diff options
Diffstat (limited to 'arch/powerpc/oprofile/op_model_pa6t.c')
| -rw-r--r-- | arch/powerpc/oprofile/op_model_pa6t.c | 234 |
1 files changed, 234 insertions, 0 deletions
diff --git a/arch/powerpc/oprofile/op_model_pa6t.c b/arch/powerpc/oprofile/op_model_pa6t.c new file mode 100644 index 000000000000..e8a56b0adadc --- /dev/null +++ b/arch/powerpc/oprofile/op_model_pa6t.c @@ -0,0 +1,234 @@ +/* + * Copyright (C) 2006-2007 PA Semi, Inc + * + * Author: Shashi Rao, PA Semi + * + * Maintained by: Olof Johansson <olof@lixom.net> + * + * Based on arch/powerpc/oprofile/op_model_power4.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/oprofile.h> +#include <linux/init.h> +#include <linux/smp.h> +#include <linux/percpu.h> +#include <asm/processor.h> +#include <asm/cputable.h> +#include <asm/oprofile_impl.h> +#include <asm/reg.h> + +static unsigned char oprofile_running; + +/* mmcr values are set in pa6t_reg_setup, used in pa6t_cpu_setup */ +static u64 mmcr0_val; +static u64 mmcr1_val; + +/* inited in pa6t_reg_setup */ +static u64 reset_value[OP_MAX_COUNTER]; + +static inline u64 ctr_read(unsigned int i) +{ + switch (i) { + case 0: + return mfspr(SPRN_PA6T_PMC0); + case 1: + return mfspr(SPRN_PA6T_PMC1); + case 2: + return mfspr(SPRN_PA6T_PMC2); + case 3: + return mfspr(SPRN_PA6T_PMC3); + case 4: + return mfspr(SPRN_PA6T_PMC4); + case 5: + return mfspr(SPRN_PA6T_PMC5); + default: + printk(KERN_ERR "ctr_read called with bad arg %u\n", i); + return 0; + } +} + +static inline void ctr_write(unsigned int i, u64 val) +{ + switch (i) { + case 0: + mtspr(SPRN_PA6T_PMC0, val); + break; + case 1: + mtspr(SPRN_PA6T_PMC1, val); + break; + case 2: + mtspr(SPRN_PA6T_PMC2, val); + break; + case 3: + mtspr(SPRN_PA6T_PMC3, val); + break; + case 4: + mtspr(SPRN_PA6T_PMC4, val); + break; + case 5: + mtspr(SPRN_PA6T_PMC5, val); + break; + default: + printk(KERN_ERR "ctr_write called with bad arg %u\n", i); + break; + } +} + + +/* precompute the values to stuff in the hardware registers */ +static void pa6t_reg_setup(struct op_counter_config *ctr, + struct op_system_config *sys, + int num_ctrs) +{ + int pmc; + + /* + * adjust the mmcr0.en[0-5] and mmcr0.inten[0-5] values obtained from the + * event_mappings file by turning off the counters that the user doesn't + * care about + * + * setup user and kernel profiling + */ + for (pmc = 0; pmc < cur_cpu_spec->num_pmcs; pmc++) + if (!ctr[pmc].enabled) { + sys->mmcr0 &= ~(0x1UL << pmc); + sys->mmcr0 &= ~(0x1UL << (pmc+12)); + pr_debug("turned off counter %u\n", pmc); + } + + if (sys->enable_kernel) + sys->mmcr0 |= PA6T_MMCR0_SUPEN | PA6T_MMCR0_HYPEN; + else + sys->mmcr0 &= ~(PA6T_MMCR0_SUPEN | PA6T_MMCR0_HYPEN); + + if (sys->enable_user) + sys->mmcr0 |= PA6T_MMCR0_PREN; + else + sys->mmcr0 &= ~PA6T_MMCR0_PREN; + + /* + * The performance counter event settings are given in the mmcr0 and + * mmcr1 values passed from the user in the op_system_config + * structure (sys variable). + */ + mmcr0_val = sys->mmcr0; + mmcr1_val = sys->mmcr1; + pr_debug("mmcr0_val inited to %016lx\n", sys->mmcr0); + pr_debug("mmcr1_val inited to %016lx\n", sys->mmcr1); + + for (pmc = 0; pmc < cur_cpu_spec->num_pmcs; pmc++) { + /* counters are 40 bit. Move to cputable at some point? */ + reset_value[pmc] = (0x1UL << 39) - ctr[pmc].count; + pr_debug("reset_value for pmc%u inited to 0x%lx\n", + pmc, reset_value[pmc]); + } +} + +/* configure registers on this cpu */ +static void pa6t_cpu_setup(struct op_counter_config *ctr) +{ + u64 mmcr0 = mmcr0_val; + u64 mmcr1 = mmcr1_val; + + /* Default is all PMCs off */ + mmcr0 &= ~(0x3FUL); + mtspr(SPRN_PA6T_MMCR0, mmcr0); + + /* program selected programmable events in */ + mtspr(SPRN_PA6T_MMCR1, mmcr1); + + pr_debug("setup on cpu %d, mmcr0 %016lx\n", smp_processor_id(), + mfspr(SPRN_PA6T_MMCR0)); + pr_debug("setup on cpu %d, mmcr1 %016lx\n", smp_processor_id(), + mfspr(SPRN_PA6T_MMCR1)); +} + +static void pa6t_start(struct op_counter_config *ctr) +{ + int i; + + /* Hold off event counting until rfid */ + u64 mmcr0 = mmcr0_val | PA6T_MMCR0_HANDDIS; + + for (i = 0; i < cur_cpu_spec->num_pmcs; i++) + if (ctr[i].enabled) + ctr_write(i, reset_value[i]); + else + ctr_write(i, 0UL); + + mtspr(SPRN_PA6T_MMCR0, mmcr0); + + oprofile_running = 1; + + pr_debug("start on cpu %d, mmcr0 %lx\n", smp_processor_id(), mmcr0); +} + +static void pa6t_stop(void) +{ + u64 mmcr0; + + /* freeze counters */ + mmcr0 = mfspr(SPRN_PA6T_MMCR0); + mmcr0 |= PA6T_MMCR0_FCM0; + mtspr(SPRN_PA6T_MMCR0, mmcr0); + + oprofile_running = 0; + + pr_debug("stop on cpu %d, mmcr0 %lx\n", smp_processor_id(), mmcr0); +} + +/* handle the perfmon overflow vector */ +static void pa6t_handle_interrupt(struct pt_regs *regs, + struct op_counter_config *ctr) +{ + unsigned long pc = mfspr(SPRN_PA6T_SIAR); + int is_kernel = is_kernel_addr(pc); + u64 val; + int i; + u64 mmcr0; + + /* disable perfmon counting until rfid */ + mmcr0 = mfspr(SPRN_PA6T_MMCR0); + mtspr(SPRN_PA6T_MMCR0, mmcr0 | PA6T_MMCR0_HANDDIS); + + /* Record samples. We've got one global bit for whether a sample + * was taken, so add it for any counter that triggered overflow. + */ + for (i = 0; i < cur_cpu_spec->num_pmcs; i++) { + val = ctr_read(i); + if (val & (0x1UL << 39)) { /* Overflow bit set */ + if (oprofile_running && ctr[i].enabled) { + if (mmcr0 & PA6T_MMCR0_SIARLOG) + oprofile_add_ext_sample(pc, regs, i, is_kernel); + ctr_write(i, reset_value[i]); + } else { + ctr_write(i, 0UL); + } + } + } + + /* Restore mmcr0 to a good known value since the PMI changes it */ + mmcr0 = mmcr0_val | PA6T_MMCR0_HANDDIS; + mtspr(SPRN_PA6T_MMCR0, mmcr0); +} + +struct op_powerpc_model op_model_pa6t = { + .reg_setup = pa6t_reg_setup, + .cpu_setup = pa6t_cpu_setup, + .start = pa6t_start, + .stop = pa6t_stop, + .handle_interrupt = pa6t_handle_interrupt, +}; |
