summaryrefslogtreecommitdiffstats
path: root/arch/powerpc/oprofile/cell/spu_profiler.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/powerpc/oprofile/cell/spu_profiler.c')
-rw-r--r--arch/powerpc/oprofile/cell/spu_profiler.c58
1 files changed, 44 insertions, 14 deletions
diff --git a/arch/powerpc/oprofile/cell/spu_profiler.c b/arch/powerpc/oprofile/cell/spu_profiler.c
index dd499c3e9da7..9305ddaac512 100644
--- a/arch/powerpc/oprofile/cell/spu_profiler.c
+++ b/arch/powerpc/oprofile/cell/spu_profiler.c
@@ -18,11 +18,21 @@
#include <asm/cell-pmu.h>
#include "pr_util.h"
-#define TRACE_ARRAY_SIZE 1024
#define SCALE_SHIFT 14
static u32 *samples;
+/* spu_prof_running is a flag used to indicate if spu profiling is enabled
+ * or not. It is set by the routines start_spu_profiling_cycles() and
+ * start_spu_profiling_events(). The flag is cleared by the routines
+ * stop_spu_profiling_cycles() and stop_spu_profiling_events(). These
+ * routines are called via global_start() and global_stop() which are called in
+ * op_powerpc_start() and op_powerpc_stop(). These routines are called once
+ * per system as a result of the user starting/stopping oprofile. Hence, only
+ * one CPU per user at a time will be changing the value of spu_prof_running.
+ * In general, OProfile does not protect against multiple users trying to run
+ * OProfile at a time.
+ */
int spu_prof_running;
static unsigned int profiling_interval;
@@ -31,8 +41,8 @@ static unsigned int profiling_interval;
#define SPU_PC_MASK 0xFFFF
-static DEFINE_SPINLOCK(sample_array_lock);
-unsigned long sample_array_lock_flags;
+DEFINE_SPINLOCK(oprof_spu_smpl_arry_lck);
+unsigned long oprof_spu_smpl_arry_lck_flags;
void set_spu_profiling_frequency(unsigned int freq_khz, unsigned int cycles_reset)
{
@@ -49,7 +59,7 @@ void set_spu_profiling_frequency(unsigned int freq_khz, unsigned int cycles_rese
* of precision. This is close enough for the purpose at hand.
*
* The value of the timeout should be small enough that the hw
- * trace buffer will not get more then about 1/3 full for the
+ * trace buffer will not get more than about 1/3 full for the
* maximum user specified (the LFSR value) hw sampling frequency.
* This is to ensure the trace buffer will never fill even if the
* kernel thread scheduling varies under a heavy system load.
@@ -145,13 +155,13 @@ static enum hrtimer_restart profile_spus(struct hrtimer *timer)
* sample array must be loaded and then processed for a given
* cpu. The sample array is not per cpu.
*/
- spin_lock_irqsave(&sample_array_lock,
- sample_array_lock_flags);
+ spin_lock_irqsave(&oprof_spu_smpl_arry_lck,
+ oprof_spu_smpl_arry_lck_flags);
num_samples = cell_spu_pc_collection(cpu);
if (num_samples == 0) {
- spin_unlock_irqrestore(&sample_array_lock,
- sample_array_lock_flags);
+ spin_unlock_irqrestore(&oprof_spu_smpl_arry_lck,
+ oprof_spu_smpl_arry_lck_flags);
continue;
}
@@ -162,8 +172,8 @@ static enum hrtimer_restart profile_spus(struct hrtimer *timer)
num_samples);
}
- spin_unlock_irqrestore(&sample_array_lock,
- sample_array_lock_flags);
+ spin_unlock_irqrestore(&oprof_spu_smpl_arry_lck,
+ oprof_spu_smpl_arry_lck_flags);
}
smp_wmb(); /* insure spu event buffer updates are written */
@@ -182,13 +192,13 @@ static enum hrtimer_restart profile_spus(struct hrtimer *timer)
static struct hrtimer timer;
/*
- * Entry point for SPU profiling.
+ * Entry point for SPU cycle profiling.
* NOTE: SPU profiling is done system-wide, not per-CPU.
*
* cycles_reset is the count value specified by the user when
* setting up OProfile to count SPU_CYCLES.
*/
-int start_spu_profiling(unsigned int cycles_reset)
+int start_spu_profiling_cycles(unsigned int cycles_reset)
{
ktime_t kt;
@@ -212,10 +222,30 @@ int start_spu_profiling(unsigned int cycles_reset)
return 0;
}
-void stop_spu_profiling(void)
+/*
+ * Entry point for SPU event profiling.
+ * NOTE: SPU profiling is done system-wide, not per-CPU.
+ *
+ * cycles_reset is the count value specified by the user when
+ * setting up OProfile to count SPU_CYCLES.
+ */
+void start_spu_profiling_events(void)
+{
+ spu_prof_running = 1;
+ schedule_delayed_work(&spu_work, DEFAULT_TIMER_EXPIRE);
+
+ return;
+}
+
+void stop_spu_profiling_cycles(void)
{
spu_prof_running = 0;
hrtimer_cancel(&timer);
kfree(samples);
- pr_debug("SPU_PROF: stop_spu_profiling issued\n");
+ pr_debug("SPU_PROF: stop_spu_profiling_cycles issued\n");
+}
+
+void stop_spu_profiling_events(void)
+{
+ spu_prof_running = 0;
}
OpenPOWER on IntegriCloud