigned long len = pci_resource_len(dev, bar); - unsigned long flags = pci_resource_flags(dev, bar); - - if (!len) - return NULL; - if (max && len > max) - len = max; - if (flags & IORESOURCE_IO) - return ioport_map(start, len); - if (flags & IORESOURCE_MEM) - return ioremap(start, len); - /* What? */ - return NULL; -} - -void pci_iounmap(struct pci_dev *dev, void __iomem *addr) -{ - /* Nothing to do */ -} -EXPORT_SYMBOL(pci_iomap); -EXPORT_SYMBOL(pci_iounmap); diff --git a/arch/ppc64/kernel/iommu.c b/arch/ppc64/kernel/iommu.c deleted file mode 100644 index 4d9b4388918b..000000000000 --- a/arch/ppc64/kernel/iommu.c +++ /dev/null @@ -1,572 +0,0 @@ -/* - * arch/ppc64/kernel/iommu.c - * Copyright (C) 2001 Mike Corrigan & Dave Engebretsen, IBM Corporation - * - * Rewrite, cleanup, new allocation schemes, virtual merging: - * Copyright (C) 2004 Olof Johansson, IBM Corporation - * and Ben. Herrenschmidt, IBM Corporation - * - * Dynamic DMA mapping support, bus-independent parts. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - - -#include <linux/config.h> -#include <linux/init.h> -#include <linux/types.h> -#include <linux/slab.h> -#include <linux/mm.h> -#include <linux/spinlock.h> -#include <linux/string.h> -#include <linux/dma-mapping.h> -#include <linux/init.h> -#include <linux/bitops.h> -#include <asm/io.h> -#include <asm/prom.h> -#include <asm/iommu.h> -#include <asm/pci-bridge.h> -#include <asm/machdep.h> - -#define DBG(...) - -#ifdef CONFIG_IOMMU_VMERGE -static int novmerge = 0; -#else -static int novmerge = 1; -#endif - -static int __init setup_iommu(char *str) -{ - if (!strcmp(str, "novmerge")) - novmerge = 1; - else if (!strcmp(str, "vmerge")) - novmerge = 0; - return 1; -} - -__setup("iommu=", setup_iommu); - -static unsigned long iommu_range_alloc(struct iommu_table *tbl, - unsigned long npages, - unsigned long *handle, - unsigned int align_order) -{ - unsigned long n, end, i, start; - unsigned long limit; - int largealloc = npages > 15; - int pass = 0; - unsigned long align_mask; - - align_mask = 0xffffffffffffffffl >> (64 - align_order); - - /* This allocator was derived from x86_64's bit string search */ - - /* Sanity check */ - if (unlikely(npages) == 0) { - if (printk_ratelimit()) - WARN_ON(1); - return DMA_ERROR_CODE; - } - - if (handle && *handle) - start = *handle; - else - start = largealloc ? tbl->it_largehint : tbl->it_hint; - - /* Use only half of the table for small allocs (15 pages or less) */ - limit = largealloc ? tbl->it_size : tbl->it_halfpoint; - - if (largealloc && start < tbl->it_halfpoint) - start = tbl->it_halfpoint; - - /* The case below can happen if we have a small segment appended - * to a large, or when the previous alloc was at the very end of - * the available space. If so, go back to the initial start. - */ - if (start >= limit) - start = largealloc ? tbl->it_largehint : tbl->it_hint; - - again: - - n = find_next_zero_bit(tbl->it_map, limit, start); - - /* Align allocation */ - n = (n + align_mask) & ~align_mask; - - end = n + npages; - - if (unlikely(end >= limit)) { - if (likely(pass < 2)) { - /* First failure, just rescan the half of the table. - * Second failure, rescan the other half of the table. - */ - start = (largealloc ^ pass) ? tbl->it_halfpoint : 0; - limit = pass ? tbl->it_size : limit; - pass++; - goto again; - } else { - /* Third failure, give up */ - return DMA_ERROR_CODE; - } - } - - for (i = n; i < end; i++) - if (test_bit(i, tbl->it_map)) { - start = i+1; - goto again; - } - - for (i = n; i < end; i++) - __set_bit(i, tbl->it_map); - - /* Bump the hint to a new block for small allocs. */ - if (largealloc) { - /* Don't bump to new block to avoid fragmentation */ - tbl->it_largehint = end; - } else { - /* Overflow will be taken care of at the next allocation */ - tbl->it_hint = (end + tbl->it_blocksize - 1) & - ~(tbl->it_blocksize - 1); - } - - /* Update handle for SG allocations */ - if (handle) - *handle = end; - - return n; -} - -static dma_addr_t iommu_alloc(struct iommu_table *tbl, void *page, - unsigned int npages, enum dma_data_direction direction, - unsigned int align_order) -{ - unsigned long entry, flags; - dma_addr_t ret = DMA_ERROR_CODE; - - spin_lock_irqsave(&(tbl->it_lock), flags); - - entry = iommu_range_alloc(tbl, npages, NULL, align_order); - - if (unlikely(entry == DMA_ERROR_CODE)) { - spin_unlock_irqrestore(&(tbl->it_lock), flags); - return DMA_ERROR_CODE; - } - - entry += tbl->it_offset; /* Offset into real TCE table */ - ret = entry << PAGE_SHIFT; /* Set the return dma address */ - - /* Put the TCEs in the HW table */ - ppc_md.tce_build(tbl, entry, npages, (unsigned long)page & PAGE_MASK, - direction); - - - /* Flush/invalidate TLB caches if necessary */ - if (ppc_md.tce_flush) - ppc_md.tce_flush(tbl); - - spin_unlock_irqrestore(&(tbl->it_lock), flags); - - /* Make sure updates are seen by hardware */ - mb(); - - return ret; -} - -static void __iommu_free(struct iommu_table *tbl, dma_addr_t dma_addr, - unsigned int npages) -{ - unsigned long entry, free_entry; - unsigned long i; - - entry = dma_addr >> PAGE_SHIFT; - free_entry = entry - tbl->it_offset; - - if (((free_entry + npages) > tbl->it_size) || - (entry < tbl->it_offset)) { - if (printk_ratelimit()) { - printk(KERN_INFO "iommu_free: invalid entry\n"); - printk(KERN_INFO "\tentry = 0x%lx\n", entry); - printk(KERN_INFO "\tdma_addr = 0x%lx\n", (u64)dma_addr); - printk(KERN_INFO "\tTable = 0x%lx\n", (u64)tbl); - printk(KERN_INFO "\tbus# = 0x%lx\n", (u64)tbl->it_busno); - printk(KERN_INFO "\tsize = 0x%lx\n", (u64)tbl->it_size); - printk(KERN_INFO "\tstartOff = 0x%lx\n", (u64)tbl->it_offset); - printk(KERN_INFO "\tindex = 0x%lx\n", (u64)tbl->it_index); - WARN_ON(1); - } - return; - } - - ppc_md.tce_free(tbl, entry, npages); - - for (i = 0; i < npages; i++) - __clear_bit(free_entry+i, tbl->it_map); -} - -static void iommu_free(struct iommu_table *tbl, dma_addr_t dma_addr, - unsigned int npages) -{ - unsigned long flags; - - spin_lock_irqsave(&(tbl->it_lock), flags); - - __iommu_free(tbl, dma_addr, npages); - - /* Make sure TLB cache is flushed if the HW needs it. We do - * not do an mb() here on purpose, it is not needed on any of - * the current platforms. - */ - if (ppc_md.tce_flush) - ppc_md.tce_flush(tbl); - - spin_unlock_irqrestore(&(tbl->it_lock), flags); -} - -int iommu_map_sg(struct device *dev, struct iommu_table *tbl, - struct scatterlist *sglist, int nelems, - enum dma_data_direction direction) -{ - dma_addr_t dma_next = 0, dma_addr; - unsigned long flags; - struct scatterlist *s, *outs, *segstart; - int outcount, incount; - unsigned long handle; - - BUG_ON(direction == DMA_NONE); - - if ((nelems == 0) || !tbl) - return 0; - - outs = s = segstart = &sglist[0]; - outcount = 1; - incount = nelems; - handle = 0; - - /* Init first segment length for backout at failure */ - outs->dma_length = 0; - - DBG("mapping %d elements:\n", nelems); - - spin_lock_irqsave(&(tbl->it_lock), flags); - - for (s = outs; nelems; nelems--, s++) { - unsigned long vaddr, npages, entry, slen; - - slen = s->length; - /* Sanity check */ - if (slen == 0) { - dma_next = 0; - continue; - } - /* Allocate iommu entries for that segment */ - vaddr = (unsigned long)page_address(s->page) + s->offset; - npages = PAGE_ALIGN(vaddr + slen) - (vaddr & PAGE_MASK); - npages >>= PAGE_SHIFT; - entry = iommu_range_alloc(tbl, npages, &handle, 0); - - DBG(" - vaddr: %lx, size: %lx\n", vaddr, slen); - - /* Handle failure */ - if (unlikely(entry == DMA_ERROR_CODE)) { - if (printk_ratelimit()) - printk(KERN_INFO "iommu_alloc failed, tbl %p vaddr %lx" - " npages %lx\n", tbl, vaddr, npages); - goto failure; - } - - /* Convert entry to a dma_addr_t */ - entry += tbl->it_offset; - dma_addr = entry << PAGE_SHIFT; - dma_addr |= s->offset; - - DBG(" - %lx pages, entry: %lx, dma_addr: %lx\n", - npages, entry, dma_addr); - - /* Insert into HW table */ - ppc_md.tce_build(tbl, entry, npages, vaddr & PAGE_MASK, direction); - - /* If we are in an open segment, try merging */ - if (segstart != s) { - DBG(" - trying merge...\n"); - /* We cannot merge if: - * - allocated dma_addr isn't contiguous to previous allocation - */ - if (novmerge || (dma_addr != dma_next)) { - /* Can't merge: create a new segment */ - segstart = s; - outcount++; outs++; - DBG(" can't merge, new segment.\n"); - } else { - outs->dma_length += s->length; - DBG(" merged, new len: %lx\n", outs->dma_length); - } - } - - if (segstart == s) { - /* This is a new segment, fill entries */ - DBG(" - filling new segment.\n"); - outs->dma_address = dma_addr; - outs->dma_length = slen; - } - - /* Calculate next page pointer for contiguous check */ - dma_next = dma_addr + slen; - - DBG(" - dma next is: %lx\n", dma_next); - } - - /* Flush/invalidate TLB caches if necessary */ - if (ppc_md.tce_flush) - ppc_md.tce_flush(tbl); - - spin_unlock_irqrestore(&(tbl->it_lock), flags); - - /* Make sure updates are seen by hardware */ - mb(); - - DBG("mapped %d elements:\n", outcount); - - /* For the sake of iommu_unmap_sg, we clear out the length in the - * next entry of the sglist if we didn't fill the list completely - */ - if (outcount < incount) { - outs++; - outs->dma_address = DMA_ERROR_CODE; - outs->dma_length = 0; - } - return outcount; - - failure: - for (s = &sglist[0]; s <= outs; s++) { - if (s->dma_length != 0) { - unsigned long vaddr, npages; - - vaddr = s->dma_address & PAGE_MASK; - npages = (PAGE_ALIGN(s->dma_address + s->dma_length) - vaddr) - >> PAGE_SHIFT; - __iommu_free(tbl, vaddr, npages); - } - } - spin_unlock_irqrestore(&(tbl->it_lock), flags); - return 0; -} - - -void iommu_unmap_sg(struct iommu_table *tbl, struct scatterlist *sglist, - int nelems, enum dma_data_direction direction) -{ - unsigned long flags; - - BUG_ON(direction == DMA_NONE); - - if (!tbl) - return; - - spin_lock_irqsave(&(tbl->it_lock), flags); - - while (nelems--) { - unsigned int npages; - dma_addr_t dma_handle = sglist->dma_address; - - if (sglist->dma_length == 0) - break; - npages = (PAGE_ALIGN(dma_handle + sglist->dma_length) - - (dma_handle & PAGE_MASK)) >> PAGE_SHIFT; - __iommu_free(tbl, dma_handle, npages); - sglist++; - } - - /* Flush/invalidate TLBs if necessary. As for iommu_free(), we - * do not do an mb() here, the affected platforms do not need it - * when freeing. - */ - if (ppc_md.tce_flush) - ppc_md.tce_flush(tbl); - - spin_unlock_irqrestore(&(tbl->it_lock), flags); -} - -/* - * Build a iommu_table structure. This contains a bit map which - * is used to manage allocation of the tce space. - */ -struct iommu_table *iommu_init_table(struct iommu_table *tbl) -{ - unsigned long sz; - static int welcomed = 0; - - /* Set aside 1/4 of the table for large allocations. */ - tbl->it_halfpoint = tbl->it_size * 3 / 4; - - /* number of bytes needed for the bitmap */ - sz = (tbl->it_size + 7) >> 3; - - tbl->it_map = (unsigned long *)__get_free_pages(GFP_ATOMIC, get_order(sz)); - if (!tbl->it_map) - panic("iommu_init_table: Can't allocate %ld bytes\n", sz); - - memset(tbl->it_map, 0, sz); - - tbl->it_hint = 0; - tbl->it_largehint = tbl->it_halfpoint; - spin_lock_init(&tbl->it_lock); - - /* Clear the hardware table in case firmware left allocations in it */ - ppc_md.tce_free(tbl, tbl->it_offset, tbl->it_size); - - if (!welcomed) { - printk(KERN_INFO "IOMMU table initialized, virtual merging %s\n", - novmerge ? "disabled" : "enabled"); - welcomed = 1; - } - - return tbl; -} - -void iommu_free_table(struct device_node *dn) -{ - struct pci_dn *pdn = dn->data; - struct iommu_table *tbl = pdn->iommu_table; - unsigned long bitmap_sz, i; - unsigned int order; - - if (!tbl || !tbl->it_map) { - printk(KERN_ERR "%s: expected TCE map for %s\n", __FUNCTION__, - dn->full_name); - return; - } - - /* verify that table contains no entries */ - /* it_size is in entries, and we're examining 64 at a time */ - for (i = 0; i < (tbl->it_size/64); i++) { - if (tbl->it_map[i] != 0) { - printk(KERN_WARNING "%s: Unexpected TCEs for %s\n", - __FUNCTION__, dn->full_name); - break; - } - } - - /* calculate bitmap size in bytes */ - bitmap_sz = (tbl->it_size + 7) / 8; - - /* free bitmap */ - order = get_order(bitmap_sz); - free_pages((unsigned long) tbl->it_map, order); - - /* free table */ - kfree(tbl); -} - -/* Creates TCEs for a user provided buffer. The user buffer must be - * contiguous real kernel storage (not vmalloc). The address of the buffer - * passed here is the kernel (virtual) address of the buffer. The buffer - * need not be page aligned, the dma_addr_t returned will point to the same - * byte within the page as vaddr. - */ -dma_addr_t iommu_map_single(struct iommu_table *tbl, void *vaddr, - size_t size, enum dma_data_direction direction) -{ - dma_addr_t dma_handle = DMA_ERROR_CODE; - unsigned long uaddr; - unsigned int npages; - - BUG_ON(direction == DMA_NONE); - - uaddr = (unsigned long)vaddr; - npages = PAGE_ALIGN(uaddr + size) - (uaddr & PAGE_MASK); - npages >>= PAGE_SHIFT; - - if (tbl) { - dma_handle = iommu_alloc(tbl, vaddr, npages, direction, 0); - if (dma_handle == DMA_ERROR_CODE) { - if (printk_ratelimit()) { - printk(KERN_INFO "iommu_alloc failed, " - "tbl %p vaddr %p npages %d\n", - tbl, vaddr, npages); - } - } else - dma_handle |= (uaddr & ~PAGE_MASK); - } - - return dma_handle; -} - -void iommu_unmap_single(struct iommu_table *tbl, dma_addr_t dma_handle, - size_t size, enum dma_data_direction direction) -{ - BUG_ON(direction == DMA_NONE); - - if (tbl) - iommu_free(tbl, dma_handle, (PAGE_ALIGN(dma_handle + size) - - (dma_handle & PAGE_MASK)) >> PAGE_SHIFT); -} - -/* Allocates a contiguous real buffer and creates mappings over it. - * Returns the virtual address of the buffer and sets dma_handle - * to the dma address (mapping) of the first page. - */ -void *iommu_alloc_coherent(struct iommu_table *tbl, size_t size, - dma_addr_t *dma_handle, gfp_t flag) -{ - void *ret = NULL; - dma_addr_t mapping; - unsigned int npages, order; - - size = PAGE_ALIGN(size); - npages = size >> PAGE_SHIFT; - order = get_order(size); - - /* - * Client asked for way too much space. This is checked later - * anyway. It is easier to debug here for the drivers than in - * the tce tables. - */ - if (order >= IOMAP_MAX_ORDER) { - printk("iommu_alloc_consistent size too large: 0x%lx\n", size); - return NULL; - } - - if (!tbl) - return NULL; - - /* Alloc enough pages (and possibly more) */ - ret = (void *)__get_free_pages(flag, order); - if (!ret) - return NULL; - memset(ret, 0, size); - - /* Set up tces to cover the allocated range */ - mapping = iommu_alloc(tbl, ret, npages, DMA_BIDIRECTIONAL, order); - if (mapping == DMA_ERROR_CODE) { - free_pages((unsigned long)ret, order); - ret = NULL; - } else - *dma_handle = mapping; - return ret; -} - -void iommu_free_coherent(struct iommu_table *tbl, size_t size, - void *vaddr, dma_addr_t dma_handle) -{ - unsigned int npages; - - if (tbl) { - size = PAGE_ALIGN(size); - npages = size >> PAGE_SHIFT; - iommu_free(tbl, dma_handle, npages); - free_pages((unsigned long)vaddr, get_order(size)); - } -} diff --git a/arch/ppc64/kernel/irq.c b/arch/ppc64/kernel/irq.c deleted file mode 100644 index 87474584033f..000000000000 --- a/arch/ppc64/kernel/irq.c +++ /dev/null @@ -1,519 +0,0 @@ -/* - * arch/ppc/kernel/irq.c - * - * Derived from arch/i386/kernel/irq.c - * Copyright (C) 1992 Linus Torvalds - * Adapted from arch/i386 by Gary Thomas - * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) - * Updated and modified by Cort Dougan (cort@cs.nmt.edu) - * Copyright (C) 1996 Cort Dougan - * Adapted for Power Macintosh by Paul Mackerras - * Copyright (C) 1996 Paul Mackerras (paulus@cs.anu.edu.au) - * Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk). - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - * This file contains the code used by various IRQ handling routines: - * asking for different IRQ's should be done through these routines - * instead of just grabbing them. Thus setups with different IRQ numbers - * shouldn't result in any weird surprises, and installing new handlers - * should be easier. - */ - -#include <linux/errno.h> -#include <linux/module.h> -#include <linux/threads.h> -#include <linux/kernel_stat.h> -#include <linux/signal.h> -#include <linux/sched.h> -#include <linux/ioport.h> -#include <linux/interrupt.h> -#include <linux/timex.h> -#include <linux/config.h> -#include <linux/init.h> -#include <linux/slab.h> -#include <linux/pci.h> -#include <linux/delay.h> -#include <linux/irq.h> -#include <linux/proc_fs.h> -#include <linux/random.h> -#include <linux/kallsyms.h> -#include <linux/profile.h> -#include <linux/bitops.h> - -#include <asm/uaccess.h> -#include <asm/system.h> -#include <asm/io.h> -#include <asm/pgtable.h> -#include <asm/irq.h> -#include <asm/cache.h> -#include <asm/prom.h> -#include <asm/ptrace.h> -#include <asm/iseries/it_lp_queue.h> -#include <asm/machdep.h> -#include <asm/paca.h> - -#ifdef CONFIG_SMP -extern void iSeries_smp_message_recv( struct pt_regs * ); -#endif - -extern irq_desc_t irq_desc[NR_IRQS]; -EXPORT_SYMBOL(irq_desc); - -int distribute_irqs = 1; -int __irq_offset_value; -int ppc_spurious_interrupts; -u64 ppc64_interrupt_controller; - -int show_interrupts(struct seq_file *p, void *v) -{ - int i = *(loff_t *) v, j; - struct irqaction * action; - irq_desc_t *desc; - unsigned long flags; - - if (i == 0) { - seq_printf(p, " "); - for (j=0; j<NR_CPUS; j++) { - if (cpu_online(j)) - seq_printf(p, "CPU%d ",j); - } - seq_putc(p, '\n'); - } - - if (i < NR_IRQS) { - desc = get_irq_desc(i); - spin_lock_irqsave(&desc->lock, flags); - action = desc->action; - if (!action || !action->handler) - goto skip; - seq_printf(p, "%3d: ", i); -#ifdef CONFIG_SMP - for (j = 0; j < NR_CPUS; j++) { - if (cpu_online(j)) - seq_printf(p, "%10u ", kstat_cpu(j).irqs[i]); - } -#else - seq_printf(p, "%10u ", kstat_irqs(i)); -#endif /* CONFIG_SMP */ - if (desc->handler) - seq_printf(p, " %s ", desc->handler->typename ); - else - seq_printf(p, " None "); - seq_printf(p, "%s", (desc->status & IRQ_LEVEL) ? "Level " : "Edge "); - seq_printf(p, " %s",action->name); - for (action=action->next; action; action = action->next) - seq_printf(p, ", %s", action->name); - seq_putc(p, '\n'); -skip: - spin_unlock_irqrestore(&desc->lock, flags); - } else if (i == NR_IRQS) - seq_printf(p, "BAD: %10u\n", ppc_spurious_interrupts); - return 0; -} - -#ifdef CONFIG_HOTPLUG_CPU -void fixup_irqs(cpumask_t map) -{ - unsigned int irq; - static int warned; - - for_each_irq(irq) { - cpumask_t mask; - - if (irq_desc[irq].status & IRQ_PER_CPU) - continue; - - cpus_and(mask, irq_affinity[irq], map); - if (any_online_cpu(mask) == NR_CPUS) { - printk("Breaking affinity for irq %i\n", irq); - mask = map; - } - if (irq_desc[irq].handler->set_affinity) - irq_desc[irq].handler->set_affinity(irq, mask); - else if (irq_desc[irq].action && !(warned++)) - printk("Cannot set affinity for irq %i\n", irq); - } - - local_irq_enable(); - mdelay(1); - local_irq_disable(); -} -#endif - -extern int noirqdebug; - -/* - * Eventually, this should take an array of interrupts and an array size - * so it can dispatch multiple interrupts. - */ -void ppc_irq_dispatch_handler(struct pt_regs *regs, int irq) -{ - int status; - struct irqaction *action; - int cpu = smp_processor_id(); - irq_desc_t *desc = get_irq_desc(irq); - irqreturn_t action_ret; -#ifdef CONFIG_IRQSTACKS - struct thread_info *curtp, *irqtp; -#endif - - kstat_cpu(cpu).irqs[irq]++; - - if (desc->status & IRQ_PER_CPU) { - /* no locking required for CPU-local interrupts: */ - ack_irq(irq); - action_ret = handle_IRQ_event(irq, regs, desc->action); - desc->handler->end(irq); - return; - } - - spin_lock(&desc->lock); - ack_irq(irq); - /* - REPLAY is when Linux resends an IRQ that was dropped earlier - WAITING is used by probe to mark irqs that are being tested - */ - status = desc->status & ~(IRQ_REPLAY | IRQ_WAITING); - status |= IRQ_PENDING; /* we _want_ to handle it */ - - /* - * If the IRQ is disabled for whatever reason, we cannot - * use the action we have. - */ - action = NULL; - if (likely(!(status & (IRQ_DISABLED | IRQ_INPROGRESS)))) { - action = desc->action; - if (!action || !action->handler) { - ppc_spurious_interrupts++; - printk(KERN_DEBUG "Unhandled interrupt %x, disabled\n", irq); - /* We can't call disable_irq here, it would deadlock */ - if (!desc->depth) - desc->depth = 1; - desc->status |= IRQ_DISABLED; - /* This is not a real spurrious interrupt, we - * have to eoi it, so we jump to out - */ - mask_irq(irq); - goto out; - } - status &= ~IRQ_PENDING; /* we commit to handling */ - status |= IRQ_INPROGRESS; /* we are handling it */ - } - desc->status = status; - - /* - * If there is no IRQ handler or it was disabled, exit early. - Since we set PENDING, if another processor is handling - a different instance of this same irq, the other processor - will take care of it. - */ - if (unlikely(!action)) - goto out; - - /* - * Edge triggered interrupts need to remember - * pending events. - * This applies to any hw interrupts that allow a second - * instance of the same irq to arrive while we are in do_IRQ - * or in the handler. But the code here only handles the _second_ - * instance of the irq, not the third or fourth. So it is mostly - * useful for irq hardware that does not mask cleanly in an - * SMP environment. - */ - for (;;) { - spin_unlock(&desc->lock); - -#ifdef CONFIG_IRQSTACKS - /* Switch to the irq stack to handle this */ - curtp = current_thread_info(); - irqtp = hardirq_ctx[smp_processor_id()]; - if (curtp != irqtp) { - irqtp->task = curtp->task; - irqtp->flags = 0; - action_ret = call_handle_IRQ_event(irq, regs, action, irqtp); - irqtp->task = NULL; - if (irqtp->flags) - set_bits(irqtp->flags, &curtp->flags); - } else -#endif - action_ret = handle_IRQ_event(irq, regs, action); - - spin_lock(&desc->lock); - if (!noirqdebug) - note_interrupt(irq, desc, action_ret, regs); - if (likely(!(desc->status & IRQ_PENDING))) - break; - desc->status &= ~IRQ_PENDING; - } -out: - desc->status &= ~IRQ_INPROGRESS; - /* - * The ->end() handler has to deal with interrupts which got - * disabled while the handler was running. - */ - if (desc->handler) { - if (desc->handler->end) - desc->handler->end(irq); - else if (desc->handler->enable) - desc->handler->enable(irq); - } - spin_unlock(&desc->lock); -} - -#ifdef CONFIG_PPC_ISERIES -void do_IRQ(struct pt_regs *regs) -{ - struct paca_struct *lpaca; - - irq_enter(); - -#ifdef CONFIG_DEBUG_STACKOVERFLOW - /* Debugging check for stack overflow: is there less than 2KB free? */ - { - long sp; - - sp = __get_SP() & (THREAD_SIZE-1); - - if (unlikely(sp < (sizeof(struct thread_info) + 2048))) { - printk("do_IRQ: stack overflow: %ld\n", - sp - sizeof(struct thread_info)); - dump_stack(); - } - } -#endif - - lpaca = get_paca(); -#ifdef CONFIG_SMP - if (lpaca->lppaca.int_dword.fields.ipi_cnt) { - lpaca->lppaca.int_dword.fields.ipi_cnt = 0; - iSeries_smp_message_recv(regs); - } -#endif /* CONFIG_SMP */ - if (hvlpevent_is_pending()) - process_hvlpevents(regs); - - irq_exit(); - - if (lpaca->lppaca.int_dword.fields.decr_int) { - lpaca->lppaca.int_dword.fields.decr_int = 0; - /* Signal a fake decrementer interrupt */ - timer_interrupt(regs); - } -} - -#else /* CONFIG_PPC_ISERIES */ - -void do_IRQ(struct pt_regs *regs) -{ - int irq; - - irq_enter(); - -#ifdef CONFIG_DEBUG_STACKOVERFLOW - /* Debugging check for stack overflow: is there less than 2KB free? */ - { - long sp; - - sp = __get_SP() & (THREAD_SIZE-1); - - if (unlikely(sp < (sizeof(struct thread_info) + 2048))) { - printk("do_IRQ: stack overflow: %ld\n", - sp - sizeof(struct thread_info)); - dump_stack(); - } - } -#endif - - irq = ppc_md.get_irq(regs); - - if (irq >= 0) - ppc_irq_dispatch_handler(regs, irq); - else - /* That's not SMP safe ... but who cares ? */ - ppc_spurious_interrupts++; - - irq_exit(); -} -#endif /* CONFIG_PPC_ISERIES */ - -void __init init_IRQ(void) -{ - static int once = 0; - - if (once) - return; - - once++; - - ppc_md.init_IRQ(); - irq_ctx_init(); -} - -#ifndef CONFIG_PPC_ISERIES -/* - * Virtual IRQ mapping code, used on systems with XICS interrupt controllers. - */ - -#define UNDEFINED_IRQ 0xffffffff -unsigned int virt_irq_to_real_map[NR_IRQS]; - -/* - * Don't use virtual irqs 0, 1, 2 for devices. - * The pcnet32 driver considers interrupt numbers < 2 to be invalid, - * and 2 is the XICS IPI interrupt. - * We limit virtual irqs to 17 less than NR_IRQS so that when we - * offset them by 16 (to reserve the first 16 for ISA interrupts) - * we don't end up with an interrupt number >= NR_IRQS. - */ -#define MIN_VIRT_IRQ 3 -#define MAX_VIRT_IRQ (NR_IRQS - NUM_ISA_INTERRUPTS - 1) -#define NR_VIRT_IRQS (MAX_VIRT_IRQ - MIN_VIRT_IRQ + 1) - -void -virt_irq_init(void) -{ - int i; - for (i = 0; i < NR_IRQS; i++) - virt_irq_to_real_map[i] = UNDEFINED_IRQ; -} - -/* Create a mapping for a real_irq if it doesn't already exist. - * Return the virtual irq as a convenience. - */ -int virt_irq_create_mapping(unsigned int real_irq) -{ - unsigned int virq, first_virq; - static int warned; - - if (ppc64_interrupt_controller == IC_OPEN_PIC) - return real_irq; /* no mapping for openpic (for now) */ - - if (ppc64_interrupt_controller == IC_CELL_PIC) - return real_irq; /* no mapping for iic either */ - - /* don't map interrupts < MIN_VIRT_IRQ */ - if (real_irq < MIN_VIRT_IRQ) { - virt_irq_to_real_map[real_irq] = real_irq; - return real_irq; - } - - /* map to a number between MIN_VIRT_IRQ and MAX_VIRT_IRQ */ - virq = real_irq; - if (virq > MAX_VIRT_IRQ) - virq = (virq % NR_VIRT_IRQS) + MIN_VIRT_IRQ; - - /* search for this number or a free slot */ - first_virq = virq; - while (virt_irq_to_real_map[virq] != UNDEFINED_IRQ) { - if (virt_irq_to_real_map[virq] == real_irq) - return virq; - if (++virq > MAX_VIRT_IRQ) - virq = MIN_VIRT_IRQ; - if (virq == first_virq) - goto nospace; /* oops, no free slots */ - } - - virt_irq_to_real_map[virq] = real_irq; - return virq; - - nospace: - if (!warned) { - printk(KERN_CRIT "Interrupt table is full\n"); - printk(KERN_CRIT "Increase NR_IRQS (currently %d) " - "in your kernel sources and rebuild.\n", NR_IRQS); - warned = 1; - } - return NO_IRQ; -} - -/* - * In most cases will get a hit on the very first slot checked in the - * virt_irq_to_real_map. Only when there are a large number of - * IRQs will this be expensive. - */ -unsigned int real_irq_to_virt_slowpath(unsigned int real_irq) -{ - unsigned int virq; - unsigned int first_virq; - - virq = real_irq; - - if (virq > MAX_VIRT_IRQ) - virq = (virq % NR_VIRT_IRQS) + MIN_VIRT_IRQ; - - first_virq = virq; - - do { - if (virt_irq_to_real_map[virq] == real_irq) - return virq; - - virq++; - - if (virq >= MAX_VIRT_IRQ) - virq = 0; - - } while (first_virq != virq); - - return NO_IRQ; - -} - -#endif /* CONFIG_PPC_ISERIES */ - -#ifdef CONFIG_IRQSTACKS -struct thread_info *softirq_ctx[NR_CPUS]; -struct thread_info *hardirq_ctx[NR_CPUS]; - -void irq_ctx_init(void) -{ - struct thread_info *tp; - int i; - - for_each_cpu(i) { - memset((void *)softirq_ctx[i], 0, THREAD_SIZE); - tp = softirq_ctx[i]; - tp->cpu = i; - tp->preempt_count = SOFTIRQ_OFFSET; - - memset((void *)hardirq_ctx[i], 0, THREAD_SIZE); - tp = hardirq_ctx[i]; - tp->cpu = i; - tp->preempt_count = HARDIRQ_OFFSET; - } -} - -void do_softirq(void) -{ - unsigned long flags; - struct thread_info *curtp, *irqtp; - - if (in_interrupt()) - return; - - local_irq_save(flags); - - if (local_softirq_pending()) { - curtp = current_thread_info(); - irqtp = softirq_ctx[smp_processor_id()]; - irqtp->task = curtp->task; - call_do_softirq(irqtp); - irqtp->task = NULL; - } - - local_irq_restore(flags); -} -EXPORT_SYMBOL(do_softirq); - -#endif /* CONFIG_IRQSTACKS */ - -static int __init setup_noirqdistrib(char *str) -{ - distribute_irqs = 0; - return 1; -} - -__setup("noirqdistrib", setup_noirqdistrib); diff --git a/arch/ppc64/kernel/kprobes.c b/arch/ppc64/kernel/kprobes.c deleted file mode 100644 index ed876a5178ae..000000000000 --- a/arch/ppc64/kernel/kprobes.c +++ /dev/null @@ -1,451 +0,0 @@ -/* - * Kernel Probes (KProbes) - * arch/ppc64/kernel/kprobes.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * - * Copyright (C) IBM Corporation, 2002, 2004 - * - * 2002-Oct Created by Vamsi Krishna S <vamsi_krishna@in.ibm.com> Kernel - * Probes initial implementation ( includes contributions from - * Rusty Russell). - * 2004-July Suparna Bhattacharya <suparna@in.ibm.com> added jumper probes - * interface to access function arguments. - * 2004-Nov Ananth N Mavinakayanahalli <ananth@in.ibm.com> kprobes port - * for PPC64 - */ - -#include <linux/config.h> -#include <linux/kprobes.h> -#include <linux/ptrace.h> -#include <linux/spinlock.h> -#include <linux/preempt.h> -#include <asm/cacheflush.h> -#include <asm/kdebug.h> -#include <asm/sstep.h> - -static DECLARE_MUTEX(kprobe_mutex); - -static struct kprobe *current_kprobe; -static unsigned long kprobe_status, kprobe_saved_msr; -static struct kprobe *kprobe_prev; -static unsigned long kprobe_status_prev, kprobe_saved_msr_prev; -static struct pt_regs jprobe_saved_regs; - -int __kprobes arch_prepare_kprobe(struct kprobe *p) -{ - int ret = 0; - kprobe_opcode_t insn = *p->addr; - - if ((unsigned long)p->addr & 0x03) { - printk("Attempt to register kprobe at an unaligned address\n"); - ret = -EINVAL; - } else if (IS_MTMSRD(insn) || IS_RFID(insn)) { - printk("Cannot register a kprobe on rfid or mtmsrd\n"); - ret = -EINVAL; - } - - /* insn must be on a special executable page on ppc64 */ - if (!ret) { - down(&kprobe_mutex); - p->ainsn.insn = get_insn_slot(); - up(&kprobe_mutex); - if (!p->ainsn.insn) - ret = -ENOMEM; - } - return ret; -} - -void __kprobes arch_copy_kprobe(struct kprobe *p) -{ - memcpy(p->ainsn.insn, p->addr, MAX_INSN_SIZE * sizeof(kprobe_opcode_t)); - p->opcode = *p->addr; -} - -void __kprobes arch_arm_kprobe(struct kprobe *p) -{ - *p->addr = BREAKPOINT_INSTRUCTION; - flush_icache_range((unsigned long) p->addr, - (unsigned long) p->addr + sizeof(kprobe_opcode_t)); -} - -void __kprobes arch_disarm_kprobe(struct kprobe *p) -{ - *p->addr = p->opcode; - flush_icache_range((unsigned long) p->addr, - (unsigned long) p->addr + sizeof(kprobe_opcode_t)); -} - -void __kprobes arch_remove_kprobe(struct kprobe *p) -{ - down(&kprobe_mutex); - free_insn_slot(p->ainsn.insn); - up(&kprobe_mutex); -} - -static inline void prepare_singlestep(struct kprobe *p, struct pt_regs *regs) -{ - kprobe_opcode_t insn = *p->ainsn.insn; - - regs->msr |= MSR_SE; - - /* single step inline if it is a trap variant */ - if (is_trap(insn)) - regs->nip = (unsigned long)p->addr; - else - regs->nip = (unsigned long)p->ainsn.insn; -} - -static inline void save_previous_kprobe(void) -{ - kprobe_prev = current_kprobe; - kprobe_status_prev = kprobe_status; - kprobe_saved_msr_prev = kprobe_saved_msr; -} - -static inline void restore_previous_kprobe(void) -{ - current_kprobe = kprobe_prev; - kprobe_status = kprobe_status_prev; - kprobe_saved_msr = kprobe_saved_msr_prev; -} - -void __kprobes arch_prepare_kretprobe(struct kretprobe *rp, - struct pt_regs *regs) -{ - struct kretprobe_instance *ri; - - if ((ri = get_free_rp_inst(rp)) != NULL) { - ri->rp = rp; - ri->task = current; - ri->ret_addr = (kprobe_opcode_t *)regs->link; - - /* Replace the return addr with trampoline addr */ - regs->link = (unsigned long)kretprobe_trampoline; - add_rp_inst(ri); - } else { - rp->nmissed++; - } -} - -static inline int kprobe_handler(struct pt_regs *regs) -{ - struct kprobe *p; - int ret = 0; - unsigned int *addr = (unsigned int *)regs->nip; - - /* Check we're not actually recursing */ - if (kprobe_running()) { - /* We *are* holding lock here, so this is safe. - Disarm the probe we just hit, and ignore it. */ - p = get_kprobe(addr); - if (p) { - kprobe_opcode_t insn = *p->ainsn.insn; - if (kprobe_status == KPROBE_HIT_SS && - is_trap(insn)) { - regs->msr &= ~MSR_SE; - regs->msr |= kprobe_saved_msr; - unlock_kprobes(); - goto no_kprobe; - } - /* We have reentered the kprobe_handler(), since - * another probe was hit while within the handler. - * We here save the original kprobes variables and - * just single step on the instruction of the new probe - * without calling any user handlers. - */ - save_previous_kprobe(); - current_kprobe = p; - kprobe_saved_msr = regs->msr; - p->nmissed++; - prepare_singlestep(p, regs); - kprobe_status = KPROBE_REENTER; - return 1; - } else { - p = current_kprobe; - if (p->break_handler && p->break_handler(p, regs)) { - goto ss_probe; - } - } - /* If it's not ours, can't be delete race, (we hold lock). */ - goto no_kprobe; - } - - lock_kprobes(); - p = get_kprobe(addr); - if (!p) { - unlock_kprobes(); - if (*addr != BREAKPOINT_INSTRUCTION) { - /* - * PowerPC has multiple variants of the "trap" - * instruction. If the current instruction is a - * trap variant, it could belong to someone else - */ - kprobe_opcode_t cur_insn = *addr; - if (is_trap(cur_insn)) - goto no_kprobe; - /* - * The breakpoint instruction was removed right - * after we hit it. Another cpu has removed - * either a probepoint or a debugger breakpoint - * at this address. In either case, no further - * handling of this interrupt is appropriate. - */ - ret = 1; - } - /* Not one of ours: let kernel handle it */ - goto no_kprobe; - } - - kprobe_status = KPROBE_HIT_ACTIVE; - current_kprobe = p; - kprobe_saved_msr = regs->msr; - if (p->pre_handler && p->pre_handler(p, regs)) - /* handler has already set things up, so skip ss setup */ - return 1; - -ss_probe: - prepare_singlestep(p, regs); - kprobe_status = KPROBE_HIT_SS; - /* - * This preempt_disable() matches the preempt_enable_no_resched() - * in post_kprobe_handler(). - */ - preempt_disable(); - return 1; - -no_kprobe: - return ret; -} - -/* - * Function return probe trampoline: - * - init_kprobes() establishes a probepoint here - * - When the probed function returns, this probe - * causes the handlers to fire - */ -void kretprobe_trampoline_holder(void) -{ - asm volatile(".global kretprobe_trampoline\n" - "kretprobe_trampoline:\n" - "nop\n"); -} - -/* - * Called when the probe at kretprobe trampoline is hit - */ -int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs) -{ - struct kretprobe_instance *ri = NULL; - struct hlist_head *head; - struct hlist_node *node, *tmp; - unsigned long orig_ret_address = 0; - unsigned long trampoline_address =(unsigned long)&kretprobe_trampoline; - - head = kretprobe_inst_table_head(current); - - /* - * It is possible to have multiple instances associated with a given - * task either because an multiple functions in the call path - * have a return probe installed on them, and/or more then one return - * return probe was registered for a target function. - * - * We can handle this because: - * - instances are always inserted at the head of the list - * - when multiple return probes are registered for the same - * function, the first instance's ret_addr will point to the - * real return address, and all the rest will point to - * kretprobe_trampoline - */ - hlist_for_each_entry_safe(ri, node, tmp, head, hlist) { - if (ri->task != current) - /* another task is sharing our hash bucket */ - continue; - - if (ri->rp && ri->rp->handler) - ri->rp->handler(ri, regs); - - orig_ret_address = (unsigned long)ri->ret_addr; - recycle_rp_inst(ri); - - if (orig_ret_address != trampoline_address) - /* - * This is the real return address. Any other - * instances associated with this task are for - * other calls deeper on the call stack - */ - break; - } - - BUG_ON(!orig_ret_address || (orig_ret_address == trampoline_address)); - regs->nip = orig_ret_address; - - unlock_kprobes(); - - /* - * By returning a non-zero value, we are telling - * kprobe_handler() that we have handled unlocking - * and re-enabling preemption. - */ - return 1; -} - -/* - * Called after single-stepping. p->addr is the address of the - * instruction whose first byte has been replaced by the "breakpoint" - * instruction. To avoid the SMP problems that can occur when we - * temporarily put back the original opcode to single-step, we - * single-stepped a copy of the instruction. The address of this - * copy is p->ainsn.insn. - */ -static void __kprobes resume_execution(struct kprobe *p, struct pt_regs *regs) -{ - int ret; - unsigned int insn = *p->ainsn.insn; - - regs->nip = (unsigned long)p->addr; - ret = emulate_step(regs, insn); - if (ret == 0) - regs->nip = (unsigned long)p->addr + 4; -} - -static inline int post_kprobe_handler(struct pt_regs *regs) -{ - if (!kprobe_running()) - return 0; - - if ((kprobe_status != KPROBE_REENTER) && current_kprobe->post_handler) { - kprobe_status = KPROBE_HIT_SSDONE; - current_kprobe->post_handler(current_kprobe, regs, 0); - } - - resume_execution(current_kprobe, regs); - regs->msr |= kprobe_saved_msr; - - /*Restore back the original saved kprobes variables and continue. */ - if (kprobe_status == KPROBE_REENTER) { - restore_previous_kprobe(); - goto out; - } - unlock_kprobes(); -out: - preempt_enable_no_resched(); - - /* - * if somebody else is singlestepping across a probe point, msr - * will have SE set, in which case, continue the remaining processing - * of do_debug, as if this is not a probe hit. - */ - if (regs->msr & MSR_SE) - return 0; - - return 1; -} - -/* Interrupts disabled, kprobe_lock held. */ -static inline int kprobe_fault_handler(struct pt_regs *regs, int trapnr) -{ - if (current_kprobe->fault_handler - && current_kprobe->fault_handler(current_kprobe, regs, trapnr)) - return 1; - - if (kprobe_status & KPROBE_HIT_SS) { - resume_execution(current_kprobe, regs); - regs->msr &= ~MSR_SE; - regs->msr |= kprobe_saved_msr; - - unlock_kprobes(); - preempt_enable_no_resched(); - } - return 0; -} - -/* - * Wrapper routine to for handling exceptions. - */ -int __kprobes kprobe_exceptions_notify(struct notifier_block *self, - unsigned long val, void *data) -{ - struct die_args *args = (struct die_args *)data; - int ret = NOTIFY_DONE; - - /* - * Interrupts are not disabled here. We need to disable - * preemption, because kprobe_running() uses smp_processor_id(). - */ - preempt_disable(); - switch (val) { - case DIE_BPT: - if (kprobe_handler(args->regs)) - ret = NOTIFY_STOP; - break; - case DIE_SSTEP: - if (post_kprobe_handler(args->regs)) - ret = NOTIFY_STOP; - break; - case DIE_PAGE_FAULT: - if (kprobe_running() && - kprobe_fault_handler(args->regs, args->trapnr)) - ret = NOTIFY_STOP; - break; - default: - break; - } - preempt_enable_no_resched(); - return ret; -} - -int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs) -{ - struct jprobe *jp = container_of(p, struct jprobe, kp); - - memcpy(&jprobe_saved_regs, regs, sizeof(struct pt_regs)); - - /* setup return addr to the jprobe handler routine */ - regs->nip = (unsigned long)(((func_descr_t *)jp->entry)->entry); - regs->gpr[2] = (unsigned long)(((func_descr_t *)jp->entry)->toc); - - return 1; -} - -void __kprobes jprobe_return(void) -{ - asm volatile("trap" ::: "memory"); -} - -void __kprobes jprobe_return_end(void) -{ -}; - -int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs) -{ - /* - * FIXME - we should ideally be validating that we got here 'cos - * of the "trap" in jprobe_return() above, before restoring the - * saved regs... - */ - memcpy(regs, &jprobe_saved_regs, sizeof(struct pt_regs)); - return 1; -} - -static struct kprobe trampoline_p = { - .addr = (kprobe_opcode_t *) &kretprobe_trampoline, - .pre_handler = trampoline_probe_handler -}; - -int __init arch_init_kprobes(void) -{ - return register_kprobe(&trampoline_p); -} diff --git a/arch/ppc64/kernel/lparcfg.c b/arch/ppc64/kernel/lparcfg.c deleted file mode 100644 index e86155770bbc..000000000000 --- a/arch/ppc64/kernel/lparcfg.c +++ /dev/null @@ -1,613 +0,0 @@ -/* - * PowerPC64 LPAR Configuration Information Driver - * - * Dave Engebretsen engebret@us.ibm.com - * Copyright (c) 2003 Dave Engebretsen - * Will Schmidt willschm@us.ibm.com - * SPLPAR updates, Copyright (c) 2003 Will Schmidt IBM Corporation. - * seq_file updates, Copyright (c) 2004 Will Schmidt IBM Corporation. - * Nathan Lynch nathanl@austin.ibm.com - * Added lparcfg_write, Copyright (C) 2004 Nathan Lynch IBM Corporation. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - * This driver creates a proc file at /proc/ppc64/lparcfg which contains - * keyword - value pairs that specify the configuration of the partition. - */ - -#include <linux/config.h> -#include <linux/module.h> -#include <linux/types.h> -#include <linux/errno.h> -#include <linux/proc_fs.h> -#include <linux/init.h> -#include <linux/seq_file.h> -#include <asm/uaccess.h> -#include <asm/iseries/hv_lp_config.h> -#include <asm/lppaca.h> -#include <asm/hvcall.h> -#include <asm/firmware.h> -#include <asm/rtas.h> -#include <asm/system.h> -#include <asm/time.h> -#include <asm/iseries/it_exp_vpd_panel.h> -#include <asm/prom.h> - -#define MODULE_VERS "1.6" -#define MODULE_NAME "lparcfg" - -/* #define LPARCFG_DEBUG */ - -/* find a better place for this function... */ -void log_plpar_hcall_return(unsigned long rc, char *tag) -{ - if (rc == 0) /* success, return */ - return; -/* check for null tag ? */ - if (rc == H_Hardware) - printk(KERN_INFO - "plpar-hcall (%s) failed with hardware fault\n", tag); - else if (rc == H_Function) - printk(KERN_INFO - "plpar-hcall (%s) failed; function not allowed\n", tag); - else if (rc == H_Authority) - printk(KERN_INFO - "plpar-hcall (%s) failed; not authorized to this function\n", - tag); - else if (rc == H_Parameter) - printk(KERN_INFO "plpar-hcall (%s) failed; Bad parameter(s)\n", - tag); - else - printk(KERN_INFO - "plpar-hcall (%s) failed with unexpected rc(0x%lx)\n", - tag, rc); - -} - -static struct proc_dir_entry *proc_ppc64_lparcfg; -#define LPARCFG_BUFF_SIZE 4096 - -#ifdef CONFIG_PPC_ISERIES - -/* - * For iSeries legacy systems, the PPA purr function is available from the - * emulated_time_base field in the paca. - */ -static unsigned long get_purr(void) -{ - unsigned long sum_purr = 0; - int cpu; - struct paca_struct *lpaca; - - for_each_cpu(cpu) { - lpaca = paca + cpu; - sum_purr += lpaca->lppaca.emulated_time_base; - -#ifdef PURR_DEBUG - printk(KERN_INFO "get_purr for cpu (%d) has value (%ld) \n", - cpu, lpaca->lppaca.emulated_time_base); -#endif - } - return sum_purr; -} - -#define lparcfg_write NULL - -/* - * Methods used to fetch LPAR data when running on an iSeries platform. - */ -static int lparcfg_data(struct seq_file *m, void *v) -{ - unsigned long pool_id, lp_index; - int shared, entitled_capacity, max_entitled_capacity; - int processors, max_processors; - struct paca_struct *lpaca = get_paca(); - unsigned long purr = get_purr(); - - seq_printf(m, "%s %s \n", MODULE_NAME, MODULE_VERS); - - shared = (int)(lpaca->lppaca_ptr->shared_proc); - seq_printf(m, "serial_number=%c%c%c%c%c%c%c\n", - e2a(xItExtVpdPanel.mfgID[2]), - e2a(xItExtVpdPanel.mfgID[3]), - e2a(xItExtVpdPanel.systemSerial[1]), - e2a(xItExtVpdPanel.systemSerial[2]), - e2a(xItExtVpdPanel.systemSerial[3]), - e2a(xItExtVpdPanel.systemSerial[4]), - e2a(xItExtVpdPanel.systemSerial[5])); - - seq_printf(m, "system_type=%c%c%c%c\n", - e2a(xItExtVpdPanel.machineType[0]), - e2a(xItExtVpdPanel.machineType[1]), - e2a(xItExtVpdPanel.machineType[2]), - e2a(xItExtVpdPanel.machineType[3])); - - lp_index = HvLpConfig_getLpIndex(); - seq_printf(m, "partition_id=%d\n", (int)lp_index); - - seq_printf(m, "system_active_processors=%d\n", - (int)HvLpConfig_getSystemPhysicalProcessors()); - - seq_printf(m, "system_potential_processors=%d\n", - (int)HvLpConfig_getSystemPhysicalProcessors()); - - processors = (int)HvLpConfig_getPhysicalProcessors(); - seq_printf(m, "partition_active_processors=%d\n", processors); - - max_processors = (int)HvLpConfig_getMaxPhysicalProcessors(); - seq_printf(m, "partition_potential_processors=%d\n", max_processors); - - if (shared) { - entitled_capacity = HvLpConfig_getSharedProcUnits(); - max_entitled_capacity = HvLpConfig_getMaxSharedProcUnits(); - } else { - entitled_capacity = processors * 100; - max_entitled_capacity = max_processors * 100; - } - seq_printf(m, "partition_entitled_capacity=%d\n", entitled_capacity); - - seq_printf(m, "partition_max_entitled_capacity=%d\n", - max_entitled_capacity); - - if (shared) { - pool_id = HvLpConfig_getSharedPoolIndex(); - seq_printf(m, "pool=%d\n", (int)pool_id); - seq_printf(m, "pool_capacity=%d\n", - (int)(HvLpConfig_getNumProcsInSharedPool(pool_id) * - 100)); - seq_printf(m, "purr=%ld\n", purr); - } - - seq_printf(m, "shared_processor_mode=%d\n", shared); - - return 0; -} -#endif /* CONFIG_PPC_ISERIES */ - -#ifdef CONFIG_PPC_PSERIES -/* - * Methods used to fetch LPAR data when running on a pSeries platform. - */ - -/* - * H_GET_PPP hcall returns info in 4 parms. - * entitled_capacity,unallocated_capacity, - * aggregation, resource_capability). - * - * R4 = Entitled Processor Capacity Percentage. - * R5 = Unallocated Processor Capacity Percentage. - * R6 (AABBCCDDEEFFGGHH). - * XXXX - reserved (0) - * XXXX - reserved (0) - * XXXX - Group Number - * XXXX - Pool Number. - * R7 (IIJJKKLLMMNNOOPP). - * XX - reserved. (0) - * XX - bit 0-6 reserved (0). bit 7 is Capped indicator. - * XX - variable processor Capacity Weight - * XX - Unallocated Variable Processor Capacity Weight. - * XXXX - Active processors in Physical Processor Pool. - * XXXX - Processors active on platform. - */ -static unsigned int h_get_ppp(unsigned long *entitled, - unsigned long *unallocated, - unsigned long *aggregation, - unsigned long *resource) -{ - unsigned long rc; - rc = plpar_hcall_4out(H_GET_PPP, 0, 0, 0, 0, entitled, unallocated, - aggregation, resource); - - log_plpar_hcall_return(rc, "H_GET_PPP"); - - return rc; -} - -static void h_pic(unsigned long *pool_idle_time, unsigned long *num_procs) -{ - unsigned long rc; - unsigned long dummy; - rc = plpar_hcall(H_PIC, 0, 0, 0, 0, pool_idle_time, num_procs, &dummy); - - log_plpar_hcall_return(rc, "H_PIC"); -} - -static unsigned long get_purr(void); - -/* Track sum of all purrs across all processors. This is used to further */ -/* calculate usage values by different applications */ - -static unsigned long get_purr(void) -{ - unsigned long sum_purr = 0; - int cpu; - struct cpu_usage *cu; - - for_each_cpu(cpu) { - cu = &per_cpu(cpu_usage_array, cpu); - sum_purr += cu->current_tb; - } - return sum_purr; -} - -#define SPLPAR_CHARACTERISTICS_TOKEN 20 -#define SPLPAR_MAXLENGTH 1026*(sizeof(char)) - -/* - * parse_system_parameter_string() - * Retrieve the potential_processors, max_entitled_capacity and friends - * through the get-system-parameter rtas call. Replace keyword strings as - * necessary. - */ -static void parse_system_parameter_string(struct seq_file *m) -{ - int call_status; - - char *local_buffer = kmalloc(SPLPAR_MAXLENGTH, GFP_KERNEL); - if (!local_buffer) { - printk(KERN_ERR "%s %s kmalloc failure at line %d \n", - __FILE__, __FUNCTION__, __LINE__); - return; - } - - spin_lock(&rtas_data_buf_lock); - memset(rtas_data_buf, 0, SPLPAR_MAXLENGTH); - call_status = rtas_call(rtas_token("ibm,get-system-parameter"), 3, 1, - NULL, - SPLPAR_CHARACTERISTICS_TOKEN, - __pa(rtas_data_buf)); - memcpy(local_buffer, rtas_data_buf, SPLPAR_MAXLENGTH); - spin_unlock(&rtas_data_buf_lock); - - if (call_status != 0) { - printk(KERN_INFO - "%s %s Error calling get-system-parameter (0x%x)\n", - __FILE__, __FUNCTION__, call_status); - } else { - int splpar_strlen; - int idx, w_idx; - char *workbuffer = kmalloc(SPLPAR_MAXLENGTH, GFP_KERNEL); - if (!workbuffer) { - printk(KERN_ERR "%s %s kmalloc failure at line %d \n", - __FILE__, __FUNCTION__, __LINE__); - kfree(local_buffer); - return; - } -#ifdef LPARCFG_DEBUG - printk(KERN_INFO "success calling get-system-parameter \n"); -#endif - splpar_strlen = local_buffer[0] * 16 + local_buffer[1]; - local_buffer += 2; /* step over strlen value */ - - memset(workbuffer, 0, SPLPAR_MAXLENGTH); - w_idx = 0; - idx = 0; - while ((*local_buffer) && (idx < splpar_strlen)) { - workbuffer[w_idx++] = local_buffer[idx++]; - if ((local_buffer[idx] == ',') - || (local_buffer[idx] == '\0')) { - workbuffer[w_idx] = '\0'; - if (w_idx) { - /* avoid the empty string */ - seq_printf(m, "%s\n", workbuffer); - } - memset(workbuffer, 0, SPLPAR_MAXLENGTH); - idx++; /* skip the comma */ - w_idx = 0; - } else if (local_buffer[idx] == '=') { - /* code here to replace workbuffer contents - with different keyword strings */ - if (0 == strcmp(workbuffer, "MaxEntCap")) { - strcpy(workbuffer, - "partition_max_entitled_capacity"); - w_idx = strlen(workbuffer); - } - if (0 == strcmp(workbuffer, "MaxPlatProcs")) { - strcpy(workbuffer, - "system_potential_processors"); - w_idx = strlen(workbuffer); - } - } - } - kfree(workbuffer); - local_buffer -= 2; /* back up over strlen value */ - } - kfree(local_buffer); -} - -static int lparcfg_count_active_processors(void); - -/* Return the number of processors in the system. - * This function reads through the device tree and counts - * the virtual processors, this does not include threads. - */ -static int lparcfg_count_active_processors(void) -{ - struct device_node *cpus_dn = NULL; - int count = 0; - - while ((cpus_dn = of_find_node_by_type(cpus_dn, "cpu"))) { -#ifdef LPARCFG_DEBUG - printk(KERN_ERR "cpus_dn %p \n", cpus_dn); -#endif - count++; - } - return count; -} - -static int lparcfg_data(struct seq_file *m, void *v) -{ - int partition_potential_processors; - int partition_active_processors; - struct device_node *rootdn; - const char *model = ""; - const char *system_id = ""; - unsigned int *lp_index_ptr, lp_index = 0; - struct device_node *rtas_node; - int *lrdrp; - - rootdn = find_path_device("/"); - if (rootdn) { - model = get_property(rootdn, "model", NULL); - system_id = get_property(rootdn, "system-id", NULL); - lp_index_ptr = (unsigned int *) - get_property(rootdn, "ibm,partition-no", NULL); - if (lp_index_ptr) - lp_index = *lp_index_ptr; - } - - seq_printf(m, "%s %s \n", MODULE_NAME, MODULE_VERS); - - seq_printf(m, "serial_number=%s\n", system_id); - - seq_printf(m, "system_type=%s\n", model); - - seq_printf(m, "partition_id=%d\n", (int)lp_index); - - rtas_node = find_path_device("/rtas"); - lrdrp = (int *)get_property(rtas_node, "ibm,lrdr-capacity", NULL); - - if (lrdrp == NULL) { - partition_potential_processors = systemcfg->processorCount; - } else { - partition_potential_processors = *(lrdrp + 4); - } - - partition_active_processors = lparcfg_count_active_processors(); - - if (firmware_has_feature(FW_FEATURE_SPLPAR)) { - unsigned long h_entitled, h_unallocated; - unsigned long h_aggregation, h_resource; - unsigned long pool_idle_time, pool_procs; - unsigned long purr; - - h_get_ppp(&h_entitled, &h_unallocated, &h_aggregation, - &h_resource); - - seq_printf(m, "R4=0x%lx\n", h_entitled); - seq_printf(m, "R5=0x%lx\n", h_unallocated); - seq_printf(m, "R6=0x%lx\n", h_aggregation); - seq_printf(m, "R7=0x%lx\n", h_resource); - - purr = get_purr(); - - /* this call handles the ibm,get-system-parameter contents */ - parse_system_parameter_string(m); - - seq_printf(m, "partition_entitled_capacity=%ld\n", h_entitled); - - seq_printf(m, "group=%ld\n", (h_aggregation >> 2 * 8) & 0xffff); - - seq_printf(m, "system_active_processors=%ld\n", - (h_resource >> 0 * 8) & 0xffff); - - /* pool related entries are apropriate for shared configs */ - if (paca[0].lppaca.shared_proc) { - - h_pic(&pool_idle_time, &pool_procs); - - seq_printf(m, "pool=%ld\n", - (h_aggregation >> 0 * 8) & 0xffff); - - /* report pool_capacity in percentage */ - seq_printf(m, "pool_capacity=%ld\n", - ((h_resource >> 2 * 8) & 0xffff) * 100); - - seq_printf(m, "pool_idle_time=%ld\n", pool_idle_time); - - seq_printf(m, "pool_num_procs=%ld\n", pool_procs); - } - - seq_printf(m, "unallocated_capacity_weight=%ld\n", - (h_resource >> 4 * 8) & 0xFF); - - seq_printf(m, "capacity_weight=%ld\n", - (h_resource >> 5 * 8) & 0xFF); - - seq_printf(m, "capped=%ld\n", (h_resource >> 6 * 8) & 0x01); - - seq_printf(m, "unallocated_capacity=%ld\n", h_unallocated); - - seq_printf(m, "purr=%ld\n", purr); - - } else { /* non SPLPAR case */ - - seq_printf(m, "system_active_processors=%d\n", - partition_potential_processors); - - seq_printf(m, "system_potential_processors=%d\n", - partition_potential_processors); - - seq_printf(m, "partition_max_entitled_capacity=%d\n", - partition_potential_processors * 100); - - seq_printf(m, "partition_entitled_capacity=%d\n", - partition_active_processors * 100); - } - - seq_printf(m, "partition_active_processors=%d\n", - partition_active_processors); - - seq_printf(m, "partition_potential_processors=%d\n", - partition_potential_processors); - - seq_printf(m, "shared_processor_mode=%d\n", paca[0].lppaca.shared_proc); - - return 0; -} - -/* - * Interface for changing system parameters (variable capacity weight - * and entitled capacity). Format of input is "param_name=value"; - * anything after value is ignored. Valid parameters at this time are - * "partition_entitled_capacity" and "capacity_weight". We use - * H_SET_PPP to alter parameters. - * - * This function should be invoked only on systems with - * FW_FEATURE_SPLPAR. - */ -static ssize_t lparcfg_write(struct file *file, const char __user * buf, - size_t count, loff_t * off) -{ - char *kbuf; - char *tmp; - u64 new_entitled, *new_entitled_ptr = &new_entitled; - u8 new_weight, *new_weight_ptr = &new_weight; - - unsigned long current_entitled; /* parameters for h_get_ppp */ - unsigned long dummy; - unsigned long resource; - u8 current_weight; - - ssize_t retval = -ENOMEM; - - kbuf = kmalloc(count, GFP_KERNEL); - if (!kbuf) - goto out; - - retval = -EFAULT; - if (copy_from_user(kbuf, buf, count)) - goto out; - - retval = -EINVAL; - kbuf[count - 1] = '\0'; - tmp = strchr(kbuf, '='); - if (!tmp) - goto out; - - *tmp++ = '\0'; - - if (!strcmp(kbuf, "partition_entitled_capacity")) { - char *endp; - *new_entitled_ptr = (u64) simple_strtoul(tmp, &endp, 10); - if (endp == tmp) - goto out; - new_weight_ptr = ¤t_weight; - } else if (!strcmp(kbuf, "capacity_weight")) { - char *endp; - *new_weight_ptr = (u8) simple_strtoul(tmp, &endp, 10); - if (endp == tmp) - goto out; - new_entitled_ptr = ¤t_entitled; - } else - goto out; - - /* Get our current parameters */ - retval = h_get_ppp(¤t_entitled, &dummy, &dummy, &resource); - if (retval) { - retval = -EIO; - goto out; - } - - current_weight = (resource >> 5 * 8) & 0xFF; - - pr_debug("%s: current_entitled = %lu, current_weight = %lu\n", - __FUNCTION__, current_entitled, current_weight); - - pr_debug("%s: new_entitled = %lu, new_weight = %lu\n", - __FUNCTION__, *new_entitled_ptr, *new_weight_ptr); - - retval = plpar_hcall_norets(H_SET_PPP, *new_entitled_ptr, - *new_weight_ptr); - - if (retval == H_Success || retval == H_Constrained) { - retval = count; - } else if (retval == H_Busy) { - retval = -EBUSY; - } else if (retval == H_Hardware) { - retval = -EIO; - } else if (retval == H_Parameter) { - retval = -EINVAL; - } else { - printk(KERN_WARNING "%s: received unknown hv return code %ld", - __FUNCTION__, retval); - retval = -EIO; - } - - out: - kfree(kbuf); - return retval; -} - -#endif /* CONFIG_PPC_PSERIES */ - -static int lparcfg_open(struct inode *inode, struct file *file) -{ - return single_open(file, lparcfg_data, NULL); -} - -struct file_operations lparcfg_fops = { - .owner = THIS_MODULE, - .read = seq_read, - .open = lparcfg_open, - .release = single_release, -}; - -int __init lparcfg_init(void) -{ - struct proc_dir_entry *ent; - mode_t mode = S_IRUSR | S_IRGRP | S_IROTH; - - /* Allow writing if we have FW_FEATURE_SPLPAR */ - if (firmware_has_feature(FW_FEATURE_SPLPAR)) { - lparcfg_fops.write = lparcfg_write; - mode |= S_IWUSR; - } - - ent = create_proc_entry("ppc64/lparcfg", mode, NULL); - if (ent) { - ent->proc_fops = &lparcfg_fops; - ent->data = kmalloc(LPARCFG_BUFF_SIZE, GFP_KERNEL); - if (!ent->data) { - printk(KERN_ERR - "Failed to allocate buffer for lparcfg\n"); - remove_proc_entry("lparcfg", ent->parent); - return -ENOMEM; - } - } else { - printk(KERN_ERR "Failed to create ppc64/lparcfg\n"); - return -EIO; - } - - proc_ppc64_lparcfg = ent; - return 0; -} - -void __exit lparcfg_cleanup(void) -{ - if (proc_ppc64_lparcfg) { - if (proc_ppc64_lparcfg->data) { - kfree(proc_ppc64_lparcfg->data); - } - remove_proc_entry("lparcfg", proc_ppc64_lparcfg->parent); - } -} - -module_init(lparcfg_init); -module_exit(lparcfg_cleanup); -MODULE_DESCRIPTION("Interface for LPAR configuration data"); -MODULE_AUTHOR("Dave Engebretsen"); -MODULE_LICENSE("GPL"); diff --git a/arch/ppc64/kernel/machine_kexec.c b/arch/ppc64/kernel/machine_kexec.c deleted file mode 100644 index ff8679f260f3..000000000000 --- a/arch/ppc64/kernel/machine_kexec.c +++ /dev/null @@ -1,306 +0,0 @@ -/* - * machine_kexec.c - handle transition of Linux booting another kernel - * - * Copyright (C) 2004-2005, IBM Corp. - * - * Created by: Milton D Miller II - * - * This source code is licensed under the GNU General Public License, - * Version 2. See the file COPYING for more details. - */ - - -#include <linux/cpumask.h> -#include <linux/kexec.h> -#include <linux/smp.h> -#include <linux/thread_info.h> -#include <linux/errno.h> - -#include <asm/page.h> -#include <asm/current.h> -#include <asm/machdep.h> -#include <asm/cacheflush.h> -#include <asm/paca.h> -#include <asm/mmu.h> -#include <asm/sections.h> /* _end */ -#include <asm/prom.h> - -#define HASH_GROUP_SIZE 0x80 /* size of each hash group, asm/mmu.h */ - -/* Have this around till we move it into crash specific file */ -note_buf_t crash_notes[NR_CPUS]; - -/* Dummy for now. Not sure if we need to have a crash shutdown in here - * and if what it will achieve. Letting it be now to compile the code - * in generic kexec environment - */ -void machine_crash_shutdown(struct pt_regs *regs) -{ - /* do nothing right now */ - /* smp_relase_cpus() if we want smp on panic kernel */ - /* cpu_irq_down to isolate us until we are ready */ -} - -int machine_kexec_prepare(struct kimage *image) -{ - int i; - unsigned long begin, end; /* limits of segment */ - unsigned long low, high; /* limits of blocked memory range */ - struct device_node *node; - unsigned long *basep; - unsigned int *sizep; - - if (!ppc_md.hpte_clear_all) - return -ENOENT; - - /* - * Since we use the kernel fault handlers and paging code to - * handle the virtual mode, we must make sure no destination - * overlaps kernel static data or bss. - */ - for (i = 0; i < image->nr_segments; i++) - if (image->segment[i].mem < __pa(_end)) - return -ETXTBSY; - - /* - * For non-LPAR, we absolutely can not overwrite the mmu hash - * table, since we are still using the bolted entries in it to - * do the copy. Check that here. - * - * It is safe if the end is below the start of the blocked - * region (end <= low), or if the beginning is after the - * end of the blocked region (begin >= high). Use the - * boolean identity !(a || b) === (!a && !b). - */ - if (htab_address) { - low = __pa(htab_address); - high = low + (htab_hash_mask + 1) * HASH_GROUP_SIZE; - - for (i = 0; i < image->nr_segments; i++) { - begin = image->segment[i].mem; - end = begin + image->segment[i].memsz; - - if ((begin < high) && (end > low)) - return -ETXTBSY; - } - } - - /* We also should not overwrite the tce tables */ - for (node = of_find_node_by_type(NULL, "pci"); node != NULL; - node = of_find_node_by_type(node, "pci")) { - basep = (unsigned long *)get_property(node, "linux,tce-base", - NULL); - sizep = (unsigned int *)get_property(node, "linux,tce-size", - NULL); - if (basep == NULL || sizep == NULL) - continue; - - low = *basep; - high = low + (*sizep); - - for (i = 0; i < image->nr_segments; i++) { - begin = image->segment[i].mem; - end = begin + image->segment[i].memsz; - - if ((begin < high) && (end > low)) - return -ETXTBSY; - } - } - - return 0; -} - -void machine_kexec_cleanup(struct kimage *image) -{ - /* we do nothing in prepare that needs to be undone */ -} - -#define IND_FLAGS (IND_DESTINATION | IND_INDIRECTION | IND_DONE | IND_SOURCE) - -static void copy_segments(unsigned long ind) -{ - unsigned long entry; - unsigned long *ptr; - void *dest; - void *addr; - - /* - * We rely on kexec_load to create a lists that properly - * initializes these pointers before they are used. - * We will still crash if the list is wrong, but at least - * the compiler will be quiet. - */ - ptr = NULL; - dest = NULL; - - for (entry = ind; !(entry & IND_DONE); entry = *ptr++) { - addr = __va(entry & PAGE_MASK); - - switch (entry & IND_FLAGS) { - case IND_DESTINATION: - dest = addr; - break; - case IND_INDIRECTION: - ptr = addr; - break; - case IND_SOURCE: - copy_page(dest, addr); - dest += PAGE_SIZE; - } - } -} - -void kexec_copy_flush(struct kimage *image) -{ - long i, nr_segments = image->nr_segments; - struct kexec_segment ranges[KEXEC_SEGMENT_MAX]; - - /* save the ranges on the stack to efficiently flush the icache */ - memcpy(ranges, image->segment, sizeof(ranges)); - - /* - * After this call we may not use anything allocated in dynamic - * memory, including *image. - * - * Only globals and the stack are allowed. - */ - copy_segments(image->head); - - /* - * we need to clear the icache for all dest pages sometime, - * including ones that were in place on the original copy - */ - for (i = 0; i < nr_segments; i++) - flush_icache_range(ranges[i].mem + KERNELBASE, - ranges[i].mem + KERNELBASE + - ranges[i].memsz); -} - -#ifdef CONFIG_SMP - -/* FIXME: we should schedule this function to be called on all cpus based - * on calling the interrupts, but we would like to call it off irq level - * so that the interrupt controller is clean. - */ -void kexec_smp_down(void *arg) -{ - if (ppc_md.cpu_irq_down) - ppc_md.cpu_irq_down(1); - - local_irq_disable(); - kexec_smp_wait(); - /* NOTREACHED */ -} - -static void kexec_prepare_cpus(void) -{ - int my_cpu, i, notified=-1; - - smp_call_function(kexec_smp_down, NULL, 0, /* wait */0); - my_cpu = get_cpu(); - - /* check the others cpus are now down (via paca hw cpu id == -1) */ - for (i=0; i < NR_CPUS; i++) { - if (i == my_cpu) - continue; - - while (paca[i].hw_cpu_id != -1) { - barrier(); - if (!cpu_possible(i)) { - printk("kexec: cpu %d hw_cpu_id %d is not" - " possible, ignoring\n", - i, paca[i].hw_cpu_id); - break; - } - if (!cpu_online(i)) { - /* Fixme: this can be spinning in - * pSeries_secondary_wait with a paca - * waiting for it to go online. - */ - printk("kexec: cpu %d hw_cpu_id %d is not" - " online, ignoring\n", - i, paca[i].hw_cpu_id); - break; - } - if (i != notified) { - printk( "kexec: waiting for cpu %d (physical" - " %d) to go down\n", - i, paca[i].hw_cpu_id); - notified = i; - } - } - } - - /* after we tell the others to go down */ - if (ppc_md.cpu_irq_down) - ppc_md.cpu_irq_down(0); - - put_cpu(); - - local_irq_disable(); -} - -#else /* ! SMP */ - -static void kexec_prepare_cpus(void) -{ - /* - * move the secondarys to us so that we can copy - * the new kernel 0-0x100 safely - * - * do this if kexec in setup.c ? - * - * We need to release the cpus if we are ever going from an - * UP to an SMP kernel. - */ - smp_release_cpus(); - if (ppc_md.cpu_irq_down) - ppc_md.cpu_irq_down(0); - local_irq_disable(); -} - -#endif /* SMP */ - -/* - * kexec thread structure and stack. - * - * We need to make sure that this is 16384-byte aligned due to the - * way process stacks are handled. It also must be statically allocated - * or allocated as part of the kimage, because everything else may be - * overwritten when we copy the kexec image. We piggyback on the - * "init_task" linker section here to statically allocate a stack. - * - * We could use a smaller stack if we don't care about anything using - * current, but that audit has not been performed. - */ -union thread_union kexec_stack - __attribute__((__section__(".data.init_task"))) = { }; - -/* Our assembly helper, in kexec_stub.S */ -extern NORET_TYPE void kexec_sequence(void *newstack, unsigned long start, - void *image, void *control, - void (*clear_all)(void)) ATTRIB_NORET; - -/* too late to fail here */ -void machine_kexec(struct kimage *image) -{ - - /* prepare control code if any */ - - /* shutdown other cpus into our wait loop and quiesce interrupts */ - kexec_prepare_cpus(); - - /* switch to a staticly allocated stack. Based on irq stack code. - * XXX: the task struct will likely be invalid once we do the copy! - */ - kexec_stack.thread_info.task = current_thread_info()->task; - kexec_stack.thread_info.flags = 0; - - /* Some things are best done in assembly. Finding globals with - * a toc is easier in C, so pass in what we can. - */ - kexec_sequence(&kexec_stack, image->start, image, - page_address(image->control_code_page), - ppc_md.hpte_clear_all); - /* NOTREACHED */ -} diff --git a/arch/ppc64/kernel/misc.S b/arch/ppc64/kernel/misc.S deleted file mode 100644 index 077507ffbab8..000000000000 --- a/arch/ppc64/kernel/misc.S +++ /dev/null @@ -1,869 +0,0 @@ -/* - * arch/ppc/kernel/misc.S - * - * - * - * This file contains miscellaneous low-level functions. - * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) - * - * Largely rewritten by Cort Dougan (cort@cs.nmt.edu) - * and Paul Mackerras. - * Adapted for iSeries by Mike Corrigan (mikejc@us.ibm.com) - * PPC64 updates by Dave Engebretsen (engebret@us.ibm.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - */ - -#include <linux/config.h> -#include <linux/sys.h> -#include <asm/unistd.h> -#include <asm/errno.h> -#include <asm/processor.h> -#include <asm/page.h> -#include <asm/cache.h> -#include <asm/ppc_asm.h> -#include <asm/asm-offsets.h> -#include <asm/cputable.h> -#include <asm/thread_info.h> - - .text - -/* - * Returns (address we were linked at) - (address we are running at) - * for use before the text and data are mapped to KERNELBASE. - */ - -_GLOBAL(reloc_offset) - mflr r0 - bl 1f -1: mflr r3 - LOADADDR(r4,1b) - sub r3,r4,r3 - mtlr r0 - blr - -_GLOBAL(get_msr) - mfmsr r3 - blr - -_GLOBAL(get_dar) - mfdar r3 - blr - -_GLOBAL(get_srr0) - mfsrr0 r3 - blr - -_GLOBAL(get_srr1) - mfsrr1 r3 - blr - -_GLOBAL(get_sp) - mr r3,r1 - blr - -#ifdef CONFIG_IRQSTACKS -_GLOBAL(call_do_softirq) - mflr r0 - std r0,16(r1) - stdu r1,THREAD_SIZE-112(r3) - mr r1,r3 - bl .__do_softirq - ld r1,0(r1) - ld r0,16(r1) - mtlr r0 - blr - -_GLOBAL(call_handle_IRQ_event) - mflr r0 - std r0,16(r1) - stdu r1,THREAD_SIZE-112(r6) - mr r1,r6 - bl .handle_IRQ_event - ld r1,0(r1) - ld r0,16(r1) - mtlr r0 - blr -#endif /* CONFIG_IRQSTACKS */ - - /* - * To be called by C code which needs to do some operations with MMU - * disabled. Note that interrupts have to be disabled by the caller - * prior to calling us. The code called _MUST_ be in the RMO of course - * and part of the linear mapping as we don't attempt to translate the - * stack pointer at all. The function is called with the stack switched - * to this CPU emergency stack - * - * prototype is void *call_with_mmu_off(void *func, void *data); - * - * the called function is expected to be of the form - * - * void *called(void *data); - */ -_GLOBAL(call_with_mmu_off) - mflr r0 /* get link, save it on stackframe */ - std r0,16(r1) - mr r1,r5 /* save old stack ptr */ - ld r1,PACAEMERGSP(r13) /* get emerg. stack */ - subi r1,r1,STACK_FRAME_OVERHEAD - std r0,16(r1) /* save link on emerg. stack */ - std r5,0(r1) /* save old stack ptr in backchain */ - ld r3,0(r3) /* get to real function ptr (assume same TOC) */ - bl 2f /* we need LR to return, continue at label 2 */ - - ld r0,16(r1) /* we return here from the call, get LR and */ - ld r1,0(r1) /* .. old stack ptr */ - mtspr SPRN_SRR0,r0 /* and get back to virtual mode with these */ - mfmsr r4 - ori r4,r4,MSR_IR|MSR_DR - mtspr SPRN_SRR1,r4 - rfid - -2: mtspr SPRN_SRR0,r3 /* coming from above, enter real mode */ - mr r3,r4 /* get parameter */ - mfmsr r0 - ori r0,r0,MSR_IR|MSR_DR - xori r0,r0,MSR_IR|MSR_DR - mtspr SPRN_SRR1,r0 - rfid - - - .section ".toc","aw" -PPC64_CACHES: - .tc ppc64_caches[TC],ppc64_caches - .section ".text" - -/* - * Write any modified data cache blocks out to memory - * and invalidate the corresponding instruction cache blocks. - * - * flush_icache_range(unsigned long start, unsigned long stop) - * - * flush all bytes from start through stop-1 inclusive - */ - -_KPROBE(__flush_icache_range) - -/* - * Flush the data cache to memory - * - * Different systems have different cache line sizes - * and in some cases i-cache and d-cache line sizes differ from - * each other. - */ - ld r10,PPC64_CACHES@toc(r2) - lwz r7,DCACHEL1LINESIZE(r10)/* Get cache line size */ - addi r5,r7,-1 - andc r6,r3,r5 /* round low to line bdy */ - subf r8,r6,r4 /* compute length */ - add r8,r8,r5 /* ensure we get enough */ - lwz r9,DCACHEL1LOGLINESIZE(r10) /* Get log-2 of cache line size */ - srw. r8,r8,r9 /* compute line count */ - beqlr /* nothing to do? */ - mtctr r8 -1: dcbst 0,r6 - add r6,r6,r7 - bdnz 1b - sync - -/* Now invalidate the instruction cache */ - - lwz r7,ICACHEL1LINESIZE(r10) /* Get Icache line size */ - addi r5,r7,-1 - andc r6,r3,r5 /* round low to line bdy */ - subf r8,r6,r4 /* compute length */ - add r8,r8,r5 - lwz r9,ICACHEL1LOGLINESIZE(r10) /* Get log-2 of Icache line size */ - srw. r8,r8,r9 /* compute line count */ - beqlr /* nothing to do? */ - mtctr r8 -2: icbi 0,r6 - add r6,r6,r7 - bdnz 2b - isync - blr - .previous .text -/* - * Like above, but only do the D-cache. - * - * flush_dcache_range(unsigned long start, unsigned long stop) - * - * flush all bytes from start to stop-1 inclusive - */ -_GLOBAL(flush_dcache_range) - -/* - * Flush the data cache to memory - * - * Different systems have different cache line sizes - */ - ld r10,PPC64_CACHES@toc(r2) - lwz r7,DCACHEL1LINESIZE(r10) /* Get dcache line size */ - addi r5,r7,-1 - andc r6,r3,r5 /* round low to line bdy */ - subf r8,r6,r4 /* compute length */ - add r8,r8,r5 /* ensure we get enough */ - lwz r9,DCACHEL1LOGLINESIZE(r10) /* Get log-2 of dcache line size */ - srw. r8,r8,r9 /* compute line count */ - beqlr /* nothing to do? */ - mtctr r8 -0: dcbst 0,r6 - add r6,r6,r7 - bdnz 0b - sync - blr - -/* - * Like above, but works on non-mapped physical addresses. - * Use only for non-LPAR setups ! It also assumes real mode - * is cacheable. Used for flushing out the DART before using - * it as uncacheable memory - * - * flush_dcache_phys_range(unsigned long start, unsigned long stop) - * - * flush all bytes from start to stop-1 inclusive - */ -_GLOBAL(flush_dcache_phys_range) - ld r10,PPC64_CACHES@toc(r2) - lwz r7,DCACHEL1LINESIZE(r10) /* Get dcache line size */ - addi r5,r7,-1 - andc r6,r3,r5 /* round low to line bdy */ - subf r8,r6,r4 /* compute length */ - add r8,r8,r5 /* ensure we get enough */ - lwz r9,DCACHEL1LOGLINESIZE(r10) /* Get log-2 of dcache line size */ - srw. r8,r8,r9 /* compute line count */ - beqlr /* nothing to do? */ - mfmsr r5 /* Disable MMU Data Relocation */ - ori r0,r5,MSR_DR - xori r0,r0,MSR_DR - sync - mtmsr r0 - sync - isync - mtctr r8 -0: dcbst 0,r6 - add r6,r6,r7 - bdnz 0b - sync - isync - mtmsr r5 /* Re-enable MMU Data Relocation */ - sync - isync - blr - -_GLOBAL(flush_inval_dcache_range) - ld r10,PPC64_CACHES@toc(r2) - lwz r7,DCACHEL1LINESIZE(r10) /* Get dcache line size */ - addi r5,r7,-1 - andc r6,r3,r5 /* round low to line bdy */ - subf r8,r6,r4 /* compute length */ - add r8,r8,r5 /* ensure we get enough */ - lwz r9,DCACHEL1LOGLINESIZE(r10)/* Get log-2 of dcache line size */ - srw. r8,r8,r9 /* compute line count */ - beqlr /* nothing to do? */ - sync - isync - mtctr r8 -0: dcbf 0,r6 - add r6,r6,r7 - bdnz 0b - sync - isync - blr - - -/* - * Flush a particular page from the data cache to RAM. - * Note: this is necessary because the instruction cache does *not* - * snoop from the data cache. - * - * void __flush_dcache_icache(void *page) - */ -_GLOBAL(__flush_dcache_icache) -/* - * Flush the data cache to memory - * - * Different systems have different cache line sizes - */ - -/* Flush the dcache */ - ld r7,PPC64_CACHES@toc(r2) - clrrdi r3,r3,PAGE_SHIFT /* Page align */ - lwz r4,DCACHEL1LINESPERPAGE(r7) /* Get # dcache lines per page */ - lwz r5,DCACHEL1LINESIZE(r7) /* Get dcache line size */ - mr r6,r3 - mtctr r4 -0: dcbst 0,r6 - add r6,r6,r5 - bdnz 0b - sync - -/* Now invalidate the icache */ - - lwz r4,ICACHEL1LINESPERPAGE(r7) /* Get # icache lines per page */ - lwz r5,ICACHEL1LINESIZE(r7) /* Get icache line size */ - mtctr r4 -1: icbi 0,r3 - add r3,r3,r5 - bdnz 1b - isync - blr - -/* - * I/O string operations - * - * insb(port, buf, len) - * outsb(port, buf, len) - * insw(port, buf, len) - * outsw(port, buf, len) - * insl(port, buf, len) - * outsl(port, buf, len) - * insw_ns(port, buf, len) - * outsw_ns(port, buf, len) - * insl_ns(port, buf, len) - * outsl_ns(port, buf, len) - * - * The *_ns versions don't do byte-swapping. - */ -_GLOBAL(_insb) - cmpwi 0,r5,0 - mtctr r5 - subi r4,r4,1 - blelr- -00: lbz r5,0(r3) - eieio - stbu r5,1(r4) - bdnz 00b - twi 0,r5,0 - isync - blr - -_GLOBAL(_outsb) - cmpwi 0,r5,0 - mtctr r5 - subi r4,r4,1 - blelr- -00: lbzu r5,1(r4) - stb r5,0(r3) - bdnz 00b - sync - blr - -_GLOBAL(_insw) - cmpwi 0,r5,0 - mtctr r5 - subi r4,r4,2 - blelr- -00: lhbrx r5,0,r3 - eieio - sthu r5,2(r4) - bdnz 00b - twi 0,r5,0 - isync - blr - -_GLOBAL(_outsw) - cmpwi 0,r5,0 - mtctr r5 - subi r4,r4,2 - blelr- -00: lhzu r5,2(r4) - sthbrx r5,0,r3 - bdnz 00b - sync - blr - -_GLOBAL(_insl) - cmpwi 0,r5,0 - mtctr r5 - subi r4,r4,4 - blelr- -00: lwbrx r5,0,r3 - eieio - stwu r5,4(r4) - bdnz 00b - twi 0,r5,0 - isync - blr - -_GLOBAL(_outsl) - cmpwi 0,r5,0 - mtctr r5 - subi r4,r4,4 - blelr- -00: lwzu r5,4(r4) - stwbrx r5,0,r3 - bdnz 00b - sync - blr - -/* _GLOBAL(ide_insw) now in drivers/ide/ide-iops.c */ -_GLOBAL(_insw_ns) - cmpwi 0,r5,0 - mtctr r5 - subi r4,r4,2 - blelr- -00: lhz r5,0(r3) - eieio - sthu r5,2(r4) - bdnz 00b - twi 0,r5,0 - isync - blr - -/* _GLOBAL(ide_outsw) now in drivers/ide/ide-iops.c */ -_GLOBAL(_outsw_ns) - cmpwi 0,r5,0 - mtctr r5 - subi r4,r4,2 - blelr- -00: lhzu r5,2(r4) - sth r5,0(r3) - bdnz 00b - sync - blr - -_GLOBAL(_insl_ns) - cmpwi 0,r5,0 - mtctr r5 - subi r4,r4,4 - blelr- -00: lwz r5,0(r3) - eieio - stwu r5,4(r4) - bdnz 00b - twi 0,r5,0 - isync - blr - -_GLOBAL(_outsl_ns) - cmpwi 0,r5,0 - mtctr r5 - subi r4,r4,4 - blelr- -00: lwzu r5,4(r4) - stw r5,0(r3) - bdnz 00b - sync - blr - -/* - * identify_cpu and calls setup_cpu - * In: r3 = base of the cpu_specs array - * r4 = address of cur_cpu_spec - * r5 = relocation offset - */ -_GLOBAL(identify_cpu) - mfpvr r7 -1: - lwz r8,CPU_SPEC_PVR_MASK(r3) - and r8,r8,r7 - lwz r9,CPU_SPEC_PVR_VALUE(r3) - cmplw 0,r9,r8 - beq 1f - addi r3,r3,CPU_SPEC_ENTRY_SIZE - b 1b -1: - add r0,r3,r5 - std r0,0(r4) - ld r4,CPU_SPEC_SETUP(r3) - sub r4,r4,r5 - ld r4,0(r4) - sub r4,r4,r5 - mtctr r4 - /* Calling convention for cpu setup is r3=offset, r4=cur_cpu_spec */ - mr r4,r3 - mr r3,r5 - bctr - -/* - * do_cpu_ftr_fixups - goes through the list of CPU feature fixups - * and writes nop's over sections of code that don't apply for this cpu. - * r3 = data offset (not changed) - */ -_GLOBAL(do_cpu_ftr_fixups) - /* Get CPU 0 features */ - LOADADDR(r6,cur_cpu_spec) - sub r6,r6,r3 - ld r4,0(r6) - sub r4,r4,r3 - ld r4,CPU_SPEC_FEATURES(r4) - /* Get the fixup table */ - LOADADDR(r6,__start___ftr_fixup) - sub r6,r6,r3 - LOADADDR(r7,__stop___ftr_fixup) - sub r7,r7,r3 - /* Do the fixup */ -1: cmpld r6,r7 - bgelr - addi r6,r6,32 - ld r8,-32(r6) /* mask */ - and r8,r8,r4 - ld r9,-24(r6) /* value */ - cmpld r8,r9 - beq 1b - ld r8,-16(r6) /* section begin */ - ld r9,-8(r6) /* section end */ - subf. r9,r8,r9 - beq 1b - /* write nops over the section of code */ - /* todo: if large section, add a branch at the start of it */ - srwi r9,r9,2 - mtctr r9 - sub r8,r8,r3 - lis r0,0x60000000@h /* nop */ -3: stw r0,0(r8) - andi. r10,r4,CPU_FTR_SPLIT_ID_CACHE@l - beq 2f - dcbst 0,r8 /* suboptimal, but simpler */ - sync - icbi 0,r8 -2: addi r8,r8,4 - bdnz 3b - sync /* additional sync needed on g4 */ - isync - b 1b - -#if defined(CONFIG_PPC_PMAC) || defined(CONFIG_PPC_MAPLE) -/* - * Do an IO access in real mode - */ -_GLOBAL(real_readb) - mfmsr r7 - ori r0,r7,MSR_DR - xori r0,r0,MSR_DR - sync - mtmsrd r0 - sync - isync - mfspr r6,SPRN_HID4 - rldicl r5,r6,32,0 - ori r5,r5,0x100 - rldicl r5,r5,32,0 - sync - mtspr SPRN_HID4,r5 - isync - slbia - isync - lbz r3,0(r3) - sync - mtspr SPRN_HID4,r6 - isync - slbia - isync - mtmsrd r7 - sync - isync - blr - - /* - * Do an IO access in real mode - */ -_GLOBAL(real_writeb) - mfmsr r7 - ori r0,r7,MSR_DR - xori r0,r0,MSR_DR - sync - mtmsrd r0 - sync - isync - mfspr r6,SPRN_HID4 - rldicl r5,r6,32,0 - ori r5,r5,0x100 - rldicl r5,r5,32,0 - sync - mtspr SPRN_HID4,r5 - isync - slbia - isync - stb r3,0(r4) - sync - mtspr SPRN_HID4,r6 - isync - slbia - isync - mtmsrd r7 - sync - isync - blr -#endif /* defined(CONFIG_PPC_PMAC) || defined(CONFIG_PPC_MAPLE) */ - -/* - * Create a kernel thread - * kernel_thread(fn, arg, flags) - */ -_GLOBAL(kernel_thread) - std r29,-24(r1) - std r30,-16(r1) - stdu r1,-STACK_FRAME_OVERHEAD(r1) - mr r29,r3 - mr r30,r4 - ori r3,r5,CLONE_VM /* flags */ - oris r3,r3,(CLONE_UNTRACED>>16) - li r4,0 /* new sp (unused) */ - li r0,__NR_clone - sc - cmpdi 0,r3,0 /* parent or child? */ - bne 1f /* return if parent */ - li r0,0 - stdu r0,-STACK_FRAME_OVERHEAD(r1) - ld r2,8(r29) - ld r29,0(r29) - mtlr r29 /* fn addr in lr */ - mr r3,r30 /* load arg and call fn */ - blrl - li r0,__NR_exit /* exit after child exits */ - li r3,0 - sc -1: addi r1,r1,STACK_FRAME_OVERHEAD - ld r29,-24(r1) - ld r30,-16(r1) - blr - -/* - * disable_kernel_fp() - * Disable the FPU. - */ -_GLOBAL(disable_kernel_fp) - mfmsr r3 - rldicl r0,r3,(63-MSR_FP_LG),1 - rldicl r3,r0,(MSR_FP_LG+1),0 - mtmsrd r3 /* disable use of fpu now */ - isync - blr - -#ifdef CONFIG_ALTIVEC - -#if 0 /* this has no callers for now */ -/* - * disable_kernel_altivec() - * Disable the VMX. - */ -_GLOBAL(disable_kernel_altivec) - mfmsr r3 - rldicl r0,r3,(63-MSR_VEC_LG),1 - rldicl r3,r0,(MSR_VEC_LG+1),0 - mtmsrd r3 /* disable use of VMX now */ - isync - blr -#endif /* 0 */ - -/* - * giveup_altivec(tsk) - * Disable VMX for the task given as the argument, - * and save the vector registers in its thread_struct. - * Enables the VMX for use in the kernel on return. - */ -_GLOBAL(giveup_altivec) - mfmsr r5 - oris r5,r5,MSR_VEC@h - mtmsrd r5 /* enable use of VMX now */ - isync - cmpdi 0,r3,0 - beqlr- /* if no previous owner, done */ - addi r3,r3,THREAD /* want THREAD of task */ - ld r5,PT_REGS(r3) - cmpdi 0,r5,0 - SAVE_32VRS(0,r4,r3) - mfvscr vr0 - li r4,THREAD_VSCR - stvx vr0,r4,r3 - beq 1f - ld r4,_MSR-STACK_FRAME_OVERHEAD(r5) - lis r3,MSR_VEC@h - andc r4,r4,r3 /* disable FP for previous task */ - std r4,_MSR-STACK_FRAME_OVERHEAD(r5) -1: -#ifndef CONFIG_SMP - li r5,0 - ld r4,last_task_used_altivec@got(r2) - std r5,0(r4) -#endif /* CONFIG_SMP */ - blr - -#endif /* CONFIG_ALTIVEC */ - -_GLOBAL(__setup_cpu_power3) - blr - -_GLOBAL(execve) - li r0,__NR_execve - sc - bnslr - neg r3,r3 - blr - -/* kexec_wait(phys_cpu) - * - * wait for the flag to change, indicating this kernel is going away but - * the slave code for the next one is at addresses 0 to 100. - * - * This is used by all slaves. - * - * Physical (hardware) cpu id should be in r3. - */ -_GLOBAL(kexec_wait) - bl 1f -1: mflr r5 - addi r5,r5,kexec_flag-1b - -99: HMT_LOW -#ifdef CONFIG_KEXEC /* use no memory without kexec */ - lwz r4,0(r5) - cmpwi 0,r4,0 - bnea 0x60 -#endif - b 99b - -/* this can be in text because we won't change it until we are - * running in real anyways - */ -kexec_flag: - .long 0 - - -#ifdef CONFIG_KEXEC - -/* kexec_smp_wait(void) - * - * call with interrupts off - * note: this is a terminal routine, it does not save lr - * - * get phys id from paca - * set paca id to -1 to say we got here - * switch to real mode - * join other cpus in kexec_wait(phys_id) - */ -_GLOBAL(kexec_smp_wait) - lhz r3,PACAHWCPUID(r13) - li r4,-1 - sth r4,PACAHWCPUID(r13) /* let others know we left */ - bl real_mode - b .kexec_wait - -/* - * switch to real mode (turn mmu off) - * we use the early kernel trick that the hardware ignores bits - * 0 and 1 (big endian) of the effective address in real mode - * - * don't overwrite r3 here, it is live for kexec_wait above. - */ -real_mode: /* assume normal blr return */ -1: li r9,MSR_RI - li r10,MSR_DR|MSR_IR - mflr r11 /* return address to SRR0 */ - mfmsr r12 - andc r9,r12,r9 - andc r10,r12,r10 - - mtmsrd r9,1 - mtspr SPRN_SRR1,r10 - mtspr SPRN_SRR0,r11 - rfid - - -/* - * kexec_sequence(newstack, start, image, control, clear_all()) - * - * does the grungy work with stack switching and real mode switches - * also does simple calls to other code - */ - -_GLOBAL(kexec_sequence) - mflr r0 - std r0,16(r1) - - /* switch stacks to newstack -- &kexec_stack.stack */ - stdu r1,THREAD_SIZE-112(r3) - mr r1,r3 - - li r0,0 - std r0,16(r1) - - /* save regs for local vars on new stack. - * yes, we won't go back, but ... - */ - std r31,-8(r1) - std r30,-16(r1) - std r29,-24(r1) - std r28,-32(r1) - std r27,-40(r1) - std r26,-48(r1) - std r25,-56(r1) - - stdu r1,-112-64(r1) - - /* save args into preserved regs */ - mr r31,r3 /* newstack (both) */ - mr r30,r4 /* start (real) */ - mr r29,r5 /* image (virt) */ - mr r28,r6 /* control, unused */ - mr r27,r7 /* clear_all() fn desc */ - mr r26,r8 /* spare */ - lhz r25,PACAHWCPUID(r13) /* get our phys cpu from paca */ - - /* disable interrupts, we are overwriting kernel data next */ - mfmsr r3 - rlwinm r3,r3,0,17,15 - mtmsrd r3,1 - - /* copy dest pages, flush whole dest image */ - mr r3,r29 - bl .kexec_copy_flush /* (image) */ - - /* turn off mmu */ - bl real_mode - - /* clear out hardware hash page table and tlb */ - ld r5,0(r27) /* deref function descriptor */ - mtctr r5 - bctrl /* ppc_md.hash_clear_all(void); */ - -/* - * kexec image calling is: - * the first 0x100 bytes of the entry point are copied to 0 - * - * all slaves branch to slave = 0x60 (absolute) - * slave(phys_cpu_id); - * - * master goes to start = entry point - * start(phys_cpu_id, start, 0); - * - * - * a wrapper is needed to call existing kernels, here is an approximate - * description of one method: - * - * v2: (2.6.10) - * start will be near the boot_block (maybe 0x100 bytes before it?) - * it will have a 0x60, which will b to boot_block, where it will wait - * and 0 will store phys into struct boot-block and load r3 from there, - * copy kernel 0-0x100 and tell slaves to back down to 0x60 again - * - * v1: (2.6.9) - * boot block will have all cpus scanning device tree to see if they - * are the boot cpu ????? - * other device tree differences (prop sizes, va vs pa, etc)... - */ - - /* copy 0x100 bytes starting at start to 0 */ - li r3,0 - mr r4,r30 - li r5,0x100 - li r6,0 - bl .copy_and_flush /* (dest, src, copy limit, start offset) */ -1: /* assume normal blr return */ - - /* release other cpus to the new kernel secondary start at 0x60 */ - mflr r5 - li r6,1 - stw r6,kexec_flag-1b(5) - mr r3,r25 # my phys cpu - mr r4,r30 # start, aka phys mem offset - mtlr 4 - li r5,0 - blr /* image->start(physid, image->start, 0); */ -#endif /* CONFIG_KEXEC */ diff --git a/arch/ppc64/kernel/module.c b/arch/ppc64/kernel/module.c deleted file mode 100644 index 928b8581fcb0..000000000000 --- a/arch/ppc64/kernel/module.c +++ /dev/null @@ -1,455 +0,0 @@ -/* Kernel module help for PPC64. - Copyright (C) 2001, 2003 Rusty Russell IBM Corporation. - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ -#include <linux/module.h> -#include <linux/elf.h> -#include <linux/moduleloader.h> -#include <linux/err.h> -#include <linux/vmalloc.h> -#include <asm/module.h> -#include <asm/uaccess.h> - -/* FIXME: We don't do .init separately. To do this, we'd need to have - a separate r2 value in the init and core section, and stub between - them, too. - - Using a magic allocator which places modules within 32MB solves - this, and makes other things simpler. Anton? - --RR. */ -#if 0 -#define DEBUGP printk -#else -#define DEBUGP(fmt , ...) -#endif - -/* There's actually a third entry here, but it's unused */ -struct ppc64_opd_entry -{ - unsigned long funcaddr; - unsigned long r2; -}; - -/* Like PPC32, we need little trampolines to do > 24-bit jumps (into - the kernel itself). But on PPC64, these need to be used for every - jump, actually, to reset r2 (TOC+0x8000). */ -struct ppc64_stub_entry -{ - /* 28 byte jump instruction sequence (7 instructions) */ - unsigned char jump[28]; - unsigned char unused[4]; - /* Data for the above code */ - struct ppc64_opd_entry opd; -}; - -/* We use a stub to fix up r2 (TOC ptr) and to jump to the (external) - function which may be more than 24-bits away. We could simply - patch the new r2 value and function pointer into the stub, but it's - significantly shorter to put these values at the end of the stub - code, and patch the stub address (32-bits relative to the TOC ptr, - r2) into the stub. */ -static struct ppc64_stub_entry ppc64_stub = -{ .jump = { - 0x3d, 0x82, 0x00, 0x00, /* addis r12,r2, <high> */ - 0x39, 0x8c, 0x00, 0x00, /* addi r12,r12, <low> */ - /* Save current r2 value in magic place on the stack. */ - 0xf8, 0x41, 0x00, 0x28, /* std r2,40(r1) */ - 0xe9, 0x6c, 0x00, 0x20, /* ld r11,32(r12) */ - 0xe8, 0x4c, 0x00, 0x28, /* ld r2,40(r12) */ - 0x7d, 0x69, 0x03, 0xa6, /* mtctr r11 */ - 0x4e, 0x80, 0x04, 0x20 /* bctr */ -} }; - -/* Count how many different 24-bit relocations (different symbol, - different addend) */ -static unsigned int count_relocs(const Elf64_Rela *rela, unsigned int num) -{ - unsigned int i, j, ret = 0; - - /* FIXME: Only count external ones --RR */ - /* Sure, this is order(n^2), but it's usually short, and not - time critical */ - for (i = 0; i < num; i++) { - /* Only count 24-bit relocs, others don't need stubs */ - if (ELF64_R_TYPE(rela[i].r_info) != R_PPC_REL24) - continue; - for (j = 0; j < i; j++) { - /* If this addend appeared before, it's - already been counted */ - if (rela[i].r_info == rela[j].r_info - && rela[i].r_addend == rela[j].r_addend) - break; - } - if (j == i) ret++; - } - return ret; -} - -void *module_alloc(unsigned long size) -{ - if (size == 0) - return NULL; - - return vmalloc_exec(size); -} - -/* Free memory returned from module_alloc */ -void module_free(struct module *mod, void *module_region) -{ - vfree(module_region); - /* FIXME: If module_region == mod->init_region, trim exception - table entries. */ -} - -/* Get size of potential trampolines required. */ -static unsigned long get_stubs_size(const Elf64_Ehdr *hdr, - const Elf64_Shdr *sechdrs) -{ - /* One extra reloc so it's always 0-funcaddr terminated */ - unsigned long relocs = 1; - unsigned i; - - /* Every relocated section... */ - for (i = 1; i < hdr->e_shnum; i++) { - if (sechdrs[i].sh_type == SHT_RELA) { - DEBUGP("Found relocations in section %u\n", i); - DEBUGP("Ptr: %p. Number: %lu\n", - (void *)sechdrs[i].sh_addr, - sechdrs[i].sh_size / sizeof(Elf64_Rela)); - relocs += count_relocs((void *)sechdrs[i].sh_addr, - sechdrs[i].sh_size - / sizeof(Elf64_Rela)); - } - } - - DEBUGP("Looks like a total of %lu stubs, max\n", relocs); - return relocs * sizeof(struct ppc64_stub_entry); -} - -static void dedotify_versions(struct modversion_info *vers, - unsigned long size) -{ - struct modversion_info *end; - - for (end = (void *)vers + size; vers < end; vers++) - if (vers->name[0] == '.') - memmove(vers->name, vers->name+1, strlen(vers->name)); -} - -/* Undefined symbols which refer to .funcname, hack to funcname */ -static void dedotify(Elf64_Sym *syms, unsigned int numsyms, char *strtab) -{ - unsigned int i; - - for (i = 1; i < numsyms; i++) { - if (syms[i].st_shndx == SHN_UNDEF) { - char *name = strtab + syms[i].st_name; - if (name[0] == '.') - memmove(name, name+1, strlen(name)); - } - } -} - -int module_frob_arch_sections(Elf64_Ehdr *hdr, - Elf64_Shdr *sechdrs, - char *secstrings, - struct module *me) -{ - unsigned int i; - - /* Find .toc and .stubs sections, symtab and strtab */ - for (i = 1; i < hdr->e_shnum; i++) { - char *p; - if (strcmp(secstrings + sechdrs[i].sh_name, ".stubs") == 0) - me->arch.stubs_section = i; - else if (strcmp(secstrings + sechdrs[i].sh_name, ".toc") == 0) - me->arch.toc_section = i; - else if (strcmp(secstrings+sechdrs[i].sh_name,"__versions")==0) - dedotify_versions((void *)hdr + sechdrs[i].sh_offset, - sechdrs[i].sh_size); - - /* We don't handle .init for the moment: rename to _init */ - while ((p = strstr(secstrings + sechdrs[i].sh_name, ".init"))) - p[0] = '_'; - - if (sechdrs[i].sh_type == SHT_SYMTAB) - dedotify((void *)hdr + sechdrs[i].sh_offset, - sechdrs[i].sh_size / sizeof(Elf64_Sym), - (void *)hdr - + sechdrs[sechdrs[i].sh_link].sh_offset); - } - if (!me->arch.stubs_section || !me->arch.toc_section) { - printk("%s: doesn't contain .toc or .stubs.\n", me->name); - return -ENOEXEC; - } - - /* Override the stubs size */ - sechdrs[me->arch.stubs_section].sh_size = get_stubs_size(hdr, sechdrs); - return 0; -} - -int apply_relocate(Elf64_Shdr *sechdrs, - const char *strtab, - unsigned int symindex, - unsigned int relsec, - struct module *me) -{ - printk(KERN_ERR "%s: Non-ADD RELOCATION unsupported\n", me->name); - return -ENOEXEC; -} - -/* r2 is the TOC pointer: it actually points 0x8000 into the TOC (this - gives the value maximum span in an instruction which uses a signed - offset) */ -static inline unsigned long my_r2(Elf64_Shdr *sechdrs, struct module *me) -{ - return sechdrs[me->arch.toc_section].sh_addr + 0x8000; -} - -/* Both low and high 16 bits are added as SIGNED additions, so if low - 16 bits has high bit set, high 16 bits must be adjusted. These - macros do that (stolen from binutils). */ -#define PPC_LO(v) ((v) & 0xffff) -#define PPC_HI(v) (((v) >> 16) & 0xffff) -#define PPC_HA(v) PPC_HI ((v) + 0x8000) - -/* Patch stub to reference function and correct r2 value. */ -static inline int create_stub(Elf64_Shdr *sechdrs, - struct ppc64_stub_entry *entry, - struct ppc64_opd_entry *opd, - struct module *me) -{ - Elf64_Half *loc1, *loc2; - long reladdr; - - *entry = ppc64_stub; - - loc1 = (Elf64_Half *)&entry->jump[2]; - loc2 = (Elf64_Half *)&entry->jump[6]; - - /* Stub uses address relative to r2. */ - reladdr = (unsigned long)entry - my_r2(sechdrs, me); - if (reladdr > 0x7FFFFFFF || reladdr < -(0x80000000L)) { - printk("%s: Address %p of stub out of range of %p.\n", - me->name, (void *)reladdr, (void *)my_r2); - return 0; - } - DEBUGP("Stub %p get data from reladdr %li\n", entry, reladdr); - - *loc1 = PPC_HA(reladdr); - *loc2 = PPC_LO(reladdr); - entry->opd.funcaddr = opd->funcaddr; - entry->opd.r2 = opd->r2; - return 1; -} - -/* Create stub to jump to function described in this OPD: we need the - stub to set up the TOC ptr (r2) for the function. */ -static unsigned long stub_for_addr(Elf64_Shdr *sechdrs, - unsigned long opdaddr, - struct module *me) -{ - struct ppc64_stub_entry *stubs; - struct ppc64_opd_entry *opd = (void *)opdaddr; - unsigned int i, num_stubs; - - num_stubs = sechdrs[me->arch.stubs_section].sh_size / sizeof(*stubs); - - /* Find this stub, or if that fails, the next avail. entry */ - stubs = (void *)sechdrs[me->arch.stubs_section].sh_addr; - for (i = 0; stubs[i].opd.funcaddr; i++) { - BUG_ON(i >= num_stubs); - - if (stubs[i].opd.funcaddr == opd->funcaddr) - return (unsigned long)&stubs[i]; - } - - if (!create_stub(sechdrs, &stubs[i], opd, me)) - return 0; - - return (unsigned long)&stubs[i]; -} - -/* We expect a noop next: if it is, replace it with instruction to - restore r2. */ -static int restore_r2(u32 *instruction, struct module *me) -{ - if (*instruction != 0x60000000) { - printk("%s: Expect noop after relocate, got %08x\n", - me->name, *instruction); - return 0; - } - *instruction = 0xe8410028; /* ld r2,40(r1) */ - return 1; -} - -int apply_relocate_add(Elf64_Shdr *sechdrs, - const char *strtab, - unsigned int symindex, - unsigned int relsec, - struct module *me) -{ - unsigned int i; - Elf64_Rela *rela = (void *)sechdrs[relsec].sh_addr; - Elf64_Sym *sym; - unsigned long *location; - unsigned long value; - - DEBUGP("Applying ADD relocate section %u to %u\n", relsec, - sechdrs[relsec].sh_info); - for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rela); i++) { - /* This is where to make the change */ - location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr - + rela[i].r_offset; - /* This is the symbol it is referring to */ - sym = (Elf64_Sym *)sechdrs[symindex].sh_addr - + ELF64_R_SYM(rela[i].r_info); - - DEBUGP("RELOC at %p: %li-type as %s (%lu) + %li\n", - location, (long)ELF64_R_TYPE(rela[i].r_info), - strtab + sym->st_name, (unsigned long)sym->st_value, - (long)rela[i].r_addend); - - /* `Everything is relative'. */ - value = sym->st_value + rela[i].r_addend; - - switch (ELF64_R_TYPE(rela[i].r_info)) { - case R_PPC64_ADDR32: - /* Simply set it */ - *(u32 *)location = value; - break; - - case R_PPC64_ADDR64: - /* Simply set it */ - *(unsigned long *)location = value; - break; - - case R_PPC64_TOC: - *(unsigned long *)location = my_r2(sechdrs, me); - break; - - case R_PPC64_TOC16: - /* Subtact TOC pointer */ - value -= my_r2(sechdrs, me); - if (value + 0x8000 > 0xffff) { - printk("%s: bad TOC16 relocation (%lu)\n", - me->name, value); - return -ENOEXEC; - } - *((uint16_t *) location) - = (*((uint16_t *) location) & ~0xffff) - | (value & 0xffff); - break; - - case R_PPC64_TOC16_DS: - /* Subtact TOC pointer */ - value -= my_r2(sechdrs, me); - if ((value & 3) != 0 || value + 0x8000 > 0xffff) { - printk("%s: bad TOC16_DS relocation (%lu)\n", - me->name, value); - return -ENOEXEC; - } - *((uint16_t *) location) - = (*((uint16_t *) location) & ~0xfffc) - | (value & 0xfffc); - break; - - case R_PPC_REL24: - /* FIXME: Handle weak symbols here --RR */ - if (sym->st_shndx == SHN_UNDEF) { - /* External: go via stub */ - value = stub_for_addr(sechdrs, value, me); - if (!value) - return -ENOENT; - if (!restore_r2((u32 *)location + 1, me)) - return -ENOEXEC; - } - - /* Convert value to relative */ - value -= (unsigned long)location; - if (value + 0x2000000 > 0x3ffffff || (value & 3) != 0){ - printk("%s: REL24 %li out of range!\n", - me->name, (long int)value); - return -ENOEXEC; - } - - /* Only replace bits 2 through 26 */ - *(uint32_t *)location - = (*(uint32_t *)location & ~0x03fffffc) - | (value & 0x03fffffc); - break; - - default: - printk("%s: Unknown ADD relocation: %lu\n", - me->name, - (unsigned long)ELF64_R_TYPE(rela[i].r_info)); - return -ENOEXEC; - } - } - - return 0; -} - -LIST_HEAD(module_bug_list); - -int module_finalize(const Elf_Ehdr *hdr, - const Elf_Shdr *sechdrs, struct module *me) -{ - char *secstrings; - unsigned int i; - - me->arch.bug_table = NULL; - me->arch.num_bugs = 0; - - /* Find the __bug_table section, if present */ - secstrings = (char *)hdr + sechdrs[hdr->e_shstrndx].sh_offset; - for (i = 1; i < hdr->e_shnum; i++) { - if (strcmp(secstrings+sechdrs[i].sh_name, "__bug_table")) - continue; - me->arch.bug_table = (void *) sechdrs[i].sh_addr; - me->arch.num_bugs = sechdrs[i].sh_size / sizeof(struct bug_entry); - break; - } - - /* - * Strictly speaking this should have a spinlock to protect against - * traversals, but since we only traverse on BUG()s, a spinlock - * could potentially lead to deadlock and thus be counter-productive. - */ - list_add(&me->arch.bug_list, &module_bug_list); - - return 0; -} - -void module_arch_cleanup(struct module *mod) -{ - list_del(&mod->arch.bug_list); -} - -struct bug_entry *module_find_bug(unsigned long bugaddr) -{ - struct mod_arch_specific *mod; - unsigned int i; - struct bug_entry *bug; - - list_for_each_entry(mod, &module_bug_list, bug_list) { - bug = mod->bug_table; - for (i = 0; i < mod->num_bugs; ++i, ++bug) - if (bugaddr == bug->bug_addr) - return bug; - } - return NULL; -} diff --git a/arch/ppc64/kernel/nvram.c b/arch/ppc64/kernel/nvram.c index 4fb1a9f5060d..c0fcd29918ce 100644 --- a/arch/ppc64/kernel/nvram.c +++ b/arch/ppc64/kernel/nvram.c @@ -31,7 +31,6 @@ #include <asm/rtas.h> #include <asm/prom.h> #include <asm/machdep.h> -#include <asm/systemcfg.h> #undef DEBUG_NVRAM @@ -167,7 +166,7 @@ static int dev_nvram_ioctl(struct inode *inode, struct file *file, case IOC_NVRAM_GET_OFFSET: { int part, offset; - if (systemcfg->platform != PLATFORM_POWERMAC) + if (_machine != PLATFORM_POWERMAC) return -EINVAL; if (copy_from_user(&part, (void __user*)arg, sizeof(part)) != 0) return -EFAULT; @@ -450,7 +449,7 @@ static int nvram_setup_partition(void) * in our nvram, as Apple defined partitions use pretty much * all of the space */ - if (systemcfg->platform == PLATFORM_POWERMAC) + if (_machine == PLATFORM_POWERMAC) return -ENOSPC; /* see if we have an OS partition that meets our needs. diff --git a/arch/ppc64/kernel/pacaData.c b/arch/ppc64/kernel/pacaData.c deleted file mode 100644 index 3133c72b28ec..000000000000 --- a/arch/ppc64/kernel/pacaData.c +++ /dev/null @@ -1,143 +0,0 @@ -/* - * c 2001 PPC 64 Team, IBM Corp - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include <linux/config.h> -#include <linux/types.h> -#include <linux/threads.h> -#include <linux/module.h> - -#include <asm/processor.h> -#include <asm/ptrace.h> -#include <asm/page.h> - -#include <asm/lppaca.h> -#include <asm/iseries/it_lp_queue.h> -#include <asm/paca.h> - -static union { - struct systemcfg data; - u8 page[PAGE_SIZE]; -} systemcfg_store __attribute__((__section__(".data.page.aligned"))); -struct systemcfg *systemcfg = &systemcfg_store.data; -EXPORT_SYMBOL(systemcfg); - - -/* This symbol is provided by the linker - let it fill in the paca - * field correctly */ -extern unsigned long __toc_start; - -/* The Paca is an array with one entry per processor. Each contains an - * lppaca, which contains the information shared between the - * hypervisor and Linux. Each also contains an ItLpRegSave area which - * is used by the hypervisor to save registers. - * On systems with hardware multi-threading, there are two threads - * per processor. The Paca array must contain an entry for each thread. - * The VPD Areas will give a max logical processors = 2 * max physical - * processors. The processor VPD array needs one entry per physical - * processor (not thread). - */ -#define PACA_INIT_COMMON(number, start, asrr, asrv) \ - .lock_token = 0x8000, \ - .paca_index = (number), /* Paca Index */ \ - .default_decr = 0x00ff0000, /* Initial Decr */ \ - .kernel_toc = (unsigned long)(&__toc_start) + 0x8000UL, \ - .stab_real = (asrr), /* Real pointer to segment table */ \ - .stab_addr = (asrv), /* Virt pointer to segment table */ \ - .cpu_start = (start), /* Processor start */ \ - .hw_cpu_id = 0xffff, \ - .lppaca = { \ - .desc = 0xd397d781, /* "LpPa" */ \ - .size = sizeof(struct lppaca), \ - .dyn_proc_status = 2, \ - .decr_val = 0x00ff0000, \ - .fpregs_in_use = 1, \ - .end_of_quantum = 0xfffffffffffffffful, \ - .slb_count = 64, \ - .vmxregs_in_use = 0, \ - }, \ - -#ifdef CONFIG_PPC_ISERIES -#define PACA_INIT_ISERIES(number) \ - .lppaca_ptr = &paca[number].lppaca, \ - .reg_save_ptr = &paca[number].reg_save, \ - .reg_save = { \ - .xDesc = 0xd397d9e2, /* "LpRS" */ \ - .xSize = sizeof(struct ItLpRegSave) \ - } - -#define PACA_INIT(number) \ -{ \ - PACA_INIT_COMMON(number, 0, 0, 0) \ - PACA_INIT_ISERIES(number) \ -} - -#define BOOTCPU_PACA_INIT(number) \ -{ \ - PACA_INIT_COMMON(number, 1, 0, (u64)&initial_stab) \ - PACA_INIT_ISERIES(number) \ -} - -#else -#define PACA_INIT(number) \ -{ \ - PACA_INIT_COMMON(number, 0, 0, 0) \ -} - -#define BOOTCPU_PACA_INIT(number) \ -{ \ - PACA_INIT_COMMON(number, 1, STAB0_PHYS_ADDR, (u64)&initial_stab) \ -} -#endif - -struct paca_struct paca[] = { - BOOTCPU_PACA_INIT(0), -#if NR_CPUS > 1 - PACA_INIT( 1), PACA_INIT( 2), PACA_INIT( 3), -#if NR_CPUS > 4 - PACA_INIT( 4), PACA_INIT( 5), PACA_INIT( 6), PACA_INIT( 7), -#if NR_CPUS > 8 - PACA_INIT( 8), PACA_INIT( 9), PACA_INIT( 10), PACA_INIT( 11), - PACA_INIT( 12), PACA_INIT( 13), PACA_INIT( 14), PACA_INIT( 15), - PACA_INIT( 16), PACA_INIT( 17), PACA_INIT( 18), PACA_INIT( 19), - PACA_INIT( 20), PACA_INIT( 21), PACA_INIT( 22), PACA_INIT( 23), - PACA_INIT( 24), PACA_INIT( 25), PACA_INIT( 26), PACA_INIT( 27), - PACA_INIT( 28), PACA_INIT( 29), PACA_INIT( 30), PACA_INIT( 31), -#if NR_CPUS > 32 - PACA_INIT( 32), PACA_INIT( 33), PACA_INIT( 34), PACA_INIT( 35), - PACA_INIT( 36), PACA_INIT( 37), PACA_INIT( 38), PACA_INIT( 39), - PACA_INIT( 40), PACA_INIT( 41), PACA_INIT( 42), PACA_INIT( 43), - PACA_INIT( 44), PACA_INIT( 45), PACA_INIT( 46), PACA_INIT( 47), - PACA_INIT( 48), PACA_INIT( 49), PACA_INIT( 50), PACA_INIT( 51), - PACA_INIT( 52), PACA_INIT( 53), PACA_INIT( 54), PACA_INIT( 55), - PACA_INIT( 56), PACA_INIT( 57), PACA_INIT( 58), PACA_INIT( 59), - PACA_INIT( 60), PACA_INIT( 61), PACA_INIT( 62), PACA_INIT( 63), -#if NR_CPUS > 64 - PACA_INIT( 64), PACA_INIT( 65), PACA_INIT( 66), PACA_INIT( 67), - PACA_INIT( 68), PACA_INIT( 69), PACA_INIT( 70), PACA_INIT( 71), - PACA_INIT( 72), PACA_INIT( 73), PACA_INIT( 74), PACA_INIT( 75), - PACA_INIT( 76), PACA_INIT( 77), PACA_INIT( 78), PACA_INIT( 79), - PACA_INIT( 80), PACA_INIT( 81), PACA_INIT( 82), PACA_INIT( 83), - PACA_INIT( 84), PACA_INIT( 85), PACA_INIT( 86), PACA_INIT( 87), - PACA_INIT( 88), PACA_INIT( 89), PACA_INIT( 90), PACA_INIT( 91), - PACA_INIT( 92), PACA_INIT( 93), PACA_INIT( 94), PACA_INIT( 95), - PACA_INIT( 96), PACA_INIT( 97), PACA_INIT( 98), PACA_INIT( 99), - PACA_INIT(100), PACA_INIT(101), PACA_INIT(102), PACA_INIT(103), - PACA_INIT(104), PACA_INIT(105), PACA_INIT(106), PACA_INIT(107), - PACA_INIT(108), PACA_INIT(109), PACA_INIT(110), PACA_INIT(111), - PACA_INIT(112), PACA_INIT(113), PACA_INIT(114), PACA_INIT(115), - PACA_INIT(116), PACA_INIT(117), PACA_INIT(118), PACA_INIT(119), - PACA_INIT(120), PACA_INIT(121), PACA_INIT(122), PACA_INIT(123), - PACA_INIT(124), PACA_INIT(125), PACA_INIT(126), PACA_INIT(127), -#endif -#endif -#endif -#endif -#endif -}; -EXPORT_SYMBOL(paca); diff --git a/arch/ppc64/kernel/pci.c b/arch/ppc64/kernel/pci.c deleted file mode 100644 index 3d2106b022a1..000000000000 --- a/arch/ppc64/kernel/pci.c +++ /dev/null @@ -1,1316 +0,0 @@ -/* - * Port for PPC64 David Engebretsen, IBM Corp. - * Contains common pci routines for ppc64 platform, pSeries and iSeries brands. - * - * Copyright (C) 2003 Anton Blanchard <anton@au.ibm.com>, IBM - * Rework, based on alpha PCI code. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#undef DEBUG - -#include <linux/config.h> -#include <linux/kernel.h> -#include <linux/pci.h> -#include <linux/string.h> -#include <linux/init.h> -#include <linux/bootmem.h> -#include <linux/mm.h> -#include <linux/list.h> -#include <linux/syscalls.h> - -#include <asm/processor.h> -#include <asm/io.h> -#include <asm/prom.h> -#include <asm/pci-bridge.h> -#include <asm/byteorder.h> -#include <asm/irq.h> -#include <asm/machdep.h> -#include <asm/udbg.h> -#include <asm/ppc-pci.h> - -#ifdef DEBUG -#define DBG(fmt...) udbg_printf(fmt) -#else -#define DBG(fmt...) -#endif - -unsigned long pci_probe_only = 1; -unsigned long pci_assign_all_buses = 0; - -/* - * legal IO pages under MAX_ISA_PORT. This is to ensure we don't touch - * devices we don't have access to. - */ -unsigned long io_page_mask; - -EXPORT_SYMBOL(io_page_mask); - -#ifdef CONFIG_PPC_MULTIPLATFORM -static void fixup_resource(struct resource *res, struct pci_dev *dev); -static void do_bus_setup(struct pci_bus *bus); -#endif - -unsigned int pcibios_assign_all_busses(void) -{ - return pci_assign_all_buses; -} - -/* pci_io_base -- the base address from which io bars are offsets. - * This is the lowest I/O base address (so bar values are always positive), - * and it *must* be the start of ISA space if an ISA bus exists because - * ISA drivers use hard coded offsets. If no ISA bus exists a dummy - * page is mapped and isa_io_limit prevents access to it. - */ -unsigned long isa_io_base; /* NULL if no ISA bus */ -EXPORT_SYMBOL(isa_io_base); -unsigned long pci_io_base; -EXPORT_SYMBOL(pci_io_base); - -void iSeries_pcibios_init(void); - -LIST_HEAD(hose_list); - -struct dma_mapping_ops pci_dma_ops; -EXPORT_SYMBOL(pci_dma_ops); - -int global_phb_number; /* Global phb counter */ - -/* Cached ISA bridge dev. */ -struct pci_dev *ppc64_isabridge_dev = NULL; - -static void fixup_broken_pcnet32(struct pci_dev* dev) -{ - if ((dev->class>>8 == PCI_CLASS_NETWORK_ETHERNET)) { - dev->vendor = PCI_VENDOR_ID_AMD; - pci_write_config_word(dev, PCI_VENDOR_ID, PCI_VENDOR_ID_AMD); - } -} -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TRIDENT, PCI_ANY_ID, fixup_broken_pcnet32); - -void pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region, - struct resource *res) -{ - unsigned long offset = 0; - struct pci_controller *hose = pci_bus_to_host(dev->bus); - - if (!hose) - return; - - if (res->flags & IORESOURCE_IO) - offset = (unsigned long)hose->io_base_virt - pci_io_base; - - if (res->flags & IORESOURCE_MEM) - offset = hose->pci_mem_offset; - - region->start = res->start - offset; - region->end = res->end - offset; -} - -void pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res, - struct pci_bus_region *region) -{ - unsigned long offset = 0; - struct pci_controller *hose = pci_bus_to_host(dev->bus); - - if (!hose) - return; - - if (res->flags & IORESOURCE_IO) - offset = (unsigned long)hose->io_base_virt - pci_io_base; - - if (res->flags & IORESOURCE_MEM) - offset = hose->pci_mem_offset; - - res->start = region->start + offset; - res->end = region->end + offset; -} - -#ifdef CONFIG_HOTPLUG -EXPORT_SYMBOL(pcibios_resource_to_bus); -EXPORT_SYMBOL(pcibios_bus_to_resource); -#endif - -/* - * We need to avoid collisions with `mirrored' VGA ports - * and other strange ISA hardware, so we always want the - * addresses to be allocated in the 0x000-0x0ff region - * modulo 0x400. - * - * Why? Because some silly external IO cards only decode - * the low 10 bits of the IO address. The 0x00-0xff region - * is reserved for motherboard devices that decode all 16 - * bits, so it's ok to allocate at, say, 0x2800-0x28ff, - * but we want to try to avoid allocating at 0x2900-0x2bff - * which might have be mirrored at 0x0100-0x03ff.. - */ -void pcibios_align_resource(void *data, struct resource *res, - unsigned long size, unsigned long align) -{ - struct pci_dev *dev = data; - struct pci_controller *hose = pci_bus_to_host(dev->bus); - unsigned long start = res->start; - unsigned long alignto; - - if (res->flags & IORESOURCE_IO) { - unsigned long offset = (unsigned long)hose->io_base_virt - - pci_io_base; - /* Make sure we start at our min on all hoses */ - if (start - offset < PCIBIOS_MIN_IO) - start = PCIBIOS_MIN_IO + offset; - - /* - * Put everything into 0x00-0xff region modulo 0x400 - */ - if (start & 0x300) - start = (start + 0x3ff) & ~0x3ff; - - } else if (res->flags & IORESOURCE_MEM) { - /* Make sure we start at our min on all hoses */ - if (start - hose->pci_mem_offset < PCIBIOS_MIN_MEM) - start = PCIBIOS_MIN_MEM + hose->pci_mem_offset; - - /* Align to multiple of size of minimum base. */ - alignto = max(0x1000UL, align); - start = ALIGN(start, alignto); - } - - res->start = start; -} - -static DEFINE_SPINLOCK(hose_spinlock); - -/* - * pci_controller(phb) initialized common variables. - */ -void __devinit pci_setup_pci_controller(struct pci_controller *hose) -{ - memset(hose, 0, sizeof(struct pci_controller)); - - spin_lock(&hose_spinlock); - hose->global_number = global_phb_number++; - list_add_tail(&hose->list_node, &hose_list); - spin_unlock(&hose_spinlock); -} - -static void __init pcibios_claim_one_bus(struct pci_bus *b) -{ - struct pci_dev *dev; - struct pci_bus *child_bus; - - list_for_each_entry(dev, &b->devices, bus_list) { - int i; - - for (i = 0; i < PCI_NUM_RESOURCES; i++) { - struct resource *r = &dev->resource[i]; - - if (r->parent || !r->start || !r->flags) - continue; - pci_claim_resource(dev, i); - } - } - - list_for_each_entry(child_bus, &b->children, node) - pcibios_claim_one_bus(child_bus); -} - -#ifndef CONFIG_PPC_ISERIES -static void __init pcibios_claim_of_setup(void) -{ - struct pci_bus *b; - - list_for_each_entry(b, &pci_root_buses, node) - pcibios_claim_one_bus(b); -} -#endif - -#ifdef CONFIG_PPC_MULTIPLATFORM -static u32 get_int_prop(struct device_node *np, const char *name, u32 def) -{ - u32 *prop; - int len; - - prop = (u32 *) get_property(np, name, &len); - if (prop && len >= 4) - return *prop; - return def; -} - -static unsigned int pci_parse_of_flags(u32 addr0) -{ - unsigned int flags = 0; - - if (addr0 & 0x02000000) { - flags = IORESOURCE_MEM | PCI_BASE_ADDRESS_SPACE_MEMORY; - flags |= (addr0 >> 22) & PCI_BASE_ADDRESS_MEM_TYPE_64; - flags |= (addr0 >> 28) & PCI_BASE_ADDRESS_MEM_TYPE_1M; - if (addr0 & 0x40000000) - flags |= IORESOURCE_PREFETCH - | PCI_BASE_ADDRESS_MEM_PREFETCH; - } else if (addr0 & 0x01000000) - flags = IORESOURCE_IO | PCI_BASE_ADDRESS_SPACE_IO; - return flags; -} - -#define GET_64BIT(prop, i) ((((u64) (prop)[(i)]) << 32) | (prop)[(i)+1]) - -static void pci_parse_of_addrs(struct device_node *node, struct pci_dev *dev) -{ - u64 base, size; - unsigned int flags; - struct resource *res; - u32 *addrs, i; - int proplen; - - addrs = (u32 *) get_property(node, "assigned-addresses", &proplen); - if (!addrs) - return; - for (; proplen >= 20; proplen -= 20, addrs += 5) { - flags = pci_parse_of_flags(addrs[0]); - if (!flags) - continue; - base = GET_64BIT(addrs, 1); - size = GET_64BIT(addrs, 3); - if (!size) - continue; - i = addrs[0] & 0xff; - if (PCI_BASE_ADDRESS_0 <= i && i <= PCI_BASE_ADDRESS_5) { - res = &dev->resource[(i - PCI_BASE_ADDRESS_0) >> 2]; - } else if (i == dev->rom_base_reg) { - res = &dev->resource[PCI_ROM_RESOURCE]; - flags |= IORESOURCE_READONLY | IORESOURCE_CACHEABLE; - } else { - printk(KERN_ERR "PCI: bad cfg reg num 0x%x\n", i); - continue; - } - res->start = base; - res->end = base + size - 1; - res->flags = flags; - res->name = pci_name(dev); - fixup_resource(res, dev); - } -} - -static struct pci_dev *of_create_pci_dev(struct device_node *node, - struct pci_bus *bus, int devfn) -{ - struct pci_dev *dev; - const char *type; - - dev = kmalloc(sizeof(struct pci_dev), GFP_KERNEL); - if (!dev) - return NULL; - type = get_property(node, "device_type", NULL); - if (type == NULL) - type = ""; - - memset(dev, 0, sizeof(struct pci_dev)); - dev->bus = bus; - dev->sysdata = node; - dev->dev.parent = bus->bridge; - dev->dev.bus = &pci_bus_type; - dev->devfn = devfn; - dev->multifunction = 0; /* maybe a lie? */ - - dev->vendor = get_int_prop(node, "vendor-id", 0xffff); - dev->device = get_int_prop(node, "device-id", 0xffff); - dev->subsystem_vendor = get_int_prop(node, "subsystem-vendor-id", 0); - dev->subsystem_device = get_int_prop(node, "subsystem-id", 0); - - dev->cfg_size = 256; /*pci_cfg_space_size(dev);*/ - - sprintf(pci_name(dev), "%04x:%02x:%02x.%d", pci_domain_nr(bus), - dev->bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn)); - dev->class = get_int_prop(node, "class-code", 0); - - dev->current_state = 4; /* unknown power state */ - - if (!strcmp(type, "pci")) { - /* a PCI-PCI bridge */ - dev->hdr_type = PCI_HEADER_TYPE_BRIDGE; - dev->rom_base_reg = PCI_ROM_ADDRESS1; - } else if (!strcmp(type, "cardbus")) { - dev->hdr_type = PCI_HEADER_TYPE_CARDBUS; - } else { - dev->hdr_type = PCI_HEADER_TYPE_NORMAL; - dev->rom_base_reg = PCI_ROM_ADDRESS; - dev->irq = NO_IRQ; - if (node->n_intrs > 0) { - dev->irq = node->intrs[0].line; - pci_write_config_byte(dev, PCI_INTERRUPT_LINE, - dev->irq); - } - } - - pci_parse_of_addrs(node, dev); - - pci_device_add(dev, bus); - - /* XXX pci_scan_msi_device(dev); */ - - return dev; -} - -static void of_scan_pci_bridge(struct device_node *node, struct pci_dev *dev); - -static void __devinit of_scan_bus(struct device_node *node, - struct pci_bus *bus) -{ - struct device_node *child = NULL; - u32 *reg; - int reglen, devfn; - struct pci_dev *dev; - - while ((child = of_get_next_child(node, child)) != NULL) { - reg = (u32 *) get_property(child, "reg", ®len); - if (reg == NULL || reglen < 20) - continue; - devfn = (reg[0] >> 8) & 0xff; - /* create a new pci_dev for this device */ - dev = of_create_pci_dev(child, bus, devfn); - if (!dev) - continue; - if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE || - dev->hdr_type == PCI_HEADER_TYPE_CARDBUS) - of_scan_pci_bridge(child, dev); - } - - do_bus_setup(bus); -} - -static void __devinit of_scan_pci_bridge(struct device_node *node, - struct pci_dev *dev) -{ - struct pci_bus *bus; - u32 *busrange, *ranges; - int len, i, mode; - struct resource *res; - unsigned int flags; - u64 size; - - /* parse bus-range property */ - busrange = (u32 *) get_property(node, "bus-range", &len); - if (busrange == NULL || len != 8) { - printk(KERN_ERR "Can't get bus-range for PCI-PCI bridge %s\n", - node->full_name); - return; - } - ranges = (u32 *) get_property(node, "ranges", &len); - if (ranges == NULL) { - printk(KERN_ERR "Can't get ranges for PCI-PCI bridge %s\n", - node->full_name); - return; - } - - bus = pci_add_new_bus(dev->bus, dev, busrange[0]); - if (!bus) { - printk(KERN_ERR "Failed to create pci bus for %s\n", - node->full_name); - return; - } - - bus->primary = dev->bus->number; - bus->subordinate = busrange[1]; - bus->bridge_ctl = 0; - bus->sysdata = node; - - /* parse ranges property */ - /* PCI #address-cells == 3 and #size-cells == 2 always */ - res = &dev->resource[PCI_BRIDGE_RESOURCES]; - for (i = 0; i < PCI_NUM_RESOURCES - PCI_BRIDGE_RESOURCES; ++i) { - res->flags = 0; - bus->resource[i] = res; - ++res; - } - i = 1; - for (; len >= 32; len -= 32, ranges += 8) { - flags = pci_parse_of_flags(ranges[0]); - size = GET_64BIT(ranges, 6); - if (flags == 0 || size == 0) - continue; - if (flags & IORESOURCE_IO) { - res = bus->resource[0]; - if (res->flags) { - printk(KERN_ERR "PCI: ignoring extra I/O range" - " for bridge %s\n", node->full_name); - continue; - } - } else { - if (i >= PCI_NUM_RESOURCES - PCI_BRIDGE_RESOURCES) { - printk(KERN_ERR "PCI: too many memory ranges" - " for bridge %s\n", node->full_name); - continue; - } - res = bus->resource[i]; - ++i; - } - res->start = GET_64BIT(ranges, 1); - res->end = res->start + size - 1; - res->flags = flags; - fixup_resource(res, dev); - } - sprintf(bus->name, "PCI Bus %04x:%02x", pci_domain_nr(bus), - bus->number); - - mode = PCI_PROBE_NORMAL; - if (ppc_md.pci_probe_mode) - mode = ppc_md.pci_probe_mode(bus); - if (mode == PCI_PROBE_DEVTREE) - of_scan_bus(node, bus); - else if (mode == PCI_PROBE_NORMAL) - pci_scan_child_bus(bus); -} -#endif /* CONFIG_PPC_MULTIPLATFORM */ - -static void __devinit scan_phb(struct pci_controller *hose) -{ - struct pci_bus *bus; - struct device_node *node = hose->arch_data; - int i, mode; - struct resource *res; - - bus = pci_create_bus(NULL, hose->first_busno, hose->ops, node); - if (bus == NULL) { - printk(KERN_ERR "Failed to create bus for PCI domain %04x\n", - hose->global_number); - return; - } - bus->secondary = hose->first_busno; - hose->bus = bus; - - bus->resource[0] = res = &hose->io_resource; - if (res->flags && request_resource(&ioport_resource, res)) - printk(KERN_ERR "Failed to request PCI IO region " - "on PCI domain %04x\n", hose->global_number); - - for (i = 0; i < 3; ++i) { - res = &hose->mem_resources[i]; - bus->resource[i+1] = res; - if (res->flags && request_resource(&iomem_resource, res)) - printk(KERN_ERR "Failed to request PCI memory region " - "on PCI domain %04x\n", hose->global_number); - } - - mode = PCI_PROBE_NORMAL; -#ifdef CONFIG_PPC_MULTIPLATFORM - if (ppc_md.pci_probe_mode) - mode = ppc_md.pci_probe_mode(bus); - if (mode == PCI_PROBE_DEVTREE) { - bus->subordinate = hose->last_busno; - of_scan_bus(node, bus); - } -#endif /* CONFIG_PPC_MULTIPLATFORM */ - if (mode == PCI_PROBE_NORMAL) - hose->last_busno = bus->subordinate = pci_scan_child_bus(bus); - pci_bus_add_devices(bus); -} - -static int __init pcibios_init(void) -{ - struct pci_controller *hose, *tmp; - - /* For now, override phys_mem_access_prot. If we need it, - * later, we may move that initialization to each ppc_md - */ - ppc_md.phys_mem_access_prot = pci_phys_mem_access_prot; - -#ifdef CONFIG_PPC_ISERIES - iSeries_pcibios_init(); -#endif - - printk("PCI: Probing PCI hardware\n"); - - /* Scan all of the recorded PCI controllers. */ - list_for_each_entry_safe(hose, tmp, &hose_list, list_node) - scan_phb(hose); - -#ifndef CONFIG_PPC_ISERIES - if (pci_probe_only) - pcibios_claim_of_setup(); - else - /* FIXME: `else' will be removed when - pci_assign_unassigned_resources() is able to work - correctly with [partially] allocated PCI tree. */ - pci_assign_unassigned_resources(); -#endif /* !CONFIG_PPC_ISERIES */ - - /* Call machine dependent final fixup */ - if (ppc_md.pcibios_fixup) - ppc_md.pcibios_fixup(); - - /* Cache the location of the ISA bridge (if we have one) */ - ppc64_isabridge_dev = pci_get_class(PCI_CLASS_BRIDGE_ISA << 8, NULL); - if (ppc64_isabridge_dev != NULL) - printk("ISA bridge at %s\n", pci_name(ppc64_isabridge_dev)); - - printk("PCI: Probing PCI hardware done\n"); - - return 0; -} - -subsys_initcall(pcibios_init); - -char __init *pcibios_setup(char *str) -{ - return str; -} - -int pcibios_enable_device(struct pci_dev *dev, int mask) -{ - u16 cmd, oldcmd; - int i; - - pci_read_config_word(dev, PCI_COMMAND, &cmd); - oldcmd = cmd; - - for (i = 0; i < PCI_NUM_RESOURCES; i++) { - struct resource *res = &dev->resource[i]; - - /* Only set up the requested stuff */ - if (!(mask & (1<<i))) - continue; - - if (res->flags & IORESOURCE_IO) - cmd |= PCI_COMMAND_IO; - if (res->flags & IORESOURCE_MEM) - cmd |= PCI_COMMAND_MEMORY; - } - - if (cmd != oldcmd) { - printk(KERN_DEBUG "PCI: Enabling device: (%s), cmd %x\n", - pci_name(dev), cmd); - /* Enable the appropriate bits in the PCI command register. */ - pci_write_config_word(dev, PCI_COMMAND, cmd); - } - return 0; -} - -/* - * Return the domain number for this bus. - */ -int pci_domain_nr(struct pci_bus *bus) -{ -#ifdef CONFIG_PPC_ISERIES - return 0; -#else - struct pci_controller *hose = pci_bus_to_host(bus); - - return hose->global_number; -#endif -} - -EXPORT_SYMBOL(pci_domain_nr); - -/* Decide whether to display the domain number in /proc */ -int pci_proc_domain(struct pci_bus *bus) -{ -#ifdef CONFIG_PPC_ISERIES - return 0; -#else - struct pci_controller *hose = pci_bus_to_host(bus); - return hose->buid; -#endif -} - -/* - * Platform support for /proc/bus/pci/X/Y mmap()s, - * modelled on the sparc64 implementation by Dave Miller. - * -- paulus. - */ - -/* - * Adjust vm_pgoff of VMA such that it is the physical page offset - * corresponding to the 32-bit pci bus offset for DEV requested by the user. - * - * Basically, the user finds the base address for his device which he wishes - * to mmap. They read the 32-bit value from the config space base register, - * add whatever PAGE_SIZE multiple offset they wish, and feed this into the - * offset parameter of mmap on /proc/bus/pci/XXX for that device. - * - * Returns negative error code on failure, zero on success. - */ -static struct resource *__pci_mmap_make_offset(struct pci_dev *dev, - unsigned long *offset, - enum pci_mmap_state mmap_state) -{ - struct pci_controller *hose = pci_bus_to_host(dev->bus); - unsigned long io_offset = 0; - int i, res_bit; - - if (hose == 0) - return NULL; /* should never happen */ - - /* If memory, add on the PCI bridge address offset */ - if (mmap_state == pci_mmap_mem) { - *offset += hose->pci_mem_offset; - res_bit = IORESOURCE_MEM; - } else { - io_offset = (unsigned long)hose->io_base_virt - pci_io_base; - *offset += io_offset; - res_bit = IORESOURCE_IO; - } - - /* - * Check that the offset requested corresponds to one of the - * resources of the device. - */ - for (i = 0; i <= PCI_ROM_RESOURCE; i++) { - struct resource *rp = &dev->resource[i]; - int flags = rp->flags; - - /* treat ROM as memory (should be already) */ - if (i == PCI_ROM_RESOURCE) - flags |= IORESOURCE_MEM; - - /* Active and same type? */ - if ((flags & res_bit) == 0) - continue; - - /* In the range of this resource? */ - if (*offset < (rp->start & PAGE_MASK) || *offset > rp->end) - continue; - - /* found it! construct the final physical address */ - if (mmap_state == pci_mmap_io) - *offset += hose->io_base_phys - io_offset; - return rp; - } - - return NULL; -} - -/* - * Set vm_page_prot of VMA, as appropriate for this architecture, for a pci - * device mapping. - */ -static pgprot_t __pci_mmap_set_pgprot(struct pci_dev *dev, struct resource *rp, - pgprot_t protection, - enum pci_mmap_state mmap_state, - int write_combine) -{ - unsigned long prot = pgprot_val(protection); - - /* Write combine is always 0 on non-memory space mappings. On - * memory space, if the user didn't pass 1, we check for a - * "prefetchable" resource. This is a bit hackish, but we use - * this to workaround the inability of /sysfs to provide a write - * combine bit - */ - if (mmap_state != pci_mmap_mem) - write_combine = 0; - else if (write_combine == 0) { - if (rp->flags & IORESOURCE_PREFETCH) - write_combine = 1; - } - - /* XXX would be nice to have a way to ask for write-through */ - prot |= _PAGE_NO_CACHE; - if (write_combine) - prot &= ~_PAGE_GUARDED; - else - prot |= _PAGE_GUARDED; - - printk("PCI map for %s:%lx, prot: %lx\n", pci_name(dev), rp->start, - prot); - - return __pgprot(prot); -} - -/* - * This one is used by /dev/mem and fbdev who have no clue about the - * PCI device, it tries to find the PCI device first and calls the - * above routine - */ -pgprot_t pci_phys_mem_access_prot(struct file *file, - unsigned long pfn, - unsigned long size, - pgprot_t protection) -{ - struct pci_dev *pdev = NULL; - struct resource *found = NULL; - unsigned long prot = pgprot_val(protection); - unsigned long offset = pfn << PAGE_SHIFT; - int i; - - if (page_is_ram(pfn)) - return __pgprot(prot); - - prot |= _PAGE_NO_CACHE | _PAGE_GUARDED; - - for_each_pci_dev(pdev) { - for (i = 0; i <= PCI_ROM_RESOURCE; i++) { - struct resource *rp = &pdev->resource[i]; - int flags = rp->flags; - - /* Active and same type? */ - if ((flags & IORESOURCE_MEM) == 0) - continue; - /* In the range of this resource? */ - if (offset < (rp->start & PAGE_MASK) || - offset > rp->end) - continue; - found = rp; - break; - } - if (found) - break; - } - if (found) { - if (found->flags & IORESOURCE_PREFETCH) - prot &= ~_PAGE_GUARDED; - pci_dev_put(pdev); - } - - DBG("non-PCI map for %lx, prot: %lx\n", offset, prot); - - return __pgprot(prot); -} - - -/* - * Perform the actual remap of the pages for a PCI device mapping, as - * appropriate for this architecture. The region in the process to map - * is described by vm_start and vm_end members of VMA, the base physical - * address is found in vm_pgoff. - * The pci device structure is provided so that architectures may make mapping - * decisions on a per-device or per-bus basis. - * - * Returns a negative error code on failure, zero on success. - */ -int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, - enum pci_mmap_state mmap_state, - int write_combine) -{ - unsigned long offset = vma->vm_pgoff << PAGE_SHIFT; - struct resource *rp; - int ret; - - rp = __pci_mmap_make_offset(dev, &offset, mmap_state); - if (rp == NULL) - return -EINVAL; - - vma->vm_pgoff = offset >> PAGE_SHIFT; - vma->vm_flags |= VM_SHM | VM_LOCKED | VM_IO; - vma->vm_page_prot = __pci_mmap_set_pgprot(dev, rp, - vma->vm_page_prot, - mmap_state, write_combine); - - ret = remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff, - vma->vm_end - vma->vm_start, vma->vm_page_prot); - - return ret; -} - -#ifdef CONFIG_PPC_MULTIPLATFORM -static ssize_t pci_show_devspec(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct pci_dev *pdev; - struct device_node *np; - - pdev = to_pci_dev (dev); - np = pci_device_to_OF_node(pdev); - if (np == NULL || np->full_name == NULL) - return 0; - return sprintf(buf, "%s", np->full_name); -} -static DEVICE_ATTR(devspec, S_IRUGO, pci_show_devspec, NULL); -#endif /* CONFIG_PPC_MULTIPLATFORM */ - -void pcibios_add_platform_entries(struct pci_dev *pdev) -{ -#ifdef CONFIG_PPC_MULTIPLATFORM - device_create_file(&pdev->dev, &dev_attr_devspec); -#endif /* CONFIG_PPC_MULTIPLATFORM */ -} - -#ifdef CONFIG_PPC_MULTIPLATFORM - -#define ISA_SPACE_MASK 0x1 -#define ISA_SPACE_IO 0x1 - -static void __devinit pci_process_ISA_OF_ranges(struct device_node *isa_node, - unsigned long phb_io_base_phys, - void __iomem * phb_io_base_virt) -{ - struct isa_range *range; - unsigned long pci_addr; - unsigned int isa_addr; - unsigned int size; - int rlen = 0; - - range = (struct isa_range *) get_property(isa_node, "ranges", &rlen); - if (range == NULL || (rlen < sizeof(struct isa_range))) { - printk(KERN_ERR "no ISA ranges or unexpected isa range size," - "mapping 64k\n"); - __ioremap_explicit(phb_io_base_phys, - (unsigned long)phb_io_base_virt, - 0x10000, _PAGE_NO_CACHE | _PAGE_GUARDED); - return; - } - - /* From "ISA Binding to 1275" - * The ranges property is laid out as an array of elements, - * each of which comprises: - * cells 0 - 1: an ISA address - * cells 2 - 4: a PCI address - * (size depending on dev->n_addr_cells) - * cell 5: the size of the range - */ - if ((range->isa_addr.a_hi && ISA_SPACE_MASK) == ISA_SPACE_IO) { - isa_addr = range->isa_addr.a_lo; - pci_addr = (unsigned long) range->pci_addr.a_mid << 32 | - range->pci_addr.a_lo; - - /* Assume these are both zero */ - if ((pci_addr != 0) || (isa_addr != 0)) { - printk(KERN_ERR "unexpected isa to pci mapping: %s\n", - __FUNCTION__); - return; - } - - size = PAGE_ALIGN(range->size); - - __ioremap_explicit(phb_io_base_phys, - (unsigned long) phb_io_base_virt, - size, _PAGE_NO_CACHE | _PAGE_GUARDED); - } -} - -void __devinit pci_process_bridge_OF_ranges(struct pci_controller *hose, - struct device_node *dev, int prim) -{ - unsigned int *ranges, pci_space; - unsigned long size; - int rlen = 0; - int memno = 0; - struct resource *res; - int np, na = prom_n_addr_cells(dev); - unsigned long pci_addr, cpu_phys_addr; - - np = na + 5; - - /* From "PCI Binding to 1275" - * The ranges property is laid out as an array of elements, - * each of which comprises: - * cells 0 - 2: a PCI address - * cells 3 or 3+4: a CPU physical address - * (size depending on dev->n_addr_cells) - * cells 4+5 or 5+6: the size of the range - */ - rlen = 0; - hose->io_base_phys = 0; - ranges = (unsigned int *) get_property(dev, "ranges", &rlen); - while ((rlen -= np * sizeof(unsigned int)) >= 0) { - res = NULL; - pci_space = ranges[0]; - pci_addr = ((unsigned long)ranges[1] << 32) | ranges[2]; - - cpu_phys_addr = ranges[3]; - if (na >= 2) - cpu_phys_addr = (cpu_phys_addr << 32) | ranges[4]; - - size = ((unsigned long)ranges[na+3] << 32) | ranges[na+4]; - ranges += np; - if (size == 0) - continue; - - /* Now consume following elements while they are contiguous */ - while (rlen >= np * sizeof(unsigned int)) { - unsigned long addr, phys; - - if (ranges[0] != pci_space) - break; - addr = ((unsigned long)ranges[1] << 32) | ranges[2]; - phys = ranges[3]; - if (na >= 2) - phys = (phys << 32) | ranges[4]; - if (addr != pci_addr + size || - phys != cpu_phys_addr + size) - break; - - size += ((unsigned long)ranges[na+3] << 32) - | ranges[na+4]; - ranges += np; - rlen -= np * sizeof(unsigned int); - } - - switch ((pci_space >> 24) & 0x3) { - case 1: /* I/O space */ - hose->io_base_phys = cpu_phys_addr; - hose->pci_io_size = size; - - res = &hose->io_resource; - res->flags = IORESOURCE_IO; - res->start = pci_addr; - DBG("phb%d: IO 0x%lx -> 0x%lx\n", hose->global_number, - res->start, res->start + size - 1); - break; - case 2: /* memory space */ - memno = 0; - while (memno < 3 && hose->mem_resources[memno].flags) - ++memno; - - if (memno == 0) - hose->pci_mem_offset = cpu_phys_addr - pci_addr; - if (memno < 3) { - res = &hose->mem_resources[memno]; - res->flags = IORESOURCE_MEM; - res->start = cpu_phys_addr; - DBG("phb%d: MEM 0x%lx -> 0x%lx\n", hose->global_number, - res->start, res->start + size - 1); - } - break; - } - if (res != NULL) { - res->name = dev->full_name; - res->end = res->start + size - 1; - res->parent = NULL; - res->sibling = NULL; - res->child = NULL; - } - } -} - -void __init pci_setup_phb_io(struct pci_controller *hose, int primary) -{ - unsigned long size = hose->pci_io_size; - unsigned long io_virt_offset; - struct resource *res; - struct device_node *isa_dn; - - hose->io_base_virt = reserve_phb_iospace(size); - DBG("phb%d io_base_phys 0x%lx io_base_virt 0x%lx\n", - hose->global_number, hose->io_base_phys, - (unsigned long) hose->io_base_virt); - - if (primary) { - pci_io_base = (unsigned long)hose->io_base_virt; - isa_dn = of_find_node_by_type(NULL, "isa"); - if (isa_dn) { - isa_io_base = pci_io_base; - pci_process_ISA_OF_ranges(isa_dn, hose->io_base_phys, - hose->io_base_virt); - of_node_put(isa_dn); - /* Allow all IO */ - io_page_mask = -1; - } - } - - io_virt_offset = (unsigned long)hose->io_base_virt - pci_io_base; - res = &hose->io_resource; - res->start += io_virt_offset; - res->end += io_virt_offset; -} - -void __devinit pci_setup_phb_io_dynamic(struct pci_controller *hose, - int primary) -{ - unsigned long size = hose->pci_io_size; - unsigned long io_virt_offset; - struct resource *res; - - hose->io_base_virt = __ioremap(hose->io_base_phys, size, - _PAGE_NO_CACHE | _PAGE_GUARDED); - DBG("phb%d io_base_phys 0x%lx io_base_virt 0x%lx\n", - hose->global_number, hose->io_base_phys, - (unsigned long) hose->io_base_virt); - - if (primary) - pci_io_base = (unsigned long)hose->io_base_virt; - - io_virt_offset = (unsigned long)hose->io_base_virt - pci_io_base; - res = &hose->io_resource; - res->start += io_virt_offset; - res->end += io_virt_offset; -} - - -static int get_bus_io_range(struct pci_bus *bus, unsigned long *start_phys, - unsigned long *start_virt, unsigned long *size) -{ - struct pci_controller *hose = pci_bus_to_host(bus); - struct pci_bus_region region; - struct resource *res; - - if (bus->self) { - res = bus->resource[0]; - pcibios_resource_to_bus(bus->self, ®ion, res); - *start_phys = hose->io_base_phys + region.start; - *start_virt = (unsigned long) hose->io_base_virt + - region.start; - if (region.end > region.start) - *size = region.end - region.start + 1; - else { - printk("%s(): unexpected region 0x%lx->0x%lx\n", - __FUNCTION__, region.start, region.end); - return 1; - } - - } else { - /* Root Bus */ - res = &hose->io_resource; - *start_phys = hose->io_base_phys; - *start_virt = (unsigned long) hose->io_base_virt; - if (res->end > res->start) - *size = res->end - res->start + 1; - else { - printk("%s(): unexpected region 0x%lx->0x%lx\n", - __FUNCTION__, res->start, res->end); - return 1; - } - } - - return 0; -} - -int unmap_bus_range(struct pci_bus *bus) -{ - unsigned long start_phys; - unsigned long start_virt; - unsigned long size; - - if (!bus) { - printk(KERN_ERR "%s() expected bus\n", __FUNCTION__); - return 1; - } - - if (get_bus_io_range(bus, &start_phys, &start_virt, &size)) - return 1; - if (iounmap_explicit((void __iomem *) start_virt, size)) - return 1; - - return 0; -} -EXPORT_SYMBOL(unmap_bus_range); - -int remap_bus_range(struct pci_bus *bus) -{ - unsigned long start_phys; - unsigned long start_virt; - unsigned long size; - - if (!bus) { - printk(KERN_ERR "%s() expected bus\n", __FUNCTION__); - return 1; - } - - - if (get_bus_io_range(bus, &start_phys, &start_virt, &size)) - return 1; - printk("mapping IO %lx -> %lx, size: %lx\n", start_phys, start_virt, size); - if (__ioremap_explicit(start_phys, start_virt, size, - _PAGE_NO_CACHE | _PAGE_GUARDED)) - return 1; - - return 0; -} -EXPORT_SYMBOL(remap_bus_range); - -void phbs_remap_io(void) -{ - struct pci_controller *hose, *tmp; - - list_for_each_entry_safe(hose, tmp, &hose_list, list_node) - remap_bus_range(hose->bus); -} - -/* - * ppc64 can have multifunction devices that do not respond to function 0. - * In this case we must scan all functions. - * XXX this can go now, we use the OF device tree in all the - * cases that caused problems. -- paulus - */ -int pcibios_scan_all_fns(struct pci_bus *bus, int devfn) -{ - return 0; -} - -static void __devinit fixup_resource(struct resource *res, struct pci_dev *dev) -{ - struct pci_controller *hose = pci_bus_to_host(dev->bus); - unsigned long start, end, mask, offset; - - if (res->flags & IORESOURCE_IO) { - offset = (unsigned long)hose->io_base_virt - pci_io_base; - - start = res->start += offset; - end = res->end += offset; - - /* Need to allow IO access to pages that are in the - ISA range */ - if (start < MAX_ISA_PORT) { - if (end > MAX_ISA_PORT) - end = MAX_ISA_PORT; - - start >>= PAGE_SHIFT; - end >>= PAGE_SHIFT; - - /* get the range of pages for the map */ - mask = ((1 << (end+1)) - 1) ^ ((1 << start) - 1); - io_page_mask |= mask; - } - } else if (res->flags & IORESOURCE_MEM) { - res->start += hose->pci_mem_offset; - res->end += hose->pci_mem_offset; - } -} - -void __devinit pcibios_fixup_device_resources(struct pci_dev *dev, - struct pci_bus *bus) -{ - /* Update device resources. */ - int i; - - for (i = 0; i < PCI_NUM_RESOURCES; i++) - if (dev->resource[i].flags) - fixup_resource(&dev->resource[i], dev); -} -EXPORT_SYMBOL(pcibios_fixup_device_resources); - -static void __devinit do_bus_setup(struct pci_bus *bus) -{ - struct pci_dev *dev; - - ppc_md.iommu_bus_setup(bus); - - list_for_each_entry(dev, &bus->devices, bus_list) - ppc_md.iommu_dev_setup(dev); - - if (ppc_md.irq_bus_setup) - ppc_md.irq_bus_setup(bus); -} - -void __devinit pcibios_fixup_bus(struct pci_bus *bus) -{ - struct pci_dev *dev = bus->self; - - if (dev && pci_probe_only && - (dev->class >> 8) == PCI_CLASS_BRIDGE_PCI) { - /* This is a subordinate bridge */ - - pci_read_bridge_bases(bus); - pcibios_fixup_device_resources(dev, bus); - } - - do_bus_setup(bus); - - if (!pci_probe_only) - return; - - list_for_each_entry(dev, &bus->devices, bus_list) - if ((dev->class >> 8) != PCI_CLASS_BRIDGE_PCI) - pcibios_fixup_device_resources(dev, bus); -} -EXPORT_SYMBOL(pcibios_fixup_bus); - -/* - * Reads the interrupt pin to determine if interrupt is use by card. - * If the interrupt is used, then gets the interrupt line from the - * openfirmware and sets it in the pci_dev and pci_config line. - */ -int pci_read_irq_line(struct pci_dev *pci_dev) -{ - u8 intpin; - struct device_node *node; - - pci_read_config_byte(pci_dev, PCI_INTERRUPT_PIN, &intpin); - if (intpin == 0) - return 0; - - node = pci_device_to_OF_node(pci_dev); - if (node == NULL) - return -1; - - if (node->n_intrs == 0) - return -1; - - pci_dev->irq = node->intrs[0].line; - - pci_write_config_byte(pci_dev, PCI_INTERRUPT_LINE, pci_dev->irq); - - return 0; -} -EXPORT_SYMBOL(pci_read_irq_line); - -void pci_resource_to_user(const struct pci_dev *dev, int bar, - const struct resource *rsrc, - u64 *start, u64 *end) -{ - struct pci_controller *hose = pci_bus_to_host(dev->bus); - unsigned long offset = 0; - - if (hose == NULL) - return; - - if (rsrc->flags & IORESOURCE_IO) - offset = pci_io_base - (unsigned long)hose->io_base_virt + - hose->io_base_phys; - - *start = rsrc->start + offset; - *end = rsrc->end + offset; -} - -#endif /* CONFIG_PPC_MULTIPLATFORM */ - - -#define IOBASE_BRIDGE_NUMBER 0 -#define IOBASE_MEMORY 1 -#define IOBASE_IO 2 -#define IOBASE_ISA_IO 3 -#define IOBASE_ISA_MEM 4 - -long sys_pciconfig_iobase(long which, unsigned long in_bus, - unsigned long in_devfn) -{ - struct pci_controller* hose; - struct list_head *ln; - struct pci_bus *bus = NULL; - struct device_node *hose_node; - - /* Argh ! Please forgive me for that hack, but that's the - * simplest way to get existing XFree to not lockup on some - * G5 machines... So when something asks for bus 0 io base - * (bus 0 is HT root), we return the AGP one instead. - */ -#ifdef CONFIG_PPC_PMAC - if (systemcfg->platform == PLATFORM_POWERMAC && - machine_is_compatible("MacRISC4")) - if (in_bus == 0) - in_bus = 0xf0; -#endif /* CONFIG_PPC_PMAC */ - - /* That syscall isn't quite compatible with PCI domains, but it's - * used on pre-domains setup. We return the first match - */ - - for (ln = pci_root_buses.next; ln != &pci_root_buses; ln = ln->next) { - bus = pci_bus_b(ln); - if (in_bus >= bus->number && in_bus < (bus->number + bus->subordinate)) - break; - bus = NULL; - } - if (bus == NULL || bus->sysdata == NULL) - return -ENODEV; - - hose_node = (struct device_node *)bus->sysdata; - hose = PCI_DN(hose_node)->phb; - - switch (which) { - case IOBASE_BRIDGE_NUMBER: - return (long)hose->first_busno; - case IOBASE_MEMORY: - return (long)hose->pci_mem_offset; - case IOBASE_IO: - return (long)hose->io_base_phys; - case IOBASE_ISA_IO: - return (long)isa_io_base; - case IOBASE_ISA_MEM: - return -EINVAL; - } - - return -EOPNOTSUPP; -} diff --git a/arch/ppc64/kernel/pci_direct_iommu.c b/arch/ppc64/kernel/pci_direct_iommu.c deleted file mode 100644 index e1a32f802c0b..000000000000 --- a/arch/ppc64/kernel/pci_direct_iommu.c +++ /dev/null @@ -1,94 +0,0 @@ -/* - * Support for DMA from PCI devices to main memory on - * machines without an iommu or with directly addressable - * RAM (typically a pmac with 2Gb of RAM or less) - * - * Copyright (C) 2003 Benjamin Herrenschmidt (benh@kernel.crashing.org) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include <linux/kernel.h> -#include <linux/pci.h> -#include <linux/delay.h> -#include <linux/string.h> -#include <linux/init.h> -#include <linux/bootmem.h> -#include <linux/mm.h> -#include <linux/dma-mapping.h> - -#include <asm/sections.h> -#include <asm/io.h> -#include <asm/prom.h> -#include <asm/pci-bridge.h> -#include <asm/machdep.h> -#include <asm/pmac_feature.h> -#include <asm/abs_addr.h> -#include <asm/ppc-pci.h> - -static void *pci_direct_alloc_coherent(struct device *hwdev, size_t size, - dma_addr_t *dma_handle, gfp_t flag) -{ - void *ret; - - ret = (void *)__get_free_pages(flag, get_order(size)); - if (ret != NULL) { - memset(ret, 0, size); - *dma_handle = virt_to_abs(ret); - } - return ret; -} - -static void pci_direct_free_coherent(struct device *hwdev, size_t size, - void *vaddr, dma_addr_t dma_handle) -{ - free_pages((unsigned long)vaddr, get_order(size)); -} - -static dma_addr_t pci_direct_map_single(struct device *hwdev, void *ptr, - size_t size, enum dma_data_direction direction) -{ - return virt_to_abs(ptr); -} - -static void pci_direct_unmap_single(struct device *hwdev, dma_addr_t dma_addr, - size_t size, enum dma_data_direction direction) -{ -} - -static int pci_direct_map_sg(struct device *hwdev, struct scatterlist *sg, - int nents, enum dma_data_direction direction) -{ - int i; - - for (i = 0; i < nents; i++, sg++) { - sg->dma_address = page_to_phys(sg->page) + sg->offset; - sg->dma_length = sg->length; - } - - return nents; -} - -static void pci_direct_unmap_sg(struct device *hwdev, struct scatterlist *sg, - int nents, enum dma_data_direction direction) -{ -} - -static int pci_direct_dma_supported(struct device *dev, u64 mask) -{ - return mask < 0x100000000ull; -} - -void __init pci_direct_iommu_init(void) -{ - pci_dma_ops.alloc_coherent = pci_direct_alloc_coherent; - pci_dma_ops.free_coherent = pci_direct_free_coherent; - pci_dma_ops.map_single = pci_direct_map_single; - pci_dma_ops.unmap_single = pci_direct_unmap_single; - pci_dma_ops.map_sg = pci_direct_map_sg; - pci_dma_ops.unmap_sg = pci_direct_unmap_sg; - pci_dma_ops.dma_supported = pci_direct_dma_supported; -} diff --git a/arch/ppc64/kernel/pci_dn.c b/arch/ppc64/kernel/pci_dn.c deleted file mode 100644 index 1a443a7ada4c..000000000000 --- a/arch/ppc64/kernel/pci_dn.c +++ /dev/null @@ -1,217 +0,0 @@ -/* - * pci_dn.c - * - * Copyright (C) 2001 Todd Inglett, IBM Corporation - * - * PCI manipulation via device_nodes. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#include <linux/kernel.h> -#include <linux/pci.h> -#include <linux/string.h> -#include <linux/init.h> -#include <linux/slab.h> -#include <linux/bootmem.h> - -#include <asm/io.h> -#include <asm/prom.h> -#include <asm/pci-bridge.h> -#include <asm/pSeries_reconfig.h> -#include <asm/ppc-pci.h> - -/* - * Traverse_func that inits the PCI fields of the device node. - * NOTE: this *must* be done before read/write config to the device. - */ -static void * __devinit update_dn_pci_info(struct device_node *dn, void *data) -{ - struct pci_controller *phb = data; - int *type = (int *)get_property(dn, "ibm,pci-config-space-type", NULL); - u32 *regs; - struct pci_dn *pdn; - - if (phb->is_dynamic) - pdn = kmalloc(sizeof(*pdn), GFP_KERNEL); - else - pdn = alloc_bootmem(sizeof(*pdn)); - if (pdn == NULL) - return NULL; - memset(pdn, 0, sizeof(*pdn)); - dn->data = pdn; - pdn->node = dn; - pdn->phb = phb; - regs = (u32 *)get_property(dn, "reg", NULL); - if (regs) { - /* First register entry is addr (00BBSS00) */ - pdn->busno = (regs[0] >> 16) & 0xff; - pdn->devfn = (regs[0] >> 8) & 0xff; - } - - pdn->pci_ext_config_space = (type && *type == 1); - return NULL; -} - -/* - * Traverse a device tree stopping each PCI device in the tree. - * This is done depth first. As each node is processed, a "pre" - * function is called and the children are processed recursively. - * - * The "pre" func returns a value. If non-zero is returned from - * the "pre" func, the traversal stops and this value is returned. - * This return value is useful when using traverse as a method of - * finding a device. - * - * NOTE: we do not run the func for devices that do not appear to - * be PCI except for the start node which we assume (this is good - * because the start node is often a phb which may be missing PCI - * properties). - * We use the class-code as an indicator. If we run into - * one of these nodes we also assume its siblings are non-pci for - * performance. - */ -void *traverse_pci_devices(struct device_node *start, traverse_func pre, - void *data) -{ - struct device_node *dn, *nextdn; - void *ret; - - /* We started with a phb, iterate all childs */ - for (dn = start->child; dn; dn = nextdn) { - u32 *classp, class; - - nextdn = NULL; - classp = (u32 *)get_property(dn, "class-code", NULL); - class = classp ? *classp : 0; - - if (pre && ((ret = pre(dn, data)) != NULL)) - return ret; - - /* If we are a PCI bridge, go down */ - if (dn->child && ((class >> 8) == PCI_CLASS_BRIDGE_PCI || - (class >> 8) == PCI_CLASS_BRIDGE_CARDBUS)) - /* Depth first...do children */ - nextdn = dn->child; - else if (dn->sibling) - /* ok, try next sibling instead. */ - nextdn = dn->sibling; - if (!nextdn) { - /* Walk up to next valid sibling. */ - do { - dn = dn->parent; - if (dn == start) - return NULL; - } while (dn->sibling == NULL); - nextdn = dn->sibling; - } - } - return NULL; -} - -void __devinit pci_devs_phb_init_dynamic(struct pci_controller *phb) -{ - struct device_node * dn = (struct device_node *) phb->arch_data; - struct pci_dn *pdn; - - /* PHB nodes themselves must not match */ - update_dn_pci_info(dn, phb); - pdn = dn->data; - if (pdn) { - pdn->devfn = pdn->busno = -1; - pdn->phb = phb; - } - - /* Update dn->phb ptrs for new phb and children devices */ - traverse_pci_devices(dn, update_dn_pci_info, phb); -} - -/* - * Traversal func that looks for a <busno,devfcn> value. - * If found, the pci_dn is returned (thus terminating the traversal). - */ -static void *is_devfn_node(struct device_node *dn, void *data) -{ - int busno = ((unsigned long)data >> 8) & 0xff; - int devfn = ((unsigned long)data) & 0xff; - struct pci_dn *pci = dn->data; - - if (pci && (devfn == pci->devfn) && (busno == pci->busno)) - return dn; - return NULL; -} - -/* - * This is the "slow" path for looking up a device_node from a - * pci_dev. It will hunt for the device under its parent's - * phb and then update sysdata for a future fastpath. - * - * It may also do fixups on the actual device since this happens - * on the first read/write. - * - * Note that it also must deal with devices that don't exist. - * In this case it may probe for real hardware ("just in case") - * and add a device_node to the device tree if necessary. - * - */ -struct device_node *fetch_dev_dn(struct pci_dev *dev) -{ - struct device_node *orig_dn = dev->sysdata; - struct device_node *dn; - unsigned long searchval = (dev->bus->number << 8) | dev->devfn; - - dn = traverse_pci_devices(orig_dn, is_devfn_node, (void *)searchval); - if (dn) - dev->sysdata = dn; - return dn; -} -EXPORT_SYMBOL(fetch_dev_dn); - -static int pci_dn_reconfig_notifier(struct notifier_block *nb, unsigned long action, void *node) -{ - struct device_node *np = node; - struct pci_dn *pci = NULL; - int err = NOTIFY_OK; - - switch (action) { - case PSERIES_RECONFIG_ADD: - pci = np->parent->data; - if (pci) - update_dn_pci_info(np, pci->phb); - break; - default: - err = NOTIFY_DONE; - break; - } - return err; -} - -static struct notifier_block pci_dn_reconfig_nb = { - .notifier_call = pci_dn_reconfig_notifier, -}; - -/* - * Actually initialize the phbs. - * The buswalk on this phb has not happened yet. - */ -void __init pci_devs_phb_init(void) -{ - struct pci_controller *phb, *tmp; - - /* This must be done first so the device nodes have valid pci info! */ - list_for_each_entry_safe(phb, tmp, &hose_list, list_node) - pci_devs_phb_init_dynamic(phb); - - pSeries_reconfig_notifier_register(&pci_dn_reconfig_nb); -} diff --git a/arch/ppc64/kernel/pci_iommu.c b/arch/ppc64/kernel/pci_iommu.c deleted file mode 100644 index bdf15dbbf4f0..000000000000 --- a/arch/ppc64/kernel/pci_iommu.c +++ /dev/null @@ -1,128 +0,0 @@ -/* - * arch/ppc64/kernel/pci_iommu.c - * Copyright (C) 2001 Mike Corrigan & Dave Engebretsen, IBM Corporation - * - * Rewrite, cleanup, new allocation schemes: - * Copyright (C) 2004 Olof Johansson, IBM Corporation - * - * Dynamic DMA mapping support, platform-independent parts. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - - -#include <linux/init.h> -#include <linux/types.h> -#include <linux/slab.h> -#include <linux/mm.h> -#include <linux/spinlock.h> -#include <linux/string.h> -#include <linux/pci.h> -#include <linux/dma-mapping.h> -#include <asm/io.h> -#include <asm/prom.h> -#include <asm/iommu.h> -#include <asm/pci-bridge.h> -#include <asm/machdep.h> -#include <asm/ppc-pci.h> - -/* - * We can use ->sysdata directly and avoid the extra work in - * pci_device_to_OF_node since ->sysdata will have been initialised - * in the iommu init code for all devices. - */ -#define PCI_GET_DN(dev) ((struct device_node *)((dev)->sysdata)) - -static inline struct iommu_table *devnode_table(struct device *dev) -{ - struct pci_dev *pdev; - - if (!dev) { - pdev = ppc64_isabridge_dev; - if (!pdev) - return NULL; - } else - pdev = to_pci_dev(dev); - - return PCI_DN(PCI_GET_DN(pdev))->iommu_table; -} - - -/* Allocates a contiguous real buffer and creates mappings over it. - * Returns the virtual address of the buffer and sets dma_handle - * to the dma address (mapping) of the first page. - */ -static void *pci_iommu_alloc_coherent(struct device *hwdev, size_t size, - dma_addr_t *dma_handle, gfp_t flag) -{ - return iommu_alloc_coherent(devnode_table(hwdev), size, dma_handle, - flag); -} - -static void pci_iommu_free_coherent(struct device *hwdev, size_t size, - void *vaddr, dma_addr_t dma_handle) -{ - iommu_free_coherent(devnode_table(hwdev), size, vaddr, dma_handle); -} - -/* Creates TCEs for a user provided buffer. The user buffer must be - * contiguous real kernel storage (not vmalloc). The address of the buffer - * passed here is the kernel (virtual) address of the buffer. The buffer - * need not be page aligned, the dma_addr_t returned will point to the same - * byte within the page as vaddr. - */ -static dma_addr_t pci_iommu_map_single(struct device *hwdev, void *vaddr, - size_t size, enum dma_data_direction direction) -{ - return iommu_map_single(devnode_table(hwdev), vaddr, size, direction); -} - - -static void pci_iommu_unmap_single(struct device *hwdev, dma_addr_t dma_handle, - size_t size, enum dma_data_direction direction) -{ - iommu_unmap_single(devnode_table(hwdev), dma_handle, size, direction); -} - - -static int pci_iommu_map_sg(struct device *pdev, struct scatterlist *sglist, - int nelems, enum dma_data_direction direction) -{ - return iommu_map_sg(pdev, devnode_table(pdev), sglist, - nelems, direction); -} - -static void pci_iommu_unmap_sg(struct device *pdev, struct scatterlist *sglist, - int nelems, enum dma_data_direction direction) -{ - iommu_unmap_sg(devnode_table(pdev), sglist, nelems, direction); -} - -/* We support DMA to/from any memory page via the iommu */ -static int pci_iommu_dma_supported(struct device *dev, u64 mask) -{ - return 1; -} - -void pci_iommu_init(void) -{ - pci_dma_ops.alloc_coherent = pci_iommu_alloc_coherent; - pci_dma_ops.free_coherent = pci_iommu_free_coherent; - pci_dma_ops.map_single = pci_iommu_map_single; - pci_dma_ops.unmap_single = pci_iommu_unmap_single; - pci_dma_ops.map_sg = pci_iommu_map_sg; - pci_dma_ops.unmap_sg = pci_iommu_unmap_sg; - pci_dma_ops.dma_supported = pci_iommu_dma_supported; -} diff --git a/arch/ppc64/kernel/ppc_ksyms.c b/arch/ppc64/kernel/ppc_ksyms.c deleted file mode 100644 index 84006e26342c..000000000000 --- a/arch/ppc64/kernel/ppc_ksyms.c +++ /dev/null @@ -1,76 +0,0 @@ -/* - * c 2001 PPC 64 Team, IBM Corp - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#include <linux/config.h> -#include <linux/module.h> -#include <linux/string.h> -#include <linux/console.h> -#include <net/checksum.h> - -#include <asm/processor.h> -#include <asm/uaccess.h> -#include <asm/io.h> -#include <asm/system.h> -#include <asm/hw_irq.h> -#include <asm/abs_addr.h> -#include <asm/cacheflush.h> - -EXPORT_SYMBOL(strcpy); -EXPORT_SYMBOL(strncpy); -EXPORT_SYMBOL(strcat); -EXPORT_SYMBOL(strncat); -EXPORT_SYMBOL(strchr); -EXPORT_SYMBOL(strrchr); -EXPORT_SYMBOL(strpbrk); -EXPORT_SYMBOL(strstr); -EXPORT_SYMBOL(strlen); -EXPORT_SYMBOL(strnlen); -EXPORT_SYMBOL(strcmp); -EXPORT_SYMBOL(strncmp); - -EXPORT_SYMBOL(csum_partial); -EXPORT_SYMBOL(csum_partial_copy_generic); -EXPORT_SYMBOL(ip_fast_csum); -EXPORT_SYMBOL(csum_tcpudp_magic); - -EXPORT_SYMBOL(__copy_tofrom_user); -EXPORT_SYMBOL(__clear_user); -EXPORT_SYMBOL(__strncpy_from_user); -EXPORT_SYMBOL(__strnlen_user); - -EXPORT_SYMBOL(reloc_offset); - -EXPORT_SYMBOL(_insb); -EXPORT_SYMBOL(_outsb); -EXPORT_SYMBOL(_insw); -EXPORT_SYMBOL(_outsw); -EXPORT_SYMBOL(_insl); -EXPORT_SYMBOL(_outsl); -EXPORT_SYMBOL(_insw_ns); -EXPORT_SYMBOL(_outsw_ns); -EXPORT_SYMBOL(_insl_ns); -EXPORT_SYMBOL(_outsl_ns); - -EXPORT_SYMBOL(kernel_thread); - -EXPORT_SYMBOL(giveup_fpu); -#ifdef CONFIG_ALTIVEC -EXPORT_SYMBOL(giveup_altivec); -#endif -EXPORT_SYMBOL(__flush_icache_range); -EXPORT_SYMBOL(flush_dcache_range); - -EXPORT_SYMBOL(memcpy); -EXPORT_SYMBOL(memset); -EXPORT_SYMBOL(memmove); -EXPORT_SYMBOL(memscan); -EXPORT_SYMBOL(memcmp); -EXPORT_SYMBOL(memchr); - -EXPORT_SYMBOL(timer_interrupt); -EXPORT_SYMBOL(console_drivers); diff --git a/arch/ppc64/kernel/proc_ppc64.c b/arch/ppc64/kernel/proc_ppc64.c deleted file mode 100644 index 24e955ee9487..000000000000 --- a/arch/ppc64/kernel/proc_ppc64.c +++ /dev/null @@ -1,128 +0,0 @@ -/* - * arch/ppc64/kernel/proc_ppc64.c - * - * Copyright (C) 2001 Mike Corrigan & Dave Engebretsen IBM Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/config.h> -#include <linux/init.h> -#include <linux/mm.h> -#include <linux/proc_fs.h> -#include <linux/slab.h> -#include <linux/kernel.h> - -#include <asm/systemcfg.h> -#include <asm/rtas.h> -#include <asm/uaccess.h> -#include <asm/prom.h> - -static loff_t page_map_seek( struct file *file, loff_t off, int whence); -static ssize_t page_map_read( struct file *file, char __user *buf, size_t nbytes, - loff_t *ppos); -static int page_map_mmap( struct file *file, struct vm_area_struct *vma ); - -static struct file_operations page_map_fops = { - .llseek = page_map_seek, - .read = page_map_read, - .mmap = page_map_mmap -}; - -/* - * Create the ppc64 and ppc64/rtas directories early. This allows us to - * assume that they have been previously created in drivers. - */ -static int __init proc_ppc64_create(void) -{ - struct proc_dir_entry *root; - - root = proc_mkdir("ppc64", NULL); - if (!root) - return 1; - - if (!(systemcfg->platform & (PLATFORM_PSERIES | PLATFORM_CELL))) - return 0; - - if (!proc_mkdir("rtas", root)) - return 1; - - if (!proc_symlink("rtas", NULL, "ppc64/rtas")) - return 1; - - return 0; -} -core_initcall(proc_ppc64_create); - -static int __init proc_ppc64_init(void) -{ - struct proc_dir_entry *pde; - - pde = create_proc_entry("ppc64/systemcfg", S_IFREG|S_IRUGO, NULL); - if (!pde) - return 1; - pde->nlink = 1; - pde->data = systemcfg; - pde->size = PAGE_SIZE; - pde->proc_fops = &page_map_fops; - - return 0; -} -__initcall(proc_ppc64_init); - -static loff_t page_map_seek( struct file *file, loff_t off, int whence) -{ - loff_t new; - struct proc_dir_entry *dp = PDE(file->f_dentry->d_inode); - - switch(whence) { - case 0: - new = off; - break; - case 1: - new = file->f_pos + off; - break; - case 2: - new = dp->size + off; - break; - default: - return -EINVAL; - } - if ( new < 0 || new > dp->size ) - return -EINVAL; - return (file->f_pos = new); -} - -static ssize_t page_map_read( struct file *file, char __user *buf, size_t nbytes, - loff_t *ppos) -{ - struct proc_dir_entry *dp = PDE(file->f_dentry->d_inode); - return simple_read_from_buffer(buf, nbytes, ppos, dp->data, dp->size); -} - -static int page_map_mmap( struct file *file, struct vm_area_struct *vma ) -{ - struct proc_dir_entry *dp = PDE(file->f_dentry->d_inode); - - vma->vm_flags |= VM_SHM | VM_LOCKED; - - if ((vma->vm_end - vma->vm_start) > dp->size) - return -EINVAL; - - remap_pfn_range(vma, vma->vm_start, __pa(dp->data) >> PAGE_SHIFT, - dp->size, vma->vm_page_prot); - return 0; -} - diff --git a/arch/ppc64/kernel/prom.c b/arch/ppc64/kernel/prom.c deleted file mode 100644 index dece31e58bc4..000000000000 --- a/arch/ppc64/kernel/prom.c +++ /dev/null @@ -1,1942 +0,0 @@ -/* - * - * - * Procedures for interfacing to Open Firmware. - * - * Paul Mackerras August 1996. - * Copyright (C) 1996 Paul Mackerras. - * - * Adapted for 64bit PowerPC by Dave Engebretsen and Peter Bergner. - * {engebret|bergner}@us.ibm.com - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#undef DEBUG - -#include <stdarg.h> -#include <linux/config.h> -#include <linux/kernel.h> -#include <linux/string.h> -#include <linux/init.h> -#include <linux/threads.h> -#include <linux/spinlock.h> -#include <linux/types.h> -#include <linux/pci.h> -#include <linux/stringify.h> -#include <linux/delay.h> -#include <linux/initrd.h> -#include <linux/bitops.h> -#include <linux/module.h> - -#include <asm/prom.h> -#include <asm/rtas.h> -#include <asm/lmb.h> -#include <asm/abs_addr.h> -#include <asm/page.h> -#include <asm/processor.h> -#include <asm/irq.h> -#include <asm/io.h> -#include <asm/smp.h> -#include <asm/system.h> -#include <asm/mmu.h> -#include <asm/pgtable.h> -#include <asm/pci.h> -#include <asm/iommu.h> -#include <asm/ppcdebug.h> -#include <asm/btext.h> -#include <asm/sections.h> -#include <asm/machdep.h> -#include <asm/pSeries_reconfig.h> - -#ifdef DEBUG -#define DBG(fmt...) udbg_printf(fmt) -#else -#define DBG(fmt...) -#endif - -struct pci_reg_property { - struct pci_address addr; - u32 size_hi; - u32 size_lo; -}; - -struct isa_reg_property { - u32 space; - u32 address; - u32 size; -}; - - -typedef int interpret_func(struct device_node *, unsigned long *, - int, int, int); - -extern struct rtas_t rtas; -extern struct lmb lmb; -extern unsigned long klimit; -extern unsigned long memory_limit; - -static int __initdata dt_root_addr_cells; -static int __initdata dt_root_size_cells; -static int __initdata iommu_is_off; -int __initdata iommu_force_on; -unsigned long tce_alloc_start, tce_alloc_end; - -typedef u32 cell_t; - -#if 0 -static struct boot_param_header *initial_boot_params __initdata; -#else -struct boot_param_header *initial_boot_params; -#endif - -static struct device_node *allnodes = NULL; - -/* use when traversing tree through the allnext, child, sibling, - * or parent members of struct device_node. - */ -static DEFINE_RWLOCK(devtree_lock); - -/* export that to outside world */ -struct device_node *of_chosen; - -/* - * Wrapper for allocating memory for various data that needs to be - * attached to device nodes as they are processed at boot or when - * added to the device tree later (e.g. DLPAR). At boot there is - * already a region reserved so we just increment *mem_start by size; - * otherwise we call kmalloc. - */ -static void * prom_alloc(unsigned long size, unsigned long *mem_start) -{ - unsigned long tmp; - - if (!mem_start) - return kmalloc(size, GFP_KERNEL); - - tmp = *mem_start; - *mem_start += size; - return (void *)tmp; -} - -/* - * Find the device_node with a given phandle. - */ -static struct device_node * find_phandle(phandle ph) -{ - struct device_node *np; - - for (np = allnodes; np != 0; np = np->allnext) - if (np->linux_phandle == ph) - return np; - return NULL; -} - -/* - * Find the interrupt parent of a node. - */ -static struct device_node * __devinit intr_parent(struct device_node *p) -{ - phandle *parp; - - parp = (phandle *) get_property(p, "interrupt-parent", NULL); - if (parp == NULL) - return p->parent; - return find_phandle(*parp); -} - -/* - * Find out the size of each entry of the interrupts property - * for a node. - */ -int __devinit prom_n_intr_cells(struct device_node *np) -{ - struct device_node *p; - unsigned int *icp; - - for (p = np; (p = intr_parent(p)) != NULL; ) { - icp = (unsigned int *) - get_property(p, "#interrupt-cells", NULL); - if (icp != NULL) - return *icp; - if (get_property(p, "interrupt-controller", NULL) != NULL - || get_property(p, "interrupt-map", NULL) != NULL) { - printk("oops, node %s doesn't have #interrupt-cells\n", - p->full_name); - return 1; - } - } -#ifdef DEBUG_IRQ - printk("prom_n_intr_cells failed for %s\n", np->full_name); -#endif - return 1; -} - -/* - * Map an interrupt from a device up to the platform interrupt - * descriptor. - */ -static int __devinit map_interrupt(unsigned int **irq, struct device_node **ictrler, - struct device_node *np, unsigned int *ints, - int nintrc) -{ - struct device_node *p, *ipar; - unsigned int *imap, *imask, *ip; - int i, imaplen, match; - int newintrc = 0, newaddrc = 0; - unsigned int *reg; - int naddrc; - - reg = (unsigned int *) get_property(np, "reg", NULL); - naddrc = prom_n_addr_cells(np); - p = intr_parent(np); - while (p != NULL) { - if (get_property(p, "interrupt-controller", NULL) != NULL) - /* this node is an interrupt controller, stop here */ - break; - imap = (unsigned int *) - get_property(p, "interrupt-map", &imaplen); - if (imap == NULL) { - p = intr_parent(p); - continue; - } - imask = (unsigned int *) - get_property(p, "interrupt-map-mask", NULL); - if (imask == NULL) { - printk("oops, %s has interrupt-map but no mask\n", - p->full_name); - return 0; - } - imaplen /= sizeof(unsigned int); - match = 0; - ipar = NULL; - while (imaplen > 0 && !match) { - /* check the child-interrupt field */ - match = 1; - for (i = 0; i < naddrc && match; ++i) - match = ((reg[i] ^ imap[i]) & imask[i]) == 0; - for (; i < naddrc + nintrc && match; ++i) - match = ((ints[i-naddrc] ^ imap[i]) & imask[i]) == 0; - imap += naddrc + nintrc; - imaplen -= naddrc + nintrc; - /* grab the interrupt parent */ - ipar = find_phandle((phandle) *imap++); - --imaplen; - if (ipar == NULL) { - printk("oops, no int parent %x in map of %s\n", - imap[-1], p->full_name); - return 0; - } - /* find the parent's # addr and intr cells */ - ip = (unsigned int *) - get_property(ipar, "#interrupt-cells", NULL); - if (ip == NULL) { - printk("oops, no #interrupt-cells on %s\n", - ipar->full_name); - return 0; - } - newintrc = *ip; - ip = (unsigned int *) - get_property(ipar, "#address-cells", NULL); - newaddrc = (ip == NULL)? 0: *ip; - imap += newaddrc + newintrc; - imaplen -= newaddrc + newintrc; - } - if (imaplen < 0) { - printk("oops, error decoding int-map on %s, len=%d\n", - p->full_name, imaplen); - return 0; - } - if (!match) { -#ifdef DEBUG_IRQ - printk("oops, no match in %s int-map for %s\n", - p->full_name, np->full_name); -#endif - return 0; - } - p = ipar; - naddrc = newaddrc; - nintrc = newintrc; - ints = imap - nintrc; - reg = ints - naddrc; - } - if (p == NULL) { -#ifdef DEBUG_IRQ - printk("hmmm, int tree for %s doesn't have ctrler\n", - np->full_name); -#endif - return 0; - } - *irq = ints; - *ictrler = p; - return nintrc; -} - -static int __devinit finish_node_interrupts(struct device_node *np, - unsigned long *mem_start, - int measure_only) -{ - unsigned int *ints; - int intlen, intrcells, intrcount; - int i, j, n; - unsigned int *irq, virq; - struct device_node *ic; - - ints = (unsigned int *) get_property(np, "interrupts", &intlen); - if (ints == NULL) - return 0; - intrcells = prom_n_intr_cells(np); - intlen /= intrcells * sizeof(unsigned int); - - np->intrs = prom_alloc(intlen * sizeof(*(np->intrs)), mem_start); - if (!np->intrs) - return -ENOMEM; - - if (measure_only) - return 0; - - intrcount = 0; - for (i = 0; i < intlen; ++i, ints += intrcells) { - n = map_interrupt(&irq, &ic, np, ints, intrcells); - if (n <= 0) - continue; - - /* don't map IRQ numbers under a cascaded 8259 controller */ - if (ic && device_is_compatible(ic, "chrp,iic")) { - np->intrs[intrcount].line = irq[0]; - } else { - virq = virt_irq_create_mapping(irq[0]); - if (virq == NO_IRQ) { - printk(KERN_CRIT "Could not allocate interrupt" - " number for %s\n", np->full_name); - continue; - } - np->intrs[intrcount].line = irq_offset_up(virq); - } - - /* We offset irq numbers for the u3 MPIC by 128 in PowerMac */ - if (systemcfg->platform == PLATFORM_POWERMAC && ic && ic->parent) { - char *name = get_property(ic->parent, "name", NULL); - if (name && !strcmp(name, "u3")) - np->intrs[intrcount].line += 128; - else if (!(name && !strcmp(name, "mac-io"))) - /* ignore other cascaded controllers, such as - the k2-sata-root */ - break; - } - np->intrs[intrcount].sense = 1; - if (n > 1) - np->intrs[intrcount].sense = irq[1]; - if (n > 2) { - printk("hmmm, got %d intr cells for %s:", n, - np->full_name); - for (j = 0; j < n; ++j) - printk(" %d", irq[j]); - printk("\n"); - } - ++intrcount; - } - np->n_intrs = intrcount; - - return 0; -} - -static int __devinit interpret_pci_props(struct device_node *np, - unsigned long *mem_start, - int naddrc, int nsizec, - int measure_only) -{ - struct address_range *adr; - struct pci_reg_property *pci_addrs; - int i, l, n_addrs; - - pci_addrs = (struct pci_reg_property *) - get_property(np, "assigned-addresses", &l); - if (!pci_addrs) - return 0; - - n_addrs = l / sizeof(*pci_addrs); - - adr = prom_alloc(n_addrs * sizeof(*adr), mem_start); - if (!adr) - return -ENOMEM; - - if (measure_only) - return 0; - - np->addrs = adr; - np->n_addrs = n_addrs; - - for (i = 0; i < n_addrs; i++) { - adr[i].space = pci_addrs[i].addr.a_hi; - adr[i].address = pci_addrs[i].addr.a_lo | - ((u64)pci_addrs[i].addr.a_mid << 32); - adr[i].size = pci_addrs[i].size_lo; - } - - return 0; -} - -static int __init interpret_dbdma_props(struct device_node *np, - unsigned long *mem_start, - int naddrc, int nsizec, - int measure_only) -{ - struct reg_property32 *rp; - struct address_range *adr; - unsigned long base_address; - int i, l; - struct device_node *db; - - base_address = 0; - if (!measure_only) { - for (db = np->parent; db != NULL; db = db->parent) { - if (!strcmp(db->type, "dbdma") && db->n_addrs != 0) { - base_address = db->addrs[0].address; - break; - } - } - } - - rp = (struct reg_property32 *) get_property(np, "reg", &l); - if (rp != 0 && l >= sizeof(struct reg_property32)) { - i = 0; - adr = (struct address_range *) (*mem_start); - while ((l -= sizeof(struct reg_property32)) >= 0) { - if (!measure_only) { - adr[i].space = 2; - adr[i].address = rp[i].address + base_address; - adr[i].size = rp[i].size; - } - ++i; - } - np->addrs = adr; - np->n_addrs = i; - (*mem_start) += i * sizeof(struct address_range); - } - - return 0; -} - -static int __init interpret_macio_props(struct device_node *np, - unsigned long *mem_start, - int naddrc, int nsizec, - int measure_only) -{ - struct reg_property32 *rp; - struct address_range *adr; - unsigned long base_address; - int i, l; - struct device_node *db; - - base_address = 0; - if (!measure_only) { - for (db = np->parent; db != NULL; db = db->parent) { - if (!strcmp(db->type, "mac-io") && db->n_addrs != 0) { - base_address = db->addrs[0].address; - break; - } - } - } - - rp = (struct reg_property32 *) get_property(np, "reg", &l); - if (rp != 0 && l >= sizeof(struct reg_property32)) { - i = 0; - adr = (struct address_range *) (*mem_start); - while ((l -= sizeof(struct reg_property32)) >= 0) { - if (!measure_only) { - adr[i].space = 2; - adr[i].address = rp[i].address + base_address; - adr[i].size = rp[i].size; - } - ++i; - } - np->addrs = adr; - np->n_addrs = i; - (*mem_start) += i * sizeof(struct address_range); - } - - return 0; -} - -static int __init interpret_isa_props(struct device_node *np, - unsigned long *mem_start, - int naddrc, int nsizec, - int measure_only) -{ - struct isa_reg_property *rp; - struct address_range *adr; - int i, l; - - rp = (struct isa_reg_property *) get_property(np, "reg", &l); - if (rp != 0 && l >= sizeof(struct isa_reg_property)) { - i = 0; - adr = (struct address_range *) (*mem_start); - while ((l -= sizeof(struct isa_reg_property)) >= 0) { - if (!measure_only) { - adr[i].space = rp[i].space; - adr[i].address = rp[i].address; - adr[i].size = rp[i].size; - } - ++i; - } - np->addrs = adr; - np->n_addrs = i; - (*mem_start) += i * sizeof(struct address_range); - } - - return 0; -} - -static int __init interpret_root_props(struct device_node *np, - unsigned long *mem_start, - int naddrc, int nsizec, - int measure_only) -{ - struct address_range *adr; - int i, l; - unsigned int *rp; - int rpsize = (naddrc + nsizec) * sizeof(unsigned int); - - rp = (unsigned int *) get_property(np, "reg", &l); - if (rp != 0 && l >= rpsize) { - i = 0; - adr = (struct address_range *) (*mem_start); - while ((l -= rpsize) >= 0) { - if (!measure_only) { - adr[i].space = 0; - adr[i].address = rp[naddrc - 1]; - adr[i].size = rp[naddrc + nsizec - 1]; - } - ++i; - rp += naddrc + nsizec; - } - np->addrs = adr; - np->n_addrs = i; - (*mem_start) += i * sizeof(struct address_range); - } - - return 0; -} - -static int __devinit finish_node(struct device_node *np, - unsigned long *mem_start, - interpret_func *ifunc, - int naddrc, int nsizec, - int measure_only) -{ - struct device_node *child; - int *ip, rc = 0; - - /* get the device addresses and interrupts */ - if (ifunc != NULL) - rc = ifunc(np, mem_start, naddrc, nsizec, measure_only); - if (rc) - goto out; - - rc = finish_node_interrupts(np, mem_start, measure_only); - if (rc) - goto out; - - /* Look for #address-cells and #size-cells properties. */ - ip = (int *) get_property(np, "#address-cells", NULL); - if (ip != NULL) - naddrc = *ip; - ip = (int *) get_property(np, "#size-cells", NULL); - if (ip != NULL) - nsizec = *ip; - - if (!strcmp(np->name, "device-tree") || np->parent == NULL) - ifunc = interpret_root_props; - else if (np->type == 0) - ifunc = NULL; - else if (!strcmp(np->type, "pci") || !strcmp(np->type, "vci")) - ifunc = interpret_pci_props; - else if (!strcmp(np->type, "dbdma")) - ifunc = interpret_dbdma_props; - else if (!strcmp(np->type, "mac-io") || ifunc == interpret_macio_props) - ifunc = interpret_macio_props; - else if (!strcmp(np->type, "isa")) - ifunc = interpret_isa_props; - else if (!strcmp(np->name, "uni-n") || !strcmp(np->name, "u3")) - ifunc = interpret_root_props; - else if (!((ifunc == interpret_dbdma_props - || ifunc == interpret_macio_props) - && (!strcmp(np->type, "escc") - || !strcmp(np->type, "media-bay")))) - ifunc = NULL; - - for (child = np->child; child != NULL; child = child->sibling) { - rc = finish_node(child, mem_start, ifunc, - naddrc, nsizec, measure_only); - if (rc) - goto out; - } -out: - return rc; -} - -/** - * finish_device_tree is called once things are running normally - * (i.e. with text and data mapped to the address they were linked at). - * It traverses the device tree and fills in some of the additional, - * fields in each node like {n_}addrs and {n_}intrs, the virt interrupt - * mapping is also initialized at this point. - */ -void __init finish_device_tree(void) -{ - unsigned long start, end, size = 0; - - DBG(" -> finish_device_tree\n"); - - if (ppc64_interrupt_controller == IC_INVALID) { - DBG("failed to configure interrupt controller type\n"); - panic("failed to configure interrupt controller type\n"); - } - - /* Initialize virtual IRQ map */ - virt_irq_init(); - - /* - * Finish device-tree (pre-parsing some properties etc...) - * We do this in 2 passes. One with "measure_only" set, which - * will only measure the amount of memory needed, then we can - * allocate that memory, and call finish_node again. However, - * we must be careful as most routines will fail nowadays when - * prom_alloc() returns 0, so we must make sure our first pass - * doesn't start at 0. We pre-initialize size to 16 for that - * reason and then remove those additional 16 bytes - */ - size = 16; - finish_node(allnodes, &size, NULL, 0, 0, 1); - size -= 16; - end = start = (unsigned long)abs_to_virt(lmb_alloc(size, 128)); - finish_node(allnodes, &end, NULL, 0, 0, 0); - BUG_ON(end != start + size); - - DBG(" <- finish_device_tree\n"); -} - -#ifdef DEBUG -#define printk udbg_printf -#endif - -static inline char *find_flat_dt_string(u32 offset) -{ - return ((char *)initial_boot_params) + - initial_boot_params->off_dt_strings + offset; -} - -/** - * This function is used to scan the flattened device-tree, it is - * used to extract the memory informations at boot before we can - * unflatten the tree - */ -int __init of_scan_flat_dt(int (*it)(unsigned long node, - const char *uname, int depth, - void *data), - void *data) -{ - unsigned long p = ((unsigned long)initial_boot_params) + - initial_boot_params->off_dt_struct; - int rc = 0; - int depth = -1; - - do { - u32 tag = *((u32 *)p); - char *pathp; - - p += 4; - if (tag == OF_DT_END_NODE) { - depth --; - continue; - } - if (tag == OF_DT_NOP) - continue; - if (tag == OF_DT_END) - break; - if (tag == OF_DT_PROP) { - u32 sz = *((u32 *)p); - p += 8; - if (initial_boot_params->version < 0x10) - p = _ALIGN(p, sz >= 8 ? 8 : 4); - p += sz; - p = _ALIGN(p, 4); - continue; - } - if (tag != OF_DT_BEGIN_NODE) { - printk(KERN_WARNING "Invalid tag %x scanning flattened" - " device tree !\n", tag); - return -EINVAL; - } - depth++; - pathp = (char *)p; - p = _ALIGN(p + strlen(pathp) + 1, 4); - if ((*pathp) == '/') { - char *lp, *np; - for (lp = NULL, np = pathp; *np; np++) - if ((*np) == '/') - lp = np+1; - if (lp != NULL) - pathp = lp; - } - rc = it(p, pathp, depth, data); - if (rc != 0) - break; - } while(1); - - return rc; -} - -/** - * This function can be used within scan_flattened_dt callback to get - * access to properties - */ -void* __init of_get_flat_dt_prop(unsigned long node, const char *name, - unsigned long *size) -{ - unsigned long p = node; - - do { - u32 tag = *((u32 *)p); - u32 sz, noff; - const char *nstr; - - p += 4; - if (tag == OF_DT_NOP) - continue; - if (tag != OF_DT_PROP) - return NULL; - - sz = *((u32 *)p); - noff = *((u32 *)(p + 4)); - p += 8; - if (initial_boot_params->version < 0x10) - p = _ALIGN(p, sz >= 8 ? 8 : 4); - - nstr = find_flat_dt_string(noff); - if (nstr == NULL) { - printk(KERN_WARNING "Can't find property index" - " name !\n"); - return NULL; - } - if (strcmp(name, nstr) == 0) { - if (size) - *size = sz; - return (void *)p; - } - p += sz; - p = _ALIGN(p, 4); - } while(1); -} - -static void *__init unflatten_dt_alloc(unsigned long *mem, unsigned long size, - unsigned long align) -{ - void *res; - - *mem = _ALIGN(*mem, align); - res = (void *)*mem; - *mem += size; - - return res; -} - -static unsigned long __init unflatten_dt_node(unsigned long mem, - unsigned long *p, - struct device_node *dad, - struct device_node ***allnextpp, - unsigned long fpsize) -{ - struct device_node *np; - struct property *pp, **prev_pp = NULL; - char *pathp; - u32 tag; - unsigned int l, allocl; - int has_name = 0; - int new_format = 0; - - tag = *((u32 *)(*p)); - if (tag != OF_DT_BEGIN_NODE) { - printk("Weird tag at start of node: %x\n", tag); - return mem; - } - *p += 4; - pathp = (char *)*p; - l = allocl = strlen(pathp) + 1; - *p = _ALIGN(*p + l, 4); - - /* version 0x10 has a more compact unit name here instead of the full - * path. we accumulate the full path size using "fpsize", we'll rebuild - * it later. We detect this because the first character of the name is - * not '/'. - */ - if ((*pathp) != '/') { - new_format = 1; - if (fpsize == 0) { - /* root node: special case. fpsize accounts for path - * plus terminating zero. root node only has '/', so - * fpsize should be 2, but we want to avoid the first - * level nodes to have two '/' so we use fpsize 1 here - */ - fpsize = 1; - allocl = 2; - } else { - /* account for '/' and path size minus terminal 0 - * already in 'l' - */ - fpsize += l; - allocl = fpsize; - } - } - - - np = unflatten_dt_alloc(&mem, sizeof(struct device_node) + allocl, - __alignof__(struct device_node)); - if (allnextpp) { - memset(np, 0, sizeof(*np)); - np->full_name = ((char*)np) + sizeof(struct device_node); - if (new_format) { - char *p = np->full_name; - /* rebuild full path for new format */ - if (dad && dad->parent) { - strcpy(p, dad->full_name); -#ifdef DEBUG - if ((strlen(p) + l + 1) != allocl) { - DBG("%s: p: %d, l: %d, a: %d\n", - pathp, strlen(p), l, allocl); - } -#endif - p += strlen(p); - } - *(p++) = '/'; - memcpy(p, pathp, l); - } else - memcpy(np->full_name, pathp, l); - prev_pp = &np->properties; - **allnextpp = np; - *allnextpp = &np->allnext; - if (dad != NULL) { - np->parent = dad; - /* we temporarily use the next field as `last_child'*/ - if (dad->next == 0) - dad->child = np; - else - dad->next->sibling = np; - dad->next = np; - } - kref_init(&np->kref); - } - while(1) { - u32 sz, noff; - char *pname; - - tag = *((u32 *)(*p)); - if (tag == OF_DT_NOP) { - *p += 4; - continue; - } - if (tag != OF_DT_PROP) - break; - *p += 4; - sz = *((u32 *)(*p)); - noff = *((u32 *)((*p) + 4)); - *p += 8; - if (initial_boot_params->version < 0x10) - *p = _ALIGN(*p, sz >= 8 ? 8 : 4); - - pname = find_flat_dt_string(noff); - if (pname == NULL) { - printk("Can't find property name in list !\n"); - break; - } - if (strcmp(pname, "name") == 0) - has_name = 1; - l = strlen(pname) + 1; - pp = unflatten_dt_alloc(&mem, sizeof(struct property), - __alignof__(struct property)); - if (allnextpp) { - if (strcmp(pname, "linux,phandle") == 0) { - np->node = *((u32 *)*p); - if (np->linux_phandle == 0) - np->linux_phandle = np->node; - } - if (strcmp(pname, "ibm,phandle") == 0) - np->linux_phandle = *((u32 *)*p); - pp->name = pname; - pp->length = sz; - pp->value = (void *)*p; - *prev_pp = pp; - prev_pp = &pp->next; - } - *p = _ALIGN((*p) + sz, 4); - } - /* with version 0x10 we may not have the name property, recreate - * it here from the unit name if absent - */ - if (!has_name) { - char *p = pathp, *ps = pathp, *pa = NULL; - int sz; - - while (*p) { - if ((*p) == '@') - pa = p; - if ((*p) == '/') - ps = p + 1; - p++; - } - if (pa < ps) - pa = p; - sz = (pa - ps) + 1; - pp = unflatten_dt_alloc(&mem, sizeof(struct property) + sz, - __alignof__(struct property)); - if (allnextpp) { - pp->name = "name"; - pp->length = sz; - pp->value = (unsigned char *)(pp + 1); - *prev_pp = pp; - prev_pp = &pp->next; - memcpy(pp->value, ps, sz - 1); - ((char *)pp->value)[sz - 1] = 0; - DBG("fixed up name for %s -> %s\n", pathp, pp->value); - } - } - if (allnextpp) { - *prev_pp = NULL; - np->name = get_property(np, "name", NULL); - np->type = get_property(np, "device_type", NULL); - - if (!np->name) - np->name = "<NULL>"; - if (!np->type) - np->type = "<NULL>"; - } - while (tag == OF_DT_BEGIN_NODE) { - mem = unflatten_dt_node(mem, p, np, allnextpp, fpsize); - tag = *((u32 *)(*p)); - } - if (tag != OF_DT_END_NODE) { - printk("Weird tag at end of node: %x\n", tag); - return mem; - } - *p += 4; - return mem; -} - - -/** - * unflattens the device-tree passed by the firmware, creating the - * tree of struct device_node. It also fills the "name" and "type" - * pointers of the nodes so the normal device-tree walking functions - * can be used (this used to be done by finish_device_tree) - */ -void __init unflatten_device_tree(void) -{ - unsigned long start, mem, size; - struct device_node **allnextp = &allnodes; - char *p = NULL; - int l = 0; - - DBG(" -> unflatten_device_tree()\n"); - - /* First pass, scan for size */ - start = ((unsigned long)initial_boot_params) + - initial_boot_params->off_dt_struct; - size = unflatten_dt_node(0, &start, NULL, NULL, 0); - size = (size | 3) + 1; - - DBG(" size is %lx, allocating...\n", size); - - /* Allocate memory for the expanded device tree */ - mem = lmb_alloc(size + 4, __alignof__(struct device_node)); - if (!mem) { - DBG("Couldn't allocate memory with lmb_alloc()!\n"); - panic("Couldn't allocate memory with lmb_alloc()!\n"); - } - mem = (unsigned long)abs_to_virt(mem); - - ((u32 *)mem)[size / 4] = 0xdeadbeef; - - DBG(" unflattening...\n", mem); - - /* Second pass, do actual unflattening */ - start = ((unsigned long)initial_boot_params) + - initial_boot_params->off_dt_struct; - unflatten_dt_node(mem, &start, NULL, &allnextp, 0); - if (*((u32 *)start) != OF_DT_END) - printk(KERN_WARNING "Weird tag at end of tree: %08x\n", *((u32 *)start)); - if (((u32 *)mem)[size / 4] != 0xdeadbeef) - printk(KERN_WARNING "End of tree marker overwritten: %08x\n", - ((u32 *)mem)[size / 4] ); - *allnextp = NULL; - - /* Get pointer to OF "/chosen" node for use everywhere */ - of_chosen = of_find_node_by_path("/chosen"); - - /* Retreive command line */ - if (of_chosen != NULL) { - p = (char *)get_property(of_chosen, "bootargs", &l); - if (p != NULL && l > 0) - strlcpy(cmd_line, p, min(l, COMMAND_LINE_SIZE)); - } -#ifdef CONFIG_CMDLINE - if (l == 0 || (l == 1 && (*p) == 0)) - strlcpy(cmd_line, CONFIG_CMDLINE, COMMAND_LINE_SIZE); -#endif /* CONFIG_CMDLINE */ - - DBG("Command line is: %s\n", cmd_line); - - DBG(" <- unflatten_device_tree()\n"); -} - - -static int __init early_init_dt_scan_cpus(unsigned long node, - const char *uname, int depth, void *data) -{ - char *type = of_get_flat_dt_prop(node, "device_type", NULL); - u32 *prop; - unsigned long size; - - /* We are scanning "cpu" nodes only */ - if (type == NULL || strcmp(type, "cpu") != 0) - return 0; - - if (initial_boot_params && initial_boot_params->version >= 2) { - /* version 2 of the kexec param format adds the phys cpuid - * of booted proc. - */ - boot_cpuid_phys = initial_boot_params->boot_cpuid_phys; - boot_cpuid = 0; - } else { - /* Check if it's the boot-cpu, set it's hw index in paca now */ - if (of_get_flat_dt_prop(node, "linux,boot-cpu", NULL) - != NULL) { - u32 *prop = of_get_flat_dt_prop(node, "reg", NULL); - set_hard_smp_processor_id(0, prop == NULL ? 0 : *prop); - boot_cpuid_phys = get_hard_smp_processor_id(0); - } - } - -#ifdef CONFIG_ALTIVEC - /* Check if we have a VMX and eventually update CPU features */ - prop = (u32 *)of_get_flat_dt_prop(node, "ibm,vmx", NULL); - if (prop && (*prop) > 0) { - cur_cpu_spec->cpu_features |= CPU_FTR_ALTIVEC; - cur_cpu_spec->cpu_user_features |= PPC_FEATURE_HAS_ALTIVEC; - } - - /* Same goes for Apple's "altivec" property */ - prop = (u32 *)of_get_flat_dt_prop(node, "altivec", NULL); - if (prop) { - cur_cpu_spec->cpu_features |= CPU_FTR_ALTIVEC; - cur_cpu_spec->cpu_user_features |= PPC_FEATURE_HAS_ALTIVEC; - } -#endif /* CONFIG_ALTIVEC */ - - /* - * Check for an SMT capable CPU and set the CPU feature. We do - * this by looking at the size of the ibm,ppc-interrupt-server#s - * property - */ - prop = (u32 *)of_get_flat_dt_prop(node, "ibm,ppc-interrupt-server#s", - &size); - cur_cpu_spec->cpu_features &= ~CPU_FTR_SMT; - if (prop && ((size / sizeof(u32)) > 1)) - cur_cpu_spec->cpu_features |= CPU_FTR_SMT; - - return 0; -} - -static int __init early_init_dt_scan_chosen(unsigned long node, - const char *uname, int depth, void *data) -{ - u32 *prop; - u64 *prop64; - - DBG("search \"chosen\", depth: %d, uname: %s\n", depth, uname); - - if (depth != 1 || strcmp(uname, "chosen") != 0) - return 0; - - /* get platform type */ - prop = (u32 *)of_get_flat_dt_prop(node, "linux,platform", NULL); - if (prop == NULL) - return 0; - systemcfg->platform = *prop; - - /* check if iommu is forced on or off */ - if (of_get_flat_dt_prop(node, "linux,iommu-off", NULL) != NULL) - iommu_is_off = 1; - if (of_get_flat_dt_prop(node, "linux,iommu-force-on", NULL) != NULL) - iommu_force_on = 1; - - prop64 = (u64*)of_get_flat_dt_prop(node, "linux,memory-limit", NULL); - if (prop64) - memory_limit = *prop64; - - prop64 = (u64*)of_get_flat_dt_prop(node, "linux,tce-alloc-start",NULL); - if (prop64) - tce_alloc_start = *prop64; - - prop64 = (u64*)of_get_flat_dt_prop(node, "linux,tce-alloc-end", NULL); - if (prop64) - tce_alloc_end = *prop64; - -#ifdef CONFIG_PPC_RTAS - /* To help early debugging via the front panel, we retreive a minimal - * set of RTAS infos now if available - */ - { - u64 *basep, *entryp; - - basep = (u64*)of_get_flat_dt_prop(node, - "linux,rtas-base", NULL); - entryp = (u64*)of_get_flat_dt_prop(node, - "linux,rtas-entry", NULL); - prop = (u32*)of_get_flat_dt_prop(node, - "linux,rtas-size", NULL); - if (basep && entryp && prop) { - rtas.base = *basep; - rtas.entry = *entryp; - rtas.size = *prop; - } - } -#endif /* CONFIG_PPC_RTAS */ - - /* break now */ - return 1; -} - -static int __init early_init_dt_scan_root(unsigned long node, - const char *uname, int depth, void *data) -{ - u32 *prop; - - if (depth != 0) - return 0; - - prop = (u32 *)of_get_flat_dt_prop(node, "#size-cells", NULL); - dt_root_size_cells = (prop == NULL) ? 1 : *prop; - DBG("dt_root_size_cells = %x\n", dt_root_size_cells); - - prop = (u32 *)of_get_flat_dt_prop(node, "#address-cells", NULL); - dt_root_addr_cells = (prop == NULL) ? 2 : *prop; - DBG("dt_root_addr_cells = %x\n", dt_root_addr_cells); - - /* break now */ - return 1; -} - -static unsigned long __init dt_mem_next_cell(int s, cell_t **cellp) -{ - cell_t *p = *cellp; - unsigned long r = 0; - - /* Ignore more than 2 cells */ - while (s > 2) { - p++; - s--; - } - while (s) { - r <<= 32; - r |= *(p++); - s--; - } - - *cellp = p; - return r; -} - - -static int __init early_init_dt_scan_memory(unsigned long node, - const char *uname, int depth, void *data) -{ - char *type = of_get_flat_dt_prop(node, "device_type", NULL); - cell_t *reg, *endp; - unsigned long l; - - /* We are scanning "memory" nodes only */ - if (type == NULL || strcmp(type, "memory") != 0) - return 0; - - reg = (cell_t *)of_get_flat_dt_prop(node, "reg", &l); - if (reg == NULL) - return 0; - - endp = reg + (l / sizeof(cell_t)); - - DBG("memory scan node %s ..., reg size %ld, data: %x %x %x %x, ...\n", - uname, l, reg[0], reg[1], reg[2], reg[3]); - - while ((endp - reg) >= (dt_root_addr_cells + dt_root_size_cells)) { - unsigned long base, size; - - base = dt_mem_next_cell(dt_root_addr_cells, ®); - size = dt_mem_next_cell(dt_root_size_cells, ®); - - if (size == 0) - continue; - DBG(" - %lx , %lx\n", base, size); - if (iommu_is_off) { - if (base >= 0x80000000ul) - continue; - if ((base + size) > 0x80000000ul) - size = 0x80000000ul - base; - } - lmb_add(base, size); - } - return 0; -} - -static void __init early_reserve_mem(void) -{ - u64 base, size; - u64 *reserve_map = (u64 *)(((unsigned long)initial_boot_params) + - initial_boot_params->off_mem_rsvmap); - while (1) { - base = *(reserve_map++); - size = *(reserve_map++); - if (size == 0) - break; - DBG("reserving: %lx -> %lx\n", base, size); - lmb_reserve(base, size); - } - -#if 0 - DBG("memory reserved, lmbs :\n"); - lmb_dump_all(); -#endif -} - -void __init early_init_devtree(void *params) -{ - DBG(" -> early_init_devtree()\n"); - - /* Setup flat device-tree pointer */ - initial_boot_params = params; - - /* Retreive various informations from the /chosen node of the - * device-tree, including the platform type, initrd location and - * size, TCE reserve, and more ... - */ - of_scan_flat_dt(early_init_dt_scan_chosen, NULL); - - /* Scan memory nodes and rebuild LMBs */ - lmb_init(); - of_scan_flat_dt(early_init_dt_scan_root, NULL); - of_scan_flat_dt(early_init_dt_scan_memory, NULL); - lmb_enforce_memory_limit(memory_limit); - lmb_analyze(); - systemcfg->physicalMemorySize = lmb_phys_mem_size(); - lmb_reserve(0, __pa(klimit)); - - DBG("Phys. mem: %lx\n", systemcfg->physicalMemorySize); - - /* Reserve LMB regions used by kernel, initrd, dt, etc... */ - early_reserve_mem(); - - DBG("Scanning CPUs ...\n"); - - /* Retreive hash table size from flattened tree plus other - * CPU related informations (altivec support, boot CPU ID, ...) - */ - of_scan_flat_dt(early_init_dt_scan_cpus, NULL); - - DBG(" <- early_init_devtree()\n"); -} - -#undef printk - -int -prom_n_addr_cells(struct device_node* np) -{ - int* ip; - do { - if (np->parent) - np = np->parent; - ip = (int *) get_property(np, "#address-cells", NULL); - if (ip != NULL) - return *ip; - } while (np->parent); - /* No #address-cells property for the root node, default to 1 */ - return 1; -} - -int -prom_n_size_cells(struct device_node* np) -{ - int* ip; - do { - if (np->parent) - np = np->parent; - ip = (int *) get_property(np, "#size-cells", NULL); - if (ip != NULL) - return *ip; - } while (np->parent); - /* No #size-cells property for the root node, default to 1 */ - return 1; -} - -/** - * Work out the sense (active-low level / active-high edge) - * of each interrupt from the device tree. - */ -void __init prom_get_irq_senses(unsigned char *senses, int off, int max) -{ - struct device_node *np; - int i, j; - - /* default to level-triggered */ - memset(senses, 1, max - off); - - for (np = allnodes; np != 0; np = np->allnext) { - for (j = 0; j < np->n_intrs; j++) { - i = np->intrs[j].line; - if (i >= off && i < max) - senses[i-off] = np->intrs[j].sense ? - IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE : - IRQ_SENSE_EDGE | IRQ_POLARITY_POSITIVE; - } - } -} - -/** - * Construct and return a list of the device_nodes with a given name. - */ -struct device_node * -find_devices(const char *name) -{ - struct device_node *head, **prevp, *np; - - prevp = &head; - for (np = allnodes; np != 0; np = np->allnext) { - if (np->name != 0 && strcasecmp(np->name, name) == 0) { - *prevp = np; - prevp = &np->next; - } - } - *prevp = NULL; - return head; -} -EXPORT_SYMBOL(find_devices); - -/** - * Construct and return a list of the device_nodes with a given type. - */ -struct device_node * -find_type_devices(const char *type) -{ - struct device_node *head, **prevp, *np; - - prevp = &head; - for (np = allnodes; np != 0; np = np->allnext) { - if (np->type != 0 && strcasecmp(np->type, type) == 0) { - *prevp = np; - prevp = &np->next; - } - } - *prevp = NULL; - return head; -} -EXPORT_SYMBOL(find_type_devices); - -/** - * Returns all nodes linked together - */ -struct device_node * -find_all_nodes(void) -{ - struct device_node *head, **prevp, *np; - - prevp = &head; - for (np = allnodes; np != 0; np = np->allnext) { - *prevp = np; - prevp = &np->next; - } - *prevp = NULL; - return head; -} -EXPORT_SYMBOL(find_all_nodes); - -/** Checks if the given "compat" string matches one of the strings in - * the device's "compatible" property - */ -int -device_is_compatible(struct device_node *device, const char *compat) -{ - const char* cp; - int cplen, l; - - cp = (char *) get_property(device, "compatible", &cplen); - if (cp == NULL) - return 0; - while (cplen > 0) { - if (strncasecmp(cp, compat, strlen(compat)) == 0) - return 1; - l = strlen(cp) + 1; - cp += l; - cplen -= l; - } - - return 0; -} -EXPORT_SYMBOL(device_is_compatible); - - -/** - * Indicates whether the root node has a given value in its - * compatible property. - */ -int -machine_is_compatible(const char *compat) -{ - struct device_node *root; - int rc = 0; - - root = of_find_node_by_path("/"); - if (root) { - rc = device_is_compatible(root, compat); - of_node_put(root); - } - return rc; -} -EXPORT_SYMBOL(machine_is_compatible); - -/** - * Construct and return a list of the device_nodes with a given type - * and compatible property. - */ -struct device_node * -find_compatible_devices(const char *type, const char *compat) -{ - struct device_node *head, **prevp, *np; - - prevp = &head; - for (np = allnodes; np != 0; np = np->allnext) { - if (type != NULL - && !(np->type != 0 && strcasecmp(np->type, type) == 0)) - continue; - if (device_is_compatible(np, compat)) { - *prevp = np; - prevp = &np->next; - } - } - *prevp = NULL; - return head; -} -EXPORT_SYMBOL(find_compatible_devices); - -/** - * Find the device_node with a given full_name. - */ -struct device_node * -find_path_device(const char *path) -{ - struct device_node *np; - - for (np = allnodes; np != 0; np = np->allnext) - if (np->full_name != 0 && strcasecmp(np->full_name, path) == 0) - return np; - return NULL; -} -EXPORT_SYMBOL(find_path_device); - -/******* - * - * New implementation of the OF "find" APIs, return a refcounted - * object, call of_node_put() when done. The device tree and list - * are protected by a rw_lock. - * - * Note that property management will need some locking as well, - * this isn't dealt with yet. - * - *******/ - -/** - * of_find_node_by_name - Find a node by its "name" property - * @from: The node to start searching from or NULL, the node - * you pass will not be searched, only the next one - * will; typically, you pass what the previous call - * returned. of_node_put() will be called on it - * @name: The name string to match against - * - * Returns a node pointer with refcount incremented, use - * of_node_put() on it when done. - */ -struct device_node *of_find_node_by_name(struct device_node *from, - const char *name) -{ - struct device_node *np; - - read_lock(&devtree_lock); - np = from ? from->allnext : allnodes; - for (; np != 0; np = np->allnext) - if (np->name != 0 && strcasecmp(np->name, name) == 0 - && of_node_get(np)) - break; - if (from) - of_node_put(from); - read_unlock(&devtree_lock); - return np; -} -EXPORT_SYMBOL(of_find_node_by_name); - -/** - * of_find_node_by_type - Find a node by its "device_type" property - * @from: The node to start searching from or NULL, the node - * you pass will not be searched, only the next one - * will; typically, you pass what the previous call - * returned. of_node_put() will be called on it - * @name: The type string to match against - * - * Returns a node pointer with refcount incremented, use - * of_node_put() on it when done. - */ -struct device_node *of_find_node_by_type(struct device_node *from, - const char *type) -{ - struct device_node *np; - - read_lock(&devtree_lock); - np = from ? from->allnext : allnodes; - for (; np != 0; np = np->allnext) - if (np->type != 0 && strcasecmp(np->type, type) == 0 - && of_node_get(np)) - break; - if (from) - of_node_put(from); - read_unlock(&devtree_lock); - return np; -} -EXPORT_SYMBOL(of_find_node_by_type); - -/** - * of_find_compatible_node - Find a node based on type and one of the - * tokens in its "compatible" property - * @from: The node to start searching from or NULL, the node - * you pass will not be searched, only the next one - * will; typically, you pass what the previous call - * returned. of_node_put() will be called on it - * @type: The type string to match "device_type" or NULL to ignore - * @compatible: The string to match to one of the tokens in the device - * "compatible" list. - * - * Returns a node pointer with refcount incremented, use - * of_node_put() on it when done. - */ -struct device_node *of_find_compatible_node(struct device_node *from, - const char *type, const char *compatible) -{ - struct device_node *np; - - read_lock(&devtree_lock); - np = from ? from->allnext : allnodes; - for (; np != 0; np = np->allnext) { - if (type != NULL - && !(np->type != 0 && strcasecmp(np->type, type) == 0)) - continue; - if (device_is_compatible(np, compatible) && of_node_get(np)) - break; - } - if (from) - of_node_put(from); - read_unlock(&devtree_lock); - return np; -} -EXPORT_SYMBOL(of_find_compatible_node); - -/** - * of_find_node_by_path - Find a node matching a full OF path - * @path: The full path to match - * - * Returns a node pointer with refcount incremented, use - * of_node_put() on it when done. - */ -struct device_node *of_find_node_by_path(const char *path) -{ - struct device_node *np = allnodes; - - read_lock(&devtree_lock); - for (; np != 0; np = np->allnext) { - if (np->full_name != 0 && strcasecmp(np->full_name, path) == 0 - && of_node_get(np)) - break; - } - read_unlock(&devtree_lock); - return np; -} -EXPORT_SYMBOL(of_find_node_by_path); - -/** - * of_find_node_by_phandle - Find a node given a phandle - * @handle: phandle of the node to find - * - * Returns a node pointer with refcount incremented, use - * of_node_put() on it when done. - */ -struct device_node *of_find_node_by_phandle(phandle handle) -{ - struct device_node *np; - - read_lock(&devtree_lock); - for (np = allnodes; np != 0; np = np->allnext) - if (np->linux_phandle == handle) - break; - if (np) - of_node_get(np); - read_unlock(&devtree_lock); - return np; -} -EXPORT_SYMBOL(of_find_node_by_phandle); - -/** - * of_find_all_nodes - Get next node in global list - * @prev: Previous node or NULL to start iteration - * of_node_put() will be called on it - * - * Returns a node pointer with refcount incremented, use - * of_node_put() on it when done. - */ -struct device_node *of_find_all_nodes(struct device_node *prev) -{ - struct device_node *np; - - read_lock(&devtree_lock); - np = prev ? prev->allnext : allnodes; - for (; np != 0; np = np->allnext) - if (of_node_get(np)) - break; - if (prev) - of_node_put(prev); - read_unlock(&devtree_lock); - return np; -} -EXPORT_SYMBOL(of_find_all_nodes); - -/** - * of_get_parent - Get a node's parent if any - * @node: Node to get parent - * - * Returns a node pointer with refcount incremented, use - * of_node_put() on it when done. - */ -struct device_node *of_get_parent(const struct device_node *node) -{ - struct device_node *np; - - if (!node) - return NULL; - - read_lock(&devtree_lock); - np = of_node_get(node->parent); - read_unlock(&devtree_lock); - return np; -} -EXPORT_SYMBOL(of_get_parent); - -/** - * of_get_next_child - Iterate a node childs - * @node: parent node - * @prev: previous child of the parent node, or NULL to get first - * - * Returns a node pointer with refcount incremented, use - * of_node_put() on it when done. - */ -struct device_node *of_get_next_child(const struct device_node *node, - struct device_node *prev) -{ - struct device_node *next; - - read_lock(&devtree_lock); - next = prev ? prev->sibling : node->child; - for (; next != 0; next = next->sibling) - if (of_node_get(next)) - break; - if (prev) - of_node_put(prev); - read_unlock(&devtree_lock); - return next; -} -EXPORT_SYMBOL(of_get_next_child); - -/** - * of_node_get - Increment refcount of a node - * @node: Node to inc refcount, NULL is supported to - * simplify writing of callers - * - * Returns node. - */ -struct device_node *of_node_get(struct device_node *node) -{ - if (node) - kref_get(&node->kref); - return node; -} -EXPORT_SYMBOL(of_node_get); - -static inline struct device_node * kref_to_device_node(struct kref *kref) -{ - return container_of(kref, struct device_node, kref); -} - -/** - * of_node_release - release a dynamically allocated node - * @kref: kref element of the node to be released - * - * In of_node_put() this function is passed to kref_put() - * as the destructor. - */ -static void of_node_release(struct kref *kref) -{ - struct device_node *node = kref_to_device_node(kref); - struct property *prop = node->properties; - - if (!OF_IS_DYNAMIC(node)) - return; - while (prop) { - struct property *next = prop->next; - kfree(prop->name); - kfree(prop->value); - kfree(prop); - prop = next; - } - kfree(node->intrs); - kfree(node->addrs); - kfree(node->full_name); - kfree(node->data); - kfree(node); -} - -/** - * of_node_put - Decrement refcount of a node - * @node: Node to dec refcount, NULL is supported to - * simplify writing of callers - * - */ -void of_node_put(struct device_node *node) -{ - if (node) - kref_put(&node->kref, of_node_release); -} -EXPORT_SYMBOL(of_node_put); - -/* - * Fix up the uninitialized fields in a new device node: - * name, type, n_addrs, addrs, n_intrs, intrs, and pci-specific fields - * - * A lot of boot-time code is duplicated here, because functions such - * as finish_node_interrupts, interpret_pci_props, etc. cannot use the - * slab allocator. - * - * This should probably be split up into smaller chunks. - */ - -static int of_finish_dynamic_node(struct device_node *node, - unsigned long *unused1, int unused2, - int unused3, int unused4) -{ - struct device_node *parent = of_get_parent(node); - int err = 0; - phandle *ibm_phandle; - - node->name = get_property(node, "name", NULL); - node->type = get_property(node, "device_type", NULL); - - if (!parent) { - err = -ENODEV; - goto out; - } - - /* We don't support that function on PowerMac, at least - * not yet - */ - if (systemcfg->platform == PLATFORM_POWERMAC) - return -ENODEV; - - /* fix up new node's linux_phandle field */ - if ((ibm_phandle = (unsigned int *)get_property(node, "ibm,phandle", NULL))) - node->linux_phandle = *ibm_phandle; - -out: - of_node_put(parent); - return err; -} - -/* - * Plug a device node into the tree and global list. - */ -void of_attach_node(struct device_node *np) -{ - write_lock(&devtree_lock); - np->sibling = np->parent->child; - np->allnext = allnodes; - np->parent->child = np; - allnodes = np; - write_unlock(&devtree_lock); -} - -/* - * "Unplug" a node from the device tree. The caller must hold - * a reference to the node. The memory associated with the node - * is not freed until its refcount goes to zero. - */ -void of_detach_node(const struct device_node *np) -{ - struct device_node *parent; - - write_lock(&devtree_lock); - - parent = np->parent; - - if (allnodes == np) - allnodes = np->allnext; - else { - struct device_node *prev; - for (prev = allnodes; - prev->allnext != np; - prev = prev->allnext) - ; - prev->allnext = np->allnext; - } - - if (parent->child == np) - parent->child = np->sibling; - else { - struct device_node *prevsib; - for (prevsib = np->parent->child; - prevsib->sibling != np; - prevsib = prevsib->sibling) - ; - prevsib->sibling = np->sibling; - } - - write_unlock(&devtree_lock); -} - -static int prom_reconfig_notifier(struct notifier_block *nb, unsigned long action, void *node) -{ - int err; - - switch (action) { - case PSERIES_RECONFIG_ADD: - err = finish_node(node, NULL, of_finish_dynamic_node, 0, 0, 0); - if (err < 0) { - printk(KERN_ERR "finish_node returned %d\n", err); - err = NOTIFY_BAD; - } - break; - default: - err = NOTIFY_DONE; - break; - } - return err; -} - -static struct notifier_block prom_reconfig_nb = { - .notifier_call = prom_reconfig_notifier, - .priority = 10, /* This one needs to run first */ -}; - -static int __init prom_reconfig_setup(void) -{ - return pSeries_reconfig_notifier_register(&prom_reconfig_nb); -} -__initcall(prom_reconfig_setup); - -/* - * Find a property with a given name for a given node - * and return the value. - */ -unsigned char * -get_property(struct device_node *np, const char *name, int *lenp) -{ - struct property *pp; - - for (pp = np->properties; pp != 0; pp = pp->next) - if (strcmp(pp->name, name) == 0) { - if (lenp != 0) - *lenp = pp->length; - return pp->value; - } - return NULL; -} -EXPORT_SYMBOL(get_property); - -/* - * Add a property to a node - */ -void -prom_add_property(struct device_node* np, struct property* prop) -{ - struct property **next = &np->properties; - - prop->next = NULL; - while (*next) - next = &(*next)->next; - *next = prop; -} - -#if 0 -void -print_properties(struct device_node *np) -{ - struct property *pp; - char *cp; - int i, n; - - for (pp = np->properties; pp != 0; pp = pp->next) { - printk(KERN_INFO "%s", pp->name); - for (i = strlen(pp->name); i < 16; ++i) - printk(" "); - cp = (char *) pp->value; - for (i = pp->length; i > 0; --i, ++cp) - if ((i > 1 && (*cp < 0x20 || *cp > 0x7e)) - || (i == 1 && *cp != 0)) - break; - if (i == 0 && pp->length > 1) { - /* looks like a string */ - printk(" %s\n", (char *) pp->value); - } else { - /* dump it in hex */ - n = pp->length; - if (n > 64) - n = 64; - if (pp->length % 4 == 0) { - unsigned int *p = (unsigned int *) pp->value; - - n /= 4; - for (i = 0; i < n; ++i) { - if (i != 0 && (i % 4) == 0) - printk("\n "); - printk(" %08x", *p++); - } - } else { - unsigned char *bp = pp->value; - - for (i = 0; i < n; ++i) { - if (i != 0 && (i % 16) == 0) - printk("\n "); - printk(" %02x", *bp++); - } - } - printk("\n"); - if (pp->length > 64) - printk(" ... (length = %d)\n", - pp->length); - } - } -} -#endif - - - - - - - - - - diff --git a/arch/ppc64/kernel/prom_init.c b/arch/ppc64/kernel/prom_init.c deleted file mode 100644 index a4bbca6dbb8b..000000000000 --- a/arch/ppc64/kernel/prom_init.c +++ /dev/null @@ -1,2051 +0,0 @@ -/* - * - * - * Procedures for interfacing to Open Firmware. - * - * Paul Mackerras August 1996. - * Copyright (C) 1996 Paul Mackerras. - * - * Adapted for 64bit PowerPC by Dave Engebretsen and Peter Bergner. - * {engebret|bergner}@us.ibm.com - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#undef DEBUG_PROM - -#include <stdarg.h> -#include <linux/config.h> -#include <linux/kernel.h> -#include <linux/string.h> -#include <linux/init.h> -#include <linux/threads.h> -#include <linux/spinlock.h> -#include <linux/types.h> -#include <linux/pci.h> -#include <linux/proc_fs.h> -#include <linux/stringify.h> -#include <linux/delay.h> -#include <linux/initrd.h> -#include <linux/bitops.h> -#include <asm/prom.h> -#include <asm/rtas.h> -#include <asm/abs_addr.h> -#include <asm/page.h> -#include <asm/processor.h> -#include <asm/irq.h> -#include <asm/io.h> -#include <asm/smp.h> -#include <asm/system.h> -#include <asm/mmu.h> -#include <asm/pgtable.h> -#include <asm/pci.h> -#include <asm/iommu.h> -#include <asm/ppcdebug.h> -#include <asm/btext.h> -#include <asm/sections.h> -#include <asm/machdep.h> - -#ifdef CONFIG_LOGO_LINUX_CLUT224 -#include <linux/linux_logo.h> -extern const struct linux_logo logo_linux_clut224; -#endif - -/* - * Properties whose value is longer than this get excluded from our - * copy of the device tree. This value does need to be big enough to - * ensure that we don't lose things like the interrupt-map property - * on a PCI-PCI bridge. - */ -#define MAX_PROPERTY_LENGTH (1UL * 1024 * 1024) - -/* - * Eventually bump that one up - */ -#define DEVTREE_CHUNK_SIZE 0x100000 - -/* - * This is the size of the local memory reserve map that gets copied - * into the boot params passed to the kernel. That size is totally - * flexible as the kernel just reads the list until it encounters an - * entry with size 0, so it can be changed without breaking binary - * compatibility - */ -#define MEM_RESERVE_MAP_SIZE 8 - -/* - * prom_init() is called very early on, before the kernel text - * and data have been mapped to KERNELBASE. At this point the code - * is running at whatever address it has been loaded at, so - * references to extern and static variables must be relocated - * explicitly. The procedure reloc_offset() returns the address - * we're currently running at minus the address we were linked at. - * (Note that strings count as static variables.) - * - * Because OF may have mapped I/O devices into the area starting at - * KERNELBASE, particularly on CHRP machines, we can't safely call - * OF once the kernel has been mapped to KERNELBASE. Therefore all - * OF calls should be done within prom_init(), and prom_init() - * and all routines called within it must be careful to relocate - * references as necessary. - * - * Note that the bss is cleared *after* prom_init runs, so we have - * to make sure that any static or extern variables it accesses - * are put in the data segment. - */ - - -#define PROM_BUG() do { \ - prom_printf("kernel BUG at %s line 0x%x!\n", \ - RELOC(__FILE__), __LINE__); \ - __asm__ __volatile__(".long " BUG_ILLEGAL_INSTR); \ -} while (0) - -#ifdef DEBUG_PROM -#define prom_debug(x...) prom_printf(x) -#else -#define prom_debug(x...) -#endif - - -typedef u32 prom_arg_t; - -struct prom_args { - u32 service; - u32 nargs; - u32 nret; - prom_arg_t args[10]; - prom_arg_t *rets; /* Pointer to return values in args[16]. */ -}; - -struct prom_t { - unsigned long entry; - ihandle root; - ihandle chosen; - int cpu; - ihandle stdout; - ihandle disp_node; - struct prom_args args; - unsigned long version; - unsigned long root_size_cells; - unsigned long root_addr_cells; -}; - -struct pci_reg_property { - struct pci_address addr; - u32 size_hi; - u32 size_lo; -}; - -struct mem_map_entry { - u64 base; - u64 size; -}; - -typedef u32 cell_t; - -extern void __start(unsigned long r3, unsigned long r4, unsigned long r5); - -extern void enter_prom(struct prom_args *args, unsigned long entry); -extern void copy_and_flush(unsigned long dest, unsigned long src, - unsigned long size, unsigned long offset); - -extern unsigned long klimit; - -/* prom structure */ -static struct prom_t __initdata prom; - -#define PROM_SCRATCH_SIZE 256 - -static char __initdata of_stdout_device[256]; -static char __initdata prom_scratch[PROM_SCRATCH_SIZE]; - -static unsigned long __initdata dt_header_start; -static unsigned long __initdata dt_struct_start, dt_struct_end; -static unsigned long __initdata dt_string_start, dt_string_end; - -static unsigned long __initdata prom_initrd_start, prom_initrd_end; - -static int __initdata iommu_force_on; -static int __initdata ppc64_iommu_off; -static int __initdata of_platform; - -static char __initdata prom_cmd_line[COMMAND_LINE_SIZE]; - -static unsigned long __initdata prom_memory_limit; -static unsigned long __initdata prom_tce_alloc_start; -static unsigned long __initdata prom_tce_alloc_end; - -static unsigned long __initdata alloc_top; -static unsigned long __initdata alloc_top_high; -static unsigned long __initdata alloc_bottom; -static unsigned long __initdata rmo_top; -static unsigned long __initdata ram_top; - -static struct mem_map_entry __initdata mem_reserve_map[MEM_RESERVE_MAP_SIZE]; -static int __initdata mem_reserve_cnt; - -static cell_t __initdata regbuf[1024]; - - -#define MAX_CPU_THREADS 2 - -/* TO GO */ -#ifdef CONFIG_HMT -struct { - unsigned int pir; - unsigned int threadid; -} hmt_thread_data[NR_CPUS]; -#endif /* CONFIG_HMT */ - -/* - * This are used in calls to call_prom. The 4th and following - * arguments to call_prom should be 32-bit values. 64 bit values - * are truncated to 32 bits (and fortunately don't get interpreted - * as two arguments). - */ -#define ADDR(x) (u32) ((unsigned long)(x) - offset) - -/* - * Error results ... some OF calls will return "-1" on error, some - * will return 0, some will return either. To simplify, here are - * macros to use with any ihandle or phandle return value to check if - * it is valid - */ - -#define PROM_ERROR (-1u) -#define PHANDLE_VALID(p) ((p) != 0 && (p) != PROM_ERROR) -#define IHANDLE_VALID(i) ((i) != 0 && (i) != PROM_ERROR) - - -/* This is the one and *ONLY* place where we actually call open - * firmware from, since we need to make sure we're running in 32b - * mode when we do. We switch back to 64b mode upon return. - */ - -static int __init call_prom(const char *service, int nargs, int nret, ...) -{ - int i; - unsigned long offset = reloc_offset(); - struct prom_t *_prom = PTRRELOC(&prom); - va_list list; - - _prom->args.service = ADDR(service); - _prom->args.nargs = nargs; - _prom->args.nret = nret; - _prom->args.rets = (prom_arg_t *)&(_prom->args.args[nargs]); - - va_start(list, nret); - for (i=0; i < nargs; i++) - _prom->args.args[i] = va_arg(list, prom_arg_t); - va_end(list); - - for (i=0; i < nret ;i++) - _prom->args.rets[i] = 0; - - enter_prom(&_prom->args, _prom->entry); - - return (nret > 0) ? _prom->args.rets[0] : 0; -} - - -static unsigned int __init prom_claim(unsigned long virt, unsigned long size, - unsigned long align) -{ - return (unsigned int)call_prom("claim", 3, 1, - (prom_arg_t)virt, (prom_arg_t)size, - (prom_arg_t)align); -} - -static void __init prom_print(const char *msg) -{ - const char *p, *q; - unsigned long offset = reloc_offset(); - struct prom_t *_prom = PTRRELOC(&prom); - - if (_prom->stdout == 0) - return; - - for (p = msg; *p != 0; p = q) { - for (q = p; *q != 0 && *q != '\n'; ++q) - ; - if (q > p) - call_prom("write", 3, 1, _prom->stdout, p, q - p); - if (*q == 0) - break; - ++q; - call_prom("write", 3, 1, _prom->stdout, ADDR("\r\n"), 2); - } -} - - -static void __init prom_print_hex(unsigned long val) -{ - unsigned long offset = reloc_offset(); - int i, nibbles = sizeof(val)*2; - char buf[sizeof(val)*2+1]; - struct prom_t *_prom = PTRRELOC(&prom); - - for (i = nibbles-1; i >= 0; i--) { - buf[i] = (val & 0xf) + '0'; - if (buf[i] > '9') - buf[i] += ('a'-'0'-10); - val >>= 4; - } - buf[nibbles] = '\0'; - call_prom("write", 3, 1, _prom->stdout, buf, nibbles); -} - - -static void __init prom_printf(const char *format, ...) -{ - unsigned long offset = reloc_offset(); - const char *p, *q, *s; - va_list args; - unsigned long v; - struct prom_t *_prom = PTRRELOC(&prom); - - va_start(args, format); - for (p = PTRRELOC(format); *p != 0; p = q) { - for (q = p; *q != 0 && *q != '\n' && *q != '%'; ++q) - ; - if (q > p) - call_prom("write", 3, 1, _prom->stdout, p, q - p); - if (*q == 0) - break; - if (*q == '\n') { - ++q; - call_prom("write", 3, 1, _prom->stdout, - ADDR("\r\n"), 2); - continue; - } - ++q; - if (*q == 0) - break; - switch (*q) { - case 's': - ++q; - s = va_arg(args, const char *); - prom_print(s); - break; - case 'x': - ++q; - v = va_arg(args, unsigned long); - prom_print_hex(v); - break; - } - } -} - - -static void __init __attribute__((noreturn)) prom_panic(const char *reason) -{ - unsigned long offset = reloc_offset(); - - prom_print(PTRRELOC(reason)); - /* ToDo: should put up an SRC here */ - call_prom("exit", 0, 0); - - for (;;) /* should never get here */ - ; -} - - -static int __init prom_next_node(phandle *nodep) -{ - phandle node; - - if ((node = *nodep) != 0 - && (*nodep = call_prom("child", 1, 1, node)) != 0) - return 1; - if ((*nodep = call_prom("peer", 1, 1, node)) != 0) - return 1; - for (;;) { - if ((node = call_prom("parent", 1, 1, node)) == 0) - return 0; - if ((*nodep = call_prom("peer", 1, 1, node)) != 0) - return 1; - } -} - -static int __init prom_getprop(phandle node, const char *pname, - void *value, size_t valuelen) -{ - unsigned long offset = reloc_offset(); - - return call_prom("getprop", 4, 1, node, ADDR(pname), - (u32)(unsigned long) value, (u32) valuelen); -} - -static int __init prom_getproplen(phandle node, const char *pname) -{ - unsigned long offset = reloc_offset(); - - return call_prom("getproplen", 2, 1, node, ADDR(pname)); -} - -static int __init prom_setprop(phandle node, const char *pname, - void *value, size_t valuelen) -{ - unsigned long offset = reloc_offset(); - - return call_prom("setprop", 4, 1, node, ADDR(pname), - (u32)(unsigned long) value, (u32) valuelen); -} - -/* We can't use the standard versions because of RELOC headaches. */ -#define isxdigit(c) (('0' <= (c) && (c) <= '9') \ - || ('a' <= (c) && (c) <= 'f') \ - || ('A' <= (c) && (c) <= 'F')) - -#define isdigit(c) ('0' <= (c) && (c) <= '9') -#define islower(c) ('a' <= (c) && (c) <= 'z') -#define toupper(c) (islower(c) ? ((c) - 'a' + 'A') : (c)) - -unsigned long prom_strtoul(const char *cp, const char **endp) -{ - unsigned long result = 0, base = 10, value; - - if (*cp == '0') { - base = 8; - cp++; - if (toupper(*cp) == 'X') { - cp++; - base = 16; - } - } - - while (isxdigit(*cp) && - (value = isdigit(*cp) ? *cp - '0' : toupper(*cp) - 'A' + 10) < base) { - result = result * base + value; - cp++; - } - - if (endp) - *endp = cp; - - return result; -} - -unsigned long prom_memparse(const char *ptr, const char **retptr) -{ - unsigned long ret = prom_strtoul(ptr, retptr); - int shift = 0; - - /* - * We can't use a switch here because GCC *may* generate a - * jump table which won't work, because we're not running at - * the address we're linked at. - */ - if ('G' == **retptr || 'g' == **retptr) - shift = 30; - - if ('M' == **retptr || 'm' == **retptr) - shift = 20; - - if ('K' == **retptr || 'k' == **retptr) - shift = 10; - - if (shift) { - ret <<= shift; - (*retptr)++; - } - - return ret; -} - -/* - * Early parsing of the command line passed to the kernel, used for - * "mem=x" and the options that affect the iommu - */ -static void __init early_cmdline_parse(void) -{ - unsigned long offset = reloc_offset(); - struct prom_t *_prom = PTRRELOC(&prom); - char *opt, *p; - int l = 0; - - RELOC(prom_cmd_line[0]) = 0; - p = RELOC(prom_cmd_line); - if ((long)_prom->chosen > 0) - l = prom_getprop(_prom->chosen, "bootargs", p, COMMAND_LINE_SIZE-1); -#ifdef CONFIG_CMDLINE - if (l == 0) /* dbl check */ - strlcpy(RELOC(prom_cmd_line), - RELOC(CONFIG_CMDLINE), sizeof(prom_cmd_line)); -#endif /* CONFIG_CMDLINE */ - prom_printf("command line: %s\n", RELOC(prom_cmd_line)); - - opt = strstr(RELOC(prom_cmd_line), RELOC("iommu=")); - if (opt) { - prom_printf("iommu opt is: %s\n", opt); - opt += 6; - while (*opt && *opt == ' ') - opt++; - if (!strncmp(opt, RELOC("off"), 3)) - RELOC(ppc64_iommu_off) = 1; - else if (!strncmp(opt, RELOC("force"), 5)) - RELOC(iommu_force_on) = 1; - } - - opt = strstr(RELOC(prom_cmd_line), RELOC("mem=")); - if (opt) { - opt += 4; - RELOC(prom_memory_limit) = prom_memparse(opt, (const char **)&opt); - /* Align to 16 MB == size of large page */ - RELOC(prom_memory_limit) = ALIGN(RELOC(prom_memory_limit), 0x1000000); - } -} - -/* - * To tell the firmware what our capabilities are, we have to pass - * it a fake 32-bit ELF header containing a couple of PT_NOTE sections - * that contain structures that contain the actual values. - */ -static struct fake_elf { - Elf32_Ehdr elfhdr; - Elf32_Phdr phdr[2]; - struct chrpnote { - u32 namesz; - u32 descsz; - u32 type; - char name[8]; /* "PowerPC" */ - struct chrpdesc { - u32 real_mode; - u32 real_base; - u32 real_size; - u32 virt_base; - u32 virt_size; - u32 load_base; - } chrpdesc; - } chrpnote; - struct rpanote { - u32 namesz; - u32 descsz; - u32 type; - char name[24]; /* "IBM,RPA-Client-Config" */ - struct rpadesc { - u32 lpar_affinity; - u32 min_rmo_size; - u32 min_rmo_percent; - u32 max_pft_size; - u32 splpar; - u32 min_load; - u32 new_mem_def; - u32 ignore_me; - } rpadesc; - } rpanote; -} fake_elf = { - .elfhdr = { - .e_ident = { 0x7f, 'E', 'L', 'F', - ELFCLASS32, ELFDATA2MSB, EV_CURRENT }, - .e_type = ET_EXEC, /* yeah right */ - .e_machine = EM_PPC, - .e_version = EV_CURRENT, - .e_phoff = offsetof(struct fake_elf, phdr), - .e_phentsize = sizeof(Elf32_Phdr), - .e_phnum = 2 - }, - .phdr = { - [0] = { - .p_type = PT_NOTE, - .p_offset = offsetof(struct fake_elf, chrpnote), - .p_filesz = sizeof(struct chrpnote) - }, [1] = { - .p_type = PT_NOTE, - .p_offset = offsetof(struct fake_elf, rpanote), - .p_filesz = sizeof(struct rpanote) - } - }, - .chrpnote = { - .namesz = sizeof("PowerPC"), - .descsz = sizeof(struct chrpdesc), - .type = 0x1275, - .name = "PowerPC", - .chrpdesc = { - .real_mode = ~0U, /* ~0 means "don't care" */ - .real_base = ~0U, - .real_size = ~0U, - .virt_base = ~0U, - .virt_size = ~0U, - .load_base = ~0U - }, - }, - .rpanote = { - .namesz = sizeof("IBM,RPA-Client-Config"), - .descsz = sizeof(struct rpadesc), - .type = 0x12759999, - .name = "IBM,RPA-Client-Config", - .rpadesc = { - .lpar_affinity = 0, - .min_rmo_size = 64, /* in megabytes */ - .min_rmo_percent = 0, - .max_pft_size = 48, /* 2^48 bytes max PFT size */ - .splpar = 1, - .min_load = ~0U, - .new_mem_def = 0 - } - } -}; - -static void __init prom_send_capabilities(void) -{ - unsigned long offset = reloc_offset(); - ihandle elfloader; - - elfloader = call_prom("open", 1, 1, ADDR("/packages/elf-loader")); - if (elfloader == 0) { - prom_printf("couldn't open /packages/elf-loader\n"); - return; - } - call_prom("call-method", 3, 1, ADDR("process-elf-header"), - elfloader, ADDR(&fake_elf)); - call_prom("close", 1, 0, elfloader); -} - -/* - * Memory allocation strategy... our layout is normally: - * - * at 14Mb or more we vmlinux, then a gap and initrd. In some rare cases, initrd - * might end up beeing before the kernel though. We assume this won't override - * the final kernel at 0, we have no provision to handle that in this version, - * but it should hopefully never happen. - * - * alloc_top is set to the top of RMO, eventually shrink down if the TCEs overlap - * alloc_bottom is set to the top of kernel/initrd - * - * from there, allocations are done that way : rtas is allocated topmost, and - * the device-tree is allocated from the bottom. We try to grow the device-tree - * allocation as we progress. If we can't, then we fail, we don't currently have - * a facility to restart elsewhere, but that shouldn't be necessary neither - * - * Note that calls to reserve_mem have to be done explicitely, memory allocated - * with either alloc_up or alloc_down isn't automatically reserved. - */ - - -/* - * Allocates memory in the RMO upward from the kernel/initrd - * - * When align is 0, this is a special case, it means to allocate in place - * at the current location of alloc_bottom or fail (that is basically - * extending the previous allocation). Used for the device-tree flattening - */ -static unsigned long __init alloc_up(unsigned long size, unsigned long align) -{ - unsigned long offset = reloc_offset(); - unsigned long base = _ALIGN_UP(RELOC(alloc_bottom), align); - unsigned long addr = 0; - - prom_debug("alloc_up(%x, %x)\n", size, align); - if (RELOC(ram_top) == 0) - prom_panic("alloc_up() called with mem not initialized\n"); - - if (align) - base = _ALIGN_UP(RELOC(alloc_bottom), align); - else - base = RELOC(alloc_bottom); - - for(; (base + size) <= RELOC(alloc_top); - base = _ALIGN_UP(base + 0x100000, align)) { - prom_debug(" trying: 0x%x\n\r", base); - addr = (unsigned long)prom_claim(base, size, 0); - if (addr != PROM_ERROR) - break; - addr = 0; - if (align == 0) - break; - } - if (addr == 0) - return 0; - RELOC(alloc_bottom) = addr; - - prom_debug(" -> %x\n", addr); - prom_debug(" alloc_bottom : %x\n", RELOC(alloc_bottom)); - prom_debug(" alloc_top : %x\n", RELOC(alloc_top)); - prom_debug(" alloc_top_hi : %x\n", RELOC(alloc_top_high)); - prom_debug(" rmo_top : %x\n", RELOC(rmo_top)); - prom_debug(" ram_top : %x\n", RELOC(ram_top)); - - return addr; -} - -/* - * Allocates memory downard, either from top of RMO, or if highmem - * is set, from the top of RAM. Note that this one doesn't handle - * failures. In does claim memory if highmem is not set. - */ -static unsigned long __init alloc_down(unsigned long size, unsigned long align, - int highmem) -{ - unsigned long offset = reloc_offset(); - unsigned long base, addr = 0; - - prom_debug("alloc_down(%x, %x, %s)\n", size, align, - highmem ? RELOC("(high)") : RELOC("(low)")); - if (RELOC(ram_top) == 0) - prom_panic("alloc_down() called with mem not initialized\n"); - - if (highmem) { - /* Carve out storage for the TCE table. */ - addr = _ALIGN_DOWN(RELOC(alloc_top_high) - size, align); - if (addr <= RELOC(alloc_bottom)) - return 0; - else { - /* Will we bump into the RMO ? If yes, check out that we - * didn't overlap existing allocations there, if we did, - * we are dead, we must be the first in town ! - */ - if (addr < RELOC(rmo_top)) { - /* Good, we are first */ - if (RELOC(alloc_top) == RELOC(rmo_top)) - RELOC(alloc_top) = RELOC(rmo_top) = addr; - else - return 0; - } - RELOC(alloc_top_high) = addr; - } - goto bail; - } - - base = _ALIGN_DOWN(RELOC(alloc_top) - size, align); - for(; base > RELOC(alloc_bottom); base = _ALIGN_DOWN(base - 0x100000, align)) { - prom_debug(" trying: 0x%x\n\r", base); - addr = (unsigned long)prom_claim(base, size, 0); - if (addr != PROM_ERROR) - break; - addr = 0; - } - if (addr == 0) - return 0; - RELOC(alloc_top) = addr; - - bail: - prom_debug(" -> %x\n", addr); - prom_debug(" alloc_bottom : %x\n", RELOC(alloc_bottom)); - prom_debug(" alloc_top : %x\n", RELOC(alloc_top)); - prom_debug(" alloc_top_hi : %x\n", RELOC(alloc_top_high)); - prom_debug(" rmo_top : %x\n", RELOC(rmo_top)); - prom_debug(" ram_top : %x\n", RELOC(ram_top)); - - return addr; -} - -/* - * Parse a "reg" cell - */ -static unsigned long __init prom_next_cell(int s, cell_t **cellp) -{ - cell_t *p = *cellp; - unsigned long r = 0; - - /* Ignore more than 2 cells */ - while (s > 2) { - p++; - s--; - } - while (s) { - r <<= 32; - r |= *(p++); - s--; - } - - *cellp = p; - return r; -} - -/* - * Very dumb function for adding to the memory reserve list, but - * we don't need anything smarter at this point - * - * XXX Eventually check for collisions. They should NEVER happen - * if problems seem to show up, it would be a good start to track - * them down. - */ -static void reserve_mem(unsigned long base, unsigned long size) -{ - unsigned long offset = reloc_offset(); - unsigned long top = base + size; - unsigned long cnt = RELOC(mem_reserve_cnt); - - if (size == 0) - return; - - /* We need to always keep one empty entry so that we - * have our terminator with "size" set to 0 since we are - * dumb and just copy this entire array to the boot params - */ - base = _ALIGN_DOWN(base, PAGE_SIZE); - top = _ALIGN_UP(top, PAGE_SIZE); - size = top - base; - - if (cnt >= (MEM_RESERVE_MAP_SIZE - 1)) - prom_panic("Memory reserve map exhausted !\n"); - RELOC(mem_reserve_map)[cnt].base = base; - RELOC(mem_reserve_map)[cnt].size = size; - RELOC(mem_reserve_cnt) = cnt + 1; -} - -/* - * Initialize memory allocation mecanism, parse "memory" nodes and - * obtain that way the top of memory and RMO to setup out local allocator - */ -static void __init prom_init_mem(void) -{ - phandle node; - char *path, type[64]; - unsigned int plen; - cell_t *p, *endp; - unsigned long offset = reloc_offset(); - struct prom_t *_prom = PTRRELOC(&prom); - - /* - * We iterate the memory nodes to find - * 1) top of RMO (first node) - * 2) top of memory - */ - prom_debug("root_addr_cells: %x\n", (long)_prom->root_addr_cells); - prom_debug("root_size_cells: %x\n", (long)_prom->root_size_cells); - - prom_debug("scanning memory:\n"); - path = RELOC(prom_scratch); - - for (node = 0; prom_next_node(&node); ) { - type[0] = 0; - prom_getprop(node, "device_type", type, sizeof(type)); - - if (strcmp(type, RELOC("memory"))) - continue; - - plen = prom_getprop(node, "reg", RELOC(regbuf), sizeof(regbuf)); - if (plen > sizeof(regbuf)) { - prom_printf("memory node too large for buffer !\n"); - plen = sizeof(regbuf); - } - p = RELOC(regbuf); - endp = p + (plen / sizeof(cell_t)); - -#ifdef DEBUG_PROM - memset(path, 0, PROM_SCRATCH_SIZE); - call_prom("package-to-path", 3, 1, node, path, PROM_SCRATCH_SIZE-1); - prom_debug(" node %s :\n", path); -#endif /* DEBUG_PROM */ - - while ((endp - p) >= (_prom->root_addr_cells + _prom->root_size_cells)) { - unsigned long base, size; - - base = prom_next_cell(_prom->root_addr_cells, &p); - size = prom_next_cell(_prom->root_size_cells, &p); - - if (size == 0) - continue; - prom_debug(" %x %x\n", base, size); - if (base == 0) - RELOC(rmo_top) = size; - if ((base + size) > RELOC(ram_top)) - RELOC(ram_top) = base + size; - } - } - - RELOC(alloc_bottom) = PAGE_ALIGN(RELOC(klimit) - offset + 0x4000); - - /* Check if we have an initrd after the kernel, if we do move our bottom - * point to after it - */ - if (RELOC(prom_initrd_start)) { - if (RELOC(prom_initrd_end) > RELOC(alloc_bottom)) - RELOC(alloc_bottom) = PAGE_ALIGN(RELOC(prom_initrd_end)); - } - - /* - * If prom_memory_limit is set we reduce the upper limits *except* for - * alloc_top_high. This must be the real top of RAM so we can put - * TCE's up there. - */ - - RELOC(alloc_top_high) = RELOC(ram_top); - - if (RELOC(prom_memory_limit)) { - if (RELOC(prom_memory_limit) <= RELOC(alloc_bottom)) { - prom_printf("Ignoring mem=%x <= alloc_bottom.\n", - RELOC(prom_memory_limit)); - RELOC(prom_memory_limit) = 0; - } else if (RELOC(prom_memory_limit) >= RELOC(ram_top)) { - prom_printf("Ignoring mem=%x >= ram_top.\n", - RELOC(prom_memory_limit)); - RELOC(prom_memory_limit) = 0; - } else { - RELOC(ram_top) = RELOC(prom_memory_limit); - RELOC(rmo_top) = min(RELOC(rmo_top), RELOC(prom_memory_limit)); - } - } - - /* - * Setup our top alloc point, that is top of RMO or top of - * segment 0 when running non-LPAR. - */ - if ( RELOC(of_platform) == PLATFORM_PSERIES_LPAR ) - RELOC(alloc_top) = RELOC(rmo_top); - else - /* Some RS64 machines have buggy firmware where claims up at 1GB - * fails. Cap at 768MB as a workaround. Still plenty of room. - */ - RELOC(alloc_top) = RELOC(rmo_top) = min(0x30000000ul, RELOC(ram_top)); - - prom_printf("memory layout at init:\n"); - prom_printf(" memory_limit : %x (16 MB aligned)\n", RELOC(prom_memory_limit)); - prom_printf(" alloc_bottom : %x\n", RELOC(alloc_bottom)); - prom_printf(" alloc_top : %x\n", RELOC(alloc_top)); - prom_printf(" alloc_top_hi : %x\n", RELOC(alloc_top_high)); - prom_printf(" rmo_top : %x\n", RELOC(rmo_top)); - prom_printf(" ram_top : %x\n", RELOC(ram_top)); -} - - -/* - * Allocate room for and instanciate RTAS - */ -static void __init prom_instantiate_rtas(void) -{ - unsigned long offset = reloc_offset(); - struct prom_t *_prom = PTRRELOC(&prom); - phandle rtas_node; - ihandle rtas_inst; - u32 base, entry = 0; - u32 size = 0; - - prom_debug("prom_instantiate_rtas: start...\n"); - - rtas_node = call_prom("finddevice", 1, 1, ADDR("/rtas")); - prom_debug("rtas_node: %x\n", rtas_node); - if (!PHANDLE_VALID(rtas_node)) - return; - - prom_getprop(rtas_node, "rtas-size", &size, sizeof(size)); - if (size == 0) - return; - - base = alloc_down(size, PAGE_SIZE, 0); - if (base == 0) { - prom_printf("RTAS allocation failed !\n"); - return; - } - - rtas_inst = call_prom("open", 1, 1, ADDR("/rtas")); - if (!IHANDLE_VALID(rtas_inst)) { - prom_printf("opening rtas package failed"); - return; - } - - prom_printf("instantiating rtas at 0x%x ...", base); - - if (call_prom("call-method", 3, 2, - ADDR("instantiate-rtas"), - rtas_inst, base) != PROM_ERROR) { - entry = (long)_prom->args.rets[1]; - } - if (entry == 0) { - prom_printf(" failed\n"); - return; - } - prom_printf(" done\n"); - - reserve_mem(base, size); - - prom_setprop(rtas_node, "linux,rtas-base", &base, sizeof(base)); - prom_setprop(rtas_node, "linux,rtas-entry", &entry, sizeof(entry)); - - prom_debug("rtas base = 0x%x\n", base); - prom_debug("rtas entry = 0x%x\n", entry); - prom_debug("rtas size = 0x%x\n", (long)size); - - prom_debug("prom_instantiate_rtas: end...\n"); -} - - -/* - * Allocate room for and initialize TCE tables - */ -static void __init prom_initialize_tce_table(void) -{ - phandle node; - ihandle phb_node; - unsigned long offset = reloc_offset(); - char compatible[64], type[64], model[64]; - char *path = RELOC(prom_scratch); - u64 base, align; - u32 minalign, minsize; - u64 tce_entry, *tce_entryp; - u64 local_alloc_top, local_alloc_bottom; - u64 i; - - if (RELOC(ppc64_iommu_off)) - return; - - prom_debug("starting prom_initialize_tce_table\n"); - - /* Cache current top of allocs so we reserve a single block */ - local_alloc_top = RELOC(alloc_top_high); - local_alloc_bottom = local_alloc_top; - - /* Search all nodes looking for PHBs. */ - for (node = 0; prom_next_node(&node); ) { - compatible[0] = 0; - type[0] = 0; - model[0] = 0; - prom_getprop(node, "compatible", - compatible, sizeof(compatible)); - prom_getprop(node, "device_type", type, sizeof(type)); - prom_getprop(node, "model", model, sizeof(model)); - - if ((type[0] == 0) || (strstr(type, RELOC("pci")) == NULL)) - continue; - - /* Keep the old logic in tack to avoid regression. */ - if (compatible[0] != 0) { - if ((strstr(compatible, RELOC("python")) == NULL) && - (strstr(compatible, RELOC("Speedwagon")) == NULL) && - (strstr(compatible, RELOC("Winnipeg")) == NULL)) - continue; - } else if (model[0] != 0) { - if ((strstr(model, RELOC("ython")) == NULL) && - (strstr(model, RELOC("peedwagon")) == NULL) && - (strstr(model, RELOC("innipeg")) == NULL)) - continue; - } - - if (prom_getprop(node, "tce-table-minalign", &minalign, - sizeof(minalign)) == PROM_ERROR) - minalign = 0; - if (prom_getprop(node, "tce-table-minsize", &minsize, - sizeof(minsize)) == PROM_ERROR) - minsize = 4UL << 20; - - /* - * Even though we read what OF wants, we just set the table - * size to 4 MB. This is enough to map 2GB of PCI DMA space. - * By doing this, we avoid the pitfalls of trying to DMA to - * MMIO space and the DMA alias hole. - * - * On POWER4, firmware sets the TCE region by assuming - * each TCE table is 8MB. Using this memory for anything - * else will impact performance, so we always allocate 8MB. - * Anton - */ - if (__is_processor(PV_POWER4) || __is_processor(PV_POWER4p)) - minsize = 8UL << 20; - else - minsize = 4UL << 20; - - /* Align to the greater of the align or size */ - align = max(minalign, minsize); - base = alloc_down(minsize, align, 1); - if (base == 0) - prom_panic("ERROR, cannot find space for TCE table.\n"); - if (base < local_alloc_bottom) - local_alloc_bottom = base; - - /* Save away the TCE table attributes for later use. */ - prom_setprop(node, "linux,tce-base", &base, sizeof(base)); - prom_setprop(node, "linux,tce-size", &minsize, sizeof(minsize)); - - /* It seems OF doesn't null-terminate the path :-( */ - memset(path, 0, sizeof(path)); - /* Call OF to setup the TCE hardware */ - if (call_prom("package-to-path", 3, 1, node, - path, PROM_SCRATCH_SIZE-1) == PROM_ERROR) { - prom_printf("package-to-path failed\n"); - } - - prom_debug("TCE table: %s\n", path); - prom_debug("\tnode = 0x%x\n", node); - prom_debug("\tbase = 0x%x\n", base); - prom_debug("\tsize = 0x%x\n", minsize); - - /* Initialize the table to have a one-to-one mapping - * over the allocated size. - */ - tce_entryp = (unsigned long *)base; - for (i = 0; i < (minsize >> 3) ;tce_entryp++, i++) { - tce_entry = (i << PAGE_SHIFT); - tce_entry |= 0x3; - *tce_entryp = tce_entry; - } - - prom_printf("opening PHB %s", path); - phb_node = call_prom("open", 1, 1, path); - if (phb_node == 0) - prom_printf("... failed\n"); - else - prom_printf("... done\n"); - - call_prom("call-method", 6, 0, ADDR("set-64-bit-addressing"), - phb_node, -1, minsize, - (u32) base, (u32) (base >> 32)); - call_prom("close", 1, 0, phb_node); - } - - reserve_mem(local_alloc_bottom, local_alloc_top - local_alloc_bottom); - - if (RELOC(prom_memory_limit)) { - /* - * We align the start to a 16MB boundary so we can map the TCE area - * using large pages if possible. The end should be the top of RAM - * so no need to align it. - */ - RELOC(prom_tce_alloc_start) = _ALIGN_DOWN(local_alloc_bottom, 0x1000000); - RELOC(prom_tce_alloc_end) = local_alloc_top; - } - - /* Flag the first invalid entry */ - prom_debug("ending prom_initialize_tce_table\n"); -} - -/* - * With CHRP SMP we need to use the OF to start the other - * processors so we can't wait until smp_boot_cpus (the OF is - * trashed by then) so we have to put the processors into - * a holding pattern controlled by the kernel (not OF) before - * we destroy the OF. - * - * This uses a chunk of low memory, puts some holding pattern - * code there and sends the other processors off to there until - * smp_boot_cpus tells them to do something. The holding pattern - * checks that address until its cpu # is there, when it is that - * cpu jumps to __secondary_start(). smp_boot_cpus() takes care - * of setting those values. - * - * We also use physical address 0x4 here to tell when a cpu - * is in its holding pattern code. - * - * Fixup comment... DRENG / PPPBBB - Peter - * - * -- Cort - */ -static void __init prom_hold_cpus(void) -{ - unsigned long i; - unsigned int reg; - phandle node; - unsigned long offset = reloc_offset(); - char type[64]; - int cpuid = 0; - unsigned int interrupt_server[MAX_CPU_THREADS]; - unsigned int cpu_threads, hw_cpu_num; - int propsize; - extern void __secondary_hold(void); - extern unsigned long __secondary_hold_spinloop; - extern unsigned long __secondary_hold_acknowledge; - unsigned long *spinloop - = (void *)virt_to_abs(&__secondary_hold_spinloop); - unsigned long *acknowledge - = (void *)virt_to_abs(&__secondary_hold_acknowledge); - unsigned long secondary_hold - = virt_to_abs(*PTRRELOC((unsigned long *)__secondary_hold)); - struct prom_t *_prom = PTRRELOC(&prom); - - prom_debug("prom_hold_cpus: start...\n"); - prom_debug(" 1) spinloop = 0x%x\n", (unsigned long)spinloop); - prom_debug(" 1) *spinloop = 0x%x\n", *spinloop); - prom_debug(" 1) acknowledge = 0x%x\n", - (unsigned long)acknowledge); - prom_debug(" 1) *acknowledge = 0x%x\n", *acknowledge); - prom_debug(" 1) secondary_hold = 0x%x\n", secondary_hold); - - /* Set the common spinloop variable, so all of the secondary cpus - * will block when they are awakened from their OF spinloop. - * This must occur for both SMP and non SMP kernels, since OF will - * be trashed when we move the kernel. - */ - *spinloop = 0; - -#ifdef CONFIG_HMT - for (i=0; i < NR_CPUS; i++) { - RELOC(hmt_thread_data)[i].pir = 0xdeadbeef; - } -#endif - /* look for cpus */ - for (node = 0; prom_next_node(&node); ) { - type[0] = 0; - prom_getprop(node, "device_type", type, sizeof(type)); - if (strcmp(type, RELOC("cpu")) != 0) - continue; - - /* Skip non-configured cpus. */ - if (prom_getprop(node, "status", type, sizeof(type)) > 0) - if (strcmp(type, RELOC("okay")) != 0) - continue; - - reg = -1; - prom_getprop(node, "reg", ®, sizeof(reg)); - - prom_debug("\ncpuid = 0x%x\n", cpuid); - prom_debug("cpu hw idx = 0x%x\n", reg); - - /* Init the acknowledge var which will be reset by - * the secondary cpu when it awakens from its OF - * spinloop. - */ - *acknowledge = (unsigned long)-1; - - propsize = prom_getprop(node, "ibm,ppc-interrupt-server#s", - &interrupt_server, - sizeof(interrupt_server)); - if (propsize < 0) { - /* no property. old hardware has no SMT */ - cpu_threads = 1; - interrupt_server[0] = reg; /* fake it with phys id */ - } else { - /* We have a threaded processor */ - cpu_threads = propsize / sizeof(u32); - if (cpu_threads > MAX_CPU_THREADS) { - prom_printf("SMT: too many threads!\n" - "SMT: found %x, max is %x\n", - cpu_threads, MAX_CPU_THREADS); - cpu_threads = 1; /* ToDo: panic? */ - } - } - - hw_cpu_num = interrupt_server[0]; - if (hw_cpu_num != _prom->cpu) { - /* Primary Thread of non-boot cpu */ - prom_printf("%x : starting cpu hw idx %x... ", cpuid, reg); - call_prom("start-cpu", 3, 0, node, - secondary_hold, reg); - - for ( i = 0 ; (i < 100000000) && - (*acknowledge == ((unsigned long)-1)); i++ ) - mb(); - - if (*acknowledge == reg) { - prom_printf("done\n"); - /* We have to get every CPU out of OF, - * even if we never start it. */ - if (cpuid >= NR_CPUS) - goto next; - } else { - prom_printf("failed: %x\n", *acknowledge); - } - } -#ifdef CONFIG_SMP - else - prom_printf("%x : boot cpu %x\n", cpuid, reg); -#endif -next: -#ifdef CONFIG_SMP - /* Init paca for secondary threads. They start later. */ - for (i=1; i < cpu_threads; i++) { - cpuid++; - if (cpuid >= NR_CPUS) - continue; - } -#endif /* CONFIG_SMP */ - cpuid++; - } -#ifdef CONFIG_HMT - /* Only enable HMT on processors that provide support. */ - if (__is_processor(PV_PULSAR) || - __is_processor(PV_ICESTAR) || - __is_processor(PV_SSTAR)) { - prom_printf(" starting secondary threads\n"); - - for (i = 0; i < NR_CPUS; i += 2) { - if (!cpu_online(i)) - continue; - - if (i == 0) { - unsigned long pir = mfspr(SPRN_PIR); - if (__is_processor(PV_PULSAR)) { - RELOC(hmt_thread_data)[i].pir = - pir & 0x1f; - } else { - RELOC(hmt_thread_data)[i].pir = - pir & 0x3ff; - } - } - } - } else { - prom_printf("Processor is not HMT capable\n"); - } -#endif - - if (cpuid > NR_CPUS) - prom_printf("WARNING: maximum CPUs (" __stringify(NR_CPUS) - ") exceeded: ignoring extras\n"); - - prom_debug("prom_hold_cpus: end...\n"); -} - - -static void __init prom_init_client_services(unsigned long pp) -{ - unsigned long offset = reloc_offset(); - struct prom_t *_prom = PTRRELOC(&prom); - - /* Get a handle to the prom entry point before anything else */ - _prom->entry = pp; - - /* Init default value for phys size */ - _prom->root_size_cells = 1; - _prom->root_addr_cells = 2; - - /* get a handle for the stdout device */ - _prom->chosen = call_prom("finddevice", 1, 1, ADDR("/chosen")); - if (!PHANDLE_VALID(_prom->chosen)) - prom_panic("cannot find chosen"); /* msg won't be printed :( */ - - /* get device tree root */ - _prom->root = call_prom("finddevice", 1, 1, ADDR("/")); - if (!PHANDLE_VALID(_prom->root)) - prom_panic("cannot find device tree root"); /* msg won't be printed :( */ -} - -static void __init prom_init_stdout(void) -{ - unsigned long offset = reloc_offset(); - struct prom_t *_prom = PTRRELOC(&prom); - char *path = RELOC(of_stdout_device); - char type[16]; - u32 val; - - if (prom_getprop(_prom->chosen, "stdout", &val, sizeof(val)) <= 0) - prom_panic("cannot find stdout"); - - _prom->stdout = val; - - /* Get the full OF pathname of the stdout device */ - memset(path, 0, 256); - call_prom("instance-to-path", 3, 1, _prom->stdout, path, 255); - val = call_prom("instance-to-package", 1, 1, _prom->stdout); - prom_setprop(_prom->chosen, "linux,stdout-package", &val, sizeof(val)); - prom_printf("OF stdout device is: %s\n", RELOC(of_stdout_device)); - prom_setprop(_prom->chosen, "linux,stdout-path", - RELOC(of_stdout_device), strlen(RELOC(of_stdout_device))+1); - - /* If it's a display, note it */ - memset(type, 0, sizeof(type)); - prom_getprop(val, "device_type", type, sizeof(type)); - if (strcmp(type, RELOC("display")) == 0) { - _prom->disp_node = val; - prom_setprop(val, "linux,boot-display", NULL, 0); - } -} - -static void __init prom_close_stdin(void) -{ - unsigned long offset = reloc_offset(); - struct prom_t *_prom = PTRRELOC(&prom); - ihandle val; - - if (prom_getprop(_prom->chosen, "stdin", &val, sizeof(val)) > 0) - call_prom("close", 1, 0, val); -} - -static int __init prom_find_machine_type(void) -{ - unsigned long offset = reloc_offset(); - struct prom_t *_prom = PTRRELOC(&prom); - char compat[256]; - int len, i = 0; - phandle rtas; - - len = prom_getprop(_prom->root, "compatible", - compat, sizeof(compat)-1); - if (len > 0) { - compat[len] = 0; - while (i < len) { - char *p = &compat[i]; - int sl = strlen(p); - if (sl == 0) - break; - if (strstr(p, RELOC("Power Macintosh")) || - strstr(p, RELOC("MacRISC4"))) - return PLATFORM_POWERMAC; - if (strstr(p, RELOC("Momentum,Maple"))) - return PLATFORM_MAPLE; - i += sl + 1; - } - } - /* Default to pSeries. We need to know if we are running LPAR */ - rtas = call_prom("finddevice", 1, 1, ADDR("/rtas")); - if (PHANDLE_VALID(rtas)) { - int x = prom_getproplen(rtas, "ibm,hypertas-functions"); - if (x != PROM_ERROR) { - prom_printf("Hypertas detected, assuming LPAR !\n"); - return PLATFORM_PSERIES_LPAR; - } - } - return PLATFORM_PSERIES; -} - -static int __init prom_set_color(ihandle ih, int i, int r, int g, int b) -{ - unsigned long offset = reloc_offset(); - - return call_prom("call-method", 6, 1, ADDR("color!"), ih, i, b, g, r); -} - -/* - * If we have a display that we don't know how to drive, - * we will want to try to execute OF's open method for it - * later. However, OF will probably fall over if we do that - * we've taken over the MMU. - * So we check whether we will need to open the display, - * and if so, open it now. - */ -static void __init prom_check_displays(void) -{ - unsigned long offset = reloc_offset(); - struct prom_t *_prom = PTRRELOC(&prom); - char type[16], *path; - phandle node; - ihandle ih; - int i; - - static unsigned char default_colors[] = { - 0x00, 0x00, 0x00, - 0x00, 0x00, 0xaa, - 0x00, 0xaa, 0x00, - 0x00, 0xaa, 0xaa, - 0xaa, 0x00, 0x00, - 0xaa, 0x00, 0xaa, - 0xaa, 0xaa, 0x00, - 0xaa, 0xaa, 0xaa, - 0x55, 0x55, 0x55, - 0x55, 0x55, 0xff, - 0x55, 0xff, 0x55, - 0x55, 0xff, 0xff, - 0xff, 0x55, 0x55, - 0xff, 0x55, 0xff, - 0xff, 0xff, 0x55, - 0xff, 0xff, 0xff - }; - const unsigned char *clut; - - prom_printf("Looking for displays\n"); - for (node = 0; prom_next_node(&node); ) { - memset(type, 0, sizeof(type)); - prom_getprop(node, "device_type", type, sizeof(type)); - if (strcmp(type, RELOC("display")) != 0) - continue; - - /* It seems OF doesn't null-terminate the path :-( */ - path = RELOC(prom_scratch); - memset(path, 0, PROM_SCRATCH_SIZE); - - /* - * leave some room at the end of the path for appending extra - * arguments - */ - if (call_prom("package-to-path", 3, 1, node, path, - PROM_SCRATCH_SIZE-10) == PROM_ERROR) - continue; - prom_printf("found display : %s, opening ... ", path); - - ih = call_prom("open", 1, 1, path); - if (ih == 0) { - prom_printf("failed\n"); - continue; - } - - /* Success */ - prom_printf("done\n"); - prom_setprop(node, "linux,opened", NULL, 0); - - /* - * stdout wasn't a display node, pick the first we can find - * for btext - */ - if (_prom->disp_node == 0) - _prom->disp_node = node; - - /* Setup a useable color table when the appropriate - * method is available. Should update this to set-colors */ - clut = RELOC(default_colors); - for (i = 0; i < 32; i++, clut += 3) - if (prom_set_color(ih, i, clut[0], clut[1], - clut[2]) != 0) - break; - -#ifdef CONFIG_LOGO_LINUX_CLUT224 - clut = PTRRELOC(RELOC(logo_linux_clut224.clut)); - for (i = 0; i < RELOC(logo_linux_clut224.clutsize); i++, clut += 3) - if (prom_set_color(ih, i + 32, clut[0], clut[1], - clut[2]) != 0) - break; -#endif /* CONFIG_LOGO_LINUX_CLUT224 */ - } -} - - -/* Return (relocated) pointer to this much memory: moves initrd if reqd. */ -static void __init *make_room(unsigned long *mem_start, unsigned long *mem_end, - unsigned long needed, unsigned long align) -{ - unsigned long offset = reloc_offset(); - void *ret; - - *mem_start = _ALIGN(*mem_start, align); - while ((*mem_start + needed) > *mem_end) { - unsigned long room, chunk; - - prom_debug("Chunk exhausted, claiming more at %x...\n", - RELOC(alloc_bottom)); - room = RELOC(alloc_top) - RELOC(alloc_bottom); - if (room > DEVTREE_CHUNK_SIZE) - room = DEVTREE_CHUNK_SIZE; - if (room < PAGE_SIZE) - prom_panic("No memory for flatten_device_tree (no room)"); - chunk = alloc_up(room, 0); - if (chunk == 0) - prom_panic("No memory for flatten_device_tree (claim failed)"); - *mem_end = RELOC(alloc_top); - } - - ret = (void *)*mem_start; - *mem_start += needed; - - return ret; -} - -#define dt_push_token(token, mem_start, mem_end) \ - do { *((u32 *)make_room(mem_start, mem_end, 4, 4)) = token; } while(0) - -static unsigned long __init dt_find_string(char *str) -{ - unsigned long offset = reloc_offset(); - char *s, *os; - - s = os = (char *)RELOC(dt_string_start); - s += 4; - while (s < (char *)RELOC(dt_string_end)) { - if (strcmp(s, str) == 0) - return s - os; - s += strlen(s) + 1; - } - return 0; -} - -/* - * The Open Firmware 1275 specification states properties must be 31 bytes or - * less, however not all firmwares obey this. Make it 64 bytes to be safe. - */ -#define MAX_PROPERTY_NAME 64 - -static void __init scan_dt_build_strings(phandle node, - unsigned long *mem_start, - unsigned long *mem_end) -{ - unsigned long offset = reloc_offset(); - char *prev_name, *namep, *sstart; - unsigned long soff; - phandle child; - - sstart = (char *)RELOC(dt_string_start); - - /* get and store all property names */ - prev_name = RELOC(""); - for (;;) { - /* 64 is max len of name including nul. */ - namep = make_room(mem_start, mem_end, MAX_PROPERTY_NAME, 1); - if (call_prom("nextprop", 3, 1, node, prev_name, namep) != 1) { - /* No more nodes: unwind alloc */ - *mem_start = (unsigned long)namep; - break; - } - - /* skip "name" */ - if (strcmp(namep, RELOC("name")) == 0) { - *mem_start = (unsigned long)namep; - prev_name = RELOC("name"); - continue; - } - /* get/create string entry */ - soff = dt_find_string(namep); - if (soff != 0) { - *mem_start = (unsigned long)namep; - namep = sstart + soff; - } else { - /* Trim off some if we can */ - *mem_start = (unsigned long)namep + strlen(namep) + 1; - RELOC(dt_string_end) = *mem_start; - } - prev_name = namep; - } - - /* do all our children */ - child = call_prom("child", 1, 1, node); - while (child != 0) { - scan_dt_build_strings(child, mem_start, mem_end); - child = call_prom("peer", 1, 1, child); - } -} - -static void __init scan_dt_build_struct(phandle node, unsigned long *mem_start, - unsigned long *mem_end) -{ - phandle child; - char *namep, *prev_name, *sstart, *p, *ep, *lp, *path; - unsigned long soff; - unsigned char *valp; - unsigned long offset = reloc_offset(); - static char pname[MAX_PROPERTY_NAME]; - int l; - - dt_push_token(OF_DT_BEGIN_NODE, mem_start, mem_end); - - /* get the node's full name */ - namep = (char *)*mem_start; - l = call_prom("package-to-path", 3, 1, node, - namep, *mem_end - *mem_start); - if (l >= 0) { - /* Didn't fit? Get more room. */ - if ((l+1) > (*mem_end - *mem_start)) { - namep = make_room(mem_start, mem_end, l+1, 1); - call_prom("package-to-path", 3, 1, node, namep, l); - } - namep[l] = '\0'; - - /* Fixup an Apple bug where they have bogus \0 chars in the - * middle of the path in some properties - */ - for (p = namep, ep = namep + l; p < ep; p++) - if (*p == '\0') { - memmove(p, p+1, ep - p); - ep--; l--; p--; - } - - /* now try to extract the unit name in that mess */ - for (p = namep, lp = NULL; *p; p++) - if (*p == '/') - lp = p + 1; - if (lp != NULL) - memmove(namep, lp, strlen(lp) + 1); - *mem_start = _ALIGN(((unsigned long) namep) + - strlen(namep) + 1, 4); - } - - /* get it again for debugging */ - path = RELOC(prom_scratch); - memset(path, 0, PROM_SCRATCH_SIZE); - call_prom("package-to-path", 3, 1, node, path, PROM_SCRATCH_SIZE-1); - - /* get and store all properties */ - prev_name = RELOC(""); - sstart = (char *)RELOC(dt_string_start); - for (;;) { - if (call_prom("nextprop", 3, 1, node, prev_name, - RELOC(pname)) != 1) - break; - - /* skip "name" */ - if (strcmp(RELOC(pname), RELOC("name")) == 0) { - prev_name = RELOC("name"); - continue; - } - - /* find string offset */ - soff = dt_find_string(RELOC(pname)); - if (soff == 0) { - prom_printf("WARNING: Can't find string index for" - " <%s>, node %s\n", RELOC(pname), path); - break; - } - prev_name = sstart + soff; - - /* get length */ - l = call_prom("getproplen", 2, 1, node, RELOC(pname)); - - /* sanity checks */ - if (l == PROM_ERROR) - continue; - if (l > MAX_PROPERTY_LENGTH) { - prom_printf("WARNING: ignoring large property "); - /* It seems OF doesn't null-terminate the path :-( */ - prom_printf("[%s] ", path); - prom_printf("%s length 0x%x\n", RELOC(pname), l); - continue; - } - - /* push property head */ - dt_push_token(OF_DT_PROP, mem_start, mem_end); - dt_push_token(l, mem_start, mem_end); - dt_push_token(soff, mem_start, mem_end); - - /* push property content */ - valp = make_room(mem_start, mem_end, l, 4); - call_prom("getprop", 4, 1, node, RELOC(pname), valp, l); - *mem_start = _ALIGN(*mem_start, 4); - } - - /* Add a "linux,phandle" property. */ - soff = dt_find_string(RELOC("linux,phandle")); - if (soff == 0) - prom_printf("WARNING: Can't find string index for" - " <linux-phandle> node %s\n", path); - else { - dt_push_token(OF_DT_PROP, mem_start, mem_end); - dt_push_token(4, mem_start, mem_end); - dt_push_token(soff, mem_start, mem_end); - valp = make_room(mem_start, mem_end, 4, 4); - *(u32 *)valp = node; - } - - /* do all our children */ - child = call_prom("child", 1, 1, node); - while (child != 0) { - scan_dt_build_struct(child, mem_start, mem_end); - child = call_prom("peer", 1, 1, child); - } - - dt_push_token(OF_DT_END_NODE, mem_start, mem_end); -} - -static void __init flatten_device_tree(void) -{ - phandle root; - unsigned long offset = reloc_offset(); - unsigned long mem_start, mem_end, room; - struct boot_param_header *hdr; - struct prom_t *_prom = PTRRELOC(&prom); - char *namep; - u64 *rsvmap; - - /* - * Check how much room we have between alloc top & bottom (+/- a - * few pages), crop to 4Mb, as this is our "chuck" size - */ - room = RELOC(alloc_top) - RELOC(alloc_bottom) - 0x4000; - if (room > DEVTREE_CHUNK_SIZE) - room = DEVTREE_CHUNK_SIZE; - prom_debug("starting device tree allocs at %x\n", RELOC(alloc_bottom)); - - /* Now try to claim that */ - mem_start = (unsigned long)alloc_up(room, PAGE_SIZE); - if (mem_start == 0) - prom_panic("Can't allocate initial device-tree chunk\n"); - mem_end = RELOC(alloc_top); - - /* Get root of tree */ - root = call_prom("peer", 1, 1, (phandle)0); - if (root == (phandle)0) - prom_panic ("couldn't get device tree root\n"); - - /* Build header and make room for mem rsv map */ - mem_start = _ALIGN(mem_start, 4); - hdr = make_room(&mem_start, &mem_end, - sizeof(struct boot_param_header), 4); - RELOC(dt_header_start) = (unsigned long)hdr; - rsvmap = make_room(&mem_start, &mem_end, sizeof(mem_reserve_map), 8); - - /* Start of strings */ - mem_start = PAGE_ALIGN(mem_start); - RELOC(dt_string_start) = mem_start; - mem_start += 4; /* hole */ - - /* Add "linux,phandle" in there, we'll need it */ - namep = make_room(&mem_start, &mem_end, 16, 1); - strcpy(namep, RELOC("linux,phandle")); - mem_start = (unsigned long)namep + strlen(namep) + 1; - - /* Build string array */ - prom_printf("Building dt strings...\n"); - scan_dt_build_strings(root, &mem_start, &mem_end); - RELOC(dt_string_end) = mem_start; - - /* Build structure */ - mem_start = PAGE_ALIGN(mem_start); - RELOC(dt_struct_start) = mem_start; - prom_printf("Building dt structure...\n"); - scan_dt_build_struct(root, &mem_start, &mem_end); - dt_push_token(OF_DT_END, &mem_start, &mem_end); - RELOC(dt_struct_end) = PAGE_ALIGN(mem_start); - - /* Finish header */ - hdr->boot_cpuid_phys = _prom->cpu; - hdr->magic = OF_DT_HEADER; - hdr->totalsize = RELOC(dt_struct_end) - RELOC(dt_header_start); - hdr->off_dt_struct = RELOC(dt_struct_start) - RELOC(dt_header_start); - hdr->off_dt_strings = RELOC(dt_string_start) - RELOC(dt_header_start); - hdr->dt_strings_size = RELOC(dt_string_end) - RELOC(dt_string_start); - hdr->off_mem_rsvmap = ((unsigned long)rsvmap) - RELOC(dt_header_start); - hdr->version = OF_DT_VERSION; - /* Version 16 is not backward compatible */ - hdr->last_comp_version = 0x10; - - /* Reserve the whole thing and copy the reserve map in, we - * also bump mem_reserve_cnt to cause further reservations to - * fail since it's too late. - */ - reserve_mem(RELOC(dt_header_start), hdr->totalsize); - memcpy(rsvmap, RELOC(mem_reserve_map), sizeof(mem_reserve_map)); - -#ifdef DEBUG_PROM - { - int i; - prom_printf("reserved memory map:\n"); - for (i = 0; i < RELOC(mem_reserve_cnt); i++) - prom_printf(" %x - %x\n", RELOC(mem_reserve_map)[i].base, - RELOC(mem_reserve_map)[i].size); - } -#endif - RELOC(mem_reserve_cnt) = MEM_RESERVE_MAP_SIZE; - - prom_printf("Device tree strings 0x%x -> 0x%x\n", - RELOC(dt_string_start), RELOC(dt_string_end)); - prom_printf("Device tree struct 0x%x -> 0x%x\n", - RELOC(dt_struct_start), RELOC(dt_struct_end)); - -} - - -static void __init fixup_device_tree(void) -{ - unsigned long offset = reloc_offset(); - phandle u3, i2c, mpic; - u32 u3_rev; - u32 interrupts[2]; - u32 parent; - - /* Some G5s have a missing interrupt definition, fix it up here */ - u3 = call_prom("finddevice", 1, 1, ADDR("/u3@0,f8000000")); - if (!PHANDLE_VALID(u3)) - return; - i2c = call_prom("finddevice", 1, 1, ADDR("/u3@0,f8000000/i2c@f8001000")); - if (!PHANDLE_VALID(i2c)) - return; - mpic = call_prom("finddevice", 1, 1, ADDR("/u3@0,f8000000/mpic@f8040000")); - if (!PHANDLE_VALID(mpic)) - return; - - /* check if proper rev of u3 */ - if (prom_getprop(u3, "device-rev", &u3_rev, sizeof(u3_rev)) - == PROM_ERROR) - return; - if (u3_rev != 0x35 && u3_rev != 0x37) - return; - /* does it need fixup ? */ - if (prom_getproplen(i2c, "interrupts") > 0) - return; - - prom_printf("fixing up bogus interrupts for u3 i2c...\n"); - - /* interrupt on this revision of u3 is number 0 and level */ - interrupts[0] = 0; - interrupts[1] = 1; - prom_setprop(i2c, "interrupts", &interrupts, sizeof(interrupts)); - parent = (u32)mpic; - prom_setprop(i2c, "interrupt-parent", &parent, sizeof(parent)); -} - - -static void __init prom_find_boot_cpu(void) -{ - unsigned long offset = reloc_offset(); - struct prom_t *_prom = PTRRELOC(&prom); - u32 getprop_rval; - ihandle prom_cpu; - phandle cpu_pkg; - - if (prom_getprop(_prom->chosen, "cpu", &prom_cpu, sizeof(prom_cpu)) <= 0) - prom_panic("cannot find boot cpu"); - - cpu_pkg = call_prom("instance-to-package", 1, 1, prom_cpu); - - prom_getprop(cpu_pkg, "reg", &getprop_rval, sizeof(getprop_rval)); - _prom->cpu = getprop_rval; - - prom_debug("Booting CPU hw index = 0x%x\n", _prom->cpu); -} - -static void __init prom_check_initrd(unsigned long r3, unsigned long r4) -{ -#ifdef CONFIG_BLK_DEV_INITRD - unsigned long offset = reloc_offset(); - struct prom_t *_prom = PTRRELOC(&prom); - - if ( r3 && r4 && r4 != 0xdeadbeef) { - u64 val; - - RELOC(prom_initrd_start) = (r3 >= KERNELBASE) ? __pa(r3) : r3; - RELOC(prom_initrd_end) = RELOC(prom_initrd_start) + r4; - - val = (u64)RELOC(prom_initrd_start); - prom_setprop(_prom->chosen, "linux,initrd-start", &val, sizeof(val)); - val = (u64)RELOC(prom_initrd_end); - prom_setprop(_prom->chosen, "linux,initrd-end", &val, sizeof(val)); - - reserve_mem(RELOC(prom_initrd_start), - RELOC(prom_initrd_end) - RELOC(prom_initrd_start)); - - prom_debug("initrd_start=0x%x\n", RELOC(prom_initrd_start)); - prom_debug("initrd_end=0x%x\n", RELOC(prom_initrd_end)); - } -#endif /* CONFIG_BLK_DEV_INITRD */ -} - -/* - * We enter here early on, when the Open Firmware prom is still - * handling exceptions and the MMU hash table for us. - */ - -unsigned long __init prom_init(unsigned long r3, unsigned long r4, unsigned long pp, - unsigned long r6, unsigned long r7) -{ - unsigned long offset = reloc_offset(); - struct prom_t *_prom = PTRRELOC(&prom); - unsigned long phys = KERNELBASE - offset; - u32 getprop_rval; - - /* - * First zero the BSS - */ - memset(PTRRELOC(&__bss_start), 0, __bss_stop - __bss_start); - - /* - * Init interface to Open Firmware, get some node references, - * like /chosen - */ - prom_init_client_services(pp); - - /* - * Init prom stdout device - */ - prom_init_stdout(); - prom_debug("klimit=0x%x\n", RELOC(klimit)); - prom_debug("offset=0x%x\n", offset); - - /* - * Check for an initrd - */ - prom_check_initrd(r3, r4); - - /* - * Get default machine type. At this point, we do not differenciate - * between pSeries SMP and pSeries LPAR - */ - RELOC(of_platform) = prom_find_machine_type(); - getprop_rval = RELOC(of_platform); - prom_setprop(_prom->chosen, "linux,platform", - &getprop_rval, sizeof(getprop_rval)); - - /* - * On pSeries, inform the firmware about our capabilities - */ - if (RELOC(of_platform) & PLATFORM_PSERIES) - prom_send_capabilities(); - - /* - * On pSeries and Cell, copy the CPU hold code - */ - if (RELOC(of_platform) & (PLATFORM_PSERIES | PLATFORM_CELL)) - copy_and_flush(0, KERNELBASE - offset, 0x100, 0); - - /* - * Get memory cells format - */ - getprop_rval = 1; - prom_getprop(_prom->root, "#size-cells", - &getprop_rval, sizeof(getprop_rval)); - _prom->root_size_cells = getprop_rval; - getprop_rval = 2; - prom_getprop(_prom->root, "#address-cells", - &getprop_rval, sizeof(getprop_rval)); - _prom->root_addr_cells = getprop_rval; - - /* - * Do early parsing of command line - */ - early_cmdline_parse(); - - /* - * Initialize memory management within prom_init - */ - prom_init_mem(); - - /* - * Determine which cpu is actually running right _now_ - */ - prom_find_boot_cpu(); - - /* - * Initialize display devices - */ - prom_check_displays(); - - /* - * Initialize IOMMU (TCE tables) on pSeries. Do that before anything else - * that uses the allocator, we need to make sure we get the top of memory - * available for us here... - */ - if (RELOC(of_platform) == PLATFORM_PSERIES) - prom_initialize_tce_table(); - - /* - * On non-powermacs, try to instantiate RTAS and puts all CPUs - * in spin-loops. PowerMacs don't have a working RTAS and use - * a different way to spin CPUs - */ - if (RELOC(of_platform) != PLATFORM_POWERMAC) { - prom_instantiate_rtas(); - prom_hold_cpus(); - } - - /* - * Fill in some infos for use by the kernel later on - */ - if (RELOC(ppc64_iommu_off)) - prom_setprop(_prom->chosen, "linux,iommu-off", NULL, 0); - - if (RELOC(iommu_force_on)) - prom_setprop(_prom->chosen, "linux,iommu-force-on", NULL, 0); - - if (RELOC(prom_memory_limit)) - prom_setprop(_prom->chosen, "linux,memory-limit", - PTRRELOC(&prom_memory_limit), sizeof(RELOC(prom_memory_limit))); - - if (RELOC(prom_tce_alloc_start)) { - prom_setprop(_prom->chosen, "linux,tce-alloc-start", - PTRRELOC(&prom_tce_alloc_start), sizeof(RELOC(prom_tce_alloc_start))); - prom_setprop(_prom->chosen, "linux,tce-alloc-end", - PTRRELOC(&prom_tce_alloc_end), sizeof(RELOC(prom_tce_alloc_end))); - } - - /* - * Fixup any known bugs in the device-tree - */ - fixup_device_tree(); - - /* - * Now finally create the flattened device-tree - */ - prom_printf("copying OF device tree ...\n"); - flatten_device_tree(); - - /* in case stdin is USB and still active on IBM machines... */ - prom_close_stdin(); - - /* - * Call OF "quiesce" method to shut down pending DMA's from - * devices etc... - */ - prom_printf("Calling quiesce ...\n"); - call_prom("quiesce", 0, 0); - - /* - * And finally, call the kernel passing it the flattened device - * tree and NULL as r5, thus triggering the new entry point which - * is common to us and kexec - */ - prom_printf("returning from prom_init\n"); - prom_debug("->dt_header_start=0x%x\n", RELOC(dt_header_start)); - prom_debug("->phys=0x%x\n", phys); - - __start(RELOC(dt_header_start), phys, 0); - - return 0; -} - diff --git a/arch/ppc64/kernel/rtas_pci.c b/arch/ppc64/kernel/rtas_pci.c deleted file mode 100644 index 3ad15c90fbbd..000000000000 --- a/arch/ppc64/kernel/rtas_pci.c +++ /dev/null @@ -1,516 +0,0 @@ -/* - * arch/ppc64/kernel/rtas_pci.c - * - * Copyright (C) 2001 Dave Engebretsen, IBM Corporation - * Copyright (C) 2003 Anton Blanchard <anton@au.ibm.com>, IBM - * - * RTAS specific routines for PCI. - * - * Based on code from pci.c, chrp_pci.c and pSeries_pci.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/kernel.h> -#include <linux/threads.h> -#include <linux/pci.h> -#include <linux/string.h> -#include <linux/init.h> -#include <linux/bootmem.h> - -#include <asm/io.h> -#include <asm/pgtable.h> -#include <asm/irq.h> -#include <asm/prom.h> -#include <asm/machdep.h> -#include <asm/pci-bridge.h> -#include <asm/iommu.h> -#include <asm/rtas.h> -#include <asm/mpic.h> -#include <asm/ppc-pci.h> - -/* RTAS tokens */ -static int read_pci_config; -static int write_pci_config; -static int ibm_read_pci_config; -static int ibm_write_pci_config; - -static int config_access_valid(struct pci_dn *dn, int where) -{ - if (where < 256) - return 1; - if (where < 4096 && dn->pci_ext_config_space) - return 1; - - return 0; -} - -static int of_device_available(struct device_node * dn) -{ - char * status; - - status = get_property(dn, "status", NULL); - - if (!status) - return 1; - - if (!strcmp(status, "okay")) - return 1; - - return 0; -} - -static int rtas_read_config(struct device_node *dn, int where, int size, u32 *val) -{ - int returnval = -1; - unsigned long buid, addr; - int ret; - struct pci_dn *pdn; - - if (!dn || !dn->data) - return PCIBIOS_DEVICE_NOT_FOUND; - pdn = dn->data; - if (!config_access_valid(pdn, where)) - return PCIBIOS_BAD_REGISTER_NUMBER; - - addr = ((where & 0xf00) << 20) | (pdn->busno << 16) | - (pdn->devfn << 8) | (where & 0xff); - buid = pdn->phb->buid; - if (buid) { - ret = rtas_call(ibm_read_pci_config, 4, 2, &returnval, - addr, buid >> 32, buid & 0xffffffff, size); - } else { - ret = rtas_call(read_pci_config, 2, 2, &returnval, addr, size); - } - *val = returnval; - - if (ret) - return PCIBIOS_DEVICE_NOT_FOUND; - - if (returnval == EEH_IO_ERROR_VALUE(size) && - eeh_dn_check_failure (dn, NULL)) - return PCIBIOS_DEVICE_NOT_FOUND; - - return PCIBIOS_SUCCESSFUL; -} - -static int rtas_pci_read_config(struct pci_bus *bus, - unsigned int devfn, - int where, int size, u32 *val) -{ - struct device_node *busdn, *dn; - - if (bus->self) - busdn = pci_device_to_OF_node(bus->self); - else - busdn = bus->sysdata; /* must be a phb */ - - /* Search only direct children of the bus */ - for (dn = busdn->child; dn; dn = dn->sibling) - if (dn->data && PCI_DN(dn)->devfn == devfn - && of_device_available(dn)) - return rtas_read_config(dn, where, size, val); - - return PCIBIOS_DEVICE_NOT_FOUND; -} - -int rtas_write_config(struct device_node *dn, int where, int size, u32 val) -{ - unsigned long buid, addr; - int ret; - struct pci_dn *pdn; - - if (!dn || !dn->data) - return PCIBIOS_DEVICE_NOT_FOUND; - pdn = dn->data; - if (!config_access_valid(pdn, where)) - return PCIBIOS_BAD_REGISTER_NUMBER; - - addr = ((where & 0xf00) << 20) | (pdn->busno << 16) | - (pdn->devfn << 8) | (where & 0xff); - buid = pdn->phb->buid; - if (buid) { - ret = rtas_call(ibm_write_pci_config, 5, 1, NULL, addr, buid >> 32, buid & 0xffffffff, size, (ulong) val); - } else { - ret = rtas_call(write_pci_config, 3, 1, NULL, addr, size, (ulong)val); - } - - if (ret) - return PCIBIOS_DEVICE_NOT_FOUND; - - return PCIBIOS_SUCCESSFUL; -} - -static int rtas_pci_write_config(struct pci_bus *bus, - unsigned int devfn, - int where, int size, u32 val) -{ - struct device_node *busdn, *dn; - - if (bus->self) - busdn = pci_device_to_OF_node(bus->self); - else - busdn = bus->sysdata; /* must be a phb */ - - /* Search only direct children of the bus */ - for (dn = busdn->child; dn; dn = dn->sibling) - if (dn->data && PCI_DN(dn)->devfn == devfn - && of_device_available(dn)) - return rtas_write_config(dn, where, size, val); - return PCIBIOS_DEVICE_NOT_FOUND; -} - -struct pci_ops rtas_pci_ops = { - rtas_pci_read_config, - rtas_pci_write_config -}; - -int is_python(struct device_node *dev) -{ - char *model = (char *)get_property(dev, "model", NULL); - - if (model && strstr(model, "Python")) - return 1; - - return 0; -} - -static int get_phb_reg_prop(struct device_node *dev, - unsigned int addr_size_words, - struct reg_property64 *reg) -{ - unsigned int *ui_ptr = NULL, len; - - /* Found a PHB, now figure out where his registers are mapped. */ - ui_ptr = (unsigned int *)get_property(dev, "reg", &len); - if (ui_ptr == NULL) - return 1; - - if (addr_size_words == 1) { - reg->address = ((struct reg_property32 *)ui_ptr)->address; - reg->size = ((struct reg_property32 *)ui_ptr)->size; - } else { - *reg = *((struct reg_property64 *)ui_ptr); - } - - return 0; -} - -static void python_countermeasures(struct device_node *dev, - unsigned int addr_size_words) -{ - struct reg_property64 reg_struct; - void __iomem *chip_regs; - volatile u32 val; - - if (get_phb_reg_prop(dev, addr_size_words, ®_struct)) - return; - - /* Python's register file is 1 MB in size. */ - chip_regs = ioremap(reg_struct.address & ~(0xfffffUL), 0x100000); - - /* - * Firmware doesn't always clear this bit which is critical - * for good performance - Anton - */ - -#define PRG_CL_RESET_VALID 0x00010000 - - val = in_be32(chip_regs + 0xf6030); - if (val & PRG_CL_RESET_VALID) { - printk(KERN_INFO "Python workaround: "); - val &= ~PRG_CL_RESET_VALID; - out_be32(chip_regs + 0xf6030, val); - /* - * We must read it back for changes to - * take effect - */ - val = in_be32(chip_regs + 0xf6030); - printk("reg0: %x\n", val); - } - - iounmap(chip_regs); -} - -void __init init_pci_config_tokens (void) -{ - read_pci_config = rtas_token("read-pci-config"); - write_pci_config = rtas_token("write-pci-config"); - ibm_read_pci_config = rtas_token("ibm,read-pci-config"); - ibm_write_pci_config = rtas_token("ibm,write-pci-config"); -} - -unsigned long __devinit get_phb_buid (struct device_node *phb) -{ - int addr_cells; - unsigned int *buid_vals; - unsigned int len; - unsigned long buid; - - if (ibm_read_pci_config == -1) return 0; - - /* PHB's will always be children of the root node, - * or so it is promised by the current firmware. */ - if (phb->parent == NULL) - return 0; - if (phb->parent->parent) - return 0; - - buid_vals = (unsigned int *) get_property(phb, "reg", &len); - if (buid_vals == NULL) - return 0; - - addr_cells = prom_n_addr_cells(phb); - if (addr_cells == 1) { - buid = (unsigned long) buid_vals[0]; - } else { - buid = (((unsigned long)buid_vals[0]) << 32UL) | - (((unsigned long)buid_vals[1]) & 0xffffffff); - } - return buid; -} - -static int phb_set_bus_ranges(struct device_node *dev, - struct pci_controller *phb) -{ - int *bus_range; - unsigned int len; - - bus_range = (int *) get_property(dev, "bus-range", &len); - if (bus_range == NULL || len < 2 * sizeof(int)) { - return 1; - } - - phb->first_busno = bus_range[0]; - phb->last_busno = bus_range[1]; - - return 0; -} - -static int __devinit setup_phb(struct device_node *dev, - struct pci_controller *phb, - unsigned int addr_size_words) -{ - pci_setup_pci_controller(phb); - - if (is_python(dev)) - python_countermeasures(dev, addr_size_words); - - if (phb_set_bus_ranges(dev, phb)) - return 1; - - phb->arch_data = dev; - phb->ops = &rtas_pci_ops; - phb->buid = get_phb_buid(dev); - - return 0; -} - -static void __devinit add_linux_pci_domain(struct device_node *dev, - struct pci_controller *phb, - struct property *of_prop) -{ - memset(of_prop, 0, sizeof(struct property)); - of_prop->name = "linux,pci-domain"; - of_prop->length = sizeof(phb->global_number); - of_prop->value = (unsigned char *)&of_prop[1]; - memcpy(of_prop->value, &phb->global_number, sizeof(phb->global_number)); - prom_add_property(dev, of_prop); -} - -static struct pci_controller * __init alloc_phb(struct device_node *dev, - unsigned int addr_size_words) -{ - struct pci_controller *phb; - struct property *of_prop; - - phb = alloc_bootmem(sizeof(struct pci_controller)); - if (phb == NULL) - return NULL; - - of_prop = alloc_bootmem(sizeof(struct property) + - sizeof(phb->global_number)); - if (!of_prop) - return NULL; - - if (setup_phb(dev, phb, addr_size_words)) - return NULL; - - add_linux_pci_domain(dev, phb, of_prop); - - return phb; -} - -static struct pci_controller * __devinit alloc_phb_dynamic(struct device_node *dev, unsigned int addr_size_words) -{ - struct pci_controller *phb; - - phb = (struct pci_controller *)kmalloc(sizeof(struct pci_controller), - GFP_KERNEL); - if (phb == NULL) - return NULL; - - if (setup_phb(dev, phb, addr_size_words)) - return NULL; - - phb->is_dynamic = 1; - - /* TODO: linux,pci-domain? */ - - return phb; -} - -unsigned long __init find_and_init_phbs(void) -{ - struct device_node *node; - struct pci_controller *phb; - unsigned int root_size_cells = 0; - unsigned int index; - unsigned int *opprop = NULL; - struct device_node *root = of_find_node_by_path("/"); - - if (ppc64_interrupt_controller == IC_OPEN_PIC) { - opprop = (unsigned int *)get_property(root, - "platform-open-pic", NULL); - } - - root_size_cells = prom_n_size_cells(root); - - index = 0; - - for (node = of_get_next_child(root, NULL); - node != NULL; - node = of_get_next_child(root, node)) { - if (node->type == NULL || strcmp(node->type, "pci") != 0) - continue; - - phb = alloc_phb(node, root_size_cells); - if (!phb) - continue; - - pci_process_bridge_OF_ranges(phb, node, 0); - pci_setup_phb_io(phb, index == 0); -#ifdef CONFIG_PPC_PSERIES - if (ppc64_interrupt_controller == IC_OPEN_PIC && pSeries_mpic) { - int addr = root_size_cells * (index + 2) - 1; - mpic_assign_isu(pSeries_mpic, index, opprop[addr]); - } -#endif - index++; - } - - of_node_put(root); - pci_devs_phb_init(); - - /* - * pci_probe_only and pci_assign_all_buses can be set via properties - * in chosen. - */ - if (of_chosen) { - int *prop; - - prop = (int *)get_property(of_chosen, "linux,pci-probe-only", - NULL); - if (prop) - pci_probe_only = *prop; - - prop = (int *)get_property(of_chosen, - "linux,pci-assign-all-buses", NULL); - if (prop) - pci_assign_all_buses = *prop; - } - - return 0; -} - -struct pci_controller * __devinit init_phb_dynamic(struct device_node *dn) -{ - struct device_node *root = of_find_node_by_path("/"); - unsigned int root_size_cells = 0; - struct pci_controller *phb; - struct pci_bus *bus; - int primary; - - root_size_cells = prom_n_size_cells(root); - - primary = list_empty(&hose_list); - phb = alloc_phb_dynamic(dn, root_size_cells); - if (!phb) - return NULL; - - pci_process_bridge_OF_ranges(phb, dn, primary); - - pci_setup_phb_io_dynamic(phb, primary); - of_node_put(root); - - pci_devs_phb_init_dynamic(phb); - phb->last_busno = 0xff; - bus = pci_scan_bus(phb->first_busno, phb->ops, phb->arch_data); - phb->bus = bus; - phb->last_busno = bus->subordinate; - - return phb; -} -EXPORT_SYMBOL(init_phb_dynamic); - -/* RPA-specific bits for removing PHBs */ -int pcibios_remove_root_bus(struct pci_controller *phb) -{ - struct pci_bus *b = phb->bus; - struct resource *res; - int rc, i; - - res = b->resource[0]; - if (!res->flags) { - printk(KERN_ERR "%s: no IO resource for PHB %s\n", __FUNCTION__, - b->name); - return 1; - } - - rc = unmap_bus_range(b); - if (rc) { - printk(KERN_ERR "%s: failed to unmap IO on bus %s\n", - __FUNCTION__, b->name); - return 1; - } - - if (release_resource(res)) { - printk(KERN_ERR "%s: failed to release IO on bus %s\n", - __FUNCTION__, b->name); - return 1; - } - - for (i = 1; i < 3; ++i) { - res = b->resource[i]; - if (!res->flags && i == 0) { - printk(KERN_ERR "%s: no MEM resource for PHB %s\n", - __FUNCTION__, b->name); - return 1; - } - if (res->flags && release_resource(res)) { - printk(KERN_ERR - "%s: failed to release IO %d on bus %s\n", - __FUNCTION__, i, b->name); - return 1; - } - } - - list_del(&phb->list_node); - if (phb->is_dynamic) - kfree(phb); - - return 0; -} -EXPORT_SYMBOL(pcibios_remove_root_bus); diff --git a/arch/ppc64/kernel/rtc.c b/arch/ppc64/kernel/rtc.c deleted file mode 100644 index 79e7ed2858dd..000000000000 --- a/arch/ppc64/kernel/rtc.c +++ /dev/null @@ -1,358 +0,0 @@ -/* - * Real Time Clock interface for PPC64. - * - * Based on rtc.c by Paul Gortmaker - * - * This driver allows use of the real time clock - * from user space. It exports the /dev/rtc - * interface supporting various ioctl() and also the - * /proc/driver/rtc pseudo-file for status information. - * - * Interface does not support RTC interrupts nor an alarm. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - * 1.0 Mike Corrigan: IBM iSeries rtc support - * 1.1 Dave Engebretsen: IBM pSeries rtc support - */ - -#define RTC_VERSION "1.1" - -#include <linux/config.h> -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/miscdevice.h> -#include <linux/ioport.h> -#include <linux/fcntl.h> -#include <linux/mc146818rtc.h> -#include <linux/init.h> -#include <linux/poll.h> -#include <linux/proc_fs.h> -#include <linux/spinlock.h> -#include <linux/bcd.h> -#include <linux/interrupt.h> -#include <linux/delay.h> - -#include <asm/io.h> -#include <asm/uaccess.h> -#include <asm/system.h> -#include <asm/time.h> -#include <asm/rtas.h> - -#include <asm/machdep.h> - -/* - * We sponge a minor off of the misc major. No need slurping - * up another valuable major dev number for this. If you add - * an ioctl, make sure you don't conflict with SPARC's RTC - * ioctls. - */ - -static ssize_t rtc_read(struct file *file, char __user *buf, - size_t count, loff_t *ppos); - -static int rtc_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg); - -static int rtc_read_proc(char *page, char **start, off_t off, - int count, int *eof, void *data); - -/* - * If this driver ever becomes modularised, it will be really nice - * to make the epoch retain its value across module reload... - */ - -static unsigned long epoch = 1900; /* year corresponding to 0x00 */ - -static const unsigned char days_in_mo[] = -{0, 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31}; - -/* - * Now all the various file operations that we export. - */ - -static ssize_t rtc_read(struct file *file, char __user *buf, - size_t count, loff_t *ppos) -{ - return -EIO; -} - -static int rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd, - unsigned long arg) -{ - struct rtc_time wtime; - - switch (cmd) { - case RTC_RD_TIME: /* Read the time/date from RTC */ - { - memset(&wtime, 0, sizeof(struct rtc_time)); - ppc_md.get_rtc_time(&wtime); - break; - } - case RTC_SET_TIME: /* Set the RTC */ - { - struct rtc_time rtc_tm; - unsigned char mon, day, hrs, min, sec, leap_yr; - unsigned int yrs; - - if (!capable(CAP_SYS_TIME)) - return -EACCES; - - if (copy_from_user(&rtc_tm, (struct rtc_time __user *)arg, - sizeof(struct rtc_time))) - return -EFAULT; - - yrs = rtc_tm.tm_year; - mon = rtc_tm.tm_mon + 1; /* tm_mon starts at zero */ - day = rtc_tm.tm_mday; - hrs = rtc_tm.tm_hour; - min = rtc_tm.tm_min; - sec = rtc_tm.tm_sec; - - if (yrs < 70) - return -EINVAL; - - leap_yr = ((!(yrs % 4) && (yrs % 100)) || !(yrs % 400)); - - if ((mon > 12) || (day == 0)) - return -EINVAL; - - if (day > (days_in_mo[mon] + ((mon == 2) && leap_yr))) - return -EINVAL; - - if ((hrs >= 24) || (min >= 60) || (sec >= 60)) - return -EINVAL; - - if ( yrs > 169 ) - return -EINVAL; - - ppc_md.set_rtc_time(&rtc_tm); - - return 0; - } - case RTC_EPOCH_READ: /* Read the epoch. */ - { - return put_user (epoch, (unsigned long __user *)arg); - } - case RTC_EPOCH_SET: /* Set the epoch. */ - { - /* - * There were no RTC clocks before 1900. - */ - if (arg < 1900) - return -EINVAL; - - if (!capable(CAP_SYS_TIME)) - return -EACCES; - - epoch = arg; - return 0; - } - default: - return -EINVAL; - } - return copy_to_user((void __user *)arg, &wtime, sizeof wtime) ? -EFAULT : 0; -} - -static int rtc_open(struct inode *inode, struct file *file) -{ - nonseekable_open(inode, file); - return 0; -} - -static int rtc_release(struct inode *inode, struct file *file) -{ - return 0; -} - -/* - * The various file operations we support. - */ -static struct file_operations rtc_fops = { - .owner = THIS_MODULE, - .llseek = no_llseek, - .read = rtc_read, - .ioctl = rtc_ioctl, - .open = rtc_open, - .release = rtc_release, -}; - -static struct miscdevice rtc_dev = { - .minor = RTC_MINOR, - .name = "rtc", - .fops = &rtc_fops -}; - -static int __init rtc_init(void) -{ - int retval; - - retval = misc_register(&rtc_dev); - if(retval < 0) - return retval; - -#ifdef CONFIG_PROC_FS - if (create_proc_read_entry("driver/rtc", 0, NULL, rtc_read_proc, NULL) - == NULL) { - misc_deregister(&rtc_dev); - return -ENOMEM; - } -#endif - - printk(KERN_INFO "i/pSeries Real Time Clock Driver v" RTC_VERSION "\n"); - - return 0; -} - -static void __exit rtc_exit (void) -{ - remove_proc_entry ("driver/rtc", NULL); - misc_deregister(&rtc_dev); -} - -module_init(rtc_init); -module_exit(rtc_exit); - -/* - * Info exported via "/proc/driver/rtc". - */ - -static int rtc_proc_output (char *buf) -{ - - char *p; - struct rtc_time tm; - - p = buf; - - ppc_md.get_rtc_time(&tm); - - /* - * There is no way to tell if the luser has the RTC set for local - * time or for Universal Standard Time (GMT). Probably local though. - */ - p += sprintf(p, - "rtc_time\t: %02d:%02d:%02d\n" - "rtc_date\t: %04d-%02d-%02d\n" - "rtc_epoch\t: %04lu\n", - tm.tm_hour, tm.tm_min, tm.tm_sec, - tm.tm_year + 1900, tm.tm_mon + 1, tm.tm_mday, epoch); - - p += sprintf(p, - "DST_enable\t: no\n" - "BCD\t\t: yes\n" - "24hr\t\t: yes\n" ); - - return p - buf; -} - -static int rtc_read_proc(char *page, char **start, off_t off, - int count, int *eof, void *data) -{ - int len = rtc_proc_output (page); - if (len <= off+count) *eof = 1; - *start = page + off; - len -= off; - if (len>count) len = count; - if (len<0) len = 0; - return len; -} - -#ifdef CONFIG_PPC_RTAS -#define MAX_RTC_WAIT 5000 /* 5 sec */ -#define RTAS_CLOCK_BUSY (-2) -unsigned long rtas_get_boot_time(void) -{ - int ret[8]; - int error, wait_time; - unsigned long max_wait_tb; - - max_wait_tb = __get_tb() + tb_ticks_per_usec * 1000 * MAX_RTC_WAIT; - do { - error = rtas_call(rtas_token("get-time-of-day"), 0, 8, ret); - if (error == RTAS_CLOCK_BUSY || rtas_is_extended_busy(error)) { - wait_time = rtas_extended_busy_delay_time(error); - /* This is boot time so we spin. */ - udelay(wait_time*1000); - error = RTAS_CLOCK_BUSY; - } - } while (error == RTAS_CLOCK_BUSY && (__get_tb() < max_wait_tb)); - - if (error != 0 && printk_ratelimit()) { - printk(KERN_WARNING "error: reading the clock failed (%d)\n", - error); - return 0; - } - - return mktime(ret[0], ret[1], ret[2], ret[3], ret[4], ret[5]); -} - -/* NOTE: get_rtc_time will get an error if executed in interrupt context - * and if a delay is needed to read the clock. In this case we just - * silently return without updating rtc_tm. - */ -void rtas_get_rtc_time(struct rtc_time *rtc_tm) -{ - int ret[8]; - int error, wait_time; - unsigned long max_wait_tb; - - max_wait_tb = __get_tb() + tb_ticks_per_usec * 1000 * MAX_RTC_WAIT; - do { - error = rtas_call(rtas_token("get-time-of-day"), 0, 8, ret); - if (error == RTAS_CLOCK_BUSY || rtas_is_extended_busy(error)) { - if (in_interrupt() && printk_ratelimit()) { - printk(KERN_WARNING "error: reading clock would delay interrupt\n"); - return; /* delay not allowed */ - } - wait_time = rtas_extended_busy_delay_time(error); - msleep_interruptible(wait_time); - error = RTAS_CLOCK_BUSY; - } - } while (error == RTAS_CLOCK_BUSY && (__get_tb() < max_wait_tb)); - - if (error != 0 && printk_ratelimit()) { - printk(KERN_WARNING "error: reading the clock failed (%d)\n", - error); - return; - } - - rtc_tm->tm_sec = ret[5]; - rtc_tm->tm_min = ret[4]; - rtc_tm->tm_hour = ret[3]; - rtc_tm->tm_mday = ret[2]; - rtc_tm->tm_mon = ret[1] - 1; - rtc_tm->tm_year = ret[0] - 1900; -} - -int rtas_set_rtc_time(struct rtc_time *tm) -{ - int error, wait_time; - unsigned long max_wait_tb; - - max_wait_tb = __get_tb() + tb_ticks_per_usec * 1000 * MAX_RTC_WAIT; - do { - error = rtas_call(rtas_token("set-time-of-day"), 7, 1, NULL, - tm->tm_year + 1900, tm->tm_mon + 1, - tm->tm_mday, tm->tm_hour, tm->tm_min, - tm->tm_sec, 0); - if (error == RTAS_CLOCK_BUSY || rtas_is_extended_busy(error)) { - if (in_interrupt()) - return 1; /* probably decrementer */ - wait_time = rtas_extended_busy_delay_time(error); - msleep_interruptible(wait_time); - error = RTAS_CLOCK_BUSY; - } - } while (error == RTAS_CLOCK_BUSY && (__get_tb() < max_wait_tb)); - - if (error != 0 && printk_ratelimit()) - printk(KERN_WARNING "error: setting the clock failed (%d)\n", - error); - - return 0; -} -#endif diff --git a/arch/ppc64/kernel/scanlog.c b/arch/ppc64/kernel/scanlog.c deleted file mode 100644 index 215bf8900304..000000000000 --- a/arch/ppc64/kernel/scanlog.c +++ /dev/null @@ -1,236 +0,0 @@ -/* - * c 2001 PPC 64 Team, IBM Corp - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - * scan-log-data driver for PPC64 Todd Inglett <tinglett@vnet.ibm.com> - * - * When ppc64 hardware fails the service processor dumps internal state - * of the system. After a reboot the operating system can access a dump - * of this data using this driver. A dump exists if the device-tree - * /chosen/ibm,scan-log-data property exists. - * - * This driver exports /proc/ppc64/scan-log-dump which can be read. - * The driver supports only sequential reads. - * - * The driver looks at a write to the driver for the single word "reset". - * If given, the driver will reset the scanlog so the platform can free it. - */ - -#include <linux/module.h> -#include <linux/types.h> -#include <linux/errno.h> -#include <linux/proc_fs.h> -#include <linux/init.h> -#include <linux/delay.h> -#include <asm/uaccess.h> -#include <asm/rtas.h> -#include <asm/prom.h> - -#define MODULE_VERS "1.0" -#define MODULE_NAME "scanlog" - -/* Status returns from ibm,scan-log-dump */ -#define SCANLOG_COMPLETE 0 -#define SCANLOG_HWERROR -1 -#define SCANLOG_CONTINUE 1 - -#define DEBUG(A...) do { if (scanlog_debug) printk(KERN_ERR "scanlog: " A); } while (0) - -static int scanlog_debug; -static unsigned int ibm_scan_log_dump; /* RTAS token */ -static struct proc_dir_entry *proc_ppc64_scan_log_dump; /* The proc file */ - -static ssize_t scanlog_read(struct file *file, char __user *buf, - size_t count, loff_t *ppos) -{ - struct inode * inode = file->f_dentry->d_inode; - struct proc_dir_entry *dp; - unsigned int *data; - int status; - unsigned long len, off; - unsigned int wait_time; - - dp = PDE(inode); - data = (unsigned int *)dp->data; - - if (!data) { - printk(KERN_ERR "scanlog: read failed no data\n"); - return -EIO; - } - - if (count > RTAS_DATA_BUF_SIZE) - count = RTAS_DATA_BUF_SIZE; - - if (count < 1024) { - /* This is the min supported by this RTAS call. Rather - * than do all the buffering we insist the user code handle - * larger reads. As long as cp works... :) - */ - printk(KERN_ERR "scanlog: cannot perform a small read (%ld)\n", count); - return -EINVAL; - } - - if (!access_ok(VERIFY_WRITE, buf, count)) - return -EFAULT; - - for (;;) { - wait_time = 500; /* default wait if no data */ - spin_lock(&rtas_data_buf_lock); - memcpy(rtas_data_buf, data, RTAS_DATA_BUF_SIZE); - status = rtas_call(ibm_scan_log_dump, 2, 1, NULL, - (u32) __pa(rtas_data_buf), (u32) count); - memcpy(data, rtas_data_buf, RTAS_DATA_BUF_SIZE); - spin_unlock(&rtas_data_buf_lock); - - DEBUG("status=%d, data[0]=%x, data[1]=%x, data[2]=%x\n", - status, data[0], data[1], data[2]); - switch (status) { - case SCANLOG_COMPLETE: - DEBUG("hit eof\n"); - return 0; - case SCANLOG_HWERROR: - DEBUG("hardware error reading scan log data\n"); - return -EIO; - case SCANLOG_CONTINUE: - /* We may or may not have data yet */ - len = data[1]; - off = data[2]; - if (len > 0) { - if (copy_to_user(buf, ((char *)data)+off, len)) - return -EFAULT; - return len; - } - /* Break to sleep default time */ - break; - default: - if (status > 9900 && status <= 9905) { - wait_time = rtas_extended_busy_delay_time(status); - } else { - printk(KERN_ERR "scanlog: unknown error from rtas: %d\n", status); - return -EIO; - } - } - /* Apparently no data yet. Wait and try again. */ - msleep_interruptible(wait_time); - } - /*NOTREACHED*/ -} - -static ssize_t scanlog_write(struct file * file, const char __user * buf, - size_t count, loff_t *ppos) -{ - char stkbuf[20]; - int status; - - if (count > 19) count = 19; - if (copy_from_user (stkbuf, buf, count)) { - return -EFAULT; - } - stkbuf[count] = 0; - - if (buf) { - if (strncmp(stkbuf, "reset", 5) == 0) { - DEBUG("reset scanlog\n"); - status = rtas_call(ibm_scan_log_dump, 2, 1, NULL, 0, 0); - DEBUG("rtas returns %d\n", status); - } else if (strncmp(stkbuf, "debugon", 7) == 0) { - printk(KERN_ERR "scanlog: debug on\n"); - scanlog_debug = 1; - } else if (strncmp(stkbuf, "debugoff", 8) == 0) { - printk(KERN_ERR "scanlog: debug off\n"); - scanlog_debug = 0; - } - } - return count; -} - -static int scanlog_open(struct inode * inode, struct file * file) -{ - struct proc_dir_entry *dp = PDE(inode); - unsigned int *data = (unsigned int *)dp->data; - - if (!data) { - printk(KERN_ERR "scanlog: open failed no data\n"); - return -EIO; - } - - if (data[0] != 0) { - /* This imperfect test stops a second copy of the - * data (or a reset while data is being copied) - */ - return -EBUSY; - } - - data[0] = 0; /* re-init so we restart the scan */ - - return 0; -} - -static int scanlog_release(struct inode * inode, struct file * file) -{ - struct proc_dir_entry *dp = PDE(inode); - unsigned int *data = (unsigned int *)dp->data; - - if (!data) { - printk(KERN_ERR "scanlog: release failed no data\n"); - return -EIO; - } - data[0] = 0; - - return 0; -} - -struct file_operations scanlog_fops = { - .owner = THIS_MODULE, - .read = scanlog_read, - .write = scanlog_write, - .open = scanlog_open, - .release = scanlog_release, -}; - -int __init scanlog_init(void) -{ - struct proc_dir_entry *ent; - - ibm_scan_log_dump = rtas_token("ibm,scan-log-dump"); - if (ibm_scan_log_dump == RTAS_UNKNOWN_SERVICE) { - printk(KERN_ERR "scan-log-dump not implemented on this system\n"); - return -EIO; - } - - ent = create_proc_entry("ppc64/rtas/scan-log-dump", S_IRUSR, NULL); - if (ent) { - ent->proc_fops = &scanlog_fops; - /* Ideally we could allocate a buffer < 4G */ - ent->data = kmalloc(RTAS_DATA_BUF_SIZE, GFP_KERNEL); - if (!ent->data) { - printk(KERN_ERR "Failed to allocate a buffer\n"); - remove_proc_entry("scan-log-dump", ent->parent); - return -ENOMEM; - } - ((unsigned int *)ent->data)[0] = 0; - } else { - printk(KERN_ERR "Failed to create ppc64/scan-log-dump proc entry\n"); - return -EIO; - } - proc_ppc64_scan_log_dump = ent; - - return 0; -} - -void __exit scanlog_cleanup(void) -{ - if (proc_ppc64_scan_log_dump) { - if (proc_ppc64_scan_log_dump->data) - kfree(proc_ppc64_scan_log_dump->data); - remove_proc_entry("scan-log-dump", proc_ppc64_scan_log_dump->parent); - } -} - -module_init(scanlog_init); -module_exit(scanlog_cleanup); -MODULE_LICENSE("GPL"); diff --git a/arch/ppc64/kernel/semaphore.c b/arch/ppc64/kernel/semaphore.c deleted file mode 100644 index a1c1db573e9c..000000000000 --- a/arch/ppc64/kernel/semaphore.c +++ /dev/null @@ -1,136 +0,0 @@ -/* - * - * - * PowerPC-specific semaphore code. - * - * Copyright (C) 1999 Cort Dougan <cort@cs.nmt.edu> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - * April 2001 - Reworked by Paul Mackerras <paulus@samba.org> - * to eliminate the SMP races in the old version between the updates - * of `count' and `waking'. Now we use negative `count' values to - * indicate that some process(es) are waiting for the semaphore. - */ - -#include <linux/sched.h> -#include <linux/init.h> -#include <linux/module.h> - -#include <asm/atomic.h> -#include <asm/semaphore.h> -#include <asm/errno.h> - -/* - * Atomically update sem->count. - * This does the equivalent of the following: - * - * old_count = sem->count; - * tmp = MAX(old_count, 0) + incr; - * sem->count = tmp; - * return old_count; - */ -static inline int __sem_update_count(struct semaphore *sem, int incr) -{ - int old_count, tmp; - - __asm__ __volatile__("\n" -"1: lwarx %0,0,%3\n" -" srawi %1,%0,31\n" -" andc %1,%0,%1\n" -" add %1,%1,%4\n" -" stwcx. %1,0,%3\n" -" bne 1b" - : "=&r" (old_count), "=&r" (tmp), "=m" (sem->count) - : "r" (&sem->count), "r" (incr), "m" (sem->count) - : "cc"); - - return old_count; -} - -void __up(struct semaphore *sem) -{ - /* - * Note that we incremented count in up() before we came here, - * but that was ineffective since the result was <= 0, and - * any negative value of count is equivalent to 0. - * This ends up setting count to 1, unless count is now > 0 - * (i.e. because some other cpu has called up() in the meantime), - * in which case we just increment count. - */ - __sem_update_count(sem, 1); - wake_up(&sem->wait); -} -EXPORT_SYMBOL(__up); - -/* - * Note that when we come in to __down or __down_interruptible, - * we have already decremented count, but that decrement was - * ineffective since the result was < 0, and any negative value - * of count is equivalent to 0. - * Thus it is only when we decrement count from some value > 0 - * that we have actually got the semaphore. - */ -void __sched __down(struct semaphore *sem) -{ - struct task_struct *tsk = current; - DECLARE_WAITQUEUE(wait, tsk); - - __set_task_state(tsk, TASK_UNINTERRUPTIBLE); - add_wait_queue_exclusive(&sem->wait, &wait); - - /* - * Try to get the semaphore. If the count is > 0, then we've - * got the semaphore; we decrement count and exit the loop. - * If the count is 0 or negative, we set it to -1, indicating - * that we are asleep, and then sleep. - */ - while (__sem_update_count(sem, -1) <= 0) { - schedule(); - set_task_state(tsk, TASK_UNINTERRUPTIBLE); - } - remove_wait_queue(&sem->wait, &wait); - __set_task_state(tsk, TASK_RUNNING); - - /* - * If there are any more sleepers, wake one of them up so - * that it can either get the semaphore, or set count to -1 - * indicating that there are still processes sleeping. - */ - wake_up(&sem->wait); -} -EXPORT_SYMBOL(__down); - -int __sched __down_interruptible(struct semaphore * sem) -{ - int retval = 0; - struct task_struct *tsk = current; - DECLARE_WAITQUEUE(wait, tsk); - - __set_task_state(tsk, TASK_INTERRUPTIBLE); - add_wait_queue_exclusive(&sem->wait, &wait); - - while (__sem_update_count(sem, -1) <= 0) { - if (signal_pending(current)) { - /* - * A signal is pending - give up trying. - * Set sem->count to 0 if it is negative, - * since we are no longer sleeping. - */ - __sem_update_count(sem, 0); - retval = -EINTR; - break; - } - schedule(); - set_task_state(tsk, TASK_INTERRUPTIBLE); - } - remove_wait_queue(&sem->wait, &wait); - __set_task_state(tsk, TASK_RUNNING); - - wake_up(&sem->wait); - return retval; -} -EXPORT_SYMBOL(__down_interruptible); diff --git a/arch/ppc64/kernel/sysfs.c b/arch/ppc64/kernel/sysfs.c deleted file mode 100644 index 6654b350979c..000000000000 --- a/arch/ppc64/kernel/sysfs.c +++ /dev/null @@ -1,383 +0,0 @@ -#include <linux/config.h> -#include <linux/sysdev.h> -#include <linux/cpu.h> -#include <linux/smp.h> -#include <linux/percpu.h> -#include <linux/init.h> -#include <linux/sched.h> -#include <linux/module.h> -#include <linux/nodemask.h> -#include <linux/cpumask.h> -#include <linux/notifier.h> - -#include <asm/current.h> -#include <asm/processor.h> -#include <asm/cputable.h> -#include <asm/firmware.h> -#include <asm/hvcall.h> -#include <asm/prom.h> -#include <asm/systemcfg.h> -#include <asm/paca.h> -#include <asm/lppaca.h> -#include <asm/machdep.h> - -static DEFINE_PER_CPU(struct cpu, cpu_devices); - -/* SMT stuff */ - -#ifdef CONFIG_PPC_MULTIPLATFORM -/* default to snooze disabled */ -DEFINE_PER_CPU(unsigned long, smt_snooze_delay); - -static ssize_t store_smt_snooze_delay(struct sys_device *dev, const char *buf, - size_t count) -{ - struct cpu *cpu = container_of(dev, struct cpu, sysdev); - ssize_t ret; - unsigned long snooze; - - ret = sscanf(buf, "%lu", &snooze); - if (ret != 1) - return -EINVAL; - - per_cpu(smt_snooze_delay, cpu->sysdev.id) = snooze; - - return count; -} - -static ssize_t show_smt_snooze_delay(struct sys_device *dev, char *buf) -{ - struct cpu *cpu = container_of(dev, struct cpu, sysdev); - - return sprintf(buf, "%lu\n", per_cpu(smt_snooze_delay, cpu->sysdev.id)); -} - -static SYSDEV_ATTR(smt_snooze_delay, 0644, show_smt_snooze_delay, - store_smt_snooze_delay); - -/* Only parse OF options if the matching cmdline option was not specified */ -static int smt_snooze_cmdline; - -static int __init smt_setup(void) -{ - struct device_node *options; - unsigned int *val; - unsigned int cpu; - - if (!cpu_has_feature(CPU_FTR_SMT)) - return 1; - - options = find_path_device("/options"); - if (!options) - return 1; - - val = (unsigned int *)get_property(options, "ibm,smt-snooze-delay", - NULL); - if (!smt_snooze_cmdline && val) { - for_each_cpu(cpu) - per_cpu(smt_snooze_delay, cpu) = *val; - } - - return 1; -} -__initcall(smt_setup); - -static int __init setup_smt_snooze_delay(char *str) -{ - unsigned int cpu; - int snooze; - - if (!cpu_has_feature(CPU_FTR_SMT)) - return 1; - - smt_snooze_cmdline = 1; - - if (get_option(&str, &snooze)) { - for_each_cpu(cpu) - per_cpu(smt_snooze_delay, cpu) = snooze; - } - - return 1; -} -__setup("smt-snooze-delay=", setup_smt_snooze_delay); - -#endif /* CONFIG_PPC_MULTIPLATFORM */ - -/* - * Enabling PMCs will slow partition context switch times so we only do - * it the first time we write to the PMCs. - */ - -static DEFINE_PER_CPU(char, pmcs_enabled); - -void ppc64_enable_pmcs(void) -{ - /* Only need to enable them once */ - if (__get_cpu_var(pmcs_enabled)) - return; - - __get_cpu_var(pmcs_enabled) = 1; - - if (ppc_md.enable_pmcs) - ppc_md.enable_pmcs(); -} -EXPORT_SYMBOL(ppc64_enable_pmcs); - -/* XXX convert to rusty's on_one_cpu */ -static unsigned long run_on_cpu(unsigned long cpu, - unsigned long (*func)(unsigned long), - unsigned long arg) -{ - cpumask_t old_affinity = current->cpus_allowed; - unsigned long ret; - - /* should return -EINVAL to userspace */ - if (set_cpus_allowed(current, cpumask_of_cpu(cpu))) - return 0; - - ret = func(arg); - - set_cpus_allowed(current, old_affinity); - - return ret; -} - -#define SYSFS_PMCSETUP(NAME, ADDRESS) \ -static unsigned long read_##NAME(unsigned long junk) \ -{ \ - return mfspr(ADDRESS); \ -} \ -static unsigned long write_##NAME(unsigned long val) \ -{ \ - ppc64_enable_pmcs(); \ - mtspr(ADDRESS, val); \ - return 0; \ -} \ -static ssize_t show_##NAME(struct sys_device *dev, char *buf) \ -{ \ - struct cpu *cpu = container_of(dev, struct cpu, sysdev); \ - unsigned long val = run_on_cpu(cpu->sysdev.id, read_##NAME, 0); \ - return sprintf(buf, "%lx\n", val); \ -} \ -static ssize_t __attribute_used__ \ - store_##NAME(struct sys_device *dev, const char *buf, size_t count) \ -{ \ - struct cpu *cpu = container_of(dev, struct cpu, sysdev); \ - unsigned long val; \ - int ret = sscanf(buf, "%lx", &val); \ - if (ret != 1) \ - return -EINVAL; \ - run_on_cpu(cpu->sysdev.id, write_##NAME, val); \ - return count; \ -} - -SYSFS_PMCSETUP(mmcr0, SPRN_MMCR0); -SYSFS_PMCSETUP(mmcr1, SPRN_MMCR1); -SYSFS_PMCSETUP(mmcra, SPRN_MMCRA); -SYSFS_PMCSETUP(pmc1, SPRN_PMC1); -SYSFS_PMCSETUP(pmc2, SPRN_PMC2); -SYSFS_PMCSETUP(pmc3, SPRN_PMC3); -SYSFS_PMCSETUP(pmc4, SPRN_PMC4); -SYSFS_PMCSETUP(pmc5, SPRN_PMC5); -SYSFS_PMCSETUP(pmc6, SPRN_PMC6); -SYSFS_PMCSETUP(pmc7, SPRN_PMC7); -SYSFS_PMCSETUP(pmc8, SPRN_PMC8); -SYSFS_PMCSETUP(purr, SPRN_PURR); - -static SYSDEV_ATTR(mmcr0, 0600, show_mmcr0, store_mmcr0); -static SYSDEV_ATTR(mmcr1, 0600, show_mmcr1, store_mmcr1); -static SYSDEV_ATTR(mmcra, 0600, show_mmcra, store_mmcra); -static SYSDEV_ATTR(pmc1, 0600, show_pmc1, store_pmc1); -static SYSDEV_ATTR(pmc2, 0600, show_pmc2, store_pmc2); -static SYSDEV_ATTR(pmc3, 0600, show_pmc3, store_pmc3); -static SYSDEV_ATTR(pmc4, 0600, show_pmc4, store_pmc4); -static SYSDEV_ATTR(pmc5, 0600, show_pmc5, store_pmc5); -static SYSDEV_ATTR(pmc6, 0600, show_pmc6, store_pmc6); -static SYSDEV_ATTR(pmc7, 0600, show_pmc7, store_pmc7); -static SYSDEV_ATTR(pmc8, 0600, show_pmc8, store_pmc8); -static SYSDEV_ATTR(purr, 0600, show_purr, NULL); - -static void register_cpu_online(unsigned int cpu) -{ - struct cpu *c = &per_cpu(cpu_devices, cpu); - struct sys_device *s = &c->sysdev; - -#ifndef CONFIG_PPC_ISERIES - if (cpu_has_feature(CPU_FTR_SMT)) - sysdev_create_file(s, &attr_smt_snooze_delay); -#endif - - /* PMC stuff */ - - sysdev_create_file(s, &attr_mmcr0); - sysdev_create_file(s, &attr_mmcr1); - - if (cpu_has_feature(CPU_FTR_MMCRA)) - sysdev_create_file(s, &attr_mmcra); - - if (cur_cpu_spec->num_pmcs >= 1) - sysdev_create_file(s, &attr_pmc1); - if (cur_cpu_spec->num_pmcs >= 2) - sysdev_create_file(s, &attr_pmc2); - if (cur_cpu_spec->num_pmcs >= 3) - sysdev_create_file(s, &attr_pmc3); - if (cur_cpu_spec->num_pmcs >= 4) - sysdev_create_file(s, &attr_pmc4); - if (cur_cpu_spec->num_pmcs >= 5) - sysdev_create_file(s, &attr_pmc5); - if (cur_cpu_spec->num_pmcs >= 6) - sysdev_create_file(s, &attr_pmc6); - if (cur_cpu_spec->num_pmcs >= 7) - sysdev_create_file(s, &attr_pmc7); - if (cur_cpu_spec->num_pmcs >= 8) - sysdev_create_file(s, &attr_pmc8); - - if (cpu_has_feature(CPU_FTR_SMT)) - sysdev_create_file(s, &attr_purr); -} - -#ifdef CONFIG_HOTPLUG_CPU -static void unregister_cpu_online(unsigned int cpu) -{ - struct cpu *c = &per_cpu(cpu_devices, cpu); - struct sys_device *s = &c->sysdev; - - BUG_ON(c->no_control); - -#ifndef CONFIG_PPC_ISERIES - if (cpu_has_feature(CPU_FTR_SMT)) - sysdev_remove_file(s, &attr_smt_snooze_delay); -#endif - - /* PMC stuff */ - - sysdev_remove_file(s, &attr_mmcr0); - sysdev_remove_file(s, &attr_mmcr1); - - if (cpu_has_feature(CPU_FTR_MMCRA)) - sysdev_remove_file(s, &attr_mmcra); - - if (cur_cpu_spec->num_pmcs >= 1) - sysdev_remove_file(s, &attr_pmc1); - if (cur_cpu_spec->num_pmcs >= 2) - sysdev_remove_file(s, &attr_pmc2); - if (cur_cpu_spec->num_pmcs >= 3) - sysdev_remove_file(s, &attr_pmc3); - if (cur_cpu_spec->num_pmcs >= 4) - sysdev_remove_file(s, &attr_pmc4); - if (cur_cpu_spec->num_pmcs >= 5) - sysdev_remove_file(s, &attr_pmc5); - if (cur_cpu_spec->num_pmcs >= 6) - sysdev_remove_file(s, &attr_pmc6); - if (cur_cpu_spec->num_pmcs >= 7) - sysdev_remove_file(s, &attr_pmc7); - if (cur_cpu_spec->num_pmcs >= 8) - sysdev_remove_file(s, &attr_pmc8); - - if (cpu_has_feature(CPU_FTR_SMT)) - sysdev_remove_file(s, &attr_purr); -} -#endif /* CONFIG_HOTPLUG_CPU */ - -static int __devinit sysfs_cpu_notify(struct notifier_block *self, - unsigned long action, void *hcpu) -{ - unsigned int cpu = (unsigned int)(long)hcpu; - - switch (action) { - case CPU_ONLINE: - register_cpu_online(cpu); - break; -#ifdef CONFIG_HOTPLUG_CPU - case CPU_DEAD: - unregister_cpu_online(cpu); - break; -#endif - } - return NOTIFY_OK; -} - -static struct notifier_block __devinitdata sysfs_cpu_nb = { - .notifier_call = sysfs_cpu_notify, -}; - -/* NUMA stuff */ - -#ifdef CONFIG_NUMA -static struct node node_devices[MAX_NUMNODES]; - -static void register_nodes(void) -{ - int i; - - for (i = 0; i < MAX_NUMNODES; i++) { - if (node_online(i)) { - int p_node = parent_node(i); - struct node *parent = NULL; - - if (p_node != i) - parent = &node_devices[p_node]; - - register_node(&node_devices[i], i, parent); - } - } -} -#else -static void register_nodes(void) -{ - return; -} -#endif - -/* Only valid if CPU is present. */ -static ssize_t show_physical_id(struct sys_device *dev, char *buf) -{ - struct cpu *cpu = container_of(dev, struct cpu, sysdev); - - return sprintf(buf, "%d\n", get_hard_smp_processor_id(cpu->sysdev.id)); -} -static SYSDEV_ATTR(physical_id, 0444, show_physical_id, NULL); - -static int __init topology_init(void) -{ - int cpu; - struct node *parent = NULL; - - register_nodes(); - - register_cpu_notifier(&sysfs_cpu_nb); - - for_each_cpu(cpu) { - struct cpu *c = &per_cpu(cpu_devices, cpu); - -#ifdef CONFIG_NUMA - /* The node to which a cpu belongs can't be known - * until the cpu is made present. - */ - parent = NULL; - if (cpu_present(cpu)) - parent = &node_devices[cpu_to_node(cpu)]; -#endif - /* - * For now, we just see if the system supports making - * the RTAS calls for CPU hotplug. But, there may be a - * more comprehensive way to do this for an individual - * CPU. For instance, the boot cpu might never be valid - * for hotplugging. - */ - if (!ppc_md.cpu_die) - c->no_control = 1; - - if (cpu_online(cpu) || (c->no_control == 0)) { - register_cpu(c, cpu, parent); - - sysdev_create_file(&c->sysdev, &attr_physical_id); - } - - if (cpu_online(cpu)) - register_cpu_online(cpu); - } - - return 0; -} -__initcall(topology_init); diff --git a/arch/ppc64/kernel/udbg.c b/arch/ppc64/kernel/udbg.c deleted file mode 100644 index d49c3613c8ec..000000000000 --- a/arch/ppc64/kernel/udbg.c +++ /dev/null @@ -1,180 +0,0 @@ -/* - * polling mode stateless debugging stuff, originally for NS16550 Serial Ports - * - * c 2001 PPC 64 Team, IBM Corp - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include <stdarg.h> -#define WANT_PPCDBG_TAB /* Only defined here */ -#include <linux/config.h> -#include <linux/types.h> -#include <linux/sched.h> -#include <linux/console.h> -#include <asm/ppcdebug.h> -#include <asm/processor.h> - -void (*udbg_putc)(unsigned char c); -unsigned char (*udbg_getc)(void); -int (*udbg_getc_poll)(void); - -/* udbg library, used by xmon et al */ -void udbg_puts(const char *s) -{ - if (udbg_putc) { - char c; - - if (s && *s != '\0') { - while ((c = *s++) != '\0') - udbg_putc(c); - } - } -#if 0 - else { - printk("%s", s); - } -#endif -} - -int udbg_write(const char *s, int n) -{ - int remain = n; - char c; - - if (!udbg_putc) - return 0; - - if (s && *s != '\0') { - while (((c = *s++) != '\0') && (remain-- > 0)) { - udbg_putc(c); - } - } - - return n - remain; -} - -int udbg_read(char *buf, int buflen) -{ - char c, *p = buf; - int i; - - if (!udbg_getc) - return 0; - - for (i = 0; i < buflen; ++i) { - do { - c = udbg_getc(); - } while (c == 0x11 || c == 0x13); - if (c == 0) - break; - *p++ = c; - } - - return i; -} - -#define UDBG_BUFSIZE 256 -void udbg_printf(const char *fmt, ...) -{ - unsigned char buf[UDBG_BUFSIZE]; - va_list args; - - va_start(args, fmt); - vsnprintf(buf, UDBG_BUFSIZE, fmt, args); - udbg_puts(buf); - va_end(args); -} - -/* PPCDBG stuff */ - -u64 ppc64_debug_switch; - -/* Special print used by PPCDBG() macro */ -void udbg_ppcdbg(unsigned long debug_flags, const char *fmt, ...) -{ - unsigned long active_debugs = debug_flags & ppc64_debug_switch; - - if (active_debugs) { - va_list ap; - unsigned char buf[UDBG_BUFSIZE]; - unsigned long i, len = 0; - - for (i=0; i < PPCDBG_NUM_FLAGS; i++) { - if (((1U << i) & active_debugs) && - trace_names[i]) { - len += strlen(trace_names[i]); - udbg_puts(trace_names[i]); - break; - } - } - - snprintf(buf, UDBG_BUFSIZE, " [%s]: ", current->comm); - len += strlen(buf); - udbg_puts(buf); - - while (len < 18) { - udbg_puts(" "); - len++; - } - - va_start(ap, fmt); - vsnprintf(buf, UDBG_BUFSIZE, fmt, ap); - udbg_puts(buf); - va_end(ap); - } -} - -unsigned long udbg_ifdebug(unsigned long flags) -{ - return (flags & ppc64_debug_switch); -} - -/* - * Initialize the PPCDBG state. Called before relocation has been enabled. - */ -void __init ppcdbg_initialize(void) -{ - ppc64_debug_switch = PPC_DEBUG_DEFAULT; /* | PPCDBG_BUSWALK | */ - /* PPCDBG_PHBINIT | PPCDBG_MM | PPCDBG_MMINIT | PPCDBG_TCEINIT | PPCDBG_TCE */; -} - -/* - * Early boot console based on udbg - */ -static void udbg_console_write(struct console *con, const char *s, - unsigned int n) -{ - udbg_write(s, n); -} - -static struct console udbg_console = { - .name = "udbg", - .write = udbg_console_write, - .flags = CON_PRINTBUFFER, - .index = -1, -}; - -static int early_console_initialized; - -void __init disable_early_printk(void) -{ - if (!early_console_initialized) - return; - unregister_console(&udbg_console); - early_console_initialized = 0; -} - -/* called by setup_system */ -void register_early_udbg_console(void) -{ - early_console_initialized = 1; - register_console(&udbg_console); -} - -#if 0 /* if you want to use this as a regular output console */ -console_initcall(register_udbg_console); -#endif diff --git a/arch/ppc64/kernel/udbg_16550.c b/arch/ppc64/kernel/udbg_16550.c deleted file mode 100644 index 9313574ab935..000000000000 --- a/arch/ppc64/kernel/udbg_16550.c +++ /dev/null @@ -1,123 +0,0 @@ -/* - * udbg for for NS16550 compatable serial ports - * - * Copyright (C) 2001-2005 PPC 64 Team, IBM Corp - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#include <linux/config.h> -#include <linux/types.h> -#include <asm/udbg.h> -#include <asm/io.h> - -extern u8 real_readb(volatile u8 __iomem *addr); -extern void real_writeb(u8 data, volatile u8 __iomem *addr); - -struct NS16550 { - /* this struct must be packed */ - unsigned char rbr; /* 0 */ - unsigned char ier; /* 1 */ - unsigned char fcr; /* 2 */ - unsigned char lcr; /* 3 */ - unsigned char mcr; /* 4 */ - unsigned char lsr; /* 5 */ - unsigned char msr; /* 6 */ - unsigned char scr; /* 7 */ -}; - -#define thr rbr -#define iir fcr -#define dll rbr -#define dlm ier -#define dlab lcr - -#define LSR_DR 0x01 /* Data ready */ -#define LSR_OE 0x02 /* Overrun */ -#define LSR_PE 0x04 /* Parity error */ -#define LSR_FE 0x08 /* Framing error */ -#define LSR_BI 0x10 /* Break */ -#define LSR_THRE 0x20 /* Xmit holding register empty */ -#define LSR_TEMT 0x40 /* Xmitter empty */ -#define LSR_ERR 0x80 /* Error */ - -static volatile struct NS16550 __iomem *udbg_comport; - -static void udbg_550_putc(unsigned char c) -{ - if (udbg_comport) { - while ((in_8(&udbg_comport->lsr) & LSR_THRE) == 0) - /* wait for idle */; - out_8(&udbg_comport->thr, c); - if (c == '\n') - udbg_550_putc('\r'); - } -} - -static int udbg_550_getc_poll(void) -{ - if (udbg_comport) { - if ((in_8(&udbg_comport->lsr) & LSR_DR) != 0) - return in_8(&udbg_comport->rbr); - else - return -1; - } - return -1; -} - -static unsigned char udbg_550_getc(void) -{ - if (udbg_comport) { - while ((in_8(&udbg_comport->lsr) & LSR_DR) == 0) - /* wait for char */; - return in_8(&udbg_comport->rbr); - } - return 0; -} - -void udbg_init_uart(void __iomem *comport, unsigned int speed) -{ - u16 dll = speed ? (115200 / speed) : 12; - - if (comport) { - udbg_comport = (struct NS16550 __iomem *)comport; - out_8(&udbg_comport->lcr, 0x00); - out_8(&udbg_comport->ier, 0xff); - out_8(&udbg_comport->ier, 0x00); - out_8(&udbg_comport->lcr, 0x80); /* Access baud rate */ - out_8(&udbg_comport->dll, dll & 0xff); /* 1 = 115200, 2 = 57600, - 3 = 38400, 12 = 9600 baud */ - out_8(&udbg_comport->dlm, dll >> 8); /* dll >> 8 which should be zero - for fast rates; */ - out_8(&udbg_comport->lcr, 0x03); /* 8 data, 1 stop, no parity */ - out_8(&udbg_comport->mcr, 0x03); /* RTS/DTR */ - out_8(&udbg_comport->fcr ,0x07); /* Clear & enable FIFOs */ - udbg_putc = udbg_550_putc; - udbg_getc = udbg_550_getc; - udbg_getc_poll = udbg_550_getc_poll; - } -} - -#ifdef CONFIG_PPC_MAPLE -void udbg_maple_real_putc(unsigned char c) -{ - if (udbg_comport) { - while ((real_readb(&udbg_comport->lsr) & LSR_THRE) == 0) - /* wait for idle */; - real_writeb(c, &udbg_comport->thr); eieio(); - if (c == '\n') - udbg_maple_real_putc('\r'); - } -} - -void udbg_init_maple_realmode(void) -{ - udbg_comport = (volatile struct NS16550 __iomem *)0xf40003f8; - - udbg_putc = udbg_maple_real_putc; - udbg_getc = NULL; - udbg_getc_poll = NULL; -} -#endif /* CONFIG_PPC_MAPLE */ diff --git a/arch/ppc64/kernel/udbg_scc.c b/arch/ppc64/kernel/udbg_scc.c deleted file mode 100644 index 820c53551507..000000000000 --- a/arch/ppc64/kernel/udbg_scc.c +++ /dev/null @@ -1,135 +0,0 @@ -/* - * udbg for for zilog scc ports as found on Apple PowerMacs - * - * Copyright (C) 2001-2005 PPC 64 Team, IBM Corp - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#include <linux/config.h> -#include <linux/types.h> -#include <asm/udbg.h> -#include <asm/processor.h> -#include <asm/io.h> -#include <asm/prom.h> -#include <asm/pmac_feature.h> - -extern u8 real_readb(volatile u8 __iomem *addr); -extern void real_writeb(u8 data, volatile u8 __iomem *addr); - -#define SCC_TXRDY 4 -#define SCC_RXRDY 1 - -static volatile u8 __iomem *sccc; -static volatile u8 __iomem *sccd; - -static void udbg_scc_putc(unsigned char c) -{ - if (sccc) { - while ((in_8(sccc) & SCC_TXRDY) == 0) - ; - out_8(sccd, c); - if (c == '\n') - udbg_scc_putc('\r'); - } -} - -static int udbg_scc_getc_poll(void) -{ - if (sccc) { - if ((in_8(sccc) & SCC_RXRDY) != 0) - return in_8(sccd); - else - return -1; - } - return -1; -} - -static unsigned char udbg_scc_getc(void) -{ - if (sccc) { - while ((in_8(sccc) & SCC_RXRDY) == 0) - ; - return in_8(sccd); - } - return 0; -} - -static unsigned char scc_inittab[] = { - 13, 0, /* set baud rate divisor */ - 12, 0, - 14, 1, /* baud rate gen enable, src=rtxc */ - 11, 0x50, /* clocks = br gen */ - 5, 0xea, /* tx 8 bits, assert DTR & RTS */ - 4, 0x46, /* x16 clock, 1 stop */ - 3, 0xc1, /* rx enable, 8 bits */ -}; - -void udbg_init_scc(struct device_node *np) -{ - u32 *reg; - unsigned long addr; - int i, x; - - if (np == NULL) - np = of_find_node_by_name(NULL, "escc"); - if (np == NULL || np->parent == NULL) - return; - - udbg_printf("found SCC...\n"); - /* Get address within mac-io ASIC */ - reg = (u32 *)get_property(np, "reg", NULL); - if (reg == NULL) - return; - addr = reg[0]; - udbg_printf("local addr: %lx\n", addr); - /* Get address of mac-io PCI itself */ - reg = (u32 *)get_property(np->parent, "assigned-addresses", NULL); - if (reg == NULL) - return; - addr += reg[2]; - udbg_printf("final addr: %lx\n", addr); - - /* Setup for 57600 8N1 */ - addr += 0x20; - sccc = (volatile u8 * __iomem) ioremap(addr & PAGE_MASK, PAGE_SIZE) ; - sccc += addr & ~PAGE_MASK; - sccd = sccc + 0x10; - - udbg_printf("ioremap result sccc: %p\n", sccc); - mb(); - - for (i = 20000; i != 0; --i) - x = in_8(sccc); - out_8(sccc, 0x09); /* reset A or B side */ - out_8(sccc, 0xc0); - for (i = 0; i < sizeof(scc_inittab); ++i) - out_8(sccc, scc_inittab[i]); - - udbg_putc = udbg_scc_putc; - udbg_getc = udbg_scc_getc; - udbg_getc_poll = udbg_scc_getc_poll; - - udbg_puts("Hello World !\n"); -} - -static void udbg_real_scc_putc(unsigned char c) -{ - while ((real_readb(sccc) & SCC_TXRDY) == 0) - ; - real_writeb(c, sccd); - if (c == '\n') - udbg_real_scc_putc('\r'); -} - -void udbg_init_pmac_realmode(void) -{ - sccc = (volatile u8 __iomem *)0x80013020ul; - sccd = (volatile u8 __iomem *)0x80013030ul; - - udbg_putc = udbg_real_scc_putc; - udbg_getc = NULL; - udbg_getc_poll = NULL; -} diff --git a/arch/ppc64/kernel/vdso.c b/arch/ppc64/kernel/vdso.c deleted file mode 100644 index 4aacf521e3e4..000000000000 --- a/arch/ppc64/kernel/vdso.c +++ /dev/null @@ -1,624 +0,0 @@ -/* - * linux/arch/ppc64/kernel/vdso.c - * - * Copyright (C) 2004 Benjamin Herrenschmidt, IBM Corp. - * <benh@kernel.crashing.org> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include <linux/config.h> -#include <linux/module.h> -#include <linux/errno.h> -#include <linux/sched.h> -#include <linux/kernel.h> -#include <linux/mm.h> -#include <linux/smp.h> -#include <linux/smp_lock.h> -#include <linux/stddef.h> -#include <linux/unistd.h> -#include <linux/slab.h> -#include <linux/user.h> -#include <linux/elf.h> -#include <linux/security.h> -#include <linux/bootmem.h> - -#include <asm/pgtable.h> -#include <asm/system.h> -#include <asm/processor.h> -#include <asm/mmu.h> -#include <asm/mmu_context.h> -#include <asm/machdep.h> -#include <asm/cputable.h> -#include <asm/sections.h> -#include <asm/vdso.h> - -#undef DEBUG - -#ifdef DEBUG -#define DBG(fmt...) printk(fmt) -#else -#define DBG(fmt...) -#endif - - -/* - * The vDSOs themselves are here - */ -extern char vdso64_start, vdso64_end; -extern char vdso32_start, vdso32_end; - -static void *vdso64_kbase = &vdso64_start; -static void *vdso32_kbase = &vdso32_start; - -unsigned int vdso64_pages; -unsigned int vdso32_pages; - -/* Signal trampolines user addresses */ - -unsigned long vdso64_rt_sigtramp; -unsigned long vdso32_sigtramp; -unsigned long vdso32_rt_sigtramp; - -/* Format of the patch table */ -struct vdso_patch_def -{ - u32 pvr_mask, pvr_value; - const char *gen_name; - const char *fix_name; -}; - -/* Table of functions to patch based on the CPU type/revision - * - * TODO: Improve by adding whole lists for each entry - */ -static struct vdso_patch_def vdso_patches[] = { - { - 0xffff0000, 0x003a0000, /* POWER5 */ - "__kernel_sync_dicache", "__kernel_sync_dicache_p5" - }, - { - 0xffff0000, 0x003b0000, /* POWER5 */ - "__kernel_sync_dicache", "__kernel_sync_dicache_p5" - }, -}; - -/* - * Some infos carried around for each of them during parsing at - * boot time. - */ -struct lib32_elfinfo -{ - Elf32_Ehdr *hdr; /* ptr to ELF */ - Elf32_Sym *dynsym; /* ptr to .dynsym section */ - unsigned long dynsymsize; /* size of .dynsym section */ - char *dynstr; /* ptr to .dynstr section */ - unsigned long text; /* offset of .text section in .so */ -}; - -struct lib64_elfinfo -{ - Elf64_Ehdr *hdr; - Elf64_Sym *dynsym; - unsigned long dynsymsize; - char *dynstr; - unsigned long text; -}; - - -#ifdef __DEBUG -static void dump_one_vdso_page(struct page *pg, struct page *upg) -{ - printk("kpg: %p (c:%d,f:%08lx)", __va(page_to_pfn(pg) << PAGE_SHIFT), - page_count(pg), - pg->flags); - if (upg/* && pg != upg*/) { - printk(" upg: %p (c:%d,f:%08lx)", __va(page_to_pfn(upg) << PAGE_SHIFT), - page_count(upg), - upg->flags); - } - printk("\n"); -} - -static void dump_vdso_pages(struct vm_area_struct * vma) -{ - int i; - - if (!vma || test_thread_flag(TIF_32BIT)) { - printk("vDSO32 @ %016lx:\n", (unsigned long)vdso32_kbase); - for (i=0; i<vdso32_pages; i++) { - struct page *pg = virt_to_page(vdso32_kbase + i*PAGE_SIZE); - struct page *upg = (vma && vma->vm_mm) ? - follow_page(vma->vm_mm, vma->vm_start + i*PAGE_SIZE, 0) - : NULL; - dump_one_vdso_page(pg, upg); - } - } - if (!vma || !test_thread_flag(TIF_32BIT)) { - printk("vDSO64 @ %016lx:\n", (unsigned long)vdso64_kbase); - for (i=0; i<vdso64_pages; i++) { - struct page *pg = virt_to_page(vdso64_kbase + i*PAGE_SIZE); - struct page *upg = (vma && vma->vm_mm) ? - follow_page(vma->vm_mm, vma->vm_start + i*PAGE_SIZE, 0) - : NULL; - dump_one_vdso_page(pg, upg); - } - } -} -#endif /* DEBUG */ - -/* - * Keep a dummy vma_close for now, it will prevent VMA merging. - */ -static void vdso_vma_close(struct vm_area_struct * vma) -{ -} - -/* - * Our nopage() function, maps in the actual vDSO kernel pages, they will - * be mapped read-only by do_no_page(), and eventually COW'ed, either - * right away for an initial write access, or by do_wp_page(). - */ -static struct page * vdso_vma_nopage(struct vm_area_struct * vma, - unsigned long address, int *type) -{ - unsigned long offset = address - vma->vm_start; - struct page *pg; - void *vbase = test_thread_flag(TIF_32BIT) ? vdso32_kbase : vdso64_kbase; - - DBG("vdso_vma_nopage(current: %s, address: %016lx, off: %lx)\n", - current->comm, address, offset); - - if (address < vma->vm_start || address > vma->vm_end) - return NOPAGE_SIGBUS; - - /* - * Last page is systemcfg. - */ - if ((vma->vm_end - address) <= PAGE_SIZE) - pg = virt_to_page(systemcfg); - else - pg = virt_to_page(vbase + offset); - - get_page(pg); - DBG(" ->page count: %d\n", page_count(pg)); - - return pg; -} - -static struct vm_operations_struct vdso_vmops = { - .close = vdso_vma_close, - .nopage = vdso_vma_nopage, -}; - -/* - * This is called from binfmt_elf, we create the special vma for the - * vDSO and insert it into the mm struct tree - */ -int arch_setup_additional_pages(struct linux_binprm *bprm, int executable_stack) -{ - struct mm_struct *mm = current->mm; - struct vm_area_struct *vma; - unsigned long vdso_pages; - unsigned long vdso_base; - - if (test_thread_flag(TIF_32BIT)) { - vdso_pages = vdso32_pages; - vdso_base = VDSO32_MBASE; - } else { - vdso_pages = vdso64_pages; - vdso_base = VDSO64_MBASE; - } - - current->thread.vdso_base = 0; - - /* vDSO has a problem and was disabled, just don't "enable" it for the - * process - */ - if (vdso_pages == 0) - return 0; - - vma = kmem_cache_alloc(vm_area_cachep, SLAB_KERNEL); - if (vma == NULL) - return -ENOMEM; - - memset(vma, 0, sizeof(*vma)); - - /* - * pick a base address for the vDSO in process space. We try to put it - * at vdso_base which is the "natural" base for it, but we might fail - * and end up putting it elsewhere. - */ - vdso_base = get_unmapped_area(NULL, vdso_base, - vdso_pages << PAGE_SHIFT, 0, 0); - if (vdso_base & ~PAGE_MASK) { - kmem_cache_free(vm_area_cachep, vma); - return (int)vdso_base; - } - - current->thread.vdso_base = vdso_base; - - vma->vm_mm = mm; - vma->vm_start = current->thread.vdso_base; - - /* - * the VMA size is one page more than the vDSO since systemcfg - * is mapped in the last one - */ - vma->vm_end = vma->vm_start + ((vdso_pages + 1) << PAGE_SHIFT); - - /* - * our vma flags don't have VM_WRITE so by default, the process isn't allowed - * to write those pages. - * gdb can break that with ptrace interface, and thus trigger COW on those - * pages but it's then your responsibility to never do that on the "data" page - * of the vDSO or you'll stop getting kernel updates and your nice userland - * gettimeofday will be totally dead. It's fine to use that for setting - * breakpoints in the vDSO code pages though - */ - vma->vm_flags = VM_READ | VM_EXEC | VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC | VM_RESERVED; - vma->vm_flags |= mm->def_flags; - vma->vm_page_prot = protection_map[vma->vm_flags & 0x7]; - vma->vm_ops = &vdso_vmops; - - down_write(&mm->mmap_sem); - if (insert_vm_struct(mm, vma)) { - up_write(&mm->mmap_sem); - kmem_cache_free(vm_area_cachep, vma); - return -ENOMEM; - } - mm->total_vm += (vma->vm_end - vma->vm_start) >> PAGE_SHIFT; - up_write(&mm->mmap_sem); - - return 0; -} - -static void * __init find_section32(Elf32_Ehdr *ehdr, const char *secname, - unsigned long *size) -{ - Elf32_Shdr *sechdrs; - unsigned int i; - char *secnames; - - /* Grab section headers and strings so we can tell who is who */ - sechdrs = (void *)ehdr + ehdr->e_shoff; - secnames = (void *)ehdr + sechdrs[ehdr->e_shstrndx].sh_offset; - - /* Find the section they want */ - for (i = 1; i < ehdr->e_shnum; i++) { - if (strcmp(secnames+sechdrs[i].sh_name, secname) == 0) { - if (size) - *size = sechdrs[i].sh_size; - return (void *)ehdr + sechdrs[i].sh_offset; - } - } - *size = 0; - return NULL; -} - -static void * __init find_section64(Elf64_Ehdr *ehdr, const char *secname, - unsigned long *size) -{ - Elf64_Shdr *sechdrs; - unsigned int i; - char *secnames; - - /* Grab section headers and strings so we can tell who is who */ - sechdrs = (void *)ehdr + ehdr->e_shoff; - secnames = (void *)ehdr + sechdrs[ehdr->e_shstrndx].sh_offset; - - /* Find the section they want */ - for (i = 1; i < ehdr->e_shnum; i++) { - if (strcmp(secnames+sechdrs[i].sh_name, secname) == 0) { - if (size) - *size = sechdrs[i].sh_size; - return (void *)ehdr + sechdrs[i].sh_offset; - } - } - if (size) - *size = 0; - return NULL; -} - -static Elf32_Sym * __init find_symbol32(struct lib32_elfinfo *lib, const char *symname) -{ - unsigned int i; - char name[32], *c; - - for (i = 0; i < (lib->dynsymsize / sizeof(Elf32_Sym)); i++) { - if (lib->dynsym[i].st_name == 0) - continue; - strlcpy(name, lib->dynstr + lib->dynsym[i].st_name, 32); - c = strchr(name, '@'); - if (c) - *c = 0; - if (strcmp(symname, name) == 0) - return &lib->dynsym[i]; - } - return NULL; -} - -static Elf64_Sym * __init find_symbol64(struct lib64_elfinfo *lib, const char *symname) -{ - unsigned int i; - char name[32], *c; - - for (i = 0; i < (lib->dynsymsize / sizeof(Elf64_Sym)); i++) { - if (lib->dynsym[i].st_name == 0) - continue; - strlcpy(name, lib->dynstr + lib->dynsym[i].st_name, 32); - c = strchr(name, '@'); - if (c) - *c = 0; - if (strcmp(symname, name) == 0) - return &lib->dynsym[i]; - } - return NULL; -} - -/* Note that we assume the section is .text and the symbol is relative to - * the library base - */ -static unsigned long __init find_function32(struct lib32_elfinfo *lib, const char *symname) -{ - Elf32_Sym *sym = find_symbol32(lib, symname); - - if (sym == NULL) { - printk(KERN_WARNING "vDSO32: function %s not found !\n", symname); - return 0; - } - return sym->st_value - VDSO32_LBASE; -} - -/* Note that we assume the section is .text and the symbol is relative to - * the library base - */ -static unsigned long __init find_function64(struct lib64_elfinfo *lib, const char *symname) -{ - Elf64_Sym *sym = find_symbol64(lib, symname); - - if (sym == NULL) { - printk(KERN_WARNING "vDSO64: function %s not found !\n", symname); - return 0; - } -#ifdef VDS64_HAS_DESCRIPTORS - return *((u64 *)(vdso64_kbase + sym->st_value - VDSO64_LBASE)) - VDSO64_LBASE; -#else - return sym->st_value - VDSO64_LBASE; -#endif -} - - -static __init int vdso_do_find_sections(struct lib32_elfinfo *v32, - struct lib64_elfinfo *v64) -{ - void *sect; - - /* - * Locate symbol tables & text section - */ - - v32->dynsym = find_section32(v32->hdr, ".dynsym", &v32->dynsymsize); - v32->dynstr = find_section32(v32->hdr, ".dynstr", NULL); - if (v32->dynsym == NULL || v32->dynstr == NULL) { - printk(KERN_ERR "vDSO32: a required symbol section was not found\n"); - return -1; - } - sect = find_section32(v32->hdr, ".text", NULL); - if (sect == NULL) { - printk(KERN_ERR "vDSO32: the .text section was not found\n"); - return -1; - } - v32->text = sect - vdso32_kbase; - - v64->dynsym = find_section64(v64->hdr, ".dynsym", &v64->dynsymsize); - v64->dynstr = find_section64(v64->hdr, ".dynstr", NULL); - if (v64->dynsym == NULL || v64->dynstr == NULL) { - printk(KERN_ERR "vDSO64: a required symbol section was not found\n"); - return -1; - } - sect = find_section64(v64->hdr, ".text", NULL); - if (sect == NULL) { - printk(KERN_ERR "vDSO64: the .text section was not found\n"); - return -1; - } - v64->text = sect - vdso64_kbase; - - return 0; -} - -static __init void vdso_setup_trampolines(struct lib32_elfinfo *v32, - struct lib64_elfinfo *v64) -{ - /* - * Find signal trampolines - */ - - vdso64_rt_sigtramp = find_function64(v64, "__kernel_sigtramp_rt64"); - vdso32_sigtramp = find_function32(v32, "__kernel_sigtramp32"); - vdso32_rt_sigtramp = find_function32(v32, "__kernel_sigtramp_rt32"); -} - -static __init int vdso_fixup_datapage(struct lib32_elfinfo *v32, - struct lib64_elfinfo *v64) -{ - Elf32_Sym *sym32; - Elf64_Sym *sym64; - - sym32 = find_symbol32(v32, "__kernel_datapage_offset"); - if (sym32 == NULL) { - printk(KERN_ERR "vDSO32: Can't find symbol __kernel_datapage_offset !\n"); - return -1; - } - *((int *)(vdso32_kbase + (sym32->st_value - VDSO32_LBASE))) = - (vdso32_pages << PAGE_SHIFT) - (sym32->st_value - VDSO32_LBASE); - - sym64 = find_symbol64(v64, "__kernel_datapage_offset"); - if (sym64 == NULL) { - printk(KERN_ERR "vDSO64: Can't find symbol __kernel_datapage_offset !\n"); - return -1; - } - *((int *)(vdso64_kbase + sym64->st_value - VDSO64_LBASE)) = - (vdso64_pages << PAGE_SHIFT) - (sym64->st_value - VDSO64_LBASE); - - return 0; -} - -static int vdso_do_func_patch32(struct lib32_elfinfo *v32, - struct lib64_elfinfo *v64, - const char *orig, const char *fix) -{ - Elf32_Sym *sym32_gen, *sym32_fix; - - sym32_gen = find_symbol32(v32, orig); - if (sym32_gen == NULL) { - printk(KERN_ERR "vDSO32: Can't find symbol %s !\n", orig); - return -1; - } - sym32_fix = find_symbol32(v32, fix); - if (sym32_fix == NULL) { - printk(KERN_ERR "vDSO32: Can't find symbol %s !\n", fix); - return -1; - } - sym32_gen->st_value = sym32_fix->st_value; - sym32_gen->st_size = sym32_fix->st_size; - sym32_gen->st_info = sym32_fix->st_info; - sym32_gen->st_other = sym32_fix->st_other; - sym32_gen->st_shndx = sym32_fix->st_shndx; - - return 0; -} - -static int vdso_do_func_patch64(struct lib32_elfinfo *v32, - struct lib64_elfinfo *v64, - const char *orig, const char *fix) -{ - Elf64_Sym *sym64_gen, *sym64_fix; - - sym64_gen = find_symbol64(v64, orig); - if (sym64_gen == NULL) { - printk(KERN_ERR "vDSO64: Can't find symbol %s !\n", orig); - return -1; - } - sym64_fix = find_symbol64(v64, fix); - if (sym64_fix == NULL) { - printk(KERN_ERR "vDSO64: Can't find symbol %s !\n", fix); - return -1; - } - sym64_gen->st_value = sym64_fix->st_value; - sym64_gen->st_size = sym64_fix->st_size; - sym64_gen->st_info = sym64_fix->st_info; - sym64_gen->st_other = sym64_fix->st_other; - sym64_gen->st_shndx = sym64_fix->st_shndx; - - return 0; -} - -static __init int vdso_fixup_alt_funcs(struct lib32_elfinfo *v32, - struct lib64_elfinfo *v64) -{ - u32 pvr; - int i; - - pvr = mfspr(SPRN_PVR); - for (i = 0; i < ARRAY_SIZE(vdso_patches); i++) { - struct vdso_patch_def *patch = &vdso_patches[i]; - int match = (pvr & patch->pvr_mask) == patch->pvr_value; - - DBG("patch %d (mask: %x, pvr: %x) : %s\n", - i, patch->pvr_mask, patch->pvr_value, match ? "match" : "skip"); - - if (!match) - continue; - - DBG("replacing %s with %s...\n", patch->gen_name, patch->fix_name); - - /* - * Patch the 32 bits and 64 bits symbols. Note that we do not patch - * the "." symbol on 64 bits. It would be easy to do, but doesn't - * seem to be necessary, patching the OPD symbol is enough. - */ - vdso_do_func_patch32(v32, v64, patch->gen_name, patch->fix_name); - vdso_do_func_patch64(v32, v64, patch->gen_name, patch->fix_name); - } - - return 0; -} - - -static __init int vdso_setup(void) -{ - struct lib32_elfinfo v32; - struct lib64_elfinfo v64; - - v32.hdr = vdso32_kbase; - v64.hdr = vdso64_kbase; - - if (vdso_do_find_sections(&v32, &v64)) - return -1; - - if (vdso_fixup_datapage(&v32, &v64)) - return -1; - - if (vdso_fixup_alt_funcs(&v32, &v64)) - return -1; - - vdso_setup_trampolines(&v32, &v64); - - return 0; -} - -void __init vdso_init(void) -{ - int i; - - vdso64_pages = (&vdso64_end - &vdso64_start) >> PAGE_SHIFT; - vdso32_pages = (&vdso32_end - &vdso32_start) >> PAGE_SHIFT; - - DBG("vdso64_kbase: %p, 0x%x pages, vdso32_kbase: %p, 0x%x pages\n", - vdso64_kbase, vdso64_pages, vdso32_kbase, vdso32_pages); - - /* - * Initialize the vDSO images in memory, that is do necessary - * fixups of vDSO symbols, locate trampolines, etc... - */ - if (vdso_setup()) { - printk(KERN_ERR "vDSO setup failure, not enabled !\n"); - /* XXX should free pages here ? */ - vdso64_pages = vdso32_pages = 0; - return; - } - - /* Make sure pages are in the correct state */ - for (i = 0; i < vdso64_pages; i++) { - struct page *pg = virt_to_page(vdso64_kbase + i*PAGE_SIZE); - ClearPageReserved(pg); - get_page(pg); - } - for (i = 0; i < vdso32_pages; i++) { - struct page *pg = virt_to_page(vdso32_kbase + i*PAGE_SIZE); - ClearPageReserved(pg); - get_page(pg); - } - - get_page(virt_to_page(systemcfg)); -} - -int in_gate_area_no_task(unsigned long addr) -{ - return 0; -} - -int in_gate_area(struct task_struct *task, unsigned long addr) -{ - return 0; -} - -struct vm_area_struct *get_gate_vma(struct task_struct *tsk) -{ - return NULL; -} - diff --git a/arch/ppc64/kernel/vdso32/Makefile b/arch/ppc64/kernel/vdso32/Makefile deleted file mode 100644 index 0b1b0df973eb..000000000000 --- a/arch/ppc64/kernel/vdso32/Makefile +++ /dev/null @@ -1,36 +0,0 @@ - -# List of files in the vdso, has to be asm only for now - -obj-vdso32 = sigtramp.o gettimeofday.o datapage.o cacheflush.o note.o - -# Build rules - -targets := $(obj-vdso32) vdso32.so -obj-vdso32 := $(addprefix $(obj)/, $(obj-vdso32)) - - -EXTRA_CFLAGS := -shared -s -fno-common -fno-builtin -EXTRA_CFLAGS += -nostdlib -Wl,-soname=linux-vdso32.so.1 -EXTRA_AFLAGS := -D__VDSO32__ -s - -obj-y += vdso32_wrapper.o -extra-y += vdso32.lds -CPPFLAGS_vdso32.lds += -P -C -U$(ARCH) - -# Force dependency (incbin is bad) -$(obj)/vdso32_wrapper.o : $(obj)/vdso32.so - -# link rule for the .so file, .lds has to be first -$(obj)/vdso32.so: $(src)/vdso32.lds $(obj-vdso32) - $(call if_changed,vdso32ld) - -# assembly rules for the .S files -$(obj-vdso32): %.o: %.S - $(call if_changed_dep,vdso32as) - -# actual build commands -quiet_cmd_vdso32ld = VDSO32L $@ - cmd_vdso32ld = $(CROSS32CC) $(c_flags) -Wl,-T $^ -o $@ -quiet_cmd_vdso32as = VDSO32A $@ - cmd_vdso32as = $(CROSS32CC) $(a_flags) -c -o $@ $< - diff --git a/arch/ppc64/kernel/vdso32/cacheflush.S b/arch/ppc64/kernel/vdso32/cacheflush.S deleted file mode 100644 index c8db993574ee..000000000000 --- a/arch/ppc64/kernel/vdso32/cacheflush.S +++ /dev/null @@ -1,67 +0,0 @@ -/* - * vDSO provided cache flush routines - * - * Copyright (C) 2004 Benjamin Herrenschmuidt (benh@kernel.crashing.org), - * IBM Corp. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#include <linux/config.h> -#include <asm/processor.h> -#include <asm/ppc_asm.h> -#include <asm/vdso.h> -#include <asm/asm-offsets.h> - - .text - -/* - * Default "generic" version of __kernel_sync_dicache. - * - * void __kernel_sync_dicache(unsigned long start, unsigned long end) - * - * Flushes the data cache & invalidate the instruction cache for the - * provided range [start, end[ - * - * Note: all CPUs supported by this kernel have a 128 bytes cache - * line size so we don't have to peek that info from the datapage - */ -V_FUNCTION_BEGIN(__kernel_sync_dicache) - .cfi_startproc - li r5,127 - andc r6,r3,r5 /* round low to line bdy */ - subf r8,r6,r4 /* compute length */ - add r8,r8,r5 /* ensure we get enough */ - srwi. r8,r8,7 /* compute line count */ - beqlr /* nothing to do? */ - mtctr r8 - mr r3,r6 -1: dcbst 0,r3 - addi r3,r3,128 - bdnz 1b - sync - mtctr r8 -1: icbi 0,r6 - addi r6,r6,128 - bdnz 1b - isync - li r3,0 - blr - .cfi_endproc -V_FUNCTION_END(__kernel_sync_dicache) - - -/* - * POWER5 version of __kernel_sync_dicache - */ -V_FUNCTION_BEGIN(__kernel_sync_dicache_p5) - .cfi_startproc - sync - isync - li r3,0 - blr - .cfi_endproc -V_FUNCTION_END(__kernel_sync_dicache_p5) - diff --git a/arch/ppc64/kernel/vdso32/datapage.S b/arch/ppc64/kernel/vdso32/datapage.S deleted file mode 100644 index 4f4eb0be3992..000000000000 --- a/arch/ppc64/kernel/vdso32/datapage.S +++ /dev/null @@ -1,68 +0,0 @@ -/* - * Access to the shared data page by the vDSO & syscall map - * - * Copyright (C) 2004 Benjamin Herrenschmuidt (benh@kernel.crashing.org), IBM Corp. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include <linux/config.h> -#include <asm/processor.h> -#include <asm/ppc_asm.h> -#include <asm/asm-offsets.h> -#include <asm/unistd.h> -#include <asm/vdso.h> - - .text -V_FUNCTION_BEGIN(__get_datapage) - .cfi_startproc - /* We don't want that exposed or overridable as we want other objects - * to be able to bl directly to here - */ - .protected __get_datapage - .hidden __get_datapage - - mflr r0 - .cfi_register lr,r0 - - bcl 20,31,1f - .global __kernel_datapage_offset; -__kernel_datapage_offset: - .long 0 -1: - mflr r3 - mtlr r0 - lwz r0,0(r3) - add r3,r0,r3 - blr - .cfi_endproc -V_FUNCTION_END(__get_datapage) - -/* - * void *__kernel_get_syscall_map(unsigned int *syscall_count) ; - * - * returns a pointer to the syscall map. the map is agnostic to the - * size of "long", unlike kernel bitops, it stores bits from top to - * bottom so that memory actually contains a linear bitmap - * check for syscall N by testing bit (0x80000000 >> (N & 0x1f)) of - * 32 bits int at N >> 5. - */ -V_FUNCTION_BEGIN(__kernel_get_syscall_map) - .cfi_startproc - mflr r12 - .cfi_register lr,r12 - - mr r4,r3 - bl __get_datapage@local - mtlr r12 - addi r3,r3,CFG_SYSCALL_MAP32 - cmpli cr0,r4,0 - beqlr - li r0,__NR_syscalls - stw r0,0(r4) - blr - .cfi_endproc -V_FUNCTION_END(__kernel_get_syscall_map) diff --git a/arch/ppc64/kernel/vdso32/gettimeofday.S b/arch/ppc64/kernel/vdso32/gettimeofday.S deleted file mode 100644 index e243c1d24af7..000000000000 --- a/arch/ppc64/kernel/vdso32/gettimeofday.S +++ /dev/null @@ -1,140 +0,0 @@ -/* - * Userland implementation of gettimeofday() for 32 bits processes in a - * ppc64 kernel for use in the vDSO - * - * Copyright (C) 2004 Benjamin Herrenschmuidt (benh@kernel.crashing.org), IBM Corp. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#include <linux/config.h> -#include <asm/processor.h> -#include <asm/ppc_asm.h> -#include <asm/vdso.h> -#include <asm/asm-offsets.h> -#include <asm/unistd.h> - - .text -/* - * Exact prototype of gettimeofday - * - * int __kernel_gettimeofday(struct timeval *tv, struct timezone *tz); - * - */ -V_FUNCTION_BEGIN(__kernel_gettimeofday) - .cfi_startproc - mflr r12 - .cfi_register lr,r12 - - mr r10,r3 /* r10 saves tv */ - mr r11,r4 /* r11 saves tz */ - bl __get_datapage@local /* get data page */ - mr r9, r3 /* datapage ptr in r9 */ - bl __do_get_xsec@local /* get xsec from tb & kernel */ - bne- 2f /* out of line -> do syscall */ - - /* seconds are xsec >> 20 */ - rlwinm r5,r4,12,20,31 - rlwimi r5,r3,12,0,19 - stw r5,TVAL32_TV_SEC(r10) - - /* get remaining xsec and convert to usec. we scale - * up remaining xsec by 12 bits and get the top 32 bits - * of the multiplication - */ - rlwinm r5,r4,12,0,19 - lis r6,1000000@h - ori r6,r6,1000000@l - mulhwu r5,r5,r6 - stw r5,TVAL32_TV_USEC(r10) - - cmpli cr0,r11,0 /* check if tz is NULL */ - beq 1f - lwz r4,CFG_TZ_MINUTEWEST(r9)/* fill tz */ - lwz r5,CFG_TZ_DSTTIME(r9) - stw r4,TZONE_TZ_MINWEST(r11) - stw r5,TZONE_TZ_DSTTIME(r11) - -1: mtlr r12 - li r3,0 - blr - -2: mr r3,r10 - mr r4,r11 - li r0,__NR_gettimeofday - sc - b 1b - .cfi_endproc -V_FUNCTION_END(__kernel_gettimeofday) - -/* - * This is the core of gettimeofday(), it returns the xsec - * value in r3 & r4 and expects the datapage ptr (non clobbered) - * in r9. clobbers r0,r4,r5,r6,r7,r8 -*/ -__do_get_xsec: - .cfi_startproc - /* Check for update count & load values. We use the low - * order 32 bits of the update count - */ -1: lwz r8,(CFG_TB_UPDATE_COUNT+4)(r9) - andi. r0,r8,1 /* pending update ? loop */ - bne- 1b - xor r0,r8,r8 /* create dependency */ - add r9,r9,r0 - - /* Load orig stamp (offset to TB) */ - lwz r5,CFG_TB_ORIG_STAMP(r9) - lwz r6,(CFG_TB_ORIG_STAMP+4)(r9) - - /* Get a stable TB value */ -2: mftbu r3 - mftbl r4 - mftbu r0 - cmpl cr0,r3,r0 - bne- 2b - - /* Substract tb orig stamp. If the high part is non-zero, we jump to the - * slow path which call the syscall. If it's ok, then we have our 32 bits - * tb_ticks value in r7 - */ - subfc r7,r6,r4 - subfe. r0,r5,r3 - bne- 3f - - /* Load scale factor & do multiplication */ - lwz r5,CFG_TB_TO_XS(r9) /* load values */ - lwz r6,(CFG_TB_TO_XS+4)(r9) - mulhwu r4,r7,r5 - mulhwu r6,r7,r6 - mullw r0,r7,r5 - addc r6,r6,r0 - - /* At this point, we have the scaled xsec value in r4 + XER:CA - * we load & add the stamp since epoch - */ - lwz r5,CFG_STAMP_XSEC(r9) - lwz r6,(CFG_STAMP_XSEC+4)(r9) - adde r4,r4,r6 - addze r3,r5 - - /* We now have our result in r3,r4. We create a fake dependency - * on that result and re-check the counter - */ - xor r0,r4,r4 - add r9,r9,r0 - lwz r0,(CFG_TB_UPDATE_COUNT+4)(r9) - cmpl cr0,r8,r0 /* check if updated */ - bne- 1b - - /* Warning ! The caller expects CR:EQ to be set to indicate a - * successful calculation (so it won't fallback to the syscall - * method). We have overriden that CR bit in the counter check, - * but fortunately, the loop exit condition _is_ CR:EQ set, so - * we can exit safely here. If you change this code, be careful - * of that side effect. - */ -3: blr - .cfi_endproc diff --git a/arch/ppc64/kernel/vdso32/note.S b/arch/ppc64/kernel/vdso32/note.S deleted file mode 100644 index d4b5be4f3d5f..000000000000 --- a/arch/ppc64/kernel/vdso32/note.S +++ /dev/null @@ -1,25 +0,0 @@ -/* - * This supplies .note.* sections to go into the PT_NOTE inside the vDSO text. - * Here we can supply some information useful to userland. - */ - -#include <linux/uts.h> -#include <linux/version.h> - -#define ASM_ELF_NOTE_BEGIN(name, flags, vendor, type) \ - .section name, flags; \ - .balign 4; \ - .long 1f - 0f; /* name length */ \ - .long 3f - 2f; /* data length */ \ - .long type; /* note type */ \ -0: .asciz vendor; /* vendor name */ \ -1: .balign 4; \ -2: - -#define ASM_ELF_NOTE_END \ -3: .balign 4; /* pad out section */ \ - .previous - - ASM_ELF_NOTE_BEGIN(".note.kernel-version", "a", UTS_SYSNAME, 0) - .long LINUX_VERSION_CODE - ASM_ELF_NOTE_END diff --git a/arch/ppc64/kernel/vdso32/sigtramp.S b/arch/ppc64/kernel/vdso32/sigtramp.S deleted file mode 100644 index e04642781917..000000000000 --- a/arch/ppc64/kernel/vdso32/sigtramp.S +++ /dev/null @@ -1,300 +0,0 @@ -/* - * Signal trampolines for 32 bits processes in a ppc64 kernel for - * use in the vDSO - * - * Copyright (C) 2004 Benjamin Herrenschmuidt (benh@kernel.crashing.org), IBM Corp. - * Copyright (C) 2004 Alan Modra (amodra@au.ibm.com)), IBM Corp. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#include <linux/config.h> -#include <asm/processor.h> -#include <asm/ppc_asm.h> -#include <asm/unistd.h> -#include <asm/vdso.h> - - .text - -/* The nop here is a hack. The dwarf2 unwind routines subtract 1 from - the return address to get an address in the middle of the presumed - call instruction. Since we don't have a call here, we artifically - extend the range covered by the unwind info by adding a nop before - the real start. */ - nop -V_FUNCTION_BEGIN(__kernel_sigtramp32) -.Lsig_start = . - 4 - li r0,__NR_sigreturn - sc -.Lsig_end: -V_FUNCTION_END(__kernel_sigtramp32) - -.Lsigrt_start: - nop -V_FUNCTION_BEGIN(__kernel_sigtramp_rt32) - li r0,__NR_rt_sigreturn - sc -.Lsigrt_end: -V_FUNCTION_END(__kernel_sigtramp_rt32) - - .section .eh_frame,"a",@progbits - -/* Register r1 can be found at offset 4 of a pt_regs structure. - A pointer to the pt_regs is stored in memory at the old sp plus PTREGS. */ -#define cfa_save \ - .byte 0x0f; /* DW_CFA_def_cfa_expression */ \ - .uleb128 9f - 1f; /* length */ \ -1: \ - .byte 0x71; .sleb128 PTREGS; /* DW_OP_breg1 */ \ - .byte 0x06; /* DW_OP_deref */ \ - .byte 0x23; .uleb128 RSIZE; /* DW_OP_plus_uconst */ \ - .byte 0x06; /* DW_OP_deref */ \ -9: - -/* Register REGNO can be found at offset OFS of a pt_regs structure. - A pointer to the pt_regs is stored in memory at the old sp plus PTREGS. */ -#define rsave(regno, ofs) \ - .byte 0x10; /* DW_CFA_expression */ \ - .uleb128 regno; /* regno */ \ - .uleb128 9f - 1f; /* length */ \ -1: \ - .byte 0x71; .sleb128 PTREGS; /* DW_OP_breg1 */ \ - .byte 0x06; /* DW_OP_deref */ \ - .ifne ofs; \ - .byte 0x23; .uleb128 ofs; /* DW_OP_plus_uconst */ \ - .endif; \ -9: - -/* If msr bit 1<<25 is set, then VMX register REGNO is at offset REGNO*16 - of the VMX reg struct. The VMX reg struct is at offset VREGS of - the pt_regs struct. This macro is for REGNO == 0, and contains - 'subroutines' that the other macros jump to. */ -#define vsave_msr0(regno) \ - .byte 0x10; /* DW_CFA_expression */ \ - .uleb128 regno + 77; /* regno */ \ - .uleb128 9f - 1f; /* length */ \ -1: \ - .byte 0x30 + regno; /* DW_OP_lit0 */ \ -2: \ - .byte 0x40; /* DW_OP_lit16 */ \ - .byte 0x1e; /* DW_OP_mul */ \ -3: \ - .byte 0x71; .sleb128 PTREGS; /* DW_OP_breg1 */ \ - .byte 0x06; /* DW_OP_deref */ \ - .byte 0x12; /* DW_OP_dup */ \ - .byte 0x23; /* DW_OP_plus_uconst */ \ - .uleb128 33*RSIZE; /* msr offset */ \ - .byte 0x06; /* DW_OP_deref */ \ - .byte 0x0c; .long 1 << 25; /* DW_OP_const4u */ \ - .byte 0x1a; /* DW_OP_and */ \ - .byte 0x12; /* DW_OP_dup, ret 0 if bra taken */ \ - .byte 0x30; /* DW_OP_lit0 */ \ - .byte 0x29; /* DW_OP_eq */ \ - .byte 0x28; .short 0x7fff; /* DW_OP_bra to end */ \ - .byte 0x13; /* DW_OP_drop, pop the 0 */ \ - .byte 0x23; .uleb128 VREGS; /* DW_OP_plus_uconst */ \ - .byte 0x22; /* DW_OP_plus */ \ - .byte 0x2f; .short 0x7fff; /* DW_OP_skip to end */ \ -9: - -/* If msr bit 1<<25 is set, then VMX register REGNO is at offset REGNO*16 - of the VMX reg struct. REGNO is 1 thru 31. */ -#define vsave_msr1(regno) \ - .byte 0x10; /* DW_CFA_expression */ \ - .uleb128 regno + 77; /* regno */ \ - .uleb128 9f - 1f; /* length */ \ -1: \ - .byte 0x30 + regno; /* DW_OP_lit n */ \ - .byte 0x2f; .short 2b - 9f; /* DW_OP_skip */ \ -9: - -/* If msr bit 1<<25 is set, then VMX register REGNO is at offset OFS of - the VMX save block. */ -#define vsave_msr2(regno, ofs) \ - .byte 0x10; /* DW_CFA_expression */ \ - .uleb128 regno + 77; /* regno */ \ - .uleb128 9f - 1f; /* length */ \ -1: \ - .byte 0x0a; .short ofs; /* DW_OP_const2u */ \ - .byte 0x2f; .short 3b - 9f; /* DW_OP_skip */ \ -9: - -/* VMX register REGNO is at offset OFS of the VMX save area. */ -#define vsave(regno, ofs) \ - .byte 0x10; /* DW_CFA_expression */ \ - .uleb128 regno + 77; /* regno */ \ - .uleb128 9f - 1f; /* length */ \ -1: \ - .byte 0x71; .sleb128 PTREGS; /* DW_OP_breg1 */ \ - .byte 0x06; /* DW_OP_deref */ \ - .byte 0x23; .uleb128 VREGS; /* DW_OP_plus_uconst */ \ - .byte 0x23; .uleb128 ofs; /* DW_OP_plus_uconst */ \ -9: - -/* This is where the pt_regs pointer can be found on the stack. */ -#define PTREGS 64+28 - -/* Size of regs. */ -#define RSIZE 4 - -/* This is the offset of the VMX regs. */ -#define VREGS 48*RSIZE+34*8 - -/* Describe where general purpose regs are saved. */ -#define EH_FRAME_GEN \ - cfa_save; \ - rsave ( 0, 0*RSIZE); \ - rsave ( 2, 2*RSIZE); \ - rsave ( 3, 3*RSIZE); \ - rsave ( 4, 4*RSIZE); \ - rsave ( 5, 5*RSIZE); \ - rsave ( 6, 6*RSIZE); \ - rsave ( 7, 7*RSIZE); \ - rsave ( 8, 8*RSIZE); \ - rsave ( 9, 9*RSIZE); \ - rsave (10, 10*RSIZE); \ - rsave (11, 11*RSIZE); \ - rsave (12, 12*RSIZE); \ - rsave (13, 13*RSIZE); \ - rsave (14, 14*RSIZE); \ - rsave (15, 15*RSIZE); \ - rsave (16, 16*RSIZE); \ - rsave (17, 17*RSIZE); \ - rsave (18, 18*RSIZE); \ - rsave (19, 19*RSIZE); \ - rsave (20, 20*RSIZE); \ - rsave (21, 21*RSIZE); \ - rsave (22, 22*RSIZE); \ - rsave (23, 23*RSIZE); \ - rsave (24, 24*RSIZE); \ - rsave (25, 25*RSIZE); \ - rsave (26, 26*RSIZE); \ - rsave (27, 27*RSIZE); \ - rsave (28, 28*RSIZE); \ - rsave (29, 29*RSIZE); \ - rsave (30, 30*RSIZE); \ - rsave (31, 31*RSIZE); \ - rsave (67, 32*RSIZE); /* ap, used as temp for nip */ \ - rsave (65, 36*RSIZE); /* lr */ \ - rsave (70, 38*RSIZE) /* cr */ - -/* Describe where the FP regs are saved. */ -#define EH_FRAME_FP \ - rsave (32, 48*RSIZE + 0*8); \ - rsave (33, 48*RSIZE + 1*8); \ - rsave (34, 48*RSIZE + 2*8); \ - rsave (35, 48*RSIZE + 3*8); \ - rsave (36, 48*RSIZE + 4*8); \ - rsave (37, 48*RSIZE + 5*8); \ - rsave (38, 48*RSIZE + 6*8); \ - rsave (39, 48*RSIZE + 7*8); \ - rsave (40, 48*RSIZE + 8*8); \ - rsave (41, 48*RSIZE + 9*8); \ - rsave (42, 48*RSIZE + 10*8); \ - rsave (43, 48*RSIZE + 11*8); \ - rsave (44, 48*RSIZE + 12*8); \ - rsave (45, 48*RSIZE + 13*8); \ - rsave (46, 48*RSIZE + 14*8); \ - rsave (47, 48*RSIZE + 15*8); \ - rsave (48, 48*RSIZE + 16*8); \ - rsave (49, 48*RSIZE + 17*8); \ - rsave (50, 48*RSIZE + 18*8); \ - rsave (51, 48*RSIZE + 19*8); \ - rsave (52, 48*RSIZE + 20*8); \ - rsave (53, 48*RSIZE + 21*8); \ - rsave (54, 48*RSIZE + 22*8); \ - rsave (55, 48*RSIZE + 23*8); \ - rsave (56, 48*RSIZE + 24*8); \ - rsave (57, 48*RSIZE + 25*8); \ - rsave (58, 48*RSIZE + 26*8); \ - rsave (59, 48*RSIZE + 27*8); \ - rsave (60, 48*RSIZE + 28*8); \ - rsave (61, 48*RSIZE + 29*8); \ - rsave (62, 48*RSIZE + 30*8); \ - rsave (63, 48*RSIZE + 31*8) - -/* Describe where the VMX regs are saved. */ -#ifdef CONFIG_ALTIVEC -#define EH_FRAME_VMX \ - vsave_msr0 ( 0); \ - vsave_msr1 ( 1); \ - vsave_msr1 ( 2); \ - vsave_msr1 ( 3); \ - vsave_msr1 ( 4); \ - vsave_msr1 ( 5); \ - vsave_msr1 ( 6); \ - vsave_msr1 ( 7); \ - vsave_msr1 ( 8); \ - vsave_msr1 ( 9); \ - vsave_msr1 (10); \ - vsave_msr1 (11); \ - vsave_msr1 (12); \ - vsave_msr1 (13); \ - vsave_msr1 (14); \ - vsave_msr1 (15); \ - vsave_msr1 (16); \ - vsave_msr1 (17); \ - vsave_msr1 (18); \ - vsave_msr1 (19); \ - vsave_msr1 (20); \ - vsave_msr1 (21); \ - vsave_msr1 (22); \ - vsave_msr1 (23); \ - vsave_msr1 (24); \ - vsave_msr1 (25); \ - vsave_msr1 (26); \ - vsave_msr1 (27); \ - vsave_msr1 (28); \ - vsave_msr1 (29); \ - vsave_msr1 (30); \ - vsave_msr1 (31); \ - vsave_msr2 (33, 32*16+12); \ - vsave (32, 32*16) -#else -#define EH_FRAME_VMX -#endif - -.Lcie: - .long .Lcie_end - .Lcie_start -.Lcie_start: - .long 0 /* CIE ID */ - .byte 1 /* Version number */ - .string "zR" /* NUL-terminated augmentation string */ - .uleb128 4 /* Code alignment factor */ - .sleb128 -4 /* Data alignment factor */ - .byte 67 /* Return address register column, ap */ - .uleb128 1 /* Augmentation value length */ - .byte 0x1b /* DW_EH_PE_pcrel | DW_EH_PE_sdata4. */ - .byte 0x0c,1,0 /* DW_CFA_def_cfa: r1 ofs 0 */ - .balign 4 -.Lcie_end: - - .long .Lfde0_end - .Lfde0_start -.Lfde0_start: - .long .Lfde0_start - .Lcie /* CIE pointer. */ - .long .Lsig_start - . /* PC start, length */ - .long .Lsig_end - .Lsig_start - .uleb128 0 /* Augmentation */ - EH_FRAME_GEN - EH_FRAME_FP - EH_FRAME_VMX - .balign 4 -.Lfde0_end: - -/* We have a different stack layout for rt_sigreturn. */ -#undef PTREGS -#define PTREGS 64+16+128+20+28 - - .long .Lfde1_end - .Lfde1_start -.Lfde1_start: - .long .Lfde1_start - .Lcie /* CIE pointer. */ - .long .Lsigrt_start - . /* PC start, length */ - .long .Lsigrt_end - .Lsigrt_start - .uleb128 0 /* Augmentation */ - EH_FRAME_GEN - EH_FRAME_FP - EH_FRAME_VMX - .balign 4 -.Lfde1_end: diff --git a/arch/ppc64/kernel/vdso32/vdso32.lds.S b/arch/ppc64/kernel/vdso32/vdso32.lds.S deleted file mode 100644 index 6f87a916a394..000000000000 --- a/arch/ppc64/kernel/vdso32/vdso32.lds.S +++ /dev/null @@ -1,114 +0,0 @@ - -/* - * This is the infamous ld script for the 32 bits vdso - * library - */ -#include <asm/vdso.h> - -/* Default link addresses for the vDSOs */ -OUTPUT_FORMAT("elf32-powerpc", "elf32-powerpc", "elf32-powerpc") -OUTPUT_ARCH(powerpc:common) -ENTRY(_start) - -SECTIONS -{ - . = VDSO32_LBASE + SIZEOF_HEADERS; - .hash : { *(.hash) } :text - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .gnu.version : { *(.gnu.version) } - .gnu.version_d : { *(.gnu.version_d) } - .gnu.version_r : { *(.gnu.version_r) } - - .note : { *(.note.*) } :text :note - - . = ALIGN (16); - .text : - { - *(.text .stub .text.* .gnu.linkonce.t.*) - } - PROVIDE (__etext = .); - PROVIDE (_etext = .); - PROVIDE (etext = .); - - /* Other stuff is appended to the text segment: */ - .rodata : { *(.rodata .rodata.* .gnu.linkonce.r.*) } - .rodata1 : { *(.rodata1) } - - .eh_frame_hdr : { *(.eh_frame_hdr) } :text :eh_frame_hdr - .eh_frame : { KEEP (*(.eh_frame)) } :text - .gcc_except_table : { *(.gcc_except_table) } - .fixup : { *(.fixup) } - - .dynamic : { *(.dynamic) } :text :dynamic - .got : { *(.got) } - .plt : { *(.plt) } - - _end = .; - __end = .; - PROVIDE (end = .); - - - /* Stabs debugging sections are here too - */ - .stab 0 : { *(.stab) } - .stabstr 0 : { *(.stabstr) } - .stab.excl 0 : { *(.stab.excl) } - .stab.exclstr 0 : { *(.stab.exclstr) } - .stab.index 0 : { *(.stab.index) } - .stab.indexstr 0 : { *(.stab.indexstr) } - .comment 0 : { *(.comment) } - .debug 0 : { *(.debug) } - .line 0 : { *(.line) } - - .debug_srcinfo 0 : { *(.debug_srcinfo) } - .debug_sfnames 0 : { *(.debug_sfnames) } - - .debug_aranges 0 : { *(.debug_aranges) } - .debug_pubnames 0 : { *(.debug_pubnames) } - - .debug_info 0 : { *(.debug_info .gnu.linkonce.wi.*) } - .debug_abbrev 0 : { *(.debug_abbrev) } - .debug_line 0 : { *(.debug_line) } - .debug_frame 0 : { *(.debug_frame) } - .debug_str 0 : { *(.debug_str) } - .debug_loc 0 : { *(.debug_loc) } - .debug_macinfo 0 : { *(.debug_macinfo) } - - .debug_weaknames 0 : { *(.debug_weaknames) } - .debug_funcnames 0 : { *(.debug_funcnames) } - .debug_typenames 0 : { *(.debug_typenames) } - .debug_varnames 0 : { *(.debug_varnames) } - - /DISCARD/ : { *(.note.GNU-stack) } - /DISCARD/ : { *(.data .data.* .gnu.linkonce.d.* .sdata*) } - /DISCARD/ : { *(.bss .sbss .dynbss .dynsbss) } -} - - -PHDRS -{ - text PT_LOAD FILEHDR PHDRS FLAGS(5); /* PF_R|PF_X */ - note PT_NOTE FLAGS(4); /* PF_R */ - dynamic PT_DYNAMIC FLAGS(4); /* PF_R */ - eh_frame_hdr 0x6474e550; /* PT_GNU_EH_FRAME, but ld doesn't match the name */ -} - - -/* - * This controls what symbols we export from the DSO. - */ -VERSION -{ - VDSO_VERSION_STRING { - global: - __kernel_datapage_offset; /* Has to be there for the kernel to find it */ - __kernel_get_syscall_map; - __kernel_gettimeofday; - __kernel_sync_dicache; - __kernel_sync_dicache_p5; - __kernel_sigtramp32; - __kernel_sigtramp_rt32; - local: *; - }; -} diff --git a/arch/ppc64/kernel/vdso32/vdso32_wrapper.S b/arch/ppc64/kernel/vdso32/vdso32_wrapper.S deleted file mode 100644 index 76ca28e09d29..000000000000 --- a/arch/ppc64/kernel/vdso32/vdso32_wrapper.S +++ /dev/null @@ -1,13 +0,0 @@ -#include <linux/init.h> -#include <asm/page.h> - - .section ".data.page_aligned" - - .globl vdso32_start, vdso32_end - .balign PAGE_SIZE -vdso32_start: - .incbin "arch/ppc64/kernel/vdso32/vdso32.so" - .balign PAGE_SIZE -vdso32_end: - - .previous diff --git a/arch/ppc64/kernel/vdso64/Makefile b/arch/ppc64/kernel/vdso64/Makefile deleted file mode 100644 index ab39988452cc..000000000000 --- a/arch/ppc64/kernel/vdso64/Makefile +++ /dev/null @@ -1,35 +0,0 @@ -# List of files in the vdso, has to be asm only for now - -obj-vdso64 = sigtramp.o gettimeofday.o datapage.o cacheflush.o note.o - -# Build rules - -targets := $(obj-vdso64) vdso64.so -obj-vdso64 := $(addprefix $(obj)/, $(obj-vdso64)) - -EXTRA_CFLAGS := -shared -s -fno-common -fno-builtin -EXTRA_CFLAGS += -nostdlib -Wl,-soname=linux-vdso64.so.1 -EXTRA_AFLAGS := -D__VDSO64__ -s - -obj-y += vdso64_wrapper.o -extra-y += vdso64.lds -CPPFLAGS_vdso64.lds += -P -C -U$(ARCH) - -# Force dependency (incbin is bad) -$(obj)/vdso64_wrapper.o : $(obj)/vdso64.so - -# link rule for the .so file, .lds has to be first -$(obj)/vdso64.so: $(src)/vdso64.lds $(obj-vdso64) - $(call if_changed,vdso64ld) - -# assembly rules for the .S files -$(obj-vdso64): %.o: %.S - $(call if_changed_dep,vdso64as) - -# actual build commands -quiet_cmd_vdso64ld = VDSO64L $@ - cmd_vdso64ld = $(CC) $(c_flags) -Wl,-T $^ -o $@ -quiet_cmd_vdso64as = VDSO64A $@ - cmd_vdso64as = $(CC) $(a_flags) -c -o $@ $< - - diff --git a/arch/ppc64/kernel/vdso64/cacheflush.S b/arch/ppc64/kernel/vdso64/cacheflush.S deleted file mode 100644 index d4a0ad28d534..000000000000 --- a/arch/ppc64/kernel/vdso64/cacheflush.S +++ /dev/null @@ -1,66 +0,0 @@ -/* - * vDSO provided cache flush routines - * - * Copyright (C) 2004 Benjamin Herrenschmuidt (benh@kernel.crashing.org), - * IBM Corp. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#include <linux/config.h> -#include <asm/processor.h> -#include <asm/ppc_asm.h> -#include <asm/vdso.h> -#include <asm/asm-offsets.h> - - .text - -/* - * Default "generic" version of __kernel_sync_dicache. - * - * void __kernel_sync_dicache(unsigned long start, unsigned long end) - * - * Flushes the data cache & invalidate the instruction cache for the - * provided range [start, end[ - * - * Note: all CPUs supported by this kernel have a 128 bytes cache - * line size so we don't have to peek that info from the datapage - */ -V_FUNCTION_BEGIN(__kernel_sync_dicache) - .cfi_startproc - li r5,127 - andc r6,r3,r5 /* round low to line bdy */ - subf r8,r6,r4 /* compute length */ - add r8,r8,r5 /* ensure we get enough */ - srwi. r8,r8,7 /* compute line count */ - beqlr /* nothing to do? */ - mtctr r8 - mr r3,r6 -1: dcbst 0,r3 - addi r3,r3,128 - bdnz 1b - sync - mtctr r8 -1: icbi 0,r6 - addi r6,r6,128 - bdnz 1b - isync - li r3,0 - blr - .cfi_endproc -V_FUNCTION_END(__kernel_sync_dicache) - - -/* - * POWER5 version of __kernel_sync_dicache - */ -V_FUNCTION_BEGIN(__kernel_sync_dicache_p5) - .cfi_startproc - sync - isync - li r3,0 - blr - .cfi_endproc -V_FUNCTION_END(__kernel_sync_dicache_p5) diff --git a/arch/ppc64/kernel/vdso64/datapage.S b/arch/ppc64/kernel/vdso64/datapage.S deleted file mode 100644 index ed6e599ae824..000000000000 --- a/arch/ppc64/kernel/vdso64/datapage.S +++ /dev/null @@ -1,68 +0,0 @@ -/* - * Access to the shared data page by the vDSO & syscall map - * - * Copyright (C) 2004 Benjamin Herrenschmuidt (benh@kernel.crashing.org), IBM Corp. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include <linux/config.h> -#include <asm/processor.h> -#include <asm/ppc_asm.h> -#include <asm/asm-offsets.h> -#include <asm/unistd.h> -#include <asm/vdso.h> - - .text -V_FUNCTION_BEGIN(__get_datapage) - .cfi_startproc - /* We don't want that exposed or overridable as we want other objects - * to be able to bl directly to here - */ - .protected __get_datapage - .hidden __get_datapage - - mflr r0 - .cfi_register lr,r0 - - bcl 20,31,1f - .global __kernel_datapage_offset; -__kernel_datapage_offset: - .long 0 -1: - mflr r3 - mtlr r0 - lwz r0,0(r3) - add r3,r0,r3 - blr - .cfi_endproc -V_FUNCTION_END(__get_datapage) - -/* - * void *__kernel_get_syscall_map(unsigned int *syscall_count) ; - * - * returns a pointer to the syscall map. the map is agnostic to the - * size of "long", unlike kernel bitops, it stores bits from top to - * bottom so that memory actually contains a linear bitmap - * check for syscall N by testing bit (0x80000000 >> (N & 0x1f)) of - * 32 bits int at N >> 5. - */ -V_FUNCTION_BEGIN(__kernel_get_syscall_map) - .cfi_startproc - mflr r12 - .cfi_register lr,r12 - - mr r4,r3 - bl V_LOCAL_FUNC(__get_datapage) - mtlr r12 - addi r3,r3,CFG_SYSCALL_MAP64 - cmpli cr0,r4,0 - beqlr - li r0,__NR_syscalls - stw r0,0(r4) - blr - .cfi_endproc -V_FUNCTION_END(__kernel_get_syscall_map) diff --git a/arch/ppc64/kernel/vdso64/gettimeofday.S b/arch/ppc64/kernel/vdso64/gettimeofday.S deleted file mode 100644 index f6df8028570a..000000000000 --- a/arch/ppc64/kernel/vdso64/gettimeofday.S +++ /dev/null @@ -1,91 +0,0 @@ -/* - * Userland implementation of gettimeofday() for 64 bits processes in a - * ppc64 kernel for use in the vDSO - * - * Copyright (C) 2004 Benjamin Herrenschmuidt (benh@kernel.crashing.org), - * IBM Corp. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#include <linux/config.h> -#include <asm/processor.h> -#include <asm/ppc_asm.h> -#include <asm/vdso.h> -#include <asm/asm-offsets.h> - - .text -/* - * Exact prototype of gettimeofday - * - * int __kernel_gettimeofday(struct timeval *tv, struct timezone *tz); - * - */ -V_FUNCTION_BEGIN(__kernel_gettimeofday) - .cfi_startproc - mflr r12 - .cfi_register lr,r12 - - mr r11,r3 /* r11 holds tv */ - mr r10,r4 /* r10 holds tz */ - bl V_LOCAL_FUNC(__get_datapage) /* get data page */ - bl V_LOCAL_FUNC(__do_get_xsec) /* get xsec from tb & kernel */ - lis r7,15 /* r7 = 1000000 = USEC_PER_SEC */ - ori r7,r7,16960 - rldicl r5,r4,44,20 /* r5 = sec = xsec / XSEC_PER_SEC */ - rldicr r6,r5,20,43 /* r6 = sec * XSEC_PER_SEC */ - std r5,TVAL64_TV_SEC(r11) /* store sec in tv */ - subf r0,r6,r4 /* r0 = xsec = (xsec - r6) */ - mulld r0,r0,r7 /* usec = (xsec * USEC_PER_SEC) / XSEC_PER_SEC */ - rldicl r0,r0,44,20 - cmpldi cr0,r10,0 /* check if tz is NULL */ - std r0,TVAL64_TV_USEC(r11) /* store usec in tv */ - beq 1f - lwz r4,CFG_TZ_MINUTEWEST(r3)/* fill tz */ - lwz r5,CFG_TZ_DSTTIME(r3) - stw r4,TZONE_TZ_MINWEST(r10) - stw r5,TZONE_TZ_DSTTIME(r10) -1: mtlr r12 - li r3,0 /* always success */ - blr - .cfi_endproc -V_FUNCTION_END(__kernel_gettimeofday) - - -/* - * This is the core of gettimeofday(), it returns the xsec - * value in r4 and expects the datapage ptr (non clobbered) - * in r3. clobbers r0,r4,r5,r6,r7,r8 -*/ -V_FUNCTION_BEGIN(__do_get_xsec) - .cfi_startproc - /* check for update count & load values */ -1: ld r7,CFG_TB_UPDATE_COUNT(r3) - andi. r0,r4,1 /* pending update ? loop */ - bne- 1b - xor r0,r4,r4 /* create dependency */ - add r3,r3,r0 - - /* Get TB & offset it */ - mftb r8 - ld r9,CFG_TB_ORIG_STAMP(r3) - subf r8,r9,r8 - - /* Scale result */ - ld r5,CFG_TB_TO_XS(r3) - mulhdu r8,r8,r5 - - /* Add stamp since epoch */ - ld r6,CFG_STAMP_XSEC(r3) - add r4,r6,r8 - - xor r0,r4,r4 - add r3,r3,r0 - ld r0,CFG_TB_UPDATE_COUNT(r3) - cmpld cr0,r0,r7 /* check if updated */ - bne- 1b - blr - .cfi_endproc -V_FUNCTION_END(__do_get_xsec) diff --git a/arch/ppc64/kernel/vdso64/note.S b/arch/ppc64/kernel/vdso64/note.S deleted file mode 100644 index dc2a509f7e8a..000000000000 --- a/arch/ppc64/kernel/vdso64/note.S +++ /dev/null @@ -1 +0,0 @@ -#include "../vdso32/note.S" diff --git a/arch/ppc64/kernel/vdso64/sigtramp.S b/arch/ppc64/kernel/vdso64/sigtramp.S deleted file mode 100644 index 31b604ab56de..000000000000 --- a/arch/ppc64/kernel/vdso64/sigtramp.S +++ /dev/null @@ -1,295 +0,0 @@ -/* - * Signal trampoline for 64 bits processes in a ppc64 kernel for - * use in the vDSO - * - * Copyright (C) 2004 Benjamin Herrenschmuidt (benh@kernel.crashing.org), IBM Corp. - * Copyright (C) 2004 Alan Modra (amodra@au.ibm.com)), IBM Corp. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#include <linux/config.h> -#include <asm/processor.h> -#include <asm/ppc_asm.h> -#include <asm/unistd.h> -#include <asm/vdso.h> -#include <asm/ptrace.h> /* XXX for __SIGNAL_FRAMESIZE */ - - .text - -/* The nop here is a hack. The dwarf2 unwind routines subtract 1 from - the return address to get an address in the middle of the presumed - call instruction. Since we don't have a call here, we artifically - extend the range covered by the unwind info by padding before the - real start. */ - nop - .balign 8 -V_FUNCTION_BEGIN(__kernel_sigtramp_rt64) -.Lsigrt_start = . - 4 - addi r1, r1, __SIGNAL_FRAMESIZE - li r0,__NR_rt_sigreturn - sc -.Lsigrt_end: -V_FUNCTION_END(__kernel_sigtramp_rt64) -/* The ".balign 8" above and the following zeros mimic the old stack - trampoline layout. The last magic value is the ucontext pointer, - chosen in such a way that older libgcc unwind code returns a zero - for a sigcontext pointer. */ - .long 0,0,0 - .quad 0,-21*8 - -/* Register r1 can be found at offset 8 of a pt_regs structure. - A pointer to the pt_regs is stored in memory at the old sp plus PTREGS. */ -#define cfa_save \ - .byte 0x0f; /* DW_CFA_def_cfa_expression */ \ - .uleb128 9f - 1f; /* length */ \ -1: \ - .byte 0x71; .sleb128 PTREGS; /* DW_OP_breg1 */ \ - .byte 0x06; /* DW_OP_deref */ \ - .byte 0x23; .uleb128 RSIZE; /* DW_OP_plus_uconst */ \ - .byte 0x06; /* DW_OP_deref */ \ -9: - -/* Register REGNO can be found at offset OFS of a pt_regs structure. - A pointer to the pt_regs is stored in memory at the old sp plus PTREGS. */ -#define rsave(regno, ofs) \ - .byte 0x10; /* DW_CFA_expression */ \ - .uleb128 regno; /* regno */ \ - .uleb128 9f - 1f; /* length */ \ -1: \ - .byte 0x71; .sleb128 PTREGS; /* DW_OP_breg1 */ \ - .byte 0x06; /* DW_OP_deref */ \ - .ifne ofs; \ - .byte 0x23; .uleb128 ofs; /* DW_OP_plus_uconst */ \ - .endif; \ -9: - -/* If msr bit 1<<25 is set, then VMX register REGNO is at offset REGNO*16 - of the VMX reg struct. A pointer to the VMX reg struct is at VREGS in - the pt_regs struct. This macro is for REGNO == 0, and contains - 'subroutines' that the other macros jump to. */ -#define vsave_msr0(regno) \ - .byte 0x10; /* DW_CFA_expression */ \ - .uleb128 regno + 77; /* regno */ \ - .uleb128 9f - 1f; /* length */ \ -1: \ - .byte 0x30 + regno; /* DW_OP_lit0 */ \ -2: \ - .byte 0x40; /* DW_OP_lit16 */ \ - .byte 0x1e; /* DW_OP_mul */ \ -3: \ - .byte 0x71; .sleb128 PTREGS; /* DW_OP_breg1 */ \ - .byte 0x06; /* DW_OP_deref */ \ - .byte 0x12; /* DW_OP_dup */ \ - .byte 0x23; /* DW_OP_plus_uconst */ \ - .uleb128 33*RSIZE; /* msr offset */ \ - .byte 0x06; /* DW_OP_deref */ \ - .byte 0x0c; .long 1 << 25; /* DW_OP_const4u */ \ - .byte 0x1a; /* DW_OP_and */ \ - .byte 0x12; /* DW_OP_dup, ret 0 if bra taken */ \ - .byte 0x30; /* DW_OP_lit0 */ \ - .byte 0x29; /* DW_OP_eq */ \ - .byte 0x28; .short 0x7fff; /* DW_OP_bra to end */ \ - .byte 0x13; /* DW_OP_drop, pop the 0 */ \ - .byte 0x23; .uleb128 VREGS; /* DW_OP_plus_uconst */ \ - .byte 0x06; /* DW_OP_deref */ \ - .byte 0x22; /* DW_OP_plus */ \ - .byte 0x2f; .short 0x7fff; /* DW_OP_skip to end */ \ -9: - -/* If msr bit 1<<25 is set, then VMX register REGNO is at offset REGNO*16 - of the VMX reg struct. REGNO is 1 thru 31. */ -#define vsave_msr1(regno) \ - .byte 0x10; /* DW_CFA_expression */ \ - .uleb128 regno + 77; /* regno */ \ - .uleb128 9f - 1f; /* length */ \ -1: \ - .byte 0x30 + regno; /* DW_OP_lit n */ \ - .byte 0x2f; .short 2b - 9f; /* DW_OP_skip */ \ -9: - -/* If msr bit 1<<25 is set, then VMX register REGNO is at offset OFS of - the VMX save block. */ -#define vsave_msr2(regno, ofs) \ - .byte 0x10; /* DW_CFA_expression */ \ - .uleb128 regno + 77; /* regno */ \ - .uleb128 9f - 1f; /* length */ \ -1: \ - .byte 0x0a; .short ofs; /* DW_OP_const2u */ \ - .byte 0x2f; .short 3b - 9f; /* DW_OP_skip */ \ -9: - -/* VMX register REGNO is at offset OFS of the VMX save area. */ -#define vsave(regno, ofs) \ - .byte 0x10; /* DW_CFA_expression */ \ - .uleb128 regno + 77; /* regno */ \ - .uleb128 9f - 1f; /* length */ \ -1: \ - .byte 0x71; .sleb128 PTREGS; /* DW_OP_breg1 */ \ - .byte 0x06; /* DW_OP_deref */ \ - .byte 0x23; .uleb128 VREGS; /* DW_OP_plus_uconst */ \ - .byte 0x06; /* DW_OP_deref */ \ - .byte 0x23; .uleb128 ofs; /* DW_OP_plus_uconst */ \ -9: - -/* This is where the pt_regs pointer can be found on the stack. */ -#define PTREGS 128+168+56 - -/* Size of regs. */ -#define RSIZE 8 - -/* This is the offset of the VMX reg pointer. */ -#define VREGS 48*RSIZE+33*8 - -/* Describe where general purpose regs are saved. */ -#define EH_FRAME_GEN \ - cfa_save; \ - rsave ( 0, 0*RSIZE); \ - rsave ( 2, 2*RSIZE); \ - rsave ( 3, 3*RSIZE); \ - rsave ( 4, 4*RSIZE); \ - rsave ( 5, 5*RSIZE); \ - rsave ( 6, 6*RSIZE); \ - rsave ( 7, 7*RSIZE); \ - rsave ( 8, 8*RSIZE); \ - rsave ( 9, 9*RSIZE); \ - rsave (10, 10*RSIZE); \ - rsave (11, 11*RSIZE); \ - rsave (12, 12*RSIZE); \ - rsave (13, 13*RSIZE); \ - rsave (14, 14*RSIZE); \ - rsave (15, 15*RSIZE); \ - rsave (16, 16*RSIZE); \ - rsave (17, 17*RSIZE); \ - rsave (18, 18*RSIZE); \ - rsave (19, 19*RSIZE); \ - rsave (20, 20*RSIZE); \ - rsave (21, 21*RSIZE); \ - rsave (22, 22*RSIZE); \ - rsave (23, 23*RSIZE); \ - rsave (24, 24*RSIZE); \ - rsave (25, 25*RSIZE); \ - rsave (26, 26*RSIZE); \ - rsave (27, 27*RSIZE); \ - rsave (28, 28*RSIZE); \ - rsave (29, 29*RSIZE); \ - rsave (30, 30*RSIZE); \ - rsave (31, 31*RSIZE); \ - rsave (67, 32*RSIZE); /* ap, used as temp for nip */ \ - rsave (65, 36*RSIZE); /* lr */ \ - rsave (70, 38*RSIZE) /* cr */ - -/* Describe where the FP regs are saved. */ -#define EH_FRAME_FP \ - rsave (32, 48*RSIZE + 0*8); \ - rsave (33, 48*RSIZE + 1*8); \ - rsave (34, 48*RSIZE + 2*8); \ - rsave (35, 48*RSIZE + 3*8); \ - rsave (36, 48*RSIZE + 4*8); \ - rsave (37, 48*RSIZE + 5*8); \ - rsave (38, 48*RSIZE + 6*8); \ - rsave (39, 48*RSIZE + 7*8); \ - rsave (40, 48*RSIZE + 8*8); \ - rsave (41, 48*RSIZE + 9*8); \ - rsave (42, 48*RSIZE + 10*8); \ - rsave (43, 48*RSIZE + 11*8); \ - rsave (44, 48*RSIZE + 12*8); \ - rsave (45, 48*RSIZE + 13*8); \ - rsave (46, 48*RSIZE + 14*8); \ - rsave (47, 48*RSIZE + 15*8); \ - rsave (48, 48*RSIZE + 16*8); \ - rsave (49, 48*RSIZE + 17*8); \ - rsave (50, 48*RSIZE + 18*8); \ - rsave (51, 48*RSIZE + 19*8); \ - rsave (52, 48*RSIZE + 20*8); \ - rsave (53, 48*RSIZE + 21*8); \ - rsave (54, 48*RSIZE + 22*8); \ - rsave (55, 48*RSIZE + 23*8); \ - rsave (56, 48*RSIZE + 24*8); \ - rsave (57, 48*RSIZE + 25*8); \ - rsave (58, 48*RSIZE + 26*8); \ - rsave (59, 48*RSIZE + 27*8); \ - rsave (60, 48*RSIZE + 28*8); \ - rsave (61, 48*RSIZE + 29*8); \ - rsave (62, 48*RSIZE + 30*8); \ - rsave (63, 48*RSIZE + 31*8) - -/* Describe where the VMX regs are saved. */ -#ifdef CONFIG_ALTIVEC -#define EH_FRAME_VMX \ - vsave_msr0 ( 0); \ - vsave_msr1 ( 1); \ - vsave_msr1 ( 2); \ - vsave_msr1 ( 3); \ - vsave_msr1 ( 4); \ - vsave_msr1 ( 5); \ - vsave_msr1 ( 6); \ - vsave_msr1 ( 7); \ - vsave_msr1 ( 8); \ - vsave_msr1 ( 9); \ - vsave_msr1 (10); \ - vsave_msr1 (11); \ - vsave_msr1 (12); \ - vsave_msr1 (13); \ - vsave_msr1 (14); \ - vsave_msr1 (15); \ - vsave_msr1 (16); \ - vsave_msr1 (17); \ - vsave_msr1 (18); \ - vsave_msr1 (19); \ - vsave_msr1 (20); \ - vsave_msr1 (21); \ - vsave_msr1 (22); \ - vsave_msr1 (23); \ - vsave_msr1 (24); \ - vsave_msr1 (25); \ - vsave_msr1 (26); \ - vsave_msr1 (27); \ - vsave_msr1 (28); \ - vsave_msr1 (29); \ - vsave_msr1 (30); \ - vsave_msr1 (31); \ - vsave_msr2 (33, 32*16+12); \ - vsave (32, 33*16) -#else -#define EH_FRAME_VMX -#endif - - .section .eh_frame,"a",@progbits -.Lcie: - .long .Lcie_end - .Lcie_start -.Lcie_start: - .long 0 /* CIE ID */ - .byte 1 /* Version number */ - .string "zR" /* NUL-terminated augmentation string */ - .uleb128 4 /* Code alignment factor */ - .sleb128 -8 /* Data alignment factor */ - .byte 67 /* Return address register column, ap */ - .uleb128 1 /* Augmentation value length */ - .byte 0x14 /* DW_EH_PE_pcrel | DW_EH_PE_udata8. */ - .byte 0x0c,1,0 /* DW_CFA_def_cfa: r1 ofs 0 */ - .balign 8 -.Lcie_end: - - .long .Lfde0_end - .Lfde0_start -.Lfde0_start: - .long .Lfde0_start - .Lcie /* CIE pointer. */ - .quad .Lsigrt_start - . /* PC start, length */ - .quad .Lsigrt_end - .Lsigrt_start - .uleb128 0 /* Augmentation */ - EH_FRAME_GEN - EH_FRAME_FP - EH_FRAME_VMX -# Do we really need to describe the frame at this point? ie. will -# we ever have some call chain that returns somewhere past the addi? -# I don't think so, since gcc doesn't support async signals. -# .byte 0x41 /* DW_CFA_advance_loc 1*4 */ -#undef PTREGS -#define PTREGS 168+56 -# EH_FRAME_GEN -# EH_FRAME_FP -# EH_FRAME_VMX - .balign 8 -.Lfde0_end: diff --git a/arch/ppc64/kernel/vdso64/vdso64.lds.S b/arch/ppc64/kernel/vdso64/vdso64.lds.S deleted file mode 100644 index 9cb28181da80..000000000000 --- a/arch/ppc64/kernel/vdso64/vdso64.lds.S +++ /dev/null @@ -1,113 +0,0 @@ -/* - * This is the infamous ld script for the 64 bits vdso - * library - */ -#include <asm/vdso.h> - -OUTPUT_FORMAT("elf64-powerpc", "elf64-powerpc", "elf64-powerpc") -OUTPUT_ARCH(powerpc:common64) -ENTRY(_start) - -SECTIONS -{ - . = VDSO64_LBASE + SIZEOF_HEADERS; - .hash : { *(.hash) } :text - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .gnu.version : { *(.gnu.version) } - .gnu.version_d : { *(.gnu.version_d) } - .gnu.version_r : { *(.gnu.version_r) } - - .note : { *(.note.*) } :text :note - - . = ALIGN (16); - .text : - { - *(.text .stub .text.* .gnu.linkonce.t.*) - *(.sfpr .glink) - } :text - PROVIDE (__etext = .); - PROVIDE (_etext = .); - PROVIDE (etext = .); - - /* Other stuff is appended to the text segment: */ - .rodata : { *(.rodata .rodata.* .gnu.linkonce.r.*) } - .rodata1 : { *(.rodata1) } - .eh_frame_hdr : { *(.eh_frame_hdr) } :text :eh_frame_hdr - .eh_frame : { KEEP (*(.eh_frame)) } :text - .gcc_except_table : { *(.gcc_except_table) } - - .opd ALIGN(8) : { KEEP (*(.opd)) } - .got ALIGN(8) : { *(.got .toc) } - .rela.dyn ALIGN(8) : { *(.rela.dyn) } - - .dynamic : { *(.dynamic) } :text :dynamic - - _end = .; - PROVIDE (end = .); - - /* Stabs debugging sections are here too - */ - .stab 0 : { *(.stab) } - .stabstr 0 : { *(.stabstr) } - .stab.excl 0 : { *(.stab.excl) } - .stab.exclstr 0 : { *(.stab.exclstr) } - .stab.index 0 : { *(.stab.index) } - .stab.indexstr 0 : { *(.stab.indexstr) } - .comment 0 : { *(.comment) } - /* DWARF debug sectio/ns. - Symbols in the DWARF debugging sections are relative to the beginning - of the section so we begin them at 0. */ - /* DWARF 1 */ - .debug 0 : { *(.debug) } - .line 0 : { *(.line) } - /* GNU DWARF 1 extensions */ - .debug_srcinfo 0 : { *(.debug_srcinfo) } - .debug_sfnames 0 : { *(.debug_sfnames) } - /* DWARF 1.1 and DWARF 2 */ - .debug_aranges 0 : { *(.debug_aranges) } - .debug_pubnames 0 : { *(.debug_pubnames) } - /* DWARF 2 */ - .debug_info 0 : { *(.debug_info .gnu.linkonce.wi.*) } - .debug_abbrev 0 : { *(.debug_abbrev) } - .debug_line 0 : { *(.debug_line) } - .debug_frame 0 : { *(.debug_frame) } - .debug_str 0 : { *(.debug_str) } - .debug_loc 0 : { *(.debug_loc) } - .debug_macinfo 0 : { *(.debug_macinfo) } - /* SGI/MIPS DWARF 2 extensions */ - .debug_weaknames 0 : { *(.debug_weaknames) } - .debug_funcnames 0 : { *(.debug_funcnames) } - .debug_typenames 0 : { *(.debug_typenames) } - .debug_varnames 0 : { *(.debug_varnames) } - - /DISCARD/ : { *(.note.GNU-stack) } - /DISCARD/ : { *(.branch_lt) } - /DISCARD/ : { *(.data .data.* .gnu.linkonce.d.*) } - /DISCARD/ : { *(.bss .sbss .dynbss .dynsbss) } -} - -PHDRS -{ - text PT_LOAD FILEHDR PHDRS FLAGS(5); /* PF_R|PF_X */ - note PT_NOTE FLAGS(4); /* PF_R */ - dynamic PT_DYNAMIC FLAGS(4); /* PF_R */ - eh_frame_hdr 0x6474e550; /* PT_GNU_EH_FRAME, but ld doesn't match the name */ -} - -/* - * This controls what symbols we export from the DSO. - */ -VERSION -{ - VDSO_VERSION_STRING { - global: - __kernel_datapage_offset; /* Has to be there for the kernel to find it */ - __kernel_get_syscall_map; - __kernel_gettimeofday; - __kernel_sync_dicache; - __kernel_sync_dicache_p5; - __kernel_sigtramp_rt64; - local: *; - }; -} diff --git a/arch/ppc64/kernel/vdso64/vdso64_wrapper.S b/arch/ppc64/kernel/vdso64/vdso64_wrapper.S deleted file mode 100644 index 771c2741c492..000000000000 --- a/arch/ppc64/kernel/vdso64/vdso64_wrapper.S +++ /dev/null @@ -1,13 +0,0 @@ -#include <linux/init.h> -#include <asm/page.h> - - .section ".data.page_aligned" - - .globl vdso64_start, vdso64_end - .balign PAGE_SIZE -vdso64_start: - .incbin "arch/ppc64/kernel/vdso64/vdso64.so" - .balign PAGE_SIZE -vdso64_end: - - .previous diff --git a/arch/ppc64/kernel/vmlinux.lds.S b/arch/ppc64/kernel/vmlinux.lds.S deleted file mode 100644 index 022f220e772f..000000000000 --- a/arch/ppc64/kernel/vmlinux.lds.S +++ /dev/null @@ -1,151 +0,0 @@ -#include <asm/page.h> -#include <asm-generic/vmlinux.lds.h> - -OUTPUT_ARCH(powerpc:common64) -jiffies = jiffies_64; -SECTIONS -{ - /* Sections to be discarded. */ - /DISCARD/ : { - *(.exitcall.exit) - } - - - /* Read-only sections, merged into text segment: */ - .text : { - *(.text .text.*) - SCHED_TEXT - LOCK_TEXT - KPROBES_TEXT - *(.fixup) - . = ALIGN(PAGE_SIZE); - _etext = .; - } - - __ex_table : { - __start___ex_table = .; - *(__ex_table) - __stop___ex_table = .; - } - - __bug_table : { - __start___bug_table = .; - *(__bug_table) - __stop___bug_table = .; - } - - __ftr_fixup : { - __start___ftr_fixup = .; - *(__ftr_fixup) - __stop___ftr_fixup = .; - } - - RODATA - - - /* will be freed after init */ - . = ALIGN(PAGE_SIZE); - __init_begin = .; - - .init.text : { - _sinittext = .; - *(.init.text) - _einittext = .; - } - - .init.data : { - *(.init.data) - } - - . = ALIGN(16); - .init.setup : { - __setup_start = .; - *(.init.setup) - __setup_end = .; - } - - .initcall.init : { - __initcall_start = .; - *(.initcall1.init) - *(.initcall2.init) - *(.initcall3.init) - *(.initcall4.init) - *(.initcall5.init) - *(.initcall6.init) - *(.initcall7.init) - __initcall_end = .; - } - - .con_initcall.init : { - __con_initcall_start = .; - *(.con_initcall.init) - __con_initcall_end = .; - } - - SECURITY_INIT - - . = ALIGN(PAGE_SIZE); - .init.ramfs : { - __initramfs_start = .; - *(.init.ramfs) - __initramfs_end = .; - } - - .data.percpu : { - __per_cpu_start = .; - *(.data.percpu) - __per_cpu_end = .; - } - - . = ALIGN(PAGE_SIZE); - . = ALIGN(16384); - __init_end = .; - /* freed after init ends here */ - - - /* Read/write sections */ - . = ALIGN(PAGE_SIZE); - . = ALIGN(16384); - _sdata = .; - /* The initial task and kernel stack */ - .data.init_task : { - *(.data.init_task) - } - - . = ALIGN(PAGE_SIZE); - .data.page_aligned : { - *(.data.page_aligned) - } - - .data.cacheline_aligned : { - *(.data.cacheline_aligned) - } - - .data : { - *(.data .data.rel* .toc1) - *(.branch_lt) - } - - .opd : { - *(.opd) - } - - .got : { - __toc_start = .; - *(.got) - *(.toc) - . = ALIGN(PAGE_SIZE); - _edata = .; - } - - - . = ALIGN(PAGE_SIZE); - .bss : { - __bss_start = .; - *(.bss) - __bss_stop = .; - } - - . = ALIGN(PAGE_SIZE); - _end = . ; -} diff --git a/arch/ppc64/xmon/privinst.h b/arch/ppc64/xmon/privinst.h deleted file mode 100644 index 02eb40dac0b3..000000000000 --- a/arch/ppc64/xmon/privinst.h +++ /dev/null @@ -1,64 +0,0 @@ -/* - * Copyright (C) 1996 Paul Mackerras. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#define GETREG(reg) \ - static inline unsigned long get_ ## reg (void) \ - { unsigned long ret; asm volatile ("mf" #reg " %0" : "=r" (ret) :); return ret; } - -#define SETREG(reg) \ - static inline void set_ ## reg (unsigned long val) \ - { asm volatile ("mt" #reg " %0" : : "r" (val)); } - -GETREG(msr) -SETREG(msrd) -GETREG(cr) - -#define GSETSPR(n, name) \ - static inline long get_ ## name (void) \ - { long ret; asm volatile ("mfspr %0," #n : "=r" (ret) : ); return ret; } \ - static inline void set_ ## name (long val) \ - { asm volatile ("mtspr " #n ",%0" : : "r" (val)); } - -GSETSPR(0, mq) -GSETSPR(1, xer) -GSETSPR(4, rtcu) -GSETSPR(5, rtcl) -GSETSPR(8, lr) -GSETSPR(9, ctr) -GSETSPR(18, dsisr) -GSETSPR(19, dar) -GSETSPR(22, dec) -GSETSPR(25, sdr1) -GSETSPR(26, srr0) -GSETSPR(27, srr1) -GSETSPR(272, sprg0) -GSETSPR(273, sprg1) -GSETSPR(274, sprg2) -GSETSPR(275, sprg3) -GSETSPR(282, ear) -GSETSPR(287, pvr) -GSETSPR(1008, hid0) -GSETSPR(1009, hid1) -GSETSPR(1010, iabr) -GSETSPR(1023, pir) - -static inline void store_inst(void *p) -{ - asm volatile ("dcbst 0,%0; sync; icbi 0,%0; isync" : : "r" (p)); -} - -static inline void cflush(void *p) -{ - asm volatile ("dcbf 0,%0; icbi 0,%0" : : "r" (p)); -} - -static inline void cinval(void *p) -{ - asm volatile ("dcbi 0,%0; icbi 0,%0" : : "r" (p)); -} |
