diff options
Diffstat (limited to 'arch/powerpc/platforms/83xx/mpc834x_itx.c')
| -rw-r--r-- | arch/powerpc/platforms/83xx/mpc834x_itx.c | 156 |
1 files changed, 156 insertions, 0 deletions
diff --git a/arch/powerpc/platforms/83xx/mpc834x_itx.c b/arch/powerpc/platforms/83xx/mpc834x_itx.c new file mode 100644 index 000000000000..b46305645d38 --- /dev/null +++ b/arch/powerpc/platforms/83xx/mpc834x_itx.c @@ -0,0 +1,156 @@ +/* + * arch/powerpc/platforms/83xx/mpc834x_itx.c + * + * MPC834x ITX board specific routines + * + * Maintainer: Kumar Gala <galak@kernel.crashing.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/config.h> +#include <linux/stddef.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/reboot.h> +#include <linux/pci.h> +#include <linux/kdev_t.h> +#include <linux/major.h> +#include <linux/console.h> +#include <linux/delay.h> +#include <linux/seq_file.h> +#include <linux/root_dev.h> + +#include <asm/system.h> +#include <asm/atomic.h> +#include <asm/time.h> +#include <asm/io.h> +#include <asm/machdep.h> +#include <asm/ipic.h> +#include <asm/bootinfo.h> +#include <asm/irq.h> +#include <asm/prom.h> +#include <asm/udbg.h> +#include <sysdev/fsl_soc.h> + +#include "mpc83xx.h" + +#include <platforms/83xx/mpc834x_sys.h> + +#ifndef CONFIG_PCI +unsigned long isa_io_base = 0; +unsigned long isa_mem_base = 0; +#endif + +#ifdef CONFIG_PCI +static int +mpc83xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) +{ + static char pci_irq_table[][4] = + /* + * PCI IDSEL/INTPIN->INTLINE + * A B C D + */ + { + {PIRQB, PIRQC, PIRQD, PIRQA}, /* idsel 0x0e */ + {PIRQA, PIRQB, PIRQC, PIRQD}, /* idsel 0x0f */ + {PIRQC, PIRQD, PIRQA, PIRQB}, /* idsel 0x10 */ + }; + + const long min_idsel = 0x0e, max_idsel = 0x10, irqs_per_slot = 4; + return PCI_IRQ_TABLE_LOOKUP; +} +#endif /* CONFIG_PCI */ + +/* ************************************************************************ + * + * Setup the architecture + * + */ +static void __init mpc834x_itx_setup_arch(void) +{ + struct device_node *np; + + if (ppc_md.progress) + ppc_md.progress("mpc834x_itx_setup_arch()", 0); + + np = of_find_node_by_type(NULL, "cpu"); + if (np != 0) { + unsigned int *fp = + (int *)get_property(np, "clock-frequency", NULL); + if (fp != 0) + loops_per_jiffy = *fp / HZ; + else + loops_per_jiffy = 50000000 / HZ; + of_node_put(np); + } +#ifdef CONFIG_PCI + for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;) + add_bridge(np); + + ppc_md.pci_swizzle = common_swizzle; + ppc_md.pci_map_irq = mpc83xx_map_irq; + ppc_md.pci_exclude_device = mpc83xx_exclude_device; +#endif + +#ifdef CONFIG_ROOT_NFS + ROOT_DEV = Root_NFS; +#else + ROOT_DEV = Root_HDA1; +#endif +} + +void __init mpc834x_itx_init_IRQ(void) +{ + u8 senses[8] = { + 0, /* EXT 0 */ + IRQ_SENSE_LEVEL, /* EXT 1 */ + IRQ_SENSE_LEVEL, /* EXT 2 */ + 0, /* EXT 3 */ +#ifdef CONFIG_PCI + IRQ_SENSE_LEVEL, /* EXT 4 */ + IRQ_SENSE_LEVEL, /* EXT 5 */ + IRQ_SENSE_LEVEL, /* EXT 6 */ + IRQ_SENSE_LEVEL, /* EXT 7 */ +#else + 0, /* EXT 4 */ + 0, /* EXT 5 */ + 0, /* EXT 6 */ + 0, /* EXT 7 */ +#endif + }; + + ipic_init(get_immrbase() + 0x00700, 0, 0, senses, 8); + + /* Initialize the default interrupt mapping priorities, + * in case the boot rom changed something on us. + */ + ipic_set_default_priority(); +} + +/* + * Called very early, MMU is off, device-tree isn't unflattened + */ +static int __init mpc834x_itx_probe(void) +{ + /* We always match for now, eventually we should look at the flat + dev tree to ensure this is the board we are suppose to run on + */ + return 1; +} + +define_machine(mpc834x_itx) { + .name = "MPC834x ITX", + .probe = mpc834x_itx_probe, + .setup_arch = mpc834x_itx_setup_arch, + .init_IRQ = mpc834x_itx_init_IRQ, + .get_irq = ipic_get_irq, + .restart = mpc83xx_restart, + .time_init = mpc83xx_time_init, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +}; |
