summaryrefslogtreecommitdiffstats
path: root/arch/ppc/platforms/pmac_pci.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/ppc/platforms/pmac_pci.c')
-rw-r--r--arch/ppc/platforms/pmac_pci.c1125
1 files changed, 1125 insertions, 0 deletions
diff --git a/arch/ppc/platforms/pmac_pci.c b/arch/ppc/platforms/pmac_pci.c
new file mode 100644
index 000000000000..f6ff51924061
--- /dev/null
+++ b/arch/ppc/platforms/pmac_pci.c
@@ -0,0 +1,1125 @@
+/*
+ * Support for PCI bridges found on Power Macintoshes.
+ * At present the "bandit" and "chaos" bridges are supported.
+ * Fortunately you access configuration space in the same
+ * way with either bridge.
+ *
+ * Copyright (C) 1997 Paul Mackerras (paulus@cs.anu.edu.au)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/string.h>
+#include <linux/init.h>
+#include <linux/bootmem.h>
+
+#include <asm/sections.h>
+#include <asm/io.h>
+#include <asm/prom.h>
+#include <asm/pci-bridge.h>
+#include <asm/machdep.h>
+#include <asm/pmac_feature.h>
+
+#undef DEBUG
+
+#ifdef DEBUG
+#ifdef CONFIG_XMON
+extern void xmon_printf(const char *fmt, ...);
+#define DBG(x...) xmon_printf(x)
+#else
+#define DBG(x...) printk(x)
+#endif
+#else
+#define DBG(x...)
+#endif
+
+static int add_bridge(struct device_node *dev);
+extern void pmac_check_ht_link(void);
+
+/* XXX Could be per-controller, but I don't think we risk anything by
+ * assuming we won't have both UniNorth and Bandit */
+static int has_uninorth;
+#ifdef CONFIG_POWER4
+static struct pci_controller *u3_agp;
+#endif /* CONFIG_POWER4 */
+
+extern u8 pci_cache_line_size;
+extern int pcibios_assign_bus_offset;
+
+struct device_node *k2_skiplist[2];
+
+/*
+ * Magic constants for enabling cache coherency in the bandit/PSX bridge.
+ */
+#define BANDIT_DEVID_2 8
+#define BANDIT_REVID 3
+
+#define BANDIT_DEVNUM 11
+#define BANDIT_MAGIC 0x50
+#define BANDIT_COHERENT 0x40
+
+static int __init
+fixup_one_level_bus_range(struct device_node *node, int higher)
+{
+ for (; node != 0;node = node->sibling) {
+ int * bus_range;
+ unsigned int *class_code;
+ int len;
+
+ /* For PCI<->PCI bridges or CardBus bridges, we go down */
+ class_code = (unsigned int *) get_property(node, "class-code", NULL);
+ if (!class_code || ((*class_code >> 8) != PCI_CLASS_BRIDGE_PCI &&
+ (*class_code >> 8) != PCI_CLASS_BRIDGE_CARDBUS))
+ continue;
+ bus_range = (int *) get_property(node, "bus-range", &len);
+ if (bus_range != NULL && len > 2 * sizeof(int)) {
+ if (bus_range[1] > higher)
+ higher = bus_range[1];
+ }
+ higher = fixup_one_level_bus_range(node->child, higher);
+ }
+ return higher;
+}
+
+/* This routine fixes the "bus-range" property of all bridges in the
+ * system since they tend to have their "last" member wrong on macs
+ *
+ * Note that the bus numbers manipulated here are OF bus numbers, they
+ * are not Linux bus numbers.
+ */
+static void __init
+fixup_bus_range(struct device_node *bridge)
+{
+ int * bus_range;
+ int len;
+
+ /* Lookup the "bus-range" property for the hose */
+ bus_range = (int *) get_property(bridge, "bus-range", &len);
+ if (bus_range == NULL || len < 2 * sizeof(int)) {
+ printk(KERN_WARNING "Can't get bus-range for %s\n",
+ bridge->full_name);
+ return;
+ }
+ bus_range[1] = fixup_one_level_bus_range(bridge->child, bus_range[1]);
+}
+
+/*
+ * Apple MacRISC (U3, UniNorth, Bandit, Chaos) PCI controllers.
+ *
+ * The "Bandit" version is present in all early PCI PowerMacs,
+ * and up to the first ones using Grackle. Some machines may
+ * have 2 bandit controllers (2 PCI busses).
+ *
+ * "Chaos" is used in some "Bandit"-type machines as a bridge
+ * for the separate display bus. It is accessed the same
+ * way as bandit, but cannot be probed for devices. It therefore
+ * has its own config access functions.
+ *
+ * The "UniNorth" version is present in all Core99 machines
+ * (iBook, G4, new IMacs, and all the recent Apple machines).
+ * It contains 3 controllers in one ASIC.
+ *
+ * The U3 is the bridge used on G5 machines. It contains an
+ * AGP bus which is dealt with the old UniNorth access routines
+ * and a HyperTransport bus which uses its own set of access
+ * functions.
+ */
+
+#define MACRISC_CFA0(devfn, off) \
+ ((1 << (unsigned long)PCI_SLOT(dev_fn)) \
+ | (((unsigned long)PCI_FUNC(dev_fn)) << 8) \
+ | (((unsigned long)(off)) & 0xFCUL))
+
+#define MACRISC_CFA1(bus, devfn, off) \
+ ((((unsigned long)(bus)) << 16) \
+ |(((unsigned long)(devfn)) << 8) \
+ |(((unsigned long)(off)) & 0xFCUL) \
+ |1UL)
+
+static void volatile __iomem * __pmac
+macrisc_cfg_access(struct pci_controller* hose, u8 bus, u8 dev_fn, u8 offset)
+{
+ unsigned int caddr;
+
+ if (bus == hose->first_busno) {
+ if (dev_fn < (11 << 3))
+ return NULL;
+ caddr = MACRISC_CFA0(dev_fn, offset);
+ } else
+ caddr = MACRISC_CFA1(bus, dev_fn, offset);
+
+ /* Uninorth will return garbage if we don't read back the value ! */
+ do {
+ out_le32(hose->cfg_addr, caddr);
+ } while (in_le32(hose->cfg_addr) != caddr);
+
+ offset &= has_uninorth ? 0x07 : 0x03;
+ return hose->cfg_data + offset;
+}
+
+static int __pmac
+macrisc_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
+ int len, u32 *val)
+{
+ struct pci_controller *hose = bus->sysdata;
+ void volatile __iomem *addr;
+
+ addr = macrisc_cfg_access(hose, bus->number, devfn, offset);
+ if (!addr)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ /*
+ * Note: the caller has already checked that offset is
+ * suitably aligned and that len is 1, 2 or 4.
+ */
+ switch (len) {
+ case 1:
+ *val = in_8(addr);
+ break;
+ case 2:
+ *val = in_le16(addr);
+ break;
+ default:
+ *val = in_le32(addr);
+ break;
+ }
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int __pmac
+macrisc_write_config(struct pci_bus *bus, unsigned int devfn, int offset,
+ int len, u32 val)
+{
+ struct pci_controller *hose = bus->sysdata;
+ void volatile __iomem *addr;
+
+ addr = macrisc_cfg_access(hose, bus->number, devfn, offset);
+ if (!addr)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ /*
+ * Note: the caller has already checked that offset is
+ * suitably aligned and that len is 1, 2 or 4.
+ */
+ switch (len) {
+ case 1:
+ out_8(addr, val);
+ (void) in_8(addr);
+ break;
+ case 2:
+ out_le16(addr, val);
+ (void) in_le16(addr);
+ break;
+ default:
+ out_le32(addr, val);
+ (void) in_le32(addr);
+ break;
+ }
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static struct pci_ops macrisc_pci_ops =
+{
+ macrisc_read_config,
+ macrisc_write_config
+};
+
+/*
+ * Verifiy that a specific (bus, dev_fn) exists on chaos
+ */
+static int __pmac
+chaos_validate_dev(struct pci_bus *bus, int devfn, int offset)
+{
+ struct device_node *np;
+ u32 *vendor, *device;
+
+ np = pci_busdev_to_OF_node(bus, devfn);
+ if (np == NULL)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ vendor = (u32 *)get_property(np, "vendor-id", NULL);
+ device = (u32 *)get_property(np, "device-id", NULL);
+ if (vendor == NULL || device == NULL)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ if ((*vendor == 0x106b) && (*device == 3) && (offset >= 0x10)
+ && (offset != 0x14) && (offset != 0x18) && (offset <= 0x24))
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int __pmac
+chaos_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
+ int len, u32 *val)
+{
+ int result = chaos_validate_dev(bus, devfn, offset);
+ if (result == PCIBIOS_BAD_REGISTER_NUMBER)
+ *val = ~0U;
+ if (result != PCIBIOS_SUCCESSFUL)
+ return result;
+ return macrisc_read_config(bus, devfn, offset, len, val);
+}
+
+static int __pmac
+chaos_write_config(struct pci_bus *bus, unsigned int devfn, int offset,
+ int len, u32 val)
+{
+ int result = chaos_validate_dev(bus, devfn, offset);
+ if (result != PCIBIOS_SUCCESSFUL)
+ return result;
+ return macrisc_write_config(bus, devfn, offset, len, val);
+}
+
+static struct pci_ops chaos_pci_ops =
+{
+ chaos_read_config,
+ chaos_write_config
+};
+
+#ifdef CONFIG_POWER4
+
+/*
+ * These versions of U3 HyperTransport config space access ops do not
+ * implement self-view of the HT host yet
+ */
+
+#define U3_HT_CFA0(devfn, off) \
+ ((((unsigned long)devfn) << 8) | offset)
+#define U3_HT_CFA1(bus, devfn, off) \
+ (U3_HT_CFA0(devfn, off) \
+ + (((unsigned long)bus) << 16) \
+ + 0x01000000UL)
+
+static void volatile __iomem * __pmac
+u3_ht_cfg_access(struct pci_controller* hose, u8 bus, u8 devfn, u8 offset)
+{
+ if (bus == hose->first_busno) {
+ /* For now, we don't self probe U3 HT bridge */
+ if (PCI_FUNC(devfn) != 0 || PCI_SLOT(devfn) > 7 ||
+ PCI_SLOT(devfn) < 1)
+ return 0;
+ return hose->cfg_data + U3_HT_CFA0(devfn, offset);
+ } else
+ return hose->cfg_data + U3_HT_CFA1(bus, devfn, offset);
+}
+
+static int __pmac
+u3_ht_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
+ int len, u32 *val)
+{
+ struct pci_controller *hose = bus->sysdata;
+ void volatile __iomem *addr;
+ int i;
+
+ struct device_node *np = pci_busdev_to_OF_node(bus, devfn);
+ if (np == NULL)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ /*
+ * When a device in K2 is powered down, we die on config
+ * cycle accesses. Fix that here.
+ */
+ for (i=0; i<2; i++)
+ if (k2_skiplist[i] == np) {
+ switch (len) {
+ case 1:
+ *val = 0xff; break;
+ case 2:
+ *val = 0xffff; break;
+ default:
+ *val = 0xfffffffful; break;
+ }
+ return PCIBIOS_SUCCESSFUL;
+ }
+
+ addr = u3_ht_cfg_access(hose, bus->number, devfn, offset);
+ if (!addr)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ /*
+ * Note: the caller has already checked that offset is
+ * suitably aligned and that len is 1, 2 or 4.
+ */
+ switch (len) {
+ case 1:
+ *val = in_8(addr);
+ break;
+ case 2:
+ *val = in_le16(addr);
+ break;
+ default:
+ *val = in_le32(addr);
+ break;
+ }
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int __pmac
+u3_ht_write_config(struct pci_bus *bus, unsigned int devfn, int offset,
+ int len, u32 val)
+{
+ struct pci_controller *hose = bus->sysdata;
+ void volatile __iomem *addr;
+ int i;
+
+ struct device_node *np = pci_busdev_to_OF_node(bus, devfn);
+ if (np == NULL)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ /*
+ * When a device in K2 is powered down, we die on config
+ * cycle accesses. Fix that here.
+ */
+ for (i=0; i<2; i++)
+ if (k2_skiplist[i] == np)
+ return PCIBIOS_SUCCESSFUL;
+
+ addr = u3_ht_cfg_access(hose, bus->number, devfn, offset);
+ if (!addr)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ /*
+ * Note: the caller has already checked that offset is
+ * suitably aligned and that len is 1, 2 or 4.
+ */
+ switch (len) {
+ case 1:
+ out_8(addr, val);
+ (void) in_8(addr);
+ break;
+ case 2:
+ out_le16(addr, val);
+ (void) in_le16(addr);
+ break;
+ default:
+ out_le32(addr, val);
+ (void) in_le32(addr);
+ break;
+ }
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static struct pci_ops u3_ht_pci_ops =
+{
+ u3_ht_read_config,
+ u3_ht_write_config
+};
+
+#endif /* CONFIG_POWER4 */
+
+/*
+ * For a bandit bridge, turn on cache coherency if necessary.
+ * N.B. we could clean this up using the hose ops directly.
+ */
+static void __init
+init_bandit(struct pci_controller *bp)
+{
+ unsigned int vendev, magic;
+ int rev;
+
+ /* read the word at offset 0 in config space for device 11 */
+ out_le32(bp->cfg_addr, (1UL << BANDIT_DEVNUM) + PCI_VENDOR_ID);
+ udelay(2);
+ vendev = in_le32(bp->cfg_data);
+ if (vendev == (PCI_DEVICE_ID_APPLE_BANDIT << 16) +
+ PCI_VENDOR_ID_APPLE) {
+ /* read the revision id */
+ out_le32(bp->cfg_addr,
+ (1UL << BANDIT_DEVNUM) + PCI_REVISION_ID);
+ udelay(2);
+ rev = in_8(bp->cfg_data);
+ if (rev != BANDIT_REVID)
+ printk(KERN_WARNING
+ "Unknown revision %d for bandit\n", rev);
+ } else if (vendev != (BANDIT_DEVID_2 << 16) + PCI_VENDOR_ID_APPLE) {
+ printk(KERN_WARNING "bandit isn't? (%x)\n", vendev);
+ return;
+ }
+
+ /* read the word at offset 0x50 */
+ out_le32(bp->cfg_addr, (1UL << BANDIT_DEVNUM) + BANDIT_MAGIC);
+ udelay(2);
+ magic = in_le32(bp->cfg_data);
+ if ((magic & BANDIT_COHERENT) != 0)
+ return;
+ magic |= BANDIT_COHERENT;
+ udelay(2);
+ out_le32(bp->cfg_data, magic);
+ printk(KERN_INFO "Cache coherency enabled for bandit/PSX\n");
+}
+
+
+/*
+ * Tweak the PCI-PCI bridge chip on the blue & white G3s.
+ */
+static void __init
+init_p2pbridge(void)
+{
+ struct device_node *p2pbridge;
+ struct pci_controller* hose;
+ u8 bus, devfn;
+ u16 val;
+
+ /* XXX it would be better here to identify the specific
+ PCI-PCI bridge chip we have. */
+ if ((p2pbridge = find_devices("pci-bridge")) == 0
+ || p2pbridge->parent == NULL
+ || strcmp(p2pbridge->parent->name, "pci") != 0)
+ return;
+ if (pci_device_from_OF_node(p2pbridge, &bus, &devfn) < 0) {
+ DBG("Can't find PCI infos for PCI<->PCI bridge\n");
+ return;
+ }
+ /* Warning: At this point, we have not yet renumbered all busses.
+ * So we must use OF walking to find out hose
+ */
+ hose = pci_find_hose_for_OF_device(p2pbridge);
+ if (!hose) {
+ DBG("Can't find hose for PCI<->PCI bridge\n");
+ return;
+ }
+ if (early_read_config_word(hose, bus, devfn,
+ PCI_BRIDGE_CONTROL, &val) < 0) {
+ printk(KERN_ERR "init_p2pbridge: couldn't read bridge control\n");
+ return;
+ }
+ val &= ~PCI_BRIDGE_CTL_MASTER_ABORT;
+ early_write_config_word(hose, bus, devfn, PCI_BRIDGE_CONTROL, val);
+}
+
+/*
+ * Some Apple desktop machines have a NEC PD720100A USB2 controller
+ * on the motherboard. Open Firmware, on these, will disable the
+ * EHCI part of it so it behaves like a pair of OHCI's. This fixup
+ * code re-enables it ;)
+ */
+static void __init
+fixup_nec_usb2(void)
+{
+ struct device_node *nec;
+
+ for (nec = NULL; (nec = of_find_node_by_name(nec, "usb")) != NULL;) {
+ struct pci_controller *hose;
+ u32 data, *prop;
+ u8 bus, devfn;
+
+ prop = (u32 *)get_property(nec, "vendor-id", NULL);
+ if (prop == NULL)
+ continue;
+ if (0x1033 != *prop)
+ continue;
+ prop = (u32 *)get_property(nec, "device-id", NULL);
+ if (prop == NULL)
+ continue;
+ if (0x0035 != *prop)
+ continue;
+ prop = (u32 *)get_property(nec, "reg", NULL);
+ if (prop == NULL)
+ continue;
+ devfn = (prop[0] >> 8) & 0xff;
+ bus = (prop[0] >> 16) & 0xff;
+ if (PCI_FUNC(devfn) != 0)
+ continue;
+ hose = pci_find_hose_for_OF_device(nec);
+ if (!hose)
+ continue;
+ early_read_config_dword(hose, bus, devfn, 0xe4, &data);
+ if (data & 1UL) {
+ printk("Found NEC PD720100A USB2 chip with disabled EHCI, fixing up...\n");
+ data &= ~1UL;
+ early_write_config_dword(hose, bus, devfn, 0xe4, data);
+ early_write_config_byte(hose, bus, devfn | 2, PCI_INTERRUPT_LINE,
+ nec->intrs[0].line);
+ }
+ }
+}
+
+void __init
+pmac_find_bridges(void)
+{
+ struct device_node *np, *root;
+ struct device_node *ht = NULL;
+
+ root = of_find_node_by_path("/");
+ if (root == NULL) {
+ printk(KERN_CRIT "pmac_find_bridges: can't find root of device tree\n");
+ return;
+ }
+ for (np = NULL; (np = of_get_next_child(root, np)) != NULL;) {
+ if (np->name == NULL)
+ continue;
+ if (strcmp(np->name, "bandit") == 0
+ || strcmp(np->name, "chaos") == 0
+ || strcmp(np->name, "pci") == 0) {
+ if (add_bridge(np) == 0)
+ of_node_get(np);
+ }
+ if (strcmp(np->name, "ht") == 0) {
+ of_node_get(np);
+ ht = np;
+ }
+ }
+ of_node_put(root);
+
+ /* Probe HT last as it relies on the agp resources to be already
+ * setup
+ */
+ if (ht && add_bridge(ht) != 0)
+ of_node_put(ht);
+
+ init_p2pbridge();
+ fixup_nec_usb2();
+
+ /* We are still having some issues with the Xserve G4, enabling
+ * some offset between bus number and domains for now when we
+ * assign all busses should help for now
+ */
+ if (pci_assign_all_busses)
+ pcibios_assign_bus_offset = 0x10;
+
+#ifdef CONFIG_POWER4
+ /* There is something wrong with DMA on U3/HT. I haven't figured out
+ * the details yet, but if I set the cache line size to 128 bytes like
+ * it should, I'm getting memory corruption caused by devices like
+ * sungem (even without the MWI bit set, but maybe sungem doesn't
+ * care). Right now, it appears that setting up a 64 bytes line size
+ * works properly, 64 bytes beeing the max transfer size of HT, I
+ * suppose this is related the way HT/PCI are hooked together. I still
+ * need to dive into more specs though to be really sure of what's
+ * going on. --BenH.
+ *
+ * Ok, apparently, it's just that HT can't do more than 64 bytes
+ * transactions. MWI seem to be meaningless there as well, it may
+ * be worth nop'ing out pci_set_mwi too though I haven't done that
+ * yet.
+ *
+ * Note that it's a bit different for whatever is in the AGP slot.
+ * For now, I don't care, but this can become a real issue, we
+ * should probably hook pci_set_mwi anyway to make sure it sets
+ * the real cache line size in there.
+ */
+ if (machine_is_compatible("MacRISC4"))
+ pci_cache_line_size = 16; /* 64 bytes */
+
+ pmac_check_ht_link();
+#endif /* CONFIG_POWER4 */
+}
+
+#define GRACKLE_CFA(b, d, o) (0x80 | ((b) << 8) | ((d) << 16) \
+ | (((o) & ~3) << 24))
+
+#define GRACKLE_PICR1_STG 0x00000040
+#define GRACKLE_PICR1_LOOPSNOOP 0x00000010
+
+/* N.B. this is called before bridges is initialized, so we can't
+ use grackle_pcibios_{read,write}_config_dword. */
+static inline void grackle_set_stg(struct pci_controller* bp, int enable)
+{
+ unsigned int val;
+
+ out_be32(bp->cfg_addr, GRACKLE_CFA(0, 0, 0xa8));
+ val = in_le32(bp->cfg_data);
+ val = enable? (val | GRACKLE_PICR1_STG) :
+ (val & ~GRACKLE_PICR1_STG);
+ out_be32(bp->cfg_addr, GRACKLE_CFA(0, 0, 0xa8));
+ out_le32(bp->cfg_data, val);
+ (void)in_le32(bp->cfg_data);
+}
+
+static inline void grackle_set_loop_snoop(struct pci_controller *bp, int enable)
+{
+ unsigned int val;
+
+ out_be32(bp->cfg_addr, GRACKLE_CFA(0, 0, 0xa8));
+ val = in_le32(bp->cfg_data);
+ val = enable? (val | GRACKLE_PICR1_LOOPSNOOP) :
+ (val & ~GRACKLE_PICR1_LOOPSNOOP);
+ out_be32(bp->cfg_addr, GRACKLE_CFA(0, 0, 0xa8));
+ out_le32(bp->cfg_data, val);
+ (void)in_le32(bp->cfg_data);
+}
+
+static int __init
+setup_uninorth(struct pci_controller* hose, struct reg_property* addr)
+{
+ pci_assign_all_busses = 1;
+ has_uninorth = 1;
+ hose->ops = &macrisc_pci_ops;
+ hose->cfg_addr = ioremap(addr->address + 0x800000, 0x1000);
+ hose->cfg_data = ioremap(addr->address + 0xc00000, 0x1000);
+ /* We "know" that the bridge at f2000000 has the PCI slots. */
+ return addr->address == 0xf2000000;
+}
+
+static void __init
+setup_bandit(struct pci_controller* hose, struct reg_property* addr)
+{
+ hose->ops = &macrisc_pci_ops;
+ hose->cfg_addr = ioremap(addr->address + 0x800000, 0x1000);
+ hose->cfg_data = ioremap(addr->address + 0xc00000, 0x1000);
+ init_bandit(hose);
+}
+
+static void __init
+setup_chaos(struct pci_controller* hose, struct reg_property* addr)
+{
+ /* assume a `chaos' bridge */
+ hose->ops = &chaos_pci_ops;
+ hose->cfg_addr = ioremap(addr->address + 0x800000, 0x1000);
+ hose->cfg_data = ioremap(addr->address + 0xc00000, 0x1000);
+}
+
+#ifdef CONFIG_POWER4
+
+static void __init
+setup_u3_agp(struct pci_controller* hose, struct reg_property* addr)
+{
+ /* On G5, we move AGP up to high bus number so we don't need
+ * to reassign bus numbers for HT. If we ever have P2P bridges
+ * on AGP, we'll have to move pci_assign_all_busses to the
+ * pci_controller structure so we enable it for AGP and not for
+ * HT childs.
+ * We hard code the address because of the different size of
+ * the reg address cell, we shall fix that by killing struct
+ * reg_property and using some accessor functions instead
+ */
+ hose->first_busno = 0xf0;
+ hose->last_busno = 0xff;
+ has_uninorth = 1;
+ hose->ops = &macrisc_pci_ops;
+ hose->cfg_addr = ioremap(0xf0000000 + 0x800000, 0x1000);
+ hose->cfg_data = ioremap(0xf0000000 + 0xc00000, 0x1000);
+
+ u3_agp = hose;
+}
+
+static void __init
+setup_u3_ht(struct pci_controller* hose, struct reg_property *addr)
+{
+ struct device_node *np = (struct device_node *)hose->arch_data;
+ int i, cur;
+
+ hose->ops = &u3_ht_pci_ops;
+
+ /* We hard code the address because of the different size of
+ * the reg address cell, we shall fix that by killing struct
+ * reg_property and using some accessor functions instead
+ */
+ hose->cfg_data = ioremap(0xf2000000, 0x02000000);
+
+ /*
+ * /ht node doesn't expose a "ranges" property, so we "remove" regions that
+ * have been allocated to AGP. So far, this version of the code doesn't assign
+ * any of the 0xfxxxxxxx "fine" memory regions to /ht.
+ * We need to fix that sooner or later by either parsing all child "ranges"
+ * properties or figuring out the U3 address space decoding logic and
+ * then read its configuration register (if any).
+ */
+ hose->io_base_phys = 0xf4000000;
+ hose->io_base_virt = ioremap(hose->io_base_phys, 0x00400000);
+ isa_io_base = (unsigned long) hose->io_base_virt;
+ hose->io_resource.name = np->full_name;
+ hose->io_resource.start = 0;
+ hose->io_resource.end = 0x003fffff;
+ hose->io_resource.flags = IORESOURCE_IO;
+ hose->pci_mem_offset = 0;
+ hose->first_busno = 0;
+ hose->last_busno = 0xef;
+ hose->mem_resources[0].name = np->full_name;
+ hose->mem_resources[0].start = 0x80000000;
+ hose->mem_resources[0].end = 0xefffffff;
+ hose->mem_resources[0].flags = IORESOURCE_MEM;
+
+ if (u3_agp == NULL) {
+ DBG("U3 has no AGP, using full resource range\n");
+ return;
+ }
+
+ /* We "remove" the AGP resources from the resources allocated to HT, that
+ * is we create "holes". However, that code does assumptions that so far
+ * happen to be true (cross fingers...), typically that resources in the
+ * AGP node are properly ordered
+ */
+ cur = 0;
+ for (i=0; i<3; i++) {
+ struct resource *res = &u3_agp->mem_resources[i];
+ if (res->flags != IORESOURCE_MEM)
+ continue;
+ /* We don't care about "fine" resources */
+ if (res->start >= 0xf0000000)
+ continue;
+ /* Check if it's just a matter of "shrinking" us in one direction */
+ if (hose->mem_resources[cur].start == res->start) {
+ DBG("U3/HT: shrink start of %d, %08lx -> %08lx\n",
+ cur, hose->mem_resources[cur].start, res->end + 1);
+ hose->mem_resources[cur].start = res->end + 1;
+ continue;
+ }
+ if (hose->mem_resources[cur].end == res->end) {
+ DBG("U3/HT: shrink end of %d, %08lx -> %08lx\n",
+ cur, hose->mem_resources[cur].end, res->start - 1);
+ hose->mem_resources[cur].end = res->start - 1;
+ continue;
+ }
+ /* No, it's not the case, we need a hole */
+ if (cur == 2) {
+ /* not enough resources to make a hole, we drop part of the range */
+ printk(KERN_WARNING "Running out of resources for /ht host !\n");
+ hose->mem_resources[cur].end = res->start - 1;
+ continue;
+ }
+ cur++;
+ DBG("U3/HT: hole, %d end at %08lx, %d start at %08lx\n",
+ cur-1, res->start - 1, cur, res->end + 1);
+ hose->mem_resources[cur].name = np->full_name;
+ hose->mem_resources[cur].flags = IORESOURCE_MEM;
+ hose->mem_resources[cur].start = res->end + 1;
+ hose->mem_resources[cur].end = hose->mem_resources[cur-1].end;
+ hose->mem_resources[cur-1].end = res->start - 1;
+ }
+}
+
+#endif /* CONFIG_POWER4 */
+
+void __init
+setup_grackle(struct pci_controller *hose)
+{
+ setup_indirect_pci(hose, 0xfec00000, 0xfee00000);
+ if (machine_is_compatible("AAPL,PowerBook1998"))
+ grackle_set_loop_snoop(hose, 1);
+#if 0 /* Disabled for now, HW problems ??? */
+ grackle_set_stg(hose, 1);
+#endif
+}
+
+/*
+ * We assume that if we have a G3 powermac, we have one bridge called
+ * "pci" (a MPC106) and no bandit or chaos bridges, and contrariwise,
+ * if we have one or more bandit or chaos bridges, we don't have a MPC106.
+ */
+static int __init
+add_bridge(struct device_node *dev)
+{
+ int len;
+ struct pci_controller *hose;
+ struct reg_property *addr;
+ char* disp_name;
+ int *bus_range;
+ int primary = 1;
+
+ DBG("Adding PCI host bridge %s\n", dev->full_name);
+
+ addr = (struct reg_property *) get_property(dev, "reg", &len);
+ if (addr == NULL || len < sizeof(*addr)) {
+ printk(KERN_WARNING "Can't use %s: no address\n",
+ dev->full_name);
+ return -ENODEV;
+ }
+ bus_range = (int *) get_property(dev, "bus-range", &len);
+ if (bus_range == NULL || len < 2 * sizeof(int)) {
+ printk(KERN_WARNING "Can't get bus-range for %s, assume bus 0\n",
+ dev->full_name);
+ }
+
+ hose = pcibios_alloc_controller();
+ if (!hose)
+ return -ENOMEM;
+ hose->arch_data = dev;
+ hose->first_busno = bus_range ? bus_range[0] : 0;
+ hose->last_busno = bus_range ? bus_range[1] : 0xff;
+
+ disp_name = NULL;
+#ifdef CONFIG_POWER4
+ if (device_is_compatible(dev, "u3-agp")) {
+ setup_u3_agp(hose, addr);
+ disp_name = "U3-AGP";
+ primary = 0;
+ } else if (device_is_compatible(dev, "u3-ht")) {
+ setup_u3_ht(hose, addr);
+ disp_name = "U3-HT";
+ primary = 1;
+ } else
+#endif /* CONFIG_POWER4 */
+ if (device_is_compatible(dev, "uni-north")) {
+ primary = setup_uninorth(hose, addr);
+ disp_name = "UniNorth";
+ } else if (strcmp(dev->name, "pci") == 0) {
+ /* XXX assume this is a mpc106 (grackle) */
+ setup_grackle(hose);
+ disp_name = "Grackle (MPC106)";
+ } else if (strcmp(dev->name, "bandit") == 0) {
+ setup_bandit(hose, addr);
+ disp_name = "Bandit";
+ } else if (strcmp(dev->name, "chaos") == 0) {
+ setup_chaos(hose, addr);
+ disp_name = "Chaos";
+ primary = 0;
+ }
+ printk(KERN_INFO "Found %s PCI host bridge at 0x%08x. Firmware bus number: %d->%d\n",
+ disp_name, addr->address, hose->first_busno, hose->last_busno);
+ DBG(" ->Hose at 0x%p, cfg_addr=0x%p,cfg_data=0x%p\n",
+ hose, hose->cfg_addr, hose->cfg_data);
+
+ /* Interpret the "ranges" property */
+ /* This also maps the I/O region and sets isa_io/mem_base */
+ pci_process_bridge_OF_ranges(hose, dev, primary);
+
+ /* Fixup "bus-range" OF property */
+ fixup_bus_range(dev);
+
+ return 0;
+}
+
+static void __init
+pcibios_fixup_OF_interrupts(void)
+{
+ struct pci_dev* dev = NULL;
+
+ /*
+ * Open Firmware often doesn't initialize the
+ * PCI_INTERRUPT_LINE config register properly, so we
+ * should find the device node and apply the interrupt
+ * obtained from the OF device-tree
+ */
+ for_each_pci_dev(dev) {
+ struct device_node *node;
+ node = pci_device_to_OF_node(dev);
+ /* this is the node, see if it has interrupts */
+ if (node && node->n_intrs > 0)
+ dev->irq = node->intrs[0].line;
+ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
+ }
+}
+
+void __init
+pmac_pcibios_fixup(void)
+{
+ /* Fixup interrupts according to OF tree */
+ pcibios_fixup_OF_interrupts();
+}
+
+int __pmac
+pmac_pci_enable_device_hook(struct pci_dev *dev, int initial)
+{
+ struct device_node* node;
+ int updatecfg = 0;
+ int uninorth_child;
+
+ node = pci_device_to_OF_node(dev);
+
+ /* We don't want to enable USB controllers absent from the OF tree
+ * (iBook second controller)
+ */
+ if (dev->vendor == PCI_VENDOR_ID_APPLE
+ && (dev->class == ((PCI_CLASS_SERIAL_USB << 8) | 0x10))
+ && !node) {
+ printk(KERN_INFO "Apple USB OHCI %s disabled by firmware\n",
+ pci_name(dev));
+ return -EINVAL;
+ }
+
+ if (!node)
+ return 0;
+
+ uninorth_child = node->parent &&
+ device_is_compatible(node->parent, "uni-north");
+
+ /* Firewire & GMAC were disabled after PCI probe, the driver is
+ * claiming them, we must re-enable them now.
+ */
+ if (uninorth_child && !strcmp(node->name, "firewire") &&
+ (device_is_compatible(node, "pci106b,18") ||
+ device_is_compatible(node, "pci106b,30") ||
+ device_is_compatible(node, "pci11c1,5811"))) {
+ pmac_call_feature(PMAC_FTR_1394_CABLE_POWER, node, 0, 1);
+ pmac_call_feature(PMAC_FTR_1394_ENABLE, node, 0, 1);
+ updatecfg = 1;
+ }
+ if (uninorth_child && !strcmp(node->name, "ethernet") &&
+ device_is_compatible(node, "gmac")) {
+ pmac_call_feature(PMAC_FTR_GMAC_ENABLE, node, 0, 1);
+ updatecfg = 1;
+ }
+
+ if (updatecfg) {
+ u16 cmd;
+
+ /*
+ * Make sure PCI is correctly configured
+ *
+ * We use old pci_bios versions of the function since, by
+ * default, gmac is not powered up, and so will be absent
+ * from the kernel initial PCI lookup.
+ *
+ * Should be replaced by 2.4 new PCI mechanisms and really
+ * register the device.
+ */
+ pci_read_config_word(dev, PCI_COMMAND, &cmd);
+ cmd |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | PCI_COMMAND_INVALIDATE;
+ pci_write_config_word(dev, PCI_COMMAND, cmd);
+ pci_write_config_byte(dev, PCI_LATENCY_TIMER, 16);
+ pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, pci_cache_line_size);
+ }
+
+ return 0;
+}
+
+/* We power down some devices after they have been probed. They'll
+ * be powered back on later on
+ */
+void __init
+pmac_pcibios_after_init(void)
+{
+ struct device_node* nd;
+
+#ifdef CONFIG_BLK_DEV_IDE
+ struct pci_dev *dev = NULL;
+
+ /* OF fails to initialize IDE controllers on macs
+ * (and maybe other machines)
+ *
+ * Ideally, this should be moved to the IDE layer, but we need
+ * to check specifically with Andre Hedrick how to do it cleanly
+ * since the common IDE code seem to care about the fact that the
+ * BIOS may have disabled a controller.
+ *
+ * -- BenH
+ */
+ for_each_pci_dev(dev) {
+ if ((dev->class >> 16) == PCI_BASE_CLASS_STORAGE)
+ pci_enable_device(dev);
+ }
+#endif /* CONFIG_BLK_DEV_IDE */
+
+ nd = find_devices("firewire");
+ while (nd) {
+ if (nd->parent && (device_is_compatible(nd, "pci106b,18") ||
+ device_is_compatible(nd, "pci106b,30") ||
+ device_is_compatible(nd, "pci11c1,5811"))
+ && device_is_compatible(nd->parent, "uni-north")) {
+ pmac_call_feature(PMAC_FTR_1394_ENABLE, nd, 0, 0);
+ pmac_call_feature(PMAC_FTR_1394_CABLE_POWER, nd, 0, 0);
+ }
+ nd = nd->next;
+ }
+ nd = find_devices("ethernet");
+ while (nd) {
+ if (nd->parent && device_is_compatible(nd, "gmac")
+ && device_is_compatible(nd->parent, "uni-north"))
+ pmac_call_feature(PMAC_FTR_GMAC_ENABLE, nd, 0, 0);
+ nd = nd->next;
+ }
+}
+
+void pmac_pci_fixup_cardbus(struct pci_dev* dev)
+{
+ if (_machine != _MACH_Pmac)
+ return;
+ /*
+ * Fix the interrupt routing on the various cardbus bridges
+ * used on powerbooks
+ */
+ if (dev->vendor != PCI_VENDOR_ID_TI)
+ return;
+ if (dev->device == PCI_DEVICE_ID_TI_1130 ||
+ dev->device == PCI_DEVICE_ID_TI_1131) {
+ u8 val;
+ /* Enable PCI interrupt */
+ if (pci_read_config_byte(dev, 0x91, &val) == 0)
+ pci_write_config_byte(dev, 0x91, val | 0x30);
+ /* Disable ISA interrupt mode */
+ if (pci_read_config_byte(dev, 0x92, &val) == 0)
+ pci_write_config_byte(dev, 0x92, val & ~0x06);
+ }
+ if (dev->device == PCI_DEVICE_ID_TI_1210 ||
+ dev->device == PCI_DEVICE_ID_TI_1211 ||
+ dev->device == PCI_DEVICE_ID_TI_1410 ||
+ dev->device == PCI_DEVICE_ID_TI_1510) {
+ u8 val;
+ /* 0x8c == TI122X_IRQMUX, 2 says to route the INTA
+ signal out the MFUNC0 pin */
+ if (pci_read_config_byte(dev, 0x8c, &val) == 0)
+ pci_write_config_byte(dev, 0x8c, (val & ~0x0f) | 2);
+ /* Disable ISA interrupt mode */
+ if (pci_read_config_byte(dev, 0x92, &val) == 0)
+ pci_write_config_byte(dev, 0x92, val & ~0x06);
+ }
+}
+
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_TI, PCI_ANY_ID, pmac_pci_fixup_cardbus);
+
+void pmac_pci_fixup_pciata(struct pci_dev* dev)
+{
+ u8 progif = 0;
+
+ /*
+ * On PowerMacs, we try to switch any PCI ATA controller to
+ * fully native mode
+ */
+ if (_machine != _MACH_Pmac)
+ return;
+ /* Some controllers don't have the class IDE */
+ if (dev->vendor == PCI_VENDOR_ID_PROMISE)
+ switch(dev->device) {
+ case PCI_DEVICE_ID_PROMISE_20246:
+ case PCI_DEVICE_ID_PROMISE_20262:
+ case PCI_DEVICE_ID_PROMISE_20263:
+ case PCI_DEVICE_ID_PROMISE_20265:
+ case PCI_DEVICE_ID_PROMISE_20267:
+ case PCI_DEVICE_ID_PROMISE_20268:
+ case PCI_DEVICE_ID_PROMISE_20269:
+ case PCI_DEVICE_ID_PROMISE_20270:
+ case PCI_DEVICE_ID_PROMISE_20271:
+ case PCI_DEVICE_ID_PROMISE_20275:
+ case PCI_DEVICE_ID_PROMISE_20276:
+ case PCI_DEVICE_ID_PROMISE_20277:
+ goto good;
+ }
+ /* Others, check PCI class */
+ if ((dev->class >> 8) != PCI_CLASS_STORAGE_IDE)
+ return;
+ good:
+ pci_read_config_byte(dev, PCI_CLASS_PROG, &progif);
+ if ((progif & 5) != 5) {
+ printk(KERN_INFO "Forcing PCI IDE into native mode: %s\n", pci_name(dev));
+ (void) pci_write_config_byte(dev, PCI_CLASS_PROG, progif|5);
+ if (pci_read_config_byte(dev, PCI_CLASS_PROG, &progif) ||
+ (progif & 5) != 5)
+ printk(KERN_ERR "Rewrite of PROGIF failed !\n");
+ }
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, pmac_pci_fixup_pciata);
+
+
+/*
+ * Disable second function on K2-SATA, it's broken
+ * and disable IO BARs on first one
+ */
+void __pmac pmac_pci_fixup_k2_sata(struct pci_dev* dev)
+{
+ int i;
+ u16 cmd;
+
+ if (PCI_FUNC(dev->devfn) > 0) {
+ pci_read_config_word(dev, PCI_COMMAND, &cmd);
+ cmd &= ~(PCI_COMMAND_IO | PCI_COMMAND_MEMORY);
+ pci_write_config_word(dev, PCI_COMMAND, cmd);
+ for (i = 0; i < 6; i++) {
+ dev->resource[i].start = dev->resource[i].end = 0;
+ dev->resource[i].flags = 0;
+ pci_write_config_dword(dev, PCI_BASE_ADDRESS_0 + 4 * i, 0);
+ }
+ } else {
+ pci_read_config_word(dev, PCI_COMMAND, &cmd);
+ cmd &= ~PCI_COMMAND_IO;
+ pci_write_config_word(dev, PCI_COMMAND, cmd);
+ for (i = 0; i < 5; i++) {
+ dev->resource[i].start = dev->resource[i].end = 0;
+ dev->resource[i].flags = 0;
+ pci_write_config_dword(dev, PCI_BASE_ADDRESS_0 + 4 * i, 0);
+ }
+ }
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SERVERWORKS, 0x0240, pmac_pci_fixup_k2_sata);
OpenPOWER on IntegriCloud