summaryrefslogtreecommitdiffstats
path: root/arch/mips/mti-malta
diff options
context:
space:
mode:
Diffstat (limited to 'arch/mips/mti-malta')
-rw-r--r--arch/mips/mti-malta/Makefile1
-rw-r--r--arch/mips/mti-malta/malta-init.c54
-rw-r--r--arch/mips/mti-malta/malta-kgdb.c133
-rw-r--r--arch/mips/mti-malta/malta-setup.c4
4 files changed, 0 insertions, 192 deletions
diff --git a/arch/mips/mti-malta/Makefile b/arch/mips/mti-malta/Makefile
index f8064446e812..3b7dd722c32a 100644
--- a/arch/mips/mti-malta/Makefile
+++ b/arch/mips/mti-malta/Makefile
@@ -13,7 +13,6 @@ obj-y := malta-amon.o malta-cmdline.o \
obj-$(CONFIG_EARLY_PRINTK) += malta-console.o
obj-$(CONFIG_PCI) += malta-pci.o
-obj-$(CONFIG_KGDB) += malta-kgdb.o
# FIXME FIXME FIXME
obj-$(CONFIG_MIPS_MT_SMTC) += malta_smtc.o
diff --git a/arch/mips/mti-malta/malta-init.c b/arch/mips/mti-malta/malta-init.c
index c0653021a171..4832af251668 100644
--- a/arch/mips/mti-malta/malta-init.c
+++ b/arch/mips/mti-malta/malta-init.c
@@ -37,15 +37,6 @@
#include <asm/mips-boards/malta.h>
-#ifdef CONFIG_KGDB
-extern int rs_kgdb_hook(int, int);
-extern int rs_putDebugChar(char);
-extern char rs_getDebugChar(void);
-extern int saa9730_kgdb_hook(int);
-extern int saa9730_putDebugChar(char);
-extern char saa9730_getDebugChar(void);
-#endif
-
int prom_argc;
int *_prom_argv, *_prom_envp;
@@ -173,51 +164,6 @@ static void __init console_config(void)
}
#endif
-#ifdef CONFIG_KGDB
-void __init kgdb_config(void)
-{
- extern int (*generic_putDebugChar)(char);
- extern char (*generic_getDebugChar)(void);
- char *argptr;
- int line, speed;
-
- argptr = prom_getcmdline();
- if ((argptr = strstr(argptr, "kgdb=ttyS")) != NULL) {
- argptr += strlen("kgdb=ttyS");
- if (*argptr != '0' && *argptr != '1')
- printk("KGDB: Unknown serial line /dev/ttyS%c, "
- "falling back to /dev/ttyS1\n", *argptr);
- line = *argptr == '0' ? 0 : 1;
- printk("KGDB: Using serial line /dev/ttyS%d for session\n", line);
-
- speed = 0;
- if (*++argptr == ',')
- {
- int c;
- while ((c = *++argptr) && ('0' <= c && c <= '9'))
- speed = speed * 10 + c - '0';
- }
- {
- speed = rs_kgdb_hook(line, speed);
- generic_putDebugChar = rs_putDebugChar;
- generic_getDebugChar = rs_getDebugChar;
- }
-
- pr_info("KGDB: Using serial line /dev/ttyS%d at %d for "
- "session, please connect your debugger\n",
- line ? 1 : 0, speed);
-
- {
- char *s;
- for (s = "Please connect GDB to this port\r\n"; *s; )
- generic_putDebugChar(*s++);
- }
-
- /* Breakpoint is invoked after interrupts are initialised */
- }
-}
-#endif
-
static void __init mips_nmi_setup(void)
{
void *base;
diff --git a/arch/mips/mti-malta/malta-kgdb.c b/arch/mips/mti-malta/malta-kgdb.c
deleted file mode 100644
index 6a1854de4579..000000000000
--- a/arch/mips/mti-malta/malta-kgdb.c
+++ /dev/null
@@ -1,133 +0,0 @@
-/*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved.
- *
- * This program is free software; you can distribute it and/or modify it
- * under the terms of the GNU General Public License (Version 2) as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
- * for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * This is the interface to the remote debugger stub.
- */
-#include <linux/types.h>
-#include <linux/serial.h>
-#include <linux/serialP.h>
-#include <linux/serial_reg.h>
-
-#include <asm/serial.h>
-#include <asm/io.h>
-
-static struct serial_state rs_table[] = {
- SERIAL_PORT_DFNS /* Defined in serial.h */
-};
-
-static struct async_struct kdb_port_info = {0};
-
-int (*generic_putDebugChar)(char);
-char (*generic_getDebugChar)(void);
-
-static __inline__ unsigned int serial_in(struct async_struct *info, int offset)
-{
- return inb(info->port + offset);
-}
-
-static __inline__ void serial_out(struct async_struct *info, int offset,
- int value)
-{
- outb(value, info->port+offset);
-}
-
-int rs_kgdb_hook(int tty_no, int speed) {
- int t;
- struct serial_state *ser = &rs_table[tty_no];
-
- kdb_port_info.state = ser;
- kdb_port_info.magic = SERIAL_MAGIC;
- kdb_port_info.port = ser->port;
- kdb_port_info.flags = ser->flags;
-
- /*
- * Clear all interrupts
- */
- serial_in(&kdb_port_info, UART_LSR);
- serial_in(&kdb_port_info, UART_RX);
- serial_in(&kdb_port_info, UART_IIR);
- serial_in(&kdb_port_info, UART_MSR);
-
- /*
- * Now, initialize the UART
- */
- serial_out(&kdb_port_info, UART_LCR, UART_LCR_WLEN8); /* reset DLAB */
- if (kdb_port_info.flags & ASYNC_FOURPORT) {
- kdb_port_info.MCR = UART_MCR_DTR | UART_MCR_RTS;
- t = UART_MCR_DTR | UART_MCR_OUT1;
- } else {
- kdb_port_info.MCR
- = UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2;
- t = UART_MCR_DTR | UART_MCR_RTS;
- }
-
- kdb_port_info.MCR = t; /* no interrupts, please */
- serial_out(&kdb_port_info, UART_MCR, kdb_port_info.MCR);
-
- /*
- * and set the speed of the serial port
- */
- if (speed == 0)
- speed = 9600;
-
- t = kdb_port_info.state->baud_base / speed;
- /* set DLAB */
- serial_out(&kdb_port_info, UART_LCR, UART_LCR_WLEN8 | UART_LCR_DLAB);
- serial_out(&kdb_port_info, UART_DLL, t & 0xff);/* LS of divisor */
- serial_out(&kdb_port_info, UART_DLM, t >> 8); /* MS of divisor */
- /* reset DLAB */
- serial_out(&kdb_port_info, UART_LCR, UART_LCR_WLEN8);
-
- return speed;
-}
-
-int putDebugChar(char c)
-{
- return generic_putDebugChar(c);
-}
-
-char getDebugChar(void)
-{
- return generic_getDebugChar();
-}
-
-int rs_putDebugChar(char c)
-{
-
- if (!kdb_port_info.state) { /* need to init device first */
- return 0;
- }
-
- while ((serial_in(&kdb_port_info, UART_LSR) & UART_LSR_THRE) == 0)
- ;
-
- serial_out(&kdb_port_info, UART_TX, c);
-
- return 1;
-}
-
-char rs_getDebugChar(void)
-{
- if (!kdb_port_info.state) { /* need to init device first */
- return 0;
- }
-
- while (!(serial_in(&kdb_port_info, UART_LSR) & 1))
- ;
-
- return serial_in(&kdb_port_info, UART_RX);
-}
diff --git a/arch/mips/mti-malta/malta-setup.c b/arch/mips/mti-malta/malta-setup.c
index e7cad54936ca..dc78b8983eeb 100644
--- a/arch/mips/mti-malta/malta-setup.c
+++ b/arch/mips/mti-malta/malta-setup.c
@@ -199,10 +199,6 @@ void __init plat_mem_setup(void)
*/
enable_dma(4);
-#ifdef CONFIG_KGDB
- kgdb_config();
-#endif
-
#ifdef CONFIG_DMA_COHERENT
if (mips_revision_sconid != MIPS_REVISION_SCON_BONITO)
panic("Hardware DMA cache coherency not supported");
OpenPOWER on IntegriCloud