summaryrefslogtreecommitdiffstats
path: root/arch/powerpc/kvm/book3s_hv_rmhandlers.S
diff options
context:
space:
mode:
Diffstat (limited to 'arch/powerpc/kvm/book3s_hv_rmhandlers.S')
-rw-r--r--arch/powerpc/kvm/book3s_hv_rmhandlers.S142
1 files changed, 81 insertions, 61 deletions
diff --git a/arch/powerpc/kvm/book3s_hv_rmhandlers.S b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
index 74a24bbb9637..10b6c358dd77 100644
--- a/arch/powerpc/kvm/book3s_hv_rmhandlers.S
+++ b/arch/powerpc/kvm/book3s_hv_rmhandlers.S
@@ -27,6 +27,7 @@
#include <asm/asm-offsets.h>
#include <asm/exception-64s.h>
#include <asm/kvm_book3s_asm.h>
+#include <asm/mmu-hash64.h>
/*****************************************************************************
* *
@@ -134,8 +135,11 @@ kvm_start_guest:
27: /* XXX should handle hypervisor maintenance interrupts etc. here */
+ /* reload vcpu pointer after clearing the IPI */
+ ld r4,HSTATE_KVM_VCPU(r13)
+ cmpdi r4,0
/* if we have no vcpu to run, go back to sleep */
- beq cr1,kvm_no_guest
+ beq kvm_no_guest
/* were we napping due to cede? */
lbz r0,HSTATE_NAPPING(r13)
@@ -310,7 +314,33 @@ END_FTR_SECTION_IFSET(CPU_FTR_ARCH_201)
mtspr SPRN_SDR1,r6 /* switch to partition page table */
mtspr SPRN_LPID,r7
isync
+
+ /* See if we need to flush the TLB */
+ lhz r6,PACAPACAINDEX(r13) /* test_bit(cpu, need_tlb_flush) */
+ clrldi r7,r6,64-6 /* extract bit number (6 bits) */
+ srdi r6,r6,6 /* doubleword number */
+ sldi r6,r6,3 /* address offset */
+ add r6,r6,r9
+ addi r6,r6,KVM_NEED_FLUSH /* dword in kvm->arch.need_tlb_flush */
li r0,1
+ sld r0,r0,r7
+ ld r7,0(r6)
+ and. r7,r7,r0
+ beq 22f
+23: ldarx r7,0,r6 /* if set, clear the bit */
+ andc r7,r7,r0
+ stdcx. r7,0,r6
+ bne 23b
+ li r6,128 /* and flush the TLB */
+ mtctr r6
+ li r7,0x800 /* IS field = 0b10 */
+ ptesync
+28: tlbiel r7
+ addi r7,r7,0x1000
+ bdnz 28b
+ ptesync
+
+22: li r0,1
stb r0,VCORE_IN_GUEST(r5) /* signal secondaries to continue */
b 10f
@@ -333,36 +363,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_ARCH_201)
mr r9,r4
blt hdec_soon
- /*
- * Invalidate the TLB if we could possibly have stale TLB
- * entries for this partition on this core due to the use
- * of tlbiel.
- * XXX maybe only need this on primary thread?
- */
- ld r9,VCPU_KVM(r4) /* pointer to struct kvm */
- lwz r5,VCPU_VCPUID(r4)
- lhz r6,PACAPACAINDEX(r13)
- rldimi r6,r5,0,62 /* XXX map as if threads 1:1 p:v */
- lhz r8,VCPU_LAST_CPU(r4)
- sldi r7,r6,1 /* see if this is the same vcpu */
- add r7,r7,r9 /* as last ran on this pcpu */
- lhz r0,KVM_LAST_VCPU(r7)
- cmpw r6,r8 /* on the same cpu core as last time? */
- bne 3f
- cmpw r0,r5 /* same vcpu as this core last ran? */
- beq 1f
-3: sth r6,VCPU_LAST_CPU(r4) /* if not, invalidate partition TLB */
- sth r5,KVM_LAST_VCPU(r7)
- li r6,128
- mtctr r6
- li r7,0x800 /* IS field = 0b10 */
- ptesync
-2: tlbiel r7
- addi r7,r7,0x1000
- bdnz 2b
- ptesync
-1:
-
/* Save purr/spurr */
mfspr r5,SPRN_PURR
mfspr r6,SPRN_SPURR
@@ -679,8 +679,7 @@ BEGIN_FTR_SECTION
1:
END_FTR_SECTION_IFSET(CPU_FTR_ARCH_206)
-nohpte_cont:
-hcall_real_cont: /* r9 = vcpu, r12 = trap, r13 = paca */
+guest_exit_cont: /* r9 = vcpu, r12 = trap, r13 = paca */
/* Save DEC */
mfspr r5,SPRN_DEC
mftb r6
@@ -701,6 +700,11 @@ END_FTR_SECTION_IFSET(CPU_FTR_ARCH_206)
std r6, VCPU_FAULT_DAR(r9)
stw r7, VCPU_FAULT_DSISR(r9)
+ /* See if it is a machine check */
+ cmpwi r12, BOOK3S_INTERRUPT_MACHINE_CHECK
+ beq machine_check_realmode
+mc_cont:
+
/* Save guest CTRL register, set runlatch to 1 */
6: mfspr r6,SPRN_CTRLF
stw r6,VCPU_CTRL(r9)
@@ -1113,38 +1117,41 @@ END_FTR_SECTION_IFSET(CPU_FTR_ARCH_201)
/*
* For external and machine check interrupts, we need
* to call the Linux handler to process the interrupt.
- * We do that by jumping to the interrupt vector address
- * which we have in r12. The [h]rfid at the end of the
+ * We do that by jumping to absolute address 0x500 for
+ * external interrupts, or the machine_check_fwnmi label
+ * for machine checks (since firmware might have patched
+ * the vector area at 0x200). The [h]rfid at the end of the
* handler will return to the book3s_hv_interrupts.S code.
* For other interrupts we do the rfid to get back
- * to the book3s_interrupts.S code here.
+ * to the book3s_hv_interrupts.S code here.
*/
ld r8, HSTATE_VMHANDLER(r13)
ld r7, HSTATE_HOST_MSR(r13)
+ cmpwi cr1, r12, BOOK3S_INTERRUPT_MACHINE_CHECK
cmpwi r12, BOOK3S_INTERRUPT_EXTERNAL
+BEGIN_FTR_SECTION
beq 11f
- cmpwi r12, BOOK3S_INTERRUPT_MACHINE_CHECK
+END_FTR_SECTION_IFSET(CPU_FTR_ARCH_206)
/* RFI into the highmem handler, or branch to interrupt handler */
-12: mfmsr r6
- mtctr r12
+ mfmsr r6
li r0, MSR_RI
andc r6, r6, r0
mtmsrd r6, 1 /* Clear RI in MSR */
mtsrr0 r8
mtsrr1 r7
- beqctr
+ beqa 0x500 /* external interrupt (PPC970) */
+ beq cr1, 13f /* machine check */
RFI
-11:
-BEGIN_FTR_SECTION
- b 12b
-END_FTR_SECTION_IFSET(CPU_FTR_ARCH_201)
- mtspr SPRN_HSRR0, r8
+ /* On POWER7, we have external interrupts set to use HSRR0/1 */
+11: mtspr SPRN_HSRR0, r8
mtspr SPRN_HSRR1, r7
ba 0x500
+13: b machine_check_fwnmi
+
/*
* Check whether an HDSI is an HPTE not found fault or something else.
* If it is an HPTE not found fault that is due to the guest accessing
@@ -1177,7 +1184,7 @@ kvmppc_hdsi:
cmpdi r3, 0 /* retry the instruction */
beq 6f
cmpdi r3, -1 /* handle in kernel mode */
- beq nohpte_cont
+ beq guest_exit_cont
cmpdi r3, -2 /* MMIO emulation; need instr word */
beq 2f
@@ -1191,6 +1198,7 @@ kvmppc_hdsi:
li r10, BOOK3S_INTERRUPT_DATA_STORAGE
li r11, (MSR_ME << 1) | 1 /* synthesize MSR_SF | MSR_ME */
rotldi r11, r11, 63
+fast_interrupt_c_return:
6: ld r7, VCPU_CTR(r9)
lwz r8, VCPU_XER(r9)
mtctr r7
@@ -1223,7 +1231,7 @@ kvmppc_hdsi:
/* Unset guest mode. */
li r0, KVM_GUEST_MODE_NONE
stb r0, HSTATE_IN_GUEST(r13)
- b nohpte_cont
+ b guest_exit_cont
/*
* Similarly for an HISI, reflect it to the guest as an ISI unless
@@ -1249,9 +1257,9 @@ kvmppc_hisi:
ld r11, VCPU_MSR(r9)
li r12, BOOK3S_INTERRUPT_H_INST_STORAGE
cmpdi r3, 0 /* retry the instruction */
- beq 6f
+ beq fast_interrupt_c_return
cmpdi r3, -1 /* handle in kernel mode */
- beq nohpte_cont
+ beq guest_exit_cont
/* Synthesize an ISI for the guest */
mr r11, r3
@@ -1260,12 +1268,7 @@ kvmppc_hisi:
li r10, BOOK3S_INTERRUPT_INST_STORAGE
li r11, (MSR_ME << 1) | 1 /* synthesize MSR_SF | MSR_ME */
rotldi r11, r11, 63
-6: ld r7, VCPU_CTR(r9)
- lwz r8, VCPU_XER(r9)
- mtctr r7
- mtxer r8
- mr r4, r9
- b fast_guest_return
+ b fast_interrupt_c_return
3: ld r6, VCPU_KVM(r9) /* not relocated, use VRMA */
ld r5, KVM_VRMA_SLB_V(r6)
@@ -1281,14 +1284,14 @@ kvmppc_hisi:
hcall_try_real_mode:
ld r3,VCPU_GPR(R3)(r9)
andi. r0,r11,MSR_PR
- bne hcall_real_cont
+ bne guest_exit_cont
clrrdi r3,r3,2
cmpldi r3,hcall_real_table_end - hcall_real_table
- bge hcall_real_cont
+ bge guest_exit_cont
LOAD_REG_ADDR(r4, hcall_real_table)
lwzx r3,r3,r4
cmpwi r3,0
- beq hcall_real_cont
+ beq guest_exit_cont
add r3,r3,r4
mtctr r3
mr r3,r9 /* get vcpu pointer */
@@ -1309,7 +1312,7 @@ hcall_real_fallback:
li r12,BOOK3S_INTERRUPT_SYSCALL
ld r9, HSTATE_KVM_VCPU(r13)
- b hcall_real_cont
+ b guest_exit_cont
.globl hcall_real_table
hcall_real_table:
@@ -1568,6 +1571,21 @@ kvm_cede_exit:
li r3,H_TOO_HARD
blr
+ /* Try to handle a machine check in real mode */
+machine_check_realmode:
+ mr r3, r9 /* get vcpu pointer */
+ bl .kvmppc_realmode_machine_check
+ nop
+ cmpdi r3, 0 /* continue exiting from guest? */
+ ld r9, HSTATE_KVM_VCPU(r13)
+ li r12, BOOK3S_INTERRUPT_MACHINE_CHECK
+ beq mc_cont
+ /* If not, deliver a machine check. SRR0/1 are already set */
+ li r10, BOOK3S_INTERRUPT_MACHINE_CHECK
+ li r11, (MSR_ME << 1) | 1 /* synthesize MSR_SF | MSR_ME */
+ rotldi r11, r11, 63
+ b fast_interrupt_c_return
+
secondary_too_late:
ld r5,HSTATE_KVM_VCORE(r13)
HMT_LOW
@@ -1587,6 +1605,10 @@ secondary_too_late:
.endr
secondary_nap:
+ /* Clear our vcpu pointer so we don't come back in early */
+ li r0, 0
+ std r0, HSTATE_KVM_VCPU(r13)
+ lwsync
/* Clear any pending IPI - assume we're a secondary thread */
ld r5, HSTATE_XICS_PHYS(r13)
li r7, XICS_XIRR
@@ -1612,8 +1634,6 @@ secondary_nap:
kvm_no_guest:
li r0, KVM_HWTHREAD_IN_NAP
stb r0, HSTATE_HWTHREAD_STATE(r13)
- li r0, 0
- std r0, HSTATE_KVM_VCPU(r13)
li r3, LPCR_PECE0
mfspr r4, SPRN_LPCR
OpenPOWER on IntegriCloud