diff options
Diffstat (limited to 'arch/mips/alchemy/pb1200/board_setup.c')
| -rw-r--r-- | arch/mips/alchemy/pb1200/board_setup.c | 162 |
1 files changed, 0 insertions, 162 deletions
diff --git a/arch/mips/alchemy/pb1200/board_setup.c b/arch/mips/alchemy/pb1200/board_setup.c deleted file mode 100644 index 6cb2115059ad..000000000000 --- a/arch/mips/alchemy/pb1200/board_setup.c +++ /dev/null @@ -1,162 +0,0 @@ -/* - * - * BRIEF MODULE DESCRIPTION - * Alchemy Pb1200/Db1200 board setup. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include <linux/init.h> -#include <linux/sched.h> - -#include <prom.h> -#include <au1xxx.h> - -extern void _board_init_irq(void); -extern void (*board_init_irq)(void); - -void board_reset(void) -{ - bcsr->resets = 0; - bcsr->system = 0; -} - -void __init board_setup(void) -{ - char *argptr = NULL; - -#if 0 - { - u32 pin_func; - - /* - * Enable PSC1 SYNC for AC97. Normaly done in audio driver, - * but it is board specific code, so put it here. - */ - pin_func = au_readl(SYS_PINFUNC); - au_sync(); - pin_func |= SYS_PF_MUST_BE_SET | SYS_PF_PSC1_S1; - au_writel(pin_func, SYS_PINFUNC); - - au_writel(0, (u32)bcsr | 0x10); /* turn off PCMCIA power */ - au_sync(); - } -#endif - -#if defined(CONFIG_I2C_AU1550) - { - u32 freq0, clksrc; - u32 pin_func; - - /* Select SMBus in CPLD */ - bcsr->resets &= ~BCSR_RESETS_PCS0MUX; - - pin_func = au_readl(SYS_PINFUNC); - au_sync(); - pin_func &= ~(SYS_PINFUNC_P0A | SYS_PINFUNC_P0B); - /* Set GPIOs correctly */ - pin_func |= 2 << 17; - au_writel(pin_func, SYS_PINFUNC); - au_sync(); - - /* The I2C driver depends on 50 MHz clock */ - freq0 = au_readl(SYS_FREQCTRL0); - au_sync(); - freq0 &= ~(SYS_FC_FRDIV1_MASK | SYS_FC_FS1 | SYS_FC_FE1); - freq0 |= 3 << SYS_FC_FRDIV1_BIT; - /* 396 MHz / (3 + 1) * 2 == 49.5 MHz */ - au_writel(freq0, SYS_FREQCTRL0); - au_sync(); - freq0 |= SYS_FC_FE1; - au_writel(freq0, SYS_FREQCTRL0); - au_sync(); - - clksrc = au_readl(SYS_CLKSRC); - au_sync(); - clksrc &= ~(SYS_CS_CE0 | SYS_CS_DE0 | SYS_CS_ME0_MASK); - /* Bit 22 is EXTCLK0 for PSC0 */ - clksrc |= SYS_CS_MUX_FQ1 << SYS_CS_ME0_BIT; - au_writel(clksrc, SYS_CLKSRC); - au_sync(); - } -#endif - -#ifdef CONFIG_FB_AU1200 - argptr = prom_getcmdline(); -#ifdef CONFIG_MIPS_PB1200 - strcat(argptr, " video=au1200fb:panel:bs"); -#endif -#ifdef CONFIG_MIPS_DB1200 - strcat(argptr, " video=au1200fb:panel:bs"); -#endif -#endif - - /* - * The Pb1200 development board uses external MUX for PSC0 to - * support SMB/SPI. bcsr->resets bit 12: 0=SMB 1=SPI - */ -#ifdef CONFIG_I2C_AU1550 - bcsr->resets &= ~BCSR_RESETS_PCS0MUX; -#endif - au_sync(); - -#ifdef CONFIG_MIPS_PB1200 - printk(KERN_INFO "AMD Alchemy Pb1200 Board\n"); -#endif -#ifdef CONFIG_MIPS_DB1200 - printk(KERN_INFO "AMD Alchemy Db1200 Board\n"); -#endif - - /* Setup Pb1200 External Interrupt Controller */ - board_init_irq = _board_init_irq; -} - -int board_au1200fb_panel(void) -{ - BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR; - int p; - - p = bcsr->switches; - p >>= 8; - p &= 0x0F; - return p; -} - -int board_au1200fb_panel_init(void) -{ - /* Apply power */ - BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR; - - bcsr->board |= BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD | BCSR_BOARD_LCDBL; - /* printk(KERN_DEBUG "board_au1200fb_panel_init()\n"); */ - return 0; -} - -int board_au1200fb_panel_shutdown(void) -{ - /* Remove power */ - BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR; - - bcsr->board &= ~(BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD | - BCSR_BOARD_LCDBL); - /* printk(KERN_DEBUG "board_au1200fb_panel_shutdown()\n"); */ - return 0; -} |
