diff options
Diffstat (limited to 'arch/powerpc')
61 files changed, 1418 insertions, 634 deletions
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 155d571f5e26..2e19500921f9 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -313,19 +313,6 @@ config 8XX_MINIMAL_FPEMU It is recommended that you build a soft-float userspace instead. -config IOMMU_VMERGE - bool "Enable IOMMU virtual merging" - depends on PPC64 - default y - help - Cause IO segments sent to a device for DMA to be merged virtually - by the IOMMU when they happen to have been allocated contiguously. - This doesn't add pressure to the IOMMU allocator. However, some - drivers don't support getting large merged segments coming back - from *_map_sg(). - - Most drivers don't have this problem; it is safe to say Y here. - config IOMMU_HELPER def_bool PPC64 @@ -672,6 +659,9 @@ config ZONE_DMA bool default y +config NEED_DMA_MAP_STATE + def_bool (PPC64 || NOT_COHERENT_CACHE) + config GENERIC_ISA_DMA bool depends on PPC64 || POWER4 || 6xx && !CPM2 diff --git a/arch/powerpc/boot/dts/gef_ppc9a.dts b/arch/powerpc/boot/dts/gef_ppc9a.dts index 977f260d5e64..83f4b79dff85 100644 --- a/arch/powerpc/boot/dts/gef_ppc9a.dts +++ b/arch/powerpc/boot/dts/gef_ppc9a.dts @@ -1,7 +1,7 @@ /* - * GE Fanuc PPC9A Device Tree Source + * GE PPC9A Device Tree Source * - * Copyright 2008 GE Fanuc Intelligent Platforms Embedded Systems, Inc. + * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the diff --git a/arch/powerpc/boot/dts/gef_sbc310.dts b/arch/powerpc/boot/dts/gef_sbc310.dts index 8e4efff3bda1..fc3a331dd392 100644 --- a/arch/powerpc/boot/dts/gef_sbc310.dts +++ b/arch/powerpc/boot/dts/gef_sbc310.dts @@ -1,7 +1,7 @@ /* - * GE Fanuc SBC310 Device Tree Source + * GE SBC310 Device Tree Source * - * Copyright 2008 GE Fanuc Intelligent Platforms Embedded Systems, Inc. + * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the diff --git a/arch/powerpc/boot/dts/gef_sbc610.dts b/arch/powerpc/boot/dts/gef_sbc610.dts index bb7060078fb4..c0671cc98125 100644 --- a/arch/powerpc/boot/dts/gef_sbc610.dts +++ b/arch/powerpc/boot/dts/gef_sbc610.dts @@ -1,7 +1,7 @@ /* - * GE Fanuc SBC610 Device Tree Source + * GE SBC610 Device Tree Source * - * Copyright 2008 GE Fanuc Intelligent Platforms Embedded Systems, Inc. + * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the diff --git a/arch/powerpc/boot/dts/kmeter1.dts b/arch/powerpc/boot/dts/kmeter1.dts index 65b8b4f27efe..d8b5d12fb663 100644 --- a/arch/powerpc/boot/dts/kmeter1.dts +++ b/arch/powerpc/boot/dts/kmeter1.dts @@ -490,7 +490,7 @@ compatible = "cfi-flash"; /* * The Intel P30 chip has 2 non-identical chips on - * one die, so we need to define 2 seperate regions + * one die, so we need to define 2 separate regions * that are scanned by physmap_of independantly. */ reg = <0 0x00000000 0x02000000 diff --git a/arch/powerpc/configs/52xx/cm5200_defconfig b/arch/powerpc/configs/52xx/cm5200_defconfig index ff9bdb28197d..218d49b36a0c 100644 --- a/arch/powerpc/configs/52xx/cm5200_defconfig +++ b/arch/powerpc/configs/52xx/cm5200_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.33-rc2 -# Wed Dec 30 14:45:07 2009 +# Linux kernel version: 2.6.34-rc1 +# Wed Mar 10 14:34:22 2010 # # CONFIG_PPC64 is not set @@ -94,11 +94,6 @@ CONFIG_RCU_FANOUT=32 # CONFIG_TREE_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -CONFIG_GROUP_SCHED=y -CONFIG_FAIR_GROUP_SCHED=y -# CONFIG_RT_GROUP_SCHED is not set -CONFIG_USER_SCHED=y -# CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y @@ -109,6 +104,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_RD_GZIP=y # CONFIG_RD_BZIP2 is not set # CONFIG_RD_LZMA is not set +# CONFIG_RD_LZO is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_ANON_INODES=y @@ -340,7 +336,6 @@ CONFIG_NET=y # Networking options # CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y CONFIG_XFRM=y CONFIG_XFRM_USER=y @@ -517,6 +512,8 @@ CONFIG_MTD_PHYSMAP_OF=y # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set +CONFIG_OF_FLATTREE=y +CONFIG_OF_DYNAMIC=y CONFIG_OF_DEVICE=y CONFIG_OF_I2C=y CONFIG_OF_MDIO=y @@ -684,6 +681,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_SERIAL_MPC52xx=y CONFIG_SERIAL_MPC52xx_CONSOLE=y CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=57600 +# CONFIG_SERIAL_TIMBERDALE is not set # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set @@ -714,6 +712,7 @@ CONFIG_I2C_HELPER_AUTO=y CONFIG_I2C_MPC=y # CONFIG_I2C_OCORES is not set # CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_XILINX is not set # # External I2C/SMBus adapter drivers @@ -754,6 +753,7 @@ CONFIG_WATCHDOG=y # Watchdog Device Drivers # # CONFIG_SOFT_WATCHDOG is not set +# CONFIG_MAX63XX_WATCHDOG is not set # CONFIG_MPC5200_WDT is not set # @@ -771,18 +771,20 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_CORE is not set +# CONFIG_MFD_88PM860X is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_PMIC_ADP5520 is not set +# CONFIG_MFD_MAX8925 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_WM8994 is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set -# CONFIG_MFD_88PM8607 is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -813,7 +815,6 @@ CONFIG_USB=y CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set # CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_SUSPEND is not set # CONFIG_USB_OTG is not set # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set @@ -891,7 +892,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set -# CONFIG_USB_BERRY_CHARGE is not set # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set @@ -903,7 +903,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set -# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set # @@ -1009,6 +1008,7 @@ CONFIG_JFFS2_ZLIB=y # CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set +# CONFIG_LOGFS is not set CONFIG_CRAMFS=y # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set diff --git a/arch/powerpc/configs/52xx/lite5200b_defconfig b/arch/powerpc/configs/52xx/lite5200b_defconfig index 7b3f4d0ed404..90492ff25232 100644 --- a/arch/powerpc/configs/52xx/lite5200b_defconfig +++ b/arch/powerpc/configs/52xx/lite5200b_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.33-rc2 -# Wed Dec 30 14:45:09 2009 +# Linux kernel version: 2.6.34-rc1 +# Wed Mar 10 14:34:24 2010 # # CONFIG_PPC64 is not set @@ -95,11 +95,6 @@ CONFIG_RCU_FANOUT=32 # CONFIG_TREE_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -CONFIG_GROUP_SCHED=y -# CONFIG_FAIR_GROUP_SCHED is not set -# CONFIG_RT_GROUP_SCHED is not set -CONFIG_USER_SCHED=y -# CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y @@ -110,6 +105,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_RD_GZIP=y # CONFIG_RD_BZIP2 is not set # CONFIG_RD_LZMA is not set +# CONFIG_RD_LZO is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_ANON_INODES=y @@ -317,6 +313,7 @@ CONFIG_SUSPEND=y CONFIG_SUSPEND_FREEZER=y # CONFIG_HIBERNATION is not set # CONFIG_PM_RUNTIME is not set +CONFIG_PM_OPS=y CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y @@ -333,7 +330,6 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set # CONFIG_PCI_IOV is not set @@ -360,7 +356,6 @@ CONFIG_NET=y # Networking options # CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y CONFIG_XFRM=y CONFIG_XFRM_USER=m @@ -457,6 +452,8 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set # CONFIG_MTD is not set +CONFIG_OF_FLATTREE=y +CONFIG_OF_DYNAMIC=y CONFIG_OF_DEVICE=y CONFIG_OF_I2C=y CONFIG_OF_MDIO=y @@ -631,6 +628,7 @@ CONFIG_ATA_SFF=y # CONFIG_PATA_IT821X is not set # CONFIG_PATA_IT8213 is not set # CONFIG_PATA_JMICRON is not set +# CONFIG_PATA_LEGACY is not set # CONFIG_PATA_TRIFLEX is not set # CONFIG_PATA_MARVELL is not set CONFIG_PATA_MPC52xx=y @@ -668,7 +666,7 @@ CONFIG_PATA_MPC52xx=y # # -# See the help texts for more information. +# The newer stack is recommended. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set @@ -768,6 +766,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLCNIC is not set # CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_BE2NET is not set @@ -828,6 +827,7 @@ CONFIG_SERIAL_MPC52xx=y CONFIG_SERIAL_MPC52xx_CONSOLE=y CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=115200 # CONFIG_SERIAL_JSM is not set +# CONFIG_SERIAL_TIMBERDALE is not set # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set @@ -879,6 +879,7 @@ CONFIG_I2C_HELPER_AUTO=y CONFIG_I2C_MPC=y # CONFIG_I2C_OCORES is not set # CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_XILINX is not set # # External I2C/SMBus adapter drivers @@ -924,18 +925,21 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_CORE is not set +# CONFIG_MFD_88PM860X is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_PMIC_ADP5520 is not set +# CONFIG_MFD_MAX8925 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_WM8994 is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set -# CONFIG_MFD_88PM8607 is not set +# CONFIG_LPC_SCH is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -944,6 +948,7 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_AGP is not set CONFIG_VGA_ARB=y +CONFIG_VGA_ARB_MAX_GPUS=16 # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m @@ -1062,6 +1067,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set +# CONFIG_LOGFS is not set # CONFIG_CRAMFS is not set # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set diff --git a/arch/powerpc/configs/52xx/motionpro_defconfig b/arch/powerpc/configs/52xx/motionpro_defconfig index eaae2d469aa0..dffc8cac825f 100644 --- a/arch/powerpc/configs/52xx/motionpro_defconfig +++ b/arch/powerpc/configs/52xx/motionpro_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.33-rc2 -# Wed Dec 30 14:45:08 2009 +# Linux kernel version: 2.6.34-rc1 +# Wed Mar 10 14:34:23 2010 # # CONFIG_PPC64 is not set @@ -94,11 +94,6 @@ CONFIG_RCU_FANOUT=32 # CONFIG_TREE_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -CONFIG_GROUP_SCHED=y -CONFIG_FAIR_GROUP_SCHED=y -# CONFIG_RT_GROUP_SCHED is not set -CONFIG_USER_SCHED=y -# CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y @@ -109,6 +104,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_RD_GZIP=y # CONFIG_RD_BZIP2 is not set # CONFIG_RD_LZMA is not set +# CONFIG_RD_LZO is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_ANON_INODES=y @@ -341,7 +337,6 @@ CONFIG_NET=y # Networking options # CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y CONFIG_XFRM=y CONFIG_XFRM_USER=y @@ -518,6 +513,8 @@ CONFIG_MTD_ROM=y # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set +CONFIG_OF_FLATTREE=y +CONFIG_OF_DYNAMIC=y CONFIG_OF_DEVICE=y CONFIG_OF_I2C=y CONFIG_OF_MDIO=y @@ -699,6 +696,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_SERIAL_MPC52xx=y CONFIG_SERIAL_MPC52xx_CONSOLE=y CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=115200 +# CONFIG_SERIAL_TIMBERDALE is not set # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set @@ -728,6 +726,7 @@ CONFIG_I2C_HELPER_AUTO=y CONFIG_I2C_MPC=y # CONFIG_I2C_OCORES is not set # CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_XILINX is not set # # External I2C/SMBus adapter drivers @@ -773,10 +772,11 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7411 is not set # CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set -# CONFIG_SENSORS_ADT7473 is not set # CONFIG_SENSORS_ADT7475 is not set +# CONFIG_SENSORS_ASC7621 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_F71805F is not set @@ -811,6 +811,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_AMC6821 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set # CONFIG_SENSORS_TMP421 is not set @@ -831,6 +832,7 @@ CONFIG_WATCHDOG=y # Watchdog Device Drivers # # CONFIG_SOFT_WATCHDOG is not set +# CONFIG_MAX63XX_WATCHDOG is not set # CONFIG_MPC5200_WDT is not set CONFIG_SSB_POSSIBLE=y @@ -843,18 +845,20 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_CORE is not set +# CONFIG_MFD_88PM860X is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_PMIC_ADP5520 is not set +# CONFIG_MFD_MAX8925 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_WM8994 is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set -# CONFIG_MFD_88PM8607 is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -1050,6 +1054,7 @@ CONFIG_JFFS2_ZLIB=y # CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set +# CONFIG_LOGFS is not set CONFIG_CRAMFS=y # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set diff --git a/arch/powerpc/configs/52xx/pcm030_defconfig b/arch/powerpc/configs/52xx/pcm030_defconfig index 1742c0200b75..3cb2a522046a 100644 --- a/arch/powerpc/configs/52xx/pcm030_defconfig +++ b/arch/powerpc/configs/52xx/pcm030_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.33-rc2 -# Wed Dec 30 14:45:10 2009 +# Linux kernel version: 2.6.34-rc1 +# Wed Mar 10 14:34:25 2010 # # CONFIG_PPC64 is not set @@ -97,11 +97,6 @@ CONFIG_RCU_FANOUT=32 CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 -CONFIG_GROUP_SCHED=y -CONFIG_FAIR_GROUP_SCHED=y -# CONFIG_RT_GROUP_SCHED is not set -CONFIG_USER_SCHED=y -# CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y @@ -326,7 +321,6 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -CONFIG_PCI_LEGACY=y # CONFIG_PCI_STUB is not set # CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set @@ -352,7 +346,6 @@ CONFIG_NET=y # Networking options # CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y @@ -525,6 +518,8 @@ CONFIG_MTD_PHYSMAP=y # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set +CONFIG_OF_FLATTREE=y +CONFIG_OF_DYNAMIC=y CONFIG_OF_DEVICE=y CONFIG_OF_I2C=y CONFIG_OF_MDIO=y @@ -610,6 +605,7 @@ CONFIG_ATA_SFF=y # CONFIG_PATA_IT821X is not set # CONFIG_PATA_IT8213 is not set # CONFIG_PATA_JMICRON is not set +# CONFIG_PATA_LEGACY is not set # CONFIG_PATA_TRIFLEX is not set # CONFIG_PATA_MARVELL is not set CONFIG_PATA_MPC52xx=m @@ -647,7 +643,7 @@ CONFIG_PATA_MPC52xx=m # # -# See the help texts for more information. +# The newer stack is recommended. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set @@ -775,6 +771,7 @@ CONFIG_SERIAL_MPC52xx=y CONFIG_SERIAL_MPC52xx_CONSOLE=y CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=9600 # CONFIG_SERIAL_JSM is not set +# CONFIG_SERIAL_TIMBERDALE is not set # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set @@ -824,6 +821,7 @@ CONFIG_I2C_HELPER_AUTO=y CONFIG_I2C_MPC=y # CONFIG_I2C_OCORES is not set # CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_XILINX is not set # # External I2C/SMBus adapter drivers @@ -870,18 +868,21 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_CORE is not set +# CONFIG_MFD_88PM860X is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_PMIC_ADP5520 is not set +# CONFIG_MFD_MAX8925 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_WM8994 is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set -# CONFIG_MFD_88PM8607 is not set +# CONFIG_LPC_SCH is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -890,6 +891,7 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_AGP is not set CONFIG_VGA_ARB=y +CONFIG_VGA_ARB_MAX_GPUS=16 # CONFIG_DRM is not set # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set @@ -997,7 +999,6 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set -# CONFIG_USB_BERRY_CHARGE is not set # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set @@ -1009,7 +1010,6 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set -# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set # @@ -1172,6 +1172,7 @@ CONFIG_JFFS2_ZLIB=y # CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set +# CONFIG_LOGFS is not set # CONFIG_CRAMFS is not set # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set diff --git a/arch/powerpc/configs/52xx/tqm5200_defconfig b/arch/powerpc/configs/52xx/tqm5200_defconfig index 3972438db719..96181c62abfa 100644 --- a/arch/powerpc/configs/52xx/tqm5200_defconfig +++ b/arch/powerpc/configs/52xx/tqm5200_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.33-rc2 -# Wed Dec 30 14:45:09 2009 +# Linux kernel version: 2.6.34-rc1 +# Wed Mar 10 14:34:24 2010 # # CONFIG_PPC64 is not set @@ -94,11 +94,6 @@ CONFIG_RCU_FANOUT=32 # CONFIG_TREE_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -CONFIG_GROUP_SCHED=y -CONFIG_FAIR_GROUP_SCHED=y -# CONFIG_RT_GROUP_SCHED is not set -CONFIG_USER_SCHED=y -# CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y @@ -109,6 +104,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_RD_GZIP=y # CONFIG_RD_BZIP2 is not set # CONFIG_RD_LZMA is not set +# CONFIG_RD_LZO is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_ANON_INODES=y @@ -346,7 +342,6 @@ CONFIG_NET=y # Networking options # CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y CONFIG_XFRM=y CONFIG_XFRM_USER=y @@ -524,6 +519,8 @@ CONFIG_MTD_PHYSMAP_OF=y # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set +CONFIG_OF_FLATTREE=y +CONFIG_OF_DYNAMIC=y CONFIG_OF_DEVICE=y CONFIG_OF_I2C=y CONFIG_OF_MDIO=y @@ -704,6 +701,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_SERIAL_MPC52xx=y CONFIG_SERIAL_MPC52xx_CONSOLE=y CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=115200 +# CONFIG_SERIAL_TIMBERDALE is not set # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set @@ -733,6 +731,7 @@ CONFIG_I2C_HELPER_AUTO=y CONFIG_I2C_MPC=y # CONFIG_I2C_OCORES is not set # CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_XILINX is not set # # External I2C/SMBus adapter drivers @@ -780,10 +779,11 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7411 is not set # CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set -# CONFIG_SENSORS_ADT7473 is not set # CONFIG_SENSORS_ADT7475 is not set +# CONFIG_SENSORS_ASC7621 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_F71805F is not set @@ -818,6 +818,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_AMC6821 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set # CONFIG_SENSORS_TMP421 is not set @@ -838,6 +839,7 @@ CONFIG_WATCHDOG=y # Watchdog Device Drivers # # CONFIG_SOFT_WATCHDOG is not set +# CONFIG_MAX63XX_WATCHDOG is not set # CONFIG_MPC5200_WDT is not set # @@ -855,18 +857,20 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_CORE is not set +# CONFIG_MFD_88PM860X is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_PMIC_ADP5520 is not set +# CONFIG_MFD_MAX8925 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_WM8994 is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set -# CONFIG_MFD_88PM8607 is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -897,7 +901,6 @@ CONFIG_USB=y CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set # CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_SUSPEND is not set # CONFIG_USB_OTG is not set # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set @@ -975,7 +978,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set -# CONFIG_USB_BERRY_CHARGE is not set # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set @@ -987,7 +989,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set -# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set # @@ -1151,6 +1152,7 @@ CONFIG_JFFS2_ZLIB=y # CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set +# CONFIG_LOGFS is not set CONFIG_CRAMFS=y # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set diff --git a/arch/powerpc/configs/mpc5200_defconfig b/arch/powerpc/configs/mpc5200_defconfig index 61cf73d0000f..7012ac0134f0 100644 --- a/arch/powerpc/configs/mpc5200_defconfig +++ b/arch/powerpc/configs/mpc5200_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.33-rc2 -# Wed Dec 30 15:08:52 2009 +# Linux kernel version: 2.6.34-rc1 +# Wed Mar 10 14:38:54 2010 # # CONFIG_PPC64 is not set @@ -96,30 +96,37 @@ CONFIG_RCU_FANOUT=32 # CONFIG_TREE_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_GROUP_SCHED is not set # CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set -# CONFIG_NAMESPACES is not set +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" CONFIG_RD_GZIP=y -# CONFIG_RD_BZIP2 is not set -# CONFIG_RD_LZMA is not set +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y +CONFIG_RD_LZO=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_ANON_INODES=y -CONFIG_EMBEDDED=y -# CONFIG_SYSCTL_SYSCALL is not set -# CONFIG_KALLSYMS is not set +# CONFIG_EMBEDDED is not set +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -# CONFIG_EPOLL is not set +CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y @@ -141,6 +148,7 @@ CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y @@ -320,6 +328,7 @@ CONFIG_SUSPEND=y CONFIG_SUSPEND_FREEZER=y # CONFIG_HIBERNATION is not set # CONFIG_PM_RUNTIME is not set +CONFIG_PM_OPS=y CONFIG_SECCOMP=y CONFIG_ISA_DMA_API=y @@ -336,7 +345,6 @@ CONFIG_PCI_SYSCALL=y # CONFIG_PCIEPORTBUS is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set -CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set # CONFIG_PCI_IOV is not set @@ -363,7 +371,6 @@ CONFIG_NET=y # Networking options # CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y CONFIG_XFRM=y CONFIG_XFRM_USER=m @@ -454,7 +461,9 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set @@ -554,6 +563,8 @@ CONFIG_MTD_UBI_BEB_RESERVE=1 # UBI debugging options # # CONFIG_MTD_UBI_DEBUG is not set +CONFIG_OF_FLATTREE=y +CONFIG_OF_DYNAMIC=y CONFIG_OF_DEVICE=y CONFIG_OF_GPIO=y CONFIG_OF_I2C=y @@ -732,6 +743,7 @@ CONFIG_ATA_SFF=y # CONFIG_PATA_IT821X is not set # CONFIG_PATA_IT8213 is not set # CONFIG_PATA_JMICRON is not set +# CONFIG_PATA_LEGACY is not set # CONFIG_PATA_TRIFLEX is not set # CONFIG_PATA_MARVELL is not set CONFIG_PATA_MPC52xx=y @@ -770,7 +782,7 @@ CONFIG_PATA_PLATFORM=y # # -# See the help texts for more information. +# The newer stack is recommended. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set @@ -929,6 +941,7 @@ CONFIG_SERIAL_MPC52xx=y CONFIG_SERIAL_MPC52xx_CONSOLE=y CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=115200 # CONFIG_SERIAL_JSM is not set +# CONFIG_SERIAL_TIMBERDALE is not set # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set @@ -981,6 +994,7 @@ CONFIG_I2C_ALGOBIT=y CONFIG_I2C_MPC=y # CONFIG_I2C_OCORES is not set # CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_XILINX is not set # # External I2C/SMBus adapter drivers @@ -1010,9 +1024,9 @@ CONFIG_SPI_MASTER=y # # SPI Master Controller Drivers # -# CONFIG_SPI_BITBANG is not set -# CONFIG_SPI_GPIO is not set -# CONFIG_SPI_MPC52xx is not set +CONFIG_SPI_BITBANG=m +CONFIG_SPI_GPIO=m +CONFIG_SPI_MPC52xx=m CONFIG_SPI_MPC52xx_PSC=m # CONFIG_SPI_XILINX is not set # CONFIG_SPI_DESIGNWARE is not set @@ -1036,14 +1050,18 @@ CONFIG_GPIOLIB=y # # Memory mapped GPIO expanders: # +# CONFIG_GPIO_IT8761E is not set # CONFIG_GPIO_XILINX is not set +# CONFIG_GPIO_SCH is not set # # I2C GPIO expanders: # +# CONFIG_GPIO_MAX7300 is not set # CONFIG_GPIO_MAX732X is not set # CONFIG_GPIO_PCA953X is not set # CONFIG_GPIO_PCF857X is not set +# CONFIG_GPIO_ADP5588 is not set # # PCI GPIO expanders: @@ -1080,10 +1098,11 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7411 is not set # CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set -# CONFIG_SENSORS_ADT7473 is not set # CONFIG_SENSORS_ADT7475 is not set +# CONFIG_SENSORS_ASC7621 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set @@ -1123,6 +1142,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_AMC6821 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set # CONFIG_SENSORS_TMP421 is not set @@ -1147,6 +1167,7 @@ CONFIG_WATCHDOG=y # Watchdog Device Drivers # # CONFIG_SOFT_WATCHDOG is not set +# CONFIG_MAX63XX_WATCHDOG is not set # CONFIG_ALIM7101_WDT is not set # CONFIG_MPC5200_WDT is not set # CONFIG_WATCHDOG_RTAS is not set @@ -1172,22 +1193,27 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_CORE is not set +# CONFIG_MFD_88PM860X is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_HTC_I2CPLD is not set # CONFIG_TPS65010 is not set # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_PMIC_ADP5520 is not set +# CONFIG_MFD_MAX8925 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_WM8994 is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_MFD_MC13783 is not set # CONFIG_AB3100_CORE is not set # CONFIG_EZX_PCAP is not set -# CONFIG_MFD_88PM8607 is not set # CONFIG_AB4500_CORE is not set +# CONFIG_MFD_TIMBERDALE is not set +# CONFIG_LPC_SCH is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -1196,6 +1222,7 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_AGP is not set CONFIG_VGA_ARB=y +CONFIG_VGA_ARB_MAX_GPUS=16 CONFIG_DRM=y # CONFIG_DRM_TDFX is not set # CONFIG_DRM_R128 is not set @@ -1309,32 +1336,46 @@ CONFIG_USB_HID=y # # Special HID drivers # +# CONFIG_HID_3M_PCT is not set CONFIG_HID_A4TECH=y -# CONFIG_HID_APPLE is not set +CONFIG_HID_APPLE=y CONFIG_HID_BELKIN=y CONFIG_HID_CHERRY=y -# CONFIG_HID_CHICONY is not set +CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y -# CONFIG_HID_DRAGONRISE is not set +CONFIG_HID_DRAGONRISE=y +# CONFIG_DRAGONRISE_FF is not set CONFIG_HID_EZKEY=y -# CONFIG_HID_KYE is not set -# CONFIG_HID_GYRATION is not set -# CONFIG_HID_TWINHAN is not set -# CONFIG_HID_KENSINGTON is not set -# CONFIG_HID_LOGITECH is not set -# CONFIG_HID_MICROSOFT is not set -# CONFIG_HID_MONTEREY is not set +CONFIG_HID_KYE=y +CONFIG_HID_GYRATION=y +CONFIG_HID_TWINHAN=y +CONFIG_HID_KENSINGTON=y +CONFIG_HID_LOGITECH=y +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +# CONFIG_LOGIG940_FF is not set +CONFIG_HID_MICROSOFT=y +# CONFIG_HID_MOSART is not set +CONFIG_HID_MONTEREY=y # CONFIG_HID_NTRIG is not set -# CONFIG_HID_PANTHERLORD is not set -# CONFIG_HID_PETALYNX is not set -# CONFIG_HID_SAMSUNG is not set -# CONFIG_HID_SONY is not set -# CONFIG_HID_SUNPLUS is not set -# CONFIG_HID_GREENASIA is not set -# CONFIG_HID_SMARTJOYPLUS is not set -# CONFIG_HID_TOPSEED is not set -# CONFIG_HID_THRUSTMASTER is not set -# CONFIG_HID_ZEROPLUS is not set +CONFIG_HID_ORTEK=y +CONFIG_HID_PANTHERLORD=y +# CONFIG_PANTHERLORD_FF is not set +CONFIG_HID_PETALYNX=y +# CONFIG_HID_QUANTA is not set +CONFIG_HID_SAMSUNG=y +CONFIG_HID_SONY=y +# CONFIG_HID_STANTUM is not set +CONFIG_HID_SUNPLUS=y +CONFIG_HID_GREENASIA=y +# CONFIG_GREENASIA_FF is not set +CONFIG_HID_SMARTJOYPLUS=y +# CONFIG_SMARTJOYPLUS_FF is not set +CONFIG_HID_TOPSEED=y +CONFIG_HID_THRUSTMASTER=y +# CONFIG_THRUSTMASTER_FF is not set +CONFIG_HID_ZEROPLUS=y +# CONFIG_ZEROPLUS_FF is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1349,10 +1390,7 @@ CONFIG_USB=y CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set # CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_SUSPEND is not set # CONFIG_USB_OTG is not set -# CONFIG_USB_OTG_WHITELIST is not set -# CONFIG_USB_OTG_BLACKLIST_HUB is not set CONFIG_USB_MON=y # CONFIG_USB_WUSB is not set # CONFIG_USB_WUSB_CBAF is not set @@ -1433,7 +1471,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set -# CONFIG_USB_BERRY_CHARGE is not set # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set @@ -1445,7 +1482,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set -# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set # @@ -1636,6 +1672,7 @@ CONFIG_UBIFS_FS=m CONFIG_UBIFS_FS_LZO=y CONFIG_UBIFS_FS_ZLIB=y # CONFIG_UBIFS_FS_DEBUG is not set +# CONFIG_LOGFS is not set CONFIG_CRAMFS=y # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set @@ -1730,8 +1767,11 @@ CONFIG_CRC32=y CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y CONFIG_LZO_COMPRESS=m -CONFIG_LZO_DECOMPRESS=m +CONFIG_LZO_DECOMPRESS=y CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y +CONFIG_DECOMPRESS_LZO=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y @@ -1776,11 +1816,11 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set -# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_WRITECOUNT is not set -# CONFIG_DEBUG_MEMORY_INIT is not set +CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set diff --git a/arch/powerpc/include/asm/compat.h b/arch/powerpc/include/asm/compat.h index 4774c2f92232..396d21a80058 100644 --- a/arch/powerpc/include/asm/compat.h +++ b/arch/powerpc/include/asm/compat.h @@ -7,7 +7,8 @@ #include <linux/types.h> #include <linux/sched.h> -#define COMPAT_USER_HZ 100 +#define COMPAT_USER_HZ 100 +#define COMPAT_UTS_MACHINE "ppc\0\0" typedef u32 compat_size_t; typedef s32 compat_ssize_t; diff --git a/arch/powerpc/include/asm/dma-mapping.h b/arch/powerpc/include/asm/dma-mapping.h index 80a973bb9e71..c85ef230135b 100644 --- a/arch/powerpc/include/asm/dma-mapping.h +++ b/arch/powerpc/include/asm/dma-mapping.h @@ -127,9 +127,6 @@ static inline int dma_supported(struct device *dev, u64 mask) return dma_ops->dma_supported(dev, mask); } -/* We have our own implementation of pci_set_dma_mask() */ -#define HAVE_ARCH_PCI_SET_DMA_MASK - static inline int dma_set_mask(struct device *dev, u64 dma_mask) { struct dma_map_ops *dma_ops = get_dma_ops(dev); diff --git a/arch/powerpc/include/asm/paca.h b/arch/powerpc/include/asm/paca.h index d8a693109c82..a011603d4079 100644 --- a/arch/powerpc/include/asm/paca.h +++ b/arch/powerpc/include/asm/paca.h @@ -14,6 +14,9 @@ #define _ASM_POWERPC_PACA_H #ifdef __KERNEL__ +#ifdef CONFIG_PPC64 + +#include <linux/init.h> #include <asm/types.h> #include <asm/lppaca.h> #include <asm/mmu.h> @@ -145,8 +148,19 @@ struct paca_struct { #endif }; -extern struct paca_struct paca[]; -extern void initialise_pacas(void); +extern struct paca_struct *paca; +extern __initdata struct paca_struct boot_paca; +extern void initialise_paca(struct paca_struct *new_paca, int cpu); + +extern void allocate_pacas(void); +extern void free_unused_pacas(void); + +#else /* CONFIG_PPC64 */ + +static inline void allocate_pacas(void) { }; +static inline void free_unused_pacas(void) { }; + +#endif /* CONFIG_PPC64 */ #endif /* __KERNEL__ */ #endif /* _ASM_POWERPC_PACA_H */ diff --git a/arch/powerpc/include/asm/pci.h b/arch/powerpc/include/asm/pci.h index b5ea626eea2d..a20a9ad2258b 100644 --- a/arch/powerpc/include/asm/pci.h +++ b/arch/powerpc/include/asm/pci.h @@ -141,38 +141,6 @@ extern int pci_mmap_legacy_page_range(struct pci_bus *bus, #define HAVE_PCI_LEGACY 1 -#if defined(CONFIG_PPC64) || defined(CONFIG_NOT_COHERENT_CACHE) -/* - * For 64-bit kernels, pci_unmap_{single,page} is not a nop. - * For 32-bit non-coherent kernels, pci_dma_sync_single_for_cpu() and - * so on are not nops. - * and thus... - */ -#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) \ - dma_addr_t ADDR_NAME; -#define DECLARE_PCI_UNMAP_LEN(LEN_NAME) \ - __u32 LEN_NAME; -#define pci_unmap_addr(PTR, ADDR_NAME) \ - ((PTR)->ADDR_NAME) -#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) \ - (((PTR)->ADDR_NAME) = (VAL)) -#define pci_unmap_len(PTR, LEN_NAME) \ - ((PTR)->LEN_NAME) -#define pci_unmap_len_set(PTR, LEN_NAME, VAL) \ - (((PTR)->LEN_NAME) = (VAL)) - -#else /* 32-bit && coherent */ - -/* pci_unmap_{page,single} is a nop so... */ -#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) -#define DECLARE_PCI_UNMAP_LEN(LEN_NAME) -#define pci_unmap_addr(PTR, ADDR_NAME) (0) -#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL) do { } while (0) -#define pci_unmap_len(PTR, LEN_NAME) (0) -#define pci_unmap_len_set(PTR, LEN_NAME, VAL) do { } while (0) - -#endif /* CONFIG_PPC64 || CONFIG_NOT_COHERENT_CACHE */ - #ifdef CONFIG_PPC64 /* The PCI address space does not equal the physical memory address diff --git a/arch/powerpc/include/asm/perf_event.h b/arch/powerpc/include/asm/perf_event.h index 3288ce3997e0..e6d4ce69b126 100644 --- a/arch/powerpc/include/asm/perf_event.h +++ b/arch/powerpc/include/asm/perf_event.h @@ -1,110 +1,23 @@ /* - * Performance event support - PowerPC-specific definitions. + * Performance event support - hardware-specific disambiguation * - * Copyright 2008-2009 Paul Mackerras, IBM Corporation. + * For now this is a compile-time decision, but eventually it should be + * runtime. This would allow multiplatform perf event support for e300 (fsl + * embedded perf counters) plus server/classic, and would accommodate + * devices other than the core which provide their own performance counters. + * + * Copyright 2010 Freescale Semiconductor, Inc. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. */ -#include <linux/types.h> - -#include <asm/hw_irq.h> - -#define MAX_HWEVENTS 8 -#define MAX_EVENT_ALTERNATIVES 8 -#define MAX_LIMITED_HWCOUNTERS 2 - -/* - * This struct provides the constants and functions needed to - * describe the PMU on a particular POWER-family CPU. - */ -struct power_pmu { - const char *name; - int n_counter; - int max_alternatives; - unsigned long add_fields; - unsigned long test_adder; - int (*compute_mmcr)(u64 events[], int n_ev, - unsigned int hwc[], unsigned long mmcr[]); - int (*get_constraint)(u64 event_id, unsigned long *mskp, - unsigned long *valp); - int (*get_alternatives)(u64 event_id, unsigned int flags, - u64 alt[]); - void (*disable_pmc)(unsigned int pmc, unsigned long mmcr[]); - int (*limited_pmc_event)(u64 event_id); - u32 flags; - int n_generic; - int *generic_events; - int (*cache_events)[PERF_COUNT_HW_CACHE_MAX] - [PERF_COUNT_HW_CACHE_OP_MAX] - [PERF_COUNT_HW_CACHE_RESULT_MAX]; -}; - -/* - * Values for power_pmu.flags - */ -#define PPMU_LIMITED_PMC5_6 1 /* PMC5/6 have limited function */ -#define PPMU_ALT_SIPR 2 /* uses alternate posn for SIPR/HV */ - -/* - * Values for flags to get_alternatives() - */ -#define PPMU_LIMITED_PMC_OK 1 /* can put this on a limited PMC */ -#define PPMU_LIMITED_PMC_REQD 2 /* have to put this on a limited PMC */ -#define PPMU_ONLY_COUNT_RUN 4 /* only counting in run state */ - -extern int register_power_pmu(struct power_pmu *); -struct pt_regs; -extern unsigned long perf_misc_flags(struct pt_regs *regs); -extern unsigned long perf_instruction_pointer(struct pt_regs *regs); - -#define PERF_EVENT_INDEX_OFFSET 1 - -/* - * Only override the default definitions in include/linux/perf_event.h - * if we have hardware PMU support. - */ #ifdef CONFIG_PPC_PERF_CTRS -#define perf_misc_flags(regs) perf_misc_flags(regs) +#include <asm/perf_event_server.h> #endif -/* - * The power_pmu.get_constraint function returns a 32/64-bit value and - * a 32/64-bit mask that express the constraints between this event_id and - * other events. - * - * The value and mask are divided up into (non-overlapping) bitfields - * of three different types: - * - * Select field: this expresses the constraint that some set of bits - * in MMCR* needs to be set to a specific value for this event_id. For a - * select field, the mask contains 1s in every bit of the field, and - * the value contains a unique value for each possible setting of the - * MMCR* bits. The constraint checking code will ensure that two events - * that set the same field in their masks have the same value in their - * value dwords. - * - * Add field: this expresses the constraint that there can be at most - * N events in a particular class. A field of k bits can be used for - * N <= 2^(k-1) - 1. The mask has the most significant bit of the field - * set (and the other bits 0), and the value has only the least significant - * bit of the field set. In addition, the 'add_fields' and 'test_adder' - * in the struct power_pmu for this processor come into play. The - * add_fields value contains 1 in the LSB of the field, and the - * test_adder contains 2^(k-1) - 1 - N in the field. - * - * NAND field: this expresses the constraint that you may not have events - * in all of a set of classes. (For example, on PPC970, you can't select - * events from the FPU, ISU and IDU simultaneously, although any two are - * possible.) For N classes, the field is N+1 bits wide, and each class - * is assigned one bit from the least-significant N bits. The mask has - * only the most-significant bit set, and the value has only the bit - * for the event_id's class set. The test_adder has the least significant - * bit set in the field. - * - * If an event_id is not subject to the constraint expressed by a particular - * field, then it will have 0 in both the mask and value for that field. - */ +#ifdef CONFIG_FSL_EMB_PERF_EVENT +#include <asm/perf_event_fsl_emb.h> +#endif diff --git a/arch/powerpc/include/asm/perf_event_fsl_emb.h b/arch/powerpc/include/asm/perf_event_fsl_emb.h new file mode 100644 index 000000000000..718a9fa94e68 --- /dev/null +++ b/arch/powerpc/include/asm/perf_event_fsl_emb.h @@ -0,0 +1,50 @@ +/* + * Performance event support - Freescale embedded specific definitions. + * + * Copyright 2008-2009 Paul Mackerras, IBM Corporation. + * Copyright 2010 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <linux/types.h> +#include <asm/hw_irq.h> + +#define MAX_HWEVENTS 4 + +/* event flags */ +#define FSL_EMB_EVENT_VALID 1 +#define FSL_EMB_EVENT_RESTRICTED 2 + +/* upper half of event flags is PMLCb */ +#define FSL_EMB_EVENT_THRESHMUL 0x0000070000000000ULL +#define FSL_EMB_EVENT_THRESH 0x0000003f00000000ULL + +struct fsl_emb_pmu { + const char *name; + int n_counter; /* total number of counters */ + + /* + * The number of contiguous counters starting at zero that + * can hold restricted events, or zero if there are no + * restricted events. + * + * This isn't a very flexible method of expressing constraints, + * but it's very simple and is adequate for existing chips. + */ + int n_restricted; + + /* Returns event flags and PMLCb (FSL_EMB_EVENT_*) */ + u64 (*xlate_event)(u64 event_id); + + int n_generic; + int *generic_events; + int (*cache_events)[PERF_COUNT_HW_CACHE_MAX] + [PERF_COUNT_HW_CACHE_OP_MAX] + [PERF_COUNT_HW_CACHE_RESULT_MAX]; +}; + +int register_fsl_emb_pmu(struct fsl_emb_pmu *); diff --git a/arch/powerpc/include/asm/perf_event_server.h b/arch/powerpc/include/asm/perf_event_server.h new file mode 100644 index 000000000000..8f1df1208d23 --- /dev/null +++ b/arch/powerpc/include/asm/perf_event_server.h @@ -0,0 +1,110 @@ +/* + * Performance event support - PowerPC classic/server specific definitions. + * + * Copyright 2008-2009 Paul Mackerras, IBM Corporation. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <linux/types.h> +#include <asm/hw_irq.h> + +#define MAX_HWEVENTS 8 +#define MAX_EVENT_ALTERNATIVES 8 +#define MAX_LIMITED_HWCOUNTERS 2 + +/* + * This struct provides the constants and functions needed to + * describe the PMU on a particular POWER-family CPU. + */ +struct power_pmu { + const char *name; + int n_counter; + int max_alternatives; + unsigned long add_fields; + unsigned long test_adder; + int (*compute_mmcr)(u64 events[], int n_ev, + unsigned int hwc[], unsigned long mmcr[]); + int (*get_constraint)(u64 event_id, unsigned long *mskp, + unsigned long *valp); + int (*get_alternatives)(u64 event_id, unsigned int flags, + u64 alt[]); + void (*disable_pmc)(unsigned int pmc, unsigned long mmcr[]); + int (*limited_pmc_event)(u64 event_id); + u32 flags; + int n_generic; + int *generic_events; + int (*cache_events)[PERF_COUNT_HW_CACHE_MAX] + [PERF_COUNT_HW_CACHE_OP_MAX] + [PERF_COUNT_HW_CACHE_RESULT_MAX]; +}; + +/* + * Values for power_pmu.flags + */ +#define PPMU_LIMITED_PMC5_6 1 /* PMC5/6 have limited function */ +#define PPMU_ALT_SIPR 2 /* uses alternate posn for SIPR/HV */ + +/* + * Values for flags to get_alternatives() + */ +#define PPMU_LIMITED_PMC_OK 1 /* can put this on a limited PMC */ +#define PPMU_LIMITED_PMC_REQD 2 /* have to put this on a limited PMC */ +#define PPMU_ONLY_COUNT_RUN 4 /* only counting in run state */ + +extern int register_power_pmu(struct power_pmu *); + +struct pt_regs; +extern unsigned long perf_misc_flags(struct pt_regs *regs); +extern unsigned long perf_instruction_pointer(struct pt_regs *regs); + +#define PERF_EVENT_INDEX_OFFSET 1 + +/* + * Only override the default definitions in include/linux/perf_event.h + * if we have hardware PMU support. + */ +#ifdef CONFIG_PPC_PERF_CTRS +#define perf_misc_flags(regs) perf_misc_flags(regs) +#endif + +/* + * The power_pmu.get_constraint function returns a 32/64-bit value and + * a 32/64-bit mask that express the constraints between this event_id and + * other events. + * + * The value and mask are divided up into (non-overlapping) bitfields + * of three different types: + * + * Select field: this expresses the constraint that some set of bits + * in MMCR* needs to be set to a specific value for this event_id. For a + * select field, the mask contains 1s in every bit of the field, and + * the value contains a unique value for each possible setting of the + * MMCR* bits. The constraint checking code will ensure that two events + * that set the same field in their masks have the same value in their + * value dwords. + * + * Add field: this expresses the constraint that there can be at most + * N events in a particular class. A field of k bits can be used for + * N <= 2^(k-1) - 1. The mask has the most significant bit of the field + * set (and the other bits 0), and the value has only the least significant + * bit of the field set. In addition, the 'add_fields' and 'test_adder' + * in the struct power_pmu for this processor come into play. The + * add_fields value contains 1 in the LSB of the field, and the + * test_adder contains 2^(k-1) - 1 - N in the field. + * + * NAND field: this expresses the constraint that you may not have events + * in all of a set of classes. (For example, on PPC970, you can't select + * events from the FPU, ISU and IDU simultaneously, although any two are + * possible.) For N classes, the field is N+1 bits wide, and each class + * is assigned one bit from the least-significant N bits. The mask has + * only the most-significant bit set, and the value has only the bit + * for the event_id's class set. The test_adder has the least significant + * bit set in the field. + * + * If an event_id is not subject to the constraint expressed by a particular + * field, then it will have 0 in both the mask and value for that field. + */ diff --git a/arch/powerpc/include/asm/ppc-opcode.h b/arch/powerpc/include/asm/ppc-opcode.h index aea714797590..d553bbeb726c 100644 --- a/arch/powerpc/include/asm/ppc-opcode.h +++ b/arch/powerpc/include/asm/ppc-opcode.h @@ -25,7 +25,7 @@ #define PPC_INST_LDARX 0x7c0000a8 #define PPC_INST_LSWI 0x7c0004aa #define PPC_INST_LSWX 0x7c00042a -#define PPC_INST_LWARX 0x7c000029 +#define PPC_INST_LWARX 0x7c000028 #define PPC_INST_LWSYNC 0x7c2004ac #define PPC_INST_LXVD2X 0x7c000698 #define PPC_INST_MCRXR 0x7c000400 @@ -62,8 +62,8 @@ #define __PPC_T_TLB(t) (((t) & 0x3) << 21) #define __PPC_WC(w) (((w) & 0x3) << 21) /* - * Only use the larx hint bit on 64bit CPUs. Once we verify it doesn't have - * any side effects on all 32bit processors, we can do this all the time. + * Only use the larx hint bit on 64bit CPUs. e500v1/v2 based CPUs will treat a + * larx with EH set as an illegal instruction. */ #ifdef CONFIG_PPC64 #define __PPC_EH(eh) (((eh) & 0x1) << 0) diff --git a/arch/powerpc/include/asm/ptrace.h b/arch/powerpc/include/asm/ptrace.h index b45108126562..9e2d84c06b74 100644 --- a/arch/powerpc/include/asm/ptrace.h +++ b/arch/powerpc/include/asm/ptrace.h @@ -137,15 +137,8 @@ do { \ } while (0) #endif /* __powerpc64__ */ -/* - * These are defined as per linux/ptrace.h, which see. - */ #define arch_has_single_step() (1) #define arch_has_block_step() (!cpu_has_feature(CPU_FTR_601)) -extern void user_enable_single_step(struct task_struct *); -extern void user_enable_block_step(struct task_struct *); -extern void user_disable_single_step(struct task_struct *); - #define ARCH_HAS_USER_SINGLE_STEP_INFO #endif /* __ASSEMBLY__ */ diff --git a/arch/powerpc/include/asm/reg_booke.h b/arch/powerpc/include/asm/reg_booke.h index 8808d307fe7e..414d434a66d0 100644 --- a/arch/powerpc/include/asm/reg_booke.h +++ b/arch/powerpc/include/asm/reg_booke.h @@ -421,8 +421,8 @@ /* Bit definitions related to the DBCR2. */ #define DBCR2_DAC1US 0xC0000000 /* Data Addr Cmp 1 Sup/User */ #define DBCR2_DAC1ER 0x30000000 /* Data Addr Cmp 1 Eff/Real */ -#define DBCR2_DAC2US 0x00000000 /* Data Addr Cmp 2 Sup/User */ -#define DBCR2_DAC2ER 0x00000000 /* Data Addr Cmp 2 Eff/Real */ +#define DBCR2_DAC2US 0x0C000000 /* Data Addr Cmp 2 Sup/User */ +#define DBCR2_DAC2ER 0x03000000 /* Data Addr Cmp 2 Eff/Real */ #define DBCR2_DAC12M 0x00800000 /* DAC 1-2 range enable */ #define DBCR2_DAC12MM 0x00400000 /* DAC 1-2 Mask mode*/ #define DBCR2_DAC12MX 0x00C00000 /* DAC 1-2 range eXclusive */ diff --git a/arch/powerpc/include/asm/reg_fsl_emb.h b/arch/powerpc/include/asm/reg_fsl_emb.h index 0de404dfee8b..77bb71cfd991 100644 --- a/arch/powerpc/include/asm/reg_fsl_emb.h +++ b/arch/powerpc/include/asm/reg_fsl_emb.h @@ -31,7 +31,7 @@ #define PMLCA_FCM0 0x08000000 /* Freeze when PMM==0 */ #define PMLCA_CE 0x04000000 /* Condition Enable */ -#define PMLCA_EVENT_MASK 0x007f0000 /* Event field */ +#define PMLCA_EVENT_MASK 0x00ff0000 /* Event field */ #define PMLCA_EVENT_SHIFT 16 #define PMRN_PMLCB0 0x110 /* PM Local Control B0 */ diff --git a/arch/powerpc/include/asm/syscall.h b/arch/powerpc/include/asm/syscall.h index efa7f0b879f3..23913e902fc3 100644 --- a/arch/powerpc/include/asm/syscall.h +++ b/arch/powerpc/include/asm/syscall.h @@ -30,7 +30,7 @@ static inline void syscall_rollback(struct task_struct *task, static inline long syscall_get_error(struct task_struct *task, struct pt_regs *regs) { - return (regs->ccr & 0x1000) ? -regs->gpr[3] : 0; + return (regs->ccr & 0x10000000) ? -regs->gpr[3] : 0; } static inline long syscall_get_return_value(struct task_struct *task, @@ -44,10 +44,10 @@ static inline void syscall_set_return_value(struct task_struct *task, int error, long val) { if (error) { - regs->ccr |= 0x1000L; + regs->ccr |= 0x10000000L; regs->gpr[3] = -error; } else { - regs->ccr &= ~0x1000L; + regs->ccr &= ~0x10000000L; regs->gpr[3] = val; } } diff --git a/arch/powerpc/include/asm/syscalls.h b/arch/powerpc/include/asm/syscalls.h index eb8eb400c664..4084e567d28e 100644 --- a/arch/powerpc/include/asm/syscalls.h +++ b/arch/powerpc/include/asm/syscalls.h @@ -7,7 +7,6 @@ #include <linux/types.h> #include <asm/signal.h> -struct new_utsname; struct pt_regs; struct rtas_args; struct sigaction; @@ -35,12 +34,9 @@ asmlinkage long sys_pipe2(int __user *fildes, int flags); asmlinkage long sys_rt_sigaction(int sig, const struct sigaction __user *act, struct sigaction __user *oact, size_t sigsetsize); -asmlinkage int sys_ipc(uint call, int first, unsigned long second, - long third, void __user *ptr, long fifth); asmlinkage long ppc64_personality(unsigned long personality); asmlinkage int ppc_rtas(struct rtas_args __user *uargs); asmlinkage time_t sys64_time(time_t __user * tloc); -asmlinkage long ppc_newuname(struct new_utsname __user * name); asmlinkage long sys_rt_sigsuspend(sigset_t __user *unewset, size_t sigsetsize); diff --git a/arch/powerpc/include/asm/systbl.h b/arch/powerpc/include/asm/systbl.h index 07d2d19ab5e9..a5ee345b6a5c 100644 --- a/arch/powerpc/include/asm/systbl.h +++ b/arch/powerpc/include/asm/systbl.h @@ -125,7 +125,7 @@ SYSCALL_SPU(fsync) SYS32ONLY(sigreturn) PPC_SYS(clone) COMPAT_SYS_SPU(setdomainname) -PPC_SYS_SPU(newuname) +SYSCALL_SPU(newuname) SYSCALL(ni_syscall) COMPAT_SYS_SPU(adjtimex) SYSCALL_SPU(mprotect) diff --git a/arch/powerpc/include/asm/unistd.h b/arch/powerpc/include/asm/unistd.h index f6ca76176766..f0a10266e7f7 100644 --- a/arch/powerpc/include/asm/unistd.h +++ b/arch/powerpc/include/asm/unistd.h @@ -364,6 +364,7 @@ #define __ARCH_WANT_STAT64 #define __ARCH_WANT_SYS_ALARM #define __ARCH_WANT_SYS_GETHOSTNAME +#define __ARCH_WANT_SYS_IPC #define __ARCH_WANT_SYS_PAUSE #define __ARCH_WANT_SYS_SGETMASK #define __ARCH_WANT_SYS_SIGNAL @@ -376,6 +377,7 @@ #define __ARCH_WANT_SYS_LLSEEK #define __ARCH_WANT_SYS_NICE #define __ARCH_WANT_SYS_OLD_GETRLIMIT +#define __ARCH_WANT_SYS_OLD_UNAME #define __ARCH_WANT_SYS_OLDUMOUNT #define __ARCH_WANT_SYS_SIGPENDING #define __ARCH_WANT_SYS_SIGPROCMASK diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index c002b0410219..877326320e74 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -98,11 +98,16 @@ obj64-$(CONFIG_AUDIT) += compat_audit.o obj-$(CONFIG_DYNAMIC_FTRACE) += ftrace.o obj-$(CONFIG_FUNCTION_GRAPH_TRACER) += ftrace.o -obj-$(CONFIG_PPC_PERF_CTRS) += perf_event.o perf_callchain.o +obj-$(CONFIG_PERF_EVENTS) += perf_callchain.o + +obj-$(CONFIG_PPC_PERF_CTRS) += perf_event.o obj64-$(CONFIG_PPC_PERF_CTRS) += power4-pmu.o ppc970-pmu.o power5-pmu.o \ power5+-pmu.o power6-pmu.o power7-pmu.o obj32-$(CONFIG_PPC_PERF_CTRS) += mpc7450-pmu.o +obj-$(CONFIG_FSL_EMB_PERF_EVENT) += perf_event_fsl_emb.o +obj-$(CONFIG_FSL_EMB_PERF_EVENT_E500) += e500-pmu.o + obj-$(CONFIG_8XX_MINIMAL_FPEMU) += softemu8xx.o ifneq ($(CONFIG_PPC_INDIRECT_IO),y) diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c index 2fc82bac3bbc..8af4949434b2 100644 --- a/arch/powerpc/kernel/cputable.c +++ b/arch/powerpc/kernel/cputable.c @@ -1808,7 +1808,7 @@ static struct cpu_spec __initdata cpu_specs[] = { .icache_bsize = 64, .dcache_bsize = 64, .num_pmcs = 4, - .oprofile_cpu_type = "ppc/e500", /* xxx - galak, e500mc? */ + .oprofile_cpu_type = "ppc/e500mc", .oprofile_type = PPC_OPROFILE_FSL_EMB, .cpu_setup = __setup_cpu_e500mc, .machine_check = machine_check_e500, diff --git a/arch/powerpc/kernel/e500-pmu.c b/arch/powerpc/kernel/e500-pmu.c new file mode 100644 index 000000000000..7c07de0d8943 --- /dev/null +++ b/arch/powerpc/kernel/e500-pmu.c @@ -0,0 +1,129 @@ +/* + * Performance counter support for e500 family processors. + * + * Copyright 2008-2009 Paul Mackerras, IBM Corporation. + * Copyright 2010 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#include <linux/string.h> +#include <linux/perf_event.h> +#include <asm/reg.h> +#include <asm/cputable.h> + +/* + * Map of generic hardware event types to hardware events + * Zero if unsupported + */ +static int e500_generic_events[] = { + [PERF_COUNT_HW_CPU_CYCLES] = 1, + [PERF_COUNT_HW_INSTRUCTIONS] = 2, + [PERF_COUNT_HW_CACHE_MISSES] = 41, /* Data L1 cache reloads */ + [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = 12, + [PERF_COUNT_HW_BRANCH_MISSES] = 15, +}; + +#define C(x) PERF_COUNT_HW_CACHE_##x + +/* + * Table of generalized cache-related events. + * 0 means not supported, -1 means nonsensical, other values + * are event codes. + */ +static int e500_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = { + /* + * D-cache misses are not split into read/write/prefetch; + * use raw event 41. + */ + [C(L1D)] = { /* RESULT_ACCESS RESULT_MISS */ + [C(OP_READ)] = { 27, 0 }, + [C(OP_WRITE)] = { 28, 0 }, + [C(OP_PREFETCH)] = { 29, 0 }, + }, + [C(L1I)] = { /* RESULT_ACCESS RESULT_MISS */ + [C(OP_READ)] = { 2, 60 }, + [C(OP_WRITE)] = { -1, -1 }, + [C(OP_PREFETCH)] = { 0, 0 }, + }, + /* + * Assuming LL means L2, it's not a good match for this model. + * It allocates only on L1 castout or explicit prefetch, and + * does not have separate read/write events (but it does have + * separate instruction/data events). + */ + [C(LL)] = { /* RESULT_ACCESS RESULT_MISS */ + [C(OP_READ)] = { 0, 0 }, + [C(OP_WRITE)] = { 0, 0 }, + [C(OP_PREFETCH)] = { 0, 0 }, + }, + /* + * There are data/instruction MMU misses, but that's a miss on + * the chip's internal level-one TLB which is probably not + * what the user wants. Instead, unified level-two TLB misses + * are reported here. + */ + [C(DTLB)] = { /* RESULT_ACCESS RESULT_MISS */ + [C(OP_READ)] = { 26, 66 }, + [C(OP_WRITE)] = { -1, -1 }, + [C(OP_PREFETCH)] = { -1, -1 }, + }, + [C(BPU)] = { /* RESULT_ACCESS RESULT_MISS */ + [C(OP_READ)] = { 12, 15 }, + [C(OP_WRITE)] = { -1, -1 }, + [C(OP_PREFETCH)] = { -1, -1 }, + }, +}; + +static int num_events = 128; + +/* Upper half of event id is PMLCb, for threshold events */ +static u64 e500_xlate_event(u64 event_id) +{ + u32 event_low = (u32)event_id; + u64 ret; + + if (event_low >= num_events) + return 0; + + ret = FSL_EMB_EVENT_VALID; + + if (event_low >= 76 && event_low <= 81) { + ret |= FSL_EMB_EVENT_RESTRICTED; + ret |= event_id & + (FSL_EMB_EVENT_THRESHMUL | FSL_EMB_EVENT_THRESH); + } else if (event_id & + (FSL_EMB_EVENT_THRESHMUL | FSL_EMB_EVENT_THRESH)) { + /* Threshold requested on non-threshold event */ + return 0; + } + + return ret; +} + +static struct fsl_emb_pmu e500_pmu = { + .name = "e500 family", + .n_counter = 4, + .n_restricted = 2, + .xlate_event = e500_xlate_event, + .n_generic = ARRAY_SIZE(e500_generic_events), + .generic_events = e500_generic_events, + .cache_events = &e500_cache_events, +}; + +static int init_e500_pmu(void) +{ + if (!cur_cpu_spec->oprofile_cpu_type) + return -ENODEV; + + if (!strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc/e500mc")) + num_events = 256; + else if (strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc/e500")) + return -ENODEV; + + return register_fsl_emb_pmu(&e500_pmu); +} + +arch_initcall(init_e500_pmu); diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S index 925807488022..bed9a29ee383 100644 --- a/arch/powerpc/kernel/head_64.S +++ b/arch/powerpc/kernel/head_64.S @@ -219,7 +219,8 @@ generic_secondary_common_init: * physical cpu id in r24, we need to search the pacas to find * which logical id maps to our physical one. */ - LOAD_REG_ADDR(r13, paca) /* Get base vaddr of paca array */ + LOAD_REG_ADDR(r13, paca) /* Load paca pointer */ + ld r13,0(r13) /* Get base vaddr of paca array */ li r5,0 /* logical cpu id */ 1: lhz r6,PACAHWCPUID(r13) /* Load HW procid from paca */ cmpw r6,r24 /* Compare to our id */ @@ -536,7 +537,8 @@ _GLOBAL(pmac_secondary_start) mtmsrd r3 /* RI on */ /* Set up a paca value for this processor. */ - LOAD_REG_ADDR(r4,paca) /* Get base vaddr of paca array */ + LOAD_REG_ADDR(r4,paca) /* Load paca pointer */ + ld r4,0(r4) /* Get base vaddr of paca array */ mulli r13,r24,PACA_SIZE /* Calculate vaddr of right paca */ add r13,r13,r4 /* for this processor. */ mtspr SPRN_SPRG_PACA,r13 /* Save vaddr of paca in an SPRG*/ @@ -615,6 +617,17 @@ _GLOBAL(start_secondary_prolog) std r3,0(r1) /* Zero the stack frame pointer */ bl .start_secondary b . +/* + * Reset stack pointer and call start_secondary + * to continue with online operation when woken up + * from cede in cpu offline. + */ +_GLOBAL(start_secondary_resume) + ld r1,PACAKSAVE(r13) /* Reload kernel stack pointer */ + li r3,0 + std r3,0(r1) /* Zero the stack frame pointer */ + bl .start_secondary + b . #endif /* diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S index 25793bb0e782..725526547994 100644 --- a/arch/powerpc/kernel/head_fsl_booke.S +++ b/arch/powerpc/kernel/head_fsl_booke.S @@ -747,9 +747,6 @@ finish_tlb_load: #else rlwimi r12, r11, 26, 27, 31 /* extract WIMGE from pte */ #endif -#ifdef CONFIG_SMP - ori r12, r12, MAS2_M -#endif mtspr SPRN_MAS2, r12 #ifdef CONFIG_PTE_64BIT @@ -887,13 +884,17 @@ KernelSPE: lwz r3,_MSR(r1) oris r3,r3,MSR_SPE@h stw r3,_MSR(r1) /* enable use of SPE after return */ +#ifdef CONFIG_PRINTK lis r3,87f@h ori r3,r3,87f@l mr r4,r2 /* current */ lwz r5,_NIP(r1) bl printk +#endif b ret_from_except +#ifdef CONFIG_PRINTK 87: .string "SPE used in kernel (task=%p, pc=%x) \n" +#endif .align 4,0 #endif /* CONFIG_SPE */ diff --git a/arch/powerpc/kernel/iommu.c b/arch/powerpc/kernel/iommu.c index 5547ae6e6b0b..ec94f906ea43 100644 --- a/arch/powerpc/kernel/iommu.c +++ b/arch/powerpc/kernel/iommu.c @@ -42,12 +42,7 @@ #define DBG(...) -#ifdef CONFIG_IOMMU_VMERGE -static int novmerge = 0; -#else -static int novmerge = 1; -#endif - +static int novmerge; static int protect4gb = 1; static void __iommu_free(struct iommu_table *, dma_addr_t, unsigned int); diff --git a/arch/powerpc/kernel/legacy_serial.c b/arch/powerpc/kernel/legacy_serial.c index 9ddfaef1a184..035ada5443ee 100644 --- a/arch/powerpc/kernel/legacy_serial.c +++ b/arch/powerpc/kernel/legacy_serial.c @@ -469,7 +469,7 @@ static int __init serial_dev_init(void) return -ENODEV; /* - * Before we register the platfrom serial devices, we need + * Before we register the platform serial devices, we need * to fixup their interrupts and their IO ports. */ DBG("Fixing serial ports interrupts and IO ports ...\n"); diff --git a/arch/powerpc/kernel/paca.c b/arch/powerpc/kernel/paca.c index d16b1ea55d44..0c40c6f476fe 100644 --- a/arch/powerpc/kernel/paca.c +++ b/arch/powerpc/kernel/paca.c @@ -9,11 +9,15 @@ #include <linux/threads.h> #include <linux/module.h> +#include <linux/lmb.h> +#include <asm/firmware.h> #include <asm/lppaca.h> #include <asm/paca.h> #include <asm/sections.h> #include <asm/pgtable.h> +#include <asm/iseries/lpar_map.h> +#include <asm/iseries/hv_types.h> /* This symbol is provided by the linker - let it fill in the paca * field correctly */ @@ -70,37 +74,82 @@ struct slb_shadow slb_shadow[] __cacheline_aligned = { * processors. The processor VPD array needs one entry per physical * processor (not thread). */ -struct paca_struct paca[NR_CPUS]; +struct paca_struct *paca; EXPORT_SYMBOL(paca); -void __init initialise_pacas(void) -{ - int cpu; +struct paca_struct boot_paca; - /* The TOC register (GPR2) points 32kB into the TOC, so that 64kB - * of the TOC can be addressed using a single machine instruction. - */ +void __init initialise_paca(struct paca_struct *new_paca, int cpu) +{ + /* The TOC register (GPR2) points 32kB into the TOC, so that 64kB + * of the TOC can be addressed using a single machine instruction. + */ unsigned long kernel_toc = (unsigned long)(&__toc_start) + 0x8000UL; - /* Can't use for_each_*_cpu, as they aren't functional yet */ - for (cpu = 0; cpu < NR_CPUS; cpu++) { - struct paca_struct *new_paca = &paca[cpu]; - #ifdef CONFIG_PPC_BOOK3S - new_paca->lppaca_ptr = &lppaca[cpu]; + new_paca->lppaca_ptr = &lppaca[cpu]; #else - new_paca->kernel_pgd = swapper_pg_dir; + new_paca->kernel_pgd = swapper_pg_dir; #endif - new_paca->lock_token = 0x8000; - new_paca->paca_index = cpu; - new_paca->kernel_toc = kernel_toc; - new_paca->kernelbase = (unsigned long) _stext; - new_paca->kernel_msr = MSR_KERNEL; - new_paca->hw_cpu_id = 0xffff; - new_paca->__current = &init_task; + new_paca->lock_token = 0x8000; + new_paca->paca_index = cpu; + new_paca->kernel_toc = kernel_toc; + new_paca->kernelbase = (unsigned long) _stext; + new_paca->kernel_msr = MSR_KERNEL; + new_paca->hw_cpu_id = 0xffff; + new_paca->__current = &init_task; #ifdef CONFIG_PPC_STD_MMU_64 - new_paca->slb_shadow_ptr = &slb_shadow[cpu]; + new_paca->slb_shadow_ptr = &slb_shadow[cpu]; #endif /* CONFIG_PPC_STD_MMU_64 */ +} + +static int __initdata paca_size; + +void __init allocate_pacas(void) +{ + int nr_cpus, cpu, limit; + + /* + * We can't take SLB misses on the paca, and we want to access them + * in real mode, so allocate them within the RMA and also within + * the first segment. On iSeries they must be within the area mapped + * by the HV, which is HvPagesToMap * HVPAGESIZE bytes. + */ + limit = min(0x10000000ULL, lmb.rmo_size); + if (firmware_has_feature(FW_FEATURE_ISERIES)) + limit = min(limit, HvPagesToMap * HVPAGESIZE); + + nr_cpus = NR_CPUS; + /* On iSeries we know we can never have more than 64 cpus */ + if (firmware_has_feature(FW_FEATURE_ISERIES)) + nr_cpus = min(64, nr_cpus); + + paca_size = PAGE_ALIGN(sizeof(struct paca_struct) * nr_cpus); + + paca = __va(lmb_alloc_base(paca_size, PAGE_SIZE, limit)); + memset(paca, 0, paca_size); + + printk(KERN_DEBUG "Allocated %u bytes for %d pacas at %p\n", + paca_size, nr_cpus, paca); + + /* Can't use for_each_*_cpu, as they aren't functional yet */ + for (cpu = 0; cpu < nr_cpus; cpu++) + initialise_paca(&paca[cpu], cpu); +} + +void __init free_unused_pacas(void) +{ + int new_size; + + new_size = PAGE_ALIGN(sizeof(struct paca_struct) * num_possible_cpus()); + + if (new_size >= paca_size) + return; + + lmb_free(__pa(paca) + new_size, paca_size - new_size); + + printk(KERN_DEBUG "Freed %u bytes for unused pacas\n", + paca_size - new_size); - } + paca_size = new_size; } diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c index 2597f9545d8a..f3c42ce516e7 100644 --- a/arch/powerpc/kernel/pci-common.c +++ b/arch/powerpc/kernel/pci-common.c @@ -63,21 +63,6 @@ struct dma_map_ops *get_pci_dma_ops(void) } EXPORT_SYMBOL(get_pci_dma_ops); -int pci_set_dma_mask(struct pci_dev *dev, u64 mask) -{ - return dma_set_mask(&dev->dev, mask); -} - -int pci_set_consistent_dma_mask(struct pci_dev *dev, u64 mask) -{ - int rc; - - rc = dma_set_mask(&dev->dev, mask); - dev->dev.coherent_dma_mask = dev->dma_mask; - - return rc; -} - struct pci_controller *pcibios_alloc_controller(struct device_node *dev) { struct pci_controller *phb; diff --git a/arch/powerpc/kernel/perf_event_fsl_emb.c b/arch/powerpc/kernel/perf_event_fsl_emb.c new file mode 100644 index 000000000000..369872f6cf78 --- /dev/null +++ b/arch/powerpc/kernel/perf_event_fsl_emb.c @@ -0,0 +1,654 @@ +/* + * Performance event support - Freescale Embedded Performance Monitor + * + * Copyright 2008-2009 Paul Mackerras, IBM Corporation. + * Copyright 2010 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/perf_event.h> +#include <linux/percpu.h> +#include <linux/hardirq.h> +#include <asm/reg_fsl_emb.h> +#include <asm/pmc.h> +#include <asm/machdep.h> +#include <asm/firmware.h> +#include <asm/ptrace.h> + +struct cpu_hw_events { + int n_events; + int disabled; + u8 pmcs_enabled; + struct perf_event *event[MAX_HWEVENTS]; +}; +static DEFINE_PER_CPU(struct cpu_hw_events, cpu_hw_events); + +static struct fsl_emb_pmu *ppmu; + +/* Number of perf_events counting hardware events */ +static atomic_t num_events; +/* Used to avoid races in calling reserve/release_pmc_hardware */ +static DEFINE_MUTEX(pmc_reserve_mutex); + +/* + * If interrupts were soft-disabled when a PMU interrupt occurs, treat + * it as an NMI. + */ +static inline int perf_intr_is_nmi(struct pt_regs *regs) +{ +#ifdef __powerpc64__ + return !regs->softe; +#else + return 0; +#endif +} + +static void perf_event_interrupt(struct pt_regs *regs); + +/* + * Read one performance monitor counter (PMC). + */ +static unsigned long read_pmc(int idx) +{ + unsigned long val; + + switch (idx) { + case 0: + val = mfpmr(PMRN_PMC0); + break; + case 1: + val = mfpmr(PMRN_PMC1); + break; + case 2: + val = mfpmr(PMRN_PMC2); + break; + case 3: + val = mfpmr(PMRN_PMC3); + break; + default: + printk(KERN_ERR "oops trying to read PMC%d\n", idx); + val = 0; + } + return val; +} + +/* + * Write one PMC. + */ +static void write_pmc(int idx, unsigned long val) +{ + switch (idx) { + case 0: + mtpmr(PMRN_PMC0, val); + break; + case 1: + mtpmr(PMRN_PMC1, val); + break; + case 2: + mtpmr(PMRN_PMC2, val); + break; + case 3: + mtpmr(PMRN_PMC3, val); + break; + default: + printk(KERN_ERR "oops trying to write PMC%d\n", idx); + } + + isync(); +} + +/* + * Write one local control A register + */ +static void write_pmlca(int idx, unsigned long val) +{ + switch (idx) { + case 0: + mtpmr(PMRN_PMLCA0, val); + break; + case 1: + mtpmr(PMRN_PMLCA1, val); + break; + case 2: + mtpmr(PMRN_PMLCA2, val); + break; + case 3: + mtpmr(PMRN_PMLCA3, val); + break; + default: + printk(KERN_ERR "oops trying to write PMLCA%d\n", idx); + } + + isync(); +} + +/* + * Write one local control B register + */ +static void write_pmlcb(int idx, unsigned long val) +{ + switch (idx) { + case 0: + mtpmr(PMRN_PMLCB0, val); + break; + case 1: + mtpmr(PMRN_PMLCB1, val); + break; + case 2: + mtpmr(PMRN_PMLCB2, val); + break; + case 3: + mtpmr(PMRN_PMLCB3, val); + break; + default: + printk(KERN_ERR "oops trying to write PMLCB%d\n", idx); + } + + isync(); +} + +static void fsl_emb_pmu_read(struct perf_event *event) +{ + s64 val, delta, prev; + + /* + * Performance monitor interrupts come even when interrupts + * are soft-disabled, as long as interrupts are hard-enabled. + * Therefore we treat them like NMIs. + */ + do { + prev = atomic64_read(&event->hw.prev_count); + barrier(); + val = read_pmc(event->hw.idx); + } while (atomic64_cmpxchg(&event->hw.prev_count, prev, val) != prev); + + /* The counters are only 32 bits wide */ + delta = (val - prev) & 0xfffffffful; + atomic64_add(delta, &event->count); + atomic64_sub(delta, &event->hw.period_left); +} + +/* + * Disable all events to prevent PMU interrupts and to allow + * events to be added or removed. + */ +void hw_perf_disable(void) +{ + struct cpu_hw_events *cpuhw; + unsigned long flags; + + local_irq_save(flags); + cpuhw = &__get_cpu_var(cpu_hw_events); + + if (!cpuhw->disabled) { + cpuhw->disabled = 1; + + /* + * Check if we ever enabled the PMU on this cpu. + */ + if (!cpuhw->pmcs_enabled) { + ppc_enable_pmcs(); + cpuhw->pmcs_enabled = 1; + } + + if (atomic_read(&num_events)) { + /* + * Set the 'freeze all counters' bit, and disable + * interrupts. The barrier is to make sure the + * mtpmr has been executed and the PMU has frozen + * the events before we return. + */ + + mtpmr(PMRN_PMGC0, PMGC0_FAC); + isync(); + } + } + local_irq_restore(flags); +} + +/* + * Re-enable all events if disable == 0. + * If we were previously disabled and events were added, then + * put the new config on the PMU. + */ +void hw_perf_enable(void) +{ + struct cpu_hw_events *cpuhw; + unsigned long flags; + + local_irq_save(flags); + cpuhw = &__get_cpu_var(cpu_hw_events); + if (!cpuhw->disabled) + goto out; + + cpuhw->disabled = 0; + ppc_set_pmu_inuse(cpuhw->n_events != 0); + + if (cpuhw->n_events > 0) { + mtpmr(PMRN_PMGC0, PMGC0_PMIE | PMGC0_FCECE); + isync(); + } + + out: + local_irq_restore(flags); +} + +static int collect_events(struct perf_event *group, int max_count, + struct perf_event *ctrs[]) +{ + int n = 0; + struct perf_event *event; + + if (!is_software_event(group)) { + if (n >= max_count) + return -1; + ctrs[n] = group; + n++; + } + list_for_each_entry(event, &group->sibling_list, group_entry) { + if (!is_software_event(event) && + event->state != PERF_EVENT_STATE_OFF) { + if (n >= max_count) + return -1; + ctrs[n] = event; + n++; + } + } + return n; +} + +/* perf must be disabled, context locked on entry */ +static int fsl_emb_pmu_enable(struct perf_event *event) +{ + struct cpu_hw_events *cpuhw; + int ret = -EAGAIN; + int num_counters = ppmu->n_counter; + u64 val; + int i; + + cpuhw = &get_cpu_var(cpu_hw_events); + + if (event->hw.config & FSL_EMB_EVENT_RESTRICTED) + num_counters = ppmu->n_restricted; + + /* + * Allocate counters from top-down, so that restricted-capable + * counters are kept free as long as possible. + */ + for (i = num_counters - 1; i >= 0; i--) { + if (cpuhw->event[i]) + continue; + + break; + } + + if (i < 0) + goto out; + + event->hw.idx = i; + cpuhw->event[i] = event; + ++cpuhw->n_events; + + val = 0; + if (event->hw.sample_period) { + s64 left = atomic64_read(&event->hw.period_left); + if (left < 0x80000000L) + val = 0x80000000L - left; + } + atomic64_set(&event->hw.prev_count, val); + write_pmc(i, val); + perf_event_update_userpage(event); + + write_pmlcb(i, event->hw.config >> 32); + write_pmlca(i, event->hw.config_base); + + ret = 0; + out: + put_cpu_var(cpu_hw_events); + return ret; +} + +/* perf must be disabled, context locked on entry */ +static void fsl_emb_pmu_disable(struct perf_event *event) +{ + struct cpu_hw_events *cpuhw; + int i = event->hw.idx; + + if (i < 0) + goto out; + + fsl_emb_pmu_read(event); + + cpuhw = &get_cpu_var(cpu_hw_events); + + WARN_ON(event != cpuhw->event[event->hw.idx]); + + write_pmlca(i, 0); + write_pmlcb(i, 0); + write_pmc(i, 0); + + cpuhw->event[i] = NULL; + event->hw.idx = -1; + + /* + * TODO: if at least one restricted event exists, and we + * just freed up a non-restricted-capable counter, and + * there is a restricted-capable counter occupied by + * a non-restricted event, migrate that event to the + * vacated counter. + */ + + cpuhw->n_events--; + + out: + put_cpu_var(cpu_hw_events); +} + +/* + * Re-enable interrupts on a event after they were throttled + * because they were coming too fast. + * + * Context is locked on entry, but perf is not disabled. + */ +static void fsl_emb_pmu_unthrottle(struct perf_event *event) +{ + s64 val, left; + unsigned long flags; + + if (event->hw.idx < 0 || !event->hw.sample_period) + return; + local_irq_save(flags); + perf_disable(); + fsl_emb_pmu_read(event); + left = event->hw.sample_period; + event->hw.last_period = left; + val = 0; + if (left < 0x80000000L) + val = 0x80000000L - left; + write_pmc(event->hw.idx, val); + atomic64_set(&event->hw.prev_count, val); + atomic64_set(&event->hw.period_left, left); + perf_event_update_userpage(event); + perf_enable(); + local_irq_restore(flags); +} + +static struct pmu fsl_emb_pmu = { + .enable = fsl_emb_pmu_enable, + .disable = fsl_emb_pmu_disable, + .read = fsl_emb_pmu_read, + .unthrottle = fsl_emb_pmu_unthrottle, +}; + +/* + * Release the PMU if this is the last perf_event. + */ +static void hw_perf_event_destroy(struct perf_event *event) +{ + if (!atomic_add_unless(&num_events, -1, 1)) { + mutex_lock(&pmc_reserve_mutex); + if (atomic_dec_return(&num_events) == 0) + release_pmc_hardware(); + mutex_unlock(&pmc_reserve_mutex); + } +} + +/* + * Translate a generic cache event_id config to a raw event_id code. + */ +static int hw_perf_cache_event(u64 config, u64 *eventp) +{ + unsigned long type, op, result; + int ev; + + if (!ppmu->cache_events) + return -EINVAL; + + /* unpack config */ + type = config & 0xff; + op = (config >> 8) & 0xff; + result = (config >> 16) & 0xff; + + if (type >= PERF_COUNT_HW_CACHE_MAX || + op >= PERF_COUNT_HW_CACHE_OP_MAX || + result >= PERF_COUNT_HW_CACHE_RESULT_MAX) + return -EINVAL; + + ev = (*ppmu->cache_events)[type][op][result]; + if (ev == 0) + return -EOPNOTSUPP; + if (ev == -1) + return -EINVAL; + *eventp = ev; + return 0; +} + +const struct pmu *hw_perf_event_init(struct perf_event *event) +{ + u64 ev; + struct perf_event *events[MAX_HWEVENTS]; + int n; + int err; + int num_restricted; + int i; + + switch (event->attr.type) { + case PERF_TYPE_HARDWARE: + ev = event->attr.config; + if (ev >= ppmu->n_generic || ppmu->generic_events[ev] == 0) + return ERR_PTR(-EOPNOTSUPP); + ev = ppmu->generic_events[ev]; + break; + + case PERF_TYPE_HW_CACHE: + err = hw_perf_cache_event(event->attr.config, &ev); + if (err) + return ERR_PTR(err); + break; + + case PERF_TYPE_RAW: + ev = event->attr.config; + break; + + default: + return ERR_PTR(-EINVAL); + } + + event->hw.config = ppmu->xlate_event(ev); + if (!(event->hw.config & FSL_EMB_EVENT_VALID)) + return ERR_PTR(-EINVAL); + + /* + * If this is in a group, check if it can go on with all the + * other hardware events in the group. We assume the event + * hasn't been linked into its leader's sibling list at this point. + */ + n = 0; + if (event->group_leader != event) { + n = collect_events(event->group_leader, + ppmu->n_counter - 1, events); + if (n < 0) + return ERR_PTR(-EINVAL); + } + + if (event->hw.config & FSL_EMB_EVENT_RESTRICTED) { + num_restricted = 0; + for (i = 0; i < n; i++) { + if (events[i]->hw.config & FSL_EMB_EVENT_RESTRICTED) + num_restricted++; + } + + if (num_restricted >= ppmu->n_restricted) + return ERR_PTR(-EINVAL); + } + + event->hw.idx = -1; + + event->hw.config_base = PMLCA_CE | PMLCA_FCM1 | + (u32)((ev << 16) & PMLCA_EVENT_MASK); + + if (event->attr.exclude_user) + event->hw.config_base |= PMLCA_FCU; + if (event->attr.exclude_kernel) + event->hw.config_base |= PMLCA_FCS; + if (event->attr.exclude_idle) + return ERR_PTR(-ENOTSUPP); + + event->hw.last_period = event->hw.sample_period; + atomic64_set(&event->hw.period_left, event->hw.last_period); + + /* + * See if we need to reserve the PMU. + * If no events are currently in use, then we have to take a + * mutex to ensure that we don't race with another task doing + * reserve_pmc_hardware or release_pmc_hardware. + */ + err = 0; + if (!atomic_inc_not_zero(&num_events)) { + mutex_lock(&pmc_reserve_mutex); + if (atomic_read(&num_events) == 0 && + reserve_pmc_hardware(perf_event_interrupt)) + err = -EBUSY; + else + atomic_inc(&num_events); + mutex_unlock(&pmc_reserve_mutex); + + mtpmr(PMRN_PMGC0, PMGC0_FAC); + isync(); + } + event->destroy = hw_perf_event_destroy; + + if (err) + return ERR_PTR(err); + return &fsl_emb_pmu; +} + +/* + * A counter has overflowed; update its count and record + * things if requested. Note that interrupts are hard-disabled + * here so there is no possibility of being interrupted. + */ +static void record_and_restart(struct perf_event *event, unsigned long val, + struct pt_regs *regs, int nmi) +{ + u64 period = event->hw.sample_period; + s64 prev, delta, left; + int record = 0; + + /* we don't have to worry about interrupts here */ + prev = atomic64_read(&event->hw.prev_count); + delta = (val - prev) & 0xfffffffful; + atomic64_add(delta, &event->count); + + /* + * See if the total period for this event has expired, + * and update for the next period. + */ + val = 0; + left = atomic64_read(&event->hw.period_left) - delta; + if (period) { + if (left <= 0) { + left += period; + if (left <= 0) + left = period; + record = 1; + } + if (left < 0x80000000LL) + val = 0x80000000LL - left; + } + + /* + * Finally record data if requested. + */ + if (record) { + struct perf_sample_data data = { + .period = event->hw.last_period, + }; + + if (perf_event_overflow(event, nmi, &data, regs)) { + /* + * Interrupts are coming too fast - throttle them + * by setting the event to 0, so it will be + * at least 2^30 cycles until the next interrupt + * (assuming each event counts at most 2 counts + * per cycle). + */ + val = 0; + left = ~0ULL >> 1; + } + } + + write_pmc(event->hw.idx, val); + atomic64_set(&event->hw.prev_count, val); + atomic64_set(&event->hw.period_left, left); + perf_event_update_userpage(event); +} + +static void perf_event_interrupt(struct pt_regs *regs) +{ + int i; + struct cpu_hw_events *cpuhw = &__get_cpu_var(cpu_hw_events); + struct perf_event *event; + unsigned long val; + int found = 0; + int nmi; + + nmi = perf_intr_is_nmi(regs); + if (nmi) + nmi_enter(); + else + irq_enter(); + + for (i = 0; i < ppmu->n_counter; ++i) { + event = cpuhw->event[i]; + + val = read_pmc(i); + if ((int)val < 0) { + if (event) { + /* event has overflowed */ + found = 1; + record_and_restart(event, val, regs, nmi); + } else { + /* + * Disabled counter is negative, + * reset it just in case. + */ + write_pmc(i, 0); + } + } + } + + /* PMM will keep counters frozen until we return from the interrupt. */ + mtmsr(mfmsr() | MSR_PMM); + mtpmr(PMRN_PMGC0, PMGC0_PMIE | PMGC0_FCECE); + isync(); + + if (nmi) + nmi_exit(); + else + irq_exit(); +} + +void hw_perf_event_setup(int cpu) +{ + struct cpu_hw_events *cpuhw = &per_cpu(cpu_hw_events, cpu); + + memset(cpuhw, 0, sizeof(*cpuhw)); +} + +int register_fsl_emb_pmu(struct fsl_emb_pmu *pmu) +{ + if (ppmu) + return -EBUSY; /* something's already registered */ + + ppmu = pmu; + pr_info("%s performance monitor hardware support registered\n", + pmu->name); + + return 0; +} diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c index 43238b2054b6..05131d634e73 100644 --- a/arch/powerpc/kernel/prom.c +++ b/arch/powerpc/kernel/prom.c @@ -43,6 +43,7 @@ #include <asm/smp.h> #include <asm/system.h> #include <asm/mmu.h> +#include <asm/paca.h> #include <asm/pgtable.h> #include <asm/pci.h> #include <asm/iommu.h> @@ -721,6 +722,8 @@ void __init early_init_devtree(void *params) * FIXME .. and the initrd too? */ move_device_tree(); + allocate_pacas(); + DBG("Scanning CPUs ...\n"); /* Retreive CPU related informations from the flat tree diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c index d9b05866615f..ed2cfe17d25e 100644 --- a/arch/powerpc/kernel/ptrace.c +++ b/arch/powerpc/kernel/ptrace.c @@ -940,7 +940,7 @@ static int del_instruction_bp(struct task_struct *child, int slot) { switch (slot) { case 1: - if (child->thread.iac1 == 0) + if ((child->thread.dbcr0 & DBCR0_IAC1) == 0) return -ENOENT; if (dbcr_iac_range(child) & DBCR_IAC12MODE) { @@ -952,7 +952,7 @@ static int del_instruction_bp(struct task_struct *child, int slot) child->thread.dbcr0 &= ~DBCR0_IAC1; break; case 2: - if (child->thread.iac2 == 0) + if ((child->thread.dbcr0 & DBCR0_IAC2) == 0) return -ENOENT; if (dbcr_iac_range(child) & DBCR_IAC12MODE) @@ -963,7 +963,7 @@ static int del_instruction_bp(struct task_struct *child, int slot) break; #if CONFIG_PPC_ADV_DEBUG_IACS > 2 case 3: - if (child->thread.iac3 == 0) + if ((child->thread.dbcr0 & DBCR0_IAC3) == 0) return -ENOENT; if (dbcr_iac_range(child) & DBCR_IAC34MODE) { @@ -975,7 +975,7 @@ static int del_instruction_bp(struct task_struct *child, int slot) child->thread.dbcr0 &= ~DBCR0_IAC3; break; case 4: - if (child->thread.iac4 == 0) + if ((child->thread.dbcr0 & DBCR0_IAC4) == 0) return -ENOENT; if (dbcr_iac_range(child) & DBCR_IAC34MODE) @@ -1054,7 +1054,7 @@ static int set_dac(struct task_struct *child, struct ppc_hw_breakpoint *bp_info) static int del_dac(struct task_struct *child, int slot) { if (slot == 1) { - if (child->thread.dac1 == 0) + if ((dbcr_dac(child) & (DBCR_DAC1R | DBCR_DAC1W)) == 0) return -ENOENT; child->thread.dac1 = 0; @@ -1070,7 +1070,7 @@ static int del_dac(struct task_struct *child, int slot) child->thread.dvc1 = 0; #endif } else if (slot == 2) { - if (child->thread.dac1 == 0) + if ((dbcr_dac(child) & (DBCR_DAC2R | DBCR_DAC2W)) == 0) return -ENOENT; #ifdef CONFIG_PPC_ADV_DEBUG_DAC_RANGE diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c index 03dd6a248198..48f0a008b20b 100644 --- a/arch/powerpc/kernel/setup-common.c +++ b/arch/powerpc/kernel/setup-common.c @@ -36,6 +36,7 @@ #include <linux/lmb.h> #include <linux/of_platform.h> #include <asm/io.h> +#include <asm/paca.h> #include <asm/prom.h> #include <asm/processor.h> #include <asm/vdso_datapage.h> @@ -493,6 +494,8 @@ void __init smp_setup_cpu_maps(void) * here will have to be reworked */ cpu_init_thread_core_maps(nthreads); + + free_unused_pacas(); } #endif /* CONFIG_SMP */ diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c index b152de3e64d4..8f58986c2ad9 100644 --- a/arch/powerpc/kernel/setup_32.c +++ b/arch/powerpc/kernel/setup_32.c @@ -39,7 +39,6 @@ #include <asm/serial.h> #include <asm/udbg.h> #include <asm/mmu_context.h> -#include <asm/swiotlb.h> #include "setup.h" @@ -343,11 +342,6 @@ void __init setup_arch(char **cmdline_p) ppc_md.setup_arch(); if ( ppc_md.progress ) ppc_md.progress("arch: exit", 0x3eab); -#ifdef CONFIG_SWIOTLB - if (ppc_swiotlb_enable) - swiotlb_init(1); -#endif - paging_init(); /* Initialize the MMU context management stuff */ diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c index 6568406b2a30..914389158a9b 100644 --- a/arch/powerpc/kernel/setup_64.c +++ b/arch/powerpc/kernel/setup_64.c @@ -61,7 +61,6 @@ #include <asm/xmon.h> #include <asm/udbg.h> #include <asm/kexec.h> -#include <asm/swiotlb.h> #include <asm/mmu_context.h> #include "setup.h" @@ -144,9 +143,9 @@ early_param("smt-enabled", early_smt_enabled); #endif /* CONFIG_SMP */ /* Put the paca pointer into r13 and SPRG_PACA */ -void __init setup_paca(int cpu) +static void __init setup_paca(struct paca_struct *new_paca) { - local_paca = &paca[cpu]; + local_paca = new_paca; mtspr(SPRN_SPRG_PACA, local_paca); #ifdef CONFIG_PPC_BOOK3E mtspr(SPRN_SPRG_TLB_EXFRAME, local_paca->extlb); @@ -176,14 +175,12 @@ void __init early_setup(unsigned long dt_ptr) { /* -------- printk is _NOT_ safe to use here ! ------- */ - /* Fill in any unititialised pacas */ - initialise_pacas(); - /* Identify CPU type */ identify_cpu(0, mfspr(SPRN_PVR)); /* Assume we're on cpu 0 for now. Don't write to the paca yet! */ - setup_paca(0); + initialise_paca(&boot_paca, 0); + setup_paca(&boot_paca); /* Initialize lockdep early or else spinlocks will blow */ lockdep_init(); @@ -203,7 +200,7 @@ void __init early_setup(unsigned long dt_ptr) early_init_devtree(__va(dt_ptr)); /* Now we know the logical id of our boot cpu, setup the paca. */ - setup_paca(boot_cpuid); + setup_paca(&paca[boot_cpuid]); /* Fix up paca fields required for the boot cpu */ get_paca()->cpu_start = 1; @@ -543,11 +540,6 @@ void __init setup_arch(char **cmdline_p) if (ppc_md.setup_arch) ppc_md.setup_arch(); -#ifdef CONFIG_SWIOTLB - if (ppc_swiotlb_enable) - swiotlb_init(1); -#endif - paging_init(); /* Initialize the MMU context management stuff */ diff --git a/arch/powerpc/kernel/syscalls.c b/arch/powerpc/kernel/syscalls.c index 3370e62e43d4..f2496f2faecc 100644 --- a/arch/powerpc/kernel/syscalls.c +++ b/arch/powerpc/kernel/syscalls.c @@ -42,100 +42,6 @@ #include <asm/time.h> #include <asm/unistd.h> -/* - * sys_ipc() is the de-multiplexer for the SysV IPC calls.. - * - * This is really horribly ugly. - */ -int sys_ipc(uint call, int first, unsigned long second, long third, - void __user *ptr, long fifth) -{ - int version, ret; - - version = call >> 16; /* hack for backward compatibility */ - call &= 0xffff; - - ret = -ENOSYS; - switch (call) { - case SEMOP: - ret = sys_semtimedop(first, (struct sembuf __user *)ptr, - (unsigned)second, NULL); - break; - case SEMTIMEDOP: - ret = sys_semtimedop(first, (struct sembuf __user *)ptr, - (unsigned)second, - (const struct timespec __user *) fifth); - break; - case SEMGET: - ret = sys_semget (first, (int)second, third); - break; - case SEMCTL: { - union semun fourth; - - ret = -EINVAL; - if (!ptr) - break; - if ((ret = get_user(fourth.__pad, (void __user * __user *)ptr))) - break; - ret = sys_semctl(first, (int)second, third, fourth); - break; - } - case MSGSND: - ret = sys_msgsnd(first, (struct msgbuf __user *)ptr, - (size_t)second, third); - break; - case MSGRCV: - switch (version) { - case 0: { - struct ipc_kludge tmp; - - ret = -EINVAL; - if (!ptr) - break; - if ((ret = copy_from_user(&tmp, - (struct ipc_kludge __user *) ptr, - sizeof (tmp)) ? -EFAULT : 0)) - break; - ret = sys_msgrcv(first, tmp.msgp, (size_t) second, - tmp.msgtyp, third); - break; - } - default: - ret = sys_msgrcv (first, (struct msgbuf __user *) ptr, - (size_t)second, fifth, third); - break; - } - break; - case MSGGET: - ret = sys_msgget((key_t)first, (int)second); - break; - case MSGCTL: - ret = sys_msgctl(first, (int)second, - (struct msqid_ds __user *)ptr); - break; - case SHMAT: { - ulong raddr; - ret = do_shmat(first, (char __user *)ptr, (int)second, &raddr); - if (ret) - break; - ret = put_user(raddr, (ulong __user *) third); - break; - } - case SHMDT: - ret = sys_shmdt((char __user *)ptr); - break; - case SHMGET: - ret = sys_shmget(first, (size_t)second, third); - break; - case SHMCTL: - ret = sys_shmctl(first, (int)second, - (struct shmid_ds __user *)ptr); - break; - } - - return ret; -} - static inline unsigned long do_mmap2(unsigned long addr, size_t len, unsigned long prot, unsigned long flags, unsigned long fd, unsigned long off, int shift) @@ -210,76 +116,6 @@ long ppc64_personality(unsigned long personality) } #endif -#ifdef CONFIG_PPC64 -#define OVERRIDE_MACHINE (personality(current->personality) == PER_LINUX32) -#else -#define OVERRIDE_MACHINE 0 -#endif - -static inline int override_machine(char __user *mach) -{ - if (OVERRIDE_MACHINE) { - /* change ppc64 to ppc */ - if (__put_user(0, mach+3) || __put_user(0, mach+4)) - return -EFAULT; - } - return 0; -} - -long ppc_newuname(struct new_utsname __user * name) -{ - int err = 0; - - down_read(&uts_sem); - if (copy_to_user(name, utsname(), sizeof(*name))) - err = -EFAULT; - up_read(&uts_sem); - if (!err) - err = override_machine(name->machine); - return err; -} - -int sys_uname(struct old_utsname __user *name) -{ - int err = 0; - - down_read(&uts_sem); - if (copy_to_user(name, utsname(), sizeof(*name))) - err = -EFAULT; - up_read(&uts_sem); - if (!err) - err = override_machine(name->machine); - return err; -} - -int sys_olduname(struct oldold_utsname __user *name) -{ - int error; - - if (!access_ok(VERIFY_WRITE, name, sizeof(struct oldold_utsname))) - return -EFAULT; - - down_read(&uts_sem); - error = __copy_to_user(&name->sysname, &utsname()->sysname, - __OLD_UTS_LEN); - error |= __put_user(0, name->sysname + __OLD_UTS_LEN); - error |= __copy_to_user(&name->nodename, &utsname()->nodename, - __OLD_UTS_LEN); - error |= __put_user(0, name->nodename + __OLD_UTS_LEN); - error |= __copy_to_user(&name->release, &utsname()->release, - __OLD_UTS_LEN); - error |= __put_user(0, name->release + __OLD_UTS_LEN); - error |= __copy_to_user(&name->version, &utsname()->version, - __OLD_UTS_LEN); - error |= __put_user(0, name->version + __OLD_UTS_LEN); - error |= __copy_to_user(&name->machine, &utsname()->machine, - __OLD_UTS_LEN); - error |= override_machine(name->machine); - up_read(&uts_sem); - - return error? -EFAULT: 0; -} - long ppc_fadvise64_64(int fd, int advice, u32 offset_high, u32 offset_low, u32 len_high, u32 len_low) { diff --git a/arch/powerpc/mm/init_32.c b/arch/powerpc/mm/init_32.c index 4ec900af332f..b1dbd9ee87cc 100644 --- a/arch/powerpc/mm/init_32.c +++ b/arch/powerpc/mm/init_32.c @@ -47,7 +47,7 @@ #include "mmu_decl.h" #if defined(CONFIG_KERNEL_START_BOOL) || defined(CONFIG_LOWMEM_SIZE_BOOL) -/* The ammount of lowmem must be within 0xF0000000 - KERNELBASE. */ +/* The amount of lowmem must be within 0xF0000000 - KERNELBASE. */ #if (CONFIG_LOWMEM_SIZE > (0xF0000000 - PAGE_OFFSET)) #error "You must adjust CONFIG_LOWMEM_SIZE or CONFIG_START_KERNEL" #endif diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c index 311224cdb7ad..448f972b22f5 100644 --- a/arch/powerpc/mm/mem.c +++ b/arch/powerpc/mm/mem.c @@ -48,6 +48,7 @@ #include <asm/sparsemem.h> #include <asm/vdso.h> #include <asm/fixmap.h> +#include <asm/swiotlb.h> #include "mmu_decl.h" @@ -320,6 +321,11 @@ void __init mem_init(void) struct page *page; unsigned long reservedpages = 0, codesize, initsize, datasize, bsssize; +#ifdef CONFIG_SWIOTLB + if (ppc_swiotlb_enable) + swiotlb_init(1); +#endif + num_physpages = lmb.memory.size >> PAGE_SHIFT; high_memory = (void *) __va(max_low_pfn * PAGE_SIZE); diff --git a/arch/powerpc/platforms/52xx/mpc52xx_gpt.c b/arch/powerpc/platforms/52xx/mpc52xx_gpt.c index 072b948b2e2d..5d7cc88dae6b 100644 --- a/arch/powerpc/platforms/52xx/mpc52xx_gpt.c +++ b/arch/powerpc/platforms/52xx/mpc52xx_gpt.c @@ -711,7 +711,11 @@ static int __devinit mpc52xx_gpt_wdt_init(void) return 0; } -#define mpc52xx_gpt_wdt_setup(x, y) (0) +static inline int mpc52xx_gpt_wdt_setup(struct mpc52xx_gpt_priv *gpt, + const u32 *period) +{ + return 0; +} #endif /* CONFIG_MPC5200_WDT */ diff --git a/arch/powerpc/platforms/82xx/pq2ads-pci-pic.c b/arch/powerpc/platforms/82xx/pq2ads-pci-pic.c index 9d962d7c72c1..d4a09f8705b5 100644 --- a/arch/powerpc/platforms/82xx/pq2ads-pci-pic.c +++ b/arch/powerpc/platforms/82xx/pq2ads-pci-pic.c @@ -24,7 +24,7 @@ #include "pq2.h" -static DEFINE_SPINLOCK(pci_pic_lock); +static DEFINE_RAW_SPINLOCK(pci_pic_lock); struct pq2ads_pci_pic { struct device_node *node; @@ -45,12 +45,12 @@ static void pq2ads_pci_mask_irq(unsigned int virq) if (irq != -1) { unsigned long flags; - spin_lock_irqsave(&pci_pic_lock, flags); + raw_spin_lock_irqsave(&pci_pic_lock, flags); setbits32(&priv->regs->mask, 1 << irq); mb(); - spin_unlock_irqrestore(&pci_pic_lock, flags); + raw_spin_unlock_irqrestore(&pci_pic_lock, flags); } } @@ -62,9 +62,9 @@ static void pq2ads_pci_unmask_irq(unsigned int virq) if (irq != -1) { unsigned long flags; - spin_lock_irqsave(&pci_pic_lock, flags); + raw_spin_lock_irqsave(&pci_pic_lock, flags); clrbits32(&priv->regs->mask, 1 << irq); - spin_unlock_irqrestore(&pci_pic_lock, flags); + raw_spin_unlock_irqrestore(&pci_pic_lock, flags); } } diff --git a/arch/powerpc/platforms/85xx/socrates_fpga_pic.c b/arch/powerpc/platforms/85xx/socrates_fpga_pic.c index 42e87f08aa01..d48527ffc425 100644 --- a/arch/powerpc/platforms/85xx/socrates_fpga_pic.c +++ b/arch/powerpc/platforms/85xx/socrates_fpga_pic.c @@ -50,7 +50,7 @@ static struct socrates_fpga_irq_info fpga_irqs[SOCRATES_FPGA_NUM_IRQS] = { #define socrates_fpga_irq_to_hw(virq) ((unsigned int)irq_map[virq].hwirq) -static DEFINE_SPINLOCK(socrates_fpga_pic_lock); +static DEFINE_RAW_SPINLOCK(socrates_fpga_pic_lock); static void __iomem *socrates_fpga_pic_iobase; static struct irq_host *socrates_fpga_pic_irq_host; @@ -80,9 +80,9 @@ static inline unsigned int socrates_fpga_pic_get_irq(unsigned int irq) if (i == 3) return NO_IRQ; - spin_lock_irqsave(&socrates_fpga_pic_lock, flags); + raw_spin_lock_irqsave(&socrates_fpga_pic_lock, flags); cause = socrates_fpga_pic_read(FPGA_PIC_IRQMASK(i)); - spin_unlock_irqrestore(&socrates_fpga_pic_lock, flags); + raw_spin_unlock_irqrestore(&socrates_fpga_pic_lock, flags); for (i = SOCRATES_FPGA_NUM_IRQS - 1; i >= 0; i--) { if (cause >> (i + 16)) break; @@ -116,12 +116,12 @@ static void socrates_fpga_pic_ack(unsigned int virq) hwirq = socrates_fpga_irq_to_hw(virq); irq_line = fpga_irqs[hwirq].irq_line; - spin_lock_irqsave(&socrates_fpga_pic_lock, flags); + raw_spin_lock_irqsave(&socrates_fpga_pic_lock, flags); mask = socrates_fpga_pic_read(FPGA_PIC_IRQMASK(irq_line)) & SOCRATES_FPGA_IRQ_MASK; mask |= (1 << (hwirq + 16)); socrates_fpga_pic_write(FPGA_PIC_IRQMASK(irq_line), mask); - spin_unlock_irqrestore(&socrates_fpga_pic_lock, flags); + raw_spin_unlock_irqrestore(&socrates_fpga_pic_lock, flags); } static void socrates_fpga_pic_mask(unsigned int virq) @@ -134,12 +134,12 @@ static void socrates_fpga_pic_mask(unsigned int virq) hwirq = socrates_fpga_irq_to_hw(virq); irq_line = fpga_irqs[hwirq].irq_line; - spin_lock_irqsave(&socrates_fpga_pic_lock, flags); + raw_spin_lock_irqsave(&socrates_fpga_pic_lock, flags); mask = socrates_fpga_pic_read(FPGA_PIC_IRQMASK(irq_line)) & SOCRATES_FPGA_IRQ_MASK; mask &= ~(1 << hwirq); socrates_fpga_pic_write(FPGA_PIC_IRQMASK(irq_line), mask); - spin_unlock_irqrestore(&socrates_fpga_pic_lock, flags); + raw_spin_unlock_irqrestore(&socrates_fpga_pic_lock, flags); } static void socrates_fpga_pic_mask_ack(unsigned int virq) @@ -152,13 +152,13 @@ static void socrates_fpga_pic_mask_ack(unsigned int virq) hwirq = socrates_fpga_irq_to_hw(virq); irq_line = fpga_irqs[hwirq].irq_line; - spin_lock_irqsave(&socrates_fpga_pic_lock, flags); + raw_spin_lock_irqsave(&socrates_fpga_pic_lock, flags); mask = socrates_fpga_pic_read(FPGA_PIC_IRQMASK(irq_line)) & SOCRATES_FPGA_IRQ_MASK; mask &= ~(1 << hwirq); mask |= (1 << (hwirq + 16)); socrates_fpga_pic_write(FPGA_PIC_IRQMASK(irq_line), mask); - spin_unlock_irqrestore(&socrates_fpga_pic_lock, flags); + raw_spin_unlock_irqrestore(&socrates_fpga_pic_lock, flags); } static void socrates_fpga_pic_unmask(unsigned int virq) @@ -171,12 +171,12 @@ static void socrates_fpga_pic_unmask(unsigned int virq) hwirq = socrates_fpga_irq_to_hw(virq); irq_line = fpga_irqs[hwirq].irq_line; - spin_lock_irqsave(&socrates_fpga_pic_lock, flags); + raw_spin_lock_irqsave(&socrates_fpga_pic_lock, flags); mask = socrates_fpga_pic_read(FPGA_PIC_IRQMASK(irq_line)) & SOCRATES_FPGA_IRQ_MASK; mask |= (1 << hwirq); socrates_fpga_pic_write(FPGA_PIC_IRQMASK(irq_line), mask); - spin_unlock_irqrestore(&socrates_fpga_pic_lock, flags); + raw_spin_unlock_irqrestore(&socrates_fpga_pic_lock, flags); } static void socrates_fpga_pic_eoi(unsigned int virq) @@ -189,12 +189,12 @@ static void socrates_fpga_pic_eoi(unsigned int virq) hwirq = socrates_fpga_irq_to_hw(virq); irq_line = fpga_irqs[hwirq].irq_line; - spin_lock_irqsave(&socrates_fpga_pic_lock, flags); + raw_spin_lock_irqsave(&socrates_fpga_pic_lock, flags); mask = socrates_fpga_pic_read(FPGA_PIC_IRQMASK(irq_line)) & SOCRATES_FPGA_IRQ_MASK; mask |= (1 << (hwirq + 16)); socrates_fpga_pic_write(FPGA_PIC_IRQMASK(irq_line), mask); - spin_unlock_irqrestore(&socrates_fpga_pic_lock, flags); + raw_spin_unlock_irqrestore(&socrates_fpga_pic_lock, flags); } static int socrates_fpga_pic_set_type(unsigned int virq, @@ -220,14 +220,14 @@ static int socrates_fpga_pic_set_type(unsigned int virq, default: return -EINVAL; } - spin_lock_irqsave(&socrates_fpga_pic_lock, flags); + raw_spin_lock_irqsave(&socrates_fpga_pic_lock, flags); mask = socrates_fpga_pic_read(FPGA_PIC_IRQCFG); if (polarity) mask |= (1 << hwirq); else mask &= ~(1 << hwirq); socrates_fpga_pic_write(FPGA_PIC_IRQCFG, mask); - spin_unlock_irqrestore(&socrates_fpga_pic_lock, flags); + raw_spin_unlock_irqrestore(&socrates_fpga_pic_lock, flags); return 0; } @@ -314,14 +314,14 @@ void socrates_fpga_pic_init(struct device_node *pic) socrates_fpga_pic_iobase = of_iomap(pic, 0); - spin_lock_irqsave(&socrates_fpga_pic_lock, flags); + raw_spin_lock_irqsave(&socrates_fpga_pic_lock, flags); socrates_fpga_pic_write(FPGA_PIC_IRQMASK(0), SOCRATES_FPGA_IRQ_MASK << 16); socrates_fpga_pic_write(FPGA_PIC_IRQMASK(1), SOCRATES_FPGA_IRQ_MASK << 16); socrates_fpga_pic_write(FPGA_PIC_IRQMASK(2), SOCRATES_FPGA_IRQ_MASK << 16); - spin_unlock_irqrestore(&socrates_fpga_pic_lock, flags); + raw_spin_unlock_irqrestore(&socrates_fpga_pic_lock, flags); pr_info("FPGA PIC: Setting up Socrates FPGA PIC\n"); } diff --git a/arch/powerpc/platforms/86xx/Kconfig b/arch/powerpc/platforms/86xx/Kconfig index 2bbfd530d6d8..fbe9f3621424 100644 --- a/arch/powerpc/platforms/86xx/Kconfig +++ b/arch/powerpc/platforms/86xx/Kconfig @@ -33,32 +33,32 @@ config MPC8610_HPCD This option enables support for the MPC8610 HPCD board. config GEF_PPC9A - bool "GE Fanuc PPC9A" + bool "GE PPC9A" select DEFAULT_UIMAGE select MMIO_NVRAM select GENERIC_GPIO select ARCH_REQUIRE_GPIOLIB help - This option enables support for GE Fanuc's PPC9A. + This option enables support for the GE PPC9A. config GEF_SBC310 - bool "GE Fanuc SBC310" + bool "GE SBC310" select DEFAULT_UIMAGE select MMIO_NVRAM select GENERIC_GPIO select ARCH_REQUIRE_GPIOLIB help - This option enables support for GE Fanuc's SBC310. + This option enables support for the GE SBC310. config GEF_SBC610 - bool "GE Fanuc SBC610" + bool "GE SBC610" select DEFAULT_UIMAGE select MMIO_NVRAM select GENERIC_GPIO select ARCH_REQUIRE_GPIOLIB select HAS_RAPIDIO help - This option enables support for GE Fanuc's SBC610. + This option enables support for the GE SBC610. endif diff --git a/arch/powerpc/platforms/86xx/gef_gpio.c b/arch/powerpc/platforms/86xx/gef_gpio.c index b2ea8875adba..11f7b2b6f49e 100644 --- a/arch/powerpc/platforms/86xx/gef_gpio.c +++ b/arch/powerpc/platforms/86xx/gef_gpio.c @@ -1,9 +1,9 @@ /* - * Driver for GE Fanuc's FPGA based GPIO pins + * Driver for GE FPGA based GPIO * - * Author: Martyn Welch <martyn.welch@gefanuc.com> + * Author: Martyn Welch <martyn.welch@ge.com> * - * 2008 (c) GE Fanuc Intelligent Platforms Embedded Systems, Inc. + * 2008 (c) GE Intelligent Platforms Embedded Systems, Inc. * * This file is licensed under the terms of the GNU General Public License * version 2. This program is licensed "as is" without any warranty of any @@ -164,6 +164,6 @@ static int __init gef_gpio_init(void) }; arch_initcall(gef_gpio_init); -MODULE_DESCRIPTION("GE Fanuc I/O FPGA GPIO driver"); -MODULE_AUTHOR("Martyn Welch <martyn.welch@gefanuc.com"); +MODULE_DESCRIPTION("GE I/O FPGA GPIO driver"); +MODULE_AUTHOR("Martyn Welch <martyn.welch@ge.com"); MODULE_LICENSE("GPL"); diff --git a/arch/powerpc/platforms/86xx/gef_pic.c b/arch/powerpc/platforms/86xx/gef_pic.c index 0110a8736d33..6df9e2561c06 100644 --- a/arch/powerpc/platforms/86xx/gef_pic.c +++ b/arch/powerpc/platforms/86xx/gef_pic.c @@ -1,9 +1,9 @@ /* - * Interrupt handling for GE Fanuc's FPGA based PIC + * Interrupt handling for GE FPGA based PIC * - * Author: Martyn Welch <martyn.welch@gefanuc.com> + * Author: Martyn Welch <martyn.welch@ge.com> * - * 2008 (c) GE Fanuc Intelligent Platforms Embedded Systems, Inc. + * 2008 (c) GE Intelligent Platforms Embedded Systems, Inc. * * This file is licensed under the terms of the GNU General Public License * version 2. This program is licensed "as is" without any warranty of any @@ -49,7 +49,7 @@ #define gef_irq_to_hw(virq) ((unsigned int)irq_map[virq].hwirq) -static DEFINE_SPINLOCK(gef_pic_lock); +static DEFINE_RAW_SPINLOCK(gef_pic_lock); static void __iomem *gef_pic_irq_reg_base; static struct irq_host *gef_pic_irq_host; @@ -118,11 +118,11 @@ static void gef_pic_mask(unsigned int virq) hwirq = gef_irq_to_hw(virq); - spin_lock_irqsave(&gef_pic_lock, flags); + raw_spin_lock_irqsave(&gef_pic_lock, flags); mask = in_be32(gef_pic_irq_reg_base + GEF_PIC_INTR_MASK(0)); mask &= ~(1 << hwirq); out_be32(gef_pic_irq_reg_base + GEF_PIC_INTR_MASK(0), mask); - spin_unlock_irqrestore(&gef_pic_lock, flags); + raw_spin_unlock_irqrestore(&gef_pic_lock, flags); } static void gef_pic_mask_ack(unsigned int virq) @@ -141,11 +141,11 @@ static void gef_pic_unmask(unsigned int virq) hwirq = gef_irq_to_hw(virq); - spin_lock_irqsave(&gef_pic_lock, flags); + raw_spin_lock_irqsave(&gef_pic_lock, flags); mask = in_be32(gef_pic_irq_reg_base + GEF_PIC_INTR_MASK(0)); mask |= (1 << hwirq); out_be32(gef_pic_irq_reg_base + GEF_PIC_INTR_MASK(0), mask); - spin_unlock_irqrestore(&gef_pic_lock, flags); + raw_spin_unlock_irqrestore(&gef_pic_lock, flags); } static struct irq_chip gef_pic_chip = { @@ -199,7 +199,7 @@ void __init gef_pic_init(struct device_node *np) /* Map the devices registers into memory */ gef_pic_irq_reg_base = of_iomap(np, 0); - spin_lock_irqsave(&gef_pic_lock, flags); + raw_spin_lock_irqsave(&gef_pic_lock, flags); /* Initialise everything as masked. */ out_be32(gef_pic_irq_reg_base + GEF_PIC_CPU0_INTR_MASK, 0); @@ -208,7 +208,7 @@ void __init gef_pic_init(struct device_node *np) out_be32(gef_pic_irq_reg_base + GEF_PIC_CPU0_MCP_MASK, 0); out_be32(gef_pic_irq_reg_base + GEF_PIC_CPU1_MCP_MASK, 0); - spin_unlock_irqrestore(&gef_pic_lock, flags); + raw_spin_unlock_irqrestore(&gef_pic_lock, flags); /* Map controller */ gef_pic_cascade_irq = irq_of_parse_and_map(np, 0); diff --git a/arch/powerpc/platforms/86xx/gef_ppc9a.c b/arch/powerpc/platforms/86xx/gef_ppc9a.c index a792e5d85813..60ce07e39100 100644 --- a/arch/powerpc/platforms/86xx/gef_ppc9a.c +++ b/arch/powerpc/platforms/86xx/gef_ppc9a.c @@ -1,9 +1,9 @@ /* - * GE Fanuc PPC9A board support + * GE PPC9A board support * - * Author: Martyn Welch <martyn.welch@gefanuc.com> + * Author: Martyn Welch <martyn.welch@ge.com> * - * Copyright 2008 GE Fanuc Intelligent Platforms Embedded Systems, Inc. + * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -82,7 +82,7 @@ static void __init gef_ppc9a_setup_arch(void) } #endif - printk(KERN_INFO "GE Fanuc Intelligent Platforms PPC9A 6U VME SBC\n"); + printk(KERN_INFO "GE Intelligent Platforms PPC9A 6U VME SBC\n"); #ifdef CONFIG_SMP mpc86xx_smp_init(); @@ -151,7 +151,7 @@ static void gef_ppc9a_show_cpuinfo(struct seq_file *m) { uint svid = mfspr(SPRN_SVR); - seq_printf(m, "Vendor\t\t: GE Fanuc Intelligent Platforms\n"); + seq_printf(m, "Vendor\t\t: GE Intelligent Platforms\n"); seq_printf(m, "Revision\t: %u%c\n", gef_ppc9a_get_pcb_rev(), ('A' + gef_ppc9a_get_board_rev())); @@ -235,7 +235,7 @@ static int __init declare_of_platform_devices(void) machine_device_initcall(gef_ppc9a, declare_of_platform_devices); define_machine(gef_ppc9a) { - .name = "GE Fanuc PPC9A", + .name = "GE PPC9A", .probe = gef_ppc9a_probe, .setup_arch = gef_ppc9a_setup_arch, .init_IRQ = gef_ppc9a_init_irq, diff --git a/arch/powerpc/platforms/86xx/gef_sbc310.c b/arch/powerpc/platforms/86xx/gef_sbc310.c index 6a1a613836c2..3ecee25bf3ed 100644 --- a/arch/powerpc/platforms/86xx/gef_sbc310.c +++ b/arch/powerpc/platforms/86xx/gef_sbc310.c @@ -1,9 +1,9 @@ /* - * GE Fanuc SBC310 board support + * GE SBC310 board support * - * Author: Martyn Welch <martyn.welch@gefanuc.com> + * Author: Martyn Welch <martyn.welch@ge.com> * - * Copyright 2008 GE Fanuc Intelligent Platforms Embedded Systems, Inc. + * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -82,7 +82,7 @@ static void __init gef_sbc310_setup_arch(void) } #endif - printk(KERN_INFO "GE Fanuc Intelligent Platforms SBC310 6U VPX SBC\n"); + printk(KERN_INFO "GE Intelligent Platforms SBC310 6U VPX SBC\n"); #ifdef CONFIG_SMP mpc86xx_smp_init(); @@ -142,7 +142,7 @@ static void gef_sbc310_show_cpuinfo(struct seq_file *m) { uint svid = mfspr(SPRN_SVR); - seq_printf(m, "Vendor\t\t: GE Fanuc Intelligent Platforms\n"); + seq_printf(m, "Vendor\t\t: GE Intelligent Platforms\n"); seq_printf(m, "Board ID\t: 0x%2.2x\n", gef_sbc310_get_board_id()); seq_printf(m, "Revision\t: %u%c\n", gef_sbc310_get_pcb_rev(), @@ -223,7 +223,7 @@ static int __init declare_of_platform_devices(void) machine_device_initcall(gef_sbc310, declare_of_platform_devices); define_machine(gef_sbc310) { - .name = "GE Fanuc SBC310", + .name = "GE SBC310", .probe = gef_sbc310_probe, .setup_arch = gef_sbc310_setup_arch, .init_IRQ = gef_sbc310_init_irq, diff --git a/arch/powerpc/platforms/86xx/gef_sbc610.c b/arch/powerpc/platforms/86xx/gef_sbc610.c index e10688a0fc4e..5090d608d9ee 100644 --- a/arch/powerpc/platforms/86xx/gef_sbc610.c +++ b/arch/powerpc/platforms/86xx/gef_sbc610.c @@ -1,9 +1,9 @@ /* - * GE Fanuc SBC610 board support + * GE SBC610 board support * - * Author: Martyn Welch <martyn.welch@gefanuc.com> + * Author: Martyn Welch <martyn.welch@ge.com> * - * Copyright 2008 GE Fanuc Intelligent Platforms Embedded Systems, Inc. + * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -82,7 +82,7 @@ static void __init gef_sbc610_setup_arch(void) } #endif - printk(KERN_INFO "GE Fanuc Intelligent Platforms SBC610 6U VPX SBC\n"); + printk(KERN_INFO "GE Intelligent Platforms SBC610 6U VPX SBC\n"); #ifdef CONFIG_SMP mpc86xx_smp_init(); @@ -133,7 +133,7 @@ static void gef_sbc610_show_cpuinfo(struct seq_file *m) { uint svid = mfspr(SPRN_SVR); - seq_printf(m, "Vendor\t\t: GE Fanuc Intelligent Platforms\n"); + seq_printf(m, "Vendor\t\t: GE Intelligent Platforms\n"); seq_printf(m, "Revision\t: %u%c\n", gef_sbc610_get_pcb_rev(), ('A' + gef_sbc610_get_board_rev() - 1)); @@ -212,7 +212,7 @@ static int __init declare_of_platform_devices(void) machine_device_initcall(gef_sbc610, declare_of_platform_devices); define_machine(gef_sbc610) { - .name = "GE Fanuc SBC610", + .name = "GE SBC610", .probe = gef_sbc610_probe, .setup_arch = gef_sbc610_setup_arch, .init_IRQ = gef_sbc610_init_irq, diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype index fa0f690d3867..a8aae0b54579 100644 --- a/arch/powerpc/platforms/Kconfig.cputype +++ b/arch/powerpc/platforms/Kconfig.cputype @@ -144,6 +144,16 @@ config FSL_EMB_PERFMON and some e300 cores (c3 and c4). Select this only if your core supports the Embedded Performance Monitor APU +config FSL_EMB_PERF_EVENT + bool + depends on FSL_EMB_PERFMON && PERF_EVENTS && !PPC_PERF_CTRS + default y + +config FSL_EMB_PERF_EVENT_E500 + bool + depends on FSL_EMB_PERF_EVENT && E500 + default y + config 4xx bool depends on 40x || 44x diff --git a/arch/powerpc/platforms/iseries/exception.S b/arch/powerpc/platforms/iseries/exception.S index 5369653dcf6a..fba5bf915073 100644 --- a/arch/powerpc/platforms/iseries/exception.S +++ b/arch/powerpc/platforms/iseries/exception.S @@ -43,17 +43,14 @@ system_reset_iSeries: LOAD_REG_ADDR(r23, alpaca) li r0,ALPACA_SIZE sub r23,r13,r23 - divdu r23,r23,r0 /* r23 has cpu number */ - LOAD_REG_ADDR(r13, paca) - mulli r0,r23,PACA_SIZE - add r13,r13,r0 - mtspr SPRN_SPRG_PACA,r13 /* Save it away for the future */ - mfmsr r24 - ori r24,r24,MSR_RI - mtmsrd r24 /* RI on */ - mr r24,r23 + divdu r24,r23,r0 /* r24 has cpu number */ cmpwi 0,r24,0 /* Are we processor 0? */ bne 1f + LOAD_REG_ADDR(r13, boot_paca) + mtspr SPRN_SPRG_PACA,r13 /* Save it away for the future */ + mfmsr r23 + ori r23,r23,MSR_RI + mtmsrd r23 /* RI on */ b .__start_initialization_iSeries /* Start up the first processor */ 1: mfspr r4,SPRN_CTRLF li r5,CTRL_RUNLATCH /* Turn off the run light */ @@ -86,6 +83,16 @@ system_reset_iSeries: #endif 2: + /* Load our paca now that it's been allocated */ + LOAD_REG_ADDR(r13, paca) + ld r13,0(r13) + mulli r0,r24,PACA_SIZE + add r13,r13,r0 + mtspr SPRN_SPRG_PACA,r13 /* Save it away for the future */ + mfmsr r23 + ori r23,r23,MSR_RI + mtmsrd r23 /* RI on */ + HMT_LOW #ifdef CONFIG_SMP lbz r23,PACAPROCSTART(r13) /* Test if this processor diff --git a/arch/powerpc/platforms/pseries/hotplug-cpu.c b/arch/powerpc/platforms/pseries/hotplug-cpu.c index d1b124e44d77..a8e1d5d17a28 100644 --- a/arch/powerpc/platforms/pseries/hotplug-cpu.c +++ b/arch/powerpc/platforms/pseries/hotplug-cpu.c @@ -122,44 +122,32 @@ static void pseries_mach_cpu_die(void) if (!get_lppaca()->shared_proc) get_lppaca()->donate_dedicated_cpu = 1; - printk(KERN_INFO - "cpu %u (hwid %u) ceding for offline with hint %d\n", - cpu, hwcpu, cede_latency_hint); while (get_preferred_offline_state(cpu) == CPU_STATE_INACTIVE) { extended_cede_processor(cede_latency_hint); - printk(KERN_INFO "cpu %u (hwid %u) returned from cede.\n", - cpu, hwcpu); - printk(KERN_INFO - "Decrementer value = %x Timebase value = %llx\n", - get_dec(), get_tb()); } - printk(KERN_INFO "cpu %u (hwid %u) got prodded to go online\n", - cpu, hwcpu); - if (!get_lppaca()->shared_proc) get_lppaca()->donate_dedicated_cpu = 0; get_lppaca()->idle = 0; - } - if (get_preferred_offline_state(cpu) == CPU_STATE_ONLINE) { - unregister_slb_shadow(hwcpu, __pa(get_slb_shadow())); + if (get_preferred_offline_state(cpu) == CPU_STATE_ONLINE) { + unregister_slb_shadow(hwcpu, __pa(get_slb_shadow())); - /* - * NOTE: Calling start_secondary() here for now to - * start new context. - * However, need to do it cleanly by resetting the - * stack pointer. - */ - start_secondary(); + /* + * Call to start_secondary_resume() will not return. + * Kernel stack will be reset and start_secondary() + * will be called to continue the online operation. + */ + start_secondary_resume(); + } + } - } else if (get_preferred_offline_state(cpu) == CPU_STATE_OFFLINE) { + /* Requested state is CPU_STATE_OFFLINE at this point */ + WARN_ON(get_preferred_offline_state(cpu) != CPU_STATE_OFFLINE); - set_cpu_current_state(cpu, CPU_STATE_OFFLINE); - unregister_slb_shadow(hard_smp_processor_id(), - __pa(get_slb_shadow())); - rtas_stop_self(); - } + set_cpu_current_state(cpu, CPU_STATE_OFFLINE); + unregister_slb_shadow(hwcpu, __pa(get_slb_shadow())); + rtas_stop_self(); /* Should never get here... */ BUG(); diff --git a/arch/powerpc/platforms/pseries/offline_states.h b/arch/powerpc/platforms/pseries/offline_states.h index 22574e0d9d91..75a6f480d931 100644 --- a/arch/powerpc/platforms/pseries/offline_states.h +++ b/arch/powerpc/platforms/pseries/offline_states.h @@ -9,10 +9,31 @@ enum cpu_state_vals { CPU_MAX_OFFLINE_STATES }; +#ifdef CONFIG_HOTPLUG_CPU extern enum cpu_state_vals get_cpu_current_state(int cpu); extern void set_cpu_current_state(int cpu, enum cpu_state_vals state); -extern enum cpu_state_vals get_preferred_offline_state(int cpu); extern void set_preferred_offline_state(int cpu, enum cpu_state_vals state); extern void set_default_offline_state(int cpu); +#else +static inline enum cpu_state_vals get_cpu_current_state(int cpu) +{ + return CPU_STATE_ONLINE; +} + +static inline void set_cpu_current_state(int cpu, enum cpu_state_vals state) +{ +} + +static inline void set_preferred_offline_state(int cpu, enum cpu_state_vals state) +{ +} + +static inline void set_default_offline_state(int cpu) +{ +} +#endif + +extern enum cpu_state_vals get_preferred_offline_state(int cpu); extern int start_secondary(void); +extern void start_secondary_resume(void); #endif diff --git a/arch/powerpc/platforms/pseries/plpar_wrappers.h b/arch/powerpc/platforms/pseries/plpar_wrappers.h index 0603c91538ae..a05f8d427856 100644 --- a/arch/powerpc/platforms/pseries/plpar_wrappers.h +++ b/arch/powerpc/platforms/pseries/plpar_wrappers.h @@ -259,12 +259,12 @@ static inline long plpar_ipi(unsigned long servernum, unsigned long mfrr) return plpar_hcall_norets(H_IPI, servernum, mfrr); } -static inline long plpar_xirr(unsigned long *xirr_ret) +static inline long plpar_xirr(unsigned long *xirr_ret, unsigned char cppr) { long rc; unsigned long retbuf[PLPAR_HCALL_BUFSIZE]; - rc = plpar_hcall(H_XIRR, retbuf); + rc = plpar_hcall(H_XIRR, retbuf, cppr); *xirr_ret = retbuf[0]; diff --git a/arch/powerpc/platforms/pseries/xics.c b/arch/powerpc/platforms/pseries/xics.c index 4ca641042ec3..1bcedd8b4616 100644 --- a/arch/powerpc/platforms/pseries/xics.c +++ b/arch/powerpc/platforms/pseries/xics.c @@ -120,12 +120,12 @@ static inline void direct_qirr_info(int n_cpu, u8 value) /* LPAR low level accessors */ -static inline unsigned int lpar_xirr_info_get(void) +static inline unsigned int lpar_xirr_info_get(unsigned char cppr) { unsigned long lpar_rc; unsigned long return_value; - lpar_rc = plpar_xirr(&return_value); + lpar_rc = plpar_xirr(&return_value, cppr); if (lpar_rc != H_SUCCESS) panic(" bad return code xirr - rc = %lx\n", lpar_rc); return (unsigned int)return_value; @@ -331,7 +331,8 @@ static unsigned int xics_get_irq_direct(void) static unsigned int xics_get_irq_lpar(void) { - unsigned int xirr = lpar_xirr_info_get(); + struct xics_cppr *os_cppr = &__get_cpu_var(xics_cppr); + unsigned int xirr = lpar_xirr_info_get(os_cppr->stack[os_cppr->index]); unsigned int vec = xics_xirr_vector(xirr); unsigned int irq; diff --git a/arch/powerpc/sysdev/cpm2_pic.h b/arch/powerpc/sysdev/cpm2_pic.h index 30e5828a2781..2c5f70c24485 100644 --- a/arch/powerpc/sysdev/cpm2_pic.h +++ b/arch/powerpc/sysdev/cpm2_pic.h @@ -3,6 +3,6 @@ extern unsigned int cpm2_get_irq(void); -extern void cpm2_pic_init(struct device_node*); +extern void cpm2_pic_init(struct device_node *); #endif /* _PPC_KERNEL_CPM2_H */ diff --git a/arch/powerpc/sysdev/qe_lib/qe_ic.c b/arch/powerpc/sysdev/qe_lib/qe_ic.c index d927da893ec4..541ba9863647 100644 --- a/arch/powerpc/sysdev/qe_lib/qe_ic.c +++ b/arch/powerpc/sysdev/qe_lib/qe_ic.c @@ -33,7 +33,7 @@ #include "qe_ic.h" -static DEFINE_SPINLOCK(qe_ic_lock); +static DEFINE_RAW_SPINLOCK(qe_ic_lock); static struct qe_ic_info qe_ic_info[] = { [1] = { @@ -201,13 +201,13 @@ static void qe_ic_unmask_irq(unsigned int virq) unsigned long flags; u32 temp; - spin_lock_irqsave(&qe_ic_lock, flags); + raw_spin_lock_irqsave(&qe_ic_lock, flags); temp = qe_ic_read(qe_ic->regs, qe_ic_info[src].mask_reg); qe_ic_write(qe_ic->regs, qe_ic_info[src].mask_reg, temp | qe_ic_info[src].mask); - spin_unlock_irqrestore(&qe_ic_lock, flags); + raw_spin_unlock_irqrestore(&qe_ic_lock, flags); } static void qe_ic_mask_irq(unsigned int virq) @@ -217,7 +217,7 @@ static void qe_ic_mask_irq(unsigned int virq) unsigned long flags; u32 temp; - spin_lock_irqsave(&qe_ic_lock, flags); + raw_spin_lock_irqsave(&qe_ic_lock, flags); temp = qe_ic_read(qe_ic->regs, qe_ic_info[src].mask_reg); qe_ic_write(qe_ic->regs, qe_ic_info[src].mask_reg, @@ -233,7 +233,7 @@ static void qe_ic_mask_irq(unsigned int virq) */ mb(); - spin_unlock_irqrestore(&qe_ic_lock, flags); + raw_spin_unlock_irqrestore(&qe_ic_lock, flags); } static struct irq_chip qe_ic_irq_chip = { |
