summaryrefslogtreecommitdiffstats
path: root/arch/powerpc
diff options
context:
space:
mode:
Diffstat (limited to 'arch/powerpc')
-rw-r--r--arch/powerpc/boot/dts/mpc8544ds.dts88
-rw-r--r--arch/powerpc/boot/dts/mpc8641_hpcn.dts114
-rw-r--r--arch/powerpc/configs/cell_defconfig220
-rw-r--r--arch/powerpc/kernel/traps.c4
-rw-r--r--arch/powerpc/mm/slb.c36
-rw-r--r--arch/powerpc/platforms/85xx/Kconfig1
-rw-r--r--arch/powerpc/platforms/85xx/mpc8544_ds.c214
-rw-r--r--arch/powerpc/platforms/86xx/Kconfig1
-rw-r--r--arch/powerpc/platforms/86xx/mpc86xx_hpcn.c224
-rw-r--r--arch/powerpc/platforms/Kconfig8
-rw-r--r--arch/powerpc/platforms/Makefile3
-rw-r--r--arch/powerpc/platforms/cell/cbe_regs.h8
-rw-r--r--arch/powerpc/platforms/cell/cbe_thermal.c6
-rw-r--r--arch/powerpc/platforms/cell/pervasive.c26
-rw-r--r--arch/powerpc/platforms/cell/spu_manage.c2
-rw-r--r--arch/powerpc/platforms/fsl_uli1575.c255
-rw-r--r--arch/powerpc/platforms/pasemi/iommu.c6
-rw-r--r--arch/powerpc/sysdev/axonram.c46
-rw-r--r--arch/powerpc/sysdev/fsl_pci.c2
-rw-r--r--arch/powerpc/sysdev/fsl_soc.c1
-rw-r--r--arch/powerpc/sysdev/rtc_cmos_setup.c17
21 files changed, 532 insertions, 750 deletions
diff --git a/arch/powerpc/boot/dts/mpc8544ds.dts b/arch/powerpc/boot/dts/mpc8544ds.dts
index 4680e2010887..3e79bf0a3159 100644
--- a/arch/powerpc/boot/dts/mpc8544ds.dts
+++ b/arch/powerpc/boot/dts/mpc8544ds.dts
@@ -44,8 +44,18 @@
#size-cells = <1>;
#interrupt-cells = <2>;
device_type = "soc";
- ranges = <0 e0000000 00100000>;
- reg = <e0000000 00100000>; // CCSRBAR 1M
+
+
+ ranges = <00001000 e0001000 000ff000
+ 80000000 80000000 20000000
+ a0000000 a0000000 10000000
+ b0000000 b0000000 00100000
+ c0000000 c0000000 20000000
+ b0100000 b0100000 00100000
+ e1000000 e1000000 00010000
+ e1010000 e1010000 00010000
+ e1020000 e1020000 00010000>;
+ reg = <e0000000 00001000>; // CCSRBAR 1M
bus-frequency = <0>; // Filled out by uboot.
memory-controller@2000 {
@@ -161,8 +171,8 @@
interrupt-parent = <&mpic>;
interrupts = <18 2>;
bus-range = <0 ff>;
- ranges = <02000000 0 80000000 80000000 0 10000000
- 01000000 0 00000000 e2000000 0 00800000>;
+ ranges = <02000000 0 c0000000 c0000000 0 20000000
+ 01000000 0 00000000 e1000000 0 00010000>;
clock-frequency = <3f940aa>;
#interrupt-cells = <1>;
#size-cells = <2>;
@@ -178,8 +188,8 @@
#address-cells = <3>;
reg = <9000 1000>;
bus-range = <0 ff>;
- ranges = <02000000 0 90000000 90000000 0 10000000
- 01000000 0 00000000 e3000000 0 00800000>;
+ ranges = <02000000 0 80000000 80000000 0 20000000
+ 01000000 0 00000000 e1010000 0 00010000>;
clock-frequency = <1fca055>;
interrupt-parent = <&mpic>;
interrupts = <1a 2>;
@@ -202,7 +212,7 @@
reg = <a000 1000>;
bus-range = <0 ff>;
ranges = <02000000 0 a0000000 a0000000 0 10000000
- 01000000 0 00000000 e2800000 0 00800000>;
+ 01000000 0 00000000 e1020000 0 00010000>;
clock-frequency = <1fca055>;
interrupt-parent = <&mpic>;
interrupts = <19 2>;
@@ -224,49 +234,29 @@
#address-cells = <3>;
reg = <b000 1000>;
bus-range = <0 ff>;
- ranges = <02000000 0 b0000000 b0000000 0 10000000
- 01000000 0 00000000 e3800000 0 00800000>;
+ ranges = <02000000 0 b0000000 b0000000 0 00100000
+ 01000000 0 00000000 b0100000 0 00100000>;
clock-frequency = <1fca055>;
interrupt-parent = <&mpic>;
interrupts = <1b 2>;
- interrupt-map-mask = <f800 0 0 7>;
+ interrupt-map-mask = <fb00 0 0 0>;
interrupt-map = <
-
- // IDSEL 0x1a
- d000 0 0 1 &i8259 6 2
- d000 0 0 2 &i8259 3 2
- d000 0 0 3 &i8259 4 2
- d000 0 0 4 &i8259 5 2
-
- // IDSEL 0x1b
- d800 0 0 1 &i8259 5 2
- d800 0 0 2 &i8259 0 0
- d800 0 0 3 &i8259 0 0
- d800 0 0 4 &i8259 0 0
-
// IDSEL 0x1c USB
- e000 0 0 1 &i8259 9 2
- e000 0 0 2 &i8259 a 2
- e000 0 0 3 &i8259 c 2
- e000 0 0 4 &i8259 7 2
+ e000 0 0 0 &i8259 c 2
+ e100 0 0 0 &i8259 9 2
+ e200 0 0 0 &i8259 a 2
+ e300 0 0 0 &i8259 b 2
// IDSEL 0x1d Audio
- e800 0 0 1 &i8259 9 2
- e800 0 0 2 &i8259 a 2
- e800 0 0 3 &i8259 b 2
- e800 0 0 4 &i8259 0 0
+ e800 0 0 0 &i8259 6 2
// IDSEL 0x1e Legacy
- f000 0 0 1 &i8259 c 2
- f000 0 0 2 &i8259 0 0
- f000 0 0 3 &i8259 0 0
- f000 0 0 4 &i8259 0 0
+ f000 0 0 0 &i8259 7 2
+ f100 0 0 0 &i8259 7 2
// IDSEL 0x1f IDE/SATA
- f800 0 0 1 &i8259 6 2
- f800 0 0 2 &i8259 0 0
- f800 0 0 3 &i8259 0 0
- f800 0 0 4 &i8259 0 0
+ f800 0 0 0 &i8259 e 2
+ f900 0 0 0 &i8259 5 2
>;
uli1575@0 {
reg = <0 0 0 0 0>;
@@ -274,10 +264,10 @@
#address-cells = <3>;
ranges = <02000000 0 b0000000
02000000 0 b0000000
- 0 10000000
+ 0 00100000
01000000 0 00000000
01000000 0 00000000
- 0 00080000>;
+ 0 00100000>;
pci_bridge@0 {
reg = <0 0 0 0 0>;
@@ -285,10 +275,10 @@
#address-cells = <3>;
ranges = <02000000 0 b0000000
02000000 0 b0000000
- 0 20000000
+ 0 00100000
01000000 0 00000000
01000000 0 00000000
- 0 00100000>;
+ 0 00100000>;
isa@1e {
device_type = "isa";
@@ -296,7 +286,8 @@
#size-cells = <1>;
#address-cells = <2>;
reg = <f000 0 0 0 0>;
- ranges = <1 0 01000000 0 0
+ ranges = <1 0
+ 01000000 0 0
00001000>;
interrupt-parent = <&i8259>;
@@ -312,8 +303,7 @@
built-in;
compatible = "chrp,iic";
interrupts = <9 2>;
- interrupt-parent =
- <&mpic>;
+ interrupt-parent = <&mpic>;
};
i8042@60 {
@@ -321,8 +311,7 @@
#address-cells = <1>;
reg = <1 60 1 1 64 1>;
interrupts = <1 3 c 3>;
- interrupt-parent =
- <&i8259>;
+ interrupt-parent = <&i8259>;
keyboard@0 {
reg = <0>;
@@ -336,8 +325,7 @@
};
rtc@70 {
- compatible =
- "pnpPNP,b00";
+ compatible = "pnpPNP,b00";
reg = <1 70 2>;
};
diff --git a/arch/powerpc/boot/dts/mpc8641_hpcn.dts b/arch/powerpc/boot/dts/mpc8641_hpcn.dts
index 5d82709cfcbb..b0166e5c177e 100644
--- a/arch/powerpc/boot/dts/mpc8641_hpcn.dts
+++ b/arch/powerpc/boot/dts/mpc8641_hpcn.dts
@@ -224,98 +224,36 @@
clock-frequency = <1fca055>;
interrupt-parent = <&mpic>;
interrupts = <18 2>;
- interrupt-map-mask = <f800 0 0 7>;
+ interrupt-map-mask = <fb00 0 0 0>;
interrupt-map = <
/* IDSEL 0x11 */
- 8800 0 0 1 &i8259 3 2
- 8800 0 0 2 &i8259 4 2
- 8800 0 0 3 &i8259 5 2
- 8800 0 0 4 &i8259 6 2
+ 8800 0 0 1 &i8259 9 2
+ 8800 0 0 2 &i8259 a 2
+ 8800 0 0 3 &i8259 b 2
+ 8800 0 0 4 &i8259 c 2
/* IDSEL 0x12 */
- 9000 0 0 1 &i8259 4 2
- 9000 0 0 2 &i8259 5 2
- 9000 0 0 3 &i8259 6 2
- 9000 0 0 4 &i8259 3 2
-
- /* IDSEL 0x13 */
- 9800 0 0 1 &i8259 0 0
- 9800 0 0 2 &i8259 0 0
- 9800 0 0 3 &i8259 0 0
- 9800 0 0 4 &i8259 0 0
-
- /* IDSEL 0x14 */
- a000 0 0 1 &i8259 0 0
- a000 0 0 2 &i8259 0 0
- a000 0 0 3 &i8259 0 0
- a000 0 0 4 &i8259 0 0
-
- /* IDSEL 0x15 */
- a800 0 0 1 &i8259 0 0
- a800 0 0 2 &i8259 0 0
- a800 0 0 3 &i8259 0 0
- a800 0 0 4 &i8259 0 0
-
- /* IDSEL 0x16 */
- b000 0 0 1 &i8259 0 0
- b000 0 0 2 &i8259 0 0
- b000 0 0 3 &i8259 0 0
- b000 0 0 4 &i8259 0 0
-
- /* IDSEL 0x17 */
- b800 0 0 1 &i8259 0 0
- b800 0 0 2 &i8259 0 0
- b800 0 0 3 &i8259 0 0
- b800 0 0 4 &i8259 0 0
-
- /* IDSEL 0x18 */
- c000 0 0 1 &i8259 0 0
- c000 0 0 2 &i8259 0 0
- c000 0 0 3 &i8259 0 0
- c000 0 0 4 &i8259 0 0
-
- /* IDSEL 0x19 */
- c800 0 0 1 &i8259 0 0
- c800 0 0 2 &i8259 0 0
- c800 0 0 3 &i8259 0 0
- c800 0 0 4 &i8259 0 0
-
- /* IDSEL 0x1a */
- d000 0 0 1 &i8259 6 2
- d000 0 0 2 &i8259 3 2
- d000 0 0 3 &i8259 4 2
- d000 0 0 4 &i8259 5 2
-
-
- /* IDSEL 0x1b */
- d800 0 0 1 &i8259 5 2
- d800 0 0 2 &i8259 0 0
- d800 0 0 3 &i8259 0 0
- d800 0 0 4 &i8259 0 0
-
- /* IDSEL 0x1c */
- e000 0 0 1 &i8259 9 2
- e000 0 0 2 &i8259 a 2
- e000 0 0 3 &i8259 c 2
- e000 0 0 4 &i8259 7 2
-
- /* IDSEL 0x1d */
- e800 0 0 1 &i8259 9 2
- e800 0 0 2 &i8259 a 2
- e800 0 0 3 &i8259 b 2
- e800 0 0 4 &i8259 0 0
-
- /* IDSEL 0x1e */
- f000 0 0 1 &i8259 c 2
- f000 0 0 2 &i8259 0 0
- f000 0 0 3 &i8259 0 0
- f000 0 0 4 &i8259 0 0
-
- /* IDSEL 0x1f */
- f800 0 0 1 &i8259 6 2
- f800 0 0 2 &i8259 0 0
- f800 0 0 3 &i8259 0 0
- f800 0 0 4 &i8259 0 0
+ 9000 0 0 1 &i8259 a 2
+ 9000 0 0 2 &i8259 b 2
+ 9000 0 0 3 &i8259 c 2
+ 9000 0 0 4 &i8259 9 2
+
+ // IDSEL 0x1c USB
+ e000 0 0 0 &i8259 c 2
+ e100 0 0 0 &i8259 9 2
+ e200 0 0 0 &i8259 a 2
+ e300 0 0 0 &i8259 b 2
+
+ // IDSEL 0x1d Audio
+ e800 0 0 0 &i8259 6 2
+
+ // IDSEL 0x1e Legacy
+ f000 0 0 0 &i8259 7 2
+ f100 0 0 0 &i8259 7 2
+
+ // IDSEL 0x1f IDE/SATA
+ f800 0 0 0 &i8259 e 2
+ f900 0 0 0 &i8259 5 2
>;
uli1575@0 {
reg = <0 0 0 0 0>;
diff --git a/arch/powerpc/configs/cell_defconfig b/arch/powerpc/configs/cell_defconfig
index d9ac24e8de16..8b47c846421c 100644
--- a/arch/powerpc/configs/cell_defconfig
+++ b/arch/powerpc/configs/cell_defconfig
@@ -1,9 +1,23 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22-rc6
-# Tue Jun 26 12:32:34 2007
+# Linux kernel version: 2.6.23-rc3
+# Wed Aug 22 15:19:19 2007
#
CONFIG_PPC64=y
+
+#
+# Processor support
+#
+# CONFIG_POWER4_ONLY is not set
+CONFIG_POWER3=y
+CONFIG_POWER4=y
+CONFIG_PPC_FPU=y
+CONFIG_ALTIVEC=y
+CONFIG_PPC_STD_MMU=y
+CONFIG_PPC_MM_SLICES=y
+CONFIG_VIRT_CPU_ACCOUNTING=y
+CONFIG_SMP=y
+CONFIG_NR_CPUS=4
CONFIG_64BIT=y
CONFIG_PPC_MERGE=y
CONFIG_MMU=y
@@ -15,6 +29,7 @@ CONFIG_ARCH_HAS_ILOG2_U64=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_COMPAT=y
@@ -22,51 +37,33 @@ CONFIG_SYSVIPC_COMPAT=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
+CONFIG_OF=y
CONFIG_PPC_UDBG_16550=y
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
# CONFIG_DEFAULT_UIMAGE is not set
-
-#
-# Processor support
-#
-# CONFIG_POWER4_ONLY is not set
-CONFIG_POWER3=y
-CONFIG_POWER4=y
-CONFIG_PPC_FPU=y
# CONFIG_PPC_DCR_NATIVE is not set
CONFIG_PPC_DCR_MMIO=y
CONFIG_PPC_DCR=y
CONFIG_PPC_OF_PLATFORM_PCI=y
-CONFIG_ALTIVEC=y
-CONFIG_PPC_STD_MMU=y
-CONFIG_PPC_MM_SLICES=y
-CONFIG_VIRT_CPU_ACCOUNTING=y
-CONFIG_SMP=y
-CONFIG_NR_CPUS=4
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
-# Code maturity level options
+# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
+# CONFIG_USER_NS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
@@ -96,16 +93,13 @@ CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
@@ -113,12 +107,9 @@ CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
-
-#
-# Block layer
-#
CONFIG_BLOCK=y
# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_BLK_DEV_BSG is not set
#
# IO Schedulers
@@ -138,7 +129,9 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
#
CONFIG_PPC_MULTIPLATFORM=y
# CONFIG_EMBEDDED6xx is not set
-# CONFIG_APUS is not set
+# CONFIG_PPC_82xx is not set
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_86xx is not set
# CONFIG_PPC_PSERIES is not set
# CONFIG_PPC_ISERIES is not set
# CONFIG_PPC_MPC52xx is not set
@@ -158,7 +151,11 @@ CONFIG_PS3_HTAB_SIZE=20
CONFIG_PS3_USE_LPAR_ADDR=y
CONFIG_PS3_VUART=y
CONFIG_PS3_PS3AV=y
-CONFIG_PS3_SYS_MANAGER=y
+CONFIG_PS3_SYS_MANAGER=m
+CONFIG_PS3_STORAGE=y
+CONFIG_PS3_DISK=y
+CONFIG_PS3_ROM=m
+CONFIG_PS3_FLASH=m
CONFIG_PPC_CELL=y
CONFIG_PPC_CELL_NATIVE=y
CONFIG_PPC_IBM_CELL_BLADE=y
@@ -171,6 +168,7 @@ CONFIG_SPU_BASE=y
CONFIG_CBE_RAS=y
CONFIG_CBE_THERM=m
CONFIG_CBE_CPUFREQ=m
+CONFIG_CBE_CPUFREQ_PMI=m
# CONFIG_PQ2ADS is not set
CONFIG_PPC_NATIVE=y
CONFIG_UDBG_RTAS_CONSOLE=y
@@ -183,7 +181,7 @@ CONFIG_PPC_RTAS=y
# CONFIG_RTAS_ERROR_LOGGING is not set
CONFIG_RTAS_PROC=y
CONFIG_RTAS_FLASH=y
-# CONFIG_PPC_PMI is not set
+CONFIG_PPC_PMI=m
CONFIG_MMIO_NVRAM=y
# CONFIG_PPC_MPC106 is not set
# CONFIG_PPC_970_NAP is not set
@@ -206,6 +204,8 @@ CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
# CPU Frequency drivers
#
# CONFIG_CPM2 is not set
+CONFIG_AXON_RAM=m
+# CONFIG_FSL_ULI1575 is not set
#
# Kernel options
@@ -248,6 +248,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
CONFIG_RESOURCES_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
CONFIG_ARCH_MEMORY_PROBE=y
CONFIG_NODES_SPAN_OTHER_NODES=y
CONFIG_PPC_HAS_HASH_64K=y
@@ -268,7 +269,9 @@ CONFIG_GENERIC_ISA_DMA=y
# CONFIG_PPC_INDIRECT_PCI is not set
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
CONFIG_PCIEPORTBUS=y
+CONFIG_PCIEAER=y
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_DEBUG is not set
@@ -359,6 +362,7 @@ CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
@@ -377,6 +381,7 @@ CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
#
@@ -448,6 +453,7 @@ CONFIG_NET_CLS_ROUTE=y
# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
#
# Device Drivers
@@ -462,28 +468,12 @@ CONFIG_FW_LOADER=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
+CONFIG_OF_DEVICE=y
# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
@@ -499,14 +489,11 @@ CONFIG_BLK_DEV_RAM_SIZE=131072
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
+CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
-# CONFIG_BLINK is not set
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
@@ -572,6 +559,7 @@ CONFIG_BLK_DEV_IDEDMA=y
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
@@ -604,10 +592,7 @@ CONFIG_SCSI_WAIT_SCAN=m
# CONFIG_SCSI_ISCSI_ATTRS is not set
CONFIG_SCSI_SAS_ATTRS=y
# CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
+CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
@@ -622,7 +607,6 @@ CONFIG_SCSI_SAS_ATTRS=y
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
@@ -696,10 +680,6 @@ CONFIG_PATA_PDC2027X=m
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_SCC is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
@@ -717,6 +697,7 @@ CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
# CONFIG_DM_MULTIPATH_EMC is not set
+# CONFIG_DM_MULTIPATH_RDAC is not set
# CONFIG_DM_DELAY is not set
#
@@ -728,43 +709,30 @@ CONFIG_FUSION=y
CONFIG_FUSION_SAS=y
CONFIG_FUSION_MAX_SGE=128
# CONFIG_FUSION_CTL is not set
+# CONFIG_FUSION_LOGGING is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
-
-#
-# Network device support
-#
CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
CONFIG_BONDING=m
+CONFIG_MACVLAN=m
# CONFIG_EQUALIZER is not set
CONFIG_TUN=y
# CONFIG_ARCNET is not set
# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
-
-#
-# Tulip family network device support
-#
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_NET_PCI is not set
@@ -781,11 +749,12 @@ CONFIG_E1000_NAPI=y
# CONFIG_SIS190 is not set
CONFIG_SKGE=m
CONFIG_SKY2=m
-# CONFIG_SK98LIN is not set
+# CONFIG_SKY2_DEBUG is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=y
# CONFIG_BNX2 is not set
CONFIG_SPIDER_NET=y
+CONFIG_GELIC_NET=m
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
CONFIG_NETDEV_10000=y
@@ -824,15 +793,7 @@ CONFIG_NETDEV_10000=y
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
# CONFIG_PHONE is not set
#
@@ -925,10 +886,6 @@ CONFIG_UNIX98_PTYS=y
CONFIG_HVC_DRIVER=y
CONFIG_HVC_RTAS=y
CONFIG_HVC_BEAT=y
-
-#
-# IPMI
-#
CONFIG_IPMI_HANDLER=m
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=m
@@ -963,10 +920,6 @@ CONFIG_GEN_RTC=y
# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HANGCHECK_TIMER is not set
-
-#
-# TPM devices
-#
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
@@ -1000,6 +953,7 @@ CONFIG_I2C_ALGOBIT=y
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_TINY_USB is not set
# CONFIG_I2C_VIA is not set
@@ -1011,11 +965,13 @@ CONFIG_I2C_ALGOBIT=y
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
@@ -1026,11 +982,8 @@ CONFIG_I2C_ALGOBIT=y
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
#
@@ -1055,6 +1008,7 @@ CONFIG_I2C_ALGOBIT=y
#
# CONFIG_DISPLAY_SUPPORT is not set
# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
# CONFIG_FB is not set
# CONFIG_FB_IBM_GXT4500 is not set
@@ -1068,10 +1022,7 @@ CONFIG_DUMMY_CONSOLE=y
# Sound
#
# CONFIG_SOUND is not set
-
-#
-# HID Devices
-#
+CONFIG_HID_SUPPORT=y
CONFIG_HID=m
# CONFIG_HID_DEBUG is not set
@@ -1085,10 +1036,7 @@ CONFIG_HID=m
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
-
-#
-# USB support
-#
+CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
@@ -1122,6 +1070,7 @@ CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
#
# USB Device Class drivers
@@ -1199,23 +1148,7 @@ CONFIG_USB_MON=y
#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
-
-#
-# LED devices
-#
# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
CONFIG_INFINIBAND=m
CONFIG_INFINIBAND_USER_MAD=m
CONFIG_INFINIBAND_USER_ACCESS=m
@@ -1231,14 +1164,13 @@ CONFIG_INFINIBAND_IPOIB_DEBUG=y
CONFIG_INFINIBAND_IPOIB_DEBUG_DATA=y
# CONFIG_INFINIBAND_SRP is not set
# CONFIG_INFINIBAND_ISER is not set
+CONFIG_EDAC=y
#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
+# Reporting subsystems
#
+# CONFIG_EDAC_DEBUG is not set
+CONFIG_EDAC_MM_EDAC=y
# CONFIG_RTC_CLASS is not set
#
@@ -1255,6 +1187,12 @@ CONFIG_INFINIBAND_IPOIB_DEBUG_DATA=y
#
#
+# Userspace I/O
+#
+CONFIG_UIO=m
+# CONFIG_UIO_CIF is not set
+
+#
# File systems
#
CONFIG_EXT2_FS=y
@@ -1357,7 +1295,6 @@ CONFIG_SUNRPC=y
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
#
# Partition Types
@@ -1439,6 +1376,7 @@ CONFIG_BITREVERSE=y
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
@@ -1471,9 +1409,10 @@ CONFIG_DEBUG_FS=y
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
# CONFIG_DETECT_SOFTLOCKUP is not set
+CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
+# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
@@ -1504,10 +1443,6 @@ CONFIG_IRQSTACKS=y
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=m
@@ -1546,7 +1481,4 @@ CONFIG_CRYPTO_DEFLATE=m
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
+CONFIG_CRYPTO_HW=y
diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c
index 2bb1cb911783..d8502e377518 100644
--- a/arch/powerpc/kernel/traps.c
+++ b/arch/powerpc/kernel/traps.c
@@ -299,7 +299,7 @@ static inline int check_io_access(struct pt_regs *regs)
#ifndef CONFIG_FSL_BOOKE
#define get_mc_reason(regs) ((regs)->dsisr)
#else
-#define get_mc_reason(regs) (mfspr(SPRN_MCSR))
+#define get_mc_reason(regs) (mfspr(SPRN_MCSR) & MCSR_MASK)
#endif
#define REASON_FP ESR_FP
#define REASON_ILLEGAL (ESR_PIL | ESR_PUO)
@@ -414,8 +414,6 @@ void machine_check_exception(struct pt_regs *regs)
printk("Data Cache Push Parity Error\n");
if (reason & MCSR_DCPERR)
printk("Data Cache Parity Error\n");
- if (reason & MCSR_GL_CI)
- printk("Guarded Load or Cache-Inhibited stwcx.\n");
if (reason & MCSR_BUS_IAERR)
printk("Bus - Instruction Address Error\n");
if (reason & MCSR_BUS_RAERR)
diff --git a/arch/powerpc/mm/slb.c b/arch/powerpc/mm/slb.c
index a73d2d700973..ff1811ac6c81 100644
--- a/arch/powerpc/mm/slb.c
+++ b/arch/powerpc/mm/slb.c
@@ -74,6 +74,22 @@ static inline void slb_shadow_clear(unsigned long entry)
get_slb_shadow()->save_area[entry].esid = 0;
}
+static inline void create_shadowed_slbe(unsigned long ea, unsigned long flags,
+ unsigned long entry)
+{
+ /*
+ * Updating the shadow buffer before writing the SLB ensures
+ * we don't get a stale entry here if we get preempted by PHYP
+ * between these two statements.
+ */
+ slb_shadow_update(ea, flags, entry);
+
+ asm volatile("slbmte %0,%1" :
+ : "r" (mk_vsid_data(ea, flags)),
+ "r" (mk_esid_data(ea, entry))
+ : "memory" );
+}
+
void slb_flush_and_rebolt(void)
{
/* If you change this make sure you change SLB_NUM_BOLTED
@@ -226,12 +242,16 @@ void slb_initialize(void)
vflags = SLB_VSID_KERNEL | vmalloc_llp;
/* Invalidate the entire SLB (even slot 0) & all the ERATS */
- slb_shadow_update(PAGE_OFFSET, lflags, 0);
- asm volatile("isync; slbia; sync; slbmte %0,%1; isync" ::
- "r" (get_slb_shadow()->save_area[0].vsid),
- "r" (get_slb_shadow()->save_area[0].esid) : "memory");
-
- slb_shadow_update(VMALLOC_START, vflags, 1);
-
- slb_flush_and_rebolt();
+ asm volatile("isync":::"memory");
+ asm volatile("slbmte %0,%0"::"r" (0) : "memory");
+ asm volatile("isync; slbia; isync":::"memory");
+ create_shadowed_slbe(PAGE_OFFSET, lflags, 0);
+
+ create_shadowed_slbe(VMALLOC_START, vflags, 1);
+
+ /* We don't bolt the stack for the time being - we're in boot,
+ * so the stack is in the bolted segment. By the time it goes
+ * elsewhere, we'll call _switch() which will bolt in the new
+ * one. */
+ asm volatile("isync":::"memory");
}
diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig
index f58184086c8c..f620171ad6b1 100644
--- a/arch/powerpc/platforms/85xx/Kconfig
+++ b/arch/powerpc/platforms/85xx/Kconfig
@@ -33,6 +33,7 @@ config MPC8544_DS
bool "Freescale MPC8544 DS"
select PPC_I8259
select DEFAULT_UIMAGE
+ select FSL_ULI1575
help
This option enables support for the MPC8544 DS board
diff --git a/arch/powerpc/platforms/85xx/mpc8544_ds.c b/arch/powerpc/platforms/85xx/mpc8544_ds.c
index 4905f6f8903b..0f834d8be444 100644
--- a/arch/powerpc/platforms/85xx/mpc8544_ds.c
+++ b/arch/powerpc/platforms/85xx/mpc8544_ds.c
@@ -114,211 +114,25 @@ void __init mpc8544_ds_pic_init(void)
}
#ifdef CONFIG_PCI
-enum pirq { PIRQA = 8, PIRQB, PIRQC, PIRQD, PIRQE, PIRQF, PIRQG, PIRQH };
+extern int uses_fsl_uli_m1575;
+extern int uli_exclude_device(struct pci_controller *hose,
+ u_char bus, u_char devfn);
-/*
- * Value in table -- IRQ number
- */
-const unsigned char uli1575_irq_route_table[16] = {
- 0, /* 0: Reserved */
- 0x8,
- 0, /* 2: Reserved */
- 0x2,
- 0x4,
- 0x5,
- 0x7,
- 0x6,
- 0, /* 8: Reserved */
- 0x1,
- 0x3,
- 0x9,
- 0xb,
- 0, /* 13: Reserved */
- 0xd,
- 0xf,
-};
-
-static int __devinit
-get_pci_irq_from_of(struct pci_controller *hose, int slot, int pin)
-{
- struct of_irq oirq;
- u32 laddr[3];
- struct device_node *hosenode = hose ? hose->arch_data : NULL;
-
- if (!hosenode)
- return -EINVAL;
-
- laddr[0] = (hose->first_busno << 16) | (PCI_DEVFN(slot, 0) << 8);
- laddr[1] = laddr[2] = 0;
- of_irq_map_raw(hosenode, &pin, 1, laddr, &oirq);
- DBG("mpc8544_ds: pci irq addr %x, slot %d, pin %d, irq %d\n",
- laddr[0], slot, pin, oirq.specifier[0]);
- return oirq.specifier[0];
-}
-
-/*8259*/
-static void __devinit quirk_uli1575(struct pci_dev *dev)
-{
- unsigned short temp;
- struct pci_controller *hose = pci_bus_to_host(dev->bus);
- unsigned char irq2pin[16];
- unsigned long pirq_map_word = 0;
- u32 irq;
- int i;
-
- /*
- * ULI1575 interrupts route setup
- */
- memset(irq2pin, 0, 16); /* Initialize default value 0 */
-
- irq2pin[6]=PIRQA+3; /* enabled mapping for IRQ6 to PIRQD, used by SATA */
-
- /*
- * PIRQE -> PIRQF mapping set manually
- *
- * IRQ pin IRQ#
- * PIRQE ---- 9
- * PIRQF ---- 10
- * PIRQG ---- 11
- * PIRQH ---- 12
- */
- for (i = 0; i < 4; i++)
- irq2pin[i + 9] = PIRQE + i;
-
- /* Set IRQ-PIRQ Mapping to ULI1575 */
- for (i = 0; i < 16; i++)
- if (irq2pin[i])
- pirq_map_word |= (uli1575_irq_route_table[i] & 0xf)
- << ((irq2pin[i] - PIRQA) * 4);
-
- pirq_map_word |= 1<<26; /* disable INTx in EP mode*/
-
- /* ULI1575 IRQ mapping conf register default value is 0xb9317542 */
- DBG("Setup ULI1575 IRQ mapping configuration register value = 0x%x\n",
- (int)pirq_map_word);
- pci_write_config_dword(dev, 0x48, pirq_map_word);
-
-#define ULI1575_SET_DEV_IRQ(slot, pin, reg) \
- do { \
- int irq; \
- irq = get_pci_irq_from_of(hose, slot, pin); \
- if (irq > 0 && irq < 16) \
- pci_write_config_byte(dev, reg, irq2pin[irq]); \
- else \
- printk(KERN_WARNING "ULI1575 device" \
- "(slot %d, pin %d) irq %d is invalid.\n", \
- slot, pin, irq); \
- } while(0)
-
- /* USB 1.1 OHCI controller 1, slot 28, pin 1 */
- ULI1575_SET_DEV_IRQ(28, 1, 0x86);
-
- /* USB 1.1 OHCI controller 2, slot 28, pin 2 */
- ULI1575_SET_DEV_IRQ(28, 2, 0x87);
-
- /* USB 1.1 OHCI controller 3, slot 28, pin 3 */
- ULI1575_SET_DEV_IRQ(28, 3, 0x88);
-
- /* USB 2.0 controller, slot 28, pin 4 */
- irq = get_pci_irq_from_of(hose, 28, 4);
- if (irq >= 0 && irq <= 15)
- pci_write_config_dword(dev, 0x74, uli1575_irq_route_table[irq]);
-
- /* Audio controller, slot 29, pin 1 */
- ULI1575_SET_DEV_IRQ(29, 1, 0x8a);
-
- /* Modem controller, slot 29, pin 2 */
- ULI1575_SET_DEV_IRQ(29, 2, 0x8b);
-
- /* HD audio controller, slot 29, pin 3 */
- ULI1575_SET_DEV_IRQ(29, 3, 0x8c);
-
- /* SMB interrupt: slot 30, pin 1 */
- ULI1575_SET_DEV_IRQ(30, 1, 0x8e);
-
- /* PMU ACPI SCI interrupt: slot 30, pin 2 */
- ULI1575_SET_DEV_IRQ(30, 2, 0x8f);
-
- /* Serial ATA interrupt: slot 31, pin 1 */
- ULI1575_SET_DEV_IRQ(31, 1, 0x8d);
-
- /* Primary PATA IDE IRQ: 14
- * Secondary PATA IDE IRQ: 15
- */
- pci_write_config_byte(dev, 0x44, 0x30 | uli1575_irq_route_table[14]);
- pci_write_config_byte(dev, 0x75, uli1575_irq_route_table[15]);
-
- /* Set IRQ14 and IRQ15 to legacy IRQs */
- pci_read_config_word(dev, 0x46, &temp);
- temp |= 0xc000;
- pci_write_config_word(dev, 0x46, temp);
-
- /* Set i8259 interrupt trigger
- * IRQ 3: Level
- * IRQ 4: Level
- * IRQ 5: Level
- * IRQ 6: Level
- * IRQ 7: Level
- * IRQ 9: Level
- * IRQ 10: Level
- * IRQ 11: Level
- * IRQ 12: Level
- * IRQ 14: Edge
- * IRQ 15: Edge
- */
- outb(0xfa, 0x4d0);
- outb(0x1e, 0x4d1);
-
-#undef ULI1575_SET_DEV_IRQ
-}
-
-/* SATA */
-static void __devinit quirk_uli5288(struct pci_dev *dev)
+static int mpc85xx_exclude_device(struct pci_controller *hose,
+ u_char bus, u_char devfn)
{
- unsigned char c;
-
- pci_read_config_byte(dev, 0x83, &c);
- c |= 0x80; /* read/write lock */
- pci_write_config_byte(dev, 0x83, c);
-
- pci_write_config_byte(dev, 0x09, 0x01); /* Base class code: storage */
- pci_write_config_byte(dev, 0x0a, 0x06); /* IDE disk */
+ struct device_node* node;
+ struct resource rsrc;
- pci_read_config_byte(dev, 0x83, &c);
- c &= 0x7f;
- pci_write_config_byte(dev, 0x83, c);
-
- pci_read_config_byte(dev, 0x84, &c);
- c |= 0x01; /* emulated PATA mode enabled */
- pci_write_config_byte(dev, 0x84, c);
-}
+ node = (struct device_node *)hose->arch_data;
+ of_address_to_resource(node, 0, &rsrc);
-/* PATA */
-static void __devinit quirk_uli5229(struct pci_dev *dev)
-{
- unsigned short temp;
- pci_write_config_word(dev, 0x04, 0x0405); /* MEM IO MSI */
- pci_read_config_word(dev, 0x4a, &temp);
- temp |= 0x1000; /* Enable Native IRQ 14/15 */
- pci_write_config_word(dev, 0x4a, temp);
-}
+ if ((rsrc.start & 0xfffff) == 0xb000) {
+ return uli_exclude_device(hose, bus, devfn);
+ }
-/*Bridge*/
-static void __devinit early_uli5249(struct pci_dev *dev)
-{
- unsigned char temp;
- pci_write_config_word(dev, 0x04, 0x0007); /* mem access */
- pci_read_config_byte(dev, 0x7c, &temp);
- pci_write_config_byte(dev, 0x7c, 0x80); /* R/W lock control */
- pci_write_config_byte(dev, 0x09, 0x01); /* set as pci-pci bridge */
- pci_write_config_byte(dev, 0x7c, temp); /* restore pci bus debug control */
- dev->class |= 0x1;
+ return PCIBIOS_SUCCESSFUL;
}
-
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x1575, quirk_uli1575);
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5288, quirk_uli5288);
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5229, quirk_uli5229);
-DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_AL, 0x5249, early_uli5249);
#endif /* CONFIG_PCI */
/*
@@ -342,6 +156,8 @@ static void __init mpc8544_ds_setup_arch(void)
else
fsl_add_bridge(np, 0);
}
+ uses_fsl_uli_m1575 = 1;
+ ppc_md.pci_exclude_device = mpc85xx_exclude_device;
#endif
printk("MPC8544 DS board from Freescale Semiconductor\n");
diff --git a/arch/powerpc/platforms/86xx/Kconfig b/arch/powerpc/platforms/86xx/Kconfig
index 343b76d0d793..685b2fbbbe00 100644
--- a/arch/powerpc/platforms/86xx/Kconfig
+++ b/arch/powerpc/platforms/86xx/Kconfig
@@ -7,6 +7,7 @@ config MPC8641_HPCN
bool "Freescale MPC8641 HPCN"
select PPC_I8259
select DEFAULT_UIMAGE
+ select FSL_ULI1575
help
This option enables support for the MPC8641 HPCN board.
diff --git a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
index e9eaa0749ae6..56b27caf7a27 100644
--- a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
+++ b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c
@@ -107,220 +107,25 @@ mpc86xx_hpcn_init_irq(void)
}
#ifdef CONFIG_PCI
+extern int uses_fsl_uli_m1575;
+extern int uli_exclude_device(struct pci_controller *hose,
+ u_char bus, u_char devfn);
-enum pirq{PIRQA = 8, PIRQB, PIRQC, PIRQD, PIRQE, PIRQF, PIRQG, PIRQH};
-const unsigned char uli1575_irq_route_table[16] = {
- 0, /* 0: Reserved */
- 0x8, /* 1: 0b1000 */
- 0, /* 2: Reserved */
- 0x2, /* 3: 0b0010 */
- 0x4, /* 4: 0b0100 */
- 0x5, /* 5: 0b0101 */
- 0x7, /* 6: 0b0111 */
- 0x6, /* 7: 0b0110 */
- 0, /* 8: Reserved */
- 0x1, /* 9: 0b0001 */
- 0x3, /* 10: 0b0011 */
- 0x9, /* 11: 0b1001 */
- 0xb, /* 12: 0b1011 */
- 0, /* 13: Reserved */
- 0xd, /* 14, 0b1101 */
- 0xf, /* 15, 0b1111 */
-};
-
-static int __devinit
-get_pci_irq_from_of(struct pci_controller *hose, int slot, int pin)
-{
- struct of_irq oirq;
- u32 laddr[3];
- struct device_node *hosenode = hose ? hose->arch_data : NULL;
-
- if (!hosenode) return -EINVAL;
-
- laddr[0] = (hose->first_busno << 16) | (PCI_DEVFN(slot, 0) << 8);
- laddr[1] = laddr[2] = 0;
- of_irq_map_raw(hosenode, &pin, 1, laddr, &oirq);
- DBG("mpc86xx_hpcn: pci irq addr %x, slot %d, pin %d, irq %d\n",
- laddr[0], slot, pin, oirq.specifier[0]);
- return oirq.specifier[0];
-}
-
-static void __devinit quirk_uli1575(struct pci_dev *dev)
-{
- unsigned short temp;
- struct pci_controller *hose = pci_bus_to_host(dev->bus);
- unsigned char irq2pin[16], c;
- unsigned long pirq_map_word = 0;
- u32 irq;
- int i;
-
- /*
- * ULI1575 interrupts route setup
- */
- memset(irq2pin, 0, 16); /* Initialize default value 0 */
-
- /*
- * PIRQA -> PIRQD mapping read from OF-tree
- *
- * interrupts for PCI slot0 -- PIRQA / PIRQB / PIRQC / PIRQD
- * PCI slot1 -- PIRQB / PIRQC / PIRQD / PIRQA
- */
- for (i = 0; i < 4; i++){
- irq = get_pci_irq_from_of(hose, 17, i + 1);
- if (irq > 0 && irq < 16)
- irq2pin[irq] = PIRQA + i;
- else
- printk(KERN_WARNING "ULI1575 device"
- "(slot %d, pin %d) irq %d is invalid.\n",
- 17, i, irq);
- }
-
- /*
- * PIRQE -> PIRQF mapping set manually
- *
- * IRQ pin IRQ#
- * PIRQE ---- 9
- * PIRQF ---- 10
- * PIRQG ---- 11
- * PIRQH ---- 12
- */
- for (i = 0; i < 4; i++) irq2pin[i + 9] = PIRQE + i;
-
- /* Set IRQ-PIRQ Mapping to ULI1575 */
- for (i = 0; i < 16; i++)
- if (irq2pin[i])
- pirq_map_word |= (uli1575_irq_route_table[i] & 0xf)
- << ((irq2pin[i] - PIRQA) * 4);
-
- /* ULI1575 IRQ mapping conf register default value is 0xb9317542 */
- DBG("Setup ULI1575 IRQ mapping configuration register value = 0x%x\n",
- pirq_map_word);
- pci_write_config_dword(dev, 0x48, pirq_map_word);
-
-#define ULI1575_SET_DEV_IRQ(slot, pin, reg) \
- do { \
- int irq; \
- irq = get_pci_irq_from_of(hose, slot, pin); \
- if (irq > 0 && irq < 16) \
- pci_write_config_byte(dev, reg, irq2pin[irq]); \
- else \
- printk(KERN_WARNING "ULI1575 device" \
- "(slot %d, pin %d) irq %d is invalid.\n", \
- slot, pin, irq); \
- } while(0)
-
- /* USB 1.1 OHCI controller 1, slot 28, pin 1 */
- ULI1575_SET_DEV_IRQ(28, 1, 0x86);
-
- /* USB 1.1 OHCI controller 2, slot 28, pin 2 */
- ULI1575_SET_DEV_IRQ(28, 2, 0x87);
-
- /* USB 1.1 OHCI controller 3, slot 28, pin 3 */
- ULI1575_SET_DEV_IRQ(28, 3, 0x88);
-
- /* USB 2.0 controller, slot 28, pin 4 */
- irq = get_pci_irq_from_of(hose, 28, 4);
- if (irq >= 0 && irq <=15)
- pci_write_config_dword(dev, 0x74, uli1575_irq_route_table[irq]);
-
- /* Audio controller, slot 29, pin 1 */
- ULI1575_SET_DEV_IRQ(29, 1, 0x8a);
-
- /* Modem controller, slot 29, pin 2 */
- ULI1575_SET_DEV_IRQ(29, 2, 0x8b);
-
- /* HD audio controller, slot 29, pin 3 */
- ULI1575_SET_DEV_IRQ(29, 3, 0x8c);
-
- /* SMB interrupt: slot 30, pin 1 */
- ULI1575_SET_DEV_IRQ(30, 1, 0x8e);
-
- /* PMU ACPI SCI interrupt: slot 30, pin 2 */
- ULI1575_SET_DEV_IRQ(30, 2, 0x8f);
-
- /* Serial ATA interrupt: slot 31, pin 1 */
- ULI1575_SET_DEV_IRQ(31, 1, 0x8d);
-
- /* Primary PATA IDE IRQ: 14
- * Secondary PATA IDE IRQ: 15
- */
- pci_write_config_byte(dev, 0x44, 0x30 | uli1575_irq_route_table[14]);
- pci_write_config_byte(dev, 0x75, uli1575_irq_route_table[15]);
-
- /* Set IRQ14 and IRQ15 to legacy IRQs */
- pci_read_config_word(dev, 0x46, &temp);
- temp |= 0xc000;
- pci_write_config_word(dev, 0x46, temp);
-
- /* Set i8259 interrupt trigger
- * IRQ 3: Level
- * IRQ 4: Level
- * IRQ 5: Level
- * IRQ 6: Level
- * IRQ 7: Level
- * IRQ 9: Level
- * IRQ 10: Level
- * IRQ 11: Level
- * IRQ 12: Level
- * IRQ 14: Edge
- * IRQ 15: Edge
- */
- outb(0xfa, 0x4d0);
- outb(0x1e, 0x4d1);
-
-#undef ULI1575_SET_DEV_IRQ
-
- /* Disable the HD interface and enable the AC97 interface. */
- pci_read_config_byte(dev, 0xb8, &c);
- c &= 0x7f;
- pci_write_config_byte(dev, 0xb8, c);
-}
-
-static void __devinit quirk_uli5288(struct pci_dev *dev)
+static int mpc86xx_exclude_device(struct pci_controller *hose,
+ u_char bus, u_char devfn)
{
- unsigned char c;
+ struct device_node* node;
+ struct resource rsrc;
- pci_read_config_byte(dev,0x83,&c);
- c |= 0x80;
- pci_write_config_byte(dev, 0x83, c);
+ node = (struct device_node *)hose->arch_data;
+ of_address_to_resource(node, 0, &rsrc);
- pci_write_config_byte(dev, 0x09, 0x01);
- pci_write_config_byte(dev, 0x0a, 0x06);
-
- pci_read_config_byte(dev,0x83,&c);
- c &= 0x7f;
- pci_write_config_byte(dev, 0x83, c);
-
- pci_read_config_byte(dev,0x84,&c);
- c |= 0x01;
- pci_write_config_byte(dev, 0x84, c);
-}
-
-static void __devinit quirk_uli5229(struct pci_dev *dev)
-{
- unsigned short temp;
- pci_write_config_word(dev, 0x04, 0x0405);
- dev->class &= ~0x5;
- pci_read_config_word(dev, 0x4a, &temp);
- temp |= 0x1000;
- pci_write_config_word(dev, 0x4a, temp);
-}
+ if ((rsrc.start & 0xfffff) == 0x8000) {
+ return uli_exclude_device(hose, bus, devfn);
+ }
-static void __devinit early_uli5249(struct pci_dev *dev)
-{
- unsigned char temp;
- pci_write_config_word(dev, 0x04, 0x0007);
- pci_read_config_byte(dev, 0x7c, &temp);
- pci_write_config_byte(dev, 0x7c, 0x80);
- pci_write_config_byte(dev, 0x09, 0x01);
- pci_write_config_byte(dev, 0x7c, temp);
- dev->class |= 0x1;
+ return PCIBIOS_SUCCESSFUL;
}
-
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x1575, quirk_uli1575);
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5288, quirk_uli5288);
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5229, quirk_uli5229);
-DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_AL, 0x5249, early_uli5249);
#endif /* CONFIG_PCI */
@@ -353,6 +158,9 @@ mpc86xx_hpcn_setup_arch(void)
else
fsl_add_bridge(np, 0);
}
+ uses_fsl_uli_m1575 = 1;
+ ppc_md.pci_exclude_device = mpc86xx_exclude_device;
+
#endif
printk("MPC86xx HPCN board from Freescale Semiconductor\n");
diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig
index 2c937fb207fe..041df77ec117 100644
--- a/arch/powerpc/platforms/Kconfig
+++ b/arch/powerpc/platforms/Kconfig
@@ -283,4 +283,12 @@ config AXON_RAM
minor numbers are available in /proc/devices, /proc/partitions or
in /sys/block/axonram?/dev.
+config FSL_ULI1575
+ bool
+ default n
+ help
+ Supports for the ULI1575 PCIe south bridge that exists on some
+ Freescale reference boards. The boards all use the ULI in pretty
+ much the same way.
+
endmenu
diff --git a/arch/powerpc/platforms/Makefile b/arch/powerpc/platforms/Makefile
index d6e041a46d25..d44e832b01f2 100644
--- a/arch/powerpc/platforms/Makefile
+++ b/arch/powerpc/platforms/Makefile
@@ -1,3 +1,6 @@
+
+obj-$(CONFIG_FSL_ULI1575) += fsl_uli1575.o
+
ifeq ($(CONFIG_PPC_MERGE),y)
obj-$(CONFIG_PPC_PMAC) += powermac/
else
diff --git a/arch/powerpc/platforms/cell/cbe_regs.h b/arch/powerpc/platforms/cell/cbe_regs.h
index 17d597144877..b24025f2ac7a 100644
--- a/arch/powerpc/platforms/cell/cbe_regs.h
+++ b/arch/powerpc/platforms/cell/cbe_regs.h
@@ -113,10 +113,14 @@ struct cbe_pmd_regs {
u64 checkstop_fir; /* 0x0c00 */
u64 recoverable_fir; /* 0x0c08 */
u64 spec_att_mchk_fir; /* 0x0c10 */
- u64 fir_mode_reg; /* 0x0c18 */
+ u32 fir_mode_reg; /* 0x0c18 */
+ u8 pad_0x0c1c_0x0c20 [4]; /* 0x0c1c */
+#define CBE_PMD_FIR_MODE_M8 0x00800
u64 fir_enable_mask; /* 0x0c20 */
- u8 pad_0x0c28_0x1000 [0x1000 - 0x0c28]; /* 0x0c28 */
+ u8 pad_0x0c28_0x0ca8 [0x0ca8 - 0x0c28]; /* 0x0c28 */
+ u64 ras_esc_0; /* 0x0ca8 */
+ u8 pad_0x0cb0_0x1000 [0x1000 - 0x0cb0]; /* 0x0cb0 */
};
extern struct cbe_pmd_regs __iomem *cbe_get_pmd_regs(struct device_node *np);
diff --git a/arch/powerpc/platforms/cell/cbe_thermal.c b/arch/powerpc/platforms/cell/cbe_thermal.c
index e4132f8f51b3..fb5eda48467d 100644
--- a/arch/powerpc/platforms/cell/cbe_thermal.c
+++ b/arch/powerpc/platforms/cell/cbe_thermal.c
@@ -88,17 +88,13 @@ static struct cbe_pmd_regs __iomem *get_pmd_regs(struct sys_device *sysdev)
/* returns the value for a given spu in a given register */
static u8 spu_read_register_value(struct sys_device *sysdev, union spe_reg __iomem *reg)
{
- const unsigned int *id;
union spe_reg value;
struct spu *spu;
- /* getting the id from the reg attribute will not work on future device-tree layouts
- * in future we should store the id to the spu struct and use it here */
spu = container_of(sysdev, struct spu, sysdev);
- id = of_get_property(spu_devnode(spu), "reg", NULL);
value.val = in_be64(&reg->val);
- return value.spe[*id];
+ return value.spe[spu->spe_id];
}
static ssize_t spu_show_temp(struct sys_device *sysdev, char *buf)
diff --git a/arch/powerpc/platforms/cell/pervasive.c b/arch/powerpc/platforms/cell/pervasive.c
index 812bf563ed65..4ede22d363fa 100644
--- a/arch/powerpc/platforms/cell/pervasive.c
+++ b/arch/powerpc/platforms/cell/pervasive.c
@@ -38,6 +38,8 @@
#include "pervasive.h"
#include "cbe_regs.h"
+static int sysreset_hack;
+
static void cbe_power_save(void)
{
unsigned long ctrl, thread_switch_control;
@@ -85,6 +87,9 @@ static void cbe_power_save(void)
static int cbe_system_reset_exception(struct pt_regs *regs)
{
+ int cpu;
+ struct cbe_pmd_regs __iomem *pmd;
+
switch (regs->msr & SRR1_WAKEMASK) {
case SRR1_WAKEEE:
do_IRQ(regs);
@@ -93,6 +98,18 @@ static int cbe_system_reset_exception(struct pt_regs *regs)
timer_interrupt(regs);
break;
case SRR1_WAKEMT:
+ /*
+ * The BMC can inject user triggered system reset exceptions,
+ * but cannot set the system reset reason in srr1,
+ * so check an extra register here.
+ */
+ if (sysreset_hack && (cpu = smp_processor_id()) == 0) {
+ pmd = cbe_get_cpu_pmd_regs(cpu);
+ if (in_be64(&pmd->ras_esc_0) & 0xffff) {
+ out_be64(&pmd->ras_esc_0, 0);
+ return 0;
+ }
+ }
break;
#ifdef CONFIG_CBE_RAS
case SRR1_WAKESYSERR:
@@ -113,9 +130,12 @@ static int cbe_system_reset_exception(struct pt_regs *regs)
void __init cbe_pervasive_init(void)
{
int cpu;
+
if (!cpu_has_feature(CPU_FTR_PAUSE_ZERO))
return;
+ sysreset_hack = machine_is_compatible("IBM,CBPLUS-1.0");
+
for_each_possible_cpu(cpu) {
struct cbe_pmd_regs __iomem *regs = cbe_get_cpu_pmd_regs(cpu);
if (!regs)
@@ -124,6 +144,12 @@ void __init cbe_pervasive_init(void)
/* Enable Pause(0) control bit */
out_be64(&regs->pmcr, in_be64(&regs->pmcr) |
CBE_PMD_PAUSE_ZERO_CONTROL);
+
+ /* Enable JTAG system-reset hack */
+ if (sysreset_hack)
+ out_be32(&regs->fir_mode_reg,
+ in_be32(&regs->fir_mode_reg) |
+ CBE_PMD_FIR_MODE_M8);
}
ppc_md.power_save = cbe_power_save;
diff --git a/arch/powerpc/platforms/cell/spu_manage.c b/arch/powerpc/platforms/cell/spu_manage.c
index 5eb88346181a..7c0668a9dcc7 100644
--- a/arch/powerpc/platforms/cell/spu_manage.c
+++ b/arch/powerpc/platforms/cell/spu_manage.c
@@ -48,7 +48,7 @@ static u64 __init find_spu_unit_number(struct device_node *spe)
{
const unsigned int *prop;
int proplen;
- prop = of_get_property(spe, "unit-id", &proplen);
+ prop = of_get_property(spe, "physical-id", &proplen);
if (proplen == 4)
return (u64)*prop;
diff --git a/arch/powerpc/platforms/fsl_uli1575.c b/arch/powerpc/platforms/fsl_uli1575.c
new file mode 100644
index 000000000000..afc9141be63e
--- /dev/null
+++ b/arch/powerpc/platforms/fsl_uli1575.c
@@ -0,0 +1,255 @@
+/*
+ * ULI M1575 setup code - specific to Freescale boards
+ *
+ * Copyright 2007 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/interrupt.h>
+#include <linux/mc146818rtc.h>
+
+#include <asm/system.h>
+#include <asm/pci-bridge.h>
+
+#define ULI_PIRQA 0x08
+#define ULI_PIRQB 0x09
+#define ULI_PIRQC 0x0a
+#define ULI_PIRQD 0x0b
+#define ULI_PIRQE 0x0c
+#define ULI_PIRQF 0x0d
+#define ULI_PIRQG 0x0e
+
+#define ULI_8259_NONE 0x00
+#define ULI_8259_IRQ1 0x08
+#define ULI_8259_IRQ3 0x02
+#define ULI_8259_IRQ4 0x04
+#define ULI_8259_IRQ5 0x05
+#define ULI_8259_IRQ6 0x07
+#define ULI_8259_IRQ7 0x06
+#define ULI_8259_IRQ9 0x01
+#define ULI_8259_IRQ10 0x03
+#define ULI_8259_IRQ11 0x09
+#define ULI_8259_IRQ12 0x0b
+#define ULI_8259_IRQ14 0x0d
+#define ULI_8259_IRQ15 0x0f
+
+u8 uli_pirq_to_irq[8] = {
+ ULI_8259_IRQ9, /* PIRQA */
+ ULI_8259_IRQ10, /* PIRQB */
+ ULI_8259_IRQ11, /* PIRQC */
+ ULI_8259_IRQ12, /* PIRQD */
+ ULI_8259_IRQ5, /* PIRQE */
+ ULI_8259_IRQ6, /* PIRQF */
+ ULI_8259_IRQ7, /* PIRQG */
+ ULI_8259_NONE, /* PIRQH */
+};
+
+/* set in board code if you want this quirks to do something */
+int uses_fsl_uli_m1575;
+
+/* Bridge */
+static void __devinit early_uli5249(struct pci_dev *dev)
+{
+ unsigned char temp;
+
+ if (!uses_fsl_uli_m1575)
+ return;
+
+ pci_write_config_word(dev, PCI_COMMAND, PCI_COMMAND_IO |
+ PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
+
+ /* read/write lock */
+ pci_read_config_byte(dev, 0x7c, &temp);
+ pci_write_config_byte(dev, 0x7c, 0x80);
+
+ /* set as P2P bridge */
+ pci_write_config_byte(dev, PCI_CLASS_PROG, 0x01);
+ dev->class |= 0x1;
+
+ /* restore lock */
+ pci_write_config_byte(dev, 0x7c, temp);
+}
+
+
+static void __devinit quirk_uli1575(struct pci_dev *dev)
+{
+ int i;
+
+ if (!uses_fsl_uli_m1575)
+ return;
+
+ /*
+ * ULI1575 interrupts route setup
+ */
+
+ /* ULI1575 IRQ mapping conf register maps PIRQx to IRQn */
+ for (i = 0; i < 4; i++) {
+ u8 val = uli_pirq_to_irq[i*2] | (uli_pirq_to_irq[i*2+1] << 4);
+ pci_write_config_byte(dev, 0x48 + i, val);
+ }
+
+ /* USB 1.1 OHCI controller 1: dev 28, func 0 - IRQ12 */
+ pci_write_config_byte(dev, 0x86, ULI_PIRQD);
+
+ /* USB 1.1 OHCI controller 2: dev 28, func 1 - IRQ9 */
+ pci_write_config_byte(dev, 0x87, ULI_PIRQA);
+
+ /* USB 1.1 OHCI controller 3: dev 28, func 2 - IRQ10 */
+ pci_write_config_byte(dev, 0x88, ULI_PIRQB);
+
+ /* Lan controller: dev 27, func 0 - IRQ6 */
+ pci_write_config_byte(dev, 0x89, ULI_PIRQF);
+
+ /* AC97 Audio controller: dev 29, func 0 - IRQ6 */
+ pci_write_config_byte(dev, 0x8a, ULI_PIRQF);
+
+ /* Modem controller: dev 29, func 1 - IRQ6 */
+ pci_write_config_byte(dev, 0x8b, ULI_PIRQF);
+
+ /* HD Audio controller: dev 29, func 2 - IRQ6 */
+ pci_write_config_byte(dev, 0x8c, ULI_PIRQF);
+
+ /* SATA controller: dev 31, func 1 - IRQ5 */
+ pci_write_config_byte(dev, 0x8d, ULI_PIRQE);
+
+ /* SMB interrupt: dev 30, func 1 - IRQ7 */
+ pci_write_config_byte(dev, 0x8e, ULI_PIRQG);
+
+ /* PMU ACPI SCI interrupt: dev 30, func 2 - IRQ7 */
+ pci_write_config_byte(dev, 0x8f, ULI_PIRQG);
+
+ /* USB 2.0 controller: dev 28, func 3 */
+ pci_write_config_byte(dev, 0x74, ULI_8259_IRQ11);
+
+ /* Primary PATA IDE IRQ: 14
+ * Secondary PATA IDE IRQ: 15
+ */
+ pci_write_config_byte(dev, 0x44, 0x30 | ULI_8259_IRQ14);
+ pci_write_config_byte(dev, 0x75, ULI_8259_IRQ15);
+}
+
+static void __devinit quirk_final_uli1575(struct pci_dev *dev)
+{
+ /* Set i8259 interrupt trigger
+ * IRQ 3: Level
+ * IRQ 4: Level
+ * IRQ 5: Level
+ * IRQ 6: Level
+ * IRQ 7: Level
+ * IRQ 9: Level
+ * IRQ 10: Level
+ * IRQ 11: Level
+ * IRQ 12: Level
+ * IRQ 14: Edge
+ * IRQ 15: Edge
+ */
+ if (!uses_fsl_uli_m1575)
+ return;
+
+ outb(0xfa, 0x4d0);
+ outb(0x1e, 0x4d1);
+
+ /* setup RTC */
+ CMOS_WRITE(RTC_SET, RTC_CONTROL);
+ CMOS_WRITE(RTC_24H, RTC_CONTROL);
+
+ /* ensure month, date, and week alarm fields are ignored */
+ CMOS_WRITE(0, RTC_VALID);
+
+ outb_p(0x7c, 0x72);
+ outb_p(RTC_ALARM_DONT_CARE, 0x73);
+
+ outb_p(0x7d, 0x72);
+ outb_p(RTC_ALARM_DONT_CARE, 0x73);
+}
+
+/* SATA */
+static void __devinit quirk_uli5288(struct pci_dev *dev)
+{
+ unsigned char c;
+ unsigned int d;
+
+ if (!uses_fsl_uli_m1575)
+ return;
+
+ /* read/write lock */
+ pci_read_config_byte(dev, 0x83, &c);
+ pci_write_config_byte(dev, 0x83, c|0x80);
+
+ pci_read_config_dword(dev, PCI_CLASS_REVISION, &d);
+ d = (d & 0xff) | (PCI_CLASS_STORAGE_SATA_AHCI << 8);
+ pci_write_config_dword(dev, PCI_CLASS_REVISION, d);
+
+ /* restore lock */
+ pci_write_config_byte(dev, 0x83, c);
+
+ /* disable emulated PATA mode enabled */
+ pci_read_config_byte(dev, 0x84, &c);
+ pci_write_config_byte(dev, 0x84, c & ~0x01);
+}
+
+/* PATA */
+static void __devinit quirk_uli5229(struct pci_dev *dev)
+{
+ unsigned short temp;
+
+ if (!uses_fsl_uli_m1575)
+ return;
+
+ pci_write_config_word(dev, PCI_COMMAND, PCI_COMMAND_INTX_DISABLE |
+ PCI_COMMAND_MASTER | PCI_COMMAND_IO);
+
+ /* Enable Native IRQ 14/15 */
+ pci_read_config_word(dev, 0x4a, &temp);
+ pci_write_config_word(dev, 0x4a, temp | 0x1000);
+}
+
+/* We have to do a dummy read on the P2P for the RTC to work, WTF */
+static void __devinit quirk_final_uli5249(struct pci_dev *dev)
+{
+ int i;
+ u8 *dummy;
+ struct pci_bus *bus = dev->bus;
+
+ for (i = 0; i < PCI_BUS_NUM_RESOURCES; i++) {
+ if ((bus->resource[i]) &&
+ (bus->resource[i]->flags & IORESOURCE_MEM)) {
+ dummy = ioremap(bus->resource[i]->start, 0x4);
+ if (dummy) {
+ in_8(dummy);
+ iounmap(dummy);
+ }
+ break;
+ }
+ }
+}
+
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_AL, 0x5249, early_uli5249);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x1575, quirk_uli1575);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5288, quirk_uli5288);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5229, quirk_uli5229);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, 0x5249, quirk_final_uli5249);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, 0x1575, quirk_final_uli1575);
+
+int uli_exclude_device(struct pci_controller *hose,
+ u_char bus, u_char devfn)
+{
+ if (bus == (hose->first_busno + 2)) {
+ /* exclude Modem controller */
+ if ((PCI_SLOT(devfn) == 29) && (PCI_FUNC(devfn) == 1))
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ /* exclude HD Audio controller */
+ if ((PCI_SLOT(devfn) == 29) && (PCI_FUNC(devfn) == 2))
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ }
+
+ return PCIBIOS_SUCCESSFUL;
+}
diff --git a/arch/powerpc/platforms/pasemi/iommu.c b/arch/powerpc/platforms/pasemi/iommu.c
index c910ec9c2bdf..6c42787fb382 100644
--- a/arch/powerpc/platforms/pasemi/iommu.c
+++ b/arch/powerpc/platforms/pasemi/iommu.c
@@ -93,7 +93,7 @@ static void iobmap_build(struct iommu_table *tbl, long index,
pr_debug("iobmap: build at: %lx, %lx, addr: %lx\n", index, npages, uaddr);
- bus_addr = (tbl->it_offset + index) << PAGE_SHIFT;
+ bus_addr = (tbl->it_offset + index) << IOBMAP_PAGE_SHIFT;
ip = ((u32 *)tbl->it_base) + index;
@@ -118,7 +118,7 @@ static void iobmap_free(struct iommu_table *tbl, long index,
pr_debug("iobmap: free at: %lx, %lx\n", index, npages);
- bus_addr = (tbl->it_offset + index) << PAGE_SHIFT;
+ bus_addr = (tbl->it_offset + index) << IOBMAP_PAGE_SHIFT;
ip = ((u32 *)tbl->it_base) + index;
@@ -137,7 +137,7 @@ static void iommu_table_iobmap_setup(void)
iommu_table_iobmap.it_busno = 0;
iommu_table_iobmap.it_offset = 0;
/* it_size is in number of entries */
- iommu_table_iobmap.it_size = 0x80000000 >> PAGE_SHIFT;
+ iommu_table_iobmap.it_size = 0x80000000 >> IOBMAP_PAGE_SHIFT;
/* Initialize the common IOMMU code */
iommu_table_iobmap.it_base = (unsigned long)iob_l2_base;
diff --git a/arch/powerpc/sysdev/axonram.c b/arch/powerpc/sysdev/axonram.c
index 2326d5dc5752..ab037a3a40db 100644
--- a/arch/powerpc/sysdev/axonram.c
+++ b/arch/powerpc/sysdev/axonram.c
@@ -59,8 +59,7 @@
struct axon_ram_bank {
struct of_device *device;
struct gendisk *disk;
- unsigned int irq_correctable;
- unsigned int irq_uncorrectable;
+ unsigned int irq_id;
unsigned long ph_addr;
unsigned long io_addr;
unsigned long size;
@@ -93,16 +92,9 @@ axon_ram_irq_handler(int irq, void *dev)
BUG_ON(!bank);
- if (irq == bank->irq_correctable) {
- dev_err(&device->dev, "Correctable memory error occured\n");
- bank->ecc_counter++;
- return IRQ_HANDLED;
- } else if (irq == bank->irq_uncorrectable) {
- dev_err(&device->dev, "Uncorrectable memory error occured\n");
- panic("Critical ECC error on %s", device->node->full_name);
- }
-
- return IRQ_NONE;
+ dev_err(&device->dev, "Correctable memory error occured\n");
+ bank->ecc_counter++;
+ return IRQ_HANDLED;
}
/**
@@ -259,28 +251,18 @@ axon_ram_probe(struct of_device *device, const struct of_device_id *device_id)
blk_queue_hardsect_size(bank->disk->queue, AXON_RAM_SECTOR_SIZE);
add_disk(bank->disk);
- bank->irq_correctable = irq_of_parse_and_map(device->node, 0);
- bank->irq_uncorrectable = irq_of_parse_and_map(device->node, 1);
- if ((bank->irq_correctable <= 0) || (bank->irq_uncorrectable <= 0)) {
+ bank->irq_id = irq_of_parse_and_map(device->node, 0);
+ if (bank->irq_id == NO_IRQ) {
dev_err(&device->dev, "Cannot access ECC interrupt ID\n");
rc = -EFAULT;
goto failed;
}
- rc = request_irq(bank->irq_correctable, axon_ram_irq_handler,
- AXON_RAM_IRQ_FLAGS, bank->disk->disk_name, device);
- if (rc != 0) {
- dev_err(&device->dev, "Cannot register ECC interrupt handler\n");
- bank->irq_correctable = bank->irq_uncorrectable = 0;
- rc = -EFAULT;
- goto failed;
- }
-
- rc = request_irq(bank->irq_uncorrectable, axon_ram_irq_handler,
+ rc = request_irq(bank->irq_id, axon_ram_irq_handler,
AXON_RAM_IRQ_FLAGS, bank->disk->disk_name, device);
if (rc != 0) {
dev_err(&device->dev, "Cannot register ECC interrupt handler\n");
- bank->irq_uncorrectable = 0;
+ bank->irq_id = NO_IRQ;
rc = -EFAULT;
goto failed;
}
@@ -296,13 +278,9 @@ axon_ram_probe(struct of_device *device, const struct of_device_id *device_id)
failed:
if (bank != NULL) {
- if (bank->irq_uncorrectable > 0)
- free_irq(bank->irq_uncorrectable, device);
- if (bank->irq_correctable > 0)
- free_irq(bank->irq_correctable, device);
+ if (bank->irq_id != NO_IRQ)
+ free_irq(bank->irq_id, device);
if (bank->disk != NULL) {
- if (bank->disk->queue != NULL)
- blk_cleanup_queue(bank->disk->queue);
if (bank->disk->major > 0)
unregister_blkdev(bank->disk->major,
bank->disk->disk_name);
@@ -329,9 +307,7 @@ axon_ram_remove(struct of_device *device)
BUG_ON(!bank || !bank->disk);
device_remove_file(&device->dev, &dev_attr_ecc);
- free_irq(bank->irq_uncorrectable, device);
- free_irq(bank->irq_correctable, device);
- blk_cleanup_queue(bank->disk->queue);
+ free_irq(bank->irq_id, device);
unregister_blkdev(bank->disk->major, bank->disk->disk_name);
del_gendisk(bank->disk);
iounmap((void __iomem *) bank->io_addr);
diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c
index 9fb0ce5c7176..114c90f8f560 100644
--- a/arch/powerpc/sysdev/fsl_pci.c
+++ b/arch/powerpc/sysdev/fsl_pci.c
@@ -251,6 +251,8 @@ DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8568E, quirk_fsl_pcie_transpare
DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8568, quirk_fsl_pcie_transparent);
DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8567E, quirk_fsl_pcie_transparent);
DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8567, quirk_fsl_pcie_transparent);
+DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8533E, quirk_fsl_pcie_transparent);
+DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8533, quirk_fsl_pcie_transparent);
DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8544E, quirk_fsl_pcie_transparent);
DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8544, quirk_fsl_pcie_transparent);
DECLARE_PCI_FIXUP_EARLY(0x1957, PCI_DEVICE_ID_MPC8641, quirk_fsl_pcie_transparent);
diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c
index 565f57d777fe..f3abce11bead 100644
--- a/arch/powerpc/sysdev/fsl_soc.c
+++ b/arch/powerpc/sysdev/fsl_soc.c
@@ -22,6 +22,7 @@
#include <linux/module.h>
#include <linux/device.h>
#include <linux/platform_device.h>
+#include <linux/of_platform.h>
#include <linux/phy.h>
#include <linux/fsl_devices.h>
#include <linux/fs_enet_pd.h>
diff --git a/arch/powerpc/sysdev/rtc_cmos_setup.c b/arch/powerpc/sysdev/rtc_cmos_setup.c
index e276048b8c5f..0c9ac7ee08fb 100644
--- a/arch/powerpc/sysdev/rtc_cmos_setup.c
+++ b/arch/powerpc/sysdev/rtc_cmos_setup.c
@@ -20,14 +20,16 @@ static int __init add_rtc(void)
{
struct device_node *np;
struct platform_device *pd;
- struct resource res;
+ struct resource res[2];
int ret;
+ memset(&res, 0, sizeof(res));
+
np = of_find_compatible_node(NULL, NULL, "pnpPNP,b00");
if (!np)
return -ENODEV;
- ret = of_address_to_resource(np, 0, &res);
+ ret = of_address_to_resource(np, 0, &res[0]);
of_node_put(np);
if (ret)
return ret;
@@ -36,11 +38,18 @@ static int __init add_rtc(void)
* RTC_PORT(x) is hardcoded in asm/mc146818rtc.h. Verify that the
* address provided by the device node matches.
*/
- if (res.start != RTC_PORT(0))
+ if (res[0].start != RTC_PORT(0))
return -EINVAL;
+ /* Use a fixed interrupt value of 8 since on PPC if we are using this
+ * its off an i8259 which we ensure has interrupt numbers 0..15. */
+ res[1].start = 8;
+ res[1].end = 8;
+ res[1].flags = IORESOURCE_IRQ;
+
pd = platform_device_register_simple("rtc_cmos", -1,
- &res, 1);
+ &res[0], 2);
+
if (IS_ERR(pd))
return PTR_ERR(pd);
OpenPOWER on IntegriCloud