diff options
Diffstat (limited to 'arch/powerpc')
| -rw-r--r-- | arch/powerpc/boot/Makefile | 2 | ||||
| -rw-r--r-- | arch/powerpc/kernel/kprobes.c | 2 | ||||
| -rw-r--r-- | arch/powerpc/oprofile/cell/spu_profiler.c | 2 |
3 files changed, 3 insertions, 3 deletions
diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile index f32829937aad..ab6dda372438 100644 --- a/arch/powerpc/boot/Makefile +++ b/arch/powerpc/boot/Makefile @@ -208,7 +208,7 @@ image-$(CONFIG_DEFAULT_UIMAGE) += uImage # # Theses are default targets to build images which embed device tree blobs. # They are only required on boards which do not have FDT support in firmware. -# Boards with newish u-boot firmare can use the uImage target above +# Boards with newish u-boot firmware can use the uImage target above # # Board ports in arch/powerpc/platform/40x/Kconfig diff --git a/arch/powerpc/kernel/kprobes.c b/arch/powerpc/kernel/kprobes.c index 989edcdf0297..c9329786073b 100644 --- a/arch/powerpc/kernel/kprobes.c +++ b/arch/powerpc/kernel/kprobes.c @@ -317,7 +317,7 @@ static int __kprobes trampoline_probe_handler(struct kprobe *p, /* * It is possible to have multiple instances associated with a given * task either because an multiple functions in the call path - * have a return probe installed on them, and/or more then one return + * have a return probe installed on them, and/or more than one return * return probe was registered for a target function. * * We can handle this because: diff --git a/arch/powerpc/oprofile/cell/spu_profiler.c b/arch/powerpc/oprofile/cell/spu_profiler.c index dd499c3e9da7..83faa958b9d4 100644 --- a/arch/powerpc/oprofile/cell/spu_profiler.c +++ b/arch/powerpc/oprofile/cell/spu_profiler.c @@ -49,7 +49,7 @@ void set_spu_profiling_frequency(unsigned int freq_khz, unsigned int cycles_rese * of precision. This is close enough for the purpose at hand. * * The value of the timeout should be small enough that the hw - * trace buffer will not get more then about 1/3 full for the + * trace buffer will not get more than about 1/3 full for the * maximum user specified (the LFSR value) hw sampling frequency. * This is to ensure the trace buffer will never fill even if the * kernel thread scheduling varies under a heavy system load. |
