diff options
Diffstat (limited to 'arch/powerpc')
77 files changed, 7001 insertions, 975 deletions
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 74cc312c347c..ccdd8de3c558 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -594,6 +594,7 @@ config FSL_SOC config FSL_PCI bool select PPC_INDIRECT_PCI + select PCI_QUIRKS config 4xx_SOC bool @@ -730,6 +731,22 @@ config LOWMEM_SIZE hex "Maximum low memory size (in bytes)" if LOWMEM_SIZE_BOOL default "0x30000000" +config LOWMEM_CAM_NUM_BOOL + bool "Set number of CAMs to use to map low memory" + depends on ADVANCED_OPTIONS && FSL_BOOKE + help + This option allows you to set the maximum number of CAM slots that + will be used to map low memory. There are a limited number of slots + available and even more limited number that will fit in the L1 MMU. + However, using more entries will allow mapping more low memory. This + can be useful in optimizing the layout of kernel virtual memory. + + Say N here unless you know what you are doing. + +config LOWMEM_CAM_NUM + int "Number of CAMs to use to map low memory" if LOWMEM_CAM_NUM_BOOL + default 3 + config RELOCATABLE bool "Build a relocatable kernel (EXPERIMENTAL)" depends on EXPERIMENTAL && ADVANCED_OPTIONS && FLATMEM && FSL_BOOKE @@ -794,7 +811,7 @@ config PHYSICAL_START config PHYSICAL_ALIGN hex - default "0x10000000" if FSL_BOOKE + default "0x04000000" if FSL_BOOKE help This value puts the alignment restrictions on physical address where kernel is loaded and run from. Kernel is compiled for an diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile index e84df338ea29..4458abb67c51 100644 --- a/arch/powerpc/boot/Makefile +++ b/arch/powerpc/boot/Makefile @@ -70,7 +70,7 @@ src-plat := of.c cuboot-52xx.c cuboot-824x.c cuboot-83xx.c cuboot-85xx.c holly.c cuboot-katmai.c cuboot-rainier.c redboot-8xx.c ep8248e.c \ cuboot-warp.c cuboot-85xx-cpm2.c cuboot-yosemite.c simpleboot.c \ virtex405-head.S virtex.c redboot-83xx.c cuboot-sam440ep.c \ - cuboot-acadia.c + cuboot-acadia.c cuboot-amigaone.c src-boot := $(src-wlib) $(src-plat) empty.c src-boot := $(addprefix $(obj)/, $(src-boot)) @@ -235,7 +235,9 @@ image-$(CONFIG_PPC_ADDER875) += cuImage.adder875-uboot \ dtbImage.adder875-redboot # Board ports in arch/powerpc/platform/52xx/Kconfig -image-$(CONFIG_PPC_LITE5200) += cuImage.lite5200 cuImage.lite5200b +image-$(CONFIG_PPC_LITE5200) += cuImage.lite5200 lite5200.dtb +image-$(CONFIG_PPC_LITE5200) += cuImage.lite5200b lite5200b.dtb +image-$(CONFIG_PPC_MEDIA5200) += cuImage.media5200 media5200.dtb # Board ports in arch/powerpc/platform/82xx/Kconfig image-$(CONFIG_MPC8272_ADS) += cuImage.mpc8272ads @@ -274,6 +276,9 @@ image-$(CONFIG_STORCENTER) += cuImage.storcenter image-$(CONFIG_MPC7448HPC2) += cuImage.mpc7448hpc2 image-$(CONFIG_PPC_C2K) += cuImage.c2k +# Board port in arch/powerpc/platform/amigaone/Kconfig +image-$(CONFIG_AMIGAONE) += cuImage.amigaone + # For 32-bit powermacs, build the COFF and miboot images # as well as the ELF images. ifeq ($(CONFIG_PPC32),y) diff --git a/arch/powerpc/boot/cuboot-amigaone.c b/arch/powerpc/boot/cuboot-amigaone.c new file mode 100644 index 000000000000..d5029674030b --- /dev/null +++ b/arch/powerpc/boot/cuboot-amigaone.c @@ -0,0 +1,35 @@ +/* + * Old U-boot compatibility for AmigaOne + * + * Author: Gerhard Pircher (gerhard_pircher@gmx.net) + * + * Based on cuboot-83xx.c + * Copyright (c) 2007 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include "ops.h" +#include "stdio.h" +#include "cuboot.h" + +#include "ppcboot.h" + +static bd_t bd; + +static void platform_fixups(void) +{ + dt_fixup_memory(bd.bi_memstart, bd.bi_memsize); + dt_fixup_cpu_clocks(bd.bi_intfreq, bd.bi_busfreq / 4, bd.bi_busfreq); +} + +void platform_init(unsigned long r3, unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7) +{ + CUBOOT_INIT(); + fdt_init(_dtb_start); + serial_console_init(); + platform_ops.fixups = platform_fixups; +} diff --git a/arch/powerpc/boot/dts/amigaone.dts b/arch/powerpc/boot/dts/amigaone.dts new file mode 100644 index 000000000000..26549fca2ed4 --- /dev/null +++ b/arch/powerpc/boot/dts/amigaone.dts @@ -0,0 +1,173 @@ +/* + * AmigaOne Device Tree Source + * + * Copyright 2008 Gerhard Pircher (gerhard_pircher@gmx.net) + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/ { + model = "AmigaOne"; + compatible = "eyetech,amigaone"; + coherency-off; + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #cpus = <1>; + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <32>; // 32 bytes + i-cache-line-size = <32>; // 32 bytes + d-cache-size = <32768>; // L1, 32K + i-cache-size = <32768>; // L1, 32K + timebase-frequency = <0>; // 33.3 MHz, from U-boot + clock-frequency = <0>; // From U-boot + bus-frequency = <0>; // From U-boot + }; + }; + + memory { + device_type = "memory"; + reg = <0 0>; // From U-boot + }; + + pci@80000000 { + device_type = "pci"; + compatible = "mai-logic,articia-s"; + bus-frequency = <33333333>; + bus-range = <0 0xff>; + ranges = <0x01000000 0 0x00000000 0xfe000000 0 0x00c00000 // PCI I/O + 0x02000000 0 0x80000000 0x80000000 0 0x7d000000 // PCI memory + 0x02000000 0 0x00000000 0xfd000000 0 0x01000000>; // PCI alias memory (ISA) + // Configuration address and data register. + reg = <0xfec00cf8 4 + 0xfee00cfc 4>; + 8259-interrupt-acknowledge = <0xfef00000>; + // Do not define a interrupt-parent here, if there is no + // interrupt-map property. + #address-cells = <3>; + #size-cells = <2>; + + isa@7 { + device_type = "isa"; + compatible = "pciclass,0601"; + vendor-id = <0x00001106>; + device-id = <0x00000686>; + revision-id = <0x00000010>; + class-code = <0x00060100>; + subsystem-id = <0>; + subsystem-vendor-id = <0>; + devsel-speed = <0x00000001>; + min-grant = <0>; + max-latency = <0>; + /* First 64k for I/O at 0x0 on PCI mapped to 0x0 on ISA. */ + ranges = <0x00000001 0 0x01000000 0 0x00000000 0x00010000>; + interrupt-parent = <&i8259>; + #interrupt-cells = <2>; + #address-cells = <2>; + #size-cells = <1>; + + dma-controller@0 { + compatible = "pnpPNP,200"; + reg = <1 0x00000000 0x00000020 + 1 0x00000080 0x00000010 + 1 0x000000c0 0x00000020>; + }; + + i8259: interrupt-controller@20 { + device_type = "interrupt-controller"; + compatible = "pnpPNP,000"; + interrupt-controller; + reg = <1 0x00000020 0x00000002 + 1 0x000000a0 0x00000002 + 1 0x000004d0 0x00000002>; + reserved-interrupts = <2>; + #interrupt-cells = <2>; + }; + + timer@40 { + // Also adds pcspkr to platform devices. + compatible = "pnpPNP,100"; + reg = <1 0x00000040 0x00000020>; + }; + + 8042@60 { + device_type = "8042"; + reg = <1 0x00000060 0x00000001 + 1 0x00000064 0x00000001>; + interrupts = <1 3 12 3>; + #address-cells = <1>; + #size-cells = <0>; + + keyboard@0 { + compatible = "pnpPNP,303"; + reg = <0>; + }; + + mouse@1 { + compatible = "pnpPNP,f03"; + reg = <1>; + }; + }; + + rtc@70 { + compatible = "pnpPNP,b00"; + reg = <1 0x00000070 0x00000002>; + interrupts = <8 3>; + }; + + serial@3f8 { + device_type = "serial"; + compatible = "pnpPNP,501","pnpPNP,500"; + reg = <1 0x000003f8 0x00000008>; + interrupts = <4 3>; + clock-frequency = <1843200>; + current-speed = <115200>; + }; + + serial@2f8 { + device_type = "serial"; + compatible = "pnpPNP,501","pnpPNP,500"; + reg = <1 0x000002f8 0x00000008>; + interrupts = <3 3>; + clock-frequency = <1843200>; + current-speed = <115200>; + }; + + parallel@378 { + device_type = "parallel"; + // No ECP support for now, otherwise add "pnpPNP,401". + compatible = "pnpPNP,400"; + reg = <1 0x00000378 0x00000003 + 1 0x00000778 0x00000003>; + }; + + fdc@3f0 { + device_type = "fdc"; + compatible = "pnpPNP,700"; + reg = <1 0x000003f0 0x00000008>; + interrupts = <6 3>; + #address-cells = <1>; + #size-cells = <0>; + + disk@0 { + reg = <0>; + }; + }; + }; + }; + + chosen { + linux,stdout-path = "/pci@80000000/isa@7/serial@3f8"; + }; +}; diff --git a/arch/powerpc/boot/dts/cm5200.dts b/arch/powerpc/boot/dts/cm5200.dts index 2f74cc4e093e..cee8080aa245 100644 --- a/arch/powerpc/boot/dts/cm5200.dts +++ b/arch/powerpc/boot/dts/cm5200.dts @@ -17,6 +17,7 @@ compatible = "schindler,cm5200"; #address-cells = <1>; #size-cells = <1>; + interrupt-parent = <&mpc5200_pic>; cpus { #address-cells = <1>; @@ -66,7 +67,6 @@ compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; reg = <0x600 0x10>; interrupts = <1 9 0>; - interrupt-parent = <&mpc5200_pic>; fsl,has-wdt; }; @@ -74,84 +74,76 @@ compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; reg = <0x610 0x10>; interrupts = <1 10 0>; - interrupt-parent = <&mpc5200_pic>; }; timer@620 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; reg = <0x620 0x10>; interrupts = <1 11 0>; - interrupt-parent = <&mpc5200_pic>; }; timer@630 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; reg = <0x630 0x10>; interrupts = <1 12 0>; - interrupt-parent = <&mpc5200_pic>; }; timer@640 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; reg = <0x640 0x10>; interrupts = <1 13 0>; - interrupt-parent = <&mpc5200_pic>; }; timer@650 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; reg = <0x650 0x10>; interrupts = <1 14 0>; - interrupt-parent = <&mpc5200_pic>; }; timer@660 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; reg = <0x660 0x10>; interrupts = <1 15 0>; - interrupt-parent = <&mpc5200_pic>; }; timer@670 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; reg = <0x670 0x10>; interrupts = <1 16 0>; - interrupt-parent = <&mpc5200_pic>; }; rtc@800 { // Real time clock compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc"; reg = <0x800 0x100>; interrupts = <1 5 0 1 6 0>; - interrupt-parent = <&mpc5200_pic>; }; - gpio@b00 { + gpio_simple: gpio@b00 { compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio"; reg = <0xb00 0x40>; interrupts = <1 7 0>; - interrupt-parent = <&mpc5200_pic>; + gpio-controller; + #gpio-cells = <2>; }; - gpio@c00 { + gpio_wkup: gpio@c00 { compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup"; reg = <0xc00 0x40>; interrupts = <1 8 0 0 3 0>; - interrupt-parent = <&mpc5200_pic>; + gpio-controller; + #gpio-cells = <2>; }; spi@f00 { compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi"; reg = <0xf00 0x20>; interrupts = <2 13 0 2 14 0>; - interrupt-parent = <&mpc5200_pic>; }; usb@1000 { compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be"; reg = <0x1000 0xff>; interrupts = <2 6 0>; - interrupt-parent = <&mpc5200_pic>; }; dma-controller@1200 { @@ -161,7 +153,6 @@ 3 4 0 3 5 0 3 6 0 3 7 0 3 8 0 3 9 0 3 10 0 3 11 0 3 12 0 3 13 0 3 14 0 3 15 0>; - interrupt-parent = <&mpc5200_pic>; }; xlb@1f00 { @@ -170,48 +161,34 @@ }; serial@2000 { // PSC1 - device_type = "serial"; compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; - port-number = <0>; // Logical port assignment reg = <0x2000 0x100>; interrupts = <2 1 0>; - interrupt-parent = <&mpc5200_pic>; }; serial@2200 { // PSC2 - device_type = "serial"; - compatible = "fsl,mpc5200-psc-uart"; - port-number = <1>; // Logical port assignment + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; reg = <0x2200 0x100>; interrupts = <2 2 0>; - interrupt-parent = <&mpc5200_pic>; }; serial@2400 { // PSC3 - device_type = "serial"; - compatible = "fsl,mpc5200-psc-uart"; - port-number = <2>; // Logical port assignment + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; reg = <0x2400 0x100>; interrupts = <2 3 0>; - interrupt-parent = <&mpc5200_pic>; }; serial@2c00 { // PSC6 - device_type = "serial"; compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; - port-number = <5>; // Logical port assignment reg = <0x2c00 0x100>; interrupts = <2 4 0>; - interrupt-parent = <&mpc5200_pic>; }; ethernet@3000 { - device_type = "network"; compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec"; reg = <0x3000 0x400>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <2 5 0>; - interrupt-parent = <&mpc5200_pic>; phy-handle = <&phy0>; }; @@ -221,10 +198,8 @@ compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio"; reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co. - interrupt-parent = <&mpc5200_pic>; phy0: ethernet-phy@0 { - device_type = "ethernet-phy"; reg = <0>; }; }; @@ -235,7 +210,6 @@ compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; reg = <0x3d40 0x40>; interrupts = <2 16 0>; - interrupt-parent = <&mpc5200_pic>; fsl5200-clocking; }; @@ -245,9 +219,8 @@ }; }; - lpb { - model = "fsl,lpb"; - compatible = "fsl,lpb"; + localbus { + compatible = "fsl,mpc5200b-lpb","simple-bus"; #address-cells = <2>; #size-cells = <1>; ranges = <0 0 0xfc000000 0x2000000>; diff --git a/arch/powerpc/boot/dts/digsy_mtc.dts b/arch/powerpc/boot/dts/digsy_mtc.dts new file mode 100644 index 000000000000..0e85ebf7e4c8 --- /dev/null +++ b/arch/powerpc/boot/dts/digsy_mtc.dts @@ -0,0 +1,254 @@ +/* + * Digsy MTC board Device Tree Source + * + * Copyright (C) 2009 Semihalf + * + * Based on the CM5200 by M. Balakowicz + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/ { + model = "intercontrol,digsy-mtc"; + compatible = "intercontrol,digsy-mtc"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&mpc5200_pic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,5200@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <0x4000>; // L1, 16K + i-cache-size = <0x4000>; // L1, 16K + timebase-frequency = <0>; // from bootloader + bus-frequency = <0>; // from bootloader + clock-frequency = <0>; // from bootloader + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x02000000>; // 32MB + }; + + soc5200@f0000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc5200b-immr"; + ranges = <0 0xf0000000 0x0000c000>; + reg = <0xf0000000 0x00000100>; + bus-frequency = <0>; // from bootloader + system-frequency = <0>; // from bootloader + + cdm@200 { + compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm"; + reg = <0x200 0x38>; + }; + + mpc5200_pic: interrupt-controller@500 { + // 5200 interrupts are encoded into two levels; + interrupt-controller; + #interrupt-cells = <3>; + compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic"; + reg = <0x500 0x80>; + }; + + timer@600 { // General Purpose Timer + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + reg = <0x600 0x10>; + interrupts = <1 9 0>; + fsl,has-wdt; + }; + + timer@610 { // General Purpose Timer + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + reg = <0x610 0x10>; + interrupts = <1 10 0>; + }; + + timer@620 { // General Purpose Timer + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + reg = <0x620 0x10>; + interrupts = <1 11 0>; + }; + + timer@630 { // General Purpose Timer + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + reg = <0x630 0x10>; + interrupts = <1 12 0>; + }; + + timer@640 { // General Purpose Timer + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + reg = <0x640 0x10>; + interrupts = <1 13 0>; + }; + + timer@650 { // General Purpose Timer + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + reg = <0x650 0x10>; + interrupts = <1 14 0>; + }; + + timer@660 { // General Purpose Timer + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + reg = <0x660 0x10>; + interrupts = <1 15 0>; + }; + + timer@670 { // General Purpose Timer + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + reg = <0x670 0x10>; + interrupts = <1 16 0>; + }; + + gpio_simple: gpio@b00 { + compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio"; + reg = <0xb00 0x40>; + interrupts = <1 7 0>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpio_wkup: gpio@c00 { + compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup"; + reg = <0xc00 0x40>; + interrupts = <1 8 0 0 3 0>; + gpio-controller; + #gpio-cells = <2>; + }; + + spi@f00 { + compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi"; + reg = <0xf00 0x20>; + interrupts = <2 13 0 2 14 0>; + }; + + usb@1000 { + compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be"; + reg = <0x1000 0xff>; + interrupts = <2 6 0>; + }; + + dma-controller@1200 { + compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm"; + reg = <0x1200 0x80>; + interrupts = <3 0 0 3 1 0 3 2 0 3 3 0 + 3 4 0 3 5 0 3 6 0 3 7 0 + 3 8 0 3 9 0 3 10 0 3 11 0 + 3 12 0 3 13 0 3 14 0 3 15 0>; + }; + + xlb@1f00 { + compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb"; + reg = <0x1f00 0x100>; + }; + + serial@2400 { // PSC3 + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; + reg = <0x2400 0x100>; + interrupts = <2 3 0>; + }; + + serial@2600 { // PSC4 + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; + reg = <0x2600 0x100>; + interrupts = <2 11 0>; + }; + + ethernet@3000 { + compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec"; + reg = <0x3000 0x400>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <2 5 0>; + phy-handle = <&phy0>; + }; + + mdio@3000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio"; + reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts + interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co. + + phy0: ethernet-phy@0 { + reg = <0>; + }; + }; + + ata@3a00 { + compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata"; + reg = <0x3a00 0x100>; + interrupts = <2 7 0>; + }; + + i2c@3d00 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; + reg = <0x3d00 0x40>; + interrupts = <2 15 0>; + fsl5200-clocking; + + rtc@50 { + compatible = "at,24c08"; + reg = <0x50>; + }; + + rtc@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + }; + }; + + sram@8000 { + compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram"; + reg = <0x8000 0x4000>; + }; + }; + + lpb { + compatible = "fsl,mpc5200b-lpb","simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 0xff000000 0x1000000>; + + // 16-bit flash device at LocalPlus Bus CS0 + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x1000000>; + bank-width = <2>; + device-width = <2>; + #size-cells = <1>; + #address-cells = <1>; + + partition@0 { + label = "kernel"; + reg = <0x0 0x00200000>; + }; + partition@200000 { + label = "root"; + reg = <0x00200000 0x00300000>; + }; + partition@500000 { + label = "user"; + reg = <0x00500000 0x00a00000>; + }; + partition@f00000 { + label = "u-boot"; + reg = <0x00f00000 0x100000>; + }; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/gef_sbc310.dts b/arch/powerpc/boot/dts/gef_sbc310.dts new file mode 100644 index 000000000000..09eeb438216b --- /dev/null +++ b/arch/powerpc/boot/dts/gef_sbc310.dts @@ -0,0 +1,364 @@ +/* + * GE Fanuc SBC310 Device Tree Source + * + * Copyright 2008 GE Fanuc Intelligent Platforms Embedded Systems, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * Based on: SBS CM6 Device Tree Source + * Copyright 2007 SBS Technologies GmbH & Co. KG + * And: mpc8641_hpcn.dts (MPC8641 HPCN Device Tree Source) + * Copyright 2006 Freescale Semiconductor Inc. + */ + +/* + * Compiled with dtc -I dts -O dtb -o gef_sbc310.dtb gef_sbc310.dts + */ + +/dts-v1/; + +/ { + model = "GEF_SBC310"; + compatible = "gef,sbc310"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8641@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <32>; // 32 bytes + i-cache-line-size = <32>; // 32 bytes + d-cache-size = <32768>; // L1, 32K + i-cache-size = <32768>; // L1, 32K + timebase-frequency = <0>; // From uboot + bus-frequency = <0>; // From uboot + clock-frequency = <0>; // From uboot + }; + PowerPC,8641@1 { + device_type = "cpu"; + reg = <1>; + d-cache-line-size = <32>; // 32 bytes + i-cache-line-size = <32>; // 32 bytes + d-cache-size = <32768>; // L1, 32K + i-cache-size = <32768>; // L1, 32K + timebase-frequency = <0>; // From uboot + bus-frequency = <0>; // From uboot + clock-frequency = <0>; // From uboot + }; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x40000000>; // set by uboot + }; + + localbus@fef05000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8641-localbus", "simple-bus"; + reg = <0xfef05000 0x1000>; + interrupts = <19 2>; + interrupt-parent = <&mpic>; + + ranges = <0 0 0xff000000 0x01000000 // 16MB Boot flash + 1 0 0xe0000000 0x08000000 // Paged Flash 0 + 2 0 0xe8000000 0x08000000 // Paged Flash 1 + 3 0 0xfc100000 0x00020000 // NVRAM + 4 0 0xfc000000 0x00010000>; // FPGA + + /* flash@0,0 is a mirror of part of the memory in flash@1,0 + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x01000000>; + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "firmware"; + reg = <0x00000000 0x01000000>; + read-only; + }; + }; + */ + + flash@1,0 { + compatible = "cfi-flash"; + reg = <1 0 0x8000000>; + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "user"; + reg = <0x00000000 0x07800000>; + }; + partition@7800000 { + label = "firmware"; + reg = <0x07800000 0x00800000>; + read-only; + }; + }; + + fpga@4,0 { + compatible = "gef,fpga-regs"; + reg = <0x4 0x0 0x40>; + }; + + wdt@4,2000 { + #interrupt-cells = <2>; + device_type = "watchdog"; + compatible = "gef,fpga-wdt"; + reg = <0x4 0x2000 0x8>; + interrupts = <0x1a 0x4>; + interrupt-parent = <&gef_pic>; + }; +/* + wdt@4,2010 { + #interrupt-cells = <2>; + device_type = "watchdog"; + compatible = "gef,fpga-wdt"; + reg = <0x4 0x2010 0x8>; + interrupts = <0x1b 0x4>; + interrupt-parent = <&gef_pic>; + }; +*/ + gef_pic: pic@4,4000 { + #interrupt-cells = <1>; + interrupt-controller; + compatible = "gef,fpga-pic"; + reg = <0x4 0x4000 0x20>; + interrupts = <0x8 + 0x9>; + interrupt-parent = <&mpic>; + + }; + gef_gpio: gpio@4,8000 { + #gpio-cells = <2>; + compatible = "gef,sbc310-gpio"; + reg = <0x4 0x8000 0x24>; + gpio-controller; + }; + }; + + soc@fef00000 { + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <2>; + device_type = "soc"; + compatible = "simple-bus"; + ranges = <0x0 0xfef00000 0x00100000>; + reg = <0xfef00000 0x100000>; // CCSRBAR 1M + bus-frequency = <33333333>; + + i2c1: i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <0x2b 0x2>; + interrupt-parent = <&mpic>; + dfsrr; + + rtc@51 { + compatible = "epson,rx8581"; + reg = <0x00000051>; + }; + }; + + i2c2: i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <0x2b 0x2>; + interrupt-parent = <&mpic>; + dfsrr; + + hwmon@48 { + compatible = "national,lm92"; + reg = <0x48>; + }; + + hwmon@4c { + compatible = "adi,adt7461"; + reg = <0x4c>; + }; + + eti@6b { + compatible = "dallas,ds1682"; + reg = <0x6b>; + }; + }; + + dma@21300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8641-dma", "fsl,eloplus-dma"; + reg = <0x21300 0x4>; + ranges = <0x0 0x21100 0x200>; + cell-index = <0>; + dma-channel@0 { + compatible = "fsl,mpc8641-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + cell-index = <0>; + interrupt-parent = <&mpic>; + interrupts = <20 2>; + }; + dma-channel@80 { + compatible = "fsl,mpc8641-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + cell-index = <1>; + interrupt-parent = <&mpic>; + interrupts = <21 2>; + }; + dma-channel@100 { + compatible = "fsl,mpc8641-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + cell-index = <2>; + interrupt-parent = <&mpic>; + interrupts = <22 2>; + }; + dma-channel@180 { + compatible = "fsl,mpc8641-dma-channel", + "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + cell-index = <3>; + interrupt-parent = <&mpic>; + interrupts = <23 2>; + }; + }; + + mdio@24520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x24520 0x20>; + + phy0: ethernet-phy@0 { + interrupt-parent = <&gef_pic>; + interrupts = <0x9 0x4>; + reg = <1>; + }; + phy2: ethernet-phy@2 { + interrupt-parent = <&gef_pic>; + interrupts = <0x8 0x4>; + reg = <3>; + }; + }; + + enet0: ethernet@24000 { + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>; + interrupt-parent = <&mpic>; + phy-handle = <&phy0>; + phy-connection-type = "gmii"; + }; + + enet1: ethernet@26000 { + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x26000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <0x1f 0x2 0x20 0x2 0x21 0x2>; + interrupt-parent = <&mpic>; + phy-handle = <&phy2>; + phy-connection-type = "gmii"; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4500 0x100>; + clock-frequency = <0>; + interrupts = <0x2a 0x2>; + interrupt-parent = <&mpic>; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4600 0x100>; + clock-frequency = <0>; + interrupts = <0x1c 0x2>; + interrupt-parent = <&mpic>; + }; + + mpic: pic@40000 { + clock-frequency = <0>; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x40000 0x40000>; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + }; + + global-utilities@e0000 { + compatible = "fsl,mpc8641-guts"; + reg = <0xe0000 0x1000>; + fsl,has-rstcr; + }; + }; + + pci0: pcie@fef08000 { + compatible = "fsl,mpc8641-pcie"; + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xfef08000 0x1000>; + bus-range = <0x0 0xff>; + ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x40000000 + 0x01000000 0x0 0x00000000 0xfe000000 0x0 0x00400000>; + clock-frequency = <33333333>; + interrupt-parent = <&mpic>; + interrupts = <0x18 0x2>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + 0x0000 0x0 0x0 0x1 &mpic 0x0 0x2 + 0x0000 0x0 0x0 0x2 &mpic 0x1 0x2 + 0x0000 0x0 0x0 0x3 &mpic 0x2 0x2 + 0x0000 0x0 0x0 0x4 &mpic 0x3 0x2 + >; + + pcie@0 { + reg = <0 0 0 0 0>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + ranges = <0x02000000 0x0 0x80000000 + 0x02000000 0x0 0x80000000 + 0x0 0x40000000 + + 0x01000000 0x0 0x00000000 + 0x01000000 0x0 0x00000000 + 0x0 0x00400000>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/lite5200.dts b/arch/powerpc/boot/dts/lite5200.dts index 3f7a5dce8de0..de30b3f9eb26 100644 --- a/arch/powerpc/boot/dts/lite5200.dts +++ b/arch/powerpc/boot/dts/lite5200.dts @@ -17,6 +17,7 @@ compatible = "fsl,lite5200"; #address-cells = <1>; #size-cells = <1>; + interrupt-parent = <&mpc5200_pic>; cpus { #address-cells = <1>; @@ -58,96 +59,74 @@ // 5200 interrupts are encoded into two levels; interrupt-controller; #interrupt-cells = <3>; - device_type = "interrupt-controller"; compatible = "fsl,mpc5200-pic"; reg = <0x500 0x80>; }; timer@600 { // General Purpose Timer compatible = "fsl,mpc5200-gpt"; - cell-index = <0>; reg = <0x600 0x10>; interrupts = <1 9 0>; - interrupt-parent = <&mpc5200_pic>; fsl,has-wdt; }; timer@610 { // General Purpose Timer compatible = "fsl,mpc5200-gpt"; - cell-index = <1>; reg = <0x610 0x10>; interrupts = <1 10 0>; - interrupt-parent = <&mpc5200_pic>; }; timer@620 { // General Purpose Timer compatible = "fsl,mpc5200-gpt"; - cell-index = <2>; reg = <0x620 0x10>; interrupts = <1 11 0>; - interrupt-parent = <&mpc5200_pic>; }; timer@630 { // General Purpose Timer compatible = "fsl,mpc5200-gpt"; - cell-index = <3>; reg = <0x630 0x10>; interrupts = <1 12 0>; - interrupt-parent = <&mpc5200_pic>; }; timer@640 { // General Purpose Timer compatible = "fsl,mpc5200-gpt"; - cell-index = <4>; reg = <0x640 0x10>; interrupts = <1 13 0>; - interrupt-parent = <&mpc5200_pic>; }; timer@650 { // General Purpose Timer compatible = "fsl,mpc5200-gpt"; - cell-index = <5>; reg = <0x650 0x10>; interrupts = <1 14 0>; - interrupt-parent = <&mpc5200_pic>; }; timer@660 { // General Purpose Timer compatible = "fsl,mpc5200-gpt"; - cell-index = <6>; reg = <0x660 0x10>; interrupts = <1 15 0>; - interrupt-parent = <&mpc5200_pic>; }; timer@670 { // General Purpose Timer compatible = "fsl,mpc5200-gpt"; - cell-index = <7>; reg = <0x670 0x10>; interrupts = <1 16 0>; - interrupt-parent = <&mpc5200_pic>; }; rtc@800 { // Real time clock compatible = "fsl,mpc5200-rtc"; reg = <0x800 0x100>; interrupts = <1 5 0 1 6 0>; - interrupt-parent = <&mpc5200_pic>; }; can@900 { compatible = "fsl,mpc5200-mscan"; - cell-index = <0>; interrupts = <2 17 0>; - interrupt-parent = <&mpc5200_pic>; reg = <0x900 0x80>; }; can@980 { compatible = "fsl,mpc5200-mscan"; - cell-index = <1>; interrupts = <2 18 0>; - interrupt-parent = <&mpc5200_pic>; reg = <0x980 0x80>; }; @@ -155,39 +134,33 @@ compatible = "fsl,mpc5200-gpio"; reg = <0xb00 0x40>; interrupts = <1 7 0>; - interrupt-parent = <&mpc5200_pic>; }; gpio@c00 { compatible = "fsl,mpc5200-gpio-wkup"; reg = <0xc00 0x40>; interrupts = <1 8 0 0 3 0>; - interrupt-parent = <&mpc5200_pic>; }; spi@f00 { compatible = "fsl,mpc5200-spi"; reg = <0xf00 0x20>; interrupts = <2 13 0 2 14 0>; - interrupt-parent = <&mpc5200_pic>; }; usb@1000 { compatible = "fsl,mpc5200-ohci","ohci-be"; reg = <0x1000 0xff>; interrupts = <2 6 0>; - interrupt-parent = <&mpc5200_pic>; }; dma-controller@1200 { - device_type = "dma-controller"; compatible = "fsl,mpc5200-bestcomm"; reg = <0x1200 0x80>; interrupts = <3 0 0 3 1 0 3 2 0 3 3 0 3 4 0 3 5 0 3 6 0 3 7 0 3 8 0 3 9 0 3 10 0 3 11 0 3 12 0 3 13 0 3 14 0 3 15 0>; - interrupt-parent = <&mpc5200_pic>; }; xlb@1f00 { @@ -196,13 +169,10 @@ }; serial@2000 { // PSC1 - device_type = "serial"; compatible = "fsl,mpc5200-psc-uart"; - port-number = <0>; // Logical port assignment cell-index = <0>; reg = <0x2000 0x100>; interrupts = <2 1 0>; - interrupt-parent = <&mpc5200_pic>; }; // PSC2 in ac97 mode example @@ -211,7 +181,6 @@ // cell-index = <1>; // reg = <0x2200 0x100>; // interrupts = <2 2 0>; - // interrupt-parent = <&mpc5200_pic>; //}; // PSC3 in CODEC mode example @@ -220,27 +189,22 @@ // cell-index = <2>; // reg = <0x2400 0x100>; // interrupts = <2 3 0>; - // interrupt-parent = <&mpc5200_pic>; //}; // PSC4 in uart mode example //serial@2600 { // PSC4 - // device_type = "serial"; // compatible = "fsl,mpc5200-psc-uart"; // cell-index = <3>; // reg = <0x2600 0x100>; // interrupts = <2 11 0>; - // interrupt-parent = <&mpc5200_pic>; //}; // PSC5 in uart mode example //serial@2800 { // PSC5 - // device_type = "serial"; // compatible = "fsl,mpc5200-psc-uart"; // cell-index = <4>; // reg = <0x2800 0x100>; // interrupts = <2 12 0>; - // interrupt-parent = <&mpc5200_pic>; //}; // PSC6 in spi mode example @@ -249,16 +213,13 @@ // cell-index = <5>; // reg = <0x2c00 0x100>; // interrupts = <2 4 0>; - // interrupt-parent = <&mpc5200_pic>; //}; ethernet@3000 { - device_type = "network"; compatible = "fsl,mpc5200-fec"; reg = <0x3000 0x400>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <2 5 0>; - interrupt-parent = <&mpc5200_pic>; phy-handle = <&phy0>; }; @@ -268,30 +229,24 @@ compatible = "fsl,mpc5200-mdio"; reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co. - interrupt-parent = <&mpc5200_pic>; phy0: ethernet-phy@1 { - device_type = "ethernet-phy"; reg = <1>; }; }; ata@3a00 { - device_type = "ata"; compatible = "fsl,mpc5200-ata"; reg = <0x3a00 0x100>; interrupts = <2 7 0>; - interrupt-parent = <&mpc5200_pic>; }; i2c@3d00 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,mpc5200-i2c","fsl-i2c"; - cell-index = <0>; reg = <0x3d00 0x40>; interrupts = <2 15 0>; - interrupt-parent = <&mpc5200_pic>; fsl5200-clocking; }; @@ -299,14 +254,12 @@ #address-cells = <1>; #size-cells = <0>; compatible = "fsl,mpc5200-i2c","fsl-i2c"; - cell-index = <1>; reg = <0x3d40 0x40>; interrupts = <2 16 0>; - interrupt-parent = <&mpc5200_pic>; fsl5200-clocking; }; sram@8000 { - compatible = "fsl,mpc5200-sram","sram"; + compatible = "fsl,mpc5200-sram"; reg = <0x8000 0x4000>; }; }; @@ -325,7 +278,6 @@ 0xc000 0 0 4 &mpc5200_pic 0 0 3>; clock-frequency = <0>; // From boot loader interrupts = <2 8 0 2 9 0 2 10 0>; - interrupt-parent = <&mpc5200_pic>; bus-range = <0 0>; ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000 0x02000000 0 0xa0000000 0xa0000000 0 0x10000000 diff --git a/arch/powerpc/boot/dts/lite5200b.dts b/arch/powerpc/boot/dts/lite5200b.dts index 63e3bb48e843..c63e3566479e 100644 --- a/arch/powerpc/boot/dts/lite5200b.dts +++ b/arch/powerpc/boot/dts/lite5200b.dts @@ -17,6 +17,7 @@ compatible = "fsl,lite5200b"; #address-cells = <1>; #size-cells = <1>; + interrupt-parent = <&mpc5200_pic>; cpus { #address-cells = <1>; @@ -58,136 +59,112 @@ // 5200 interrupts are encoded into two levels; interrupt-controller; #interrupt-cells = <3>; - device_type = "interrupt-controller"; compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic"; reg = <0x500 0x80>; }; timer@600 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - cell-index = <0>; reg = <0x600 0x10>; interrupts = <1 9 0>; - interrupt-parent = <&mpc5200_pic>; fsl,has-wdt; }; timer@610 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - cell-index = <1>; reg = <0x610 0x10>; interrupts = <1 10 0>; - interrupt-parent = <&mpc5200_pic>; }; timer@620 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - cell-index = <2>; reg = <0x620 0x10>; interrupts = <1 11 0>; - interrupt-parent = <&mpc5200_pic>; }; timer@630 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - cell-index = <3>; reg = <0x630 0x10>; interrupts = <1 12 0>; - interrupt-parent = <&mpc5200_pic>; }; timer@640 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - cell-index = <4>; reg = <0x640 0x10>; interrupts = <1 13 0>; - interrupt-parent = <&mpc5200_pic>; }; timer@650 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - cell-index = <5>; reg = <0x650 0x10>; interrupts = <1 14 0>; - interrupt-parent = <&mpc5200_pic>; }; timer@660 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - cell-index = <6>; reg = <0x660 0x10>; interrupts = <1 15 0>; - interrupt-parent = <&mpc5200_pic>; }; timer@670 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - cell-index = <7>; reg = <0x670 0x10>; interrupts = <1 16 0>; - interrupt-parent = <&mpc5200_pic>; }; rtc@800 { // Real time clock compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc"; reg = <0x800 0x100>; interrupts = <1 5 0 1 6 0>; - interrupt-parent = <&mpc5200_pic>; }; can@900 { compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan"; - cell-index = <0>; interrupts = <2 17 0>; - interrupt-parent = <&mpc5200_pic>; reg = <0x900 0x80>; }; can@980 { compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan"; - cell-index = <1>; interrupts = <2 18 0>; - interrupt-parent = <&mpc5200_pic>; reg = <0x980 0x80>; }; - gpio@b00 { + gpio_simple: gpio@b00 { compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio"; reg = <0xb00 0x40>; interrupts = <1 7 0>; - interrupt-parent = <&mpc5200_pic>; + gpio-controller; + #gpio-cells = <2>; }; - gpio@c00 { + gpio_wkup: gpio@c00 { compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup"; reg = <0xc00 0x40>; interrupts = <1 8 0 0 3 0>; - interrupt-parent = <&mpc5200_pic>; + gpio-controller; + #gpio-cells = <2>; }; spi@f00 { compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi"; reg = <0xf00 0x20>; interrupts = <2 13 0 2 14 0>; - interrupt-parent = <&mpc5200_pic>; }; usb@1000 { compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be"; reg = <0x1000 0xff>; interrupts = <2 6 0>; - interrupt-parent = <&mpc5200_pic>; }; dma-controller@1200 { - device_type = "dma-controller"; compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm"; reg = <0x1200 0x80>; interrupts = <3 0 0 3 1 0 3 2 0 3 3 0 3 4 0 3 5 0 3 6 0 3 7 0 3 8 0 3 9 0 3 10 0 3 11 0 3 12 0 3 13 0 3 14 0 3 15 0>; - interrupt-parent = <&mpc5200_pic>; }; xlb@1f00 { @@ -196,13 +173,10 @@ }; serial@2000 { // PSC1 - device_type = "serial"; compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; - port-number = <0>; // Logical port assignment cell-index = <0>; reg = <0x2000 0x100>; interrupts = <2 1 0>; - interrupt-parent = <&mpc5200_pic>; }; // PSC2 in ac97 mode example @@ -211,7 +185,6 @@ // cell-index = <1>; // reg = <0x2200 0x100>; // interrupts = <2 2 0>; - // interrupt-parent = <&mpc5200_pic>; //}; // PSC3 in CODEC mode example @@ -220,27 +193,22 @@ // cell-index = <2>; // reg = <0x2400 0x100>; // interrupts = <2 3 0>; - // interrupt-parent = <&mpc5200_pic>; //}; // PSC4 in uart mode example //serial@2600 { // PSC4 - // device_type = "serial"; // compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; // cell-index = <3>; // reg = <0x2600 0x100>; // interrupts = <2 11 0>; - // interrupt-parent = <&mpc5200_pic>; //}; // PSC5 in uart mode example //serial@2800 { // PSC5 - // device_type = "serial"; // compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; // cell-index = <4>; // reg = <0x2800 0x100>; // interrupts = <2 12 0>; - // interrupt-parent = <&mpc5200_pic>; //}; // PSC6 in spi mode example @@ -249,49 +217,40 @@ // cell-index = <5>; // reg = <0x2c00 0x100>; // interrupts = <2 4 0>; - // interrupt-parent = <&mpc5200_pic>; //}; ethernet@3000 { - device_type = "network"; compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec"; reg = <0x3000 0x400>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <2 5 0>; - interrupt-parent = <&mpc5200_pic>; phy-handle = <&phy0>; }; mdio@3000 { #address-cells = <1>; #size-cells = <0>; - compatible = "fsl,mpc5200b-mdio", "fsl,mpc5200-mdio"; + compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio"; reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co. - interrupt-parent = <&mpc5200_pic>; phy0: ethernet-phy@0 { - device_type = "ethernet-phy"; reg = <0>; }; }; ata@3a00 { - device_type = "ata"; compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata"; reg = <0x3a00 0x100>; interrupts = <2 7 0>; - interrupt-parent = <&mpc5200_pic>; }; i2c@3d00 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; - cell-index = <0>; reg = <0x3d00 0x40>; interrupts = <2 15 0>; - interrupt-parent = <&mpc5200_pic>; fsl5200-clocking; }; @@ -299,14 +258,13 @@ #address-cells = <1>; #size-cells = <0>; compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; - cell-index = <1>; reg = <0x3d40 0x40>; interrupts = <2 16 0>; - interrupt-parent = <&mpc5200_pic>; fsl5200-clocking; }; + sram@8000 { - compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram","sram"; + compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram"; reg = <0x8000 0x4000>; }; }; @@ -330,7 +288,6 @@ 0xc800 0 0 4 &mpc5200_pic 0 0 3>; clock-frequency = <0>; // From boot loader interrupts = <2 8 0 2 9 0 2 10 0>; - interrupt-parent = <&mpc5200_pic>; bus-range = <0 0>; ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000 0x02000000 0 0xa0000000 0xa0000000 0 0x10000000 diff --git a/arch/powerpc/boot/dts/media5200.dts b/arch/powerpc/boot/dts/media5200.dts new file mode 100644 index 000000000000..e297d8b41875 --- /dev/null +++ b/arch/powerpc/boot/dts/media5200.dts @@ -0,0 +1,318 @@ +/* + * Freescale Media5200 board Device Tree Source + * + * Copyright 2009 Secret Lab Technologies Ltd. + * Grant Likely <grant.likely@secretlab.ca> + * Steven Cavanagh <scavanagh@secretlab.ca> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/ { + model = "fsl,media5200"; + compatible = "fsl,media5200"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&mpc5200_pic>; + + aliases { + console = &console; + ethernet0 = ð0; + }; + + chosen { + linux,stdout-path = &console; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,5200@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <0x4000>; // L1, 16K + i-cache-size = <0x4000>; // L1, 16K + timebase-frequency = <33000000>; // 33 MHz, these were configured by U-Boot + bus-frequency = <132000000>; // 132 MHz + clock-frequency = <396000000>; // 396 MHz + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x08000000>; // 128MB RAM + }; + + soc@f0000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc5200b-immr"; + ranges = <0 0xf0000000 0x0000c000>; + reg = <0xf0000000 0x00000100>; + bus-frequency = <132000000>;// 132 MHz + system-frequency = <0>; // from bootloader + + cdm@200 { + compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm"; + reg = <0x200 0x38>; + }; + + mpc5200_pic: interrupt-controller@500 { + // 5200 interrupts are encoded into two levels; + interrupt-controller; + #interrupt-cells = <3>; + compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic"; + reg = <0x500 0x80>; + }; + + timer@600 { // General Purpose Timer + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + reg = <0x600 0x10>; + interrupts = <1 9 0>; + fsl,has-wdt; + }; + + timer@610 { // General Purpose Timer + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + reg = <0x610 0x10>; + interrupts = <1 10 0>; + }; + + timer@620 { // General Purpose Timer + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + reg = <0x620 0x10>; + interrupts = <1 11 0>; + }; + + timer@630 { // General Purpose Timer + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + reg = <0x630 0x10>; + interrupts = <1 12 0>; + }; + + timer@640 { // General Purpose Timer + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + reg = <0x640 0x10>; + interrupts = <1 13 0>; + }; + + timer@650 { // General Purpose Timer + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + reg = <0x650 0x10>; + interrupts = <1 14 0>; + }; + + timer@660 { // General Purpose Timer + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + reg = <0x660 0x10>; + interrupts = <1 15 0>; + }; + + timer@670 { // General Purpose Timer + compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; + reg = <0x670 0x10>; + interrupts = <1 16 0>; + }; + + rtc@800 { // Real time clock + compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc"; + reg = <0x800 0x100>; + interrupts = <1 5 0 1 6 0>; + }; + + can@900 { + compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan"; + interrupts = <2 17 0>; + reg = <0x900 0x80>; + }; + + can@980 { + compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan"; + interrupts = <2 18 0>; + reg = <0x980 0x80>; + }; + + gpio_simple: gpio@b00 { + compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio"; + reg = <0xb00 0x40>; + interrupts = <1 7 0>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpio_wkup: gpio@c00 { + compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup"; + reg = <0xc00 0x40>; + interrupts = <1 8 0 0 3 0>; + gpio-controller; + #gpio-cells = <2>; + }; + + spi@f00 { + compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi"; + reg = <0xf00 0x20>; + interrupts = <2 13 0 2 14 0>; + }; + + usb@1000 { + compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be"; + reg = <0x1000 0x100>; + interrupts = <2 6 0>; + }; + + dma-controller@1200 { + compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm"; + reg = <0x1200 0x80>; + interrupts = <3 0 0 3 1 0 3 2 0 3 3 0 + 3 4 0 3 5 0 3 6 0 3 7 0 + 3 8 0 3 9 0 3 10 0 3 11 0 + 3 12 0 3 13 0 3 14 0 3 15 0>; + }; + + xlb@1f00 { + compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb"; + reg = <0x1f00 0x100>; + }; + + // PSC6 in uart mode + console: serial@2c00 { // PSC6 + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; + cell-index = <5>; + port-number = <0>; // Logical port assignment + reg = <0x2c00 0x100>; + interrupts = <2 4 0>; + }; + + eth0: ethernet@3000 { + compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec"; + reg = <0x3000 0x400>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <2 5 0>; + phy-handle = <&phy0>; + }; + + mdio@3000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio"; + reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts + interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co. + + phy0: ethernet-phy@0 { + reg = <0>; + }; + }; + + ata@3a00 { + compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata"; + reg = <0x3a00 0x100>; + interrupts = <2 7 0>; + }; + + i2c@3d00 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; + reg = <0x3d00 0x40>; + interrupts = <2 15 0>; + fsl5200-clocking; + }; + + i2c@3d40 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; + reg = <0x3d40 0x40>; + interrupts = <2 16 0>; + fsl5200-clocking; + }; + + sram@8000 { + compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram"; + reg = <0x8000 0x4000>; + }; + }; + + pci@f0000d00 { + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + compatible = "fsl,mpc5200b-pci","fsl,mpc5200-pci"; + reg = <0xf0000d00 0x100>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = <0xc000 0 0 1 &media5200_fpga 0 2 // 1st slot + 0xc000 0 0 2 &media5200_fpga 0 3 + 0xc000 0 0 3 &media5200_fpga 0 4 + 0xc000 0 0 4 &media5200_fpga 0 5 + + 0xc800 0 0 1 &media5200_fpga 0 3 // 2nd slot + 0xc800 0 0 2 &media5200_fpga 0 4 + 0xc800 0 0 3 &media5200_fpga 0 5 + 0xc800 0 0 4 &media5200_fpga 0 2 + + 0xd000 0 0 1 &media5200_fpga 0 4 // miniPCI + 0xd000 0 0 2 &media5200_fpga 0 5 + + 0xe000 0 0 1 &media5200_fpga 0 5 // CoralIP + >; + clock-frequency = <0>; // From boot loader + interrupts = <2 8 0 2 9 0 2 10 0>; + interrupt-parent = <&mpc5200_pic>; + bus-range = <0 0>; + ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000 + 0x02000000 0 0xa0000000 0xa0000000 0 0x10000000 + 0x01000000 0 0x00000000 0xb0000000 0 0x01000000>; + }; + + localbus { + compatible = "fsl,mpc5200b-lpb","simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + + ranges = < 0 0 0xfc000000 0x02000000 + 1 0 0xfe000000 0x02000000 + 2 0 0xf0010000 0x00010000 + 3 0 0xf0020000 0x00010000 >; + + flash@0,0 { + compatible = "amd,am29lv28ml", "cfi-flash"; + reg = <0 0x0 0x2000000>; // 32 MB + bank-width = <4>; // Width in bytes of the flash bank + device-width = <2>; // Two devices on each bank + }; + + flash@1,0 { + compatible = "amd,am29lv28ml", "cfi-flash"; + reg = <1 0 0x2000000>; // 32 MB + bank-width = <4>; // Width in bytes of the flash bank + device-width = <2>; // Two devices on each bank + }; + + media5200_fpga: fpga@2,0 { + compatible = "fsl,media5200-fpga"; + interrupt-controller; + #interrupt-cells = <2>; // 0:bank 1:id; no type field + reg = <2 0 0x10000>; + + interrupt-parent = <&mpc5200_pic>; + interrupts = <0 0 3 // IRQ bank 0 + 1 1 3>; // IRQ bank 1 + }; + + uart@3,0 { + compatible = "ti,tl16c752bpt"; + reg = <3 0 0x10000>; + interrupt-parent = <&media5200_fpga>; + interrupts = <0 0 0 1>; // 2 irqs + }; + }; +}; diff --git a/arch/powerpc/boot/dts/motionpro.dts b/arch/powerpc/boot/dts/motionpro.dts index 52ba6f98b273..7be8ca038676 100644 --- a/arch/powerpc/boot/dts/motionpro.dts +++ b/arch/powerpc/boot/dts/motionpro.dts @@ -17,6 +17,7 @@ compatible = "promess,motionpro"; #address-cells = <1>; #size-cells = <1>; + interrupt-parent = <&mpc5200_pic>; cpus { #address-cells = <1>; @@ -66,7 +67,6 @@ compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; reg = <0x600 0x10>; interrupts = <1 9 0>; - interrupt-parent = <&mpc5200_pic>; fsl,has-wdt; }; @@ -74,35 +74,30 @@ compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; reg = <0x610 0x10>; interrupts = <1 10 0>; - interrupt-parent = <&mpc5200_pic>; }; timer@620 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; reg = <0x620 0x10>; interrupts = <1 11 0>; - interrupt-parent = <&mpc5200_pic>; }; timer@630 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; reg = <0x630 0x10>; interrupts = <1 12 0>; - interrupt-parent = <&mpc5200_pic>; }; timer@640 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; reg = <0x640 0x10>; interrupts = <1 13 0>; - interrupt-parent = <&mpc5200_pic>; }; timer@650 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; reg = <0x650 0x10>; interrupts = <1 14 0>; - interrupt-parent = <&mpc5200_pic>; }; motionpro-led@660 { // Motion-PRO status LED @@ -110,7 +105,6 @@ label = "motionpro-statusled"; reg = <0x660 0x10>; interrupts = <1 15 0>; - interrupt-parent = <&mpc5200_pic>; blink-delay = <100>; // 100 msec }; @@ -119,49 +113,46 @@ label = "motionpro-readyled"; reg = <0x670 0x10>; interrupts = <1 16 0>; - interrupt-parent = <&mpc5200_pic>; }; rtc@800 { // Real time clock compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc"; reg = <0x800 0x100>; interrupts = <1 5 0 1 6 0>; - interrupt-parent = <&mpc5200_pic>; }; can@980 { compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan"; interrupts = <2 18 0>; - interrupt-parent = <&mpc5200_pic>; reg = <0x980 0x80>; }; - gpio@b00 { + gpio_simple: gpio@b00 { compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio"; reg = <0xb00 0x40>; interrupts = <1 7 0>; - interrupt-parent = <&mpc5200_pic>; + gpio-controller; + #gpio-cells = <2>; }; - gpio@c00 { + gpio_wkup: gpio@c00 { compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup"; reg = <0xc00 0x40>; interrupts = <1 8 0 0 3 0>; - interrupt-parent = <&mpc5200_pic>; + gpio-controller; + #gpio-cells = <2>; }; spi@f00 { compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi"; reg = <0xf00 0x20>; interrupts = <2 13 0 2 14 0>; - interrupt-parent = <&mpc5200_pic>; }; usb@1000 { compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be"; reg = <0x1000 0xff>; interrupts = <2 6 0>; - interrupt-parent = <&mpc5200_pic>; }; dma-controller@1200 { @@ -171,7 +162,6 @@ 3 4 0 3 5 0 3 6 0 3 7 0 3 8 0 3 9 0 3 10 0 3 11 0 3 12 0 3 13 0 3 14 0 3 15 0>; - interrupt-parent = <&mpc5200_pic>; }; xlb@1f00 { @@ -180,12 +170,9 @@ }; serial@2000 { // PSC1 - device_type = "serial"; compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; - port-number = <0>; // Logical port assignment reg = <0x2000 0x100>; interrupts = <2 1 0>; - interrupt-parent = <&mpc5200_pic>; }; // PSC2 in spi master mode @@ -194,26 +181,20 @@ cell-index = <1>; reg = <0x2200 0x100>; interrupts = <2 2 0>; - interrupt-parent = <&mpc5200_pic>; }; // PSC5 in uart mode serial@2800 { // PSC5 - device_type = "serial"; compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; - port-number = <4>; // Logical port assignment reg = <0x2800 0x100>; interrupts = <2 12 0>; - interrupt-parent = <&mpc5200_pic>; }; ethernet@3000 { - device_type = "network"; compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec"; reg = <0x3000 0x400>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <2 5 0>; - interrupt-parent = <&mpc5200_pic>; phy-handle = <&phy0>; }; @@ -223,10 +204,8 @@ compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio"; reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co. - interrupt-parent = <&mpc5200_pic>; phy0: ethernet-phy@2 { - device_type = "ethernet-phy"; reg = <2>; }; }; @@ -235,7 +214,6 @@ compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata"; reg = <0x3a00 0x100>; interrupts = <2 7 0>; - interrupt-parent = <&mpc5200_pic>; }; i2c@3d40 { @@ -244,7 +222,6 @@ compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; reg = <0x3d40 0x40>; interrupts = <2 16 0>; - interrupt-parent = <&mpc5200_pic>; fsl5200-clocking; rtc@68 { @@ -259,8 +236,8 @@ }; }; - lpb { - compatible = "fsl,lpb"; + localbus { + compatible = "fsl,mpc5200b-lpb","simple-bus"; #address-cells = <2>; #size-cells = <1>; ranges = <0 0 0xff000000 0x01000000 @@ -273,7 +250,6 @@ compatible = "promess,motionpro-kollmorgen"; reg = <1 0 0x10000>; interrupts = <1 1 0>; - interrupt-parent = <&mpc5200_pic>; }; // 8-bit board CPLD on LocalPlus Bus CS2 diff --git a/arch/powerpc/boot/dts/mpc8315erdb.dts b/arch/powerpc/boot/dts/mpc8315erdb.dts index 71784165b77e..88d691cccb38 100644 --- a/arch/powerpc/boot/dts/mpc8315erdb.dts +++ b/arch/powerpc/boot/dts/mpc8315erdb.dts @@ -22,6 +22,8 @@ serial0 = &serial0; serial1 = &serial1; pci0 = &pci0; + pci1 = &pci1; + pci2 = &pci2; }; cpus { @@ -349,4 +351,66 @@ compatible = "fsl,mpc8349-pci"; device_type = "pci"; }; + + pci1: pcie@e0009000 { + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + compatible = "fsl,mpc8315-pcie", "fsl,mpc8314-pcie"; + reg = <0xe0009000 0x00001000>; + ranges = <0x02000000 0 0xa0000000 0xa0000000 0 0x10000000 + 0x01000000 0 0x00000000 0xb1000000 0 0x00800000>; + bus-range = <0 255>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = <0 0 0 1 &ipic 1 8 + 0 0 0 2 &ipic 1 8 + 0 0 0 3 &ipic 1 8 + 0 0 0 4 &ipic 1 8>; + clock-frequency = <0>; + + pcie@0 { + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + reg = <0 0 0 0 0>; + ranges = <0x02000000 0 0xa0000000 + 0x02000000 0 0xa0000000 + 0 0x10000000 + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00800000>; + }; + }; + + pci2: pcie@e000a000 { + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + compatible = "fsl,mpc8315-pcie", "fsl,mpc8314-pcie"; + reg = <0xe000a000 0x00001000>; + ranges = <0x02000000 0 0xc0000000 0xc0000000 0 0x10000000 + 0x01000000 0 0x00000000 0xd1000000 0 0x00800000>; + bus-range = <0 255>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = <0 0 0 1 &ipic 2 8 + 0 0 0 2 &ipic 2 8 + 0 0 0 3 &ipic 2 8 + 0 0 0 4 &ipic 2 8>; + clock-frequency = <0>; + + pcie@0 { + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + reg = <0 0 0 0 0>; + ranges = <0x02000000 0 0xc0000000 + 0x02000000 0 0xc0000000 + 0 0x10000000 + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00800000>; + }; + }; }; diff --git a/arch/powerpc/boot/dts/mpc8377_mds.dts b/arch/powerpc/boot/dts/mpc8377_mds.dts index 1d14d7052e6d..3e3ec8fdef49 100644 --- a/arch/powerpc/boot/dts/mpc8377_mds.dts +++ b/arch/powerpc/boot/dts/mpc8377_mds.dts @@ -23,6 +23,8 @@ serial0 = &serial0; serial1 = &serial1; pci0 = &pci0; + pci1 = &pci1; + pci2 = &pci2; }; cpus { @@ -311,12 +313,13 @@ fsl,descriptor-types-mask = <0x3ab0ebf>; }; - sdhc@2e000 { - model = "eSDHC"; - compatible = "fsl,esdhc"; + sdhci@2e000 { + compatible = "fsl,mpc8377-esdhc", "fsl,mpc8379-esdhc"; reg = <0x2e000 0x1000>; interrupts = <42 0x8>; interrupt-parent = <&ipic>; + /* Filled in by U-Boot */ + clock-frequency = <0>; }; sata@18000 { @@ -409,4 +412,66 @@ compatible = "fsl,mpc8349-pci"; device_type = "pci"; }; + + pci1: pcie@e0009000 { + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + compatible = "fsl,mpc8377-pcie", "fsl,mpc8314-pcie"; + reg = <0xe0009000 0x00001000>; + ranges = <0x02000000 0 0xa8000000 0xa8000000 0 0x10000000 + 0x01000000 0 0x00000000 0xb8000000 0 0x00800000>; + bus-range = <0 255>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = <0 0 0 1 &ipic 1 8 + 0 0 0 2 &ipic 1 8 + 0 0 0 3 &ipic 1 8 + 0 0 0 4 &ipic 1 8>; + clock-frequency = <0>; + + pcie@0 { + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + reg = <0 0 0 0 0>; + ranges = <0x02000000 0 0xa8000000 + 0x02000000 0 0xa8000000 + 0 0x10000000 + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00800000>; + }; + }; + + pci2: pcie@e000a000 { + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + compatible = "fsl,mpc8377-pcie", "fsl,mpc8314-pcie"; + reg = <0xe000a000 0x00001000>; + ranges = <0x02000000 0 0xc8000000 0xc8000000 0 0x10000000 + 0x01000000 0 0x00000000 0xd8000000 0 0x00800000>; + bus-range = <0 255>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = <0 0 0 1 &ipic 2 8 + 0 0 0 2 &ipic 2 8 + 0 0 0 3 &ipic 2 8 + 0 0 0 4 &ipic 2 8>; + clock-frequency = <0>; + + pcie@0 { + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + reg = <0 0 0 0 0>; + ranges = <0x02000000 0 0xc8000000 + 0x02000000 0 0xc8000000 + 0 0x10000000 + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00800000>; + }; + }; }; diff --git a/arch/powerpc/boot/dts/mpc8377_rdb.dts b/arch/powerpc/boot/dts/mpc8377_rdb.dts index 9413af3b9925..fb1d884348ec 100644 --- a/arch/powerpc/boot/dts/mpc8377_rdb.dts +++ b/arch/powerpc/boot/dts/mpc8377_rdb.dts @@ -22,6 +22,8 @@ serial0 = &serial0; serial1 = &serial1; pci0 = &pci0; + pci1 = &pci1; + pci2 = &pci2; }; cpus { @@ -107,6 +109,24 @@ reg = <0x200 0x100>; }; + gpio1: gpio-controller@c00 { + #gpio-cells = <2>; + compatible = "fsl,mpc8377-gpio", "fsl,mpc8349-gpio"; + reg = <0xc00 0x100>; + interrupts = <74 0x8>; + interrupt-parent = <&ipic>; + gpio-controller; + }; + + gpio2: gpio-controller@d00 { + #gpio-cells = <2>; + compatible = "fsl,mpc8377-gpio", "fsl,mpc8349-gpio"; + reg = <0xd00 0x100>; + interrupts = <75 0x8>; + interrupt-parent = <&ipic>; + gpio-controller; + }; + i2c@3000 { #address-cells = <1>; #size-cells = <0>; @@ -116,6 +136,17 @@ interrupts = <14 0x8>; interrupt-parent = <&ipic>; dfsrr; + + dtt@48 { + compatible = "national,lm75"; + reg = <0x48>; + }; + + at24@50 { + compatible = "at24,24c256"; + reg = <0x50>; + }; + rtc@68 { compatible = "dallas,ds1339"; reg = <0x68>; @@ -289,6 +320,15 @@ fsl,descriptor-types-mask = <0x3ab0ebf>; }; + sdhci@2e000 { + compatible = "fsl,mpc8377-esdhc", "fsl,mpc8379-esdhc"; + reg = <0x2e000 0x1000>; + interrupts = <42 0x8>; + interrupt-parent = <&ipic>; + /* Filled in by U-Boot */ + clock-frequency = <0>; + }; + sata@18000 { compatible = "fsl,mpc8377-sata", "fsl,pq-sata"; reg = <0x18000 0x1000>; @@ -350,4 +390,66 @@ compatible = "fsl,mpc8349-pci"; device_type = "pci"; }; + + pci1: pcie@e0009000 { + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + compatible = "fsl,mpc8377-pcie", "fsl,mpc8314-pcie"; + reg = <0xe0009000 0x00001000>; + ranges = <0x02000000 0 0xa8000000 0xa8000000 0 0x10000000 + 0x01000000 0 0x00000000 0xb8000000 0 0x00800000>; + bus-range = <0 255>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = <0 0 0 1 &ipic 1 8 + 0 0 0 2 &ipic 1 8 + 0 0 0 3 &ipic 1 8 + 0 0 0 4 &ipic 1 8>; + clock-frequency = <0>; + + pcie@0 { + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + reg = <0 0 0 0 0>; + ranges = <0x02000000 0 0xa8000000 + 0x02000000 0 0xa8000000 + 0 0x10000000 + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00800000>; + }; + }; + + pci2: pcie@e000a000 { + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + compatible = "fsl,mpc8377-pcie", "fsl,mpc8314-pcie"; + reg = <0xe000a000 0x00001000>; + ranges = <0x02000000 0 0xc8000000 0xc8000000 0 0x10000000 + 0x01000000 0 0x00000000 0xd8000000 0 0x00800000>; + bus-range = <0 255>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = <0 0 0 1 &ipic 2 8 + 0 0 0 2 &ipic 2 8 + 0 0 0 3 &ipic 2 8 + 0 0 0 4 &ipic 2 8>; + clock-frequency = <0>; + + pcie@0 { + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + reg = <0 0 0 0 0>; + ranges = <0x02000000 0 0xc8000000 + 0x02000000 0 0xc8000000 + 0 0x10000000 + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00800000>; + }; + }; }; diff --git a/arch/powerpc/boot/dts/mpc8378_mds.dts b/arch/powerpc/boot/dts/mpc8378_mds.dts index b85fc02682d2..c3b212cf9025 100644 --- a/arch/powerpc/boot/dts/mpc8378_mds.dts +++ b/arch/powerpc/boot/dts/mpc8378_mds.dts @@ -23,6 +23,8 @@ serial0 = &serial0; serial1 = &serial1; pci0 = &pci0; + pci1 = &pci1; + pci2 = &pci2; }; cpus { @@ -311,12 +313,13 @@ fsl,descriptor-types-mask = <0x3ab0ebf>; }; - sdhc@2e000 { - model = "eSDHC"; - compatible = "fsl,esdhc"; + sdhci@2e000 { + compatible = "fsl,mpc8378-esdhc", "fsl,mpc8379-esdhc"; reg = <0x2e000 0x1000>; interrupts = <42 0x8>; interrupt-parent = <&ipic>; + /* Filled in by U-Boot */ + clock-frequency = <0>; }; /* IPIC @@ -395,4 +398,66 @@ compatible = "fsl,mpc8349-pci"; device_type = "pci"; }; + + pci1: pcie@e0009000 { + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + compatible = "fsl,mpc8378-pcie", "fsl,mpc8314-pcie"; + reg = <0xe0009000 0x00001000>; + ranges = <0x02000000 0 0xa8000000 0xa8000000 0 0x10000000 + 0x01000000 0 0x00000000 0xb8000000 0 0x00800000>; + bus-range = <0 255>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = <0 0 0 1 &ipic 1 8 + 0 0 0 2 &ipic 1 8 + 0 0 0 3 &ipic 1 8 + 0 0 0 4 &ipic 1 8>; + clock-frequency = <0>; + + pcie@0 { + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + reg = <0 0 0 0 0>; + ranges = <0x02000000 0 0xa8000000 + 0x02000000 0 0xa8000000 + 0 0x10000000 + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00800000>; + }; + }; + + pci2: pcie@e000a000 { + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + compatible = "fsl,mpc8378-pcie", "fsl,mpc8314-pcie"; + reg = <0xe000a000 0x00001000>; + ranges = <0x02000000 0 0xc8000000 0xc8000000 0 0x10000000 + 0x01000000 0 0x00000000 0xd8000000 0 0x00800000>; + bus-range = <0 255>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = <0 0 0 1 &ipic 2 8 + 0 0 0 2 &ipic 2 8 + 0 0 0 3 &ipic 2 8 + 0 0 0 4 &ipic 2 8>; + clock-frequency = <0>; + + pcie@0 { + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + reg = <0 0 0 0 0>; + ranges = <0x02000000 0 0xc8000000 + 0x02000000 0 0xc8000000 + 0 0x10000000 + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00800000>; + }; + }; }; diff --git a/arch/powerpc/boot/dts/mpc8378_rdb.dts b/arch/powerpc/boot/dts/mpc8378_rdb.dts index 23c10ce22c2c..37c8555cc8d4 100644 --- a/arch/powerpc/boot/dts/mpc8378_rdb.dts +++ b/arch/powerpc/boot/dts/mpc8378_rdb.dts @@ -22,6 +22,8 @@ serial0 = &serial0; serial1 = &serial1; pci0 = &pci0; + pci1 = &pci1; + pci2 = &pci2; }; cpus { @@ -107,6 +109,24 @@ reg = <0x200 0x100>; }; + gpio1: gpio-controller@c00 { + #gpio-cells = <2>; + compatible = "fsl,mpc8378-gpio", "fsl,mpc8349-gpio"; + reg = <0xc00 0x100>; + interrupts = <74 0x8>; + interrupt-parent = <&ipic>; + gpio-controller; + }; + + gpio2: gpio-controller@d00 { + #gpio-cells = <2>; + compatible = "fsl,mpc8378-gpio", "fsl,mpc8349-gpio"; + reg = <0xd00 0x100>; + interrupts = <75 0x8>; + interrupt-parent = <&ipic>; + gpio-controller; + }; + i2c@3000 { #address-cells = <1>; #size-cells = <0>; @@ -116,6 +136,17 @@ interrupts = <14 0x8>; interrupt-parent = <&ipic>; dfsrr; + + dtt@48 { + compatible = "national,lm75"; + reg = <0x48>; + }; + + at24@50 { + compatible = "at24,24c256"; + reg = <0x50>; + }; + rtc@68 { compatible = "dallas,ds1339"; reg = <0x68>; @@ -287,6 +318,15 @@ fsl,descriptor-types-mask = <0x3ab0ebf>; }; + sdhci@2e000 { + compatible = "fsl,mpc8378-esdhc", "fsl,mpc8379-esdhc"; + reg = <0x2e000 0x1000>; + interrupts = <42 0x8>; + interrupt-parent = <&ipic>; + /* Filled in by U-Boot */ + clock-frequency = <0>; + }; + /* IPIC * interrupts cell = <intr #, sense> * sense values match linux IORESOURCE_IRQ_* defines: @@ -334,4 +374,66 @@ compatible = "fsl,mpc8349-pci"; device_type = "pci"; }; + + pci1: pcie@e0009000 { + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + compatible = "fsl,mpc8378-pcie", "fsl,mpc8314-pcie"; + reg = <0xe0009000 0x00001000>; + ranges = <0x02000000 0 0xa8000000 0xa8000000 0 0x10000000 + 0x01000000 0 0x00000000 0xb8000000 0 0x00800000>; + bus-range = <0 255>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = <0 0 0 1 &ipic 1 8 + 0 0 0 2 &ipic 1 8 + 0 0 0 3 &ipic 1 8 + 0 0 0 4 &ipic 1 8>; + clock-frequency = <0>; + + pcie@0 { + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + reg = <0 0 0 0 0>; + ranges = <0x02000000 0 0xa8000000 + 0x02000000 0 0xa8000000 + 0 0x10000000 + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00800000>; + }; + }; + + pci2: pcie@e000a000 { + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + compatible = "fsl,mpc8378-pcie", "fsl,mpc8314-pcie"; + reg = <0xe000a000 0x00001000>; + ranges = <0x02000000 0 0xc8000000 0xc8000000 0 0x10000000 + 0x01000000 0 0x00000000 0xd8000000 0 0x00800000>; + bus-range = <0 255>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = <0 0 0 1 &ipic 2 8 + 0 0 0 2 &ipic 2 8 + 0 0 0 3 &ipic 2 8 + 0 0 0 4 &ipic 2 8>; + clock-frequency = <0>; + + pcie@0 { + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + reg = <0 0 0 0 0>; + ranges = <0x02000000 0 0xc8000000 + 0x02000000 0 0xc8000000 + 0 0x10000000 + 0x01000000 0 0x00000000 + 0x01000000 0 0x00000000 + 0 0x00800000>; + }; + }; }; diff --git a/arch/powerpc/boot/dts/mpc8379_mds.dts b/arch/powerpc/boot/dts/mpc8379_mds.dts index acf06c438dbf..1b61cda1eb47 100644 --- a/arch/powerpc/boot/dts/mpc8379_mds.dts +++ b/arch/powerpc/boot/dts/mpc8379_mds.dts @@ -310,12 +310,13 @@ fsl,descriptor-types-mask = <0x3ab0ebf>; }; - sdhc@2e000 { - model = "eSDHC"; - compatible = "fsl,esdhc"; + sdhci@2e000 { + compatible = "fsl,mpc8379-esdhc"; reg = <0x2e000 0x1000>; interrupts = <42 0x8>; interrupt-parent = <&ipic>; + /* Filled in by U-Boot */ + clock-frequency = <0>; }; sata@18000 { diff --git a/arch/powerpc/boot/dts/mpc8379_rdb.dts b/arch/powerpc/boot/dts/mpc8379_rdb.dts index 72cdc3c4c7e3..e2f98e6a51a2 100644 --- a/arch/powerpc/boot/dts/mpc8379_rdb.dts +++ b/arch/powerpc/boot/dts/mpc8379_rdb.dts @@ -107,6 +107,24 @@ reg = <0x200 0x100>; }; + gpio1: gpio-controller@c00 { + #gpio-cells = <2>; + compatible = "fsl,mpc8379-gpio", "fsl,mpc8349-gpio"; + reg = <0xc00 0x100>; + interrupts = <74 0x8>; + interrupt-parent = <&ipic>; + gpio-controller; + }; + + gpio2: gpio-controller@d00 { + #gpio-cells = <2>; + compatible = "fsl,mpc8379-gpio", "fsl,mpc8349-gpio"; + reg = <0xd00 0x100>; + interrupts = <75 0x8>; + interrupt-parent = <&ipic>; + gpio-controller; + }; + i2c@3000 { #address-cells = <1>; #size-cells = <0>; @@ -116,6 +134,17 @@ interrupts = <14 0x8>; interrupt-parent = <&ipic>; dfsrr; + + dtt@48 { + compatible = "national,lm75"; + reg = <0x48>; + }; + + at24@50 { + compatible = "at24,24c256"; + reg = <0x50>; + }; + rtc@68 { compatible = "dallas,ds1339"; reg = <0x68>; @@ -288,6 +317,15 @@ fsl,descriptor-types-mask = <0x3ab0ebf>; }; + sdhci@2e000 { + compatible = "fsl,mpc8379-esdhc"; + reg = <0x2e000 0x1000>; + interrupts = <42 0x8>; + interrupt-parent = <&ipic>; + /* Filled in by U-Boot */ + clock-frequency = <0>; + }; + sata@18000 { compatible = "fsl,mpc8379-sata", "fsl,pq-sata"; reg = <0x18000 0x1000>; diff --git a/arch/powerpc/boot/dts/pcm030.dts b/arch/powerpc/boot/dts/pcm030.dts index be2c11ca0594..895834713894 100644 --- a/arch/powerpc/boot/dts/pcm030.dts +++ b/arch/powerpc/boot/dts/pcm030.dts @@ -19,6 +19,7 @@ compatible = "phytec,pcm030"; #address-cells = <1>; #size-cells = <1>; + interrupt-parent = <&mpc5200_pic>; cpus { #address-cells = <1>; @@ -29,26 +30,26 @@ reg = <0>; d-cache-line-size = <32>; i-cache-line-size = <32>; - d-cache-size = <0x4000>; /* L1, 16K */ - i-cache-size = <0x4000>; /* L1, 16K */ - timebase-frequency = <0>; /* From Bootloader */ - bus-frequency = <0>; /* From Bootloader */ - clock-frequency = <0>; /* From Bootloader */ + d-cache-size = <0x4000>; // L1, 16K + i-cache-size = <0x4000>; // L1, 16K + timebase-frequency = <0>; // from bootloader + bus-frequency = <0>; // from bootloader + clock-frequency = <0>; // from bootloader }; }; memory { device_type = "memory"; - reg = <0x00000000 0x04000000>; /* 64MB */ + reg = <0x00000000 0x04000000>; // 64MB }; soc5200@f0000000 { #address-cells = <1>; #size-cells = <1>; compatible = "fsl,mpc5200b-immr"; - ranges = <0x0 0xf0000000 0x0000c000>; - bus-frequency = <0>; /* From bootloader */ - system-frequency = <0>; /* From bootloader */ + ranges = <0 0xf0000000 0x0000c000>; + bus-frequency = <0>; // from bootloader + system-frequency = <0>; // from bootloader cdm@200 { compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm"; @@ -56,87 +57,70 @@ }; mpc5200_pic: interrupt-controller@500 { - /* 5200 interrupts are encoded into two levels; */ + // 5200 interrupts are encoded into two levels; interrupt-controller; #interrupt-cells = <3>; - device_type = "interrupt-controller"; compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic"; reg = <0x500 0x80>; }; - timer@600 { /* General Purpose Timer */ + timer@600 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - cell-index = <0>; reg = <0x600 0x10>; - interrupts = <0x1 0x9 0x0>; - interrupt-parent = <&mpc5200_pic>; + interrupts = <1 9 0>; fsl,has-wdt; }; - timer@610 { /* General Purpose Timer */ + timer@610 { // General Purpose Timer compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt"; - cell-index = <1>; reg = <0x610 0x10>; - interrupts = <0x1 0xa 0x0>; - interrupt-parent = <&mpc5200_pic>; + interrupts = <1 10 0>; }; - gpt2: timer@620 { /* General Purpose Timer in GPIO mode */ + gpt2: timer@620 { // General Purpose Timer in GPIO mode compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio"; - cell-index = <2>; reg = <0x620 0x10>; - interrupts = <0x1 0xb 0x0>; - interrupt-parent = <&mpc5200_pic>; + interrupts = <1 11 0>; gpio-controller; #gpio-cells = <2>; }; - gpt3: timer@630 { /* General Purpose Timer in GPIO mode */ + gpt3: timer@630 { // General Purpose Timer in GPIO mode compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio"; - cell-index = <3>; reg = <0x630 0x10>; - interrupts = <0x1 0xc 0x0>; - interrupt-parent = <&mpc5200_pic>; + interrupts = <1 12 0>; gpio-controller; #gpio-cells = <2>; }; - gpt4: timer@640 { /* General Purpose Timer in GPIO mode */ + gpt4: timer@640 { // General Purpose Timer in GPIO mode compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio"; - cell-index = <4>; reg = <0x640 0x10>; - interrupts = <0x1 0xd 0x0>; - interrupt-parent = <&mpc5200_pic>; + interrupts = <1 13 0>; gpio-controller; #gpio-cells = <2>; }; - gpt5: timer@650 { /* General Purpose Timer in GPIO mode */ + gpt5: timer@650 { // General Purpose Timer in GPIO mode compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio"; - cell-index = <5>; reg = <0x650 0x10>; - interrupts = <0x1 0xe 0x0>; - interrupt-parent = <&mpc5200_pic>; + interrupts = <1 14 0>; gpio-controller; #gpio-cells = <2>; }; - gpt6: timer@660 { /* General Purpose Timer in GPIO mode */ + gpt6: timer@660 { // General Purpose Timer in GPIO mode compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio"; - cell-index = <6>; reg = <0x660 0x10>; - interrupts = <0x1 0xf 0x0>; - interrupt-parent = <&mpc5200_pic>; + interrupts = <1 15 0>; gpio-controller; #gpio-cells = <2>; }; - gpt7: timer@670 { /* General Purpose Timer in GPIO mode */ + gpt7: timer@670 { // General Purpose Timer in GPIO mode compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio"; - cell-index = <7>; reg = <0x670 0x10>; - interrupts = <0x1 0x10 0x0>; - interrupt-parent = <&mpc5200_pic>; + interrupts = <1 16 0>; gpio-controller; #gpio-cells = <2>; }; @@ -144,40 +128,33 @@ rtc@800 { // Real time clock compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc"; reg = <0x800 0x100>; - interrupts = <0x1 0x5 0x0 0x1 0x6 0x0>; - interrupt-parent = <&mpc5200_pic>; + interrupts = <1 5 0 1 6 0>; }; can@900 { compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan"; - cell-index = <0>; - interrupts = <0x2 0x11 0x0>; - interrupt-parent = <&mpc5200_pic>; + interrupts = <2 17 0>; reg = <0x900 0x80>; }; can@980 { compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan"; - cell-index = <1>; - interrupts = <0x2 0x12 0x0>; - interrupt-parent = <&mpc5200_pic>; + interrupts = <2 18 0>; reg = <0x980 0x80>; }; gpio_simple: gpio@b00 { compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio"; reg = <0xb00 0x40>; - interrupts = <0x1 0x7 0x0>; - interrupt-parent = <&mpc5200_pic>; + interrupts = <1 7 0>; gpio-controller; #gpio-cells = <2>; }; - gpio_wkup: gpio-wkup@c00 { + gpio_wkup: gpio@c00 { compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup"; reg = <0xc00 0x40>; - interrupts = <0x1 0x8 0x0 0x0 0x3 0x0>; - interrupt-parent = <&mpc5200_pic>; + interrupts = <1 8 0 0 3 0>; gpio-controller; #gpio-cells = <2>; }; @@ -185,26 +162,22 @@ spi@f00 { compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi"; reg = <0xf00 0x20>; - interrupts = <0x2 0xd 0x0 0x2 0xe 0x0>; - interrupt-parent = <&mpc5200_pic>; + interrupts = <2 13 0 2 14 0>; }; usb@1000 { compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be"; reg = <0x1000 0xff>; - interrupts = <0x2 0x6 0x0>; - interrupt-parent = <&mpc5200_pic>; + interrupts = <2 6 0>; }; dma-controller@1200 { - device_type = "dma-controller"; compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm"; reg = <0x1200 0x80>; - interrupts = <0x3 0x0 0x0 0x3 0x1 0x0 0x3 0x2 0x0 0x3 0x3 0x0 - 0x3 0x4 0x0 0x3 0x5 0x0 0x3 0x6 0x0 0x3 0x7 0x0 - 0x3 0x8 0x0 0x3 0x9 0x0 0x3 0xa 0x0 0x3 0xb 0x0 - 0x3 0xc 0x0 0x3 0xd 0x0 0x3 0xe 0x0 0x3 0xf 0x0>; - interrupt-parent = <&mpc5200_pic>; + interrupts = <3 0 0 3 1 0 3 2 0 3 3 0 + 3 4 0 3 5 0 3 6 0 3 7 0 + 3 8 0 3 9 0 3 10 0 3 11 0 + 3 12 0 3 13 0 3 14 0 3 15 0>; }; xlb@1f00 { @@ -213,24 +186,19 @@ }; ac97@2000 { /* PSC1 in ac97 mode */ - device_type = "sound"; compatible = "mpc5200b-psc-ac97","fsl,mpc5200b-psc-ac97"; cell-index = <0>; reg = <0x2000 0x100>; - interrupts = <0x2 0x2 0x0>; - interrupt-parent = <&mpc5200_pic>; + interrupts = <2 1 0>; }; /* PSC2 port is used by CAN1/2 */ serial@2400 { /* PSC3 in UART mode */ - device_type = "serial"; compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; - port-number = <0>; cell-index = <2>; reg = <0x2400 0x100>; - interrupts = <0x2 0x3 0x0>; - interrupt-parent = <&mpc5200_pic>; + interrupts = <2 3 0>; }; /* PSC4 is ??? */ @@ -238,55 +206,44 @@ /* PSC5 is ??? */ serial@2c00 { /* PSC6 in UART mode */ - device_type = "serial"; compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; - port-number = <1>; cell-index = <5>; reg = <0x2c00 0x100>; - interrupts = <0x2 0x4 0x0>; - interrupt-parent = <&mpc5200_pic>; + interrupts = <2 4 0>; }; ethernet@3000 { - device_type = "network"; compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec"; reg = <0x3000 0x400>; - local-mac-address = [00 00 00 00 00 00]; - interrupts = <0x2 0x5 0x0>; - interrupt-parent = <&mpc5200_pic>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <2 5 0>; phy-handle = <&phy0>; }; mdio@3000 { #address-cells = <1>; #size-cells = <0>; - compatible = "fsl,mpc5200b-mdio", "fsl,mpc5200-mdio"; - reg = <0x3000 0x400>; /* fec range, since we need to setup fec interrupts */ - interrupts = <0x2 0x5 0x0>; /* these are for "mii command finished", not link changes & co. */ - interrupt-parent = <&mpc5200_pic>; - - phy0:ethernet-phy@0 { - device_type = "ethernet-phy"; - reg = <0x0>; + compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio"; + reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts + interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co. + + phy0: ethernet-phy@0 { + reg = <0>; }; }; ata@3a00 { - device_type = "ata"; compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata"; reg = <0x3a00 0x100>; - interrupts = <0x2 0x7 0x0>; - interrupt-parent = <&mpc5200_pic>; + interrupts = <2 7 0>; }; i2c@3d00 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; - cell-index = <0>; reg = <0x3d00 0x40>; - interrupts = <0x2 0xf 0x0>; - interrupt-parent = <&mpc5200_pic>; + interrupts = <2 15 0>; fsl5200-clocking; }; @@ -294,10 +251,8 @@ #address-cells = <1>; #size-cells = <0>; compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; - cell-index = <1>; reg = <0x3d40 0x40>; - interrupts = <0x2 0x10 0x0>; - interrupt-parent = <&mpc5200_pic>; + interrupts = <2 16 0>; fsl5200-clocking; rtc@51 { compatible = "nxp,pcf8563"; @@ -307,7 +262,7 @@ }; sram@8000 { - compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram","sram"; + compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram"; reg = <0x8000 0x4000>; }; @@ -340,22 +295,21 @@ device_type = "pci"; compatible = "fsl,mpc5200b-pci","fsl,mpc5200-pci"; reg = <0xf0000d00 0x100>; - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = <0xc000 0x0 0x0 0x1 &mpc5200_pic 0x0 0x0 0x3 /* 1st slot */ - 0xc000 0x0 0x0 0x2 &mpc5200_pic 0x1 0x1 0x3 - 0xc000 0x0 0x0 0x3 &mpc5200_pic 0x1 0x2 0x3 - 0xc000 0x0 0x0 0x4 &mpc5200_pic 0x1 0x3 0x3 - - 0xc800 0x0 0x0 0x1 &mpc5200_pic 0x1 0x1 0x3 /* 2nd slot */ - 0xc800 0x0 0x0 0x2 &mpc5200_pic 0x1 0x2 0x3 - 0xc800 0x0 0x0 0x3 &mpc5200_pic 0x1 0x3 0x3 - 0xc800 0x0 0x0 0x4 &mpc5200_pic 0x0 0x0 0x3>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3 // 1st slot + 0xc000 0 0 2 &mpc5200_pic 1 1 3 + 0xc000 0 0 3 &mpc5200_pic 1 2 3 + 0xc000 0 0 4 &mpc5200_pic 1 3 3 + + 0xc800 0 0 1 &mpc5200_pic 1 1 3 // 2nd slot + 0xc800 0 0 2 &mpc5200_pic 1 2 3 + 0xc800 0 0 3 &mpc5200_pic 1 3 3 + 0xc800 0 0 4 &mpc5200_pic 0 0 3>; clock-frequency = <0>; // From boot loader - interrupts = <0x2 0x8 0x0 0x2 0x9 0x0 0x2 0xa 0x0>; - interrupt-parent = <&mpc5200_pic>; + interrupts = <2 8 0 2 9 0 2 10 0>; bus-range = <0 0>; - ranges = <0x42000000 0x0 0x80000000 0x80000000 0x0 0x20000000 - 0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000 - 0x01000000 0x0 0x00000000 0xb0000000 0x0 0x01000000>; + ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000 + 0x02000000 0 0xa0000000 0xa0000000 0 0x10000000 + 0x01000000 0 0x00000000 0xb0000000 0 0x01000000>; }; }; diff --git a/arch/powerpc/boot/dts/tqm5200.dts b/arch/powerpc/boot/dts/tqm5200.dts index 906302e26a62..c9590b58b7b0 100644 --- a/arch/powerpc/boot/dts/tqm5200.dts +++ b/arch/powerpc/boot/dts/tqm5200.dts @@ -17,6 +17,7 @@ compatible = "tqc,tqm5200"; #address-cells = <1>; #size-cells = <1>; + interrupt-parent = <&mpc5200_pic>; cpus { #address-cells = <1>; @@ -66,36 +67,33 @@ compatible = "fsl,mpc5200-gpt"; reg = <0x600 0x10>; interrupts = <1 9 0>; - interrupt-parent = <&mpc5200_pic>; fsl,has-wdt; }; can@900 { compatible = "fsl,mpc5200-mscan"; interrupts = <2 17 0>; - interrupt-parent = <&mpc5200_pic>; reg = <0x900 0x80>; }; can@980 { compatible = "fsl,mpc5200-mscan"; interrupts = <2 18 0>; - interrupt-parent = <&mpc5200_pic>; reg = <0x980 0x80>; }; - gpio@b00 { + gpio_simple: gpio@b00 { compatible = "fsl,mpc5200-gpio"; reg = <0xb00 0x40>; interrupts = <1 7 0>; - interrupt-parent = <&mpc5200_pic>; + gpio-controller; + #gpio-cells = <2>; }; usb@1000 { compatible = "fsl,mpc5200-ohci","ohci-be"; reg = <0x1000 0xff>; interrupts = <2 6 0>; - interrupt-parent = <&mpc5200_pic>; }; dma-controller@1200 { @@ -105,7 +103,6 @@ 3 4 0 3 5 0 3 6 0 3 7 0 3 8 0 3 9 0 3 10 0 3 11 0 3 12 0 3 13 0 3 14 0 3 15 0>; - interrupt-parent = <&mpc5200_pic>; }; xlb@1f00 { @@ -114,39 +111,28 @@ }; serial@2000 { // PSC1 - device_type = "serial"; compatible = "fsl,mpc5200-psc-uart"; - port-number = <0>; // Logical port assignment reg = <0x2000 0x100>; interrupts = <2 1 0>; - interrupt-parent = <&mpc5200_pic>; }; serial@2200 { // PSC2 - device_type = "serial"; compatible = "fsl,mpc5200-psc-uart"; - port-number = <1>; // Logical port assignment reg = <0x2200 0x100>; interrupts = <2 2 0>; - interrupt-parent = <&mpc5200_pic>; }; serial@2400 { // PSC3 - device_type = "serial"; compatible = "fsl,mpc5200-psc-uart"; - port-number = <2>; // Logical port assignment reg = <0x2400 0x100>; interrupts = <2 3 0>; - interrupt-parent = <&mpc5200_pic>; }; ethernet@3000 { - device_type = "network"; compatible = "fsl,mpc5200-fec"; reg = <0x3000 0x400>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <2 5 0>; - interrupt-parent = <&mpc5200_pic>; phy-handle = <&phy0>; }; @@ -156,10 +142,8 @@ compatible = "fsl,mpc5200-mdio"; reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co. - interrupt-parent = <&mpc5200_pic>; phy0: ethernet-phy@0 { - device_type = "ethernet-phy"; reg = <0>; }; }; @@ -168,7 +152,6 @@ compatible = "fsl,mpc5200-ata"; reg = <0x3a00 0x100>; interrupts = <2 7 0>; - interrupt-parent = <&mpc5200_pic>; }; i2c@3d40 { @@ -177,7 +160,6 @@ compatible = "fsl,mpc5200-i2c","fsl-i2c"; reg = <0x3d40 0x40>; interrupts = <2 16 0>; - interrupt-parent = <&mpc5200_pic>; fsl5200-clocking; rtc@68 { @@ -192,9 +174,8 @@ }; }; - lpb { - model = "fsl,lpb"; - compatible = "fsl,lpb"; + localbus { + compatible = "fsl,mpc5200-lpb","simple-bus"; #address-cells = <2>; #size-cells = <1>; ranges = <0 0 0xfc000000 0x02000000>; @@ -223,7 +204,6 @@ 0xc000 0 0 4 &mpc5200_pic 0 0 3>; clock-frequency = <0>; // From boot loader interrupts = <2 8 0 2 9 0 2 10 0>; - interrupt-parent = <&mpc5200_pic>; bus-range = <0 0>; ranges = <0x42000000 0 0x80000000 0x80000000 0 0x10000000 0x02000000 0 0x90000000 0x90000000 0 0x10000000 diff --git a/arch/powerpc/boot/dts/tqm8540.dts b/arch/powerpc/boot/dts/tqm8540.dts index a693f01c21aa..39e55ab82b89 100644 --- a/arch/powerpc/boot/dts/tqm8540.dts +++ b/arch/powerpc/boot/dts/tqm8540.dts @@ -84,6 +84,11 @@ interrupt-parent = <&mpic>; dfsrr; + dtt@50 { + compatible = "national,lm75"; + reg = <0x50>; + }; + rtc@68 { compatible = "dallas,ds1337"; reg = <0x68>; diff --git a/arch/powerpc/boot/dts/tqm8541.dts b/arch/powerpc/boot/dts/tqm8541.dts index 9e3f5f0dde20..58ae8bc58817 100644 --- a/arch/powerpc/boot/dts/tqm8541.dts +++ b/arch/powerpc/boot/dts/tqm8541.dts @@ -83,6 +83,11 @@ interrupt-parent = <&mpic>; dfsrr; + dtt@50 { + compatible = "national,lm75"; + reg = <0x50>; + }; + rtc@68 { compatible = "dallas,ds1337"; reg = <0x68>; diff --git a/arch/powerpc/boot/dts/tqm8548-bigflash.dts b/arch/powerpc/boot/dts/tqm8548-bigflash.dts index 15086eb65c50..bff380a25aa6 100644 --- a/arch/powerpc/boot/dts/tqm8548-bigflash.dts +++ b/arch/powerpc/boot/dts/tqm8548-bigflash.dts @@ -85,6 +85,11 @@ interrupt-parent = <&mpic>; dfsrr; + dtt@50 { + compatible = "national,lm75"; + reg = <0x50>; + }; + rtc@68 { compatible = "dallas,ds1337"; reg = <0x68>; @@ -365,14 +370,14 @@ can0@2,0 { compatible = "intel,82527"; // Bosch CC770 reg = <2 0x0 0x100>; - interrupts = <4 0>; + interrupts = <4 1>; interrupt-parent = <&mpic>; }; can1@2,100 { compatible = "intel,82527"; // Bosch CC770 reg = <2 0x100 0x100>; - interrupts = <4 0>; + interrupts = <4 1>; interrupt-parent = <&mpic>; }; diff --git a/arch/powerpc/boot/dts/tqm8548.dts b/arch/powerpc/boot/dts/tqm8548.dts index b7b65f5e79b6..112ac90f2ea7 100644 --- a/arch/powerpc/boot/dts/tqm8548.dts +++ b/arch/powerpc/boot/dts/tqm8548.dts @@ -85,6 +85,11 @@ interrupt-parent = <&mpic>; dfsrr; + dtt@50 { + compatible = "national,lm75"; + reg = <0x50>; + }; + rtc@68 { compatible = "dallas,ds1337"; reg = <0x68>; @@ -365,14 +370,14 @@ can0@2,0 { compatible = "intel,82527"; // Bosch CC770 reg = <2 0x0 0x100>; - interrupts = <4 0>; + interrupts = <4 1>; interrupt-parent = <&mpic>; }; can1@2,100 { compatible = "intel,82527"; // Bosch CC770 reg = <2 0x100 0x100>; - interrupts = <4 0>; + interrupts = <4 1>; interrupt-parent = <&mpic>; }; diff --git a/arch/powerpc/boot/dts/tqm8555.dts b/arch/powerpc/boot/dts/tqm8555.dts index cf92b4e7945e..4b7da890c03b 100644 --- a/arch/powerpc/boot/dts/tqm8555.dts +++ b/arch/powerpc/boot/dts/tqm8555.dts @@ -83,6 +83,11 @@ interrupt-parent = <&mpic>; dfsrr; + dtt@50 { + compatible = "national,lm75"; + reg = <0x50>; + }; + rtc@68 { compatible = "dallas,ds1337"; reg = <0x68>; diff --git a/arch/powerpc/boot/dts/tqm8560.dts b/arch/powerpc/boot/dts/tqm8560.dts index 9e1ab2d2f669..3fa552f31edb 100644 --- a/arch/powerpc/boot/dts/tqm8560.dts +++ b/arch/powerpc/boot/dts/tqm8560.dts @@ -85,6 +85,11 @@ interrupt-parent = <&mpic>; dfsrr; + dtt@50 { + compatible = "national,lm75"; + reg = <0x50>; + }; + rtc@68 { compatible = "dallas,ds1337"; reg = <0x68>; @@ -335,14 +340,14 @@ can0@2,0 { compatible = "intel,82527"; // Bosch CC770 reg = <2 0x0 0x100>; - interrupts = <4 0>; + interrupts = <4 1>; interrupt-parent = <&mpic>; }; can1@2,100 { compatible = "intel,82527"; // Bosch CC770 reg = <2 0x100 0x100>; - interrupts = <4 0>; + interrupts = <4 1>; interrupt-parent = <&mpic>; }; }; diff --git a/arch/powerpc/boot/serial.c b/arch/powerpc/boot/serial.c index 8b3607cb53fb..f2156f07571f 100644 --- a/arch/powerpc/boot/serial.c +++ b/arch/powerpc/boot/serial.c @@ -117,7 +117,8 @@ int serial_console_init(void) if (devp == NULL) goto err_out; - if (dt_is_compatible(devp, "ns16550")) + if (dt_is_compatible(devp, "ns16550") || + dt_is_compatible(devp, "pnpPNP,501")) rc = ns16550_console_init(devp, &serial_cd); else if (dt_is_compatible(devp, "marvell,mv64360-mpsc")) rc = mpsc_console_init(devp, &serial_cd); diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper index 965c237c122d..6170bbf339a3 100755 --- a/arch/powerpc/boot/wrapper +++ b/arch/powerpc/boot/wrapper @@ -186,6 +186,9 @@ cuboot*) *-mpc85*|*-tqm85*|*-sbc85*) platformo=$object/cuboot-85xx.o ;; + *-amigaone) + link_address='0x800000' + ;; esac ;; ps3) diff --git a/arch/powerpc/configs/86xx/gef_sbc310_defconfig b/arch/powerpc/configs/86xx/gef_sbc310_defconfig new file mode 100644 index 000000000000..bd236b3d915a --- /dev/null +++ b/arch/powerpc/configs/86xx/gef_sbc310_defconfig @@ -0,0 +1,1613 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.29-rc3 +# Wed Jan 28 23:05:34 2009 +# +# CONFIG_PPC64 is not set + +# +# Processor support +# +CONFIG_6xx=y +# CONFIG_PPC_85xx is not set +# CONFIG_PPC_8xx is not set +# CONFIG_40x is not set +# CONFIG_44x is not set +# CONFIG_E200 is not set +CONFIG_PPC_FPU=y +# CONFIG_PHYS_64BIT is not set +CONFIG_ALTIVEC=y +CONFIG_PPC_STD_MMU=y +CONFIG_PPC_STD_MMU_32=y +# CONFIG_PPC_MM_SLICES is not set +CONFIG_SMP=y +CONFIG_NR_CPUS=2 +CONFIG_PPC32=y +CONFIG_WORD_SIZE=32 +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set +CONFIG_MMU=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_TIME_VSYSCALL=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_GENERIC_LOCKBREAK=y +CONFIG_ARCH_HAS_ILOG2_U32=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_GPIO=y +# CONFIG_ARCH_NO_VIRT_TO_BUS is not set +CONFIG_PPC=y +CONFIG_EARLY_PRINTK=y +CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_PPC_OF=y +CONFIG_OF=y +CONFIG_PPC_UDBG_16550=y +CONFIG_GENERIC_TBSYNC=y +CONFIG_AUDIT_ARCH=y +CONFIG_GENERIC_BUG=y +CONFIG_DEFAULT_UIMAGE=y +# CONFIG_PPC_DCR_NATIVE is not set +# CONFIG_PPC_DCR_MMIO is not set +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +CONFIG_BSD_PROCESS_ACCT=y +CONFIG_BSD_PROCESS_ACCT_V3=y +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_RELAY=y +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_USE_GENERIC_SMP_HELPERS=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_STOP_MACHINE=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_FREEZER is not set +CONFIG_PPC_MSI_BITMAP=y + +# +# Platform support +# +CONFIG_PPC_MULTIPLATFORM=y +CONFIG_CLASSIC32=y +# CONFIG_PPC_CHRP is not set +# CONFIG_MPC5121_ADS is not set +# CONFIG_MPC5121_GENERIC is not set +# CONFIG_PPC_MPC52xx is not set +# CONFIG_PPC_PMAC is not set +# CONFIG_PPC_CELL is not set +# CONFIG_PPC_CELL_NATIVE is not set +# CONFIG_PPC_82xx is not set +# CONFIG_PQ2ADS is not set +# CONFIG_PPC_83xx is not set +CONFIG_PPC_86xx=y +# CONFIG_MPC8641_HPCN is not set +# CONFIG_SBC8641D is not set +# CONFIG_MPC8610_HPCD is not set +CONFIG_GEF_SBC310=y +# CONFIG_GEF_SBC610 is not set +CONFIG_MPC8641=y +# CONFIG_IPIC is not set +CONFIG_MPIC=y +# CONFIG_MPIC_WEIRD is not set +# CONFIG_PPC_I8259 is not set +# CONFIG_PPC_RTAS is not set +# CONFIG_MMIO_NVRAM is not set +# CONFIG_PPC_MPC106 is not set +# CONFIG_PPC_970_NAP is not set +# CONFIG_PPC_INDIRECT_IO is not set +# CONFIG_GENERIC_IOMAP is not set +# CONFIG_CPU_FREQ is not set +# CONFIG_TAU is not set +# CONFIG_QUICC_ENGINE is not set +# CONFIG_FSL_ULI1575 is not set +# CONFIG_MPC8xxx_GPIO is not set +# CONFIG_SIMPLE_GPIO is not set + +# +# Kernel options +# +# CONFIG_HIGHMEM is not set +CONFIG_TICK_ONESHOT=y +# CONFIG_NO_HZ is not set +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +# CONFIG_HZ_100 is not set +# CONFIG_HZ_250 is not set +# CONFIG_HZ_300 is not set +CONFIG_HZ_1000=y +CONFIG_HZ=1000 +CONFIG_SCHED_HRTICK=y +# CONFIG_PREEMPT_NONE is not set +# CONFIG_PREEMPT_VOLUNTARY is not set +CONFIG_PREEMPT=y +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set +CONFIG_BINFMT_MISC=y +# CONFIG_IOMMU_HELPER is not set +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_HAS_WALK_MEMORY=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +# CONFIG_KEXEC is not set +# CONFIG_CRASH_DUMP is not set +CONFIG_IRQ_ALL_CPUS=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set +CONFIG_FORCE_MAX_ZONEORDER=11 +# CONFIG_PROC_DEVICETREE is not set +# CONFIG_CMDLINE_BOOL is not set +CONFIG_EXTRA_TARGETS="" +# CONFIG_PM is not set +CONFIG_SECCOMP=y +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +CONFIG_ZONE_DMA=y +CONFIG_GENERIC_ISA_DMA=y +CONFIG_PPC_INDIRECT_PCI=y +CONFIG_FSL_SOC=y +CONFIG_FSL_PCI=y +CONFIG_PPC_PCI_CHOICE=y +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +CONFIG_PCI_SYSCALL=y +CONFIG_PCIEPORTBUS=y +CONFIG_PCIEAER=y +# CONFIG_PCIEASPM is not set +CONFIG_ARCH_SUPPORTS_MSI=y +CONFIG_PCI_MSI=y +# CONFIG_PCI_LEGACY is not set +# CONFIG_PCI_STUB is not set +# CONFIG_PCCARD is not set +# CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set + +# +# Advanced setup +# +# CONFIG_ADVANCED_OPTIONS is not set + +# +# Default settings for advanced configuration options are used +# +CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_LOWMEM_CAM_NUM=3 +CONFIG_PAGE_OFFSET=0xc0000000 +CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 +CONFIG_TASK_SIZE=0xc0000000 +CONFIG_NET=y + +# +# Networking options +# +CONFIG_COMPAT_NET_DEV_OPS=y +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +CONFIG_XFRM=y +CONFIG_XFRM_USER=m +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +CONFIG_XFRM_IPCOMP=m +CONFIG_NET_KEY=m +# CONFIG_NET_KEY_MIGRATE is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_ASK_IP_FIB_HASH=y +# CONFIG_IP_FIB_TRIE is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_MULTIPLE_TABLES=y +CONFIG_IP_ROUTE_MULTIPATH=y +CONFIG_IP_ROUTE_VERBOSE=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +CONFIG_NET_IPIP=m +CONFIG_NET_IPGRE=m +CONFIG_NET_IPGRE_BROADCAST=y +CONFIG_IP_MROUTE=y +CONFIG_IP_PIMSM_V1=y +CONFIG_IP_PIMSM_V2=y +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +CONFIG_INET_AH=m +CONFIG_INET_ESP=m +CONFIG_INET_IPCOMP=m +CONFIG_INET_XFRM_TUNNEL=m +CONFIG_INET_TUNNEL=m +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +# CONFIG_INET_XFRM_MODE_BEET is not set +CONFIG_INET_LRO=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +CONFIG_IPV6=m +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_IPV6_OPTIMISTIC_DAD is not set +CONFIG_INET6_AH=m +CONFIG_INET6_ESP=m +CONFIG_INET6_IPCOMP=m +# CONFIG_IPV6_MIP6 is not set +CONFIG_INET6_XFRM_TUNNEL=m +CONFIG_INET6_TUNNEL=m +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set +CONFIG_IPV6_SIT=m +CONFIG_IPV6_NDISC_NODETYPE=y +CONFIG_IPV6_TUNNEL=m +# CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_IPV6_MROUTE is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set + +# +# Network testing +# +CONFIG_NET_PKTGEN=m +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_PHONET is not set +CONFIG_FIB_RULES=y +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +CONFIG_MTD_OF_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +CONFIG_MTD_JEDECPROBE=y +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_CFI_INTELEXT=y +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PHYSMAP is not set +CONFIG_MTD_PHYSMAP_OF=y +# CONFIG_MTD_INTEL_VR_NOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set +# CONFIG_MTD_QINFO_PROBE is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +CONFIG_OF_DEVICE=y +CONFIG_OF_GPIO=y +CONFIG_OF_I2C=y +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=m +CONFIG_BLK_DEV_CRYPTOLOOP=m +CONFIG_BLK_DEV_NBD=m +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=131072 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set +CONFIG_MISC_DEVICES=y +# CONFIG_PHANTOM is not set +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set +# CONFIG_ICS932S401 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +CONFIG_CHR_DEV_ST=y +# CONFIG_CHR_DEV_OSST is not set +CONFIG_BLK_DEV_SR=y +# CONFIG_BLK_DEV_SR_VENDOR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_SCSI_ADVANSYS is not set +# CONFIG_SCSI_ARCMSR is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_HPTIOP is not set +# CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_LIBFC is not set +# CONFIG_FCOE is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_EATA is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_GDTH is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_MVSAS is not set +# CONFIG_SCSI_STEX is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_IPR is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +# CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_QLA_ISCSI is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_NSP32 is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_DH is not set +CONFIG_ATA=y +# CONFIG_ATA_NONSTANDARD is not set +CONFIG_SATA_PMP=y +# CONFIG_SATA_AHCI is not set +CONFIG_SATA_SIL24=y +# CONFIG_SATA_FSL is not set +# CONFIG_ATA_SFF is not set +# CONFIG_MD is not set +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# Enable only one of the two stacks, unless you know what you are doing +# +# CONFIG_FIREWIRE is not set +# CONFIG_IEEE1394 is not set +# CONFIG_I2O is not set +# CONFIG_MACINTOSH_DRIVERS is not set +CONFIG_NETDEVICES=y +CONFIG_DUMMY=m +CONFIG_BONDING=m +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +CONFIG_TUN=m +# CONFIG_VETH is not set +# CONFIG_ARCNET is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_NET_PCI is not set +# CONFIG_B44 is not set +# CONFIG_ATL2 is not set +CONFIG_NETDEV_1000=y +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_E1000E is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set +CONFIG_GIANFAR=y +# CONFIG_MV643XX_ETH is not set +# CONFIG_QLA3XXX is not set +# CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set +# CONFIG_JME is not set +# CONFIG_NETDEV_10000 is not set +# CONFIG_TR is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +CONFIG_PPP=m +CONFIG_PPP_MULTILINK=y +CONFIG_PPP_FILTER=y +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_BSDCOMP=m +# CONFIG_PPP_MPPE is not set +CONFIG_PPPOE=m +# CONFIG_PPPOL2TP is not set +CONFIG_SLIP=m +CONFIG_SLIP_COMPRESSED=y +CONFIG_SLHC=m +CONFIG_SLIP_SMART=y +CONFIG_SLIP_MODE_SLIP6=y +# CONFIG_NET_FC is not set +CONFIG_NETCONSOLE=y +# CONFIG_NETCONSOLE_DYNAMIC is not set +CONFIG_NETPOLL=y +CONFIG_NETPOLL_TRAP=y +CONFIG_NET_POLL_CONTROLLER=y +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +# CONFIG_SERIAL_8250_PCI is not set +CONFIG_SERIAL_8250_NR_UARTS=2 +CONFIG_SERIAL_8250_RUNTIME_UARTS=2 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_UARTLITE is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +# CONFIG_SERIAL_OF_PLATFORM is not set +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_HVC_UDBG is not set +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +CONFIG_NVRAM=y +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_DEVPORT=y +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y + +# +# I2C Hardware Bus support +# + +# +# PC SMBus host controller drivers +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_ISCH is not set +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_GPIO is not set +CONFIG_I2C_MPC=y +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Graphics adapter I2C/DDC channel drivers +# +# CONFIG_I2C_VOODOO3 is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +CONFIG_DS1682=y +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +# CONFIG_SPI is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +CONFIG_GPIO_SYSFS=y + +# +# Memory mapped GPIO expanders: +# +# CONFIG_GPIO_XILINX is not set + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set + +# +# PCI GPIO expanders: +# +# CONFIG_GPIO_BT8XX is not set + +# +# SPI GPIO expanders: +# +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_AD7414 is not set +# CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7462 is not set +# CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ADT7475 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_I5K_AMB is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +CONFIG_SENSORS_LM90=y +CONFIG_SENSORS_LM92=y +# CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX6650 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SIS5595 is not set +# CONFIG_SENSORS_DME1737 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_VIA686A is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_VT8231 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83L786NG is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +# CONFIG_ALIM7101_WDT is not set +CONFIG_GEF_WDT=y +# CONFIG_8xxx_WDT is not set + +# +# PCI-based Watchdog Cards +# +# CONFIG_PCIPCWATCHDOG is not set +# CONFIG_WDTPCI is not set + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set +# CONFIG_REGULATOR is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# +CONFIG_DAB=y +# CONFIG_USB_DABUSB is not set + +# +# Graphics support +# +# CONFIG_AGP is not set +# CONFIG_DRM is not set +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +CONFIG_VGA_CONSOLE=y +# CONFIG_VGACON_SOFT_SCROLLBACK is not set +CONFIG_DUMMY_CONSOLE=y +# CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_HID_PID is not set +# CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y +CONFIG_HID_A4TECH=y +CONFIG_HID_APPLE=y +CONFIG_HID_BELKIN=y +CONFIG_HID_CHERRY=y +CONFIG_HID_CHICONY=y +CONFIG_HID_CYPRESS=y +CONFIG_HID_EZKEY=y +CONFIG_HID_GYRATION=y +CONFIG_HID_LOGITECH=y +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +CONFIG_HID_MICROSOFT=y +CONFIG_HID_MONTEREY=y +# CONFIG_HID_NTRIG is not set +CONFIG_HID_PANTHERLORD=y +# CONFIG_PANTHERLORD_FF is not set +CONFIG_HID_PETALYNX=y +CONFIG_HID_SAMSUNG=y +CONFIG_HID_SONY=y +CONFIG_HID_SUNPLUS=y +# CONFIG_GREENASIA_FF is not set +# CONFIG_HID_TOPSEED is not set +# CONFIG_THRUSTMASTER_FF is not set +# CONFIG_ZEROPLUS_FF is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set + +# +# Miscellaneous USB options +# +# CONFIG_USB_DEVICEFS is not set +# CONFIG_USB_DEVICE_CLASS is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +# CONFIG_USB_MON is not set +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +CONFIG_USB_EHCI_HCD=y +# CONFIG_USB_EHCI_ROOT_HUB_TT is not set +# CONFIG_USB_EHCI_TT_NEWSCHED is not set +# CONFIG_USB_EHCI_FSL is not set +# CONFIG_USB_EHCI_HCD_PPC_OF is not set +# CONFIG_USB_OXU210HP_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_HCD_PPC_OF is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_UHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# + +# +# see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +# CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_UWB is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_INFINIBAND is not set +# CONFIG_EDAC is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +# CONFIG_RTC_INTF_PROC is not set +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +CONFIG_RTC_DRV_RX8581=y + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +# CONFIG_RTC_DRV_PPC is not set +# CONFIG_DMADEVICES is not set +# CONFIG_UIO is not set +# CONFIG_STAGING is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT2_FS_POSIX_ACL=y +# CONFIG_EXT2_FS_SECURITY is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +CONFIG_EXT3_FS_POSIX_ACL=y +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4_FS is not set +CONFIG_JBD=y +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +CONFIG_FILE_LOCKING=y +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=y +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +CONFIG_UDF_FS=y +CONFIG_UDF_NLS=y + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=850 +CONFIG_FAT_DEFAULT_IOCHARSET="ascii" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_REGISTER_V4 is not set +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +CONFIG_CIFS=m +# CONFIG_CIFS_STATS is not set +# CONFIG_CIFS_WEAK_PW_HASH is not set +CONFIG_CIFS_XATTR=y +CONFIG_CIFS_POSIX=y +# CONFIG_CIFS_DEBUG2 is not set +# CONFIG_CIFS_EXPERIMENTAL is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=m +CONFIG_NLS_CODEPAGE_737=m +CONFIG_NLS_CODEPAGE_775=m +CONFIG_NLS_CODEPAGE_850=m +CONFIG_NLS_CODEPAGE_852=m +CONFIG_NLS_CODEPAGE_855=m +CONFIG_NLS_CODEPAGE_857=m +CONFIG_NLS_CODEPAGE_860=m +CONFIG_NLS_CODEPAGE_861=m +CONFIG_NLS_CODEPAGE_862=m +CONFIG_NLS_CODEPAGE_863=m +CONFIG_NLS_CODEPAGE_864=m +CONFIG_NLS_CODEPAGE_865=m +CONFIG_NLS_CODEPAGE_866=m +CONFIG_NLS_CODEPAGE_869=m +CONFIG_NLS_CODEPAGE_936=m +CONFIG_NLS_CODEPAGE_950=m +CONFIG_NLS_CODEPAGE_932=m +CONFIG_NLS_CODEPAGE_949=m +CONFIG_NLS_CODEPAGE_874=m +CONFIG_NLS_ISO8859_8=m +CONFIG_NLS_CODEPAGE_1250=m +CONFIG_NLS_CODEPAGE_1251=m +CONFIG_NLS_ASCII=m +CONFIG_NLS_ISO8859_1=m +CONFIG_NLS_ISO8859_2=m +CONFIG_NLS_ISO8859_3=m +CONFIG_NLS_ISO8859_4=m +CONFIG_NLS_ISO8859_5=m +CONFIG_NLS_ISO8859_6=m +CONFIG_NLS_ISO8859_7=m +CONFIG_NLS_ISO8859_9=m +CONFIG_NLS_ISO8859_13=m +CONFIG_NLS_ISO8859_14=m +CONFIG_NLS_ISO8859_15=m +CONFIG_NLS_KOI8_R=m +CONFIG_NLS_KOI8_U=m +CONFIG_NLS_UTF8=m +# CONFIG_DLM is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +CONFIG_CRC_CCITT=y +# CONFIG_CRC16 is not set +CONFIG_CRC_T10DIF=y +CONFIG_CRC_ITU_T=y +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +CONFIG_LIBCRC32C=y +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y + +# +# Tracers +# +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +CONFIG_PRINT_STACK_DEPTH=64 +# CONFIG_IRQSTACKS is not set +# CONFIG_BOOTX_TEXT is not set +# CONFIG_PPC_EARLY_DEBUG is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +CONFIG_CRYPTO_AUTHENC=m +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +CONFIG_CRYPTO_HMAC=m +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +CONFIG_CRYPTO_CRC32C=y +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +CONFIG_CRYPTO_SHA1=m +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +CONFIG_CRYPTO_DEFLATE=m +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +# CONFIG_CRYPTO_HW is not set +# CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/amigaone_defconfig b/arch/powerpc/configs/amigaone_defconfig new file mode 100644 index 000000000000..b63cc38df6b1 --- /dev/null +++ b/arch/powerpc/configs/amigaone_defconfig @@ -0,0 +1,1636 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.29-rc3 +# Sun Feb 1 14:22:42 2009 +# +# CONFIG_PPC64 is not set + +# +# Processor support +# +CONFIG_6xx=y +# CONFIG_PPC_85xx is not set +# CONFIG_PPC_8xx is not set +# CONFIG_40x is not set +# CONFIG_44x is not set +# CONFIG_E200 is not set +CONFIG_PPC_FPU=y +CONFIG_ALTIVEC=y +CONFIG_PPC_STD_MMU=y +CONFIG_PPC_STD_MMU_32=y +# CONFIG_PPC_MM_SLICES is not set +# CONFIG_SMP is not set +CONFIG_NOT_COHERENT_CACHE=y +CONFIG_CHECK_CACHE_COHERENCY=y +CONFIG_PPC32=y +CONFIG_WORD_SIZE=32 +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set +CONFIG_MMU=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_TIME_VSYSCALL=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_ARCH_HAS_ILOG2_U32=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +# CONFIG_ARCH_NO_VIRT_TO_BUS is not set +CONFIG_PPC=y +CONFIG_EARLY_PRINTK=y +CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_PPC_OF=y +CONFIG_OF=y +CONFIG_PPC_UDBG_16550=y +# CONFIG_GENERIC_TBSYNC is not set +CONFIG_AUDIT_ARCH=y +CONFIG_GENERIC_BUG=y +CONFIG_DEFAULT_UIMAGE=y +# CONFIG_PPC_DCR_NATIVE is not set +# CONFIG_PPC_DCR_MMIO is not set +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=15 +# CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +# CONFIG_EMBEDDED is not set +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_PCSPKR_PLATFORM=y +# CONFIG_COMPAT_BRK is not set +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y +CONFIG_SLUB_DEBUG=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_BLOCK=y +CONFIG_LBD=y +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +# CONFIG_FREEZER is not set + +# +# Platform support +# +CONFIG_PPC_MULTIPLATFORM=y +CONFIG_CLASSIC32=y +# CONFIG_PPC_CHRP is not set +# CONFIG_MPC5121_ADS is not set +# CONFIG_MPC5121_GENERIC is not set +# CONFIG_PPC_MPC52xx is not set +# CONFIG_PPC_PMAC is not set +# CONFIG_PPC_CELL is not set +# CONFIG_PPC_CELL_NATIVE is not set +# CONFIG_PPC_82xx is not set +# CONFIG_PQ2ADS is not set +# CONFIG_PPC_83xx is not set +# CONFIG_PPC_86xx is not set +# CONFIG_EMBEDDED6xx is not set +CONFIG_AMIGAONE=y +# CONFIG_IPIC is not set +# CONFIG_MPIC is not set +# CONFIG_MPIC_WEIRD is not set +CONFIG_PPC_I8259=y +# CONFIG_PPC_RTAS is not set +# CONFIG_MMIO_NVRAM is not set +# CONFIG_PPC_MPC106 is not set +# CONFIG_PPC_970_NAP is not set +# CONFIG_PPC_INDIRECT_IO is not set +# CONFIG_GENERIC_IOMAP is not set +# CONFIG_CPU_FREQ is not set +# CONFIG_TAU is not set +# CONFIG_FSL_ULI1575 is not set +# CONFIG_SIMPLE_GPIO is not set + +# +# Kernel options +# +CONFIG_HIGHMEM=y +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_SCHED_HRTICK=y +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set +CONFIG_BINFMT_MISC=y +# CONFIG_IOMMU_HELPER is not set +CONFIG_PPC_NEED_DMA_SYNC_OPS=y +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_HAS_WALK_MEMORY=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +# CONFIG_KEXEC is not set +# CONFIG_CRASH_DUMP is not set +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_MIGRATION is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set +CONFIG_FORCE_MAX_ZONEORDER=11 +CONFIG_PROC_DEVICETREE=y +# CONFIG_CMDLINE_BOOL is not set +CONFIG_EXTRA_TARGETS="" +# CONFIG_PM is not set +CONFIG_SECCOMP=y +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +CONFIG_ZONE_DMA=y +CONFIG_GENERIC_ISA_DMA=y +CONFIG_PPC_INDIRECT_PCI=y +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +CONFIG_PCI_SYSCALL=y +# CONFIG_PCIEPORTBUS is not set +CONFIG_ARCH_SUPPORTS_MSI=y +# CONFIG_PCI_MSI is not set +# CONFIG_PCI_LEGACY is not set +# CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_STUB is not set +# CONFIG_PCCARD is not set +# CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set + +# +# Advanced setup +# +# CONFIG_ADVANCED_OPTIONS is not set + +# +# Default settings for advanced configuration options are used +# +CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 +CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 +CONFIG_TASK_SIZE=0xc0000000 +CONFIG_CONSISTENT_START=0xff100000 +CONFIG_CONSISTENT_SIZE=0x00200000 +CONFIG_NET=y + +# +# Networking options +# +CONFIG_COMPAT_NET_DEV_OPS=y +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +# CONFIG_NETFILTER_ADVANCED is not set + +# +# Core Netfilter Configuration +# +CONFIG_NETFILTER_NETLINK=m +CONFIG_NETFILTER_NETLINK_LOG=m +CONFIG_NF_CONNTRACK=m +CONFIG_NF_CONNTRACK_FTP=m +CONFIG_NF_CONNTRACK_IRC=m +CONFIG_NF_CONNTRACK_SIP=m +CONFIG_NF_CT_NETLINK=m +CONFIG_NETFILTER_XTABLES=m +# CONFIG_NETFILTER_XT_TARGET_MARK is not set +# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set +# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set +# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set +# CONFIG_NETFILTER_XT_MATCH_MARK is not set +# CONFIG_NETFILTER_XT_MATCH_STATE is not set +# CONFIG_IP_VS is not set + +# +# IP: Netfilter Configuration +# +CONFIG_NF_DEFRAG_IPV4=m +CONFIG_NF_CONNTRACK_IPV4=m +CONFIG_NF_CONNTRACK_PROC_COMPAT=y +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_TARGET_LOG=m +# CONFIG_IP_NF_TARGET_ULOG is not set +CONFIG_NF_NAT=m +CONFIG_NF_NAT_NEEDED=y +CONFIG_IP_NF_TARGET_MASQUERADE=m +CONFIG_NF_NAT_FTP=m +CONFIG_NF_NAT_IRC=m +# CONFIG_NF_NAT_TFTP is not set +# CONFIG_NF_NAT_AMANDA is not set +# CONFIG_NF_NAT_PPTP is not set +# CONFIG_NF_NAT_H323 is not set +CONFIG_NF_NAT_SIP=m +# CONFIG_IP_NF_MANGLE is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_PHONET is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_STANDALONE is not set +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +# CONFIG_MTD is not set +CONFIG_OF_DEVICE=y +CONFIG_OF_I2C=y +CONFIG_PARPORT=y +CONFIG_PARPORT_PC=y +# CONFIG_PARPORT_SERIAL is not set +CONFIG_PARPORT_PC_FIFO=y +# CONFIG_PARPORT_PC_SUPERIO is not set +# CONFIG_PARPORT_GSC is not set +# CONFIG_PARPORT_AX88796 is not set +# CONFIG_PARPORT_1284 is not set +CONFIG_BLK_DEV=y +CONFIG_BLK_DEV_FD=y +# CONFIG_PARIDE is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set +CONFIG_MISC_DEVICES=y +# CONFIG_PHANTOM is not set +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set +# CONFIG_ICS932S401 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set +CONFIG_HAVE_IDE=y +CONFIG_IDE=y + +# +# Please see Documentation/ide/ide.txt for help/info on IDE drives +# +CONFIG_IDE_TIMINGS=y +CONFIG_IDE_ATAPI=y +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_IDE_GD=y +CONFIG_IDE_GD_ATA=y +# CONFIG_IDE_GD_ATAPI is not set +CONFIG_BLK_DEV_IDECD=y +CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_IDE_TASK_IOCTL is not set +CONFIG_IDE_PROC_FS=y + +# +# IDE chipset support/bugfixes +# +# CONFIG_BLK_DEV_PLATFORM is not set +CONFIG_BLK_DEV_IDEDMA_SFF=y + +# +# PCI IDE chipsets support +# +CONFIG_BLK_DEV_IDEPCI=y +# CONFIG_IDEPCI_PCIBUS_ORDER is not set +# CONFIG_BLK_DEV_OFFBOARD is not set +CONFIG_BLK_DEV_GENERIC=y +# CONFIG_BLK_DEV_OPTI621 is not set +CONFIG_BLK_DEV_IDEDMA_PCI=y +# CONFIG_BLK_DEV_AEC62XX is not set +# CONFIG_BLK_DEV_ALI15X3 is not set +# CONFIG_BLK_DEV_AMD74XX is not set +# CONFIG_BLK_DEV_CMD64X is not set +# CONFIG_BLK_DEV_TRIFLEX is not set +# CONFIG_BLK_DEV_CS5520 is not set +# CONFIG_BLK_DEV_CS5530 is not set +# CONFIG_BLK_DEV_HPT366 is not set +# CONFIG_BLK_DEV_JMICRON is not set +# CONFIG_BLK_DEV_SC1200 is not set +# CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT8172 is not set +# CONFIG_BLK_DEV_IT8213 is not set +# CONFIG_BLK_DEV_IT821X is not set +# CONFIG_BLK_DEV_NS87415 is not set +# CONFIG_BLK_DEV_PDC202XX_OLD is not set +# CONFIG_BLK_DEV_PDC202XX_NEW is not set +# CONFIG_BLK_DEV_SVWKS is not set +CONFIG_BLK_DEV_SIIMAGE=y +# CONFIG_BLK_DEV_SL82C105 is not set +# CONFIG_BLK_DEV_SLC90E66 is not set +# CONFIG_BLK_DEV_TRM290 is not set +CONFIG_BLK_DEV_VIA82CXXX=y +# CONFIG_BLK_DEV_TC86C001 is not set +CONFIG_BLK_DEV_IDEDMA=y + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +CONFIG_CHR_DEV_ST=y +# CONFIG_CHR_DEV_OSST is not set +CONFIG_BLK_DEV_SR=y +CONFIG_BLK_DEV_SR_VENDOR=y +CONFIG_CHR_DEV_SG=y +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +CONFIG_SCSI_CONSTANTS=y +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +CONFIG_SCSI_SPI_ATTRS=y +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_SCSI_ADVANSYS is not set +# CONFIG_SCSI_ARCMSR is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_HPTIOP is not set +# CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_LIBFC is not set +# CONFIG_FCOE is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_EATA is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_GDTH is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_PPA is not set +# CONFIG_SCSI_IMM is not set +# CONFIG_SCSI_MVSAS is not set +# CONFIG_SCSI_STEX is not set +CONFIG_SCSI_SYM53C8XX_2=y +CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0 +CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 +CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 +# CONFIG_SCSI_SYM53C8XX_MMIO is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +# CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_QLA_ISCSI is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_NSP32 is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_DH is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# Enable only one of the two stacks, unless you know what you are doing +# +# CONFIG_FIREWIRE is not set +# CONFIG_IEEE1394 is not set +# CONFIG_I2O is not set +# CONFIG_MACINTOSH_DRIVERS is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_ARCNET is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +CONFIG_NET_VENDOR_3COM=y +CONFIG_VORTEX=y +# CONFIG_TYPHOON is not set +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +CONFIG_NET_PCI=y +# CONFIG_PCNET32 is not set +# CONFIG_AMD8111_ETH is not set +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_B44 is not set +# CONFIG_FORCEDETH is not set +# CONFIG_E100 is not set +# CONFIG_FEALNX is not set +# CONFIG_NATSEMI is not set +# CONFIG_NE2K_PCI is not set +CONFIG_8139CP=y +CONFIG_8139TOO=y +CONFIG_8139TOO_PIO=y +# CONFIG_8139TOO_TUNE_TWISTER is not set +# CONFIG_8139TOO_8129 is not set +# CONFIG_8139_OLD_RX_RESET is not set +# CONFIG_R6040 is not set +# CONFIG_SIS900 is not set +# CONFIG_EPIC100 is not set +# CONFIG_SMSC9420 is not set +# CONFIG_SUNDANCE is not set +# CONFIG_TLAN is not set +# CONFIG_VIA_RHINE is not set +# CONFIG_SC92031 is not set +# CONFIG_NET_POCKET is not set +# CONFIG_ATL2 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set +# CONFIG_TR is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PLIP is not set +CONFIG_PPP=m +CONFIG_PPP_MULTILINK=y +CONFIG_PPP_FILTER=y +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_MPPE=m +CONFIG_PPPOE=m +# CONFIG_PPPOL2TP is not set +# CONFIG_SLIP is not set +CONFIG_SLHC=m +# CONFIG_NET_FC is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ATKBD=y +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +CONFIG_INPUT_MOUSE=y +CONFIG_MOUSE_PS2=y +CONFIG_MOUSE_PS2_ALPS=y +CONFIG_MOUSE_PS2_LOGIPS2PP=y +CONFIG_MOUSE_PS2_SYNAPTICS=y +CONFIG_MOUSE_PS2_LIFEBOOK=y +CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_ELANTECH is not set +# CONFIG_MOUSE_PS2_TOUCHKIT is not set +# CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_APPLETOUCH is not set +# CONFIG_MOUSE_BCM5974 is not set +# CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +CONFIG_INPUT_MISC=y +CONFIG_INPUT_PCSPKR=y +# CONFIG_INPUT_ATI_REMOTE is not set +# CONFIG_INPUT_ATI_REMOTE2 is not set +# CONFIG_INPUT_KEYSPAN_REMOTE is not set +# CONFIG_INPUT_POWERMATE is not set +# CONFIG_INPUT_YEALINK is not set +# CONFIG_INPUT_CM109 is not set +CONFIG_INPUT_UINPUT=y + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_I8042=y +CONFIG_SERIO_SERPORT=y +# CONFIG_SERIO_PARKBD is not set +# CONFIG_SERIO_PCIPS2 is not set +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_SERIO_XILINX_XPS_PS2 is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_PCI=y +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_UARTLITE is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +# CONFIG_SERIAL_OF_PLATFORM is not set +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_PRINTER is not set +# CONFIG_PPDEV is not set +# CONFIG_HVC_UDBG is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_DEVPORT=y +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +# CONFIG_I2C_CHARDEV is not set +CONFIG_I2C_HELPER_AUTO=y +CONFIG_I2C_ALGOBIT=y + +# +# I2C Hardware Bus support +# + +# +# PC SMBus host controller drivers +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_ISCH is not set +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_MPC is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Graphics adapter I2C/DDC channel drivers +# +# CONFIG_I2C_VOODOO3 is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +# CONFIG_SPI is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set +# CONFIG_REGULATOR is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_AGP is not set +# CONFIG_DRM is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +CONFIG_FIRMWARE_EDID=y +CONFIG_FB_DDC=y +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +CONFIG_FB_MACMODES=y +CONFIG_FB_BACKLIGHT=y +CONFIG_FB_MODE_HELPERS=y +CONFIG_FB_TILEBLITTING=y + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_CIRRUS is not set +# CONFIG_FB_PM2 is not set +# CONFIG_FB_CYBER2000 is not set +# CONFIG_FB_OF is not set +# CONFIG_FB_CT65550 is not set +# CONFIG_FB_ASILIANT is not set +# CONFIG_FB_IMSTT is not set +# CONFIG_FB_VGA16 is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_NVIDIA is not set +# CONFIG_FB_RIVA is not set +# CONFIG_FB_MATROX is not set +CONFIG_FB_RADEON=y +CONFIG_FB_RADEON_I2C=y +CONFIG_FB_RADEON_BACKLIGHT=y +# CONFIG_FB_RADEON_DEBUG is not set +# CONFIG_FB_ATY128 is not set +# CONFIG_FB_ATY is not set +# CONFIG_FB_S3 is not set +# CONFIG_FB_SAVAGE is not set +# CONFIG_FB_SIS is not set +# CONFIG_FB_VIA is not set +# CONFIG_FB_NEOMAGIC is not set +# CONFIG_FB_KYRO is not set +CONFIG_FB_3DFX=y +# CONFIG_FB_3DFX_ACCEL is not set +# CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_VT8623 is not set +# CONFIG_FB_TRIDENT is not set +# CONFIG_FB_ARK is not set +# CONFIG_FB_PM3 is not set +# CONFIG_FB_CARMINE is not set +# CONFIG_FB_IBM_GXT4500 is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_CLASS_DEVICE=m +# CONFIG_LCD_ILI9320 is not set +# CONFIG_LCD_PLATFORM is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_GENERIC=y + +# +# Display device support +# +CONFIG_DISPLAY_SUPPORT=m + +# +# Display hardware drivers +# + +# +# Console display driver support +# +CONFIG_VGA_CONSOLE=y +# CONFIG_VGACON_SOFT_SCROLLBACK is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +CONFIG_LOGO=y +CONFIG_LOGO_LINUX_MONO=y +CONFIG_LOGO_LINUX_VGA16=y +CONFIG_LOGO_LINUX_CLUT224=y +# CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_HID_PID is not set +# CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y +CONFIG_HID_A4TECH=y +CONFIG_HID_APPLE=y +CONFIG_HID_BELKIN=y +CONFIG_HID_CHERRY=y +CONFIG_HID_CHICONY=y +CONFIG_HID_CYPRESS=y +CONFIG_HID_EZKEY=y +CONFIG_HID_GYRATION=y +CONFIG_HID_LOGITECH=y +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +CONFIG_HID_MICROSOFT=y +CONFIG_HID_MONTEREY=y +CONFIG_HID_NTRIG=y +CONFIG_HID_PANTHERLORD=y +# CONFIG_PANTHERLORD_FF is not set +CONFIG_HID_PETALYNX=y +CONFIG_HID_SAMSUNG=y +CONFIG_HID_SONY=y +CONFIG_HID_SUNPLUS=y +# CONFIG_GREENASIA_FF is not set +CONFIG_HID_TOPSEED=y +# CONFIG_THRUSTMASTER_FF is not set +# CONFIG_ZEROPLUS_FF is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set +CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_EHCI_HCD is not set +# CONFIG_USB_OXU210HP_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_HCD_PPC_OF is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +CONFIG_USB_UHCI_HCD=y +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# + +# +# see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=m +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB port drivers +# +# CONFIG_USB_USS720 is not set +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +# CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# +# CONFIG_UWB is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_INFINIBAND is not set +# CONFIG_EDAC is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +CONFIG_RTC_DRV_CMOS=y +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +# CONFIG_RTC_DRV_PPC is not set +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_UIO is not set +# CONFIG_STAGING is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +CONFIG_EXT4_FS=y +# CONFIG_EXT4DEV_COMPAT is not set +CONFIG_EXT4_FS_XATTR=y +# CONFIG_EXT4_FS_POSIX_ACL is not set +# CONFIG_EXT4_FS_SECURITY is not set +CONFIG_JBD=y +CONFIG_JBD2=y +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=y +# CONFIG_JOLIET is not set +# CONFIG_ZISOFS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=m +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +CONFIG_AFFS_FS=m +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +# CONFIG_NFS_FS is not set +# CONFIG_NFSD is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +CONFIG_AMIGA_PARTITION=y +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +CONFIG_NLS_ASCII=y +CONFIG_NLS_ISO8859_1=m +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set +# CONFIG_DLM is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +CONFIG_CRC_CCITT=m +CONFIG_CRC16=y +CONFIG_CRC_T10DIF=y +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=m +CONFIG_ZLIB_DEFLATE=m +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +CONFIG_DEBUG_MUTEXES=y +CONFIG_DEBUG_SPINLOCK_SLEEP=y +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_HIGHMEM is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +CONFIG_DEBUG_MEMORY_INIT=y +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +CONFIG_PRINT_STACK_DEPTH=64 +# CONFIG_DEBUG_STACKOVERFLOW is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_PAGEALLOC is not set +# CONFIG_CODE_PATCHING_SELFTEST is not set +# CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_MSI_BITMAP_SELFTEST is not set +CONFIG_XMON=y +CONFIG_XMON_DEFAULT=y +CONFIG_XMON_DISASSEMBLY=y +CONFIG_DEBUGGER=y +CONFIG_IRQSTACKS=y +# CONFIG_BDI_SWITCH is not set +# CONFIG_BOOTX_TEXT is not set +# CONFIG_PPC_EARLY_DEBUG is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +CONFIG_CRYPTO_ALGAPI=m +CONFIG_CRYPTO_ALGAPI2=m +CONFIG_CRYPTO_AEAD2=m +CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_BLKCIPHER2=m +CONFIG_CRYPTO_HASH=m +CONFIG_CRYPTO_HASH2=m +CONFIG_CRYPTO_RNG2=m +CONFIG_CRYPTO_MANAGER=m +CONFIG_CRYPTO_MANAGER2=m +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=m +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=m +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +CONFIG_CRYPTO_SHA1=m +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +CONFIG_CRYPTO_ARC4=m +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +# CONFIG_CRYPTO_HW is not set +# CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/include/asm/highmem.h b/arch/powerpc/include/asm/highmem.h index 04e4a620952e..a286e47100b5 100644 --- a/arch/powerpc/include/asm/highmem.h +++ b/arch/powerpc/include/asm/highmem.h @@ -99,7 +99,7 @@ static inline void *kmap_atomic_prot(struct page *page, enum km_type type, pgpro #ifdef CONFIG_DEBUG_HIGHMEM BUG_ON(!pte_none(*(kmap_pte-idx))); #endif - __set_pte_at(&init_mm, vaddr, kmap_pte-idx, mk_pte(page, prot)); + __set_pte_at(&init_mm, vaddr, kmap_pte-idx, mk_pte(page, prot), 1); local_flush_tlb_page(NULL, vaddr); return (void*) vaddr; diff --git a/arch/powerpc/include/asm/machdep.h b/arch/powerpc/include/asm/machdep.h index 2740c44ff717..6c34a0df82fd 100644 --- a/arch/powerpc/include/asm/machdep.h +++ b/arch/powerpc/include/asm/machdep.h @@ -327,8 +327,6 @@ extern void __devinit smp_generic_take_timebase(void); */ /* Print a boot progress message. */ void ppc64_boot_msg(unsigned int src, const char *msg); -/* Print a termination message (print only -- does not stop the kernel) */ -void ppc64_terminate_msg(unsigned int src, const char *msg); static inline void log_error(char *buf, unsigned int err_type, int fatal) { diff --git a/arch/powerpc/include/asm/pgtable-ppc32.h b/arch/powerpc/include/asm/pgtable-ppc32.h index 820b5f0a35ce..98bd7c5fcd0e 100644 --- a/arch/powerpc/include/asm/pgtable-ppc32.h +++ b/arch/powerpc/include/asm/pgtable-ppc32.h @@ -429,10 +429,11 @@ extern int icache_44x_need_flush; #define PMD_PAGE_SIZE(pmd) bad_call_to_PMD_PAGE_SIZE() #endif +#define _PAGE_HPTEFLAGS _PAGE_HASHPTE + #define _PAGE_CHG_MASK (PAGE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY | \ _PAGE_SPECIAL) - #define PAGE_PROT_BITS (_PAGE_GUARDED | _PAGE_COHERENT | _PAGE_NO_CACHE | \ _PAGE_WRITETHRU | _PAGE_ENDIAN | \ _PAGE_USER | _PAGE_ACCESSED | \ @@ -668,44 +669,6 @@ static inline unsigned long long pte_update(pte_t *p, #endif /* CONFIG_PTE_64BIT */ /* - * set_pte stores a linux PTE into the linux page table. - * On machines which use an MMU hash table we avoid changing the - * _PAGE_HASHPTE bit. - */ - -static inline void __set_pte_at(struct mm_struct *mm, unsigned long addr, - pte_t *ptep, pte_t pte) -{ -#if (_PAGE_HASHPTE != 0) && defined(CONFIG_SMP) && !defined(CONFIG_PTE_64BIT) - pte_update(ptep, ~_PAGE_HASHPTE, pte_val(pte) & ~_PAGE_HASHPTE); -#elif defined(CONFIG_PTE_64BIT) && defined(CONFIG_SMP) -#if _PAGE_HASHPTE != 0 - if (pte_val(*ptep) & _PAGE_HASHPTE) - flush_hash_entry(mm, ptep, addr); -#endif - __asm__ __volatile__("\ - stw%U0%X0 %2,%0\n\ - eieio\n\ - stw%U0%X0 %L2,%1" - : "=m" (*ptep), "=m" (*((unsigned char *)ptep+4)) - : "r" (pte) : "memory"); -#else - *ptep = __pte((pte_val(*ptep) & _PAGE_HASHPTE) - | (pte_val(pte) & ~_PAGE_HASHPTE)); -#endif -} - - -static inline void set_pte_at(struct mm_struct *mm, unsigned long addr, - pte_t *ptep, pte_t pte) -{ -#if defined(CONFIG_PTE_64BIT) && defined(CONFIG_SMP) && defined(CONFIG_DEBUG_VM) - WARN_ON(pte_present(*ptep)); -#endif - __set_pte_at(mm, addr, ptep, pte); -} - -/* * 2.6 calls this without flushing the TLB entry; this is wrong * for our hash-based implementation, we fix that up here. */ @@ -745,24 +708,14 @@ static inline void huge_ptep_set_wrprotect(struct mm_struct *mm, } -#define __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS -static inline void __ptep_set_access_flags(pte_t *ptep, pte_t entry, int dirty) +static inline void __ptep_set_access_flags(pte_t *ptep, pte_t entry) { unsigned long bits = pte_val(entry) & - (_PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_RW); + (_PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_RW | + _PAGE_HWEXEC | _PAGE_EXEC); pte_update(ptep, 0, bits); } -#define ptep_set_access_flags(__vma, __address, __ptep, __entry, __dirty) \ -({ \ - int __changed = !pte_same(*(__ptep), __entry); \ - if (__changed) { \ - __ptep_set_access_flags(__ptep, __entry, __dirty); \ - flush_tlb_page_nohash(__vma, __address); \ - } \ - __changed; \ -}) - #define __HAVE_ARCH_PTE_SAME #define pte_same(A,B) (((pte_val(A) ^ pte_val(B)) & ~_PAGE_HASHPTE) == 0) diff --git a/arch/powerpc/include/asm/pgtable-ppc64.h b/arch/powerpc/include/asm/pgtable-ppc64.h index b0f18be81d9f..c627877fcf16 100644 --- a/arch/powerpc/include/asm/pgtable-ppc64.h +++ b/arch/powerpc/include/asm/pgtable-ppc64.h @@ -125,6 +125,8 @@ #define _PTEIDX_SECONDARY 0x8 #define _PTEIDX_GROUP_IX 0x7 +/* To make some generic powerpc code happy */ +#define _PAGE_HWEXEC 0 /* * POWER4 and newer have per page execute protection, older chips can only @@ -285,6 +287,10 @@ static inline unsigned long pte_update(struct mm_struct *mm, : "r" (ptep), "r" (clr), "m" (*ptep), "i" (_PAGE_BUSY) : "cc" ); + /* huge pages use the old page table lock */ + if (!huge) + assert_pte_locked(mm, addr); + if (old & _PAGE_HASHPTE) hpte_need_flush(mm, addr, ptep, old, huge); return old; @@ -359,23 +365,11 @@ static inline void pte_clear(struct mm_struct *mm, unsigned long addr, pte_update(mm, addr, ptep, ~0UL, 0); } -/* - * set_pte stores a linux PTE into the linux page table. - */ -static inline void set_pte_at(struct mm_struct *mm, unsigned long addr, - pte_t *ptep, pte_t pte) -{ - if (pte_present(*ptep)) - pte_clear(mm, addr, ptep); - pte = __pte(pte_val(pte) & ~_PAGE_HPTEFLAGS); - *ptep = pte; -} /* Set the dirty and/or accessed bits atomically in a linux PTE, this * function doesn't need to flush the hash entry */ -#define __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS -static inline void __ptep_set_access_flags(pte_t *ptep, pte_t entry, int dirty) +static inline void __ptep_set_access_flags(pte_t *ptep, pte_t entry) { unsigned long bits = pte_val(entry) & (_PAGE_DIRTY | _PAGE_ACCESSED | _PAGE_RW | _PAGE_EXEC); @@ -392,15 +386,6 @@ static inline void __ptep_set_access_flags(pte_t *ptep, pte_t entry, int dirty) :"r" (bits), "r" (ptep), "m" (*ptep), "i" (_PAGE_BUSY) :"cc"); } -#define ptep_set_access_flags(__vma, __address, __ptep, __entry, __dirty) \ -({ \ - int __changed = !pte_same(*(__ptep), __entry); \ - if (__changed) { \ - __ptep_set_access_flags(__ptep, __entry, __dirty); \ - flush_tlb_page_nohash(__vma, __address); \ - } \ - __changed; \ -}) #define __HAVE_ARCH_PTE_SAME #define pte_same(A,B) (((pte_val(A) ^ pte_val(B)) & ~_PAGE_HPTEFLAGS) == 0) diff --git a/arch/powerpc/include/asm/pgtable.h b/arch/powerpc/include/asm/pgtable.h index 07f55e601696..5c1c4880723c 100644 --- a/arch/powerpc/include/asm/pgtable.h +++ b/arch/powerpc/include/asm/pgtable.h @@ -6,7 +6,17 @@ #include <asm/processor.h> /* For TASK_SIZE */ #include <asm/mmu.h> #include <asm/page.h> + struct mm_struct; + +#ifdef CONFIG_DEBUG_VM +extern void assert_pte_locked(struct mm_struct *mm, unsigned long addr); +#else /* CONFIG_DEBUG_VM */ +static inline void assert_pte_locked(struct mm_struct *mm, unsigned long addr) +{ +} +#endif /* !CONFIG_DEBUG_VM */ + #endif /* !__ASSEMBLY__ */ #if defined(CONFIG_PPC64) @@ -17,6 +27,80 @@ struct mm_struct; #ifndef __ASSEMBLY__ +/* Insert a PTE, top-level function is out of line. It uses an inline + * low level function in the respective pgtable-* files + */ +extern void set_pte_at(struct mm_struct *mm, unsigned long addr, pte_t *ptep, + pte_t pte); + +/* This low level function performs the actual PTE insertion + * Setting the PTE depends on the MMU type and other factors. It's + * an horrible mess that I'm not going to try to clean up now but + * I'm keeping it in one place rather than spread around + */ +static inline void __set_pte_at(struct mm_struct *mm, unsigned long addr, + pte_t *ptep, pte_t pte, int percpu) +{ +#if defined(CONFIG_PPC_STD_MMU_32) && defined(CONFIG_SMP) && !defined(CONFIG_PTE_64BIT) + /* First case is 32-bit Hash MMU in SMP mode with 32-bit PTEs. We use the + * helper pte_update() which does an atomic update. We need to do that + * because a concurrent invalidation can clear _PAGE_HASHPTE. If it's a + * per-CPU PTE such as a kmap_atomic, we do a simple update preserving + * the hash bits instead (ie, same as the non-SMP case) + */ + if (percpu) + *ptep = __pte((pte_val(*ptep) & _PAGE_HASHPTE) + | (pte_val(pte) & ~_PAGE_HASHPTE)); + else + pte_update(ptep, ~_PAGE_HASHPTE, pte_val(pte)); + +#elif defined(CONFIG_PPC32) && defined(CONFIG_PTE_64BIT) && defined(CONFIG_SMP) + /* Second case is 32-bit with 64-bit PTE in SMP mode. In this case, we + * can just store as long as we do the two halves in the right order + * with a barrier in between. This is possible because we take care, + * in the hash code, to pre-invalidate if the PTE was already hashed, + * which synchronizes us with any concurrent invalidation. + * In the percpu case, we also fallback to the simple update preserving + * the hash bits + */ + if (percpu) { + *ptep = __pte((pte_val(*ptep) & _PAGE_HASHPTE) + | (pte_val(pte) & ~_PAGE_HASHPTE)); + return; + } +#if _PAGE_HASHPTE != 0 + if (pte_val(*ptep) & _PAGE_HASHPTE) + flush_hash_entry(mm, ptep, addr); +#endif + __asm__ __volatile__("\ + stw%U0%X0 %2,%0\n\ + eieio\n\ + stw%U0%X0 %L2,%1" + : "=m" (*ptep), "=m" (*((unsigned char *)ptep+4)) + : "r" (pte) : "memory"); + +#elif defined(CONFIG_PPC_STD_MMU_32) + /* Third case is 32-bit hash table in UP mode, we need to preserve + * the _PAGE_HASHPTE bit since we may not have invalidated the previous + * translation in the hash yet (done in a subsequent flush_tlb_xxx()) + * and see we need to keep track that this PTE needs invalidating + */ + *ptep = __pte((pte_val(*ptep) & _PAGE_HASHPTE) + | (pte_val(pte) & ~_PAGE_HASHPTE)); + +#else + /* Anything else just stores the PTE normally. That covers all 64-bit + * cases, and 32-bit non-hash with 64-bit PTEs in UP mode + */ + *ptep = pte; +#endif +} + + +#define __HAVE_ARCH_PTEP_SET_ACCESS_FLAGS +extern int ptep_set_access_flags(struct vm_area_struct *vma, unsigned long address, + pte_t *ptep, pte_t entry, int dirty); + /* * Macro to mark a page protection value as "uncacheable". */ diff --git a/arch/powerpc/include/asm/reg_booke.h b/arch/powerpc/include/asm/reg_booke.h index 67453766bff1..597debe780bd 100644 --- a/arch/powerpc/include/asm/reg_booke.h +++ b/arch/powerpc/include/asm/reg_booke.h @@ -110,6 +110,7 @@ #define SPRN_L1CSR0 0x3F2 /* L1 Cache Control and Status Register 0 */ #define SPRN_L1CSR1 0x3F3 /* L1 Cache Control and Status Register 1 */ #define SPRN_MMUCSR0 0x3F4 /* MMU Control and Status Register 0 */ +#define SPRN_MMUCFG 0x3F7 /* MMU Configuration Register */ #define SPRN_PIT 0x3DB /* Programmable Interval Timer */ #define SPRN_BUCSR 0x3F5 /* Branch Unit Control and Status */ #define SPRN_L2CSR0 0x3F9 /* L2 Data Cache Control and Status Register 0 */ diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index 8d1a419df35d..d15992119085 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -61,6 +61,7 @@ obj-$(CONFIG_HIBERNATION) += swsusp.o suspend.o \ obj64-$(CONFIG_HIBERNATION) += swsusp_asm64.o obj-$(CONFIG_MODULES) += module.o module_$(CONFIG_WORD_SIZE).o obj-$(CONFIG_44x) += cpu_setup_44x.o +obj-$(CONFIG_FSL_BOOKE) += cpu_setup_fsl_booke.o extra-$(CONFIG_PPC_STD_MMU) := head_32.o extra-$(CONFIG_PPC64) := head_64.o diff --git a/arch/powerpc/kernel/cpu_setup_fsl_booke.S b/arch/powerpc/kernel/cpu_setup_fsl_booke.S new file mode 100644 index 000000000000..eb4b9adcedb4 --- /dev/null +++ b/arch/powerpc/kernel/cpu_setup_fsl_booke.S @@ -0,0 +1,31 @@ +/* + * This file contains low level CPU setup functions. + * Kumar Gala <galak@kernel.crashing.org> + * Copyright 2009 Freescale Semiconductor, Inc. + * + * Based on cpu_setup_6xx code by + * Benjamin Herrenschmidt <benh@kernel.crashing.org> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + */ + +#include <asm/processor.h> +#include <asm/cputable.h> +#include <asm/ppc_asm.h> + +_GLOBAL(__setup_cpu_e200) + /* enable dedicated debug exception handling resources (Debug APU) */ + mfspr r3,SPRN_HID0 + ori r3,r3,HID0_DAPUEN@l + mtspr SPRN_HID0,r3 + b __setup_e200_ivors +_GLOBAL(__setup_cpu_e500v1) +_GLOBAL(__setup_cpu_e500v2) + b __setup_e500_ivors +_GLOBAL(__setup_cpu_e500mc) + b __setup_e500mc_ivors + diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c index 923f87aff20a..9fdf1b8027b5 100644 --- a/arch/powerpc/kernel/cputable.c +++ b/arch/powerpc/kernel/cputable.c @@ -35,6 +35,10 @@ const char *powerpc_base_platform; * and ppc64 */ #ifdef CONFIG_PPC32 +extern void __setup_cpu_e200(unsigned long offset, struct cpu_spec* spec); +extern void __setup_cpu_e500v1(unsigned long offset, struct cpu_spec* spec); +extern void __setup_cpu_e500v2(unsigned long offset, struct cpu_spec* spec); +extern void __setup_cpu_e500mc(unsigned long offset, struct cpu_spec* spec); extern void __setup_cpu_440ep(unsigned long offset, struct cpu_spec* spec); extern void __setup_cpu_440epx(unsigned long offset, struct cpu_spec* spec); extern void __setup_cpu_440gx(unsigned long offset, struct cpu_spec* spec); @@ -1687,6 +1691,7 @@ static struct cpu_spec __initdata cpu_specs[] = { PPC_FEATURE_UNIFIED_CACHE, .mmu_features = MMU_FTR_TYPE_FSL_E, .dcache_bsize = 32, + .cpu_setup = __setup_cpu_e200, .machine_check = machine_check_e200, .platform = "ppc5554", } @@ -1706,6 +1711,7 @@ static struct cpu_spec __initdata cpu_specs[] = { .num_pmcs = 4, .oprofile_cpu_type = "ppc/e500", .oprofile_type = PPC_OPROFILE_FSL_EMB, + .cpu_setup = __setup_cpu_e500v1, .machine_check = machine_check_e500, .platform = "ppc8540", }, @@ -1724,6 +1730,7 @@ static struct cpu_spec __initdata cpu_specs[] = { .num_pmcs = 4, .oprofile_cpu_type = "ppc/e500", .oprofile_type = PPC_OPROFILE_FSL_EMB, + .cpu_setup = __setup_cpu_e500v2, .machine_check = machine_check_e500, .platform = "ppc8548", }, @@ -1739,6 +1746,7 @@ static struct cpu_spec __initdata cpu_specs[] = { .num_pmcs = 4, .oprofile_cpu_type = "ppc/e500", /* xxx - galak, e500mc? */ .oprofile_type = PPC_OPROFILE_FSL_EMB, + .cpu_setup = __setup_cpu_e500mc, .machine_check = machine_check_e500, .platform = "ppce500mc", }, diff --git a/arch/powerpc/kernel/head_booke.h b/arch/powerpc/kernel/head_booke.h index fce2df988504..bec18078239d 100644 --- a/arch/powerpc/kernel/head_booke.h +++ b/arch/powerpc/kernel/head_booke.h @@ -70,10 +70,10 @@ /* only on e500mc/e200 */ #define DEBUG_STACK_BASE dbgirq_ctx -#ifdef CONFIG_PPC_E500MC -#define DEBUG_SPRG SPRN_SPRG9 -#else +#ifdef CONFIG_E200 #define DEBUG_SPRG SPRN_SPRG6W +#else +#define DEBUG_SPRG SPRN_SPRG9 #endif #define EXC_LVL_FRAME_OVERHEAD (THREAD_SIZE - INT_FRAME_SIZE - EXC_LVL_SIZE) diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S index 36ffb3504a4f..64ecb1603a77 100644 --- a/arch/powerpc/kernel/head_fsl_booke.S +++ b/arch/powerpc/kernel/head_fsl_booke.S @@ -103,10 +103,15 @@ invstr: mflr r6 /* Make it accessible */ or r7,r7,r4 mtspr SPRN_MAS6,r7 tlbsx 0,r6 /* search MSR[IS], SPID=PID0 */ -#ifndef CONFIG_E200 mfspr r7,SPRN_MAS1 andis. r7,r7,MAS1_VALID@h bne match_TLB + + mfspr r7,SPRN_MMUCFG + rlwinm r7,r7,21,28,31 /* extract MMUCFG[NPIDS] */ + cmpwi r7,3 + bne match_TLB /* skip if NPIDS != 3 */ + mfspr r7,SPRN_PID1 slwi r7,r7,16 or r7,r7,r4 @@ -120,7 +125,7 @@ invstr: mflr r6 /* Make it accessible */ or r7,r7,r4 mtspr SPRN_MAS6,r7 tlbsx 0,r6 /* Fall through, we had to match */ -#endif + match_TLB: mfspr r7,SPRN_MAS0 rlwinm r3,r7,16,20,31 /* Extract MAS0(Entry) */ @@ -215,14 +220,19 @@ skpinv: addi r6,r6,1 /* Increment */ /* 4. Clear out PIDs & Search info */ li r6,0 + mtspr SPRN_MAS6,r6 mtspr SPRN_PID0,r6 -#ifndef CONFIG_E200 + + mfspr r7,SPRN_MMUCFG + rlwinm r7,r7,21,28,31 /* extract MMUCFG[NPIDS] */ + cmpwi r7,3 + bne 2f /* skip if NPIDS != 3 */ + mtspr SPRN_PID1,r6 mtspr SPRN_PID2,r6 -#endif - mtspr SPRN_MAS6,r6 /* 5. Invalidate mapping we started in */ +2: lis r7,0x1000 /* Set MAS0(TLBSEL) = 1 */ rlwimi r7,r3,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r3) */ mtspr SPRN_MAS0,r7 @@ -298,19 +308,7 @@ skpinv: addi r6,r6,1 /* Increment */ SET_IVOR(12, WatchdogTimer); SET_IVOR(13, DataTLBError); SET_IVOR(14, InstructionTLBError); - SET_IVOR(15, DebugDebug); -#if defined(CONFIG_E500) && !defined(CONFIG_PPC_E500MC) SET_IVOR(15, DebugCrit); -#endif - SET_IVOR(32, SPEUnavailable); - SET_IVOR(33, SPEFloatingPointData); - SET_IVOR(34, SPEFloatingPointRound); -#ifndef CONFIG_E200 - SET_IVOR(35, PerformanceMonitor); -#endif -#ifdef CONFIG_PPC_E500MC - SET_IVOR(36, Doorbell); -#endif /* Establish the interrupt vector base */ lis r4,interrupt_base@h /* IVPR only uses the high 16-bits */ @@ -329,12 +327,6 @@ skpinv: addi r6,r6,1 /* Increment */ oris r2,r2,HID0_DOZE@h mtspr SPRN_HID0, r2 #endif -#ifdef CONFIG_E200 - /* enable dedicated debug exception handling resources (Debug APU) */ - mfspr r2,SPRN_HID0 - ori r2,r2,HID0_DAPUEN@l - mtspr SPRN_HID0,r2 -#endif #if !defined(CONFIG_BDI_SWITCH) /* @@ -706,15 +698,11 @@ interrupt_base: /* Performance Monitor */ EXCEPTION(0x2060, PerformanceMonitor, performance_monitor_exception, EXC_XFER_STD) -#ifdef CONFIG_PPC_E500MC EXCEPTION(0x2070, Doorbell, unknown_exception, EXC_XFER_STD) -#endif /* Debug Interrupt */ DEBUG_DEBUG_EXCEPTION -#if defined(CONFIG_E500) && !defined(CONFIG_PPC_E500MC) DEBUG_CRIT_EXCEPTION -#endif /* * Local functions @@ -897,6 +885,45 @@ KernelSPE: * Global functions */ +/* Adjust or setup IVORs for e200 */ +_GLOBAL(__setup_e200_ivors) + li r3,DebugDebug@l + mtspr SPRN_IVOR15,r3 + li r3,SPEUnavailable@l + mtspr SPRN_IVOR32,r3 + li r3,SPEFloatingPointData@l + mtspr SPRN_IVOR33,r3 + li r3,SPEFloatingPointRound@l + mtspr SPRN_IVOR34,r3 + sync + blr + +/* Adjust or setup IVORs for e500v1/v2 */ +_GLOBAL(__setup_e500_ivors) + li r3,DebugCrit@l + mtspr SPRN_IVOR15,r3 + li r3,SPEUnavailable@l + mtspr SPRN_IVOR32,r3 + li r3,SPEFloatingPointData@l + mtspr SPRN_IVOR33,r3 + li r3,SPEFloatingPointRound@l + mtspr SPRN_IVOR34,r3 + li r3,PerformanceMonitor@l + mtspr SPRN_IVOR35,r3 + sync + blr + +/* Adjust or setup IVORs for e500mc */ +_GLOBAL(__setup_e500mc_ivors) + li r3,DebugDebug@l + mtspr SPRN_IVOR15,r3 + li r3,PerformanceMonitor@l + mtspr SPRN_IVOR35,r3 + li r3,Doorbell@l + mtspr SPRN_IVOR36,r3 + sync + blr + /* * extern void loadcam_entry(unsigned int index) * diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c index 0f4181272311..2ad17315fc88 100644 --- a/arch/powerpc/kernel/pci-common.c +++ b/arch/powerpc/kernel/pci-common.c @@ -38,6 +38,7 @@ #include <asm/eeh.h> static DEFINE_SPINLOCK(hose_spinlock); +LIST_HEAD(hose_list); /* XXX kill that some day ... */ static int global_phb_number; /* Global phb counter */ @@ -113,19 +114,24 @@ void pcibios_free_controller(struct pci_controller *phb) kfree(phb); } +static resource_size_t pcibios_io_size(const struct pci_controller *hose) +{ +#ifdef CONFIG_PPC64 + return hose->pci_io_size; +#else + return hose->io_resource.end - hose->io_resource.start + 1; +#endif +} + int pcibios_vaddr_is_ioport(void __iomem *address) { int ret = 0; struct pci_controller *hose; - unsigned long size; + resource_size_t size; spin_lock(&hose_spinlock); list_for_each_entry(hose, &hose_list, list_node) { -#ifdef CONFIG_PPC64 - size = hose->pci_io_size; -#else - size = hose->io_resource.end - hose->io_resource.start + 1; -#endif + size = pcibios_io_size(hose); if (address >= hose->io_base_virt && address < (hose->io_base_virt + size)) { ret = 1; @@ -136,6 +142,29 @@ int pcibios_vaddr_is_ioport(void __iomem *address) return ret; } +unsigned long pci_address_to_pio(phys_addr_t address) +{ + struct pci_controller *hose; + resource_size_t size; + unsigned long ret = ~0; + + spin_lock(&hose_spinlock); + list_for_each_entry(hose, &hose_list, list_node) { + size = pcibios_io_size(hose); + if (address >= hose->io_base_phys && + address < (hose->io_base_phys + size)) { + unsigned long base = + (unsigned long)hose->io_base_virt - _IO_BASE; + ret = base + (address - hose->io_base_phys); + break; + } + } + spin_unlock(&hose_spinlock); + + return ret; +} +EXPORT_SYMBOL_GPL(pci_address_to_pio); + /* * Return the domain number for this bus. */ diff --git a/arch/powerpc/kernel/pci_32.c b/arch/powerpc/kernel/pci_32.c index 132cd80afa21..c6368506455f 100644 --- a/arch/powerpc/kernel/pci_32.c +++ b/arch/powerpc/kernel/pci_32.c @@ -20,6 +20,7 @@ #include <asm/prom.h> #include <asm/sections.h> #include <asm/pci-bridge.h> +#include <asm/ppc-pci.h> #include <asm/byteorder.h> #include <asm/uaccess.h> #include <asm/machdep.h> @@ -43,8 +44,6 @@ static u8* pci_to_OF_bus_map; */ static int pci_assign_all_buses; -LIST_HEAD(hose_list); - static int pci_bus_count; /* This will remain NULL for now, until isa-bridge.c is made common @@ -491,24 +490,6 @@ long sys_pciconfig_iobase(long which, unsigned long bus, unsigned long devfn) return result; } -unsigned long pci_address_to_pio(phys_addr_t address) -{ - struct pci_controller *hose, *tmp; - - list_for_each_entry_safe(hose, tmp, &hose_list, list_node) { - unsigned int size = hose->io_resource.end - - hose->io_resource.start + 1; - if (address >= hose->io_base_phys && - address < (hose->io_base_phys + size)) { - unsigned long base = - (unsigned long)hose->io_base_virt - _IO_BASE; - return base + (address - hose->io_base_phys); - } - } - return (unsigned int)-1; -} -EXPORT_SYMBOL(pci_address_to_pio); - /* * Null PCI config access functions, for the case when we can't * find a hose. diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c index ea8eda8c87cf..be574fc0d92f 100644 --- a/arch/powerpc/kernel/pci_64.c +++ b/arch/powerpc/kernel/pci_64.c @@ -43,8 +43,6 @@ unsigned long pci_probe_only = 1; unsigned long pci_io_base = ISA_IO_BASE; EXPORT_SYMBOL(pci_io_base); -LIST_HEAD(hose_list); - static void fixup_broken_pcnet32(struct pci_dev* dev) { if ((dev->class>>8 == PCI_CLASS_NETWORK_ETHERNET)) { @@ -524,23 +522,6 @@ int __devinit pcibios_map_io_space(struct pci_bus *bus) } EXPORT_SYMBOL_GPL(pcibios_map_io_space); -unsigned long pci_address_to_pio(phys_addr_t address) -{ - struct pci_controller *hose, *tmp; - - list_for_each_entry_safe(hose, tmp, &hose_list, list_node) { - if (address >= hose->io_base_phys && - address < (hose->io_base_phys + hose->pci_io_size)) { - unsigned long base = - (unsigned long)hose->io_base_virt - _IO_BASE; - return base + (address - hose->io_base_phys); - } - } - return (unsigned int)-1; -} -EXPORT_SYMBOL_GPL(pci_address_to_pio); - - #define IOBASE_BRIDGE_NUMBER 0 #define IOBASE_MEMORY 1 #define IOBASE_IO 2 diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c index f00f83109ab3..5ec6a9e23933 100644 --- a/arch/powerpc/kernel/prom.c +++ b/arch/powerpc/kernel/prom.c @@ -1075,11 +1075,6 @@ static void __init early_reserve_mem(void) DBG("reserving: %llx -> %llx\n", base, size); lmb_reserve(base, size); } - -#if 0 - DBG("memory reserved, lmbs :\n"); - lmb_dump_all(); -#endif } #ifdef CONFIG_PHYP_DUMP @@ -1221,6 +1216,7 @@ void __init early_init_devtree(void *params) lmb_enforce_memory_limit(limit); lmb_analyze(); + lmb_dump_all(); DBG("Phys. mem: %lx\n", lmb_phys_mem_size()); diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c index 2d34196bba8c..73e16e298e28 100644 --- a/arch/powerpc/kernel/setup_64.c +++ b/arch/powerpc/kernel/setup_64.c @@ -578,13 +578,6 @@ void ppc64_boot_msg(unsigned int src, const char *msg) printk("[boot]%04x %s\n", src, msg); } -/* Print a termination message (print only -- does not stop the kernel) */ -void ppc64_terminate_msg(unsigned int src, const char *msg) -{ - ppc64_do_msg(PPC64_LINUX_FUNCTION|PPC64_TERM_MESSAGE|src, msg); - printk("[terminate]%04x %s\n", src, msg); -} - void cpu_die(void) { if (ppc_md.cpu_die) diff --git a/arch/powerpc/mm/fault.c b/arch/powerpc/mm/fault.c index 91c7b8636b8a..76993941cac9 100644 --- a/arch/powerpc/mm/fault.c +++ b/arch/powerpc/mm/fault.c @@ -253,45 +253,33 @@ good_area: #endif /* CONFIG_8xx */ if (is_exec) { -#if !(defined(CONFIG_4xx) || defined(CONFIG_BOOKE)) - /* protection fault */ +#ifdef CONFIG_PPC_STD_MMU + /* Protection fault on exec go straight to failure on + * Hash based MMUs as they either don't support per-page + * execute permission, or if they do, it's handled already + * at the hash level. This test would probably have to + * be removed if we change the way this works to make hash + * processors use the same I/D cache coherency mechanism + * as embedded. + */ if (error_code & DSISR_PROTFAULT) goto bad_area; +#endif /* CONFIG_PPC_STD_MMU */ + /* * Allow execution from readable areas if the MMU does not * provide separate controls over reading and executing. + * + * Note: That code used to not be enabled for 4xx/BookE. + * It is now as I/D cache coherency for these is done at + * set_pte_at() time and I see no reason why the test + * below wouldn't be valid on those processors. This -may- + * break programs compiled with a really old ABI though. */ if (!(vma->vm_flags & VM_EXEC) && (cpu_has_feature(CPU_FTR_NOEXECUTE) || !(vma->vm_flags & (VM_READ | VM_WRITE)))) goto bad_area; -#else - pte_t *ptep; - pmd_t *pmdp; - - /* Since 4xx/Book-E supports per-page execute permission, - * we lazily flush dcache to icache. */ - ptep = NULL; - if (get_pteptr(mm, address, &ptep, &pmdp)) { - spinlock_t *ptl = pte_lockptr(mm, pmdp); - spin_lock(ptl); - if (pte_present(*ptep)) { - struct page *page = pte_page(*ptep); - - if (!test_bit(PG_arch_1, &page->flags)) { - flush_dcache_icache_page(page); - set_bit(PG_arch_1, &page->flags); - } - pte_update(ptep, 0, _PAGE_HWEXEC | - _PAGE_ACCESSED); - local_flush_tlb_page(vma, address); - pte_unmap_unlock(ptep, ptl); - up_read(&mm->mmap_sem); - return 0; - } - pte_unmap_unlock(ptep, ptl); - } -#endif /* a write */ } else if (is_write) { if (!(vma->vm_flags & VM_WRITE)) diff --git a/arch/powerpc/mm/fsl_booke_mmu.c b/arch/powerpc/mm/fsl_booke_mmu.c index ea6e41e39d9f..3d8cf01582f5 100644 --- a/arch/powerpc/mm/fsl_booke_mmu.c +++ b/arch/powerpc/mm/fsl_booke_mmu.c @@ -56,10 +56,14 @@ extern void loadcam_entry(unsigned int index); unsigned int tlbcam_index; -static unsigned long __cam0, __cam1, __cam2; +static unsigned long cam[CONFIG_LOWMEM_CAM_NUM]; #define NUM_TLBCAMS (16) +#if defined(CONFIG_LOWMEM_CAM_NUM_BOOL) && (CONFIG_LOWMEM_CAM_NUM >= NUM_TLBCAMS) +#error "LOWMEM_CAM_NUM must be less than NUM_TLBCAMS" +#endif + struct tlbcam TLBCAM[NUM_TLBCAMS]; struct tlbcamrange { @@ -152,19 +156,19 @@ void invalidate_tlbcam_entry(int index) loadcam_entry(index); } -void __init cam_mapin_ram(unsigned long cam0, unsigned long cam1, - unsigned long cam2) +unsigned long __init mmu_mapin_ram(void) { - settlbcam(0, PAGE_OFFSET, memstart_addr, cam0, _PAGE_KERNEL, 0); - tlbcam_index++; - if (cam1) { - tlbcam_index++; - settlbcam(1, PAGE_OFFSET+cam0, memstart_addr+cam0, cam1, _PAGE_KERNEL, 0); - } - if (cam2) { + unsigned long virt = PAGE_OFFSET; + phys_addr_t phys = memstart_addr; + + while (cam[tlbcam_index] && tlbcam_index < ARRAY_SIZE(cam)) { + settlbcam(tlbcam_index, virt, phys, cam[tlbcam_index], _PAGE_KERNEL, 0); + virt += cam[tlbcam_index]; + phys += cam[tlbcam_index]; tlbcam_index++; - settlbcam(2, PAGE_OFFSET+cam0+cam1, memstart_addr+cam0+cam1, cam2, _PAGE_KERNEL, 0); } + + return virt - PAGE_OFFSET; } /* @@ -175,51 +179,46 @@ void __init MMU_init_hw(void) flush_instruction_cache(); } -unsigned long __init mmu_mapin_ram(void) -{ - cam_mapin_ram(__cam0, __cam1, __cam2); - - return __cam0 + __cam1 + __cam2; -} - - void __init adjust_total_lowmem(void) { - phys_addr_t max_lowmem_size = __max_low_memory; - phys_addr_t cam_max_size = 0x10000000; phys_addr_t ram; + unsigned int max_cam = (mfspr(SPRN_TLB1CFG) >> 16) & 0xff; + char buf[ARRAY_SIZE(cam) * 5 + 1], *p = buf; + int i; + unsigned long virt = PAGE_OFFSET & 0xffffffffUL; + unsigned long phys = memstart_addr & 0xffffffffUL; - /* adjust CAM size to max_lowmem_size */ - if (max_lowmem_size < cam_max_size) - cam_max_size = max_lowmem_size; + /* Convert (4^max) kB to (2^max) bytes */ + max_cam = max_cam * 2 + 10; - /* adjust lowmem size to max_lowmem_size */ - ram = min(max_lowmem_size, total_lowmem); + /* adjust lowmem size to __max_low_memory */ + ram = min((phys_addr_t)__max_low_memory, (phys_addr_t)total_lowmem); /* Calculate CAM values */ - __cam0 = 1UL << 2 * (__ilog2(ram) / 2); - if (__cam0 > cam_max_size) - __cam0 = cam_max_size; - ram -= __cam0; - if (ram) { - __cam1 = 1UL << 2 * (__ilog2(ram) / 2); - if (__cam1 > cam_max_size) - __cam1 = cam_max_size; - ram -= __cam1; - } - if (ram) { - __cam2 = 1UL << 2 * (__ilog2(ram) / 2); - if (__cam2 > cam_max_size) - __cam2 = cam_max_size; - ram -= __cam2; + __max_low_memory = 0; + for (i = 0; ram && i < ARRAY_SIZE(cam); i++) { + unsigned int camsize = __ilog2(ram) & ~1U; + unsigned int align = __ffs(virt | phys) & ~1U; + + if (camsize > align) + camsize = align; + if (camsize > max_cam) + camsize = max_cam; + + cam[i] = 1UL << camsize; + ram -= cam[i]; + __max_low_memory += cam[i]; + virt += cam[i]; + phys += cam[i]; + + p += sprintf(p, "%lu/", cam[i] >> 20); } + for (; i < ARRAY_SIZE(cam); i++) + p += sprintf(p, "0/"); + p[-1] = '\0'; - printk(KERN_INFO "Memory CAM mapping: CAM0=%ldMb, CAM1=%ldMb," - " CAM2=%ldMb residual: %ldMb\n", - __cam0 >> 20, __cam1 >> 20, __cam2 >> 20, - (long int)((total_lowmem - __cam0 - __cam1 - __cam2) - >> 20)); - __max_low_memory = __cam0 + __cam1 + __cam2; + pr_info("Memory CAM mapping: %s Mb, residual: %ldMb\n", buf, + (total_lowmem - __max_low_memory) >> 20); __initial_memory_limit_addr = memstart_addr + __max_low_memory; } diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c index f00f09a77f12..f668fa9ba804 100644 --- a/arch/powerpc/mm/mem.c +++ b/arch/powerpc/mm/mem.c @@ -472,40 +472,7 @@ void update_mmu_cache(struct vm_area_struct *vma, unsigned long address, { #ifdef CONFIG_PPC_STD_MMU unsigned long access = 0, trap; -#endif - unsigned long pfn = pte_pfn(pte); - - /* handle i-cache coherency */ - if (!cpu_has_feature(CPU_FTR_COHERENT_ICACHE) && - !cpu_has_feature(CPU_FTR_NOEXECUTE) && - pfn_valid(pfn)) { - struct page *page = pfn_to_page(pfn); -#ifdef CONFIG_8xx - /* On 8xx, cache control instructions (particularly - * "dcbst" from flush_dcache_icache) fault as write - * operation if there is an unpopulated TLB entry - * for the address in question. To workaround that, - * we invalidate the TLB here, thus avoiding dcbst - * misbehaviour. - */ - _tlbil_va(address, 0 /* 8xx doesn't care about PID */); -#endif - /* The _PAGE_USER test should really be _PAGE_EXEC, but - * older glibc versions execute some code from no-exec - * pages, which for now we are supporting. If exec-only - * pages are ever implemented, this will have to change. - */ - if (!PageReserved(page) && (pte_val(pte) & _PAGE_USER) - && !test_bit(PG_arch_1, &page->flags)) { - if (vma->vm_mm == current->active_mm) { - __flush_dcache_icache((void *) address); - } else - flush_dcache_icache_page(page); - set_bit(PG_arch_1, &page->flags); - } - } -#ifdef CONFIG_PPC_STD_MMU /* We only want HPTEs for linux PTEs that have _PAGE_ACCESSED set */ if (!pte_young(pte) || address >= TASK_SIZE) return; diff --git a/arch/powerpc/mm/mmap.c b/arch/powerpc/mm/mmap.c index 86010fc7d3b1..7db8abc01ef8 100644 --- a/arch/powerpc/mm/mmap.c +++ b/arch/powerpc/mm/mmap.c @@ -48,12 +48,6 @@ static inline unsigned long mmap_base(void) static inline int mmap_is_legacy(void) { - /* - * Force standard allocation for 64 bit programs. - */ - if (!test_thread_flag(TIF_32BIT)) - return 1; - if (current->personality & ADDR_COMPAT_LAYOUT) return 1; diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c index 5ac08b8ab654..0507faa65478 100644 --- a/arch/powerpc/mm/numa.c +++ b/arch/powerpc/mm/numa.c @@ -158,35 +158,6 @@ static void unmap_cpu_from_node(unsigned long cpu) } #endif /* CONFIG_HOTPLUG_CPU */ -static struct device_node * __cpuinit find_cpu_node(unsigned int cpu) -{ - unsigned int hw_cpuid = get_hard_smp_processor_id(cpu); - struct device_node *cpu_node = NULL; - const unsigned int *interrupt_server, *reg; - int len; - - while ((cpu_node = of_find_node_by_type(cpu_node, "cpu")) != NULL) { - /* Try interrupt server first */ - interrupt_server = of_get_property(cpu_node, - "ibm,ppc-interrupt-server#s", &len); - - len = len / sizeof(u32); - - if (interrupt_server && (len > 0)) { - while (len--) { - if (interrupt_server[len] == hw_cpuid) - return cpu_node; - } - } else { - reg = of_get_property(cpu_node, "reg", &len); - if (reg && (len > 0) && (reg[0] == hw_cpuid)) - return cpu_node; - } - } - - return NULL; -} - /* must hold reference to node during call */ static const int *of_get_associativity(struct device_node *dev) { @@ -290,7 +261,7 @@ static int __init find_min_common_depth(void) ref_points = of_get_property(rtas_root, "ibm,associativity-reference-points", &len); - if ((len >= 1) && ref_points) { + if ((len >= 2 * sizeof(unsigned int)) && ref_points) { depth = ref_points[1]; } else { dbg("NUMA: ibm,associativity-reference-points not found.\n"); @@ -470,7 +441,7 @@ static int of_drconf_to_nid_single(struct of_drconf_cell *drmem, static int __cpuinit numa_setup_cpu(unsigned long lcpu) { int nid = 0; - struct device_node *cpu = find_cpu_node(lcpu); + struct device_node *cpu = of_get_cpu_node(lcpu, NULL); if (!cpu) { WARN_ON(1); @@ -652,7 +623,7 @@ static int __init parse_numa_properties(void) for_each_present_cpu(i) { int nid; - cpu = find_cpu_node(i); + cpu = of_get_cpu_node(i, NULL); BUG_ON(!cpu); nid = of_node_to_nid_single(cpu); of_node_put(cpu); diff --git a/arch/powerpc/mm/pgtable.c b/arch/powerpc/mm/pgtable.c index 6d94116fdea1..a27ded3adac5 100644 --- a/arch/powerpc/mm/pgtable.c +++ b/arch/powerpc/mm/pgtable.c @@ -1,5 +1,6 @@ /* * This file contains common routines for dealing with free of page tables + * Along with common page table handling code * * Derived from arch/powerpc/mm/tlb_64.c: * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) @@ -115,3 +116,133 @@ void pte_free_finish(void) pte_free_submit(*batchp); *batchp = NULL; } + +/* + * Handle i/d cache flushing, called from set_pte_at() or ptep_set_access_flags() + */ +static pte_t do_dcache_icache_coherency(pte_t pte) +{ + unsigned long pfn = pte_pfn(pte); + struct page *page; + + if (unlikely(!pfn_valid(pfn))) + return pte; + page = pfn_to_page(pfn); + + if (!PageReserved(page) && !test_bit(PG_arch_1, &page->flags)) { + pr_debug("do_dcache_icache_coherency... flushing\n"); + flush_dcache_icache_page(page); + set_bit(PG_arch_1, &page->flags); + } + else + pr_debug("do_dcache_icache_coherency... already clean\n"); + return __pte(pte_val(pte) | _PAGE_HWEXEC); +} + +static inline int is_exec_fault(void) +{ + return current->thread.regs && TRAP(current->thread.regs) == 0x400; +} + +/* We only try to do i/d cache coherency on stuff that looks like + * reasonably "normal" PTEs. We currently require a PTE to be present + * and we avoid _PAGE_SPECIAL and _PAGE_NO_CACHE + */ +static inline int pte_looks_normal(pte_t pte) +{ + return (pte_val(pte) & + (_PAGE_PRESENT | _PAGE_SPECIAL | _PAGE_NO_CACHE)) == + (_PAGE_PRESENT); +} + +#if defined(CONFIG_PPC_STD_MMU) +/* Server-style MMU handles coherency when hashing if HW exec permission + * is supposed per page (currently 64-bit only). Else, we always flush + * valid PTEs in set_pte. + */ +static inline int pte_need_exec_flush(pte_t pte, int set_pte) +{ + return set_pte && pte_looks_normal(pte) && + !(cpu_has_feature(CPU_FTR_COHERENT_ICACHE) || + cpu_has_feature(CPU_FTR_NOEXECUTE)); +} +#elif _PAGE_HWEXEC == 0 +/* Embedded type MMU without HW exec support (8xx only so far), we flush + * the cache for any present PTE + */ +static inline int pte_need_exec_flush(pte_t pte, int set_pte) +{ + return set_pte && pte_looks_normal(pte); +} +#else +/* Other embedded CPUs with HW exec support per-page, we flush on exec + * fault if HWEXEC is not set + */ +static inline int pte_need_exec_flush(pte_t pte, int set_pte) +{ + return pte_looks_normal(pte) && is_exec_fault() && + !(pte_val(pte) & _PAGE_HWEXEC); +} +#endif + +/* + * set_pte stores a linux PTE into the linux page table. + */ +void set_pte_at(struct mm_struct *mm, unsigned long addr, pte_t *ptep, pte_t pte) +{ +#ifdef CONFIG_DEBUG_VM + WARN_ON(pte_present(*ptep)); +#endif + /* Note: mm->context.id might not yet have been assigned as + * this context might not have been activated yet when this + * is called. + */ + pte = __pte(pte_val(pte) & ~_PAGE_HPTEFLAGS); + if (pte_need_exec_flush(pte, 1)) + pte = do_dcache_icache_coherency(pte); + + /* Perform the setting of the PTE */ + __set_pte_at(mm, addr, ptep, pte, 0); +} + +/* + * This is called when relaxing access to a PTE. It's also called in the page + * fault path when we don't hit any of the major fault cases, ie, a minor + * update of _PAGE_ACCESSED, _PAGE_DIRTY, etc... The generic code will have + * handled those two for us, we additionally deal with missing execute + * permission here on some processors + */ +int ptep_set_access_flags(struct vm_area_struct *vma, unsigned long address, + pte_t *ptep, pte_t entry, int dirty) +{ + int changed; + if (!dirty && pte_need_exec_flush(entry, 0)) + entry = do_dcache_icache_coherency(entry); + changed = !pte_same(*(ptep), entry); + if (changed) { + assert_pte_locked(vma->vm_mm, address); + __ptep_set_access_flags(ptep, entry); + flush_tlb_page_nohash(vma, address); + } + return changed; +} + +#ifdef CONFIG_DEBUG_VM +void assert_pte_locked(struct mm_struct *mm, unsigned long addr) +{ + pgd_t *pgd; + pud_t *pud; + pmd_t *pmd; + + if (mm == &init_mm) + return; + pgd = mm->pgd + pgd_index(addr); + BUG_ON(pgd_none(*pgd)); + pud = pud_offset(pgd, addr); + BUG_ON(pud_none(*pud)); + pmd = pmd_offset(pud, addr); + BUG_ON(!pmd_present(*pmd)); + BUG_ON(!spin_is_locked(pte_lockptr(mm, pmd))); +} +#endif /* CONFIG_DEBUG_VM */ + diff --git a/arch/powerpc/platforms/52xx/Kconfig b/arch/powerpc/platforms/52xx/Kconfig index 696a5ee4962d..0465e5b36e6a 100644 --- a/arch/powerpc/platforms/52xx/Kconfig +++ b/arch/powerpc/platforms/52xx/Kconfig @@ -21,7 +21,12 @@ config PPC_MPC5200_SIMPLE and if there is a PCI bus node defined in the device tree. Boards that are compatible with this generic platform support - are: 'tqc,tqm5200', 'promess,motionpro', 'schindler,cm5200'. + are: + intercontrol,digsy-mtc + phytec,pcm030 + promess,motionpro + schindler,cm5200 + tqc,tqm5200 config PPC_EFIKA bool "bPlan Efika 5k2. MPC5200B based computer" @@ -35,6 +40,11 @@ config PPC_LITE5200 depends on PPC_MPC52xx select DEFAULT_UIMAGE +config PPC_MEDIA5200 + bool "Freescale Media5200 Eval Board" + depends on PPC_MPC52xx + select DEFAULT_UIMAGE + config PPC_MPC5200_BUGFIX bool "MPC5200 (L25R) bugfix support" depends on PPC_MPC52xx diff --git a/arch/powerpc/platforms/52xx/Makefile b/arch/powerpc/platforms/52xx/Makefile index b8a52062738a..bfd4f52cf3dd 100644 --- a/arch/powerpc/platforms/52xx/Makefile +++ b/arch/powerpc/platforms/52xx/Makefile @@ -1,12 +1,13 @@ # # Makefile for 52xx based boards # -obj-y += mpc52xx_pic.o mpc52xx_common.o +obj-y += mpc52xx_pic.o mpc52xx_common.o mpc52xx_gpt.o obj-$(CONFIG_PCI) += mpc52xx_pci.o obj-$(CONFIG_PPC_MPC5200_SIMPLE) += mpc5200_simple.o obj-$(CONFIG_PPC_EFIKA) += efika.o obj-$(CONFIG_PPC_LITE5200) += lite5200.o +obj-$(CONFIG_PPC_MEDIA5200) += media5200.o obj-$(CONFIG_PM) += mpc52xx_sleep.o mpc52xx_pm.o ifeq ($(CONFIG_PPC_LITE5200),y) diff --git a/arch/powerpc/platforms/52xx/media5200.c b/arch/powerpc/platforms/52xx/media5200.c new file mode 100644 index 000000000000..68e4f1696d14 --- /dev/null +++ b/arch/powerpc/platforms/52xx/media5200.c @@ -0,0 +1,273 @@ +/* + * Support for 'media5200-platform' compatible boards. + * + * Copyright (C) 2008 Secret Lab Technologies Ltd. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * Description: + * This code implements support for the Freescape Media5200 platform + * (built around the MPC5200 SoC). + * + * Notable characteristic of the Media5200 is the presence of an FPGA + * that has all external IRQ lines routed through it. This file implements + * a cascaded interrupt controller driver which attaches itself to the + * Virtual IRQ subsystem after the primary mpc5200 interrupt controller + * is initialized. + * + */ + +#undef DEBUG + +#include <linux/irq.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <asm/time.h> +#include <asm/prom.h> +#include <asm/machdep.h> +#include <asm/mpc52xx.h> + +static struct of_device_id mpc5200_gpio_ids[] __initdata = { + { .compatible = "fsl,mpc5200-gpio", }, + { .compatible = "mpc5200-gpio", }, + {} +}; + +/* FPGA register set */ +#define MEDIA5200_IRQ_ENABLE (0x40c) +#define MEDIA5200_IRQ_STATUS (0x410) +#define MEDIA5200_NUM_IRQS (6) +#define MEDIA5200_IRQ_SHIFT (32 - MEDIA5200_NUM_IRQS) + +struct media5200_irq { + void __iomem *regs; + spinlock_t lock; + struct irq_host *irqhost; +}; +struct media5200_irq media5200_irq; + +static void media5200_irq_unmask(unsigned int virq) +{ + unsigned long flags; + u32 val; + + spin_lock_irqsave(&media5200_irq.lock, flags); + val = in_be32(media5200_irq.regs + MEDIA5200_IRQ_ENABLE); + val |= 1 << (MEDIA5200_IRQ_SHIFT + irq_map[virq].hwirq); + out_be32(media5200_irq.regs + MEDIA5200_IRQ_ENABLE, val); + spin_unlock_irqrestore(&media5200_irq.lock, flags); +} + +static void media5200_irq_mask(unsigned int virq) +{ + unsigned long flags; + u32 val; + + spin_lock_irqsave(&media5200_irq.lock, flags); + val = in_be32(media5200_irq.regs + MEDIA5200_IRQ_ENABLE); + val &= ~(1 << (MEDIA5200_IRQ_SHIFT + irq_map[virq].hwirq)); + out_be32(media5200_irq.regs + MEDIA5200_IRQ_ENABLE, val); + spin_unlock_irqrestore(&media5200_irq.lock, flags); +} + +static struct irq_chip media5200_irq_chip = { + .typename = "Media5200 FPGA", + .unmask = media5200_irq_unmask, + .mask = media5200_irq_mask, + .mask_ack = media5200_irq_mask, +}; + +void media5200_irq_cascade(unsigned int virq, struct irq_desc *desc) +{ + int sub_virq, val; + u32 status, enable; + + /* Mask off the cascaded IRQ */ + spin_lock(&desc->lock); + desc->chip->mask(virq); + spin_unlock(&desc->lock); + + /* Ask the FPGA for IRQ status. If 'val' is 0, then no irqs + * are pending. 'ffs()' is 1 based */ + status = in_be32(media5200_irq.regs + MEDIA5200_IRQ_ENABLE); + enable = in_be32(media5200_irq.regs + MEDIA5200_IRQ_STATUS); + val = ffs((status & enable) >> MEDIA5200_IRQ_SHIFT); + if (val) { + sub_virq = irq_linear_revmap(media5200_irq.irqhost, val - 1); + /* pr_debug("%s: virq=%i s=%.8x e=%.8x hwirq=%i subvirq=%i\n", + * __func__, virq, status, enable, val - 1, sub_virq); + */ + generic_handle_irq(sub_virq); + } + + /* Processing done; can reenable the cascade now */ + spin_lock(&desc->lock); + desc->chip->ack(virq); + if (!(desc->status & IRQ_DISABLED)) + desc->chip->unmask(virq); + spin_unlock(&desc->lock); +} + +static int media5200_irq_map(struct irq_host *h, unsigned int virq, + irq_hw_number_t hw) +{ + struct irq_desc *desc = get_irq_desc(virq); + + pr_debug("%s: h=%p, virq=%i, hwirq=%i\n", __func__, h, virq, (int)hw); + set_irq_chip_data(virq, &media5200_irq); + set_irq_chip_and_handler(virq, &media5200_irq_chip, handle_level_irq); + set_irq_type(virq, IRQ_TYPE_LEVEL_LOW); + desc->status &= ~(IRQ_TYPE_SENSE_MASK | IRQ_LEVEL); + desc->status |= IRQ_TYPE_LEVEL_LOW | IRQ_LEVEL; + + return 0; +} + +static int media5200_irq_xlate(struct irq_host *h, struct device_node *ct, + u32 *intspec, unsigned int intsize, + irq_hw_number_t *out_hwirq, + unsigned int *out_flags) +{ + if (intsize != 2) + return -1; + + pr_debug("%s: bank=%i, number=%i\n", __func__, intspec[0], intspec[1]); + *out_hwirq = intspec[1]; + *out_flags = IRQ_TYPE_NONE; + return 0; +} + +static struct irq_host_ops media5200_irq_ops = { + .map = media5200_irq_map, + .xlate = media5200_irq_xlate, +}; + +/* + * Setup Media5200 IRQ mapping + */ +static void __init media5200_init_irq(void) +{ + struct device_node *fpga_np; + int cascade_virq; + + /* First setup the regular MPC5200 interrupt controller */ + mpc52xx_init_irq(); + + /* Now find the FPGA IRQ */ + fpga_np = of_find_compatible_node(NULL, NULL, "fsl,media5200-fpga"); + if (!fpga_np) + goto out; + pr_debug("%s: found fpga node: %s\n", __func__, fpga_np->full_name); + + media5200_irq.regs = of_iomap(fpga_np, 0); + if (!media5200_irq.regs) + goto out; + pr_debug("%s: mapped to %p\n", __func__, media5200_irq.regs); + + cascade_virq = irq_of_parse_and_map(fpga_np, 0); + if (!cascade_virq) + goto out; + pr_debug("%s: cascaded on virq=%i\n", __func__, cascade_virq); + + /* Disable all FPGA IRQs */ + out_be32(media5200_irq.regs + MEDIA5200_IRQ_ENABLE, 0); + + spin_lock_init(&media5200_irq.lock); + + media5200_irq.irqhost = irq_alloc_host(fpga_np, IRQ_HOST_MAP_LINEAR, + MEDIA5200_NUM_IRQS, + &media5200_irq_ops, -1); + if (!media5200_irq.irqhost) + goto out; + pr_debug("%s: allocated irqhost\n", __func__); + + media5200_irq.irqhost->host_data = &media5200_irq; + + set_irq_data(cascade_virq, &media5200_irq); + set_irq_chained_handler(cascade_virq, media5200_irq_cascade); + + return; + + out: + pr_err("Could not find Media5200 FPGA; PCI interrupts will not work\n"); +} + +/* + * Setup the architecture + */ +static void __init media5200_setup_arch(void) +{ + + struct device_node *np; + struct mpc52xx_gpio __iomem *gpio; + u32 port_config; + + if (ppc_md.progress) + ppc_md.progress("media5200_setup_arch()", 0); + + /* Map important registers from the internal memory map */ + mpc52xx_map_common_devices(); + + /* Some mpc5200 & mpc5200b related configuration */ + mpc5200_setup_xlb_arbiter(); + + mpc52xx_setup_pci(); + + np = of_find_matching_node(NULL, mpc5200_gpio_ids); + gpio = of_iomap(np, 0); + of_node_put(np); + if (!gpio) { + printk(KERN_ERR "%s() failed. expect abnormal behavior\n", + __func__); + return; + } + + /* Set port config */ + port_config = in_be32(&gpio->port_config); + + port_config &= ~0x03000000; /* ATA CS is on csb_4/5 */ + port_config |= 0x01000000; + + out_be32(&gpio->port_config, port_config); + + /* Unmap zone */ + iounmap(gpio); + +} + +/* list of the supported boards */ +static char *board[] __initdata = { + "fsl,media5200", + NULL +}; + +/* + * Called very early, MMU is off, device-tree isn't unflattened + */ +static int __init media5200_probe(void) +{ + unsigned long node = of_get_flat_dt_root(); + int i = 0; + + while (board[i]) { + if (of_flat_dt_is_compatible(node, board[i])) + break; + i++; + } + + return (board[i] != NULL); +} + +define_machine(media5200_platform) { + .name = "media5200-platform", + .probe = media5200_probe, + .setup_arch = media5200_setup_arch, + .init = mpc52xx_declare_of_platform_devices, + .init_IRQ = media5200_init_irq, + .get_irq = mpc52xx_get_irq, + .restart = mpc52xx_restart, + .calibrate_decr = generic_calibrate_decr, +}; diff --git a/arch/powerpc/platforms/52xx/mpc5200_simple.c b/arch/powerpc/platforms/52xx/mpc5200_simple.c index a3bda0b9f1ff..d5e1471e51f7 100644 --- a/arch/powerpc/platforms/52xx/mpc5200_simple.c +++ b/arch/powerpc/platforms/52xx/mpc5200_simple.c @@ -50,6 +50,7 @@ static void __init mpc5200_simple_setup_arch(void) /* list of the supported boards */ static char *board[] __initdata = { + "intercontrol,digsy-mtc", "promess,motionpro", "phytec,pcm030", "schindler,cm5200", diff --git a/arch/powerpc/platforms/52xx/mpc52xx_gpio.c b/arch/powerpc/platforms/52xx/mpc52xx_gpio.c index 07f89ae46d04..2b8d8ef32e4e 100644 --- a/arch/powerpc/platforms/52xx/mpc52xx_gpio.c +++ b/arch/powerpc/platforms/52xx/mpc52xx_gpio.c @@ -354,88 +354,6 @@ static struct of_platform_driver mpc52xx_simple_gpiochip_driver = { .remove = mpc52xx_gpiochip_remove, }; -/* - * GPIO LIB API implementation for gpt GPIOs. - * - * Each gpt only has a single GPIO. - */ -static int mpc52xx_gpt_gpio_get(struct gpio_chip *gc, unsigned int gpio) -{ - struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); - struct mpc52xx_gpt __iomem *regs = mm_gc->regs; - - return (in_be32(®s->status) & (1 << (31 - 23))) ? 1 : 0; -} - -static void -mpc52xx_gpt_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val) -{ - struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); - struct mpc52xx_gpt __iomem *regs = mm_gc->regs; - - if (val) - out_be32(®s->mode, 0x34); - else - out_be32(®s->mode, 0x24); - - pr_debug("%s: gpio: %d val: %d\n", __func__, gpio, val); -} - -static int mpc52xx_gpt_gpio_dir_in(struct gpio_chip *gc, unsigned int gpio) -{ - struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); - struct mpc52xx_gpt __iomem *regs = mm_gc->regs; - - out_be32(®s->mode, 0x04); - - return 0; -} - -static int -mpc52xx_gpt_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val) -{ - mpc52xx_gpt_gpio_set(gc, gpio, val); - pr_debug("%s: gpio: %d val: %d\n", __func__, gpio, val); - - return 0; -} - -static int __devinit mpc52xx_gpt_gpiochip_probe(struct of_device *ofdev, - const struct of_device_id *match) -{ - struct of_mm_gpio_chip *mmchip; - struct of_gpio_chip *chip; - - mmchip = kzalloc(sizeof(*mmchip), GFP_KERNEL); - if (!mmchip) - return -ENOMEM; - - chip = &mmchip->of_gc; - - chip->gpio_cells = 2; - chip->gc.ngpio = 1; - chip->gc.direction_input = mpc52xx_gpt_gpio_dir_in; - chip->gc.direction_output = mpc52xx_gpt_gpio_dir_out; - chip->gc.get = mpc52xx_gpt_gpio_get; - chip->gc.set = mpc52xx_gpt_gpio_set; - - return of_mm_gpiochip_add(ofdev->node, mmchip); -} - -static const struct of_device_id mpc52xx_gpt_gpiochip_match[] = { - { - .compatible = "fsl,mpc5200-gpt-gpio", - }, - {} -}; - -static struct of_platform_driver mpc52xx_gpt_gpiochip_driver = { - .name = "gpio_gpt", - .match_table = mpc52xx_gpt_gpiochip_match, - .probe = mpc52xx_gpt_gpiochip_probe, - .remove = mpc52xx_gpiochip_remove, -}; - static int __init mpc52xx_gpio_init(void) { if (of_register_platform_driver(&mpc52xx_wkup_gpiochip_driver)) @@ -444,9 +362,6 @@ static int __init mpc52xx_gpio_init(void) if (of_register_platform_driver(&mpc52xx_simple_gpiochip_driver)) printk(KERN_ERR "Unable to register simple GPIO driver\n"); - if (of_register_platform_driver(&mpc52xx_gpt_gpiochip_driver)) - printk(KERN_ERR "Unable to register gpt GPIO driver\n"); - return 0; } diff --git a/arch/powerpc/platforms/52xx/mpc52xx_gpt.c b/arch/powerpc/platforms/52xx/mpc52xx_gpt.c new file mode 100644 index 000000000000..cb038dc67a85 --- /dev/null +++ b/arch/powerpc/platforms/52xx/mpc52xx_gpt.c @@ -0,0 +1,435 @@ +/* + * MPC5200 General Purpose Timer device driver + * + * Copyright (c) 2009 Secret Lab Technologies Ltd. + * Copyright (c) 2008 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This file is a driver for the the General Purpose Timer (gpt) devices + * found on the MPC5200 SoC. Each timer has an IO pin which can be used + * for GPIO or can be used to raise interrupts. The timer function can + * be used independently from the IO pin, or it can be used to control + * output signals or measure input signals. + * + * This driver supports the GPIO and IRQ controller functions of the GPT + * device. Timer functions are not yet supported, nor is the watchdog + * timer. + * + * To use the GPIO function, the following two properties must be added + * to the device tree node for the gpt device (typically in the .dts file + * for the board): + * gpio-controller; + * #gpio-cells = < 2 >; + * This driver will register the GPIO pin if it finds the gpio-controller + * property in the device tree. + * + * To use the IRQ controller function, the following two properties must + * be added to the device tree node for the gpt device: + * interrupt-controller; + * #interrupt-cells = < 1 >; + * The IRQ controller binding only uses one cell to specify the interrupt, + * and the IRQ flags are encoded in the cell. A cell is not used to encode + * the IRQ number because the GPT only has a single IRQ source. For flags, + * a value of '1' means rising edge sensitive and '2' means falling edge. + * + * The GPIO and the IRQ controller functions can be used at the same time, + * but in this use case the IO line will only work as an input. Trying to + * use it as a GPIO output will not work. + * + * When using the GPIO line as an output, it can either be driven as normal + * IO, or it can be an Open Collector (OC) output. At the moment it is the + * responsibility of either the bootloader or the platform setup code to set + * the output mode. This driver does not change the output mode setting. + */ + +#include <linux/irq.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/of.h> +#include <linux/of_platform.h> +#include <linux/of_gpio.h> +#include <linux/kernel.h> +#include <asm/mpc52xx.h> + +MODULE_DESCRIPTION("Freescale MPC52xx gpt driver"); +MODULE_AUTHOR("Sascha Hauer, Grant Likely"); +MODULE_LICENSE("GPL"); + +/** + * struct mpc52xx_gpt - Private data structure for MPC52xx GPT driver + * @dev: pointer to device structure + * @regs: virtual address of GPT registers + * @lock: spinlock to coordinate between different functions. + * @of_gc: of_gpio_chip instance structure; used when GPIO is enabled + * @irqhost: Pointer to irq_host instance; used when IRQ mode is supported + */ +struct mpc52xx_gpt_priv { + struct device *dev; + struct mpc52xx_gpt __iomem *regs; + spinlock_t lock; + struct irq_host *irqhost; + +#if defined(CONFIG_GPIOLIB) + struct of_gpio_chip of_gc; +#endif +}; + +#define MPC52xx_GPT_MODE_MS_MASK (0x07) +#define MPC52xx_GPT_MODE_MS_IC (0x01) +#define MPC52xx_GPT_MODE_MS_OC (0x02) +#define MPC52xx_GPT_MODE_MS_PWM (0x03) +#define MPC52xx_GPT_MODE_MS_GPIO (0x04) + +#define MPC52xx_GPT_MODE_GPIO_MASK (0x30) +#define MPC52xx_GPT_MODE_GPIO_OUT_LOW (0x20) +#define MPC52xx_GPT_MODE_GPIO_OUT_HIGH (0x30) + +#define MPC52xx_GPT_MODE_IRQ_EN (0x0100) + +#define MPC52xx_GPT_MODE_ICT_MASK (0x030000) +#define MPC52xx_GPT_MODE_ICT_RISING (0x010000) +#define MPC52xx_GPT_MODE_ICT_FALLING (0x020000) +#define MPC52xx_GPT_MODE_ICT_TOGGLE (0x030000) + +#define MPC52xx_GPT_STATUS_IRQMASK (0x000f) + +/* --------------------------------------------------------------------- + * Cascaded interrupt controller hooks + */ + +static void mpc52xx_gpt_irq_unmask(unsigned int virq) +{ + struct mpc52xx_gpt_priv *gpt = get_irq_chip_data(virq); + unsigned long flags; + + spin_lock_irqsave(&gpt->lock, flags); + setbits32(&gpt->regs->mode, MPC52xx_GPT_MODE_IRQ_EN); + spin_unlock_irqrestore(&gpt->lock, flags); +} + +static void mpc52xx_gpt_irq_mask(unsigned int virq) +{ + struct mpc52xx_gpt_priv *gpt = get_irq_chip_data(virq); + unsigned long flags; + + spin_lock_irqsave(&gpt->lock, flags); + clrbits32(&gpt->regs->mode, MPC52xx_GPT_MODE_IRQ_EN); + spin_unlock_irqrestore(&gpt->lock, flags); +} + +static void mpc52xx_gpt_irq_ack(unsigned int virq) +{ + struct mpc52xx_gpt_priv *gpt = get_irq_chip_data(virq); + + out_be32(&gpt->regs->status, MPC52xx_GPT_STATUS_IRQMASK); +} + +static int mpc52xx_gpt_irq_set_type(unsigned int virq, unsigned int flow_type) +{ + struct mpc52xx_gpt_priv *gpt = get_irq_chip_data(virq); + unsigned long flags; + u32 reg; + + dev_dbg(gpt->dev, "%s: virq=%i type=%x\n", __func__, virq, flow_type); + + spin_lock_irqsave(&gpt->lock, flags); + reg = in_be32(&gpt->regs->mode) & ~MPC52xx_GPT_MODE_ICT_MASK; + if (flow_type & IRQF_TRIGGER_RISING) + reg |= MPC52xx_GPT_MODE_ICT_RISING; + if (flow_type & IRQF_TRIGGER_FALLING) + reg |= MPC52xx_GPT_MODE_ICT_FALLING; + out_be32(&gpt->regs->mode, reg); + spin_unlock_irqrestore(&gpt->lock, flags); + + return 0; +} + +static struct irq_chip mpc52xx_gpt_irq_chip = { + .typename = "MPC52xx GPT", + .unmask = mpc52xx_gpt_irq_unmask, + .mask = mpc52xx_gpt_irq_mask, + .ack = mpc52xx_gpt_irq_ack, + .set_type = mpc52xx_gpt_irq_set_type, +}; + +void mpc52xx_gpt_irq_cascade(unsigned int virq, struct irq_desc *desc) +{ + struct mpc52xx_gpt_priv *gpt = get_irq_data(virq); + int sub_virq; + u32 status; + + status = in_be32(&gpt->regs->status) & MPC52xx_GPT_STATUS_IRQMASK; + if (status) { + sub_virq = irq_linear_revmap(gpt->irqhost, 0); + generic_handle_irq(sub_virq); + } +} + +static int mpc52xx_gpt_irq_map(struct irq_host *h, unsigned int virq, + irq_hw_number_t hw) +{ + struct mpc52xx_gpt_priv *gpt = h->host_data; + + dev_dbg(gpt->dev, "%s: h=%p, virq=%i\n", __func__, h, virq); + set_irq_chip_data(virq, gpt); + set_irq_chip_and_handler(virq, &mpc52xx_gpt_irq_chip, handle_edge_irq); + + return 0; +} + +static int mpc52xx_gpt_irq_xlate(struct irq_host *h, struct device_node *ct, + u32 *intspec, unsigned int intsize, + irq_hw_number_t *out_hwirq, + unsigned int *out_flags) +{ + struct mpc52xx_gpt_priv *gpt = h->host_data; + + dev_dbg(gpt->dev, "%s: flags=%i\n", __func__, intspec[0]); + + if ((intsize < 1) || (intspec[0] < 1) || (intspec[0] > 3)) { + dev_err(gpt->dev, "bad irq specifier in %s\n", ct->full_name); + return -EINVAL; + } + + *out_hwirq = 0; /* The GPT only has 1 IRQ line */ + *out_flags = intspec[0]; + + return 0; +} + +static struct irq_host_ops mpc52xx_gpt_irq_ops = { + .map = mpc52xx_gpt_irq_map, + .xlate = mpc52xx_gpt_irq_xlate, +}; + +static void +mpc52xx_gpt_irq_setup(struct mpc52xx_gpt_priv *gpt, struct device_node *node) +{ + int cascade_virq; + unsigned long flags; + + /* Only setup cascaded IRQ if device tree claims the GPT is + * an interrupt controller */ + if (!of_find_property(node, "interrupt-controller", NULL)) + return; + + cascade_virq = irq_of_parse_and_map(node, 0); + + gpt->irqhost = irq_alloc_host(node, IRQ_HOST_MAP_LINEAR, 1, + &mpc52xx_gpt_irq_ops, -1); + if (!gpt->irqhost) { + dev_err(gpt->dev, "irq_alloc_host() failed\n"); + return; + } + + gpt->irqhost->host_data = gpt; + + set_irq_data(cascade_virq, gpt); + set_irq_chained_handler(cascade_virq, mpc52xx_gpt_irq_cascade); + + /* Set to Input Capture mode */ + spin_lock_irqsave(&gpt->lock, flags); + clrsetbits_be32(&gpt->regs->mode, MPC52xx_GPT_MODE_MS_MASK, + MPC52xx_GPT_MODE_MS_IC); + spin_unlock_irqrestore(&gpt->lock, flags); + + dev_dbg(gpt->dev, "%s() complete. virq=%i\n", __func__, cascade_virq); +} + + +/* --------------------------------------------------------------------- + * GPIOLIB hooks + */ +#if defined(CONFIG_GPIOLIB) +static inline struct mpc52xx_gpt_priv *gc_to_mpc52xx_gpt(struct gpio_chip *gc) +{ + return container_of(to_of_gpio_chip(gc), struct mpc52xx_gpt_priv,of_gc); +} + +static int mpc52xx_gpt_gpio_get(struct gpio_chip *gc, unsigned int gpio) +{ + struct mpc52xx_gpt_priv *gpt = gc_to_mpc52xx_gpt(gc); + + return (in_be32(&gpt->regs->status) >> 8) & 1; +} + +static void +mpc52xx_gpt_gpio_set(struct gpio_chip *gc, unsigned int gpio, int v) +{ + struct mpc52xx_gpt_priv *gpt = gc_to_mpc52xx_gpt(gc); + unsigned long flags; + u32 r; + + dev_dbg(gpt->dev, "%s: gpio:%d v:%d\n", __func__, gpio, v); + r = v ? MPC52xx_GPT_MODE_GPIO_OUT_HIGH : MPC52xx_GPT_MODE_GPIO_OUT_LOW; + + spin_lock_irqsave(&gpt->lock, flags); + clrsetbits_be32(&gpt->regs->mode, MPC52xx_GPT_MODE_GPIO_MASK, r); + spin_unlock_irqrestore(&gpt->lock, flags); +} + +static int mpc52xx_gpt_gpio_dir_in(struct gpio_chip *gc, unsigned int gpio) +{ + struct mpc52xx_gpt_priv *gpt = gc_to_mpc52xx_gpt(gc); + unsigned long flags; + + dev_dbg(gpt->dev, "%s: gpio:%d\n", __func__, gpio); + + spin_lock_irqsave(&gpt->lock, flags); + clrbits32(&gpt->regs->mode, MPC52xx_GPT_MODE_GPIO_MASK); + spin_unlock_irqrestore(&gpt->lock, flags); + + return 0; +} + +static int +mpc52xx_gpt_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val) +{ + mpc52xx_gpt_gpio_set(gc, gpio, val); + return 0; +} + +static void +mpc52xx_gpt_gpio_setup(struct mpc52xx_gpt_priv *gpt, struct device_node *node) +{ + int rc; + + /* Only setup GPIO if the device tree claims the GPT is + * a GPIO controller */ + if (!of_find_property(node, "gpio-controller", NULL)) + return; + + gpt->of_gc.gc.label = kstrdup(node->full_name, GFP_KERNEL); + if (!gpt->of_gc.gc.label) { + dev_err(gpt->dev, "out of memory\n"); + return; + } + + gpt->of_gc.gpio_cells = 2; + gpt->of_gc.gc.ngpio = 1; + gpt->of_gc.gc.direction_input = mpc52xx_gpt_gpio_dir_in; + gpt->of_gc.gc.direction_output = mpc52xx_gpt_gpio_dir_out; + gpt->of_gc.gc.get = mpc52xx_gpt_gpio_get; + gpt->of_gc.gc.set = mpc52xx_gpt_gpio_set; + gpt->of_gc.gc.base = -1; + gpt->of_gc.xlate = of_gpio_simple_xlate; + node->data = &gpt->of_gc; + of_node_get(node); + + /* Setup external pin in GPIO mode */ + clrsetbits_be32(&gpt->regs->mode, MPC52xx_GPT_MODE_MS_MASK, + MPC52xx_GPT_MODE_MS_GPIO); + + rc = gpiochip_add(&gpt->of_gc.gc); + if (rc) + dev_err(gpt->dev, "gpiochip_add() failed; rc=%i\n", rc); + + dev_dbg(gpt->dev, "%s() complete.\n", __func__); +} +#else /* defined(CONFIG_GPIOLIB) */ +static void +mpc52xx_gpt_gpio_setup(struct mpc52xx_gpt_priv *p, struct device_node *np) { } +#endif /* defined(CONFIG_GPIOLIB) */ + +/*********************************************************************** + * SYSFS attributes + */ +#if defined(CONFIG_SYSFS) +static ssize_t mpc52xx_gpt_show_regs(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct mpc52xx_gpt_priv *gpt = dev_get_drvdata(dev); + int i, len = 0; + u32 __iomem *regs = (void __iomem *) gpt->regs; + + for (i = 0; i < 4; i++) + len += sprintf(buf + len, "%.8x ", in_be32(regs + i)); + len += sprintf(buf + len, "\n"); + + return len; +} + +static struct device_attribute mpc52xx_gpt_attrib[] = { + __ATTR(regs, S_IRUGO | S_IWUSR, mpc52xx_gpt_show_regs, NULL), +}; + +static void mpc52xx_gpt_create_attribs(struct mpc52xx_gpt_priv *gpt) +{ + int i, err = 0; + + for (i = 0; i < ARRAY_SIZE(mpc52xx_gpt_attrib); i++) { + err = device_create_file(gpt->dev, &mpc52xx_gpt_attrib[i]); + if (err) + dev_err(gpt->dev, "error creating attribute %i\n", i); + } + +} + +#else /* defined(CONFIG_SYSFS) */ +static void mpc52xx_gpt_create_attribs(struct mpc52xx_gpt_priv *) { return 0; } +#endif /* defined(CONFIG_SYSFS) */ + +/* --------------------------------------------------------------------- + * of_platform bus binding code + */ +static int __devinit mpc52xx_gpt_probe(struct of_device *ofdev, + const struct of_device_id *match) +{ + struct mpc52xx_gpt_priv *gpt; + + gpt = kzalloc(sizeof *gpt, GFP_KERNEL); + if (!gpt) + return -ENOMEM; + + spin_lock_init(&gpt->lock); + gpt->dev = &ofdev->dev; + gpt->regs = of_iomap(ofdev->node, 0); + if (!gpt->regs) { + kfree(gpt); + return -ENOMEM; + } + + dev_set_drvdata(&ofdev->dev, gpt); + + mpc52xx_gpt_create_attribs(gpt); + mpc52xx_gpt_gpio_setup(gpt, ofdev->node); + mpc52xx_gpt_irq_setup(gpt, ofdev->node); + + return 0; +} + +static int mpc52xx_gpt_remove(struct of_device *ofdev) +{ + return -EBUSY; +} + +static const struct of_device_id mpc52xx_gpt_match[] = { + { .compatible = "fsl,mpc5200-gpt", }, + + /* Depreciated compatible values; don't use for new dts files */ + { .compatible = "fsl,mpc5200-gpt-gpio", }, + { .compatible = "mpc5200-gpt", }, + {} +}; + +static struct of_platform_driver mpc52xx_gpt_driver = { + .name = "mpc52xx-gpt", + .match_table = mpc52xx_gpt_match, + .probe = mpc52xx_gpt_probe, + .remove = mpc52xx_gpt_remove, +}; + +static int __init mpc52xx_gpt_init(void) +{ + if (of_register_platform_driver(&mpc52xx_gpt_driver)) + pr_err("error registering MPC52xx GPT driver\n"); + + return 0; +} + +/* Make sure GPIOs and IRQs get set up before anyone tries to use them */ +subsys_initcall(mpc52xx_gpt_init); diff --git a/arch/powerpc/platforms/52xx/mpc52xx_pic.c b/arch/powerpc/platforms/52xx/mpc52xx_pic.c index 0a093f03c758..480f806fd0a9 100644 --- a/arch/powerpc/platforms/52xx/mpc52xx_pic.c +++ b/arch/powerpc/platforms/52xx/mpc52xx_pic.c @@ -163,8 +163,6 @@ static void mpc52xx_extirq_mask(unsigned int virq) irq = irq_map[virq].hwirq; l2irq = irq & MPC52xx_IRQ_L2_MASK; - pr_debug("%s: irq=%x. l2=%d\n", __func__, irq, l2irq); - io_be_clrbit(&intr->ctrl, 11 - l2irq); } @@ -176,8 +174,6 @@ static void mpc52xx_extirq_unmask(unsigned int virq) irq = irq_map[virq].hwirq; l2irq = irq & MPC52xx_IRQ_L2_MASK; - pr_debug("%s: irq=%x. l2=%d\n", __func__, irq, l2irq); - io_be_setbit(&intr->ctrl, 11 - l2irq); } @@ -189,17 +185,15 @@ static void mpc52xx_extirq_ack(unsigned int virq) irq = irq_map[virq].hwirq; l2irq = irq & MPC52xx_IRQ_L2_MASK; - pr_debug("%s: irq=%x. l2=%d\n", __func__, irq, l2irq); - io_be_setbit(&intr->ctrl, 27-l2irq); } static int mpc52xx_extirq_set_type(unsigned int virq, unsigned int flow_type) { - struct irq_desc *desc = get_irq_desc(virq); u32 ctrl_reg, type; int irq; int l2irq; + void *handler = handle_level_irq; irq = irq_map[virq].hwirq; l2irq = irq & MPC52xx_IRQ_L2_MASK; @@ -207,32 +201,21 @@ static int mpc52xx_extirq_set_type(unsigned int virq, unsigned int flow_type) pr_debug("%s: irq=%x. l2=%d flow_type=%d\n", __func__, irq, l2irq, flow_type); switch (flow_type) { - case IRQF_TRIGGER_HIGH: - type = 0; - break; - case IRQF_TRIGGER_RISING: - type = 1; - break; - case IRQF_TRIGGER_FALLING: - type = 2; - break; - case IRQF_TRIGGER_LOW: - type = 3; - break; + case IRQF_TRIGGER_HIGH: type = 0; break; + case IRQF_TRIGGER_RISING: type = 1; handler = handle_edge_irq; break; + case IRQF_TRIGGER_FALLING: type = 2; handler = handle_edge_irq; break; + case IRQF_TRIGGER_LOW: type = 3; break; default: type = 0; } - desc->status &= ~(IRQ_TYPE_SENSE_MASK | IRQ_LEVEL); - desc->status |= flow_type & IRQ_TYPE_SENSE_MASK; - if (flow_type & (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) - desc->status |= IRQ_LEVEL; - ctrl_reg = in_be32(&intr->ctrl); ctrl_reg &= ~(0x3 << (22 - (l2irq * 2))); ctrl_reg |= (type << (22 - (l2irq * 2))); out_be32(&intr->ctrl, ctrl_reg); + __set_irq_handler_unlocked(virq, handler); + return 0; } @@ -247,6 +230,11 @@ static struct irq_chip mpc52xx_extirq_irqchip = { /* * Main interrupt irq_chip */ +static int mpc52xx_null_set_type(unsigned int virq, unsigned int flow_type) +{ + return 0; /* Do nothing so that the sense mask will get updated */ +} + static void mpc52xx_main_mask(unsigned int virq) { int irq; @@ -255,8 +243,6 @@ static void mpc52xx_main_mask(unsigned int virq) irq = irq_map[virq].hwirq; l2irq = irq & MPC52xx_IRQ_L2_MASK; - pr_debug("%s: irq=%x. l2=%d\n", __func__, irq, l2irq); - io_be_setbit(&intr->main_mask, 16 - l2irq); } @@ -268,8 +254,6 @@ static void mpc52xx_main_unmask(unsigned int virq) irq = irq_map[virq].hwirq; l2irq = irq & MPC52xx_IRQ_L2_MASK; - pr_debug("%s: irq=%x. l2=%d\n", __func__, irq, l2irq); - io_be_clrbit(&intr->main_mask, 16 - l2irq); } @@ -278,6 +262,7 @@ static struct irq_chip mpc52xx_main_irqchip = { .mask = mpc52xx_main_mask, .mask_ack = mpc52xx_main_mask, .unmask = mpc52xx_main_unmask, + .set_type = mpc52xx_null_set_type, }; /* @@ -291,8 +276,6 @@ static void mpc52xx_periph_mask(unsigned int virq) irq = irq_map[virq].hwirq; l2irq = irq & MPC52xx_IRQ_L2_MASK; - pr_debug("%s: irq=%x. l2=%d\n", __func__, irq, l2irq); - io_be_setbit(&intr->per_mask, 31 - l2irq); } @@ -304,8 +287,6 @@ static void mpc52xx_periph_unmask(unsigned int virq) irq = irq_map[virq].hwirq; l2irq = irq & MPC52xx_IRQ_L2_MASK; - pr_debug("%s: irq=%x. l2=%d\n", __func__, irq, l2irq); - io_be_clrbit(&intr->per_mask, 31 - l2irq); } @@ -314,6 +295,7 @@ static struct irq_chip mpc52xx_periph_irqchip = { .mask = mpc52xx_periph_mask, .mask_ack = mpc52xx_periph_mask, .unmask = mpc52xx_periph_unmask, + .set_type = mpc52xx_null_set_type, }; /* @@ -327,8 +309,6 @@ static void mpc52xx_sdma_mask(unsigned int virq) irq = irq_map[virq].hwirq; l2irq = irq & MPC52xx_IRQ_L2_MASK; - pr_debug("%s: irq=%x. l2=%d\n", __func__, irq, l2irq); - io_be_setbit(&sdma->IntMask, l2irq); } @@ -340,8 +320,6 @@ static void mpc52xx_sdma_unmask(unsigned int virq) irq = irq_map[virq].hwirq; l2irq = irq & MPC52xx_IRQ_L2_MASK; - pr_debug("%s: irq=%x. l2=%d\n", __func__, irq, l2irq); - io_be_clrbit(&sdma->IntMask, l2irq); } @@ -353,8 +331,6 @@ static void mpc52xx_sdma_ack(unsigned int virq) irq = irq_map[virq].hwirq; l2irq = irq & MPC52xx_IRQ_L2_MASK; - pr_debug("%s: irq=%x. l2=%d\n", __func__, irq, l2irq); - out_be32(&sdma->IntPend, 1 << l2irq); } @@ -363,9 +339,19 @@ static struct irq_chip mpc52xx_sdma_irqchip = { .mask = mpc52xx_sdma_mask, .unmask = mpc52xx_sdma_unmask, .ack = mpc52xx_sdma_ack, + .set_type = mpc52xx_null_set_type, }; /** + * mpc52xx_is_extirq - Returns true if hwirq number is for an external IRQ + */ +static int mpc52xx_is_extirq(int l1, int l2) +{ + return ((l1 == 0) && (l2 == 0)) || + ((l1 == 1) && (l2 >= 1) && (l2 <= 3)); +} + +/** * mpc52xx_irqhost_xlate - translate virq# from device tree interrupts property */ static int mpc52xx_irqhost_xlate(struct irq_host *h, struct device_node *ct, @@ -383,38 +369,23 @@ static int mpc52xx_irqhost_xlate(struct irq_host *h, struct device_node *ct, intrvect_l1 = (int)intspec[0]; intrvect_l2 = (int)intspec[1]; - intrvect_type = (int)intspec[2]; + intrvect_type = (int)intspec[2] & 0x3; intrvect_linux = (intrvect_l1 << MPC52xx_IRQ_L1_OFFSET) & MPC52xx_IRQ_L1_MASK; intrvect_linux |= intrvect_l2 & MPC52xx_IRQ_L2_MASK; - pr_debug("return %x, l1=%d, l2=%d\n", intrvect_linux, intrvect_l1, - intrvect_l2); - *out_hwirq = intrvect_linux; - *out_flags = mpc52xx_map_senses[intrvect_type]; + *out_flags = IRQ_TYPE_LEVEL_LOW; + if (mpc52xx_is_extirq(intrvect_l1, intrvect_l2)) + *out_flags = mpc52xx_map_senses[intrvect_type]; + pr_debug("return %x, l1=%d, l2=%d\n", intrvect_linux, intrvect_l1, + intrvect_l2); return 0; } /** - * mpc52xx_irqx_gettype - determine the IRQ sense type (level/edge) - * - * Only external IRQs need this. - */ -static int mpc52xx_irqx_gettype(int irq) -{ - int type; - u32 ctrl_reg; - - ctrl_reg = in_be32(&intr->ctrl); - type = (ctrl_reg >> (22 - irq * 2)) & 0x3; - - return mpc52xx_map_senses[type]; -} - -/** * mpc52xx_irqhost_map - Hook to map from virq to an irq_chip structure */ static int mpc52xx_irqhost_map(struct irq_host *h, unsigned int virq, @@ -422,68 +393,46 @@ static int mpc52xx_irqhost_map(struct irq_host *h, unsigned int virq, { int l1irq; int l2irq; - struct irq_chip *good_irqchip; - void *good_handle; + struct irq_chip *irqchip; + void *hndlr; int type; + u32 reg; l1irq = (irq & MPC52xx_IRQ_L1_MASK) >> MPC52xx_IRQ_L1_OFFSET; l2irq = irq & MPC52xx_IRQ_L2_MASK; /* - * Most of ours IRQs will be level low - * Only external IRQs on some platform may be others + * External IRQs are handled differently by the hardware so they are + * handled by a dedicated irq_chip structure. */ - type = IRQ_TYPE_LEVEL_LOW; + if (mpc52xx_is_extirq(l1irq, l2irq)) { + reg = in_be32(&intr->ctrl); + type = mpc52xx_map_senses[(reg >> (22 - l2irq * 2)) & 0x3]; + if ((type == IRQ_TYPE_EDGE_FALLING) || + (type == IRQ_TYPE_EDGE_RISING)) + hndlr = handle_edge_irq; + else + hndlr = handle_level_irq; + + set_irq_chip_and_handler(virq, &mpc52xx_extirq_irqchip, hndlr); + pr_debug("%s: External IRQ%i virq=%x, hw=%x. type=%x\n", + __func__, l2irq, virq, (int)irq, type); + return 0; + } + /* It is an internal SOC irq. Choose the correct irq_chip */ switch (l1irq) { - case MPC52xx_IRQ_L1_CRIT: - pr_debug("%s: Critical. l2=%x\n", __func__, l2irq); - - BUG_ON(l2irq != 0); - - type = mpc52xx_irqx_gettype(l2irq); - good_irqchip = &mpc52xx_extirq_irqchip; - break; - - case MPC52xx_IRQ_L1_MAIN: - pr_debug("%s: Main IRQ[1-3] l2=%x\n", __func__, l2irq); - - if ((l2irq >= 1) && (l2irq <= 3)) { - type = mpc52xx_irqx_gettype(l2irq); - good_irqchip = &mpc52xx_extirq_irqchip; - } else { - good_irqchip = &mpc52xx_main_irqchip; - } - break; - - case MPC52xx_IRQ_L1_PERP: - pr_debug("%s: Peripherals. l2=%x\n", __func__, l2irq); - good_irqchip = &mpc52xx_periph_irqchip; - break; - - case MPC52xx_IRQ_L1_SDMA: - pr_debug("%s: SDMA. l2=%x\n", __func__, l2irq); - good_irqchip = &mpc52xx_sdma_irqchip; - break; - + case MPC52xx_IRQ_L1_MAIN: irqchip = &mpc52xx_main_irqchip; break; + case MPC52xx_IRQ_L1_PERP: irqchip = &mpc52xx_periph_irqchip; break; + case MPC52xx_IRQ_L1_SDMA: irqchip = &mpc52xx_sdma_irqchip; break; default: - pr_err("%s: invalid virq requested (0x%x)\n", __func__, virq); + pr_err("%s: invalid irq: virq=%i, l1=%i, l2=%i\n", + __func__, virq, l1irq, l2irq); return -EINVAL; } - switch (type) { - case IRQ_TYPE_EDGE_FALLING: - case IRQ_TYPE_EDGE_RISING: - good_handle = handle_edge_irq; - break; - default: - good_handle = handle_level_irq; - } - - set_irq_chip_and_handler(virq, good_irqchip, good_handle); - - pr_debug("%s: virq=%x, hw=%x. type=%x\n", __func__, virq, - (int)irq, type); + set_irq_chip_and_handler(virq, irqchip, handle_level_irq); + pr_debug("%s: virq=%x, l1=%i, l2=%i\n", __func__, virq, l1irq, l2irq); return 0; } @@ -522,6 +471,8 @@ void __init mpc52xx_init_irq(void) panic(__FILE__ ": find_and_map failed on 'mpc5200-bestcomm'. " "Check node !"); + pr_debug("MPC5200 IRQ controller mapped to 0x%p\n", intr); + /* Disable all interrupt sources. */ out_be32(&sdma->IntPend, 0xffffffff); /* 1 means clear pending */ out_be32(&sdma->IntMask, 0xffffffff); /* 1 means disabled */ @@ -613,8 +564,5 @@ unsigned int mpc52xx_get_irq(void) } } - pr_debug("%s: irq=%x. virq=%d\n", __func__, irq, - irq_linear_revmap(mpc52xx_irqhost, irq)); - return irq_linear_revmap(mpc52xx_irqhost, irq); } diff --git a/arch/powerpc/platforms/83xx/mpc831x_rdb.c b/arch/powerpc/platforms/83xx/mpc831x_rdb.c index 91a2c80b9d72..0b4f883b20eb 100644 --- a/arch/powerpc/platforms/83xx/mpc831x_rdb.c +++ b/arch/powerpc/platforms/83xx/mpc831x_rdb.c @@ -38,6 +38,8 @@ static void __init mpc831x_rdb_setup_arch(void) #ifdef CONFIG_PCI for_each_compatible_node(np, "pci", "fsl,mpc8349-pci") mpc83xx_add_bridge(np); + for_each_compatible_node(np, "pci", "fsl,mpc8314-pcie") + mpc83xx_add_bridge(np); #endif mpc831x_usb_cfg(); } diff --git a/arch/powerpc/platforms/83xx/mpc837x_mds.c b/arch/powerpc/platforms/83xx/mpc837x_mds.c index 530ef990ca7c..634785cc4523 100644 --- a/arch/powerpc/platforms/83xx/mpc837x_mds.c +++ b/arch/powerpc/platforms/83xx/mpc837x_mds.c @@ -84,14 +84,10 @@ static void __init mpc837x_mds_setup_arch(void) ppc_md.progress("mpc837x_mds_setup_arch()", 0); #ifdef CONFIG_PCI - for_each_compatible_node(np, "pci", "fsl,mpc8349-pci") { - if (!of_device_is_available(np)) { - pr_warning("%s: disabled by the firmware.\n", - np->full_name); - continue; - } + for_each_compatible_node(np, "pci", "fsl,mpc8349-pci") + mpc83xx_add_bridge(np); + for_each_compatible_node(np, "pci", "fsl,mpc8314-pcie") mpc83xx_add_bridge(np); - } #endif mpc837xmds_usb_cfg(); } diff --git a/arch/powerpc/platforms/83xx/mpc837x_rdb.c b/arch/powerpc/platforms/83xx/mpc837x_rdb.c index 1d096545322b..3d7b953d40e1 100644 --- a/arch/powerpc/platforms/83xx/mpc837x_rdb.c +++ b/arch/powerpc/platforms/83xx/mpc837x_rdb.c @@ -38,6 +38,8 @@ static void __init mpc837x_rdb_setup_arch(void) #ifdef CONFIG_PCI for_each_compatible_node(np, "pci", "fsl,mpc8349-pci") mpc83xx_add_bridge(np); + for_each_compatible_node(np, "pci", "fsl,mpc8314-pcie") + mpc83xx_add_bridge(np); #endif mpc837x_usb_cfg(); } diff --git a/arch/powerpc/platforms/86xx/Kconfig b/arch/powerpc/platforms/86xx/Kconfig index 8e5693935975..fa276c689cf9 100644 --- a/arch/powerpc/platforms/86xx/Kconfig +++ b/arch/powerpc/platforms/86xx/Kconfig @@ -31,6 +31,14 @@ config MPC8610_HPCD help This option enables support for the MPC8610 HPCD board. +config GEF_SBC310 + bool "GE Fanuc SBC310" + select DEFAULT_UIMAGE + select GENERIC_GPIO + select ARCH_REQUIRE_GPIOLIB + help + This option enables support for GE Fanuc's SBC310. + config GEF_SBC610 bool "GE Fanuc SBC610" select DEFAULT_UIMAGE @@ -48,7 +56,7 @@ config MPC8641 select FSL_PCI if PCI select PPC_UDBG_16550 select MPIC - default y if MPC8641_HPCN || SBC8641D || GEF_SBC610 + default y if MPC8641_HPCN || SBC8641D || GEF_SBC610 || GEF_SBC310 config MPC8610 bool diff --git a/arch/powerpc/platforms/86xx/Makefile b/arch/powerpc/platforms/86xx/Makefile index 31e540c2ebbc..7c080da4523a 100644 --- a/arch/powerpc/platforms/86xx/Makefile +++ b/arch/powerpc/platforms/86xx/Makefile @@ -9,3 +9,4 @@ obj-$(CONFIG_SBC8641D) += sbc8641d.o obj-$(CONFIG_MPC8610_HPCD) += mpc8610_hpcd.o gef-gpio-$(CONFIG_GPIOLIB) += gef_gpio.o obj-$(CONFIG_GEF_SBC610) += gef_sbc610.o gef_pic.o $(gef-gpio-y) +obj-$(CONFIG_GEF_SBC310) += gef_sbc310.o gef_pic.o $(gef-gpio-y) diff --git a/arch/powerpc/platforms/86xx/gef_gpio.c b/arch/powerpc/platforms/86xx/gef_gpio.c index 85b2800f4cb7..b2ea8875adba 100644 --- a/arch/powerpc/platforms/86xx/gef_gpio.c +++ b/arch/powerpc/platforms/86xx/gef_gpio.c @@ -37,8 +37,6 @@ #define GEF_GPIO_OVERRUN 0x1C #define GEF_GPIO_MODE 0x20 -#define NUM_GPIO 19 - static void _gef_gpio_set(void __iomem *reg, unsigned int offset, int value) { unsigned int data; @@ -103,10 +101,10 @@ static void gef_gpio_set(struct gpio_chip *chip, unsigned offset, int value) static int __init gef_gpio_init(void) { struct device_node *np; + int retval; + struct of_mm_gpio_chip *gef_gpio_chip; for_each_compatible_node(np, NULL, "gef,sbc610-gpio") { - int retval; - struct of_mm_gpio_chip *gef_gpio_chip; pr_debug("%s: Initialising GEF GPIO\n", np->full_name); @@ -120,7 +118,35 @@ static int __init gef_gpio_init(void) /* Setup pointers to chip functions */ gef_gpio_chip->of_gc.gpio_cells = 2; - gef_gpio_chip->of_gc.gc.ngpio = NUM_GPIO; + gef_gpio_chip->of_gc.gc.ngpio = 19; + gef_gpio_chip->of_gc.gc.direction_input = gef_gpio_dir_in; + gef_gpio_chip->of_gc.gc.direction_output = gef_gpio_dir_out; + gef_gpio_chip->of_gc.gc.get = gef_gpio_get; + gef_gpio_chip->of_gc.gc.set = gef_gpio_set; + + /* This function adds a memory mapped GPIO chip */ + retval = of_mm_gpiochip_add(np, gef_gpio_chip); + if (retval) { + kfree(gef_gpio_chip); + pr_err("%s: Unable to add GPIO\n", np->full_name); + } + } + + for_each_compatible_node(np, NULL, "gef,sbc310-gpio") { + + pr_debug("%s: Initialising GEF GPIO\n", np->full_name); + + /* Allocate chip structure */ + gef_gpio_chip = kzalloc(sizeof(*gef_gpio_chip), GFP_KERNEL); + if (!gef_gpio_chip) { + pr_err("%s: Unable to allocate structure\n", + np->full_name); + continue; + } + + /* Setup pointers to chip functions */ + gef_gpio_chip->of_gc.gpio_cells = 2; + gef_gpio_chip->of_gc.gc.ngpio = 6; gef_gpio_chip->of_gc.gc.direction_input = gef_gpio_dir_in; gef_gpio_chip->of_gc.gc.direction_output = gef_gpio_dir_out; gef_gpio_chip->of_gc.gc.get = gef_gpio_get; diff --git a/arch/powerpc/platforms/86xx/gef_sbc310.c b/arch/powerpc/platforms/86xx/gef_sbc310.c new file mode 100644 index 000000000000..0f20172af84b --- /dev/null +++ b/arch/powerpc/platforms/86xx/gef_sbc310.c @@ -0,0 +1,230 @@ +/* + * GE Fanuc SBC310 board support + * + * Author: Martyn Welch <martyn.welch@gefanuc.com> + * + * Copyright 2008 GE Fanuc Intelligent Platforms Embedded Systems, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * Based on: mpc86xx_hpcn.c (MPC86xx HPCN board specific routines) + * Copyright 2006 Freescale Semiconductor Inc. + * + * NEC fixup adapted from arch/mips/pci/fixup-lm2e.c + */ + +#include <linux/stddef.h> +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/kdev_t.h> +#include <linux/delay.h> +#include <linux/seq_file.h> +#include <linux/of_platform.h> + +#include <asm/system.h> +#include <asm/time.h> +#include <asm/machdep.h> +#include <asm/pci-bridge.h> +#include <asm/mpc86xx.h> +#include <asm/prom.h> +#include <mm/mmu_decl.h> +#include <asm/udbg.h> + +#include <asm/mpic.h> + +#include <sysdev/fsl_pci.h> +#include <sysdev/fsl_soc.h> + +#include "mpc86xx.h" +#include "gef_pic.h" + +#undef DEBUG + +#ifdef DEBUG +#define DBG (fmt...) do { printk(KERN_ERR "SBC310: " fmt); } while (0) +#else +#define DBG (fmt...) do { } while (0) +#endif + +void __iomem *sbc310_regs; + +static void __init gef_sbc310_init_irq(void) +{ + struct device_node *cascade_node = NULL; + + mpc86xx_init_irq(); + + /* + * There is a simple interrupt handler in the main FPGA, this needs + * to be cascaded into the MPIC + */ + cascade_node = of_find_compatible_node(NULL, NULL, "gef,fpga-pic"); + if (!cascade_node) { + printk(KERN_WARNING "SBC310: No FPGA PIC\n"); + return; + } + + gef_pic_init(cascade_node); + of_node_put(cascade_node); +} + +static void __init gef_sbc310_setup_arch(void) +{ + struct device_node *regs; +#ifdef CONFIG_PCI + struct device_node *np; + + for_each_compatible_node(np, "pci", "fsl,mpc8641-pcie") { + fsl_add_bridge(np, 1); + } +#endif + + printk(KERN_INFO "GE Fanuc Intelligent Platforms SBC310 6U VPX SBC\n"); + +#ifdef CONFIG_SMP + mpc86xx_smp_init(); +#endif + + /* Remap basic board registers */ + regs = of_find_compatible_node(NULL, NULL, "gef,fpga-regs"); + if (regs) { + sbc310_regs = of_iomap(regs, 0); + if (sbc310_regs == NULL) + printk(KERN_WARNING "Unable to map board registers\n"); + of_node_put(regs); + } +} + +/* Return the PCB revision */ +static unsigned int gef_sbc310_get_board_id(void) +{ + unsigned int reg; + + reg = ioread32(sbc310_regs); + return reg & 0xff; +} + +/* Return the PCB revision */ +static unsigned int gef_sbc310_get_pcb_rev(void) +{ + unsigned int reg; + + reg = ioread32(sbc310_regs); + return (reg >> 8) & 0xff; +} + +/* Return the board (software) revision */ +static unsigned int gef_sbc310_get_board_rev(void) +{ + unsigned int reg; + + reg = ioread32(sbc310_regs); + return (reg >> 16) & 0xff; +} + +/* Return the FPGA revision */ +static unsigned int gef_sbc310_get_fpga_rev(void) +{ + unsigned int reg; + + reg = ioread32(sbc310_regs); + return (reg >> 24) & 0xf; +} + +static void gef_sbc310_show_cpuinfo(struct seq_file *m) +{ + uint svid = mfspr(SPRN_SVR); + + seq_printf(m, "Vendor\t\t: GE Fanuc Intelligent Platforms\n"); + + seq_printf(m, "Board ID\t: 0x%2.2x\n", gef_sbc310_get_board_id()); + seq_printf(m, "Revision\t: %u%c\n", gef_sbc310_get_pcb_rev(), + ('A' + gef_sbc310_get_board_rev() - 1)); + seq_printf(m, "FPGA Revision\t: %u\n", gef_sbc310_get_fpga_rev()); + + seq_printf(m, "SVR\t\t: 0x%x\n", svid); + +} + +static void __init gef_sbc310_nec_fixup(struct pci_dev *pdev) +{ + unsigned int val; + + printk(KERN_INFO "Running NEC uPD720101 Fixup\n"); + + /* Ensure only ports 1 & 2 are enabled */ + pci_read_config_dword(pdev, 0xe0, &val); + pci_write_config_dword(pdev, 0xe0, (val & ~7) | 0x2); + + /* System clock is 48-MHz Oscillator and EHCI Enabled. */ + pci_write_config_dword(pdev, 0xe4, 1 << 5); +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_USB, + gef_sbc310_nec_fixup); + +/* + * Called very early, device-tree isn't unflattened + * + * This function is called to determine whether the BSP is compatible with the + * supplied device-tree, which is assumed to be the correct one for the actual + * board. It is expected thati, in the future, a kernel may support multiple + * boards. + */ +static int __init gef_sbc310_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + if (of_flat_dt_is_compatible(root, "gef,sbc310")) + return 1; + + return 0; +} + +static long __init mpc86xx_time_init(void) +{ + unsigned int temp; + + /* Set the time base to zero */ + mtspr(SPRN_TBWL, 0); + mtspr(SPRN_TBWU, 0); + + temp = mfspr(SPRN_HID0); + temp |= HID0_TBEN; + mtspr(SPRN_HID0, temp); + asm volatile("isync"); + + return 0; +} + +static __initdata struct of_device_id of_bus_ids[] = { + { .compatible = "simple-bus", }, + {}, +}; + +static int __init declare_of_platform_devices(void) +{ + printk(KERN_DEBUG "Probe platform devices\n"); + of_platform_bus_probe(NULL, of_bus_ids, NULL); + + return 0; +} +machine_device_initcall(gef_sbc310, declare_of_platform_devices); + +define_machine(gef_sbc310) { + .name = "GE Fanuc SBC310", + .probe = gef_sbc310_probe, + .setup_arch = gef_sbc310_setup_arch, + .init_IRQ = gef_sbc310_init_irq, + .show_cpuinfo = gef_sbc310_show_cpuinfo, + .get_irq = mpic_get_irq, + .restart = fsl_rstcr_restart, + .time_init = mpc86xx_time_init, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +#ifdef CONFIG_PCI + .pcibios_fixup_bus = fsl_pcibios_fixup_bus, +#endif +}; diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig index 200b9cb900ea..b25404ca2216 100644 --- a/arch/powerpc/platforms/Kconfig +++ b/arch/powerpc/platforms/Kconfig @@ -28,6 +28,7 @@ source "arch/powerpc/platforms/86xx/Kconfig" source "arch/powerpc/platforms/embedded6xx/Kconfig" source "arch/powerpc/platforms/44x/Kconfig" source "arch/powerpc/platforms/40x/Kconfig" +source "arch/powerpc/platforms/amigaone/Kconfig" config PPC_NATIVE bool diff --git a/arch/powerpc/platforms/Makefile b/arch/powerpc/platforms/Makefile index 8079e0b4fd69..f7419198e635 100644 --- a/arch/powerpc/platforms/Makefile +++ b/arch/powerpc/platforms/Makefile @@ -19,3 +19,4 @@ obj-$(CONFIG_PPC_PASEMI) += pasemi/ obj-$(CONFIG_PPC_CELL) += cell/ obj-$(CONFIG_PPC_PS3) += ps3/ obj-$(CONFIG_EMBEDDED6xx) += embedded6xx/ +obj-$(CONFIG_AMIGAONE) += amigaone/ diff --git a/arch/powerpc/platforms/amigaone/Kconfig b/arch/powerpc/platforms/amigaone/Kconfig new file mode 100644 index 000000000000..9276a96cedee --- /dev/null +++ b/arch/powerpc/platforms/amigaone/Kconfig @@ -0,0 +1,18 @@ +config AMIGAONE + bool "Eyetech AmigaOne/MAI Teron" + depends on PPC32 && BROKEN_ON_SMP && PPC_MULTIPLATFORM + select PPC_I8259 + select PPC_INDIRECT_PCI + select PPC_UDBG_16550 + select PCI + select NOT_COHERENT_CACHE + select CHECK_CACHE_COHERENCY + select DEFAULT_UIMAGE + select PCSPKR_PLATFORM + help + Select AmigaOne for the following machines: + - AmigaOne SE/Teron CX (G3 only) + - AmigaOne XE/Teron PX + - uA1/Teron mini + More information is available at: + <http://amigaone-linux.sourceforge.net/>. diff --git a/arch/powerpc/platforms/amigaone/Makefile b/arch/powerpc/platforms/amigaone/Makefile new file mode 100644 index 000000000000..e6885b3b2ee7 --- /dev/null +++ b/arch/powerpc/platforms/amigaone/Makefile @@ -0,0 +1 @@ +obj-y += setup.o diff --git a/arch/powerpc/platforms/amigaone/setup.c b/arch/powerpc/platforms/amigaone/setup.c new file mode 100644 index 000000000000..443035366c12 --- /dev/null +++ b/arch/powerpc/platforms/amigaone/setup.c @@ -0,0 +1,170 @@ +/* + * AmigaOne platform setup + * + * Copyright 2008 Gerhard Pircher (gerhard_pircher@gmx.net) + * + * Based on original amigaone_setup.c source code + * Copyright 2003 by Hans-Joerg Frieden and Thomas Frieden + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/seq_file.h> +#include <linux/utsrelease.h> + +#include <asm/machdep.h> +#include <asm/cputable.h> +#include <asm/prom.h> +#include <asm/pci-bridge.h> +#include <asm/i8259.h> +#include <asm/time.h> +#include <asm/udbg.h> + +extern void __flush_disable_L1(void); + +void amigaone_show_cpuinfo(struct seq_file *m) +{ + seq_printf(m, "vendor\t\t: Eyetech Ltd.\n"); +} + +static int __init amigaone_add_bridge(struct device_node *dev) +{ + const u32 *cfg_addr, *cfg_data; + int len; + const int *bus_range; + struct pci_controller *hose; + + printk(KERN_INFO "Adding PCI host bridge %s\n", dev->full_name); + + cfg_addr = of_get_address(dev, 0, NULL, NULL); + cfg_data = of_get_address(dev, 1, NULL, NULL); + if ((cfg_addr == NULL) || (cfg_data == NULL)) + return -ENODEV; + + bus_range = of_get_property(dev, "bus-range", &len); + if ((bus_range == NULL) || (len < 2 * sizeof(int))) + printk(KERN_WARNING "Can't get bus-range for %s, assume" + " bus 0\n", dev->full_name); + + hose = pcibios_alloc_controller(dev); + if (hose == NULL) + return -ENOMEM; + + hose->first_busno = bus_range ? bus_range[0] : 0; + hose->last_busno = bus_range ? bus_range[1] : 0xff; + + setup_indirect_pci(hose, cfg_addr[0], cfg_data[0], 0); + + /* Interpret the "ranges" property */ + /* This also maps the I/O region and sets isa_io/mem_base */ + pci_process_bridge_OF_ranges(hose, dev, 1); + + return 0; +} + +void __init amigaone_setup_arch(void) +{ + struct device_node *np; + int phb = -ENODEV; + + /* Lookup PCI host bridges. */ + for_each_compatible_node(np, "pci", "mai-logic,articia-s") + phb = amigaone_add_bridge(np); + + BUG_ON(phb != 0); + + if (ppc_md.progress) + ppc_md.progress("Linux/PPC "UTS_RELEASE"\n", 0); +} + +void __init amigaone_init_IRQ(void) +{ + struct device_node *pic, *np = NULL; + const unsigned long *prop = NULL; + unsigned long int_ack = 0; + + /* Search for ISA interrupt controller. */ + pic = of_find_compatible_node(NULL, "interrupt-controller", + "pnpPNP,000"); + BUG_ON(pic == NULL); + + /* Look for interrupt acknowledge address in the PCI root node. */ + np = of_find_compatible_node(NULL, "pci", "mai-logic,articia-s"); + if (np) { + prop = of_get_property(np, "8259-interrupt-acknowledge", NULL); + if (prop) + int_ack = prop[0]; + of_node_put(np); + } + + if (int_ack == 0) + printk(KERN_WARNING "Cannot find PCI interrupt acknowledge" + " address, polling\n"); + + i8259_init(pic, int_ack); + ppc_md.get_irq = i8259_irq; + irq_set_default_host(i8259_get_host()); +} + +void __init amigaone_init(void) +{ + request_region(0x00, 0x20, "dma1"); + request_region(0x40, 0x20, "timer"); + request_region(0x80, 0x10, "dma page reg"); + request_region(0xc0, 0x20, "dma2"); +} + +void amigaone_restart(char *cmd) +{ + local_irq_disable(); + + /* Flush and disable caches. */ + __flush_disable_L1(); + + /* Set SRR0 to the reset vector and turn on MSR_IP. */ + mtspr(SPRN_SRR0, 0xfff00100); + mtspr(SPRN_SRR1, MSR_IP); + + /* Do an rfi to jump back to firmware. */ + __asm__ __volatile__("rfi" : : : "memory"); + + /* Not reached. */ + while (1); +} + +static int __init amigaone_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + if (of_flat_dt_is_compatible(root, "eyetech,amigaone")) { + /* + * Coherent memory access cause complete system lockup! Thus + * disable this CPU feature, even if the CPU needs it. + */ + cur_cpu_spec->cpu_features &= ~CPU_FTR_NEED_COHERENT; + + ISA_DMA_THRESHOLD = 0x00ffffff; + DMA_MODE_READ = 0x44; + DMA_MODE_WRITE = 0x48; + + return 1; + } + + return 0; +} + +define_machine(amigaone) { + .name = "AmigaOne", + .probe = amigaone_probe, + .setup_arch = amigaone_setup_arch, + .init = amigaone_init, + .show_cpuinfo = amigaone_show_cpuinfo, + .init_IRQ = amigaone_init_IRQ, + .restart = amigaone_restart, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +}; diff --git a/arch/powerpc/platforms/chrp/pegasos_eth.c b/arch/powerpc/platforms/chrp/pegasos_eth.c index 130ff72d99dd..039fc8e82199 100644 --- a/arch/powerpc/platforms/chrp/pegasos_eth.c +++ b/arch/powerpc/platforms/chrp/pegasos_eth.c @@ -21,8 +21,8 @@ #define PEGASOS2_SRAM_BASE (0xf2000000) #define PEGASOS2_SRAM_SIZE (256*1024) -#define PEGASOS2_SRAM_BASE_ETH0 (PEGASOS2_SRAM_BASE) -#define PEGASOS2_SRAM_BASE_ETH1 (PEGASOS2_SRAM_BASE_ETH0 + (PEGASOS2_SRAM_SIZE / 2) ) +#define PEGASOS2_SRAM_BASE_ETH_PORT0 (PEGASOS2_SRAM_BASE) +#define PEGASOS2_SRAM_BASE_ETH_PORT1 (PEGASOS2_SRAM_BASE_ETH_PORT0 + (PEGASOS2_SRAM_SIZE / 2) ) #define PEGASOS2_SRAM_RXRING_SIZE (PEGASOS2_SRAM_SIZE/4) @@ -47,75 +47,42 @@ static struct platform_device mv643xx_eth_shared_device = { .resource = mv643xx_eth_shared_resources, }; -static struct resource mv643xx_eth0_resources[] = { +static struct resource mv643xx_eth_port1_resources[] = { [0] = { - .name = "eth0 irq", + .name = "eth port1 irq", .start = 9, .end = 9, .flags = IORESOURCE_IRQ, }, }; - -static struct mv643xx_eth_platform_data eth0_pd = { - .shared = &mv643xx_eth_shared_device, - .port_number = 0, - - .tx_sram_addr = PEGASOS2_SRAM_BASE_ETH0, - .tx_sram_size = PEGASOS2_SRAM_TXRING_SIZE, - .tx_queue_size = PEGASOS2_SRAM_TXRING_SIZE/16, - - .rx_sram_addr = PEGASOS2_SRAM_BASE_ETH0 + PEGASOS2_SRAM_TXRING_SIZE, - .rx_sram_size = PEGASOS2_SRAM_RXRING_SIZE, - .rx_queue_size = PEGASOS2_SRAM_RXRING_SIZE/16, -}; - -static struct platform_device eth0_device = { - .name = MV643XX_ETH_NAME, - .id = 0, - .num_resources = ARRAY_SIZE(mv643xx_eth0_resources), - .resource = mv643xx_eth0_resources, - .dev = { - .platform_data = ð0_pd, - }, -}; - -static struct resource mv643xx_eth1_resources[] = { - [0] = { - .name = "eth1 irq", - .start = 9, - .end = 9, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct mv643xx_eth_platform_data eth1_pd = { +static struct mv643xx_eth_platform_data eth_port1_pd = { .shared = &mv643xx_eth_shared_device, .port_number = 1, + .phy_addr = MV643XX_ETH_PHY_ADDR(7), - .tx_sram_addr = PEGASOS2_SRAM_BASE_ETH1, + .tx_sram_addr = PEGASOS2_SRAM_BASE_ETH_PORT1, .tx_sram_size = PEGASOS2_SRAM_TXRING_SIZE, .tx_queue_size = PEGASOS2_SRAM_TXRING_SIZE/16, - .rx_sram_addr = PEGASOS2_SRAM_BASE_ETH1 + PEGASOS2_SRAM_TXRING_SIZE, + .rx_sram_addr = PEGASOS2_SRAM_BASE_ETH_PORT1 + PEGASOS2_SRAM_TXRING_SIZE, .rx_sram_size = PEGASOS2_SRAM_RXRING_SIZE, .rx_queue_size = PEGASOS2_SRAM_RXRING_SIZE/16, }; -static struct platform_device eth1_device = { +static struct platform_device eth_port1_device = { .name = MV643XX_ETH_NAME, .id = 1, - .num_resources = ARRAY_SIZE(mv643xx_eth1_resources), - .resource = mv643xx_eth1_resources, + .num_resources = ARRAY_SIZE(mv643xx_eth_port1_resources), + .resource = mv643xx_eth_port1_resources, .dev = { - .platform_data = ð1_pd, + .platform_data = ð_port1_pd, }, }; static struct platform_device *mv643xx_eth_pd_devs[] __initdata = { &mv643xx_eth_shared_device, - ð0_device, - ð1_device, + ð_port1_device, }; /***********/ @@ -191,15 +158,10 @@ static int __init mv643xx_eth_add_pds(void) if ( Enable_SRAM() < 0) { - eth0_pd.tx_sram_addr = 0; - eth0_pd.tx_sram_size = 0; - eth0_pd.rx_sram_addr = 0; - eth0_pd.rx_sram_size = 0; - - eth1_pd.tx_sram_addr = 0; - eth1_pd.tx_sram_size = 0; - eth1_pd.rx_sram_addr = 0; - eth1_pd.rx_sram_size = 0; + eth_port1_pd.tx_sram_addr = 0; + eth_port1_pd.tx_sram_size = 0; + eth_port1_pd.rx_sram_addr = 0; + eth_port1_pd.rx_sram_size = 0; #ifdef BE_VERBOSE printk("Pegasos II/Marvell MV64361: Can't enable the " diff --git a/arch/powerpc/platforms/pseries/eeh_driver.c b/arch/powerpc/platforms/pseries/eeh_driver.c index 0ad56ff7b4a0..380420f8c400 100644 --- a/arch/powerpc/platforms/pseries/eeh_driver.c +++ b/arch/powerpc/platforms/pseries/eeh_driver.c @@ -79,6 +79,40 @@ static int irq_in_use(unsigned int irq) return rc; } +/** + * eeh_disable_irq - disable interrupt for the recovering device + */ +static void eeh_disable_irq(struct pci_dev *dev) +{ + struct device_node *dn = pci_device_to_OF_node(dev); + + /* Don't disable MSI and MSI-X interrupts. They are + * effectively disabled by the DMA Stopped state + * when an EEH error occurs. + */ + if (dev->msi_enabled || dev->msix_enabled) + return; + + if (!irq_in_use(dev->irq)) + return; + + PCI_DN(dn)->eeh_mode |= EEH_MODE_IRQ_DISABLED; + disable_irq_nosync(dev->irq); +} + +/** + * eeh_enable_irq - enable interrupt for the recovering device + */ +static void eeh_enable_irq(struct pci_dev *dev) +{ + struct device_node *dn = pci_device_to_OF_node(dev); + + if ((PCI_DN(dn)->eeh_mode) & EEH_MODE_IRQ_DISABLED) { + PCI_DN(dn)->eeh_mode &= ~EEH_MODE_IRQ_DISABLED; + enable_irq(dev->irq); + } +} + /* ------------------------------------------------------- */ /** * eeh_report_error - report pci error to each device driver @@ -98,11 +132,8 @@ static void eeh_report_error(struct pci_dev *dev, void *userdata) if (!driver) return; - if (irq_in_use (dev->irq)) { - struct device_node *dn = pci_device_to_OF_node(dev); - PCI_DN(dn)->eeh_mode |= EEH_MODE_IRQ_DISABLED; - disable_irq_nosync(dev->irq); - } + eeh_disable_irq(dev); + if (!driver->err_handler || !driver->err_handler->error_detected) return; @@ -147,15 +178,12 @@ static void eeh_report_reset(struct pci_dev *dev, void *userdata) { enum pci_ers_result rc, *res = userdata; struct pci_driver *driver = dev->driver; - struct device_node *dn = pci_device_to_OF_node(dev); if (!driver) return; - if ((PCI_DN(dn)->eeh_mode) & EEH_MODE_IRQ_DISABLED) { - PCI_DN(dn)->eeh_mode &= ~EEH_MODE_IRQ_DISABLED; - enable_irq(dev->irq); - } + eeh_enable_irq(dev); + if (!driver->err_handler || !driver->err_handler->slot_reset) return; @@ -174,17 +202,14 @@ static void eeh_report_reset(struct pci_dev *dev, void *userdata) static void eeh_report_resume(struct pci_dev *dev, void *userdata) { struct pci_driver *driver = dev->driver; - struct device_node *dn = pci_device_to_OF_node(dev); dev->error_state = pci_channel_io_normal; if (!driver) return; - if ((PCI_DN(dn)->eeh_mode) & EEH_MODE_IRQ_DISABLED) { - PCI_DN(dn)->eeh_mode &= ~EEH_MODE_IRQ_DISABLED; - enable_irq(dev->irq); - } + eeh_enable_irq(dev); + if (!driver->err_handler || !driver->err_handler->resume) return; @@ -208,15 +233,12 @@ static void eeh_report_failure(struct pci_dev *dev, void *userdata) if (!driver) return; - if (irq_in_use (dev->irq)) { - struct device_node *dn = pci_device_to_OF_node(dev); - PCI_DN(dn)->eeh_mode |= EEH_MODE_IRQ_DISABLED; - disable_irq_nosync(dev->irq); - } - if (!driver->err_handler) - return; - if (!driver->err_handler->error_detected) + eeh_disable_irq(dev); + + if (!driver->err_handler || + !driver->err_handler->error_detected) return; + driver->err_handler->error_detected(dev, pci_channel_io_perm_failure); } diff --git a/arch/powerpc/platforms/pseries/msi.c b/arch/powerpc/platforms/pseries/msi.c index f15222bbe136..073b518338a3 100644 --- a/arch/powerpc/platforms/pseries/msi.c +++ b/arch/powerpc/platforms/pseries/msi.c @@ -71,11 +71,13 @@ static int rtas_change_msi(struct pci_dn *pdn, u32 func, u32 num_irqs) } while (rtas_busy_delay(rc)); /* - * If the RTAS call succeeded, check the number of irqs is actually - * what we asked for. If not, return an error. + * If the RTAS call succeeded, return the number of irqs allocated. + * If not, make sure we return a negative error code. */ - if (rc == 0 && rtas_ret[0] != num_irqs) - rc = -ENOSPC; + if (rc == 0) + rc = rtas_ret[0]; + else if (rc > 0) + rc = -rc; pr_debug("rtas_msi: ibm,change_msi(func=%d,num=%d), got %d rc = %d\n", func, num_irqs, rtas_ret[0], rc); @@ -91,7 +93,7 @@ static void rtas_disable_msi(struct pci_dev *pdev) if (!pdn) return; - if (rtas_change_msi(pdn, RTAS_CHANGE_FN, 0)) + if (rtas_change_msi(pdn, RTAS_CHANGE_FN, 0) != 0) pr_debug("rtas_msi: Setting MSIs to 0 failed!\n"); } @@ -132,7 +134,7 @@ static void rtas_teardown_msi_irqs(struct pci_dev *pdev) rtas_disable_msi(pdev); } -static int check_req_msi(struct pci_dev *pdev, int nvec) +static int check_req(struct pci_dev *pdev, int nvec, char *prop_name) { struct device_node *dn; struct pci_dn *pdn; @@ -144,24 +146,34 @@ static int check_req_msi(struct pci_dev *pdev, int nvec) dn = pdn->node; - req_msi = of_get_property(dn, "ibm,req#msi", NULL); + req_msi = of_get_property(dn, prop_name, NULL); if (!req_msi) { - pr_debug("rtas_msi: No ibm,req#msi on %s\n", dn->full_name); + pr_debug("rtas_msi: No %s on %s\n", prop_name, dn->full_name); return -ENOENT; } if (*req_msi < nvec) { - pr_debug("rtas_msi: ibm,req#msi requests < %d MSIs\n", nvec); + pr_debug("rtas_msi: %s requests < %d MSIs\n", prop_name, nvec); return -ENOSPC; } return 0; } +static int check_req_msi(struct pci_dev *pdev, int nvec) +{ + return check_req(pdev, nvec, "ibm,req#msi"); +} + +static int check_req_msix(struct pci_dev *pdev, int nvec) +{ + return check_req(pdev, nvec, "ibm,req#msi-x"); +} + static int rtas_msi_check_device(struct pci_dev *pdev, int nvec, int type) { if (type == PCI_CAP_ID_MSIX) - pr_debug("rtas_msi: MSI-X untested, trying anyway.\n"); + return check_req_msix(pdev, nvec); return check_req_msi(pdev, nvec); } @@ -185,21 +197,21 @@ static int rtas_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type) if (type == PCI_CAP_ID_MSI) { rc = rtas_change_msi(pdn, RTAS_CHANGE_MSI_FN, nvec); - if (rc) { + if (rc < 0) { pr_debug("rtas_msi: trying the old firmware call.\n"); rc = rtas_change_msi(pdn, RTAS_CHANGE_FN, nvec); } } else rc = rtas_change_msi(pdn, RTAS_CHANGE_MSIX_FN, nvec); - if (rc) { + if (rc != nvec) { pr_debug("rtas_msi: rtas_change_msi() failed\n"); return rc; } i = 0; list_for_each_entry(entry, &pdev->msi_list, list) { - hwirq = rtas_query_irq_number(pdn, i); + hwirq = rtas_query_irq_number(pdn, i++); if (hwirq < 0) { pr_debug("rtas_msi: error (%d) getting hwirq\n", rc); return hwirq; @@ -234,8 +246,8 @@ static void rtas_msi_pci_irq_fixup(struct pci_dev *pdev) } /* No MSI -> MSIs can't have been assigned by fw, leave LSI */ - if (check_req_msi(pdev, 1)) { - dev_dbg(&pdev->dev, "rtas_msi: no req#msi, nothing to do.\n"); + if (check_req_msi(pdev, 1) && check_req_msix(pdev, 1)) { + dev_dbg(&pdev->dev, "rtas_msi: no req#msi/x, nothing to do.\n"); return; } diff --git a/arch/powerpc/platforms/pseries/pci_dlpar.c b/arch/powerpc/platforms/pseries/pci_dlpar.c index 5e1ed3d60ee5..ad152a0e3946 100644 --- a/arch/powerpc/platforms/pseries/pci_dlpar.c +++ b/arch/powerpc/platforms/pseries/pci_dlpar.c @@ -137,11 +137,9 @@ EXPORT_SYMBOL_GPL(pcibios_add_pci_devices); struct pci_controller * __devinit init_phb_dynamic(struct device_node *dn) { struct pci_controller *phb; - int primary; pr_debug("PCI: Initializing new hotplug PHB %s\n", dn->full_name); - primary = list_empty(&hose_list); phb = pcibios_alloc_controller(dn); if (!phb) return NULL; diff --git a/arch/powerpc/sysdev/cpm2.c b/arch/powerpc/sysdev/cpm2.c index f1c3395633b9..474d176a6ec3 100644 --- a/arch/powerpc/sysdev/cpm2.c +++ b/arch/powerpc/sysdev/cpm2.c @@ -129,7 +129,8 @@ void __cpm2_setbrg(uint brg, uint rate, uint clk, int div16, int src) brg -= 4; } bp += brg; - val = (((clk / rate) - 1) << 1) | CPM_BRG_EN | src; + /* Round the clock divider to the nearest integer. */ + val = (((clk * 2 / rate) - 1) & ~1) | CPM_BRG_EN | src; if (div16) val |= CPM_BRG_DIV16; diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c index 9817f63723dd..78021d8afc53 100644 --- a/arch/powerpc/sysdev/fsl_pci.c +++ b/arch/powerpc/sysdev/fsl_pci.c @@ -1,12 +1,16 @@ /* * MPC83xx/85xx/86xx PCI/PCIE support routing. * - * Copyright 2007,2008 Freescale Semiconductor, Inc + * Copyright 2007-2009 Freescale Semiconductor, Inc. + * Copyright 2008-2009 MontaVista Software, Inc. * * Initial author: Xianghua Xiao <x.xiao@freescale.com> * Recode: ZHANG WEI <wei.zhang@freescale.com> * Rewrite the routing for Frescale PCI and PCI Express * Roy Zang <tie-fei.zang@freescale.com> + * MPC83xx PCI-Express support: + * Tony Li <tony.li@freescale.com> + * Anton Vorontsov <avorontsov@ru.mvista.com> * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -27,6 +31,29 @@ #include <sysdev/fsl_soc.h> #include <sysdev/fsl_pci.h> +static int fsl_pcie_bus_fixup; + +static void __init quirk_fsl_pcie_header(struct pci_dev *dev) +{ + /* if we aren't a PCIe don't bother */ + if (!pci_find_capability(dev, PCI_CAP_ID_EXP)) + return; + + dev->class = PCI_CLASS_BRIDGE_PCI << 8; + fsl_pcie_bus_fixup = 1; + return; +} + +static int __init fsl_pcie_check_link(struct pci_controller *hose) +{ + u32 val; + + early_read_config_dword(hose, 0, 0, PCIE_LTSSM, &val); + if (val < PCIE_LTSSM_L0) + return 1; + return 0; +} + #if defined(CONFIG_PPC_85xx) || defined(CONFIG_PPC_86xx) static int __init setup_one_atmu(struct ccsr_pci __iomem *pci, unsigned int index, const struct resource *res, @@ -159,28 +186,6 @@ static void __init setup_pci_pcsrbar(struct pci_controller *hose) #endif } -static int fsl_pcie_bus_fixup; - -static void __init quirk_fsl_pcie_header(struct pci_dev *dev) -{ - /* if we aren't a PCIe don't bother */ - if (!pci_find_capability(dev, PCI_CAP_ID_EXP)) - return ; - - dev->class = PCI_CLASS_BRIDGE_PCI << 8; - fsl_pcie_bus_fixup = 1; - return ; -} - -static int __init fsl_pcie_check_link(struct pci_controller *hose) -{ - u32 val; - early_read_config_dword(hose, 0, 0, PCIE_LTSSM, &val); - if (val < PCIE_LTSSM_L0) - return 1; - return 0; -} - void fsl_pcibios_fixup_bus(struct pci_bus *bus) { struct pci_controller *hose = (struct pci_controller *) bus->sysdata; @@ -294,8 +299,184 @@ DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8610, quirk_fsl_pcie_header); #endif /* CONFIG_PPC_85xx || CONFIG_PPC_86xx */ #if defined(CONFIG_PPC_83xx) || defined(CONFIG_PPC_MPC512x) +DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8314E, quirk_fsl_pcie_header); +DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8314, quirk_fsl_pcie_header); +DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8315E, quirk_fsl_pcie_header); +DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8315, quirk_fsl_pcie_header); +DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8377E, quirk_fsl_pcie_header); +DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8377, quirk_fsl_pcie_header); +DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8378E, quirk_fsl_pcie_header); +DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8378, quirk_fsl_pcie_header); + +struct mpc83xx_pcie_priv { + void __iomem *cfg_type0; + void __iomem *cfg_type1; + u32 dev_base; +}; + +/* + * With the convention of u-boot, the PCIE outbound window 0 serves + * as configuration transactions outbound. + */ +#define PEX_OUTWIN0_BAR 0xCA4 +#define PEX_OUTWIN0_TAL 0xCA8 +#define PEX_OUTWIN0_TAH 0xCAC + +static int mpc83xx_pcie_exclude_device(struct pci_bus *bus, unsigned int devfn) +{ + struct pci_controller *hose = bus->sysdata; + + if (hose->indirect_type & PPC_INDIRECT_TYPE_NO_PCIE_LINK) + return PCIBIOS_DEVICE_NOT_FOUND; + /* + * Workaround for the HW bug: for Type 0 configure transactions the + * PCI-E controller does not check the device number bits and just + * assumes that the device number bits are 0. + */ + if (bus->number == hose->first_busno || + bus->primary == hose->first_busno) { + if (devfn & 0xf8) + return PCIBIOS_DEVICE_NOT_FOUND; + } + + if (ppc_md.pci_exclude_device) { + if (ppc_md.pci_exclude_device(hose, bus->number, devfn)) + return PCIBIOS_DEVICE_NOT_FOUND; + } + + return PCIBIOS_SUCCESSFUL; +} + +static void __iomem *mpc83xx_pcie_remap_cfg(struct pci_bus *bus, + unsigned int devfn, int offset) +{ + struct pci_controller *hose = bus->sysdata; + struct mpc83xx_pcie_priv *pcie = hose->dn->data; + u8 bus_no = bus->number - hose->first_busno; + u32 dev_base = bus_no << 24 | devfn << 16; + int ret; + + ret = mpc83xx_pcie_exclude_device(bus, devfn); + if (ret) + return NULL; + + offset &= 0xfff; + + /* Type 0 */ + if (bus->number == hose->first_busno) + return pcie->cfg_type0 + offset; + + if (pcie->dev_base == dev_base) + goto mapped; + + out_le32(pcie->cfg_type0 + PEX_OUTWIN0_TAL, dev_base); + + pcie->dev_base = dev_base; +mapped: + return pcie->cfg_type1 + offset; +} + +static int mpc83xx_pcie_read_config(struct pci_bus *bus, unsigned int devfn, + int offset, int len, u32 *val) +{ + void __iomem *cfg_addr; + + cfg_addr = mpc83xx_pcie_remap_cfg(bus, devfn, offset); + if (!cfg_addr) + return PCIBIOS_DEVICE_NOT_FOUND; + + switch (len) { + case 1: + *val = in_8(cfg_addr); + break; + case 2: + *val = in_le16(cfg_addr); + break; + default: + *val = in_le32(cfg_addr); + break; + } + + return PCIBIOS_SUCCESSFUL; +} + +static int mpc83xx_pcie_write_config(struct pci_bus *bus, unsigned int devfn, + int offset, int len, u32 val) +{ + void __iomem *cfg_addr; + + cfg_addr = mpc83xx_pcie_remap_cfg(bus, devfn, offset); + if (!cfg_addr) + return PCIBIOS_DEVICE_NOT_FOUND; + + switch (len) { + case 1: + out_8(cfg_addr, val); + break; + case 2: + out_le16(cfg_addr, val); + break; + default: + out_le32(cfg_addr, val); + break; + } + + return PCIBIOS_SUCCESSFUL; +} + +static struct pci_ops mpc83xx_pcie_ops = { + .read = mpc83xx_pcie_read_config, + .write = mpc83xx_pcie_write_config, +}; + +static int __init mpc83xx_pcie_setup(struct pci_controller *hose, + struct resource *reg) +{ + struct mpc83xx_pcie_priv *pcie; + u32 cfg_bar; + int ret = -ENOMEM; + + pcie = zalloc_maybe_bootmem(sizeof(*pcie), GFP_KERNEL); + if (!pcie) + return ret; + + pcie->cfg_type0 = ioremap(reg->start, resource_size(reg)); + if (!pcie->cfg_type0) + goto err0; + + cfg_bar = in_le32(pcie->cfg_type0 + PEX_OUTWIN0_BAR); + if (!cfg_bar) { + /* PCI-E isn't configured. */ + ret = -ENODEV; + goto err1; + } + + pcie->cfg_type1 = ioremap(cfg_bar, 0x1000); + if (!pcie->cfg_type1) + goto err1; + + WARN_ON(hose->dn->data); + hose->dn->data = pcie; + hose->ops = &mpc83xx_pcie_ops; + + out_le32(pcie->cfg_type0 + PEX_OUTWIN0_TAH, 0); + out_le32(pcie->cfg_type0 + PEX_OUTWIN0_TAL, 0); + + if (fsl_pcie_check_link(hose)) + hose->indirect_type |= PPC_INDIRECT_TYPE_NO_PCIE_LINK; + + return 0; +err1: + iounmap(pcie->cfg_type0); +err0: + kfree(pcie); + return ret; + +} + int __init mpc83xx_add_bridge(struct device_node *dev) { + int ret; int len; struct pci_controller *hose; struct resource rsrc_reg; @@ -303,6 +484,11 @@ int __init mpc83xx_add_bridge(struct device_node *dev) const int *bus_range; int primary; + if (!of_device_is_available(dev)) { + pr_warning("%s: disabled by the firmware.\n", + dev->full_name); + return -ENODEV; + } pr_debug("Adding PCI host bridge %s\n", dev->full_name); /* Fetch host bridge registers address */ @@ -350,7 +536,14 @@ int __init mpc83xx_add_bridge(struct device_node *dev) hose->first_busno = bus_range ? bus_range[0] : 0; hose->last_busno = bus_range ? bus_range[1] : 0xff; - setup_indirect_pci(hose, rsrc_cfg.start, rsrc_cfg.start + 4, 0); + if (of_device_is_compatible(dev, "fsl,mpc8314-pcie")) { + ret = mpc83xx_pcie_setup(hose, &rsrc_reg); + if (ret) + goto err0; + } else { + setup_indirect_pci(hose, rsrc_cfg.start, + rsrc_cfg.start + 4, 0); + } printk(KERN_INFO "Found FSL PCI host bridge at 0x%016llx. " "Firmware bus number: %d->%d\n", @@ -365,5 +558,8 @@ int __init mpc83xx_add_bridge(struct device_node *dev) pci_process_bridge_OF_ranges(hose, dev, primary); return 0; +err0: + pcibios_free_controller(hose); + return ret; } #endif /* CONFIG_PPC_83xx */ |
