diff options
Diffstat (limited to 'arch/mips/netlogic/common/reset.S')
| -rw-r--r-- | arch/mips/netlogic/common/reset.S | 63 |
1 files changed, 46 insertions, 17 deletions
diff --git a/arch/mips/netlogic/common/reset.S b/arch/mips/netlogic/common/reset.S index adb18288a6c0..b231fe1e7a09 100644 --- a/arch/mips/netlogic/common/reset.S +++ b/arch/mips/netlogic/common/reset.S @@ -32,10 +32,10 @@ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ -#include <linux/init.h> #include <asm/asm.h> #include <asm/asm-offsets.h> +#include <asm/cacheops.h> #include <asm/regdef.h> #include <asm/mipsregs.h> #include <asm/stackframe.h> @@ -50,8 +50,8 @@ #include <asm/netlogic/xlp-hal/cpucontrol.h> #define CP0_EBASE $15 -#define SYS_CPU_COHERENT_BASE(node) CKSEG1ADDR(XLP_DEFAULT_IO_BASE) + \ - XLP_IO_SYS_OFFSET(node) + XLP_IO_PCI_HDRSZ + \ +#define SYS_CPU_COHERENT_BASE CKSEG1ADDR(XLP_DEFAULT_IO_BASE) + \ + XLP_IO_SYS_OFFSET(0) + XLP_IO_PCI_HDRSZ + \ SYS_CPU_NONCOHERENT_MODE * 4 /* Enable XLP features and workarounds in the LSU */ @@ -74,35 +74,55 @@ .endm /* - * Low level flush for L1D cache on XLP, the normal cache ops does - * not do the complete and correct cache flush. + * L1D cache has to be flushed before enabling threads in XLP. + * On XLP8xx/XLP3xx, we do a low level flush using processor control + * registers. On XLPII CPUs, usual cache instructions work. */ .macro xlp_flush_l1_dcache + mfc0 t0, CP0_EBASE, 0 + andi t0, t0, 0xff00 + slt t1, t0, 0x1200 + beqz t1, 15f + nop + + /* XLP8xx low level cache flush */ li t0, LSU_DEBUG_DATA0 li t1, LSU_DEBUG_ADDR li t2, 0 /* index */ li t3, 0x1000 /* loop count */ -1: +11: sll v0, t2, 5 mtcr zero, t0 ori v1, v0, 0x3 /* way0 | write_enable | write_active */ mtcr v1, t1 -2: +12: mfcr v1, t1 andi v1, 0x1 /* wait for write_active == 0 */ - bnez v1, 2b + bnez v1, 12b nop mtcr zero, t0 ori v1, v0, 0x7 /* way1 | write_enable | write_active */ mtcr v1, t1 -3: +13: mfcr v1, t1 andi v1, 0x1 /* wait for write_active == 0 */ - bnez v1, 3b + bnez v1, 13b nop addi t2, 1 - bne t3, t2, 1b + bne t3, t2, 11b + nop + b 17f + nop + + /* XLPII CPUs, Invalidate all 64k of L1 D-cache */ +15: + li t0, 0x80000000 + li t1, 0x80010000 +16: cache Index_Writeback_Inv_D, 0(t0) + addiu t0, t0, 32 + bne t0, t1, 16b nop +17: .endm /* @@ -138,6 +158,13 @@ FEXPORT(nlm_reset_entry) nop 1: /* Entry point on core wakeup */ + mfc0 t0, CP0_EBASE, 0 /* processor ID */ + andi t0, 0xff00 + li t1, 0x1500 /* XLP 9xx */ + beq t0, t1, 2f /* does not need to set coherent */ + nop + + /* set bit in SYS coherent register for the core */ mfc0 t0, CP0_EBASE, 1 mfc0 t1, CP0_EBASE, 1 srl t1, 5 @@ -149,7 +176,7 @@ FEXPORT(nlm_reset_entry) li t1, 0x1 sll t0, t1, t0 nor t0, t0, zero /* t0 <- ~(1 << core) */ - li t2, SYS_CPU_COHERENT_BASE(0) + li t2, SYS_CPU_COHERENT_BASE add t2, t2, t3 /* t2 <- SYS offset for node */ lw t1, 0(t2) and t1, t1, t0 @@ -159,13 +186,13 @@ FEXPORT(nlm_reset_entry) lw t1, 0(t2) sync +2: /* Configure LSU on Non-0 Cores. */ xlp_config_lsu /* FALL THROUGH */ /* - * Wake up sibling threads from the initial thread in - * a core. + * Wake up sibling threads from the initial thread in a core. */ EXPORT(nlm_boot_siblings) /* core L1D flush before enable threads */ @@ -181,8 +208,10 @@ EXPORT(nlm_boot_siblings) /* * The new hardware thread starts at the next instruction * For all the cases other than core 0 thread 0, we will - * jump to the secondary wait function. - */ + * jump to the secondary wait function. + + * NOTE: All GPR contents are lost after the mtcr above! + */ mfc0 v0, CP0_EBASE, 1 andi v0, 0x3ff /* v0 <- node/core */ @@ -196,7 +225,7 @@ EXPORT(nlm_boot_siblings) #endif mtc0 t1, CP0_STATUS - /* mark CPU ready, careful here, previous mtcr trashed registers */ + /* mark CPU ready */ li t3, CKSEG1ADDR(RESET_DATA_PHYS) ADDIU t1, t3, BOOT_CPU_READY sll v1, v0, 2 |
