summaryrefslogtreecommitdiffstats
path: root/arch/mips/include/asm/octeon/cvmx-fpa.h
diff options
context:
space:
mode:
Diffstat (limited to 'arch/mips/include/asm/octeon/cvmx-fpa.h')
-rw-r--r--arch/mips/include/asm/octeon/cvmx-fpa.h299
1 files changed, 299 insertions, 0 deletions
diff --git a/arch/mips/include/asm/octeon/cvmx-fpa.h b/arch/mips/include/asm/octeon/cvmx-fpa.h
new file mode 100644
index 000000000000..1f04f9658736
--- /dev/null
+++ b/arch/mips/include/asm/octeon/cvmx-fpa.h
@@ -0,0 +1,299 @@
+/***********************license start***************
+ * Author: Cavium Networks
+ *
+ * Contact: support@caviumnetworks.com
+ * This file is part of the OCTEON SDK
+ *
+ * Copyright (c) 2003-2008 Cavium Networks
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, Version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful, but
+ * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
+ * NONINFRINGEMENT. See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this file; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ * or visit http://www.gnu.org/licenses/.
+ *
+ * This file may also be available under a different license from Cavium.
+ * Contact Cavium Networks for more information
+ ***********************license end**************************************/
+
+/**
+ * @file
+ *
+ * Interface to the hardware Free Pool Allocator.
+ *
+ *
+ */
+
+#ifndef __CVMX_FPA_H__
+#define __CVMX_FPA_H__
+
+#include "cvmx-address.h"
+#include "cvmx-fpa-defs.h"
+
+#define CVMX_FPA_NUM_POOLS 8
+#define CVMX_FPA_MIN_BLOCK_SIZE 128
+#define CVMX_FPA_ALIGNMENT 128
+
+/**
+ * Structure describing the data format used for stores to the FPA.
+ */
+typedef union {
+ uint64_t u64;
+ struct {
+ /*
+ * the (64-bit word) location in scratchpad to write
+ * to (if len != 0)
+ */
+ uint64_t scraddr:8;
+ /* the number of words in the response (0 => no response) */
+ uint64_t len:8;
+ /* the ID of the device on the non-coherent bus */
+ uint64_t did:8;
+ /*
+ * the address that will appear in the first tick on
+ * the NCB bus.
+ */
+ uint64_t addr:40;
+ } s;
+} cvmx_fpa_iobdma_data_t;
+
+/**
+ * Structure describing the current state of a FPA pool.
+ */
+typedef struct {
+ /* Name it was created under */
+ const char *name;
+ /* Size of each block */
+ uint64_t size;
+ /* The base memory address of whole block */
+ void *base;
+ /* The number of elements in the pool at creation */
+ uint64_t starting_element_count;
+} cvmx_fpa_pool_info_t;
+
+/**
+ * Current state of all the pools. Use access functions
+ * instead of using it directly.
+ */
+extern cvmx_fpa_pool_info_t cvmx_fpa_pool_info[CVMX_FPA_NUM_POOLS];
+
+/* CSR typedefs have been moved to cvmx-csr-*.h */
+
+/**
+ * Return the name of the pool
+ *
+ * @pool: Pool to get the name of
+ * Returns The name
+ */
+static inline const char *cvmx_fpa_get_name(uint64_t pool)
+{
+ return cvmx_fpa_pool_info[pool].name;
+}
+
+/**
+ * Return the base of the pool
+ *
+ * @pool: Pool to get the base of
+ * Returns The base
+ */
+static inline void *cvmx_fpa_get_base(uint64_t pool)
+{
+ return cvmx_fpa_pool_info[pool].base;
+}
+
+/**
+ * Check if a pointer belongs to an FPA pool. Return non-zero
+ * if the supplied pointer is inside the memory controlled by
+ * an FPA pool.
+ *
+ * @pool: Pool to check
+ * @ptr: Pointer to check
+ * Returns Non-zero if pointer is in the pool. Zero if not
+ */
+static inline int cvmx_fpa_is_member(uint64_t pool, void *ptr)
+{
+ return ((ptr >= cvmx_fpa_pool_info[pool].base) &&
+ ((char *)ptr <
+ ((char *)(cvmx_fpa_pool_info[pool].base)) +
+ cvmx_fpa_pool_info[pool].size *
+ cvmx_fpa_pool_info[pool].starting_element_count));
+}
+
+/**
+ * Enable the FPA for use. Must be performed after any CSR
+ * configuration but before any other FPA functions.
+ */
+static inline void cvmx_fpa_enable(void)
+{
+ union cvmx_fpa_ctl_status status;
+
+ status.u64 = cvmx_read_csr(CVMX_FPA_CTL_STATUS);
+ if (status.s.enb) {
+ cvmx_dprintf
+ ("Warning: Enabling FPA when FPA already enabled.\n");
+ }
+
+ /*
+ * Do runtime check as we allow pass1 compiled code to run on
+ * pass2 chips.
+ */
+ if (cvmx_octeon_is_pass1()) {
+ union cvmx_fpa_fpfx_marks marks;
+ int i;
+ for (i = 1; i < 8; i++) {
+ marks.u64 =
+ cvmx_read_csr(CVMX_FPA_FPF1_MARKS + (i - 1) * 8ull);
+ marks.s.fpf_wr = 0xe0;
+ cvmx_write_csr(CVMX_FPA_FPF1_MARKS + (i - 1) * 8ull,
+ marks.u64);
+ }
+
+ /* Enforce a 10 cycle delay between config and enable */
+ cvmx_wait(10);
+ }
+
+ /* FIXME: CVMX_FPA_CTL_STATUS read is unmodelled */
+ status.u64 = 0;
+ status.s.enb = 1;
+ cvmx_write_csr(CVMX_FPA_CTL_STATUS, status.u64);
+}
+
+/**
+ * Get a new block from the FPA
+ *
+ * @pool: Pool to get the block from
+ * Returns Pointer to the block or NULL on failure
+ */
+static inline void *cvmx_fpa_alloc(uint64_t pool)
+{
+ uint64_t address =
+ cvmx_read_csr(CVMX_ADDR_DID(CVMX_FULL_DID(CVMX_OCT_DID_FPA, pool)));
+ if (address)
+ return cvmx_phys_to_ptr(address);
+ else
+ return NULL;
+}
+
+/**
+ * Asynchronously get a new block from the FPA
+ *
+ * @scr_addr: Local scratch address to put response in. This is a byte address,
+ * but must be 8 byte aligned.
+ * @pool: Pool to get the block from
+ */
+static inline void cvmx_fpa_async_alloc(uint64_t scr_addr, uint64_t pool)
+{
+ cvmx_fpa_iobdma_data_t data;
+
+ /*
+ * Hardware only uses 64 bit aligned locations, so convert
+ * from byte address to 64-bit index
+ */
+ data.s.scraddr = scr_addr >> 3;
+ data.s.len = 1;
+ data.s.did = CVMX_FULL_DID(CVMX_OCT_DID_FPA, pool);
+ data.s.addr = 0;
+ cvmx_send_single(data.u64);
+}
+
+/**
+ * Free a block allocated with a FPA pool. Does NOT provide memory
+ * ordering in cases where the memory block was modified by the core.
+ *
+ * @ptr: Block to free
+ * @pool: Pool to put it in
+ * @num_cache_lines:
+ * Cache lines to invalidate
+ */
+static inline void cvmx_fpa_free_nosync(void *ptr, uint64_t pool,
+ uint64_t num_cache_lines)
+{
+ cvmx_addr_t newptr;
+ newptr.u64 = cvmx_ptr_to_phys(ptr);
+ newptr.sfilldidspace.didspace =
+ CVMX_ADDR_DIDSPACE(CVMX_FULL_DID(CVMX_OCT_DID_FPA, pool));
+ /* Prevent GCC from reordering around free */
+ barrier();
+ /* value written is number of cache lines not written back */
+ cvmx_write_io(newptr.u64, num_cache_lines);
+}
+
+/**
+ * Free a block allocated with a FPA pool. Provides required memory
+ * ordering in cases where memory block was modified by core.
+ *
+ * @ptr: Block to free
+ * @pool: Pool to put it in
+ * @num_cache_lines:
+ * Cache lines to invalidate
+ */
+static inline void cvmx_fpa_free(void *ptr, uint64_t pool,
+ uint64_t num_cache_lines)
+{
+ cvmx_addr_t newptr;
+ newptr.u64 = cvmx_ptr_to_phys(ptr);
+ newptr.sfilldidspace.didspace =
+ CVMX_ADDR_DIDSPACE(CVMX_FULL_DID(CVMX_OCT_DID_FPA, pool));
+ /*
+ * Make sure that any previous writes to memory go out before
+ * we free this buffer. This also serves as a barrier to
+ * prevent GCC from reordering operations to after the
+ * free.
+ */
+ CVMX_SYNCWS;
+ /* value written is number of cache lines not written back */
+ cvmx_write_io(newptr.u64, num_cache_lines);
+}
+
+/**
+ * Setup a FPA pool to control a new block of memory.
+ * This can only be called once per pool. Make sure proper
+ * locking enforces this.
+ *
+ * @pool: Pool to initialize
+ * 0 <= pool < 8
+ * @name: Constant character string to name this pool.
+ * String is not copied.
+ * @buffer: Pointer to the block of memory to use. This must be
+ * accessible by all processors and external hardware.
+ * @block_size: Size for each block controlled by the FPA
+ * @num_blocks: Number of blocks
+ *
+ * Returns 0 on Success,
+ * -1 on failure
+ */
+extern int cvmx_fpa_setup_pool(uint64_t pool, const char *name, void *buffer,
+ uint64_t block_size, uint64_t num_blocks);
+
+/**
+ * Shutdown a Memory pool and validate that it had all of
+ * the buffers originally placed in it. This should only be
+ * called by one processor after all hardware has finished
+ * using the pool.
+ *
+ * @pool: Pool to shutdown
+ * Returns Zero on success
+ * - Positive is count of missing buffers
+ * - Negative is too many buffers or corrupted pointers
+ */
+extern uint64_t cvmx_fpa_shutdown_pool(uint64_t pool);
+
+/**
+ * Get the size of blocks controlled by the pool
+ * This is resolved to a constant at compile time.
+ *
+ * @pool: Pool to access
+ * Returns Size of the block in bytes
+ */
+uint64_t cvmx_fpa_get_block_size(uint64_t pool);
+
+#endif /* __CVM_FPA_H__ */
OpenPOWER on IntegriCloud