summaryrefslogtreecommitdiffstats
path: root/arch/mips/momentum
diff options
context:
space:
mode:
Diffstat (limited to 'arch/mips/momentum')
-rw-r--r--arch/mips/momentum/jaguar_atx/Makefile12
-rw-r--r--arch/mips/momentum/jaguar_atx/dbg_io.c126
-rw-r--r--arch/mips/momentum/jaguar_atx/int-handler.S128
-rw-r--r--arch/mips/momentum/jaguar_atx/irq.c67
-rw-r--r--arch/mips/momentum/jaguar_atx/ja-console.c106
-rw-r--r--arch/mips/momentum/jaguar_atx/jaguar_atx_fpga.h52
-rw-r--r--arch/mips/momentum/jaguar_atx/prom.c266
-rw-r--r--arch/mips/momentum/jaguar_atx/reset.c57
-rw-r--r--arch/mips/momentum/jaguar_atx/setup.c474
-rw-r--r--arch/mips/momentum/ocelot_3/Makefile8
-rw-r--r--arch/mips/momentum/ocelot_3/int-handler.S137
-rw-r--r--arch/mips/momentum/ocelot_3/irq.c81
-rw-r--r--arch/mips/momentum/ocelot_3/ocelot_3_fpga.h57
-rw-r--r--arch/mips/momentum/ocelot_3/prom.c248
-rw-r--r--arch/mips/momentum/ocelot_3/reset.c59
-rw-r--r--arch/mips/momentum/ocelot_3/setup.c398
-rw-r--r--arch/mips/momentum/ocelot_c/Makefile8
-rw-r--r--arch/mips/momentum/ocelot_c/cpci-irq.c153
-rw-r--r--arch/mips/momentum/ocelot_c/dbg_io.c126
-rw-r--r--arch/mips/momentum/ocelot_c/int-handler.S102
-rw-r--r--arch/mips/momentum/ocelot_c/irq.c83
-rw-r--r--arch/mips/momentum/ocelot_c/ocelot_c_fpga.h60
-rw-r--r--arch/mips/momentum/ocelot_c/prom.c243
-rw-r--r--arch/mips/momentum/ocelot_c/reset.c59
-rw-r--r--arch/mips/momentum/ocelot_c/setup.c363
-rw-r--r--arch/mips/momentum/ocelot_c/uart-irq.c147
-rw-r--r--arch/mips/momentum/ocelot_g/Makefile8
-rw-r--r--arch/mips/momentum/ocelot_g/dbg_io.c126
-rw-r--r--arch/mips/momentum/ocelot_g/gt-irq.c214
-rw-r--r--arch/mips/momentum/ocelot_g/int-handler.S131
-rw-r--r--arch/mips/momentum/ocelot_g/irq.c69
-rw-r--r--arch/mips/momentum/ocelot_g/ocelot_pld.h30
-rw-r--r--arch/mips/momentum/ocelot_g/prom.c86
-rw-r--r--arch/mips/momentum/ocelot_g/reset.c47
-rw-r--r--arch/mips/momentum/ocelot_g/setup.c266
35 files changed, 4597 insertions, 0 deletions
diff --git a/arch/mips/momentum/jaguar_atx/Makefile b/arch/mips/momentum/jaguar_atx/Makefile
new file mode 100644
index 000000000000..20bbd3ea44a8
--- /dev/null
+++ b/arch/mips/momentum/jaguar_atx/Makefile
@@ -0,0 +1,12 @@
+#
+# Makefile for Momentum Computer's Jaguar-ATX board.
+#
+# Note! Dependencies are done automagically by 'make dep', which also
+# removes any old dependencies. DON'T put your own dependencies here
+# unless it's something special (ie not a .c file).
+#
+
+obj-y += int-handler.o irq.o prom.o reset.o setup.o
+
+obj-$(CONFIG_SERIAL_8250_CONSOLE) += ja-console.o
+obj-$(CONFIG_REMOTE_DEBUG) += dbg_io.o
diff --git a/arch/mips/momentum/jaguar_atx/dbg_io.c b/arch/mips/momentum/jaguar_atx/dbg_io.c
new file mode 100644
index 000000000000..542eac82b63c
--- /dev/null
+++ b/arch/mips/momentum/jaguar_atx/dbg_io.c
@@ -0,0 +1,126 @@
+#include <linux/config.h>
+
+#if defined(CONFIG_REMOTE_DEBUG)
+
+#include <asm/serial.h> /* For the serial port location and base baud */
+
+/* --- CONFIG --- */
+
+typedef unsigned char uint8;
+typedef unsigned int uint32;
+
+/* --- END OF CONFIG --- */
+
+#define UART16550_BAUD_2400 2400
+#define UART16550_BAUD_4800 4800
+#define UART16550_BAUD_9600 9600
+#define UART16550_BAUD_19200 19200
+#define UART16550_BAUD_38400 38400
+#define UART16550_BAUD_57600 57600
+#define UART16550_BAUD_115200 115200
+
+#define UART16550_PARITY_NONE 0
+#define UART16550_PARITY_ODD 0x08
+#define UART16550_PARITY_EVEN 0x18
+#define UART16550_PARITY_MARK 0x28
+#define UART16550_PARITY_SPACE 0x38
+
+#define UART16550_DATA_5BIT 0x0
+#define UART16550_DATA_6BIT 0x1
+#define UART16550_DATA_7BIT 0x2
+#define UART16550_DATA_8BIT 0x3
+
+#define UART16550_STOP_1BIT 0x0
+#define UART16550_STOP_2BIT 0x4
+
+/* ----------------------------------------------------- */
+
+/* === CONFIG === */
+
+/* [jsun] we use the second serial port for kdb */
+#define BASE OCELOT_SERIAL1_BASE
+#define MAX_BAUD OCELOT_BASE_BAUD
+
+/* === END OF CONFIG === */
+
+#define REG_OFFSET 4
+
+/* register offset */
+#define OFS_RCV_BUFFER 0
+#define OFS_TRANS_HOLD 0
+#define OFS_SEND_BUFFER 0
+#define OFS_INTR_ENABLE (1*REG_OFFSET)
+#define OFS_INTR_ID (2*REG_OFFSET)
+#define OFS_DATA_FORMAT (3*REG_OFFSET)
+#define OFS_LINE_CONTROL (3*REG_OFFSET)
+#define OFS_MODEM_CONTROL (4*REG_OFFSET)
+#define OFS_RS232_OUTPUT (4*REG_OFFSET)
+#define OFS_LINE_STATUS (5*REG_OFFSET)
+#define OFS_MODEM_STATUS (6*REG_OFFSET)
+#define OFS_RS232_INPUT (6*REG_OFFSET)
+#define OFS_SCRATCH_PAD (7*REG_OFFSET)
+
+#define OFS_DIVISOR_LSB (0*REG_OFFSET)
+#define OFS_DIVISOR_MSB (1*REG_OFFSET)
+
+
+/* memory-mapped read/write of the port */
+#define UART16550_READ(y) (*((volatile uint8*)(BASE + y)))
+#define UART16550_WRITE(y, z) ((*((volatile uint8*)(BASE + y))) = z)
+
+void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop)
+{
+ /* disable interrupts */
+ UART16550_WRITE(OFS_INTR_ENABLE, 0);
+
+ /* set up buad rate */
+ {
+ uint32 divisor;
+
+ /* set DIAB bit */
+ UART16550_WRITE(OFS_LINE_CONTROL, 0x80);
+
+ /* set divisor */
+ divisor = MAX_BAUD / baud;
+ UART16550_WRITE(OFS_DIVISOR_LSB, divisor & 0xff);
+ UART16550_WRITE(OFS_DIVISOR_MSB, (divisor & 0xff00) >> 8);
+
+ /* clear DIAB bit */
+ UART16550_WRITE(OFS_LINE_CONTROL, 0x0);
+ }
+
+ /* set data format */
+ UART16550_WRITE(OFS_DATA_FORMAT, data | parity | stop);
+}
+
+static int remoteDebugInitialized = 0;
+
+uint8 getDebugChar(void)
+{
+ if (!remoteDebugInitialized) {
+ remoteDebugInitialized = 1;
+ debugInit(UART16550_BAUD_38400,
+ UART16550_DATA_8BIT,
+ UART16550_PARITY_NONE, UART16550_STOP_1BIT);
+ }
+
+ while ((UART16550_READ(OFS_LINE_STATUS) & 0x1) == 0);
+ return UART16550_READ(OFS_RCV_BUFFER);
+}
+
+
+int putDebugChar(uint8 byte)
+{
+ if (!remoteDebugInitialized) {
+ remoteDebugInitialized = 1;
+ debugInit(UART16550_BAUD_38400,
+ UART16550_DATA_8BIT,
+ UART16550_PARITY_NONE, UART16550_STOP_1BIT);
+ }
+
+ while ((UART16550_READ(OFS_LINE_STATUS) & 0x20) == 0);
+ UART16550_WRITE(OFS_SEND_BUFFER, byte);
+ return 1;
+}
+
+#endif
diff --git a/arch/mips/momentum/jaguar_atx/int-handler.S b/arch/mips/momentum/jaguar_atx/int-handler.S
new file mode 100644
index 000000000000..43fd5a58077c
--- /dev/null
+++ b/arch/mips/momentum/jaguar_atx/int-handler.S
@@ -0,0 +1,128 @@
+/*
+ * Copyright 2002 Momentum Computer Inc.
+ * Author: Matthew Dharm <mdharm@momenco.com>
+ *
+ * Based on work:
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: jsun@mvista.com or jsun@junsun.net
+ *
+ * First-level interrupt dispatcher for Jaguar-ATX board.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#include <asm/asm.h>
+#include <asm/mipsregs.h>
+#include <asm/addrspace.h>
+#include <asm/regdef.h>
+#include <asm/stackframe.h>
+
+/*
+ * First level interrupt dispatcher for Ocelot-CS board
+ */
+ .align 5
+ NESTED(jaguar_handle_int, PT_SIZE, sp)
+ SAVE_ALL
+ CLI
+ .set at
+ mfc0 t0, CP0_CAUSE
+ mfc0 t2, CP0_STATUS
+
+ and t0, t2
+
+ andi t1, t0, STATUSF_IP0 /* sw0 software interrupt */
+ bnez t1, ll_sw0_irq
+ andi t1, t0, STATUSF_IP1 /* sw1 software interrupt */
+ bnez t1, ll_sw1_irq
+ andi t1, t0, STATUSF_IP2 /* int0 hardware line */
+ bnez t1, ll_pcixa_irq
+ andi t1, t0, STATUSF_IP3 /* int1 hardware line */
+ bnez t1, ll_pcixb_irq
+ andi t1, t0, STATUSF_IP4 /* int2 hardware line */
+ bnez t1, ll_pcia_irq
+ andi t1, t0, STATUSF_IP5 /* int3 hardware line */
+ bnez t1, ll_pcib_irq
+ andi t1, t0, STATUSF_IP6 /* int4 hardware line */
+ bnez t1, ll_uart_irq
+ andi t1, t0, STATUSF_IP7 /* cpu timer */
+ bnez t1, ll_cputimer_irq
+
+ nop
+ nop
+
+ /* now look at extended interrupts */
+ mfc0 t0, CP0_CAUSE
+ cfc0 t1, CP0_S1_INTCONTROL
+
+ /* shift the mask 8 bits left to line up the bits */
+ sll t2, t1, 8
+
+ and t0, t2
+ srl t0, t0, 16
+
+ andi t1, t0, STATUSF_IP8 /* int6 hardware line */
+ bnez t1, ll_mv64340_decode_irq
+
+ nop
+ nop
+
+ .set reorder
+
+ /* wrong alarm or masked ... */
+ j spurious_interrupt
+ nop
+ END(jaguar_handle_int)
+
+ .align 5
+ll_sw0_irq:
+ li a0, 0
+ move a1, sp
+ jal do_IRQ
+ j ret_from_irq
+ll_sw1_irq:
+ li a0, 1
+ move a1, sp
+ jal do_IRQ
+ j ret_from_irq
+ll_pcixa_irq:
+ li a0, 2
+ move a1, sp
+ jal do_IRQ
+ j ret_from_irq
+
+ll_pcixb_irq:
+ li a0, 3
+ move a1, sp
+ jal do_IRQ
+ j ret_from_irq
+
+ll_pcia_irq:
+ li a0, 4
+ move a1, sp
+ jal do_IRQ
+ j ret_from_irq
+
+ll_pcib_irq:
+ li a0, 5
+ move a1, sp
+ jal do_IRQ
+ j ret_from_irq
+
+ll_uart_irq:
+ li a0, 6
+ move a1, sp
+ jal do_IRQ
+ j ret_from_irq
+
+ll_cputimer_irq:
+ li a0, 7
+ move a1, sp
+ jal ll_timer_interrupt
+ j ret_from_irq
+
+ll_mv64340_decode_irq:
+ move a0, sp
+ jal ll_mv64340_irq
+ j ret_from_irq
diff --git a/arch/mips/momentum/jaguar_atx/irq.c b/arch/mips/momentum/jaguar_atx/irq.c
new file mode 100644
index 000000000000..15588f91ace2
--- /dev/null
+++ b/arch/mips/momentum/jaguar_atx/irq.c
@@ -0,0 +1,67 @@
+/*
+ * Copyright (C) 2002 Momentum Computer, Inc.
+ * Author: Matthew Dharm, mdharm@momenco.com
+ *
+ * Based on work by:
+ * Copyright (C) 2000 RidgeRun, Inc.
+ * Author: RidgeRun, Inc.
+ * glonnon@ridgerun.com, skranz@ridgerun.com, stevej@ridgerun.com
+ *
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
+ *
+ * Copyright (C) 2000, 2001 Ralf Baechle (ralf@gnu.org)
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/signal.h>
+#include <linux/types.h>
+#include <asm/irq_cpu.h>
+#include <asm/mipsregs.h>
+
+extern asmlinkage void jaguar_handle_int(void);
+
+static struct irqaction cascade_mv64340 = {
+ no_action, SA_INTERRUPT, CPU_MASK_NONE, "MV64340-Cascade", NULL, NULL
+};
+
+void __init arch_init_irq(void)
+{
+ /*
+ * Clear all of the interrupts while we change the able around a bit.
+ * int-handler is not on bootstrap
+ */
+ clear_c0_status(ST0_IM);
+
+ /* Sets the first-level interrupt dispatcher. */
+ set_except_vector(0, jaguar_handle_int);
+ mips_cpu_irq_init(0);
+ rm7k_cpu_irq_init(8);
+
+ /* set up the cascading interrupts */
+ setup_irq(8, &cascade_mv64340);
+
+ mv64340_irq_init(16);
+
+ set_c0_status(ST0_IM);
+}
diff --git a/arch/mips/momentum/jaguar_atx/ja-console.c b/arch/mips/momentum/jaguar_atx/ja-console.c
new file mode 100644
index 000000000000..da6e1ed34db1
--- /dev/null
+++ b/arch/mips/momentum/jaguar_atx/ja-console.c
@@ -0,0 +1,106 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2001, 2002, 2004 Ralf Baechle
+ */
+#include <linux/init.h>
+#include <linux/console.h>
+#include <linux/kdev_t.h>
+#include <linux/major.h>
+#include <linux/termios.h>
+#include <linux/sched.h>
+#include <linux/tty.h>
+
+#include <linux/serial.h>
+#include <linux/serial_core.h>
+#include <asm/serial.h>
+
+/* SUPERIO uart register map */
+struct ja_uartregs {
+ union {
+ volatile u8 pad0[3];
+ volatile u8 rbr; /* read only, DLAB == 0 */
+ volatile u8 pad1[3];
+ volatile u8 thr; /* write only, DLAB == 0 */
+ volatile u8 pad2[3];
+ volatile u8 dll; /* DLAB == 1 */
+ } u1;
+ union {
+ volatile u8 pad0[3];
+ volatile u8 ier; /* DLAB == 0 */
+ volatile u8 pad1[3];
+ volatile u8 dlm; /* DLAB == 1 */
+ } u2;
+ union {
+ volatile u8 pad0[3];
+ volatile u8 iir; /* read only */
+ volatile u8 pad1[3];
+ volatile u8 fcr; /* write only */
+ } u3;
+ volatile u8 pad0[3];
+ volatile u8 iu_lcr;
+ volatile u8 pad1[3];
+ volatile u8 iu_mcr;
+ volatile u8 pad2[3];
+ volatile u8 iu_lsr;
+ volatile u8 pad3[3];
+ volatile u8 iu_msr;
+ volatile u8 pad4[3];
+ volatile u8 iu_scr;
+} ja_uregs_t;
+
+#define iu_rbr u1.rbr
+#define iu_thr u1.thr
+#define iu_dll u1.dll
+#define iu_ier u2.ier
+#define iu_dlm u2.dlm
+#define iu_iir u3.iir
+#define iu_fcr u3.fcr
+
+extern unsigned long uart_base;
+
+static inline struct ja_uartregs *console_uart(void)
+{
+ return (struct ja_uartregs *) (uart_base + 0x23UL);
+}
+
+void prom_putchar(char c)
+{
+ struct ja_uartregs *uart = console_uart();
+
+ while ((uart->iu_lsr & 0x20) == 0);
+ uart->iu_thr = c;
+}
+
+char __init prom_getchar(void)
+{
+ return 0;
+}
+
+static void inline ja_console_probe(void)
+{
+ struct uart_port up;
+
+ /*
+ * Register to interrupt zero because we share the interrupt with
+ * the serial driver which we don't properly support yet.
+ */
+ memset(&up, 0, sizeof(up));
+ up.membase = (unsigned char *) uart_base + 0x23UL;
+ up.irq = JAGUAR_ATX_SERIAL1_IRQ;
+ up.uartclk = JAGUAR_ATX_UART_CLK;
+ up.regshift = 2;
+ up.iotype = UPIO_MEM;
+ up.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
+ up.line = 0;
+
+ if (early_serial_setup(&up))
+ printk(KERN_ERR "Early serial init of port 0 failed\n");
+}
+
+__init void ja_setup_console(void)
+{
+ ja_console_probe();
+}
diff --git a/arch/mips/momentum/jaguar_atx/jaguar_atx_fpga.h b/arch/mips/momentum/jaguar_atx/jaguar_atx_fpga.h
new file mode 100644
index 000000000000..6978654c712b
--- /dev/null
+++ b/arch/mips/momentum/jaguar_atx/jaguar_atx_fpga.h
@@ -0,0 +1,52 @@
+/*
+ * Jaguar-ATX Board Register Definitions
+ *
+ * (C) 2002 Momentum Computer Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#ifndef __JAGUAR_ATX_FPGA_H__
+#define __JAGUAR_ATX_FPGA_H__
+
+#define JAGUAR_ATX_REG_BOARDREV 0x0
+#define JAGUAR_ATX_REG_FPGA_REV 0x1
+#define JAGUAR_ATX_REG_FPGA_TYPE 0x2
+#define JAGUAR_ATX_REG_RESET_STATUS 0x3
+#define JAGUAR_ATX_REG_BOARD_STATUS 0x4
+#define JAGUAR_ATX_REG_RESERVED1 0x5
+#define JAGUAR_ATX_REG_SET 0x6
+#define JAGUAR_ATX_REG_CLR 0x7
+#define JAGUAR_ATX_REG_EEPROM_MODE 0x9
+#define JAGUAR_ATX_REG_RESERVED2 0xa
+#define JAGUAR_ATX_REG_RESERVED3 0xb
+#define JAGUAR_ATX_REG_RESERVED4 0xc
+#define JAGUAR_ATX_REG_PHY_INTSTAT 0xd
+#define JAGUAR_ATX_REG_RESERVED5 0xe
+#define JAGUAR_ATX_REG_RESERVED6 0xf
+
+#define JAGUAR_ATX_CS0_ADDR 0xfc000000L
+
+extern unsigned long ja_fpga_base;
+
+#define JAGUAR_FPGA_WRITE(x,y) writeb(x, ja_fpga_base + JAGUAR_ATX_REG_##y)
+#define JAGUAR_FPGA_READ(x) readb(ja_fpga_base + JAGUAR_ATX_REG_##x)
+
+#endif
diff --git a/arch/mips/momentum/jaguar_atx/prom.c b/arch/mips/momentum/jaguar_atx/prom.c
new file mode 100644
index 000000000000..fa5982ac0ac6
--- /dev/null
+++ b/arch/mips/momentum/jaguar_atx/prom.c
@@ -0,0 +1,266 @@
+/*
+ * Copyright 2002 Momentum Computer Inc.
+ * Author: Matthew Dharm <mdharm@momenco.com>
+ *
+ * Louis Hamilton, Red Hat, Inc.
+ * hamilton@redhat.com [MIPS64 modifications]
+ *
+ * Based on Ocelot Linux port, which is
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: jsun@mvista.com or jsun@junsun.net
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * Added changes for SMP - Manish Lachwani (lachwani@pmc-sierra.com)
+ */
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/bootmem.h>
+
+#include <asm/addrspace.h>
+#include <asm/bootinfo.h>
+#include <asm/mv64340.h>
+#include <asm/pmon.h>
+
+#include "jaguar_atx_fpga.h"
+
+extern void ja_setup_console(void);
+
+struct callvectors *debug_vectors;
+
+extern unsigned long cpu_clock;
+
+const char *get_system_type(void)
+{
+ return "Momentum Jaguar-ATX";
+}
+
+#ifdef CONFIG_MV643XX_ETH
+extern unsigned char prom_mac_addr_base[6];
+
+static void burn_clocks(void)
+{
+ int i;
+
+ /* this loop should burn at least 1us -- this should be plenty */
+ for (i = 0; i < 0x10000; i++)
+ ;
+}
+
+static u8 exchange_bit(u8 val, u8 cs)
+{
+ /* place the data */
+ JAGUAR_FPGA_WRITE((val << 2) | cs, EEPROM_MODE);
+ burn_clocks();
+
+ /* turn the clock on */
+ JAGUAR_FPGA_WRITE((val << 2) | cs | 0x2, EEPROM_MODE);
+ burn_clocks();
+
+ /* turn the clock off and read-strobe */
+ JAGUAR_FPGA_WRITE((val << 2) | cs | 0x10, EEPROM_MODE);
+
+ /* return the data */
+ return ((JAGUAR_FPGA_READ(EEPROM_MODE) >> 3) & 0x1);
+}
+
+void get_mac(char dest[6])
+{
+ u8 read_opcode[12] = {1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
+ int i,j;
+
+ for (i = 0; i < 12; i++)
+ exchange_bit(read_opcode[i], 1);
+
+ for (j = 0; j < 6; j++) {
+ dest[j] = 0;
+ for (i = 0; i < 8; i++) {
+ dest[j] <<= 1;
+ dest[j] |= exchange_bit(0, 1);
+ }
+ }
+
+ /* turn off CS */
+ exchange_bit(0,0);
+}
+#endif
+
+#ifdef CONFIG_MIPS64
+
+unsigned long signext(unsigned long addr)
+{
+ addr &= 0xffffffff;
+ return (unsigned long)((int)addr);
+}
+
+void *get_arg(unsigned long args, int arc)
+{
+ unsigned long ul;
+ unsigned char *puc, uc;
+
+ args += (arc * 4);
+ ul = (unsigned long)signext(args);
+ puc = (unsigned char *)ul;
+ if (puc == 0)
+ return (void *)0;
+
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
+ uc = *puc++;
+ l = (unsigned long)uc;
+ uc = *puc++;
+ ul |= (((unsigned long)uc) << 8);
+ uc = *puc++;
+ ul |= (((unsigned long)uc) << 16);
+ uc = *puc++;
+ ul |= (((unsigned long)uc) << 24);
+#else
+ uc = *puc++;
+ ul = ((unsigned long)uc) << 24;
+ uc = *puc++;
+ ul |= (((unsigned long)uc) << 16);
+ uc = *puc++;
+ ul |= (((unsigned long)uc) << 8);
+ uc = *puc++;
+ ul |= ((unsigned long)uc);
+#endif
+ ul = signext(ul);
+
+ return (void *)ul;
+}
+
+char *arg64(unsigned long addrin, int arg_index)
+{
+ unsigned long args;
+ char *p;
+
+ args = signext(addrin);
+ p = (char *)get_arg(args, arg_index);
+
+ return p;
+}
+#endif /* CONFIG_MIPS64 */
+
+/* PMON passes arguments in C main() style */
+void __init prom_init(void)
+{
+ int argc = fw_arg0;
+ char **arg = (char **) fw_arg1;
+ char **env = (char **) fw_arg2;
+ struct callvectors *cv = (struct callvectors *) fw_arg3;
+ int i;
+
+#ifdef CONFIG_SERIAL_8250_CONSOLE
+// ja_setup_console(); /* The very first thing. */
+#endif
+
+#ifdef CONFIG_MIPS64
+ char *ptr;
+
+ printk("Mips64 Jaguar-ATX\n");
+ /* save the PROM vectors for debugging use */
+ debug_vectors = (struct callvectors *)signext((unsigned long)cv);
+
+ /* arg[0] is "g", the rest is boot parameters */
+ arcs_cmdline[0] = '\0';
+
+ for (i = 1; i < argc; i++) {
+ ptr = (char *)arg64((unsigned long)arg, i);
+ if ((strlen(arcs_cmdline) + strlen(ptr) + 1) >=
+ sizeof(arcs_cmdline))
+ break;
+ strcat(arcs_cmdline, ptr);
+ strcat(arcs_cmdline, " ");
+ }
+
+ i = 0;
+ while (1) {
+ ptr = (char *)arg64((unsigned long)env, i);
+ if (! ptr)
+ break;
+
+ if (strncmp("gtbase", ptr, strlen("gtbase")) == 0) {
+ marvell_base = simple_strtol(ptr + strlen("gtbase="),
+ NULL, 16);
+
+ if ((marvell_base & 0xffffffff00000000) == 0)
+ marvell_base |= 0xffffffff00000000;
+
+ printk("marvell_base set to 0x%016lx\n", marvell_base);
+ }
+ if (strncmp("cpuclock", ptr, strlen("cpuclock")) == 0) {
+ cpu_clock = simple_strtol(ptr + strlen("cpuclock="),
+ NULL, 10);
+ printk("cpu_clock set to %d\n", cpu_clock);
+ }
+ i++;
+ }
+ printk("arcs_cmdline: %s\n", arcs_cmdline);
+
+#else /* CONFIG_MIPS64 */
+ /* save the PROM vectors for debugging use */
+ debug_vectors = cv;
+
+ /* arg[0] is "g", the rest is boot parameters */
+ arcs_cmdline[0] = '\0';
+ for (i = 1; i < argc; i++) {
+ if (strlen(arcs_cmdline) + strlen(arg[i] + 1)
+ >= sizeof(arcs_cmdline))
+ break;
+ strcat(arcs_cmdline, arg[i]);
+ strcat(arcs_cmdline, " ");
+ }
+
+ while (*env) {
+ if (strncmp("gtbase", *env, strlen("gtbase")) == 0) {
+ marvell_base = simple_strtol(*env + strlen("gtbase="),
+ NULL, 16);
+ }
+ if (strncmp("cpuclock", *env, strlen("cpuclock")) == 0) {
+ cpu_clock = simple_strtol(*env + strlen("cpuclock="),
+ NULL, 10);
+ }
+ env++;
+ }
+#endif /* CONFIG_MIPS64 */
+ mips_machgroup = MACH_GROUP_MOMENCO;
+ mips_machtype = MACH_MOMENCO_JAGUAR_ATX;
+
+#ifdef CONFIG_MV643XX_ETH
+ /* get the base MAC address for on-board ethernet ports */
+ get_mac(prom_mac_addr_base);
+#endif
+}
+
+void __init prom_free_prom_memory(void)
+{
+}
+
+void __init prom_fixup_mem_map(unsigned long start, unsigned long end)
+{
+}
+
+int prom_boot_secondary(int cpu, unsigned long sp, unsigned long gp)
+{
+ /* Clear the semaphore */
+ *(volatile uint32_t *)(0xbb000a68) = 0x80000000;
+
+ return 1;
+}
+
+void prom_init_secondary(void)
+{
+ clear_c0_config(CONF_CM_CMASK);
+ set_c0_config(0x2);
+
+ clear_c0_status(ST0_IM);
+ set_c0_status(0x1ffff);
+}
+
+void prom_smp_finish(void)
+{
+}
diff --git a/arch/mips/momentum/jaguar_atx/reset.c b/arch/mips/momentum/jaguar_atx/reset.c
new file mode 100644
index 000000000000..48039484cdf9
--- /dev/null
+++ b/arch/mips/momentum/jaguar_atx/reset.c
@@ -0,0 +1,57 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * Copyright (C) 1997, 2001 Ralf Baechle
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: jsun@mvista.com or jsun@junsun.net
+ *
+ * Copyright (C) 2002 Momentum Computer Inc.
+ * Author: Matthew Dharm <mdharm@momenco.com>
+ *
+ * Louis Hamilton, Red Hat, Inc.
+ * hamilton@redhat.com [MIPS64 modifications]
+ */
+#include <linux/config.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <asm/io.h>
+#include <asm/pgtable.h>
+#include <asm/processor.h>
+#include <asm/reboot.h>
+#include <asm/system.h>
+#include <linux/delay.h>
+
+void momenco_jaguar_restart(char *command)
+{
+ /* base address of timekeeper portion of part */
+#ifdef CONFIG_MIPS64
+ void *nvram = (void*) 0xfffffffffc807000;
+#else
+ void *nvram = (void*) 0xfc807000;
+#endif
+ /* Ask the NVRAM/RTC/watchdog chip to assert reset in 1/16 second */
+ writeb(0x84, nvram + 0xff7);
+
+ /* wait for the watchdog to go off */
+ mdelay(100+(1000/16));
+
+ /* if the watchdog fails for some reason, let people know */
+ printk(KERN_NOTICE "Watchdog reset failed\n");
+}
+
+void momenco_jaguar_halt(void)
+{
+ printk(KERN_NOTICE "\n** You can safely turn off the power\n");
+ while (1)
+ __asm__(".set\tmips3\n\t"
+ "wait\n\t"
+ ".set\tmips0");
+}
+
+void momenco_jaguar_power_off(void)
+{
+ momenco_jaguar_halt();
+}
diff --git a/arch/mips/momentum/jaguar_atx/setup.c b/arch/mips/momentum/jaguar_atx/setup.c
new file mode 100644
index 000000000000..30462e715066
--- /dev/null
+++ b/arch/mips/momentum/jaguar_atx/setup.c
@@ -0,0 +1,474 @@
+/*
+ * BRIEF MODULE DESCRIPTION
+ * Momentum Computer Jaguar-ATX board dependent boot routines
+ *
+ * Copyright (C) 1996, 1997, 2001, 2004 Ralf Baechle (ralf@linux-mips.org)
+ * Copyright (C) 2000 RidgeRun, Inc.
+ * Copyright (C) 2001 Red Hat, Inc.
+ * Copyright (C) 2002 Momentum Computer
+ *
+ * Author: Matthew Dharm, Momentum Computer
+ * mdharm@momenco.com
+ *
+ * Louis Hamilton, Red Hat, Inc.
+ * hamilton@redhat.com [MIPS64 modifications]
+ *
+ * Author: RidgeRun, Inc.
+ * glonnon@ridgerun.com, skranz@ridgerun.com, stevej@ridgerun.com
+ *
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: jsun@mvista.com or jsun@junsun.net
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <linux/config.h>
+#include <linux/bcd.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <linux/bootmem.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/swap.h>
+#include <linux/ioport.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/timex.h>
+#include <linux/vmalloc.h>
+#include <asm/time.h>
+#include <asm/bootinfo.h>
+#include <asm/page.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/processor.h>
+#include <asm/ptrace.h>
+#include <asm/reboot.h>
+#include <asm/tlbflush.h>
+#include <asm/mv64340.h>
+
+#include "jaguar_atx_fpga.h"
+
+extern unsigned long mv64340_sram_base;
+unsigned long cpu_clock;
+
+/* These functions are used for rebooting or halting the machine*/
+extern void momenco_jaguar_restart(char *command);
+extern void momenco_jaguar_halt(void);
+extern void momenco_jaguar_power_off(void);
+
+void momenco_time_init(void);
+
+static char reset_reason;
+
+static inline unsigned long ENTRYLO(unsigned long paddr)
+{
+ return ((paddr & PAGE_MASK) |
+ (_PAGE_PRESENT | __READABLE | __WRITEABLE | _PAGE_GLOBAL |
+ _CACHE_UNCACHED)) >> 6;
+}
+
+void __init bus_error_init(void) { /* nothing */ }
+
+/*
+ * Load a few TLB entries for the MV64340 and perhiperals. The MV64340 is going
+ * to be hit on every IRQ anyway - there's absolutely no point in letting it be
+ * a random TLB entry, as it'll just cause needless churning of the TLB. And we
+ * use the other half for the serial port, which is just a PITA otherwise :)
+ *
+ * Device Physical Virtual
+ * MV64340 Internal Regs 0xf4000000 0xf4000000
+ * Ocelot-C[S] PLD (CS0) 0xfc000000 0xfc000000
+ * NVRAM (CS1) 0xfc800000 0xfc800000
+ * UARTs (CS2) 0xfd000000 0xfd000000
+ * Internal SRAM 0xfe000000 0xfe000000
+ * M-Systems DOC (CS3) 0xff000000 0xff000000
+ */
+
+static __init void wire_stupidity_into_tlb(void)
+{
+#ifdef CONFIG_MIPS32
+ write_c0_wired(0);
+ local_flush_tlb_all();
+
+ /* marvell and extra space */
+ add_wired_entry(ENTRYLO(0xf4000000), ENTRYLO(0xf4010000),
+ 0xf4000000UL, PM_64K);
+ /* fpga, rtc, and uart */
+ add_wired_entry(ENTRYLO(0xfc000000), ENTRYLO(0xfd000000),
+ 0xfc000000UL, PM_16M);
+// /* m-sys and internal SRAM */
+// add_wired_entry(ENTRYLO(0xfe000000), ENTRYLO(0xff000000),
+// 0xfe000000UL, PM_16M);
+
+ marvell_base = 0xf4000000;
+ //mv64340_sram_base = 0xfe000000; /* Currently unused */
+#endif
+}
+
+unsigned long marvell_base = 0xf4000000L;
+unsigned long ja_fpga_base = JAGUAR_ATX_CS0_ADDR;
+unsigned long uart_base = 0xfd000000L;
+static unsigned char *rtc_base = (unsigned char*) 0xfc800000L;
+
+EXPORT_SYMBOL(marvell_base);
+
+static __init int per_cpu_mappings(void)
+{
+ marvell_base = (unsigned long) ioremap(0xf4000000, 0x10000);
+ ja_fpga_base = (unsigned long) ioremap(JAGUAR_ATX_CS0_ADDR, 0x1000);
+ uart_base = (unsigned long) ioremap(0xfd000000UL, 0x1000);
+ rtc_base = ioremap(0xfc000000UL, 0x8000);
+ // ioremap(0xfe000000, 32 << 20);
+ write_c0_wired(0);
+ local_flush_tlb_all();
+ ja_setup_console();
+
+ return 0;
+}
+arch_initcall(per_cpu_mappings);
+
+unsigned long m48t37y_get_time(void)
+{
+ unsigned int year, month, day, hour, min, sec;
+
+ /* stop the update */
+ rtc_base[0x7ff8] = 0x40;
+
+ year = BCD2BIN(rtc_base[0x7fff]);
+ year += BCD2BIN(rtc_base[0x7ff1]) * 100;
+
+ month = BCD2BIN(rtc_base[0x7ffe]);
+
+ day = BCD2BIN(rtc_base[0x7ffd]);
+
+ hour = BCD2BIN(rtc_base[0x7ffb]);
+ min = BCD2BIN(rtc_base[0x7ffa]);
+ sec = BCD2BIN(rtc_base[0x7ff9]);
+
+ /* start the update */
+ rtc_base[0x7ff8] = 0x00;
+
+ return mktime(year, month, day, hour, min, sec);
+}
+
+int m48t37y_set_time(unsigned long sec)
+{
+ struct rtc_time tm;
+
+ /* convert to a more useful format -- note months count from 0 */
+ to_tm(sec, &tm);
+ tm.tm_mon += 1;
+
+ /* enable writing */
+ rtc_base[0x7ff8] = 0x80;
+
+ /* year */
+ rtc_base[0x7fff] = BIN2BCD(tm.tm_year % 100);
+ rtc_base[0x7ff1] = BIN2BCD(tm.tm_year / 100);
+
+ /* month */
+ rtc_base[0x7ffe] = BIN2BCD(tm.tm_mon);
+
+ /* day */
+ rtc_base[0x7ffd] = BIN2BCD(tm.tm_mday);
+
+ /* hour/min/sec */
+ rtc_base[0x7ffb] = BIN2BCD(tm.tm_hour);
+ rtc_base[0x7ffa] = BIN2BCD(tm.tm_min);
+ rtc_base[0x7ff9] = BIN2BCD(tm.tm_sec);
+
+ /* day of week -- not really used, but let's keep it up-to-date */
+ rtc_base[0x7ffc] = BIN2BCD(tm.tm_wday + 1);
+
+ /* disable writing */
+ rtc_base[0x7ff8] = 0x00;
+
+ return 0;
+}
+
+void momenco_timer_setup(struct irqaction *irq)
+{
+ setup_irq(8, irq);
+}
+
+/*
+ * Ugly but the least of all evils. TLB initialization did flush the TLB so
+ * We need to setup mappings again before we can touch the RTC.
+ */
+void momenco_time_init(void)
+{
+ wire_stupidity_into_tlb();
+
+ mips_hpt_frequency = cpu_clock / 2;
+ board_timer_setup = momenco_timer_setup;
+
+ rtc_get_time = m48t37y_get_time;
+ rtc_set_time = m48t37y_set_time;
+}
+
+static struct resource mv_pci_io_mem0_resource = {
+ .name = "MV64340 PCI0 IO MEM",
+ .flags = IORESOURCE_IO
+};
+
+static struct resource mv_pci_mem0_resource = {
+ .name = "MV64340 PCI0 MEM",
+ .flags = IORESOURCE_MEM
+};
+
+static struct mv_pci_controller mv_bus0_controller = {
+ .pcic = {
+ .pci_ops = &mv_pci_ops,
+ .mem_resource = &mv_pci_mem0_resource,
+ .io_resource = &mv_pci_io_mem0_resource,
+ },
+ .config_addr = MV64340_PCI_0_CONFIG_ADDR,
+ .config_vreg = MV64340_PCI_0_CONFIG_DATA_VIRTUAL_REG,
+};
+
+static uint32_t mv_io_base, mv_io_size;
+
+static void ja_pci0_init(void)
+{
+ uint32_t mem0_base, mem0_size;
+ uint32_t io_base, io_size;
+
+ io_base = MV_READ(MV64340_PCI_0_IO_BASE_ADDR) << 16;
+ io_size = (MV_READ(MV64340_PCI_0_IO_SIZE) + 1) << 16;
+ mem0_base = MV_READ(MV64340_PCI_0_MEMORY0_BASE_ADDR) << 16;
+ mem0_size = (MV_READ(MV64340_PCI_0_MEMORY0_SIZE) + 1) << 16;
+
+ mv_pci_io_mem0_resource.start = 0;
+ mv_pci_io_mem0_resource.end = io_size - 1;
+ mv_pci_mem0_resource.start = mem0_base;
+ mv_pci_mem0_resource.end = mem0_base + mem0_size - 1;
+ mv_bus0_controller.pcic.mem_offset = mem0_base;
+ mv_bus0_controller.pcic.io_offset = 0;
+
+ ioport_resource.end = io_size - 1;
+
+ register_pci_controller(&mv_bus0_controller.pcic);
+
+ mv_io_base = io_base;
+ mv_io_size = io_size;
+}
+
+static struct resource mv_pci_io_mem1_resource = {
+ .name = "MV64340 PCI1 IO MEM",
+ .flags = IORESOURCE_IO
+};
+
+static struct resource mv_pci_mem1_resource = {
+ .name = "MV64340 PCI1 MEM",
+ .flags = IORESOURCE_MEM
+};
+
+static struct mv_pci_controller mv_bus1_controller = {
+ .pcic = {
+ .pci_ops = &mv_pci_ops,
+ .mem_resource = &mv_pci_mem1_resource,
+ .io_resource = &mv_pci_io_mem1_resource,
+ },
+ .config_addr = MV64340_PCI_1_CONFIG_ADDR,
+ .config_vreg = MV64340_PCI_1_CONFIG_DATA_VIRTUAL_REG,
+};
+
+static __init void ja_pci1_init(void)
+{
+ uint32_t mem0_base, mem0_size;
+ uint32_t io_base, io_size;
+
+ io_base = MV_READ(MV64340_PCI_1_IO_BASE_ADDR) << 16;
+ io_size = (MV_READ(MV64340_PCI_1_IO_SIZE) + 1) << 16;
+ mem0_base = MV_READ(MV64340_PCI_1_MEMORY0_BASE_ADDR) << 16;
+ mem0_size = (MV_READ(MV64340_PCI_1_MEMORY0_SIZE) + 1) << 16;
+
+ /*
+ * Here we assume the I/O window of second bus to be contiguous with
+ * the first. A gap is no problem but would waste address space for
+ * remapping the port space.
+ */
+ mv_pci_io_mem1_resource.start = mv_io_size;
+ mv_pci_io_mem1_resource.end = mv_io_size + io_size - 1;
+ mv_pci_mem1_resource.start = mem0_base;
+ mv_pci_mem1_resource.end = mem0_base + mem0_size - 1;
+ mv_bus1_controller.pcic.mem_offset = mem0_base;
+ mv_bus1_controller.pcic.io_offset = 0;
+
+ ioport_resource.end = io_base + io_size -mv_io_base - 1;
+
+ register_pci_controller(&mv_bus1_controller.pcic);
+
+ mv_io_size = io_base + io_size - mv_io_base;
+}
+
+static __init int __init ja_pci_init(void)
+{
+ unsigned long io_v_base;
+ uint32_t enable;
+
+ enable = ~MV_READ(MV64340_BASE_ADDR_ENABLE);
+
+ /*
+ * We require at least one enabled I/O or PCI memory window or we
+ * will ignore this PCI bus. We ignore PCI windows 1, 2 and 3.
+ */
+ if (enable & (0x01 << 9) || enable & (0x01 << 10))
+ ja_pci0_init();
+
+ if (enable & (0x01 << 14) || enable & (0x01 << 15))
+ ja_pci1_init();
+
+ if (mv_io_size) {
+ io_v_base = (unsigned long) ioremap(mv_io_base, mv_io_size);
+ if (!io_v_base)
+ panic("Could not ioremap I/O port range");
+
+ set_io_port_base(io_v_base);
+ }
+
+ return 0;
+}
+
+arch_initcall(ja_pci_init);
+
+static int __init momenco_jaguar_atx_setup(void)
+{
+ unsigned int tmpword;
+
+ board_time_init = momenco_time_init;
+
+ _machine_restart = momenco_jaguar_restart;
+ _machine_halt = momenco_jaguar_halt;
+ _machine_power_off = momenco_jaguar_power_off;
+
+ /*
+ * initrd_start = (ulong)jaguar_initrd_start;
+ * initrd_end = (ulong)jaguar_initrd_start + (ulong)jaguar_initrd_size;
+ * initrd_below_start_ok = 1;
+ */
+
+ wire_stupidity_into_tlb();
+
+ /*
+ * shut down ethernet ports, just to be sure our memory doesn't get
+ * corrupted by random ethernet traffic.
+ */
+ MV_WRITE(MV64340_ETH_TRANSMIT_QUEUE_COMMAND_REG(0), 0xff << 8);
+ MV_WRITE(MV64340_ETH_TRANSMIT_QUEUE_COMMAND_REG(1), 0xff << 8);
+ MV_WRITE(MV64340_ETH_TRANSMIT_QUEUE_COMMAND_REG(2), 0xff << 8);
+ MV_WRITE(MV64340_ETH_RECEIVE_QUEUE_COMMAND_REG(0), 0xff << 8);
+ MV_WRITE(MV64340_ETH_RECEIVE_QUEUE_COMMAND_REG(1), 0xff << 8);
+ MV_WRITE(MV64340_ETH_RECEIVE_QUEUE_COMMAND_REG(2), 0xff << 8);
+ while (MV_READ(MV64340_ETH_RECEIVE_QUEUE_COMMAND_REG(0)) & 0xff);
+ while (MV_READ(MV64340_ETH_RECEIVE_QUEUE_COMMAND_REG(1)) & 0xff);
+ while (MV_READ(MV64340_ETH_RECEIVE_QUEUE_COMMAND_REG(2)) & 0xff);
+ while (MV_READ(MV64340_ETH_TRANSMIT_QUEUE_COMMAND_REG(0)) & 0xff);
+ while (MV_READ(MV64340_ETH_TRANSMIT_QUEUE_COMMAND_REG(1)) & 0xff);
+ while (MV_READ(MV64340_ETH_TRANSMIT_QUEUE_COMMAND_REG(2)) & 0xff);
+ MV_WRITE(MV64340_ETH_PORT_SERIAL_CONTROL_REG(0),
+ MV_READ(MV64340_ETH_PORT_SERIAL_CONTROL_REG(0)) & ~1);
+ MV_WRITE(MV64340_ETH_PORT_SERIAL_CONTROL_REG(1),
+ MV_READ(MV64340_ETH_PORT_SERIAL_CONTROL_REG(1)) & ~1);
+ MV_WRITE(MV64340_ETH_PORT_SERIAL_CONTROL_REG(2),
+ MV_READ(MV64340_ETH_PORT_SERIAL_CONTROL_REG(2)) & ~1);
+
+ /* Turn off the Bit-Error LED */
+ JAGUAR_FPGA_WRITE(0x80, CLR);
+
+ tmpword = JAGUAR_FPGA_READ(BOARDREV);
+ if (tmpword < 26)
+ printk("Momentum Jaguar-ATX: Board Assembly Rev. %c\n",
+ 'A'+tmpword);
+ else
+ printk("Momentum Jaguar-ATX: Board Assembly Revision #0x%x\n",
+ tmpword);
+
+ tmpword = JAGUAR_FPGA_READ(FPGA_REV);
+ printk("FPGA Rev: %d.%d\n", tmpword>>4, tmpword&15);
+ tmpword = JAGUAR_FPGA_READ(RESET_STATUS);
+ printk("Reset reason: 0x%x\n", tmpword);
+ switch (tmpword) {
+ case 0x1:
+ printk(" - Power-up reset\n");
+ break;
+ case 0x2:
+ printk(" - Push-button reset\n");
+ break;
+ case 0x8:
+ printk(" - Watchdog reset\n");
+ break;
+ case 0x10:
+ printk(" - JTAG reset\n");
+ break;
+ default:
+ printk(" - Unknown reset cause\n");
+ }
+ reset_reason = tmpword;
+ JAGUAR_FPGA_WRITE(0xff, RESET_STATUS);
+
+ tmpword = JAGUAR_FPGA_READ(BOARD_STATUS);
+ printk("Board Status register: 0x%02x\n", tmpword);
+ printk(" - User jumper: %s\n", (tmpword & 0x80)?"installed":"absent");
+ printk(" - Boot flash write jumper: %s\n", (tmpword&0x40)?"installed":"absent");
+
+ /* 256MiB of RM9000x2 DDR */
+// add_memory_region(0x0, 0x100<<20, BOOT_MEM_RAM);
+
+ /* 128MiB of MV-64340 DDR */
+// add_memory_region(0x100<<20, 0x80<<20, BOOT_MEM_RAM);
+
+ /* XXX Memory configuration should be picked up from PMON2k */
+#ifdef CONFIG_JAGUAR_DMALOW
+ printk("Jaguar ATX DMA-low mode set\n");
+ add_memory_region(0x00000000, 0x08000000, BOOT_MEM_RAM);
+ add_memory_region(0x08000000, 0x10000000, BOOT_MEM_RAM);
+#else
+ /* 128MiB of MV-64340 DDR RAM */
+ printk("Jaguar ATX DMA-low mode is not set\n");
+ add_memory_region(0x100<<20, 0x80<<20, BOOT_MEM_RAM);
+#endif
+
+#ifdef GEMDEBUG_TRACEBUFFER
+ {
+ unsigned int tbControl;
+ tbControl =
+ 0 << 26 | /* post trigger delay 0 */
+ 0x2 << 16 | /* sequential trace mode */
+ // 0x0 << 16 | /* non-sequential trace mode */
+ // 0xf << 4 | /* watchpoints disabled */
+ 2 << 2 | /* armed */
+ 2 ; /* interrupt disabled */
+ printk ("setting tbControl = %08lx\n", tbControl);
+ write_32bit_cp0_set1_register($22, tbControl);
+ __asm__ __volatile__(".set noreorder\n\t" \
+ "nop; nop; nop; nop; nop; nop;\n\t" \
+ "nop; nop; nop; nop; nop; nop;\n\t" \
+ ".set reorder\n\t");
+
+ }
+#endif
+
+ return 0;
+}
+
+early_initcall(momenco_jaguar_atx_setup);
diff --git a/arch/mips/momentum/ocelot_3/Makefile b/arch/mips/momentum/ocelot_3/Makefile
new file mode 100644
index 000000000000..aab8fd89f830
--- /dev/null
+++ b/arch/mips/momentum/ocelot_3/Makefile
@@ -0,0 +1,8 @@
+#
+# Makefile for Momentum Computer's Ocelot-3 board.
+#
+# Note! Dependencies are done automagically by 'make dep', which also
+# removes any old dependencies. DON'T put your own dependencies here
+# unless it's something special (ie not a .c file).
+#
+obj-y += int-handler.o irq.o prom.o reset.o setup.o
diff --git a/arch/mips/momentum/ocelot_3/int-handler.S b/arch/mips/momentum/ocelot_3/int-handler.S
new file mode 100644
index 000000000000..4522f09ed769
--- /dev/null
+++ b/arch/mips/momentum/ocelot_3/int-handler.S
@@ -0,0 +1,137 @@
+/*
+ * Copyright 2002 Momentum Computer Inc.
+ * Author: Matthew Dharm <mdharm@momenco.com>
+ *
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: jsun@mvista.com or jsun@junsun.net
+ *
+ * Copyright 2004 PMC-Sierra
+ * Author: Manish Lachwani (lachwani@pmc-sierra.com)
+ *
+ * Copyright (C) 2004 MontaVista Software Inc.
+ * Author: Manish Lachwani, mlachwani@mvista.com
+ *
+ * First-level interrupt dispatcher for Ocelot-3 board.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#include <asm/asm.h>
+#include <asm/mipsregs.h>
+#include <asm/addrspace.h>
+#include <asm/regdef.h>
+#include <asm/stackframe.h>
+
+/*
+ * First level interrupt dispatcher for Ocelot-3 board
+ */
+ .align 5
+ NESTED(ocelot3_handle_int, PT_SIZE, sp)
+ SAVE_ALL
+ CLI
+ .set at
+
+ mfc0 t0, CP0_CAUSE
+ mfc0 t2, CP0_STATUS
+
+ and t0, t2
+
+ andi t1, t0, STATUSF_IP0 /* sw0 software interrupt (IRQ0) */
+ bnez t1, ll_sw0_irq
+
+ andi t1, t0, STATUSF_IP1 /* sw1 software interrupt (IRQ1) */
+ bnez t1, ll_sw1_irq
+
+ andi t1, t0, STATUSF_IP2 /* int0 hardware line (IRQ2) */
+ bnez t1, ll_pci0slot1_irq
+
+ andi t1, t0, STATUSF_IP3 /* int1 hardware line (IRQ3) */
+ bnez t1, ll_pci0slot2_irq
+
+ andi t1, t0, STATUSF_IP4 /* int2 hardware line (IRQ4) */
+ bnez t1, ll_pci1slot1_irq
+
+ andi t1, t0, STATUSF_IP5 /* int3 hardware line (IRQ5) */
+ bnez t1, ll_pci1slot2_irq
+
+ andi t1, t0, STATUSF_IP6 /* int4 hardware line (IRQ6) */
+ bnez t1, ll_uart_irq
+
+ andi t1, t0, STATUSF_IP7 /* cpu timer (IRQ7) */
+ bnez t1, ll_cputimer_irq
+
+ /* now look at extended interrupts */
+ mfc0 t0, CP0_CAUSE
+ cfc0 t1, CP0_S1_INTCONTROL
+
+ /* shift the mask 8 bits left to line up the bits */
+ sll t2, t1, 8
+
+ and t0, t2
+ srl t0, t0, 16
+
+ andi t1, t0, STATUSF_IP8 /* int6 hardware line (IRQ9) */
+ bnez t1, ll_mv64340_decode_irq
+
+ .set reorder
+
+ /* wrong alarm or masked ... */
+ j spurious_interrupt
+ nop
+ END(ocelot3_handle_int)
+
+ .align 5
+ll_sw0_irq:
+ li a0, 0 /* IRQ 1 */
+ move a1, sp
+ jal do_IRQ
+ j ret_from_irq
+ll_sw1_irq:
+ li a0, 1 /* IRQ 2 */
+ move a1, sp
+ jal do_IRQ
+ j ret_from_irq
+
+ll_pci0slot1_irq:
+ li a0, 2 /* IRQ 3 */
+ move a1, sp
+ jal do_IRQ
+ j ret_from_irq
+
+ll_pci0slot2_irq:
+ li a0, 3 /* IRQ 4 */
+ move a1, sp
+ jal do_IRQ
+ j ret_from_irq
+
+ll_pci1slot1_irq:
+ li a0, 4 /* IRQ 5 */
+ move a1, sp
+ jal do_IRQ
+ j ret_from_irq
+
+ll_pci1slot2_irq:
+ li a0, 5 /* IRQ 6 */
+ move a1, sp
+ jal do_IRQ
+ j ret_from_irq
+
+ll_uart_irq:
+ li a0, 6 /* IRQ 7 */
+ move a1, sp
+ jal do_IRQ
+ j ret_from_irq
+
+ll_cputimer_irq:
+ li a0, 7 /* IRQ 8 */
+ move a1, sp
+ jal do_IRQ
+ j ret_from_irq
+
+ll_mv64340_decode_irq:
+ move a0, sp
+ jal ll_mv64340_irq
+ j ret_from_irq
+
diff --git a/arch/mips/momentum/ocelot_3/irq.c b/arch/mips/momentum/ocelot_3/irq.c
new file mode 100644
index 000000000000..42464dbd4ad2
--- /dev/null
+++ b/arch/mips/momentum/ocelot_3/irq.c
@@ -0,0 +1,81 @@
+/*
+ * Copyright (C) 2000 RidgeRun, Inc.
+ * Author: RidgeRun, Inc.
+ * glonnon@ridgerun.com, skranz@ridgerun.com, stevej@ridgerun.com
+ *
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
+ * Copyright (C) 2000, 2001 Ralf Baechle (ralf@gnu.org)
+ *
+ * Copyright 2004 PMC-Sierra
+ * Author: Manish Lachwani (lachwani@pmc-sierra.com)
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Copyright (C) 2004 MontaVista Software Inc.
+ * Author: Manish Lachwani, mlachwani@mvista.com
+ *
+ */
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/kernel_stat.h>
+#include <linux/module.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/timex.h>
+#include <linux/slab.h>
+#include <linux/random.h>
+#include <asm/bitops.h>
+#include <asm/bootinfo.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/mipsregs.h>
+#include <asm/system.h>
+
+extern asmlinkage void ocelot3_handle_int(void);
+
+static struct irqaction cascade_mv64340 = {
+ no_action, SA_INTERRUPT, CPU_MASK_NONE, "MV64340-Cascade", NULL, NULL
+};
+
+void __init arch_init_irq(void)
+{
+ /*
+ * Clear all of the interrupts while we change the able around a bit.
+ * int-handler is not on bootstrap
+ */
+ clear_c0_status(ST0_IM | ST0_BEV);
+
+ /* Sets the first-level interrupt dispatcher. */
+ set_except_vector(0, ocelot3_handle_int);
+ mips_cpu_irq_init(0);
+ rm7k_cpu_irq_init(8);
+
+ /* set up the cascading interrupts */
+ setup_irq(8, &cascade_mv64340); /* unmask intControl IM8, IRQ 9 */
+ mv64340_irq_init(16);
+
+ set_c0_status(ST0_IM); /* IE in the status register */
+
+}
diff --git a/arch/mips/momentum/ocelot_3/ocelot_3_fpga.h b/arch/mips/momentum/ocelot_3/ocelot_3_fpga.h
new file mode 100644
index 000000000000..227e429fe720
--- /dev/null
+++ b/arch/mips/momentum/ocelot_3/ocelot_3_fpga.h
@@ -0,0 +1,57 @@
+/*
+ * Ocelot-3 Board Register Definitions
+ *
+ * (C) 2002 Momentum Computer Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Louis Hamilton, Red Hat, Inc.
+ * hamilton@redhat.com [MIPS64 modifications]
+ *
+ * Copyright (C) 2004 MontaVista Software Inc.
+ * Author: Manish Lachwani, mlachwani@mvista.com
+ */
+
+#ifndef __OCELOT_3_FPGA_H__
+#define __OCELOT_3_FPGA_H__
+
+#define OCELOT_3_REG_BOARDREV 0x0
+#define OCELOT_3_REG_FPGA_REV 0x1
+#define OCELOT_3_REG_FPGA_TYPE 0x2
+#define OCELOT_3_REG_RESET_STATUS 0x3
+#define OCELOT_3_REG_BOARD_STATUS 0x4
+#define OCELOT_3_REG_CPCI_ID 0x5
+#define OCELOT_3_REG_SET 0x6
+#define OCELOT_3_REG_CLR 0x7
+#define OCELOT_3_REG_EEPROM_MODE 0x9
+#define OCELOT_3_REG_INTMASK 0xa
+#define OCELOT_3_REG_INTSTAT 0xb
+#define OCELOT_3_REG_UART_INTMASK 0xc
+#define OCELOT_3_REG_UART_INTSTAT 0xd
+#define OCELOT_3_REG_INTSET 0xe
+#define OCELOT_3_REG_INTCLR 0xf
+
+extern unsigned long ocelot_fpga_base;
+
+#define OCELOT_FPGA_WRITE(x, y) writeb(x, ocelot_fpga_base + OCELOT_3_REG_##y)
+#define OCELOT_FPGA_READ(x) readb(ocelot_fpga_base + OCELOT_3_REG_##x)
+
+#endif
diff --git a/arch/mips/momentum/ocelot_3/prom.c b/arch/mips/momentum/ocelot_3/prom.c
new file mode 100644
index 000000000000..89c17a0c0bed
--- /dev/null
+++ b/arch/mips/momentum/ocelot_3/prom.c
@@ -0,0 +1,248 @@
+/*
+ * Copyright 2002 Momentum Computer Inc.
+ * Author: Matthew Dharm <mdharm@momenco.com>
+ *
+ * Louis Hamilton, Red Hat, Inc.
+ * hamilton@redhat.com [MIPS64 modifications]
+ *
+ * Copyright 2004 PMC-Sierra
+ * Author: Manish Lachwani (lachwani@pmc-sierra.com)
+ *
+ * Based on Ocelot Linux port, which is
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: jsun@mvista.com or jsun@junsun.net
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * Copyright (C) 2004 MontaVista Software Inc.
+ * Author: Manish Lachwani, mlachwani@mvista.com
+ *
+ */
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/bootmem.h>
+#include <linux/mv643xx.h>
+
+#include <asm/addrspace.h>
+#include <asm/bootinfo.h>
+#include <asm/pmon.h>
+#include "ocelot_3_fpga.h"
+
+struct callvectors* debug_vectors;
+extern unsigned long marvell_base;
+extern unsigned long cpu_clock;
+
+#ifdef CONFIG_MV643XX_ETH
+extern unsigned char prom_mac_addr_base[6];
+#endif
+
+const char *get_system_type(void)
+{
+ return "Momentum Ocelot-3";
+}
+
+#ifdef CONFIG_MV643XX_ETH
+void burn_clocks(void)
+{
+ int i;
+
+ /* this loop should burn at least 1us -- this should be plenty */
+ for (i = 0; i < 0x10000; i++)
+ ;
+}
+
+u8 exchange_bit(u8 val, u8 cs)
+{
+ /* place the data */
+ OCELOT_FPGA_WRITE((val << 2) | cs, EEPROM_MODE);
+ burn_clocks();
+
+ /* turn the clock on */
+ OCELOT_FPGA_WRITE((val << 2) | cs | 0x2, EEPROM_MODE);
+ burn_clocks();
+
+ /* turn the clock off and read-strobe */
+ OCELOT_FPGA_WRITE((val << 2) | cs | 0x10, EEPROM_MODE);
+
+ /* return the data */
+ return ((OCELOT_FPGA_READ(EEPROM_MODE) >> 3) & 0x1);
+}
+
+void get_mac(char dest[6])
+{
+ u8 read_opcode[12] = {1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
+ int i,j;
+
+ for (i = 0; i < 12; i++)
+ exchange_bit(read_opcode[i], 1);
+
+ for (j = 0; j < 6; j++) {
+ dest[j] = 0;
+ for (i = 0; i < 8; i++) {
+ dest[j] <<= 1;
+ dest[j] |= exchange_bit(0, 1);
+ }
+ }
+
+ /* turn off CS */
+ exchange_bit(0,0);
+}
+#endif
+
+
+#ifdef CONFIG_MIPS64
+
+unsigned long signext(unsigned long addr)
+{
+ addr &= 0xffffffff;
+ return (unsigned long)((int)addr);
+}
+
+void *get_arg(unsigned long args, int arc)
+{
+ unsigned long ul;
+ unsigned char *puc, uc;
+
+ args += (arc * 4);
+ ul = (unsigned long)signext(args);
+ puc = (unsigned char *)ul;
+ if (puc == 0)
+ return (void *)0;
+
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
+ uc = *puc++;
+ ul = (unsigned long)uc;
+ uc = *puc++;
+ ul |= (((unsigned long)uc) << 8);
+ uc = *puc++;
+ ul |= (((unsigned long)uc) << 16);
+ uc = *puc++;
+ ul |= (((unsigned long)uc) << 24);
+#else /* CONFIG_CPU_LITTLE_ENDIAN */
+ uc = *puc++;
+ ul = ((unsigned long)uc) << 24;
+ uc = *puc++;
+ ul |= (((unsigned long)uc) << 16);
+ uc = *puc++;
+ ul |= (((unsigned long)uc) << 8);
+ uc = *puc++;
+ ul |= ((unsigned long)uc);
+#endif /* CONFIG_CPU_LITTLE_ENDIAN */
+ ul = signext(ul);
+ return (void *)ul;
+}
+
+char *arg64(unsigned long addrin, int arg_index)
+{
+ unsigned long args;
+ char *p;
+
+ args = signext(addrin);
+ p = (char *)get_arg(args, arg_index);
+
+ return p;
+}
+#endif /* CONFIG_MIPS64 */
+
+void __init prom_init(void)
+{
+ int argc = fw_arg0;
+ char **arg = (char **) fw_arg1;
+ char **env = (char **) fw_arg2;
+ struct callvectors *cv = (struct callvectors *) fw_arg3;
+ int i;
+
+#ifdef CONFIG_MIPS64
+ char *ptr;
+ printk("prom_init - MIPS64\n");
+
+ /* save the PROM vectors for debugging use */
+ debug_vectors = (struct callvectors *)signext((unsigned long)cv);
+
+ /* arg[0] is "g", the rest is boot parameters */
+ arcs_cmdline[0] = '\0';
+
+ for (i = 1; i < argc; i++) {
+ ptr = (char *)arg64((unsigned long)arg, i);
+ if ((strlen(arcs_cmdline) + strlen(ptr) + 1) >=
+ sizeof(arcs_cmdline))
+ break;
+ strcat(arcs_cmdline, ptr);
+ strcat(arcs_cmdline, " ");
+ }
+ i = 0;
+
+ while (1) {
+ ptr = (char *)arg64((unsigned long)env, i);
+ if (! ptr)
+ break;
+
+ if (strncmp("gtbase", ptr, strlen("gtbase")) == 0) {
+ marvell_base = simple_strtol(ptr + strlen("gtbase="),
+ NULL, 16);
+
+ if ((marvell_base & 0xffffffff00000000) == 0)
+ marvell_base |= 0xffffffff00000000;
+
+ printk("marvell_base set to 0x%016lx\n", marvell_base);
+ }
+ if (strncmp("cpuclock", ptr, strlen("cpuclock")) == 0) {
+ cpu_clock = simple_strtol(ptr + strlen("cpuclock="),
+ NULL, 10);
+ printk("cpu_clock set to %d\n", cpu_clock);
+ }
+ i++;
+ }
+ printk("arcs_cmdline: %s\n", arcs_cmdline);
+
+#else /* CONFIG_MIPS64 */
+
+ /* save the PROM vectors for debugging use */
+ debug_vectors = cv;
+
+ /* arg[0] is "g", the rest is boot parameters */
+ arcs_cmdline[0] = '\0';
+ for (i = 1; i < argc; i++) {
+ if (strlen(arcs_cmdline) + strlen(arg[i] + 1)
+ >= sizeof(arcs_cmdline))
+ break;
+ strcat(arcs_cmdline, arg[i]);
+ strcat(arcs_cmdline, " ");
+ }
+
+ while (*env) {
+ if (strncmp("gtbase", *env, strlen("gtbase")) == 0) {
+ marvell_base = simple_strtol(*env + strlen("gtbase="),
+ NULL, 16);
+ }
+ if (strncmp("cpuclock", *env, strlen("cpuclock")) == 0) {
+ cpu_clock = simple_strtol(*env + strlen("cpuclock="),
+ NULL, 10);
+ }
+ env++;
+ }
+#endif /* CONFIG_MIPS64 */
+
+ mips_machgroup = MACH_GROUP_MOMENCO;
+ mips_machtype = MACH_MOMENCO_OCELOT_3;
+
+#ifdef CONFIG_MV643XX_ETH
+ /* get the base MAC address for on-board ethernet ports */
+ get_mac(prom_mac_addr_base);
+#endif
+
+#ifndef CONFIG_MIPS64
+ debug_vectors->printf("Booting Linux kernel...\n");
+#endif
+}
+
+void __init prom_free_prom_memory(void)
+{
+}
+
+void __init prom_fixup_mem_map(unsigned long start, unsigned long end)
+{
+}
diff --git a/arch/mips/momentum/ocelot_3/reset.c b/arch/mips/momentum/ocelot_3/reset.c
new file mode 100644
index 000000000000..72b4423c0864
--- /dev/null
+++ b/arch/mips/momentum/ocelot_3/reset.c
@@ -0,0 +1,59 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * Copyright (C) 1997, 01, 05 Ralf Baechle
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: jsun@mvista.com or jsun@junsun.net
+ *
+ * Copyright (C) 2002 Momentum Computer Inc.
+ * Author: Matthew Dharm <mdharm@momenco.com>
+ *
+ * Louis Hamilton, Red Hat, Inc.
+ * hamilton@redhat.com [MIPS64 modifications]
+ *
+ * Copyright 2004 PMC-Sierra
+ * Author: Manish Lachwani (lachwani@pmc-sierra.com)
+ *
+ * Copyright (C) 2004 MontaVista Software Inc.
+ * Author: Manish Lachwani, mlachwani@mvista.com
+ */
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/delay.h>
+#include <asm/io.h>
+#include <asm/pgtable.h>
+#include <asm/processor.h>
+#include <asm/reboot.h>
+#include <asm/system.h>
+
+void momenco_ocelot_restart(char *command)
+{
+ /* base address of timekeeper portion of part */
+ void *nvram = (void *) 0xfc807000L;
+
+ /* Ask the NVRAM/RTC/watchdog chip to assert reset in 1/16 second */
+ writeb(0x84, nvram + 0xff7);
+
+ /* wait for the watchdog to go off */
+ mdelay(100+(1000/16));
+
+ /* if the watchdog fails for some reason, let people know */
+ printk(KERN_NOTICE "Watchdog reset failed\n");
+}
+
+void momenco_ocelot_halt(void)
+{
+ printk(KERN_NOTICE "\n** You can safely turn off the power\n");
+ while (1)
+ __asm__(".set\tmips3\n\t"
+ "wait\n\t"
+ ".set\tmips0");
+}
+
+void momenco_ocelot_power_off(void)
+{
+ momenco_ocelot_halt();
+}
diff --git a/arch/mips/momentum/ocelot_3/setup.c b/arch/mips/momentum/ocelot_3/setup.c
new file mode 100644
index 000000000000..ce2efcbab7aa
--- /dev/null
+++ b/arch/mips/momentum/ocelot_3/setup.c
@@ -0,0 +1,398 @@
+/*
+ * setup.c
+ *
+ * BRIEF MODULE DESCRIPTION
+ * Momentum Computer Ocelot-3 board dependent boot routines
+ *
+ * Copyright (C) 1996, 1997, 01, 05 Ralf Baechle
+ * Copyright (C) 2000 RidgeRun, Inc.
+ * Copyright (C) 2001 Red Hat, Inc.
+ * Copyright (C) 2002 Momentum Computer
+ *
+ * Author: Matthew Dharm, Momentum Computer
+ * mdharm@momenco.com
+ *
+ * Louis Hamilton, Red Hat, Inc.
+ * hamilton@redhat.com [MIPS64 modifications]
+ *
+ * Author: RidgeRun, Inc.
+ * glonnon@ridgerun.com, skranz@ridgerun.com, stevej@ridgerun.com
+ *
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: jsun@mvista.com or jsun@junsun.net
+ *
+ * Copyright 2004 PMC-Sierra
+ * Author: Manish Lachwani (lachwani@pmc-sierra.com)
+ *
+ * Copyright (C) 2004 MontaVista Software Inc.
+ * Author: Manish Lachwani, mlachwani@mvista.com
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/mc146818rtc.h>
+#include <linux/ioport.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/timex.h>
+#include <linux/bootmem.h>
+#include <linux/mv643xx.h>
+#include <asm/time.h>
+#include <asm/page.h>
+#include <asm/bootinfo.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/pci.h>
+#include <asm/processor.h>
+#include <asm/ptrace.h>
+#include <asm/reboot.h>
+#include <asm/mc146818rtc.h>
+#include <asm/tlbflush.h>
+#include "ocelot_3_fpga.h"
+
+/* Marvell Discovery Register Base */
+unsigned long marvell_base = (signed)0xf4000000;
+
+/* CPU clock */
+unsigned long cpu_clock;
+
+/* RTC/NVRAM */
+unsigned char* rtc_base = (unsigned char*)(signed)0xfc800000;
+
+/* FPGA Base */
+unsigned long ocelot_fpga_base = (signed)0xfc000000;
+
+/* Serial base */
+unsigned long uart_base = (signed)0xfd000000;
+
+/*
+ * Marvell Discovery SRAM. This is one place where Ethernet
+ * Tx and Rx descriptors can be placed to improve performance
+ */
+extern unsigned long mv64340_sram_base;
+
+/* These functions are used for rebooting or halting the machine*/
+extern void momenco_ocelot_restart(char *command);
+extern void momenco_ocelot_halt(void);
+extern void momenco_ocelot_power_off(void);
+
+void momenco_time_init(void);
+static char reset_reason;
+
+void add_wired_entry(unsigned long entrylo0, unsigned long entrylo1,
+ unsigned long entryhi, unsigned long pagemask);
+
+static inline unsigned long ENTRYLO(unsigned long paddr)
+{
+ return ((paddr & PAGE_MASK) |
+ (_PAGE_PRESENT | __READABLE | __WRITEABLE | _PAGE_GLOBAL |
+ _CACHE_UNCACHED)) >> 6;
+}
+
+void __init bus_error_init(void)
+{
+ /* nothing */
+}
+
+/*
+ * setup code for a handoff from a version 2 PMON 2000 PROM
+ */
+void setup_wired_tlb_entries(void)
+{
+ write_c0_wired(0);
+ local_flush_tlb_all();
+
+ /* marvell and extra space */
+ add_wired_entry(ENTRYLO(0xf4000000), ENTRYLO(0xf4010000), (signed)0xf4000000, PM_64K);
+
+ /* fpga, rtc, and uart */
+ add_wired_entry(ENTRYLO(0xfc000000), ENTRYLO(0xfd000000), (signed)0xfc000000, PM_16M);
+}
+
+#define CONV_BCD_TO_BIN(val) (((val) & 0xf) + (((val) >> 4) * 10))
+#define CONV_BIN_TO_BCD(val) (((val) % 10) + (((val) / 10) << 4))
+
+unsigned long m48t37y_get_time(void)
+{
+ unsigned int year, month, day, hour, min, sec;
+
+ /* stop the update */
+ rtc_base[0x7ff8] = 0x40;
+
+ year = CONV_BCD_TO_BIN(rtc_base[0x7fff]);
+ year += CONV_BCD_TO_BIN(rtc_base[0x7ff1]) * 100;
+
+ month = CONV_BCD_TO_BIN(rtc_base[0x7ffe]);
+
+ day = CONV_BCD_TO_BIN(rtc_base[0x7ffd]);
+
+ hour = CONV_BCD_TO_BIN(rtc_base[0x7ffb]);
+ min = CONV_BCD_TO_BIN(rtc_base[0x7ffa]);
+ sec = CONV_BCD_TO_BIN(rtc_base[0x7ff9]);
+
+ /* start the update */
+ rtc_base[0x7ff8] = 0x00;
+
+ return mktime(year, month, day, hour, min, sec);
+}
+
+int m48t37y_set_time(unsigned long sec)
+{
+ struct rtc_time tm;
+
+ /* convert to a more useful format -- note months count from 0 */
+ to_tm(sec, &tm);
+ tm.tm_mon += 1;
+
+ /* enable writing */
+ rtc_base[0x7ff8] = 0x80;
+
+ /* year */
+ rtc_base[0x7fff] = CONV_BIN_TO_BCD(tm.tm_year % 100);
+ rtc_base[0x7ff1] = CONV_BIN_TO_BCD(tm.tm_year / 100);
+
+ /* month */
+ rtc_base[0x7ffe] = CONV_BIN_TO_BCD(tm.tm_mon);
+
+ /* day */
+ rtc_base[0x7ffd] = CONV_BIN_TO_BCD(tm.tm_mday);
+
+ /* hour/min/sec */
+ rtc_base[0x7ffb] = CONV_BIN_TO_BCD(tm.tm_hour);
+ rtc_base[0x7ffa] = CONV_BIN_TO_BCD(tm.tm_min);
+ rtc_base[0x7ff9] = CONV_BIN_TO_BCD(tm.tm_sec);
+
+ /* day of week -- not really used, but let's keep it up-to-date */
+ rtc_base[0x7ffc] = CONV_BIN_TO_BCD(tm.tm_wday + 1);
+
+ /* disable writing */
+ rtc_base[0x7ff8] = 0x00;
+
+ return 0;
+}
+
+void momenco_timer_setup(struct irqaction *irq)
+{
+ setup_irq(7, irq); /* Timer interrupt, unmask status IM7 */
+}
+
+void momenco_time_init(void)
+{
+ setup_wired_tlb_entries();
+
+ /*
+ * Ocelot-3 board has been built with both
+ * the Rm7900 and the Rm7065C
+ */
+ mips_hpt_frequency = cpu_clock / 2;
+ board_timer_setup = momenco_timer_setup;
+
+ rtc_get_time = m48t37y_get_time;
+ rtc_set_time = m48t37y_set_time;
+}
+
+/*
+ * PCI Support for Ocelot-3
+ */
+
+/* Bus #0 IO and MEM space */
+#define OCELOT_3_PCI_IO_0_START 0xe0000000
+#define OCELOT_3_PCI_IO_0_SIZE 0x08000000
+#define OCELOT_3_PCI_MEM_0_START 0xc0000000
+#define OCELOT_3_PCI_MEM_0_SIZE 0x10000000
+
+/* Bus #1 IO and MEM space */
+#define OCELOT_3_PCI_IO_1_START 0xe8000000
+#define OCELOT_3_PCI_IO_1_SIZE 0x08000000
+#define OCELOT_3_PCI_MEM_1_START 0xd0000000
+#define OCELOT_3_PCI_MEM_1_SIZE 0x10000000
+
+static struct resource mv_pci_io_mem0_resource = {
+ .name = "MV64340 PCI0 IO MEM",
+ .start = OCELOT_3_PCI_IO_0_START,
+ .end = OCELOT_3_PCI_IO_0_START + OCELOT_3_PCI_IO_0_SIZE - 1,
+ .flags = IORESOURCE_IO,
+};
+
+static struct resource mv_pci_io_mem1_resource = {
+ .name = "MV64340 PCI1 IO MEM",
+ .start = OCELOT_3_PCI_IO_1_START,
+ .end = OCELOT_3_PCI_IO_1_START + OCELOT_3_PCI_IO_1_SIZE - 1,
+ .flags = IORESOURCE_IO,
+};
+
+static struct resource mv_pci_mem0_resource = {
+ .name = "MV64340 PCI0 MEM",
+ .start = OCELOT_3_PCI_MEM_0_START,
+ .end = OCELOT_3_PCI_MEM_0_START + OCELOT_3_PCI_MEM_0_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct resource mv_pci_mem1_resource = {
+ .name = "MV64340 PCI1 MEM",
+ .start = OCELOT_3_PCI_MEM_1_START,
+ .end = OCELOT_3_PCI_MEM_1_START + OCELOT_3_PCI_MEM_1_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct mv_pci_controller mv_bus0_controller = {
+ .pcic = {
+ .pci_ops = &mv_pci_ops,
+ .mem_resource = &mv_pci_mem0_resource,
+ .io_resource = &mv_pci_io_mem0_resource,
+ },
+ .config_addr = MV64340_PCI_0_CONFIG_ADDR,
+ .config_vreg = MV64340_PCI_0_CONFIG_DATA_VIRTUAL_REG,
+};
+
+static struct mv_pci_controller mv_bus1_controller = {
+ .pcic = {
+ .pci_ops = &mv_pci_ops,
+ .mem_resource = &mv_pci_mem1_resource,
+ .io_resource = &mv_pci_io_mem1_resource,
+ },
+ .config_addr = MV64340_PCI_1_CONFIG_ADDR,
+ .config_vreg = MV64340_PCI_1_CONFIG_DATA_VIRTUAL_REG,
+};
+
+static __init int __init ja_pci_init(void)
+{
+ uint32_t enable;
+ extern int pci_probe_only;
+
+ /* PMON will assign PCI resources */
+ pci_probe_only = 1;
+
+ enable = ~MV_READ(MV64340_BASE_ADDR_ENABLE);
+ /*
+ * We require at least one enabled I/O or PCI memory window or we
+ * will ignore this PCI bus. We ignore PCI windows 1, 2 and 3.
+ */
+ if (enable & (0x01 << 9) || enable & (0x01 << 10))
+ register_pci_controller(&mv_bus0_controller.pcic);
+
+ if (enable & (0x01 << 14) || enable & (0x01 << 15))
+ register_pci_controller(&mv_bus1_controller.pcic);
+
+ ioport_resource.end = OCELOT_3_PCI_IO_0_START + OCELOT_3_PCI_IO_0_SIZE +
+ OCELOT_3_PCI_IO_1_SIZE - 1;
+
+ iomem_resource.end = OCELOT_3_PCI_MEM_0_START + OCELOT_3_PCI_MEM_0_SIZE +
+ OCELOT_3_PCI_MEM_1_SIZE - 1;
+
+ set_io_port_base(OCELOT_3_PCI_IO_0_START); /* mips_io_port_base */
+
+ return 0;
+}
+
+arch_initcall(ja_pci_init);
+
+static int __init momenco_ocelot_3_setup(void)
+{
+ unsigned int tmpword;
+
+ board_time_init = momenco_time_init;
+
+ _machine_restart = momenco_ocelot_restart;
+ _machine_halt = momenco_ocelot_halt;
+ _machine_power_off = momenco_ocelot_power_off;
+
+ /* Wired TLB entries */
+ setup_wired_tlb_entries();
+
+ /* shut down ethernet ports, just to be sure our memory doesn't get
+ * corrupted by random ethernet traffic.
+ */
+ MV_WRITE(MV64340_ETH_TRANSMIT_QUEUE_COMMAND_REG(0), 0xff << 8);
+ MV_WRITE(MV64340_ETH_TRANSMIT_QUEUE_COMMAND_REG(1), 0xff << 8);
+ MV_WRITE(MV64340_ETH_RECEIVE_QUEUE_COMMAND_REG(0), 0xff << 8);
+ MV_WRITE(MV64340_ETH_RECEIVE_QUEUE_COMMAND_REG(1), 0xff << 8);
+ do {}
+ while (MV_READ(MV64340_ETH_RECEIVE_QUEUE_COMMAND_REG(0)) & 0xff);
+ do {}
+ while (MV_READ(MV64340_ETH_RECEIVE_QUEUE_COMMAND_REG(1)) & 0xff);
+ do {}
+ while (MV_READ(MV64340_ETH_TRANSMIT_QUEUE_COMMAND_REG(0)) & 0xff);
+ do {}
+ while (MV_READ(MV64340_ETH_TRANSMIT_QUEUE_COMMAND_REG(1)) & 0xff);
+ MV_WRITE(MV64340_ETH_PORT_SERIAL_CONTROL_REG(0),
+ MV_READ(MV64340_ETH_PORT_SERIAL_CONTROL_REG(0)) & ~1);
+ MV_WRITE(MV64340_ETH_PORT_SERIAL_CONTROL_REG(1),
+ MV_READ(MV64340_ETH_PORT_SERIAL_CONTROL_REG(1)) & ~1);
+
+ /* Turn off the Bit-Error LED */
+ OCELOT_FPGA_WRITE(0x80, CLR);
+
+ tmpword = OCELOT_FPGA_READ(BOARDREV);
+ if (tmpword < 26)
+ printk("Momenco Ocelot-3: Board Assembly Rev. %c\n",
+ 'A'+tmpword);
+ else
+ printk("Momenco Ocelot-3: Board Assembly Revision #0x%x\n",
+ tmpword);
+
+ tmpword = OCELOT_FPGA_READ(FPGA_REV);
+ printk("FPGA Rev: %d.%d\n", tmpword>>4, tmpword&15);
+ tmpword = OCELOT_FPGA_READ(RESET_STATUS);
+ printk("Reset reason: 0x%x\n", tmpword);
+ switch (tmpword) {
+ case 0x1:
+ printk(" - Power-up reset\n");
+ break;
+ case 0x2:
+ printk(" - Push-button reset\n");
+ break;
+ case 0x4:
+ printk(" - cPCI bus reset\n");
+ break;
+ case 0x8:
+ printk(" - Watchdog reset\n");
+ break;
+ case 0x10:
+ printk(" - Software reset\n");
+ break;
+ default:
+ printk(" - Unknown reset cause\n");
+ }
+ reset_reason = tmpword;
+ OCELOT_FPGA_WRITE(0xff, RESET_STATUS);
+
+ tmpword = OCELOT_FPGA_READ(CPCI_ID);
+ printk("cPCI ID register: 0x%02x\n", tmpword);
+ printk(" - Slot number: %d\n", tmpword & 0x1f);
+ printk(" - PCI bus present: %s\n", tmpword & 0x40 ? "yes" : "no");
+ printk(" - System Slot: %s\n", tmpword & 0x20 ? "yes" : "no");
+
+ tmpword = OCELOT_FPGA_READ(BOARD_STATUS);
+ printk("Board Status register: 0x%02x\n", tmpword);
+ printk(" - User jumper: %s\n", (tmpword & 0x80)?"installed":"absent");
+ printk(" - Boot flash write jumper: %s\n", (tmpword&0x40)?"installed":"absent");
+ printk(" - L3 cache size: %d MB\n", (1<<((tmpword&12) >> 2))&~1);
+
+ /* Support for 128 MB memory */
+ add_memory_region(0x0, 0x08000000, BOOT_MEM_RAM);
+
+ return 0;
+}
+
+early_initcall(momenco_ocelot_3_setup);
diff --git a/arch/mips/momentum/ocelot_c/Makefile b/arch/mips/momentum/ocelot_c/Makefile
new file mode 100644
index 000000000000..91240777f978
--- /dev/null
+++ b/arch/mips/momentum/ocelot_c/Makefile
@@ -0,0 +1,8 @@
+#
+# Makefile for Momentum Computer's Ocelot-C and -CS boards.
+#
+
+obj-y += cpci-irq.o int-handler.o irq.o prom.o reset.o \
+ setup.o uart-irq.o
+
+obj-$(CONFIG_KGDB) += dbg_io.o
diff --git a/arch/mips/momentum/ocelot_c/cpci-irq.c b/arch/mips/momentum/ocelot_c/cpci-irq.c
new file mode 100644
index 000000000000..dea48b3ad687
--- /dev/null
+++ b/arch/mips/momentum/ocelot_c/cpci-irq.c
@@ -0,0 +1,153 @@
+/*
+ * Copyright 2002 Momentum Computer
+ * Author: mdharm@momenco.com
+ *
+ * arch/mips/momentum/ocelot_c/cpci-irq.c
+ * Interrupt routines for cpci. Interrupt numbers are assigned from
+ * CPCI_IRQ_BASE to CPCI_IRQ_BASE+8 (8 interrupt sources).
+ *
+ * Note that the high-level software will need to be careful about using
+ * these interrupts. If this board is asserting a cPCI interrupt, it will
+ * also see the asserted interrupt. Care must be taken to avoid an
+ * interrupt flood.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <asm/ptrace.h>
+#include <linux/sched.h>
+#include <linux/kernel_stat.h>
+#include <asm/io.h>
+#include "ocelot_c_fpga.h"
+
+#define CPCI_IRQ_BASE 8
+
+static inline int ls1bit8(unsigned int x)
+{
+ int b = 7, s;
+
+ s = 4; if (((unsigned char)(x << 4)) == 0) s = 0; b -= s; x <<= s;
+ s = 2; if (((unsigned char)(x << 2)) == 0) s = 0; b -= s; x <<= s;
+ s = 1; if (((unsigned char)(x << 1)) == 0) s = 0; b -= s;
+
+ return b;
+}
+
+/* mask off an interrupt -- 0 is enable, 1 is disable */
+static inline void mask_cpci_irq(unsigned int irq)
+{
+ uint32_t value;
+
+ value = OCELOT_FPGA_READ(INTMASK);
+ value |= 1 << (irq - CPCI_IRQ_BASE);
+ OCELOT_FPGA_WRITE(value, INTMASK);
+
+ /* read the value back to assure that it's really been written */
+ value = OCELOT_FPGA_READ(INTMASK);
+}
+
+/* unmask an interrupt -- 0 is enable, 1 is disable */
+static inline void unmask_cpci_irq(unsigned int irq)
+{
+ uint32_t value;
+
+ value = OCELOT_FPGA_READ(INTMASK);
+ value &= ~(1 << (irq - CPCI_IRQ_BASE));
+ OCELOT_FPGA_WRITE(value, INTMASK);
+
+ /* read the value back to assure that it's really been written */
+ value = OCELOT_FPGA_READ(INTMASK);
+}
+
+/*
+ * Enables the IRQ in the FPGA
+ */
+static void enable_cpci_irq(unsigned int irq)
+{
+ unmask_cpci_irq(irq);
+}
+
+/*
+ * Initialize the IRQ in the FPGA
+ */
+static unsigned int startup_cpci_irq(unsigned int irq)
+{
+ unmask_cpci_irq(irq);
+ return 0;
+}
+
+/*
+ * Disables the IRQ in the FPGA
+ */
+static void disable_cpci_irq(unsigned int irq)
+{
+ mask_cpci_irq(irq);
+}
+
+/*
+ * Masks and ACKs an IRQ
+ */
+static void mask_and_ack_cpci_irq(unsigned int irq)
+{
+ mask_cpci_irq(irq);
+}
+
+/*
+ * End IRQ processing
+ */
+static void end_cpci_irq(unsigned int irq)
+{
+ if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
+ unmask_cpci_irq(irq);
+}
+
+/*
+ * Interrupt handler for interrupts coming from the FPGA chip.
+ * It could be built in ethernet ports etc...
+ */
+void ll_cpci_irq(struct pt_regs *regs)
+{
+ unsigned int irq_src, irq_mask;
+
+ /* read the interrupt status registers */
+ irq_src = OCELOT_FPGA_READ(INTSTAT);
+ irq_mask = OCELOT_FPGA_READ(INTMASK);
+
+ /* mask for just the interrupts we want */
+ irq_src &= ~irq_mask;
+
+ do_IRQ(ls1bit8(irq_src) + CPCI_IRQ_BASE, regs);
+}
+
+#define shutdown_cpci_irq disable_cpci_irq
+
+struct hw_interrupt_type cpci_irq_type = {
+ "CPCI/FPGA",
+ startup_cpci_irq,
+ shutdown_cpci_irq,
+ enable_cpci_irq,
+ disable_cpci_irq,
+ mask_and_ack_cpci_irq,
+ end_cpci_irq,
+ NULL
+};
+
+void cpci_irq_init(void)
+{
+ int i;
+
+ /* Reset irq handlers pointers to NULL */
+ for (i = CPCI_IRQ_BASE; i < (CPCI_IRQ_BASE + 8); i++) {
+ irq_desc[i].status = IRQ_DISABLED;
+ irq_desc[i].action = 0;
+ irq_desc[i].depth = 2;
+ irq_desc[i].handler = &cpci_irq_type;
+ }
+}
diff --git a/arch/mips/momentum/ocelot_c/dbg_io.c b/arch/mips/momentum/ocelot_c/dbg_io.c
new file mode 100644
index 000000000000..8720bccfdea2
--- /dev/null
+++ b/arch/mips/momentum/ocelot_c/dbg_io.c
@@ -0,0 +1,126 @@
+#include <linux/config.h>
+
+#ifdef CONFIG_KGDB
+
+#include <asm/serial.h> /* For the serial port location and base baud */
+
+/* --- CONFIG --- */
+
+typedef unsigned char uint8;
+typedef unsigned int uint32;
+
+/* --- END OF CONFIG --- */
+
+#define UART16550_BAUD_2400 2400
+#define UART16550_BAUD_4800 4800
+#define UART16550_BAUD_9600 9600
+#define UART16550_BAUD_19200 19200
+#define UART16550_BAUD_38400 38400
+#define UART16550_BAUD_57600 57600
+#define UART16550_BAUD_115200 115200
+
+#define UART16550_PARITY_NONE 0
+#define UART16550_PARITY_ODD 0x08
+#define UART16550_PARITY_EVEN 0x18
+#define UART16550_PARITY_MARK 0x28
+#define UART16550_PARITY_SPACE 0x38
+
+#define UART16550_DATA_5BIT 0x0
+#define UART16550_DATA_6BIT 0x1
+#define UART16550_DATA_7BIT 0x2
+#define UART16550_DATA_8BIT 0x3
+
+#define UART16550_STOP_1BIT 0x0
+#define UART16550_STOP_2BIT 0x4
+
+/* ----------------------------------------------------- */
+
+/* === CONFIG === */
+
+/* [jsun] we use the second serial port for kdb */
+#define BASE OCELOT_SERIAL1_BASE
+#define MAX_BAUD OCELOT_BASE_BAUD
+
+/* === END OF CONFIG === */
+
+#define REG_OFFSET 4
+
+/* register offset */
+#define OFS_RCV_BUFFER 0
+#define OFS_TRANS_HOLD 0
+#define OFS_SEND_BUFFER 0
+#define OFS_INTR_ENABLE (1*REG_OFFSET)
+#define OFS_INTR_ID (2*REG_OFFSET)
+#define OFS_DATA_FORMAT (3*REG_OFFSET)
+#define OFS_LINE_CONTROL (3*REG_OFFSET)
+#define OFS_MODEM_CONTROL (4*REG_OFFSET)
+#define OFS_RS232_OUTPUT (4*REG_OFFSET)
+#define OFS_LINE_STATUS (5*REG_OFFSET)
+#define OFS_MODEM_STATUS (6*REG_OFFSET)
+#define OFS_RS232_INPUT (6*REG_OFFSET)
+#define OFS_SCRATCH_PAD (7*REG_OFFSET)
+
+#define OFS_DIVISOR_LSB (0*REG_OFFSET)
+#define OFS_DIVISOR_MSB (1*REG_OFFSET)
+
+
+/* memory-mapped read/write of the port */
+#define UART16550_READ(y) (*((volatile uint8*)(BASE + y)))
+#define UART16550_WRITE(y, z) ((*((volatile uint8*)(BASE + y))) = z)
+
+void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop)
+{
+ /* disable interrupts */
+ UART16550_WRITE(OFS_INTR_ENABLE, 0);
+
+ /* set up buad rate */
+ {
+ uint32 divisor;
+
+ /* set DIAB bit */
+ UART16550_WRITE(OFS_LINE_CONTROL, 0x80);
+
+ /* set divisor */
+ divisor = MAX_BAUD / baud;
+ UART16550_WRITE(OFS_DIVISOR_LSB, divisor & 0xff);
+ UART16550_WRITE(OFS_DIVISOR_MSB, (divisor & 0xff00) >> 8);
+
+ /* clear DIAB bit */
+ UART16550_WRITE(OFS_LINE_CONTROL, 0x0);
+ }
+
+ /* set data format */
+ UART16550_WRITE(OFS_DATA_FORMAT, data | parity | stop);
+}
+
+static int remoteDebugInitialized = 0;
+
+uint8 getDebugChar(void)
+{
+ if (!remoteDebugInitialized) {
+ remoteDebugInitialized = 1;
+ debugInit(UART16550_BAUD_38400,
+ UART16550_DATA_8BIT,
+ UART16550_PARITY_NONE, UART16550_STOP_1BIT);
+ }
+
+ while ((UART16550_READ(OFS_LINE_STATUS) & 0x1) == 0);
+ return UART16550_READ(OFS_RCV_BUFFER);
+}
+
+
+int putDebugChar(uint8 byte)
+{
+ if (!remoteDebugInitialized) {
+ remoteDebugInitialized = 1;
+ debugInit(UART16550_BAUD_38400,
+ UART16550_DATA_8BIT,
+ UART16550_PARITY_NONE, UART16550_STOP_1BIT);
+ }
+
+ while ((UART16550_READ(OFS_LINE_STATUS) & 0x20) == 0);
+ UART16550_WRITE(OFS_SEND_BUFFER, byte);
+ return 1;
+}
+
+#endif
diff --git a/arch/mips/momentum/ocelot_c/int-handler.S b/arch/mips/momentum/ocelot_c/int-handler.S
new file mode 100644
index 000000000000..2f2430648abc
--- /dev/null
+++ b/arch/mips/momentum/ocelot_c/int-handler.S
@@ -0,0 +1,102 @@
+/*
+ * Copyright 2002 Momentum Computer Inc.
+ * Author: Matthew Dharm <mdharm@momenco.com>
+ *
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: jsun@mvista.com or jsun@junsun.net
+ *
+ * First-level interrupt dispatcher for Ocelot-CS board.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#include <asm/asm.h>
+#include <asm/mipsregs.h>
+#include <asm/addrspace.h>
+#include <asm/regdef.h>
+#include <asm/stackframe.h>
+#include "ocelot_c_fpga.h"
+
+/*
+ * First level interrupt dispatcher for Ocelot-CS board
+ */
+ .align 5
+ NESTED(ocelot_handle_int, PT_SIZE, sp)
+ SAVE_ALL
+ CLI
+ .set at
+ mfc0 t0, CP0_CAUSE
+ mfc0 t2, CP0_STATUS
+
+ and t0, t2
+
+ andi t1, t0, STATUSF_IP0 /* sw0 software interrupt */
+ bnez t1, ll_sw0_irq
+ andi t1, t0, STATUSF_IP1 /* sw1 software interrupt */
+ bnez t1, ll_sw1_irq
+ andi t1, t0, STATUSF_IP2 /* int0 hardware line */
+ bnez t1, ll_scsi_irq
+ andi t1, t0, STATUSF_IP3 /* int1 hardware line */
+ bnez t1, ll_uart_decode_irq
+ andi t1, t0, STATUSF_IP4 /* int2 hardware line */
+ bnez t1, ll_pmc_irq
+ andi t1, t0, STATUSF_IP5 /* int3 hardware line */
+ bnez t1, ll_cpci_decode_irq
+ andi t1, t0, STATUSF_IP6 /* int4 hardware line */
+ bnez t1, ll_mv64340_decode_irq
+ andi t1, t0, STATUSF_IP7 /* cpu timer */
+ bnez t1, ll_cputimer_irq
+
+ .set reorder
+
+ /* wrong alarm or masked ... */
+ j spurious_interrupt
+ nop
+ END(ocelot_handle_int)
+
+ .align 5
+ll_sw0_irq:
+ li a0, 0
+ move a1, sp
+ jal do_IRQ
+ j ret_from_irq
+ll_sw1_irq:
+ li a0, 1
+ move a1, sp
+ jal do_IRQ
+ j ret_from_irq
+ll_scsi_irq:
+ li a0, 2
+ move a1, sp
+ jal do_IRQ
+ j ret_from_irq
+
+ll_uart_decode_irq:
+ move a0, sp
+ jal ll_uart_irq
+ j ret_from_irq
+
+ll_pmc_irq:
+ li a0, 4
+ move a1, sp
+ jal do_IRQ
+ j ret_from_irq
+
+ll_cpci_decode_irq:
+ move a0, sp
+ jal ll_cpci_irq
+ j ret_from_irq
+
+ll_mv64340_decode_irq:
+ move a0, sp
+ jal ll_mv64340_irq
+ j ret_from_irq
+
+ll_cputimer_irq:
+ li a0, 7
+ move a1, sp
+ jal do_IRQ
+ j ret_from_irq
+
diff --git a/arch/mips/momentum/ocelot_c/irq.c b/arch/mips/momentum/ocelot_c/irq.c
new file mode 100644
index 000000000000..300fe8e4fbe8
--- /dev/null
+++ b/arch/mips/momentum/ocelot_c/irq.c
@@ -0,0 +1,83 @@
+/*
+ * Copyright (C) 2000 RidgeRun, Inc.
+ * Author: RidgeRun, Inc.
+ * glonnon@ridgerun.com, skranz@ridgerun.com, stevej@ridgerun.com
+ *
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
+ * Copyright (C) 2000, 01, 05 Ralf Baechle (ralf@linux-mips.org)
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/kernel_stat.h>
+#include <linux/module.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/timex.h>
+#include <linux/slab.h>
+#include <linux/random.h>
+#include <linux/bitops.h>
+#include <asm/bootinfo.h>
+#include <asm/io.h>
+#include <asm/irq_cpu.h>
+#include <asm/mipsregs.h>
+#include <asm/mv64340.h>
+#include <asm/system.h>
+
+extern asmlinkage void ocelot_handle_int(void);
+extern void uart_irq_init(void);
+extern void cpci_irq_init(void);
+
+static struct irqaction cascade_fpga = {
+ no_action, SA_INTERRUPT, CPU_MASK_NONE, "cascade via FPGA", NULL, NULL
+};
+
+static struct irqaction cascade_mv64340 = {
+ no_action, SA_INTERRUPT, CPU_MASK_NONE, "cascade via MV64340", NULL, NULL
+};
+
+void __init arch_init_irq(void)
+{
+ /*
+ * Clear all of the interrupts while we change the able around a bit.
+ * int-handler is not on bootstrap
+ */
+ clear_c0_status(ST0_IM);
+
+ /* Sets the first-level interrupt dispatcher. */
+ set_except_vector(0, ocelot_handle_int);
+ mips_cpu_irq_init(0);
+
+ /* set up the cascading interrupts */
+ setup_irq(3, &cascade_fpga);
+ setup_irq(5, &cascade_fpga);
+ setup_irq(6, &cascade_mv64340);
+
+ mv64340_irq_init(16);
+ uart_irq_init();
+ cpci_irq_init();
+}
diff --git a/arch/mips/momentum/ocelot_c/ocelot_c_fpga.h b/arch/mips/momentum/ocelot_c/ocelot_c_fpga.h
new file mode 100644
index 000000000000..a6cf7a7959b3
--- /dev/null
+++ b/arch/mips/momentum/ocelot_c/ocelot_c_fpga.h
@@ -0,0 +1,60 @@
+/*
+ * Ocelot-C Board Register Definitions
+ *
+ * (C) 2002 Momentum Computer Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Louis Hamilton, Red Hat, Inc.
+ * hamilton@redhat.com [MIPS64 modifications]
+ */
+
+#ifndef __OCELOT_C_FPGA_H__
+#define __OCELOT_C_FPGA_H__
+
+#include <linux/config.h>
+
+#ifdef CONFIG_MIPS64
+#define OCELOT_C_CS0_ADDR (0xfffffffffc000000)
+#else
+#define OCELOT_C_CS0_ADDR (0xfc000000)
+#endif
+
+#define OCELOT_C_REG_BOARDREV 0x0
+#define OCELOT_C_REG_FPGA_REV 0x1
+#define OCELOT_C_REG_FPGA_TYPE 0x2
+#define OCELOT_C_REG_RESET_STATUS 0x3
+#define OCELOT_C_REG_BOARD_STATUS 0x4
+#define OCELOT_C_REG_CPCI_ID 0x5
+#define OCELOT_C_REG_SET 0x6
+#define OCELOT_C_REG_CLR 0x7
+#define OCELOT_C_REG_EEPROM_MODE 0x9
+#define OCELOT_C_REG_INTMASK 0xa
+#define OCELOT_C_REG_INTSTAT 0xb
+#define OCELOT_C_REG_UART_INTMASK 0xc
+#define OCELOT_C_REG_UART_INTSTAT 0xd
+#define OCELOT_C_REG_INTSET 0xe
+#define OCELOT_C_REG_INTCLR 0xf
+
+#define OCELOT_FPGA_WRITE(x, y) writeb(x, OCELOT_C_CS0_ADDR + OCELOT_C_REG_##y)
+#define OCELOT_FPGA_READ(x) readb(OCELOT_C_CS0_ADDR + OCELOT_C_REG_##x)
+
+#endif
diff --git a/arch/mips/momentum/ocelot_c/prom.c b/arch/mips/momentum/ocelot_c/prom.c
new file mode 100644
index 000000000000..49ac302d8901
--- /dev/null
+++ b/arch/mips/momentum/ocelot_c/prom.c
@@ -0,0 +1,243 @@
+/*
+ * Copyright 2002 Momentum Computer Inc.
+ * Author: Matthew Dharm <mdharm@momenco.com>
+ *
+ * Louis Hamilton, Red Hat, Inc.
+ * hamilton@redhat.com [MIPS64 modifications]
+ *
+ * Based on Ocelot Linux port, which is
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: jsun@mvista.com or jsun@junsun.net
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/bootmem.h>
+
+#include <asm/addrspace.h>
+#include <asm/bootinfo.h>
+#include <asm/mv64340.h>
+#include <asm/pmon.h>
+
+#include "ocelot_c_fpga.h"
+
+struct callvectors* debug_vectors;
+
+extern unsigned long marvell_base;
+extern unsigned long cpu_clock;
+
+#ifdef CONFIG_MV643XX_ETH
+extern unsigned char prom_mac_addr_base[6];
+#endif
+
+const char *get_system_type(void)
+{
+#ifdef CONFIG_CPU_SR71000
+ return "Momentum Ocelot-CS";
+#else
+ return "Momentum Ocelot-C";
+#endif
+}
+
+#ifdef CONFIG_MV643XX_ETH
+static void burn_clocks(void)
+{
+ int i;
+
+ /* this loop should burn at least 1us -- this should be plenty */
+ for (i = 0; i < 0x10000; i++)
+ ;
+}
+
+static u8 exchange_bit(u8 val, u8 cs)
+{
+ /* place the data */
+ OCELOT_FPGA_WRITE((val << 2) | cs, EEPROM_MODE);
+ burn_clocks();
+
+ /* turn the clock on */
+ OCELOT_FPGA_WRITE((val << 2) | cs | 0x2, EEPROM_MODE);
+ burn_clocks();
+
+ /* turn the clock off and read-strobe */
+ OCELOT_FPGA_WRITE((val << 2) | cs | 0x10, EEPROM_MODE);
+
+ /* return the data */
+ return ((OCELOT_FPGA_READ(EEPROM_MODE) >> 3) & 0x1);
+}
+
+void get_mac(char dest[6])
+{
+ u8 read_opcode[12] = {1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
+ int i,j;
+
+ for (i = 0; i < 12; i++)
+ exchange_bit(read_opcode[i], 1);
+
+ for (j = 0; j < 6; j++) {
+ dest[j] = 0;
+ for (i = 0; i < 8; i++) {
+ dest[j] <<= 1;
+ dest[j] |= exchange_bit(0, 1);
+ }
+ }
+
+ /* turn off CS */
+ exchange_bit(0,0);
+}
+#endif
+
+
+#ifdef CONFIG_MIPS64
+
+unsigned long signext(unsigned long addr)
+{
+ addr &= 0xffffffff;
+ return (unsigned long)((int)addr);
+}
+
+void *get_arg(unsigned long args, int arc)
+{
+ unsigned long ul;
+ unsigned char *puc, uc;
+
+ args += (arc * 4);
+ ul = (unsigned long)signext(args);
+ puc = (unsigned char *)ul;
+ if (puc == 0)
+ return (void *)0;
+
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
+ uc = *puc++;
+ ul = (unsigned long)uc;
+ uc = *puc++;
+ ul |= (((unsigned long)uc) << 8);
+ uc = *puc++;
+ ul |= (((unsigned long)uc) << 16);
+ uc = *puc++;
+ ul |= (((unsigned long)uc) << 24);
+#else /* CONFIG_CPU_LITTLE_ENDIAN */
+ uc = *puc++;
+ ul = ((unsigned long)uc) << 24;
+ uc = *puc++;
+ ul |= (((unsigned long)uc) << 16);
+ uc = *puc++;
+ ul |= (((unsigned long)uc) << 8);
+ uc = *puc++;
+ ul |= ((unsigned long)uc);
+#endif /* CONFIG_CPU_LITTLE_ENDIAN */
+ ul = signext(ul);
+ return (void *)ul;
+}
+
+char *arg64(unsigned long addrin, int arg_index)
+{
+ unsigned long args;
+ char *p;
+ args = signext(addrin);
+ p = (char *)get_arg(args, arg_index);
+ return p;
+}
+#endif /* CONFIG_MIPS64 */
+
+
+void __init prom_init(void)
+{
+ int argc = fw_arg0;
+ char **arg = (char **) fw_arg1;
+ char **env = (char **) fw_arg2;
+ struct callvectors *cv = (struct callvectors *) fw_arg3;
+ int i;
+
+#ifdef CONFIG_MIPS64
+ char *ptr;
+
+ printk("prom_init - MIPS64\n");
+ /* save the PROM vectors for debugging use */
+ debug_vectors = (struct callvectors *)signext((unsigned long)cv);
+
+ /* arg[0] is "g", the rest is boot parameters */
+ arcs_cmdline[0] = '\0';
+
+ for (i = 1; i < argc; i++) {
+ ptr = (char *)arg64((unsigned long)arg, i);
+ if ((strlen(arcs_cmdline) + strlen(ptr) + 1) >=
+ sizeof(arcs_cmdline))
+ break;
+ strcat(arcs_cmdline, ptr);
+ strcat(arcs_cmdline, " ");
+ }
+ i = 0;
+ while (1) {
+ ptr = (char *)arg64((unsigned long)env, i);
+ if (! ptr)
+ break;
+
+ if (strncmp("gtbase", ptr, strlen("gtbase")) == 0) {
+ marvell_base = simple_strtol(ptr + strlen("gtbase="),
+ NULL, 16);
+
+ if ((marvell_base & 0xffffffff00000000) == 0)
+ marvell_base |= 0xffffffff00000000;
+
+ printk("marvell_base set to 0x%016lx\n", marvell_base);
+ }
+ if (strncmp("cpuclock", ptr, strlen("cpuclock")) == 0) {
+ cpu_clock = simple_strtol(ptr + strlen("cpuclock="),
+ NULL, 10);
+ printk("cpu_clock set to %d\n", cpu_clock);
+ }
+ i++;
+ }
+ printk("arcs_cmdline: %s\n", arcs_cmdline);
+
+#else /* CONFIG_MIPS64 */
+ /* save the PROM vectors for debugging use */
+ debug_vectors = cv;
+
+ /* arg[0] is "g", the rest is boot parameters */
+ arcs_cmdline[0] = '\0';
+ for (i = 1; i < argc; i++) {
+ if (strlen(arcs_cmdline) + strlen(arg[i] + 1)
+ >= sizeof(arcs_cmdline))
+ break;
+ strcat(arcs_cmdline, arg[i]);
+ strcat(arcs_cmdline, " ");
+ }
+
+ while (*env) {
+ if (strncmp("gtbase", *env, strlen("gtbase")) == 0) {
+ marvell_base = simple_strtol(*env + strlen("gtbase="),
+ NULL, 16);
+ }
+ if (strncmp("cpuclock", *env, strlen("cpuclock")) == 0) {
+ cpu_clock = simple_strtol(*env + strlen("cpuclock="),
+ NULL, 10);
+ }
+ env++;
+ }
+#endif /* CONFIG_MIPS64 */
+
+ mips_machgroup = MACH_GROUP_MOMENCO;
+ mips_machtype = MACH_MOMENCO_OCELOT_C;
+
+#ifdef CONFIG_MV643XX_ETH
+ /* get the base MAC address for on-board ethernet ports */
+ get_mac(prom_mac_addr_base);
+#endif
+
+#ifndef CONFIG_MIPS64
+ debug_vectors->printf("Booting Linux kernel...\n");
+#endif
+}
+
+unsigned long __init prom_free_prom_memory(void)
+{
+ return 0;
+}
diff --git a/arch/mips/momentum/ocelot_c/reset.c b/arch/mips/momentum/ocelot_c/reset.c
new file mode 100644
index 000000000000..1f2b4263cc8c
--- /dev/null
+++ b/arch/mips/momentum/ocelot_c/reset.c
@@ -0,0 +1,59 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * Copyright (C) 1997, 2001 Ralf Baechle
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: jsun@mvista.com or jsun@junsun.net
+ *
+ * Copyright (C) 2002 Momentum Computer Inc.
+ * Author: Matthew Dharm <mdharm@momenco.com>
+ *
+ * Louis Hamilton, Red Hat, Inc.
+ * hamilton@redhat.com [MIPS64 modifications]
+ */
+#include <linux/config.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <asm/io.h>
+#include <asm/pgtable.h>
+#include <asm/processor.h>
+#include <asm/reboot.h>
+#include <asm/system.h>
+#include <linux/delay.h>
+
+void momenco_ocelot_restart(char *command)
+{
+ /* base address of timekeeper portion of part */
+ void *nvram = (void *)
+#ifdef CONFIG_MIPS64
+ 0xfffffffffc807000;
+#else
+ 0xfc807000;
+#endif
+
+ /* Ask the NVRAM/RTC/watchdog chip to assert reset in 1/16 second */
+ writeb(0x84, nvram + 0xff7);
+
+ /* wait for the watchdog to go off */
+ mdelay(100+(1000/16));
+
+ /* if the watchdog fails for some reason, let people know */
+ printk(KERN_NOTICE "Watchdog reset failed\n");
+}
+
+void momenco_ocelot_halt(void)
+{
+ printk(KERN_NOTICE "\n** You can safely turn off the power\n");
+ while (1)
+ __asm__(".set\tmips3\n\t"
+ "wait\n\t"
+ ".set\tmips0");
+}
+
+void momenco_ocelot_power_off(void)
+{
+ momenco_ocelot_halt();
+}
diff --git a/arch/mips/momentum/ocelot_c/setup.c b/arch/mips/momentum/ocelot_c/setup.c
new file mode 100644
index 000000000000..021c00e3c07c
--- /dev/null
+++ b/arch/mips/momentum/ocelot_c/setup.c
@@ -0,0 +1,363 @@
+/*
+ * BRIEF MODULE DESCRIPTION
+ * Momentum Computer Ocelot-C and -CS board dependent boot routines
+ *
+ * Copyright (C) 1996, 1997, 2001 Ralf Baechle
+ * Copyright (C) 2000 RidgeRun, Inc.
+ * Copyright (C) 2001 Red Hat, Inc.
+ * Copyright (C) 2002 Momentum Computer
+ *
+ * Author: Matthew Dharm, Momentum Computer
+ * mdharm@momenco.com
+ *
+ * Louis Hamilton, Red Hat, Inc.
+ * hamilton@redhat.com [MIPS64 modifications]
+ *
+ * Author: RidgeRun, Inc.
+ * glonnon@ridgerun.com, skranz@ridgerun.com, stevej@ridgerun.com
+ *
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: jsun@mvista.com or jsun@junsun.net
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+#include <linux/config.h>
+#include <linux/bcd.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <linux/swap.h>
+#include <linux/ioport.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/timex.h>
+#include <linux/vmalloc.h>
+#include <asm/time.h>
+#include <asm/bootinfo.h>
+#include <asm/page.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/pci.h>
+#include <asm/processor.h>
+#include <asm/ptrace.h>
+#include <asm/reboot.h>
+#include <linux/bootmem.h>
+#include <linux/blkdev.h>
+#include <asm/mv64340.h>
+#include "ocelot_c_fpga.h"
+
+unsigned long marvell_base;
+extern unsigned long mv64340_sram_base;
+unsigned long cpu_clock;
+
+/* These functions are used for rebooting or halting the machine*/
+extern void momenco_ocelot_restart(char *command);
+extern void momenco_ocelot_halt(void);
+extern void momenco_ocelot_power_off(void);
+
+void momenco_time_init(void);
+
+static char reset_reason;
+
+void add_wired_entry(unsigned long entrylo0, unsigned long entrylo1, unsigned long entryhi, unsigned long pagemask);
+
+static unsigned long ENTRYLO(unsigned long paddr)
+{
+ return ((paddr & PAGE_MASK) |
+ (_PAGE_PRESENT | __READABLE | __WRITEABLE | _PAGE_GLOBAL |
+ _CACHE_UNCACHED)) >> 6;
+}
+
+/* setup code for a handoff from a version 2 PMON 2000 PROM */
+void PMON_v2_setup(void)
+{
+ /* Some wired TLB entries for the MV64340 and perhiperals. The
+ MV64340 is going to be hit on every IRQ anyway - there's
+ absolutely no point in letting it be a random TLB entry, as
+ it'll just cause needless churning of the TLB. And we use
+ the other half for the serial port, which is just a PITA
+ otherwise :)
+
+ Device Physical Virtual
+ MV64340 Internal Regs 0xf4000000 0xf4000000
+ Ocelot-C[S] PLD (CS0) 0xfc000000 0xfc000000
+ NVRAM (CS1) 0xfc800000 0xfc800000
+ UARTs (CS2) 0xfd000000 0xfd000000
+ Internal SRAM 0xfe000000 0xfe000000
+ M-Systems DOC (CS3) 0xff000000 0xff000000
+ */
+ printk("PMON_v2_setup\n");
+
+#ifdef CONFIG_MIPS64
+ /* marvell and extra space */
+ add_wired_entry(ENTRYLO(0xf4000000), ENTRYLO(0xf4010000), 0xfffffffff4000000, PM_64K);
+ /* fpga, rtc, and uart */
+ add_wired_entry(ENTRYLO(0xfc000000), ENTRYLO(0xfd000000), 0xfffffffffc000000, PM_16M);
+ /* m-sys and internal SRAM */
+ add_wired_entry(ENTRYLO(0xfe000000), ENTRYLO(0xff000000), 0xfffffffffe000000, PM_16M);
+
+ marvell_base = 0xfffffffff4000000;
+ mv64340_sram_base = 0xfffffffffe000000;
+#else
+ /* marvell and extra space */
+ add_wired_entry(ENTRYLO(0xf4000000), ENTRYLO(0xf4010000), 0xf4000000, PM_64K);
+ /* fpga, rtc, and uart */
+ add_wired_entry(ENTRYLO(0xfc000000), ENTRYLO(0xfd000000), 0xfc000000, PM_16M);
+ /* m-sys and internal SRAM */
+ add_wired_entry(ENTRYLO(0xfe000000), ENTRYLO(0xff000000), 0xfe000000, PM_16M);
+
+ marvell_base = 0xf4000000;
+ mv64340_sram_base = 0xfe000000;
+#endif
+}
+
+unsigned long m48t37y_get_time(void)
+{
+#ifdef CONFIG_MIPS64
+ unsigned char *rtc_base = (unsigned char*)0xfffffffffc800000;
+#else
+ unsigned char* rtc_base = (unsigned char*)0xfc800000;
+#endif
+ unsigned int year, month, day, hour, min, sec;
+
+ /* stop the update */
+ rtc_base[0x7ff8] = 0x40;
+
+ year = BCD2BIN(rtc_base[0x7fff]);
+ year += BCD2BIN(rtc_base[0x7ff1]) * 100;
+
+ month = BCD2BIN(rtc_base[0x7ffe]);
+
+ day = BCD2BIN(rtc_base[0x7ffd]);
+
+ hour = BCD2BIN(rtc_base[0x7ffb]);
+ min = BCD2BIN(rtc_base[0x7ffa]);
+ sec = BCD2BIN(rtc_base[0x7ff9]);
+
+ /* start the update */
+ rtc_base[0x7ff8] = 0x00;
+
+ return mktime(year, month, day, hour, min, sec);
+}
+
+int m48t37y_set_time(unsigned long sec)
+{
+#ifdef CONFIG_MIPS64
+ unsigned char* rtc_base = (unsigned char*)0xfffffffffc800000;
+#else
+ unsigned char* rtc_base = (unsigned char*)0xfc800000;
+#endif
+ struct rtc_time tm;
+
+ /* convert to a more useful format -- note months count from 0 */
+ to_tm(sec, &tm);
+ tm.tm_mon += 1;
+
+ /* enable writing */
+ rtc_base[0x7ff8] = 0x80;
+
+ /* year */
+ rtc_base[0x7fff] = BIN2BCD(tm.tm_year % 100);
+ rtc_base[0x7ff1] = BIN2BCD(tm.tm_year / 100);
+
+ /* month */
+ rtc_base[0x7ffe] = BIN2BCD(tm.tm_mon);
+
+ /* day */
+ rtc_base[0x7ffd] = BIN2BCD(tm.tm_mday);
+
+ /* hour/min/sec */
+ rtc_base[0x7ffb] = BIN2BCD(tm.tm_hour);
+ rtc_base[0x7ffa] = BIN2BCD(tm.tm_min);
+ rtc_base[0x7ff9] = BIN2BCD(tm.tm_sec);
+
+ /* day of week -- not really used, but let's keep it up-to-date */
+ rtc_base[0x7ffc] = BIN2BCD(tm.tm_wday + 1);
+
+ /* disable writing */
+ rtc_base[0x7ff8] = 0x00;
+
+ return 0;
+}
+
+void momenco_timer_setup(struct irqaction *irq)
+{
+ setup_irq(7, irq);
+}
+
+void momenco_time_init(void)
+{
+#ifdef CONFIG_CPU_SR71000
+ mips_hpt_frequency = cpu_clock;
+#elif defined(CONFIG_CPU_RM7000)
+ mips_hpt_frequency = cpu_clock / 2;
+#else
+#error Unknown CPU for this board
+#endif
+ printk("momenco_time_init cpu_clock=%d\n", cpu_clock);
+ board_timer_setup = momenco_timer_setup;
+
+ rtc_get_time = m48t37y_get_time;
+ rtc_set_time = m48t37y_set_time;
+}
+
+static void __init momenco_ocelot_c_setup(void)
+{
+ unsigned int tmpword;
+
+ board_time_init = momenco_time_init;
+
+ _machine_restart = momenco_ocelot_restart;
+ _machine_halt = momenco_ocelot_halt;
+ _machine_power_off = momenco_ocelot_power_off;
+
+ /*
+ * initrd_start = (ulong)ocelot_initrd_start;
+ * initrd_end = (ulong)ocelot_initrd_start + (ulong)ocelot_initrd_size;
+ * initrd_below_start_ok = 1;
+ */
+
+ /* do handoff reconfiguration */
+ PMON_v2_setup();
+
+ /* shut down ethernet ports, just to be sure our memory doesn't get
+ * corrupted by random ethernet traffic.
+ */
+ MV_WRITE(MV64340_ETH_TRANSMIT_QUEUE_COMMAND_REG(0), 0xff << 8);
+ MV_WRITE(MV64340_ETH_TRANSMIT_QUEUE_COMMAND_REG(1), 0xff << 8);
+ MV_WRITE(MV64340_ETH_RECEIVE_QUEUE_COMMAND_REG(0), 0xff << 8);
+ MV_WRITE(MV64340_ETH_RECEIVE_QUEUE_COMMAND_REG(1), 0xff << 8);
+ do {}
+ while (MV_READ(MV64340_ETH_RECEIVE_QUEUE_COMMAND_REG(0)) & 0xff);
+ do {}
+ while (MV_READ(MV64340_ETH_RECEIVE_QUEUE_COMMAND_REG(1)) & 0xff);
+ do {}
+ while (MV_READ(MV64340_ETH_TRANSMIT_QUEUE_COMMAND_REG(0)) & 0xff);
+ do {}
+ while (MV_READ(MV64340_ETH_TRANSMIT_QUEUE_COMMAND_REG(1)) & 0xff);
+ MV_WRITE(MV64340_ETH_PORT_SERIAL_CONTROL_REG(0),
+ MV_READ(MV64340_ETH_PORT_SERIAL_CONTROL_REG(0)) & ~1);
+ MV_WRITE(MV64340_ETH_PORT_SERIAL_CONTROL_REG(1),
+ MV_READ(MV64340_ETH_PORT_SERIAL_CONTROL_REG(1)) & ~1);
+
+ /* Turn off the Bit-Error LED */
+ OCELOT_FPGA_WRITE(0x80, CLR);
+
+ tmpword = OCELOT_FPGA_READ(BOARDREV);
+#ifdef CONFIG_CPU_SR71000
+ if (tmpword < 26)
+ printk("Momenco Ocelot-CS: Board Assembly Rev. %c\n",
+ 'A'+tmpword);
+ else
+ printk("Momenco Ocelot-CS: Board Assembly Revision #0x%x\n",
+ tmpword);
+#else
+ if (tmpword < 26)
+ printk("Momenco Ocelot-C: Board Assembly Rev. %c\n",
+ 'A'+tmpword);
+ else
+ printk("Momenco Ocelot-C: Board Assembly Revision #0x%x\n",
+ tmpword);
+#endif
+
+ tmpword = OCELOT_FPGA_READ(FPGA_REV);
+ printk("FPGA Rev: %d.%d\n", tmpword>>4, tmpword&15);
+ tmpword = OCELOT_FPGA_READ(RESET_STATUS);
+ printk("Reset reason: 0x%x\n", tmpword);
+ switch (tmpword) {
+ case 0x1:
+ printk(" - Power-up reset\n");
+ break;
+ case 0x2:
+ printk(" - Push-button reset\n");
+ break;
+ case 0x4:
+ printk(" - cPCI bus reset\n");
+ break;
+ case 0x8:
+ printk(" - Watchdog reset\n");
+ break;
+ case 0x10:
+ printk(" - Software reset\n");
+ break;
+ default:
+ printk(" - Unknown reset cause\n");
+ }
+ reset_reason = tmpword;
+ OCELOT_FPGA_WRITE(0xff, RESET_STATUS);
+
+ tmpword = OCELOT_FPGA_READ(CPCI_ID);
+ printk("cPCI ID register: 0x%02x\n", tmpword);
+ printk(" - Slot number: %d\n", tmpword & 0x1f);
+ printk(" - PCI bus present: %s\n", tmpword & 0x40 ? "yes" : "no");
+ printk(" - System Slot: %s\n", tmpword & 0x20 ? "yes" : "no");
+
+ tmpword = OCELOT_FPGA_READ(BOARD_STATUS);
+ printk("Board Status register: 0x%02x\n", tmpword);
+ printk(" - User jumper: %s\n", (tmpword & 0x80)?"installed":"absent");
+ printk(" - Boot flash write jumper: %s\n", (tmpword&0x40)?"installed":"absent");
+ printk(" - L3 Cache size: %d MiB\n", (1<<((tmpword&12) >> 2))&~1);
+ printk(" - SDRAM size: %d MiB\n", 1<<(6+(tmpword&3)));
+
+ switch(tmpword &3) {
+ case 3:
+ /* 512MiB */
+ add_memory_region(0x0, 0x200<<20, BOOT_MEM_RAM);
+ break;
+ case 2:
+ /* 256MiB */
+ add_memory_region(0x0, 0x100<<20, BOOT_MEM_RAM);
+ break;
+ case 1:
+ /* 128MiB */
+ add_memory_region(0x0, 0x80<<20, BOOT_MEM_RAM);
+ break;
+ case 0:
+ /* 1GiB -- needs CONFIG_HIGHMEM */
+ add_memory_region(0x0, 0x400<<20, BOOT_MEM_RAM);
+ break;
+ }
+}
+
+early_initcall(momenco_ocelot_c_setup);
+
+#ifndef CONFIG_MIPS64
+/* This needs to be one of the first initcalls, because no I/O port access
+ can work before this */
+static int io_base_ioremap(void)
+{
+ /* we're mapping PCI accesses from 0xc0000000 to 0xf0000000 */
+ void *io_remap_range = ioremap(0xc0000000, 0x30000000);
+
+ if (!io_remap_range) {
+ panic("Could not ioremap I/O port range");
+ }
+ printk("io_remap_range set at 0x%08x\n", (uint32_t)io_remap_range);
+ set_io_port_base(io_remap_range - 0xc0000000);
+
+ return 0;
+}
+
+module_init(io_base_ioremap);
+#endif
diff --git a/arch/mips/momentum/ocelot_c/uart-irq.c b/arch/mips/momentum/ocelot_c/uart-irq.c
new file mode 100644
index 000000000000..ebe1507b17df
--- /dev/null
+++ b/arch/mips/momentum/ocelot_c/uart-irq.c
@@ -0,0 +1,147 @@
+/*
+ * Copyright 2002 Momentum Computer
+ * Author: mdharm@momenco.com
+ *
+ * arch/mips/momentum/ocelot_c/uart-irq.c
+ * Interrupt routines for UARTs. Interrupt numbers are assigned from
+ * 80 to 81 (2 interrupt sources).
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <asm/ptrace.h>
+#include <linux/sched.h>
+#include <linux/kernel_stat.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include "ocelot_c_fpga.h"
+
+static inline int ls1bit8(unsigned int x)
+{
+ int b = 7, s;
+
+ s = 4; if (((unsigned char)(x << 4)) == 0) s = 0; b -= s; x <<= s;
+ s = 2; if (((unsigned char)(x << 2)) == 0) s = 0; b -= s; x <<= s;
+ s = 1; if (((unsigned char)(x << 1)) == 0) s = 0; b -= s;
+
+ return b;
+}
+
+/* mask off an interrupt -- 0 is enable, 1 is disable */
+static inline void mask_uart_irq(unsigned int irq)
+{
+ uint8_t value;
+
+ value = OCELOT_FPGA_READ(UART_INTMASK);
+ value |= 1 << (irq - 74);
+ OCELOT_FPGA_WRITE(value, UART_INTMASK);
+
+ /* read the value back to assure that it's really been written */
+ value = OCELOT_FPGA_READ(UART_INTMASK);
+}
+
+/* unmask an interrupt -- 0 is enable, 1 is disable */
+static inline void unmask_uart_irq(unsigned int irq)
+{
+ uint8_t value;
+
+ value = OCELOT_FPGA_READ(UART_INTMASK);
+ value &= ~(1 << (irq - 74));
+ OCELOT_FPGA_WRITE(value, UART_INTMASK);
+
+ /* read the value back to assure that it's really been written */
+ value = OCELOT_FPGA_READ(UART_INTMASK);
+}
+
+/*
+ * Enables the IRQ in the FPGA
+ */
+static void enable_uart_irq(unsigned int irq)
+{
+ unmask_uart_irq(irq);
+}
+
+/*
+ * Initialize the IRQ in the FPGA
+ */
+static unsigned int startup_uart_irq(unsigned int irq)
+{
+ unmask_uart_irq(irq);
+ return 0;
+}
+
+/*
+ * Disables the IRQ in the FPGA
+ */
+static void disable_uart_irq(unsigned int irq)
+{
+ mask_uart_irq(irq);
+}
+
+/*
+ * Masks and ACKs an IRQ
+ */
+static void mask_and_ack_uart_irq(unsigned int irq)
+{
+ mask_uart_irq(irq);
+}
+
+/*
+ * End IRQ processing
+ */
+static void end_uart_irq(unsigned int irq)
+{
+ if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
+ unmask_uart_irq(irq);
+}
+
+/*
+ * Interrupt handler for interrupts coming from the FPGA chip.
+ */
+void ll_uart_irq(struct pt_regs *regs)
+{
+ unsigned int irq_src, irq_mask;
+
+ /* read the interrupt status registers */
+ irq_src = OCELOT_FPGA_READ(UART_INTSTAT);
+ irq_mask = OCELOT_FPGA_READ(UART_INTMASK);
+
+ /* mask for just the interrupts we want */
+ irq_src &= ~irq_mask;
+
+ do_IRQ(ls1bit8(irq_src) + 74, regs);
+}
+
+#define shutdown_uart_irq disable_uart_irq
+
+struct hw_interrupt_type uart_irq_type = {
+ "UART/FPGA",
+ startup_uart_irq,
+ shutdown_uart_irq,
+ enable_uart_irq,
+ disable_uart_irq,
+ mask_and_ack_uart_irq,
+ end_uart_irq,
+ NULL
+};
+
+void uart_irq_init(void)
+{
+ /* Reset irq handlers pointers to NULL */
+ irq_desc[80].status = IRQ_DISABLED;
+ irq_desc[80].action = 0;
+ irq_desc[80].depth = 2;
+ irq_desc[80].handler = &uart_irq_type;
+
+ irq_desc[81].status = IRQ_DISABLED;
+ irq_desc[81].action = 0;
+ irq_desc[81].depth = 2;
+ irq_desc[81].handler = &uart_irq_type;
+}
diff --git a/arch/mips/momentum/ocelot_g/Makefile b/arch/mips/momentum/ocelot_g/Makefile
new file mode 100644
index 000000000000..e5f1cb086973
--- /dev/null
+++ b/arch/mips/momentum/ocelot_g/Makefile
@@ -0,0 +1,8 @@
+#
+# Makefile for Momentum Computer's Ocelot-G board.
+#
+
+obj-y += int-handler.o irq.o gt-irq.o prom.o reset.o setup.o
+obj-$(CONFIG_KGDB) += dbg_io.o
+
+EXTRA_AFLAGS := $(CFLAGS)
diff --git a/arch/mips/momentum/ocelot_g/dbg_io.c b/arch/mips/momentum/ocelot_g/dbg_io.c
new file mode 100644
index 000000000000..8720bccfdea2
--- /dev/null
+++ b/arch/mips/momentum/ocelot_g/dbg_io.c
@@ -0,0 +1,126 @@
+#include <linux/config.h>
+
+#ifdef CONFIG_KGDB
+
+#include <asm/serial.h> /* For the serial port location and base baud */
+
+/* --- CONFIG --- */
+
+typedef unsigned char uint8;
+typedef unsigned int uint32;
+
+/* --- END OF CONFIG --- */
+
+#define UART16550_BAUD_2400 2400
+#define UART16550_BAUD_4800 4800
+#define UART16550_BAUD_9600 9600
+#define UART16550_BAUD_19200 19200
+#define UART16550_BAUD_38400 38400
+#define UART16550_BAUD_57600 57600
+#define UART16550_BAUD_115200 115200
+
+#define UART16550_PARITY_NONE 0
+#define UART16550_PARITY_ODD 0x08
+#define UART16550_PARITY_EVEN 0x18
+#define UART16550_PARITY_MARK 0x28
+#define UART16550_PARITY_SPACE 0x38
+
+#define UART16550_DATA_5BIT 0x0
+#define UART16550_DATA_6BIT 0x1
+#define UART16550_DATA_7BIT 0x2
+#define UART16550_DATA_8BIT 0x3
+
+#define UART16550_STOP_1BIT 0x0
+#define UART16550_STOP_2BIT 0x4
+
+/* ----------------------------------------------------- */
+
+/* === CONFIG === */
+
+/* [jsun] we use the second serial port for kdb */
+#define BASE OCELOT_SERIAL1_BASE
+#define MAX_BAUD OCELOT_BASE_BAUD
+
+/* === END OF CONFIG === */
+
+#define REG_OFFSET 4
+
+/* register offset */
+#define OFS_RCV_BUFFER 0
+#define OFS_TRANS_HOLD 0
+#define OFS_SEND_BUFFER 0
+#define OFS_INTR_ENABLE (1*REG_OFFSET)
+#define OFS_INTR_ID (2*REG_OFFSET)
+#define OFS_DATA_FORMAT (3*REG_OFFSET)
+#define OFS_LINE_CONTROL (3*REG_OFFSET)
+#define OFS_MODEM_CONTROL (4*REG_OFFSET)
+#define OFS_RS232_OUTPUT (4*REG_OFFSET)
+#define OFS_LINE_STATUS (5*REG_OFFSET)
+#define OFS_MODEM_STATUS (6*REG_OFFSET)
+#define OFS_RS232_INPUT (6*REG_OFFSET)
+#define OFS_SCRATCH_PAD (7*REG_OFFSET)
+
+#define OFS_DIVISOR_LSB (0*REG_OFFSET)
+#define OFS_DIVISOR_MSB (1*REG_OFFSET)
+
+
+/* memory-mapped read/write of the port */
+#define UART16550_READ(y) (*((volatile uint8*)(BASE + y)))
+#define UART16550_WRITE(y, z) ((*((volatile uint8*)(BASE + y))) = z)
+
+void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop)
+{
+ /* disable interrupts */
+ UART16550_WRITE(OFS_INTR_ENABLE, 0);
+
+ /* set up buad rate */
+ {
+ uint32 divisor;
+
+ /* set DIAB bit */
+ UART16550_WRITE(OFS_LINE_CONTROL, 0x80);
+
+ /* set divisor */
+ divisor = MAX_BAUD / baud;
+ UART16550_WRITE(OFS_DIVISOR_LSB, divisor & 0xff);
+ UART16550_WRITE(OFS_DIVISOR_MSB, (divisor & 0xff00) >> 8);
+
+ /* clear DIAB bit */
+ UART16550_WRITE(OFS_LINE_CONTROL, 0x0);
+ }
+
+ /* set data format */
+ UART16550_WRITE(OFS_DATA_FORMAT, data | parity | stop);
+}
+
+static int remoteDebugInitialized = 0;
+
+uint8 getDebugChar(void)
+{
+ if (!remoteDebugInitialized) {
+ remoteDebugInitialized = 1;
+ debugInit(UART16550_BAUD_38400,
+ UART16550_DATA_8BIT,
+ UART16550_PARITY_NONE, UART16550_STOP_1BIT);
+ }
+
+ while ((UART16550_READ(OFS_LINE_STATUS) & 0x1) == 0);
+ return UART16550_READ(OFS_RCV_BUFFER);
+}
+
+
+int putDebugChar(uint8 byte)
+{
+ if (!remoteDebugInitialized) {
+ remoteDebugInitialized = 1;
+ debugInit(UART16550_BAUD_38400,
+ UART16550_DATA_8BIT,
+ UART16550_PARITY_NONE, UART16550_STOP_1BIT);
+ }
+
+ while ((UART16550_READ(OFS_LINE_STATUS) & 0x20) == 0);
+ UART16550_WRITE(OFS_SEND_BUFFER, byte);
+ return 1;
+}
+
+#endif
diff --git a/arch/mips/momentum/ocelot_g/gt-irq.c b/arch/mips/momentum/ocelot_g/gt-irq.c
new file mode 100644
index 000000000000..d0b5c9dd0ea4
--- /dev/null
+++ b/arch/mips/momentum/ocelot_g/gt-irq.c
@@ -0,0 +1,214 @@
+/*
+ *
+ * Copyright 2002 Momentum Computer
+ * Author: mdharm@momenco.com
+ *
+ * arch/mips/momentum/ocelot_g/gt_irq.c
+ * Interrupt routines for gt64240. Currently it only handles timer irq.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <asm/ptrace.h>
+#include <linux/sched.h>
+#include <linux/kernel_stat.h>
+#include <asm/gt64240.h>
+#include <asm/io.h>
+
+unsigned long bus_clock;
+
+/*
+ * These are interrupt handlers for the GT on-chip interrupts. They
+ * all come in to the MIPS on a single interrupt line, and have to
+ * be handled and ack'ed differently than other MIPS interrupts.
+ */
+
+#if CURRENTLY_UNUSED
+
+struct tq_struct irq_handlers[MAX_CAUSE_REGS][MAX_CAUSE_REG_WIDTH];
+void hook_irq_handler(int int_cause, int bit_num, void *isr_ptr);
+
+/*
+ * Hooks IRQ handler to the system. When the system is interrupted
+ * the interrupt service routine is called.
+ *
+ * Inputs :
+ * int_cause - The interrupt cause number. In EVB64120 two parameters
+ * are declared, INT_CAUSE_MAIN and INT_CAUSE_HIGH.
+ * bit_num - Indicates which bit number in the cause register
+ * isr_ptr - Pointer to the interrupt service routine
+ */
+void hook_irq_handler(int int_cause, int bit_num, void *isr_ptr)
+{
+ irq_handlers[int_cause][bit_num].routine = isr_ptr;
+}
+
+
+/*
+ * Enables the IRQ on Galileo Chip
+ *
+ * Inputs :
+ * int_cause - The interrupt cause number. In EVB64120 two parameters
+ * are declared, INT_CAUSE_MAIN and INT_CAUSE_HIGH.
+ * bit_num - Indicates which bit number in the cause register
+ *
+ * Outputs :
+ * 1 if succesful, 0 if failure
+ */
+int enable_galileo_irq(int int_cause, int bit_num)
+{
+ if (int_cause == INT_CAUSE_MAIN)
+ SET_REG_BITS(CPU_INTERRUPT_MASK_REGISTER, (1 << bit_num));
+ else if (int_cause == INT_CAUSE_HIGH)
+ SET_REG_BITS(CPU_HIGH_INTERRUPT_MASK_REGISTER,
+ (1 << bit_num));
+ else
+ return 0;
+
+ return 1;
+}
+
+/*
+ * Disables the IRQ on Galileo Chip
+ *
+ * Inputs :
+ * int_cause - The interrupt cause number. In EVB64120 two parameters
+ * are declared, INT_CAUSE_MAIN and INT_CAUSE_HIGH.
+ * bit_num - Indicates which bit number in the cause register
+ *
+ * Outputs :
+ * 1 if succesful, 0 if failure
+ */
+int disable_galileo_irq(int int_cause, int bit_num)
+{
+ if (int_cause == INT_CAUSE_MAIN)
+ RESET_REG_BITS(CPU_INTERRUPT_MASK_REGISTER,
+ (1 << bit_num));
+ else if (int_cause == INT_CAUSE_HIGH)
+ RESET_REG_BITS(CPU_HIGH_INTERRUPT_MASK_REGISTER,
+ (1 << bit_num));
+ else
+ return 0;
+ return 1;
+}
+#endif /* UNUSED */
+
+/*
+ * Interrupt handler for interrupts coming from the Galileo chip via P0_INT#.
+ *
+ * We route the timer interrupt to P0_INT# (IRQ 6), and that's all this
+ * routine can handle, for now.
+ *
+ * In the future, we'll route more interrupts to this pin, and that's why
+ * we keep this particular structure in the function.
+ */
+
+static irqreturn_t gt64240_p0int_irq(int irq, void *dev, struct pt_regs *regs)
+{
+ uint32_t irq_src, irq_src_mask;
+ int handled;
+
+ /* get the low interrupt cause register */
+ irq_src = MV_READ(LOW_INTERRUPT_CAUSE_REGISTER);
+
+ /* get the mask register for this pin */
+ irq_src_mask = MV_READ(PCI_0INTERRUPT_CAUSE_MASK_REGISTER_LOW);
+
+ /* mask off only the interrupts we're interested in */
+ irq_src = irq_src & irq_src_mask;
+
+ handled = IRQ_NONE;
+
+ /* Check for timer interrupt */
+ if (irq_src & 0x00000100) {
+ handled = IRQ_HANDLED;
+ irq_src &= ~0x00000100;
+
+ /* Clear any pending cause bits */
+ MV_WRITE(TIMER_COUNTER_0_3_INTERRUPT_CAUSE, 0x0);
+
+ /* handle the timer call */
+ do_timer(regs);
+#ifndef CONFIG_SMP
+ update_process_times(user_mode(regs));
+#endif
+ }
+
+ if (irq_src) {
+ printk(KERN_INFO
+ "UNKNOWN P0_INT# interrupt received, irq_src=0x%x\n",
+ irq_src);
+ }
+
+ return handled;
+}
+
+/*
+ * Initializes timer using galileo's built in timer.
+ */
+
+/*
+ * This will ignore the standard MIPS timer interrupt handler
+ * that is passed in as *irq (=irq0 in ../kernel/time.c).
+ * We will do our own timer interrupt handling.
+ */
+void gt64240_time_init(void)
+{
+ static struct irqaction timer;
+
+ /* Stop the timer -- we'll use timer #0 */
+ MV_WRITE(TIMER_COUNTER_0_3_CONTROL, 0x0);
+
+ /* Load timer value for 100 Hz */
+ MV_WRITE(TIMER_COUNTER0, bus_clock / 100);
+
+ /*
+ * Create the IRQ structure entry for the timer. Since we're too early
+ * in the boot process to use the "request_irq()" call, we'll hard-code
+ * the values to the correct interrupt line.
+ */
+ timer.handler = &gt64240_p0int_irq;
+ timer.flags = SA_SHIRQ | SA_INTERRUPT;
+ timer.name = "timer";
+ timer.dev_id = NULL;
+ timer.next = NULL;
+ timer.mask = 0;
+ irq_desc[6].action = &timer;
+
+ enable_irq(6);
+
+ /* Clear any pending cause bits */
+ MV_WRITE(TIMER_COUNTER_0_3_INTERRUPT_CAUSE, 0x0);
+
+ /* Enable the interrupt for timer 0 */
+ MV_WRITE(TIMER_COUNTER_0_3_INTERRUPT_MASK, 0x1);
+
+ /* Enable the timer interrupt for GT-64240 pin P0_INT# */
+ MV_WRITE (PCI_0INTERRUPT_CAUSE_MASK_REGISTER_LOW, 0x100);
+
+ /* Configure and start the timer */
+ MV_WRITE(TIMER_COUNTER_0_3_CONTROL, 0x3);
+}
+
+void gt64240_irq_init(void)
+{
+#if CURRENTLY_UNUSED
+ int i, j;
+
+ /* Reset irq handlers pointers to NULL */
+ for (i = 0; i < MAX_CAUSE_REGS; i++) {
+ for (j = 0; j < MAX_CAUSE_REG_WIDTH; j++) {
+ irq_handlers[i][j].next = NULL;
+ irq_handlers[i][j].sync = 0;
+ irq_handlers[i][j].routine = NULL;
+ irq_handlers[i][j].data = NULL;
+ }
+ }
+#endif
+}
diff --git a/arch/mips/momentum/ocelot_g/int-handler.S b/arch/mips/momentum/ocelot_g/int-handler.S
new file mode 100644
index 000000000000..772e8f713176
--- /dev/null
+++ b/arch/mips/momentum/ocelot_g/int-handler.S
@@ -0,0 +1,131 @@
+/*
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: jsun@mvista.com or jsun@junsun.net
+ *
+ * First-level interrupt dispatcher for ocelot board.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#include <asm/asm.h>
+#include <asm/mipsregs.h>
+#include <asm/addrspace.h>
+#include <asm/regdef.h>
+#include <asm/stackframe.h>
+
+/*
+ * first level interrupt dispatcher for ocelot board -
+ * We check for the timer first, then check PCI ints A and D.
+ * Then check for serial IRQ and fall through.
+ */
+ .align 5
+ NESTED(ocelot_handle_int, PT_SIZE, sp)
+ SAVE_ALL
+ CLI
+ .set at
+ mfc0 t0, CP0_CAUSE
+ mfc0 t2, CP0_STATUS
+
+ and t0, t2
+
+ andi t1, t0, STATUSF_IP2 /* int0 hardware line */
+ bnez t1, ll_pri_enet_irq
+ andi t1, t0, STATUSF_IP3 /* int1 hardware line */
+ bnez t1, ll_sec_enet_irq
+ andi t1, t0, STATUSF_IP4 /* int2 hardware line */
+ bnez t1, ll_uart_irq
+ andi t1, t0, STATUSF_IP5 /* int3 hardware line */
+ bnez t1, ll_cpci_irq
+ andi t1, t0, STATUSF_IP6 /* int4 hardware line */
+ bnez t1, ll_galileo_p0_irq
+ andi t1, t0, STATUSF_IP7 /* cpu timer */
+ bnez t1, ll_cputimer_irq
+
+ /* now look at the extended interrupts */
+ mfc0 t0, CP0_CAUSE
+ cfc0 t1, CP0_S1_INTCONTROL
+
+ /* shift the mask 8 bits left to line up the bits */
+ sll t2, t1, 8
+
+ and t0, t2
+ srl t0, t0, 16
+
+ andi t1, t0, STATUSF_IP8 /* int6 hardware line */
+ bnez t1, ll_galileo_p1_irq
+ andi t1, t0, STATUSF_IP9 /* int7 hardware line */
+ bnez t1, ll_pmc_irq
+ andi t1, t0, STATUSF_IP10 /* int8 hardware line */
+ bnez t1, ll_cpci_abcd_irq
+ andi t1, t0, STATUSF_IP11 /* int9 hardware line */
+ bnez t1, ll_testpoint_irq
+
+ .set reorder
+
+ /* wrong alarm or masked ... */
+ j spurious_interrupt
+ nop
+ END(ocelot_handle_int)
+
+ .align 5
+ll_pri_enet_irq:
+ li a0, 2
+ move a1, sp
+ jal do_IRQ
+ j ret_from_irq
+
+ll_sec_enet_irq:
+ li a0, 3
+ move a1, sp
+ jal do_IRQ
+ j ret_from_irq
+
+ll_uart_irq:
+ li a0, 4
+ move a1, sp
+ jal do_IRQ
+ j ret_from_irq
+
+ll_cpci_irq:
+ li a0, 5
+ move a1, sp
+ jal do_IRQ
+ j ret_from_irq
+
+ll_galileo_p0_irq:
+ li a0, 6
+ move a1, sp
+ jal do_IRQ
+ j ret_from_irq
+
+ll_cputimer_irq:
+ li a0, 7
+ move a1, sp
+ jal do_IRQ
+ j ret_from_irq
+
+ll_galileo_p1_irq:
+ li a0, 8
+ move a1, sp
+ jal do_IRQ
+ j ret_from_irq
+
+ll_pmc_irq:
+ li a0, 9
+ move a1, sp
+ jal do_IRQ
+ j ret_from_irq
+
+ll_cpci_abcd_irq:
+ li a0, 10
+ move a1, sp
+ jal do_IRQ
+ j ret_from_irq
+
+ll_testpoint_irq:
+ li a0, 11
+ move a1, sp
+ jal do_IRQ
+ j ret_from_irq
diff --git a/arch/mips/momentum/ocelot_g/irq.c b/arch/mips/momentum/ocelot_g/irq.c
new file mode 100644
index 000000000000..5eb85b164205
--- /dev/null
+++ b/arch/mips/momentum/ocelot_g/irq.c
@@ -0,0 +1,69 @@
+/*
+ * Copyright (C) 2000 RidgeRun, Inc.
+ * Author: RidgeRun, Inc.
+ * glonnon@ridgerun.com, skranz@ridgerun.com, stevej@ridgerun.com
+ *
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
+ * Copyright (C) 2000, 01, 05 Ralf Baechle (ralf@linux-mips.org)
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/kernel_stat.h>
+#include <linux/module.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/timex.h>
+#include <linux/slab.h>
+#include <linux/random.h>
+#include <linux/bitops.h>
+#include <asm/bootinfo.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/irq_cpu.h>
+#include <asm/mipsregs.h>
+#include <asm/system.h>
+
+extern asmlinkage void ocelot_handle_int(void);
+extern void gt64240_irq_init(void);
+
+void __init arch_init_irq(void)
+{
+ /*
+ * Clear all of the interrupts while we change the able around a bit.
+ * int-handler is not on bootstrap
+ */
+ clear_c0_status(ST0_IM);
+ local_irq_disable();
+
+ /* Sets the first-level interrupt dispatcher. */
+ set_except_vector(0, ocelot_handle_int);
+ mips_cpu_irq_init(0);
+ rm7k_cpu_irq_init(8);
+
+ gt64240_irq_init();
+}
diff --git a/arch/mips/momentum/ocelot_g/ocelot_pld.h b/arch/mips/momentum/ocelot_g/ocelot_pld.h
new file mode 100644
index 000000000000..fcb8275e219d
--- /dev/null
+++ b/arch/mips/momentum/ocelot_g/ocelot_pld.h
@@ -0,0 +1,30 @@
+/*
+ * Ocelot Board Register Definitions
+ *
+ * (C) 2001 Red Hat, Inc.
+ *
+ * GPL'd
+ */
+#ifndef __MOMENCO_OCELOT_PLD_H__
+#define __MOMENCO_OCELOT_PLD_H__
+
+#define OCELOT_CS0_ADDR (0xfc000000)
+
+#define OCELOT_REG_BOARDREV (0)
+#define OCELOT_REG_PLD1_ID (1)
+#define OCELOT_REG_PLD2_ID (2)
+#define OCELOT_REG_RESET_STATUS (3)
+#define OCELOT_REG_BOARD_STATUS (4)
+#define OCELOT_REG_CPCI_ID (5)
+#define OCELOT_REG_I2C_CTRL (8)
+#define OCELOT_REG_EEPROM_MODE (9)
+#define OCELOT_REG_INTMASK (10)
+#define OCELOT_REG_INTSTATUS (11)
+#define OCELOT_REG_INTSET (12)
+#define OCELOT_REG_INTCLR (13)
+
+#define OCELOT_PLD_WRITE(x, y) writeb(x, OCELOT_CS0_ADDR + OCELOT_REG_##y)
+#define OCELOT_PLD_READ(x) readb(OCELOT_CS0_ADDR + OCELOT_REG_##x)
+
+
+#endif /* __MOMENCO_OCELOT_PLD_H__ */
diff --git a/arch/mips/momentum/ocelot_g/prom.c b/arch/mips/momentum/ocelot_g/prom.c
new file mode 100644
index 000000000000..6b4f577c2757
--- /dev/null
+++ b/arch/mips/momentum/ocelot_g/prom.c
@@ -0,0 +1,86 @@
+/*
+ * Copyright 2002 Momentum Computer Inc.
+ * Author: Matthew Dharm <mdharm@momenco.com>
+ *
+ * Based on Ocelot Linux port, which is
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: jsun@mvista.com or jsun@junsun.net
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/bootmem.h>
+
+#include <asm/addrspace.h>
+#include <asm/bootinfo.h>
+#include <asm/pmon.h>
+#include <asm/gt64240.h>
+
+#include "ocelot_pld.h"
+
+struct callvectors* debug_vectors;
+
+extern unsigned long marvell_base;
+extern unsigned long bus_clock;
+
+#ifdef CONFIG_GALILLEO_GT64240_ETH
+extern unsigned char prom_mac_addr_base[6];
+#endif
+
+const char *get_system_type(void)
+{
+ return "Momentum Ocelot";
+}
+
+void __init prom_init(void)
+{
+ int argc = fw_arg0;
+ char **arg = (char **) fw_arg1;
+ char **env = (char **) fw_arg2;
+ struct callvectors *cv = (struct callvectors *) fw_arg3;
+ int i;
+
+ /* save the PROM vectors for debugging use */
+ debug_vectors = cv;
+
+ /* arg[0] is "g", the rest is boot parameters */
+ arcs_cmdline[0] = '\0';
+ for (i = 1; i < argc; i++) {
+ if (strlen(arcs_cmdline) + strlen(arg[i] + 1)
+ >= sizeof(arcs_cmdline))
+ break;
+ strcat(arcs_cmdline, arg[i]);
+ strcat(arcs_cmdline, " ");
+ }
+
+ mips_machgroup = MACH_GROUP_MOMENCO;
+ mips_machtype = MACH_MOMENCO_OCELOT_G;
+
+#ifdef CONFIG_GALILLEO_GT64240_ETH
+ /* get the base MAC address for on-board ethernet ports */
+ memcpy(prom_mac_addr_base, (void*)0xfc807cf2, 6);
+#endif
+
+ while (*env) {
+ if (strncmp("gtbase", *env, strlen("gtbase")) == 0) {
+ marvell_base = simple_strtol(*env + strlen("gtbase="),
+ NULL, 16);
+ }
+ if (strncmp("busclock", *env, strlen("busclock")) == 0) {
+ bus_clock = simple_strtol(*env + strlen("busclock="),
+ NULL, 10);
+ }
+ env++;
+ }
+}
+
+unsigned long __init prom_free_prom_memory(void)
+{
+ return 0;
+}
diff --git a/arch/mips/momentum/ocelot_g/reset.c b/arch/mips/momentum/ocelot_g/reset.c
new file mode 100644
index 000000000000..3fd499adf4cf
--- /dev/null
+++ b/arch/mips/momentum/ocelot_g/reset.c
@@ -0,0 +1,47 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * Copyright (C) 1997, 2001 Ralf Baechle
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: jsun@mvista.com or jsun@junsun.net
+ */
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <asm/io.h>
+#include <asm/pgtable.h>
+#include <asm/processor.h>
+#include <asm/reboot.h>
+#include <asm/system.h>
+#include <linux/delay.h>
+
+void momenco_ocelot_restart(char *command)
+{
+ void *nvram = ioremap_nocache(0x2c807000, 0x1000);
+
+ if (!nvram) {
+ printk(KERN_NOTICE "ioremap of reset register failed\n");
+ return;
+ }
+ writeb(0x84, nvram + 0xff7); /* Ask the NVRAM/RTC/watchdog chip to
+ assert reset in 1/16 second */
+ mdelay(10+(1000/16));
+ iounmap(nvram);
+ printk(KERN_NOTICE "Watchdog reset failed\n");
+}
+
+void momenco_ocelot_halt(void)
+{
+ printk(KERN_NOTICE "\n** You can safely turn off the power\n");
+ while (1)
+ __asm__(".set\tmips3\n\t"
+ "wait\n\t"
+ ".set\tmips0");
+}
+
+void momenco_ocelot_power_off(void)
+{
+ momenco_ocelot_halt();
+}
diff --git a/arch/mips/momentum/ocelot_g/setup.c b/arch/mips/momentum/ocelot_g/setup.c
new file mode 100644
index 000000000000..38a78ab8c830
--- /dev/null
+++ b/arch/mips/momentum/ocelot_g/setup.c
@@ -0,0 +1,266 @@
+/*
+ * BRIEF MODULE DESCRIPTION
+ * Momentum Computer Ocelot-G (CP7000G) - board dependent boot routines
+ *
+ * Copyright (C) 1996, 1997, 2001 Ralf Baechle
+ * Copyright (C) 2000 RidgeRun, Inc.
+ * Copyright (C) 2001 Red Hat, Inc.
+ * Copyright (C) 2002 Momentum Computer
+ *
+ * Author: Matthew Dharm, Momentum Computer
+ * mdharm@momenco.com
+ *
+ * Author: RidgeRun, Inc.
+ * glonnon@ridgerun.com, skranz@ridgerun.com, stevej@ridgerun.com
+ *
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: jsun@mvista.com or jsun@junsun.net
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <linux/swap.h>
+#include <linux/ioport.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/timex.h>
+#include <linux/vmalloc.h>
+#include <asm/time.h>
+#include <asm/bootinfo.h>
+#include <asm/page.h>
+#include <asm/io.h>
+#include <asm/gt64240.h>
+#include <asm/irq.h>
+#include <asm/pci.h>
+#include <asm/processor.h>
+#include <asm/ptrace.h>
+#include <asm/reboot.h>
+#include <linux/bootmem.h>
+
+#include "ocelot_pld.h"
+
+#ifdef CONFIG_GALILLEO_GT64240_ETH
+extern unsigned char prom_mac_addr_base[6];
+#endif
+
+unsigned long marvell_base;
+
+/* These functions are used for rebooting or halting the machine*/
+extern void momenco_ocelot_restart(char *command);
+extern void momenco_ocelot_halt(void);
+extern void momenco_ocelot_power_off(void);
+
+extern void gt64240_time_init(void);
+extern void momenco_ocelot_irq_setup(void);
+
+static char reset_reason;
+
+static unsigned long ENTRYLO(unsigned long paddr)
+{
+ return ((paddr & PAGE_MASK) |
+ (_PAGE_PRESENT | __READABLE | __WRITEABLE | _PAGE_GLOBAL |
+ _CACHE_UNCACHED)) >> 6;
+}
+
+/* setup code for a handoff from a version 2 PMON 2000 PROM */
+void PMON_v2_setup(void)
+{
+ /* A wired TLB entry for the GT64240 and the serial port. The
+ GT64240 is going to be hit on every IRQ anyway - there's
+ absolutely no point in letting it be a random TLB entry, as
+ it'll just cause needless churning of the TLB. And we use
+ the other half for the serial port, which is just a PITA
+ otherwise :)
+
+ Device Physical Virtual
+ GT64240 Internal Regs 0xf4000000 0xe0000000
+ UARTs (CS2) 0xfd000000 0xe0001000
+ */
+ add_wired_entry(ENTRYLO(0xf4000000), ENTRYLO(0xf4010000),
+ 0xf4000000, PM_64K);
+ add_wired_entry(ENTRYLO(0xfd000000), ENTRYLO(0xfd001000),
+ 0xfd000000, PM_4K);
+
+ /* Also a temporary entry to let us talk to the Ocelot PLD and NVRAM
+ in the CS[012] region. We can't use ioremap() yet. The NVRAM
+ is a ST M48T37Y, which includes NVRAM, RTC, and Watchdog functions.
+
+ Ocelot PLD (CS0) 0xfc000000 0xe0020000
+ NVRAM (CS1) 0xfc800000 0xe0030000
+ */
+ add_temporary_entry(ENTRYLO(0xfc000000), ENTRYLO(0xfc010000),
+ 0xfc000000, PM_64K);
+ add_temporary_entry(ENTRYLO(0xfc800000), ENTRYLO(0xfc810000),
+ 0xfc800000, PM_64K);
+
+ marvell_base = 0xf4000000;
+}
+
+extern int rm7k_tcache_enabled;
+
+/*
+ * This runs in KSEG1. See the verbiage in rm7k.c::probe_scache()
+ */
+#define Page_Invalidate_T 0x16
+static void __init setup_l3cache(unsigned long size)
+{
+ int register i;
+
+ printk("Enabling L3 cache...");
+
+ /* Enable the L3 cache in the GT64120A's CPU Configuration register */
+ MV_WRITE(0, MV_READ(0) | (1<<14));
+
+ /* Enable the L3 cache in the CPU */
+ set_c0_config(1<<12 /* CONF_TE */);
+
+ /* Clear the cache */
+ write_c0_taglo(0);
+ write_c0_taghi(0);
+
+ for (i=0; i < size; i+= 4096) {
+ __asm__ __volatile__ (
+ ".set noreorder\n\t"
+ ".set mips3\n\t"
+ "cache %1, (%0)\n\t"
+ ".set mips0\n\t"
+ ".set reorder"
+ :
+ : "r" (KSEG0ADDR(i)),
+ "i" (Page_Invalidate_T));
+ }
+
+ /* Let the RM7000 MM code know that the tertiary cache is enabled */
+ rm7k_tcache_enabled = 1;
+
+ printk("Done\n");
+}
+
+static int __init momenco_ocelot_g_setup(void)
+{
+ void (*l3func)(unsigned long) = (void *) KSEG1ADDR(setup_l3cache);
+ unsigned int tmpword;
+
+ board_time_init = gt64240_time_init;
+
+ _machine_restart = momenco_ocelot_restart;
+ _machine_halt = momenco_ocelot_halt;
+ _machine_power_off = momenco_ocelot_power_off;
+
+ /*
+ * initrd_start = (ulong)ocelot_initrd_start;
+ * initrd_end = (ulong)ocelot_initrd_start + (ulong)ocelot_initrd_size;
+ * initrd_below_start_ok = 1;
+ */
+
+ /* do handoff reconfiguration */
+ PMON_v2_setup();
+
+#ifdef CONFIG_GALILLEO_GT64240_ETH
+ /* get the mac addr */
+ memcpy(prom_mac_addr_base, (void*)0xfc807cf2, 6);
+#endif
+
+ /* Turn off the Bit-Error LED */
+ OCELOT_PLD_WRITE(0x80, INTCLR);
+
+ tmpword = OCELOT_PLD_READ(BOARDREV);
+ if (tmpword < 26)
+ printk("Momenco Ocelot-G: Board Assembly Rev. %c\n", 'A'+tmpword);
+ else
+ printk("Momenco Ocelot-G: Board Assembly Revision #0x%x\n", tmpword);
+
+ tmpword = OCELOT_PLD_READ(PLD1_ID);
+ printk("PLD 1 ID: %d.%d\n", tmpword>>4, tmpword&15);
+ tmpword = OCELOT_PLD_READ(PLD2_ID);
+ printk("PLD 2 ID: %d.%d\n", tmpword>>4, tmpword&15);
+ tmpword = OCELOT_PLD_READ(RESET_STATUS);
+ printk("Reset reason: 0x%x\n", tmpword);
+ reset_reason = tmpword;
+ OCELOT_PLD_WRITE(0xff, RESET_STATUS);
+
+ tmpword = OCELOT_PLD_READ(BOARD_STATUS);
+ printk("Board Status register: 0x%02x\n", tmpword);
+ printk(" - User jumper: %s\n", (tmpword & 0x80)?"installed":"absent");
+ printk(" - Boot flash write jumper: %s\n", (tmpword&0x40)?"installed":"absent");
+ printk(" - Tulip PHY %s connected\n", (tmpword&0x10)?"is":"not");
+ printk(" - L3 Cache size: %d MiB\n", (1<<((tmpword&12) >> 2))&~1);
+ printk(" - SDRAM size: %d MiB\n", 1<<(6+(tmpword&3)));
+
+ if (tmpword&12)
+ l3func((1<<(((tmpword&12) >> 2)+20)));
+
+ switch(tmpword &3) {
+ case 3:
+ /* 512MiB -- two banks of 256MiB */
+ add_memory_region( 0x0<<20, 0x100<<20, BOOT_MEM_RAM);
+/*
+ add_memory_region(0x100<<20, 0x100<<20, BOOT_MEM_RAM);
+*/
+ break;
+ case 2:
+ /* 256MiB -- two banks of 128MiB */
+ add_memory_region( 0x0<<20, 0x80<<20, BOOT_MEM_RAM);
+ add_memory_region(0x80<<20, 0x80<<20, BOOT_MEM_RAM);
+ break;
+ case 1:
+ /* 128MiB -- 64MiB per bank */
+ add_memory_region( 0x0<<20, 0x40<<20, BOOT_MEM_RAM);
+ add_memory_region(0x40<<20, 0x40<<20, BOOT_MEM_RAM);
+ break;
+ case 0:
+ /* 64MiB */
+ add_memory_region( 0x0<<20, 0x40<<20, BOOT_MEM_RAM);
+ break;
+ }
+
+ /* FIXME: Fix up the DiskOnChip mapping */
+ MV_WRITE(0x468, 0xfef73);
+
+ return 0;
+}
+
+early_initcall(momenco_ocelot_g_setup);
+
+/* This needs to be one of the first initcalls, because no I/O port access
+ can work before this */
+
+static int io_base_ioremap(void)
+{
+ /* we're mapping PCI accesses from 0xc0000000 to 0xf0000000 */
+ unsigned long io_remap_range;
+
+ io_remap_range = (unsigned long) ioremap(0xc0000000, 0x30000000);
+ if (!io_remap_range)
+ panic("Could not ioremap I/O port range");
+
+ set_io_port_base(io_remap_range - 0xc0000000);
+
+ return 0;
+}
+
+module_init(io_base_ioremap);
OpenPOWER on IntegriCloud