summaryrefslogtreecommitdiffstats
path: root/arch/ppc/syslib
diff options
context:
space:
mode:
Diffstat (limited to 'arch/ppc/syslib')
-rw-r--r--arch/ppc/syslib/Makefile7
-rw-r--r--arch/ppc/syslib/cpm2_common.c2
-rw-r--r--arch/ppc/syslib/indirect_pci.c1
-rw-r--r--arch/ppc/syslib/ipic.c16
-rw-r--r--arch/ppc/syslib/m8260_pci.c193
-rw-r--r--arch/ppc/syslib/m8260_pci.h76
-rw-r--r--arch/ppc/syslib/m8260_pci_erratum9.c10
-rw-r--r--arch/ppc/syslib/m8260_setup.c11
-rw-r--r--arch/ppc/syslib/m82xx_pci.c383
-rw-r--r--arch/ppc/syslib/m82xx_pci.h92
-rw-r--r--arch/ppc/syslib/mpc10x_common.c203
-rw-r--r--arch/ppc/syslib/mpc85xx_devices.c187
-rw-r--r--arch/ppc/syslib/mpc85xx_sys.c105
-rw-r--r--arch/ppc/syslib/mv64x60.c1
-rw-r--r--arch/ppc/syslib/mv64x60_win.c1
-rw-r--r--arch/ppc/syslib/ocp.c2
-rw-r--r--arch/ppc/syslib/of_device.c2
-rw-r--r--arch/ppc/syslib/open_pic.c5
-rw-r--r--arch/ppc/syslib/open_pic2.c1
-rw-r--r--arch/ppc/syslib/ppc4xx_kgdb.c124
-rw-r--r--arch/ppc/syslib/ppc83xx_setup.c29
-rw-r--r--arch/ppc/syslib/ppc85xx_setup.c19
-rw-r--r--arch/ppc/syslib/prom_init.c10
23 files changed, 1009 insertions, 471 deletions
diff --git a/arch/ppc/syslib/Makefile b/arch/ppc/syslib/Makefile
index dd418ea3426c..dec5bf4f6879 100644
--- a/arch/ppc/syslib/Makefile
+++ b/arch/ppc/syslib/Makefile
@@ -81,7 +81,7 @@ obj-$(CONFIG_SBC82xx) += todc_time.o
obj-$(CONFIG_SPRUCE) += cpc700_pic.o indirect_pci.o pci_auto.o \
todc_time.o
obj-$(CONFIG_8260) += m8260_setup.o
-obj-$(CONFIG_PCI_8260) += m8260_pci.o indirect_pci.o
+obj-$(CONFIG_PCI_8260) += m82xx_pci.o indirect_pci.o pci_auto.o
obj-$(CONFIG_8260_PCI9) += m8260_pci_erratum9.o
obj-$(CONFIG_CPM2) += cpm2_common.o cpm2_pic.o
ifeq ($(CONFIG_PPC_GEN550),y)
@@ -92,12 +92,12 @@ ifeq ($(CONFIG_SERIAL_MPSC_CONSOLE),y)
obj-$(CONFIG_SERIAL_TEXT_DEBUG) += mv64x60_dbg.o
endif
obj-$(CONFIG_BOOTX_TEXT) += btext.o
-obj-$(CONFIG_MPC10X_BRIDGE) += mpc10x_common.o indirect_pci.o
+obj-$(CONFIG_MPC10X_BRIDGE) += mpc10x_common.o indirect_pci.o ppc_sys.o
obj-$(CONFIG_MPC10X_OPENPIC) += open_pic.o
obj-$(CONFIG_40x) += dcr.o
obj-$(CONFIG_BOOKE) += dcr.o
obj-$(CONFIG_85xx) += open_pic.o ppc85xx_common.o ppc85xx_setup.o \
- ppc_sys.o mpc85xx_sys.o \
+ ppc_sys.o i8259.o mpc85xx_sys.o \
mpc85xx_devices.o
ifeq ($(CONFIG_85xx),y)
obj-$(CONFIG_PCI) += indirect_pci.o pci_auto.o
@@ -107,6 +107,7 @@ obj-$(CONFIG_83xx) += ipic.o ppc83xx_setup.o ppc_sys.o \
ifeq ($(CONFIG_83xx),y)
obj-$(CONFIG_PCI) += indirect_pci.o pci_auto.o
endif
+obj-$(CONFIG_MPC8548_CDS) += todc_time.o
obj-$(CONFIG_MPC8555_CDS) += todc_time.o
obj-$(CONFIG_PPC_MPC52xx) += mpc52xx_setup.o mpc52xx_pic.o \
mpc52xx_sys.o mpc52xx_devices.o ppc_sys.o
diff --git a/arch/ppc/syslib/cpm2_common.c b/arch/ppc/syslib/cpm2_common.c
index ea5e77080e8d..4c19a4ac7163 100644
--- a/arch/ppc/syslib/cpm2_common.c
+++ b/arch/ppc/syslib/cpm2_common.c
@@ -21,8 +21,8 @@
#include <linux/string.h>
#include <linux/mm.h>
#include <linux/interrupt.h>
-#include <linux/bootmem.h>
#include <linux/module.h>
+#include <asm/io.h>
#include <asm/irq.h>
#include <asm/mpc8260.h>
#include <asm/page.h>
diff --git a/arch/ppc/syslib/indirect_pci.c b/arch/ppc/syslib/indirect_pci.c
index a5a752609e2c..e71488469704 100644
--- a/arch/ppc/syslib/indirect_pci.c
+++ b/arch/ppc/syslib/indirect_pci.c
@@ -14,7 +14,6 @@
#include <linux/delay.h>
#include <linux/string.h>
#include <linux/init.h>
-#include <linux/bootmem.h>
#include <asm/io.h>
#include <asm/prom.h>
diff --git a/arch/ppc/syslib/ipic.c b/arch/ppc/syslib/ipic.c
index acb2cde3171f..8f01e0f1d847 100644
--- a/arch/ppc/syslib/ipic.c
+++ b/arch/ppc/syslib/ipic.c
@@ -79,7 +79,7 @@ static struct ipic_info ipic_info[] = {
.prio_mask = 7,
},
[17] = {
- .pend = IPIC_SIPNR_H,
+ .pend = IPIC_SEPNR,
.mask = IPIC_SEMSR,
.prio = IPIC_SMPRR_A,
.force = IPIC_SEFCR,
@@ -87,7 +87,7 @@ static struct ipic_info ipic_info[] = {
.prio_mask = 5,
},
[18] = {
- .pend = IPIC_SIPNR_H,
+ .pend = IPIC_SEPNR,
.mask = IPIC_SEMSR,
.prio = IPIC_SMPRR_A,
.force = IPIC_SEFCR,
@@ -95,7 +95,7 @@ static struct ipic_info ipic_info[] = {
.prio_mask = 6,
},
[19] = {
- .pend = IPIC_SIPNR_H,
+ .pend = IPIC_SEPNR,
.mask = IPIC_SEMSR,
.prio = IPIC_SMPRR_A,
.force = IPIC_SEFCR,
@@ -103,7 +103,7 @@ static struct ipic_info ipic_info[] = {
.prio_mask = 7,
},
[20] = {
- .pend = IPIC_SIPNR_H,
+ .pend = IPIC_SEPNR,
.mask = IPIC_SEMSR,
.prio = IPIC_SMPRR_B,
.force = IPIC_SEFCR,
@@ -111,7 +111,7 @@ static struct ipic_info ipic_info[] = {
.prio_mask = 4,
},
[21] = {
- .pend = IPIC_SIPNR_H,
+ .pend = IPIC_SEPNR,
.mask = IPIC_SEMSR,
.prio = IPIC_SMPRR_B,
.force = IPIC_SEFCR,
@@ -119,7 +119,7 @@ static struct ipic_info ipic_info[] = {
.prio_mask = 5,
},
[22] = {
- .pend = IPIC_SIPNR_H,
+ .pend = IPIC_SEPNR,
.mask = IPIC_SEMSR,
.prio = IPIC_SMPRR_B,
.force = IPIC_SEFCR,
@@ -127,7 +127,7 @@ static struct ipic_info ipic_info[] = {
.prio_mask = 6,
},
[23] = {
- .pend = IPIC_SIPNR_H,
+ .pend = IPIC_SEPNR,
.mask = IPIC_SEMSR,
.prio = IPIC_SMPRR_B,
.force = IPIC_SEFCR,
@@ -479,7 +479,7 @@ void __init ipic_init(phys_addr_t phys_addr,
temp = 0;
for (i = 0 ; i < senses_count ; i++) {
if ((senses[i] & IRQ_SENSE_MASK) == IRQ_SENSE_EDGE) {
- temp |= 1 << (16 - i);
+ temp |= 1 << (15 - i);
if (i != 0)
irq_desc[i + irq_offset + MPC83xx_IRQ_EXT1 - 1].status = 0;
else
diff --git a/arch/ppc/syslib/m8260_pci.c b/arch/ppc/syslib/m8260_pci.c
deleted file mode 100644
index 057cc3f8ff37..000000000000
--- a/arch/ppc/syslib/m8260_pci.c
+++ /dev/null
@@ -1,193 +0,0 @@
-/*
- * (C) Copyright 2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2004 Red Hat, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
-
-#include <asm/byteorder.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/uaccess.h>
-#include <asm/machdep.h>
-#include <asm/pci-bridge.h>
-#include <asm/immap_cpm2.h>
-#include <asm/mpc8260.h>
-
-#include "m8260_pci.h"
-
-
-/* PCI bus configuration registers.
- */
-
-static void __init m8260_setup_pci(struct pci_controller *hose)
-{
- volatile cpm2_map_t *immap = cpm2_immr;
- unsigned long pocmr;
- u16 tempShort;
-
-#ifndef CONFIG_ATC /* already done in U-Boot */
- /*
- * Setting required to enable IRQ1-IRQ7 (SIUMCR [DPPC]),
- * and local bus for PCI (SIUMCR [LBPC]).
- */
- immap->im_siu_conf.siu_82xx.sc_siumcr = 0x00640000;
-#endif
-
- /* Make PCI lowest priority */
- /* Each 4 bits is a device bus request and the MS 4bits
- is highest priority */
- /* Bus 4bit value
- --- ----------
- CPM high 0b0000
- CPM middle 0b0001
- CPM low 0b0010
- PCI reguest 0b0011
- Reserved 0b0100
- Reserved 0b0101
- Internal Core 0b0110
- External Master 1 0b0111
- External Master 2 0b1000
- External Master 3 0b1001
- The rest are reserved */
- immap->im_siu_conf.siu_82xx.sc_ppc_alrh = 0x61207893;
-
- /* Park bus on core while modifying PCI Bus accesses */
- immap->im_siu_conf.siu_82xx.sc_ppc_acr = 0x6;
-
- /*
- * Set up master window that allows the CPU to access PCI space. This
- * window is set up using the first SIU PCIBR registers.
- */
- immap->im_memctl.memc_pcimsk0 = MPC826x_PCI_MASK;
- immap->im_memctl.memc_pcibr0 = MPC826x_PCI_BASE | PCIBR_ENABLE;
-
- /* Disable machine check on no response or target abort */
- immap->im_pci.pci_emr = cpu_to_le32(0x1fe7);
- /* Release PCI RST (by default the PCI RST signal is held low) */
- immap->im_pci.pci_gcr = cpu_to_le32(PCIGCR_PCI_BUS_EN);
-
- /* give it some time */
- mdelay(1);
-
- /*
- * Set up master window that allows the CPU to access PCI Memory (prefetch)
- * space. This window is set up using the first set of Outbound ATU registers.
- */
- immap->im_pci.pci_potar0 = cpu_to_le32(MPC826x_PCI_LOWER_MEM >> 12);
- immap->im_pci.pci_pobar0 = cpu_to_le32((MPC826x_PCI_LOWER_MEM - MPC826x_PCI_MEM_OFFSET) >> 12);
- pocmr = ((MPC826x_PCI_UPPER_MEM - MPC826x_PCI_LOWER_MEM) >> 12) ^ 0xfffff;
- immap->im_pci.pci_pocmr0 = cpu_to_le32(pocmr | POCMR_ENABLE | POCMR_PREFETCH_EN);
-
- /*
- * Set up master window that allows the CPU to access PCI Memory (non-prefetch)
- * space. This window is set up using the second set of Outbound ATU registers.
- */
- immap->im_pci.pci_potar1 = cpu_to_le32(MPC826x_PCI_LOWER_MMIO >> 12);
- immap->im_pci.pci_pobar1 = cpu_to_le32((MPC826x_PCI_LOWER_MMIO - MPC826x_PCI_MMIO_OFFSET) >> 12);
- pocmr = ((MPC826x_PCI_UPPER_MMIO - MPC826x_PCI_LOWER_MMIO) >> 12) ^ 0xfffff;
- immap->im_pci.pci_pocmr1 = cpu_to_le32(pocmr | POCMR_ENABLE);
-
- /*
- * Set up master window that allows the CPU to access PCI IO space. This window
- * is set up using the third set of Outbound ATU registers.
- */
- immap->im_pci.pci_potar2 = cpu_to_le32(MPC826x_PCI_IO_BASE >> 12);
- immap->im_pci.pci_pobar2 = cpu_to_le32(MPC826x_PCI_LOWER_IO >> 12);
- pocmr = ((MPC826x_PCI_UPPER_IO - MPC826x_PCI_LOWER_IO) >> 12) ^ 0xfffff;
- immap->im_pci.pci_pocmr2 = cpu_to_le32(pocmr | POCMR_ENABLE | POCMR_PCI_IO);
-
- /*
- * Set up slave window that allows PCI masters to access MPC826x local memory.
- * This window is set up using the first set of Inbound ATU registers
- */
-
- immap->im_pci.pci_pitar0 = cpu_to_le32(MPC826x_PCI_SLAVE_MEM_LOCAL >> 12);
- immap->im_pci.pci_pibar0 = cpu_to_le32(MPC826x_PCI_SLAVE_MEM_BUS >> 12);
- pocmr = ((MPC826x_PCI_SLAVE_MEM_SIZE-1) >> 12) ^ 0xfffff;
- immap->im_pci.pci_picmr0 = cpu_to_le32(pocmr | PICMR_ENABLE | PICMR_PREFETCH_EN);
-
- /* See above for description - puts PCI request as highest priority */
- immap->im_siu_conf.siu_82xx.sc_ppc_alrh = 0x03124567;
-
- /* Park the bus on the PCI */
- immap->im_siu_conf.siu_82xx.sc_ppc_acr = PPC_ACR_BUS_PARK_PCI;
-
- /* Host mode - specify the bridge as a host-PCI bridge */
- early_write_config_word(hose, 0, 0, PCI_CLASS_DEVICE, PCI_CLASS_BRIDGE_HOST);
-
- /* Enable the host bridge to be a master on the PCI bus, and to act as a PCI memory target */
- early_read_config_word(hose, 0, 0, PCI_COMMAND, &tempShort);
- early_write_config_word(hose, 0, 0, PCI_COMMAND,
- tempShort | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
-}
-
-void __init m8260_find_bridges(void)
-{
- extern int pci_assign_all_busses;
- struct pci_controller * hose;
-
- pci_assign_all_busses = 1;
-
- hose = pcibios_alloc_controller();
-
- if (!hose)
- return;
-
- ppc_md.pci_swizzle = common_swizzle;
-
- hose->first_busno = 0;
- hose->bus_offset = 0;
- hose->last_busno = 0xff;
-
- setup_m8260_indirect_pci(hose,
- (unsigned long)&cpm2_immr->im_pci.pci_cfg_addr,
- (unsigned long)&cpm2_immr->im_pci.pci_cfg_data);
-
- m8260_setup_pci(hose);
- hose->pci_mem_offset = MPC826x_PCI_MEM_OFFSET;
-
- hose->io_base_virt = ioremap(MPC826x_PCI_IO_BASE,
- MPC826x_PCI_IO_SIZE);
- isa_io_base = (unsigned long) hose->io_base_virt;
-
- /* setup resources */
- pci_init_resource(&hose->mem_resources[0],
- MPC826x_PCI_LOWER_MEM,
- MPC826x_PCI_UPPER_MEM,
- IORESOURCE_MEM|IORESOURCE_PREFETCH, "PCI prefetchable memory");
-
- pci_init_resource(&hose->mem_resources[1],
- MPC826x_PCI_LOWER_MMIO,
- MPC826x_PCI_UPPER_MMIO,
- IORESOURCE_MEM, "PCI memory");
-
- pci_init_resource(&hose->io_resource,
- MPC826x_PCI_LOWER_IO,
- MPC826x_PCI_UPPER_IO,
- IORESOURCE_IO, "PCI I/O");
-}
diff --git a/arch/ppc/syslib/m8260_pci.h b/arch/ppc/syslib/m8260_pci.h
deleted file mode 100644
index d1352120acd7..000000000000
--- a/arch/ppc/syslib/m8260_pci.h
+++ /dev/null
@@ -1,76 +0,0 @@
-
-#ifndef _PPC_KERNEL_M8260_PCI_H
-#define _PPC_KERNEL_M8260_PCI_H
-
-#include <asm/m8260_pci.h>
-
-/*
- * Local->PCI map (from CPU) controlled by
- * MPC826x master window
- *
- * 0x80000000 - 0xBFFFFFFF Total CPU2PCI space PCIBR0
- *
- * 0x80000000 - 0x9FFFFFFF PCI Mem with prefetch (Outbound ATU #1)
- * 0xA0000000 - 0xAFFFFFFF PCI Mem w/o prefetch (Outbound ATU #2)
- * 0xB0000000 - 0xB0FFFFFF 32-bit PCI IO (Outbound ATU #3)
- *
- * PCI->Local map (from PCI)
- * MPC826x slave window controlled by
- *
- * 0x00000000 - 0x07FFFFFF MPC826x local memory (Inbound ATU #1)
- */
-
-/*
- * Slave window that allows PCI masters to access MPC826x local memory.
- * This window is set up using the first set of Inbound ATU registers
- */
-
-#ifndef MPC826x_PCI_SLAVE_MEM_LOCAL
-#define MPC826x_PCI_SLAVE_MEM_LOCAL (((struct bd_info *)__res)->bi_memstart)
-#define MPC826x_PCI_SLAVE_MEM_BUS (((struct bd_info *)__res)->bi_memstart)
-#define MPC826x_PCI_SLAVE_MEM_SIZE (((struct bd_info *)__res)->bi_memsize)
-#endif
-
-/*
- * This is the window that allows the CPU to access PCI address space.
- * It will be setup with the SIU PCIBR0 register. All three PCI master
- * windows, which allow the CPU to access PCI prefetch, non prefetch,
- * and IO space (see below), must all fit within this window.
- */
-#ifndef MPC826x_PCI_BASE
-#define MPC826x_PCI_BASE 0x80000000
-#define MPC826x_PCI_MASK 0xc0000000
-#endif
-
-#ifndef MPC826x_PCI_LOWER_MEM
-#define MPC826x_PCI_LOWER_MEM 0x80000000
-#define MPC826x_PCI_UPPER_MEM 0x9fffffff
-#define MPC826x_PCI_MEM_OFFSET 0x00000000
-#endif
-
-#ifndef MPC826x_PCI_LOWER_MMIO
-#define MPC826x_PCI_LOWER_MMIO 0xa0000000
-#define MPC826x_PCI_UPPER_MMIO 0xafffffff
-#define MPC826x_PCI_MMIO_OFFSET 0x00000000
-#endif
-
-#ifndef MPC826x_PCI_LOWER_IO
-#define MPC826x_PCI_LOWER_IO 0x00000000
-#define MPC826x_PCI_UPPER_IO 0x00ffffff
-#define MPC826x_PCI_IO_BASE 0xb0000000
-#define MPC826x_PCI_IO_SIZE 0x01000000
-#endif
-
-#ifndef _IO_BASE
-#define _IO_BASE isa_io_base
-#endif
-
-#ifdef CONFIG_8260_PCI9
-struct pci_controller;
-extern void setup_m8260_indirect_pci(struct pci_controller* hose,
- u32 cfg_addr, u32 cfg_data);
-#else
-#define setup_m8260_indirect_pci setup_indirect_pci
-#endif
-
-#endif /* _PPC_KERNEL_M8260_PCI_H */
diff --git a/arch/ppc/syslib/m8260_pci_erratum9.c b/arch/ppc/syslib/m8260_pci_erratum9.c
index 9c0582d639e0..1dc7e4e1d491 100644
--- a/arch/ppc/syslib/m8260_pci_erratum9.c
+++ b/arch/ppc/syslib/m8260_pci_erratum9.c
@@ -31,7 +31,7 @@
#include <asm/immap_cpm2.h>
#include <asm/cpm2.h>
-#include "m8260_pci.h"
+#include "m82xx_pci.h"
#ifdef CONFIG_8260_PCI9
/*#include <asm/mpc8260_pci9.h>*/ /* included in asm/io.h */
@@ -248,11 +248,11 @@ EXPORT_SYMBOL(idma_pci9_read_le);
static inline int is_pci_mem(unsigned long addr)
{
- if (addr >= MPC826x_PCI_LOWER_MMIO &&
- addr <= MPC826x_PCI_UPPER_MMIO)
+ if (addr >= M82xx_PCI_LOWER_MMIO &&
+ addr <= M82xx_PCI_UPPER_MMIO)
return 1;
- if (addr >= MPC826x_PCI_LOWER_MEM &&
- addr <= MPC826x_PCI_UPPER_MEM)
+ if (addr >= M82xx_PCI_LOWER_MEM &&
+ addr <= M82xx_PCI_UPPER_MEM)
return 1;
return 0;
}
diff --git a/arch/ppc/syslib/m8260_setup.c b/arch/ppc/syslib/m8260_setup.c
index 23ea3f694de2..fda75d79050c 100644
--- a/arch/ppc/syslib/m8260_setup.c
+++ b/arch/ppc/syslib/m8260_setup.c
@@ -34,7 +34,8 @@
unsigned char __res[sizeof(bd_t)];
extern void cpm2_reset(void);
-extern void m8260_find_bridges(void);
+extern void pq2_find_bridges(void);
+extern void pq2pci_init_irq(void);
extern void idma_pci9_init(void);
/* Place-holder for board-specific init */
@@ -56,7 +57,7 @@ m8260_setup_arch(void)
idma_pci9_init();
#endif
#ifdef CONFIG_PCI_8260
- m8260_find_bridges();
+ pq2_find_bridges();
#endif
#ifdef CONFIG_BLK_DEV_INITRD
if (initrd_start)
@@ -173,6 +174,12 @@ m8260_init_IRQ(void)
* in case the boot rom changed something on us.
*/
cpm2_immr->im_intctl.ic_siprr = 0x05309770;
+
+#if defined(CONFIG_PCI) && (defined(CONFIG_ADS8272) || defined(CONFIG_PQ2FADS))
+ /* Initialize stuff for the 82xx CPLD IC and install demux */
+ pq2pci_init_irq();
+#endif
+
}
/*
diff --git a/arch/ppc/syslib/m82xx_pci.c b/arch/ppc/syslib/m82xx_pci.c
new file mode 100644
index 000000000000..5e7a7edcea74
--- /dev/null
+++ b/arch/ppc/syslib/m82xx_pci.c
@@ -0,0 +1,383 @@
+/*
+ *
+ * (C) Copyright 2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2004 Red Hat, Inc.
+ *
+ * 2005 (c) MontaVista Software, Inc.
+ * Vitaly Bordug <vbordug@ru.mvista.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+
+#include <asm/byteorder.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+#include <asm/machdep.h>
+#include <asm/pci-bridge.h>
+#include <asm/immap_cpm2.h>
+#include <asm/mpc8260.h>
+#include <asm/cpm2.h>
+
+#include "m82xx_pci.h"
+
+/*
+ * Interrupt routing
+ */
+
+static inline int
+pq2pci_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
+{
+ static char pci_irq_table[][4] =
+ /*
+ * PCI IDSEL/INTPIN->INTLINE
+ * A B C D
+ */
+ {
+ { PIRQA, PIRQB, PIRQC, PIRQD }, /* IDSEL 22 - PCI slot 0 */
+ { PIRQD, PIRQA, PIRQB, PIRQC }, /* IDSEL 23 - PCI slot 1 */
+ { PIRQC, PIRQD, PIRQA, PIRQB }, /* IDSEL 24 - PCI slot 2 */
+ };
+
+ const long min_idsel = 22, max_idsel = 24, irqs_per_slot = 4;
+ return PCI_IRQ_TABLE_LOOKUP;
+}
+
+static void
+pq2pci_mask_irq(unsigned int irq)
+{
+ int bit = irq - NR_CPM_INTS;
+
+ *(volatile unsigned long *) PCI_INT_MASK_REG |= (1 << (31 - bit));
+ return;
+}
+
+static void
+pq2pci_unmask_irq(unsigned int irq)
+{
+ int bit = irq - NR_CPM_INTS;
+
+ *(volatile unsigned long *) PCI_INT_MASK_REG &= ~(1 << (31 - bit));
+ return;
+}
+
+static void
+pq2pci_mask_and_ack(unsigned int irq)
+{
+ int bit = irq - NR_CPM_INTS;
+
+ *(volatile unsigned long *) PCI_INT_MASK_REG |= (1 << (31 - bit));
+ return;
+}
+
+static void
+pq2pci_end_irq(unsigned int irq)
+{
+ int bit = irq - NR_CPM_INTS;
+
+ *(volatile unsigned long *) PCI_INT_MASK_REG &= ~(1 << (31 - bit));
+ return;
+}
+
+struct hw_interrupt_type pq2pci_ic = {
+ "PQ2 PCI",
+ NULL,
+ NULL,
+ pq2pci_unmask_irq,
+ pq2pci_mask_irq,
+ pq2pci_mask_and_ack,
+ pq2pci_end_irq,
+ 0
+};
+
+static irqreturn_t
+pq2pci_irq_demux(int irq, void *dev_id, struct pt_regs *regs)
+{
+ unsigned long stat, mask, pend;
+ int bit;
+
+ for(;;) {
+ stat = *(volatile unsigned long *) PCI_INT_STAT_REG;
+ mask = *(volatile unsigned long *) PCI_INT_MASK_REG;
+ pend = stat & ~mask & 0xf0000000;
+ if (!pend)
+ break;
+ for (bit = 0; pend != 0; ++bit, pend <<= 1) {
+ if (pend & 0x80000000)
+ __do_IRQ(NR_CPM_INTS + bit, regs);
+ }
+ }
+
+ return IRQ_HANDLED;
+}
+
+static struct irqaction pq2pci_irqaction = {
+ .handler = pq2pci_irq_demux,
+ .flags = SA_INTERRUPT,
+ .mask = CPU_MASK_NONE,
+ .name = "PQ2 PCI cascade",
+};
+
+
+void
+pq2pci_init_irq(void)
+{
+ int irq;
+ volatile cpm2_map_t *immap = cpm2_immr;
+#if defined CONFIG_ADS8272
+ /* configure chip select for PCI interrupt controller */
+ immap->im_memctl.memc_br3 = PCI_INT_STAT_REG | 0x00001801;
+ immap->im_memctl.memc_or3 = 0xffff8010;
+#elif defined CONFIG_PQ2FADS
+ immap->im_memctl.memc_br8 = PCI_INT_STAT_REG | 0x00001801;
+ immap->im_memctl.memc_or8 = 0xffff8010;
+#endif
+ for (irq = NR_CPM_INTS; irq < NR_CPM_INTS + 4; irq++)
+ irq_desc[irq].handler = &pq2pci_ic;
+
+ /* make PCI IRQ level sensitive */
+ immap->im_intctl.ic_siexr &=
+ ~(1 << (14 - (PCI_INT_TO_SIU - SIU_INT_IRQ1)));
+
+ /* mask all PCI interrupts */
+ *(volatile unsigned long *) PCI_INT_MASK_REG |= 0xfff00000;
+
+ /* install the demultiplexer for the PCI cascade interrupt */
+ setup_irq(PCI_INT_TO_SIU, &pq2pci_irqaction);
+ return;
+}
+
+static int
+pq2pci_exclude_device(u_char bus, u_char devfn)
+{
+ return PCIBIOS_SUCCESSFUL;
+}
+
+/* PCI bus configuration registers.
+ */
+static void
+pq2ads_setup_pci(struct pci_controller *hose)
+{
+ __u32 val;
+ volatile cpm2_map_t *immap = cpm2_immr;
+ bd_t* binfo = (bd_t*) __res;
+ u32 sccr = immap->im_clkrst.car_sccr;
+ uint pci_div,freq,time;
+ /* PCI int lowest prio */
+ /* Each 4 bits is a device bus request and the MS 4bits
+ is highest priority */
+ /* Bus 4bit value
+ --- ----------
+ CPM high 0b0000
+ CPM middle 0b0001
+ CPM low 0b0010
+ PCI reguest 0b0011
+ Reserved 0b0100
+ Reserved 0b0101
+ Internal Core 0b0110
+ External Master 1 0b0111
+ External Master 2 0b1000
+ External Master 3 0b1001
+ The rest are reserved
+ */
+ immap->im_siu_conf.siu_82xx.sc_ppc_alrh = 0x61207893;
+ /* park bus on core */
+ immap->im_siu_conf.siu_82xx.sc_ppc_acr = PPC_ACR_BUS_PARK_CORE;
+ /*
+ * Set up master windows that allow the CPU to access PCI space. These
+ * windows are set up using the two SIU PCIBR registers.
+ */
+
+ immap->im_memctl.memc_pcimsk0 = M82xx_PCI_PRIM_WND_SIZE;
+ immap->im_memctl.memc_pcibr0 = M82xx_PCI_PRIM_WND_BASE | PCIBR_ENABLE;
+
+#ifdef M82xx_PCI_SEC_WND_SIZE
+ immap->im_memctl.memc_pcimsk1 = M82xx_PCI_SEC_WND_SIZE;
+ immap->im_memctl.memc_pcibr1 = M82xx_PCI_SEC_WND_BASE | PCIBR_ENABLE;
+#endif
+
+#if defined CONFIG_ADS8272
+ immap->im_siu_conf.siu_82xx.sc_siumcr =
+ (immap->im_siu_conf.siu_82xx.sc_siumcr &
+ ~(SIUMCR_BBD | SIUMCR_ESE | SIUMCR_PBSE |
+ SIUMCR_CDIS | SIUMCR_DPPC11 | SIUMCR_L2CPC11 |
+ SIUMCR_LBPC11 | SIUMCR_APPC11 |
+ SIUMCR_CS10PC11 | SIUMCR_BCTLC11 | SIUMCR_MMR11)) |
+ SIUMCR_DPPC11 | SIUMCR_L2CPC01 | SIUMCR_LBPC00 |
+ SIUMCR_APPC10 | SIUMCR_CS10PC00 |
+ SIUMCR_BCTLC00 | SIUMCR_MMR11 ;
+
+#elif defined CONFIG_PQ2FADS
+ /*
+ * Setting required to enable IRQ1-IRQ7 (SIUMCR [DPPC]),
+ * and local bus for PCI (SIUMCR [LBPC]).
+ */
+ immap->im_siu_conf.siu_82xx.sc_siumcr = (immap->im_siu_conf.sc_siumcr &
+ ~(SIUMCR_L2PC11 | SIUMCR_LBPC11 | SIUMCR_CS10PC11 | SIUMCR_APPC11) |
+ SIUMCR_BBD | SIUMCR_LBPC01 | SIUMCR_DPPC11 | SIUMCR_APPC10;
+#endif
+ /* Enable PCI */
+ immap->im_pci.pci_gcr = cpu_to_le32(PCIGCR_PCI_BUS_EN);
+
+ pci_div = ( (sccr & SCCR_PCI_MODCK) ? 2 : 1) *
+ ( ( (sccr & SCCR_PCIDF_MSK) >> SCCR_PCIDF_SHIFT) + 1);
+ freq = (uint)((2*binfo->bi_cpmfreq)/(pci_div));
+ time = (int)666666/freq;
+ /* due to PCI Local Bus spec, some devices needs to wait such a long
+ time after RST deassertion. More specifically, 0.508s for 66MHz & twice more for 33 */
+ printk("%s: The PCI bus is %d Mhz.\nWaiting %s after deasserting RST...\n",__FILE__,freq,
+ (time==1) ? "0.5 seconds":"1 second" );
+
+ {
+ int i;
+ for(i=0;i<(500*time);i++)
+ udelay(1000);
+ }
+
+ /* setup ATU registers */
+ immap->im_pci.pci_pocmr0 = cpu_to_le32(POCMR_ENABLE | POCMR_PCI_IO |
+ ((~(M82xx_PCI_IO_SIZE - 1U)) >> POTA_ADDR_SHIFT));
+ immap->im_pci.pci_potar0 = cpu_to_le32(M82xx_PCI_LOWER_IO >> POTA_ADDR_SHIFT);
+ immap->im_pci.pci_pobar0 = cpu_to_le32(M82xx_PCI_IO_BASE >> POTA_ADDR_SHIFT);
+
+ /* Set-up non-prefetchable window */
+ immap->im_pci.pci_pocmr1 = cpu_to_le32(POCMR_ENABLE | ((~(M82xx_PCI_MMIO_SIZE-1U)) >> POTA_ADDR_SHIFT));
+ immap->im_pci.pci_potar1 = cpu_to_le32(M82xx_PCI_LOWER_MMIO >> POTA_ADDR_SHIFT);
+ immap->im_pci.pci_pobar1 = cpu_to_le32((M82xx_PCI_LOWER_MMIO - M82xx_PCI_MMIO_OFFSET) >> POTA_ADDR_SHIFT);
+
+ /* Set-up prefetchable window */
+ immap->im_pci.pci_pocmr2 = cpu_to_le32(POCMR_ENABLE |POCMR_PREFETCH_EN |
+ (~(M82xx_PCI_MEM_SIZE-1U) >> POTA_ADDR_SHIFT));
+ immap->im_pci.pci_potar2 = cpu_to_le32(M82xx_PCI_LOWER_MEM >> POTA_ADDR_SHIFT);
+ immap->im_pci.pci_pobar2 = cpu_to_le32((M82xx_PCI_LOWER_MEM - M82xx_PCI_MEM_OFFSET) >> POTA_ADDR_SHIFT);
+
+ /* Inbound transactions from PCI memory space */
+ immap->im_pci.pci_picmr0 = cpu_to_le32(PICMR_ENABLE | PICMR_PREFETCH_EN |
+ ((~(M82xx_PCI_SLAVE_MEM_SIZE-1U)) >> PITA_ADDR_SHIFT));
+ immap->im_pci.pci_pibar0 = cpu_to_le32(M82xx_PCI_SLAVE_MEM_BUS >> PITA_ADDR_SHIFT);
+ immap->im_pci.pci_pitar0 = cpu_to_le32(M82xx_PCI_SLAVE_MEM_LOCAL>> PITA_ADDR_SHIFT);
+
+#if defined CONFIG_ADS8272
+ /* PCI int highest prio */
+ immap->im_siu_conf.siu_82xx.sc_ppc_alrh = 0x01236745;
+#elif defined CONFIG_PQ2FADS
+ immap->im_siu_conf.siu_82xx.sc_ppc_alrh = 0x03124567;
+#endif
+ /* park bus on PCI */
+ immap->im_siu_conf.siu_82xx.sc_ppc_acr = PPC_ACR_BUS_PARK_PCI;
+
+ /* Enable bus mastering and inbound memory transactions */
+ early_read_config_dword(hose, hose->first_busno, 0, PCI_COMMAND, &val);
+ val &= 0xffff0000;
+ val |= PCI_COMMAND_MEMORY|PCI_COMMAND_MASTER;
+ early_write_config_dword(hose, hose->first_busno, 0, PCI_COMMAND, val);
+
+}
+
+void __init pq2_find_bridges(void)
+{
+ extern int pci_assign_all_busses;
+ struct pci_controller * hose;
+ int host_bridge;
+
+ pci_assign_all_busses = 1;
+
+ hose = pcibios_alloc_controller();
+
+ if (!hose)
+ return;
+
+ ppc_md.pci_swizzle = common_swizzle;
+
+ hose->first_busno = 0;
+ hose->bus_offset = 0;
+ hose->last_busno = 0xff;
+
+#ifdef CONFIG_ADS8272
+ hose->set_cfg_type = 1;
+#endif
+
+ setup_m8260_indirect_pci(hose,
+ (unsigned long)&cpm2_immr->im_pci.pci_cfg_addr,
+ (unsigned long)&cpm2_immr->im_pci.pci_cfg_data);
+
+ /* Make sure it is a supported bridge */
+ early_read_config_dword(hose,
+ 0,
+ PCI_DEVFN(0,0),
+ PCI_VENDOR_ID,
+ &host_bridge);
+ switch (host_bridge) {
+ case PCI_DEVICE_ID_MPC8265:
+ break;
+ case PCI_DEVICE_ID_MPC8272:
+ break;
+ default:
+ printk("Attempting to use unrecognized host bridge ID"
+ " 0x%08x.\n", host_bridge);
+ break;
+ }
+
+ pq2ads_setup_pci(hose);
+
+ hose->io_space.start = M82xx_PCI_LOWER_IO;
+ hose->io_space.end = M82xx_PCI_UPPER_IO;
+ hose->mem_space.start = M82xx_PCI_LOWER_MEM;
+ hose->mem_space.end = M82xx_PCI_UPPER_MMIO;
+ hose->pci_mem_offset = M82xx_PCI_MEM_OFFSET;
+
+ isa_io_base =
+ (unsigned long) ioremap(M82xx_PCI_IO_BASE,
+ M82xx_PCI_IO_SIZE);
+ hose->io_base_virt = (void *) isa_io_base;
+
+ /* setup resources */
+ pci_init_resource(&hose->mem_resources[0],
+ M82xx_PCI_LOWER_MEM,
+ M82xx_PCI_UPPER_MEM,
+ IORESOURCE_MEM|IORESOURCE_PREFETCH, "PCI prefetchable memory");
+
+ pci_init_resource(&hose->mem_resources[1],
+ M82xx_PCI_LOWER_MMIO,
+ M82xx_PCI_UPPER_MMIO,
+ IORESOURCE_MEM, "PCI memory");
+
+ pci_init_resource(&hose->io_resource,
+ M82xx_PCI_LOWER_IO,
+ M82xx_PCI_UPPER_IO,
+ IORESOURCE_IO | 1, "PCI I/O");
+
+ ppc_md.pci_exclude_device = pq2pci_exclude_device;
+ hose->last_busno = pciauto_bus_scan(hose, hose->first_busno);
+
+ ppc_md.pci_map_irq = pq2pci_map_irq;
+ ppc_md.pcibios_fixup = NULL;
+ ppc_md.pcibios_fixup_bus = NULL;
+
+}
diff --git a/arch/ppc/syslib/m82xx_pci.h b/arch/ppc/syslib/m82xx_pci.h
new file mode 100644
index 000000000000..924f73f8e595
--- /dev/null
+++ b/arch/ppc/syslib/m82xx_pci.h
@@ -0,0 +1,92 @@
+
+#ifndef _PPC_KERNEL_M82XX_PCI_H
+#define _PPC_KERNEL_M82XX_PCI_H
+
+#include <asm/m8260_pci.h>
+/*
+ * Local->PCI map (from CPU) controlled by
+ * MPC826x master window
+ *
+ * 0xF6000000 - 0xF7FFFFFF IO space
+ * 0x80000000 - 0xBFFFFFFF CPU2PCI memory space PCIBR0
+ *
+ * 0x80000000 - 0x9FFFFFFF PCI Mem with prefetch (Outbound ATU #1)
+ * 0xA0000000 - 0xBFFFFFFF PCI Mem w/o prefetch (Outbound ATU #2)
+ * 0xF6000000 - 0xF7FFFFFF 32-bit PCI IO (Outbound ATU #3)
+ *
+ * PCI->Local map (from PCI)
+ * MPC826x slave window controlled by
+ *
+ * 0x00000000 - 0x07FFFFFF MPC826x local memory (Inbound ATU #1)
+ */
+
+/*
+ * Slave window that allows PCI masters to access MPC826x local memory.
+ * This window is set up using the first set of Inbound ATU registers
+ */
+
+#ifndef M82xx_PCI_SLAVE_MEM_LOCAL
+#define M82xx_PCI_SLAVE_MEM_LOCAL (((struct bd_info *)__res)->bi_memstart)
+#define M82xx_PCI_SLAVE_MEM_BUS (((struct bd_info *)__res)->bi_memstart)
+#define M82xx_PCI_SLAVE_MEM_SIZE (((struct bd_info *)__res)->bi_memsize)
+#endif
+
+/*
+ * This is the window that allows the CPU to access PCI address space.
+ * It will be setup with the SIU PCIBR0 register. All three PCI master
+ * windows, which allow the CPU to access PCI prefetch, non prefetch,
+ * and IO space (see below), must all fit within this window.
+ */
+
+#ifndef M82xx_PCI_LOWER_MEM
+#define M82xx_PCI_LOWER_MEM 0x80000000
+#define M82xx_PCI_UPPER_MEM 0x9fffffff
+#define M82xx_PCI_MEM_OFFSET 0x00000000
+#define M82xx_PCI_MEM_SIZE 0x20000000
+#endif
+
+#ifndef M82xx_PCI_LOWER_MMIO
+#define M82xx_PCI_LOWER_MMIO 0xa0000000
+#define M82xx_PCI_UPPER_MMIO 0xafffffff
+#define M82xx_PCI_MMIO_OFFSET 0x00000000
+#define M82xx_PCI_MMIO_SIZE 0x20000000
+#endif
+
+#ifndef M82xx_PCI_LOWER_IO
+#define M82xx_PCI_LOWER_IO 0x00000000
+#define M82xx_PCI_UPPER_IO 0x01ffffff
+#define M82xx_PCI_IO_BASE 0xf6000000
+#define M82xx_PCI_IO_SIZE 0x02000000
+#endif
+
+#ifndef M82xx_PCI_PRIM_WND_SIZE
+#define M82xx_PCI_PRIM_WND_SIZE ~(M82xx_PCI_IO_SIZE - 1U)
+#define M82xx_PCI_PRIM_WND_BASE (M82xx_PCI_IO_BASE)
+#endif
+
+#ifndef M82xx_PCI_SEC_WND_SIZE
+#define M82xx_PCI_SEC_WND_SIZE ~(M82xx_PCI_MEM_SIZE + M82xx_PCI_MMIO_SIZE - 1U)
+#define M82xx_PCI_SEC_WND_BASE (M82xx_PCI_LOWER_MEM)
+#endif
+
+#ifndef POTA_ADDR_SHIFT
+#define POTA_ADDR_SHIFT 12
+#endif
+
+#ifndef PITA_ADDR_SHIFT
+#define PITA_ADDR_SHIFT 12
+#endif
+
+#ifndef _IO_BASE
+#define _IO_BASE isa_io_base
+#endif
+
+#ifdef CONFIG_8260_PCI9
+struct pci_controller;
+extern void setup_m8260_indirect_pci(struct pci_controller* hose,
+ u32 cfg_addr, u32 cfg_data);
+#else
+#define setup_m8260_indirect_pci setup_indirect_pci
+#endif
+
+#endif /* _PPC_KERNEL_M8260_PCI_H */
diff --git a/arch/ppc/syslib/mpc10x_common.c b/arch/ppc/syslib/mpc10x_common.c
index fd93adfd464c..8fc5f4154521 100644
--- a/arch/ppc/syslib/mpc10x_common.c
+++ b/arch/ppc/syslib/mpc10x_common.c
@@ -21,6 +21,9 @@
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/slab.h>
+#include <linux/serial_8250.h>
+#include <linux/fsl_devices.h>
+#include <linux/device.h>
#include <asm/byteorder.h>
#include <asm/io.h>
@@ -30,16 +33,7 @@
#include <asm/pci-bridge.h>
#include <asm/open_pic.h>
#include <asm/mpc10x.h>
-#include <asm/ocp.h>
-
-/* The OCP structure is fixed by code below, before OCP initialises.
- paddr depends on where the board places the EUMB.
- - fixed in mpc10x_bridge_init().
- irq depends on two things:
- > does the board use the EPIC at all? (PCORE does not).
- > is the EPIC in serial or parallel mode?
- - fixed in mpc10x_set_openpic().
-*/
+#include <asm/ppc_sys.h>
#ifdef CONFIG_MPC10X_OPENPIC
#ifdef CONFIG_EPIC_SERIAL_MODE
@@ -50,35 +44,140 @@
#define MPC10X_I2C_IRQ (EPIC_IRQ_BASE + NUM_8259_INTERRUPTS)
#define MPC10X_DMA0_IRQ (EPIC_IRQ_BASE + 1 + NUM_8259_INTERRUPTS)
#define MPC10X_DMA1_IRQ (EPIC_IRQ_BASE + 2 + NUM_8259_INTERRUPTS)
+#define MPC10X_UART0_IRQ (EPIC_IRQ_BASE + 4 + NUM_8259_INTERRUPTS)
#else
-#define MPC10X_I2C_IRQ OCP_IRQ_NA
-#define MPC10X_DMA0_IRQ OCP_IRQ_NA
-#define MPC10X_DMA1_IRQ OCP_IRQ_NA
+#define MPC10X_I2C_IRQ -1
+#define MPC10X_DMA0_IRQ -1
+#define MPC10X_DMA1_IRQ -1
+#define MPC10X_UART0_IRQ -1
#endif
-
-struct ocp_def core_ocp[] = {
- { .vendor = OCP_VENDOR_INVALID
- }
+static struct fsl_i2c_platform_data mpc10x_i2c_pdata = {
+ .device_flags = 0,
};
-static struct ocp_fs_i2c_data mpc10x_i2c_data = {
- .flags = 0
+static struct plat_serial8250_port serial_platform_data[] = {
+ [0] = {
+ .mapbase = 0x4500,
+ .iotype = UPIO_MEM,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+ },
+ [1] = {
+ .mapbase = 0x4600,
+ .iotype = UPIO_MEM,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+ },
+ { },
};
-static struct ocp_def mpc10x_i2c_ocp = {
- .vendor = OCP_VENDOR_MOTOROLA,
- .function = OCP_FUNC_IIC,
- .index = 0,
- .additions = &mpc10x_i2c_data
+
+struct platform_device ppc_sys_platform_devices[] = {
+ [MPC10X_IIC1] = {
+ .name = "fsl-i2c",
+ .id = 1,
+ .dev.platform_data = &mpc10x_i2c_pdata,
+ .num_resources = 2,
+ .resource = (struct resource[]) {
+ {
+ .start = MPC10X_EUMB_I2C_OFFSET,
+ .end = MPC10X_EUMB_I2C_OFFSET +
+ MPC10X_EUMB_I2C_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .flags = IORESOURCE_IRQ
+ },
+ },
+ },
+ [MPC10X_DMA0] = {
+ .name = "fsl-dma",
+ .id = 0,
+ .num_resources = 2,
+ .resource = (struct resource[]) {
+ {
+ .start = MPC10X_EUMB_DMA_OFFSET + 0x10,
+ .end = MPC10X_EUMB_DMA_OFFSET + 0x1f,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .flags = IORESOURCE_IRQ,
+ },
+ },
+ },
+ [MPC10X_DMA1] = {
+ .name = "fsl-dma",
+ .id = 1,
+ .num_resources = 2,
+ .resource = (struct resource[]) {
+ {
+ .start = MPC10X_EUMB_DMA_OFFSET + 0x20,
+ .end = MPC10X_EUMB_DMA_OFFSET + 0x2f,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .flags = IORESOURCE_IRQ,
+ },
+ },
+ },
+ [MPC10X_DMA1] = {
+ .name = "fsl-dma",
+ .id = 1,
+ .num_resources = 2,
+ .resource = (struct resource[]) {
+ {
+ .start = MPC10X_EUMB_DMA_OFFSET + 0x20,
+ .end = MPC10X_EUMB_DMA_OFFSET + 0x2f,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .flags = IORESOURCE_IRQ,
+ },
+ },
+ },
+ [MPC10X_DUART] = {
+ .name = "serial8250",
+ .id = 0,
+ .dev.platform_data = serial_platform_data,
+ },
};
-static struct ocp_def mpc10x_dma_ocp[2] = {
-{ .vendor = OCP_VENDOR_MOTOROLA,
- .function = OCP_FUNC_DMA,
- .index = 0 },
-{ .vendor = OCP_VENDOR_MOTOROLA,
- .function = OCP_FUNC_DMA,
- .index = 1 }
+/* We use the PCI ID to match on */
+struct ppc_sys_spec *cur_ppc_sys_spec;
+struct ppc_sys_spec ppc_sys_specs[] = {
+ {
+ .ppc_sys_name = "8245",
+ .mask = 0xFFFFFFFF,
+ .value = MPC10X_BRIDGE_8245,
+ .num_devices = 4,
+ .device_list = (enum ppc_sys_devices[])
+ {
+ MPC10X_IIC1, MPC10X_DMA0, MPC10X_DMA1, MPC10X_DUART,
+ },
+ },
+ {
+ .ppc_sys_name = "8240",
+ .mask = 0xFFFFFFFF,
+ .value = MPC10X_BRIDGE_8240,
+ .num_devices = 3,
+ .device_list = (enum ppc_sys_devices[])
+ {
+ MPC10X_IIC1, MPC10X_DMA0, MPC10X_DMA1,
+ },
+ },
+ {
+ .ppc_sys_name = "107",
+ .mask = 0xFFFFFFFF,
+ .value = MPC10X_BRIDGE_107,
+ .num_devices = 3,
+ .device_list = (enum ppc_sys_devices[])
+ {
+ MPC10X_IIC1, MPC10X_DMA0, MPC10X_DMA1,
+ },
+ },
+ { /* default match */
+ .ppc_sys_name = "",
+ .mask = 0x00000000,
+ .value = 0x00000000,
+ },
};
/* Set resources to match bridge memory map */
@@ -132,7 +231,7 @@ mpc10x_bridge_init(struct pci_controller *hose,
uint new_map,
uint phys_eumb_base)
{
- int host_bridge, picr1, picr1_bit;
+ int host_bridge, picr1, picr1_bit, i;
ulong pci_config_addr, pci_config_data;
u_char pir, byte;
@@ -273,7 +372,7 @@ mpc10x_bridge_init(struct pci_controller *hose,
printk("Host bridge in Agent mode\n");
/* Read or Set LMBAR & PCSRBAR? */
}
-
+
/* Set base addr of the 8240/107 EUMB. */
early_write_config_dword(hose,
0,
@@ -287,17 +386,6 @@ mpc10x_bridge_init(struct pci_controller *hose,
ioremap(phys_eumb_base + MPC10X_EUMB_EPIC_OFFSET,
MPC10X_EUMB_EPIC_SIZE);
#endif
- mpc10x_i2c_ocp.paddr = phys_eumb_base + MPC10X_EUMB_I2C_OFFSET;
- mpc10x_i2c_ocp.irq = MPC10X_I2C_IRQ;
- ocp_add_one_device(&mpc10x_i2c_ocp);
- mpc10x_dma_ocp[0].paddr = phys_eumb_base +
- MPC10X_EUMB_DMA_OFFSET + 0x100;
- mpc10x_dma_ocp[0].irq = MPC10X_DMA0_IRQ;
- ocp_add_one_device(&mpc10x_dma_ocp[0]);
- mpc10x_dma_ocp[1].paddr = phys_eumb_base +
- MPC10X_EUMB_DMA_OFFSET + 0x200;
- mpc10x_dma_ocp[1].irq = MPC10X_DMA1_IRQ;
- ocp_add_one_device(&mpc10x_dma_ocp[1]);
}
#ifdef CONFIG_MPC10X_STORE_GATHERING
@@ -306,6 +394,29 @@ mpc10x_bridge_init(struct pci_controller *hose,
mpc10x_disable_store_gathering(hose);
#endif
+ /* setup platform devices for MPC10x bridges */
+ identify_ppc_sys_by_id (host_bridge);
+
+ for (i = 0; i < cur_ppc_sys_spec->num_devices; i++) {
+ unsigned int dev_id = cur_ppc_sys_spec->device_list[i];
+ ppc_sys_fixup_mem_resource(&ppc_sys_platform_devices[dev_id],
+ phys_eumb_base);
+ }
+
+ /* IRQ's are determined at runtime */
+ ppc_sys_platform_devices[MPC10X_IIC1].resource[1].start = MPC10X_I2C_IRQ;
+ ppc_sys_platform_devices[MPC10X_IIC1].resource[1].end = MPC10X_I2C_IRQ;
+ ppc_sys_platform_devices[MPC10X_DMA0].resource[1].start = MPC10X_DMA0_IRQ;
+ ppc_sys_platform_devices[MPC10X_DMA0].resource[1].end = MPC10X_DMA0_IRQ;
+ ppc_sys_platform_devices[MPC10X_DMA1].resource[1].start = MPC10X_DMA1_IRQ;
+ ppc_sys_platform_devices[MPC10X_DMA1].resource[1].end = MPC10X_DMA1_IRQ;
+
+ serial_platform_data[0].mapbase += phys_eumb_base;
+ serial_platform_data[0].irq = MPC10X_UART0_IRQ;
+
+ serial_platform_data[1].mapbase += phys_eumb_base;
+ serial_platform_data[1].irq = MPC10X_UART0_IRQ + 1;
+
/*
* 8240 erratum 26, 8241/8245 erratum 29, 107 erratum 23: speculative
* PCI reads may return stale data so turn off.
@@ -330,7 +441,7 @@ mpc10x_bridge_init(struct pci_controller *hose,
* 8245 (Rev 2., dated 10/2003) says PICR2[0] is reserverd.
*/
if (host_bridge == MPC10X_BRIDGE_8245) {
- ulong picr2;
+ u32 picr2;
early_read_config_dword(hose, 0, PCI_DEVFN(0,0),
MPC10X_CFG_PICR2_REG, &picr2);
@@ -504,6 +615,8 @@ void __init mpc10x_set_openpic(void)
openpic_set_sources(EPIC_IRQ_BASE, 3, OpenPIC_Addr + 0x11020);
/* Skip reserved space and map Message Unit Interrupt (I2O) */
openpic_set_sources(EPIC_IRQ_BASE + 3, 1, OpenPIC_Addr + 0x110C0);
+ /* Skip reserved space and map Serial Interupts */
+ openpic_set_sources(EPIC_IRQ_BASE + 4, 2, OpenPIC_Addr + 0x11120);
openpic_init(NUM_8259_INTERRUPTS);
}
diff --git a/arch/ppc/syslib/mpc85xx_devices.c b/arch/ppc/syslib/mpc85xx_devices.c
index 1e658ef57e75..8af322dd476a 100644
--- a/arch/ppc/syslib/mpc85xx_devices.c
+++ b/arch/ppc/syslib/mpc85xx_devices.c
@@ -40,6 +40,42 @@ static struct gianfar_platform_data mpc85xx_tsec2_pdata = {
.phy_reg_addr = MPC85xx_ENET1_OFFSET,
};
+static struct gianfar_platform_data mpc85xx_etsec1_pdata = {
+ .device_flags = FSL_GIANFAR_DEV_HAS_GIGABIT |
+ FSL_GIANFAR_DEV_HAS_COALESCE | FSL_GIANFAR_DEV_HAS_RMON |
+ FSL_GIANFAR_DEV_HAS_MULTI_INTR |
+ FSL_GIANFAR_DEV_HAS_CSUM | FSL_GIANFAR_DEV_HAS_VLAN |
+ FSL_GIANFAR_DEV_HAS_EXTENDED_HASH,
+ .phy_reg_addr = MPC85xx_ENET1_OFFSET,
+};
+
+static struct gianfar_platform_data mpc85xx_etsec2_pdata = {
+ .device_flags = FSL_GIANFAR_DEV_HAS_GIGABIT |
+ FSL_GIANFAR_DEV_HAS_COALESCE | FSL_GIANFAR_DEV_HAS_RMON |
+ FSL_GIANFAR_DEV_HAS_MULTI_INTR |
+ FSL_GIANFAR_DEV_HAS_CSUM | FSL_GIANFAR_DEV_HAS_VLAN |
+ FSL_GIANFAR_DEV_HAS_EXTENDED_HASH,
+ .phy_reg_addr = MPC85xx_ENET1_OFFSET,
+};
+
+static struct gianfar_platform_data mpc85xx_etsec3_pdata = {
+ .device_flags = FSL_GIANFAR_DEV_HAS_GIGABIT |
+ FSL_GIANFAR_DEV_HAS_COALESCE | FSL_GIANFAR_DEV_HAS_RMON |
+ FSL_GIANFAR_DEV_HAS_MULTI_INTR |
+ FSL_GIANFAR_DEV_HAS_CSUM | FSL_GIANFAR_DEV_HAS_VLAN |
+ FSL_GIANFAR_DEV_HAS_EXTENDED_HASH,
+ .phy_reg_addr = MPC85xx_ENET1_OFFSET,
+};
+
+static struct gianfar_platform_data mpc85xx_etsec4_pdata = {
+ .device_flags = FSL_GIANFAR_DEV_HAS_GIGABIT |
+ FSL_GIANFAR_DEV_HAS_COALESCE | FSL_GIANFAR_DEV_HAS_RMON |
+ FSL_GIANFAR_DEV_HAS_MULTI_INTR |
+ FSL_GIANFAR_DEV_HAS_CSUM | FSL_GIANFAR_DEV_HAS_VLAN |
+ FSL_GIANFAR_DEV_HAS_EXTENDED_HASH,
+ .phy_reg_addr = MPC85xx_ENET1_OFFSET,
+};
+
static struct gianfar_platform_data mpc85xx_fec_pdata = {
.phy_reg_addr = MPC85xx_ENET1_OFFSET,
};
@@ -48,6 +84,10 @@ static struct fsl_i2c_platform_data mpc85xx_fsl_i2c_pdata = {
.device_flags = FSL_I2C_DEV_SEPARATE_DFSRR,
};
+static struct fsl_i2c_platform_data mpc85xx_fsl_i2c2_pdata = {
+ .device_flags = FSL_I2C_DEV_SEPARATE_DFSRR,
+};
+
static struct plat_serial8250_port serial_platform_data[] = {
[0] = {
.mapbase = 0x4500,
@@ -281,7 +321,6 @@ struct platform_device ppc_sys_platform_devices[] = {
},
},
},
-#ifdef CONFIG_CPM2
[MPC85xx_CPM_FCC1] = {
.name = "fsl-cpm-fcc",
.id = 1,
@@ -535,7 +574,151 @@ struct platform_device ppc_sys_platform_devices[] = {
},
},
},
-#endif /* CONFIG_CPM2 */
+ [MPC85xx_eTSEC1] = {
+ .name = "fsl-gianfar",
+ .id = 1,
+ .dev.platform_data = &mpc85xx_etsec1_pdata,
+ .num_resources = 4,
+ .resource = (struct resource[]) {
+ {
+ .start = MPC85xx_ENET1_OFFSET,
+ .end = MPC85xx_ENET1_OFFSET +
+ MPC85xx_ENET1_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "tx",
+ .start = MPC85xx_IRQ_TSEC1_TX,
+ .end = MPC85xx_IRQ_TSEC1_TX,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .name = "rx",
+ .start = MPC85xx_IRQ_TSEC1_RX,
+ .end = MPC85xx_IRQ_TSEC1_RX,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .name = "error",
+ .start = MPC85xx_IRQ_TSEC1_ERROR,
+ .end = MPC85xx_IRQ_TSEC1_ERROR,
+ .flags = IORESOURCE_IRQ,
+ },
+ },
+ },
+ [MPC85xx_eTSEC2] = {
+ .name = "fsl-gianfar",
+ .id = 2,
+ .dev.platform_data = &mpc85xx_etsec2_pdata,
+ .num_resources = 4,
+ .resource = (struct resource[]) {
+ {
+ .start = MPC85xx_ENET2_OFFSET,
+ .end = MPC85xx_ENET2_OFFSET +
+ MPC85xx_ENET2_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "tx",
+ .start = MPC85xx_IRQ_TSEC2_TX,
+ .end = MPC85xx_IRQ_TSEC2_TX,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .name = "rx",
+ .start = MPC85xx_IRQ_TSEC2_RX,
+ .end = MPC85xx_IRQ_TSEC2_RX,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .name = "error",
+ .start = MPC85xx_IRQ_TSEC2_ERROR,
+ .end = MPC85xx_IRQ_TSEC2_ERROR,
+ .flags = IORESOURCE_IRQ,
+ },
+ },
+ },
+ [MPC85xx_eTSEC3] = {
+ .name = "fsl-gianfar",
+ .id = 3,
+ .dev.platform_data = &mpc85xx_etsec3_pdata,
+ .num_resources = 4,
+ .resource = (struct resource[]) {
+ {
+ .start = MPC85xx_ENET3_OFFSET,
+ .end = MPC85xx_ENET3_OFFSET +
+ MPC85xx_ENET3_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "tx",
+ .start = MPC85xx_IRQ_TSEC3_TX,
+ .end = MPC85xx_IRQ_TSEC3_TX,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .name = "rx",
+ .start = MPC85xx_IRQ_TSEC3_RX,
+ .end = MPC85xx_IRQ_TSEC3_RX,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .name = "error",
+ .start = MPC85xx_IRQ_TSEC3_ERROR,
+ .end = MPC85xx_IRQ_TSEC3_ERROR,
+ .flags = IORESOURCE_IRQ,
+ },
+ },
+ },
+ [MPC85xx_eTSEC4] = {
+ .name = "fsl-gianfar",
+ .id = 4,
+ .dev.platform_data = &mpc85xx_etsec4_pdata,
+ .num_resources = 4,
+ .resource = (struct resource[]) {
+ {
+ .start = 0x27000,
+ .end = 0x27fff,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "tx",
+ .start = MPC85xx_IRQ_TSEC4_TX,
+ .end = MPC85xx_IRQ_TSEC4_TX,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .name = "rx",
+ .start = MPC85xx_IRQ_TSEC4_RX,
+ .end = MPC85xx_IRQ_TSEC4_RX,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .name = "error",
+ .start = MPC85xx_IRQ_TSEC4_ERROR,
+ .end = MPC85xx_IRQ_TSEC4_ERROR,
+ .flags = IORESOURCE_IRQ,
+ },
+ },
+ },
+ [MPC85xx_IIC2] = {
+ .name = "fsl-i2c",
+ .id = 2,
+ .dev.platform_data = &mpc85xx_fsl_i2c2_pdata,
+ .num_resources = 2,
+ .resource = (struct resource[]) {
+ {
+ .start = 0x03100,
+ .end = 0x031ff,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = MPC85xx_IRQ_IIC1,
+ .end = MPC85xx_IRQ_IIC1,
+ .flags = IORESOURCE_IRQ,
+ },
+ },
+ },
};
static int __init mach_mpc85xx_fixup(struct platform_device *pdev)
diff --git a/arch/ppc/syslib/mpc85xx_sys.c b/arch/ppc/syslib/mpc85xx_sys.c
index d806a92a9401..6e3184ab354f 100644
--- a/arch/ppc/syslib/mpc85xx_sys.c
+++ b/arch/ppc/syslib/mpc85xx_sys.c
@@ -110,6 +110,111 @@ struct ppc_sys_spec ppc_sys_specs[] = {
MPC85xx_CPM_USB,
},
},
+ /* SVRs on 8548 rev1.0 matches for 8548/8547/8545 */
+ {
+ .ppc_sys_name = "8548E",
+ .mask = 0xFFFF00F0,
+ .value = 0x80390010,
+ .num_devices = 13,
+ .device_list = (enum ppc_sys_devices[])
+ {
+ MPC85xx_eTSEC1, MPC85xx_eTSEC2, MPC85xx_eTSEC3,
+ MPC85xx_eTSEC4, MPC85xx_IIC1, MPC85xx_IIC2,
+ MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3,
+ MPC85xx_PERFMON, MPC85xx_DUART, MPC85xx_SEC2,
+ },
+ },
+ {
+ .ppc_sys_name = "8548",
+ .mask = 0xFFFF00F0,
+ .value = 0x80310010,
+ .num_devices = 12,
+ .device_list = (enum ppc_sys_devices[])
+ {
+ MPC85xx_eTSEC1, MPC85xx_eTSEC2, MPC85xx_eTSEC3,
+ MPC85xx_eTSEC4, MPC85xx_IIC1, MPC85xx_IIC2,
+ MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3,
+ MPC85xx_PERFMON, MPC85xx_DUART,
+ },
+ },
+ {
+ .ppc_sys_name = "8547E",
+ .mask = 0xFFFF00F0,
+ .value = 0x80390010,
+ .num_devices = 13,
+ .device_list = (enum ppc_sys_devices[])
+ {
+ MPC85xx_eTSEC1, MPC85xx_eTSEC2, MPC85xx_eTSEC3,
+ MPC85xx_eTSEC4, MPC85xx_IIC1, MPC85xx_IIC2,
+ MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3,
+ MPC85xx_PERFMON, MPC85xx_DUART, MPC85xx_SEC2,
+ },
+ },
+ {
+ .ppc_sys_name = "8547",
+ .mask = 0xFFFF00F0,
+ .value = 0x80310010,
+ .num_devices = 12,
+ .device_list = (enum ppc_sys_devices[])
+ {
+ MPC85xx_eTSEC1, MPC85xx_eTSEC2, MPC85xx_eTSEC3,
+ MPC85xx_eTSEC4, MPC85xx_IIC1, MPC85xx_IIC2,
+ MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3,
+ MPC85xx_PERFMON, MPC85xx_DUART,
+ },
+ },
+ {
+ .ppc_sys_name = "8545E",
+ .mask = 0xFFFF00F0,
+ .value = 0x80390010,
+ .num_devices = 11,
+ .device_list = (enum ppc_sys_devices[])
+ {
+ MPC85xx_eTSEC1, MPC85xx_eTSEC2,
+ MPC85xx_IIC1, MPC85xx_IIC2,
+ MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3,
+ MPC85xx_PERFMON, MPC85xx_DUART, MPC85xx_SEC2,
+ },
+ },
+ {
+ .ppc_sys_name = "8545",
+ .mask = 0xFFFF00F0,
+ .value = 0x80310010,
+ .num_devices = 10,
+ .device_list = (enum ppc_sys_devices[])
+ {
+ MPC85xx_eTSEC1, MPC85xx_eTSEC2,
+ MPC85xx_IIC1, MPC85xx_IIC2,
+ MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3,
+ MPC85xx_PERFMON, MPC85xx_DUART,
+ },
+ },
+ {
+ .ppc_sys_name = "8543E",
+ .mask = 0xFFFF00F0,
+ .value = 0x803A0010,
+ .num_devices = 11,
+ .device_list = (enum ppc_sys_devices[])
+ {
+ MPC85xx_eTSEC1, MPC85xx_eTSEC2,
+ MPC85xx_IIC1, MPC85xx_IIC2,
+ MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3,
+ MPC85xx_PERFMON, MPC85xx_DUART, MPC85xx_SEC2,
+ },
+ },
+ {
+ .ppc_sys_name = "8543",
+ .mask = 0xFFFF00F0,
+ .value = 0x80320010,
+ .num_devices = 10,
+ .device_list = (enum ppc_sys_devices[])
+ {
+ MPC85xx_eTSEC1, MPC85xx_eTSEC2,
+ MPC85xx_IIC1, MPC85xx_IIC2,
+ MPC85xx_DMA0, MPC85xx_DMA1, MPC85xx_DMA2, MPC85xx_DMA3,
+ MPC85xx_PERFMON, MPC85xx_DUART,
+ },
+ },
{ /* default match */
.ppc_sys_name = "",
.mask = 0x00000000,
diff --git a/arch/ppc/syslib/mv64x60.c b/arch/ppc/syslib/mv64x60.c
index 7b241e7876bd..cc77177fa1c6 100644
--- a/arch/ppc/syslib/mv64x60.c
+++ b/arch/ppc/syslib/mv64x60.c
@@ -17,7 +17,6 @@
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/string.h>
-#include <linux/bootmem.h>
#include <linux/spinlock.h>
#include <linux/mv643xx.h>
diff --git a/arch/ppc/syslib/mv64x60_win.c b/arch/ppc/syslib/mv64x60_win.c
index b6f0f5dcf6ee..5b827e2bbe22 100644
--- a/arch/ppc/syslib/mv64x60_win.c
+++ b/arch/ppc/syslib/mv64x60_win.c
@@ -17,7 +17,6 @@
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/string.h>
-#include <linux/bootmem.h>
#include <linux/mv643xx.h>
#include <asm/byteorder.h>
diff --git a/arch/ppc/syslib/ocp.c b/arch/ppc/syslib/ocp.c
index a5156c5179a6..e5fd2ae503ea 100644
--- a/arch/ppc/syslib/ocp.c
+++ b/arch/ppc/syslib/ocp.c
@@ -68,7 +68,7 @@ static int ocp_inited;
/* Sysfs support */
#define OCP_DEF_ATTR(field, format_string) \
static ssize_t \
-show_##field(struct device *dev, char *buf) \
+show_##field(struct device *dev, struct device_attribute *attr, char *buf) \
{ \
struct ocp_device *odev = to_ocp_dev(dev); \
\
diff --git a/arch/ppc/syslib/of_device.c b/arch/ppc/syslib/of_device.c
index 46269ed21aee..49c0e34e2d6b 100644
--- a/arch/ppc/syslib/of_device.c
+++ b/arch/ppc/syslib/of_device.c
@@ -161,7 +161,7 @@ void of_unregister_driver(struct of_platform_driver *drv)
}
-static ssize_t dev_show_devspec(struct device *dev, char *buf)
+static ssize_t dev_show_devspec(struct device *dev, struct device_attribute *attr, char *buf)
{
struct of_device *ofdev;
diff --git a/arch/ppc/syslib/open_pic.c b/arch/ppc/syslib/open_pic.c
index 9d4ed68b5804..b45d8268bf93 100644
--- a/arch/ppc/syslib/open_pic.c
+++ b/arch/ppc/syslib/open_pic.c
@@ -21,7 +21,6 @@
#include <asm/signal.h>
#include <asm/io.h>
#include <asm/irq.h>
-#include <asm/prom.h>
#include <asm/sections.h>
#include <asm/open_pic.h>
#include <asm/i8259.h>
@@ -275,7 +274,7 @@ static void __init openpic_enable_sie(void)
}
#endif
-#if defined(CONFIG_EPIC_SERIAL_MODE) || defined(CONFIG_PM)
+#if defined(CONFIG_EPIC_SERIAL_MODE)
static void openpic_reset(void)
{
openpic_setfield(&OpenPIC->Global.Global_Configuration0,
@@ -993,8 +992,6 @@ int openpic_resume(struct sys_device *sysdev)
return 0;
}
- openpic_reset();
-
/* OpenPIC sometimes seem to need some time to be fully back up... */
do {
openpic_set_spurious(OPENPIC_VEC_SPURIOUS);
diff --git a/arch/ppc/syslib/open_pic2.c b/arch/ppc/syslib/open_pic2.c
index ea26da0d8b6b..7e272c51a497 100644
--- a/arch/ppc/syslib/open_pic2.c
+++ b/arch/ppc/syslib/open_pic2.c
@@ -25,7 +25,6 @@
#include <asm/signal.h>
#include <asm/io.h>
#include <asm/irq.h>
-#include <asm/prom.h>
#include <asm/sections.h>
#include <asm/open_pic.h>
#include <asm/i8259.h>
diff --git a/arch/ppc/syslib/ppc4xx_kgdb.c b/arch/ppc/syslib/ppc4xx_kgdb.c
deleted file mode 100644
index fe8668bf8137..000000000000
--- a/arch/ppc/syslib/ppc4xx_kgdb.c
+++ /dev/null
@@ -1,124 +0,0 @@
-#include <linux/config.h>
-#include <linux/types.h>
-#include <asm/ibm4xx.h>
-#include <linux/kernel.h>
-
-
-
-#define LSR_DR 0x01 /* Data ready */
-#define LSR_OE 0x02 /* Overrun */
-#define LSR_PE 0x04 /* Parity error */
-#define LSR_FE 0x08 /* Framing error */
-#define LSR_BI 0x10 /* Break */
-#define LSR_THRE 0x20 /* Xmit holding register empty */
-#define LSR_TEMT 0x40 /* Xmitter empty */
-#define LSR_ERR 0x80 /* Error */
-
-#include <platforms/4xx/ibm_ocp.h>
-
-extern struct NS16550* COM_PORTS[];
-#ifndef NULL
-#define NULL 0x00
-#endif
-
-static volatile struct NS16550 *kgdb_debugport = NULL;
-
-volatile struct NS16550 *
-NS16550_init(int chan)
-{
- volatile struct NS16550 *com_port;
- int quot;
-#ifdef BASE_BAUD
- quot = BASE_BAUD / 9600;
-#else
- quot = 0x000c; /* 0xc = 9600 baud (on a pc) */
-#endif
-
- com_port = (struct NS16550 *) COM_PORTS[chan];
-
- com_port->lcr = 0x00;
- com_port->ier = 0xFF;
- com_port->ier = 0x00;
- com_port->lcr = com_port->lcr | 0x80; /* Access baud rate */
- com_port->dll = ( quot & 0x00ff ); /* 0xc = 9600 baud */
- com_port->dlm = ( quot & 0xff00 ) >> 8;
- com_port->lcr = 0x03; /* 8 data, 1 stop, no parity */
- com_port->mcr = 0x00; /* RTS/DTR */
- com_port->fcr = 0x07; /* Clear & enable FIFOs */
-
- return( com_port );
-}
-
-
-void
-NS16550_putc(volatile struct NS16550 *com_port, unsigned char c)
-{
- while ((com_port->lsr & LSR_THRE) == 0)
- ;
- com_port->thr = c;
- return;
-}
-
-unsigned char
-NS16550_getc(volatile struct NS16550 *com_port)
-{
- while ((com_port->lsr & LSR_DR) == 0)
- ;
- return (com_port->rbr);
-}
-
-unsigned char
-NS16550_tstc(volatile struct NS16550 *com_port)
-{
- return ((com_port->lsr & LSR_DR) != 0);
-}
-
-
-#if defined(CONFIG_KGDB_TTYS0)
-#define KGDB_PORT 0
-#elif defined(CONFIG_KGDB_TTYS1)
-#define KGDB_PORT 1
-#elif defined(CONFIG_KGDB_TTYS2)
-#define KGDB_PORT 2
-#elif defined(CONFIG_KGDB_TTYS3)
-#define KGDB_PORT 3
-#else
-#error "invalid kgdb_tty port"
-#endif
-
-void putDebugChar( unsigned char c )
-{
- if ( kgdb_debugport == NULL )
- kgdb_debugport = NS16550_init(KGDB_PORT);
- NS16550_putc( kgdb_debugport, c );
-}
-
-int getDebugChar( void )
-{
- if (kgdb_debugport == NULL)
- kgdb_debugport = NS16550_init(KGDB_PORT);
-
- return(NS16550_getc(kgdb_debugport));
-}
-
-void kgdb_interruptible(int enable)
-{
- return;
-}
-
-void putDebugString(char* str)
-{
- while (*str != '\0') {
- putDebugChar(*str);
- str++;
- }
- putDebugChar('\r');
- return;
-}
-
-void
-kgdb_map_scc(void)
-{
- printk("kgdb init \n");
- kgdb_debugport = NS16550_init(KGDB_PORT);
-}
diff --git a/arch/ppc/syslib/ppc83xx_setup.c b/arch/ppc/syslib/ppc83xx_setup.c
index c28f9d679484..602a86891f7f 100644
--- a/arch/ppc/syslib/ppc83xx_setup.c
+++ b/arch/ppc/syslib/ppc83xx_setup.c
@@ -23,12 +23,12 @@
#include <linux/serial_core.h>
#include <linux/serial_8250.h>
-#include <asm/prom.h>
#include <asm/time.h>
#include <asm/mpc83xx.h>
#include <asm/mmu.h>
#include <asm/ppc_sys.h>
#include <asm/kgdb.h>
+#include <asm/delay.h>
#include <syslib/ppc83xx_setup.h>
@@ -117,7 +117,34 @@ mpc83xx_early_serial_map(void)
void
mpc83xx_restart(char *cmd)
{
+ volatile unsigned char __iomem *reg;
+ unsigned char tmp;
+
+ reg = ioremap(BCSR_PHYS_ADDR, BCSR_SIZE);
+
local_irq_disable();
+
+ /*
+ * Unlock the BCSR bits so a PRST will update the contents.
+ * Otherwise the reset asserts but doesn't clear.
+ */
+ tmp = in_8(reg + BCSR_MISC_REG3_OFF);
+ tmp |= BCSR_MISC_REG3_CNFLOCK; /* low true, high false */
+ out_8(reg + BCSR_MISC_REG3_OFF, tmp);
+
+ /*
+ * Trigger a reset via a low->high transition of the
+ * PORESET bit.
+ */
+ tmp = in_8(reg + BCSR_MISC_REG2_OFF);
+ tmp &= ~BCSR_MISC_REG2_PORESET;
+ out_8(reg + BCSR_MISC_REG2_OFF, tmp);
+
+ udelay(1);
+
+ tmp |= BCSR_MISC_REG2_PORESET;
+ out_8(reg + BCSR_MISC_REG2_OFF, tmp);
+
for(;;);
}
diff --git a/arch/ppc/syslib/ppc85xx_setup.c b/arch/ppc/syslib/ppc85xx_setup.c
index 152c3ef1312a..ca95d79a704e 100644
--- a/arch/ppc/syslib/ppc85xx_setup.c
+++ b/arch/ppc/syslib/ppc85xx_setup.c
@@ -23,7 +23,6 @@
#include <linux/serial_core.h>
#include <linux/serial_8250.h>
-#include <asm/prom.h>
#include <asm/time.h>
#include <asm/mpc85xx.h>
#include <asm/immap_85xx.h>
@@ -33,6 +32,8 @@
#include <syslib/ppc85xx_setup.h>
+extern void abort(void);
+
/* Return the amount of memory */
unsigned long __init
mpc85xx_find_end_of_memory(void)
@@ -132,6 +133,12 @@ mpc85xx_halt(void)
}
#ifdef CONFIG_PCI
+
+#if defined(CONFIG_MPC8555_CDS) || defined(CONFIG_MPC8548_CDS)
+extern void mpc85xx_cds_enable_via(struct pci_controller *hose);
+extern void mpc85xx_cds_fixup_via(struct pci_controller *hose);
+#endif
+
static void __init
mpc85xx_setup_pci1(struct pci_controller *hose)
{
@@ -302,8 +309,18 @@ mpc85xx_setup_hose(void)
ppc_md.pci_exclude_device = mpc85xx_exclude_device;
+#if defined(CONFIG_MPC8555_CDS) || defined(CONFIG_MPC8548_CDS)
+ /* Pre pciauto_bus_scan VIA init */
+ mpc85xx_cds_enable_via(hose_a);
+#endif
+
hose_a->last_busno = pciauto_bus_scan(hose_a, hose_a->first_busno);
+#if defined(CONFIG_MPC8555_CDS) || defined(CONFIG_MPC8548_CDS)
+ /* Post pciauto_bus_scan VIA fixup */
+ mpc85xx_cds_fixup_via(hose_a);
+#endif
+
#ifdef CONFIG_85xx_PCI2
hose_b = pcibios_alloc_controller();
diff --git a/arch/ppc/syslib/prom_init.c b/arch/ppc/syslib/prom_init.c
index 2cee87137f2e..7f15136830f4 100644
--- a/arch/ppc/syslib/prom_init.c
+++ b/arch/ppc/syslib/prom_init.c
@@ -626,8 +626,18 @@ inspect_node(phandle node, struct device_node *dad,
l = call_prom("package-to-path", 3, 1, node,
mem_start, mem_end - mem_start);
if (l >= 0) {
+ char *p, *ep;
+
np->full_name = PTRUNRELOC((char *) mem_start);
*(char *)(mem_start + l) = 0;
+ /* Fixup an Apple bug where they have bogus \0 chars in the
+ * middle of the path in some properties
+ */
+ for (p = (char *)mem_start, ep = p + l; p < ep; p++)
+ if ((*p) == '\0') {
+ memmove(p, p+1, ep - p);
+ ep--;
+ }
mem_start = ALIGNUL(mem_start + l + 1);
}
OpenPOWER on IntegriCloud