diff options
Diffstat (limited to 'arch/powerpc/platforms/cell')
-rw-r--r-- | arch/powerpc/platforms/cell/interrupt.c | 396 | ||||
-rw-r--r-- | arch/powerpc/platforms/cell/interrupt.h | 17 | ||||
-rw-r--r-- | arch/powerpc/platforms/cell/setup.c | 13 | ||||
-rw-r--r-- | arch/powerpc/platforms/cell/spider-pic.c | 341 | ||||
-rw-r--r-- | arch/powerpc/platforms/cell/spu_base.c | 119 |
5 files changed, 512 insertions, 374 deletions
diff --git a/arch/powerpc/platforms/cell/interrupt.c b/arch/powerpc/platforms/cell/interrupt.c index 97936f547f19..9d5da7896892 100644 --- a/arch/powerpc/platforms/cell/interrupt.c +++ b/arch/powerpc/platforms/cell/interrupt.c @@ -1,6 +1,9 @@ /* * Cell Internal Interrupt Controller * + * Copyright (C) 2006 Benjamin Herrenschmidt (benh@kernel.crashing.org) + * IBM, Corp. + * * (C) Copyright IBM Deutschland Entwicklung GmbH 2005 * * Author: Arnd Bergmann <arndb@de.ibm.com> @@ -25,11 +28,13 @@ #include <linux/module.h> #include <linux/percpu.h> #include <linux/types.h> +#include <linux/ioport.h> #include <asm/io.h> #include <asm/pgtable.h> #include <asm/prom.h> #include <asm/ptrace.h> +#include <asm/machdep.h> #include "interrupt.h" #include "cbe_regs.h" @@ -39,9 +44,25 @@ struct iic { u8 target_id; u8 eoi_stack[16]; int eoi_ptr; + struct irq_host *host; }; static DEFINE_PER_CPU(struct iic, iic); +#define IIC_NODE_COUNT 2 +static struct irq_host *iic_hosts[IIC_NODE_COUNT]; + +/* Convert between "pending" bits and hw irq number */ +static irq_hw_number_t iic_pending_to_hwnum(struct cbe_iic_pending_bits bits) +{ + unsigned char unit = bits.source & 0xf; + + if (bits.flags & CBE_IIC_IRQ_IPI) + return IIC_IRQ_IPI0 | (bits.prio >> 4); + else if (bits.class <= 3) + return (bits.class << 4) | unit; + else + return IIC_IRQ_INVALID; +} static void iic_mask(unsigned int irq) { @@ -65,197 +86,21 @@ static struct irq_chip iic_chip = { .eoi = iic_eoi, }; -/* XXX All of this has to be reworked completely. We need to assign a real - * interrupt numbers to the external interrupts and remove all the hard coded - * interrupt maps (rely on the device-tree whenever possible). - * - * Basically, my scheme is to define the "pendings" bits to be the HW interrupt - * number (ignoring the data and flags here). That means we can sort-of split - * external sources based on priority, and we can use request_irq() on pretty - * much anything. - * - * For spider or axon, they have their own interrupt space. spider will just have - * local "hardward" interrupts 0...xx * node stride. The node stride is not - * necessary (separate interrupt chips will have separate HW number space), but - * will allow to be compatible with existing device-trees. - * - * All of thise little world will get a standard remapping scheme to map those HW - * numbers into the linux flat irq number space. -*/ -static int iic_external_get_irq(struct cbe_iic_pending_bits pending) -{ - int irq; - unsigned char node, unit; - - node = pending.source >> 4; - unit = pending.source & 0xf; - irq = -1; - - /* - * This mapping is specific to the Cell Broadband - * Engine. We might need to get the numbers - * from the device tree to support future CPUs. - */ - switch (unit) { - case 0x00: - case 0x0b: - /* - * One of these units can be connected - * to an external interrupt controller. - */ - if (pending.class != 2) - break; - /* TODO: We might want to silently ignore cascade interrupts - * when no cascade handler exist yet - */ - irq = IIC_EXT_CASCADE + node * IIC_NODE_STRIDE; - break; - case 0x01 ... 0x04: - case 0x07 ... 0x0a: - /* - * These units are connected to the SPEs - */ - if (pending.class > 2) - break; - irq = IIC_SPE_OFFSET - + pending.class * IIC_CLASS_STRIDE - + node * IIC_NODE_STRIDE - + unit; - break; - } - if (irq == -1) - printk(KERN_WARNING "Unexpected interrupt class %02x, " - "source %02x, prio %02x, cpu %02x\n", pending.class, - pending.source, pending.prio, smp_processor_id()); - return irq; -} - /* Get an IRQ number from the pending state register of the IIC */ -int iic_get_irq(struct pt_regs *regs) -{ - struct iic *iic; - int irq; - struct cbe_iic_pending_bits pending; - - iic = &__get_cpu_var(iic); - *(unsigned long *) &pending = - in_be64((unsigned long __iomem *) &iic->regs->pending_destr); - iic->eoi_stack[++iic->eoi_ptr] = pending.prio; - BUG_ON(iic->eoi_ptr > 15); - - irq = -1; - if (pending.flags & CBE_IIC_IRQ_VALID) { - if (pending.flags & CBE_IIC_IRQ_IPI) { - irq = IIC_IPI_OFFSET + (pending.prio >> 4); -/* - if (irq > 0x80) - printk(KERN_WARNING "Unexpected IPI prio %02x" - "on CPU %02x\n", pending.prio, - smp_processor_id()); -*/ - } else { - irq = iic_external_get_irq(pending); - } - } - return irq; -} - -/* hardcoded part to be compatible with older firmware */ - -static int __init setup_iic_hardcoded(void) -{ - struct device_node *np; - int nodeid, cpu; - unsigned long regs; - struct iic *iic; - - for_each_possible_cpu(cpu) { - iic = &per_cpu(iic, cpu); - nodeid = cpu/2; - - for (np = of_find_node_by_type(NULL, "cpu"); - np; - np = of_find_node_by_type(np, "cpu")) { - if (nodeid == *(int *)get_property(np, "node-id", NULL)) - break; - } - - if (!np) { - printk(KERN_WARNING "IIC: CPU %d not found\n", cpu); - iic->regs = NULL; - iic->target_id = 0xff; - return -ENODEV; - } - - regs = *(long *)get_property(np, "iic", NULL); - - /* hack until we have decided on the devtree info */ - regs += 0x400; - if (cpu & 1) - regs += 0x20; - - printk(KERN_INFO "IIC for CPU %d at %lx\n", cpu, regs); - iic->regs = ioremap(regs, sizeof(struct cbe_iic_thread_regs)); - iic->target_id = (nodeid << 4) + ((cpu & 1) ? 0xf : 0xe); - iic->eoi_stack[0] = 0xff; - } - - return 0; -} - -static int __init setup_iic(void) +static unsigned int iic_get_irq(struct pt_regs *regs) { - struct device_node *dn; - unsigned long *regs; - char *compatible; - unsigned *np, found = 0; - struct iic *iic = NULL; - - for (dn = NULL; (dn = of_find_node_by_name(dn, "interrupt-controller"));) { - compatible = (char *)get_property(dn, "compatible", NULL); - - if (!compatible) { - printk(KERN_WARNING "no compatible property found !\n"); - continue; - } - - if (strstr(compatible, "IBM,CBEA-Internal-Interrupt-Controller")) - regs = (unsigned long *)get_property(dn,"reg", NULL); - else - continue; - - if (!regs) - printk(KERN_WARNING "IIC: no reg property\n"); - - np = (unsigned int *)get_property(dn, "ibm,interrupt-server-ranges", NULL); - - if (!np) { - printk(KERN_WARNING "IIC: CPU association not found\n"); - iic->regs = NULL; - iic->target_id = 0xff; - return -ENODEV; - } - - iic = &per_cpu(iic, np[0]); - iic->regs = ioremap(regs[0], sizeof(struct cbe_iic_thread_regs)); - iic->target_id = ((np[0] & 2) << 3) + ((np[0] & 1) ? 0xf : 0xe); - iic->eoi_stack[0] = 0xff; - printk("IIC for CPU %d at %lx mapped to %p\n", np[0], regs[0], iic->regs); - - iic = &per_cpu(iic, np[1]); - iic->regs = ioremap(regs[2], sizeof(struct cbe_iic_thread_regs)); - iic->target_id = ((np[1] & 2) << 3) + ((np[1] & 1) ? 0xf : 0xe); - iic->eoi_stack[0] = 0xff; - - printk("IIC for CPU %d at %lx mapped to %p\n", np[1], regs[2], iic->regs); - - found++; - } - - if (found) - return 0; - else - return -ENODEV; + struct cbe_iic_pending_bits pending; + struct iic *iic; + + iic = &__get_cpu_var(iic); + *(unsigned long *) &pending = + in_be64((unsigned long __iomem *) &iic->regs->pending_destr); + iic->eoi_stack[++iic->eoi_ptr] = pending.prio; + BUG_ON(iic->eoi_ptr > 15); + if (pending.flags & CBE_IIC_IRQ_VALID) + return irq_linear_revmap(iic->host, + iic_pending_to_hwnum(pending)); + return NO_IRQ; } #ifdef CONFIG_SMP @@ -263,12 +108,12 @@ static int __init setup_iic(void) /* Use the highest interrupt priorities for IPI */ static inline int iic_ipi_to_irq(int ipi) { - return IIC_IPI_OFFSET + IIC_NUM_IPIS - 1 - ipi; + return IIC_IRQ_IPI0 + IIC_NUM_IPIS - 1 - ipi; } static inline int iic_irq_to_ipi(int irq) { - return IIC_NUM_IPIS - 1 - (irq - IIC_IPI_OFFSET); + return IIC_NUM_IPIS - 1 - (irq - IIC_IRQ_IPI0); } void iic_setup_cpu(void) @@ -287,22 +132,51 @@ u8 iic_get_target_id(int cpu) } EXPORT_SYMBOL_GPL(iic_get_target_id); +struct irq_host *iic_get_irq_host(int node) +{ + if (node < 0 || node >= IIC_NODE_COUNT) + return NULL; + return iic_hosts[node]; +} +EXPORT_SYMBOL_GPL(iic_get_irq_host); + + static irqreturn_t iic_ipi_action(int irq, void *dev_id, struct pt_regs *regs) { - smp_message_recv(iic_irq_to_ipi(irq), regs); + int ipi = (int)(long)dev_id; + + smp_message_recv(ipi, regs); + return IRQ_HANDLED; } static void iic_request_ipi(int ipi, const char *name) { - int irq; + int node, virq; - irq = iic_ipi_to_irq(ipi); - - /* IPIs are marked IRQF_DISABLED as they must run with irqs - * disabled */ - set_irq_chip_and_handler(irq, &iic_chip, handle_percpu_irq); - request_irq(irq, iic_ipi_action, IRQF_DISABLED, name, NULL); + for (node = 0; node < IIC_NODE_COUNT; node++) { + char *rname; + if (iic_hosts[node] == NULL) + continue; + virq = irq_create_mapping(iic_hosts[node], + iic_ipi_to_irq(ipi), 0); + if (virq == NO_IRQ) { + printk(KERN_ERR + "iic: failed to map IPI %s on node %d\n", + name, node); + continue; + } + rname = kzalloc(strlen(name) + 16, GFP_KERNEL); + if (rname) + sprintf(rname, "%s node %d", name, node); + else + rname = (char *)name; + if (request_irq(virq, iic_ipi_action, IRQF_DISABLED, + rname, (void *)(long)ipi)) + printk(KERN_ERR + "iic: failed to request IPI %s on node %d\n", + name, node); + } } void iic_request_IPIs(void) @@ -313,41 +187,119 @@ void iic_request_IPIs(void) iic_request_ipi(PPC_MSG_DEBUGGER_BREAK, "IPI-debug"); #endif /* CONFIG_DEBUGGER */ } + #endif /* CONFIG_SMP */ -static void __init iic_setup_builtin_handlers(void) + +static int iic_host_match(struct irq_host *h, struct device_node *node) +{ + return h->host_data != NULL && node == h->host_data; +} + +static int iic_host_map(struct irq_host *h, unsigned int virq, + irq_hw_number_t hw, unsigned int flags) +{ + if (hw < IIC_IRQ_IPI0) + set_irq_chip_and_handler(virq, &iic_chip, handle_fasteoi_irq); + else + set_irq_chip_and_handler(virq, &iic_chip, handle_percpu_irq); + return 0; +} + +static int iic_host_xlate(struct irq_host *h, struct device_node *ct, + u32 *intspec, unsigned int intsize, + irq_hw_number_t *out_hwirq, unsigned int *out_flags) + { - int be, isrc; + /* Currently, we don't translate anything. That needs to be fixed as + * we get better defined device-trees. iic interrupts have to be + * explicitely mapped by whoever needs them + */ + return -ENODEV; +} + +static struct irq_host_ops iic_host_ops = { + .match = iic_host_match, + .map = iic_host_map, + .xlate = iic_host_xlate, +}; + +static void __init init_one_iic(unsigned int hw_cpu, unsigned long addr, + struct irq_host *host) +{ + /* XXX FIXME: should locate the linux CPU number from the HW cpu + * number properly. We are lucky for now + */ + struct iic *iic = &per_cpu(iic, hw_cpu); - /* XXX FIXME: Assume two threads per BE are present */ - for (be=0; be < num_present_cpus() / 2; be++) { - int irq; + iic->regs = ioremap(addr, sizeof(struct cbe_iic_thread_regs)); + BUG_ON(iic->regs == NULL); - /* setup SPE chip and handlers */ - for (isrc = 0; isrc < IIC_CLASS_STRIDE * 3; isrc++) { - irq = IIC_NODE_STRIDE * be + IIC_SPE_OFFSET + isrc; - set_irq_chip_and_handler(irq, &iic_chip, handle_fasteoi_irq); + iic->target_id = ((hw_cpu & 2) << 3) | ((hw_cpu & 1) ? 0xf : 0xe); + iic->eoi_stack[0] = 0xff; + iic->host = host; + out_be64(&iic->regs->prio, 0); + + printk(KERN_INFO "IIC for CPU %d at %lx mapped to %p, target id 0x%x\n", + hw_cpu, addr, iic->regs, iic->target_id); +} + +static int __init setup_iic(void) +{ + struct device_node *dn; + struct resource r0, r1; + struct irq_host *host; + int found = 0; + u32 *np; + + for (dn = NULL; + (dn = of_find_node_by_name(dn,"interrupt-controller")) != NULL;) { + if (!device_is_compatible(dn, + "IBM,CBEA-Internal-Interrupt-Controller")) + continue; + np = (u32 *)get_property(dn, "ibm,interrupt-server-ranges", + NULL); + if (np == NULL) { + printk(KERN_WARNING "IIC: CPU association not found\n"); + of_node_put(dn); + return -ENODEV; } - /* setup cascade chip */ - irq = IIC_EXT_CASCADE + be * IIC_NODE_STRIDE; - set_irq_chip_and_handler(irq, &iic_chip, handle_fasteoi_irq); + if (of_address_to_resource(dn, 0, &r0) || + of_address_to_resource(dn, 1, &r1)) { + printk(KERN_WARNING "IIC: Can't resolve addresses\n"); + of_node_put(dn); + return -ENODEV; + } + host = NULL; + if (found < IIC_NODE_COUNT) { + host = irq_alloc_host(IRQ_HOST_MAP_LINEAR, + IIC_SOURCE_COUNT, + &iic_host_ops, + IIC_IRQ_INVALID); + iic_hosts[found] = host; + BUG_ON(iic_hosts[found] == NULL); + iic_hosts[found]->host_data = of_node_get(dn); + found++; + } + init_one_iic(np[0], r0.start, host); + init_one_iic(np[1], r1.start, host); } + + if (found) + return 0; + else + return -ENODEV; } void __init iic_init_IRQ(void) { - int cpu, irq_offset; - struct iic *iic; - + /* Discover and initialize iics */ if (setup_iic() < 0) - setup_iic_hardcoded(); + panic("IIC: Failed to initialize !\n"); - irq_offset = 0; - for_each_possible_cpu(cpu) { - iic = &per_cpu(iic, cpu); - if (iic->regs) - out_be64(&iic->regs->prio, 0xff); - } - iic_setup_builtin_handlers(); + /* Set master interrupt handling function */ + ppc_md.get_irq = iic_get_irq; + /* Enable on current CPU */ + iic_setup_cpu(); } diff --git a/arch/powerpc/platforms/cell/interrupt.h b/arch/powerpc/platforms/cell/interrupt.h index c74515aeb630..5560a92ec3ab 100644 --- a/arch/powerpc/platforms/cell/interrupt.h +++ b/arch/powerpc/platforms/cell/interrupt.h @@ -37,23 +37,22 @@ */ enum { - IIC_EXT_OFFSET = 0x00, /* Start of south bridge IRQs */ - IIC_EXT_CASCADE = 0x20, /* There is no interrupt 32 on spider */ - IIC_NUM_EXT = 0x40, /* Number of south bridge IRQs */ - IIC_SPE_OFFSET = 0x40, /* Start of SPE interrupts */ - IIC_CLASS_STRIDE = 0x10, /* SPE IRQs per class */ - IIC_IPI_OFFSET = 0x70, /* Start of IPI IRQs */ - IIC_NUM_IPIS = 0x10, /* IRQs reserved for IPI */ - IIC_NODE_STRIDE = 0x80, /* Total IRQs per node */ + IIC_IRQ_INVALID = 0xff, + IIC_IRQ_MAX = 0x3f, + IIC_IRQ_EXT_IOIF0 = 0x20, + IIC_IRQ_EXT_IOIF1 = 0x2b, + IIC_IRQ_IPI0 = 0x40, + IIC_NUM_IPIS = 0x10, /* IRQs reserved for IPI */ + IIC_SOURCE_COUNT = 0x50, }; extern void iic_init_IRQ(void); -extern int iic_get_irq(struct pt_regs *regs); extern void iic_cause_IPI(int cpu, int mesg); extern void iic_request_IPIs(void); extern void iic_setup_cpu(void); extern u8 iic_get_target_id(int cpu); +extern struct irq_host *iic_get_irq_host(int node); extern void spider_init_IRQ(void); diff --git a/arch/powerpc/platforms/cell/setup.c b/arch/powerpc/platforms/cell/setup.c index 70a4e903f7e2..282987d6d4a2 100644 --- a/arch/powerpc/platforms/cell/setup.c +++ b/arch/powerpc/platforms/cell/setup.c @@ -80,6 +80,14 @@ static void cell_progress(char *s, unsigned short hex) printk("*** %04x : %s\n", hex, s ? s : ""); } +static void __init cell_pcibios_fixup(void) +{ + struct pci_dev *dev = NULL; + + for_each_pci_dev(dev) + pci_read_irq_line(dev); +} + static void __init cell_init_irq(void) { iic_init_IRQ(); @@ -130,8 +138,6 @@ static void __init cell_init_early(void) cell_init_iommu(); - ppc64_interrupt_controller = IC_CELL_PIC; - DBG(" <- cell_init_early()\n"); } @@ -178,8 +184,7 @@ define_machine(cell) { .check_legacy_ioport = cell_check_legacy_ioport, .progress = cell_progress, .init_IRQ = cell_init_irq, - .get_irq = iic_get_irq, - + .pcibios_fixup = cell_pcibios_fixup, #ifdef CONFIG_KEXEC .machine_kexec = default_machine_kexec, .machine_kexec_prepare = default_machine_kexec_prepare, diff --git a/arch/powerpc/platforms/cell/spider-pic.c b/arch/powerpc/platforms/cell/spider-pic.c index 98425acb6cda..ae7ef88f1a37 100644 --- a/arch/powerpc/platforms/cell/spider-pic.c +++ b/arch/powerpc/platforms/cell/spider-pic.c @@ -22,6 +22,7 @@ #include <linux/interrupt.h> #include <linux/irq.h> +#include <linux/ioport.h> #include <asm/pgtable.h> #include <asm/prom.h> @@ -56,58 +57,67 @@ enum { REISWAITEN = 0x508, /* Reissue Wait Control*/ }; -static void __iomem *spider_pics[4]; +#define SPIDER_CHIP_COUNT 4 +#define SPIDER_SRC_COUNT 64 +#define SPIDER_IRQ_INVALID 63 -static void __iomem *spider_get_pic(int irq) -{ - int node = irq / IIC_NODE_STRIDE; - irq %= IIC_NODE_STRIDE; - - if (irq >= IIC_EXT_OFFSET && - irq < IIC_EXT_OFFSET + IIC_NUM_EXT && - spider_pics) - return spider_pics[node]; - return NULL; -} +struct spider_pic { + struct irq_host *host; + struct device_node *of_node; + void __iomem *regs; + unsigned int node_id; +}; +static struct spider_pic spider_pics[SPIDER_CHIP_COUNT]; -static int spider_get_nr(unsigned int irq) +static struct spider_pic *spider_virq_to_pic(unsigned int virq) { - return (irq % IIC_NODE_STRIDE) - IIC_EXT_OFFSET; + return irq_map[virq].host->host_data; } -static void __iomem *spider_get_irq_config(int irq) +static void __iomem *spider_get_irq_config(struct spider_pic *pic, + unsigned int src) { - void __iomem *pic; - pic = spider_get_pic(irq); - return pic + TIR_CFGA + 8 * spider_get_nr(irq); + return pic->regs + TIR_CFGA + 8 * src; } -static void spider_unmask_irq(unsigned int irq) +static void spider_unmask_irq(unsigned int virq) { - int nodeid = (irq / IIC_NODE_STRIDE) * 0x10; - void __iomem *cfg = spider_get_irq_config(irq); - irq = spider_get_nr(irq); + struct spider_pic *pic = spider_virq_to_pic(virq); + void __iomem *cfg = spider_get_irq_config(pic, irq_map[virq].hwirq); - /* FIXME: Most of that is configuration and has nothing to do with enabling/disable, - * besides, it's also partially bogus. + /* We use no locking as we should be covered by the descriptor lock + * for access to invidual source configuration registers */ - out_be32(cfg, (in_be32(cfg) & ~0xf0)| 0x3107000eu | nodeid); - out_be32(cfg + 4, in_be32(cfg + 4) | 0x00020000u | irq); + out_be32(cfg, in_be32(cfg) | 0x30000000u); } -static void spider_mask_irq(unsigned int irq) +static void spider_mask_irq(unsigned int virq) { - void __iomem *cfg = spider_get_irq_config(irq); - irq = spider_get_nr(irq); + struct spider_pic *pic = spider_virq_to_pic(virq); + void __iomem *cfg = spider_get_irq_config(pic, irq_map[virq].hwirq); + /* We use no locking as we should be covered by the descriptor lock + * for access to invidual source configuration registers + */ out_be32(cfg, in_be32(cfg) & ~0x30000000u); } -static void spider_ack_irq(unsigned int irq) +static void spider_ack_irq(unsigned int virq) { - /* Should reset edge detection logic but we don't configure any edge interrupt - * at the moment. + struct spider_pic *pic = spider_virq_to_pic(virq); + unsigned int src = irq_map[virq].hwirq; + + /* Reset edge detection logic if necessary */ + if (get_irq_desc(virq)->status & IRQ_LEVEL) + return; + + /* Only interrupts 47 to 50 can be set to edge */ + if (src < 47 || src > 50) + return; + + /* Perform the clear of the edge logic */ + out_be32(pic->regs + TIR_EDC, 0x100 | (src & 0xf)); } static struct irq_chip spider_pic = { @@ -117,102 +127,243 @@ static struct irq_chip spider_pic = { .ack = spider_ack_irq, }; -static int spider_get_irq(int node) +static int spider_host_match(struct irq_host *h, struct device_node *node) +{ + struct spider_pic *pic = h->host_data; + return node == pic->of_node; +} + +static int spider_host_map(struct irq_host *h, unsigned int virq, + irq_hw_number_t hw, unsigned int flags) { - unsigned long cs; - void __iomem *regs = spider_pics[node]; + unsigned int sense = flags & IRQ_TYPE_SENSE_MASK; + struct spider_pic *pic = h->host_data; + void __iomem *cfg = spider_get_irq_config(pic, hw); + int level = 0; + u32 ic; + + /* Note that only level high is supported for most interrupts */ + if (sense != IRQ_TYPE_NONE && sense != IRQ_TYPE_LEVEL_HIGH && + (hw < 47 || hw > 50)) + return -EINVAL; + + /* Decode sense type */ + switch(sense) { + case IRQ_TYPE_EDGE_RISING: + ic = 0x3; + break; + case IRQ_TYPE_EDGE_FALLING: + ic = 0x2; + break; + case IRQ_TYPE_LEVEL_LOW: + ic = 0x0; + level = 1; + break; + case IRQ_TYPE_LEVEL_HIGH: + case IRQ_TYPE_NONE: + ic = 0x1; + level = 1; + break; + default: + return -EINVAL; + } - cs = in_be32(regs + TIR_CS) >> 24; + /* Configure the source. One gross hack that was there before and + * that I've kept around is the priority to the BE which I set to + * be the same as the interrupt source number. I don't know wether + * that's supposed to make any kind of sense however, we'll have to + * decide that, but for now, I'm not changing the behaviour. + */ + out_be32(cfg, (ic << 24) | (0x7 << 16) | (pic->node_id << 4) | 0xe); + out_be32(cfg + 4, (0x2 << 16) | (hw & 0xff)); - if (cs == 63) - return -1; - else - return cs; + if (level) + get_irq_desc(virq)->status |= IRQ_LEVEL; + set_irq_chip_and_handler(virq, &spider_pic, handle_level_irq); + return 0; +} + +static int spider_host_xlate(struct irq_host *h, struct device_node *ct, + u32 *intspec, unsigned int intsize, + irq_hw_number_t *out_hwirq, unsigned int *out_flags) + +{ + /* Spider interrupts have 2 cells, first is the interrupt source, + * second, well, I don't know for sure yet ... We mask the top bits + * because old device-trees encode a node number in there + */ + *out_hwirq = intspec[0] & 0x3f; + *out_flags = IRQ_TYPE_LEVEL_HIGH; + return 0; } +static struct irq_host_ops spider_host_ops = { + .match = spider_host_match, + .map = spider_host_map, + .xlate = spider_host_xlate, +}; + static void spider_irq_cascade(unsigned int irq, struct irq_desc *desc, struct pt_regs *regs) { - int node = (int)(long)desc->handler_data; - int cascade_irq; + struct spider_pic *pic = desc->handler_data; + unsigned int cs, virq; - cascade_irq = spider_get_irq(node); - generic_handle_irq(cascade_irq, regs); + cs = in_be32(pic->regs + TIR_CS) >> 24; + if (cs == SPIDER_IRQ_INVALID) + virq = NO_IRQ; + else + virq = irq_linear_revmap(pic->host, cs); + if (virq != NO_IRQ) + generic_handle_irq(virq, regs); desc->chip->eoi(irq); } -/* hardcoded part to be compatible with older firmware */ +/* For hooking up the cascace we have a problem. Our device-tree is + * crap and we don't know on which BE iic interrupt we are hooked on at + * least not the "standard" way. We can reconstitute it based on two + * informations though: which BE node we are connected to and wether + * we are connected to IOIF0 or IOIF1. Right now, we really only care + * about the IBM cell blade and we know that its firmware gives us an + * interrupt-map property which is pretty strange. + */ +static unsigned int __init spider_find_cascade_and_node(struct spider_pic *pic) +{ + unsigned int virq; + u32 *imap, *tmp; + int imaplen, intsize, unit; + struct device_node *iic; + struct irq_host *iic_host; + +#if 0 /* Enable that when we have a way to retreive the node as well */ + /* First, we check wether we have a real "interrupts" in the device + * tree in case the device-tree is ever fixed + */ + struct of_irq oirq; + if (of_irq_map_one(pic->of_node, 0, &oirq) == 0) { + virq = irq_create_of_mapping(oirq.controller, oirq.specifier, + oirq.size); + goto bail; + } +#endif + + /* Now do the horrible hacks */ + tmp = (u32 *)get_property(pic->of_node, "#interrupt-cells", NULL); + if (tmp == NULL) + return NO_IRQ; + intsize = *tmp; + imap = (u32 *)get_property(pic->of_node, "interrupt-map", &imaplen); + if (imap == NULL || imaplen < (intsize + 1)) + return NO_IRQ; + iic = of_find_node_by_phandle(imap[intsize]); + if (iic == NULL) + return NO_IRQ; + imap += intsize + 1; + tmp = (u32 *)get_property(iic, "#interrupt-cells", NULL); + if (tmp == NULL) + return NO_IRQ; + intsize = *tmp; + /* Assume unit is last entry of interrupt specifier */ + unit = imap[intsize - 1]; + /* Ok, we have a unit, now let's try to get the node */ + tmp = (u32 *)get_property(iic, "ibm,interrupt-server-ranges", NULL); + if (tmp == NULL) { + of_node_put(iic); + return NO_IRQ; + } + /* ugly as hell but works for now */ + pic->node_id = (*tmp) >> 1; + of_node_put(iic); + + /* Ok, now let's get cracking. You may ask me why I just didn't match + * the iic host from the iic OF node, but that way I'm still compatible + * with really really old old firmwares for which we don't have a node + */ + iic_host = iic_get_irq_host(pic->node_id); + if (iic_host == NULL) + return NO_IRQ; + /* Manufacture an IIC interrupt number of class 2 */ + virq = irq_create_mapping(iic_host, 0x20 | unit, 0); + if (virq == NO_IRQ) + printk(KERN_ERR "spider_pic: failed to map cascade !"); + return virq; +} + -static void __init spider_init_one(int node, unsigned long addr) +static void __init spider_init_one(struct device_node *of_node, int chip, + unsigned long addr) { - int n, irq; + struct spider_pic *pic = &spider_pics[chip]; + int i, virq; - spider_pics[node] = ioremap(addr, 0x800); - if (spider_pics[node] == NULL) + /* Map registers */ + pic->regs = ioremap(addr, 0x1000); + if (pic->regs == NULL) panic("spider_pic: can't map registers !"); - printk(KERN_INFO "spider_pic: mapped for node %d, addr: 0x%lx mapped to %p\n", - node, addr, spider_pics[node]); + /* Allocate a host */ + pic->host = irq_alloc_host(IRQ_HOST_MAP_LINEAR, SPIDER_SRC_COUNT, + &spider_host_ops, SPIDER_IRQ_INVALID); + if (pic->host == NULL) + panic("spider_pic: can't allocate irq host !"); + pic->host->host_data = pic; - for (n = 0; n < IIC_NUM_EXT; n++) { - if (n == IIC_EXT_CASCADE) - continue; - irq = n + IIC_EXT_OFFSET + node * IIC_NODE_STRIDE; - set_irq_chip_and_handler(irq, &spider_pic, handle_level_irq); - get_irq_desc(irq)->status |= IRQ_LEVEL; + /* Fill out other bits */ + pic->of_node = of_node_get(of_node); + + /* Go through all sources and disable them */ + for (i = 0; i < SPIDER_SRC_COUNT; i++) { + void __iomem *cfg = pic->regs + TIR_CFGA + 8 * i; + out_be32(cfg, in_be32(cfg) & ~0x30000000u); } /* do not mask any interrupts because of level */ - out_be32(spider_pics[node] + TIR_MSK, 0x0); - - /* disable edge detection clear */ - /* out_be32(spider_pics[node] + TIR_EDC, 0x0); */ + out_be32(pic->regs + TIR_MSK, 0x0); /* enable interrupt packets to be output */ - out_be32(spider_pics[node] + TIR_PIEN, - in_be32(spider_pics[node] + TIR_PIEN) | 0x1); + out_be32(pic->regs + TIR_PIEN, in_be32(pic->regs + TIR_PIEN) | 0x1); - /* Hook up cascade */ - irq = IIC_EXT_CASCADE + node * IIC_NODE_STRIDE; - set_irq_data(irq, (void *)(long)node); - set_irq_chained_handler(irq, spider_irq_cascade); + /* Hook up the cascade interrupt to the iic and nodeid */ + virq = spider_find_cascade_and_node(pic); + if (virq == NO_IRQ) + return; + set_irq_data(virq, pic); + set_irq_chained_handler(virq, spider_irq_cascade); + + printk(KERN_INFO "spider_pic: node %d, addr: 0x%lx %s\n", + pic->node_id, addr, of_node->full_name); /* Enable the interrupt detection enable bit. Do this last! */ - out_be32(spider_pics[node] + TIR_DEN, - in_be32(spider_pics[node] + TIR_DEN) | 0x1); + out_be32(pic->regs + TIR_DEN, in_be32(pic->regs + TIR_DEN) | 0x1); } void __init spider_init_IRQ(void) { - unsigned long *spider_reg; + struct resource r; struct device_node *dn; - char *compatible; - int node = 0; - - /* XXX node numbers are totally bogus. We _hope_ we get the device nodes in the right - * order here but that's definitely not guaranteed, we need to get the node from the - * device tree instead. There is currently no proper property for it (but our whole - * device-tree is bogus anyway) so all we can do is pray or maybe test the address - * and deduce the node-id + int chip = 0; + + /* XXX node numbers are totally bogus. We _hope_ we get the device + * nodes in the right order here but that's definitely not guaranteed, + * we need to get the node from the device tree instead. + * There is currently no proper property for it (but our whole + * device-tree is bogus anyway) so all we can do is pray or maybe test + * the address and deduce the node-id */ - for (dn = NULL; (dn = of_find_node_by_name(dn, "interrupt-controller"));) { - compatible = (char *)get_property(dn, "compatible", NULL); - - if (!compatible) - continue; - - if (strstr(compatible, "CBEA,platform-spider-pic")) - spider_reg = (unsigned long *)get_property(dn, "reg", NULL); - else if (strstr(compatible, "sti,platform-spider-pic") && (node < 2)) { - static long hard_coded_pics[] = { 0x24000008000, 0x34000008000 }; - spider_reg = &hard_coded_pics[node]; + for (dn = NULL; + (dn = of_find_node_by_name(dn, "interrupt-controller"));) { + if (device_is_compatible(dn, "CBEA,platform-spider-pic")) { + if (of_address_to_resource(dn, 0, &r)) { + printk(KERN_WARNING "spider-pic: Failed\n"); + continue; + } + } else if (device_is_compatible(dn, "sti,platform-spider-pic") + && (chip < 2)) { + static long hard_coded_pics[] = + { 0x24000008000, 0x34000008000 }; + r.start = hard_coded_pics[chip]; } else continue; - - if (spider_reg == NULL) - printk(KERN_ERR "spider_pic: No address for node %d\n", node); - - spider_init_one(node, *spider_reg); - node++; + spider_init_one(dn, chip++, r.start); } } diff --git a/arch/powerpc/platforms/cell/spu_base.c b/arch/powerpc/platforms/cell/spu_base.c index 656c1ef5f4ad..5d2313a6c82b 100644 --- a/arch/powerpc/platforms/cell/spu_base.c +++ b/arch/powerpc/platforms/cell/spu_base.c @@ -264,51 +264,57 @@ spu_irq_class_2(int irq, void *data, struct pt_regs *regs) return stat ? IRQ_HANDLED : IRQ_NONE; } -static int -spu_request_irqs(struct spu *spu) +static int spu_request_irqs(struct spu *spu) { - int ret; - int irq_base; - - irq_base = IIC_NODE_STRIDE * spu->node + IIC_SPE_OFFSET; - - snprintf(spu->irq_c0, sizeof (spu->irq_c0), "spe%02d.0", spu->number); - ret = request_irq(irq_base + spu->isrc, - spu_irq_class_0, IRQF_DISABLED, spu->irq_c0, spu); - if (ret) - goto out; - - snprintf(spu->irq_c1, sizeof (spu->irq_c1), "spe%02d.1", spu->number); - ret = request_irq(irq_base + IIC_CLASS_STRIDE + spu->isrc, - spu_irq_class_1, IRQF_DISABLED, spu->irq_c1, spu); - if (ret) - goto out1; + int ret = 0; - snprintf(spu->irq_c2, sizeof (spu->irq_c2), "spe%02d.2", spu->number); - ret = request_irq(irq_base + 2*IIC_CLASS_STRIDE + spu->isrc, - spu_irq_class_2, IRQF_DISABLED, spu->irq_c2, spu); - if (ret) - goto out2; - goto out; + if (spu->irqs[0] != NO_IRQ) { + snprintf(spu->irq_c0, sizeof (spu->irq_c0), "spe%02d.0", + spu->number); + ret = request_irq(spu->irqs[0], spu_irq_class_0, + IRQF_DISABLED, + spu->irq_c0, spu); + if (ret) + goto bail0; + } + if (spu->irqs[1] != NO_IRQ) { + snprintf(spu->irq_c1, sizeof (spu->irq_c1), "spe%02d.1", + spu->number); + ret = request_irq(spu->irqs[1], spu_irq_class_1, + IRQF_DISABLED, + spu->irq_c1, spu); + if (ret) + goto bail1; + } + if (spu->irqs[2] != NO_IRQ) { + snprintf(spu->irq_c2, sizeof (spu->irq_c2), "spe%02d.2", + spu->number); + ret = request_irq(spu->irqs[2], spu_irq_class_2, + IRQF_DISABLED, + spu->irq_c2, spu); + if (ret) + goto bail2; + } + return 0; -out2: - free_irq(irq_base + IIC_CLASS_STRIDE + spu->isrc, spu); -out1: - free_irq(irq_base + spu->isrc, spu); -out: +bail2: + if (spu->irqs[1] != NO_IRQ) + free_irq(spu->irqs[1], spu); +bail1: + if (spu->irqs[0] != NO_IRQ) + free_irq(spu->irqs[0], spu); +bail0: return ret; } -static void -spu_free_irqs(struct spu *spu) +static void spu_free_irqs(struct spu *spu) { - int irq_base; - - irq_base = IIC_NODE_STRIDE * spu->node + IIC_SPE_OFFSET; - - free_irq(irq_base + spu->isrc, spu); - free_irq(irq_base + IIC_CLASS_STRIDE + spu->isrc, spu); - free_irq(irq_base + 2*IIC_CLASS_STRIDE + spu->isrc, spu); + if (spu->irqs[0] != NO_IRQ) + free_irq(spu->irqs[0], spu); + if (spu->irqs[1] != NO_IRQ) + free_irq(spu->irqs[1], spu); + if (spu->irqs[2] != NO_IRQ) + free_irq(spu->irqs[2], spu); } static LIST_HEAD(spu_list); @@ -559,17 +565,38 @@ static void spu_unmap(struct spu *spu) iounmap((u8 __iomem *)spu->local_store); } +/* This function shall be abstracted for HV platforms */ +static int __init spu_map_interrupts(struct spu *spu, struct device_node *np) +{ + struct irq_host *host; + unsigned int isrc; + u32 *tmp; + + host = iic_get_irq_host(spu->node); + if (host == NULL) + return -ENODEV; + + /* Get the interrupt source from the device-tree */ + tmp = (u32 *)get_property(np, "isrc", NULL); + if (!tmp) + return -ENODEV; + spu->isrc = isrc = tmp[0]; + + /* Now map interrupts of all 3 classes */ + spu->irqs[0] = irq_create_mapping(host, 0x00 | isrc, 0); + spu->irqs[1] = irq_create_mapping(host, 0x10 | isrc, 0); + spu->irqs[2] = irq_create_mapping(host, 0x20 | isrc, 0); + + /* Right now, we only fail if class 2 failed */ + return spu->irqs[2] == NO_IRQ ? -EINVAL : 0; +} + static int __init spu_map_device(struct spu *spu, struct device_node *node) { char *prop; int ret; ret = -ENODEV; - prop = get_property(node, "isrc", NULL); - if (!prop) - goto out; - spu->isrc = *(unsigned int *)prop; - spu->name = get_property(node, "name", NULL); if (!spu->name) goto out; @@ -636,7 +663,8 @@ static int spu_create_sysdev(struct spu *spu) return ret; } - sysdev_create_file(&spu->sysdev, &attr_isrc); + if (spu->isrc != 0) + sysdev_create_file(&spu->sysdev, &attr_isrc); sysfs_add_device_to_node(&spu->sysdev, spu->nid); return 0; @@ -668,6 +696,9 @@ static int __init create_spu(struct device_node *spe) spu->nid = of_node_to_nid(spe); if (spu->nid == -1) spu->nid = 0; + ret = spu_map_interrupts(spu, spe); + if (ret) + goto out_unmap; spin_lock_init(&spu->register_lock); spu_mfc_sdr_set(spu, mfspr(SPRN_SDR1)); spu_mfc_sr1_set(spu, 0x33); |