diff options
Diffstat (limited to 'arch/ppc/platforms/pplus.c')
| -rw-r--r-- | arch/ppc/platforms/pplus.c | 844 |
1 files changed, 0 insertions, 844 deletions
diff --git a/arch/ppc/platforms/pplus.c b/arch/ppc/platforms/pplus.c deleted file mode 100644 index cbcac85c7a78..000000000000 --- a/arch/ppc/platforms/pplus.c +++ /dev/null @@ -1,844 +0,0 @@ -/* - * Board and PCI setup routines for MCG PowerPlus - * - * Author: Randy Vinson <rvinson@mvista.com> - * - * Derived from original PowerPlus PReP work by - * Cort Dougan, Johnnie Peters, Matt Porter, and - * Troy Benjegerdes. - * - * 2001-2004 (c) MontaVista, Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -#include <linux/kernel.h> -#include <linux/interrupt.h> -#include <linux/init.h> -#include <linux/ioport.h> -#include <linux/console.h> -#include <linux/pci.h> -#include <linux/seq_file.h> -#include <linux/root_dev.h> - -#include <asm/system.h> -#include <asm/io.h> -#include <asm/pgtable.h> -#include <asm/dma.h> -#include <asm/machdep.h> -#include <asm/prep_nvram.h> -#include <asm/vga.h> -#include <asm/i8259.h> -#include <asm/open_pic.h> -#include <asm/hawk.h> -#include <asm/todc.h> -#include <asm/bootinfo.h> -#include <asm/kgdb.h> -#include <asm/reg.h> - -#include "pplus.h" - -#undef DUMP_DBATS - -TODC_ALLOC(); - -extern void pplus_setup_hose(void); -extern void pplus_set_VIA_IDE_native(void); - -extern unsigned long loops_per_jiffy; -unsigned char *Motherboard_map_name; - -/* Tables for known hardware */ - -/* Motorola Mesquite */ -static inline int -mesquite_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) -{ - static char pci_irq_table[][4] = - /* - * MPIC interrupts for various IDSEL values (MPIC IRQ0 = - * Linux IRQ16 (to leave room for ISA IRQs at 0-15). - * PCI IDSEL/INTPIN->INTLINE - * A B C D - */ - { - {18, 0, 0, 0}, /* IDSEL 14 - Enet 0 */ - { 0, 0, 0, 0}, /* IDSEL 15 - unused */ - {19, 19, 19, 19}, /* IDSEL 16 - PMC Slot 1 */ - { 0, 0, 0, 0}, /* IDSEL 17 - unused */ - { 0, 0, 0, 0}, /* IDSEL 18 - unused */ - { 0, 0, 0, 0}, /* IDSEL 19 - unused */ - {24, 25, 26, 27}, /* IDSEL 20 - P2P bridge (to cPCI 1) */ - { 0, 0, 0, 0}, /* IDSEL 21 - unused */ - {28, 29, 30, 31} /* IDSEL 22 - P2P bridge (to cPCI 2) */ - }; - - const long min_idsel = 14, max_idsel = 22, irqs_per_slot = 4; - return PCI_IRQ_TABLE_LOOKUP; -} - -/* Motorola Sitka */ -static inline int -sitka_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) -{ - static char pci_irq_table[][4] = - /* - * MPIC interrupts for various IDSEL values (MPIC IRQ0 = - * Linux IRQ16 (to leave room for ISA IRQs at 0-15). - * PCI IDSEL/INTPIN->INTLINE - * A B C D - */ - { - {18, 0, 0, 0}, /* IDSEL 14 - Enet 0 */ - { 0, 0, 0, 0}, /* IDSEL 15 - unused */ - {25, 26, 27, 28}, /* IDSEL 16 - PMC Slot 1 */ - {28, 25, 26, 27}, /* IDSEL 17 - PMC Slot 2 */ - { 0, 0, 0, 0}, /* IDSEL 18 - unused */ - { 0, 0, 0, 0}, /* IDSEL 19 - unused */ - {20, 0, 0, 0} /* IDSEL 20 - P2P bridge (to cPCI) */ - }; - - const long min_idsel = 14, max_idsel = 20, irqs_per_slot = 4; - return PCI_IRQ_TABLE_LOOKUP; -} - -/* Motorola MTX */ -static inline int -MTX_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) -{ - static char pci_irq_table[][4] = - /* - * MPIC interrupts for various IDSEL values (MPIC IRQ0 = - * Linux IRQ16 (to leave room for ISA IRQs at 0-15). - * PCI IDSEL/INTPIN->INTLINE - * A B C D - */ - { - {19, 0, 0, 0}, /* IDSEL 12 - SCSI */ - { 0, 0, 0, 0}, /* IDSEL 13 - unused */ - {18, 0, 0, 0}, /* IDSEL 14 - Enet */ - { 0, 0, 0, 0}, /* IDSEL 15 - unused */ - {25, 26, 27, 28}, /* IDSEL 16 - PMC Slot 1 */ - {26, 27, 28, 25}, /* IDSEL 17 - PMC Slot 2 */ - {27, 28, 25, 26} /* IDSEL 18 - PCI Slot 3 */ - }; - - const long min_idsel = 12, max_idsel = 18, irqs_per_slot = 4; - return PCI_IRQ_TABLE_LOOKUP; -} - -/* Motorola MTX Plus */ -/* Secondary bus interrupt routing is not supported yet */ -static inline int -MTXplus_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) -{ - static char pci_irq_table[][4] = - /* - * MPIC interrupts for various IDSEL values (MPIC IRQ0 = - * Linux IRQ16 (to leave room for ISA IRQs at 0-15). - * PCI IDSEL/INTPIN->INTLINE - * A B C D - */ - { - {19, 0, 0, 0}, /* IDSEL 12 - SCSI */ - { 0, 0, 0, 0}, /* IDSEL 13 - unused */ - {18, 0, 0, 0}, /* IDSEL 14 - Enet 1 */ - { 0, 0, 0, 0}, /* IDSEL 15 - unused */ - {25, 26, 27, 28}, /* IDSEL 16 - PCI Slot 1P */ - {26, 27, 28, 25}, /* IDSEL 17 - PCI Slot 2P */ - {27, 28, 25, 26}, /* IDSEL 18 - PCI Slot 3P */ - {26, 0, 0, 0}, /* IDSEL 19 - Enet 2 */ - { 0, 0, 0, 0} /* IDSEL 20 - P2P Bridge */ - }; - - const long min_idsel = 12, max_idsel = 20, irqs_per_slot = 4; - return PCI_IRQ_TABLE_LOOKUP; -} - -static inline int -Genesis2_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) -{ - /* 2600 - * Raven 31 - * ISA 11 - * SCSI 12 - IRQ3 - * Univ 13 - * eth 14 - IRQ2 - * VGA 15 - IRQ4 - * PMC1 16 - IRQ9,10,11,12 = PMC1 A-D - * PMC2 17 - IRQ12,9,10,11 = A-D - * SCSI2 18 - IRQ11 - * eth2 19 - IRQ10 - * PCIX 20 - IRQ9,10,11,12 = PCI A-D - */ - - /* 2400 - * Hawk 31 - * ISA 11 - * Univ 13 - * eth 14 - IRQ2 - * PMC1 16 - IRQ9,10,11,12 = PMC A-D - * PMC2 17 - IRQ12,9,10,11 = PMC A-D - * PCIX 20 - IRQ9,10,11,12 = PMC A-D - */ - - /* 2300 - * Raven 31 - * ISA 11 - * Univ 13 - * eth 14 - IRQ2 - * PMC1 16 - 9,10,11,12 = A-D - * PMC2 17 - 9,10,11,12 = B,C,D,A - */ - - static char pci_irq_table[][4] = - /* - * MPIC interrupts for various IDSEL values (MPIC IRQ0 = - * Linux IRQ16 (to leave room for ISA IRQs at 0-15). - * PCI IDSEL/INTPIN->INTLINE - * A B C D - */ - { - {19, 0, 0, 0}, /* IDSEL 12 - SCSI */ - { 0, 0, 0, 0}, /* IDSEL 13 - Universe PCI - VME */ - {18, 0, 0, 0}, /* IDSEL 14 - Enet 1 */ - { 0, 0, 0, 0}, /* IDSEL 15 - unused */ - {25, 26, 27, 28}, /* IDSEL 16 - PCI/PMC Slot 1P */ - {28, 25, 26, 27}, /* IDSEL 17 - PCI/PMC Slot 2P */ - {27, 28, 25, 26}, /* IDSEL 18 - PCI Slot 3P */ - {26, 0, 0, 0}, /* IDSEL 19 - Enet 2 */ - {25, 26, 27, 28} /* IDSEL 20 - P2P Bridge */ - }; - - const long min_idsel = 12, max_idsel = 20, irqs_per_slot = 4; - return PCI_IRQ_TABLE_LOOKUP; -} - -#define MOTOROLA_CPUTYPE_REG 0x800 -#define MOTOROLA_BASETYPE_REG 0x803 -#define MPIC_RAVEN_ID 0x48010000 -#define MPIC_HAWK_ID 0x48030000 -#define MOT_PROC2_BIT 0x800 - -static u_char pplus_openpic_initsenses[] __initdata = { - (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* MVME2600_INT_SIO */ - (IRQ_SENSE_EDGE | IRQ_POLARITY_NEGATIVE),/*MVME2600_INT_FALCN_ECC_ERR */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),/*MVME2600_INT_PCI_ETHERNET */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_SCSI */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),/*MVME2600_INT_PCI_GRAPHICS */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_VME0 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_VME1 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_VME2 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_VME3 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_INTA */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_INTB */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_INTC */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_INTD */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_LM_SIG0 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_LM_SIG1 */ - (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), -}; - -int mot_entry = -1; -int prep_keybd_present = 1; -int mot_multi = 0; - -struct brd_info { - /* 0x100 mask assumes for Raven and Hawk boards that the level/edge - * are set */ - int cpu_type; - /* 0x200 if this board has a Hawk chip. */ - int base_type; - /* or'ed with 0x80 if this board should be checked for multi CPU */ - int max_cpu; - const char *name; - int (*map_irq) (struct pci_dev *, unsigned char, unsigned char); -}; -struct brd_info mot_info[] = { - {0x300, 0x00, 0x00, "MVME 2400", Genesis2_map_irq}, - {0x1E0, 0xE0, 0x00, "Mesquite cPCI (MCP750)", mesquite_map_irq}, - {0x1E0, 0xE1, 0x00, "Sitka cPCI (MCPN750)", sitka_map_irq}, - {0x1E0, 0xE2, 0x00, "Mesquite cPCI (MCP750) w/ HAC", mesquite_map_irq}, - {0x1E0, 0xF6, 0x80, "MTX Plus", MTXplus_map_irq}, - {0x1E0, 0xF6, 0x81, "Dual MTX Plus", MTXplus_map_irq}, - {0x1E0, 0xF7, 0x80, "MTX wo/ Parallel Port", MTX_map_irq}, - {0x1E0, 0xF7, 0x81, "Dual MTX wo/ Parallel Port", MTX_map_irq}, - {0x1E0, 0xF8, 0x80, "MTX w/ Parallel Port", MTX_map_irq}, - {0x1E0, 0xF8, 0x81, "Dual MTX w/ Parallel Port", MTX_map_irq}, - {0x1E0, 0xF9, 0x00, "MVME 2300", Genesis2_map_irq}, - {0x1E0, 0xFA, 0x00, "MVME 2300SC/2600", Genesis2_map_irq}, - {0x1E0, 0xFB, 0x00, "MVME 2600 with MVME712M", Genesis2_map_irq}, - {0x1E0, 0xFC, 0x00, "MVME 2600/2700 with MVME761", Genesis2_map_irq}, - {0x1E0, 0xFD, 0x80, "MVME 3600 with MVME712M", Genesis2_map_irq}, - {0x1E0, 0xFD, 0x81, "MVME 4600 with MVME712M", Genesis2_map_irq}, - {0x1E0, 0xFE, 0x80, "MVME 3600 with MVME761", Genesis2_map_irq}, - {0x1E0, 0xFE, 0x81, "MVME 4600 with MVME761", Genesis2_map_irq}, - {0x000, 0x00, 0x00, "", NULL} -}; - -void __init pplus_set_board_type(void) -{ - unsigned char cpu_type; - unsigned char base_mod; - int entry; - unsigned short devid; - unsigned long *ProcInfo = NULL; - - cpu_type = inb(MOTOROLA_CPUTYPE_REG) & 0xF0; - base_mod = inb(MOTOROLA_BASETYPE_REG); - early_read_config_word(0, 0, 0, PCI_VENDOR_ID, &devid); - - for (entry = 0; mot_info[entry].cpu_type != 0; entry++) { - /* Check for Hawk chip */ - if (mot_info[entry].cpu_type & 0x200) { - if (devid != PCI_DEVICE_ID_MOTOROLA_HAWK) - continue; - } else { - /* store the system config register for later use. */ - ProcInfo = - (unsigned long *)ioremap(PPLUS_SYS_CONFIG_REG, 4); - - /* Check non hawk boards */ - if ((mot_info[entry].cpu_type & 0xff) != cpu_type) - continue; - - if (mot_info[entry].base_type == 0) { - mot_entry = entry; - break; - } - - if (mot_info[entry].base_type != base_mod) - continue; - } - - if (!(mot_info[entry].max_cpu & 0x80)) { - mot_entry = entry; - break; - } - - /* processor 1 not present and max processor zero indicated */ - if ((*ProcInfo & MOT_PROC2_BIT) - && !(mot_info[entry].max_cpu & 0x7f)) { - mot_entry = entry; - break; - } - - /* processor 1 present and max processor zero indicated */ - if (!(*ProcInfo & MOT_PROC2_BIT) - && (mot_info[entry].max_cpu & 0x7f)) { - mot_entry = entry; - break; - } - - /* Indicate to system if this is a multiprocessor board */ - if (!(*ProcInfo & MOT_PROC2_BIT)) - mot_multi = 1; - } - - if (mot_entry == -1) - /* No particular cpu type found - assume Mesquite (MCP750) */ - mot_entry = 1; - - Motherboard_map_name = (unsigned char *)mot_info[mot_entry].name; - ppc_md.pci_map_irq = mot_info[mot_entry].map_irq; -} -void __init pplus_pib_init(void) -{ - unsigned char reg; - unsigned short short_reg; - - struct pci_dev *dev = NULL; - - /* - * Perform specific configuration for the Via Tech or - * or Winbond PCI-ISA-Bridge part. - */ - if ((dev = pci_get_device(PCI_VENDOR_ID_VIA, - PCI_DEVICE_ID_VIA_82C586_1, dev))) { - /* - * PPCBUG does not set the enable bits - * for the IDE device. Force them on here. - */ - pci_read_config_byte(dev, 0x40, ®); - - reg |= 0x03; /* IDE: Chip Enable Bits */ - pci_write_config_byte(dev, 0x40, reg); - } - - if ((dev = pci_get_device(PCI_VENDOR_ID_VIA, - PCI_DEVICE_ID_VIA_82C586_2, - dev)) && (dev->devfn = 0x5a)) { - /* Force correct USB interrupt */ - dev->irq = 11; - pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); - } - - if ((dev = pci_get_device(PCI_VENDOR_ID_WINBOND, - PCI_DEVICE_ID_WINBOND_83C553, dev))) { - /* Clear PCI Interrupt Routing Control Register. */ - short_reg = 0x0000; - pci_write_config_word(dev, 0x44, short_reg); - /* Route IDE interrupts to IRQ 14 */ - reg = 0xEE; - pci_write_config_byte(dev, 0x43, reg); - } - - if ((dev = pci_get_device(PCI_VENDOR_ID_WINBOND, - PCI_DEVICE_ID_WINBOND_82C105, dev))) { - /* - * Disable LEGIRQ mode so PCI INTS are routed - * directly to the 8259 and enable both channels - */ - pci_write_config_dword(dev, 0x40, 0x10ff0033); - - /* Force correct IDE interrupt */ - dev->irq = 14; - pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); - } - pci_dev_put(dev); -} - -void __init pplus_set_VIA_IDE_legacy(void) -{ - unsigned short vend, dev; - - early_read_config_word(0, 0, PCI_DEVFN(0xb, 1), PCI_VENDOR_ID, &vend); - early_read_config_word(0, 0, PCI_DEVFN(0xb, 1), PCI_DEVICE_ID, &dev); - - if ((vend == PCI_VENDOR_ID_VIA) && - (dev == PCI_DEVICE_ID_VIA_82C586_1)) { - unsigned char temp; - - /* put back original "standard" port base addresses */ - early_write_config_dword(0, 0, PCI_DEVFN(0xb, 1), - PCI_BASE_ADDRESS_0, 0x1f1); - early_write_config_dword(0, 0, PCI_DEVFN(0xb, 1), - PCI_BASE_ADDRESS_1, 0x3f5); - early_write_config_dword(0, 0, PCI_DEVFN(0xb, 1), - PCI_BASE_ADDRESS_2, 0x171); - early_write_config_dword(0, 0, PCI_DEVFN(0xb, 1), - PCI_BASE_ADDRESS_3, 0x375); - early_write_config_dword(0, 0, PCI_DEVFN(0xb, 1), - PCI_BASE_ADDRESS_4, 0xcc01); - - /* put into legacy mode */ - early_read_config_byte(0, 0, PCI_DEVFN(0xb, 1), PCI_CLASS_PROG, - &temp); - temp &= ~0x05; - early_write_config_byte(0, 0, PCI_DEVFN(0xb, 1), PCI_CLASS_PROG, - temp); - } -} - -void pplus_set_VIA_IDE_native(void) -{ - unsigned short vend, dev; - - early_read_config_word(0, 0, PCI_DEVFN(0xb, 1), PCI_VENDOR_ID, &vend); - early_read_config_word(0, 0, PCI_DEVFN(0xb, 1), PCI_DEVICE_ID, &dev); - - if ((vend == PCI_VENDOR_ID_VIA) && - (dev == PCI_DEVICE_ID_VIA_82C586_1)) { - unsigned char temp; - - /* put into native mode */ - early_read_config_byte(0, 0, PCI_DEVFN(0xb, 1), PCI_CLASS_PROG, - &temp); - temp |= 0x05; - early_write_config_byte(0, 0, PCI_DEVFN(0xb, 1), PCI_CLASS_PROG, - temp); - } -} - -void __init pplus_pcibios_fixup(void) -{ - - unsigned char reg; - unsigned short devid; - unsigned char base_mod; - - printk(KERN_INFO "Setting PCI interrupts for a \"%s\"\n", - Motherboard_map_name); - - /* Setup the Winbond or Via PIB */ - pplus_pib_init(); - - /* Set up floppy in PS/2 mode */ - outb(0x09, SIO_CONFIG_RA); - reg = inb(SIO_CONFIG_RD); - reg = (reg & 0x3F) | 0x40; - outb(reg, SIO_CONFIG_RD); - outb(reg, SIO_CONFIG_RD); /* Have to write twice to change! */ - - /* This is a hack. If this is a 2300 or 2400 mot board then there is - * no keyboard controller and we have to indicate that. - */ - - early_read_config_word(0, 0, 0, PCI_VENDOR_ID, &devid); - base_mod = inb(MOTOROLA_BASETYPE_REG); - if ((devid == PCI_DEVICE_ID_MOTOROLA_HAWK) || - (base_mod == 0xF9) || (base_mod == 0xFA) || (base_mod == 0xE1)) - prep_keybd_present = 0; -} - -void __init pplus_find_bridges(void) -{ - struct pci_controller *hose; - - hose = pcibios_alloc_controller(); - if (!hose) - return; - - hose->first_busno = 0; - hose->last_busno = 0xff; - - hose->pci_mem_offset = PREP_ISA_MEM_BASE; - hose->io_base_virt = (void *)PREP_ISA_IO_BASE; - - pci_init_resource(&hose->io_resource, PPLUS_PCI_IO_START, - PPLUS_PCI_IO_END, IORESOURCE_IO, "PCI host bridge"); - pci_init_resource(&hose->mem_resources[0], PPLUS_PROC_PCI_MEM_START, - PPLUS_PROC_PCI_MEM_END, IORESOURCE_MEM, - "PCI host bridge"); - - hose->io_space.start = PPLUS_PCI_IO_START; - hose->io_space.end = PPLUS_PCI_IO_END; - hose->mem_space.start = PPLUS_PCI_MEM_START; - hose->mem_space.end = PPLUS_PCI_MEM_END - HAWK_MPIC_SIZE; - - if (hawk_init(hose, PPLUS_HAWK_PPC_REG_BASE, PPLUS_PROC_PCI_MEM_START, - PPLUS_PROC_PCI_MEM_END - HAWK_MPIC_SIZE, - PPLUS_PROC_PCI_IO_START, PPLUS_PROC_PCI_IO_END, - PPLUS_PROC_PCI_MEM_END - HAWK_MPIC_SIZE + 1) - != 0) { - printk(KERN_CRIT "Could not initialize host bridge\n"); - - } - - pplus_set_VIA_IDE_legacy(); - - hose->last_busno = pciauto_bus_scan(hose, hose->first_busno); - - ppc_md.pcibios_fixup = pplus_pcibios_fixup; - ppc_md.pci_swizzle = common_swizzle; -} - -static int pplus_show_cpuinfo(struct seq_file *m) -{ - seq_printf(m, "vendor\t\t: Motorola MCG\n"); - seq_printf(m, "machine\t\t: %s\n", Motherboard_map_name); - - return 0; -} - -static void __init pplus_setup_arch(void) -{ - struct pci_controller *hose; - - if (ppc_md.progress) - ppc_md.progress("pplus_setup_arch: enter", 0); - - /* init to some ~sane value until calibrate_delay() runs */ - loops_per_jiffy = 50000000; - - if (ppc_md.progress) - ppc_md.progress("pplus_setup_arch: find_bridges", 0); - - /* Setup PCI host bridge */ - pplus_find_bridges(); - - hose = pci_bus_to_hose(0); - isa_io_base = (ulong) hose->io_base_virt; - - if (ppc_md.progress) - ppc_md.progress("pplus_setup_arch: set_board_type", 0); - - pplus_set_board_type(); - - /* Enable L2. Assume we don't need to flush -- Cort */ - *(unsigned char *)(PPLUS_L2_CONTROL_REG) |= 3; - -#ifdef CONFIG_BLK_DEV_INITRD - if (initrd_start) - ROOT_DEV = Root_RAM0; - else -#endif -#ifdef CONFIG_ROOT_NFS - ROOT_DEV = Root_NFS; -#else - ROOT_DEV = Root_SDA2; -#endif - - printk(KERN_INFO "Motorola PowerPlus Platform\n"); - printk(KERN_INFO - "Port by MontaVista Software, Inc. (source@mvista.com)\n"); - -#ifdef CONFIG_VGA_CONSOLE - /* remap the VGA memory */ - vgacon_remap_base = (unsigned long)ioremap(PPLUS_ISA_MEM_BASE, - 0x08000000); - conswitchp = &vga_con; -#endif -#ifdef CONFIG_PPCBUG_NVRAM - /* Read in NVRAM data */ - init_prep_nvram(); - - /* if no bootargs, look in NVRAM */ - if (cmd_line[0] == '\0') { - char *bootargs; - bootargs = prep_nvram_get_var("bootargs"); - if (bootargs != NULL) { - strcpy(cmd_line, bootargs); - /* again.. */ - strcpy(boot_command_line, cmd_line); - } - } -#endif - if (ppc_md.progress) - ppc_md.progress("pplus_setup_arch: exit", 0); -} - -static void pplus_restart(char *cmd) -{ - unsigned long i = 10000; - - local_irq_disable(); - - /* set VIA IDE controller into native mode */ - pplus_set_VIA_IDE_native(); - - /* set exception prefix high - to the prom */ - _nmask_and_or_msr(0, MSR_IP); - - /* make sure bit 0 (reset) is a 0 */ - outb(inb(0x92) & ~1L, 0x92); - /* signal a reset to system control port A - soft reset */ - outb(inb(0x92) | 1, 0x92); - - while (i != 0) - i++; - panic("restart failed\n"); -} - -static void pplus_halt(void) -{ - /* set exception prefix high - to the prom */ - _nmask_and_or_msr(MSR_EE, MSR_IP); - - /* make sure bit 0 (reset) is a 0 */ - outb(inb(0x92) & ~1L, 0x92); - /* signal a reset to system control port A - soft reset */ - outb(inb(0x92) | 1, 0x92); - - while (1) ; - /* - * Not reached - */ -} - -static void pplus_power_off(void) -{ - pplus_halt(); -} - -static void __init pplus_init_IRQ(void) -{ - int i; - - if (ppc_md.progress) - ppc_md.progress("init_irq: enter", 0); - - OpenPIC_InitSenses = pplus_openpic_initsenses; - OpenPIC_NumInitSenses = sizeof(pplus_openpic_initsenses); - - if (OpenPIC_Addr != NULL) { - - openpic_set_sources(0, 16, OpenPIC_Addr + 0x10000); - openpic_init(NUM_8259_INTERRUPTS); - openpic_hookup_cascade(NUM_8259_INTERRUPTS, "82c59 cascade", - i8259_irq); - ppc_md.get_irq = openpic_get_irq; - } - - i8259_init(0, 0); - - if (ppc_md.progress) - ppc_md.progress("init_irq: exit", 0); -} - -#ifdef CONFIG_SMP -/* PowerPlus (MTX) support */ -static int __init smp_pplus_probe(void) -{ - extern int mot_multi; - - if (mot_multi) { - openpic_request_IPIs(); - smp_hw_index[1] = 1; - return 2; - } - - return 1; -} - -static void __init smp_pplus_kick_cpu(int nr) -{ - *(unsigned long *)KERNELBASE = nr; - asm volatile ("dcbf 0,%0"::"r" (KERNELBASE):"memory"); - printk(KERN_INFO "CPU1 reset, waiting\n"); -} - -static void __init smp_pplus_setup_cpu(int cpu_nr) -{ - if (OpenPIC_Addr) - do_openpic_setup_cpu(); -} - -static struct smp_ops_t pplus_smp_ops = { - smp_openpic_message_pass, - smp_pplus_probe, - smp_pplus_kick_cpu, - smp_pplus_setup_cpu, - .give_timebase = smp_generic_give_timebase, - .take_timebase = smp_generic_take_timebase, -}; -#endif /* CONFIG_SMP */ - -#ifdef DUMP_DBATS -static void print_dbat(int idx, u32 bat) -{ - - char str[64]; - - sprintf(str, "DBAT%c%c = 0x%08x\n", - (char)((idx - DBAT0U) / 2) + '0', (idx & 1) ? 'L' : 'U', bat); - ppc_md.progress(str, 0); -} - -#define DUMP_DBAT(x) \ - do { \ - u32 __temp = mfspr(x);\ - print_dbat(x, __temp); \ - } while (0) - -static void dump_dbats(void) -{ - if (ppc_md.progress) { - DUMP_DBAT(DBAT0U); - DUMP_DBAT(DBAT0L); - DUMP_DBAT(DBAT1U); - DUMP_DBAT(DBAT1L); - DUMP_DBAT(DBAT2U); - DUMP_DBAT(DBAT2L); - DUMP_DBAT(DBAT3U); - DUMP_DBAT(DBAT3L); - } -} -#endif - -static unsigned long __init pplus_find_end_of_memory(void) -{ - unsigned long total; - - if (ppc_md.progress) - ppc_md.progress("pplus_find_end_of_memory", 0); - -#ifdef DUMP_DBATS - dump_dbats(); -#endif - - total = hawk_get_mem_size(PPLUS_HAWK_SMC_BASE); - return (total); -} - -static void __init pplus_map_io(void) -{ - io_block_mapping(PPLUS_ISA_IO_BASE, PPLUS_ISA_IO_BASE, 0x10000000, - _PAGE_IO); - io_block_mapping(0xfef80000, 0xfef80000, 0x00080000, _PAGE_IO); -} - -static void __init pplus_init2(void) -{ -#ifdef CONFIG_NVRAM - request_region(PREP_NVRAM_AS0, 0x8, "nvram"); -#endif - request_region(0x20, 0x20, "pic1"); - request_region(0xa0, 0x20, "pic2"); - request_region(0x00, 0x20, "dma1"); - request_region(0x40, 0x20, "timer"); - request_region(0x80, 0x10, "dma page reg"); - request_region(0xc0, 0x20, "dma2"); -} - -/* - * Set BAT 2 to access 0x8000000 so progress messages will work and set BAT 3 - * to 0xf0000000 to access Falcon/Raven or Hawk registers - */ -static __inline__ void pplus_set_bat(void) -{ - /* wait for all outstanding memory accesses to complete */ - mb(); - - /* setup DBATs */ - mtspr(SPRN_DBAT2U, 0x80001ffe); - mtspr(SPRN_DBAT2L, 0x8000002a); - mtspr(SPRN_DBAT3U, 0xf0001ffe); - mtspr(SPRN_DBAT3L, 0xf000002a); - - /* wait for updates */ - mb(); -} - -void __init -platform_init(unsigned long r3, unsigned long r4, unsigned long r5, - unsigned long r6, unsigned long r7) -{ - parse_bootinfo(find_bootinfo()); - - /* Map in board regs, etc. */ - pplus_set_bat(); - - isa_io_base = PREP_ISA_IO_BASE; - isa_mem_base = PREP_ISA_MEM_BASE; - pci_dram_offset = PREP_PCI_DRAM_OFFSET; - ISA_DMA_THRESHOLD = 0x00ffffff; - DMA_MODE_READ = 0x44; - DMA_MODE_WRITE = 0x48; - ppc_do_canonicalize_irqs = 1; - - ppc_md.setup_arch = pplus_setup_arch; - ppc_md.show_cpuinfo = pplus_show_cpuinfo; - ppc_md.init_IRQ = pplus_init_IRQ; - /* this gets changed later on if we have an OpenPIC -- Cort */ - ppc_md.get_irq = i8259_irq; - ppc_md.init = pplus_init2; - - ppc_md.restart = pplus_restart; - ppc_md.power_off = pplus_power_off; - ppc_md.halt = pplus_halt; - - TODC_INIT(TODC_TYPE_MK48T59, PREP_NVRAM_AS0, PREP_NVRAM_AS1, - PREP_NVRAM_DATA, 8); - - ppc_md.time_init = todc_time_init; - ppc_md.set_rtc_time = todc_set_rtc_time; - ppc_md.get_rtc_time = todc_get_rtc_time; - ppc_md.calibrate_decr = todc_calibrate_decr; - ppc_md.nvram_read_val = todc_m48txx_read_val; - ppc_md.nvram_write_val = todc_m48txx_write_val; - - ppc_md.find_end_of_memory = pplus_find_end_of_memory; - ppc_md.setup_io_mappings = pplus_map_io; - -#ifdef CONFIG_SERIAL_TEXT_DEBUG - ppc_md.progress = gen550_progress; -#endif /* CONFIG_SERIAL_TEXT_DEBUG */ -#ifdef CONFIG_KGDB - ppc_md.kgdb_map_scc = gen550_kgdb_map_scc; -#endif -#ifdef CONFIG_SMP - smp_ops = &pplus_smp_ops; -#endif /* CONFIG_SMP */ -} |
