diff options
Diffstat (limited to 'arch/powerpc/boot')
24 files changed, 1053 insertions, 162 deletions
diff --git a/arch/powerpc/boot/.gitignore b/arch/powerpc/boot/.gitignore index 554734ff302e..d61c03525777 100644 --- a/arch/powerpc/boot/.gitignore +++ b/arch/powerpc/boot/.gitignore @@ -16,6 +16,7 @@ mktree uImage cuImage.* dtbImage.* +*.dtb treeImage.* zImage zImage.initrd diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile index ca7f08cc4afd..90e9d9548660 100644 --- a/arch/powerpc/boot/Makefile +++ b/arch/powerpc/boot/Makefile @@ -71,9 +71,9 @@ src-wlib-y := string.S crt0.S crtsavres.S stdio.c main.c \ uartlite.c mpc52xx-psc.c src-wlib-$(CONFIG_40x) += 4xx.c planetcore.c src-wlib-$(CONFIG_44x) += 4xx.c ebony.c bamboo.c -src-wlib-$(CONFIG_8xx) += mpc8xx.c planetcore.c +src-wlib-$(CONFIG_8xx) += mpc8xx.c planetcore.c fsl-soc.c src-wlib-$(CONFIG_PPC_82xx) += pq2.c fsl-soc.c planetcore.c -src-wlib-$(CONFIG_EMBEDDED6xx) += mv64x60.c mv64x60_i2c.c ugecon.c +src-wlib-$(CONFIG_EMBEDDED6xx) += mv64x60.c mv64x60_i2c.c ugecon.c fsl-soc.c src-plat-y := of.c epapr.c src-plat-$(CONFIG_40x) += fixed-head.S ep405.c cuboot-hotfoot.c \ @@ -95,7 +95,7 @@ src-plat-$(CONFIG_FSL_SOC_BOOKE) += cuboot-85xx.c cuboot-85xx-cpm2.c src-plat-$(CONFIG_EMBEDDED6xx) += cuboot-pq2.c cuboot-mpc7448hpc2.c \ cuboot-c2k.c gamecube-head.S \ gamecube.c wii-head.S wii.c holly.c \ - prpmc2800.c + prpmc2800.c fixed-head.S mvme5100.c src-plat-$(CONFIG_AMIGAONE) += cuboot-amigaone.c src-plat-$(CONFIG_PPC_PS3) += ps3-head.S ps3-hvcall.S ps3.c src-plat-$(CONFIG_EPAPR_BOOT) += epapr.c epapr-wrapper.c @@ -286,6 +286,7 @@ image-$(CONFIG_MPC7448HPC2) += cuImage.mpc7448hpc2 image-$(CONFIG_PPC_C2K) += cuImage.c2k image-$(CONFIG_GAMECUBE) += dtbImage.gamecube image-$(CONFIG_WII) += dtbImage.wii +image-$(CONFIG_MVME5100) += dtbImage.mvme5100 # Board port in arch/powerpc/platform/amigaone/Kconfig image-$(CONFIG_AMIGAONE) += cuImage.amigaone diff --git a/arch/powerpc/boot/dts/fsl/elo3-dma-2.dtsi b/arch/powerpc/boot/dts/fsl/elo3-dma-2.dtsi new file mode 100644 index 000000000000..d3cc8d0f7c25 --- /dev/null +++ b/arch/powerpc/boot/dts/fsl/elo3-dma-2.dtsi @@ -0,0 +1,82 @@ +/* + * QorIQ Elo3 DMA device tree stub [ controller @ offset 0x102300 ] + * + * Copyright 2013 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +dma2: dma@102300 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,elo3-dma"; + reg = <0x102300 0x4>, + <0x102600 0x4>; + ranges = <0x0 0x102100 0x500>; + dma-channel@0 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x0 0x80>; + interrupts = <464 2 0 0>; + }; + dma-channel@80 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x80 0x80>; + interrupts = <465 2 0 0>; + }; + dma-channel@100 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x100 0x80>; + interrupts = <466 2 0 0>; + }; + dma-channel@180 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x180 0x80>; + interrupts = <467 2 0 0>; + }; + dma-channel@300 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x300 0x80>; + interrupts = <468 2 0 0>; + }; + dma-channel@380 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x380 0x80>; + interrupts = <469 2 0 0>; + }; + dma-channel@400 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x400 0x80>; + interrupts = <470 2 0 0>; + }; + dma-channel@480 { + compatible = "fsl,eloplus-dma-channel"; + reg = <0x480 0x80>; + interrupts = <471 2 0 0>; + }; +}; diff --git a/arch/powerpc/boot/dts/fsl/p1020si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1020si-post.dtsi index 68cc5e7f6477..642dc3a83d0e 100644 --- a/arch/powerpc/boot/dts/fsl/p1020si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p1020si-post.dtsi @@ -36,7 +36,8 @@ #address-cells = <2>; #size-cells = <1>; compatible = "fsl,p1020-elbc", "fsl,elbc", "simple-bus"; - interrupts = <19 2 0 0>; + interrupts = <19 2 0 0>, + <16 2 0 0>; }; /* controller at 0x9000 */ diff --git a/arch/powerpc/boot/dts/fsl/p1021si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1021si-post.dtsi index adb82fd9057f..407cb5fd0f5b 100644 --- a/arch/powerpc/boot/dts/fsl/p1021si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p1021si-post.dtsi @@ -36,7 +36,8 @@ #address-cells = <2>; #size-cells = <1>; compatible = "fsl,p1021-elbc", "fsl,elbc", "simple-bus"; - interrupts = <19 2 0 0>; + interrupts = <19 2 0 0>, + <16 2 0 0>; }; /* controller at 0x9000 */ diff --git a/arch/powerpc/boot/dts/fsl/p1022si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1022si-post.dtsi index e179803a81ef..ebf202234549 100644 --- a/arch/powerpc/boot/dts/fsl/p1022si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p1022si-post.dtsi @@ -40,7 +40,8 @@ * pin muxing when the DIU is enabled. */ compatible = "fsl,p1022-elbc", "fsl,elbc"; - interrupts = <19 2 0 0>; + interrupts = <19 2 0 0>, + <16 2 0 0>; }; /* controller at 0x9000 */ diff --git a/arch/powerpc/boot/dts/fsl/p1023si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1023si-post.dtsi index f1105bffa915..81437fdf1db4 100644 --- a/arch/powerpc/boot/dts/fsl/p1023si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p1023si-post.dtsi @@ -36,7 +36,8 @@ #address-cells = <2>; #size-cells = <1>; compatible = "fsl,p1023-elbc", "fsl,elbc", "simple-bus"; - interrupts = <19 2 0 0>; + interrupts = <19 2 0 0>, + <16 2 0 0>; }; /* controller at 0xa000 */ diff --git a/arch/powerpc/boot/dts/kilauea.dts b/arch/powerpc/boot/dts/kilauea.dts index 1613d6e4049e..5ba7f01e2a29 100644 --- a/arch/powerpc/boot/dts/kilauea.dts +++ b/arch/powerpc/boot/dts/kilauea.dts @@ -406,7 +406,7 @@ MSI: ppc4xx-msi@C10000000 { compatible = "amcc,ppc4xx-msi", "ppc4xx-msi"; - reg = < 0x0 0xEF620000 0x100>; + reg = <0xEF620000 0x100>; sdr-base = <0x4B0>; msi-data = <0x00000000>; msi-mask = <0x44440000>; diff --git a/arch/powerpc/boot/dts/mvme5100.dts b/arch/powerpc/boot/dts/mvme5100.dts new file mode 100644 index 000000000000..1ecb341a232a --- /dev/null +++ b/arch/powerpc/boot/dts/mvme5100.dts @@ -0,0 +1,185 @@ +/* + * Device Tree Source for Motorola/Emerson MVME5100. + * + * Copyright 2013 CSC Australia Pty. Ltd. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + */ + +/dts-v1/; + +/ { + model = "MVME5100"; + compatible = "MVME5100"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + serial0 = &serial0; + pci0 = &pci0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,7410 { + device_type = "cpu"; + reg = <0x0>; + /* Following required by dtc but not used */ + d-cache-line-size = <32>; + i-cache-line-size = <32>; + i-cache-size = <32768>; + d-cache-size = <32768>; + timebase-frequency = <25000000>; + clock-frequency = <500000000>; + bus-frequency = <100000000>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x20000000>; + }; + + hawk@fef80000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "hawk-bridge", "simple-bus"; + ranges = <0x0 0xfef80000 0x10000>; + reg = <0xfef80000 0x10000>; + + serial0: serial@8000 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0x8000 0x80>; + reg-shift = <4>; + clock-frequency = <1843200>; + current-speed = <9600>; + interrupts = <1 1>; // IRQ1 Level Active Low. + interrupt-parent = <&mpic>; + }; + + serial1: serial@8200 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0x8200 0x80>; + reg-shift = <4>; + clock-frequency = <1843200>; + current-speed = <9600>; + interrupts = <1 1>; // IRQ1 Level Active Low. + interrupt-parent = <&mpic>; + }; + + mpic: interrupt-controller@f3f80000 { + #interrupt-cells = <2>; + #address-cells = <0>; + device_type = "open-pic"; + compatible = "chrp,open-pic"; + interrupt-controller; + reg = <0xf3f80000 0x40000>; + }; + }; + + pci0: pci@feff0000 { + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + compatible = "hawk-pci"; + reg = <0xfec00000 0x400000>; + 8259-interrupt-acknowledge = <0xfeff0030>; + ranges = <0x1000000 0x0 0x0 0xfe000000 0x0 0x800000 + 0x2000000 0x0 0x80000000 0x80000000 0x0 0x74000000>; + bus-range = <0 255>; + clock-frequency = <33333333>; + interrupt-parent = <&mpic>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + + /* + * This definition (IDSEL 11) duplicates the + * interrupts definition in the i8259 + * interrupt controller below. + * + * Do not change the interrupt sense/polarity from + * 0x2 to anything else, doing so will cause endless + * "spurious" i8259 interrupts to be fielded. + */ + // IDSEL 11 - iPMC712 PCI/ISA Bridge + 0x5800 0x0 0x0 0x1 &mpic 0x0 0x2 + 0x5800 0x0 0x0 0x2 &mpic 0x0 0x2 + 0x5800 0x0 0x0 0x3 &mpic 0x0 0x2 + 0x5800 0x0 0x0 0x4 &mpic 0x0 0x2 + + /* IDSEL 12 - Not Used */ + + /* IDSEL 13 - Universe VME Bridge */ + 0x6800 0x0 0x0 0x1 &mpic 0x5 0x1 + 0x6800 0x0 0x0 0x2 &mpic 0x6 0x1 + 0x6800 0x0 0x0 0x3 &mpic 0x7 0x1 + 0x6800 0x0 0x0 0x4 &mpic 0x8 0x1 + + /* IDSEL 14 - ENET 1 */ + 0x7000 0x0 0x0 0x1 &mpic 0x2 0x1 + + /* IDSEL 15 - Not Used */ + + /* IDSEL 16 - PMC Slot 1 */ + 0x8000 0x0 0x0 0x1 &mpic 0x9 0x1 + 0x8000 0x0 0x0 0x2 &mpic 0xa 0x1 + 0x8000 0x0 0x0 0x3 &mpic 0xb 0x1 + 0x8000 0x0 0x0 0x4 &mpic 0xc 0x1 + + /* IDSEL 17 - PMC Slot 2 */ + 0x8800 0x0 0x0 0x1 &mpic 0xc 0x1 + 0x8800 0x0 0x0 0x2 &mpic 0x9 0x1 + 0x8800 0x0 0x0 0x3 &mpic 0xa 0x1 + 0x8800 0x0 0x0 0x4 &mpic 0xb 0x1 + + /* IDSEL 18 - Not Used */ + + /* IDSEL 19 - ENET 2 */ + 0x9800 0x0 0x0 0x1 &mpic 0xd 0x1 + + /* IDSEL 20 - PMCSPAN (PCI-X) */ + 0xa000 0x0 0x0 0x1 &mpic 0x9 0x1 + 0xa000 0x0 0x0 0x2 &mpic 0xa 0x1 + 0xa000 0x0 0x0 0x3 &mpic 0xb 0x1 + 0xa000 0x0 0x0 0x4 &mpic 0xc 0x1 + + >; + + isa { + #address-cells = <2>; + #size-cells = <1>; + #interrupt-cells = <2>; + device_type = "isa"; + compatible = "isa"; + ranges = <0x00000001 0 0x01000000 0 0x00000000 0x00001000>; + interrupt-parent = <&i8259>; + + i8259: interrupt-controller@20 { + #interrupt-cells = <2>; + #address-cells = <0>; + interrupts = <0 2>; + device_type = "interrupt-controller"; + compatible = "chrp,iic"; + interrupt-controller; + reg = <1 0x00000020 0x00000002 + 1 0x000000a0 0x00000002 + 1 0x000004d0 0x00000002>; + interrupt-parent = <&mpic>; + }; + + }; + + }; + + chosen { + linux,stdout-path = &serial0; + }; + +}; diff --git a/arch/powerpc/boot/dts/p1010rdb-pa.dts b/arch/powerpc/boot/dts/p1010rdb-pa.dts new file mode 100644 index 000000000000..767d4c032857 --- /dev/null +++ b/arch/powerpc/boot/dts/p1010rdb-pa.dts @@ -0,0 +1,23 @@ +/* + * P1010 RDB Device Tree Source + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/include/ "fsl/p1010si-pre.dtsi" + +/ { + model = "fsl,P1010RDB"; + compatible = "fsl,P1010RDB"; + + /include/ "p1010rdb_32b.dtsi" +}; + +/include/ "p1010rdb.dtsi" +/include/ "p1010rdb-pa.dtsi" +/include/ "fsl/p1010si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p1010rdb-pa.dtsi b/arch/powerpc/boot/dts/p1010rdb-pa.dtsi new file mode 100644 index 000000000000..434fb2d58575 --- /dev/null +++ b/arch/powerpc/boot/dts/p1010rdb-pa.dtsi @@ -0,0 +1,85 @@ +/* + * P1010 RDB Device Tree Source stub (no addresses or top-level ranges) + * + * Copyright 2013 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&ifc_nand { + partition@0 { + /* This location must not be altered */ + /* 1MB for u-boot Bootloader Image */ + reg = <0x0 0x00100000>; + label = "NAND U-Boot Image"; + read-only; + }; + + partition@100000 { + /* 1MB for DTB Image */ + reg = <0x00100000 0x00100000>; + label = "NAND DTB Image"; + }; + + partition@200000 { + /* 4MB for Linux Kernel Image */ + reg = <0x00200000 0x00400000>; + label = "NAND Linux Kernel Image"; + }; + + partition@600000 { + /* 4MB for Compressed Root file System Image */ + reg = <0x00600000 0x00400000>; + label = "NAND Compressed RFS Image"; + }; + + partition@a00000 { + /* 15MB for JFFS2 based Root file System */ + reg = <0x00a00000 0x00f00000>; + label = "NAND JFFS2 Root File System"; + }; + + partition@1900000 { + /* 7MB for User Area */ + reg = <0x01900000 0x00700000>; + label = "NAND User area"; + }; +}; + +&phy0 { + interrupts = <1 1 0 0>; +}; + +&phy1 { + interrupts = <2 1 0 0>; +}; + +&phy2 { + interrupts = <4 1 0 0>; +}; diff --git a/arch/powerpc/boot/dts/p1010rdb_36b.dts b/arch/powerpc/boot/dts/p1010rdb-pa_36b.dts index 64776f4a4651..3033371bc007 100644 --- a/arch/powerpc/boot/dts/p1010rdb_36b.dts +++ b/arch/powerpc/boot/dts/p1010rdb-pa_36b.dts @@ -38,52 +38,9 @@ model = "fsl,P1010RDB"; compatible = "fsl,P1010RDB"; - memory { - device_type = "memory"; - }; - - board_ifc: ifc: ifc@fffe1e000 { - /* NOR, NAND Flashes and CPLD on board */ - ranges = <0x0 0x0 0xf 0xee000000 0x02000000 - 0x1 0x0 0xf 0xff800000 0x00010000 - 0x3 0x0 0xf 0xffb00000 0x00000020>; - reg = <0xf 0xffe1e000 0 0x2000>; - }; - - board_soc: soc: soc@fffe00000 { - ranges = <0x0 0xf 0xffe00000 0x100000>; - }; - - pci0: pcie@fffe09000 { - reg = <0xf 0xffe09000 0 0x1000>; - ranges = <0x2000000 0x0 0xc0000000 0xc 0x20000000 0x0 0x20000000 - 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>; - pcie@0 { - ranges = <0x2000000 0x0 0xc0000000 - 0x2000000 0x0 0xc0000000 - 0x0 0x20000000 - - 0x1000000 0x0 0x0 - 0x1000000 0x0 0x0 - 0x0 0x100000>; - }; - }; - - pci1: pcie@fffe0a000 { - reg = <0xf 0xffe0a000 0 0x1000>; - ranges = <0x2000000 0x0 0xc0000000 0xc 0x20000000 0x0 0x20000000 - 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>; - pcie@0 { - ranges = <0x2000000 0x0 0xc0000000 - 0x2000000 0x0 0xc0000000 - 0x0 0x20000000 - - 0x1000000 0x0 0x0 - 0x1000000 0x0 0x0 - 0x0 0x100000>; - }; - }; + /include/ "p1010rdb_36b.dtsi" }; /include/ "p1010rdb.dtsi" +/include/ "p1010rdb-pa.dtsi" /include/ "fsl/p1010si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p1010rdb-pb.dts b/arch/powerpc/boot/dts/p1010rdb-pb.dts new file mode 100644 index 000000000000..6eeb7d3185be --- /dev/null +++ b/arch/powerpc/boot/dts/p1010rdb-pb.dts @@ -0,0 +1,35 @@ +/* + * P1010 RDB Device Tree Source + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/include/ "fsl/p1010si-pre.dtsi" + +/ { + model = "fsl,P1010RDB-PB"; + compatible = "fsl,P1010RDB-PB"; + + /include/ "p1010rdb_32b.dtsi" +}; + +/include/ "p1010rdb.dtsi" + +&phy0 { + interrupts = <0 1 0 0>; +}; + +&phy1 { + interrupts = <2 1 0 0>; +}; + +&phy2 { + interrupts = <1 1 0 0>; +}; + +/include/ "fsl/p1010si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p1010rdb-pb_36b.dts b/arch/powerpc/boot/dts/p1010rdb-pb_36b.dts new file mode 100644 index 000000000000..7ab3c907b326 --- /dev/null +++ b/arch/powerpc/boot/dts/p1010rdb-pb_36b.dts @@ -0,0 +1,58 @@ +/* + * P1010 RDB Device Tree Source (36-bit address map) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "fsl/p1010si-pre.dtsi" + +/ { + model = "fsl,P1010RDB-PB"; + compatible = "fsl,P1010RDB-PB"; + + /include/ "p1010rdb_36b.dtsi" +}; + +/include/ "p1010rdb.dtsi" + +&phy0 { + interrupts = <0 1 0 0>; +}; + +&phy1 { + interrupts = <2 1 0 0>; +}; + +&phy2 { + interrupts = <1 1 0 0>; +}; + +/include/ "fsl/p1010si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p1010rdb.dts b/arch/powerpc/boot/dts/p1010rdb.dts deleted file mode 100644 index b868d22984e9..000000000000 --- a/arch/powerpc/boot/dts/p1010rdb.dts +++ /dev/null @@ -1,66 +0,0 @@ -/* - * P1010 RDB Device Tree Source - * - * Copyright 2011 Freescale Semiconductor Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -/include/ "fsl/p1010si-pre.dtsi" - -/ { - model = "fsl,P1010RDB"; - compatible = "fsl,P1010RDB"; - - memory { - device_type = "memory"; - }; - - board_ifc: ifc: ifc@ffe1e000 { - /* NOR, NAND Flashes and CPLD on board */ - ranges = <0x0 0x0 0x0 0xee000000 0x02000000 - 0x1 0x0 0x0 0xff800000 0x00010000 - 0x3 0x0 0x0 0xffb00000 0x00000020>; - reg = <0x0 0xffe1e000 0 0x2000>; - }; - - board_soc: soc: soc@ffe00000 { - ranges = <0x0 0x0 0xffe00000 0x100000>; - }; - - pci0: pcie@ffe09000 { - reg = <0 0xffe09000 0 0x1000>; - ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 - 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>; - pcie@0 { - ranges = <0x2000000 0x0 0xa0000000 - 0x2000000 0x0 0xa0000000 - 0x0 0x20000000 - - 0x1000000 0x0 0x0 - 0x1000000 0x0 0x0 - 0x0 0x100000>; - }; - }; - - pci1: pcie@ffe0a000 { - reg = <0 0xffe0a000 0 0x1000>; - ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000 - 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>; - pcie@0 { - ranges = <0x2000000 0x0 0x80000000 - 0x2000000 0x0 0x80000000 - 0x0 0x20000000 - - 0x1000000 0x0 0x0 - 0x1000000 0x0 0x0 - 0x0 0x100000>; - }; - }; -}; - -/include/ "p1010rdb.dtsi" -/include/ "fsl/p1010si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p1010rdb.dtsi b/arch/powerpc/boot/dts/p1010rdb.dtsi index ec7c27a64671..ea534efa790d 100644 --- a/arch/powerpc/boot/dts/p1010rdb.dtsi +++ b/arch/powerpc/boot/dts/p1010rdb.dtsi @@ -69,49 +69,11 @@ }; }; - nand@1,0 { + ifc_nand: nand@1,0 { #address-cells = <1>; #size-cells = <1>; compatible = "fsl,ifc-nand"; reg = <0x1 0x0 0x10000>; - - partition@0 { - /* This location must not be altered */ - /* 1MB for u-boot Bootloader Image */ - reg = <0x0 0x00100000>; - label = "NAND U-Boot Image"; - read-only; - }; - - partition@100000 { - /* 1MB for DTB Image */ - reg = <0x00100000 0x00100000>; - label = "NAND DTB Image"; - }; - - partition@200000 { - /* 4MB for Linux Kernel Image */ - reg = <0x00200000 0x00400000>; - label = "NAND Linux Kernel Image"; - }; - - partition@600000 { - /* 4MB for Compressed Root file System Image */ - reg = <0x00600000 0x00400000>; - label = "NAND Compressed RFS Image"; - }; - - partition@a00000 { - /* 15MB for JFFS2 based Root file System */ - reg = <0x00a00000 0x00f00000>; - label = "NAND JFFS2 Root File System"; - }; - - partition@1900000 { - /* 7MB for User Area */ - reg = <0x01900000 0x00700000>; - label = "NAND User area"; - }; }; cpld@3,0 { @@ -193,17 +155,14 @@ mdio@24000 { phy0: ethernet-phy@0 { - interrupts = <3 1 0 0>; reg = <0x1>; }; phy1: ethernet-phy@1 { - interrupts = <2 1 0 0>; reg = <0x0>; }; phy2: ethernet-phy@2 { - interrupts = <2 1 0 0>; reg = <0x2>; }; diff --git a/arch/powerpc/boot/dts/p1010rdb_32b.dtsi b/arch/powerpc/boot/dts/p1010rdb_32b.dtsi new file mode 100644 index 000000000000..fdc19aab2f70 --- /dev/null +++ b/arch/powerpc/boot/dts/p1010rdb_32b.dtsi @@ -0,0 +1,79 @@ +/* + * P1010 RDB Device Tree Source stub (no addresses or top-level ranges) + * + * Copyright 2013 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +memory { + device_type = "memory"; +}; + +board_ifc: ifc: ifc@ffe1e000 { + /* NOR, NAND Flashes and CPLD on board */ + ranges = <0x0 0x0 0x0 0xee000000 0x02000000 + 0x1 0x0 0x0 0xff800000 0x00010000 + 0x3 0x0 0x0 0xffb00000 0x00000020>; + reg = <0x0 0xffe1e000 0 0x2000>; +}; + +board_soc: soc: soc@ffe00000 { + ranges = <0x0 0x0 0xffe00000 0x100000>; +}; + +pci0: pcie@ffe09000 { + reg = <0 0xffe09000 0 0x1000>; + ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xa0000000 + 0x2000000 0x0 0xa0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; +}; + +pci1: pcie@ffe0a000 { + reg = <0 0xffe0a000 0 0x1000>; + ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0x80000000 + 0x2000000 0x0 0x80000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; +}; diff --git a/arch/powerpc/boot/dts/p1010rdb_36b.dtsi b/arch/powerpc/boot/dts/p1010rdb_36b.dtsi new file mode 100644 index 000000000000..de2fceed4f79 --- /dev/null +++ b/arch/powerpc/boot/dts/p1010rdb_36b.dtsi @@ -0,0 +1,79 @@ +/* + * P1010 RDB Device Tree Source stub (no addresses or top-level ranges) + * + * Copyright 2013 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +memory { + device_type = "memory"; +}; + +board_ifc: ifc: ifc@fffe1e000 { + /* NOR, NAND Flashes and CPLD on board */ + ranges = <0x0 0x0 0xf 0xee000000 0x02000000 + 0x1 0x0 0xf 0xff800000 0x00010000 + 0x3 0x0 0xf 0xffb00000 0x00000020>; + reg = <0xf 0xffe1e000 0 0x2000>; +}; + +board_soc: soc: soc@fffe00000 { + ranges = <0x0 0xf 0xffe00000 0x100000>; +}; + +pci0: pcie@fffe09000 { + reg = <0xf 0xffe09000 0 0x1000>; + ranges = <0x2000000 0x0 0xc0000000 0xc 0x20000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xc0000000 + 0x2000000 0x0 0xc0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; +}; + +pci1: pcie@fffe0a000 { + reg = <0xf 0xffe0a000 0 0x1000>; + ranges = <0x2000000 0x0 0xc0000000 0xc 0x20000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xc0000000 + 0x2000000 0x0 0xc0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; +}; diff --git a/arch/powerpc/boot/dts/p1022ds.dtsi b/arch/powerpc/boot/dts/p1022ds.dtsi index 873da350d01b..957e0dc1dc0f 100644 --- a/arch/powerpc/boot/dts/p1022ds.dtsi +++ b/arch/powerpc/boot/dts/p1022ds.dtsi @@ -146,8 +146,9 @@ */ }; rtc@68 { - compatible = "dallas,ds1339"; + compatible = "dallas,ds3232"; reg = <0x68>; + interrupts = <0x1 0x1 0 0>; }; adt7461@4c { compatible = "adi,adt7461"; diff --git a/arch/powerpc/boot/dts/p1025twr.dts b/arch/powerpc/boot/dts/p1025twr.dts new file mode 100644 index 000000000000..9036a4987905 --- /dev/null +++ b/arch/powerpc/boot/dts/p1025twr.dts @@ -0,0 +1,95 @@ +/* + * P1025 TWR Device Tree Source (32-bit address map) + * + * Copyright 2013 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "fsl/p1021si-pre.dtsi" +/ { + model = "fsl,P1025"; + compatible = "fsl,TWR-P1025"; + + memory { + device_type = "memory"; + }; + + lbc: localbus@ffe05000 { + reg = <0 0xffe05000 0 0x1000>; + + /* NOR Flash and SSD1289 */ + ranges = <0x0 0x0 0x0 0xec000000 0x04000000 + 0x2 0x0 0x0 0xe0000000 0x00020000>; + }; + + soc: soc@ffe00000 { + ranges = <0x0 0x0 0xffe00000 0x100000>; + }; + + pci0: pcie@ffe09000 { + ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>; + reg = <0 0xffe09000 0 0x1000>; + pcie@0 { + ranges = <0x2000000 0x0 0xa0000000 + 0x2000000 0x0 0xa0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci1: pcie@ffe0a000 { + reg = <0 0xffe0a000 0 0x1000>; + ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0x80000000 + 0x2000000 0x0 0x80000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + qe: qe@ffe80000 { + ranges = <0x0 0x0 0xffe80000 0x40000>; + reg = <0 0xffe80000 0 0x480>; + brg-frequency = <0>; + bus-frequency = <0>; + }; +}; + +/include/ "p1025twr.dtsi" +/include/ "fsl/p1021si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p1025twr.dtsi b/arch/powerpc/boot/dts/p1025twr.dtsi new file mode 100644 index 000000000000..8453501c256e --- /dev/null +++ b/arch/powerpc/boot/dts/p1025twr.dtsi @@ -0,0 +1,280 @@ +/* + * P1025 TWR Device Tree Source stub (no addresses or top-level ranges) + * + * Copyright 2013 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/{ + aliases { + ethernet3 = &enet3; + ethernet4 = &enet4; + }; +}; + +&lbc { + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x4000000>; + bank-width = <2>; + device-width = <1>; + + partition@0 { + /* This location must not be altered */ + /* 256KB for Vitesse 7385 Switch firmware */ + reg = <0x0 0x00040000>; + label = "NOR Vitesse-7385 Firmware"; + read-only; + }; + + partition@40000 { + /* 256KB for DTB Image */ + reg = <0x00040000 0x00040000>; + label = "NOR DTB Image"; + }; + + partition@80000 { + /* 5.5 MB for Linux Kernel Image */ + reg = <0x00080000 0x00580000>; + label = "NOR Linux Kernel Image"; + }; + + partition@400000 { + /* 56.75MB for Root file System */ + reg = <0x00600000 0x038c0000>; + label = "NOR Root File System"; + }; + + partition@ec0000 { + /* This location must not be altered */ + /* 256KB for QE ucode firmware*/ + reg = <0x03ec0000 0x00040000>; + label = "NOR QE microcode firmware"; + read-only; + }; + + partition@f00000 { + /* This location must not be altered */ + /* 512KB for u-boot Bootloader Image */ + /* 512KB for u-boot Environment Variables */ + reg = <0x03f00000 0x00100000>; + label = "NOR U-Boot Image"; + read-only; + }; + }; + + /* CS2 for Display */ + display@2,0 { + compatible = "solomon,ssd1289fb"; + reg = <0x2 0x0000 0x0004>; + }; + +}; + +&soc { + usb@22000 { + phy_type = "ulpi"; + }; + + mdio@24000 { + phy0: ethernet-phy@2 { + interrupt-parent = <&mpic>; + interrupts = <1 1 0 0>; + reg = <0x2>; + }; + + phy1: ethernet-phy@1 { + interrupt-parent = <&mpic>; + interrupts = <2 1 0 0>; + reg = <0x1>; + }; + + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@25000 { + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@26000 { + tbi2: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet0: ethernet@b0000 { + phy-handle = <&phy0>; + phy-connection-type = "rgmii-id"; + + }; + + enet1: ethernet@b1000 { + status = "disabled"; + }; + + enet2: ethernet@b2000 { + phy-handle = <&phy1>; + phy-connection-type = "rgmii-id"; + }; + + par_io@e0100 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0xe0100 0x60>; + ranges = <0x0 0xe0100 0x60>; + device_type = "par_io"; + num-ports = <3>; + pio1: ucc_pin@01 { + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 0x1 0x13 0x1 0x0 0x1 0x0 /* QE_MUX_MDC */ + 0x1 0x14 0x3 0x0 0x1 0x0 /* QE_MUX_MDIO */ + 0x0 0x17 0x2 0x0 0x2 0x0 /* CLK12 */ + 0x0 0x18 0x2 0x0 0x1 0x0 /* CLK9 */ + 0x0 0x7 0x1 0x0 0x2 0x0 /* ENET1_TXD0_SER1_TXD0 */ + 0x0 0x9 0x1 0x0 0x2 0x0 /* ENET1_TXD1_SER1_TXD1 */ + 0x0 0xb 0x1 0x0 0x2 0x0 /* ENET1_TXD2_SER1_TXD2 */ + 0x0 0xc 0x1 0x0 0x2 0x0 /* ENET1_TXD3_SER1_TXD3 */ + 0x0 0x6 0x2 0x0 0x2 0x0 /* ENET1_RXD0_SER1_RXD0 */ + 0x0 0xa 0x2 0x0 0x2 0x0 /* ENET1_RXD1_SER1_RXD1 */ + 0x0 0xe 0x2 0x0 0x2 0x0 /* ENET1_RXD2_SER1_RXD2 */ + 0x0 0xf 0x2 0x0 0x2 0x0 /* ENET1_RXD3_SER1_RXD3 */ + 0x0 0x5 0x1 0x0 0x2 0x0 /* ENET1_TX_EN_SER1_RTS_B */ + 0x0 0xd 0x1 0x0 0x2 0x0 /* ENET1_TX_ER */ + 0x0 0x4 0x2 0x0 0x2 0x0 /* ENET1_RX_DV_SER1_CTS_B */ + 0x0 0x8 0x2 0x0 0x2 0x0 /* ENET1_RX_ER_SER1_CD_B */ + 0x0 0x11 0x2 0x0 0x2 0x0 /* ENET1_CRS */ + 0x0 0x10 0x2 0x0 0x2 0x0>; /* ENET1_COL */ + }; + + pio2: ucc_pin@02 { + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 0x1 0x13 0x1 0x0 0x1 0x0 /* QE_MUX_MDC */ + 0x1 0x14 0x3 0x0 0x1 0x0 /* QE_MUX_MDIO */ + 0x1 0xb 0x2 0x0 0x1 0x0 /* CLK13 */ + 0x1 0x7 0x1 0x0 0x2 0x0 /* ENET5_TXD0_SER5_TXD0 */ + 0x1 0xa 0x1 0x0 0x2 0x0 /* ENET5_TXD1_SER5_TXD1 */ + 0x1 0x6 0x2 0x0 0x2 0x0 /* ENET5_RXD0_SER5_RXD0 */ + 0x1 0x9 0x2 0x0 0x2 0x0 /* ENET5_RXD1_SER5_RXD1 */ + 0x1 0x5 0x1 0x0 0x2 0x0 /* ENET5_TX_EN_SER5_RTS_B */ + 0x1 0x4 0x2 0x0 0x2 0x0 /* ENET5_RX_DV_SER5_CTS_B */ + 0x1 0x8 0x2 0x0 0x2 0x0>; /* ENET5_RX_ER_SER5_CD_B */ + }; + + pio3: ucc_pin@03 { + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 0x0 0x16 0x2 0x0 0x2 0x0 /* SER7_CD_B*/ + 0x0 0x12 0x2 0x0 0x2 0x0 /* SER7_CTS_B*/ + 0x0 0x13 0x1 0x0 0x2 0x0 /* SER7_RTS_B*/ + 0x0 0x14 0x2 0x0 0x2 0x0 /* SER7_RXD0*/ + 0x0 0x15 0x1 0x0 0x2 0x0>; /* SER7_TXD0*/ + }; + + pio4: ucc_pin@04 { + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 0x1 0x0 0x2 0x0 0x2 0x0 /* SER3_CD_B*/ + 0x0 0x1c 0x2 0x0 0x2 0x0 /* SER3_CTS_B*/ + 0x0 0x1d 0x1 0x0 0x2 0x0 /* SER3_RTS_B*/ + 0x0 0x1e 0x2 0x0 0x2 0x0 /* SER3_RXD0*/ + 0x0 0x1f 0x1 0x0 0x2 0x0>; /* SER3_TXD0*/ + }; + }; +}; + +&qe { + enet3: ucc@2000 { + device_type = "network"; + compatible = "ucc_geth"; + rx-clock-name = "clk12"; + tx-clock-name = "clk9"; + pio-handle = <&pio1>; + phy-handle = <&qe_phy0>; + phy-connection-type = "mii"; + }; + + mdio@2120 { + qe_phy0: ethernet-phy@18 { + interrupt-parent = <&mpic>; + interrupts = <4 1 0 0>; + reg = <0x18>; + device_type = "ethernet-phy"; + }; + qe_phy1: ethernet-phy@19 { + interrupt-parent = <&mpic>; + interrupts = <5 1 0 0>; + reg = <0x19>; + device_type = "ethernet-phy"; + }; + tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet4: ucc@2400 { + device_type = "network"; + compatible = "ucc_geth"; + rx-clock-name = "none"; + tx-clock-name = "clk13"; + pio-handle = <&pio2>; + phy-handle = <&qe_phy1>; + phy-connection-type = "rmii"; + }; + + serial2: ucc@2600 { + device_type = "serial"; + compatible = "ucc_uart"; + port-number = <0>; + rx-clock-name = "brg6"; + tx-clock-name = "brg6"; + pio-handle = <&pio3>; + }; + + serial3: ucc@2200 { + device_type = "serial"; + compatible = "ucc_uart"; + port-number = <1>; + rx-clock-name = "brg2"; + tx-clock-name = "brg2"; + pio-handle = <&pio4>; + }; +}; diff --git a/arch/powerpc/boot/dts/virtex440-ml507.dts b/arch/powerpc/boot/dts/virtex440-ml507.dts index fc7073bc547e..391a4e299783 100644 --- a/arch/powerpc/boot/dts/virtex440-ml507.dts +++ b/arch/powerpc/boot/dts/virtex440-ml507.dts @@ -257,6 +257,8 @@ #size-cells = <1>; compatible = "xlnx,compound"; ethernet@81c00000 { + #address-cells = <1>; + #size-cells = <0>; compatible = "xlnx,xps-ll-temac-1.01.b"; device_type = "network"; interrupt-parent = <&xps_intc_0>; diff --git a/arch/powerpc/boot/mvme5100.c b/arch/powerpc/boot/mvme5100.c new file mode 100644 index 000000000000..cb865f83c60b --- /dev/null +++ b/arch/powerpc/boot/mvme5100.c @@ -0,0 +1,27 @@ +/* + * Motorola/Emerson MVME5100 with PPCBug firmware. + * + * Author: Stephen Chivers <schivers@csc.com> + * + * Copyright 2013 CSC Australia Pty. Ltd. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + */ +#include "types.h" +#include "ops.h" +#include "io.h" + +BSS_STACK(4096); + +void platform_init(unsigned long r3, unsigned long r4, unsigned long r5) +{ + u32 heapsize; + + heapsize = 0x8000000 - (u32)_end; /* 128M */ + simple_alloc_init(_end, heapsize, 32, 64); + fdt_init(_dtb_start); + serial_console_init(); +} diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper index 2e1af74a64be..d27a25518b01 100755 --- a/arch/powerpc/boot/wrapper +++ b/arch/powerpc/boot/wrapper @@ -265,6 +265,10 @@ epapr) link_address='0x20000000' pie=-pie ;; +mvme5100) + platformo="$object/fixed-head.o $object/mvme5100.o" + binary=y + ;; esac vmz="$tmpdir/`basename \"$kernel\"`.$ext" |
