diff options
Diffstat (limited to 'arch/ppc/platforms/prpmc800.h')
| -rw-r--r-- | arch/ppc/platforms/prpmc800.h | 82 |
1 files changed, 0 insertions, 82 deletions
diff --git a/arch/ppc/platforms/prpmc800.h b/arch/ppc/platforms/prpmc800.h deleted file mode 100644 index 26f604e05cfa..000000000000 --- a/arch/ppc/platforms/prpmc800.h +++ /dev/null @@ -1,82 +0,0 @@ -/* - * arch/ppc/platforms/prpmc800.h - * - * Definitions for Motorola PrPMC800 board support - * - * Author: Dale Farnsworth <dale.farnsworth@mvista.com> - * - * 2001-2004 (c) MontaVista, Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - /* - * From Processor to PCI: - * PCI Mem Space: 0x80000000 - 0xa0000000 -> 0x80000000 - 0xa0000000 (512 MB) - * PCI I/O Space: 0xfe400000 - 0xfeef0000 -> 0x00000000 - 0x00b00000 (11 MB) - * Note: Must skip 0xfe000000-0xfe400000 for CONFIG_HIGHMEM/PKMAP area - * - * From PCI to Processor: - * System Memory: 0x00000000 -> 0x00000000 - */ - -#ifndef __ASMPPC_PRPMC800_H -#define __ASMPPC_PRPMC800_H - -#define PRPMC800_PCI_CONFIG_ADDR 0xfe000cf8 -#define PRPMC800_PCI_CONFIG_DATA 0xfe000cfc - -#define PRPMC800_PROC_PCI_IO_START 0xfe400000U -#define PRPMC800_PROC_PCI_IO_END 0xfeefffffU -#define PRPMC800_PCI_IO_START 0x00000000U -#define PRPMC800_PCI_IO_END 0x00afffffU - -#define PRPMC800_PROC_PCI_MEM_START 0x80000000U -#define PRPMC800_PROC_PCI_MEM_END 0x9fffffffU -#define PRPMC800_PCI_MEM_START 0x80000000U -#define PRPMC800_PCI_MEM_END 0x9fffffffU - -#define PRPMC800_NM_PROC_PCI_MEM_START 0x40000000U -#define PRPMC800_NM_PROC_PCI_MEM_END 0xdfffffffU -#define PRPMC800_NM_PCI_MEM_START 0x40000000U -#define PRPMC800_NM_PCI_MEM_END 0xdfffffffU - -#define PRPMC800_PCI_DRAM_OFFSET 0x00000000U -#define PRPMC800_PCI_PHY_MEM_OFFSET 0x00000000U - -#define PRPMC800_ISA_IO_BASE PRPMC800_PROC_PCI_IO_START -#define PRPMC800_ISA_MEM_BASE 0x00000000U - -#define PRPMC800_HARRIER_XCSR_BASE HARRIER_DEFAULT_XCSR_BASE -#define PRPMC800_HARRIER_MPIC_BASE 0xff000000 - -#define PRPMC800_SERIAL_1 0xfeff00c0 - -#define PRPMC800_BASE_BAUD 1843200 - -/* - * interrupt vector number and priority for harrier internal interrupt - * sources - */ -#define PRPMC800_INT_IRQ 16 -#define PRPMC800_INT_PRI 15 - -/* UART Defines. */ -#define RS_TABLE_SIZE 4 - -/* Rate for the 1.8432 Mhz clock for the onboard serial chip */ -#define BASE_BAUD (PRPMC800_BASE_BAUD / 16) - -#define STD_COM_FLAGS ASYNC_BOOT_AUTOCONF - -/* UARTS are at IRQ 16 */ -#define STD_SERIAL_PORT_DFNS \ - { 0, BASE_BAUD, PRPMC800_SERIAL_1, 16, STD_COM_FLAGS, /* ttyS0 */\ - iomem_base: (unsigned char *)PRPMC800_SERIAL_1, \ - iomem_reg_shift: 0, \ - io_type: SERIAL_IO_MEM }, - -#define SERIAL_PORT_DFNS \ - STD_SERIAL_PORT_DFNS - -#endif /* __ASMPPC_PRPMC800_H */ |
