diff options
Diffstat (limited to 'arch/powerpc/platforms')
| -rw-r--r-- | arch/powerpc/platforms/83xx/Makefile | 2 | ||||
| -rw-r--r-- | arch/powerpc/platforms/83xx/mpc8313_rdb.c | 1 | ||||
| -rw-r--r-- | arch/powerpc/platforms/83xx/mpc834x_mds.c | 49 | ||||
| -rw-r--r-- | arch/powerpc/platforms/83xx/mpc83xx.h | 28 | ||||
| -rw-r--r-- | arch/powerpc/platforms/83xx/usb.c | 181 |
5 files changed, 213 insertions, 48 deletions
diff --git a/arch/powerpc/platforms/83xx/Makefile b/arch/powerpc/platforms/83xx/Makefile index 31a91b53f528..5a98f885779f 100644 --- a/arch/powerpc/platforms/83xx/Makefile +++ b/arch/powerpc/platforms/83xx/Makefile @@ -1,7 +1,7 @@ # # Makefile for the PowerPC 83xx linux kernel. # -obj-y := misc.o +obj-y := misc.o usb.o obj-$(CONFIG_PCI) += pci.o obj-$(CONFIG_MPC8313_RDB) += mpc8313_rdb.o obj-$(CONFIG_MPC832x_RDB) += mpc832x_rdb.o diff --git a/arch/powerpc/platforms/83xx/mpc8313_rdb.c b/arch/powerpc/platforms/83xx/mpc8313_rdb.c index 4dee22ad14b4..3edfe170a03b 100644 --- a/arch/powerpc/platforms/83xx/mpc8313_rdb.c +++ b/arch/powerpc/platforms/83xx/mpc8313_rdb.c @@ -48,6 +48,7 @@ static void __init mpc8313_rdb_setup_arch(void) ppc_md.pci_exclude_device = mpc83xx_exclude_device; #endif + mpc831x_usb_cfg(); } void __init mpc8313_rdb_init_IRQ(void) diff --git a/arch/powerpc/platforms/83xx/mpc834x_mds.c b/arch/powerpc/platforms/83xx/mpc834x_mds.c index 8607441c3953..4c9ff9cadfe4 100644 --- a/arch/powerpc/platforms/83xx/mpc834x_mds.c +++ b/arch/powerpc/platforms/83xx/mpc834x_mds.c @@ -39,55 +39,16 @@ #include "mpc83xx.h" #define BCSR5_INT_USB 0x02 -/* Note: This is only for PB, not for PB+PIB - * On PB only port0 is connected using ULPI */ -static int mpc834x_usb_cfg(void) +static int mpc834xemds_usb_cfg(void) { - unsigned long sccr, sicrl; - void __iomem *immap; + struct device_node *np; void __iomem *bcsr_regs = NULL; u8 bcsr5; - struct device_node *np = NULL; - int port0_is_dr = 0; - - if ((np = of_find_compatible_node(NULL, "usb", "fsl-usb2-dr")) != NULL) - port0_is_dr = 1; - if ((np = of_find_compatible_node(NULL, "usb", "fsl-usb2-mph")) != NULL){ - if (port0_is_dr) { - printk(KERN_WARNING - "There is only one USB port on PB board! \n"); - return -1; - } else if (!port0_is_dr) - /* No usb port enabled */ - return -1; - } - - immap = ioremap(get_immrbase(), 0x1000); - if (!immap) - return -1; - - /* Configure clock */ - sccr = in_be32(immap + MPC83XX_SCCR_OFFS); - if (port0_is_dr) - sccr |= MPC83XX_SCCR_USB_DRCM_11; /* 1:3 */ - else - sccr |= MPC83XX_SCCR_USB_MPHCM_11; /* 1:3 */ - out_be32(immap + MPC83XX_SCCR_OFFS, sccr); - - /* Configure Pin */ - sicrl = in_be32(immap + MPC83XX_SICRL_OFFS); - /* set port0 only */ - if (port0_is_dr) - sicrl |= MPC83XX_SICRL_USB0; - else - sicrl &= ~(MPC83XX_SICRL_USB0); - out_be32(immap + MPC83XX_SICRL_OFFS, sicrl); - - iounmap(immap); + mpc834x_usb_cfg(); /* Map BCSR area */ np = of_find_node_by_name(NULL, "bcsr"); - if (np != 0) { + if (np) { struct resource res; of_address_to_resource(np, 0, &res); @@ -129,7 +90,7 @@ static void __init mpc834x_mds_setup_arch(void) ppc_md.pci_exclude_device = mpc83xx_exclude_device; #endif - mpc834x_usb_cfg(); + mpc834xemds_usb_cfg(); } static void __init mpc834x_mds_init_IRQ(void) diff --git a/arch/powerpc/platforms/83xx/mpc83xx.h b/arch/powerpc/platforms/83xx/mpc83xx.h index f5c5034a8461..589ee55730f3 100644 --- a/arch/powerpc/platforms/83xx/mpc83xx.h +++ b/arch/powerpc/platforms/83xx/mpc83xx.h @@ -7,6 +7,7 @@ /* System Clock Control Register */ #define MPC83XX_SCCR_OFFS 0xA08 +#define MPC83XX_SCCR_USB_MASK 0x00f00000 #define MPC83XX_SCCR_USB_MPHCM_11 0x00c00000 #define MPC83XX_SCCR_USB_MPHCM_01 0x00400000 #define MPC83XX_SCCR_USB_MPHCM_10 0x00800000 @@ -16,12 +17,31 @@ /* system i/o configuration register low */ #define MPC83XX_SICRL_OFFS 0x114 -#define MPC83XX_SICRL_USB0 0x40000000 -#define MPC83XX_SICRL_USB1 0x20000000 +#define MPC834X_SICRL_USB_MASK 0x60000000 +#define MPC834X_SICRL_USB0 0x40000000 +#define MPC834X_SICRL_USB1 0x20000000 +#define MPC831X_SICRL_USB_MASK 0x00000c00 +#define MPC831X_SICRL_USB_ULPI 0x00000800 /* system i/o configuration register high */ #define MPC83XX_SICRH_OFFS 0x118 -#define MPC83XX_SICRH_USB_UTMI 0x00020000 +#define MPC834X_SICRH_USB_UTMI 0x00020000 +#define MPC831X_SICRH_USB_MASK 0x000000e0 +#define MPC831X_SICRH_USB_ULPI 0x000000a0 + +/* USB Control Register */ +#define FSL_USB2_CONTROL_OFFS 0x500 +#define CONTROL_UTMI_PHY_EN 0x00000200 +#define CONTROL_REFSEL_48MHZ 0x00000080 +#define CONTROL_PHY_CLK_SEL_ULPI 0x00000400 +#define CONTROL_OTG_PORT 0x00000020 + +/* USB PORTSC Registers */ +#define FSL_USB2_PORTSC1_OFFS 0x184 +#define FSL_USB2_PORTSC2_OFFS 0x188 +#define PORTSCX_PTW_16BIT 0x10000000 +#define PORTSCX_PTS_UTMI 0x00000000 +#define PORTSCX_PTS_ULPI 0x80000000 /* * Declaration for the various functions exported by the @@ -33,5 +53,7 @@ extern int mpc83xx_exclude_device(struct pci_controller *hose, u_char bus, u_char devfn); extern void mpc83xx_restart(char *cmd); extern long mpc83xx_time_init(void); +extern int mpc834x_usb_cfg(void); +extern int mpc831x_usb_cfg(void); #endif /* __MPC83XX_H__ */ diff --git a/arch/powerpc/platforms/83xx/usb.c b/arch/powerpc/platforms/83xx/usb.c new file mode 100644 index 000000000000..e7fdf013cd39 --- /dev/null +++ b/arch/powerpc/platforms/83xx/usb.c @@ -0,0 +1,181 @@ +/* + * Freescale 83xx USB SOC setup code + * + * Copyright (C) 2007 Freescale Semiconductor, Inc. + * Author: Li Yang + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + + +#include <linux/stddef.h> +#include <linux/kernel.h> +#include <linux/errno.h> + +#include <asm/io.h> +#include <asm/prom.h> +#include <sysdev/fsl_soc.h> + +#include "mpc83xx.h" + + +#ifdef CONFIG_MPC834x +int mpc834x_usb_cfg(void) +{ + unsigned long sccr, sicrl, sicrh; + void __iomem *immap; + struct device_node *np = NULL; + int port0_is_dr = 0, port1_is_dr = 0; + const void *prop, *dr_mode; + + immap = ioremap(get_immrbase(), 0x1000); + if (!immap) + return -ENOMEM; + + /* Read registers */ + /* Note: DR and MPH must use the same clock setting in SCCR */ + sccr = in_be32(immap + MPC83XX_SCCR_OFFS) & ~MPC83XX_SCCR_USB_MASK; + sicrl = in_be32(immap + MPC83XX_SICRL_OFFS) & ~MPC834X_SICRL_USB_MASK; + sicrh = in_be32(immap + MPC83XX_SICRH_OFFS) & ~MPC834X_SICRH_USB_UTMI; + + np = of_find_compatible_node(NULL, "usb", "fsl-usb2-dr"); + if (np) { + sccr |= MPC83XX_SCCR_USB_DRCM_11; /* 1:3 */ + + prop = of_get_property(np, "phy_type", NULL); + if (prop && (!strcmp(prop, "utmi") || + !strcmp(prop, "utmi_wide"))) { + sicrl |= MPC834X_SICRL_USB0 | MPC834X_SICRL_USB1; + sicrh |= MPC834X_SICRH_USB_UTMI; + port1_is_dr = 1; + } else if (prop && !strcmp(prop, "serial")) { + dr_mode = of_get_property(np, "dr_mode", NULL); + if (dr_mode && !strcmp(dr_mode, "otg")) { + sicrl |= MPC834X_SICRL_USB0 | MPC834X_SICRL_USB1; + port1_is_dr = 1; + } else { + sicrl |= MPC834X_SICRL_USB0; + } + } else if (prop && !strcmp(prop, "ulpi")) { + sicrl |= MPC834X_SICRL_USB0; + } else { + printk(KERN_WARNING "834x USB PHY type not supported\n"); + } + port0_is_dr = 1; + of_node_put(np); + } + np = of_find_compatible_node(NULL, "usb", "fsl-usb2-mph"); + if (np) { + sccr |= MPC83XX_SCCR_USB_MPHCM_11; /* 1:3 */ + + prop = of_get_property(np, "port0", NULL); + if (prop) { + if (port0_is_dr) + printk(KERN_WARNING + "834x USB port0 can't be used by both DR and MPH!\n"); + sicrl |= MPC834X_SICRL_USB0; + } + prop = of_get_property(np, "port1", NULL); + if (prop) { + if (port1_is_dr) + printk(KERN_WARNING + "834x USB port1 can't be used by both DR and MPH!\n"); + sicrl |= MPC834X_SICRL_USB1; + } + of_node_put(np); + } + + /* Write back */ + out_be32(immap + MPC83XX_SCCR_OFFS, sccr); + out_be32(immap + MPC83XX_SICRL_OFFS, sicrl); + out_be32(immap + MPC83XX_SICRH_OFFS, sicrh); + + iounmap(immap); + return 0; +} +#endif /* CONFIG_MPC834x */ + +#ifdef CONFIG_PPC_MPC831x +int mpc831x_usb_cfg(void) +{ + u32 temp; + void __iomem *immap, *usb_regs; + struct device_node *np = NULL; + const void *prop; + struct resource res; + int ret = 0; +#ifdef CONFIG_USB_OTG + const void *dr_mode; +#endif + + np = of_find_compatible_node(NULL, "usb", "fsl-usb2-dr"); + if (!np) + return -ENODEV; + prop = of_get_property(np, "phy_type", NULL); + + /* Map IMMR space for pin and clock settings */ + immap = ioremap(get_immrbase(), 0x1000); + if (!immap) { + of_node_put(np); + return -ENOMEM; + } + + /* Configure clock */ + temp = in_be32(immap + MPC83XX_SCCR_OFFS); + temp &= ~MPC83XX_SCCR_USB_MASK; + temp |= MPC83XX_SCCR_USB_DRCM_11; /* 1:3 */ + out_be32(immap + MPC83XX_SCCR_OFFS, temp); + + /* Configure pin mux for ULPI. There is no pin mux for UTMI */ + if (!strcmp(prop, "ulpi")) { + temp = in_be32(immap + MPC83XX_SICRL_OFFS); + temp &= ~MPC831X_SICRL_USB_MASK; + temp |= MPC831X_SICRL_USB_ULPI; + out_be32(immap + MPC83XX_SICRL_OFFS, temp); + + temp = in_be32(immap + MPC83XX_SICRH_OFFS); + temp &= ~MPC831X_SICRH_USB_MASK; + temp |= MPC831X_SICRH_USB_ULPI; + out_be32(immap + MPC83XX_SICRH_OFFS, temp); + } + + iounmap(immap); + + /* Map USB SOC space */ + ret = of_address_to_resource(np, 0, &res); + if (ret) { + of_node_put(np); + return ret; + } + usb_regs = ioremap(res.start, res.end - res.start + 1); + + /* Using on-chip PHY */ + if (!strcmp(prop, "utmi_wide") || + !strcmp(prop, "utmi")) { + /* Set UTMI_PHY_EN, REFSEL to 48MHZ */ + out_be32(usb_regs + FSL_USB2_CONTROL_OFFS, + CONTROL_UTMI_PHY_EN | CONTROL_REFSEL_48MHZ); + /* Using external UPLI PHY */ + } else if (!strcmp(prop, "ulpi")) { + /* Set PHY_CLK_SEL to ULPI */ + temp = CONTROL_PHY_CLK_SEL_ULPI; +#ifdef CONFIG_USB_OTG + /* Set OTG_PORT */ + dr_mode = of_get_property(np, "dr_mode", NULL); + if (dr_mode && !strcmp(dr_mode, "otg")) + temp |= CONTROL_OTG_PORT; +#endif /* CONFIG_USB_OTG */ + out_be32(usb_regs + FSL_USB2_CONTROL_OFFS, temp); + } else { + printk(KERN_WARNING "831x USB PHY type not supported\n"); + ret = -EINVAL; + } + + iounmap(usb_regs); + of_node_put(np); + return ret; +} +#endif /* CONFIG_PPC_MPC831x */ |
