1 files changed, 338 insertions, 0 deletions

diff --git a/arch/openrisc/mm/fault.c b/arch/openrisc/mm/fault.c
new file mode 100644
index 000000000000..a5dce82f864b
--- /dev/null
+++ b/arch/openrisc/mm/fault.c
@@ -0,0 +1,338 @@
+/*
+ * OpenRISC fault.c
+ *
+ * Linux architectural port borrowing liberally from similar works of
+ * others.  All original copyrights apply as per the original source
+ * declaration.
+ *
+ * Modifications for the OpenRISC architecture:
+ * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
+ * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
+ *
+ *      This program is free software; you can redistribute it and/or
+ *      modify it under the terms of the GNU General Public License
+ *      as published by the Free Software Foundation; either version
+ *      2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+
+#include <asm/uaccess.h>
+#include <asm/siginfo.h>
+#include <asm/signal.h>
+
+#define NUM_TLB_ENTRIES 64
+#define TLB_OFFSET(add) (((add) >> PAGE_SHIFT) & (NUM_TLB_ENTRIES-1))
+
+unsigned long pte_misses;	/* updated by do_page_fault() */
+unsigned long pte_errors;	/* updated by do_page_fault() */
+
+/* __PHX__ :: - check the vmalloc_fault in do_page_fault()
+ *            - also look into include/asm-or32/mmu_context.h
+ */
+volatile pgd_t *current_pgd;
+
+extern void die(char *, struct pt_regs *, long);
+
+/*
+ * This routine handles page faults.  It determines the address,
+ * and the problem, and then passes it off to one of the appropriate
+ * routines.
+ *
+ * If this routine detects a bad access, it returns 1, otherwise it
+ * returns 0.
+ */
+
+asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long address,
+			      unsigned long vector, int write_acc)
+{
+	struct task_struct *tsk;
+	struct mm_struct *mm;
+	struct vm_area_struct *vma;
+	siginfo_t info;
+	int fault;
+
+	tsk = current;
+
+	/*
+	 * We fault-in kernel-space virtual memory on-demand. The
+	 * 'reference' page table is init_mm.pgd.
+	 *
+	 * NOTE! We MUST NOT take any locks for this case. We may
+	 * be in an interrupt or a critical region, and should
+	 * only copy the information from the master page table,
+	 * nothing more.
+	 *
+	 * NOTE2: This is done so that, when updating the vmalloc
+	 * mappings we don't have to walk all processes pgdirs and
+	 * add the high mappings all at once. Instead we do it as they
+	 * are used. However vmalloc'ed page entries have the PAGE_GLOBAL
+	 * bit set so sometimes the TLB can use a lingering entry.
+	 *
+	 * This verifies that the fault happens in kernel space
+	 * and that the fault was not a protection error.
+	 */
+
+	if (address >= VMALLOC_START &&
+	    (vector != 0x300 && vector != 0x400) &&
+	    !user_mode(regs))
+		goto vmalloc_fault;
+
+	/* If exceptions were enabled, we can reenable them here */
+	if (user_mode(regs)) {
+		/* Exception was in userspace: reenable interrupts */
+		local_irq_enable();
+	} else {
+		/* If exception was in a syscall, then IRQ's may have
+		 * been enabled or disabled.  If they were enabled,
+		 * reenable them.
+		 */
+		if (regs->sr && (SPR_SR_IEE | SPR_SR_TEE))
+			local_irq_enable();
+	}
+
+	mm = tsk->mm;
+	info.si_code = SEGV_MAPERR;
+
+	/*
+	 * If we're in an interrupt or have no user
+	 * context, we must not take the fault..
+	 */
+
+	if (in_interrupt() || !mm)
+		goto no_context;
+
+	down_read(&mm->mmap_sem);
+	vma = find_vma(mm, address);
+
+	if (!vma)
+		goto bad_area;
+
+	if (vma->vm_start <= address)
+		goto good_area;
+
+	if (!(vma->vm_flags & VM_GROWSDOWN))
+		goto bad_area;
+
+	if (user_mode(regs)) {
+		/*
+		 * accessing the stack below usp is always a bug.
+		 * we get page-aligned addresses so we can only check
+		 * if we're within a page from usp, but that might be
+		 * enough to catch brutal errors at least.
+		 */
+		if (address + PAGE_SIZE < regs->sp)
+			goto bad_area;
+	}
+	if (expand_stack(vma, address))
+		goto bad_area;
+
+	/*
+	 * Ok, we have a good vm_area for this memory access, so
+	 * we can handle it..
+	 */
+
+good_area:
+	info.si_code = SEGV_ACCERR;
+
+	/* first do some preliminary protection checks */
+
+	if (write_acc) {
+		if (!(vma->vm_flags & VM_WRITE))
+			goto bad_area;
+	} else {
+		/* not present */
+		if (!(vma->vm_flags & (VM_READ | VM_EXEC)))
+			goto bad_area;
+	}
+
+	/* are we trying to execute nonexecutable area */
+	if ((vector == 0x400) && !(vma->vm_page_prot.pgprot & _PAGE_EXEC))
+		goto bad_area;
+
+	/*
+	 * If for any reason at all we couldn't handle the fault,
+	 * make sure we exit gracefully rather than endlessly redo
+	 * the fault.
+	 */
+
+	fault = handle_mm_fault(mm, vma, address, write_acc);
+	if (unlikely(fault & VM_FAULT_ERROR)) {
+		if (fault & VM_FAULT_OOM)
+			goto out_of_memory;
+		else if (fault & VM_FAULT_SIGBUS)
+			goto do_sigbus;
+		BUG();
+	}
+	/*RGD modeled on Cris */
+	if (fault & VM_FAULT_MAJOR)
+		tsk->maj_flt++;
+	else
+		tsk->min_flt++;
+
+	up_read(&mm->mmap_sem);
+	return;
+
+	/*
+	 * Something tried to access memory that isn't in our memory map..
+	 * Fix it, but check if it's kernel or user first..
+	 */
+
+bad_area:
+	up_read(&mm->mmap_sem);
+
+bad_area_nosemaphore:
+
+	/* User mode accesses just cause a SIGSEGV */
+
+	if (user_mode(regs)) {
+		info.si_signo = SIGSEGV;
+		info.si_errno = 0;
+		/* info.si_code has been set above */
+		info.si_addr = (void *)address;
+		force_sig_info(SIGSEGV, &info, tsk);
+		return;
+	}
+
+no_context:
+
+	/* Are we prepared to handle this kernel fault?
+	 *
+	 * (The kernel has valid exception-points in the source
+	 *  when it acesses user-memory. When it fails in one
+	 *  of those points, we find it in a table and do a jump
+	 *  to some fixup code that loads an appropriate error
+	 *  code)
+	 */
+
+	{
+		const struct exception_table_entry *entry;
+
+		__asm__ __volatile__("l.nop 42");
+
+		if ((entry = search_exception_tables(regs->pc)) != NULL) {
+			/* Adjust the instruction pointer in the stackframe */
+			regs->pc = entry->fixup;
+			return;
+		}
+	}
+
+	/*
+	 * Oops. The kernel tried to access some bad page. We'll have to
+	 * terminate things with extreme prejudice.
+	 */
+
+	if ((unsigned long)(address) < PAGE_SIZE)
+		printk(KERN_ALERT
+		       "Unable to handle kernel NULL pointer dereference");
+	else
+		printk(KERN_ALERT "Unable to handle kernel access");
+	printk(" at virtual address 0x%08lx\n", address);
+
+	die("Oops", regs, write_acc);
+
+	do_exit(SIGKILL);
+
+	/*
+	 * We ran out of memory, or some other thing happened to us that made
+	 * us unable to handle the page fault gracefully.
+	 */
+
+out_of_memory:
+	__asm__ __volatile__("l.nop 42");
+	__asm__ __volatile__("l.nop 1");
+
+	up_read(&mm->mmap_sem);
+	printk("VM: killing process %s\n", tsk->comm);
+	if (user_mode(regs))
+		do_exit(SIGKILL);
+	goto no_context;
+
+do_sigbus:
+	up_read(&mm->mmap_sem);
+
+	/*
+	 * Send a sigbus, regardless of whether we were in kernel
+	 * or user mode.
+	 */
+	info.si_signo = SIGBUS;
+	info.si_errno = 0;
+	info.si_code = BUS_ADRERR;
+	info.si_addr = (void *)address;
+	force_sig_info(SIGBUS, &info, tsk);
+
+	/* Kernel mode? Handle exceptions or die */
+	if (!user_mode(regs))
+		goto no_context;
+	return;
+
+vmalloc_fault:
+	{
+		/*
+		 * Synchronize this task's top level page-table
+		 * with the 'reference' page table.
+		 *
+		 * Use current_pgd instead of tsk->active_mm->pgd
+		 * since the latter might be unavailable if this
+		 * code is executed in a misfortunately run irq
+		 * (like inside schedule() between switch_mm and
+		 *  switch_to...).
+		 */
+
+		int offset = pgd_index(address);
+		pgd_t *pgd, *pgd_k;
+		pud_t *pud, *pud_k;
+		pmd_t *pmd, *pmd_k;
+		pte_t *pte_k;
+
+/*
+		phx_warn("do_page_fault(): vmalloc_fault will not work, "
+			 "since current_pgd assign a proper value somewhere\n"
+			 "anyhow we don't need this at the moment\n");
+
+		phx_mmu("vmalloc_fault");
+*/
+		pgd = (pgd_t *)current_pgd + offset;
+		pgd_k = init_mm.pgd + offset;
+
+		/* Since we're two-level, we don't need to do both
+		 * set_pgd and set_pmd (they do the same thing). If
+		 * we go three-level at some point, do the right thing
+		 * with pgd_present and set_pgd here.
+		 *
+		 * Also, since the vmalloc area is global, we don't
+		 * need to copy individual PTE's, it is enough to
+		 * copy the pgd pointer into the pte page of the
+		 * root task. If that is there, we'll find our pte if
+		 * it exists.
+		 */
+
+		pud = pud_offset(pgd, address);
+		pud_k = pud_offset(pgd_k, address);
+		if (!pud_present(*pud_k))
+			goto no_context;
+
+		pmd = pmd_offset(pud, address);
+		pmd_k = pmd_offset(pud_k, address);
+
+		if (!pmd_present(*pmd_k))
+			goto bad_area_nosemaphore;
+
+		set_pmd(pmd, *pmd_k);
+
+		/* Make sure the actual PTE exists as well to
+		 * catch kernel vmalloc-area accesses to non-mapped
+		 * addresses. If we don't do this, this will just
+		 * silently loop forever.
+		 */
+
+		pte_k = pte_offset_kernel(pmd_k, address);
+		if (!pte_present(*pte_k))
+			goto no_context;
+
+		return;
+	}
+}