diff options
Diffstat (limited to 'arch/powerpc/sysdev/todc.c')
| -rw-r--r-- | arch/powerpc/sysdev/todc.c | 392 |
1 files changed, 0 insertions, 392 deletions
diff --git a/arch/powerpc/sysdev/todc.c b/arch/powerpc/sysdev/todc.c deleted file mode 100644 index 0a65980efb50..000000000000 --- a/arch/powerpc/sysdev/todc.c +++ /dev/null @@ -1,392 +0,0 @@ -/* - * Time of Day Clock support for the M48T35, M48T37, M48T59, and MC146818 - * Real Time Clocks/Timekeepers. - * - * Author: Mark A. Greer <mgreer@mvista.com> - * - * 2001-2004 (c) MontaVista, Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ -#include <linux/errno.h> -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/time.h> -#include <linux/timex.h> -#include <linux/bcd.h> -#include <linux/mc146818rtc.h> - -#include <asm/machdep.h> -#include <asm/io.h> -#include <asm/time.h> -#include <asm/todc.h> - -/* - * Depending on the hardware on your board and your board design, the - * RTC/NVRAM may be accessed either directly (like normal memory) or via - * address/data registers. If your board uses the direct method, set - * 'nvram_data' to the base address of your nvram and leave 'nvram_as0' and - * 'nvram_as1' NULL. If your board uses address/data regs to access nvram, - * set 'nvram_as0' to the address of the lower byte, set 'nvram_as1' to the - * address of the upper byte (leave NULL if using mc146818), and set - * 'nvram_data' to the address of the 8-bit data register. - * - * Note: Even though the documentation for the various RTC chips say that it - * take up to a second before it starts updating once the 'R' bit is - * cleared, they always seem to update even though we bang on it many - * times a second. This is true, except for the Dallas Semi 1746/1747 - * (possibly others). Those chips seem to have a real problem whenever - * we set the 'R' bit before reading them, they basically stop counting. - * --MAG - */ - -/* - * 'todc_info' should be initialized in your *_setup.c file to - * point to a fully initialized 'todc_info_t' structure. - * This structure holds all the register offsets for your particular - * TODC/RTC chip. - * TODC_ALLOC()/TODC_INIT() will allocate and initialize this table for you. - */ - -#ifdef RTC_FREQ_SELECT -#undef RTC_FREQ_SELECT -#define RTC_FREQ_SELECT control_b /* Register A */ -#endif - -#ifdef RTC_CONTROL -#undef RTC_CONTROL -#define RTC_CONTROL control_a /* Register B */ -#endif - -#ifdef RTC_INTR_FLAGS -#undef RTC_INTR_FLAGS -#define RTC_INTR_FLAGS watchdog /* Register C */ -#endif - -#ifdef RTC_VALID -#undef RTC_VALID -#define RTC_VALID interrupts /* Register D */ -#endif - -/* Access routines when RTC accessed directly (like normal memory) */ -u_char -todc_direct_read_val(int addr) -{ - return readb((void __iomem *)(todc_info->nvram_data + addr)); -} - -void -todc_direct_write_val(int addr, unsigned char val) -{ - writeb(val, (void __iomem *)(todc_info->nvram_data + addr)); - return; -} - -/* Access routines for accessing m48txx type chips via addr/data regs */ -u_char -todc_m48txx_read_val(int addr) -{ - outb(addr, todc_info->nvram_as0); - outb(addr>>todc_info->as0_bits, todc_info->nvram_as1); - return inb(todc_info->nvram_data); -} - -void -todc_m48txx_write_val(int addr, unsigned char val) -{ - outb(addr, todc_info->nvram_as0); - outb(addr>>todc_info->as0_bits, todc_info->nvram_as1); - outb(val, todc_info->nvram_data); - return; -} - -/* Access routines for accessing mc146818 type chips via addr/data regs */ -u_char -todc_mc146818_read_val(int addr) -{ - outb_p(addr, todc_info->nvram_as0); - return inb_p(todc_info->nvram_data); -} - -void -todc_mc146818_write_val(int addr, unsigned char val) -{ - outb_p(addr, todc_info->nvram_as0); - outb_p(val, todc_info->nvram_data); -} - - -/* - * Routines to make RTC chips with NVRAM buried behind an addr/data pair - * have the NVRAM and clock regs appear at the same level. - * The NVRAM will appear to start at addr 0 and the clock regs will appear - * to start immediately after the NVRAM (actually, start at offset - * todc_info->nvram_size). - */ -static inline u_char -todc_read_val(int addr) -{ - u_char val; - - if (todc_info->sw_flags & TODC_FLAG_2_LEVEL_NVRAM) { - if (addr < todc_info->nvram_size) { /* NVRAM */ - ppc_md.rtc_write_val(todc_info->nvram_addr_reg, addr); - val = ppc_md.rtc_read_val(todc_info->nvram_data_reg); - } else { /* Clock Reg */ - addr -= todc_info->nvram_size; - val = ppc_md.rtc_read_val(addr); - } - } else - val = ppc_md.rtc_read_val(addr); - - return val; -} - -static inline void -todc_write_val(int addr, u_char val) -{ - if (todc_info->sw_flags & TODC_FLAG_2_LEVEL_NVRAM) { - if (addr < todc_info->nvram_size) { /* NVRAM */ - ppc_md.rtc_write_val(todc_info->nvram_addr_reg, addr); - ppc_md.rtc_write_val(todc_info->nvram_data_reg, val); - } else { /* Clock Reg */ - addr -= todc_info->nvram_size; - ppc_md.rtc_write_val(addr, val); - } - } else - ppc_md.rtc_write_val(addr, val); -} - -/* - * TODC routines - * - * There is some ugly stuff in that there are assumptions for the mc146818. - * - * Assumptions: - * - todc_info->control_a has the offset as mc146818 Register B reg - * - todc_info->control_b has the offset as mc146818 Register A reg - * - m48txx control reg's write enable or 'W' bit is same as - * mc146818 Register B 'SET' bit (i.e., 0x80) - * - * These assumptions were made to make the code simpler. - */ -long __init -todc_time_init(void) -{ - u_char cntl_b; - - if (!ppc_md.rtc_read_val) - ppc_md.rtc_read_val = ppc_md.nvram_read_val; - if (!ppc_md.rtc_write_val) - ppc_md.rtc_write_val = ppc_md.nvram_write_val; - - cntl_b = todc_read_val(todc_info->control_b); - - if (todc_info->rtc_type == TODC_TYPE_MC146818) { - if ((cntl_b & 0x70) != 0x20) { - printk(KERN_INFO "TODC real-time-clock was stopped." - " Now starting..."); - cntl_b &= ~0x70; - cntl_b |= 0x20; - } - - todc_write_val(todc_info->control_b, cntl_b); - } else if (todc_info->rtc_type == TODC_TYPE_DS17285) { - u_char mode; - - mode = todc_read_val(TODC_TYPE_DS17285_CNTL_A); - /* Make sure countdown clear is not set */ - mode &= ~0x40; - /* Enable oscillator, extended register set */ - mode |= 0x30; - todc_write_val(TODC_TYPE_DS17285_CNTL_A, mode); - - } else if (todc_info->rtc_type == TODC_TYPE_DS1501) { - u_char month; - - todc_info->enable_read = TODC_DS1501_CNTL_B_TE; - todc_info->enable_write = TODC_DS1501_CNTL_B_TE; - - month = todc_read_val(todc_info->month); - - if ((month & 0x80) == 0x80) { - printk(KERN_INFO "TODC %s %s\n", - "real-time-clock was stopped.", - "Now starting..."); - month &= ~0x80; - todc_write_val(todc_info->month, month); - } - - cntl_b &= ~TODC_DS1501_CNTL_B_TE; - todc_write_val(todc_info->control_b, cntl_b); - } else { /* must be a m48txx type */ - u_char cntl_a; - - todc_info->enable_read = TODC_MK48TXX_CNTL_A_R; - todc_info->enable_write = TODC_MK48TXX_CNTL_A_W; - - cntl_a = todc_read_val(todc_info->control_a); - - /* Check & clear STOP bit in control B register */ - if (cntl_b & TODC_MK48TXX_DAY_CB) { - printk(KERN_INFO "TODC %s %s\n", - "real-time-clock was stopped.", - "Now starting..."); - - cntl_a |= todc_info->enable_write; - cntl_b &= ~TODC_MK48TXX_DAY_CB;/* Start Oscil */ - - todc_write_val(todc_info->control_a, cntl_a); - todc_write_val(todc_info->control_b, cntl_b); - } - - /* Make sure READ & WRITE bits are cleared. */ - cntl_a &= ~(todc_info->enable_write | todc_info->enable_read); - todc_write_val(todc_info->control_a, cntl_a); - } - - return 0; -} - -/* - * There is some ugly stuff in that there are assumptions that for a mc146818, - * the todc_info->control_a has the offset of the mc146818 Register B reg and - * that the register'ss 'SET' bit is the same as the m48txx's write enable - * bit in the control register of the m48txx (i.e., 0x80). - * - * It was done to make the code look simpler. - */ -void -todc_get_rtc_time(struct rtc_time *tm) -{ - uint year = 0, mon = 0, mday = 0, hour = 0, min = 0, sec = 0; - uint limit, i; - u_char save_control, uip = 0; - extern void GregorianDay(struct rtc_time *); - - spin_lock(&rtc_lock); - save_control = todc_read_val(todc_info->control_a); - - if (todc_info->rtc_type != TODC_TYPE_MC146818) { - limit = 1; - - switch (todc_info->rtc_type) { - case TODC_TYPE_DS1553: - case TODC_TYPE_DS1557: - case TODC_TYPE_DS1743: - case TODC_TYPE_DS1746: /* XXXX BAD HACK -> FIX */ - case TODC_TYPE_DS1747: - case TODC_TYPE_DS17285: - break; - default: - todc_write_val(todc_info->control_a, - (save_control | todc_info->enable_read)); - } - } else - limit = 100000000; - - for (i=0; i<limit; i++) { - if (todc_info->rtc_type == TODC_TYPE_MC146818) - uip = todc_read_val(todc_info->RTC_FREQ_SELECT); - - sec = todc_read_val(todc_info->seconds) & 0x7f; - min = todc_read_val(todc_info->minutes) & 0x7f; - hour = todc_read_val(todc_info->hours) & 0x3f; - mday = todc_read_val(todc_info->day_of_month) & 0x3f; - mon = todc_read_val(todc_info->month) & 0x1f; - year = todc_read_val(todc_info->year) & 0xff; - - if (todc_info->rtc_type == TODC_TYPE_MC146818) { - uip |= todc_read_val(todc_info->RTC_FREQ_SELECT); - if ((uip & RTC_UIP) == 0) - break; - } - } - - if (todc_info->rtc_type != TODC_TYPE_MC146818) { - switch (todc_info->rtc_type) { - case TODC_TYPE_DS1553: - case TODC_TYPE_DS1557: - case TODC_TYPE_DS1743: - case TODC_TYPE_DS1746: /* XXXX BAD HACK -> FIX */ - case TODC_TYPE_DS1747: - case TODC_TYPE_DS17285: - break; - default: - save_control &= ~(todc_info->enable_read); - todc_write_val(todc_info->control_a, save_control); - } - } - spin_unlock(&rtc_lock); - - if ((todc_info->rtc_type != TODC_TYPE_MC146818) - || ((save_control & RTC_DM_BINARY) == 0) - || RTC_ALWAYS_BCD) { - BCD_TO_BIN(sec); - BCD_TO_BIN(min); - BCD_TO_BIN(hour); - BCD_TO_BIN(mday); - BCD_TO_BIN(mon); - BCD_TO_BIN(year); - } - - if ((year + 1900) < 1970) { - year += 100; - } - - tm->tm_sec = sec; - tm->tm_min = min; - tm->tm_hour = hour; - tm->tm_mday = mday; - tm->tm_mon = mon; - tm->tm_year = year; - - GregorianDay(tm); -} - -int -todc_set_rtc_time(struct rtc_time *tm) -{ - u_char save_control, save_freq_select = 0; - - spin_lock(&rtc_lock); - save_control = todc_read_val(todc_info->control_a); - - /* Assuming MK48T59_RTC_CA_WRITE & RTC_SET are equal */ - todc_write_val(todc_info->control_a, - (save_control | todc_info->enable_write)); - save_control &= ~(todc_info->enable_write); /* in case it was set */ - - if (todc_info->rtc_type == TODC_TYPE_MC146818) { - save_freq_select = todc_read_val(todc_info->RTC_FREQ_SELECT); - todc_write_val(todc_info->RTC_FREQ_SELECT, - save_freq_select | RTC_DIV_RESET2); - } - - if ((todc_info->rtc_type != TODC_TYPE_MC146818) - || ((save_control & RTC_DM_BINARY) == 0) - || RTC_ALWAYS_BCD) { - BIN_TO_BCD(tm->tm_sec); - BIN_TO_BCD(tm->tm_min); - BIN_TO_BCD(tm->tm_hour); - BIN_TO_BCD(tm->tm_mon); - BIN_TO_BCD(tm->tm_mday); - BIN_TO_BCD(tm->tm_year); - } - - todc_write_val(todc_info->seconds, tm->tm_sec); - todc_write_val(todc_info->minutes, tm->tm_min); - todc_write_val(todc_info->hours, tm->tm_hour); - todc_write_val(todc_info->month, tm->tm_mon); - todc_write_val(todc_info->day_of_month, tm->tm_mday); - todc_write_val(todc_info->year, tm->tm_year); - - todc_write_val(todc_info->control_a, save_control); - - if (todc_info->rtc_type == TODC_TYPE_MC146818) - todc_write_val(todc_info->RTC_FREQ_SELECT, save_freq_select); - - spin_unlock(&rtc_lock); - return 0; -} |
