diff options
Diffstat (limited to 'arch/mips/pci')
| -rw-r--r-- | arch/mips/pci/Makefile | 3 | ||||
| -rw-r--r-- | arch/mips/pci/fixup-lemote2f.c | 160 | ||||
| -rw-r--r-- | arch/mips/pci/ops-loongson2.c (renamed from arch/mips/pci/ops-fuloong2e.c) | 54 |
3 files changed, 216 insertions, 1 deletions
diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile index 0610c869852d..c9a0dc122237 100644 --- a/arch/mips/pci/Makefile +++ b/arch/mips/pci/Makefile @@ -28,7 +28,8 @@ obj-$(CONFIG_MIPS_COBALT) += fixup-cobalt.o obj-$(CONFIG_SOC_AU1500) += fixup-au1000.o ops-au1000.o obj-$(CONFIG_SOC_AU1550) += fixup-au1000.o ops-au1000.o obj-$(CONFIG_SOC_PNX8550) += fixup-pnx8550.o ops-pnx8550.o -obj-$(CONFIG_LEMOTE_FULOONG2E) += fixup-fuloong2e.o ops-fuloong2e.o +obj-$(CONFIG_LEMOTE_FULOONG2E) += fixup-fuloong2e.o ops-loongson2.o +obj-$(CONFIG_LEMOTE_MACH2F) += fixup-lemote2f.o ops-loongson2.o obj-$(CONFIG_MIPS_MALTA) += fixup-malta.o obj-$(CONFIG_PMC_MSP7120_GW) += fixup-pmcmsp.o ops-pmcmsp.o obj-$(CONFIG_PMC_MSP7120_EVAL) += fixup-pmcmsp.o ops-pmcmsp.o diff --git a/arch/mips/pci/fixup-lemote2f.c b/arch/mips/pci/fixup-lemote2f.c new file mode 100644 index 000000000000..caf2edeb02f0 --- /dev/null +++ b/arch/mips/pci/fixup-lemote2f.c @@ -0,0 +1,160 @@ +/* + * Copyright (C) 2008 Lemote Technology + * Copyright (C) 2004 ICT CAS + * Author: Li xiaoyu, lixy@ict.ac.cn + * + * Copyright (C) 2007 Lemote, Inc. + * Author: Fuxin Zhang, zhangfx@lemote.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#include <linux/init.h> +#include <linux/pci.h> + +#include <loongson.h> +#include <cs5536/cs5536.h> +#include <cs5536/cs5536_pci.h> + +/* PCI interrupt pins + * + * These should not be changed, or you should consider loongson2f interrupt + * register and your pci card dispatch + */ + +#define PCIA 4 +#define PCIB 5 +#define PCIC 6 +#define PCID 7 + +/* all the pci device has the PCIA pin, check the datasheet. */ +static char irq_tab[][5] __initdata = { + /* INTA INTB INTC INTD */ + {0, 0, 0, 0, 0}, /* 11: Unused */ + {0, 0, 0, 0, 0}, /* 12: Unused */ + {0, 0, 0, 0, 0}, /* 13: Unused */ + {0, 0, 0, 0, 0}, /* 14: Unused */ + {0, 0, 0, 0, 0}, /* 15: Unused */ + {0, 0, 0, 0, 0}, /* 16: Unused */ + {0, PCIA, 0, 0, 0}, /* 17: RTL8110-0 */ + {0, PCIB, 0, 0, 0}, /* 18: RTL8110-1 */ + {0, PCIC, 0, 0, 0}, /* 19: SiI3114 */ + {0, PCID, 0, 0, 0}, /* 20: 3-ports nec usb */ + {0, PCIA, PCIB, PCIC, PCID}, /* 21: PCI-SLOT */ + {0, 0, 0, 0, 0}, /* 22: Unused */ + {0, 0, 0, 0, 0}, /* 23: Unused */ + {0, 0, 0, 0, 0}, /* 24: Unused */ + {0, 0, 0, 0, 0}, /* 25: Unused */ + {0, 0, 0, 0, 0}, /* 26: Unused */ + {0, 0, 0, 0, 0}, /* 27: Unused */ +}; + +int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +{ + int virq; + + if ((PCI_SLOT(dev->devfn) != PCI_IDSEL_CS5536) + && (PCI_SLOT(dev->devfn) < 32)) { + virq = irq_tab[slot][pin]; + printk(KERN_INFO "slot: %d, pin: %d, irq: %d\n", slot, pin, + virq + LOONGSON_IRQ_BASE); + if (virq != 0) + return LOONGSON_IRQ_BASE + virq; + else + return 0; + } else if (PCI_SLOT(dev->devfn) == PCI_IDSEL_CS5536) { /* cs5536 */ + switch (PCI_FUNC(dev->devfn)) { + case 2: + pci_write_config_byte(dev, PCI_INTERRUPT_LINE, + CS5536_IDE_INTR); + return CS5536_IDE_INTR; /* for IDE */ + case 3: + pci_write_config_byte(dev, PCI_INTERRUPT_LINE, + CS5536_ACC_INTR); + return CS5536_ACC_INTR; /* for AUDIO */ + case 4: /* for OHCI */ + case 5: /* for EHCI */ + case 6: /* for UDC */ + case 7: /* for OTG */ + pci_write_config_byte(dev, PCI_INTERRUPT_LINE, + CS5536_USB_INTR); + return CS5536_USB_INTR; + } + return dev->irq; + } else { + printk(KERN_INFO " strange pci slot number.\n"); + return 0; + } +} + +/* Do platform specific device initialization at pci_enable_device() time */ +int pcibios_plat_dev_init(struct pci_dev *dev) +{ + return 0; +} + +/* CS5536 SPEC. fixup */ +static void __init loongson_cs5536_isa_fixup(struct pci_dev *pdev) +{ + /* the uart1 and uart2 interrupt in PIC is enabled as default */ + pci_write_config_dword(pdev, PCI_UART1_INT_REG, 1); + pci_write_config_dword(pdev, PCI_UART2_INT_REG, 1); +} + +static void __init loongson_cs5536_ide_fixup(struct pci_dev *pdev) +{ + /* setting the mutex pin as IDE function */ + pci_write_config_dword(pdev, PCI_IDE_CFG_REG, + CS5536_IDE_FLASH_SIGNATURE); +} + +static void __init loongson_cs5536_acc_fixup(struct pci_dev *pdev) +{ + /* enable the AUDIO interrupt in PIC */ + pci_write_config_dword(pdev, PCI_ACC_INT_REG, 1); + + pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0xc0); +} + +static void __init loongson_cs5536_ohci_fixup(struct pci_dev *pdev) +{ + /* enable the OHCI interrupt in PIC */ + /* THE OHCI, EHCI, UDC, OTG are shared with interrupt in PIC */ + pci_write_config_dword(pdev, PCI_OHCI_INT_REG, 1); +} + +static void __init loongson_cs5536_ehci_fixup(struct pci_dev *pdev) +{ + u32 hi, lo; + + /* Serial short detect enable */ + _rdmsr(USB_MSR_REG(USB_CONFIG), &hi, &lo); + _wrmsr(USB_MSR_REG(USB_CONFIG), (1 << 1) | (1 << 2) | (1 << 3), lo); + + /* setting the USB2.0 micro frame length */ + pci_write_config_dword(pdev, PCI_EHCI_FLADJ_REG, 0x2000); +} + +static void __init loongson_nec_fixup(struct pci_dev *pdev) +{ + unsigned int val; + + pci_read_config_dword(pdev, 0xe0, &val); + /* Only 2 port be used */ + pci_write_config_dword(pdev, 0xe0, (val & ~3) | 0x2); +} + +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA, + loongson_cs5536_isa_fixup); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_OHC, + loongson_cs5536_ohci_fixup); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_EHC, + loongson_cs5536_ehci_fixup); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_AUDIO, + loongson_cs5536_acc_fixup); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_IDE, + loongson_cs5536_ide_fixup); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_USB, + loongson_nec_fixup); diff --git a/arch/mips/pci/ops-fuloong2e.c b/arch/mips/pci/ops-loongson2.c index 171f65c99ca1..aa5d3da27212 100644 --- a/arch/mips/pci/ops-fuloong2e.c +++ b/arch/mips/pci/ops-loongson2.c @@ -20,6 +20,11 @@ #include <loongson.h> +#ifdef CONFIG_CS5536 +#include <cs5536/cs5536_pci.h> +#include <cs5536/cs5536.h> +#endif + #define PCI_ACCESS_READ 0 #define PCI_ACCESS_WRITE 1 @@ -43,6 +48,29 @@ static int loongson_pcibios_config_access(unsigned char access_type, int reg = where & ~3; if (busnum == 0) { + /* board-specific part,currently,only fuloong2f,yeeloong2f + * use CS5536, fuloong2e use via686b, gdium has no + * south bridge + */ +#ifdef CONFIG_CS5536 + /* cs5536_pci_conf_read4/write4() will call _rdmsr/_wrmsr() to + * access the regsters PCI_MSR_ADDR, PCI_MSR_DATA_LO, + * PCI_MSR_DATA_HI, which is bigger than PCI_MSR_CTRL, so, it + * will not go this branch, but the others. so, no calling dead + * loop here. + */ + if ((PCI_IDSEL_CS5536 == device) && (reg < PCI_MSR_CTRL)) { + switch (access_type) { + case PCI_ACCESS_READ: + *data = cs5536_pci_conf_read4(function, reg); + break; + case PCI_ACCESS_WRITE: + cs5536_pci_conf_write4(function, reg, *data); + break; + } + return 0; + } +#endif /* Type 0 configuration for onboard PCI bus */ if (device > MAX_DEV_NUM) return -1; @@ -152,3 +180,29 @@ struct pci_ops loongson_pci_ops = { .read = loongson_pcibios_read, .write = loongson_pcibios_write }; + +#ifdef CONFIG_CS5536 +void _rdmsr(u32 msr, u32 *hi, u32 *lo) +{ + struct pci_bus bus = { + .number = PCI_BUS_CS5536 + }; + u32 devfn = PCI_DEVFN(PCI_IDSEL_CS5536, 0); + loongson_pcibios_write(&bus, devfn, PCI_MSR_ADDR, 4, msr); + loongson_pcibios_read(&bus, devfn, PCI_MSR_DATA_LO, 4, lo); + loongson_pcibios_read(&bus, devfn, PCI_MSR_DATA_HI, 4, hi); +} +EXPORT_SYMBOL(_rdmsr); + +void _wrmsr(u32 msr, u32 hi, u32 lo) +{ + struct pci_bus bus = { + .number = PCI_BUS_CS5536 + }; + u32 devfn = PCI_DEVFN(PCI_IDSEL_CS5536, 0); + loongson_pcibios_write(&bus, devfn, PCI_MSR_ADDR, 4, msr); + loongson_pcibios_write(&bus, devfn, PCI_MSR_DATA_LO, 4, lo); + loongson_pcibios_write(&bus, devfn, PCI_MSR_DATA_HI, 4, hi); +} +EXPORT_SYMBOL(_wrmsr); +#endif |
