diff options
Diffstat (limited to 'arch/mips')
| -rw-r--r-- | arch/mips/include/asm/pmc-sierra/msp71xx/msp_gpio_macros.h | 343 | ||||
| -rw-r--r-- | arch/mips/pmc-sierra/Kconfig | 10 | ||||
| -rw-r--r-- | arch/mips/pmc-sierra/msp71xx/Makefile | 2 | ||||
| -rw-r--r-- | arch/mips/pmc-sierra/msp71xx/msp_eth.c | 187 |
4 files changed, 541 insertions, 1 deletions
diff --git a/arch/mips/include/asm/pmc-sierra/msp71xx/msp_gpio_macros.h b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_gpio_macros.h new file mode 100644 index 000000000000..156f320c69e7 --- /dev/null +++ b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_gpio_macros.h @@ -0,0 +1,343 @@ +/* + * + * Macros for external SMP-safe access to the PMC MSP71xx reference + * board GPIO pins + * + * Copyright 2010 PMC-Sierra, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __MSP_GPIO_MACROS_H__ +#define __MSP_GPIO_MACROS_H__ + +#include <msp_regops.h> +#include <msp_regs.h> + +#ifdef CONFIG_PMC_MSP7120_GW +#define MSP_NUM_GPIOS 20 +#else +#define MSP_NUM_GPIOS 28 +#endif + +/* -- GPIO Enumerations -- */ +enum msp_gpio_data { + MSP_GPIO_LO = 0, + MSP_GPIO_HI = 1, + MSP_GPIO_NONE, /* Special - Means pin is out of range */ + MSP_GPIO_TOGGLE, /* Special - Sets pin to opposite */ +}; + +enum msp_gpio_mode { + MSP_GPIO_INPUT = 0x0, + /* MSP_GPIO_ INTERRUPT = 0x1, Not supported yet */ + MSP_GPIO_UART_INPUT = 0x2, /* Only GPIO 4 or 5 */ + MSP_GPIO_OUTPUT = 0x8, + MSP_GPIO_UART_OUTPUT = 0x9, /* Only GPIO 2 or 3 */ + MSP_GPIO_PERIF_TIMERA = 0x9, /* Only GPIO 0 or 1 */ + MSP_GPIO_PERIF_TIMERB = 0xa, /* Only GPIO 0 or 1 */ + MSP_GPIO_UNKNOWN = 0xb, /* No such GPIO or mode */ +}; + +/* -- Static Tables -- */ + +/* Maps pins to data register */ +static volatile u32 * const MSP_GPIO_DATA_REGISTER[] = { + /* GPIO 0 and 1 on the first register */ + GPIO_DATA1_REG, GPIO_DATA1_REG, + /* GPIO 2, 3, 4, and 5 on the second register */ + GPIO_DATA2_REG, GPIO_DATA2_REG, GPIO_DATA2_REG, GPIO_DATA2_REG, + /* GPIO 6, 7, 8, and 9 on the third register */ + GPIO_DATA3_REG, GPIO_DATA3_REG, GPIO_DATA3_REG, GPIO_DATA3_REG, + /* GPIO 10, 11, 12, 13, 14, and 15 on the fourth register */ + GPIO_DATA4_REG, GPIO_DATA4_REG, GPIO_DATA4_REG, GPIO_DATA4_REG, + GPIO_DATA4_REG, GPIO_DATA4_REG, + /* GPIO 16 - 23 on the first strange EXTENDED register */ + EXTENDED_GPIO1_REG, EXTENDED_GPIO1_REG, EXTENDED_GPIO1_REG, + EXTENDED_GPIO1_REG, EXTENDED_GPIO1_REG, EXTENDED_GPIO1_REG, + EXTENDED_GPIO1_REG, EXTENDED_GPIO1_REG, + /* GPIO 24 - 27 on the second strange EXTENDED register */ + EXTENDED_GPIO2_REG, EXTENDED_GPIO2_REG, EXTENDED_GPIO2_REG, + EXTENDED_GPIO2_REG, +}; + +/* Maps pins to mode register */ +static volatile u32 * const MSP_GPIO_MODE_REGISTER[] = { + /* GPIO 0 and 1 on the first register */ + GPIO_CFG1_REG, GPIO_CFG1_REG, + /* GPIO 2, 3, 4, and 5 on the second register */ + GPIO_CFG2_REG, GPIO_CFG2_REG, GPIO_CFG2_REG, GPIO_CFG2_REG, + /* GPIO 6, 7, 8, and 9 on the third register */ + GPIO_CFG3_REG, GPIO_CFG3_REG, GPIO_CFG3_REG, GPIO_CFG3_REG, + /* GPIO 10, 11, 12, 13, 14, and 15 on the fourth register */ + GPIO_CFG4_REG, GPIO_CFG4_REG, GPIO_CFG4_REG, GPIO_CFG4_REG, + GPIO_CFG4_REG, GPIO_CFG4_REG, + /* GPIO 16 - 23 on the first strange EXTENDED register */ + EXTENDED_GPIO1_REG, EXTENDED_GPIO1_REG, EXTENDED_GPIO1_REG, + EXTENDED_GPIO1_REG, EXTENDED_GPIO1_REG, EXTENDED_GPIO1_REG, + EXTENDED_GPIO1_REG, EXTENDED_GPIO1_REG, + /* GPIO 24 - 27 on the second strange EXTENDED register */ + EXTENDED_GPIO2_REG, EXTENDED_GPIO2_REG, EXTENDED_GPIO2_REG, + EXTENDED_GPIO2_REG, +}; + +/* Maps 'basic' pins to relative offset from 0 per register */ +static int MSP_GPIO_OFFSET[] = { + /* GPIO 0 and 1 on the first register */ + 0, 0, + /* GPIO 2, 3, 4, and 5 on the second register */ + 2, 2, 2, 2, + /* GPIO 6, 7, 8, and 9 on the third register */ + 6, 6, 6, 6, + /* GPIO 10, 11, 12, 13, 14, and 15 on the fourth register */ + 10, 10, 10, 10, 10, 10, +}; + +/* Maps MODE to allowed pin mask */ +static unsigned int MSP_GPIO_MODE_ALLOWED[] = { + 0xffffffff, /* Mode 0 - INPUT */ + 0x00000, /* Mode 1 - INTERRUPT */ + 0x00030, /* Mode 2 - UART_INPUT (GPIO 4, 5)*/ + 0, 0, 0, 0, 0, /* Modes 3, 4, 5, 6, and 7 are reserved */ + 0xffffffff, /* Mode 8 - OUTPUT */ + 0x0000f, /* Mode 9 - UART_OUTPUT/ + PERF_TIMERA (GPIO 0, 1, 2, 3) */ + 0x00003, /* Mode a - PERF_TIMERB (GPIO 0, 1) */ + 0x00000, /* Mode b - Not really a mode! */ +}; + +/* -- Bit masks -- */ + +/* This gives you the 'register relative offset gpio' number */ +#define OFFSET_GPIO_NUMBER(gpio) (gpio - MSP_GPIO_OFFSET[gpio]) + +/* These take the 'register relative offset gpio' number */ +#define BASIC_DATA_REG_MASK(ogpio) (1 << ogpio) +#define BASIC_MODE_REG_VALUE(mode, ogpio) \ + (mode << BASIC_MODE_REG_SHIFT(ogpio)) +#define BASIC_MODE_REG_MASK(ogpio) \ + BASIC_MODE_REG_VALUE(0xf, ogpio) +#define BASIC_MODE_REG_SHIFT(ogpio) (ogpio * 4) +#define BASIC_MODE_REG_FROM_REG(data, ogpio) \ + ((data & BASIC_MODE_REG_MASK(ogpio)) >> BASIC_MODE_REG_SHIFT(ogpio)) + +/* These take the actual GPIO number (0 through 15) */ +#define BASIC_DATA_MASK(gpio) \ + BASIC_DATA_REG_MASK(OFFSET_GPIO_NUMBER(gpio)) +#define BASIC_MODE_MASK(gpio) \ + BASIC_MODE_REG_MASK(OFFSET_GPIO_NUMBER(gpio)) +#define BASIC_MODE(mode, gpio) \ + BASIC_MODE_REG_VALUE(mode, OFFSET_GPIO_NUMBER(gpio)) +#define BASIC_MODE_SHIFT(gpio) \ + BASIC_MODE_REG_SHIFT(OFFSET_GPIO_NUMBER(gpio)) +#define BASIC_MODE_FROM_REG(data, gpio) \ + BASIC_MODE_REG_FROM_REG(data, OFFSET_GPIO_NUMBER(gpio)) + +/* + * Each extended GPIO register is 32 bits long and is responsible for up to + * eight GPIOs. The least significant 16 bits contain the set and clear bit + * pair for each of the GPIOs. The most significant 16 bits contain the + * disable and enable bit pair for each of the GPIOs. For example, the + * extended GPIO reg for GPIOs 16-23 is as follows: + * + * 31: GPIO23_DISABLE + * ... + * 19: GPIO17_DISABLE + * 18: GPIO17_ENABLE + * 17: GPIO16_DISABLE + * 16: GPIO16_ENABLE + * ... + * 3: GPIO17_SET + * 2: GPIO17_CLEAR + * 1: GPIO16_SET + * 0: GPIO16_CLEAR + */ + +/* This gives the 'register relative offset gpio' number */ +#define EXTENDED_OFFSET_GPIO(gpio) (gpio < 24 ? gpio - 16 : gpio - 24) + +/* These take the 'register relative offset gpio' number */ +#define EXTENDED_REG_DISABLE(ogpio) (0x2 << ((ogpio * 2) + 16)) +#define EXTENDED_REG_ENABLE(ogpio) (0x1 << ((ogpio * 2) + 16)) +#define EXTENDED_REG_SET(ogpio) (0x2 << (ogpio * 2)) +#define EXTENDED_REG_CLR(ogpio) (0x1 << (ogpio * 2)) + +/* These take the actual GPIO number (16 through 27) */ +#define EXTENDED_DISABLE(gpio) \ + EXTENDED_REG_DISABLE(EXTENDED_OFFSET_GPIO(gpio)) +#define EXTENDED_ENABLE(gpio) \ + EXTENDED_REG_ENABLE(EXTENDED_OFFSET_GPIO(gpio)) +#define EXTENDED_SET(gpio) \ + EXTENDED_REG_SET(EXTENDED_OFFSET_GPIO(gpio)) +#define EXTENDED_CLR(gpio) \ + EXTENDED_REG_CLR(EXTENDED_OFFSET_GPIO(gpio)) + +#define EXTENDED_FULL_MASK (0xffffffff) + +/* -- API inline-functions -- */ + +/* + * Gets the current value of the specified pin + */ +static inline enum msp_gpio_data msp_gpio_pin_get(unsigned int gpio) +{ + u32 pinhi_mask = 0, pinhi_mask2 = 0; + + if (gpio >= MSP_NUM_GPIOS) + return MSP_GPIO_NONE; + + if (gpio < 16) { + pinhi_mask = BASIC_DATA_MASK(gpio); + } else { + /* + * Two cases are possible with the EXTENDED register: + * - In output mode (ENABLED flag set), check the CLR bit + * - In input mode (ENABLED flag not set), check the SET bit + */ + pinhi_mask = EXTENDED_ENABLE(gpio) | EXTENDED_CLR(gpio); + pinhi_mask2 = EXTENDED_SET(gpio); + } + if (((*MSP_GPIO_DATA_REGISTER[gpio] & pinhi_mask) == pinhi_mask) || + (*MSP_GPIO_DATA_REGISTER[gpio] & pinhi_mask2)) + return MSP_GPIO_HI; + else + return MSP_GPIO_LO; +} + +/* Sets the specified pin to the specified value */ +static inline void msp_gpio_pin_set(enum msp_gpio_data data, unsigned int gpio) +{ + if (gpio >= MSP_NUM_GPIOS) + return; + + if (gpio < 16) { + if (data == MSP_GPIO_TOGGLE) + toggle_reg32(MSP_GPIO_DATA_REGISTER[gpio], + BASIC_DATA_MASK(gpio)); + else if (data == MSP_GPIO_HI) + set_reg32(MSP_GPIO_DATA_REGISTER[gpio], + BASIC_DATA_MASK(gpio)); + else + clear_reg32(MSP_GPIO_DATA_REGISTER[gpio], + BASIC_DATA_MASK(gpio)); + } else { + if (data == MSP_GPIO_TOGGLE) { + /* Special ugly case: + * We have to read the CLR bit. + * If set, we write the CLR bit. + * If not, we write the SET bit. + */ + u32 tmpdata; + + custom_read_reg32(MSP_GPIO_DATA_REGISTER[gpio], + tmpdata); + if (tmpdata & EXTENDED_CLR(gpio)) + tmpdata = EXTENDED_CLR(gpio); + else + tmpdata = EXTENDED_SET(gpio); + custom_write_reg32(MSP_GPIO_DATA_REGISTER[gpio], + tmpdata); + } else { + u32 newdata; + + if (data == MSP_GPIO_HI) + newdata = EXTENDED_SET(gpio); + else + newdata = EXTENDED_CLR(gpio); + set_value_reg32(MSP_GPIO_DATA_REGISTER[gpio], + EXTENDED_FULL_MASK, newdata); + } + } +} + +/* Sets the specified pin to the specified value */ +static inline void msp_gpio_pin_hi(unsigned int gpio) +{ + msp_gpio_pin_set(MSP_GPIO_HI, gpio); +} + +/* Sets the specified pin to the specified value */ +static inline void msp_gpio_pin_lo(unsigned int gpio) +{ + msp_gpio_pin_set(MSP_GPIO_LO, gpio); +} + +/* Sets the specified pin to the opposite value */ +static inline void msp_gpio_pin_toggle(unsigned int gpio) +{ + msp_gpio_pin_set(MSP_GPIO_TOGGLE, gpio); +} + +/* Gets the mode of the specified pin */ +static inline enum msp_gpio_mode msp_gpio_pin_get_mode(unsigned int gpio) +{ + enum msp_gpio_mode retval = MSP_GPIO_UNKNOWN; + uint32_t data; + + if (gpio >= MSP_NUM_GPIOS) + return retval; + + data = *MSP_GPIO_MODE_REGISTER[gpio]; + + if (gpio < 16) { + retval = BASIC_MODE_FROM_REG(data, gpio); + } else { + /* Extended pins can only be either INPUT or OUTPUT */ + if (data & EXTENDED_ENABLE(gpio)) + retval = MSP_GPIO_OUTPUT; + else + retval = MSP_GPIO_INPUT; + } + + return retval; +} + +/* + * Sets the specified mode on the requested pin + * Returns 0 on success, or -1 if that mode is not allowed on this pin + */ +static inline int msp_gpio_pin_mode(enum msp_gpio_mode mode, unsigned int gpio) +{ + u32 modemask, newmode; + + if ((1 << gpio) & ~MSP_GPIO_MODE_ALLOWED[mode]) + return -1; + + if (gpio >= MSP_NUM_GPIOS) + return -1; + + if (gpio < 16) { + modemask = BASIC_MODE_MASK(gpio); + newmode = BASIC_MODE(mode, gpio); + } else { + modemask = EXTENDED_FULL_MASK; + if (mode == MSP_GPIO_INPUT) + newmode = EXTENDED_DISABLE(gpio); + else + newmode = EXTENDED_ENABLE(gpio); + } + /* Do the set atomically */ + set_value_reg32(MSP_GPIO_MODE_REGISTER[gpio], modemask, newmode); + + return 0; +} + +#endif /* __MSP_GPIO_MACROS_H__ */ diff --git a/arch/mips/pmc-sierra/Kconfig b/arch/mips/pmc-sierra/Kconfig index c437b8a8ab8c..bbd76082fa8c 100644 --- a/arch/mips/pmc-sierra/Kconfig +++ b/arch/mips/pmc-sierra/Kconfig @@ -24,6 +24,7 @@ config PMC_MSP7120_GW select IRQ_MSP_CIC select HW_HAS_PCI select MSP_HAS_USB + select MSP_ETH config PMC_MSP7120_FPGA bool "PMC-Sierra MSP7120 FPGA" @@ -40,3 +41,12 @@ config HYPERTRANSPORT config MSP_HAS_USB boolean depends on PMC_MSP + +config MSP_ETH + boolean + select MSP_HAS_MAC + depends on PMC_MSP + +config MSP_HAS_MAC + boolean + depends on PMC_MSP diff --git a/arch/mips/pmc-sierra/msp71xx/Makefile b/arch/mips/pmc-sierra/msp71xx/Makefile index f26cab349c38..cefba7733b73 100644 --- a/arch/mips/pmc-sierra/msp71xx/Makefile +++ b/arch/mips/pmc-sierra/msp71xx/Makefile @@ -8,7 +8,7 @@ obj-$(CONFIG_PMC_MSP7120_GW) += msp_hwbutton.o obj-$(CONFIG_IRQ_MSP_SLP) += msp_irq_slp.o obj-$(CONFIG_IRQ_MSP_CIC) += msp_irq_cic.o msp_irq_per.o obj-$(CONFIG_PCI) += msp_pci.o -obj-$(CONFIG_MSPETH) += msp_eth.o +obj-$(CONFIG_MSP_HAS_MAC) += msp_eth.o obj-$(CONFIG_MSP_HAS_USB) += msp_usb.o obj-$(CONFIG_MIPS_MT_SMP) += msp_smp.o obj-$(CONFIG_MIPS_MT_SMTC) += msp_smtc.o diff --git a/arch/mips/pmc-sierra/msp71xx/msp_eth.c b/arch/mips/pmc-sierra/msp71xx/msp_eth.c new file mode 100644 index 000000000000..c584df393de2 --- /dev/null +++ b/arch/mips/pmc-sierra/msp71xx/msp_eth.c @@ -0,0 +1,187 @@ +/* + * The setup file for ethernet related hardware on PMC-Sierra MSP processors. + * + * Copyright 2010 PMC-Sierra, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/ioport.h> +#include <linux/platform_device.h> +#include <linux/delay.h> +#include <msp_regs.h> +#include <msp_int.h> +#include <msp_gpio_macros.h> + + +#define MSP_ETHERNET_GPIO0 14 +#define MSP_ETHERNET_GPIO1 15 +#define MSP_ETHERNET_GPIO2 16 + +#ifdef CONFIG_MSP_HAS_TSMAC +#define MSP_TSMAC_SIZE 0x10020 +#define MSP_TSMAC_ID "pmc_tsmac" + +static struct resource msp_tsmac0_resources[] = { + [0] = { + .start = MSP_MAC0_BASE, + .end = MSP_MAC0_BASE + MSP_TSMAC_SIZE - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = MSP_INT_MAC0, + .end = MSP_INT_MAC0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource msp_tsmac1_resources[] = { + [0] = { + .start = MSP_MAC1_BASE, + .end = MSP_MAC1_BASE + MSP_TSMAC_SIZE - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = MSP_INT_MAC1, + .end = MSP_INT_MAC1, + .flags = IORESOURCE_IRQ, + }, +}; +static struct resource msp_tsmac2_resources[] = { + [0] = { + .start = MSP_MAC2_BASE, + .end = MSP_MAC2_BASE + MSP_TSMAC_SIZE - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = MSP_INT_SAR, + .end = MSP_INT_SAR, + .flags = IORESOURCE_IRQ, + }, +}; + + +static struct platform_device tsmac_device[] = { + [0] = { + .name = MSP_TSMAC_ID, + .id = 0, + .num_resources = ARRAY_SIZE(msp_tsmac0_resources), + .resource = msp_tsmac0_resources, + }, + [1] = { + .name = MSP_TSMAC_ID, + .id = 1, + .num_resources = ARRAY_SIZE(msp_tsmac1_resources), + .resource = msp_tsmac1_resources, + }, + [2] = { + .name = MSP_TSMAC_ID, + .id = 2, + .num_resources = ARRAY_SIZE(msp_tsmac2_resources), + .resource = msp_tsmac2_resources, + }, +}; +#define msp_eth_devs tsmac_device + +#else +/* If it is not TSMAC assume MSP_ETH (100Mbps) */ +#define MSP_ETH_ID "pmc_mspeth" +#define MSP_ETH_SIZE 0xE0 +static struct resource msp_eth0_resources[] = { + [0] = { + .start = MSP_MAC0_BASE, + .end = MSP_MAC0_BASE + MSP_ETH_SIZE - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = MSP_INT_MAC0, + .end = MSP_INT_MAC0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource msp_eth1_resources[] = { + [0] = { + .start = MSP_MAC1_BASE, + .end = MSP_MAC1_BASE + MSP_ETH_SIZE - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = MSP_INT_MAC1, + .end = MSP_INT_MAC1, + .flags = IORESOURCE_IRQ, + }, +}; + + + +static struct platform_device mspeth_device[] = { + [0] = { + .name = MSP_ETH_ID, + .id = 0, + .num_resources = ARRAY_SIZE(msp_eth0_resources), + .resource = msp_eth0_resources, + }, + [1] = { + .name = MSP_ETH_ID, + .id = 1, + .num_resources = ARRAY_SIZE(msp_eth1_resources), + .resource = msp_eth1_resources, + }, + +}; +#define msp_eth_devs mspeth_device + +#endif +int __init msp_eth_setup(void) +{ + int i, ret = 0; + + /* Configure the GPIO and take the ethernet PHY out of reset */ + msp_gpio_pin_mode(MSP_GPIO_OUTPUT, MSP_ETHERNET_GPIO0); + msp_gpio_pin_hi(MSP_ETHERNET_GPIO0); + +#ifdef CONFIG_MSP_HAS_TSMAC + /* 3 phys on boards with TSMAC */ + msp_gpio_pin_mode(MSP_GPIO_OUTPUT, MSP_ETHERNET_GPIO1); + msp_gpio_pin_hi(MSP_ETHERNET_GPIO1); + + msp_gpio_pin_mode(MSP_GPIO_OUTPUT, MSP_ETHERNET_GPIO2); + msp_gpio_pin_hi(MSP_ETHERNET_GPIO2); +#endif + for (i = 0; i < ARRAY_SIZE(msp_eth_devs); i++) { + ret = platform_device_register(&msp_eth_devs[i]); + printk(KERN_INFO "device: %d, return value = %d\n", i, ret); + if (ret) { + platform_device_unregister(&msp_eth_devs[i]); + break; + } + } + + if (ret) + printk(KERN_WARNING "Could not initialize " + "MSPETH device structures.\n"); + + return ret; +} +subsys_initcall(msp_eth_setup); |
