diff options
Diffstat (limited to 'arch/mn10300/Kconfig')
| -rw-r--r-- | arch/mn10300/Kconfig | 381 |
1 files changed, 381 insertions, 0 deletions
diff --git a/arch/mn10300/Kconfig b/arch/mn10300/Kconfig new file mode 100644 index 000000000000..eedc3a5e0d9b --- /dev/null +++ b/arch/mn10300/Kconfig @@ -0,0 +1,381 @@ +# +# For a description of the syntax of this configuration file, +# see Documentation/kbuild/kconfig-language.txt. +# + +mainmenu "Linux Kernel Configuration" + +config MN10300 + def_bool y + +config AM33 + def_bool y + +config MMU + def_bool y + +config HIGHMEM + def_bool n + +config NUMA + def_bool n + +config UID16 + def_bool y + +config RWSEM_GENERIC_SPINLOCK + def_bool y + +config RWSEM_XCHGADD_ALGORITHM + bool + +config GENERIC_HARDIRQS_NO__DO_IRQ + def_bool y + +config GENERIC_CALIBRATE_DELAY + def_bool y + +config GENERIC_FIND_NEXT_BIT + def_bool y + +config GENERIC_HWEIGHT + def_bool y + +config GENERIC_TIME + def_bool y + +config GENERIC_BUG + def_bool y + +config QUICKLIST + def_bool y + +config ARCH_HAS_ILOG2_U32 + def_bool y + +config ARCH_SUPPORTS_AOUT + def_bool n + +# Use the generic interrupt handling code in kernel/irq/ +config GENERIC_HARDIRQS + def_bool y + +config HOTPLUG_CPU + def_bool n + +mainmenu "Matsushita MN10300/AM33 Kernel Configuration" + +source "init/Kconfig" + + +menu "Matsushita MN10300 system setup" + +choice + prompt "Unit type" + default MN10300_UNIT_ASB2303 + help + This option specifies board for which the kernel will be + compiled. It affects the external peripherals catered for. + +config MN10300_UNIT_ASB2303 + bool "ASB2303" + +config MN10300_UNIT_ASB2305 + bool "ASB2305" + +endchoice + +choice + prompt "Processor support" + default MN10300_PROC_MN103E010 + help + This option specifies the processor for which the kernel will be + compiled. It affects the on-chip peripherals catered for. + +config MN10300_PROC_MN103E010 + bool "MN103E010" + depends on MN10300_UNIT_ASB2303 || MN10300_UNIT_ASB2305 + select MN10300_PROC_HAS_TTYSM0 + select MN10300_PROC_HAS_TTYSM1 + select MN10300_PROC_HAS_TTYSM2 + +endchoice + +choice + prompt "Processor core support" + default MN10300_CPU_AM33V2 + help + This option specifies the processor core for which the kernel will be + compiled. It affects the instruction set used. + +config MN10300_CPU_AM33V2 + bool "AM33v2" + +endchoice + +config FPU + bool "FPU present" + default y + depends on MN10300_PROC_MN103E010 + +choice + prompt "CPU Caching mode" + default MN10300_CACHE_WBACK + help + This option determines the caching mode for the kernel. + + Write-Back caching mode involves the all reads and writes causing + the affected cacheline to be read into the cache first before being + operated upon. Memory is not then updated by a write until the cache + is filled and a cacheline needs to be displaced from the cache to + make room. Only at that point is it written back. + + Write-Through caching only fetches cachelines from memory on a + read. Writes always get written directly to memory. If the affected + cacheline is also in cache, it will be updated too. + + The final option is to turn of caching entirely. + +config MN10300_CACHE_WBACK + bool "Write-Back" + +config MN10300_CACHE_WTHRU + bool "Write-Through" + +config MN10300_CACHE_DISABLED + bool "Disabled" + +endchoice + +menu "Memory layout options" + +config KERNEL_RAM_BASE_ADDRESS + hex "Base address of kernel RAM" + default "0x90000000" + +config INTERRUPT_VECTOR_BASE + hex "Base address of vector table" + default "0x90000000" + help + The base address of the vector table will be programmed into + the TBR register. It must be on 16MiB address boundary. + +config KERNEL_TEXT_ADDRESS + hex "Base address of kernel" + default "0x90001000" + +config KERNEL_ZIMAGE_BASE_ADDRESS + hex "Base address of compressed vmlinux image" + default "0x90700000" + +endmenu + +config PREEMPT + bool "Preemptible Kernel" + help + This option reduces the latency of the kernel when reacting to + real-time or interactive events by allowing a low priority process to + be preempted even if it is in kernel mode executing a system call. + This allows applications to run more reliably even when the system is + under load. + + Say Y here if you are building a kernel for a desktop, embedded + or real-time system. Say N if you are unsure. + +config PREEMPT_BKL + bool "Preempt The Big Kernel Lock" + depends on PREEMPT + default y + help + This option reduces the latency of the kernel by making the + big kernel lock preemptible. + + Say Y here if you are building a kernel for a desktop system. + Say N if you are unsure. + +config MN10300_CURRENT_IN_E2 + bool "Hold current task address in E2 register" + default y + help + This option removes the E2/R2 register from the set available to gcc + for normal use and instead uses it to store the address of the + current process's task_struct whilst in the kernel. + + This means the kernel doesn't need to calculate the address each time + "current" is used (take SP, AND with mask and dereference pointer + just to get the address), and instead can just use E2+offset + addressing each time. + + This has no effect on userspace. + +config MN10300_USING_JTAG + bool "Using JTAG to debug kernel" + default y + help + This options indicates that JTAG will be used to debug the kernel. It + suppresses the use of certain hardware debugging features, such as + single-stepping, which are taken over completely by the JTAG unit. + +config MN10300_RTC + bool "Using MN10300 RTC" + depends on MN10300_PROC_MN103E010 + default n + help + + This option enables support for the RTC, thus enabling time to be + tracked, even when system is powered down. This is available on-chip + on the MN103E010. + +config MN10300_WD_TIMER + bool "Using MN10300 watchdog timer" + default y + help + This options indicates that the watchdog timer will be used. + +config PCI + bool "Use PCI" + depends on MN10300_UNIT_ASB2305 + default y + help + Some systems (such as the ASB2305) have PCI onboard. If you have one + of these boards and you wish to use the PCI facilities, say Y here. + + The PCI-HOWTO, available from + <http://www.tldp.org/docs.html#howto>, contains valuable + information about which PCI hardware does work under Linux and which + doesn't. + +source "drivers/pci/Kconfig" + +source "drivers/pcmcia/Kconfig" + +menu "MN10300 internal serial options" + +config MN10300_PROC_HAS_TTYSM0 + bool + default n + +config MN10300_PROC_HAS_TTYSM1 + bool + default n + +config MN10300_PROC_HAS_TTYSM2 + bool + default n + +config MN10300_TTYSM + bool "Support for ttySM serial ports" + depends on MN10300 + default y + select SERIAL_CORE + help + This option enables support for the on-chip serial ports that the + MN10300 has available. + +config MN10300_TTYSM_CONSOLE + bool "Support for console on ttySM serial ports" + depends on MN10300_TTYSM + select SERIAL_CORE_CONSOLE + help + This option enables support for a console on the on-chip serial ports + that the MN10300 has available. + +# +# /dev/ttySM0 +# +config MN10300_TTYSM0 + bool "Enable SIF0 (/dev/ttySM0)" + depends on MN10300_TTYSM && MN10300_PROC_HAS_TTYSM0 + help + Enable access to SIF0 through /dev/ttySM0 or gdb-stub + +choice + prompt "Select the timer to supply the clock for SIF0" + default MN10300_TTYSM0_TIMER8 + depends on MN10300_TTYSM0 + +config MN10300_TTYSM0_TIMER8 + bool "Use timer 8 (16-bit)" + +config MN10300_TTYSM0_TIMER2 + bool "Use timer 2 (8-bit)" + +endchoice + +# +# /dev/ttySM1 +# +config MN10300_TTYSM1 + bool "Enable SIF1 (/dev/ttySM1)" + depends on MN10300_TTYSM && MN10300_PROC_HAS_TTYSM1 + help + Enable access to SIF1 through /dev/ttySM1 or gdb-stub + +choice + prompt "Select the timer to supply the clock for SIF1" + default MN10300_TTYSM0_TIMER9 + depends on MN10300_TTYSM1 + +config MN10300_TTYSM1_TIMER9 + bool "Use timer 9 (16-bit)" + +config MN10300_TTYSM1_TIMER3 + bool "Use timer 3 (8-bit)" + +endchoice + +# +# /dev/ttySM2 +# +config MN10300_TTYSM2 + bool "Enable SIF2 (/dev/ttySM2)" + depends on MN10300_TTYSM && MN10300_PROC_HAS_TTYSM2 + help + Enable access to SIF2 through /dev/ttySM2 or gdb-stub + +choice + prompt "Select the timer to supply the clock for SIF2" + default MN10300_TTYSM0_TIMER10 + depends on MN10300_TTYSM2 + +config MN10300_TTYSM2_TIMER10 + bool "Use timer 10 (16-bit)" + +endchoice + +config MN10300_TTYSM2_CTS + bool "Enable the use of the CTS line /dev/ttySM2" + depends on MN10300_TTYSM2 + +endmenu + +source "mm/Kconfig" + +menu "Power management options" +source kernel/power/Kconfig +endmenu + +endmenu + + +menu "Executable formats" + +source "fs/Kconfig.binfmt" + +endmenu + +source "net/Kconfig" + +source "drivers/Kconfig" + +source "fs/Kconfig" + +source "arch/mn10300/Kconfig.debug" + +source "security/Kconfig" + +source "crypto/Kconfig" + +source "lib/Kconfig" + +source "arch/mn10300/oprofile/Kconfig" |
