diff options
Diffstat (limited to 'arch/mips/nxp')
25 files changed, 2 insertions, 2107 deletions
diff --git a/arch/mips/nxp/pnx833x/common/Makefile b/arch/mips/nxp/pnx833x/common/Makefile deleted file mode 100644 index 4a16f3b503b5..000000000000 --- a/arch/mips/nxp/pnx833x/common/Makefile +++ /dev/null @@ -1,3 +0,0 @@ -obj-y := interrupts.o platform.o prom.o setup.o reset.o - -EXTRA_CFLAGS += -Werror diff --git a/arch/mips/nxp/pnx833x/common/interrupts.c b/arch/mips/nxp/pnx833x/common/interrupts.c deleted file mode 100644 index 941916f8aaff..000000000000 --- a/arch/mips/nxp/pnx833x/common/interrupts.c +++ /dev/null @@ -1,379 +0,0 @@ -/* - * interrupts.c: Interrupt mappings for PNX833X. - * - * Copyright 2008 NXP Semiconductors - * Chris Steel <chris.steel@nxp.com> - * Daniel Laird <daniel.j.laird@nxp.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ -#include <linux/kernel.h> -#include <linux/irq.h> -#include <linux/hardirq.h> -#include <linux/interrupt.h> -#include <asm/mipsregs.h> -#include <asm/irq_cpu.h> -#include <irq.h> -#include <irq-mapping.h> -#include <gpio.h> - -static int mips_cpu_timer_irq; - -static const unsigned int irq_prio[PNX833X_PIC_NUM_IRQ] = -{ - 0, /* unused */ - 4, /* PNX833X_PIC_I2C0_INT 1 */ - 4, /* PNX833X_PIC_I2C1_INT 2 */ - 1, /* PNX833X_PIC_UART0_INT 3 */ - 1, /* PNX833X_PIC_UART1_INT 4 */ - 6, /* PNX833X_PIC_TS_IN0_DV_INT 5 */ - 6, /* PNX833X_PIC_TS_IN0_DMA_INT 6 */ - 7, /* PNX833X_PIC_GPIO_INT 7 */ - 4, /* PNX833X_PIC_AUDIO_DEC_INT 8 */ - 5, /* PNX833X_PIC_VIDEO_DEC_INT 9 */ - 4, /* PNX833X_PIC_CONFIG_INT 10 */ - 4, /* PNX833X_PIC_AOI_INT 11 */ - 9, /* PNX833X_PIC_SYNC_INT 12 */ - 9, /* PNX8335_PIC_SATA_INT 13 */ - 4, /* PNX833X_PIC_OSD_INT 14 */ - 9, /* PNX833X_PIC_DISP1_INT 15 */ - 4, /* PNX833X_PIC_DEINTERLACER_INT 16 */ - 9, /* PNX833X_PIC_DISPLAY2_INT 17 */ - 4, /* PNX833X_PIC_VC_INT 18 */ - 4, /* PNX833X_PIC_SC_INT 19 */ - 9, /* PNX833X_PIC_IDE_INT 20 */ - 9, /* PNX833X_PIC_IDE_DMA_INT 21 */ - 6, /* PNX833X_PIC_TS_IN1_DV_INT 22 */ - 6, /* PNX833X_PIC_TS_IN1_DMA_INT 23 */ - 4, /* PNX833X_PIC_SGDX_DMA_INT 24 */ - 4, /* PNX833X_PIC_TS_OUT_INT 25 */ - 4, /* PNX833X_PIC_IR_INT 26 */ - 3, /* PNX833X_PIC_VMSP1_INT 27 */ - 3, /* PNX833X_PIC_VMSP2_INT 28 */ - 4, /* PNX833X_PIC_PIBC_INT 29 */ - 4, /* PNX833X_PIC_TS_IN0_TRD_INT 30 */ - 4, /* PNX833X_PIC_SGDX_TPD_INT 31 */ - 5, /* PNX833X_PIC_USB_INT 32 */ - 4, /* PNX833X_PIC_TS_IN1_TRD_INT 33 */ - 4, /* PNX833X_PIC_CLOCK_INT 34 */ - 4, /* PNX833X_PIC_SGDX_PARSER_INT 35 */ - 4, /* PNX833X_PIC_VMSP_DMA_INT 36 */ -#if defined(CONFIG_SOC_PNX8335) - 4, /* PNX8335_PIC_MIU_INT 37 */ - 4, /* PNX8335_PIC_AVCHIP_IRQ_INT 38 */ - 9, /* PNX8335_PIC_SYNC_HD_INT 39 */ - 9, /* PNX8335_PIC_DISP_HD_INT 40 */ - 9, /* PNX8335_PIC_DISP_SCALER_INT 41 */ - 4, /* PNX8335_PIC_OSD_HD1_INT 42 */ - 4, /* PNX8335_PIC_DTL_WRITER_Y_INT 43 */ - 4, /* PNX8335_PIC_DTL_WRITER_C_INT 44 */ - 4, /* PNX8335_PIC_DTL_EMULATOR_Y_IR_INT 45 */ - 4, /* PNX8335_PIC_DTL_EMULATOR_C_IR_INT 46 */ - 4, /* PNX8335_PIC_DENC_TTX_INT 47 */ - 4, /* PNX8335_PIC_MMI_SIF0_INT 48 */ - 4, /* PNX8335_PIC_MMI_SIF1_INT 49 */ - 4, /* PNX8335_PIC_MMI_CDMMU_INT 50 */ - 4, /* PNX8335_PIC_PIBCS_INT 51 */ - 12, /* PNX8335_PIC_ETHERNET_INT 52 */ - 3, /* PNX8335_PIC_VMSP1_0_INT 53 */ - 3, /* PNX8335_PIC_VMSP1_1_INT 54 */ - 4, /* PNX8335_PIC_VMSP1_DMA_INT 55 */ - 4, /* PNX8335_PIC_TDGR_DE_INT 56 */ - 4, /* PNX8335_PIC_IR1_IRQ_INT 57 */ -#endif -}; - -static void pnx833x_timer_dispatch(void) -{ - do_IRQ(mips_cpu_timer_irq); -} - -static void pic_dispatch(void) -{ - unsigned int irq = PNX833X_REGFIELD(PIC_INT_SRC, INT_SRC); - - if ((irq >= 1) && (irq < (PNX833X_PIC_NUM_IRQ))) { - unsigned long priority = PNX833X_PIC_INT_PRIORITY; - PNX833X_PIC_INT_PRIORITY = irq_prio[irq]; - - if (irq == PNX833X_PIC_GPIO_INT) { - unsigned long mask = PNX833X_PIO_INT_STATUS & PNX833X_PIO_INT_ENABLE; - int pin; - while ((pin = ffs(mask & 0xffff))) { - pin -= 1; - do_IRQ(PNX833X_GPIO_IRQ_BASE + pin); - mask &= ~(1 << pin); - } - } else { - do_IRQ(irq + PNX833X_PIC_IRQ_BASE); - } - - PNX833X_PIC_INT_PRIORITY = priority; - } else { - printk(KERN_ERR "plat_irq_dispatch: unexpected irq %u\n", irq); - } -} - -asmlinkage void plat_irq_dispatch(void) -{ - unsigned int pending = read_c0_status() & read_c0_cause(); - - if (pending & STATUSF_IP4) - pic_dispatch(); - else if (pending & STATUSF_IP7) - do_IRQ(PNX833X_TIMER_IRQ); - else - spurious_interrupt(); -} - -static inline void pnx833x_hard_enable_pic_irq(unsigned int irq) -{ - /* Currently we do this by setting IRQ priority to 1. - If priority support is being implemented, 1 should be repalced - by a better value. */ - PNX833X_PIC_INT_REG(irq) = irq_prio[irq]; -} - -static inline void pnx833x_hard_disable_pic_irq(unsigned int irq) -{ - /* Disable IRQ by writing setting it's priority to 0 */ - PNX833X_PIC_INT_REG(irq) = 0; -} - -static int irqflags[PNX833X_PIC_NUM_IRQ]; /* initialized by zeroes */ -#define IRQFLAG_STARTED 1 -#define IRQFLAG_DISABLED 2 - -static DEFINE_RAW_SPINLOCK(pnx833x_irq_lock); - -static unsigned int pnx833x_startup_pic_irq(unsigned int irq) -{ - unsigned long flags; - unsigned int pic_irq = irq - PNX833X_PIC_IRQ_BASE; - - raw_spin_lock_irqsave(&pnx833x_irq_lock, flags); - - irqflags[pic_irq] = IRQFLAG_STARTED; /* started, not disabled */ - pnx833x_hard_enable_pic_irq(pic_irq); - - raw_spin_unlock_irqrestore(&pnx833x_irq_lock, flags); - return 0; -} - -static void pnx833x_shutdown_pic_irq(unsigned int irq) -{ - unsigned long flags; - unsigned int pic_irq = irq - PNX833X_PIC_IRQ_BASE; - - raw_spin_lock_irqsave(&pnx833x_irq_lock, flags); - - irqflags[pic_irq] = 0; /* not started */ - pnx833x_hard_disable_pic_irq(pic_irq); - - raw_spin_unlock_irqrestore(&pnx833x_irq_lock, flags); -} - -static void pnx833x_enable_pic_irq(unsigned int irq) -{ - unsigned long flags; - unsigned int pic_irq = irq - PNX833X_PIC_IRQ_BASE; - - raw_spin_lock_irqsave(&pnx833x_irq_lock, flags); - - irqflags[pic_irq] &= ~IRQFLAG_DISABLED; - if (irqflags[pic_irq] == IRQFLAG_STARTED) - pnx833x_hard_enable_pic_irq(pic_irq); - - raw_spin_unlock_irqrestore(&pnx833x_irq_lock, flags); -} - -static void pnx833x_disable_pic_irq(unsigned int irq) -{ - unsigned long flags; - unsigned int pic_irq = irq - PNX833X_PIC_IRQ_BASE; - - raw_spin_lock_irqsave(&pnx833x_irq_lock, flags); - - irqflags[pic_irq] |= IRQFLAG_DISABLED; - pnx833x_hard_disable_pic_irq(pic_irq); - - raw_spin_unlock_irqrestore(&pnx833x_irq_lock, flags); -} - -static void pnx833x_ack_pic_irq(unsigned int irq) -{ -} - -static void pnx833x_end_pic_irq(unsigned int irq) -{ -} - -static DEFINE_RAW_SPINLOCK(pnx833x_gpio_pnx833x_irq_lock); - -static unsigned int pnx833x_startup_gpio_irq(unsigned int irq) -{ - int pin = irq - PNX833X_GPIO_IRQ_BASE; - unsigned long flags; - raw_spin_lock_irqsave(&pnx833x_gpio_pnx833x_irq_lock, flags); - pnx833x_gpio_enable_irq(pin); - raw_spin_unlock_irqrestore(&pnx833x_gpio_pnx833x_irq_lock, flags); - return 0; -} - -static void pnx833x_enable_gpio_irq(unsigned int irq) -{ - int pin = irq - PNX833X_GPIO_IRQ_BASE; - unsigned long flags; - raw_spin_lock_irqsave(&pnx833x_gpio_pnx833x_irq_lock, flags); - pnx833x_gpio_enable_irq(pin); - raw_spin_unlock_irqrestore(&pnx833x_gpio_pnx833x_irq_lock, flags); -} - -static void pnx833x_disable_gpio_irq(unsigned int irq) -{ - int pin = irq - PNX833X_GPIO_IRQ_BASE; - unsigned long flags; - raw_spin_lock_irqsave(&pnx833x_gpio_pnx833x_irq_lock, flags); - pnx833x_gpio_disable_irq(pin); - raw_spin_unlock_irqrestore(&pnx833x_gpio_pnx833x_irq_lock, flags); -} - -static void pnx833x_ack_gpio_irq(unsigned int irq) -{ -} - -static void pnx833x_end_gpio_irq(unsigned int irq) -{ - int pin = irq - PNX833X_GPIO_IRQ_BASE; - unsigned long flags; - raw_spin_lock_irqsave(&pnx833x_gpio_pnx833x_irq_lock, flags); - pnx833x_gpio_clear_irq(pin); - raw_spin_unlock_irqrestore(&pnx833x_gpio_pnx833x_irq_lock, flags); -} - -static int pnx833x_set_type_gpio_irq(unsigned int irq, unsigned int flow_type) -{ - int pin = irq - PNX833X_GPIO_IRQ_BASE; - int gpio_mode; - - switch (flow_type) { - case IRQ_TYPE_EDGE_RISING: - gpio_mode = GPIO_INT_EDGE_RISING; - break; - case IRQ_TYPE_EDGE_FALLING: - gpio_mode = GPIO_INT_EDGE_FALLING; - break; - case IRQ_TYPE_EDGE_BOTH: - gpio_mode = GPIO_INT_EDGE_BOTH; - break; - case IRQ_TYPE_LEVEL_HIGH: - gpio_mode = GPIO_INT_LEVEL_HIGH; - break; - case IRQ_TYPE_LEVEL_LOW: - gpio_mode = GPIO_INT_LEVEL_LOW; - break; - default: - gpio_mode = GPIO_INT_NONE; - break; - } - - pnx833x_gpio_setup_irq(gpio_mode, pin); - - return 0; -} - -static struct irq_chip pnx833x_pic_irq_type = { - .name = "PNX-PIC", - .startup = pnx833x_startup_pic_irq, - .shutdown = pnx833x_shutdown_pic_irq, - .enable = pnx833x_enable_pic_irq, - .disable = pnx833x_disable_pic_irq, - .ack = pnx833x_ack_pic_irq, - .end = pnx833x_end_pic_irq -}; - -static struct irq_chip pnx833x_gpio_irq_type = { - .name = "PNX-GPIO", - .startup = pnx833x_startup_gpio_irq, - .shutdown = pnx833x_disable_gpio_irq, - .enable = pnx833x_enable_gpio_irq, - .disable = pnx833x_disable_gpio_irq, - .ack = pnx833x_ack_gpio_irq, - .end = pnx833x_end_gpio_irq, - .set_type = pnx833x_set_type_gpio_irq -}; - -void __init arch_init_irq(void) -{ - unsigned int irq; - - /* setup standard internal cpu irqs */ - mips_cpu_irq_init(); - - /* Set IRQ information in irq_desc */ - for (irq = PNX833X_PIC_IRQ_BASE; irq < (PNX833X_PIC_IRQ_BASE + PNX833X_PIC_NUM_IRQ); irq++) { - pnx833x_hard_disable_pic_irq(irq); - set_irq_chip_and_handler(irq, &pnx833x_pic_irq_type, handle_simple_irq); - } - - for (irq = PNX833X_GPIO_IRQ_BASE; irq < (PNX833X_GPIO_IRQ_BASE + PNX833X_GPIO_NUM_IRQ); irq++) - set_irq_chip_and_handler(irq, &pnx833x_gpio_irq_type, handle_simple_irq); - - /* Set PIC priority limiter register to 0 */ - PNX833X_PIC_INT_PRIORITY = 0; - - /* Setup GPIO IRQ dispatching */ - pnx833x_startup_pic_irq(PNX833X_PIC_GPIO_INT); - - /* Enable PIC IRQs (HWIRQ2) */ - if (cpu_has_vint) - set_vi_handler(4, pic_dispatch); - - write_c0_status(read_c0_status() | IE_IRQ2); -} - -unsigned int __cpuinit get_c0_compare_int(void) -{ - if (cpu_has_vint) - set_vi_handler(cp0_compare_irq, pnx833x_timer_dispatch); - - mips_cpu_timer_irq = MIPS_CPU_IRQ_BASE + cp0_compare_irq; - return mips_cpu_timer_irq; -} - -void __init plat_time_init(void) -{ - /* calculate mips_hpt_frequency based on PNX833X_CLOCK_CPUCP_CTL reg */ - - extern unsigned long mips_hpt_frequency; - unsigned long reg = PNX833X_CLOCK_CPUCP_CTL; - - if (!(PNX833X_BIT(reg, CLOCK_CPUCP_CTL, EXIT_RESET))) { - /* Functional clock is disabled so use crystal frequency */ - mips_hpt_frequency = 25; - } else { -#if defined(CONFIG_SOC_PNX8335) - /* Functional clock is enabled, so get clock multiplier */ - mips_hpt_frequency = 90 + (10 * PNX8335_REGFIELD(CLOCK_PLL_CPU_CTL, FREQ)); -#else - static const unsigned long int freq[4] = {240, 160, 120, 80}; - mips_hpt_frequency = freq[PNX833X_FIELD(reg, CLOCK_CPUCP_CTL, DIV_CLOCK)]; -#endif - } - - printk(KERN_INFO "CPU clock is %ld MHz\n", mips_hpt_frequency); - - mips_hpt_frequency *= 500000; -} diff --git a/arch/mips/nxp/pnx833x/common/platform.c b/arch/mips/nxp/pnx833x/common/platform.c deleted file mode 100644 index 01f8345a2069..000000000000 --- a/arch/mips/nxp/pnx833x/common/platform.c +++ /dev/null @@ -1,319 +0,0 @@ -/* - * platform.c: platform support for PNX833X. - * - * Copyright 2008 NXP Semiconductors - * Chris Steel <chris.steel@nxp.com> - * Daniel Laird <daniel.j.laird@nxp.com> - * - * Based on software written by: - * Nikita Youshchenko <yoush@debian.org>, based on PNX8550 code. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ -#include <linux/device.h> -#include <linux/dma-mapping.h> -#include <linux/platform_device.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/resource.h> -#include <linux/serial.h> -#include <linux/serial_pnx8xxx.h> -#include <linux/mtd/nand.h> -#include <linux/mtd/partitions.h> - -#ifdef CONFIG_I2C_PNX0105 -/* Until i2c driver available in kernel.*/ -#include <linux/i2c-pnx0105.h> -#endif - -#include <irq.h> -#include <irq-mapping.h> -#include <pnx833x.h> - -static u64 uart_dmamask = DMA_BIT_MASK(32); - -static struct resource pnx833x_uart_resources[] = { - [0] = { - .start = PNX833X_UART0_PORTS_START, - .end = PNX833X_UART0_PORTS_END, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = PNX833X_PIC_UART0_INT, - .end = PNX833X_PIC_UART0_INT, - .flags = IORESOURCE_IRQ, - }, - [2] = { - .start = PNX833X_UART1_PORTS_START, - .end = PNX833X_UART1_PORTS_END, - .flags = IORESOURCE_MEM, - }, - [3] = { - .start = PNX833X_PIC_UART1_INT, - .end = PNX833X_PIC_UART1_INT, - .flags = IORESOURCE_IRQ, - }, -}; - -struct pnx8xxx_port pnx8xxx_ports[] = { - [0] = { - .port = { - .type = PORT_PNX8XXX, - .iotype = UPIO_MEM, - .membase = (void __iomem *)PNX833X_UART0_PORTS_START, - .mapbase = PNX833X_UART0_PORTS_START, - .irq = PNX833X_PIC_UART0_INT, - .uartclk = 3692300, - .fifosize = 16, - .flags = UPF_BOOT_AUTOCONF, - .line = 0, - }, - }, - [1] = { - .port = { - .type = PORT_PNX8XXX, - .iotype = UPIO_MEM, - .membase = (void __iomem *)PNX833X_UART1_PORTS_START, - .mapbase = PNX833X_UART1_PORTS_START, - .irq = PNX833X_PIC_UART1_INT, - .uartclk = 3692300, - .fifosize = 16, - .flags = UPF_BOOT_AUTOCONF, - .line = 1, - }, - }, -}; - -static struct platform_device pnx833x_uart_device = { - .name = "pnx8xxx-uart", - .id = -1, - .dev = { - .dma_mask = &uart_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = pnx8xxx_ports, - }, - .num_resources = ARRAY_SIZE(pnx833x_uart_resources), - .resource = pnx833x_uart_resources, -}; - -static u64 ehci_dmamask = DMA_BIT_MASK(32); - -static struct resource pnx833x_usb_ehci_resources[] = { - [0] = { - .start = PNX833X_USB_PORTS_START, - .end = PNX833X_USB_PORTS_END, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = PNX833X_PIC_USB_INT, - .end = PNX833X_PIC_USB_INT, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device pnx833x_usb_ehci_device = { - .name = "pnx833x-ehci", - .id = -1, - .dev = { - .dma_mask = &ehci_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .num_resources = ARRAY_SIZE(pnx833x_usb_ehci_resources), - .resource = pnx833x_usb_ehci_resources, -}; - -#ifdef CONFIG_I2C_PNX0105 -static struct resource pnx833x_i2c0_resources[] = { - { - .start = PNX833X_I2C0_PORTS_START, - .end = PNX833X_I2C0_PORTS_END, - .flags = IORESOURCE_MEM, - }, - { - .start = PNX833X_PIC_I2C0_INT, - .end = PNX833X_PIC_I2C0_INT, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct resource pnx833x_i2c1_resources[] = { - { - .start = PNX833X_I2C1_PORTS_START, - .end = PNX833X_I2C1_PORTS_END, - .flags = IORESOURCE_MEM, - }, - { - .start = PNX833X_PIC_I2C1_INT, - .end = PNX833X_PIC_I2C1_INT, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct i2c_pnx0105_dev pnx833x_i2c_dev[] = { - { - .base = PNX833X_I2C0_PORTS_START, - .irq = -1, /* should be PNX833X_PIC_I2C0_INT but polling is faster */ - .clock = 6, /* 0 == 400 kHz, 4 == 100 kHz(Maximum HDMI), 6 = 50kHz(Prefered HDCP) */ - .bus_addr = 0, /* no slave support */ - }, - { - .base = PNX833X_I2C1_PORTS_START, - .irq = -1, /* on high freq, polling is faster */ - /*.irq = PNX833X_PIC_I2C1_INT,*/ - .clock = 4, /* 0 == 400 kHz, 4 == 100 kHz. 100 kHz seems a safe default for now */ - .bus_addr = 0, /* no slave support */ - }, -}; - -static struct platform_device pnx833x_i2c0_device = { - .name = "i2c-pnx0105", - .id = 0, - .dev = { - .platform_data = &pnx833x_i2c_dev[0], - }, - .num_resources = ARRAY_SIZE(pnx833x_i2c0_resources), - .resource = pnx833x_i2c0_resources, -}; - -static struct platform_device pnx833x_i2c1_device = { - .name = "i2c-pnx0105", - .id = 1, - .dev = { - .platform_data = &pnx833x_i2c_dev[1], - }, - .num_resources = ARRAY_SIZE(pnx833x_i2c1_resources), - .resource = pnx833x_i2c1_resources, -}; -#endif - -static u64 ethernet_dmamask = DMA_BIT_MASK(32); - -static struct resource pnx833x_ethernet_resources[] = { - [0] = { - .start = PNX8335_IP3902_PORTS_START, - .end = PNX8335_IP3902_PORTS_END, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = PNX8335_PIC_ETHERNET_INT, - .end = PNX8335_PIC_ETHERNET_INT, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device pnx833x_ethernet_device = { - .name = "ip3902-eth", - .id = -1, - .dev = { - .dma_mask = ðernet_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .num_resources = ARRAY_SIZE(pnx833x_ethernet_resources), - .resource = pnx833x_ethernet_resources, -}; - -static struct resource pnx833x_sata_resources[] = { - [0] = { - .start = PNX8335_SATA_PORTS_START, - .end = PNX8335_SATA_PORTS_END, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = PNX8335_PIC_SATA_INT, - .end = PNX8335_PIC_SATA_INT, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device pnx833x_sata_device = { - .name = "pnx833x-sata", - .id = -1, - .num_resources = ARRAY_SIZE(pnx833x_sata_resources), - .resource = pnx833x_sata_resources, -}; - -static const char *part_probes[] = { - "cmdlinepart", - NULL -}; - -static void -pnx833x_flash_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl) -{ - struct nand_chip *this = mtd->priv; - unsigned long nandaddr = (unsigned long)this->IO_ADDR_W; - - if (cmd == NAND_CMD_NONE) - return; - - if (ctrl & NAND_CLE) - writeb(cmd, (void __iomem *)(nandaddr + PNX8335_NAND_CLE_MASK)); - else - writeb(cmd, (void __iomem *)(nandaddr + PNX8335_NAND_ALE_MASK)); -} - -static struct platform_nand_data pnx833x_flash_nand_data = { - .chip = { - .chip_delay = 25, - .part_probe_types = part_probes, - }, - .ctrl = { - .cmd_ctrl = pnx833x_flash_nand_cmd_ctrl - } -}; - -/* - * Set start to be the correct address (PNX8335_NAND_BASE with no 0xb!!), - * 12 bytes more seems to be the standard that allows for NAND access. - */ -static struct resource pnx833x_flash_nand_resource = { - .start = PNX8335_NAND_BASE, - .end = PNX8335_NAND_BASE + 12, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device pnx833x_flash_nand = { - .name = "gen_nand", - .id = -1, - .num_resources = 1, - .resource = &pnx833x_flash_nand_resource, - .dev = { - .platform_data = &pnx833x_flash_nand_data, - }, -}; - -static struct platform_device *pnx833x_platform_devices[] __initdata = { - &pnx833x_uart_device, - &pnx833x_usb_ehci_device, -#ifdef CONFIG_I2C_PNX0105 - &pnx833x_i2c0_device, - &pnx833x_i2c1_device, -#endif - &pnx833x_ethernet_device, - &pnx833x_sata_device, - &pnx833x_flash_nand, -}; - -static int __init pnx833x_platform_init(void) -{ - int res; - - res = platform_add_devices(pnx833x_platform_devices, - ARRAY_SIZE(pnx833x_platform_devices)); - - return res; -} - -arch_initcall(pnx833x_platform_init); diff --git a/arch/mips/nxp/pnx833x/common/prom.c b/arch/mips/nxp/pnx833x/common/prom.c deleted file mode 100644 index 29969f90a6b0..000000000000 --- a/arch/mips/nxp/pnx833x/common/prom.c +++ /dev/null @@ -1,64 +0,0 @@ -/* - * prom.c: - * - * Copyright 2008 NXP Semiconductors - * Chris Steel <chris.steel@nxp.com> - * Daniel Laird <daniel.j.laird@nxp.com> - * - * Based on software written by: - * Nikita Youshchenko <yoush@debian.org>, based on PNX8550 code. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ -#include <linux/init.h> -#include <asm/bootinfo.h> -#include <linux/string.h> - -void __init prom_init_cmdline(void) -{ - int argc = fw_arg0; - char **argv = (char **)fw_arg1; - char *c = &(arcs_cmdline[0]); - int i; - - for (i = 1; i < argc; i++) { - strcpy(c, argv[i]); - c += strlen(argv[i]); - if (i < argc-1) - *c++ = ' '; - } - *c = 0; -} - -char __init *prom_getenv(char *envname) -{ - extern char **prom_envp; - char **env = prom_envp; - int i; - - i = strlen(envname); - - while (*env) { - if (strncmp(envname, *env, i) == 0 && *(*env+i) == '=') - return *env + i + 1; - env++; - } - - return 0; -} - -void __init prom_free_prom_memory(void) -{ -} diff --git a/arch/mips/nxp/pnx833x/common/reset.c b/arch/mips/nxp/pnx833x/common/reset.c deleted file mode 100644 index e0ea96d29fde..000000000000 --- a/arch/mips/nxp/pnx833x/common/reset.c +++ /dev/null @@ -1,44 +0,0 @@ -/* - * reset.c: reset support for PNX833X. - * - * Copyright 2008 NXP Semiconductors - * Chris Steel <chris.steel@nxp.com> - * Daniel Laird <daniel.j.laird@nxp.com> - * - * Based on software written by: - * Nikita Youshchenko <yoush@debian.org>, based on PNX8550 code. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ -#include <linux/reboot.h> -#include <pnx833x.h> - -void pnx833x_machine_restart(char *command) -{ - PNX833X_RESET_CONTROL_2 = 0; - PNX833X_RESET_CONTROL = 0; -} - -void pnx833x_machine_halt(void) -{ - while (1) - __asm__ __volatile__ ("wait"); - -} - -void pnx833x_machine_power_off(void) -{ - pnx833x_machine_halt(); -} diff --git a/arch/mips/nxp/pnx833x/common/setup.c b/arch/mips/nxp/pnx833x/common/setup.c deleted file mode 100644 index e51fbc4b644d..000000000000 --- a/arch/mips/nxp/pnx833x/common/setup.c +++ /dev/null @@ -1,64 +0,0 @@ -/* - * setup.c: Setup PNX833X Soc. - * - * Copyright 2008 NXP Semiconductors - * Chris Steel <chris.steel@nxp.com> - * Daniel Laird <daniel.j.laird@nxp.com> - * - * Based on software written by: - * Nikita Youshchenko <yoush@debian.org>, based on PNX8550 code. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/io.h> -#include <linux/pci.h> -#include <asm/reboot.h> -#include <pnx833x.h> -#include <gpio.h> - -extern void pnx833x_board_setup(void); -extern void pnx833x_machine_restart(char *); -extern void pnx833x_machine_halt(void); -extern void pnx833x_machine_power_off(void); - -int __init plat_mem_setup(void) -{ - /* fake pci bus to avoid bounce buffers */ - PCI_DMA_BUS_IS_PHYS = 1; - - /* set mips clock to 320MHz */ -#if defined(CONFIG_SOC_PNX8335) - PNX8335_WRITEFIELD(0x17, CLOCK_PLL_CPU_CTL, FREQ); -#endif - pnx833x_gpio_init(); /* so it will be ready in board_setup() */ - - pnx833x_board_setup(); - - _machine_restart = pnx833x_machine_restart; - _machine_halt = pnx833x_machine_halt; - pm_power_off = pnx833x_machine_power_off; - - /* IO/MEM resources. */ - set_io_port_base(KSEG1); - ioport_resource.start = 0; - ioport_resource.end = ~0; - iomem_resource.start = 0; - iomem_resource.end = ~0; - - return 0; -} diff --git a/arch/mips/nxp/pnx833x/stb22x/Makefile b/arch/mips/nxp/pnx833x/stb22x/Makefile deleted file mode 100644 index f81c5801f455..000000000000 --- a/arch/mips/nxp/pnx833x/stb22x/Makefile +++ /dev/null @@ -1,3 +0,0 @@ -lib-y := board.o - -EXTRA_CFLAGS += -Werror diff --git a/arch/mips/nxp/pnx833x/stb22x/board.c b/arch/mips/nxp/pnx833x/stb22x/board.c deleted file mode 100644 index 644eb7c3210f..000000000000 --- a/arch/mips/nxp/pnx833x/stb22x/board.c +++ /dev/null @@ -1,133 +0,0 @@ -/* - * board.c: STB225 board support. - * - * Copyright 2008 NXP Semiconductors - * Chris Steel <chris.steel@nxp.com> - * Daniel Laird <daniel.j.laird@nxp.com> - * - * Based on software written by: - * Nikita Youshchenko <yoush@debian.org>, based on PNX8550 code. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ -#include <linux/init.h> -#include <asm/bootinfo.h> -#include <linux/mm.h> -#include <pnx833x.h> -#include <gpio.h> - -/* endianess twiddlers */ -#define PNX8335_DEBUG0 0x4400 -#define PNX8335_DEBUG1 0x4404 -#define PNX8335_DEBUG2 0x4408 -#define PNX8335_DEBUG3 0x440c -#define PNX8335_DEBUG4 0x4410 -#define PNX8335_DEBUG5 0x4414 -#define PNX8335_DEBUG6 0x4418 -#define PNX8335_DEBUG7 0x441c - -int prom_argc; -char **prom_argv, **prom_envp; - -extern void prom_init_cmdline(void); -extern char *prom_getenv(char *envname); - -const char *get_system_type(void) -{ - return "NXP STB22x"; -} - -static inline unsigned long env_or_default(char *env, unsigned long dfl) -{ - char *str = prom_getenv(env); - return str ? simple_strtol(str, 0, 0) : dfl; -} - -void __init prom_init(void) -{ - unsigned long memsize; - - prom_argc = fw_arg0; - prom_argv = (char **)fw_arg1; - prom_envp = (char **)fw_arg2; - - prom_init_cmdline(); - - memsize = env_or_default("memsize", 0x02000000); - add_memory_region(0, memsize, BOOT_MEM_RAM); -} - -void __init pnx833x_board_setup(void) -{ - pnx833x_gpio_select_function_alt(4); - pnx833x_gpio_select_output(4); - pnx833x_gpio_select_function_alt(5); - pnx833x_gpio_select_input(5); - pnx833x_gpio_select_function_alt(6); - pnx833x_gpio_select_input(6); - pnx833x_gpio_select_function_alt(7); - pnx833x_gpio_select_output(7); - - pnx833x_gpio_select_function_alt(25); - pnx833x_gpio_select_function_alt(26); - - pnx833x_gpio_select_function_alt(27); - pnx833x_gpio_select_function_alt(28); - pnx833x_gpio_select_function_alt(29); - pnx833x_gpio_select_function_alt(30); - pnx833x_gpio_select_function_alt(31); - pnx833x_gpio_select_function_alt(32); - pnx833x_gpio_select_function_alt(33); - -#if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE) - /* Setup MIU for NAND access on CS0... - * - * (it seems that we must also configure CS1 for reliable operation, - * otherwise the first read ID command will fail if it's read as 4 bytes - * but pass if it's read as 1 word.) - */ - - /* Setup MIU CS0 & CS1 timing */ - PNX833X_MIU_SEL0 = 0; - PNX833X_MIU_SEL1 = 0; - PNX833X_MIU_SEL0_TIMING = 0x50003081; - PNX833X_MIU_SEL1_TIMING = 0x50003081; - - /* Setup GPIO 00 for use as MIU CS1 (CS0 is not multiplexed, so does not need this) */ - pnx833x_gpio_select_function_alt(0); - - /* Setup GPIO 04 to input NAND read/busy signal */ - pnx833x_gpio_select_function_io(4); - pnx833x_gpio_select_input(4); - - /* Setup GPIO 05 to disable NAND write protect */ - pnx833x_gpio_select_function_io(5); - pnx833x_gpio_select_output(5); - pnx833x_gpio_write(1, 5); - -#elif defined(CONFIG_MTD_CFI) || defined(CONFIG_MTD_CFI_MODULE) - - /* Set up MIU for 16-bit NOR access on CS0 and CS1... */ - - /* Setup MIU CS0 & CS1 timing */ - PNX833X_MIU_SEL0 = 1; - PNX833X_MIU_SEL1 = 1; - PNX833X_MIU_SEL0_TIMING = 0x6A08D082; - PNX833X_MIU_SEL1_TIMING = 0x6A08D082; - - /* Setup GPIO 00 for use as MIU CS1 (CS0 is not multiplexed, so does not need this) */ - pnx833x_gpio_select_function_alt(0); -#endif -} diff --git a/arch/mips/nxp/pnx8550/common/Makefile b/arch/mips/nxp/pnx8550/common/Makefile deleted file mode 100644 index dd9e7b1f7fd3..000000000000 --- a/arch/mips/nxp/pnx8550/common/Makefile +++ /dev/null @@ -1,28 +0,0 @@ -# -# Per Hallsmark, per.hallsmark@mvista.com -# -# ######################################################################## -# -# This program is free software; you can distribute it and/or modify it -# under the terms of the GNU General Public License (Version 2) as -# published by the Free Software Foundation. -# -# This program is distributed in the hope it will be useful, but WITHOUT -# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -# for more details. -# -# You should have received a copy of the GNU General Public License along -# with this program; if not, write to the Free Software Foundation, Inc., -# 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -# -# ####################################################################### -# -# Makefile for the PNX8550 specific kernel interface routines -# under Linux. -# - -obj-y := setup.o prom.o int.o reset.o time.o proc.o platform.o -obj-$(CONFIG_PCI) += pci.o - -EXTRA_CFLAGS += -Werror diff --git a/arch/mips/nxp/pnx8550/common/int.c b/arch/mips/nxp/pnx8550/common/int.c deleted file mode 100644 index cfed5051dc6d..000000000000 --- a/arch/mips/nxp/pnx8550/common/int.c +++ /dev/null @@ -1,236 +0,0 @@ -/* - * - * Copyright (C) 2005 Embedded Alley Solutions, Inc - * Ported to 2.6. - * - * Per Hallsmark, per.hallsmark@mvista.com - * Copyright (C) 2000, 2001 MIPS Technologies, Inc. - * Copyright (C) 2001 Ralf Baechle - * - * Cleaned up and bug fixing: Pete Popov, ppopov@embeddedalley.com - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - */ -#include <linux/compiler.h> -#include <linux/init.h> -#include <linux/irq.h> -#include <linux/sched.h> -#include <linux/interrupt.h> -#include <linux/kernel_stat.h> -#include <linux/random.h> -#include <linux/module.h> - -#include <asm/io.h> -#include <int.h> -#include <uart.h> - -/* default prio for interrupts */ -/* first one is a no-no so therefore always prio 0 (disabled) */ -static char gic_prio[PNX8550_INT_GIC_TOTINT] = { - 0, 1, 1, 1, 1, 15, 1, 1, 1, 1, // 0 - 9 - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, // 10 - 19 - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, // 20 - 29 - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, // 30 - 39 - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, // 40 - 49 - 1, 1, 1, 1, 1, 1, 1, 1, 2, 1, // 50 - 59 - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, // 60 - 69 - 1 // 70 -}; - -static void hw0_irqdispatch(int irq) -{ - /* find out which interrupt */ - irq = PNX8550_GIC_VECTOR_0 >> 3; - - if (irq == 0) { - printk("hw0_irqdispatch: irq 0, spurious interrupt?\n"); - return; - } - do_IRQ(PNX8550_INT_GIC_MIN + irq); -} - - -static void timer_irqdispatch(int irq) -{ - irq = (0x01c0 & read_c0_config7()) >> 6; - - if (unlikely(irq == 0)) { - printk("timer_irqdispatch: irq 0, spurious interrupt?\n"); - return; - } - - if (irq & 0x1) - do_IRQ(PNX8550_INT_TIMER1); - if (irq & 0x2) - do_IRQ(PNX8550_INT_TIMER2); - if (irq & 0x4) - do_IRQ(PNX8550_INT_TIMER3); -} - -asmlinkage void plat_irq_dispatch(void) -{ - unsigned int pending = read_c0_status() & read_c0_cause() & ST0_IM; - - if (pending & STATUSF_IP2) - hw0_irqdispatch(2); - else if (pending & STATUSF_IP7) { - if (read_c0_config7() & 0x01c0) - timer_irqdispatch(7); - } else - spurious_interrupt(); -} - -static inline void modify_cp0_intmask(unsigned clr_mask, unsigned set_mask) -{ - unsigned long status = read_c0_status(); - - status &= ~((clr_mask & 0xFF) << 8); - status |= (set_mask & 0xFF) << 8; - - write_c0_status(status); -} - -static inline void mask_gic_int(unsigned int irq_nr) -{ - /* interrupt disabled, bit 26(WE_ENABLE)=1 and bit 16(enable)=0 */ - PNX8550_GIC_REQ(irq_nr) = 1<<28; /* set priority to 0 */ -} - -static inline void unmask_gic_int(unsigned int irq_nr) -{ - /* set prio mask to lower four bits and enable interrupt */ - PNX8550_GIC_REQ(irq_nr) = (1<<26 | 1<<16) | (1<<28) | gic_prio[irq_nr]; -} - -static inline void mask_irq(unsigned int irq_nr) -{ - if ((PNX8550_INT_CP0_MIN <= irq_nr) && (irq_nr <= PNX8550_INT_CP0_MAX)) { - modify_cp0_intmask(1 << irq_nr, 0); - } else if ((PNX8550_INT_GIC_MIN <= irq_nr) && - (irq_nr <= PNX8550_INT_GIC_MAX)) { - mask_gic_int(irq_nr - PNX8550_INT_GIC_MIN); - } else if ((PNX8550_INT_TIMER_MIN <= irq_nr) && - (irq_nr <= PNX8550_INT_TIMER_MAX)) { - modify_cp0_intmask(1 << 7, 0); - } else { - printk("mask_irq: irq %d doesn't exist!\n", irq_nr); - } -} - -static inline void unmask_irq(unsigned int irq_nr) -{ - if ((PNX8550_INT_CP0_MIN <= irq_nr) && (irq_nr <= PNX8550_INT_CP0_MAX)) { - modify_cp0_intmask(0, 1 << irq_nr); - } else if ((PNX8550_INT_GIC_MIN <= irq_nr) && - (irq_nr <= PNX8550_INT_GIC_MAX)) { - unmask_gic_int(irq_nr - PNX8550_INT_GIC_MIN); - } else if ((PNX8550_INT_TIMER_MIN <= irq_nr) && - (irq_nr <= PNX8550_INT_TIMER_MAX)) { - modify_cp0_intmask(0, 1 << 7); - } else { - printk("mask_irq: irq %d doesn't exist!\n", irq_nr); - } -} - -int pnx8550_set_gic_priority(int irq, int priority) -{ - int gic_irq = irq-PNX8550_INT_GIC_MIN; - int prev_priority = PNX8550_GIC_REQ(gic_irq) & 0xf; - - gic_prio[gic_irq] = priority; - PNX8550_GIC_REQ(gic_irq) |= (0x10000000 | gic_prio[gic_irq]); - - return prev_priority; -} - -static struct irq_chip level_irq_type = { - .name = "PNX Level IRQ", - .ack = mask_irq, - .mask = mask_irq, - .mask_ack = mask_irq, - .unmask = unmask_irq, -}; - -static struct irqaction gic_action = { - .handler = no_action, - .flags = IRQF_DISABLED, - .name = "GIC", -}; - -static struct irqaction timer_action = { - .handler = no_action, - .flags = IRQF_DISABLED | IRQF_TIMER, - .name = "Timer", -}; - -void __init arch_init_irq(void) -{ - int i; - int configPR; - - for (i = 0; i < PNX8550_INT_CP0_TOTINT; i++) { - set_irq_chip_and_handler(i, &level_irq_type, handle_level_irq); - mask_irq(i); /* mask the irq just in case */ - } - - /* init of GIC/IPC interrupts */ - /* should be done before cp0 since cp0 init enables the GIC int */ - for (i = PNX8550_INT_GIC_MIN; i <= PNX8550_INT_GIC_MAX; i++) { - int gic_int_line = i - PNX8550_INT_GIC_MIN; - if (gic_int_line == 0 ) - continue; // don't fiddle with int 0 - /* - * enable change of TARGET, ENABLE and ACTIVE_LOW bits - * set TARGET 0 to route through hw0 interrupt - * set ACTIVE_LOW 0 active high (correct?) - * - * We really should setup an interrupt description table - * to do this nicely. - * Note, PCI INTA is active low on the bus, but inverted - * in the GIC, so to us it's active high. - */ - PNX8550_GIC_REQ(i - PNX8550_INT_GIC_MIN) = 0x1E000000; - - /* mask/priority is still 0 so we will not get any - * interrupts until it is unmasked */ - - set_irq_chip_and_handler(i, &level_irq_type, handle_level_irq); - } - - /* Priority level 0 */ - PNX8550_GIC_PRIMASK_0 = PNX8550_GIC_PRIMASK_1 = 0; - - /* Set int vector table address */ - PNX8550_GIC_VECTOR_0 = PNX8550_GIC_VECTOR_1 = 0; - - set_irq_chip_and_handler(MIPS_CPU_GIC_IRQ, &level_irq_type, - handle_level_irq); - setup_irq(MIPS_CPU_GIC_IRQ, &gic_action); - - /* init of Timer interrupts */ - for (i = PNX8550_INT_TIMER_MIN; i <= PNX8550_INT_TIMER_MAX; i++) - set_irq_chip_and_handler(i, &level_irq_type, handle_level_irq); - - /* Stop Timer 1-3 */ - configPR = read_c0_config7(); - configPR |= 0x00000038; - write_c0_config7(configPR); - - set_irq_chip_and_handler(MIPS_CPU_TIMER_IRQ, &level_irq_type, - handle_level_irq); - setup_irq(MIPS_CPU_TIMER_IRQ, &timer_action); -} - -EXPORT_SYMBOL(pnx8550_set_gic_priority); diff --git a/arch/mips/nxp/pnx8550/common/pci.c b/arch/mips/nxp/pnx8550/common/pci.c index eee4f3dfc410..98e86ddb86cc 100644 --- a/arch/mips/nxp/pnx8550/common/pci.c +++ b/arch/mips/nxp/pnx8550/common/pci.c @@ -44,6 +44,7 @@ extern struct pci_ops pnx8550_pci_ops; static struct pci_controller pnx8550_controller = { .pci_ops = &pnx8550_pci_ops, + .io_map_base = PNX8550_PORT_BASE, .io_resource = &pci_io_resource, .mem_resource = &pci_mem_resource, }; diff --git a/arch/mips/nxp/pnx8550/common/platform.c b/arch/mips/nxp/pnx8550/common/platform.c deleted file mode 100644 index 5264cc09a27b..000000000000 --- a/arch/mips/nxp/pnx8550/common/platform.c +++ /dev/null @@ -1,133 +0,0 @@ -/* - * Platform device support for NXP PNX8550 SoCs - * - * Copyright 2005, Embedded Alley Solutions, Inc - * - * Based on arch/mips/au1000/common/platform.c - * Platform device support for Au1x00 SoCs. - * - * Copyright 2004, Matt Porter <mporter@kernel.crashing.org> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ -#include <linux/device.h> -#include <linux/dma-mapping.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/resource.h> -#include <linux/serial.h> -#include <linux/serial_pnx8xxx.h> -#include <linux/platform_device.h> - -#include <int.h> -#include <usb.h> -#include <uart.h> - -static struct resource pnx8550_usb_ohci_resources[] = { - [0] = { - .start = PNX8550_USB_OHCI_OP_BASE, - .end = PNX8550_USB_OHCI_OP_BASE + - PNX8550_USB_OHCI_OP_LEN, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = PNX8550_INT_USB, - .end = PNX8550_INT_USB, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct resource pnx8550_uart_resources[] = { - [0] = { - .start = PNX8550_UART_PORT0, - .end = PNX8550_UART_PORT0 + 0xfff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = PNX8550_UART_INT(0), - .end = PNX8550_UART_INT(0), - .flags = IORESOURCE_IRQ, - }, - [2] = { - .start = PNX8550_UART_PORT1, - .end = PNX8550_UART_PORT1 + 0xfff, - .flags = IORESOURCE_MEM, - }, - [3] = { - .start = PNX8550_UART_INT(1), - .end = PNX8550_UART_INT(1), - .flags = IORESOURCE_IRQ, - }, -}; - -struct pnx8xxx_port pnx8xxx_ports[] = { - [0] = { - .port = { - .type = PORT_PNX8XXX, - .iotype = UPIO_MEM, - .membase = (void __iomem *)PNX8550_UART_PORT0, - .mapbase = PNX8550_UART_PORT0, - .irq = PNX8550_UART_INT(0), - .uartclk = 3692300, - .fifosize = 16, - .flags = UPF_BOOT_AUTOCONF, - .line = 0, - }, - }, - [1] = { - .port = { - .type = PORT_PNX8XXX, - .iotype = UPIO_MEM, - .membase = (void __iomem *)PNX8550_UART_PORT1, - .mapbase = PNX8550_UART_PORT1, - .irq = PNX8550_UART_INT(1), - .uartclk = 3692300, - .fifosize = 16, - .flags = UPF_BOOT_AUTOCONF, - .line = 1, - }, - }, -}; - -/* The dmamask must be set for OHCI to work */ -static u64 ohci_dmamask = DMA_BIT_MASK(32); - -static u64 uart_dmamask = DMA_BIT_MASK(32); - -static struct platform_device pnx8550_usb_ohci_device = { - .name = "pnx8550-ohci", - .id = -1, - .dev = { - .dma_mask = &ohci_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .num_resources = ARRAY_SIZE(pnx8550_usb_ohci_resources), - .resource = pnx8550_usb_ohci_resources, -}; - -static struct platform_device pnx8550_uart_device = { - .name = "pnx8xxx-uart", - .id = -1, - .dev = { - .dma_mask = &uart_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = pnx8xxx_ports, - }, - .num_resources = ARRAY_SIZE(pnx8550_uart_resources), - .resource = pnx8550_uart_resources, -}; - -static struct platform_device *pnx8550_platform_devices[] __initdata = { - &pnx8550_usb_ohci_device, - &pnx8550_uart_device, -}; - -static int __init pnx8550_platform_init(void) -{ - return platform_add_devices(pnx8550_platform_devices, - ARRAY_SIZE(pnx8550_platform_devices)); -} - -arch_initcall(pnx8550_platform_init); diff --git a/arch/mips/nxp/pnx8550/common/proc.c b/arch/mips/nxp/pnx8550/common/proc.c deleted file mode 100644 index 3bba5ec828e8..000000000000 --- a/arch/mips/nxp/pnx8550/common/proc.c +++ /dev/null @@ -1,110 +0,0 @@ -/* - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - */ -#include <linux/init.h> -#include <linux/proc_fs.h> -#include <linux/irq.h> -#include <linux/sched.h> -#include <linux/interrupt.h> -#include <linux/kernel_stat.h> -#include <linux/random.h> - -#include <asm/io.h> -#include <int.h> -#include <uart.h> - - -static int pnx8550_timers_read(char* page, char** start, off_t offset, int count, int* eof, void* data) -{ - int len = 0; - int configPR = read_c0_config7(); - - if (offset==0) { - len += sprintf(&page[len], "Timer: count, compare, tc, status\n"); - len += sprintf(&page[len], " 1: %11i, %8i, %1i, %s\n", - read_c0_count(), read_c0_compare(), - (configPR>>6)&0x1, ((configPR>>3)&0x1)? "off":"on"); - len += sprintf(&page[len], " 2: %11i, %8i, %1i, %s\n", - read_c0_count2(), read_c0_compare2(), - (configPR>>7)&0x1, ((configPR>>4)&0x1)? "off":"on"); - len += sprintf(&page[len], " 3: %11i, %8i, %1i, %s\n", - read_c0_count3(), read_c0_compare3(), - (configPR>>8)&0x1, ((configPR>>5)&0x1)? "off":"on"); - } - - return len; -} - -static int pnx8550_registers_read(char* page, char** start, off_t offset, int count, int* eof, void* data) -{ - int len = 0; - - if (offset==0) { - len += sprintf(&page[len], "config1: %#10.8x\n", read_c0_config1()); - len += sprintf(&page[len], "config2: %#10.8x\n", read_c0_config2()); - len += sprintf(&page[len], "config3: %#10.8x\n", read_c0_config3()); - len += sprintf(&page[len], "configPR: %#10.8x\n", read_c0_config7()); - len += sprintf(&page[len], "status: %#10.8x\n", read_c0_status()); - len += sprintf(&page[len], "cause: %#10.8x\n", read_c0_cause()); - len += sprintf(&page[len], "count: %#10.8x\n", read_c0_count()); - len += sprintf(&page[len], "count_2: %#10.8x\n", read_c0_count2()); - len += sprintf(&page[len], "count_3: %#10.8x\n", read_c0_count3()); - len += sprintf(&page[len], "compare: %#10.8x\n", read_c0_compare()); - len += sprintf(&page[len], "compare_2: %#10.8x\n", read_c0_compare2()); - len += sprintf(&page[len], "compare_3: %#10.8x\n", read_c0_compare3()); - } - - return len; -} - -static struct proc_dir_entry* pnx8550_dir; -static struct proc_dir_entry* pnx8550_timers; -static struct proc_dir_entry* pnx8550_registers; - -static int pnx8550_proc_init( void ) -{ - - // Create /proc/pnx8550 - pnx8550_dir = proc_mkdir("pnx8550", NULL); - if (!pnx8550_dir) { - printk(KERN_ERR "Can't create pnx8550 proc dir\n"); - return -1; - } - - // Create /proc/pnx8550/timers - pnx8550_timers = create_proc_read_entry( - "timers", - 0, - pnx8550_dir, - pnx8550_timers_read, - NULL); - - if (!pnx8550_timers) - printk(KERN_ERR "Can't create pnx8550 timers proc file\n"); - - // Create /proc/pnx8550/registers - pnx8550_registers = create_proc_read_entry( - "registers", - 0, - pnx8550_dir, - pnx8550_registers_read, - NULL); - - if (!pnx8550_registers) - printk(KERN_ERR "Can't create pnx8550 registers proc file\n"); - - return 0; -} - -__initcall(pnx8550_proc_init); diff --git a/arch/mips/nxp/pnx8550/common/prom.c b/arch/mips/nxp/pnx8550/common/prom.c deleted file mode 100644 index 32f70097c3c7..000000000000 --- a/arch/mips/nxp/pnx8550/common/prom.c +++ /dev/null @@ -1,128 +0,0 @@ -/* - * - * Per Hallsmark, per.hallsmark@mvista.com - * - * Based on jmr3927/common/prom.c - * - * 2004 (c) MontaVista Software, Inc. This file is licensed under the - * terms of the GNU General Public License version 2. This program is - * licensed "as is" without any warranty of any kind, whether express - * or implied. - */ -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/string.h> -#include <linux/serial_pnx8xxx.h> - -#include <asm/bootinfo.h> -#include <uart.h> - -/* #define DEBUG_CMDLINE */ - -extern int prom_argc; -extern char **prom_argv, **prom_envp; - -typedef struct -{ - char *name; -/* char *val; */ -}t_env_var; - - -char * prom_getcmdline(void) -{ - return &(arcs_cmdline[0]); -} - -void __init prom_init_cmdline(void) -{ - int i; - - arcs_cmdline[0] = '\0'; - for (i = 0; i < prom_argc; i++) { - strcat(arcs_cmdline, prom_argv[i]); - strcat(arcs_cmdline, " "); - } -} - -char *prom_getenv(char *envname) -{ - /* - * Return a pointer to the given environment variable. - * Environment variables are stored in the form of "memsize=64". - */ - - t_env_var *env = (t_env_var *)prom_envp; - int i; - - i = strlen(envname); - - while(env->name) { - if(strncmp(envname, env->name, i) == 0) { - return(env->name + strlen(envname) + 1); - } - env++; - } - return(NULL); -} - -inline unsigned char str2hexnum(unsigned char c) -{ - if(c >= '0' && c <= '9') - return c - '0'; - if(c >= 'a' && c <= 'f') - return c - 'a' + 10; - if(c >= 'A' && c <= 'F') - return c - 'A' + 10; - return 0; /* foo */ -} - -inline void str2eaddr(unsigned char *ea, unsigned char *str) -{ - int i; - - for(i = 0; i < 6; i++) { - unsigned char num; - - if((*str == '.') || (*str == ':')) - str++; - num = str2hexnum(*str++) << 4; - num |= (str2hexnum(*str++)); - ea[i] = num; - } -} - -int get_ethernet_addr(char *ethernet_addr) -{ - char *ethaddr_str; - - ethaddr_str = prom_getenv("ethaddr"); - if (!ethaddr_str) { - printk("ethaddr not set in boot prom\n"); - return -1; - } - str2eaddr(ethernet_addr, ethaddr_str); - return 0; -} - -void __init prom_free_prom_memory(void) -{ -} - -extern int pnx8550_console_port; - -/* used by early printk */ -void prom_putchar(char c) -{ - if (pnx8550_console_port != -1) { - /* Wait until FIFO not full */ - while( ((ip3106_fifo(UART_BASE, pnx8550_console_port) & PNX8XXX_UART_FIFO_TXFIFO) >> 16) >= 16) - ; - /* Send one char */ - ip3106_fifo(UART_BASE, pnx8550_console_port) = c; - } -} - -EXPORT_SYMBOL(get_ethernet_addr); -EXPORT_SYMBOL(str2eaddr); diff --git a/arch/mips/nxp/pnx8550/common/reset.c b/arch/mips/nxp/pnx8550/common/reset.c deleted file mode 100644 index fadd8744a6bc..000000000000 --- a/arch/mips/nxp/pnx8550/common/reset.c +++ /dev/null @@ -1,50 +0,0 @@ -/*. - * - * ######################################################################## - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * ######################################################################## - * - * Reset the PNX8550 board. - * - */ -#include <linux/kernel.h> - -#include <asm/reboot.h> -#include <glb.h> - -void pnx8550_machine_restart(char *command) -{ - char head[] = "************* Machine restart *************"; - char foot[] = "*******************************************"; - - printk("\n\n"); - printk("%s\n", head); - if (command != NULL) - printk("* %s\n", command); - printk("%s\n", foot); - - PNX8550_RST_CTL = PNX8550_RST_DO_SW_RST; -} - -void pnx8550_machine_halt(void) -{ - printk("*** Machine halt. (Not implemented) ***\n"); -} - -void pnx8550_machine_power_off(void) -{ - printk("*** Machine power off. (Not implemented) ***\n"); -} diff --git a/arch/mips/nxp/pnx8550/common/setup.c b/arch/mips/nxp/pnx8550/common/setup.c index 2aed50fef10f..64246c9c875c 100644 --- a/arch/mips/nxp/pnx8550/common/setup.c +++ b/arch/mips/nxp/pnx8550/common/setup.c @@ -113,7 +113,7 @@ void __init plat_mem_setup(void) PNX8550_GLB2_ENAB_INTA_O = 0; /* IO/MEM resources. */ - set_io_port_base(KSEG1); + set_io_port_base(PNX8550_PORT_BASE); ioport_resource.start = 0; ioport_resource.end = ~0; iomem_resource.start = 0; diff --git a/arch/mips/nxp/pnx8550/common/time.c b/arch/mips/nxp/pnx8550/common/time.c deleted file mode 100644 index 8836c6203df0..000000000000 --- a/arch/mips/nxp/pnx8550/common/time.c +++ /dev/null @@ -1,151 +0,0 @@ -/* - * Copyright 2001, 2002, 2003 MontaVista Software Inc. - * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net - * Copyright (C) 2007 Ralf Baechle (ralf@linux-mips.org) - * - * Common time service routines for MIPS machines. See - * Documents/MIPS/README.txt. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ -#include <linux/types.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/sched.h> -#include <linux/param.h> -#include <linux/time.h> -#include <linux/timer.h> -#include <linux/smp.h> -#include <linux/kernel_stat.h> -#include <linux/spinlock.h> -#include <linux/interrupt.h> - -#include <asm/bootinfo.h> -#include <asm/cpu.h> -#include <asm/time.h> -#include <asm/hardirq.h> -#include <asm/div64.h> -#include <asm/debug.h> - -#include <int.h> -#include <cm.h> - -static unsigned long cpj; - -static cycle_t hpt_read(struct clocksource *cs) -{ - return read_c0_count2(); -} - -static struct clocksource pnx_clocksource = { - .name = "pnx8xxx", - .rating = 200, - .read = hpt_read, - .flags = CLOCK_SOURCE_IS_CONTINUOUS, -}; - -static irqreturn_t pnx8xxx_timer_interrupt(int irq, void *dev_id) -{ - struct clock_event_device *c = dev_id; - - /* clear MATCH, signal the event */ - c->event_handler(c); - - return IRQ_HANDLED; -} - -static struct irqaction pnx8xxx_timer_irq = { - .handler = pnx8xxx_timer_interrupt, - .flags = IRQF_DISABLED | IRQF_PERCPU | IRQF_TIMER, - .name = "pnx8xxx_timer", -}; - -static irqreturn_t monotonic_interrupt(int irq, void *dev_id) -{ - /* Timer 2 clear interrupt */ - write_c0_compare2(-1); - return IRQ_HANDLED; -} - -static struct irqaction monotonic_irqaction = { - .handler = monotonic_interrupt, - .flags = IRQF_DISABLED | IRQF_TIMER, - .name = "Monotonic timer", -}; - -static int pnx8xxx_set_next_event(unsigned long delta, - struct clock_event_device *evt) -{ - write_c0_compare(delta); - return 0; -} - -static struct clock_event_device pnx8xxx_clockevent = { - .name = "pnx8xxx_clockevent", - .features = CLOCK_EVT_FEAT_ONESHOT, - .set_next_event = pnx8xxx_set_next_event, -}; - -static inline void timer_ack(void) -{ - write_c0_compare(cpj); -} - -__init void plat_time_init(void) -{ - unsigned int configPR; - unsigned int n; - unsigned int m; - unsigned int p; - unsigned int pow2p; - - pnx8xxx_clockevent.cpumask = cpu_none_mask; - clockevents_register_device(&pnx8xxx_clockevent); - clocksource_register(&pnx_clocksource); - - /* Timer 1 start */ - configPR = read_c0_config7(); - configPR &= ~0x00000008; - write_c0_config7(configPR); - - /* Timer 2 start */ - configPR = read_c0_config7(); - configPR &= ~0x00000010; - write_c0_config7(configPR); - - /* Timer 3 stop */ - configPR = read_c0_config7(); - configPR |= 0x00000020; - write_c0_config7(configPR); - - - /* PLL0 sets MIPS clock (PLL1 <=> TM1, PLL6 <=> TM2, PLL5 <=> mem) */ - /* (but only if CLK_MIPS_CTL select value [bits 3:1] is 1: FIXME) */ - - n = (PNX8550_CM_PLL0_CTL & PNX8550_CM_PLL_N_MASK) >> 16; - m = (PNX8550_CM_PLL0_CTL & PNX8550_CM_PLL_M_MASK) >> 8; - p = (PNX8550_CM_PLL0_CTL & PNX8550_CM_PLL_P_MASK) >> 2; - pow2p = (1 << p); - - db_assert(m != 0 && pow2p != 0); - - /* - * Compute the frequency as in the PNX8550 User Manual 1.0, p.186 - * (a.k.a. 8-10). Divide by HZ for a timer offset that results in - * HZ timer interrupts per second. - */ - mips_hpt_frequency = 27UL * ((1000000UL * n)/(m * pow2p)); - cpj = DIV_ROUND_CLOSEST(mips_hpt_frequency, HZ); - write_c0_count(0); - timer_ack(); - - /* Setup Timer 2 */ - write_c0_count2(0); - write_c0_compare2(0xffffffff); - - setup_irq(PNX8550_INT_TIMER1, &pnx8xxx_timer_irq); - setup_irq(PNX8550_INT_TIMER2, &monotonic_irqaction); -} diff --git a/arch/mips/nxp/pnx8550/jbs/Makefile b/arch/mips/nxp/pnx8550/jbs/Makefile deleted file mode 100644 index ad6a8ca7d8ce..000000000000 --- a/arch/mips/nxp/pnx8550/jbs/Makefile +++ /dev/null @@ -1,4 +0,0 @@ - -# Makefile for the NXP JBS Board. - -lib-y := init.o board_setup.o irqmap.o diff --git a/arch/mips/nxp/pnx8550/jbs/board_setup.c b/arch/mips/nxp/pnx8550/jbs/board_setup.c deleted file mode 100644 index 57dd903ca408..000000000000 --- a/arch/mips/nxp/pnx8550/jbs/board_setup.c +++ /dev/null @@ -1,56 +0,0 @@ -/* - * JBS Specific board startup routines. - * - * Copyright 2005, Embedded Alley Solutions, Inc - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ -#include <linux/init.h> -#include <linux/sched.h> -#include <linux/ioport.h> -#include <linux/mm.h> -#include <linux/console.h> -#include <linux/mc146818rtc.h> -#include <linux/delay.h> - -#include <asm/cpu.h> -#include <asm/bootinfo.h> -#include <asm/irq.h> -#include <asm/mipsregs.h> -#include <asm/reboot.h> -#include <asm/pgtable.h> - -#include <glb.h> - -/* CP0 hazard avoidance. */ -#define BARRIER __asm__ __volatile__(".set noreorder\n\t" \ - "nop; nop; nop; nop; nop; nop;\n\t" \ - ".set reorder\n\t") - -void __init board_setup(void) -{ - unsigned long configpr; - - configpr = read_c0_config7(); - configpr |= (1<<19); /* enable tlb */ - write_c0_config7(configpr); - BARRIER; -} diff --git a/arch/mips/nxp/pnx8550/jbs/init.c b/arch/mips/nxp/pnx8550/jbs/init.c deleted file mode 100644 index d59b4a4e5e8b..000000000000 --- a/arch/mips/nxp/pnx8550/jbs/init.c +++ /dev/null @@ -1,53 +0,0 @@ -/* - * - * Copyright 2005 Embedded Alley Solutions, Inc - * source@embeddedalley.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include <linux/init.h> -#include <linux/mm.h> -#include <linux/sched.h> -#include <linux/bootmem.h> -#include <asm/addrspace.h> -#include <asm/bootinfo.h> -#include <linux/string.h> -#include <linux/kernel.h> - -int prom_argc; -char **prom_argv, **prom_envp; -extern void __init prom_init_cmdline(void); -extern char *prom_getenv(char *envname); - -const char *get_system_type(void) -{ - return "NXP PNX8550/JBS"; -} - -void __init prom_init(void) -{ - unsigned long memsize; - - //memsize = 0x02800000; /* Trimedia uses memory above */ - memsize = 0x08000000; /* Trimedia uses memory above */ - add_memory_region(0, memsize, BOOT_MEM_RAM); -} diff --git a/arch/mips/nxp/pnx8550/jbs/irqmap.c b/arch/mips/nxp/pnx8550/jbs/irqmap.c deleted file mode 100644 index 7fc89842002c..000000000000 --- a/arch/mips/nxp/pnx8550/jbs/irqmap.c +++ /dev/null @@ -1,35 +0,0 @@ -/* - * NXP JBS board irqmap. - * - * Copyright 2005 Embedded Alley Solutions, Inc - * source@embeddealley.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include <linux/init.h> -#include <int.h> - -char pnx8550_irq_tab[][5] __initdata = { - [8] = { -1, PNX8550_INT_PCI_INTA, 0xff, 0xff, 0xff}, - [9] = { -1, PNX8550_INT_PCI_INTA, 0xff, 0xff, 0xff}, - [17] = { -1, PNX8550_INT_PCI_INTA, 0xff, 0xff, 0xff}, -}; diff --git a/arch/mips/nxp/pnx8550/stb810/Makefile b/arch/mips/nxp/pnx8550/stb810/Makefile deleted file mode 100644 index ab91d72c5664..000000000000 --- a/arch/mips/nxp/pnx8550/stb810/Makefile +++ /dev/null @@ -1,4 +0,0 @@ - -# Makefile for the NXP STB810 Board. - -lib-y := prom_init.o board_setup.o irqmap.o diff --git a/arch/mips/nxp/pnx8550/stb810/board_setup.c b/arch/mips/nxp/pnx8550/stb810/board_setup.c deleted file mode 100644 index af2a55e0b4e9..000000000000 --- a/arch/mips/nxp/pnx8550/stb810/board_setup.c +++ /dev/null @@ -1,41 +0,0 @@ -/* - * STB810 specific board startup routines. - * - * Based on the arch/mips/nxp/pnx8550/jbs/board_setup.c - * - * Author: MontaVista Software, Inc. - * source@mvista.com - * - * Copyright 2005 MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include <linux/init.h> -#include <linux/sched.h> -#include <linux/ioport.h> -#include <linux/mm.h> -#include <linux/console.h> -#include <linux/mc146818rtc.h> -#include <linux/delay.h> - -#include <asm/cpu.h> -#include <asm/bootinfo.h> -#include <asm/irq.h> -#include <asm/mipsregs.h> -#include <asm/reboot.h> -#include <asm/pgtable.h> - -#include <glb.h> - -void __init board_setup(void) -{ - unsigned long configpr; - - configpr = read_c0_config7(); - configpr |= (1<<19); /* enable tlb */ - write_c0_config7(configpr); -} diff --git a/arch/mips/nxp/pnx8550/stb810/irqmap.c b/arch/mips/nxp/pnx8550/stb810/irqmap.c deleted file mode 100644 index 8c034963ddcd..000000000000 --- a/arch/mips/nxp/pnx8550/stb810/irqmap.c +++ /dev/null @@ -1,22 +0,0 @@ -/* - * NXP STB810 board irqmap. - * - * Author: MontaVista Software, Inc. - * source@mvista.com - * - * Copyright 2005 MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include <linux/init.h> -#include <int.h> - -char pnx8550_irq_tab[][5] __initdata = { - [8] = { -1, PNX8550_INT_PCI_INTA, 0xff, 0xff, 0xff}, - [9] = { -1, PNX8550_INT_PCI_INTA, 0xff, 0xff, 0xff}, - [10] = { -1, PNX8550_INT_PCI_INTA, 0xff, 0xff, 0xff}, -}; diff --git a/arch/mips/nxp/pnx8550/stb810/prom_init.c b/arch/mips/nxp/pnx8550/stb810/prom_init.c deleted file mode 100644 index ca7f4ada0640..000000000000 --- a/arch/mips/nxp/pnx8550/stb810/prom_init.c +++ /dev/null @@ -1,46 +0,0 @@ -/* - * STB810 specific prom routines - * - * Author: MontaVista Software, Inc. - * source@mvista.com - * - * Copyright 2005 MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include <linux/init.h> -#include <linux/mm.h> -#include <linux/sched.h> -#include <linux/bootmem.h> -#include <asm/addrspace.h> -#include <asm/bootinfo.h> -#include <linux/string.h> -#include <linux/kernel.h> - -int prom_argc; -char **prom_argv, **prom_envp; -extern void __init prom_init_cmdline(void); -extern char *prom_getenv(char *envname); - -const char *get_system_type(void) -{ - return "NXP PNX8950/STB810"; -} - -void __init prom_init(void) -{ - unsigned long memsize; - - prom_argc = (int) fw_arg0; - prom_argv = (char **) fw_arg1; - prom_envp = (char **) fw_arg2; - - prom_init_cmdline(); - - memsize = 0x08000000; /* Trimedia uses memory above */ - add_memory_region(0, memsize, BOOT_MEM_RAM); -} |
