summaryrefslogtreecommitdiffstats
path: root/arch/powerpc/oprofile/op_model_cell.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/powerpc/oprofile/op_model_cell.c')
-rw-r--r--arch/powerpc/oprofile/op_model_cell.c104
1 files changed, 63 insertions, 41 deletions
diff --git a/arch/powerpc/oprofile/op_model_cell.c b/arch/powerpc/oprofile/op_model_cell.c
index 2eb15f388103..8d4a9586464d 100644
--- a/arch/powerpc/oprofile/op_model_cell.c
+++ b/arch/powerpc/oprofile/op_model_cell.c
@@ -41,8 +41,12 @@
#define PPU_CYCLES_EVENT_NUM 1 /* event number for CYCLES */
#define CBE_COUNT_ALL_CYCLES 0x42800000 /* PPU cycle event specifier */
-#define NUM_THREADS 2
-#define VIRT_CNTR_SW_TIME_NS 100000000 // 0.5 seconds
+#define NUM_THREADS 2 /* number of physical threads in
+ * physical processor
+ */
+#define NUM_TRACE_BUS_WORDS 4
+#define NUM_INPUT_BUS_WORDS 2
+
struct pmc_cntrl_data {
unsigned long vcntr;
@@ -93,7 +97,6 @@ static struct {
u32 pm07_cntrl[NR_PHYS_CTRS];
} pm_regs;
-
#define GET_SUB_UNIT(x) ((x & 0x0000f000) >> 12)
#define GET_BUS_WORD(x) ((x & 0x000000f0) >> 4)
#define GET_BUS_TYPE(x) ((x & 0x00000300) >> 8)
@@ -101,7 +104,6 @@ static struct {
#define GET_COUNT_CYCLES(x) (x & 0x00000001)
#define GET_INPUT_CONTROL(x) ((x & 0x00000004) >> 2)
-
static DEFINE_PER_CPU(unsigned long[NR_PHYS_CTRS], pmc_values);
static struct pmc_cntrl_data pmc_cntrl[NUM_THREADS][NR_PHYS_CTRS];
@@ -129,8 +131,8 @@ static spinlock_t virt_cntr_lock = SPIN_LOCK_UNLOCKED;
static u32 ctr_enabled;
-static unsigned char trace_bus[4];
-static unsigned char input_bus[2];
+static unsigned char trace_bus[NUM_TRACE_BUS_WORDS];
+static unsigned char input_bus[NUM_INPUT_BUS_WORDS];
/*
* Firmware interface functions
@@ -183,7 +185,8 @@ static void pm_rtas_activate_signals(u32 node, u32 count)
for (j = 0; j < count; j++) {
/* fw expects physical cpu # */
pm_signal_local[j].cpu = node;
- pm_signal_local[j].signal_group = pm_signal[j].signal_group;
+ pm_signal_local[j].signal_group
+ = pm_signal[j].signal_group;
pm_signal_local[j].bus_word = pm_signal[j].bus_word;
pm_signal_local[j].sub_unit = pm_signal[j].sub_unit;
pm_signal_local[j].bit = pm_signal[j].bit;
@@ -232,13 +235,21 @@ static void set_pm_event(u32 ctr, int event, u32 unit_mask)
p->signal_group = event / 100;
p->bus_word = bus_word;
- p->sub_unit = unit_mask & 0x0000f000;
+ p->sub_unit = (unit_mask & 0x0000f000) >> 12;
pm_regs.pm07_cntrl[ctr] = 0;
pm_regs.pm07_cntrl[ctr] |= PM07_CTR_COUNT_CYCLES(count_cycles);
pm_regs.pm07_cntrl[ctr] |= PM07_CTR_POLARITY(polarity);
pm_regs.pm07_cntrl[ctr] |= PM07_CTR_INPUT_CONTROL(input_control);
+ /* Some of the islands signal selection is based on 64 bit words.
+ * The debug bus words are 32 bits, the input words to the performance
+ * counters are defined as 32 bits. Need to convert the 64 bit island
+ * specification to the appropriate 32 input bit and bus word for the
+ * performance counter event selection. See the CELL Performance
+ * monitoring signals manual and the Perf cntr hardware descriptions
+ * for the details.
+ */
if (input_control == 0) {
if (signal_bit > 31) {
signal_bit -= 32;
@@ -259,12 +270,12 @@ static void set_pm_event(u32 ctr, int event, u32 unit_mask)
p->bit = signal_bit;
}
- for (i = 0; i < 4; i++) {
+ for (i = 0; i < NUM_TRACE_BUS_WORDS; i++) {
if (bus_word & (1 << i)) {
pm_regs.debug_bus_control |=
(bus_type << (31 - (2 * i) + 1));
- for (j = 0; j < 2; j++) {
+ for (j = 0; j < NUM_INPUT_BUS_WORDS; j++) {
if (input_bus[j] == 0xff) {
input_bus[j] = i;
pm_regs.group_control |=
@@ -278,52 +289,58 @@ out:
;
}
-static void write_pm_cntrl(int cpu, struct pm_cntrl *pm_cntrl)
+static void write_pm_cntrl(int cpu)
{
- /* Oprofile will use 32 bit counters, set bits 7:10 to 0 */
+ /* Oprofile will use 32 bit counters, set bits 7:10 to 0
+ * pmregs.pm_cntrl is a global
+ */
+
u32 val = 0;
- if (pm_cntrl->enable == 1)
+ if (pm_regs.pm_cntrl.enable == 1)
val |= CBE_PM_ENABLE_PERF_MON;
- if (pm_cntrl->stop_at_max == 1)
+ if (pm_regs.pm_cntrl.stop_at_max == 1)
val |= CBE_PM_STOP_AT_MAX;
- if (pm_cntrl->trace_mode == 1)
- val |= CBE_PM_TRACE_MODE_SET(pm_cntrl->trace_mode);
+ if (pm_regs.pm_cntrl.trace_mode == 1)
+ val |= CBE_PM_TRACE_MODE_SET(pm_regs.pm_cntrl.trace_mode);
- if (pm_cntrl->freeze == 1)
+ if (pm_regs.pm_cntrl.freeze == 1)
val |= CBE_PM_FREEZE_ALL_CTRS;
/* Routine set_count_mode must be called previously to set
* the count mode based on the user selection of user and kernel.
*/
- val |= CBE_PM_COUNT_MODE_SET(pm_cntrl->count_mode);
+ val |= CBE_PM_COUNT_MODE_SET(pm_regs.pm_cntrl.count_mode);
cbe_write_pm(cpu, pm_control, val);
}
static inline void
-set_count_mode(u32 kernel, u32 user, struct pm_cntrl *pm_cntrl)
+set_count_mode(u32 kernel, u32 user)
{
/* The user must specify user and kernel if they want them. If
- * neither is specified, OProfile will count in hypervisor mode
+ * neither is specified, OProfile will count in hypervisor mode.
+ * pm_regs.pm_cntrl is a global
*/
if (kernel) {
if (user)
- pm_cntrl->count_mode = CBE_COUNT_ALL_MODES;
+ pm_regs.pm_cntrl.count_mode = CBE_COUNT_ALL_MODES;
else
- pm_cntrl->count_mode = CBE_COUNT_SUPERVISOR_MODE;
+ pm_regs.pm_cntrl.count_mode =
+ CBE_COUNT_SUPERVISOR_MODE;
} else {
if (user)
- pm_cntrl->count_mode = CBE_COUNT_PROBLEM_MODE;
+ pm_regs.pm_cntrl.count_mode = CBE_COUNT_PROBLEM_MODE;
else
- pm_cntrl->count_mode = CBE_COUNT_HYPERVISOR_MODE;
+ pm_regs.pm_cntrl.count_mode =
+ CBE_COUNT_HYPERVISOR_MODE;
}
}
static inline void enable_ctr(u32 cpu, u32 ctr, u32 * pm07_cntrl)
{
- pm07_cntrl[ctr] |= PM07_CTR_ENABLE(1);
+ pm07_cntrl[ctr] |= CBE_PM_CTR_ENABLE;
cbe_write_pm07_control(cpu, ctr, pm07_cntrl[ctr]);
}
@@ -365,6 +382,14 @@ static void cell_virtual_cntr(unsigned long data)
hdw_thread = 1 ^ hdw_thread;
next_hdw_thread = hdw_thread;
+ for (i = 0; i < num_counters; i++)
+ /* There are some per thread events. Must do the
+ * set event, for the thread that is being started
+ */
+ set_pm_event(i,
+ pmc_cntrl[next_hdw_thread][i].evnts,
+ pmc_cntrl[next_hdw_thread][i].masks);
+
/* The following is done only once per each node, but
* we need cpu #, not node #, to pass to the cbe_xxx functions.
*/
@@ -385,12 +410,13 @@ static void cell_virtual_cntr(unsigned long data)
== 0xFFFFFFFF)
/* If the cntr value is 0xffffffff, we must
* reset that to 0xfffffff0 when the current
- * thread is restarted. This will generate a new
- * interrupt and make sure that we never restore
- * the counters to the max value. If the counters
- * were restored to the max value, they do not
- * increment and no interrupts are generated. Hence
- * no more samples will be collected on that cpu.
+ * thread is restarted. This will generate a
+ * new interrupt and make sure that we never
+ * restore the counters to the max value. If
+ * the counters were restored to the max value,
+ * they do not increment and no interrupts are
+ * generated. Hence no more samples will be
+ * collected on that cpu.
*/
cbe_write_ctr(cpu, i, 0xFFFFFFF0);
else
@@ -410,9 +436,6 @@ static void cell_virtual_cntr(unsigned long data)
* Must do the set event, enable_cntr
* for each cpu.
*/
- set_pm_event(i,
- pmc_cntrl[next_hdw_thread][i].evnts,
- pmc_cntrl[next_hdw_thread][i].masks);
enable_ctr(cpu, i,
pm_regs.pm07_cntrl);
} else {
@@ -465,8 +488,7 @@ cell_reg_setup(struct op_counter_config *ctr,
pm_regs.pm_cntrl.trace_mode = 0;
pm_regs.pm_cntrl.freeze = 1;
- set_count_mode(sys->enable_kernel, sys->enable_user,
- &pm_regs.pm_cntrl);
+ set_count_mode(sys->enable_kernel, sys->enable_user);
/* Setup the thread 0 events */
for (i = 0; i < num_ctrs; ++i) {
@@ -498,10 +520,10 @@ cell_reg_setup(struct op_counter_config *ctr,
pmc_cntrl[1][i].vcntr = i;
}
- for (i = 0; i < 4; i++)
+ for (i = 0; i < NUM_TRACE_BUS_WORDS; i++)
trace_bus[i] = 0xff;
- for (i = 0; i < 2; i++)
+ for (i = 0; i < NUM_INPUT_BUS_WORDS; i++)
input_bus[i] = 0xff;
/* Our counters count up, and "count" refers to
@@ -560,7 +582,7 @@ static void cell_cpu_setup(struct op_counter_config *cntr)
cbe_write_pm(cpu, pm_start_stop, 0);
cbe_write_pm(cpu, group_control, pm_regs.group_control);
cbe_write_pm(cpu, debug_bus_control, pm_regs.debug_bus_control);
- write_pm_cntrl(cpu, &pm_regs.pm_cntrl);
+ write_pm_cntrl(cpu);
for (i = 0; i < num_counters; ++i) {
if (ctr_enabled & (1 << i)) {
@@ -602,7 +624,7 @@ static void cell_global_start(struct op_counter_config *ctr)
}
}
- cbe_clear_pm_interrupts(cpu);
+ cbe_get_and_clear_pm_interrupts(cpu);
cbe_enable_pm_interrupts(cpu, hdw_thread, interrupt_mask);
cbe_enable_pm(cpu);
}
@@ -672,7 +694,7 @@ cell_handle_interrupt(struct pt_regs *regs, struct op_counter_config *ctr)
cbe_disable_pm(cpu);
- interrupt_mask = cbe_clear_pm_interrupts(cpu);
+ interrupt_mask = cbe_get_and_clear_pm_interrupts(cpu);
/* If the interrupt mask has been cleared, then the virt cntr
* has cleared the interrupt. When the thread that generated
OpenPOWER on IntegriCloud