summaryrefslogtreecommitdiffstats
path: root/arch/ppc/platforms/katana.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/ppc/platforms/katana.c')
-rw-r--r--arch/ppc/platforms/katana.c253
1 files changed, 193 insertions, 60 deletions
diff --git a/arch/ppc/platforms/katana.c b/arch/ppc/platforms/katana.c
index 169dbf6534b9..2b53afae0e9c 100644
--- a/arch/ppc/platforms/katana.c
+++ b/arch/ppc/platforms/katana.c
@@ -33,6 +33,7 @@
#include <linux/bootimg.h>
#endif
#include <asm/io.h>
+#include <asm/unistd.h>
#include <asm/page.h>
#include <asm/time.h>
#include <asm/smp.h>
@@ -42,15 +43,14 @@
#include <asm/mv64x60.h>
#include <platforms/katana.h>
-static struct mv64x60_handle bh;
-static katana_id_t katana_id;
-static void __iomem *cpld_base;
-static void __iomem *sram_base;
-
-static u32 katana_flash_size_0;
-static u32 katana_flash_size_1;
-
-static u32 katana_bus_frequency;
+static struct mv64x60_handle bh;
+static katana_id_t katana_id;
+static void __iomem *cpld_base;
+static void __iomem *sram_base;
+static u32 katana_flash_size_0;
+static u32 katana_flash_size_1;
+static u32 katana_bus_frequency;
+static struct pci_controller katana_hose_a;
unsigned char __res[sizeof(bd_t)];
@@ -71,8 +71,12 @@ katana_irq_lookup_750i(unsigned char idsel, unsigned char pin)
KATANA_PCI_INTA_IRQ_750i, KATANA_PCI_INTB_IRQ_750i },
/* IDSEL 6 (T8110) */
{KATANA_PCI_INTD_IRQ_750i, 0, 0, 0 },
+ /* IDSEL 7 (unused) */
+ {0, 0, 0, 0 },
+ /* IDSEL 8 (Intel 82544) (752i only but doesn't harm 750i) */
+ {KATANA_PCI_INTD_IRQ_750i, 0, 0, 0 },
};
- const long min_idsel = 4, max_idsel = 6, irqs_per_slot = 4;
+ const long min_idsel = 4, max_idsel = 8, irqs_per_slot = 4;
return PCI_IRQ_TABLE_LOOKUP;
}
@@ -148,7 +152,7 @@ katana_get_proc_num(void)
save_exclude = mv64x60_pci_exclude_bridge;
mv64x60_pci_exclude_bridge = 0;
- early_read_config_word(bh.hose_a, 0,
+ early_read_config_word(bh.hose_b, 0,
PCI_DEVFN(0,0), PCI_DEVICE_ID, &val);
mv64x60_pci_exclude_bridge = save_exclude;
@@ -191,7 +195,8 @@ katana_setup_bridge(void)
struct mv64x60_setup_info si;
void __iomem *vaddr;
int i;
- u16 val;
+ u32 v;
+ u16 val, type;
u8 save_exclude;
/*
@@ -222,6 +227,20 @@ katana_setup_bridge(void)
PCI_DEVICE_ID, val);
}
+ /*
+ * While we're in here, set the hotswap register correctly.
+ * Turn off blue LED; mask ENUM#, clear insertion & extraction bits.
+ */
+ early_read_config_dword(&hose, 0, PCI_DEVFN(0, 0),
+ MV64360_PCICFG_CPCI_HOTSWAP, &v);
+ v &= ~(1<<19);
+ v |= ((1<<17) | (1<<22) | (1<<23));
+ early_write_config_dword(&hose, 0, PCI_DEVFN(0, 0),
+ MV64360_PCICFG_CPCI_HOTSWAP, v);
+
+ /* While we're at it, grab the bridge type for later */
+ early_read_config_word(&hose, 0, PCI_DEVFN(0, 0), PCI_DEVICE_ID, &type);
+
mv64x60_pci_exclude_bridge = save_exclude;
iounmap(vaddr);
@@ -251,21 +270,23 @@ katana_setup_bridge(void)
si.idma_options[i] = MV64360_IDMA2MEM_SNOOP_NONE;
si.pci_1.acc_cntl_options[i] =
- MV64360_PCI_ACC_CNTL_SNOOP_NONE |
- MV64360_PCI_ACC_CNTL_SWAP_NONE |
- MV64360_PCI_ACC_CNTL_MBURST_128_BYTES |
- MV64360_PCI_ACC_CNTL_RDSIZE_256_BYTES;
+ MV64360_PCI_ACC_CNTL_SNOOP_NONE |
+ MV64360_PCI_ACC_CNTL_SWAP_NONE |
+ MV64360_PCI_ACC_CNTL_MBURST_128_BYTES |
+ MV64360_PCI_ACC_CNTL_RDSIZE_256_BYTES;
#else
si.cpu_prot_options[i] = 0;
- si.enet_options[i] = MV64360_ENET2MEM_SNOOP_NONE; /* errata */
- si.mpsc_options[i] = MV64360_MPSC2MEM_SNOOP_NONE; /* errata */
- si.idma_options[i] = MV64360_IDMA2MEM_SNOOP_NONE; /* errata */
+ si.enet_options[i] = MV64360_ENET2MEM_SNOOP_WB;
+ si.mpsc_options[i] = MV64360_MPSC2MEM_SNOOP_WB;
+ si.idma_options[i] = MV64360_IDMA2MEM_SNOOP_WB;
si.pci_1.acc_cntl_options[i] =
- MV64360_PCI_ACC_CNTL_SNOOP_WB |
- MV64360_PCI_ACC_CNTL_SWAP_NONE |
- MV64360_PCI_ACC_CNTL_MBURST_32_BYTES |
- MV64360_PCI_ACC_CNTL_RDSIZE_32_BYTES;
+ MV64360_PCI_ACC_CNTL_SNOOP_WB |
+ MV64360_PCI_ACC_CNTL_SWAP_NONE |
+ MV64360_PCI_ACC_CNTL_MBURST_32_BYTES |
+ ((type == PCI_DEVICE_ID_MARVELL_MV64360) ?
+ MV64360_PCI_ACC_CNTL_RDSIZE_32_BYTES :
+ MV64360_PCI_ACC_CNTL_RDSIZE_256_BYTES);
#endif
}
@@ -281,12 +302,26 @@ katana_setup_bridge(void)
mv64x60_set_bus(&bh, 1, 0);
bh.hose_b->first_busno = 0;
bh.hose_b->last_busno = 0xff;
+
+ /*
+ * Need to access hotswap reg which is in the pci config area of the
+ * bridge's hose 0. Note that pcibios_alloc_controller() can't be used
+ * to alloc hose_a b/c that would make hose 0 known to the generic
+ * pci code which we don't want.
+ */
+ bh.hose_a = &katana_hose_a;
+ setup_indirect_pci_nomap(bh.hose_a,
+ bh.v_base + MV64x60_PCI0_CONFIG_ADDR,
+ bh.v_base + MV64x60_PCI0_CONFIG_DATA);
}
/* Bridge & platform setup routines */
void __init
katana_intr_setup(void)
{
+ if (bh.type == MV64x60_TYPE_MV64460) /* As per instns from Marvell */
+ mv64x60_clr_bits(&bh, MV64x60_CPU_MASTER_CNTL, 1 << 15);
+
/* MPP 8, 9, and 10 */
mv64x60_clr_bits(&bh, MV64x60_MPP_CNTL_1, 0xfff);
@@ -309,9 +344,16 @@ katana_intr_setup(void)
/* Config GPP intr ctlr to respond to level trigger */
mv64x60_set_bits(&bh, MV64x60_COMM_ARBITER_CNTL, (1<<10));
- /* Erranum FEr PCI-#8 */
- mv64x60_clr_bits(&bh, MV64x60_PCI0_CMD, (1<<5) | (1<<9));
- mv64x60_clr_bits(&bh, MV64x60_PCI1_CMD, (1<<5) | (1<<9));
+ if (bh.type == MV64x60_TYPE_MV64360) {
+ /* Erratum FEr PCI-#9 */
+ mv64x60_clr_bits(&bh, MV64x60_PCI1_CMD,
+ (1<<4) | (1<<5) | (1<<6) | (1<<7));
+ mv64x60_set_bits(&bh, MV64x60_PCI1_CMD, (1<<8) | (1<<9));
+ } else {
+ mv64x60_clr_bits(&bh, MV64x60_PCI1_CMD, (1<<6) | (1<<7));
+ mv64x60_set_bits(&bh, MV64x60_PCI1_CMD,
+ (1<<4) | (1<<5) | (1<<8) | (1<<9));
+ }
/*
* Dismiss and then enable interrupt on GPP interrupt cause
@@ -473,17 +515,46 @@ katana_setup_arch(void)
ppc_md.progress("katana_setup_arch: exit", 0);
}
+void
+katana_fixup_resources(struct pci_dev *dev)
+{
+ u16 v16;
+
+ pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, L1_CACHE_LINE_SIZE>>2);
+
+ pci_read_config_word(dev, PCI_COMMAND, &v16);
+ v16 |= PCI_COMMAND_INVALIDATE | PCI_COMMAND_FAST_BACK;
+ pci_write_config_word(dev, PCI_COMMAND, v16);
+}
+
+static const unsigned int cpu_750xx[32] = { /* 750FX & 750GX */
+ 0, 0, 2, 2, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15,/* 0-15*/
+ 16, 17, 18, 19, 20, 22, 24, 26, 28, 30, 32, 34, 36, 38, 40, 0 /*16-31*/
+};
+
+static int
+katana_get_cpu_freq(void)
+{
+ unsigned long pll_cfg;
+
+ pll_cfg = (mfspr(SPRN_HID1) & 0xf8000000) >> 27;
+ return katana_bus_frequency * cpu_750xx[pll_cfg]/2;
+}
+
/* Platform device data fixup routines. */
#if defined(CONFIG_SERIAL_MPSC)
static void __init
katana_fixup_mpsc_pdata(struct platform_device *pdev)
{
- struct mpsc_pdata *pdata;
+ struct mpsc_pdata *pdata = (struct mpsc_pdata *)pdev->dev.platform_data;
+ bd_t *bdp = (bd_t *)__res;
- pdata = (struct mpsc_pdata *)pdev->dev.platform_data;
+ if (bdp->bi_baudrate)
+ pdata->default_baud = bdp->bi_baudrate;
+ else
+ pdata->default_baud = KATANA_DEFAULT_BAUD;
pdata->max_idle = 40;
- pdata->default_baud = KATANA_DEFAULT_BAUD;
pdata->brg_clk_src = KATANA_MPSC_CLK_SRC;
/*
* TCLK (not SysCLk) is routed to BRG, then to the MPSC. On most parts,
@@ -513,6 +584,18 @@ katana_fixup_eth_pdata(struct platform_device *pdev)
}
#endif
+#if defined(CONFIG_SYSFS)
+static void __init
+katana_fixup_mv64xxx_pdata(struct platform_device *pdev)
+{
+ struct mv64xxx_pdata *pdata = (struct mv64xxx_pdata *)
+ pdev->dev.platform_data;
+
+ /* Katana supports the mv64xxx hotswap register */
+ pdata->hs_reg_valid = 1;
+}
+#endif
+
static int __init
katana_platform_notify(struct device *dev)
{
@@ -529,6 +612,9 @@ katana_platform_notify(struct device *dev)
{ MV643XX_ETH_NAME ".1", katana_fixup_eth_pdata },
{ MV643XX_ETH_NAME ".2", katana_fixup_eth_pdata },
#endif
+#if defined(CONFIG_SYSFS)
+ { MV64XXX_DEV_NAME ".0", katana_fixup_mv64xxx_pdata },
+#endif
};
struct platform_device *pdev;
int i;
@@ -536,8 +622,7 @@ katana_platform_notify(struct device *dev)
if (dev && dev->bus_id)
for (i=0; i<ARRAY_SIZE(dev_map); i++)
if (!strncmp(dev->bus_id, dev_map[i].bus_id,
- BUS_ID_SIZE)) {
-
+ BUS_ID_SIZE)) {
pdev = container_of(dev,
struct platform_device, dev);
dev_map[i].rtn(pdev);
@@ -578,8 +663,7 @@ katana_setup_mtd(void)
ptbl_entries = (size >= (64*MB)) ? 6 : 4;
if ((ptbl = kmalloc(ptbl_entries * sizeof(struct mtd_partition),
- GFP_KERNEL)) == NULL) {
-
+ GFP_KERNEL)) == NULL) {
printk(KERN_WARNING "Can't alloc MTD partition table\n");
return -ENOMEM;
}
@@ -611,7 +695,6 @@ katana_setup_mtd(void)
physmap_set_partitions(ptbl, ptbl_entries);
return 0;
}
-
arch_initcall(katana_setup_mtd);
#endif
@@ -632,7 +715,22 @@ katana_halt(void)
{
u8 v;
- if (katana_id == KATANA_ID_752I) {
+ /* Turn on blue LED to indicate its okay to remove */
+ if (katana_id == KATANA_ID_750I) {
+ u32 v;
+ u8 save_exclude;
+
+ /* Set LOO bit in cPCI HotSwap reg of hose 0 to turn on LED. */
+ save_exclude = mv64x60_pci_exclude_bridge;
+ mv64x60_pci_exclude_bridge = 0;
+ early_read_config_dword(bh.hose_a, 0, PCI_DEVFN(0, 0),
+ MV64360_PCICFG_CPCI_HOTSWAP, &v);
+ v &= 0xff;
+ v |= (1 << 19);
+ early_write_config_dword(bh.hose_a, 0, PCI_DEVFN(0, 0),
+ MV64360_PCICFG_CPCI_HOTSWAP, v);
+ mv64x60_pci_exclude_bridge = save_exclude;
+ } else if (katana_id == KATANA_ID_752I) {
v = in_8(cpld_base + HSL_PLD_BASE + HSL_PLD_HOT_SWAP_OFF);
v |= HSL_PLD_HOT_SWAP_LED_BIT;
out_8(cpld_base + HSL_PLD_BASE + HSL_PLD_HOT_SWAP_OFF, v);
@@ -652,37 +750,65 @@ katana_power_off(void)
static int
katana_show_cpuinfo(struct seq_file *m)
{
+ char *s;
+
+ seq_printf(m, "cpu freq\t: %dMHz\n",
+ (katana_get_cpu_freq() + 500000) / 1000000);
+ seq_printf(m, "bus freq\t: %ldMHz\n",
+ ((long)katana_bus_frequency + 500000) / 1000000);
seq_printf(m, "vendor\t\t: Artesyn Communication Products, LLC\n");
seq_printf(m, "board\t\t: ");
-
switch (katana_id) {
case KATANA_ID_3750:
- seq_printf(m, "Katana 3750\n");
+ seq_printf(m, "Katana 3750");
break;
case KATANA_ID_750I:
- seq_printf(m, "Katana 750i\n");
+ seq_printf(m, "Katana 750i");
break;
case KATANA_ID_752I:
- seq_printf(m, "Katana 752i\n");
+ seq_printf(m, "Katana 752i");
break;
default:
- seq_printf(m, "Unknown\n");
+ seq_printf(m, "Unknown");
break;
}
-
- seq_printf(m, "product ID\t: 0x%x\n",
+ seq_printf(m, " (product id: 0x%x)\n",
in_8(cpld_base + KATANA_CPLD_PRODUCT_ID));
+
+ seq_printf(m, "pci mode\t: %sMonarch\n",
+ katana_is_monarch()? "" : "Non-");
seq_printf(m, "hardware rev\t: 0x%x\n",
in_8(cpld_base+KATANA_CPLD_HARDWARE_VER));
- seq_printf(m, "PLD rev\t\t: 0x%x\n",
+ seq_printf(m, "pld rev\t\t: 0x%x\n",
in_8(cpld_base + KATANA_CPLD_PLD_VER));
- seq_printf(m, "PLB freq\t: %ldMhz\n",
- (long)katana_bus_frequency / 1000000);
- seq_printf(m, "PCI\t\t: %sMonarch\n", katana_is_monarch()? "" : "Non-");
+
+ switch(bh.type) {
+ case MV64x60_TYPE_GT64260A:
+ s = "gt64260a";
+ break;
+ case MV64x60_TYPE_GT64260B:
+ s = "gt64260b";
+ break;
+ case MV64x60_TYPE_MV64360:
+ s = "mv64360";
+ break;
+ case MV64x60_TYPE_MV64460:
+ s = "mv64460";
+ break;
+ default:
+ s = "Unknown";
+ }
+ seq_printf(m, "bridge type\t: %s\n", s);
+ seq_printf(m, "bridge rev\t: 0x%x\n", bh.rev);
+#if defined(CONFIG_NOT_COHERENT_CACHE)
+ seq_printf(m, "coherency\t: %s\n", "off");
+#else
+ seq_printf(m, "coherency\t: %s\n", "on");
+#endif
return 0;
}
@@ -701,11 +827,20 @@ katana_calibrate_decr(void)
tb_to_us = mulhwu_scale_factor(freq, 1000000);
}
+/*
+ * The katana supports both uImage and zImage. If uImage, get the mem size
+ * from the bd info. If zImage, the bootwrapper adds a BI_MEMSIZE entry in
+ * the bi_rec data which is sucked out and put into boot_mem_size by
+ * parse_bootinfo(). MMU_init() will then use the boot_mem_size for the mem
+ * size and not call this routine. The only way this will fail is when a uImage
+ * is used but the fw doesn't pass in a valid bi_memsize. This should never
+ * happen, though.
+ */
unsigned long __init
katana_find_end_of_memory(void)
{
- return mv64x60_get_mem_size(CONFIG_MV64X60_NEW_BASE,
- MV64x60_TYPE_MV64360);
+ bd_t *bdp = (bd_t *)__res;
+ return bdp->bi_memsize;
}
#if defined(CONFIG_I2C_MV64XXX) && defined(CONFIG_SENSORS_M41T00)
@@ -729,15 +864,6 @@ katana_rtc_hookup(void)
late_initcall(katana_rtc_hookup);
#endif
-static inline void
-katana_set_bat(void)
-{
- mb();
- mtspr(SPRN_DBAT2U, 0xf0001ffe);
- mtspr(SPRN_DBAT2L, 0xf000002a);
- mb();
-}
-
#if defined(CONFIG_SERIAL_TEXT_DEBUG) && defined(CONFIG_SERIAL_MPSC_CONSOLE)
static void __init
katana_map_io(void)
@@ -763,15 +889,24 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
*/
if (r3 && r6) {
/* copy board info structure */
- memcpy( (void *)__res,(void *)(r3+KERNELBASE), sizeof(bd_t) );
+ memcpy((void *)__res, (void *)(r3+KERNELBASE), sizeof(bd_t));
/* copy command line */
*(char *)(r7+KERNELBASE) = 0;
strcpy(cmd_line, (char *)(r6+KERNELBASE));
}
+#ifdef CONFIG_BLK_DEV_INITRD
+ /* take care of initrd if we have one */
+ if (r4) {
+ initrd_start = r4 + KERNELBASE;
+ initrd_end = r5 + KERNELBASE;
+ }
+#endif /* CONFIG_BLK_DEV_INITRD */
+
isa_mem_base = 0;
ppc_md.setup_arch = katana_setup_arch;
+ ppc_md.pcibios_fixup_resources = katana_fixup_resources;
ppc_md.show_cpuinfo = katana_show_cpuinfo;
ppc_md.init_IRQ = mv64360_init_irq;
ppc_md.get_irq = mv64360_get_irq;
@@ -790,6 +925,4 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
#if defined(CONFIG_SERIAL_MPSC) || defined(CONFIG_MV643XX_ETH)
platform_notify = katana_platform_notify;
#endif
-
- katana_set_bat(); /* Need for katana_find_end_of_memory and progress */
}
OpenPOWER on IntegriCloud