diff options
Diffstat (limited to 'arch/powerpc')
21 files changed, 511 insertions, 639 deletions
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 39ca7b9da369..0e4617104f8c 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -50,7 +50,7 @@ config PPC config EARLY_PRINTK bool - default y if PPC64 + default y config COMPAT bool diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index bf3fd6f02249..89714929f444 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -18,7 +18,7 @@ obj-y += vdso32/ obj-$(CONFIG_PPC64) += setup_64.o binfmt_elf32.o sys_ppc32.o \ signal_64.o ptrace32.o systbl.o \ paca.o ioctl32.o cpu_setup_power4.o \ - firmware.o sysfs.o udbg.o idle_64.o + firmware.o sysfs.o idle_64.o obj-$(CONFIG_PPC64) += vdso64/ obj-$(CONFIG_ALTIVEC) += vecemu.o vector.o obj-$(CONFIG_POWER4) += idle_power4.o @@ -46,7 +46,7 @@ extra-$(CONFIG_8xx) := head_8xx.o extra-y += vmlinux.lds obj-y += process.o init_task.o time.o \ - prom.o traps.o setup-common.o + prom.o traps.o setup-common.o udbg.o obj-$(CONFIG_PPC32) += entry_32.o setup_32.o misc_32.o systbl.o obj-$(CONFIG_PPC64) += misc_64.o dma_64.o iommu.o obj-$(CONFIG_PPC_OF) += prom_init.o @@ -56,8 +56,7 @@ obj-$(CONFIG_6xx) += idle_6xx.o obj-$(CONFIG_SMP) += smp.o obj-$(CONFIG_KPROBES) += kprobes.o obj-$(CONFIG_PPC_MULTIPLATFORM) += legacy_serial.o -obj64-$(CONFIG_PPC_MULTIPLATFORM) += udbg_16550.o -obj64-$(CONFIG_PPC_PMAC) += udbg_scc.o +obj-$(CONFIG_PPC_MULTIPLATFORM) += udbg_16550.o module-$(CONFIG_PPC64) += module_64.o obj-$(CONFIG_MODULES) += $(module-y) diff --git a/arch/powerpc/kernel/btext.c b/arch/powerpc/kernel/btext.c index bdfba92b2b38..893dd24a9f67 100644 --- a/arch/powerpc/kernel/btext.c +++ b/arch/powerpc/kernel/btext.c @@ -31,15 +31,18 @@ static void draw_byte_32(unsigned char *bits, unsigned int *base, int rb); static void draw_byte_16(unsigned char *bits, unsigned int *base, int rb); static void draw_byte_8(unsigned char *bits, unsigned int *base, int rb); -static int g_loc_X; -static int g_loc_Y; -static int g_max_loc_X; -static int g_max_loc_Y; +#define __force_data __attribute__((__section__(".data"))) -static int dispDeviceRowBytes; -static int dispDeviceDepth; -static int dispDeviceRect[4]; -static unsigned char *dispDeviceBase, *logicalDisplayBase; +static int g_loc_X __force_data; +static int g_loc_Y __force_data; +static int g_max_loc_X __force_data; +static int g_max_loc_Y __force_data; + +static int dispDeviceRowBytes __force_data; +static int dispDeviceDepth __force_data; +static int dispDeviceRect[4] __force_data; +static unsigned char *dispDeviceBase __force_data; +static unsigned char *logicalDisplayBase __force_data; unsigned long disp_BAT[2] __initdata = {0, 0}; @@ -47,7 +50,7 @@ unsigned long disp_BAT[2] __initdata = {0, 0}; static unsigned char vga_font[cmapsz]; -int boot_text_mapped; +int boot_text_mapped __force_data = 0; int force_printk_to_btext = 0; #ifdef CONFIG_PPC32 @@ -66,8 +69,7 @@ int force_printk_to_btext = 0; * is really badly aligned, but I didn't encounter this case * yet. */ -void __init -btext_prepare_BAT(void) +void __init btext_prepare_BAT(void) { unsigned long vaddr = KERNELBASE + 0x10000000; unsigned long addr; @@ -95,12 +97,13 @@ btext_prepare_BAT(void) } #endif -/* This function will enable the early boot text when doing OF booting. This - * way, xmon output should work too + +/* This function can be used to enable the early boot text when doing + * OF booting or within bootx init. It must be followed by a btext_unmap() + * call before the logical address becomes unuseable */ -void __init -btext_setup_display(int width, int height, int depth, int pitch, - unsigned long address) +void __init btext_setup_display(int width, int height, int depth, int pitch, + unsigned long address) { g_loc_X = 0; g_loc_Y = 0; @@ -116,6 +119,11 @@ btext_setup_display(int width, int height, int depth, int pitch, boot_text_mapped = 1; } +void __init btext_unmap(void) +{ + boot_text_mapped = 0; +} + /* Here's a small text engine to use during early boot * or for debugging purposes * @@ -127,7 +135,7 @@ btext_setup_display(int width, int height, int depth, int pitch, * changes. */ -void map_boot_text(void) +static void map_boot_text(void) { unsigned long base, offset, size; unsigned char *vbase; @@ -175,8 +183,9 @@ int btext_initialize(struct device_node *np) if (prop) address = *prop; - /* FIXME: Add support for PCI reg properties */ - + /* FIXME: Add support for PCI reg properties. Right now, only + * reliable on macs + */ if (address == 0) return -EINVAL; @@ -184,7 +193,6 @@ int btext_initialize(struct device_node *np) g_loc_Y = 0; g_max_loc_X = width / 8; g_max_loc_Y = height / 16; - logicalDisplayBase = (unsigned char *)address; dispDeviceBase = (unsigned char *)address; dispDeviceRowBytes = pitch; dispDeviceDepth = depth; @@ -197,7 +205,7 @@ int btext_initialize(struct device_node *np) return 0; } -void __init init_boot_display(void) +int __init btext_find_display(int allow_nonstdout) { char *name; struct device_node *np = NULL; @@ -218,8 +226,8 @@ void __init init_boot_display(void) } if (np) rc = btext_initialize(np); - if (rc == 0) - return; + if (rc == 0 || !allow_nonstdout) + return rc; for (np = NULL; (np = of_find_node_by_type(np, "display"));) { if (get_property(np, "linux,opened", NULL)) { @@ -228,8 +236,9 @@ void __init init_boot_display(void) printk("result: %d\n", rc); } if (rc == 0) - return; + break; } + return rc; } /* Calc the base address of a given point (x,y) */ @@ -277,44 +286,83 @@ EXPORT_SYMBOL(btext_update_display); void btext_clearscreen(void) { - unsigned long *base = (unsigned long *)calc_base(0, 0); + unsigned int *base = (unsigned int *)calc_base(0, 0); unsigned long width = ((dispDeviceRect[2] - dispDeviceRect[0]) * - (dispDeviceDepth >> 3)) >> 3; + (dispDeviceDepth >> 3)) >> 2; int i,j; for (i=0; i<(dispDeviceRect[3] - dispDeviceRect[1]); i++) { - unsigned long *ptr = base; + unsigned int *ptr = base; for(j=width; j; --j) *(ptr++) = 0; - base += (dispDeviceRowBytes >> 3); + base += (dispDeviceRowBytes >> 2); + } +} + +void btext_flushscreen(void) +{ + unsigned int *base = (unsigned int *)calc_base(0, 0); + unsigned long width = ((dispDeviceRect[2] - dispDeviceRect[0]) * + (dispDeviceDepth >> 3)) >> 2; + int i,j; + + for (i=0; i < (dispDeviceRect[3] - dispDeviceRect[1]); i++) + { + unsigned int *ptr = base; + for(j = width; j > 0; j -= 8) { + __asm__ __volatile__ ("dcbst 0,%0" :: "r" (ptr)); + ptr += 8; + } + base += (dispDeviceRowBytes >> 2); } + __asm__ __volatile__ ("sync" ::: "memory"); } +void btext_flushline(void) +{ + unsigned int *base = (unsigned int *)calc_base(0, g_loc_Y << 4); + unsigned long width = ((dispDeviceRect[2] - dispDeviceRect[0]) * + (dispDeviceDepth >> 3)) >> 2; + int i,j; + + for (i=0; i < 16; i++) + { + unsigned int *ptr = base; + for(j = width; j > 0; j -= 8) { + __asm__ __volatile__ ("dcbst 0,%0" :: "r" (ptr)); + ptr += 8; + } + base += (dispDeviceRowBytes >> 2); + } + __asm__ __volatile__ ("sync" ::: "memory"); +} + + #ifndef NO_SCROLL static void scrollscreen(void) { - unsigned long *src = (unsigned long *)calc_base(0,16); - unsigned long *dst = (unsigned long *)calc_base(0,0); + unsigned int *src = (unsigned int *)calc_base(0,16); + unsigned int *dst = (unsigned int *)calc_base(0,0); unsigned long width = ((dispDeviceRect[2] - dispDeviceRect[0]) * - (dispDeviceDepth >> 3)) >> 3; + (dispDeviceDepth >> 3)) >> 2; int i,j; for (i=0; i<(dispDeviceRect[3] - dispDeviceRect[1] - 16); i++) { - unsigned long *src_ptr = src; - unsigned long *dst_ptr = dst; + unsigned int *src_ptr = src; + unsigned int *dst_ptr = dst; for(j=width; j; --j) *(dst_ptr++) = *(src_ptr++); - src += (dispDeviceRowBytes >> 3); - dst += (dispDeviceRowBytes >> 3); + src += (dispDeviceRowBytes >> 2); + dst += (dispDeviceRowBytes >> 2); } for (i=0; i<16; i++) { - unsigned long *dst_ptr = dst; + unsigned int *dst_ptr = dst; for(j=width; j; --j) *(dst_ptr++) = 0; - dst += (dispDeviceRowBytes >> 3); + dst += (dispDeviceRowBytes >> 2); } } #endif /* ndef NO_SCROLL */ @@ -377,6 +425,14 @@ void btext_drawstring(const char *c) btext_drawchar(*c++); } +void btext_drawtext(const char *c, unsigned int len) +{ + if (!boot_text_mapped) + return; + while (len--) + btext_drawchar(*c++); +} + void btext_drawhex(unsigned long v) { char *hex_table = "0123456789abcdef"; diff --git a/arch/powerpc/kernel/head_32.S b/arch/powerpc/kernel/head_32.S index ccdf94731e30..fdd34dbd8797 100644 --- a/arch/powerpc/kernel/head_32.S +++ b/arch/powerpc/kernel/head_32.S @@ -153,6 +153,9 @@ __after_mmu_off: bl flush_tlbs bl initial_bats +#if !defined(CONFIG_APUS) && defined(CONFIG_BOOTX_TEXT) + bl setup_disp_bat +#endif /* * Call setup_cpu for CPU 0 and initialize 6xx Idle @@ -1306,6 +1309,32 @@ initial_bats: blr +#if !defined(CONFIG_APUS) && defined(CONFIG_BOOTX_TEXT) +setup_disp_bat: + /* + * setup the display bat prepared for us in prom.c + */ + mflr r8 + bl reloc_offset + mtlr r8 + addis r8,r3,disp_BAT@ha + addi r8,r8,disp_BAT@l + cmpwi cr0,r8,0 + beqlr + lwz r11,0(r8) + lwz r8,4(r8) + mfspr r9,SPRN_PVR + rlwinm r9,r9,16,16,31 /* r9 = 1 for 601, 4 for 604 */ + cmpwi 0,r9,1 + beq 1f + mtspr SPRN_DBAT3L,r8 + mtspr SPRN_DBAT3U,r11 + blr +1: mtspr SPRN_IBAT3L,r8 + mtspr SPRN_IBAT3U,r11 + blr +#endif /* !defined(CONFIG_APUS) && defined(CONFIG_BOOTX_TEXT) */ + #ifdef CONFIG_8260 /* Jump into the system reset for the rom. * We first disable the MMU, and then jump to the ROM reset address. diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c index 02baacf04366..79d434fc14d2 100644 --- a/arch/powerpc/kernel/setup_32.c +++ b/arch/powerpc/kernel/setup_32.c @@ -40,6 +40,7 @@ #include <asm/xmon.h> #include <asm/time.h> #include <asm/serial.h> +#include <asm/udbg.h> #include "setup.h" @@ -173,12 +174,23 @@ void __init platform_init(void) */ void __init machine_init(unsigned long dt_ptr, unsigned long phys) { + /* If btext is enabled, we might have a BAT setup for early display, + * thus we do enable some very basic udbg output + */ +#ifdef CONFIG_BOOTX_TEXT + udbg_putc = btext_drawchar; +#endif + + /* Do some early initialization based on the flat device tree */ early_init_devtree(__va(dt_ptr)); + /* Check default command line */ #ifdef CONFIG_CMDLINE - strlcpy(cmd_line, CONFIG_CMDLINE, sizeof(cmd_line)); + if (cmd_line[0] == 0) + strlcpy(cmd_line, CONFIG_CMDLINE, sizeof(cmd_line)); #endif /* CONFIG_CMDLINE */ + /* Base init based on machine type */ platform_init(); #ifdef CONFIG_6xx @@ -294,21 +306,11 @@ void __init setup_arch(char **cmdline_p) smp_setup_cpu_maps(); -#ifdef CONFIG_BOOTX_TEXT - init_boot_display(); -#endif - -#ifdef CONFIG_PPC_PMAC - /* This could be called "early setup arch", it must be done - * now because xmon need it - */ - if (_machine == _MACH_Pmac) - pmac_feature_init(); /* New cool way */ -#endif - #ifdef CONFIG_XMON_DEFAULT xmon_init(1); #endif + /* Register early console */ + register_early_udbg_console(); #if defined(CONFIG_KGDB) if (ppc_md.kgdb_map_scc) diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c index 0fc442ad1d26..65603e9af984 100644 --- a/arch/powerpc/kernel/setup_64.c +++ b/arch/powerpc/kernel/setup_64.c @@ -474,10 +474,6 @@ void __init setup_system(void) */ finish_device_tree(); -#ifdef CONFIG_BOOTX_TEXT - init_boot_display(); -#endif - /* * Initialize xmon */ diff --git a/arch/powerpc/kernel/udbg.c b/arch/powerpc/kernel/udbg.c index 2e372477d22a..cc2df5e61bb0 100644 --- a/arch/powerpc/kernel/udbg.c +++ b/arch/powerpc/kernel/udbg.c @@ -16,8 +16,8 @@ #include <linux/console.h> #include <asm/processor.h> -void (*udbg_putc)(unsigned char c); -unsigned char (*udbg_getc)(void); +void (*udbg_putc)(char c); +char (*udbg_getc)(void); int (*udbg_getc_poll)(void); /* udbg library, used by xmon et al */ @@ -78,7 +78,7 @@ int udbg_read(char *buf, int buflen) #define UDBG_BUFSIZE 256 void udbg_printf(const char *fmt, ...) { - unsigned char buf[UDBG_BUFSIZE]; + char buf[UDBG_BUFSIZE]; va_list args; va_start(args, fmt); @@ -116,6 +116,8 @@ void __init disable_early_printk(void) /* called by setup_system */ void register_early_udbg_console(void) { + if (early_console_initialized) + return; early_console_initialized = 1; register_console(&udbg_console); } diff --git a/arch/powerpc/kernel/udbg_16550.c b/arch/powerpc/kernel/udbg_16550.c index 50fd376446c9..28a58da5592c 100644 --- a/arch/powerpc/kernel/udbg_16550.c +++ b/arch/powerpc/kernel/udbg_16550.c @@ -47,7 +47,7 @@ struct NS16550 { static volatile struct NS16550 __iomem *udbg_comport; -static void udbg_550_putc(unsigned char c) +static void udbg_550_putc(char c) { if (udbg_comport) { while ((in_8(&udbg_comport->lsr) & LSR_THRE) == 0) @@ -69,7 +69,7 @@ static int udbg_550_getc_poll(void) return -1; } -static unsigned char udbg_550_getc(void) +static char udbg_550_getc(void) { if (udbg_comport) { while ((in_8(&udbg_comport->lsr) & LSR_DR) == 0) diff --git a/arch/powerpc/mm/init_32.c b/arch/powerpc/mm/init_32.c index 7d4b8b5f0606..7d0d75c11848 100644 --- a/arch/powerpc/mm/init_32.c +++ b/arch/powerpc/mm/init_32.c @@ -188,6 +188,11 @@ void __init MMU_init(void) if (ppc_md.progress) ppc_md.progress("MMU:exit", 0x211); + + /* From now on, btext is no longer BAT mapped if it was at all */ +#ifdef CONFIG_BOOTX_TEXT + btext_unmap(); +#endif } /* This is only called until mem_init is done. */ diff --git a/arch/powerpc/platforms/powermac/Makefile b/arch/powerpc/platforms/powermac/Makefile index c9df44fcf571..3e5370eeb1b7 100644 --- a/arch/powerpc/platforms/powermac/Makefile +++ b/arch/powerpc/platforms/powermac/Makefile @@ -7,3 +7,4 @@ obj-$(CONFIG_NVRAM) += nvram.o # ppc64 pmac doesn't define CONFIG_NVRAM but needs nvram stuff obj-$(CONFIG_PPC64) += nvram.o obj-$(CONFIG_SMP) += smp.o +obj-$(CONFIG_PPC_MERGE) += udbg_scc.o udbg_adb.o diff --git a/arch/powerpc/platforms/powermac/feature.c b/arch/powerpc/platforms/powermac/feature.c index f6e22da2a5da..52a9d0c1b8b8 100644 --- a/arch/powerpc/platforms/powermac/feature.c +++ b/arch/powerpc/platforms/powermac/feature.c @@ -2607,6 +2607,8 @@ found: */ static void __init probe_uninorth(void) { + u32 *addrp; + phys_addr_t address; unsigned long actrl; /* Locate core99 Uni-N */ @@ -2616,20 +2618,23 @@ static void __init probe_uninorth(void) uninorth_node = of_find_node_by_name(NULL, "u3"); uninorth_u3 = 1; } - if (uninorth_node && uninorth_node->n_addrs > 0) { - unsigned long address = uninorth_node->addrs[0].address; - uninorth_base = ioremap(address, 0x40000); - uninorth_rev = in_be32(UN_REG(UNI_N_VERSION)); - if (uninorth_u3) - u3_ht = ioremap(address + U3_HT_CONFIG_BASE, 0x1000); - } else - uninorth_node = NULL; - - if (!uninorth_node) + if (uninorth_node == NULL) return; - printk(KERN_INFO "Found %s memory controller & host bridge, revision: %d\n", - uninorth_u3 ? "U3" : "UniNorth", uninorth_rev); + addrp = (u32 *)get_property(uninorth_node, "reg", NULL); + if (addrp == NULL) + return; + address = of_translate_address(uninorth_node, addrp); + if (address == 0) + return; + uninorth_base = ioremap(address, 0x40000); + uninorth_rev = in_be32(UN_REG(UNI_N_VERSION)); + if (uninorth_u3) + u3_ht = ioremap(address + U3_HT_CONFIG_BASE, 0x1000); + + printk(KERN_INFO "Found %s memory controller & host bridge," + " revision: %d\n", uninorth_u3 ? "U3" : "UniNorth", + uninorth_rev); printk(KERN_INFO "Mapped at 0x%08lx\n", (unsigned long)uninorth_base); /* Set the arbitrer QAck delay according to what Apple does @@ -2653,18 +2658,17 @@ static void __init probe_one_macio(const char *name, const char *compat, int typ { struct device_node* node; int i; - volatile u32 __iomem * base; - u32* revp; + volatile u32 __iomem *base; + u32 *addrp, *revp; + phys_addr_t addr; + u64 size; - node = find_devices(name); - if (!node || !node->n_addrs) - return; - if (compat) - do { - if (device_is_compatible(node, compat)) - break; - node = node->next; - } while (node); + for (node = NULL; (node = of_find_node_by_name(node, name)) != NULL;) { + if (!compat) + break; + if (device_is_compatible(node, compat)) + break; + } if (!node) return; for(i=0; i<MAX_MACIO_CHIPS; i++) { @@ -2673,14 +2677,28 @@ static void __init probe_one_macio(const char *name, const char *compat, int typ if (macio_chips[i].of_node == node) return; } + if (i >= MAX_MACIO_CHIPS) { printk(KERN_ERR "pmac_feature: Please increase MAX_MACIO_CHIPS !\n"); printk(KERN_ERR "pmac_feature: %s skipped\n", node->full_name); return; } - base = ioremap(node->addrs[0].address, node->addrs[0].size); + addrp = of_get_pci_address(node, 0, &size); + if (addrp == NULL) { + printk(KERN_ERR "pmac_feature: %s: can't find base !\n", + node->full_name); + return; + } + addr = of_translate_address(node, addrp); + if (addr == 0) { + printk(KERN_ERR "pmac_feature: %s, can't translate base !\n", + node->full_name); + return; + } + base = ioremap(addr, (unsigned long)size); if (!base) { - printk(KERN_ERR "pmac_feature: Can't map mac-io chip !\n"); + printk(KERN_ERR "pmac_feature: %s, can't map mac-io chip !\n", + node->full_name); return; } if (type == macio_keylargo) { diff --git a/arch/powerpc/platforms/powermac/low_i2c.c b/arch/powerpc/platforms/powermac/low_i2c.c index f3f39e8e337a..606e0ed13731 100644 --- a/arch/powerpc/platforms/powermac/low_i2c.c +++ b/arch/powerpc/platforms/powermac/low_i2c.c @@ -36,7 +36,7 @@ #ifdef DEBUG #define DBG(x...) do {\ - printk(KERN_DEBUG "KW:" x); \ + printk(KERN_DEBUG "low_i2c:" x); \ } while(0) #else #define DBG(x...) @@ -342,7 +342,7 @@ static int keywest_low_i2c_func(struct low_i2c_host *host, u8 addr, u8 subaddr, static void keywest_low_i2c_add(struct device_node *np) { struct low_i2c_host *host = find_low_i2c_host(NULL); - u32 *psteps, *prate, steps, aoffset = 0; + u32 *psteps, *prate, *addrp, steps; struct device_node *parent; if (host == NULL) { @@ -352,6 +352,16 @@ static void keywest_low_i2c_add(struct device_node *np) } memset(host, 0, sizeof(*host)); + /* Apple is kind enough to provide a valid AAPL,address property + * on all i2c keywest nodes so far ... we would have to fallback + * to macio parsing if that wasn't the case + */ + addrp = (u32 *)get_property(np, "AAPL,address", NULL); + if (addrp == NULL) { + printk(KERN_ERR "low_i2c: Can't find address for %s\n", + np->full_name); + return; + } init_MUTEX(&host->mutex); host->np = of_node_get(np); psteps = (u32 *)get_property(np, "AAPL,address-step", NULL); @@ -360,12 +370,10 @@ static void keywest_low_i2c_add(struct device_node *np) steps >>= 1; parent = of_get_parent(np); host->num_channels = 1; - if (parent && parent->name[0] == 'u') { + if (parent && parent->name[0] == 'u') host->num_channels = 2; - aoffset = 3; - } /* Select interface rate */ - host->speed = KW_I2C_MODE_100KHZ; + host->speed = KW_I2C_MODE_25KHZ; prate = (u32 *)get_property(np, "AAPL,i2c-rate", NULL); if (prate) switch(*prate) { case 100: @@ -379,9 +387,12 @@ static void keywest_low_i2c_add(struct device_node *np) break; } + printk(KERN_INFO "low_i2c: Bus %s found at 0x%08x, %d channels," + " speed = %d KHz\n", + np->full_name, *addrp, host->num_channels, prate ? *prate : 25); + host->mode = pmac_low_i2c_mode_std; - host->base = ioremap(np->addrs[0].address + aoffset, - np->addrs[0].size); + host->base = ioremap((*addrp), 0x1000); host->func = keywest_low_i2c_func; } diff --git a/arch/powerpc/platforms/powermac/pic.c b/arch/powerpc/platforms/powermac/pic.c index 90040c49494d..ff78eeac10f2 100644 --- a/arch/powerpc/platforms/powermac/pic.c +++ b/arch/powerpc/platforms/powermac/pic.c @@ -459,7 +459,7 @@ void __init pmac_pic_init(void) mpic_setup_cascade(irqctrler2->intrs[0].line, pmac_u3_cascade, mpic2); } -#if defined(CONFIG_XMON) && defined(CONFIG_PPC32) +#ifdef CONFIG_XMON { struct device_node* pswitch; int nmi_irq; diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c index 3b7a492d9b68..6ee620fe5195 100644 --- a/arch/powerpc/platforms/powermac/setup.c +++ b/arch/powerpc/platforms/powermac/setup.c @@ -77,6 +77,7 @@ #include <asm/pmc.h> #include <asm/mpic.h> #include <asm/lmb.h> +#include <asm/udbg.h> #include "pmac.h" @@ -322,16 +323,6 @@ void __init pmac_setup_arch(void) l2cr_init(); #endif /* CONFIG_PPC32 */ -#ifdef CONFIG_PPC64 - /* Probe motherboard chipset */ - /* this is done earlier in setup_arch for 32-bit */ - pmac_feature_init(); - - /* We can NAP */ - powersave_nap = 1; - printk(KERN_INFO "Using native/NAP idle loop\n"); -#endif - #ifdef CONFIG_KGDB zs_kgdb_hook(0); #endif @@ -622,13 +613,26 @@ static void __init pmac_init_early(void) * and call ioremap */ hpte_init_native(); +#endif - /* Init SCC */ - if (strstr(cmd_line, "sccdbg")) { - sccdbg = 1; - udbg_init_scc(NULL); + /* Enable early btext debug if requested */ + if (strstr(cmd_line, "btextdbg")) { + udbg_adb_init_early(); + register_early_udbg_console(); } + /* Probe motherboard chipset */ + pmac_feature_init(); + + /* We can NAP */ + powersave_nap = 1; + printk(KERN_INFO "Using native/NAP idle loop\n"); + + /* Initialize debug stuff */ + udbg_scc_init(!!strstr(cmd_line, "sccdbg")); + udbg_adb_init(!!strstr(cmd_line, "btextdbg")); + +#ifdef CONFIG_PPC64 /* Setup interrupt mapping options */ ppc64_interrupt_controller = IC_OPEN_PIC; @@ -638,19 +642,8 @@ static void __init pmac_init_early(void) static void __init pmac_progress(char *s, unsigned short hex) { -#ifdef CONFIG_PPC64 - if (sccdbg) { - udbg_puts(s); - udbg_puts("\n"); - return; - } -#endif -#ifdef CONFIG_BOOTX_TEXT - if (boot_text_mapped) { - btext_drawstring(s); - btext_drawchar('\n'); - } -#endif /* CONFIG_BOOTX_TEXT */ + udbg_puts(s); + udbg_puts("\n"); } /* @@ -735,7 +728,8 @@ static int __init pmac_probe(int platform) } #ifdef CONFIG_PPC64 -static int pmac_probe_mode(struct pci_bus *bus) +/* Move that to pci.c */ +static int pmac_pci_probe_mode(struct pci_bus *bus) { struct device_node *node = bus->sysdata; @@ -771,7 +765,7 @@ struct machdep_calls __initdata pmac_md = { .check_legacy_ioport = pmac_check_legacy_ioport, .progress = pmac_progress, #ifdef CONFIG_PPC64 - .pci_probe_mode = pmac_probe_mode, + .pci_probe_mode = pmac_pci_probe_mode, .idle_loop = native_idle, .enable_pmcs = power4_enable_pmcs, #ifdef CONFIG_KEXEC diff --git a/arch/powerpc/platforms/powermac/udbg_adb.c b/arch/powerpc/platforms/powermac/udbg_adb.c new file mode 100644 index 000000000000..e51de55b2d6e --- /dev/null +++ b/arch/powerpc/platforms/powermac/udbg_adb.c @@ -0,0 +1,218 @@ +#include <linux/config.h> +#include <linux/string.h> +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/bitops.h> +#include <linux/ptrace.h> +#include <linux/adb.h> +#include <linux/pmu.h> +#include <linux/cuda.h> +#include <asm/machdep.h> +#include <asm/io.h> +#include <asm/page.h> +#include <asm/xmon.h> +#include <asm/prom.h> +#include <asm/bootx.h> +#include <asm/machdep.h> +#include <asm/errno.h> +#include <asm/pmac_feature.h> +#include <asm/processor.h> +#include <asm/delay.h> +#include <asm/btext.h> +#include <asm/time.h> +#include <asm/udbg.h> + +/* + * This implementation is "special", it can "patch" the current + * udbg implementation and work on top of it. It must thus be + * initialized last + */ + +static void (*udbg_adb_old_putc)(char c); +static char (*udbg_adb_old_getc)(void); +static int (*udbg_adb_old_getc_poll)(void); + +static enum { + input_adb_none, + input_adb_pmu, + input_adb_cuda, +} input_type = input_adb_none; + +static int udbg_adb_use_btext; + +int xmon_wants_key, xmon_adb_keycode; + +static inline void udbg_adb_poll(void) +{ +#ifdef CONFIG_ADB_PMU + if (input_type == input_adb_pmu) + pmu_poll_adb(); +#endif /* CONFIG_ADB_PMU */ +#ifdef CONFIG_ADB_CUDA + if (input_type == input_adb_cuda) + cuda_poll(); +#endif /* CONFIG_ADB_CUDA */ +} + +#ifdef CONFIG_BOOTX_TEXT +static int xmon_adb_shiftstate; + +static unsigned char xmon_keytab[128] = + "asdfhgzxcv\000bqwer" /* 0x00 - 0x0f */ + "yt123465=97-80]o" /* 0x10 - 0x1f */ + "u[ip\rlj'k;\\,/nm." /* 0x20 - 0x2f */ + "\t `\177\0\033\0\0\0\0\0\0\0\0\0\0" /* 0x30 - 0x3f */ + "\0.\0*\0+\0\0\0\0\0/\r\0-\0" /* 0x40 - 0x4f */ + "\0\0000123456789\0\0\0"; /* 0x50 - 0x5f */ + +static unsigned char xmon_shift_keytab[128] = + "ASDFHGZXCV\000BQWER" /* 0x00 - 0x0f */ + "YT!@#$^%+(&_*)}O" /* 0x10 - 0x1f */ + "U{IP\rLJ\"K:|<?NM>" /* 0x20 - 0x2f */ + "\t ~\177\0\033\0\0\0\0\0\0\0\0\0\0" /* 0x30 - 0x3f */ + "\0.\0*\0+\0\0\0\0\0/\r\0-\0" /* 0x40 - 0x4f */ + "\0\0000123456789\0\0\0"; /* 0x50 - 0x5f */ + +static char udbg_adb_local_getc(void) +{ + int k, t, on; + + xmon_wants_key = 1; + for (;;) { + xmon_adb_keycode = -1; + t = 0; + on = 0; + k = -1; + do { + if (--t < 0) { + on = 1 - on; + btext_drawchar(on? 0xdb: 0x20); + btext_drawchar('\b'); + t = 200000; + } + udbg_adb_poll(); + if (udbg_adb_old_getc_poll) + k = udbg_adb_old_getc_poll(); + } while (k == -1 && xmon_adb_keycode == -1); + if (on) + btext_drawstring(" \b"); + if (k != -1) + return k; + k = xmon_adb_keycode; + + /* test for shift keys */ + if ((k & 0x7f) == 0x38 || (k & 0x7f) == 0x7b) { + xmon_adb_shiftstate = (k & 0x80) == 0; + continue; + } + if (k >= 0x80) + continue; /* ignore up transitions */ + k = (xmon_adb_shiftstate? xmon_shift_keytab: xmon_keytab)[k]; + if (k != 0) + break; + } + xmon_wants_key = 0; + return k; +} +#endif /* CONFIG_BOOTX_TEXT */ + +static char udbg_adb_getc(void) +{ +#ifdef CONFIG_BOOTX_TEXT + if (udbg_adb_use_btext && input_type != input_adb_none) + return udbg_adb_local_getc(); +#endif + if (udbg_adb_old_getc) + return udbg_adb_old_getc(); + return -1; +} + +/* getc_poll() is not really used, unless you have the xmon-over modem + * hack that doesn't quite concern us here, thus we just poll the low level + * ADB driver to prevent it from timing out and call back the original poll + * routine. + */ +static int udbg_adb_getc_poll(void) +{ + udbg_adb_poll(); + + if (udbg_adb_old_getc_poll) + return udbg_adb_old_getc_poll(); + return -1; +} + +static void udbg_adb_putc(char c) +{ +#ifdef CONFIG_BOOTX_TEXT + if (udbg_adb_use_btext) + btext_drawchar(c); +#endif + if (udbg_adb_old_putc) + return udbg_adb_old_putc(c); +} + +void udbg_adb_init_early(void) +{ +#ifdef CONFIG_BOOTX_TEXT + if (btext_find_display(1) == 0) { + udbg_adb_use_btext = 1; + udbg_putc = udbg_adb_putc; + } +#endif +} + +int udbg_adb_init(int force_btext) +{ + struct device_node *np; + + /* Capture existing callbacks */ + udbg_adb_old_putc = udbg_putc; + udbg_adb_old_getc = udbg_getc; + udbg_adb_old_getc_poll = udbg_getc_poll; + + /* Check if our early init was already called */ + if (udbg_adb_old_putc == udbg_adb_putc || + udbg_adb_old_putc == btext_drawchar) + udbg_adb_old_putc = NULL; + + /* Set ours as output */ + udbg_putc = udbg_adb_putc; + udbg_getc = udbg_adb_getc; + udbg_getc_poll = udbg_adb_getc_poll; + +#ifdef CONFIG_BOOTX_TEXT + /* Check if we should use btext output */ + if (btext_find_display(force_btext) == 0) + udbg_adb_use_btext = 1; +#endif + + /* See if there is a keyboard in the device tree with a parent + * of type "adb". If not, we return a failure, but we keep the + * bext output set for now + */ + for (np = NULL; (np = of_find_node_by_name(np, "keyboard")) != NULL;) { + struct device_node *parent = of_get_parent(np); + int found = (parent && !strcmp(parent->type, "adb") == 0); + of_node_put(parent); + if (found) + break; + } + if (np == NULL) + return -ENODEV; + of_node_put(np); + +#ifdef CONFIG_ADB_PMU + if (find_via_pmu()) + input_type = input_adb_pmu; +#endif +#ifdef CONFIG_ADB_CUDA + if (find_via_cuda()) + input_type = input_adb_cuda; +#endif + + /* Same as above: nothing found, keep btext set for output */ + if (input_type == input_adb_none) + return -ENODEV; + + return 0; +} diff --git a/arch/powerpc/kernel/udbg_scc.c b/arch/powerpc/platforms/powermac/udbg_scc.c index 820c53551507..df6dec49c4c7 100644 --- a/arch/powerpc/kernel/udbg_scc.c +++ b/arch/powerpc/platforms/powermac/udbg_scc.c @@ -25,7 +25,7 @@ extern void real_writeb(u8 data, volatile u8 __iomem *addr); static volatile u8 __iomem *sccc; static volatile u8 __iomem *sccd; -static void udbg_scc_putc(unsigned char c) +static void udbg_scc_putc(char c) { if (sccc) { while ((in_8(sccc) & SCC_TXRDY) == 0) @@ -47,7 +47,7 @@ static int udbg_scc_getc_poll(void) return -1; } -static unsigned char udbg_scc_getc(void) +static char udbg_scc_getc(void) { if (sccc) { while ((in_8(sccc) & SCC_RXRDY) == 0) @@ -67,38 +67,59 @@ static unsigned char scc_inittab[] = { 3, 0xc1, /* rx enable, 8 bits */ }; -void udbg_init_scc(struct device_node *np) +void udbg_scc_init(int force_scc) { u32 *reg; unsigned long addr; + struct device_node *stdout = NULL, *escc = NULL, *macio = NULL; + struct device_node *ch, *ch_def = NULL, *ch_a = NULL; + char *path; int i, x; - if (np == NULL) - np = of_find_node_by_name(NULL, "escc"); - if (np == NULL || np->parent == NULL) - return; + escc = of_find_node_by_name(NULL, "escc"); + if (escc == NULL) + goto bail; + macio = of_get_parent(escc); + if (macio == NULL) + goto bail; + path = (char *)get_property(of_chosen, "linux,stdout-path", NULL); + if (path != NULL) + stdout = of_find_node_by_path(path); + for (ch = NULL; (ch = of_get_next_child(escc, ch)) != NULL;) { + if (ch == stdout) + ch_def = of_node_get(ch); + if (strcmp(ch->name, "ch-a") == 0) + ch_a = of_node_get(ch); + } + if (ch_def == NULL && !force_scc) + goto bail; + + ch = ch_def ? ch_def : ch_a; - udbg_printf("found SCC...\n"); /* Get address within mac-io ASIC */ - reg = (u32 *)get_property(np, "reg", NULL); + reg = (u32 *)get_property(escc, "reg", NULL); if (reg == NULL) - return; + goto bail; addr = reg[0]; - udbg_printf("local addr: %lx\n", addr); + /* Get address of mac-io PCI itself */ - reg = (u32 *)get_property(np->parent, "assigned-addresses", NULL); + reg = (u32 *)get_property(macio, "assigned-addresses", NULL); if (reg == NULL) - return; + goto bail; addr += reg[2]; - udbg_printf("final addr: %lx\n", addr); + + /* Lock the serial port */ + pmac_call_feature(PMAC_FTR_SCC_ENABLE, ch, + PMAC_SCC_ASYNC | PMAC_SCC_FLAG_XMON, 1); + /* Setup for 57600 8N1 */ - addr += 0x20; + if (ch == ch_a) + addr += 0x20; sccc = (volatile u8 * __iomem) ioremap(addr & PAGE_MASK, PAGE_SIZE) ; sccc += addr & ~PAGE_MASK; sccd = sccc + 0x10; - udbg_printf("ioremap result sccc: %p\n", sccc); mb(); for (i = 20000; i != 0; --i) @@ -113,9 +134,17 @@ void udbg_init_scc(struct device_node *np) udbg_getc_poll = udbg_scc_getc_poll; udbg_puts("Hello World !\n"); + + bail: + of_node_put(macio); + of_node_put(escc); + of_node_put(stdout); + of_node_put(ch_def); + of_node_put(ch_a); } -static void udbg_real_scc_putc(unsigned char c) +#ifdef CONFIG_PPC64 +static void udbg_real_scc_putc(char c) { while ((real_readb(sccc) & SCC_TXRDY) == 0) ; @@ -133,3 +162,4 @@ void udbg_init_pmac_realmode(void) udbg_getc = NULL; udbg_getc_poll = NULL; } +#endif /* CONFIG_PPC64 */ diff --git a/arch/powerpc/platforms/pseries/lpar.c b/arch/powerpc/platforms/pseries/lpar.c index cc0939d4cad1..615ffb961059 100644 --- a/arch/powerpc/platforms/pseries/lpar.c +++ b/arch/powerpc/platforms/pseries/lpar.c @@ -61,7 +61,7 @@ extern void pSeries_find_serial_port(void); int vtermno; /* virtual terminal# for udbg */ #define __ALIGNED__ __attribute__((__aligned__(sizeof(long)))) -static void udbg_hvsi_putc(unsigned char c) +static void udbg_hvsi_putc(char c) { /* packet's seqno isn't used anyways */ uint8_t packet[] __ALIGNED__ = { 0xff, 5, 0, 0, c }; @@ -112,7 +112,7 @@ static int udbg_hvsi_getc_poll(void) return ch; } -static unsigned char udbg_hvsi_getc(void) +static char udbg_hvsi_getc(void) { int ch; for (;;) { @@ -128,7 +128,7 @@ static unsigned char udbg_hvsi_getc(void) } } -static void udbg_putcLP(unsigned char c) +static void udbg_putcLP(char c) { char buf[16]; unsigned long rc; @@ -173,7 +173,7 @@ static int udbg_getc_pollLP(void) return ch; } -static unsigned char udbg_getcLP(void) +static char udbg_getcLP(void) { int ch; for (;;) { diff --git a/arch/powerpc/xmon/Makefile b/arch/powerpc/xmon/Makefile index b20312e5ed27..109d874ecfbe 100644 --- a/arch/powerpc/xmon/Makefile +++ b/arch/powerpc/xmon/Makefile @@ -3,9 +3,5 @@ ifdef CONFIG_PPC64 EXTRA_CFLAGS += -mno-minimal-toc endif - -obj-$(CONFIG_8xx) += start_8xx.o -obj-$(CONFIG_6xx) += start_32.o -obj-$(CONFIG_4xx) += start_32.o -obj-$(CONFIG_PPC64) += start_64.o -obj-y += xmon.o ppc-dis.o ppc-opc.o setjmp.o nonstdio.o +obj-y += xmon.o ppc-dis.o ppc-opc.o setjmp.o start.o \ + nonstdio.o diff --git a/arch/powerpc/xmon/start_64.c b/arch/powerpc/xmon/start.c index 712552c4f242..712552c4f242 100644 --- a/arch/powerpc/xmon/start_64.c +++ b/arch/powerpc/xmon/start.c diff --git a/arch/powerpc/xmon/start_32.c b/arch/powerpc/xmon/start_32.c deleted file mode 100644 index c2464df4217e..000000000000 --- a/arch/powerpc/xmon/start_32.c +++ /dev/null @@ -1,441 +0,0 @@ -/* - * Copyright (C) 1996 Paul Mackerras. - */ -#include <linux/config.h> -#include <linux/string.h> -#include <asm/machdep.h> -#include <asm/io.h> -#include <asm/page.h> -#include <linux/adb.h> -#include <linux/pmu.h> -#include <linux/cuda.h> -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/bitops.h> -#include <asm/xmon.h> -#include <asm/prom.h> -#include <asm/bootx.h> -#include <asm/machdep.h> -#include <asm/errno.h> -#include <asm/pmac_feature.h> -#include <asm/processor.h> -#include <asm/delay.h> -#include <asm/btext.h> -#include <asm/time.h> -#include "nonstdio.h" - -static volatile unsigned char __iomem *sccc, *sccd; -unsigned int TXRDY, RXRDY, DLAB; - -static int use_serial; -static int use_screen; -static int via_modem; -static int xmon_use_sccb; -static struct device_node *channel_node; - -void buf_access(void) -{ - if (DLAB) - sccd[3] &= ~DLAB; /* reset DLAB */ -} - -extern int adb_init(void); - -#ifdef CONFIG_PPC_CHRP -/* - * This looks in the "ranges" property for the primary PCI host bridge - * to find the physical address of the start of PCI/ISA I/O space. - * It is basically a cut-down version of pci_process_bridge_OF_ranges. - */ -static unsigned long chrp_find_phys_io_base(void) -{ - struct device_node *node; - unsigned int *ranges; - unsigned long base = CHRP_ISA_IO_BASE; - int rlen = 0; - int np; - - node = find_devices("isa"); - if (node != NULL) { - node = node->parent; - if (node == NULL || node->type == NULL - || strcmp(node->type, "pci") != 0) - node = NULL; - } - if (node == NULL) - node = find_devices("pci"); - if (node == NULL) - return base; - - ranges = (unsigned int *) get_property(node, "ranges", &rlen); - np = prom_n_addr_cells(node) + 5; - while ((rlen -= np * sizeof(unsigned int)) >= 0) { - if ((ranges[0] >> 24) == 1 && ranges[2] == 0) { - /* I/O space starting at 0, grab the phys base */ - base = ranges[np - 3]; - break; - } - ranges += np; - } - return base; -} -#endif /* CONFIG_PPC_CHRP */ - -void xmon_map_scc(void) -{ -#ifdef CONFIG_PPC_MULTIPLATFORM - volatile unsigned char __iomem *base; - - if (_machine == _MACH_Pmac) { - struct device_node *np; - unsigned long addr; -#ifdef CONFIG_BOOTX_TEXT - if (!use_screen && !use_serial - && !machine_is_compatible("iMac")) { - /* see if there is a keyboard in the device tree - with a parent of type "adb" */ - for (np = find_devices("keyboard"); np; np = np->next) - if (np->parent && np->parent->type - && strcmp(np->parent->type, "adb") == 0) - break; - - /* needs to be hacked if xmon_printk is to be used - from within find_via_pmu() */ -#ifdef CONFIG_ADB_PMU - if (np != NULL && boot_text_mapped && find_via_pmu()) - use_screen = 1; -#endif -#ifdef CONFIG_ADB_CUDA - if (np != NULL && boot_text_mapped && find_via_cuda()) - use_screen = 1; -#endif - } - if (!use_screen && (np = find_devices("escc")) != NULL) { - /* - * look for the device node for the serial port - * we're using and see if it says it has a modem - */ - char *name = xmon_use_sccb? "ch-b": "ch-a"; - char *slots; - int l; - - np = np->child; - while (np != NULL && strcmp(np->name, name) != 0) - np = np->sibling; - if (np != NULL) { - /* XXX should parse this properly */ - channel_node = np; - slots = get_property(np, "slot-names", &l); - if (slots != NULL && l >= 10 - && strcmp(slots+4, "Modem") == 0) - via_modem = 1; - } - } - btext_drawstring("xmon uses "); - if (use_screen) - btext_drawstring("screen and keyboard\n"); - else { - if (via_modem) - btext_drawstring("modem on "); - btext_drawstring(xmon_use_sccb? "printer": "modem"); - btext_drawstring(" port\n"); - } - -#endif /* CONFIG_BOOTX_TEXT */ - -#ifdef CHRP_ESCC - addr = 0xc1013020; -#else - addr = 0xf3013020; -#endif - TXRDY = 4; - RXRDY = 1; - - np = find_devices("mac-io"); - if (np && np->n_addrs) - addr = np->addrs[0].address + 0x13020; - base = (volatile unsigned char *) ioremap(addr & PAGE_MASK, PAGE_SIZE); - sccc = base + (addr & ~PAGE_MASK); - sccd = sccc + 0x10; - - } else { - base = (volatile unsigned char *) isa_io_base; - -#ifdef CONFIG_PPC_CHRP - if (_machine == _MACH_chrp) - base = (volatile unsigned char __iomem *) - ioremap(chrp_find_phys_io_base(), 0x1000); -#endif - - sccc = base + 0x3fd; - sccd = base + 0x3f8; - if (xmon_use_sccb) { - sccc -= 0x100; - sccd -= 0x100; - } - TXRDY = 0x20; - RXRDY = 1; - DLAB = 0x80; - } -#elif defined(CONFIG_GEMINI) - /* should already be mapped by the kernel boot */ - sccc = (volatile unsigned char __iomem *) 0xffeffb0d; - sccd = (volatile unsigned char __iomem *) 0xffeffb08; - TXRDY = 0x20; - RXRDY = 1; - DLAB = 0x80; -#elif defined(CONFIG_405GP) - sccc = (volatile unsigned char __iomem *)0xef600305; - sccd = (volatile unsigned char __iomem *)0xef600300; - TXRDY = 0x20; - RXRDY = 1; - DLAB = 0x80; -#endif /* platform */ -} - -static int scc_initialized = 0; - -void xmon_init_scc(void); -extern void cuda_poll(void); - -static inline void do_poll_adb(void) -{ -#ifdef CONFIG_ADB_PMU - if (sys_ctrler == SYS_CTRLER_PMU) - pmu_poll_adb(); -#endif /* CONFIG_ADB_PMU */ -#ifdef CONFIG_ADB_CUDA - if (sys_ctrler == SYS_CTRLER_CUDA) - cuda_poll(); -#endif /* CONFIG_ADB_CUDA */ -} - -int xmon_write(void *ptr, int nb) -{ - char *p = ptr; - int i, c, ct; - -#ifdef CONFIG_SMP - static unsigned long xmon_write_lock; - int lock_wait = 1000000; - int locked; - - while ((locked = test_and_set_bit(0, &xmon_write_lock)) != 0) - if (--lock_wait == 0) - break; -#endif - -#ifdef CONFIG_BOOTX_TEXT - if (use_screen) { - /* write it on the screen */ - for (i = 0; i < nb; ++i) - btext_drawchar(*p++); - goto out; - } -#endif - if (!scc_initialized) - xmon_init_scc(); - ct = 0; - for (i = 0; i < nb; ++i) { - while ((*sccc & TXRDY) == 0) - do_poll_adb(); - c = p[i]; - if (c == '\n' && !ct) { - c = '\r'; - ct = 1; - --i; - } else { - ct = 0; - } - buf_access(); - *sccd = c; - eieio(); - } - - out: -#ifdef CONFIG_SMP - if (!locked) - clear_bit(0, &xmon_write_lock); -#endif - return nb; -} - -int xmon_wants_key; -int xmon_adb_keycode; - -#ifdef CONFIG_BOOTX_TEXT -static int xmon_adb_shiftstate; - -static unsigned char xmon_keytab[128] = - "asdfhgzxcv\000bqwer" /* 0x00 - 0x0f */ - "yt123465=97-80]o" /* 0x10 - 0x1f */ - "u[ip\rlj'k;\\,/nm." /* 0x20 - 0x2f */ - "\t `\177\0\033\0\0\0\0\0\0\0\0\0\0" /* 0x30 - 0x3f */ - "\0.\0*\0+\0\0\0\0\0/\r\0-\0" /* 0x40 - 0x4f */ - "\0\0000123456789\0\0\0"; /* 0x50 - 0x5f */ - -static unsigned char xmon_shift_keytab[128] = - "ASDFHGZXCV\000BQWER" /* 0x00 - 0x0f */ - "YT!@#$^%+(&_*)}O" /* 0x10 - 0x1f */ - "U{IP\rLJ\"K:|<?NM>" /* 0x20 - 0x2f */ - "\t ~\177\0\033\0\0\0\0\0\0\0\0\0\0" /* 0x30 - 0x3f */ - "\0.\0*\0+\0\0\0\0\0/\r\0-\0" /* 0x40 - 0x4f */ - "\0\0000123456789\0\0\0"; /* 0x50 - 0x5f */ - -static int xmon_get_adb_key(void) -{ - int k, t, on; - - xmon_wants_key = 1; - for (;;) { - xmon_adb_keycode = -1; - t = 0; - on = 0; - do { - if (--t < 0) { - on = 1 - on; - btext_drawchar(on? 0xdb: 0x20); - btext_drawchar('\b'); - t = 200000; - } - do_poll_adb(); - } while (xmon_adb_keycode == -1); - k = xmon_adb_keycode; - if (on) - btext_drawstring(" \b"); - - /* test for shift keys */ - if ((k & 0x7f) == 0x38 || (k & 0x7f) == 0x7b) { - xmon_adb_shiftstate = (k & 0x80) == 0; - continue; - } - if (k >= 0x80) - continue; /* ignore up transitions */ - k = (xmon_adb_shiftstate? xmon_shift_keytab: xmon_keytab)[k]; - if (k != 0) - break; - } - xmon_wants_key = 0; - return k; -} -#endif /* CONFIG_BOOTX_TEXT */ - -int xmon_readchar(void) -{ -#ifdef CONFIG_BOOTX_TEXT - if (use_screen) - return xmon_get_adb_key(); -#endif - if (!scc_initialized) - xmon_init_scc(); - while ((*sccc & RXRDY) == 0) - do_poll_adb(); - buf_access(); - return *sccd; -} - -int xmon_read_poll(void) -{ - if ((*sccc & RXRDY) == 0) { - do_poll_adb(); - return -1; - } - buf_access(); - return *sccd; -} - -static unsigned char scc_inittab[] = { - 13, 0, /* set baud rate divisor */ - 12, 1, - 14, 1, /* baud rate gen enable, src=rtxc */ - 11, 0x50, /* clocks = br gen */ - 5, 0xea, /* tx 8 bits, assert DTR & RTS */ - 4, 0x46, /* x16 clock, 1 stop */ - 3, 0xc1, /* rx enable, 8 bits */ -}; - -void xmon_init_scc(void) -{ - if ( _machine == _MACH_chrp ) - { - sccd[3] = 0x83; eieio(); /* LCR = 8N1 + DLAB */ - sccd[0] = 12; eieio(); /* DLL = 9600 baud */ - sccd[1] = 0; eieio(); - sccd[2] = 0; eieio(); /* FCR = 0 */ - sccd[3] = 3; eieio(); /* LCR = 8N1 */ - sccd[1] = 0; eieio(); /* IER = 0 */ - } - else if ( _machine == _MACH_Pmac ) - { - int i, x; - unsigned long timeout; - - if (channel_node != 0) - pmac_call_feature( - PMAC_FTR_SCC_ENABLE, - channel_node, - PMAC_SCC_ASYNC | PMAC_SCC_FLAG_XMON, 1); - printk(KERN_INFO "Serial port locked ON by debugger !\n"); - if (via_modem && channel_node != 0) { - unsigned int t0; - - pmac_call_feature( - PMAC_FTR_MODEM_ENABLE, - channel_node, 0, 1); - printk(KERN_INFO "Modem powered up by debugger !\n"); - t0 = get_tbl(); - timeout = 3 * tb_ticks_per_sec; - if (timeout == 0) - /* assume 25MHz if tb_ticks_per_sec not set */ - timeout = 75000000; - while (get_tbl() - t0 < timeout) - eieio(); - } - /* use the B channel if requested */ - if (xmon_use_sccb) { - sccc = (volatile unsigned char *) - ((unsigned long)sccc & ~0x20); - sccd = sccc + 0x10; - } - for (i = 20000; i != 0; --i) { - x = *sccc; eieio(); - } - *sccc = 9; eieio(); /* reset A or B side */ - *sccc = ((unsigned long)sccc & 0x20)? 0x80: 0x40; eieio(); - for (i = 0; i < sizeof(scc_inittab); ++i) { - *sccc = scc_inittab[i]; - eieio(); - } - } - scc_initialized = 1; - if (via_modem) { - for (;;) { - xmon_write("ATE1V1\r", 7); - if (xmon_expect("OK", 5)) { - xmon_write("ATA\r", 4); - if (xmon_expect("CONNECT", 40)) - break; - } - xmon_write("+++", 3); - xmon_expect("OK", 3); - } - } -} - -void xmon_enter(void) -{ -#ifdef CONFIG_ADB_PMU - if (_machine == _MACH_Pmac) { - pmu_suspend(); - } -#endif -} - -void xmon_leave(void) -{ -#ifdef CONFIG_ADB_PMU - if (_machine == _MACH_Pmac) { - pmu_resume(); - } -#endif -} diff --git a/arch/powerpc/xmon/start_8xx.c b/arch/powerpc/xmon/start_8xx.c deleted file mode 100644 index 4c17b0486ad5..000000000000 --- a/arch/powerpc/xmon/start_8xx.c +++ /dev/null @@ -1,44 +0,0 @@ -/* - * Copyright (C) 1996 Paul Mackerras. - * Copyright (C) 2000 Dan Malek. - * Quick hack of Paul's code to make XMON work on 8xx processors. Lots - * of assumptions, like the SMC1 is used, it has been initialized by the - * loader at some point, and we can just stuff and suck bytes. - * We rely upon the 8xx uart driver to support us, as the interface - * changes between boot up and operational phases of the kernel. - */ -#include <linux/string.h> -#include <asm/machdep.h> -#include <asm/io.h> -#include <asm/page.h> -#include <linux/kernel.h> -#include <asm/8xx_immap.h> -#include <asm/mpc8xx.h> -#include <asm/commproc.h> -#include "nonstdio.h" - -extern int xmon_8xx_write(char *str, int nb); -extern int xmon_8xx_read_poll(void); -extern int xmon_8xx_read_char(void); - -void xmon_map_scc(void) -{ - cpmp = (cpm8xx_t *)&(((immap_t *)IMAP_ADDR)->im_cpm); -} - -void xmon_init_scc(void); - -int xmon_write(void *ptr, int nb) -{ - return(xmon_8xx_write(ptr, nb)); -} - -int xmon_readchar(void) -{ - return xmon_8xx_read_char(); -} - -int xmon_read_poll(void) -{ - return(xmon_8xx_read_poll()); -} |
