summaryrefslogtreecommitdiffstats
path: root/arch/mips/sgi-ip27
diff options
context:
space:
mode:
Diffstat (limited to 'arch/mips/sgi-ip27')
-rw-r--r--arch/mips/sgi-ip27/Kconfig2
-rw-r--r--arch/mips/sgi-ip27/TODO2
-rw-r--r--arch/mips/sgi-ip27/ip27-init.c2
-rw-r--r--arch/mips/sgi-ip27/ip27-irq.c42
-rw-r--r--arch/mips/sgi-ip27/ip27-timer.c13
5 files changed, 28 insertions, 33 deletions
diff --git a/arch/mips/sgi-ip27/Kconfig b/arch/mips/sgi-ip27/Kconfig
index 5e960ae9735a..bc5e9769bb73 100644
--- a/arch/mips/sgi-ip27/Kconfig
+++ b/arch/mips/sgi-ip27/Kconfig
@@ -1,7 +1,7 @@
#config SGI_SN0_XXL
# bool "IP27 XXL"
# depends on SGI_IP27
-# This options adds support for userspace processes upto 16TB size.
+# This options adds support for userspace processes up to 16TB size.
# Normally the limit is just .5TB.
choice
diff --git a/arch/mips/sgi-ip27/TODO b/arch/mips/sgi-ip27/TODO
index 19f1512c8f2e..160857ff1483 100644
--- a/arch/mips/sgi-ip27/TODO
+++ b/arch/mips/sgi-ip27/TODO
@@ -13,7 +13,7 @@ being invoked on all nodes in ip27-memory.c.
9. start_thread must turn off UX64 ... and define tlb_refill_debug.
10. Need a bad pmd table, bad pte table. __bad_pmd_table/__bad_pagetable
does not agree with pgd_bad/pmd_bad.
-11. All intrs (ip27_do_irq handlers) are targetted at cpu A on the node.
+11. All intrs (ip27_do_irq handlers) are targeted at cpu A on the node.
This might need to change later. Only the timer intr is set up to be
received on both Cpu A and B. (ip27_do_irq()/bridge_startup())
13. Cache flushing (specially the SMP version) has to be investigated.
diff --git a/arch/mips/sgi-ip27/ip27-init.c b/arch/mips/sgi-ip27/ip27-init.c
index 51d3a4f2d7e1..923c080f77bd 100644
--- a/arch/mips/sgi-ip27/ip27-init.c
+++ b/arch/mips/sgi-ip27/ip27-init.c
@@ -93,7 +93,7 @@ static void __cpuinit per_hub_init(cnodeid_t cnode)
/*
* Some interrupts are reserved by hardware or by software convention.
- * Mark these as reserved right away so they won't be used accidently
+ * Mark these as reserved right away so they won't be used accidentally
* later.
*/
for (i = 0; i <= BASE_PCI_IRQ; i++) {
diff --git a/arch/mips/sgi-ip27/ip27-irq.c b/arch/mips/sgi-ip27/ip27-irq.c
index 6a123ea72de5..0a04603d577c 100644
--- a/arch/mips/sgi-ip27/ip27-irq.c
+++ b/arch/mips/sgi-ip27/ip27-irq.c
@@ -41,7 +41,7 @@
* Linux has a controller-independent x86 interrupt architecture.
* every controller has a 'controller-template', that is used
* by the main code to do the right thing. Each driver-visible
- * interrupt source is transparently wired to the apropriate
+ * interrupt source is transparently wired to the appropriate
* controller. Thus drivers need not be aware of the
* interrupt-controller.
*
@@ -240,7 +240,7 @@ static int intr_disconnect_level(int cpu, int bit)
}
/* Startup one of the (PCI ...) IRQs routes over a bridge. */
-static unsigned int startup_bridge_irq(unsigned int irq)
+static unsigned int startup_bridge_irq(struct irq_data *d)
{
struct bridge_controller *bc;
bridgereg_t device;
@@ -248,16 +248,16 @@ static unsigned int startup_bridge_irq(unsigned int irq)
int pin, swlevel;
cpuid_t cpu;
- pin = SLOT_FROM_PCI_IRQ(irq);
- bc = IRQ_TO_BRIDGE(irq);
+ pin = SLOT_FROM_PCI_IRQ(d->irq);
+ bc = IRQ_TO_BRIDGE(d->irq);
bridge = bc->base;
- pr_debug("bridge_startup(): irq= 0x%x pin=%d\n", irq, pin);
+ pr_debug("bridge_startup(): irq= 0x%x pin=%d\n", d->irq, pin);
/*
* "map" irq to a swlevel greater than 6 since the first 6 bits
* of INT_PEND0 are taken
*/
- swlevel = find_level(&cpu, irq);
+ swlevel = find_level(&cpu, d->irq);
bridge->b_int_addr[pin].addr = (0x20000 | swlevel | (bc->nasid << 8));
bridge->b_int_enable |= (1 << pin);
bridge->b_int_enable |= 0x7ffffe00; /* more stuff in int_enable */
@@ -288,58 +288,56 @@ static unsigned int startup_bridge_irq(unsigned int irq)
}
/* Shutdown one of the (PCI ...) IRQs routes over a bridge. */
-static void shutdown_bridge_irq(unsigned int irq)
+static void shutdown_bridge_irq(struct irq_data *d)
{
- struct bridge_controller *bc = IRQ_TO_BRIDGE(irq);
+ struct bridge_controller *bc = IRQ_TO_BRIDGE(d->irq);
bridge_t *bridge = bc->base;
int pin, swlevel;
cpuid_t cpu;
- pr_debug("bridge_shutdown: irq 0x%x\n", irq);
- pin = SLOT_FROM_PCI_IRQ(irq);
+ pr_debug("bridge_shutdown: irq 0x%x\n", d->irq);
+ pin = SLOT_FROM_PCI_IRQ(d->irq);
/*
* map irq to a swlevel greater than 6 since the first 6 bits
* of INT_PEND0 are taken
*/
- swlevel = find_level(&cpu, irq);
+ swlevel = find_level(&cpu, d->irq);
intr_disconnect_level(cpu, swlevel);
bridge->b_int_enable &= ~(1 << pin);
bridge->b_wid_tflush;
}
-static inline void enable_bridge_irq(unsigned int irq)
+static inline void enable_bridge_irq(struct irq_data *d)
{
cpuid_t cpu;
int swlevel;
- swlevel = find_level(&cpu, irq); /* Criminal offence */
+ swlevel = find_level(&cpu, d->irq); /* Criminal offence */
intr_connect_level(cpu, swlevel);
}
-static inline void disable_bridge_irq(unsigned int irq)
+static inline void disable_bridge_irq(struct irq_data *d)
{
cpuid_t cpu;
int swlevel;
- swlevel = find_level(&cpu, irq); /* Criminal offence */
+ swlevel = find_level(&cpu, d->irq); /* Criminal offence */
intr_disconnect_level(cpu, swlevel);
}
static struct irq_chip bridge_irq_type = {
.name = "bridge",
- .startup = startup_bridge_irq,
- .shutdown = shutdown_bridge_irq,
- .ack = disable_bridge_irq,
- .mask = disable_bridge_irq,
- .mask_ack = disable_bridge_irq,
- .unmask = enable_bridge_irq,
+ .irq_startup = startup_bridge_irq,
+ .irq_shutdown = shutdown_bridge_irq,
+ .irq_mask = disable_bridge_irq,
+ .irq_unmask = enable_bridge_irq,
};
void __devinit register_bridge_irq(unsigned int irq)
{
- set_irq_chip_and_handler(irq, &bridge_irq_type, handle_level_irq);
+ irq_set_chip_and_handler(irq, &bridge_irq_type, handle_level_irq);
}
int __devinit request_bridge_irq(struct bridge_controller *bc)
diff --git a/arch/mips/sgi-ip27/ip27-timer.c b/arch/mips/sgi-ip27/ip27-timer.c
index 3cac88382d4c..8d0d2690e962 100644
--- a/arch/mips/sgi-ip27/ip27-timer.c
+++ b/arch/mips/sgi-ip27/ip27-timer.c
@@ -36,21 +36,18 @@
#include <asm/sn/sn0/hubio.h>
#include <asm/pci/bridge.h>
-static void enable_rt_irq(unsigned int irq)
+static void enable_rt_irq(struct irq_data *d)
{
}
-static void disable_rt_irq(unsigned int irq)
+static void disable_rt_irq(struct irq_data *d)
{
}
static struct irq_chip rt_irq_type = {
.name = "SN HUB RT timer",
- .ack = disable_rt_irq,
- .mask = disable_rt_irq,
- .mask_ack = disable_rt_irq,
- .unmask = enable_rt_irq,
- .eoi = enable_rt_irq,
+ .irq_mask = disable_rt_irq,
+ .irq_unmask = enable_rt_irq,
};
static int rt_next_event(unsigned long delta, struct clock_event_device *evt)
@@ -156,7 +153,7 @@ static void __init hub_rt_clock_event_global_init(void)
panic("Allocation of irq number for timer failed");
} while (xchg(&rt_timer_irq, irq));
- set_irq_chip_and_handler(irq, &rt_irq_type, handle_percpu_irq);
+ irq_set_chip_and_handler(irq, &rt_irq_type, handle_percpu_irq);
setup_irq(irq, &hub_rt_irqaction);
}
OpenPOWER on IntegriCloud