diff options
Diffstat (limited to 'arch/mips/momentum/ocelot_g/setup.c')
| -rw-r--r-- | arch/mips/momentum/ocelot_g/setup.c | 266 |
1 files changed, 266 insertions, 0 deletions
diff --git a/arch/mips/momentum/ocelot_g/setup.c b/arch/mips/momentum/ocelot_g/setup.c new file mode 100644 index 000000000000..38a78ab8c830 --- /dev/null +++ b/arch/mips/momentum/ocelot_g/setup.c @@ -0,0 +1,266 @@ +/* + * BRIEF MODULE DESCRIPTION + * Momentum Computer Ocelot-G (CP7000G) - board dependent boot routines + * + * Copyright (C) 1996, 1997, 2001 Ralf Baechle + * Copyright (C) 2000 RidgeRun, Inc. + * Copyright (C) 2001 Red Hat, Inc. + * Copyright (C) 2002 Momentum Computer + * + * Author: Matthew Dharm, Momentum Computer + * mdharm@momenco.com + * + * Author: RidgeRun, Inc. + * glonnon@ridgerun.com, skranz@ridgerun.com, stevej@ridgerun.com + * + * Copyright 2001 MontaVista Software Inc. + * Author: jsun@mvista.com or jsun@junsun.net + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ +#include <linux/config.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/mm.h> +#include <linux/swap.h> +#include <linux/ioport.h> +#include <linux/sched.h> +#include <linux/interrupt.h> +#include <linux/pci.h> +#include <linux/timex.h> +#include <linux/vmalloc.h> +#include <asm/time.h> +#include <asm/bootinfo.h> +#include <asm/page.h> +#include <asm/io.h> +#include <asm/gt64240.h> +#include <asm/irq.h> +#include <asm/pci.h> +#include <asm/processor.h> +#include <asm/ptrace.h> +#include <asm/reboot.h> +#include <linux/bootmem.h> + +#include "ocelot_pld.h" + +#ifdef CONFIG_GALILLEO_GT64240_ETH +extern unsigned char prom_mac_addr_base[6]; +#endif + +unsigned long marvell_base; + +/* These functions are used for rebooting or halting the machine*/ +extern void momenco_ocelot_restart(char *command); +extern void momenco_ocelot_halt(void); +extern void momenco_ocelot_power_off(void); + +extern void gt64240_time_init(void); +extern void momenco_ocelot_irq_setup(void); + +static char reset_reason; + +static unsigned long ENTRYLO(unsigned long paddr) +{ + return ((paddr & PAGE_MASK) | + (_PAGE_PRESENT | __READABLE | __WRITEABLE | _PAGE_GLOBAL | + _CACHE_UNCACHED)) >> 6; +} + +/* setup code for a handoff from a version 2 PMON 2000 PROM */ +void PMON_v2_setup(void) +{ + /* A wired TLB entry for the GT64240 and the serial port. The + GT64240 is going to be hit on every IRQ anyway - there's + absolutely no point in letting it be a random TLB entry, as + it'll just cause needless churning of the TLB. And we use + the other half for the serial port, which is just a PITA + otherwise :) + + Device Physical Virtual + GT64240 Internal Regs 0xf4000000 0xe0000000 + UARTs (CS2) 0xfd000000 0xe0001000 + */ + add_wired_entry(ENTRYLO(0xf4000000), ENTRYLO(0xf4010000), + 0xf4000000, PM_64K); + add_wired_entry(ENTRYLO(0xfd000000), ENTRYLO(0xfd001000), + 0xfd000000, PM_4K); + + /* Also a temporary entry to let us talk to the Ocelot PLD and NVRAM + in the CS[012] region. We can't use ioremap() yet. The NVRAM + is a ST M48T37Y, which includes NVRAM, RTC, and Watchdog functions. + + Ocelot PLD (CS0) 0xfc000000 0xe0020000 + NVRAM (CS1) 0xfc800000 0xe0030000 + */ + add_temporary_entry(ENTRYLO(0xfc000000), ENTRYLO(0xfc010000), + 0xfc000000, PM_64K); + add_temporary_entry(ENTRYLO(0xfc800000), ENTRYLO(0xfc810000), + 0xfc800000, PM_64K); + + marvell_base = 0xf4000000; +} + +extern int rm7k_tcache_enabled; + +/* + * This runs in KSEG1. See the verbiage in rm7k.c::probe_scache() + */ +#define Page_Invalidate_T 0x16 +static void __init setup_l3cache(unsigned long size) +{ + int register i; + + printk("Enabling L3 cache..."); + + /* Enable the L3 cache in the GT64120A's CPU Configuration register */ + MV_WRITE(0, MV_READ(0) | (1<<14)); + + /* Enable the L3 cache in the CPU */ + set_c0_config(1<<12 /* CONF_TE */); + + /* Clear the cache */ + write_c0_taglo(0); + write_c0_taghi(0); + + for (i=0; i < size; i+= 4096) { + __asm__ __volatile__ ( + ".set noreorder\n\t" + ".set mips3\n\t" + "cache %1, (%0)\n\t" + ".set mips0\n\t" + ".set reorder" + : + : "r" (KSEG0ADDR(i)), + "i" (Page_Invalidate_T)); + } + + /* Let the RM7000 MM code know that the tertiary cache is enabled */ + rm7k_tcache_enabled = 1; + + printk("Done\n"); +} + +static int __init momenco_ocelot_g_setup(void) +{ + void (*l3func)(unsigned long) = (void *) KSEG1ADDR(setup_l3cache); + unsigned int tmpword; + + board_time_init = gt64240_time_init; + + _machine_restart = momenco_ocelot_restart; + _machine_halt = momenco_ocelot_halt; + _machine_power_off = momenco_ocelot_power_off; + + /* + * initrd_start = (ulong)ocelot_initrd_start; + * initrd_end = (ulong)ocelot_initrd_start + (ulong)ocelot_initrd_size; + * initrd_below_start_ok = 1; + */ + + /* do handoff reconfiguration */ + PMON_v2_setup(); + +#ifdef CONFIG_GALILLEO_GT64240_ETH + /* get the mac addr */ + memcpy(prom_mac_addr_base, (void*)0xfc807cf2, 6); +#endif + + /* Turn off the Bit-Error LED */ + OCELOT_PLD_WRITE(0x80, INTCLR); + + tmpword = OCELOT_PLD_READ(BOARDREV); + if (tmpword < 26) + printk("Momenco Ocelot-G: Board Assembly Rev. %c\n", 'A'+tmpword); + else + printk("Momenco Ocelot-G: Board Assembly Revision #0x%x\n", tmpword); + + tmpword = OCELOT_PLD_READ(PLD1_ID); + printk("PLD 1 ID: %d.%d\n", tmpword>>4, tmpword&15); + tmpword = OCELOT_PLD_READ(PLD2_ID); + printk("PLD 2 ID: %d.%d\n", tmpword>>4, tmpword&15); + tmpword = OCELOT_PLD_READ(RESET_STATUS); + printk("Reset reason: 0x%x\n", tmpword); + reset_reason = tmpword; + OCELOT_PLD_WRITE(0xff, RESET_STATUS); + + tmpword = OCELOT_PLD_READ(BOARD_STATUS); + printk("Board Status register: 0x%02x\n", tmpword); + printk(" - User jumper: %s\n", (tmpword & 0x80)?"installed":"absent"); + printk(" - Boot flash write jumper: %s\n", (tmpword&0x40)?"installed":"absent"); + printk(" - Tulip PHY %s connected\n", (tmpword&0x10)?"is":"not"); + printk(" - L3 Cache size: %d MiB\n", (1<<((tmpword&12) >> 2))&~1); + printk(" - SDRAM size: %d MiB\n", 1<<(6+(tmpword&3))); + + if (tmpword&12) + l3func((1<<(((tmpword&12) >> 2)+20))); + + switch(tmpword &3) { + case 3: + /* 512MiB -- two banks of 256MiB */ + add_memory_region( 0x0<<20, 0x100<<20, BOOT_MEM_RAM); +/* + add_memory_region(0x100<<20, 0x100<<20, BOOT_MEM_RAM); +*/ + break; + case 2: + /* 256MiB -- two banks of 128MiB */ + add_memory_region( 0x0<<20, 0x80<<20, BOOT_MEM_RAM); + add_memory_region(0x80<<20, 0x80<<20, BOOT_MEM_RAM); + break; + case 1: + /* 128MiB -- 64MiB per bank */ + add_memory_region( 0x0<<20, 0x40<<20, BOOT_MEM_RAM); + add_memory_region(0x40<<20, 0x40<<20, BOOT_MEM_RAM); + break; + case 0: + /* 64MiB */ + add_memory_region( 0x0<<20, 0x40<<20, BOOT_MEM_RAM); + break; + } + + /* FIXME: Fix up the DiskOnChip mapping */ + MV_WRITE(0x468, 0xfef73); + + return 0; +} + +early_initcall(momenco_ocelot_g_setup); + +/* This needs to be one of the first initcalls, because no I/O port access + can work before this */ + +static int io_base_ioremap(void) +{ + /* we're mapping PCI accesses from 0xc0000000 to 0xf0000000 */ + unsigned long io_remap_range; + + io_remap_range = (unsigned long) ioremap(0xc0000000, 0x30000000); + if (!io_remap_range) + panic("Could not ioremap I/O port range"); + + set_io_port_base(io_remap_range - 0xc0000000); + + return 0; +} + +module_init(io_base_ioremap); |
