summaryrefslogtreecommitdiffstats
path: root/arch/powerpc
diff options
context:
space:
mode:
Diffstat (limited to 'arch/powerpc')
-rw-r--r--arch/powerpc/platforms/pasemi/Makefile2
-rw-r--r--arch/powerpc/platforms/pasemi/gpio_mdio.c339
-rw-r--r--arch/powerpc/platforms/pasemi/setup.c14
3 files changed, 354 insertions, 1 deletions
diff --git a/arch/powerpc/platforms/pasemi/Makefile b/arch/powerpc/platforms/pasemi/Makefile
index e657ccae90a9..e90265f610ef 100644
--- a/arch/powerpc/platforms/pasemi/Makefile
+++ b/arch/powerpc/platforms/pasemi/Makefile
@@ -1,2 +1,2 @@
-obj-y += setup.o pci.o time.o idle.o powersave.o iommu.o
+obj-y += setup.o pci.o time.o idle.o powersave.o iommu.o gpio_mdio.o
diff --git a/arch/powerpc/platforms/pasemi/gpio_mdio.c b/arch/powerpc/platforms/pasemi/gpio_mdio.c
new file mode 100644
index 000000000000..b1d3b6b420ae
--- /dev/null
+++ b/arch/powerpc/platforms/pasemi/gpio_mdio.c
@@ -0,0 +1,339 @@
+/*
+ * Copyright (C) 2006-2007 PA Semi, Inc
+ *
+ * Author: Olof Johansson, PA Semi
+ *
+ * Maintained by: Olof Johansson <olof@lixom.net>
+ *
+ * Based on drivers/net/fs_enet/mii-bitbang.c.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/sched.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/interrupt.h>
+#include <linux/phy.h>
+#include <linux/platform_device.h>
+#include <asm/of_platform.h>
+
+#define DELAY 1
+
+static void __iomem *gpio_regs;
+
+struct gpio_priv {
+ int mdc_pin;
+ int mdio_pin;
+};
+
+#define MDC_PIN(bus) (((struct gpio_priv *)bus->priv)->mdc_pin)
+#define MDIO_PIN(bus) (((struct gpio_priv *)bus->priv)->mdio_pin)
+
+static inline void mdio_lo(struct mii_bus *bus)
+{
+ out_le32(gpio_regs+0x10, 1 << MDIO_PIN(bus));
+}
+
+static inline void mdio_hi(struct mii_bus *bus)
+{
+ out_le32(gpio_regs, 1 << MDIO_PIN(bus));
+}
+
+static inline void mdc_lo(struct mii_bus *bus)
+{
+ out_le32(gpio_regs+0x10, 1 << MDC_PIN(bus));
+}
+
+static inline void mdc_hi(struct mii_bus *bus)
+{
+ out_le32(gpio_regs, 1 << MDC_PIN(bus));
+}
+
+static inline void mdio_active(struct mii_bus *bus)
+{
+ out_le32(gpio_regs+0x20, (1 << MDC_PIN(bus)) | (1 << MDIO_PIN(bus)));
+}
+
+static inline void mdio_tristate(struct mii_bus *bus)
+{
+ out_le32(gpio_regs+0x30, (1 << MDIO_PIN(bus)));
+}
+
+static inline int mdio_read(struct mii_bus *bus)
+{
+ return !!(in_le32(gpio_regs+0x40) & (1 << MDIO_PIN(bus)));
+}
+
+static void clock_out(struct mii_bus *bus, int bit)
+{
+ if (bit)
+ mdio_hi(bus);
+ else
+ mdio_lo(bus);
+ udelay(DELAY);
+ mdc_hi(bus);
+ udelay(DELAY);
+ mdc_lo(bus);
+}
+
+/* Utility to send the preamble, address, and register (common to read and write). */
+static void bitbang_pre(struct mii_bus *bus, int read, u8 addr, u8 reg)
+{
+ int i;
+
+ /* CFE uses a really long preamble (40 bits). We'll do the same. */
+ mdio_active(bus);
+ for (i = 0; i < 40; i++) {
+ clock_out(bus, 1);
+ }
+
+ /* send the start bit (01) and the read opcode (10) or write (10) */
+ clock_out(bus, 0);
+ clock_out(bus, 1);
+
+ clock_out(bus, read);
+ clock_out(bus, !read);
+
+ /* send the PHY address */
+ for (i = 0; i < 5; i++) {
+ clock_out(bus, (addr & 0x10) != 0);
+ addr <<= 1;
+ }
+
+ /* send the register address */
+ for (i = 0; i < 5; i++) {
+ clock_out(bus, (reg & 0x10) != 0);
+ reg <<= 1;
+ }
+}
+
+static int gpio_mdio_read(struct mii_bus *bus, int phy_id, int location)
+{
+ u16 rdreg;
+ int ret, i;
+ u8 addr = phy_id & 0xff;
+ u8 reg = location & 0xff;
+
+ bitbang_pre(bus, 1, addr, reg);
+
+ /* tri-state our MDIO I/O pin so we can read */
+ mdio_tristate(bus);
+ udelay(DELAY);
+ mdc_hi(bus);
+ udelay(DELAY);
+ mdc_lo(bus);
+
+ /* read 16 bits of register data, MSB first */
+ rdreg = 0;
+ for (i = 0; i < 16; i++) {
+ mdc_lo(bus);
+ udelay(DELAY);
+ mdc_hi(bus);
+ udelay(DELAY);
+ mdc_lo(bus);
+ udelay(DELAY);
+ rdreg <<= 1;
+ rdreg |= mdio_read(bus);
+ }
+
+ mdc_hi(bus);
+ udelay(DELAY);
+ mdc_lo(bus);
+ udelay(DELAY);
+
+ ret = rdreg;
+
+ return ret;
+}
+
+static int gpio_mdio_write(struct mii_bus *bus, int phy_id, int location, u16 val)
+{
+ int i;
+
+ u8 addr = phy_id & 0xff;
+ u8 reg = location & 0xff;
+ u16 value = val & 0xffff;
+
+ bitbang_pre(bus, 0, addr, reg);
+
+ /* send the turnaround (10) */
+ mdc_lo(bus);
+ mdio_hi(bus);
+ udelay(DELAY);
+ mdc_hi(bus);
+ udelay(DELAY);
+ mdc_lo(bus);
+ mdio_lo(bus);
+ udelay(DELAY);
+ mdc_hi(bus);
+ udelay(DELAY);
+
+ /* write 16 bits of register data, MSB first */
+ for (i = 0; i < 16; i++) {
+ mdc_lo(bus);
+ if (value & 0x8000)
+ mdio_hi(bus);
+ else
+ mdio_lo(bus);
+ udelay(DELAY);
+ mdc_hi(bus);
+ udelay(DELAY);
+ value <<= 1;
+ }
+
+ /*
+ * Tri-state the MDIO line.
+ */
+ mdio_tristate(bus);
+ mdc_lo(bus);
+ udelay(DELAY);
+ mdc_hi(bus);
+ udelay(DELAY);
+ return 0;
+}
+
+static int gpio_mdio_reset(struct mii_bus *bus)
+{
+ /*nothing here - dunno how to reset it*/
+ return 0;
+}
+
+
+static int __devinit gpio_mdio_probe(struct of_device *ofdev,
+ const struct of_device_id *match)
+{
+ struct device *dev = &ofdev->dev;
+ struct device_node *np = ofdev->node;
+ struct device_node *gpio_np;
+ struct mii_bus *new_bus;
+ struct resource res;
+ struct gpio_priv *priv;
+ const unsigned int *prop;
+ int err = 0;
+ int i;
+
+ gpio_np = of_find_compatible_node(NULL, "gpio", "1682m-gpio");
+
+ if (!gpio_np)
+ return -ENODEV;
+
+ err = of_address_to_resource(gpio_np, 0, &res);
+ of_node_put(gpio_np);
+
+ if (err)
+ return -EINVAL;
+
+ if (!gpio_regs)
+ gpio_regs = ioremap(res.start, 0x100);
+
+ if (!gpio_regs)
+ return -EPERM;
+
+ priv = kzalloc(sizeof(struct gpio_priv), GFP_KERNEL);
+ if (priv == NULL)
+ return -ENOMEM;
+
+ new_bus = kzalloc(sizeof(struct mii_bus), GFP_KERNEL);
+
+ if (new_bus == NULL)
+ return -ENOMEM;
+
+ new_bus->name = "pasemi gpio mdio bus",
+ new_bus->read = &gpio_mdio_read,
+ new_bus->write = &gpio_mdio_write,
+ new_bus->reset = &gpio_mdio_reset,
+
+ prop = get_property(np, "reg", NULL);
+ new_bus->id = *prop;
+ new_bus->priv = priv;
+
+ new_bus->phy_mask = 0;
+
+ new_bus->irq = kmalloc(sizeof(int)*PHY_MAX_ADDR, GFP_KERNEL);
+ for(i = 0; i < PHY_MAX_ADDR; ++i)
+ new_bus->irq[i] = irq_create_mapping(NULL, 10);
+
+
+ prop = get_property(np, "mdc-pin", NULL);
+ priv->mdc_pin = *prop;
+
+ prop = get_property(np, "mdio-pin", NULL);
+ priv->mdio_pin = *prop;
+
+ new_bus->dev = dev;
+ dev_set_drvdata(dev, new_bus);
+
+ err = mdiobus_register(new_bus);
+
+ if (0 != err) {
+ printk(KERN_ERR "%s: Cannot register as MDIO bus, err %d\n",
+ new_bus->name, err);
+ goto bus_register_fail;
+ }
+
+ return 0;
+
+bus_register_fail:
+ kfree(new_bus);
+
+ return err;
+}
+
+
+static int gpio_mdio_remove(struct of_device *dev)
+{
+ struct mii_bus *bus = dev_get_drvdata(&dev->dev);
+
+ mdiobus_unregister(bus);
+
+ dev_set_drvdata(&dev->dev, NULL);
+
+ kfree(bus->priv);
+ bus->priv = NULL;
+ kfree(bus);
+
+ return 0;
+}
+
+static struct of_device_id gpio_mdio_match[] =
+{
+ {
+ .compatible = "gpio-mdio",
+ },
+ {},
+};
+
+static struct of_platform_driver gpio_mdio_driver =
+{
+ .name = "gpio-mdio-bitbang",
+ .match_table = gpio_mdio_match,
+ .probe = gpio_mdio_probe,
+ .remove = gpio_mdio_remove,
+};
+
+int gpio_mdio_init(void)
+{
+ return of_register_platform_driver(&gpio_mdio_driver);
+}
+
+void gpio_mdio_exit(void)
+{
+ of_unregister_platform_driver(&gpio_mdio_driver);
+}
+device_initcall(gpio_mdio_init);
+
diff --git a/arch/powerpc/platforms/pasemi/setup.c b/arch/powerpc/platforms/pasemi/setup.c
index ffd96e947481..9944ffc02eeb 100644
--- a/arch/powerpc/platforms/pasemi/setup.c
+++ b/arch/powerpc/platforms/pasemi/setup.c
@@ -209,6 +209,20 @@ static void __init pas_init_early(void)
iommu_init_early_pasemi();
}
+static struct of_device_id pasemi_bus_ids[] = {
+ { .type = "sdc", },
+ {},
+};
+
+static int __init pasemi_publish_devices(void)
+{
+ /* Publish OF platform devices for southbridge IOs */
+ of_platform_bus_probe(NULL, pasemi_bus_ids, NULL);
+
+ return 0;
+}
+device_initcall(pasemi_publish_devices);
+
/*
* Called very early, MMU is off, device-tree isn't unflattened
OpenPOWER on IntegriCloud