diff options
Diffstat (limited to 'arch/powerpc/platforms/86xx')
| -rw-r--r-- | arch/powerpc/platforms/86xx/Kconfig | 36 | ||||
| -rw-r--r-- | arch/powerpc/platforms/86xx/Makefile | 10 | ||||
| -rw-r--r-- | arch/powerpc/platforms/86xx/mpc8641_hpcn.h | 54 | ||||
| -rw-r--r-- | arch/powerpc/platforms/86xx/mpc86xx.h | 28 | ||||
| -rw-r--r-- | arch/powerpc/platforms/86xx/mpc86xx_hpcn.c | 326 | ||||
| -rw-r--r-- | arch/powerpc/platforms/86xx/mpc86xx_pcie.c | 173 | ||||
| -rw-r--r-- | arch/powerpc/platforms/86xx/mpc86xx_smp.c | 117 | ||||
| -rw-r--r-- | arch/powerpc/platforms/86xx/pci.c | 325 |
8 files changed, 1069 insertions, 0 deletions
diff --git a/arch/powerpc/platforms/86xx/Kconfig b/arch/powerpc/platforms/86xx/Kconfig new file mode 100644 index 000000000000..3a87863d2876 --- /dev/null +++ b/arch/powerpc/platforms/86xx/Kconfig @@ -0,0 +1,36 @@ +menu "Platform Support" + depends on PPC_86xx + +choice + prompt "Machine Type" + default MPC8641_HPCN + +config MPC8641_HPCN + bool "Freescale MPC8641 HPCN" + help + This option enables support for the MPC8641 HPCN board. + +endchoice + + +config MPC8641 + bool + select PPC_INDIRECT_PCI + select PPC_UDBG_16550 + default y if MPC8641_HPCN + +config MPIC + bool + default y + +config PPC_INDIRECT_PCI_BE + bool + depends on PPC_86xx + default y + +config PPC_STD_MMU + bool + depends on PPC_86xx + default y + +endmenu diff --git a/arch/powerpc/platforms/86xx/Makefile b/arch/powerpc/platforms/86xx/Makefile new file mode 100644 index 000000000000..7be796c5d5c9 --- /dev/null +++ b/arch/powerpc/platforms/86xx/Makefile @@ -0,0 +1,10 @@ +# +# Makefile for the PowerPC 86xx linux kernel. +# + + +ifeq ($(CONFIG_PPC_86xx),y) +obj-$(CONFIG_SMP) += mpc86xx_smp.o +endif +obj-$(CONFIG_MPC8641_HPCN) += mpc86xx_hpcn.o +obj-$(CONFIG_PCI) += pci.o mpc86xx_pcie.o diff --git a/arch/powerpc/platforms/86xx/mpc8641_hpcn.h b/arch/powerpc/platforms/86xx/mpc8641_hpcn.h new file mode 100644 index 000000000000..5042253758b7 --- /dev/null +++ b/arch/powerpc/platforms/86xx/mpc8641_hpcn.h @@ -0,0 +1,54 @@ +/* + * MPC8641 HPCN board definitions + * + * Copyright 2006 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * Author: Xianghua Xiao <x.xiao@freescale.com> + */ + +#ifndef __MPC8641_HPCN_H__ +#define __MPC8641_HPCN_H__ + +#include <linux/config.h> +#include <linux/init.h> + +/* PCI interrupt controller */ +#define PIRQA 3 +#define PIRQB 4 +#define PIRQC 5 +#define PIRQD 6 +#define PIRQ7 7 +#define PIRQE 9 +#define PIRQF 10 +#define PIRQG 11 +#define PIRQH 12 + +/* PCI-Express memory map */ +#define MPC86XX_PCIE_LOWER_IO 0x00000000 +#define MPC86XX_PCIE_UPPER_IO 0x00ffffff + +#define MPC86XX_PCIE_LOWER_MEM 0x80000000 +#define MPC86XX_PCIE_UPPER_MEM 0x9fffffff + +#define MPC86XX_PCIE_IO_BASE 0xe2000000 +#define MPC86XX_PCIE_MEM_OFFSET 0x00000000 + +#define MPC86XX_PCIE_IO_SIZE 0x01000000 + +#define PCIE1_CFG_ADDR_OFFSET (0x8000) +#define PCIE1_CFG_DATA_OFFSET (0x8004) + +#define PCIE2_CFG_ADDR_OFFSET (0x9000) +#define PCIE2_CFG_DATA_OFFSET (0x9004) + +#define MPC86xx_PCIE_OFFSET PCIE1_CFG_ADDR_OFFSET +#define MPC86xx_PCIE_SIZE (0x1000) + +#define MPC86XX_RSTCR_OFFSET (0xe00b0) /* Reset Control Register */ + +#endif /* __MPC8641_HPCN_H__ */ diff --git a/arch/powerpc/platforms/86xx/mpc86xx.h b/arch/powerpc/platforms/86xx/mpc86xx.h new file mode 100644 index 000000000000..e3c9e4f417d3 --- /dev/null +++ b/arch/powerpc/platforms/86xx/mpc86xx.h @@ -0,0 +1,28 @@ +/* + * Copyright 2006 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef __MPC86XX_H__ +#define __MPC86XX_H__ + +/* + * Declaration for the various functions exported by the + * mpc86xx_* files. Mostly for use by mpc86xx_setup(). + */ + +extern int __init add_bridge(struct device_node *dev); + +extern void __init setup_indirect_pcie(struct pci_controller *hose, + u32 cfg_addr, u32 cfg_data); +extern void __init setup_indirect_pcie_nomap(struct pci_controller *hose, + void __iomem *cfg_addr, + void __iomem *cfg_data); + +extern void __init mpc86xx_smp_init(void); + +#endif /* __MPC86XX_H__ */ diff --git a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c new file mode 100644 index 000000000000..483c21df181e --- /dev/null +++ b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c @@ -0,0 +1,326 @@ +/* + * MPC86xx HPCN board specific routines + * + * Recode: ZHANG WEI <wei.zhang@freescale.com> + * Initial author: Xianghua Xiao <x.xiao@freescale.com> + * + * Copyright 2006 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/config.h> +#include <linux/stddef.h> +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/kdev_t.h> +#include <linux/delay.h> +#include <linux/seq_file.h> +#include <linux/root_dev.h> + +#include <asm/system.h> +#include <asm/time.h> +#include <asm/machdep.h> +#include <asm/pci-bridge.h> +#include <asm/mpc86xx.h> +#include <asm/prom.h> +#include <mm/mmu_decl.h> +#include <asm/udbg.h> +#include <asm/i8259.h> + +#include <asm/mpic.h> + +#include <sysdev/fsl_soc.h> + +#include "mpc86xx.h" + +#ifndef CONFIG_PCI +unsigned long isa_io_base = 0; +unsigned long isa_mem_base = 0; +unsigned long pci_dram_offset = 0; +#endif + + +/* + * Internal interrupts are all Level Sensitive, and Positive Polarity + */ + +static u_char mpc86xx_hpcn_openpic_initsenses[] __initdata = { + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 0: Reserved */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 1: MCM */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 2: DDR DRAM */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 3: LBIU */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 4: DMA 0 */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 5: DMA 1 */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 6: DMA 2 */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 7: DMA 3 */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 8: PCIE1 */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 9: PCIE2 */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 10: Reserved */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 11: Reserved */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 12: DUART2 */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 13: TSEC 1 Transmit */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 14: TSEC 1 Receive */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 15: TSEC 3 transmit */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 16: TSEC 3 receive */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 17: TSEC 3 error */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 18: TSEC 1 Receive/Transmit Error */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 19: TSEC 2 Transmit */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 20: TSEC 2 Receive */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 21: TSEC 4 transmit */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 22: TSEC 4 receive */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 23: TSEC 4 error */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 24: TSEC 2 Receive/Transmit Error */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 25: Unused */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 26: DUART1 */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 27: I2C */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 28: Performance Monitor */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 29: Unused */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 30: Unused */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 31: Unused */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 32: SRIO error/write-port unit */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 33: SRIO outbound doorbell */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 34: SRIO inbound doorbell */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 35: Unused */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 36: Unused */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 37: SRIO outbound message unit 1 */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 38: SRIO inbound message unit 1 */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 39: SRIO outbound message unit 2 */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 40: SRIO inbound message unit 2 */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 41: Unused */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 42: Unused */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 43: Unused */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 44: Unused */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 45: Unused */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 46: Unused */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 47: Unused */ + 0x0, /* External 0: */ + 0x0, /* External 1: */ + 0x0, /* External 2: */ + 0x0, /* External 3: */ + 0x0, /* External 4: */ + 0x0, /* External 5: */ + 0x0, /* External 6: */ + 0x0, /* External 7: */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 8: Pixis FPGA */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* External 9: ULI 8259 INTR Cascade */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 10: Quad ETH PHY */ + 0x0, /* External 11: */ + 0x0, + 0x0, + 0x0, + 0x0, +}; + + +void __init +mpc86xx_hpcn_init_irq(void) +{ + struct mpic *mpic1; + phys_addr_t openpic_paddr; + + /* Determine the Physical Address of the OpenPIC regs */ + openpic_paddr = get_immrbase() + MPC86xx_OPENPIC_OFFSET; + + /* Alloc mpic structure and per isu has 16 INT entries. */ + mpic1 = mpic_alloc(openpic_paddr, + MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN, + 16, MPC86xx_OPENPIC_IRQ_OFFSET, 0, 250, + mpc86xx_hpcn_openpic_initsenses, + sizeof(mpc86xx_hpcn_openpic_initsenses), + " MPIC "); + BUG_ON(mpic1 == NULL); + + /* 48 Internal Interrupts */ + mpic_assign_isu(mpic1, 0, openpic_paddr + 0x10200); + mpic_assign_isu(mpic1, 1, openpic_paddr + 0x10400); + mpic_assign_isu(mpic1, 2, openpic_paddr + 0x10600); + + /* 16 External interrupts */ + mpic_assign_isu(mpic1, 3, openpic_paddr + 0x10000); + + mpic_init(mpic1); + +#ifdef CONFIG_PCI + mpic_setup_cascade(MPC86xx_IRQ_EXT9, i8259_irq_cascade, NULL); + i8259_init(0, I8259_OFFSET); +#endif +} + + + +#ifdef CONFIG_PCI +/* + * interrupt routing + */ + +int +mpc86xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) +{ + static char pci_irq_table[][4] = { + /* + * PCI IDSEL/INTPIN->INTLINE + * A B C D + */ + {PIRQA, PIRQB, PIRQC, PIRQD}, /* IDSEL 17 -- PCI Slot 1 */ + {PIRQB, PIRQC, PIRQD, PIRQA}, /* IDSEL 18 -- PCI Slot 2 */ + {0, 0, 0, 0}, /* IDSEL 19 */ + {0, 0, 0, 0}, /* IDSEL 20 */ + {0, 0, 0, 0}, /* IDSEL 21 */ + {0, 0, 0, 0}, /* IDSEL 22 */ + {0, 0, 0, 0}, /* IDSEL 23 */ + {0, 0, 0, 0}, /* IDSEL 24 */ + {0, 0, 0, 0}, /* IDSEL 25 */ + {PIRQD, PIRQA, PIRQB, PIRQC}, /* IDSEL 26 -- PCI Bridge*/ + {PIRQC, 0, 0, 0}, /* IDSEL 27 -- LAN */ + {PIRQE, PIRQF, PIRQH, PIRQ7}, /* IDSEL 28 -- USB 1.1 */ + {PIRQE, PIRQF, PIRQG, 0}, /* IDSEL 29 -- Audio & Modem */ + {PIRQH, 0, 0, 0}, /* IDSEL 30 -- LPC & PMU*/ + {PIRQD, 0, 0, 0}, /* IDSEL 31 -- ATA */ + }; + + const long min_idsel = 17, max_idsel = 31, irqs_per_slot = 4; + return PCI_IRQ_TABLE_LOOKUP + I8259_OFFSET; +} + + +int +mpc86xx_exclude_device(u_char bus, u_char devfn) +{ +#if !defined(CONFIG_PCI) + if (bus == 0 && PCI_SLOT(devfn) == 0) + return PCIBIOS_DEVICE_NOT_FOUND; +#endif + + return PCIBIOS_SUCCESSFUL; +} +#endif /* CONFIG_PCI */ + + +static void __init +mpc86xx_hpcn_setup_arch(void) +{ + struct device_node *np; + + if (ppc_md.progress) + ppc_md.progress("mpc86xx_hpcn_setup_arch()", 0); + + np = of_find_node_by_type(NULL, "cpu"); + if (np != 0) { + unsigned int *fp; + + fp = (int *)get_property(np, "clock-frequency", NULL); + if (fp != 0) + loops_per_jiffy = *fp / HZ; + else + loops_per_jiffy = 50000000 / HZ; + of_node_put(np); + } + +#ifdef CONFIG_PCI + for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;) + add_bridge(np); + + ppc_md.pci_swizzle = common_swizzle; + ppc_md.pci_map_irq = mpc86xx_map_irq; + ppc_md.pci_exclude_device = mpc86xx_exclude_device; +#endif + + printk("MPC86xx HPCN board from Freescale Semiconductor\n"); + +#ifdef CONFIG_ROOT_NFS + ROOT_DEV = Root_NFS; +#else + ROOT_DEV = Root_HDA1; +#endif + +#ifdef CONFIG_SMP + mpc86xx_smp_init(); +#endif +} + + +void +mpc86xx_hpcn_show_cpuinfo(struct seq_file *m) +{ + struct device_node *root; + uint memsize = total_memory; + const char *model = ""; + uint svid = mfspr(SPRN_SVR); + + seq_printf(m, "Vendor\t\t: Freescale Semiconductor\n"); + + root = of_find_node_by_path("/"); + if (root) + model = get_property(root, "model", NULL); + seq_printf(m, "Machine\t\t: %s\n", model); + of_node_put(root); + + seq_printf(m, "SVR\t\t: 0x%x\n", svid); + seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024)); +} + + +/* + * Called very early, device-tree isn't unflattened + */ +static int __init mpc86xx_hpcn_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + if (of_flat_dt_is_compatible(root, "mpc86xx")) + return 1; /* Looks good */ + + return 0; +} + + +void +mpc86xx_restart(char *cmd) +{ + void __iomem *rstcr; + + rstcr = ioremap(get_immrbase() + MPC86XX_RSTCR_OFFSET, 0x100); + + local_irq_disable(); + + /* Assert reset request to Reset Control Register */ + out_be32(rstcr, 0x2); + + /* not reached */ +} + + +long __init +mpc86xx_time_init(void) +{ + unsigned int temp; + + /* Set the time base to zero */ + mtspr(SPRN_TBWL, 0); + mtspr(SPRN_TBWU, 0); + + temp = mfspr(SPRN_HID0); + temp |= HID0_TBEN; + mtspr(SPRN_HID0, temp); + asm volatile("isync"); + + return 0; +} + + +define_machine(mpc86xx_hpcn) { + .name = "MPC86xx HPCN", + .probe = mpc86xx_hpcn_probe, + .setup_arch = mpc86xx_hpcn_setup_arch, + .init_IRQ = mpc86xx_hpcn_init_irq, + .show_cpuinfo = mpc86xx_hpcn_show_cpuinfo, + .get_irq = mpic_get_irq, + .restart = mpc86xx_restart, + .time_init = mpc86xx_time_init, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +}; diff --git a/arch/powerpc/platforms/86xx/mpc86xx_pcie.c b/arch/powerpc/platforms/86xx/mpc86xx_pcie.c new file mode 100644 index 000000000000..a2f4f730213e --- /dev/null +++ b/arch/powerpc/platforms/86xx/mpc86xx_pcie.c @@ -0,0 +1,173 @@ +/* + * Support for indirect PCI bridges. + * + * Copyright (C) 1998 Gabriel Paubert. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * "Temporary" MPC8548 Errata file - + * The standard indirect_pci code should work with future silicon versions. + */ + +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/delay.h> +#include <linux/string.h> +#include <linux/init.h> +#include <linux/bootmem.h> + +#include <asm/io.h> +#include <asm/prom.h> +#include <asm/pci-bridge.h> +#include <asm/machdep.h> + +#include "mpc86xx.h" + +#define PCI_CFG_OUT out_be32 + +/* ERRATA PCI-Ex 14 PCIE Controller timeout */ +#define PCIE_FIX out_be32(hose->cfg_addr+0x4, 0x0400ffff) + + +static int +indirect_read_config_pcie(struct pci_bus *bus, unsigned int devfn, int offset, + int len, u32 *val) +{ + struct pci_controller *hose = bus->sysdata; + volatile void __iomem *cfg_data; + u32 temp; + + if (ppc_md.pci_exclude_device) + if (ppc_md.pci_exclude_device(bus->number, devfn)) + return PCIBIOS_DEVICE_NOT_FOUND; + + /* Possible artifact of CDCpp50937 needs further investigation */ + if (devfn != 0x0 && bus->number == 0xff) + return PCIBIOS_DEVICE_NOT_FOUND; + + PCIE_FIX; + if (bus->number == 0xff) { + PCI_CFG_OUT(hose->cfg_addr, + (0x80000000 | ((offset & 0xf00) << 16) | + ((bus->number - hose->bus_offset) << 16) + | (devfn << 8) | ((offset & 0xfc) ))); + } else { + PCI_CFG_OUT(hose->cfg_addr, + (0x80000001 | ((offset & 0xf00) << 16) | + ((bus->number - hose->bus_offset) << 16) + | (devfn << 8) | ((offset & 0xfc) ))); + } + + /* + * Note: the caller has already checked that offset is + * suitably aligned and that len is 1, 2 or 4. + */ + /* ERRATA PCI-Ex 12 - Configuration Address/Data Alignment */ + cfg_data = hose->cfg_data; + PCIE_FIX; + temp = in_le32(cfg_data); + switch (len) { + case 1: + *val = (temp >> (((offset & 3))*8)) & 0xff; + break; + case 2: + *val = (temp >> (((offset & 3))*8)) & 0xffff; + break; + default: + *val = temp; + break; + } + return PCIBIOS_SUCCESSFUL; +} + +static int +indirect_write_config_pcie(struct pci_bus *bus, unsigned int devfn, int offset, + int len, u32 val) +{ + struct pci_controller *hose = bus->sysdata; + volatile void __iomem *cfg_data; + u32 temp; + + if (ppc_md.pci_exclude_device) + if (ppc_md.pci_exclude_device(bus->number, devfn)) + return PCIBIOS_DEVICE_NOT_FOUND; + + /* Possible artifact of CDCpp50937 needs further investigation */ + if (devfn != 0x0 && bus->number == 0xff) + return PCIBIOS_DEVICE_NOT_FOUND; + + PCIE_FIX; + if (bus->number == 0xff) { + PCI_CFG_OUT(hose->cfg_addr, + (0x80000000 | ((offset & 0xf00) << 16) | + ((bus->number - hose->bus_offset) << 16) + | (devfn << 8) | ((offset & 0xfc) ))); + } else { + PCI_CFG_OUT(hose->cfg_addr, + (0x80000001 | ((offset & 0xf00) << 16) | + ((bus->number - hose->bus_offset) << 16) + | (devfn << 8) | ((offset & 0xfc) ))); + } + + /* + * Note: the caller has already checked that offset is + * suitably aligned and that len is 1, 2 or 4. + */ + /* ERRATA PCI-Ex 12 - Configuration Address/Data Alignment */ + cfg_data = hose->cfg_data; + switch (len) { + case 1: + PCIE_FIX; + temp = in_le32(cfg_data); + temp = (temp & ~(0xff << ((offset & 3) * 8))) | + (val << ((offset & 3) * 8)); + PCIE_FIX; + out_le32(cfg_data, temp); + break; + case 2: + PCIE_FIX; + temp = in_le32(cfg_data); + temp = (temp & ~(0xffff << ((offset & 3) * 8))); + temp |= (val << ((offset & 3) * 8)) ; + PCIE_FIX; + out_le32(cfg_data, temp); + break; + default: + PCIE_FIX; + out_le32(cfg_data, val); + break; + } + PCIE_FIX; + return PCIBIOS_SUCCESSFUL; +} + +static struct pci_ops indirect_pcie_ops = { + indirect_read_config_pcie, + indirect_write_config_pcie +}; + +void __init +setup_indirect_pcie_nomap(struct pci_controller* hose, void __iomem * cfg_addr, + void __iomem * cfg_data) +{ + hose->cfg_addr = cfg_addr; + hose->cfg_data = cfg_data; + hose->ops = &indirect_pcie_ops; +} + +void __init +setup_indirect_pcie(struct pci_controller* hose, u32 cfg_addr, u32 cfg_data) +{ + unsigned long base = cfg_addr & PAGE_MASK; + void __iomem *mbase, *addr, *data; + + mbase = ioremap(base, PAGE_SIZE); + addr = mbase + (cfg_addr & ~PAGE_MASK); + if ((cfg_data & PAGE_MASK) != base) + mbase = ioremap(cfg_data & PAGE_MASK, PAGE_SIZE); + data = mbase + (cfg_data & ~PAGE_MASK); + setup_indirect_pcie_nomap(hose, addr, data); +} diff --git a/arch/powerpc/platforms/86xx/mpc86xx_smp.c b/arch/powerpc/platforms/86xx/mpc86xx_smp.c new file mode 100644 index 000000000000..944ec4b71416 --- /dev/null +++ b/arch/powerpc/platforms/86xx/mpc86xx_smp.c @@ -0,0 +1,117 @@ +/* + * Author: Xianghua Xiao <x.xiao@freescale.com> + * Zhang Wei <wei.zhang@freescale.com> + * + * Copyright 2006 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/config.h> +#include <linux/stddef.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/delay.h> + +#include <asm/pgtable.h> +#include <asm/page.h> +#include <asm/pci-bridge.h> +#include <asm-powerpc/mpic.h> +#include <asm/mpc86xx.h> +#include <asm/cacheflush.h> + +#include <sysdev/fsl_soc.h> + +#include "mpc86xx.h" + +extern void __secondary_start_mpc86xx(void); +extern unsigned long __secondary_hold_acknowledge; + + +static void __init +smp_86xx_release_core(int nr) +{ + void *mcm_vaddr; + unsigned long vaddr, pcr; + + if (nr < 0 || nr >= NR_CPUS) + return; + + /* + * Startup Core #nr. + */ + mcm_vaddr = ioremap(get_immrbase() + MPC86xx_MCM_OFFSET, + MPC86xx_MCM_SIZE); + vaddr = (unsigned long)mcm_vaddr + MCM_PORT_CONFIG_OFFSET; + pcr = in_be32((volatile unsigned *)vaddr); + pcr |= 1 << (nr + 24); + out_be32((volatile unsigned *)vaddr, pcr); +} + + +static void __init +smp_86xx_kick_cpu(int nr) +{ + unsigned int save_vector; + unsigned long target, flags; + int n = 0; + volatile unsigned int *vector + = (volatile unsigned int *)(KERNELBASE + 0x100); + + if (nr < 0 || nr >= NR_CPUS) + return; + + pr_debug("smp_86xx_kick_cpu: kick CPU #%d\n", nr); + + local_irq_save(flags); + local_irq_disable(); + + /* Save reset vector */ + save_vector = *vector; + + /* Setup fake reset vector to call __secondary_start_mpc86xx. */ + target = (unsigned long) __secondary_start_mpc86xx; + create_branch((unsigned long)vector, target, BRANCH_SET_LINK); + + /* Kick that CPU */ + smp_86xx_release_core(nr); + + /* Wait a bit for the CPU to take the exception. */ + while ((__secondary_hold_acknowledge != nr) && (n++, n < 1000)) + mdelay(1); + + /* Restore the exception vector */ + *vector = save_vector; + flush_icache_range((unsigned long) vector, (unsigned long) vector + 4); + + local_irq_restore(flags); + + pr_debug("wait CPU #%d for %d msecs.\n", nr, n); +} + + +static void __init +smp_86xx_setup_cpu(int cpu_nr) +{ + mpic_setup_this_cpu(); +} + + +struct smp_ops_t smp_86xx_ops = { + .message_pass = smp_mpic_message_pass, + .probe = smp_mpic_probe, + .kick_cpu = smp_86xx_kick_cpu, + .setup_cpu = smp_86xx_setup_cpu, + .take_timebase = smp_generic_take_timebase, + .give_timebase = smp_generic_give_timebase, +}; + + +void __init +mpc86xx_smp_init(void) +{ + smp_ops = &smp_86xx_ops; +} diff --git a/arch/powerpc/platforms/86xx/pci.c b/arch/powerpc/platforms/86xx/pci.c new file mode 100644 index 000000000000..5180df7c75bc --- /dev/null +++ b/arch/powerpc/platforms/86xx/pci.c @@ -0,0 +1,325 @@ +/* + * MPC86XX pci setup code + * + * Recode: ZHANG WEI <wei.zhang@freescale.com> + * Initial author: Xianghua Xiao <x.xiao@freescale.com> + * + * Copyright 2006 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/config.h> +#include <linux/types.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/pci.h> +#include <linux/serial.h> + +#include <asm/system.h> +#include <asm/atomic.h> +#include <asm/io.h> +#include <asm/prom.h> +#include <asm/immap_86xx.h> +#include <asm/pci-bridge.h> +#include <sysdev/fsl_soc.h> + +#include "mpc86xx.h" + +#undef DEBUG + +#ifdef DEBUG +#define DBG(fmt, args...) printk(KERN_ERR "%s: " fmt, __FUNCTION__, ## args) +#else +#define DBG(fmt, args...) +#endif + +struct pcie_outbound_window_regs { + uint pexotar; /* 0x.0 - PCI Express outbound translation address register */ + uint pexotear; /* 0x.4 - PCI Express outbound translation extended address register */ + uint pexowbar; /* 0x.8 - PCI Express outbound window base address register */ + char res1[4]; + uint pexowar; /* 0x.10 - PCI Express outbound window attributes register */ + char res2[12]; +}; + +struct pcie_inbound_window_regs { + uint pexitar; /* 0x.0 - PCI Express inbound translation address register */ + char res1[4]; + uint pexiwbar; /* 0x.8 - PCI Express inbound window base address register */ + uint pexiwbear; /* 0x.c - PCI Express inbound window base extended address register */ + uint pexiwar; /* 0x.10 - PCI Express inbound window attributes register */ + char res2[12]; +}; + +static void __init setup_pcie_atmu(struct pci_controller *hose, struct resource *rsrc) +{ + volatile struct ccsr_pex *pcie; + volatile struct pcie_outbound_window_regs *pcieow; + volatile struct pcie_inbound_window_regs *pcieiw; + int i = 0; + + DBG("PCIE memory map start 0x%x, size 0x%x\n", rsrc->start, + rsrc->end - rsrc->start + 1); + pcie = ioremap(rsrc->start, rsrc->end - rsrc->start + 1); + + /* Disable all windows (except pexowar0 since its ignored) */ + pcie->pexowar1 = 0; + pcie->pexowar2 = 0; + pcie->pexowar3 = 0; + pcie->pexowar4 = 0; + pcie->pexiwar1 = 0; + pcie->pexiwar2 = 0; + pcie->pexiwar3 = 0; + + pcieow = (struct pcie_outbound_window_regs *)&pcie->pexotar1; + pcieiw = (struct pcie_inbound_window_regs *)&pcie->pexitar1; + + /* Setup outbound MEM window */ + for(i = 0; i < 3; i++) + if (hose->mem_resources[i].flags & IORESOURCE_MEM){ + DBG("PCIE MEM resource start 0x%08x, size 0x%08x.\n", + hose->mem_resources[i].start, + hose->mem_resources[i].end + - hose->mem_resources[i].start + 1); + pcieow->pexotar = (hose->mem_resources[i].start) >> 12 + & 0x000fffff; + pcieow->pexotear = 0; + pcieow->pexowbar = (hose->mem_resources[i].start) >> 12 + & 0x000fffff; + /* Enable, Mem R/W */ + pcieow->pexowar = 0x80044000 | + (__ilog2(hose->mem_resources[i].end + - hose->mem_resources[i].start + 1) + - 1); + pcieow++; + } + + /* Setup outbound IO window */ + if (hose->io_resource.flags & IORESOURCE_IO){ + DBG("PCIE IO resource start 0x%08x, size 0x%08x, phy base 0x%08x.\n", + hose->io_resource.start, + hose->io_resource.end - hose->io_resource.start + 1, + hose->io_base_phys); + pcieow->pexotar = (hose->io_resource.start) >> 12 & 0x000fffff; + pcieow->pexotear = 0; + pcieow->pexowbar = (hose->io_base_phys) >> 12 & 0x000fffff; + /* Enable, IO R/W */ + pcieow->pexowar = 0x80088000 | (__ilog2(hose->io_resource.end + - hose->io_resource.start + 1) - 1); + } + + /* Setup 2G inbound Memory Window @ 0 */ + pcieiw->pexitar = 0x00000000; + pcieiw->pexiwbar = 0x00000000; + /* Enable, Prefetch, Local Mem, Snoop R/W, 2G */ + pcieiw->pexiwar = 0xa0f5501e; +} + +static void __init +mpc86xx_setup_pcie(struct pci_controller *hose, u32 pcie_offset, u32 pcie_size) +{ + volatile struct ccsr_pex *pcie; + u16 cmd; + unsigned int temps; + + DBG("PCIE host controller register offset 0x%08x, size 0x%08x.\n", + pcie_offset, pcie_size); + + pcie = ioremap(pcie_offset, pcie_size); + + early_read_config_word(hose, 0, 0, PCI_COMMAND, &cmd); + cmd |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY + | PCI_COMMAND_IO; + early_write_config_word(hose, 0, 0, PCI_COMMAND, cmd); + + early_write_config_byte(hose, 0, 0, PCI_LATENCY_TIMER, 0x80); + + /* PCIE Bus, Fix the MPC8641D host bridge's location to bus 0xFF. */ + early_read_config_dword(hose, 0, 0, PCI_PRIMARY_BUS, &temps); + temps = (temps & 0xff000000) | (0xff) | (0x0 << 8) | (0xfe << 16); + early_write_config_dword(hose, 0, 0, PCI_PRIMARY_BUS, temps); +} + +int __init add_bridge(struct device_node *dev) +{ + int len; + struct pci_controller *hose; + struct resource rsrc; + int *bus_range; + int has_address = 0; + int primary = 0; + + DBG("Adding PCIE host bridge %s\n", dev->full_name); + + /* Fetch host bridge registers address */ + has_address = (of_address_to_resource(dev, 0, &rsrc) == 0); + + /* Get bus range if any */ + bus_range = (int *) get_property(dev, "bus-range", &len); + if (bus_range == NULL || len < 2 * sizeof(int)) + printk(KERN_WARNING "Can't get bus-range for %s, assume" + " bus 0\n", dev->full_name); + + hose = pcibios_alloc_controller(); + if (!hose) + return -ENOMEM; + hose->arch_data = dev; + hose->set_cfg_type = 1; + + /* last_busno = 0xfe cause by MPC8641 PCIE bug */ + hose->first_busno = bus_range ? bus_range[0] : 0x0; + hose->last_busno = bus_range ? bus_range[1] : 0xfe; + + setup_indirect_pcie(hose, rsrc.start, rsrc.start + 0x4); + + /* Setup the PCIE host controller. */ + mpc86xx_setup_pcie(hose, rsrc.start, rsrc.end - rsrc.start + 1); + + if ((rsrc.start & 0xfffff) == 0x8000) + primary = 1; + + printk(KERN_INFO "Found MPC86xx PCIE host bridge at 0x%08lx. " + "Firmware bus number: %d->%d\n", + rsrc.start, hose->first_busno, hose->last_busno); + + DBG(" ->Hose at 0x%p, cfg_addr=0x%p,cfg_data=0x%p\n", + hose, hose->cfg_addr, hose->cfg_data); + + /* Interpret the "ranges" property */ + /* This also maps the I/O region and sets isa_io/mem_base */ + pci_process_bridge_OF_ranges(hose, dev, primary); + + /* Setup PEX window registers */ + setup_pcie_atmu(hose, &rsrc); + + return 0; +} + +static void __devinit quirk_ali1575(struct pci_dev *dev) +{ + unsigned short temp; + + /* + * ALI1575 interrupts route table setup: + * + * IRQ pin IRQ# + * PIRQA ---- 3 + * PIRQB ---- 4 + * PIRQC ---- 5 + * PIRQD ---- 6 + * PIRQE ---- 9 + * PIRQF ---- 10 + * PIRQG ---- 11 + * PIRQH ---- 12 + * + * interrupts for PCI slot0 -- PIRQA / PIRQB / PIRQC / PIRQD + * PCI slot1 -- PIRQB / PIRQC / PIRQD / PIRQA + */ + pci_write_config_dword(dev, 0x48, 0xb9317542); + + /* USB 1.1 OHCI controller 1, interrupt: PIRQE */ + pci_write_config_byte(dev, 0x86, 0x0c); + + /* USB 1.1 OHCI controller 2, interrupt: PIRQF */ + pci_write_config_byte(dev, 0x87, 0x0d); + + /* USB 1.1 OHCI controller 3, interrupt: PIRQH */ + pci_write_config_byte(dev, 0x88, 0x0f); + + /* USB 2.0 controller, interrupt: PIRQ7 */ + pci_write_config_byte(dev, 0x74, 0x06); + + /* Audio controller, interrupt: PIRQE */ + pci_write_config_byte(dev, 0x8a, 0x0c); + + /* Modem controller, interrupt: PIRQF */ + pci_write_config_byte(dev, 0x8b, 0x0d); + + /* HD audio controller, interrupt: PIRQG */ + pci_write_config_byte(dev, 0x8c, 0x0e); + + /* Serial ATA interrupt: PIRQD */ + pci_write_config_byte(dev, 0x8d, 0x0b); + + /* SMB interrupt: PIRQH */ + pci_write_config_byte(dev, 0x8e, 0x0f); + + /* PMU ACPI SCI interrupt: PIRQH */ + pci_write_config_byte(dev, 0x8f, 0x0f); + + /* Primary PATA IDE IRQ: 14 + * Secondary PATA IDE IRQ: 15 + */ + pci_write_config_byte(dev, 0x44, 0x3d); + pci_write_config_byte(dev, 0x75, 0x0f); + + /* Set IRQ14 and IRQ15 to legacy IRQs */ + pci_read_config_word(dev, 0x46, &temp); + temp |= 0xc000; + pci_write_config_word(dev, 0x46, temp); + + /* Set i8259 interrupt trigger + * IRQ 3: Level + * IRQ 4: Level + * IRQ 5: Level + * IRQ 6: Level + * IRQ 7: Level + * IRQ 9: Level + * IRQ 10: Level + * IRQ 11: Level + * IRQ 12: Level + * IRQ 14: Edge + * IRQ 15: Edge + */ + outb(0xfa, 0x4d0); + outb(0x1e, 0x4d1); +} + +static void __devinit quirk_uli5288(struct pci_dev *dev) +{ + unsigned char c; + + pci_read_config_byte(dev,0x83,&c); + c |= 0x80; + pci_write_config_byte(dev, 0x83, c); + + pci_write_config_byte(dev, 0x09, 0x01); + pci_write_config_byte(dev, 0x0a, 0x06); + + pci_read_config_byte(dev,0x83,&c); + c &= 0x7f; + pci_write_config_byte(dev, 0x83, c); + + pci_read_config_byte(dev,0x84,&c); + c |= 0x01; + pci_write_config_byte(dev, 0x84, c); +} + +static void __devinit quirk_uli5229(struct pci_dev *dev) +{ + unsigned short temp; + pci_write_config_word(dev, 0x04, 0x0405); + pci_read_config_word(dev, 0x4a, &temp); + temp |= 0x1000; + pci_write_config_word(dev, 0x4a, temp); +} + +static void __devinit early_uli5249(struct pci_dev *dev) +{ + unsigned char temp; + pci_write_config_word(dev, 0x04, 0x0007); + pci_read_config_byte(dev, 0x7c, &temp); + pci_write_config_byte(dev, 0x7c, 0x80); + pci_write_config_byte(dev, 0x09, 0x01); + pci_write_config_byte(dev, 0x7c, temp); + dev->class |= 0x1; +} + +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x1575, quirk_ali1575); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5288, quirk_uli5288); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, 0x5229, quirk_uli5229); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_AL, 0x5249, early_uli5249); |
