diff options
Diffstat (limited to 'arch/powerpc')
| -rw-r--r-- | arch/powerpc/platforms/86xx/mpc8610_hpcd.c | 97 |
1 files changed, 64 insertions, 33 deletions
diff --git a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c index efadd3be8e6e..a896511690c2 100644 --- a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c +++ b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c @@ -105,45 +105,77 @@ machine_device_initcall(mpc86xx_hpcd, mpc8610_declare_of_platform_devices); #if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE) -static u32 get_busfreq(void) -{ - struct device_node *node; - - u32 fs_busfreq = 0; - node = of_find_node_by_type(NULL, "cpu"); - if (node) { - unsigned int size; - const unsigned int *prop = - of_get_property(node, "bus-frequency", &size); - if (prop) - fs_busfreq = *prop; - of_node_put(node); - }; - return fs_busfreq; -} +/* + * DIU Area Descriptor + * + * The MPC8610 reference manual shows the bits of the AD register in + * little-endian order, which causes the BLUE_C field to be split into two + * parts. To simplify the definition of the MAKE_AD() macro, we define the + * fields in big-endian order and byte-swap the result. + * + * So even though the registers don't look like they're in the + * same bit positions as they are on the P1022, the same value is written to + * the AD register on the MPC8610 and on the P1022. + */ +#define AD_BYTE_F 0x10000000 +#define AD_ALPHA_C_MASK 0x0E000000 +#define AD_ALPHA_C_SHIFT 25 +#define AD_BLUE_C_MASK 0x01800000 +#define AD_BLUE_C_SHIFT 23 +#define AD_GREEN_C_MASK 0x00600000 +#define AD_GREEN_C_SHIFT 21 +#define AD_RED_C_MASK 0x00180000 +#define AD_RED_C_SHIFT 19 +#define AD_PALETTE 0x00040000 +#define AD_PIXEL_S_MASK 0x00030000 +#define AD_PIXEL_S_SHIFT 16 +#define AD_COMP_3_MASK 0x0000F000 +#define AD_COMP_3_SHIFT 12 +#define AD_COMP_2_MASK 0x00000F00 +#define AD_COMP_2_SHIFT 8 +#define AD_COMP_1_MASK 0x000000F0 +#define AD_COMP_1_SHIFT 4 +#define AD_COMP_0_MASK 0x0000000F +#define AD_COMP_0_SHIFT 0 + +#define MAKE_AD(alpha, red, blue, green, size, c0, c1, c2, c3) \ + cpu_to_le32(AD_BYTE_F | (alpha << AD_ALPHA_C_SHIFT) | \ + (blue << AD_BLUE_C_SHIFT) | (green << AD_GREEN_C_SHIFT) | \ + (red << AD_RED_C_SHIFT) | (c3 << AD_COMP_3_SHIFT) | \ + (c2 << AD_COMP_2_SHIFT) | (c1 << AD_COMP_1_SHIFT) | \ + (c0 << AD_COMP_0_SHIFT) | (size << AD_PIXEL_S_SHIFT)) unsigned int mpc8610hpcd_get_pixel_format(unsigned int bits_per_pixel, int monitor_port) { static const unsigned long pixelformat[][3] = { - {0x88882317, 0x88083218, 0x65052119}, - {0x88883316, 0x88082219, 0x65053118}, + { + MAKE_AD(3, 0, 2, 1, 3, 8, 8, 8, 8), + MAKE_AD(4, 2, 0, 1, 2, 8, 8, 8, 0), + MAKE_AD(4, 0, 2, 1, 1, 5, 6, 5, 0) + }, + { + MAKE_AD(3, 2, 0, 1, 3, 8, 8, 8, 8), + MAKE_AD(4, 0, 2, 1, 2, 8, 8, 8, 0), + MAKE_AD(4, 2, 0, 1, 1, 5, 6, 5, 0) + }, }; - unsigned int pix_fmt, arch_monitor; + unsigned int arch_monitor; + /* The DVI port is mis-wired on revision 1 of this board. */ arch_monitor = ((*pixis_arch == 0x01) && (monitor_port == 0))? 0 : 1; - /* DVI port for board version 0x01 */ - - if (bits_per_pixel == 32) - pix_fmt = pixelformat[arch_monitor][0]; - else if (bits_per_pixel == 24) - pix_fmt = pixelformat[arch_monitor][1]; - else if (bits_per_pixel == 16) - pix_fmt = pixelformat[arch_monitor][2]; - else - pix_fmt = pixelformat[1][0]; - - return pix_fmt; + + switch (bits_per_pixel) { + case 32: + return pixelformat[arch_monitor][0]; + case 24: + return pixelformat[arch_monitor][1]; + case 16: + return pixelformat[arch_monitor][2]; + default: + pr_err("fsl-diu: unsupported pixel depth %u\n", bits_per_pixel); + return 0; + } } void mpc8610hpcd_set_gamma_table(int monitor_port, char *gamma_table_base) @@ -190,8 +222,7 @@ void mpc8610hpcd_set_pixel_clock(unsigned int pixclock) } /* Pixel Clock configuration */ - pr_debug("DIU: Bus Frequency = %d\n", get_busfreq()); - speed_ccb = get_busfreq(); + speed_ccb = fsl_get_sys_freq(); /* Calculate the pixel clock with the smallest error */ /* calculate the following in steps to avoid overflow */ |
