diff options
Diffstat (limited to 'arch/mips/kernel/smp-mt.c')
| -rw-r--r-- | arch/mips/kernel/smp-mt.c | 154 |
1 files changed, 85 insertions, 69 deletions
diff --git a/arch/mips/kernel/smp-mt.c b/arch/mips/kernel/smp-mt.c index 3b5f3b632622..2ac19a6cbf68 100644 --- a/arch/mips/kernel/smp-mt.c +++ b/arch/mips/kernel/smp-mt.c @@ -140,15 +140,90 @@ static struct irqaction irq_call = { .name = "IPI_call" }; +static void __init smp_copy_vpe_config(void) +{ + write_vpe_c0_status( + (read_c0_status() & ~(ST0_IM | ST0_IE | ST0_KSU)) | ST0_CU0); + + /* set config to be the same as vpe0, particularly kseg0 coherency alg */ + write_vpe_c0_config( read_c0_config()); + + /* make sure there are no software interrupts pending */ + write_vpe_c0_cause(0); + + /* Propagate Config7 */ + write_vpe_c0_config7(read_c0_config7()); + + write_vpe_c0_count(read_c0_count()); +} + +static unsigned int __init smp_vpe_init(unsigned int tc, unsigned int mvpconf0, + unsigned int ncpu) +{ + if (tc > ((mvpconf0 & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT)) + return ncpu; + + /* Deactivate all but VPE 0 */ + if (tc != 0) { + unsigned long tmp = read_vpe_c0_vpeconf0(); + + tmp &= ~VPECONF0_VPA; + + /* master VPE */ + tmp |= VPECONF0_MVP; + write_vpe_c0_vpeconf0(tmp); + + /* Record this as available CPU */ + cpu_set(tc, phys_cpu_present_map); + __cpu_number_map[tc] = ++ncpu; + __cpu_logical_map[ncpu] = tc; + } + + /* Disable multi-threading with TC's */ + write_vpe_c0_vpecontrol(read_vpe_c0_vpecontrol() & ~VPECONTROL_TE); + + if (tc != 0) + smp_copy_vpe_config(); + + return ncpu; +} + +static void __init smp_tc_init(unsigned int tc, unsigned int mvpconf0) +{ + unsigned long tmp; + + if (!tc) + return; + + /* bind a TC to each VPE, May as well put all excess TC's + on the last VPE */ + if (tc >= (((mvpconf0 & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT)+1)) + write_tc_c0_tcbind(read_tc_c0_tcbind() | ((mvpconf0 & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT)); + else { + write_tc_c0_tcbind(read_tc_c0_tcbind() | tc); + + /* and set XTC */ + write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() | (tc << VPECONF0_XTC_SHIFT)); + } + + tmp = read_tc_c0_tcstatus(); + + /* mark not allocated and not dynamically allocatable */ + tmp &= ~(TCSTATUS_A | TCSTATUS_DA); + tmp |= TCSTATUS_IXMT; /* interrupt exempt */ + write_tc_c0_tcstatus(tmp); + + write_tc_c0_tchalt(TCHALT_H); +} + /* * Common setup before any secondaries are started * Make sure all CPU's are in a sensible state before we boot any of the * secondarys */ -void plat_smp_setup(void) +void __init plat_smp_setup(void) { - unsigned long val; - int i, num; + unsigned int mvpconf0, ntc, tc, ncpu = 0; #ifdef CONFIG_MIPS_MT_FPAFF /* If we have an FPU, enroll ourselves in the FPU-full mask */ @@ -167,75 +242,16 @@ void plat_smp_setup(void) /* Put MVPE's into 'configuration state' */ set_c0_mvpcontrol(MVPCONTROL_VPC); - val = read_c0_mvpconf0(); + mvpconf0 = read_c0_mvpconf0(); + ntc = (mvpconf0 & MVPCONF0_PTC) >> MVPCONF0_PTC_SHIFT; /* we'll always have more TC's than VPE's, so loop setting everything to a sensible state */ - for (i = 0, num = 0; i <= ((val & MVPCONF0_PTC) >> MVPCONF0_PTC_SHIFT); i++) { - settc(i); - - /* VPE's */ - if (i <= ((val & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT)) { - - /* deactivate all but vpe0 */ - if (i != 0) { - unsigned long tmp = read_vpe_c0_vpeconf0(); - - tmp &= ~VPECONF0_VPA; - - /* master VPE */ - tmp |= VPECONF0_MVP; - write_vpe_c0_vpeconf0(tmp); - - /* Record this as available CPU */ - cpu_set(i, phys_cpu_present_map); - __cpu_number_map[i] = ++num; - __cpu_logical_map[num] = i; - } - - /* disable multi-threading with TC's */ - write_vpe_c0_vpecontrol(read_vpe_c0_vpecontrol() & ~VPECONTROL_TE); - - if (i != 0) { - write_vpe_c0_status((read_c0_status() & ~(ST0_IM | ST0_IE | ST0_KSU)) | ST0_CU0); + for (tc = 0; tc <= ntc; tc++) { + settc(tc); - /* set config to be the same as vpe0, particularly kseg0 coherency alg */ - write_vpe_c0_config( read_c0_config()); - - /* make sure there are no software interrupts pending */ - write_vpe_c0_cause(0); - - /* Propagate Config7 */ - write_vpe_c0_config7(read_c0_config7()); - } - - } - - /* TC's */ - - if (i != 0) { - unsigned long tmp; - - /* bind a TC to each VPE, May as well put all excess TC's - on the last VPE */ - if ( i >= (((val & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT)+1) ) - write_tc_c0_tcbind(read_tc_c0_tcbind() | ((val & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT) ); - else { - write_tc_c0_tcbind( read_tc_c0_tcbind() | i); - - /* and set XTC */ - write_vpe_c0_vpeconf0( read_vpe_c0_vpeconf0() | (i << VPECONF0_XTC_SHIFT)); - } - - tmp = read_tc_c0_tcstatus(); - - /* mark not allocated and not dynamically allocatable */ - tmp &= ~(TCSTATUS_A | TCSTATUS_DA); - tmp |= TCSTATUS_IXMT; /* interrupt exempt */ - write_tc_c0_tcstatus(tmp); - - write_tc_c0_tchalt(TCHALT_H); - } + smp_tc_init(tc, mvpconf0); + ncpu = smp_vpe_init(tc, mvpconf0, ncpu); } /* Release config state */ @@ -243,7 +259,7 @@ void plat_smp_setup(void) /* We'll wait until starting the secondaries before starting MVPE */ - printk(KERN_INFO "Detected %i available secondary CPU(s)\n", num); + printk(KERN_INFO "Detected %i available secondary CPU(s)\n", ncpu); } void __init plat_prepare_cpus(unsigned int max_cpus) |
