summaryrefslogtreecommitdiffstats
path: root/arch/powerpc/platforms/cell
diff options
context:
space:
mode:
Diffstat (limited to 'arch/powerpc/platforms/cell')
-rw-r--r--arch/powerpc/platforms/cell/Makefile5
-rw-r--r--arch/powerpc/platforms/cell/celleb_scc.h145
-rw-r--r--arch/powerpc/platforms/cell/celleb_scc_epci.c438
-rw-r--r--arch/powerpc/platforms/cell/celleb_scc_sio.c101
-rw-r--r--arch/powerpc/platforms/cell/celleb_scc_uhc.c95
5 files changed, 783 insertions, 1 deletions
diff --git a/arch/powerpc/platforms/cell/Makefile b/arch/powerpc/platforms/cell/Makefile
index b644f5717fc2..3b6ee08701f5 100644
--- a/arch/powerpc/platforms/cell/Makefile
+++ b/arch/powerpc/platforms/cell/Makefile
@@ -32,6 +32,9 @@ obj-$(CONFIG_PCI_MSI) += axon_msi.o
# celleb stuff
ifeq ($(CONFIG_PPC_CELLEB),y)
obj-y += celleb_setup.o \
- celleb_pci.o \
+ celleb_pci.o celleb_scc_epci.o \
+ celleb_scc_uhc.o \
io-workarounds.o spider-pci.o
+
+obj-$(CONFIG_SERIAL_TXX9) += celleb_scc_sio.o
endif
diff --git a/arch/powerpc/platforms/cell/celleb_scc.h b/arch/powerpc/platforms/cell/celleb_scc.h
new file mode 100644
index 000000000000..6be1542a6e66
--- /dev/null
+++ b/arch/powerpc/platforms/cell/celleb_scc.h
@@ -0,0 +1,145 @@
+/*
+ * SCC (Super Companion Chip) definitions
+ *
+ * (C) Copyright 2004-2006 TOSHIBA CORPORATION
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#ifndef _CELLEB_SCC_H
+#define _CELLEB_SCC_H
+
+#define PCI_VENDOR_ID_TOSHIBA_2 0x102f
+#define PCI_DEVICE_ID_TOSHIBA_SCC_PCIEXC_BRIDGE 0x01b0
+#define PCI_DEVICE_ID_TOSHIBA_SCC_EPCI_BRIDGE 0x01b1
+#define PCI_DEVICE_ID_TOSHIBA_SCC_BRIDGE 0x01b2
+#define PCI_DEVICE_ID_TOSHIBA_SCC_GBE 0x01b3
+#define PCI_DEVICE_ID_TOSHIBA_SCC_ATA 0x01b4
+#define PCI_DEVICE_ID_TOSHIBA_SCC_USB2 0x01b5
+#define PCI_DEVICE_ID_TOSHIBA_SCC_USB 0x01b6
+#define PCI_DEVICE_ID_TOSHIBA_SCC_ENCDEC 0x01b7
+
+#define SCC_EPCI_REG 0x0000d000
+
+/* EPCI registers */
+#define SCC_EPCI_CNF10_REG 0x010
+#define SCC_EPCI_CNF14_REG 0x014
+#define SCC_EPCI_CNF18_REG 0x018
+#define SCC_EPCI_PVBAT 0x100
+#define SCC_EPCI_VPMBAT 0x104
+#define SCC_EPCI_VPIBAT 0x108
+#define SCC_EPCI_VCSR 0x110
+#define SCC_EPCI_VIENAB 0x114
+#define SCC_EPCI_VISTAT 0x118
+#define SCC_EPCI_VRDCOUNT 0x124
+#define SCC_EPCI_BAM0 0x12c
+#define SCC_EPCI_BAM1 0x134
+#define SCC_EPCI_BAM2 0x13c
+#define SCC_EPCI_IADR 0x164
+#define SCC_EPCI_CLKRST 0x800
+#define SCC_EPCI_INTSET 0x804
+#define SCC_EPCI_STATUS 0x808
+#define SCC_EPCI_ABTSET 0x80c
+#define SCC_EPCI_WATRP 0x810
+#define SCC_EPCI_DUMYRADR 0x814
+#define SCC_EPCI_SWRESP 0x818
+#define SCC_EPCI_CNTOPT 0x81c
+#define SCC_EPCI_ECMODE 0xf00
+#define SCC_EPCI_IOM_AC_NUM 5
+#define SCC_EPCI_IOM_ACTE(n) (0xf10 + (n) * 4)
+#define SCC_EPCI_IOT_AC_NUM 4
+#define SCC_EPCI_IOT_ACTE(n) (0xf30 + (n) * 4)
+#define SCC_EPCI_MAEA 0xf50
+#define SCC_EPCI_MAEC 0xf54
+#define SCC_EPCI_CKCTRL 0xff0
+
+/* bits for SCC_EPCI_VCSR */
+#define SCC_EPCI_VCSR_FRE 0x00020000
+#define SCC_EPCI_VCSR_FWE 0x00010000
+#define SCC_EPCI_VCSR_DR 0x00000400
+#define SCC_EPCI_VCSR_SR 0x00000008
+#define SCC_EPCI_VCSR_AT 0x00000004
+
+/* bits for SCC_EPCI_VIENAB/SCC_EPCI_VISTAT */
+#define SCC_EPCI_VISTAT_PMPE 0x00000008
+#define SCC_EPCI_VISTAT_PMFE 0x00000004
+#define SCC_EPCI_VISTAT_PRA 0x00000002
+#define SCC_EPCI_VISTAT_PRD 0x00000001
+#define SCC_EPCI_VISTAT_ALL 0x0000000f
+
+#define SCC_EPCI_VIENAB_PMPEE 0x00000008
+#define SCC_EPCI_VIENAB_PMFEE 0x00000004
+#define SCC_EPCI_VIENAB_PRA 0x00000002
+#define SCC_EPCI_VIENAB_PRD 0x00000001
+#define SCC_EPCI_VIENAB_ALL 0x0000000f
+
+/* bits for SCC_EPCI_CLKRST */
+#define SCC_EPCI_CLKRST_CKS_MASK 0x00030000
+#define SCC_EPCI_CLKRST_CKS_2 0x00000000
+#define SCC_EPCI_CLKRST_CKS_4 0x00010000
+#define SCC_EPCI_CLKRST_CKS_8 0x00020000
+#define SCC_EPCI_CLKRST_PCICRST 0x00000400
+#define SCC_EPCI_CLKRST_BC 0x00000200
+#define SCC_EPCI_CLKRST_PCIRST 0x00000100
+#define SCC_EPCI_CLKRST_PCKEN 0x00000001
+
+/* bits for SCC_EPCI_INTSET/SCC_EPCI_STATUS */
+#define SCC_EPCI_INT_2M 0x01000000
+#define SCC_EPCI_INT_RERR 0x00200000
+#define SCC_EPCI_INT_SERR 0x00100000
+#define SCC_EPCI_INT_PRTER 0x00080000
+#define SCC_EPCI_INT_SER 0x00040000
+#define SCC_EPCI_INT_PER 0x00020000
+#define SCC_EPCI_INT_PAI 0x00010000
+#define SCC_EPCI_INT_1M 0x00000100
+#define SCC_EPCI_INT_PME 0x00000010
+#define SCC_EPCI_INT_INTD 0x00000008
+#define SCC_EPCI_INT_INTC 0x00000004
+#define SCC_EPCI_INT_INTB 0x00000002
+#define SCC_EPCI_INT_INTA 0x00000001
+#define SCC_EPCI_INT_DEVINT 0x0000000f
+#define SCC_EPCI_INT_ALL 0x003f001f
+#define SCC_EPCI_INT_ALLERR 0x003f0000
+
+/* bits for SCC_EPCI_CKCTRL */
+#define SCC_EPCI_CKCTRL_CRST0 0x00010000
+#define SCC_EPCI_CKCTRL_CRST1 0x00020000
+#define SCC_EPCI_CKCTRL_OCLKEN 0x00000100
+#define SCC_EPCI_CKCTRL_LCLKEN 0x00000001
+
+#define SCC_EPCI_IDSEL_AD_TO_SLOT(ad) ((ad) - 10)
+#define SCC_EPCI_MAX_DEVNU SCC_EPCI_IDSEL_AD_TO_SLOT(32)
+
+/* bits for SCC_EPCI_CNTOPT */
+#define SCC_EPCI_CNTOPT_O2PMB 0x00000002
+
+/* UHC registers */
+#define SCC_UHC_CKRCTRL 0xff0
+#define SCC_UHC_ECMODE 0xf00
+
+/* bits for SCC_UHC_CKRCTRL */
+#define SCC_UHC_F48MCKLEN 0x00000001
+#define SCC_UHC_P_SUSPEND 0x00000002
+#define SCC_UHC_PHY_SUSPEND_SEL 0x00000004
+#define SCC_UHC_HCLKEN 0x00000100
+#define SCC_UHC_USBEN 0x00010000
+#define SCC_UHC_USBCEN 0x00020000
+#define SCC_UHC_PHYEN 0x00040000
+
+/* bits for SCC_UHC_ECMODE */
+#define SCC_UHC_ECMODE_BY_BYTE 0x00000555
+#define SCC_UHC_ECMODE_BY_WORD 0x00000aaa
+
+#endif /* _CELLEB_SCC_H */
diff --git a/arch/powerpc/platforms/cell/celleb_scc_epci.c b/arch/powerpc/platforms/cell/celleb_scc_epci.c
new file mode 100644
index 000000000000..08c285b10e30
--- /dev/null
+++ b/arch/powerpc/platforms/cell/celleb_scc_epci.c
@@ -0,0 +1,438 @@
+/*
+ * Support for SCC external PCI
+ *
+ * (C) Copyright 2004-2007 TOSHIBA CORPORATION
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#undef DEBUG
+
+#include <linux/kernel.h>
+#include <linux/threads.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/pci_regs.h>
+#include <linux/bootmem.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/prom.h>
+#include <asm/pci-bridge.h>
+#include <asm/ppc-pci.h>
+
+#include "celleb_scc.h"
+#include "celleb_pci.h"
+
+#define MAX_PCI_DEVICES 32
+#define MAX_PCI_FUNCTIONS 8
+
+#define iob() __asm__ __volatile__("eieio; sync":::"memory")
+
+static inline PCI_IO_ADDR celleb_epci_get_epci_base(
+ struct pci_controller *hose)
+{
+ /*
+ * Note:
+ * Celleb epci uses cfg_addr as a base address for
+ * epci control registers.
+ */
+
+ return hose->cfg_addr;
+}
+
+static inline PCI_IO_ADDR celleb_epci_get_epci_cfg(
+ struct pci_controller *hose)
+{
+ /*
+ * Note:
+ * Celleb epci uses cfg_data as a base address for
+ * configuration area for epci devices.
+ */
+
+ return hose->cfg_data;
+}
+
+static inline void clear_and_disable_master_abort_interrupt(
+ struct pci_controller *hose)
+{
+ PCI_IO_ADDR epci_base;
+ PCI_IO_ADDR reg;
+ epci_base = celleb_epci_get_epci_base(hose);
+ reg = epci_base + PCI_COMMAND;
+ out_be32(reg, in_be32(reg) | (PCI_STATUS_REC_MASTER_ABORT << 16));
+}
+
+static int celleb_epci_check_abort(struct pci_controller *hose,
+ PCI_IO_ADDR addr)
+{
+ PCI_IO_ADDR reg;
+ PCI_IO_ADDR epci_base;
+ u32 val;
+
+ iob();
+ epci_base = celleb_epci_get_epci_base(hose);
+
+ reg = epci_base + PCI_COMMAND;
+ val = in_be32(reg);
+
+ if (val & (PCI_STATUS_REC_MASTER_ABORT << 16)) {
+ out_be32(reg,
+ (val & 0xffff) | (PCI_STATUS_REC_MASTER_ABORT << 16));
+
+ /* clear PCI Controller error, FRE, PMFE */
+ reg = epci_base + SCC_EPCI_STATUS;
+ out_be32(reg, SCC_EPCI_INT_PAI);
+
+ reg = epci_base + SCC_EPCI_VCSR;
+ val = in_be32(reg) & 0xffff;
+ val |= SCC_EPCI_VCSR_FRE;
+ out_be32(reg, val);
+
+ reg = epci_base + SCC_EPCI_VISTAT;
+ out_be32(reg, SCC_EPCI_VISTAT_PMFE);
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ }
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static PCI_IO_ADDR celleb_epci_make_config_addr(struct pci_bus *bus,
+ struct pci_controller *hose, unsigned int devfn, int where)
+{
+ PCI_IO_ADDR addr;
+
+ if (bus != hose->bus)
+ addr = celleb_epci_get_epci_cfg(hose) +
+ (((bus->number & 0xff) << 16)
+ | ((devfn & 0xff) << 8)
+ | (where & 0xff)
+ | 0x01000000);
+ else
+ addr = celleb_epci_get_epci_cfg(hose) +
+ (((devfn & 0xff) << 8) | (where & 0xff));
+
+ pr_debug("EPCI: config_addr = 0x%p\n", addr);
+
+ return addr;
+}
+
+static int celleb_epci_read_config(struct pci_bus *bus,
+ unsigned int devfn, int where, int size, u32 *val)
+{
+ PCI_IO_ADDR epci_base;
+ PCI_IO_ADDR addr;
+ struct device_node *node;
+ struct pci_controller *hose;
+
+ /* allignment check */
+ BUG_ON(where % size);
+
+ node = (struct device_node *)bus->sysdata;
+ hose = pci_find_hose_for_OF_device(node);
+
+ if (!celleb_epci_get_epci_cfg(hose))
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ if (bus->number == hose->first_busno && devfn == 0) {
+ /* EPCI controller self */
+
+ epci_base = celleb_epci_get_epci_base(hose);
+ addr = epci_base + where;
+
+ switch (size) {
+ case 1:
+ *val = in_8(addr);
+ break;
+ case 2:
+ *val = in_be16(addr);
+ break;
+ case 4:
+ *val = in_be32(addr);
+ break;
+ default:
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ }
+
+ } else {
+
+ clear_and_disable_master_abort_interrupt(hose);
+ addr = celleb_epci_make_config_addr(bus, hose, devfn, where);
+
+ switch (size) {
+ case 1:
+ *val = in_8(addr);
+ break;
+ case 2:
+ *val = in_le16(addr);
+ break;
+ case 4:
+ *val = in_le32(addr);
+ break;
+ default:
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ }
+ }
+
+ pr_debug("EPCI: "
+ "addr=0x%p, devfn=0x%x, where=0x%x, size=0x%x, val=0x%x\n",
+ addr, devfn, where, size, *val);
+
+ return celleb_epci_check_abort(hose, NULL);
+}
+
+static int celleb_epci_write_config(struct pci_bus *bus,
+ unsigned int devfn, int where, int size, u32 val)
+{
+ PCI_IO_ADDR epci_base;
+ PCI_IO_ADDR addr;
+ struct device_node *node;
+ struct pci_controller *hose;
+
+ /* allignment check */
+ BUG_ON(where % size);
+
+ node = (struct device_node *)bus->sysdata;
+ hose = pci_find_hose_for_OF_device(node);
+
+
+ if (!celleb_epci_get_epci_cfg(hose))
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ if (bus->number == hose->first_busno && devfn == 0) {
+ /* EPCI controller self */
+
+ epci_base = celleb_epci_get_epci_base(hose);
+ addr = epci_base + where;
+
+ switch (size) {
+ case 1:
+ out_8(addr, val);
+ break;
+ case 2:
+ out_be16(addr, val);
+ break;
+ case 4:
+ out_be32(addr, val);
+ break;
+ default:
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ }
+
+ } else {
+
+ clear_and_disable_master_abort_interrupt(hose);
+ addr = celleb_epci_make_config_addr(bus, hose, devfn, where);
+
+ switch (size) {
+ case 1:
+ out_8(addr, val);
+ break;
+ case 2:
+ out_le16(addr, val);
+ break;
+ case 4:
+ out_le32(addr, val);
+ break;
+ default:
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ }
+ }
+
+ return celleb_epci_check_abort(hose, addr);
+}
+
+struct pci_ops celleb_epci_ops = {
+ .read = celleb_epci_read_config,
+ .write = celleb_epci_write_config,
+};
+
+/* to be moved in FW */
+static int __init celleb_epci_init(struct pci_controller *hose)
+{
+ u32 val;
+ PCI_IO_ADDR reg;
+ PCI_IO_ADDR epci_base;
+ int hwres = 0;
+
+ epci_base = celleb_epci_get_epci_base(hose);
+
+ /* PCI core reset(Internal bus and PCI clock) */
+ reg = epci_base + SCC_EPCI_CKCTRL;
+ val = in_be32(reg);
+ if (val == 0x00030101)
+ hwres = 1;
+ else {
+ val &= ~(SCC_EPCI_CKCTRL_CRST0 | SCC_EPCI_CKCTRL_CRST1);
+ out_be32(reg, val);
+
+ /* set PCI core clock */
+ val = in_be32(reg);
+ val |= (SCC_EPCI_CKCTRL_OCLKEN | SCC_EPCI_CKCTRL_LCLKEN);
+ out_be32(reg, val);
+
+ /* release PCI core reset (internal bus) */
+ val = in_be32(reg);
+ val |= SCC_EPCI_CKCTRL_CRST0;
+ out_be32(reg, val);
+
+ /* set PCI clock select */
+ reg = epci_base + SCC_EPCI_CLKRST;
+ val = in_be32(reg);
+ val &= ~SCC_EPCI_CLKRST_CKS_MASK;
+ val |= SCC_EPCI_CLKRST_CKS_2;
+ out_be32(reg, val);
+
+ /* set arbiter */
+ reg = epci_base + SCC_EPCI_ABTSET;
+ out_be32(reg, 0x0f1f001f); /* temporary value */
+
+ /* buffer on */
+ reg = epci_base + SCC_EPCI_CLKRST;
+ val = in_be32(reg);
+ val |= SCC_EPCI_CLKRST_BC;
+ out_be32(reg, val);
+
+ /* PCI clock enable */
+ val = in_be32(reg);
+ val |= SCC_EPCI_CLKRST_PCKEN;
+ out_be32(reg, val);
+
+ /* release PCI core reset (all) */
+ reg = epci_base + SCC_EPCI_CKCTRL;
+ val = in_be32(reg);
+ val |= (SCC_EPCI_CKCTRL_CRST0 | SCC_EPCI_CKCTRL_CRST1);
+ out_be32(reg, val);
+
+ /* set base translation registers. (already set by Beat) */
+
+ /* set base address masks. (already set by Beat) */
+ }
+
+ /* release interrupt masks and clear all interrupts */
+ reg = epci_base + SCC_EPCI_INTSET;
+ out_be32(reg, 0x013f011f); /* all interrupts enable */
+ reg = epci_base + SCC_EPCI_VIENAB;
+ val = SCC_EPCI_VIENAB_PMPEE | SCC_EPCI_VIENAB_PMFEE;
+ out_be32(reg, val);
+ reg = epci_base + SCC_EPCI_STATUS;
+ out_be32(reg, 0xffffffff);
+ reg = epci_base + SCC_EPCI_VISTAT;
+ out_be32(reg, 0xffffffff);
+
+ /* disable PCI->IB address translation */
+ reg = epci_base + SCC_EPCI_VCSR;
+ val = in_be32(reg);
+ val &= ~(SCC_EPCI_VCSR_DR | SCC_EPCI_VCSR_AT);
+ out_be32(reg, val);
+
+ /* set base addresses. (no need to set?) */
+
+ /* memory space, bus master enable */
+ reg = epci_base + PCI_COMMAND;
+ val = PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER;
+ out_be32(reg, val);
+
+ /* endian mode setup */
+ reg = epci_base + SCC_EPCI_ECMODE;
+ val = 0x00550155;
+ out_be32(reg, val);
+
+ /* set control option */
+ reg = epci_base + SCC_EPCI_CNTOPT;
+ val = in_be32(reg);
+ val |= SCC_EPCI_CNTOPT_O2PMB;
+ out_be32(reg, val);
+
+ /* XXX: temporay: set registers for address conversion setup */
+ reg = epci_base + SCC_EPCI_CNF10_REG;
+ out_be32(reg, 0x80000008);
+ reg = epci_base + SCC_EPCI_CNF14_REG;
+ out_be32(reg, 0x40000008);
+
+ reg = epci_base + SCC_EPCI_BAM0;
+ out_be32(reg, 0x80000000);
+ reg = epci_base + SCC_EPCI_BAM1;
+ out_be32(reg, 0xe0000000);
+
+ reg = epci_base + SCC_EPCI_PVBAT;
+ out_be32(reg, 0x80000000);
+
+ if (!hwres) {
+ /* release external PCI reset */
+ reg = epci_base + SCC_EPCI_CLKRST;
+ val = in_be32(reg);
+ val |= SCC_EPCI_CLKRST_PCIRST;
+ out_be32(reg, val);
+ }
+
+ return 0;
+}
+
+static int __init celleb_setup_epci(struct device_node *node,
+ struct pci_controller *hose)
+{
+ struct resource r;
+
+ pr_debug("PCI: celleb_setup_epci()\n");
+
+ /*
+ * Note:
+ * Celleb epci uses cfg_addr and cfg_data member of
+ * pci_controller structure in irregular way.
+ *
+ * cfg_addr is used to map for control registers of
+ * celleb epci.
+ *
+ * cfg_data is used for configuration area of devices
+ * on Celleb epci buses.
+ */
+
+ if (of_address_to_resource(node, 0, &r))
+ goto error;
+ hose->cfg_addr = ioremap(r.start, (r.end - r.start + 1));
+ if (!hose->cfg_addr)
+ goto error;
+ pr_debug("EPCI: cfg_addr map 0x%016lx->0x%016lx + 0x%016lx\n",
+ r.start, (unsigned long)hose->cfg_addr, (r.end - r.start + 1));
+
+ if (of_address_to_resource(node, 2, &r))
+ goto error;
+ hose->cfg_data = ioremap(r.start, (r.end - r.start + 1));
+ if (!hose->cfg_data)
+ goto error;
+ pr_debug("EPCI: cfg_data map 0x%016lx->0x%016lx + 0x%016lx\n",
+ r.start, (unsigned long)hose->cfg_data, (r.end - r.start + 1));
+
+ hose->ops = &celleb_epci_ops;
+ celleb_epci_init(hose);
+
+ return 0;
+
+error:
+ if (hose->cfg_addr)
+ iounmap(hose->cfg_addr);
+
+ if (hose->cfg_data)
+ iounmap(hose->cfg_data);
+ return 1;
+}
+
+struct celleb_phb_spec celleb_epci_spec __initdata = {
+ .setup = celleb_setup_epci,
+ .ops = &spiderpci_ops,
+ .iowa_init = &spiderpci_iowa_init,
+ .iowa_data = (void *)0,
+};
diff --git a/arch/powerpc/platforms/cell/celleb_scc_sio.c b/arch/powerpc/platforms/cell/celleb_scc_sio.c
new file mode 100644
index 000000000000..3a16c5b3c464
--- /dev/null
+++ b/arch/powerpc/platforms/cell/celleb_scc_sio.c
@@ -0,0 +1,101 @@
+/*
+ * setup serial port in SCC
+ *
+ * (C) Copyright 2006-2007 TOSHIBA CORPORATION
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <linux/tty.h>
+#include <linux/serial.h>
+#include <linux/serial_core.h>
+#include <linux/console.h>
+
+#include <asm/io.h>
+#include <asm/prom.h>
+
+/* sio irq0=0xb00010022 irq0=0xb00010023 irq2=0xb00010024
+ mmio=0xfff000-0x1000,0xff2000-0x1000 */
+static int txx9_serial_bitmap __initdata;
+
+static struct {
+ uint32_t offset;
+ uint32_t index;
+} txx9_scc_tab[3] __initdata = {
+ { 0x300, 0 }, /* 0xFFF300 */
+ { 0x400, 0 }, /* 0xFFF400 */
+ { 0x800, 1 } /* 0xFF2800 */
+};
+
+static int __init txx9_serial_init(void)
+{
+ extern int early_serial_txx9_setup(struct uart_port *port);
+ struct device_node *node = NULL;
+ int i;
+ struct uart_port req;
+ struct of_irq irq;
+ struct resource res;
+
+ while ((node = of_find_compatible_node(node,
+ "serial", "toshiba,sio-scc")) != NULL) {
+ for (i = 0; i < ARRAY_SIZE(txx9_scc_tab); i++) {
+ if (!(txx9_serial_bitmap & (1<<i)))
+ continue;
+
+ if (of_irq_map_one(node, i, &irq))
+ continue;
+ if (of_address_to_resource(node,
+ txx9_scc_tab[i].index, &res))
+ continue;
+
+ memset(&req, 0, sizeof(req));
+ req.line = i;
+ req.iotype = UPIO_MEM;
+ req.mapbase = res.start + txx9_scc_tab[i].offset;
+#ifdef CONFIG_SERIAL_TXX9_CONSOLE
+ req.membase = ioremap(req.mapbase, 0x24);
+#endif
+ req.irq = irq_create_of_mapping(irq.controller,
+ irq.specifier, irq.size);
+ req.flags |= UPF_IOREMAP | UPF_BUGGY_UART
+ /*HAVE_CTS_LINE*/;
+ req.uartclk = 83300000;
+ early_serial_txx9_setup(&req);
+ }
+ }
+
+ return 0;
+}
+
+static int __init txx9_serial_config(char *ptr)
+{
+ int i;
+
+ for (;;) {
+ switch (get_option(&ptr, &i)) {
+ default:
+ return 0;
+ case 2:
+ txx9_serial_bitmap |= 1 << i;
+ break;
+ case 1:
+ txx9_serial_bitmap |= 1 << i;
+ return 0;
+ }
+ }
+}
+__setup("txx9_serial=", txx9_serial_config);
+
+console_initcall(txx9_serial_init);
diff --git a/arch/powerpc/platforms/cell/celleb_scc_uhc.c b/arch/powerpc/platforms/cell/celleb_scc_uhc.c
new file mode 100644
index 000000000000..d63b720bfe3a
--- /dev/null
+++ b/arch/powerpc/platforms/cell/celleb_scc_uhc.c
@@ -0,0 +1,95 @@
+/*
+ * SCC (Super Companion Chip) UHC setup
+ *
+ * (C) Copyright 2006-2007 TOSHIBA CORPORATION
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+
+#include <asm/delay.h>
+#include <asm/io.h>
+#include <asm/machdep.h>
+
+#include "celleb_scc.h"
+
+#define UHC_RESET_WAIT_MAX 10000
+
+static inline int uhc_clkctrl_ready(u32 val)
+{
+ const u32 mask = SCC_UHC_USBCEN | SCC_UHC_USBCEN;
+ return((val & mask) == mask);
+}
+
+/*
+ * UHC(usb host controller) enable function.
+ * affect to both of OHCI and EHCI core module.
+ */
+static void enable_scc_uhc(struct pci_dev *dev)
+{
+ void __iomem *uhc_base;
+ u32 __iomem *uhc_clkctrl;
+ u32 __iomem *uhc_ecmode;
+ u32 val = 0;
+ int i;
+
+ if (!machine_is(celleb_beat) &&
+ !machine_is(celleb_native))
+ return;
+
+ uhc_base = ioremap(pci_resource_start(dev, 0),
+ pci_resource_len(dev, 0));
+ if (!uhc_base) {
+ printk(KERN_ERR "failed to map UHC register base.\n");
+ return;
+ }
+ uhc_clkctrl = uhc_base + SCC_UHC_CKRCTRL;
+ uhc_ecmode = uhc_base + SCC_UHC_ECMODE;
+
+ /* setup for normal mode */
+ val |= SCC_UHC_F48MCKLEN;
+ out_be32(uhc_clkctrl, val);
+ val |= SCC_UHC_PHY_SUSPEND_SEL;
+ out_be32(uhc_clkctrl, val);
+ udelay(10);
+ val |= SCC_UHC_PHYEN;
+ out_be32(uhc_clkctrl, val);
+ udelay(50);
+
+ /* disable reset */
+ val |= SCC_UHC_HCLKEN;
+ out_be32(uhc_clkctrl, val);
+ val |= (SCC_UHC_USBCEN | SCC_UHC_USBEN);
+ out_be32(uhc_clkctrl, val);
+ i = 0;
+ while (!uhc_clkctrl_ready(in_be32(uhc_clkctrl))) {
+ udelay(10);
+ if (i++ > UHC_RESET_WAIT_MAX) {
+ printk(KERN_ERR "Failed to disable UHC reset %x\n",
+ in_be32(uhc_clkctrl));
+ break;
+ }
+ }
+
+ /* Endian Conversion Mode for Master ALL area */
+ out_be32(uhc_ecmode, SCC_UHC_ECMODE_BY_BYTE);
+
+ iounmap(uhc_base);
+}
+
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TOSHIBA_2,
+ PCI_DEVICE_ID_TOSHIBA_SCC_USB, enable_scc_uhc);
OpenPOWER on IntegriCloud