summaryrefslogtreecommitdiffstats
path: root/arch/mips/ddb5xxx/ddb5477/setup.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/mips/ddb5xxx/ddb5477/setup.c')
-rw-r--r--arch/mips/ddb5xxx/ddb5477/setup.c22
1 files changed, 11 insertions, 11 deletions
diff --git a/arch/mips/ddb5xxx/ddb5477/setup.c b/arch/mips/ddb5xxx/ddb5477/setup.c
index 15c6e543b56f..d62f5a789b05 100644
--- a/arch/mips/ddb5xxx/ddb5477/setup.c
+++ b/arch/mips/ddb5xxx/ddb5477/setup.c
@@ -141,7 +141,7 @@ static void __init ddb_time_init(void)
/* mips_hpt_frequency is 1/2 of the cpu core freq */
i = (read_c0_config() >> 28 ) & 7;
- if ((current_cpu_data.cputype == CPU_R5432) && (i == 3))
+ if ((current_cpu_data.cputype == CPU_R5432) && (i == 3))
i = 4;
mips_hpt_frequency = bus_frequency*(i+4)/4;
}
@@ -298,11 +298,11 @@ static void __init ddb5477_board_init(void)
if (mips_machtype == MACH_NEC_ROCKHOPPER
|| mips_machtype == MACH_NEC_ROCKHOPPERII) {
- /* Disable bus diagnostics. */
+ /* Disable bus diagnostics. */
ddb_out32(DDB_PCICTL0_L, 0);
ddb_out32(DDB_PCICTL0_H, 0);
ddb_out32(DDB_PCICTL1_L, 0);
- ddb_out32(DDB_PCICTL1_H, 0);
+ ddb_out32(DDB_PCICTL1_H, 0);
}
if (mips_machtype == MACH_NEC_ROCKHOPPER) {
@@ -354,7 +354,7 @@ static void __init ddb5477_board_init(void)
*/
pci_write_config_byte(&dev_m1533, 0x58, 0x74);
- /*
+ /*
* positive decode (bit6 -0)
* enable IDE controler interrupt (bit 4 -1)
* setup SIRQ to point to IRQ 14 (bit 3:0 - 1101)
@@ -364,31 +364,31 @@ static void __init ddb5477_board_init(void)
/* Setup M5229 registers */
dev_m5229.bus = &bus;
dev_m5229.sysdata = NULL;
- dev_m5229.devfn = 4*8; // slot 4 (AD15): M5229 IDE
+ dev_m5229.devfn = 4*8; // slot 4 (AD15): M5229 IDE
/*
* enable IDE in the M5229 config register 0x50 (bit 0 - 1)
- * M5229 IDSEL is addr:15; see above setting
+ * M5229 IDSEL is addr:15; see above setting
*/
pci_read_config_byte(&dev_m5229, 0x50, &temp8);
pci_write_config_byte(&dev_m5229, 0x50, temp8 | 0x1);
- /*
- * enable bus master (bit 2) and IO decoding (bit 0)
+ /*
+ * enable bus master (bit 2) and IO decoding (bit 0)
*/
pci_read_config_byte(&dev_m5229, 0x04, &temp8);
pci_write_config_byte(&dev_m5229, 0x04, temp8 | 0x5);
/*
* enable native, copied from arch/ppc/k2boot/head.S
- * TODO - need volatile, need to be portable
+ * TODO - need volatile, need to be portable
*/
pci_write_config_byte(&dev_m5229, 0x09, 0xef);
- /* Set Primary Channel Command Block Timing */
+ /* Set Primary Channel Command Block Timing */
pci_write_config_byte(&dev_m5229, 0x59, 0x31);
- /*
+ /*
* Enable primary channel 40-pin cable
* M5229 register 0x4a (bit 0)
*/
OpenPOWER on IntegriCloud