diff options
Diffstat (limited to 'arch/mn10300/unit-asb2364/include/unit/serial.h')
| -rw-r--r-- | arch/mn10300/unit-asb2364/include/unit/serial.h | 151 |
1 files changed, 0 insertions, 151 deletions
diff --git a/arch/mn10300/unit-asb2364/include/unit/serial.h b/arch/mn10300/unit-asb2364/include/unit/serial.h deleted file mode 100644 index 92f224a97efc..000000000000 --- a/arch/mn10300/unit-asb2364/include/unit/serial.h +++ /dev/null @@ -1,151 +0,0 @@ -/* Unit-specific 8250 serial ports - * - * Copyright (C) 2005 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _ASM_UNIT_SERIAL_H -#define _ASM_UNIT_SERIAL_H - -#include <asm/cpu-regs.h> -#include <proc/irq.h> -#include <unit/fpga-regs.h> -#include <linux/serial_reg.h> - -#define SERIAL_PORT0_BASE_ADDRESS 0xA8200000 - -#define SERIAL_IRQ XIRQ1 /* single serial (TL16C550C) (Lo) */ - -/* - * The ASB2364 has an 12.288 MHz clock - * for your UART. - * - * It'd be nice if someone built a serial card with a 24.576 MHz - * clock, since the 16550A is capable of handling a top speed of 1.5 - * megabits/second; but this requires the faster clock. - */ -#define BASE_BAUD (12288000 / 16) - -/* - * dispose of the /dev/ttyS0 and /dev/ttyS1 serial ports - */ -#ifndef CONFIG_GDBSTUB_ON_TTYSx - -#define SERIAL_PORT_DFNS \ - { \ - .baud_base = BASE_BAUD, \ - .irq = SERIAL_IRQ, \ - .flags = STD_COM_FLAGS, \ - .iomem_base = (u8 *) SERIAL_PORT0_BASE_ADDRESS, \ - .iomem_reg_shift = 1, \ - .io_type = SERIAL_IO_MEM, \ - }, - -#ifndef __ASSEMBLY__ - -static inline void __debug_to_serial(const char *p, int n) -{ -} - -#endif /* !__ASSEMBLY__ */ - -#else /* CONFIG_GDBSTUB_ON_TTYSx */ - -#define SERIAL_PORT_DFNS /* stolen by gdb-stub */ - -#if defined(CONFIG_GDBSTUB_ON_TTYS0) -#define GDBPORT_SERIAL_RX __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_RX * 2, u8) -#define GDBPORT_SERIAL_TX __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_TX * 2, u8) -#define GDBPORT_SERIAL_DLL __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_DLL * 2, u8) -#define GDBPORT_SERIAL_DLM __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_DLM * 2, u8) -#define GDBPORT_SERIAL_IER __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_IER * 2, u8) -#define GDBPORT_SERIAL_IIR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_IIR * 2, u8) -#define GDBPORT_SERIAL_FCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_FCR * 2, u8) -#define GDBPORT_SERIAL_LCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LCR * 2, u8) -#define GDBPORT_SERIAL_MCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MCR * 2, u8) -#define GDBPORT_SERIAL_LSR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LSR * 2, u8) -#define GDBPORT_SERIAL_MSR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MSR * 2, u8) -#define GDBPORT_SERIAL_SCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_SCR * 2, u8) -#define GDBPORT_SERIAL_IRQ SERIAL_IRQ - -#elif defined(CONFIG_GDBSTUB_ON_TTYS1) -#error The ASB2364 does not have a /dev/ttyS1 -#endif - -#ifndef __ASSEMBLY__ - -static inline void __debug_to_serial(const char *p, int n) -{ - char ch; - -#define LSR_WAIT_FOR(STATE) \ - do {} while (!(GDBPORT_SERIAL_LSR & UART_LSR_##STATE)) -#define FLOWCTL_QUERY(LINE) \ - ({ GDBPORT_SERIAL_MSR & UART_MSR_##LINE; }) -#define FLOWCTL_WAIT_FOR(LINE) \ - do {} while (!(GDBPORT_SERIAL_MSR & UART_MSR_##LINE)) -#define FLOWCTL_CLEAR(LINE) \ - do { GDBPORT_SERIAL_MCR &= ~UART_MCR_##LINE; } while (0) -#define FLOWCTL_SET(LINE) \ - do { GDBPORT_SERIAL_MCR |= UART_MCR_##LINE; } while (0) - - FLOWCTL_SET(DTR); - - for (; n > 0; n--) { - LSR_WAIT_FOR(THRE); - FLOWCTL_WAIT_FOR(CTS); - - ch = *p++; - if (ch == 0x0a) { - GDBPORT_SERIAL_TX = 0x0d; - LSR_WAIT_FOR(THRE); - FLOWCTL_WAIT_FOR(CTS); - } - GDBPORT_SERIAL_TX = ch; - } - - FLOWCTL_CLEAR(DTR); -} - -#endif /* !__ASSEMBLY__ */ - -#endif /* CONFIG_GDBSTUB_ON_TTYSx */ - -#define SERIAL_INITIALIZE \ -do { \ - /* release reset */ \ - ASB2364_FPGA_REG_RESET_UART = 0x0001; \ - SyncExBus(); \ -} while (0) - -#define SERIAL_CHECK_INTERRUPT \ -do { \ - if ((ASB2364_FPGA_REG_IRQ_UART & 0x0001) == 0x0001) { \ - return IRQ_NONE; \ - } \ -} while (0) - -#define SERIAL_CLEAR_INTERRUPT \ -do { \ - ASB2364_FPGA_REG_IRQ_UART = 0x0001; \ - SyncExBus(); \ -} while (0) - -#define SERIAL_SET_INT_MASK \ -do { \ - ASB2364_FPGA_REG_MASK_UART = 0x0001; \ - SyncExBus(); \ -} while (0) - -#define SERIAL_CLEAR_INT_MASK \ -do { \ - ASB2364_FPGA_REG_MASK_UART = 0x0000; \ - SyncExBus(); \ -} while (0) - -#endif /* _ASM_UNIT_SERIAL_H */ |
