summaryrefslogtreecommitdiffstats
path: root/arch/mips/cobalt/setup.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/mips/cobalt/setup.c')
-rw-r--r--arch/mips/cobalt/setup.c97
1 files changed, 32 insertions, 65 deletions
diff --git a/arch/mips/cobalt/setup.c b/arch/mips/cobalt/setup.c
index a4b69b543bd9..d0dd81790f74 100644
--- a/arch/mips/cobalt/setup.c
+++ b/arch/mips/cobalt/setup.c
@@ -19,12 +19,10 @@
#include <asm/bootinfo.h>
#include <asm/time.h>
#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/processor.h>
#include <asm/reboot.h>
#include <asm/gt64120.h>
-#include <asm/mach-cobalt/cobalt.h>
+#include <cobalt.h>
extern void cobalt_machine_restart(char *command);
extern void cobalt_machine_halt(void);
@@ -63,61 +61,38 @@ void __init plat_timer_setup(struct irqaction *irq)
GT_WRITE(GT_INTRMASK_OFS, GT_INTR_T0EXP_MSK | GT_READ(GT_INTRMASK_OFS));
}
-extern struct pci_ops gt64111_pci_ops;
-
-static struct resource cobalt_mem_resource = {
- .start = GT_DEF_PCI0_MEM0_BASE,
- .end = GT_DEF_PCI0_MEM0_BASE + GT_DEF_PCI0_MEM0_SIZE - 1,
- .name = "PCI memory",
- .flags = IORESOURCE_MEM
-};
-
-static struct resource cobalt_io_resource = {
- .start = 0x1000,
- .end = 0xffff,
- .name = "PCI I/O",
- .flags = IORESOURCE_IO
-};
-
-static struct resource cobalt_io_resources[] = {
- {
+/*
+ * Cobalt doesn't have PS/2 keyboard/mouse interfaces,
+ * keyboard conntroller is never used.
+ * Also PCI-ISA bridge DMA contoroller is never used.
+ */
+static struct resource cobalt_reserved_resources[] = {
+ { /* dma1 */
.start = 0x00,
.end = 0x1f,
- .name = "dma1",
- .flags = IORESOURCE_BUSY
- }, {
- .start = 0x40,
- .end = 0x5f,
- .name = "timer",
- .flags = IORESOURCE_BUSY
- }, {
+ .name = "reserved",
+ .flags = IORESOURCE_BUSY | IORESOURCE_IO,
+ },
+ { /* keyboard */
.start = 0x60,
.end = 0x6f,
- .name = "keyboard",
- .flags = IORESOURCE_BUSY
- }, {
+ .name = "reserved",
+ .flags = IORESOURCE_BUSY | IORESOURCE_IO,
+ },
+ { /* dma page reg */
.start = 0x80,
.end = 0x8f,
- .name = "dma page reg",
- .flags = IORESOURCE_BUSY
- }, {
+ .name = "reserved",
+ .flags = IORESOURCE_BUSY | IORESOURCE_IO,
+ },
+ { /* dma2 */
.start = 0xc0,
.end = 0xdf,
- .name = "dma2",
- .flags = IORESOURCE_BUSY
+ .name = "reserved",
+ .flags = IORESOURCE_BUSY | IORESOURCE_IO,
},
};
-#define COBALT_IO_RESOURCES (sizeof(cobalt_io_resources)/sizeof(struct resource))
-
-static struct pci_controller cobalt_pci_controller = {
- .pci_ops = &gt64111_pci_ops,
- .mem_resource = &cobalt_mem_resource,
- .mem_offset = 0,
- .io_resource = &cobalt_io_resource,
- .io_offset = 0 - GT_DEF_PCI0_IO_BASE,
-};
-
void __init plat_mem_setup(void)
{
static struct uart_port uart;
@@ -130,12 +105,12 @@ void __init plat_mem_setup(void)
set_io_port_base(CKSEG1ADDR(GT_DEF_PCI0_IO_BASE));
- /* I/O port resource must include UART and LCD/buttons */
+ /* I/O port resource must include LCD/buttons */
ioport_resource.end = 0x0fffffff;
- /* request I/O space for devices used on all i[345]86 PCs */
- for (i = 0; i < COBALT_IO_RESOURCES; i++)
- request_resource(&ioport_resource, cobalt_io_resources + i);
+ /* These resources have been reserved by VIA SuperI/O chip. */
+ for (i = 0; i < ARRAY_SIZE(cobalt_reserved_resources); i++)
+ request_resource(&ioport_resource, cobalt_reserved_resources + i);
/* Read the cobalt id register out of the PCI config space */
PCI_CFG_SET(devfn, (VIA_COBALT_BRD_ID_REG & ~0x3));
@@ -145,28 +120,20 @@ void __init plat_mem_setup(void)
printk("Cobalt board ID: %d\n", cobalt_board_id);
-#ifdef CONFIG_PCI
- register_pci_controller(&cobalt_pci_controller);
-#endif
-
-#ifdef CONFIG_SERIAL_8250
if (cobalt_board_id > COBALT_BRD_ID_RAQ1) {
-
-#ifdef CONFIG_EARLY_PRINTK
- cobalt_early_console();
-#endif
-
+#ifdef CONFIG_SERIAL_8250
uart.line = 0;
uart.type = PORT_UNKNOWN;
uart.uartclk = 18432000;
uart.irq = COBALT_SERIAL_IRQ;
- uart.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
- uart.iobase = 0xc800000;
- uart.iotype = UPIO_PORT;
+ uart.flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF |
+ UPF_SKIP_TEST;
+ uart.iotype = UPIO_MEM;
+ uart.mapbase = 0x1c800000;
early_serial_setup(&uart);
- }
#endif
+ }
}
/*
OpenPOWER on IntegriCloud