diff options
Diffstat (limited to 'arch/mips/netlogic/xlp/usb-init-xlp2.c')
| -rw-r--r-- | arch/mips/netlogic/xlp/usb-init-xlp2.c | 218 |
1 files changed, 218 insertions, 0 deletions
diff --git a/arch/mips/netlogic/xlp/usb-init-xlp2.c b/arch/mips/netlogic/xlp/usb-init-xlp2.c new file mode 100644 index 000000000000..36e9c22afc46 --- /dev/null +++ b/arch/mips/netlogic/xlp/usb-init-xlp2.c @@ -0,0 +1,218 @@ +/* + * Copyright (c) 2003-2013 Broadcom Corporation + * All Rights Reserved + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the Broadcom + * license below: + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * + * THIS SOFTWARE IS PROVIDED BY BROADCOM ``AS IS'' AND ANY EXPRESS OR + * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR + * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, + * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE + * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN + * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include <linux/dma-mapping.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/init.h> +#include <linux/pci.h> +#include <linux/platform_device.h> +#include <linux/irq.h> + +#include <asm/netlogic/common.h> +#include <asm/netlogic/haldefs.h> +#include <asm/netlogic/xlp-hal/iomap.h> +#include <asm/netlogic/xlp-hal/xlp.h> + +#define XLPII_USB3_CTL_0 0xc0 +#define XLPII_VAUXRST BIT(0) +#define XLPII_VCCRST BIT(1) +#define XLPII_NUM2PORT 9 +#define XLPII_NUM3PORT 13 +#define XLPII_RTUNEREQ BIT(20) +#define XLPII_MS_CSYSREQ BIT(21) +#define XLPII_XS_CSYSREQ BIT(22) +#define XLPII_RETENABLEN BIT(23) +#define XLPII_TX2RX BIT(24) +#define XLPII_XHCIREV BIT(25) +#define XLPII_ECCDIS BIT(26) + +#define XLPII_USB3_INT_REG 0xc2 +#define XLPII_USB3_INT_MASK 0xc3 + +#define XLPII_USB_PHY_TEST 0xc6 +#define XLPII_PRESET BIT(0) +#define XLPII_ATERESET BIT(1) +#define XLPII_LOOPEN BIT(2) +#define XLPII_TESTPDHSP BIT(3) +#define XLPII_TESTPDSSP BIT(4) +#define XLPII_TESTBURNIN BIT(5) + +#define XLPII_USB_PHY_LOS_LV 0xc9 +#define XLPII_LOSLEV 0 +#define XLPII_LOSBIAS 5 +#define XLPII_SQRXTX 8 +#define XLPII_TXBOOST 11 +#define XLPII_RSLKSEL 16 +#define XLPII_FSEL 20 + +#define XLPII_USB_RFCLK_REG 0xcc +#define XLPII_VVLD 30 + +#define nlm_read_usb_reg(b, r) nlm_read_reg(b, r) +#define nlm_write_usb_reg(b, r, v) nlm_write_reg(b, r, v) + +#define nlm_xlpii_get_usb_pcibase(node, inst) \ + nlm_pcicfg_base(XLP2XX_IO_USB_OFFSET(node, inst)) +#define nlm_xlpii_get_usb_regbase(node, inst) \ + (nlm_xlpii_get_usb_pcibase(node, inst) + XLP_IO_PCI_HDRSZ) + +static void xlpii_usb_ack(struct irq_data *data) +{ + u64 port_addr; + + switch (data->irq) { + case PIC_2XX_XHCI_0_IRQ: + port_addr = nlm_xlpii_get_usb_regbase(0, 1); + break; + case PIC_2XX_XHCI_1_IRQ: + port_addr = nlm_xlpii_get_usb_regbase(0, 2); + break; + case PIC_2XX_XHCI_2_IRQ: + port_addr = nlm_xlpii_get_usb_regbase(0, 3); + break; + default: + pr_err("No matching USB irq!\n"); + return; + } + nlm_write_usb_reg(port_addr, XLPII_USB3_INT_REG, 0xffffffff); +} + +static void nlm_xlpii_usb_hw_reset(int node, int port) +{ + u64 port_addr, xhci_base, pci_base; + void __iomem *corebase; + u32 val; + + port_addr = nlm_xlpii_get_usb_regbase(node, port); + + /* Set frequency */ + val = nlm_read_usb_reg(port_addr, XLPII_USB_PHY_LOS_LV); + val &= ~(0x3f << XLPII_FSEL); + val |= (0x27 << XLPII_FSEL); + nlm_write_usb_reg(port_addr, XLPII_USB_PHY_LOS_LV, val); + + val = nlm_read_usb_reg(port_addr, XLPII_USB_RFCLK_REG); + val |= (1 << XLPII_VVLD); + nlm_write_usb_reg(port_addr, XLPII_USB_RFCLK_REG, val); + + /* PHY reset */ + val = nlm_read_usb_reg(port_addr, XLPII_USB_PHY_TEST); + val &= (XLPII_ATERESET | XLPII_LOOPEN | XLPII_TESTPDHSP + | XLPII_TESTPDSSP | XLPII_TESTBURNIN); + nlm_write_usb_reg(port_addr, XLPII_USB_PHY_TEST, val); + + /* Setup control register */ + val = XLPII_VAUXRST | XLPII_VCCRST | (1 << XLPII_NUM2PORT) + | (1 << XLPII_NUM3PORT) | XLPII_MS_CSYSREQ | XLPII_XS_CSYSREQ + | XLPII_RETENABLEN | XLPII_XHCIREV; + nlm_write_usb_reg(port_addr, XLPII_USB3_CTL_0, val); + + /* Enable interrupts */ + nlm_write_usb_reg(port_addr, XLPII_USB3_INT_MASK, 0x00000001); + + /* Clear all interrupts */ + nlm_write_usb_reg(port_addr, XLPII_USB3_INT_REG, 0xffffffff); + + udelay(2000); + + /* XHCI configuration at PCI mem */ + pci_base = nlm_xlpii_get_usb_pcibase(node, port); + xhci_base = nlm_read_usb_reg(pci_base, 0x4) & ~0xf; + corebase = ioremap(xhci_base, 0x10000); + if (!corebase) + return; + + writel(0x240002, corebase + 0xc2c0); + /* GCTL 0xc110 */ + val = readl(corebase + 0xc110); + val &= ~(0x3 << 12); + val |= (1 << 12); + writel(val, corebase + 0xc110); + udelay(100); + + /* PHYCFG 0xc200 */ + val = readl(corebase + 0xc200); + val &= ~(1 << 6); + writel(val, corebase + 0xc200); + udelay(100); + + /* PIPECTL 0xc2c0 */ + val = readl(corebase + 0xc2c0); + val &= ~(1 << 17); + writel(val, corebase + 0xc2c0); + + iounmap(corebase); +} + +static int __init nlm_platform_xlpii_usb_init(void) +{ + if (!cpu_is_xlpii()) + return 0; + + pr_info("Initializing 2XX USB Interface\n"); + nlm_xlpii_usb_hw_reset(0, 1); + nlm_xlpii_usb_hw_reset(0, 2); + nlm_xlpii_usb_hw_reset(0, 3); + nlm_set_pic_extra_ack(0, PIC_2XX_XHCI_0_IRQ, xlpii_usb_ack); + nlm_set_pic_extra_ack(0, PIC_2XX_XHCI_1_IRQ, xlpii_usb_ack); + nlm_set_pic_extra_ack(0, PIC_2XX_XHCI_2_IRQ, xlpii_usb_ack); + + return 0; +} + +arch_initcall(nlm_platform_xlpii_usb_init); + +static u64 xlp_usb_dmamask = ~(u32)0; + +/* Fixup IRQ for USB devices on XLP the SoC PCIe bus */ +static void nlm_usb_fixup_final(struct pci_dev *dev) +{ + dev->dev.dma_mask = &xlp_usb_dmamask; + dev->dev.coherent_dma_mask = DMA_BIT_MASK(32); + switch (dev->devfn) { + case 0x21: + dev->irq = PIC_2XX_XHCI_0_IRQ; + break; + case 0x22: + dev->irq = PIC_2XX_XHCI_1_IRQ; + break; + case 0x23: + dev->irq = PIC_2XX_XHCI_2_IRQ; + break; + } +} + +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_NETLOGIC, PCI_DEVICE_ID_NLM_XHCI, + nlm_usb_fixup_final); |
