diff options
Diffstat (limited to 'arch/powerpc/platforms')
| -rw-r--r-- | arch/powerpc/platforms/chrp/gg2.h | 61 | ||||
| -rw-r--r-- | arch/powerpc/platforms/chrp/pci.c | 2 | ||||
| -rw-r--r-- | arch/powerpc/platforms/chrp/setup.c | 2 | ||||
| -rw-r--r-- | arch/powerpc/platforms/embedded6xx/linkstation.c | 3 | ||||
| -rw-r--r-- | arch/powerpc/platforms/embedded6xx/ls_uart.c | 3 | ||||
| -rw-r--r-- | arch/powerpc/platforms/embedded6xx/mpc10x.h | 180 |
6 files changed, 247 insertions, 4 deletions
diff --git a/arch/powerpc/platforms/chrp/gg2.h b/arch/powerpc/platforms/chrp/gg2.h new file mode 100644 index 000000000000..341ae55b99fb --- /dev/null +++ b/arch/powerpc/platforms/chrp/gg2.h @@ -0,0 +1,61 @@ +/* + * include/asm-ppc/gg2.h -- VLSI VAS96011/12 `Golden Gate 2' register definitions + * + * Copyright (C) 1997 Geert Uytterhoeven + * + * This file is based on the following documentation: + * + * The VAS96011/12 Chipset, Data Book, Edition 1.0 + * VLSI Technology, Inc. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive + * for more details. + */ + +#ifndef _ASMPPC_GG2_H +#define _ASMPPC_GG2_H + + /* + * Memory Map (CHRP mode) + */ + +#define GG2_PCI_MEM_BASE 0xc0000000 /* Peripheral memory space */ +#define GG2_ISA_MEM_BASE 0xf7000000 /* Peripheral memory alias */ +#define GG2_ISA_IO_BASE 0xf8000000 /* Peripheral I/O space */ +#define GG2_PCI_CONFIG_BASE 0xfec00000 /* PCI configuration space */ +#define GG2_INT_ACK_SPECIAL 0xfec80000 /* Interrupt acknowledge and */ + /* special PCI cycles */ +#define GG2_ROM_BASE0 0xff000000 /* ROM bank 0 */ +#define GG2_ROM_BASE1 0xff800000 /* ROM bank 1 */ + + + /* + * GG2 specific PCI Registers + */ + +extern void __iomem *gg2_pci_config_base; /* kernel virtual address */ + +#define GG2_PCI_BUSNO 0x40 /* Bus number */ +#define GG2_PCI_SUBBUSNO 0x41 /* Subordinate bus number */ +#define GG2_PCI_DISCCTR 0x42 /* Disconnect counter */ +#define GG2_PCI_PPC_CTRL 0x50 /* PowerPC interface control register */ +#define GG2_PCI_ADDR_MAP 0x5c /* Address map */ +#define GG2_PCI_PCI_CTRL 0x60 /* PCI interface control register */ +#define GG2_PCI_ROM_CTRL 0x70 /* ROM interface control register */ +#define GG2_PCI_ROM_TIME 0x74 /* ROM timing */ +#define GG2_PCI_CC_CTRL 0x80 /* Cache controller control register */ +#define GG2_PCI_DRAM_BANK0 0x90 /* Control register for DRAM bank #0 */ +#define GG2_PCI_DRAM_BANK1 0x94 /* Control register for DRAM bank #1 */ +#define GG2_PCI_DRAM_BANK2 0x98 /* Control register for DRAM bank #2 */ +#define GG2_PCI_DRAM_BANK3 0x9c /* Control register for DRAM bank #3 */ +#define GG2_PCI_DRAM_BANK4 0xa0 /* Control register for DRAM bank #4 */ +#define GG2_PCI_DRAM_BANK5 0xa4 /* Control register for DRAM bank #5 */ +#define GG2_PCI_DRAM_TIME0 0xb0 /* Timing parameters set #0 */ +#define GG2_PCI_DRAM_TIME1 0xb4 /* Timing parameters set #1 */ +#define GG2_PCI_DRAM_CTRL 0xc0 /* DRAM control */ +#define GG2_PCI_ERR_CTRL 0xd0 /* Error control register */ +#define GG2_PCI_ERR_STATUS 0xd4 /* Error status register */ + /* Cleared when read */ + +#endif /* _ASMPPC_GG2_H */ diff --git a/arch/powerpc/platforms/chrp/pci.c b/arch/powerpc/platforms/chrp/pci.c index 974952ed15cb..e43465d34d29 100644 --- a/arch/powerpc/platforms/chrp/pci.c +++ b/arch/powerpc/platforms/chrp/pci.c @@ -13,7 +13,6 @@ #include <asm/irq.h> #include <asm/hydra.h> #include <asm/prom.h> -#include <asm/gg2.h> #include <asm/machdep.h> #include <asm/sections.h> #include <asm/pci-bridge.h> @@ -21,6 +20,7 @@ #include <asm/rtas.h> #include "chrp.h" +#include "gg2.h" /* LongTrail */ void __iomem *gg2_pci_config_base; diff --git a/arch/powerpc/platforms/chrp/setup.c b/arch/powerpc/platforms/chrp/setup.c index dde5ef4dde35..96498ad7b943 100644 --- a/arch/powerpc/platforms/chrp/setup.c +++ b/arch/powerpc/platforms/chrp/setup.c @@ -37,7 +37,6 @@ #include <asm/io.h> #include <asm/pgtable.h> #include <asm/prom.h> -#include <asm/gg2.h> #include <asm/pci-bridge.h> #include <asm/dma.h> #include <asm/machdep.h> @@ -51,6 +50,7 @@ #include <asm/xmon.h> #include "chrp.h" +#include "gg2.h" void rtas_indicator_progress(char *, unsigned short); diff --git a/arch/powerpc/platforms/embedded6xx/linkstation.c b/arch/powerpc/platforms/embedded6xx/linkstation.c index 8c60e0207d02..61ca02c2d644 100644 --- a/arch/powerpc/platforms/embedded6xx/linkstation.c +++ b/arch/powerpc/platforms/embedded6xx/linkstation.c @@ -18,9 +18,10 @@ #include <asm/time.h> #include <asm/prom.h> #include <asm/mpic.h> -#include <asm/mpc10x.h> #include <asm/pci-bridge.h> +#include "mpc10x.h" + static struct mtd_partition linkstation_physmap_partitions[] = { { .name = "mtd_firmimg", diff --git a/arch/powerpc/platforms/embedded6xx/ls_uart.c b/arch/powerpc/platforms/embedded6xx/ls_uart.c index f7a4def5eff4..0d9f1500a671 100644 --- a/arch/powerpc/platforms/embedded6xx/ls_uart.c +++ b/arch/powerpc/platforms/embedded6xx/ls_uart.c @@ -4,10 +4,11 @@ #include <linux/serial_reg.h> #include <linux/serial_8250.h> #include <asm/io.h> -#include <asm/mpc10x.h> #include <asm/prom.h> #include <asm/termbits.h> +#include "mpc10x.h" + static void __iomem *avr_addr; static unsigned long avr_clock; diff --git a/arch/powerpc/platforms/embedded6xx/mpc10x.h b/arch/powerpc/platforms/embedded6xx/mpc10x.h new file mode 100644 index 000000000000..b30a6a3b5bd2 --- /dev/null +++ b/arch/powerpc/platforms/embedded6xx/mpc10x.h @@ -0,0 +1,180 @@ +/* + * Common routines for the Motorola SPS MPC106/8240/107 Host bridge/Mem + * ctlr/EPIC/etc. + * + * Author: Mark A. Greer + * mgreer@mvista.com + * + * 2001 (c) MontaVista, Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ +#ifndef __PPC_KERNEL_MPC10X_H +#define __PPC_KERNEL_MPC10X_H + +#include <linux/pci_ids.h> +#include <asm/pci-bridge.h> + +/* + * The values here don't completely map everything but should work in most + * cases. + * + * MAP A (PReP Map) + * Processor: 0x80000000 - 0x807fffff -> PCI I/O: 0x00000000 - 0x007fffff + * Processor: 0xc0000000 - 0xdfffffff -> PCI MEM: 0x00000000 - 0x1fffffff + * PCI MEM: 0x80000000 -> Processor System Memory: 0x00000000 + * EUMB mapped to: ioremap_base - 0x00100000 (ioremap_base - 1 MB) + * + * MAP B (CHRP Map) + * Processor: 0xfe000000 - 0xfebfffff -> PCI I/O: 0x00000000 - 0x00bfffff + * Processor: 0x80000000 - 0xbfffffff -> PCI MEM: 0x80000000 - 0xbfffffff + * PCI MEM: 0x00000000 -> Processor System Memory: 0x00000000 + * EUMB mapped to: ioremap_base - 0x00100000 (ioremap_base - 1 MB) + */ + +/* + * Define the vendor/device IDs for the various bridges--should be added to + * <linux/pci_ids.h> + */ +#define MPC10X_BRIDGE_106 ((PCI_DEVICE_ID_MOTOROLA_MPC106 << 16) | \ + PCI_VENDOR_ID_MOTOROLA) +#define MPC10X_BRIDGE_8240 ((0x0003 << 16) | PCI_VENDOR_ID_MOTOROLA) +#define MPC10X_BRIDGE_107 ((0x0004 << 16) | PCI_VENDOR_ID_MOTOROLA) +#define MPC10X_BRIDGE_8245 ((0x0006 << 16) | PCI_VENDOR_ID_MOTOROLA) + +/* Define the type of map to use */ +#define MPC10X_MEM_MAP_A 1 +#define MPC10X_MEM_MAP_B 2 + +/* Map A (PReP Map) Defines */ +#define MPC10X_MAPA_CNFG_ADDR 0x80000cf8 +#define MPC10X_MAPA_CNFG_DATA 0x80000cfc + +#define MPC10X_MAPA_ISA_IO_BASE 0x80000000 +#define MPC10X_MAPA_ISA_MEM_BASE 0xc0000000 +#define MPC10X_MAPA_DRAM_OFFSET 0x80000000 + +#define MPC10X_MAPA_PCI_INTACK_ADDR 0xbffffff0 +#define MPC10X_MAPA_PCI_IO_START 0x00000000 +#define MPC10X_MAPA_PCI_IO_END (0x00800000 - 1) +#define MPC10X_MAPA_PCI_MEM_START 0x00000000 +#define MPC10X_MAPA_PCI_MEM_END (0x20000000 - 1) + +#define MPC10X_MAPA_PCI_MEM_OFFSET (MPC10X_MAPA_ISA_MEM_BASE - \ + MPC10X_MAPA_PCI_MEM_START) + +/* Map B (CHRP Map) Defines */ +#define MPC10X_MAPB_CNFG_ADDR 0xfec00000 +#define MPC10X_MAPB_CNFG_DATA 0xfee00000 + +#define MPC10X_MAPB_ISA_IO_BASE 0xfe000000 +#define MPC10X_MAPB_ISA_MEM_BASE 0x80000000 +#define MPC10X_MAPB_DRAM_OFFSET 0x00000000 + +#define MPC10X_MAPB_PCI_INTACK_ADDR 0xfef00000 +#define MPC10X_MAPB_PCI_IO_START 0x00000000 +#define MPC10X_MAPB_PCI_IO_END (0x00c00000 - 1) +#define MPC10X_MAPB_PCI_MEM_START 0x80000000 +#define MPC10X_MAPB_PCI_MEM_END (0xc0000000 - 1) + +#define MPC10X_MAPB_PCI_MEM_OFFSET (MPC10X_MAPB_ISA_MEM_BASE - \ + MPC10X_MAPB_PCI_MEM_START) + +/* Set hose members to values appropriate for the mem map used */ +#define MPC10X_SETUP_HOSE(hose, map) { \ + (hose)->pci_mem_offset = MPC10X_MAP##map##_PCI_MEM_OFFSET; \ + (hose)->io_space.start = MPC10X_MAP##map##_PCI_IO_START; \ + (hose)->io_space.end = MPC10X_MAP##map##_PCI_IO_END; \ + (hose)->mem_space.start = MPC10X_MAP##map##_PCI_MEM_START; \ + (hose)->mem_space.end = MPC10X_MAP##map##_PCI_MEM_END; \ + (hose)->io_base_virt = (void *)MPC10X_MAP##map##_ISA_IO_BASE; \ +} + + +/* Miscellaneous Configuration register offsets */ +#define MPC10X_CFG_PIR_REG 0x09 +#define MPC10X_CFG_PIR_HOST_BRIDGE 0x00 +#define MPC10X_CFG_PIR_AGENT 0x01 + +#define MPC10X_CFG_EUMBBAR 0x78 + +#define MPC10X_CFG_PICR1_REG 0xa8 +#define MPC10X_CFG_PICR1_ADDR_MAP_MASK 0x00010000 +#define MPC10X_CFG_PICR1_ADDR_MAP_A 0x00010000 +#define MPC10X_CFG_PICR1_ADDR_MAP_B 0x00000000 +#define MPC10X_CFG_PICR1_SPEC_PCI_RD 0x00000004 +#define MPC10X_CFG_PICR1_ST_GATH_EN 0x00000040 + +#define MPC10X_CFG_PICR2_REG 0xac +#define MPC10X_CFG_PICR2_COPYBACK_OPT 0x00000001 + +#define MPC10X_CFG_MAPB_OPTIONS_REG 0xe0 +#define MPC10X_CFG_MAPB_OPTIONS_CFAE 0x80 /* CPU_FD_ALIAS_EN */ +#define MPC10X_CFG_MAPB_OPTIONS_PFAE 0x40 /* PCI_FD_ALIAS_EN */ +#define MPC10X_CFG_MAPB_OPTIONS_DR 0x20 /* DLL_RESET */ +#define MPC10X_CFG_MAPB_OPTIONS_PCICH 0x08 /* PCI_COMPATIBILITY_HOLE */ +#define MPC10X_CFG_MAPB_OPTIONS_PROCCH 0x04 /* PROC_COMPATIBILITY_HOLE */ + +/* Define offsets for the memory controller registers in the config space */ +#define MPC10X_MCTLR_MEM_START_1 0x80 /* Banks 0-3 */ +#define MPC10X_MCTLR_MEM_START_2 0x84 /* Banks 4-7 */ +#define MPC10X_MCTLR_EXT_MEM_START_1 0x88 /* Banks 0-3 */ +#define MPC10X_MCTLR_EXT_MEM_START_2 0x8c /* Banks 4-7 */ + +#define MPC10X_MCTLR_MEM_END_1 0x90 /* Banks 0-3 */ +#define MPC10X_MCTLR_MEM_END_2 0x94 /* Banks 4-7 */ +#define MPC10X_MCTLR_EXT_MEM_END_1 0x98 /* Banks 0-3 */ +#define MPC10X_MCTLR_EXT_MEM_END_2 0x9c /* Banks 4-7 */ + +#define MPC10X_MCTLR_MEM_BANK_ENABLES 0xa0 + +/* Define some offset in the EUMB */ +#define MPC10X_EUMB_SIZE 0x00100000 /* Total EUMB size (1MB) */ + +#define MPC10X_EUMB_MU_OFFSET 0x00000000 /* Msg Unit reg offset */ +#define MPC10X_EUMB_MU_SIZE 0x00001000 /* Msg Unit reg size */ +#define MPC10X_EUMB_DMA_OFFSET 0x00001000 /* DMA Unit reg offset */ +#define MPC10X_EUMB_DMA_SIZE 0x00001000 /* DMA Unit reg size */ +#define MPC10X_EUMB_ATU_OFFSET 0x00002000 /* Addr xlate reg offset */ +#define MPC10X_EUMB_ATU_SIZE 0x00001000 /* Addr xlate reg size */ +#define MPC10X_EUMB_I2C_OFFSET 0x00003000 /* I2C Unit reg offset */ +#define MPC10X_EUMB_I2C_SIZE 0x00001000 /* I2C Unit reg size */ +#define MPC10X_EUMB_DUART_OFFSET 0x00004000 /* DUART Unit reg offset (8245) */ +#define MPC10X_EUMB_DUART_SIZE 0x00001000 /* DUART Unit reg size (8245) */ +#define MPC10X_EUMB_EPIC_OFFSET 0x00040000 /* EPIC offset in EUMB */ +#define MPC10X_EUMB_EPIC_SIZE 0x00030000 /* EPIC size */ +#define MPC10X_EUMB_PM_OFFSET 0x000fe000 /* Performance Monitor reg offset (8245) */ +#define MPC10X_EUMB_PM_SIZE 0x00001000 /* Performance Monitor reg size (8245) */ +#define MPC10X_EUMB_WP_OFFSET 0x000ff000 /* Data path diagnostic, watchpoint reg offset */ +#define MPC10X_EUMB_WP_SIZE 0x00001000 /* Data path diagnostic, watchpoint reg size */ + +/* + * Define some recommended places to put the EUMB regs. + * For both maps, recommend putting the EUMB from 0xeff00000 to 0xefffffff. + */ +extern unsigned long ioremap_base; +#define MPC10X_MAPA_EUMB_BASE (ioremap_base - MPC10X_EUMB_SIZE) +#define MPC10X_MAPB_EUMB_BASE MPC10X_MAPA_EUMB_BASE + +enum ppc_sys_devices { + MPC10X_IIC1, + MPC10X_DMA0, + MPC10X_DMA1, + MPC10X_UART0, + MPC10X_UART1, + NUM_PPC_SYS_DEVS, +}; + +int mpc10x_bridge_init(struct pci_controller *hose, + uint current_map, + uint new_map, + uint phys_eumb_base); +unsigned long mpc10x_get_mem_size(uint mem_map); +int mpc10x_enable_store_gathering(struct pci_controller *hose); +int mpc10x_disable_store_gathering(struct pci_controller *hose); + +/* For MPC107 boards that use the built-in openpic */ +void mpc10x_set_openpic(void); + +#endif /* __PPC_KERNEL_MPC10X_H */ |
